- tor-relays - lists.torproject.org

Re: [tor-relays] tor-relays Digest, Vol 20, Issue 24
by Mike Edwards 30 Sep '12

30 Sep '12

Hi, thanks all. It looks like the port forwarding is not working. I get the message below when I try the test suggested. I guess it must be something to do with the modem router and when I get a chance I'll try testing if I can get any incoming traffic - not sure how best to do this though...maybe set up an FTP server and try to access it! I'm also thinking of using a proxy. My friend suggested hidemyass.com any other suggestions would be really gratefully received. Thanks again, all really helpful replies. Cheers, M The requested resource could not be loaded. libcurl returned the error: couldn't connect to host

1 0

Directory Port Reachability Test Failed?
by Mike Edwards 28 Sep '12

28 Sep '12

Hi There, I have been keeping a causal eye on Tor for quite a few years now and have been getting more and more worried about the data/meta data that is being collected and the known and unknown micro and macro ways in which it can be used to harm/manipulate individuals, groups and societies. Anyway, last week I got a new Android phone and installed Orbot and then happened to watched the latest Juiced Media Rap News which prompted me to set up Tor on my Linux laptop. Since then I have (for the last few days) been trying to set up a Tor relay to help the community but haven't managed. I have read quite a few guides including the one on the TorProject site (https://www.torproject.org/docs/tor-doc-relay.html.en) I'm pretty stuck and hoping someone might be able to help? My hardware set up is: Boradband phone line into > modem router (no wireless and only 1 out going Ethernet port - I have tried login into this box but can't!) plugged in via Eithernet into > Netgear wireless router which communicates over wireless with my > Thinkpad laptop running Ubuntu 12.04 (see a photo my modem router and wireless router set-up here: http://flossnotes.blogspot.co.uk/2012/09/tor-relay.html ) I have Tor set up as a relay as per the configuration guide (see screenshots of the "Sharing tab (everything else is default)*. I have set up port forwarding on the Netgear wireless router for ports 9001 and 9030 (see screenshot*). I have stopped my Laptops fire wall using Fire Starter. And, in desperation I have even set-up my laptops IP in the DMZ settings on the Netgear wireless router (see screenshot*) *photos and screen shots here: http://flossnotes.blogspot.co.uk/2012/09/tor-relay.html Again in more detail... 1) I have Tor running and my internet traffic from Firefox is going through it. I know this because when I visit: https://check.torproject.org/ I'm met with the message "Congratulations. Your browser is configured to use Tor" and I get these messages in the Tor message log "[Fri Sep 28 14:22:32 2012] The Tor Software is Running - You are currently running version "0.2.3.22-rc (git-4a0c70a817797420)" of the Tor software." "[Fri Sep 28 14:23:28 2012] External IP Address Changed - Tor has determined your relay's public IP address is currently xx.xxx.xx.106. If that is not correct, please consider setting the 'Address' option in your relay's configuration." "[Fri Sep 28 14:23:38 2012] Connected to the Tor Network - We were able to successfully establish a connection to the Tor network. You can now configure your applications to use the Internet anonymously." 2) I have followed the configuring Tor relay guide and get these messages, "[Fri Sep 28 14:23:38 2012] Checking Server Port Reachability - Tor is trying to determine if your relay's server port is reachable from the Tor network by connecting to itself at xx.xxx.xx.106:9001. This test could take several minutes." "[Fri Sep 28 14:43:28 2012] Server Port Reachability Test Failed - Your relay's server port is not reachable by other Tor clients. This can happen if you are behind a router or firewall that requires you to set up port forwarding. If xx.xxx.xx.106:9001 is not your correct IP address and server port, please check your relay's configuration." (I get the same message for port 9030 - Directory) 3) I have configured my Netgear router to forward ports 9001 and 9030 asa per the instructions here: http://portforward.com/english/routers/port_forwarding/Dlink/DIR-655/ 4) I have stopped my laptops firewall. 5) On the Netgear router I have set up my laptops IP to sit outside of the firewall in the "DMZ" so as far as I understand, it should be exposed to all external requests! Sorry for such a long first post. I'm pretty frustrated! Any help would be much appreciated. Cheers, Mike

3 2

Re: [tor-relays] Directory Port Reachability Test Failed?
by eliaz 28 Sep '12

28 Sep '12

This link may be relevant: https://trac.torproject.org/projects/tor/ticket/6979 It relates to what seems to be the same problem, occurring on the latest version (ver .39, TBB for windows). - eli On 9/28/2012 12:48 PM, Mike Edwards wrote: [snip] > "[Fri Sep 28 14:23:28 2012] External IP Address Changed - Tor has > determined your relay's public IP address is currently xx.xxx.xx.106. If > that is not correct, please consider setting the 'Address' option in > your relay's configuration." [snip] > 2) I have followed the configuring Tor relay guide and get these messages, > > "[Fri Sep 28 14:23:38 2012] Checking Server Port Reachability - Tor is > trying to determine if your relay's server port is reachable from the > Tor network by connecting to itself at xx.xxx.xx.106:9001. This test > could take several minutes." > > "[Fri Sep 28 14:43:28 2012] Server Port Reachability Test Failed - Your > relay's server port is not reachable by other Tor clients. This can > happen if you are behind a router or firewall that requires you to set > up port forwarding. If xx.xxx.xx.106:9001 is not your correct IP address > and server port, please check your relay's configuration." > tor-relays mailing list > tor-relays(a)lists.torproject.org > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays [snip]

1 0

about setting up a tor exit node
by esolve esolve 27 Sep '12

27 Sep '12

Hi, I installed tor browser bundle and I want to use vidalia to set up a tor exit node with my computer. However, I have problem in port forwarding, my computer is inside an institute, and I'm not clear about the firewall setting. Is there any method for me to check the firewall setting and make a hole on it? thanks!

2 3

Re: [tor-relays] some questions
by eliaz 26 Sep '12

26 Sep '12

I can't answer your questions, but to help with problems I've been having, can you say which version of the TBB you're running, & on what OS? - eli On 9/24/2012 1:37 PM, esolve esolve wrote: > Hi, all: > > I'm newbee here. I have some questions: > > I'm using tor with vidallia as a TOR client and I use > wireshark/tcpdump to capture the packets, I notice that in vidalia, when > I select "view the network" and in the "connection status" window, I can > see many hosts, I think they are entry nodes which my tor client is > connecting to, so it means there are many circuits established for my > tor client. But the Tor web browser shows that my ip address appears to > be 80.237.226.73, so this is the only exit nodes. So how can I know > which entry node (or circuit) I'm actually using with this exit node? > > The tcp stream between the tor client and the entry node should be > TLS-encrypted, but when I open a web page, I noticed that the stream is > actually TCP not TLS, is there anything wrong? > > > > Beisides, I want to use my computer as an exit node and I use > vidalia to enable it, however, I noticed on the "connection status" > window that many nodes failed to connect to my computer, are there > anything that should be taken care of in setting up an exit node? > > thanks! > > > > > _______________________________________________ > tor-relays mailing list > tor-relays(a)lists.torproject.org > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays > -- gpg: 0x3E346824

1 0

Re: [tor-relays] Bridge relay: conversing with the message log
by eliaz 26 Sep '12

26 Sep '12

Well, I'm glad I didn't listen. TBB ver 0.2.2.39 gave me a hell of a time before a recognizable bug msg came thru in the log. Had to roll back to ver .38 in order to get the bridge reliably online again. - eli On 9/22/2012 7:57 AM, Roger Dingledine wrote: > On Thu, Sep 20, 2012 at 08:25:05AM -0400, eliaz wrote: >> Despite these info lines Tor finally claims success. Does this mean >> that I can ignore the previous info lines? Or are they telling me that >> I have to do something? As far as I can tell my bridge is working fine. > > Tor logs at log-level notice by default for a reason -- we don't expect > you to look at, or understand, info or debug logs. > > Or said another way, if Tor isn't complaining to you with notice, warn, > or err messages, you can assume everything is going smoothly. > > See also > https://trac.torproject.org/projects/tor/wiki/doc/TorFAQ#Whatloglevelshould… > > --Roger > > _______________________________________________ > tor-relays mailing list > tor-relays(a)lists.torproject.org > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays > -- gpg: 0x3E346824

1 0

some questions
by esolve esolve 24 Sep '12

24 Sep '12

Hi, all: I'm newbee here. I have some questions: I'm using tor with vidallia as a TOR client and I use wireshark/tcpdump to capture the packets, I notice that in vidalia, when I select "view the network" and in the "connection status" window, I can see many hosts, I think they are entry nodes which my tor client is connecting to, so it means there are many circuits established for my tor client. But the Tor web browser shows that my ip address appears to be 80.237.226.73, so this is the only exit nodes. So how can I know which entry node (or circuit) I'm actually using with this exit node? The tcp stream between the tor client and the entry node should be TLS-encrypted, but when I open a web page, I noticed that the stream is actually TCP not TLS, is there anything wrong? Beisides, I want to use my computer as an exit node and I use vidalia to enable it, however, I noticed on the "connection status" window that many nodes failed to connect to my computer, are there anything that should be taken care of in setting up an exit node? thanks!

1 0

Tor Weather Statistics
by tagnaq 23 Sep '12

23 Sep '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi Torproject, would you mind publishing a few Tor Weather statistics? (I assume publishing this information is safe) How many relays have at least one Tor Weather subscription? How many subscriptions did tick the checkbox for: 'Email me when the router's Tor version is out of date'? How many 'Node Out of Date!' emails did you send out today? :) -----BEGIN PGP SIGNATURE----- iF4EAREKAAYFAlBfZgsACgkQyM26BSNOM7ZmgwD8CEj9H64NF0lePd+Cr65ECcLW 1CvFTbZau/m/3m7Ef9kA/3S+cGJfcS6xPtHcNZbnRa9FC8QXlP6P9QAgkhXhny2b =3lHr -----END PGP SIGNATURE-----

1 0

'critical' security update: Tor 0.2.2.39
by tagnaq 23 Sep '12

23 Sep '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 It is quite sad that one has to find out about 'critical' security updates [0] via an unrelated thread on tor-talk [1] or the blog [2] instead of getting an announcement on tor-announce [3] - where relay operators are probably expecting such information. Are tor versions 0.2.3.x and 0.2.4.x affected too? [0] https://gitweb.torproject.org/tor.git/blob/release-0.2.2:/ReleaseNotes https://trac.torproject.org/projects/tor/ticket/6811 [1] https://lists.torproject.org/pipermail/tor-talk/2012-September/025525.html [2] https://blog.torproject.org/blog/new-bundles-security-release [3] https://lists.torproject.org/pipermail/tor-announce/ -----BEGIN PGP SIGNATURE----- iF4EAREKAAYFAlBUV7cACgkQyM26BSNOM7ZeyAEArFSwM5Z0fhtXV6q7pdK9CqXV coEuuHUFrm6gjzkQ+p8A/2z2e+x4sYuJzKhlvFKnwCURw93FSqWEt5MCFRpkd6rV =FkRi -----END PGP SIGNATURE-----

2 3

bridge usage-panel behavior
by eliaz 22 Sep '12

22 Sep '12

Over the last week or so my bridge usage has been zero, whereas previously it would show clients for at least a few and usually many countries. The only exception is China, which comes up well within an hour of enabling the bridge. Usually the usage display stops at 1-8, but sometimes it shows continuing Chinese use. The bandwidth graph sometimes shows high, but not extraordinary, traffic. Usually it's quiet, and there's been no filling-up of the bandwidth. At a machine running through a different ISP, I logged on as a client looking to use my bridge address. As expected, when I got home I saw that the bridge usage registered USA 1-8 as well as the usual China 1-x. From this experiment I gather at least that my setup is working fine. So I'm wondering if the Chinese client(s) is/are inhibiting other contacts, and if so, if this apparent locking onto China is a network glitch or intentional interference. As the first step I thought I'd ask here: Has anyone else noticed an apparent locking of China (or some other country) in your usage panel? - Thanks, eli

1 0