October 2018 - tor-relays - lists.torproject.org

new log message: [warn] Unparseable microdescriptor
by Toralf Förster 30 Oct '18

30 Oct '18

Get this at my exit relay since yesterday: # head /tmp/warn.log Oct 23 23:30:17.000 [notice] Tor 0.3.5.3-alpha opening new log file. Oct 23 23:30:33.000 [warn] parse error: internal NUL character. Oct 23 23:30:33.000 [warn] Unparseable microdescriptor Oct 23 23:30:33.000 [warn] parse error: internal NUL character. Oct 23 23:30:33.000 [warn] Unparseable microdescriptor even with log level "debug" there seems to be no more information. Anything I should worry about? -- Toralf PGP C4EACDDE 0076E94E

3 3

Re: [tor-relays] New to Tor Relay, using Rasberry Pi3. Grateful for Help
by Judd Briggs 27 Oct '18

27 Oct '18

HI Matt and Felix. Thank you so much for the guidance. Matt you are right, I never really asked a question, but I think you have helped steer me in the right direction. Alex: Yes...typo on ORport....will fix that. Log file: Yes, it is in the right location, but crazily just stops....clean stop! Also, I went back and seriously studied the relay page. The RaspPi part is a bit confusing especially now, if Pi3 are not a problem, why does it state there is a problem?. But I understand wtih Pi3, more Debian items (TOR) are stable I will add to my source list Debian location which should allow me to update to the latest stable TOR on Debian. Can I have more than one source in the sourcelist? I had another question about the gg2g key thingy...I can't find the exact place in the Tor website. Wasn't sure where to do apt-get "?what?" Give me a couple of days to get back to you on my progress. Regarding the other question asked...yes, I restated like you posted. In next update, I will provide terminal window information. Thanks and best regards, Judd ************************************************************ Date: Fri, 26 Oct 2018 21:31:57 +0200 From: Felix <zwiebel(a)quantentunnel.de> To: tor-relays(a)lists.torproject.org Subject: Re: [tor-relays] New to Tor Relay, using Rasberry Pi3. Grateful for Help Message-ID: <5BD36BAD.4010005(a)quantentunnel.de> Content-Type: text/plain; charset=utf-8 Hi Judge The torrc shows 'ORPORT' instead of 'ORPort'. I remember some issues with case sensitive torrc entries. Can you try 'ORPort' ? SocksPort 0 Log notice file /var/log/tor/notices.log RunAsDaemon 1 ORPORT 9001 DirPort 9030 ExitPolicy reject *.* RelayBandwidthRate 200 KB RelayBandwidthBurst 400KB -> ORPort 9001 PS: *Lebowski1* how cool! -- Cheers, Felix ------------------------------ Date: Fri, 26 Oct 2018 08:59:09 -0400 From: Matt Traudt <pastly(a)torproject.org> To: tor-relays(a)lists.torproject.org Subject: Re: [tor-relays] New to Tor Relay, using Rasberry Pi3. Grateful for Help Message-ID: <0736abd6-3b7a-c5ff-a300-da79da2c0ddd(a)torproject.org> Content-Type: text/plain; charset=utf-8 On 10/26/18 08:38, Judd Briggs wrote: > Good evening, thanks for taking the time to help me. > > I am fairly new to Pi, Linux/Raspbian, and TOR. But I believe in what > TOR stands for so I wanted to do something with the Pi I had sitting around. > > [... snip ...] > > Appreciate any help. And by the way, i did go back and look through the > archives over the last several months and didn't find a solution. > > Best regards, > > Judge > Thanks for running a relay! You never actually asked a question so I can only guess what you're problem is and what you're looking for help on. In short, see Tor's official relay guide: https://trac.torproject.org/projects/tor/wiki/TorRelayGuide # Version 0.2.9.15 is part of the LTS release series and is an okay version to be running. If you're looking for a newer version of Tor, you'll need to add the Tor Project Debian repos. https://www.torproject.org/docs/debian.html.en#ubuntu Note that I'm only pretty sure the tor you'll get from there will work on rpi 3. Read the warnings on the page. # Am I running a relay correctly? Your torrc looks correct for running a non-exit relay. The logs you shared don't have the lines that I'd expect for any type of relay. Is your torrc located at /etc/tor/torrc? Did you start Tor via systemd like 'sudo systemctl restart tor' or from the command line manually? Hope that helps. Matt *******************************************************************************

1 0

Restore tor exit node
by node47＠torsrv.de 27 Oct '18

27 Oct '18

Dear all, I have the following problem: My VPS-Hoster has deleted my server. Now I reinstalled tor on fresh Debian 9 minimal in version 0.3.4.8 (as before). I also restored my keys from /var/lib/tor/keys and set the datadir in torrc to /var/lib/tor When I started the tor-service a new ed25519_signing_cert and ed25519_signing_secret_key were generated as well as a new fingerprint. The secret_* files still have the old timestamp but new fingerprint had been created. Now the server is listed 3 times in the relaysearch and my node is known as “new” node instead of getting the old fingerprint and the old flags/status. Who can assist me in how to do the restore of the fingerprint and how to correct the relaysearch?! Best regards from Germany Max

4 3

Restore tor exit node
by node47＠torsrv.de 26 Oct '18

26 Oct '18

Dear all, I have the following problem: My VPS-Hoster has deleted my server. Now I reinstalled tor on fresh Debian 9 minimal (as before) in version 0.3.4.8 I restored my keys from /var/lib/tor/keys and set the datadir in torrc to /var/lib/tor When I started the tor-service a new ed25519_signing_cert and ed25519_signing_secret_key were generated as well as a new fingerprint. The secret_* files still have the old timestamp but new fingerprint had been created. Now the server is listed 3 times in the relaysearch and my node is known as “new” node instead of getting the old fingerprint and the old flags/status. Who can assist me in how to do the restore of the fingerprint and how to correct the relaysearch?! Best regards from Germany Max

1 0

Something Keeps Causing Tor Relay Software To Automatically Close On Windows 10?
by Keifer Bly 26 Oct '18

26 Oct '18

Hello, So for my bridge running on Windows 10, for some reason the tor expert bundle automatically closes after 1-2 days, as in the process just stops and the command line window it is in just closes. As you can imagine, this is frustrating for keeping the bridge stable and all. It is strange that this is happening as I am not closing the software it just shuts off automatically for some reason. Some of my thoughts on what could be causing this: 1. In my experience, the Windows CMD (which the tor expert bundle runs through) has the habit to automatically close the second a program sends a signal that isn’t immediately recognized by Windows, even if the command is from the program itself. I wonder if this could be the issue… 2. I will try running tor.exe as administrator and see if it happens again, maybe it’s an issue with the software not having enough permissions from the OS? Another thing I am trying this time is that according to https://ccm.net/faq/2353-prevent-the-command-prompt-closing-automatically, running the command cmd -K in the beginning should prevent the CMD from auto closing. Any other thoughts on why this might be happening is appreciated. The tor version is tor 0.3.4.8 on Windows 10. Thanks. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

New to Tor Relay, using Rasberry Pi3. Grateful for Help
by Judd Briggs 26 Oct '18

26 Oct '18

Good evening, thanks for taking the time to help me. I am fairly new to Pi, Linux/Raspbian, and TOR. But I believe in what TOR stands for so I wanted to do something with the Pi I had sitting around. i have a clean install of Rasbian on my Pi3.I followed an Instructables guide to get most all of my settings for installing TorAll my Apt-gets update and upgrades are current.I am running Tor ver 0.2.9.15 (I need to figure out how to painlessless update that) Apparantely that is the latest version in the sources file. Below is my sources file content: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi# Uncomment line below then 'apt-get update' to enable 'apt-get source'deb-src http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi#deb http://deb.torproject.org/torproject.org Rasbian main Here is my log file contents: Oct 25 21:23:04.000 [notice] Tor 0.2.9.15 (git-2dc1a1a2abab5403) opening new log file.Oct 25 21:23:04.579 [notice] Tor 0.2.9.15 (git-2dc1a1a2abab5403) running on Linux with Libevent 2.0.21-stable, OpenSSL 1.1.0f and Zlib 1.2.8.Oct 25 21:23:04.579 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warningOct 25 21:23:04.579 [notice] Read configuration file "/usr/share/tor/tor-service-defaults-torrc".Oct 25 21:23:04.579 [notice] Read configuration file "/etc/tor/torrc".Oct 25 21:23:04.593 [notice] Opening Socks listener on 127.0.0.1:9050Oct 25 21:23:04.000 [notice] Parsing GEOIP IPv4 file /usr/share/tor/geoip.Oct 25 21:23:05.000 [notice] Parsing GEOIP IPv6 file /usr/share/tor/geoip6.Oct 25 21:23:06.000 [notice] Bootstrapped 0%: StartingOct 25 21:23:06.000 [notice] Signaled readiness to systemdOct 25 21:23:07.000 [notice] Opening Socks listener on /var/run/tor/socksOct 25 21:23:07.000 [notice] Opening Control listener on /var/run/tor/controlOct 25 21:23:07.000 [notice] Bootstrapped 5%: Connecting to directory serverOct 25 21:23:07.000 [notice] Bootstrapped 10%: Finishing handshake with directory serverOct 25 21:23:09.000 [notice] Bootstrapped 15%: Establishing an encrypted directory connectionOct 25 21:23:09.000 [notice] Bootstrapped 20%: Asking for networkstatus consensusOct 25 21:23:09.000 [notice] Bootstrapped 25%: Loading networkstatus consensusOct 25 21:23:20.000 [notice] I learned some more directory information, but not enough to build a circuit: We have no usable consensus.Oct 25 21:23:20.000 [notice] Bootstrapped 40%: Loading authority key certsOct 25 21:23:21.000 [notice] Bootstrapped 45%: Asking for relay descriptorsOct 25 21:23:21.000 [notice] I learned some more directory information, but not enough to build a circuit: We need more microdescriptors: we have 0/6404, and can only build 0% of likely paths. (We have 0% of guards bw, 0% of midpoint bw, and 0% of exit bw = 0% of path bw.)Oct 25 21:23:23.000 [notice] Bootstrapped 50%: Loading relay descriptorsOct 25 21:23:23.000 [notice] I learned some more directory information, but not enough to build a circuit: We need more microdescriptors: we have 0/6404, and can only build 0% of likely paths. (We have 0% of guards bw, 0% of midpoint bw, and 0% of exit bw = 0% of path bw.)Oct 25 21:23:25.000 [notice] Bootstrapped 56%: Loading relay descriptorsOct 25 21:23:25.000 [notice] Bootstrapped 65%: Loading relay descriptorsOct 25 21:23:25.000 [notice] Bootstrapped 71%: Loading relay descriptorsOct 25 21:23:25.000 [notice] Bootstrapped 78%: Loading relay descriptorsOct 25 21:23:26.000 [notice] Bootstrapped 80%: Connecting to the Tor networkOct 25 21:23:26.000 [notice] Bootstrapped 90%: Establishing a Tor circuitOct 25 21:23:27.000 [notice] Tor has successfully opened a circuit. Looks like client functionality is working.Oct 25 21:23:27.000 [notice] Bootstrapped 100%: DoneOct 25 21:58:10.000 [notice] Interrupt: exiting cleanly.(END) My torrc file is as follows...sorry there are lots of things commented out...I started with a template and just added a few lines as recommended by the Instructables. ## Configuration file for a typical Tor user## Last updated 22 September 2015 for Tor 0.2.7.3-alpha.## (may or may not work for much older or much newer versions of Tor.)#### Lines that begin with "## " try to explain what's going on. Lines## that begin with just "#" are disabled commands: you can enable them## by removing the "#" symbol.#### See 'man tor', or https://www.torproject.org/docs/tor-manual.html,## for more options you can use in this file.#### Tor will look for this file in various places based on your platform:## https://www.torproject.org/docs/faq#torrc SocksPort 0Log notice file /var/log/tor/notices.logRunAsDaemon 1ORPORT 9001DirPort 9030ExitPolicy reject *.*Nickname Lebowski1RelayBandwidthRate 200 KBRelayBandwidthBurst 400KB ## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't## configure one below. Set "SOCKSPort 0" if you plan to run Tor only## as a relay, and not make any local application connections yourself.#SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections.#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too. ## Entry policies to allow/deny SOCKS requests based on IP address.## First entry that matches wins. If no SOCKSPolicy is set, we accept## all (and only) requests that reach a SOCKSPort. Untrusted users who## can access your SOCKSPort may be able to learn about the connections## you make.#SOCKSPolicy accept 192.168.0.0/16#SOCKSPolicy accept6 FC00::/7#SOCKSPolicy reject * ## Logs go to stdout at level "notice" unless redirected by something## else, like one of the below lines. You can have as many Log lines as## you want.#### We advise using "notice" in most cases, since anything more verbose## may provide sensitive information to an attacker who obtains the logs.#### Send all messages of level 'notice' or higher to /var/log/tor/notices.log#Log notice file /var/log/tor/notices.log## Send every possible message to /var/log/tor/debug.log#Log debug file /var/log/tor/debug.log## Use the system log instead of Tor's logfiles#Log notice syslog## To send all messages to stderr:#Log debug stderr ## Uncomment this to start the process in the background... or use## --runasdaemon 1 on the command line. This is ignored on Windows;## see the FAQ entry if you want Tor to run as an NT service.#RunAsDaemon 1 ## The directory for keeping all the keys/etc. By default, we store## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.#DataDirectory /var/lib/tor ## The port on which Tor will listen for local connections from Tor## controller applications, as documented in control-spec.txt.#ControlPort 9051## If you enable the controlport, be sure to enable one of these## authentication methods, to prevent attackers from accessing it.#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C#CookieAuthentication 1 ############### This section is just for location-hidden services ### ## Once you have configured a hidden service, you can look at the## contents of the file ".../hidden_service/hostname" for the address#### HiddenServicePort x y:z says to redirect requests on port x to the## address y:z. #HiddenServiceDir /var/lib/tor/hidden_service/#HiddenServicePort 80 127.0.0.1:80 #HiddenServiceDir /var/lib/tor/other_hidden_service/#HiddenServicePort 80 127.0.0.1:80#HiddenServicePort 22 127.0.0.1:22 ################ This section is just for relays ######################## See https://www.torproject.org/docs/tor-doc-relay for details. ## Required: what port to advertise for incoming Tor connections.#ORPort 9001## If you want to listen on a port other than the one advertised in## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as## follows. You'll need to do ipchains or other port forwarding## yourself to make this work.#ORPort 443 NoListen#ORPort 127.0.0.1:9090 NoAdvertise## The IP address or full DNS name for incoming connections to your## relay. Leave commented out and Tor will guess.#Address noname.example.com ## If you have multiple network interfaces, you can specify one for## outgoing traffic to use.# OutboundBindAddress 10.0.0.5 ## A handle for your relay, so people don't have to refer to it by key.## Nicknames must be between 1 and 19 characters inclusive, and must## contain only the characters [a-zA-Z0-9].#Nickname ididnteditheconfig ## Define these to limit how much relayed traffic you will allow. Your## own traffic is still unthrottled. Note that RelayBandwidthRate must## be at least 75 kilobytes per second.## Note that units for these config options are bytes (per second), not## bits (per second), and that prefixes are binary prefixes, i.e. 2^10,## 2^20, etc.#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb) Plus a bunch of other stuff that is commented out. Appreciate any help. And by the way, i did go back and look through the archives over the last several months and didn't find a solution. Best regards, Judge

3 2

Re: [tor-relays] freebsd relay doesnt receive any traffic (after 1 month)
by dlugasny＠protonmail.com 25 Oct '18

25 Oct '18

Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Thursday, October 25, 2018 7:24 PM, <dlugasny(a)protonmail.com> wrote: > Dmitrii thanks for Your hints. > > Sent with ProtonMail Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Thursday, October 25, 2018 7:02 PM, Dmitrii Tcvetkov demfloro(a)demfloro.ru wrote: > > > On Thu, 25 Oct 2018 17:48:09 +0000 > > dlugasny(a)protonmail.com wrote: > > > > > In did, I have to read more carefully attached documentation. > > > After small changes torrc looks like this: > > > Does any one of You see any wrong parameters ? > > > ########################## > > > SocksPort 0 > > > Log notice file /var/log/tor/notices.log > > > ControlPort 9051 > > > HashedControlPassword (for nyx) > > > ORPort 9001 > > > RelayBandwidthRate 400 KBytes # Throttle traffic to 100KB/s (800Kbps) > > > RelayBandwidthBurst 600 KBytes # But allow bursts up to 200KB (1600Kb) > > > ContactInfo Dlugas-ny <dlugasny AT protonmail dot com> > > > DirPort 9030 # what port to advertise for directory connections > > > ExitRelay 0 > > > ExitPolicy reject : # no exits allowed > > > PublishServerDescriptor 0 > > > CellStatistics 1 > > > ExtraInfoStatistics 1 > > > ConnDirectionStatistics 1 > > > EntryStatistics 1 > > > LogMessageDomains 1 > > > AvoidDiskWrites 1 > > > WarnPlaintextPorts > > > HeartbeatPeriod 1hours > > > DisableDebuggerAttachment 0 > > > > These are enough to run a relay: > > SocksPort 0 > > ORPort 9001 > > RelayBandwidthRate 400 KBytes > > RelayBandwidthBurst 600 KBytes > > Log notice file /var/log/tor/notices.log > > ContactInfo Dlugas-ny <dlugasny AT protonmail dot com> > > DirPort 9030 > > MyFamily "fingerprints go here" > > ExitRelay 0 > > ExitPolicy reject : > > MyFamily should contain comma separated list of fingerprints of all your > > guard, middle, exit relays if you have any. Each fingerprint should be > > prefixed with '$' symbol. It shouldn't contain fingerprints of your > > bridges. > > If you want to use Nyx then you can enable: > > ControlPort 9051 > > HashedControlPassword > > Nyx I`m using, because I can observe traffic. "socket -4l" doesnt provide informations about connections. > > > Option > > DisableDebuggerAttachment 0 > > is for debugging and should be set to 1 during normal operation. Yes, > > it allows to snoop on Tor circuits in Nyx, but is that really needed? > > Its active because I would like to see if its really working. > > > BTW you can use bits in bandwidth settings, > > e.g. "RelayBandwidthRate 4 Mbits" > > Other options are optional and should be evaluated each separately. For > > example I don't know why you don't want to publish server descriptor, > > what is the point of unpublished middle relay? > > I just commented out "PublishServerDescriptor" > > > Why avoid disk writes? Modern hardware won't be worn out just by Tor > > relay disc activity. Why WarnPlaintextPorts? It's a relay, not a > > client, as SocksPort is 0. > > I just commented out AvoidDiskWriters and WarnPlaintextPorts. > > > In general it's better to start with software defaults and alter the > > settings only if you need them altered. > > I know. I have simply blindly copied example torrc from one of the "best practise FreeBsd tor tutorials". > > Thanks for Your hints. > > I hope that in the next days my first BSD relay will start relaying :).

1 0

35C3 Leipzig Voucher
by Paul 25 Oct '18

25 Oct '18

Any kind person out there, that is willing to share its Voucher for a ticket to 35C3 in Leipzig with me? Thanks and regards Paul

2 2

freebsd relay doesnt receive any traffic (after 1 month)
by dlugasny＠protonmail.com 25 Oct '18

25 Oct '18

Hi, few weeks ago ( more than 4) I have installed Freebsd with Tor relay service. System is connected to Tor network since more than one month but I see only 1-2 connections per day. I had Tor relay service on my Debian server for many years and I havent got any problems. With Freebsd its pain, nothing is working as expected. Any how I would like to build more BSD instances in few different countries, but first I need to know why its not working. Does any one could help me to do some troubleshooting ? Maybe some of the parameters in the torrc are blocking traffic ? My torrc without Hashedpassword, Nickname: ########################### SocksPort 0 Log notice file /var/log/tor/notices.log ControlPort 9051 ORPort 9001 RelayBandwidthRate 400 KBytes # Throttle traffic to 100KB/s (800Kbps) RelayBandwidthBurst 600 KBytes # But allow bursts up to 200KB (1600Kb) ContactInfo Dlugas-ny <dlugasny AT protonmail dot com> DirPort 9030 # what port to advertise for directory connections ExitPolicy reject *:* # no exits allowed PublishServerDescriptor 0 CellStatistics 1 ExtraInfoStatistics 1 ConnDirectionStatistics 1 EntryStatistics 1 LogMessageDomains 1 AvoidDiskWrites 1 WarnPlaintextPorts HeartbeatPeriod 1hours ServerTransportPlugin obfs2,obfs3 exec /usr/local/bin/obfsproxy managed ServerTransportPlugin obfs4 exec /usr/local/bin/obfsproxy managed ExtORPort auto ############################ Thanks in advance for any support Cheers Dlugasny Sent with [ProtonMail](https://protonmail.com) Secure Email.

2 1

Tor bridge on Windows 10 going down for a reason I cannot detect?
by Keifer Bly 25 Oct '18

25 Oct '18

Hello all, for some reason my tor bridge at https://metrics.torproject.org/rs.html#details/148BD64BED9F2C27637D986DE032… is randomly removed from the network. Tonight when I went to check it, tor metrics said it had said it was offline for the last 11 hours. This is very strange as I had not closed the tor software and my internet had not disconnected at all. Below is the tor log file, it is tor 0.3.4.8 on Windows 10, any thoughts would be great. Thanks. Oct 19 23:33:16.910 [notice] Tor 0.3.4.8 (git-da95b91355248ad8) running on Windows 8 with Libevent 2.1.8-stable, OpenSSL 1.0.2p, Zlib 1.2.11, Liblzma N/A, and Libzstd N/A. Oct 19 23:33:16.910 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning Oct 19 23:33:16.957 [notice] Read configuration file "C:\Users\keife\AppData\Roaming\tor\torrc.txt". Oct 19 23:33:16.972 [warn] Path for GeoIPFile (<default>) is relative and will resolve to C:\Users\keife\AppData\Roaming\tor\<default>. Is this what you wanted? Oct 19 23:33:16.972 [warn] Path for GeoIPv6File (<default>) is relative and will resolve to C:\Users\keife\AppData\Roaming\tor\<default>. Is this what you wanted? Oct 19 23:33:16.972 [notice] Based on detected system memory, MaxMemInQueues is set to 2048 MB. You can override this by setting MaxMemInQueues by hand. Oct 19 23:33:16.972 [notice] Scheduler type KISTLite has been enabled. Oct 19 23:33:16.972 [notice] Opening OR listener on 0.0.0.0:9002 Oct 19 23:33:16.972 [notice] Opening Extended OR listener on 127.0.0.1:0 Oct 19 23:33:16.972 [notice] Extended OR listener listening on port 56515. Oct 19 23:33:57.000 [notice] Parsing GEOIP IPv4 file C:\Users\keife\AppData\Roaming\tor\geoip. Oct 19 23:33:57.000 [notice] Parsing GEOIP IPv6 file C:\Users\keife\AppData\Roaming\tor\geoip6. Oct 19 23:33:57.000 [notice] Configured to measure statistics. Look for the *-stats files that will first be written to the data directory in 24 hours from now. Oct 19 23:33:58.000 [notice] Your Tor server's identity key fingerprint is 'torland 8C6C18F8D95918F9DC90A09827DAD285064F8872' Oct 19 23:33:58.000 [notice] Your Tor bridge's hashed identity key fingerprint is 'torland 148BD64BED9F2C27637D986DE032ECF14E5B9E9A' Oct 19 23:33:58.000 [notice] Bootstrapped 0%: Starting Oct 19 23:35:03.000 [notice] Starting with guard context "default" Oct 19 23:35:03.000 [notice] Bootstrapped 5%: Connecting to directory server Oct 19 23:35:05.000 [notice] Bootstrapped 10%: Finishing handshake with directory server Oct 19 23:35:05.000 [notice] Bootstrapped 15%: Establishing an encrypted directory connection Oct 19 23:35:05.000 [notice] Registered server transport 'obfs4' at '[::]:9002' Oct 19 23:35:05.000 [notice] Bootstrapped 20%: Asking for networkstatus consensus Oct 19 23:35:06.000 [notice] Bootstrapped 50%: Loading relay descriptors Oct 19 23:35:06.000 [notice] Guessed our IP address as 174.87.240.59 (source: 136.243.176.148). Oct 19 23:35:15.000 [notice] Bootstrapped 80%: Connecting to the Tor network Oct 19 23:35:15.000 [notice] Bootstrapped 90%: Establishing a Tor circuit Oct 19 23:35:18.000 [notice] Tor has successfully opened a circuit. Looks like client functionality is working. Oct 19 23:35:18.000 [notice] Bootstrapped 100%: Done Oct 19 23:35:18.000 [notice] Now checking whether ORPort 174.87.240.59:9002 is reachable... (this may take up to 20 minutes -- look for log messages indicating success) Oct 19 23:35:21.000 [notice] Self-testing indicates your ORPort is reachable from the outside. Excellent. Publishing server descriptor. Oct 19 23:36:44.000 [notice] Your network connection speed appears to have changed. Resetting timeout to 60s after 18 timeouts and 1000 buildtimes. Oct 19 23:36:45.000 [notice] Performing bandwidth self-test...done. Oct 20 05:35:00.000 [notice] Heartbeat: Tor's uptime is 5:59 hours, with 0 circuits open. I've sent 3.08 MB and received 14.49 MB. Oct 20 05:35:00.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 20 11:35:00.000 [notice] Heartbeat: Tor's uptime is 11:59 hours, with 1 circuits open. I've sent 4.38 MB and received 19.35 MB. Oct 20 11:35:00.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 20 17:35:00.000 [notice] Heartbeat: Tor's uptime is 17:59 hours, with 0 circuits open. I've sent 5.74 MB and received 23.84 MB. Oct 20 17:35:00.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 20 20:49:17.000 [notice] Channel padding timeout scheduled 180307ms in the past. Oct 20 23:35:00.000 [notice] Heartbeat: Tor's uptime is 23:59 hours, with 1 circuits open. I've sent 7.19 MB and received 28.20 MB. Oct 20 23:35:00.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 21 05:35:00.000 [notice] Heartbeat: Tor's uptime is 1 day 5:59 hours, with 0 circuits open. I've sent 8.77 MB and received 34.02 MB. Oct 21 05:35:00.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 21 11:35:00.000 [notice] Heartbeat: Tor's uptime is 1 day 11:59 hours, with 0 circuits open. I've sent 10.16 MB and received 38.10 MB. Oct 21 11:35:00.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 21 17:35:00.000 [notice] Heartbeat: Tor's uptime is 1 day 17:59 hours, with 1 circuits open. I've sent 11.54 MB and received 43.60 MB. Oct 23 00:47:29.000 [notice] Diagnostic for issue 8387: Found 1 one-hop circuits more than 1800 seconds old! Logging 1... Oct 23 00:47:29.000 [notice] #0 created at 2018-10-21 17:34:12. open, General-purpose client. Not marked for close. Package window: 1000. usable for new conns. Dirty since 2018-10-21 17:34:13 (112396 seconds vs 600-second cutoff). Oct 23 00:47:29.000 [notice] It has been 112368 seconds since I last called circuit_expire_old_circuits_clientside(). Oct 23 00:47:29.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 23 00:47:29.000 [warn] Your system clock just jumped 112349 seconds forward; assuming established circuits no longer work. Oct 23 00:47:31.000 [notice] Our directory information is no longer up-to-date enough to build circuits: We have no recent usable consensus. Oct 23 00:48:29.000 [notice] Heartbeat: Tor's uptime is 1 day 18:00 hours, with 1 circuits open. I've sent 11.54 MB and received 43.60 MB. Oct 23 00:48:29.000 [notice] Diagnostic for issue 8387: Found 1 one-hop circuits more than 1800 seconds old! Logging 1... Oct 23 00:48:29.000 [notice] #0 created at 2018-10-21 17:34:12. open, General-purpose client. Marked for close. Package window: 1000. Not usable for new conns. Dirty since 2018-10-21 17:24:13 (113056 seconds vs 600-second cutoff). Oct 23 00:48:29.000 [notice] It has been 59 seconds since I last called circuit_expire_old_circuits_clientside(). Oct 23 00:48:29.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients. Oct 23 00:48:32.000 [notice] I learned some more directory information, but not enough to build a circuit: We have no recent usable consensus. Oct 23 00:48:35.000 [notice] We now have enough directory information to build circuits. Oct 23 00:48:36.000 [notice] Tor has successfully opened a circuit. Looks like client functionality is working. Oct 23 00:48:36.000 [notice] Tor has successfully opened a circuit. Looks like client functionality is working. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

5 9