February 2013 - tor-commits - lists.torproject.org

[translation/vidalia_help] Update translations for vidalia_help
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit 5989bf37e533789bcb20d30719ff1a57228e1c6f Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 19:15:37 2013 +0000 Update translations for vidalia_help --- pl/services.po | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/pl/services.po b/pl/services.po index 9da5e1b..07a89ac 100644 --- a/pl/services.po +++ b/pl/services.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 17:00+0200\n" -"PO-Revision-Date: 2013-02-22 18:34+0000\n" +"PO-Revision-Date: 2013-02-22 18:49+0000\n" "Last-Translator: bogdrozd <bog.d(a)gazeta.pl>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -137,7 +137,7 @@ msgid "" "localhost:5222 (or on whatever port your server is listening). If you don't " "specify any target, Tor will redirect requests to the port specified in " "\"Virtual Port\" on localhost." -msgstr "" +msgstr "Cel (opcjonalny): Zazwyczaj ustawia się Tora na przekazywanie połączeń do localhosta na inny port, niż ten podany w polu \"Wirtualny Port\". Możesz więc podać cel składający się z fizycznego adresu i portu, do którego przekierowywane będą połączenia do Twojej Usługi Ukrytej, np. localhost:5222 (czy jakikolwiek port, na którym nasłuchuje Twój serwer). Jeśli nie podasz żadnego celu, Tor przekieruje połączenia na port podany w polu \"Wirtualny Port\" na locahoście." #. type: Content of: <html><body><p><ul><li> #: en/services.html:81

1 0

[translation/vidalia_help] Update translations for vidalia_help
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit cca464e54024141acfdeaa9d53da413f818ae621 Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 18:45:33 2013 +0000 Update translations for vidalia_help --- pl/services.po | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/pl/services.po b/pl/services.po index eb41406..9da5e1b 100644 --- a/pl/services.po +++ b/pl/services.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 17:00+0200\n" -"PO-Revision-Date: 2013-02-21 18:46+0000\n" +"PO-Revision-Date: 2013-02-22 18:34+0000\n" "Last-Translator: bogdrozd <bog.d(a)gazeta.pl>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -115,7 +115,7 @@ msgid "" "hidden service, the field says \"[Created by Tor]\"; in order to make it " "display the real onion address, you need to save your configuration and re-" "open the settings window." -msgstr "" +msgstr "Adres Onion (generowany): Adres usługi (lub cebulowy - onion) jest generowany przez Tora, by jednoznacznie identyfikować Twoją usługę. Daj ten adres ludziom, którzy będą mogli mieć dostęp do Twojej usługi. Możesz do tego użyć przycisku \"Kopiuj do schowka\", aby uniknąć literówek. Jeśli usługa właśnie została stworzona, w polu jest \"[Utworzone przez Tora]\"; aby wyświetlić prawdziwy adres onion, musisz zapisać konfigurację i ponownie otworzyć okno ustawień." #. type: Content of: <html><body><p><ul><li> #: en/services.html:68 @@ -125,7 +125,7 @@ msgid "" "service-specific port here, e.g. port 80 for HTTP. Note that the virtual " "port usually has nothing to do with firewall settings, because it is only " "used Tor-internally." -msgstr "" +msgstr "Wirtualny Port (wymagany): To jest port TCP, który muszą znać klienci, aby połączyć się z Twoją usługą. Zazwyczaj powinno się używać portu specyficznego dla usługi, np. port 80 dla HTTP. Port wirtualny zwykle nie ma nic wspólnego z ustawieniami firewalla, gdyż jest używany wewnętrzny dla Tora." #. type: Content of: <html><body><p><ul><li> #: en/services.html:73

1 0

[translation/liveusb-creator_completed] Update translations for liveusb-creator_completed
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit 3fffcd3811cd3936ef9d3cf5dd0c9ced5badc5da Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 16:46:03 2013 +0000 Update translations for liveusb-creator_completed --- lv/lv.po | 660 ++++++++++++++++++++++++++++++++++++++------------------------ 1 files changed, 403 insertions(+), 257 deletions(-) diff --git a/lv/lv.po b/lv/lv.po index 8325c97..89a4ec8 100644 --- a/lv/lv.po +++ b/lv/lv.po @@ -4,12 +4,13 @@ # # Translators: # Ojars Balcers <ojars.balcers(a)gmail.com>, 2012. +# Ojārs Balcers <ojars.balcers(a)gmail.com>, 2013. msgid "" msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" -"POT-Creation-Date: 2012-04-13 14:16+0200\n" -"PO-Revision-Date: 2012-12-03 19:36+0000\n" +"POT-Creation-Date: 2013-02-14 16:07+0100\n" +"PO-Revision-Date: 2013-02-22 16:21+0000\n" "Last-Translator: Ojars Balcers <ojars.balcers(a)gmail.com>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -18,388 +19,533 @@ msgstr "" "Language: lv\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n != 0 ? 1 : 2);\n" -#: ../liveusb/gui.py:80 +#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149 #, python-format -msgid "Unknown release: %s" -msgstr "Nezināms laidiens: %s" +msgid "%(distribution)s LiveUSB Creator" +msgstr "%(distribution)s LiveUSB Creator" -#: ../liveusb/gui.py:84 +#: ../liveusb/gui.py:758 #, python-format -msgid "Downloading %s..." -msgstr "Lejuplādē %s..." +msgid "%(filename)s selected" +msgstr "%(filename)s izvēlēts" + +#: ../liveusb/creator.py:1018 +#, python-format +msgid "%s already bootable" +msgstr "%s jau ir sāknējams" + +#: ../liveusb/launcher_ui.py:156 +msgid "" +"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n" +"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n" +"p, li { white-space: pre-wrap; }\n" +"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" +"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Nepieciešama palīdzība? Lasiet </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>" + +#: ../liveusb/launcher_ui.py:151 +msgid "" +"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n" +"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n" +"p, li { white-space: pre-wrap; }\n" +"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" +"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Kopēt uz USB zibatmiņas izpildāmu Tails. Dati mērķdzinī netiks saglabāti.</span></p></body></html>" + +#: ../liveusb/launcher_ui.py:153 +msgid "" +"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n" +"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n" +"p, li { white-space: pre-wrap; }\n" +"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" +"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Kopēt uz jau instalētas USB zibatmiņas izpildāmu Tails. Citas diska partīcijas tiks saglabāti.</span></p></body></html>" + +#: ../liveusb/launcher_ui.py:155 +msgid "" +"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n" +"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n" +"p, li { white-space: pre-wrap; }\n" +"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" +"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Ar jaunu ISO attēlu jaunināt jau instalētu Tails USB zibatmiņu.</span></p></body></html>" + +#: ../liveusb/dialog.py:154 +msgid "Alt+B" +msgstr "Alt+B" + +#: ../liveusb/dialog.py:153 +msgid "Browse" +msgstr "Pārlūkot" + +#: ../liveusb/dialog.py:160 +msgid "" +"By allocating extra space on your USB stick for a persistent overlay, you " +"will be able to store data and make permanent modifications to your live " +"operating system. Without it, you will not be able to save data that will " +"persist after a reboot." +msgstr "Piešķirot pastāvīgam pārklājumam papildu vietu savā USB zibatmiņā, Jums būs iespēja glabāt datus un paliekoši modificēt dzīvu sistēmu, kura darbojas. To nedarot, pēc pārlādes nebūs iespējams saglabāt datus." + +#: ../liveusb/creator.py:1120 ../liveusb/creator.py:1383 +#, python-format +msgid "Calculating the SHA1 of %s" +msgstr "Aprēķina %s SHA1" + +#: ../liveusb/creator.py:1331 +msgid "Cannot find" +msgstr "Nav iespējams atrast" + +#: ../liveusb/creator.py:574 +#, python-format +msgid "Cannot find device %s" +msgstr "Nav iespējams atrast ierīci %s" + +#: ../liveusb/launcher_ui.py:150 +msgid "" +"Clone\n" +"&&\n" +"Install" +msgstr "Klonēt\n&&\ninstalēt" + +#: ../liveusb/launcher_ui.py:152 +msgid "" +"Clone\n" +"&&\n" +"Upgrade" +msgstr "Klonēt\n&&\njaunināt" + +#: ../liveusb/dialog.py:165 +msgid "Create Live USB" +msgstr "Izveidot Dzīvu USB" + +#: ../liveusb/creator.py:429 +#, python-format +msgid "Creating %sMB persistent overlay" +msgstr "Rada %sMB lielu pastāvīgo pārklājumu" + +#: ../liveusb/gui.py:534 +msgid "" +"Device is not yet mounted, so we cannot determine the amount of free space." +" Setting a maximum limit of 8G for the persistent storage." +msgstr "Ierīce vēl nav uzmontēta, tāpēc nav iespējams noteikt brīvās vietas daudzumu. Iestata pastāvīgās krātuves maksimālo lielumu 8G." #: ../liveusb/gui.py:197 #, python-format msgid "Device is too small: it must be at least %s MiB." msgstr "Ierīce ir pārāk maza: tai jābūt vismaz %s MiB lielai." +#: ../liveusb/dialog.py:157 +#, python-format +msgid "Download %(distribution)s" +msgstr "Lejuplādēt %(distribution)s" + +#: ../liveusb/gui.py:732 +msgid "Download complete!" +msgstr "Lejupielāde pabeigta!" + +#: ../liveusb/gui.py:736 +msgid "Download failed: " +msgstr "Lejupielāde neizdevās: " + +#: ../liveusb/gui.py:84 +#, python-format +msgid "Downloading %s..." +msgstr "Lejuplādē %s..." + +#: ../liveusb/creator.py:1116 +msgid "Drive is a loopback, skipping MBR reset" +msgstr "Disks ir cilptestā, tiek izlaista MBR atiestatīšana" + +#: ../liveusb/creator.py:1196 +msgid "Error probing device" +msgstr "Kļūda pētot ierīci" + #: ../liveusb/gui.py:226 msgid "" "Error: Cannot set the label or obtain the UUID of your device. Unable to " "continue." msgstr "Kļūda: Nav iespējams iegūt ierīces UUID vai piešķirt iezīmi. Nespēj turpināt." +#: ../liveusb/creator.py:405 +msgid "" +"Error: The SHA1 of your Live CD is invalid. You can run this program with " +"the --noverify argument to bypass this verification check." +msgstr "Kļūda: Live CD SHA1 nav derīgs. Lai apietu šo verifikācijas pārbaudi, programmu var izpildīt ar argumentu --noverify ." + +#: ../liveusb/creator.py:144 +msgid "Extracting live image to USB device..." +msgstr "Tiešo attēlu izvērš USB ierīcē..." + +#: ../liveusb/creator.py:1061 +#, python-format +msgid "Formatting %(device)s as FAT32" +msgstr "Formatē %(device)s kā FAT32" + +#: ../liveusb/creator.py:139 +msgid "ISO MD5 checksum passed" +msgstr "ISO MD5 kontrolsumma bija sekmīga" + +#: ../liveusb/creator.py:137 +msgid "ISO MD5 checksum verification failed" +msgstr "ISO MD5 kontrolsummas verifikācija bija nesekmīga" + +#: ../liveusb/dialog.py:156 +msgid "" +"If you do not select an existing Live ISO, the selected release will be " +"downloaded for you." +msgstr "Ja neizvēlēsities esošu Dzīvu ISO, tiks lejuplādēts atlasītais izlaidums." + +#: ../liveusb/gui.py:601 +msgid "Installation complete!" +msgstr "Instalēšana ir pabeigta!" + #: ../liveusb/gui.py:276 #, python-format msgid "Installation complete! (%s)" msgstr "Instalēšana pabeigta! (%s)" +#: ../liveusb/gui.py:602 +msgid "Installation was completed. Press OK to close this program." +msgstr "Instalēšana ir pabeigta. Nospiediet Labi, lai aizvērtu programmu." + +#: ../liveusb/creator.py:913 ../liveusb/creator.py:1237 +msgid "Installing bootloader..." +msgstr "Instalē sāknēšanas lādētāju..." + #: ../liveusb/gui.py:281 msgid "LiveUSB creation failed!" msgstr "LiveUSB izveide neizdevās!" -#: ../liveusb/gui.py:388 +#: ../liveusb/creator.py:1332 msgid "" -"Warning: This tool needs to be run as an Administrator. To do this, right " -"click on the icon and open the Properties. Under the Compatibility tab, " -"check the \"Run this program as an administrator\" box." -msgstr "Brīdinājums: Šis rīks jālieto administratora režīmā. Lai to izdarītu, ar labo peles taustiņu noklikšķiniet uz ikonas un atveriet Rekvizītus. Verot cilni Savietojamība, atzīmējiet lodziņu \"Izpildīt programmu administratora režīmā\"." - -#: ../liveusb/gui.py:413 -msgid "Unable to find any USB drive" -msgstr "Nespēj atrast vismaz vienu USB disku" +"Make sure to extract the entire liveusb-creator zip file before running this" +" program." +msgstr "Pirms sākat šo programmu, pārliecinieties, ka tiek izvērsta visa tilpdatne jeb zipfails liveusb-creator." -#: ../liveusb/gui.py:521 +#: ../liveusb/creator.py:1208 msgid "" -"Device is not yet mounted, so we cannot determine the amount of free space." -" Setting a maximum limit of 8G for the persistent storage." -msgstr "Ierīce vēl nav uzmontēta, tāpēc nav iespējams noteikt brīvās vietas daudzumu. Iestata pastāvīgās krātuves maksimālo lielumu 8G." +"Make sure your USB key is plugged in and formatted with the FAT filesystem" +msgstr "Pārliecinieties, ka USB atslēga ir iesprausta un formatēta kā FAT datņu sistēma" + +#: ../liveusb/creator.py:847 +#, python-format +msgid "Mount %s exists after unmounting" +msgstr "Pēc nomontēšanas pastāv montējums %s" + +#: ../liveusb/gui.py:663 ../liveusb/gui.py:680 +msgid "Next" +msgstr "Nākamais" -#: ../liveusb/gui.py:528 +#: ../liveusb/gui.py:541 #, python-format msgid "No free space on device %(device)s" msgstr "Uz ierīces %(device)s nav brīvas vietas" -#: ../liveusb/gui.py:533 +#: ../liveusb/creator.py:824 +msgid "No mount points found" +msgstr "Montēšanas punkti netika atrasti" + +#: ../liveusb/creator.py:422 +msgid "Not enough free space on device." +msgstr "Uz ierīces nav pietiekami daudz brīvas vietas." + +#: ../liveusb/gui.py:546 msgid "Partition is FAT16; Restricting overlay size to 2G" msgstr "Nodalījums ir FAT16; Pārklājuma izmērs tiek ierobežots līdz 2G" -#: ../liveusb/gui.py:577 +#: ../liveusb/gui.py:592 msgid "Persistent Storage" msgstr "Pastāvīgā krātuve" -#: ../liveusb/gui.py:586 -msgid "Installation complete!" -msgstr "Instalēšana ir pabeigta!" - -#: ../liveusb/gui.py:587 -msgid "Installation was completed. Press OK to close this program." -msgstr "Instalēšana ir pabeigta. Nospiediet Labi, lai aizvērtu programmu." +#: ../liveusb/dialog.py:161 +msgid "Persistent Storage (0 MB)" +msgstr "Pastāvīga glabātuve (0 MB)" -#: ../liveusb/gui.py:610 -msgid "" -"The Master Boot Record on your device is blank. Pressing 'Create Live USB' " -"again will reset the MBR on this device." -msgstr "Ierīces pamatsāknēšanas ieraksts jeb MBR ir tukšs. Nospiežot 'Veidot Live USB' atkāroti, atiestatīs ierīces MBR." - -#: ../liveusb/gui.py:624 -msgid "" -"Warning: The Master Boot Record on your device does not match your system's " -"syslinux MBR. If you have trouble booting this stick, try running the " -"liveusb-creator with the --reset-mbr option." -msgstr "Brīdinājums: Ierīces pamatsāknēšanas ieraksts neatbilst sistēmas syslinux MBR. Ja rodas problēmas sāknējot ar šo karti, mēģiniet izpildīt liveusb-creator ar iespēju --reset-mbr ." - -#: ../liveusb/gui.py:638 -msgid "Unable to mount device" -msgstr "Nespēj uzmontēt ierīci" - -#: ../liveusb/gui.py:644 -msgid "Warning: All data on the selected drive will be lost." -msgstr "Brīdinājums: Visi, uz atlasītā diska esošie dati tiks pazaudēti." - -#: ../liveusb/gui.py:646 ../liveusb/gui.py:663 +#: ../liveusb/gui.py:661 ../liveusb/gui.py:678 msgid "Press 'Next' if you wish to continue." msgstr "Nospiediet 'Nākamais', ja vēlaties turpināt." -#: ../liveusb/gui.py:648 ../liveusb/gui.py:665 -msgid "Next" -msgstr "Nākamais" - -#: ../liveusb/gui.py:658 -msgid "" -"Your device already contains a LiveOS.\n" -"If you continue, this will be overwritten." -msgstr "Uz ierīces jau ir LiveOS.\nJa turpināsiet, tas tiks pārrakstīts." +#: ../liveusb/gui.py:452 +msgid "Refreshing releases..." +msgstr "Atsvaidzinoši izlaidumi..." -#: ../liveusb/gui.py:661 -msgid "" -"Warning: Creating a new persistent overlay will delete your existing one." -msgstr "Brīdinājums: Jauna pastāvīga pārklājuma izveide, dzēsīs esošo." +#: ../liveusb/gui.py:457 +msgid "Releases updated!" +msgstr "Laidieni atjaunināti!" -#: ../liveusb/gui.py:717 -msgid "Download complete!" -msgstr "Lejupielāde pabeigta!" +#: ../liveusb/creator.py:936 ../liveusb/creator.py:1255 +#, python-format +msgid "Removing %(file)s" +msgstr "Noņem %(file)s" -#: ../liveusb/gui.py:721 -msgid "Download failed: " -msgstr "Lejupielāde neizdevās: " +#: ../liveusb/creator.py:498 +msgid "Removing existing Live OS" +msgstr "Notiek esošās Live OS noņemšana" -#: ../liveusb/gui.py:722 -msgid "You can try again to resume your download" -msgstr "Variet vēlreiz mēģināt atjaunot lejupielādi" +#: ../liveusb/creator.py:1110 +#, python-format +msgid "Resetting Master Boot Record of %s" +msgstr "Atiestata %s pamatsāknēšanas ierakstu jeb MBR" -#: ../liveusb/gui.py:728 +#: ../liveusb/gui.py:743 msgid "Select Live ISO" msgstr "Izvēlēties Live ISO" -#: ../liveusb/gui.py:731 -msgid "" -"The selected file is unreadable.Please fix its permissions or select another" -" file." -msgstr "Atlasītā datne nav lasāma. Lūdzu sakārtojiet atļaujas vai izvēlieties citu datni." - -#: ../liveusb/gui.py:737 -msgid "" -"Unable to use the selected file. You may have better luck if you move your " -"ISO to the root of your drive (ie: C:\\)" -msgstr "Nespēj lietot atlasīto datni. Iespējams, veiktos labāk, ja ISO tiktu pārvietots uz diska sakni (proti, C:\\)" +#: ../liveusb/creator.py:181 +msgid "Setting up OLPC boot file..." +msgstr "Iestata OLPC sāknēšanas datni..." -#: ../liveusb/gui.py:743 +#: ../liveusb/creator.py:738 #, python-format -msgid "%(filename)s selected" -msgstr "%(filename)s izvēlēts" - -#: ../liveusb/creator.py:91 -msgid "You must run this application as root" -msgstr "Šī lietotne jāizpilda saknes režīmā" +msgid "" +"Some partitions of USB device %(device)s are mounted. They will be unmounted" +" before starting the installation process." +msgstr "Daži USB iekārtas %(device)s nodalījumi ir uzmontēti. Pirms instalēšanas procesa sākšanas tie tiks nomontēti." #: ../liveusb/creator.py:130 msgid "" "Source type does not support verification of ISO MD5 checksum, skipping" msgstr "Avota veids neatbalsta ISO kontrolsummas MD5 verifikāciju, šis solis tiek izlaists" -#: ../liveusb/creator.py:132 -msgid "Verifying ISO MD5 checksum" -msgstr "Verificē ISO MD5 kontrolsummu" - -#: ../liveusb/creator.py:137 -msgid "ISO MD5 checksum verification failed" -msgstr "ISO MD5 kontrolsummas verifikācija bija nesekmīga" +#: ../liveusb/creator.py:1144 +msgid "Synchronizing data on disk..." +msgstr "Sinhronizē datus uz diska..." -#: ../liveusb/creator.py:139 -msgid "ISO MD5 checksum passed" -msgstr "ISO MD5 kontrolsumma bija sekmīga" +#: ../liveusb/dialog.py:159 +msgid "Target Device" +msgstr "Mērķierīce" -#: ../liveusb/creator.py:144 -msgid "Extracting live image to USB device..." -msgstr "Tiešo attēlu izvērš USB ierīcē..." - -#: ../liveusb/creator.py:151 -#, python-format -msgid "Wrote to device at %(speed)d MB/sec" -msgstr "Ieraksts ierīcē tika veikts ar ātrumu %(speed)d MB/sec" +#: ../liveusb/gui.py:625 +msgid "" +"The Master Boot Record on your device is blank. Pressing 'Create Live USB' " +"again will reset the MBR on this device." +msgstr "Ierīces pamatsāknēšanas ieraksts jeb MBR ir tukšs. Nospiežot 'Veidot Live USB' atkāroti, atiestatīs ierīces MBR." -#: ../liveusb/creator.py:181 -msgid "Setting up OLPC boot file..." -msgstr "Iestata OLPC sāknēšanas datni..." +#: ../liveusb/gui.py:746 +msgid "" +"The selected file is unreadable. Please fix its permissions or select " +"another file." +msgstr "Atlasīto datni nav iespējams lasīt. Lūdzu sakārtojiet atļaujas vai izvēlieties citu datni. " -#: ../liveusb/creator.py:365 +#: ../liveusb/creator.py:366 #, python-format msgid "" "There was a problem executing the following command: `%(command)s`.\n" "A more detailed error log has been written to '%(filename)s'." msgstr "Radās problēmsituācija izpildot komandu: `%(command)s`.\nDetalizētāks kļūdas žurnāls tika ierakstīts '%(filename)s'." -#: ../liveusb/creator.py:384 -msgid "Verifying SHA1 checksum of LiveCD image..." -msgstr "Verificē LiveCD attēla kontrolsummu SHA1..." +#: ../liveusb/dialog.py:151 +msgid "" +"This button allows you to browse for an existing Live system ISO that you " +"have previously downloaded. If you do not select one, a release will be " +"downloaded for you automatically." +msgstr "Šī poga ļauj meklēt esošu, iepriekš lejuplādētu Dzīvu sistēmu ISO. Neatzīmējot nevienu, automātiski tiks lejuplādēts laidiens." -#: ../liveusb/creator.py:388 -msgid "Verifying SHA256 checksum of LiveCD image..." -msgstr "Verificē LiveCD attēla kontrolsummu SHA256..." +#: ../liveusb/dialog.py:164 +msgid "" +"This button will begin the LiveUSB creation process. This entails " +"optionally downloading a release (if an existing one wasn't selected), " +"extracting the ISO to the USB device, creating the persistent overlay, and " +"installing the bootloader." +msgstr "Šī poga aizsāk LiveUSB izveides procesu. Tas nozīmē laidiena lejuplādi (pēc izvēles, un, ja nav atlasīts esošs laidiens), ISO izvēršanu uz USB zibatmiņas ierīces, pastāvīga pārklājuma izveidošanu un sāknēšanas ielādētāja instalāciju." -#: ../liveusb/creator.py:404 +#: ../liveusb/dialog.py:158 msgid "" -"Error: The SHA1 of your Live CD is invalid. You can run this program with " -"the --noverify argument to bypass this verification check." -msgstr "Kļūda: Live CD SHA1 nav derīgs. Lai apietu šo verifikācijas pārbaudi, programmu var izpildīt ar argumentu --noverify ." +"This is the USB stick that you want to install your Live system on. This " +"device must be formatted with the FAT filesystem." +msgstr "Uz šīs USB zibatmiņas vēlaties instalēt savu Dzīvo sistēmu. Šī ierīce jāformatē ar datņu sistēmu FAT." -#: ../liveusb/creator.py:410 -msgid "Unknown ISO, skipping checksum verification" -msgstr "Nezināms ISO, tiek izlaista kontrolsummas verifikācija" +#: ../liveusb/dialog.py:163 +msgid "" +"This is the progress bar that will indicate how far along in the LiveUSB " +"creation process you are" +msgstr "Norises josla rāda cik tālu aizritējis LiveUSB izveidošanas process" -#: ../liveusb/creator.py:421 -msgid "Not enough free space on device." -msgstr "Uz ierīces nav pietiekami daudz brīvas vietas." +#: ../liveusb/dialog.py:162 +msgid "This is the status console, where all messages get written to." +msgstr "Šis ir statusa žurnāls, kurā tiek ierakstīti visi ziņojumi." -#: ../liveusb/creator.py:428 +#: ../liveusb/creator.py:908 #, python-format -msgid "Creating %sMB persistent overlay" -msgstr "Rada %sMB lielu pastāvīgo pārklājumu" +msgid "Unable to change volume label: %(message)s" +msgstr "Nespēj mainīt sējuma iezīmi: %(message)s" -#: ../liveusb/creator.py:487 +#: ../liveusb/creator.py:507 ../liveusb/creator.py:518 +#, python-format +msgid "Unable to chmod %(file)s: %(message)s" +msgstr "Nespēj chmod %(file)s: %(message)s" + +#: ../liveusb/creator.py:488 #, python-format msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s" msgstr "Nespēj kopēt %(infile)s uz %(outfile)s: %(message)s" -#: ../liveusb/creator.py:497 -msgid "Removing existing Live OS" -msgstr "Notiek esošās Live OS noņemšana" +#: ../liveusb/gui.py:414 +msgid "Unable to find any USB drive" +msgstr "Nespēj atrast vismaz vienu USB disku" -#: ../liveusb/creator.py:506 ../liveusb/creator.py:517 -#, python-format -msgid "Unable to chmod %(file)s: %(message)s" -msgstr "Nespēj chmod %(file)s: %(message)s" +#: ../liveusb/creator.py:1198 +msgid "Unable to find any removable device" +msgstr "Nespēj atrast jebkādu noņemamu ierīci" + +#: ../liveusb/creator.py:1038 +msgid "Unable to find partition" +msgstr "Nespēj atrast nodalījumu" + +#: ../liveusb/creator.py:1278 +msgid "" +"Unable to get Win32_LogicalDisk; win32com query did not return any results" +msgstr "Nespēj sasniegt Win32_LogicalDisk; win32com vaicājums nesniedza atbildes" -#: ../liveusb/creator.py:510 +#: ../liveusb/gui.py:653 +msgid "Unable to mount device" +msgstr "Nespēj uzmontēt ierīci" + +#: ../liveusb/creator.py:812 #, python-format -msgid "Unable to remove file from previous LiveOS: %(message)s" -msgstr "Nespēj noņemt datni no iepriekšējās LiveOS: %(message)s" +msgid "Unable to mount device: %(message)s" +msgstr "Nespēj montēt iekārtu: %(message)s" -#: ../liveusb/creator.py:522 +#: ../liveusb/creator.py:523 #, python-format msgid "Unable to remove directory from previous LiveOS: %(message)s" msgstr "Nespēj noņemt direktoriju no iepriekšējās LiveOS: %(message)s" -#: ../liveusb/creator.py:573 +#: ../liveusb/creator.py:511 #, python-format -msgid "Cannot find device %s" -msgstr "Nav iespējams atrast ierīci %s" +msgid "Unable to remove file from previous LiveOS: %(message)s" +msgstr "Nespēj noņemt datni no iepriekšējās LiveOS: %(message)s" -#: ../liveusb/creator.py:635 +#: ../liveusb/creator.py:1113 msgid "" -"You are using an old version of syslinux-extlinux that does not support the " -"ext4 filesystem" -msgstr "Tiek lietota veca syslinux-extlinux versija, kura neatbalsta datņu sistēmu ext4 " - -#: ../liveusb/creator.py:718 -#, python-format -msgid "Unable to write on %(device)s, skipping." -msgstr "Nespēj rakstīt %(device)s, šis solis tiek izlaists." +"Unable to reset MBR. You may not have the `syslinux` package installed." +msgstr "Nespēj atiestatīt MBR. Iespējams, ka nav instalēta pakotne `syslinux`." -#: ../liveusb/creator.py:737 -#, python-format +#: ../liveusb/gui.py:752 msgid "" -"Some partitions of USB device %(device)s are mounted. They will be unmounted" -" before starting the installation process." -msgstr "Daži USB iekārtas %(device)s nodalījumi ir uzmontēti. Pirms instalēšanas procesa sākšanas tie tiks nomontēti." - -#: ../liveusb/creator.py:786 ../liveusb/creator.py:886 -msgid "Unknown filesystem. Your device may need to be reformatted." -msgstr "Nezināma datņu sistēma. Iespējams, ierīci nepieciešams pārformatēt." +"Unable to use the selected file. You may have better luck if you move your " +"ISO to the root of your drive (ie: C:\\)" +msgstr "Nespēj lietot atlasīto datni. Iespējams, veiktos labāk, ja ISO tiktu pārvietots uz diska sakni (proti, C:\\)" -#: ../liveusb/creator.py:789 +#: ../liveusb/creator.py:719 #, python-format -msgid "" -"Unsupported filesystem: %s\n" -"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone Tails\" action instead." -msgstr "Neatbalstīta datņu sistēma: %s\nGadījumā, ja cenšaties jaunināt manuāli instalētu sistēmu Tails (proti, tā tika instalēta bez šīs instalēšanas programmas), šī iespēja netiek atbalstīta: nepieciešams instalēt no jauna, piem., šoreiz izvēloties darbību \"Klonēt Tails\"." +msgid "Unable to write on %(device)s, skipping." +msgstr "Nespēj rakstīt %(device)s, šis solis tiek izlaists." -#: ../liveusb/creator.py:791 ../liveusb/creator.py:889 -#, python-format -msgid "Unsupported filesystem: %s" -msgstr "Datņu sistēma, kura netiek atbalstīta: %s" +#: ../liveusb/creator.py:411 +msgid "Unknown ISO, skipping checksum verification" +msgstr "Nezināms ISO, tiek izlaista kontrolsummas verifikācija" -#: ../liveusb/creator.py:807 +#: ../liveusb/creator.py:808 #, python-format msgid "Unknown dbus exception while trying to mount device: %(message)s" msgstr "Nezināms dbus izņēmums cenšoties montēt iekārtu: %(message)s" -#: ../liveusb/creator.py:811 -#, python-format -msgid "Unable to mount device: %(message)s" -msgstr "Nespēj montēt iekārtu: %(message)s" +#: ../liveusb/creator.py:787 ../liveusb/creator.py:887 +msgid "Unknown filesystem. Your device may need to be reformatted." +msgstr "Nezināma datņu sistēma. Iespējams, ierīci nepieciešams pārformatēt." -#: ../liveusb/creator.py:823 -msgid "No mount points found" -msgstr "Montēšanas punkti netika atrasti" +#: ../liveusb/gui.py:80 +#, python-format +msgid "Unknown release: %s" +msgstr "Nezināms laidiens: %s" -#: ../liveusb/creator.py:834 +#: ../liveusb/creator.py:835 #, python-format msgid "Unmounting %(device)s" msgstr "Nomontē %(device)s" -#: ../liveusb/creator.py:846 +#: ../liveusb/creator.py:792 ../liveusb/creator.py:890 #, python-format -msgid "Mount %s exists after unmounting" -msgstr "Pēc nomontēšanas pastāv montējums %s" - -#: ../liveusb/creator.py:883 ../liveusb/creator.py:1203 -msgid "Verifying filesystem..." -msgstr "Verificē datņu sistēmu..." +msgid "Unsupported filesystem: %s" +msgstr "Datņu sistēma, kura netiek atbalstīta: %s" -#: ../liveusb/creator.py:907 +#: ../liveusb/creator.py:790 #, python-format -msgid "Unable to change volume label: %(message)s" -msgstr "Nespēj mainīt sējuma iezīmi: %(message)s" - -#: ../liveusb/creator.py:912 ../liveusb/creator.py:1236 -msgid "Installing bootloader..." -msgstr "Instalē sāknēšanas lādētāju..." +msgid "" +"Unsupported filesystem: %s\n" +"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead." +msgstr "Neatbalstīta datņusistēma: %s\nGadījumā, ja cenšaties jaunināt manuāli instalētu Tails sistēmu (proti, tādu, kuru nav instalējis šis instalētājs), šī izvēles iespēja netiek atbalstīta: Jums vispirms jāinstalē no jauna, piem., izvēloties darbību \"Klonēt & instalēt\"." -#: ../liveusb/creator.py:935 ../liveusb/creator.py:1254 +#: ../liveusb/creator.py:1211 #, python-format -msgid "Removing %(file)s" -msgstr "Noņem %(file)s" +msgid "" +"Unsupported filesystem: %s\n" +"Please backup and format your USB key with the FAT filesystem." +msgstr "Neatbalstīta datņu sistēma: %s\nLūdzu veiciet datu rezerves kopēšanu un formatējiet savu USB atslēgu kā FAT datņu sistēmu." -#: ../liveusb/creator.py:1017 -#, python-format -msgid "%s already bootable" -msgstr "%s jau ir sāknējams" +#: ../liveusb/launcher_ui.py:154 +msgid "Upgrade from ISO" +msgstr "Jaunināt no ISO" -#: ../liveusb/creator.py:1037 -msgid "Unable to find partition" -msgstr "Nespēj atrast nodalījumu" +#: ../liveusb/dialog.py:152 +msgid "Use existing Live system ISO" +msgstr "Lietot esošo Dzīvas sistēmas ISO" -#: ../liveusb/creator.py:1060 -#, python-format -msgid "Formatting %(device)s as FAT32" -msgstr "Formatē %(device)s kā FAT32" - -#: ../liveusb/creator.py:1109 -#, python-format -msgid "Resetting Master Boot Record of %s" -msgstr "Atiestata %s pamatsāknēšanas ierakstu jeb MBR" +#: ../liveusb/creator.py:132 +msgid "Verifying ISO MD5 checksum" +msgstr "Verificē ISO MD5 kontrolsummu" -#: ../liveusb/creator.py:1112 -msgid "" -"Unable to reset MBR. You may not have the `syslinux` package installed." -msgstr "Nespēj atiestatīt MBR. Iespējams, ka nav instalēta pakotne `syslinux`." +#: ../liveusb/creator.py:385 +msgid "Verifying SHA1 checksum of LiveCD image..." +msgstr "Verificē LiveCD attēla kontrolsummu SHA1..." -#: ../liveusb/creator.py:1115 -msgid "Drive is a loopback, skipping MBR reset" -msgstr "Disks ir cilptestā, tiek izlaista MBR atiestatīšana" +#: ../liveusb/creator.py:389 +msgid "Verifying SHA256 checksum of LiveCD image..." +msgstr "Verificē LiveCD attēla kontrolsummu SHA256..." -#: ../liveusb/creator.py:1119 ../liveusb/creator.py:1382 -#, python-format -msgid "Calculating the SHA1 of %s" -msgstr "Aprēķina %s SHA1" +#: ../liveusb/creator.py:884 ../liveusb/creator.py:1204 +msgid "Verifying filesystem..." +msgstr "Verificē datņu sistēmu..." -#: ../liveusb/creator.py:1143 -msgid "Synchronizing data on disk..." -msgstr "Sinhronizē datus uz diska..." +#: ../liveusb/gui.py:659 +msgid "Warning: All data on the selected drive will be lost." +msgstr "Brīdinājums: Visi, uz atlasītā diska esošie dati tiks pazaudēti." -#: ../liveusb/creator.py:1195 -msgid "Error probing device" -msgstr "Kļūda pētot ierīci" +#: ../liveusb/gui.py:676 +msgid "" +"Warning: Creating a new persistent overlay will delete your existing one." +msgstr "Brīdinājums: Jauna pastāvīga pārklājuma izveide, dzēsīs esošo." -#: ../liveusb/creator.py:1197 -msgid "Unable to find any removable device" -msgstr "Nespēj atrast jebkādu noņemamu ierīci" +#: ../liveusb/gui.py:639 +msgid "" +"Warning: The Master Boot Record on your device does not match your system's " +"syslinux MBR. If you have trouble booting this stick, try running the " +"liveusb-creator with the --reset-mbr option." +msgstr "Brīdinājums: Ierīces pamatsāknēšanas ieraksts neatbilst sistēmas syslinux MBR. Ja rodas problēmas sāknējot ar šo karti, mēģiniet izpildīt liveusb-creator ar iespēju --reset-mbr ." -#: ../liveusb/creator.py:1207 +#: ../liveusb/gui.py:389 msgid "" -"Make sure your USB key is plugged in and formatted with the FAT filesystem" -msgstr "Pārliecinieties, ka USB atslēga ir iesprausta un formatēta kā FAT datņu sistēma" +"Warning: This tool needs to be run as an Administrator. To do this, right " +"click on the icon and open the Properties. Under the Compatibility tab, " +"check the \"Run this program as an administrator\" box." +msgstr "Brīdinājums: Šis rīks jālieto administratora režīmā. Lai to izdarītu, ar labo peles taustiņu noklikšķiniet uz ikonas un atveriet Rekvizītus. Verot cilni Savietojamība, atzīmējiet lodziņu \"Izpildīt programmu administratora režīmā\"." -#: ../liveusb/creator.py:1210 +#: ../liveusb/creator.py:151 #, python-format -msgid "" -"Unsupported filesystem: %s\n" -"Please backup and format your USB key with the FAT filesystem." -msgstr "Neatbalstīta datņu sistēma: %s\nLūdzu veiciet datu rezerves kopēšanu un formatējiet savu USB atslēgu kā FAT datņu sistēmu." +msgid "Wrote to device at %(speed)d MB/sec" +msgstr "Ieraksts ierīcē tika veikts ar ātrumu %(speed)d MB/sec" -#: ../liveusb/creator.py:1277 +#: ../liveusb/creator.py:636 msgid "" -"Unable to get Win32_LogicalDisk; win32com query did not return any results" -msgstr "Nespēj sasniegt Win32_LogicalDisk; win32com vaicājums nesniedza atbildes" +"You are using an old version of syslinux-extlinux that does not support the " +"ext4 filesystem" +msgstr "Tiek lietota veca syslinux-extlinux versija, kura neatbalsta datņu sistēmu ext4 " -#: ../liveusb/creator.py:1330 -msgid "Cannot find" -msgstr "Nav iespējams atrast" +#: ../liveusb/gui.py:737 +msgid "You can try again to resume your download" +msgstr "Variet vēlreiz mēģināt atjaunot lejupielādi" -#: ../liveusb/creator.py:1331 +#: ../liveusb/creator.py:91 +msgid "You must run this application as root" +msgstr "Šī lietotne jāizpilda saknes režīmā" + +#: ../liveusb/gui.py:673 msgid "" -"Make sure to extract the entire liveusb-creator zip file before running this" -" program." -msgstr "Pirms sākat šo programmu, pārliecinieties, ka tiek izvērsta visa tilpdatne jeb zipfails liveusb-creator." +"Your device already contains a LiveOS.\n" +"If you continue, this will be overwritten." +msgstr "Uz ierīces jau ir LiveOS.\nJa turpināsiet, tas tiks pārrakstīts." + +#: ../liveusb/dialog.py:155 +msgid "or" +msgstr "vai"

1 0

[translation/liveusb-creator] Update translations for liveusb-creator
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit 08446463538eb618abd36d108bcdeb26f0b5d02c Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 16:46:00 2013 +0000 Update translations for liveusb-creator --- lv/lv.po | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/lv/lv.po b/lv/lv.po index 3d9b693..89a4ec8 100644 --- a/lv/lv.po +++ b/lv/lv.po @@ -10,7 +10,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2013-02-14 16:07+0100\n" -"PO-Revision-Date: 2013-02-22 16:14+0000\n" +"PO-Revision-Date: 2013-02-22 16:21+0000\n" "Last-Translator: Ojars Balcers <ojars.balcers(a)gmail.com>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -84,7 +84,7 @@ msgid "" "will be able to store data and make permanent modifications to your live " "operating system. Without it, you will not be able to save data that will " "persist after a reboot." -msgstr "Piešķirot pastāvīgam pārklājumam papildu vietu savā USB zibatmiņā, Jums būs iespēja glabāt datus un paliekoši modificēt dzīvu sistēmu, kura darbojas. To nedarot, nebūs iespējams saglabāt datus pēc pārlādes." +msgstr "Piešķirot pastāvīgam pārklājumam papildu vietu savā USB zibatmiņā, Jums būs iespēja glabāt datus un paliekoši modificēt dzīvu sistēmu, kura darbojas. To nedarot, pēc pārlādes nebūs iespējams saglabāt datus." #: ../liveusb/creator.py:1120 ../liveusb/creator.py:1383 #, python-format @@ -271,7 +271,7 @@ msgstr "Atsvaidzinoši izlaidumi..." #: ../liveusb/gui.py:457 msgid "Releases updated!" -msgstr "Izlaidumi atjaunināti!" +msgstr "Laidieni atjaunināti!" #: ../liveusb/creator.py:936 ../liveusb/creator.py:1255 #, python-format @@ -347,7 +347,7 @@ msgid "" "optionally downloading a release (if an existing one wasn't selected), " "extracting the ISO to the USB device, creating the persistent overlay, and " "installing the bootloader." -msgstr "" +msgstr "Šī poga aizsāk LiveUSB izveides procesu. Tas nozīmē laidiena lejuplādi (pēc izvēles, un, ja nav atlasīts esošs laidiens), ISO izvēršanu uz USB zibatmiņas ierīces, pastāvīga pārklājuma izveidošanu un sāknēšanas ielādētāja instalāciju." #: ../liveusb/dialog.py:158 msgid ""

1 0

[translation/liveusb-creator] Update translations for liveusb-creator
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit e4667cb9af5a5b132932ab66a7804a53df5321cb Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 16:16:11 2013 +0000 Update translations for liveusb-creator --- lv/lv.po | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-) diff --git a/lv/lv.po b/lv/lv.po index a422f83..3d9b693 100644 --- a/lv/lv.po +++ b/lv/lv.po @@ -10,7 +10,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2013-02-14 16:07+0100\n" -"PO-Revision-Date: 2013-02-22 15:41+0000\n" +"PO-Revision-Date: 2013-02-22 16:14+0000\n" "Last-Translator: Ojars Balcers <ojars.balcers(a)gmail.com>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -84,7 +84,7 @@ msgid "" "will be able to store data and make permanent modifications to your live " "operating system. Without it, you will not be able to save data that will " "persist after a reboot." -msgstr "" +msgstr "Piešķirot pastāvīgam pārklājumam papildu vietu savā USB zibatmiņā, Jums būs iespēja glabāt datus un paliekoši modificēt dzīvu sistēmu, kura darbojas. To nedarot, nebūs iespējams saglabāt datus pēc pārlādes." #: ../liveusb/creator.py:1120 ../liveusb/creator.py:1383 #, python-format @@ -271,7 +271,7 @@ msgstr "Atsvaidzinoši izlaidumi..." #: ../liveusb/gui.py:457 msgid "Releases updated!" -msgstr "" +msgstr "Izlaidumi atjaunināti!" #: ../liveusb/creator.py:936 ../liveusb/creator.py:1255 #, python-format @@ -325,7 +325,7 @@ msgstr "Ierīces pamatsāknēšanas ieraksts jeb MBR ir tukšs. Nospiežot 'Veid msgid "" "The selected file is unreadable. Please fix its permissions or select " "another file." -msgstr "" +msgstr "Atlasīto datni nav iespējams lasīt. Lūdzu sakārtojiet atļaujas vai izvēlieties citu datni. " #: ../liveusb/creator.py:366 #, python-format @@ -339,7 +339,7 @@ msgid "" "This button allows you to browse for an existing Live system ISO that you " "have previously downloaded. If you do not select one, a release will be " "downloaded for you automatically." -msgstr "" +msgstr "Šī poga ļauj meklēt esošu, iepriekš lejuplādētu Dzīvu sistēmu ISO. Neatzīmējot nevienu, automātiski tiks lejuplādēts laidiens." #: ../liveusb/dialog.py:164 msgid "" @@ -353,17 +353,17 @@ msgstr "" msgid "" "This is the USB stick that you want to install your Live system on. This " "device must be formatted with the FAT filesystem." -msgstr "" +msgstr "Uz šīs USB zibatmiņas vēlaties instalēt savu Dzīvo sistēmu. Šī ierīce jāformatē ar datņu sistēmu FAT." #: ../liveusb/dialog.py:163 msgid "" "This is the progress bar that will indicate how far along in the LiveUSB " "creation process you are" -msgstr "" +msgstr "Norises josla rāda cik tālu aizritējis LiveUSB izveidošanas process" #: ../liveusb/dialog.py:162 msgid "This is the status console, where all messages get written to." -msgstr "" +msgstr "Šis ir statusa žurnāls, kurā tiek ierakstīti visi ziņojumi." #: ../liveusb/creator.py:908 #, python-format @@ -465,7 +465,7 @@ msgstr "Datņu sistēma, kura netiek atbalstīta: %s" msgid "" "Unsupported filesystem: %s\n" "In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead." -msgstr "" +msgstr "Neatbalstīta datņusistēma: %s\nGadījumā, ja cenšaties jaunināt manuāli instalētu Tails sistēmu (proti, tādu, kuru nav instalējis šis instalētājs), šī izvēles iespēja netiek atbalstīta: Jums vispirms jāinstalē no jauna, piem., izvēloties darbību \"Klonēt & instalēt\"." #: ../liveusb/creator.py:1211 #, python-format

1 0

[translation/torbirdy_completed] Update translations for torbirdy_completed
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit 5b57fa4312e76eab0b8a27dcd5d9a90339b3490a Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 15:46:22 2013 +0000 Update translations for torbirdy_completed --- lv/torbirdy.properties | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/lv/torbirdy.properties b/lv/torbirdy.properties index ab91c4f..2ec6345 100644 --- a/lv/torbirdy.properties +++ b/lv/torbirdy.properties @@ -14,3 +14,6 @@ torbirdy.email.advanced.nextwarning=Nākamreiz rādīt šo brīdinājumu torbirdy.email.advanced.title=TorBirdy Lietpratīgie iestatījumi torbirdy.restart=Lūdzu aizveriet Thunderbird'u un startējiet to vēlreiz, lai laika zonu preferences stātos spēkā. + +torbirdy.firstrun=Tagad Jūs izpildāt TorBirdy.\n\nLai palīdzētu aizsargāt Jūsu anonimitāti, TorBirdy ieviesīs noteiktos Thunderbird iestatījumus, novēršot to maiņu no Jūsu vai pievienojumu puses. Ir atsevišķi maināmi iestatījumi. Pie tiem var piekļūt no TorBirdy preferenču dialogekrāna. Kad TorBirdy ir atinstalēts vai atspējots, tad visi tā maināmie iestatījumi tiek atiestatīti uz savām noklusējumvērtībām (vērtībām pirms TorBirdy instalācijas).\n\nJa esat jauns, tad iesakām iepazīties ar TorBirdy tīmekļa vietnē ievietotajiem materiāliem, lai saprastu, kādus risinājumus mēs tiecamies sniegt mūsu lietotājiem ar TorBirdy. +torbirdy.website=https://trac.torproject.org/projects/tor/wiki/torbirdy

1 0

[translation/torbirdy] Update translations for torbirdy
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit 988b8ea5f356e8924de91105992d98c27f824be3 Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 15:46:20 2013 +0000 Update translations for torbirdy --- lv/torbirdy.properties | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/lv/torbirdy.properties b/lv/torbirdy.properties index da3139c..2ec6345 100644 --- a/lv/torbirdy.properties +++ b/lv/torbirdy.properties @@ -15,5 +15,5 @@ torbirdy.email.advanced.title=TorBirdy Lietpratīgie iestatījumi torbirdy.restart=Lūdzu aizveriet Thunderbird'u un startējiet to vēlreiz, lai laika zonu preferences stātos spēkā. -# torbirdy.firstrun=You are now running TorBirdy.\n\nTo help protect your anonymity, TorBirdy will enforce the Thunderbird settings it has set, preventing them from being changed by you or by any add-on. There are some settings that can be changed and those are accessed through TorBirdy's preferences dialog. When TorBirdy is uninstalled or disabled, all settings that it changes are reset to their default values (the values prior to TorBirdy's install).\n\nIf you are a new user, it is recommended that you read through the TorBirdy website to understand what we are trying to accomplish with TorBirdy for our users. +torbirdy.firstrun=Tagad Jūs izpildāt TorBirdy.\n\nLai palīdzētu aizsargāt Jūsu anonimitāti, TorBirdy ieviesīs noteiktos Thunderbird iestatījumus, novēršot to maiņu no Jūsu vai pievienojumu puses. Ir atsevišķi maināmi iestatījumi. Pie tiem var piekļūt no TorBirdy preferenču dialogekrāna. Kad TorBirdy ir atinstalēts vai atspējots, tad visi tā maināmie iestatījumi tiek atiestatīti uz savām noklusējumvērtībām (vērtībām pirms TorBirdy instalācijas).\n\nJa esat jauns, tad iesakām iepazīties ar TorBirdy tīmekļa vietnē ievietotajiem materiāliem, lai saprastu, kādus risinājumus mēs tiecamies sniegt mūsu lietotājiem ar TorBirdy. torbirdy.website=https://trac.torproject.org/projects/tor/wiki/torbirdy

1 0

[translation/tails-greeter_completed] Update translations for tails-greeter_completed
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit cd8ecc19b2eb6eb4ec0d497096b81b2e96acd44b Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 15:46:17 2013 +0000 Update translations for tails-greeter_completed --- fa/fa.po | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/fa/fa.po b/fa/fa.po index 4b284e2..1533192 100644 --- a/fa/fa.po +++ b/fa/fa.po @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2012-06-01 15:10+0200\n" -"PO-Revision-Date: 2013-02-21 17:51+0000\n" +"PO-Revision-Date: 2013-02-22 15:34+0000\n" "Last-Translator: zendegi <hamahangi(a)posteo.eu>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -58,13 +58,13 @@ msgstr "گزینه‌های بیشتری؟" #: ../glade/optionswindow.glade.h:3 msgid "Administration password" -msgstr "رمز عبور اداره" +msgstr "رمز عبور مديريت" #: ../glade/optionswindow.glade.h:4 msgid "" "Enter an administration password in case you need to perform administration tasks.\n" "Otherwise it will be disabled for better security." -msgstr "بفرماييد رمز عبور اداره واردكنيد، در صورتى كه نياز داريد كارهاى اداره انجام بدهيد. ⏎ وگرنه براى امنيت بيشتر غيرفعال مى‌شود." +msgstr "لطفاً رمز عبور مديريتى واردكنيد، در صورتى كه لازم‌است كارهاى مديريت انجام بدهيد.\\n\nوگرنه، اين گزينه براى امنيت بيشتر غيرفعال مى‌شود." #: ../glade/optionswindow.glade.h:6 msgid "Password:" @@ -72,7 +72,7 @@ msgstr "رمز عبور" #: ../glade/optionswindow.glade.h:7 msgid "Verify Password:" -msgstr "بازبينى‌كردن رمز عبور" +msgstr "تاييد رمز عبور" #: ../glade/optionswindow.glade.h:9 msgid "Windows Camouflage" @@ -82,7 +82,7 @@ msgstr "پوشش ویندوز" msgid "" "This option makes Tails look more like Microsoft Windows XP. This may be " "useful in public places in order to avoid attracting suspicion." -msgstr "این گزینه کار می‌کند که تیلزرا شابه مایکروسافت ویندوز اکس پی بیشتر به نظر برسد. این گزینه شاید در محلات عامه به دردتان بخورد." +msgstr "این گزینه کار می‌کند که تیلزرا بيشتر شابه مایکروسافت ویندوز اکس پی به نظر برسد. این گزینه شاید در محلات عامه به دردتان بخورد براى اين كه از ظن ديگران طفره‌رويد." #: ../glade/optionswindow.glade.h:11 msgid "Activate Microsoft Windows XP Camouflage" @@ -98,7 +98,7 @@ msgstr "محل" #: ../glade/langpanel.glade.h:4 msgid "Layout" -msgstr "طرح" +msgstr "صفحه‌بندى" #: ../GdmGreeter/optionswindow.py:68 msgid "<i>Passwords do not match</i>" @@ -109,7 +109,7 @@ msgstr "<i>رمزهاى عبور با هم مطابقت ندارند</i>" msgid "" "live-persist failed with return code %(returncode)s:\n" "%(stderr)s" -msgstr "«live-persist» ناموفق با كد %(returncode)s:⏎ %(stderr)s" +msgstr "live-persist ناموفق با كد %(returncode)s:\\n\n%(stderr)s" #: ../GdmGreeter/persistence.py:99 #, python-format @@ -117,7 +117,7 @@ msgid "" "cryptsetup failed with return code %(returncode)s:\n" "%(stdout)s\n" "%(stderr)s" -msgstr "«cryptsetup» ناموفق با كد %(returncode)s:⏎ %(stdout)s⏎ %(stderr)s" +msgstr "«cryptsetup» ناموفق با كد %(returncode)s:\\n\n%(stdout)s\\n\n%(stderr)s" #: ../GdmGreeter/persistence.py:124 #, python-format @@ -125,11 +125,11 @@ msgid "" "live-persist failed with return code %(returncode)s:\n" "%(stdout)s\n" "%(stderr)s" -msgstr "«live-persist» ناموفق با كد %(returncode)s:⏎ %(stdout)s⏎ %(stderr)s" +msgstr "«live-persist» ناموفق با كد %(returncode)s:\\n\n%(stdout)s\\n\n%(stderr)s" #: ../GdmGreeter/persistencewindow.py:94 msgid "<i>Wrong passphrase. Please try again.</i>" -msgstr "<i>عبارت عبور درست نیست. بفرمایید دوباره سعی‌کنید.</i>" +msgstr "<i>عبارت عبور درست نیست. لطفاً دوباره سعی‌کنید.</i>" #: ../GdmGreeter/langpanel.py:124 ../GdmGreeter/langpanel.py:148 #: ../GdmGreeter/langpanel.py:181

1 0

[translation/tails-greeter] Update translations for tails-greeter
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit 4298a853d3a56dd7e5e58bf1c34503a93a9c42ec Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 15:46:16 2013 +0000 Update translations for tails-greeter --- fa/fa.po | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/fa/fa.po b/fa/fa.po index 4b284e2..1533192 100644 --- a/fa/fa.po +++ b/fa/fa.po @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2012-06-01 15:10+0200\n" -"PO-Revision-Date: 2013-02-21 17:51+0000\n" +"PO-Revision-Date: 2013-02-22 15:34+0000\n" "Last-Translator: zendegi <hamahangi(a)posteo.eu>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -58,13 +58,13 @@ msgstr "گزینه‌های بیشتری؟" #: ../glade/optionswindow.glade.h:3 msgid "Administration password" -msgstr "رمز عبور اداره" +msgstr "رمز عبور مديريت" #: ../glade/optionswindow.glade.h:4 msgid "" "Enter an administration password in case you need to perform administration tasks.\n" "Otherwise it will be disabled for better security." -msgstr "بفرماييد رمز عبور اداره واردكنيد، در صورتى كه نياز داريد كارهاى اداره انجام بدهيد. ⏎ وگرنه براى امنيت بيشتر غيرفعال مى‌شود." +msgstr "لطفاً رمز عبور مديريتى واردكنيد، در صورتى كه لازم‌است كارهاى مديريت انجام بدهيد.\\n\nوگرنه، اين گزينه براى امنيت بيشتر غيرفعال مى‌شود." #: ../glade/optionswindow.glade.h:6 msgid "Password:" @@ -72,7 +72,7 @@ msgstr "رمز عبور" #: ../glade/optionswindow.glade.h:7 msgid "Verify Password:" -msgstr "بازبينى‌كردن رمز عبور" +msgstr "تاييد رمز عبور" #: ../glade/optionswindow.glade.h:9 msgid "Windows Camouflage" @@ -82,7 +82,7 @@ msgstr "پوشش ویندوز" msgid "" "This option makes Tails look more like Microsoft Windows XP. This may be " "useful in public places in order to avoid attracting suspicion." -msgstr "این گزینه کار می‌کند که تیلزرا شابه مایکروسافت ویندوز اکس پی بیشتر به نظر برسد. این گزینه شاید در محلات عامه به دردتان بخورد." +msgstr "این گزینه کار می‌کند که تیلزرا بيشتر شابه مایکروسافت ویندوز اکس پی به نظر برسد. این گزینه شاید در محلات عامه به دردتان بخورد براى اين كه از ظن ديگران طفره‌رويد." #: ../glade/optionswindow.glade.h:11 msgid "Activate Microsoft Windows XP Camouflage" @@ -98,7 +98,7 @@ msgstr "محل" #: ../glade/langpanel.glade.h:4 msgid "Layout" -msgstr "طرح" +msgstr "صفحه‌بندى" #: ../GdmGreeter/optionswindow.py:68 msgid "<i>Passwords do not match</i>" @@ -109,7 +109,7 @@ msgstr "<i>رمزهاى عبور با هم مطابقت ندارند</i>" msgid "" "live-persist failed with return code %(returncode)s:\n" "%(stderr)s" -msgstr "«live-persist» ناموفق با كد %(returncode)s:⏎ %(stderr)s" +msgstr "live-persist ناموفق با كد %(returncode)s:\\n\n%(stderr)s" #: ../GdmGreeter/persistence.py:99 #, python-format @@ -117,7 +117,7 @@ msgid "" "cryptsetup failed with return code %(returncode)s:\n" "%(stdout)s\n" "%(stderr)s" -msgstr "«cryptsetup» ناموفق با كد %(returncode)s:⏎ %(stdout)s⏎ %(stderr)s" +msgstr "«cryptsetup» ناموفق با كد %(returncode)s:\\n\n%(stdout)s\\n\n%(stderr)s" #: ../GdmGreeter/persistence.py:124 #, python-format @@ -125,11 +125,11 @@ msgid "" "live-persist failed with return code %(returncode)s:\n" "%(stdout)s\n" "%(stderr)s" -msgstr "«live-persist» ناموفق با كد %(returncode)s:⏎ %(stdout)s⏎ %(stderr)s" +msgstr "«live-persist» ناموفق با كد %(returncode)s:\\n\n%(stdout)s\\n\n%(stderr)s" #: ../GdmGreeter/persistencewindow.py:94 msgid "<i>Wrong passphrase. Please try again.</i>" -msgstr "<i>عبارت عبور درست نیست. بفرمایید دوباره سعی‌کنید.</i>" +msgstr "<i>عبارت عبور درست نیست. لطفاً دوباره سعی‌کنید.</i>" #: ../GdmGreeter/langpanel.py:124 ../GdmGreeter/langpanel.py:148 #: ../GdmGreeter/langpanel.py:181

1 0

[translation/liveusb-creator] Update translations for liveusb-creator
by translation＠torproject.org 22 Feb '13

22 Feb '13

commit 760178ef21460523bb0042356a1955c941e28398 Author: Translation commit bot <translation(a)torproject.org> Date: Fri Feb 22 15:46:11 2013 +0000 Update translations for liveusb-creator --- lv/lv.po | 39 ++++++++++++++++++++------------------- 1 files changed, 20 insertions(+), 19 deletions(-) diff --git a/lv/lv.po b/lv/lv.po index dbea183..a422f83 100644 --- a/lv/lv.po +++ b/lv/lv.po @@ -4,12 +4,13 @@ # # Translators: # Ojars Balcers <ojars.balcers(a)gmail.com>, 2012. +# Ojārs Balcers <ojars.balcers(a)gmail.com>, 2013. msgid "" msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2013-02-14 16:07+0100\n" -"PO-Revision-Date: 2013-02-15 14:42+0000\n" +"PO-Revision-Date: 2013-02-22 15:41+0000\n" "Last-Translator: Ojars Balcers <ojars.balcers(a)gmail.com>\n" "Language-Team: LANGUAGE <LL(a)li.org>\n" "MIME-Version: 1.0\n" @@ -21,7 +22,7 @@ msgstr "" #: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149 #, python-format msgid "%(distribution)s LiveUSB Creator" -msgstr "" +msgstr "%(distribution)s LiveUSB Creator" #: ../liveusb/gui.py:758 #, python-format @@ -40,7 +41,7 @@ msgid "" "p, li { white-space: pre-wrap; }\n" "</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" "<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>" -msgstr "" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Nepieciešama palīdzība? Lasiet </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>" #: ../liveusb/launcher_ui.py:151 msgid "" @@ -49,7 +50,7 @@ msgid "" "p, li { white-space: pre-wrap; }\n" "</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>" -msgstr "" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Kopēt uz USB zibatmiņas izpildāmu Tails. Dati mērķdzinī netiks saglabāti.</span></p></body></html>" #: ../liveusb/launcher_ui.py:153 msgid "" @@ -58,7 +59,7 @@ msgid "" "p, li { white-space: pre-wrap; }\n" "</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>" -msgstr "" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Kopēt uz jau instalētas USB zibatmiņas izpildāmu Tails. Citas diska partīcijas tiks saglabāti.</span></p></body></html>" #: ../liveusb/launcher_ui.py:155 msgid "" @@ -67,15 +68,15 @@ msgid "" "p, li { white-space: pre-wrap; }\n" "</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n" "<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>" -msgstr "" +msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//LV\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Ar jaunu ISO attēlu jaunināt jau instalētu Tails USB zibatmiņu.</span></p></body></html>" #: ../liveusb/dialog.py:154 msgid "Alt+B" -msgstr "" +msgstr "Alt+B" #: ../liveusb/dialog.py:153 msgid "Browse" -msgstr "" +msgstr "Pārlūkot" #: ../liveusb/dialog.py:160 msgid "" @@ -104,18 +105,18 @@ msgid "" "Clone\n" "&&\n" "Install" -msgstr "" +msgstr "Klonēt\n&&\ninstalēt" #: ../liveusb/launcher_ui.py:152 msgid "" "Clone\n" "&&\n" "Upgrade" -msgstr "" +msgstr "Klonēt\n&&\njaunināt" #: ../liveusb/dialog.py:165 msgid "Create Live USB" -msgstr "" +msgstr "Izveidot Dzīvu USB" #: ../liveusb/creator.py:429 #, python-format @@ -136,7 +137,7 @@ msgstr "Ierīce ir pārāk maza: tai jābūt vismaz %s MiB lielai." #: ../liveusb/dialog.py:157 #, python-format msgid "Download %(distribution)s" -msgstr "" +msgstr "Lejuplādēt %(distribution)s" #: ../liveusb/gui.py:732 msgid "Download complete!" @@ -192,7 +193,7 @@ msgstr "ISO MD5 kontrolsummas verifikācija bija nesekmīga" msgid "" "If you do not select an existing Live ISO, the selected release will be " "downloaded for you." -msgstr "" +msgstr "Ja neizvēlēsities esošu Dzīvu ISO, tiks lejuplādēts atlasītais izlaidums." #: ../liveusb/gui.py:601 msgid "Installation complete!" @@ -258,7 +259,7 @@ msgstr "Pastāvīgā krātuve" #: ../liveusb/dialog.py:161 msgid "Persistent Storage (0 MB)" -msgstr "" +msgstr "Pastāvīga glabātuve (0 MB)" #: ../liveusb/gui.py:661 ../liveusb/gui.py:678 msgid "Press 'Next' if you wish to continue." @@ -266,7 +267,7 @@ msgstr "Nospiediet 'Nākamais', ja vēlaties turpināt." #: ../liveusb/gui.py:452 msgid "Refreshing releases..." -msgstr "" +msgstr "Atsvaidzinoši izlaidumi..." #: ../liveusb/gui.py:457 msgid "Releases updated!" @@ -312,7 +313,7 @@ msgstr "Sinhronizē datus uz diska..." #: ../liveusb/dialog.py:159 msgid "Target Device" -msgstr "" +msgstr "Mērķierīce" #: ../liveusb/gui.py:625 msgid "" @@ -475,11 +476,11 @@ msgstr "Neatbalstīta datņu sistēma: %s\nLūdzu veiciet datu rezerves kopēša #: ../liveusb/launcher_ui.py:154 msgid "Upgrade from ISO" -msgstr "" +msgstr "Jaunināt no ISO" #: ../liveusb/dialog.py:152 msgid "Use existing Live system ISO" -msgstr "" +msgstr "Lietot esošo Dzīvas sistēmas ISO" #: ../liveusb/creator.py:132 msgid "Verifying ISO MD5 checksum" @@ -547,4 +548,4 @@ msgstr "Uz ierīces jau ir LiveOS.\nJa turpināsiet, tas tiks pārrakstīts." #: ../liveusb/dialog.py:155 msgid "or" -msgstr "" +msgstr "vai"

1 0