Hi, i have 2 new relais running and have also installed nyx. When i go to the page 2 in nyx is there no connection. But my network show me over 4000 tor connections .
What is the issue with nyx on my torservers ?
TorGate torgate(at)linux-hus.dk
I have also restartet tor but isnt working. There are no connections shown.
system is freebsd and py2.7
Ideas ???
Am 14.01.2018 um 12:26 schrieb TorGate torgate@linux-hus.dk:
Hi, i have 2 new relais running and have also installed nyx. When i go to the page 2 in nyx is there no connection. But my network show me over 4000 tor connections .
What is the issue with nyx on my torservers ?
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk
is working again :-)
Am 14.01.2018 um 16:39 schrieb TorGate torgate@linux-hus.dk:
I have also restartet tor but isnt working. There are no connections shown.
system is freebsd and py2.7
Ideas ???
Am 14.01.2018 um 12:26 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
Hi, i have 2 new relais running and have also installed nyx. When i go to the page 2 in nyx is there no connection. But my network show me over 4000 tor connections .
What is the issue with nyx on my torservers ?
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk
Hi again, the same issue again. after couple of times, no connections shown on page 2 in nyx. connection is via ssh.
(FreeBSD 11.1-RELEASE) Tor 0.3.1.9 (recommended)
hm no ideas ? :-)
regards Steffen
Am 14.01.2018 um 21:01 schrieb TorGate torgate@linux-hus.dk:
is working again :-)
Am 14.01.2018 um 16:39 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
I have also restartet tor but isnt working. There are no connections shown.
system is freebsd and py2.7
Ideas ???
Am 14.01.2018 um 12:26 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
Hi, i have 2 new relais running and have also installed nyx. When i go to the page 2 in nyx is there no connection. But my network show me over 4000 tor connections .
What is the issue with nyx on my torservers ?
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk
Hi Steffen
do you tried any other monitoring tool? the onion box or something else, maybe. perhaps this will give us a hint, if nyx or tor is buggy ...
greetings Uli
Am 15.01.2018 um 20:40 schrieb TorGate:
Hi again, the same issue again. after couple of times, no connections shown on page 2 in nyx. connection is via ssh.
(FreeBSD 11.1-RELEASE) Tor 0.3.1.9 (recommended)
hm no ideas ? :-)
regards Steffen
Am 14.01.2018 um 21:01 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
is working again :-)
Am 14.01.2018 um 16:39 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
I have also restartet tor but isnt working. There are no connections shown.
system is freebsd and py2.7
Ideas ???
Am 14.01.2018 um 12:26 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
Hi, i have 2 new relais running and have also installed nyx. When i go to the page 2 in nyx is there no connection. But my network show me over 4000 tor connections .
What is the issue with nyx on my torservers ?
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
--- Diese E-Mail wurde von AVG auf Viren geprüft. http://www.avg.com
Nabend and Hi to all, ok i try with onion box.
Am 15.01.2018 um 22:52 schrieb Arisbe arisbe@cni.net:
I installed nyx on several on my smaller non-exit/guard relays. I'm hopeful this will replace the problems I have with arm but I'm finding a number of issues:
nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
IP addresses do not have country identification but rather all just have (??);
nyx rejects some of the options in nyxrc. Specifically, I had to # out tor_chroot, color_override and logged_events. I had to specifically enter options for connection_order as nyx did not recognize the default value. nyx did not recognize the values for logged_ events or config_order when typed in;
There is no man page for nyx.
Thanks so much for your effort on this project. I'm sorry to be the bearer of a bad feedback. Don't kill the messenger!
On 1/15/2018 11:55 AM, Uli wrote:
Hi Steffen do you tried any other monitoring tool? the onion box or something else, maybe. perhaps this will give us a hint, if nyx or tor is buggy ... greetings Uli
Am 15.01.2018 um 20:40 schrieb TorGate:
Hi again, the same issue again. after couple of times, no connections shown on page 2 in nyx. connection is via ssh.
(FreeBSD 11.1-RELEASE) Tor 0.3.1.9 (recommended)
hm no ideas ? :-)
regards Steffen
Am 14.01.2018 um 21:01 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
is working again :-)
Am 14.01.2018 um 16:39 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
I have also restartet tor but isnt working. There are no connections shown.
system is freebsd and py2.7
Ideas ???
Am 14.01.2018 um 12:26 schrieb TorGate <torgate@linux-hus.dk mailto:torgate@linux-hus.dk>:
Hi, i have 2 new relais running and have also installed nyx. When i go to the page 2 in nyx is there no connection. But my network show me over 4000 tor connections .
What is the issue with nyx on my torservers ?
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
TorGate torgate(at)linux-hus.dk http://linux-hus.dk/
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient Virenfrei. www.avg.com http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient x-msg://12/#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come
visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP
only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just
have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://nyx.torproject.org/#configuration
- There is no man page for nyx.
Actually, there is.
https://gitweb.torproject.org/nyx.git/tree/nyx.1
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson atagar@torproject.org:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://nyx.torproject.org/#configuration https://nyx.torproject.org/#configuration
- There is no man page for nyx.
Actually, there is.
https://gitweb.torproject.org/nyx.git/tree/nyx.1 https://gitweb.torproject.org/nyx.git/tree/nyx.1
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian _______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell Penn Cambria School District
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://nyx.torproject.org/#configuration https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://gitweb.torproject.org/nyx.git/tree/nyx.1 https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server and nyx is working properly again. I'm thinking something was hanging in the background or something that the reboot fixed, though I'm not sure what it could have been. (Python and nyx are still the same versions, so I'm thinking my updates didn't fix it but the reboot fixed whatever was hung in the background. Maybe I'll check on my other relay to see if I can figure out what specifically is causing it to not show connections.)
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 8:02 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://nyx.torproject.org/#configuration https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://gitweb.torproject.org/nyx.git/tree/nyx.1 https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
Logged back in to check on it again this morning, and nyx is back to not displaying any connections on the 2nd page.
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 9:25 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server and nyx is working properly again. I'm thinking something was hanging in the background or something that the reboot fixed, though I'm not sure what it could have been. (Python and nyx are still the same versions, so I'm thinking my updates didn't fix it but the reboot fixed whatever was hung in the background. Maybe I'll check on my other relay to see if I can figure out what specifically is causing it to not show connections.)
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 8:02 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://nyx.torproject.org/#configuration https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://gitweb.torproject.org/nyx.git/tree/nyx.1 https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
Hi John, I require the redacted logs to be able to help at all.
On Wed, Jan 17, 2018 at 6:32 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
Logged back in to check on it again this morning, and nyx is back to not displaying any connections on the 2nd page.
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 9:25 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server and nyx is working properly again. I'm thinking something was hanging in the background or something that the reboot fixed, though I'm not sure what it could have been. (Python and nyx are still the same versions, so I'm thinking my updates didn't fix it but the reboot fixed whatever was hung in the background. Maybe I'll check on my other relay to see if I can figure out what specifically is causing it to not show connections.)
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 8:02 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://nyx.torproject.org/#configuration https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://gitweb.torproject.org/nyx.git/tree/nyx.1 https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
What logs do you need? I only logging at notice level in tor, so they're not any help.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of Damian Johnson Sent: Wednesday, January 17, 2018 10:58 AM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Hi John, I require the redacted logs to be able to help at all.
On Wed, Jan 17, 2018 at 6:32 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
Logged back in to check on it again this morning, and nyx is back to not displaying any connections on the 2nd page.
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 9:25 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server and nyx is working properly again. I'm thinking something was hanging in the background or something that the reboot fixed, though I'm not sure what it could have been. (Python and nyx are still the same versions, so I'm thinking my updates didn't fix it but the reboot fixed whatever was hung in the background. Maybe I'll check on my other relay to see if I can figure out what specifically is causing it to not show connections.)
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 8:02 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproj... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torp... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
https://na01.safelinks.protection.outlook.com/?url=www.pcam.org&data=02%...https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pcam.org&data=02%7C01%7C%7Ca256bea416dd493a69d108d55dc441dd%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636518019875476846&sdata=ogQhkzpfc5V0L2a%2Fp1%2BAgSYC0M3STx%2FPb%2FREJV%2FknrQ%3D&reserved=0
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
Hi John, simply run 'nyx --debug' as discussed with Arisbe on this thread.
[1] https://lists.torproject.org/pipermail/tor-relays/2018-January/014173.html
On Wed, Jan 17, 2018 at 9:18 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
What logs do you need? I only logging at notice level in tor, so they're not any help.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of Damian Johnson Sent: Wednesday, January 17, 2018 10:58 AM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Hi John, I require the redacted logs to be able to help at all.
On Wed, Jan 17, 2018 at 6:32 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
Logged back in to check on it again this morning, and nyx is back to not displaying any connections on the 2nd page.
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 9:25 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server and nyx is working properly again. I'm thinking something was hanging in the background or something that the reboot fixed, though I'm not sure what it could have been. (Python and nyx are still the same versions, so I'm thinking my updates didn't fix it but the reboot fixed whatever was hung in the background. Maybe I'll check on my other relay to see if I can figure out what specifically is causing it to not show connections.)
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 8:02 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproj... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torp... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
https://na01.safelinks.protection.outlook.com/?url=www.pcam.org&data=02%...https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pcam.org&data=02%7C01%7C%7Ca256bea416dd493a69d108d55dc441dd%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636518019875476846&sdata=ogQhkzpfc5V0L2a%2Fp1%2BAgSYC0M3STx%2FPb%2FREJV%2FknrQ%3D&reserved=0
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Sorry, I somehow missed that in the conversation. I'm sending you the logfile off list as I'm sure I probably left stuff in there that should have been redacted.
-- John McDonnell Penn Cambria School District
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of Damian Johnson Sent: Wednesday, January 17, 2018 12:24 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Hi John, simply run 'nyx --debug' as discussed with Arisbe on this thread.
[1] https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
On Wed, Jan 17, 2018 at 9:18 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
What logs do you need? I only logging at notice level in tor, so they're not any help.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of Damian Johnson Sent: Wednesday, January 17, 2018 10:58 AM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Hi John, I require the redacted logs to be able to help at all.
On Wed, Jan 17, 2018 at 6:32 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
Logged back in to check on it again this morning, and nyx is back to not displaying any connections on the 2nd page.
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 9:25 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server and nyx is working properly again. I'm thinking something was hanging in the background or something that the reboot fixed, though I'm not sure what it could have been. (Python and nyx are still the same versions, so I'm thinking my updates didn't fix it but the reboot fixed whatever was hung in the background. Maybe I'll check on my other relay to see if I can figure out what specifically is causing it to not show connections.)
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 8:02 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproj... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torp... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
https://na01.safelinks.protection.outlook.com/?url=www.pcam.org&data=02%...https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pcam.org&data=02%7C01%7C%7Ca256bea416dd493a69d108d55dc441dd%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636518019875476846&sdata=ogQhkzpfc5V0L2a%2Fp1%2BAgSYC0M3STx%2FPb%2FREJV%2FknrQ%3D&reserved=0
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
https://na01.safelinks.protection.outlook.com/?url=www.pcam.org&data=02%...https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pcam.org&data=02%7C01%7C%7C74d036dc1bd4461d86d808d55dcf36e5%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636518066926438053&sdata=x7iZt0oxgX0zDFsligV%2BxrdK0EalOhgbn5ZFOhtpU1k%3D&reserved=0
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
Just to post an update on the list in case someone else comes across this, what we found is that nyx is using proc by default to display connections, which isn't on FreeBSD by default. The solution is to set DisableDebuggerAttachment 0 (is defaulted to 1 which prevents users other than root from accessing tor's memory) in the torrc or possibly configure FreeBSD to emulate proc. Since this server is only really running tor and the only users with login are root (via console only) and myself, I opted to set the option in my torrc instead of adding complexity to the system. (I also have some sysctl settings that should also prevent users other than root and the _tor user from reading tor's memory.)
After setting DisableDebuggerAttachmnet, I am able to see connections on the connections page. What I had previously seen occasionally was the circuit information, which is retrieved in a different manner from connections. Still not sure why it is only showing the circuits randomly. I am still apparently having issues with the circuit information showing up as I just noticed when I checked the page as I typed this up, the circuits have disappeared from the list again.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of Damian Johnson Sent: Wednesday, January 17, 2018 12:24 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Hi John, simply run 'nyx --debug' as discussed with Arisbe on this thread.
[1] https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
On Wed, Jan 17, 2018 at 9:18 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
What logs do you need? I only logging at notice level in tor, so they're not any help.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of Damian Johnson Sent: Wednesday, January 17, 2018 10:58 AM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Hi John, I require the redacted logs to be able to help at all.
On Wed, Jan 17, 2018 at 6:32 AM, John D. McDonnell mcdonnjd@pcam.org wrote:
Logged back in to check on it again this morning, and nyx is back to not displaying any connections on the 2nd page.
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 9:25 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Just updated FreeBSD and updated tor to 0.3.2.9 and rebooted the whole server and nyx is working properly again. I'm thinking something was hanging in the background or something that the reboot fixed, though I'm not sure what it could have been. (Python and nyx are still the same versions, so I'm thinking my updates didn't fix it but the reboot fixed whatever was hung in the background. Maybe I'll check on my other relay to see if I can figure out what specifically is causing it to not show connections.)
-- John McDonnell
-----Original Message----- From: John D. McDonnell Sent: Tuesday, January 16, 2018 8:02 PM To: 'tor-relays@lists.torproject.org' tor-relays@lists.torproject.org Subject: RE: [tor-relays] nyx no connections shown
Nyx was working fine until sometime last week when I had the same issue where the connection page was suddenly blank. It came back a while later but then went blank again. I just checked again and the connections page is still coming up as blank. I'm also on FreeBSD running tor 0.3.1.9.
FreeBSD 11.1-RELEASE-p4 tor-0.3.1.9_1 python27-2.7.14_1 py27-nyx-2.0.4
I'm not sure when exactly I noticed the connections page started showing up as blank as I usually only spot check the first page and maybe check the notices.log file.
I'm going to check for updates and then see what happens after.
-- John McDonnell
-----Original Message----- From: tor-relays [mailto:tor-relays-bounces@lists.torproject.org] On Behalf Of TorGate Sent: Monday, January 15, 2018 7:14 PM To: tor-relays@lists.torproject.org Subject: Re: [tor-relays] nyx no connections shown
Thank you, its working :-) But can i also show connections ?
Steffen
Am 15.01.2018 um 23:49 schrieb Damian Johnson <atagar@torproject.org mailto:atagar@torproject.org >:
Thanks Arisbe! This is useful.
- nyx is way slow to start up. Sometimes taking 20 seconds to come visible. The contacts page (page 2) does come up eventually but sometimes takes 10 minutes;
Weird. Nyx should be quicker in that respect than the old arm codebase. Please run 'nyx --debug' and send me the debug log, minus anything you think is sensitive.
- the inbound and outbound connections on page two are listed by IP only and not sorted by inbound/outbound;
Not sure I follow. Is this purely a sorting issue or are inbound/outbound not properly labeled? This is something a screenshot might help with.
- IP addresses do not have country identification but rather all just have (??);
Hopefully the debug log will help with this too. This should be coming from tor.
- nyx rejects some of the options in nyxrc
Yup, the nyxrc options are different from the old armrc. They're listed on...
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproj... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnyx.torproject.org%2F%23configuration&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=63h7wDPnpf1ATZWjivaoHM%2Bx0gqx%2F7eQcw3E0GxP7nc%3D&reserved=0
- There is no man page for nyx.
Actually, there is.
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torp... https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitweb.torproject.org%2Fnyx.git%2Ftree%2Fnyx.1&data=02%7C01%7C%7Caa6bedc69ca04acb280908d55c76131d%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636516584561576746&sdata=Zn4uJiRKtphBf96feG9jRK4UAadqMvEzGZx8bDLYv6I%3D&reserved=0
Arm attempted to guess where to install it when you ran 'python setup.py install' but doing so caused problems. Unfortunately the path man pages are located at varies by the platform so I now leave it up to package managers (yum, emerge, etc). Are you on Debian or Ubuntu? That's the most common pain point right now - a package will hopefully be available for those soonish.
Cheers! -Damian
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
https://na01.safelinks.protection.outlook.com/?url=www.pcam.org&data=02%...https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pcam.org&data=02%7C01%7C%7Ca256bea416dd493a69d108d55dc441dd%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636518019875476846&sdata=ogQhkzpfc5V0L2a%2Fp1%2BAgSYC0M3STx%2FPb%2FREJV%2FknrQ%3D&reserved=0
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
https://na01.safelinks.protection.outlook.com/?url=www.pcam.org&data=02%...https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pcam.org&data=02%7C01%7C%7C74d036dc1bd4461d86d808d55dcf36e5%7C4d0a72eeba2646d58bbe6430f01b636a%7C0%7C0%7C636518066926438053&sdata=x7iZt0oxgX0zDFsligV%2BxrdK0EalOhgbn5ZFOhtpU1k%3D&reserved=0
tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.torpr...
Penn Cambria School District
This e-mail and any files transmitted with it are confidential and intended only for the person or entity to which it is addressed. If you have received this email in error, please notify the sender immediately via email and delete this email along with any attachments from your system. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this e-mail and attached documents is strictly prohibited. The views and opinions of this email or attachments are reflections of the author and are not necessarily the views and opinions of Penn Cambria School District. We do not accept responsibility or liability for any loss or damage from the receipt of this email, its use, or for any errors or omissions.
www.pcam.orghttp://www.pcam.org
tor-relays@lists.torproject.org