Relay, bridge, and family members
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, Now I created a bridge, I'd like to create a relay on a dedicated server. I read about the FamilyMembers configuration value, to list all relay which are from the same owner. If I create another relay, do I have to put the bridge fingerprint to the new relay and put the relay fingerprint in the bridge configuration? Thanks, - -- Patrick ZAJDA Skype : gansta93 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJS1qH1AAoJEKPVT2DeSPb4+QUIALJNLP9MsGN8FbPEP6EegNV9 gcc66Iz2Z7maJD35pMquQqBqJrK+Zo6brSe2aX0N9+GipV9+jCpMa0hUOfzsf1h8 oebEjDLPgf4nxE6GuztU7Jkm0XwqHFmT1ELFPS2qU/EwGOBhj4l0Pywff7qfhBBC nvM+5O6+DRVD/44RGyhQqaNCDkxYuUkcLMJUX104RCoBQ6WmPYRBEPBm8YbrPKmc eGZNpRggSDRYzITZrT0SneIzExFP5IbTdGlHidyL4it70iJDI+LBZsm/ZGMENv/h lUYHe8RQbmDgt81BB+dq763zIeFMvBMOtJEdVdWPtuzsGypLxWJPMiR0NKqf6ZI= =X0ps -----END PGP SIGNATURE-----
If you are talking about the "MyFamily" setting, the documentation is very clear on this: "Do not list any bridge relay as it would compromise its concealment." Best regards, Alexander --- PGP Key: 0xC55A356B | https://dietrich.cx/pgp On 2014-01-15 15:57, Patrick ZAJDA wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi all,
Now I created a bridge, I'd like to create a relay on a dedicated server.
I read about the FamilyMembers configuration value, to list all relay which are from the same owner.
If I create another relay, do I have to put the bridge fingerprint to the new relay and put the relay fingerprint in the bridge configuration?
Thanks, - -- Patrick ZAJDA Skype : gansta93 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBAgAGBQJS1qH1AAoJEKPVT2DeSPb4+QUIALJNLP9MsGN8FbPEP6EegNV9 gcc66Iz2Z7maJD35pMquQqBqJrK+Zo6brSe2aX0N9+GipV9+jCpMa0hUOfzsf1h8 oebEjDLPgf4nxE6GuztU7Jkm0XwqHFmT1ELFPS2qU/EwGOBhj4l0Pywff7qfhBBC nvM+5O6+DRVD/44RGyhQqaNCDkxYuUkcLMJUX104RCoBQ6WmPYRBEPBm8YbrPKmc eGZNpRggSDRYzITZrT0SneIzExFP5IbTdGlHidyL4it70iJDI+LBZsm/ZGMENv/h lUYHe8RQbmDgt81BB+dq763zIeFMvBMOtJEdVdWPtuzsGypLxWJPMiR0NKqf6ZI= =X0ps -----END PGP SIGNATURE-----
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Alexander, Yes, I was talking about the MyFamily setting. So I'll only put the relay in the bridge configuration. Thanks, Patrick Le 15/01/2014 17:59, Alexander Dietrich a écrit :
If you are talking about the "MyFamily" setting, the documentation is very clear on this: "Do not list any bridge relay as it would compromise its concealment."
Best regards, Alexander --- PGP Key: 0xC55A356B | https://dietrich.cx/pgp
On 2014-01-15 15:57, Patrick ZAJDA wrote: Hi all,
Now I created a bridge, I'd like to create a relay on a dedicated server.
I read about the FamilyMembers configuration value, to list all relay which are from the same owner.
If I create another relay, do I have to put the bridge fingerprint to the new relay and put the relay fingerprint in the bridge configuration?
Thanks,
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
- -- Patrick ZAJDA Skype : gansta93 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJS1sV5AAoJEKPVT2DeSPb46lQH/2p0vtwbiT0QcKap13jW4z5X +Zw0dXBULTlFE2lp6nGDaK2QaxSJMocQc6oztM7vm/k1CObR2lfmZ8dg5tGh6Iar YaIqJ0dn7Znz0NQ6+PUTVHVdOA1aqJRj+CfbYGiw5DDZIUELJxDLT0YhCDujbUDE eTx5PQyEzvXtX7EBIwFZ4GDDUBOZ/JKIDBbDfire5I7HR2BSIg6B8yU+ZYk3laVM EHIQtuWktxQHXpoEgr4cSJL+BQCSBCC4MWwAYqk/bpNDwsNyn8NOB2k00TnS/8p5 zxN2qMCkyAEUE0UGQbciMT36wDuvDeGFifb/nwIRFYMPpbArhQ8pWuXBUG7OeFc= =yn5J -----END PGP SIGNATURE-----
My interpretation of the docs ("When two servers both declare that they are in the same family") would be that configuring only one side of the relation has no effect. But someone with more in-depth knowledge should probably confirm this. Best regards, Alexander --- PGP Key: 0xC55A356B | https://dietrich.cx/pgp On 2014-01-15 18:29, Patrick ZAJDA wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Alexander,
Yes, I was talking about the MyFamily setting. So I'll only put the relay in the bridge configuration.
Thanks,
Patrick Le 15/01/2014 17:59, Alexander Dietrich a écrit :
If you are talking about the "MyFamily" setting, the documentation is very clear on this: "Do not list any bridge relay as it would compromise its concealment."
Best regards, Alexander --- PGP Key: 0xC55A356B | https://dietrich.cx/pgp
On 2014-01-15 15:57, Patrick ZAJDA wrote: Hi all,
Now I created a bridge, I'd like to create a relay on a dedicated server.
I read about the FamilyMembers configuration value, to list all relay which are from the same owner.
If I create another relay, do I have to put the bridge fingerprint to the new relay and put the relay fingerprint in the bridge configuration?
Thanks,
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
- -- Patrick ZAJDA Skype : gansta93 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBAgAGBQJS1sV5AAoJEKPVT2DeSPb46lQH/2p0vtwbiT0QcKap13jW4z5X +Zw0dXBULTlFE2lp6nGDaK2QaxSJMocQc6oztM7vm/k1CObR2lfmZ8dg5tGh6Iar YaIqJ0dn7Znz0NQ6+PUTVHVdOA1aqJRj+CfbYGiw5DDZIUELJxDLT0YhCDujbUDE eTx5PQyEzvXtX7EBIwFZ4GDDUBOZ/JKIDBbDfire5I7HR2BSIg6B8yU+ZYk3laVM EHIQtuWktxQHXpoEgr4cSJL+BQCSBCC4MWwAYqk/bpNDwsNyn8NOB2k00TnS/8p5 zxN2qMCkyAEUE0UGQbciMT36wDuvDeGFifb/nwIRFYMPpbArhQ8pWuXBUG7OeFc= =yn5J -----END PGP SIGNATURE-----
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
On 01/15/2014 06:51 PM, Alexander Dietrich wrote:
My interpretation of the docs ("When two servers both declare that they are in the same family") would be that configuring only one side of the relation has no effect. But someone with more in-depth knowledge should probably confirm this.
That is correct. It only makes sense to set MyFamily once you run more than one non-bridge relay. I am unsure right now why exactly a bridge should not be listed respectively list a family, other than you leak the existence of the bridge(s). -- Moritz Bartl https://www.torservers.net/
Please! I am not participate in this forum anymore! Any e mail that coming after this will be reported to Uk intelligence police (M15) Be aware pls with all posts or e mails here ! Have a nice weekend to all
On 15 Jan 2014, at 17:29, Patrick ZAJDA <patrick@zajda.fr> wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Alexander,
Yes, I was talking about the MyFamily setting. So I'll only put the relay in the bridge configuration.
Thanks,
Patrick Le 15/01/2014 17:59, Alexander Dietrich a écrit :
If you are talking about the "MyFamily" setting, the documentation is very clear on this: "Do not list any bridge relay as it would compromise its concealment."
Best regards, Alexander --- PGP Key: 0xC55A356B | https://dietrich.cx/pgp
On 2014-01-15 15:57, Patrick ZAJDA wrote: Hi all,
Now I created a bridge, I'd like to create a relay on a dedicated server.
I read about the FamilyMembers configuration value, to list all relay which are from the same owner.
If I create another relay, do I have to put the bridge fingerprint to the new relay and put the relay fingerprint in the bridge configuration?
Thanks,
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
_______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
- -- Patrick ZAJDA Skype : gansta93 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBAgAGBQJS1sV5AAoJEKPVT2DeSPb46lQH/2p0vtwbiT0QcKap13jW4z5X +Zw0dXBULTlFE2lp6nGDaK2QaxSJMocQc6oztM7vm/k1CObR2lfmZ8dg5tGh6Iar YaIqJ0dn7Znz0NQ6+PUTVHVdOA1aqJRj+CfbYGiw5DDZIUELJxDLT0YhCDujbUDE eTx5PQyEzvXtX7EBIwFZ4GDDUBOZ/JKIDBbDfire5I7HR2BSIg6B8yU+ZYk3laVM EHIQtuWktxQHXpoEgr4cSJL+BQCSBCC4MWwAYqk/bpNDwsNyn8NOB2k00TnS/8p5 zxN2qMCkyAEUE0UGQbciMT36wDuvDeGFifb/nwIRFYMPpbArhQ8pWuXBUG7OeFc= =yn5J -----END PGP SIGNATURE----- <0xDE48F6F8.asc> <0xDE48F6F8.asc.sig> _______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Patrick, That's a good effort getting through the EC2 set-up!
Hi all,
Now I created a bridge, I'd like to create a relay on a dedicated server. Patrick ZAJDA
A place to look for lower cost virtual private servers is http://lowendbox.com and as well from that http://lowendtalk.com/categories/offers Robert
participants (6)
-
"Felix Büdenhölzer" -
Alexander Dietrich -
Fabiano London -
I -
Moritz Bartl -
Patrick ZAJDA