Dear Tor Developers, Neel and I have spent some time working on proposal 306: A Tor Implementation of IPv6 Happy Eyeballs. I think we now have a proposal that covers all the essential changes to get Tor clients working on IPv4 and IPv6 networks. Here is a summary of the most recent changes: Include extra designs and analysis for: * bootstrapping * load-balancing * onion services (particularly v3 single onion services) I was surprised when I did the load-balancing analysis. Deploying this proposal across the Tor network would result in 33% of client load going to the 20% of guards that support IPv6. Therefore, we need to prioritise IPv6 relay support, before we can implement or deploy this proposal. Fortunately, RIPE has awarded Tor a grant to work on IPv6 relay support in 2020. Here is the full load-balancing analysis: https://gitweb.torproject.org/torspec.git/tree/proposals/306-ipv6-happy-eyeb... And here is a link to some information about the RIPE IPv6 grant: (We'll have more information once we've roadmapped the grant work) https://lists.torproject.org/pipermail/tor-relays/2019-December/017960.html We also simplified the proposal: * tweaked the design to match Tor's standard design patterns, * identified essential and optional changes, * noted that bridge changes are out of scope, and * removed alternative designs that were in earlier drafts. We've been working in this ticket and pull request: https://trac.torproject.org/projects/tor/ticket/29801 https://github.com/torproject/torspec/pull/102 Let's open new tickets for any further changes. See the end of this email for a full copy of the proposal.

On 27 Dec 2019, at 12:23, Neel Chauhan <neel@neelc.org> wrote:

Sorry for the 10-day delay, again. I was busy since I'm moving across the US. Well, I got my first full time job!

Congratulations on the job, Neel! And thanks so much for your patience with this proposal.

...

However, I'm worried I removed something you may feel is necessary.

I'm really happy with what you removed, and listed as optional. I did a final check, and found some statistics in the old draft that might still be useful. So I added them back before merging. Here's a full copy of the current proposal. Feel free to comment inline. Filename: 306-ipv6-happy-eyeballs.txt Title: A Tor Implementation of IPv6 Happy Eyeballs Author: Neel Chauhan Created: 25-Jun-2019 Supercedes: 299 Status: Open Ticket: https://trac.torproject.org/projects/tor/ticket/29801 1. Introduction As IPv4 address space becomes scarce, ISPs and organizations will deploy IPv6 in their networks. Right now, Tor clients connect to entry nodes using IPv4 connectivity by default. When networks first transition to IPv6, both IPv4 and IPv6 will be enabled on most networks in a so-called "dual-stack" configuration. This is to not break existing IPv4-only applications while enabling IPv6 connectivity. However, IPv6 connectivity may be unreliable and clients should be able to connect to the entry node using the most reliable technology, whether IPv4 or IPv6. In ticket #27490, we introduced the option ClientAutoIPv6ORPort which lets a client randomly choose between IPv4 or IPv6. However, this random decision does not take into account unreliable connectivity or falling back to the alternate IP version should one be unreliable or unavailable. One way to select between IPv4 and IPv6 on a dual-stack network is a so-called "Happy Eyeballs" algorithm as per RFC 8305. In one, a client attempts the preferred IP family, whether IPv4 or IPv6. Should it work, the client sticks with the preferred IP family. Otherwise, the client attempts the alternate version. This means if a dual-stack client has both IPv4 and IPv6, and IPv6 is unreliable, preferred or not, the client uses IPv4, and vice versa. However, if IPv4 and IPv6 are both equally reliable, and IPv6 is preferred, we use IPv6. In Proposal 299, we have attempted a IP fallback mechanism using failure counters and preferring IPv4 and IPv6 based on the state of the counters. However, Prop299 was not standard Happy Eyeballs and an alternative, standards-compliant proposal was requested in [P299-TRAC] to avoid issues from complexity caused by randomness. This proposal describes a Tor implementation of Happy Eyeballs and is intended as a successor to Proposal 299. 2. Address/Relay Selection This section describes the necessary changes for address selection to implement Prop306. 2.1. Address Handling Changes To be able to handle Happy Eyeballs in Tor, we will need to modify the data structures used for connections to entry nodes, namely the extend info structure. Entry nodes are usually guards, but some clients don't use guards: * Bootstrapping clients can connect to fallback directory mirrors or authorities * v3 single onion services can use IPv4 or IPv6 addresses to connect to introduction and rendezvous points, and * Clients can be configured to disable entry guards Bridges are out of scope for this proposal, because Tor does not support multiple IP addresses in a single bridge line. The extend info structure should contain both an IPv4 and an IPv6 address. This will allow us to try IPv4 and the IPv6 addresses should both be available on a relay and the client is dual-stack. When processing: * relay descriptors, * hard-coded authority and fallback directory lists, * onion service descriptors, or * onion service introduce cells, and filling in the extend info data structure, we need to fill in both the IPv4 and IPv6 address if both are available. If only one family is available for a relay (IPv4 or IPv6), we should leave the other family null. 2.2 Bootstrap Changes Tor's hard-coded authority and fallback directory mirror lists contain some entries with IPv6 ORPorts. As of January 2020, 56% of authorities and 47% of fallback directories have IPv6. During bootstrapping, we should have an option for the maximum number of IPv4-only nodes, before the next node must have an IPv6 ORPort. The parameter is as follows: * MaxNumIPv4BootstrapAttempts NUM During bootstrap, the minimum fraction of nodes with IPv6 ORPorts will be 1/(1 + MaxNumIPv4BootstrapAttempts). And the average fraction will be larger than both minimum fraction, and the actual proportion of IPv6 ORPorts in the fallback directory list. (Clients mainly use fallback directories for bootstrapping.) Since this option is used during bootstrapping, it can not have a corresponding consensus parameter. The default value for MaxNumIPv4BootstrapAttempts should be 2. This means that every third bootstrap node must have an IPv6 ORPort. And on average, just over half of bootstrap nodes chosen by clients will have an IPv6 ORPort. This change won't have much impact on load-balancing, because almost half the fallback directory mirrors have IPv6 ORPorts. The minimum value of MaxNumIPv4BootstrapAttempts is 0. (Every bootstrap node must have an IPv6 ORPort. This setting is equivalent to ClientPreferIPv6ORPort 1.) The maximum value of MaxNumIPv4BootstrapAttempts should be 100. (Since most clients only make a few bootstrap connections, bootstrap nodes will be chosen at random, regardless of their IPv6 ORPorts.) 2.3. Guard Selection Changes When we select guard candidates, we should have an option for the number of primary IPv6 entry guards. The parameter is as follows: * NumIPv6Guards NUM If UseEntryGuards is set to 1, we will select exactly this number of IPv6 relays for our primary guard list, which is the set of relays we strongly prefer when connecting to the Tor network. (This number should also apply to all of Tor's other guard lists, scaled up based on the relative size of the list.) If NUM is -1, we try to learn the number from the NumIPv6Guards consensus parameter. If the consensus parameter isn't set, we should default to 1. The default value for NumIPv6Guards should be -1. (Use the consensus parameter, or the underlying default value of 1.) As of September 2019, approximately 20% of Tor's guards supported IPv6, by consensus weight. (Excluding exits that are also guards, because clients avoid choosing exits in their guard lists.) If all Tor clients implement NumIPv6Guards, then these 20% of guards will handle approximately 33% of Tor's traffic. (Because the default value of NumPrimaryGuards is 3.) This may have a significant impact on Tor's load-balancing. Therefore, we should deploy this feature gradually, and try to increase the number of relays that support IPv6 to at least 33%. To minimise the impact on load-balancing, IPv6 support should only be required for exactly NumIPv6Guards during guard list selection. All other guards should be IPv4-only guards. Once approximately 50% of guards support IPv6, NumIPv6Guards can become a minimum requirement, rather than an exact requirement. The minimum configurable value of NumIPv6Guards is -1. (Use the consensus parameter, or the underlying default.) The minimum resulting value of NumIPv6Guards is 0. (Guards will be chosen at random, regardless of their IPv6 ORPorts.) The maximum value of NumIPv6Guards should be the configured value of NumPrimaryGuards. (Every guard must have an IPv6 ORPort. This setting is equivalent to ClientPreferIPv6ORPort 1.) 3. Relay Connections If there is an existing authenticated connection, we must use it similar to how we used it pre-Prop306. If there is no existing authenticated connection for an entry node, tor currently attempts to connect using the first available, allowed, and preferred address. (Determined using the existing Client IPv4 and IPv6 options.) We should also allow falling back to the alternate address. For this, a design will be given in Section 3.1. 3.1. TCP Connection to Preferred Address On First TCP Success In this design, we will connect via TCP to the first preferred address. On a failure or after a 250 msec delay, we attempt to connect via TCP to the alternate address. On a success, Tor attempts to authenticate and closes the other connection. This design is close to RFC 8305 and is similar to how Happy Eyeballs is implemented in a web browser. 3.2. Handling Connection Successes And Failures Should a connection to a entry node succeed and is authenticated via TLS, we can then use the connection. In this case, we should cancel all other connection timers and in-progress connections. Cancelling the timers is necessary so we don't attempt new unnecessary connections when our existing connection is successful, preventing denial-of-service risks. However, if we fail all available and allowed connections, we should tell the rest of Tor that the connection has failed. This is so we can attempt another entry node. 3.3. Connection Attempt Delays As mentioned in [TEOR-P306-REP], initially, clients should prefer IPv4 by default. The Connection Attempt Delay, or delay between IPv4 and IPv6 connections should be 250 msec. This is to avoid the overhead from tunneled IPv6 connections. The Connection Attempt Delay should not be dynamically adjusted, as it adds privacy risks. This value should be fixed, and could be manually adjusted using this torrc option or consensus parameter: * ConnectionAttemptDelay N [msec|second] The Minimum and Maximum Connection Attempt Delays should also not be dynamically adjusted for privacy reasons. The Minimum should be fixed at 10 msec as per RFC 8305. But the maximum should be higher than the RFC 8305 recommendation of 2 seconds. For Tor, we should make this timeout value 30 seconds to match Tor's existing timeout. We need to make it possible for users to set the Maximum Connection Attempt Delay value higher for slower and higher-latency networks such as dial-up and satellite. 4. Option Changes As we enable IPv6-enabled clients to connect out of the box, we should adjust the default options to enable IPv6 while not breaking IPv4-only clients. The new default options should be: * ClientUseIPv4 1 (to enable IPv4) * ClientUseIPv6 1 (to enable IPv6) * ClientPreferIPv6ORPort 0 (for load-balancing reasons so we don't overload IPv6-only guards) * ConnectionAttemptDelay 250 msec (the recommended delay between IPv4 and IPv6, as per RFC 8305) One thing to note is that clients should be able to connect with the above options on IPv4-only, dual-stack, and IPv6-only networks, and they should also work if ClientPreferIPv6ORPort is 1. But we shouldn't expect IPv4 or IPv6 to work if ClientUseIPv4 or ClientUseIPv6 is set to 0. When the majority of clients and relay are IPv6-capable, we could set the default value of ClientPreferIPv6ORPort to 1, in order to take advantage of IPv6. We could add a ClientPreferIPv6ORPort consensus parameter, so we can make this change network-wide. 5. Relay Statistics Entry nodes could measure the following statistics for both IPv4 and IPv6: * Number of successful connections * Number of extra Prop306 connections (unsuccessful or cancelled) * Client closes the connection before completing TLS * Client closes the connection before sending any circuit or data cells * Number of client and relay connections * We can distinguish between authenticated (relay, authority reachability) and unauthenticated (client, bridge) connections Should we implement Section 5: * We can send this information to the directory authorities using relay extra-info descriptors * We should consider the privacy implications of these statistics, and how much noise we need to add to them * We can include these statistics in the Heartbeat logs 6. Initial Feasibility Testing We should test this proposal with the following scenarios: * Different combinations of values for the options ClientUseIPv4, ClientUseIPv6, and ClientPreferIPv6ORPort on IPv4-only, IPv6-only, and dual-stack connections * Dual-stack connections of different technologies, including high-bandwidth and low-latency (e.g. FTTH), moderate-bandwidth and moderate-latency (e.g. DSL, LTE), and high-latency and low-bandwidth (e.g. satellite, dial-up) to see if Prop306 is reliable and feasible 7. Minimum Viable Prop306 Product The mimumum viable product for Prop306 must include the following: * The address handling, bootstrap, and entry guard changes described in Section 2. (Single Onion Services are optional, Bridge Clients are out of scope. The consensus parameter and torrc options are optional.) * The alternative address retry algorithm in Section 3.1. * The Connection Success/Failure mechanism in Section 3.2. * The Connection Delay mechanism in Section 3.3. (The ConnectionAttemptDelay torrc option and consensus parameter are optional.) * A default setup capable of both IPv4 and IPv6 connections with the options described in Section 4. (The ClientPreferIPv6ORPort consensus parameter is optional.) 8. Optional Features Some features which are optional include: * Single Onion services: extend info address changes for onion service descriptors and introduce cells. (Section 2.1.) * Bridge clients are out of scope: they would require bridge line format changes, internal bridge data structure changes, and extend info address changes. (Section 2.1.) * MaxNumIPv4BootstrapAttempts torrc option. We may need this option if the proposed default doesn't work for some clients. (Section 2.2.) * NumIPv6Guards torrc option and consensus parameter. We may need this option if the proposed default doesn't work for some clients. (Section 2.3.) * ConnectionAttemptDelay torrc option and consensus parameter. We will need this option if the Connection Attempt Delay needs to be manually adjusted, for instance, if clients often fail IPv6 connections. (Section 3.3.) * ClientPreferIPv6ORPort consensus parameter. (Section 4.) * IPv4, IPv6, client, relay, and extra Prop306 connection statistics. While optional, these statistics may be useful for debugging and reliability testing, and metrics on IPv4 vs IPv6. (Section 5.) 9. Acknowledgments Thank you so much to teor for your discussion on this happy eyeballs proposal. I wouldn't have been able to do this has it not been for your help. 10. Refrences [P299-TRAC]: https://trac.torproject.org/projects/tor/ticket/29801 [TEOR-P306-REP]: https://lists.torproject.org/pipermail/tor-dev/2019-July/013919.html T -- teor ----------------------------------------------------------------------