commit 502f3f5afe84d7b5ad02f8fc2262232bbd9beb13 Author: David Goulet <dgoulet@torproject.org> Date: Tue Jul 14 11:26:40 2020 -0400 relay: Publish IPv4/IPv6 from resolved address cache When a relay builds a new descriptor, use the new relay_find_addr_to_publish() interface to find the address to publish per family. This commit also make the check for address consistency to also work for a configured IPv6 for which before it was IPv4 only. Related to #40025 Signed-off-by: David Goulet <dgoulet@torproject.org> --- src/feature/relay/router.c | 131 ++++++++++++++++++++++++--------------------- 1 file changed, 71 insertions(+), 60 deletions(-) diff --git a/src/feature/relay/router.c b/src/feature/relay/router.c index 4f4ba8559b..cebc44b1f5 100644 --- a/src/feature/relay/router.c +++ b/src/feature/relay/router.c @@ -1822,54 +1822,55 @@ router_get_descriptor_gen_reason(void) * ORPort or DirPort. * listener_type is either CONN_TYPE_OR_LISTENER or CONN_TYPE_DIR_LISTENER. */ static void -router_check_descriptor_address_port_consistency(uint32_t ipv4h_desc_addr, +router_check_descriptor_address_port_consistency(const tor_addr_t *addr, int listener_type) { + int family, port_cfg; + + tor_assert(addr); tor_assert(listener_type == CONN_TYPE_OR_LISTENER || listener_type == CONN_TYPE_DIR_LISTENER); - /* The first advertised Port may be the magic constant CFG_AUTO_PORT. - */ - int port_v4_cfg = get_first_advertised_port_by_type_af(listener_type, - AF_INET); - if (port_v4_cfg != 0 && - !port_exists_by_type_addr32h_port(listener_type, - ipv4h_desc_addr, port_v4_cfg, 1)) { - const tor_addr_t *port_addr = get_first_advertised_addr_by_type_af( - listener_type, - AF_INET); - /* If we're building a descriptor with no advertised address, - * something is terribly wrong. */ - tor_assert(port_addr); - - tor_addr_t desc_addr; - char port_addr_str[TOR_ADDR_BUF_LEN]; - char desc_addr_str[TOR_ADDR_BUF_LEN]; - - tor_addr_to_str(port_addr_str, port_addr, TOR_ADDR_BUF_LEN, 0); - - tor_addr_from_ipv4h(&desc_addr, ipv4h_desc_addr); - tor_addr_to_str(desc_addr_str, &desc_addr, TOR_ADDR_BUF_LEN, 0); - - const char *listener_str = (listener_type == CONN_TYPE_OR_LISTENER ? - "OR" : "Dir"); - log_warn(LD_CONFIG, "The IPv4 %sPort address %s does not match the " - "descriptor address %s. If you have a static public IPv4 " - "address, use 'Address <IPv4>' and 'OutboundBindAddress " - "<IPv4>'. If you are behind a NAT, use two %sPort lines: " - "'%sPort <PublicPort> NoListen' and '%sPort <InternalPort> " - "NoAdvertise'.", - listener_str, port_addr_str, desc_addr_str, listener_str, - listener_str, listener_str); - } -} - -/* Tor relays only have one IPv4 address in the descriptor, which is derived - * from the Address torrc option, or guessed using various methods in - * router_pick_published_address(). - * Warn the operator if there is no ORPort on the descriptor address - * ipv4h_desc_addr. + family = tor_addr_family(addr); + /* The first advertised Port may be the magic constant CFG_AUTO_PORT. */ + port_cfg = get_first_advertised_port_by_type_af(listener_type, family); + if (port_cfg != 0 && + !port_exists_by_type_addr_port(listener_type, addr, port_cfg, 1)) { + const tor_addr_t *port_addr = + get_first_advertised_addr_by_type_af(listener_type, family); + /* If we're building a descriptor with no advertised address, + * something is terribly wrong. */ + tor_assert(port_addr); + + char port_addr_str[TOR_ADDR_BUF_LEN]; + char desc_addr_str[TOR_ADDR_BUF_LEN]; + + tor_addr_to_str(port_addr_str, port_addr, TOR_ADDR_BUF_LEN, 0); + tor_addr_to_str(desc_addr_str, addr, TOR_ADDR_BUF_LEN, 0); + + const char *listener_str = (listener_type == CONN_TYPE_OR_LISTENER ? + "OR" : "Dir"); + const char *af_str = fmt_af_family(family); + log_warn(LD_CONFIG, "The %s %sPort address %s does not match the " + "descriptor address %s. If you have a static public IPv4 " + "address, use 'Address <%s>' and 'OutboundBindAddress " + "<%s>'. If you are behind a NAT, use two %sPort lines: " + "'%sPort <PublicPort> NoListen' and '%sPort <InternalPort> " + "NoAdvertise'.", + af_str, listener_str, port_addr_str, desc_addr_str, af_str, + af_str, listener_str, listener_str, listener_str); + } +} + +/** Tor relays only have one IPv4 or/and one IPv6 address in the descriptor, + * which is derived from the Address torrc option, or guessed using various + * methods in relay_find_addr_to_publish(). + * + * Warn the operator if there is no ORPort associated with the given address + * in addr. + * * Warn the operator if there is no DirPort on the descriptor address. + * * This catches a few common config errors: * - operators who expect ORPorts and DirPorts to be advertised on the * ports' listen addresses, rather than the torrc Address (or guessed @@ -1878,20 +1879,22 @@ router_check_descriptor_address_port_consistency(uint32_t ipv4h_desc_addr, * addresses; * - discrepancies between guessed addresses and configured listen * addresses (when the Address option isn't set). + * * If a listener is listening on all IPv4 addresses, it is assumed that it * is listening on the configured Address, and no messages are logged. + * * If an operators has specified NoAdvertise ORPorts in a NAT setting, * no messages are logged, unless they have specified other advertised * addresses. + * * The message tells operators to configure an ORPort and DirPort that match - * the Address (using NoListen if needed). - */ + * the Address (using NoListen if needed). */ static void -router_check_descriptor_address_consistency(uint32_t ipv4h_desc_addr) +router_check_descriptor_address_consistency(const tor_addr_t *addr) { - router_check_descriptor_address_port_consistency(ipv4h_desc_addr, + router_check_descriptor_address_port_consistency(addr, CONN_TYPE_OR_LISTENER); - router_check_descriptor_address_port_consistency(ipv4h_desc_addr, + router_check_descriptor_address_port_consistency(addr, CONN_TYPE_DIR_LISTENER); } @@ -2033,7 +2036,7 @@ MOCK_IMPL(STATIC int, router_build_fresh_unsigned_routerinfo,(routerinfo_t **ri_out)) { routerinfo_t *ri = NULL; - uint32_t addr; + tor_addr_t ipv4_addr, ipv6_addr; char platform[256]; int hibernating = we_are_hibernating(); const or_options_t *options = get_options(); @@ -2044,22 +2047,37 @@ router_build_fresh_unsigned_routerinfo,(routerinfo_t **ri_out)) goto err; } - if (router_pick_published_address(options, &addr, 0) < 0) { + /* Find our resolved address both IPv4 and IPv6. In case the address is not + * found, the object is set to an UNSPEC address. */ + bool have_v4 = relay_find_addr_to_publish(options, AF_INET, 0, &ipv4_addr); + bool have_v6 = relay_find_addr_to_publish(options, AF_INET6, 0, &ipv6_addr); + + /* Tor requires a relay to have an IPv4 so bail if we can't find it. */ + if (!have_v4) { log_warn(LD_CONFIG, "Don't know my address while generating descriptor"); result = TOR_ROUTERINFO_ERROR_NO_EXT_ADDR; goto err; } - /* Log a message if the address in the descriptor doesn't match the ORPort * and DirPort addresses configured by the operator. */ - router_check_descriptor_address_consistency(addr); + router_check_descriptor_address_consistency(&ipv4_addr); + router_check_descriptor_address_consistency(&ipv6_addr); ri = tor_malloc_zero(sizeof(routerinfo_t)); ri->cache_info.routerlist_index = -1; ri->nickname = tor_strdup(options->Nickname); - tor_addr_from_ipv4h(&ri->ipv4_addr, addr); - ri->ipv4_orport = router_get_advertised_or_port(options); + + /* IPv4. */ + tor_addr_copy(&ri->ipv4_addr, &ipv4_addr); + ri->ipv4_orport = router_get_advertised_or_port_by_af(options, AF_INET); ri->ipv4_dirport = router_get_advertised_dir_port(options, 0); + + /* IPv6. */ + if (have_v6) { + tor_addr_copy(&ri->ipv6_addr, &ipv6_addr); + ri->ipv6_orport = router_get_advertised_or_port_by_af(options, AF_INET6); + } + ri->supports_tunnelled_dir_requests = directory_permits_begindir_requests(options); ri->cache_info.published_on = time(NULL); @@ -2071,13 +2089,6 @@ router_build_fresh_unsigned_routerinfo,(routerinfo_t **ri_out)) tor_memdup(&get_current_curve25519_keypair()->pubkey, sizeof(curve25519_public_key_t)); - /* For now, at most one IPv6 or-address is being advertised. */ - tor_addr_port_t ipv6_orport; - router_get_advertised_ipv6_or_ap(options, &ipv6_orport); - /* If there is no valid IPv6 ORPort, the address and port are null. */ - tor_addr_copy(&ri->ipv6_addr, &ipv6_orport.addr); - ri->ipv6_orport = ipv6_orport.port; - ri->identity_pkey = crypto_pk_dup_key(get_server_identity_key()); if (BUG(crypto_pk_get_digest(ri->identity_pkey, ri->cache_info.identity_digest) < 0)) {