commit 7550ae4b33ae4bde083e64991d3a942fe0b0cb20 Author: Nick Mathewson nickm@torproject.org Date: Wed Sep 21 14:14:52 2011 -0400
Turn my multiple-orports draft into proposal 186 --- proposals/000-index.txt | 2 + proposals/118-multiple-orports.txt | 2 +- proposals/186-multiple-orports.txt | 263 ++++++++++++++++++++++++++++++ proposals/ideas/xxx-multiple-orports.txt | 263 ------------------------------ 4 files changed, 266 insertions(+), 264 deletions(-)
diff --git a/proposals/000-index.txt b/proposals/000-index.txt index bc25574..de31a92 100644 --- a/proposals/000-index.txt +++ b/proposals/000-index.txt @@ -106,6 +106,7 @@ Proposals by number: 183 Refill Intervals [OPEN] 184 Miscellaneous changes for a v3 Tor link protocol [OPEN] 185 Directory caches without DirPort [OPEN] +186 Multiple addresses for one OR or bridge [DRAFT]
Proposals by status: @@ -119,6 +120,7 @@ Proposals by status: 175 Automatically promoting Tor clients to nodes 179 TLS certificate and parameter normalization [for 0.2.3.x] 182 Credit Bucket + 186 Multiple addresses for one OR or bridge NEEDS-REVISION: 131 Help users to verify they are using Tor NEEDS-RESEARCH: diff --git a/proposals/118-multiple-orports.txt b/proposals/118-multiple-orports.txt index b21f034..69ab382 100644 --- a/proposals/118-multiple-orports.txt +++ b/proposals/118-multiple-orports.txt @@ -3,7 +3,7 @@ Title: Advertising multiple ORPorts at once Author: Nick Mathewson Created: 09-Jul-2007 Status: Superseded -Superseded-By: xxx-multiple-orports.txt +Superseded-By: 186-multiple-orports.txt
[Needs Revision: This proposal needs revision to come up to 2011 standards and take microdescriptors into account.] diff --git a/proposals/186-multiple-orports.txt b/proposals/186-multiple-orports.txt new file mode 100644 index 0000000..5b59c77 --- /dev/null +++ b/proposals/186-multiple-orports.txt @@ -0,0 +1,263 @@ +Filename: 186-multiple-orports.txt +Title: Multiple addresses for one OR or bridge +Author: Nick Mathewson +Created: 19-Sep-2011 +Supersedes: 118 +Status: Draft + +Overview: + + This document is a proposal for servers to advertise multiple + address/port combinations for their ORPort. + + It supersedes proposal 118. + +Motivation: + + Sometimes servers want to support multiple ports for incoming + connections, either in order to support multiple address families + (ie, to add IPv6 support), to better use multiple interfaces, or + to support a variety of FascistFirewallPorts settings. This is + easy to set up now, but there's no way to advertise it to clients. + +Configuring additional addresses and ports: + + In consonance with our changes to the (Socks|Trans|NATD|DNS)Port + options made in 0.2.3.x for proposal 171, I make a corresponding + change to allow multiple SocksPort options and deprecate + SocksListenAddress. + + The new syntax will be: + + "SocksPort" PortDescription Options? + + Options = "NoAdvertise" | "NoListen" | "AllAddrs" | "IPV4Only" + | "IPV6Only" + + PortDescription = PORTLIST | + ADDRESS ":" PORTLIST | + Hostname ":" PORTLIST + + (PORTLIST and ADDRESS are defined below.) + + The 'NoAdvertise' option performs the function of the old + SocksListenAddress option. If it is set, we bind a port, but + don't put it in our descriptor. + + The 'NoListen' option tells Tor to advertise an address, but not + bind to it. The operator needs to use some other mechanism to + ensure that ports are redirected to ports that _are_ listened on. + + The 'AllAddrs' option tells Tor that if no address is given in the + PortDescription part, we should bind/advertise every one of our + publicly visible unicast addresses; and that if a hostname address + is given in the PortDescription, we should bind/advertise every + publicly visible unicast address that the hostname resolves to. + (Q: Should this be on by default?) The 'IPv4Only' and 'IPv6Only' + options tell Tor to interpret such situations as applying only to + IPv4 addresses or to IPv6 addresses. + + As with the client *Port options, only the old format or the new + format are allowed: either a single numeric socksport and zero or + more sockslistenaddress options, or a set of one or more + SocksPorts in the new extended format. + + In current operating systems (unless we get into crazy nonportable + tricks) we need to use one socket for every address:port that Tor + bind on. As a sanity check, we can limit the number of such + sockets we use to, say, 64. If you want to bind lots more + address:port combinations, you'll want to do it at the + firewall/routing level. + + Example: We want to bind on 0.0.0.0:9001 + + SocksPort 9001 + + Example: Our firewall is redirecting ports 80, 443, and 7000-8000 + on all hosts in x.244.2.0/24 onto our port 2929. + + SocksPort 2929 no-advertise + SocksPort x.244.2.0/24:80,443,7000-8000 no-listen + + Example: We have a dynamic DNS provider that maps + tornode.example.com to our current external IPv4 and IPv6 + addresses. Our firewall forwards port 443 on those address to our + port 1337. + + SocksPort 1337 no-advertise alladdrs + SocksPort tornode.example.com:443 no-bind alladdrs + +Self-testing: + + Right now, Tor nodes need to check every port that they advertise + before they declare themselves reachable. If a Tor has + a lot of advertised ports, that could be prohibitive. + Instead, it should try a sample of ports for each address. It should + not advertise any given SocksPort line until it has tried + extending to or connecting to a sample of the address/port + combinations. + + It will now be possible for a Tor node to find that some addresses + work and others do not. In this case, the node should only + advertise socksport lines that have been checked. + + {Until support is added for extend cells to IPv6 addresses, it + will only be possible to test IPv6 addresses by connecting + directly. We might want to just skip self-testing those until we + have IPv6 extend support.} + +New descriptor syntax: + + We add a new line in the router descriptor, "or-address". This line + can occur zero, one, or multiple times. Its format is: + + or-address SP ADDRESS ":" PORTLIST NL + + ADDRESS = IP6ADDR | IP4ADDR + IPV6ADDR = an ipv6 address, surrounded by square brackets. + IPV4ADDR = an ipv4 address, represented as a dotted quad. + PORTLIST = PORTSPEC | PORTSPEC "," PORTLIST + PORTSPEC = PORT | PORT "-" PORT + PORT = a number between 1 and 65535 inclusive. + + [This is the regular format for specifying sets of addresses and + ports in Tor.] + + A descriptor should not include an or-address line that does + nothing but duplicate the address:port pair from its "router" + line. + + A node must not list more than 8 or-address lines. + + (Q: Any reason to allow more than 2? Multiple interfaces, I guess.) + +New authority behavior: + + The same rationale applies as for self-testing. An authority + needs to test the main address:port from the router line, and + every or-address line. For or-address lines that contains + multiple ports, it needs to test all of them if they are few, or a + sample if they are not. + + An authority shouldn't list a node as Running unless every + or-address line it advertises looks like it will work. + +Consensus directories and microdescriptors: + + We introduce a new line type for microdescriptors and consensuses, + "a". Each "a" line has the same format as an or-address line. + The "a" lines (if any) appear immediately after the "r" line for a + router in the consensus, and immediately after the "onion-key" + entry in a microdescriptor. + + Clients that use microdescriptors should consider a node's + addresses to be the address:port listed in the "r" line of a + consensus, plus all "a" lines for that node in the consensus, plus + all "a" lines for that node in the its microdescriptor. Clients + that use full descriptors should consider a node's addresses to be + everything listed in its descriptor. + + We will have to define a new voting algorithm version; when using + this version or later, votes should include a single "a" line for + every relay that has an IPv6 address, to include the first IPv6 + line in its descriptor. (If there are no or-address lines, then + they shouldn't include any "a" lines.) The remaining or-address + lines will turn into "a" lines in the microdescriptor. + + As with other data in the vote derived from the descriptor, + the vote will include whichever set of "a" lines are given by the + most authorities who voted for the descriptor digest that will be + used for the router. + +Directory authorities with more addresses: + + We need a way for a client to configure a TrustedDirServer as + having multiple OR addresses, specifically so that we can give at + least one default authority an IPv6 address for bootstrapping + purposes. + + (Q: Do any of the current authorities have stable IPv6 addresses?) + + We will want to allow the address in a "dir-source" line in a vote + to contain an IPv6 address, and/or allow voters to list themselves + with more addresses in votes/consensuses. But right now, nothing + actually uses the addresses listed for voters in dir-source lines + for anything besides log messages. + +Client behavior: + + I propose that initially we shouldn't change client behavior too + much here. + + (Q: Is there any advantage to having a client choose a random + address? If so we can do it later. If not, why list any more + than one IPv4 and one IPv6 address?) + + Tor clients not running with bridges, and running with IPv4 + support, should still use the address and ORPort as advertised in + the router or r line of the appropriate directory object. + + Tor clients not running with bridges, and running without IPv4 + support, should use the first listed IPv6 address for a node, + using the lowest-numbered listed port for that address. They + should only connect to nodes with an IPv6 address. + + Clients should accept Bridge lines with IPv6 addresses, and + address:port sets, in addition to the lines they currently accept. + + Clients, for now, should only use the address:port from the router + line when making EXTEND cells; see below. + +Nodes without IPv4 addresses: + + Currently Tor requires every node or bridge to have an IPv4 + address. We will want to maintain this property for the + foreseeable future, but we should define how a node without an IPv4 + address would advertise itself. + + Right now, there's no way to do that: if anything but an IPv4 + address appears in a router line of a routerdesc, or the "r" line of + a consensus, then it won't parse. If something that looks like an + IPv4 address appears there, clients will (I believe) try to + connect to it. + + We can make this work, though: let's allow nodes to list themselves + with a magic IPv4 address (say, 127.1.1.1) if they have + or-address entries containing only IPv6 address. We could give + these nodes a new flag other than Running to indicate that they're + up, and not give them the Running flag. That way, old clients + would never try to use them, but new clients could know to treat + the new flag as indicating that the node is running, and know not + to connect to a node listed with address 127.1.1.1. + +Interaction with EXTEND and NETINFO: + + Currently, EXTEND cells only support IPv4 addresses, so we should + use only those. There is a proposal draft to support more address + types. + + A server's NETINFO cells must list all configured addresses for a + server. + +Why not extend DirPort this way too? + + Because clients are all using BEGINDIR these days. + + That is, clients tunnel their directory requests inside OR + connections, and don't generally connect to DirPorts at all. + +Why not have address ranges? + + Earlier drafts of this proposal suggested that clients should + provide not only ranges of ports, but also ranges of addresses, + specified with bitmasks. That's a neat idea for circumvention, + but if we did that, you wouldn't want to advertise publicly that + you have an entire address range. + +Coding impact: + + In addition to the obvious changes, we need to audit everything + that looks up or compares OR connections and nodes by address:port + under the assumptions that each node has only a single address or + ORPort. + diff --git a/proposals/ideas/xxx-multiple-orports.txt b/proposals/ideas/xxx-multiple-orports.txt deleted file mode 100644 index 4d5b7fb..0000000 --- a/proposals/ideas/xxx-multiple-orports.txt +++ /dev/null @@ -1,263 +0,0 @@ -Filename: xxx-multiple-orports.txt -Title: Multiple addresses for one OR or bridge -Author: Nick Mathewson -Created: 19-Sep-2011 -Supersedes: 118 -Status: Draft - -Overview: - - This document is a proposal for servers to advertise multiple - address/port combinations for their ORPort. - - It supersedes proposal 118. - -Motivation: - - Sometimes servers want to support multiple ports for incoming - connections, either in order to support multiple address families - (ie, to add IPv6 support), to better use multiple interfaces, or - to support a variety of FascistFirewallPorts settings. This is - easy to set up now, but there's no way to advertise it to clients. - -Configuring additional addresses and ports: - - In consonance with our changes to the (Socks|Trans|NATD|DNS)Port - options made in 0.2.3.x for proposal 171, I make a corresponding - change to allow multiple SocksPort options and deprecate - SocksListenAddress. - - The new syntax will be: - - "SocksPort" PortDescription Options? - - Options = "NoAdvertise" | "NoListen" | "AllAddrs" | "IPV4Only" - | "IPV6Only" - - PortDescription = PORTLIST | - ADDRESS ":" PORTLIST | - Hostname ":" PORTLIST - - (PORTLIST and ADDRESS are defined below.) - - The 'NoAdvertise' option performs the function of the old - SocksListenAddress option. If it is set, we bind a port, but - don't put it in our descriptor. - - The 'NoListen' option tells Tor to advertise an address, but not - bind to it. The operator needs to use some other mechanism to - ensure that ports are redirected to ports that _are_ listened on. - - The 'AllAddrs' option tells Tor that if no address is given in the - PortDescription part, we should bind/advertise every one of our - publicly visible unicast addresses; and that if a hostname address - is given in the PortDescription, we should bind/advertise every - publicly visible unicast address that the hostname resolves to. - (Q: Should this be on by default?) The 'IPv4Only' and 'IPv6Only' - options tell Tor to interpret such situations as applying only to - IPv4 addresses or to IPv6 addresses. - - As with the client *Port options, only the old format or the new - format are allowed: either a single numeric socksport and zero or - more sockslistenaddress options, or a set of one or more - SocksPorts in the new extended format. - - In current operating systems (unless we get into crazy nonportable - tricks) we need to use one socket for every address:port that Tor - bind on. As a sanity check, we can limit the number of such - sockets we use to, say, 64. If you want to bind lots more - address:port combinations, you'll want to do it at the - firewall/routing level. - - Example: We want to bind on 0.0.0.0:9001 - - SocksPort 9001 - - Example: Our firewall is redirecting ports 80, 443, and 7000-8000 - on all hosts in x.244.2.0/24 onto our port 2929. - - SocksPort 2929 no-advertise - SocksPort x.244.2.0/24:80,443,7000-8000 no-listen - - Example: We have a dynamic DNS provider that maps - tornode.example.com to our current external IPv4 and IPv6 - addresses. Our firewall forwards port 443 on those address to our - port 1337. - - SocksPort 1337 no-advertise alladdrs - SocksPort tornode.example.com:443 no-bind alladdrs - -Self-testing: - - Right now, Tor nodes need to check every port that they advertise - before they declare themselves reachable. If a Tor has - a lot of advertised ports, that could be prohibitive. - Instead, it should try a sample of ports for each address. It should - not advertise any given SocksPort line until it has tried - extending to or connecting to a sample of the address/port - combinations. - - It will now be possible for a Tor node to find that some addresses - work and others do not. In this case, the node should only - advertise socksport lines that have been checked. - - {Until support is added for extend cells to IPv6 addresses, it - will only be possible to test IPv6 addresses by connecting - directly. We might want to just skip self-testing those until we - have IPv6 extend support.} - -New descriptor syntax: - - We add a new line in the router descriptor, "or-address". This line - can occur zero, one, or multiple times. Its format is: - - or-address SP ADDRESS ":" PORTLIST NL - - ADDRESS = IP6ADDR | IP4ADDR - IPV6ADDR = an ipv6 address, surrounded by square brackets. - IPV4ADDR = an ipv4 address, represented as a dotted quad. - PORTLIST = PORTSPEC | PORTSPEC "," PORTLIST - PORTSPEC = PORT | PORT "-" PORT - PORT = a number between 1 and 65535 inclusive. - - [This is the regular format for specifying sets of addresses and - ports in Tor.] - - A descriptor should not include an or-address line that does - nothing but duplicate the address:port pair from its "router" - line. - - A node must not list more than 8 or-address lines. - - (Q: Any reason to allow more than 2? Multiple interfaces, I guess.) - -New authority behavior: - - The same rationale applies as for self-testing. An authority - needs to test the main address:port from the router line, and - every or-address line. For or-address lines that contains - multiple ports, it needs to test all of them if they are few, or a - sample if they are not. - - An authority shouldn't list a node as Running unless every - or-address line it advertises looks like it will work. - -Consensus directories and microdescriptors: - - We introduce a new line type for microdescriptors and consensuses, - "a". Each "a" line has the same format as an or-address line. - The "a" lines (if any) appear immediately after the "r" line for a - router in the consensus, and immediately after the "onion-key" - entry in a microdescriptor. - - Clients that use microdescriptors should consider a node's - addresses to be the address:port listed in the "r" line of a - consensus, plus all "a" lines for that node in the consensus, plus - all "a" lines for that node in the its microdescriptor. Clients - that use full descriptors should consider a node's addresses to be - everything listed in its descriptor. - - We will have to define a new voting algorithm version; when using - this version or later, votes should include a single "a" line for - every relay that has an IPv6 address, to include the first IPv6 - line in its descriptor. (If there are no or-address lines, then - they shouldn't include any "a" lines.) The remaining or-address - lines will turn into "a" lines in the microdescriptor. - - As with other data in the vote derived from the descriptor, - the vote will include whichever set of "a" lines are given by the - most authorities who voted for the descriptor digest that will be - used for the router. - -Directory authorities with more addresses: - - We need a way for a client to configure a TrustedDirServer as - having multiple OR addresses, specifically so that we can give at - least one default authority an IPv6 address for bootstrapping - purposes. - - (Q: Do any of the current authorities have stable IPv6 addresses?) - - We will want to allow the address in a "dir-source" line in a vote - to contain an IPv6 address, and/or allow voters to list themselves - with more addresses in votes/consensuses. But right now, nothing - actually uses the addresses listed for voters in dir-source lines - for anything besides log messages. - -Client behavior: - - I propose that initially we shouldn't change client behavior too - much here. - - (Q: Is there any advantage to having a client choose a random - address? If so we can do it later. If not, why list any more - than one IPv4 and one IPv6 address?) - - Tor clients not running with bridges, and running with IPv4 - support, should still use the address and ORPort as advertised in - the router or r line of the appropriate directory object. - - Tor clients not running with bridges, and running without IPv4 - support, should use the first listed IPv6 address for a node, - using the lowest-numbered listed port for that address. They - should only connect to nodes with an IPv6 address. - - Clients should accept Bridge lines with IPv6 addresses, and - address:port sets, in addition to the lines they currently accept. - - Clients, for now, should only use the address:port from the router - line when making EXTEND cells; see below. - -Nodes without IPv4 addresses: - - Currently Tor requires every node or bridge to have an IPv4 - address. We will want to maintain this property for the - foreseeable future, but we should define how a node without an IPv4 - address would advertise itself. - - Right now, there's no way to do that: if anything but an IPv4 - address appears in a router line of a routerdesc, or the "r" line of - a consensus, then it won't parse. If something that looks like an - IPv4 address appears there, clients will (I believe) try to - connect to it. - - We can make this work, though: let's allow nodes to list themselves - with a magic IPv4 address (say, 127.1.1.1) if they have - or-address entries containing only IPv6 address. We could give - these nodes a new flag other than Running to indicate that they're - up, and not give them the Running flag. That way, old clients - would never try to use them, but new clients could know to treat - the new flag as indicating that the node is running, and know not - to connect to a node listed with address 127.1.1.1. - -Interaction with EXTEND and NETINFO: - - Currently, EXTEND cells only support IPv4 addresses, so we should - use only those. There is a proposal draft to support more address - types. - - A server's NETINFO cells must list all configured addresses for a - server. - -Why not extend DirPort this way too? - - Because clients are all using BEGINDIR these days. - - That is, clients tunnel their directory requests inside OR - connections, and don't generally connect to DirPorts at all. - -Why not have address ranges? - - Earlier drafts of this proposal suggested that clients should - provide not only ranges of ports, but also ranges of addresses, - specified with bitmasks. That's a neat idea for circumvention, - but if we did that, you wouldn't want to advertise publicly that - you have an entire address range. - -Coding impact: - - In addition to the obvious changes, we need to audit everything - that looks up or compares OR connections and nodes by address:port - under the assumptions that each node has only a single address or - ORPort. -