commit 9f9b12f1f60c6576cc944116f3e715268f296c26 Author: teor teor2345@gmail.com Date: Mon Jul 6 16:18:24 2015 +1000
Create Exit and Non-Exit Authority and Bridge Authority Templates
Refactor existing templates to avoid duplication.
This makes flagging each exit for performance testing much easier. --- torrc_templates/authority-exit.tmpl | 2 ++ torrc_templates/authority.i | 40 +++++++++++++++++++++++++++ torrc_templates/authority.tmpl | 43 +---------------------------- torrc_templates/bridgeauthority-exit.tmpl | 2 ++ torrc_templates/bridgeauthority.i | 3 ++ torrc_templates/bridgeauthority.tmpl | 6 +--- 6 files changed, 49 insertions(+), 47 deletions(-)
diff --git a/torrc_templates/authority-exit.tmpl b/torrc_templates/authority-exit.tmpl new file mode 100644 index 0000000..6826845 --- /dev/null +++ b/torrc_templates/authority-exit.tmpl @@ -0,0 +1,2 @@ +${include:relay.tmpl} +${include:authority.i} diff --git a/torrc_templates/authority.i b/torrc_templates/authority.i new file mode 100644 index 0000000..378c154 --- /dev/null +++ b/torrc_templates/authority.i @@ -0,0 +1,40 @@ +AuthoritativeDirectory 1 +V3AuthoritativeDirectory 1 +ContactInfo auth${nodenum}@test.test + +# Speed up the consensus cycle as fast as it will go +# Voting Interval can be: +# 10, 12, 15, 18, 20, 24, 25, 30, 36, 40, 45, 50, 60, ... +# Testing Initial Voting Interval can be: +# 5, 6, 8, 9, or any of the possible values for Voting Interval, +# as they both need to evenly divide 30 minutes. +# If clock desynchronisation is an issue, use an interval of at least: +# 18 * drift in seconds, to allow for a clock slop factor +TestingV3AuthInitialVotingInterval 5 +V3AuthVotingInterval 10 +# VoteDelay + DistDelay must be less than VotingInterval +TestingV3AuthInitialVoteDelay 2 +V3AuthVoteDelay 2 +TestingV3AuthInitialDistDelay 2 +V3AuthDistDelay 2 +# This is autoconfigured by chutney, so you probably don't want to use it +#TestingV3AuthVotingStartOffset 0 + +# Work around situations where the Exit, Guard and HSDir flags aren't being set +# These flags are all set eventually, but it takes Guard up to ~30 minutes +# We could be more precise here, but it's easiest just to vote everything +# Clients are sensible enough to filter out Exits without any exit ports, +# and Guards and HSDirs without ORPorts +# If your tor doesn't recognise TestingDirAuthVoteExit/HSDir, +# either update your chutney to a 2015 version, +# or update your tor to a later version, most likely 0.2.6.2-final + +# These are all set in common.i in the Comprehensive/Rapid sections +# Work around Exit requirements +#TestingDirAuthVoteExit * +# Work around bandwidth thresholds for exits +#TestingMinExitFlagThreshold 0 +# Work around Guard uptime requirements +#TestingDirAuthVoteGuard * +# Work around HSDir uptime and ORPort connectivity requirements +#TestingDirAuthVoteHSDir * diff --git a/torrc_templates/authority.tmpl b/torrc_templates/authority.tmpl index 4c36222..11164d4 100644 --- a/torrc_templates/authority.tmpl +++ b/torrc_templates/authority.tmpl @@ -1,43 +1,2 @@ ${include:relay-non-exit.tmpl} - -AuthoritativeDirectory 1 -V3AuthoritativeDirectory 1 -ContactInfo auth${nodenum}@test.test -ExitPolicy reject *:* - -# Speed up the consensus cycle as fast as it will go -# Voting Interval can be: -# 10, 12, 15, 18, 20, 24, 25, 30, 36, 40, 45, 50, 60, ... -# Testing Initial Voting Interval can be: -# 5, 6, 8, 9, or any of the possible values for Voting Interval, -# as they both need to evenly divide 30 minutes. -# If clock desynchronisation is an issue, use an interval of at least: -# 18 * drift in seconds, to allow for a clock slop factor -TestingV3AuthInitialVotingInterval 5 -V3AuthVotingInterval 10 -# VoteDelay + DistDelay must be less than VotingInterval -TestingV3AuthInitialVoteDelay 2 -V3AuthVoteDelay 2 -TestingV3AuthInitialDistDelay 2 -V3AuthDistDelay 2 -# This is autoconfigured by chutney, so you probably don't want to use it -#TestingV3AuthVotingStartOffset 0 - -# Work around situations where the Exit, Guard and HSDir flags aren't being set -# These flags are all set eventually, but it takes Guard up to ~30 minutes -# We could be more precise here, but it's easiest just to vote everything -# Clients are sensible enough to filter out Exits without any exit ports, -# and Guards and HSDirs without ORPorts -# If your tor doesn't recognise TestingDirAuthVoteExit/HSDir, -# either update your chutney to a 2015 version, -# or update your tor to a later version, most likely 0.2.6.2-final - -# These are all set in common.i in the Comprehensive/Rapid sections -# Work around Exit requirements -#TestingDirAuthVoteExit * -# Work around bandwidth thresholds for exits -#TestingMinExitFlagThreshold 0 -# Work around Guard uptime requirements -#TestingDirAuthVoteGuard * -# Work around HSDir uptime and ORPort connectivity requirements -#TestingDirAuthVoteHSDir * +${include:authority.i} diff --git a/torrc_templates/bridgeauthority-exit.tmpl b/torrc_templates/bridgeauthority-exit.tmpl new file mode 100644 index 0000000..5837657 --- /dev/null +++ b/torrc_templates/bridgeauthority-exit.tmpl @@ -0,0 +1,2 @@ +${include:relay.tmpl} +${include:bridgeauthority.i} diff --git a/torrc_templates/bridgeauthority.i b/torrc_templates/bridgeauthority.i new file mode 100644 index 0000000..4c47f47 --- /dev/null +++ b/torrc_templates/bridgeauthority.i @@ -0,0 +1,3 @@ +AuthoritativeDirectory 1 +BridgeAuthoritativeDir 1 +ContactInfo bridgeauth${nodenum}@test.test diff --git a/torrc_templates/bridgeauthority.tmpl b/torrc_templates/bridgeauthority.tmpl index 04fd2b5..678c6fb 100644 --- a/torrc_templates/bridgeauthority.tmpl +++ b/torrc_templates/bridgeauthority.tmpl @@ -1,6 +1,2 @@ ${include:relay-non-exit.tmpl} -AuthoritativeDirectory 1 -ContactInfo bridgeauth${nodenum}@test.test -ExitPolicy reject *:* - -BridgeAuthoritativeDir 1 +${include:bridgeauthority.i}