commit fa8c98985b35cf2d0330038b8a1d455838d76af9 Author: David Goulet dgoulet@torproject.org Date: Wed Nov 22 11:17:21 2017 -0500
test: Add outbound channel cell test
Signed-off-by: David Goulet dgoulet@torproject.org --- src/test/test_channel.c | 144 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+)
diff --git a/src/test/test_channel.c b/src/test/test_channel.c index 008c31b6b..fce2b3eec 100644 --- a/src/test/test_channel.c +++ b/src/test/test_channel.c @@ -6,8 +6,10 @@ #include "or.h" #include "channel.h" /* For channel_note_destroy_not_pending */ +#define CIRCUITLIST_PRIVATE #include "circuitlist.h" #include "circuitmux.h" +#include "circuitmux_ewma.h" /* For var_cell_free */ #include "connection_or.h" /* For packed_cell stuff */ @@ -546,6 +548,146 @@ test_channel_dumpstats(void *arg) return; }
+/* Test outbound cell. The callstack is: + * channel_flush_some_cells() + * -> channel_flush_from_first_active_circuit() + * -> channel_write_packed_cell() + * -> write_packed_cell() + * -> chan->write_packed_cell() fct ptr. + * + * This test goes from a cell in a circuit up to the channel write handler + * that should put them on the connection outbuf. */ +static void +test_channel_outbound_cell(void *arg) +{ + int old_count; + channel_t *chan = NULL; + packed_cell_t *p_cell = NULL, *p_cell2 = NULL; + origin_circuit_t *circ = NULL; + cell_queue_t *queue; + + (void) arg; + + /* The channel will be freed so we need to hijack this so the scheduler + * doesn't get confused. */ + MOCK(scheduler_release_channel, scheduler_release_channel_mock); + + /* Accept cells to lower layer */ + test_chan_accept_cells = 1; + /* Use default overhead factor */ + test_overhead_estimate = 1.0; + + /* Setup a valid circuit to queue a cell. */ + circ = origin_circuit_new(); + tt_assert(circ); + /* Circuit needs an origin purpose to be considered origin. */ + TO_CIRCUIT(circ)->purpose = CIRCUIT_PURPOSE_C_GENERAL; + TO_CIRCUIT(circ)->n_circ_id = 42; + /* This is the outbound test so use the next channel queue. */ + queue = &TO_CIRCUIT(circ)->n_chan_cells; + /* Setup packed cell to queue on the circuit. */ + p_cell = packed_cell_new(); + tt_assert(p_cell); + p_cell2 = packed_cell_new(); + tt_assert(p_cell2); + /* Setup a channel to put the circuit on. */ + chan = new_fake_channel(); + tt_assert(chan); + chan->state = CHANNEL_STATE_OPENING; + channel_change_state_open(chan); + /* Outbound channel. */ + channel_mark_outgoing(chan); + /* Try to register it so we can clean it through the channel cleanup + * process. */ + channel_register(chan); + tt_int_op(chan->registered, OP_EQ, 1); + /* Set EWMA policy so we can pick it when flushing. */ + channel_set_cmux_policy_everywhere(&ewma_policy); + tt_ptr_op(circuitmux_get_policy(chan->cmux), OP_EQ, &ewma_policy); + + /* Register circuit to the channel circid map which will attach the circuit + * to the channel's cmux as well. */ + circuit_set_n_circid_chan(TO_CIRCUIT(circ), 42, chan); + tt_int_op(channel_num_circuits(chan), OP_EQ, 1); + tt_assert(!TO_CIRCUIT(circ)->next_active_on_n_chan); + tt_assert(!TO_CIRCUIT(circ)->prev_active_on_n_chan); + /* Test the cmux state. */ + tt_ptr_op(TO_CIRCUIT(circ)->n_mux, OP_EQ, chan->cmux); + tt_int_op(circuitmux_is_circuit_attached(chan->cmux, TO_CIRCUIT(circ)), + OP_EQ, 1); + + /* Flush the channel without any cell on it. */ + old_count = test_cells_written; + ssize_t flushed = channel_flush_some_cells(chan, 1); + tt_i64_op(flushed, OP_EQ, 0); + tt_int_op(test_cells_written, OP_EQ, old_count); + tt_int_op(channel_more_to_flush(chan), OP_EQ, 0); + tt_int_op(circuitmux_num_active_circuits(chan->cmux), OP_EQ, 0); + tt_int_op(circuitmux_num_cells(chan->cmux), OP_EQ, 0); + tt_int_op(circuitmux_is_circuit_active(chan->cmux, TO_CIRCUIT(circ)), + OP_EQ, 0); + tt_u64_op(chan->n_cells_xmitted, OP_EQ, 0); + tt_u64_op(chan->n_bytes_xmitted, OP_EQ, 0); + + /* Queue cell onto the next queue that is the outbound direction. Than + * update its cmux so the circuit can be picked when flushing cells. */ + cell_queue_append(queue, p_cell); + p_cell = NULL; + tt_int_op(queue->n, OP_EQ, 1); + cell_queue_append(queue, p_cell2); + p_cell2 = NULL; + tt_int_op(queue->n, OP_EQ, 2); + + update_circuit_on_cmux(TO_CIRCUIT(circ), CELL_DIRECTION_OUT); + tt_int_op(circuitmux_num_active_circuits(chan->cmux), OP_EQ, 1); + tt_int_op(circuitmux_num_cells(chan->cmux), OP_EQ, 2); + tt_int_op(circuitmux_is_circuit_active(chan->cmux, TO_CIRCUIT(circ)), + OP_EQ, 1); + + /* From this point on, we have a queued cell on an active circuit attached + * to the channel's cmux. */ + + /* Flush the first cell. This is going to go down the call stack. */ + old_count = test_cells_written; + flushed = channel_flush_some_cells(chan, 1); + tt_i64_op(flushed, OP_EQ, 1); + tt_int_op(test_cells_written, OP_EQ, old_count + 1); + tt_int_op(circuitmux_num_cells(chan->cmux), OP_EQ, 1); + tt_int_op(channel_more_to_flush(chan), OP_EQ, 1); + /* Circuit should remain active because there is a second cell queued. */ + tt_int_op(circuitmux_is_circuit_active(chan->cmux, TO_CIRCUIT(circ)), + OP_EQ, 1); + /* Should still be attached. */ + tt_int_op(circuitmux_is_circuit_attached(chan->cmux, TO_CIRCUIT(circ)), + OP_EQ, 1); + tt_u64_op(chan->n_cells_xmitted, OP_EQ, 1); + tt_u64_op(chan->n_bytes_xmitted, OP_EQ, get_cell_network_size(0)); + + /* Flush second cell. This is going to go down the call stack. */ + old_count = test_cells_written; + flushed = channel_flush_some_cells(chan, 1); + tt_i64_op(flushed, OP_EQ, 1); + tt_int_op(test_cells_written, OP_EQ, old_count + 1); + tt_int_op(circuitmux_num_cells(chan->cmux), OP_EQ, 0); + tt_int_op(channel_more_to_flush(chan), OP_EQ, 0); + /* No more cells should make the circuit inactive. */ + tt_int_op(circuitmux_is_circuit_active(chan->cmux, TO_CIRCUIT(circ)), + OP_EQ, 0); + /* Should still be attached. */ + tt_int_op(circuitmux_is_circuit_attached(chan->cmux, TO_CIRCUIT(circ)), + OP_EQ, 1); + tt_u64_op(chan->n_cells_xmitted, OP_EQ, 2); + tt_u64_op(chan->n_bytes_xmitted, OP_EQ, get_cell_network_size(0) * 2); + + done: + if (circ) { + circuit_free(TO_CIRCUIT(circ)); + } + tor_free(p_cell); + channel_free_all(); + UNMOCK(scheduler_release_channel); +} + /* Test inbound cell. The callstack is: * channel_process_cell() * -> chan->cell_handler() @@ -1016,6 +1158,8 @@ test_channel_id_map(void *arg) struct testcase_t channel_tests[] = { { "inbound_cell", test_channel_inbound_cell, TT_FORK, NULL, NULL }, + { "outbound_cell", test_channel_outbound_cell, TT_FORK, + NULL, NULL }, { "id_map", test_channel_id_map, TT_FORK, NULL, NULL },