commit ec52c8ed69da64a105f7f9dc7abfa59a3943ec64 Author: Swati Thacker swati.kgp13@gmail.com Date: Fri Dec 27 00:22:54 2019 +0530
manpage: alphabetize client options
Alphabetize client options in tor.1.txt. Closes ticket32846. --- changes/ticket32846 | 3 + doc/tor.1.txt | 1168 ++++++++++++++++++++++++++------------------------- 2 files changed, 593 insertions(+), 578 deletions(-)
diff --git a/changes/ticket32846 b/changes/ticket32846 new file mode 100644 index 000000000..5022c6145 --- /dev/null +++ b/changes/ticket32846 @@ -0,0 +1,3 @@ + o Documentation (manpage): + - Alphabetize the Client Options section of the tor manpage. + Closes ticket 32846. diff --git a/doc/tor.1.txt b/doc/tor.1.txt index e1738c9ba..c843112d0 100644 --- a/doc/tor.1.txt +++ b/doc/tor.1.txt @@ -954,10 +954,30 @@ forward slash (/) in the configuration file and on the command line.
== CLIENT OPTIONS
+// These options are in alphabetical order, with exceptions as noted. +// Please keep them that way! + The following options are useful only for clients (that is, if **SocksPort**, **HTTPTunnelPort**, **TransPort**, **DNSPort**, or **NATDPort** is non-zero):
+[[AllowNonRFC953Hostnames]] **AllowNonRFC953Hostnames** **0**|**1**:: + When this option is disabled, Tor blocks hostnames containing illegal + characters (like @ and :) rather than sending them to an exit node to be + resolved. This helps trap accidental attempts to resolve URLs and so on. + (Default: 0) + +[[AutomapHostsOnResolve]] **AutomapHostsOnResolve** **0**|**1**:: + When this option is enabled, and we get a request to resolve an address + that ends with one of the suffixes in **AutomapHostsSuffixes**, we map an + unused virtual address to that address, and return the new virtual address. + This is handy for making ".onion" addresses work with applications that + resolve an address and then connect to it. (Default: 0) + +[[AutomapHostsSuffixes]] **AutomapHostsSuffixes** __SUFFIX__,__SUFFIX__,__...__:: + A comma-separated list of suffixes to use with **AutomapHostsOnResolve**. + The "." suffix is equivalent to "all addresses." (Default: .exit,.onion). + [[Bridge]] **Bridge** [__transport__] __IP__:__ORPort__ [__fingerprint__]:: When set along with UseBridges, instructs Tor to use the relay at "IP:ORPort" as a "bridge" relaying into the Tor network. If "fingerprint" @@ -978,6 +998,7 @@ The following options are useful only for clients (that is, if the documentation of the pluggable transport for details of what arguments it supports.
+// Out of order because it logically belongs before the CircuitBuildTimeout option [[LearnCircuitBuildTimeout]] **LearnCircuitBuildTimeout** **0**|**1**:: If 0, CircuitBuildTimeout adaptive learning is disabled. (Default: 1)
@@ -989,6 +1010,14 @@ The following options are useful only for clients (that is, if LearnCircuitBuildTimeout is 0, this value is the only value used. (Default: 60 seconds)
+[[CircuitPadding]] **CircuitPadding** **0**|**1**:: + If set to 0, Tor will not pad client circuits with additional cover + traffic. Only clients may set this option. This option should be offered + via the UI to mobile users for use where bandwidth may be expensive. If + set to 1, padding will be negotiated as per the consensus and relay + support (unlike ConnectionPadding, CircuitPadding cannot be force-enabled). + (Default: 1) + [[CircuitsAvailableTimeout]] **CircuitsAvailableTimeout** __NUM__:: Tor will attempt to keep at least one open, unused circuit available for this amount of time. This option governs how long idle circuits are kept @@ -1005,6 +1034,58 @@ The following options are useful only for clients (that is, if If your network is particularly slow, you might want to set this to a number like 60. (Default: 0)
+[[ClientAutoIPv6ORPort]] **ClientAutoIPv6ORPort** **0**|**1**:: + If this option is set to 1, Tor clients randomly prefer a node's IPv4 or + IPv6 ORPort. The random preference is set every time a node is loaded + from a new consensus or bridge config. When this option is set to 1, + **ClientPreferIPv6ORPort** is ignored. (Default: 0) + +[[ClientBootstrapConsensusAuthorityDownloadInitialDelay]] **ClientBootstrapConsensusAuthorityDownloadInitialDelay** __N__:: + Initial delay in seconds for when clients should download consensuses from authorities + if they are bootstrapping (that is, they don't have a usable, reasonably + live consensus). Only used by clients fetching from a list of fallback + directory mirrors. This schedule is advanced by (potentially concurrent) + connection attempts, unlike other schedules, which are advanced by + connection failures. (Default: 6) + +[[ClientBootstrapConsensusAuthorityOnlyDownloadInitialDelay]] **ClientBootstrapConsensusAuthorityOnlyDownloadInitialDelay** __N__:: + Initial delay in seconds for when clients should download consensuses from authorities + if they are bootstrapping (that is, they don't have a usable, reasonably + live consensus). Only used by clients which don't have or won't fetch + from a list of fallback directory mirrors. This schedule is advanced by + (potentially concurrent) connection attempts, unlike other schedules, + which are advanced by connection failures. (Default: 0) + +[[ClientBootstrapConsensusFallbackDownloadInitialDelay]] **ClientBootstrapConsensusFallbackDownloadInitialDelay** __N__:: + Initial delay in seconds for when clients should download consensuses from fallback + directory mirrors if they are bootstrapping (that is, they don't have a + usable, reasonably live consensus). Only used by clients fetching from a + list of fallback directory mirrors. This schedule is advanced by + (potentially concurrent) connection attempts, unlike other schedules, + which are advanced by connection failures. (Default: 0) + +[[ClientBootstrapConsensusMaxInProgressTries]] **ClientBootstrapConsensusMaxInProgressTries** __NUM__:: + Try this many simultaneous connections to download a consensus before + waiting for one to complete, timeout, or error out. (Default: 3) + +[[ClientDNSRejectInternalAddresses]] **ClientDNSRejectInternalAddresses** **0**|**1**:: + If true, Tor does not believe any anonymously retrieved DNS answer that + tells it that an address resolves to an internal address (like 127.0.0.1 or + 192.168.0.1). This option prevents certain browser-based attacks; it + is not allowed to be set on the default network. (Default: 1) + +[[ClientOnionAuthDir]] **ClientOnionAuthDir** __path__:: + Path to the directory containing v3 hidden service authorization files. + Each file is for a single onion address, and the files MUST have the suffix + ".auth_private" (i.e. "bob_onion.auth_private"). The content format MUST be: + + + <onion-address>:descriptor:x25519:<base32-encoded-privkey> + + + The <onion-address> MUST NOT have the ".onion" suffix. The + <base32-encoded-privkey> is the base32 representation of the raw key bytes + only (32 bytes for x25519). See Appendix G in the rend-spec-v3.txt file of + https://spec.torproject.org/%5Btorspec] for more information. + [[ClientOnly]] **ClientOnly** **0**|**1**:: If set to 1, Tor will not run as a relay or serve directory requests, even if the ORPort, ExtORPort, or DirPort options are @@ -1014,6 +1095,43 @@ The following options are useful only for clients (that is, if and fast enough. The current behavior is simply that Tor is a client unless ORPort, ExtORPort, or DirPort are configured.) (Default: 0)
+[[ClientPreferIPv6DirPort]] **ClientPreferIPv6DirPort** **0**|**1**|**auto**:: + If this option is set to 1, Tor prefers a directory port with an IPv6 + address over one with IPv4, for direct connections, if a given directory + server has both. (Tor also prefers an IPv6 DirPort if IPv4Client is set to + 0.) If this option is set to auto, clients prefer IPv4. Other things may + influence the choice. This option breaks a tie to the favor of IPv6. + (Default: auto) (DEPRECATED: This option has had no effect for some + time.) + +[[ClientPreferIPv6ORPort]] **ClientPreferIPv6ORPort** **0**|**1**|**auto**:: + If this option is set to 1, Tor prefers an OR port with an IPv6 + address over one with IPv4 if a given entry node has both. (Tor also + prefers an IPv6 ORPort if IPv4Client is set to 0.) If this option is set + to auto, Tor bridge clients prefer the configured bridge address, and + other clients prefer IPv4. Other things may influence the choice. This + option breaks a tie to the favor of IPv6. (Default: auto) + +[[ClientRejectInternalAddresses]] **ClientRejectInternalAddresses** **0**|**1**:: + If true, Tor does not try to fulfill requests to connect to an internal + address (like 127.0.0.1 or 192.168.0.1) __unless an exit node is + specifically requested__ (for example, via a .exit hostname, or a + controller request). If true, multicast DNS hostnames for machines on the + local network (of the form *.local) are also rejected. (Default: 1) + +[[ClientUseIPv4]] **ClientUseIPv4** **0**|**1**:: + If this option is set to 0, Tor will avoid connecting to directory servers + and entry nodes over IPv4. Note that clients with an IPv4 + address in a **Bridge**, proxy, or pluggable transport line will try + connecting over IPv4 even if **ClientUseIPv4** is set to 0. (Default: 1) + +[[ClientUseIPv6]] **ClientUseIPv6** **0**|**1**:: + If this option is set to 1, Tor might connect to directory servers or + entry nodes over IPv6. For IPv6 only hosts, you need to also set + **ClientUseIPv4** to 0 to disable IPv4. Note that clients configured with + an IPv6 address in a **Bridge**, proxy, or pluggable transportline will + try connecting over IPv6 even if **ClientUseIPv6** is set to 0. (Default: 0) + [[ConnectionPadding]] **ConnectionPadding** **0**|**1**|**auto**:: This option governs Tor's use of padding to defend against some forms of traffic analysis. If it is set to 'auto', Tor will send padding only @@ -1024,25 +1142,74 @@ The following options are useful only for clients (that is, if for use where bandwidth may be expensive. (Default: auto)
-[[ReducedConnectionPadding]] **ReducedConnectionPadding** **0**|**1**:: - If set to 1, Tor will not not hold OR connections open for very long, - and will send less padding on these connections. Only clients may set - this option. This option should be offered via the UI to mobile users - for use where bandwidth may be expensive. (Default: 0) +[[DNSPort]] **DNSPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: + If non-zero, open this port to listen for UDP DNS requests, and resolve + them anonymously. This port only handles A, AAAA, and PTR requests---it + doesn't handle arbitrary DNS request types. Set the port to "auto" to + have Tor pick a port for + you. This directive can be specified multiple times to bind to multiple + addresses/ports. See SocksPort for an explanation of isolation + flags. (Default: 0)
-[[CircuitPadding]] **CircuitPadding** **0**|**1**:: - If set to 0, Tor will not pad client circuits with additional cover - traffic. Only clients may set this option. This option should be offered - via the UI to mobile users for use where bandwidth may be expensive. If - set to 1, padding will be negotiated as per the consensus and relay - support (unlike ConnectionPadding, CircuitPadding cannot be force-enabled). - (Default: 1) +[[DormantCanceledByStartup]] **DormantCanceledByStartup** **0**|**1**:: + By default, Tor starts in active mode if it was active the last time + it was shut down, and in dormant mode if it was dormant. But if + this option is true, Tor treats every startup event as user + activity, and Tor will never start in Dormant mode, even if it has + been unused for a long time on previous runs. (Default: 0) + + + Note: Packagers and application developers should change the value of + this option only with great caution: it has the potential to + create spurious traffic on the network. This option should only + be used if Tor is started by an affirmative user activity (like + clicking on an applcation or running a command), and not if Tor + is launched for some other reason (for example, by a startup + process, or by an application that launches itself on every login.)
-[[ReducedCircuitPadding]] **ReducedCircuitPadding** **0**|**1**:: - If set to 1, Tor will only use circuit padding algorithms that have low - overhead. Only clients may set this option. This option should be offered - via the UI to mobile users for use where bandwidth may be expensive. - (Default: 0) +[[DormantClientTimeout]] **DormantClientTimeout** __N__ **minutes**|**hours**|**days**|**weeks**:: + If Tor spends this much time without any client activity, + enter a dormant state where automatic circuits are not built, and + directory information is not fetched. + Does not affect servers or onion services. Must be at least 10 minutes. + (Default: 24 hours) + +[[DormantOnFirstStartup]] **DormantOnFirstStartup** **0**|**1**:: + If true, then the first time Tor starts up with a fresh DataDirectory, + it starts in dormant mode, and takes no actions until the user has made + a request. (This mode is recommended if installing a Tor client for a + user who might not actually use it.) If false, Tor bootstraps the first + time it is started, whether it sees a user request or not. + + + After the first time Tor starts, it begins in dormant mode if it was + dormant before, and not otherwise. (Default: 0) + +[[DormantTimeoutDisabledByIdleStreams]] **DormantTimeoutDisabledByIdleStreams** **0**|**1**:: + If true, then any open client stream (even one not reading or writing) + counts as client activity for the purpose of DormantClientTimeout. + If false, then only network activity counts. (Default: 1) + +[[DownloadExtraInfo]] **DownloadExtraInfo** **0**|**1**:: + If true, Tor downloads and caches "extra-info" documents. These documents + contain information about servers other than the information in their + regular server descriptors. Tor does not use this information for anything + itself; to save bandwidth, leave this option turned off. (Default: 0) + +[[EnforceDistinctSubnets]] **EnforceDistinctSubnets** **0**|**1**:: + If 1, Tor will not put two servers whose IP addresses are "too close" on + the same circuit. Currently, two addresses are "too close" if they lie in + the same /16 range. (Default: 1) + +[[EntryNodes]] **EntryNodes** __node__,__node__,__...__:: + A list of identity fingerprints and country codes of nodes + to use for the first hop in your normal circuits. + Normal circuits include all + circuits except for direct connections to directory servers. The Bridge + option overrides this option; if you have configured bridges and + UseBridges is 1, the Bridges are used as your entry nodes. + + + + The ExcludeNodes option overrides this option: any node listed in both + EntryNodes and ExcludeNodes is treated as excluded. See + the **ExcludeNodes** option for more information on how to specify nodes.
[[ExcludeNodes]] **ExcludeNodes** __node__,__node__,__...__:: A list of identity fingerprints, country codes, and address @@ -1068,7 +1235,7 @@ The following options are useful only for clients (that is, if country can't be identified. No country code, including {??}, works if no GeoIPFile can be loaded. See also the GeoIPExcludeUnknown option below.
- +// Out of order because it logically belongs after the ExcludeNodes option [[ExcludeExitNodes]] **ExcludeExitNodes** __node__,__node__,__...__:: A list of identity fingerprints, country codes, and address patterns of nodes to never use when picking an exit node---that is, a @@ -1078,14 +1245,6 @@ The following options are useful only for clients (that is, if the **ExcludeNodes** option for more information on how to specify nodes. See also the caveats on the "ExitNodes" option below.
-[[GeoIPExcludeUnknown]] **GeoIPExcludeUnknown** **0**|**1**|**auto**:: - If this option is set to 'auto', then whenever any country code is set in - ExcludeNodes or ExcludeExitNodes, all nodes with unknown country ({??} and - possibly {A1}) are treated as excluded as well. If this option is set to - '1', then all unknown countries are treated as excluded in ExcludeNodes - and ExcludeExitNodes. This option has no effect when a GeoIP file isn't - configured or can't be found. (Default: auto) - [[ExitNodes]] **ExitNodes** __node__,__node__,__...__:: A list of identity fingerprints, country codes, and address patterns of nodes to use as exit node---that is, a @@ -1110,51 +1269,6 @@ The following options are useful only for clients (that is, if The .exit address notation, if enabled via MapAddress, overrides this option.
-[[MiddleNodes]] **MiddleNodes** __node__,__node__,__...__:: - A list of identity fingerprints and country codes of nodes - to use for "middle" hops in your normal circuits. - Normal circuits include all circuits except for direct connections - to directory servers. Middle hops are all hops other than exit and entry. + -+ - This is an **experimental** feature that is meant to be used by researchers - and developers to test new features in the Tor network safely. Using it - without care will strongly influence your anonymity. This feature might get - removed in the future. -+ - The HSLayer2Node and HSLayer3Node options override this option for onion - service circuits, if they are set. The vanguards addon will read this - option, and if set, it will set HSLayer2Nodes and HSLayer3Nodes to nodes - from this set. -+ - The ExcludeNodes option overrides this option: any node listed in both - MiddleNodes and ExcludeNodes is treated as excluded. See - the **ExcludeNodes** option for more information on how to specify nodes. - -[[EntryNodes]] **EntryNodes** __node__,__node__,__...__:: - A list of identity fingerprints and country codes of nodes - to use for the first hop in your normal circuits. - Normal circuits include all - circuits except for direct connections to directory servers. The Bridge - option overrides this option; if you have configured bridges and - UseBridges is 1, the Bridges are used as your entry nodes. + - + - The ExcludeNodes option overrides this option: any node listed in both - EntryNodes and ExcludeNodes is treated as excluded. See - the **ExcludeNodes** option for more information on how to specify nodes. - -[[StrictNodes]] **StrictNodes** **0**|**1**:: - If StrictNodes is set to 1, Tor will treat solely the ExcludeNodes option - as a requirement to follow for all the circuits you generate, even if - doing so will break functionality for you (StrictNodes does not apply to - ExcludeExitNodes, ExitNodes, MiddleNodes, or MapAddress). If StrictNodes - is set to 0, Tor will still try to avoid nodes in the ExcludeNodes list, - but it will err on the side of avoiding unexpected errors. - Specifically, StrictNodes 0 tells Tor that it is okay to use an excluded - node when it is *necessary* to perform relay reachability self-tests, - connect to a hidden service, provide a hidden service to a client, - fulfill a .exit request, upload directory information, or download - directory information. (Default: 0) - [[FascistFirewall]] **FascistFirewall** **0**|**1**:: If 1, Tor will only create outgoing connections to ORs running on ports that your firewall allows (defaults to 80 and 443; see **FirewallPorts**). @@ -1168,35 +1282,13 @@ The following options are useful only for clients (that is, if **FascistFirewall** is set. This option is deprecated; use ReachableAddresses instead. (Default: 80, 443)
-[[ReachableAddresses]] **ReachableAddresses** __IP__[/__MASK__][:__PORT__]...:: - A comma-separated list of IP addresses and ports that your firewall allows - you to connect to. The format is as for the addresses in ExitPolicy, except - that "accept" is understood unless "reject" is explicitly provided. For - example, 'ReachableAddresses 99.0.0.0/8, reject 18.0.0.0/8:80, accept - *:80' means that your firewall allows connections to everything inside net - 99, rejects port 80 connections to net 18, and accepts connections to port - 80 otherwise. (Default: 'accept *:*'.) - -[[ReachableDirAddresses]] **ReachableDirAddresses** __IP__[/__MASK__][:__PORT__]...:: - Like **ReachableAddresses**, a list of addresses and ports. Tor will obey - these restrictions when fetching directory information, using standard HTTP - GET requests. If not set explicitly then the value of - **ReachableAddresses** is used. If **HTTPProxy** is set then these - connections will go through that proxy. (DEPRECATED: This option has - had no effect for some time.) - -[[ReachableORAddresses]] **ReachableORAddresses** __IP__[/__MASK__][:__PORT__]...:: - Like **ReachableAddresses**, a list of addresses and ports. Tor will obey - these restrictions when connecting to Onion Routers, using TLS/SSL. If not - set explicitly then the value of **ReachableAddresses** is used. If - **HTTPSProxy** is set then these connections will go through that proxy. + - + - The separation between **ReachableORAddresses** and - **ReachableDirAddresses** is only interesting when you are connecting - through proxies (see **HTTPProxy** and **HTTPSProxy**). Most proxies limit - TLS connections (which Tor uses to connect to Onion Routers) to port 443, - and some limit HTTP GET requests (which Tor uses for fetching directory - information) to port 80. +[[GeoIPExcludeUnknown]] **GeoIPExcludeUnknown** **0**|**1**|**auto**:: + If this option is set to 'auto', then whenever any country code is set in + ExcludeNodes or ExcludeExitNodes, all nodes with unknown country ({??} and + possibly {A1}) are treated as excluded as well. If this option is set to + '1', then all unknown countries are treated as excluded in ExcludeNodes + and ExcludeExitNodes. This option has no effect when a GeoIP file isn't + configured or can't be found. (Default: auto)
[[HidServAuth]] **HidServAuth** __onion-address__ __auth-cookie__ [__service-name__]:: Client authorization for a v2 hidden service. Valid onion addresses contain 16 @@ -1208,17 +1300,125 @@ The following options are useful only for clients (that is, if services can be configured to require authorization using the **HiddenServiceAuthorizeClient** option.
-[[ClientOnionAuthDir]] **ClientOnionAuthDir** __path__:: - Path to the directory containing v3 hidden service authorization files. - Each file is for a single onion address, and the files MUST have the suffix - ".auth_private" (i.e. "bob_onion.auth_private"). The content format MUST be: +[[HSLayer2Nodes]] **HSLayer2Nodes** __node__,__node__,__...__:: + A list of identity fingerprints, nicknames, country codes, and + address patterns of nodes that are allowed to be used as the + second hop in all client or service-side Onion Service circuits. + This option mitigates attacks where the adversary runs middle nodes + and induces your client or service to create many circuits, in order + to discover your primary guard node. + (Default: Any node in the network may be used in the second hop.) + - <onion-address>:descriptor:x25519:<base32-encoded-privkey> + (Example: + HSLayer2Nodes ABCD1234CDEF5678ABCD1234CDEF5678ABCD1234, {cc}, 255.254.0.0/8) + + - The <onion-address> MUST NOT have the ".onion" suffix. The - <base32-encoded-privkey> is the base32 representation of the raw key bytes - only (32 bytes for x25519). See Appendix G in the rend-spec-v3.txt file of - https://spec.torproject.org/%5Btorspec] for more information. + When this is set, the resulting hidden service paths will + look like: + + + C - G - L2 - M - Rend + + C - G - L2 - M - HSDir + + C - G - L2 - M - Intro + + S - G - L2 - M - Rend + + S - G - L2 - M - HSDir + + S - G - L2 - M - Intro + + + + where C is this client, S is the service, G is the Guard node, + L2 is a node from this option, and M is a random middle node. + Rend, HSDir, and Intro point selection is not affected by this + option. + + + This option may be combined with HSLayer3Nodes to create + paths of the form: + + + C - G - L2 - L3 - Rend + + C - G - L2 - L3 - M - HSDir + + C - G - L2 - L3 - M - Intro + + S - G - L2 - L3 - M - Rend + + S - G - L2 - L3 - HSDir + + S - G - L2 - L3 - Intro + + + + ExcludeNodes have higher priority than HSLayer2Nodes, + which means that nodes specified in ExcludeNodes will not be + picked. + + + When either this option or HSLayer3Nodes are set, the /16 subnet + and node family restrictions are removed for hidden service + circuits. Additionally, we allow the guard node to be present + as the Rend, HSDir, and IP node, and as the hop before it. This + is done to prevent the adversary from inferring information + about our guard, layer2, and layer3 node choices at later points + in the path. + + + This option is meant to be managed by a Tor controller such as + https://github.com/mikeperry-tor/vanguards that selects and + updates this set of nodes for you. Hence it does not do load + balancing if fewer than 20 nodes are selected, and if no nodes in + HSLayer2Nodes are currently available for use, Tor will not work. + Please use extreme care if you are setting this option manually. + +[[HSLayer3Nodes]] **HSLayer3Nodes** __node__,__node__,__...__:: + A list of identity fingerprints, nicknames, country codes, and + address patterns of nodes that are allowed to be used as the + third hop in all client and service-side Onion Service circuits. + This option mitigates attacks where the adversary runs middle nodes + and induces your client or service to create many circuits, in order + to discover your primary or Layer2 guard nodes. + (Default: Any node in the network may be used in the third hop.) + + + (Example: + HSLayer3Nodes ABCD1234CDEF5678ABCD1234CDEF5678ABCD1234, {cc}, 255.254.0.0/8) + + + + When this is set by itself, the resulting hidden service paths + will look like: + + C - G - M - L3 - Rend + + C - G - M - L3 - M - HSDir + + C - G - M - L3 - M - Intro + + S - G - M - L3 - M - Rend + + S - G - M - L3 - HSDir + + S - G - M - L3 - Intro + + where C is this client, S is the service, G is the Guard node, + L2 is a node from this option, and M is a random middle node. + Rend, HSDir, and Intro point selection is not affected by this + option. + + + While it is possible to use this option by itself, it should be + combined with HSLayer2Nodes to create paths of the form: + + + C - G - L2 - L3 - Rend + + C - G - L2 - L3 - M - HSDir + + C - G - L2 - L3 - M - Intro + + S - G - L2 - L3 - M - Rend + + S - G - L2 - L3 - HSDir + + S - G - L2 - L3 - Intro + + + + ExcludeNodes have higher priority than HSLayer3Nodes, + which means that nodes specified in ExcludeNodes will not be + picked. + + + When either this option or HSLayer2Nodes are set, the /16 subnet + and node family restrictions are removed for hidden service + circuits. Additionally, we allow the guard node to be present + as the Rend, HSDir, and IP node, and as the hop before it. This + is done to prevent the adversary from inferring information + about our guard, layer2, and layer3 node choices at later points + in the path. + + + This option is meant to be managed by a Tor controller such as + https://github.com/mikeperry-tor/vanguards that selects and + updates this set of nodes for you. Hence it does not do load + balancing if fewer than 20 nodes are selected, and if no nodes in + HSLayer3Nodes are currently available for use, Tor will not work. + Please use extreme care if you are setting this option manually. + +[[HTTPTunnelPort]] **HTTPTunnelPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: + Open this port to listen for proxy connections using the "HTTP CONNECT" + protocol instead of SOCKS. Set this to + 0 if you don't want to allow "HTTP CONNECT" connections. Set the port + to "auto" to have Tor pick a port for you. This directive can be + specified multiple times to bind to multiple addresses/ports. If multiple + entries of this option are present in your configuration file, Tor will + perform stream isolation between listeners by default. See + SOCKSPort for an explanation of isolation flags. (Default: 0)
[[LongLivedPorts]] **LongLivedPorts** __PORTS__:: A list of ports for services that tend to have long-running connections @@ -1281,10 +1481,6 @@ The following options are useful only for clients (that is, if for the original address. You can use a wildcard mapping to handle redirects within the same site.
-[[NewCircuitPeriod]] **NewCircuitPeriod** __NUM__:: - Every NUM seconds consider whether to build a new circuit. (Default: 30 - seconds) - [[MaxCircuitDirtiness]] **MaxCircuitDirtiness** __NUM__:: Feel free to reuse a circuit that was first used at most NUM seconds ago, but never attach a new stream to a circuit that is too old. For hidden @@ -1299,6 +1495,42 @@ The following options are useful only for clients (that is, if client streams. A circuit is pending if we have begun constructing it, but it has not yet been completely constructed. (Default: 32)
+[[MiddleNodes]] **MiddleNodes** __node__,__node__,__...__:: + A list of identity fingerprints and country codes of nodes + to use for "middle" hops in your normal circuits. + Normal circuits include all circuits except for direct connections + to directory servers. Middle hops are all hops other than exit and entry. + ++ + This is an **experimental** feature that is meant to be used by researchers + and developers to test new features in the Tor network safely. Using it + without care will strongly influence your anonymity. This feature might get + removed in the future. ++ + The HSLayer2Node and HSLayer3Node options override this option for onion + service circuits, if they are set. The vanguards addon will read this + option, and if set, it will set HSLayer2Nodes and HSLayer3Nodes to nodes + from this set. ++ + The ExcludeNodes option overrides this option: any node listed in both + MiddleNodes and ExcludeNodes is treated as excluded. See + the **ExcludeNodes** option for more information on how to specify nodes. + +[[NATDPort]] **NATDPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: + Open this port to listen for connections from old versions of ipfw (as + included in old versions of FreeBSD, etc) using the NATD protocol. + Use 0 if you don't want to allow NATD connections. Set the port + to "auto" to have Tor pick a port for you. This directive can be + specified multiple times to bind to multiple addresses/ports. If multiple + entries of this option are present in your configuration file, Tor will + perform stream isolation between listeners by default. See + SocksPort for an explanation of isolation flags. + + + + This option is only for people who cannot use TransPort. (Default: 0) + +[[NewCircuitPeriod]] **NewCircuitPeriod** __NUM__:: + Every NUM seconds consider whether to build a new circuit. (Default: 30 + seconds) + [[NodeFamily]] **NodeFamily** __node__,__node__,__...__:: The Tor servers, defined by their identity fingerprints, constitute a "family" of similar or co-administered servers, so never use @@ -1309,36 +1541,168 @@ The following options are useful only for clients (that is, if codes in {curly braces}. See the **ExcludeNodes** option for more information on how to specify nodes.
-[[EnforceDistinctSubnets]] **EnforceDistinctSubnets** **0**|**1**:: - If 1, Tor will not put two servers whose IP addresses are "too close" on - the same circuit. Currently, two addresses are "too close" if they lie in - the same /16 range. (Default: 1) +[[OptimisticData]] **OptimisticData** **0**|**1**|**auto**:: + When this option is set, and Tor is using an exit node that supports + the feature, it will try optimistically to send data to the exit node + without waiting for the exit node to report whether the connection + succeeded. This can save a round-trip time for protocols like HTTP + where the client talks first. If OptimisticData is set to **auto**, + Tor will look at the UseOptimisticData parameter in the networkstatus. + (Default: auto)
-[[SocksPort]] **SocksPort** ['address'**:**]{empty}__port__|**unix:**__path__|**auto** [_flags_] [_isolation flags_]:: - Open this port to listen for connections from SOCKS-speaking - applications. Set this to 0 if you don't want to allow application - connections via SOCKS. Set it to "auto" to have Tor pick a port for - you. This directive can be specified multiple times to bind - to multiple addresses/ports. If a unix domain socket is used, you may - quote the path using standard C escape sequences. - (Default: 9050) + +// These are out of order because they logically belong together +[[PathBiasCircThreshold]] **PathBiasCircThreshold** __NUM__ + + +[[PathBiasDropGuards]] **PathBiasDropGuards** __NUM__ + + +[[PathBiasExtremeRate]] **PathBiasExtremeRate** __NUM__ + + +[[PathBiasNoticeRate]] **PathBiasNoticeRate** __NUM__ + + +[[PathBiasWarnRate]] **PathBiasWarnRate** __NUM__ + + +[[PathBiasScaleThreshold]] **PathBiasScaleThreshold** __NUM__:: + These options override the default behavior of Tor's (**currently + experimental**) path bias detection algorithm. To try to find broken or + misbehaving guard nodes, Tor looks for nodes where more than a certain + fraction of circuits through that guard fail to get built. + + - NOTE: Although this option allows you to specify an IP address - other than localhost, you should do so only with extreme caution. - The SOCKS protocol is unencrypted and (as we use it) - unauthenticated, so exposing it in this way could leak your - information to anybody watching your network, and allow anybody - to use your computer as an open proxy. + + The PathBiasCircThreshold option controls how many circuits we need to build + through a guard before we make these checks. The PathBiasNoticeRate, + PathBiasWarnRate and PathBiasExtremeRate options control what fraction of + circuits must succeed through a guard so we won't write log messages. + If less than PathBiasExtremeRate circuits succeed *and* PathBiasDropGuards + is set to 1, we disable use of that guard. + + - If multiple entries of this option are present in your configuration - file, Tor will perform stream isolation between listeners by default. - The _isolation flags_ arguments give Tor rules for which streams - received on this SocksPort are allowed to share circuits with one - another. Recognized isolation flags are: - **IsolateClientAddr**;; - Don't share circuits with streams from a different - client address. (On by default and strongly recommended when - supported; you can disable it with **NoIsolateClientAddr**. + When we have seen more than PathBiasScaleThreshold + circuits through a guard, we scale our observations by 0.5 (governed by + the consensus) so that new observations don't get swamped by old ones. + + + + By default, or if a negative value is provided for one of these options, + Tor uses reasonable defaults from the networkstatus consensus document. + If no defaults are available there, these options default to 150, .70, + .50, .30, 0, and 300 respectively. + +// These are out of order because they logically belong together +[[PathBiasUseThreshold]] **PathBiasUseThreshold** __NUM__ + + +[[PathBiasNoticeUseRate]] **PathBiasNoticeUseRate** __NUM__ + + +[[PathBiasExtremeUseRate]] **PathBiasExtremeUseRate** __NUM__ + + +[[PathBiasScaleUseThreshold]] **PathBiasScaleUseThreshold** __NUM__:: + Similar to the above options, these options override the default behavior + of Tor's (**currently experimental**) path use bias detection algorithm. + + + + Where as the path bias parameters govern thresholds for successfully + building circuits, these four path use bias parameters govern thresholds + only for circuit usage. Circuits which receive no stream usage + are not counted by this detection algorithm. A used circuit is considered + successful if it is capable of carrying streams or otherwise receiving + well-formed responses to RELAY cells. + + + + By default, or if a negative value is provided for one of these options, + Tor uses reasonable defaults from the networkstatus consensus document. + If no defaults are available there, these options default to 20, .80, + .60, and 100, respectively. + +[[PathsNeededToBuildCircuits]] **PathsNeededToBuildCircuits** __NUM__:: + Tor clients don't build circuits for user traffic until they know + about enough of the network so that they could potentially construct + enough of the possible paths through the network. If this option + is set to a fraction between 0.25 and 0.95, Tor won't build circuits + until it has enough descriptors or microdescriptors to construct + that fraction of possible paths. Note that setting this option too low + can make your Tor client less anonymous, and setting it too high can + prevent your Tor client from bootstrapping. If this option is negative, + Tor will use a default value chosen by the directory authorities. If the + directory authorities do not choose a value, Tor will default to 0.6. + (Default: -1) + +[[ReachableAddresses]] **ReachableAddresses** __IP__[/__MASK__][:__PORT__]...:: + A comma-separated list of IP addresses and ports that your firewall allows + you to connect to. The format is as for the addresses in ExitPolicy, except + that "accept" is understood unless "reject" is explicitly provided. For + example, 'ReachableAddresses 99.0.0.0/8, reject 18.0.0.0/8:80, accept + *:80' means that your firewall allows connections to everything inside net + 99, rejects port 80 connections to net 18, and accepts connections to port + 80 otherwise. (Default: 'accept *:*'.) + +[[ReachableDirAddresses]] **ReachableDirAddresses** __IP__[/__MASK__][:__PORT__]...:: + Like **ReachableAddresses**, a list of addresses and ports. Tor will obey + these restrictions when fetching directory information, using standard HTTP + GET requests. If not set explicitly then the value of + **ReachableAddresses** is used. If **HTTPProxy** is set then these + connections will go through that proxy. (DEPRECATED: This option has + had no effect for some time.) + +[[ReachableORAddresses]] **ReachableORAddresses** __IP__[/__MASK__][:__PORT__]...:: + Like **ReachableAddresses**, a list of addresses and ports. Tor will obey + these restrictions when connecting to Onion Routers, using TLS/SSL. If not + set explicitly then the value of **ReachableAddresses** is used. If + **HTTPSProxy** is set then these connections will go through that proxy. + + + + The separation between **ReachableORAddresses** and + **ReachableDirAddresses** is only interesting when you are connecting + through proxies (see **HTTPProxy** and **HTTPSProxy**). Most proxies limit + TLS connections (which Tor uses to connect to Onion Routers) to port 443, + and some limit HTTP GET requests (which Tor uses for fetching directory + information) to port 80. + +[[ReducedCircuitPadding]] **ReducedCircuitPadding** **0**|**1**:: + If set to 1, Tor will only use circuit padding algorithms that have low + overhead. Only clients may set this option. This option should be offered + via the UI to mobile users for use where bandwidth may be expensive. + (Default: 0) + +[[ReducedConnectionPadding]] **ReducedConnectionPadding** **0**|**1**:: + If set to 1, Tor will not not hold OR connections open for very long, + and will send less padding on these connections. Only clients may set + this option. This option should be offered via the UI to mobile users + for use where bandwidth may be expensive. (Default: 0) + +[[RejectPlaintextPorts]] **RejectPlaintextPorts** __port__,__port__,__...__:: + Like WarnPlaintextPorts, but instead of warning about risky port uses, Tor + will instead refuse to make the connection. (Default: None) + +[[SafeSocks]] **SafeSocks** **0**|**1**:: + When this option is enabled, Tor will reject application connections that + use unsafe variants of the socks protocol -- ones that only provide an IP + address, meaning the application is doing a DNS resolve first. + Specifically, these are socks4 and socks5 when not doing remote DNS. + (Default: 0) + +[[SocksPolicy]] **SocksPolicy** __policy__,__policy__,__...__:: + Set an entrance policy for this server, to limit who can connect to the + SocksPort and DNSPort ports. The policies have the same form as exit + policies below, except that port specifiers are ignored. Any address + not matched by some entry in the policy is accepted. + +[[SocksPort]] **SocksPort** ['address'**:**]{empty}__port__|**unix:**__path__|**auto** [_flags_] [_isolation flags_]:: + Open this port to listen for connections from SOCKS-speaking + applications. Set this to 0 if you don't want to allow application + connections via SOCKS. Set it to "auto" to have Tor pick a port for + you. This directive can be specified multiple times to bind + to multiple addresses/ports. If a unix domain socket is used, you may + quote the path using standard C escape sequences. + (Default: 9050) + + + + NOTE: Although this option allows you to specify an IP address + other than localhost, you should do so only with extreme caution. + The SOCKS protocol is unencrypted and (as we use it) + unauthenticated, so exposing it in this way could leak your + information to anybody watching your network, and allow anybody + to use your computer as an open proxy. + + + + If multiple entries of this option are present in your configuration + file, Tor will perform stream isolation between listeners by default. + The _isolation flags_ arguments give Tor rules for which streams + received on this SocksPort are allowed to share circuits with one + another. Recognized isolation flags are: + **IsolateClientAddr**;; + Don't share circuits with streams from a different + client address. (On by default and strongly recommended when + supported; you can disable it with **NoIsolateClientAddr**. Unsupported and force-disabled when using Unix domain sockets.) **IsolateSOCKSAuth**;; Don't share circuits with streams for which different @@ -1482,17 +1846,31 @@ The following options are useful only for clients (that is, if line is used, and all earlier flags are ignored. No error is issued for conflicting flags.
-[[SocksPolicy]] **SocksPolicy** __policy__,__policy__,__...__:: - Set an entrance policy for this server, to limit who can connect to the - SocksPort and DNSPort ports. The policies have the same form as exit - policies below, except that port specifiers are ignored. Any address - not matched by some entry in the policy is accepted. - [[SocksTimeout]] **SocksTimeout** __NUM__:: Let a socks connection wait NUM seconds handshaking, and NUM seconds unattached waiting for an appropriate circuit, before we fail it. (Default: 2 minutes)
+[[StrictNodes]] **StrictNodes** **0**|**1**:: + If StrictNodes is set to 1, Tor will treat solely the ExcludeNodes option + as a requirement to follow for all the circuits you generate, even if + doing so will break functionality for you (StrictNodes does not apply to + ExcludeExitNodes, ExitNodes, MiddleNodes, or MapAddress). If StrictNodes + is set to 0, Tor will still try to avoid nodes in the ExcludeNodes list, + but it will err on the side of avoiding unexpected errors. + Specifically, StrictNodes 0 tells Tor that it is okay to use an excluded + node when it is *necessary* to perform relay reachability self-tests, + connect to a hidden service, provide a hidden service to a client, + fulfill a .exit request, upload directory information, or download + directory information. (Default: 0) + +[[TestSocks]] **TestSocks** **0**|**1**:: + When this option is enabled, Tor will make a notice-level log entry for + each connection to the Socks port indicating whether the request used a + safe socks protocol or an unsafe one (see above entry on SafeSocks). This + helps to determine whether an application using Tor is possibly leaking + DNS requests. (Default: 0) + [[TokenBucketRefillInterval]] **TokenBucketRefillInterval** __NUM__ [**msec**|**second**]:: Set the refill delay interval of Tor's token bucket to NUM milliseconds. NUM must be between 1 and 1000, inclusive. When Tor is out of bandwidth, @@ -1520,6 +1898,44 @@ The following options are useful only for clients (that is, if association between host and exit server after NUM seconds. The default is 1800 seconds (30 minutes).
+[[TransPort]] **TransPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: + Open this port to listen for transparent proxy connections. Set this to + 0 if you don't want to allow transparent proxy connections. Set the port + to "auto" to have Tor pick a port for you. This directive can be + specified multiple times to bind to multiple addresses/ports. If multiple + entries of this option are present in your configuration file, Tor will + perform stream isolation between listeners by default. See + SOCKSPort for an explanation of isolation flags. + + + + TransPort requires OS support for transparent proxies, such as BSDs' pf or + Linux's IPTables. If you're planning to use Tor as a transparent proxy for + a network, you'll want to examine and change VirtualAddrNetwork from the + default setting. (Default: 0) + +[[TransProxyType]] **TransProxyType** **default**|**TPROXY**|**ipfw**|**pf-divert**:: + TransProxyType may only be enabled when there is transparent proxy listener + enabled. + + + + Set this to "TPROXY" if you wish to be able to use the TPROXY Linux module + to transparently proxy connections that are configured using the TransPort + option. Detailed information on how to configure the TPROXY + feature can be found in the Linux kernel source tree in the file + Documentation/networking/tproxy.txt. + + + + Set this option to "ipfw" to use the FreeBSD ipfw interface. + + + + On *BSD operating systems when using pf, set this to "pf-divert" to take + advantage of +divert-to+ rules, which do not modify the packets like + +rdr-to+ rules do. Detailed information on how to configure pf to use + +divert-to+ rules can be found in the pf.conf(5) manual page. On OpenBSD, + +divert-to+ is available to use on versions greater than or equal to + OpenBSD 4.4. + + + + Set this to "default", or leave it unconfigured, to use regular IPTables + on Linux, or to use pf +rdr-to+ rules on *BSD systems. + + + + (Default: "default") + [[UpdateBridgesFromAuthority]] **UpdateBridgesFromAuthority** **0**|**1**:: When set (along with UseBridges), Tor will try to fetch bridge descriptors from the configured bridge authorities when feasible. It will fall back to @@ -1538,6 +1954,7 @@ The following options are useful only for clients (that is, if Authorities or Single Onion Services. In these cases, this option is ignored. (Default: 1)
+//Out of order because it logically belongs with the UseGuardFraction option [[GuardfractionFile]] **GuardfractionFile** __FILENAME__:: V3 authoritative directories only. Configures the location of the guardfraction file which contains information about how long relays @@ -1549,12 +1966,27 @@ The following options are useful only for clients (that is, if selection. If it's set to 'auto', clients will do what the UseGuardFraction consensus parameter tells them to do. (Default: auto)
+//Out of order because it logically belongs after the UseEntryGuards option +[[GuardLifetime]] **GuardLifetime** __N__ **days**|**weeks**|**months**:: + If UseEntryGuards is set, minimum time to keep a guard on our guard list + before picking a new one. If less than one day, we use defaults from the + consensus directory. (Default: 0) + +//Out of order because it logically belongs after the UseEntryGuards option +[[NumDirectoryGuards]] **NumDirectoryGuards** __NUM__:: + If UseEntryGuards is set to 1, we try to make sure we have at least NUM + routers to use as directory guards. If this option is set to 0, use the + value from the guard-n-primary-dir-guards-to-use consensus parameter, and + default to 3 if the consensus parameter isn't set. (Default: 0) + +//Out of order because it logically belongs after the UseEntryGuards option [[NumEntryGuards]] **NumEntryGuards** __NUM__:: If UseEntryGuards is set to 1, we will try to pick a total of NUM routers as long-term entries for our circuits. If NUM is 0, we try to learn the number from the guard-n-primary-guards-to-use consensus parameter, and default to 1 if the consensus parameter isn't set. (Default: 0)
+//Out of order because it logically belongs after the UseEntryGuards option [[NumPrimaryGuards]] **NumPrimaryGuards** __NUM__:: If UseEntryGuards is set to 1, we will try to pick NUM routers for our primary guard list, which is the set of routers we strongly prefer when @@ -1562,30 +1994,13 @@ The following options are useful only for clients (that is, if the guard-n-primary-guards consensus parameter, and default to 3 if the consensus parameter isn't set. (Default: 0)
-[[NumDirectoryGuards]] **NumDirectoryGuards** __NUM__:: - If UseEntryGuards is set to 1, we try to make sure we have at least NUM - routers to use as directory guards. If this option is set to 0, use the - value from the guard-n-primary-dir-guards-to-use consensus parameter, and - default to 3 if the consensus parameter isn't set. (Default: 0) - -[[GuardLifetime]] **GuardLifetime** __N__ **days**|**weeks**|**months**:: - If UseEntryGuards is set, minimum time to keep a guard on our guard list - before picking a new one. If less than one day, we use defaults from the - consensus directory. (Default: 0) - -[[SafeSocks]] **SafeSocks** **0**|**1**:: - When this option is enabled, Tor will reject application connections that - use unsafe variants of the socks protocol -- ones that only provide an IP - address, meaning the application is doing a DNS resolve first. - Specifically, these are socks4 and socks5 when not doing remote DNS. - (Default: 0) - -[[TestSocks]] **TestSocks** **0**|**1**:: - When this option is enabled, Tor will make a notice-level log entry for - each connection to the Socks port indicating whether the request used a - safe socks protocol or an unsafe one (see above entry on SafeSocks). This - helps to determine whether an application using Tor is possibly leaking - DNS requests. (Default: 0) +[[UseMicrodescriptors]] **UseMicrodescriptors** **0**|**1**|**auto**:: + Microdescriptors are a smaller version of the information that Tor needs + in order to build its circuits. Using microdescriptors makes Tor clients + download less directory information, thus saving bandwidth. Directory + caches need to fetch regular descriptors and microdescriptors, so this + option doesn't save any bandwidth for them. For legacy reasons, auto is + accepted, but it has the same effect as 1. (Default: auto)
[[VirtualAddrNetworkIPv4]] **VirtualAddrNetworkIPv4** __IPv4Address__/__bits__ +
@@ -1606,415 +2021,12 @@ The following options are useful only for clients (that is, if used IP. For local use, no change to the default VirtualAddrNetwork setting is needed.
-[[AllowNonRFC953Hostnames]] **AllowNonRFC953Hostnames** **0**|**1**:: - When this option is disabled, Tor blocks hostnames containing illegal - characters (like @ and :) rather than sending them to an exit node to be - resolved. This helps trap accidental attempts to resolve URLs and so on. - (Default: 0) - -[[HTTPTunnelPort]] **HTTPTunnelPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: - Open this port to listen for proxy connections using the "HTTP CONNECT" - protocol instead of SOCKS. Set this to - 0 if you don't want to allow "HTTP CONNECT" connections. Set the port - to "auto" to have Tor pick a port for you. This directive can be - specified multiple times to bind to multiple addresses/ports. If multiple - entries of this option are present in your configuration file, Tor will - perform stream isolation between listeners by default. See - SOCKSPort for an explanation of isolation flags. (Default: 0) +[[WarnPlaintextPorts]] **WarnPlaintextPorts** __port__,__port__,__...__:: + Tells Tor to issue a warnings whenever the user tries to make an anonymous + connection to one of these ports. This option is designed to alert users + to services that risk sending passwords in the clear. (Default: + 23,109,110,143)
-[[TransPort]] **TransPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: - Open this port to listen for transparent proxy connections. Set this to - 0 if you don't want to allow transparent proxy connections. Set the port - to "auto" to have Tor pick a port for you. This directive can be - specified multiple times to bind to multiple addresses/ports. If multiple - entries of this option are present in your configuration file, Tor will - perform stream isolation between listeners by default. See - SOCKSPort for an explanation of isolation flags. + - + - TransPort requires OS support for transparent proxies, such as BSDs' pf or - Linux's IPTables. If you're planning to use Tor as a transparent proxy for - a network, you'll want to examine and change VirtualAddrNetwork from the - default setting. (Default: 0) - -[[TransProxyType]] **TransProxyType** **default**|**TPROXY**|**ipfw**|**pf-divert**:: - TransProxyType may only be enabled when there is transparent proxy listener - enabled. + - + - Set this to "TPROXY" if you wish to be able to use the TPROXY Linux module - to transparently proxy connections that are configured using the TransPort - option. Detailed information on how to configure the TPROXY - feature can be found in the Linux kernel source tree in the file - Documentation/networking/tproxy.txt. + - + - Set this option to "ipfw" to use the FreeBSD ipfw interface. + - + - On *BSD operating systems when using pf, set this to "pf-divert" to take - advantage of +divert-to+ rules, which do not modify the packets like - +rdr-to+ rules do. Detailed information on how to configure pf to use - +divert-to+ rules can be found in the pf.conf(5) manual page. On OpenBSD, - +divert-to+ is available to use on versions greater than or equal to - OpenBSD 4.4. + - + - Set this to "default", or leave it unconfigured, to use regular IPTables - on Linux, or to use pf +rdr-to+ rules on *BSD systems. + - + - (Default: "default") - -[[NATDPort]] **NATDPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: - Open this port to listen for connections from old versions of ipfw (as - included in old versions of FreeBSD, etc) using the NATD protocol. - Use 0 if you don't want to allow NATD connections. Set the port - to "auto" to have Tor pick a port for you. This directive can be - specified multiple times to bind to multiple addresses/ports. If multiple - entries of this option are present in your configuration file, Tor will - perform stream isolation between listeners by default. See - SocksPort for an explanation of isolation flags. + - + - This option is only for people who cannot use TransPort. (Default: 0) - -[[AutomapHostsOnResolve]] **AutomapHostsOnResolve** **0**|**1**:: - When this option is enabled, and we get a request to resolve an address - that ends with one of the suffixes in **AutomapHostsSuffixes**, we map an - unused virtual address to that address, and return the new virtual address. - This is handy for making ".onion" addresses work with applications that - resolve an address and then connect to it. (Default: 0) - -[[AutomapHostsSuffixes]] **AutomapHostsSuffixes** __SUFFIX__,__SUFFIX__,__...__:: - A comma-separated list of suffixes to use with **AutomapHostsOnResolve**. - The "." suffix is equivalent to "all addresses." (Default: .exit,.onion). - -[[DNSPort]] **DNSPort** ['address'**:**]{empty}__port__|**auto** [_isolation flags_]:: - If non-zero, open this port to listen for UDP DNS requests, and resolve - them anonymously. This port only handles A, AAAA, and PTR requests---it - doesn't handle arbitrary DNS request types. Set the port to "auto" to - have Tor pick a port for - you. This directive can be specified multiple times to bind to multiple - addresses/ports. See SocksPort for an explanation of isolation - flags. (Default: 0) - -[[ClientDNSRejectInternalAddresses]] **ClientDNSRejectInternalAddresses** **0**|**1**:: - If true, Tor does not believe any anonymously retrieved DNS answer that - tells it that an address resolves to an internal address (like 127.0.0.1 or - 192.168.0.1). This option prevents certain browser-based attacks; it - is not allowed to be set on the default network. (Default: 1) - -[[ClientRejectInternalAddresses]] **ClientRejectInternalAddresses** **0**|**1**:: - If true, Tor does not try to fulfill requests to connect to an internal - address (like 127.0.0.1 or 192.168.0.1) __unless an exit node is - specifically requested__ (for example, via a .exit hostname, or a - controller request). If true, multicast DNS hostnames for machines on the - local network (of the form *.local) are also rejected. (Default: 1) - -[[DownloadExtraInfo]] **DownloadExtraInfo** **0**|**1**:: - If true, Tor downloads and caches "extra-info" documents. These documents - contain information about servers other than the information in their - regular server descriptors. Tor does not use this information for anything - itself; to save bandwidth, leave this option turned off. (Default: 0) - -[[WarnPlaintextPorts]] **WarnPlaintextPorts** __port__,__port__,__...__:: - Tells Tor to issue a warnings whenever the user tries to make an anonymous - connection to one of these ports. This option is designed to alert users - to services that risk sending passwords in the clear. (Default: - 23,109,110,143) - -[[RejectPlaintextPorts]] **RejectPlaintextPorts** __port__,__port__,__...__:: - Like WarnPlaintextPorts, but instead of warning about risky port uses, Tor - will instead refuse to make the connection. (Default: None) - -[[OptimisticData]] **OptimisticData** **0**|**1**|**auto**:: - When this option is set, and Tor is using an exit node that supports - the feature, it will try optimistically to send data to the exit node - without waiting for the exit node to report whether the connection - succeeded. This can save a round-trip time for protocols like HTTP - where the client talks first. If OptimisticData is set to **auto**, - Tor will look at the UseOptimisticData parameter in the networkstatus. - (Default: auto) - -[[HSLayer2Nodes]] **HSLayer2Nodes** __node__,__node__,__...__:: - A list of identity fingerprints, nicknames, country codes, and - address patterns of nodes that are allowed to be used as the - second hop in all client or service-side Onion Service circuits. - This option mitigates attacks where the adversary runs middle nodes - and induces your client or service to create many circuits, in order - to discover your primary guard node. - (Default: Any node in the network may be used in the second hop.) - + - (Example: - HSLayer2Nodes ABCD1234CDEF5678ABCD1234CDEF5678ABCD1234, {cc}, 255.254.0.0/8) + - + - When this is set, the resulting hidden service paths will - look like: - + - C - G - L2 - M - Rend + - C - G - L2 - M - HSDir + - C - G - L2 - M - Intro + - S - G - L2 - M - Rend + - S - G - L2 - M - HSDir + - S - G - L2 - M - Intro + - + - where C is this client, S is the service, G is the Guard node, - L2 is a node from this option, and M is a random middle node. - Rend, HSDir, and Intro point selection is not affected by this - option. - + - This option may be combined with HSLayer3Nodes to create - paths of the form: - + - C - G - L2 - L3 - Rend + - C - G - L2 - L3 - M - HSDir + - C - G - L2 - L3 - M - Intro + - S - G - L2 - L3 - M - Rend + - S - G - L2 - L3 - HSDir + - S - G - L2 - L3 - Intro + - + - ExcludeNodes have higher priority than HSLayer2Nodes, - which means that nodes specified in ExcludeNodes will not be - picked. - + - When either this option or HSLayer3Nodes are set, the /16 subnet - and node family restrictions are removed for hidden service - circuits. Additionally, we allow the guard node to be present - as the Rend, HSDir, and IP node, and as the hop before it. This - is done to prevent the adversary from inferring information - about our guard, layer2, and layer3 node choices at later points - in the path. - + - This option is meant to be managed by a Tor controller such as - https://github.com/mikeperry-tor/vanguards that selects and - updates this set of nodes for you. Hence it does not do load - balancing if fewer than 20 nodes are selected, and if no nodes in - HSLayer2Nodes are currently available for use, Tor will not work. - Please use extreme care if you are setting this option manually. - -[[HSLayer3Nodes]] **HSLayer3Nodes** __node__,__node__,__...__:: - A list of identity fingerprints, nicknames, country codes, and - address patterns of nodes that are allowed to be used as the - third hop in all client and service-side Onion Service circuits. - This option mitigates attacks where the adversary runs middle nodes - and induces your client or service to create many circuits, in order - to discover your primary or Layer2 guard nodes. - (Default: Any node in the network may be used in the third hop.) - + - (Example: - HSLayer3Nodes ABCD1234CDEF5678ABCD1234CDEF5678ABCD1234, {cc}, 255.254.0.0/8) + - + - When this is set by itself, the resulting hidden service paths - will look like: + - C - G - M - L3 - Rend + - C - G - M - L3 - M - HSDir + - C - G - M - L3 - M - Intro + - S - G - M - L3 - M - Rend + - S - G - M - L3 - HSDir + - S - G - M - L3 - Intro + - where C is this client, S is the service, G is the Guard node, - L2 is a node from this option, and M is a random middle node. - Rend, HSDir, and Intro point selection is not affected by this - option. - + - While it is possible to use this option by itself, it should be - combined with HSLayer2Nodes to create paths of the form: - + - C - G - L2 - L3 - Rend + - C - G - L2 - L3 - M - HSDir + - C - G - L2 - L3 - M - Intro + - S - G - L2 - L3 - M - Rend + - S - G - L2 - L3 - HSDir + - S - G - L2 - L3 - Intro + - + - ExcludeNodes have higher priority than HSLayer3Nodes, - which means that nodes specified in ExcludeNodes will not be - picked. - + - When either this option or HSLayer2Nodes are set, the /16 subnet - and node family restrictions are removed for hidden service - circuits. Additionally, we allow the guard node to be present - as the Rend, HSDir, and IP node, and as the hop before it. This - is done to prevent the adversary from inferring information - about our guard, layer2, and layer3 node choices at later points - in the path. - + - This option is meant to be managed by a Tor controller such as - https://github.com/mikeperry-tor/vanguards that selects and - updates this set of nodes for you. Hence it does not do load - balancing if fewer than 20 nodes are selected, and if no nodes in - HSLayer3Nodes are currently available for use, Tor will not work. - Please use extreme care if you are setting this option manually. - -[[UseMicrodescriptors]] **UseMicrodescriptors** **0**|**1**|**auto**:: - Microdescriptors are a smaller version of the information that Tor needs - in order to build its circuits. Using microdescriptors makes Tor clients - download less directory information, thus saving bandwidth. Directory - caches need to fetch regular descriptors and microdescriptors, so this - option doesn't save any bandwidth for them. For legacy reasons, auto is - accepted, but it has the same effect as 1. (Default: auto) - -[[PathBiasCircThreshold]] **PathBiasCircThreshold** __NUM__ + - -[[PathBiasNoticeRate]] **PathBiasNoticeRate** __NUM__ + - -[[PathBiasWarnRate]] **PathBiasWarnRate** __NUM__ + - -[[PathBiasExtremeRate]] **PathBiasExtremeRate** __NUM__ + - -[[PathBiasDropGuards]] **PathBiasDropGuards** __NUM__ + - -[[PathBiasScaleThreshold]] **PathBiasScaleThreshold** __NUM__:: - These options override the default behavior of Tor's (**currently - experimental**) path bias detection algorithm. To try to find broken or - misbehaving guard nodes, Tor looks for nodes where more than a certain - fraction of circuits through that guard fail to get built. + - + - The PathBiasCircThreshold option controls how many circuits we need to build - through a guard before we make these checks. The PathBiasNoticeRate, - PathBiasWarnRate and PathBiasExtremeRate options control what fraction of - circuits must succeed through a guard so we won't write log messages. - If less than PathBiasExtremeRate circuits succeed *and* PathBiasDropGuards - is set to 1, we disable use of that guard. + - + - When we have seen more than PathBiasScaleThreshold - circuits through a guard, we scale our observations by 0.5 (governed by - the consensus) so that new observations don't get swamped by old ones. + - + - By default, or if a negative value is provided for one of these options, - Tor uses reasonable defaults from the networkstatus consensus document. - If no defaults are available there, these options default to 150, .70, - .50, .30, 0, and 300 respectively. - -[[PathBiasUseThreshold]] **PathBiasUseThreshold** __NUM__ + - -[[PathBiasNoticeUseRate]] **PathBiasNoticeUseRate** __NUM__ + - -[[PathBiasExtremeUseRate]] **PathBiasExtremeUseRate** __NUM__ + - -[[PathBiasScaleUseThreshold]] **PathBiasScaleUseThreshold** __NUM__:: - Similar to the above options, these options override the default behavior - of Tor's (**currently experimental**) path use bias detection algorithm. + - + - Where as the path bias parameters govern thresholds for successfully - building circuits, these four path use bias parameters govern thresholds - only for circuit usage. Circuits which receive no stream usage - are not counted by this detection algorithm. A used circuit is considered - successful if it is capable of carrying streams or otherwise receiving - well-formed responses to RELAY cells. + - + - By default, or if a negative value is provided for one of these options, - Tor uses reasonable defaults from the networkstatus consensus document. - If no defaults are available there, these options default to 20, .80, - .60, and 100, respectively. - -[[ClientUseIPv4]] **ClientUseIPv4** **0**|**1**:: - If this option is set to 0, Tor will avoid connecting to directory servers - and entry nodes over IPv4. Note that clients with an IPv4 - address in a **Bridge**, proxy, or pluggable transport line will try - connecting over IPv4 even if **ClientUseIPv4** is set to 0. (Default: 1) - -[[ClientUseIPv6]] **ClientUseIPv6** **0**|**1**:: - If this option is set to 1, Tor might connect to directory servers or - entry nodes over IPv6. For IPv6 only hosts, you need to also set - **ClientUseIPv4** to 0 to disable IPv4. Note that clients configured with - an IPv6 address in a **Bridge**, proxy, or pluggable transportline will - try connecting over IPv6 even if **ClientUseIPv6** is set to 0. (Default: 0) - -[[ClientPreferIPv6DirPort]] **ClientPreferIPv6DirPort** **0**|**1**|**auto**:: - If this option is set to 1, Tor prefers a directory port with an IPv6 - address over one with IPv4, for direct connections, if a given directory - server has both. (Tor also prefers an IPv6 DirPort if IPv4Client is set to - 0.) If this option is set to auto, clients prefer IPv4. Other things may - influence the choice. This option breaks a tie to the favor of IPv6. - (Default: auto) (DEPRECATED: This option has had no effect for some - time.) - -[[ClientPreferIPv6ORPort]] **ClientPreferIPv6ORPort** **0**|**1**|**auto**:: - If this option is set to 1, Tor prefers an OR port with an IPv6 - address over one with IPv4 if a given entry node has both. (Tor also - prefers an IPv6 ORPort if IPv4Client is set to 0.) If this option is set - to auto, Tor bridge clients prefer the configured bridge address, and - other clients prefer IPv4. Other things may influence the choice. This - option breaks a tie to the favor of IPv6. (Default: auto) - -[[ClientAutoIPv6ORPort]] **ClientAutoIPv6ORPort** **0**|**1**:: - If this option is set to 1, Tor clients randomly prefer a node's IPv4 or - IPv6 ORPort. The random preference is set every time a node is loaded - from a new consensus or bridge config. When this option is set to 1, - **ClientPreferIPv6ORPort** is ignored. (Default: 0) - -[[PathsNeededToBuildCircuits]] **PathsNeededToBuildCircuits** __NUM__:: - Tor clients don't build circuits for user traffic until they know - about enough of the network so that they could potentially construct - enough of the possible paths through the network. If this option - is set to a fraction between 0.25 and 0.95, Tor won't build circuits - until it has enough descriptors or microdescriptors to construct - that fraction of possible paths. Note that setting this option too low - can make your Tor client less anonymous, and setting it too high can - prevent your Tor client from bootstrapping. If this option is negative, - Tor will use a default value chosen by the directory authorities. If the - directory authorities do not choose a value, Tor will default to 0.6. - (Default: -1) - -[[ClientBootstrapConsensusAuthorityDownloadInitialDelay]] **ClientBootstrapConsensusAuthorityDownloadInitialDelay** __N__:: - Initial delay in seconds for when clients should download consensuses from authorities - if they are bootstrapping (that is, they don't have a usable, reasonably - live consensus). Only used by clients fetching from a list of fallback - directory mirrors. This schedule is advanced by (potentially concurrent) - connection attempts, unlike other schedules, which are advanced by - connection failures. (Default: 6) - -[[ClientBootstrapConsensusFallbackDownloadInitialDelay]] **ClientBootstrapConsensusFallbackDownloadInitialDelay** __N__:: - Initial delay in seconds for when clients should download consensuses from fallback - directory mirrors if they are bootstrapping (that is, they don't have a - usable, reasonably live consensus). Only used by clients fetching from a - list of fallback directory mirrors. This schedule is advanced by - (potentially concurrent) connection attempts, unlike other schedules, - which are advanced by connection failures. (Default: 0) - -[[ClientBootstrapConsensusAuthorityOnlyDownloadInitialDelay]] **ClientBootstrapConsensusAuthorityOnlyDownloadInitialDelay** __N__:: - Initial delay in seconds for when clients should download consensuses from authorities - if they are bootstrapping (that is, they don't have a usable, reasonably - live consensus). Only used by clients which don't have or won't fetch - from a list of fallback directory mirrors. This schedule is advanced by - (potentially concurrent) connection attempts, unlike other schedules, - which are advanced by connection failures. (Default: 0) - -[[ClientBootstrapConsensusMaxInProgressTries]] **ClientBootstrapConsensusMaxInProgressTries** __NUM__:: - Try this many simultaneous connections to download a consensus before - waiting for one to complete, timeout, or error out. (Default: 3) - -[[DormantClientTimeout]] **DormantClientTimeout** __N__ **minutes**|**hours**|**days**|**weeks**:: - If Tor spends this much time without any client activity, - enter a dormant state where automatic circuits are not built, and - directory information is not fetched. - Does not affect servers or onion services. Must be at least 10 minutes. - (Default: 24 hours) - -[[DormantTimeoutDisabledByIdleStreams]] **DormantTimeoutDisabledByIdleStreams** **0**|**1**:: - If true, then any open client stream (even one not reading or writing) - counts as client activity for the purpose of DormantClientTimeout. - If false, then only network activity counts. (Default: 1) - -[[DormantOnFirstStartup]] **DormantOnFirstStartup** **0**|**1**:: - If true, then the first time Tor starts up with a fresh DataDirectory, - it starts in dormant mode, and takes no actions until the user has made - a request. (This mode is recommended if installing a Tor client for a - user who might not actually use it.) If false, Tor bootstraps the first - time it is started, whether it sees a user request or not. - + - After the first time Tor starts, it begins in dormant mode if it was - dormant before, and not otherwise. (Default: 0) - -[[DormantCanceledByStartup]] **DormantCanceledByStartup** **0**|**1**:: - By default, Tor starts in active mode if it was active the last time - it was shut down, and in dormant mode if it was dormant. But if - this option is true, Tor treats every startup event as user - activity, and Tor will never start in Dormant mode, even if it has - been unused for a long time on previous runs. (Default: 0) - + - Note: Packagers and application developers should change the value of - this option only with great caution: it has the potential to - create spurious traffic on the network. This option should only - be used if Tor is started by an affirmative user activity (like - clicking on an applcation or running a command), and not if Tor - is launched for some other reason (for example, by a startup - process, or by an application that launches itself on every login.)
== SERVER OPTIONS