January 2016 - tor-commits - lists.torproject.org

[torspec/master] Update Proposal #247 based on discussion and community review.
by nickm＠torproject.org 07 Jan '16

07 Jan '16

commit e95002e05a18761ca74aebe144b04f658fba9a89 Author: Mike Perry <mikeperry-git(a)torproject.org> Date: Wed Sep 9 02:38:14 2015 +0300 Update Proposal #247 based on discussion and community review. The following changes were made: * Randomize second and third guard layers. * Fold in my comments about using disjoint sets ("buckets") for the third level guard. * Make the paremeter discussion subsection its own section, and include tables with far more detail for the Sybil success rates. * Changed the default parameters based on these tables, and based on my own intuition about Tor's performance properties. * Move the load balancing, torrc, and other performance considerations to their own section (Section 5). * Move "3.2. Distinguishing new HS circuits from normal HS circuits" to section 4.1. * Fold in some of "3.3. Circuit nodes can now be linked to specific hidden services" into 4.1. Some of it I just removed, though, because I did not find it credible. * Added Roger's concerns about guard linkability to Section 4.2. * Added a denial of service subsection to Section 4.3. * Try to make a coherent threat model and specify its assumptions * Put the rotation period in a separate subsection from the number of guards * Switch to using min(X,X) and max(X,X) for the distribution for the second and third layer guard lifespans, respectively. Add a subsection describing this distribution (3.2.3) * Include python functions for the min and max probability distributions. * Mention that third nodes can probe to see if they are one of the current RPs. * Provide CDF for rotation functions for Sybil runtime expecations. * Add s7r's DoS points. * Add notes from Thursday dev meeting discussion. * Address Aaron's mailinglist comments (except for the CDF). * Add discussion items from the dev meeting. --- proposals/247-hs-guard-discovery.txt | 777 ++++++++++++++++++++++++++++------ 1 file changed, 639 insertions(+), 138 deletions(-) diff --git a/proposals/247-hs-guard-discovery.txt b/proposals/247-hs-guard-discovery.txt index f6ead25..0d9cd96 100644 --- a/proposals/247-hs-guard-discovery.txt +++ b/proposals/247-hs-guard-discovery.txt @@ -1,6 +1,6 @@ Filename: 247-hs-guard-discovery.txt Title: Defending Against Guard Discovery Attacks using Vanguards -Author: George Kadianakis +Authors: George Kadianakis and Mike Perry Created: 2015-07-10 Status: Draft @@ -11,211 +11,712 @@ Status: Draft provides an attack vector for a guard discovery attack since anyone can force an HS to construct a 3-hop circuit to a relay (#9001). - Following the guard discovery attack with a compromise or coercion - of the guard node can lead to the deanonymization of a hidden - service. + Following the guard discovery attack with a compromise and/or + coercion of the guard node can lead to the deanonymization of a + hidden service. 1. Overview - This document tries to make the above guard discovery + coersion + This document tries to make the above guard discovery + compromise attack harder to launch. It introduces an optional configuration option which makes the hidden service also pin the second and third hops of its circuits for a longer duration. With this new path selection, we force the adversary to perform a - Sybil attack and two coercion attacks before succeeding. This is + Sybil attack and two compromise attacks before succeeding. This is an improvement over the current state where the Sybil attack is - trivial to pull off, and only a single coercion attack is required. + trivial to pull off, and only a single compromise attack is required. - With this new path selection, an attacker is forced to do a - coercion attack before learning the guard node of a hidden - service. This increases the uncertainty of the attacker, since he - will need to perform a coercion attack before he learns the - identity of the guard node and whether he can compromise - it. Coercion attacks are costly and potentially detectable, so an - attacker will have to think twice before beginning a chain of - coercion attacks that he might not be able to complete. + With this new path selection, an attacker is forced to do a one or + more node compromise attacks before learning the guard node of a hidden + service. This increases the uncertainty of the attacker, since + compromise attacks are costly and potentially detectable, so an + attacker will have to think twice before beginning a chain of node + compromise attacks that he might not be able to complete. 1.1. Visuals Here is how a hidden service rendezvous circuit currently looks like: - -> middle_1 -> middle_A - -> middle_2 -> middle_B - -> middle_3 -> middle_C - -> middle_4 -> middle_D - HS -> guard -> middle_5 -> middle_E -> Rendezvous Point - -> middle_6 -> middle_F - -> middle_7 -> middle_G - -> middle_8 -> middle_H + -> middle_1 -> middle_A + -> middle_2 -> middle_B + -> middle_3 -> middle_C + -> middle_4 -> middle_D + HS -> guard -> middle_5 -> middle_E -> Rendezvous Point + -> middle_6 -> middle_F + -> middle_7 -> middle_G + -> middle_8 -> middle_H -> ... -> ... -> middle_n -> middle_n this proposal pins the two middles nodes to a much more restricted set, as follows: - -> guard_3_A - -> guard_3_B - HS -> guard_1 -> guard_2_A -> guard_3_C -> Rendezvous Point - -> guard_2_B -> guard_3_D - -> guard_3_E - -> guard_3_F + -> guard_3A_A + -> guard_2_A -> guard_3A_B + -> guard_3A_C -> Rendezvous Point + HS -> guard_1 + -> guard_3B_D + -> guard_2_B -> guard_3B_E + -> guard_3B_F -> Rendezvous Point + + + Note that the third level guards are partitioned into buckets such that + they are only used with one specific second-level guard. In this way, + we ensure that even if an adversary is able to execute a Sybil attack + against the third layer, they only get to learn one of the second-layer + Guards, and not all of them. This prevents the adversary from gaining + the ability to take their pick of the weakest of the second-level + guards for further attack. 2. Design This feature requires the HiddenServiceGuardDiscovery torrc option to be enabled. - When a hidden service picks its guard nodes, it also picks two - additional sets of guard nodes `second_guard_set` and - `third_guard_set` of size NUM_SECOND_GUARDS and NUM_THIRD_GUARDS - respectively. + When a hidden service picks its guard nodes, it also picks an + additional NUM_SECOND_GUARDS-sized set of middle nodes for its + `second_guard_set`. For each of those middle layer guards, it + picks NUM_THIRD_GUARDS that will be used only with a specific + middle node. These sets are unique to each hidden service created + by a single Tor client, and must be kept separate and distinct. When a hidden service needs to establish a circuit to an HSDir, introduction point or a rendezvous point, it uses nodes from `second_guard_set` as the second hop of the circuit and nodes from - `third_guard_set` as third hops of the circuit. + that second hop's corresponding `third_guard_set` as third hops of + the circuit. - A hidden service rotates 'second_guard_set' every - SECOND_GUARD_ROTATION hours, and 'third_guard_set' every - THIRD_GUARD_ROTATION hours. + A hidden service rotates nodes from the 'second_guard_set' at a random + time between MIN_SECOND_GUARD_LIFETIME hours and + MAX_SECOND_GUARD_LIFETIME hours. - These extra guard nodes should be picked with the same path - selection procedure that is used for regular guard nodes. Care - should be taken such that guard sets do not share any common - relays. XXX or simply that they are not used in the same circuit? + A hidden service rotates nodes from the 'third_guard_set' at a random + time between MIN_THIRD_GUARD_LIFETIME and MAX_THIRD_GUARD_LIFETIME + hours. - XXX maybe pick the second and third layer guards from the set of - middle nodes but also enforce some kind of uptime requirement? - that should greatly help our load balancing. + These extra guard nodes should be picked with the same path selection + procedure that is used for regular middle nodes (though see Section 4.3 + and Section 5.1 for reasons to restrict this slightly beyond the current + path selection rules). - XXX maybe we should also introduce consensus flags for the extra - guard layers? Vanguard? + Each node's rotation time is tracked independently, to avoid disclosing + the rotation times of the primary and second-level guards. XXX how should proposal 241 ("Resisting guard-turnover attacks") be applied here? 2.1. Security parameters - We set NUM_SECOND_GUARDS to 2 nodes and NUM_THIRD_GUARDS to 6 nodes. - We set SECOND_GUARD_ROTATION to 2 weeks and THIRD_GUARD_ROTATION to 1 day. + We set NUM_SECOND_GUARDS to 4 nodes and NUM_THIRD_GUARDS to 4 nodes (ie + four sets of four). However, see Section 5.2 for some performance + versus security tradeoffs and discussion. + + We set MIN_SECOND_GUARD_LIFETIME to 1 day, and + MAX_SECOND_GUARD_LIFETIME to 32 days inclusive, for an average rotation + rate of ~11 days, using the min(X,X) distribution specified in Section + 3.2.3. + + We set MIN_THIRD_GUARD_LIFETIME to 1 hour, and + MAX_THIRD_GUARD_LIFETIME to 18 hours inclusive, for an average rotation + rate of ~12 hours, using the max(X,X) distribution specified in Section + 3.2.3. + + The above parameters should be configurable in the Tor consensus and + torrc. - See the discussion section for more analysis on these constants. + See Section 3 for more analysis on these constants. -3. Discussion -3.1 How were these security parameters chosen? +3. Rationale and Security Parameter Selection + +3.1. Threat model, Assumptions, and Goals Consider an adversary with the following powers: - Can launch a Sybil guard discovery attack against any node of a rendezvous circuit. The slower the rotation period of the node, - the longer the attack takes. - - - Can compromise any node on the network. We assume that the - adversary cannot compromise too many nodes, otherwise Tor's - security would be breached anyhow. - - We now calculate the time it takes for the adversary to launch a - Sybil attack with 50% success assuming 5% network control. This - depends solely on how frequently the hidden service rotates that node: - - +-------------------+-------------------------------+------------------------+----------------------------+ - | Rotation period | Sybil attack with 50% success | Sybil attack (2 guards)| Sybil attack (6 guards) | - +-------------------+-------------------------------+------------------------+----------------------------+ - | 1 hour | 14 hours | 7 hours | 2.5 hours | - | 1 day | 14 days | 7 days | 2.5 days | - | 1 week | 3.5 months | 6 weeks | 2.5 weeks | - | 2 weeks | 7 months | 3.5 months | 5 weeks | - | 1 month | 1 year and 2 months | 6 months | 2.5 months | - | 3 months | 3.5 years | 1.7 years | 6 months | - +-------------------+-------------------------------+------------------------+----------------------------+ - Required time for Sybil attack by a 5% adversary - - Our security parameters were selected so that the first two layers - of guards should be hard to attack using a Sybil guard discovery - attack and hence require a coercion attack. On the other hand, the - outmost layer of guards should rotate fast enough to _require_ a - Sybil attack. - - XXX does this security model even make sense? what about a network - adversary, or an adversary that can launch congestion attacks - etc.???? - -3.2. Distinguishing new HS circuits from normal HS circuits + the longer the attack takes. Similarly, the higher the percentage + of the network is compromised, the faster the attack runs. + + - Can compromise any node on the network, but this compromise takes + time and potentially even coercive action, and also carries risk + of discovery. + + We also make the following assumptions about the types of attacks: + + 1. A Sybil attack is observable by both people monitoring the network + for large numbers of new nodes, as well as vigilant hidden service + operators. It will require either large amounts of traffic sent + towards the hidden service, multiple test circuits, or both. + + 2. A Sybil attack against the second or first layer Guards will be + more noisy than a Sybil attack against the third layer guard, since the + second and first layer Sybil attack requires a timing side channel in + order to determine success, where as the Sybil success is almost + immediately obvious to third layer guard, since it will be instructed + to connect to a cooperating malicious rend point by the adversary. + + 3. As soon as the adversary is confident they have won the Sybil attack, + an even more aggressive circuit building attack will allow them to + determine the next node very fast (an hour or less). + + 4. The adversary is strongly disincentivized from compromising nodes that + may prove useless, as node compromise is even more risky for the + adversary than a Sybil attack in terms of being noticed. + + Given this threat model, our security parameters were selected so that + the first two layers of guards should be hard to attack using a Sybil + guard discovery attack and hence require a node compromise attack. Ideally, + we want the node compromise attacks to carry a non-negligible probability of + being useless to the adversary by the time they complete. + + On the other hand, the outermost layer of guards should rotate fast enough to + _require_ a Sybil attack. + +3.2. Parameter Tuning + +3.2.1. Sybil rotation counts for a given number of Guards + + The probability of Sybil success for Guard discovery can be modeled as + the probability of choosing 1 or more malicious middle nodes for a + sensitive circuit over some period of time. + + P(At least 1 bad middle) = 1 - P(All Good Middles) + = 1 - P(One Good middle)^(num_middles) + = 1 - (1 - c/n)^(num_middles) + + c/n is the adversary compromise percentage + + In the case of Vanguards, num_middles is the number of Guards you rotate + through in a given time period. This is a function of the number of vanguards + in that position (v), as well as the number of rotations (r). + + P(At least one bad middle) = 1 - (1 - c/n)^(v*r) + + Here's detailed tables in terms of the number of rotations required for + a given Sybil success rate for certain number of guards. + + 1.0% Network Compromise: + Sybil Success One Two Three Four Five Six Eight Nine Ten Twelve Sixteen + 10% 11 6 4 3 3 2 2 2 2 1 1 + 15% 17 9 6 5 4 3 3 2 2 2 2 + 25% 29 15 10 8 6 5 4 4 3 3 2 + 50% 69 35 23 18 14 12 9 8 7 6 5 + 60% 92 46 31 23 19 16 12 11 10 8 6 + 75% 138 69 46 35 28 23 18 16 14 12 9 + 85% 189 95 63 48 38 32 24 21 19 16 12 + 90% 230 115 77 58 46 39 29 26 23 20 15 + 95% 299 150 100 75 60 50 38 34 30 25 19 + 99% 459 230 153 115 92 77 58 51 46 39 29 + + 5.0% Network Compromise: + Sybil Success One Two Three Four Five Six Eight Nine Ten Twelve Sixteen + 10% 3 2 1 1 1 1 1 1 1 1 1 + 15% 4 2 2 1 1 1 1 1 1 1 1 + 25% 6 3 2 2 2 1 1 1 1 1 1 + 50% 14 7 5 4 3 3 2 2 2 2 1 + 60% 18 9 6 5 4 3 3 2 2 2 2 + 75% 28 14 10 7 6 5 4 4 3 3 2 + 85% 37 19 13 10 8 7 5 5 4 4 3 + 90% 45 23 15 12 9 8 6 5 5 4 3 + 95% 59 30 20 15 12 10 8 7 6 5 4 + 99% 90 45 30 23 18 15 12 10 9 8 6 + + 10.0% Network Compromise: + Sybil Success One Two Three Four Five Six Eight Nine Ten Twelve Sixteen + 10% 2 1 1 1 1 1 1 1 1 1 1 + 15% 2 1 1 1 1 1 1 1 1 1 1 + 25% 3 2 1 1 1 1 1 1 1 1 1 + 50% 7 4 3 2 2 2 1 1 1 1 1 + 60% 9 5 3 3 2 2 2 1 1 1 1 + 75% 14 7 5 4 3 3 2 2 2 2 1 + 85% 19 10 7 5 4 4 3 3 2 2 2 + 90% 22 11 8 6 5 4 3 3 3 2 2 + 95% 29 15 10 8 6 5 4 4 3 3 2 + 99% 44 22 15 11 9 8 6 5 5 4 3 + + The rotation counts in these tables were generated with: + def num_rotations(c, v, success): + r = 0 + while 1-math.pow((1-c), v*r) < success: r += 1 + return r + +3.2.2. Rotation Period + + As specified in Section 3.1, the primary driving force for the third + layer selection was to ensure that these nodes rotate fast enough that + it is not worth trying to compromise them, because it is unlikely for + compromise to succeed and yield useful information before the nodes stop + being used. For this reason we chose 1 to 18 hours, with a weighted + distribution (Section 3.2.3) causing the expected average to be 12 hours. + + From the table in Section 3.2.1, with NUM_SECOND_GUARDS=4 and + NUM_THIRD_GUARDS=4, it can be seen that this means that the Sybil attack + will complete with near-certainty (99%) in 29*12 hours (14.5 days) for + the 1% adversary, 3 days for the 5% adversary, and 1.5 days for the 10% + adversary. + + Since rotation of each node happens independently, the distribution of + when the adversary expects to win this Sybil attack in order to discover + the next node up is uniform. This means that on average, the adversary + should expect that half of the rotation period of the next node is already + over by the time that they win the Sybil. + + With this fact, we choose our range and distribution for the second + layer rotation to be short enough to cause the adversary to risk + compromising nodes that are useless, yet long enough to require a + Sybil attack to be noticeable in terms of client activity. For this + reason, we choose a minimum second-layer guard lifetime of 1 day, + since this gives the adversary a minimum expected value of 12 hours for + during which they can compromise a guard before it might be rotated. + If the total expected rotation rate is 11 days, then the adversary can + expect overall to have 5.5 days remaining after completing their Sybil + attack before a second-layer guard rotates away. + +3.2.3. Rotation distributions + + In order to skew the distribution of the third layer guard towards + higher values, we use max(X,X) for the distribution, where X is a + random variable that takes on values from the uniform distribution. + + In order to skew the distribution of the second layer guard towards + low values (to increase the risk of compromising useless nodes) we + skew the distribution towards lower values, using min(X,X). + + Here's a table of expectation (arithmetic means) for relevant + ranges of X (sampled from 0..N-1). The table was generated with the + following python functions: + + def ProbMinXX(N, i): return (2.0*(N-i)-1)/(N*N) + def ProbMaxXX(N, i): return (2.0*i+1)/(N*N) + + def ExpFn(N, ProbFunc): + exp = 0.0 + for i in xrange(N): exp += i*ProbFunc(N, i) + return exp + + The current choice for second-layer guards is noted with **, and + the current choice for third-layer guards is noted with ***. + + Range Exp[Min(X,X)] Exp[Max(X,X)] + 10 2.85 6.15 + 11 3.18 6.82 + 12 3.51 7.49 + 13 3.85 8.15 + 14 4.18 8.82 + 15 4.51 9.49 + 16 4.84 10.16 + 17 5.18 10.82*** + 18 5.51 11.49 + 19 5.84 12.16 + 20 6.18 12.82 + 21 6.51 13.49 + 22 6.84 14.16 + 23 7.17 14.83 + 24 7.51 15.49 + 25 7.84 16.16 + 26 8.17 16.83 + 27 8.51 17.49 + 28 8.84 18.16 + 29 9.17 18.83 + 30 9.51 19.49 + 31 9.84 20.16 + 32 10.17** 20.83 + 33 10.51 21.49 + 34 10.84 22.16 + 35 11.17 22.83 + 36 11.50 23.50 + 37 11.84 24.16 + 38 12.17 24.83 + 39 12.50 25.50 + + The Cumulative Density Function (CDF) tells us the probability that a + guard will no longer be in use after a given number of time units have + passed. + + Because the Sybil attack on the third node is expected to complete at any + point in the second node's rotation period with uniform probability, if we + want to know the probability that a second-level Guard node will still be in + use after t days, we first need to compute the probability distribution of + the rotation duration of the second-level guard at a uniformly random point + in time. Let's call this P(R=r). + + For P(R=r), the probability of the rotation duration depends on the selection + probability of a rotation duration, and the fraction of total time that + rotation is likely to be in use. This can be written as: + + P(R=r) = ProbMinXX(X=r)*r / \sum_{i=1}^N ProbMinXX(X=i)*i + + or in Python: + + def ProbR(N, r, ProbFunc=ProbMinXX): + return ProbFunc(N, r)*r/ExpFn(N, ProbFunc) + + For the full CDF, we simply sum up the fractional probability density for + all rotation durations. For rotation durations less than t days, we add the + entire probability mass for that period to the density function. For + durations d greater than t days, we take the fraction of that rotation + period's selection probability and multiply it by t/d and add it to the + density. In other words: + + def FullCDF(N, t, ProbFunc=ProbR): + density = 0.0 + for d in xrange(N): + if t >= d: density += ProbFunc(N, d) + # The +1's below compensate for 0-indexed arrays: + else: density += ProbFunc(N, d)*(float(t+1))/(d+1) + return density + + Computing this yields the following distribution for our current parameters: + + t P(SECOND_ROTATION <= t) + 1 0.07701 + 2 0.15403 + 3 0.22829 + 4 0.29900 + 5 0.36584 + 6 0.42869 + 7 0.48754 + 8 0.54241 + 9 0.59338 + 10 0.64055 + 11 0.68402 + 12 0.72392 + 13 0.76036 + 14 0.79350 + 15 0.82348 + 16 0.85043 + 17 0.87452 + 18 0.89589 + 19 0.91471 + 20 0.93112 + 21 0.94529 + 22 0.95738 + 23 0.96754 + 24 0.97596 + 25 0.98278 + 26 0.98817 + 27 0.99231 + 28 0.99535 + 29 0.99746 + 30 0.99881 + 31 0.99958 + 32 0.99992 + 33 1.00000 + + This CDF tells us that for the second-level Guard rotation, the + adversary can expect that 7.7% of the time, their third-level Sybil + attack will provide them with a second-level guard node that has only + 1 day remaining before it rotates. 15.4% of the time, there will + be only 2 day or less remaining, and 22.8% of the time, 3 days or less. + + Note that this distribution is still a day-resolution approximation. The + actual numbers are likely even more biased towards lower values. + + In this way, we achieve our goal of ensuring that the adversary must + do the prep work to compromise multiple second-level nodes before + likely being successful, or be extremely fast in compromising a + second-level guard after winning the Sybil attack. + + +4. Security concerns and mitigations + +4.1. Mitigating fingerprinting of new HS circuits By pinning the middle nodes of rendezvous circuits, we make it easier for all hops of the circuit to detect that they are part of a - special hidden service circuit. - XXX hm how does the outermost guard knows? + special hidden service circuit with varying degrees of certainty. + + The Guard node is able to recognize a Vanguard client with a high + degree of certainty because it will observe a client IP creating the + overwhelming majority of its circuits to just a few middle nodes in + any given 10-18 day time period. + + The middle nodes will be able to tell with a variable certainty that + depends on both its traffic volume and upon the popularity of the + service, because they will see a large number of circuits that tend to + pick the same Guard and Exit. + + The final nodes will be able to tell with a similar level certainty + that depends on their capacity and the service popularity, because they + will see a lot of rend handshakes that all tend to have the same second + hop. The final nodes can also actively confirm that they have been + selected for the third hop by creating multiple Rend circuits to a + target hidden service, and seeing if they are chosen for the Rend point. + + The most serious of these is the Guard fingerprinting issue. When + proposal xxx-padding-negotiation is implemented, services that enable + this feature should use those padding primitives to create fake circuits + to random middle nodes that are not their guards, in an attempt to look + more like a client. + + Additionally, if Tor Browser implements "virtual circuits" based on + SOCKS username+password isolation in order to enforce the re-use of + paths when SOCKS username+passwords are re-used, then the number of + middle nodes in use during a typical user's browsing session will be + proportional to the number of sites they are viewing at any one time. + This is likely to be much lower than one new middle node every ten + minutes, and for some users, may be close to the number of Vanguards + we're considering. + + This same reasoning is also an argument for increasing the number of + second-level guards beyond just two, as it will spread the hidden + service's traffic over a wider set of middle nodes, making it both + easier to cover, and behave closer to a client using SOCKS virtual + circuit isolation. + +4.2. Hidden service linkability + + Multiple hidden services on the same Tor instance should use separate + second and third level guard sets, otherwise an adversary is trivially + able to determine that the two hidden services are co-located by + inspecting their current chosen rend point nodes. + + Unfortunately, if the adversary is still able to determine that two or + more hidden services are run on the same Tor instance through some other + means, then they are able to take advantage of this fact to execute a + Sybil attack more effectively, since there will now be an extra set of + guard nodes for each hidden service in use. + + For this reason, if Vanguards are enabled, and more than one hidden + service is configured, the user should be advised to ensure that they do + not accidentally leak that the two hidden services are from the same Tor + instance. + + For cases where the user or application wants to deliberately link multiple + different hidden services together (for example, to support concurrent file + transfer and chat for the same identity), this behavior should be + configurable. A torrc option DisjointHSVanguards should be provided that + defaults to keeping the Vanguards separate for each hidden service should + be provided. + +4.3. Long term information leaks + + Due to Tor's path selection constraints, the client will never chose + its primary guard node as later positions in the circuit. Over time, + the absence of these nodes will give away information to the adversary. + + Unfortunately, the current solution (from bug #14917) of simply creating + a temporary second guard connection to allow the primary guard to appear + in some paths will make the hidden service fingerprinting problem worse, + since only hidden services will exhibit this behavior on the local + network. The simplest mitigation is to require that no Guard-flagged nodes + be used for the second and third-level nodes at all, and to allow the + primary guard to be chosen as a rend point. + + Additionally, in order to further limit the exposure of secondary guards + to sybil attacks, the bin position of the third-level guards should be + stable over long periods of time. When choosing third-level guards, these + guards should be given a fixed bin number so that if they are selected + at a later point in the future, they are placed after the same + second-level guard, and not a different one. A potential stateless way + of accomplishing this is to assign third-level guards to a bin number + such that H(bin_number | HS addr) is closest to the key for the + third-level relay. + +4.4. Denial of service + + Since it will be fairly trivial for the adversary to enumerate the + current set of rend nodes for a hidden service, denial of service + becomes a serious risk for Vanguard users. + + For this reason, it is important to support a large number of + third-level guards, to increase the amount of resources required to + bring a hidden service offline by DoSing just a few Tor nodes. + + Even with multiple third-level guards, an adversary is still able to + degrade either performance or user experience significantly, simply by + taking out a fraction of them. The solution to this is to make use + of the circuit build timeout code (Section 5.2) to have the hidden + service retry the rend connection multiple times. Unfortunately, it + unwise to simply replace unresponsive third-level guards that fail to + complete circuits, as this will accelerate the Sybil attack. + + +5. Performance considerations + + The switch to a restricted set of nodes will very likely cause + significant performance issues, especially for high-traffic hidden + services. If any of the nodes they select happen to be temporarily + overloaded, performance will suffer dramatically until the next + rotation period. + +5.1. Load Balancing + + Since the second and third level "guards" are chosen from the set of all + nodes eligible for use in the "middle" hop (as per hidden services + today), this proposal should not significantly affect the long-term load + on various classes of the Tor network, and should not require any + changes to either the node weight equations, or the bandwidth + authorities. + + Unfortunately, transient load is another matter, as mentioned + previously. It is very likely that this scheme will increase instances + of transient overload at nodes selected by high-traffic hidden services. + + One option to reduce the impact of this transient overload is to + restrict the set of middle nodes that we chose from to some percentage + of the fastest middle-capable relays in the network. This may have + some impact on load balancing, but since the total volume of hidden + service traffic is low, it may be unlikely to matter. + +5.2. Circuit build timeout and topology + + The adaptive circuit build timeout mechanism in Tor is what corrects + for instances of transient node overload right now. + + The timeout will naturally tend to select the current fastest and + least-loaded paths even through this set of restricted routes, but it + may fail to behave correctly if there are a very small set of nodes in + each guard set, as it is based upon assumptions about the current path + selection algorithm, and it may need to be tuned specifically for + Vanguards, especially if the set of possible routes is small. + + It turns out that a fully-connected/mesh (aka non-binned) second guard to + third guard mapping topology is a better option for CBT for performance, + because it will create a larger total set of paths for CBT to choose + from while using fewer nodes. + + This comes at the expense of exposing all second-layer guards to a + single sybil attack, but for small numbers of guard sets, it may be + worth the tradeoff. However, it also turns out that this need not block + implementation, as worst-case the data structures and storage needed to + support a fully connected mesh topology can do so by simply replicating + the same set of third-layer guards for each second-layer guard bin. + + Since we only expect this tradeoff to be worth it when the sets are + small, this replication should not be expensive in practice. + +5.3. OnionBalance + + At first glance, it seems that this scheme makes multi-homed hidden + services such as OnionBalance[1] even more important for high-traffic + hidden services. + + Unfortunately, if it is equally damaging to the user for any of their + multi-homed hidden service locations to be discovered, then OnionBalance + is strictly equivalent to simply increasing the number of second-level + guard nodes in use, because an active adversary can perform simultaneous + Sybil attacks against all of the rend points offered by the multi-homed + OnionBalance introduction points. + + XXX: This actually matters for high-perf censorship resistant publishing. + It is better for those users to use onionbalance than to up their guards, + since redundancy is useful for them. + +5.4. Default vs optional behavior + + We suggest this torrc option to be optional because it changes path + selection in a way that may seriously impact hidden service performance, + especially for high traffic services that happen to pick slow guard + nodes. + + However, by having this setting be disabled by default, we make hidden + services who use it stand out a lot. For this reason, we should in fact + enable this feature globally, but only after we verify its viability for + high-traffic hidden services, and ensure that it is free of second-order + load balancing effects. + + Even after that point, until Single Onion Services are implemented, + there will likely still be classes of very high traffic hidden services + for whom some degree of location anonymity is desired, but for which + performance is much more important than the benefit of Vanguards, so there + should always remain a way to turn this option off. + - Compare this to the current Tor network, where only the guard and - the third hop of the HS circuit can trivially distinguish whether - it's part of an HS circuit. +6. Future directions -3.3. Circuit nodes can now be linked to specific hidden services + Here are some more ideas for improvements that should be done sooner + or later: - With this proposal the hops of hidden service circuits will be - static, and hence an adversrary will be able to map them to specific - hidden services. For example, a middle node that sees two hidden - service circuits with the same guard node in different times, can - assume with non-negligible probability that both circuits correspond - to the same hidden service. + - Do we want to consider using Tor's GeoIP country database (if present) + to ensure that the second-layer guards are chosen from a different + country as the first-layer guards, or does this leak too much information + to the adversary? - That said, this is also partially the case for the current Tor - network, where the middle node can associate a guard with a specific - hidden service. + - What does the security vs performance tradeoff actually look like + for different amounts of bins? Or for mesh vs bins? We may need + to simulate or run CBT tests to learn this. -3.4 Why is the torrc setting disabled by default, if it's so good? + - With this tradeoff information, do we want to provide the user + (or application) with a choice of 3 different Vanguard sets? + One could imagine "small", "medium", and "large", for example. - We suggest this torrc option to be optional because it puts - additional load on guard nodes and we are not sure if the network - will be able to handle it. - However, by having this setting be disabled by default, we make - hidden services who use it stand out a lot. For this reason, we - should eventually fix our hidden service circuit load balancing so - that we can enable this globally. +7. Acknowledgments - XXX But hidden services traffic is only 6% of the total network, so - maybe it's not that big of a problem and we should just enable - this feature by default anyway + Thanks to Aaron Johnson, John Brooks, Mike Perry and everyone else + who helped with this idea. -3.4.1. How should we load balance to enable this feature globally? - The load balancing issue with this feature is that hidden service - traffic that would otherwise be passing through middle nodes, will - now be passing through guard nodes. +Appendix A: Full Python program for generating tables in this proposal - Furthermore, this additional traffic is not accounted for in our - bandwidth weights. This means that a guard node that had 1% - probability of being chosen as a guard for normal circuits, will - still have the same probability of being chosen as a guard even - though the hidden service traffic that it pushes increases. +#!/usr/bin/python +import math - To improve the load balancing here, we could have each relay report - the amount of hidden service traffic it pushes every day (#15254), - and have the authorities take this into account when they calculate - bandwidth weights. The idea here would be that the dirauths would - know that N% of the network is hidden services traffic, hence they - would tweak the bandwidth weights such that guards would reserve - some N% of their bandwidth for hidden service purposes. +############ Section 3.2.1 ################# +def num_rotations(c, v, success): + i = 0 + while 1-math.pow((1-c), v*i) < success: i += 1 + return i -4. Future directions +def rotation_line(c, pct): + print " %2d%% %6d%6d%6d%6d%6d%6d%6d%6d%6d%6d%8d" % \ + (pct, num_rotations(c, 1, pct/100.0), num_rotations(c, 2, pct/100.0), \ + num_rotations(c, 3, pct/100.0), num_rotations(c, 4, pct/100.0), + num_rotations(c, 5, pct/100.0), num_rotations(c, 6, pct/100.0), + num_rotations(c, 8, pct/100.0), num_rotations(c, 9, pct/100.0), + num_rotations(c, 10, pct/100.0), num_rotations(c, 12, pct/100.0), + num_rotations(c, 16, pct/100.0)) - Here are some more ideas for improvements that should be done sooner - or later: +def rotation_table_321(): + for c in [1,5,10]: + print "\n %2.1f%% Network Compromise: " % c + print " Sybil Success One Two Three Four Five Six Eight Nine Ten Twelve Sixteen" + for success in [10,15,25,50,60,75,85,90,95,99]: + rotation_line(c/100.0, success) - - Maybe we should make the size and rotation period of - secondary/third guard sets to be configurable by the user. +############ Section 3.2.3 ################# +def ProbMinXX(N, i): return (2.0*(N-i)-1)/(N*N) +def ProbMaxXX(N, i): return (2.0*i+1)/(N*N) - - To make it harder for an adversary, a hidden service MAY extend - the path length of its circuits by an additional static hop. This - forces the adversary to use another coercion attack to walk the - chain up to the hidden service. +def ExpFn(N, ProbFunc): + exp = 0.0 + for i in xrange(N): exp += i*ProbFunc(N, i) + return exp -5. Acknowledgements +def ProbR(N, r, ProbFunc=ProbMinXX): + return ProbFunc(N, r)*r/ExpFn(N, ProbFunc) - Thanks to Aaron Johnson, John Brooks, Mike Perry and everyone else - who helped with this idea. +def FullCDF(N, t, ProbFunc=ProbR): + density = 0.0 + for d in xrange(N): + if t >= d: density += ProbFunc(N, d) + # The +1's below compensate for 0-indexed arrays: + else: density += ProbFunc(N, d)*float(t+1)/(d+1) + return density + +def expectation_table_323(): + print "\n Range Min(X,X) Max(X,X)" + for i in xrange(10,40): + print " %2d %2.2f %2.2f" % (i, ExpFn(i,ProbMinXX), ExpFn(i, ProbMaxXX)) + +def CDF_table_323(): + print "\n t P(SECOND_ROTATION <= t)" + for i in xrange(1,34): + print " %2d %2.5f" % (i, FullCDF(33, i-1)) + +########### Output ############ + +# Section 3.2.1 +rotation_table_321() + +# Section 3.2.3 +expectation_table_323() +CDF_table_323() + + +---------------------- +1. https://onionbalance.readthedocs.org/en/latest/design.html#overview

1 0

[translation/tor_animation_completed] Update translations for tor_animation_completed
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit 7118d5e464638815e2eccaaa6cfd0c654b27ca15 Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:48 2016 +0000 Update translations for tor_animation_completed --- tr.srt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tr.srt b/tr.srt index 231dd8e..a361df2 100644 --- a/tr.srt +++ b/tr.srt @@ -1,6 +1,6 @@ 1 00:00:00,660 --> 00:00:02,780 -Internet kullanmaya çok alıştık. +İnternet kullanmaya çok alıştık. 2 00:00:03,120 --> 00:00:07,700

1 0

[translation/tor_animation] Update translations for tor_animation
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit 34164793bf3b3438460402c8b6767461ba57c6b7 Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:43 2016 +0000 Update translations for tor_animation --- tr.srt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tr.srt b/tr.srt index 231dd8e..a361df2 100644 --- a/tr.srt +++ b/tr.srt @@ -1,6 +1,6 @@ 1 00:00:00,660 --> 00:00:02,780 -Internet kullanmaya çok alıştık. +İnternet kullanmaya çok alıştık. 2 00:00:03,120 --> 00:00:07,700

1 0

[translation/abouttor-homepage_completed] Update translations for abouttor-homepage_completed
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit 3eec19b2192909986688abbcff581bd40b6d8fb9 Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:24 2016 +0000 Update translations for abouttor-homepage_completed --- tr/aboutTor.dtd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tr/aboutTor.dtd b/tr/aboutTor.dtd index b359035..6546f6d 100644 --- a/tr/aboutTor.dtd +++ b/tr/aboutTor.dtd @@ -13,7 +13,7 @@ <!ENTITY aboutTor.check.label "Tor Ağ Ayarlarını Sınayın"> <!ENTITY aboutTor.success.label "Tor Browser'a Hoş Geldiniz"> -<!ENTITY aboutTor.success2.label "Tor ağına bağlanın."> +<!ENTITY aboutTor.success2.label "Tor ağına bağlanıldı."> <!ENTITY aboutTor.success3.label "Artık Internet'te özgürce ve anonim olarak dolaşabilirsiniz."> <!ENTITY aboutTor.failure.label "Bir Şeyler Ters Gitti!"> <!ENTITY aboutTor.failure2.label "Tor bu tarayıcı ile çalışmıyor.">

1 0

[translation/abouttor-homepage] Update translations for abouttor-homepage
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit 3a6a4616004e499e226f615cca2a0e6152f5cdc6 Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:19 2016 +0000 Update translations for abouttor-homepage --- tr/aboutTor.dtd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tr/aboutTor.dtd b/tr/aboutTor.dtd index b359035..6546f6d 100644 --- a/tr/aboutTor.dtd +++ b/tr/aboutTor.dtd @@ -13,7 +13,7 @@ <!ENTITY aboutTor.check.label "Tor Ağ Ayarlarını Sınayın"> <!ENTITY aboutTor.success.label "Tor Browser'a Hoş Geldiniz"> -<!ENTITY aboutTor.success2.label "Tor ağına bağlanın."> +<!ENTITY aboutTor.success2.label "Tor ağına bağlanıldı."> <!ENTITY aboutTor.success3.label "Artık Internet'te özgürce ve anonim olarak dolaşabilirsiniz."> <!ENTITY aboutTor.failure.label "Bir Şeyler Ters Gitti!"> <!ENTITY aboutTor.failure2.label "Tor bu tarayıcı ile çalışmıyor.">

1 0

[translation/tails-misc_completed] Update translations for tails-misc_completed
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit 0696b446a9be4bceb9b8499eb02597829e4c2ca0 Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:14 2016 +0000 Update translations for tails-misc_completed --- tr.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tr.po b/tr.po index a38f3e5..86d111b 100644 --- a/tr.po +++ b/tr.po @@ -18,15 +18,15 @@ # Tails_developers <tails(a)boum.org>, 2014 # Tails_developers <tails(a)boum.org>, 2014 # Ümit Türk <zucchinitr(a)gmail.com>, 2013 -# Volkan Gezer <volkangezer(a)gmail.com>, 2013-2015 +# Volkan Gezer <volkangezer(a)gmail.com>, 2013-2016 # Yasin Özel <iletisim(a)yasinozel.com.tr>, 2013 msgid "" msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-01-04 11:56+0100\n" -"PO-Revision-Date: 2016-01-06 10:56+0000\n" -"Last-Translator: Ozancan Karataş <ozancankaratas96(a)outlook.com>\n" +"PO-Revision-Date: 2016-01-07 20:15+0000\n" +"Last-Translator: Volkan Gezer <volkangezer(a)gmail.com>\n" "Language-Team: Turkish (http://www.transifex.com/otf/torproject/language/tr/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -40,7 +40,7 @@ msgstr "Tor hazır" #: config/chroot_local-includes/etc/NetworkManager/dispatcher.d/60-tor-ready.sh:40 msgid "You can now access the Internet." -msgstr "Artık Internet'e erişebilirsiniz." +msgstr "Artık İnternet'e erişebilirsiniz." #: config/chroot_local-includes/etc/whisperback/config.py:65 #, python-format @@ -425,7 +425,7 @@ msgid "" "Network activity within the Unsafe Browser is not anonymous.\\nOnly " "use the Unsafe Browser if necessary, for example\\nif you have to login or " "register to activate your Internet connection." -msgstr "Güvensiz Tarayıcı ile ağ etkinlikleriniz anonim değildir.\\nGüvensiz Tarayıcıyı yalnızca kullanmanız gerekiyorsa, örneğin\\nInternet bağlantınızı etkinleştirmek için kaydolmanız ya da oturum açmanız gerekiyorsa kullanın." +msgstr "Güvensiz Tarayıcı ile ağ etkinlikleriniz anonim değildir.\\nGüvensiz Tarayıcıyı yalnızca kullanmanız gerekiyorsa, örneğin\\nİnternet bağlantınızı etkinleştirmek için kaydolmanız ya da oturum açmanız gerekiyorsa kullanın." #: config/chroot_local-includes/usr/local/sbin/unsafe-browser:47 msgid "Starting the Unsafe Browser..."

1 0

[translation/tails-misc] Update translations for tails-misc
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit 16873b7dd2a4a37fdfedd892f2a522ea80285fae Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:10 2016 +0000 Update translations for tails-misc --- tr.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tr.po b/tr.po index a38f3e5..86d111b 100644 --- a/tr.po +++ b/tr.po @@ -18,15 +18,15 @@ # Tails_developers <tails(a)boum.org>, 2014 # Tails_developers <tails(a)boum.org>, 2014 # Ümit Türk <zucchinitr(a)gmail.com>, 2013 -# Volkan Gezer <volkangezer(a)gmail.com>, 2013-2015 +# Volkan Gezer <volkangezer(a)gmail.com>, 2013-2016 # Yasin Özel <iletisim(a)yasinozel.com.tr>, 2013 msgid "" msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-01-04 11:56+0100\n" -"PO-Revision-Date: 2016-01-06 10:56+0000\n" -"Last-Translator: Ozancan Karataş <ozancankaratas96(a)outlook.com>\n" +"PO-Revision-Date: 2016-01-07 20:15+0000\n" +"Last-Translator: Volkan Gezer <volkangezer(a)gmail.com>\n" "Language-Team: Turkish (http://www.transifex.com/otf/torproject/language/tr/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -40,7 +40,7 @@ msgstr "Tor hazır" #: config/chroot_local-includes/etc/NetworkManager/dispatcher.d/60-tor-ready.sh:40 msgid "You can now access the Internet." -msgstr "Artık Internet'e erişebilirsiniz." +msgstr "Artık İnternet'e erişebilirsiniz." #: config/chroot_local-includes/etc/whisperback/config.py:65 #, python-format @@ -425,7 +425,7 @@ msgid "" "Network activity within the Unsafe Browser is not anonymous.\\nOnly " "use the Unsafe Browser if necessary, for example\\nif you have to login or " "register to activate your Internet connection." -msgstr "Güvensiz Tarayıcı ile ağ etkinlikleriniz anonim değildir.\\nGüvensiz Tarayıcıyı yalnızca kullanmanız gerekiyorsa, örneğin\\nInternet bağlantınızı etkinleştirmek için kaydolmanız ya da oturum açmanız gerekiyorsa kullanın." +msgstr "Güvensiz Tarayıcı ile ağ etkinlikleriniz anonim değildir.\\nGüvensiz Tarayıcıyı yalnızca kullanmanız gerekiyorsa, örneğin\\nİnternet bağlantınızı etkinleştirmek için kaydolmanız ya da oturum açmanız gerekiyorsa kullanın." #: config/chroot_local-includes/usr/local/sbin/unsafe-browser:47 msgid "Starting the Unsafe Browser..."

1 0

[translation/tor-launcher-network-settings_completed] Update translations for tor-launcher-network-settings_completed
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit 3544fb092813273cb90549f56bd9e61e23cd1ddb Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:06 2016 +0000 Update translations for tor-launcher-network-settings_completed --- tr/network-settings.dtd | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tr/network-settings.dtd b/tr/network-settings.dtd index c37d65d..0b05f9c 100644 --- a/tr/network-settings.dtd +++ b/tr/network-settings.dtd @@ -12,7 +12,7 @@ <!ENTITY torSettings.no "Hayır"> <!ENTITY torSettings.firstQuestion "Aşağıdakilerden hangisi durumunuzu en iyi açıklıyor?"> -<!ENTITY torSettings.configurePrompt1 "Bu bilgisayarın Internet bağlantısı sansürlü ya da vekil sunucu arkasında."> +<!ENTITY torSettings.configurePrompt1 "Bu bilgisayarın İnternet bağlantısı sansürlü ya da vekil sunucu arkasında."> <!ENTITY torSettings.configurePrompt2 "Köprü ve yerel vekil sunucu ayarlarını yapmam gerekiyor."> <!ENTITY torSettings.configure "Yapılandır"> <!ENTITY torSettings.connectPrompt2 "Doğrudan Tor ağına bağlanmak istiyorum."> @@ -22,11 +22,11 @@ <!ENTITY torSettings.proxyPageTitle "Yerel Vekil Sunucu Ayarları"> <!ENTITY torSettings.proxyQuestion "Bu bilgisayarın Internet'e erişmesi için bir yerel vekil sunucu kullanması gerekiyor mu?">  -<!ENTITY torSettings.proxyHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, başka bir tarayıcıda Internet ayarlarına bakarak bir yerel vekil sunucu kullanılıp kullanılmadığını görün."> +<!ENTITY torSettings.proxyHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, başka bir tarayıcıda İnternet ayarlarına bakarak bir yerel vekil sunucu kullanılıp kullanılmadığını görün."> <!ENTITY torSettings.enterProxy "Vekil sunucu ayarlarını girin."> <!ENTITY torSettings.bridgePageTitle "Tor Köprüleri Ayarları"> -<!ENTITY torSettings.bridgeQuestion "Internet Servis Sağlayıcınız (ISS) Tor Ağına olan bağlantıları engelliyor ya da sansürlüyor mu?"> -<!ENTITY torSettings.bridgeHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, Hayır 'ı seçin. Evet'i seçerseniz, Tor Ağı bağlantılarının engellenmesini daha zor hale getiren, listelenmeyen aktarıcılar olan Tor Köprülerini ayarlamanız istenir."> +<!ENTITY torSettings.bridgeQuestion "İnternet Servis Sağlayıcınız (ISS) Tor Ağına olan bağlantıları engelliyor ya da sansürlüyor mu?"> +<!ENTITY torSettings.bridgeHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, Hayır'ı seçin.  Evet'i seçerseniz, Tor Ağı bağlantılarının engellenmesini daha zor hale getiren, listelenmeyen aktarıcılar olan Tor Köprülerini ayarlamanız istenir."> <!ENTITY torSettings.bridgeSettingsPrompt "Sağlanan köprüleri kullanabilir ya da özel köprüler edinip yazabilirsiniz.">  @@ -36,7 +36,7 @@ <!ENTITY torsettings.optional "İsteğe bağlı"> -<!ENTITY torsettings.useProxy.checkbox "Bu bilgisayarın Internet'e erişmesi için bir yerel vekil sunucu kullanması gerekiyor"> +<!ENTITY torsettings.useProxy.checkbox "Bu bilgisayarın İnternet'e erişmesi için bir yerel vekil sunucu kullanması gerekiyor"> <!ENTITY torsettings.useProxy.type "Vekil Sunucu Tipi:"> <!ENTITY torsettings.useProxy.address "Adres:"> <!ENTITY torsettings.useProxy.address.placeholder "IP adresi ya da sunucu adı"> @@ -48,7 +48,7 @@ <!ENTITY torsettings.useProxy.type.http "HTTP / HTTPS"> <!ENTITY torsettings.firewall.checkbox "Bu bilgisayar yalnız belirli bağlantı noktalarına bağlanmaya izin veren bir güvenlik duvarı kullanıyor"> <!ENTITY torsettings.firewall.allowedPorts "İzin Verilen Bağlantı Noktaları:"> -<!ENTITY torsettings.useBridges.checkbox "Internet Servis Sağlayıcım (ISS) Tor ağına olan bağlantıları engelliyor"> +<!ENTITY torsettings.useBridges.checkbox "İnternet Servis Sağlayıcım (ISS) Tor ağına olan bağlantıları engelliyor"> <!ENTITY torsettings.useBridges.default "Sağlanan köprüler ile bağlan"> <!ENTITY torsettings.useBridges.type "Aktarım tipi:"> <!ENTITY torsettings.useBridges.custom "Özel köprüler yazın"> @@ -57,7 +57,7 @@ <!ENTITY torsettings.copyLog "Tor Günlüğünü Panoya Kopyala"> <!ENTITY torsettings.bridgeHelpTitle "Köprü Aktarıcı Yardımı"> -<!ENTITY torsettings.bridgeHelp1 "Tor ağına bağlanamıyorsanız, kullandığınız Internet Servis Sağlayıcısı (ISS) ya da başka bir kurum Tor 'u engelliyor olabilir. Bu sorunu çoğunlukla, engellenmesi daha zor olan listelenmeyen aktarıcılar, Tor Köprülerini kullanarak çözebilirsiniz."> +<!ENTITY torsettings.bridgeHelp1 "Tor ağına bağlanamıyorsanız, kullandığınız İnternet Servis Sağlayıcısı (ISS) ya da başka bir kurum Tor 'u engelliyor olabilir. Bu sorunu çoğunlukla, engellenmesi daha zor olan listelenmeyen aktarıcılar, Tor Köprülerini kullanarak çözebilirsiniz."> <!ENTITY torsettings.bridgeHelp1B "Önceden ayarlanmış ve sunulmuş köprü adreslerini kullanabilir ya da şu üç yöntemden birini kullanarak özel adresler edinebilirsiniz:"> <!ENTITY torsettings.bridgeHelp2Heading "Web yoluyla"> <!ENTITY torsettings.bridgeHelp2 "Bir web tarayıcısı kullanarak https://bridges.torproject.org adresini ziyaret edin">

1 0

[translation/tor-launcher-network-settings] Update translations for tor-launcher-network-settings
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit c675a2f028c6f1a0dad3963d94c52a94cf697a1e Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:17:01 2016 +0000 Update translations for tor-launcher-network-settings --- tr/network-settings.dtd | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tr/network-settings.dtd b/tr/network-settings.dtd index c37d65d..0b05f9c 100644 --- a/tr/network-settings.dtd +++ b/tr/network-settings.dtd @@ -12,7 +12,7 @@ <!ENTITY torSettings.no "Hayır"> <!ENTITY torSettings.firstQuestion "Aşağıdakilerden hangisi durumunuzu en iyi açıklıyor?"> -<!ENTITY torSettings.configurePrompt1 "Bu bilgisayarın Internet bağlantısı sansürlü ya da vekil sunucu arkasında."> +<!ENTITY torSettings.configurePrompt1 "Bu bilgisayarın İnternet bağlantısı sansürlü ya da vekil sunucu arkasında."> <!ENTITY torSettings.configurePrompt2 "Köprü ve yerel vekil sunucu ayarlarını yapmam gerekiyor."> <!ENTITY torSettings.configure "Yapılandır"> <!ENTITY torSettings.connectPrompt2 "Doğrudan Tor ağına bağlanmak istiyorum."> @@ -22,11 +22,11 @@ <!ENTITY torSettings.proxyPageTitle "Yerel Vekil Sunucu Ayarları"> <!ENTITY torSettings.proxyQuestion "Bu bilgisayarın Internet'e erişmesi için bir yerel vekil sunucu kullanması gerekiyor mu?">  -<!ENTITY torSettings.proxyHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, başka bir tarayıcıda Internet ayarlarına bakarak bir yerel vekil sunucu kullanılıp kullanılmadığını görün."> +<!ENTITY torSettings.proxyHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, başka bir tarayıcıda İnternet ayarlarına bakarak bir yerel vekil sunucu kullanılıp kullanılmadığını görün."> <!ENTITY torSettings.enterProxy "Vekil sunucu ayarlarını girin."> <!ENTITY torSettings.bridgePageTitle "Tor Köprüleri Ayarları"> -<!ENTITY torSettings.bridgeQuestion "Internet Servis Sağlayıcınız (ISS) Tor Ağına olan bağlantıları engelliyor ya da sansürlüyor mu?"> -<!ENTITY torSettings.bridgeHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, Hayır 'ı seçin. Evet'i seçerseniz, Tor Ağı bağlantılarının engellenmesini daha zor hale getiren, listelenmeyen aktarıcılar olan Tor Köprülerini ayarlamanız istenir."> +<!ENTITY torSettings.bridgeQuestion "İnternet Servis Sağlayıcınız (ISS) Tor Ağına olan bağlantıları engelliyor ya da sansürlüyor mu?"> +<!ENTITY torSettings.bridgeHelp "Bu soruyu nasıl yanıtlayacağınızı bilmiyorsanız, Hayır'ı seçin.  Evet'i seçerseniz, Tor Ağı bağlantılarının engellenmesini daha zor hale getiren, listelenmeyen aktarıcılar olan Tor Köprülerini ayarlamanız istenir."> <!ENTITY torSettings.bridgeSettingsPrompt "Sağlanan köprüleri kullanabilir ya da özel köprüler edinip yazabilirsiniz.">  @@ -36,7 +36,7 @@ <!ENTITY torsettings.optional "İsteğe bağlı"> -<!ENTITY torsettings.useProxy.checkbox "Bu bilgisayarın Internet'e erişmesi için bir yerel vekil sunucu kullanması gerekiyor"> +<!ENTITY torsettings.useProxy.checkbox "Bu bilgisayarın İnternet'e erişmesi için bir yerel vekil sunucu kullanması gerekiyor"> <!ENTITY torsettings.useProxy.type "Vekil Sunucu Tipi:"> <!ENTITY torsettings.useProxy.address "Adres:"> <!ENTITY torsettings.useProxy.address.placeholder "IP adresi ya da sunucu adı"> @@ -48,7 +48,7 @@ <!ENTITY torsettings.useProxy.type.http "HTTP / HTTPS"> <!ENTITY torsettings.firewall.checkbox "Bu bilgisayar yalnız belirli bağlantı noktalarına bağlanmaya izin veren bir güvenlik duvarı kullanıyor"> <!ENTITY torsettings.firewall.allowedPorts "İzin Verilen Bağlantı Noktaları:"> -<!ENTITY torsettings.useBridges.checkbox "Internet Servis Sağlayıcım (ISS) Tor ağına olan bağlantıları engelliyor"> +<!ENTITY torsettings.useBridges.checkbox "İnternet Servis Sağlayıcım (ISS) Tor ağına olan bağlantıları engelliyor"> <!ENTITY torsettings.useBridges.default "Sağlanan köprüler ile bağlan"> <!ENTITY torsettings.useBridges.type "Aktarım tipi:"> <!ENTITY torsettings.useBridges.custom "Özel köprüler yazın"> @@ -57,7 +57,7 @@ <!ENTITY torsettings.copyLog "Tor Günlüğünü Panoya Kopyala"> <!ENTITY torsettings.bridgeHelpTitle "Köprü Aktarıcı Yardımı"> -<!ENTITY torsettings.bridgeHelp1 "Tor ağına bağlanamıyorsanız, kullandığınız Internet Servis Sağlayıcısı (ISS) ya da başka bir kurum Tor 'u engelliyor olabilir. Bu sorunu çoğunlukla, engellenmesi daha zor olan listelenmeyen aktarıcılar, Tor Köprülerini kullanarak çözebilirsiniz."> +<!ENTITY torsettings.bridgeHelp1 "Tor ağına bağlanamıyorsanız, kullandığınız İnternet Servis Sağlayıcısı (ISS) ya da başka bir kurum Tor 'u engelliyor olabilir. Bu sorunu çoğunlukla, engellenmesi daha zor olan listelenmeyen aktarıcılar, Tor Köprülerini kullanarak çözebilirsiniz."> <!ENTITY torsettings.bridgeHelp1B "Önceden ayarlanmış ve sunulmuş köprü adreslerini kullanabilir ya da şu üç yöntemden birini kullanarak özel adresler edinebilirsiniz:"> <!ENTITY torsettings.bridgeHelp2Heading "Web yoluyla"> <!ENTITY torsettings.bridgeHelp2 "Bir web tarayıcısı kullanarak https://bridges.torproject.org adresini ziyaret edin">

1 0

[translation/tor-launcher-properties_completed] Update translations for tor-launcher-properties_completed
by translation＠torproject.org 07 Jan '16

07 Jan '16

commit ef2a91af82c23cbec0f457725a7667e15387941a Author: Translation commit bot <translation(a)torproject.org> Date: Thu Jan 7 20:16:55 2016 +0000 Update translations for tor-launcher-properties_completed --- tr/torlauncher.properties | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tr/torlauncher.properties b/tr/torlauncher.properties index c7dac75..cbf467d 100644 --- a/tr/torlauncher.properties +++ b/tr/torlauncher.properties @@ -21,7 +21,7 @@ torlauncher.failed_to_get_settings=Tor ayarları alınamadı.\n\n%S torlauncher.failed_to_save_settings=Tor ayarları kaydedilemedi.\n\n%S torlauncher.ensure_tor_is_running=Lütfen Tor'un çalıştığından emin olun. -torlauncher.error_proxy_addr_missing=Internet'e bir vekil sunucu üzerinden bağlanmak için bir IP adresi ya da sunucu adı ile bağlantı noktası numarasının yazılması gereklidir. +torlauncher.error_proxy_addr_missing=İnternet'e bir vekil sunucu üzerinden bağlanmak için bir IP adresi ya da sunucu adı ile bağlantı noktası numarasının yazılması gereklidir. torlauncher.error_proxy_type_missing=Vekil sunucu tipini seçmelisiniz. torlauncher.error_bridges_missing=Bir ya da birkaç köprü belirtmelisiniz. torlauncher.error_default_bridges_type_missing=Sağlanan köprüler için bir aktarım tipi seçmelisiniz.

1 0