[or-cvs] r22347: {website} because functions are nice (website/trunk)
Runa Sandvik
runa.sandvik at gmail.com
Sun May 16 10:35:06 UTC 2010
Author: runa
Date: 2010-05-16 10:35:06 +0000 (Sun, 16 May 2010)
New Revision: 22347
Modified:
website/trunk/po2wml.sh
Log:
because functions are nice
Modified: website/trunk/po2wml.sh
===================================================================
--- website/trunk/po2wml.sh 2010-05-16 08:04:54 UTC (rev 22346)
+++ website/trunk/po2wml.sh 2010-05-16 10:35:06 UTC (rev 22347)
@@ -83,170 +83,112 @@
# Time to write the translated wml file.
# The translated document is written if 80% or more of the po
- # file has been translated.
- # Example: Use '-k 21' to set this number down to 21%.
-
- # The nice thing with po4a-translate is that it will only write
- # the translated document if 80% or more has been translated.
- # But it will delete the wml if less than 80% has been
+ # file has been translated. Example: Use '-k 21' to set this
+ # number down to 21%. Also, po4a-translate will only write the
+ # translated document if 80% or more has been translated.
+ # However, it will delete the wml if less than 80% has been
# translated. To avoid having our current, translated wml files
- # deleted, we first convert the po to a temp wml. If this file
- # was written, we'll rename it.
+ # deleted, convert the po to a temp wml first. If this file was
+ # actually written, rename it to wml.
- # If $onedirup is equal to $lang, that means we do not have a
- # subdirectory. Also, we don't want to convert english po back
- # to english wml.
- if [ $onedirup == $lang ]
- then
+ # Convert translations to directories such as website/nb/.
+ function nosubdir {
# The location of the english wml file
english="$wmldir/en/$wmlfile"
- # If the current subdirectory is "zh_CN" use "zh-cn" instead
- if [ $subdir = "zh_CN" ]
+ # Convert the files
+ po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/$subdir/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
+
+ # Check to see if the file was written
+ if [ -e "$wmldir/$subdir/tmp-$wmlfile" ]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/zh-cn/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
+ mv "$wmldir/$subdir/tmp-$wmlfile" "$wmldir/$subdir/$wmlfile"
- # Check to see if the file was written
- if [ -e "$wmldir/zh-cn/tmp-$wmlfile" ]
- then
- mv "$wmldir/zh-cn/tmp-$wmlfile" "$wmldir/zh-cn/$wmlfile"
+ # Remove last three lines in file
+ sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/$wmlfile"
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/zh-cn/$wmlfile"
+ # Include foot.wmi
+ echo "#include <foot.wmi>" >> "$wmldir/$subdir/$wmlfile"
+ fi
+ }
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/zh-cn/$wmlfile"
- fi
+ # Convert translations to directories such as website/torbrowser/nb/.
+ function subdir {
+ # The location of the english wml file
+ english="$wmldir/$subdir/en/$wmlfile"
+
+ # Convert the files
+ po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/$subdir/$lang/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
+
+ # Check to see if the file was written
+ if [ -e "$wmldir/$subdir/$lang/tmp-$wmlfile" ]
+ then
+ mv "$wmldir/$subdir/$lang/tmp-$wmlfile" "$wmldir/$subdir/$lang/$wmlfile"
+
+ # Remove last three lines in file
+ sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/$lang/$wmlfile"
+
+ # Include foot.wmi
+ echo "#include <foot.wmi>" >> "$wmldir/$subdir/$lang/$wmlfile"
fi
+ }
+
+ # If $onedirup is equal to $lang, that means we do not have a
+ # subdirectory.
+ if [ $onedirup == $lang ]
+ then
+ # If the current subdirectory is "zh_CN" use "zh-cn" instead
+ if [ $subdir = "zh_CN" ]
+ then
+ subdir="zh-cn"
+ nosubdir
+ fi
# If the current directory is "nb" use "no" instead
if [ $subdir = "nb" ]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/no/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
-
- # Check to see if the file was written
- if [ -e "$wmldir/no/tmp-$wmlfile" ]
- then
- mv "$wmldir/no/tmp-$wmlfile" "$wmldir/no/$wmlfile"
-
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/no/$wmlfile"
-
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/no/$wmlfile"
- fi
+ subdir="no"
+ nosubdir
fi
# If the current directory is "sv" use "se" instead
if [ $subdir = "sv" ]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/se/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
-
- # Check to see if the file was written
- if [ -e "$wmldir/se/tmp-$wmlfile" ]
- then
- mv "$wmldir/se/tmp-$wmlfile" "$wmldir/se/$wmlfile"
-
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/se/$wmlfile"
-
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/se/$wmlfile"
-
- fi
+ subdir="se"
+ nosubdir
fi
# Convert everything else
if [[ $subdir != "en" && $subdir != "zh_CN" && $subdir != "nb" && $subdir != "sv" ]]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/$subdir/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
-
- # Check to see if the file was written
- if [ -e "$wmldir/$subdir/tmp-$wmlfile" ]
- then
- mv "$wmldir/$subdir/tmp-$wmlfile" "$wmldir/$subdir/$wmlfile"
-
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/$wmlfile"
-
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/$subdir/$wmlfile"
- fi
+ nosubdir
fi
else
- # The location of the english wml file
- english="$wmldir/$subdir/en/$wmlfile"
-
# If the current language is "zh_CN" use "zh-cn" instead
if [ $lang = "zh_CN" ]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/$subdir/zh-cn/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
-
- # Check to see if the file was written
- if [ -e "$wmldir/$subdir/zh-cn/tmp-$wmlfile" ]
- then
- mv "$wmldir/$subdir/zh-cn/tmp-$wmlfile" "$wmldir/$subdir/zh-cn/$wmlfile"
-
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/zh-cn/$wmlfile"
-
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/$subdir/zh-cn/$wmlfile"
- fi
+ lang="zh-cn"
+ subdir
fi
# If the current language is "nb" use "no" instead
if [ $lang = "nb" ]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/$subdir/no/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
-
- # Check to see if the file was written
- if [ -e "$wmldir/$subdir/no/tmp-$wmlfile" ]
- then
- mv "$wmldir/$subdir/no/tmp-$wmlfile" "$wmldir/$subdir/no/$wmlfile"
-
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/no/$wmlfile"
-
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/$subdir/no/$wmlfile"
- fi
+ lang="no"
+ subdir
fi
# If the current language is "sv" use "se" instead
if [ $lang = "sv" ]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/$subdir/se/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
-
- # Check to see if the file was written
- if [ -e "$wmldir/$subdir/se/tmp-$wmlfile" ]
- then
- mv "$wmldir/$subdir/se/tmp-$wmlfile" "$wmldir/$subdir/se/$wmlfile"
-
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/se/$wmlfile"
-
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/$subdir/se/$wmlfile"
- fi
+ lang="se"
+ subdir
fi
# Convert everything else
if [[ $lang != "en" && $lang != "zh_CN" && $lang != "nb" && $lang != "sv" ]]
then
- po4a-translate -f wml -m "$english" -p "$file" -l "$wmldir/$subdir/$lang/tmp-$wmlfile" --master-charset utf-8 -L utf-8 -o customtag="$customtag" -o nodefault="$nodefault"
-
- # Check to see if the file was written
- if [ -e "$wmldir/$subdir/$lang/tmp-$wmlfile" ]
- then
- mv "$wmldir/$subdir/$lang/tmp-$wmlfile" "$wmldir/$subdir/$lang/$wmlfile"
-
- # Remove last three lines in file
- sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/$lang/$wmlfile"
-
- # Include foot.wmi
- echo "#include <foot.wmi>" >> "$wmldir/$subdir/$lang/$wmlfile"
- fi
+ subdir
fi
fi
done
More information about the tor-commits
mailing list