On 5/20/15, s7r s7r@sky-ip.org wrote:
On 5/20/2015 12:07 PM, Tor User wrote:
If I'm wrong about this, that's great - I'd love to see some documentation to explain it better if you have any links handy. But if I'm right, how can I configure our TBB clients to actually MAKE them use our TOR proxy as their entry node?
I do not see any benefits in using a Guard on your local network, I just don't see the point of it. You can do the following:
- The centralized Tor server, as explained above, means you have to
run only one Tor instance for all the computers in your network. This means you don't need Tor on all of the other computers in your network, and the entry point (Guard) needs to be defined on the Tor
I think the OP wants to treat their "centralized Tor server" as though it is a guard, which is why the term "centralized Tor server" perhaps clarifies the OP's thinking.
As you highlight, with a "centralized Tor server", a separate (local LAN) "entry guard server" doesn't make sense.
centralized server (in your case relay) only, and it will affect all the clients in the network using it. You will not be able to see circuit info (such as path) on the computers using this centralized Tor server because they won't have access to the Tor control port, which is totally normal.
The thought still lingers though - if one were to run TBB or a Tor node on each computer in a LAN, and treat the "centralized Tor server" as an "entry guard" by some manual configuration:
a) This should be doable, workable, and be just fine/ok or in fact even better than having all local/LAN computers access Tor/internet through the SOCKS proxy of the "centralized Tor server",
b) It should be possible to set up such a configuration manually - force the "centralized Tor server" to be "my" (random LAN PC with tor instance eg TBB) entry guard to the Tor network, even though it does NOT have the guard relay, assuming I am the LAN admin, or that I trust the LAN admin,
c) It should be better for security of each LAN PC - since they are sort of participating natively in the Tor network, since they begin their own hop in/at their local PC, and so don't have to rely nearly so much on the LAN admin and the SOCKS proxy running on that "centralized Tor server" - is getting from my PC to a SOCKS proxy on some other PC even secure at all, or is some other security layer now needed to protect/hide agains LAN eavesdroppers?,
d) Because each LAN PC has its own tor node (eg TBB with manual config), they can see their full circuits in the wider Tor network - with all circuits always beginning at the (manually configured) "centralized Tor server configured as my permanent Tor network entry guard node",
e) TBB "just works" from a "all the various Tor project customizations for Firefox are baked in, it's much harder for me to f*** it up somehow" - and I think this is one of the most critically important benefits that should not be so readily discarded with:
On the computers in your network you can just use Firefox with some privacy plugins and route all traffic (including DNS) through the polipo proxy, running on the Tor centralized server / relay.
since "just install some privacy plugins and route DNS through SOCKS/polipo" can so easily fail big time!
If there's any chance of adversarial eavesdropping or browser attacks, surely you want to start from a "just works as far as most Tor devs are aware within the known limits etc" position, and add the minimal browser config/ manual Tor config on top of that?
What happens when a TBB security fix comes out - does one assume that normal firefox does not need that? Does one assume that a normal firefox upgrade, in the face of the full set of manual "TBB like" customizations (assuming you even implemented them all, and implemented them all correctly) and that you do -not- need to do a full firefox reinstall?
There are SO many unanswered security questions for an end user (or LAN admin trying to be responsible on behalf of their LAN PC users) that I feel it is dangerous to suggest something other than "use TBB, with absolute minimal manual config on top, e.g. disable Javascript :)"!
...
Want a centralized Tor server and a Guard relay at the same time? Just run the relay someplace else, and use StrictNodes and EntryNode on that server. I doubt this is what you want since you installed Tor Browser on the computers in the network as well.
TBB, albeit with some (hopefully minimal) manual customizations, ought be "the recommended way" by my reasoning... the only question is how to achieve a sane setup, optimizing for a particular scenario - in this case, the OP is optimizing for a LAN environment in which it appears that the OP may be the admin, and therefore that the OP has a certain trust in him/her self :)
It might, just possibly, also be the case that other individuals who use that LAN environment, place some level of trust in their LAN admin too.
In the face of even a minimal level of additional trust which is not ordinarily available to Joe Random Home User, surely it is sensible to try to leverage that additional trust in order to maximise "security (by some definition)"?
And here, I feel, is the crux of both a dilemma, and an opportunity, which is highlighted by the OP, and which Tor network has failed to confront or take advantage of - actual available trust in a particular node operator (in this case the OP's "centralized Tor server").
Perhaps the old vidalia (?) setup where there was a separate gui for TBB's Tor networking side did provide a mechanism for end users to take advantage of such "additional available trust"? Before my time sorry.
...
You can run a centralized Tor server with polipo and a Tor relay on the same server, but that Tor client
"that Tor client" is ambiguous to me and I can't figure out what you mean - if you think it's useful, please clarify what you meant by "that Tor client".
cannot use its relay functionality running on the same machine as the first hop.
- Disable the polipo proxy on your Tor relay, you do not need that.
I agree with this. Tor server (relay/"centralized Tor server"/"faux Tor entry guard") provides a SOCKS proxy built in - I see only disadvantages to adding an unnecessary additional proxy layer.
Use Tor Browser on every computer in your network with normal settings, no proxy setup, just direct connection
By "direct connection" do you mean "direct/normal automatic connection to the Tor network"?
and StrictNodes and EntryNode $fingerprint-of-your-relay.
Ahah! This sounds like what the OP is after - what I term above as "faux Tor entry guard".
For this, your relay needs the Guard flag.
Oh. Dang.
So what's wrong with having: EntryNode $cntrlzd-faux-guard-relay-fingerprint ForceEntryNodeIfNoGuardFlag true
???
If you are behind NAT, it will use the public IP to connect to the relay on your network since that is what your Tor client(s) will understand from the consensus data file.
What's wrong with the fingerprint? Surely this is some sort of public key verifiable fingerprint, crypto 101 right?
In other words:
EntryNode $cntrlzd-faux-guard-relay-fingerprint ForceEntryNodeIfNoGuardFlag true EntryNodeAddress 192.168.1.207
???
(I'm not asking why doesn't it work now, since these additional options probably don't exist in Tor yet - I'm asking -why- such options are not a good idea in these circumstances and why this ought not be permitted at all.)
- Disable the polipo proxy on the Tor relay in your network, you do
not need that. Run a bridge instead of a relay. Make it a non public bride (PublishServerDescriptor 0) and run Tor Browser on all the computers in your network with UseBridges 1 and define the ip:port of your bridge and connect it directly, no proxy setting. This way other 'strangers' won't be able to use your bridge and you will also not need the Guard flag or uptime and bandwidth requirements.
Sounds like another "ahah!" moment - perhaps this is finally the answer to OP's need.
Hope this helps.
That last bit (UseBridges 1, configure bridge IP), looks like it does the job needed here, no new Tor config options required.
If you don't understand something, please ask again, it's important for you to understand what you are doing not just follow instructions.
ACK. I too want to understand, which makes at least 2 people :)
Regards, Zenaan