still "hibernating", BUT ... bandwidth went up like crazy !
2014-10-11 2:57 GMT-04:00 Blaise Gagnon quebecfibe@gmail.com:
and ... what is "hibernating" ?
2014-10-11 2:55 GMT-04:00 Blaise Gagnon quebecfibe@gmail.com:
OK I've set MaxAdvertisedBandwidth, but I did set it in the past, with no
results ....
Anything else beside running multiple relays ?
Many many thanks again !
2014-10-11 2:48 GMT-04:00 Matthew Finkel matthew.finkel@gmail.com:
On Sat, Oct 11, 2014 at 02:05:24AM -0400, Blaise Gagnon wrote:
Hi and many thanks for developping this project !
I have a dedicated 200Mb (25 MB) fiber optics connection and a
dedicated
quad-core Linux server (64). What is the best setup to get maximum bandwidth usage ? I'm still stuck at 46.4Kb measured speed and 3,51MB advertised bandwidth. The server has direct connection to the Internet.
Fingerprint : 5EF740BB88C75915F8316DFEC8F1C8631FF26F12
Hi Blaise,
Thanks for running a relay!
It looks like you're currently peaking at a little over 2MB (with a mean of ~1MB)[0][1].
I also see that the relay is currently hibernating. This will certainly impact the amount of bandwidth you use. Did you configure MaxAdvertisedBandwidth?
Below is what the network knows about your relay (with some irrelevant details removed).
$ curl https://onionoo.torproject.org/details?fingerprint=5EF740BB88C75915F8316DFEC... { "version":"1.1", "relays_published":"2014-10-11 05:00:00", "relays":[ { "nickname":"QuebecFibe", "fingerprint":"5EF740BB88C75915F8316DFEC8F1C8631FF26F12", [...] "last_seen":"2014-10-11 06:00:00", "last_changed_address_or_port":"2014-10-07 07:00:00", "first_seen":"2014-07-17 17:00:00", "running":true, "flags":["Fast","Running","V2Dir","Valid"], [...] "consensus_weight":5950, "host_name":"69.159.127.80", "last_restarted":"2014-10-08 06:31:26", "bandwidth_rate":26214400, "bandwidth_burst":26214400, "observed_bandwidth":3512594, "advertised_bandwidth":3512594, "exit_policy":["reject *:*"], "exit_policy_summary":{"reject":["1-65535"]}, [...] "advertised_bandwidth_fraction":2.777751E-4, "consensus_weight_fraction":2.4263727E-4, "guard_probability":0.0, "middle_probability":7.2791905E-4, "exit_probability":0.0, "recommended_version":true, "hibernating":true} ], [...] ]}
[0] https://globe.torproject.org/#/relay/5EF740BB88C75915F8316DFEC8F1C8631FF26F1... [1] https://atlas.torproject.org/#details/5EF740BB88C75915F8316DFEC8F1C8631FF26F...
Should I run multiple relays on the same machine/IP ?
You can, and it may help, but there may be a simpler problem that can be fixed here.
- Matt
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays