On 4 Sep 2016, at 04:35, Farid Joubbi joubbi@kth.se wrote:
It seems as if Cpu1 is almost idle most of the time. Cpu0 is somewhere between 5 and 20. This is a rather high snapshot:
%Cpu0 : 17.2 us, 2.0 sy, 0.0 ni, 79.5 id, 0.0 wa, 0.0 hi, 1.3 si, 0.0 st %Cpu1 : 2.4 us, 0.3 sy, 0.0 ni, 97.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
I have had the guard flag before. Maybe I lost it since I rebooted twice and changed ISP a bit more than a week ago.
The IP address does not change unless I reboot or release the current address manually
I used to have 250Mbit/s downstream and 10Mbit/s up with my old ISP.
How does the algorithm that checks the bandwidth work?
Your relay reports a bandwidth based on the amount of traffic it has sustained in any 10 second period over the past day. You can also set a maximum advertised bandwidth on your relay. (Don't do this if you're trying to pick up more traffic.) Five bandwidth authorities measure each relay each week, and report how fast it is. Each of these factors can restrict the amount of bandwidth that the network assigns to your relay.
Here's one way of testing what your relay is capable of:
Run a Tor client as close to your relay as possible: tor DataDirectory /tmp/tor.$$ SOCKSPort [IPv4:]10000 EntryNodes your-relay-name
Then download a large file using port 10000 as a socks proxy.
That will give you some idea of how much traffic your relay can sustain, but it's worth noting that each client is limited to about 1 Mbps (I think - I can't find the manual page entry).
Tim
Does anyone else reading this run a Banana Pro, Raspberry or similar hardware with better results than me?
Regards, Farid
From: Roman Mamedov rm@romanrm.net Sent: 03 September 2016 17:14 To: Aeris Cc: Farid Joubbi; tor-relays@lists.torproject.org Subject: Re: [tor-relays] Why can't I see more traffic? (is my banana too weak?)
On Sat, 03 Sep 2016 16:53:25 +0200 Aeris aeris+tor@imirhil.fr wrote:
Could it be that it is due to the quite slow hardware, even though I know that it is able to push more traffic?
Yep, surely.
You currently push 3Mbps of traffic, which is correct for this kind of hardware. All "cheap" hardware (raspi, banana, olimex, pine…) suffer of the fact they don’t have crypto hardware acceleration and do software encryption. And so is very slow (10-100× factor) even compared to low end amd64 CPU with AES-NI extension.
According to 'openssl speed aes-128-cbc' the Allwinner A20 CPU in Banana Pro is capable of about 25 MBytes/sec in AES performance. While that won't translate 1:1 into Tor performance, as Farid noted in his case the CPU isn't being a bottleneck, with only 10-20% CPU load observed.
@Farid,
According to top the CPU hovers around 10-20% most of the time.
I wonder is it 20% across both cores, which could be 40% of one core (since Tor is not multithreaded enough), and at least somewhat closer to not being practically idle. Can you launch 'top' and press '1' there to check?
Also seems unclear why it didn't get the guard flag for so long, does your public IP address change from time to time? Or do you turn the relay off and on for whatever reason.
-- With respect, Roman _______________________________________________ tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Tim Wilson-Brown (teor)
teor2345 at gmail dot com PGP C855 6CED 5D90 A0C5 29F6 4D43 450C BA7F 968F 094B ricochet:ekmygaiu4rzgsk6n xmpp: teor at torproject dot org