Here info about netconfig. In the INFO messages is a part of 'Could not get local interface IP address." A mystical thing.
root@localhost:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:16:03:e5:d6:a0 brd ff:ff:ff:ff:ff:ff altname enp0s3 altname ens3 inet 107.189.14.123/24 brd 107.189.14.255 scope global dynamic eth0 valid_lft 2583814sec preferred_lft 2583814sec root@localhost:~#
Am 12.02.22 um 20:43 schrieb Olaf Grimm:
Hello Tor community!
I have some identical new relays, but only one of them has a problem. My intention was an IPv6 problem, so there ist IPV6 diabled at all.
Fingerprint: 3F1AE2170CAD31B5694BD9052A2A29E5793BDC1F IP: 107.189.14.123
Ports open: 22, 80, 9001
Test from outside by scanner: ok UFW firewall open ports set to: 22, 80, 9001
torrc: No IPv6 configuration enabled.
The same configuration about all relays.
With Nyx I can see built circuits, but the relay does not appear in the metrics, but other relays already show strong traffic.
Debian system updates are possible, the HTTP frontpage is displayed at the given IP address, DNS 'unbound' ok because updates are possible. Unbound is set to 127.0.0.1 only.
Here some logs from Nyx (copy like displayed):
11:18:41 [INFO] find_my_address(): Unable to find our IP address.
11:18:41 [INFO] address_can_be_used(): Address '::1' is a private IP address. Tor relays that use the default DirAuthorities must have public IP addresses.
11:18:41 [INFO] tor_getaddrinfo(): (Sandbox) getaddrinfo succeeded.
11:18:41 [INFO] get_address_from_interface(): Could not get local interface IP address.
11:18:41 [INFO] get_interface_address6_via_udp_socket_hack(): connect() failed: Cannot assign requested address
11:18:41 [INFO] address_can_be_used(): Address '::' is a private IP address. Tor relays that use the default DirAuthorities must have public IP addresses.
11:18:41 [INFO] get_address_from_config(): No Address option found in configuration.
11:18:39 [INFO] update_consensus_router_descriptor_downloads(): 0 router descriptors downloadable. 0 delayed; 6795 present (0 of those were in old_routers); 0 would_reject; 0 wouldnt_use; 0 in progress.
I can not find what is wrong, but I see "::" what is IPv6. In Debian /etc/sysctl.conf IPv6 is disabled.
net.ipv6.conf.all.disable_ipv6 = 1
Can you help me? Please check the IP in the consensus. Blocked?
Olaf