commit 9cd39bbc7dd073af5b86485bf0a074ff01e9b4c8 Author: Erinn Clark erinn@torproject.org Date: Thu Mar 24 12:29:41 2011 +0100

add firefox 3.6 patch --- .../non-blocking-socks-firefox-3.6.patch | 1637 ++++++++++++++++++++ 1 files changed, 1637 insertions(+), 0 deletions(-)

diff --git a/src/current-patches/non-blocking-socks-firefox-3.6.patch b/src/current-patches/non-blocking-socks-firefox-3.6.patch new file mode 100644 index 0000000..fd24905 --- /dev/null +++ b/src/current-patches/non-blocking-socks-firefox-3.6.patch @@ -0,0 +1,1637 @@ +--- a/netwerk/base/src/nsSocketTransport2.cpp ++++ a/netwerk/base/src/nsSocketTransport2.cpp +@@ -1222,16 +1222,26 @@ nsSocketTransport::InitiateSocket() + // connection... wouldn't we need to call ProxyStartSSL after a call + // to PR_ConnectContinue indicates that we are connected? + // + // XXX this appears to be what the old socket transport did. why + // isn't this broken? + } + } + // ++ // A SOCKS request was rejected; get the actual error code from ++ // the OS error ++ // ++ else if (PR_UNKNOWN_ERROR == code && ++ mProxyTransparent && ++ !mProxyHost.IsEmpty()) { ++ code = PR_GetOSError(); ++ rv = ErrorAccordingToNSPR(code); ++ } ++ // + // The connection was refused... + // + else { + rv = ErrorAccordingToNSPR(code); + if ((rv == NS_ERROR_CONNECTION_REFUSED) && !mProxyHost.IsEmpty()) + rv = NS_ERROR_PROXY_CONNECTION_REFUSED; + } + } +@@ -1544,17 +1554,26 @@ nsSocketTransport::OnSocketReady(PRFileD + // + // If the connect is still not ready, then continue polling... + // + if ((PR_WOULD_BLOCK_ERROR == code) || (PR_IN_PROGRESS_ERROR == code)) { + // Set up the select flags for connect... + mPollFlags = (PR_POLL_EXCEPT | PR_POLL_WRITE); + // Update poll timeout in case it was changed + mPollTimeout = mTimeouts[TIMEOUT_CONNECT]; +- } ++ } ++ // ++ // The SOCKS proxy rejected our request. Find out why. ++ // ++ else if (PR_UNKNOWN_ERROR == code && ++ mProxyTransparent && ++ !mProxyHost.IsEmpty()) { ++ code = PR_GetOSError(); ++ mCondition = ErrorAccordingToNSPR(code); ++ } + else { + // + // else, the connection failed... + // + mCondition = ErrorAccordingToNSPR(code); + if ((mCondition == NS_ERROR_CONNECTION_REFUSED) && !mProxyHost.IsEmpty()) + mCondition = NS_ERROR_PROXY_CONNECTION_REFUSED; + SOCKET_LOG((" connection failed! [reason=%x]\n", mCondition)); +--- a/netwerk/socket/base/nsSOCKSIOLayer.cpp ++++ a/netwerk/socket/base/nsSOCKSIOLayer.cpp +@@ -20,16 +20,17 @@ + * Portions created by the Initial Developer are Copyright (C) 1998 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * Justin Bradford jab@atdot.org + * Bradley Baetz bbaetz@acm.org + * Darin Fisher darin@meer.net + * Malcolm Smith malsmith@cs.rmit.edu.au ++ * Christopher Davis chrisd@torproject.org + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your +@@ -63,51 +64,115 @@ static PRLogModuleInfo *gSOCKSLog; + + #else + #define LOGDEBUG(args) + #define LOGERROR(args) + #endif + + class nsSOCKSSocketInfo : public nsISOCKSSocketInfo + { ++ enum State { ++ SOCKS_INITIAL, ++ SOCKS_CONNECTING_TO_PROXY, ++ SOCKS4_WRITE_CONNECT_REQUEST, ++ SOCKS4_READ_CONNECT_RESPONSE, ++ SOCKS5_WRITE_AUTH_REQUEST, ++ SOCKS5_READ_AUTH_RESPONSE, ++ SOCKS5_WRITE_CONNECT_REQUEST, ++ SOCKS5_READ_CONNECT_RESPONSE_TOP, ++ SOCKS5_READ_CONNECT_RESPONSE_BOTTOM, ++ SOCKS_CONNECTED, ++ SOCKS_FAILED ++ }; ++ ++ // A buffer of 262 bytes should be enough for any request and response ++ // in case of SOCKS4 as well as SOCKS5 ++ static const PRUint32 BUFFER_SIZE = 262; ++ static const PRUint32 MAX_HOSTNAME_LEN = 255; ++ + public: + nsSOCKSSocketInfo(); +- virtual ~nsSOCKSSocketInfo() {} ++ virtual ~nsSOCKSSocketInfo() { HandshakeFinished(); } + + NS_DECL_ISUPPORTS + NS_DECL_NSISOCKSSOCKETINFO + + void Init(PRInt32 version, + const char *proxyHost, + PRInt32 proxyPort, + const char *destinationHost, + PRUint32 flags); + +- const nsCString &DestinationHost() { return mDestinationHost; } +- const nsCString &ProxyHost() { return mProxyHost; } +- PRInt32 ProxyPort() { return mProxyPort; } +- PRInt32 Version() { return mVersion; } +- PRUint32 Flags() { return mFlags; } ++ void SetConnectTimeout(PRIntervalTime to); ++ PRStatus DoHandshake(PRFileDesc *fd, PRInt16 oflags = -1); ++ PRInt16 GetPollFlags() const; ++ bool IsConnected() const { return mState == SOCKS_CONNECTED; } + + private: ++ void HandshakeFinished(PRErrorCode err = 0); ++ PRStatus ConnectToProxy(PRFileDesc *fd); ++ PRStatus ContinueConnectingToProxy(PRFileDesc *fd, PRInt16 oflags); ++ PRStatus WriteV4ConnectRequest(); ++ PRStatus ReadV4ConnectResponse(); ++ PRStatus WriteV5AuthRequest(); ++ PRStatus ReadV5AuthResponse(); ++ PRStatus WriteV5ConnectRequest(); ++ PRStatus ReadV5AddrTypeAndLength(PRUint8 *type, PRUint32 *len); ++ PRStatus ReadV5ConnectResponseTop(); ++ PRStatus ReadV5ConnectResponseBottom(); ++ ++ void WriteUint8(PRUint8 d); ++ void WriteUint16(PRUint16 d); ++ void WriteUint32(PRUint32 d); ++ void WriteNetAddr(const PRNetAddr *addr); ++ void WriteNetPort(const PRNetAddr *addr); ++ void WriteString(const nsACString &str); ++ ++ PRUint8 ReadUint8(); ++ PRUint16 ReadUint16(); ++ PRUint32 ReadUint32(); ++ void ReadNetAddr(PRNetAddr *addr, PRUint16 fam); ++ void ReadNetPort(PRNetAddr *addr); ++ ++ void WantRead(PRUint32 sz); ++ PRStatus ReadFromSocket(PRFileDesc *fd); ++ PRStatus WriteToSocket(PRFileDesc *fd); ++ ++private: ++ State mState; ++ PRUint8 * mData; ++ PRUint8 * mDataIoPtr; ++ PRUint32 mDataLength; ++ PRUint32 mReadOffset; ++ PRUint32 mAmountToRead; ++ nsCOMPtr<nsIDNSRecord> mDnsRec; ++ + nsCString mDestinationHost; + nsCString mProxyHost; + PRInt32 mProxyPort; + PRInt32 mVersion; // SOCKS version 4 or 5 + PRUint32 mFlags; + PRNetAddr mInternalProxyAddr; + PRNetAddr mExternalProxyAddr; + PRNetAddr mDestinationAddr; ++ PRIntervalTime mTimeout; + }; + + nsSOCKSSocketInfo::nsSOCKSSocketInfo() +- : mProxyPort(-1) ++ : mState(SOCKS_INITIAL) ++ , mDataIoPtr(nsnull) ++ , mDataLength(0) ++ , mReadOffset(0) ++ , mAmountToRead(0) ++ , mProxyPort(-1) + , mVersion(-1) + , mFlags(0) ++ , mTimeout(PR_INTERVAL_NO_TIMEOUT) + { ++ mData = new PRUint8[BUFFER_SIZE]; + PR_InitializeNetAddr(PR_IpAddrAny, 0, &mInternalProxyAddr); + PR_InitializeNetAddr(PR_IpAddrAny, 0, &mExternalProxyAddr); + PR_InitializeNetAddr(PR_IpAddrAny, 0, &mDestinationAddr); + } + + void + nsSOCKSSocketInfo::Init(PRInt32 version, const char *proxyHost, PRInt32 proxyPort, const char *host, PRUint32 flags) + { +@@ -157,647 +222,817 @@ nsSOCKSSocketInfo::GetInternalProxyAddr( + + NS_IMETHODIMP + nsSOCKSSocketInfo::SetInternalProxyAddr(PRNetAddr *aInternalProxyAddr) + { + memcpy(&mInternalProxyAddr, aInternalProxyAddr, sizeof(PRNetAddr)); + return NS_OK; + } + +-static PRInt32 +-pr_RecvAll(PRFileDesc *fd, unsigned char *buf, PRInt32 amount, PRIntn flags, +- PRIntervalTime *timeout) ++// There needs to be a means of distinguishing between connection errors ++// that the SOCKS server reports when it rejects a connection request, and ++// connection errors that happen while attempting to connect to the SOCKS ++// server. Otherwise, Firefox will report incorrectly that the proxy server ++// is refusing connections when a SOCKS request is rejected by the proxy. ++// When a SOCKS handshake failure occurs, the PR error is set to ++// PR_UNKNOWN_ERROR, and the real error code is returned via the OS error. ++void ++nsSOCKSSocketInfo::HandshakeFinished(PRErrorCode err) + { +- PRInt32 bytesRead = 0; +- PRInt32 offset = 0; ++ if (err == 0) { ++ mState = SOCKS_CONNECTED; ++ } else { ++ mState = SOCKS_FAILED; ++ PR_SetError(PR_UNKNOWN_ERROR, err); ++ } + +- while (offset < amount) { +- PRIntervalTime start_time = PR_IntervalNow(); +- bytesRead = PR_Recv(fd, buf + offset, amount - offset, flags, *timeout); +- PRIntervalTime elapsed = PR_IntervalNow() - start_time; +- +- if (elapsed > *timeout) { +- *timeout = 0; +- } else { +- *timeout -= elapsed; +- } +- +- if (bytesRead > 0) { +- offset += bytesRead; +- } else if (bytesRead == 0 || offset != 0) { +- return offset; +- } else { +- return bytesRead; +- } +- +- if (*timeout == 0) { +- LOGERROR(("PR_Recv() timed out. amount = %d. offset = %d.", +- amount, offset)); +- return offset; +- } +- } +- return offset; ++ // We don't need the buffer any longer, so free it. ++ delete [] mData; ++ mData = nsnull; ++ mDataIoPtr = nsnull; ++ mDataLength = 0; ++ mReadOffset = 0; ++ mAmountToRead = 0; + } + +-static PRInt32 +-pr_Send(PRFileDesc *fd, const void *buf, PRInt32 amount, PRIntn flags, +- PRIntervalTime *timeout) ++PRStatus ++nsSOCKSSocketInfo::ConnectToProxy(PRFileDesc *fd) + { +- PRIntervalTime start_time = PR_IntervalNow(); +- PRInt32 retval = PR_Send(fd, buf, amount, flags, *timeout); +- PRIntervalTime elapsed = PR_IntervalNow() - start_time; ++ PRStatus status; ++ nsresult rv; + +- if (elapsed > *timeout) { +- *timeout = 0; +- LOGERROR(("PR_Send() timed out. amount = %d. retval = %d.", +- amount, retval)); +- return retval; +- } else { +- *timeout -= elapsed; +- } ++ NS_ABORT_IF_FALSE(mState == SOCKS_INITIAL, ++ "Must be in initial state to make connection!"); + +- if (retval <= 0) { +- LOGERROR(("PR_Send() failed. amount = %d. retval = %d.", +- amount, retval)); +- } ++ // If we haven't performed the DNS lookup, do that now. ++ if (!mDnsRec) { ++ nsCOMPtr<nsIDNSService> dns = do_GetService(NS_DNSSERVICE_CONTRACTID); ++ if (!dns) ++ return PR_FAILURE; + +- return retval; +-} +- +-// Negotiate a SOCKS 5 connection. Assumes the TCP connection to the socks +-// server port has been established. +-static nsresult +-ConnectSOCKS5(PRFileDesc *fd, const PRNetAddr *addr, PRNetAddr *extAddr, PRIntervalTime timeout) +-{ +- int request_len = 0; +- int response_len = 0; +- int desired_len = 0; +- unsigned char request[22]; +- unsigned char response[262]; +- +- NS_ENSURE_TRUE(fd, NS_ERROR_NOT_INITIALIZED); +- NS_ENSURE_TRUE(addr, NS_ERROR_NOT_INITIALIZED); +- NS_ENSURE_TRUE(extAddr, NS_ERROR_NOT_INITIALIZED); +- +- request[0] = 0x05; // SOCKS version 5 +- request[1] = 0x01; // number of auth procotols we recognize +- // auth protocols +- request[2] = 0x00; // no authentication required +- // compliant implementations MUST implement GSSAPI +- // and SHOULD implement username/password and MAY +- // implement CHAP +- // TODO: we don't implement these +- //request[3] = 0x01; // GSSAPI +- //request[4] = 0x02; // username/password +- //request[5] = 0x03; // CHAP +- +- request_len = 2 + request[1]; +- int write_len = pr_Send(fd, request, request_len, 0, &timeout); +- if (write_len != request_len) { +- return NS_ERROR_FAILURE; +- } +- +- // get the server's response. +- desired_len = 2; +- response_len = pr_RecvAll(fd, response, desired_len, 0, &timeout); +- +- if (response_len < desired_len) { +- LOGERROR(("pr_RecvAll() failed. response_len = %d.", response_len)); +- return NS_ERROR_FAILURE; +- } +- +- if (response[0] != 0x05) { +- // it's a either not SOCKS or not our version +- LOGERROR(("Not a SOCKS 5 reply. Expected: 5; received: %x", response[0])); +- return NS_ERROR_FAILURE; +- } +- switch (response[1]) { +- case 0x00: +- // no auth +- break; +- case 0x01: +- // GSSAPI +- // TODO: implement +- LOGERROR(("Server want to use GSSAPI to authenticate, but we don't support it.")); +- return NS_ERROR_FAILURE; +- case 0x02: +- // username/password +- // TODO: implement +- LOGERROR(("Server want to use username/password to authenticate, but we don't support it.")); +- return NS_ERROR_FAILURE; +- case 0x03: +- // CHAP +- // TODO: implement? +- LOGERROR(("Server want to use CHAP to authenticate, but we don't support it.")); +- return NS_ERROR_FAILURE; +- default: +- // unrecognized auth method +- LOGERROR(("Uncrecognized authentication method received: %x", response[1])); +- return NS_ERROR_FAILURE; +- } +- +- // we are now authenticated, so lets tell +- // the server where to connect to +- +- request_len = 0; +- +- request[0] = 0x05; // SOCKS version 5 +- request[1] = 0x01; // CONNECT command +- request[2] = 0x00; // obligatory reserved field (perfect for MS tampering!) +- +- // get destination port +- PRInt32 destPort = PR_ntohs(PR_NetAddrInetPort(addr)); +- nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret; +- +- if (info->Flags() & nsISocketProvider::PROXY_RESOLVES_HOST) { +- +- LOGDEBUG(("using server to resolve hostnames rather than resolving it first\n")); +- +- // if the PROXY_RESOLVES_HOST flag is set, we assume +- // that the transport wants us to pass the SOCKS server the +- // hostname and port and let it do the name resolution. +- +- // the real destination hostname and port was stored +- // in our info object earlier when this layer was created. +- +- const nsCString& destHost = info->DestinationHost(); +- +- LOGDEBUG(("host:port -> %s:%li", destHost.get(), destPort)); +- +- request[3] = 0x03; // encoding of destination address (3 == hostname) +- +- int host_len = destHost.Length(); +- if (host_len > 255) { +- // SOCKS5 transmits the length of the hostname in a single char. +- // This gives us an absolute limit of 255 chars in a hostname, and +- // there's nothing we can do to extend it. I don't think many +- // hostnames will ever be bigger than this, so hopefully it's an +- // uneventful abort condition. +- LOGERROR (("Hostname too big for SOCKS5.")); +- return NS_ERROR_INVALID_ARG; +- } +- request[4] = (char) host_len; +- request_len = 5; +- +- // Send the initial header first... +- write_len = pr_Send(fd, request, request_len, 0, &timeout); +- if (write_len != request_len) { +- // bad write +- return NS_ERROR_FAILURE; +- } +- +- // Now send the hostname... +- write_len = pr_Send(fd, destHost.get(), host_len, 0, &timeout); +- if (write_len != host_len) { +- // bad write +- return NS_ERROR_FAILURE; +- } +- +- // There's no data left because we just sent it. +- request_len = 0; +- +- } else if (PR_NetAddrFamily(addr) == PR_AF_INET) { +- +- request[3] = 0x01; // encoding of destination address (1 == IPv4) +- request_len = 8; // 4 for address, 4 SOCKS headers +- +- char * ip = (char*)(&addr->inet.ip); +- request[4] = *ip++; +- request[5] = *ip++; +- request[6] = *ip++; +- request[7] = *ip++; +- +- } else if (PR_NetAddrFamily(addr) == PR_AF_INET6) { +- +- request[3] = 0x04; // encoding of destination address (4 == IPv6) +- request_len = 20; // 16 for address, 4 SOCKS headers +- +- char * ip = (char*)(&addr->ipv6.ip.pr_s6_addr); +- request[4] = *ip++; request[5] = *ip++; +- request[6] = *ip++; request[7] = *ip++; +- request[8] = *ip++; request[9] = *ip++; +- request[10] = *ip++; request[11] = *ip++; +- request[12] = *ip++; request[13] = *ip++; +- request[14] = *ip++; request[15] = *ip++; +- request[16] = *ip++; request[17] = *ip++; +- request[18] = *ip++; request[19] = *ip++; +- +- // we're going to test to see if this address can +- // be mapped back into IPv4 without loss. if so, +- // we'll use IPv4 instead, as reliable SOCKS server +- // support for IPv6 is probably questionable. +- +- if (PR_IsNetAddrType(addr, PR_IpAddrV4Mapped)) { +- request[3] = 0x01; // ipv4 encoding +- request[4] = request[16]; +- request[5] = request[17]; +- request[6] = request[18]; +- request[7] = request[19]; +- request_len -= 12; +- } +- } else { +- // Unknown address type +- LOGERROR(("Don't know what kind of IP address this is.")); +- return NS_ERROR_FAILURE; +- } +- +- // add the destination port to the request +- request[request_len] = (unsigned char)(destPort >> 8); +- request[request_len+1] = (unsigned char)destPort; +- request_len += 2; +- +- write_len = pr_Send(fd, request, request_len, 0, &timeout); +- if (write_len != request_len) { +- // bad write +- return NS_ERROR_FAILURE; +- } +- +- desired_len = 5; +- response_len = pr_RecvAll(fd, response, desired_len, 0, &timeout); +- if (response_len < desired_len) { // bad read +- LOGERROR(("pr_RecvAll() failed getting connect command reply. response_len = %d.", response_len)); +- return NS_ERROR_FAILURE; +- } +- +- if (response[0] != 0x05) { +- // bad response +- LOGERROR(("Not a SOCKS 5 reply. Expected: 5; received: %x", response[0])); +- return NS_ERROR_FAILURE; +- } +- +- switch(response[1]) { +- case 0x00: break; // success +- case 0x01: LOGERROR(("SOCKS 5 server rejected connect request: 01, General SOCKS server failure.")); +- return NS_ERROR_FAILURE; +- case 0x02: LOGERROR(("SOCKS 5 server rejected connect request: 02, Connection not allowed by ruleset.")); +- return NS_ERROR_FAILURE; +- case 0x03: LOGERROR(("SOCKS 5 server rejected connect request: 03, Network unreachable.")); +- return NS_ERROR_FAILURE; +- case 0x04: LOGERROR(("SOCKS 5 server rejected connect request: 04, Host unreachable.")); +- return NS_ERROR_FAILURE; +- case 0x05: LOGERROR(("SOCKS 5 server rejected connect request: 05, Connection refused.")); +- return NS_ERROR_FAILURE; +- case 0x06: LOGERROR(("SOCKS 5 server rejected connect request: 06, TTL expired.")); +- return NS_ERROR_FAILURE; +- case 0x07: LOGERROR(("SOCKS 5 server rejected connect request: 07, Command not supported.")); +- return NS_ERROR_FAILURE; +- case 0x08: LOGERROR(("SOCKS 5 server rejected connect request: 08, Address type not supported.")); +- return NS_ERROR_FAILURE; +- default: LOGERROR(("SOCKS 5 server rejected connect request: %x.", response[1])); +- return NS_ERROR_FAILURE; +- +- +- } +- +- switch (response[3]) { +- case 0x01: // IPv4 +- desired_len = 4 + 2 - 1; +- break; +- case 0x03: // FQDN +- desired_len = response[4] + 2; +- break; +- case 0x04: // IPv6 +- desired_len = 16 + 2 - 1; +- break; +- default: // unknown format +- return NS_ERROR_FAILURE; +- break; +- } +- response_len = pr_RecvAll(fd, response + 5, desired_len, 0, &timeout); +- if (response_len < desired_len) { // bad read +- LOGERROR(("pr_RecvAll() failed getting connect command reply. response_len = %d.", response_len)); +- return NS_ERROR_FAILURE; +- } +- response_len += 5; +- +- // get external bound address (this is what +- // the outside world sees as "us") +- char *ip = nsnull; +- PRUint16 extPort = 0; +- +- switch (response[3]) { +- case 0x01: // IPv4 +- +- extPort = (response[8] << 8) | response[9]; +- +- PR_SetNetAddr(PR_IpAddrAny, PR_AF_INET, extPort, extAddr); +- +- ip = (char*)(&extAddr->inet.ip); +- *ip++ = response[4]; +- *ip++ = response[5]; +- *ip++ = response[6]; +- *ip++ = response[7]; +- +- break; +- case 0x04: // IPv6 +- +- extPort = (response[20] << 8) | response[21]; +- +- PR_SetNetAddr(PR_IpAddrAny, PR_AF_INET6, extPort, extAddr); +- +- ip = (char*)(&extAddr->ipv6.ip.pr_s6_addr); +- *ip++ = response[4]; *ip++ = response[5]; +- *ip++ = response[6]; *ip++ = response[7]; +- *ip++ = response[8]; *ip++ = response[9]; +- *ip++ = response[10]; *ip++ = response[11]; +- *ip++ = response[12]; *ip++ = response[13]; +- *ip++ = response[14]; *ip++ = response[15]; +- *ip++ = response[16]; *ip++ = response[17]; +- *ip++ = response[18]; *ip++ = response[19]; +- +- break; +- case 0x03: // FQDN +- // if we get here, we don't know our external address. +- // however, as that's possibly not critical to the user, +- // we let it slide. +- extPort = (response[response_len - 2] << 8) | +- response[response_len - 1]; +- PR_InitializeNetAddr(PR_IpAddrNull, extPort, extAddr); +- break; +- } +- return NS_OK; +-} +- +-// Negotiate a SOCKS 4 connection. Assumes the TCP connection to the socks +-// server port has been established. +-static nsresult +-ConnectSOCKS4(PRFileDesc *fd, const PRNetAddr *addr, PRIntervalTime timeout) +-{ +- int request_len = 0; +- int write_len; +- int response_len = 0; +- int desired_len = 0; +- char *ip = nsnull; +- unsigned char request[12]; +- unsigned char response[10]; +- +- NS_ENSURE_TRUE(fd, NS_ERROR_NOT_INITIALIZED); +- NS_ENSURE_TRUE(addr, NS_ERROR_NOT_INITIALIZED); +- +- request[0] = 0x04; // SOCKS version 4 +- request[1] = 0x01; // CD command code -- 1 for connect +- +- // destination port +- PRInt32 destPort = PR_ntohs(PR_NetAddrInetPort(addr)); +- +- // store the port +- request[2] = (unsigned char)(destPort >> 8); +- request[3] = (unsigned char)destPort; +- +- // username +- request[8] = 'M'; +- request[9] = 'O'; +- request[10] = 'Z'; +- +- request[11] = 0x00; +- +- request_len = 12; +- +- nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret; +- +- if (info->Flags() & nsISocketProvider::PROXY_RESOLVES_HOST) { +- +- LOGDEBUG(("using server to resolve hostnames rather than resolving it first\n")); +- +- // if the PROXY_RESOLVES_HOST flag is set, we assume that the +- // transport wants us to pass the SOCKS server the hostname +- // and port and let it do the name resolution. +- +- // an extension to SOCKS 4, called 4a, specifies a way +- // to do this, so we'll try that and hope the +- // server supports it. +- +- // the real destination hostname and port was stored +- // in our info object earlier when this layer was created. +- +- const nsCString& destHost = info->DestinationHost(); +- +- LOGDEBUG(("host:port -> %s:%li\n", destHost.get(), destPort)); +- +- // the IP portion of the query is set to this special address. +- request[4] = 0; +- request[5] = 0; +- request[6] = 0; +- request[7] = 1; +- +- write_len = pr_Send(fd, request, request_len, 0, &timeout); +- if (write_len != request_len) { +- return NS_ERROR_FAILURE; +- } +- +- // Remember the NULL. +- int host_len = destHost.Length() + 1; +- +- write_len = pr_Send(fd, destHost.get(), host_len, 0, &timeout); +- if (write_len != host_len) { +- return NS_ERROR_FAILURE; +- } +- +- // No data to send, just sent it. +- request_len = 0; +- +- } else if (PR_NetAddrFamily(addr) == PR_AF_INET) { // IPv4 +- +- // store the ip +- ip = (char*)(&addr->inet.ip); +- request[4] = *ip++; +- request[5] = *ip++; +- request[6] = *ip++; +- request[7] = *ip++; +- +- } else if (PR_NetAddrFamily(addr) == PR_AF_INET6) { // IPv6 +- +- // IPv4 address encoded in an IPv6 address +- if (PR_IsNetAddrType(addr, PR_IpAddrV4Mapped)) { +- // store the ip +- ip = (char*)(&addr->ipv6.ip.pr_s6_addr[12]); +- request[4] = *ip++; +- request[5] = *ip++; +- request[6] = *ip++; +- request[7] = *ip++; +- } else { +- LOGERROR(("IPv6 is not supported in SOCKS 4.")); +- return NS_ERROR_FAILURE; // SOCKS 4 can't do IPv6 +- } +- +- } else { +- LOGERROR(("Don't know what kind of IP address this is.")); +- return NS_ERROR_FAILURE; // don't recognize this type +- } +- +- if (request_len > 0) { +- write_len = pr_Send(fd, request, request_len, 0, &timeout); +- if (write_len != request_len) { +- return NS_ERROR_FAILURE; ++ rv = dns->Resolve(mProxyHost, 0, getter_AddRefs(mDnsRec)); ++ if (NS_FAILED(rv)) { ++ LOGERROR(("socks: DNS lookup for SOCKS proxy %s failed", ++ mProxyHost.get())); ++ return PR_FAILURE; + } + } + +- // get the server's response +- desired_len = 8; // size of the response +- response_len = pr_RecvAll(fd, response, desired_len, 0, &timeout); +- if (response_len < desired_len) { +- LOGERROR(("pr_RecvAll() failed. response_len = %d.", response_len)); +- return NS_ERROR_FAILURE; ++ do { ++ rv = mDnsRec->GetNextAddr(mProxyPort, &mInternalProxyAddr); ++ // No more addresses to try? If so, we'll need to bail ++ if (NS_FAILED(rv)) { ++ LOGERROR(("socks: unable to connect to SOCKS proxy, %s", ++ mProxyHost.get())); ++ return PR_FAILURE; ++ } ++ ++#if defined(PR_LOGGING) ++ char buf[64]; ++ PR_NetAddrToString(&mInternalProxyAddr, buf, sizeof(buf)); ++ LOGDEBUG(("socks: trying proxy server, %s:%hu", ++ buf, PR_ntohs(PR_NetAddrInetPort(&mInternalProxyAddr)))); ++#endif ++ status = fd->lower->methods->connect(fd->lower, ++ &mInternalProxyAddr, mTimeout); ++ if (status != PR_SUCCESS) { ++ PRErrorCode c = PR_GetError(); ++ // If EINPROGRESS, return now and check back later after polling ++ if (c == PR_WOULD_BLOCK_ERROR || c == PR_IN_PROGRESS_ERROR) { ++ mState = SOCKS_CONNECTING_TO_PROXY; ++ return status; ++ } ++ } ++ } while (status != PR_SUCCESS); ++ ++ // Connected now, start SOCKS ++ if (mVersion == 4) ++ return WriteV4ConnectRequest(); ++ return WriteV5AuthRequest(); ++} ++ ++PRStatus ++nsSOCKSSocketInfo::ContinueConnectingToProxy(PRFileDesc *fd, PRInt16 oflags) ++{ ++ PRStatus status; ++ ++ NS_ABORT_IF_FALSE(mState == SOCKS_CONNECTING_TO_PROXY, ++ "Continuing connection in wrong state!"); ++ ++ LOGDEBUG(("socks: continuing connection to proxy")); ++ ++ status = fd->lower->methods->connectcontinue(fd->lower, oflags); ++ if (status != PR_SUCCESS) { ++ PRErrorCode c = PR_GetError(); ++ if (c != PR_WOULD_BLOCK_ERROR && c != PR_IN_PROGRESS_ERROR) { ++ // A connection failure occured, try another address ++ mState = SOCKS_INITIAL; ++ return ConnectToProxy(fd); ++ } ++ ++ // We're still connecting ++ return PR_FAILURE; + } + +- if ((response[0] != 0x00) && (response[0] != 0x04)) { +- // Novell BorderManager sends a response of type 4, should be zero +- // According to the spec. Cope with this brokenness. +- // it's not a SOCKS 4 reply or version 0 of the reply code +- LOGERROR(("Not a SOCKS 4 reply. Expected: 0; received: %x.", response[0])); +- return NS_ERROR_FAILURE; ++ // Connected now, start SOCKS ++ if (mVersion == 4) ++ return WriteV4ConnectRequest(); ++ return WriteV5AuthRequest(); ++} ++ ++PRStatus ++nsSOCKSSocketInfo::WriteV4ConnectRequest() ++{ ++ PRNetAddr *addr = &mDestinationAddr; ++ PRInt32 proxy_resolve; ++ ++ NS_ABORT_IF_FALSE(mState == SOCKS_CONNECTING_TO_PROXY, ++ "Invalid state!"); ++ ++ proxy_resolve = mFlags & nsISocketProvider::PROXY_RESOLVES_HOST; ++ ++ mDataLength = 0; ++ mState = SOCKS4_WRITE_CONNECT_REQUEST; ++ ++ LOGDEBUG(("socks4: sending connection request (socks4a resolve? %s)", ++ proxy_resolve? "yes" : "no")); ++ ++ // Send a SOCKS 4 connect request. ++ WriteUint8(0x04); // version -- 4 ++ WriteUint8(0x01); // command -- connect ++ WriteNetPort(addr); ++ if (proxy_resolve) { ++ // Add the full name, null-terminated, to the request ++ // according to SOCKS 4a. A fake IP address, with the first ++ // four bytes set to 0 and the last byte set to something other ++ // than 0, is used to notify the proxy that this is a SOCKS 4a ++ // request. This request type works for Tor and perhaps others. ++ WriteUint32(PR_htonl(0x00000001)); // Fake IP ++ WriteUint8(0x00); // Send an emtpy username ++ if (mDestinationHost.Length() > MAX_HOSTNAME_LEN) { ++ LOGERROR(("socks4: destination host name is too long!")); ++ HandshakeFinished(PR_BAD_ADDRESS_ERROR); ++ return PR_FAILURE; ++ } ++ WriteString(mDestinationHost); // Hostname ++ WriteUint8(0x00); ++ } else if (PR_NetAddrFamily(addr) == PR_AF_INET) { ++ WriteNetAddr(addr); // Add the IPv4 address ++ WriteUint8(0x00); // Send an emtpy username ++ } else if (PR_NetAddrFamily(addr) == PR_AF_INET6) { ++ LOGERROR(("socks: SOCKS 4 can't handle IPv6 addresses!")); ++ HandshakeFinished(PR_BAD_ADDRESS_ERROR); ++ return PR_FAILURE; + } + +- if (response[1] != 0x5A) { // = 90: request granted +- // connect request not granted +- LOGERROR(("Connection request refused. Expected: 90; received: %d.", response[1])); +- return NS_ERROR_FAILURE; +- } +- +- return NS_OK; +- ++ return PR_SUCCESS; + } + ++PRStatus ++nsSOCKSSocketInfo::ReadV4ConnectResponse() ++{ ++ NS_ABORT_IF_FALSE(mState == SOCKS4_READ_CONNECT_RESPONSE, ++ "Handling SOCKS 4 connection reply in wrong state!"); ++ NS_ABORT_IF_FALSE(mDataLength == 8, ++ "SOCKS 4 connection reply must be 8 bytes!"); ++ ++ LOGDEBUG(("socks4: checking connection reply")); ++ ++ if (ReadUint8() != 0x00) { ++ LOGERROR(("socks4: wrong connection reply")); ++ HandshakeFinished(PR_CONNECT_REFUSED_ERROR); ++ return PR_FAILURE; ++ } ++ ++ // See if our connection request was granted ++ if (ReadUint8() == 90) { ++ LOGDEBUG(("socks4: connection successful!")); ++ HandshakeFinished(); ++ return PR_SUCCESS; ++ } ++ ++ LOGERROR(("socks4: unable to connect")); ++ HandshakeFinished(PR_CONNECT_REFUSED_ERROR); ++ return PR_FAILURE; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::WriteV5AuthRequest() ++{ ++ NS_ABORT_IF_FALSE(mVersion == 5, "SOCKS version must be 5!"); ++ ++ mState = SOCKS5_WRITE_AUTH_REQUEST; ++ ++ // Send an initial SOCKS 5 greeting ++ LOGDEBUG(("socks5: sending auth methods")); ++ WriteUint8(0x05); // version -- 5 ++ WriteUint8(0x01); // # auth methods -- 1 ++ WriteUint8(0x00); // we don't support authentication ++ ++ return PR_SUCCESS; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::ReadV5AuthResponse() ++{ ++ NS_ABORT_IF_FALSE(mState == SOCKS5_READ_AUTH_RESPONSE, ++ "Handling SOCKS 5 auth method reply in wrong state!"); ++ NS_ABORT_IF_FALSE(mDataLength == 2, ++ "SOCKS 5 auth method reply must be 2 bytes!"); ++ ++ LOGDEBUG(("socks5: checking auth method reply")); ++ ++ // Check version number ++ if (ReadUint8() != 0x05) { ++ LOGERROR(("socks5: unexpected version in the reply")); ++ HandshakeFinished(PR_CONNECT_REFUSED_ERROR); ++ return PR_FAILURE; ++ } ++ ++ // Make sure our authentication choice was accepted ++ if (ReadUint8() != 0x00) { ++ LOGERROR(("socks5: server did not accept our authentication method")); ++ HandshakeFinished(PR_CONNECT_REFUSED_ERROR); ++ return PR_FAILURE; ++ } ++ ++ return WriteV5ConnectRequest(); ++} ++ ++PRStatus ++nsSOCKSSocketInfo::WriteV5ConnectRequest() ++{ ++ // Send SOCKS 5 connect request ++ PRNetAddr *addr = &mDestinationAddr; ++ PRInt32 proxy_resolve; ++ proxy_resolve = mFlags & nsISocketProvider::PROXY_RESOLVES_HOST; ++ ++ LOGDEBUG(("socks5: sending connection request (socks5 resolve? %s)", ++ proxy_resolve? "yes" : "no")); ++ ++ mDataLength = 0; ++ mState = SOCKS5_WRITE_CONNECT_REQUEST; ++ ++ WriteUint8(0x05); // version -- 5 ++ WriteUint8(0x01); // command -- connect ++ WriteUint8(0x00); // reserved ++ ++ // Add the address to the SOCKS 5 request. SOCKS 5 supports several ++ // address types, so we pick the one that works best for us. ++ if (proxy_resolve) { ++ // Add the host name. Only a single byte is used to store the length, ++ // so we must prevent long names from being used. ++ if (mDestinationHost.Length() > MAX_HOSTNAME_LEN) { ++ LOGERROR(("socks5: destination host name is too long!")); ++ HandshakeFinished(PR_BAD_ADDRESS_ERROR); ++ return PR_FAILURE; ++ } ++ WriteUint8(0x03); // addr type -- domainname ++ WriteUint8(mDestinationHost.Length()); // name length ++ WriteString(mDestinationHost); ++ } else if (PR_NetAddrFamily(addr) == PR_AF_INET) { ++ WriteUint8(0x01); // addr type -- IPv4 ++ WriteNetAddr(addr); ++ } else if (PR_NetAddrFamily(addr) == PR_AF_INET6) { ++ WriteUint8(0x04); // addr type -- IPv6 ++ WriteNetAddr(addr); ++ } else { ++ LOGERROR(("socks5: destination address of unknown type!")); ++ HandshakeFinished(PR_BAD_ADDRESS_ERROR); ++ return PR_FAILURE; ++ } ++ ++ WriteNetPort(addr); // port ++ ++ return PR_SUCCESS; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::ReadV5AddrTypeAndLength(PRUint8 *type, PRUint32 *len) ++{ ++ NS_ABORT_IF_FALSE(mState == SOCKS5_READ_CONNECT_RESPONSE_TOP || ++ mState == SOCKS5_READ_CONNECT_RESPONSE_BOTTOM, ++ "Invalid state!"); ++ NS_ABORT_IF_FALSE(mDataLength >= 5, ++ "SOCKS 5 connection reply must be at least 5 bytes!"); ++ ++ // Seek to the address location ++ mReadOffset = 3; ++ ++ *type = ReadUint8(); ++ ++ switch (*type) { ++ case 0x01: // ipv4 ++ *len = 4 - 1; ++ break; ++ case 0x04: // ipv6 ++ *len = 16 - 1; ++ break; ++ case 0x03: // fqdn ++ *len = ReadUint8(); ++ break; ++ default: // wrong address type ++ LOGERROR(("socks5: wrong address type in connection reply!")); ++ return PR_FAILURE; ++ } ++ ++ return PR_SUCCESS; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::ReadV5ConnectResponseTop() ++{ ++ PRUint8 res; ++ PRUint32 len; ++ ++ NS_ABORT_IF_FALSE(mState == SOCKS5_READ_CONNECT_RESPONSE_TOP, ++ "Invalid state!"); ++ NS_ABORT_IF_FALSE(mDataLength == 5, ++ "SOCKS 5 connection reply must be exactly 5 bytes!"); ++ ++ LOGDEBUG(("socks5: checking connection reply")); ++ ++ // Check version number ++ if (ReadUint8() != 0x05) { ++ LOGERROR(("socks5: unexpected version in the reply")); ++ HandshakeFinished(PR_CONNECT_REFUSED_ERROR); ++ return PR_FAILURE; ++ } ++ ++ // Check response ++ res = ReadUint8(); ++ if (res != 0x00) { ++ PRErrorCode c = PR_CONNECT_REFUSED_ERROR; ++ ++ switch (res) { ++ case 0x01: ++ LOGERROR(("socks5: connect failed: " ++ "01, General SOCKS server failure.")); ++ break; ++ case 0x02: ++ LOGERROR(("socks5: connect failed: " ++ "02, Connection not allowed by ruleset.")); ++ break; ++ case 0x03: ++ LOGERROR(("socks5: connect failed: 03, Network unreachable.")); ++ c = PR_NETWORK_UNREACHABLE_ERROR; ++ break; ++ case 0x04: ++ LOGERROR(("socks5: connect failed: 04, Host unreachable.")); ++ break; ++ case 0x05: ++ LOGERROR(("socks5: connect failed: 05, Connection refused.")); ++ break; ++ case 0x06: ++ LOGERROR(("socks5: connect failed: 06, TTL expired.")); ++ c = PR_CONNECT_TIMEOUT_ERROR; ++ break; ++ case 0x07: ++ LOGERROR(("socks5: connect failed: " ++ "07, Command not supported.")); ++ break; ++ case 0x08: ++ LOGERROR(("socks5: connect failed: " ++ "08, Address type not supported.")); ++ c = PR_BAD_ADDRESS_ERROR; ++ break; ++ default: ++ LOGERROR(("socks5: connect failed.")); ++ break; ++ } ++ ++ HandshakeFinished(c); ++ return PR_FAILURE; ++ } ++ ++ if (ReadV5AddrTypeAndLength(&res, &len) != PR_SUCCESS) { ++ HandshakeFinished(PR_BAD_ADDRESS_ERROR); ++ return PR_FAILURE; ++ } ++ ++ mState = SOCKS5_READ_CONNECT_RESPONSE_BOTTOM; ++ WantRead(len + 2); ++ ++ return PR_SUCCESS; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::ReadV5ConnectResponseBottom() ++{ ++ PRUint8 type; ++ PRUint32 len; ++ ++ NS_ABORT_IF_FALSE(mState == SOCKS5_READ_CONNECT_RESPONSE_BOTTOM, ++ "Invalid state!"); ++ ++ if (ReadV5AddrTypeAndLength(&type, &len) != PR_SUCCESS) { ++ HandshakeFinished(PR_BAD_ADDRESS_ERROR); ++ return PR_FAILURE; ++ } ++ ++ NS_ABORT_IF_FALSE(mDataLength == 7+len, ++ "SOCKS 5 unexpected length of connection reply!"); ++ ++ LOGDEBUG(("socks5: loading source addr and port")); ++ // Read what the proxy says is our source address ++ switch (type) { ++ case 0x01: // ipv4 ++ ReadNetAddr(&mExternalProxyAddr, PR_AF_INET); ++ break; ++ case 0x04: // ipv6 ++ ReadNetAddr(&mExternalProxyAddr, PR_AF_INET6); ++ break; ++ case 0x03: // fqdn (skip) ++ mReadOffset += len; ++ mExternalProxyAddr.raw.family = PR_AF_INET; ++ break; ++ } ++ ++ ReadNetPort(&mExternalProxyAddr); ++ ++ LOGDEBUG(("socks5: connected!")); ++ HandshakeFinished(); ++ ++ return PR_SUCCESS; ++} ++ ++void ++nsSOCKSSocketInfo::SetConnectTimeout(PRIntervalTime to) ++{ ++ mTimeout = to; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::DoHandshake(PRFileDesc *fd, PRInt16 oflags) ++{ ++ LOGDEBUG(("socks: DoHandshake(), state = %d", mState)); ++ ++ switch (mState) { ++ case SOCKS_INITIAL: ++ return ConnectToProxy(fd); ++ case SOCKS_CONNECTING_TO_PROXY: ++ return ContinueConnectingToProxy(fd, oflags); ++ case SOCKS4_WRITE_CONNECT_REQUEST: ++ if (WriteToSocket(fd) != PR_SUCCESS) ++ return PR_FAILURE; ++ WantRead(8); ++ mState = SOCKS4_READ_CONNECT_RESPONSE; ++ return PR_SUCCESS; ++ case SOCKS4_READ_CONNECT_RESPONSE: ++ if (ReadFromSocket(fd) != PR_SUCCESS) ++ return PR_FAILURE; ++ return ReadV4ConnectResponse(); ++ ++ case SOCKS5_WRITE_AUTH_REQUEST: ++ if (WriteToSocket(fd) != PR_SUCCESS) ++ return PR_FAILURE; ++ WantRead(2); ++ mState = SOCKS5_READ_AUTH_RESPONSE; ++ return PR_SUCCESS; ++ case SOCKS5_READ_AUTH_RESPONSE: ++ if (ReadFromSocket(fd) != PR_SUCCESS) ++ return PR_FAILURE; ++ return ReadV5AuthResponse(); ++ case SOCKS5_WRITE_CONNECT_REQUEST: ++ if (WriteToSocket(fd) != PR_SUCCESS) ++ return PR_FAILURE; ++ ++ // The SOCKS 5 response to the connection request is variable ++ // length. First, we'll read enough to tell how long the response ++ // is, and will read the rest later. ++ WantRead(5); ++ mState = SOCKS5_READ_CONNECT_RESPONSE_TOP; ++ return PR_SUCCESS; ++ case SOCKS5_READ_CONNECT_RESPONSE_TOP: ++ if (ReadFromSocket(fd) != PR_SUCCESS) ++ return PR_FAILURE; ++ return ReadV5ConnectResponseTop(); ++ case SOCKS5_READ_CONNECT_RESPONSE_BOTTOM: ++ if (ReadFromSocket(fd) != PR_SUCCESS) ++ return PR_FAILURE; ++ return ReadV5ConnectResponseBottom(); ++ ++ case SOCKS_CONNECTED: ++ LOGERROR(("socks: already connected")); ++ HandshakeFinished(PR_IS_CONNECTED_ERROR); ++ return PR_FAILURE; ++ case SOCKS_FAILED: ++ LOGERROR(("socks: already failed")); ++ return PR_FAILURE; ++ } ++ ++ LOGERROR(("socks: executing handshake in invalid state, %d", mState)); ++ HandshakeFinished(PR_INVALID_STATE_ERROR); ++ ++ return PR_FAILURE; ++} ++ ++PRInt16 ++nsSOCKSSocketInfo::GetPollFlags() const ++{ ++ switch (mState) { ++ case SOCKS_CONNECTING_TO_PROXY: ++ return PR_POLL_EXCEPT | PR_POLL_WRITE; ++ case SOCKS4_WRITE_CONNECT_REQUEST: ++ case SOCKS5_WRITE_AUTH_REQUEST: ++ case SOCKS5_WRITE_CONNECT_REQUEST: ++ return PR_POLL_WRITE; ++ case SOCKS4_READ_CONNECT_RESPONSE: ++ case SOCKS5_READ_AUTH_RESPONSE: ++ case SOCKS5_READ_CONNECT_RESPONSE_TOP: ++ case SOCKS5_READ_CONNECT_RESPONSE_BOTTOM: ++ return PR_POLL_READ; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++inline void ++nsSOCKSSocketInfo::WriteUint8(PRUint8 v) ++{ ++ NS_ABORT_IF_FALSE(mDataLength + sizeof(v) <= BUFFER_SIZE, ++ "Can't write that much data!"); ++ mData[mDataLength] = v; ++ mDataLength += sizeof(v); ++} ++ ++inline void ++nsSOCKSSocketInfo::WriteUint16(PRUint16 v) ++{ ++ NS_ABORT_IF_FALSE(mDataLength + sizeof(v) <= BUFFER_SIZE, ++ "Can't write that much data!"); ++ memcpy(mData + mDataLength, &v, sizeof(v)); ++ mDataLength += sizeof(v); ++} ++ ++inline void ++nsSOCKSSocketInfo::WriteUint32(PRUint32 v) ++{ ++ NS_ABORT_IF_FALSE(mDataLength + sizeof(v) <= BUFFER_SIZE, ++ "Can't write that much data!"); ++ memcpy(mData + mDataLength, &v, sizeof(v)); ++ mDataLength += sizeof(v); ++} ++ ++void ++nsSOCKSSocketInfo::WriteNetAddr(const PRNetAddr *addr) ++{ ++ const char *ip = NULL; ++ PRUint32 len = 0; ++ ++ if (PR_NetAddrFamily(addr) == PR_AF_INET) { ++ ip = (const char*)&addr->inet.ip; ++ len = sizeof(addr->inet.ip); ++ } else if (PR_NetAddrFamily(addr) == PR_AF_INET6) { ++ ip = (const char*)addr->ipv6.ip.pr_s6_addr; ++ len = sizeof(addr->ipv6.ip.pr_s6_addr); ++ } ++ ++ NS_ABORT_IF_FALSE(ip != NULL, "Unknown address"); ++ NS_ABORT_IF_FALSE(mDataLength + len <= BUFFER_SIZE, ++ "Can't write that much data!"); ++ ++ memcpy(mData + mDataLength, ip, len); ++ mDataLength += len; ++} ++ ++void ++nsSOCKSSocketInfo::WriteNetPort(const PRNetAddr *addr) ++{ ++ WriteUint16(PR_NetAddrInetPort(addr)); ++} ++ ++void ++nsSOCKSSocketInfo::WriteString(const nsACString &str) ++{ ++ NS_ABORT_IF_FALSE(mDataLength + str.Length() <= BUFFER_SIZE, ++ "Can't write that much data!"); ++ memcpy(mData + mDataLength, str.Data(), str.Length()); ++ mDataLength += str.Length(); ++} ++ ++inline PRUint8 ++nsSOCKSSocketInfo::ReadUint8() ++{ ++ PRUint8 rv; ++ NS_ABORT_IF_FALSE(mReadOffset + sizeof(rv) <= mDataLength, ++ "Not enough space to pop a uint8!"); ++ rv = mData[mReadOffset]; ++ mReadOffset += sizeof(rv); ++ return rv; ++} ++ ++inline PRUint16 ++nsSOCKSSocketInfo::ReadUint16() ++{ ++ PRUint16 rv; ++ NS_ABORT_IF_FALSE(mReadOffset + sizeof(rv) <= mDataLength, ++ "Not enough space to pop a uint16!"); ++ memcpy(&rv, mData + mReadOffset, sizeof(rv)); ++ mReadOffset += sizeof(rv); ++ return rv; ++} ++ ++inline PRUint32 ++nsSOCKSSocketInfo::ReadUint32() ++{ ++ PRUint32 rv; ++ NS_ABORT_IF_FALSE(mReadOffset + sizeof(rv) <= mDataLength, ++ "Not enough space to pop a uint32!"); ++ memcpy(&rv, mData + mReadOffset, sizeof(rv)); ++ mReadOffset += sizeof(rv); ++ return rv; ++} ++ ++void ++nsSOCKSSocketInfo::ReadNetAddr(PRNetAddr *addr, PRUint16 fam) ++{ ++ PRUint32 amt; ++ const PRUint8 *ip = mData + mReadOffset; ++ ++ addr->raw.family = fam; ++ if (fam == PR_AF_INET) { ++ amt = sizeof(addr->inet.ip); ++ NS_ABORT_IF_FALSE(mReadOffset + amt <= mDataLength, ++ "Not enough space to pop an ipv4 addr!"); ++ memcpy(&addr->inet.ip, ip, amt); ++ } else if (fam == PR_AF_INET6) { ++ amt = sizeof(addr->ipv6.ip.pr_s6_addr); ++ NS_ABORT_IF_FALSE(mReadOffset + amt <= mDataLength, ++ "Not enough space to pop an ipv6 addr!"); ++ memcpy(addr->ipv6.ip.pr_s6_addr, ip, amt); ++ } ++ ++ mReadOffset += amt; ++} ++ ++void ++nsSOCKSSocketInfo::ReadNetPort(PRNetAddr *addr) ++{ ++ addr->inet.port = ReadUint16(); ++} ++ ++void ++nsSOCKSSocketInfo::WantRead(PRUint32 sz) ++{ ++ NS_ABORT_IF_FALSE(mDataIoPtr == NULL, ++ "WantRead() called while I/O already in progress!"); ++ NS_ABORT_IF_FALSE(mDataLength + sz <= BUFFER_SIZE, ++ "Can't read that much data!"); ++ mAmountToRead = sz; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::ReadFromSocket(PRFileDesc *fd) ++{ ++ PRInt32 rc; ++ const PRUint8 *end; ++ ++ if (!mAmountToRead) { ++ LOGDEBUG(("socks: ReadFromSocket(), nothing to do")); ++ return PR_SUCCESS; ++ } ++ ++ if (!mDataIoPtr) { ++ mDataIoPtr = mData + mDataLength; ++ mDataLength += mAmountToRead; ++ } ++ ++ end = mData + mDataLength; ++ ++ while (mDataIoPtr < end) { ++ rc = PR_Read(fd, mDataIoPtr, end - mDataIoPtr); ++ if (rc <= 0) { ++ if (rc == 0) { ++ LOGERROR(("socks: proxy server closed connection")); ++ HandshakeFinished(PR_CONNECT_REFUSED_ERROR); ++ return PR_FAILURE; ++ } else if (PR_GetError() == PR_WOULD_BLOCK_ERROR) { ++ LOGDEBUG(("socks: ReadFromSocket(), want read")); ++ } ++ break; ++ } ++ ++ mDataIoPtr += rc; ++ } ++ ++ LOGDEBUG(("socks: ReadFromSocket(), have %u bytes total", ++ unsigned(mDataIoPtr - mData))); ++ if (mDataIoPtr == end) { ++ mDataIoPtr = nsnull; ++ mAmountToRead = 0; ++ mReadOffset = 0; ++ return PR_SUCCESS; ++ } ++ ++ return PR_FAILURE; ++} ++ ++PRStatus ++nsSOCKSSocketInfo::WriteToSocket(PRFileDesc *fd) ++{ ++ PRInt32 rc; ++ const PRUint8 *end; ++ ++ if (!mDataLength) { ++ LOGDEBUG(("socks: WriteToSocket(), nothing to do")); ++ return PR_SUCCESS; ++ } ++ ++ if (!mDataIoPtr) ++ mDataIoPtr = mData; ++ ++ end = mData + mDataLength; ++ ++ while (mDataIoPtr < end) { ++ rc = PR_Write(fd, mDataIoPtr, end - mDataIoPtr); ++ if (rc < 0) { ++ if (PR_GetError() == PR_WOULD_BLOCK_ERROR) { ++ LOGDEBUG(("socks: WriteToSocket(), want write")); ++ } ++ break; ++ } ++ ++ mDataIoPtr += rc; ++ } ++ ++ if (mDataIoPtr == end) { ++ mDataIoPtr = nsnull; ++ mDataLength = 0; ++ mReadOffset = 0; ++ return PR_SUCCESS; ++ } ++ ++ return PR_FAILURE; ++} + + static PRStatus +-nsSOCKSIOLayerConnect(PRFileDesc *fd, const PRNetAddr *addr, PRIntervalTime /*timeout*/) ++nsSOCKSIOLayerConnect(PRFileDesc *fd, const PRNetAddr *addr, PRIntervalTime to) + { ++ PRStatus status; ++ PRNetAddr dst; + ++ nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret; ++ if (info == NULL) return PR_FAILURE; ++ ++ if (PR_NetAddrFamily(addr) == PR_AF_INET6 && ++ PR_IsNetAddrType(addr, PR_IpAddrV4Mapped)) { ++ const PRUint8 *srcp; ++ ++ LOGDEBUG(("socks: converting ipv4-mapped ipv6 address to ipv4")); ++ ++ // copied from _PR_ConvertToIpv4NetAddr() ++ PR_InitializeNetAddr(PR_IpAddrAny, 0, &dst); ++ srcp = addr->ipv6.ip.pr_s6_addr; ++ memcpy(&dst.inet.ip, srcp + 12, 4); ++ dst.inet.family = PR_AF_INET; ++ dst.inet.port = addr->ipv6.port; ++ } else { ++ memcpy(&dst, addr, sizeof(dst)); ++ } ++ ++ info->SetDestinationAddr(&dst); ++ info->SetConnectTimeout(to); ++ ++ do { ++ status = info->DoHandshake(fd, -1); ++ } while (status == PR_SUCCESS && !info->IsConnected()); ++ ++ return status; ++} ++ ++static PRStatus ++nsSOCKSIOLayerConnectContinue(PRFileDesc *fd, PRInt16 oflags) ++{ + PRStatus status; + + nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret; + if (info == NULL) return PR_FAILURE; + +- // First, we need to look up our proxy... +- const nsCString &proxyHost = info->ProxyHost(); ++ do { ++ status = info->DoHandshake(fd, oflags); ++ } while (status == PR_SUCCESS && !info->IsConnected()); + +- if (proxyHost.IsEmpty()) +- return PR_FAILURE; ++ return status; ++} + +- PRInt32 socksVersion = info->Version(); ++static PRInt16 ++nsSOCKSIOLayerPoll(PRFileDesc *fd, PRInt16 in_flags, PRInt16 *out_flags) ++{ ++ nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret; ++ if (info == NULL) return PR_FAILURE; + +- LOGDEBUG(("nsSOCKSIOLayerConnect SOCKS %u; proxyHost: %s.", socksVersion, proxyHost.get())); +- +- // Sync resolve the proxy hostname. +- PRNetAddr proxyAddr; +- nsCOMPtr<nsIDNSRecord> rec; +- nsresult rv; +- { +- nsCOMPtr<nsIDNSService> dns = do_GetService(NS_DNSSERVICE_CONTRACTID); +- if (!dns) +- return PR_FAILURE; +- +- rv = dns->Resolve(proxyHost, 0, getter_AddRefs(rec)); +- if (NS_FAILED(rv)) +- return PR_FAILURE; ++ if (!info->IsConnected()) { ++ *out_flags = 0; ++ return info->GetPollFlags(); + } + +- info->SetInternalProxyAddr(&proxyAddr); +- +- // For now, we'll do this as a blocking connect, +- // but with nspr 4.1, the necessary functions to +- // do a non-blocking connect will be available +- +- // Preserve the non-blocking state of the socket +- PRBool nonblocking; +- PRSocketOptionData sockopt; +- sockopt.option = PR_SockOpt_Nonblocking; +- status = PR_GetSocketOption(fd, &sockopt); +- +- if (PR_SUCCESS != status) { +- LOGERROR(("PR_GetSocketOption() failed. status = %x.", status)); +- return status; +- } +- +- // Store blocking option +- nonblocking = sockopt.value.non_blocking; +- +- sockopt.option = PR_SockOpt_Nonblocking; +- sockopt.value.non_blocking = PR_FALSE; +- status = PR_SetSocketOption(fd, &sockopt); +- +- if (PR_SUCCESS != status) { +- LOGERROR(("PR_SetSocketOption() failed. status = %x.", status)); +- return status; +- } +- +- // Now setup sockopts, so we can restore the value later. +- sockopt.option = PR_SockOpt_Nonblocking; +- sockopt.value.non_blocking = nonblocking; +- +- // This connectWait should be long enough to connect to local proxy +- // servers, but not much longer. Since this protocol negotiation +- // uses blocking network calls, the app can appear to hang for a maximum +- // of this time if the user presses the STOP button during the SOCKS +- // connection negotiation. Note that this value only applies to the +- // connecting to the SOCKS server: once the SOCKS connection has been +- // established, the value is not used anywhere else. +- PRIntervalTime connectWait = PR_SecondsToInterval(10); +- +- // Connect to the proxy server. +- PRInt32 addresses = 0; +- do { +- rv = rec->GetNextAddr(info->ProxyPort(), &proxyAddr); +- if (NS_FAILED(rv)) { +- status = PR_FAILURE; +- break; +- } +- ++addresses; +- status = fd->lower->methods->connect(fd->lower, &proxyAddr, connectWait); +- } while (PR_SUCCESS != status); +- +- if (PR_SUCCESS != status) { +- LOGERROR(("Failed to TCP connect to the proxy server (%s): timeout = %d, status = %x, tried %d addresses.", proxyHost.get(), connectWait, status, addresses)); +- PR_SetSocketOption(fd, &sockopt); +- return status; +- } +- +- +- // We are now connected to the SOCKS proxy server. +- // Now we will negotiate a connection to the desired server. +- +- // External IP address returned from ConnectSOCKS5(). Not supported in SOCKS4. +- PRNetAddr extAddr; +- PR_InitializeNetAddr(PR_IpAddrNull, 0, &extAddr); +- +- NS_ASSERTION((socksVersion == 4) || (socksVersion == 5), "SOCKS Version must be selected"); +- +- // Try to connect via SOCKS 5. +- if (socksVersion == 5) { +- rv = ConnectSOCKS5(fd, addr, &extAddr, connectWait); +- +- if (NS_FAILED(rv)) { +- PR_SetSocketOption(fd, &sockopt); +- return PR_FAILURE; +- } +- +- } +- +- // Try to connect via SOCKS 4. +- else { +- rv = ConnectSOCKS4(fd, addr, connectWait); +- +- if (NS_FAILED(rv)) { +- PR_SetSocketOption(fd, &sockopt); +- return PR_FAILURE; +- } +- +- } +- +- +- info->SetDestinationAddr((PRNetAddr*)addr); +- info->SetExternalProxyAddr(&extAddr); +- +- // restore non-blocking option +- PR_SetSocketOption(fd, &sockopt); +- +- // we're set-up and connected. +- // this socket can be used as normal now. +- +- return PR_SUCCESS; ++ return fd->lower->methods->poll(fd->lower, in_flags, out_flags); + } + + static PRStatus + nsSOCKSIOLayerClose(PRFileDesc *fd) + { + nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret; + PRDescIdentity id = PR_GetLayersIdentity(fd); + +@@ -880,16 +1115,18 @@ nsSOCKSIOLayerAddToSocket(PRInt32 family + + + if (firstTime) + { + nsSOCKSIOLayerIdentity = PR_GetUniqueIdentity("SOCKS layer"); + nsSOCKSIOLayerMethods = *PR_GetDefaultIOMethods(); + + nsSOCKSIOLayerMethods.connect = nsSOCKSIOLayerConnect; ++ nsSOCKSIOLayerMethods.connectcontinue = nsSOCKSIOLayerConnectContinue; ++ nsSOCKSIOLayerMethods.poll = nsSOCKSIOLayerPoll; + nsSOCKSIOLayerMethods.bind = nsSOCKSIOLayerBind; + nsSOCKSIOLayerMethods.acceptread = nsSOCKSIOLayerAcceptRead; + nsSOCKSIOLayerMethods.getsockname = nsSOCKSIOLayerGetName; + nsSOCKSIOLayerMethods.getpeername = nsSOCKSIOLayerGetPeerName; + nsSOCKSIOLayerMethods.accept = nsSOCKSIOLayerAccept; + nsSOCKSIOLayerMethods.listen = nsSOCKSIOLayerListen; + nsSOCKSIOLayerMethods.close = nsSOCKSIOLayerClose; +