commit 076216c2db240a1101e26c7506ebd2f7e295dfb9 Author: Translation commit bot translation@torproject.org Date: Sat Dec 23 01:46:01 2017 +0000
Update translations for liveusb-creator_completed --- en_GB/en_GB.po | 797 +++++++++++++++++++++++++-------------------------------- 1 file changed, 347 insertions(+), 450 deletions(-)
diff --git a/en_GB/en_GB.po b/en_GB/en_GB.po index 11f4f3450..5063822fd 100644 --- a/en_GB/en_GB.po +++ b/en_GB/en_GB.po @@ -3,9 +3,9 @@ # This file is distributed under the same license as the PACKAGE package. # # Translators: -# Andi Chandler andi@gowling.com, 2014-2015 +# Andi Chandler andi@gowling.com, 2014-2015,2017 # Bruce Cowan bcowan@fastmail.co.uk, 2010 -# Foorack maxfaxalv@gmail.com, 2015 +# Foorack, 2015 # Isabell Long isabell@issyl0.co.uk, 2015 # eire123 jonnydennis10@gmail.com, 2013 # Richard Shaylor rshaylor@me.com, 2014 @@ -14,8 +14,8 @@ msgid "" msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2015-11-02 21:23+0100\n" -"PO-Revision-Date: 2016-03-21 16:31+0000\n" +"POT-Creation-Date: 2017-11-10 15:57+0100\n" +"PO-Revision-Date: 2017-12-23 01:41+0000\n" "Last-Translator: Andi Chandler andi@gowling.com\n" "Language-Team: English (United Kingdom) (http://www.transifex.com/otf/torproject/language/en_GB/)%5Cn" "MIME-Version: 1.0\n" @@ -24,591 +24,488 @@ msgstr "" "Language: en_GB\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451 -msgid ""Clone & Install"" -msgstr ""Clone & Install"" +#: ../tails_installer/creator.py:101 +msgid "You must run this application as root" +msgstr "You must run this application as root"
-#: ../liveusb/gui.py:453 -msgid ""Install from ISO"" -msgstr ""Install from ISO"" +#: ../tails_installer/creator.py:147 +msgid "Extracting live image to the target device..." +msgstr "Extracting live image to the target device..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153 +#: ../tails_installer/creator.py:154 #, python-format -msgid "%(distribution)s Installer" -msgstr "%(distribution)s Installer" +msgid "Wrote to device at %(speed)d MB/sec" +msgstr "Wrote to device at %(speed)d MB/sec"
-#: ../liveusb/gui.py:804 -#, python-format -msgid "%(filename)s selected" -msgstr "%(filename)s selected" +#: ../tails_installer/creator.py:184 +msgid "Setting up OLPC boot file..." +msgstr "Setting up OLPC boot file..."
-#: ../liveusb/gui.py:424 +#: ../tails_installer/creator.py:315 #, python-format -msgid "%(size)s %(label)s" -msgstr "%(size)s %(label)s" +msgid "" +"There was a problem executing the following command: `%(command)s`.\n" +"A more detailed error log has been written to '%(filename)s'." +msgstr "There was a problem executing the following command: `%(command)s`.\nA more detailed error log has been written to '%(filename)s'."
-#: ../liveusb/gui.py:430 -#, python-format -msgid "%(vendor)s %(model)s (%(details)s) - %(device)s" -msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s" +#: ../tails_installer/creator.py:334 +msgid "Verifying SHA1 checksum of LiveCD image..." +msgstr "Verifying SHA1 checksum of LiveCD image..."
-#: ../liveusb/creator.py:1097 -#, python-format -msgid "%s already bootable" -msgstr "%s already bootable" +#: ../tails_installer/creator.py:338 +msgid "Verifying SHA256 checksum of LiveCD image..." +msgstr "Verifying SHA256 checksum of LiveCD image..."
-#: ../liveusb/launcher_ui.py:160 +#: ../tails_installer/creator.py:354 msgid "" -"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n" -"<html><head><meta name="qrichtext" content="1" /><style type="text/css">\n" -"p, li { white-space: pre-wrap; }\n" -"</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">\n" -"<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Need help? Read the <a href="file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html"><span style=" text-decoration: underline; color:#0000ff;">documentation</span></a>.</p></body></html>" -msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name="qrichtext" content="1" /><style type="text/css">\np, li { white-space: pre-wrap; }\n</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;">\n<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Need help? Read the <a href="file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html"><span style=" text-decoration: underline; color:#0000ff;">documentation</span></a>.</p></body></html>" - -#: ../liveusb/launcher_ui.py:155 -msgid "" -"<ul>\n" -"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n" -"\n" -"<li>The USB stick that you install on is formatted and all data is lost.</li>\n" -"\n" -"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n" -"\n" -"</ul>" -msgstr "<ul>\n<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n\n<li>The USB stick that you install on is formatted and all data is lost.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n</ul>" +"Error: The SHA1 of your Live CD is invalid. You can run this program with " +"the --noverify argument to bypass this verification check." +msgstr "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check."
-#: ../liveusb/launcher_ui.py:157 -msgid "" -"<ul>\n" -"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n" -"\n" -"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n" -"\n" -"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n" -"\n" -"\n" -"</ul>" -msgstr "<ul>\n<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n\n</ul>" +#: ../tails_installer/creator.py:360 +msgid "Unknown ISO, skipping checksum verification" +msgstr "Unknown ISO, skipping checksum verification"
-#: ../liveusb/launcher_ui.py:159 +#: ../tails_installer/creator.py:371 +#, python-format msgid "" -"<ul>\n" -"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n" -"\n" -"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n" -"\n" -"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n" -"\n" -"</ul>" -msgstr "<ul>\n<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n</ul>" +"Not enough free space on device.\n" +"%dMB ISO + %dMB overlay > %dMB free space" +msgstr "Not enough free space on device.\n%dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/dialog.py:161 -msgid "Alt+B" -msgstr "Alt+B" +#: ../tails_installer/creator.py:378 +#, python-format +msgid "Creating %sMB persistent overlay" +msgstr "Creating %sMB persistent overlay"
-#: ../liveusb/dialog.py:160 -msgid "Browse" -msgstr "Browse" +#: ../tails_installer/creator.py:439 +#, python-format +msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s" +msgstr "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167 -msgid "" -"By allocating extra space on your USB stick for a persistent overlay, you " -"will be able to store data and make permanent modifications to your live " -"operating system. Without it, you will not be able to save data that will " -"persist after a reboot." -msgstr "By allocating extra space on your USB stick for a persistent overlay, you will be able to store data and make permanent modifications to your live operating system. Without it, you will not be able to save data that will persist after a reboot." +#: ../tails_installer/creator.py:453 +msgid "Removing existing Live OS" +msgstr "Remove existing Live OS"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459 +#: ../tails_installer/creator.py:462 ../tails_installer/creator.py:473 #, python-format -msgid "Calculating the SHA1 of %s" -msgstr "Calculating the SHA1 of %s" +msgid "Unable to chmod %(file)s: %(message)s" +msgstr "Unable to chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407 -msgid "Cannot find" -msgstr "Cannot find" +#: ../tails_installer/creator.py:466 +#, python-format +msgid "Unable to remove file from previous LiveOS: %(message)s" +msgstr "Unable to remove file from previous LiveOS: %(message)s"
-#: ../liveusb/creator.py:560 +#: ../tails_installer/creator.py:478 +#, python-format +msgid "Unable to remove directory from previous LiveOS: %(message)s" +msgstr "Unable to remove directory from previous LiveOS: %(message)s" + +#: ../tails_installer/creator.py:526 #, python-format msgid "Cannot find device %s" msgstr "Cannot find device %s"
-#: ../liveusb/creator.py:417 +#: ../tails_installer/creator.py:695 #, python-format -msgid "Creating %sMB persistent overlay" -msgstr "Creating %sMB persistent overlay" +msgid "Unable to write on %(device)s, skipping." +msgstr "Unable to write on %(device)s, skipping."
-#: ../liveusb/gui.py:582 +#: ../tails_installer/creator.py:719 +#, python-format msgid "" -"Device is not yet mounted, so we cannot determine the amount of free space." -msgstr "Device is not yet mounted, so we cannot determine the amount of free space." +"Some partitions of the target device %(device)s are mounted. They will be " +"unmounted before starting the installation process." +msgstr "Some partitions of the target device %(device)s are mounted. They will be unmounted before starting the installation process."
-#: ../liveusb/dialog.py:164 -#, python-format -msgid "Download %(distribution)s" -msgstr "Download %(distribution)s" +#: ../tails_installer/creator.py:762 ../tails_installer/creator.py:974 +msgid "Unknown filesystem. Your device may need to be reformatted." +msgstr "Unknown filesystem. Your device may need to be reformatted."
-#: ../liveusb/gui.py:778 -msgid "Download complete!" -msgstr "Download complete!" +#: ../tails_installer/creator.py:765 ../tails_installer/creator.py:977 +#, python-format +msgid "Unsupported filesystem: %s" +msgstr "Unsupported filesystem: %s"
-#: ../liveusb/gui.py:782 -msgid "Download failed: " -msgstr "Download failed: " +#: ../tails_installer/creator.py:782 +#, python-format +msgid "Unknown GLib exception while trying to mount device: %(message)s" +msgstr "Unknown GLib exception while trying to mount device: %(message)s"
-#: ../liveusb/gui.py:89 +#: ../tails_installer/creator.py:786 #, python-format -msgid "Downloading %s..." -msgstr "Downloading %s..." +msgid "Unable to mount device: %(message)s" +msgstr "Unable to mount device: %(message)s"
-#: ../liveusb/creator.py:1192 -msgid "Drive is a loopback, skipping MBR reset" -msgstr "Drive is a loopback, skipping MBR reset" +#: ../tails_installer/creator.py:791 +msgid "No mount points found" +msgstr "No mount points found"
-#: ../liveusb/creator.py:837 +#: ../tails_installer/creator.py:802 #, python-format msgid "Entering unmount_device for '%(device)s'" msgstr "Entering unmount_device for '%(device)s'"
-#: ../liveusb/creator.py:1272 -msgid "Error probing device" -msgstr "Error probing device" - -#: ../liveusb/gui.py:213 -msgid "" -"Error: Cannot set the label or obtain the UUID of your device. Unable to " -"continue." -msgstr "Error: Cannot set the label or obtain the UUID of your device. Unable to continue." - -#: ../liveusb/creator.py:393 -msgid "" -"Error: The SHA1 of your Live CD is invalid. You can run this program with " -"the --noverify argument to bypass this verification check." -msgstr "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check." - -#: ../liveusb/creator.py:155 -msgid "Extracting live image to the target device..." -msgstr "Extracting live image to the target device..." - -#: ../liveusb/creator.py:1140 +#: ../tails_installer/creator.py:812 #, python-format -msgid "Formatting %(device)s as FAT32" -msgstr "Formatting %(device)s as FAT32" +msgid "Unmounting mounted filesystems on '%(device)s'" +msgstr "Unmounting mounted filesystems on '%(device)s'"
-#: ../liveusb/creator.py:150 -msgid "ISO MD5 checksum passed" -msgstr "ISO MD5 checksum passed" +#: ../tails_installer/creator.py:816 +#, python-format +msgid "Unmounting '%(udi)s' on '%(device)s'" +msgstr "Unmounting '%(udi)s' on '%(device)s'"
-#: ../liveusb/creator.py:148 -msgid "ISO MD5 checksum verification failed" -msgstr "ISO MD5 checksum verification failed" +#: ../tails_installer/creator.py:826 +#, python-format +msgid "Mount %s exists after unmounting" +msgstr "Mount %s exists after unmounting"
-#: ../liveusb/dialog.py:163 -msgid "" -"If you do not select an existing Live ISO, the selected release will be " -"downloaded for you." -msgstr "If you do not select an existing Live ISO, the selected release will be downloaded for you." +#: ../tails_installer/creator.py:839 +#, python-format +msgid "Partitioning device %(device)s" +msgstr "Partitioning device %(device)s"
-#: ../liveusb/launcher_ui.py:154 -msgid "" -"Install\n" -"by cloning" -msgstr "Install\nby cloning" +#: ../tails_installer/creator.py:959 +#, python-format +msgid "Unsupported device '%(device)s', please report a bug." +msgstr "Unsupported device '%(device)s', please report a bug."
-#: ../liveusb/dialog.py:172 -msgid "Install Tails" -msgstr "Install Tails" +#: ../tails_installer/creator.py:962 +msgid "Trying to continue anyway." +msgstr "Trying to continue anyway."
-#: ../liveusb/gui.py:645 -msgid "Installation complete!" -msgstr "Installation complete!" +#: ../tails_installer/creator.py:971 ../tails_installer/creator.py:1364 +msgid "Verifying filesystem..." +msgstr "Verifying filesystem..."
-#: ../liveusb/gui.py:265 +#: ../tails_installer/creator.py:995 #, python-format -msgid "Installation complete! (%s)" -msgstr "Installation complete! (%s)" - -#: ../liveusb/gui.py:646 -msgid "Installation was completed. Press OK to close this program." -msgstr "Installation was completed. Press OK to close this program." +msgid "Unable to change volume label: %(message)s" +msgstr "Unable to change volume label: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313 +#: ../tails_installer/creator.py:1000 ../tails_installer/creator.py:1397 msgid "Installing bootloader..." msgstr "Installing bootloader..."
-#: ../liveusb/gui.py:454 +#: ../tails_installer/creator.py:1026 #, python-format -msgid "" -"It is impossible to upgrade the device %(pretty_name)s because it was not " -"created using Tails Installer. You should instead use %(action)s to upgrade " -"Tails on this device." -msgstr "It is impossible to upgrade the device %(pretty_name)s because it was not created using Tails Installer. You should instead use %(action)s to upgrade Tails on this device." - -#: ../liveusb/gui.py:270 -msgid "LiveUSB creation failed!" -msgstr "LiveUSB creation failed!" - -#: ../liveusb/creator.py:1408 -msgid "" -"Make sure to extract the entire liveusb-creator zip file before running this" -" program." -msgstr "Make sure to extract the entire liveusb-creator zip file before running this program." - -#: ../liveusb/creator.py:1284 -msgid "" -"Make sure your USB key is plugged in and formatted with the FAT filesystem" -msgstr "Make sure your USB key is plugged in and formatted with the FAT filesystem" +msgid "Could not find the '%s' COM32 module" +msgstr "Could not find the '%s' COM32 module"
-#: ../liveusb/creator.py:859 +#: ../tails_installer/creator.py:1034 ../tails_installer/creator.py:1415 #, python-format -msgid "Mount %s exists after unmounting" -msgstr "Mount %s exists after unmounting" +msgid "Removing %(file)s" +msgstr "Removing %(file)s"
-#: ../liveusb/gui.py:588 +#: ../tails_installer/creator.py:1146 #, python-format -msgid "No free space on device %(device)s" -msgstr "No free space on device %(device)s" +msgid "%s already bootable" +msgstr "%s already bootable"
-#: ../liveusb/creator.py:826 -msgid "No mount points found" -msgstr "No mount points found" +#: ../tails_installer/creator.py:1166 +msgid "Unable to find partition" +msgstr "Unable to find partition"
-#: ../liveusb/creator.py:410 +#: ../tails_installer/creator.py:1189 #, python-format -msgid "" -"Not enough free space on device.\n" -"%dMB ISO + %dMB overlay > %dMB free space" -msgstr "Not enough free space on device.\n%dMB ISO + %dMB overlay > %dMB free space" - -#: ../liveusb/gui.py:569 -msgid "Partition is FAT16; Restricting overlay size to 2G" -msgstr "Partition is FAT16; Restricting overlay size to 2G" +msgid "Formatting %(device)s as FAT32" +msgstr "Formatting %(device)s as FAT32"
-#: ../liveusb/gui.py:565 -msgid "Partition is FAT32; Restricting overlay size to 4G" -msgstr "Partition is FAT32; Restricting overlay size to 4G" +#: ../tails_installer/creator.py:1249 +msgid "Could not find syslinux' gptmbr.bin" +msgstr "Could not find syslinux' gptmbr.bin"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866 +#: ../tails_installer/creator.py:1262 #, python-format -msgid "Partitioning device %(device)s" -msgstr "Partitioning device %(device)s" - -#: ../liveusb/gui.py:636 -msgid "Persistent Storage" -msgstr "Persistent Storage" +msgid "Reading extracted MBR from %s" +msgstr "Reading extracted MBR from %s"
-#: ../liveusb/dialog.py:168 -msgid "Persistent Storage (0 MB)" -msgstr "Persistent Storage (0 MB)" - -#: ../liveusb/gui.py:698 ../liveusb/gui.py:727 -msgid "Please confirm your device selection" -msgstr "Please confirm your device selection" - -#: ../liveusb/gui.py:481 -msgid "Refreshing releases..." -msgstr "Refreshing releases..." - -#: ../liveusb/gui.py:486 -msgid "Releases updated!" -msgstr "Releases updated!" - -#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331 +#: ../tails_installer/creator.py:1266 #, python-format -msgid "Removing %(file)s" -msgstr "Removing %(file)s" - -#: ../liveusb/creator.py:492 -msgid "Removing existing Live OS" -msgstr "Remove existing Live OS" +msgid "Could not read the extracted MBR from %(path)s" +msgstr "Could not read the extracted MBR from %(path)s"
-#: ../liveusb/creator.py:1186 +#: ../tails_installer/creator.py:1279 ../tails_installer/creator.py:1280 #, python-format msgid "Resetting Master Boot Record of %s" msgstr "Resetting Master Boot Record of %s"
-#: ../liveusb/gui.py:789 -msgid "Select Live ISO" -msgstr "Select Live ISO" - -#: ../liveusb/creator.py:192 -msgid "Setting up OLPC boot file..." -msgstr "Setting up OLPC boot file..." +#: ../tails_installer/creator.py:1285 +msgid "Drive is a loopback, skipping MBR reset" +msgstr "Drive is a loopback, skipping MBR reset"
-#: ../liveusb/creator.py:742 +#: ../tails_installer/creator.py:1289 ../tails_installer/creator.py:1543 #, python-format -msgid "" -"Some partitions of the target device %(device)s are mounted. They will be " -"unmounted before starting the installation process." -msgstr "Some partitions of the target device %(device)s are mounted. They will be unmounted before starting the installation process." - -#: ../liveusb/creator.py:141 -msgid "" -"Source type does not support verification of ISO MD5 checksum, skipping" -msgstr "Source type does not support verification of ISO MD5 checksum, skipping" +msgid "Calculating the SHA1 of %s" +msgstr "Calculating the SHA1 of %s"
-#: ../liveusb/creator.py:1220 +#: ../tails_installer/creator.py:1314 msgid "Synchronizing data on disk..." msgstr "Synchronizing data on disk..."
-#: ../liveusb/dialog.py:166 -msgid "Target Device" -msgstr "Target Device" +#: ../tails_installer/creator.py:1356 +msgid "Error probing device" +msgstr "Error probing device"
-#: ../liveusb/gui.py:438 -#, python-format -msgid "" -"The device "%(pretty_name)s" is too small to install Tails (at least " -"%(size)s GB is required)." -msgstr "The device "%(pretty_name)s" is too small to install Tails (at least %(size)s GB is required)." +#: ../tails_installer/creator.py:1358 +msgid "Unable to find any supported device" +msgstr "Unable to find any supported device"
-#: ../liveusb/gui.py:792 +#: ../tails_installer/creator.py:1368 msgid "" -"The selected file is unreadable. Please fix its permissions or select " -"another file." -msgstr "The selected file is unreadable. Please fix its permissions or select another file." +"Make sure your USB key is plugged in and formatted with the FAT filesystem" +msgstr "Make sure your USB key is plugged in and formatted with the FAT filesystem"
-#: ../liveusb/creator.py:354 +#: ../tails_installer/creator.py:1371 #, python-format msgid "" -"There was a problem executing the following command: `%(command)s`.\n" -"A more detailed error log has been written to '%(filename)s'." -msgstr "There was a problem executing the following command: `%(command)s`.\nA more detailed error log has been written to '%(filename)s'." - -#: ../liveusb/dialog.py:158 -msgid "" -"This button allows you to browse for an existing Live system ISO that you " -"have previously downloaded. If you do not select one, a release will be " -"downloaded for you automatically." -msgstr "This button allows you to browse for an existing Live system ISO that you have previously downloaded. If you do not select one, a release will be downloaded for you automatically." +"Unsupported filesystem: %s\n" +"Please backup and format your USB key with the FAT filesystem." +msgstr "Unsupported filesystem: %s\nPlease backup and format your USB key with the FAT filesystem."
-#: ../liveusb/dialog.py:171 +#: ../tails_installer/creator.py:1438 msgid "" -"This button will begin the LiveUSB creation process. This entails " -"optionally downloading a release (if an existing one wasn't selected), " -"extracting the ISO to the USB device, creating the persistent overlay, and " -"installing the bootloader." -msgstr "This button will begin the LiveUSB creation process. This entails optionally downloading a release (if an existing one wasn't selected), extracting the ISO to the USB device, creating the persistent overlay, and installing the bootloader." +"Unable to get Win32_LogicalDisk; win32com query did not return any results" +msgstr "Unable to get Win32_LogicalDisk; win32com query did not return any results"
-#: ../liveusb/dialog.py:165 -msgid "" -"This is the USB stick that you want to install your Live system on. This " -"device must be formatted with the FAT filesystem." -msgstr "This is the USB stick that you want to install your Live system on. This device must be formatted with the FAT filesystem." +#: ../tails_installer/creator.py:1491 +msgid "Cannot find" +msgstr "Cannot find"
-#: ../liveusb/dialog.py:170 +#: ../tails_installer/creator.py:1492 msgid "" -"This is the progress bar that will indicate how far along in the LiveUSB " -"creation process you are" -msgstr "This is the progress bar that will indicate how far along in the LiveUSB creation process you are" - -#: ../liveusb/dialog.py:169 -msgid "This is the status console, where all messages get written to." -msgstr "This is the status console, where all messages get written to." - -#: ../liveusb/creator.py:952 -msgid "Trying to continue anyway." -msgstr "Trying to continue anyway." - -#: ../liveusb/gui.py:464 -msgid "USB drive found" -msgstr "USB drive found" +"Make sure to extract the entire tails-installer zip file before running this" +" program." +msgstr "Make sure to extract the entire tails-installer zip file before running this program."
-#: ../liveusb/creator.py:985 +#: ../tails_installer/gui.py:69 #, python-format -msgid "Unable to change volume label: %(message)s" -msgstr "Unable to change volume label: %(message)s" +msgid "Unknown release: %s" +msgstr "Unknown release: %s"
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512 +#: ../tails_installer/gui.py:73 #, python-format -msgid "Unable to chmod %(file)s: %(message)s" -msgstr "Unable to chmod %(file)s: %(message)s" +msgid "Downloading %s..." +msgstr "Downloading %s..."
-#: ../liveusb/creator.py:478 +#: ../tails_installer/gui.py:211 +msgid "" +"Error: Cannot set the label or obtain the UUID of your device. Unable to " +"continue." +msgstr "Error: Cannot set the label or obtain the UUID of your device. Unable to continue." + +#: ../tails_installer/gui.py:258 #, python-format -msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s" -msgstr "Unable to copy %(infile)s to %(outfile)s: %(message)s" +msgid "Installation complete! (%s)" +msgstr "Installation complete! (%s)"
-#: ../liveusb/gui.py:403 -msgid "Unable to find any USB drive" -msgstr "Unable to find any USB drive" +#: ../tails_installer/gui.py:263 +msgid "Tails installation failed!" +msgstr "Tails installation failed!"
-#: ../liveusb/creator.py:1274 -msgid "Unable to find any supported device" -msgstr "Unable to find any supported device" +#: ../tails_installer/gui.py:363 +msgid "" +"Warning: This tool needs to be run as an Administrator. To do this, right " +"click on the icon and open the Properties. Under the Compatibility tab, " +"check the "Run this program as an administrator" box." +msgstr "Warning: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the "Run this program as an administrator" box."
-#: ../liveusb/creator.py:1117 -msgid "Unable to find partition" -msgstr "Unable to find partition" +#: ../tails_installer/gui.py:375 +msgid "Tails Installer" +msgstr "Tails Installer"
-#: ../liveusb/creator.py:1354 -msgid "" -"Unable to get Win32_LogicalDisk; win32com query did not return any results" -msgstr "Unable to get Win32_LogicalDisk; win32com query did not return any results" +#: ../tails_installer/gui.py:456 +msgid "Upgrade" +msgstr "Upgrade"
-#: ../liveusb/gui.py:691 -msgid "Unable to mount device" -msgstr "Unable to mount device" +#: ../tails_installer/gui.py:462 ../data/tails-installer.ui.h:7 +msgid "Install" +msgstr "Install"
-#: ../liveusb/creator.py:814 +#: ../tails_installer/gui.py:469 #, python-format -msgid "Unable to mount device: %(message)s" -msgstr "Unable to mount device: %(message)s" +msgid "%(size)s %(vendor)s %(model)s device (%(device)s)" +msgstr "%(size)s %(vendor)s %(model)s device (%(device)s)"
-#: ../liveusb/creator.py:517 -#, python-format -msgid "Unable to remove directory from previous LiveOS: %(message)s" -msgstr "Unable to remove directory from previous LiveOS: %(message)s" +#: ../tails_installer/gui.py:481 +msgid "No ISO image selected" +msgstr "No ISO image selected"
-#: ../liveusb/creator.py:505 +#: ../tails_installer/gui.py:482 +msgid "Please select a Tails ISO image." +msgstr "Please select a Tails ISO image." + +#: ../tails_installer/gui.py:521 +msgid "No device suitable to install Tails could be found" +msgstr "No device suitable to install Tails could be found" + +#: ../tails_installer/gui.py:523 #, python-format -msgid "Unable to remove file from previous LiveOS: %(message)s" -msgstr "Unable to remove file from previous LiveOS: %(message)s" +msgid "Please plug a USB flash drive or SD card of at least %0.1f GB." +msgstr "Please plug a USB flash drive or SD card of at least %0.1f GB."
-#: ../liveusb/creator.py:1189 +#: ../tails_installer/gui.py:557 +#, python-format msgid "" -"Unable to reset MBR. You may not have the `syslinux` package installed." -msgstr "Unable to reset MBR. You may not have the `syslinux` package installed." +"The USB stick "%(pretty_name)s" is configured as non-removable by its " +"manufacturer and Tails will fail to start on it. Please try installing on a " +"different model." +msgstr "The USB stick "%(pretty_name)s" is configured as non-removable by its manufacturer and Tails will fail to start on it. Please try installing on a different model."
-#: ../liveusb/gui.py:798 +#: ../tails_installer/gui.py:567 +#, python-format msgid "" -"Unable to use the selected file. You may have better luck if you move your " -"ISO to the root of your drive (ie: C:\)" -msgstr "Unable to use the selected file. You may have better luck if you move your ISO to the root of your drive (ie: C:\)" +"The device "%(pretty_name)s" is too small to install Tails (at least " +"%(size)s GB is required)." +msgstr "The device "%(pretty_name)s" is too small to install Tails (at least %(size)s GB is required)."
-#: ../liveusb/creator.py:723 -#, python-format -msgid "Unable to write on %(device)s, skipping." -msgstr "Unable to write on %(device)s, skipping." +#: ../tails_installer/gui.py:589 +msgid "An error happened while installing Tails" +msgstr "An error happened while installing Tails"
-#: ../liveusb/creator.py:399 -msgid "Unknown ISO, skipping checksum verification" -msgstr "Unknown ISO, skipping checksum verification" +#: ../tails_installer/gui.py:601 +msgid "Refreshing releases..." +msgstr "Refreshing releases..."
-#: ../liveusb/creator.py:810 -#, python-format -msgid "Unknown dbus exception while trying to mount device: %(message)s" -msgstr "Unknown dbus exception while trying to mount device: %(message)s" +#: ../tails_installer/gui.py:606 +msgid "Releases updated!" +msgstr "Releases updated!"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964 -msgid "Unknown filesystem. Your device may need to be reformatted." -msgstr "Unknown filesystem. Your device may need to be reformatted." +#: ../tails_installer/gui.py:648 +msgid "Installation complete!" +msgstr "Installation complete!"
-#: ../liveusb/gui.py:85 -#, python-format -msgid "Unknown release: %s" -msgstr "Unknown release: %s" +#: ../tails_installer/gui.py:649 +msgid "Installation was completed." +msgstr "Installation was completed."
-#: ../liveusb/creator.py:851 -#, python-format -msgid "Unmounting '%(udi)s' on '%(device)s'" -msgstr "Unmounting '%(udi)s' on '%(device)s'" +#: ../tails_installer/gui.py:698 +msgid "Unable to mount device" +msgstr "Unable to mount device"
-#: ../liveusb/creator.py:847 -#, python-format -msgid "Unmounting mounted filesystems on '%(device)s'" -msgstr "Unmounting mounted filesystems on '%(device)s'" +#: ../tails_installer/gui.py:705 ../tails_installer/gui.py:735 +msgid "Confirm the target USB stick" +msgstr "Confirm the target USB stick"
-#: ../liveusb/creator.py:949 +#: ../tails_installer/gui.py:706 #, python-format -msgid "Unsupported device '%(device)s', please report a bug." -msgstr "Unsupported device '%(device)s', please report a bug." +msgid "" +"%(size)s %(vendor)s %(model)s device (%(device)s)\n" +"\n" +"All data on this USB stick will be lost." +msgstr "%(size)s %(vendor)s %(model)s device (%(device)s)\n\nAll data on this USB stick will be lost."
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967 +#: ../tails_installer/gui.py:722 #, python-format -msgid "Unsupported filesystem: %s" -msgstr "Unsupported filesystem: %s" +msgid "%(parent_size)s %(vendor)s %(model)s device (%(device)s)" +msgstr "%(parent_size)s %(vendor)s %(model)s device (%(device)s)"
-#: ../liveusb/creator.py:1287 -#, python-format +#: ../tails_installer/gui.py:730 msgid "" -"Unsupported filesystem: %s\n" -"Please backup and format your USB key with the FAT filesystem." -msgstr "Unsupported filesystem: %s\nPlease backup and format your USB key with the FAT filesystem." +"\n" +"\n" +"The persistent storage on this USB stick will be preserved." +msgstr "\n\nThe persistent storage on this USB stick will be preserved."
-#: ../liveusb/creator.py:892 +#: ../tails_installer/gui.py:731 #, python-format -msgid "Updating properties of system partition %(system_partition)s" -msgstr "Updating properties of system partition %(system_partition)s" +msgid "%(description)s%(persistence_message)s" +msgstr "%(description)s%(persistence_message)s"
-#: ../liveusb/launcher_ui.py:156 -msgid "" -"Upgrade\n" -"by cloning" -msgstr "Upgrade\nby cloning" +#: ../tails_installer/gui.py:781 +msgid "Download complete!" +msgstr "Download complete!"
-#: ../liveusb/launcher_ui.py:158 -msgid "" -"Upgrade\n" -"from ISO" -msgstr "Upgrade\nfrom ISO" +#: ../tails_installer/gui.py:785 +msgid "Download failed: " +msgstr "Download failed: "
-#: ../liveusb/dialog.py:159 -msgid "Use existing Live system ISO" -msgstr "Use existing Live system ISO" +#: ../tails_installer/gui.py:786 +msgid "You can try again to resume your download" +msgstr "You can try again to resume your download"
-#: ../liveusb/creator.py:143 -msgid "Verifying ISO MD5 checksum" -msgstr "Verifying ISO MD5 checksum" +#: ../tails_installer/gui.py:794 +msgid "" +"The selected file is unreadable. Please fix its permissions or select " +"another file." +msgstr "The selected file is unreadable. Please fix its permissions or select another file."
-#: ../liveusb/creator.py:373 -msgid "Verifying SHA1 checksum of LiveCD image..." -msgstr "Verifying SHA1 checksum of LiveCD image..." +#: ../tails_installer/gui.py:800 +msgid "" +"Unable to use the selected file. You may have better luck if you move your " +"ISO to the root of your drive (ie: C:\)" +msgstr "Unable to use the selected file. You may have better luck if you move your ISO to the root of your drive (ie: C:\)"
-#: ../liveusb/creator.py:377 -msgid "Verifying SHA256 checksum of LiveCD image..." -msgstr "Verifying SHA256 checksum of LiveCD image..." +#: ../tails_installer/gui.py:806 +#, python-format +msgid "%(filename)s selected" +msgstr "%(filename)s selected"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280 -msgid "Verifying filesystem..." -msgstr "Verifying filesystem..." +#: ../tails_installer/source.py:28 +msgid "Unable to find LiveOS on ISO" +msgstr "Unable to find LiveOS on ISO"
-#: ../liveusb/gui.py:725 -msgid "" -"Warning: Creating a new persistent overlay will delete your existing one." -msgstr "Warning: Creating a new persistent overlay will delete your existing one." +#: ../tails_installer/source.py:34 +#, python-format +msgid "Could not guess underlying block device: %s" +msgstr "Could not guess underlying block device: %s"
-#: ../liveusb/gui.py:377 +#: ../tails_installer/source.py:49 +#, python-format msgid "" -"Warning: This tool needs to be run as an Administrator. To do this, right " -"click on the icon and open the Properties. Under the Compatibility tab, " -"check the "Run this program as an administrator" box." -msgstr "Warning: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the "Run this program as an administrator" box." +"There was a problem executing `%s`.\n" +"%s\n" +"%s" +msgstr "There was a problem executing `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:162 +#: ../tails_installer/source.py:63 #, python-format -msgid "Wrote to device at %(speed)d MB/sec" -msgstr "Wrote to device at %(speed)d MB/sec" +msgid "'%s' does not exist" +msgstr "'%s' does not exist"
-#: ../liveusb/gui.py:699 +#: ../tails_installer/source.py:65 #, python-format -msgid "" -"You are going to install Tails on the %(size)s %(vendor)s %(model)s device " -"(%(device)s). All data on the selected device will be lost. Continue?" -msgstr "You are going to install Tails on the %(size)s %(vendor)s %(model)s device (%(device)s). All data on the selected device will be lost. Continue?" +msgid "'%s' is not a directory" +msgstr "'%s' is not a directory"
-#: ../liveusb/gui.py:715 +#: ../tails_installer/source.py:75 #, python-format -msgid "" -"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s " -"device (%(device)s). Any persistent volume on this device will remain " -"unchanged. Continue?" -msgstr "You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s device (%(device)s). Any persistent volume on this device will remain unchanged. Continue?" +msgid "Skipping '%(filename)s'" +msgstr "Skipping '%(filename)s'"
-#: ../liveusb/creator.py:622 +#: ../tails_installer/utils.py:44 +#, python-format msgid "" -"You are using an old version of syslinux-extlinux that does not support the " -"ext4 filesystem" -msgstr "You are using an old version of syslinux-extlinux that does not support the ext4 filesystem" +"There was a problem executing `%s`.%s\n" +"%s" +msgstr "There was a problem executing `%s`.%s\n%s"
-#: ../liveusb/gui.py:783 -msgid "You can try again to resume your download" -msgstr "You can try again to resume your download" +#: ../tails_installer/utils.py:124 +msgid "Could not open device for writing." +msgstr "Could not open device for writing."
-#: ../liveusb/creator.py:95 -msgid "You must run this application as root" -msgstr "You must run this application as root" +#: ../data/tails-installer.ui.h:1 +msgid "Installation Instructions" +msgstr "Installation Instructions" + +#: ../data/tails-installer.ui.h:2 +msgid "Clone the current Tails" +msgstr "Clone the current Tails" + +#: ../data/tails-installer.ui.h:3 +msgid "Use a downloaded Tails ISO image" +msgstr "Use a downloaded Tails ISO image" + +#: ../data/tails-installer.ui.h:4 +msgid "Select a distribution to download:" +msgstr "Select a distribution to download:" + +#: ../data/tails-installer.ui.h:5 +msgid "Target USB stick:" +msgstr "Target USB stick:"
-#: ../liveusb/dialog.py:162 -msgid "or" -msgstr "or" +#: ../data/tails-installer.ui.h:6 +msgid "Reinstall (delete all data)" +msgstr "Reinstall (delete all data)"