- tor-commits - lists.torproject.org

[translation/communitytpo-contentspot] https://gitweb.torproject.org/translation.git/commit/?h=communitytpo-contentspot
by translation＠torproject.org 03 Jun '20

03 Jun '20

commit 0313e13c8deed7f664a634e6ca6996080b40da35 Author: Translation commit bot <translation(a)torproject.org> Date: Wed Jun 3 16:45:33 2020 +0000 https://gitweb.torproject.org/translation.git/commit/?h=communitytpo-conten… --- contents+it.po | 3 +++ 1 file changed, 3 insertions(+) diff --git a/contents+it.po b/contents+it.po index a03d8524c3..c7569036d9 100644 --- a/contents+it.po +++ b/contents+it.po @@ -2024,6 +2024,9 @@ msgid "" "surveillance, for example, might attract more attention when reaching out " "other activists to run a digital security training." msgstr "" +"1. **Il tuo modello di minaccia.** Un activista di alto profilo e già molto " +"sorvegliato, per esempio, può attirare più attenzione quando si rivolge ad " +"altri attivisti per tenere una formazione sulla sicurezza digitale. " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.body)

1 0

[translation/communitytpo-contentspot] https://gitweb.torproject.org/translation.git/commit/?h=communitytpo-contentspot
by translation＠torproject.org 03 Jun '20

03 Jun '20

commit 8dca79438e992bb844c1f7aef4ae0133378327ca Author: Translation commit bot <translation(a)torproject.org> Date: Wed Jun 3 16:15:32 2020 +0000 https://gitweb.torproject.org/translation.git/commit/?h=communitytpo-conten… --- contents+it.po | 45 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-) diff --git a/contents+it.po b/contents+it.po index 7badd6f2ca..a03d8524c3 100644 --- a/contents+it.po +++ b/contents+it.po @@ -1667,6 +1667,8 @@ msgid "" "If you do not own physical hardware, you could run a relay on a rented " "dedicated server or virtual private server (VPS)." msgstr "" +"Se non possiedi hardware fisico, puoi gestire un relay da un server dedicato" +" in affitto o da un server privato virtuale (SPV). " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) @@ -1674,11 +1676,15 @@ msgid "" "This can cost anywhere between $3.00/month and thousands per month, " "depending on your provider, hardware configuration, and bandwidth usage." msgstr "" +"Il prezzo può andare dai 2.00/3.00 euro al mese alle migliaia di euro al " +"mese, a seconda del tuo provider, la configurazione del tuo hardware, e il " +"consumo di banda. " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) msgid "Many VPS providers will not allow you to run exit relays." msgstr "" +"Molti fornitori di SPV non ti permetteranno di gestire relay di uscita. " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) @@ -1686,6 +1692,8 @@ msgid "" "You must follow the VPS provider's terms of service, or risk having your " "account disabled." msgstr "" +"Devi attenerti ai termini di servizio del provider SPV, o rischierai che il " +"tuo account venga disabilitato. " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) @@ -1694,16 +1702,20 @@ msgid "" " relays, please see this list maintained by the Tor community: " "[GoodBadISPs](/relay/community-resources/good-bad-isps)." msgstr "" +"Per maggiori informazioni sugli hosting provider e le loro politiche sui " +"relay di Tor, vedi questa lista curata dalla comunità di Tor: [GoodBadISPs]" +" (/relay/community-resources/good-bad-isps)." #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) msgid "## Questions to consider when choosing a host" -msgstr "" +msgstr "## Domande da porsi quando si sceglie un host " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) msgid "* How much monthly traffic is included? Is bandwidth \"unmetered\"?" msgstr "" +"*Quanto traffico mensile è incluso? La larghezza di banda è \"illimitata\"? " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) @@ -1711,6 +1723,7 @@ msgid "" "* Does the hoster provide IPv6 connectivity? It is recommended, but not " "required." msgstr "" +"*L'hoster fornisce connettività IPv6? E' consigliato, ma non obbligatorio. " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) @@ -1725,6 +1738,8 @@ msgid "" "* Does the hoster start to throttle bandwidth after a certain amount of " "traffic?" msgstr "" +"* E' possibile che l'hoster inizi a tagliare la banda a disposizione oltre " +"una certa soglia di traffico? " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) @@ -1901,6 +1916,9 @@ msgid "" "you use the network time protocol (NTP) for time synchronization and ensure " "your timezone is set correctly." msgstr "" +"Impostare l'orario correttamente è essenziale per i relay di Tor. Ti " +"consigliamo di usare il network time protocol (NTP) per la sincronizzazione " +"dell'orario e assicurarti che il tuo fusorario sia impostato correttamente. " #: https//community.torproject.org/relay/getting-help/ #: (content/relay-operations/getting-help/contents+en.lrpage.title) @@ -1910,7 +1928,7 @@ msgstr "Ottieni aiuto" #: https//community.torproject.org/relay/getting-help/ #: (content/relay-operations/getting-help/contents+en.lrpage.subtitle) msgid "How to get help if you run into issues" -msgstr "" +msgstr "Come cercare aiuto in caso di problemi. " #: https//community.torproject.org/relay/getting-help/ #: (content/relay-operations/getting-help/contents+en.lrpage.body) @@ -1921,6 +1939,11 @@ msgid "" "The list is a great resource for asking (and answering) questions, and for " "getting to know other relay operators. Make sure to check out the archives!" msgstr "" +"Se hai problemi nel configurare il tuo relay, puoi fare domande sulla " +"[mailing list dei relay] pubblica (https://lists.torproject.org/cgi-" +"bin/mailman/listinfo/tor-relays). La mailing list è un'ottima risorsa per " +"fare (e rispondere a) domande, e per conoscere altri gestori di relay. " +"Assicurati di dare un'occhiata anche agli archivi! " #: https//community.torproject.org/relay/getting-help/ #: (content/relay-operations/getting-help/contents+en.lrpage.body) @@ -1928,6 +1951,8 @@ msgid "" "You can also get help by joining the IRC channel #tor-relays in the network " "[irc.oftc.net](https://support.torproject.org/get-in-touch/#irc-help)." msgstr "" +"Puoi anche chiedere aiuto unendoti al canale IRC #tor-relays nella rete " +"[irc.oftc.net](https://support.torproject.org/get-in-touch/#irc-help). " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.title) @@ -1939,6 +1964,8 @@ msgstr "Rischi" msgid "" "Things you should be aware of before running a digital security training." msgstr "" +"Cose di cui dovresti essere consapevole prima di tenere una formazione sulla" +" sicurezza digitale. " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.body) @@ -1946,6 +1973,8 @@ msgid "" "To our knowledge, no Tor trainer has ever faced consequences as a result of " "training others or speaking about Tor." msgstr "" +"Per quanto ne sappiamo, nessun formatore Tor ha mai subito conseguenze per " +"aver formato altri su o parlato di Tor. " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.body) @@ -1956,6 +1985,10 @@ msgid "" "threats, placement on government watch lists, and targeting for " "surveillance." msgstr "" +"Tuttavia, in alcuni paesi e in certe circostanze, è possibile che anche un " +"semplice raduno di difensori dei diritti umani sia rischioso, illegale, o " +"porti qualcuno a essere incarcerato, attaccato fisicamente, multato, " +"minacciato, messo sotto sorveglianza dal governo. " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.body) @@ -1965,6 +1998,10 @@ msgid "" "read this document and, in case of doubt, to reach out to the Tor Community " "Team privately." msgstr "" +"Se vuoi tenere una formazione su Tor per la prima volta e non sai come " +"valutare l'ambiente politico e sociale, ti incoraggiamo a leggere questo " +"documento e, in caso di dubbi, a rivolgerti in privato al Team della " +"Community di Tor. " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.body) @@ -1972,11 +2009,13 @@ msgid "" "Some potential risks of running a digital security training are only valid " "in specific contexts." msgstr "" +"Alcuni rischi potenziali di tenere una formazione sulla sicurezza digitale " +"sono validi soltanto in contesti specifici. " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.body) msgid "The potential risks associated with running a Tor training depend on:" -msgstr "" +msgstr "I rischi potenziali di tenere una formazione su Tor dipendono da: " #: https//community.torproject.org/training/risks/ #: (content/training/risks/contents+en.lrpage.body)

1 0

[translation/communitytpo-contentspot] https://gitweb.torproject.org/translation.git/commit/?h=communitytpo-contentspot
by translation＠torproject.org 03 Jun '20

03 Jun '20

commit bbd01d2b061abb606a7c530f3b7570e81be0bf5c Author: Translation commit bot <translation(a)torproject.org> Date: Wed Jun 3 15:45:30 2020 +0000 https://gitweb.torproject.org/translation.git/commit/?h=communitytpo-conten… --- contents+it.po | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/contents+it.po b/contents+it.po index 2b9b957d87..7badd6f2ca 100644 --- a/contents+it.po +++ b/contents+it.po @@ -1552,6 +1552,9 @@ msgid "" "users' connections. This can be either through maliciousness or " "misconfiguration." msgstr "" +"Un cattivo relay non funziona propriamente, o interferisce con le " +"connessioni degli utenti. Questo può avvenire perchè esso è maligno, o " +"perchè è male configurato." #: https//community.torproject.org/relay/community-resources/ #: (content/relay-operations/community-resources/contents+en.lrpage.body) @@ -1560,6 +1563,9 @@ msgid "" " all your help and vigilance! Learn how you can report [bad relays](bad-" "relays)." msgstr "" +"La nostra ampia comunità ci permette di individuare molti cattivi relay, " +"quindi grazie a tutti per l'aiuto e la vigilanza! Scopri come puoi segnalare" +" [cattivi relay] (bad-relays)." #: https//community.torproject.org/relay/community-resources/ #: (content/relay-operations/community-resources/contents+en.lrpage.body) @@ -1570,6 +1576,7 @@ msgstr "# Altre risorse" #: (content/relay-operations/community-resources/contents+en.lrpage.body) msgid "Congratulations, you're officially a Tor relay operator! What now?" msgstr "" +"Congratulazioni, sei officialmente il gestore di un relay Tor! E ora? " #: https//community.torproject.org/relay/community-resources/ #: (content/relay-operations/community-resources/contents+en.lrpage.body) @@ -1578,6 +1585,9 @@ msgid "" "[Relay Search](https://metrics.torproject.org/rs.html) (your relay will " "appear on \"Relay Search\" about 3 hours after you started it)." msgstr "" +"*Puoi visualizzare statistiche sul traffico del tuo relay al nostro [Relay " +"Search] (https://metrics.torproject.org/rs.html) (il tuo relay apparirà su " +"\"Relay Search\" circa 3 ore dopo che l'avrai attivato). " #: https//community.torproject.org/relay/community-resources/ #: (content/relay-operations/community-resources/contents+en.lrpage.body) @@ -1585,6 +1595,9 @@ msgid "" "* There is also more info about running a relay at the [Tor " "FAQ](https://2019.www.torproject.org/docs/faq.html.en#HowDoIDecide)." msgstr "" +"*Inoltre, puoi trovare più informazioni sulla gestione di un relay tra le " +"[FAQ di Tor] " +"(https://2019.www.torproject.org/docs/faq.html.en#HowDoIDecide)" #: https//community.torproject.org/relay/community-resources/ #: (content/relay-operations/community-resources/contents+en.lrpage.body) @@ -1593,6 +1606,10 @@ msgid "" " your swag](swag). It's our way of saying thanks for defending privacy and " "free speech online." msgstr "" +"* E, la cosa più importante, assicurati di mandare un'email a " +"tshirt(a)torproject.org e [richiedere il tuo swag] (swag). E' il nostro modo " +"di dirti grazie per la tua difesa della privacy e della libertà di parola " +"online. " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.title) @@ -1605,11 +1622,13 @@ msgid "" "How to choose a good hosting provider, what's an AS and Operating System " "diversity." msgstr "" +"Come scegliere un buon hosting provider, cosa sono un AS e la varietà di " +"Sistemi Operativi. " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) msgid "# Choosing a hosting provider" -msgstr "" +msgstr "# Scegliere un hosting provider" #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) @@ -1632,11 +1651,15 @@ msgid "" "You can host your own physical hardware at home (do NOT run a Tor exit relay" " from your home) or in a data center." msgstr "" +"Puoi tenere il tuo hardware a casa (ma NON operare un relay di uscita di Tor" +" da casa tua) o in un data center. " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body) msgid "Sometimes this is referred to as installing the relay on \"bare metal.\"" msgstr "" +"In questo caso si parla a volte di installare il relay sul \"nudo metallo\"." +" " #: https//community.torproject.org/relay/technical-considerations/ #: (content/relay-operations/technical-considerations/contents+en.lrpage.body)

1 0

[torspec/master] Walking onions proposal is completed.
by nickm＠torproject.org 03 Jun '20

03 Jun '20

commit 87eefe8c537bdbab2a34394ee094338e862e9d69 Author: Nick Mathewson <nickm(a)torproject.org> Date: Wed Jun 3 11:02:52 2020 -0400 Walking onions proposal is completed. Or at least, the first version of it. --- proposals/000-index.txt | 2 + proposals/323-walking-onions-full.md | 4113 ++++++++++++++++++++++++++++++++++ 2 files changed, 4115 insertions(+) diff --git a/proposals/000-index.txt b/proposals/000-index.txt index 512f64f..6e2e185 100644 --- a/proposals/000-index.txt +++ b/proposals/000-index.txt @@ -243,6 +243,7 @@ Proposals by number: 320 Removing TAP usage from v2 onion services [OPEN] 321 Better performance and usability for the MyFamily option (v2) [OPEN] 322 Extending link specifiers to include the directory port [OPEN] +323 Specification for Walking Onions [DRAFT] Proposals by status: @@ -260,6 +261,7 @@ Proposals by status: 312 Tor Relay Automatic IPv6 Address Discovery 313 Tor Relay IPv6 Statistics 316 FlashFlow: A Secure Speed Test for Tor (Parent Proposal) + 323 Specification for Walking Onions NEEDS-REVISION: 212 Increase Acceptable Consensus Age [for 0.2.4.x+] 219 Support for full DNS and DNSSEC resolution in Tor [for 0.2.5.x] diff --git a/proposals/323-walking-onions-full.md b/proposals/323-walking-onions-full.md new file mode 100644 index 0000000..d1c054d --- /dev/null +++ b/proposals/323-walking-onions-full.md @@ -0,0 +1,4113 @@ +``` +Filename: 323-walking-onions-full.md +Title: Specification for Walking Onions +Author: Nick Mathewson +Created: 3 June 2020 +Status: Draft +``` + + + <a id='S1'></a> + +# Introduction: A Specification for Walking Onions + +In Proposal 300, I introduced Walking Onions, a design for scaling +Tor and simplifying clients, by removing the requirement that every +client know about every relay on the network. + +This proposal will elaborate on the original Walking Onions idea, +and should provide enough detail to allow multiple compatible +implementations. In this introduction, I'll start by summarizing the +key ideas of Walking Onions, and then outline how the rest of this +proposal will be structured. + + <a id='S1.1'></a> + +## Remind me about Walking Onions again? + +With Tor's current design, every client downloads and refreshes a +set of directory documents that describe the directory authorities' +views about every single relay on the Tor network. This requirement +makes directory bandwidth usage grow quadratically, since the +directory size grows linearly with the number of relays, and it is +downloaded a number of times that grows linearly with the number of +clients. Additionally, low-bandwidth clients and bootstrapping +clients spend a disproportionate amount of their bandwidth loading +directory information. + +With these drawbacks, why does Tor still require clients to +download a directory? It does so in order to prevent attacks that +would be possible if clients let somebody else choose their +paths through the network, or if each client chose its paths from a +different subset of relays. + +Walking Onions is a design that resists these attacks without +requiring clients ever to have a complete view of the network. + +You can think of the Walking Onions design like this: Imagine that with +the current Tor design, the client covers a wall with little pieces +of paper, each representing a relay, and then throws a dart at the wall +to pick a relay. Low-bandwidth relays get small pieces of paper; +high-bandwidth relays get large pieces of paper. With the Walking +Onions design, however, the client throws its dart at a _blank +wall_, notes the position of the dart, and asks for the relay whose +paper _would be_ at that position on a "standard wall". These +"standard walls" are mapped out by directory authorities in advance, +and are authenticated in such a way that the client can receive a +proof of a relay's position on the wall without actually having to +know the whole wall. + +Because the client itself picks the position on the wall, and +because the authorities must vote together to build a set of +"standard walls", nobody else controls the client's path through the +network, and all clients can choose their paths in the same way. +But since clients only probe one position on the wall at a time, +they don't need to download a complete directory. + +(Note that there has to be more than one wall at a time: the client +throws darts at one wall to pick guards, another wall to pick +middle relays, and so on.) + +In Walking Onions, we call a collection of standard walls an +"ENDIVE" (Efficient Network Directory with Individually Verifiable +Entries). We call each of the individual walls a "routing index", +and we call each of the little pieces of paper describing a relay and +its position within the routing index a "SNIP" (Separable Network +Index Proof). + +For more details about the key ideas behind Walking Onions, see +proposal 300. For more detailed analysis and discussion, see +"Walking Onions: Scaling Anonymity Networks while Protecting Users" +by Komlo, Mathewson, and Goldberg. + + <a id='S1.2'></a> + +## The rest of this document + +This proposal is unusually long, since Walking Onions touches on many +aspects of Tor's functionality. It requires changes to voting, +directory formats, directory operations, circuit building, path +selection, client operations, and more. These changes are described in the +sections listed below. + +Here in section 1, we briefly reintroduce Walking Onions, and talk +about the rest of this proposal. + +Section 2 will describe the formats for ENDIVEs, SNIPs, and related +documents. + +Section 3 will describe new behavior for directory authorities as +they vote on and produce ENDIVEs. + +Section 4 describes how relays fetch and reconstruct ENDIVEs from +the directory authorities. + +Section 5 has the necessary changes to Tor's circuit extension +protocol so that clients can extend to relays by index position. + +Section 6 describes new behaviors for clients as they use Walking +Onions, to retain existing Tor functionality for circuit construction. + +Section 7 explains how to implement onion services using Walking +Onions. + +Section 8 describes small alterations in client and relay behavior +to strengthen clients against some kinds of attacks based on relays +picking among multiple ENDIVEs, while still making the voting +system robust against transient authority failures. + +Section 9 closes with a discussion of how to migrate from the +existing Tor design to the new system proposed here. + + <a id='S1.2.1'></a> + +### Appendices + +Additionally, this proposal has several appendices: + +Appendix A defines commonly used terms. + +Appendix B provides definitions for CDDL grammar productions that +are used elsewhere in the documents. + +Appendix C lists the new elements in the protocol that will require +assigned values. + +Appendix D lists new network parameters that authorities must vote +on. + +Appendix E gives a sorting algorithm for a subset of the CBOR object +representation. + +Appendix F gives an example set of possible "voting rules" that +authorities could use to produce an ENDIVE. + +Appendix G lists the different routing indices that will be required +in a Walking Onions deployment. + +Appendix H discusses partitioning TCP ports into a small number of +subsets, so that relays' exit policies can be represented only as +the group of ports that they support. + +Appendix Z closes with acknowledgments. + + <a id='S1.2.2'></a> + +### Related proposals + +The following proposals are not part of the Walking Onions proposal, +but they were written at the same time, and are either helpful or +necessary for its implementation. + +318-limit-protovers.md restricts the allowed version numbers for +each subprotocol to the range 0..63. + +319-wide-everything.md gives a general mechanism for splitting relay +commands across more than one cell. + +320-tap-out-again.md attempts to remove the need for TAP keys in +the HSv2 protocol. + +321-happy-families.md lets families be represented with a single +identifier, rather than a long list of keys + +322-dirport-linkspec.md allows a directory port to be represented +with a link specifier. + + <a id='S2'></a> + +# Document Formats: ENDIVEs and SNIPs + +Here we specify a pair of related document formats that we will +use for specifying SNIPs and ENDIVEs. + +Recall from proposal 300 that a SNIP is a set of information about +a single relay, plus proof from the directory authorities that the +given relay occupies a given range in a certain routing index. +For example, we can imagine that a SNIP might say: + +* Relay X has the following IP, port, and onion key. +* In the routing index Y, it occupies index positions 0x20002 + through 0x23000. +* This SNIP is valid on 2020-12-09 00:00:00, for one hour. +* Here is a signature of all the above text, using a threshold + signature algorithm. + +You can think of a SNIP as a signed combination of a routerstatus and +a microdescriptor... together with a little bit of the randomized +routing table from Tor's current path selection code, all wrapped +in a signature. + +Every relay keeps a set of SNIPs, and serves them to clients when +the client is extending by a routing index position. + +An ENDIVE is a complete set of SNIPs. Relays download ENDIVEs, or +diffs between ENDIVEs, once every voting period. We'll accept some +complexity in order to make these diffs small, even though some of the +information in them (particularly SNIP signatures and index +ranges) will tend to change with every period. + + <a id='S2.1'></a> + +## Preliminaries and scope + + <a id='S2.1.1'></a> + +### Goals for our formats + +We want SNIPs to be small, since they need to be sent on the wire +one at a time, and won't get much benefit from compression. (To +avoid a side-channel, we want CREATED cells to all be the same +size, which means we need to pad up to the largest size possible +for a SNIP.) + +We want to place as few requirements on clients as possible, and we +want to preserve forward compatibility. + +We want ENDIVEs to be compressible, and small. We want successive +ENDIVEs to be textually similar, so that we can use diffs to +transmit only the parts that change. + +We should preserve our policy of requiring only loose time +synchronization between clients and relays, and allow even looser +synchronization when possible. Where possible, we'll make the +permitted skew explicit in the protocol: for example, rather than +saying "you can accept a document 10 minutes before it is valid", we +will just make the validity interval start 10 minutes earlier. + + <a id='S2.1.2'></a> + +### Notes on Metaformat + +In the format descriptions below, we will describe a set of +documents in the CBOR metaformat, as specified in RFC 7049. If +you're not familiar with CBOR, you can think of it as a simple +binary version of JSON, optimized first for simplicity of +implementation and second for space. + +I've chosen CBOR because it's schema-free (you can parse it +without knowing what it is), terse, dumpable as text, extensible, +standardized, and very easy to parse and encode. + +We will choose to represent many size-critical types as maps whose +keys are short integers: this is slightly shorter in its encoding +than string-based dictionaries. In some cases, we make types even +shorter by using arrays rather than maps, but only when we are +confident we will not have to make changes to the number of elements +in the future. + +We'll use CDDL (defined in RFC 8610) to describe the data in a way +that can be validated -- and hopefully, in a way that will make it +comprehensible. (The state of CDDL tooling is a bit lacking at the +moment, so my CDDL validation will likely be imperfect.) + +We make the following restrictions to CBOR documents that Tor +implementations will _generate_: + + * No floating-point values are permitted. + + * No tags are allowed unless otherwise specified. + + * All items must follow the rules of RFC 7049 section 3.9 for + canonical encoding, unless otherwise specified. + +Implementations SHOULD accept and parse documents that are not +generated according to these rules, for future extensibility. +However, implementations SHOULD reject documents that are not +"well-formed" and "valid" by the definitions of RFC 7049. + + <a id='S2.1.3'></a> + +### Design overview: signing documents + +We try to use a single document-signing approach here, using a hash +function parameterized to accommodate lifespan information and an +optional nonce. + +All the signed CBOR data used in this format is represented as a +binary string, so that CBOR-processing tools are less likely to +re-encode or transform it. We denote this below with the CDDL syntax +`bstr .cbor Object`, which means "a binary string that must hold a valid +encoding of a CBOR object whose type is `Object`". + + <a id='S2.1.4'></a> + +### Design overview: SNIP Authentication + +I'm going to specify a flexible authentication format for SNIPs that +can handle threshold signatures, multisignatures, and Merkle trees. +This will give us flexibility in our choice of authentication +mechanism over time. + + * If we use Merkle trees, we can make ENDIVE diffs much much smaller, + and save a bunch of authority CPU -- at the expense of requiring + slightly larger SNIPs. + + * If Merkle tree root signatures are in SNIPs, SNIPs get a + bit larger, but they can be used by clients that do not have the + latest signed Merkle tree root. + + * If we use threshold signatures, we need to depend on + not-yet-quite-standardized algorithms. If we use multisignatures, + then either SNIPs get bigger, or we need to put the signed Merkle + tree roots into a consensus document. + +Of course, flexibility in signature formats is risky, since the more +code paths there are, the more opportunities there are for nasty bugs. +With this in mind, I'm structuring our authentication so that there +should (to the extent possible) be only a single validation path for +different uses. + +With this in mind, our format is structured so that "not using a +Merkle tree" is considered, from the client's point of view, the same as +"using a Merkle of depth 1". + +The authentication on a single snip is structured, in the abstract, as: + - ITEM: The item to be authenticated. + - PATH: A string of N bits, representing a path through a Merkle tree from + its root, where 0 indicates a left branch and 1 indicates a right + branch. (Note that in a left-leaning tree, the 0th leaf will have + path 000..0, the 1st leaf will have path 000..1, and so on.) + - BRANCH: A list of N digests, representing the digests for the + branches in the Merkle tree that we are _not_ taking. + - SIG: A generalized signature (either a threshold signature or a + multisignature) of a top-level digest. + - NONCE: an optional nonce for use with the hash functions. + +Note that PATH here is a bitstring, not an integer! "0001" and "01" are +different paths, and "" is a valid path, indicating the root of the tree. + +We assume two hash functions here: `H_leaf()` to be used with leaf +items, and `H_node()` to be used with intermediate nodes. These functions +are parameterized with a path through the tree, with +the lifespan of the object to be signed, and with a nonce. + +To validate the authentication on a SNIP, the client proceeds as follows: + + Algorithm: Validating SNIP authentication + + Let N = the length of PATH, in bits. + + Let H = H_leaf(PATH, LIFESPAN, NONCE, ITEM). + + While N > 0: + Remove the last bit of PATH; call it P. + Remove the last digest of BRANCH; call it B. + + If P is zero: + Let H = H_node(PATH, LIFESPAN, NONCE, H, B) + else: + Let H = H_node(PATH, LIFESPAN, NONCE, B, H) + + Let N = N - 1 + + Check wither SIG is a correct (multi)signature over H with the + correct key(s). + +Parameterization on this structure is up to the authorities. If N is +zero, then we are not using a Merkle tree. The generalize signature +SIG can either be given as part of the SNIP, or as part of a consensus +document. I expect that in practice, we will converge on a single set of +parameters here quickly (I'm favoring BLS signatures and a Merkle +tree), but using this format will give clients the flexibility to handle +other variations in the future. + +For our definition of `H_leaf()` and `H_node()`, see "Digests and +parameters" below. + + <a id='S2.1.5'></a> + +### Design overview: timestamps and validity. + +For future-proofing, SNIPs and ENDIVEs have separate time ranges +indicating when they are valid. Unlike with current designs, these +validity ranges should take clock skew into account, and should not +require clients or relays to deliberately add extra tolerance to their +processing. (For example, instead of saying that a document is "fresh" +for three hours and then telling clients to accept documents for 24 +hours before they are valid and 24 hours after they are expired, we will +simply make the documents valid for 51 hours.) + +We give each lifespan as a (PUBLISHED, PRE, POST) triple, such that +objects are valid from (PUBLISHED - PRE) through (PUBLISHED + POST). +(The "PUBLISHED" time is provided so that we can more reliably tell +which of two objects is more recent.) + +Later (see section 08), we'll explain measures to ensure that +hostile relays do not take advantage of multiple overlapping SNIP +lifetimes to attack clients. + + <a id='S2.1.6'></a> + +### Design overview: how the formats work together + +Authorities, as part of their current voting process, will produce an +ENDIVE. + +Relays will download this ENDIVE (either directly or as a diff), +validate it, and extract SNIPs from it. Extracting these SNIPs may be +trivial (if they are signed individually), or more complex (if they are +signed via a Merkle tree, and the Merkle tree needs to be +reconstructed). This complexity is acceptable only to the extent that +it reduces compressed diff size. + +Once the SNIPs are reconstructed, relays will hold them and serve them +to clients. + + <a id='S2.1.7'></a> + +### What isn't in this section + +This section doesn't tell you what the different routing indices +are or mean. For now, we can imagine there being one routing index for +guards, one for middles, and one for exits, and one for each hidden +service directory ring. (See section 06 for more on regular indices, +and section 07 for more on onion services.) + +This section doesn't give an algorithm for computing ENDIVEs from +votes, and doesn't give an algorithm for extracting SNIPs from an ENDIVE. +Those come later. (See sections 03 and 04 respectively.) + + <a id='S2.2'></a> + +## SNIPs + +Each SNIP has three pieces: the part of the SNIP that describes the +router, the part of that describes the SNIP's place within an ENDIVE, and +the part that authenticates the whole SNIP. + +Why two _separate_ authenticated pieces? Because one (the router +description) is taken verbatim from the ENDIVE, and the other +(the location within the ENDIVE) is computed from the ENDIVE by the +relays. Separating them like this helps ensure that the part +generated by the relay and the part generated by the authorities +can't interfere with each other. + + ; A SNIP, as it is sent from the relay to the client. Note that + ; this is represented as a three-element array. + SNIP = [ + ; First comes the signature. This is computed over + ; the concatenation of the two bstr objects below. + auth: SNIPSignature, + + ; Next comes the location of the SNIP within the ENDIVE. + index: bstr .cbor SNIPLocation, + + ; Finally comes the information about the router. + router: bstr .cbor SNIPRouterData, + ] + +(Computing the signature over a concatenation of objects is safe, since +the objects' content is self-describing CBOR, and isn't vulnerable to +framing issues.) + + <a id='S2.2.1'></a> + +### SNIPRouterData: information about a single router. + +Here we talk about the type that tells a client about a single +router. For cases where we are just storing information about a +router (for example, when using it as a guard), we can remember +this part, and discard the other pieces. + +The only required parts here are those that identify the router +and tell the client how to build a circuit through it. The others +are all optional. In practice, I expect they will be encoded in most +cases, but clients MUST behave properly if they are absent. + +More than one SNIPRouterData may exist in the same ENDIVE for a +single router. For example, there might be a longer version to +represent a router to be used as a guard, and another to represent +the same router when used as a hidden service directory. (This is +not possible in the voting mechanism that I'm working on, but relays +and clients MUST NOT treat this as an error.) + +This representation is based on the routerstats and +microdescriptor entries of today, but tries to omit a number of +obsolete fields, including RSA identity fingerprint, TAP key, +published time, etc. + + ; A SNIPRouterData is a map from integer keys to values for + ; those keys. + SNIPRouterData = { + ; identity key. + ? 0 => Ed25519PublicKey, + + ; ntor onion key. + ? 1 => Curve25519PublicKey, + + ; list of link specifiers other than the identity key. + ; If a client wants to extend to the same router later on, + ; they SHOULD include all of these link specifiers verbatim, + ; whether they recognize them or not. + ? 2 => [ LinkSpecifier ], + + ; The software that this relay says it is running. + ? 3 => SoftwareDescription, + + ; protovers. + ? 4 => ProtoVersions, + + ; Family. See below for notes on dual encoding. + ? 5 => [ * FamilyId ], + + ; Country Code + ? 6 => Country, + + ; Exit policies describing supported port _classes_. Absent exit + ; policies are treated as "deny all". + ? 7 => ExitPolicy, + + ; NOTE: Properly speaking, there should be a CDDL 'cut' + ; here, to indicate that the rules below should only match + ; if one if the previous rules hasn't matched. + ; Unfortunately, my CDDL tool doesn't seem to support cuts. + + ; For future tor extensions. + * int => any, + + ; For unofficial and experimental extensions. + * tstr => any, + } + + ; For future-proofing, we are allowing multiple ways to encode + ; families. One is as a list of other relays that are in your + ; family. One is as a list of authority-generated family + ; identifiers. And one is as a master key for a family (as in + ; Tor proposal 242). + ; + ; A client should consider two routers to be in the same + ; family if they have at least one FamilyId in common. + ; Authorities will canonicalize these lists. + FamilyId = bstr + + ; A country. These should ordinarily be 2-character strings, + ; but I don't want to enforce that. + Country = tstr; + + ; SoftwareDescription replaces our old "version". + SoftwareDescription = [ + software: tstr, + version: tstr, + extra: tstr + ] + + ; Protocol versions: after a bit of experimentation, I think + ; the most reasonable representation to use is a map from protocol + ; ID to a bitmask of the supported versions. + ProtoVersions = { ProtoId => ProtoBitmask } + + ; Integer protocols are reserved for future version of Tor. tstr ids + ; are reserved for experimental and non-tor extensions. + ProtoId = ProtoIdEnum / int / tstr + + ProtoIdEnum = &( + Link : 0, + LinkAuth : 1, + Relay : 2, + DirCache : 3, + HSDir : 4, + HSIntro : 5, + HSRend : 6, + Desc : 7, + MicroDesc: 8, + Cons : 9, + Padding : 10, + FlowCtrl : 11, + ) + ; This type is limited to 64 bits, and that's fine. If we ever + ; need a protocol version higher than 63, we should allocate a + ; new protoid. + ProtoBitmask = uint + + ; An exit policy may exist in up to two variants. When port classes + ; have not changed in a while, only one policy is needed. If port + ; classes have changed recently, however, then SNIPs need to include + ; each relay's position according to both the older and the newer policy + ; until older network parameter documents become invalid. + ExitPolicy = SinglePolicy / [ SinglePolicy, SinglePolicy ] + + ; Each single exit policy is a tagged bit array, whose bits + ; correspond to the members of the list of port classes in the + ; network parameter document with a corresponding tag. + SinglePolicy = [ + ; Identifies which group of port classes we're talking about + tag: unsigned, + ; Bit-array of which port classes this relay supports. + policy: bstr + ] + + <a id='S2.2.2'></a> + +### SNIPLocation: Locating a SNIP within a routing index. + +The SNIPLocation type can encode where a SNIP is located with +respect to one or more routing indices. Note that a SNIPLocation +does not need to be exhaustive: If a given IndexId is not listed for +a given relay in one SNIP, it might exist in another SNIP. Clients +should not infer that the absence of an IndexId in one SNIPLocation +for a relay means that no SNIPLocation with that IndexId exists for +the relay. + + ; SNIPLocation: we're using a map here because it's natural + ; to look up indices in maps. + SNIPLocation = { + ; The keys of this mapping represent the routing indices in + ; which a SNIP appears. The values represent the index ranges + ; that it occupies in those indices. + * IndexId => IndexRange / ExtensionIndex, + } + + ; We'll define the different index ranges as we go on with + ; these specifications. + ; + ; IndexId values over 65535 are reserved for extensions and + ; experimentation. + IndexId = uint32 + + ; An index range extends from a minimum to a maximum value. + ; These ranges are _inclusive_ on both sides. If 'hi' is less + ; than 'lo', then this index "wraps around" the end of the ring. + ; A "nil" value indicates an empty range, which would not + ; ordinarily be included. + IndexRange = [ lo: IndexPos, + hi: IndexPos ] / nil + + ; An ExtensionIndex is reserved for future use; current clients + ; will not understand it and current ENDIVEs will not contain it. + ExtensionIndex = any + + ; For most routing indices, the ranges are encoded as 4-byte integers. + ; But for hsdir rings, they are binary strings. (Clients and + ; relays SHOULD NOT require this.) + IndexPos = uint / bstr + +A bit more on IndexRanges: Every IndexRange actually describes a set of +_prefixes_ for possible index positions. For example, the IndexRange +`[ h'AB12', h'AB24' ]` includes all the binary strings that start with (hex) +`AB12`, `AB13`, and so on, up through all strings that start with `AB24`. +Alternatively, you can think of a `bstr`-based IndexRange *(lo, hi)* as +covering *lo*`00000...` through *hi*`ff...`. + +IndexRanges based on the uint type work the same, except that they always +specify the first 32 bits of a prefix. + + <a id='S2.2.3'></a> + +### SNIPSignature: How to prove a SNIP is in the ENDIVE. + +Here we describe the types for implementing SNIP signatures, to be +validated as described in "Design overview: Authentication" above. + + ; Most elements in a SNIPSignature are positional and fixed + SNIPSignature = [ + ; The actual signature or signatures. If this is a single signature, + ; it's probably a threshold signature. Otherwise, it's probably + ; a list containing one signature from each directory authority. + SingleSig / MultiSig, + + ; algorithm to use for the path through the merkle tree. + d_alg: DigestAlgorithm, + ; Path through merkle tree, possibly empty. + merkle_path: MerklePath, + + ; Lifespan information. This is included as part of the input + ; to the hash algorithm for the signature. + LifespanInfo, + + ; optional nonce for hash algorithm. + ? nonce: bstr, + + ; extensions for later use. These are not signed. + ? extensions: { * any => any }, + ] + + ; We use this group to indicate when an object originated, and when + ; it should be accepted. + ; + ; When we are using it as an input to a hash algorithm for computing + ; signatures, we encode it as an 8-byte number for "published", + ; followed by two 4-byte numbers for pre-valid and post-valid. + LifespanInfo = ( + ; Official publication time in seconds since the epoch. These + ; MUST be monotonically increasing over time for a given set of + ; authorities on all SNIPs or ENDIVEs that they generate: a + ; document with a greater `published` time is always more recent + ; than one with an earlier `published` time. + ; + ; Seeing a publication time "in the future" on a correctly + ; authenticated document is a reliable sign that your + ; clock is set too far in the past. + published: uint, + + ; Value to subtract from "published" in order to find the first second + ; at which this object should be accepted. + pre-valid: uint32, + + ; Value to add to "published" in order to find the last + ; second at which this object should be accepted. The + ; lifetime of an object is therefore equal to "(post-valid + + ; pre-valid)". + post-valid: uint32, + ) + + ; A Lifespan is just the fields of LifespanInfo, encoded as a list. + Lifespan = [ LifespanInfo ] + + ; One signature on a SNIP or ENDIVE. If the signature is a threshold + ; signature, or a reference to a signature in another + ; document, there will probably be just one of these per SNIP. But if + ; we're sticking a full multisignature in the document, this + ; is just one of the signatures on it. + SingleSig = [ + s_alg: SigningAlgorithm, + ; One of signature and sig_reference must be present. + ?signature: bstr, + ; sig_reference is an identifier for a signature that appears + ; elsewhere, and can be fetched on request. It should only be + ; used with signature types too large to attach to SNIPs on their + ; own. + ?sig_reference: bstr, + ; A prefix of the key or the key's digest, depending on the + ; algorithm. + ?keyid: bstr, + ] + + MultiSig = [ + SingleSig ] + + ; A Merkle path is represented as a sequence of bits to + ; indicate whether we're going left or right, and a list of + ; hashes for the parts of the tree that we aren't including. + ; + ; (It's safe to use a uint for the number of bits, since it will + ; never overflow 64 bits -- that would mean a Merkle tree with + ; too many leaves to actually calculate on.) + MerklePath = [ uint, *bstr ] + + <a id='S2.3'></a> + +## ENDIVEs: sending a bunch of SNIPs efficiently. + +ENDIVEs are delivered by the authorities in a compressed format, optimized +for diffs. + +Note that if we are using Merkle trees for SNIP authentication, ENDIVEs do +not include the trees at all, since those can be inferred from the leaves of +the tree. Similarly, the ENDIVEs do not include raw routing indices, but +instead include a set of bandwidths that can be combined into the routing +indices -- these bandwidths change less frequently, and therefore are more +diff-friendly. + +Note also that this format has more "wasted bytes" than SNIPs +do. Unlike SNIPs, ENDIVEs are large enough to benefit from +compression with with gzip, lzma2, or so on. + +This section does not fully specify how to construct SNIPs from an ENDIVE; +for the full algorithm, see section 04. + + ; ENDIVEs are also sent as CBOR. + ENDIVE = [ + ; Signature for the ENDIVE, using a simpler format than for + ; a SNIP. Since ENDIVEs are more like a consensus, we don't need + ; to use threshold signatures or Merkle paths here. + sig: ENDIVESignature, + + ; Contents, as a binary string. + body: encoded-cbor .cbor ENDIVEContent, + ] + + ; The set of signatures across an ENDIVE. + ; + ; This type doubles as the "detached signature" document used when + ; collecting signatures for a consensus. + ENDIVESignature = { + ; The actual signatures on the endive. A multisignature is the + ; likeliest format here. + endive_sig: [ + SingleSig ], + + ; Lifespan information. As with SNIPs, this is included as part + ; of the input to the hash algorithm for the signature. + ; Note that the lifespan of an ENDIVE is likely to be a subset + ; of the lifespan of its SNIPs. + endive_lifespan: Lifespan, + + ; Signatures across SNIPs, at some level of the Merkle tree. Note + ; that these signatures are not themselves signed -- having them + ; signed would take another step in the voting algorithm. + snip_sigs: DetachedSNIPSignatures, + + ; Signatures across the ParamDoc pieces. Note that as with the + ; DetachedSNIPSignatures, these signatures are not themselves signed. + param_doc: ParamDocSignature, + + ; extensions for later use. These are not signed. + * tstr => any, + } + + ; A list of single signatures or a list of multisignatures. This + ; list must have 2^signature-depth elements. + DetachedSNIPSignatures = + [ *SingleSig ] / [ *MultiSig ] + + ENDIVEContent = { + + ; Describes how to interpret the signatures over the SNIPs in this + ; ENDIVE. See section 04 for the full algorithm. + sig_params: { + ; When should we say that the signatures are valid? + lifespan: Lifespan, + ; Nonce to be used with the signing algorithm for the signatures. + ? signature-nonce: bstr, + + ; At what depth of a Merkle tree do the signatures apply? + ; (If this value is 0, then only the root of the tree is signed. + ; If this value is >= ceil(log2(n_leaves)), then every leaf is + ; signed.). + signature-depth: uint, + + ; What digest algorithm is used for calculating the signatures? + signature-digest-alg: DigestAlgorithm, + + ; reserved for future extensions. + * tstr => any, + }, + + ; Documents for clients/relays to learn about current network + ; parameters. + client-param-doc: encoded-cbor .cbor ClientParamDoc, + relay-param-doc: encoded-cbor .cbor RelayParamDoc, + + ; Definitions for index group. Each "index group" is all + ; applied to the same SNIPs. (If there is one index group, + ; then every relay is in at most one SNIP, and likely has several + ; indices. If there are multiple index groups, then relays + ; can appear in more than one SNIP.) + indexgroups: [ *IndexGroup ], + + ; Information on particular relays. + ; + ; (The total number of SNIPs identified by an ENDIVE is at most + ; len(indexgroups) * len(relays).) + relays: [ * ENDIVERouterData ], + + ; for future exensions + * tstr => any, + } + + ; An "index group" lists a bunch of routing indices that apply to the same + ; SNIPs. There may be multiple index groups when a relay needs to appear + ; in different SNIPs with routing indices for some reason. + IndexGroup = { + ; A list of all the indices that are built for this index group. + ; An IndexId may appear in at most one group per ENDIVE. + indices: [ + IndexId ], + ; A list of keys to delete from SNIPs to build this index group. + omit_from_snips: [ *(int/tstr) ], + ; A list of keys to forward from SNIPs to the next relay in an EXTEND + ; cell. This can help the next relay know which keys to use in its + ; handshake. + forward_with_extend: [ *(int/tstr) ], + + ; A number of "gaps" to place in the Merkle tree after the SNIPs + ; in this group. This can be used together with signature-depth + ; to give different index-groups independent signatures. + ? n_padding_entries: uint, + + ; A detailed description of how to build the index. + + IndexId => IndexSpec, + + ; For experimental and extension use. + * tstr => any, + } + + ; Enumeration to identify how to generate an index. + Indextype_Raw = 0 + Indextype_Weighted = 1 + Indextype_RSAId = 2 + Indextype_Ed25519Id = 3 + Indextype_RawNumeric = 4 + + ; An indexspec may be given as a raw set of index ranges. This is a + ; fallback for cases where we simply can't construct an index any other + ; way. + IndexSpec_Raw = { + type: Indextype_Raw, + ; This index is constructed by taking relays by their position in the + ; list from the list of ENDIVERouterData, and placing them at a given + ; location in the routing index. Each index range extends up to + ; right before the next index position. + index_ranges: [ * [ uint, IndexPos ] ], + } + + ; An indexspec given as a list of numeric spans on the index. + IndexSpec_RawNumeric = { + type: Indextype_RawNumeric, + first_index_pos: uint, + ; This index is constructed by taking relays by index from the list + ; of ENDIVERouterData, and giving them a certain amount of "weight" + ; in the index. + index_ranges: [ * [ idx: uint, span: uint ] ], + } + + ; This index is computed from the weighted bandwidths of all the SNIPs. + ; + ; Note that when a single bandwidth changes, it can change _all_ of + ; the indices in a bandwidth-weighted index, even if no other + ; bandwidth changes. That's why we only pack the bandwidths + ; here, and scale them as part of the reconstruction algorithm. + IndexSpec_Weighted = { + type: Indextype_Weighted, + ; This index is constructed by assigning a weight to each relay, + ; and then normalizing those weights. See algorithm below in section + ; 04. + ; Limiting bandwidth weights to uint32 makes reconstruction algorithms + ; much easier. + index_weights: [ * uint32 ], + } + + ; This index is computed from the RSA identity key digests of all of the + ; SNIPs. It is used in the HSv2 directory ring. + IndexSpec_RSAId = { + type: Indextype_RSAId, + ; How many bytes of RSA identity data go into each indexpos entry? + n_bytes: uint, + ; Bitmap of which routers should be included. + members: bstr, + } + + ; This index is computed from the Ed25519 identity keys of all of the + ; SNIPs. It is used in the HSv3 directory ring. + IndexSpec_Ed25519Id = { + type: Indextype_Ed25519Id, + ; How many bytes of digest go into each indexpos entry? + n_bytes: uint, + ; What digest do we use for building this ring? + d_alg: DigestAlgorithm, + ; What bytes do we give to the hash before the ed25519? + prefix: bstr, + ; What bytes do we give to the hash after the ed25519? + suffix: bstr, + ; Bitmap of which routers should be included. + members: bstr, + } + + IndexSpec = IndexSpec_Raw / + IndexSpec_RawNumeric / + IndexSpec_Weighted / + IndexSpec_RSAId / + IndexSpec_Ed25519Id + + ; Information about a single router in an ENDIVE. + ENDIVERouterData = { + ; The authority-generated SNIPRouterData for this router. + 1 => encoded-cbor .cbor SNIPRouterData, + ; The RSA identity, or a prefix of it, to use for HSv2 indices. + ? 2 => RSAIdentityFingerprint, + + * int => any, + * tstr => any, + } + + ; encoded-cbor is defined in the CDDL postlude as a bstr that is + ; tagged as holding verbatim CBOR: + ; + ; encoded-cbor = #6.24(bstr) + ; + ; Using a tag like this helps tools that validate the string as + ; valid CBOR; using a bstr helps indicate that the signed data + ; should not be interpreted until after the signature is checked. + ; It also helps diff tools know that they should look inside these + ; objects. + + <a id='S2.4'></a> + +## Network parameter documents + +Network parameter documents ("ParamDocs" for short) take the place of the +current consensus and certificates as a small document that clients and +relays need to download periodically and keep up-to-date. They are generated +as part of the voting process, and contain fields like network parameters, +recommended versions, authority certificates, and so on. + + ; A "parameter document" is like a tiny consensus that relays and clients + ; can use to get network parameters. + ParamDoc = [ + sig: ParamDocSignature, + ; Client-relevant portion of the parameter document. Everybody fetches + ; this. + cbody: encoded-cbor .cbor ClientParamDoc, + ; Relay-relevant portion of the parameter document. Only relays need to + ; fetch this; the document can be validated without it. + ? sbody: encoded-cbor .cbor RelayParamDoc, + ] + ParamDocSignature = [ + ; Multisignature or threshold signature of the concatenation + ; of the two digests below. + SingleSig / MultiSig, + + ; Lifespan information. As with SNIPs, this is included as part + ; of the input to the hash algorithm for the signature. + ; Note that the lifespan of a parameter document is likely to be + ; very long. + LifespanInfo, + + ; how are c_digest and s_digest computed? + d_alg: DigestAlgorithm, + ; Digest over the cbody field + c_digest: bstr, + ; Digest over the sbody field + s_digest: bstr, + ] + + ClientParamDoc = { + params: NetParams, + ; List of certificates for all the voters. These + ; authenticate the keys used to sign SNIPs and ENDIVEs and votes, + ; using the authorities' longest-term identity keys. + voters: [ + bstr .cbor VoterCert ], + + ; A division of exit ports into "classes" of ports. + port-classes: PortClasses, + + ; As in client-versions from dir-spec.txt + ? recommend-versions: [ * tstr ], + ; As in recommended-client-protocols in dir-spec.txt + ? recommend-protos: ProtoVersions, + ; As in required-client-protocols in dir-spec.txt + ? require-protos: ProtoVersions, + + ; For future extensions. + * tstr => any, + } + + RelayParamDoc = { + params: NetParams, + + ; As in server-versions from dir-spec.txt + ? recommend-versions: [ * tstr ], + ; As in recommended-relay-protocols in dir-spec.txt + ? recommend-protos: ProtoVersions, + ; As in required-relay-protocols in dir-spec.txt + ? require-versions: ProtoVersions, + + * tstr => any, + } + + ; A NetParams encodes information about the Tor network that + ; clients and relays need in order to participate in it. The + ; current list of parameters is described in the "params" field + ; as specified in dir-spec.txt. + ; + ; Note that there are separate client and relay NetParams now. + ; Relays are expected to first check for a defintion in the + ; RelayParamDoc, and then in the ClientParamDoc. + NetParams = { *tstr => int } + + PortClasses = { + ; identifies which port class grouping this is. Used to migrate + ; from one group of port classes to another. + tag: uint, + ; list of the port classes. + classes: { * IndexId => PortList }, + } + PortList = [ *PortOrRange ] + ; Either a single port or a low-high pair + PortOrRange = Port / [ Port, Port ] + Port = 1...65535 + + <a id='S2.5'></a> + +## Certificates + +Voting certificates are used to bind authorities' long-term +identities to shorter-term signing keys. These have a similar +purpose to the authority certs made for the existing voting +algorithm, but support more key types. + + ; A 'voter certificate' is a statement by an authority binding keys to + ; each other. + VoterCert = [ + + ; One or more signatures over `content` using the provided lifetime. + ; Each signature should be treated independently. + [ + SingleSig ], + ; A lifetime value, used (as usual ) as an input to the + ; signature algorithm. + LifespanInfo, + ; The keys and other data to be certified. + content: encoded-cbor .cbor CertContent, + ] + + ; The contents of the certificate that get signed. + CertContent = { + ; What kind of a certificate is this? + type: CertType, + ; A list of keys that are being certified in this document + keys: [ + CertifiedKey ], + ; A list of other keys that you might need to know about, which + ; are NOT certififed in this document. + ? extra: [ + CertifiedKey ], + * tstr => any, + } + + CertifiedKey = { + ; What is the intended usage of this key? + usage: KeyUsage, + ; What cryptographic algorithm is this key used for? + alg: PKAlgorithm, + ; The actual key being certified. + data: bstr, + ; A human readable string. + ? remarks: tstr, + * tstr => any, + } + + <a id='S2.6'></a> + +## ENDIVE diffs + +Here is a binary format to be used with ENDIVEs, ParamDocs, and any +other similar binary formats. Authorities and directory caches need to +be able to generate it; clients and non-cache relays only need to be +able to parse and apply it. + + ; Binary diff specification. + BinaryDiff = { + ; This is version 1. + v: 1, + ; Optionally, a diff can say what different digests + ; of the document should be before and after it is applied. + ; If there is more than one entry, parties MAY check one or + ; all of them. + ? digest: { * DigestAlgorithm => + [ pre: Digest, + post: Digest ]}, + + ; Optionally, a diff can give some information to identify + ; which document it applies to, and what document you get + ; from applying it. These might be a tuple of a document type + ; and a publication type. + ? ident: [ pre: any, post: any ], + + ; list of commands to apply in order to the original document in + ; order to get the transformed document + cmds: [ *DiffCommand ], + + ; for future extension. + * tstr => any, + } + + ; There are currently only two diff commands. + ; One is to copy some bytes from the original. + CopyDiffCommand = [ + OrigBytesCmdId, + ; Range of bytes to copy from the original document. + ; Ranges include their starting byte. The "offset" is relative to + ; the end of the _last_ range that was copied. + offset: int, + length: uint, + ] + + ; The other diff comment is to insert some bytes from the diff. + InsertDiffCommand = [ + InsertBytesCmdId, + data: bstr, + ] + + DiffCommand = CopyDiffCommand / InsertDiffCommand + + OrigBytesCmdId = 0 + InsertBytesCmdId = 1 + +Applying a binary diff is simple: + + Algorithm: applying a binary diff. + + (Given an input bytestring INP and a diff D, produces an output OUT.) + + Initialize OUT to an empty bytestring. + + Set OFFSET to 0. + + For each command C in D.commands, in order: + + If C begins with OrigBytesCmdId: + Increase "OFFSET" by C.offset + If OFFSET..OFFSET+C.length is not a valid range in + INP, abort. + Append INP[OFFSET .. OFFSET+C.length] to OUT. + Increase "OFFSET" by C.length + + else: # C begins with InsertBytesCmdId: + Append C.data to OUT. + +Generating a binary diff can be trickier, and is not specified here. +There are several generic algorithms out there for making binary diffs +between arbitrary byte sequences. Since these are complex, I recommend a +chunk-based CBOR-aware algorithm, using each CBOR item in a similar way +to the way in which our current line-oriented code uses lines. When +encountering a bstr tagged with "encoded-cbor", the diff algorithm +should look inside it to find more cbor chunks. (See +example-code/cbor_diff.py for an example of doing this with Python's +difflib.) + +The diff format above should work equally well no matter what +diff algorithm is used, so we have room to move to other algorithms +in the future if needed. + +To indicate support for the above diff format in directory requests, +implementations should use an `X-Support-Diff-Formats` header. The +above format is designated "cbor-bindiff"; our existing format is +called "ed". + + <a id='S2.7'></a> + +## Digests and parameters + +Here we give definitions for `H_leaf()` and `H_node()`, based on an +underlying digest function H() with a preferred input block size of B. +(B should be chosen as the natural input size of the hash function, to +aid in precomputation.) + +We also define `H_sign()`, to be used outside of SNIP authentication +where we aren't using a Merkle tree at all. + +PATH must be no more than 64 bits long. NONCE must be no more than B-33 +bytes long. + + H_sign(LIFESPAN, NONCE, ITEM) = + H( PREFIX(OTHER_C, LIFESPAN, NONCE) || ITEM) + + H_leaf(PATH, LIFESPAN, NONCE, ITEM) = + H( PREFIX(LEAF_C, LIFESPAN, NONCE) || + U64(PATH) || + U64(bits(path)) || + ITEM ) + + H_node(PATH, LIFESPAN, NONCE, ITEM) = + H( PREFIX(NODE_C, LIFESPAN, NONCE) || + U64(PATH) || + U64(bits(PATH)) || + ITEM ) + + PREFIX(leafcode, lifespan, nonce) = + U64(leafcode) || + U64(lifespan.published) || + U32(lifespan.pre-valid) || + U32(lifespan.post-valid) || + U8(len(nonce)) || + nonce || + Z(B - 33 - len(nonce)) + + LEAF_C = 0x8BFF0F687F4DC6A1 ^ NETCONST + NODE_C = 0xA6F7933D3E6B60DB ^ NETCONST + OTHER_C = 0x7365706172617465 ^ NETCONST + + # For the live Tor network only. + NETCONST = 0x0746f72202020202 + # For testing networks, by default. + NETCONST = 0x74657374696e6720 + + U64(n) -- N encoded as a big-endian 64-bit number. + Z(n) -- N bytes with value zero. + len(b) -- the number of bytes in a byte-string b. + bits(b) -- the number of bits in a bit-string b. + + + <a id='S3'></a> + +# Directory authority operations + +For Walking Onions to work, authorities must begin to generate +ENDIVEs as a new kind of "consensus document". Since this format is +incompatible with the previous consensus document formats, and is +CBOR-based, a text-based voting protocol is no longer appropriate +for generating it. + +We cannot immediately abandon the text-based consensus and +microdescriptor formats, but instead will need to keep +generating them for legacy relays and clients. Ideally, process +that produces the ENDIVE should also produce a legacy consensus, +to limit the amount of divergence in their contents. + +Further, it would be good for the purposes of this proposal if we +can "inherit" as much as possible of our existing voting mechanism +for legacy purposes. + +This section of the proposal will try to solve these goals by defining a +new binary-based voting format, a new set of voting rules for it, and a +series of migration steps. + + <a id='S3.1'></a> + +## Overview + +Except as described below, we retain from Tor's existing voting +mechanism all notions of how votes are transferred and processed. +Other changes are likely desirable, but they are out of scope for +this proposal. + +Notably, we are not changing how the voting schedule works. Nor are +we changing the property that all authorities must agree on the list +of authorities; the property that a consensus is computed as a +deterministic function of a set of votes; or the property that if +authorities believe in different sets of votes, they will not reach +the same consensus. + +The principal changes in the voting that are relevant for legacy +consensus computation are: + + * The uploading process for votes now supports negotiation, so + that the receiving authority can tell the uploading authority + what kind of formats, diffs, and compression it supports. + + * We specify a CBOR-based binary format for votes, with a simple + embedding method for the legacy text format. This embedding is + meant for transitional use only; once all authorities support + the binary format, the transitional format and its support + structures can be abandoned. + + * To reduce complexity, the new vote format also includes + _verbatim_ microdescriptors, whereas previously microdescriptors + would have been referenced by hash. (The use of diffs and + compression should make the bandwidth impact of this addition + negligible.) + +For computing ENDIVEs, the principal changes in voting are: + + * The consensus outputs for most voteable objects are specified in a + way that does not require the authorities to understand their + semantics when computing a consensus. This should make it + easier to change fields without requiring new consensus methods. + + <a id='S3.2'></a> + +## Negotiating vote uploads + +Authorities supporting Walking Onions are required to support a new +resource "/tor/auth-vote-opts". This resource is a text document +containing a list of HTTP-style headers. Recognized headers are +described below; unrecognized headers MUST be ignored. + +The *Accept-Encoding* header follows the same format as the HTTP +header of the same name; it indicates a list of Content-Encodings +that the authority will accept for uploads. All authorities SHOULD +support the gzip and identity encodings. The identity encoding is +mandatory. (Default: "identity") + +The *Accept-Vote-Diffs-From* header is a list of digests of previous +votes held by this authority; any new uploaded votes that are given +as diffs from one of these old votes SHOULD be accepted. The format +is a space-separated list of "digestname:Hexdigest". (Default: "".) + +The *Accept-Vote-Formats* header is a space-separated list of the +vote formats that this router accepts. The recognized vote formats +are "legacy-3" (Tor's current vote format) and "endive-1" (the vote +format described here). Unrecognized vote formats MUST be ignored. +(Default: "legacy-3".) + +If requesting "/tor/auth-vote-opts" gives an error, or if one or +more headers are missing, the default values SHOULD be used. These +documents (or their absence) MAY be cached for up to 2 voting +periods.) + +Authorities supporting Walking Onions SHOULD also support the +"Connection: keep-alive" and "Keep-Alive" HTTP headers, to avoid +needless reconnections in response to these requests. +Implementors SHOULD be aware of potential denial-of-service +attacks based on open HTTP connections, and mitigate them as +appropriate. + +> Note: I thought about using OPTIONS here, but OPTIONS isn't quite +> right for this, since Accept-Vote-Diffs-From does not fit with its +> semantics. + +> Note: It might be desirable to support this negotiation for legacy +> votes as well, even before walking onions is implemented. Doing so +> would allow us to reduce authority bandwidth a little, and possibly +> include microdescriptors in votes for more convenient processing. + + <a id='S3.3'></a> + +## A generalized algorithm for voting + +Unlike with previous versions of our voting specification, here I'm +going to try to describe pieces the voting algorithm in terms of +simpler voting operations. Each voting operation will be named and +possibly parameterized, and data will frequently self-describe what +voting operation is to be used on it. + +Voting operations may operate over different CBOR types, and are +themselves specified as CBOR objects. + +A voting operation takes place over a given "voteable field". Each +authority that specifies a value for a voteable field MUST specify +which voting operation to use for that field. Specifying a voteable +field without a voting operation MUST be taken as specifying the +voting operation "None" -- that is, voting against a consensus. + +On the other hand, an authority MAY specify a voting operation for +a field without casting any vote for it. This means that the +authority has an opinion on how to reach a consensus about the +field, without having any preferred value for the field itself. + + <a id='S3.3.1'></a> + +### Constants used with voting operations + +Many voting operations may be parameterized by an unsigned integer. +In some cases the integers are constant, but in others, they depend +on the number of authorities, the number of votes cast, or the +number of votes cast for a particular field. + +When we encode these values, we encode them as short strings +rather than as integers. + +> I had thought of using negative integers here to encode these +> special constants, but that seems too error-prone. + +The following constants are defined: + +`N_AUTH` -- the total number of authorities, including those whose +votes are absent. + +`N_PRESENT` -- the total number of authorities whose votes are +present for this vote. + +`N_FIELD` -- the total number of authorities whose votes for a given +field are present. + +Necessarily, `N_FIELD` <= `N_PRESENT` <= `N_AUTH` -- you can't vote +on a field unless you've cast a vote, and you can't cast a vote +unless you're an authority. + +In the definitions below, `//` denotes the truncating integer division +operation, as implemented with `/` in C. + +`QUORUM_AUTH` -- The lowest integer that is greater than half of +`N_AUTH`. Equivalent to `N_AUTH // 2 + 1`. + +`QUORUM_PRESENT` -- The lowest integer that is greater than half of +`N_PRESENT`. Equivalent to `N_PRESENT // 2 + 1`. + +`QUORUM_FIELD` -- The lowest integer that is greater than half of +`N_FIELD`. Equivalent to `N_FIELD // 2 + 1`. + +We define `SUPERQUORUM_`..., variants of these fields as well, based +on the lowest integer that is greater than 2/3 majority of the +underlying field. `SUPERQUORUM_x` is thus equivalent to +`(N_x * 2) // 3 + 1`. + + ; We need to encode these arguments; we do so as short strings. + IntOpArgument = uint / "auth" / "present" / "field" / + "qauth" / "qpresent" / "qfield" / + "sqauth" / "sqpresent" / "sqfield" + +No IntOpArgument may be greater than AUTH. If an IntOpArgument is +given as an integer, and that integer is greater than AUTH, then it +is treated as if it were AUTH. + +> This rule lets us say things like "at least 3 authorities must +> vote on x...if there are 3 authorities." + + <a id='S3.3.2'></a> + +### Producing consensus on a field + +Each voting operation will either produce a CBOR output, or produce +no consensus. Unless otherwise stated, all CBOR outputs are to be +given in canonical form. + +Below we specify a number of operations, and the parameters that +they take. We begin with operations that apply to "simple" values +(integers and binary strings), then show how to compose them to +larger values. + +All of the descriptions below show how to apply a _single_ voting +operation to a set of votes. We will later describe how to behave when +the authorities do not agree on which voting operation to use, in our +discussion of the StructJoinOp operation. + +Note that while some voting operations take other operations as +parameters, we are _not_ supporting full recursion here: there is a +strict hierarchy of operations, and more complex operations can only +have simpler operations in their parameters. + +All voting operations follow this metaformat: + + ; All a generic voting operation has to do is say what kind it is. + GenericVotingOp = { + op: tstr, + * tstr => any, + } + +Note that some voting operations require a sort or comparison +operation over CBOR values. This operation is defined later in +appendix E; it works only on homogeneous inputs. + + <a id='S3.3.3'></a> + +### Generic voting operations + + <a id='S3.3.3.1'></a> + +#### None + +This voting operation takes no parameters, and always produces "no +consensus". It is encoded as: + + ; "Don't produce a consensus". + NoneOp = { op: "None" } + +When encountering an unrecognized or nonconforming voting operation, +_or one which is not recognized by the consensus-method in use_, the +authorities proceed as if the operation had been "None". + + <a id='S3.3.4'></a> + +### Voting operations for simple values + +We define a "simple value" according to these cddl rules: + + ; Simple values are primitive types, and tuples of primitive types. + SimpleVal = BasicVal / SimpleTupleVal + BasicVal = bool / int / bstr / tstr + SimpleTupleVal = [ *BasicVal ] + +We also need the ability to encode the types for these values: + + ; Encoding a simple type. + SimpleType = BasicType / SimpleTupleType + BasicType = "bool" / "uint" / "sint" / "bstr" / "tstr" + SimpleTupleType = [ "tuple", *BasicType ] + +In other words, a SimpleVal is either an non-compound base value, or is +a tuple of such values. + + ; We encode these operations as: + SimpleOp = MedianOp / ModeOp / ThresholdOp / + BitThresholdOp / CborSimpleOp / NoneOp + +We define each of these operations in the sections below. + + <a id='S3.3.4.1'></a> + +#### Median + +_Parameters_: `MIN_VOTES` (an integer), `BREAK_EVEN_LOW` (a boolean), +`TYPE` (a SimpleType) + + ; Encoding: + MedianOp = { op: "Median", + ? min_vote: IntOpArgument, ; Default is 1. + ? even_low: bool, ; Default is true. + type: SimpleType } + +Discard all votes that are not of the specified `TYPE`. If there are +fewer than `MIN_VOTES` votes remaining, return "no consensus". + +Put the votes in ascending sorted order. If the number of votes N +is odd, take the center vote (the one at position (N+1)/2). If N is +even, take the lower of the two center votes (the one at position +N/2) if `BREAK_EVEN_LOW` is true. Otherwise, take the higher of the +two center votes (the one at position N/2 + 1). + +For example, the Median(…, even_low: True, type: "uint") of the votes +["String", 2, 111, 6] is 6. The Median(…, even_low: True, type: "uint") +of the votes ["String", 77, 9, 22, "String", 3] is 9. + + <a id='S3.3.4.2'></a> + +#### Mode + +_Parameters_: `MIN_COUNT` (an integer), `BREAK_TIES_LOW` (a boolean), +`TYPE` (a SimpleType) + + ; Encoding: + ModeOp = { op: "Mode", + ? min_count: IntOpArgument, ; Default 1. + ? tie_low: bool, ; Default true. + type: SimpleType + } + +Discard all votes that are not of the specified `TYPE`. Of the +remaining votes, look for the value that has received the most +votes. If no value has received at least `MIN_COUNT` votes, then +return "no consensus". + +If there is a single value that has received the most votes, return +it. Break ties in favor of lower values if `BREAK_TIES_LOW` is true, +and in favor of higher values if `BREAK_TIES_LOW` is false. +(Perform comparisons in canonical cbor order.) + + <a id='S3.3.4.3'></a> + +#### Threshold + +_Parameters_: `MIN_COUNT` (an integer), `BREAK_MULTI_LOW` (a boolean), +`TYPE` (a SimpleType) + + ; Encoding + ThresholdOp = { op: "Threshold", + min_count: IntOpArgument, ; No default. + ? multi_low: bool, ; Default true. + type: SimpleType + } + +Discard all votes that are not of the specified `TYPE`. Sort in +canonical cbor order. If `BREAK_MULTI_LOW` is false, reverse the +order of the list. + +Return the first element that received at least `MIN_COUNT` votes. +If no value has received at least `MIN_COUNT` votes, then return +"no consensus". + + <a id='S3.3.4.4'></a> + +#### BitThreshold + +Parameters: `MIN_COUNT` (an integer >= 1) + + ; Encoding + BitThresholdOp = { op: "BitThreshold", + min_count: IntOpArgument, ; No default. + } + +These are usually not needed, but are quite useful for +building some ProtoVer operations. + +Discard all votes that are not of type uint or bstr; construe bstr +inputs as having type "biguint". + +The output is a uint or biguint in which the b'th bit is set iff the +b'th bit is set in at least `MIN_COUNT` of the votes. + + <a id='S3.3.5'></a> + +### Voting operations for lists + +These operations work on lists of SimpleVal: + + ; List type definitions + ListVal = [ * SimpleVal ] + + ListType = [ "list", + [ *SimpleType ] / nil ] + +They are encoded as: + + ; Only one list operation exists right now. + ListOp = SetJoinOp + + <a id='S3.3.5.1'></a> + +#### SetJoin + +Parameters: `MIN_COUNT` (an integer >= 1). +Optional parameters: `TYPE` (a SimpleType.) + + ; Encoding: + SetJoinOp = { + op: "SetJoin", + min_count: IntOpArgument, + ? type: SimpleType + } + +Discard all votes that are not lists. From each vote, +discard all members that are not of type 'TYPE'. + +For the consensus, construct a new list containing exactly those +elements that appears in at least `MIN_COUNT` votes. + +(Note that the input votes may contain duplicate elements. These +must be treated as if there were no duplicates: the vote +[1, 1, 1, 1] is the same as the vote [1]. Implementations may want +to preprocess votes by discarding all but one instance of each +member.) + + <a id='S3.3.6'></a> + +### Voting operations for maps + +Map voting operations work over maps from key types to other non-map +types. + + ; Map type definitions. + MapVal = { * SimpleVal => ItemVal } + ItemVal = ListVal / SimpleVal + + MapType = [ "map", [ *SimpleType ] / nil, [ *ItemType ] / nil ] + ItemType = ListType / SimpleType + +They are encoded as: + + ; MapOp encodings + MapOp = MapJoinOp / StructJoinOp + + <a id='S3.3.6.1'></a> + +#### MapJoin + +The MapJoin operation combines homogeneous maps (that is, maps from +a single key type to a single value type.) + +Parameters: + `KEY_MIN_COUNT` (an integer >= 1) + `KEY_TYPE` (a SimpleType type) + `ITEM_OP` (A non-MapJoin voting operation) + +Encoding: + + ; MapJoin operation encoding + MapJoinOp = { + op: "MapJoin" + ? key_min_count: IntOpArgument, ; Default 1. + key_type: SimpleType, + item_op: ListOp / SimpleOp + } + +First, discard all votes that are not maps. Then consider the set +of keys from each vote as if they were a list, and apply +`SetJoin[KEY_MIN_COUNT,KEY_TYPE]` to those lists. The resulting list +is a set of keys to consider including in the output map. + +> We have a separate `key_min_count` field, even if `item_op` has +> its own `min_count` field, because some min_count values (like +> `qfield`) depend on the overall number of votes for the field. +> Having `key_min_count` lets us specify rules like "the FOO of all +> votes on this field, if there are at least 2 such votes." + +For each key in the output list, run the sub-voting operation +`ItemOperation` on the values it received in the votes. Discard all +keys for which the outcome was "no consensus". + +The final vote result is a map from the remaining keys to the values +produced by the voting operation. + + <a id='S3.3.6.2'></a> + +#### StructJoin + +A StructJoinOp operation describes a way to vote on maps that encode a +structure-like object. + +Parameters: + `KEY_RULES` (a map from int or string to StructItemOp) + `UNKNOWN_RULE` (An operation to apply to unrecognized keys.) + + ; Encoding + StructItemOp = ListOp / SimpleOp / MapJoinOp / DerivedItemOp / + CborDerivedItemOp + + VoteableStructKey = int / tstr + + StructJoinOp = { + op: "StructJoin", + key_rules: { + * VoteableStructKey => StructItemOp, + } + ? unknown_rule: StructItemOp + } + +To apply a StructJoinOp to a set of votes, first discard every vote that is +not a map. Then consider the set of keys from all the votes as a single +list, with duplicates removed. Also remove all entries that are not integers +or strings from the list of keys. + +For each key, then look for that key in the `KEY_RULES` map. If there is an +entry, then apply the StructItemOp for that entry to the values for that key +in every vote. Otherwise, apply the `UNKNOWN_RULE` operation to the values +for that key in every vote. Otherwise, there is no consensus for the values +of this key. If there _is_ a consensus for the values, then the key should +map to that consensus in the result. + +This operation always reaches a consensus, even if it is an empty map. + + <a id='S3.3.6.3'></a> + +#### CborData + +A CborData operation wraps another operation, and tells the authorities +that after the operation is completed, its result should be decoded as a +CBOR bytestring and interpolated directly into the document. + +Parameters: `ITEM_OP` (Any SingleOp that can take a bstr input.) + + ; Encoding + CborSimpleOp = { + op: "CborSimple", + item-op: MedianOp / ModeOp / ThresholdOp / NoneOp + } + CborDerivedItemOp = { + op: "CborDerived", + item-op: DerivedItemOp, + } + +To apply either of these operations to a set of votes, first apply +`ITEM_OP` to those votes. After that's done, check whether the +consensus from that operation is a bstr that encodes a single item of +"well-formed" "valid" cbor. If it is not, this operation gives no +consensus. Otherwise, the consensus value for this operation is the +decoding of that bstr value. + + <a id='S3.3.6.4'></a> + +#### DerivedFromField + +This operation can only occur within a StructJoinOp operation (or a +semantically similar SectionRules). It indicates that one field +should have been derived from another. It can be used, for example, +to say that a relay's version is "derived from" a relay's descriptor +digest. + +Unlike other operations, this one depends on the entire consensus (as +computed so far), and on the entirety of the set of votes. + +> This operation might be a mistake, but we need it to continue lots of +> our current behavior. + +Parameters: + `FIELDS` (one or more other locations in the vote) + `RULE` (the rule used to combine values) + +Encoding + ; This item is "derived from" some other field. + DerivedItemOp = { + op: "DerivedFrom", + fields: [ +SourceField ], + rule: SimpleOp + } + + ; A field in the vote. + SourceField = [ FieldSource, VoteableStructKey ] + + ; A location in the vote. Each location here can only + ; be referenced from later locations, or from itself. + FieldSource = "M" ; Meta. + / "CP" ; ClientParam. + / "SP" ; ServerParam. + / "RM" ; Relay-meta + / "RS" ; Relay-SNIP + / "RL" ; Relay-legacy + +To compute a consensus with this operation, first locate each field described +in the SourceField entry in each VoteDocument (if present), and in the +consensus computed so far. If there is no such field in the +consensus or if it has not been computed yet, then +this operation produces "no consensus". Otherwise, discard the VoteDocuments +that do not have the same value for the field as the consensus, and their +corresponding votes for this field. Do this for every listed field. + +At this point, we have a set of votes for this field's value that all come +from VoteDocuments that describe the same value for the source field(s). Apply +the `RULE` operation to those votes in order to give the result for this +voting operation. + +The DerivedFromField members in a SectionRules or a StructJoinOp +should be computed _after_ the other members, so that they can refer +to those members themselves. + + <a id='S3.3.7'></a> + +### Voting on document sections + +Voting on a section of the document is similar to the StructJoin +operation, with some exceptions. When we vote on a section of the +document, we do *not* apply a single voting rule immediately. +Instead, we first "_merge_" a set of SectionRules together, and then +apply the merged rule to the votes. This is the only place where we +merge rules like this. + +A SectionRules is _not_ a voting operation, so its format is not +tagged with an "op": + + ; Format for section rules. + SectionRules = { + * VoteableStructKey => SectionItemOp, + ? nil => SectionItemOp + } + SectionItemOp = StructJoinOp / StructItemOp + +To merge a set of SectionRules together, proceed as follows. For each +key, consider whether at least QUORUM_AUTH authorities have voted the +same StructItemOp for that key. If so, that StructItemOp is the +resulting operation for this key. Otherwise, there is no entry for this key. + +Do the same for the "nil" StructItemOp; use the result as the +`UNKNOWN_RULE`. + +Note that this merging operation is *not* recursive. + + <a id='S3.4'></a> + +## A CBOR-based metaformat for votes. + +A vote is a signed document containing a number of sections; each +section corresponds roughly to a section of another document, a +description of how the vote is to be conducted, or both. + + ; VoteDocument is a top-level signed vote. + VoteDocument = [ + ; Each signature may be produced by a different key, if they + ; are all held by the same authority. + sig: [ + SingleSig ], + lifetime: Lifespan, + digest-alg: DigestAlgorithm, + body: bstr .cbor VoteContent + ] + + VoteContent = { + ; List of supported consensus methods. + consensus-methods: [ + uint ], + + ; Text-based legacy vote to be used if the negotiated + ; consensus method is too old. It should itself be signed. + ; It's encoded as a series of text chunks, to help with + ; cbor-based binary diffs. + ? legacy-vote: [ * tstr ], + + ; How should the votes within the individual sections be + ; computed? + voting-rules: VotingRules, + + ; Information that the authority wants to share about this + ; vote, which is not itself voted upon. + notes: NoteSection, + + ; Meta-information that the authorities vote on, which does + ; not actually appear in the ENDIVE or consensus directory. + meta: MetaSection .within VoteableSection, + + ; Fields that appear in the client network parameter document. + client-params: ParamSection .within VoteableSection, + ; Fields that appear in the server network parameter document. + server-params: ParamSection .within VoteableSection, + + ; Information about each relay. + relays: RelaySection, + + ; Information about indices. + indices: IndexSection, + + * tstr => any + } + + ; Self-description of a voter. + VoterSection = { + ; human-memorable name + name: tstr, + + ; List of link specifiers to use when uploading to this + ; authority. (See proposal for dirport link specifier) + ? ul: [ *LinkSpecifier ], + + ; List of link specifiers to use when downloading from this authority. + ? dl: [ *LinkSpecifier ], + + ; contact information for this authority. + ? contact: tstr, + + ; legacy certificate in format given by dir-spec.txt. + ? legacy-cert: tstr, + + ; for extensions + * tstr => any, + } + + ; An indexsection says how we think routing indices should be built. + IndexSection = { + * IndexId => bstr .cbor [ IndexGroupId, GenericIndexRule ], + } + IndexGroupId = uint + ; A mechanism for building a single routing index. Actual values need to + ; be within RecognizedIndexRule or the authority can't complete the + ; consensus. + GenericIndexRule = { + type: tstr, + * tstr => any + } + RecognizedIndexRule = EdIndex / RSAIndex / BWIndex / WeightedIndex + ; The values in an RSAIndex are derived from digests of Ed25519 keys. + EdIndex = { + type: "ed-id", + alg: DigestAlgorithm, + prefix: bstr, + suffix: bstr + } + ; The values in an RSAIndex are derived from RSA keys. + RSAIndex = { + type: "rsa-id" + } + ; A BWIndex is built by taking some uint-valued field referred to by + ; SourceField from all the relays that have all of required_flags set. + BWIndex = { + type: "bw", + bwfield: SourceField, + require_flags: FlagSet, + } + ; A flag can be prefixed with "!" to indicate negation. A flag + ; with a name like P@X indicates support for port class 'X' in its + ; exit policy. + ; + ; FUTURE WORK: perhaps we should add more structure here and it + ; should be a matching pattern? + FlagSet = [ *tstr ] + ; A WeightedIndex applies a set of weights to a BWIndex based on which + ; flags the various routers have. Relays that match a set of flags have + ; their weights multiplied by the corresponding WeightVal. + WeightedIndex = { + type: "weighted", + source: BwIndex, + weight: { * FlagSet => WeightVal } + } + ; A WeightVal is either an integer to multiply bandwidths by, or a + ; string from the Wgg, Weg, Wbm, ... set as documented in dir-spec.txt, + ; or a reference to an earlier field. + WeightVal = uint / tstr / SourceField + VoteableValue = MapVal / ListVal / SimpleVal + + ; A "VoteableSection" is something that we apply part of the + ; voting rules to. When we apply voting rules to these sections, + ; we do so without regards to their semantics. When we are done, + ; we use these consensus values to make the final consensus. + VoteableSection = { + VoteableStructKey => VoteableValue, + } + + ; A NoteSection is used to convey information about the voter and + ; its vote that is not actually voted on. + NoteSection = { + ; Information about the voter itself + voter: VoterSection, + ; Information that the voter used when assigning flags. + ? flag-thresholds: { tstr => any }, + ; Headers from the bandwidth file to be reported as part of + ; the vote. + ? bw-file-headers: {tstr => any }, + ? shared-rand-commit: SRCommit, + * VoteableStructKey => VoteableValue, + } + + ; Shared random commitment; fields are as for the current + ; shared-random-commit fields. + SRCommit = { + ver: uint, + alg: DigestAlgorithm, + ident: bstr, + commit: bstr, + ? reveal: bstr + } + + ; the meta-section is voted on, but does not appear in the ENDIVE. + MetaSection = { + ; Seconds to allocate for voting and distributing signatures + ; Analagous to the "voting-delay" field in the legacy algorithm. + voting-delay: [ vote_seconds: uint, dist_seconds: uint ], + ; Proposed time till next vote. + voting-interval: uint, + ; proposed lifetime for the SNIPs and ENDIVEs + snip-lifetime: Lifespan, + ; proposed lifetime for client params document + c-param-lifetime: Lifespan, + ; proposed lifetime for server params document + s-param-lifetime: Lifespan, + ; signature depth for ENDIVE + signature-depth: uint, + ; digest algorithm to use with ENDIVE. + signature-digest-alg: DigestAlgorithm, + ; Current and previous shared-random values + ? cur-shared-rand: [ reveals: uint, rand: bstr ], + ? prev-shared-rand: [ reveals: uint, rand: bstr ], + ; extensions. + * VoteableStructKey => VoteableValue, + }; + + ; A ParamSection will be made into a ParamDoc after voting; + ; the fields are analogous. + ParamSection = { + ? certs: [ 1*2 bstr .cbor VoterCert ], + ? recommend-versions: [ * tstr ], + ? require-protos: ProtoVersions, + ? recommend-protos: ProtoVersions, + ? params: NetParams, + * VoteableStructKey => VoteableValue, + } + RelaySection = { + ; Mapping from relay identity key (or digest) to relay information. + * bstr => RelayInfo, + } + + ; A RelayInfo is a vote about a single relay. + RelayInfo = { + meta: RelayMetaInfo .within VoteableSection, + snip: RelaySNIPInfo .within VoteableSection, + legacy: RelayLegacyInfo .within VoteableSection, + } + + ; Information about a relay that doesn't go into a SNIP. + RelayMetaInfo = { + ; Tuple of published-time and descriptor digest. + ? desc: [ uint , bstr ], + ; What flags are assigned to this relay? We use a + ; string->value encoding here so that only the authorities + ; who have an opinion on the status of a flag for a relay need + ; to vote yes or no on it. + ? flags: { *tstr=>bool }, + ; The relay's self-declared bandwidth. + ? bw: uint, + ; The relay's measured bandwidth. + ? mbw: uint, + ; The fingerprint of the relay's RSA identity key. + ? rsa-id: RSAIdentityFingerprint + } + ; SNIP information can just be voted on directly; the formats + ; are the same. + RelaySNIPInfo = SNIPRouterData + + ; Legacy information is used to build legacy consensuses, but + ; not actually required by walking onions clients. + RelayLegacyInfo = { + ; Mapping from consensus version to microdescriptor digests + ; and microdescriptors. + ? mds: [ *Microdesc ], + } + + ; Microdescriptor votes now include the digest AND the + ; microdescriptor-- see note. + Microdesc = [ + low: uint, + high: uint, + digest: bstr .size 32, + ; This is encoded in this way so that cbor-based diff tools + ; can see inside it. Because of compression and diffs, + ; including microdesc text verbatim should be comparatively cheap. + content: encoded-cbor .cbor [ *tstr ], + ] + + ; ========== + + ; The VotingRules field explains how to vote on the members of + ; each section + VotingRules = { + meta: SectionRules, + params: SectionRules, + relay: RelayRules, + indices: SectionRules, + } + + ; The RelayRules object explains the rules that apply to each + ; part of a RelayInfo. A key will appear in the consensus if it + ; has been listed by at least key_min_count authorities. + RelayRules = { + key_min_count: IntOpArgument, + meta: SectionRules, + snip: SectionRules, + legacy: SectionRules, + } + + <a id='S3.5'></a> + +## Computing a consensus. + +To compute a consensus, the authorities first verify that all the votes are +timely and correctly signed by real authorities. This includes +validating all invariants stated here, and all internal documents. + +If they have two votes from an authority, authorities SHOULD issue a +warning, and they should take the one that is published more +recently. + +> TODO: Teor suggests that maybe we shouldn't warn about two votes +> from an authority for the same period, and we could instead have a +> more resilient process here, where authorities can update their +> votes at various times over the voting period, up to some point. +> +> I'm not sure whether this helps reliability more or less than it risks it, +> but it worth investigating. + +Next, the authorities determine the consensus method as they do today, +using the field "consensus-method". This can also be expressed as +the voting operation `Threshold[SUPERQUORUM_PRESENT, false, uint]`. + +If there is no consensus for the consensus-method, then voting stops +without having produced a consensus. + +Note that in contrast with its behavior in the current voting algorithm, the +consensus method does not determine the way to vote on every +individual field: that aspect of voting is controlled by the +voting-rules. Instead, the consensus-method changes other aspects +of this voting, such as: + + * Adding, removing, or changing the semantics of voting + operations. + * Changing the set of documents to which voting operations apply. + * Otherwise changing the rules that are set out in this + document. + +Once a consensus-method is decided, the next step is to compute the +consensus for other sections in this order: `meta`, `client-params`, +`server-params`, and `indices`. The consensus for each is calculated +according to the operations given in the corresponding section of +VotingRules. + +Next the authorities compute a consensus on the `relays` section, +which is done slightly differently, according to the rules of +RelayRules element of VotingRules. + +Finally, the authorities transform the resulting sections into an +ENDIVE and a legacy consensus, as in "Computing an ENDIVE" and +"Computing a legacy consensus" below. + +To vote on a single VotingSection, find the corresponding +SectionRules objects in the VotingRules of this votes, and apply it +as described above in "Voting on document sections". + + <a id='S3.6'></a> + +## If an older consensus method is negotiated (Transitional) + +The `legacy-vote` field in the vote document contains an older (v3, +text-style) consensus vote, and is used when an older consensus +method is negotiated. The legacy-vote is encoded by splitting it +into pieces, to help with CBOR diff calculation. Authorities MAY split at +line boundaries, space boundaries, or anywhere that will help with +diffs. To reconstruct the legacy vote, concatenate the members of +`legacy-vote` in order. The resulting string MUST validate +according to the rules of the legacy voting algorithm. + +If a legacy vote is present, then authorities SHOULD include the +same view of the network in the legacy vote as they included in their +real vote. + +If a legacy vote is present, then authorities MUST +give the same list of consensus-methods and the same voting +schedule in both votes. Authorities MUST reject noncompliant votes. + + <a id='S3.7'></a> + +## Computing an ENDIVE. + +If a consensus-method is negotiated that is high enough to support +ENDIVEs, then the authorities proceed as follows to transform the consensus +sectoins above into an ENDIVE. + +The ParamSections from the consensus are used verbatim as the bodies of the +`client-params` and `relay-params` fields. + +The fields that appear in each RelaySNIPInfo determine what goes +into the SNIPRouterData for each relay. To build the relay section, +first decide which relays appear according to the `key_min_count` +field in the RelayRules. Then collate relays across all the votes +by their keys, and see which ones are listed. For each key that +appears in at least `key_min_count` votes, apply the RelayRules to +each section of the RelayInfos for that key. + +The sig_params section is derived from fields in the meta section. +Fields with identical names are simply copied; Lifespan values are +copied to the corresponding documents (snip-lifetime as the lifespan +for SNIPs and ENDIVEs, and c and s-param-lifetime as the lifespan +for ParamDocs). + +To compute the signature nonce, use the signature digest algorithm +to compute the digest of each input vote body, sort those digests +lexicographically, and concatenate and hash those digests again. + +Routing indices are built according to named IndexRules, and grouped +according to fields in the meta section. See "Constructing Indices" below. + +> (At this point extra fields may be copied from the Meta section of +> each RelayInfo into the ENDIVERouterData depending on the meta +> document; we do not, however, currently specify any case where this +> is done.) + + <a id='S3.7.1'></a> + +### Constructing indices + +After having built the list of relays, the authorities construct and +encode the indices that appear in the ENDIVEs. The voted-upon +GenericIndexRule values in the IndexSection of the consensus say how +to build the indices in the ENDIVE, as follows. + +An `EdIndex` is built using the IndexType_Ed25519Id value, with the +provided prefix and suffix values. Authorities don't need to expand +this index in the ENDIVE, since the relays can compute it +deterministically. + +An `RSAIndex` is built using the IndexType_RSAId type. Authorities +don't need to expand this index in the ENDIVE, since the relays can +compute it deterministically. + +A `BwIndex` is built using the IndexType_Weighted type. Each relay has a +weight equal to some specified bandwidth field in its consensus +RelayInfo. If a relay is missing any of the `required_flags` in +its meta section, or if it does not have the specified bandwidth +field, that relay's weight becomes 0. + +A `WeightedIndex` is built by computing a BwIndex, and then +transforming each relay in the list according to the flags that it +has set. Relays that match any set of flags in the WeightedIndex +rule get their bandwidths multiplied by _all_ WeightVals that +apply. Some WeightVals are computed according to special rules, +such as "Wgg", "Weg", and so on. These are taken from the current +dir-spec.txt. + +For both BwIndex and WeightedIndex values, authorities MUST scale +the computed outputs so that no value is greater than UINT32_MAX; +they MUST do by shifting all values right by lowest number of bits +that achieves this. + +> We could specify a more precise algorithm, but this is simpler. + +Indices with the same IndexGroupId are placed in the same index +group; index groups are ordered numerically. + + <a id='S3.8'></a> + +## Computing a legacy consensus. + +When using a consensus method that supports Walking Onions, the +legacy consensus is computed from the same data as the ENDIVE. +Because the legacy consensus format will be frozen once Walking +Onions is finalized, we specify this transformation directly, rather +than in a more extensible way. + +The published time and descriptor digest are used directly. +Microdescriptor negotiation proceeds as before. Bandwidths, +measured bandwidths, descriptor digests, published times, flags, and +rsa-id values are taken from the RelayMetaInfo section. Addresses, +protovers, versions, and so on are taken from the RelaySNIPInfo. Header +fields are all taken from the corresponding header fields in the +MetaSection or the ClientParamsSection. All parameters are copied +into the net-params field. + + <a id='S3.9'></a> + +## Managing indices over time. + +> The present voting mechanism does not do a great job of handling +> the authorities + +The semantic meaning of most IndexId values, as understood by +clients should remain unchanging; if a client uses index 6 for +middle nodes, 6 should _always_ mean "middle nodes". + +If an IndexId is going to change its meaning over time, it should +_not_ be hardcoded by clients; it should instead be listed in the +NetParams document, as the exit indices are in the `port-classes` +field. (See also section 6 and appendix AH.) If such a field needs +to change, it also needs a migration method that allows clients with +older and newer parameters documents to exist at the same time. + + <a id='S4'></a> + +# Relay operations: Receiving and expanding ENDIVEs + +Previously, we introduced a format for ENDIVEs to be transmitted +from authorities to relays. To save on bandwidth, the relays +download diffs rather than entire ENDIVEs. The ENDIVE format makes +several choices in order to make these diffs small: the Merkle tree +is omitted, and routing indices are not included directly. + +To address those issues, this document describes the steps that a +relay needs to perform, upon receiving an ENDIVE document, to derive +all the SNIPs for that ENDIVE. + +Here are the steps to be followed. We'll describe them in order, +though in practice they could be pipelined somewhat. We'll expand +further on each step later on. + + 1. Compute routing indices positions. + + 2. Compute truncated SNIPRouterData variations. + + 3. Build signed SNIP data. + + 4. Compute Merkle tree. + + 5. Build authenticated SNIPs. + +Below we'll specify specific algorithms for these steps. Note that +relays do not need to follow the steps of these algorithms exactly, +but they MUST produce the same outputs as if they had followed them. + + <a id='S4.1'></a> + +## Computing index positions. + +For every IndexId in every Index Group, the relay will compute the +full routing index. Every routing index is a mapping from +index position ranges (represented as 2-tuples) to relays, where the +relays are represented as ENDIVERouterData members of the ENDIVE. The +routing index must map every possible value of the index to exactly one +relay. + +An IndexSpec field describes how the index is to be constructed. There +are four types of IndexSpec: Raw, Raw Spans, Weighted, RSAId, and +Ed25519Id. We'll describe how to build the indices for each. + +Every index may either have an integer key, or a binary-string +key. We define the "successor" of an integer index as the succeeding +integer. We define the "successor" of a binary string as the next +binary string of the same length in lexicographical (memcmp) order. We +define "predecessor" as the inverse of "successor". Both these +operations "wrap around" the index. + +The algorithms here describe a set of invariants that are +"verified". Relays SHOULD check each of these invariants; +authorities MUST NOT generate any ENDIVEs that violate them. If a +relay encounters an ENDIVE that cannot be verified, then the ENDIVE +cannot be expanded. + +> NOTE: conceivably should there be some way to define an index as a +> subset of another index, with elements weighted in different ways? In +> other words, "Index a is index b, except multiply these relays by 0 and +> these relays by 1.2". We can keep this idea sitting around in case there +> turns out to be a use for it. + + <a id='S4.1.1'></a> + +### Raw indices + +When the IndexType is Indextype_Raw, then its members are listed +directly in the IndexSpec. + + Algorithm: Expanding a "Raw" indexspec. + + Let result_idx = {} (an empty mapping). + + Let previous_pos = indexspec.first_index + + For each element [i, pos2] of indexspec.index_ranges: + + Verify that i is a valid index into the list of ENDIVERouterData. + + Set pos1 = the successor of previous_pos. + + Verify that pos1 and pos2 have the same type. + + Append the mapping (pos1, pos2) => i to result_idx + + Set previous_pos to pos2. + + Verify that previous_pos = the predecessor of indexspec.first_index. + + Return result_idx. + + <a id='S4.1.2'></a> + +### Raw numeric indices + +If the IndexType is Indextype_RawNumeric, it is described by a set of +spans on a 32-bit index range. + + Algorithm: Expanding a RawNumeric index. + + Let prev_pos = 0 + + For each element [i, span] of indexspec.index_ranges: + + Verify that i is a valid index into the list of ENDIVERouterData. + + Verify that prev_pos <= UINT32_MAX - span. + + Let pos2 = prev_pos + span. + + Append the mapping (pos1, pos2) => i to result_idx. + + Let prev_pos = successor(pos2) + + Verify that prev_pos = UINT32_MAX. + + Return result_idx. + + <a id='S4.1.3'></a> + +### Weighted indices + +If the IndexSpec type is Indextype_Weighted, then the index is +described by assigning a probability weight to each of a number of relays. +From these, we compute a series of 32-bit index positions. + +This algorithm uses 64-bit math, and 64-by-32-bit integer division. + +It requires that the sum of weights is no more than UINT32_MAX. + + Algorithm: Expanding a "Weighted" indexspec. + + Let total_weight = SUM(indexspec.index_weights) + + Verify total_weight <= UINT32_MAX. + + Let total_so_far = 0. + + Let result_idx = {} (an empty mapping). + + Define POS(b) = FLOOR( (b << 32) / total_weight). + + For 0 <= i < LEN(indexspec.indexweights): + + Let w = indexspec.indexweights[i]. + + Let lo = POS(total_so_far). + + Let total_so_far = total_so_far + w. + + Let hi = POS(total_so_far) - 1. + + Append (lo, hi) => i to result_idx. + + Verify that total_so_far = total_weight. + + Verify that the last value of "hi" was UINT32_MAX. + + Return result_idx. + +This algorithm is a bit finicky in its use of division, but it +results in a mapping onto 32 bit integers that completely covers the +space of available indices. + + <a id='S4.1.4'></a> + +### RSAId indices + +If the IndexSpec type is Indextype_RSAId then the index is a set of +binary strings describing the routers' legacy RSA identities, for +use in the HSv2 hash ring. + +These identities are truncated to a fixed length. Though the SNIP +format allows _variable_-length binary prefixes, we do not use this +feature. + + Algorithm: Expanding an "RSAId" indexspec. + + Let R = [ ] (an empty list). + + Take the value n_bytes from the IndexSpec. + + For 0 <= b_idx < MIN( LEN(indexspec.members) * 8, + LEN(list of ENDIVERouterData) ): + + Let b = the b_idx'th bit of indexspec.members. + + If b is 1: + Let m = the b_idx'th member of the ENDIVERouterData list. + + Verify that m has its RSAIdentityFingerprint set. + + Let pos = m.RSAIdentityFingerprint, truncated to n_bytes. + + Add (pos, b_idx) to the list R. + + Return INDEX_FROM_RING_KEYS(R). + + Sub-Algorithm: INDEX_FROM_RING_KEYS(R) + + First, sort R according to its 'pos' field. + + For each member (pos, idx) of the list R: + + If this is the first member of the list R: + Let key_low = pos for the last member of R. + else: + Let key_low = pos for the previous member of R. + + Let key_high = predecessor(pos) + + Add (key_low, key_high) => idx to result_idx. + + Return result_idx. + + <a id='S4.1.5'></a> + +### Ed25519 indices + +If the IndexSpec type is Indextype_Ed25519, then the index is a set of +binary strings describing the routers' positions in a hash ring, +derived from their Ed25519 identity keys. + +This algorithm is a generalization of the one used for hsv3 rings, +to be used to compute the hsv3 ring and other possible future +derivatives. + + Algorithm: Expanding an "Ed25519Id" indexspec. + + Let R = [ ] (an empty list). + + Take the values prefix, suffix, and n_bytes from the IndexSpec. + + Let H() be the digest algorithm specified by d_alg from the + IndexSpec. + + For 0 <= b_idx < MIN( LEN(indexspec.members) * 8, + LEN(list of ENDIVERouterData) ): + + Let b = the b_idx'th bit of indexspec.members. + + If b is 1: + Let m = the b_idx'th member of the ENDIVERouterData list. + + Let key = m's ed25519 identity key, as a 32-byte value. + + Compute pos = H(prefix || key || suffix) + + Truncate pos to n_bytes. + + Add (pos, b_idx) to the list R. + + Return INDEX_FROM_RING_KEYS(R). + + <a id='S4.1.6'></a> + +### Building a SNIPLocation + +After computing all the indices in an IndexGroup, relays combine +them into a series of SNIPLocation objects. Each SNIPLocation +MUST contain all the IndexId => IndexRange entries that point to a +given ENDIVERouterData, for the IndexIds listed in an IndexGroup. + + Algorithm: Build a list of SNIPLocation objects from a set of routing indices. + + Initialize R as [ { } ] * LEN(relays) (A list of empty maps) + + For each IndexId "ID" in the IndexGroup: + + Let router_idx be the index map calculated for ID. + (This is what we computed previously.) + + For each entry ( (LO, HI) => idx) in router_idx: + + Let R[idx][ID] = (LO, HI). + +SNIPLocation objects are thus organized in the order in which they will +appear in the Merkle tree: that is, sorted by the position of their +corresponding ENDIVERouterData. + +Because SNIPLocation objects are signed, they must be encoded as "canonical" +cbor, according to section 3.9 of RFC 7049. + +If R[idx] is {} (the empty map) for any given idx, then no SNIP will be +generated for the SNIPRouterData at that routing index for this index group. + + <a id='S4.2'></a> + +## Computing truncated SNIPRouterData. + +An index group can include an `omit_from_snips` field to indicate that +certain fields from a SNIPRouterData should not be included in the +SNIPs for that index group. + +Since a SNIPRouterData needs to be signed, this process has to be +deterministic. Thus, the truncated SNIPRouterData should be computed by +removing the keys and values for EXACTLY the keys listed and no more. The +remaining keys MUST be left in the same order that they appeared in the +original SNIPRouterData, and they MUST NOT be re-encoded. + +(Two keys are "the same" if and only if they are integers encoding the same +value, or text strings with the same UT-8 content.) + +There is no need to compute a SNIPRouterData when no SNIP is going to be +generated for a given router. + + <a id='S4.3'></a> + +## Building the Merkle tree. + +After computing a list of (SNIPLocation, SNIPRouterData) for every entry +in an index group, the relay needs to expand a Merkle tree to +authenticate every SNIP. + +There are two steps here: First the relay generates the leaves, and then +it generates the intermediate hashes. + +To generate the list of leaves for an index group, the relay first +removes all entries from the (SNIPLocation, SNIPRouterData) list that +have an empty index map. The relay then puts `n_padding_entries` "nil" +entries at the end of the list. + +To generate the list of leaves for the whole Merkle tree, the relay +concatenates these index group lists in the order in which they appear +in the ENDIVE, and pads the resulting list with "nil" entries until the +length of the list is a power of two: 2^`tree-depth` for some integer +`tree-depth`. Let LEAF(IDX) denote the entry at position IDX in this +list, where IDX is a D-bit bitstring. LEAF(IDX) is either a byte string +or nil. + +The relay then recursively computes the hashes in the Merkle tree as +follows. (Recall that `H_node()` and `H_leaf()` are hashes taking +a bit-string PATH, a LIFESPAN and NONCE from the signature information, +and a variable-length string ITEM.) + + Recursive defintion: HM(PATH) + + Given PATH a bitstring of length no more than tree-depth. + + Define S: + S(nil) = an all-0 string of the same length as the hash output. + S(x) = x, for all other x. + + If LEN(PATH) = tree-depth: (Leaf case.) + If LEAF(PATH) = nil: + HM(PATH) = nil. + Else: + HM(PATH) = H_node(PATH, LIFESPAN, NONCE, LEAF(PATH)). + + Else: + Let LEFT = HM(PATH || 0) + Let RIGHT = HM(PATH || 1) + If LEFT = nil and RIGHT = nil: + HM(PATH) = nil + else: + HM(PATH) = H_node(PATH, LIFESPAN, NONCE, S(LEFT) || S(RIGHT)) + +Note that entries aren't computed for "nil" leaves, or any node all of +whose children are "nil". The "nil" entries only exist to place all +leaves at a constant depth, and to enable spacing out different sections +of the tree. + +If `signature-depth` for the ENDIVE is N, the relay does not need to +compute any Merkle tree entries for PATHs of length shorter than N bits. + + <a id='S4.4'></a> + +## Assembling the SNIPs + +Finally, the relay has computed a list of encoded (SNIPLocation, +RouterData) values, and a Merkle tree to authenticate them. At this +point, the relay builds them into SNIPs, using the `sig_params` and +`signatures` from the ENDIVE. + + Algorithm: Building a SNIPSignature for a SNIP. + + Given a non-nil (SNIPLocation, RouterData) at leaf position PATH. + + Let SIG_IDX = PATH, truncated to signature-depth bits. + Consider SIG_IDX as an integer. + + Let Sig = signatures[SIG_IDX] -- either the SingleSig or the MultiSig + for this snip. + + Let HashPath = [] (an empty list). + For bitlen = signature-depth+1 ... tree-depth-1: + Let X = PATH, truncated to bitlen bits. + Invert the final bit of PATH. + Append HM(PATH) to HashPath. + + The SnipSignature's signature values is Sig, and its merkle_path is + HashPath. + + <a id='S4.5'></a> + +## Implementation considerations + +A relay only needs to hold one set of SNIPs at a time: once one +ENDIVE's SNIPs have been extracted, then the SNIPs from the previous +ENDIVE can be discarded. + +To save memory, a relay MAY store SNIPs to disk, and mmap them as +needed. + + <a id='S5'></a> + +# Extending circuits with Walking Onions + +When a client wants to extend a circuit, there are several +possibilities. It might need to extend to an unknown relay with +specific properties. It might need to extend to a particular relay +from which it has received a SNIP before. In both cases, there are +changes to be made in the circuit extension process. + +Further, there are changes we need to make for the handshake between +the extending relay and the target relay. The target relay is no +longer told by the client which of its onion keys it should use... so +the extending relay needs to tell the target relay which keys are in +the SNIP that the client is using. + + <a id='S5.1'></a> + +## Modifying the EXTEND/CREATE handshake + +First, we will require that proposal 249 (or some similar proposal +for wide CREATE and EXTEND cells) is in place, so that we can have +EXTEND cells larger than can fit in a single cell. (See +319-wide-everything.md for an example proposal to supersede 249.) + +We add new fields to the CREATE2 cell so that relays can send each +other more information without interfering with the client's part of +the handshake. + +The CREATE2, CREATED2, and EXTENDED2 cells change as follows: + + struct create2_body { + // old fields + u16 htype; // client handshake type + u16 hlen; // client handshake length + u8 hdata[hlen]; // client handshake data. + + // new fields + u8 n_extensions; + struct extension extension[n_extensions]; + } + + struct created2_body { + // old fields + u16 hlen; + u8 hdata[hlen]; + + // new fields + u8 n_extensions; + struct extension extension[n_extensions]; + } + + struct truncated_body { + // old fields + u8 errcode; + + // new fields + u8 n_extensions; + struct extension extension[n_extensions]; + } + + // EXTENDED2 cells can now use the same new fields as in the + // created2 cell. + + struct extension { + u16 type; + u16 len; + u8 body[len]; + } + +These extensions are defined by this proposal: + + [01] -- `Partial_SNIPRouterData` -- Sent from an extending relay + to a target relay. This extension holds one or more fields + from the SNIPRouterData that the extending relay is using, + so that the target relay knows (for example) what keys to + use. (These fields are determined by the + "forward_with_extend" field in the ENDIVE.) + + [02] -- Full_SNIP -- an entire SNIP that was used in an attempt to + extend the circuit. This must match the client's provided + index position. + + [03] -- Extra_SNIP -- an entire SNIP that was not used to extend + the circuit, but which the client requested anyway. This + can be sent back from the extending relay when the client + specifies multiple index positions, or uses a nonzero "nth" value + in their `snip_index_pos` link specifier. + + [04] -- SNIP_Request -- a 32-bit index position, or a single zero + byte, sent away from the client. If the byte is 0, the + originator does not want a SNIP. Otherwise, the + originator does want a SNIP containing the router and the + specified index. Other values are unspecified. + +By default, EXTENDED2 cells are sent with a SNIP iff the EXTENDED2 +cell used a `snip_index_pos` link specifier, and CREATED2 cells are +not sent with a SNIP. + + <a id='S5.1.1'></a> + +### New link specifiers + +We add a new link specifier type for a router index, using the +following coding for its contents: + + /* Using trunnel syntax here. */ + struct snip_index_pos { + u32 index_id; // which index is it? + u8 nth; // how many SNIPs should be skipped/included? + u8 index_pos[]; // extends to the end of the link specifier. + } + +The `index_pos` field can be longer or shorter than the actual width of +the router index. If it is too long, it is truncated. If it is too +short, it is extended with zero-valued bytes. + +Any number of these link specifiers may appear in an EXTEND cell. +If there is more then one, then they should appear in order of +client preference; the extending relay may extend to any of the +listed routers. + +This link specifier SHOULD NOT be used along with IPv4, IPv6, RSA +ID, or Ed25519 ID link specifiers. Relays receiving such a link +specifier along with a `snip_index_pos` link specifier SHOULD reject +the entire EXTEND request. + +If `nth` is nonzero, then link specifier means "the n'th SNIP after +the one defined by the SNIP index position." A relay MAY reject +this request if `nth` is greater than 4. If the relay does not +reject this request, then it MUST include all snips between +`index_pos` and the one that was actually used in an Extra_Snip +extension. (Otherwise, the client would not be able to verify that +it had gotten the correct SNIP.) + +> I've avoided use of CBOR for these types, under the assumption that we'd +> like to use CBOR for directory stuff, but no more. We already have +> trunnel-like objects for this purpose. + + <a id='S5.2'></a> + +## Modified ntor handshake + +We adapt the ntor handshake from tor-spec.txt for this use, with the +following main changes. + + * The NODEID and KEYID fields are omitted from the input. + Instead, these fields _may_ appear in a PartialSNIPData extension. + + * The NODEID and KEYID fields appear in the reply. + + * The NODEID field is extended to 32 bytes, and now holds the + relay's ed25519 identity. + +So the client's message is now: + + CLIENT_PK [32 bytes] + +And the relay's reply is now: + + NODEID [32 bytes] + KEYID [32 bytes] + SERVER_PK [32 bytes] + AUTH [32 bytes] + +otherwise, all fields are computed as described in tor-spec. + +When this handshake is in use, the hash function is SHA3-256 and keys +are derived using SHAKE-256, as in rend-spec-v3.txt. + +> Future work: We may wish to update this choice of functions +> between now and the implementation date, since SHA3 is a bit +> pricey. Perhaps one of the BLAKEs would be a better choice. If +> so, we should use it more generally. On the other hand, the +> presence of public-key operations in the handshake _probably_ +> outweighs the use of SHA3. + +We will have to give this version of the handshake a new handshake +type. + + <a id='S5.3'></a> + +## New relay behavior on EXTEND and CREATE failure. + +If an EXTEND2 cell based on an routing index fails, the relay should +not close the circuit, but should instead send back a TRUNCATED cell +containing the SNIP in an extension. + +If a CREATE2 cell fails and a SNIP was requested, then instead of +sending a DESTROY cell, the relay SHOULD respond with a CREATED2 +cell containing 0 bytes of handshake data, and the SNIP in an +extension. Clients MAY re-extend or close the circuit, but should +not leave it dangling. + + <a id='S5.4'></a> + +## NIL handshake type + +We introduce a new handshake type, "NIL". The NIL handshake always +fails. A client's part of the NIL handshake is an empty bytestring; +there is no server response that indicates success. + +The NIL handshake can used by the client when it wants to fetch a +SNIP without creating a circuit. + +Upon receiving a request to extend with the NIL circuit type, a +relay SHOULD NOT actually open any connection or send any data to +the target relay. Instead, it should respond with a TRUNCATED cell +with the SNIP(s) that the client requested in one or more Extra_SNIP +extensions. + + <a id='S5.5'></a> + +## Padding handshake cells to a uniform size + +To avoid leaking information, all CREATE/CREATED/EXTEND/EXTENDED +cells SHOULD be padded to the same sizes. In all cases, the amount +of padding is controlled by a set of network parameters: +"create-pad-len", "created-pad-len", "extend-pad-len" and +"extended-pad-len". These parameters determine the minimum length +that the cell body or relay cell bodies should be. + +If a cell would be sent whose body is less than the corresponding +parameter value, then the sender SHOULD pad the body by adding +zero-valued bytes to the cell body. As usual, receivers MUST ignore +extra bytes at the end of cells. + +> ALTERNATIVE: We could specify a more complicated padding +> mechanism, eg. 32 bytes of zeros then random bytes. + + + <a id='S6'></a> + +# Client behavior with walking onions + +Today's Tor clients have several behaviors that become somewhat +more difficult to implement with Walking Onions. Some of these +behaviors are essential and achievable. Others can be achieved with +some effort, and still others appear to be incompatible with the +Walking Onions design. + + <a id='S6.1'></a> + +## Bootstrapping and guard selection + +When a client first starts running, it has no guards on the Tor +network, and therefore can't start building circuits immediately. +To produce a list of possible guards, the client begins connecting +to one or more fallback directories on their ORPorts, and building +circuits through them. These are 3-hop circuits. The first hop of +each circuit is the fallback directory; the second and third hops +are chosen from the Middle routing index. At the third hop, the +client then sends an informational request for a guard's SNIP. This +informational request is an EXTEND2 cell with handshake type NIL, +using a random spot on the Guard routing index. + +Each such request yields a single SNIP that the client will store. +These SNIPs, in the order in which they were _requested_, will form the +client's list of "Sampled" guards as described in guard-spec.txt. + +Clients SHOULD ensure that their sampled guards are not +linkable to one another. In particular, clients SHOULD NOT add more +than one guard retrieved from the same third hop on the same +circuit. (If it did, that third hop would realize that some client using +guard A was also using guard B.) + +> Future work: Is this threat real? It seems to me that knowing one or two +> guards at a time in this way is not a big deal, though knowing the whole +> set would sure be bad. However, we shouldn't optimize this kind of +> defense away until we know that it's actually needless. + +If a client's network connection or choice of entry nodes is heavily +restricted, the client MAY request more than one guard at a time, but if +it does so, it SHOULD discard all but one guard retrieved from each set. + +After choosing guards, clients will continue to use them even after +their SNIPs expire. On the first circuit through each guard after +opening a channel, clients should ask that guard for a fresh SNIP for +itself, to ensure that the guard is still listed in the consensus, and +to keep the client's information up-to-date. + + <a id='S6.2'></a> + +## Using bridges + +As now, clients are configured to use a bridge by using an address and a +public key for the bridge. Bridges behave like guards, except that they +are not listed in any directory or ENDIVE, and so cannot prove +membership when the client connects to them. + +On the first circuit through each channel to a bridge, the client +asks that bridge for a SNIP listing itself in the `Self` routing +index. The bridge responds with a self-created unsigned SNIP: + + ; This is only valid when received on an authenticated connection + ; to a bridge. + UnsignedSNIP = [ + ; There is no signature on this SNIP. + auth : nil, + + ; Next comes the location of the SNIP within the ENDIVE. This + ; SNIPLocation will list only the Self index. + index : bstr .cbor SNIPLocation, + + ; Finally comes the information about the router. + router : bstr .cbor SNIPRouterData, + ] + +*Security note*: Clients MUST take care to keep UnsignedSNIPs separated +from signed ones. These are not part of any ENDIVE, and so should not be +used for any purpose other than connecting through the bridge that the +client has received them from. They should be kept associated with that +bridge, and not used for any other, even if they contain other link +specifiers or keys. The client MAY use link specifiers from the +UnsignedSNIP on future attempts to connect to the bridge. + + <a id='S6.3'></a> + +## Finding relays by exit policy + +To find a relay by exit policy, clients might choose the exit +routing index corresponding to the exit port they want to use. This +has negative privacy implications, however, since the middle node +discovers what kind of exit traffic the client wants to use. +Instead, we support two other options. + +First, clients may build anonymous three-hop circuits and then use those +circuits to request the SNIPs that they will use for their exits. This +may, however, be inefficient. + +Second, clients may build anonymous three-hop circuits and then use a +BEGIN cell to try to open the connection when they want. When they do +so, they may include a new flag in the begin cell, "DVS" to enable +Delegated Verifiable Selection. As described in the Walking Onions +paper, DVS allows a relay that doesn't support the requested port to +instead send the client the SNIP of a relay that does. (In the paper, +the relay uses a digest of previous messages to decide which routing +index to use. Instead, we have the client send an index field.) + +This requires changes to the BEGIN and END cell formats. After the +"flags" field in BEGIN cells, we add an extension mechanism: + + struct begin_cell { + nulterm addr_port; + u32 flags; + u8 n_extensions; + struct extension exts[n_extensions]; + } + +We allow the `snip_index_pos` link specifier type to appear as a begin +extension. + +END cells will need to have a new format that supports including policy and +SNIP information. This format is enabled whenever a new `EXTENDED_END_CELL` +flag appears in the begin cell. + + struct end_cell { + u8 tag IN [ 0xff ]; // indicate that this isn't an old-style end cell. + u8 reason; + u8 n_extensions; + struct extension exts[n_extensions]; + } + +We define three END cell extensions. Two types are for addresses, that +indicate what address was resolved and the associated TTL: + + struct end_ext_ipv4 { + u32 addr; + u32 ttl; + } + struct end_ext_ipv6 { + u8 addr[16]; + u32 ttl; + } + +One new END cell extension is used for delegated verifiable selection: + + struct end_ext_alt_snip { + u16 index_id; + u8 snip[..]; + } + +This design may require END cells to become wider; see +319-wide-everything.md for an example proposal to +supersede proposal 249 and allow more wide cell types. + + <a id='S6.4'></a> + +## Universal path restrictions + +There are some restrictions on Tor paths that all clients should obey, +unless they are configured not to do so. Some of these restrictions +(like "start paths with a Guard node" or "don't use an Exit as a middle +when Exit bandwidth is scarce") are captured by the index system. Some +other restrictions are not. Here we describe how to implement those. + +The general approach taken here is "build and discard". Since most +possible paths will not violate these universal restrictions, we +accept that a fraction of the paths built will not be usable. +Clients tear them down a short time after they are built. + +Clients SHOULD discard a circuit if, after it has been built, they +find that it contains the same relay twice, or it contains more than +one relay from the same family or from the same subnet. + +Clients MAY remember the SNIPs they have received, and use those +SNIPs to avoid index ranges that they would automatically reject. +Clients SHOULD NOT store any SNIP for longer than it is maximally +recent. + +> NOTE: We should continue to monitor the fraction of paths that are +> rejected in this way. If it grows too high, we either need to amend +> the path selection rules, or change authorities to e.g. forbid more +> than a certain fraction of relay weight in the same family or subnet. + +> FUTURE WORK: It might be a good idea, if these restrictions truly are +> 'universal', for relays to have a way to say "You wouldn't want that +> SNIP; I am giving you the next one in sequence" and send back both +> SNIPs. This would need some signaling in the EXTEND/EXTENDED cells. + + <a id='S6.5'></a> + +## Client-configured path restrictions + +Sometimes users configure their clients with path restrictions beyond +those that are in ordinary use. For example, a user might want to enter +only from US relays, but never exit from US. Or they might be +configured with a short list of vanguards to use in their second +position. + + <a id='S6.5.1'></a> + +### Handling "light" restrictions + +If a restriction only excludes a small number of relays, then clients +can continue to use the "build and discard" methodology described above. + + <a id='S6.5.2'></a> + +### Handling some "heavy" restrictions + +Some restrictions can exclude most relays, and still be reasonably easy +to implement if they only _include_ a small fraction of relays. For +example, if the user has a EntryNodes restriction that contains only a +small group of relays by exact IP address, the client can connect or +extend to one of those addresses specifically. + +If we decide IP ranges are important, that IP addresses without +ports are important, or that key specifications are important, we +can add routing indices that list relays by IP, by RSAId, or by +Ed25519 Id. Clients could then use those indices to remotely +retrieve SNIPs, and then use those SNIPs to connect to their +selected relays. + +> Future work: we need to decide how many of the above functions to actually +> support. + + <a id='S6.5.3'></a> + +### Recognizing too-heavy restrictions + +The above approaches do not handle all possible sets of restrictions. In +particular, they do a bad job for restrictions that ban a large fraction +of paths in a way that is not encodeable in the routing index system. + +If there is substantial demand for such a path restriction, implementors +and authority operators should figure out how to implement it in the +index system if possible. + +Implementations SHOULD track what fraction of otherwise valid circuits +they are closing because of the user's configuration. If this fraction +is above a certain threshold, they SHOULD issue a warning; if it is +above some other threshold, they SHOULD refuse to build circuits +entirely. + +> Future work: determine which fraction appears in practice, and use that to +> set the appropriate thresholds above. + + <a id='S7'></a> + +# Using and providing onion services with Walking Onions + +Both live versions of the onion service design rely on a ring of +hidden service directories for use in uploading and downloading +hidden service descriptors. With Walking Onions, we can use routing +indices based on Ed25519 or RSA identity keys to retrieve this data. + +(The RSA identity ring is unchanging, whereas the Ed25519 ring +changes daily based on the shared random value: for this reason, we +have to compute two simultaneous indices for Ed25519 rings: one for +the earlier date that is potentially valid, and one for the later +date that is potentially valid. We call these `hsv3-early` and +`hsv3-late`.) + +Beyond the use of these indices, however, there are other steps that +clients and services need to take in order to maintain their privacy. + + <a id='S7.1'></a> + +## Finding HSDirs + +When a client or service wants to contact an HSDir, it SHOULD do so +anonymously, by building a three-hop anonymous circuit, and then +extending it a further hop using the snip_span link specifier to +upload to any of the first 3 replicas on the ring. Clients SHOULD +choose an 'nth' at random; services SHOULD upload to each replica. + +Using a full 80-bit or 256-bit index position in the link specifier +would leak the chosen service to somebody other than the directory. +Instead, the client or service SHOULD truncate the identifier to a +number of bytes equal to the network parameter `hsv2-index-bytes` or +`hsv3-index-bytes` respectively. (See Appendix C.) + + <a id='S7.2'></a> + +## SNIPs for introduction points + +When services select an introduction point, they should include the +SNIP for the introduction point in their hidden service directory +entry, along with the introduction-point fields. The format for +this entry is: + + "snip" NL snip NL + [at most once per introduction points] + +Clients SHOULD begin treating the link specifier and onion-key +fields of each introduction point as optional when the "snip" field +is present, and when the `hsv3-tolerate-no-legacy` network parameter +is set to 1. If either of these fields _is_ present, and the SNIP is +too, then these fields MUST match those listed in the SNIPs. +Clients SHOULD reject descriptors with mismatched fields, and alert +the user that the service may be trying a partitioning attack. +The "legacy-key" and "legacy-key-cert" fields, if present, should be +checked similarly. + +> Using the SNIPs in these ways allows services to prove that their +> introduction points have actually been listed in the consensus +> recently. It also lets clients use introduction point features +> that the relay might not understand. + +Services should include these fields based on a set of network +parameters: `hsv3-intro-snip` and `hsv3-intro-legacy-fields`. +(See appendix C.) + +Clients should use these fields only when Walking Onions support is +enabled; see section 09. + + <a id='S7.3'></a> + +## SNIPs for rendezvous points + +When a client chooses a rendezvous point for a v3 onion service, it +similarly has the opportunity to include the SNIP of its rendezvous +point in the encrypted part of its INTRODUCE cell. (This may cause +INTRODUCE cells to become fragmented; see proposal about fragmenting +relay cells.) + +> Using the SNIPs in these ways allows services to prove that their +> introduction points have actually been listed in the consensus +> recently. It also lets services use introduction point features +> that the relay might not understand. + +To include the SNIP, the client places it in an extension in the +INTRODUCE cell. The onion key can now be omitted[*], along with +the link specifiers. + +> [*] Technically, we use a zero-length onion key, with a new type +> "implicit in SNIP". + +To know whether the service can recognize this kind of cell, the +client should look for the presence of a "snips-allowed 1" field in +the encrypted part of the hidden service descriptor. + +In order to prevent partitioning, services SHOULD NOT advertise +"snips-allowed 1" unless the network parameter +"hsv3-rend-service-snip" is set to 1. Clients SHOULD NOT use this +field unless "hsv3-rend-client-snip" is set to 1. + + <a id='S7.4'></a> + +## TAP keys and where to find them + +If v2 hidden services are still supported when Walking Onions arrives +on the network, we have two choices: We could migrate them to use +ntor keys instead of TAP, or we could provide a way for TAP keys to +be advertised with Walking Onions. + +The first option would appear to be far simpler. See +proposal draft 320-tap-out-again.md. + +The latter option would require us to put RSA-1024 keys in SNIPs, or +put a digest of them in SNIPs and give some way to retrieve them +independently. + +(Of course, it's possible that we will have v2 onion services +deprecated by the time Walking Onions is implemented. If so, that +will simplify matters a great deal too.) + + + <a id='S8'></a> + +# Tracking Relay honesty + +Our design introduces an opportunity for dishonest relay behavior: +since multiple ENDIVEs are valid at the same time, a malicious relay +might choose any of several possible SNIPs in response to a client's +routing index value. + +Here we discuss several ways to mitigate this kind of attack. + + <a id='S8.1'></a> + +## Defense: index stability + +First, the voting process should be designed such that relays do not +needlessly move around the routing index. For example, it would +_not_ be appropriate to add an index type whose value is computed by +first putting the relays into a pseudorandom order. Instead, index +voting should be deterministic and tend to give similar outputs for +similar inputs. + +This proposal tries to achieve this property in its index voting +algorithms. We should measure the degree to which we succeed over +time, by looking at all of the ENDIVEs that are valid at any +particular time, and sampling several points for each index to see +how many distinct relays are listed at each point, across all valid +ENDIVEs. + +We do not need this stability property for routing indices whose +purpose is nonrandomized relay selection, such as those indices used +for onion service directories. + + <a id='S8.2'></a> + +## Defense: enforced monotonicity + +Once an honest relay has received an ENDIVE, it has no reason to +keep any previous ENDIVEs or serve SNIPs from them. Because of +this, relay implementations SHOULD ensure that no data is served +from a new ENDIVE until all the data from an old ENDIVE is +thoroughly discarded. + +Clients and relays can use this monotonicity property to keep relays +honest: once a relay has served a SNIP with some timestamp `T`, that +relay should never serve any other SNIP with a timestamp earlier than +`T`. Clients SHOULD track the most recent SNIP timestamp that they +have received from each of their guards, and MAY track the most +recent SNIP timestamps that they have received from other relays as +well. + + <a id='S8.3'></a> + +## Defense: limiting ENDIVE variance within the network. + +The primary motivation for allowing long (de facto) lifespans on +today's consensus documents is to keep the network from grinding to +a halt if the authorities fail to reach consensus for a few hours. +But in practice, _if_ there is a consensus, then relays should have +it within an hour or two, so they should not be falling a full day out +of date. + +Therefore we can potentially add a client behavior that, within N +minutes after the client has seen any SNIP with timestamp `T`, +the client should not accept any SNIP with timestamp earlier than +`T - Delta`. + +Values for N and Delta are controlled by network parameters +(`enforce-endive-dl-delay-after` and `allow-endive-dl-delay` +respectively in appendix C). N should be about as long as we expect +it to take for a single ENDIVE to propagate to all the relays on the +network; Delta should be about as long as we would like relays to go +between updating ENDIVEs under ideal circumstances. + + <a id='S9'></a> + +# Migrating to Walking Onions + +This proposal is a major change in the Tor network that will +eventually require the participation of all relays [*], and will make +clients who support it distinguishable from clients that don't. + +> [*] Technically, the last relay in the path doesn't need support. + +To keep the compatibility issues under control, here is the order in which it +should be deployed on the network. + +1. First, authorities should add support for voting on ENDIVEs. + +2. Relays may immediately begin trying to download and reconstruct + ENDIVEs. (Relay versions are public, so they leak nothing by + doing this.) + +3. Once a sufficient number of authorities are voting on ENDIVEs and + unlikely to downgrade, relays should begin serving parameter documents + and responding to walking-onion EXTEND and CREATE cells. (Again, + relay versions are public, so this doesn't leak.) + +4. In parallel with relay support, Tor should also add client + support for Walking Onions. This should be disabled by default, + however, since it will only be usable with the subset of relays + that support Walking Onions, and since it would make clients + distinguishable. + +5. Once enough of the relays (possibly, all) support Walking Onions, + the client support can be turned on. They will not be able to + use old relays that do not support Walking Onions. + +6. Eventually, relays that do not support Walking Onions should not + be listed in the consensus. + +Client support for Walking Onions should be enabled or disabled, at +first, with a configuration option. Once it seems stable, the +option should have an "auto" setting that looks at a network +parameter. This parameter should NOT be a simple "on" or "off", +however: it should be the minimum client version whose support for +Walking Onions is believed to be correct. + + <a id='S9.1'></a> + +## Future work: migrating away from sedentary onions + +Once all clients are using Walking Onions, we can take a pass +through the Tor specifications and source code to remove +no-longer-needed code. + +Clients should be the first to lose support for old directories, +since nobody but the clients depends on the clients having them. +Only after obsolete clients represent a very small fraction of the +network should relay or authority support be disabled. + +Some fields in router descriptors become obsolete with Walking +Onions, and possibly router descriptors themselves should be +replaced with cbor objects of some kind. This can only happen, +however, after no descriptor users remain. + + <a id='SA'></a> + +# Appendices + + <a id='SA.1'></a> + +## Appendix A: Glossary + +I'm going to put a glossary here so I can try to use these terms +consistently. + +*SNIP* -- A "Separable Network Index Proof". Each SNIP contains the +information necessary to use a single Tor relay, and associates the relay +with one or more index ranges. SNIPs are authenticated by the directory +authorities. + +*ENDIVE* -- An "Efficient Network Directory with Individually Verifiable +Entries". An ENDIVE is a collection of SNIPS downloaded by relays, +authenticated by the directory authorities. + +*Routing index* -- A routing index is a map from binary strings to relays, +with some given property. Each relay that is in the routing index is +associated with a single *index range*. + +*Index range* -- A range of positions withing a routing index. Each range + contains many positions. + +*Index position* -- A single value within a routing index. Every position in + a routing index corresponds to a single relay. + +*ParamDoc* -- A network parameters document, describing settings for the + whole network. Clients download this infrequently. + +*Index group* -- A collection of routing indices that are encoded in the same + SNIPs. + + <a id='SA.2'></a> + +## Appendix B: More cddl definions + + ; These definitions are used throughout the rest of the + ; proposal + + ; Ed25519 keys are 32 bytes, and that isn't changing. + Ed25519PublicKey = bstr .size 32 + + ; Curve25519 keys are 32 bytes, and that isn't changing. + Curve25519PublicKey = bstr .size 32 + + ; 20 bytes or fewer: legacy RSA SHA1 identity fingerprint. + RSAIdentityFingerprint = bstr + + ; A 4-byte integer -- or to be cddl-pedantic, one that is + ; between 0 and UINT32_MAX. + uint32 = uint .size 4 + + ; Enumeration to define integer equivalents for all the digest algorithms + ; that Tor uses anywhere. Note that some of these are not used in + ; this spec, but are included so that we can use this production + ; whenever we need to refer to a hash function. + DigestAlgorithm = &( + NoDigest: 0, + SHA1 : 1, ; deprecated. + SHA2-256: 2, + SHA2-512: 3, + SHA3-256: 4, + SHA3-512: 5, + Kangaroo12-256: 6, + Kangaroo12-512: 7, + ) + + ; A digest is represented as a binary blob. + Digest = bstr + + ; Enumeration for different signing algorithms. + SigningAlgorithm = &( + RSA-OAEP-SHA1 : 1, ; deprecated. + RSA-OAEP-SHA256: 2, ; deprecated. + Ed25519 : 3, + Ed448 : 4, + BLS : 5, ; Not yet standardized. + ) + + PKAlgorithm = &( + SigningAlgorithm, + + Curve25519: 100, + Curve448 : 101 + ) + + KeyUsage = &( + ; A master unchangeable identity key for this authority. May be + ; any signing key type. Distinct from the authority's identity as a + ; relay. + AuthorityIdentity: 0x10, + ; A medium-term key used for signing SNIPs, votes, and ENDIVEs. + SNIPSigning: 0x11, + + ; These are designed not to collide with the "list of certificate + ; types" or "list of key types" in cert-spec.txt + ) + + CertType = &( + VotingCert: 0x12, + ; These are designed not to collide with the "list of certificate + ; types" in cert-spec.txt. + ) + + LinkSpecifier = bstr + + <a id='SA.3'></a> + +## Appendix C: new numbers to assign. + +Relay commands: + +* We need a new relay command for "FRAGMENT" per proposal 319. + +CREATE handshake types: + +* We need a type for the NIL handshake. + +* We need a handshake type for the new ntor handshake variant. + +Link specifiers: + +* We need a link specifier for extend-by-index. + +* We need a link specifier for dirport URL. + +Certificate Types and Key Types: + +* We need to add the new entries from CertType and KeyUsage to + cert-spec.txt, and possibly merge the two lists. + +Begin cells: + +* We need a flag for Delegated Verifiable Selection. + +* We need an extension type for extra data, and a value for indices. + +End cells: + +* We need an extension type for extra data, a value for indices, a + value for IPv4 addresses, and a value for IPv6 addresses. + +Extensions for decrypted INTRODUCE2 cells: + +* A SNIP for the rendezvous point. + +Onion key types for decrypted INTRODUCE2 cells: + +* An "onion key" to indicate that the onion key for the rendezvous point is + implicit in the SNIP. + +New URLs: + +* A URL for fetching ENDIVEs. + +* A URL for fetching client / relay parameter documents + +* A URL for fetching detached SNIP signatures. + +Protocol versions: + +(In theory we could omit many new protovers here, since being listed +in an ENDIVE implies support for the new protocol variants. We're +going to use new protovers anyway, however, since doing so keeps our +numbering consistent.) + +We need new versions for these subprotocols: + +* _Relay_ to denote support for new handshake elements. + +* _DirCache_ to denote support for ENDIVEs, paramdocs, binary diffs, etc. + +* _Cons_ to denote support for ENDIVEs + + + <a id='SA.4'></a> + +## Appendix D: New network parameters. + +We introduce these network parameters: + +From section 5: + +* `create-pad-len` -- Clients SHOULD pad their CREATE cell bodies + to this size. + +* `created-pad-len` -- Relays SHOULD pad their CREATED cell bodies to this + size. + +* `extend-pad-len` -- Clients SHOULD pad their EXTEND cell bodies to this + size. + +* `extended-pad-len` -- Relays SHOULD pad their EXTENDED cell bodies to this +size. + +From section 7: + +* `hsv2-index-bytes` -- how many bytes to use when sending an hsv2 index + position to look up a hidden service directory. Min: 1, + Max: 40. Default: 4. + +* `hsv3-index-bytes` -- how many bytes to use when sending an hsv3 index + position to look up a hidden service directory. Min: 1, + Max: 128. Default: 4. + +* `hsv3-intro-legacy-fields` -- include legacy fields in service descriptors. + Min: 0. Max: 1. Default: 1. + +* `hsv3-intro-snip` -- include intro point SNIPs in service descriptors. + Min: 0. Max: 1. Default: 0. + +* `hsv3-rend-service-snip` -- Should services advertise and accept rendezvous + point SNIPs in INTRODUCE2 cells? Min: 0. Max: 1. Default: 0. + +* `hsv3-rend-client-snip` -- Should clients place rendezvous point SNIPS in + INTRODUCE2 cells when the service supports it? + Min: 0. Max: 1. Default: 0. + +* `hsv3-tolerate-no-legacy` -- Should clients tolerate v3 service descriptors + that don't have legacy fields? Min: 0. Max: 1. Default: 0. + +From section 8: + +* `enforce-endive-dl-delay-after` -- How many seconds after receiving a + SNIP with some timestamp T does a client wait for rejecting older SNIPs? + Equivalent to "N" in "limiting ENDIVE variance within the network." + Min: 0. Max: INT32_MAX. Default: 3600 (1 hour). + +* `allow-endive-dl-delay` -- Once a client has received an SNIP with + timestamp T, it will not accept any SNIP with timestamp earlier than + "allow-endive-dl-delay" seconds before T. + Equivalent to "Delta" in "limiting ENDIVE variance within the network." + Min: 0. Max: 2592000 (30 days). Default: 10800 (3 hours). + + <a id='SA.5'></a> + +## Appendix E: Semantic sorting for CBOR values. + +Some voting operations assume a partial ordering on CBOR values. We define +such an ordering as follows: + + * bstr and tstr items are sorted lexicographically, as if they were + compared with a version of strcmp() that accepts internal NULs. + * uint and int items are are sorted by integer values. + * arrays are sorted lexicographically by elements. + * Tagged items are sorted as if they were not tagged. + * Maps do not have any sorting order. + * False precedes true. + * Otherwise, the ordering between two items is not defined. + +More specifically: + + Algorithm: compare two cbor items A and B. + + Returns LT, EQ, GT, or NIL. + + While A is tagged, remove the tag from A. + While B is tagged, remove the tag from B. + + If A is any integer type, and B is any integer type: + return A cmp B + + If the type of A is not the same as the type of B: + return NIL. + + If A and B are both booleans: + return int(A) cmp int(B), where int(false)=0 and int(B)=1. + + If A and B are both tstr or both bstr: + while len(A)>0 and len(B)>0: + if A[0] != B[0]: + return A[0] cmp B[0] + Discard A[0] and B[0] + If len(A) == len(B) == 0: + return EQ. + else if len(A) == 0: + return LT. (B is longer) + else: + return GT. (A is longer) + + If A and B are both arrays: + while len(A)>0 and len(B)>0: + Run this algorithm recursively on A[0] and B[0]. + If the result is not EQ: + Return that result. + Discard A[0] and B[0] + If len(A) == len(B) == 0: + return EQ. + else if len(A) == 0: + return LT. (B is longer) + else: + return GT. (A is longer) + + Otherwise, A and B are a type for which we do not define an ordering, + so return NIL. + + <a id='SA.6'></a> + +## Appendix F: Example voting rules + +Here we give a set of voting rules for the fields described in our initial +VoteDocuments. + + { + meta: { + voting-delay: { op: "Mode", tie_low:false, + type:["tuple","uint","uint"] }, + voting-interval: { op: "Median", type:"uint" }, + snip-lifespan: {op: "Mode", type:["tuple","uint","uint","uint"] }, + c-param-lifetime: {op: "Mode", type:["tuple","uint","uint","uint"] }, + s-param-lifetime: {op: "Mode", type:["tuple","uint","uint","uint"] }, + cur-shared-rand: {op: "Mode", min_count: "qfield", + type:["tuple","uint","bstr"]}, + prev-shared-rand: {op: "Mode", min_count: "qfield", + type:["tuple","uint","bstr"]}, + client-params: { + recommend-versions: {op:"SetJoin", min_count:"qfield",type:"tstr"}, + require-protos: {op:"BitThreshold", min_count:"sqauth"}, + recommend-protos: {op:"BitThreshold", min_count:"qauth"}, + params: {op:"MapJoin",key_min_count:"qauth", + keytype:"tstr", + item_op:{op:"Median",min_vote:"qauth",type:"uint"}, + }, + certs: {op:"SetJoin",min_count:1, type: 'bstr'}, + }, + ; Use same value for server-params. + relay: { + meta: { + desc: {op:"Mode", min_count:"qauth",tie_low:false, + type:["uint","bstr"] }, + flags: {op:"MapJoin", key_type:"tstr", + item_op:{op:"Mode",type:"bool"}}, + bw: {op:"Median", type:"uint" }, + mbw :{op:"Median", type:"uint" }, + rsa-id: {op:"Mode", type:"bstr"}, + }, + snip: { + ; ed25519 key is handled as any other value. + 0: { op:"DerivedFrom", fields:[["RM","desc"]], + rule:{op:"Mode",type="bstr"} }, + + ; ntor onion key. + 1: { op:"DerivedFrom", fields:[["RM","desc"]], + rule:{op:"Mode",type="bstr"} }, + + ; link specifiers. + 2: { op: "CborDerived", + item-op: { op:"DerivedFrom", fields:[["RM","desc"]], + rule:{op:"Mode",type="bstr" } } }, + + ; software description. + 3: { op:"DerivedFrom", fields:[["RM","desc"]], + rule:{op:"Mode",type=["tuple", "tstr", "tstr"] } }, + + ; protovers. + 4: { op: "CborDerived", + item-op: { op:"DerivedFrom", fields:[["RM","desc"]], + rule:{op:"Mode",type="bstr" } } }, + + ; families. + 5: { op:"SetJoin", min_count:"qfield", type:"bstr" }, + + ; countrycode + 6: { op:"Mode", type="tstr" } , + + ; 7: exitpolicy. + 7: { op: "CborDerived", + item-op: { op: "DerivedFrom", fields:[["RM","desc"],["CP","port-classes"]], + rule:{op:"Mode",type="bstr" } } }, + }, + legacy: { + "sha1-desc": { op:"DerivedFrom", + fields:[["RM","desc"]], + rule:{op:"Mode",type="bstr"} }, + "mds": { op:"DerivedFrom", + fields:[["RM":"desc"]], + rule: { op:"ThresholdOp", min_count: "qauth", + multi_low:false, + type:["tuple", "uint", "uint", + "bstr", "bstr" ] }}, + } + } + indices: { + ; See appendix G. + } + } + + <a id='SA.7'></a> + +## Appendix G: A list of routing indices + +Middle -- general purpose index for use when picking middle hops in +circuits. Bandwidth-weighted for use as middle relays. May exclude +guards and/or exits depending on overall balance of resources on the +network. + +Formula: + type: 'weighted', + source: { + type:'bw', require_flags: ['Valid'], 'bwfield' : ["RM", "mbw"] + }, + weight: { + [ "!Exit", "!Guard" ] => "Wmm", + [ "Exit", "Guard" ] => "Wbm", + [ "Exit", "!Guard" ] => "Wem", + [ "!Exit", "Guard" ] => "Wgm", + } + +Guard -- index for choosing guard relays. This index is not used +directly when extending, but instead only for _picking_ guard relays +that the client will later connect to directly. Bandwidth-weighted +for use as guard relays. May exclude guard+exit relays depending on +resource balance. + + type: 'weighted', + source: { + type:'bw', + require_flags: ['Valid', "Guard"], + bwfield : ["RM", "mbw"] + }, + weight: { + [ "Exit", ] => "Weg", + } + +HSDirV2 -- index for finding spots on the hsv2 directory ring. + +Formula: + type: 'rsa-id', + +HSDirV3-early -- index for finding spots on the hsv3 directory ring +for the earlier of the two "active" days. (The active days are +today, and whichever other day is closest to the time at which the +ENDIVE becomes active.) + +Formula: + type: 'ed-id' + alg: SHA3-256, + prefix: b"node-idx", + suffix: (depends on shared-random and time period) + +HSDirV3-late -- index for finding spots on the hsv3 directory ring +for the later of the two "active" days. + +Formula: as HSDirV3-early, but with a different suffix. + +Self -- A virtual index that never appears in an ENDIVE. SNIPs with +this index are unsigned, and occupy the entire index range. This +index is used with bridges to represent each bridge's uniqueness. + +Formula: none. + +Exit0..ExitNNN -- Exits that can connect to all ports within a given +PortClass 0 through NNN. + +Formula: + + type: 'weighted', + source: { + type:'bw', + ; The second flag here depends on which portclass this is. + require_flags: [ 'Valid', "P@3" ], + bwfield : ["RM", "mbw"] + }, + weight: { + [ "Guard", ] => "Wge", + } + + <a id='SA.8'></a> + +## Appendix H: Choosing good clusters of exit policies + +With Walking Onions, we cannot easily support all the port +combinations [*] that we currently allow in the "policy summaries" +that we support in microdescriptors. + +> [*] How many "short policy summaries" are there? The number would be +> 2^65535, except for the fact today's Tor doesn't permit exit policies to +> get maximally long. + +In the Walking Onions whitepaper +(https://crysp.uwaterloo.ca/software/walkingonions/) we noted in +section 6 that we can group exit policies by class, and get down to +around 220 "classes" of port, such that each class was either +completely supported or completely unsupported by every relay. But +that number is still impractically large: if we need ~11 bytes to +represent a SNIP index range, we would need an extra 2320 bytes per +SNIP, which seems like more overhead than we really want. + +We can reduce the number of port classes further, at the cost of +some fidelity. For example, suppose that the set {https,http} is +supported by relays {A,B,C,D}, and that the set {ssh,irc} is +supported by relays {B,C,D,E}. We could combine them into a new +port class {https,http,ssh,irc}, supported by relays {B,C,D} -- at +the expense of no longer being able to say that relay A supported +{https,http}, or that relay E supported {ssh,irc}. + +This loss would not necessarily be permanent: the operator of relay +A might be willing to add support for {ssh,irc}, and the operator of +relay E might be willing to add support for {https,http}, in order +to become useful as an exit again. + +(We might also choose to add a configuration option for relays to +take their exit policies directly from the port classes in the +consensus.) + +How might we select our port classes? Three general categories of +approach seem possible: top-down, bottom-up, and hybrid. + +In a top-down approach, we would collaborate with authority and exit +operators to identify _a priori_ reasonable classes of ports, such +as "Web", "Chat", "Miscellaneous internet", "SMTP", and "Everything +else". Authorities would then base exit indices on these classes. + +In a bottom-up approach, we would find an algorithm to run on the +current exit policies in order to find the "best" set of port +classes to capture the policies as they stand with minimal loss. +(Quantifying this loss is nontrivial: do we weight by bandwidth? Do +we weight every port equally, or do we call some more "important" +than others?) + +> See exit-analysis for an example tool that runs a greedy algorithm +> to find a "good" partition using an unweighted, +> all-ports-are-equal cost function. See the files +> "greedy-set-cov-{4,8,16}" for examples of port classes produced +> by this algorithm. + +In a hybrid approach, we'd use top-down and bottom-up techniques +together. For example, we could start with an automated bottom-up +approach, and then evaluate it based feedback from operators. Or we +could start with a handcrafted top-down approach, and then use +bottom-up cost metrics to look for ways to split or combine those +port classes in order to represent existing policies with better +fidelity. + + + <a id='SA.9'></a> + +## Appendix I: Non-clique topologies with Walking Onions + +For future work, we can expand the Walking Onions design to +accommodate network topologies where relays are divided into groups, +and not every group connects to every other. To do so requires +additional design work, but here I'll provide what I hope will be a +workable sketch. + +First, each SNIP needs to contain an ID saying which relay group it +belongs to, and an ID saying which relay group(s) may serve it. + +When downloading an ENDIVE, each relay should report its own +identity, and receive an ENDIVE for that identity's group. It +should contain both the identities of relays in the group, and the +SNIPs that should be served for different indices by members of that +group. + +The easy part would be to add an optional group identity field to +SNIPs, defaulting to 0, indicating that the relay belongs to that +group, and an optional served-by field to each SNIP, indicating +groups that may serve the SNIP. You'd only accept SNIPs if they +were served by a relay in a group that was allowed to serve them. + +Would guards work? Sure: we'd need to have guard SNIPS served by +middle relays. + +For hsdirs, we'd need to have either multiple shards of the hsdir +ring (which seems like a bad idea?) or have all middle nodes able to +reach the hsdir ring. + +Things would get tricky with making onion services work: if you need +to use an introduction point or a rendezvous point in group X, then +you need to get there from a relay that allows connections to group +X. Does this imply indices meaning "Can reach group X" or +"two-degrees of group X"? + +The question becomes: "how much work on alternative topologies does +it make sense to deploy in advance?" It seems like there are +unknowns affecting both client and relay operations here, which +suggests that advance deployment for either case is premature: we +can't necessarily make either clients or relays "do the right thing" +in advance given what we now know of the right thing. + + <a id='SA.10'></a> + +## Appendix Z: acknowledgments + +Thanks to Peter Palfrader for his original design in proposal 141, +and to the designers of PIR-Tor, both of which inspired aspects of +this Walking Onions design. + +Thanks to Chelsea Komlo, Sajin Sasy, and Ian Goldberg for feedback on +an earlier version of this design. + +Thanks to David Goulet, Teor, and George Kadianakis for commentary on +earlier versions of proposal 300. + +Thanks to Chelsea Komlo and Ian Goldberg for their help fleshing out +so many ideas related to Walking Onions in their work on the design +paper. + +Thanks to Teor for improvements to diff format, ideas about grouping +exit ports, and numerous ideas about getting topology and +distribution right. + +These specifications were supported by a grant from the Zcash +Foundation. +

1 0

[translation/tails-misc_release] https://gitweb.torproject.org/translation.git/commit/?h=tails-misc_release
by translation＠torproject.org 03 Jun '20

03 Jun '20

commit 2e33513c9290e78a22eb664d2ccf3de73ec25613 Author: Translation commit bot <translation(a)torproject.org> Date: Wed Jun 3 14:19:21 2020 +0000 https://gitweb.torproject.org/translation.git/commit/?h=tails-misc_release --- el.po | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/el.po b/el.po index 00a1b081b5..4b1b2a391e 100644 --- a/el.po +++ b/el.po @@ -30,7 +30,7 @@ msgstr "" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-03-21 09:59+0100\n" "PO-Revision-Date: 2020-06-03 07:11+0000\n" -"Last-Translator: george k <norhorn(a)gmail.com>\n" +"Last-Translator: george kitsoukakis <norhorn(a)gmail.com>\n" "Language-Team: Greek (http://www.transifex.com/otf/torproject/language/el/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n"

1 0

[onionperf/master] Initial interface extension from Karsten
by karsten＠torproject.org 03 Jun '20

03 Jun '20

commit 8778a2424912a7a6c13dde00d3e16a374a26106c Author: Ana Custura <ana(a)netstat.org.uk> Date: Sun May 31 13:21:09 2020 +0100 Initial interface extension from Karsten --- onionperf/onionperf | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/onionperf/onionperf b/onionperf/onionperf index 38ef443..d5352b0 100755 --- a/onionperf/onionperf +++ b/onionperf/onionperf @@ -278,8 +278,9 @@ files generated by this script will be written""", visualize_parser.set_defaults(func=visualize, formatter_class=my_formatter_class) visualize_parser.add_argument('-d', '--data', - help="""Append a PATH to a onionperf.analysis.json analysis results file, and a LABEL that we - should use for the graph legend for this dataset""", + help="""Append a file or directory PATH to an onionperf.analysis.json + analysis results file or directory of such files, and a LABEL + that we should use for the graph legend for this dataset""", metavar=("PATH", "LABEL"), nargs=2, required="True",

1 0

[onionperf/master] Adds support for a list of multiple analyses
by karsten＠torproject.org 03 Jun '20

03 Jun '20

commit 7032b4fdc3441c06bf08ddf3a7f9055c1b53cd64 Author: Ana Custura <ana(a)netstat.org.uk> Date: Sun May 31 14:24:50 2020 +0100 Adds support for a list of multiple analyses --- onionperf/onionperf | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/onionperf/onionperf b/onionperf/onionperf index d5352b0..85cfca1 100755 --- a/onionperf/onionperf +++ b/onionperf/onionperf @@ -282,7 +282,7 @@ files generated by this script will be written""", analysis results file or directory of such files, and a LABEL that we should use for the graph legend for this dataset""", metavar=("PATH", "LABEL"), - nargs=2, + nargs='+', required="True", action=PathStringArgsAction, dest="datasets") @@ -384,11 +384,13 @@ def visualize(args): from onionperf.analysis import Analysis tgen_viz = TGenVisualization() - for (path, label) in args.datasets: - anal = Analysis.load(filename=path) - if anal is not None: - tgen_viz.add_dataset(anal, label) - + for (paths, label) in args.datasets: + analyses = [] + for path in paths: + analysis = Analysis.load(filename=path) + if analysis is not None: + analyses.append(analysis) + tgen_viz.add_dataset(analyses, label) tgen_viz.plot_all(args.prefix) def type_nonnegative_integer(value):

1 0

[onionperf/master] Adds logic to deal with dirs and individual analysis files
by karsten＠torproject.org 03 Jun '20

03 Jun '20

commit 3fae1756f6919658f7fad223026483f754f6a58b Author: Ana Custura <ana(a)netstat.org.uk> Date: Sun May 31 14:26:50 2020 +0100 Adds logic to deal with dirs and individual analysis files --- onionperf/onionperf | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/onionperf/onionperf b/onionperf/onionperf index 85cfca1..08e1406 100755 --- a/onionperf/onionperf +++ b/onionperf/onionperf @@ -457,17 +457,38 @@ def type_str_date_in(value): # a custom action for passing in experimental data directories when plotting class PathStringArgsAction(argparse.Action): def __call__(self, parser, namespace, values, option_string=None): - # extract the path to our data, and the label for the legend - p = os.path.abspath(os.path.expanduser(values[0])) - s = values[1] - # check the path exists - if not os.path.exists(p): raise argparse.ArgumentError(self, "The supplied path does not exist: '{0}'".format(p)) + # at least two arguments are required + if len(values)<2: raise argparse.ArgumentError(self, "Must specify at least one path and one data label") + + # extract the paths to our data, and the label for the legend + label = values[-1] + # fail if the label is a path + check_label = os.path.abspath(os.path.expanduser(label)) + if os.path.exists(check_label): + raise argparse.ArgumentError(self, "The supplied label cannot be a path") + + paths = values[:-1] + dir_paths = [] + for item in paths: + p = os.path.abspath(os.path.expanduser(item)) + if not os.path.exists(p): raise argparse.ArgumentError(self, "The supplied path does not exist: '{0}'".format(p)) + if os.path.isdir(p): + from onionperf import reprocessing + dir_paths.extend(reprocessing.collect_logs(item, "*json*")) + + # remove any directories from the list of paths + paths = [p for p in paths if not os.path.isdir(p)] + # add all json.xz files found in directories to the list of paths + paths.extend(dir_paths) + # remove any duplicates + paths = list(set(paths)) + # remove the default if "_didremovedefault" not in namespace: setattr(namespace, self.dest, []) setattr(namespace, "_didremovedefault", True) # append out new experiment path dest = getattr(namespace, self.dest) - dest.append((p, s)) + dest.append((paths, label)) if __name__ == '__main__': sys.exit(main())

1 0

[onionperf/master] Tweaks to visualize command help text
by karsten＠torproject.org 03 Jun '20

03 Jun '20

commit 01f494ef65cce2fdf01b1ca979e41e2b3b35276b Author: Ana Custura <ana(a)netstat.org.uk> Date: Sun May 31 14:36:53 2020 +0100 Tweaks to visualize command help text --- onionperf/onionperf | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/onionperf/onionperf b/onionperf/onionperf index 08e1406..2c92703 100755 --- a/onionperf/onionperf +++ b/onionperf/onionperf @@ -278,9 +278,9 @@ files generated by this script will be written""", visualize_parser.set_defaults(func=visualize, formatter_class=my_formatter_class) visualize_parser.add_argument('-d', '--data', - help="""Append a file or directory PATH to an onionperf.analysis.json - analysis results file or directory of such files, and a LABEL - that we should use for the graph legend for this dataset""", + help="""Appends one or more PATHS to OnionPerf + analysis results files or directories of such files, and a LABEL + to be used for the graph legend for this dataset""", metavar=("PATH", "LABEL"), nargs='+', required="True",

1 0

[onionperf/master] Adds visualisation support for a list of multiple analyses
by karsten＠torproject.org 03 Jun '20

03 Jun '20

commit c73a3cea700dd6001d3493ab2c4ea4ec37642582 Author: Ana Custura <ana(a)netstat.org.uk> Date: Sun May 31 14:25:32 2020 +0100 Adds visualisation support for a list of multiple analyses --- onionperf/visualization.py | 41 +++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/onionperf/visualization.py b/onionperf/visualization.py index c187cb6..339291a 100644 --- a/onionperf/visualization.py +++ b/onionperf/visualization.py @@ -21,8 +21,8 @@ class Visualization(object, metaclass=ABCMeta): self.datasets = [] register_matplotlib_converters() - def add_dataset(self, analysis, label): - self.datasets.append((analysis, label)) + def add_dataset(self, analyses, label): + self.datasets.append((analyses, label)) @abstractmethod def plot_all(self, output_prefix): @@ -51,24 +51,25 @@ class TGenVisualization(Visualization): def __extract_data_frame(self): transfers = [] - for (analysis, label) in self.datasets: - for client in analysis.get_nodes(): - tgen_transfers = analysis.get_tgen_transfers(client) - for transfer_id, transfer_data in tgen_transfers.items(): - transfer = {"transfer_id": transfer_id, "label": label, - "filesize_bytes": transfer_data["filesize_bytes"]} - transfer["server"] = "onion" if ".onion:" in transfer_data["endpoint_remote"] else "public" - if "elapsed_seconds" in transfer_data: - s = transfer_data["elapsed_seconds"] - if "first_byte" in s: - transfer["time_to_first_byte"] = s["first_byte"] - if "last_byte" in s: - transfer["time_to_last_byte"] = s["last_byte"] - if "error_code" in transfer_data and transfer_data["error_code"] != "NONE": - transfer["error_code"] = transfer_data["error_code"] - if "unix_ts_start" in transfer_data: - transfer["start"] = datetime.datetime.utcfromtimestamp(transfer_data["unix_ts_start"]) - transfers.append(transfer) + for (analyses, label) in self.datasets: + for analysis in analyses: + for client in analysis.get_nodes(): + tgen_transfers = analysis.get_tgen_transfers(client) + for transfer_id, transfer_data in tgen_transfers.items(): + transfer = {"transfer_id": transfer_id, "label": label, + "filesize_bytes": transfer_data["filesize_bytes"]} + transfer["server"] = "onion" if ".onion:" in transfer_data["endpoint_remote"] else "public" + if "elapsed_seconds" in transfer_data: + s = transfer_data["elapsed_seconds"] + if "first_byte" in s: + transfer["time_to_first_byte"] = s["first_byte"] + if "last_byte" in s: + transfer["time_to_last_byte"] = s["last_byte"] + if "error_code" in transfer_data and transfer_data["error_code"] != "NONE": + transfer["error_code"] = transfer_data["error_code"] + if "unix_ts_start" in transfer_data: + transfer["start"] = datetime.datetime.utcfromtimestamp(transfer_data["unix_ts_start"]) + transfers.append(transfer) self.data = pd.DataFrame.from_records(transfers, index="transfer_id") def __plot_firstbyte_ecdf(self):

1 0