- tor-commits - lists.torproject.org

r24407: {website} remove translator comments from translated wml files (website/trunk)
by Runa Sandvik 22 Mar '11

22 Mar '11

Author: runa Date: 2011-03-22 12:39:46 +0000 (Tue, 22 Mar 2011) New Revision: 24407 Modified: website/trunk/po2wml.sh Log: remove translator comments from translated wml files Modified: website/trunk/po2wml.sh =================================================================== --- website/trunk/po2wml.sh 2011-03-22 02:48:17 UTC (rev 24406) +++ website/trunk/po2wml.sh 2011-03-22 12:39:46 UTC (rev 24407) @@ -110,6 +110,9 @@ # Remove last three lines in file sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/$wmlfile" + # Remove lines that are translator comments + sed -i '/^<td># Translators:/ d' "$wmldir/$subdir/$wmlfile" + # If the file is mirrors.wml, include mirrors-table.wmi if [ $wmlfile == "mirrors.wml" ] then @@ -167,6 +170,9 @@ # Remove last three lines in file sed -i -e :a -e '$d;N;2,3ba' -e 'P;D' "$wmldir/$subdir/$lang/$wmlfile" + # Remove lines that are translator comments + sed -i '/^<td># Translators:/ d' "$wmldir/$subdir/$lang/$wmlfile" + # If the file is an Arabic translation, include the # right header, css, menu files and footer if [ $lang = "ar" ]

1 0

r24406: {arm} Always starting the bandwidth field from zero rather than us (in arm/trunk: . src/interface/graphing)
by Damian Johnson 22 Mar '11

22 Mar '11

Author: atagar Date: 2011-03-22 02:48:17 +0000 (Tue, 22 Mar 2011) New Revision: 24406 Modified: arm/trunk/armrc.sample arm/trunk/src/interface/graphing/bandwidthStats.py Log: Always starting the bandwidth field from zero rather than using the state file total, which only contains the last day's worth of data (thanks to guilhem) Modified: arm/trunk/armrc.sample =================================================================== --- arm/trunk/armrc.sample 2011-03-22 02:25:04 UTC (rev 24405) +++ arm/trunk/armrc.sample 2011-03-22 02:48:17 UTC (rev 24406) @@ -136,6 +136,9 @@ # prepopulate # attempts to use tor's state file to prepopulate the bandwidth graph at the # 15-minute interval (this requires the minimum of a day's worth of uptime) +# prepopulateTotal +# populates the total stat from the state file if true (this only contains +# the last day's worth of information, so this metric isn't the true total) # transferInBystes # shows rate measurments in bytes if true, bits otherwise # accounting.show @@ -146,6 +149,7 @@ # provides verbose measurements of time if true features.graph.bw.prepopulate true +features.graph.bw.prepopulateTotal false features.graph.bw.transferInBytes false features.graph.bw.accounting.show true features.graph.bw.accounting.rate 10 Modified: arm/trunk/src/interface/graphing/bandwidthStats.py =================================================================== --- arm/trunk/src/interface/graphing/bandwidthStats.py 2011-03-22 02:25:04 UTC (rev 24405) +++ arm/trunk/src/interface/graphing/bandwidthStats.py 2011-03-22 02:48:17 UTC (rev 24406) @@ -20,7 +20,8 @@ PREPOPULATE_SUCCESS_MSG = "Read the last day of bandwidth history from the state file" PREPOPULATE_FAILURE_MSG = "Unable to prepopulate bandwidth information (%s)" -DEFAULT_CONFIG = {"features.graph.bw.transferInBytes": False, +DEFAULT_CONFIG = {"features.graph.bw.prepopulateTotal": False, + "features.graph.bw.transferInBytes": False, "features.graph.bw.accounting.show": True, "features.graph.bw.accounting.rate": 10, "features.graph.bw.accounting.isTimeLong": False, @@ -39,6 +40,11 @@ if config: config.update(self._config, {"features.graph.bw.accounting.rate": 1}) + # stats prepopulated from tor's state file + self.prepopulatePrimaryTotal = 0 + self.prepopulateSecondaryTotal = 0 + self.prepopulateTicks = 0 + # accounting data (set by _updateAccountingInfo method) self.accountingLastUpdated = 0 self.accountingInfo = dict([(arg, "") for arg in ACCOUNTING_ARGS]) @@ -164,10 +170,11 @@ readVal, writeVal = bwReadEntries[i], bwWriteEntries[i] self.lastPrimary, self.lastSecondary = readVal, writeVal - self.primaryTotal += readVal * 900 - self.secondaryTotal += writeVal * 900 - self.tick += 900 + self.prepopulatePrimaryTotal += readVal * 900 + self.prepopulateSecondaryTotal += writeVal * 900 + self.prepopulateTicks += 900 + self.primaryCounts[intervalIndex].insert(0, readVal) self.secondaryCounts[intervalIndex].insert(0, writeVal) @@ -316,10 +323,15 @@ def _getAvgLabel(self, isPrimary): total = self.primaryTotal if isPrimary else self.secondaryTotal - return "avg: %s/sec" % uiTools.getSizeLabel((total / max(1, self.tick)) * 1024, 1, False, self._config["features.graph.bw.transferInBytes"]) + total += self.prepopulatePrimaryTotal if isPrimary else self.prepopulateSecondaryTotal + return "avg: %s/sec" % uiTools.getSizeLabel((total / max(1, self.tick + self.prepopulateTicks)) * 1024, 1, False, self._config["features.graph.bw.transferInBytes"]) def _getTotalLabel(self, isPrimary): total = self.primaryTotal if isPrimary else self.secondaryTotal + + if self._config["features.graph.bw.prepopulateTotal"]: + total += self.prepopulatePrimaryTotal if isPrimary else self.prepopulateSecondaryTotal + return "total: %s" % uiTools.getSizeLabel(total * 1024, 1) def _updateAccountingInfo(self):

1 0

r24405: {arm} Updating TorCtl to the current git version. (in arm/resources: . TorCtl)
by Damian Johnson 22 Mar '11

22 Mar '11

Author: atagar Date: 2011-03-22 02:25:04 +0000 (Tue, 22 Mar 2011) New Revision: 24405 Modified: arm/resources/TorCtl/PathSupport.py arm/resources/TorCtl/TorCtl.py arm/resources/TorCtl/TorUtil.py arm/resources/notes.txt Log: Updating TorCtl to the current git version. Modified: arm/resources/TorCtl/PathSupport.py =================================================================== --- arm/resources/TorCtl/PathSupport.py 2011-03-22 02:18:36 UTC (rev 24404) +++ arm/resources/TorCtl/PathSupport.py 2011-03-22 02:25:04 UTC (rev 24405) @@ -1318,6 +1318,12 @@ port_table = set() _table_lock = threading.Lock() + def __init__(self, family=2, type=1, proto=0, _sock=None): + ret = super(SmartSocket, self).__init__(family, type, proto, _sock) + self.__local_addr = None + plog("DEBUG", "New socket constructor") + return ret + def connect(self, args): ret = super(SmartSocket, self).connect(args) myaddr = self.getsockname() @@ -1341,10 +1347,13 @@ return ret def __del__(self): - SmartSocket._table_lock.acquire() - SmartSocket.port_table.remove(self.__local_addr) - SmartSocket._table_lock.release() - plog("DEBUG", "Removed "+self.__local_addr+" from our local port list") + if self.__local_addr: + SmartSocket._table_lock.acquire() + SmartSocket.port_table.remove(self.__local_addr) + plog("DEBUG", "Removed "+self.__local_addr+" from our local port list") + SmartSocket._table_lock.release() + else: + plog("DEBUG", "Got a socket deletion with no address") def table_size(): SmartSocket._table_lock.acquire() Modified: arm/resources/TorCtl/TorCtl.py =================================================================== --- arm/resources/TorCtl/TorCtl.py 2011-03-22 02:18:36 UTC (rev 24404) +++ arm/resources/TorCtl/TorCtl.py 2011-03-22 02:25:04 UTC (rev 24405) @@ -180,32 +180,33 @@ self.updated = datetime.datetime(*map(int, m.groups())) class Event: - def __init__(self, event_name): + def __init__(self, event_name, body=None): + self.body = body self.event_name = event_name self.arrived_at = 0 self.state = EVENT_STATE.PRISTINE class TimerEvent(Event): - def __init__(self, event_name, type): - Event.__init__(self, event_name) - self.type = type + def __init__(self, event_name, body): + Event.__init__(self, event_name, body) + self.type = body class NetworkStatusEvent(Event): - def __init__(self, event_name, nslist): - Event.__init__(self, event_name) + def __init__(self, event_name, nslist, body): + Event.__init__(self, event_name, body) self.nslist = nslist # List of NetworkStatus objects class NewConsensusEvent(NetworkStatusEvent): pass class NewDescEvent(Event): - def __init__(self, event_name, idlist): - Event.__init__(self, event_name) + def __init__(self, event_name, idlist, body): + Event.__init__(self, event_name, body) self.idlist = idlist class GuardEvent(Event): - def __init__(self, event_name, ev_type, guard, status): - Event.__init__(self, event_name) + def __init__(self, event_name, ev_type, guard, status, body): + Event.__init__(self, event_name, body) if "~" in guard: (self.idhex, self.nick) = guard[1:].split("~") elif "=" in guard: @@ -216,8 +217,8 @@ class BuildTimeoutSetEvent(Event): def __init__(self, event_name, set_type, total_times, timeout_ms, xm, alpha, - quantile): - Event.__init__(self, event_name) + quantile, body): + Event.__init__(self, event_name, body) self.set_type = set_type self.total_times = total_times self.timeout_ms = timeout_ms @@ -227,8 +228,8 @@ class CircuitEvent(Event): def __init__(self, event_name, circ_id, status, path, purpose, - reason, remote_reason): - Event.__init__(self, event_name) + reason, remote_reason, body): + Event.__init__(self, event_name, body) self.circ_id = circ_id self.status = status self.path = path @@ -238,8 +239,9 @@ class StreamEvent(Event): def __init__(self, event_name, strm_id, status, circ_id, target_host, - target_port, reason, remote_reason, source, source_addr, purpose): - Event.__init__(self, event_name) + target_port, reason, remote_reason, source, source_addr, purpose, + body): + Event.__init__(self, event_name, body) self.strm_id = strm_id self.status = status self.circ_id = circ_id @@ -253,8 +255,8 @@ class ORConnEvent(Event): def __init__(self, event_name, status, endpoint, age, read_bytes, - wrote_bytes, reason, ncircs): - Event.__init__(self, event_name) + wrote_bytes, reason, ncircs, body): + Event.__init__(self, event_name, body) self.status = status self.endpoint = endpoint self.age = age @@ -264,21 +266,21 @@ self.ncircs = ncircs class StreamBwEvent(Event): - def __init__(self, event_name, strm_id, written, read): - Event.__init__(self, event_name) + def __init__(self, event_name, saved_body, strm_id, written, read): + Event.__init__(self, event_name, saved_body) self.strm_id = int(strm_id) self.bytes_read = int(read) self.bytes_written = int(written) class LogEvent(Event): def __init__(self, level, msg): - Event.__init__(self, level) + Event.__init__(self, level, msg) self.level = level self.msg = msg class AddrMapEvent(Event): - def __init__(self, event_name, from_addr, to_addr, when): - Event.__init__(self, event_name) + def __init__(self, event_name, from_addr, to_addr, when, body): + Event.__init__(self, event_name, body) self.from_addr = from_addr self.to_addr = to_addr self.when = when @@ -290,14 +292,14 @@ self.when = when class BWEvent(Event): - def __init__(self, event_name, read, written): - Event.__init__(self, event_name) + def __init__(self, event_name, read, written, body): + Event.__init__(self, event_name, body) self.read = read self.written = written class UnknownEvent(Event): def __init__(self, event_name, event_string): - Event.__init__(self, event_name) + Event.__init__(self, event_name, event_string) self.event_string = event_string ipaddress_re = re.compile(r"(\d{1,3}\.){3}\d{1,3}$") @@ -374,6 +376,7 @@ desc_re = { "router": r"(\S+) (\S+)", "opt fingerprint": r"(.+).*on (\S+)", + "opt extra-info-digest": r"(\S+)", "opt hibernating": r"1$", "platform": r"Tor (\S+).*on ([\S\s]+)", "accept": r"(\S+):([^-]+)(?:-(\d+))?", @@ -410,7 +413,9 @@ self.__dict__[i] = copy.deepcopy(args[0].__dict__[i]) return else: - (idhex, name, bw, down, exitpolicy, flags, ip, version, os, uptime, published, contact, rate_limited, orhash, ns_bandwidth) = args + (idhex, name, bw, down, exitpolicy, flags, ip, version, os, uptime, + published, contact, rate_limited, orhash, + ns_bandwidth,extra_info_digest) = args self.idhex = idhex self.nickname = name if ns_bandwidth != None: @@ -432,6 +437,7 @@ self.contact = contact self.rate_limited = rate_limited self.orhash = orhash + self.extra_info_digest = extra_info_digest self._generated = [] # For ExactUniformGenerator def __str__(self): @@ -456,6 +462,7 @@ router = "[none]" published = "never" contact = None + extra_info_digest = None for line in desc: # Pull off the keyword... @@ -504,6 +511,8 @@ published = datetime.datetime(*t[0:6]) elif kw == "contact": contact = g[0] + elif kw == "opt extra-info-digest": + extra_info_digest = g[0] elif kw == "opt hibernating": dead = True if ("Running" in ns.flags): @@ -519,7 +528,7 @@ plog("INFO", "No version and/or OS for router " + ns.nickname) return Router(ns.idhex, ns.nickname, bw_observed, dead, exitpolicy, ns.flags, ip, version, os, uptime, published, contact, rate_limited, - ns.orhash, ns.bandwidth) + ns.orhash, ns.bandwidth, extra_info_digest) build_from_desc = Callable(build_from_desc) def update_to(self, new): @@ -994,7 +1003,7 @@ def set_option(self, key, value): """Set the value of the configuration option 'key' to the value 'value'. """ - self.set_options([(key, value)]) + return self.set_options([(key, value)]) def set_options(self, kvlist): """Given a list of (key,value) pairs, set them as configuration @@ -1003,7 +1012,7 @@ if not kvlist: return msg = " ".join(["%s=\"%s\""%(k,quote(v)) for k,v in kvlist]) - self.sendAndRecv("SETCONF %s\r\n"%msg) + return self.sendAndRecv("SETCONF %s\r\n"%msg) def reset_options(self, keylist): """Reset the options listed in 'keylist' to their default values. @@ -1012,7 +1021,7 @@ previous versions wanted you to set configuration keys to "". That no longer works. """ - self.sendAndRecv("RESETCONF %s\r\n"%(" ".join(keylist))) + return self.sendAndRecv("RESETCONF %s\r\n"%(" ".join(keylist))) def get_consensus(self): """Get the pristine Tor Consensus. Returns a list of @@ -1379,7 +1388,8 @@ if purpose: purpose = purpose[9:] if reason: reason = reason[8:] if remote: remote = remote[15:] - event = CircuitEvent(evtype, ident, status, path, purpose, reason, remote) + event = CircuitEvent(evtype, ident, status, path, purpose, reason, + remote, body) elif evtype == "STREAM": #plog("DEBUG", "STREAM: "+body) m = re.match(r"(\S+)\s+(\S+)\s+(\S+)\s+(\S+)?:(\d+)(\sREASON=\S+)?(\sREMOTE_REASON=\S+)?(\sSOURCE=\S+)?(\sSOURCE_ADDR=\S+)?(\s+PURPOSE=\S+)?", body) @@ -1397,7 +1407,8 @@ purpose = purpose.lstrip() purpose = purpose[8:] event = StreamEvent(evtype, ident, status, circ, target_host, - int(target_port), reason, remote, source, source_addr, purpose) + int(target_port), reason, remote, source, source_addr, + purpose, body) elif evtype == "ORCONN": m = re.match(r"(\S+)\s+(\S+)(\sAGE=\S+)?(\sREAD=\S+)?(\sWRITTEN=\S+)?(\sREASON=\S+)?(\sNCIRCS=\S+)?", body) if not m: @@ -1415,18 +1426,18 @@ if wrote: wrote = int(wrote[9:]) else: wrote = 0 event = ORConnEvent(evtype, status, target, age, read, wrote, - reason, ncircs) + reason, ncircs, body) elif evtype == "STREAM_BW": m = re.match(r"(\d+)\s+(\d+)\s+(\d+)", body) if not m: raise ProtocolError("STREAM_BW event misformatted.") - event = StreamBwEvent(evtype, *m.groups()) + event = StreamBwEvent(evtype, body, *m.groups()) elif evtype == "BW": m = re.match(r"(\d+)\s+(\d+)", body) if not m: raise ProtocolError("BANDWIDTH event misformatted.") read, written = map(long, m.groups()) - event = BWEvent(evtype, read, written) + event = BWEvent(evtype, read, written, body) elif evtype in ("DEBUG", "INFO", "NOTICE", "WARN", "ERR"): event = LogEvent(evtype, body) elif evtype == "NEWDESC": @@ -1434,7 +1445,7 @@ ids = [] for i in ids_verb: ids.append(i.replace("~", "=").split("=")[0].replace("$","")) - event = NewDescEvent(evtype, ids) + event = NewDescEvent(evtype, ids, body) elif evtype == "ADDRMAP": # TODO: Also parse errors and GMTExpiry m = re.match(r'(\S+)\s+(\S+)\s+(\"[^"]+\"|\w+)', body) @@ -1445,11 +1456,11 @@ when = None else: when = time.strptime(when[1:-1], "%Y-%m-%d %H:%M:%S") - event = AddrMapEvent(evtype, fromaddr, toaddr, when) + event = AddrMapEvent(evtype, fromaddr, toaddr, when, body) elif evtype == "NS": - event = NetworkStatusEvent(evtype, parse_ns_body(data)) + event = NetworkStatusEvent(evtype, parse_ns_body(data), data) elif evtype == "NEWCONSENSUS": - event = NewConsensusEvent(evtype, parse_ns_body(data)) + event = NewConsensusEvent(evtype, parse_ns_body(data), data) elif evtype == "BUILDTIMEOUT_SET": m = re.match( r"(\S+)\sTOTAL_TIMES=(\d+)\sTIMEOUT_MS=(\d+)\sXM=(\d+)\sALPHA=(\S+)\sCUTOFF_QUANTILE=(\S+)", @@ -1457,11 +1468,11 @@ set_type, total_times, timeout_ms, xm, alpha, quantile = m.groups() event = BuildTimeoutSetEvent(evtype, set_type, int(total_times), int(timeout_ms), int(xm), float(alpha), - float(quantile)) + float(quantile), body) elif evtype == "GUARD": m = re.match(r"(\S+)\s(\S+)\s(\S+)", body) entry, guard, status = m.groups() - event = GuardEvent(evtype, entry, guard, status) + event = GuardEvent(evtype, entry, guard, status, body) elif evtype == "TORCTL_TIMER": event = TimerEvent(evtype, data) else: Modified: arm/resources/TorCtl/TorUtil.py =================================================================== --- arm/resources/TorCtl/TorUtil.py 2011-03-22 02:18:36 UTC (rev 24404) +++ arm/resources/TorCtl/TorUtil.py 2011-03-22 02:25:04 UTC (rev 24405) @@ -24,7 +24,7 @@ __all__ = ["Enum", "Enum2", "Callable", "sort_list", "quote", "escape_dots", "unescape_dots", "BufSock", "secret_to_key", "urandom_rng", "s2k_gen", "s2k_check", "plog", - "ListenSocket", "zprob", "logfile", "loglevel"] + "ListenSocket", "zprob", "logfile", "loglevel", "loglevels"] # TODO: This isn't the right place for these.. But at least it's unified. tor_port = 9060 @@ -339,7 +339,7 @@ if not logfile: logfile = sys.stdout # HACK: if logfile is a string, assume is it the desired filename. - if type(logfile) is str: + if isinstance(logfile, basestring): f = logging.FileHandler(logfile) f.setFormatter(formatter) logger.addHandler(f) Modified: arm/resources/notes.txt =================================================================== --- arm/resources/notes.txt 2011-03-22 02:18:36 UTC (rev 24404) +++ arm/resources/notes.txt 2011-03-22 02:25:04 UTC (rev 24405) @@ -8,7 +8,7 @@ - dump /release/ChangeLog into /resources/build/debian/changelog TorCtl (dependency) - - Last Updated: 11/18/10 (https://gitweb.torproject.org/pytorctl.git) + Last Updated: 3/21/11 (https://gitweb.torproject.org/pytorctl.git) To update run the following: git clone git://git.torproject.org/pytorctl.git cd pytorctl

1 0

r24404: {arm} Adding a config option for omitting port information from ex (in arm/trunk: . src/interface/connections)
by Damian Johnson 22 Mar '11

22 Mar '11

Author: atagar Date: 2011-03-22 02:18:36 +0000 (Tue, 22 Mar 2011) New Revision: 24404 Modified: arm/trunk/armrc.sample arm/trunk/src/interface/connections/connEntry.py Log: Adding a config option for omitting port information from exit connections. Modified: arm/trunk/armrc.sample =================================================================== --- arm/trunk/armrc.sample 2011-03-21 21:42:20 UTC (rev 24403) +++ arm/trunk/armrc.sample 2011-03-22 02:18:36 UTC (rev 24404) @@ -179,6 +179,7 @@ features.connection.listingType 0 features.connection.order 0, 2, 1 features.connection.refreshRate 10 +features.connection.showExitPort true features.connection.showColumn.fingerprint true features.connection.showColumn.nickname true features.connection.showColumn.destination true Modified: arm/trunk/src/interface/connections/connEntry.py =================================================================== --- arm/trunk/src/interface/connections/connEntry.py 2011-03-21 21:42:20 UTC (rev 24403) +++ arm/trunk/src/interface/connections/connEntry.py 2011-03-22 02:18:36 UTC (rev 24404) @@ -29,7 +29,8 @@ LABEL_FORMAT = "%s --> %s %s%s" LABEL_MIN_PADDING = 2 # min space between listing label and following data -CONFIG = {"features.connection.showColumn.fingerprint": True, +CONFIG = {"features.connection.showExitPort": True, + "features.connection.showColumn.fingerprint": True, "features.connection.showColumn.nickname": True, "features.connection.showColumn.destination": True, "features.connection.showColumn.expandedIp": True} @@ -691,9 +692,12 @@ includeHostname - possibly includes the hostname """ + # the port and port derived data can be hidden by config or without includePort + includePort = self.includePort and (CONFIG["features.connection.showExitPort"] or self.getType() != Category.EXIT) + # destination of the connection ipLabel = "<scrubbed>" if self.isPrivate() else self.foreign.getIpAddr() - portLabel = ":%s" % self.foreign.getPort() if self.includePort else "" + portLabel = ":%s" % self.foreign.getPort() if includePort else "" dstAddress = ipLabel + portLabel # Only append the extra info if there's at least a couple characters of @@ -701,7 +705,7 @@ if len(dstAddress) + 5 <= maxLength: spaceAvailable = maxLength - len(dstAddress) - 3 - if self.getType() == Category.EXIT: + if self.getType() == Category.EXIT and includePort: purpose = connections.getPortUsage(self.foreign.getPort()) if purpose:

1 0

r24403: {website} tor 0.2.2.23-alpha is current. (website/trunk)
by Andrew Lewman 22 Mar '11

22 Mar '11

Author: phobos Date: 2011-03-21 21:42:20 +0000 (Mon, 21 Mar 2011) New Revision: 24403 Modified: website/trunk/Makefile Log: tor 0.2.2.23-alpha is current. Modified: website/trunk/Makefile =================================================================== --- website/trunk/Makefile 2011-03-21 16:39:27 UTC (rev 24402) +++ website/trunk/Makefile 2011-03-21 21:42:20 UTC (rev 24403) @@ -11,8 +11,8 @@ # 5. ./publish export TORGIT=/home/phobos/onionrouter/onionrouter/tor.git/.git -export STABLETAG=tor-0.2.2.22-alpha -export DEVTAG=tor-0.2.2.22-alpha +export STABLETAG=tor-0.2.2.23-alpha +export DEVTAG=tor-0.2.2.23-alpha WMLBASE=. SUBDIRS=docs eff projects press about download getinvolved donate torbutton

1 0

r24402: {arm} Presenting full circuit paths in the connection panel. For a (in arm/trunk: . src/interface/connections src/util)
by Damian Johnson 22 Mar '11

22 Mar '11

Author: atagar Date: 2011-03-21 16:39:27 +0000 (Mon, 21 Mar 2011) New Revision: 24402 Added: arm/trunk/src/interface/connections/clientEntry.py Modified: arm/trunk/armrc.sample arm/trunk/src/interface/connections/connEntry.py arm/trunk/src/interface/connections/connPanel.py arm/trunk/src/util/torTools.py arm/trunk/src/util/uiTools.py Log: Presenting full circuit paths in the connection panel. For a somewhat outdated screenshot of what this includes see 'http://www.atagar.com/transfer/tmp/connPanelWithCircs.png'. Modified: arm/trunk/armrc.sample =================================================================== --- arm/trunk/armrc.sample 2011-03-21 15:14:17 UTC (rev 24401) +++ arm/trunk/armrc.sample 2011-03-21 16:39:27 UTC (rev 24402) @@ -182,7 +182,7 @@ features.connection.showColumn.fingerprint true features.connection.showColumn.nickname true features.connection.showColumn.destination true -features.connection.showColumn.expanedIp true +features.connection.showColumn.expandedIp true # Thread pool size for hostname resolutions # Determines the maximum number of concurrent requests. Upping this to around Added: arm/trunk/src/interface/connections/clientEntry.py =================================================================== --- arm/trunk/src/interface/connections/clientEntry.py (rev 0) +++ arm/trunk/src/interface/connections/clientEntry.py 2011-03-21 16:39:27 UTC (rev 24402) @@ -0,0 +1,215 @@ +""" +Connection panel entries for client circuits. This includes a header entry +followed by an entry for each hop in the circuit. For instance: + +89.188.20.246:42667 --> 217.172.182.26 (de) General / Built 8.6m (CLIENT) +| 85.8.28.4 (se) 98FBC3B2B93897A78CDD797EF549E6B62C9A8523 1 / Guard +| 91.121.204.76 (fr) 546387D93F8D40CFF8842BB9D3A8EC477CEDA984 2 / Middle ++- 217.172.182.26 (de) 5CFA9EA136C0EA0AC096E5CEA7EB674F1207CF86 3 / Exit +""" + +import curses + +from interface.connections import entries, connEntry +from util import torTools, uiTools + +# cached fingerprint -> (IP Address, ORPort) results +RELAY_INFO = {} + +def getRelayInfo(fingerprint): + """ + Provides the (IP Address, ORPort) tuple for the given relay. If the lookup + fails then this returns ("192.168.0.1", "0"). + + Arguments: + fingerprint - relay to look up + """ + + if not fingerprint in RELAY_INFO: + conn = torTools.getConn() + failureResult = ("192.168.0.1", "0") + + nsEntry = conn.getConsensusEntry(fingerprint) + if not nsEntry: return failureResult + + nsLineComp = nsEntry.split("\n")[0].split(" ") + if len(nsLineComp) < 8: return failureResult + + RELAY_INFO[fingerprint] = (nsLineComp[6], nsLineComp[7]) + + return RELAY_INFO[fingerprint] + +class ClientEntry(connEntry.ConnectionEntry): + def __init__(self, circuitID, status, purpose, path): + connEntry.ConnectionEntry.__init__(self, "127.0.0.1", "0", "127.0.0.1", "0") + + self.circuitID = circuitID + self.status = status + + # drops to lowercase except the first letter + if len(purpose) >= 2: + purpose = purpose[0].upper() + purpose[1:].lower() + + self.lines = [ClientHeaderLine(self.circuitID, purpose)] + + # Overwrites attributes of the initial line to make it more fitting as the + # header for our listing. + + self.lines[0].baseType = connEntry.Category.CLIENT + + self.update(status, path) + + def update(self, status, path): + """ + Our status and path can change over time if the circuit is still in the + process of being built. Updates these attributs of our relay. + + Arguments: + status - new status of the circuit + path - list of fingerprints for the series of relays involved in the + circuit + """ + + self.status = status + self.lines = [self.lines[0]] + + if status == "BUILT" and not self.lines[0].isBuilt: + exitIp, exitORPort = getRelayInfo(path[-1]) + self.lines[0].setExit(exitIp, exitORPort, path[-1]) + + for i in range(len(path)): + relayFingerprint = path[i] + relayIp, relayOrPort = getRelayInfo(relayFingerprint) + + if i == len(path) - 1: + if status == "BUILT": placementType = "Exit" + else: placementType = "Extending" + elif i == 0: placementType = "Guard" + else: placementType = "Middle" + + placementLabel = "%i / %s" % (i + 1, placementType) + + self.lines.append(ClientLine(relayIp, relayOrPort, relayFingerprint, placementLabel)) + + self.lines[-1].isLast = True + +class ClientHeaderLine(connEntry.ConnectionLine): + """ + Initial line of a client entry. This has the same basic format as connection + lines except that its etc field has circuit attributes. + """ + + def __init__(self, circuitID, purpose): + connEntry.ConnectionLine.__init__(self, "127.0.0.1", "0", "0.0.0.0", "0", False, False) + self.circuitID = circuitID + self.purpose = purpose + self.isBuilt = False + + def setExit(self, exitIpAddr, exitPort, exitFingerprint): + connEntry.ConnectionLine.__init__(self, "127.0.0.1", "0", exitIpAddr, exitPort, False, False) + self.isBuilt = True + self.foreign.fingerprintOverwrite = exitFingerprint + + def getType(self): + return connEntry.Category.CLIENT + + def getDestinationLabel(self, maxLength, includeLocale=False, includeHostname=False): + if not self.isBuilt: return "Building..." + return connEntry.ConnectionLine.getDestinationLabel(self, maxLength, includeLocale, includeHostname) + + def getEtcContent(self, width, listingType): + """ + Attempts to provide all circuit related stats. Anything that can't be + shown completely (not enough room) is dropped. + """ + + etcAttr = ["Purpose: %s" % self.purpose, "Circuit ID: %i" % self.circuitID] + + for i in range(len(etcAttr), -1, -1): + etcLabel = ", ".join(etcAttr[:i]) + if len(etcLabel) <= width: return etcLabel + + return "" + + def getDetails(self, width): + if not self.isBuilt: + detailFormat = curses.A_BOLD | uiTools.getColor(connEntry.CATEGORY_COLOR[self.getType()]) + return [uiTools.DrawEntry("Building Circuit...", detailFormat)] + else: return connEntry.ConnectionLine.getDetails(self, width) + +class ClientLine(connEntry.ConnectionLine): + """ + An inidividual hop in a circuit. This overwrites the displayed listing, but + otherwise makes use of the ConnectionLine attributes (for the detail display, + caching, etc). + """ + + def __init__(self, fIpAddr, fPort, fFingerprint, placementLabel): + connEntry.ConnectionLine.__init__(self, "127.0.0.1", "0", fIpAddr, fPort) + self.foreign.fingerprintOverwrite = fFingerprint + self.placementLabel = placementLabel + self.includePort = False + + # determines the sort of left hand bracketing we use + self.isLast = False + + def getType(self): + return connEntry.Category.CLIENT + + def getListingEntry(self, width, currentTime, listingType): + """ + Provides the DrawEntry for this relay in the circuilt listing. Lines are + composed of the following components: + <bracket> <dst> <etc> <placement label> + + The dst and etc entries largely match their ConnectionEntry counterparts. + + Arguments: + width - maximum length of the line + currentTime - the current unix time (ignored) + listingType - primary attribute we're listing connections by + """ + + return entries.ConnectionPanelLine.getListingEntry(self, width, currentTime, listingType) + + def _getListingEntry(self, width, currentTime, listingType): + lineFormat = uiTools.getColor(connEntry.CATEGORY_COLOR[self.getType()]) + + # The required widths are the sum of the following: + # bracketing (3 characters) + # placementLabel (14 characters) + # gap between etc and placement label (5 characters) + + if self.isLast: bracket = (curses.ACS_LLCORNER, curses.ACS_HLINE, ord(' ')) + else: bracket = (curses.ACS_VLINE, ord(' '), ord(' ')) + baselineSpace = len(bracket) + 14 + 5 + + dst, etc = "", "" + if listingType == entries.ListingType.IP_ADDRESS: + # TODO: include hostname when that's available + # dst width is derived as: + # src (21) + dst (26) + divider (7) + right gap (2) - bracket (3) = 53 char + dst = "%-53s" % self.getDestinationLabel(53, includeLocale = True) + etc = self.getEtcContent(width - baselineSpace - len(dst), listingType) + elif listingType == entries.ListingType.HOSTNAME: + # min space for the hostname is 40 characters + etc = self.getEtcContent(width - baselineSpace - 40, listingType) + dstLayout = "%%-%is" % (width - baselineSpace - len(etc)) + dst = dstLayout % self.foreign.getHostname(self.foreign.getIpAddr()) + elif listingType == entries.ListingType.FINGERPRINT: + # dst width is derived as: + # src (9) + dst (40) + divider (7) + right gap (2) - bracket (3) = 55 char + dst = "%-55s" % self.foreign.getFingerprint() + etc = self.getEtcContent(width - baselineSpace - len(dst), listingType) + else: + # min space for the nickname is 50 characters + etc = self.getEtcContent(width - baselineSpace - 50, listingType) + dstLayout = "%%-%is" % (width - baselineSpace - len(etc)) + dst = dstLayout % self.foreign.getNickname() + + drawEntry = uiTools.DrawEntry("%-14s" % self.placementLabel, lineFormat) + drawEntry = uiTools.DrawEntry(" " * (width - baselineSpace - len(dst) - len(etc) + 5), lineFormat, drawEntry) + drawEntry = uiTools.DrawEntry(dst + etc, lineFormat, drawEntry) + drawEntry = uiTools.DrawEntry(bracket, curses.A_NORMAL, drawEntry, lockFormat = True) + return drawEntry + Modified: arm/trunk/src/interface/connections/connEntry.py =================================================================== --- arm/trunk/src/interface/connections/connEntry.py 2011-03-21 15:14:17 UTC (rev 24401) +++ arm/trunk/src/interface/connections/connEntry.py 2011-03-21 16:39:27 UTC (rev 24402) @@ -32,7 +32,7 @@ CONFIG = {"features.connection.showColumn.fingerprint": True, "features.connection.showColumn.nickname": True, "features.connection.showColumn.destination": True, - "features.connection.showColumn.expanedIp": True} + "features.connection.showColumn.expandedIp": True} def loadConfig(config): config.update(CONFIG) @@ -51,6 +51,9 @@ # if true, we treat the port as an ORPort when searching for matching # fingerprints (otherwise the ORPort is assumed to be unknown) self.isORPort = False + + # if set then this overwrites fingerprint lookups + self.fingerprintOverwrite = None def getIpAddr(self): """ @@ -88,14 +91,16 @@ return default - def getLocale(self): + def getLocale(self, default=None): """ - Provides the two letter country code for the IP address' locale. This - proivdes None if it can't be determined. + Provides the two letter country code for the IP address' locale. + + Arguments: + default - return value if no locale information is available """ conn = torTools.getConn() - return conn.getInfo("ip-to-country/%s" % self.ipAddr) + return conn.getInfo("ip-to-country/%s" % self.ipAddr, default) def getFingerprint(self): """ @@ -103,6 +108,9 @@ determined. """ + if self.fingerprintOverwrite: + return self.fingerprintOverwrite + conn = torTools.getConn() orPort = self.port if self.isORPort else None myFingerprint = conn.getRelayFingerprint(self.ipAddr, orPort) @@ -157,7 +165,7 @@ return self.lines[0].startTime elif attr == entries.SortAttr.COUNTRY: if connections.isIpAddressPrivate(self.lines[0].foreign.getIpAddr()): return "" - else: return self.lines[0].foreign.getLocale() + else: return self.lines[0].foreign.getLocale("") else: return entries.ConnectionPanelEntry.getSortValue(self, attr, listingType) @@ -166,7 +174,7 @@ Display component of the ConnectionEntry. """ - def __init__(self, lIpAddr, lPort, fIpAddr, fPort): + def __init__(self, lIpAddr, lPort, fIpAddr, fPort, includePort=True, includeExpandedIpAddr=True): entries.ConnectionPanelLine.__init__(self) self.local = Endpoint(lIpAddr, lPort) @@ -206,14 +214,19 @@ self.cachedType = None + # includes the port or expanded ip address field when displaying listing + # information if true + self.includePort = includePort + self.includeExpandedIpAddr = includeExpandedIpAddr + # cached immutable values used for sorting self.sortIpAddr = connections.ipToInt(self.foreign.getIpAddr()) self.sortPort = int(self.foreign.getPort()) def getListingEntry(self, width, currentTime, listingType): """ - Provides the DrawEntry for this connection's listing. The line is made up - of six components: + Provides the DrawEntry for this connection's listing. Lines are composed + of the following components: <src> --> <dst> <etc> <uptime> (<type>) ListingType.IP_ADDRESS: @@ -355,7 +368,7 @@ # a built 1-hop connection since those are most likely a directory # mirror). - for status, _, path in myCircuits: + for _, status, _, path in myCircuits: if path[0] == destFingerprint and (status != "BUILT" or len(path) > 1): self.cachedType = Category.CLIENT # matched a probable guard connection @@ -366,7 +379,7 @@ if self._possibleDirectory: # Checks if we match a built, single hop circuit. - for status, _, path in myCircuits: + for _, status, _, path in myCircuits: if path[0] == destFingerprint and status == "BUILT" and len(path) == 1: self.cachedType = Category.DIRECTORY @@ -379,6 +392,78 @@ return self.cachedType + def getEtcContent(self, width, listingType): + """ + Provides the optional content for the connection. + + Arguments: + width - maximum length of the line + listingType - primary attribute we're listing connections by + """ + + dstAddress = self.getDestinationLabel(26, includeLocale = True) + etc, usedSpace = "", 0 + if listingType == entries.ListingType.IP_ADDRESS: + if width > usedSpace + 42 and CONFIG["features.connection.showColumn.fingerprint"]: + # show fingerprint (column width: 42 characters) + etc += "%-40s " % self.foreign.getFingerprint() + usedSpace += 42 + + if width > usedSpace + 10 and CONFIG["features.connection.showColumn.nickname"]: + # show nickname (column width: remainder) + nicknameSpace = width - usedSpace + nicknameLabel = uiTools.cropStr(self.foreign.getNickname(), nicknameSpace, 0) + etc += ("%%-%is " % nicknameSpace) % nicknameLabel + usedSpace += nicknameSpace + 2 + elif listingType == entries.ListingType.HOSTNAME: + if width > usedSpace + 28 and CONFIG["features.connection.showColumn.destination"]: + # show destination ip/port/locale (column width: 28 characters) + etc += "%-26s " % dstAddress + usedSpace += 28 + + if width > usedSpace + 42 and CONFIG["features.connection.showColumn.fingerprint"]: + # show fingerprint (column width: 42 characters) + etc += "%-40s " % self.foreign.getFingerprint() + usedSpace += 42 + + if width > usedSpace + 17 and CONFIG["features.connection.showColumn.nickname"]: + # show nickname (column width: min 17 characters, uses half of the remainder) + nicknameSpace = 15 + (width - (usedSpace + 17)) / 2 + nicknameLabel = uiTools.cropStr(self.foreign.getNickname(), nicknameSpace, 0) + etc += ("%%-%is " % nicknameSpace) % nicknameLabel + usedSpace += (nicknameSpace + 2) + elif listingType == entries.ListingType.FINGERPRINT: + if width > usedSpace + 17: + # show nickname (column width: min 17 characters, consumes any remaining space) + nicknameSpace = width - usedSpace - 2 + + # if there's room then also show a column with the destination + # ip/port/locale (column width: 28 characters) + isIpLocaleIncluded = width > usedSpace + 45 + isIpLocaleIncluded &= CONFIG["features.connection.showColumn.destination"] + if isIpLocaleIncluded: nicknameSpace -= 28 + + if CONFIG["features.connection.showColumn.nickname"]: + nicknameLabel = uiTools.cropStr(self.foreign.getNickname(), nicknameSpace, 0) + etc += ("%%-%is " % nicknameSpace) % nicknameLabel + usedSpace += nicknameSpace + 2 + + if isIpLocaleIncluded: + etc += "%-26s " % dstAddress + usedSpace += 28 + else: + if width > usedSpace + 42 and CONFIG["features.connection.showColumn.fingerprint"]: + # show fingerprint (column width: 42 characters) + etc += "%-40s " % self.foreign.getFingerprint() + usedSpace += 42 + + if width > usedSpace + 28 and CONFIG["features.connection.showColumn.destination"]: + # show destination ip/port/locale (column width: 28 characters) + etc += "%-26s " % dstAddress + usedSpace += 28 + + return etc + def _getListingContent(self, width, listingType): """ Provides the source, destination, and extra info for our listing. @@ -390,7 +475,7 @@ conn = torTools.getConn() myType = self.getType() - dstAddress = self._getDestinationLabel(26, includeLocale = True) + dstAddress = self.getDestinationLabel(26, includeLocale = True) # The required widths are the sum of the following: # - room for LABEL_FORMAT and LABEL_MIN_PADDING (11 characters) @@ -398,70 +483,55 @@ # - that extra field plus any previous usedSpace = len(LABEL_FORMAT % tuple([""] * 4)) + LABEL_MIN_PADDING + localPort = ":%s" % self.local.getPort() if self.includePort else "" src, dst, etc = "", "", "" if listingType == entries.ListingType.IP_ADDRESS: myExternalIpAddr = conn.getInfo("address", self.local.getIpAddr()) addrDiffer = myExternalIpAddr != self.local.getIpAddr() - srcAddress = "%s:%s" % (myExternalIpAddr, self.local.getPort()) + srcAddress = myExternalIpAddr + localPort src = "%-21s" % srcAddress # ip:port = max of 21 characters dst = "%-26s" % dstAddress # ip:port (xx) = max of 26 characters usedSpace += len(src) + len(dst) # base data requires 47 characters - if width > usedSpace + 42 and CONFIG["features.connection.showColumn.fingerprint"]: - # show fingerprint (column width: 42 characters) - etc += "%-40s " % self.foreign.getFingerprint() - usedSpace += 42 + # Showing the fingerprint (which has the width of 42) has priority over + # an expanded address field. Hence check if we either have space for + # both or wouldn't be showing the fingerprint reguardless. - if addrDiffer and width > usedSpace + 28 and CONFIG["features.connection.showColumn.expanedIp"]: + isExpandedAddrVisible = width > usedSpace + 28 + if isExpandedAddrVisible and CONFIG["features.connection.showColumn.fingerprint"]: + isExpandedAddrVisible = width < usedSpace + 42 or width > usedSpace + 70 + + if addrDiffer and isExpandedAddrVisible and self.includeExpandedIpAddr and CONFIG["features.connection.showColumn.expandedIp"]: # include the internal address in the src (extra 28 characters) - internalAddress = "%s:%s" % (self.local.getIpAddr(), self.local.getPort()) + internalAddress = self.local.getIpAddr() + localPort src = "%-21s --> %s" % (internalAddress, src) usedSpace += 28 - if width > usedSpace + 10 and CONFIG["features.connection.showColumn.nickname"]: - # show nickname (column width: remainder) - nicknameSpace = width - usedSpace - nicknameLabel = uiTools.cropStr(self.foreign.getNickname(), nicknameSpace, 0) - etc += ("%%-%is " % nicknameSpace) % nicknameLabel - usedSpace += nicknameSpace + 2 + etc = self.getEtcContent(width - usedSpace, listingType) + usedSpace += len(etc) elif listingType == entries.ListingType.HOSTNAME: # 15 characters for source, and a min of 40 reserved for the destination - src = "localhost:%-5s" % self.local.getPort() + src = "localhost%-6s" % localPort usedSpace += len(src) minHostnameSpace = 40 - if width > usedSpace + minHostnameSpace + 28 and CONFIG["features.connection.showColumn.destination"]: - # show destination ip/port/locale (column width: 28 characters) - etc += "%-26s " % dstAddress - usedSpace += 28 + etc = self.getEtcContent(width - usedSpace - minHostnameSpace, listingType) + usedSpace += len(etc) - if width > usedSpace + minHostnameSpace + 42 and CONFIG["features.connection.showColumn.fingerprint"]: - # show fingerprint (column width: 42 characters) - etc += "%-40s " % self.foreign.getFingerprint() - usedSpace += 42 - - if width > usedSpace + minHostnameSpace + 17 and CONFIG["features.connection.showColumn.nickname"]: - # show nickname (column width: min 17 characters, uses half of the remainder) - nicknameSpace = 15 + (width - (usedSpace + minHostnameSpace + 17)) / 2 - nicknameLabel = uiTools.cropStr(self.foreign.getNickname(), nicknameSpace, 0) - etc += ("%%-%is " % nicknameSpace) % nicknameLabel - usedSpace += (nicknameSpace + 2) - hostnameSpace = width - usedSpace usedSpace = width # prevents padding at the end if self.isPrivate(): dst = ("%%-%is" % hostnameSpace) % "<scrubbed>" else: hostname = self.foreign.getHostname(self.foreign.getIpAddr()) - port = self.foreign.getPort() + portLabel = ":%-5s" % self.foreign.getPort() if self.includePort else "" # truncates long hostnames and sets dst to <hostname>:<port> hostname = uiTools.cropStr(hostname, hostnameSpace, 0) - dst = "%s:%-5s" % (hostname, port) - dst = ("%%-%is" % hostnameSpace) % dst + dst = ("%%-%is" % hostnameSpace) % (hostname + portLabel) elif listingType == entries.ListingType.FINGERPRINT: src = "localhost" if myType == Category.CONTROL: dst = "localhost" @@ -470,25 +540,8 @@ usedSpace += len(src) + len(dst) # base data requires 49 characters - if width > usedSpace + 17: - # show nickname (column width: min 17 characters, consumes any remaining space) - nicknameSpace = width - usedSpace - - # if there's room then also show a column with the destination - # ip/port/locale (column width: 28 characters) - isIpLocaleIncluded = width > usedSpace + 45 - isIpLocaleIncluded &= CONFIG["features.connection.showColumn.destination"] - if isIpLocaleIncluded: nicknameSpace -= 28 - - if CONFIG["features.connection.showColumn.nickname"]: - nicknameSpace = width - usedSpace - 28 if isIpLocaleIncluded else width - usedSpace - nicknameLabel = uiTools.cropStr(self.foreign.getNickname(), nicknameSpace, 0) - etc += ("%%-%is " % nicknameSpace) % nicknameLabel - usedSpace += nicknameSpace + 2 - - if isIpLocaleIncluded: - etc += "%-26s " % dstAddress - usedSpace += 28 + etc = self.getEtcContent(width - usedSpace, listingType) + usedSpace += len(etc) else: # base data requires 50 min characters src = self.local.getNickname() @@ -496,16 +549,9 @@ else: dst = self.foreign.getNickname() minBaseSpace = 50 - if width > usedSpace + minBaseSpace + 42 and CONFIG["features.connection.showColumn.fingerprint"]: - # show fingerprint (column width: 42 characters) - etc += "%-40s " % self.foreign.getFingerprint() - usedSpace += 42 + etc = self.getEtcContent(width - usedSpace - minBaseSpace, listingType) + usedSpace += len(etc) - if width > usedSpace + minBaseSpace + 28 and CONFIG["features.connection.showColumn.destination"]: - # show destination ip/port/locale (column width: 28 characters) - etc += "%-26s " % dstAddress - usedSpace += 28 - baseSpace = width - usedSpace usedSpace = width # prevents padding at the end @@ -529,8 +575,8 @@ """ lines = [""] * 7 - lines[0] = "address: %s" % self._getDestinationLabel(width - 11) - lines[1] = "locale: %s" % ("??" if self.isPrivate() else self.foreign.getLocale()) + lines[0] = "address: %s" % self.getDestinationLabel(width - 11) + lines[1] = "locale: %s" % ("??" if self.isPrivate() else self.foreign.getLocale("??")) # Remaining data concerns the consensus results, with three possible cases: # - if there's a single match then display its details @@ -627,7 +673,7 @@ return lines - def _getDestinationLabel(self, maxLength, includeLocale=False, includeHostname=False): + def getDestinationLabel(self, maxLength, includeLocale=False, includeHostname=False): """ Provides a short description of the destination. This is made up of two components, the base <ip addr>:<port> and an extra piece of information in @@ -646,10 +692,9 @@ """ # destination of the connection - if self.isPrivate(): - dstAddress = "<scrubbed>:%s" % self.foreign.getPort() - else: - dstAddress = "%s:%s" % (self.foreign.getIpAddr(), self.foreign.getPort()) + ipLabel = "<scrubbed>" if self.isPrivate() else self.foreign.getIpAddr() + portLabel = ":%s" % self.foreign.getPort() if self.includePort else "" + dstAddress = ipLabel + portLabel # Only append the extra info if there's at least a couple characters of # space (this is what's needed for the country codes). @@ -673,7 +718,7 @@ extraInfo = [] if includeLocale: - foreignLocale = self.foreign.getLocale() + foreignLocale = self.foreign.getLocale("??") extraInfo.append(foreignLocale) spaceAvailable -= len(foreignLocale) + 2 Modified: arm/trunk/src/interface/connections/connPanel.py =================================================================== --- arm/trunk/src/interface/connections/connPanel.py 2011-03-21 15:14:17 UTC (rev 24401) +++ arm/trunk/src/interface/connections/connPanel.py 2011-03-21 16:39:27 UTC (rev 24402) @@ -6,8 +6,8 @@ import curses import threading -from interface.connections import entries, connEntry -from util import connections, enum, panel, uiTools +from interface.connections import entries, connEntry, clientEntry +from util import connections, enum, panel, torTools, uiTools DEFAULT_CONFIG = {"features.connection.listingType": 0, "features.connection.refreshRate": 10} @@ -48,8 +48,8 @@ self._listingType = Listing.values()[self._config["features.connection.listingType"]] self._scroller = uiTools.Scroller(True) self._title = "Connections:" # title line of the panel - self._connections = [] # last fetched connections - self._connectionLines = [] # individual lines in the connection listing + self._entries = [] # last fetched display entries + self._entryLines = [] # individual lines rendered from the entries listing self._showDetails = False # presents the details panel if true self._lastUpdate = -1 # time the content was last revised @@ -95,11 +95,11 @@ self.valsLock.acquire() if ordering: self._sortOrdering = ordering - self._connections.sort(key=lambda i: (i.getSortValues(self._sortOrdering, self._listingType))) + self._entries.sort(key=lambda i: (i.getSortValues(self._sortOrdering, self._listingType))) - self._connectionLines = [] - for entry in self._connections: - self._connectionLines += entry.getLines() + self._entryLines = [] + for entry in self._entries: + self._entryLines += entry.getLines() self.valsLock.release() def setListingType(self, listingType): @@ -125,7 +125,7 @@ if uiTools.isScrollKey(key): pageHeight = self.getPreferredSize()[0] - 1 if self._showDetails: pageHeight -= (DETAILS_HEIGHT + 1) - isChanged = self._scroller.handleKey(key, self._connectionLines, pageHeight) + isChanged = self._scroller.handleKey(key, self._entryLines, pageHeight) if isChanged: self.redraw(True) elif uiTools.isSelectionKey(key): self._showDetails = not self._showDetails @@ -157,10 +157,10 @@ # extra line when showing the detail panel is for the bottom border detailPanelOffset = DETAILS_HEIGHT + 1 if self._showDetails else 0 - isScrollbarVisible = len(self._connectionLines) > height - detailPanelOffset - 1 + isScrollbarVisible = len(self._entryLines) > height - detailPanelOffset - 1 - scrollLoc = self._scroller.getScrollLoc(self._connectionLines, height - detailPanelOffset - 1) - cursorSelection = self._scroller.getCursorSelection(self._connectionLines) + scrollLoc = self._scroller.getScrollLoc(self._entryLines, height - detailPanelOffset - 1) + cursorSelection = self._scroller.getCursorSelection(self._entryLines) # draws the detail panel if currently displaying it if self._showDetails: @@ -177,14 +177,14 @@ title = "Connection Details:" if self._showDetails else self._title self.addstr(0, 0, title, curses.A_STANDOUT) - scrollOffset = 0 + scrollOffset = 1 if isScrollbarVisible: scrollOffset = 3 - self.addScrollBar(scrollLoc, scrollLoc + height - detailPanelOffset - 1, len(self._connectionLines), 1 + detailPanelOffset) + self.addScrollBar(scrollLoc, scrollLoc + height - detailPanelOffset - 1, len(self._entryLines), 1 + detailPanelOffset) currentTime = self._pauseTime if self._pauseTime else time.time() - for lineNum in range(scrollLoc, len(self._connectionLines)): - entryLine = self._connectionLines[lineNum] + for lineNum in range(scrollLoc, len(self._entryLines)): + entryLine = self._entryLines[lineNum] # hilighting if this is the selected line extraFormat = curses.A_STANDOUT if entryLine == cursorSelection else curses.A_NORMAL @@ -216,41 +216,68 @@ if self._lastResourceFetch != currentResolutionCount: self.valsLock.acquire() - currentConnections = connResolver.getConnections() - # Replacement listing of connections. We first populate it with any of - # our old entries in currentConnections, then add new ConnectionEntries - # for whatever remains. - newConnections = [] + newEntries = [] # the new results we'll display - # preserves any ConnectionEntries they already exist - for entry in self._connections: - if isinstance(entry, connEntry.ConnectionEntry): - connLine = entry.getLines()[0] + # Fetches new connections and client circuits... + # newConnections [(local ip, local port, foreign ip, foreign port)...] + # newCircuits {circuitID => (status, purpose, path)...} + + newConnections = connResolver.getConnections() + newCircuits = {} + + for circuitID, status, purpose, path in torTools.getConn().getCircuits(): + # Skips established single-hop circuits (these are for directory + # fetches, not client circuits) + if not (status == "BUILT" and len(path) == 1): + newCircuits[circuitID] = (status, purpose, path) + + # Populates newEntries with any of our old entries that still exist. + # This is both for performance and to keep from resetting the uptime + # attributes. Note that ClientEntries are a ConnectionEntry subclass so + # we need to check for them first. + + for oldEntry in self._entries: + if isinstance(oldEntry, clientEntry.ClientEntry): + newEntry = newCircuits.get(oldEntry.circuitID) + + if newEntry: + oldEntry.update(newEntry[0], newEntry[2]) + newEntries.append(oldEntry) + del newCircuits[oldEntry.circuitID] + elif isinstance(oldEntry, connEntry.ConnectionEntry): + connLine = oldEntry.getLines()[0] connAttr = (connLine.local.getIpAddr(), connLine.local.getPort(), connLine.foreign.getIpAddr(), connLine.foreign.getPort()) - if connAttr in currentConnections: - newConnections.append(entry) - currentConnections.remove(connAttr) + if connAttr in newConnections: + newEntries.append(oldEntry) + newConnections.remove(connAttr) - # reset any display attributes for the entries we're keeping - for entry in newConnections: - entry.resetDisplay() + # Reset any display attributes for the entries we're keeping + for entry in newEntries: entry.resetDisplay() - # add new entries for any additions - for lIp, lPort, fIp, fPort in currentConnections: - newConnections.append(connEntry.ConnectionEntry(lIp, lPort, fIp, fPort)) + # Adds any new connection and circuit entries. + for lIp, lPort, fIp, fPort in newConnections: + newConnEntry = connEntry.ConnectionEntry(lIp, lPort, fIp, fPort) + if newConnEntry.getLines()[0].getType() != connEntry.Category.CLIENT: + newEntries.append(newConnEntry) + for circuitID in newCircuits: + status, purpose, path = newCircuits[circuitID] + newEntries.append(clientEntry.ClientEntry(circuitID, status, purpose, path)) + # Counts the relays in each of the categories. This also flushes the # type cache for all of the connections (in case its changed since last # fetched). categoryTypes = connEntry.Category.values() typeCounts = dict((type, 0) for type in categoryTypes) - for entry in newConnections: + for entry in newEntries: if isinstance(entry, connEntry.ConnectionEntry): typeCounts[entry.getLines()[0].getType()] += 1 + elif isinstance(entry, clientEntry.ClientEntry): + typeCounts[connEntry.Category.CLIENT] += 1 # makes labels for all the categories with connections (ie, # "21 outbound", "1 control", etc) @@ -263,11 +290,11 @@ if countLabels: self._title = "Connections (%s):" % ", ".join(countLabels) else: self._title = "Connections:" - self._connections = newConnections + self._entries = newEntries - self._connectionLines = [] - for entry in self._connections: - self._connectionLines += entry.getLines() + self._entryLines = [] + for entry in self._entries: + self._entryLines += entry.getLines() self.setSortOrder() self._lastResourceFetch = currentResolutionCount Modified: arm/trunk/src/util/torTools.py =================================================================== --- arm/trunk/src/util/torTools.py 2011-03-21 15:14:17 UTC (rev 24401) +++ arm/trunk/src/util/torTools.py 2011-03-21 16:39:27 UTC (rev 24402) @@ -606,7 +606,7 @@ def getCircuits(self, default = []): """ This provides a list with tuples of the form: - (status, purpose, (fingerprint1, fingerprint2...)) + (circuitID, status, purpose, (fingerprint1, fingerprint2...)) Arguments: default - value provided back if unable to query the circuit-status @@ -1394,15 +1394,9 @@ for line in orconnResults.split("\n"): self._fingerprintsAttachedCache.append(line[1:line.find("=")]) - # circuit-status has entries of the form: - # 7 BUILT $33173252B70A50FE3928C7453077936D71E45C52=shiven,... - circStatusResults = self.getInfo("circuit-status") - if circStatusResults: - for line in circStatusResults.split("\n"): - clientEntries = line.split(" ")[2].split(",") - - for entry in clientEntries: - self._fingerprintsAttachedCache.append(entry[1:entry.find("=")]) + # circuit-status results (we only make connections to the first hop) + for _, _, _, path in self.getCircuits(): + self._fingerprintsAttachedCache.append(path[0]) # narrow to only relays we have a connection to attachedMatches = [] @@ -1608,7 +1602,7 @@ if len(lineComp) < 4: continue path = tuple([hopEntry[1:41] for hopEntry in lineComp[2].split(",")]) - result.append((lineComp[1], lineComp[3], path)) + result.append((int(lineComp[0]), lineComp[1], lineComp[3][8:], path)) # cache value if result != None: self._cachedParam[key] = result Modified: arm/trunk/src/util/uiTools.py =================================================================== --- arm/trunk/src/util/uiTools.py 2011-03-21 15:14:17 UTC (rev 24401) +++ arm/trunk/src/util/uiTools.py 2011-03-21 16:39:27 UTC (rev 24402) @@ -415,10 +415,23 @@ chained together to compose lines with multiple types of formatting. """ - def __init__(self, text, format=curses.A_NORMAL, nextEntry=None): + def __init__(self, text, format=curses.A_NORMAL, nextEntry=None, lockFormat=False): + """ + Constructor for prepared draw entries. + + Arguments: + text - content to be drawn, this can either be a string or list of + integer character codes + format - properties to apply when drawing + nextEntry - entry to be drawn after this one + lockFormat - prevents extra formatting attributes from being applied + when rendered if true + """ + self.text = text self.format = format self.nextEntry = nextEntry + self.lockFormat = lockFormat def getNext(self): """ @@ -449,9 +462,16 @@ extraFormat - additional formatting """ - drawFormat = self.format | extraFormat - drawPanel.addstr(y, x, self.text, drawFormat) + if self.lockFormat: drawFormat = self.format + else: drawFormat = self.format | extraFormat + if isinstance(self.text, str): + drawPanel.addstr(y, x, self.text, drawFormat) + else: + for i in range(len(self.text)): + drawChar = self.text[i] + drawPanel.addch(y, x + i, drawChar, drawFormat) + # if there's additional content to show then render it too if self.nextEntry: self.nextEntry.render(drawPanel, y, x + len(self.text), extraFormat)

1 0

[torspec/master] Fix up a dangling sentence and a dangling idea
by nickm＠torproject.org 22 Mar '11

22 Mar '11

commit eda9c36984f2969c971746e482549da79d3e4da8 Author: Nick Mathewson <nickm(a)torproject.org> Date: Mon Mar 21 12:14:05 2011 -0400 Fix up a dangling sentence and a dangling idea --- proposals/180-pluggable-transport.txt | 25 ++++++++++++++----------- 1 files changed, 14 insertions(+), 11 deletions(-) diff --git a/proposals/180-pluggable-transport.txt b/proposals/180-pluggable-transport.txt index 2df0ced..dc0564d 100644 --- a/proposals/180-pluggable-transport.txt +++ b/proposals/180-pluggable-transport.txt @@ -127,7 +127,7 @@ Design overview list it in your torrc. The program tells Tor which transports it provides. The Tor consensus should carry a new approved version number that is specific for pluggable transport; this will allow Tor to know when a - particular transport is known to be unsafe safe or non-functional. + particular transport is known to be unsafe, safe, or non-functional. Bridges (and maybe relays) report in their descriptors which transport protocols they support. This information can be copied into bridge @@ -260,7 +260,8 @@ Managed proxy interface will give a comma-separated list. Clients MUST accept comma-separated lists containing any version that they recognize, and MUST work correctly even if some of the - versions they don't recognize are non-numeric. + versions they don't recognize are non-numeric. Valid version + characters are non-space, non-comma printing ASCII characters. {Client only} @@ -440,7 +441,9 @@ Bridge authority behavior We need to specify a way to test different transport methods that bridges claim to support. We should test as many as possible. We - should NOT require that we have a way to tra + should NOT require that we have a way to test every possible + transport method before we allow its use: the point of this design + is to remove bottlenecks in transport deployment. Bridgedb behavior: @@ -451,15 +454,15 @@ Bridgedb behavior: Implementation plan - First, we should implement per-bridge socks settings (as - described above in "manually configuring a client proxy for a - bridge") and the extended-server-port mechanism. This will let - bridges run transport proxies such that they can hand-generate - bridge lines to give to clients for testing. + First, we should implement per-bridge proxies via the "external + proxy" method described in "Specifications: Client behavior". the + extended-server-port mechanism. This will let bridges run + transport proxies such that they can give bridge lines to + give to clients for testing, so long as the user configures and + launches their proxies on their own. - Once that's done, we can improve usability a little bit by - implementing external proxies. Once that's done, we can see if we - need any managed proxies, or if the whole idea there is silly. + Once that's done, we can see if we need any managed proxies, or if + the whole idea there is silly. If we do, the next most important part seems to be getting the client-side automatic part written. And once that's done, we

1 0

r24401: {arm} Forgot to bump the dev version after the last release. (arm/trunk/src)
by Damian Johnson 22 Mar '11

22 Mar '11

Author: atagar Date: 2011-03-21 15:14:17 +0000 (Mon, 21 Mar 2011) New Revision: 24401 Modified: arm/trunk/src/version.py Log: Forgot to bump the dev version after the last release. Modified: arm/trunk/src/version.py =================================================================== --- arm/trunk/src/version.py 2011-03-21 10:50:04 UTC (rev 24400) +++ arm/trunk/src/version.py 2011-03-21 15:14:17 UTC (rev 24401) @@ -2,6 +2,6 @@ Provides arm's version and release date. """ -VERSION = '1.4.1_dev' +VERSION = '1.4.2_dev' LAST_MODIFIED = "January 7, 2011"

1 0

r24400: {website} Update torbutton version and update.rdf. (in website/trunk: include torbutton)
by Mike Perry 21 Mar '11

21 Mar '11

Author: mikeperry Date: 2011-03-21 10:50:04 +0000 (Mon, 21 Mar 2011) New Revision: 24400 Modified: website/trunk/include/versions.wmi website/trunk/torbutton/update.rdf Log: Update torbutton version and update.rdf. Modified: website/trunk/include/versions.wmi =================================================================== --- website/trunk/include/versions.wmi 2011-03-21 09:52:09 UTC (rev 24399) +++ website/trunk/include/versions.wmi 2011-03-21 10:50:04 UTC (rev 24400) @@ -83,5 +83,5 @@ <define-tag version-torbutton whitespace=delete>1.2.5 (08 April 2010)</define-tag> <define-tag version-hash-torbutton whitespace=delete>sha1:e84592877593ad6119e829ac7199fd19333e101e</define-tag> -<define-tag version-torbutton-alpha whitespace=delete>1.3.1-alpha (4 January 2011)</define-tag> -<define-tag version-hash-torbutton-alpha whitespace=delete>sha1:df3d68ed05afc4297778ecaa2e3c7f4924b22bb2</define-tag> +<define-tag version-torbutton-alpha whitespace=delete>1.3.2-alpha (21 March 2011)</define-tag> +<define-tag version-hash-torbutton-alpha whitespace=delete>sha1:4231cf0e568fe61f49011d4626e85cdb467c6a48</define-tag> Modified: website/trunk/torbutton/update.rdf =================================================================== (Binary files differ)

1 0

[torbutton/master] And I still can't get the year right.
by mikeperry＠torproject.org 21 Mar '11

21 Mar '11

commit de27a96413c3f2199ace89ee9e2d7c392fed4a20 Author: Mike Perry <mikeperry-git(a)fscked.org> Date: Mon Mar 21 03:26:13 2011 -0700 And I still can't get the year right. --- src/CHANGELOG | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/CHANGELOG b/src/CHANGELOG index cc7f986..a5a3af9 100644 --- a/src/CHANGELOG +++ b/src/CHANGELOG @@ -1,5 +1,5 @@ 1.3.2-alpha - 21 Mar 2010 + 21 Mar 2011 * bug 1624: Use nsIDOMCrypto::logout() instead of the SSLv2 pref hack * bug 1999: Disable tor:// urls by default * bug 1968: Reset window.name on tor toggle @@ -13,7 +13,7 @@ * misc: Remove a noisy FF2 nsICookieManager2 fallback check. 1.3.1-alpha - 03 Jan 2010 + 03 Jan 2011 * bugfix: bug 1894: Amnesia is now called TAILS (patch from intrigeri) * bugfix: bug 2315: Remove reference to TorVM (patch from intrigeri) * bugfix: bug 2011: Fix preference dialog issues (patch from chrisdoble)

1 0