commit 86c121053f54bac74b8c08ad6901cfdad5d11aaf
Author: Translation commit bot <translation(a)torproject.org>
Date: Mon Sep 16 19:11:41 2013 +0000
Update translations for liveusb-creator
---
ak/ak.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
am/am.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
arn/arn.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
be/be.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
bn/bn.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
bo/bo.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
br/br.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
csb/csb.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
dz/dz.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
fo/fo.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
fur/fur.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
fy/fy.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ga/ga.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
gun/gun.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ha/ha.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ht/ht.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
hy/hy.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
jv/jv.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
km/km.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
kw/kw.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
lb/lb.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
lg/lg.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ln/ln.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
lo/lo.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
mg/mg.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
mi/mi.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ml/ml.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
mn/mn.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
mt/mt.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
nah/nah.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
nap/nap.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ne/ne.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
nn/nn.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
nso/nso.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
oc/oc.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
or/or.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
pap/pap.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
pms/pms.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ps/ps.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ru@petr1708/ru@petr1708.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
so/so.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
son/son.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
st/st.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
su/su.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
te/te.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
tg/tg.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ti/ti.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
tk/tk.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ur/ur.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
ve/ve.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
wa/wa.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
wo/wo.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
zh_HK/zh_HK.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
zu/zu.po | 565 ++++++++++++++++++++++++++++++++++++++++++++
54 files changed, 30510 insertions(+)
diff --git a/ak/ak.po b/ak/ak.po
new file mode 100644
index 0000000..fa1eff4
--- /dev/null
+++ b/ak/ak.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ak\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/am/am.po b/am/am.po
new file mode 100644
index 0000000..f936383
--- /dev/null
+++ b/am/am.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: am\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/arn/arn.po b/arn/arn.po
new file mode 100644
index 0000000..f1e6f88
--- /dev/null
+++ b/arn/arn.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: arn\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/be/be.po b/be/be.po
new file mode 100644
index 0000000..b322a10
--- /dev/null
+++ b/be/be.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: be\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/bn/bn.po b/bn/bn.po
new file mode 100644
index 0000000..711ad03
--- /dev/null
+++ b/bn/bn.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: bn\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/bo/bo.po b/bo/bo.po
new file mode 100644
index 0000000..f4019ea
--- /dev/null
+++ b/bo/bo.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: bo\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/br/br.po b/br/br.po
new file mode 100644
index 0000000..68eeac5
--- /dev/null
+++ b/br/br.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: br\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/csb/csb.po b/csb/csb.po
new file mode 100644
index 0000000..30b66da
--- /dev/null
+++ b/csb/csb.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: csb\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/dz/dz.po b/dz/dz.po
new file mode 100644
index 0000000..bc4f5ee
--- /dev/null
+++ b/dz/dz.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: dz\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/fo/fo.po b/fo/fo.po
new file mode 100644
index 0000000..8785449
--- /dev/null
+++ b/fo/fo.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: fo\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/fur/fur.po b/fur/fur.po
new file mode 100644
index 0000000..e2a1ac0
--- /dev/null
+++ b/fur/fur.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: fur\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/fy/fy.po b/fy/fy.po
new file mode 100644
index 0000000..551dec7
--- /dev/null
+++ b/fy/fy.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: fy\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ga/ga.po b/ga/ga.po
new file mode 100644
index 0000000..95676e8
--- /dev/null
+++ b/ga/ga.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ga\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/gun/gun.po b/gun/gun.po
new file mode 100644
index 0000000..7e1609b
--- /dev/null
+++ b/gun/gun.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: gun\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ha/ha.po b/ha/ha.po
new file mode 100644
index 0000000..41e4d51
--- /dev/null
+++ b/ha/ha.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ha\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ht/ht.po b/ht/ht.po
new file mode 100644
index 0000000..6cee799
--- /dev/null
+++ b/ht/ht.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ht\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/hy/hy.po b/hy/hy.po
new file mode 100644
index 0000000..7684887
--- /dev/null
+++ b/hy/hy.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: hy\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/jv/jv.po b/jv/jv.po
new file mode 100644
index 0000000..5782ace
--- /dev/null
+++ b/jv/jv.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: jv\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/km/km.po b/km/km.po
new file mode 100644
index 0000000..c740d6d
--- /dev/null
+++ b/km/km.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: km\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/kw/kw.po b/kw/kw.po
new file mode 100644
index 0000000..5e73201
--- /dev/null
+++ b/kw/kw.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: kw\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/lb/lb.po b/lb/lb.po
new file mode 100644
index 0000000..bf595f7
--- /dev/null
+++ b/lb/lb.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lb\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/lg/lg.po b/lg/lg.po
new file mode 100644
index 0000000..161418e
--- /dev/null
+++ b/lg/lg.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ln/ln.po b/ln/ln.po
new file mode 100644
index 0000000..d22075f
--- /dev/null
+++ b/ln/ln.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ln\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/lo/lo.po b/lo/lo.po
new file mode 100644
index 0000000..6f7d94a
--- /dev/null
+++ b/lo/lo.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lo\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/mg/mg.po b/mg/mg.po
new file mode 100644
index 0000000..5a68012
--- /dev/null
+++ b/mg/mg.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: mg\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/mi/mi.po b/mi/mi.po
new file mode 100644
index 0000000..bdf03ea
--- /dev/null
+++ b/mi/mi.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: mi\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ml/ml.po b/ml/ml.po
new file mode 100644
index 0000000..ba83061
--- /dev/null
+++ b/ml/ml.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ml\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/mn/mn.po b/mn/mn.po
new file mode 100644
index 0000000..97d23dd
--- /dev/null
+++ b/mn/mn.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: mn\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/mt/mt.po b/mt/mt.po
new file mode 100644
index 0000000..37e1017
--- /dev/null
+++ b/mt/mt.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: mt\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/nah/nah.po b/nah/nah.po
new file mode 100644
index 0000000..f86f771
--- /dev/null
+++ b/nah/nah.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: nah\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/nap/nap.po b/nap/nap.po
new file mode 100644
index 0000000..0f18a02
--- /dev/null
+++ b/nap/nap.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: nap\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ne/ne.po b/ne/ne.po
new file mode 100644
index 0000000..30e5f2b
--- /dev/null
+++ b/ne/ne.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ne\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/nn/nn.po b/nn/nn.po
new file mode 100644
index 0000000..718a07f
--- /dev/null
+++ b/nn/nn.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: nn\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/nso/nso.po b/nso/nso.po
new file mode 100644
index 0000000..3a18308
--- /dev/null
+++ b/nso/nso.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: nso\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/oc/oc.po b/oc/oc.po
new file mode 100644
index 0000000..7f3d442
--- /dev/null
+++ b/oc/oc.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: oc\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/or/or.po b/or/or.po
new file mode 100644
index 0000000..99972c0
--- /dev/null
+++ b/or/or.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: or\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/pap/pap.po b/pap/pap.po
new file mode 100644
index 0000000..5c50d39
--- /dev/null
+++ b/pap/pap.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: pap\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/pms/pms.po b/pms/pms.po
new file mode 100644
index 0000000..ff4a461
--- /dev/null
+++ b/pms/pms.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: pms\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ps/ps.po b/ps/ps.po
new file mode 100644
index 0000000..1581ed7
--- /dev/null
+++ b/ps/ps.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ps\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ru@petr1708/ru@petr1708.po b/ru@petr1708/ru@petr1708.po
new file mode 100644
index 0000000..31b168f
--- /dev/null
+++ b/ru@petr1708/ru@petr1708.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/so/so.po b/so/so.po
new file mode 100644
index 0000000..245519b
--- /dev/null
+++ b/so/so.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: so\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/son/son.po b/son/son.po
new file mode 100644
index 0000000..b5837be
--- /dev/null
+++ b/son/son.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: son\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/st/st.po b/st/st.po
new file mode 100644
index 0000000..ed2dee5
--- /dev/null
+++ b/st/st.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: st\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/su/su.po b/su/su.po
new file mode 100644
index 0000000..d346354
--- /dev/null
+++ b/su/su.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: su\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/te/te.po b/te/te.po
new file mode 100644
index 0000000..62ff29f
--- /dev/null
+++ b/te/te.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: te\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/tg/tg.po b/tg/tg.po
new file mode 100644
index 0000000..1cf2b7b
--- /dev/null
+++ b/tg/tg.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: tg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ti/ti.po b/ti/ti.po
new file mode 100644
index 0000000..828aceb
--- /dev/null
+++ b/ti/ti.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ti\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/tk/tk.po b/tk/tk.po
new file mode 100644
index 0000000..e9d5350
--- /dev/null
+++ b/tk/tk.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: tk\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ur/ur.po b/ur/ur.po
new file mode 100644
index 0000000..09c5f62
--- /dev/null
+++ b/ur/ur.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ur\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/ve/ve.po b/ve/ve.po
new file mode 100644
index 0000000..0995ae1
--- /dev/null
+++ b/ve/ve.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ve\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/wa/wa.po b/wa/wa.po
new file mode 100644
index 0000000..bca0f13
--- /dev/null
+++ b/wa/wa.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: wa\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/wo/wo.po b/wo/wo.po
new file mode 100644
index 0000000..1749c76
--- /dev/null
+++ b/wo/wo.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: wo\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/zh_HK/zh_HK.po b/zh_HK/zh_HK.po
new file mode 100644
index 0000000..cb5ce08
--- /dev/null
+++ b/zh_HK/zh_HK.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: zh_HK\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
diff --git a/zu/zu.po b/zu/zu.po
new file mode 100644
index 0000000..c22b2aa
--- /dev/null
+++ b/zu/zu.po
@@ -0,0 +1,565 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2013-09-09 11:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: zu\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: ../liveusb/dialog.py:150 ../liveusb/launcher_ui.py:149
+#, python-format
+msgid "%(distribution)s LiveUSB Creator"
+msgstr ""
+
+#: ../liveusb/gui.py:776
+#, python-format
+msgid "%(filename)s selected"
+msgstr ""
+
+#: ../liveusb/creator.py:1004
+#, python-format
+msgid "%s already bootable"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:156
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Need help? Read the </span><a href=\"file:///usr/share/doc/tails/website/doc/first_steps/usb_installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a><span style=\" font-size:10pt;\">.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:151
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto a USB stick. All data on the target drive will be lost.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:153
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Copy the running Tails onto an already installed Tails USB stick. Other partitions found on the stick are preserved.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:155
+msgid ""
+"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
+"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
+"p, li { white-space: pre-wrap; }\n"
+"</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
+"<p style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"><span style=\" font-size:10pt;\">Upgrade an already installed Tails USB stick from a new ISO image.</span></p></body></html>"
+msgstr ""
+
+#: ../liveusb/dialog.py:154
+msgid "Alt+B"
+msgstr ""
+
+#: ../liveusb/dialog.py:153
+msgid "Browse"
+msgstr ""
+
+#: ../liveusb/dialog.py:160
+msgid ""
+"By allocating extra space on your USB stick for a persistent overlay, you "
+"will be able to store data and make permanent modifications to your live "
+"operating system. Without it, you will not be able to save data that will "
+"persist after a reboot."
+msgstr ""
+
+#: ../liveusb/creator.py:1106 ../liveusb/creator.py:1369
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr ""
+
+#: ../liveusb/creator.py:1317
+msgid "Cannot find"
+msgstr ""
+
+#: ../liveusb/creator.py:545
+#, python-format
+msgid "Cannot find device %s"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:150
+msgid ""
+"Clone\n"
+"&&\n"
+"Install"
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:152
+msgid ""
+"Clone\n"
+"&&\n"
+"Upgrade"
+msgstr ""
+
+#: ../liveusb/dialog.py:165
+msgid "Create Live USB"
+msgstr ""
+
+#: ../liveusb/creator.py:400
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
+
+#: ../liveusb/gui.py:556
+msgid ""
+"Device is not yet mounted, so we cannot determine the amount of free space."
+msgstr ""
+
+#: ../liveusb/dialog.py:157
+#, python-format
+msgid "Download %(distribution)s"
+msgstr ""
+
+#: ../liveusb/gui.py:750
+msgid "Download complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:754
+msgid "Download failed: "
+msgstr ""
+
+#: ../liveusb/gui.py:88
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../liveusb/creator.py:1102
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
+
+#: ../liveusb/creator.py:808
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:1182
+msgid "Error probing device"
+msgstr ""
+
+#: ../liveusb/gui.py:227
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
+
+#: ../liveusb/creator.py:376
+msgid ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
+
+#: ../liveusb/creator.py:145
+msgid "Extracting live image to USB device..."
+msgstr ""
+
+#: ../liveusb/creator.py:1047
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr ""
+
+#: ../liveusb/creator.py:140
+msgid "ISO MD5 checksum passed"
+msgstr ""
+
+#: ../liveusb/creator.py:138
+msgid "ISO MD5 checksum verification failed"
+msgstr ""
+
+#: ../liveusb/dialog.py:156
+msgid ""
+"If you do not select an existing Live ISO, the selected release will be "
+"downloaded for you."
+msgstr ""
+
+#: ../liveusb/gui.py:619
+msgid "Installation complete!"
+msgstr ""
+
+#: ../liveusb/gui.py:279
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr ""
+
+#: ../liveusb/gui.py:620
+msgid "Installation was completed. Press OK to close this program."
+msgstr ""
+
+#: ../liveusb/creator.py:900 ../liveusb/creator.py:1223
+msgid "Installing bootloader..."
+msgstr ""
+
+#: ../liveusb/gui.py:284
+msgid "LiveUSB creation failed!"
+msgstr ""
+
+#: ../liveusb/creator.py:1318
+msgid ""
+"Make sure to extract the entire liveusb-creator zip file before running this"
+" program."
+msgstr ""
+
+#: ../liveusb/creator.py:1194
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
+
+#: ../liveusb/creator.py:830
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr ""
+
+#: ../liveusb/gui.py:681 ../liveusb/gui.py:698
+msgid "Next"
+msgstr ""
+
+#: ../liveusb/gui.py:562
+#, python-format
+msgid "No free space on device %(device)s"
+msgstr ""
+
+#: ../liveusb/creator.py:797
+msgid "No mount points found"
+msgstr ""
+
+#: ../liveusb/creator.py:393
+#, python-format
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../liveusb/gui.py:543
+msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgstr ""
+
+#: ../liveusb/gui.py:539
+msgid "Partition is FAT32; Restricting overlay size to 4G"
+msgstr ""
+
+#: ../liveusb/creator.py:226 ../liveusb/creator.py:837
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
+
+#: ../liveusb/gui.py:610
+msgid "Persistent Storage"
+msgstr ""
+
+#: ../liveusb/dialog.py:161
+msgid "Persistent Storage (0 MB)"
+msgstr ""
+
+#: ../liveusb/gui.py:679 ../liveusb/gui.py:696
+msgid "Press 'Next' if you wish to continue."
+msgstr ""
+
+#: ../liveusb/gui.py:456
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../liveusb/gui.py:461
+msgid "Releases updated!"
+msgstr ""
+
+#: ../liveusb/creator.py:923 ../liveusb/creator.py:1241
+#, python-format
+msgid "Removing %(file)s"
+msgstr ""
+
+#: ../liveusb/creator.py:469
+msgid "Removing existing Live OS"
+msgstr ""
+
+#: ../liveusb/creator.py:1096
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
+
+#: ../liveusb/gui.py:761
+msgid "Select Live ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:182
+msgid "Setting up OLPC boot file..."
+msgstr ""
+
+#: ../liveusb/creator.py:711
+#, python-format
+msgid ""
+"Some partitions of USB device %(device)s are mounted. They will be unmounted"
+" before starting the installation process."
+msgstr ""
+
+#: ../liveusb/creator.py:131
+msgid ""
+"Source type does not support verification of ISO MD5 checksum, skipping"
+msgstr ""
+
+#: ../liveusb/creator.py:1130
+msgid "Synchronizing data on disk..."
+msgstr ""
+
+#: ../liveusb/dialog.py:159
+msgid "Target Device"
+msgstr ""
+
+#: ../liveusb/gui.py:643
+msgid ""
+"The Master Boot Record on your device is blank. Pressing 'Create Live USB' "
+"again will reset the MBR on this device."
+msgstr ""
+
+#: ../liveusb/gui.py:764
+msgid ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
+
+#: ../liveusb/creator.py:337
+#, python-format
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
+
+#: ../liveusb/dialog.py:151
+msgid ""
+"This button allows you to browse for an existing Live system ISO that you "
+"have previously downloaded. If you do not select one, a release will be "
+"downloaded for you automatically."
+msgstr ""
+
+#: ../liveusb/dialog.py:164
+msgid ""
+"This button will begin the LiveUSB creation process. This entails "
+"optionally downloading a release (if an existing one wasn't selected), "
+"extracting the ISO to the USB device, creating the persistent overlay, and "
+"installing the bootloader."
+msgstr ""
+
+#: ../liveusb/dialog.py:158
+msgid ""
+"This is the USB stick that you want to install your Live system on. This "
+"device must be formatted with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/dialog.py:163
+msgid ""
+"This is the progress bar that will indicate how far along in the LiveUSB "
+"creation process you are"
+msgstr ""
+
+#: ../liveusb/dialog.py:162
+msgid "This is the status console, where all messages get written to."
+msgstr ""
+
+#: ../liveusb/creator.py:895
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:478 ../liveusb/creator.py:489
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:459
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
+
+#: ../liveusb/gui.py:418
+msgid "Unable to find any USB drive"
+msgstr ""
+
+#: ../liveusb/creator.py:1184
+msgid "Unable to find any removable device"
+msgstr ""
+
+#: ../liveusb/creator.py:1024
+msgid "Unable to find partition"
+msgstr ""
+
+#: ../liveusb/creator.py:1264
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr ""
+
+#: ../liveusb/gui.py:671
+msgid "Unable to mount device"
+msgstr ""
+
+#: ../liveusb/creator.py:785
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:494
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:482
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:1099
+msgid ""
+"Unable to reset MBR. You may not have the `syslinux` package installed."
+msgstr ""
+
+#: ../liveusb/gui.py:770
+msgid ""
+"Unable to use the selected file. You may have better luck if you move your "
+"ISO to the root of your drive (ie: C:\\)"
+msgstr ""
+
+#: ../liveusb/creator.py:692
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
+
+#: ../liveusb/creator.py:382
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
+
+#: ../liveusb/creator.py:781
+#, python-format
+msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgstr ""
+
+#: ../liveusb/creator.py:760 ../liveusb/creator.py:874
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
+
+#: ../liveusb/gui.py:84
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:822
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:818
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
+
+#: ../liveusb/creator.py:765 ../liveusb/creator.py:877
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
+
+#: ../liveusb/creator.py:763
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
+msgstr ""
+
+#: ../liveusb/creator.py:1197
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
+
+#: ../liveusb/launcher_ui.py:154
+msgid "Upgrade from ISO"
+msgstr ""
+
+#: ../liveusb/dialog.py:152
+msgid "Use existing Live system ISO"
+msgstr ""
+
+#: ../liveusb/creator.py:133
+msgid "Verifying ISO MD5 checksum"
+msgstr ""
+
+#: ../liveusb/creator.py:356
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:360
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
+
+#: ../liveusb/creator.py:871 ../liveusb/creator.py:1190
+msgid "Verifying filesystem..."
+msgstr ""
+
+#: ../liveusb/gui.py:677
+msgid "Warning: All data on the selected drive will be lost."
+msgstr ""
+
+#: ../liveusb/gui.py:694
+msgid ""
+"Warning: Creating a new persistent overlay will delete your existing one."
+msgstr ""
+
+#: ../liveusb/gui.py:657
+msgid ""
+"Warning: The Master Boot Record on your device does not match your system's "
+"syslinux MBR. If you have trouble booting this stick, try running the "
+"liveusb-creator with the --reset-mbr option."
+msgstr ""
+
+#: ../liveusb/gui.py:392
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../liveusb/creator.py:152
+#, python-format
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
+
+#: ../liveusb/creator.py:607
+msgid ""
+"You are using an old version of syslinux-extlinux that does not support the "
+"ext4 filesystem"
+msgstr ""
+
+#: ../liveusb/gui.py:755
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../liveusb/creator.py:92
+msgid "You must run this application as root"
+msgstr ""
+
+#: ../liveusb/gui.py:691
+msgid ""
+"Your device already contains a LiveOS.\n"
+"If you continue, this will be overwritten."
+msgstr ""
+
+#: ../liveusb/dialog.py:155
+msgid "or"
+msgstr ""
commit ae97ea77f199132d85a6ecdbdd955fa885336452
Author: Translation commit bot <translation(a)torproject.org>
Date: Mon Sep 16 19:07:01 2013 +0000
Update translations for torcheck
---
ak/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
am/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
arn/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
be/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
bn/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
bo/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
br/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
csb/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
dz/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
fo/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
fur/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
fy/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ga/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
gun/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ha/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ht/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
hy/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
jv/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
km/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
kw/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
lb/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
lg/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ln/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
lo/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
mg/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
mi/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ml/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
mn/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
mt/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
nah/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
nap/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ne/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
nn/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
nso/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
oc/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
or/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
pap/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
pms/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ps/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ru(a)petr1708/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
so/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
son/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
st/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
su/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
te/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
tg/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ti/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
tk/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ur/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
ve/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
wa/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
wo/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
zh_HK/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
zu/torcheck.po | 56 +++++++++++++++++++++++++++++++++++++++++++++++
54 files changed, 3024 insertions(+)
diff --git a/ak/torcheck.po b/ak/torcheck.po
new file mode 100644
index 0000000..b5f0c08
--- /dev/null
+++ b/ak/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ak\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/am/torcheck.po b/am/torcheck.po
new file mode 100644
index 0000000..b50bfb7
--- /dev/null
+++ b/am/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: am\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/arn/torcheck.po b/arn/torcheck.po
new file mode 100644
index 0000000..f76bb90
--- /dev/null
+++ b/arn/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: arn\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/be/torcheck.po b/be/torcheck.po
new file mode 100644
index 0000000..eb897b9
--- /dev/null
+++ b/be/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: be\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/bn/torcheck.po b/bn/torcheck.po
new file mode 100644
index 0000000..ba0c982
--- /dev/null
+++ b/bn/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: bn\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/bo/torcheck.po b/bo/torcheck.po
new file mode 100644
index 0000000..6d596d8
--- /dev/null
+++ b/bo/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: bo\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/br/torcheck.po b/br/torcheck.po
new file mode 100644
index 0000000..a0e0102
--- /dev/null
+++ b/br/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: br\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/csb/torcheck.po b/csb/torcheck.po
new file mode 100644
index 0000000..5a6f8ed
--- /dev/null
+++ b/csb/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: csb\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/dz/torcheck.po b/dz/torcheck.po
new file mode 100644
index 0000000..a198a33
--- /dev/null
+++ b/dz/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: dz\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/fo/torcheck.po b/fo/torcheck.po
new file mode 100644
index 0000000..42f6329
--- /dev/null
+++ b/fo/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: fo\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/fur/torcheck.po b/fur/torcheck.po
new file mode 100644
index 0000000..7886b3e
--- /dev/null
+++ b/fur/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: fur\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/fy/torcheck.po b/fy/torcheck.po
new file mode 100644
index 0000000..ae8a429
--- /dev/null
+++ b/fy/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: fy\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ga/torcheck.po b/ga/torcheck.po
new file mode 100644
index 0000000..92855fe
--- /dev/null
+++ b/ga/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ga\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/gun/torcheck.po b/gun/torcheck.po
new file mode 100644
index 0000000..cbe9ff2
--- /dev/null
+++ b/gun/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: gun\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ha/torcheck.po b/ha/torcheck.po
new file mode 100644
index 0000000..a457a5b
--- /dev/null
+++ b/ha/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ha\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ht/torcheck.po b/ht/torcheck.po
new file mode 100644
index 0000000..90734cc
--- /dev/null
+++ b/ht/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ht\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/hy/torcheck.po b/hy/torcheck.po
new file mode 100644
index 0000000..2f3f3fc
--- /dev/null
+++ b/hy/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: hy\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/jv/torcheck.po b/jv/torcheck.po
new file mode 100644
index 0000000..8f3660a
--- /dev/null
+++ b/jv/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: jv\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/km/torcheck.po b/km/torcheck.po
new file mode 100644
index 0000000..ed61b93
--- /dev/null
+++ b/km/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: km\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/kw/torcheck.po b/kw/torcheck.po
new file mode 100644
index 0000000..9c0c69b
--- /dev/null
+++ b/kw/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: kw\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/lb/torcheck.po b/lb/torcheck.po
new file mode 100644
index 0000000..f53fc66
--- /dev/null
+++ b/lb/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: lb\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/lg/torcheck.po b/lg/torcheck.po
new file mode 100644
index 0000000..5b1d457
--- /dev/null
+++ b/lg/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ln/torcheck.po b/ln/torcheck.po
new file mode 100644
index 0000000..a9a3b9a
--- /dev/null
+++ b/ln/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ln\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/lo/torcheck.po b/lo/torcheck.po
new file mode 100644
index 0000000..a13b2f5
--- /dev/null
+++ b/lo/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: lo\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/mg/torcheck.po b/mg/torcheck.po
new file mode 100644
index 0000000..8644b93
--- /dev/null
+++ b/mg/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: mg\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/mi/torcheck.po b/mi/torcheck.po
new file mode 100644
index 0000000..738eafb
--- /dev/null
+++ b/mi/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: mi\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ml/torcheck.po b/ml/torcheck.po
new file mode 100644
index 0000000..7fafd07
--- /dev/null
+++ b/ml/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ml\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/mn/torcheck.po b/mn/torcheck.po
new file mode 100644
index 0000000..fcb1ea1
--- /dev/null
+++ b/mn/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: mn\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/mt/torcheck.po b/mt/torcheck.po
new file mode 100644
index 0000000..2e78717
--- /dev/null
+++ b/mt/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: mt\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/nah/torcheck.po b/nah/torcheck.po
new file mode 100644
index 0000000..9aedd18
--- /dev/null
+++ b/nah/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: nah\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/nap/torcheck.po b/nap/torcheck.po
new file mode 100644
index 0000000..4d01de5
--- /dev/null
+++ b/nap/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: nap\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ne/torcheck.po b/ne/torcheck.po
new file mode 100644
index 0000000..e4d43f5
--- /dev/null
+++ b/ne/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ne\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/nn/torcheck.po b/nn/torcheck.po
new file mode 100644
index 0000000..7445a22
--- /dev/null
+++ b/nn/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: nn\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/nso/torcheck.po b/nso/torcheck.po
new file mode 100644
index 0000000..52c7bc5
--- /dev/null
+++ b/nso/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: nso\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/oc/torcheck.po b/oc/torcheck.po
new file mode 100644
index 0000000..78c8773
--- /dev/null
+++ b/oc/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: oc\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/or/torcheck.po b/or/torcheck.po
new file mode 100644
index 0000000..fa85afb
--- /dev/null
+++ b/or/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: or\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/pap/torcheck.po b/pap/torcheck.po
new file mode 100644
index 0000000..1c4728d
--- /dev/null
+++ b/pap/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: pap\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/pms/torcheck.po b/pms/torcheck.po
new file mode 100644
index 0000000..896f81a
--- /dev/null
+++ b/pms/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: pms\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ps/torcheck.po b/ps/torcheck.po
new file mode 100644
index 0000000..a1a7452
--- /dev/null
+++ b/ps/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ps\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ru(a)petr1708/torcheck.po b/ru(a)petr1708/torcheck.po
new file mode 100644
index 0000000..70685c0
--- /dev/null
+++ b/ru(a)petr1708/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/so/torcheck.po b/so/torcheck.po
new file mode 100644
index 0000000..bd4e0ca
--- /dev/null
+++ b/so/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: so\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/son/torcheck.po b/son/torcheck.po
new file mode 100644
index 0000000..62ed259
--- /dev/null
+++ b/son/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: son\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/st/torcheck.po b/st/torcheck.po
new file mode 100644
index 0000000..ff7eee6
--- /dev/null
+++ b/st/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: st\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/su/torcheck.po b/su/torcheck.po
new file mode 100644
index 0000000..2a1e1a0
--- /dev/null
+++ b/su/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: su\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/te/torcheck.po b/te/torcheck.po
new file mode 100644
index 0000000..330738f
--- /dev/null
+++ b/te/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: te\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/tg/torcheck.po b/tg/torcheck.po
new file mode 100644
index 0000000..7be2bcd
--- /dev/null
+++ b/tg/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: tg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ti/torcheck.po b/ti/torcheck.po
new file mode 100644
index 0000000..5383c72
--- /dev/null
+++ b/ti/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ti\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/tk/torcheck.po b/tk/torcheck.po
new file mode 100644
index 0000000..022ddd9
--- /dev/null
+++ b/tk/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: tk\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ur/torcheck.po b/ur/torcheck.po
new file mode 100644
index 0000000..8621677
--- /dev/null
+++ b/ur/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ur\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/ve/torcheck.po b/ve/torcheck.po
new file mode 100644
index 0000000..53d52c5
--- /dev/null
+++ b/ve/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: ve\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/wa/torcheck.po b/wa/torcheck.po
new file mode 100644
index 0000000..a989c7b
--- /dev/null
+++ b/wa/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: wa\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/wo/torcheck.po b/wo/torcheck.po
new file mode 100644
index 0000000..42815ba
--- /dev/null
+++ b/wo/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: wo\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/zh_HK/torcheck.po b/zh_HK/torcheck.po
new file mode 100644
index 0000000..858d556
--- /dev/null
+++ b/zh_HK/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: zh_HK\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
diff --git a/zu/torcheck.po b/zu/torcheck.po
new file mode 100644
index 0000000..695365f
--- /dev/null
+++ b/zu/torcheck.po
@@ -0,0 +1,56 @@
+# TorCheck gettext template
+# Copyright (C) 2008-2012 The Tor Project, Inc
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2012-02-16 20:28+PDT\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"Language: zu\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Congratulations. Your browser is configured to use Tor."
+msgstr ""
+
+msgid ""
+"Please refer to the <a href=\"https://www.torproject.org/\">Tor website</a> "
+"for further information about using Tor safely. You are now free to browse "
+"the Internet anonymously."
+msgstr ""
+
+msgid "There is a security update available for the Tor Browser Bundle."
+msgstr ""
+
+msgid ""
+"<a href=\"https://www.torproject.org/download/download-easy.html\">Click "
+"here to go to the download page</a>"
+msgstr ""
+
+msgid "Sorry. You are not using Tor."
+msgstr ""
+
+msgid ""
+"If you are attempting to use a Tor client, please refer to the <a "
+"href=\"https://www.torproject.org/\">Tor website</a> and specifically the <a"
+" href=\"https://www.torproject.org/docs/faq#DoesntWork\">instructions for "
+"configuring your Tor client</a>."
+msgstr ""
+
+msgid "Sorry, your query failed or an unexpected response was received."
+msgstr ""
+
+msgid ""
+"A temporary service outage prevents us from determining if your source IP "
+"address is a <a href=\"https://www.torproject.org/\">Tor</a> node."
+msgstr ""
+
+msgid "Your IP address appears to be: "
+msgstr ""
commit 51960f316676dadbbb71ca6debd0d355dc50fe0c
Author: Translation commit bot <translation(a)torproject.org>
Date: Mon Sep 16 19:04:33 2013 +0000
Update translations for vidalia_help
---
ak/bridges.po | 10 +-
ak/config.po | 22 +--
ak/index.po | 10 +-
ak/links.po | 10 +-
ak/log.po | 10 +-
ak/netview.po | 10 +-
ak/running.po | 10 +-
ak/server.po | 10 +-
ak/services.po | 10 +-
ak/troubleshooting.po | 10 +-
am/bridges.po | 10 +-
am/config.po | 22 +--
am/index.po | 10 +-
am/links.po | 10 +-
am/log.po | 10 +-
am/netview.po | 10 +-
am/running.po | 10 +-
am/server.po | 10 +-
am/services.po | 10 +-
am/troubleshooting.po | 10 +-
arn/bridges.po | 10 +-
arn/config.po | 22 +--
arn/index.po | 10 +-
arn/links.po | 10 +-
arn/log.po | 10 +-
arn/netview.po | 10 +-
arn/running.po | 10 +-
arn/server.po | 10 +-
arn/services.po | 10 +-
arn/troubleshooting.po | 10 +-
be/bridges.po | 10 +-
be/config.po | 22 +--
be/index.po | 10 +-
be/links.po | 10 +-
be/log.po | 10 +-
be/netview.po | 10 +-
be/running.po | 10 +-
be/server.po | 10 +-
be/services.po | 10 +-
be/troubleshooting.po | 10 +-
bn/bridges.po | 10 +-
bn/config.po | 22 +--
bn/index.po | 10 +-
bn/links.po | 10 +-
bn/log.po | 10 +-
bn/netview.po | 10 +-
bn/running.po | 10 +-
bn/server.po | 10 +-
bn/services.po | 10 +-
bn/troubleshooting.po | 10 +-
bo/bridges.po | 10 +-
bo/config.po | 22 +--
bo/index.po | 10 +-
bo/links.po | 10 +-
bo/log.po | 10 +-
bo/netview.po | 10 +-
bo/running.po | 10 +-
bo/server.po | 10 +-
bo/services.po | 10 +-
bo/troubleshooting.po | 10 +-
br/bridges.po | 10 +-
br/config.po | 22 +--
br/index.po | 10 +-
br/links.po | 10 +-
br/log.po | 10 +-
br/netview.po | 10 +-
br/running.po | 10 +-
br/server.po | 10 +-
br/services.po | 10 +-
br/troubleshooting.po | 10 +-
csb/bridges.po | 10 +-
csb/config.po | 22 +--
csb/index.po | 10 +-
csb/links.po | 10 +-
csb/log.po | 10 +-
csb/netview.po | 10 +-
csb/running.po | 10 +-
csb/server.po | 10 +-
csb/services.po | 10 +-
csb/troubleshooting.po | 10 +-
dz/bridges.po | 10 +-
dz/config.po | 22 +--
dz/index.po | 10 +-
dz/links.po | 10 +-
dz/log.po | 10 +-
dz/netview.po | 10 +-
dz/running.po | 10 +-
dz/server.po | 10 +-
dz/services.po | 10 +-
dz/troubleshooting.po | 10 +-
fo/bridges.po | 10 +-
fo/config.po | 22 +--
fo/index.po | 10 +-
fo/links.po | 10 +-
fo/log.po | 10 +-
fo/netview.po | 10 +-
fo/running.po | 10 +-
fo/server.po | 10 +-
fo/services.po | 10 +-
fo/troubleshooting.po | 10 +-
fur/bridges.po | 10 +-
fur/config.po | 22 +--
fur/index.po | 10 +-
fur/links.po | 10 +-
fur/log.po | 10 +-
fur/netview.po | 10 +-
fur/running.po | 10 +-
fur/server.po | 10 +-
fur/services.po | 10 +-
fur/troubleshooting.po | 10 +-
fy/bridges.po | 10 +-
fy/config.po | 22 +--
fy/index.po | 10 +-
fy/links.po | 10 +-
fy/log.po | 10 +-
fy/netview.po | 10 +-
fy/running.po | 10 +-
fy/server.po | 10 +-
fy/services.po | 10 +-
fy/troubleshooting.po | 10 +-
ga/bridges.po | 10 +-
ga/config.po | 22 +--
ga/index.po | 10 +-
ga/links.po | 10 +-
ga/log.po | 10 +-
ga/netview.po | 10 +-
ga/running.po | 10 +-
ga/server.po | 10 +-
ga/services.po | 10 +-
ga/troubleshooting.po | 10 +-
gun/bridges.po | 10 +-
gun/config.po | 22 +--
gun/index.po | 10 +-
gun/links.po | 10 +-
gun/log.po | 10 +-
gun/netview.po | 10 +-
gun/running.po | 10 +-
gun/server.po | 10 +-
gun/services.po | 10 +-
gun/troubleshooting.po | 10 +-
ha/bridges.po | 10 +-
ha/config.po | 22 +--
ha/index.po | 10 +-
ha/links.po | 10 +-
ha/log.po | 10 +-
ha/netview.po | 10 +-
ha/running.po | 10 +-
ha/server.po | 10 +-
ha/services.po | 10 +-
ha/troubleshooting.po | 10 +-
ht/bridges.po | 10 +-
ht/config.po | 22 +--
ht/index.po | 10 +-
ht/links.po | 10 +-
ht/log.po | 10 +-
ht/netview.po | 10 +-
ht/running.po | 10 +-
ht/server.po | 10 +-
ht/services.po | 10 +-
ht/troubleshooting.po | 10 +-
hy/bridges.po | 10 +-
hy/config.po | 22 +--
hy/index.po | 10 +-
hy/links.po | 10 +-
hy/log.po | 10 +-
hy/netview.po | 10 +-
hy/running.po | 10 +-
hy/server.po | 10 +-
hy/services.po | 10 +-
hy/troubleshooting.po | 10 +-
jv/bridges.po | 10 +-
jv/config.po | 22 +--
jv/index.po | 10 +-
jv/links.po | 10 +-
jv/log.po | 10 +-
jv/netview.po | 10 +-
jv/running.po | 10 +-
jv/server.po | 10 +-
jv/services.po | 10 +-
jv/troubleshooting.po | 10 +-
km/bridges.po | 10 +-
km/config.po | 22 +--
km/index.po | 10 +-
km/links.po | 10 +-
km/log.po | 10 +-
km/netview.po | 10 +-
km/running.po | 10 +-
km/server.po | 10 +-
km/services.po | 10 +-
km/troubleshooting.po | 10 +-
kw/bridges.po | 10 +-
kw/config.po | 22 +--
kw/index.po | 10 +-
kw/links.po | 10 +-
kw/log.po | 10 +-
kw/netview.po | 10 +-
kw/running.po | 10 +-
kw/server.po | 10 +-
kw/services.po | 10 +-
kw/troubleshooting.po | 10 +-
lb/bridges.po | 10 +-
lb/config.po | 22 +--
lb/index.po | 10 +-
lb/links.po | 10 +-
lb/log.po | 10 +-
lb/netview.po | 10 +-
lb/running.po | 10 +-
lb/server.po | 10 +-
lb/services.po | 10 +-
lb/troubleshooting.po | 10 +-
lg/bridges.po | 100 ++++++++++
lg/config.po | 300 ++++++++++++++++++++++++++++++
lg/index.po | 46 +++++
lg/links.po | 79 ++++++++
lg/log.po | 159 ++++++++++++++++
lg/netview.po | 247 ++++++++++++++++++++++++
lg/running.po | 149 +++++++++++++++
lg/server.po | 403 ++++++++++++++++++++++++++++++++++++++++
lg/services.po | 246 ++++++++++++++++++++++++
lg/troubleshooting.po | 243 ++++++++++++++++++++++++
ln/bridges.po | 10 +-
ln/config.po | 22 +--
ln/index.po | 10 +-
ln/links.po | 10 +-
ln/log.po | 10 +-
ln/netview.po | 10 +-
ln/running.po | 10 +-
ln/server.po | 10 +-
ln/services.po | 10 +-
ln/troubleshooting.po | 10 +-
lo/bridges.po | 10 +-
lo/config.po | 22 +--
lo/index.po | 10 +-
lo/links.po | 10 +-
lo/log.po | 10 +-
lo/netview.po | 10 +-
lo/running.po | 10 +-
lo/server.po | 10 +-
lo/services.po | 10 +-
lo/troubleshooting.po | 10 +-
mg/bridges.po | 10 +-
mg/config.po | 22 +--
mg/index.po | 10 +-
mg/links.po | 10 +-
mg/log.po | 10 +-
mg/netview.po | 10 +-
mg/running.po | 10 +-
mg/server.po | 10 +-
mg/services.po | 10 +-
mg/troubleshooting.po | 10 +-
mi/bridges.po | 10 +-
mi/config.po | 22 +--
mi/index.po | 10 +-
mi/links.po | 10 +-
mi/log.po | 10 +-
mi/netview.po | 10 +-
mi/running.po | 10 +-
mi/server.po | 10 +-
mi/services.po | 10 +-
mi/troubleshooting.po | 10 +-
ml/bridges.po | 10 +-
ml/config.po | 22 +--
ml/index.po | 10 +-
ml/links.po | 10 +-
ml/log.po | 10 +-
ml/netview.po | 10 +-
ml/running.po | 10 +-
ml/server.po | 10 +-
ml/services.po | 10 +-
ml/troubleshooting.po | 10 +-
mn/bridges.po | 10 +-
mn/config.po | 22 +--
mn/index.po | 10 +-
mn/links.po | 10 +-
mn/log.po | 10 +-
mn/netview.po | 10 +-
mn/running.po | 10 +-
mn/server.po | 10 +-
mn/services.po | 10 +-
mn/troubleshooting.po | 10 +-
mt/bridges.po | 10 +-
mt/config.po | 22 +--
mt/index.po | 10 +-
mt/links.po | 10 +-
mt/log.po | 10 +-
mt/netview.po | 10 +-
mt/running.po | 10 +-
mt/server.po | 10 +-
mt/services.po | 10 +-
mt/troubleshooting.po | 10 +-
nah/bridges.po | 10 +-
nah/config.po | 22 +--
nah/index.po | 10 +-
nah/links.po | 10 +-
nah/log.po | 10 +-
nah/netview.po | 10 +-
nah/running.po | 10 +-
nah/server.po | 10 +-
nah/services.po | 10 +-
nah/troubleshooting.po | 10 +-
nap/bridges.po | 10 +-
nap/config.po | 22 +--
nap/index.po | 10 +-
nap/links.po | 10 +-
nap/log.po | 10 +-
nap/netview.po | 10 +-
nap/running.po | 10 +-
nap/server.po | 10 +-
nap/services.po | 10 +-
nap/troubleshooting.po | 10 +-
ne/bridges.po | 10 +-
ne/config.po | 22 +--
ne/index.po | 10 +-
ne/links.po | 10 +-
ne/log.po | 10 +-
ne/netview.po | 10 +-
ne/running.po | 10 +-
ne/server.po | 10 +-
ne/services.po | 10 +-
ne/troubleshooting.po | 10 +-
nn/bridges.po | 10 +-
nn/config.po | 22 +--
nn/index.po | 10 +-
nn/links.po | 10 +-
nn/log.po | 10 +-
nn/netview.po | 10 +-
nn/running.po | 10 +-
nn/server.po | 10 +-
nn/services.po | 10 +-
nn/troubleshooting.po | 10 +-
nso/bridges.po | 10 +-
nso/config.po | 22 +--
nso/index.po | 10 +-
nso/links.po | 10 +-
nso/log.po | 10 +-
nso/netview.po | 10 +-
nso/running.po | 10 +-
nso/server.po | 10 +-
nso/services.po | 10 +-
nso/troubleshooting.po | 10 +-
oc/bridges.po | 10 +-
oc/config.po | 22 +--
oc/index.po | 10 +-
oc/links.po | 10 +-
oc/log.po | 10 +-
oc/netview.po | 10 +-
oc/running.po | 10 +-
oc/server.po | 10 +-
oc/services.po | 10 +-
oc/troubleshooting.po | 10 +-
or/bridges.po | 10 +-
or/config.po | 22 +--
or/index.po | 10 +-
or/links.po | 10 +-
or/log.po | 10 +-
or/netview.po | 10 +-
or/running.po | 10 +-
or/server.po | 10 +-
or/services.po | 10 +-
or/troubleshooting.po | 10 +-
pap/bridges.po | 10 +-
pap/config.po | 22 +--
pap/index.po | 10 +-
pap/links.po | 10 +-
pap/log.po | 10 +-
pap/netview.po | 10 +-
pap/running.po | 10 +-
pap/server.po | 10 +-
pap/services.po | 10 +-
pap/troubleshooting.po | 10 +-
pms/bridges.po | 10 +-
pms/config.po | 22 +--
pms/index.po | 10 +-
pms/links.po | 10 +-
pms/log.po | 10 +-
pms/netview.po | 10 +-
pms/running.po | 10 +-
pms/server.po | 10 +-
pms/services.po | 10 +-
pms/troubleshooting.po | 10 +-
ps/bridges.po | 10 +-
ps/config.po | 22 +--
ps/index.po | 10 +-
ps/links.po | 10 +-
ps/log.po | 10 +-
ps/netview.po | 10 +-
ps/running.po | 10 +-
ps/server.po | 10 +-
ps/services.po | 10 +-
ps/troubleshooting.po | 10 +-
ru(a)petr1708/bridges.po | 100 ++++++++++
ru(a)petr1708/config.po | 300 ++++++++++++++++++++++++++++++
ru(a)petr1708/index.po | 46 +++++
ru(a)petr1708/links.po | 79 ++++++++
ru(a)petr1708/log.po | 159 ++++++++++++++++
ru(a)petr1708/netview.po | 247 ++++++++++++++++++++++++
ru(a)petr1708/running.po | 149 +++++++++++++++
ru(a)petr1708/server.po | 403 ++++++++++++++++++++++++++++++++++++++++
ru(a)petr1708/services.po | 246 ++++++++++++++++++++++++
ru(a)petr1708/troubleshooting.po | 243 ++++++++++++++++++++++++
so/bridges.po | 10 +-
so/config.po | 22 +--
so/index.po | 10 +-
so/links.po | 10 +-
so/log.po | 10 +-
so/netview.po | 10 +-
so/running.po | 10 +-
so/server.po | 10 +-
so/services.po | 10 +-
so/troubleshooting.po | 10 +-
son/bridges.po | 10 +-
son/config.po | 22 +--
son/index.po | 10 +-
son/links.po | 10 +-
son/log.po | 10 +-
son/netview.po | 10 +-
son/running.po | 10 +-
son/server.po | 10 +-
son/services.po | 10 +-
son/troubleshooting.po | 10 +-
st/bridges.po | 10 +-
st/config.po | 22 +--
st/index.po | 10 +-
st/links.po | 10 +-
st/log.po | 10 +-
st/netview.po | 10 +-
st/running.po | 10 +-
st/server.po | 10 +-
st/services.po | 10 +-
st/troubleshooting.po | 10 +-
su/bridges.po | 10 +-
su/config.po | 22 +--
su/index.po | 10 +-
su/links.po | 10 +-
su/log.po | 10 +-
su/netview.po | 10 +-
su/running.po | 10 +-
su/server.po | 10 +-
su/services.po | 10 +-
su/troubleshooting.po | 10 +-
te/bridges.po | 10 +-
te/config.po | 22 +--
te/index.po | 10 +-
te/links.po | 10 +-
te/log.po | 10 +-
te/netview.po | 10 +-
te/running.po | 10 +-
te/server.po | 10 +-
te/services.po | 10 +-
te/troubleshooting.po | 10 +-
tg/bridges.po | 10 +-
tg/config.po | 22 +--
tg/index.po | 10 +-
tg/links.po | 10 +-
tg/log.po | 10 +-
tg/netview.po | 10 +-
tg/running.po | 10 +-
tg/server.po | 10 +-
tg/services.po | 10 +-
tg/troubleshooting.po | 10 +-
ti/bridges.po | 10 +-
ti/config.po | 22 +--
ti/index.po | 10 +-
ti/links.po | 10 +-
ti/log.po | 10 +-
ti/netview.po | 10 +-
ti/running.po | 10 +-
ti/server.po | 10 +-
ti/services.po | 10 +-
ti/troubleshooting.po | 10 +-
tk/bridges.po | 10 +-
tk/config.po | 22 +--
tk/index.po | 10 +-
tk/links.po | 10 +-
tk/log.po | 10 +-
tk/netview.po | 10 +-
tk/running.po | 10 +-
tk/server.po | 10 +-
tk/services.po | 10 +-
tk/troubleshooting.po | 10 +-
ur/bridges.po | 10 +-
ur/config.po | 22 +--
ur/index.po | 10 +-
ur/links.po | 10 +-
ur/log.po | 10 +-
ur/netview.po | 10 +-
ur/running.po | 10 +-
ur/server.po | 10 +-
ur/services.po | 10 +-
ur/troubleshooting.po | 10 +-
ve/bridges.po | 10 +-
ve/config.po | 22 +--
ve/index.po | 10 +-
ve/links.po | 10 +-
ve/log.po | 10 +-
ve/netview.po | 10 +-
ve/running.po | 10 +-
ve/server.po | 10 +-
ve/services.po | 10 +-
ve/troubleshooting.po | 10 +-
wa/bridges.po | 10 +-
wa/config.po | 22 +--
wa/index.po | 10 +-
wa/links.po | 10 +-
wa/log.po | 10 +-
wa/netview.po | 10 +-
wa/running.po | 10 +-
wa/server.po | 10 +-
wa/services.po | 10 +-
wa/troubleshooting.po | 10 +-
wo/bridges.po | 10 +-
wo/config.po | 22 +--
wo/index.po | 10 +-
wo/links.po | 10 +-
wo/log.po | 10 +-
wo/netview.po | 10 +-
wo/running.po | 10 +-
wo/server.po | 10 +-
wo/services.po | 10 +-
wo/troubleshooting.po | 10 +-
zh_HK/bridges.po | 10 +-
zh_HK/config.po | 22 +--
zh_HK/index.po | 10 +-
zh_HK/links.po | 10 +-
zh_HK/log.po | 10 +-
zh_HK/netview.po | 10 +-
zh_HK/running.po | 10 +-
zh_HK/server.po | 10 +-
zh_HK/services.po | 10 +-
zh_HK/troubleshooting.po | 10 +-
zu/bridges.po | 10 +-
zu/config.po | 22 +--
zu/index.po | 10 +-
zu/links.po | 10 +-
zu/log.po | 10 +-
zu/netview.po | 10 +-
zu/running.po | 10 +-
zu/server.po | 10 +-
zu/services.po | 10 +-
zu/troubleshooting.po | 10 +-
540 files changed, 6232 insertions(+), 3536 deletions(-)
diff --git a/ak/bridges.po b/ak/bridges.po
index c221c6e..e99dbbf 100644
--- a/ak/bridges.po
+++ b/ak/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ak/config.po b/ak/config.po
index ea20c04..64e09ca 100644
--- a/ak/config.po
+++ b/ak/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ak/index.po b/ak/index.po
index 6b1a181..4d9649c 100644
--- a/ak/index.po
+++ b/ak/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ak/links.po b/ak/links.po
index b1975c5..742ee37 100644
--- a/ak/links.po
+++ b/ak/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ak/log.po b/ak/log.po
index 8d98858..f58b274 100644
--- a/ak/log.po
+++ b/ak/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ak/netview.po b/ak/netview.po
index 73ec1da..36ef087 100644
--- a/ak/netview.po
+++ b/ak/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ak/running.po b/ak/running.po
index b489a1d..5982e4c 100644
--- a/ak/running.po
+++ b/ak/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ak/server.po b/ak/server.po
index b455d42..37b55af 100644
--- a/ak/server.po
+++ b/ak/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ak/services.po b/ak/services.po
index b672b12..f573835 100644
--- a/ak/services.po
+++ b/ak/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ak/troubleshooting.po b/ak/troubleshooting.po
index e280ad1..eda1511 100644
--- a/ak/troubleshooting.po
+++ b/ak/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Akan (http://www.transifex.com/projects/p/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ak\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/am/bridges.po b/am/bridges.po
index cff4be1..7463ab4 100644
--- a/am/bridges.po
+++ b/am/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/am/config.po b/am/config.po
index 34c3473..85982eb 100644
--- a/am/config.po
+++ b/am/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/am/index.po b/am/index.po
index c048d5c..7fd4ab1 100644
--- a/am/index.po
+++ b/am/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/am/links.po b/am/links.po
index 5da4b20..b7313a0 100644
--- a/am/links.po
+++ b/am/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/am/log.po b/am/log.po
index a6a1dfa..2446146 100644
--- a/am/log.po
+++ b/am/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/am/netview.po b/am/netview.po
index 54f3dc9..1204376 100644
--- a/am/netview.po
+++ b/am/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/am/running.po b/am/running.po
index c9f7e5f..bce0578 100644
--- a/am/running.po
+++ b/am/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/am/server.po b/am/server.po
index b6bfe27..aefd5fc 100644
--- a/am/server.po
+++ b/am/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/am/services.po b/am/services.po
index d560a83..189b17c 100644
--- a/am/services.po
+++ b/am/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/am/troubleshooting.po b/am/troubleshooting.po
index b4ce194..46f20c1 100644
--- a/am/troubleshooting.po
+++ b/am/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Amharic (http://www.transifex.com/projects/p/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: am\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/arn/bridges.po b/arn/bridges.po
index 46df36f..5be4f44 100644
--- a/arn/bridges.po
+++ b/arn/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/arn/config.po b/arn/config.po
index ea767d0..bcc83ad 100644
--- a/arn/config.po
+++ b/arn/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/arn/index.po b/arn/index.po
index 5b90b84..e701334 100644
--- a/arn/index.po
+++ b/arn/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/arn/links.po b/arn/links.po
index 27e9c83..310e6b9 100644
--- a/arn/links.po
+++ b/arn/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/arn/log.po b/arn/log.po
index a8d0287..86e5a50 100644
--- a/arn/log.po
+++ b/arn/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/arn/netview.po b/arn/netview.po
index b8d65ed..74d4fd4 100644
--- a/arn/netview.po
+++ b/arn/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/arn/running.po b/arn/running.po
index a983132..fc84333 100644
--- a/arn/running.po
+++ b/arn/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/arn/server.po b/arn/server.po
index 23d5e1e..c26376f 100644
--- a/arn/server.po
+++ b/arn/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/arn/services.po b/arn/services.po
index e8092ee..2dfd01c 100644
--- a/arn/services.po
+++ b/arn/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/arn/troubleshooting.po b/arn/troubleshooting.po
index d6fdeac..76fe1b3 100644
--- a/arn/troubleshooting.po
+++ b/arn/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mapudungun (http://www.transifex.com/projects/p/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: arn\n"
-"Plural-Forms: nplurals=2; plural=n > 1\n"
+"Plural-Forms: nplurals=2; plural=n > 1;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/be/bridges.po b/be/bridges.po
index 8c53f57..9d8943e 100644
--- a/be/bridges.po
+++ b/be/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/be/config.po b/be/config.po
index 2550115..ab76b65 100644
--- a/be/config.po
+++ b/be/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/be/index.po b/be/index.po
index ad9b996..e33b1e9 100644
--- a/be/index.po
+++ b/be/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/be/links.po b/be/links.po
index c1be1db..7ac206d 100644
--- a/be/links.po
+++ b/be/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/be/log.po b/be/log.po
index ea2606d..8e61958 100644
--- a/be/log.po
+++ b/be/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/be/netview.po b/be/netview.po
index 246778c..d18d5bd 100644
--- a/be/netview.po
+++ b/be/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/be/running.po b/be/running.po
index a83db4e..8766217 100644
--- a/be/running.po
+++ b/be/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/be/server.po b/be/server.po
index 4353c37..7f03c7c 100644
--- a/be/server.po
+++ b/be/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/be/services.po b/be/services.po
index 33f0b7c..94cdfaa 100644
--- a/be/services.po
+++ b/be/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/be/troubleshooting.po b/be/troubleshooting.po
index 081093c..726fe48 100644
--- a/be/troubleshooting.po
+++ b/be/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Belarusian (http://www.transifex.com/projects/p/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: be\n"
-"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
+"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/bn/bridges.po b/bn/bridges.po
index 617d885..8a87da4 100644
--- a/bn/bridges.po
+++ b/bn/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/bn/config.po b/bn/config.po
index 5188335..b658d96 100644
--- a/bn/config.po
+++ b/bn/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/bn/index.po b/bn/index.po
index 8ae5134..5bc33a7 100644
--- a/bn/index.po
+++ b/bn/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/bn/links.po b/bn/links.po
index 492c368..ef4e3cc 100644
--- a/bn/links.po
+++ b/bn/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/bn/log.po b/bn/log.po
index 0799c81..a9cd990 100644
--- a/bn/log.po
+++ b/bn/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/bn/netview.po b/bn/netview.po
index bdfb335..4fe00f7 100644
--- a/bn/netview.po
+++ b/bn/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/bn/running.po b/bn/running.po
index 302fac5..21b46d4 100644
--- a/bn/running.po
+++ b/bn/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/bn/server.po b/bn/server.po
index 60227bb..fbd7899 100644
--- a/bn/server.po
+++ b/bn/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/bn/services.po b/bn/services.po
index 74c8cc7..373d3d8 100644
--- a/bn/services.po
+++ b/bn/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/bn/troubleshooting.po b/bn/troubleshooting.po
index 6206ed1..596bdb2 100644
--- a/bn/troubleshooting.po
+++ b/bn/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Bengali (http://www.transifex.com/projects/p/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/bo/bridges.po b/bo/bridges.po
index 127bd4d..f4d3ccf 100644
--- a/bo/bridges.po
+++ b/bo/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/bo/config.po b/bo/config.po
index c328e79..a197fc3 100644
--- a/bo/config.po
+++ b/bo/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/bo/index.po b/bo/index.po
index ca90b19..00282a8 100644
--- a/bo/index.po
+++ b/bo/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/bo/links.po b/bo/links.po
index aceed43..ee918ce 100644
--- a/bo/links.po
+++ b/bo/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/bo/log.po b/bo/log.po
index ebd5472..7c291a7 100644
--- a/bo/log.po
+++ b/bo/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/bo/netview.po b/bo/netview.po
index 5a795a3..07dacc6 100644
--- a/bo/netview.po
+++ b/bo/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/bo/running.po b/bo/running.po
index 5def3ad..8f3484e 100644
--- a/bo/running.po
+++ b/bo/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/bo/server.po b/bo/server.po
index 062a8a8..c3eabb7 100644
--- a/bo/server.po
+++ b/bo/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/bo/services.po b/bo/services.po
index 832858a..571bb4e 100644
--- a/bo/services.po
+++ b/bo/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/bo/troubleshooting.po b/bo/troubleshooting.po
index c5c8391..50f705a 100644
--- a/bo/troubleshooting.po
+++ b/bo/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tibetan (http://www.transifex.com/projects/p/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: bo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/br/bridges.po b/br/bridges.po
index a705e95..870af79 100644
--- a/br/bridges.po
+++ b/br/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/br/config.po b/br/config.po
index 4c6fa82..e0017e6 100644
--- a/br/config.po
+++ b/br/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/br/index.po b/br/index.po
index 383c01f..fa43b54 100644
--- a/br/index.po
+++ b/br/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/br/links.po b/br/links.po
index 7614f82..f515307 100644
--- a/br/links.po
+++ b/br/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/br/log.po b/br/log.po
index 7783f35..6f2bc5c 100644
--- a/br/log.po
+++ b/br/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/br/netview.po b/br/netview.po
index 1d51d02..81050c5 100644
--- a/br/netview.po
+++ b/br/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/br/running.po b/br/running.po
index b4981e5..8985293 100644
--- a/br/running.po
+++ b/br/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/br/server.po b/br/server.po
index 870be60..ce5c1e3 100644
--- a/br/server.po
+++ b/br/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/br/services.po b/br/services.po
index 1777c59..86c32fb 100644
--- a/br/services.po
+++ b/br/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/br/troubleshooting.po b/br/troubleshooting.po
index 8b0c239..db572c3 100644
--- a/br/troubleshooting.po
+++ b/br/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Breton (http://www.transifex.com/projects/p/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: br\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/csb/bridges.po b/csb/bridges.po
index b8cf0b2..da6b041 100644
--- a/csb/bridges.po
+++ b/csb/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/csb/config.po b/csb/config.po
index fbf0ba6..9c0614c 100644
--- a/csb/config.po
+++ b/csb/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/csb/index.po b/csb/index.po
index 6e84898..0c40d7f 100644
--- a/csb/index.po
+++ b/csb/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/csb/links.po b/csb/links.po
index dc6bbc6..519540b 100644
--- a/csb/links.po
+++ b/csb/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/csb/log.po b/csb/log.po
index 596ba3a..d98dc40 100644
--- a/csb/log.po
+++ b/csb/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/csb/netview.po b/csb/netview.po
index e39dd26..57cebef 100644
--- a/csb/netview.po
+++ b/csb/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/csb/running.po b/csb/running.po
index 10b16ce..cb51459 100644
--- a/csb/running.po
+++ b/csb/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/csb/server.po b/csb/server.po
index 005da7f..cb1721b 100644
--- a/csb/server.po
+++ b/csb/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/csb/services.po b/csb/services.po
index 4e3ceab..e5ac773 100644
--- a/csb/services.po
+++ b/csb/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/csb/troubleshooting.po b/csb/troubleshooting.po
index ab35f5c..84f0de8 100644
--- a/csb/troubleshooting.po
+++ b/csb/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Kashubian (http://www.transifex.com/projects/p/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: csb\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/dz/bridges.po b/dz/bridges.po
index 04b9cda..3973579 100644
--- a/dz/bridges.po
+++ b/dz/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/dz/config.po b/dz/config.po
index df193c6..7633b0f 100644
--- a/dz/config.po
+++ b/dz/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/dz/index.po b/dz/index.po
index 222d975..c375db4 100644
--- a/dz/index.po
+++ b/dz/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/dz/links.po b/dz/links.po
index d950867..8481ad1 100644
--- a/dz/links.po
+++ b/dz/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/dz/log.po b/dz/log.po
index bb4db32..e38e71e 100644
--- a/dz/log.po
+++ b/dz/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/dz/netview.po b/dz/netview.po
index 1541a54..919db5e 100644
--- a/dz/netview.po
+++ b/dz/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/dz/running.po b/dz/running.po
index 301c4dd..e1a4d0d 100644
--- a/dz/running.po
+++ b/dz/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/dz/server.po b/dz/server.po
index edddb30..fa0b411 100644
--- a/dz/server.po
+++ b/dz/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/dz/services.po b/dz/services.po
index d955b4f..9b6766e 100644
--- a/dz/services.po
+++ b/dz/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/dz/troubleshooting.po b/dz/troubleshooting.po
index 6991531..22b2c15 100644
--- a/dz/troubleshooting.po
+++ b/dz/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Dzongkha (http://www.transifex.com/projects/p/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: dz\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/fo/bridges.po b/fo/bridges.po
index be6b844..1d26235 100644
--- a/fo/bridges.po
+++ b/fo/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/fo/config.po b/fo/config.po
index 21e0403..d990bb8 100644
--- a/fo/config.po
+++ b/fo/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/fo/index.po b/fo/index.po
index 13bfb20..958ad2d 100644
--- a/fo/index.po
+++ b/fo/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/fo/links.po b/fo/links.po
index 02458f0..0723198 100644
--- a/fo/links.po
+++ b/fo/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/fo/log.po b/fo/log.po
index 65c9747..be9fc2e 100644
--- a/fo/log.po
+++ b/fo/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/fo/netview.po b/fo/netview.po
index 554c7fb..881a86d 100644
--- a/fo/netview.po
+++ b/fo/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/fo/running.po b/fo/running.po
index 85aa05e..670e402 100644
--- a/fo/running.po
+++ b/fo/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/fo/server.po b/fo/server.po
index e42f7be..c542496 100644
--- a/fo/server.po
+++ b/fo/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/fo/services.po b/fo/services.po
index 02e45c7..c69b955 100644
--- a/fo/services.po
+++ b/fo/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/fo/troubleshooting.po b/fo/troubleshooting.po
index 5d9d15d..49fd788 100644
--- a/fo/troubleshooting.po
+++ b/fo/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Faroese (http://www.transifex.com/projects/p/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fo\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/fur/bridges.po b/fur/bridges.po
index d37019b..788ca5c 100644
--- a/fur/bridges.po
+++ b/fur/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/fur/config.po b/fur/config.po
index e3c56f4..fab95ea 100644
--- a/fur/config.po
+++ b/fur/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/fur/index.po b/fur/index.po
index 35416de..1a203bb 100644
--- a/fur/index.po
+++ b/fur/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/fur/links.po b/fur/links.po
index bec1587..4935a98 100644
--- a/fur/links.po
+++ b/fur/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/fur/log.po b/fur/log.po
index d9d1711..5d9172f 100644
--- a/fur/log.po
+++ b/fur/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/fur/netview.po b/fur/netview.po
index 5ff5dda..f502641 100644
--- a/fur/netview.po
+++ b/fur/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/fur/running.po b/fur/running.po
index e19811e..be00331 100644
--- a/fur/running.po
+++ b/fur/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/fur/server.po b/fur/server.po
index 76bf23e..8f6a62d 100644
--- a/fur/server.po
+++ b/fur/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/fur/services.po b/fur/services.po
index a7653c7..200bdf5 100644
--- a/fur/services.po
+++ b/fur/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/fur/troubleshooting.po b/fur/troubleshooting.po
index 9db12c3..a143768 100644
--- a/fur/troubleshooting.po
+++ b/fur/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Friulian (http://www.transifex.com/projects/p/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/fy/bridges.po b/fy/bridges.po
index 181e818..cb63eb6 100644
--- a/fy/bridges.po
+++ b/fy/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/fy/config.po b/fy/config.po
index 9a78827..0ae9eb8 100644
--- a/fy/config.po
+++ b/fy/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/fy/index.po b/fy/index.po
index 3fcb745..1a6b421 100644
--- a/fy/index.po
+++ b/fy/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/fy/links.po b/fy/links.po
index 473fe1a..523784b 100644
--- a/fy/links.po
+++ b/fy/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/fy/log.po b/fy/log.po
index 155c934..4b0b46c 100644
--- a/fy/log.po
+++ b/fy/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/fy/netview.po b/fy/netview.po
index 68b3a36..e858d9e 100644
--- a/fy/netview.po
+++ b/fy/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/fy/running.po b/fy/running.po
index 2e56071..428ad13 100644
--- a/fy/running.po
+++ b/fy/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/fy/server.po b/fy/server.po
index c50d50e..5b241c4 100644
--- a/fy/server.po
+++ b/fy/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/fy/services.po b/fy/services.po
index 6f82606..ca10ba7 100644
--- a/fy/services.po
+++ b/fy/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/fy/troubleshooting.po b/fy/troubleshooting.po
index d09c497..7ff685f 100644
--- a/fy/troubleshooting.po
+++ b/fy/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Western Frisian (http://www.transifex.com/projects/p/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ga/bridges.po b/ga/bridges.po
index 3727237..69d948a 100644
--- a/ga/bridges.po
+++ b/ga/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ga/config.po b/ga/config.po
index 997c26b..5e023d5 100644
--- a/ga/config.po
+++ b/ga/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ga/index.po b/ga/index.po
index 1523b70..1f0efbd 100644
--- a/ga/index.po
+++ b/ga/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ga/links.po b/ga/links.po
index ace7c68..a7772b6 100644
--- a/ga/links.po
+++ b/ga/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ga/log.po b/ga/log.po
index 227b924..b4dad1d 100644
--- a/ga/log.po
+++ b/ga/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ga/netview.po b/ga/netview.po
index 182228b..8e8a2a1 100644
--- a/ga/netview.po
+++ b/ga/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ga/running.po b/ga/running.po
index a7b380f..034bc5f 100644
--- a/ga/running.po
+++ b/ga/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ga/server.po b/ga/server.po
index 6f0cb76..a50051c 100644
--- a/ga/server.po
+++ b/ga/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ga/services.po b/ga/services.po
index 4b9a829..eb8ffc7 100644
--- a/ga/services.po
+++ b/ga/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ga/troubleshooting.po b/ga/troubleshooting.po
index c9d7938..4d8b729 100644
--- a/ga/troubleshooting.po
+++ b/ga/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Irish (http://www.transifex.com/projects/p/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ga\n"
-"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4)\n"
+"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/gun/bridges.po b/gun/bridges.po
index 996df67..26cbfc1 100644
--- a/gun/bridges.po
+++ b/gun/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/gun/config.po b/gun/config.po
index 31fed0a..15e5bd5 100644
--- a/gun/config.po
+++ b/gun/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/gun/index.po b/gun/index.po
index ad385fa..e91b55c 100644
--- a/gun/index.po
+++ b/gun/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/gun/links.po b/gun/links.po
index 3694231..4169159 100644
--- a/gun/links.po
+++ b/gun/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/gun/log.po b/gun/log.po
index 38eac39..366fa6e 100644
--- a/gun/log.po
+++ b/gun/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/gun/netview.po b/gun/netview.po
index d35b193..93f68ab 100644
--- a/gun/netview.po
+++ b/gun/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/gun/running.po b/gun/running.po
index b0835ea..deceaf9 100644
--- a/gun/running.po
+++ b/gun/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/gun/server.po b/gun/server.po
index eea34ba..6517b92 100644
--- a/gun/server.po
+++ b/gun/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/gun/services.po b/gun/services.po
index 47cd82e..d0d3a6b 100644
--- a/gun/services.po
+++ b/gun/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/gun/troubleshooting.po b/gun/troubleshooting.po
index a54fcb7..4023c95 100644
--- a/gun/troubleshooting.po
+++ b/gun/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Gun (http://www.transifex.com/projects/p/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: gun\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ha/bridges.po b/ha/bridges.po
index 4d1e485..692e177 100644
--- a/ha/bridges.po
+++ b/ha/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ha/config.po b/ha/config.po
index 2592ed5..fc40571 100644
--- a/ha/config.po
+++ b/ha/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ha/index.po b/ha/index.po
index f0bea10..49e2ec1 100644
--- a/ha/index.po
+++ b/ha/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ha/links.po b/ha/links.po
index 34971cf..8886fb0 100644
--- a/ha/links.po
+++ b/ha/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ha/log.po b/ha/log.po
index 7c8592a..69b8e2e 100644
--- a/ha/log.po
+++ b/ha/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ha/netview.po b/ha/netview.po
index 7624b6c..fa7f330 100644
--- a/ha/netview.po
+++ b/ha/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ha/running.po b/ha/running.po
index fcc9096..7fc8c73 100644
--- a/ha/running.po
+++ b/ha/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ha/server.po b/ha/server.po
index 0edabe1..eb7d478 100644
--- a/ha/server.po
+++ b/ha/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ha/services.po b/ha/services.po
index cb3edb9..831aedc 100644
--- a/ha/services.po
+++ b/ha/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ha/troubleshooting.po b/ha/troubleshooting.po
index 9ecd42f..cb586dc 100644
--- a/ha/troubleshooting.po
+++ b/ha/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Hausa (http://www.transifex.com/projects/p/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ha\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ht/bridges.po b/ht/bridges.po
index 257fa8e..08a8fe3 100644
--- a/ht/bridges.po
+++ b/ht/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ht/config.po b/ht/config.po
index 6f6901e..f14e100 100644
--- a/ht/config.po
+++ b/ht/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ht/index.po b/ht/index.po
index 28e10a9..47e5f47 100644
--- a/ht/index.po
+++ b/ht/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ht/links.po b/ht/links.po
index 642aa88..e18c145 100644
--- a/ht/links.po
+++ b/ht/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ht/log.po b/ht/log.po
index f7275b4..6817761 100644
--- a/ht/log.po
+++ b/ht/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ht/netview.po b/ht/netview.po
index 87d65a6..76f8e0e 100644
--- a/ht/netview.po
+++ b/ht/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ht/running.po b/ht/running.po
index 59cae4e..3e9bc6e 100644
--- a/ht/running.po
+++ b/ht/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ht/server.po b/ht/server.po
index f62cd2c..afe464c 100644
--- a/ht/server.po
+++ b/ht/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ht/services.po b/ht/services.po
index fa51946..23c05f2 100644
--- a/ht/services.po
+++ b/ht/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ht/troubleshooting.po b/ht/troubleshooting.po
index a0eb202..0ff5f20 100644
--- a/ht/troubleshooting.po
+++ b/ht/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:46+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/projects/p/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ht\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/hy/bridges.po b/hy/bridges.po
index e4bb1e7..b709014 100644
--- a/hy/bridges.po
+++ b/hy/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/hy/config.po b/hy/config.po
index e8ab27e..e50a2bc 100644
--- a/hy/config.po
+++ b/hy/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/hy/index.po b/hy/index.po
index 5845c09..5314c93 100644
--- a/hy/index.po
+++ b/hy/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/hy/links.po b/hy/links.po
index a0cb430..daa29e3 100644
--- a/hy/links.po
+++ b/hy/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/hy/log.po b/hy/log.po
index b13db88..b4a0886 100644
--- a/hy/log.po
+++ b/hy/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/hy/netview.po b/hy/netview.po
index 7289814..9dd519c 100644
--- a/hy/netview.po
+++ b/hy/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/hy/running.po b/hy/running.po
index d87bd78..2e9eeeb 100644
--- a/hy/running.po
+++ b/hy/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/hy/server.po b/hy/server.po
index 447f663..b10e19a 100644
--- a/hy/server.po
+++ b/hy/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/hy/services.po b/hy/services.po
index e380418..6177622 100644
--- a/hy/services.po
+++ b/hy/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/hy/troubleshooting.po b/hy/troubleshooting.po
index eba2b3a..7e253c5 100644
--- a/hy/troubleshooting.po
+++ b/hy/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Armenian (http://www.transifex.com/projects/p/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hy\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/jv/bridges.po b/jv/bridges.po
index 042c106..5002e1f 100644
--- a/jv/bridges.po
+++ b/jv/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/jv/config.po b/jv/config.po
index 720cc25..63ad7f8 100644
--- a/jv/config.po
+++ b/jv/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/jv/index.po b/jv/index.po
index 18c41e5..43ec839 100644
--- a/jv/index.po
+++ b/jv/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/jv/links.po b/jv/links.po
index c71cd5a..44c1a0d 100644
--- a/jv/links.po
+++ b/jv/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/jv/log.po b/jv/log.po
index 2cc8624..27bf014 100644
--- a/jv/log.po
+++ b/jv/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/jv/netview.po b/jv/netview.po
index f62b902..3d51418 100644
--- a/jv/netview.po
+++ b/jv/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/jv/running.po b/jv/running.po
index 4a1e18f..3dc2ba0 100644
--- a/jv/running.po
+++ b/jv/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/jv/server.po b/jv/server.po
index e2fb1d7..e516aa1 100644
--- a/jv/server.po
+++ b/jv/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/jv/services.po b/jv/services.po
index 346ef6c..c5f384f 100644
--- a/jv/services.po
+++ b/jv/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/jv/troubleshooting.po b/jv/troubleshooting.po
index b1e0e0c..ed38556 100644
--- a/jv/troubleshooting.po
+++ b/jv/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Javanese (http://www.transifex.com/projects/p/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: jv\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/km/bridges.po b/km/bridges.po
index ec29928..b6607bb 100644
--- a/km/bridges.po
+++ b/km/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/km/config.po b/km/config.po
index edf0744..e3d42c3 100644
--- a/km/config.po
+++ b/km/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/km/index.po b/km/index.po
index 931afd6..a2b9aae 100644
--- a/km/index.po
+++ b/km/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/km/links.po b/km/links.po
index ec7c61e..30c838d 100644
--- a/km/links.po
+++ b/km/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/km/log.po b/km/log.po
index 3cc319f..9f09c5d 100644
--- a/km/log.po
+++ b/km/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/km/netview.po b/km/netview.po
index c5e9cef..373ae0a 100644
--- a/km/netview.po
+++ b/km/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/km/running.po b/km/running.po
index a95a79e..79e5758 100644
--- a/km/running.po
+++ b/km/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/km/server.po b/km/server.po
index 52e9958..262a521 100644
--- a/km/server.po
+++ b/km/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/km/services.po b/km/services.po
index 9d2cf75..122fcbd 100644
--- a/km/services.po
+++ b/km/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/km/troubleshooting.po b/km/troubleshooting.po
index 2a430f5..64becb5 100644
--- a/km/troubleshooting.po
+++ b/km/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Khmer (http://www.transifex.com/projects/p/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: km\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/kw/bridges.po b/kw/bridges.po
index f866dff..420b4c8 100644
--- a/kw/bridges.po
+++ b/kw/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/kw/config.po b/kw/config.po
index d5de1da..7046dda 100644
--- a/kw/config.po
+++ b/kw/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/kw/index.po b/kw/index.po
index fee9e9c..914d946 100644
--- a/kw/index.po
+++ b/kw/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/kw/links.po b/kw/links.po
index 84c39c8..f8e8678 100644
--- a/kw/links.po
+++ b/kw/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/kw/log.po b/kw/log.po
index 9c07dd8..bf28708 100644
--- a/kw/log.po
+++ b/kw/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/kw/netview.po b/kw/netview.po
index 4760d0d..74718e5 100644
--- a/kw/netview.po
+++ b/kw/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/kw/running.po b/kw/running.po
index 2b26552..8b3ff07 100644
--- a/kw/running.po
+++ b/kw/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/kw/server.po b/kw/server.po
index e3b301d..a17472e 100644
--- a/kw/server.po
+++ b/kw/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/kw/services.po b/kw/services.po
index f63f591..4bdbc85 100644
--- a/kw/services.po
+++ b/kw/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/kw/troubleshooting.po b/kw/troubleshooting.po
index 92fbc2f..4326b9e 100644
--- a/kw/troubleshooting.po
+++ b/kw/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Cornish (http://www.transifex.com/projects/p/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: kw\n"
-"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3\n"
+"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/lb/bridges.po b/lb/bridges.po
index dc8e4e5..5abffae 100644
--- a/lb/bridges.po
+++ b/lb/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/lb/config.po b/lb/config.po
index f3f0c2d..1083734 100644
--- a/lb/config.po
+++ b/lb/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/lb/index.po b/lb/index.po
index ba98039..c6de02e 100644
--- a/lb/index.po
+++ b/lb/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/lb/links.po b/lb/links.po
index b626501..df915fe 100644
--- a/lb/links.po
+++ b/lb/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/lb/log.po b/lb/log.po
index e9301c6..cfe0a3b 100644
--- a/lb/log.po
+++ b/lb/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/lb/netview.po b/lb/netview.po
index 171dbb6..07144ae 100644
--- a/lb/netview.po
+++ b/lb/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/lb/running.po b/lb/running.po
index 5fac2af..65c13e9 100644
--- a/lb/running.po
+++ b/lb/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/lb/server.po b/lb/server.po
index b3ad250..c7ea017 100644
--- a/lb/server.po
+++ b/lb/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/lb/services.po b/lb/services.po
index c7d59ac..99f3cf0 100644
--- a/lb/services.po
+++ b/lb/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/lb/troubleshooting.po b/lb/troubleshooting.po
index b11a287..9ca2ed0 100644
--- a/lb/troubleshooting.po
+++ b/lb/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Luxembourgish (http://www.transifex.com/projects/p/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lb\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/lg/bridges.po b/lg/bridges.po
new file mode 100644
index 0000000..3f22cac
--- /dev/null
+++ b/lg/bridges.po
@@ -0,0 +1,100 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 16:58+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/bridges.html:16
+msgid "Bridge Relays"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/bridges.html:19
+msgid "<a name=\"about\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/bridges.html:20
+msgid "What are bridge relays?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:22
+msgid ""
+"Some Internet Service Providers (ISPs) attempt to prevent users from "
+"accessing the Tor network by blocking connections to known Tor relays. "
+"Bridge relays (or <i>bridges</i> for short) are relays that help these "
+"censored users access the Tor network. Unlike other Tor relays, bridges are "
+"not listed in the same public directories as normal relays. Since there is "
+"no complete public list of them, even if your ISP is filtering connections "
+"to all the known Tor relays, they probably won't be able to block all the "
+"bridges."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/bridges.html:31
+msgid "<a name=\"finding\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/bridges.html:32
+msgid "How do I find a bridge relay?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:34
+msgid "There are two main ways to learn about a bridge address:"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/bridges.html:36
+msgid "Get some friends to run private bridges for you"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/bridges.html:37
+msgid "Use some of the public bridges"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:42
+msgid ""
+"To use private bridges, ask your friends to run Vidalia and Tor in an "
+"uncensored area of the Internet, and then click on <i>Help censored "
+"users</i> in Vidalia's <a href=\"server.html\">Relay settings page</a>. Then"
+" they should privately send you the <i>Bridge address</i> line at the bottom"
+" of their Relay page. Unlike running an exit relay, running a bridge relay "
+"just passes data to and from the Tor network, so it shouldn't expose the "
+"operator to any abuse complaints."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:52
+msgid ""
+"You can find public bridge addresses by visiting "
+"<b>https://bridges.torproject.org</b>. The answers you get from that page "
+"will change every few days, so check back periodically if you need more "
+"bridge addresses. Another way to find public bridge addresses is to send "
+"mail to <b>bridges(a)torproject.org</b> with the line <b>get bridges</b> by "
+"itself in the body of the mail. However, so we can make it harder for an "
+"attacker to learn lots of bridge addresses, you must send this request from "
+"a Gmail account."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:63
+msgid ""
+"Configuring more than one bridge address will make your Tor connection more "
+"stable, in case some of the bridges become unreachable."
+msgstr ""
diff --git a/lg/config.po b/lg/config.po
new file mode 100644
index 0000000..89289b8
--- /dev/null
+++ b/lg/config.po
@@ -0,0 +1,300 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 16:58+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/config.html:16
+msgid "Configuring Vidalia and Tor"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:20
+msgid ""
+"Vidalia allows you to configure some of the most commonly modified aspects "
+"of Vidalia and Tor. It also lets you set up and manage a <a "
+"href=\"server.html\">Tor relay</a> so you can help the Tor network grow."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:26
+msgid "<a name=\"general\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:27
+msgid "General Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:29
+msgid ""
+"Settings on the <i>General</i> page are the most commonly modified settings."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:32
+msgid ""
+"<b>Tor Executable</b>: This is the Tor executable that Vidalia will run when"
+" you select <i>Start</i> from the tray menu. If you have multiple versions "
+"of Tor installed, you can tell Vidalia which version you would like to run "
+"by clicking the <i>Browse</i> button and navigating to the particular Tor "
+"installation you want."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:39
+msgid ""
+"<b>Startup Options</b>: This setting allows you to have Vidalia "
+"automatically start Tor when Vidalia starts. You can also configure Vidalia "
+"to run when your system starts (<i>Windows only</i>)."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:46
+msgid "<a name=\"network\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:47
+msgid "Network Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:49
+msgid ""
+"The <i>Network</i> settings page lets you change how Tor connects to the Tor"
+" network."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:53
+msgid ""
+"<b>I use a proxy to access the Internet</b>: If your Internet connection "
+"requires an HTTP proxy, you can configure Tor to send all of its directory "
+"requests and Tor relay connections through your proxy. You must specify at "
+"least the hostname or address of your proxy, and the port on which your "
+"proxy is listening for connections. If your proxy requires authentication, "
+"you can also enter the <i>Username</i> and <i>Password</i> you use to "
+"connect to your proxy. Otherwise, you can leave those fields blank."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:62
+msgid ""
+"<b>My firewall only lets me connect to certain ports</b>: If you are behind "
+"a restrictive firewall or proxy that limits the ports you are able to "
+"connect to, you can configure Tor to connect directly only to relays "
+"listening on the ports allowed by your firewall or proxy. Simply enter a "
+"list of ports permitted by your firewall or proxy, separated by commas. "
+"(<i>Example: 80,443,8080</i>)"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:69
+msgid ""
+"<b>My ISP blocks connections to the Tor network</b>: If your ISP (Internet "
+"Service Provider) blocks connections to the Tor network, Tor can attempt to "
+"avoid being filtered by encrypting its directory connections and connecting "
+"to the Tor network through relays called <i>bridges</i> (Tor 0.2.0.3-alpha "
+"or newer only). You can add bridge relays by specifying either their address"
+" and port number, or their address, port number, and fingerprint."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:77
+msgid "Below are examples of valid bridge address formats:"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:80
+msgid "128.213.48.13:8080"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:83
+msgid "128.213.48.13:8080 1054 13B1 DBDA F867 B226 74D2 52DF 3D9F A367 1F73"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:86
+msgid "128.213.48.13:8080 105413B1DBDAF867B22674D252DF3D9FA3671F73"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:89
+msgid ""
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:100
+msgid "<a name=\"relay\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:101
+msgid "Relay Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:103
+msgid ""
+"<i> See <a href=\"server.html\">this help topic</a> for detailed information"
+" about setting up and managing a Tor relay. </i>"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:109
+msgid "<a name=\"appearance\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:110
+msgid "Appearance Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:112
+msgid ""
+"The settings on the <i>Appearance</i> page allow you to customize the look "
+"and feel of Vidalia."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:116
+msgid ""
+"<b>Language</b>: Vidalia's interface has been translated into many languages"
+" by helpful volunteers. When Vidalia is first run, it will try to guess "
+"which language your computer is currently using. If Vidalia guesses "
+"incorrectly, or if you prefer a different language, you can choose another "
+"language from the dropdown box. You will need to restart Vidalia after "
+"changing the displayed language for the changes to take effect."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:124
+msgid ""
+"<b>Style</b>: In most cases, Vidalia will default to using your platform's "
+"default interface style. If you dislike the default, you can choose "
+"whichever interface style you prefer from the dropdown box."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:131
+msgid "<a name=\"advanced\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:132
+msgid "Advanced Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:134
+msgid ""
+"The settings on the <i>Advanced</i> page should generally only be modified "
+"by more experienced users."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:138
+msgid ""
+"<b>Control Address & Port</b>: The <i>Control Port</i> is the port which"
+" Vidalia uses to talk to Tor. This doesn't need to be changed unless you "
+"have a conflict with another service on your machine, or if you are using "
+"Vidalia to control and monitor a Tor process running on another machine."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:144
+msgid ""
+"<b>Control Port Authentication</b>: Control port authentication is used to "
+"limit the applications on your machine that can connect to and reconfigure "
+"your Tor installation. The available authentication methods are:"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:150
+msgid ""
+"<b>None</b> -- No authentication is required. Use of this option is "
+"<b>strongly</b> discouraged. Any application or user on your computer can "
+"reconfigure your Tor installation."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:155
+msgid ""
+"<b>Password</b> <i>(Default)</i> -- If this method is selected, you can "
+"specify a password that Tor will require each time a user or application "
+"connects to Tor's control port. If Vidalia starts Tor for you, you can have "
+"Vidalia randomly generate a new password each time it starts Tor by checking"
+" the <i>Randomly Generate</i> checkbox."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:162
+msgid ""
+"<b>Cookie</b> -- If cookie authentication is selected, Tor will write a file"
+" (or, <i>cookie</i>) containing random bytes to its data directory when it "
+"starts. Any user or application that tries to connect to Tor's control port "
+"must be able to provide the contents of this cookie."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:170
+msgid ""
+"<b>Tor Configuration File</b> <i>(optional)</i>: You can use this option to "
+"have Vidalia start Tor using a specific <i>torrc</i>, Tor's configuration "
+"file. If you leave this field blank, Tor will uses its own default torrc "
+"location."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:175
+msgid ""
+"<b>Tor Data Directory</b> <i>(optional)</i>: You can specify the directory "
+"in which Tor will store its saved data, such as cached Tor relay "
+"information, Tor relay keys, and configuration files. If you leave this "
+"field blank, Tor will use its own default data directory location."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:181
+msgid ""
+"<b>Permissions</b> <i>(optional, not available on Windows)</i>: If you enter"
+" a value for <b>Run as User</b>, Tor will <i>setuid</i> to this user when it"
+" starts. If you enter a value for <b>Run as Group</b>, Tor will "
+"<i>setgid</i> to this group when it starts."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:189
+msgid "<a name=\"services\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:190
+msgid "Hidden Service Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:192
+msgid ""
+"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
+" HTTP service, to others without revealing your IP address."
+msgstr ""
diff --git a/lg/index.po b/lg/index.po
new file mode 100644
index 0000000..4636c2d
--- /dev/null
+++ b/lg/index.po
@@ -0,0 +1,46 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 16:59+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/index.html:16
+msgid "Vidalia Help"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:20
+msgid ""
+"Select a help topic from the tree on the left or click on the Search button "
+"above the list of topics to search through all available help topics."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:25
+msgid ""
+"You can use the <i>Find</i> button on the toolbar above to search within a "
+"particular help topic."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:30
+msgid "The <i>Home</i> button above will bring you back to this home page."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:34
+msgid ""
+"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
+"can visit to find additional help and information about Vidalia and Tor."
+msgstr ""
diff --git a/lg/links.po b/lg/links.po
new file mode 100644
index 0000000..dc92711
--- /dev/null
+++ b/lg/links.po
@@ -0,0 +1,79 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2011-05-05 20:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: links.html:16
+msgid "Helpful Links"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: links.html:19
+msgid "Vidalia"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:22 links.html:30 links.html:42 links.html:49 links.html:57
+msgid " "
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:23 links.html:43
+msgid "Homepage"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:25
+msgid ""
+"<a href=\"https://www.torproject.org/vidalia/\"> "
+"https://www.torproject.org/vidalia/</a>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:31 links.html:58
+msgid "Wiki and Bugtracker"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:33
+msgid "<a href=\"http://trac.torproject.org/\"> http://trac.torproject.org/</a>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: links.html:39
+msgid "Tor"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:45
+msgid "<a href=\"https://www.torproject.org/\">https://www.torproject.org/</a>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:50
+msgid "FAQ"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:52
+msgid ""
+"<a href=\"https://www.torproject.org/docs/faq.html\"> "
+"https://www.torproject.org/docs/faq.html</a>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:60
+msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
+msgstr ""
diff --git a/lg/log.po b/lg/log.po
new file mode 100644
index 0000000..841c128
--- /dev/null
+++ b/lg/log.po
@@ -0,0 +1,159 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/log.html:16
+msgid "Message Log"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/log.html:19
+msgid ""
+"The message log lets you see status information about a running Tor process."
+" <a name=\"basic\"/> Each message has a <i>severity</i> associated with it,"
+" ranging from <b>Error</b> (most serious) to <b>Debug</b> (most verbose). "
+"See the help section on <a href=\"#severities\">message severities</a> for "
+"more information. <a name=\"severities\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/log.html:28
+msgid "Message Severities"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:30
+msgid ""
+"A message's severity tells you how important the message is. A higher "
+"severity message usually indicates that something has gone wrong with Tor. "
+"Lower severity messages appear frequently during normal Tor operations and "
+"usually do not need to be logged."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:37
+msgid ""
+"The possible message severities, from most severe to least severe, are:"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:41
+msgid ""
+"<b>Error</b>: Messages that appear when something has gone very wrong and "
+"Tor cannot proceed. These messages will be highlighted in <i>red</i> in the "
+"message log."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:46
+msgid ""
+"<b>Warning</b>: Messages that only appear when something has gone wrong with"
+" Tor, but are not fatal and Tor will continue running. These messages will "
+"be highlighted in <i>yellow</i>."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:51
+msgid ""
+"<b>Notice</b>: Messages that appear infrequently during normal Tor operation"
+" and are not considered errors, but you still may care about."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:55
+msgid ""
+"<b>Info</b>: Messages that appear frequently during normal Tor operation and"
+" are not usually of interest to most users."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:59
+msgid ""
+"<b>Debug</b>: Extremely verbose messages that are primarily of interest to "
+"developers. You should generally not log debug messages unless you know what"
+" you are doing."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:66
+msgid ""
+"Most users should only log <i>Error</i>, <i>Warning</i>, and <i>Notice</i> "
+"messages."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:71
+msgid ""
+"To select which message severities you would like to see, do the following:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:73 en/log.html:92
+msgid "Open the message log from the Vidalia tray menu."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:74 en/log.html:93
+msgid "Click on <i>Settings</i> at the top of the message log window."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/log.html:76
+msgid ""
+"Check message severities you would like to see from the Message Filter group"
+" on the left and uncheck message severities you would like to hide."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/log.html:79
+msgid "Click <i>Save Settings</i> to apply your new message filter."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/log.html:84
+msgid "<a name=\"logfile\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/log.html:85
+msgid "Logging to a File"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:87
+msgid ""
+"Vidalia can also write log messages to a file, as well as logging them in "
+"the message log window. To enable logging to a file, follow these steps:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:94
+msgid ""
+"Check the box labeled <i>Automatically save new log messages to a file</i>."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:96
+msgid ""
+"If you would like to change the file to which messages will be written, "
+"either type the path and filename into the text box, or click <i>Browse</i> "
+"to navigate to a location for your log file."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:100
+msgid "Click <i>Save Settings</i> to save your log destination."
+msgstr ""
diff --git a/lg/netview.po b/lg/netview.po
new file mode 100644
index 0000000..ce5afae
--- /dev/null
+++ b/lg/netview.po
@@ -0,0 +1,247 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/netview.html:16
+msgid "Network Viewer"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:20
+msgid ""
+"The network viewer lets you see relays in the Tor network and where your "
+"traffic is going."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:25
+msgid "<a name=\"overview\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:26
+msgid "Overview"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:28
+msgid ""
+"When you want to communicate anonymously through Tor (say, connecting to a "
+"website), Tor creates a tunnel, or <i>circuit</i>, of encrypted connections "
+"through a series of relays on the network. Your application's traffic is "
+"then sent as a <i>stream</i> through that circuit. For efficiency, multiple "
+"streams may share the same circuit."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:35
+msgid "<a name=\"netmap\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:36
+msgid "Network Map"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:38
+msgid ""
+"The network map consists of a map of the world, with red pinpoints "
+"indicating the geographic location of relays in the Tor network. Green lines"
+" are drawn between relays to indicate the path of circuits that your Tor "
+"client has created through the Tor network."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:44
+msgid ""
+"You can zoom in on locations in the map by clicking the <b>Zoom In</b> and "
+"<b>Zoom Out</b> buttons in the toolbar. You can also scroll around on the "
+"map by clicking on the map and then dragging it in whatever direction you "
+"would like to move the map."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:50
+msgid ""
+"The geographic location of a Tor relay is determined by looking up the IP "
+"address of the relay in a GeoIP database, created by MaxMind and located at "
+"geoip.vidalia-project.net."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:55
+msgid ""
+"In the middle of the dialog, below the network map, you will see a list of "
+"your current circuits, as well as any application traffic currently on those"
+" circuits. When the network map first loads, you will probably see a "
+"connection to geoip.vidalia-project.net, which occurs when Vidalia is "
+"looking up geographic information for the list of Tor relays. It is "
+"important to note that this request is done through Tor, so your location is"
+" not revealed to the GeoIP relay. The results of the lookups will be cached "
+"locally in order to reduce load on Vidalia's GeoIP relays."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:66
+msgid "<a name=\"relaylist\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:67
+msgid "Relay Status"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:69
+msgid ""
+"On the left side of the network view, you will see a list of relays in the "
+"Tor network. Next to each relay is an icon indicating that relay's status. "
+"The following table summarizes the possible relay status icons:"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:78
+msgid "The relay is offline or simply not responding."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:84
+msgid ""
+"The relay is <i>hibernating</i>, meaning it is online, but has used up as "
+"much bandwidth as the operator is willing to allow for a given time period."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:92
+msgid "The relay is online, but has shown only minimal throughput."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:98
+msgid "The relay is online and has shown a throughput >= 20 KB/s."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:104
+msgid "The relay is online and has shown a throughput >= 60 KB/s."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:110
+msgid "The relay is online and has shown a throughput >= 400 KB/s."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:116
+msgid ""
+"All bandwidth values are estimates based on the minimum of either the "
+"maximum bandwidth sustained input or output over any ten second period in "
+"the past day."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:122
+msgid "<a name=\"details\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:123
+msgid "Relay Details"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:125
+msgid ""
+"The relay details panel at the right side of the screen gives you details "
+"about the relay or relays currently selected in the <a "
+"href=\"#relaylist\">relay list</a>. If you have selected a circuit or stream"
+" in the list of your current circuits and streams, this panel will show you "
+"details about each relay through which your traffic is currently being sent."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:132
+msgid ""
+"The fields that you may see in the panel are as follows (<i>Note</i>: not "
+"all of these fields will always be present):"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:138
+msgid "<b>Location</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:139
+msgid "The geographic location of this Tor relay."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:142
+msgid "<b>IP Address</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:143
+msgid "IP address at which this Tor relay can be reached."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:146
+msgid "<b>Platform</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:148
+msgid ""
+"Operating system information and Tor version on which this relay is "
+"currently running."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:153
+msgid "<b>Bandwidth</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:155
+msgid ""
+"Estimated maximum amount of bandwidth that the directory relays have seen "
+"this relay handle recently."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:160
+msgid "<b>Uptime</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:162
+msgid ""
+"Length of time this relay has been available, which can be used to help "
+"estimate this relay's stability."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:167
+msgid "<b>Last Updated</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:168
+msgid "Date this relay's information was last updated."
+msgstr ""
diff --git a/lg/running.po b/lg/running.po
new file mode 100644
index 0000000..8377c07
--- /dev/null
+++ b/lg/running.po
@@ -0,0 +1,149 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/running.html:16
+msgid "Running Tor"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:20
+msgid ""
+"Vidalia can help you control your Tor process by letting you start and stop "
+"Tor, as well as monitoring Tor's status and letting you know if it exits "
+"unexpectedly."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/running.html:25
+msgid "<a name=\"starting\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/running.html:26
+msgid "Starting and Stopping Tor"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:28
+msgid "To <i>start</i> Tor,"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:30
+msgid "Select <i>Start</i> from Vidalia's tray menu or press <i>Ctrl+S</i>"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol>
+#: en/running.html:30 en/running.html:45
+msgid "."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:32
+msgid ""
+"Vidalia's tray icon will change from an onion with a red X to a green onion "
+"when Tor has started."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:36
+msgid ""
+"If Vidalia is unable to start Tor, Vidalia will display an error message "
+"telling you what went wrong. You can also look at your <a "
+"href=\"log.html\">message log</a> to see if Tor printed any more information"
+" about what went wrong."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:43
+msgid "To <i>stop</i> Tor,"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:45
+msgid "Select <i>Stop</i> from Vidalia's tray menu or press <i>Ctrl+T</i>"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:47
+msgid ""
+"Vidalia's tray icon will change from a green onion to a gray onion with a "
+"red X when Tor has stopped."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:51
+msgid ""
+"If Vidalia was unable to stop Tor, Vidalia will display an error message "
+"telling you what went wrong. You can also look at your <a "
+"href=\"log.html\">message log</a> to see if Tor printed any more information"
+" about what went wrong."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/running.html:57
+msgid "<a name=\"monitoring\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/running.html:58
+msgid "Monitoring Tor's Status"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:60
+msgid ""
+"Vidalia tells you about the status of Tor by displaying an icon in your "
+"system tray or dock area. The following table shows the different states "
+"indicated by an icon in your system's notification area:"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:69
+msgid ""
+"Tor is stopped. Select <i>Start</i> from the Vidalia menu to start Tor."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:76
+msgid ""
+"Tor is starting up. You can check the <a href=\"log.html\">message log</a> "
+"for status information about Tor while it is starting."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:84
+msgid ""
+"Tor is running. If you want to stop Tor, select <i>Stop</i> from the Vidalia"
+" menu. Tor will print informational messages to the <a "
+"href=\"log.html\">message log</a> while it is running, if you want to see "
+"what Tor is doing."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:92
+msgid "Tor is in the process of shutting down."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:98
+msgid ""
+"If Tor exits unexpectedly, Vidalia will change its icon to the dark onion "
+"with a red X and display an error message letting you know what went wrong. "
+"You can also check the <a href=\"log.html\">message log</a> for details "
+"about any problems Tor encountered before it exited."
+msgstr ""
diff --git a/lg/server.po b/lg/server.po
new file mode 100644
index 0000000..643166e
--- /dev/null
+++ b/lg/server.po
@@ -0,0 +1,403 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/server.html:16
+msgid "Setting Up a Tor Relay"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:19
+msgid ""
+"The Tor network is made up of volunteers all over the world who donate some "
+"of their spare bandwidth by running a Tor relay. Vidalia helps you do your "
+"part by making it easy to set up a relay of your own. <a name=\"basic\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:24
+msgid "Basic Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:26
+msgid ""
+"If you decide you want to help the Tor network grow by running a relay, you "
+"can follow these steps to get started:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:31
+msgid ""
+"Open the <i>Configuration Dialog</i> by selecting <i>Settings</i> from the "
+"tray menu or <i>Preferences</i> from your system menubar on Macintosh "
+"systems."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:35
+msgid "Select the <i>Relay</i> configuration page."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:37
+msgid ""
+"Decide whether you want to run a normal Tor relay or a <i>bridge</i> relay "
+"(Tor 0.2.0.8-alpha or newer). Bridge relays help censored Tor users who are "
+"blocked from accessing the Tor network directly. Check the box labeled "
+"<i>Relay traffic for the Tor network</i> if you want to run a normal Tor "
+"relay or <i>Help censored users reach the Tor network</i> if you want to run"
+" a bridge relay."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:44
+msgid "Enter the following information:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><ul><li>
+#: en/server.html:46
+msgid ""
+"<b>Nickname</b>: The name which your relay will be known as on the Tor "
+"network. An example of a relay nickname is \"MyVidaliaRelay\"."
+msgstr ""
+
+#. type: Content of: <html><body><ol><ul><li>
+#: en/server.html:50
+msgid ""
+"<b>Contact Info</b>: Your e-mail address. This address will only be used to "
+"contact you in case there is an important Tor security update or something "
+"goes wrong with your relay. You might also include your PGP or GPG key ID "
+"and fingerprint."
+msgstr ""
+
+#. type: Content of: <html><body><ol><ul><li>
+#: en/server.html:56
+msgid ""
+"<b>Relay Port</b>: The port on which your relay will listen for traffic from"
+" clients or other Tor relays."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:62
+msgid ""
+"If you would like to mirror Tor's directory of relays for others on the "
+"network you can check the box labeled <i>Mirror the Relay Directory</i>. If"
+" you do not have much bandwidth, uncheck this box. If you do decide to "
+"mirror the relay directory, make sure the <i>Directory Port</i> is different"
+" than the <i>Relay port</i> you entered above. Bridge relays <i>must</i> "
+"mirror the relay directory."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:71
+msgid "<a name=\"bandwidth\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:72
+msgid "Bandwidth Limits"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:74
+msgid ""
+"Running a Tor relay can consume a large amount of bandwidth; however, Tor "
+"allows you to limit the amount of bandwidth that you are willing to "
+"contribute to the Tor network. You can run a relay, while still keeping your"
+" network connection usable for your own use."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:80
+msgid ""
+"You should select the option in the dropdown box that best matches your "
+"connection speed. If you select <i>Custom</i>, you will be able to specify "
+"your own limits."
+msgstr ""
+
+#. type: Content of: <html><body><h4>
+#: en/server.html:84
+msgid "Custom Limits"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:86
+msgid ""
+"The <i>maximum rate</i> is a pool of bytes used to fulfill requests during "
+"short periods of traffic higher than your specified <i>average rate</i>, but"
+" still maintains the average over a long period. A low average rate but a "
+"high maximum rate enforces a long-term average while still allowing more "
+"traffic during peak times if the average hasn't been reached lately. If your"
+" average rate is the same as your <i>maximum rate</i>, then Tor will never "
+"exceed the specified rate. Your <i>maximum rate</i> must always be greater "
+"than or equal to your <i>average rate</i>."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:96
+msgid ""
+"The <i>average rate</i> is the maximum long-term average bandwidth allowed "
+"(in kilobytes per second). For example, you might want to choose 2 megabytes"
+" per second (2048 KB/s), or 50 kilobytes per second (a medium-speed cable "
+"connection). Tor requires a minimum of 20 kilobytes per second to run a "
+"relay."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:103
+msgid ""
+"It is important to remember that Tor measures bandwidth in <b>bytes</b>, not"
+" bits. Also, Tor only looks at incoming bytes instead of outgoing bytes. For"
+" example, if your relay acts as a directory mirror, you may be sending more "
+"outgoing bytes than incoming. If you find this is the case and is putting "
+"too much strain on your bandwidth, you should consider unchecking the "
+"checkbox labeled <i>Mirror the relay directory</i>."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:111
+msgid "<a name=\"exitpolicy\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:112
+msgid "Exit Policies"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:114
+msgid ""
+"Exit policies give you a way to specify what kinds of resources on the "
+"Internet you are willing let other Tor users access from your Tor relay. "
+"Tor uses a default list of exit policies that restrict some services, such "
+"as mail to prevent spam and some default file sharing ports to reduce abuse "
+"of the Tor network."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:121
+msgid ""
+"Each of the checkboxes represents a type of resource that you can allow Tor "
+"users to access through your relay. If you uncheck the box next to a "
+"particular type of resource, Tor users will not be allowed to access that "
+"resource from your relay. If the box labeled <i>Misc Other Services</i> is "
+"checked, Tor users will be able to access other services not covered by the "
+"other checkboxes or Tor's default exit policy."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:130
+msgid ""
+"For completeness, the following table lists the specific port numbers "
+"represented by each of the exit policy checkboxes. The <b>Description</b> "
+"column describes the resources Tor clients will be allowed to access through"
+" your relay, if the associated box is checked."
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:138
+msgid "<b>Checkbox</b>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:139
+msgid "<b>Ports</b>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:140
+msgid "<b>Description</b>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:143
+msgid "Websites"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:144
+msgid "80"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:145
+msgid "Normal, unencrypted Web browsing"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:148
+msgid "Secure Websites (SSL)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:149
+msgid "443"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:150
+msgid "Encrypted Web browsing"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:153
+msgid "Retrieve Mail (POP, IMAP)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:154
+msgid "110, 143, 993, 995"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:155
+msgid "Downloading email (does not permit sending email)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:158
+msgid "Instant Messaging (IM)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:159
+msgid "703, 1863, 5050, 5190, 5222, 5223, 8300, 8888"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:160
+msgid ""
+"Instant messaging applications like MSN Messenger, AIM, ICQ, and Jabber"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:163
+msgid "Internet Relay Chat (IRC)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:164
+msgid "6660-6669, 6697, 7000-7001"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:165
+msgid "IRC clients and servers"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:168
+msgid "Misc. Other Services"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:169
+msgid "*"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:170
+msgid "All other applications that aren't covered by the previous checkboxes"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:175
+msgid ""
+"If you do not want to let other Tor users make connections outside the Tor "
+"network from your relay, you can uncheck all of the checkboxes. Even if you "
+"uncheck all of the checkboxes, your relay is still useful to the Tor "
+"network. Your relay will allow other Tor users to connect to the Tor "
+"network and will help relay traffic between other Tor relays."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:182
+msgid ""
+"If you chose to run a bridge relay, the <i>Exit Policies</i> tab will be "
+"grayed out, since bridge relays do not allow exit connections. Bridges are "
+"only used by Tor clients to connect to the Tor network."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:188
+msgid "<a name=\"upnp\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:189
+msgid "Port Forwarding"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:191
+msgid ""
+"Many home users connect to the Internet via a <i>router</i>, which allows "
+"multiple computers on a local network to share the same Internet connection."
+" Some users may also be behind a <i>firewall</i> that blocks incoming "
+"connections to your computer from other computers on the Internet. If you "
+"want to run a Tor relay, however, other Tor clients and relays must be able "
+"to connect to your relay through your home router or firewall."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:200
+msgid ""
+"To make your relay publicly accessible, your router or firewall needs to "
+"know which ports to allow through to your computer by setting up what is "
+"known as <i>port forwarding</i>. Port forwarding configures your router or "
+"firewall to \"forward\" all connections to certain ports on your router or "
+"firewall to local ports on your computer."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:208
+msgid ""
+"If you check the box labeled <i>Attempt to automatically configure port "
+"forwarding</i>, Vidalia will attempt to automatically set up port forwarding"
+" on your local network connection so that other Tor clients can connect to "
+"your relay. Not all routers support automatic port forwarding, though. You "
+"can use the <i>Test</i> button next to the checkbox to find out if Vidalia "
+"is able to automatically set up port forwarding for you."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:217
+msgid ""
+"If the <i>Test</i> button finds that Vidalia is unable to set up port "
+"forwarding for you, you may need to enable this feature on your router or "
+"set up port forwarding manually. Some network devices have a feature called "
+"<i>Universal Plug-and-Play</i> (UPnP). If you can access your router's "
+"administrative interface, you should look for an option to enable UPnP. The "
+"administrative interface for most routers can be accessed by opening <a "
+"href=\"http://192.168.0.1/\">http://192.168.0.1</a> or <a "
+"href=\"http://192.168.1.1/\">http://192.168.1.1</a> in your Web browser. You"
+" should consult your router's instruction manual for more information."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:229
+msgid ""
+"If you need to set up port forwarding manually, the website <a "
+"href=\"http://www.portforward.com/english/routers/port_forwarding/routerindex.htm\">"
+" portforward.com</a> has instructions for how to set up port forwarding for "
+"many types of routers and firewalls. At a minimum, you will need to forward "
+"your <i>Relay Port</i>, which defaults to port 443 on Windows and 9001 on "
+"all other operating systems. If you also checked the checkbox labeled "
+"<i>Mirror the relay directory</i>, then you will also need to forward your "
+"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
+"default on all operating systems."
+msgstr ""
diff --git a/lg/services.po b/lg/services.po
new file mode 100644
index 0000000..f927001
--- /dev/null
+++ b/lg/services.po
@@ -0,0 +1,246 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/services.html:16
+msgid "Hidden Services"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:19
+msgid ""
+"Remark: Support for hidden services is new in Vidalia. You should expect it "
+"to have bugs, some of which possibly corrupting your hidden service "
+"configuration. So, don't rely on it, or rather, don't blame us if something "
+"goes wrong. If you find bugs or have comments on this new feature, please "
+"let us know! We need your feedback. <a name=\"about\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:26
+msgid "What is a hidden service?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:28
+msgid ""
+"Hidden services allow you to provide any kind of TCP-based service, e.g. an "
+"HTTP service, to others without revealing your IP address. The protocol to "
+"provide a hidden service is built on top of the same circuits that Tor uses "
+"for anonymous browsing and roughly has similar anonymity properties."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:35
+msgid ""
+"For more information on hidden service you may want to read section 5 of "
+"Tor's design paper (doc/design-paper/tor-design.pdf) or the Rendezvous "
+"Specification (doc/spec/rend-spec.txt)."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:40
+msgid "<a name=\"provide\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:41
+msgid "How do I provide a hidden service?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:43
+msgid "Providing a hidden service consists of at least two steps:"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/services.html:45
+msgid ""
+"Install a web server locally (or a server for whatever service you want to "
+"provide, e.g. IRC) to listen for local requests."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/services.html:47
+msgid ""
+"Configure your hidden service, so that Tor relays requests coming from Tor "
+"users to your local server."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:50
+msgid ""
+"There is a fine tutorial on the Tor website (https://www.torproject.org/docs"
+"/tor-hidden-service.html) that describes these steps in more detail."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:55
+msgid "<a name=\"data\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:56
+msgid "What data do I need to provide?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:58
+msgid ""
+"The services table contains five columns containing data about configured "
+"hidden services:"
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:61
+msgid ""
+"Onion Address (generated): The service (or onion) address is generated by "
+"Tor to uniquely identify your service. Give this onion address to the people"
+" who shall be able to access your service. You may use the \"Copy to "
+"clipboard\" button for that to avoid typos. If you have just created a "
+"hidden service, the field says \"[Created by Tor]\"; in order to make it "
+"display the real onion address, you need to save your configuration and re-"
+"open the settings window."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:68
+msgid ""
+"Virtual Port (required): This is the TCP port that clients will need to know"
+" in order to access your service. Typically, you will want to use the "
+"service-specific port here, e.g. port 80 for HTTP. Note that the virtual "
+"port usually has nothing to do with firewall settings, because it is only "
+"used Tor-internally."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:73
+msgid ""
+"Target (optional): Usually you want Tor to relay connection requests to "
+"localhost on a different port than the one you specified in \"Virtual "
+"Port\". Therefore, you can specify a target consisting of physical address "
+"and port to which requests to your hidden service are redirected, e.g. to "
+"localhost:5222 (or on whatever port your server is listening). If you don't "
+"specify any target, Tor will redirect requests to the port specified in "
+"\"Virtual Port\" on localhost."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:81
+msgid ""
+"Service Directory (required): Tor needs to store some hidden-service "
+"specific files in a separate directory, e.g. a private key and a hostname "
+"file containing the onion address. This directory should be distinct from a "
+"directory containing content that the service provides. A good place for a "
+"service directory might be a sub directory in Tor's data directory. -- Note "
+"that you cannot change the directory of a running service (it wouldn't make "
+"much sense to allow it, because Vidalia is not supposed to move directories "
+"on your hard disk!). If you want to move a hidden service to another "
+"directory, please proceed as follows: Start by disabling the service in "
+"Vidalia and save the configuration. Then move the directory on your hard "
+"disk to the new place. Finally, change the directory in Vidalia to the new "
+"location, enable the service again, and save the new configuration."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:95
+msgid ""
+"Enabled: If this checkbox is disabled, Vidalia will not configure the given "
+"hidden service in Tor. This can be useful for keeping the configuration of a"
+" currently unused service for later use. All non-enabled services are stored"
+" in the Vidalia-specific configuration file vidalia.conf."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:103
+msgid "<a name=\"buttons\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:104
+msgid "What are the five buttons used for?"
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:107
+msgid "Add service: Creates a new empty service configuration."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:108
+msgid ""
+"Remove service: Permanently removes a hidden service configuration. (If you"
+" want to temporarily remove a service, uncheck its Enabled checkbox.)"
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:111
+msgid ""
+"Copy to clipboard: Copies the onion address to the clipboard, so that you "
+"can tell it to whoever shall be able to use your service."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:114
+msgid "Browse: Lets you browse to find a local hidden service directory."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:119
+msgid "<a name=\"advanced\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:120
+msgid "How can I configure advanced hidden service settings?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:122
+msgid ""
+"Tor allows configuration of more specific settings for hidden services, e.g."
+" forcing to use (or avoiding) certain nodes as introduction points, or "
+"providing multiple virtual ports for the same service."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:128
+msgid ""
+"However, we decided to simplify things in Vidalia and provide only the most "
+"common settings. If you want to configure advanced settings, you need to do "
+"so in Tor's torrc file. Vidalia will not remove those settings even when you"
+" are editing your hidden services. If you specify more than one virtual "
+"port, only the first will be displayed and be editable."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:135
+msgid "<a name=\"client\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:136
+msgid "How does Vidalia help me to access other hidden services?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:138
+msgid ""
+"Not at all. There is no need to do so. If you want to access another hidden "
+"service, type the service's onion address in your browser (or appropriate "
+"client application if it's not a web service), and Tor does the rest for "
+"you. There is no need to specifically configure Tor for that."
+msgstr ""
diff --git a/lg/troubleshooting.po b/lg/troubleshooting.po
new file mode 100644
index 0000000..3353b3e
--- /dev/null
+++ b/lg/troubleshooting.po
@@ -0,0 +1,243 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-08-03 15:49-0300\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Ganda (http://www.transifex.com/projects/p/torproject/language/lg/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: lg\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+# type: Content of: <html><body><h1>
+#: en/troubleshooting.html:16
+msgid "Troubleshooting"
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:19
+msgid ""
+"Listed below are some of the common problems or questions people have while "
+"running Tor. If you can't find anything about the particular problem you're "
+"having, check out our website at <i>www.vidalia-project.net</i> for more "
+"support and information. <a name=\"start\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:25
+msgid "I Can't Start Tor"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:27
+msgid ""
+"The most likely reason that Vidalia could not start Tor is because Vidalia "
+"is looking for your Tor installation in the wrong directory. You can tell "
+"Vidalia where Tor is located by updating the <i>Tor Executable</i> option in"
+" the <a href=\"config.html#general\">general configuration settings</a>."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:33
+msgid ""
+"Another possible reason that Tor cannot start is because there is already "
+"another Tor process running. Check your list of running process and stop the"
+" previous Tor process, if you find one. Then, try running Tor again."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:38
+msgid ""
+"If that did not help, check your <a href=\"log.html\">message log</a> to see"
+" if Tor printed any information about errors it encountered while trying to "
+"start."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:43
+msgid "<a name=\"connect\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:44
+msgid "Vidalia Can't Connect to Tor"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:46
+msgid ""
+"Vidalia manages Tor by communicating with it via Tor's <i>control port</i>."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:49
+msgid ""
+"The most common reason that Vidalia cannot connect to Tor is because Tor "
+"started, but encountered an error and exited immediately. You should check "
+"your <a href=\"log.html\">message log</a> to see if Tor reported any errors "
+"while it started."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:55
+msgid ""
+"If Tor is listening on a different port than Vidalia expects, Vidalia will "
+"be unable to connect to Tor. You rarely need to change this setting, but if "
+"there is another service running on your machine that conflicts with Tor's "
+"control port, you will need to specify a different port. You can change this"
+" setting in Vidalia's <a href=\"config.html#advanced\">advanced "
+"configuration settings</a>."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:63
+msgid "<a name=\"password\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:64
+msgid "Why is Vidalia asking me for a \"control password\"?"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:66
+msgid ""
+"Vidalia interacts with the Tor software via Tor's \"control port\". The "
+"control port lets Vidalia receive status updates from Tor, request a new "
+"identity, configure Tor's settings, etc. Each time Vidalia starts Tor, "
+"Vidalia sets a random password for Tor's control port to prevent other "
+"applications from also connecting to the control port and potentially "
+"compromising your anonymity."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:75
+msgid ""
+"Usually this process of generating and setting a random control password "
+"happens in the background. There are three common situations, though, where "
+"Vidalia may prompt you for a password:"
+msgstr ""
+
+# type: Content of: <html><body><ul><li>
+#: en/troubleshooting.html:82
+msgid ""
+"You're already running Vidalia and Tor. For example, this situation can "
+"happen if you installed the Vidalia bundle and now you're trying to run the "
+"Tor Browser Bundle. In that case, you'll need to close the old Vidalia and "
+"Tor before you can run this one."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:89
+msgid ""
+"Vidalia crashed, but left Tor running with the last known random password. "
+"After you restart Vidalia, it generates a new random password, but Vidalia "
+"can't talk to Tor, because the random passwords are different."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:94
+msgid ""
+"If the dialog that prompts you for a control password has a <i>Reset</i> "
+"button, you can click the button and Vidalia will restart Tor with a new "
+"random control password."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:99
+msgid ""
+"If you do not see a <i>Reset</i> button, or if Vidalia is unable to restart "
+"Tor for you, you can still fix the problem manually. Simply go into your "
+"process or task manager, and terminate the Tor process. Then use Vidalia to "
+"restart Tor and all will work again."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:106
+msgid ""
+"You had previously set Tor to run as a service. When Tor is set to run as a "
+"service, it starts up when the system boots. If you configured Tor to start "
+"as a service through Vidalia, a random password was set and saved in Tor. "
+"When you reboot, Tor starts up and uses the random password it saved. You "
+"login and start up Vidalia. Vidalia attempts to talk to the already running "
+"Tor. Vidalia generates a random password, but it is different than the saved"
+" password in the Tor service."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:114
+msgid ""
+"You need to reconfigure Tor to not be a service. See the Tor wiki page on "
+"running <a "
+"href=\"https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#WinNTService\">"
+" Tor as a service</a> for more information on how to remove the Tor service."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:122
+msgid "<a name=\"torexited\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:123
+msgid "Tor Exited Unexpectedly"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:125
+msgid ""
+"If Tor exits immediately after trying to start, you most likely have another"
+" Tor process already running. Check the <a href=\"log.html\">message log</a>"
+" to see if any of the last few messages in the list are highlighted in "
+"yellow and contain a message similar to the following:"
+msgstr ""
+
+# type: Content of: <html><body><pre>
+#: en/troubleshooting.html:131
+#, no-wrap
+msgid ""
+"connection_create_listener(): Could not bind to 127.0.0.1:9050: Address already in use. \n"
+"Is Tor already running?\n"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:135
+msgid ""
+"If you find an error message like the one above, you will need to stop the "
+"other Tor process before starting a new one with Vidalia. On Windows, you "
+"would need to look for <i>tor.exe</i> in your Task Manager. On most other "
+"operating systems, the <i>ps</i> command can help you find the other Tor "
+"process."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:141
+msgid ""
+"If Tor had been running successfully for awhile (that is, longer than a few "
+"seconds), then you should check the <a href=\"log.html\">message log</a> for"
+" information about any errors Tor experienced before it exited. Such errors "
+"will be highlighted in either red or yellow."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:147
+msgid "<a name=\"stop\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:148
+msgid "Vidalia Can't Stop Tor"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:150
+msgid ""
+"If Vidalia cannot stop Tor, you should check your <a "
+"href=\"log.html\">message log</a> to see if Tor reported any errors while "
+"trying to exit."
+msgstr ""
diff --git a/ln/bridges.po b/ln/bridges.po
index d01407f..8b9fc3d 100644
--- a/ln/bridges.po
+++ b/ln/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ln/config.po b/ln/config.po
index fb51844..8244799 100644
--- a/ln/config.po
+++ b/ln/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ln/index.po b/ln/index.po
index 56638a9..fa13e9d 100644
--- a/ln/index.po
+++ b/ln/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ln/links.po b/ln/links.po
index 6f376f4..b1547e1 100644
--- a/ln/links.po
+++ b/ln/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ln/log.po b/ln/log.po
index 823e16b..6a62e94 100644
--- a/ln/log.po
+++ b/ln/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ln/netview.po b/ln/netview.po
index 2069a9a..806844a 100644
--- a/ln/netview.po
+++ b/ln/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ln/running.po b/ln/running.po
index 0a2e592..06d815f 100644
--- a/ln/running.po
+++ b/ln/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ln/server.po b/ln/server.po
index 392855f..a14644d 100644
--- a/ln/server.po
+++ b/ln/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ln/services.po b/ln/services.po
index 67aa113..5cb666d 100644
--- a/ln/services.po
+++ b/ln/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ln/troubleshooting.po b/ln/troubleshooting.po
index ef1c7b2..59c04db 100644
--- a/ln/troubleshooting.po
+++ b/ln/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lingala (http://www.transifex.com/projects/p/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ln\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/lo/bridges.po b/lo/bridges.po
index 02eb25e..d6f96ec 100644
--- a/lo/bridges.po
+++ b/lo/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/lo/config.po b/lo/config.po
index 05f927f..7f2bfe2 100644
--- a/lo/config.po
+++ b/lo/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/lo/index.po b/lo/index.po
index 205ee6a..d627ca7 100644
--- a/lo/index.po
+++ b/lo/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/lo/links.po b/lo/links.po
index 199c733..74ff94e 100644
--- a/lo/links.po
+++ b/lo/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/lo/log.po b/lo/log.po
index 3452ac7..7b7e393 100644
--- a/lo/log.po
+++ b/lo/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/lo/netview.po b/lo/netview.po
index 3f5aa34..75b5e81 100644
--- a/lo/netview.po
+++ b/lo/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/lo/running.po b/lo/running.po
index eb687a1..73f2216 100644
--- a/lo/running.po
+++ b/lo/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/lo/server.po b/lo/server.po
index 54497f3..3554860 100644
--- a/lo/server.po
+++ b/lo/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/lo/services.po b/lo/services.po
index 612ffde..b1ea024 100644
--- a/lo/services.po
+++ b/lo/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/lo/troubleshooting.po b/lo/troubleshooting.po
index ecda5c2..d2b2411 100644
--- a/lo/troubleshooting.po
+++ b/lo/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Lao (http://www.transifex.com/projects/p/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: lo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/mg/bridges.po b/mg/bridges.po
index 4243242..66407ba 100644
--- a/mg/bridges.po
+++ b/mg/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/mg/config.po b/mg/config.po
index ef56493..adc893c 100644
--- a/mg/config.po
+++ b/mg/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/mg/index.po b/mg/index.po
index 416a245..5e3ff5c 100644
--- a/mg/index.po
+++ b/mg/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/mg/links.po b/mg/links.po
index 269a9cd..9a5edf3 100644
--- a/mg/links.po
+++ b/mg/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/mg/log.po b/mg/log.po
index b468515..52ba573 100644
--- a/mg/log.po
+++ b/mg/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/mg/netview.po b/mg/netview.po
index 7b2ec72..f13265a 100644
--- a/mg/netview.po
+++ b/mg/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/mg/running.po b/mg/running.po
index e5bd346..9e2f29e 100644
--- a/mg/running.po
+++ b/mg/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/mg/server.po b/mg/server.po
index 8437c1e..3e18fb3 100644
--- a/mg/server.po
+++ b/mg/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/mg/services.po b/mg/services.po
index 52e2ddb..1e7742f 100644
--- a/mg/services.po
+++ b/mg/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/mg/troubleshooting.po b/mg/troubleshooting.po
index 1b612ec..1accf3b 100644
--- a/mg/troubleshooting.po
+++ b/mg/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malagasy (http://www.transifex.com/projects/p/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mg\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/mi/bridges.po b/mi/bridges.po
index 0f3aaef..f8cce3f 100644
--- a/mi/bridges.po
+++ b/mi/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/mi/config.po b/mi/config.po
index b03b423..a887704 100644
--- a/mi/config.po
+++ b/mi/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/mi/index.po b/mi/index.po
index ba4238b..43205f9 100644
--- a/mi/index.po
+++ b/mi/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/mi/links.po b/mi/links.po
index 223c2e7..261b336 100644
--- a/mi/links.po
+++ b/mi/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/mi/log.po b/mi/log.po
index b71074b..df20af5 100644
--- a/mi/log.po
+++ b/mi/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/mi/netview.po b/mi/netview.po
index 0fc024f..f54307f 100644
--- a/mi/netview.po
+++ b/mi/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/mi/running.po b/mi/running.po
index e17e624..29c47cb 100644
--- a/mi/running.po
+++ b/mi/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/mi/server.po b/mi/server.po
index 42a7528..ea89e56 100644
--- a/mi/server.po
+++ b/mi/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/mi/services.po b/mi/services.po
index 61e9bbc..eb7cccd 100644
--- a/mi/services.po
+++ b/mi/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/mi/troubleshooting.po b/mi/troubleshooting.po
index b9ff066..4938e7f 100644
--- a/mi/troubleshooting.po
+++ b/mi/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maori (http://www.transifex.com/projects/p/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mi\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ml/bridges.po b/ml/bridges.po
index 7d36b37..a29b6ae 100644
--- a/ml/bridges.po
+++ b/ml/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ml/config.po b/ml/config.po
index e2321db..b4de073 100644
--- a/ml/config.po
+++ b/ml/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ml/index.po b/ml/index.po
index 91b9e66..e382eee 100644
--- a/ml/index.po
+++ b/ml/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ml/links.po b/ml/links.po
index 05a3a0e..0eabe18 100644
--- a/ml/links.po
+++ b/ml/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ml/log.po b/ml/log.po
index 6edc8c5..21fa0f6 100644
--- a/ml/log.po
+++ b/ml/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ml/netview.po b/ml/netview.po
index b89d591..350cab6 100644
--- a/ml/netview.po
+++ b/ml/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ml/running.po b/ml/running.po
index b45356c..d5e95c0 100644
--- a/ml/running.po
+++ b/ml/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ml/server.po b/ml/server.po
index efe8ec6..2ebaba3 100644
--- a/ml/server.po
+++ b/ml/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ml/services.po b/ml/services.po
index 55cc511..cf9d476 100644
--- a/ml/services.po
+++ b/ml/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ml/troubleshooting.po b/ml/troubleshooting.po
index 68e7cb9..4ac640b 100644
--- a/ml/troubleshooting.po
+++ b/ml/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Malayalam (http://www.transifex.com/projects/p/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ml\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/mn/bridges.po b/mn/bridges.po
index 391bfbc..9c57ed0 100644
--- a/mn/bridges.po
+++ b/mn/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/mn/config.po b/mn/config.po
index da59494..1b50d62 100644
--- a/mn/config.po
+++ b/mn/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/mn/index.po b/mn/index.po
index c3e6d2d..ceefd30 100644
--- a/mn/index.po
+++ b/mn/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/mn/links.po b/mn/links.po
index 72b4cdb..72695ba 100644
--- a/mn/links.po
+++ b/mn/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/mn/log.po b/mn/log.po
index 8124bfe..5a0e209 100644
--- a/mn/log.po
+++ b/mn/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/mn/netview.po b/mn/netview.po
index 0180970..222c9b5 100644
--- a/mn/netview.po
+++ b/mn/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/mn/running.po b/mn/running.po
index be93ce6..45ede76 100644
--- a/mn/running.po
+++ b/mn/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/mn/server.po b/mn/server.po
index 3cd407c..fd46d62 100644
--- a/mn/server.po
+++ b/mn/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/mn/services.po b/mn/services.po
index 97a629f..5a27c4d 100644
--- a/mn/services.po
+++ b/mn/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/mn/troubleshooting.po b/mn/troubleshooting.po
index c3d6705..b8ebe33 100644
--- a/mn/troubleshooting.po
+++ b/mn/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Mongolian (http://www.transifex.com/projects/p/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/mt/bridges.po b/mt/bridges.po
index 1c82c69..1091414 100644
--- a/mt/bridges.po
+++ b/mt/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/mt/config.po b/mt/config.po
index 41045d3..3eef340 100644
--- a/mt/config.po
+++ b/mt/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/mt/index.po b/mt/index.po
index 1db48d3..ec4a816 100644
--- a/mt/index.po
+++ b/mt/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/mt/links.po b/mt/links.po
index 86d807d..c8e5676 100644
--- a/mt/links.po
+++ b/mt/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/mt/log.po b/mt/log.po
index cbb09fa..baa6519 100644
--- a/mt/log.po
+++ b/mt/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/mt/netview.po b/mt/netview.po
index 0866f6c..20a7c35 100644
--- a/mt/netview.po
+++ b/mt/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/mt/running.po b/mt/running.po
index 91b85f8..2046068 100644
--- a/mt/running.po
+++ b/mt/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/mt/server.po b/mt/server.po
index fb6f743..81f00f7 100644
--- a/mt/server.po
+++ b/mt/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/mt/services.po b/mt/services.po
index 2c44096..f3969e2 100644
--- a/mt/services.po
+++ b/mt/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/mt/troubleshooting.po b/mt/troubleshooting.po
index 0734688..26d3aa1 100644
--- a/mt/troubleshooting.po
+++ b/mt/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Maltese (http://www.transifex.com/projects/p/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: mt\n"
-"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3)\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/nah/bridges.po b/nah/bridges.po
index f3ea192..fa9d162 100644
--- a/nah/bridges.po
+++ b/nah/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/nah/config.po b/nah/config.po
index edfcdc1..1273dbc 100644
--- a/nah/config.po
+++ b/nah/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/nah/index.po b/nah/index.po
index fc81f5d..e73ccbf 100644
--- a/nah/index.po
+++ b/nah/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/nah/links.po b/nah/links.po
index 5820643..9f61895 100644
--- a/nah/links.po
+++ b/nah/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/nah/log.po b/nah/log.po
index b9e284d..7593110 100644
--- a/nah/log.po
+++ b/nah/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/nah/netview.po b/nah/netview.po
index 1e39978..c5a9174 100644
--- a/nah/netview.po
+++ b/nah/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/nah/running.po b/nah/running.po
index 6a67eed..996125e 100644
--- a/nah/running.po
+++ b/nah/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/nah/server.po b/nah/server.po
index e3887f8..0268c27 100644
--- a/nah/server.po
+++ b/nah/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/nah/services.po b/nah/services.po
index 059fdc0..2960327 100644
--- a/nah/services.po
+++ b/nah/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/nah/troubleshooting.po b/nah/troubleshooting.po
index ece0b59..1881ae3 100644
--- a/nah/troubleshooting.po
+++ b/nah/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nahuatl (http://www.transifex.com/projects/p/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nah\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/nap/bridges.po b/nap/bridges.po
index 3d0539b..c42e812 100644
--- a/nap/bridges.po
+++ b/nap/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/nap/config.po b/nap/config.po
index 319f63e..c99ef67 100644
--- a/nap/config.po
+++ b/nap/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/nap/index.po b/nap/index.po
index 802c33a..6a128e6 100644
--- a/nap/index.po
+++ b/nap/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/nap/links.po b/nap/links.po
index 1e22850..ce2ae65 100644
--- a/nap/links.po
+++ b/nap/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/nap/log.po b/nap/log.po
index d77b800..644d526 100644
--- a/nap/log.po
+++ b/nap/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/nap/netview.po b/nap/netview.po
index 8d4d6f6..d78ccc6 100644
--- a/nap/netview.po
+++ b/nap/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/nap/running.po b/nap/running.po
index 0316642..b65ae36 100644
--- a/nap/running.po
+++ b/nap/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/nap/server.po b/nap/server.po
index ead401c..94cd941 100644
--- a/nap/server.po
+++ b/nap/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/nap/services.po b/nap/services.po
index 0b0b739..a9cd499 100644
--- a/nap/services.po
+++ b/nap/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/nap/troubleshooting.po b/nap/troubleshooting.po
index a2b2b74..1656cb8 100644
--- a/nap/troubleshooting.po
+++ b/nap/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Neapolitan (http://www.transifex.com/projects/p/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ne/bridges.po b/ne/bridges.po
index 2923de0..4a47440 100644
--- a/ne/bridges.po
+++ b/ne/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ne/config.po b/ne/config.po
index 97b0b75..0e2d3ad 100644
--- a/ne/config.po
+++ b/ne/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ne/index.po b/ne/index.po
index 105a967..361c074 100644
--- a/ne/index.po
+++ b/ne/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ne/links.po b/ne/links.po
index 8c4935d..2a2bbd7 100644
--- a/ne/links.po
+++ b/ne/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ne/log.po b/ne/log.po
index 496cea0..bf11791 100644
--- a/ne/log.po
+++ b/ne/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ne/netview.po b/ne/netview.po
index a98f1ac..9aa6504 100644
--- a/ne/netview.po
+++ b/ne/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ne/running.po b/ne/running.po
index b55bbf1..baf3fef 100644
--- a/ne/running.po
+++ b/ne/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ne/server.po b/ne/server.po
index 27a6eb0..a0b3d86 100644
--- a/ne/server.po
+++ b/ne/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ne/services.po b/ne/services.po
index b969a80..d8c6854 100644
--- a/ne/services.po
+++ b/ne/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ne/troubleshooting.po b/ne/troubleshooting.po
index de7f4a9..341cbff 100644
--- a/ne/troubleshooting.po
+++ b/ne/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Nepali (http://www.transifex.com/projects/p/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ne\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/nn/bridges.po b/nn/bridges.po
index e1030bd..f822f16 100644
--- a/nn/bridges.po
+++ b/nn/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/nn/config.po b/nn/config.po
index 815e1ac..1d5b2ff 100644
--- a/nn/config.po
+++ b/nn/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/nn/index.po b/nn/index.po
index 7ee4be2..1c15a51 100644
--- a/nn/index.po
+++ b/nn/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/nn/links.po b/nn/links.po
index 9afef08..c6c187f 100644
--- a/nn/links.po
+++ b/nn/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/nn/log.po b/nn/log.po
index d89ce82..ab8447c 100644
--- a/nn/log.po
+++ b/nn/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/nn/netview.po b/nn/netview.po
index 075c3d6..ca9f732 100644
--- a/nn/netview.po
+++ b/nn/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/nn/running.po b/nn/running.po
index 0329a17..5e58003 100644
--- a/nn/running.po
+++ b/nn/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/nn/server.po b/nn/server.po
index 8088ca6..e8be884 100644
--- a/nn/server.po
+++ b/nn/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/nn/services.po b/nn/services.po
index 7714347..ec1c7e6 100644
--- a/nn/services.po
+++ b/nn/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/nn/troubleshooting.po b/nn/troubleshooting.po
index a374839..c00cf95 100644
--- a/nn/troubleshooting.po
+++ b/nn/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Norwegian Nynorsk (http://www.transifex.com/projects/p/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nn\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/nso/bridges.po b/nso/bridges.po
index 0fe3fd5..19f4f07 100644
--- a/nso/bridges.po
+++ b/nso/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/nso/config.po b/nso/config.po
index b123267..2c5166c 100644
--- a/nso/config.po
+++ b/nso/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/nso/index.po b/nso/index.po
index 3996f86..1ce45b9 100644
--- a/nso/index.po
+++ b/nso/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/nso/links.po b/nso/links.po
index 8d4fb41..33df37d 100644
--- a/nso/links.po
+++ b/nso/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/nso/log.po b/nso/log.po
index 1e8d0bc..ba28719 100644
--- a/nso/log.po
+++ b/nso/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/nso/netview.po b/nso/netview.po
index 017214a..0596ff4 100644
--- a/nso/netview.po
+++ b/nso/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/nso/running.po b/nso/running.po
index f6e001b..b1249a0 100644
--- a/nso/running.po
+++ b/nso/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/nso/server.po b/nso/server.po
index f70e84e..ffb1deb 100644
--- a/nso/server.po
+++ b/nso/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/nso/services.po b/nso/services.po
index 75ad0a5..efe3a83 100644
--- a/nso/services.po
+++ b/nso/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/nso/troubleshooting.po b/nso/troubleshooting.po
index 8cca8db..503d1a2 100644
--- a/nso/troubleshooting.po
+++ b/nso/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Northern Sotho (http://www.transifex.com/projects/p/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: nso\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/oc/bridges.po b/oc/bridges.po
index 96d7063..1529345 100644
--- a/oc/bridges.po
+++ b/oc/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/oc/config.po b/oc/config.po
index 58d689e..f72be6d 100644
--- a/oc/config.po
+++ b/oc/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/oc/index.po b/oc/index.po
index 73e3011..1f2e9bb 100644
--- a/oc/index.po
+++ b/oc/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/oc/links.po b/oc/links.po
index ca20fe8..00ffd50 100644
--- a/oc/links.po
+++ b/oc/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/oc/log.po b/oc/log.po
index 485af3a..766e652 100644
--- a/oc/log.po
+++ b/oc/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/oc/netview.po b/oc/netview.po
index 25dff63..3dfe9a0 100644
--- a/oc/netview.po
+++ b/oc/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/oc/running.po b/oc/running.po
index bd26c3a..66fb47c 100644
--- a/oc/running.po
+++ b/oc/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/oc/server.po b/oc/server.po
index 0f1aef9..f0a98b3 100644
--- a/oc/server.po
+++ b/oc/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/oc/services.po b/oc/services.po
index 760c29b..f52bf75 100644
--- a/oc/services.po
+++ b/oc/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/oc/troubleshooting.po b/oc/troubleshooting.po
index 47d0f1c..f4d24c8 100644
--- a/oc/troubleshooting.po
+++ b/oc/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Occitan (post 1500) (http://www.transifex.com/projects/p/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: oc\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/or/bridges.po b/or/bridges.po
index 5d7af60..dff5a4b 100644
--- a/or/bridges.po
+++ b/or/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/or/config.po b/or/config.po
index ad9dce8..52d617c 100644
--- a/or/config.po
+++ b/or/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/or/index.po b/or/index.po
index 83affd9..92c9794 100644
--- a/or/index.po
+++ b/or/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/or/links.po b/or/links.po
index 59b9a98..614bf2b 100644
--- a/or/links.po
+++ b/or/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/or/log.po b/or/log.po
index 16a8986..f82f648 100644
--- a/or/log.po
+++ b/or/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/or/netview.po b/or/netview.po
index 51ffc1a..38f8b57 100644
--- a/or/netview.po
+++ b/or/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/or/running.po b/or/running.po
index c26cc78..6c1a0fc 100644
--- a/or/running.po
+++ b/or/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/or/server.po b/or/server.po
index f8cfa00..292c28e 100644
--- a/or/server.po
+++ b/or/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/or/services.po b/or/services.po
index a07126a..ecf8e5e 100644
--- a/or/services.po
+++ b/or/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/or/troubleshooting.po b/or/troubleshooting.po
index f1e9403..a99bf94 100644
--- a/or/troubleshooting.po
+++ b/or/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Oriya (http://www.transifex.com/projects/p/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: or\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/pap/bridges.po b/pap/bridges.po
index 2f85ad3..4ec9c02 100644
--- a/pap/bridges.po
+++ b/pap/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/pap/config.po b/pap/config.po
index b782b6a..6c0f0bd 100644
--- a/pap/config.po
+++ b/pap/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/pap/index.po b/pap/index.po
index f9559b9..61b1f71 100644
--- a/pap/index.po
+++ b/pap/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/pap/links.po b/pap/links.po
index 5d2736c..57c811b 100644
--- a/pap/links.po
+++ b/pap/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/pap/log.po b/pap/log.po
index 41f8659..174cf54 100644
--- a/pap/log.po
+++ b/pap/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/pap/netview.po b/pap/netview.po
index bacfd48..1be0e66 100644
--- a/pap/netview.po
+++ b/pap/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/pap/running.po b/pap/running.po
index 507276f..641ee66 100644
--- a/pap/running.po
+++ b/pap/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/pap/server.po b/pap/server.po
index dee8f33..dcffcee 100644
--- a/pap/server.po
+++ b/pap/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/pap/services.po b/pap/services.po
index fffc9e1..d355882 100644
--- a/pap/services.po
+++ b/pap/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/pap/troubleshooting.po b/pap/troubleshooting.po
index a58a155..cff4cae 100644
--- a/pap/troubleshooting.po
+++ b/pap/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Papiamento (http://www.transifex.com/projects/p/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pap\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/pms/bridges.po b/pms/bridges.po
index a5da22a..fe7e668 100644
--- a/pms/bridges.po
+++ b/pms/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/pms/config.po b/pms/config.po
index f71d788..34b5a86 100644
--- a/pms/config.po
+++ b/pms/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/pms/index.po b/pms/index.po
index 22289eb..175ea24 100644
--- a/pms/index.po
+++ b/pms/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/pms/links.po b/pms/links.po
index 82e68c7..351c9d9 100644
--- a/pms/links.po
+++ b/pms/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/pms/log.po b/pms/log.po
index 9688575..a6b721e 100644
--- a/pms/log.po
+++ b/pms/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/pms/netview.po b/pms/netview.po
index 6860d6d..4704c1f 100644
--- a/pms/netview.po
+++ b/pms/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/pms/running.po b/pms/running.po
index ecf2995..f30bcfa 100644
--- a/pms/running.po
+++ b/pms/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/pms/server.po b/pms/server.po
index 92e7ce9..58ebb28 100644
--- a/pms/server.po
+++ b/pms/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/pms/services.po b/pms/services.po
index 93fc063..44f9836 100644
--- a/pms/services.po
+++ b/pms/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/pms/troubleshooting.po b/pms/troubleshooting.po
index d5de27e..62b8dca 100644
--- a/pms/troubleshooting.po
+++ b/pms/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Piemontese (http://www.transifex.com/projects/p/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pms\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ps/bridges.po b/ps/bridges.po
index aa3b38b..a3ba4e9 100644
--- a/ps/bridges.po
+++ b/ps/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ps/config.po b/ps/config.po
index 0c49954..54d599f 100644
--- a/ps/config.po
+++ b/ps/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ps/index.po b/ps/index.po
index 3c78c35..2f7d4dd 100644
--- a/ps/index.po
+++ b/ps/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ps/links.po b/ps/links.po
index 78bb1c4..981432e 100644
--- a/ps/links.po
+++ b/ps/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ps/log.po b/ps/log.po
index 18630a2..59ff7d8 100644
--- a/ps/log.po
+++ b/ps/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ps/netview.po b/ps/netview.po
index e36dfab..ccfd8e2 100644
--- a/ps/netview.po
+++ b/ps/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ps/running.po b/ps/running.po
index 66c83c1..ed6bdfa 100644
--- a/ps/running.po
+++ b/ps/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ps/server.po b/ps/server.po
index d862666..6f6b143 100644
--- a/ps/server.po
+++ b/ps/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ps/services.po b/ps/services.po
index fcb16fe..e261834 100644
--- a/ps/services.po
+++ b/ps/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ps/troubleshooting.po b/ps/troubleshooting.po
index c50edc5..8ee8b50 100644
--- a/ps/troubleshooting.po
+++ b/ps/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Pushto (http://www.transifex.com/projects/p/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ps\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ru(a)petr1708/bridges.po b/ru(a)petr1708/bridges.po
new file mode 100644
index 0000000..4df91fa
--- /dev/null
+++ b/ru(a)petr1708/bridges.po
@@ -0,0 +1,100 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 16:58+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/bridges.html:16
+msgid "Bridge Relays"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/bridges.html:19
+msgid "<a name=\"about\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/bridges.html:20
+msgid "What are bridge relays?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:22
+msgid ""
+"Some Internet Service Providers (ISPs) attempt to prevent users from "
+"accessing the Tor network by blocking connections to known Tor relays. "
+"Bridge relays (or <i>bridges</i> for short) are relays that help these "
+"censored users access the Tor network. Unlike other Tor relays, bridges are "
+"not listed in the same public directories as normal relays. Since there is "
+"no complete public list of them, even if your ISP is filtering connections "
+"to all the known Tor relays, they probably won't be able to block all the "
+"bridges."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/bridges.html:31
+msgid "<a name=\"finding\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/bridges.html:32
+msgid "How do I find a bridge relay?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:34
+msgid "There are two main ways to learn about a bridge address:"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/bridges.html:36
+msgid "Get some friends to run private bridges for you"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/bridges.html:37
+msgid "Use some of the public bridges"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:42
+msgid ""
+"To use private bridges, ask your friends to run Vidalia and Tor in an "
+"uncensored area of the Internet, and then click on <i>Help censored "
+"users</i> in Vidalia's <a href=\"server.html\">Relay settings page</a>. Then"
+" they should privately send you the <i>Bridge address</i> line at the bottom"
+" of their Relay page. Unlike running an exit relay, running a bridge relay "
+"just passes data to and from the Tor network, so it shouldn't expose the "
+"operator to any abuse complaints."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:52
+msgid ""
+"You can find public bridge addresses by visiting "
+"<b>https://bridges.torproject.org</b>. The answers you get from that page "
+"will change every few days, so check back periodically if you need more "
+"bridge addresses. Another way to find public bridge addresses is to send "
+"mail to <b>bridges(a)torproject.org</b> with the line <b>get bridges</b> by "
+"itself in the body of the mail. However, so we can make it harder for an "
+"attacker to learn lots of bridge addresses, you must send this request from "
+"a Gmail account."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/bridges.html:63
+msgid ""
+"Configuring more than one bridge address will make your Tor connection more "
+"stable, in case some of the bridges become unreachable."
+msgstr ""
diff --git a/ru(a)petr1708/config.po b/ru(a)petr1708/config.po
new file mode 100644
index 0000000..4c5ffbf
--- /dev/null
+++ b/ru(a)petr1708/config.po
@@ -0,0 +1,300 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 16:58+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/config.html:16
+msgid "Configuring Vidalia and Tor"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:20
+msgid ""
+"Vidalia allows you to configure some of the most commonly modified aspects "
+"of Vidalia and Tor. It also lets you set up and manage a <a "
+"href=\"server.html\">Tor relay</a> so you can help the Tor network grow."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:26
+msgid "<a name=\"general\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:27
+msgid "General Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:29
+msgid ""
+"Settings on the <i>General</i> page are the most commonly modified settings."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:32
+msgid ""
+"<b>Tor Executable</b>: This is the Tor executable that Vidalia will run when"
+" you select <i>Start</i> from the tray menu. If you have multiple versions "
+"of Tor installed, you can tell Vidalia which version you would like to run "
+"by clicking the <i>Browse</i> button and navigating to the particular Tor "
+"installation you want."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:39
+msgid ""
+"<b>Startup Options</b>: This setting allows you to have Vidalia "
+"automatically start Tor when Vidalia starts. You can also configure Vidalia "
+"to run when your system starts (<i>Windows only</i>)."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:46
+msgid "<a name=\"network\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:47
+msgid "Network Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:49
+msgid ""
+"The <i>Network</i> settings page lets you change how Tor connects to the Tor"
+" network."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:53
+msgid ""
+"<b>I use a proxy to access the Internet</b>: If your Internet connection "
+"requires an HTTP proxy, you can configure Tor to send all of its directory "
+"requests and Tor relay connections through your proxy. You must specify at "
+"least the hostname or address of your proxy, and the port on which your "
+"proxy is listening for connections. If your proxy requires authentication, "
+"you can also enter the <i>Username</i> and <i>Password</i> you use to "
+"connect to your proxy. Otherwise, you can leave those fields blank."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:62
+msgid ""
+"<b>My firewall only lets me connect to certain ports</b>: If you are behind "
+"a restrictive firewall or proxy that limits the ports you are able to "
+"connect to, you can configure Tor to connect directly only to relays "
+"listening on the ports allowed by your firewall or proxy. Simply enter a "
+"list of ports permitted by your firewall or proxy, separated by commas. "
+"(<i>Example: 80,443,8080</i>)"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:69
+msgid ""
+"<b>My ISP blocks connections to the Tor network</b>: If your ISP (Internet "
+"Service Provider) blocks connections to the Tor network, Tor can attempt to "
+"avoid being filtered by encrypting its directory connections and connecting "
+"to the Tor network through relays called <i>bridges</i> (Tor 0.2.0.3-alpha "
+"or newer only). You can add bridge relays by specifying either their address"
+" and port number, or their address, port number, and fingerprint."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:77
+msgid "Below are examples of valid bridge address formats:"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:80
+msgid "128.213.48.13:8080"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:83
+msgid "128.213.48.13:8080 1054 13B1 DBDA F867 B226 74D2 52DF 3D9F A367 1F73"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:86
+msgid "128.213.48.13:8080 105413B1DBDAF867B22674D252DF3D9FA3671F73"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:89
+msgid ""
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:100
+msgid "<a name=\"relay\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:101
+msgid "Relay Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:103
+msgid ""
+"<i> See <a href=\"server.html\">this help topic</a> for detailed information"
+" about setting up and managing a Tor relay. </i>"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:109
+msgid "<a name=\"appearance\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:110
+msgid "Appearance Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:112
+msgid ""
+"The settings on the <i>Appearance</i> page allow you to customize the look "
+"and feel of Vidalia."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:116
+msgid ""
+"<b>Language</b>: Vidalia's interface has been translated into many languages"
+" by helpful volunteers. When Vidalia is first run, it will try to guess "
+"which language your computer is currently using. If Vidalia guesses "
+"incorrectly, or if you prefer a different language, you can choose another "
+"language from the dropdown box. You will need to restart Vidalia after "
+"changing the displayed language for the changes to take effect."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:124
+msgid ""
+"<b>Style</b>: In most cases, Vidalia will default to using your platform's "
+"default interface style. If you dislike the default, you can choose "
+"whichever interface style you prefer from the dropdown box."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:131
+msgid "<a name=\"advanced\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:132
+msgid "Advanced Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:134
+msgid ""
+"The settings on the <i>Advanced</i> page should generally only be modified "
+"by more experienced users."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:138
+msgid ""
+"<b>Control Address & Port</b>: The <i>Control Port</i> is the port which"
+" Vidalia uses to talk to Tor. This doesn't need to be changed unless you "
+"have a conflict with another service on your machine, or if you are using "
+"Vidalia to control and monitor a Tor process running on another machine."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:144
+msgid ""
+"<b>Control Port Authentication</b>: Control port authentication is used to "
+"limit the applications on your machine that can connect to and reconfigure "
+"your Tor installation. The available authentication methods are:"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:150
+msgid ""
+"<b>None</b> -- No authentication is required. Use of this option is "
+"<b>strongly</b> discouraged. Any application or user on your computer can "
+"reconfigure your Tor installation."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:155
+msgid ""
+"<b>Password</b> <i>(Default)</i> -- If this method is selected, you can "
+"specify a password that Tor will require each time a user or application "
+"connects to Tor's control port. If Vidalia starts Tor for you, you can have "
+"Vidalia randomly generate a new password each time it starts Tor by checking"
+" the <i>Randomly Generate</i> checkbox."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li><ul><li>
+#: en/config.html:162
+msgid ""
+"<b>Cookie</b> -- If cookie authentication is selected, Tor will write a file"
+" (or, <i>cookie</i>) containing random bytes to its data directory when it "
+"starts. Any user or application that tries to connect to Tor's control port "
+"must be able to provide the contents of this cookie."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:170
+msgid ""
+"<b>Tor Configuration File</b> <i>(optional)</i>: You can use this option to "
+"have Vidalia start Tor using a specific <i>torrc</i>, Tor's configuration "
+"file. If you leave this field blank, Tor will uses its own default torrc "
+"location."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:175
+msgid ""
+"<b>Tor Data Directory</b> <i>(optional)</i>: You can specify the directory "
+"in which Tor will store its saved data, such as cached Tor relay "
+"information, Tor relay keys, and configuration files. If you leave this "
+"field blank, Tor will use its own default data directory location."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/config.html:181
+msgid ""
+"<b>Permissions</b> <i>(optional, not available on Windows)</i>: If you enter"
+" a value for <b>Run as User</b>, Tor will <i>setuid</i> to this user when it"
+" starts. If you enter a value for <b>Run as Group</b>, Tor will "
+"<i>setgid</i> to this group when it starts."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/config.html:189
+msgid "<a name=\"services\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/config.html:190
+msgid "Hidden Service Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/config.html:192
+msgid ""
+"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
+" HTTP service, to others without revealing your IP address."
+msgstr ""
diff --git a/ru(a)petr1708/index.po b/ru(a)petr1708/index.po
new file mode 100644
index 0000000..b669992
--- /dev/null
+++ b/ru(a)petr1708/index.po
@@ -0,0 +1,46 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 16:59+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/index.html:16
+msgid "Vidalia Help"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:20
+msgid ""
+"Select a help topic from the tree on the left or click on the Search button "
+"above the list of topics to search through all available help topics."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:25
+msgid ""
+"You can use the <i>Find</i> button on the toolbar above to search within a "
+"particular help topic."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:30
+msgid "The <i>Home</i> button above will bring you back to this home page."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/index.html:34
+msgid ""
+"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
+"can visit to find additional help and information about Vidalia and Tor."
+msgstr ""
diff --git a/ru(a)petr1708/links.po b/ru(a)petr1708/links.po
new file mode 100644
index 0000000..61d0002
--- /dev/null
+++ b/ru(a)petr1708/links.po
@@ -0,0 +1,79 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2011-05-05 20:21+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: links.html:16
+msgid "Helpful Links"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: links.html:19
+msgid "Vidalia"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:22 links.html:30 links.html:42 links.html:49 links.html:57
+msgid " "
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:23 links.html:43
+msgid "Homepage"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:25
+msgid ""
+"<a href=\"https://www.torproject.org/vidalia/\"> "
+"https://www.torproject.org/vidalia/</a>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:31 links.html:58
+msgid "Wiki and Bugtracker"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:33
+msgid "<a href=\"http://trac.torproject.org/\"> http://trac.torproject.org/</a>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: links.html:39
+msgid "Tor"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:45
+msgid "<a href=\"https://www.torproject.org/\">https://www.torproject.org/</a>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:50
+msgid "FAQ"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:52
+msgid ""
+"<a href=\"https://www.torproject.org/docs/faq.html\"> "
+"https://www.torproject.org/docs/faq.html</a>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: links.html:60
+msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
+msgstr ""
diff --git a/ru(a)petr1708/log.po b/ru(a)petr1708/log.po
new file mode 100644
index 0000000..8ca7912
--- /dev/null
+++ b/ru(a)petr1708/log.po
@@ -0,0 +1,159 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/log.html:16
+msgid "Message Log"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/log.html:19
+msgid ""
+"The message log lets you see status information about a running Tor process."
+" <a name=\"basic\"/> Each message has a <i>severity</i> associated with it,"
+" ranging from <b>Error</b> (most serious) to <b>Debug</b> (most verbose). "
+"See the help section on <a href=\"#severities\">message severities</a> for "
+"more information. <a name=\"severities\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/log.html:28
+msgid "Message Severities"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:30
+msgid ""
+"A message's severity tells you how important the message is. A higher "
+"severity message usually indicates that something has gone wrong with Tor. "
+"Lower severity messages appear frequently during normal Tor operations and "
+"usually do not need to be logged."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:37
+msgid ""
+"The possible message severities, from most severe to least severe, are:"
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:41
+msgid ""
+"<b>Error</b>: Messages that appear when something has gone very wrong and "
+"Tor cannot proceed. These messages will be highlighted in <i>red</i> in the "
+"message log."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:46
+msgid ""
+"<b>Warning</b>: Messages that only appear when something has gone wrong with"
+" Tor, but are not fatal and Tor will continue running. These messages will "
+"be highlighted in <i>yellow</i>."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:51
+msgid ""
+"<b>Notice</b>: Messages that appear infrequently during normal Tor operation"
+" and are not considered errors, but you still may care about."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:55
+msgid ""
+"<b>Info</b>: Messages that appear frequently during normal Tor operation and"
+" are not usually of interest to most users."
+msgstr ""
+
+#. type: Content of: <html><body><ul><li>
+#: en/log.html:59
+msgid ""
+"<b>Debug</b>: Extremely verbose messages that are primarily of interest to "
+"developers. You should generally not log debug messages unless you know what"
+" you are doing."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:66
+msgid ""
+"Most users should only log <i>Error</i>, <i>Warning</i>, and <i>Notice</i> "
+"messages."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:71
+msgid ""
+"To select which message severities you would like to see, do the following:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:73 en/log.html:92
+msgid "Open the message log from the Vidalia tray menu."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:74 en/log.html:93
+msgid "Click on <i>Settings</i> at the top of the message log window."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/log.html:76
+msgid ""
+"Check message severities you would like to see from the Message Filter group"
+" on the left and uncheck message severities you would like to hide."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/log.html:79
+msgid "Click <i>Save Settings</i> to apply your new message filter."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/log.html:84
+msgid "<a name=\"logfile\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/log.html:85
+msgid "Logging to a File"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/log.html:87
+msgid ""
+"Vidalia can also write log messages to a file, as well as logging them in "
+"the message log window. To enable logging to a file, follow these steps:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:94
+msgid ""
+"Check the box labeled <i>Automatically save new log messages to a file</i>."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:96
+msgid ""
+"If you would like to change the file to which messages will be written, "
+"either type the path and filename into the text box, or click <i>Browse</i> "
+"to navigate to a location for your log file."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/log.html:100
+msgid "Click <i>Save Settings</i> to save your log destination."
+msgstr ""
diff --git a/ru(a)petr1708/netview.po b/ru(a)petr1708/netview.po
new file mode 100644
index 0000000..23eecf6
--- /dev/null
+++ b/ru(a)petr1708/netview.po
@@ -0,0 +1,247 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/netview.html:16
+msgid "Network Viewer"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:20
+msgid ""
+"The network viewer lets you see relays in the Tor network and where your "
+"traffic is going."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:25
+msgid "<a name=\"overview\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:26
+msgid "Overview"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:28
+msgid ""
+"When you want to communicate anonymously through Tor (say, connecting to a "
+"website), Tor creates a tunnel, or <i>circuit</i>, of encrypted connections "
+"through a series of relays on the network. Your application's traffic is "
+"then sent as a <i>stream</i> through that circuit. For efficiency, multiple "
+"streams may share the same circuit."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:35
+msgid "<a name=\"netmap\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:36
+msgid "Network Map"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:38
+msgid ""
+"The network map consists of a map of the world, with red pinpoints "
+"indicating the geographic location of relays in the Tor network. Green lines"
+" are drawn between relays to indicate the path of circuits that your Tor "
+"client has created through the Tor network."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:44
+msgid ""
+"You can zoom in on locations in the map by clicking the <b>Zoom In</b> and "
+"<b>Zoom Out</b> buttons in the toolbar. You can also scroll around on the "
+"map by clicking on the map and then dragging it in whatever direction you "
+"would like to move the map."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:50
+msgid ""
+"The geographic location of a Tor relay is determined by looking up the IP "
+"address of the relay in a GeoIP database, created by MaxMind and located at "
+"geoip.vidalia-project.net."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:55
+msgid ""
+"In the middle of the dialog, below the network map, you will see a list of "
+"your current circuits, as well as any application traffic currently on those"
+" circuits. When the network map first loads, you will probably see a "
+"connection to geoip.vidalia-project.net, which occurs when Vidalia is "
+"looking up geographic information for the list of Tor relays. It is "
+"important to note that this request is done through Tor, so your location is"
+" not revealed to the GeoIP relay. The results of the lookups will be cached "
+"locally in order to reduce load on Vidalia's GeoIP relays."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:66
+msgid "<a name=\"relaylist\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:67
+msgid "Relay Status"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:69
+msgid ""
+"On the left side of the network view, you will see a list of relays in the "
+"Tor network. Next to each relay is an icon indicating that relay's status. "
+"The following table summarizes the possible relay status icons:"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:78
+msgid "The relay is offline or simply not responding."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:84
+msgid ""
+"The relay is <i>hibernating</i>, meaning it is online, but has used up as "
+"much bandwidth as the operator is willing to allow for a given time period."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:92
+msgid "The relay is online, but has shown only minimal throughput."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:98
+msgid "The relay is online and has shown a throughput >= 20 KB/s."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:104
+msgid "The relay is online and has shown a throughput >= 60 KB/s."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:110
+msgid "The relay is online and has shown a throughput >= 400 KB/s."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:116
+msgid ""
+"All bandwidth values are estimates based on the minimum of either the "
+"maximum bandwidth sustained input or output over any ten second period in "
+"the past day."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/netview.html:122
+msgid "<a name=\"details\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/netview.html:123
+msgid "Relay Details"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:125
+msgid ""
+"The relay details panel at the right side of the screen gives you details "
+"about the relay or relays currently selected in the <a "
+"href=\"#relaylist\">relay list</a>. If you have selected a circuit or stream"
+" in the list of your current circuits and streams, this panel will show you "
+"details about each relay through which your traffic is currently being sent."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/netview.html:132
+msgid ""
+"The fields that you may see in the panel are as follows (<i>Note</i>: not "
+"all of these fields will always be present):"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:138
+msgid "<b>Location</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:139
+msgid "The geographic location of this Tor relay."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:142
+msgid "<b>IP Address</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:143
+msgid "IP address at which this Tor relay can be reached."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:146
+msgid "<b>Platform</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:148
+msgid ""
+"Operating system information and Tor version on which this relay is "
+"currently running."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:153
+msgid "<b>Bandwidth</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:155
+msgid ""
+"Estimated maximum amount of bandwidth that the directory relays have seen "
+"this relay handle recently."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:160
+msgid "<b>Uptime</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:162
+msgid ""
+"Length of time this relay has been available, which can be used to help "
+"estimate this relay's stability."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:167
+msgid "<b>Last Updated</b>"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/netview.html:168
+msgid "Date this relay's information was last updated."
+msgstr ""
diff --git a/ru(a)petr1708/running.po b/ru(a)petr1708/running.po
new file mode 100644
index 0000000..772df68
--- /dev/null
+++ b/ru(a)petr1708/running.po
@@ -0,0 +1,149 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/running.html:16
+msgid "Running Tor"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:20
+msgid ""
+"Vidalia can help you control your Tor process by letting you start and stop "
+"Tor, as well as monitoring Tor's status and letting you know if it exits "
+"unexpectedly."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/running.html:25
+msgid "<a name=\"starting\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/running.html:26
+msgid "Starting and Stopping Tor"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:28
+msgid "To <i>start</i> Tor,"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:30
+msgid "Select <i>Start</i> from Vidalia's tray menu or press <i>Ctrl+S</i>"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol>
+#: en/running.html:30 en/running.html:45
+msgid "."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:32
+msgid ""
+"Vidalia's tray icon will change from an onion with a red X to a green onion "
+"when Tor has started."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:36
+msgid ""
+"If Vidalia is unable to start Tor, Vidalia will display an error message "
+"telling you what went wrong. You can also look at your <a "
+"href=\"log.html\">message log</a> to see if Tor printed any more information"
+" about what went wrong."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:43
+msgid "To <i>stop</i> Tor,"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:45
+msgid "Select <i>Stop</i> from Vidalia's tray menu or press <i>Ctrl+T</i>"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/running.html:47
+msgid ""
+"Vidalia's tray icon will change from a green onion to a gray onion with a "
+"red X when Tor has stopped."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:51
+msgid ""
+"If Vidalia was unable to stop Tor, Vidalia will display an error message "
+"telling you what went wrong. You can also look at your <a "
+"href=\"log.html\">message log</a> to see if Tor printed any more information"
+" about what went wrong."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/running.html:57
+msgid "<a name=\"monitoring\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/running.html:58
+msgid "Monitoring Tor's Status"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:60
+msgid ""
+"Vidalia tells you about the status of Tor by displaying an icon in your "
+"system tray or dock area. The following table shows the different states "
+"indicated by an icon in your system's notification area:"
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:69
+msgid ""
+"Tor is stopped. Select <i>Start</i> from the Vidalia menu to start Tor."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:76
+msgid ""
+"Tor is starting up. You can check the <a href=\"log.html\">message log</a> "
+"for status information about Tor while it is starting."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:84
+msgid ""
+"Tor is running. If you want to stop Tor, select <i>Stop</i> from the Vidalia"
+" menu. Tor will print informational messages to the <a "
+"href=\"log.html\">message log</a> while it is running, if you want to see "
+"what Tor is doing."
+msgstr ""
+
+#. type: Content of: <html><body><p><table><tr><td>
+#: en/running.html:92
+msgid "Tor is in the process of shutting down."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/running.html:98
+msgid ""
+"If Tor exits unexpectedly, Vidalia will change its icon to the dark onion "
+"with a red X and display an error message letting you know what went wrong. "
+"You can also check the <a href=\"log.html\">message log</a> for details "
+"about any problems Tor encountered before it exited."
+msgstr ""
diff --git a/ru(a)petr1708/server.po b/ru(a)petr1708/server.po
new file mode 100644
index 0000000..7973169
--- /dev/null
+++ b/ru(a)petr1708/server.po
@@ -0,0 +1,403 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/server.html:16
+msgid "Setting Up a Tor Relay"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:19
+msgid ""
+"The Tor network is made up of volunteers all over the world who donate some "
+"of their spare bandwidth by running a Tor relay. Vidalia helps you do your "
+"part by making it easy to set up a relay of your own. <a name=\"basic\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:24
+msgid "Basic Settings"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:26
+msgid ""
+"If you decide you want to help the Tor network grow by running a relay, you "
+"can follow these steps to get started:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:31
+msgid ""
+"Open the <i>Configuration Dialog</i> by selecting <i>Settings</i> from the "
+"tray menu or <i>Preferences</i> from your system menubar on Macintosh "
+"systems."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:35
+msgid "Select the <i>Relay</i> configuration page."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:37
+msgid ""
+"Decide whether you want to run a normal Tor relay or a <i>bridge</i> relay "
+"(Tor 0.2.0.8-alpha or newer). Bridge relays help censored Tor users who are "
+"blocked from accessing the Tor network directly. Check the box labeled "
+"<i>Relay traffic for the Tor network</i> if you want to run a normal Tor "
+"relay or <i>Help censored users reach the Tor network</i> if you want to run"
+" a bridge relay."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:44
+msgid "Enter the following information:"
+msgstr ""
+
+#. type: Content of: <html><body><ol><ul><li>
+#: en/server.html:46
+msgid ""
+"<b>Nickname</b>: The name which your relay will be known as on the Tor "
+"network. An example of a relay nickname is \"MyVidaliaRelay\"."
+msgstr ""
+
+#. type: Content of: <html><body><ol><ul><li>
+#: en/server.html:50
+msgid ""
+"<b>Contact Info</b>: Your e-mail address. This address will only be used to "
+"contact you in case there is an important Tor security update or something "
+"goes wrong with your relay. You might also include your PGP or GPG key ID "
+"and fingerprint."
+msgstr ""
+
+#. type: Content of: <html><body><ol><ul><li>
+#: en/server.html:56
+msgid ""
+"<b>Relay Port</b>: The port on which your relay will listen for traffic from"
+" clients or other Tor relays."
+msgstr ""
+
+#. type: Content of: <html><body><ol><li>
+#: en/server.html:62
+msgid ""
+"If you would like to mirror Tor's directory of relays for others on the "
+"network you can check the box labeled <i>Mirror the Relay Directory</i>. If"
+" you do not have much bandwidth, uncheck this box. If you do decide to "
+"mirror the relay directory, make sure the <i>Directory Port</i> is different"
+" than the <i>Relay port</i> you entered above. Bridge relays <i>must</i> "
+"mirror the relay directory."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:71
+msgid "<a name=\"bandwidth\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:72
+msgid "Bandwidth Limits"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:74
+msgid ""
+"Running a Tor relay can consume a large amount of bandwidth; however, Tor "
+"allows you to limit the amount of bandwidth that you are willing to "
+"contribute to the Tor network. You can run a relay, while still keeping your"
+" network connection usable for your own use."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:80
+msgid ""
+"You should select the option in the dropdown box that best matches your "
+"connection speed. If you select <i>Custom</i>, you will be able to specify "
+"your own limits."
+msgstr ""
+
+#. type: Content of: <html><body><h4>
+#: en/server.html:84
+msgid "Custom Limits"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:86
+msgid ""
+"The <i>maximum rate</i> is a pool of bytes used to fulfill requests during "
+"short periods of traffic higher than your specified <i>average rate</i>, but"
+" still maintains the average over a long period. A low average rate but a "
+"high maximum rate enforces a long-term average while still allowing more "
+"traffic during peak times if the average hasn't been reached lately. If your"
+" average rate is the same as your <i>maximum rate</i>, then Tor will never "
+"exceed the specified rate. Your <i>maximum rate</i> must always be greater "
+"than or equal to your <i>average rate</i>."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:96
+msgid ""
+"The <i>average rate</i> is the maximum long-term average bandwidth allowed "
+"(in kilobytes per second). For example, you might want to choose 2 megabytes"
+" per second (2048 KB/s), or 50 kilobytes per second (a medium-speed cable "
+"connection). Tor requires a minimum of 20 kilobytes per second to run a "
+"relay."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:103
+msgid ""
+"It is important to remember that Tor measures bandwidth in <b>bytes</b>, not"
+" bits. Also, Tor only looks at incoming bytes instead of outgoing bytes. For"
+" example, if your relay acts as a directory mirror, you may be sending more "
+"outgoing bytes than incoming. If you find this is the case and is putting "
+"too much strain on your bandwidth, you should consider unchecking the "
+"checkbox labeled <i>Mirror the relay directory</i>."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:111
+msgid "<a name=\"exitpolicy\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:112
+msgid "Exit Policies"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:114
+msgid ""
+"Exit policies give you a way to specify what kinds of resources on the "
+"Internet you are willing let other Tor users access from your Tor relay. "
+"Tor uses a default list of exit policies that restrict some services, such "
+"as mail to prevent spam and some default file sharing ports to reduce abuse "
+"of the Tor network."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:121
+msgid ""
+"Each of the checkboxes represents a type of resource that you can allow Tor "
+"users to access through your relay. If you uncheck the box next to a "
+"particular type of resource, Tor users will not be allowed to access that "
+"resource from your relay. If the box labeled <i>Misc Other Services</i> is "
+"checked, Tor users will be able to access other services not covered by the "
+"other checkboxes or Tor's default exit policy."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:130
+msgid ""
+"For completeness, the following table lists the specific port numbers "
+"represented by each of the exit policy checkboxes. The <b>Description</b> "
+"column describes the resources Tor clients will be allowed to access through"
+" your relay, if the associated box is checked."
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:138
+msgid "<b>Checkbox</b>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:139
+msgid "<b>Ports</b>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:140
+msgid "<b>Description</b>"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:143
+msgid "Websites"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:144
+msgid "80"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:145
+msgid "Normal, unencrypted Web browsing"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:148
+msgid "Secure Websites (SSL)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:149
+msgid "443"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:150
+msgid "Encrypted Web browsing"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:153
+msgid "Retrieve Mail (POP, IMAP)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:154
+msgid "110, 143, 993, 995"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:155
+msgid "Downloading email (does not permit sending email)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:158
+msgid "Instant Messaging (IM)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:159
+msgid "703, 1863, 5050, 5190, 5222, 5223, 8300, 8888"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:160
+msgid ""
+"Instant messaging applications like MSN Messenger, AIM, ICQ, and Jabber"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:163
+msgid "Internet Relay Chat (IRC)"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:164
+msgid "6660-6669, 6697, 7000-7001"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:165
+msgid "IRC clients and servers"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:168
+msgid "Misc. Other Services"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:169
+msgid "*"
+msgstr ""
+
+#. type: Content of: <html><body><table><tr><td>
+#: en/server.html:170
+msgid "All other applications that aren't covered by the previous checkboxes"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:175
+msgid ""
+"If you do not want to let other Tor users make connections outside the Tor "
+"network from your relay, you can uncheck all of the checkboxes. Even if you "
+"uncheck all of the checkboxes, your relay is still useful to the Tor "
+"network. Your relay will allow other Tor users to connect to the Tor "
+"network and will help relay traffic between other Tor relays."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:182
+msgid ""
+"If you chose to run a bridge relay, the <i>Exit Policies</i> tab will be "
+"grayed out, since bridge relays do not allow exit connections. Bridges are "
+"only used by Tor clients to connect to the Tor network."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/server.html:188
+msgid "<a name=\"upnp\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/server.html:189
+msgid "Port Forwarding"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:191
+msgid ""
+"Many home users connect to the Internet via a <i>router</i>, which allows "
+"multiple computers on a local network to share the same Internet connection."
+" Some users may also be behind a <i>firewall</i> that blocks incoming "
+"connections to your computer from other computers on the Internet. If you "
+"want to run a Tor relay, however, other Tor clients and relays must be able "
+"to connect to your relay through your home router or firewall."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:200
+msgid ""
+"To make your relay publicly accessible, your router or firewall needs to "
+"know which ports to allow through to your computer by setting up what is "
+"known as <i>port forwarding</i>. Port forwarding configures your router or "
+"firewall to \"forward\" all connections to certain ports on your router or "
+"firewall to local ports on your computer."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:208
+msgid ""
+"If you check the box labeled <i>Attempt to automatically configure port "
+"forwarding</i>, Vidalia will attempt to automatically set up port forwarding"
+" on your local network connection so that other Tor clients can connect to "
+"your relay. Not all routers support automatic port forwarding, though. You "
+"can use the <i>Test</i> button next to the checkbox to find out if Vidalia "
+"is able to automatically set up port forwarding for you."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:217
+msgid ""
+"If the <i>Test</i> button finds that Vidalia is unable to set up port "
+"forwarding for you, you may need to enable this feature on your router or "
+"set up port forwarding manually. Some network devices have a feature called "
+"<i>Universal Plug-and-Play</i> (UPnP). If you can access your router's "
+"administrative interface, you should look for an option to enable UPnP. The "
+"administrative interface for most routers can be accessed by opening <a "
+"href=\"http://192.168.0.1/\">http://192.168.0.1</a> or <a "
+"href=\"http://192.168.1.1/\">http://192.168.1.1</a> in your Web browser. You"
+" should consult your router's instruction manual for more information."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/server.html:229
+msgid ""
+"If you need to set up port forwarding manually, the website <a "
+"href=\"http://www.portforward.com/english/routers/port_forwarding/routerindex.htm\">"
+" portforward.com</a> has instructions for how to set up port forwarding for "
+"many types of routers and firewalls. At a minimum, you will need to forward "
+"your <i>Relay Port</i>, which defaults to port 443 on Windows and 9001 on "
+"all other operating systems. If you also checked the checkbox labeled "
+"<i>Mirror the relay directory</i>, then you will also need to forward your "
+"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
+"default on all operating systems."
+msgstr ""
diff --git a/ru(a)petr1708/services.po b/ru(a)petr1708/services.po
new file mode 100644
index 0000000..5c6c689
--- /dev/null
+++ b/ru(a)petr1708/services.po
@@ -0,0 +1,246 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-06-26 17:00+0200\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. type: Content of: <html><body><h1>
+#: en/services.html:16
+msgid "Hidden Services"
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:19
+msgid ""
+"Remark: Support for hidden services is new in Vidalia. You should expect it "
+"to have bugs, some of which possibly corrupting your hidden service "
+"configuration. So, don't rely on it, or rather, don't blame us if something "
+"goes wrong. If you find bugs or have comments on this new feature, please "
+"let us know! We need your feedback. <a name=\"about\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:26
+msgid "What is a hidden service?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:28
+msgid ""
+"Hidden services allow you to provide any kind of TCP-based service, e.g. an "
+"HTTP service, to others without revealing your IP address. The protocol to "
+"provide a hidden service is built on top of the same circuits that Tor uses "
+"for anonymous browsing and roughly has similar anonymity properties."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:35
+msgid ""
+"For more information on hidden service you may want to read section 5 of "
+"Tor's design paper (doc/design-paper/tor-design.pdf) or the Rendezvous "
+"Specification (doc/spec/rend-spec.txt)."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:40
+msgid "<a name=\"provide\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:41
+msgid "How do I provide a hidden service?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:43
+msgid "Providing a hidden service consists of at least two steps:"
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/services.html:45
+msgid ""
+"Install a web server locally (or a server for whatever service you want to "
+"provide, e.g. IRC) to listen for local requests."
+msgstr ""
+
+#. type: Content of: <html><body><p><ol><li>
+#: en/services.html:47
+msgid ""
+"Configure your hidden service, so that Tor relays requests coming from Tor "
+"users to your local server."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:50
+msgid ""
+"There is a fine tutorial on the Tor website (https://www.torproject.org/docs"
+"/tor-hidden-service.html) that describes these steps in more detail."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:55
+msgid "<a name=\"data\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:56
+msgid "What data do I need to provide?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:58
+msgid ""
+"The services table contains five columns containing data about configured "
+"hidden services:"
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:61
+msgid ""
+"Onion Address (generated): The service (or onion) address is generated by "
+"Tor to uniquely identify your service. Give this onion address to the people"
+" who shall be able to access your service. You may use the \"Copy to "
+"clipboard\" button for that to avoid typos. If you have just created a "
+"hidden service, the field says \"[Created by Tor]\"; in order to make it "
+"display the real onion address, you need to save your configuration and re-"
+"open the settings window."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:68
+msgid ""
+"Virtual Port (required): This is the TCP port that clients will need to know"
+" in order to access your service. Typically, you will want to use the "
+"service-specific port here, e.g. port 80 for HTTP. Note that the virtual "
+"port usually has nothing to do with firewall settings, because it is only "
+"used Tor-internally."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:73
+msgid ""
+"Target (optional): Usually you want Tor to relay connection requests to "
+"localhost on a different port than the one you specified in \"Virtual "
+"Port\". Therefore, you can specify a target consisting of physical address "
+"and port to which requests to your hidden service are redirected, e.g. to "
+"localhost:5222 (or on whatever port your server is listening). If you don't "
+"specify any target, Tor will redirect requests to the port specified in "
+"\"Virtual Port\" on localhost."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:81
+msgid ""
+"Service Directory (required): Tor needs to store some hidden-service "
+"specific files in a separate directory, e.g. a private key and a hostname "
+"file containing the onion address. This directory should be distinct from a "
+"directory containing content that the service provides. A good place for a "
+"service directory might be a sub directory in Tor's data directory. -- Note "
+"that you cannot change the directory of a running service (it wouldn't make "
+"much sense to allow it, because Vidalia is not supposed to move directories "
+"on your hard disk!). If you want to move a hidden service to another "
+"directory, please proceed as follows: Start by disabling the service in "
+"Vidalia and save the configuration. Then move the directory on your hard "
+"disk to the new place. Finally, change the directory in Vidalia to the new "
+"location, enable the service again, and save the new configuration."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:95
+msgid ""
+"Enabled: If this checkbox is disabled, Vidalia will not configure the given "
+"hidden service in Tor. This can be useful for keeping the configuration of a"
+" currently unused service for later use. All non-enabled services are stored"
+" in the Vidalia-specific configuration file vidalia.conf."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:103
+msgid "<a name=\"buttons\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:104
+msgid "What are the five buttons used for?"
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:107
+msgid "Add service: Creates a new empty service configuration."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:108
+msgid ""
+"Remove service: Permanently removes a hidden service configuration. (If you"
+" want to temporarily remove a service, uncheck its Enabled checkbox.)"
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:111
+msgid ""
+"Copy to clipboard: Copies the onion address to the clipboard, so that you "
+"can tell it to whoever shall be able to use your service."
+msgstr ""
+
+#. type: Content of: <html><body><p><ul><li>
+#: en/services.html:114
+msgid "Browse: Lets you browse to find a local hidden service directory."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:119
+msgid "<a name=\"advanced\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:120
+msgid "How can I configure advanced hidden service settings?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:122
+msgid ""
+"Tor allows configuration of more specific settings for hidden services, e.g."
+" forcing to use (or avoiding) certain nodes as introduction points, or "
+"providing multiple virtual ports for the same service."
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:128
+msgid ""
+"However, we decided to simplify things in Vidalia and provide only the most "
+"common settings. If you want to configure advanced settings, you need to do "
+"so in Tor's torrc file. Vidalia will not remove those settings even when you"
+" are editing your hidden services. If you specify more than one virtual "
+"port, only the first will be displayed and be editable."
+msgstr ""
+
+#. type: Content of: <html><body>
+#: en/services.html:135
+msgid "<a name=\"client\"/>"
+msgstr ""
+
+#. type: Content of: <html><body><h3>
+#: en/services.html:136
+msgid "How does Vidalia help me to access other hidden services?"
+msgstr ""
+
+#. type: Content of: <html><body><p>
+#: en/services.html:138
+msgid ""
+"Not at all. There is no need to do so. If you want to access another hidden "
+"service, type the service's onion address in your browser (or appropriate "
+"client application if it's not a web service), and Tor does the rest for "
+"you. There is no need to specifically configure Tor for that."
+msgstr ""
diff --git a/ru(a)petr1708/troubleshooting.po b/ru(a)petr1708/troubleshooting.po
new file mode 100644
index 0000000..3a13109
--- /dev/null
+++ b/ru(a)petr1708/troubleshooting.po
@@ -0,0 +1,243 @@
+#
+# Translators:
+msgid ""
+msgstr ""
+"Project-Id-Version: The Tor Project\n"
+"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
+"POT-Creation-Date: 2010-08-03 15:49-0300\n"
+"PO-Revision-Date: 2013-09-16 17:15+0000\n"
+"Last-Translator: runasand <runa.sandvik(a)gmail.com>\n"
+"Language-Team: Russian Petrine orthography (http://www.transifex.com/projects/p/torproject/language/ru@petr1708/)\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ru@petr1708\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+# type: Content of: <html><body><h1>
+#: en/troubleshooting.html:16
+msgid "Troubleshooting"
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:19
+msgid ""
+"Listed below are some of the common problems or questions people have while "
+"running Tor. If you can't find anything about the particular problem you're "
+"having, check out our website at <i>www.vidalia-project.net</i> for more "
+"support and information. <a name=\"start\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:25
+msgid "I Can't Start Tor"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:27
+msgid ""
+"The most likely reason that Vidalia could not start Tor is because Vidalia "
+"is looking for your Tor installation in the wrong directory. You can tell "
+"Vidalia where Tor is located by updating the <i>Tor Executable</i> option in"
+" the <a href=\"config.html#general\">general configuration settings</a>."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:33
+msgid ""
+"Another possible reason that Tor cannot start is because there is already "
+"another Tor process running. Check your list of running process and stop the"
+" previous Tor process, if you find one. Then, try running Tor again."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:38
+msgid ""
+"If that did not help, check your <a href=\"log.html\">message log</a> to see"
+" if Tor printed any information about errors it encountered while trying to "
+"start."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:43
+msgid "<a name=\"connect\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:44
+msgid "Vidalia Can't Connect to Tor"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:46
+msgid ""
+"Vidalia manages Tor by communicating with it via Tor's <i>control port</i>."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:49
+msgid ""
+"The most common reason that Vidalia cannot connect to Tor is because Tor "
+"started, but encountered an error and exited immediately. You should check "
+"your <a href=\"log.html\">message log</a> to see if Tor reported any errors "
+"while it started."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:55
+msgid ""
+"If Tor is listening on a different port than Vidalia expects, Vidalia will "
+"be unable to connect to Tor. You rarely need to change this setting, but if "
+"there is another service running on your machine that conflicts with Tor's "
+"control port, you will need to specify a different port. You can change this"
+" setting in Vidalia's <a href=\"config.html#advanced\">advanced "
+"configuration settings</a>."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:63
+msgid "<a name=\"password\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:64
+msgid "Why is Vidalia asking me for a \"control password\"?"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:66
+msgid ""
+"Vidalia interacts with the Tor software via Tor's \"control port\". The "
+"control port lets Vidalia receive status updates from Tor, request a new "
+"identity, configure Tor's settings, etc. Each time Vidalia starts Tor, "
+"Vidalia sets a random password for Tor's control port to prevent other "
+"applications from also connecting to the control port and potentially "
+"compromising your anonymity."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:75
+msgid ""
+"Usually this process of generating and setting a random control password "
+"happens in the background. There are three common situations, though, where "
+"Vidalia may prompt you for a password:"
+msgstr ""
+
+# type: Content of: <html><body><ul><li>
+#: en/troubleshooting.html:82
+msgid ""
+"You're already running Vidalia and Tor. For example, this situation can "
+"happen if you installed the Vidalia bundle and now you're trying to run the "
+"Tor Browser Bundle. In that case, you'll need to close the old Vidalia and "
+"Tor before you can run this one."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:89
+msgid ""
+"Vidalia crashed, but left Tor running with the last known random password. "
+"After you restart Vidalia, it generates a new random password, but Vidalia "
+"can't talk to Tor, because the random passwords are different."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:94
+msgid ""
+"If the dialog that prompts you for a control password has a <i>Reset</i> "
+"button, you can click the button and Vidalia will restart Tor with a new "
+"random control password."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:99
+msgid ""
+"If you do not see a <i>Reset</i> button, or if Vidalia is unable to restart "
+"Tor for you, you can still fix the problem manually. Simply go into your "
+"process or task manager, and terminate the Tor process. Then use Vidalia to "
+"restart Tor and all will work again."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:106
+msgid ""
+"You had previously set Tor to run as a service. When Tor is set to run as a "
+"service, it starts up when the system boots. If you configured Tor to start "
+"as a service through Vidalia, a random password was set and saved in Tor. "
+"When you reboot, Tor starts up and uses the random password it saved. You "
+"login and start up Vidalia. Vidalia attempts to talk to the already running "
+"Tor. Vidalia generates a random password, but it is different than the saved"
+" password in the Tor service."
+msgstr ""
+
+# type: Content of: <html><body><ul><li><p>
+#: en/troubleshooting.html:114
+msgid ""
+"You need to reconfigure Tor to not be a service. See the Tor wiki page on "
+"running <a "
+"href=\"https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#WinNTService\">"
+" Tor as a service</a> for more information on how to remove the Tor service."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:122
+msgid "<a name=\"torexited\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:123
+msgid "Tor Exited Unexpectedly"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:125
+msgid ""
+"If Tor exits immediately after trying to start, you most likely have another"
+" Tor process already running. Check the <a href=\"log.html\">message log</a>"
+" to see if any of the last few messages in the list are highlighted in "
+"yellow and contain a message similar to the following:"
+msgstr ""
+
+# type: Content of: <html><body><pre>
+#: en/troubleshooting.html:131
+#, no-wrap
+msgid ""
+"connection_create_listener(): Could not bind to 127.0.0.1:9050: Address already in use. \n"
+"Is Tor already running?\n"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:135
+msgid ""
+"If you find an error message like the one above, you will need to stop the "
+"other Tor process before starting a new one with Vidalia. On Windows, you "
+"would need to look for <i>tor.exe</i> in your Task Manager. On most other "
+"operating systems, the <i>ps</i> command can help you find the other Tor "
+"process."
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:141
+msgid ""
+"If Tor had been running successfully for awhile (that is, longer than a few "
+"seconds), then you should check the <a href=\"log.html\">message log</a> for"
+" information about any errors Tor experienced before it exited. Such errors "
+"will be highlighted in either red or yellow."
+msgstr ""
+
+# type: Content of: <html><body>
+#: en/troubleshooting.html:147
+msgid "<a name=\"stop\"/>"
+msgstr ""
+
+# type: Content of: <html><body><h3>
+#: en/troubleshooting.html:148
+msgid "Vidalia Can't Stop Tor"
+msgstr ""
+
+# type: Content of: <html><body><p>
+#: en/troubleshooting.html:150
+msgid ""
+"If Vidalia cannot stop Tor, you should check your <a "
+"href=\"log.html\">message log</a> to see if Tor reported any errors while "
+"trying to exit."
+msgstr ""
diff --git a/so/bridges.po b/so/bridges.po
index bf647b4..6361219 100644
--- a/so/bridges.po
+++ b/so/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/so/config.po b/so/config.po
index 808d0e4..e428793 100644
--- a/so/config.po
+++ b/so/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/so/index.po b/so/index.po
index 72f06f3..5d7723a 100644
--- a/so/index.po
+++ b/so/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/so/links.po b/so/links.po
index d41d8f5..f703201 100644
--- a/so/links.po
+++ b/so/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/so/log.po b/so/log.po
index 424251b..063c816 100644
--- a/so/log.po
+++ b/so/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/so/netview.po b/so/netview.po
index d8f8ce5..65d6d95 100644
--- a/so/netview.po
+++ b/so/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/so/running.po b/so/running.po
index d0edd4e..9123ef3 100644
--- a/so/running.po
+++ b/so/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/so/server.po b/so/server.po
index 76ddd19..d71cb19 100644
--- a/so/server.po
+++ b/so/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/so/services.po b/so/services.po
index cc31565..08a6ad1 100644
--- a/so/services.po
+++ b/so/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/so/troubleshooting.po b/so/troubleshooting.po
index 4b9fe11..a900193 100644
--- a/so/troubleshooting.po
+++ b/so/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Somali (http://www.transifex.com/projects/p/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: so\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/son/bridges.po b/son/bridges.po
index 858ba10..8d1b31b 100644
--- a/son/bridges.po
+++ b/son/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/son/config.po b/son/config.po
index 3e3d81e..04cb8ae 100644
--- a/son/config.po
+++ b/son/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/son/index.po b/son/index.po
index 8eee946..4049dc6 100644
--- a/son/index.po
+++ b/son/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/son/links.po b/son/links.po
index 72d06bf..0a7f71e 100644
--- a/son/links.po
+++ b/son/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/son/log.po b/son/log.po
index cf48e95..a4f4976 100644
--- a/son/log.po
+++ b/son/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/son/netview.po b/son/netview.po
index 6097dc9..2c99ceb 100644
--- a/son/netview.po
+++ b/son/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/son/running.po b/son/running.po
index a5cd2d2..a815dbb 100644
--- a/son/running.po
+++ b/son/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/son/server.po b/son/server.po
index e2cff92..12410a8 100644
--- a/son/server.po
+++ b/son/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/son/services.po b/son/services.po
index f0153e6..ec8d0d5 100644
--- a/son/services.po
+++ b/son/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/son/troubleshooting.po b/son/troubleshooting.po
index b1c8f97..d16864a 100644
--- a/son/troubleshooting.po
+++ b/son/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:43+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Songhay (http://www.transifex.com/projects/p/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: son\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/st/bridges.po b/st/bridges.po
index a0a17ae..34cb575 100644
--- a/st/bridges.po
+++ b/st/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/st/config.po b/st/config.po
index aff0589..e813b1a 100644
--- a/st/config.po
+++ b/st/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/st/index.po b/st/index.po
index e7468ca..5c39981 100644
--- a/st/index.po
+++ b/st/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/st/links.po b/st/links.po
index 9096c2a..acfc36f 100644
--- a/st/links.po
+++ b/st/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/st/log.po b/st/log.po
index dafffa0..790b5c5 100644
--- a/st/log.po
+++ b/st/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/st/netview.po b/st/netview.po
index 4d79114..d07d390 100644
--- a/st/netview.po
+++ b/st/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/st/running.po b/st/running.po
index 6870e2f..8bd315b 100644
--- a/st/running.po
+++ b/st/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/st/server.po b/st/server.po
index 04ac166..dd7527a 100644
--- a/st/server.po
+++ b/st/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/st/services.po b/st/services.po
index 1936958..1bb8e73 100644
--- a/st/services.po
+++ b/st/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/st/troubleshooting.po b/st/troubleshooting.po
index a2c8433..60949fb 100644
--- a/st/troubleshooting.po
+++ b/st/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:50+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sotho, Southern (http://www.transifex.com/projects/p/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: st\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/su/bridges.po b/su/bridges.po
index 3e7ee48..11c1c5b 100644
--- a/su/bridges.po
+++ b/su/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/su/config.po b/su/config.po
index 4a25eae..23739b9 100644
--- a/su/config.po
+++ b/su/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/su/index.po b/su/index.po
index da87bc8..2c3be15 100644
--- a/su/index.po
+++ b/su/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/su/links.po b/su/links.po
index 370002a..c621abc 100644
--- a/su/links.po
+++ b/su/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/su/log.po b/su/log.po
index 4f30f34..314edd3 100644
--- a/su/log.po
+++ b/su/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/su/netview.po b/su/netview.po
index 73cdeb4..daf9e11 100644
--- a/su/netview.po
+++ b/su/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/su/running.po b/su/running.po
index 9387e20..b2c3a12 100644
--- a/su/running.po
+++ b/su/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/su/server.po b/su/server.po
index 0620327..638265c 100644
--- a/su/server.po
+++ b/su/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/su/services.po b/su/services.po
index b4176d5..006a0e8 100644
--- a/su/services.po
+++ b/su/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/su/troubleshooting.po b/su/troubleshooting.po
index 03fff4a..ba44b6f 100644
--- a/su/troubleshooting.po
+++ b/su/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:56+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Sundanese (http://www.transifex.com/projects/p/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: su\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/te/bridges.po b/te/bridges.po
index 9906555..8d9e95d 100644
--- a/te/bridges.po
+++ b/te/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/te/config.po b/te/config.po
index 760bca8..cc7fb24 100644
--- a/te/config.po
+++ b/te/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/te/index.po b/te/index.po
index 695cbc7..7a852d6 100644
--- a/te/index.po
+++ b/te/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/te/links.po b/te/links.po
index 0d91160..08daaed 100644
--- a/te/links.po
+++ b/te/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/te/log.po b/te/log.po
index 627af9d..778f146 100644
--- a/te/log.po
+++ b/te/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/te/netview.po b/te/netview.po
index 3906f68..2cdf625 100644
--- a/te/netview.po
+++ b/te/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/te/running.po b/te/running.po
index 2e0f534..5c516fd 100644
--- a/te/running.po
+++ b/te/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/te/server.po b/te/server.po
index c6c23c5..c807012 100644
--- a/te/server.po
+++ b/te/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/te/services.po b/te/services.po
index c95aeb1..dda337a 100644
--- a/te/services.po
+++ b/te/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/te/troubleshooting.po b/te/troubleshooting.po
index 03237a0..0c30f7a 100644
--- a/te/troubleshooting.po
+++ b/te/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Telugu (http://www.transifex.com/projects/p/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: te\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/tg/bridges.po b/tg/bridges.po
index b43bdc6..7f8ebff 100644
--- a/tg/bridges.po
+++ b/tg/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/tg/config.po b/tg/config.po
index 537489a..bcb0faa 100644
--- a/tg/config.po
+++ b/tg/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/tg/index.po b/tg/index.po
index e61eeb4..2a4d7a6 100644
--- a/tg/index.po
+++ b/tg/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/tg/links.po b/tg/links.po
index 362b0f2..7aaa4df 100644
--- a/tg/links.po
+++ b/tg/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/tg/log.po b/tg/log.po
index b22b2a5..6bb2219 100644
--- a/tg/log.po
+++ b/tg/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/tg/netview.po b/tg/netview.po
index e430a73..3920c85 100644
--- a/tg/netview.po
+++ b/tg/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/tg/running.po b/tg/running.po
index 7d5b265..653f924 100644
--- a/tg/running.po
+++ b/tg/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/tg/server.po b/tg/server.po
index d0fa9f7..b579fad 100644
--- a/tg/server.po
+++ b/tg/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/tg/services.po b/tg/services.po
index c9f52ce..530a100 100644
--- a/tg/services.po
+++ b/tg/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/tg/troubleshooting.po b/tg/troubleshooting.po
index 2cce5a9..8ee87bb 100644
--- a/tg/troubleshooting.po
+++ b/tg/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tajik (http://www.transifex.com/projects/p/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tg\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ti/bridges.po b/ti/bridges.po
index b858a2f..df97043 100644
--- a/ti/bridges.po
+++ b/ti/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ti/config.po b/ti/config.po
index 6b67253..88a1660 100644
--- a/ti/config.po
+++ b/ti/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ti/index.po b/ti/index.po
index 1b1c55b..9ae725e 100644
--- a/ti/index.po
+++ b/ti/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ti/links.po b/ti/links.po
index c1eba38..1bb67ac 100644
--- a/ti/links.po
+++ b/ti/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ti/log.po b/ti/log.po
index 088f3b3..2276a7d 100644
--- a/ti/log.po
+++ b/ti/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ti/netview.po b/ti/netview.po
index cc79bce..2c2e022 100644
--- a/ti/netview.po
+++ b/ti/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ti/running.po b/ti/running.po
index cc33864..e27ef86 100644
--- a/ti/running.po
+++ b/ti/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ti/server.po b/ti/server.po
index d2014e4..917a08c 100644
--- a/ti/server.po
+++ b/ti/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ti/services.po b/ti/services.po
index 5350110..42876bb 100644
--- a/ti/services.po
+++ b/ti/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ti/troubleshooting.po b/ti/troubleshooting.po
index 6ba915c..ecbde27 100644
--- a/ti/troubleshooting.po
+++ b/ti/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:45+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Tigrinya (http://www.transifex.com/projects/p/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ti\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/tk/bridges.po b/tk/bridges.po
index 6954b28..c129bf4 100644
--- a/tk/bridges.po
+++ b/tk/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/tk/config.po b/tk/config.po
index 6dd1870..39c28d9 100644
--- a/tk/config.po
+++ b/tk/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/tk/index.po b/tk/index.po
index 9da47b4..6bdb47b 100644
--- a/tk/index.po
+++ b/tk/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/tk/links.po b/tk/links.po
index db85dd4..19ae75a 100644
--- a/tk/links.po
+++ b/tk/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/tk/log.po b/tk/log.po
index dd8c6ea..46e134a 100644
--- a/tk/log.po
+++ b/tk/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/tk/netview.po b/tk/netview.po
index 95932cb..8615483 100644
--- a/tk/netview.po
+++ b/tk/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/tk/running.po b/tk/running.po
index f11b380..35463c5 100644
--- a/tk/running.po
+++ b/tk/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/tk/server.po b/tk/server.po
index 1a7f248..1c2859d 100644
--- a/tk/server.po
+++ b/tk/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/tk/services.po b/tk/services.po
index ef33079..9cc305f 100644
--- a/tk/services.po
+++ b/tk/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/tk/troubleshooting.po b/tk/troubleshooting.po
index 2f6f8e5..9f6dd6c 100644
--- a/tk/troubleshooting.po
+++ b/tk/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:44+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Turkmen (http://www.transifex.com/projects/p/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: tk\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ur/bridges.po b/ur/bridges.po
index 0091b06..e963081 100644
--- a/ur/bridges.po
+++ b/ur/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ur/config.po b/ur/config.po
index b3f1232..dc3b2e7 100644
--- a/ur/config.po
+++ b/ur/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ur/index.po b/ur/index.po
index 92e6abf..da30783 100644
--- a/ur/index.po
+++ b/ur/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ur/links.po b/ur/links.po
index 7cb8e50..107f51c 100644
--- a/ur/links.po
+++ b/ur/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ur/log.po b/ur/log.po
index 959817b..489b136 100644
--- a/ur/log.po
+++ b/ur/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ur/netview.po b/ur/netview.po
index cfdf232..c899853 100644
--- a/ur/netview.po
+++ b/ur/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ur/running.po b/ur/running.po
index 5aef649..cf57be7 100644
--- a/ur/running.po
+++ b/ur/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ur/server.po b/ur/server.po
index 82e3e23..8a2274b 100644
--- a/ur/server.po
+++ b/ur/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ur/services.po b/ur/services.po
index 917aae6..8a31136 100644
--- a/ur/services.po
+++ b/ur/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ur/troubleshooting.po b/ur/troubleshooting.po
index cf3501f..734fe77 100644
--- a/ur/troubleshooting.po
+++ b/ur/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:51+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Urdu (http://www.transifex.com/projects/p/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ur\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/ve/bridges.po b/ve/bridges.po
index ce16181..0c41c3a 100644
--- a/ve/bridges.po
+++ b/ve/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/ve/config.po b/ve/config.po
index 5e3e537..092151a 100644
--- a/ve/config.po
+++ b/ve/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/ve/index.po b/ve/index.po
index 3187f3b..60fadb3 100644
--- a/ve/index.po
+++ b/ve/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/ve/links.po b/ve/links.po
index c511081..7c58515 100644
--- a/ve/links.po
+++ b/ve/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/ve/log.po b/ve/log.po
index 63305d8..366e3b5 100644
--- a/ve/log.po
+++ b/ve/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/ve/netview.po b/ve/netview.po
index a50ec9b..d18e424 100644
--- a/ve/netview.po
+++ b/ve/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/ve/running.po b/ve/running.po
index 7c5a2d4..858738b 100644
--- a/ve/running.po
+++ b/ve/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/ve/server.po b/ve/server.po
index 52433dd..a0ec034 100644
--- a/ve/server.po
+++ b/ve/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/ve/services.po b/ve/services.po
index 18e6452..c8b3cc4 100644
--- a/ve/services.po
+++ b/ve/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/ve/troubleshooting.po b/ve/troubleshooting.po
index 71954c2..e6e8e91 100644
--- a/ve/troubleshooting.po
+++ b/ve/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Venda (http://www.transifex.com/projects/p/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: ve\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/wa/bridges.po b/wa/bridges.po
index d967de8..401ce8a 100644
--- a/wa/bridges.po
+++ b/wa/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/wa/config.po b/wa/config.po
index ee7457d..71fee1c 100644
--- a/wa/config.po
+++ b/wa/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/wa/index.po b/wa/index.po
index 4052d57..7b6c21b 100644
--- a/wa/index.po
+++ b/wa/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/wa/links.po b/wa/links.po
index 4ab51c4..fde6022 100644
--- a/wa/links.po
+++ b/wa/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/wa/log.po b/wa/log.po
index 09efdd4..1a39d92 100644
--- a/wa/log.po
+++ b/wa/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/wa/netview.po b/wa/netview.po
index df73e96..1132a77 100644
--- a/wa/netview.po
+++ b/wa/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/wa/running.po b/wa/running.po
index 98e4bd9..171de71 100644
--- a/wa/running.po
+++ b/wa/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/wa/server.po b/wa/server.po
index fce544a..3a106a9 100644
--- a/wa/server.po
+++ b/wa/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/wa/services.po b/wa/services.po
index 926ad4a..0c2b661 100644
--- a/wa/services.po
+++ b/wa/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/wa/troubleshooting.po b/wa/troubleshooting.po
index 934ea71..2bc30c8 100644
--- a/wa/troubleshooting.po
+++ b/wa/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:54+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Walloon (http://www.transifex.com/projects/p/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wa\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/wo/bridges.po b/wo/bridges.po
index 497c553..42da876 100644
--- a/wo/bridges.po
+++ b/wo/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/wo/config.po b/wo/config.po
index ce38704..742ce17 100644
--- a/wo/config.po
+++ b/wo/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/wo/index.po b/wo/index.po
index f9b5080..eabb127 100644
--- a/wo/index.po
+++ b/wo/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/wo/links.po b/wo/links.po
index 879f451..d033457 100644
--- a/wo/links.po
+++ b/wo/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/wo/log.po b/wo/log.po
index 96efe94..17c5337 100644
--- a/wo/log.po
+++ b/wo/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/wo/netview.po b/wo/netview.po
index ff7bddd..fa8b821 100644
--- a/wo/netview.po
+++ b/wo/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/wo/running.po b/wo/running.po
index cbedc43..8a5c140 100644
--- a/wo/running.po
+++ b/wo/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/wo/server.po b/wo/server.po
index 08498cc..9ea862c 100644
--- a/wo/server.po
+++ b/wo/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/wo/services.po b/wo/services.po
index f2ef702..c3cf278 100644
--- a/wo/services.po
+++ b/wo/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/wo/troubleshooting.po b/wo/troubleshooting.po
index 9419e0c..4b38d3f 100644
--- a/wo/troubleshooting.po
+++ b/wo/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:55+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Wolof (http://www.transifex.com/projects/p/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: wo\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/zh_HK/bridges.po b/zh_HK/bridges.po
index ad14e32..9ede30c 100644
--- a/zh_HK/bridges.po
+++ b/zh_HK/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/zh_HK/config.po b/zh_HK/config.po
index 4f8c12d..825d06b 100644
--- a/zh_HK/config.po
+++ b/zh_HK/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/zh_HK/index.po b/zh_HK/index.po
index 7bc98ae..0bc9c5e 100644
--- a/zh_HK/index.po
+++ b/zh_HK/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/zh_HK/links.po b/zh_HK/links.po
index 4de4c9b..01add59 100644
--- a/zh_HK/links.po
+++ b/zh_HK/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/zh_HK/log.po b/zh_HK/log.po
index f196ca8..af8d797 100644
--- a/zh_HK/log.po
+++ b/zh_HK/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/zh_HK/netview.po b/zh_HK/netview.po
index 776aef8..2d889f3 100644
--- a/zh_HK/netview.po
+++ b/zh_HK/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/zh_HK/running.po b/zh_HK/running.po
index 4fac5bb..0ef438b 100644
--- a/zh_HK/running.po
+++ b/zh_HK/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/zh_HK/server.po b/zh_HK/server.po
index 8028d67..080a153 100644
--- a/zh_HK/server.po
+++ b/zh_HK/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/zh_HK/services.po b/zh_HK/services.po
index 6b0168a..384d9db 100644
--- a/zh_HK/services.po
+++ b/zh_HK/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/zh_HK/troubleshooting.po b/zh_HK/troubleshooting.po
index 5485df3..196abf8 100644
--- a/zh_HK/troubleshooting.po
+++ b/zh_HK/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:52+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/projects/p/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_HK\n"
-"Plural-Forms: nplurals=1; plural=0\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
diff --git a/zu/bridges.po b/zu/bridges.po
index 894393e..af37732 100644
--- a/zu/bridges.po
+++ b/zu/bridges.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/bridges.html:16
@@ -98,5 +98,3 @@ msgid ""
"Configuring more than one bridge address will make your Tor connection more "
"stable, in case some of the bridges become unreachable."
msgstr ""
-
-
diff --git a/zu/config.po b/zu/config.po
index a18016e..323607e 100644
--- a/zu/config.po
+++ b/zu/config.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:58+0200\n"
-"PO-Revision-Date: 2010-12-21 22:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/config.html:16
@@ -135,14 +135,10 @@ msgstr ""
#. type: Content of: <html><body><ul><li>
#: en/config.html:89
msgid ""
-"Even if you do not know any bridge relay addresses, checking this checkbox "
-"may still be helpful. Tor will encrypt its directory requests, which can "
-"defeat blocking mechanisms that try to filter Tor's requests for information"
-" about other relays. If connections to normal Tor relays are also blocked, "
-"then you will need to learn a bridge relay address somehow and add it here. "
-"See the help topic on <a href=\"bridges.html#finding\">finding bridge "
-"relays</a> for more information on how to learn new bridge relay addresses "
-"and fingerprints."
+"If connections to normal Tor relays are blocked, then you will need to learn"
+" a bridge relay address somehow and add it here. See the help topic on <a "
+"href=\"bridges.html#finding\">finding bridge relays</a> for more information"
+" on how to learn new bridge relay addresses and fingerprints."
msgstr ""
#. type: Content of: <html><body>
@@ -302,5 +298,3 @@ msgid ""
"Hidden services allow you to provide any kind of TCP-based service, e.g. an"
" HTTP service, to others without revealing your IP address."
msgstr ""
-
-
diff --git a/zu/index.po b/zu/index.po
index cdea17a..472c608 100644
--- a/zu/index.po
+++ b/zu/index.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 16:59+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/index.html:16
@@ -44,5 +44,3 @@ msgid ""
"See the <a href=\"links.html\">Helpful Links</a> topic for some places you "
"can visit to find additional help and information about Vidalia and Tor."
msgstr ""
-
-
diff --git a/zu/links.po b/zu/links.po
index c493dbf..aad7594 100644
--- a/zu/links.po
+++ b/zu/links.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2011-05-05 20:21+0200\n"
-"PO-Revision-Date: 2010-11-30 05:02+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: links.html:16
@@ -77,5 +77,3 @@ msgstr ""
#: links.html:60
msgid "<a href=\"https://trac.torproject.org/\"> https://trac.torproject.org/</a>"
msgstr ""
-
-
diff --git a/zu/log.po b/zu/log.po
index 55c976d..aa0b3e0 100644
--- a/zu/log.po
+++ b/zu/log.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/log.html:16
@@ -157,5 +157,3 @@ msgstr ""
#: en/log.html:100
msgid "Click <i>Save Settings</i> to save your log destination."
msgstr ""
-
-
diff --git a/zu/netview.po b/zu/netview.po
index 496f209..497f423 100644
--- a/zu/netview.po
+++ b/zu/netview.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/netview.html:16
@@ -245,5 +245,3 @@ msgstr ""
#: en/netview.html:168
msgid "Date this relay's information was last updated."
msgstr ""
-
-
diff --git a/zu/running.po b/zu/running.po
index a8e9d7b..2deb70f 100644
--- a/zu/running.po
+++ b/zu/running.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/running.html:16
@@ -147,5 +147,3 @@ msgid ""
"You can also check the <a href=\"log.html\">message log</a> for details "
"about any problems Tor encountered before it exited."
msgstr ""
-
-
diff --git a/zu/server.po b/zu/server.po
index 2a02d79..d4b2e97 100644
--- a/zu/server.po
+++ b/zu/server.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/server.html:16
@@ -401,5 +401,3 @@ msgid ""
"<i>Directory Port</i>. The <i>Directory Port</i> is set to port 9030 by "
"default on all operating systems."
msgstr ""
-
-
diff --git a/zu/services.po b/zu/services.po
index 8f3396e..3a0c79e 100644
--- a/zu/services.po
+++ b/zu/services.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-06-26 17:00+0200\n"
-"PO-Revision-Date: 2010-11-30 05:03+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: Content of: <html><body><h1>
#: en/services.html:16
@@ -244,5 +244,3 @@ msgid ""
"client application if it's not a web service), and Tor does the rest for "
"you. There is no need to specifically configure Tor for that."
msgstr ""
-
-
diff --git a/zu/troubleshooting.po b/zu/troubleshooting.po
index 4b28e14..a13309a 100644
--- a/zu/troubleshooting.po
+++ b/zu/troubleshooting.po
@@ -5,14 +5,14 @@ msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n"
"POT-Creation-Date: 2010-08-03 15:49-0300\n"
-"PO-Revision-Date: 2010-11-30 05:04+0000\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL(a)li.org>\n"
+"PO-Revision-Date: 2013-09-16 17:53+0000\n"
+"Last-Translator: Tor Project <support-team-private(a)lists.torproject.org>\n"
+"Language-Team: Zulu (http://www.transifex.com/projects/p/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zu\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
# type: Content of: <html><body><h1>
#: en/troubleshooting.html:16
@@ -241,5 +241,3 @@ msgid ""
"href=\"log.html\">message log</a> to see if Tor reported any errors while "
"trying to exit."
msgstr ""
-
-
commit 8e7f41313dedadb4e56abbd8c5a3b250a84aa9d4
Author: Translation commit bot <translation(a)torproject.org>
Date: Mon Sep 16 18:49:37 2013 +0000
Update translations for tsum
---
ak/short-user-manual_ak_noimg.xhtml | 132 ++++++++++++++++++++
am/short-user-manual_am_noimg.xhtml | 132 ++++++++++++++++++++
arn/short-user-manual_arn_noimg.xhtml | 132 ++++++++++++++++++++
be/short-user-manual_be_noimg.xhtml | 132 ++++++++++++++++++++
bn/short-user-manual_bn_noimg.xhtml | 132 ++++++++++++++++++++
bo/short-user-manual_bo_noimg.xhtml | 132 ++++++++++++++++++++
br/short-user-manual_br_noimg.xhtml | 132 ++++++++++++++++++++
csb/short-user-manual_csb_noimg.xhtml | 132 ++++++++++++++++++++
dz/short-user-manual_dz_noimg.xhtml | 132 ++++++++++++++++++++
fo/short-user-manual_fo_noimg.xhtml | 132 ++++++++++++++++++++
fur/short-user-manual_fur_noimg.xhtml | 132 ++++++++++++++++++++
fy/short-user-manual_fy_noimg.xhtml | 132 ++++++++++++++++++++
ga/short-user-manual_ga_noimg.xhtml | 132 ++++++++++++++++++++
gun/short-user-manual_gun_noimg.xhtml | 132 ++++++++++++++++++++
ha/short-user-manual_ha_noimg.xhtml | 132 ++++++++++++++++++++
ht/short-user-manual_ht_noimg.xhtml | 132 ++++++++++++++++++++
hy/short-user-manual_hy_noimg.xhtml | 132 ++++++++++++++++++++
jv/short-user-manual_jv_noimg.xhtml | 132 ++++++++++++++++++++
km/short-user-manual_km_noimg.xhtml | 132 ++++++++++++++++++++
kw/short-user-manual_kw_noimg.xhtml | 132 ++++++++++++++++++++
lb/short-user-manual_lb_noimg.xhtml | 132 ++++++++++++++++++++
lg/short-user-manual_lg_noimg.xhtml | 132 ++++++++++++++++++++
ln/short-user-manual_ln_noimg.xhtml | 132 ++++++++++++++++++++
lo/short-user-manual_lo_noimg.xhtml | 132 ++++++++++++++++++++
mg/short-user-manual_mg_noimg.xhtml | 132 ++++++++++++++++++++
mi/short-user-manual_mi_noimg.xhtml | 132 ++++++++++++++++++++
ml/short-user-manual_ml_noimg.xhtml | 132 ++++++++++++++++++++
mn/short-user-manual_mn_noimg.xhtml | 132 ++++++++++++++++++++
mt/short-user-manual_mt_noimg.xhtml | 132 ++++++++++++++++++++
nah/short-user-manual_nah_noimg.xhtml | 132 ++++++++++++++++++++
nap/short-user-manual_nap_noimg.xhtml | 132 ++++++++++++++++++++
ne/short-user-manual_ne_noimg.xhtml | 132 ++++++++++++++++++++
nn/short-user-manual_nn_noimg.xhtml | 132 ++++++++++++++++++++
nso/short-user-manual_nso_noimg.xhtml | 132 ++++++++++++++++++++
oc/short-user-manual_oc_noimg.xhtml | 132 ++++++++++++++++++++
or/short-user-manual_or_noimg.xhtml | 132 ++++++++++++++++++++
pap/short-user-manual_pap_noimg.xhtml | 132 ++++++++++++++++++++
pms/short-user-manual_pms_noimg.xhtml | 132 ++++++++++++++++++++
ps/short-user-manual_ps_noimg.xhtml | 132 ++++++++++++++++++++
.../short-user-manual_ru(a)petr1708_noimg.xhtml | 132 ++++++++++++++++++++
so/short-user-manual_so_noimg.xhtml | 132 ++++++++++++++++++++
son/short-user-manual_son_noimg.xhtml | 132 ++++++++++++++++++++
st/short-user-manual_st_noimg.xhtml | 132 ++++++++++++++++++++
su/short-user-manual_su_noimg.xhtml | 132 ++++++++++++++++++++
te/short-user-manual_te_noimg.xhtml | 132 ++++++++++++++++++++
tg/short-user-manual_tg_noimg.xhtml | 132 ++++++++++++++++++++
ti/short-user-manual_ti_noimg.xhtml | 132 ++++++++++++++++++++
tk/short-user-manual_tk_noimg.xhtml | 132 ++++++++++++++++++++
ur/short-user-manual_ur_noimg.xhtml | 132 ++++++++++++++++++++
ve/short-user-manual_ve_noimg.xhtml | 132 ++++++++++++++++++++
wa/short-user-manual_wa_noimg.xhtml | 132 ++++++++++++++++++++
wo/short-user-manual_wo_noimg.xhtml | 132 ++++++++++++++++++++
zh_HK/short-user-manual_zh_HK_noimg.xhtml | 132 ++++++++++++++++++++
zu/short-user-manual_zu_noimg.xhtml | 132 ++++++++++++++++++++
54 files changed, 7128 insertions(+)
diff --git a/ak/short-user-manual_ak_noimg.xhtml b/ak/short-user-manual_ak_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ak/short-user-manual_ak_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/am/short-user-manual_am_noimg.xhtml b/am/short-user-manual_am_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/am/short-user-manual_am_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/arn/short-user-manual_arn_noimg.xhtml b/arn/short-user-manual_arn_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/arn/short-user-manual_arn_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/be/short-user-manual_be_noimg.xhtml b/be/short-user-manual_be_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/be/short-user-manual_be_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/bn/short-user-manual_bn_noimg.xhtml b/bn/short-user-manual_bn_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/bn/short-user-manual_bn_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/bo/short-user-manual_bo_noimg.xhtml b/bo/short-user-manual_bo_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/bo/short-user-manual_bo_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/br/short-user-manual_br_noimg.xhtml b/br/short-user-manual_br_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/br/short-user-manual_br_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/csb/short-user-manual_csb_noimg.xhtml b/csb/short-user-manual_csb_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/csb/short-user-manual_csb_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/dz/short-user-manual_dz_noimg.xhtml b/dz/short-user-manual_dz_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/dz/short-user-manual_dz_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/fo/short-user-manual_fo_noimg.xhtml b/fo/short-user-manual_fo_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/fo/short-user-manual_fo_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/fur/short-user-manual_fur_noimg.xhtml b/fur/short-user-manual_fur_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/fur/short-user-manual_fur_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/fy/short-user-manual_fy_noimg.xhtml b/fy/short-user-manual_fy_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/fy/short-user-manual_fy_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ga/short-user-manual_ga_noimg.xhtml b/ga/short-user-manual_ga_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ga/short-user-manual_ga_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/gun/short-user-manual_gun_noimg.xhtml b/gun/short-user-manual_gun_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/gun/short-user-manual_gun_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ha/short-user-manual_ha_noimg.xhtml b/ha/short-user-manual_ha_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ha/short-user-manual_ha_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ht/short-user-manual_ht_noimg.xhtml b/ht/short-user-manual_ht_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ht/short-user-manual_ht_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/hy/short-user-manual_hy_noimg.xhtml b/hy/short-user-manual_hy_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/hy/short-user-manual_hy_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/jv/short-user-manual_jv_noimg.xhtml b/jv/short-user-manual_jv_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/jv/short-user-manual_jv_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/km/short-user-manual_km_noimg.xhtml b/km/short-user-manual_km_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/km/short-user-manual_km_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/kw/short-user-manual_kw_noimg.xhtml b/kw/short-user-manual_kw_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/kw/short-user-manual_kw_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/lb/short-user-manual_lb_noimg.xhtml b/lb/short-user-manual_lb_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/lb/short-user-manual_lb_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/lg/short-user-manual_lg_noimg.xhtml b/lg/short-user-manual_lg_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/lg/short-user-manual_lg_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ln/short-user-manual_ln_noimg.xhtml b/ln/short-user-manual_ln_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ln/short-user-manual_ln_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/lo/short-user-manual_lo_noimg.xhtml b/lo/short-user-manual_lo_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/lo/short-user-manual_lo_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/mg/short-user-manual_mg_noimg.xhtml b/mg/short-user-manual_mg_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/mg/short-user-manual_mg_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/mi/short-user-manual_mi_noimg.xhtml b/mi/short-user-manual_mi_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/mi/short-user-manual_mi_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ml/short-user-manual_ml_noimg.xhtml b/ml/short-user-manual_ml_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ml/short-user-manual_ml_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/mn/short-user-manual_mn_noimg.xhtml b/mn/short-user-manual_mn_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/mn/short-user-manual_mn_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/mt/short-user-manual_mt_noimg.xhtml b/mt/short-user-manual_mt_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/mt/short-user-manual_mt_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/nah/short-user-manual_nah_noimg.xhtml b/nah/short-user-manual_nah_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/nah/short-user-manual_nah_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/nap/short-user-manual_nap_noimg.xhtml b/nap/short-user-manual_nap_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/nap/short-user-manual_nap_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ne/short-user-manual_ne_noimg.xhtml b/ne/short-user-manual_ne_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ne/short-user-manual_ne_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/nn/short-user-manual_nn_noimg.xhtml b/nn/short-user-manual_nn_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/nn/short-user-manual_nn_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/nso/short-user-manual_nso_noimg.xhtml b/nso/short-user-manual_nso_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/nso/short-user-manual_nso_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/oc/short-user-manual_oc_noimg.xhtml b/oc/short-user-manual_oc_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/oc/short-user-manual_oc_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/or/short-user-manual_or_noimg.xhtml b/or/short-user-manual_or_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/or/short-user-manual_or_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/pap/short-user-manual_pap_noimg.xhtml b/pap/short-user-manual_pap_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/pap/short-user-manual_pap_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/pms/short-user-manual_pms_noimg.xhtml b/pms/short-user-manual_pms_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/pms/short-user-manual_pms_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ps/short-user-manual_ps_noimg.xhtml b/ps/short-user-manual_ps_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ps/short-user-manual_ps_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ru@petr1708/short-user-manual_ru@petr1708_noimg.xhtml b/ru@petr1708/short-user-manual_ru@petr1708_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ru@petr1708/short-user-manual_ru@petr1708_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/so/short-user-manual_so_noimg.xhtml b/so/short-user-manual_so_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/so/short-user-manual_so_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/son/short-user-manual_son_noimg.xhtml b/son/short-user-manual_son_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/son/short-user-manual_son_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/st/short-user-manual_st_noimg.xhtml b/st/short-user-manual_st_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/st/short-user-manual_st_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/su/short-user-manual_su_noimg.xhtml b/su/short-user-manual_su_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/su/short-user-manual_su_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/te/short-user-manual_te_noimg.xhtml b/te/short-user-manual_te_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/te/short-user-manual_te_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/tg/short-user-manual_tg_noimg.xhtml b/tg/short-user-manual_tg_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/tg/short-user-manual_tg_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ti/short-user-manual_ti_noimg.xhtml b/ti/short-user-manual_ti_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ti/short-user-manual_ti_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/tk/short-user-manual_tk_noimg.xhtml b/tk/short-user-manual_tk_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/tk/short-user-manual_tk_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ur/short-user-manual_ur_noimg.xhtml b/ur/short-user-manual_ur_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ur/short-user-manual_ur_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/ve/short-user-manual_ve_noimg.xhtml b/ve/short-user-manual_ve_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/ve/short-user-manual_ve_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/wa/short-user-manual_wa_noimg.xhtml b/wa/short-user-manual_wa_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/wa/short-user-manual_wa_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/wo/short-user-manual_wo_noimg.xhtml b/wo/short-user-manual_wo_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/wo/short-user-manual_wo_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/zh_HK/short-user-manual_zh_HK_noimg.xhtml b/zh_HK/short-user-manual_zh_HK_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/zh_HK/short-user-manual_zh_HK_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>
diff --git a/zu/short-user-manual_zu_noimg.xhtml b/zu/short-user-manual_zu_noimg.xhtml
new file mode 100644
index 0000000..681e5b7
--- /dev/null
+++ b/zu/short-user-manual_zu_noimg.xhtml
@@ -0,0 +1,132 @@
+<html xmlns="http://www.w3.org/1999/xhtml">
+ <head>
+ <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
+ <title/>
+ </head>
+ <body>
+ <h1 id="the-short-user-manual">The Short User Manual</h1>
+ <p>This user manual contains information about how to download Tor, how to use it, and what to do if Tor is unable to connect to the network. If you can't find the answer to your question in this document, email help(a)rt.torproject.org.</p>
+ <p>Please note that we are providing support on a voluntary basis, and we get a lot of emails every single day. There is no need to worry if we don't get back to you straight away.</p>
+ <h2 id="how-tor-works">How Tor works</h2>
+ <p>Tor is a network of virtual tunnels that allows you to improve your privacy and security on the Internet. Tor works by sending your traffic through three random servers (also known as <em>relays</em>) in the Tor network, before the traffic is sent out onto the public Internet.</p>
+ <p>The image above illustrates a user browsing to different websites over Tor. The green monitors represent relays in the Tor network, while the three keys represent the layers of encryption between the user and each relay.</p>
+ <p>Tor will anonymize the origin of your traffic, and it will encrypt everything between you and the Tor network. Tor will also encrypt your traffic inside the Tor network, but it cannot encrypt your traffic between the Tor network and its final destination.</p>
+ <p>If you are communicating sensitive information, for example when logging on to a website with a username and password, make sure that you are using HTTPS (e.g. <strong>https</strong>://torproject.org/, not <strong>http</strong>://torproject.org/).</p>
+ <h2 id="how-to-download-tor">How to download Tor</h2>
+ <p>The bundle we recommend to most users is the <a href="https://www.torproject.org/projects/torbrowser.html">Tor Browser Bundle</a>. This bundle contains a browser preconfigured to safely browse the Internet through Tor, and requires no installation. You download the bundle, extract the archive, and start Tor.</p>
+ <p>There are two different ways to get hold of the Tor software. You can either browse to the <a href="https://www.torproject.org/">Tor Project website</a> and download it there, or you can use GetTor, the email autoresponder.</p>
+ <h3 id="how-to-get-tor-via-email">How to get Tor via email</h3>
+ <p>To receive the English Tor Browser Bundle for Windows, send an email to gettor(a)torproject.org with <strong>windows</strong> in the body of the message. You can leave the subject blank.</p>
+ <p>You can also request the Tor Browser Bundle for Mac OS X (write <strong>macos-i386</strong>), and Linux (write <strong>linux-i386</strong> for 32-bit systems or <strong>linux-x86_64</strong> for 64-bit systems).</p>
+ <p>If you want a translated version of Tor, write <strong>help</strong> instead. You will then receive an email with instructions and a list of available languages.</p>
+ <p><strong>Note</strong>: The Tor Browser Bundles for Linux and Mac OS X are rather large, and you will not be able to receive any of these bundles with a Gmail, Hotmail or Yahoo account. If you cannot receive the bundle you want, send an email to help(a)rt.torproject.org and we will give you a list of website mirrors to use.</p>
+ <h3 id="tor-for-smartphones">Tor for smartphones</h3>
+ <p>You can get Tor on your Android device by installing the package named <em>Orbot</em>. For information about how to download and install Orbot, please see the <a href="https://www.torproject.org/docs/android.html.en">Tor Project website</a>.</p>
+ <p>We also have experimental packages for <a href="https://www.torproject.org/docs/N900.html.en">Nokia Maemo/N900</a> and <a href="http://sid77.slackware.it/iphone/">Apple iOS</a>.</p>
+ <h3 id="how-to-verify-that-you-have-the-right-version">How to verify that you have the right version</h3>
+ <p>Before running the Tor Browser Bundle, you should make sure that you have the right version.</p>
+ <p>The software you receive is accompanied by a file with the same name as the bundle and the extension <strong>.asc</strong>. This .asc file is a GPG signature, and will allow you to verify the file you've downloaded is exactly the one that we intended you to get.</p>
+ <p>Before you can verify the signature, you will have to download and install GnuPG:</p>
+ <p><strong>Windows</strong>: <a href="http://gpg4win.org/download.html">http://gpg4win.org/download.html</a><br/><strong>Mac OS X</strong>: <a href="http://macgpg.sourceforge.net/">http://macgpg.sourceforge.net/</a><br/><strong>Linux</strong>: Most Linux distributions come with GnuPG preinstalled.</p>
+ <p>Please note that you may need to edit the paths and the commands used below to get it to work on your system.</p>
+ <p>Erinn Clark signs the Tor Browser Bundles with key 0x63FEE659. To import Erinn's key, run:</p>
+ <pre>
+ <code>gpg --keyserver hkp://keys.gnupg.net --recv-keys 0x63FEE659
+</code>
+ </pre>
+ <p>After importing the key, verify that the fingerprint is correct:</p>
+ <pre>
+ <code>gpg --fingerprint 0x63FEE659
+</code>
+ </pre>
+ <p>You should see:</p>
+ <pre>
+ <code>pub 2048R/63FEE659 2003-10-16
+ Key fingerprint = 8738 A680 B84B 3031 A630 F2DB 416F 0610 63FE E659
+uid Erinn Clark <erinn(a)torproject.org>
+uid Erinn Clark <erinn(a)debian.org>
+
+uid Erinn Clark <erinn(a)double-helix.org>
+sub 2048R/EB399FD7 2003-10-16
+</code>
+ </pre>
+ <p>To verify the signature of the package you downloaded, run the following command:</p>
+ <pre>
+ <code>gpg --verify tor-browser-2.2.33-2_en-US.exe.asc tor-browser-2.2.33-2_en-US.exe
+</code>
+ </pre>
+ <p>The output should say <em>"Good signature"</em>. A bad signature means that the file may have been tampered with. If you see a bad signature, send details about where you downloaded the package from, how you verified the signature, and the output from GnuPG in an email to help(a)rt.torproject.org.</p>
+ <p>Once you have verified the signature and seen the <em>"Good signature"</em> output, go ahead and extract the package archive. You should then see a directory similar to <strong>tor-browser_en-US</strong>. Inside that directory is another directory called <strong>Docs</strong>, which contains a file called <strong>changelog</strong>. You want to make sure that the version number on the top line of the changelog file matches the version number in the filename.</p>
+ <h3 id="how-to-use-the-tor-browser-bundle">How to use the Tor Browser Bundle</h3>
+ <p>After downloading the Tor Browser Bundle and extracting the package, you should have a directory with a few files in it. One of the files is an executable called "Start Tor Browser" (or "start-tor-browser", depending on your operating system).</p>
+ <p>When you start the Tor Browser Bundle, you will first see Vidalia start up and connect you to the Tor network. After that, you will see a browser confirming that you are now using Tor. This is done by displaying <a href="https://check.torproject.org/">https://check.torproject.org/</a>. You can now browse the Internet through Tor.</p>
+ <p>
+ <em>Please note that it is important that you use the browser that comes with the bundle, and not your own browser.</em>
+ </p>
+ <h3 id="what-to-do-when-tor-does-not-connect">What to do when Tor does not connect</h3>
+ <p>Some users will notice that Vidalia gets stuck when trying to connect to the Tor network. If this happens, make sure that you are connected to the Internet. If you need to connect to a proxy server, see <em>How to use an open proxy</em> below.</p>
+ <p>If your normal Internet connection is working, but Tor still can't connect to the network, try the following; open the Vidalia control panel, click on <em>Message Log</em> and select the <em>Advanced</em> tab. It may be that Tor won't connect because:</p>
+ <p><strong>Your system clock is off</strong>: Make sure that the date and time on your system is correct, and restart Tor. You may need to synchronize your system clock with an Internet time server.</p>
+ <p><strong>You are behind a restrictive firewall</strong>: To tell Tor to only try port 80 and port 443, open the Vidalia control panel, click on <em>Settings</em> and <em>Network</em>, and tick the box that says <em>My firewall only lets me connect to certain ports</em>.</p>
+ <p><strong>Your anti-virus program is blocking Tor</strong>: Make sure that your anti-virus program is not preventing Tor from making network connections.</p>
+ <p>If Tor still doesn't work, it's likely that your Internet Service Provider (ISP) is blocking Tor. Very often this can be worked around with <strong>Tor bridges</strong>, hidden relays that aren't as easy to block.</p>
+ <p>If you need help with figuring out why Tor can't connect, send an email to help(a)rt.torproject.org and include the relevant parts from the log file.</p>
+ <h3 id="how-to-find-a-bridge">How to find a bridge</h3>
+ <p>To use a bridge, you will first have to locate one; you can either browse to <a href="https://bridges.torproject.org/">bridges.torproject.org</a>, or you can send an email to bridges(a)torproject.org. If you do send an email, please make sure that you write <strong>get bridges</strong> in the body of the email. Without this, you will not get a reply. Note that you need to send this email from either a gmail.com or a yahoo.com address.</p>
+ <p>Configuring more than one bridge address will make your Tor connection more stable, in case some of the bridges become unreachable. There is no guarantee that the bridge you are using now will work tomorrow, so you should make a habit of updating your list of bridges every so often.</p>
+ <h3 id="how-to-use-a-bridge">How to use a bridge</h3>
+ <p>Once you have a set of bridges to use, open the Vidalia control panel, click on <em>Settings</em>, <em>Network</em> and tick the box that says <em>My ISP blocks connections to the Tor network</em>. Enter the bridges in the box below, hit <em>OK</em> and start Tor again.</p>
+ <h3 id="how-to-use-an-open-proxy">How to use an open proxy</h3>
+ <p>If using a bridge does not work, try configuring Tor to use any HTTPS or SOCKS proxy to get access to the Tor network. This means even if Tor is blocked by your local network, open proxies can be safely used to connect to the Tor Network and on to the uncensored Internet.</p>
+ <p>The steps below assume you have a functional Tor/Vidalia configuration, and you have found a list of HTTPS, SOCKS4, or SOCKS5 proxies.</p>
+ <ol style="list-style-type: decimal">
+ <li>Open the Vidalia control panel, click on <em>Settings</em>.</li>
+ <li>Click <em>Network</em>. Select <em>I use a proxy to access the Internet</em>.</li>
+ <li>On the <em>Address</em> line, enter the open proxy address. This can be a hostname or an IP Address.</li>
+ <li>Enter the port for the proxy.</li>
+ <li>Generally, you do not need a username and password. If you do, enter the information in the proper fields.</li>
+ <li>Choose the <em>Type</em> of proxy you are using, whether HTTP/HTTPS, SOCKS4, or SOCKS5.</li>
+ <li>Push the <em>OK</em> button. Vidalia and Tor are now configured to use a proxy to access the rest of the Tor network.</li>
+ </ol>
+ <h2 id="frequently-asked-questions">Frequently Asked Questions</h2>
+ <p>This section will answer some of the most common questions. If your question is not mentioned here, please send an email to help(a)rt.torproject.org.</p>
+ <h3 id="unable-to-extract-the-archive">Unable to extract the archive</h3>
+ <p>If you are using Windows and find that you cannot extract the archive, download and install <a href="http://www.7-zip.org/">7-Zip</a>.</p>
+ <p>If you are unable to download 7-Zip, try to rename the file from .z to .zip and use winzip to extract the archive. Before renaming the file, tell Windows to show file extensions:</p>
+ <h4 id="windows-xp">Windows XP</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>My Computer</em></li>
+ <li>Click on <em>Tools</em> and choose <em>Folder Options...</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-vista">Windows Vista</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h4 id="windows-7">Windows 7</h4>
+ <ol style="list-style-type: decimal">
+ <li>Open <em>Computer</em></li>
+ <li>Click on <em>Organize</em> and choose <em>Folder and search options</em> in the menu</li>
+ <li>Click on the <em>View</em> tab</li>
+ <li>Uncheck <em>Hide extensions for known file types</em> and click <em>OK</em></li>
+ </ol>
+ <h3 id="vidalia-asks-for-a-password">Vidalia asks for a password</h3>
+ <p>You should not have to enter a password when starting Vidalia. If you are prompted for one, you are likely affected by one of these problems:</p>
+ <p><strong>You are already running Vidalia and Tor</strong>: For example, this situation can happen if you installed the Vidalia bundle and now you're trying to run the Tor Browser Bundle. In that case, you will need to close the old Vidalia and Tor before you can run this one.</p>
+ <p><strong>Vidalia crashed, but left Tor running</strong>: If the dialog that prompts you for a control password has a Reset button, you can click the button and Vidalia will restart Tor with a new random control password. If you do not see a Reset button, or if Vidalia is unable to restart Tor for you; go into your process or task manager, and terminate the Tor process. Then use Vidalia to restart Tor.</p>
+ <p>For more information, see the <a href="https://torproject.org/docs/faq.html#VidaliaPassword">FAQ</a> on the Tor Project website.</p>
+ <h3 id="flash-does-not-work">Flash does not work</h3>
+ <p>For security reasons, Flash, Java, and other plugins are currently disabled for Tor. Plugins operate independently from Firefox and can perform activity on your computer that ruins your anonymity.</p>
+ <p>Most YouTube videos work with HTML5, and it is possible to view these videos over Tor. You need to join the <a href="https://www.youtube.com/html5">HTML5 trial</a> on the YouTube website before you can use the HTML5 player.</p>
+ <p>Note that the browser will not remember that you joined the trial once you close it, so you will need to re-join the trial the next time you run the Tor Browser Bundle.</p>
+ <p>Please see the <a href="https://www.torproject.org/torbutton/torbutton-faq.html#noflash">Torbutton FAQ</a> for more information.</p>
+ <h3 id="i-want-to-use-another-browser">I want to use another browser</h3>
+ <p>For security reasons, we recommend that you only browse the web through Tor using the Tor Browser Bundle. It is technically possible to use Tor with other browsers, but by doing so you open yourself up to potential attacks.</p>
+ <h3 id="why-tor-is-slow">Why Tor is slow</h3>
+ <p>Tor can sometimes be a bit slower than your normal Internet connection. After all, your traffic is sent through many different countries, sometimes across oceans around the world!</p>
+ </body>
+</html>