tor-commits

tor-commits@lists.torproject.org

December 2012

17 participants
1601 discussions

[orbot/master] removed privoxy source
by n8fr8＠torproject.org 24 Oct '25

24 Oct '25

commit a8fab5e851e1f9c082c4902132ee81c461bd11a1 Author: n8fr8 <nathan(a)freitas.net> Date: Fri Jul 6 14:53:01 2012 -0400 removed privoxy source --- external/privoxy/AUTHORS | 116 - external/privoxy/ChangeLog | 717 -- external/privoxy/GNUmakefile.in | 2156 ----- external/privoxy/INSTALL | 173 - external/privoxy/LICENSE | 339 - external/privoxy/Makefile | 108 - external/privoxy/README | 280 - external/privoxy/acconfig.h | 495 -- external/privoxy/actionlist.h | 306 - external/privoxy/actions.c | 2021 ----- external/privoxy/actions.h | 187 - external/privoxy/amiga.c | 341 - external/privoxy/amiga.h | 176 - external/privoxy/cgi.c | 2987 ------- external/privoxy/cgi.h | 289 - external/privoxy/cgiedit.c | 4924 ----------- external/privoxy/cgiedit.h | 175 - external/privoxy/cgisimple.c | 2295 ----- external/privoxy/cgisimple.h | 185 - external/privoxy/config | 1530 ---- external/privoxy/config.guess | 1530 ---- external/privoxy/config.orig | 1530 ---- external/privoxy/config.sub | 1773 ---- external/privoxy/configure.in | 1463 --- external/privoxy/cygwin.h | 80 - external/privoxy/deanimate.c | 554 -- external/privoxy/deanimate.h | 126 - external/privoxy/default.action.master | 2162 ----- external/privoxy/default.filter | 1289 --- external/privoxy/doc/gpl.html | 560 -- external/privoxy/doc/pcrs.3 | 488 - external/privoxy/doc/source/authors.sgml | 67 - external/privoxy/doc/source/buildsource.sgml | 256 - external/privoxy/doc/source/config.sgml | 36 - external/privoxy/doc/source/contacting.sgml | 262 - external/privoxy/doc/source/copyright.sgml | 47 - external/privoxy/doc/source/developer-manual.sgml | 3304 ------- external/privoxy/doc/source/faq.sgml | 3454 -------- external/privoxy/doc/source/history.sgml | 71 - external/privoxy/doc/source/install.sgml | 106 - external/privoxy/doc/source/ldp.dsl.in | 420 - external/privoxy/doc/source/license.sgml | 50 - external/privoxy/doc/source/newfeatures.sgml | 156 - external/privoxy/doc/source/p-authors.sgml | 159 - external/privoxy/doc/source/p-config.sgml | 2756 ------ external/privoxy/doc/source/privoxy-man-page.sgml | 352 - external/privoxy/doc/source/privoxy.sgml | 44 - external/privoxy/doc/source/readme.sgml | 268 - external/privoxy/doc/source/seealso.sgml | 113 - external/privoxy/doc/source/supported.sgml | 46 - external/privoxy/doc/source/temp/manpage.refs | 4 - external/privoxy/doc/source/user-manual.sgml | 9328 -------------------- external/privoxy/doc/source/webserver/index.sgml | 372 - external/privoxy/doc/webserver/README.txt | 9 - external/privoxy/doc/webserver/announce.txt | 126 - .../doc/webserver/developer-manual/coding.html | 2602 ------ .../doc/webserver/developer-manual/contact.html | 510 -- .../doc/webserver/developer-manual/copyright.html | 298 - .../doc/webserver/developer-manual/cvs.html | 330 - .../webserver/developer-manual/documentation.html | 944 -- .../doc/webserver/developer-manual/index.html | 688 -- .../webserver/developer-manual/introduction.html | 199 - .../doc/webserver/developer-manual/newrelease.html | 1956 ---- .../doc/webserver/developer-manual/quickstart.html | 150 - .../doc/webserver/developer-manual/seealso.html | 405 - .../doc/webserver/developer-manual/testing.html | 259 - .../developer-manual/webserver-update.html | 260 - .../privoxy/doc/webserver/faq/configuration.html | 1797 ---- external/privoxy/doc/webserver/faq/contact.html | 510 -- external/privoxy/doc/webserver/faq/copyright.html | 301 - external/privoxy/doc/webserver/faq/general.html | 1076 --- external/privoxy/doc/webserver/faq/index.html | 999 --- .../privoxy/doc/webserver/faq/installation.html | 569 -- external/privoxy/doc/webserver/faq/misc.html | 1745 ---- external/privoxy/doc/webserver/faq/trouble.html | 1276 --- .../privoxy/doc/webserver/images/files-in-use.jpg | Bin 16587 -> 0 bytes .../privoxy/doc/webserver/images/proxy_setup.jpg | Bin 33275 -> 0 bytes external/privoxy/doc/webserver/index.html | 328 - .../doc/webserver/man-page/privoxy-man-page.html | 294 - external/privoxy/doc/webserver/p_doc.css | 66 - external/privoxy/doc/webserver/p_feedback.css | 9 - external/privoxy/doc/webserver/privoxy-index.html | 283 - external/privoxy/doc/webserver/privoxy.css | 69 - external/privoxy/doc/webserver/robots.txt | 17 - external/privoxy/doc/webserver/team/01stefanw.jpg | Bin 10327 -> 0 bytes .../privoxy/doc/webserver/team/01stefanw_t.jpg | Bin 1896 -> 0 bytes external/privoxy/doc/webserver/team/02jon.jpg | Bin 85888 -> 0 bytes external/privoxy/doc/webserver/team/02jon_t.jpg | Bin 2039 -> 0 bytes external/privoxy/doc/webserver/team/03andreas.jpg | Bin 42354 -> 0 bytes .../privoxy/doc/webserver/team/03andreas_t.jpg | Bin 1894 -> 0 bytes external/privoxy/doc/webserver/team/04rodney.jpg | Bin 57055 -> 0 bytes external/privoxy/doc/webserver/team/04rodney_t.jpg | Bin 2138 -> 0 bytes external/privoxy/doc/webserver/team/05david.jpg | Bin 62834 -> 0 bytes external/privoxy/doc/webserver/team/05david_t.jpg | Bin 3950 -> 0 bytes external/privoxy/doc/webserver/team/05member.jpg | Bin 932 -> 0 bytes external/privoxy/doc/webserver/team/05member_t.jpg | Bin 1049 -> 0 bytes external/privoxy/doc/webserver/team/06member.jpg | Bin 932 -> 0 bytes external/privoxy/doc/webserver/team/06member_t.jpg | Bin 1049 -> 0 bytes external/privoxy/doc/webserver/team/07member.jpg | Bin 932 -> 0 bytes external/privoxy/doc/webserver/team/07member_t.jpg | Bin 1049 -> 0 bytes external/privoxy/doc/webserver/team/08member.jpg | Bin 932 -> 0 bytes external/privoxy/doc/webserver/team/08member_t.jpg | Bin 1049 -> 0 bytes external/privoxy/doc/webserver/team/20member.jpg | Bin 932 -> 0 bytes external/privoxy/doc/webserver/team/20member_t.jpg | Bin 1049 -> 0 bytes external/privoxy/doc/webserver/team/index.html | 26 - .../doc/webserver/user-manual/actions-file.html | 8214 ----------------- .../doc/webserver/user-manual/appendix.html | 2187 ----- .../privoxy/doc/webserver/user-manual/config.html | 4121 --------- .../doc/webserver/user-manual/configuration.html | 514 -- .../privoxy/doc/webserver/user-manual/contact.html | 514 -- .../doc/webserver/user-manual/copyright.html | 424 - .../doc/webserver/user-manual/files-in-use.jpg | Bin 16587 -> 0 bytes .../doc/webserver/user-manual/filter-file.html | 1652 ---- .../privoxy/doc/webserver/user-manual/index.html | 963 -- .../doc/webserver/user-manual/installation.html | 1082 --- .../doc/webserver/user-manual/introduction.html | 292 - .../privoxy/doc/webserver/user-manual/proxy2.jpg | Bin 45431 -> 0 bytes .../doc/webserver/user-manual/proxy_setup.jpg | Bin 33275 -> 0 bytes .../doc/webserver/user-manual/quickstart.html | 943 -- .../privoxy/doc/webserver/user-manual/seealso.html | 418 - .../privoxy/doc/webserver/user-manual/startup.html | 902 -- .../doc/webserver/user-manual/templates.html | 321 - .../doc/webserver/user-manual/upgradersnote.html | 296 - .../doc/webserver/user-manual/whatsnew.html | 351 - external/privoxy/encode.c | 430 - external/privoxy/encode.h | 94 - external/privoxy/errlog.c | 1547 ---- external/privoxy/errlog.h | 215 - external/privoxy/filters.c | 2709 ------ external/privoxy/filters.h | 382 - external/privoxy/gateway.c | 1379 --- external/privoxy/gateway.h | 158 - external/privoxy/genclspec.sh | 55 - external/privoxy/icons/ico00001.ico | Bin 318 -> 0 bytes external/privoxy/icons/ico00002.ico | Bin 318 -> 0 bytes external/privoxy/icons/ico00003.ico | Bin 318 -> 0 bytes external/privoxy/icons/ico00004.ico | Bin 318 -> 0 bytes external/privoxy/icons/ico00005.ico | Bin 318 -> 0 bytes external/privoxy/icons/ico00006.ico | Bin 318 -> 0 bytes external/privoxy/icons/ico00007.ico | Bin 318 -> 0 bytes external/privoxy/icons/ico00008.ico | Bin 318 -> 0 bytes external/privoxy/icons/idle.ico | Bin 318 -> 0 bytes external/privoxy/icons/off.ico | Bin 318 -> 0 bytes external/privoxy/icons/os2.ico | Bin 2968 -> 0 bytes external/privoxy/icons/os20.ico | Bin 498 -> 0 bytes external/privoxy/icons/os21.ico | Bin 498 -> 0 bytes external/privoxy/icons/os22.ico | Bin 498 -> 0 bytes external/privoxy/icons/os23.ico | Bin 498 -> 0 bytes external/privoxy/icons/os24.ico | Bin 498 -> 0 bytes external/privoxy/icons/os25.ico | Bin 498 -> 0 bytes external/privoxy/icons/os26.ico | Bin 498 -> 0 bytes external/privoxy/icons/os27.ico | Bin 498 -> 0 bytes external/privoxy/icons/os28.ico | Bin 498 -> 0 bytes external/privoxy/icons/privoxy.ico | Bin 318 -> 0 bytes external/privoxy/install-sh | 251 - external/privoxy/jbsockets.c | 1054 --- external/privoxy/jbsockets.h | 149 - external/privoxy/jcc.c | 4486 ---------- external/privoxy/jcc.c.rej | 20 - external/privoxy/jcc.h | 261 - external/privoxy/list.c | 1229 --- external/privoxy/list.h | 181 - external/privoxy/loadcfg.c | 2041 ----- external/privoxy/loadcfg.h | 199 - external/privoxy/loaders.c | 1762 ---- external/privoxy/loaders.h | 250 - external/privoxy/match-all.action | 14 - external/privoxy/miscutil.c | 1907 ---- external/privoxy/miscutil.h | 259 - external/privoxy/mkinstalldirs | 40 - external/privoxy/parsers.c | 4740 ---------- external/privoxy/parsers.c.rej | 16 - external/privoxy/parsers.h | 323 - external/privoxy/pcre/Makefile.in | 219 - external/privoxy/pcre/RunTest.in | 148 - external/privoxy/pcre/chartables.c | 183 - external/privoxy/pcre/config.guess | 1121 --- external/privoxy/pcre/config.h | 5 - external/privoxy/pcre/config.in | 33 - external/privoxy/pcre/config.sub | 1232 --- external/privoxy/pcre/configure | 1568 ---- external/privoxy/pcre/configure.in | 85 - external/privoxy/pcre/dftables | Bin 22917 -> 0 bytes external/privoxy/pcre/dftables.c | 148 - external/privoxy/pcre/dll.mk | 60 - external/privoxy/pcre/doc/ChangeLog | 655 -- external/privoxy/pcre/doc/NON-UNIX-USE | 50 - external/privoxy/pcre/doc/Tech.Notes | 243 - external/privoxy/pcre/doc/authors | 6 - external/privoxy/pcre/doc/copying | 46 - external/privoxy/pcre/doc/news | 54 - external/privoxy/pcre/doc/pcre.3 | 1810 ---- external/privoxy/pcre/doc/pcre.html | 2397 ----- external/privoxy/pcre/doc/pcre.txt | 2125 ----- external/privoxy/pcre/doc/pcregrep.1 | 76 - external/privoxy/pcre/doc/pcregrep.html | 105 - external/privoxy/pcre/doc/pcregrep.txt | 87 - external/privoxy/pcre/doc/pcreposix.3 | 149 - external/privoxy/pcre/doc/pcreposix.html | 191 - external/privoxy/pcre/doc/pcreposix.txt | 159 - external/privoxy/pcre/doc/pcretest.txt | 246 - external/privoxy/pcre/doc/perltest.txt | 29 - external/privoxy/pcre/doc/readme | 270 - external/privoxy/pcre/get.c | 227 - external/privoxy/pcre/install | 185 - external/privoxy/pcre/install-sh | 251 - external/privoxy/pcre/internal.h | 381 - external/privoxy/pcre/licence | 46 - external/privoxy/pcre/ltconfig | 3078 ------- external/privoxy/pcre/ltmain.sh | 4012 --------- external/privoxy/pcre/maketables.c | 132 - external/privoxy/pcre/pcre-config | 59 - external/privoxy/pcre/pcre-config.in | 59 - external/privoxy/pcre/pcre.c | 5151 ----------- external/privoxy/pcre/pcre.def | 19 - external/privoxy/pcre/pcre.h | 110 - external/privoxy/pcre/pcre.in | 110 - external/privoxy/pcre/pcregrep.c | 228 - external/privoxy/pcre/pcreposix.c | 280 - external/privoxy/pcre/pcreposix.h | 88 - external/privoxy/pcre/pcretest.c | 1225 --- external/privoxy/pcre/study.c | 397 - external/privoxy/pcre/vc_dftables.dsp | 296 - external/privoxy/pcrs.c | 1317 --- external/privoxy/pcrs.h | 221 - external/privoxy/privoxy-generic.init | 182 - external/privoxy/privoxy-rh.spec | 1196 --- external/privoxy/privoxy-suse.spec | 556 -- external/privoxy/privoxy.1 | 216 - external/privoxy/privoxy.init | 276 - external/privoxy/privoxy.init.suse | 127 - external/privoxy/privoxy.logrotate | 107 - external/privoxy/project.h | 1885 ---- external/privoxy/regression-tests.action | 782 -- external/privoxy/slackware/rc.privoxy.orig | 109 - external/privoxy/ssplit.c | 218 - external/privoxy/ssplit.h | 84 - external/privoxy/strptime.h | 1003 --- external/privoxy/templates/blocked | 287 - external/privoxy/templates/cgi-error-404 | 149 - external/privoxy/templates/cgi-error-bad-param | 156 - external/privoxy/templates/cgi-error-disabled | 169 - external/privoxy/templates/cgi-error-file | 139 - .../privoxy/templates/cgi-error-file-read-only | 146 - external/privoxy/templates/cgi-error-modified | 157 - external/privoxy/templates/cgi-error-parse | 176 - external/privoxy/templates/cgi-style.css | 173 - external/privoxy/templates/connect-failed | 156 - external/privoxy/templates/default | 131 - .../privoxy/templates/edit-actions-add-url-form | 216 - external/privoxy/templates/edit-actions-for-url | 1425 --- .../privoxy/templates/edit-actions-for-url-filter | 40 - external/privoxy/templates/edit-actions-list | 412 - .../privoxy/templates/edit-actions-list-button | 49 - .../privoxy/templates/edit-actions-list-section | 125 - external/privoxy/templates/edit-actions-list-url | 95 - .../privoxy/templates/edit-actions-remove-url-form | 196 - external/privoxy/templates/edit-actions-url-form | 219 - external/privoxy/templates/forwarding-failed | 167 - external/privoxy/templates/mod-local-help | 12 - external/privoxy/templates/mod-support-and-service | 61 - external/privoxy/templates/mod-title | 4 - external/privoxy/templates/mod-unstable-warning | 7 - external/privoxy/templates/no-such-domain | 158 - external/privoxy/templates/show-request | 154 - external/privoxy/templates/show-status | 343 - external/privoxy/templates/show-status-file | 146 - external/privoxy/templates/show-url-info | 340 - external/privoxy/templates/show-version | 159 - external/privoxy/templates/toggle | 180 - external/privoxy/templates/toggle-mini | 91 - external/privoxy/templates/untrusted | 191 - external/privoxy/templates/url-info-osd.xml | 14 - external/privoxy/tools/privoxy-log-parser.pl | 2064 ----- external/privoxy/tools/privoxy-regression-test.pl | 1754 ---- external/privoxy/tools/url-pattern-translator.pl | 139 - external/privoxy/trust | 85 - external/privoxy/urlmatch.c | 1452 --- external/privoxy/urlmatch.h | 136 - external/privoxy/user.action | 169 - external/privoxy/user.filter | 75 - external/privoxy/utils/changelog2doc.pl | 66 - external/privoxy/utils/docbook2man/COPYING | 340 - .../privoxy/utils/docbook2man/docbook2man-spec.pl | 1229 --- .../utils/docbook2man/docbook2man-spec.pl.1 | 99 - external/privoxy/utils/filter2docs.pl | 81 - external/privoxy/utils/ldp_print/README | 80 - external/privoxy/utils/ldp_print/VERSION | 1 - .../privoxy/utils/ldp_print/fix_print_html.lib | 227 - external/privoxy/utils/ldp_print/ldp_print | 72 - external/privoxy/utils/prepare-configfile.pl | 50 - external/privoxy/vc_config_pthreads.h | 484 - external/privoxy/vc_config_winthreads.h | 675 -- external/privoxy/vc_console.dsp | 405 - external/privoxy/vc_privoxy.dsp | 488 - external/privoxy/vc_privoxy.dsw | 59 - external/privoxy/w32.rc | 343 - external/privoxy/w32log.c | 1480 ---- external/privoxy/w32log.h | 181 - external/privoxy/w32res.h | 194 - external/privoxy/w32svrapi.c | 952 -- external/privoxy/w32svrapi.h | 146 - external/privoxy/w32taskbar.c | 313 - external/privoxy/w32taskbar.h | 82 - external/privoxy/win32.c | 366 - external/privoxy/win32.h | 94 - 306 files changed, 0 insertions(+), 179609 deletions(-) diff --git a/external/privoxy/AUTHORS b/external/privoxy/AUTHORS deleted file mode 100644 index 3f8a609..0000000 --- a/external/privoxy/AUTHORS +++ /dev/null @@ -1,116 +0,0 @@ - Authors of Privoxy v2.9.x and 3.x -=========================================================================== - -Current Privoxy Team: - - Fabian Keil, lead developer - David Schmidt, developer - - Hal Burgiss - Mark Miller - Gerry Murphy - Lee Rian - Roland Rosenfeld - Jörg Strohmayer - -Former Privoxy Team Members: - - Johny Agotnes - Rodrigo Barbosa - Moritz Barsnick - Ian Cummings - Brian Dessent - Jon Foster - Karsten Hopp - Alexander Lazic - Daniel Leite - Gábor Lipták - Adam Lock - Guy Laroche - Justin McMurtry - Andreas Oesterhelt - Haroon Rafique - Georg Sauthoff - Thomas Steudten - Rodney Stromlund - Sviatoslav Sviridov - Sarantis Paskalis - Stefan Waldherr - -Thanks to the many people who have tested Privoxy, reported bugs, provided -patches, made suggestions or contributed in some way. These include (in -alphabetical order): - - Ken Arromdee - Devin Bayer - Gergely Bor - Reiner Buehl - Andrew J. Caines - Clifford Caoile - Frédéric Crozat - Michael T. Davis - Mattes Dolak - Matthias Drochner - Peter E. - Florian Effenberger - Markus Elfring - Dean Gaudet - Stephen Gildea - Daniel Griscom - Felix Gröbert - Aaron Hamid - Darel Henman - Magnus Holmgren - Eric M. Hopper - Ralf Horstmann - Stefan Huehner - Peter Hyman - Derek Jennings - Petr Kadlec - David Laight - Bert van Leeuwen - Don Libes - Paul Lieverse - Toby Lyward - Wil Mahan - Jindrich Makovicka - David Mediavilla - Raphael Moll - Amuro Namie - Adam Piggott - Dan Price - Roberto Ragusa - Félix Rauch - Maynard Riley - Chung-chieh Shan - Spinor S. - Bart Schelstraete - Oliver Stoeneberg - Peter Thoenen - Martin Thomas - Bobby G. Vinyard - Jochen Voss - Glenn Washburn - Song Weijia - Jörg Weinmann - Darren Wiebe - Anduin Withers - Oliver Yeoh - Jamie Zawinski - -Privoxy is based in part on code originally developed by Junkbusters Corp. and -Anonymous Coders. - -Privoxy heavily relies on Philip Hazel's PCRE. - -The code to filter compressed content makes use of zlib which is written by -Jean-loup Gailly and Mark Adler. - -On systems that lack snprintf(), Privoxy is using a version written by Mark -Martinec. On systems that lack strptime(), Privoxy is using the one from the -GNU C Library written by Ulrich Drepper. - -If we've missed you off this list, please let us know! - - Privoxy team. http://www.privoxy.org/ - <ijbswa-developers(a)lists.sourceforge.net> diff --git a/external/privoxy/ChangeLog b/external/privoxy/ChangeLog deleted file mode 100644 index 54cc625..0000000 --- a/external/privoxy/ChangeLog +++ /dev/null @@ -1,717 +0,0 @@ --------------------------------------------------------------------- -ChangeLog for Privoxy --------------------------------------------------------------------- -*** Version 3.0.12 (UNRELEASED) *** - -- The socket-timeout option now also works on platforms whose - select() implementation modifies the timeout structure. - Previously the timeout was triggered even if the connection - didn't stall. Reported by cyberpatrol. -- The Connection: keep-alive code properly deals with files - larger than 2GB. Previously the connection was closed too - early. -- The content length for files above 2GB is logged correctly. -- The user-manual directive on the show-status page links to - the documentation location specified with the directive, - not to the Privoxy website. -- When running in daemon mode, Privoxy doesn't log anything - to the console unless there are errors before the logfile - has been opened. -- The show-status page prints warnings about invalid directives - on the same line as the directives themselves. -- Fixed several justified (but harmless) compiler warnings, - mostly on 64 bit platforms. -- The mingw32 version explicitly requests the default charset - to prevent display problems with some fonts available on more - recent Windows versions. Patch by Burberry. -- The mingw32 version uses the Privoxy icon in the alt-tab - windows. Patch by Burberry. -- The timestamp and the thread id is omitted in the "Fatal error" - message box on mingw32. -- Fixed two related mingw32-only buffer overflows. Triggering - them required control over the configuration file, therefore - this isn't seen as a security issue. -- In verbose mode, or if the new option --show-skipped-tests - is used, Privoxy-Regression-Test logs skipped tests and the - skip reason. - -*** Version 3.0.11 *** - -- On most platforms, outgoing connections can be kept alive and - reused if the server supports it. Whether or not this improves - things depends on the connection. -- When dropping privileges, membership in supplementary groups - is given up as well. Not doing that can lead to Privoxy running - with more rights than necessary and violates the principle of - least privilege. Users of the --user option are advised to update. - Thanks to Matthias Drochner for reporting the problem, - providing the initial patch and testing the final version. -- Passing invalid users or groups with the --user option - didn't lead to program exit. Regression introduced in 3.0.7. -- The match all section has been moved from default.action - to a new file called match-all.action. As a result the - default.action no longer needs to be touched by the user - and can be safely overwritten by updates. -- The standard.action file has been removed. Its content - is now part of the default.action file. -- In some situations the logged content length was slightly too low. -- Crunched requests are logged with their own log level. - If you used "debug 1" in the past, you'll probably want - to additionally enable "debug 1024", otherwise only passed - requests will be logged. If you only care about crunched - requests, simply replace "debug 1" with "debug 1024". -- The crunch reason has been moved to the beginning of the - crunch message. For HTTP URLs, the protocol is logged as well. -- Log messages are shortened by printing the thread id on its - own (as opposed to putting it inside the string "Privoxy()"). -- The config option socket-timeout has been added to control - the time Privoxy waits for data to arrive on a socket. -- Support for remote toggling is controlled by the configure - option --disable-toggle only. In previous versions it also - depended on the action editor and thus configuring with the - --disable-editor option would disable remote toggling support - as well. -- Requests with invalid HTTP versions are rejected. -- The template symbol @date@ can be used to include a date(1)-like - time string. Initial patch submitted by Endre Szabo. -- Responses from shoutcast servers are accepted again. - Problem reported and fix suggested by Stefan. -- The hide-forwarded-for-headers action has been replaced with - the change-x-forwarded-for{} action which can also be used to - add X-Forwarded-For headers. The latter functionality already - existed in Privoxy versions prior to 3.0.7 but has been removed - as it was often used unintentionally (by not using the - hide-forwarded-for-headers action). -- A "clear log" view option was added to the mingw32 version - to clear out all of the lines in the Privoxy log window. - Based on a patch submitted by T Ford. -- The mingw32 version uses "critical sections" now, which prevents - log message corruption under load. As a side effect, the - "no thread-safe PRNG" warning could be removed as well. -- The mingw32 version's task bar icon is crossed out and - the color changed to gray if Privoxy is toggled off. - -*** Version 3.0.10 *** - -- Ordinary configuration file changes no longer cause program - termination on OS/2 if the name of the logfile hasn't been - changed as well. This regression probably crept in with the - logging improvements in 3.0.7. Reported by Maynard. -- The img-reorder filter is less likely to mess up JavaScript code in - img tags. Problem and solution reported by Glenn Washburn in #2014552. -- The source tar ball now includes Privoxy-Log-Parser, - a syntax-highlighter for Privoxy logs. For fancy screenshots see: - http://www.fabiankeil.de/sourcecode/privoxy-log-parser/ - Documentation is available through perldoc(1). - -*** Version 3.0.9 Beta *** - -- Added SOCKS5 support (with address resolution done by - the SOCKS5 server). Patch provided by Eric M. Hopper. -- The "blocked" CGI pages include a block reason that was - provided as argument to the last-applying block action. -- If enable-edit-actions is disabled (the default since 3.0.7 beta) - the show-status page hides the edit buttons and explains why. - Previously the user would get the "this feature has been disabled" - message after using the edit button. -- Forbidden CONNECT requests are treated like blocks by default. - The now-pointless treat-forbidden-connects-like-blocks action - has been removed. -- Not enabling limit-connect now allows CONNECT requests to all ports. - In previous versions it would only allow CONNECT requests to port 443. - Use +limit-connect{443} if you think you need the old default behaviour. -- The CGI editor gets turned off after three edit requests with invalid - file modification timestamps. This makes life harder for attackers - who can leverage browser bugs to send fake Referers and intend to - brute-force edit URLs. -- Action settings for multiple patterns in the same section are - shared in memory. As a result these sections take up less space - (and are loaded slightly faster). Problem reported by Franz Schwartau. -- Linear white space in HTTP headers will be normalized to single - spaces before parsing the header's content, headers split across - multiple lines get merged first. This should prevent problems like: - * letting the session-cookies-only action slip - some Cookies through unmodified, - * only suppressing the first line of a header, - thus creating an invalid one, and - * to incorrectly block headers with valid timestamps - that weren't properly recognized. - Headers that could trigger these problems are unlikely to appear - in "normal" web traffic, but could be intentionally generated to - fool some of Privoxy's header parsers. -- Host information is gathered outside the main thread so it's less - likely to delay other incoming connections if the host is misconfigured. -- New config option "hostname" to use a hostname other than - the one returned by the operating system. Useful to speed-up responses - for CGI requests on misconfigured systems. Requested by Max Khon. -- The CGI editor supports the "disable all filters of this type" - directives "-client-header-filter", "-server-header-filter", - "-client-header-tagger" and "-server-header-tagger". -- Fixed false-positives with the link-by-url filter and URLs that - contain the pattern "/jump/". -- The less-download-windows filter no longer messes - "Content-Type: application/x-shockwave-flash" headers up. -- In the show-url-info page's "Final results" section active and - inactive actions are listed separately. Patch provided by Lee. -- The GNUmakefile supports the DESTDIR variable. Patch for - the install target submitted by Radoslaw Zielinski. -- Embedding the content of configuration files in the show-status - page is significantly faster now. For a largish action file (1 MB) - a speedup of about 2450 times has been measured. This is mostly - interesting if you are using large action files or regularly use - Privoxy-Regression-Test while running Privoxy through Valgrind, - for stock configuration files it doesn't really matter. -- If zlib support is unavailable and there are content - filters active but the prevent-compression action is disabled, - the show-url-info page includes a warning that compression - might prevent filtering. -- The show-url-info page provides an OpenSearch Description that - allows to access the page through browser search plugins. -- Custom client-header filters that rewrite the request line - incorrectly no longer cause Privoxy to crash. Reported by din_a4. -- The obsolete kill-popups action has been removed as the - PCRS-based popup filters can do the same and are slightly - less unreliable. -- The inspect-jpegs action has been removed. -- The send-wafer and send-vanilla-wafer actions have been removed. - They weren't particular useful and their behaviour could be emulated - with add-header anyway. -- Privoxy-Regression-Test has been significantly improved. -- Most sections in the default.action file contain tests for - Privoxy-Regression-Test to verify that they are working as intended. -- Parts of Privoxy have been refactored to increase maintainability. -- Building with zlib (if available) is done by default. - -*** Version 3.0.8 *** - -- Fixed a small memory leak when listen-address only specifies the port. -- The source tar balls now include Privoxy-Regression-Test which - (upon other things) can be used to automatically detect some - packaging problems. Packagers are welcome to give it a try. -- Reverted a change in 3.0.7 that caused path patterns to be checked - even if the host pattern match already failed. While this doesn't - noticeable affect the performance, it makes it less likely to run - out of stack space with overly-complex path patterns the user might - have added. -- Updated the msn, yahoo and google filters to work as advertised again. -- The warning message shown by the show-status CGI page is easier to - understand. Previously it wasn't clear that the error message - is shown below the invalid directive. (Reported by Lee) -- When regenerating Content-Disposition headers the more common - spelling is used for the name. Previously it was written without caps. -- Less confusing log message if the content type isn't overwritten - because force-text-type wasn't used but the old type doesn't look - like content that would be filtered normally. -- Better log messages if the user tries to execute filters that - don't exist. -- Treat the non-standard Request-Range headers like standard range - headers and suppress them if content filtering is enabled. -- Prevent the log messages for CONNECT requests to unacceptable - ports from printing the limit-connect argument as [null] if - limit-connect hasn't been explicitly enabled. -- Don't disable the mingw32 log window if the logfile directive - isn't used. While it was an intentional change in 3.0.7 at least - one user perceived it as a regression and the same effect can - be achieved by disabling all debug directives. -- Fixed two minor problems related to the win32 build process: a css - file was not being in the installer and the trustfile comment in the - config.txt referenced a nonexisting file -- Minor documentation fixes. - -*** Version 3.0.7 Beta *** - -- Added zlib support to filter content with gzip and deflate - encoding. (Patch provided by Wil Mahan) -- Dedicated filters and actions are used for header filtering. - "filter-client-headers" and "filter-client-headers" are no longer - supported, use server-header-filter{} and client-header-filter{} - instead. -- Tags can be used to change actions based on HTTP headers. -- New server-header filter: less-download-windows. -- New client-header taggers: css-requests, image-requests, - client-ip-address, http-method, allow-post, complete-url, - user-agent and privoxy-control. -- New server-header taggers: content-type and privoxy-control. -- The forward-override{} action allows to change the forwarding - settings through the action files, for example based on client - headers like the User-Agent, or the request origin. -- Socks errors are no longer handled by the CGI page for - DNS resolution failures. -- CGI pages use favicons to signal whether they are error - or control pages. This is useful if you rely heavily on - browser tabs. -- The show-url-info CGI page shows the forwarding settings. -- "Crunch!" log messages (used when Privoxy answers requests - by itself) now also contain the reason. -- Allow to rewrite the request destination behind the client's back. -- Fix socks requests on big-endian platforms. Patch provided by Song Weijia. -- Fixes possible deadlocks and crashes on OpenBSD. - Patch provided by Ralf Horstmann. -- The CGI action editor allows to edit actionfiles with previously - forbidden characters like dots. -- New trust entries are saved with a comment that contains the - trusted referring URL (Suggested by Daniel Griscom). -- Filter descriptions are HTML encoded automatically. -- New config option "split-large-forms" to work - around a browser bug that caused IE6 and IE7 to ignore - the Submit button on the edit-actions-for-url CGI page. -- New config option "allow-cgi-request-crunching" to allow - requests for Privoxy's CGI pages to be blocked, redirected - or (un)trusted like ordinary requests. -- Empty filter files no longer interrupt the filtering process - prematurely and are correctly listed on the show-status CGI page. -- New config option "accept-intercepted-requests" to combine - Privoxy with any packet filter to build an intercepting proxy - for HTTP/1.1 requests (and for HTTP/1.0 requests with Host header set). -- fast-redirects{} catch redirects to https URLs as well. -- redirect{s@foo@bar@} can be used to redirect to a rewritten - version of the original URL. -- Trap unsupported gopher proxy requests. -- Fixed a bug in the User Manual delivery on Windows - (mingw32 only). Images now show up correctly and HTML - pages are no longer padded with garbage data. -- Fixed several minor memory leaks, most of them discovered with Valgrind. -- Only unlink the pidfile if it's actually used. -- Retries after connection problems with forced requests - aren't blocked again. -- On Unix SIGABRT causes a core dump as expected and is no - longer treated as normal shutdown signal. -- The "access denied" CGI page is more descriptive and - allows retries to circumvent the referrer check. -- Updated PCRS to handle unexpected PCRE errors properly. - Fixed crashes that could occur if Privoxy was build - with external PCRE versions newer than Privoxy's internal - one. (Reported by Chung-chieh Shan) -- Fixed crashes with null bytes in PCRS replacement strings - (Patch provided by Felix Gröbert). -- Fixed crashes with header time randomization on mingw32. -- The CGI style sheet is no longer delivered if the referring - page isn't a Privoxy CGI page. This prevents a JavaScript-based - Privoxy detection "attack". Note that detecting Privoxy is - still possible through other ways and Privoxy was never intended - to be invisible anyway. -- Added support for AmigaOS 4, fixed build for AmigaOS 3.x. -- The show-url-info CGI page displays a warning if Privoxy - is currently toggled off. -- The show-status CGI page suppresses the edit button - for action files if Privoxy has no write access. -- Most CGI error pages react properly to HEAD requests. -- Requests with RFC 3253 HTTP methods (used by Subversion) - are accepted. (Patch provided by Petr Kadlec) -- New config option "templdir" to change the location - of the CGI templates to make sure customized templates - aren't "updated". -- Better handling of "HTTP/1.1 100 Continue" responses. -- The background of the PNG pattern is transparent. -- Fixed XML syntax errors caused by banners-by-size and banners-by-url. -- Fixed crashes and possible action file corruptions - when lines containing hashes are written through the CGI editor. -- Supports dynamic filters which can contain variables. -- Supports tags to change the actions based on client or server headers. -- Incorrect actions are logged before program termination. -- The "actionsfile" syntax in the configuration file is consistent - with the rest of the configuration options and requires the - whole file name. This is an incompatible change, if you use - an old configuration file you might have to append ".action" - to your "actionsfile" directives. -- With the configuration file option "enforce-blocks" the - "go there anyway" mechanism can be disabled without recompiling - Privoxy. -- More precise error messages in case of incorrect acl syntax. -- Logs a warning if filtering is enabled but impossible due - to lack of zlib support or use of the prevent-compression action. -- Less noisy handling of Cookie:" and "Connection:" headers. -- Improved error messages in case of connection problems. -- Fix a command-line-parsing bug that was introduced before 3.0.5 - beta and caused Privoxy to treat the last argument as configuration - file if no configuration file was specified. -- Treat unknown command line options as fatal errors instead - of silently ignoring them. -- Use string functions with length checks more often. -- Don't log CONNECT requests twice. -- Allow to log the source address for ACL-related connection drops. -- Don't ignore applying filters if the server didn't - specify a Content-Type. Bug reported by Amuro Namie. -- Rejected CONNECT requests are logged with log level info - (enabled by default) and the reason for the block. -- New command line option "--pre-chroot-nslookup hostname" to - intialize the resolver library before chroot'ing. On some systems this - reduces the number of files that must be copied into the chroot tree. - (Patch provided by Stephen Gildea) -- Fix a long-standing memory corruption bug that could cause - Privoxy to overwrite a single byte in memory it didn't explicitly - allocate (but that probably was allocated anyway due to bucket size). -- Send template-based CGI pages as HTTP/1.1 unless the client - asked for HTTP/1.0. -- Let the first line in connection established responses - end in \r\n as required by RFC1945. Reported by Bert van Leeuwen. -- If no log file has been specified, disable logging instead of logging - to stderr. -- Don't block stderr when in daemon mode. -- Ignore missing zero-chunks when filtering chunk-encoded content. - Earlier Privoxy versions would buffer and then forward the content - unmodified which caused some browsers to simply show empty pages. -- Fix double free in cgi_edit_actions_list(). Reported by Venustech AD-LAB. -- The code to add X-Forwarded-For headers when the hide-forwarded-for-headers - action isn't being used has been removed. -- Fixed trustfile feature which previously didn't work without FEATURE_TOGGLE. - Reported by Lee. -- Minor code clean-ups, filter and action file updates. - (Some of them reported by Davide Alberani, Markus Elfring, - Stefan Huehner and Adam Piggott) - -*** Version 3.0.6 *** - -- New content filters: no-ping, google, msn, yahoo and blogspot. -- New header filters: x-httpd-php-to-html, html-to-xml, xml-to-html - and hide-tor-exit-notation. -- The special header "X-Filter: No" now disables header filtering as well. -- Improved the filters img-reorder, js-annoyances, webbugs, - banners-by-size, banners-by-link and ie-exploits to make them - less likely to break anything. -- Removed outdated URL patterns in default.action and added new ones. -- Added redirection from http://p.p/user-manual to http://p.p/user-manual/ -- Changed webinterface default values for hide-user-agent, hide-referrer - and set-image-blocker. - -*** Version 3.0.5 Beta *** - -- Windows version can be installed/started as a service. -- Windows icon stays blue when Privoxy is idle, green when busy. -- Integrated Fabian Keil's extensive patch. See: - http://www.fabiankeil.de/sourcecode/privoxy/. Includes the - following new or significantly improved actions (among many - other improvements): - - content-type-overwrite{} - crunch-client-header{string} - crunch-if-none-match - crunch-server-header{string} - fast-redirects{check-decoded-url} - filter-client-headers - filter-server-headers - force-text-mode - handle-as-empty-document - hide-accept-language{} - hide-content-disposition{} - hide-if-modified-since - hide-referrer{conditional-block} - overwrite-last-modified{} - redirect{URL} - treat-forbidden-connects-like-blocks - -- Standard-compliant clients are prevented from displaying cached - copies of Privoxy's error messages after the cause of the problem - has gone. -- Improved DNS error handling. -- Multiple filter files can now be specified in config. -- Added jpeg filtering to defend against MS jpeg vulnerability MS04-028 - with the new inspect-jpegs action. -- Removed the "arbitrary" 1000 filter limit - addresses tracker #911950 -- Thanks to Jindrich Makovicka for a race condition fix for the log - file. The race condition remains for non-pthread implementations. - Reference patch #1175720. Various other logging enhancements. -- A pile of assorted bug fixes, memory leaks, enhancements, etc. -- Moved Actions file reporting mechanism to SF tracker. -- Two new options for config: enable-remote-http-toggle and - forwarded-connect-retries. -- Trap unsupported FTP requests. -- Let text/xml be filtered. -- Numerous updates to default.action -- Increase the compiled in limit of trusted referrers from 64 to 512 - (for trustfile users). - -*** Version 3.0.3 *** - -- Fixed yet another two memory leaks. Process growth seems stopped now. -- Further tightened security against malicious toggle-off links. -- Excluded text/plain MIME types from filtering. This fixes a - couple of client-crashing, download corruption and - Privoxy performance issues, whose root cause lies in - web servers labelling content of unknown type as text/plain. -- Assorted fixes for POSIX compliance, signal handling, graceful - termination, compiler warnings, OSX support, Win32 systray, - error logging, hostname wildcards, correct detection of NetBSD. -- Workarounds for client (iTunes etc) and server (PHP < 4.2.3) bugs - including the notorious "blank page" problem. -- Various filter improvements; most notably the unsolicited-popups - filter became less destructive -- Major revamp of the actions file - -*** Version 3.0.2 *** - -- Fixed two memory leaks, one serious -- Fixed bug in pcrs which could cause crashes with user-defined filters -- Fixed bug in domain name matching -- Assorted small fixes (Win32 menu, CGI URL editor, ..) -- Added basic support for the OPTIONS and TRACE http methods -- Added workaround for Bug in Mac OSX that made Privoxy crash occasionally -- Refined the default action file through >400 items of user feedback -- Filter changes: - - Assorted refinements, optimizations and fixes in the js-annoyances, - img-reorder, banners-by-size, banners-by-link, webbugs, refresh-tags, - html-annoyances, content-cookies and fun filters - - Replaced filter "popups" by choice between two modes: - - "unsolicited-popups" tries to catch only the unsolicited ones - - "all-popups" tries to kill them all (as before) - - New filter "tiny-textforms" Help those tiny or hard-wrap textareas. - - New filter "jumping-windows" that prevents windows from resizing - and moving themselves - - New filter "demoronizer" which fixes MS's abuse of std charsets - (common cases anyway). - - Replaced "nimda" with more general "ie-exploits" filter in which - all filters for exploits shall be collected -- Improved cookie logging -- Rewrote make install target. Added uninstall and install-strip - targets. -- Fixed a potential (application-level, NOT OS-level!) security - problem involving remote toggling and action file manipulation - by mailicious websites. -- Added ability to chroot (thanks to Sviatoslav Sviridov) -- Added more action aliases for prehistoric action names -- Add Slackware support to Makefile. - -*** Version 3.0 *** - -- Fixed Windows startmenu items, log window and tray icon menus. -- Added warning for bogus install target -- Added quicktime-kioskmode filter and improved frameset-borders -- Updated default.action based on latest feedback -- New PDF doc build process -- Add a user contrib module to cvs: - http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/contrib/ - -*** Version 2.9.18 *** - -- Added workaround for IE bug that broke CGI interface -- Bugfix: String actions now reliably editable through CGI interface -- Three filters fixed (again!) -- Assorted small fixes and doc enhancements - -*** Version 2.9.16 *** - -- Major revamp of default.action to get rid of years of cruft. -- Same for default.filter -- Re-design and major improvements to the CGI editor interface. -- Address spurious 'out of memory' error due to incorrect file permissions. -- Impose buffer limits while reading client and server headers. -- Better memory and CPU optimization. -- Add Conectiva Linux package. -- user-manual directive added to config for help links from within CGI - editor. -- Multiple actions files can now be specified in config. -- Actions files are changed to: default.action, standard.action, and - user.action. user.action is for personal/local configuration. -- The usual many small and miscellaneous bug and security fixes. - -*** Version 2.9.14 Beta *** - -- Fix Solaris compile problem (gateway.h and filters.h) -- Makefile fixes for Solaris, FreeBSD (?) -- Fix build failure where certain features were disabled. -- 'blocked-compact' template is removed. Various CGI improvements, - including an adaptive 'blocked' template. -- Various tweaks for actions file to get ready for stable 3.0 -- Included a 'Bookmarklet' and PHP scripts for reporting actions file - problems via web interface at privoxy.org. Accessed via internal CGIs. -- Include cgi-style.css for templates. -- #include mechansim for common text in templates -- Various other minor fixes. - -*** Version 2.9.13 Beta *** - -- *NEWS*: The project has been renamed to Privoxy! The new name is - reflected throughout (file locations, etc). -- ijb.action is now default.action. re_filterfile is now - default.filter. -- http://i.j.b/ is now http://p.p/ -- The 'logo' option for replacing ad iamges is removed now. 'Pattern' - (checkerboard) is now the default. -- RPM spec file make over. - - -*** Version 2.9.12 Beta *** - -- **READ**: The default listening PORT is NOW 8118!!! Changed from - 8000 due to conflict with NAS (Network Audio Server, whatever that - is.) -- More CGI actions editor fixes and improvements. -- Win32 command line fix ups. -- re_filterfile now has modular sections that can be activated on a - per site basis. Some new goodies there too. -- +filter now takes arguments to match FILTER sections in re_filterfile - for even more flexibility. -- Added a new image blocker option: +image-blocker{pattern}, which - displays a checkerboard patthern and scales better than the logo. -- PNG images will be used in place of GIF for JB built-in images - if configured with --enable-no-gif. -- Clean up compiler warnings (mostly). -- Improved handling of failed DNS lookups & diagnostics for failed bind - to listen socket -- Made --no-daemon mode log to tty instead of logfile. -- Various spec file and init script cleanups and improvements (Redhat and - SuSE). -- CGI Editor works on OS/2 now. -- Fix restart failure where sockets were in TIME_WAIT. -- Fixes for actions cgi editor, make sure we have right file. -- A --pidfile command line option now, in addition to --help, - --version, --no-daemon, --user and configfile. --no-daemon replaces - the former -d option and _DEBUG define. --user will drop privileges - to the specified user. -- Signal handling cleanups (*nix). -- CGI actions editor improvements and fixes. -- Error handling improvements, especially out of memory. -- Default re_filterfile fix that caused spurious IJB logos - (instead of 'blank'). -- configure.in threading fixes for Solaris. -- Various other minor fixes. - - -*** Version 2.9.11 Beta Changes *** - -- Add "session" cookie concept where cookies exist for the life -of that browser session only (ie never goes to disk). -- Checks for correct header length. -- Fix user:pass@host.domain.com auth bug. -- Better signal handling on *nix. -- Fix CFLAGS hard-coded in configure.in -- Fix threading bug re: gethostbyname() that caused random -URLs to fail in some cases. - - -*** Version 2.9.11 Alpha Changes *** - -- A web-based editor for the actions file is included (go to http://i.j.b/) -- Web-based toggle IJB on/off support. -- Cookie handling has changed - the new +no-cookies-keep feature is now the -default. -- actionsfile is renamed to ijb.action. -- junkbstr.txt is now config.txt on Win32. -- Support for running IJB as a UNIX daemon process has improved. -- Unix daemon now returns error code on failed start. -- Timestamps in logfile and jarfile now. -- Fix for the Netscape bug reintroduced in 2.9.9. -- make should now abort if gmake (GNU make) not present. -- Many other minor bugfixes -- Start a ChangeLog :) - - - -*** Version 2.9.3 pre-Alpha Changes *** - -- Amiga support (completely untested by me - I don't have an Amiga) -- "tinygif 3" support (redirects blocked images to a specified URL, so -the browser doesn't have to load and cache many copies of the same -image). -- one case where there were both local and global "referrer" variables -(yuck!) clarified by renaming the local one to "refer". -- Fixed some places where close() was used instead of close_socket(). -Thanks to Jörg Strohmayer (joergs at users.sourceforge.net) for these. -- Temporary hack to get FORCE_LOAD to work with IE. I just lowercased the -FORCE_LOAD_PREFIX. Needs fixing properly. -- Most URLs hardcoded into Junkbuster were changed to go through a script -e.g. http://ijbswa.sourceforge.net/redirect.php?v=2.9.3&to=faq -The only other URLs left are the GNU GPL: - http://www.fsf.org/copyleft/gpl.html -and the home page: - http://ijbswa.sourceforge.net/ -... and various URLs which will be intercepted by Junkbuster anyway. -TODO: Still need to do something with the URLs in Junkbuster Corp's -copyright/trademark notice on the bottom of the show-proxy-args page. -- PCRE or GNU Regex is now a #define option. - - -*** Version 2.9.2 pre-Alpha Changes *** - -- Andreas applied the latest version of the FORCE patch. - - -*** Version 2.9.1 pre-Alpha Changes *** - -- in parsers.c, fixed two #ifdef FORCE to #ifdef FORCE_LOAD -(BTW: I think FORCE is precise enough, since loading remote -data is the whole purpose of a proxy..) -- Set the FORCE_PREFIX (back) to 'IJB-FORCE-LOAD-'. While 'noijb.' -is more elegant and looks like a hostname in the URL, it doesn't -make clear to the inexperienced user that the proxy is bypassed. It -also has a higher name collision risk. -- Filled in the function header templates for my functions in -parsers.c (again). They obviously got lost in our current -patch war ;-) -- Cut the credit for the §-referrer-option from the config file, -that Stefan had placed there. -- Improved the re_filterfile - - -*** Version 2.9.0 pre-Alpha Changes *** - -- Now use PCRE, not GNU REGEX. I have not yet had chance to check the -syntax of the block/image/cookie file to ensure that they match what -is expected - however they seem to work. -- Replaced "configure" script with one generated by "autoconf". Also -use a header "config.h" (was ijbconfig.h in my previous release) for -the #defines. "config.h" is now generated with "autoheader" from -"acconfig.h" and "configure.in". (Note that to install you do not -need autoconf or autoheader - just run "./configure".) -To see command-line options, run "./configure --help". -This is my first ever autoconf script, so it has some rough edges -(how PCRE is handled is the roughest). -- Error logging code replaced with new module errlog.c, based on the -one from JunkbusterMT (but with the threading code removed). -- Most of Rodney's 0.21 and 0.21A patches applied. (Marked *). I did not -apply all of these, since I had already independently done conditional -popup file, conditional image file, and integration of popup code. -- ACL, Jar and trust files conditionally compiled. -- New source file headers. -- Various cosmetic changes. (But I have not consistently ordered the -config files - I think that's worthwhile, but it's 1am and I want to -get this released!) -- RCS tags on .h files. -- RCS tags are const char[] rather than const char *. (Saves 4 bytes -per tag ;-) -- VC++ project files renamed to vc_junkbuster.*. -- show-proxy-args now shows status of all conditionals, not just REGEX -- Various functions moved around. Most notably all the system-specific -sockets code which was spread between jcc.c, bind.c, and connect.c, -has been moved to "jbsockets.c". The non-system-specific code from -connect.c and socks4.c has been movet to "gateway.c". Also, the -config file loader and the global variables it writes to have been -moved to "loadcfg.c". (Maybe this should go into loaders.c?) -And candidate for the "worst filename ever" award is "miscutil.c", -which contains, well, miscellaneous utility functions like zalloc. -(Suggestions for a better name for this file are welcome!) -- Loaders now use a common function to read a line and skip comments, -and this function also stores the proxy_args. -- Added ./junkbuster --help (Not for Win32 GUI) -- Added ./junkbuster --version (Not for Win32 GUI) -- Win32 resources are now all marked as "U.S. English", rather than -being a mix of "U.S. English", "U.K. English" and "Irish English". -- Version number changes to 2.9.0 - - - ----------------------------------------------------------------------- -Copyright : Written by and Copyright (C) 2001-2008 the SourceForge - Privoxy team. http://www.privoxy.org/ - - Based on the Internet Junkbuster originally written - by and Copyright (C) 1997 Anonymous Coders and - Junkbusters Corporation. http://www.junkbusters.com/ - - This program is free software; you can redistribute it - and/or modify it under the terms of the GNU General - Public License as published by the Free Software - Foundation; either version 2 of the License, or (at - your option) any later version. - - This program is distributed in the hope that it will - be useful, but WITHOUT ANY WARRANTY; without even the - implied warranty of MERCHANTABILITY or FITNESS FOR A - PARTICULAR PURPOSE. See the GNU General Public - License for more details. - - The GNU General Public License should be included with - this file. If not, you can view it at - http://www.gnu.org/copyleft/gpl.html - or write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. diff --git a/external/privoxy/GNUmakefile.in b/external/privoxy/GNUmakefile.in deleted file mode 100644 index 481633c..0000000 --- a/external/privoxy/GNUmakefile.in +++ /dev/null @@ -1,2156 +0,0 @@ -# Note: Makefile is built automatically from Makefile.in -# -# $Id: GNUmakefile.in,v 1.180 2009/02/28 08:28:14 fabiankeil Exp $ -# -# Written by and Copyright (C) 2001 - 2008 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# - -############################################################################# -# Set make command correctly -############################################################################# -@SET_MAKE@ - -############################################################################# -# Version number (for RPM) -############################################################################# - -VERSION_MAJOR = @VERSION_MAJOR@ -VERSION_MINOR = @VERSION_MINOR@ -VERSION_POINT = @VERSION_POINT@ -CODE_STATUS = @CODE_STATUS@ -VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) -RPM_VERSION = $(VERSION) -RPM_PACKAGEV = "" -SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d") - - -############################################################################# -# "make install" directories and variables -############################################################################# - -#User Group paras -USER = @USER@ -GROUP = @GROUP@ - -datarootdir = @datarootdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ -CONF_BASE = @sysconfdir@ -SBIN_DEST = @sbindir@ -MAN_DIR = @mandir@ -MAN_DEST = $(MAN_DIR)/man1 -SHARE_DEST = @datadir@ -DOC_DEST = $(SHARE_DEST)/doc/privoxy -VAR_DEST = @localstatedir@ -LOGS_DEST = $(VAR_DEST)/log/privoxy -PIDS_DEST = $(VAR_DEST)/run - -# if $prefix = /usr/local then the default CONFDEST change from -# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy -# by the target rule CONF_DEST -# -# also if the $prefix is /usr/local and there is no -# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there -# instead in this situation -# -# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it -# changes this to /var for storing the logs and pidfile - -# used in source dir only, the install goes to $share_dest/doc/privoxy -DOK_WEB = doc/webserver/ - -# Install usage should be compatible with install-sh. -INSTALL = @INSTALL@ -# Binaries -BIN_MODE = 0755 -# Support files, docs, etc. -RA_MODE = 0664 -# Directory -DIR_MODE = 0755 -# Files daemon writes to. -RWD_MODE = 0660 -INSTALL_P = -m $(BIN_MODE) -INSTALL_T = -m $(RA_MODE) -INSTALL_D = -m $(DIR_MODE) -d -INSTALL_R = -m $(RWD_MODE) - -# install options for superuser install -#INSTALL_S = -g @GROUP@ -o @USER@ - -############################################################################# -# Build tools -############################################################################# - -PROGRAM = privoxy@EXEEXT@ -CC = @CC@ -ECHO = echo -GZIP_PROG = gzip - -# id -u is not universal. FIXME: need to set from configure. Breaks on -# Solaris. -#ID = id -u -ID = id -LD = @CC@ -RM = rm -f -CP = cp -f -RMDIR = rmdir -MKDIR = ./mkinstalldirs -STRIP_PROG = strip -SED = sed -GREP = grep -CAT = cat -RPM = rpm -RPMBUILD = rpmbuild -MV = mv -TAR = tar -LN = ln -TOUCH = touch -KILL = kill -CHMOD = chmod -CHOWN = chown -CHGRP = chgrp -GROUPS = groups -WDUMP = @WDUMP@ -dump -JADECAT = @JADECAT@ -JADEBIN = @JADEBIN@ -DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html -DB2HTML = @DB2HTML@ -MAN2HTML = @MAN2HTML@ -G2H_CMD = groff -mandoc -Thtml -TARGET_OS = @host@ -PERL = perl -DOC_DIR = doc/source -DOC_TMP = $(DOC_DIR)/tmp -DOC_STATUS = @DOC_STATUS@ - -# Program to do LF->CRLF -# -# The sed version should be the most portable, but it doesn't for for me, -# the other two do. FIXME. -# - Jon -#DOSFILTER = $(SED) -e $$'s,$$,\r,' -#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}' -DOSFILTER = $(PERL) -p -e 's/\n/\r\n/' -CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa -#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX) - -############################################################################# -# Setup for make distribution rh and suse for now -############################################################################# - -TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz -RPM_BASE = @RPM_BASE@ - -############################################################################# -# We include these files in our distributions -############################################################################# -CONFIGS = config trust default.action match-all.action user.action default.filter user.filter -# take care that no CVS .cvsignore or other crappy files -# are included here -# and escape every '#' in the find. doh. -CONFIG_FILES = $(CONFIGS) \ - `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` - -DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \ - `find doc/webserver/ -name "*.html" | grep -v "$webserver\|team$\/index\.html"` \ - `find doc/webserver/ -name "*.css"` \ - privoxy.1 - -############################################################################# -# Filenames and libraries -############################################################################# - -C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \ - errlog.c filters.c gateway.c jbsockets.c jcc.c \ - list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \ - urlmatch.c - -C_OBJS = $(C_SRC:.c=.@OBJEXT@) -C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h - -W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c -W32_FILES = @WIN_ONLY@w32.res -W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES) -W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h -W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32 -W32_INIS = @WIN_ONLY@config.txt trust.txt - -PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c -PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@) -PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h) - -PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c -PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@) -PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h - -# No REGEX (maybe because dynamically linked pcreposix): -REGEX_SRC = -@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c - -REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@) -REGEX_HDRS = $(REGEX_SRC:.c=.h) - -# Dependencies introduced by #include "project.h". -PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h - -# Socket libraries for platforms that need them explicitly defined -SOCKET_LIB = @SOCKET_LIB@ - -# PThreads library, if needed. -PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@ - -SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) -OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) -HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) -LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) - - -############################################################################# -# Compiler switches -############################################################################# - -# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build. -# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a -# Win32 GUI build. -# The flag "-pthread" is required if using Pthreads under Linux (and -# possibly other OSs). -SPECIAL_CFLAGS = @SPECIAL_CFLAGS@ - -# Add your flags here -OTHER_CFLAGS = - -CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ - @STATIC_PCRE_ONLY@ -Ipcre - -LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) - - -############################################################################# -# Build section. -# -# There should NOT be any targets above this line. -############################################################################# -all: $(PROGRAM) default.action - - -############################################################################# -# Phony targets -############################################################################# -.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \ -suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \ -install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \ -PID_DEST check_doc install-strip uninstall GROUP_T - -############################################################################# -# Define this explicitly because Solaris is broken! -############################################################################# -%.o: %.c - $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ - - -############################################################################# -# Strip master copy comments from default.action: -############################################################################# -default.action: default.action.master - $(GREP) -v '^#MASTER#' $< > $@ - -############################################################################# -# Win32 config files -############################################################################# - -inifiles: $(W32_INIS) - -config.txt: config - $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \ - -e 's!\logfile logfile!logfile privoxy.log!' \ - -e 's!#Win32-only: !!' \ - < $< | \ - $(DOSFILTER) > $@ - # LF to CRLF in default.action - $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action - # LF to CRLF in default.filter - $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter - -trust.txt: trust - $(DOSFILTER) < $< > $@ - -############################################################################# -# Pre-dist check: -############################################################################# -dist-check: - @if [ -d CVS ]; then \ - $(ECHO) "***************************************************"; \ - $(ECHO) "*** ***"; \ - $(ECHO) "*** WARNING ***"; \ - $(ECHO) "*** ***"; \ - $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \ - $(ECHO) "*** that you are trying to build a distribution ***"; \ - $(ECHO) "*** package based on a checked out, not an ***"; \ - $(ECHO) "*** exported copy of the source tree. Please ***"; \ - $(ECHO) "*** see \"Releasing a new version\" in the ***"; \ - $(ECHO) "*** developer manual. ***"; \ - $(ECHO) "*** ***"; \ - $(ECHO) "***************************************************"; \ - $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \ - $(ECHO) -n "really want to proceed: "; \ - read answer; \ - if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \ - fi; - - -############################################################################# -# create tar.gz from CVS: -# This make-target is usually called through 'create-archive'. If you -# run 'make create-snapshot' without setting SNAPVERSION, you'll get a -# tar.gz with the current date in the name and as a releasenumber in the -# spec-file. But the main usage is to run it as follows (Red Hat example): -# make SNAPVERSION=1.6x create-snapshot -# This creates a tar.gz and spec-file for a Red Hat 6.x version. -############################################################################# -create-snapshot: - @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \ - [ x"$$tag" = x"(none)" ] && tag=HEAD; \ - echo "*** Creating package from $$tag!"; \ - TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \ - cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \ - cd $$TMPDIR/current; \ - TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ - if $(SED) -e 's/^$Version:$.*/\1 $(RPM_VERSION)/g' \ - -e 's/^$Release:$.*/\1 $(SNAPVERSION)/g' \ - privoxy-rh.spec > $$TMPFILE ; then \ - $(MV) -f $$TMPFILE privoxy-rh.spec; \ - else \ - $(ECHO) "Could not set version info in specfile."; \ - exit 1;\ - fi;\ - if $(SED) -e 's/^$Version:$.*/\1 $(RPM_VERSION)/g' \ - -e 's/^$Release:$.*/\1 $(SNAPVERSION)/g' \ - privoxy-suse.spec > $$TMPFILE ; then \ - $(MV) -f $$TMPFILE privoxy-suse.spec; \ - else \ - $(ECHO) "Could not set version info in specfile."; \ - exit 1;\ - fi; \ - $(RM) $$TMPFILE; \ - cd $$TMPDIR/current; \ - $(TAR) --exclude ".cvsignore" --exclude "CVS" \ - -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \ - $(RM) -rf $$TMPDIR - @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz" - - -############################################################################# -# looks at the version of Makefile and exports a corresponding source-tree -# example: if the Makefile has the sticky tag v_2_9_13, you'll get -# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for -# Red Hat and one for SuSe (different spec-files) -############################################################################# -create-archive: - make SNAPVERSION=$(SNAPVERSION) create-snapshot - -############################################################################# -# RPM specifice stuff (SuSE or Redhat, ..) -############################################################################# -rpm-stuff: dist-check clean clobber - for dir in RPMS SRPMS BUILD SOURCES SPECS; do \ - if [ ! -w $(RPM_BASE)/$$dir ]; then \ - $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \ - $(ECHO) "Or add a suitable path to .rpmmacros like."; \ - $(ECHO) "%_topdir /home/foo/rpm-build"; \ - exit 1; \ - fi; \ - done; \ - -check-release: - @if [ "$(RPM_PACKAGEV)" = "" ]; then \ - echo ; \ - echo " ERROR: NO RPM_PACKAGEV VALUE"; \ - echo " No value given for RPM_PACKAGEV. Please use:"; \ - echo " make dist-upload RPM_PACKAGEV=release"; \ - echo " where \"release\" is the release number you want to and"; \ - echo " where \"dist\" is the name of the distro (redhat or suse)"; \ - echo ; \ - echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \ - echo ""; \ - echo "ATTENTION: If your distribution use a specific tag on the"; \ - echo " release field (like \"cl\" for Conectiva, and"; \ - echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \ - echo " given to RPM_PACKAGEV. It will be added automaticaly."; \ - echo " Do it like you would do for a redhat package,"; \ - echo " (i.e. just the number)."; \ - echo ; \ - exit 1; \ - fi - - -############################################################################# -# Create Conectiva specfile from RedHat specfile -############################################################################# -conectiva-spec: - $(RM) privoxy-cl.spec - chmod a+x genclspec.sh - ./genclspec.sh - -############################################################################# -# Conectiva distribution for x86 -############################################################################# -conectiva-dist: rpm-stuff conectiva-spec - - $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . - $(RPMBUILD) --clean -ta $(TAR_ARCH) - if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi - -conectiva-upload: check-release - make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl - -############################################################################# -# redhat distribution alpha and x86 -############################################################################# -redhat-dist: rpm-stuff - echo $(CONFIG_FILES) - $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . - $(RPMBUILD) --clean -ta $(TAR_ARCH) - if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi - -# For testing build issues only! Use redhat-dist for official releases. -redhat-test: - echo $(CONFIG_FILES) - $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . - $(RPMBUILD) --clean -tb $(TAR_ARCH) - if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi - @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!" - -# anonymously ncftps the rpms to sourceforge -redhat-upload: check-release - ncftpput -u anonymous -p ijbswa-developers(a)lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm -# better should use `arch` here instead of ix86 to support other platforms too - ncftpput -u anonymous -p ijbswa-developers(a)lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm - @$(ECHO) ------------------------------------------------------- - @$(ECHO) Now goto - @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 - @$(ECHO) ... and release the files. - @$(ECHO) ------------------------------------------------------- - # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118 - - -############################################################################# -# Creates a Red Hat sourcepackage from CVS (not from the current sources -# on disk) -############################################################################# -redhat-srpm: - make create-archive - $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz - - -############################################################################# -# suse distribution. works fine. no need to be root. -############################################################################# -suse-dist: rpm-stuff -# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ -# if $(SED) -e 's/^$Version:$.*/\1 $(RPM_VERSION)/g' \ -# -e 's/^$Release:$.*/\1 $(RPM_PACKAGEV)/g' \ -# privoxy-suse.spec > $$TMPFILE ; then \ -# $(MV) -f $$TMPFILE privoxy-suse.spec; \ -# else \ -# $(ECHO) "Could not set version info in specfile."; \ -# exit 1;\ -# fi - - $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . - $(RPMBUILD) --clean -ta $(TAR_ARCH) - if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi - -# anonymously ncftps the rpms to sourceforge -suse-upload: check-release - ncftpput -u anonymous -p ijbswa-developers(a)lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm -# better should use `arch` here instead of ix86 to support other platforms too - ncftpput -u anonymous -p ijbswa-developers(a)lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm - @$(ECHO) ------------------------------------------------------- - @$(ECHO) Now goto - @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 - @$(ECHO) ... and release the files. - @$(ECHO) ------------------------------------------------------- - -# handle with care. use with root. -suse-clean: - $(RPM) -e junkbuster-suse || true - $(RM) -r /etc/junkbuster - $(RM) -r /etc/rc.d/junkbuster* - $(RM) -r /var/run/junkbuster.pid - $(RM) -r /var/log/junkbuster - $(RM) /etc/init.d/junkbuster - $(RM) /usr/sbin/junkbuster - $(RM) /usr/sbin/rcjunkbuster - $(RM) /usr/share/man/man1/junkbuster.1.gz - $(RPM) -e privoxy-suse || true - $(RM) -r /etc/privoxy - $(RM) -r /etc/rc.d/privoxy* - $(RM) -r /var/run/privoxy.pid - $(RM) -r /var/log/privoxy - $(RM) /etc/init.d/privoxy - $(RM) /usr/sbin/privoxy - $(RM) /usr/sbin/rcprivoxy - $(RM) /usr/share/man/man1/privoxy.1.gz - -############################################################################# -# generic distribution -############################################################################# -gen-dist: dist-check - @$(ECHO) "" - @$(ECHO) "You have run autoconf && autoheader && ./configure right?" - @$(ECHO) "" - $(MAKE) $(PROGRAM) - $(STRIP_PROG) $(PROGRAM) - $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) -# add program - (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) -# add config files - for foo in $(CONFIG_FILES); do \ - (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ - done; -# add documentation - for foo in $(DOC_FILES); do \ - (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ - done; -# and zip the archive - $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) - $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar - @$(ECHO) Distribution with binary created. - -# anonymously ncftps the package to sourceforge -gen-upload: - ncftpput -u anonymous -p ijbswa-developers(a)lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz - @$(ECHO) ------------------------------------------------------- - @$(ECHO) Now goto - @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 - @$(ECHO) ... and release the files. - @$(ECHO) ------------------------------------------------------- - -# use with care -gen-clean: - $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar* - -############################################################################# -# solaris distribution. verified on SF machines by swa. -############################################################################# -solaris-dist: gen-dist - @$(ECHO) Done. -# anonymously ncftps the package to sourceforge -solaris-upload: gen-upload - @$(ECHO) Done. -# use with care -solaris-clean: gen-clean - @$(ECHO) Done. - -############################################################################# -# hpux distribution -############################################################################# -hpux-dist: - @$(ECHO) coming soon. -hpux-upload: - @$(ECHO) coming soon. - -############################################################################# -# debian distribution -############################################################################# -debian-dist: - @$(ECHO) coming soon. -debian-upload: - @$(ECHO) coming soon. - -############################################################################# -# macosx distribution -############################################################################# -macosx-dist: - @$(ECHO) coming soon. -macosx-upload: - @$(ECHO) coming soon. - -############################################################################# -# amiga distribution -############################################################################# -amiga-dist: - @$(ECHO) coming soon. -amiga-upload: - @$(ECHO) coming soon. - -############################################################################# -# freebsd distribution. verified on SF machines by swa. -############################################################################# -freebsd-dist: gen-dist - @$(ECHO) Done. -# anonymously ncftps the package to sourceforge -freebsd-upload: gen-upload - @$(ECHO) Done. -# use with care -freebsd-clean: gen-clean - @$(ECHO) Done. - -############################################################################# -# Windows distribution -############################################################################# -win-dist: - $(ECHO) Not implemented. - - -############################################################################# -# Tarball distribution: No CVS dirs, dotfiles, debian build dir, -# (FIXME:) only parts of the static / generated docs mix in doc/webserver -############################################################################# - -tarball-dist: dist-check clean clobber - $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) - - for i in `find . -type f -a -not $ -path "*/CVS*" -o -name ".*" \ - -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \ - -name "PACKAGERS" $`; do \ - files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \ - done && \ - cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ - -# and zip the archive - $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) - $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar - @$(ECHO) Tarball distribution created. - -# anonymously ncftps the tarball to sourceforge -tarball-upload: - ncftpput -u anonymous -p ijbswa-developers(a)lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz - @$(ECHO) ------------------------------------------------------- - @$(ECHO) Now goto - @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 - @$(ECHO) ... and release the files. - @$(ECHO) ------------------------------------------------------- - -tarball-clean: - $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz - -############################################################################# -# -# Documentation -# -# converts doc/source/*.sgml into html and man pages -# -############################################################################# - -# developer manual -dok-devel: - $(RM) doc/webserver/developer-manual/*.html - $(RM) -r doc/source/developer-manual - mkdir -p doc/source/developer-manual - cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/ - -# user manual -dok-user: - $(RM) doc/webserver/user-manual/*.html - $(RM) -r doc/source/user-manual/ - mkdir -p doc/source/user-manual - cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/ - # FIXME: temp fix so same stylesheet gets in more than one place so it works - # for all doc set-ups, including the 'user manual' config option in local - # system where it MUST be in same directory as html. - $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html - -# faq -dok-faq: - $(RM) doc/webserver/faq/*.html - $(RM) -r doc/source/faq - mkdir -p doc/source/faq - cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/ - -# man page, one variation. Try to use the next target, just 'make man'. -dok-man: - $(RM) doc/man/* doc/webserver/man-page/*.html -ifneq ($(MAN2HTML),false) - $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html - man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html - $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html -else - $(MAKE) groff2html -endif - -# Build man page from sgml. This requires the SGMLSpm perl module. -# See CPAN, or your favorite perl repository. This is the preferred -# target for man page generation! -man: dok-release - mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\ - nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\ - perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\ - perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \ - perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \ - perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \ - perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \ - perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \ - $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1 - -# For those with man2html ala RH7s. -man2html: - mkdir -p doc/webserver/man-page -ifneq ($(MAN2HTML),false) - $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html - $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html - $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html -# Twice because my version of man2html is pulling in commas and periods in URLs. - $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html - $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html - $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html -# Get rid of spurious from conversion. (How to do this with perl?) - $(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.* -else - $(MAKE) groff2html -endif - - -# Otherwise we get plain groff conversion. -groff2html: - $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html - - -# readme page and INSTALL file -dok-readme: dok-release - cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\ - env -u LANG $(WDUMP) tmp.html > ../../README ;\ - $(DB)-notoc -V nochunks install.sgml > tmp.html &&\ - env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\ - $(RM) tmp.* - -# index.sgml is used to create both the Home Page, and a local index -# for documentation, etc. -# -# index.html for webserver: -dok-webserver: - cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html - $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ - s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\ - s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\ - s/\.\d\. //;\ - s/__copy/©/'\ - doc/webserver/index.html && $(RM) doc/webserver/*.bak - -# privoxy-index.html for local documentation: -dok-index: - cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html - $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ - s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\ - s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\ - s/\.\d\. //;\ - s/__copy/©/' \ - doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak - -# Main documentation target. -dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index - @$(ECHO) Documentation created. - -# -# an alternative to the above dok. disabled man page creation for the moment -# -redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors - @$(ECHO) Documentation created. - -## Make README -redhat-readme: - cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \ - tmp.html > ../../README && $(RM) -r tmp.html - -## Make AUTHORS file -dok-authors: - cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \ - tmp.html > ../../AUTHORS && $(RM) tmp.html - -# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content -# exceptions accordingly. This needs to go before any doc building (doh). -dok-release: - @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS) - @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\ - s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \ - doc/source/*sgml doc/source/*/*sgml - $(RM) -r doc/source/*bak doc/source/*/*bak -ifeq ($(CODE_STATUS),stable) - @$(ECHO) Setting docs to stable $(VERSION) - @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\ - s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \ - doc/source/*sgml doc/source/*/*sgml - $(RM) -r doc/source/*bak doc/source/*/*bak -else - @$(ECHO) Setting docs to not stable $(VERSION) - @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\ - s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \ - doc/source/*sgml doc/source/*/*sgml - $(RM) -r doc/source/*bak doc/source/*/*bak -endif - -# Create release announcement in text and html, with short and long versions. -# This is a standalone target, and must be invoked directly. -# announce: dok-release -# mkdir -p $(DOC_TMP) -# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\ -# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt -# cd $(DOC_TMP) && $(DB) announce.sgml &&\ -# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\ -# mv -f *html *txt ../../.. -# rm -fr $(DOC_TMP) - -# The main Privoxy config file, generated from sgml sources. -# NOTE: This will require some hand editing. The new file is outputted -# as config.new so that problem sections can be compared to previous -# version. This is hardcored to w3m for html/text conversion. Also, -# requires the shell util 'fmt'. -config-file: dok-release - cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\ - env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.* - $(PERL) -i.bak utils/prepare-configfile.pl config.new - - $(RM) *.bak - @$(ECHO) "****************************************************" - @$(ECHO) "The output file is config.new." - @$(ECHO) "Now -- you need to hand edit the results!!!" - @$(ECHO) "In particular, check the Debug levels, the" - @$(ECHO) "permit-access, forward & socks examples and the" - @$(ECHO) "various user-manual examples, which all" - @$(ECHO) "probably got hammered." - @$(ECHO) "****************************************************" - -# config file, alternate version using lynx (perl stuff unfinished). Lynx -# does not do so good a job. -config-file-alt: - cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\ - $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\ - lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.* - $(PERL) -pi -e 's/^( )//;\ - s/:$\/:\n/' config.new - -############################################################################# -# -# Webserver -# -# moves dokumentation to webserver -# -############################################################################# -webserver: tidy - @$(ECHO) ------------------------------------------------------- - @$(ECHO) You will need to "create" a SF shell first: - @$(ECHO) ssh -t USER,PROJECT(a)shell.sourceforge.net create - @$(ECHO) Please make sure your documentation files are up to date. - @$(ECHO) Note that this command updates the home page and scps - @$(ECHO) all stuff to the webserver, it will not remove obsolete documents. - @$(ECHO) You will also need to change the user-manual symlink manually. - @$(ECHO) ------------------------------------------------------- - - @$(ECHO) Uploading html - @cd doc/webserver; \ - upload=`find . -type f -a -not $ -path "*/CVS*" -o -path "*/results*" $`; \ - $(TAR) c $$upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp' - - @$(ECHO) Fixing permissions - @ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true' - @ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true' - @ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true' - - -web-actions: tidy - @$(ECHO) Uploading - @cd doc/webserver/actions; \ - upload=`find . -type f -a -not $ -path "*/CVS*" -o -path "*/results*" $`; \ - $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm' - - @$(ECHO) Fixing permissions - @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null' - @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null' - -## -dok-put: - tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \ - --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\ - doc/* INSTALL LICENSE AUTHORS README \ - -czf $(DOC_FILE) ;\ - $(ECHO) "Uploading doc package ..." ;\ - scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/ - @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true' - $(RM) $(DOC_FILE) - -dok-get: - cd /tmp ;\ - $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\ - $(TAR) -zxvf $(DOC_FILE) - - -############################################################################# -# Source file dependencies -############################################################################# - -actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h -cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h -cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h -cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h -deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS) -encode.@OBJEXT@: encode.c encode.h config.h -errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h -filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h -gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h -jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h -jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h -list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h -loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h -loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h -miscutil.@OBJEXT@: miscutil.c miscutil.h config.h -parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h -ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h -urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h - -# GNU regex -gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h - -# PCRS -pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h - -# PCRE -pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h -pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h -pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c -pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h -pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h - -# An auxiliary program makes the PCRE default character table source - -pcre/chartables.c: pcre/dftables@EXEEXT@ - pcre/dftables@EXEEXT@ >pcre/chartables.c - -pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h - $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c - -# Win32 -w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h -w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h -win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h - -w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h - windres -D__MINGW32__=0.2 -O coff -i $< -o $@ - -# AmigaOS -@AMIGAOS_ONLY@OBJS += amiga.o -@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos) -@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code -@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel -@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o -@AMIGAOS_ONLY@else -@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS -@AMIGAOS_ONLY@endif -@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h - - -$(PROGRAM): $(OBJS) $(W32_FILES) - $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) - -clean: - $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp - -tidy: - $(RM) `find . -name "*~"` - $(RM) `find . -name "#*#"` # Emacs backup files - $(RM) `find . -name ".\#*"` - -clobber: tidy - $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \ - privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new - $(RM) -r autom4te.cache - -# -# FIXME: What is all this? -# - $(RM) cscope.* *.pdb *.lib *.exp - -distclean: clobber - -tags: $(SRCS) $(HDRS) - etags $(SRCS) $(HDRS) - -CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \ - $(ECHO) "$(CONF_BASE)/privoxy";\ - else\ - $(ECHO) "$(CONF_BASE)";\ - fi) - -LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \ - $(ECHO) "/var/log/privoxy" ;\ - else\ - $(ECHO) "$(LOGS_DEST)";\ - fi) - -PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \ - $(ECHO) "/var/run" ;\ - else\ - $(ECHO) "$(PIDS_DEST)";\ - fi) - -check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \ - $(ECHO) "1";\ - else\ - $(ECHO) "0";\ - fi) - -# If USER is specified but no GROUP, assume there is a GROUP of same name. -GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \ - $(ECHO) "$(USER)" ;\ - else\ - $(ECHO) "$(GROUP)";\ - fi) - -install-strip: - $(MAKE) install STRIP=-s - -# FIXME: Test USER and GROUP on Slack to make sure this works as -# intended. -# -# FIXME: id handling needs help, probably via configure, since 'id -u' is not -# universally reliable (eg Solaris). Group handling could be better. -# Perhaps the whole user/group validation should be done here, and simplified. -PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS) -install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T - @# Quick test for valid USER. - @if [ -n "$(USER)" ]; then \ - $(ID) $(USER) >/dev/null || exit 1;\ - fi - @# Test for valid group. FIXME. USER does not have to belong to GROUP - @# for file ownership purposes. -# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \ -# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\ -# fi - - @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation" - $(CHMOD) $(DIR_MODE) $(MKDIR) - @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \ - $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \ - $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST) - @# Install the executable binary, strip if invoked as install-strip - @test -n "$(STRIP)" &&\ - $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\ - $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST) - $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST) - - @# Install the DOCS and man page. install-sh only does one file at a time. - @# FIXME: only handles jpegs. - -@if [ $(check_doc) = 0 ]; then \ - DOC=$(DOC_DEST) ;\ - else \ - DOC=$(prefix)/doc/privoxy ;\ - fi;\ - $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \ - $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\ - if [ -d "$(DOK_WEB)" ]; then \ - $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\ - for i in user-manual developer-manual faq; do \ - for ii in $(DOK_WEB)/$$i/*html; do \ - $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\ - done ;\ - done ;\ - for i in $(DOK_WEB)/user-manual/*jpg; do \ - $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\ - done ;\ - $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\ - $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\ - $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\ - $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\ - $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\ - $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\ - $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\ - $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\ - fi - @# Not all platforms support gzipped man pages. - @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1 - -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1 - - @# Change the config file default directories according to the configured ones - @$(ECHO) Rewriting config for this installation - @if [ -f config.base ] ; then \ - $(CAT) config >config~ ;\ - $(MV) config.base config ;\ - fi - $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \ - $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp - -@if [ $(check_doc) = 0 ]; then \ - $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\ - else \ - $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\ - fi;\ - $(MV) config config.base - $(MV) config.updated config - - @# Install the config support files. Test for root install, and abort - @# if there is no privoxy user, and no other user was enabled during - @# configure. Later, install init script if appropriate. - @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates - @for i in `find templates -type f`; do \ - $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\ - done - - @# FIXME: group/user validation is overly convoluted. - @# If superuser install ... we require a minimum of group ownership - @# of those files the daemon writes to, to be non-root owned. - @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\ - if [ x$(USER) = x ] || [ $(USER) = root ]; then \ - if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \ - if [ "`$(ID) privoxy`" ] && \ - $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \ - $(ECHO) "Warning: Setting group owner to privoxy";\ - GROUP_T=privoxy ;\ - else \ - $(ECHO) "******************************************************************" ;\ - $(ECHO) " WARNING! WARNING! installing config files as root!" ;\ - $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\ - $(ECHO) " and to install the config files as that user and/or group!" ;\ - $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\ - $(ECHO) "*******************************************************************" ;\ - exit 1 ;\ - fi ;\ - else \ - GROUP_T=$(GROUP) ;\ - fi ;\ - INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\ - else \ - $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\ - INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\ - GROUP_T=$(GROUP_T) ;\ - fi ;\ - else \ - if [ ! "`id $(USER)`" = "`id`" ] ;then \ - $(ECHO) "** WARNING ** current install user different from configured user!!" ;\ - $(ECHO) "Edit may fail." ;\ - fi ;\ - INSTALL_CONF="$(INSTALL_R)" ;\ - fi ;\ - $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\ - for i in $(CONFIGS); do \ - if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \ - $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\ - $(ECHO) Installing fresh $$i;\ - $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\ - elif [ -s "$(CONF_DEST)/$$i" ]; then \ - $(ECHO) Installing $$i as $$i.new ;\ - $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\ - NEW=1;\ - else \ - $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\ - fi ;\ - done ;\ - if [ -n "$$NEW" ]; then \ - $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\ - $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\ - fi ;\ - [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \ - $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\ - $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\ - if [ x$$USER != x ]; then \ - $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \ - $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\ - fi ;\ - if [ x$$GROUP_T != x ]; then \ - $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \ - $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\ - fi ;\ - $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\ - if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \ - if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \ - $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \ - $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \ - $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \ - $(SED) 's+%USER%+$(USER)+' | \ - $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\ - $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\ - $(ECHO) "Installing for Slackware." ;\ - $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\ - elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \ - $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\ - $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\ - $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\ - $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\ - $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\ - $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\ - $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\ - $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\ - elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \ - $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\ - $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\ - $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\ - fi ;\ - else \ - $(ECHO) "No init script installed, install it manually if needed" ;\ - fi - $(RM) config.base config.tmp - @# mmmmm, good. - @$(ECHO) "$(PROGRAM_V) installation succeeded!" - @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)" - -# rmdir is used as a precaution since it will not remove non-empty -# directories. RH init script creates lock file and pid file. -uninstall: CONF_DEST LOG_DEST PID_DEST check_doc - @$(ECHO) Starting Privoxy uninstallation - @# KILL privoxy if running - @# XXX: the chkconfig line may need a DESTDIR prefix. - -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \ - $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\ - chkconfig --del $(PROGRAM) 2>/dev/null;\ - fi - -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\ - $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || : - -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\ - $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || : - - @# Program binary - @$(ECHO) Removing $(PROGRAM) binary - $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~ - - @# config files and dir, and maybe old install backups - -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \ - $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\ - $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\ - cd $(DESTDIR)$(CONF_DEST) ;\ - for i in $(DESTDIR)$(CONFIGS); do \ - [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\ - done ;\ - fi - @$(ECHO) Removing $(PROGRAM) config files - -@for i in $(DESTDIR)$(CONFIGS); do \ - test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\ - $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\ - done - -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\ - $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*" - - @# man page and docs - @$(ECHO) Removing $(PROGRAM) docs - -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1* - -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy - - @# Log and pidfile - @$(ECHO) Removing $(PROGRAM) logs - -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid - - @# Final clean up of unused directories. Special handling of CONF and LOG - # destinations. - @$(ECHO) Removing $(PROGRAM) directories - @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \ - if test -d $$i; then \ - $(ECHO) Removing $$i ;\ - $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\ - fi;\ - done - @if [ ! "$(prefix)" = "/usr/local" ] ;then \ - for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \ - $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \ - if test -d $$i; then \ - $(ECHO) Removing $$i ;\ - $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\ - fi;\ - done;\ - if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \ - $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\ - $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\ - fi ;\ - if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \ - $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\ - $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\ - fi ;\ - if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \ - $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\ - $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\ - fi ;\ - if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \ - $(ECHO) Removing $(DESTDIR)$(prefix) ;\ - $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\ - $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\ - fi;\ - fi - - @# init scripts and logrotate - @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \ - $(ECHO) Removing $(PROGRAM) init script ;\ - if [ -f $(DESTDIR)/etc/slackware-version ] && \ - [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \ - $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\ - elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \ - && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \ - $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\ - elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \ - $(RM) $(DESTDIR)/etc/init.d/privoxy ;\ - else \ - $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\ - fi ;\ - fi - @$(ECHO) Privoxy uninstalled, bye - -coffee: - @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \ - -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \ - -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \ - -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \ - -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \ - -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \ - -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat - -############################################################################# - -## Local Variables: -## tab-width: 3 -## end: - -# $Log: GNUmakefile.in,v $ -# Revision 1.180 2009/02/28 08:28:14 fabiankeil -# pcrs.o doesn't depend on pcre/pcre.h if we are linking -# dynamically. Patch provided by drauh in #2056286. -# -# Revision 1.179 2009/02/22 14:48:31 hal9 -# Updates to the 'make webserver' target that recreates the home page and uploads -# fresh documents to reflect new SF realities, and more explanation of process. -# -# Revision 1.178 2009/02/08 18:35:48 fabiankeil -# Move the match-all section into a separate file -# (match-all.action) so we can safely overwrite the -# default actions when updating. Based on Roland's -# patch #1563977. -# -# Revision 1.177 2009/01/13 16:44:32 fabiankeil -# Delete the standard.action file after moving -# the pre-settings over to the default actions. -# -# Revision 1.176 2008/09/21 13:24:37 fabiankeil -# Add Roland's man page fixes from 19_manpage_fixup.dpatch. -# -# Revision 1.175 2008/08/30 12:03:07 fabiankeil -# Remove FEATURE_COOKIE_JAR. -# -# Revision 1.174 2008/07/18 17:50:47 fabiankeil -# Fix whitespace. -# -# Revision 1.173 2008/06/18 18:28:42 fabiankeil -# Remove PDF-related stuff. -# -# Revision 1.172 2008/06/17 16:16:08 fabiankeil -# - Stop building text files nobody cares about. -# - Update copyright year. -# -# Revision 1.171 2008/06/13 15:24:57 fabiankeil -# Move previously inline'd Perl code for the config-file target -# into a separate file, have it work with older perl releases, -# clean it up a bit and fix the "underlining" code. -# -# Revision 1.170 2008/06/12 16:38:50 fabiankeil -# Add third-level domain to URL in dok-get target. -# -# Revision 1.169 2008/06/09 17:28:31 fabiankeil -# - Recommend https for releasing files. -# - Fix a warning about datarootdir being ignored. -# -# Revision 1.168 2008/05/23 18:03:12 fabiankeil -# - Shorten meta description inserted in dok-webserver -# and dok-index target. -# - In config-file target, unset LANG for w3m as we -# might otherwise end up with multi-byte characters. -# -# Revision 1.167 2008/05/23 14:39:09 fabiankeil -# Silence dok-user complaint about @# not being found. -# -# Revision 1.166 2008/05/23 14:04:57 fabiankeil -# - Get config-file target working with more recent Perl -# versions. The generated file is still messed up, though. -# - Fix comment typo. -# -# Revision 1.165 2008/05/22 16:57:23 fabiankeil -# Fix coffee machine. -# -# Revision 1.164 2008/05/22 10:26:26 fabiankeil -# - Remove parsers.@OBJEXT@'s dependency on encode.h. -# - Include Emacs backup files in tidy target again. -# -# Revision 1.163 2008/05/04 18:01:53 fabiankeil -# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h. -# -# Revision 1.162 2008/03/30 13:31:42 fabiankeil -# Add DESTDIR support for the uninstall target. -# -# Revision 1.161 2008/03/30 13:19:13 fabiankeil -# Add DESTDIR support for the install target. Closes PR#1910612. -# Patch by Radoslaw Zielinski with minor modifications. -# -# Revision 1.160 2008/03/27 18:27:19 fabiankeil -# Remove kill-popups action. -# -# Revision 1.159 2008/03/21 11:13:53 fabiankeil -# Only gather host information if it's actually needed. -# Also move the code out of accept_connection() so it's less likely -# to delay other incoming connections if the host is misconfigured. -# -# Revision 1.158 2007/12/11 21:29:25 fabiankeil -# Fix dependency list for cgiedit.c. -# -# Revision 1.157 2007/12/10 02:28:02 hal9 -# Unset $LANG for text processing of docs so we get pure text. -# -# Revision 1.156 2007/11/15 03:17:43 hal9 -# Some workaround changes to the config file perl stuff and comments, which is -# broken here all by itself on perl 5.8.8. -# -# Revision 1.155 2007/09/22 16:23:25 fabiankeil -# Update copyright line. -# -# Revision 1.154 2007/02/07 11:52:40 fabiankeil -# Fix suse-dist as described in BR#1654052. -# (I didn't test it, but it's done the same -# way in redhat-dist which is known to work). -# -# Revision 1.153 2007/01/07 07:36:36 joergs -# Added AmigaOS4 support. -# -# Revision 1.152 2006/12/13 14:53:51 etresoft -# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created. -# -# Revision 1.151 2006/11/30 01:08:55 hal9 -# Fix problem with variable declarations in the Slackware section. Thanks to higuita. -# -# Revision 1.150 2006/10/25 11:55:45 fabiankeil -# Fix sed regexes for rewriting "confdir ." and "logdir .". -# Thanks to Darel Henman for reporting this. -# -# Revision 1.149 2006/10/11 01:40:28 hal9 -# Apply patch from Neil McCalden to fix syntax issue. -# -# Revision 1.148 2006/09/26 10:57:58 hal9 -# Including Karsten's patch to fix make create-snapshot. -# -# Revision 1.147 2006/09/13 01:25:16 hal9 -# Make sure install forces in new default.action, default.filter, and -# standard.filter. These are privoxy files, not user files. -# -# Revision 1.146 2006/09/08 23:57:19 hal9 -# User manual images are now user-manual doc directory, and fix make install -# target accordingly. -# -# Revision 1.145 2006/09/08 02:32:00 hal9 -# Various changes to implement building and installing docs to be compatible -# with the new "user-manual" settings in config from Roland. Docbook does not -# seem to like dealing with more than one css file, so workaround that here. -# Change 'make install' so it provides p_doc.css in the user-manual doc -# directory so that functions well, and lastly modify 'make install' so that the -# PATH is automatically set, and the 'user-manual' directive should done during -# the install. -# -# Revision 1.144 2006/09/07 22:53:20 hal9 -# Make sure config sgml build related artifacts are cleaned out. -# -# Revision 1.143 2006/09/02 15:59:40 hal9 -# Add to code status to make install output. -# -# Revision 1.142 2006/08/29 01:46:24 hal9 -# Add user.filter to $CONFIGS. -# -# Revision 1.141 2006/08/12 03:54:37 david__schmidt -# Windows service integration -# -# Revision 1.140 2006/07/18 14:48:45 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.104.2.28 2004/06/10 17:06:05 hal9 -# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the -# only place it is used. -# -# Revision 1.104.2.27 2004/02/07 16:11:10 oes -# Make clobber remove the autom4te.cache dir. -# Closes BR #889300 -# -# Revision 1.104.2.26 2004/01/31 16:32:25 oes -# Adding a check for an htmldoc variant from the debian diff -# -# Revision 1.104.2.25 2004/01/31 01:15:33 oes -# Fixed a typo; updated copyright notice -# -# Revision 1.104.2.24 2003/12/03 10:30:02 oes -# - Added new dependency: actions.c -> ssplit.h -# - Excluded PDF docs from src tarball -# -# Revision 1.104.2.23 2003/04/20 17:28:52 hal9 -# Strip trailing spaces from config-file generation, bug #724596. -# -# Revision 1.104.2.22 2003/03/28 03:32:01 hal9 -# Minor changes for Privoxy home page: -# - Handle © more sanely -# - include link to announce.txt -# Also, disable 'make announce' target. -# -# Revision 1.104.2.21 2002/11/04 07:04:03 hal9 -# Catch up with main trunk install/uninstall. Quiet output, etc. -# -# Revision 1.104.2.20 2002/10/25 02:44:22 hal9 -# Port of make install, etc from main trunk. Needs testing! Add Slackware -# support, and other related changes. Update related docs. -# -# Revision 1.104.2.19 2002/09/26 22:50:02 hal9 -# New user-manual examples in config-file are getting wrapped. Add warning. -# -# Revision 1.104.2.18 2002/08/23 12:22:40 oes -# Added warning to broken install target -# -# Revision 1.104.2.17 2002/08/16 03:19:34 hal9 -# More (minor) cleanup of html before pdf processing to make some relative -# links work as pdf -> pdf. Upload pdf as zip archive now. -# -# Revision 1.104.2.16 2002/08/14 16:43:27 hal9 -# Added pdf docs to make webserver target. -# -# Revision 1.104.2.15 2002/08/11 20:02:41 hal9 -# New targets for man page (make man) and pdf (make dok-pdf) targets. -# -# Revision 1.104.2.14 2002/08/10 11:19:37 oes -# - Make -Ipcre (again) conditional on STATIC_PCRE -# - $(RPMBUILD) -> $(RPM) for SuSE -# - Add dependency: pcrs.o deps on config.h -# -# Revision 1.104.2.13 2002/08/07 15:13:54 hal9 -# Remove pdf2 target, and make it dok-shtml (single page html for pdf -# conversion). -# -# Revision 1.104.2.12 2002/08/06 11:29:36 oes -# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH -# -# Revision 1.104.2.11 2002/07/30 19:38:11 hal9 -# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what -# *I think* it was supposed to be (was breaking upload targets since it was -# set to RPM_VERSION). -# -# Revision 1.104.2.10 2002/07/27 22:56:53 kick_ -# cleanups of the redhat-srpm target -# -# Revision 1.104.2.9 2002/07/26 15:17:02 oes -# - Added generation of default.action from defaul.action.master -# - Deleted obsolete re_filterfile.txt generation -# -# Revision 1.104.2.8 2002/07/12 10:04:32 kick_ -# added helper targets to the makefile. They shouldn't break anything, but -# make my life a lot easier. -# -# The new rpm has been splitted into two parts, one for package installation/ -# removal, one for package building. -# Therefore rpm -ta isn't a valid command anymore and needs to be replaced -# by rpmbuild -ta (this is backwards compatible) -# -# Revision 1.104.2.7 2002/06/07 00:23:47 hal9 -# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs, -# thus breaking them completely. -# -# Revision 1.104.2.6 2002/06/02 03:26:25 hal9 -# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude -# index.html and team/index.html) -# -# Revision 1.104.2.5 2002/05/30 15:35:01 hal9 -# This is more cleanup on the make config-file target. Most issues for -# automatic generation are taken care of. There are still some problems -# that require hand editing. Namely, some of the examples that are > 80 chars. -# -# Revision 1.104.2.4 2002/05/29 02:12:17 hal9 -# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the -# new target is 'make config-file', _not_ make config. -# -# Revision 1.104.2.3 2002/05/29 02:05:48 hal9 -# 'make config' target added (WIP) for future generation of config file from -# text in u-m so the two are in sync. New generated config, which requires -# some hand editing for the time being. -# -# Revision 1.104.2.2 2002/05/28 02:32:55 hal9 -# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files -# not being cleaned up in doc/webserver. -# -# Revision 1.104.2.1 2002/05/26 17:19:34 hal9 -# Remove Table of Contents from readme with oes's dsl trick. -# -# Revision 1.104 2002/05/24 00:03:49 oes -# Use p_doc.css for the Homepage for consistency -# -# Revision 1.103 2002/05/23 23:19:00 oes -# Use dsl without TOC for the homepage -# -# Revision 1.102 2002/05/16 01:20:17 hal9 -# make announce target added. -# -# Revision 1.101 2002/05/15 12:28:46 oes -# Trying to keep Hal happy :) -# -# Revision 1.100 2002/05/08 13:48:18 hal9 -# Ooops, that trashed JB v2.0.2 comment. Fixed. -# -# Revision 1.99 2002/05/08 13:42:07 hal9 -# This fixes the numbering problem on index.html in contact info section (.1.). Using -# perl, since its way too convoluted to try to fix proper with docbook. -# -# Revision 1.98 2002/05/03 14:33:06 oes -# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find -# -# Revision 1.97 2002/04/27 20:27:43 swa -# no longer needed due to new -# PACKAGE_VERSION process -# -# Revision 1.96 2002/04/27 17:44:32 morcego -# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-) -# - Using the RM macro everywhere rm is called (either we use, or don't) -# - Same for RPM -# -# Revision 1.95 2002/04/27 15:37:25 swa -# replacing directory in document creation process -# no longer necessary. -# -# Revision 1.94 2002/04/27 08:23:29 swa -# pdf process reviewed and cleaned up -# -# Revision 1.93 2002/04/27 04:55:53 morcego -# privoxy-cl.spec now gets removed by clobber target -# -# Revision 1.92 2002/04/27 04:53:40 morcego -# Adding --exclude "PACKAGERS" to every tar command that applies (not for -# webserver target) -# -# Revision 1.91 2002/04/27 04:44:51 morcego -# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore -# the PACKAGERS file, as well privoxy-cl.spec (in case it was created) -# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and -# conectiva-upload -# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile -# for Conectiva Linux -# -# Revision 1.90 2002/04/26 17:46:53 swa -# be consistent -# -# Revision 1.89 2002/04/26 17:20:54 swa -# just produce single html files to proces them later with Destiller or somesuch. looks prettier. -# -# Revision 1.88 2002/04/25 19:13:57 morcego -# Removed RPM release number declaration on configure.in -# Changed makefile to use given value for RPM_PACKAGEV when on uploading -# targets (will produce an error, explaining who to do it, if no value -# if provided). -# -# Revision 1.87 2002/04/23 14:10:59 swa -# now create pdf documents -# -# Revision 1.86 2002/04/15 04:30:27 hal9 -# Missed two -pi.bak's on perl/cygwin problem. -# -# Revision 1.85 2002/04/14 01:05:34 hal9 -# Revert dok-webserver change for SF logo. -# -# Revision 1.84 2002/04/13 22:43:25 hal9 -# -Fix dok-webserver for SF logo (more perl). -# -Change all perl -pi to perl -pi.bak for Cygwin problem. -# -# Revision 1.83 2002/04/12 09:39:25 oes -# Excluding yet more files from tarball; making dist warning yet more scary -# -# Revision 1.82 2002/04/11 21:07:11 oes -# Excluding more files from tarball build -# -# Revision 1.81 2002/04/11 14:40:27 oes -# Fixed typo -- Thanks, Moritz! -# -# Revision 1.80 2002/04/11 12:50:00 oes -# Fixed tarball-dist target -# -# Revision 1.79 2002/04/11 06:49:28 oes -# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log -# -# Revision 1.78 2002/04/09 13:37:11 sarantis -# fix tar options typo -# -# Revision 1.77 2002/04/09 13:28:53 swa -# build suse and gen-dist with html docs -# -# Revision 1.76 2002/04/08 22:43:41 oes -# Fix: Include dotfiles in fixing webserver permissions -# -# Revision 1.75 2002/04/08 22:14:59 oes -# Silencing tar warnings in the web* targets -# -# Revision 1.74 2002/04/08 15:22:44 hal9 -# This has finishing touches for dok building. Should be ready to go. -# -The main doc build is now 'make dok', should work on Redhat too. -# -Removed man page from main doc build. It is built separately due to -# perl scripts that most aren't likely to have. -# -# Revision 1.73 2002/04/08 14:03:24 oes -# oes for al: Fix install target -# -# Revision 1.72 2002/04/08 13:42:11 oes -# Added safety check to *-dist targets; fixed permissions for feedback logfile -# -# Revision 1.71 2002/04/07 20:32:03 hal9 -# -Add meta data kludge for make dok-webserver via $(PERL). -# -Add subdirs for 'make dok-release'. -# -# Revision 1.70 2002/04/07 08:59:40 swa -# generated files. do NOT edit. -# fixed directory bug in makefile. -# -# Revision 1.69 2002/04/07 08:10:47 swa -# create some of the webserver docs -# automatically (in particular if -# those docs recycle other documentation -# fragments). Now committed webserver's -# index file. -# -# Revision 1.68 2002/04/07 07:58:11 swa -# create some of the webserver docs -# automatically (in particular if -# those docs recycle other documentation -# fragments) -# -# Revision 1.67 2002/04/07 05:31:42 hal9 -# Add 'dok-release' target: -# -Set doc entities to VERSION and CODE_STATUS during make. -# -Set doc conditional content flags (stable vs non-stable). -# A separate target for the time being but needs to be incorporated into -# dok build at some point. -# -Filter out a spurious ^G from new man page > html converion in man2html. -# -# Revision 1.66 2002/04/06 20:28:21 jongfoster -# Prettifying groff2html. -# Using GNU Make's conditional makefile feature rather than shell "if"s. -# (The shell "if"s were hiding errors) -# "perl" -> "$(PERL)" -# Spaces->tabs in a couple of places. -# -# Revision 1.65 2002/04/06 05:16:39 hal9 -# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP). -# -Both of these will soon be generated files. -# -# Revision 1.64 2002/04/04 22:14:51 oes -# No longer rely on find honoring -iname -# -# Revision 1.63 2002/04/04 21:06:22 swa -# cosmetics. -# -# Revision 1.62 2002/04/04 20:49:50 swa -# attempt to consolidate the -# different dokbook versions. -# -# Revision 1.61 2002/04/04 19:18:21 swa -# readme was leftover directory. use w3m instead -# of lynx to be consistent among developers. use -# consistent target naming. -# -# Revision 1.60 2002/04/04 12:25:41 oes -# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions -# -# Revision 1.59 2002/04/04 08:32:45 swa -# wrong name for tarball-dist target. further fixed content of tarball dist -# -# Revision 1.58 2002/04/04 06:32:58 hal9 -# New dok targets for make readme. -# -# Revision 1.57 2002/04/04 00:36:36 gliptak -# always use pcre for matching -# -# Revision 1.56 2002/04/03 22:28:03 gliptak -# Removed references to gnu_regex -# -# Revision 1.55 2002/04/03 19:54:29 swa -# freebsd tested to work. attempt to move tarball dist target forward -# -# Revision 1.54 2002/04/03 14:54:07 oes -# Standard clean and clobber semantics II -# -# Revision 1.53 2002/04/03 14:19:16 oes -# Standard clean and clobber semantics -# -# Revision 1.52 2002/04/03 02:56:18 hal9 -# Revert previous FAQ numbering kludge. -# -# Revision 1.51 2002/04/02 13:03:56 oes -# Added fix for webserver permissions -# -# Revision 1.50 2002/04/02 03:46:24 hal9 -# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort -# to make the Table of Contents not so 'busy' looking. SuSE needs testing :) -# -# Revision 1.49 2002/03/30 22:20:12 swa -# cd didn't work. neither did find. -# -# Revision 1.48 2002/03/30 19:04:06 swa -# people release differently. no good. -# I want to make parts of the docs only. -# -# Revision 1.47 2002/03/30 09:05:21 swa -# better packaging. better rpm building. -# tar failed on sun (no exclude there). -# -# Revision 1.46 2002/03/29 20:09:01 swa -# al's patch -# -# Revision 1.45 2002/03/29 19:45:45 swa -# for lazy swa -# -# Revision 1.44 2002/03/29 17:42:44 gliptak -# Correcting for Solaris tar limitations -# -# Revision 1.43 2002/03/29 07:40:03 swa -# fixed make webserver. doh -# -# Revision 1.42 2002/03/29 06:59:04 swa -# other users could not modify files on webserver -# -# Revision 1.41 2002/03/28 20:43:00 swa -# set make correctly -# -# Revision 1.40 2002/03/28 04:22:44 hal9 -# More on man2html stuff. -# -# Revision 1.39 2002/03/28 01:04:14 hal9 -# More man2html stuff for docs. -# -# Revision 1.38 2002/03/27 16:02:30 swa -# have a generic target -# -# Revision 1.37 2002/03/27 15:30:26 swa -# have a consistent appearance -# -# Revision 1.36 2002/03/27 14:58:08 swa -# can be used by mutilple targets -# -# Revision 1.35 2002/03/27 14:53:19 swa -# added solaris-dist -# -# Revision 1.34 2002/03/27 10:30:11 swa -# we want a html man file on the webserver -# -# Revision 1.33 2002/03/27 03:05:35 hal9 -# Added man2html target for docs (redhat-dok only for now) -# -# Revision 1.32 2002/03/26 22:29:54 swa -# we have a new homepage! -# -# Revision 1.31 2002/03/26 14:00:18 swa -# fixed make tarball, tarball-dist, tarball-clean -# -# Revision 1.30 2002/03/25 12:52:25 swa -# new targets -# -# Revision 1.29 2002/03/24 17:03:55 jongfoster -# Name change -# -# Revision 1.28 2002/03/24 16:19:48 swa -# configure needs to be generated. -# -# Revision 1.27 2002/03/24 16:13:57 swa -# generated files are a nono in cvs -# -# Revision 1.26 2002/03/24 15:36:02 swa -# did not build. -# -# Revision 1.25 2002/03/24 14:31:08 swa -# remove more crappy files. set RPM -# release version correctly. -# -# Revision 1.24 2002/03/24 14:19:55 swa -# set rpm package release in configure.in. nowhere else. -# -# Revision 1.23 2002/03/24 13:06:49 swa -# suse-clean now runs fine -# -# Revision 1.22 2002/03/24 12:56:21 swa -# name change related issues. -# -# Revision 1.21 2002/03/24 12:43:57 swa -# name change -# -# Revision 1.20 2002/03/24 11:39:17 jongfoster -# Renaming config files -# -# Revision 1.19 2002/03/22 20:53:03 morcego -# - Ongoing process to change name to JunkbusterNG -# - configure/configure.in: no change needed -# - GNUmakefile.in: -# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz -# - PROGRAM = jbng@EXEEXT@ -# - rh-spec now references as junkbusterng-rh.spec -# - redhat-upload: references changed to junkbusterng-* (package names) -# - tarball-dist: references changed to JunkbusterNG-distribution-* -# - tarball-src: now JunkbusterNG-* -# - install: initscript now junkbusterng.init and junkbusterng (when -# installed) -# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec -# - junkbusterng.spec: -# - References to the expression ijb where changed where possible -# - New package name: junkbusterng (all in lower case, acording to -# the LSB recomendation) -# - Version changed to: 2.9.13 -# - Release: 1 -# - Added: junkbuster to obsoletes and conflicts (Not sure this is -# right. If it obsoletes, why conflict ? Have to check it later) -# - Summary changed: Stefan, please check and aprove it -# - Changes description to use the new name -# - Sed string was NOT changed. Have to wait to the manpage to -# change first -# - Keeping the user junkbuster for now. It will require some aditional -# changes on the script (scheduled for the next specfile release) -# - Added post entry to move the old logfile to the new log directory -# - Removing "chkconfig --add" entry (not good to have it automaticaly -# added to the startup list). -# - Added preun section to stop the service with the old name, as well -# as remove it from the startup list -# - Removed the chkconfig --del entry from the conditional block on -# the preun scriptlet (now handled on the %files section) -# - junkbuster.init: renamed to junkbusterng.init -# - junkbusterng.init: -# - Changed JB_BIN to jbng -# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to -# be used where necessary (config dir) -# -# Aditional notes: -# - The config directory is /etc/junkbuster yet. Have to change it on the -# specfile, after it is changes on the code -# - The only files that got renamed on the cvs tree were the rh specfile and -# the init file. Some file references got changes on the makefile and on the -# rh-spec (as listed above) -# -# Revision 1.18 2002/03/21 23:00:00 swa -# want to autogenerate stuff. -# -# Revision 1.17 2002/03/19 19:30:04 morcego -# - Fixing stylesheet checking on configure. If it is found, no further checks -# should be done -# -# - configure will now check for db2html or docbook2html (should work now -# on SuSe without the docbktls package) -# -# Revision 1.16 2002/03/14 22:32:32 hal9 -# Bumped the RPM version. -# -# Revision 1.15 2002/03/08 20:00:28 swa -# some leftovers. -# -# Revision 1.14 2002/03/07 18:25:56 swa -# synced redhat and suse build process -# -# Revision 1.13 2002/03/07 17:17:56 oes -# (Hopefully) fixed for older make versions -# -# Revision 1.12 2002/03/07 15:28:27 swa -# more informative -# -# Revision 1.11 2002/03/06 14:33:18 sarantis -# Use proper temp file, not "abc". -# -# Revision 1.10 2002/03/06 14:19:35 sarantis -# Cleanup PID_FILE_PATH from redhat-dist target -# -# Revision 1.9 2002/03/05 17:31:11 morcego -# Search for docbook.dsl. Should solve portability problems for SuSe. -# -# Revision 1.8 2002/03/05 14:07:42 morcego -# configure now detects rpm topdir, and change GNUmakefile acordingly -# (based on sugestion by Sarantis Paskalis) -# -# Revision 1.7 2002/03/05 13:43:28 morcego -# Checking for text browser, so redhat-dok can work. -# -# Revision 1.6 2002/03/05 13:10:51 morcego -# Changes to implement redhat-dok (Hal Burgiss) -# Changes to make it work on other distros and out-of-the-shelf configurations -# -# Revision 1.5 2002/02/27 15:30:39 hal9 -# Reset $(RPM_PACKAGEV) to 1 (was 2) -# -# Revision 1.4 2002/01/17 21:44:04 jongfoster -# Adding urlmatch.[ch] -# -# Revision 1.3 2002/01/04 15:26:08 oes -# Added tarball-src target -# -# Revision 1.2 2001/12/30 14:07:31 steudten -# - Add signal handling (unix) -# - Add SIGHUP handler (unix) -# - Add creation of pidfile (unix) -# - Add action 'top' in rc file (RH) -# - Add entry 'SIGNALS' to manpage -# - Add exit message to logfile (unix) -# -# Revision 1.1 2001/12/01 11:22:57 jongfoster -# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of -# make break in a more obvious way. -# Adding .PHONY section. -# -# Revision 1.40 2001/12/01 00:24:11 jongfoster -# Renaming various config files -# Fixing CR->CRLF under Win32 (I hope) -# -# Revision 1.39 2001/11/06 12:07:30 steudten -# Add --clean for building rpm in target redhat-dist. -# -# Revision 1.38 2001/11/05 21:35:23 steudten -# Complete rewrite for the 'redhat-dist' target. -# Checks for writeable RPM build directories for calling user. -# So you must not be root, just set the modes to 1777 to -# build a RH package. -# Fix the upload-target to be arch independant. -# Add target for 'solaris-dist' - coming soon. -# -# Revision 1.37 2001/11/01 00:52:04 hal9 -# Redhat-upload stuff per Stefan. -# -# Revision 1.36 2001/10/31 19:26:13 swa -# automate process of uploading new releases -# to sf. -# -# Revision 1.35 2001/10/15 22:14:59 joergs -# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in -# the general CFLAGS already. -# -# Revision 1.34 2001/10/15 18:28:06 steudten -# remove config.cache for target clobber. -# Cleanup make dist for RH and S.u.S.E. -# -# Revision 1.33 2001/10/10 12:43:33 oes -# Added ugly hack to make install target work at least for some setups. -# -# Revision 1.32 2001/10/09 22:38:19 jongfoster -# Correcting actionsfile filename for Win32 INI build -# -# Revision 1.31 2001/09/23 10:13:48 swa -# upload process established. run make webserver and -# the documentation is moved to the webserver. documents -# are now linked correctly. -# -# Revision 1.30 2001/09/19 17:55:49 oes -# Fixed CFLAGS -# -# Revision 1.29 2001/09/16 17:34:27 jongfoster -# Removing showargs.[ch], adding cgi(simple|edit).[ch] -# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source -# of build problems. -# -# Revision 1.28 2001/09/13 15:19:08 swa -# we want text files as well. -# -# Revision 1.27 2001/09/13 13:11:37 steudten -# -# Replace DEBUG_CFLAGS with OTHER_CFLAGS -# -# Revision 1.26 2001/09/12 23:44:54 david__schmidt -# Mac OSX (Darwin) support added. -# -# Revision 1.25 2001/09/12 22:55:45 joergs -# AmigaOS support added. -# -# Revision 1.24 2001/09/12 17:28:59 david__schmidt -# -# OS/2 port: update autoconf'd support for the platform. -# -# Revision 1.23 2001/09/12 16:28:42 swa -# added "make dok" section to generate html pages from -# the sgml source documents. note that the we do not want -# generated stuff in cvs. -# -# Revision 1.22 2001/09/10 16:31:23 swa -# buildroot definition in the specfile fucks up the build -# process under suse. hence I moved it to the "rpm -ta" -# command -# -# Revision 1.21 2001/09/10 11:12:49 oes -# Turning on -Wall -# -# Revision 1.20 2001/08/02 22:04:29 jongfoster -# Removing some remaining references to obsolete w32rulesdlg.[ch] -# -# Revision 1.19 2001/07/30 22:14:03 jongfoster -# Removing obsolete w32rulesdlg.c and w32rulesdlg.h -# -# Revision 1.18 2001/07/29 17:09:17 jongfoster -# Major changes to build system in order to fix these bugs: -# - pthreads under Linux was broken - changed -lpthread to -pthread -# - Compiling in MinGW32 mode under CygWin now correctly detects -# which shared libraries are available -# - Solaris support (?) (Not tested under Solaris yet) -# -# Revision 1.17 2001/07/28 16:44:54 oes -# Fixed sed LF->CRLF conversion and removed deprecated files -# -# Revision 1.16 2001/07/15 19:45:33 jongfoster -# Added support for linking with POSIX threads library -# -# Revision 1.15 2001/07/13 13:48:07 oes -# - Moved STATIC #define for pcre to (ac)config.h -# - Made -Ipcre depandant on static pcre compilation to -# avoid version conflicts -# - Included compilation and depandancies for new deanimate.c -# - Made changes to the pcre/pcreposix/pcrs build process -# as required by the new library autodetection in -# configure.in -# -# Revision 1.14 2001/07/01 16:27:44 oes -# Fixed misplaced dependancy -# -# Revision 1.13 2001/06/29 13:18:36 oes -# - added depandancy of filters.o on cgi.h -# -# Revision 1.12 2001/06/12 17:15:56 swa -# fixes, because a clean build on rh6.1 was impossible. -# GZIP confuses make, %configure confuses rpm, etc. -# -# Revision 1.11 2001/06/11 11:26:35 sarantis -# RPM version should be the same as ijbswa version. The rpm release is -# specified in the specfile. -# -# Revision 1.10 2001/06/07 17:27:45 swa -# added suse build section -# -# Revision 1.9 2001/06/04 18:31:58 swa -# files are now prefixed with either `confdir' or `logdir'. -# `make redhat-dist' replaces both entries confdir and logdir -# with redhat values -# -# Revision 1.8 2001/06/04 10:44:57 swa -# `make redhatr-dist' now works. Except for the paths -# in the config file. -# -# Revision 1.7 2001/06/03 17:09:09 swa -# swa for oes: reversed my earlier change -# -# Revision 1.6 2001/06/03 17:07:27 swa -# swa for oes -# -# Revision 1.5 2001/06/03 13:57:26 swa -# compile cgi.c (for andreas' GUI) -# -# Revision 1.4 2001/05/31 21:18:45 jongfoster -# Added files actions.[ch], actionlist.h, list.[ch] to Makefile -# -# Revision 1.3 2001/05/29 20:02:48 joergs -# Changes for AmigaOS added. -# -# Revision 1.2 2001/05/17 22:23:23 oes -# - Added auto-generation of CRLFs for Win32 config files -# - Added comment-prefix to all Win32-only options in the config file -# and provided auto stripping of this prefix for the Win32 platform by make -# -# Revision 1.1.1.1 2001/05/15 13:59:00 oes -# Initial import of version 2.9.3 source tree -# -# diff --git a/external/privoxy/INSTALL b/external/privoxy/INSTALL deleted file mode 100644 index f17eadb..0000000 --- a/external/privoxy/INSTALL +++ /dev/null @@ -1,173 +0,0 @@ -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/INSTALL,v $ - * - * Purpose : INSTALL file to help with installing from source. - * - * Copyright : Written by and Copyright (C) 2001-2009 the - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - *********************************************************************/ - - -------------------------------------------------------------------------------- - -To build Privoxy from source, autoconf, GNU make (gmake), and, of course, a C -compiler like gcc are required. - -When building from a source tarball, first unpack the source: - - tar xzvf privoxy-3.0.12-stable-src.tar.gz - cd privoxy-3.0.12-stable - - -For retrieving the current CVS sources, you'll need a CVS client installed. -Note that sources from CVS are typically development quality, and may not be -stable, or well tested. To download CVS source, check the Sourceforge -documentation, which might give commands like: - - cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co current - cd current - - -This will create a directory named current/, which will contain the source -tree. - -You can also check out any Privoxy "branch", just exchange the current name -with the wanted branch name (Example: v_3_0_branch for the 3.0 cvs tree). - -It is also strongly recommended to not run Privoxy as root. You should -configure/install/run Privoxy as an unprivileged user, preferably by creating a -"privoxy" user and group just for this purpose. See your local documentation -for the correct command line to do add new users and groups (something like -adduser, but the command syntax may vary from platform to platform). - -/etc/passwd might then look like: - - privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell - - -And then /etc/group, like: - - privoxy:*:7777: - - -Some binary packages may do this for you. - -Then, to build from either unpacked tarball or CVS source: - - autoheader - autoconf - ./configure # (--help to see options) - make # (the make from GNU, sometimes called gmake) - su # Possibly required - make -n install # (to see where all the files will go) - make -s install # (to really install, -s to silence output) - - -Using GNU make, you can have the first four steps automatically done for you by -just typing: - - make - - -in the freshly downloaded or unpacked source directory. - -To build an executable with security enhanced features so that users cannot -easily bypass the proxy (e.g. "Go There Anyway"), or alter their own -configurations, configure like this: - - ./configure --disable-toggle --disable-editor --disable-force - - -Then build as above. In Privoxy 3.0.7 and later, all of these options can also -be disabled through the configuration file. - -WARNING: If installing as root, the install will fail unless a non-root user or -group is specified, or a privoxy user and group already exist on the system. If -a non-root user is specified, and no group, then the installation will try to -also use a group of the same name as "user". If a group is specified (and no -user), then the support files will be installed as writable by that group, and -owned by the user running the installation. - -configure accepts --with-user and --with-group options for setting user and -group ownership of the configuration files (which need to be writable by the -daemon). The specified user must already exist. When starting Privoxy, it must -be run as this same user to insure write access to configuration and log files! - -Alternately, you can specify user and group on the make command line, but be -sure both already exist: - - make -s install USER=privoxy GROUP=privoxy - - -The default installation path for make install is /usr/local. This may of -course be customized with the various ./configure path options. If you are -doing an install to anywhere besides /usr/local, be sure to set the appropriate -paths with the correct configure options (./configure --help). Non-privileged -users must of course have write access permissions to wherever the target -installation is going. - -If you do install to /usr/local, the install will use sysconfdir=$prefix/etc/ -privoxy by default. All other destinations, and the direct usage of ---sysconfdir flag behave like normal, i.e. will not add the extra privoxy -directory. This is for a safer install, as there may already exist another -program that uses a file with the "config" name, and thus makes /usr/local/etc -cleaner. - -If installing to /usr/local, the documentation will go by default to $prefix/ -share/doc. But if this directory doesn't exist, it will then try $prefix/doc -and install there before creating a new $prefix/share/doc just for Privoxy. - -Again, if the installs goes to /usr/local, the localstatedir (ie: var/) will -default to /var instead of $prefix/var so the logs will go to /var/log/privoxy -/, and the pid file will be created in /var/run/privoxy.pid. - -make install will attempt to set the correct values in config (main -configuration file). You should check this to make sure all values are correct. -If appropriate, an init script will be installed, but it is up to the user to -determine how and where to start Privoxy. The init script should be checked for -correct paths and values, if anything other than a default install is done. - -If install finds previous versions of local configuration files, most of these -will not be overwritten, and the new ones will be installed with a "new" -extension. default.action and default.filter will be overwritten. You will then -need to manually update the other installed configuration files as needed. The -default template files will be overwritten. If you have customized, local -templates, these should be stored safely in a separate directory and defined in -config by the "templdir" directive. It is of course wise to always back-up any -important configuration files "just in case". If a previous version of Privoxy -is already running, you will have to restart it manually. - -For more detailed instructions on how to build Redhat RPMs, Windows -self-extracting installers, building on platforms with special requirements -etc, please consult the developer manual. - -The simplest command line to start Privoxy is $path/privoxy --user=privoxy -$path/etc/privoxy/config. See privoxy --usage, or the man page, for other -options, and configuration. - diff --git a/external/privoxy/LICENSE b/external/privoxy/LICENSE deleted file mode 100644 index d511905..0000000 --- a/external/privoxy/LICENSE +++ /dev/null @@ -1,339 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc., - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. diff --git a/external/privoxy/Makefile b/external/privoxy/Makefile deleted file mode 100644 index ed6d7ac..0000000 --- a/external/privoxy/Makefile +++ /dev/null @@ -1,108 +0,0 @@ -# $Id: Makefile,v 1.11 2006/07/18 14:48:45 david__schmidt Exp $ -# -# Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# $Log: Makefile,v $ -# Revision 1.11 2006/07/18 14:48:45 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.5.2.2 2002/10/25 02:44:23 hal9 -# Port of make install, etc from main trunk. Needs testing! Add Slackware -# support, and other related changes. Update related docs. -# -# Revision 1.5.2.1 2002/08/05 17:46:13 oes -# Change make to gmake to fix auto-build on Solaris -# -# Revision 1.5 2002/04/11 12:51:34 oes -# Bugfix -# -# Revision 1.4 2002/04/09 16:38:10 oes -# Added option to run the whole build process -# -# Revision 1.3 2002/03/26 22:29:54 swa -# we have a new homepage! -# -# Revision 1.2 2002/03/24 13:25:42 swa -# name change related issues -# -# Revision 1.1 2001/12/01 11:24:29 jongfoster -# Will display a warning if non-GNU make is used -# -# - -############################################################################# - -GNU_MAKE_CMD = gmake -MAKE_CMD = make - -error: - @if [ -f GNUmakefile ]; then \ - echo "***"; \ - echo "*** You are not using the GNU version of Make - maybe it's called gmake"; \ - echo "*** or it's in a different PATH? Please read INSTALL." ; \ - echo "***"; \ - exit 1; \ - elif test -n "$(HOST_ARCH)" && test -z "$(MAKE_VERSION)" ; then \ - echo "***"; \ - echo "*** You are not using GNU Make on Solaris, please make sure you do" ; \ - echo "*** and re-run 'make' "; \ - echo "***"; \ - exit 1 ; \ - elif test -n "$(MACHINE_ARCH)" && test -z "$(MAKE_VERSION)" ; then \ - echo "***"; \ - echo "*** You are not using GNU Make on FreeBSD, please make sure you do" ; \ - echo "*** and re-run 'make' "; \ - echo "***"; \ - exit 1 ; \ - else \ - echo "***"; \ - echo "*** To build this program, you must run"; \ - echo "*** autoheader && autoconf && ./configure and then run GNU make."; \ - echo "***"; \ - echo -n "*** Shall I do this for you now? (y/n) "; \ - read answer; \ - if [ "$$answer" = "y" ]; then \ - autoheader && autoconf && ./configure || exit 1; \ - if $(GNU_MAKE_CMD) -v |grep GNU >/dev/null 2>/dev/null; then \ - $(GNU_MAKE_CMD) ;\ - elif $(MAKE_CMD) -v |grep GNU >/dev/null 2>/dev/null; then \ - $(MAKE_CMD) ;\ - else \ - echo "Neither 'make' nor 'gmake' are GNU compatible!" ; \ - echo "Please read INSTALL." ; \ - exit 1 ; \ - fi ;\ - fi; \ - fi - -.PHONY: error - -############################################################################# - -## Local Variables: -## tab-width: 3 -## end: diff --git a/external/privoxy/README b/external/privoxy/README deleted file mode 100644 index a145e81..0000000 --- a/external/privoxy/README +++ /dev/null @@ -1,280 +0,0 @@ -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/README,v $ - * - * Purpose : README file to give a short intro. - * - * Copyright : Written by and Copyright (C) 2001-2009 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - *********************************************************************/ - -This README is included with Privoxy 3.0.12. See http://www.privoxy.org/ for -more information. The current code maturity level is "stable". - -------------------------------------------------------------------------------- - -Privoxy is a non-caching web proxy with advanced filtering capabilities for -enhancing privacy, modifying web page data and HTTP headers, controlling -access, and removing ads and other obnoxious Internet junk. Privoxy has a -flexible configuration and can be customized to suit individual needs and -tastes. It has application for both stand-alone systems and multi-user -networks. - -Privoxy is Free Software and licensed under the GPL2. - -Privoxy is an associated project of Software in the Public Interest (SPI). -Donations are welcome. - -------------------------------------------------------------------------------- - -1. IMPORTANT CHANGES - -March 2009, Privoxy 3.0.12 is released. - -This is primarily a bug fix release. See the "ChangeLog", and the "What's New" -section and the "Upgrader's Notes" in the User Manual for details. - -February 2009, Privoxy 3.0.11 is released. - -As usual there are changes that effect the configuration. See the "ChangeLog", -and the "What's New" section and the "Upgrader's Notes" in the User Manual for -details and specifics. - -This is a stable release, and marks a departure for Privoxy development. - -Previously, odd numbered releases were considered beta versions and were only -released at the end of the development cycle when the code was already believed -to be stable. Usually it was, so the stable release contained pretty much the -same code, but got a higher version number. In the future we intend to release -several snapshots between stable releases. There will probably still be about -two stable releases per year, but hopefully about six snapshots instead of the -two betas we have now. The intentions is to make testing without CVS access -easier. - -------------------------------------------------------------------------------- - -2. INSTALL - -See the INSTALL file in this directory, for installing from raw source, and the -User Manual, for all other installation types. - -------------------------------------------------------------------------------- - -3. RUN - -privoxy [--help] [--version] [--no-daemon] [--pidfile PIDFILE] [--user USER -[.GROUP]] [--chroot] [--pre-chroot-nslookup HOSTNAME ][config_file] - -See the man page or User Manual for an explanation of each option, and other -configuration and usage issues. - -If no config_file is specified on the command line, Privoxy will look for a -file named 'config' in the current directory (except Win32 which will look for -'config.txt'). If no config_file is found, Privoxy will fail to start. - -Or for Red Hat and Fedora based distributions: /etc/rc.d/init.d/privoxy start - -Or Debian and Ubuntu: /etc/init.d/privoxy start - -------------------------------------------------------------------------------- - -4. CONFIGURATION - -See: 'config', 'default.action', 'user.action', 'default.filter', and -'user.filter'. 'user.action' and 'user.filter' are for personal and local -configuration preferences. These are all well commented. Most of the magic is -in '*.action' files. 'user.action' should be used for any actions -customizations. On Unix-like systems, these files are typically installed in / -etc/privoxy. On Windows, then wherever the executable itself is installed. -There are many significant changes and advances from earlier versions. The User -Manual has an explanation of all configuration options, and examples: http:// -www.privoxy.org/user-manual/. - -Be sure to set your browser(s) for HTTP/HTTPS Proxy at <IP>:<Port>, or whatever -you specify in the config file under 'listen-address'. DEFAULT is -localhost:8118. Note that Privoxy ONLY proxies HTTP (and HTTPS) traffic. Do not -try it with FTP or other protocols for the simple reason it does not work. - -The actions list can be configured via the web interface accessed via http:// -p.p/, as well other options. - -------------------------------------------------------------------------------- - -5. DOCUMENTATION - -There should be documentation in the 'doc' subdirectory. In particular, see the -User Manual there, the FAQ, and those interested in Privoxy development, should -look at developer-manual. - -The source and configuration files are all well commented. The main -configuration files are: 'config', 'default.action', and 'default.filter'. - -Included documentation may vary according to platform and packager. All -documentation is posted on http://www.privoxy.org, in case you don't have it, -or can't find it. - -------------------------------------------------------------------------------- - -6. CONTACTING THE DEVELOPERS, BUG REPORTING AND FEATURE REQUESTS - -We value your feedback. In fact, we rely on it to improve Privoxy and its -configuration. However, please note the following hints, so we can provide you -with the best support: - -------------------------------------------------------------------------------- - -6.1. Get Support - -For casual users, our support forum at SourceForge is probably best suited: -http://sourceforge.net/tracker/?group_id=11118&atid=211118 - -All users are of course welcome to discuss their issues on the users mailing -list, where the developers also hang around. - -Please don't sent private support requests to individual Privoxy developers, -either use the mailing lists or the support trackers. - -Note that the Privoxy mailing lists are moderated. Posts from unsubscribed -addresses have to be accepted manually by a moderator. This may cause a delay -of several days and if you use a subject that doesn't clearly mention Privoxy -or one of its features, your message may be accidentally discarded as spam. - -If you aren't subscribed, you should therefore spend a few seconds to come up -with a proper subject. Additionally you should make it clear that you want to -get CC'd. Otherwise some responses will be directed to the mailing list only, -and you won't see them. - -------------------------------------------------------------------------------- - -6.2. Reporting Problems - -"Problems" for our purposes, come in two forms: - - * Configuration issues, such as ads that slip through, or sites that don't - function properly due to one Privoxy "action" or another being turned "on". - - * "Bugs" in the programming code that makes up Privoxy, such as that might - cause a crash. - -------------------------------------------------------------------------------- - -6.2.1. Reporting Ads or Other Configuration Problems - -Please send feedback on ads that slipped through, innocent images that were -blocked, sites that don't work properly, and other configuration related -problem of default.action file, to http://sourceforge.net/tracker/?group_id= -11118&atid=460288, the Actions File Tracker. - -New, improved default.action files may occasionally be made available based on -your feedback. These will be announced on the ijbswa-announce list and -available from our the files section of our project page. - -------------------------------------------------------------------------------- - -6.2.2. Reporting Bugs - -Please report all bugs through our bug tracker: http://sourceforge.net/tracker -/?group_id=11118&atid=111118. - -Before doing so, please make sure that the bug has not already been submitted -and observe the additional hints at the top of the submit form. If already -submitted, please feel free to add any info to the original report that might -help to solve the issue. - -Please try to verify that it is a Privoxy bug, and not a browser or site bug or -documented behaviour that just happens to be different than what you expected. -If unsure, try toggling off Privoxy, and see if the problem persists. - -If you are using your own custom configuration, please try the stock configs to -see if the problem is configuration related. If you're having problems with a -feature that is disabled by default, please ask around on the mailing list if -others can reproduce the problem. - -If you aren't using the latest Privoxy version, the bug may have been found and -fixed in the meantime. We would appreciate if you could take the time to -upgrade to the latest version (or even the latest CVS snapshot) and verify that -your bug still exists. - -Please be sure to provide the following information: - - * The exact Privoxy version you are using (if you got the source from CVS, - please also provide the source code revisions as shown in http:// - config.privoxy.org/show-version) - - * The operating system and versions you run Privoxy on, (e.g. Windows XP - SP2), if you are using a Unix flavor, sending the output of "uname -a" - should do, in case of GNU/Linux, please also name the distribution. - - * The name, platform, and version of the browser you were using (e.g. - Internet Explorer v5.5 for Mac). - - * The URL where the problem occurred, or some way for us to duplicate the - problem (e.g. http://somesite.example.com/?somethingelse=123) - - * Whether your version of Privoxy is one supplied by the Privoxy developers - via SourceForge, or if you got your copy somewhere else. - - * Whether you are using Privoxy in tandem with another proxy such as Tor. If - so, please temporary disable the other proxy to see if the symptoms change. - - * Whether you are using a personal firewall product. If so, does Privoxy work - without it? - - * Any other pertinent information to help identify the problem such as config - or log file excerpts (yes, you should have log file entries for each action - taken). - -You don't have to tell us your actual name when filing a problem report, but -please use a nickname so we can differentiate between your messages and the -ones entered by other "anonymous" users that may respond to your request if -they have the same problem or already found a solution. - -Please also check the status of your request a few days after submitting it, as -we may request additional information. If you use a SF id, you should -automatically get a mail when someone responds to your request. - -The appendix of the Privoxy User Manual also has helpful information on -understanding actions, and action debugging. - -------------------------------------------------------------------------------- - -6.3. Request New Features - -You are welcome to submit ideas on new features or other proposals for -improvement through our feature request tracker at http://sourceforge.net/ -tracker/?atid=361118&group_id=11118. - -------------------------------------------------------------------------------- - -6.4. Other - -For any other issues, feel free to use the mailing lists. Technically -interested users and people who wish to contribute to the project are also -welcome on the developers list! You can find an overview of all Privoxy-related -mailing lists, including list archives, at: http://sourceforge.net/mail/? -group_id=11118. - diff --git a/external/privoxy/acconfig.h b/external/privoxy/acconfig.h deleted file mode 100644 index ea2792d..0000000 --- a/external/privoxy/acconfig.h +++ /dev/null @@ -1,495 +0,0 @@ -#ifndef CONFIG_H_INCLUDED -#define CONFIG_H_INCLUDED -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/acconfig.h,v $ - * - * Purpose : This file should be the first thing included in every - * .c file. (Before even system headers). It contains - * #define statements for various features. It was - * introduced because the compile command line started - * getting ludicrously long with feature defines. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: acconfig.h,v $ - * Revision 1.36 2008/10/18 11:17:52 fabiankeil - * Connection keep-alive support is ready for testing, - * allow enabling it through the configure script. - * - * Revision 1.35 2008/04/06 15:18:33 fabiankeil - * Oh well, rename the --enable-pcre-host-patterns option to - * --enable-extended-host-patterns as it's not really PCRE syntax. - * - * Revision 1.34 2008/04/06 14:54:26 fabiankeil - * Use PCRE syntax in host patterns when configured - * with --enable-pcre-host-patterns. - * - * Revision 1.33 2006/12/17 19:15:26 fabiankeil - * Added ./configure switch for FEATURE_GRACEFUL_TERMINATION. - * - * Revision 1.32 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.27.2.4 2003/12/17 16:34:40 oes - * Cosmetics - * - * Revision 1.27.2.3 2003/03/27 16:03:19 oes - * Another shot at Bug #707467 - * - * Revision 1.27.2.2 2003/03/21 14:39:12 oes - * Presumably fixed Bug #707467 by defining unix ifdef __unix__ - * - * Revision 1.27.2.1 2002/08/10 11:22:31 oes - * - Add two AC_DEFINEs that indicate if the pcre*.h headers - * are located in a pcre/ subdir to the include path. - * - * Revision 1.27 2002/04/25 19:13:57 morcego - * Removed RPM release number declaration on configure.in - * Changed makefile to use given value for RPM_PACKAGEV when on uploading - * targets (will produce an error, explaining who to do it, if no value - * if provided). - * - * Revision 1.26 2002/04/11 11:00:21 oes - * Applied Moritz' fix for socklen_t on Solaris - * - * Revision 1.25 2002/04/06 20:38:01 jongfoster - * Renaming VC++ versions of config.h - * - * Revision 1.24 2002/04/04 00:36:36 gliptak - * always use pcre for matching - * - * Revision 1.23 2002/04/03 22:28:03 gliptak - * Removed references to gnu_regex - * - * Revision 1.22 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.21 2002/03/24 14:31:08 swa - * remove more crappy files. set RPM - * release version correctly. - * - * Revision 1.20 2002/03/24 13:46:44 swa - * name change related issue. - * - * Revision 1.19 2002/03/24 13:25:42 swa - * name change related issues - * - * Revision 1.18 2002/03/08 16:40:28 oes - * Added FEATURE_NO_GIFS - * - * Revision 1.17 2002/03/04 17:52:44 oes - * Deleted PID_FILE_PATH - * - * Revision 1.16 2002/01/10 12:36:18 oes - * Moved HAVE_*_R to acconfig.h, where they belong. - * - * Revision 1.15 2001/12/30 14:07:31 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.14 2001/10/23 21:24:09 jongfoster - * Support for FEATURE_CGI_EDIT_ACTIONS - * - * Revision 1.13 2001/10/07 15:30:41 oes - * Removed FEATURE_DENY_GZIP - * - * Revision 1.12 2001/09/13 19:56:37 jongfoster - * Reverting to revision 1.10 - previous checking was majorly broken. - * - * Revision 1.10 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.9 2001/07/29 19:08:52 jongfoster - * Changing _CONFIG_H to CONFIG_H_INCLUDED. - * Also added protection against using a MinGW32 or CygWin version of - * config.h from within MS Visual C++ - * - * Revision 1.8 2001/07/29 17:09:17 jongfoster - * Major changes to build system in order to fix these bugs: - * - pthreads under Linux was broken - changed -lpthread to -pthread - * - Compiling in MinGW32 mode under CygWin now correctly detects - * which shared libraries are available - * - Solaris support (?) (Not tested under Solaris yet) - * - * Revision 1.7 2001/07/25 22:53:59 jongfoster - * Will #error if pthreads is enabled under BeOs - * - * Revision 1.6 2001/07/15 17:54:29 jongfoster - * Renaming #define STATIC to STATIC_PCRE - * Adding new #define FEATURE_PTHREAD that will be used to enable - * POSIX threads support. - * - * Revision 1.5 2001/07/13 13:48:37 oes - * - (Fix:) Copied CODE_STATUS #define from config.h.in - * - split REGEX #define into REGEX_GNU and REGEX_PCRE - * and removed PCRE. - * (REGEX = REGEX_GNU || REGEX_PCRE per project.h) - * - Moved STATIC (for pcre) here from Makefile.in - * - Introduced STATIC_PCRS #define to allow for dynaimc linking with - * libpcrs - * - Removed PCRS #define, since pcrs is now needed for CGI anyway - * - * Revision 1.4 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.3 2001/05/26 01:26:34 jongfoster - * New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor. - * This #define cannot be set from ./configure - there's no point, it - * doesn't work yet. See feature request # 425722 - * - * Revision 1.2 2001/05/22 17:43:35 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Many minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.1.1.1 2001/05/15 13:58:45 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - -@TOP@ - -/* - * Version number - Major (X._._) - */ -#undef VERSION_MAJOR - -/* - * Version number - Minor (_.X._) - */ -#undef VERSION_MINOR - -/* - * Version number - Point (_._.X) - */ -#undef VERSION_POINT - -/* - * Version number, as a string - */ -#undef VERSION - -/* - * Status of the code: "alpha", "beta" or "stable". - */ -#undef CODE_STATUS - -/* - * Should pcre be statically built in instead of linkling with libpcre? - * (This is determined by configure depending on the availiability of - * libpcre and user preferences). The name is ugly, but pcre needs it. - * Don't bother to change this here! Use configure instead. - */ -#undef STATIC_PCRE - -/* - * Should pcrs be statically built in instead of linkling with libpcrs? - * (This is determined by configure depending on the availiability of - * libpcrs and user preferences). - * Don't bother to change this here! Use configure instead. - */ -#undef STATIC_PCRS - -/* - * Allows the use of an ACL to control access to the proxy by IP address. - */ -#undef FEATURE_ACL - -/* - * Enables the web-based configuration (actionsfile) editor. If you - * have a shared proxy, you might want to turn this off. - */ -#undef FEATURE_CGI_EDIT_ACTIONS - -/* - * Allows the use of jar files to capture cookies. - */ -#undef FEATURE_COOKIE_JAR - -/* - * Locally redirect remote script-redirect URLs - */ -#undef FEATURE_FAST_REDIRECTS - -/* - * Bypass filtering for 1 page only - */ -#undef FEATURE_FORCE_LOAD - -/* - * Allow blocking using images as well as HTML. - * If you do not define this then everything is blocked as HTML. - * - * Note that this is required if you want to use FEATURE_IMAGE_DETECT_MSIE. - */ -#undef FEATURE_IMAGE_BLOCKING - -/* - * Detect image requests automatically for MSIE. Will fall back to - * other image-detection methods (i.e. "+image" permission) for other - * browsers. - * - * You must also define FEATURE_IMAGE_BLOCKING to use this feature. - * - * It detects the following header pair as an image request: - * - * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0) - * Accept: * / * - * - * And the following as a HTML request: - * - * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0) - * Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, * / * - * - * And no, I haven't got that backwards - IE is being wierd. - * - * Known limitations: - * 1) If you press shift-reload on a blocked HTML page, you get - * the image "blocked" page, not the HTML "blocked" page. - * 2) Once an image "blocked" page has been sent, viewing it - * in it's own browser window *should* bring up the HTML - * "blocked" page, but it doesn't. You need to clear the - * browser cache to get the HTML version again. - * - * These limitations are due to IE making inconsistent choices - * about which "Accept:" header to send. - */ -#undef FEATURE_IMAGE_DETECT_MSIE - -/* - * Kills JavaScript popups - window.open, onunload, etc. - */ -#undef FEATURE_KILL_POPUPS - -/* - * Use PNG instead of GIF for built-in images - */ -#undef FEATURE_NO_GIFS - -/* - * Allow to shutdown Privoxy through the webinterface. - */ -#undef FEATURE_GRACEFUL_TERMINATION - -/* - * Allow PCRE syntax in host patterns. - */ -#undef FEATURE_EXTENDED_HOST_PATTERNS - -/* - * Keep outgoing connections alive if possible. - */ -#undef FEATURE_CONNECTION_KEEP_ALIVE - -/* - * Use POSIX threads instead of native threads. - */ -#undef FEATURE_PTHREAD - -/* - * Enables statistics function. - */ -#undef FEATURE_STATISTICS - -/* - * Allow Privoxy to be "disabled" so it is just a normal non-blocking - * non-anonymizing proxy. This is useful if you're trying to access a - * blocked or broken site - just change the setting in the config file, - * or use the handy "Disable" menu option in the Windows GUI. - */ -#undef FEATURE_TOGGLE - -/* - * Allows the use of trust files. - */ -#undef FEATURE_TRUST - -/* - * Defined on Solaris only. Makes the system libraries thread safe. - */ -#undef _REENTRANT - -/* - * Defined on Solaris only. Without this, many important functions are not - * defined in the system headers. - */ -#undef __EXTENSIONS__ - -/* - * Defined always. - * FIXME: Don't know what it does or why we need it. - * (presumably something to do with MultiThreading?) - */ -#undef __MT__ - -/* If the (nonstandard and thread-safe) function gethostbyname_r - * is available, select which signature to use - */ -#undef HAVE_GETHOSTBYNAME_R_6_ARGS -#undef HAVE_GETHOSTBYNAME_R_5_ARGS -#undef HAVE_GETHOSTBYNAME_R_3_ARGS - -/* If the (nonstandard and thread-safe) function gethostbyaddr_r - * is available, select which signature to use - */ -#undef HAVE_GETHOSTBYADDR_R_8_ARGS -#undef HAVE_GETHOSTBYADDR_R_7_ARGS -#undef HAVE_GETHOSTBYADDR_R_5_ARGS - -/* Defined if you have gmtime_r and localtime_r with a signature - * of (struct time *, struct tm *) - */ -#undef HAVE_GMTIME_R -#undef HAVE_LOCALTIME_R - -/* Define to 'int' if <sys/socket.h> doesn't have it. - */ -#undef socklen_t - -/* Define if pcre.h must be included as <pcre/pcre.h> - */ -#undef PCRE_H_IN_SUBDIR - -/* Define if pcreposix.h must be included as <pcre/pcreposix.h> - */ -#undef PCREPOSIX_H_IN_SUBDIR - -@BOTTOM@ - -/* - * Defined always. - * FIXME: Don't know what it does or why we need it. - * (presumably something to do with ANSI Standard C?) - */ -#ifndef __STDC__ -#define __STDC__ 1 -#endif /* ndef __STDC__ */ - -/* - * Need to set up this define only for the Pthreads library for - * Win32, available from http://sources.redhat.com/pthreads-win32/ - */ -#if defined(FEATURE_PTHREAD) && defined(_WIN32) -#define __CLEANUP_C -#endif /* defined(FEATURE_PTHREAD) && defined(_WIN32) */ - -/* - * BEOS does not currently support POSIX threads. - * This *should* be detected by ./configure, but let's be sure. - */ -#if defined(FEATURE_PTHREAD) && defined(__BEOS__) -#error BEOS does not support pthread - please run ./configure again with "--disable-pthread" - -#endif /* defined(FEATURE_PTHREAD) && defined(__BEOS__) */ - -/* - * On OpenBSD and maybe also FreeBSD, gcc doesn't define the cpp - * symbol unix; it defines __unix__ and sometimes not even that: - */ -#if ( defined(__unix__) || defined(__NetBSD__) ) && !defined(unix) -#define unix 1 -#endif - -/* - * It's too easy to accidentally use a Cygwin or MinGW32 version of config.h - * under VC++, and it usually gives many wierd error messages. Let's make - * the error messages understandable, by bailing out now. - */ -#ifdef _MSC_VER -#error For MS VC++, please use vc_config_winthreads.h or vc_config_pthreads.h. You can usually do this by selecting the "Build", "Clean" menu option. -#endif /* def _MSC_VER */ - -#endif /* CONFIG_H_INCLUDED */ diff --git a/external/privoxy/actionlist.h b/external/privoxy/actionlist.h deleted file mode 100644 index 339c878..0000000 --- a/external/privoxy/actionlist.h +++ /dev/null @@ -1,306 +0,0 @@ -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/actionlist.h,v $ - * - * Purpose : Master list of supported actions. - * Not really a header, since it generates code. - * This is included (3 times!) from actions.c - * Each time, the following macros are defined to - * suitable values beforehand: - * DEFINE_ACTION_MULTI() - * DEFINE_ACTION_STRING() - * DEFINE_ACTION_BOOL() - * DEFINE_ACTION_ALIAS - * - * Copyright : Written by and Copyright (C) 2001-2008 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: actionlist.h,v $ - * Revision 1.36 2008/09/20 10:04:33 fabiankeil - * Remove hide-forwarded-for-headers action which has - * been obsoleted by change-x-forwarded-for{block}. - * - * Revision 1.35 2008/09/19 15:43:54 fabiankeil - * Fix sorting. - * - * Revision 1.34 2008/09/19 15:26:28 fabiankeil - * Add change-x-forwarded-for{} action to block or add - * X-Forwarded-For headers. Mostly based on code removed - * before 3.0.7. - * - * Revision 1.33 2008/03/29 12:13:45 fabiankeil - * Remove send-wafer and send-vanilla-wafer actions. - * - * Revision 1.32 2008/03/28 15:13:42 fabiankeil - * Remove inspect-jpegs action. - * - * Revision 1.31 2008/03/27 18:27:20 fabiankeil - * Remove kill-popups action. - * - * Revision 1.30 2008/03/04 18:30:34 fabiankeil - * Remove the treat-forbidden-connects-like-blocks action. We now - * use the "blocked" page for forbidden CONNECT requests by default. - * - * Revision 1.29 2008/03/01 14:00:43 fabiankeil - * Let the block action take the reason for the block - * as argument and show it on the "blocked" page. - * - * Revision 1.28 2007/12/11 21:08:29 fabiankeil - * Let the CGI editor suggest a forward-override - * parameter whose syntax is actually valid. - * - * Revision 1.27 2007/11/10 15:04:08 fabiankeil - * Tell the CGI editor about +hide-referrer{conditional-forge}. - * - * Revision 1.26 2007/06/01 16:54:28 fabiankeil - * Add forward-override{} to change the forwarding settings through - * action sections. This is mainly interesting to forward different - * clients differently (for example based on User-Agent or request - * origin). - * - * Revision 1.25 2007/04/15 16:39:20 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.24 2007/03/20 15:16:34 fabiankeil - * Use dedicated header filter actions instead of abusing "filter". - * Replace "filter-client-headers" and "filter-client-headers" - * with "server-header-filter" and "client-header-filter". - * - * Revision 1.23 2006/10/09 10:26:18 fabiankeil - * Changed the path in set-image-blocker's redirection default to - * "send-banner?type=pattern" instead of "show-banner?type=pattern" - * which isn't caught by Privoxy. Fixes BR 1573468. - * - * Changed hide-user-agent's default value to "Privoxy VERSION". - * - * Changed hide-referrer's default fake value to "http://www.privoxy.org/". - * A static referrer is obviously fake anyway, so we might as well - * advertise ourselves. - * - * Revision 1.22 2006/09/01 17:14:18 hal9 - * Re-ordered the actions list so that they display in the actions editor in - * alphabetical order. Some of the new actions were "out of order". - * - * Revision 1.21 2006/08/14 08:25:19 fabiankeil - * Split filter-headers{} into filter-client-headers{} - * and filter-server-headers{}. - * Added parse_header_time() to share some code. - * Replaced timegm() with mktime(). - * - * Revision 1.20 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.19 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.17.2.3 2004/10/03 12:53:32 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.17.2.2 2002/09/25 15:25:25 oes - * Added more aliases for prehistoric action names - * - * Revision 1.17.2.1 2002/08/02 12:50:47 oes - * Consistency with docs: Change default name for action from hide-referer to hide-referrer - * - * Revision 1.17 2002/05/14 21:25:55 oes - * Renamed prevent-(setting/reading)-cookies to crunch-(incoming/outgoing)-cookies - * - * Revision 1.16 2002/04/24 02:15:18 oes - * Renamed actions as discussed, Aliased old action names to new ones. - * - * Revision 1.15 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.14 2002/03/24 16:32:08 jongfoster - * Removing logo option - * - * Revision 1.13 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.12 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.11 2002/03/12 01:42:49 oes - * Introduced modular filters - * - * Revision 1.10 2002/03/08 18:19:14 jongfoster - * Adding +image-blocker{pattern} option to edit interface - * - * Revision 1.9 2001/11/22 21:58:41 jongfoster - * Adding action +no-cookies-keep - * - * Revision 1.8 2001/10/10 16:42:52 oes - * Fixed a bug, Added +limit-connect string action - * - * Revision 1.7 2001/10/07 15:33:59 oes - * Introduced a +no-compression action - * Introduced a +downgrade action - * - * Revision 1.6 2001/09/16 15:47:37 jongfoster - * First version of CGI-based edit interface. This is very much a - * work-in-progress, and you can't actually use it to edit anything - * yet. You must #define FEATURE_CGI_EDIT_ACTIONS for these changes - * to have any effect. - * - * Revision 1.5 2001/07/18 12:27:03 oes - * Changed deanimate-gifs to string action - * - * Revision 1.4 2001/07/13 13:52:12 oes - * - Formatting - * - Introduced new action ACTION_DEANIMATE - * - * Revision 1.3 2001/06/07 23:03:56 jongfoster - * Added standard comment at top of file. - * - * - *********************************************************************/ - - -#if !(defined(DEFINE_ACTION_BOOL) && defined(DEFINE_ACTION_MULTI) && defined(DEFINE_ACTION_STRING)) -#error Please define lots of macros before including "actionlist.h". -#endif /* !defined(all the DEFINE_ACTION_xxx macros) */ - -#ifndef DEFINE_CGI_PARAM_RADIO -#define DEFINE_CGI_PARAM_RADIO(name, bit, index, value, is_default) -#define DEFINE_CGI_PARAM_CUSTOM(name, bit, index, default_val) -#define DEFINE_CGI_PARAM_NO_RADIO(name, bit, index, default_val) -#endif /* ndef DEFINE_CGI_PARAM_RADIO */ - -DEFINE_ACTION_MULTI ("add-header", ACTION_MULTI_ADD_HEADER) -DEFINE_ACTION_STRING ("block", ACTION_BLOCK, ACTION_STRING_BLOCK) -DEFINE_CGI_PARAM_NO_RADIO("block", ACTION_BLOCK, ACTION_STRING_BLOCK, "No reason specified.") -DEFINE_ACTION_STRING ("change-x-forwarded-for", ACTION_CHANGE_X_FORWARDED_FOR, ACTION_STRING_CHANGE_X_FORWARDED_FOR) -DEFINE_CGI_PARAM_RADIO ("change-x-forwarded-for", ACTION_CHANGE_X_FORWARDED_FOR, ACTION_STRING_CHANGE_X_FORWARDED_FOR, "block", 0) -DEFINE_CGI_PARAM_RADIO ("change-x-forwarded-for", ACTION_CHANGE_X_FORWARDED_FOR, ACTION_STRING_CHANGE_X_FORWARDED_FOR, "add", 1) -DEFINE_ACTION_MULTI ("client-header-filter", ACTION_MULTI_CLIENT_HEADER_FILTER) -DEFINE_ACTION_MULTI ("client-header-tagger", ACTION_MULTI_CLIENT_HEADER_TAGGER) -DEFINE_ACTION_STRING ("content-type-overwrite", ACTION_CONTENT_TYPE_OVERWRITE, ACTION_STRING_CONTENT_TYPE) -DEFINE_CGI_PARAM_NO_RADIO("content-type-overwrite", ACTION_CONTENT_TYPE_OVERWRITE, ACTION_STRING_CONTENT_TYPE, "text/html") -DEFINE_ACTION_STRING ("crunch-client-header", ACTION_CRUNCH_CLIENT_HEADER, ACTION_STRING_CLIENT_HEADER) -DEFINE_CGI_PARAM_NO_RADIO("crunch-client-header", ACTION_CRUNCH_CLIENT_HEADER, ACTION_STRING_CLIENT_HEADER, "X-Whatever:") -DEFINE_ACTION_BOOL ("crunch-if-none-match", ACTION_CRUNCH_IF_NONE_MATCH) -DEFINE_ACTION_BOOL ("crunch-incoming-cookies", ACTION_NO_COOKIE_SET) -DEFINE_ACTION_BOOL ("crunch-outgoing-cookies", ACTION_NO_COOKIE_READ) -DEFINE_ACTION_STRING ("crunch-server-header", ACTION_CRUNCH_SERVER_HEADER, ACTION_STRING_SERVER_HEADER) -DEFINE_CGI_PARAM_NO_RADIO("crunch-server-header", ACTION_CRUNCH_SERVER_HEADER, ACTION_STRING_SERVER_HEADER, "X-Whatever:") -DEFINE_ACTION_STRING ("deanimate-gifs", ACTION_DEANIMATE, ACTION_STRING_DEANIMATE) -DEFINE_CGI_PARAM_RADIO ("deanimate-gifs", ACTION_DEANIMATE, ACTION_STRING_DEANIMATE, "first", 0) -DEFINE_CGI_PARAM_RADIO ("deanimate-gifs", ACTION_DEANIMATE, ACTION_STRING_DEANIMATE, "last", 1) -DEFINE_ACTION_BOOL ("downgrade-http-version", ACTION_DOWNGRADE) -DEFINE_ACTION_STRING ("fast-redirects", ACTION_FAST_REDIRECTS, ACTION_STRING_FAST_REDIRECTS) -DEFINE_CGI_PARAM_RADIO ("fast-redirects", ACTION_FAST_REDIRECTS, ACTION_STRING_FAST_REDIRECTS, "simple-check", 0) -DEFINE_CGI_PARAM_RADIO ("fast-redirects", ACTION_FAST_REDIRECTS, ACTION_STRING_FAST_REDIRECTS, "check-decoded-url", 1) -DEFINE_ACTION_MULTI ("filter", ACTION_MULTI_FILTER) -DEFINE_ACTION_BOOL ("force-text-mode", ACTION_FORCE_TEXT_MODE) -DEFINE_ACTION_STRING ("forward-override", ACTION_FORWARD_OVERRIDE, ACTION_STRING_FORWARD_OVERRIDE) -DEFINE_CGI_PARAM_CUSTOM ("forward-override", ACTION_FORWARD_OVERRIDE, ACTION_STRING_FORWARD_OVERRIDE, "forward .") -DEFINE_ACTION_BOOL ("handle-as-empty-document", ACTION_HANDLE_AS_EMPTY_DOCUMENT) -DEFINE_ACTION_BOOL ("handle-as-image", ACTION_IMAGE) -DEFINE_ACTION_STRING ("hide-accept-language", ACTION_HIDE_ACCEPT_LANGUAGE, ACTION_STRING_LANGUAGE) -DEFINE_CGI_PARAM_RADIO ("hide-accept-language", ACTION_HIDE_ACCEPT_LANGUAGE, ACTION_STRING_LANGUAGE, "block", 0) -DEFINE_CGI_PARAM_CUSTOM ("hide-accept-language", ACTION_HIDE_ACCEPT_LANGUAGE, ACTION_STRING_LANGUAGE, "de-de") -DEFINE_ACTION_STRING ("hide-content-disposition", ACTION_HIDE_CONTENT_DISPOSITION, ACTION_STRING_CONTENT_DISPOSITION) -DEFINE_CGI_PARAM_RADIO ("hide-content-disposition", ACTION_HIDE_CONTENT_DISPOSITION, ACTION_STRING_CONTENT_DISPOSITION, "block", 0) -DEFINE_CGI_PARAM_CUSTOM ("hide-content-disposition", ACTION_HIDE_CONTENT_DISPOSITION, ACTION_STRING_CONTENT_DISPOSITION, "attachment; filename=WHATEVER.txt") -DEFINE_ACTION_STRING ("hide-from-header", ACTION_HIDE_FROM, ACTION_STRING_FROM) -DEFINE_CGI_PARAM_RADIO ("hide-from-header", ACTION_HIDE_FROM, ACTION_STRING_FROM, "block", 1) -DEFINE_CGI_PARAM_CUSTOM ("hide-from-header", ACTION_HIDE_FROM, ACTION_STRING_FROM, "spam_me_senseless(a)sittingduck.xyz") -DEFINE_ACTION_STRING ("hide-if-modified-since", ACTION_HIDE_IF_MODIFIED_SINCE, ACTION_STRING_IF_MODIFIED_SINCE) -DEFINE_CGI_PARAM_RADIO ("hide-if-modified-since", ACTION_HIDE_IF_MODIFIED_SINCE, ACTION_STRING_IF_MODIFIED_SINCE, "block", 0) -DEFINE_CGI_PARAM_CUSTOM ("hide-if-modified-since", ACTION_HIDE_IF_MODIFIED_SINCE, ACTION_STRING_IF_MODIFIED_SINCE, "-1") -DEFINE_ACTION_STRING ("hide-referrer", ACTION_HIDE_REFERER, ACTION_STRING_REFERER) -DEFINE_CGI_PARAM_RADIO ("hide-referrer", ACTION_HIDE_REFERER, ACTION_STRING_REFERER, "conditional-forge", 3) -DEFINE_CGI_PARAM_RADIO ("hide-referrer", ACTION_HIDE_REFERER, ACTION_STRING_REFERER, "conditional-block", 2) -DEFINE_CGI_PARAM_RADIO ("hide-referrer", ACTION_HIDE_REFERER, ACTION_STRING_REFERER, "forge", 1) -DEFINE_CGI_PARAM_RADIO ("hide-referrer", ACTION_HIDE_REFERER, ACTION_STRING_REFERER, "block", 0) -DEFINE_CGI_PARAM_CUSTOM ("hide-referrer", ACTION_HIDE_REFERER, ACTION_STRING_REFERER, "http://www.privoxy.org/") -DEFINE_ACTION_STRING ("hide-user-agent", ACTION_HIDE_USER_AGENT, ACTION_STRING_USER_AGENT) -DEFINE_CGI_PARAM_NO_RADIO("hide-user-agent", ACTION_HIDE_USER_AGENT, ACTION_STRING_USER_AGENT, "Privoxy " VERSION) -DEFINE_ACTION_STRING ("limit-connect", ACTION_LIMIT_CONNECT, ACTION_STRING_LIMIT_CONNECT) -DEFINE_CGI_PARAM_NO_RADIO("limit-connect", ACTION_LIMIT_CONNECT, ACTION_STRING_LIMIT_CONNECT, "443") -DEFINE_ACTION_STRING ("overwrite-last-modified", ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED) -DEFINE_CGI_PARAM_RADIO ("overwrite-last-modified", ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED, "block", 0) -DEFINE_CGI_PARAM_RADIO ("overwrite-last-modified", ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED, "reset-to-request-time", 1) -DEFINE_CGI_PARAM_RADIO ("overwrite-last-modified", ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED, "randomize", 2) -DEFINE_ACTION_BOOL ("prevent-compression", ACTION_NO_COMPRESSION) -DEFINE_ACTION_STRING ("redirect", ACTION_REDIRECT, ACTION_STRING_REDIRECT) -DEFINE_CGI_PARAM_NO_RADIO("redirect", ACTION_REDIRECT, ACTION_STRING_REDIRECT, "http://localhost/") -DEFINE_ACTION_MULTI ("server-header-filter", ACTION_MULTI_SERVER_HEADER_FILTER) -DEFINE_ACTION_MULTI ("server-header-tagger", ACTION_MULTI_SERVER_HEADER_TAGGER) -DEFINE_ACTION_BOOL ("session-cookies-only", ACTION_NO_COOKIE_KEEP) -DEFINE_ACTION_STRING ("set-image-blocker", ACTION_IMAGE_BLOCKER, ACTION_STRING_IMAGE_BLOCKER) -DEFINE_CGI_PARAM_RADIO ("set-image-blocker", ACTION_IMAGE_BLOCKER, ACTION_STRING_IMAGE_BLOCKER, "pattern", 1) -DEFINE_CGI_PARAM_RADIO ("set-image-blocker", ACTION_IMAGE_BLOCKER, ACTION_STRING_IMAGE_BLOCKER, "blank", 0) -DEFINE_CGI_PARAM_CUSTOM ("set-image-blocker", ACTION_IMAGE_BLOCKER, ACTION_STRING_IMAGE_BLOCKER, CGI_PREFIX "send-banner?type=pattern") - -#if DEFINE_ACTION_ALIAS - -/* - * Alternative spellings - */ -DEFINE_ACTION_STRING ("hide-referer", ACTION_HIDE_REFERER, ACTION_STRING_REFERER) -DEFINE_ACTION_BOOL ("prevent-keeping-cookies", ACTION_NO_COOKIE_KEEP) - -/* - * Pre-3.0.7 (pseudo) compatibility - */ -DEFINE_ACTION_MULTI ("filter-client-headers", ACTION_MULTI_CLIENT_HEADER_FILTER) -DEFINE_ACTION_MULTI ("filter-server-headers", ACTION_MULTI_SERVER_HEADER_FILTER) - -/* - * Pre-3.0 compatibility - */ -DEFINE_ACTION_BOOL ("no-cookie-read", ACTION_NO_COOKIE_READ) -DEFINE_ACTION_BOOL ("no-cookie-set", ACTION_NO_COOKIE_SET) -DEFINE_ACTION_BOOL ("prevent-reading-cookies", ACTION_NO_COOKIE_READ) -DEFINE_ACTION_BOOL ("prevent-setting-cookies", ACTION_NO_COOKIE_SET) -DEFINE_ACTION_BOOL ("downgrade", ACTION_DOWNGRADE) -DEFINE_ACTION_STRING ("hide-from", ACTION_HIDE_FROM, ACTION_STRING_FROM) -DEFINE_ACTION_BOOL ("image", ACTION_IMAGE) -DEFINE_ACTION_STRING ("image-blocker", ACTION_IMAGE_BLOCKER, ACTION_STRING_IMAGE_BLOCKER) -DEFINE_ACTION_BOOL ("no-compression", ACTION_NO_COMPRESSION) -DEFINE_ACTION_BOOL ("no-cookies-keep", ACTION_NO_COOKIE_KEEP) -DEFINE_ACTION_BOOL ("no-cookies-read", ACTION_NO_COOKIE_READ) -DEFINE_ACTION_BOOL ("no-cookies-set", ACTION_NO_COOKIE_SET) -#endif /* if DEFINE_ACTION_ALIAS */ - -#undef DEFINE_ACTION_MULTI -#undef DEFINE_ACTION_STRING -#undef DEFINE_ACTION_BOOL -#undef DEFINE_ACTION_ALIAS -#undef DEFINE_CGI_PARAM_CUSTOM -#undef DEFINE_CGI_PARAM_RADIO -#undef DEFINE_CGI_PARAM_NO_RADIO - diff --git a/external/privoxy/actions.c b/external/privoxy/actions.c deleted file mode 100644 index 172085f..0000000 --- a/external/privoxy/actions.c +++ /dev/null @@ -1,2021 +0,0 @@ -const char actions_rcs[] = "$Id: actions.c,v 1.56 2009/03/08 14:19:21 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/actions.c,v $ - * - * Purpose : Declares functions to work with actions files - * Functions declared include: FIXME - * - * Copyright : Written by and Copyright (C) 2001-2008 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: actions.c,v $ - * Revision 1.56 2009/03/08 14:19:21 fabiankeil - * Fix justified (but harmless) compiler warnings - * on platforms where sizeof(int) < sizeof(long). - * - * Revision 1.55 2008/12/04 18:18:56 fabiankeil - * Fix some cparser warnings. - * - * Revision 1.54 2008/09/20 10:04:33 fabiankeil - * Remove hide-forwarded-for-headers action which has - * been obsoleted by change-x-forwarded-for{block}. - * - * Revision 1.53 2008/05/26 16:04:04 fabiankeil - * s@memorey@memory@ - * - * Revision 1.52 2008/04/27 16:26:59 fabiankeil - * White space fix for the last commit. - * - * Revision 1.51 2008/04/27 16:20:19 fabiankeil - * Complain about every block action without reason found. - * - * Revision 1.50 2008/03/30 14:52:00 fabiankeil - * Rename load_actions_file() and load_re_filterfile() - * as they load multiple files "now". - * - * Revision 1.49 2008/03/29 12:13:45 fabiankeil - * Remove send-wafer and send-vanilla-wafer actions. - * - * Revision 1.48 2008/03/28 18:17:14 fabiankeil - * In action_used_to_be_valid(), loop through an array of formerly - * valid actions instead of using an OR-chain of strcmpic() calls. - * - * Revision 1.47 2008/03/28 15:13:37 fabiankeil - * Remove inspect-jpegs action. - * - * Revision 1.46 2008/03/27 18:27:20 fabiankeil - * Remove kill-popups action. - * - * Revision 1.45 2008/03/24 11:21:02 fabiankeil - * Share the action settings for multiple patterns in the same - * section so we waste less memory for gigantic block lists - * (and load them slightly faster). Reported by Franz Schwartau. - * - * Revision 1.44 2008/03/04 18:30:34 fabiankeil - * Remove the treat-forbidden-connects-like-blocks action. We now - * use the "blocked" page for forbidden CONNECT requests by default. - * - * Revision 1.43 2008/03/01 14:00:43 fabiankeil - * Let the block action take the reason for the block - * as argument and show it on the "blocked" page. - * - * Revision 1.42 2008/02/09 15:15:38 fabiankeil - * List active and inactive actions in the show-url-info's - * "Final results" section separately. Patch submitted by Lee - * in #1830056, modified to list active actions first. - * - * Revision 1.41 2008/01/28 20:17:40 fabiankeil - * - Mark some parameters as immutable. - * - Hide update_action_bits_for_all_tags() while it's unused. - * - * Revision 1.40 2007/05/21 10:26:50 fabiankeil - * - Use strlcpy() instead of strcpy(). - * - Provide a reason why loading the actions - * file might have failed. - * - * Revision 1.39 2007/04/17 18:21:45 fabiankeil - * Split update_action_bits() into - * update_action_bits_for_all_tags() - * and update_action_bits_for_tag(). - * - * Revision 1.38 2007/04/15 16:39:20 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.37 2007/03/11 15:56:12 fabiankeil - * Add kludge to log unknown aliases and actions before exiting. - * - * Revision 1.36 2006/12/28 17:15:42 fabiankeil - * Fix gcc43 conversion warning. - * - * Revision 1.35 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.32.2.6 2006/01/29 23:10:56 david__schmidt - * Multiple filter file support - * - * Revision 1.32.2.5 2005/06/09 01:18:41 david__schmidt - * Tweaks to conditionally include pthread.h if FEATURE_PTHREAD is enabled - - * this becomes important when jcc.h gets included later down the line. - * - * Revision 1.32.2.4 2003/12/03 10:33:11 oes - * - Implemented Privoxy version requirement through - * for-privoxy-version= statement in {{settings}} - * block - * - Fix for unchecked out-of-memory condition - * - * Revision 1.32.2.3 2003/02/28 12:52:10 oes - * Fixed memory leak reported by Dan Price in Bug #694713 - * - * Revision 1.32.2.2 2002/11/20 14:36:55 oes - * Extended unload_current_actions_file() to multiple AFs. - * Thanks to Oliver Stoeneberg for the hint. - * - * Revision 1.32.2.1 2002/05/26 12:13:16 roro - * Change unsigned to unsigned long in actions_name struct. This closes - * SourceForge Bug #539284. - * - * Revision 1.32 2002/05/12 21:36:29 jongfoster - * Correcting function comments - * - * Revision 1.31 2002/05/06 07:56:50 oes - * Made actions_to_html independent of FEATURE_CGI_EDIT_ACTIONS - * - * Revision 1.30 2002/04/30 11:14:52 oes - * Made csp the first parameter in *action_to_html - * - * Revision 1.29 2002/04/26 19:30:54 jongfoster - * - current_action_to_html(): Adding help link for the "-" form of - * one-string actions. - * - Some actions had "<br>-", some "<br> -" (note the space). - * Standardizing on no space. - * - Greatly simplifying some of the code by using string_join() - * where appropriate. - * - * Revision 1.28 2002/04/26 12:53:15 oes - * - CGI AF editor now writes action lines split into - * single lines with line continuation - * - actions_to_html now embeds each action name in - * link to chapter - * - current_action_to_text is now called current_action_to_html - * and acts like actions_to_html - * - * Revision 1.27 2002/04/24 02:10:31 oes - * - Jon's patch for multiple AFs: - * - split load_actions_file, add load_one_actions_file - * - make csp->actions_list files an array - * - remember file id with each action - * - Copy_action now frees dest action before copying - * - * Revision 1.26 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.25 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.24 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.23 2002/03/07 03:46:16 oes - * Fixed compiler warnings - * - * Revision 1.22 2002/01/21 00:27:02 jongfoster - * Allowing free_action(NULL). - * Moving the functions that #include actionlist.h to the end of the file, - * because the Visual C++ 97 debugger gets extremely confused if you try - * to debug any code that comes after them in the file. - * - * Revision 1.21 2002/01/17 20:54:44 jongfoster - * Renaming free_url to free_url_spec, since it frees a struct url_spec. - * - * Revision 1.20 2001/11/22 21:56:49 jongfoster - * Making action_spec->flags into an unsigned long rather than just an - * unsigned int. - * Fixing a bug in the display of -add-header and -wafer - * - * Revision 1.19 2001/11/13 00:14:07 jongfoster - * Fixing stupid bug now I've figured out what || means. - * (It always returns 0 or 1, not one of it's paramaters.) - * - * Revision 1.18 2001/11/07 00:06:06 steudten - * Add line number in error output for lineparsing for - * actionsfile. - * - * Revision 1.17 2001/10/25 03:40:47 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.16 2001/10/23 21:30:30 jongfoster - * Adding error-checking to selected functions. - * - * Revision 1.15 2001/10/14 21:58:22 jongfoster - * Adding support for the CGI-based editor: - * - Exported get_actions() - * - Added new function free_alias_list() - * - Added support for {{settings}} and {{description}} blocks - * in the actions file. They are currently ignored. - * - Added restriction to only one {{alias}} block which must appear - * first in the file, to simplify the editor's rewriting rules. - * - Note that load_actions_file() is no longer used by the CGI-based - * editor, but some of the other routines in this file are. - * - * Revision 1.14 2001/09/22 16:36:59 jongfoster - * Removing unused parameter fs from read_config_line() - * - * Revision 1.13 2001/09/16 15:47:37 jongfoster - * First version of CGI-based edit interface. This is very much a - * work-in-progress, and you can't actually use it to edit anything - * yet. You must #define FEATURE_CGI_EDIT_ACTIONS for these changes - * to have any effect. - * - * Revision 1.12 2001/09/16 13:21:27 jongfoster - * Changes to use new list functions. - * - * Revision 1.11 2001/09/14 00:17:32 jongfoster - * Tidying up memory allocation. New function init_action(). - * - * Revision 1.10 2001/09/10 10:14:34 oes - * Removing unused variable - * - * Revision 1.9 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.8 2001/06/29 13:19:52 oes - * Removed logentry from cancelled commit - * - * Revision 1.7 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.6 2001/06/07 23:04:34 jongfoster - * Made get_actions() static. - * - * Revision 1.5 2001/06/03 19:11:48 oes - * adapted to new enlist_unique arg format - * - * Revision 1.4 2001/06/01 20:03:42 jongfoster - * Better memory management - current_action->strings[] now - * contains copies of the strings, not the original. - * - * Revision 1.3 2001/06/01 18:49:17 jongfoster - * Replaced "list_share" with "list" - the tiny memory gain was not - * worth the extra complexity. - * - * Revision 1.2 2001/05/31 21:40:00 jongfoster - * Removing some commented out, obsolete blocks of code. - * - * Revision 1.1 2001/05/31 21:16:46 jongfoster - * Moved functions to process the action list into this new file. - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <string.h> -#include <assert.h> -#include <stdlib.h> - -#ifdef FEATURE_PTHREAD -#include <pthread.h> -#endif - -#include "project.h" -#include "jcc.h" -#include "list.h" -#include "actions.h" -#include "miscutil.h" -#include "errlog.h" -#include "loaders.h" -#include "encode.h" -#include "urlmatch.h" -#include "cgi.h" -#include "ssplit.h" - -const char actions_h_rcs[] = ACTIONS_H_VERSION; - - -/* - * We need the main list of options. - * - * First, we need a way to tell between boolean, string, and multi-string - * options. For string and multistring options, we also need to be - * able to tell the difference between a "+" and a "-". (For bools, - * the "+"/"-" information is encoded in "add" and "mask"). So we use - * an enumerated type (well, the preprocessor equivalent). Here are - * the values: - */ -#define AV_NONE 0 /* +opt -opt */ -#define AV_ADD_STRING 1 /* +stropt{string} */ -#define AV_REM_STRING 2 /* -stropt */ -#define AV_ADD_MULTI 3 /* +multiopt{string} +multiopt{string2} */ -#define AV_REM_MULTI 4 /* -multiopt{string} -multiopt */ - -/* - * We need a structure to hold the name, flag changes, - * type, and string index. - */ -struct action_name -{ - const char * name; - unsigned long mask; /* a bit set to "0" = remove action */ - unsigned long add; /* a bit set to "1" = add action */ - int takes_value; /* an AV_... constant */ - int index; /* index into strings[] or multi[] */ -}; - -/* - * And with those building blocks in place, here's the array. - */ -static const struct action_name action_names[] = -{ - /* - * Well actually there's no data here - it's in actionlist.h - * This keeps it together to make it easy to change. - * - * Here's the macros used to format it: - */ -#define DEFINE_ACTION_MULTI(name,index) \ - { "+" name, ACTION_MASK_ALL, 0, AV_ADD_MULTI, index }, \ - { "-" name, ACTION_MASK_ALL, 0, AV_REM_MULTI, index }, -#define DEFINE_ACTION_STRING(name,flag,index) \ - { "+" name, ACTION_MASK_ALL, flag, AV_ADD_STRING, index }, \ - { "-" name, ~flag, 0, AV_REM_STRING, index }, -#define DEFINE_ACTION_BOOL(name,flag) \ - { "+" name, ACTION_MASK_ALL, flag }, \ - { "-" name, ~flag, 0 }, -#define DEFINE_ACTION_ALIAS 1 /* Want aliases please */ - -#include "actionlist.h" - -#undef DEFINE_ACTION_MULTI -#undef DEFINE_ACTION_STRING -#undef DEFINE_ACTION_BOOL -#undef DEFINE_ACTION_ALIAS - - { NULL, 0, 0 } /* End marker */ -}; - - -static int load_one_actions_file(struct client_state *csp, int fileid); - - -/********************************************************************* - * - * Function : merge_actions - * - * Description : Merge two actions together. - * Similar to "dest += src". - * - * Parameters : - * 1 : dest = Actions to modify. - * 2 : src = Action to add. - * - * Returns : JB_ERR_OK or JB_ERR_MEMORY - * - *********************************************************************/ -jb_err merge_actions (struct action_spec *dest, - const struct action_spec *src) -{ - int i; - jb_err err; - - dest->mask &= src->mask; - dest->add &= src->mask; - dest->add |= src->add; - - for (i = 0; i < ACTION_STRING_COUNT; i++) - { - char * str = src->string[i]; - if (str) - { - freez(dest->string[i]); - dest->string[i] = strdup(str); - if (NULL == dest->string[i]) - { - return JB_ERR_MEMORY; - } - } - } - - for (i = 0; i < ACTION_MULTI_COUNT; i++) - { - if (src->multi_remove_all[i]) - { - /* Remove everything from dest */ - list_remove_all(dest->multi_remove[i]); - dest->multi_remove_all[i] = 1; - - err = list_duplicate(dest->multi_add[i], src->multi_add[i]); - } - else if (dest->multi_remove_all[i]) - { - /* - * dest already removes everything, so we only need to worry - * about what we add. - */ - list_remove_list(dest->multi_add[i], src->multi_remove[i]); - err = list_append_list_unique(dest->multi_add[i], src->multi_add[i]); - } - else - { - /* No "remove all"s to worry about. */ - list_remove_list(dest->multi_add[i], src->multi_remove[i]); - err = list_append_list_unique(dest->multi_remove[i], src->multi_remove[i]); - if (!err) err = list_append_list_unique(dest->multi_add[i], src->multi_add[i]); - } - - if (err) - { - return err; - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : copy_action - * - * Description : Copy an action_specs. - * Similar to "dest = src". - * - * Parameters : - * 1 : dest = Destination of copy. - * 2 : src = Source for copy. - * - * Returns : N/A - * - *********************************************************************/ -jb_err copy_action (struct action_spec *dest, - const struct action_spec *src) -{ - int i; - jb_err err = JB_ERR_OK; - - free_action(dest); - memset(dest, '\0', sizeof(*dest)); - - dest->mask = src->mask; - dest->add = src->add; - - for (i = 0; i < ACTION_STRING_COUNT; i++) - { - char * str = src->string[i]; - if (str) - { - str = strdup(str); - if (!str) - { - return JB_ERR_MEMORY; - } - dest->string[i] = str; - } - } - - for (i = 0; i < ACTION_MULTI_COUNT; i++) - { - dest->multi_remove_all[i] = src->multi_remove_all[i]; - err = list_duplicate(dest->multi_remove[i], src->multi_remove[i]); - if (err) - { - return err; - } - err = list_duplicate(dest->multi_add[i], src->multi_add[i]); - if (err) - { - return err; - } - } - return err; -} - -/********************************************************************* - * - * Function : free_action_spec - * - * Description : Frees an action_spec and the memory used by it. - * - * Parameters : - * 1 : src = Source to free. - * - * Returns : N/A - * - *********************************************************************/ -void free_action_spec(struct action_spec *src) -{ - free_action(src); - freez(src); -} - - -/********************************************************************* - * - * Function : free_action - * - * Description : Destroy an action_spec. Frees memory used by it, - * except for the memory used by the struct action_spec - * itself. - * - * Parameters : - * 1 : src = Source to free. - * - * Returns : N/A - * - *********************************************************************/ -void free_action (struct action_spec *src) -{ - int i; - - if (src == NULL) - { - return; - } - - for (i = 0; i < ACTION_STRING_COUNT; i++) - { - freez(src->string[i]); - } - - for (i = 0; i < ACTION_MULTI_COUNT; i++) - { - destroy_list(src->multi_remove[i]); - destroy_list(src->multi_add[i]); - } - - memset(src, '\0', sizeof(*src)); -} - - -/********************************************************************* - * - * Function : get_action_token - * - * Description : Parses a line for the first action. - * Modifies it's input array, doesn't allocate memory. - * e.g. given: - * *line=" +abc{def} -ghi " - * Returns: - * *line=" -ghi " - * *name="+abc" - * *value="def" - * - * Parameters : - * 1 : line = [in] The line containing the action. - * [out] Start of next action on line, or - * NULL if we reached the end of line before - * we found an action. - * 2 : name = [out] Start of action name, null - * terminated. NULL on EOL - * 3 : value = [out] Start of action value, null - * terminated. NULL if none or EOL. - * - * Returns : JB_ERR_OK => Ok - * JB_ERR_PARSE => Mismatched {} (line was trashed anyway) - * - *********************************************************************/ -jb_err get_action_token(char **line, char **name, char **value) -{ - char * str = *line; - char ch; - - /* set default returns */ - *line = NULL; - *name = NULL; - *value = NULL; - - /* Eat any leading whitespace */ - while ((*str == ' ') || (*str == '\t')) - { - str++; - } - - if (*str == '\0') - { - return 0; - } - - if (*str == '{') - { - /* null name, just value is prohibited */ - return JB_ERR_PARSE; - } - - *name = str; - - /* parse option */ - while (((ch = *str) != '\0') && - (ch != ' ') && (ch != '\t') && (ch != '{')) - { - if (ch == '}') - { - /* error, '}' without '{' */ - return JB_ERR_PARSE; - } - str++; - } - *str = '\0'; - - if (ch != '{') - { - /* no value */ - if (ch == '\0') - { - /* EOL - be careful not to run off buffer */ - *line = str; - } - else - { - /* More to parse next time. */ - *line = str + 1; - } - return JB_ERR_OK; - } - - str++; - *value = str; - - str = strchr(str, '}'); - if (str == NULL) - { - /* error */ - *value = NULL; - return JB_ERR_PARSE; - } - - /* got value */ - *str = '\0'; - *line = str + 1; - - chomp(*value); - - return JB_ERR_OK; -} - -/********************************************************************* - * - * Function : action_used_to_be_valid - * - * Description : Checks if unrecognized actions were valid in earlier - * releases. - * - * Parameters : - * 1 : action = The string containing the action to check. - * - * Returns : True if yes, otherwise false. - * - *********************************************************************/ -static int action_used_to_be_valid(const char *action) -{ - static const char *formerly_valid_actions[] = { - "inspect-jpegs", - "kill-popups", - "send-vanilla-wafer", - "send-wafer", - "treat-forbidden-connects-like-blocks", - "vanilla-wafer", - "wafer" - }; - unsigned int i; - - for (i = 0; i < SZ(formerly_valid_actions); i++) - { - if (0 == strcmpic(action, formerly_valid_actions[i])) - { - return TRUE; - } - } - - return FALSE; -} - -/********************************************************************* - * - * Function : get_actions - * - * Description : Parses a list of actions. - * - * Parameters : - * 1 : line = The string containing the actions. - * Will be written to by this function. - * 2 : alias_list = Custom alias list, or NULL for none. - * 3 : cur_action = Where to store the action. Caller - * allocates memory. - * - * Returns : JB_ERR_OK => Ok - * JB_ERR_PARSE => Parse error (line was trashed anyway) - * nonzero => Out of memory (line was trashed anyway) - * - *********************************************************************/ -jb_err get_actions(char *line, - struct action_alias * alias_list, - struct action_spec *cur_action) -{ - jb_err err; - init_action(cur_action); - cur_action->mask = ACTION_MASK_ALL; - - while (line) - { - char * option = NULL; - char * value = NULL; - - err = get_action_token(&line, &option, &value); - if (err) - { - return err; - } - - if (option) - { - /* handle option in 'option' */ - - /* Check for standard action name */ - const struct action_name * action = action_names; - - while ( (action->name != NULL) && (0 != strcmpic(action->name, option)) ) - { - action++; - } - if (action->name != NULL) - { - /* Found it */ - cur_action->mask &= action->mask; - cur_action->add &= action->mask; - cur_action->add |= action->add; - - switch (action->takes_value) - { - case AV_NONE: - /* ignore any option. */ - break; - case AV_ADD_STRING: - { - /* add single string. */ - - if ((value == NULL) || (*value == '\0')) - { - if (0 != strcmpic(action->name, "block")) - { - /* - * XXX: Temporary backwards compatibility hack. - * XXX: should include line number. - */ - value = "No reason specified."; - log_error(LOG_LEVEL_ERROR, - "block action without reason found. This may " - "become a fatal error in future versions."); - } - else - { - return JB_ERR_PARSE; - } - } - /* FIXME: should validate option string here */ - freez (cur_action->string[action->index]); - cur_action->string[action->index] = strdup(value); - if (NULL == cur_action->string[action->index]) - { - return JB_ERR_MEMORY; - } - break; - } - case AV_REM_STRING: - { - /* remove single string. */ - - freez (cur_action->string[action->index]); - break; - } - case AV_ADD_MULTI: - { - /* append multi string. */ - - struct list * remove_p = cur_action->multi_remove[action->index]; - struct list * add_p = cur_action->multi_add[action->index]; - - if ((value == NULL) || (*value == '\0')) - { - return JB_ERR_PARSE; - } - - list_remove_item(remove_p, value); - err = enlist_unique(add_p, value, 0); - if (err) - { - return err; - } - break; - } - case AV_REM_MULTI: - { - /* remove multi string. */ - - struct list * remove_p = cur_action->multi_remove[action->index]; - struct list * add_p = cur_action->multi_add[action->index]; - - if ( (value == NULL) || (*value == '\0') - || ((*value == '*') && (value[1] == '\0')) ) - { - /* - * no option, or option == "*". - * - * Remove *ALL*. - */ - list_remove_all(remove_p); - list_remove_all(add_p); - cur_action->multi_remove_all[action->index] = 1; - } - else - { - /* Valid option - remove only 1 option */ - - if ( !cur_action->multi_remove_all[action->index] ) - { - /* there isn't a catch-all in the remove list already */ - err = enlist_unique(remove_p, value, 0); - if (err) - { - return err; - } - } - list_remove_item(add_p, value); - } - break; - } - default: - /* Shouldn't get here unless there's memory corruption. */ - assert(0); - return JB_ERR_PARSE; - } - } - else - { - /* try user aliases. */ - const struct action_alias * alias = alias_list; - - while ( (alias != NULL) && (0 != strcmpic(alias->name, option)) ) - { - alias = alias->next; - } - if (alias != NULL) - { - /* Found it */ - merge_actions(cur_action, alias->action); - } - else if (((size_t)2 < strlen(option)) && action_used_to_be_valid(option+1)) - { - log_error(LOG_LEVEL_ERROR, "Action '%s' is no longer valid " - "in this Privoxy release. Ignored.", option+1); - } - else if (((size_t)2 < strlen(option)) && 0 == strcmpic(option+1, "hide-forwarded-for-headers")) - { - log_error(LOG_LEVEL_FATAL, "The action 'hide-forwarded-for-headers' " - "is no longer valid in this Privoxy release. " - "Use 'change-x-forwarded-for' instead."); - } - else - { - /* Bad action name */ - /* - * XXX: This is a fatal error and Privoxy will later on exit - * in load_one_actions_file() because of an "invalid line". - * - * It would be preferable to name the offending option in that - * error message, but currently there is no way to do that and - * we have to live with two error messages for basically the - * same reason. - */ - log_error(LOG_LEVEL_ERROR, "Unknown action or alias: %s", option); - return JB_ERR_PARSE; - } - } - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : init_current_action - * - * Description : Zero out an action. - * - * Parameters : - * 1 : dest = An uninitialized current_action_spec. - * - * Returns : N/A - * - *********************************************************************/ -void init_current_action (struct current_action_spec *dest) -{ - memset(dest, '\0', sizeof(*dest)); - - dest->flags = ACTION_MOST_COMPATIBLE; -} - - -/********************************************************************* - * - * Function : init_action - * - * Description : Zero out an action. - * - * Parameters : - * 1 : dest = An uninitialized action_spec. - * - * Returns : N/A - * - *********************************************************************/ -void init_action (struct action_spec *dest) -{ - memset(dest, '\0', sizeof(*dest)); -} - - -/********************************************************************* - * - * Function : merge_current_action - * - * Description : Merge two actions together. - * Similar to "dest += src". - * Differences between this and merge_actions() - * is that this one doesn't allocate memory for - * strings (so "src" better be in memory for at least - * as long as "dest" is, and you'd better free - * "dest" using "free_current_action"). - * Also, there is no mask or remove lists in dest. - * (If we're applying it to a URL, we don't need them) - * - * Parameters : - * 1 : dest = Current actions, to modify. - * 2 : src = Action to add. - * - * Returns 0 : no error - * !=0 : error, probably JB_ERR_MEMORY. - * - *********************************************************************/ -jb_err merge_current_action (struct current_action_spec *dest, - const struct action_spec *src) -{ - int i; - jb_err err = JB_ERR_OK; - - dest->flags &= src->mask; - dest->flags |= src->add; - - for (i = 0; i < ACTION_STRING_COUNT; i++) - { - char * str = src->string[i]; - if (str) - { - str = strdup(str); - if (!str) - { - return JB_ERR_MEMORY; - } - freez(dest->string[i]); - dest->string[i] = str; - } - } - - for (i = 0; i < ACTION_MULTI_COUNT; i++) - { - if (src->multi_remove_all[i]) - { - /* Remove everything from dest, then add src->multi_add */ - err = list_duplicate(dest->multi[i], src->multi_add[i]); - if (err) - { - return err; - } - } - else - { - list_remove_list(dest->multi[i], src->multi_remove[i]); - err = list_append_list_unique(dest->multi[i], src->multi_add[i]); - if (err) - { - return err; - } - } - } - return err; -} - -#if 0 -/********************************************************************* - * - * Function : update_action_bits_for_all_tags - * - * Description : Updates the action bits based on all matching tags. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : 0 if no tag matched, or - * 1 otherwise - * - *********************************************************************/ -int update_action_bits_for_all_tags(struct client_state *csp) -{ - struct list_entry *tag; - int updated = 0; - - for (tag = csp->tags->first; tag != NULL; tag = tag->next) - { - if (update_action_bits_for_tag(csp, tag->str)) - { - updated = 1; - } - } - - return updated; -} -#endif - -/********************************************************************* - * - * Function : update_action_bits_for_tag - * - * Description : Updates the action bits based on the action sections - * whose tag patterns match a provided tag. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : tag = The tag on which the update should be based on - * - * Returns : 0 if no tag matched, or - * 1 otherwise - * - *********************************************************************/ -int update_action_bits_for_tag(struct client_state *csp, const char *tag) -{ - struct file_list *fl; - struct url_actions *b; - - int updated = 0; - int i; - - assert(tag); - assert(list_contains_item(csp->tags, tag)); - - /* Run through all action files, */ - for (i = 0; i < MAX_AF_FILES; i++) - { - if (((fl = csp->actions_list[i]) == NULL) || ((b = fl->f) == NULL)) - { - /* Skip empty files */ - continue; - } - - /* and through all the action patterns, */ - for (b = b->next; NULL != b; b = b->next) - { - /* skip the URL patterns, */ - if (NULL == b->url->tag_regex) - { - continue; - } - - /* and check if one of the tag patterns matches the tag, */ - if (0 == regexec(b->url->tag_regex, tag, 0, NULL, 0)) - { - /* if it does, update the action bit map, */ - if (merge_current_action(csp->action, b->action)) - { - log_error(LOG_LEVEL_ERROR, - "Out of memory while changing action bits"); - } - /* and signal the change. */ - updated = 1; - } - } - } - - return updated; -} - - -/********************************************************************* - * - * Function : free_current_action - * - * Description : Free memory used by a current_action_spec. - * Does not free the current_action_spec itself. - * - * Parameters : - * 1 : src = Source to free. - * - * Returns : N/A - * - *********************************************************************/ -void free_current_action (struct current_action_spec *src) -{ - int i; - - for (i = 0; i < ACTION_STRING_COUNT; i++) - { - freez(src->string[i]); - } - - for (i = 0; i < ACTION_MULTI_COUNT; i++) - { - destroy_list(src->multi[i]); - } - - memset(src, '\0', sizeof(*src)); -} - - -static struct file_list *current_actions_file[MAX_AF_FILES] = { - NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL -}; - - -#ifdef FEATURE_GRACEFUL_TERMINATION -/********************************************************************* - * - * Function : unload_current_actions_file - * - * Description : Unloads current actions file - reset to state at - * beginning of program. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void unload_current_actions_file(void) -{ - int i; - - for (i = 0; i < MAX_AF_FILES; i++) - { - if (current_actions_file[i]) - { - current_actions_file[i]->unloader = unload_actions_file; - current_actions_file[i] = NULL; - } - } -} -#endif /* FEATURE_GRACEFUL_TERMINATION */ - - -/********************************************************************* - * - * Function : unload_actions_file - * - * Description : Unloads an actions module. - * - * Parameters : - * 1 : file_data = the data structure associated with the - * actions file. - * - * Returns : N/A - * - *********************************************************************/ -void unload_actions_file(void *file_data) -{ - struct url_actions * next; - struct url_actions * cur = (struct url_actions *)file_data; - while (cur != NULL) - { - next = cur->next; - free_url_spec(cur->url); - if ((next == NULL) || (next->action != cur->action)) - { - /* - * As the action settings might be shared, - * we can only free them if the current - * url pattern is the last one, or if the - * next one is using different settings. - */ - free_action_spec(cur->action); - } - freez(cur); - cur = next; - } -} - - -/********************************************************************* - * - * Function : free_alias_list - * - * Description : Free memory used by a list of aliases. - * - * Parameters : - * 1 : alias_list = Linked list to free. - * - * Returns : N/A - * - *********************************************************************/ -void free_alias_list(struct action_alias *alias_list) -{ - while (alias_list != NULL) - { - struct action_alias * next = alias_list->next; - alias_list->next = NULL; - freez(alias_list->name); - free_action(alias_list->action); - free(alias_list); - alias_list = next; - } -} - - -/********************************************************************* - * - * Function : load_action_files - * - * Description : Read and parse all the action files and add to files - * list. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int load_action_files(struct client_state *csp) -{ - int i; - int result; - - for (i = 0; i < MAX_AF_FILES; i++) - { - if (csp->config->actions_file[i]) - { - result = load_one_actions_file(csp, i); - if (result) - { - return result; - } - } - else if (current_actions_file[i]) - { - current_actions_file[i]->unloader = unload_actions_file; - current_actions_file[i] = NULL; - } - } - - return 0; -} - -/********************************************************************* - * - * Function : load_one_actions_file - * - * Description : Read and parse a action file and add to files - * list. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : fileid = File index to load. - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -static int load_one_actions_file(struct client_state *csp, int fileid) -{ - - /* - * Parser mode. - * Note: Keep these in the order they occur in the file, they are - * sometimes tested with <= - */ -#define MODE_START_OF_FILE 1 -#define MODE_SETTINGS 2 -#define MODE_DESCRIPTION 3 -#define MODE_ALIAS 4 -#define MODE_ACTIONS 5 - - int mode = MODE_START_OF_FILE; - - FILE *fp; - struct url_actions *last_perm; - struct url_actions *perm; - char buf[BUFFER_SIZE]; - struct file_list *fs; - struct action_spec * cur_action = NULL; - int cur_action_used = 0; - struct action_alias * alias_list = NULL; - unsigned long linenum = 0; - - if (!check_file_changed(current_actions_file[fileid], csp->config->actions_file[fileid], &fs)) - { - /* No need to load */ - csp->actions_list[fileid] = current_actions_file[fileid]; - return 0; - } - if (!fs) - { - log_error(LOG_LEVEL_FATAL, "can't load actions file '%s': %E. " - "Note that beginning with Privoxy 3.0.7, actions files have to be specified " - "with their complete file names.", csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - - fs->f = last_perm = (struct url_actions *)zalloc(sizeof(*last_perm)); - if (last_perm == NULL) - { - log_error(LOG_LEVEL_FATAL, "can't load actions file '%s': out of memory!", - csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - - if ((fp = fopen(csp->config->actions_file[fileid], "r")) == NULL) - { - log_error(LOG_LEVEL_FATAL, "can't load actions file '%s': error opening file: %E", - csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - - while (read_config_line(buf, sizeof(buf), fp, &linenum) != NULL) - { - if (*buf == '{') - { - /* It's a header block */ - if (buf[1] == '{') - { - /* It's {{settings}} or {{alias}} */ - size_t len = strlen(buf); - char * start = buf + 2; - char * end = buf + len - 1; - if ((len < (size_t)5) || (*end-- != '}') || (*end-- != '}')) - { - /* too short */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid line (%lu): %s", - csp->config->actions_file[fileid], linenum, buf); - return 1; /* never get here */ - } - - /* Trim leading and trailing whitespace. */ - end[1] = '\0'; - chomp(start); - - if (*start == '\0') - { - /* too short */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid line (%lu): {{ }}", - csp->config->actions_file[fileid], linenum); - return 1; /* never get here */ - } - - /* - * An actionsfile can optionally contain the following blocks. - * They *MUST* be in this order, to simplify processing: - * - * {{settings}} - * name=value... - * - * {{description}} - * ...free text, format TBD, but no line may start with a '{'... - * - * {{alias}} - * name=actions... - * - * The actual actions must be *after* these special blocks. - * None of these special blocks may be repeated. - * - */ - if (0 == strcmpic(start, "settings")) - { - /* it's a {{settings}} block */ - if (mode >= MODE_SETTINGS) - { - /* {{settings}} must be first thing in file and must only - * appear once. - */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': line %lu: {{settings}} must only appear once, and it must be before anything else.", - csp->config->actions_file[fileid], linenum); - } - mode = MODE_SETTINGS; - } - else if (0 == strcmpic(start, "description")) - { - /* it's a {{description}} block */ - if (mode >= MODE_DESCRIPTION) - { - /* {{description}} is a singleton and only {{settings}} may proceed it - */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': line %lu: {{description}} must only appear once, and only a {{settings}} block may be above it.", - csp->config->actions_file[fileid], linenum); - } - mode = MODE_DESCRIPTION; - } - else if (0 == strcmpic(start, "alias")) - { - /* it's an {{alias}} block */ - if (mode >= MODE_ALIAS) - { - /* {{alias}} must be first thing in file, possibly after - * {{settings}} and {{description}} - * - * {{alias}} must only appear once. - * - * Note that these are new restrictions introduced in - * v2.9.10 in order to make actionsfile editing simpler. - * (Otherwise, reordering actionsfile entries without - * completely rewriting the file becomes non-trivial) - */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': line %lu: {{alias}} must only appear once, and it must be before all actions.", - csp->config->actions_file[fileid], linenum); - } - mode = MODE_ALIAS; - } - else - { - /* invalid {{something}} block */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid line (%lu): {{%s}}", - csp->config->actions_file[fileid], linenum, start); - return 1; /* never get here */ - } - } - else - { - /* It's an actions block */ - - char actions_buf[BUFFER_SIZE]; - char * end; - - /* set mode */ - mode = MODE_ACTIONS; - - /* free old action */ - if (cur_action) - { - if (!cur_action_used) - { - free_action_spec(cur_action); - } - cur_action = NULL; - } - cur_action_used = 0; - cur_action = (struct action_spec *)zalloc(sizeof(*cur_action)); - if (cur_action == NULL) - { - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': out of memory", - csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - init_action(cur_action); - - /* trim { */ - strlcpy(actions_buf, buf + 1, sizeof(actions_buf)); - - /* check we have a trailing } and then trim it */ - end = actions_buf + strlen(actions_buf) - 1; - if (*end != '}') - { - /* No closing } */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid line (%lu): %s", - csp->config->actions_file[fileid], linenum, buf); - return 1; /* never get here */ - } - *end = '\0'; - - /* trim any whitespace immediately inside {} */ - chomp(actions_buf); - - if (get_actions(actions_buf, alias_list, cur_action)) - { - /* error */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid line (%lu): %s", - csp->config->actions_file[fileid], linenum, buf); - return 1; /* never get here */ - } - } - } - else if (mode == MODE_SETTINGS) - { - /* - * Part of the {{settings}} block. - * For now only serves to check if the file's minimum Privoxy - * version requirement is met, but we may want to read & check - * permissions when we go multi-user. - */ - if (!strncmp(buf, "for-privoxy-version=", 20)) - { - char *version_string, *fields[3]; - int num_fields; - - if ((version_string = strdup(buf + 20)) == NULL) - { - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': out of memory!", - csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - - num_fields = ssplit(version_string, ".", fields, 3, TRUE, FALSE); - - if (num_fields < 1 || atoi(fields[0]) == 0) - { - log_error(LOG_LEVEL_ERROR, - "While loading actions file '%s': invalid line (%lu): %s", - csp->config->actions_file[fileid], linenum, buf); - } - else if ( atoi(fields[0]) > VERSION_MAJOR - || (num_fields > 1 && atoi(fields[1]) > VERSION_MINOR) - || (num_fields > 2 && atoi(fields[2]) > VERSION_POINT)) - { - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "Actions file '%s', line %lu requires newer Privoxy version: %s", - csp->config->actions_file[fileid], linenum, buf ); - return 1; /* never get here */ - } - free(version_string); - } - } - else if (mode == MODE_DESCRIPTION) - { - /* - * Part of the {{description}} block. - * Ignore for now. - */ - } - else if (mode == MODE_ALIAS) - { - /* - * define an alias - */ - char actions_buf[BUFFER_SIZE]; - struct action_alias * new_alias; - - char * start = strchr(buf, '='); - char * end = start; - - if ((start == NULL) || (start == buf)) - { - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid alias line (%lu): %s", - csp->config->actions_file[fileid], linenum, buf); - return 1; /* never get here */ - } - - if ((new_alias = zalloc(sizeof(*new_alias))) == NULL) - { - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': out of memory!", - csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - - /* Eat any the whitespace before the '=' */ - end--; - while ((*end == ' ') || (*end == '\t')) - { - /* - * we already know we must have at least 1 non-ws char - * at start of buf - no need to check - */ - end--; - } - end[1] = '\0'; - - /* Eat any the whitespace after the '=' */ - start++; - while ((*start == ' ') || (*start == '\t')) - { - start++; - } - if (*start == '\0') - { - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid alias line (%lu): %s", - csp->config->actions_file[fileid], linenum, buf); - return 1; /* never get here */ - } - - if ((new_alias->name = strdup(buf)) == NULL) - { - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': out of memory!", - csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - - strlcpy(actions_buf, start, sizeof(actions_buf)); - - if (get_actions(actions_buf, alias_list, new_alias->action)) - { - /* error */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': invalid alias line (%lu): %s = %s", - csp->config->actions_file[fileid], linenum, buf, start); - return 1; /* never get here */ - } - - /* add to list */ - new_alias->next = alias_list; - alias_list = new_alias; - } - else if (mode == MODE_ACTIONS) - { - /* it's a URL pattern */ - - /* allocate a new node */ - if ((perm = zalloc(sizeof(*perm))) == NULL) - { - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': out of memory!", - csp->config->actions_file[fileid]); - return 1; /* never get here */ - } - - perm->action = cur_action; - cur_action_used = 1; - - /* Save the URL pattern */ - if (create_url_spec(perm->url, buf)) - { - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': line %lu: cannot create URL pattern from: %s", - csp->config->actions_file[fileid], linenum, buf); - return 1; /* never get here */ - } - - /* add it to the list */ - last_perm->next = perm; - last_perm = perm; - } - else if (mode == MODE_START_OF_FILE) - { - /* oops - please have a {} line as 1st line in file. */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': first needed line (%lu) is invalid: %s", - csp->config->actions_file[fileid], linenum, buf); - return 1; /* never get here */ - } - else - { - /* How did we get here? This is impossible! */ - fclose(fp); - log_error(LOG_LEVEL_FATAL, - "can't load actions file '%s': INTERNAL ERROR - mode = %d", - csp->config->actions_file[fileid], mode); - return 1; /* never get here */ - } - } - - fclose(fp); - - if (!cur_action_used) - { - free_action_spec(cur_action); - } - free_alias_list(alias_list); - - /* the old one is now obsolete */ - if (current_actions_file[fileid]) - { - current_actions_file[fileid]->unloader = unload_actions_file; - } - - fs->next = files->next; - files->next = fs; - current_actions_file[fileid] = fs; - - csp->actions_list[fileid] = fs; - - return(0); - -} - - -/********************************************************************* - * - * Function : actions_to_text - * - * Description : Converts a actionsfile entry from the internal - * structure into a text line. The output is split - * into one line for each action with line continuation. - * - * Parameters : - * 1 : action = The action to format. - * - * Returns : A string. Caller must free it. - * NULL on out-of-memory error. - * - *********************************************************************/ -char * actions_to_text(const struct action_spec *action) -{ - unsigned long mask = action->mask; - unsigned long add = action->add; - char *result = strdup(""); - struct list_entry * lst; - - /* sanity - prevents "-feature +feature" */ - mask |= add; - - -#define DEFINE_ACTION_BOOL(__name, __bit) \ - if (!(mask & __bit)) \ - { \ - string_append(&result, " -" __name " \\\n"); \ - } \ - else if (add & __bit) \ - { \ - string_append(&result, " +" __name " \\\n"); \ - } - -#define DEFINE_ACTION_STRING(__name, __bit, __index) \ - if (!(mask & __bit)) \ - { \ - string_append(&result, " -" __name " \\\n"); \ - } \ - else if (add & __bit) \ - { \ - string_append(&result, " +" __name "{"); \ - string_append(&result, action->string[__index]); \ - string_append(&result, "} \\\n"); \ - } - -#define DEFINE_ACTION_MULTI(__name, __index) \ - if (action->multi_remove_all[__index]) \ - { \ - string_append(&result, " -" __name " \\\n"); \ - } \ - else \ - { \ - lst = action->multi_remove[__index]->first; \ - while (lst) \ - { \ - string_append(&result, " -" __name "{"); \ - string_append(&result, lst->str); \ - string_append(&result, "} \\\n"); \ - lst = lst->next; \ - } \ - } \ - lst = action->multi_add[__index]->first; \ - while (lst) \ - { \ - string_append(&result, " +" __name "{"); \ - string_append(&result, lst->str); \ - string_append(&result, "} \\\n"); \ - lst = lst->next; \ - } - -#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */ - -#include "actionlist.h" - -#undef DEFINE_ACTION_MULTI -#undef DEFINE_ACTION_STRING -#undef DEFINE_ACTION_BOOL -#undef DEFINE_ACTION_ALIAS - - return result; -} - - -/********************************************************************* - * - * Function : actions_to_html - * - * Description : Converts a actionsfile entry from numeric form - * ("mask" and "add") to a <br>-seperated HTML string - * in which each action is linked to its chapter in - * the user manual. - * - * Parameters : - * 1 : csp = Client state (for config) - * 2 : action = Action spec to be converted - * - * Returns : A string. Caller must free it. - * NULL on out-of-memory error. - * - *********************************************************************/ -char * actions_to_html(const struct client_state *csp, - const struct action_spec *action) -{ - unsigned long mask = action->mask; - unsigned long add = action->add; - char *result = strdup(""); - struct list_entry * lst; - - /* sanity - prevents "-feature +feature" */ - mask |= add; - - -#define DEFINE_ACTION_BOOL(__name, __bit) \ - if (!(mask & __bit)) \ - { \ - string_append(&result, "\n<br>-"); \ - string_join(&result, add_help_link(__name, csp->config)); \ - } \ - else if (add & __bit) \ - { \ - string_append(&result, "\n<br>+"); \ - string_join(&result, add_help_link(__name, csp->config)); \ - } - -#define DEFINE_ACTION_STRING(__name, __bit, __index) \ - if (!(mask & __bit)) \ - { \ - string_append(&result, "\n<br>-"); \ - string_join(&result, add_help_link(__name, csp->config)); \ - } \ - else if (add & __bit) \ - { \ - string_append(&result, "\n<br>+"); \ - string_join(&result, add_help_link(__name, csp->config)); \ - string_append(&result, "{"); \ - string_join(&result, html_encode(action->string[__index])); \ - string_append(&result, "}"); \ - } - -#define DEFINE_ACTION_MULTI(__name, __index) \ - if (action->multi_remove_all[__index]) \ - { \ - string_append(&result, "\n<br>-"); \ - string_join(&result, add_help_link(__name, csp->config)); \ - } \ - else \ - { \ - lst = action->multi_remove[__index]->first; \ - while (lst) \ - { \ - string_append(&result, "\n<br>-"); \ - string_join(&result, add_help_link(__name, csp->config)); \ - string_append(&result, "{"); \ - string_join(&result, html_encode(lst->str)); \ - string_append(&result, "}"); \ - lst = lst->next; \ - } \ - } \ - lst = action->multi_add[__index]->first; \ - while (lst) \ - { \ - string_append(&result, "\n<br>+"); \ - string_join(&result, add_help_link(__name, csp->config)); \ - string_append(&result, "{"); \ - string_join(&result, html_encode(lst->str)); \ - string_append(&result, "}"); \ - lst = lst->next; \ - } - -#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */ - -#include "actionlist.h" - -#undef DEFINE_ACTION_MULTI -#undef DEFINE_ACTION_STRING -#undef DEFINE_ACTION_BOOL -#undef DEFINE_ACTION_ALIAS - - /* trim leading <br> */ - if (result && *result) - { - char * s = result; - result = strdup(result + 5); - free(s); - } - - return result; -} - - -/********************************************************************* - * - * Function : current_actions_to_html - * - * Description : Converts a curren action spec to a <br> seperated HTML - * text in which each action is linked to its chapter in - * the user manual. - * - * Parameters : - * 1 : csp = Client state (for config) - * 2 : action = Current action spec to be converted - * - * Returns : A string. Caller must free it. - * NULL on out-of-memory error. - * - *********************************************************************/ -char *current_action_to_html(const struct client_state *csp, - const struct current_action_spec *action) -{ - unsigned long flags = action->flags; - struct list_entry * lst; - char *result = strdup(""); - char *active = strdup(""); - char *inactive = strdup(""); - -#define DEFINE_ACTION_BOOL(__name, __bit) \ - if (flags & __bit) \ - { \ - string_append(&active, "\n<br>+"); \ - string_join(&active, add_help_link(__name, csp->config)); \ - } \ - else \ - { \ - string_append(&inactive, "\n<br>-"); \ - string_join(&inactive, add_help_link(__name, csp->config)); \ - } - -#define DEFINE_ACTION_STRING(__name, __bit, __index) \ - if (flags & __bit) \ - { \ - string_append(&active, "\n<br>+"); \ - string_join(&active, add_help_link(__name, csp->config)); \ - string_append(&active, "{"); \ - string_join(&active, html_encode(action->string[__index])); \ - string_append(&active, "}"); \ - } \ - else \ - { \ - string_append(&inactive, "\n<br>-"); \ - string_join(&inactive, add_help_link(__name, csp->config)); \ - } - -#define DEFINE_ACTION_MULTI(__name, __index) \ - lst = action->multi[__index]->first; \ - if (lst == NULL) \ - { \ - string_append(&inactive, "\n<br>-"); \ - string_join(&inactive, add_help_link(__name, csp->config)); \ - } \ - else \ - { \ - while (lst) \ - { \ - string_append(&active, "\n<br>+"); \ - string_join(&active, add_help_link(__name, csp->config)); \ - string_append(&active, "{"); \ - string_join(&active, html_encode(lst->str)); \ - string_append(&active, "}"); \ - lst = lst->next; \ - } \ - } - -#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */ - -#include "actionlist.h" - -#undef DEFINE_ACTION_MULTI -#undef DEFINE_ACTION_STRING -#undef DEFINE_ACTION_BOOL -#undef DEFINE_ACTION_ALIAS - - if (active != NULL) - { - string_append(&result, active); - freez(active); - } - string_append(&result, "\n<br>"); - if (inactive != NULL) - { - string_append(&result, inactive); - freez(inactive); - } - return result; -} diff --git a/external/privoxy/actions.h b/external/privoxy/actions.h deleted file mode 100644 index 733a853..0000000 --- a/external/privoxy/actions.h +++ /dev/null @@ -1,187 +0,0 @@ -#ifndef ACTIONS_H_INCLUDED -#define ACTIONS_H_INCLUDED -#define ACTIONS_H_VERSION "$Id: actions.h,v 1.18 2008/03/30 14:52:00 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/actions.h,v $ - * - * Purpose : Declares functions to work with actions files - * Functions declared include: FIXME - * - * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: actions.h,v $ - * Revision 1.18 2008/03/30 14:52:00 fabiankeil - * Rename load_actions_file() and load_re_filterfile() - * as they load multiple files "now". - * - * Revision 1.17 2008/01/28 20:17:40 fabiankeil - * - Mark some parameters as immutable. - * - Hide update_action_bits_for_all_tags() while it's unused. - * - * Revision 1.16 2007/04/17 18:21:45 fabiankeil - * Split update_action_bits() into - * update_action_bits_for_all_tags() - * and update_action_bits_for_tag(). - * - * Revision 1.15 2007/04/15 16:39:20 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.14 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.12 2002/05/06 07:56:50 oes - * Made actions_to_html independent of FEATURE_CGI_EDIT_ACTIONS - * - * Revision 1.11 2002/04/30 11:14:52 oes - * Made csp the first parameter in *action_to_html - * - * Revision 1.10 2002/04/26 12:53:33 oes - * - actions_to_html signature change - * - current_action_to_text: renamed to current_action_to_html - * and signature change - * - * Revision 1.9 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.8 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.7 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.6 2001/10/23 21:30:30 jongfoster - * Adding error-checking to selected functions. - * - * Revision 1.5 2001/10/14 21:58:22 jongfoster - * Adding support for the CGI-based editor: - * - Exported get_actions() - * - Added new function free_alias_list() - * - Added support for {{settings}} and {{description}} blocks - * in the actions file. They are currently ignored. - * - Added restriction to only one {{alias}} block which must appear - * first in the file, to simplify the editor's rewriting rules. - * - Note that load_actions_file() is no longer used by the CGI-based - * editor, but some of the other routines in this file are. - * - * Revision 1.4 2001/09/16 15:47:37 jongfoster - * First version of CGI-based edit interface. This is very much a - * work-in-progress, and you can't actually use it to edit anything - * yet. You must #define FEATURE_CGI_EDIT_ACTIONS for these changes - * to have any effect. - * - * Revision 1.3 2001/09/14 00:17:32 jongfoster - * Tidying up memory allocation. New function init_action(). - * - * Revision 1.2 2001/07/29 19:01:11 jongfoster - * Changed _FILENAME_H to FILENAME_H_INCLUDED. - * Added forward declarations for needed structures. - * - * Revision 1.1 2001/05/31 21:16:46 jongfoster - * Moved functions to process the action list into this new file. - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - - -struct action_spec; -struct current_action_spec; -struct client_state; - - - -/* This structure is used to hold user-defined aliases */ -struct action_alias -{ - const char * name; - struct action_spec action[1]; - struct action_alias * next; -}; - - -extern jb_err get_actions (char *line, - struct action_alias * alias_list, - struct action_spec *cur_action); -extern void free_alias_list(struct action_alias *alias_list); - -extern void init_action(struct action_spec *dest); -extern void free_action(struct action_spec *src); -extern jb_err merge_actions (struct action_spec *dest, - const struct action_spec *src); -#if 0 -extern int update_action_bits_for_all_tags(struct client_state *csp); -#endif -extern int update_action_bits_for_tag(struct client_state *csp, const char *tag); -extern jb_err copy_action (struct action_spec *dest, - const struct action_spec *src); -extern char * actions_to_text (const struct action_spec *action); -extern char * actions_to_html (const struct client_state *csp, - const struct action_spec *action); -extern void init_current_action (struct current_action_spec *dest); -extern void free_current_action (struct current_action_spec *src); -extern jb_err merge_current_action (struct current_action_spec *dest, - const struct action_spec *src); -extern char * current_action_to_html(const struct client_state *csp, - const struct current_action_spec *action); - -extern jb_err get_action_token(char **line, char **name, char **value); -extern void unload_actions_file(void *file_data); -extern int load_action_files(struct client_state *csp); - -#ifdef FEATURE_GRACEFUL_TERMINATION -void unload_current_actions_file(void); -#endif - - -/* Revision control strings from this header and associated .c file */ -extern const char actions_rcs[]; -extern const char actions_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef ACTIONS_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ - diff --git a/external/privoxy/amiga.c b/external/privoxy/amiga.c deleted file mode 100644 index 68193fb..0000000 --- a/external/privoxy/amiga.c +++ /dev/null @@ -1,341 +0,0 @@ -const char amiga_rcs[] = "$Id: amiga.c,v 1.12 2007/01/07 07:40:52 joergs Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/amiga.c,v $ - * - * Purpose : Amiga-specific declarations. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: amiga.c,v $ - * Revision 1.12 2007/01/07 07:40:52 joergs - * Added AmigaOS4 support and made it work on AmigaOS 3.x with current sources. - * - * Revision 1.11 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.9 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.8 2002/03/25 19:32:15 joergs - * Name in version string changed from junkbuster to Privoxy. - * - * Revision 1.7 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.6 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.5 2002/03/03 09:18:03 joergs - * Made jumbjuster work on AmigaOS again. - * - * Revision 1.4 2001/10/07 15:35:13 oes - * Replaced 6 boolean members of csp with one bitmap (csp->flags) - * - * Revision 1.3 2001/09/12 22:54:51 joergs - * Stacksize of main thread increased. - * - * Revision 1.2 2001/05/23 00:13:58 joergs - * AmigaOS support fixed. - * - * Revision 1.1.1.1 2001/05/15 13:58:46 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#ifdef AMIGA - -#include <stdio.h> -#include <signal.h> - -#include "project.h" - -const char amiga_h_rcs[] = AMIGA_H_VERSION; - -static char *ver USED = "$VER: Privoxy " __AMIGAVERSION__ " (" __AMIGADATE__ ")"; -#ifdef __amigaos4__ -static char *stack USED = "$STACK: 524288"; -#else -unsigned long __stack = 100*1024; -#endif -struct Task *main_task = NULL; -int childs = 0; - -void serve(struct client_state *csp); - -SAVEDS ULONG server_thread(void) -{ - struct client_state *local_csp; - struct UserData UserData; - struct Task *me=FindTask(NULL); -#ifdef __amigaos4__ - struct Library *SocketBase; -#endif - - Wait(SIGF_SINGLE); - local_csp=(struct client_state *)(me->tc_UserData); - me->tc_UserData=&UserData; - SocketBase=(APTR)OpenLibrary("bsdsocket.library",3); - if (SocketBase) -#ifdef __amigaos4__ - { - ISocket = (struct SocketIFace *)GetInterface(SocketBase, "main", 1, NULL); - } - if (ISocket) -#endif - { - SetErrnoPtr(&(UserData.eno),sizeof(int)); - local_csp->cfd=ObtainSocket(local_csp->cfd, AF_INET, SOCK_STREAM, 0); - if(JB_INVALID_SOCKET!=local_csp->cfd) - { - Signal(main_task,SIGF_SINGLE); - serve((struct client_state *) local_csp); - } else { - local_csp->flags &= ~CSP_FLAG_ACTIVE; - Signal(main_task,SIGF_SINGLE); - } -#ifdef __amigaos4__ - DropInterface((struct Interface *)ISocket); -#endif - CloseLibrary(SocketBase); - } else { -#ifdef __amigaos4__ - CloseLibrary(SocketBase); -#endif - local_csp->flags &= ~CSP_FLAG_ACTIVE; - Signal(main_task,SIGF_SINGLE); - } - childs--; - return 0; -} - -static BPTR olddir; - -void amiga_exit(void) -{ -#ifdef __amigaos4__ - if (ISocket) -#else - if (SocketBase) -#endif - { -#ifdef __amigaos4__ - struct Library *SocketBase = ISocket->Data.LibBase; - DropInterface((struct Interface *)ISocket); -#endif - CloseLibrary(SocketBase); - } - CurrentDir(olddir); -} - -#ifndef __amigaos4__ -static struct SignalSemaphore memsem; -static struct SignalSemaphore *memsemptr = NULL; -#endif -static struct UserData GlobalUserData; - -void InitAmiga(void) -{ -#ifdef __amigaos4__ - struct Library *SocketBase; -#endif - - main_task = FindTask(NULL); - main_task->tc_UserData = &GlobalUserData; - - if (((struct Library *)SysBase)->lib_Version < 39) - { - exit(RETURN_FAIL); - } - - signal(SIGINT,SIG_IGN); - SocketBase = (APTR)OpenLibrary("bsdsocket.library",3); -#ifdef __amigaos4__ - if (SocketBase) - { - ISocket = (struct SocketIFace *)GetInterface(SocketBase, "main", 1, NULL); - } - if (!ISocket) -#else - if (!SocketBase) -#endif - { -#ifdef __amigaos4__ - CloseLibrary(SocketBase); -#endif - fprintf(stderr, "Can't open bsdsocket.library V3+\n"); - exit(RETURN_ERROR); - } - SetErrnoPtr(&(GlobalUserData.eno),sizeof(int)); -#ifndef __amigaos4__ - InitSemaphore(&memsem); - memsemptr = &memsem; -#endif - - olddir=CurrentDir(GetProgramDir()); - atexit(amiga_exit); -} - -#ifndef __amigaos4__ -#ifdef __GNUC__ -#ifdef libnix -/* multithreadingsafe libnix replacements */ -static void *memPool=NULL; - -void *malloc (size_t s) -{ - ULONG *mem; - LONG size = s; - - if (size<=0) - { - return NULL; - } - if (!memPool) - { - if (!(memPool=CreatePool(MEMF_ANY,32*1024,8*1024))) - { - return NULL; - } - } - size += sizeof(ULONG) + MEM_BLOCKMASK; - size &= ~MEM_BLOCKMASK; - if (memsemptr) - { - ObtainSemaphore(memsemptr); - } - if ((mem=AllocPooled(memPool,size))) - { - *mem++=size; - } - if (memsemptr) - { - ReleaseSemaphore(memsemptr); - } - return mem; -} - -void free (void *m) -{ - ULONG *mem = m; - - if(mem && memPool) - { - ULONG size=*--mem; - - if (memsemptr) - { - ObtainSemaphore(memsemptr); - } - FreePooled(memPool,mem,size); - if (memsemptr) - { - ReleaseSemaphore(memsemptr); - } - } -} - -void *realloc (void *old, size_t ns) -{ - void *new; - LONG osize, *o = old; - LONG nsize = ns; - - if (!old) - { - return malloc(nsize); - } - osize = (*(o-1)) - sizeof(ULONG); - if (nsize <= osize) - { - return old; - } - if ((new = malloc(nsize))) - { - ULONG *n = new; - - osize >>= 2; - while(osize--) - { - *n++ = *o++; - } - free(old); - } - return new; -} - -void __memCleanUp (void) -{ - if (memsemptr) - { - ObtainSemaphore(memsemptr); - } - if (memPool) - { - DeletePool(memPool); - } - if (memsemptr) - { - ReleaseSemaphore(memsemptr); - } -} - -#define ADD2LIST(a,b,c) asm(".stabs \"_" #b "\"," #c ",0,0,_" #a ) -#define ADD2EXIT(a,pri) ADD2LIST(a,__EXIT_LIST__,22); \ - asm(".stabs \"___EXIT_LIST__\",20,0,0," #pri "+128") -ADD2EXIT(__memCleanUp,-50); -#elif !defined(ixemul) -#error No libnix and no ixemul!? -#endif /* libnix */ -#else -#error Only GCC is supported, multithreading safe malloc/free required. -#endif /* __GNUC__ */ -#endif /* !__amigaos4__ */ - -#endif /* def AMIGA */ diff --git a/external/privoxy/amiga.h b/external/privoxy/amiga.h deleted file mode 100644 index 43ebda6..0000000 --- a/external/privoxy/amiga.h +++ /dev/null @@ -1,176 +0,0 @@ -#ifdef AMIGA -#ifndef AMIGA_H_INCLUDED -#define AMIGA_H_INCLUDED -#define AMIGA_H_VERSION "$Id: amiga.h,v 1.12 2007/01/07 07:40:52 joergs Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/amiga.h,v $ - * - * Purpose : Amiga-specific declarations. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: amiga.h,v $ - * Revision 1.12 2007/01/07 07:40:52 joergs - * Added AmigaOS4 support and made it work on AmigaOS 3.x with current sources. - * - * Revision 1.11 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.9 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.8 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.7 2002/03/03 09:18:03 joergs - * Made jumbjuster work on AmigaOS again. - * - * Revision 1.6 2001/10/13 12:46:08 joergs - * Added #undef EINTR to avoid warnings - * - * Revision 1.5 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.4 2001/05/29 20:05:06 joergs - * Fixed exit() macro not exiting if called before InitAmiga() - * (junkbuster --help and --version). - * - * Revision 1.3 2001/05/25 21:53:27 jongfoster - * Fixing indentation - * - * Revision 1.2 2001/05/23 00:13:58 joergs - * AmigaOS support fixed. - * - * Revision 1.1.1.1 2001/05/15 13:58:46 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#define _KERNEL -#include <sys/socket.h> -#undef _KERNEL - -#define __NOLIBBASE__ -#define __NOGLOBALIFACE__ -#include <proto/socket.h> -#undef __NOLIBBASE__ -#undef __NOGLOBALIFACE__ - -#define __CONSTLIBBASEDECL__ const -#include <proto/exec.h> -#include <exec/tasks.h> -#include <proto/dos.h> -#include <dos/dostags.h> - -struct UserData -{ -#ifdef __amigaos4__ - struct SocketIFace *si; -#else - struct Library *sb; -#endif - int eno; -}; - -#ifdef __amigaos4__ -#define ISocket (((struct UserData *)(FindTask(NULL)->tc_UserData))->si) -#undef errno -#else -#define SocketBase ((struct Library *)(((struct UserData *)(FindTask(NULL)->tc_UserData))->sb)) -#endif -#define errno (((struct UserData *)(FindTask(NULL)->tc_UserData))->eno) -#define select(a,b,c,d,e) WaitSelect(a,b,c,d,e,NULL) -#define inet_ntoa(x) Inet_NtoA(x.s_addr) - -extern int childs; -extern struct Task *main_task; - -void InitAmiga(void); -void amiga_exit(void); -void __memCleanUp(void); -SAVEDS ULONG server_thread(void); - -#ifdef __amigaos4__ -#define exit(x) \ -{ \ - if(main_task) \ - { \ - if(main_task == FindTask(NULL)) \ - { \ - while(childs) Delay(10*TICKS_PER_SECOND); exit(x); \ - } \ - else \ - { \ - if (ISocket) \ - { \ - struct Library *sb = ISocket->Data.LibBase; \ - DropInterface((struct Interface *)ISocket); \ - CloseLibrary(sb); \ - } \ - childs--; \ - RemTask(NULL); \ - } \ - } \ - else \ - { \ - exit(x); \ - } \ -} -#else -#define exit(x) \ -{ \ - if(main_task) \ - { \ - if(main_task == FindTask(NULL)) \ - { \ - while(childs) Delay(10*TICKS_PER_SECOND); exit(x); \ - } \ - else \ - { \ - CloseLibrary(SocketBase); \ - childs--; \ - RemTask(NULL); \ - } \ - } \ - else \ - { \ - exit(x); \ - } \ -} - -#undef HAVE_RANDOM -#define h_errno 0 -#define HAVE_TIMEGM -#define timegm(tm) mktime(tm) -#endif /* __amigaos4__ */ - -#undef EINTR -#define EINTR 0 - -#endif /* ndef AMIGA_H_INCLUDED */ -#endif /* def AMIGA */ diff --git a/external/privoxy/cgi.c b/external/privoxy/cgi.c deleted file mode 100644 index 61ff069..0000000 --- a/external/privoxy/cgi.c +++ /dev/null @@ -1,2987 +0,0 @@ -const char cgi_rcs[] = "$Id: cgi.c,v 1.116 2009/03/15 14:59:34 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/cgi.c,v $ - * - * Purpose : Declares functions to intercept request, generate - * html or gif answers, and to compose HTTP resonses. - * This only contains the framework functions, the - * actual handler functions are declared elsewhere. - * - * Functions declared include: - * - * - * Copyright : Written by and Copyright (C) 2001-2004, 2006-2008 - * the SourceForge Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: cgi.c,v $ - * Revision 1.116 2009/03/15 14:59:34 fabiankeil - * Cosmetics. - * - * Revision 1.115 2009/03/01 18:28:23 fabiankeil - * Help clang understand that we aren't dereferencing - * NULL pointers here. - * - * Revision 1.114 2008/12/04 18:15:04 fabiankeil - * Fix some cparser warnings. - * - * Revision 1.113 2008/09/04 08:13:58 fabiankeil - * Prepare for critical sections on Windows by adding a - * layer of indirection before the pthread mutex functions. - * - * Revision 1.112 2008/08/31 16:08:12 fabiankeil - * "View the request headers" isn't more equal than the other - * menu items and thus doesn't need a trailing dot either. - * - * Revision 1.111 2008/08/31 15:59:02 fabiankeil - * There's no reason to let remote toggling support depend - * on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't. - * - * Revision 1.110 2008/08/31 14:55:43 fabiankeil - * Add a @date@ symbol to include a date(1)-like time string - * in templates. Modified version of the patch Endre Szabo - * submitted in #2026468. - * - * Revision 1.109 2008/07/26 09:40:27 fabiankeil - * Remove the unconditional block in get_http_time(). - * It's pointless now that it's no longer used to limit - * dummy's scope. While at it, remove obvious comments - * and a trailing space. - * - * Revision 1.108 2008/05/26 17:30:53 fabiankeil - * Provide an OpenSearch Description to access the - * show-url-info page through "search engine plugins". - * - * Revision 1.107 2008/05/26 16:23:19 fabiankeil - * - Fix spelling in template-not-found message. - * - Declare referrer_is_safe()'s alternative_prefix[] static. - * - * Revision 1.106 2008/05/21 15:24:38 fabiankeil - * Mark csp as immutable for a bunch of functions. - * - * Revision 1.105 2008/04/17 14:40:47 fabiankeil - * Provide get_http_time() with the buffer size so it doesn't - * have to blindly assume that the buffer is big enough. - * - * Revision 1.104 2008/03/26 18:07:06 fabiankeil - * Add hostname directive. Closes PR#1918189. - * - * Revision 1.103 2008/03/21 11:13:57 fabiankeil - * Only gather host information if it's actually needed. - * Also move the code out of accept_connection() so it's less likely - * to delay other incoming connections if the host is misconfigured. - * - * Revision 1.102 2008/02/23 16:33:43 fabiankeil - * Let forward_url() use the standard parameter ordering - * and mark its second parameter immutable. - * - * Revision 1.101 2008/02/03 15:45:06 fabiankeil - * Add SOCKS5 support for "Forwarding failure" CGI page. - * - * Revision 1.100 2007/10/17 18:40:53 fabiankeil - * - Send CGI pages as HTTP/1.1 unless the client asked for HTTP/1.0. - * - White space fix. - * - * Revision 1.99 2007/08/05 13:42:22 fabiankeil - * #1763173 from Stefan Huehner: declare some more functions static. - * - * Revision 1.98 2007/05/14 10:33:51 fabiankeil - * - Use strlcpy() and strlcat() instead of strcpy() and strcat(). - * - * Revision 1.97 2007/04/09 18:11:35 fabiankeil - * Don't mistake VC++'s _snprintf() for a snprintf() replacement. - * - * Revision 1.96 2007/03/08 17:41:05 fabiankeil - * Use sizeof() more often. - * - * Revision 1.95 2007/02/10 17:01:37 fabiankeil - * Don't overlook map result for the forwarding-type. - * - * Revision 1.94 2007/02/08 19:44:49 fabiankeil - * Use a transparent background for the PNG replacement pattern. - * - * Revision 1.93 2007/02/07 10:45:22 fabiankeil - * - Save the reason for generating http_responses. - * - Fix --disable-toggle (again). - * - Use TBL birthday hack for 403 responses as well. - * - Uglify the @menu@ again to fix JavaScript - * errors on the "blocked" template. - * - Escape an ampersand in cgi_error_unknown(). - * - * Revision 1.92 2007/01/28 13:41:17 fabiankeil - * - Add HEAD support to finish_http_response. - * - Add error favicon to internal HTML error messages. - * - * Revision 1.91 2007/01/27 13:09:16 fabiankeil - * Add new config option "templdir" to - * change the templates directory. - * - * Revision 1.90 2007/01/25 13:47:26 fabiankeil - * Added "forwarding-failed" template support for error_response(). - * - * Revision 1.89 2007/01/23 15:51:16 fabiankeil - * Add favicon delivery functions. - * - * Revision 1.88 2007/01/23 13:14:32 fabiankeil - * - Map variables that aren't guaranteed to be - * pure ASCII html_encoded. - * - Use CGI_PREFIX to generate URL for user manual - * CGI page to make sure CGI_SITE_2_PATH is included. - * - * Revision 1.87 2007/01/22 15:34:13 fabiankeil - * - "Protect" against a rather lame JavaScript-based - * Privoxy detection "attack" and check the referrer - * before delivering the CGI style sheet. - * - Move referrer check for unsafe CGI pages into - * referrer_is_safe() and log the result. - * - Map @url@ in cgi-error-disabled page. - * It's required for the "go there anyway" link. - * - Mark *csp as immutable for grep_cgi_referrer(). - * - * Revision 1.86 2007/01/09 11:54:26 fabiankeil - * Fix strdup() error handling in cgi_error_unknown() - * and cgi_error_no_template(). Reported by Markus Elfring. - * - * Revision 1.85 2007/01/05 14:19:02 fabiankeil - * Handle pcrs_execute() errors in template_fill() properly. - * - * Revision 1.84 2006/12/28 17:54:22 fabiankeil - * Fixed gcc43 conversion warnings and replaced sprintf - * calls with snprintf to give OpenBSD's gcc one less reason - * to complain. - * - * Revision 1.83 2006/12/17 19:35:19 fabiankeil - * Escape ampersand in Privoxy menu. - * - * Revision 1.82 2006/12/17 17:53:39 fabiankeil - * Suppress the toggle link if remote toggling is disabled. - * - * Revision 1.81 2006/12/09 13:49:16 fabiankeil - * Fix configure option --disable-toggle. - * Thanks to Peter Thoenen for reporting this. - * - * Revision 1.80 2006/12/08 14:45:32 fabiankeil - * Don't lose the FORCE_PREFIX in case of - * connection problems. Fixes #612235. - * - * Revision 1.79 2006/11/13 19:05:50 fabiankeil - * Make pthread mutex locking more generic. Instead of - * checking for OSX and OpenBSD, check for FEATURE_PTHREAD - * and use mutex locking unless there is an _r function - * available. Better safe than sorry. - * - * Fixes "./configure --disable-pthread" and should result - * in less threading-related problems on pthread-using platforms, - * but it still doesn't fix BR#1122404. - * - * Revision 1.78 2006/09/21 19:22:07 fabiankeil - * Use CGI_PREFIX to check the referrer. - * The check for "http://config.privoxy.org/" fails - * if the user modified CGI_SITE_2_HOST. - * - * Revision 1.77 2006/09/21 15:17:23 fabiankeil - * Adjusted headers for Privoxy's cgi responses: - * Don't set Last-Modified, Expires and Cache-Control - * headers for redirects; always set "Connection: close". - * - * Revision 1.76 2006/09/07 14:06:38 fabiankeil - * Only predate the Last-Modified header for cgi responses - * that are delivered with status code 404 or 503. - * - * Revision 1.75 2006/09/07 11:56:39 fabiankeil - * Mark cgi_send_user_manual as harmless, - * to fix the access denied problem Hal spotted. - * The manual has no secret content, therefore we - * don't have to care about "secure" referrers. - * - * Revision 1.74 2006/09/06 18:45:03 fabiankeil - * Incorporate modified version of Roland Rosenfeld's patch to - * optionally access the user-manual via Privoxy. Closes patch 679075. - * - * Formatting changed to Privoxy style, added call to - * cgi_error_no_template if the requested file doesn't - * exist and modified check whether or not Privoxy itself - * should serve the manual. Should work cross-platform now. - * - * Revision 1.73 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.72 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.70.2.13 2004/02/17 13:30:23 oes - * Moved cgi_error_disabled() from cgiedit.c to - * cgi.c to re-enable build with --disable-editor. - * Fixes Bug #892744. Thanks to Matthew Fischer - * for spotting. - * - * Revision 1.70.2.12 2003/12/17 16:33:16 oes - * - Added new function cgi_redirect to handle creation of - * HTTP redirect messages formerly repeated in the code. - * - Send cgi_error_disabled instead of cgi_error_404 when - * referrer check fails - * - Dynamic content now gets Expires header field with date - * in the past - * - * Revision 1.70.2.11 2003/10/23 12:29:26 oes - * Bugfix: Transparent PNG was not transparent. Thanks to - * Dan Razzell of Starfish Systems for notice and new PNG. - * - * Revision 1.70.2.10 2003/06/06 07:54:25 oes - * Security fix: dspatch_known_cgi no longer considers an empty - * referrer safe for critical CGIs, since malicious links could - * reside on https:// locations which browsers don't advertize as - * referrers. Closes bug #749916, thanks to Jeff Epler for the - * hint. Goodbye One-Click[tm] toggling :-( - * - * Revision 1.70.2.9 2003/05/08 15:11:31 oes - * Nit - * - * Revision 1.70.2.8 2003/04/29 13:33:51 oes - * Killed a compiler warning on OSX - * - * Revision 1.70.2.7 2003/04/03 13:50:58 oes - * - Don't call cgi_error_disabled ifndef FEATURE_CGI_EDIT_ACTIONS - * (fixes bug #710056) - * - Show toggle info only if we have it - * - * Revision 1.70.2.6 2003/03/12 01:26:25 david__schmidt - * Move declaration of struct tm dummy outside of a control block so it is - * accessible later on during snprintf in get_http_time. - * - * Revision 1.70.2.5 2003/03/11 11:53:58 oes - * Cosmetic: Renamed cryptic variable - * - * Revision 1.70.2.4 2003/03/07 03:41:03 david__schmidt - * Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX. Hopefully this will take care of all of those pesky crash reports. - * - * Revision 1.70.2.3 2002/11/28 18:14:32 oes - * Disable access to critical CGIs via untrusted referrers. - * This prevents users from being tricked by malicious websites - * into making unintentional configuration changes: - * - * - Added flag to each cgi_dispatcher that allows or denies - * external linking - * - Introduced proviorical function that greps for the - * referrer header before regular header parsing happens - * - Added safety check to dispatch_known_cgi. CGI is called - * if (cgi harmless || no referrer || we are referrer). - * Else a) toggle calls are modified not to change status and - * b) all other calls are denied. - * - * Revision 1.70.2.2 2002/11/12 16:20:37 oes - * Added missing #ifdef FEATURE_TOGGLE around g_bToggleIJB; fixes bug #636651 - * - * Revision 1.70.2.1 2002/08/05 11:17:46 oes - * Fixed Bug #587820, i.e. added workaround for IE bug that includes fragment identifier in (cgi) query - * - * Revision 1.70 2002/05/19 11:33:20 jongfoster - * If a CGI error was not handled, and propogated back to - * dispatch_known_cgi(), then it was assumed to be "out of memory". - * This gave a very misleading error message. - * - * Now other errors will cause a simple message giving the error - * number and asking the user to report a bug. - * - * Bug report: - * http://sourceforge.net/tracker/index.php?func=detail - * &aid=557905&group_id=11118&atid=111118 - * - * Revision 1.69 2002/05/14 21:28:40 oes - * - Fixed add_help_link to link to the (now split) actions - * part of the config chapter - * - Renamed helplink export to actions-help-prefix - * - * Revision 1.68 2002/05/12 21:36:29 jongfoster - * Correcting function comments - * - * Revision 1.67 2002/04/30 12:02:07 oes - * Nit: updated a comment - * - * Revision 1.66 2002/04/26 18:32:57 jongfoster - * Fixing a memory leak on error - * - * Revision 1.65 2002/04/26 12:53:51 oes - * - New function add_help_link - * - default_exports now exports links to the user manual - * and a prefix for links into the config chapter - * - * Revision 1.64 2002/04/24 02:17:21 oes - * - Better descriptions for CGIs - * - Hide edit-actions, more shortcuts - * - Moved get_char_param, get_string_param and get_number_param here - * from cgiedit.c - * - * Revision 1.63 2002/04/15 19:06:43 jongfoster - * Typos - * - * Revision 1.62 2002/04/10 19:59:46 jongfoster - * Fixes to #include in templates: - * - Didn't close main file if loading an included template fails. - * - I'm paranoid and want to disallow "#include /etc/passwd". - * - * Revision 1.61 2002/04/10 13:37:48 oes - * Made templates modular: template_load now recursive with max depth 1 - * - * Revision 1.60 2002/04/08 20:50:25 swa - * fixed JB spelling - * - * Revision 1.59 2002/04/05 15:51:51 oes - * - added send-stylesheet CGI - * - bugfix: error-pages now get correct request protocol - * - fixed - * - kludged CGI descriptions and menu not to break JS syntax - * - * Revision 1.58 2002/03/29 03:33:13 david__schmidt - * Fix Mac OSX compiler warnings - * - * Revision 1.57 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.56 2002/03/24 17:50:46 jongfoster - * Fixing compile error if actions file editor disabled - * - * Revision 1.55 2002/03/24 16:55:06 oes - * Making GIF checkerboard transparent - * - * Revision 1.54 2002/03/24 16:18:15 jongfoster - * Removing old logo - * - * Revision 1.53 2002/03/24 16:06:00 oes - * Correct transparency for checkerboard PNG. Thanks, Magnus! - * - * Revision 1.52 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.51 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.50 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.49 2002/03/13 00:27:04 jongfoster - * Killing warnings - * - * Revision 1.48 2002/03/08 17:47:07 jongfoster - * Adding comments - * - * Revision 1.47 2002/03/08 16:41:33 oes - * Added GIF images again - * - * Revision 1.46 2002/03/07 03:48:38 oes - * - Changed built-in images from GIF to PNG - * (with regard to Unisys patent issue) - * - Added a 4x4 pattern PNG which is less intrusive - * than the logo but also clearly marks the deleted banners - * - * Revision 1.45 2002/03/06 22:54:35 jongfoster - * Automated function-comment nitpicking. - * - * Revision 1.44 2002/03/05 22:43:45 david__schmidt - * - Better error reporting on OS/2 - * - Fix double-slash comment (oops) - * - * Revision 1.43 2002/03/05 21:33:45 david__schmidt - * - Re-enable OS/2 building after new parms were added - * - Fix false out of memory report when resolving CGI templates when no IP - * address is available of failed attempt (a la no such domain) - * - * Revision 1.42 2002/01/21 00:33:20 jongfoster - * Replacing strsav() with the safer string_append() or string_join(). - * Adding map_block_keep() to save a few bytes in the edit-actions-list HTML. - * Adding missing html_encode() to error message generators. - * Adding edit-actions-section-swap and many "shortcuts" to the list of CGIs. - * - * Revision 1.41 2002/01/17 20:56:22 jongfoster - * Replacing hard references to the URL of the config interface - * with #defines from project.h - * - * Revision 1.40 2002/01/09 14:26:46 oes - * Added support for thread-safe gmtime_r call. - * - * Revision 1.39 2001/11/16 00:48:13 jongfoster - * Fixing a compiler warning - * - * Revision 1.38 2001/11/13 00:31:21 jongfoster - * - Adding new CGIs for use by non-JavaScript browsers: - * edit-actions-url-form - * edit-actions-add-url-form - * edit-actions-remove-url-form - * - Fixing make_menu()'s HTML generation - it now quotes the href parameter. - * - Fixing || bug. - * - * Revision 1.37 2001/11/01 14:28:47 david__schmidt - * Show enablement/disablement status in almost all templates. - * There is a little trickiness here: apparent recursive resolution of - * @if-enabled-then@ caused the toggle template to show status out-of-phase with - * the actual enablement status. So a similar construct, - * @if-enabled-display-then@, is used to resolve the status display on non-'toggle' - * templates. - * - * Revision 1.36 2001/10/26 17:33:27 oes - * marginal bugfix - * - * Revision 1.35 2001/10/23 21:48:19 jongfoster - * Cleaning up error handling in CGI functions - they now send back - * a HTML error page and should never cause a FATAL error. (Fixes one - * potential source of "denial of service" attacks). - * - * CGI actions file editor that works and is actually useful. - * - * Ability to toggle Junkbuster remotely using a CGI call. - * - * You can turn off both the above features in the main configuration - * file, e.g. if you are running a multi-user proxy. - * - * Revision 1.34 2001/10/18 22:22:09 david__schmidt - * Only show "Local support" on templates conditionally: - * - if either 'admin-address' or 'proxy-info-url' are uncommented in config - * - if not, no Local support section appears - * - * Revision 1.33 2001/10/14 22:28:41 jongfoster - * Fixing stupid typo. - * - * Revision 1.32 2001/10/14 22:20:18 jongfoster - * - Changes to CGI dispatching method to match CGI names exactly, - * rather than doing a prefix match. - * - No longer need to count the length of the CGI handler names by hand. - * - Adding new handler for 404 error when disptching a CGI, if none of - * the handlers match. - * - Adding new handlers for CGI actionsfile editor. - * - * Revision 1.31 2001/10/10 10:56:39 oes - * Failiure to load template now fatal. Before, the user got a hard-to-understand assertion failure from cgi.c - * - * Revision 1.30 2001/10/02 15:30:57 oes - * Introduced show-request cgi - * - * Revision 1.29 2001/09/20 15:47:44 steudten - * - * Fix BUG: Modify int size to size_t size in fill_template() - * - removes big trouble on machines where sizeof(int) != sizeof(size_t). - * - * Revision 1.28 2001/09/19 18:00:37 oes - * - Deletef time() FIXME (Can't fail under Linux either, if - * the argument is guaranteed to be in out address space, - * which it is.) - * - Fixed comments - * - Pointer notation cosmetics - * - Fixed a minor bug in template_fill(): Failiure of - * pcrs_execute() now secure. - * - * Revision 1.27 2001/09/16 17:08:54 jongfoster - * Moving simple CGI functions from cgi.c to new file cgisimple.c - * - * Revision 1.26 2001/09/16 15:47:37 jongfoster - * First version of CGI-based edit interface. This is very much a - * work-in-progress, and you can't actually use it to edit anything - * yet. You must #define FEATURE_CGI_EDIT_ACTIONS for these changes - * to have any effect. - * - * Revision 1.25 2001/09/16 15:02:35 jongfoster - * Adding i.j.b/robots.txt. - * Inlining add_stats() since it's only ever called from one place. - * - * Revision 1.24 2001/09/16 11:38:01 jongfoster - * Splitting fill_template() into 2 functions: - * template_load() loads the file - * template_fill() performs the PCRS regexps. - * This is because the CGI edit interface has a "table row" - * template which is used many times in the page - this - * change means it's only loaded from disk once. - * - * Revision 1.23 2001/09/16 11:16:05 jongfoster - * Better error handling in dispatch_cgi() and parse_cgi_parameters() - * - * Revision 1.22 2001/09/16 11:00:10 jongfoster - * New function alloc_http_response, for symmetry with free_http_response - * - * Revision 1.21 2001/09/13 23:53:03 jongfoster - * Support for both static and dynamically generated CGI pages. - * Correctly setting Last-Modified: and Expires: HTTP headers. - * - * Revision 1.20 2001/09/13 23:40:36 jongfoster - * (Cosmetic only) Indentation correction - * - * Revision 1.19 2001/09/13 23:31:25 jongfoster - * Moving image data to cgi.c rather than cgi.h. - * - * Revision 1.18 2001/08/05 16:06:20 jongfoster - * Modifiying "struct map" so that there are now separate header and - * "map_entry" structures. This means that functions which modify a - * map no longer need to return a pointer to the modified map. - * Also, it no longer reverses the order of the entries (which may be - * important with some advanced template substitutions). - * - * Revision 1.17 2001/08/05 15:57:38 oes - * Adapted finish_http_response to new list_to_text - * - * Revision 1.16 2001/08/01 21:33:18 jongfoster - * Changes to fill_template() that reduce memory usage without having - * an impact on performance. I also renamed some variables so as not - * to clash with the C++ keywords "new" and "template". - * - * Revision 1.15 2001/08/01 21:19:22 jongfoster - * Moving file version information to a separate CGI page. - * - * Revision 1.14 2001/08/01 00:19:03 jongfoster - * New function: map_conditional() for an if-then-else syntax. - * Changing to use new version of show_defines() - * - * Revision 1.13 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.12 2001/07/29 18:47:05 jongfoster - * Adding missing #include "loadcfg.h" - * - * Revision 1.11 2001/07/18 17:24:37 oes - * Changed to conform to new pcrs interface - * - * Revision 1.10 2001/07/13 13:53:13 oes - * Removed all #ifdef PCRS and related code - * - * Revision 1.9 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.8 2001/06/29 13:21:46 oes - * - Cosmetics: renamed and reordered functions, variables, - * texts, improved comments etc - * - * - Removed ij_untrusted_url() The relevant - * info is now part of the "untrusted" page, - * which is generated by filters.c:trust_url() - * - * - Generators of content now call finish_http_response() - * themselves, making jcc.c:chat() a little less - * cluttered - * - * - Removed obsolete "Pragma: no-cache" from our headers - * - * - http_responses now know their head length - * - * - fill_template now uses the new interface to pcrs, so that - * - long jobs (like whole files) no longer have to be assembled - * in a fixed size buffer - * - the new T (trivial) option is used, and the replacement may - * contain Perl syntax backrefs without confusing pcrs - * - * - Introduced default_exports() which generates a set of exports - * common to all CGIs and other content generators - * - * - Introduced convenience function map_block_killer() - * - * - Introduced convenience function make_menu() - * - * - Introduced CGI-like function error_response() which generates - * the "No such domain" and "Connect failed" messages using the - * CGI platform - * - * - cgi_show_url_info: - * - adapted to new CGI features - * - form and answers now generated from same template - * - http:// prefix in URL now OK - * - * - cgi_show_status: - * - adapted to new CGI features - * - no longer uses csp->init_proxy_args - * - * - cgi_default: - * - moved menu generation to make_menu() - * - * - add_stats now writes single export map entries instead - * of a fixed string - * - * - Moved redirect_url() to filters.c - * - * - Fixed mem leak in free_http_response(), map_block_killer(), - * - * - Removed logentry from cancelled commit - * - * Revision 1.7 2001/06/09 10:51:58 jongfoster - * Changing "show URL info" handler to new style. - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.6 2001/06/07 23:05:19 jongfoster - * Removing code related to old forward and ACL files. - * - * Revision 1.5 2001/06/05 19:59:16 jongfoster - * Fixing multiline character string (a GCC-only "feature"), and snprintf (it's _snprintf under VC++). - * - * Revision 1.4 2001/06/04 10:41:52 swa - * show version string of cgi.h and cgi.c - * - * Revision 1.3 2001/06/03 19:12:16 oes - * introduced new cgi handling - * - * No revisions before 1.3 - * - **********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <sys/types.h> -#include <stdlib.h> -#include <ctype.h> -#include <string.h> -#include <limits.h> -#include <assert.h> - -#include "project.h" -#include "cgi.h" -#include "list.h" -#include "encode.h" -#include "ssplit.h" -#include "errlog.h" -#include "filters.h" -#include "miscutil.h" -#include "cgisimple.h" -#include "jbsockets.h" -#if defined(FEATURE_CGI_EDIT_ACTIONS) || defined(FEATURE_TOGGLE) -#include "cgiedit.h" -#endif /* defined(FEATURE_CGI_EDIT_ACTIONS) || defined (FEATURE_TOGGLE) */ -#include "loadcfg.h" -/* loadcfg.h is for global_toggle_state only */ -#ifdef FEATURE_PTHREAD -#include "jcc.h" -/* jcc.h is for mutex semaphore globals only */ -#endif /* def FEATURE_PTHREAD */ -const char cgi_h_rcs[] = CGI_H_VERSION; - -/* - * List of CGI functions: name, handler, description - * Note: Do NOT use single quotes in the description; - * this will break the dynamic "blocked" template! - */ -static const struct cgi_dispatcher cgi_dispatchers[] = { - { "", - cgi_default, - "Privoxy main page", - TRUE }, -#ifdef FEATURE_GRACEFUL_TERMINATION - { "die", - cgi_die, - "<b>Shut down</b> - <em class=\"warning\">Do not deploy this build in a production environment, " - "this is a one click Denial Of Service attack!!!</em>", - FALSE }, -#endif - { "show-status", - cgi_show_status, -#ifdef FEATURE_CGI_EDIT_ACTIONS - "View & change the current configuration", -#else - "View the current configuration", -#endif - TRUE }, - { "show-version", - cgi_show_version, - "View the source code version numbers", - TRUE }, - { "show-request", - cgi_show_request, - "View the request headers", - TRUE }, - { "show-url-info", - cgi_show_url_info, - "Look up which actions apply to a URL and why", - TRUE }, -#ifdef FEATURE_TOGGLE - { "toggle", - cgi_toggle, - "Toggle Privoxy on or off", - FALSE }, -#endif /* def FEATURE_TOGGLE */ -#ifdef FEATURE_CGI_EDIT_ACTIONS - { "edit-actions", /* Edit the actions list */ - cgi_edit_actions, - NULL, FALSE }, - { "eaa", /* Shortcut for edit-actions-add-url-form */ - cgi_edit_actions_add_url_form, - NULL, FALSE }, - { "eau", /* Shortcut for edit-actions-url-form */ - cgi_edit_actions_url_form, - NULL, FALSE }, - { "ear", /* Shortcut for edit-actions-remove-url-form */ - cgi_edit_actions_remove_url_form, - NULL, FALSE }, - { "eal", /* Shortcut for edit-actions-list */ - cgi_edit_actions_list, - NULL, FALSE }, - { "eafu", /* Shortcut for edit-actions-for-url */ - cgi_edit_actions_for_url, - NULL, FALSE }, - { "eas", /* Shortcut for edit-actions-submit */ - cgi_edit_actions_submit, - NULL, FALSE }, - { "easa", /* Shortcut for edit-actions-section-add */ - cgi_edit_actions_section_add, - NULL, FALSE }, - { "easr", /* Shortcut for edit-actions-section-remove */ - cgi_edit_actions_section_remove, - NULL, FALSE }, - { "eass", /* Shortcut for edit-actions-section-swap */ - cgi_edit_actions_section_swap, - NULL, FALSE }, - { "edit-actions-for-url", - cgi_edit_actions_for_url, - NULL, FALSE /* Edit the actions for (a) specified URL(s) */ }, - { "edit-actions-list", - cgi_edit_actions_list, - NULL, TRUE /* Edit the actions list */ }, - { "edit-actions-submit", - cgi_edit_actions_submit, - NULL, FALSE /* Change the actions for (a) specified URL(s) */ }, - { "edit-actions-url", - cgi_edit_actions_url, - NULL, FALSE /* Change a URL pattern in the actionsfile */ }, - { "edit-actions-url-form", - cgi_edit_actions_url_form, - NULL, FALSE /* Form to change a URL pattern in the actionsfile */ }, - { "edit-actions-add-url", - cgi_edit_actions_add_url, - NULL, FALSE /* Add a URL pattern to the actionsfile */ }, - { "edit-actions-add-url-form", - cgi_edit_actions_add_url_form, - NULL, FALSE /* Form to add a URL pattern to the actionsfile */ }, - { "edit-actions-remove-url", - cgi_edit_actions_remove_url, - NULL, FALSE /* Remove a URL pattern from the actionsfile */ }, - { "edit-actions-remove-url-form", - cgi_edit_actions_remove_url_form, - NULL, FALSE /* Form to remove a URL pattern from the actionsfile */ }, - { "edit-actions-section-add", - cgi_edit_actions_section_add, - NULL, FALSE /* Remove a section from the actionsfile */ }, - { "edit-actions-section-remove", - cgi_edit_actions_section_remove, - NULL, FALSE /* Remove a section from the actionsfile */ }, - { "edit-actions-section-swap", - cgi_edit_actions_section_swap, - NULL, FALSE /* Swap two sections in the actionsfile */ }, -#endif /* def FEATURE_CGI_EDIT_ACTIONS */ - { "error-favicon.ico", - cgi_send_error_favicon, - NULL, TRUE /* Sends the favicon image for error pages. */ }, - { "favicon.ico", - cgi_send_default_favicon, - NULL, TRUE /* Sends the default favicon image. */ }, - { "robots.txt", - cgi_robots_txt, - NULL, TRUE /* Sends a robots.txt file to tell robots to go away. */ }, - { "send-banner", - cgi_send_banner, - NULL, TRUE /* Send a built-in image */ }, - { "send-stylesheet", - cgi_send_stylesheet, - NULL, FALSE /* Send templates/cgi-style.css */ }, - { "t", - cgi_transparent_image, - NULL, TRUE /* Send a transparent image (short name) */ }, - { "url-info-osd.xml", - cgi_send_url_info_osd, - NULL, TRUE /* Send templates/url-info-osd.xml */ }, - { "user-manual", - cgi_send_user_manual, - NULL, TRUE /* Send user-manual */ }, - { NULL, /* NULL Indicates end of list and default page */ - cgi_error_404, - NULL, TRUE /* Unknown CGI page */ } -}; - - -/* - * Built-in images for ad replacement - * - * Hint: You can encode your own images like this: - * cat your-image | perl -e 'while (read STDIN, $c, 1) { printf("\\%.3o", unpack("C", $c)); }' - */ - -#ifdef FEATURE_NO_GIFS - -/* - * Checkerboard pattern, as a PNG. - */ -const char image_pattern_data[] = - "\211\120\116\107\015\012\032\012\000\000\000\015\111\110\104" - "\122\000\000\000\004\000\000\000\004\010\006\000\000\000\251" - "\361\236\176\000\000\000\006\142\113\107\104\000\000\000\000" - "\000\000\371\103\273\177\000\000\000\033\111\104\101\124\010" - "\327\143\140\140\140\060\377\377\377\077\003\234\106\341\060" - "\060\230\063\020\124\001\000\161\021\031\241\034\364\030\143" - "\000\000\000\000\111\105\116\104\256\102\140\202"; - -/* - * 1x1 transparant PNG. - */ -const char image_blank_data[] = - "\211\120\116\107\015\012\032\012\000\000\000\015\111\110\104\122" - "\000\000\000\001\000\000\000\001\001\003\000\000\000\045\333\126" - "\312\000\000\000\003\120\114\124\105\377\377\377\247\304\033\310" - "\000\000\000\001\164\122\116\123\000\100\346\330\146\000\000\000" - "\001\142\113\107\104\000\210\005\035\110\000\000\000\012\111\104" - "\101\124\170\001\143\140\000\000\000\002\000\001\163\165\001\030" - "\000\000\000\000\111\105\116\104\256\102\140\202"; -#else - -/* - * Checkerboard pattern, as a GIF. - */ -const char image_pattern_data[] = - "\107\111\106\070\071\141\004\000\004\000\200\000\000\310\310" - "\310\377\377\377\041\376\016\111\040\167\141\163\040\141\040" - "\142\141\156\156\145\162\000\041\371\004\001\012\000\001\000" - "\054\000\000\000\000\004\000\004\000\000\002\005\104\174\147" - "\270\005\000\073"; - -/* - * 1x1 transparant GIF. - */ -const char image_blank_data[] = - "GIF89a\001\000\001\000\200\000\000\377\377\377\000\000" - "\000!\371\004\001\000\000\000\000,\000\000\000\000\001" - "\000\001\000\000\002\002D\001\000;"; -#endif - -const size_t image_pattern_length = sizeof(image_pattern_data) - 1; -const size_t image_blank_length = sizeof(image_blank_data) - 1; - - -static struct http_response cgi_error_memory_response[1]; - -static struct http_response *dispatch_known_cgi(struct client_state * csp, - const char * path); -static struct map *parse_cgi_parameters(char *argstring); - - -/********************************************************************* - * - * Function : dispatch_cgi - * - * Description : Checks if a request URL has either the magical - * hostname CGI_SITE_1_HOST (usually http://p.p/) or - * matches CGI_SITE_2_HOST CGI_SITE_2_PATH (usually - * http://config.privoxy.org/) If so, it passes - * the (rest of the) path onto dispatch_known_cgi, which - * calls the relevant CGI handler function. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : http_response if match, NULL if nonmatch or handler fail - * - *********************************************************************/ -struct http_response *dispatch_cgi(struct client_state *csp) -{ - const char *host = csp->http->host; - const char *path = csp->http->path; - - /* - * Should we intercept ? - */ - - /* Note: "example.com" and "example.com." are equivalent hostnames. */ - - /* Either the host matches CGI_SITE_1_HOST ..*/ - if ( ( (0 == strcmpic(host, CGI_SITE_1_HOST)) - || (0 == strcmpic(host, CGI_SITE_1_HOST "."))) - && (path[0] == '/') ) - { - /* ..then the path will all be for us. Remove leading '/' */ - path++; - } - /* Or it's the host part CGI_SITE_2_HOST, and the path CGI_SITE_2_PATH */ - else if ( ( (0 == strcmpic(host, CGI_SITE_2_HOST )) - || (0 == strcmpic(host, CGI_SITE_2_HOST ".")) ) - && (0 == strncmpic(path, CGI_SITE_2_PATH, strlen(CGI_SITE_2_PATH))) ) - { - /* take everything following CGI_SITE_2_PATH */ - path += strlen(CGI_SITE_2_PATH); - if (*path == '/') - { - /* skip the forward slash after CGI_SITE_2_PATH */ - path++; - } - else if (*path != '\0') - { - /* - * weirdness: URL is /configXXX, where XXX is some string - * Do *NOT* intercept. - */ - return NULL; - } - } - else - { - /* Not a CGI */ - return NULL; - } - - /* - * This is a CGI call. - */ - - return dispatch_known_cgi(csp, path); -} - - -/********************************************************************* - * - * Function : grep_cgi_referrer - * - * Description : Ugly provisorical fix that greps the value of the - * referer HTTP header field out of a linked list of - * strings like found at csp->headers. Will disappear - * in Privoxy 3.1. - * - * FIXME: csp->headers ought to be csp->http->headers - * FIXME: Parsing all client header lines should - * happen right after the request is received! - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : pointer to value (no copy!), or NULL if none found. - * - *********************************************************************/ -static char *grep_cgi_referrer(const struct client_state *csp) -{ - struct list_entry *p; - - for (p = csp->headers->first; p != NULL; p = p->next) - { - if (p->str == NULL) continue; - if (strncmpic(p->str, "Referer: ", 9) == 0) - { - return ((p->str) + 9); - } - } - return NULL; - -} - - -/********************************************************************* - * - * Function : referrer_is_safe - * - * Description : Decides whether we trust the Referer for - * CGI pages which are only meant to be reachable - * through Privoxy's web interface directly. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : TRUE if the referrer is safe, or - * FALSE if the referrer is unsafe or not set. - * - *********************************************************************/ -static int referrer_is_safe(const struct client_state *csp) -{ - char *referrer; - static const char alternative_prefix[] = "http://" CGI_SITE_1_HOST "/"; - - referrer = grep_cgi_referrer(csp); - - if (NULL == referrer) - { - /* No referrer, no access */ - log_error(LOG_LEVEL_ERROR, "Denying access to %s. No referrer found.", - csp->http->url); - } - else if ((0 == strncmp(referrer, CGI_PREFIX, sizeof(CGI_PREFIX)-1) - || (0 == strncmp(referrer, alternative_prefix, strlen(alternative_prefix))))) - { - /* Trustworthy referrer */ - log_error(LOG_LEVEL_CGI, "Granting access to %s, referrer %s is trustworthy.", - csp->http->url, referrer); - - return TRUE; - } - else - { - /* Untrustworthy referrer */ - log_error(LOG_LEVEL_ERROR, "Denying access to %s, referrer %s isn't trustworthy.", - csp->http->url, referrer); - } - - return FALSE; - -} - -/********************************************************************* - * - * Function : dispatch_known_cgi - * - * Description : Processes a CGI once dispatch_cgi has determined that - * it matches one of the magic prefixes. Parses the path - * as a cgi name plus query string, prepares a map that - * maps CGI parameter names to their values, initializes - * the http_response struct, and calls the relevant CGI - * handler function. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : path = Path of CGI, with the CGI prefix removed. - * Should not have a leading "/". - * - * Returns : http_response, or NULL on handler failure or out of - * memory. - * - *********************************************************************/ -static struct http_response *dispatch_known_cgi(struct client_state * csp, - const char * path) -{ - const struct cgi_dispatcher *d; - struct map *param_list; - struct http_response *rsp; - char *query_args_start; - char *path_copy; - jb_err err; - - if (NULL == (path_copy = strdup(path))) - { - return cgi_error_memory(); - } - query_args_start = path_copy; - while (*query_args_start && *query_args_start != '?' && *query_args_start != '/') - { - query_args_start++; - } - if (*query_args_start == '/') - { - *query_args_start++ = '\0'; - if ((param_list = new_map())) - { - map(param_list, "file", 1, url_decode(query_args_start), 0); - } - } - else - { - if (*query_args_start == '?') - { - *query_args_start++ = '\0'; - } - if (NULL == (param_list = parse_cgi_parameters(query_args_start))) - { - free(path_copy); - return cgi_error_memory(); - } - } - - /* - * At this point: - * path_copy = CGI call name - * param_list = CGI params, as map - */ - - /* Get mem for response or fail*/ - if (NULL == (rsp = alloc_http_response())) - { - free(path_copy); - free_map(param_list); - return cgi_error_memory(); - } - - /* - * Find and start the right CGI function - */ - d = cgi_dispatchers; - for (;;) - { - if ((d->name == NULL) || (strcmp(path_copy, d->name) == 0)) - { - /* - * If the called CGI is either harmless, or referred - * from a trusted source, start it. - */ - if (d->harmless || referrer_is_safe(csp)) - { - err = (d->handler)(csp, rsp, param_list); - } - else - { - /* - * Else, modify toggle calls so that they only display - * the status, and deny all other calls. - */ - if (0 == strcmp(path_copy, "toggle")) - { - unmap(param_list, "set"); - err = (d->handler)(csp, rsp, param_list); - } - else - { - err = cgi_error_disabled(csp, rsp); - } - } - - free(path_copy); - free_map(param_list); - - if (err == JB_ERR_CGI_PARAMS) - { - err = cgi_error_bad_param(csp, rsp); - } - if (err && (err != JB_ERR_MEMORY)) - { - /* Unexpected error! Shouldn't get here */ - log_error(LOG_LEVEL_ERROR, "Unexpected CGI error %d in top-level handler. Please file a bug report!", err); - err = cgi_error_unknown(csp, rsp, err); - } - if (!err) - { - /* It worked */ - rsp->reason = RSP_REASON_CGI_CALL; - return finish_http_response(csp, rsp); - } - else - { - /* Error in handler, probably out-of-memory */ - free_http_response(rsp); - return cgi_error_memory(); - } - } - d++; - } -} - - -/********************************************************************* - * - * Function : parse_cgi_parameters - * - * Description : Parse a URL-encoded argument string into name/value - * pairs and store them in a struct map list. - * - * Parameters : - * 1 : argstring = string to be parsed. Will be trashed. - * - * Returns : pointer to param list, or NULL if out of memory. - * - *********************************************************************/ -static struct map *parse_cgi_parameters(char *argstring) -{ - char *p; - char *vector[BUFFER_SIZE]; - int pairs, i; - struct map *cgi_params; - - if (NULL == (cgi_params = new_map())) - { - return NULL; - } - - /* - * IE 5 does, of course, violate RFC 2316 Sect 4.1 and sends - * the fragment identifier along with the request, so we must - * cut it off here, so it won't pollute the CGI params: - */ - if (NULL != (p = strchr(argstring, '#'))) - { - *p = '\0'; - } - - pairs = ssplit(argstring, "&", vector, SZ(vector), 1, 1); - - for (i = 0; i < pairs; i++) - { - if ((NULL != (p = strchr(vector[i], '='))) && (*(p+1) != '\0')) - { - *p = '\0'; - if (map(cgi_params, url_decode(vector[i]), 0, url_decode(++p), 0)) - { - free_map(cgi_params); - return NULL; - } - } - } - - return cgi_params; - -} - - -/********************************************************************* - * - * Function : get_char_param - * - * Description : Get a single-character parameter passed to a CGI - * function. - * - * Parameters : - * 1 : parameters = map of cgi parameters - * 2 : param_name = The name of the parameter to read - * - * Returns : Uppercase character on success, '\0' on error. - * - *********************************************************************/ -char get_char_param(const struct map *parameters, - const char *param_name) -{ - char ch; - - assert(parameters); - assert(param_name); - - ch = *(lookup(parameters, param_name)); - if ((ch >= 'a') && (ch <= 'z')) - { - ch = (char)(ch - 'a' + 'A'); - } - - return ch; -} - - -/********************************************************************* - * - * Function : get_string_param - * - * Description : Get a string paramater, to be used as an - * ACTION_STRING or ACTION_MULTI paramater. - * Validates the input to prevent stupid/malicious - * users from corrupting their action file. - * - * Parameters : - * 1 : parameters = map of cgi parameters - * 2 : param_name = The name of the parameter to read - * 3 : pparam = destination for paramater. Allocated as - * part of the map "parameters", so don't free it. - * Set to NULL if not specified. - * - * Returns : JB_ERR_OK on success, or if the paramater - * was not specified. - * JB_ERR_MEMORY on out-of-memory. - * JB_ERR_CGI_PARAMS if the paramater is not valid. - * - *********************************************************************/ -jb_err get_string_param(const struct map *parameters, - const char *param_name, - const char **pparam) -{ - const char *param; - const char *s; - char ch; - - assert(parameters); - assert(param_name); - assert(pparam); - - *pparam = NULL; - - param = lookup(parameters, param_name); - if (!*param) - { - return JB_ERR_OK; - } - - if (strlen(param) >= CGI_PARAM_LEN_MAX) - { - /* - * Too long. - * - * Note that the length limit is arbitrary, it just seems - * sensible to limit it to *something*. There's no - * technical reason for any limit at all. - */ - return JB_ERR_CGI_PARAMS; - } - - /* Check every character to see if it's legal */ - s = param; - while ((ch = *s++) != '\0') - { - if ( ((unsigned char)ch < (unsigned char)' ') - || (ch == '}') ) - { - /* Probable hack attempt, or user accidentally used '}'. */ - return JB_ERR_CGI_PARAMS; - } - } - - /* Success */ - *pparam = param; - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : get_number_param - * - * Description : Get a non-negative integer from the parameters - * passed to a CGI function. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : parameters = map of cgi parameters - * 3 : name = Name of CGI parameter to read - * 4 : pvalue = destination for value. - * Set to -1 on error. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the parameter was not specified - * or is not valid. - * - *********************************************************************/ -jb_err get_number_param(struct client_state *csp, - const struct map *parameters, - char *name, - unsigned *pvalue) -{ - const char *param; - char ch; - unsigned value; - - assert(csp); - assert(parameters); - assert(name); - assert(pvalue); - - *pvalue = 0; - - param = lookup(parameters, name); - if (!*param) - { - return JB_ERR_CGI_PARAMS; - } - - /* We don't use atoi because I want to check this carefully... */ - - value = 0; - while ((ch = *param++) != '\0') - { - if ((ch < '0') || (ch > '9')) - { - return JB_ERR_CGI_PARAMS; - } - - ch = (char)(ch - '0'); - - /* Note: - * - * <limits.h> defines UINT_MAX - * - * (UINT_MAX - ch) / 10 is the largest number that - * can be safely multiplied by 10 then have ch added. - */ - if (value > ((UINT_MAX - (unsigned)ch) / 10U)) - { - return JB_ERR_CGI_PARAMS; - } - - value = value * 10 + (unsigned)ch; - } - - /* Success */ - *pvalue = value; - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : error_response - * - * Description : returns an http_response that explains the reason - * why a request failed. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : templatename = Which template should be used for the answer - * 3 : sys_err = system error number - * - * Returns : A http_response. If we run out of memory, this - * will be cgi_error_memory(). - * - *********************************************************************/ -struct http_response *error_response(struct client_state *csp, - const char *templatename, - int sys_err) -{ - jb_err err; - struct http_response *rsp; - struct map *exports = default_exports(csp, NULL); - char *path = NULL; - - if (exports == NULL) - { - return cgi_error_memory(); - } - - if (NULL == (rsp = alloc_http_response())) - { - free_map(exports); - return cgi_error_memory(); - } - -#ifdef FEATURE_FORCE_LOAD - if (csp->flags & CSP_FLAG_FORCED) - { - path = strdup(FORCE_PREFIX); - } - else -#endif /* def FEATURE_FORCE_LOAD */ - { - path = strdup(""); - } - err = string_append(&path, csp->http->path); - - if (!err) err = map(exports, "host", 1, html_encode(csp->http->host), 0); - if (!err) err = map(exports, "hostport", 1, html_encode(csp->http->hostport), 0); - if (!err) err = map(exports, "path", 1, html_encode_and_free_original(path), 0); - if (!err) err = map(exports, "error", 1, html_encode_and_free_original(safe_strerror(sys_err)), 0); - if (!err) err = map(exports, "protocol", 1, csp->http->ssl ? "https://" : "http://", 1); - if (!err) - { - err = map(exports, "host-ip", 1, html_encode(csp->http->host_ip_addr_str), 0); - if (err) - { - /* Some failures, like "404 no such domain", don't have an IP address. */ - err = map(exports, "host-ip", 1, html_encode(csp->http->host), 0); - } - } - - - if (err) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - - if (!strcmp(templatename, "no-such-domain")) - { - rsp->status = strdup("404 No such domain"); - if (rsp->status == NULL) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->reason = RSP_REASON_NO_SUCH_DOMAIN; - } - else if (!strcmp(templatename, "forwarding-failed")) - { - const struct forward_spec *fwd = forward_url(csp, csp->http); - char *socks_type = NULL; - if (fwd == NULL) - { - log_error(LOG_LEVEL_FATAL, "gateway spec is NULL. This shouldn't happen!"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - } - - /* - * XXX: While the template is called forwarding-failed, - * it currently only handles socks forwarding failures. - */ - assert(fwd != NULL); - assert(fwd->type != SOCKS_NONE); - - /* - * Map failure reason, forwarding type and forwarder. - */ - if (NULL == csp->error_message) - { - /* - * Either we forgot to record the failure reason, - * or the memory allocation failed. - */ - log_error(LOG_LEVEL_ERROR, "Socks failure reason missing."); - csp->error_message = strdup("Failure reason missing. Check the log file for details."); - } - if (!err) err = map(exports, "gateway", 1, fwd->gateway_host, 1); - - /* - * XXX: this is almost the same code as in cgi_show_url_info() - * and thus should be factored out and shared. - */ - switch (fwd->type) - { - case SOCKS_4: - socks_type = "socks4-"; - break; - case SOCKS_4A: - socks_type = "socks4a-"; - break; - case SOCKS_5: - socks_type = "socks5-"; - break; - default: - log_error(LOG_LEVEL_FATAL, "Unknown socks type: %d.", fwd->type); - } - - if (!err) err = map(exports, "forwarding-type", 1, socks_type, 1); - if (!err) err = map(exports, "error-message", 1, html_encode(csp->error_message), 0); - - if (!err) rsp->status = strdup("503 Forwarding failure"); - if ((rsp->status == NULL) || (NULL == csp->error_message) || err) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->reason = RSP_REASON_FORWARDING_FAILED; - } - else if (!strcmp(templatename, "connect-failed")) - { - rsp->status = strdup("503 Connect failed"); - if (rsp->status == NULL) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->reason = RSP_REASON_CONNECT_FAILED; - } - - err = template_fill_for_cgi(csp, templatename, exports, rsp); - if (err) - { - free_http_response(rsp); - return cgi_error_memory(); - } - - return finish_http_response(csp, rsp); -} - - -/********************************************************************* - * - * Function : cgi_error_disabled - * - * Description : CGI function that is called to generate an error - * response if the actions editor or toggle CGI are - * accessed despite having being disabled at compile- - * or run-time, or if the user followed an untrusted link - * to access a unsafe CGI feature that is only reachable - * through Privoxy directly. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_disabled(const struct client_state *csp, - struct http_response *rsp) -{ - struct map *exports; - - assert(csp); - assert(rsp); - - if (NULL == (exports = default_exports(csp, "cgi-error-disabled"))) - { - return JB_ERR_MEMORY; - } - if (map(exports, "url", 1, html_encode(csp->http->url), 0)) - { - /* Not important enough to do anything */ - log_error(LOG_LEVEL_ERROR, "Failed to fill in url."); - } - - return template_fill_for_cgi(csp, "cgi-error-disabled", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_init_error_messages - * - * Description : Call at the start of the program to initialize - * the error message used by cgi_error_memory(). - * - * Parameters : N/A - * - * Returns : N/A - * - *********************************************************************/ -void cgi_init_error_messages(void) -{ - memset(cgi_error_memory_response, '\0', sizeof(*cgi_error_memory_response)); - cgi_error_memory_response->head = - "HTTP/1.0 500 Internal Privoxy Error\r\n" - "Content-Type: text/html\r\n" - "\r\n"; - cgi_error_memory_response->body = - "<html>\r\n" - "<head>\r\n" - " <title>500 Internal Privoxy Error</title>\r\n" - " <link rel=\"shortcut icon\" href=\"" CGI_PREFIX "error-favicon.ico\" type=\"image/x-icon\">" - "</head>\r\n" - "<body>\r\n" - "<h1>500 Internal Privoxy Error</h1>\r\n" - "<p>Privoxy <b>ran out of memory</b> while processing your request.</p>\r\n" - "<p>Please contact your proxy administrator, or try again later</p>\r\n" - "</body>\r\n" - "</html>\r\n"; - - cgi_error_memory_response->head_length = - strlen(cgi_error_memory_response->head); - cgi_error_memory_response->content_length = - strlen(cgi_error_memory_response->body); - cgi_error_memory_response->reason = RSP_REASON_OUT_OF_MEMORY; -} - - -/********************************************************************* - * - * Function : cgi_error_memory - * - * Description : Called if a CGI function runs out of memory. - * Returns a statically-allocated error response. - * - * Parameters : N/A - * - * Returns : http_response data structure for output. This is - * statically allocated, for obvious reasons. - * - *********************************************************************/ -struct http_response *cgi_error_memory(void) -{ - /* assert that it's been initialized. */ - assert(cgi_error_memory_response->head); - - return cgi_error_memory_response; -} - - -/********************************************************************* - * - * Function : cgi_error_no_template - * - * Description : Almost-CGI function that is called if a template - * cannot be loaded. Note this is not a true CGI, - * it takes a template name rather than a map of - * parameters. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : template_name = Name of template that could not - * be loaded. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_no_template(const struct client_state *csp, - struct http_response *rsp, - const char *template_name) -{ - static const char status[] = - "500 Internal Privoxy Error"; - static const char body_prefix[] = - "<html>\r\n" - "<head>\r\n" - " <title>500 Internal Privoxy Error</title>\r\n" - " <link rel=\"shortcut icon\" href=\"" CGI_PREFIX "error-favicon.ico\" type=\"image/x-icon\">" - "</head>\r\n" - "<body>\r\n" - "<h1>500 Internal Privoxy Error</h1>\r\n" - "<p>Privoxy encountered an error while processing your request:</p>\r\n" - "<p><b>Could not load template file <code>"; - static const char body_suffix[] = - "</code> or one of its included components.</b></p>\r\n" - "<p>Please contact your proxy administrator.</p>\r\n" - "<p>If you are the proxy administrator, please put the required file(s)" - "in the <code><i>(confdir)</i>/templates</code> directory. The " - "location of the <code><i>(confdir)</i></code> directory " - "is specified in the main Privoxy <code>config</code> " - "file. (It's typically the Privoxy install directory" -#ifndef _WIN32 - ", or <code>/etc/privoxy/</code>" -#endif /* ndef _WIN32 */ - ").</p>\r\n" - "</body>\r\n" - "</html>\r\n"; - const size_t body_size = strlen(body_prefix) + strlen(template_name) + strlen(body_suffix) + 1; - - assert(csp); - assert(rsp); - assert(template_name); - - /* Reset rsp, if needed */ - freez(rsp->status); - freez(rsp->head); - freez(rsp->body); - rsp->content_length = 0; - rsp->head_length = 0; - rsp->is_static = 0; - - rsp->body = malloc(body_size); - if (rsp->body == NULL) - { - return JB_ERR_MEMORY; - } - strlcpy(rsp->body, body_prefix, body_size); - strlcat(rsp->body, template_name, body_size); - strlcat(rsp->body, body_suffix, body_size); - - rsp->status = strdup(status); - if (rsp->status == NULL) - { - return JB_ERR_MEMORY; - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : cgi_error_unknown - * - * Description : Almost-CGI function that is called if an unexpected - * error occurs in the top-level CGI dispatcher. - * In this context, "unexpected" means "anything other - * than JB_ERR_MEMORY or JB_ERR_CGI_PARAMS" - CGIs are - * expected to handle all other errors internally, - * since they can give more relavent error messages - * that way. - * - * Note this is not a true CGI, it takes an error - * code rather than a map of parameters. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : error_to_report = Error code to report. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_unknown(const struct client_state *csp, - struct http_response *rsp, - jb_err error_to_report) -{ - static const char status[] = - "500 Internal Privoxy Error"; - static const char body_prefix[] = - "<html>\r\n" - "<head>\r\n" - " <title>500 Internal Privoxy Error</title>\r\n" - " <link rel=\"shortcut icon\" href=\"" CGI_PREFIX "error-favicon.ico\" type=\"image/x-icon\">" - "</head>\r\n" - "<body>\r\n" - "<h1>500 Internal Privoxy Error</h1>\r\n" - "<p>Privoxy encountered an error while processing your request:</p>\r\n" - "<p><b>Unexpected internal error: "; - static const char body_suffix[] = - "</b></p>\r\n" - "<p>Please " - "<a href=\"http://sourceforge.net/tracker/?group_id=11118&atid=111118\">" - "file a bug report</a>.</p>\r\n" - "</body>\r\n" - "</html>\r\n"; - char errnumbuf[30]; - /* - * Due to sizeof(errnumbuf), body_size will be slightly - * bigger than necessary but it doesn't really matter. - */ - const size_t body_size = strlen(body_prefix) + sizeof(errnumbuf) + strlen(body_suffix) + 1; - assert(csp); - assert(rsp); - - /* Reset rsp, if needed */ - freez(rsp->status); - freez(rsp->head); - freez(rsp->body); - rsp->content_length = 0; - rsp->head_length = 0; - rsp->is_static = 0; - rsp->reason = RSP_REASON_INTERNAL_ERROR; - - snprintf(errnumbuf, sizeof(errnumbuf), "%d", error_to_report); - - rsp->body = malloc(body_size); - if (rsp->body == NULL) - { - return JB_ERR_MEMORY; - } - strlcpy(rsp->body, body_prefix, body_size); - strlcat(rsp->body, errnumbuf, body_size); - strlcat(rsp->body, body_suffix, body_size); - - rsp->status = strdup(status); - if (rsp->status == NULL) - { - return JB_ERR_MEMORY; - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : cgi_error_bad_param - * - * Description : CGI function that is called if the parameters - * (query string) for a CGI were wrong. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_bad_param(const struct client_state *csp, - struct http_response *rsp) -{ - struct map *exports; - - assert(csp); - assert(rsp); - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - return template_fill_for_cgi(csp, "cgi-error-bad-param", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_redirect - * - * Description : CGI support function to generate a HTTP redirect - * message - * - * Parameters : - * 1 : rsp = http_response data structure for output - * 2 : target = string with the target URL - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_redirect (struct http_response * rsp, const char *target) -{ - jb_err err; - - assert(rsp); - assert(target); - - err = enlist_unique_header(rsp->headers, "Location", target); - - rsp->status = strdup("302 Local Redirect from Privoxy"); - if (rsp->status == NULL) - { - return JB_ERR_MEMORY; - } - - return err; -} - - -/********************************************************************* - * - * Function : add_help_link - * - * Description : Produce a copy of the string given as item, - * embedded in an HTML link to its corresponding - * section (item name in uppercase) in the actions - * chapter of the user manual, (whose URL is given in - * the config and defaults to our web site). - * - * FIXME: I currently only work for actions, and would - * like to be generalized for other topics. - * - * Parameters : - * 1 : item = item (will NOT be free()d.) - * It is assumed to be HTML-safe. - * 2 : config = The current configuration. - * - * Returns : String with item embedded in link, or NULL on - * out-of-memory - * - *********************************************************************/ -char *add_help_link(const char *item, - struct configuration_spec *config) -{ - char *result; - - if (!item) return NULL; - - result = strdup("<a href=\""); - if (!strncmpic(config->usermanual, "file://", 7) || - !strncmpic(config->usermanual, "http", 4)) - { - string_append(&result, config->usermanual); - } - else - { - string_append(&result, "http://"); - string_append(&result, CGI_SITE_2_HOST); - string_append(&result, "/user-manual/"); - } - string_append(&result, ACTIONS_HELP_PREFIX); - string_join (&result, string_toupper(item)); - string_append(&result, "\">"); - string_append(&result, item); - string_append(&result, "</a> "); - - return result; -} - - -/********************************************************************* - * - * Function : get_http_time - * - * Description : Get the time in a format suitable for use in a - * HTTP header - e.g.: - * "Sun, 06 Nov 1994 08:49:37 GMT" - * - * Parameters : - * 1 : time_offset = Time returned will be current time - * plus this number of seconds. - * 2 : buf = Destination for result. - * 3 : buffer_size = Size of the buffer above. Must be big - * enough to hold 29 characters plus a - * trailing zero. - * - * Returns : N/A - * - *********************************************************************/ -void get_http_time(int time_offset, char *buf, size_t buffer_size) -{ - static const char day_names[7][4] = - { "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" }; - static const char month_names[12][4] = - { "Jan", "Feb", "Mar", "Apr", "May", "Jun", - "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" }; - - struct tm *t; - time_t current_time; -#if defined(HAVE_GMTIME_R) - struct tm dummy; -#endif - - assert(buf); - assert(buffer_size > (size_t)29); - - time(&current_time); - - current_time += time_offset; - - /* get and save the gmt */ -#if HAVE_GMTIME_R - t = gmtime_r(&current_time, &dummy); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&gmtime_mutex); - t = gmtime(&current_time); - privoxy_mutex_unlock(&gmtime_mutex); -#else - t = gmtime(&current_time); -#endif - - /* Format: "Sun, 06 Nov 1994 08:49:37 GMT" */ - snprintf(buf, buffer_size, - "%s, %02d %s %4d %02d:%02d:%02d GMT", - day_names[t->tm_wday], - t->tm_mday, - month_names[t->tm_mon], - t->tm_year + 1900, - t->tm_hour, - t->tm_min, - t->tm_sec - ); - -} - -/********************************************************************* - * - * Function : get_locale_time - * - * Description : Get the time in a date(1)-like format - * according to the current locale - e.g.: - * "Fri Aug 29 19:37:12 CEST 2008" - * - * XXX: Should we allow the user to change the format? - * - * Parameters : - * 1 : buf = Destination for result. - * 2 : buffer_size = Size of the buffer above. Must be big - * enough to hold 29 characters plus a - * trailing zero. - * - * Returns : N/A - * - *********************************************************************/ -static void get_locale_time(char *buf, size_t buffer_size) -{ - struct tm *timeptr; - time_t current_time; -#if defined(HAVE_LOCALTIME_R) - struct tm dummy; -#endif - - assert(buf); - assert(buffer_size > (size_t)29); - - time(&current_time); - -#if HAVE_LOCALTIME_R - timeptr = localtime_r(&current_time, &dummy); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&localtime_mutex); - timeptr = localtime(&current_time); - privoxy_mutex_unlock(&localtime_mutex); -#else - timeptr = localtime(&current_time); -#endif - - strftime(buf, buffer_size, "%a %b %d %X %Z %Y", timeptr); - -} - -/********************************************************************* - * - * Function : finish_http_response - * - * Description : Fill in the missing headers in an http response, - * and flatten the headers to an http head. - * For HEAD requests the body is freed once - * the Content-Length header is set. - * - * Parameters : - * 1 : rsp = pointer to http_response to be processed - * - * Returns : A http_response, usually the rsp parameter. - * On error, free()s rsp and returns cgi_error_memory() - * - *********************************************************************/ -struct http_response *finish_http_response(const struct client_state *csp, struct http_response *rsp) -{ - char buf[BUFFER_SIZE]; - jb_err err; - - /* Special case - do NOT change this statically allocated response, - * which is ready for output anyway. - */ - if (rsp == cgi_error_memory_response) - { - return rsp; - } - - /* - * Fill in the HTTP Status, using HTTP/1.1 - * unless the client asked for HTTP/1.0. - */ - snprintf(buf, sizeof(buf), "%s %s", - strcmpic(csp->http->ver, "HTTP/1.0") ? "HTTP/1.1" : "HTTP/1.0", - rsp->status ? rsp->status : "200 OK"); - err = enlist_first(rsp->headers, buf); - - /* - * Set the Content-Length - */ - if (rsp->content_length == 0) - { - rsp->content_length = rsp->body ? strlen(rsp->body) : 0; - } - if (!err) - { - snprintf(buf, sizeof(buf), "Content-Length: %d", (int)rsp->content_length); - err = enlist(rsp->headers, buf); - } - - if (0 == strcmpic(csp->http->gpc, "head")) - { - /* - * The client only asked for the head. Dispose - * the body and log an offensive message. - * - * While it may seem to be a bit inefficient to - * prepare the body if it isn't needed, it's the - * only way to get the Content-Length right for - * dynamic pages. We could have disposed the body - * earlier, but not without duplicating the - * Content-Length setting code above. - */ - log_error(LOG_LEVEL_CGI, "Preparing to give head to %s.", csp->ip_addr_str); - freez(rsp->body); - rsp->content_length = 0; - } - - if (strncmpic(rsp->status, "302", 3)) - { - /* - * If it's not a redirect without any content, - * set the Content-Type to text/html if it's - * not already specified. - */ - if (!err) err = enlist_unique(rsp->headers, "Content-Type: text/html", 13); - } - - /* - * Fill in the rest of the default headers: - * - * Date: set to current date/time. - * Last-Modified: set to date/time the page was last changed. - * Expires: set to date/time page next needs reloading. - * Cache-Control: set to "no-cache" if applicable. - * - * See http://www.w3.org/Protocols/rfc2068/rfc2068 - */ - if (rsp->is_static) - { - /* - * Set Expires to about 10 min into the future so it'll get reloaded - * occasionally, e.g. if Privoxy gets upgraded. - */ - - if (!err) - { - get_http_time(0, buf, sizeof(buf)); - err = enlist_unique_header(rsp->headers, "Date", buf); - } - - /* Some date in the past. */ - if (!err) err = enlist_unique_header(rsp->headers, "Last-Modified", "Sat, 17 Jun 2000 12:00:00 GMT"); - - if (!err) - { - get_http_time(10 * 60, buf, sizeof(buf)); /* 10 * 60sec = 10 minutes */ - err = enlist_unique_header(rsp->headers, "Expires", buf); - } - } - else if (!strncmpic(rsp->status, "302", 3)) - { - get_http_time(0, buf, sizeof(buf)); - if (!err) err = enlist_unique_header(rsp->headers, "Date", buf); - } - else - { - /* - * Setting "Cache-Control" to "no-cache" and "Expires" to - * the current time doesn't exactly forbid caching, it just - * requires the client to revalidate the cached copy. - * - * If a temporary problem occurs and the user tries again after - * getting Privoxy's error message, a compliant browser may set the - * If-Modified-Since header with the content of the error page's - * Last-Modified header. More often than not, the document on the server - * is older than Privoxy's error message, the server would send status code - * 304 and the browser would display the outdated error message again and again. - * - * For documents delivered with status code 403, 404 and 503 we set "Last-Modified" - * to Tim Berners-Lee's birthday, which predates the age of any page on the web - * and can be safely used to "revalidate" without getting a status code 304. - * - * There is no need to let the useless If-Modified-Since header reach the - * server, it is therefore stripped by client_if_modified_since in parsers.c. - */ - if (!err) err = enlist_unique_header(rsp->headers, "Cache-Control", "no-cache"); - - get_http_time(0, buf, sizeof(buf)); - if (!err) err = enlist_unique_header(rsp->headers, "Date", buf); - if (!strncmpic(rsp->status, "403", 3) - || !strncmpic(rsp->status, "404", 3) - || !strncmpic(rsp->status, "503", 3)) - { - if (!err) err = enlist_unique_header(rsp->headers, "Last-Modified", "Wed, 08 Jun 1955 12:00:00 GMT"); - } - else - { - if (!err) err = enlist_unique_header(rsp->headers, "Last-Modified", buf); - } - if (!err) err = enlist_unique_header(rsp->headers, "Expires", "Sat, 17 Jun 2000 12:00:00 GMT"); - if (!err) err = enlist_unique_header(rsp->headers, "Pragma", "no-cache"); - } - - /* - * Quoting RFC 2616: - * - * HTTP/1.1 applications that do not support persistent connections MUST - * include the "close" connection option in every message. - */ - if (!err) err = enlist_unique_header(rsp->headers, "Connection", "close"); - - /* - * Write the head - */ - if (err || (NULL == (rsp->head = list_to_text(rsp->headers)))) - { - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->head_length = strlen(rsp->head); - - return rsp; - -} - - -/********************************************************************* - * - * Function : alloc_http_response - * - * Description : Allocates a new http_response structure. - * - * Parameters : N/A - * - * Returns : pointer to a new http_response, or NULL. - * - *********************************************************************/ -struct http_response *alloc_http_response(void) -{ - return (struct http_response *) zalloc(sizeof(struct http_response)); - -} - - -/********************************************************************* - * - * Function : free_http_response - * - * Description : Free the memory occupied by an http_response - * and its depandant structures. - * - * Parameters : - * 1 : rsp = pointer to http_response to be freed - * - * Returns : N/A - * - *********************************************************************/ -void free_http_response(struct http_response *rsp) -{ - /* - * Must special case cgi_error_memory_response, which is never freed. - */ - if (rsp && (rsp != cgi_error_memory_response)) - { - freez(rsp->status); - freez(rsp->head); - freez(rsp->body); - destroy_list(rsp->headers); - free(rsp); - } - -} - - -/********************************************************************* - * - * Function : template_load - * - * Description : CGI support function that loads a given HTML - * template, ignoring comment lines and following - * #include statements up to a depth of 1. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : template_ptr = Destination for pointer to loaded - * template text. - * 3 : templatename = name of the HTML template to be used - * 4 : recursive = Flag set if this function calls itself - * following an #include statament - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * JB_ERR_FILE if the template file cannot be read - * - *********************************************************************/ -jb_err template_load(const struct client_state *csp, char **template_ptr, - const char *templatename, int recursive) -{ - jb_err err; - char *templates_dir_path; - char *full_path; - char *file_buffer; - char *included_module; - const char *p; - FILE *fp; - char buf[BUFFER_SIZE]; - - assert(csp); - assert(template_ptr); - assert(templatename); - - *template_ptr = NULL; - - /* Validate template name. Paranoia. */ - for (p = templatename; *p != 0; p++) - { - if ( ((*p < 'a') || (*p > 'z')) - && ((*p < 'A') || (*p > 'Z')) - && ((*p < '0') || (*p > '9')) - && (*p != '-') - && (*p != '.')) - { - /* Illegal character */ - return JB_ERR_FILE; - } - } - - /* - * Generate full path using either templdir - * or confdir/templates as base directory. - */ - if (NULL != csp->config->templdir) - { - templates_dir_path = strdup(csp->config->templdir); - } - else - { - templates_dir_path = make_path(csp->config->confdir, "templates"); - } - - if (templates_dir_path == NULL) - { - log_error(LOG_LEVEL_ERROR, "Out of memory while generating template path for %s.", - templatename); - return JB_ERR_MEMORY; - } - - full_path = make_path(templates_dir_path, templatename); - free(templates_dir_path); - if (full_path == NULL) - { - log_error(LOG_LEVEL_ERROR, "Out of memory while generating full template path for %s.", - templatename); - return JB_ERR_MEMORY; - } - - /* Allocate buffer */ - - file_buffer = strdup(""); - if (file_buffer == NULL) - { - log_error(LOG_LEVEL_ERROR, "Not enough free memory to buffer %s.", full_path); - free(full_path); - return JB_ERR_MEMORY; - } - - /* Open template file */ - - if (NULL == (fp = fopen(full_path, "r"))) - { - log_error(LOG_LEVEL_ERROR, "Cannot open template file %s: %E", full_path); - free(full_path); - free(file_buffer); - return JB_ERR_FILE; - } - free(full_path); - - /* - * Read the file, ignoring comments, and honoring #include - * statements, unless we're already called recursively. - * - * XXX: The comment handling could break with lines lengths > sizeof(buf). - * This is unlikely in practise. - */ - while (fgets(buf, sizeof(buf), fp)) - { - if (!recursive && !strncmp(buf, "#include ", 9)) - { - if (JB_ERR_OK != (err = template_load(csp, &included_module, chomp(buf + 9), 1))) - { - free(file_buffer); - fclose(fp); - return err; - } - - if (string_join(&file_buffer, included_module)) - { - fclose(fp); - return JB_ERR_MEMORY; - } - - continue; - } - - /* skip lines starting with '#' */ - if (*buf == '#') - { - continue; - } - - if (string_append(&file_buffer, buf)) - { - fclose(fp); - return JB_ERR_MEMORY; - } - } - fclose(fp); - - *template_ptr = file_buffer; - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : template_fill - * - * Description : CGI support function that fills in a pre-loaded - * HTML template by replacing @name@ with value using - * pcrs, for each item in the output map. - * - * Note that a leading '$' charachter in the export map's - * values will be stripped and toggle on backreference - * interpretation. - * - * Parameters : - * 1 : template_ptr = IN: Template to be filled out. - * Will be free()d. - * OUT: Filled out template. - * Caller must free(). - * 2 : exports = map with fill in symbol -> name pairs - * - * Returns : JB_ERR_OK on success (and for uncritical errors) - * JB_ERR_MEMORY on out-of-memory error - * - *********************************************************************/ -jb_err template_fill(char **template_ptr, const struct map *exports) -{ - struct map_entry *m; - pcrs_job *job; - char buf[BUFFER_SIZE]; - char *tmp_out_buffer; - char *file_buffer; - size_t size; - int error; - const char *flags; - - assert(template_ptr); - assert(*template_ptr); - assert(exports); - - file_buffer = *template_ptr; - size = strlen(file_buffer) + 1; - - /* - * Assemble pcrs joblist from exports map - */ - for (m = exports->first; m != NULL; m = m->next) - { - if (*m->name == '$') - { - /* - * First character of name is '$', so remove this flag - * character and allow backreferences ($1 etc) in the - * "replace with" text. - */ - snprintf(buf, sizeof(buf), "%s", m->name + 1); - flags = "sigU"; - } - else - { - /* - * Treat the "replace with" text as a literal string - - * no quoting needed, no backreferences allowed. - * ("Trivial" ['T'] flag). - */ - flags = "sigTU"; - - /* Enclose name in @@ */ - snprintf(buf, sizeof(buf), "@%s@", m->name); - } - - log_error(LOG_LEVEL_CGI, "Substituting: s/%s/%s/%s", buf, m->value, flags); - - /* Make and run job. */ - job = pcrs_compile(buf, m->value, flags, &error); - if (job == NULL) - { - if (error == PCRS_ERR_NOMEM) - { - free(file_buffer); - *template_ptr = NULL; - return JB_ERR_MEMORY; - } - else - { - log_error(LOG_LEVEL_ERROR, "Error compiling template fill job %s: %d", m->name, error); - /* Hope it wasn't important and silently ignore the invalid job */ - } - } - else - { - error = pcrs_execute(job, file_buffer, size, &tmp_out_buffer, &size); - - pcrs_free_job(job); - if (NULL == tmp_out_buffer) - { - *template_ptr = NULL; - return JB_ERR_MEMORY; - } - - if (error < 0) - { - /* - * Substitution failed, keep the original buffer, - * log the problem and ignore it. - * - * The user might see some unresolved @CGI_VARIABLES@, - * but returning a special CGI error page seems unreasonable - * and could mask more important error messages. - */ - free(tmp_out_buffer); - log_error(LOG_LEVEL_ERROR, "Failed to execute s/%s/%s/%s. %s", - buf, m->value, flags, pcrs_strerror(error)); - } - else - { - /* Substitution succeeded, use modified buffer. */ - free(file_buffer); - file_buffer = tmp_out_buffer; - } - } - } - - /* - * Return - */ - *template_ptr = file_buffer; - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : template_fill_for_cgi - * - * Description : CGI support function that loads a HTML template - * and fills it in. Handles file-not-found errors - * by sending a HTML error message. For convenience, - * this function also frees the passed "exports" map. - * - * Parameters : - * 1 : csp = Client state - * 2 : templatename = name of the HTML template to be used - * 3 : exports = map with fill in symbol -> name pairs. - * Will be freed by this function. - * 4 : rsp = Response structure to fill in. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error - * - *********************************************************************/ -jb_err template_fill_for_cgi(const struct client_state *csp, - const char *templatename, - struct map *exports, - struct http_response *rsp) -{ - jb_err err; - - assert(csp); - assert(templatename); - assert(exports); - assert(rsp); - - err = template_load(csp, &rsp->body, templatename, 0); - if (err == JB_ERR_FILE) - { - free_map(exports); - return cgi_error_no_template(csp, rsp, templatename); - } - else if (err) - { - free_map(exports); - return err; /* JB_ERR_MEMORY */ - } - err = template_fill(&rsp->body, exports); - free_map(exports); - return err; -} - - -/********************************************************************* - * - * Function : default_exports - * - * Description : returns a struct map list that contains exports - * which are common to all CGI functions. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : caller = name of CGI who calls us and which should - * be excluded from the generated menu. May be - * NULL. - * Returns : NULL if no memory, else a new map. Caller frees. - * - *********************************************************************/ -struct map *default_exports(const struct client_state *csp, const char *caller) -{ - char buf[30]; - jb_err err; - struct map * exports; - int local_help_exists = 0; - char *ip_address = NULL; - char *hostname = NULL; - - assert(csp); - - exports = new_map(); - if (exports == NULL) - { - return NULL; - } - - if (csp->config->hostname) - { - get_host_information(csp->cfd, &ip_address, NULL); - hostname = strdup(csp->config->hostname); - } - else - { - get_host_information(csp->cfd, &ip_address, &hostname); - } - - err = map(exports, "version", 1, html_encode(VERSION), 0); - get_locale_time(buf, sizeof(buf)); - if (!err) err = map(exports, "time", 1, html_encode(buf), 0); - if (!err) err = map(exports, "my-ip-address", 1, html_encode(ip_address ? ip_address : "unknown"), 0); - freez(ip_address); - if (!err) err = map(exports, "my-hostname", 1, html_encode(hostname ? hostname : "unknown"), 0); - freez(hostname); - if (!err) err = map(exports, "homepage", 1, html_encode(HOME_PAGE_URL), 0); - if (!err) err = map(exports, "default-cgi", 1, html_encode(CGI_PREFIX), 0); - if (!err) err = map(exports, "menu", 1, make_menu(caller, csp->config->feature_flags), 0); - if (!err) err = map(exports, "code-status", 1, CODE_STATUS, 1); - if (!strncmpic(csp->config->usermanual, "file://", 7) || - !strncmpic(csp->config->usermanual, "http", 4)) - { - /* Manual is located somewhere else, just link to it. */ - if (!err) err = map(exports, "user-manual", 1, html_encode(csp->config->usermanual), 0); - } - else - { - /* Manual is delivered by Privoxy. */ - if (!err) err = map(exports, "user-manual", 1, html_encode(CGI_PREFIX"user-manual/"), 0); - } - if (!err) err = map(exports, "actions-help-prefix", 1, ACTIONS_HELP_PREFIX ,1); -#ifdef FEATURE_TOGGLE - if (!err) err = map_conditional(exports, "enabled-display", global_toggle_state); -#else - if (!err) err = map_block_killer(exports, "can-toggle"); -#endif - - snprintf(buf, sizeof(buf), "%d", csp->config->hport); - if (!err) err = map(exports, "my-port", 1, buf, 1); - - if(!strcmp(CODE_STATUS, "stable")) - { - if (!err) err = map_block_killer(exports, "unstable"); - } - - if (csp->config->admin_address != NULL) - { - if (!err) err = map(exports, "admin-address", 1, html_encode(csp->config->admin_address), 0); - local_help_exists = 1; - } - else - { - if (!err) err = map_block_killer(exports, "have-adminaddr-info"); - } - - if (csp->config->proxy_info_url != NULL) - { - if (!err) err = map(exports, "proxy-info-url", 1, html_encode(csp->config->proxy_info_url), 0); - local_help_exists = 1; - } - else - { - if (!err) err = map_block_killer(exports, "have-proxy-info"); - } - - if (local_help_exists == 0) - { - if (!err) err = map_block_killer(exports, "have-help-info"); - } - - if (err) - { - free_map(exports); - return NULL; - } - - return exports; -} - - -/********************************************************************* - * - * Function : map_block_killer - * - * Description : Convenience function. - * Adds a "killer" for the conditional HTML-template - * block <name>, i.e. a substitution of the regex - * "if-<name>-start.*if-<name>-end" to the given - * export list. - * - * Parameters : - * 1 : exports = map to extend - * 2 : name = name of conditional block - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err map_block_killer(struct map *exports, const char *name) -{ - char buf[1000]; /* Will do, since the names are hardwired */ - - assert(exports); - assert(name); - assert(strlen(name) < (size_t)490); - - snprintf(buf, sizeof(buf), "if-%s-start.*if-%s-end", name, name); - return map(exports, buf, 1, "", 1); -} - - -/********************************************************************* - * - * Function : map_block_keep - * - * Description : Convenience function. Removes the markers used - * by map-block-killer, to save a few bytes. - * i.e. removes "@if-<name>-start@" and "@if-<name>-end@" - * - * Parameters : - * 1 : exports = map to extend - * 2 : name = name of conditional block - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err map_block_keep(struct map *exports, const char *name) -{ - jb_err err; - char buf[500]; /* Will do, since the names are hardwired */ - - assert(exports); - assert(name); - assert(strlen(name) < (size_t)490); - - snprintf(buf, sizeof(buf), "if-%s-start", name); - err = map(exports, buf, 1, "", 1); - - if (err) - { - return err; - } - - snprintf(buf, sizeof(buf), "if-%s-end", name); - return map(exports, buf, 1, "", 1); -} - - -/********************************************************************* - * - * Function : map_conditional - * - * Description : Convenience function. - * Adds an "if-then-else" for the conditional HTML-template - * block <name>, i.e. a substitution of the form: - * @if-<name>-then@ - * True text - * @else-not-<name>@ - * False text - * @endif-<name>@ - * - * The control structure and one of the alternatives - * will be hidden. - * - * Parameters : - * 1 : exports = map to extend - * 2 : name = name of conditional block - * 3 : choose_first = nonzero for first, zero for second. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err map_conditional(struct map *exports, const char *name, int choose_first) -{ - char buf[1000]; /* Will do, since the names are hardwired */ - jb_err err; - - assert(exports); - assert(name); - assert(strlen(name) < (size_t)480); - - snprintf(buf, sizeof(buf), (choose_first - ? "else-not-%s@.*@endif-%s" - : "if-%s-then@.*@else-not-%s"), - name, name); - - err = map(exports, buf, 1, "", 1); - if (err) - { - return err; - } - - snprintf(buf, sizeof(buf), (choose_first ? "if-%s-then" : "endif-%s"), name); - return map(exports, buf, 1, "", 1); -} - - -/********************************************************************* - * - * Function : make_menu - * - * Description : Returns an HTML-formatted menu of the available - * unhidden CGIs, excluding the one given in <self> - * and the toggle CGI if toggling is disabled. - * - * Parameters : - * 1 : self = name of CGI to leave out, can be NULL for - * complete listing. - * 2 : feature_flags = feature bitmap from csp->config - * - * - * Returns : menu string, or NULL on out-of-memory error. - * - *********************************************************************/ -char *make_menu(const char *self, const unsigned feature_flags) -{ - const struct cgi_dispatcher *d; - char *result = strdup(""); - - if (self == NULL) - { - self = "NO-SUCH-CGI!"; - } - - /* List available unhidden CGI's and export as "other-cgis" */ - for (d = cgi_dispatchers; d->name; d++) - { - -#ifdef FEATURE_TOGGLE - if (!(feature_flags & RUNTIME_FEATURE_CGI_TOGGLE) && !strcmp(d->name, "toggle")) - { - /* - * Suppress the toggle link if remote toggling is disabled. - */ - continue; - } -#endif /* def FEATURE_TOGGLE */ - - if (d->description && strcmp(d->name, self)) - { - char *html_encoded_prefix; - - /* - * Line breaks would be great, but break - * the "blocked" template's JavaScript. - */ - string_append(&result, "<li><a href=\""); - html_encoded_prefix = html_encode(CGI_PREFIX); - if (html_encoded_prefix == NULL) - { - return NULL; - } - else - { - string_append(&result, html_encoded_prefix); - free(html_encoded_prefix); - } - string_append(&result, d->name); - string_append(&result, "\">"); - string_append(&result, d->description); - string_append(&result, "</a></li>"); - } - } - - return result; -} - - -/********************************************************************* - * - * Function : dump_map - * - * Description : HTML-dump a map for debugging (as table) - * - * Parameters : - * 1 : the_map = map to dump - * - * Returns : string with HTML - * - *********************************************************************/ -char *dump_map(const struct map *the_map) -{ - struct map_entry *cur_entry; - char *ret = strdup(""); - - string_append(&ret, "<table>\n"); - - for (cur_entry = the_map->first; - (cur_entry != NULL) && (ret != NULL); - cur_entry = cur_entry->next) - { - string_append(&ret, "<tr><td><b>"); - string_join (&ret, html_encode(cur_entry->name)); - string_append(&ret, "</b></td><td>"); - string_join (&ret, html_encode(cur_entry->value)); - string_append(&ret, "</td></tr>\n"); - } - - string_append(&ret, "</table>\n"); - return ret; -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/cgi.h b/external/privoxy/cgi.h deleted file mode 100644 index 6228b32..0000000 --- a/external/privoxy/cgi.h +++ /dev/null @@ -1,289 +0,0 @@ -#ifndef CGI_H_INCLUDED -#define CGI_H_INCLUDED -#define CGI_H_VERSION "$Id: cgi.h,v 1.35 2008/05/21 15:24:37 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/cgi.h,v $ - * - * Purpose : Declares functions to intercept request, generate - * html or gif answers, and to compose HTTP resonses. - * - * Functions declared include: - * - * - * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: cgi.h,v $ - * Revision 1.35 2008/05/21 15:24:37 fabiankeil - * Mark csp as immutable for a bunch of functions. - * - * Revision 1.34 2008/04/17 14:40:48 fabiankeil - * Provide get_http_time() with the buffer size so it doesn't - * have to blindly assume that the buffer is big enough. - * - * Revision 1.33 2007/01/28 13:41:17 fabiankeil - * - Add HEAD support to finish_http_response. - * - Add error favicon to internal HTML error messages. - * - * Revision 1.32 2006/12/17 17:53:39 fabiankeil - * Suppress the toggle link if remote toggling is disabled. - * - * Revision 1.31 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.29.2.2 2004/02/17 13:30:23 oes - * Moved cgi_error_disabled() from cgiedit.c to - * cgi.c to re-enable build with --disable-editor. - * Fixes Bug #892744. Thanks to Matthew Fischer - * for spotting. - * - * Revision 1.29.2.1 2003/12/17 16:33:28 oes - * Added prototype of new function cgi_redirect - * - * Revision 1.29 2002/05/19 11:33:21 jongfoster - * If a CGI error was not handled, and propogated back to - * dispatch_known_cgi(), then it was assumed to be "out of memory". - * This gave a very misleading error message. - * - * Now other errors will cause a simple message giving the error - * number and asking the user to report a bug. - * - * Bug report: - * http://sourceforge.net/tracker/index.php?func=detail - * &aid=557905&group_id=11118&atid=111118 - * - * Revision 1.28 2002/04/26 12:54:03 oes - * New function add_help_link - * - * Revision 1.27 2002/04/24 02:16:51 oes - * Moved get_char_param, get_string_param and get_number_param here from cgiedit.c - * - * Revision 1.26 2002/04/10 13:38:35 oes - * load_template signature changed - * - * Revision 1.25 2002/04/08 20:50:25 swa - * fixed JB spelling - * - * Revision 1.24 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.23 2002/03/24 16:18:15 jongfoster - * Removing old logo - * - * Revision 1.22 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.21 2002/03/07 03:48:38 oes - * - Changed built-in images from GIF to PNG - * (with regard to Unisys patent issue) - * - Added a 4x4 pattern PNG which is less intrusive - * than the logo but also clearly marks the deleted banners - * - * Revision 1.20 2002/03/04 17:53:22 oes - * Fixed compiled warning - * - * Revision 1.19 2002/01/21 00:33:52 jongfoster - * Adding map_block_keep() to save a few bytes in the edit-actions-list HTML. - * - * Revision 1.18 2001/11/16 00:46:31 jongfoster - * Fixing compiler warnings - * - * Revision 1.17 2001/10/23 21:48:19 jongfoster - * Cleaning up error handling in CGI functions - they now send back - * a HTML error page and should never cause a FATAL error. (Fixes one - * potential source of "denial of service" attacks). - * - * CGI actions file editor that works and is actually useful. - * - * Ability to toggle Junkbuster remotely using a CGI call. - * - * You can turn off both the above features in the main configuration - * file, e.g. if you are running a multi-user proxy. - * - * Revision 1.16 2001/09/16 17:08:54 jongfoster - * Moving simple CGI functions from cgi.c to new file cgisimple.c - * - * Revision 1.15 2001/09/16 15:02:35 jongfoster - * Adding i.j.b/robots.txt. - * Inlining add_stats() since it's only ever called from one place. - * - * Revision 1.14 2001/09/16 11:38:02 jongfoster - * Splitting fill_template() into 2 functions: - * template_load() loads the file - * template_fill() performs the PCRS regexps. - * This is because the CGI edit interface has a "table row" - * template which is used many times in the page - this - * change means it's only loaded from disk once. - * - * Revision 1.13 2001/09/16 11:00:10 jongfoster - * New function alloc_http_response, for symmetry with free_http_response - * - * Revision 1.12 2001/09/13 23:31:25 jongfoster - * Moving image data to cgi.c rather than cgi.h. - * - * Revision 1.11 2001/08/05 16:06:20 jongfoster - * Modifiying "struct map" so that there are now separate header and - * "map_entry" structures. This means that functions which modify a - * map no longer need to return a pointer to the modified map. - * Also, it no longer reverses the order of the entries (which may be - * important with some advanced template substitutions). - * - * Revision 1.10 2001/08/01 21:19:22 jongfoster - * Moving file version information to a separate CGI page. - * - * Revision 1.9 2001/08/01 00:17:54 jongfoster - * Adding prototype for map_conditional - * - * Revision 1.8 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.7 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.6 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.5 2001/06/29 13:22:44 oes - * - Cleaned up - * - Added new functions: default_exports(), make_menu(), - * error_response() etc, ranamed others and changed - * param and return types. - * - Removed HTTP/HTML snipplets - * - Removed logentry from cancelled commit - * - * Revision 1.4 2001/06/09 10:50:58 jongfoster - * Changing "show URL info" handler to new style. - * Adding "extern" to some function prototypes. - * - * Revision 1.3 2001/06/03 19:12:16 oes - * introduced new cgi handling - * - * No revisions before 1.3 - * - **********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Main dispatch function - */ -extern struct http_response *dispatch_cgi(struct client_state *csp); - -/* Not exactly a CGI */ -extern struct http_response * error_response(struct client_state *csp, - const char *templatename, - int err); - -/* - * CGI support functions - */ -extern struct http_response * alloc_http_response(void); -extern void free_http_response(struct http_response *rsp); - -extern struct http_response *finish_http_response(const struct client_state *csp, - struct http_response *rsp); - -extern struct map * default_exports(const struct client_state *csp, const char *caller); - -extern jb_err map_block_killer (struct map *exports, const char *name); -extern jb_err map_block_keep (struct map *exports, const char *name); -extern jb_err map_conditional (struct map *exports, const char *name, int choose_first); - -extern jb_err template_load(const struct client_state *csp, char ** template_ptr, - const char *templatename, int recursive); -extern jb_err template_fill(char ** template_ptr, const struct map *exports); -extern jb_err template_fill_for_cgi(const struct client_state *csp, - const char *templatename, - struct map *exports, - struct http_response *rsp); - -extern void cgi_init_error_messages(void); -extern struct http_response *cgi_error_memory(void); -extern jb_err cgi_redirect (struct http_response * rsp, const char *target); - -extern jb_err cgi_error_no_template(const struct client_state *csp, - struct http_response *rsp, - const char *template_name); -extern jb_err cgi_error_bad_param(const struct client_state *csp, - struct http_response *rsp); -extern jb_err cgi_error_disabled(const struct client_state *csp, - struct http_response *rsp); -extern jb_err cgi_error_unknown(const struct client_state *csp, - struct http_response *rsp, - jb_err error_to_report); - -extern jb_err get_number_param(struct client_state *csp, - const struct map *parameters, - char *name, - unsigned *pvalue); -extern jb_err get_string_param(const struct map *parameters, - const char *param_name, - const char **pparam); -extern char get_char_param(const struct map *parameters, - const char *param_name); - -/* - * Text generators - */ -extern void get_http_time(int time_offset, char *buf, size_t buffer_size); -extern char *add_help_link(const char *item, struct configuration_spec *config); -extern char *make_menu(const char *self, const unsigned feature_flags); -extern char *dump_map(const struct map *the_map); - -/* - * Ad replacement images - */ -extern const char image_pattern_data[]; -extern const size_t image_pattern_length; -extern const char image_blank_data[]; -extern const size_t image_blank_length; - -/* Revision control strings from this header and associated .c file */ -extern const char cgi_rcs[]; -extern const char cgi_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef CGI_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/cgiedit.c b/external/privoxy/cgiedit.c deleted file mode 100644 index 6fca21f..0000000 --- a/external/privoxy/cgiedit.c +++ /dev/null @@ -1,4924 +0,0 @@ -const char cgiedit_rcs[] = "$Id: cgiedit.c,v 1.65 2009/03/08 14:19:22 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/cgiedit.c,v $ - * - * Purpose : CGI-based actionsfile editor. - * - * Functions declared include: cgi_edit_* - * - * NOTE: The CGIs in this file use parameter names - * such as "f" and "s" which are really *BAD* choices. - * However, I'm trying to save bytes in the - * edit-actions-list HTML page - the standard actions - * file generated a 550kbyte page, which is ridiculous. - * - * Stick to the short names in this file for consistency. - * - * Copyright : Written by and Copyright (C) 2001-2008 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: cgiedit.c,v $ - * Revision 1.65 2009/03/08 14:19:22 fabiankeil - * Fix justified (but harmless) compiler warnings - * on platforms where sizeof(int) < sizeof(long). - * - * Revision 1.64 2009/03/01 18:43:09 fabiankeil - * Fix cparser warnings. - * - * Revision 1.63 2008/12/04 18:15:38 fabiankeil - * Fix some cparser warnings. - * - * Revision 1.62 2008/08/31 15:59:02 fabiankeil - * There's no reason to let remote toggling support depend - * on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't. - * - * Revision 1.61 2008/03/24 18:12:52 fabiankeil - * Use sizeof() more often. - * - * Revision 1.60 2008/03/15 14:52:35 fabiankeil - * Add CGI editor support for the "disable all filters of this type" - * directives "-client-header-filter", "-server-header-filter", - * "-client-header-tagger" and "-server-header-tagger". - * - * Revision 1.59 2008/03/08 16:25:56 fabiankeil - * After three file modification time mismatches, turn the CGI editor off. - * - * Revision 1.58 2007/11/28 17:57:01 fabiankeil - * Fix double free in cgi_edit_actions_list(). - * Reported by adlab in BR#1840145. - * - * Revision 1.57 2007/10/27 13:32:23 fabiankeil - * Plug minor 5-year-old memory leak. Spotted by - * Valgrind and triggered by Privoxy-Regression-Test. - * - * Revision 1.56 2007/08/05 13:47:03 fabiankeil - * #1763173 from Stefan Huehner: s@const static@static const@. - * - * Revision 1.55 2007/05/31 11:50:20 fabiankeil - * Re-enable support for old-school URLs like - * http://config.privoxy.org/edit-actions-list?f=default - * in the action editor. - * - * They are no longer used by the CGI pages, but make it easier - * to reach the editor directly, without knowing the requested - * file's index in csp->config->actions_file[]. - * - * Revision 1.54 2007/05/14 10:33:51 fabiankeil - * - Use strlcpy() and strlcat() instead of strcpy() and strcat(). - * - * Revision 1.53 2007/04/15 16:39:20 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.52 2007/04/12 10:41:23 fabiankeil - * - Don't mistake VC++'s _snprintf() for a snprintf() replacement. - * - Move some cgi_edit_actions_for_url() variables into structs. - * - Remove bogus comment. - * - * Revision 1.51 2007/04/08 13:21:05 fabiankeil - * Reference action files in CGI URLs by id instead - * of using the first part of the file name. - * Fixes BR 1694250 and BR 1590556. - * - * Revision 1.50 2007/03/29 11:40:34 fabiankeil - * Divide @filter-params@ into @client-header-filter-params@ - * @content-filter-params@ and @server-header-filter-params@. - * - * Revision 1.49 2007/03/20 15:16:34 fabiankeil - * Use dedicated header filter actions instead of abusing "filter". - * Replace "filter-client-headers" and "filter-client-headers" - * with "server-header-filter" and "client-header-filter". - * - * Revision 1.48 2007/02/13 14:35:25 fabiankeil - * Replace hash escaping code to prevent - * crashes, memory and file corruption. - * - * Revision 1.47 2006/12/28 18:04:25 fabiankeil - * Fixed gcc43 conversion warnings. - * - * Revision 1.46 2006/12/27 18:44:52 fabiankeil - * Stop shadowing string.h's index(). - * - * Revision 1.45 2006/12/21 12:57:48 fabiankeil - * Add config option "split-large-forms" - * to work around the browser bug reported - * in BR #1570678. - * - * Revision 1.44 2006/12/09 13:49:16 fabiankeil - * Fix configure option --disable-toggle. - * Thanks to Peter Thoenen for reporting this. - * - * Revision 1.43 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.41.2.12 2006/01/30 15:16:25 david__schmidt - * Remove a little residual debugging info - * - * Revision 1.41.2.11 2006/01/29 23:10:56 david__schmidt - * Multiple filter file support - * - * Revision 1.41.2.10 2005/07/04 03:13:43 david__schmidt - * Undo some damaging memory leak patches - * - * Revision 1.41.2.9 2005/07/04 00:31:04 david__schmidt - * Removing a double free - * - * Revision 1.41.2.8 2005/05/07 21:50:54 david__schmidt - * A few memory leaks plugged (mostly on error paths) - * - * Revision 1.41.2.7 2004/02/17 13:30:23 oes - * Moved cgi_error_disabled() from cgiedit.c to - * cgi.c to re-enable build with --disable-editor. - * Fixes Bug #892744. Thanks to Matthew Fischer - * for spotting. - * - * Revision 1.41.2.6 2003/12/18 08:13:48 oes - * One line lost in last commit - * - * Revision 1.41.2.5 2003/12/17 16:33:47 oes - * - All edit functions that redirect back to the list page - * now use cgi_redirect - * - All redirects now contain useless parameter "foo", whose - * value are raw seconds since epoch, in order to force - * Opera and Konqueror to properly reload the list. Closes - * bug #859993 - * - * Revision 1.41.2.4 2003/03/11 11:53:59 oes - * Cosmetic: Renamed cryptic variable - * - * Revision 1.41.2.3 2002/11/12 15:01:41 oes - * Fix: Don't free uninitialized struct editable_file - * - * Revision 1.41.2.2 2002/08/05 20:02:59 oes - * Bugfix: "Insert new section at top" did not work properly if first non-comment line in file was of type FILE_LINE_ACTION - * - * Revision 1.41.2.1 2002/08/02 12:43:14 oes - * Fixed bug #588514: first_time now set on a per-string basis in actions_from_radio; javascriptify now called on copies - * - * Revision 1.41 2002/05/21 19:09:45 oes - * - Made Add/Edit/Remove URL Submit and Cancel - * buttons jump back to relevant section in eal - * - Bugfix: remove-url-form needs p export - * - * Revision 1.40 2002/05/19 11:34:35 jongfoster - * Handling read-only actions files better - report the actual - * error, not "Out of memory"! - * - * Bug report: - * http://sourceforge.net/tracker/index.php?func=detail - * &aid=557905&group_id=11118&atid=111118 - * - * Revision 1.39 2002/05/12 21:39:15 jongfoster - * - Adding Doxygen-style comments to structures and #defines. - * - Correcting function comments - * - * Revision 1.38 2002/05/03 23:00:38 jongfoster - * Support for templates for "standard actions" buttons. - * See bug #549871 - * - * Revision 1.37 2002/04/30 11:14:52 oes - * Made csp the first parameter in *action_to_html - * - * Revision 1.36 2002/04/26 21:53:30 jongfoster - * Fixing a memory leak. (Near, but not caused by, my earlier commit). - * - * Revision 1.35 2002/04/26 21:50:02 jongfoster - * Honouring default exports in edit-actions-for-url-filter template. - * - * Revision 1.34 2002/04/26 12:54:17 oes - * Adaptions to changes in actions.c - * - * Revision 1.33 2002/04/24 02:17:47 oes - * - Moved get_char_param, get_string_param and get_number_param to cgi.c - * - Comments - * - Activated Jon's code for editing multiple AFs - * - cgi_edit_list_actions now provides context-sensitive - * help, looks up all action sets from standard.action and - * makes buttons for them in the catchall section - * - cgi_edit_action_submit now honors a p parameter, looks up - * the corresponding action set, and sets the catchall pattern's - * actions accordingly. - * - * Revision 1.32 2002/04/19 16:55:31 jongfoster - * Fixing newline problems. If we do our own text file newline - * mangling, we don't want the library to do any, so we need to - * open the files in *binary* mode. - * - * Revision 1.31 2002/04/18 19:21:08 jongfoster - * Added code to detect "conventional" action files, that start - * with a set of actions for all URLs (the pattern "/"). - * These are special-cased in the "edit-actions-list" CGI, so - * that a special UI can be written for them. - * - * Revision 1.30 2002/04/10 13:38:35 oes - * load_template signature changed - * - * Revision 1.29 2002/04/08 16:59:08 oes - * Fixed comment - * - * Revision 1.28 2002/03/27 12:30:29 oes - * Deleted unsused variable - * - * Revision 1.27 2002/03/26 23:06:04 jongfoster - * Removing duplicate @ifs on the toggle page - * - * Revision 1.26 2002/03/26 22:59:17 jongfoster - * Fixing /toggle to display status consistently. - * - * Revision 1.25 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.24 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.23 2002/03/24 13:32:41 swa - * name change related issues - * - * Revision 1.22 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.21 2002/03/22 18:02:48 jongfoster - * Fixing remote toggle - * - * Revision 1.20 2002/03/16 20:28:34 oes - * Added descriptions to the filters so users will know what they select in the cgi editor - * - * Revision 1.19 2002/03/16 18:38:14 jongfoster - * Stopping stupid or malicious users from breaking the actions - * file using the web-based editor. - * - * Revision 1.18 2002/03/16 14:57:44 jongfoster - * Full support for enabling/disabling modular filters. - * - * Revision 1.17 2002/03/16 14:26:42 jongfoster - * First version of modular filters support - READ ONLY! - * Fixing a double-free bug in the out-of-memory handling in map_radio(). - * - * Revision 1.16 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.15 2002/03/06 22:54:35 jongfoster - * Automated function-comment nitpicking. - * - * Revision 1.14 2002/03/05 00:24:51 jongfoster - * Patch to always edit the current actions file. - * - * Revision 1.13 2002/03/04 02:07:59 david__schmidt - * Enable web editing of actions file on OS/2 (it had been broken all this time!) - * - * Revision 1.12 2002/03/03 09:18:03 joergs - * Made jumbjuster work on AmigaOS again. - * - * Revision 1.11 2002/01/23 01:03:31 jongfoster - * Fixing gcc [CygWin] compiler warnings - * - * Revision 1.10 2002/01/23 00:22:59 jongfoster - * Adding new function cgi_edit_actions_section_swap(), to reorder - * the actions file. - * - * Adding get_url_spec_param() to get a validated URL pattern. - * - * Moving edit_read_line() out of this file and into loaders.c. - * - * Adding missing html_encode() to many CGI functions. - * - * Moving the functions that #include actionlist.h to the end of the file, - * because the Visual C++ 97 debugger gets extremely confused if you try - * to debug any code that comes after them in the file. - * - * Major optimizations in cgi_edit_actions_list() to reduce the size of - * the generated HTML (down 40% from 550k to 304k), with major side-effects - * throughout the editor and templates. In particular, the length of the - * URLs throughout the editor has been drastically reduced, by cutting - * paramater names down to 1 character and CGI names down to 3-4 - * characters, by removing all non-essential CGI paramaters even at the - * expense of having to re-read the actions file for the most trivial - * page, and by using relative rather than absolute URLs. This means - * that this (typical example): - * - * <a href="http://ijbswa.sourceforge.net/config/edit-actions-url-form? - * filename=ijb&ver=1011487572&section=12&pattern=13 - * &oldval=www.oesterhelt.org%2Fdeanimate-demo"> - * - * is now this: - * - * <a href="eau?f=ijb&v=1011487572&p=13"> - * - * Revision 1.9 2002/01/17 20:56:22 jongfoster - * Replacing hard references to the URL of the config interface - * with #defines from project.h - * - * Revision 1.8 2001/11/30 23:35:51 jongfoster - * Renaming actionsfile to ijb.action - * - * Revision 1.7 2001/11/13 00:28:24 jongfoster - * - Renaming parameters from edit-actions-for-url so that they only - * contain legal JavaScript characters. If we wanted to write - * JavaScript that worked with Netscape 4, this is nessacery. - * (Note that at the moment the JavaScript doesn't actually work - * with Netscape 4, but now this is purely a template issue, not - * one affecting code). - * - Adding new CGIs for use by non-JavaScript browsers: - * edit-actions-url-form - * edit-actions-add-url-form - * edit-actions-remove-url-form - * - Fixing || bug. - * - * Revision 1.6 2001/10/29 03:48:09 david__schmidt - * OS/2 native needed a snprintf() routine. Added one to miscutil, brackedted - * by and __OS2__ ifdef. - * - * Revision 1.5 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.4 2001/10/23 21:48:19 jongfoster - * Cleaning up error handling in CGI functions - they now send back - * a HTML error page and should never cause a FATAL error. (Fixes one - * potential source of "denial of service" attacks). - * - * CGI actions file editor that works and is actually useful. - * - * Ability to toggle JunkBuster remotely using a CGI call. - * - * You can turn off both the above features in the main configuration - * file, e.g. if you are running a multi-user proxy. - * - * Revision 1.3 2001/10/14 22:12:49 jongfoster - * New version of CGI-based actionsfile editor. - * Major changes, including: - * - Completely new file parser and file output routines - * - edit-actions CGI renamed edit-actions-for-url - * - All CGIs now need a filename parameter, except for... - * - New CGI edit-actions which doesn't need a filename, - * to allow you to start the editor up. - * - edit-actions-submit now works, and now automatically - * redirects you back to the main edit-actions-list handler. - * - * Revision 1.2 2001/09/16 17:05:14 jongfoster - * Removing unused #include showarg.h - * - * Revision 1.1 2001/09/16 15:47:37 jongfoster - * First version of CGI-based edit interface. This is very much a - * work-in-progress, and you can't actually use it to edit anything - * yet. You must #define FEATURE_CGI_EDIT_ACTIONS for these changes - * to have any effect. - * - * - **********************************************************************/ - - -#include "config.h" - -/* - * FIXME: Following includes copied from cgi.c - which are actually needed? - */ - -#include <stdio.h> -#include <stdlib.h> -#include <sys/types.h> -#include <ctype.h> -#include <string.h> -#include <assert.h> -#include <sys/stat.h> - -#include "project.h" -#include "cgi.h" -#include "cgiedit.h" -#include "cgisimple.h" -#include "list.h" -#include "encode.h" -#include "actions.h" -#include "miscutil.h" -#include "errlog.h" -#include "loaders.h" -#ifdef FEATURE_TOGGLE -/* loadcfg.h is for global_toggle_state only */ -#include "loadcfg.h" -#endif /* def FEATURE_TOGGLE */ -#include "urlmatch.h" - -const char cgiedit_h_rcs[] = CGIEDIT_H_VERSION; - - -#ifdef FEATURE_CGI_EDIT_ACTIONS - -/** - * A line in an editable_file. - */ -struct file_line -{ - /** Next entry in the linked list */ - struct file_line * next; - - /** The raw data, to write out if this line is unmodified. */ - char * raw; - - /** Comments and/or whitespace to put before this line if it's modified - and then written out. */ - char * prefix; - - /** The actual data, as a string. Line continuation and comment removal - are performed on the data read from file before it's stored here, so - it will be a single line of data. */ - char * unprocessed; - - /** The type of data on this line. One of the FILE_LINE_xxx constants. */ - int type; - - /** The actual data, processed into some sensible data type. */ - union - { - - /** An action specification. */ - struct action_spec action[1]; - - /** A name=value pair. */ - struct - { - - /** The name in the name=value pair. */ - char * name; - - /** The value in the name=value pair, as a string. */ - char * svalue; - - /** The value in the name=value pair, as an integer. */ - int ivalue; - - } setting; - - /* Add more data types here... e.g. - - - struct url_spec url[1]; - - struct - { - struct action_spec action[1]; - const char * name; - } alias; - - */ - - } data; - -}; - -/** This file_line has not been processed yet. */ -#define FILE_LINE_UNPROCESSED 1 - -/** This file_line is blank. Can only appear at the end of a file, due to - the way the parser works. */ -#define FILE_LINE_BLANK 2 - -/** This file_line says {{alias}}. */ -#define FILE_LINE_ALIAS_HEADER 3 - -/** This file_line defines an alias. */ -#define FILE_LINE_ALIAS_ENTRY 4 - -/** This file_line defines an {action}. */ -#define FILE_LINE_ACTION 5 - -/** This file_line specifies a URL pattern. */ -#define FILE_LINE_URL 6 - -/** This file_line says {{settings}}. */ -#define FILE_LINE_SETTINGS_HEADER 7 - -/** This file_line is in a {{settings}} block. */ -#define FILE_LINE_SETTINGS_ENTRY 8 - -/** This file_line says {{description}}. */ -#define FILE_LINE_DESCRIPTION_HEADER 9 - -/** This file_line is in a {{description}} block. */ -#define FILE_LINE_DESCRIPTION_ENTRY 10 - -/* - * Number of file modification time mismatches - * before the CGI editor gets turned off. - */ -#define ACCEPTABLE_TIMESTAMP_MISMATCHES 3 - -/** - * A configuration file, in a format that can be edited and written back to - * disk. - */ -struct editable_file -{ - struct file_line * lines; /**< The contents of the file. A linked list of lines. */ - const char * filename; /**< Full pathname - e.g. "/etc/privoxy/wibble.action". */ - unsigned identifier; /**< The file name's position in csp->config->actions_file[]. */ - const char * version_str; /**< Last modification time, as a string. For CGI param. */ - /**< Can be used in URL without using url_param(). */ - unsigned version; /**< Last modification time - prevents chaos with - the browser's "back" button. Note that this is a - time_t cast to an unsigned. When comparing, always - cast the time_t to an unsigned, and *NOT* vice-versa. - This may lose the top few bits, but they're not - significant anyway. */ - int newline; /**< Newline convention - one of the NEWLINE_xxx constants. - Note that changing this after the file has been - read in will cause a mess. */ - struct file_line * parse_error; /**< On parse error, this is the offending line. */ - const char * parse_error_text; /**< On parse error, this is the problem. - (Statically allocated) */ -}; - -/** - * Information about the filter types. - * Used for macro replacement in cgi_edit_actions_for_url. - */ -struct filter_type_info -{ - const int multi_action_index; /**< The multi action index as defined in project.h */ - const char *macro_name; /**< Name of the macro that has to be replaced - with the prepared templates. - For example "content-filter-params" */ - const char *type; /**< Name of the filter type, - for example "server-header-filter". */ - /* XXX: check if these two can be combined. */ - const char *disable_all_option; /**< Name of the catch-all radio option that has - to be checked or unchecked for this filter type. */ - const char *disable_all_param; /**< Name of the parameter that causes all filters of - this type to be disabled. */ - const char *abbr_type; /**< Abbreviation of the filter type, usually the - first or second character capitalized */ - const char *anchor; /**< Anchor for the User Manual link, - for example "SERVER-HEADER-FILTER" */ -}; - -/* Accessed by index, keep the order in the way the FT_ macros are defined. */ -static const struct filter_type_info filter_type_info[] = -{ - { - ACTION_MULTI_FILTER, - "content-filter-params", "filter", - "filter-all", "filter_all", - "F", "FILTER" - }, - { - ACTION_MULTI_CLIENT_HEADER_FILTER, - "client-header-filter-params", "client-header-filter", - "client-header-filter-all", "client_header_filter_all", - "C", "CLIENT-HEADER-FILTER" - }, - { - ACTION_MULTI_SERVER_HEADER_FILTER, - "server-header-filter-params", "server-header-filter", - "server-header-filter-all", "server_header_filter_all", - "S", "SERVER-HEADER-FILTER" - }, - { - ACTION_MULTI_CLIENT_HEADER_TAGGER, - "client-header-tagger-params", "client-header-tagger", - "client-header-tagger-all", "client_header_tagger_all", - "L", "CLIENT-HEADER-TAGGER" - }, - { - ACTION_MULTI_SERVER_HEADER_TAGGER, - "server-header-tagger-params", "server-header-tagger", - "server-header-tagger-all", "server_header_tagger_all", - "E", "SERVER-HEADER-TAGGER" - }, -}; - -/* FIXME: Following non-static functions should be prototyped in .h or made static */ - -/* Functions to read and write arbitrary config files */ -jb_err edit_read_file(struct client_state *csp, - const struct map *parameters, - int require_version, - struct editable_file **pfile); -jb_err edit_write_file(struct editable_file * file); -void edit_free_file(struct editable_file * file); - -/* Functions to read and write actions files */ -jb_err edit_parse_actions_file(struct editable_file * file); -jb_err edit_read_actions_file(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters, - int require_version, - struct editable_file **pfile); - -/* Error handlers */ -jb_err cgi_error_modified(struct client_state *csp, - struct http_response *rsp, - const char *filename); -jb_err cgi_error_parse(struct client_state *csp, - struct http_response *rsp, - struct editable_file *file); -jb_err cgi_error_file(struct client_state *csp, - struct http_response *rsp, - const char *filename); -jb_err cgi_error_file_read_only(struct client_state *csp, - struct http_response *rsp, - const char *filename); - -/* Internal arbitrary config file support functions */ -static jb_err edit_read_file_lines(FILE *fp, struct file_line ** pfile, int *newline); -static void edit_free_file_lines(struct file_line * first_line); - -/* Internal actions file support functions */ -static int match_actions_file_header_line(const char * line, const char * name); -static jb_err split_line_on_equals(const char * line, char ** pname, char ** pvalue); - -/* Internal parameter parsing functions */ -static jb_err get_url_spec_param(struct client_state *csp, - const struct map *parameters, - const char *name, - char **pvalue); - - -/* Internal actionsfile <==> HTML conversion functions */ -static jb_err map_radio(struct map * exports, - const char * optionname, - const char * values, - int value); -static jb_err actions_to_radio(struct map * exports, - const struct action_spec *action); -static jb_err actions_from_radio(const struct map * parameters, - struct action_spec *action); - - -static jb_err map_copy_parameter_html(struct map *out, - const struct map *in, - const char *name); -#if 0 /* unused function */ -static jb_err map_copy_parameter_url(struct map *out, - const struct map *in, - const char *name); -#endif /* unused function */ - -static jb_err get_file_name_param(struct client_state *csp, - const struct map *parameters, - const char *param_name, - const char **pfilename); - -/* Internal convenience functions */ -static char *section_target(const unsigned sectionid); - -/********************************************************************* - * - * Function : section_target - * - * Description : Given an unsigned (section id) n, produce a dynamically - * allocated string of the form #l<n>, for use in link - * targets. - * - * XXX: The hash should be moved into the templates - * to make this function more generic and render - * stringify() obsolete. - * - * Parameters : - * 1 : sectionid = start line number of section - * - * Returns : String with link target, or NULL if out of - * memory - * - *********************************************************************/ -static char *section_target(const unsigned sectionid) -{ - char buf[30]; - - snprintf(buf, sizeof(buf), "#l%d", sectionid); - return(strdup(buf)); - -} - - -/********************************************************************* - * - * Function : stringify - * - * Description : Convert a number into a dynamically allocated string. - * - * Parameters : - * 1 : number = The number to convert. - * - * Returns : String with link target, or NULL if out of memory - * - *********************************************************************/ -static char *stringify(const unsigned number) -{ - char buf[6]; - - snprintf(buf, sizeof(buf), "%i", number); - return strdup(buf); -} - - -/********************************************************************* - * - * Function : map_copy_parameter_html - * - * Description : Copy a CGI parameter from one map to another, HTML - * encoding it. - * - * Parameters : - * 1 : out = target map - * 2 : in = source map - * 3 : name = name of cgi parameter to copy - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the parameter doesn't exist - * in the source map - * - *********************************************************************/ -static jb_err map_copy_parameter_html(struct map *out, - const struct map *in, - const char *name) -{ - const char * value; - jb_err err; - - assert(out); - assert(in); - assert(name); - - value = lookup(in, name); - err = map(out, name, 1, html_encode(value), 0); - - if (err) - { - /* Out of memory */ - return err; - } - else if (*value == '\0') - { - return JB_ERR_CGI_PARAMS; - } - else - { - return JB_ERR_OK; - } -} - - -#if 0 /* unused function */ -/********************************************************************* - * - * Function : map_copy_parameter_url - * - * Description : Copy a CGI parameter from one map to another, URL - * encoding it. - * - * Parameters : - * 1 : out = target map - * 2 : in = source map - * 3 : name = name of cgi parameter to copy - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the parameter doesn't exist - * in the source map - * - *********************************************************************/ -static jb_err map_copy_parameter_url(struct map *out, - const struct map *in, - const char *name) -{ - const char * value; - jb_err err; - - assert(out); - assert(in); - assert(name); - - value = lookup(in, name); - err = map(out, name, 1, url_encode(value), 0); - - if (err) - { - /* Out of memory */ - return err; - } - else if (*value == '\0') - { - return JB_ERR_CGI_PARAMS; - } - else - { - return JB_ERR_OK; - } -} -#endif /* 0 - unused function */ - - -/********************************************************************* - * - * Function : cgi_edit_actions_url_form - * - * Description : CGI function that displays a form for - * edit-actions-url - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters - * i : (action index) Identifies the file to edit - * v : (version) File's last-modified time - * p : (pattern) Line number of pattern to edit - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_url_form(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map * exports; - unsigned patternid; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number; - unsigned section_start_line_number = 0; - jb_err err; - - assert(csp); - assert(rsp); - assert(parameters); - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "p", &patternid); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - cur_line = file->lines; - - for (line_number = 1; (cur_line != NULL) && (line_number < patternid); line_number++) - { - if (cur_line->type == FILE_LINE_ACTION) - { - section_start_line_number = line_number; - } - cur_line = cur_line->next; - } - - if ( (cur_line == NULL) - || (line_number != patternid) - || (patternid < 1U) - || (cur_line->type != FILE_LINE_URL)) - { - /* Invalid "patternid" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - if (NULL == (exports = default_exports(csp, NULL))) - { - edit_free_file(file); - return JB_ERR_MEMORY; - } - - err = map(exports, "f", 1, stringify(file->identifier), 0); - if (!err) err = map(exports, "v", 1, file->version_str, 1); - if (!err) err = map(exports, "p", 1, url_encode(lookup(parameters, "p")), 0); - if (!err) err = map(exports, "u", 1, html_encode(cur_line->unprocessed), 0); - if (!err) err = map(exports, "jumptarget", 1, section_target(section_start_line_number), 0); - - edit_free_file(file); - - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "edit-actions-url-form", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_add_url_form - * - * Description : CGI function that displays a form for - * edit-actions-url - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * f : (filename) Identifies the file to edit - * v : (version) File's last-modified time - * s : (section) Line number of section to edit - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_add_url_form(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map *exports; - jb_err err; - - assert(csp); - assert(rsp); - assert(parameters); - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - err = map_copy_parameter_html(exports, parameters, "f"); - if (!err) err = map_copy_parameter_html(exports, parameters, "v"); - if (!err) err = map_copy_parameter_html(exports, parameters, "s"); - - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "edit-actions-add-url-form", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_remove_url_form - * - * Description : CGI function that displays a form for - * edit-actions-url - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * f : (number) The action file identifier. - * v : (version) File's last-modified time - * p : (pattern) Line number of pattern to edit - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_remove_url_form(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map * exports; - unsigned patternid; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number; - unsigned section_start_line_number = 0; - jb_err err; - - assert(csp); - assert(rsp); - assert(parameters); - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "p", &patternid); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - cur_line = file->lines; - - for (line_number = 1; (cur_line != NULL) && (line_number < patternid); line_number++) - { - if (cur_line->type == FILE_LINE_ACTION) - { - section_start_line_number = line_number; - } - cur_line = cur_line->next; - } - - if ( (cur_line == NULL) - || (line_number != patternid) - || (patternid < 1U) - || (cur_line->type != FILE_LINE_URL)) - { - /* Invalid "patternid" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - if (NULL == (exports = default_exports(csp, NULL))) - { - edit_free_file(file); - return JB_ERR_MEMORY; - } - - err = map(exports, "f", 1, stringify(file->identifier), 0); - if (!err) err = map(exports, "v", 1, file->version_str, 1); - if (!err) err = map(exports, "p", 1, url_encode(lookup(parameters, "p")), 0); - if (!err) err = map(exports, "u", 1, html_encode(cur_line->unprocessed), 0); - if (!err) err = map(exports, "jumptarget", 1, section_target(section_start_line_number), 0); - if (!err) err = map(exports, "actions-file", 1, html_encode(file->filename), 0); - - edit_free_file(file); - - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "edit-actions-remove-url-form", exports, rsp); -} - - -/********************************************************************* - * - * Function : edit_write_file - * - * Description : Write a complete file to disk. - * - * Parameters : - * 1 : file = File to write. - * - * Returns : JB_ERR_OK on success - * JB_ERR_FILE on error writing to file. - * JB_ERR_MEMORY on out of memory - * - *********************************************************************/ -jb_err edit_write_file(struct editable_file * file) -{ - FILE * fp; - struct file_line * cur_line; - struct stat statbuf[1]; - char version_buf[22]; /* 22 = ceil(log10(2^64)) + 2 = max number of - digits in time_t, assuming this is a 64-bit - machine, plus null terminator, plus one - for paranoia */ - - assert(file); - assert(file->filename); - - if (NULL == (fp = fopen(file->filename, "wb"))) - { - return JB_ERR_FILE; - } - - cur_line = file->lines; - while (cur_line != NULL) - { - if (cur_line->raw) - { - if (fputs(cur_line->raw, fp) < 0) - { - fclose(fp); - return JB_ERR_FILE; - } - } - else - { - if (cur_line->prefix) - { - if (fputs(cur_line->prefix, fp) < 0) - { - fclose(fp); - return JB_ERR_FILE; - } - } - if (cur_line->unprocessed) - { - - if (NULL != strchr(cur_line->unprocessed, '#')) - { - /* Must quote '#' characters */ - int numhash = 0; - size_t len; - char * src; - char * dest; - char * str; - - /* Count number of # characters, so we know length of output string */ - src = cur_line->unprocessed; - while (NULL != (src = strchr(src, '#'))) - { - numhash++; - src++; - } - assert(numhash > 0); - - /* Allocate new memory for string */ - len = strlen(cur_line->unprocessed) + (size_t)numhash; - if (NULL == (str = malloc(len + 1))) - { - /* Uh oh, just trashed file! */ - fclose(fp); - return JB_ERR_MEMORY; - } - - /* Copy string but quote hashes */ - src = cur_line->unprocessed; - dest = str; - while (*src) - { - if (*src == '#') - { - *dest++ = '\\'; - numhash--; - assert(numhash >= 0); - } - *dest++ = *src++; - } - *dest = '\0'; - - assert(numhash == 0); - assert(strlen(str) == len); - assert(str == dest - len); - assert(src - len <= cur_line->unprocessed); - - if ((strlen(str) != len) || (numhash != 0)) - { - /* - * Escaping didn't work as expected, go spread the news. - * Only reached in non-debugging builds. - */ - log_error(LOG_LEVEL_ERROR, - "Looks like hash escaping failed. %s might be corrupted now.", - file->filename); - } - - if (fputs(str, fp) < 0) - { - free(str); - fclose(fp); - return JB_ERR_FILE; - } - - free(str); - } - else - { - /* Can write without quoting '#' characters. */ - if (fputs(cur_line->unprocessed, fp) < 0) - { - fclose(fp); - return JB_ERR_FILE; - } - } - if (fputs(NEWLINE(file->newline), fp) < 0) - { - fclose(fp); - return JB_ERR_FILE; - } - } - else - { - /* FIXME: Write data from file->data->whatever */ - assert(0); - } - } - cur_line = cur_line->next; - } - - fclose(fp); - - - /* Update the version stamp in the file structure, since we just - * wrote to the file & changed it's date. - */ - if (stat(file->filename, statbuf) < 0) - { - /* Error, probably file not found. */ - return JB_ERR_FILE; - } - file->version = (unsigned)statbuf->st_mtime; - - /* Correct file->version_str */ - freez(file->version_str); - snprintf(version_buf, sizeof(version_buf), "%u", file->version); - version_buf[sizeof(version_buf)-1] = '\0'; - file->version_str = strdup(version_buf); - if (version_buf == NULL) - { - return JB_ERR_MEMORY; - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : edit_free_file - * - * Description : Free a complete file in memory. - * - * Parameters : - * 1 : file = Data structure to free. - * - * Returns : N/A - * - *********************************************************************/ -void edit_free_file(struct editable_file * file) -{ - if (!file) - { - /* Silently ignore NULL pointer */ - return; - } - - edit_free_file_lines(file->lines); - freez(file->version_str); - file->version = 0; - file->parse_error_text = NULL; /* Statically allocated */ - file->parse_error = NULL; - - free(file); -} - - -/********************************************************************* - * - * Function : edit_free_file_lines - * - * Description : Free an entire linked list of file lines. - * - * Parameters : - * 1 : first_line = Data structure to free. - * - * Returns : N/A - * - *********************************************************************/ -static void edit_free_file_lines(struct file_line * first_line) -{ - struct file_line * next_line; - - while (first_line != NULL) - { - next_line = first_line->next; - first_line->next = NULL; - freez(first_line->raw); - freez(first_line->prefix); - freez(first_line->unprocessed); - switch(first_line->type) - { - case 0: /* special case if memory zeroed */ - case FILE_LINE_UNPROCESSED: - case FILE_LINE_BLANK: - case FILE_LINE_ALIAS_HEADER: - case FILE_LINE_SETTINGS_HEADER: - case FILE_LINE_DESCRIPTION_HEADER: - case FILE_LINE_DESCRIPTION_ENTRY: - case FILE_LINE_ALIAS_ENTRY: - case FILE_LINE_URL: - /* No data is stored for these */ - break; - - case FILE_LINE_ACTION: - free_action(first_line->data.action); - break; - - case FILE_LINE_SETTINGS_ENTRY: - freez(first_line->data.setting.name); - freez(first_line->data.setting.svalue); - break; - default: - /* Should never happen */ - assert(0); - break; - } - first_line->type = 0; /* paranoia */ - free(first_line); - first_line = next_line; - } -} - - -/********************************************************************* - * - * Function : match_actions_file_header_line - * - * Description : Match an actions file {{header}} line - * - * Parameters : - * 1 : line = String from file - * 2 : name = Header to match against - * - * Returns : 0 iff they match. - * - *********************************************************************/ -static int match_actions_file_header_line(const char * line, const char * name) -{ - size_t len; - - assert(line); - assert(name); - - /* Look for "{{" */ - if ((line[0] != '{') || (line[1] != '{')) - { - return 1; - } - line += 2; - - /* Look for optional whitespace */ - while ( (*line == ' ') || (*line == '\t') ) - { - line++; - } - - /* Look for the specified name (case-insensitive) */ - len = strlen(name); - if (0 != strncmpic(line, name, len)) - { - return 1; - } - line += len; - - /* Look for optional whitespace */ - while ( (*line == ' ') || (*line == '\t') ) - { - line++; - } - - /* Look for "}}" and end of string*/ - if ((line[0] != '}') || (line[1] != '}') || (line[2] != '\0')) - { - return 1; - } - - /* It matched!! */ - return 0; -} - - -/********************************************************************* - * - * Function : match_actions_file_header_line - * - * Description : Match an actions file {{header}} line - * - * Parameters : - * 1 : line = String from file. Must not start with - * whitespace (else infinite loop!) - * 2 : pname = Destination for name - * 2 : pvalue = Destination for value - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_PARSE if there's no "=" sign, or if there's - * nothing before the "=" sign (but empty - * values *after* the "=" sign are legal). - * - *********************************************************************/ -static jb_err split_line_on_equals(const char * line, char ** pname, char ** pvalue) -{ - const char * name_end; - const char * value_start; - size_t name_len; - - assert(line); - assert(pname); - assert(pvalue); - assert(*line != ' '); - assert(*line != '\t'); - - *pname = NULL; - *pvalue = NULL; - - value_start = strchr(line, '='); - if ((value_start == NULL) || (value_start == line)) - { - return JB_ERR_PARSE; - } - - name_end = value_start - 1; - - /* Eat any whitespace before the '=' */ - while ((*name_end == ' ') || (*name_end == '\t')) - { - /* - * we already know we must have at least 1 non-ws char - * at start of buf - no need to check - */ - name_end--; - } - - name_len = (size_t)(name_end - line) + 1; /* Length excluding \0 */ - if (NULL == (*pname = (char *) malloc(name_len + 1))) - { - return JB_ERR_MEMORY; - } - strncpy(*pname, line, name_len); - (*pname)[name_len] = '\0'; - - /* Eat any the whitespace after the '=' */ - value_start++; - while ((*value_start == ' ') || (*value_start == '\t')) - { - value_start++; - } - - if (NULL == (*pvalue = strdup(value_start))) - { - free(*pname); - *pname = NULL; - return JB_ERR_MEMORY; - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : edit_parse_actions_file - * - * Description : Parse an actions file in memory. - * - * Passed linked list must have the "data" member - * zeroed, and must contain valid "next" and - * "unprocessed" fields. The "raw" and "prefix" - * fields are ignored, and "type" is just overwritten. - * - * Note that on error the file may have been - * partially parsed. - * - * Parameters : - * 1 : file = Actions file to be parsed in-place. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_PARSE on error - * - *********************************************************************/ -jb_err edit_parse_actions_file(struct editable_file * file) -{ - struct file_line * cur_line; - size_t len; - const char * text; /* Text from a line */ - char * name; /* For lines of the form name=value */ - char * value; /* For lines of the form name=value */ - struct action_alias * alias_list = NULL; - jb_err err = JB_ERR_OK; - - /* alias_list contains the aliases defined in this file. - * It might be better to use the "file_line.data" fields - * in the relavent places instead. - */ - - cur_line = file->lines; - - /* A note about blank line support: Blank lines should only - * ever occur as the last line in the file. This function - * is more forgiving than that - FILE_LINE_BLANK can occur - * anywhere. - */ - - /* Skip leading blanks. Should only happen if file is - * empty (which is valid, but pointless). - */ - while ( (cur_line != NULL) - && (cur_line->unprocessed[0] == '\0') ) - { - /* Blank line */ - cur_line->type = FILE_LINE_BLANK; - cur_line = cur_line->next; - } - - if ( (cur_line != NULL) - && (cur_line->unprocessed[0] != '{') ) - { - /* File doesn't start with a header */ - file->parse_error = cur_line; - file->parse_error_text = "First (non-comment) line of the file must contain a header."; - return JB_ERR_PARSE; - } - - if ( (cur_line != NULL) && (0 == - match_actions_file_header_line(cur_line->unprocessed, "settings") ) ) - { - cur_line->type = FILE_LINE_SETTINGS_HEADER; - - cur_line = cur_line->next; - while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{')) - { - if (cur_line->unprocessed[0]) - { - cur_line->type = FILE_LINE_SETTINGS_ENTRY; - - err = split_line_on_equals(cur_line->unprocessed, - &cur_line->data.setting.name, - &cur_line->data.setting.svalue); - if (err == JB_ERR_MEMORY) - { - return err; - } - else if (err != JB_ERR_OK) - { - /* Line does not contain a name=value pair */ - file->parse_error = cur_line; - file->parse_error_text = "Expected a name=value pair on this {{description}} line, but couldn't find one."; - return JB_ERR_PARSE; - } - } - else - { - cur_line->type = FILE_LINE_BLANK; - } - cur_line = cur_line->next; - } - } - - if ( (cur_line != NULL) && (0 == - match_actions_file_header_line(cur_line->unprocessed, "description") ) ) - { - cur_line->type = FILE_LINE_DESCRIPTION_HEADER; - - cur_line = cur_line->next; - while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{')) - { - if (cur_line->unprocessed[0]) - { - cur_line->type = FILE_LINE_DESCRIPTION_ENTRY; - } - else - { - cur_line->type = FILE_LINE_BLANK; - } - cur_line = cur_line->next; - } - } - - if ( (cur_line != NULL) && (0 == - match_actions_file_header_line(cur_line->unprocessed, "alias") ) ) - { - cur_line->type = FILE_LINE_ALIAS_HEADER; - - cur_line = cur_line->next; - while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{')) - { - if (cur_line->unprocessed[0]) - { - /* define an alias */ - struct action_alias * new_alias; - - cur_line->type = FILE_LINE_ALIAS_ENTRY; - - err = split_line_on_equals(cur_line->unprocessed, &name, &value); - if (err == JB_ERR_MEMORY) - { - return err; - } - else if (err != JB_ERR_OK) - { - /* Line does not contain a name=value pair */ - file->parse_error = cur_line; - file->parse_error_text = "Expected a name=value pair on this {{alias}} line, but couldn't find one."; - return JB_ERR_PARSE; - } - - if ((new_alias = zalloc(sizeof(*new_alias))) == NULL) - { - /* Out of memory */ - free(name); - free(value); - free_alias_list(alias_list); - return JB_ERR_MEMORY; - } - - err = get_actions(value, alias_list, new_alias->action); - if (err) - { - /* Invalid action or out of memory */ - free(name); - free(value); - free(new_alias); - free_alias_list(alias_list); - if (err == JB_ERR_MEMORY) - { - return err; - } - else - { - /* Line does not contain a name=value pair */ - file->parse_error = cur_line; - file->parse_error_text = "This alias does not specify a valid set of actions."; - return JB_ERR_PARSE; - } - } - - free(value); - - new_alias->name = name; - - /* add to list */ - new_alias->next = alias_list; - alias_list = new_alias; - } - else - { - cur_line->type = FILE_LINE_BLANK; - } - cur_line = cur_line->next; - } - } - - /* Header done, process the main part of the file */ - while (cur_line != NULL) - { - /* At this point, (cur_line->unprocessed[0] == '{') */ - assert(cur_line->unprocessed[0] == '{'); - text = cur_line->unprocessed + 1; - len = strlen(text) - 1; - if (text[len] != '}') - { - /* No closing } on header */ - free_alias_list(alias_list); - file->parse_error = cur_line; - file->parse_error_text = "Headers starting with '{' must have a " - "closing bracket ('}'). Headers starting with two brackets ('{{') " - "must close with two brackets ('}}')."; - return JB_ERR_PARSE; - } - - if (text[0] == '{') - { - /* An invalid {{ header. */ - free_alias_list(alias_list); - file->parse_error = cur_line; - file->parse_error_text = "Unknown or unexpected two-bracket header. " - "Please remember that the system (two-bracket) headers must " - "appear in the order {{settings}}, {{description}}, {{alias}}, " - "and must appear before any actions (one-bracket) headers. " - "Also note that system headers may not be repeated."; - return JB_ERR_PARSE; - } - - while ( (*text == ' ') || (*text == '\t') ) - { - text++; - len--; - } - while ( (len > (size_t)0) - && ( (text[len - 1] == ' ') - || (text[len - 1] == '\t') ) ) - { - len--; - } - - cur_line->type = FILE_LINE_ACTION; - - /* Remove {} and make copy */ - if (NULL == (value = (char *) malloc(len + 1))) - { - /* Out of memory */ - free_alias_list(alias_list); - return JB_ERR_MEMORY; - } - strncpy(value, text, len); - value[len] = '\0'; - - /* Get actions */ - err = get_actions(value, alias_list, cur_line->data.action); - if (err) - { - /* Invalid action or out of memory */ - free(value); - free_alias_list(alias_list); - if (err == JB_ERR_MEMORY) - { - return err; - } - else - { - /* Line does not contain a name=value pair */ - file->parse_error = cur_line; - file->parse_error_text = "This header does not specify a valid set of actions."; - return JB_ERR_PARSE; - } - } - - /* Done with string - it was clobbered anyway */ - free(value); - - /* Process next line */ - cur_line = cur_line->next; - - /* Loop processing URL patterns */ - while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{')) - { - if (cur_line->unprocessed[0]) - { - /* Could parse URL here, but this isn't currently needed */ - - cur_line->type = FILE_LINE_URL; - } - else - { - cur_line->type = FILE_LINE_BLANK; - } - cur_line = cur_line->next; - } - } /* End main while(cur_line != NULL) loop */ - - free_alias_list(alias_list); - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : edit_read_file_lines - * - * Description : Read all the lines of a file into memory. - * Handles whitespace, comments and line continuation. - * - * Parameters : - * 1 : fp = File to read from. On return, this will be - * at EOF but it will not have been closed. - * 2 : pfile = Destination for a linked list of file_lines. - * Will be set to NULL on error. - * 3 : newline = How to handle newlines. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * - *********************************************************************/ -jb_err edit_read_file_lines(FILE *fp, struct file_line ** pfile, int *newline) -{ - struct file_line * first_line; /* Keep for return value or to free */ - struct file_line * cur_line; /* Current line */ - struct file_line * prev_line; /* Entry with prev_line->next = cur_line */ - jb_err rval; - - assert(fp); - assert(pfile); - - *pfile = NULL; - - cur_line = first_line = zalloc(sizeof(struct file_line)); - if (cur_line == NULL) - { - return JB_ERR_MEMORY; - } - - cur_line->type = FILE_LINE_UNPROCESSED; - - rval = edit_read_line(fp, &cur_line->raw, &cur_line->prefix, &cur_line->unprocessed, newline, NULL); - if (rval) - { - /* Out of memory or empty file. */ - /* Note that empty file is not an error we propogate up */ - free(cur_line); - return ((rval == JB_ERR_FILE) ? JB_ERR_OK : rval); - } - - do - { - prev_line = cur_line; - cur_line = prev_line->next = zalloc(sizeof(struct file_line)); - if (cur_line == NULL) - { - /* Out of memory */ - edit_free_file_lines(first_line); - return JB_ERR_MEMORY; - } - - cur_line->type = FILE_LINE_UNPROCESSED; - - rval = edit_read_line(fp, &cur_line->raw, &cur_line->prefix, &cur_line->unprocessed, newline, NULL); - if ((rval != JB_ERR_OK) && (rval != JB_ERR_FILE)) - { - /* Out of memory */ - edit_free_file_lines(first_line); - return JB_ERR_MEMORY; - } - - } - while (rval != JB_ERR_FILE); - - /* EOF */ - - /* We allocated one too many - free it */ - prev_line->next = NULL; - free(cur_line); - - *pfile = first_line; - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : edit_read_file - * - * Description : Read a complete file into memory. - * Handles CGI parameter parsing. If requested, also - * checks the file's modification timestamp. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : parameters = map of cgi parameters. - * 3 : require_version = true to check "ver" parameter. - * 4 : pfile = Destination for the file. Will be set - * to NULL on error. - * - * CGI Parameters : - * f : The action file identifier. - * ver : (Only if require_version is nonzero) - * Timestamp of the actions file. If wrong, this - * function fails with JB_ERR_MODIFIED. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if "filename" was not specified - * or is not valid. - * JB_ERR_FILE if the file cannot be opened or - * contains no data - * JB_ERR_MODIFIED if version checking was requested and - * failed - the file was modified outside - * of this CGI editor instance. - * - *********************************************************************/ -jb_err edit_read_file(struct client_state *csp, - const struct map *parameters, - int require_version, - struct editable_file **pfile) -{ - struct file_line * lines; - FILE * fp; - jb_err err; - const char *filename = NULL; - struct editable_file * file; - unsigned version = 0; - struct stat statbuf[1]; - char version_buf[22]; - int newline = NEWLINE_UNKNOWN; - unsigned i; - - assert(csp); - assert(parameters); - assert(pfile); - - *pfile = NULL; - - err = get_number_param(csp, parameters, "f", &i); - if ((JB_ERR_OK == err) && (i < MAX_AF_FILES) && (NULL != csp->config->actions_file[i])) - { - filename = csp->config->actions_file[i]; - } - else if (JB_ERR_CGI_PARAMS == err) - { - /* - * Probably an old-school URL like - * http://config.privoxy.org/edit-actions-list?f=default - */ - err = get_file_name_param(csp, parameters, "f", &filename); - } - - if (NULL == filename || stat(filename, statbuf) < 0) - { - /* Error, probably file not found. */ - return JB_ERR_FILE; - } - version = (unsigned) statbuf->st_mtime; - - if (require_version) - { - unsigned specified_version; - err = get_number_param(csp, parameters, "v", &specified_version); - if (err) - { - return err; - } - - if (version != specified_version) - { - return JB_ERR_MODIFIED; - } - } - - if (NULL == (fp = fopen(filename,"rb"))) - { - return JB_ERR_FILE; - } - - err = edit_read_file_lines(fp, &lines, &newline); - - fclose(fp); - - if (err) - { - return err; - } - - file = (struct editable_file *) zalloc(sizeof(*file)); - if (err) - { - edit_free_file_lines(lines); - return err; - } - - file->lines = lines; - file->newline = newline; - file->filename = filename; - file->version = version; - file->identifier = i; - - /* Correct file->version_str */ - freez(file->version_str); - snprintf(version_buf, sizeof(version_buf), "%u", file->version); - version_buf[sizeof(version_buf)-1] = '\0'; - file->version_str = strdup(version_buf); - if (version_buf == NULL) - { - edit_free_file(file); - return JB_ERR_MEMORY; - } - - *pfile = file; - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : edit_read_actions_file - * - * Description : Read a complete actions file into memory. - * Handles CGI parameter parsing. If requested, also - * checks the file's modification timestamp. - * - * If this function detects an error in the categories - * JB_ERR_FILE, JB_ERR_MODIFIED, or JB_ERR_PARSE, - * then it handles it by filling in the specified - * response structure and returning JB_ERR_FILE. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = HTTP response. Only filled in on error. - * 2 : parameters = map of cgi parameters. - * 3 : require_version = true to check "ver" parameter. - * 4 : pfile = Destination for the file. Will be set - * to NULL on error. - * - * CGI Parameters : - * f : The actions file identifier. - * ver : (Only if require_version is nonzero) - * Timestamp of the actions file. If wrong, this - * function fails with JB_ERR_MODIFIED. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if "filename" was not specified - * or is not valid. - * JB_ERR_FILE if the file does not contain valid data, - * or if file cannot be opened or - * contains no data, or if version - * checking was requested and failed. - * - *********************************************************************/ -jb_err edit_read_actions_file(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters, - int require_version, - struct editable_file **pfile) -{ - jb_err err; - struct editable_file *file; - static int acceptable_failures = ACCEPTABLE_TIMESTAMP_MISMATCHES - 1; - - assert(csp); - assert(parameters); - assert(pfile); - - *pfile = NULL; - - err = edit_read_file(csp, parameters, require_version, &file); - if (err) - { - /* Try to handle if possible */ - if (err == JB_ERR_FILE) - { - err = cgi_error_file(csp, rsp, lookup(parameters, "f")); - } - else if (err == JB_ERR_MODIFIED) - { - assert(require_version); - err = cgi_error_modified(csp, rsp, lookup(parameters, "f")); - log_error(LOG_LEVEL_ERROR, - "Blocking CGI edit request due to modification time mismatch."); - if (acceptable_failures > 0) - { - log_error(LOG_LEVEL_INFO, - "The CGI editor will be turned off after another %d mismatche(s).", - acceptable_failures); - acceptable_failures--; - } - else - { - log_error(LOG_LEVEL_INFO, - "Timestamp mismatch limit reached, turning CGI editor off. " - "Reload the configuration file to reenable it."); - csp->config->feature_flags &= ~RUNTIME_FEATURE_CGI_EDIT_ACTIONS; - } - } - if (err == JB_ERR_OK) - { - /* - * Signal to higher-level CGI code that there was a problem but we - * handled it, they should just return JB_ERR_OK. - */ - err = JB_ERR_FILE; - } - return err; - } - - err = edit_parse_actions_file(file); - if (err) - { - if (err == JB_ERR_PARSE) - { - err = cgi_error_parse(csp, rsp, file); - if (err == JB_ERR_OK) - { - /* - * Signal to higher-level CGI code that there was a problem but we - * handled it, they should just return JB_ERR_OK. - */ - err = JB_ERR_FILE; - } - } - edit_free_file(file); - return err; - } - - *pfile = file; - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : get_file_name_param - * - * Description : Get the name of the file to edit from the parameters - * passed to a CGI function using the old syntax. - * This function handles security checks and only - * accepts files that Privoxy already knows. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : parameters = map of cgi parameters - * 3 : param_name = The name of the parameter to read - * 4 : pfilename = pointer to the filename in - * csp->config->actions_file[] if found. Set to NULL on error. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if "filename" was not specified - * or is not valid. - * - *********************************************************************/ -static jb_err get_file_name_param(struct client_state *csp, - const struct map *parameters, - const char *param_name, - const char **pfilename) -{ - const char *param; - const char suffix[] = ".action"; - const char *s; - char *name; - char *fullpath; - char ch; - size_t len; - size_t name_size; - int i; - - assert(csp); - assert(parameters); - assert(pfilename); - - *pfilename = NULL; - - param = lookup(parameters, param_name); - if (!*param) - { - return JB_ERR_CGI_PARAMS; - } - - len = strlen(param); - if (len >= FILENAME_MAX) - { - /* Too long. */ - return JB_ERR_CGI_PARAMS; - } - - /* - * Check every character to see if it's legal. - * Totally unnecessary but we do it anyway. - */ - s = param; - while ((ch = *s++) != '\0') - { - if ( ((ch < 'A') || (ch > 'Z')) - && ((ch < 'a') || (ch > 'z')) - && ((ch < '0') || (ch > '9')) - && (ch != '-') - && (ch != '_') ) - { - /* Probable hack attempt. */ - return JB_ERR_CGI_PARAMS; - } - } - - /* Append extension */ - name_size = len + strlen(suffix) + 1; - name = malloc(name_size); - if (name == NULL) - { - return JB_ERR_MEMORY; - } - strlcpy(name, param, name_size); - strlcat(name, suffix, name_size); - - /* Prepend path */ - fullpath = make_path(csp->config->confdir, name); - free(name); - - if (fullpath == NULL) - { - return JB_ERR_MEMORY; - } - - /* Check if the file is known */ - for (i = 0; i < MAX_AF_FILES; i++) - { - if (NULL != csp->config->actions_file[i] && - !strcmp(fullpath, csp->config->actions_file[i])) - { - /* Success */ - *pfilename = csp->config->actions_file[i]; - freez(fullpath); - - return JB_ERR_OK; - } - } - freez(fullpath); - - return JB_ERR_CGI_PARAMS; -} - - -/********************************************************************* - * - * Function : get_url_spec_param - * - * Description : Get a URL pattern from the parameters - * passed to a CGI function. Removes leading/trailing - * spaces and validates it. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : parameters = map of cgi parameters - * 3 : name = Name of CGI parameter to read - * 4 : pvalue = destination for value. Will be malloc()'d. - * Set to NULL on error. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the parameter was not specified - * or is not valid. - * - *********************************************************************/ -static jb_err get_url_spec_param(struct client_state *csp, - const struct map *parameters, - const char *name, - char **pvalue) -{ - const char *orig_param; - char *param; - char *s; - struct url_spec compiled[1]; - jb_err err; - - assert(csp); - assert(parameters); - assert(name); - assert(pvalue); - - *pvalue = NULL; - - orig_param = lookup(parameters, name); - if (!*orig_param) - { - return JB_ERR_CGI_PARAMS; - } - - /* Copy and trim whitespace */ - param = strdup(orig_param); - if (param == NULL) - { - return JB_ERR_MEMORY; - } - chomp(param); - - /* Must be non-empty, and can't allow 1st character to be '{' */ - if (param[0] == '\0' || param[0] == '{') - { - free(param); - return JB_ERR_CGI_PARAMS; - } - - /* Check for embedded newlines */ - for (s = param; *s != '\0'; s++) - { - if ((*s == '\r') || (*s == '\n')) - { - free(param); - return JB_ERR_CGI_PARAMS; - } - } - - /* Check that regex is valid */ - s = strdup(param); - if (s == NULL) - { - free(param); - return JB_ERR_MEMORY; - } - err = create_url_spec(compiled, s); - free(s); - if (err) - { - free(param); - return (err == JB_ERR_MEMORY) ? JB_ERR_MEMORY : JB_ERR_CGI_PARAMS; - } - free_url_spec(compiled); - - if (param[strlen(param) - 1] == '\\') - { - /* - * Must protect trailing '\\' from becoming line continuation character. - * Two methods: 1) If it's a domain only, add a trailing '/'. - * 2) For path, add the do-nothing PCRE expression (?:) to the end - */ - if (strchr(param, '/') == NULL) - { - err = string_append(&param, "/"); - } - else - { - err = string_append(&param, "(?:)"); - } - if (err) - { - return err; - } - - /* Check that the modified regex is valid */ - s = strdup(param); - if (s == NULL) - { - free(param); - return JB_ERR_MEMORY; - } - err = create_url_spec(compiled, s); - free(s); - if (err) - { - free(param); - return (err == JB_ERR_MEMORY) ? JB_ERR_MEMORY : JB_ERR_CGI_PARAMS; - } - free_url_spec(compiled); - } - - *pvalue = param; - return JB_ERR_OK; -} - -/********************************************************************* - * - * Function : map_radio - * - * Description : Map a set of radio button values. E.g. if you have - * 3 radio buttons, declare them as: - * <option type="radio" name="xyz" @xyz-a@> - * <option type="radio" name="xyz" @xyz-b@> - * <option type="radio" name="xyz" @xyz-c@> - * Then map one of the @xyz-?@ variables to "checked" - * and all the others to empty by calling: - * map_radio(exports, "xyz", "abc", sel) - * Where 'sel' is 'a', 'b', or 'c'. - * - * Parameters : - * 1 : exports = Exports map to modify. - * 2 : optionname = name for map - * 3 : values = null-terminated list of values; - * 4 : value = Selected value. - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * - *********************************************************************/ -static jb_err map_radio(struct map * exports, - const char * optionname, - const char * values, - int value) -{ - char * buf; - char * p; - char c; - const size_t len = strlen(optionname); - const size_t buf_size = len + 3; - - assert(exports); - assert(optionname); - assert(values); - - buf = malloc(buf_size); - if (buf == NULL) - { - return JB_ERR_MEMORY; - } - - strlcpy(buf, optionname, buf_size); - - /* XXX: this looks ... interesting */ - p = buf + len; - *p++ = '-'; - p[1] = '\0'; - - while ((c = *values++) != '\0') - { - if (c != value) - { - *p = c; - if (map(exports, buf, 1, "", 1)) - { - return JB_ERR_MEMORY; - } - } - } - - *p = (char)value; - return map(exports, buf, 0, "checked", 1); -} - - -/********************************************************************* - * - * Function : cgi_error_modified - * - * Description : CGI function that is called when a file is modified - * outside the CGI editor. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : filename = The file that was modified. - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_modified(struct client_state *csp, - struct http_response *rsp, - const char *filename) -{ - struct map *exports; - jb_err err; - - assert(csp); - assert(rsp); - assert(filename); - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - err = map(exports, "f", 1, html_encode(filename), 0); - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "cgi-error-modified", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_error_parse - * - * Description : CGI function that is called when a file cannot - * be parsed by the CGI editor. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : file = The file that was modified. - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_parse(struct client_state *csp, - struct http_response *rsp, - struct editable_file *file) -{ - struct map *exports; - jb_err err; - struct file_line *cur_line; - - assert(csp); - assert(rsp); - assert(file); - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - err = map(exports, "f", 1, stringify(file->identifier), 0); - if (!err) err = map(exports, "parse-error", 1, html_encode(file->parse_error_text), 0); - - cur_line = file->parse_error; - assert(cur_line); - - if (!err) err = map(exports, "line-raw", 1, html_encode(cur_line->raw), 0); - if (!err) err = map(exports, "line-data", 1, html_encode(cur_line->unprocessed), 0); - - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "cgi-error-parse", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_error_file - * - * Description : CGI function that is called when a file cannot be - * opened by the CGI editor. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : filename = The file that was modified. - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_file(struct client_state *csp, - struct http_response *rsp, - const char *filename) -{ - struct map *exports; - jb_err err; - - assert(csp); - assert(rsp); - assert(filename); - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - err = map(exports, "f", 1, html_encode(filename), 0); - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "cgi-error-file", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_error_file_read_only - * - * Description : CGI function that is called when a file cannot be - * opened for writing by the CGI editor. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : filename = The file that we can't write to - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_file_read_only(struct client_state *csp, - struct http_response *rsp, - const char *filename) -{ - struct map *exports; - jb_err err; - - assert(csp); - assert(rsp); - assert(filename); - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - err = map(exports, "f", 1, html_encode(filename), 0); - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "cgi-error-file-read-only", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions - * - * Description : CGI function that allows the user to choose which - * actions file to edit. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error - * - *********************************************************************/ -jb_err cgi_edit_actions(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - (void)parameters; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - /* FIXME: Incomplete */ - - return cgi_redirect(rsp, CGI_PREFIX "edit-actions-list?f=default"); - -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_list - * - * Description : CGI function that edits the actions list. - * FIXME: This function shouldn't FATAL ever. - * FIXME: This function doesn't check the retval of map() - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : filename - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_FILE if the file cannot be opened or - * contains no data - * JB_ERR_CGI_PARAMS if "filename" was not specified - * or is not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_list(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - char * section_template; - char * url_template; - char * sections; - char * urls; - char buf[150]; - char * s; - struct map * exports; - struct map * section_exports; - struct map * url_exports; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number = 0; - unsigned prev_section_line_number = ((unsigned) (-1)); - int i, url_1_2; - struct file_list * fl; - struct url_actions * b; - char * buttons = NULL; - jb_err err; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - /* Load actions file */ - err = edit_read_actions_file(csp, rsp, parameters, 0, &file); - if (err) - { - /* No filename specified, can't read file, or out of memory. */ - free_map(exports); - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - /* Find start of actions in file */ - cur_line = file->lines; - line_number = 1; - while ((cur_line != NULL) && (cur_line->type != FILE_LINE_ACTION)) - { - cur_line = cur_line->next; - line_number++; - } - - /* - * Conventional actions files should have a match all block - * at the start: - * cur_line = {...global actions...} - * cur_line->next = / - * cur_line->next->next = {...actions...} or EOF - */ - if ( (cur_line != NULL) - && (cur_line->type == FILE_LINE_ACTION) - && (cur_line->next != NULL) - && (cur_line->next->type == FILE_LINE_URL) - && (0 == strcmp(cur_line->next->unprocessed, "/")) - && ( (cur_line->next->next == NULL) - || (cur_line->next->next->type != FILE_LINE_URL) - ) ) - { - /* - * Generate string with buttons to set actions for "/" to - * any predefined set of actions (named standard.*, probably - * residing in standard.action). - */ - - err = template_load(csp, &section_template, "edit-actions-list-button", 0); - if (err) - { - edit_free_file(file); - free_map(exports); - if (err == JB_ERR_FILE) - { - return cgi_error_no_template(csp, rsp, "edit-actions-list-button"); - } - return err; - } - - err = template_fill(&section_template, exports); - if (err) - { - edit_free_file(file); - free_map(exports); - return err; - } - - buttons = strdup(""); - for (i = 0; i < MAX_AF_FILES; i++) - { - if (((fl = csp->actions_list[i]) != NULL) && ((b = fl->f) != NULL)) - { - for (b = b->next; NULL != b; b = b->next) - { - if (!strncmp(b->url->spec, "standard.", 9) && *(b->url->spec + 9) != '\0') - { - if (err || (NULL == (section_exports = new_map()))) - { - freez(buttons); - free(section_template); - edit_free_file(file); - free_map(exports); - return JB_ERR_MEMORY; - } - - err = map(section_exports, "button-name", 1, b->url->spec + 9, 1); - - if (err || (NULL == (s = strdup(section_template)))) - { - free_map(section_exports); - freez(buttons); - free(section_template); - edit_free_file(file); - free_map(exports); - return JB_ERR_MEMORY; - } - - if (!err) err = template_fill(&s, section_exports); - free_map(section_exports); - if (!err) err = string_join(&buttons, s); - } - } - } - } - freez(section_template); - if (!err) err = map(exports, "all-urls-buttons", 1, buttons, 0); - - /* - * Conventional actions file, supply extra editing help. - * (e.g. don't allow them to make it an unconventional one). - */ - if (!err) err = map_conditional(exports, "all-urls-present", 1); - - snprintf(buf, sizeof(buf), "%d", line_number); - if (!err) err = map(exports, "all-urls-s", 1, buf, 1); - snprintf(buf, sizeof(buf), "%d", line_number + 2); - if (!err) err = map(exports, "all-urls-s-next", 1, buf, 1); - if (!err) err = map(exports, "all-urls-actions", 1, - actions_to_html(csp, cur_line->data.action), 0); - - /* Skip the 2 lines */ - cur_line = cur_line->next->next; - line_number += 2; - - /* - * Note that prev_section_line_number is NOT set here. - * This is deliberate and not a bug. It stops a "Move up" - * option appearing on the next section. Clicking "Move - * up" would make the actions file unconventional, which - * we don't want, so we hide this option. - */ - } - else - { - /* - * Non-standard actions file - does not begin with - * the "All URLs" section. - */ - if (!err) err = map_conditional(exports, "all-urls-present", 0); - } - - /* Set up global exports */ - - if (!err) err = map(exports, "actions-file", 1, html_encode(file->filename), 0); - if (!err) err = map(exports, "f", 1, stringify(file->identifier), 0); - if (!err) err = map(exports, "v", 1, file->version_str, 1); - - /* Discourage private additions to default.action */ - - if (!err) err = map_conditional(exports, "default-action", - (strstr("default.action", file->filename) != NULL)); - if (err) - { - edit_free_file(file); - free_map(exports); - return err; - } - - /* Should do all global exports above this point */ - - /* Load templates */ - - err = template_load(csp, &section_template, "edit-actions-list-section", 0); - if (err) - { - edit_free_file(file); - free_map(exports); - if (err == JB_ERR_FILE) - { - return cgi_error_no_template(csp, rsp, "edit-actions-list-section"); - } - return err; - } - - err = template_load(csp, &url_template, "edit-actions-list-url", 0); - if (err) - { - free(section_template); - edit_free_file(file); - free_map(exports); - if (err == JB_ERR_FILE) - { - return cgi_error_no_template(csp, rsp, "edit-actions-list-url"); - } - return err; - } - - err = template_fill(&section_template, exports); - if (err) - { - free(url_template); - edit_free_file(file); - free_map(exports); - return err; - } - - err = template_fill(&url_template, exports); - if (err) - { - free(section_template); - edit_free_file(file); - free_map(exports); - return err; - } - - if (NULL == (sections = strdup(""))) - { - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - return JB_ERR_MEMORY; - } - - while ((cur_line != NULL) && (cur_line->type == FILE_LINE_ACTION)) - { - if (NULL == (section_exports = new_map())) - { - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - return JB_ERR_MEMORY; - } - - snprintf(buf, sizeof(buf), "%d", line_number); - err = map(section_exports, "s", 1, buf, 1); - if (!err) err = map(section_exports, "actions", 1, - actions_to_html(csp, cur_line->data.action), 0); - - if ( (!err) - && (cur_line->next != NULL) - && (cur_line->next->type == FILE_LINE_URL)) - { - /* This section contains at least one URL, don't allow delete */ - err = map_block_killer(section_exports, "empty-section"); - } - else - { - if (!err) err = map_block_keep(section_exports, "empty-section"); - } - - if (prev_section_line_number != ((unsigned)(-1))) - { - /* Not last section */ - snprintf(buf, sizeof(buf), "%d", prev_section_line_number); - if (!err) err = map(section_exports, "s-prev", 1, buf, 1); - if (!err) err = map_block_keep(section_exports, "s-prev-exists"); - } - else - { - /* Last section */ - if (!err) err = map_block_killer(section_exports, "s-prev-exists"); - } - prev_section_line_number = line_number; - - if (err) - { - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - return err; - } - - /* Should do all section-specific exports above this point */ - - if (NULL == (urls = strdup(""))) - { - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - return JB_ERR_MEMORY; - } - - url_1_2 = 2; - - cur_line = cur_line->next; - line_number++; - - while ((cur_line != NULL) && (cur_line->type == FILE_LINE_URL)) - { - if (NULL == (url_exports = new_map())) - { - free(urls); - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - return JB_ERR_MEMORY; - } - - snprintf(buf, sizeof(buf), "%d", line_number); - err = map(url_exports, "p", 1, buf, 1); - - snprintf(buf, sizeof(buf), "%d", url_1_2); - if (!err) err = map(url_exports, "url-1-2", 1, buf, 1); - - if (!err) err = map(url_exports, "url-html", 1, - html_encode(cur_line->unprocessed), 0); - if (!err) err = map(url_exports, "url", 1, - url_encode(cur_line->unprocessed), 0); - - if (err) - { - free(urls); - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - free_map(url_exports); - return err; - } - - if (NULL == (s = strdup(url_template))) - { - free(urls); - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - free_map(url_exports); - return JB_ERR_MEMORY; - } - - err = template_fill(&s, section_exports); - if (!err) err = template_fill(&s, url_exports); - if (!err) err = string_append(&urls, s); - - free_map(url_exports); - freez(s); - - if (err) - { - freez(urls); - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - return err; - } - - url_1_2 = 3 - url_1_2; - - cur_line = cur_line->next; - line_number++; - } - - err = map(section_exports, "urls", 1, urls, 0); - - /* Could also do section-specific exports here, but it wouldn't be as fast */ - - snprintf(buf, sizeof(buf), "%d", line_number); - if (!err) err = map(section_exports, "s-next", 1, buf, 1); - - if ( (cur_line != NULL) - && (cur_line->type == FILE_LINE_ACTION)) - { - /* Not last section */ - if (!err) err = map_block_keep(section_exports, "s-next-exists"); - } - else - { - /* Last section */ - if (!err) err = map_block_killer(section_exports, "s-next-exists"); - } - - if (err) - { - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - return err; - } - - if (NULL == (s = strdup(section_template))) - { - free(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - free_map(section_exports); - return JB_ERR_MEMORY; - } - - err = template_fill(&s, section_exports); - if (!err) err = string_append(&sections, s); - - freez(s); - free_map(section_exports); - - if (err) - { - freez(sections); - free(section_template); - free(url_template); - edit_free_file(file); - free_map(exports); - return err; - } - } - - edit_free_file(file); - free(section_template); - free(url_template); - - err = map(exports, "sections", 1, sections, 0); - if (err) - { - free_map(exports); - return err; - } - - /* Could also do global exports here, but it wouldn't be as fast */ - - return template_fill_for_cgi(csp, "edit-actions-list", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_for_url - * - * Description : CGI function that edits the Actions list. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_for_url(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map * exports; - unsigned sectionid; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number; - jb_err err; - struct re_filterfile_spec *filter_group; - int i, have_filters = 0; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "s", &sectionid); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - cur_line = file->lines; - - for (line_number = 1; (cur_line != NULL) && (line_number < sectionid); line_number++) - { - cur_line = cur_line->next; - } - - if ( (cur_line == NULL) - || (line_number != sectionid) - || (sectionid < 1) - || (cur_line->type != FILE_LINE_ACTION)) - { - /* Invalid "sectionid" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - if (NULL == (exports = default_exports(csp, NULL))) - { - edit_free_file(file); - return JB_ERR_MEMORY; - } - - err = map(exports, "f", 1, stringify(file->identifier), 0); - if (!err) err = map(exports, "v", 1, file->version_str, 1); - if (!err) err = map(exports, "s", 1, url_encode(lookup(parameters, "s")), 0); - - if (!err) err = actions_to_radio(exports, cur_line->data.action); - - /* - * XXX: Some browsers (at least IE6 and IE7) have an artifical URL - * length limitation and ignore clicks on the Submit buttons if - * the resulting GET URL would be longer than their limit. - * - * In Privoxy 3.0.5 beta the standard edit-actions-for-url template - * reached this limit and action editing stopped working in these - * browsers (BR #1570678). - * - * The config option split-large-forms works around this browser - * bug (HTTP has no URL lenght limitation) by deviding the action - * list form into multiple smaller ones. It means the URLs are shorter - * and work in broken browsers as well, but the user can no longer change - * all actions with one submit. - * - * A better solution would be to switch to POST requests, - * but this will do for now. - */ - if(!err && (csp->config->feature_flags & RUNTIME_FEATURE_SPLIT_LARGE_FORMS)) - { - /* Generate multiple smaller form by killing the big one. */ - err = map_block_killer(exports, "one-form-only"); - } - else - { - /* Default: Generate one large form by killing the smaller ones. */ - err = map_block_killer(exports, "multiple-forms"); - } - - for (i = 0; i < MAX_AF_FILES; i++) - { - if ((csp->rlist[i] != NULL) && (csp->rlist[i]->f != NULL)) - { - if (!err) err = map_conditional(exports, "any-filters-defined", 1); - have_filters = 1; - break; - } - } - - if (err) - { - edit_free_file(file); - free_map(exports); - return err; - } - - if (0 == have_filters) - { - err = map(exports, "filter-params", 1, "", 1); - } - else - { - /* - * List available filters and their settings. - */ - char *filter_template; - int filter_identifier = 0; - char *prepared_templates[MAX_FILTER_TYPES]; - - for (i = 0; i < MAX_FILTER_TYPES; i++) - { - prepared_templates[i] = strdup(""); - } - - err = template_load(csp, &filter_template, "edit-actions-for-url-filter", 0); - if (err) - { - edit_free_file(file); - free_map(exports); - if (err == JB_ERR_FILE) - { - return cgi_error_no_template(csp, rsp, "edit-actions-for-url-filter"); - } - return err; - } - - err = template_fill(&filter_template, exports); - - for (i = 0; i < MAX_AF_FILES; i++) - { - if ((csp->rlist[i] != NULL) && (csp->rlist[i]->f != NULL)) - { - filter_group = csp->rlist[i]->f; - for (;(!err) && (filter_group != NULL); filter_group = filter_group->next) - { - char current_mode = 'x'; - char number[20]; - struct list_entry *filter_name; - struct map *line_exports; - const int type = filter_group->type; - const int multi_action_index = filter_type_info[type].multi_action_index; - - assert(type < MAX_FILTER_TYPES); - - filter_name = cur_line->data.action->multi_add[multi_action_index]->first; - while ((filter_name != NULL) - && (0 != strcmp(filter_group->name, filter_name->str))) - { - filter_name = filter_name->next; - } - - if (filter_name != NULL) - { - current_mode = 'y'; - } - else - { - filter_name = cur_line->data.action->multi_remove[multi_action_index]->first; - while ((filter_name != NULL) - && (0 != strcmp(filter_group->name, filter_name->str))) - { - filter_name = filter_name->next; - } - if (filter_name != NULL) - { - current_mode = 'n'; - } - } - - /* Generate a unique serial number */ - snprintf(number, sizeof(number), "%x", filter_identifier++); - number[sizeof(number) - 1] = '\0'; - - line_exports = new_map(); - if (line_exports == NULL) - { - err = JB_ERR_MEMORY; - } - else - { - char *filter_line; - - if (!err) err = map(line_exports, "index", 1, number, 1); - if (!err) err = map(line_exports, "name", 1, filter_group->name, 1); - if (!err) err = map(line_exports, "description", 1, filter_group->description, 1); - if (!err) err = map_radio(line_exports, "this-filter", "ynx", current_mode); - if (!err) err = map(line_exports, "filter-type", 1, filter_type_info[type].type, 1); - if (!err) err = map(line_exports, "abbr-filter-type", 1, filter_type_info[type].abbr_type, 1); - if (!err) err = map(line_exports, "anchor", 1, filter_type_info[type].anchor, 1); - - if (!err) - { - filter_line = strdup(filter_template); - if (filter_line == NULL) err = JB_ERR_MEMORY; - } - if (!err) err = template_fill(&filter_line, line_exports); - string_join(&prepared_templates[type], filter_line); - - free_map(line_exports); - } - } - } - } - freez(filter_template); - - /* Replace all filter macros with the aggregated templates */ - for (i = 0; i < MAX_FILTER_TYPES; i++) - { - if (err) break; - err = map(exports, filter_type_info[i].macro_name, 1, prepared_templates[i], 0); - } - - if (err) - { - /* Free aggregated templates */ - for (i = 0; i < MAX_FILTER_TYPES; i++) - { - freez(prepared_templates[i]); - } - } - } - - /* Check or uncheck the "disable all of this type" radio buttons. */ - for (i = 0; i < MAX_FILTER_TYPES; i++) - { - const int a = filter_type_info[i].multi_action_index; - const int disable_all = cur_line->data.action->multi_remove_all[a]; - if (err) break; - err = map_radio(exports, filter_type_info[i].disable_all_option, "nx", (disable_all ? 'n' : 'x')); - } - - edit_free_file(file); - - if (err) - { - free_map(exports); - return err; - } - - return template_fill_for_cgi(csp, "edit-actions-for-url", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_submit - * - * Description : CGI function that actually edits the Actions list. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_submit(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned sectionid; - char * actiontext; - char * newtext; - size_t newtext_size; - size_t len; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number; - char target[1024]; - jb_err err; - int filter_identifier; - int i; - const char * action_set_name; - struct file_list * fl; - struct url_actions * b; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "s", &sectionid); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - cur_line = file->lines; - - for (line_number = 1; (cur_line != NULL) && (line_number < sectionid); line_number++) - { - cur_line = cur_line->next; - } - - if ( (cur_line == NULL) - || (line_number != sectionid) - || (sectionid < 1) - || (cur_line->type != FILE_LINE_ACTION)) - { - /* Invalid "sectionid" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - get_string_param(parameters, "p", &action_set_name); - if (action_set_name != NULL) - { - for (filter_identifier = 0; filter_identifier < MAX_AF_FILES; filter_identifier++) - { - if (((fl = csp->actions_list[filter_identifier]) != NULL) && ((b = fl->f) != NULL)) - { - for (b = b->next; NULL != b; b = b->next) - { - if (!strncmp(b->url->spec, "standard.", 9) && !strcmp(b->url->spec + 9, action_set_name)) - { - copy_action(cur_line->data.action, b->action); - goto found; - } - } - } - } - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - - found: ; - } - else - { - err = actions_from_radio(parameters, cur_line->data.action); - } - - if (err) - { - /* Out of memory */ - edit_free_file(file); - return err; - } - - /* Check the "disable all of this type" parameters. */ - for (i = 0; i < MAX_FILTER_TYPES; i++) - { - const int multi_action_index = filter_type_info[i].multi_action_index; - const char ch = get_char_param(parameters, filter_type_info[i].disable_all_param); - - if (ch == 'N') - { - list_remove_all(cur_line->data.action->multi_add[multi_action_index]); - list_remove_all(cur_line->data.action->multi_remove[multi_action_index]); - cur_line->data.action->multi_remove_all[multi_action_index] = 1; - } - else if (ch == 'X') - { - cur_line->data.action->multi_remove_all[multi_action_index] = 0; - } - } - - for (filter_identifier = 0; !err; filter_identifier++) - { - char key_value[30]; - char key_name[30]; - char key_type[30]; - const char *name; - char value; /* - * Filter state. Valid states are: 'Y' (active), - * 'N' (inactive) and 'X' (no change). - * XXX: bad name. - */ - char type; /* - * Abbreviated filter type. Valid types are: 'F' (content filter), - * 'S' (server-header filter) and 'C' (client-header filter). - */ - int multi_action_index = 0; - - /* Generate the keys */ - snprintf(key_value, sizeof(key_value), "filter_r%x", filter_identifier); - key_value[sizeof(key_value) - 1] = '\0'; /* XXX: Why? */ - snprintf(key_name, sizeof(key_name), "filter_n%x", filter_identifier); - key_name[sizeof(key_name) - 1] = '\0'; /* XXX: Why? */ - snprintf(key_type, sizeof(key_type), "filter_t%x", filter_identifier); - - err = get_string_param(parameters, key_name, &name); - if (err) break; - - if (name == NULL) - { - /* End of list */ - break; - } - - type = get_char_param(parameters, key_type); - switch (type) - { - case 'F': - multi_action_index = ACTION_MULTI_FILTER; - break; - case 'S': - multi_action_index = ACTION_MULTI_SERVER_HEADER_FILTER; - break; - case 'C': - multi_action_index = ACTION_MULTI_CLIENT_HEADER_FILTER; - break; - case 'L': - multi_action_index = ACTION_MULTI_CLIENT_HEADER_TAGGER; - break; - case 'E': - multi_action_index = ACTION_MULTI_SERVER_HEADER_TAGGER; - break; - default: - log_error(LOG_LEVEL_ERROR, - "Unknown filter type: %c for filter %s. Filter ignored.", type, name); - continue; - } - assert(multi_action_index); - - value = get_char_param(parameters, key_value); - if (value == 'Y') - { - list_remove_item(cur_line->data.action->multi_add[multi_action_index], name); - if (!err) err = enlist(cur_line->data.action->multi_add[multi_action_index], name); - list_remove_item(cur_line->data.action->multi_remove[multi_action_index], name); - } - else if (value == 'N') - { - list_remove_item(cur_line->data.action->multi_add[multi_action_index], name); - if (!cur_line->data.action->multi_remove_all[multi_action_index]) - { - list_remove_item(cur_line->data.action->multi_remove[multi_action_index], name); - if (!err) err = enlist(cur_line->data.action->multi_remove[multi_action_index], name); - } - } - else if (value == 'X') - { - list_remove_item(cur_line->data.action->multi_add[multi_action_index], name); - list_remove_item(cur_line->data.action->multi_remove[multi_action_index], name); - } - } - - if(err) - { - /* Out of memory */ - edit_free_file(file); - return err; - } - - if (NULL == (actiontext = actions_to_text(cur_line->data.action))) - { - /* Out of memory */ - edit_free_file(file); - return JB_ERR_MEMORY; - } - - len = strlen(actiontext); - if (len == 0) - { - /* - * Empty action - must special-case this. - * Simply setting len to 1 is sufficient... - */ - len = 1; - } - - newtext_size = len + 2; - if (NULL == (newtext = malloc(newtext_size))) - { - /* Out of memory */ - free(actiontext); - edit_free_file(file); - return JB_ERR_MEMORY; - } - strlcpy(newtext, actiontext, newtext_size); - free(actiontext); - newtext[0] = '{'; - newtext[len] = '}'; - newtext[len + 1] = '\0'; - - freez(cur_line->raw); - freez(cur_line->unprocessed); - cur_line->unprocessed = newtext; - - err = edit_write_file(file); - if (err) - { - /* Error writing file */ - if (err == JB_ERR_FILE) - { - /* Read-only file. */ - err = cgi_error_file_read_only(csp, rsp, file->filename); - } - edit_free_file(file); - return err; - } - - snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d", - (long) time(NULL), file->identifier, sectionid); - - edit_free_file(file); - - return cgi_redirect(rsp, target); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_url - * - * Description : CGI function that actually edits a URL pattern in - * an actions file. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * filename : Identifies the file to edit - * ver : File's last-modified time - * section : Line number of section to edit - * pattern : Line number of pattern to edit - * newval : New value for pattern - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_url(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned patternid; - char * new_pattern; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number; - unsigned section_start_line_number = 0; - char target[1024]; - jb_err err; - - assert(csp); - assert(rsp); - assert(parameters); - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "p", &patternid); - if (err) - { - return err; - } - if (patternid < 1U) - { - return JB_ERR_CGI_PARAMS; - } - - err = get_url_spec_param(csp, parameters, "u", &new_pattern); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - free(new_pattern); - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - line_number = 1; - cur_line = file->lines; - - while ((cur_line != NULL) && (line_number < patternid)) - { - if (cur_line->type == FILE_LINE_ACTION) - { - section_start_line_number = line_number; - } - cur_line = cur_line->next; - line_number++; - } - - if ( (cur_line == NULL) - || (cur_line->type != FILE_LINE_URL)) - { - /* Invalid "patternid" parameter */ - free(new_pattern); - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - /* At this point, the line to edit is in cur_line */ - - freez(cur_line->raw); - freez(cur_line->unprocessed); - cur_line->unprocessed = new_pattern; - - err = edit_write_file(file); - if (err) - { - /* Error writing file */ - if (err == JB_ERR_FILE) - { - /* Read-only file. */ - err = cgi_error_file_read_only(csp, rsp, file->filename); - } - edit_free_file(file); - return err; - } - - snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d", - (long) time(NULL), file->identifier, section_start_line_number); - - edit_free_file(file); - - return cgi_redirect(rsp, target); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_add_url - * - * Description : CGI function that actually adds a URL pattern to - * an actions file. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * filename : Identifies the file to edit - * ver : File's last-modified time - * section : Line number of section to edit - * newval : New pattern - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_add_url(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned sectionid; - char * new_pattern; - struct file_line * new_line; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number; - char target[1024]; - jb_err err; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "s", &sectionid); - if (err) - { - return err; - } - if (sectionid < 1U) - { - return JB_ERR_CGI_PARAMS; - } - - err = get_url_spec_param(csp, parameters, "u", &new_pattern); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - free(new_pattern); - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - line_number = 1; - cur_line = file->lines; - - while ((cur_line != NULL) && (line_number < sectionid)) - { - cur_line = cur_line->next; - line_number++; - } - - if ( (cur_line == NULL) - || (cur_line->type != FILE_LINE_ACTION)) - { - /* Invalid "sectionid" parameter */ - free(new_pattern); - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - /* At this point, the section header is in cur_line - add after this. */ - - /* Allocate the new line */ - new_line = (struct file_line *)zalloc(sizeof(*new_line)); - if (new_line == NULL) - { - free(new_pattern); - edit_free_file(file); - return JB_ERR_MEMORY; - } - - /* Fill in the data members of the new line */ - new_line->raw = NULL; - new_line->prefix = NULL; - new_line->unprocessed = new_pattern; - new_line->type = FILE_LINE_URL; - - /* Link new_line into the list, after cur_line */ - new_line->next = cur_line->next; - cur_line->next = new_line; - - /* Done making changes, now commit */ - - err = edit_write_file(file); - if (err) - { - /* Error writing file */ - if (err == JB_ERR_FILE) - { - /* Read-only file. */ - err = cgi_error_file_read_only(csp, rsp, file->filename); - } - edit_free_file(file); - return err; - } - - snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d", - (long) time(NULL), file->identifier, sectionid); - - edit_free_file(file); - - return cgi_redirect(rsp, target); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_remove_url - * - * Description : CGI function that actually removes a URL pattern from - * the actions file. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * f : (filename) Identifies the file to edit - * v : (version) File's last-modified time - * p : (pattern) Line number of pattern to remove - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_remove_url(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned patternid; - struct editable_file * file; - struct file_line * cur_line; - struct file_line * prev_line; - unsigned line_number; - unsigned section_start_line_number = 0; - char target[1024]; - jb_err err; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "p", &patternid); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - line_number = 1; - prev_line = NULL; - cur_line = file->lines; - - while ((cur_line != NULL) && (line_number < patternid)) - { - if (cur_line->type == FILE_LINE_ACTION) - { - section_start_line_number = line_number; - } - prev_line = cur_line; - cur_line = cur_line->next; - line_number++; - } - - if ( (cur_line == NULL) - || (prev_line == NULL) - || (cur_line->type != FILE_LINE_URL)) - { - /* Invalid "patternid" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - /* At this point, the line to remove is in cur_line, and the previous - * one is in prev_line - */ - - /* Unlink cur_line */ - prev_line->next = cur_line->next; - cur_line->next = NULL; - - /* Free cur_line */ - edit_free_file_lines(cur_line); - - err = edit_write_file(file); - if (err) - { - /* Error writing file */ - if (err == JB_ERR_FILE) - { - /* Read-only file. */ - err = cgi_error_file_read_only(csp, rsp, file->filename); - } - edit_free_file(file); - return err; - } - - snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d", - (long) time(NULL), file->identifier, section_start_line_number); - - edit_free_file(file); - - return cgi_redirect(rsp, target); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_section_remove - * - * Description : CGI function that actually removes a whole section from - * the actions file. The section must be empty first - * (else JB_ERR_CGI_PARAMS). - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * f : (filename) Identifies the file to edit - * v : (version) File's last-modified time - * s : (section) Line number of section to edit - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_section_remove(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned sectionid; - struct editable_file * file; - struct file_line * cur_line; - struct file_line * prev_line; - unsigned line_number; - char target[1024]; - jb_err err; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "s", &sectionid); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - line_number = 1; - cur_line = file->lines; - - prev_line = NULL; - while ((cur_line != NULL) && (line_number < sectionid)) - { - prev_line = cur_line; - cur_line = cur_line->next; - line_number++; - } - - if ( (cur_line == NULL) - || (cur_line->type != FILE_LINE_ACTION) ) - { - /* Invalid "sectionid" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - if ( (cur_line->next != NULL) - && (cur_line->next->type == FILE_LINE_URL) ) - { - /* Section not empty. */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - /* At this point, the line to remove is in cur_line, and the previous - * one is in prev_line - */ - - /* Unlink cur_line */ - if (prev_line == NULL) - { - /* Removing the first line from the file */ - file->lines = cur_line->next; - } - else - { - prev_line->next = cur_line->next; - } - cur_line->next = NULL; - - /* Free cur_line */ - edit_free_file_lines(cur_line); - - err = edit_write_file(file); - if (err) - { - /* Error writing file */ - if (err == JB_ERR_FILE) - { - /* Read-only file. */ - err = cgi_error_file_read_only(csp, rsp, file->filename); - } - edit_free_file(file); - return err; - } - - snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i", - (long) time(NULL), file->identifier); - - edit_free_file(file); - - return cgi_redirect(rsp, target); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_section_add - * - * Description : CGI function that adds a new empty section to - * an actions file. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * f : (filename) Identifies the file to edit - * v : (version) File's last-modified time - * s : (section) Line number of section to add after, 0 for - * start of file. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_section_add(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned sectionid; - struct file_line * new_line; - char * new_text; - struct editable_file * file; - struct file_line * cur_line; - unsigned line_number; - char target[1024]; - jb_err err; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "s", &sectionid); - if (err) - { - return err; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - line_number = 1; - cur_line = file->lines; - - if (sectionid <= 1U) - { - /* Add to start of file */ - if (cur_line != NULL && cur_line->type != FILE_LINE_ACTION) - { - /* There's something in the file, find the line before the first - * action. - */ - while ( (cur_line->next != NULL) - && (cur_line->next->type != FILE_LINE_ACTION) ) - { - cur_line = cur_line->next; - line_number++; - } - } - else - { - /* File starts with action line, so insert at top */ - cur_line = NULL; - } - } - else - { - /* Add after stated section. */ - while ((cur_line != NULL) && (line_number < sectionid)) - { - cur_line = cur_line->next; - line_number++; - } - - if ( (cur_line == NULL) - || (cur_line->type != FILE_LINE_ACTION)) - { - /* Invalid "sectionid" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - /* Skip through the section to find the last line in it. */ - while ( (cur_line->next != NULL) - && (cur_line->next->type != FILE_LINE_ACTION) ) - { - cur_line = cur_line->next; - line_number++; - } - } - - /* At this point, the last line in the previous section is in cur_line - * - add after this. (Or if we need to add as the first line, cur_line - * will be NULL). - */ - - new_text = strdup("{}"); - if (NULL == new_text) - { - edit_free_file(file); - return JB_ERR_MEMORY; - } - - /* Allocate the new line */ - new_line = (struct file_line *)zalloc(sizeof(*new_line)); - if (new_line == NULL) - { - free(new_text); - edit_free_file(file); - return JB_ERR_MEMORY; - } - - /* Fill in the data members of the new line */ - new_line->raw = NULL; - new_line->prefix = NULL; - new_line->unprocessed = new_text; - new_line->type = FILE_LINE_ACTION; - - if (cur_line != NULL) - { - /* Link new_line into the list, after cur_line */ - new_line->next = cur_line->next; - cur_line->next = new_line; - } - else - { - /* Link new_line into the list, as first line */ - new_line->next = file->lines; - file->lines = new_line; - } - - /* Done making changes, now commit */ - - err = edit_write_file(file); - if (err) - { - /* Error writing file */ - if (err == JB_ERR_FILE) - { - /* Read-only file. */ - err = cgi_error_file_read_only(csp, rsp, file->filename); - } - edit_free_file(file); - return err; - } - - snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i", - (long) time(NULL), file->identifier); - - edit_free_file(file); - - return cgi_redirect(rsp, target); -} - - -/********************************************************************* - * - * Function : cgi_edit_actions_section_swap - * - * Description : CGI function that swaps the order of two sections - * in the actions file. Note that this CGI can actually - * swap any two arbitrary sections, but the GUI interface - * currently only allows consecutive sections to be - * specified. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * f : (filename) Identifies the file to edit - * v : (version) File's last-modified time - * s1 : (section1) Line number of first section to swap - * s2 : (section2) Line number of second section to swap - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_CGI_PARAMS if the CGI parameters are not - * specified or not valid. - * - *********************************************************************/ -jb_err cgi_edit_actions_section_swap(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned section1; - unsigned section2; - struct editable_file * file; - struct file_line * cur_line; - struct file_line * prev_line; - struct file_line * line_before_section1; - struct file_line * line_start_section1; - struct file_line * line_end_section1; - struct file_line * line_after_section1; - struct file_line * line_before_section2; - struct file_line * line_start_section2; - struct file_line * line_end_section2; - struct file_line * line_after_section2; - unsigned line_number; - char target[1024]; - jb_err err; - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - return cgi_error_disabled(csp, rsp); - } - - err = get_number_param(csp, parameters, "s1", &section1); - if (!err) err = get_number_param(csp, parameters, "s2", &section2); - if (err) - { - return err; - } - - if (section1 > section2) - { - unsigned temp = section2; - section2 = section1; - section1 = temp; - } - - err = edit_read_actions_file(csp, rsp, parameters, 1, &file); - if (err) - { - /* No filename specified, can't read file, modified, or out of memory. */ - return (err == JB_ERR_FILE ? JB_ERR_OK : err); - } - - /* Start at the beginning... */ - line_number = 1; - cur_line = file->lines; - prev_line = NULL; - - /* ... find section1 ... */ - while ((cur_line != NULL) && (line_number < section1)) - { - prev_line = cur_line; - cur_line = cur_line->next; - line_number++; - } - - if ( (cur_line == NULL) - || (cur_line->type != FILE_LINE_ACTION) ) - { - /* Invalid "section1" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - /* If no-op, we've validated params and can skip the rest. */ - if (section1 != section2) - { - /* ... find the end of section1 ... */ - line_before_section1 = prev_line; - line_start_section1 = cur_line; - do - { - prev_line = cur_line; - cur_line = cur_line->next; - line_number++; - } - while ((cur_line != NULL) && (cur_line->type == FILE_LINE_URL)); - line_end_section1 = prev_line; - line_after_section1 = cur_line; - - /* ... find section2 ... */ - while ((cur_line != NULL) && (line_number < section2)) - { - prev_line = cur_line; - cur_line = cur_line->next; - line_number++; - } - - if ( (cur_line == NULL) - || (cur_line->type != FILE_LINE_ACTION) ) - { - /* Invalid "section2" parameter */ - edit_free_file(file); - return JB_ERR_CGI_PARAMS; - } - - /* ... find the end of section2 ... */ - line_before_section2 = prev_line; - line_start_section2 = cur_line; - do - { - prev_line = cur_line; - cur_line = cur_line->next; - line_number++; - } - while ((cur_line != NULL) && (cur_line->type == FILE_LINE_URL)); - line_end_section2 = prev_line; - line_after_section2 = cur_line; - - /* Now have all the pointers we need. Do the swap. */ - - /* Change the pointer to section1 to point to section2 instead */ - if (line_before_section1 == NULL) - { - file->lines = line_start_section2; - } - else - { - line_before_section1->next = line_start_section2; - } - - if (line_before_section2 == line_end_section1) - { - /* Consecutive sections */ - line_end_section2->next = line_start_section1; - } - else - { - line_end_section2->next = line_after_section1; - line_before_section2->next = line_start_section1; - } - - /* Set the pointer from the end of section1 to the rest of the file */ - line_end_section1->next = line_after_section2; - - err = edit_write_file(file); - if (err) - { - /* Error writing file */ - if (err == JB_ERR_FILE) - { - /* Read-only file. */ - err = cgi_error_file_read_only(csp, rsp, file->filename); - } - edit_free_file(file); - return err; - } - } /* END if (section1 != section2) */ - - snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i", - (long) time(NULL), file->identifier); - - edit_free_file(file); - - return cgi_redirect(rsp, target); -} - - -/********************************************************************* - * - * Function : javascriptify - * - * Description : Converts a string into a form JavaScript will like. - * - * Netscape 4's JavaScript sucks - it doesn't use - * "id" parameters, so you have to set the "name" - * used to submit a form element to something JavaScript - * will like. (Or access the elements by index in an - * array. That array contains >60 elements and will - * be changed whenever we add a new action to the - * editor, so I'm NOT going to use indexes that have - * to be figured out by hand.) - * - * Currently the only thing we have to worry about - * is "-" ==> "_" conversion. - * - * This is a length-preserving operation so it is - * carried out in-place, no memory is allocated - * or freed. - * - * Parameters : - * 1 : identifier = String to make JavaScript-friendly. - * - * Returns : N/A - * - *********************************************************************/ -static void javascriptify(char * identifier) -{ - char * p = identifier; - while (NULL != (p = strchr(p, '-'))) - { - *p++ = '_'; - } -} - - -/********************************************************************* - * - * Function : actions_to_radio - * - * Description : Converts a actionsfile entry into settings for - * radio buttons and edit boxes on a HTML form. - * - * Parameters : - * 1 : exports = List of substitutions to add to. - * 2 : action = Action to read - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * - *********************************************************************/ -static jb_err actions_to_radio(struct map * exports, - const struct action_spec *action) -{ - unsigned long mask; - unsigned long add; - int mapped_param; - int checked; - char current_mode; - - assert(exports); - assert(action); - - mask = action->mask; - add = action->add; - - /* sanity - prevents "-feature +feature" */ - mask |= add; - - -#define DEFINE_ACTION_BOOL(name, bit) \ - if (!(mask & bit)) \ - { \ - current_mode = 'n'; \ - } \ - else if (add & bit) \ - { \ - current_mode = 'y'; \ - } \ - else \ - { \ - current_mode = 'x'; \ - } \ - if (map_radio(exports, name, "ynx", current_mode)) \ - { \ - return JB_ERR_MEMORY; \ - } - -#define DEFINE_ACTION_STRING(name, bit, index) \ - DEFINE_ACTION_BOOL(name, bit); \ - mapped_param = 0; - -#define DEFINE_CGI_PARAM_RADIO(name, bit, index, value, is_default) \ - if (add & bit) \ - { \ - checked = !strcmp(action->string[index], value); \ - } \ - else \ - { \ - checked = is_default; \ - } \ - mapped_param |= checked; \ - if (map(exports, name "-param-" value, 1, (checked ? "checked" : ""), 1)) \ - { \ - return JB_ERR_MEMORY; \ - } - -#define DEFINE_CGI_PARAM_CUSTOM(name, bit, index, default_val) \ - if (map(exports, name "-param-custom", 1, \ - ((!mapped_param) ? "checked" : ""), 1)) \ - { \ - return JB_ERR_MEMORY; \ - } \ - if (map(exports, name "-param", 1, \ - (((add & bit) && !mapped_param) ? \ - action->string[index] : default_val), 1)) \ - { \ - return JB_ERR_MEMORY; \ - } - -#define DEFINE_CGI_PARAM_NO_RADIO(name, bit, index, default_val) \ - if (map(exports, name "-param", 1, \ - ((add & bit) ? action->string[index] : default_val), 1)) \ - { \ - return JB_ERR_MEMORY; \ - } - -#define DEFINE_ACTION_MULTI(name, index) \ - if (action->multi_add[index]->first) \ - { \ - current_mode = 'y'; \ - } \ - else if (action->multi_remove_all[index]) \ - { \ - current_mode = 'n'; \ - } \ - else if (action->multi_remove[index]->first) \ - { \ - current_mode = 'y'; \ - } \ - else \ - { \ - current_mode = 'x'; \ - } \ - if (map_radio(exports, name, "ynx", current_mode)) \ - { \ - return JB_ERR_MEMORY; \ - } - -#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */ - -#include "actionlist.h" - -#undef DEFINE_ACTION_MULTI -#undef DEFINE_ACTION_STRING -#undef DEFINE_ACTION_BOOL -#undef DEFINE_ACTION_ALIAS -#undef DEFINE_CGI_PARAM_CUSTOM -#undef DEFINE_CGI_PARAM_RADIO -#undef DEFINE_CGI_PARAM_NO_RADIO - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : actions_from_radio - * - * Description : Converts a map of parameters passed to a CGI function - * into an actionsfile entry. - * - * Parameters : - * 1 : parameters = parameters to the CGI call - * 2 : action = Action to change. Must be valid before - * the call, actions not specified will be - * left unchanged. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * - *********************************************************************/ -static jb_err actions_from_radio(const struct map * parameters, - struct action_spec *action) -{ - const char * param; - char * param_dup; - char ch; - const char * js_name; - jb_err err = JB_ERR_OK; - - assert(parameters); - assert(action); - - /* Statics are generally a potential race condition, - * but in this case we're safe and don't need semaphores. - * Be careful if you modify this function. - * - Jon - * The js_name_arr's are never free()d, but this is no - * problem, since they will only be created once and - * used by all threads thereafter. -oes - */ - -#define JAVASCRIPTIFY(dest_var, string) \ - { \ - static int first_time = 1; \ - static char *js_name_arr; \ - if (first_time) \ - { \ - js_name_arr = strdup(string); \ - javascriptify(js_name_arr); \ - } \ - dest_var = js_name_arr; \ - first_time = 0; \ - } \ - -#define DEFINE_ACTION_BOOL(name, bit) \ - JAVASCRIPTIFY(js_name, name); \ - ch = get_char_param(parameters, js_name); \ - if (ch == 'Y') \ - { \ - action->add |= bit; \ - action->mask |= bit; \ - } \ - else if (ch == 'N') \ - { \ - action->add &= ~bit; \ - action->mask &= ~bit; \ - } \ - else if (ch == 'X') \ - { \ - action->add &= ~bit; \ - action->mask |= bit; \ - } \ - -#define DEFINE_ACTION_STRING(name, bit, index) \ - JAVASCRIPTIFY(js_name, name); \ - ch = get_char_param(parameters, js_name); \ - if (ch == 'Y') \ - { \ - param = NULL; \ - JAVASCRIPTIFY(js_name, name "-mode"); \ - if (!err) err = get_string_param(parameters, js_name, &param); \ - if ((param == NULL) || (0 == strcmp(param, "CUSTOM"))) \ - { \ - JAVASCRIPTIFY(js_name, name "-param"); \ - if (!err) err = get_string_param(parameters, js_name, &param); \ - } \ - if (param != NULL) \ - { \ - if (NULL == (param_dup = strdup(param))) \ - { \ - return JB_ERR_MEMORY; \ - } \ - freez(action->string[index]); \ - action->add |= bit; \ - action->mask |= bit; \ - action->string[index] = param_dup; \ - } \ - } \ - else if (ch == 'N') \ - { \ - if (action->add & bit) \ - { \ - freez(action->string[index]); \ - } \ - action->add &= ~bit; \ - action->mask &= ~bit; \ - } \ - else if (ch == 'X') \ - { \ - if (action->add & bit) \ - { \ - freez(action->string[index]); \ - } \ - action->add &= ~bit; \ - action->mask |= bit; \ - } \ - -#define DEFINE_ACTION_MULTI(name, index) \ - JAVASCRIPTIFY(js_name, name); \ - ch = get_char_param(parameters, js_name); \ - if (ch == 'Y') \ - { \ - /* FIXME */ \ - } \ - else if (ch == 'N') \ - { \ - list_remove_all(action->multi_add[index]); \ - list_remove_all(action->multi_remove[index]); \ - action->multi_remove_all[index] = 1; \ - } \ - else if (ch == 'X') \ - { \ - list_remove_all(action->multi_add[index]); \ - list_remove_all(action->multi_remove[index]); \ - action->multi_remove_all[index] = 0; \ - } \ - -#define DEFINE_ACTION_ALIAS 0 /* No aliases for URL parsing */ - -#include "actionlist.h" - -#undef DEFINE_ACTION_MULTI -#undef DEFINE_ACTION_STRING -#undef DEFINE_ACTION_BOOL -#undef DEFINE_ACTION_ALIAS -#undef JAVASCRIPTIFY - - return err; -} -#endif /* def FEATURE_CGI_EDIT_ACTIONS */ - - -#ifdef FEATURE_TOGGLE -/********************************************************************* - * - * Function : cgi_toggle - * - * Description : CGI function that adds a new empty section to - * an actions file. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * set : If present, how to change toggle setting: - * "enable", "disable", "toggle", or none (default). - * mini : If present, use mini reply template. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * - *********************************************************************/ -jb_err cgi_toggle(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map *exports; - char mode; - const char *template_name; - - assert(csp); - assert(rsp); - assert(parameters); - - if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_TOGGLE)) - { - return cgi_error_disabled(csp, rsp); - } - - mode = get_char_param(parameters, "set"); - - if (mode == 'E') - { - /* Enable */ - global_toggle_state = 1; - } - else if (mode == 'D') - { - /* Disable */ - global_toggle_state = 0; - } - else if (mode == 'T') - { - /* Toggle */ - global_toggle_state = !global_toggle_state; - } - - if (NULL == (exports = default_exports(csp, "toggle"))) - { - return JB_ERR_MEMORY; - } - - template_name = (get_char_param(parameters, "mini") - ? "toggle-mini" - : "toggle"); - - return template_fill_for_cgi(csp, template_name, exports, rsp); -} -#endif /* def FEATURE_TOGGLE */ - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/cgiedit.h b/external/privoxy/cgiedit.h deleted file mode 100644 index ceb5248..0000000 --- a/external/privoxy/cgiedit.h +++ /dev/null @@ -1,175 +0,0 @@ -#ifndef CGIEDIT_H_INCLUDED -#define CGIEDIT_H_INCLUDED -#define CGIEDIT_H_VERSION "$Id: cgiedit.h,v 1.10 2008/08/31 15:59:03 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/cgiedit.h,v $ - * - * Purpose : CGI-based actionsfile editor. - * - * Functions declared include: - * - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: cgiedit.h,v $ - * Revision 1.10 2008/08/31 15:59:03 fabiankeil - * There's no reason to let remote toggling support depend - * on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't. - * - * Revision 1.9 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.7.2.2 2004/02/17 13:30:23 oes - * Moved cgi_error_disabled() from cgiedit.c to - * cgi.c to re-enable build with --disable-editor. - * Fixes Bug #892744. Thanks to Matthew Fischer - * for spotting. - * - * Revision 1.7.2.1 2002/11/28 18:15:17 oes - * Added cgi_error_disabled - * - * Revision 1.7 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.6 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.5 2002/01/22 23:24:48 jongfoster - * Adding edit-actions-section-swap - * - * Revision 1.4 2001/11/13 00:28:51 jongfoster - * Adding new CGIs for use by non-JavaScript browsers: - * edit-actions-url-form - * edit-actions-add-url-form - * edit-actions-remove-url-form - * - * Revision 1.3 2001/10/23 21:48:19 jongfoster - * Cleaning up error handling in CGI functions - they now send back - * a HTML error page and should never cause a FATAL error. (Fixes one - * potential source of "denial of service" attacks). - * - * CGI actions file editor that works and is actually useful. - * - * Ability to toggle JunkBuster remotely using a CGI call. - * - * You can turn off both the above features in the main configuration - * file, e.g. if you are running a multi-user proxy. - * - * Revision 1.2 2001/10/14 22:12:49 jongfoster - * New version of CGI-based actionsfile editor. - * Major changes, including: - * - Completely new file parser and file output routines - * - edit-actions CGI renamed edit-actions-for-url - * - All CGIs now need a filename parameter, except for... - * - New CGI edit-actions which doesn't need a filename, - * to allow you to start the editor up. - * - edit-actions-submit now works, and now automatically - * redirects you back to the main edit-actions-list handler. - * - * Revision 1.1 2001/09/16 15:47:37 jongfoster - * First version of CGI-based edit interface. This is very much a - * work-in-progress, and you can't actually use it to edit anything - * yet. You must #define FEATURE_CGI_EDIT_ACTIONS for these changes - * to have any effect. - * - * - **********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * CGI functions - */ -#ifdef FEATURE_CGI_EDIT_ACTIONS -extern jb_err cgi_edit_actions (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_for_url(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_list (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_submit (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_url (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_url_form(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_add_url(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_add_url_form(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_remove_url (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_remove_url_form(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_section_remove(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_section_add (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_edit_actions_section_swap (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -#endif /* def FEATURE_CGI_EDIT_ACTIONS */ -#ifdef FEATURE_TOGGLE -extern jb_err cgi_toggle(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -#endif /* def FEATURE_TOGGLE */ - -/* Revision control strings from this header and associated .c file */ -extern const char cgiedit_rcs[]; -extern const char cgiedit_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef CGI_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/cgisimple.c b/external/privoxy/cgisimple.c deleted file mode 100644 index 3543611..0000000 --- a/external/privoxy/cgisimple.c +++ /dev/null @@ -1,2295 +0,0 @@ -const char cgisimple_rcs[] = "$Id: cgisimple.c,v 1.91 2009/03/08 14:19:23 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/cgisimple.c,v $ - * - * Purpose : Simple CGIs to get information about Privoxy's - * status. - * - * Functions declared include: - * - * - * Copyright : Written by and Copyright (C) 2001-2008 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: cgisimple.c,v $ - * Revision 1.91 2009/03/08 14:19:23 fabiankeil - * Fix justified (but harmless) compiler warnings - * on platforms where sizeof(int) < sizeof(long). - * - * Revision 1.90 2009/03/01 18:43:09 fabiankeil - * Fix cparser warnings. - * - * Revision 1.89 2008/10/11 11:31:14 fabiankeil - * Add FEATURE_CONNECTION_KEEP_ALIVE to the list - * of conditional defines on the show-status page. - * - * Revision 1.88 2008/08/30 12:03:07 fabiankeil - * Remove FEATURE_COOKIE_JAR. - * - * Revision 1.87 2008/08/29 15:59:22 fabiankeil - * Fix two comments. - * - * Revision 1.86 2008/06/28 14:19:05 fabiankeil - * Protocol detection is done case-insensitive, fix assertion - * to do the same. Yay for Privoxy-Regression-Test and zzuf. - * - * Revision 1.85 2008/05/26 17:30:55 fabiankeil - * Provide an OpenSearch Description to access the - * show-url-info page through "search engine plugins". - * - * Revision 1.84 2008/05/26 16:16:55 fabiankeil - * Spell error correctly. - * - * Revision 1.83 2008/05/12 14:51:30 fabiankeil - * Don't complain about an invalid URL if show-url-info is requested - * without parameters. Regression introduced in 1.81 by yours truly. - * - * Revision 1.82 2008/05/10 20:01:47 fabiankeil - * Fix an assertion that could erroneously - * trigger in case of memory shortage. - * - * Revision 1.81 2008/05/05 09:54:39 fabiankeil - * In cgi_show_url_info(), make sure ftp URLs are - * declared invalid. Also simplify the code that adds - * "http://" if no protocol has been specified. - * - * Revision 1.80 2008/05/04 16:18:32 fabiankeil - * Provide parse_http_url() with a third parameter to specify - * whether or not URLs without protocol are acceptable. - * - * Revision 1.79 2008/05/04 13:30:56 fabiankeil - * Streamline parse_http_url()'s prototype. - * - * Revision 1.78 2008/05/03 16:50:11 fabiankeil - * Leverage content_filters_enabled() in cgi_show_url_info(). - * - * Revision 1.77 2008/05/02 09:47:48 fabiankeil - * In cgi_show_url_info, pass an initialized http structure - * to parse_http_url() as that will be required soonish and - * assert that https URLs are recognized correctly. - * - * Revision 1.76 2008/04/28 09:13:30 fabiankeil - * In load_file(), remember the error reason and fclose() - * and return later on instead of right away. - * - * Revision 1.75 2008/04/27 13:52:52 fabiankeil - * Move CGI file loading code into load_file() and - * add checks for unexpected errors. - * - * Revision 1.74 2008/04/26 15:50:56 fabiankeil - * Fix macro name in cgi_show_file() error path. - * - * Revision 1.73 2008/04/26 12:21:55 fabiankeil - * Forget about JB_ERR_PARSE. JB_ERR_CGI_PARAMS to the rescue. - * - * Revision 1.72 2008/04/26 10:34:15 fabiankeil - * If zlib support is unavailable and there are content filters active - * but the prevent-compression action is disabled, include a warning - * on the show-url-info page that compression might prevent filtering. - * - * Revision 1.71 2008/04/25 13:33:56 fabiankeil - * - Factor cgi_show_file() out of cgi_show_status(). - * - Adjust cgi_show_status()'s parameter description to match reality. - * - * Revision 1.70 2008/04/24 16:12:38 fabiankeil - * In cgi_show_status(), load the requested file at once. - * Using string_join() for every line really doesn't scale. - * - * Revision 1.69 2008/04/17 14:40:48 fabiankeil - * Provide get_http_time() with the buffer size so it doesn't - * have to blindly assume that the buffer is big enough. - * - * Revision 1.68 2008/03/27 18:27:21 fabiankeil - * Remove kill-popups action. - * - * Revision 1.67 2008/03/27 17:00:05 fabiankeil - * Turn the favicon blobs into locals. - * - * Revision 1.66 2008/02/23 16:57:12 fabiankeil - * Rename url_actions() to get_url_actions() and let it - * use the standard parameter ordering. - * - * Revision 1.65 2008/02/23 16:33:43 fabiankeil - * Let forward_url() use the standard parameter ordering - * and mark its second parameter immutable. - * - * Revision 1.64 2008/02/03 13:56:07 fabiankeil - * Add SOCKS5 support for show-url-info CGI page. - * - * Revision 1.63 2008/02/01 06:04:31 fabiankeil - * If edit buttons on the show-url-info CGI page are hidden, explain why. - * - * Revision 1.62 2008/02/01 05:52:40 fabiankeil - * Hide edit buttons on the show-url-info CGI page if enable-edit-action - * is disabled. Patch by Lee with additional white space adjustments. - * - * Revision 1.61 2008/01/26 11:13:25 fabiankeil - * If enable-edit-actions is disabled, hide the edit buttons and explain why. - * - * Revision 1.60 2007/10/27 13:12:13 fabiankeil - * Finish 1.49 and check write access before - * showing edit buttons on show-url-info page. - * - * Revision 1.59 2007/10/19 16:42:36 fabiankeil - * Plug memory leak I introduced five months ago. - * Yay Valgrind and Privoxy-Regression-Test. - * - * Revision 1.58 2007/07/21 12:19:50 fabiankeil - * If show-url-info is called with an URL that Privoxy - * would reject as invalid, don't show unresolved forwarding - * variables, "final matches" or claim the site's secure. - * - * Revision 1.57 2007/06/01 16:53:05 fabiankeil - * Adjust cgi_show_url_info() to show what forward-override{} - * would do with the requested URL (instead of showing how the - * request for the CGI page would be forwarded if it wasn't a - * CGI request). - * - * Revision 1.56 2007/05/21 10:50:35 fabiankeil - * - Use strlcpy() instead of strcpy(). - * - Stop treating actions files special. Expect a complete file name - * (with or without path) like it's done for the rest of the files. - * Closes FR#588084. - * - Don't rerun sed() in cgi_show_request(). - * - * Revision 1.55 2007/04/13 13:36:46 fabiankeil - * Reference action files in CGI URLs by id instead - * of using the first part of the file name. - * Fixes BR 1694250 and BR 1590556. - * - * Revision 1.54 2007/04/09 18:11:35 fabiankeil - * Don't mistake VC++'s _snprintf() for a snprintf() replacement. - * - * Revision 1.53 2007/04/08 13:21:04 fabiankeil - * Reference action files in CGI URLs by id instead - * of using the first part of the file name. - * Fixes BR 1694250 and BR 1590556. - * - * Revision 1.52 2007/02/13 15:10:26 fabiankeil - * Apparently fopen()ing in "binary" mode doesn't require - * #ifdefs, it's already done without them in cgiedit.c. - * - * Revision 1.51 2007/02/10 16:55:22 fabiankeil - * - Show forwarding settings on the show-url-info page - * - Fix some HTML syntax errors. - * - * Revision 1.50 2007/01/23 15:51:17 fabiankeil - * Add favicon delivery functions. - * - * Revision 1.49 2007/01/20 16:29:38 fabiankeil - * Suppress edit buttons for action files if Privoxy has - * no write access. Suggested by Roland in PR 1564026. - * - * Revision 1.48 2007/01/20 15:31:31 fabiankeil - * Display warning if show-url-info CGI page - * is used while Privoxy is toggled off. - * - * Revision 1.47 2007/01/12 15:07:10 fabiankeil - * Use zalloc in cgi_send_user_manual. - * - * Revision 1.46 2007/01/02 12:49:46 fabiankeil - * Add FEATURE_ZLIB to the list of conditional - * defines at the show-status page. - * - * Revision 1.45 2006/12/28 18:16:41 fabiankeil - * Fixed gcc43 compiler warnings, zero out cgi_send_user_manual's - * body memory before using it, replaced sprintf calls with snprintf. - * - * Revision 1.44 2006/12/22 14:19:27 fabiankeil - * Removed checks whether or not AF_FILES have - * data structures associated with them in cgi_show_status. - * It doesn't matter as we're only interested in the file names. - * - * For the action files the checks were always true, - * but they prevented empty filter files from being - * listed. Fixes parts of BR 1619208. - * - * Revision 1.43 2006/12/17 17:57:56 fabiankeil - * - Added FEATURE_GRACEFUL_TERMINATION to the - * "conditional #defines" section - * - Escaped ampersands in generated HTML. - * - Renamed re-filter-filename to re-filter-filenames - * - * Revision 1.42 2006/11/21 15:43:12 fabiankeil - * Add special treatment for WIN32 to make sure - * cgi_send_user_manual opens the files in binary mode. - * Fixes BR 1600411 and unbreaks image delivery. - * - * Remove outdated comment. - * - * Revision 1.41 2006/10/09 19:18:28 roro - * Redirect http://p.p/user-manual (without trailing slash) to - * http://p.p/user-manual/ (with trailing slash), otherwise links will be broken. - * - * Revision 1.40 2006/09/09 13:05:33 fabiankeil - * Modified cgi_send_user_manual to serve binary - * content without destroying it first. Should also be - * faster now. Added ".jpg" check for Content-Type guessing. - * - * Revision 1.39 2006/09/08 09:49:23 fabiankeil - * Deliver documents in the user-manual directory - * with "Content-Type text/css" if their filename - * ends with ".css". - * - * Revision 1.38 2006/09/06 18:45:03 fabiankeil - * Incorporate modified version of Roland Rosenfeld's patch to - * optionally access the user-manual via Privoxy. Closes patch 679075. - * - * Formatting changed to Privoxy style, added call to - * cgi_error_no_template if the requested file doesn't - * exist and modified check whether or not Privoxy itself - * should serve the manual. Should work cross-platform now. - * - * Revision 1.37 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.35.2.7 2006/01/29 23:10:56 david__schmidt - * Multiple filter file support - * - * Revision 1.35.2.6 2005/07/04 03:13:43 david__schmidt - * Undo some damaging memory leak patches - * - * Revision 1.35.2.5 2005/05/07 21:50:55 david__schmidt - * A few memory leaks plugged (mostly on error paths) - * - * Revision 1.35.2.4 2005/04/04 02:21:24 david__schmidt - * Another instance of: - * Don't show "Edit" buttons #ifndef FEATURE_CGI_EDIT_ACTIONS - * Thanks to Magnus Holmgren for the patch - * - * Revision 1.35.2.3 2003/12/17 16:34:15 oes - * - Prevent line wrap beween "View/Edit" link buttons on status page - * - Some (mostly irrelevant) fixes for Out-of-mem-case handling - * - * Revision 1.35.2.2 2003/04/03 13:48:28 oes - * Don't show "Edit" buttons #ifndef FEATURE_CGI_EDIT_ACTIONS - * - * Revision 1.35.2.1 2002/07/04 15:02:38 oes - * Added ability to send redirects to send-banner CGI, so that it can completely mimic the image blocking action if called with type=auto - * - * Revision 1.35.2.1 2002/07/01 17:32:04 morcego - * Applying patch from Andreas as provided by Hal on the list. - * Message-ID: <20020701121218.V1606(a)feenix.burgiss.net> - * - * Revision 1.35 2002/05/12 21:44:44 jongfoster - * Adding amiga.[ch] revision information, if on an amiga. - * - * Revision 1.34 2002/04/30 12:06:12 oes - * Deleted unused code from default_cgi - * - * Revision 1.33 2002/04/30 11:14:52 oes - * Made csp the first parameter in *action_to_html - * - * Revision 1.32 2002/04/26 18:29:13 jongfoster - * Fixing this Visual C++ warning: - * cgisimple.c(775) : warning C4018: '<' : signed/unsigned mismatch - * - * Revision 1.31 2002/04/26 12:54:36 oes - * - Kill obsolete REDIRECT_URL code - * - Error handling fixes - * - Style sheet related HTML snipplet changes - * - cgi_show_url_info: - * - Matches now in table, actions on single lines, - * linked to help - * - standard.action suppressed - * - Buttons to View and Edit AFs - * - * Revision 1.30 2002/04/24 02:18:08 oes - * - show-status is now the starting point for editing - * the actions files, generate list of all AFs with buttons - * for viewing and editing, new look for file list (Jon: - * buttons now aligned ;-P ), view mode now supports multiple - * AFs, name changes, no view links for unspecified files, - * no edit link for standard.action. - * - * - Jon's multiple AF patch: cgi_show_url_info now uses all - * AFs and marks the output accordingly - * - * Revision 1.29 2002/04/10 13:38:35 oes - * load_template signature changed - * - * Revision 1.28 2002/04/07 15:42:12 jongfoster - * Fixing send-banner?type=auto when the image-blocker is - * a redirect to send-banner - * - * Revision 1.27 2002/04/05 15:50:48 oes - * added send-stylesheet CGI - * - * Revision 1.26 2002/04/04 00:36:36 gliptak - * always use pcre for matching - * - * Revision 1.25 2002/04/03 22:28:03 gliptak - * Removed references to gnu_regex - * - * Revision 1.24 2002/04/02 16:12:47 oes - * Fix: moving misplaced lines into #ifdef FEATURE_FORCE - * - * Revision 1.23 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.22 2002/03/24 16:18:15 jongfoster - * Removing old logo - * - * Revision 1.21 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.20 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.19 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.18 2002/03/12 01:44:49 oes - * Changed default for "blocked" image from jb logo to checkboard pattern - * - * Revision 1.17 2002/03/08 16:43:18 oes - * Added choice beween GIF and PNG built-in images - * - * Revision 1.16 2002/03/07 03:48:38 oes - * - Changed built-in images from GIF to PNG - * (with regard to Unisys patent issue) - * - Added a 4x4 pattern PNG which is less intrusive - * than the logo but also clearly marks the deleted banners - * - * Revision 1.15 2002/03/06 22:54:35 jongfoster - * Automated function-comment nitpicking. - * - * Revision 1.14 2002/03/02 04:14:50 david__schmidt - * Clean up a little CRLF unpleasantness that suddenly appeared - * - * Revision 1.13 2002/02/21 00:10:37 jongfoster - * Adding send-banner?type=auto option - * - * Revision 1.12 2002/01/23 01:03:32 jongfoster - * Fixing gcc [CygWin] compiler warnings - * - * Revision 1.11 2002/01/23 00:01:04 jongfoster - * Adding cgi_transparent_gif() for http://i.j.b/t - * Adding missing html_encode() to many CGI functions. - * Adding urlmatch.[ch] to http://i.j.b/show-version - * - * Revision 1.10 2002/01/17 21:10:37 jongfoster - * Changes to cgi_show_url_info to use new matching code from urlmatch.c. - * Also fixing a problem in the same function with improperly quoted URLs - * in output HTML, and adding code to handle https:// URLs correctly. - * - * Revision 1.9 2001/11/30 23:09:15 jongfoster - * Now reports on FEATURE_CGI_EDIT_ACTIONS - * Removing FEATURE_DENY_GZIP from template - * - * Revision 1.8 2001/11/13 00:14:07 jongfoster - * Fixing stupid bug now I've figured out what || means. - * (It always returns 0 or 1, not one of it's paramaters.) - * - * Revision 1.7 2001/10/23 21:48:19 jongfoster - * Cleaning up error handling in CGI functions - they now send back - * a HTML error page and should never cause a FATAL error. (Fixes one - * potential source of "denial of service" attacks). - * - * CGI actions file editor that works and is actually useful. - * - * Ability to toggle JunkBuster remotely using a CGI call. - * - * You can turn off both the above features in the main configuration - * file, e.g. if you are running a multi-user proxy. - * - * Revision 1.6 2001/10/14 22:00:32 jongfoster - * Adding support for a 404 error when an invalid CGI page is requested. - * - * Revision 1.5 2001/10/07 15:30:41 oes - * Removed FEATURE_DENY_GZIP - * - * Revision 1.4 2001/10/02 15:31:12 oes - * Introduced show-request cgi - * - * Revision 1.3 2001/09/22 16:34:44 jongfoster - * Removing unneeded #includes - * - * Revision 1.2 2001/09/19 18:01:11 oes - * Fixed comments; cosmetics - * - * Revision 1.1 2001/09/16 17:08:54 jongfoster - * Moving simple CGI functions from cgi.c to new file cgisimple.c - * - * - **********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <sys/types.h> -#include <stdlib.h> -#include <ctype.h> -#include <string.h> -#include <assert.h> - -#ifdef HAVE_ACCESS -#include <unistd.h> -#endif /* def HAVE_ACCESS */ - -#include "project.h" -#include "cgi.h" -#include "cgisimple.h" -#include "list.h" -#include "encode.h" -#include "jcc.h" -#include "filters.h" -#include "actions.h" -#include "miscutil.h" -#include "loadcfg.h" -#include "parsers.h" -#include "urlmatch.h" -#include "errlog.h" - -const char cgisimple_h_rcs[] = CGISIMPLE_H_VERSION; - -static char *show_rcs(void); -static jb_err show_defines(struct map *exports); -static jb_err cgi_show_file(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -static jb_err load_file(const char *filename, char **buffer, size_t *length); - -/********************************************************************* - * - * Function : cgi_default - * - * Description : CGI function that is called for the CGI_SITE_1_HOST - * and CGI_SITE_2_HOST/CGI_SITE_2_PATH base URLs. - * Boring - only exports the default exports. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * - *********************************************************************/ -jb_err cgi_default(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map *exports; - - (void)parameters; - - assert(csp); - assert(rsp); - - if (NULL == (exports = default_exports(csp, ""))) - { - return JB_ERR_MEMORY; - } - - return template_fill_for_cgi(csp, "default", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_error_404 - * - * Description : CGI function that is called if an unknown action was - * given. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_error_404(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map *exports; - - assert(csp); - assert(rsp); - assert(parameters); - - if (NULL == (exports = default_exports(csp, NULL))) - { - return JB_ERR_MEMORY; - } - - rsp->status = strdup("404 Privoxy configuration page not found"); - if (rsp->status == NULL) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - return template_fill_for_cgi(csp, "cgi-error-404", exports, rsp); -} - - -#ifdef FEATURE_GRACEFUL_TERMINATION -/********************************************************************* - * - * Function : cgi_die - * - * Description : CGI function to shut down Privoxy. - * NOTE: Turning this on in a production build - * would be a BAD idea. An EXTREMELY BAD idea. - * In short, don't do it. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_die (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - assert(csp); - assert(rsp); - assert(parameters); - - /* quit */ - g_terminate = 1; - - /* - * I don't really care what gets sent back to the browser. - * Take the easy option - "out of memory" page. - */ - - return JB_ERR_MEMORY; -} -#endif /* def FEATURE_GRACEFUL_TERMINATION */ - - -/********************************************************************* - * - * Function : cgi_show_request - * - * Description : Show the client's request and what sed() would have - * made of it. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_show_request(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - char *p; - struct map *exports; - - assert(csp); - assert(rsp); - assert(parameters); - - if (NULL == (exports = default_exports(csp, "show-request"))) - { - return JB_ERR_MEMORY; - } - - /* - * Repair the damage done to the IOB by get_header() - */ - for (p = csp->iob->buf; p < csp->iob->eod; p++) - { - if (*p == '\0') *p = '\n'; - } - - /* - * Export the original client's request and the one we would - * be sending to the server if this wasn't a CGI call - */ - - if (map(exports, "client-request", 1, html_encode(csp->iob->buf), 0)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - if (map(exports, "processed-request", 1, - html_encode_and_free_original(list_to_text(csp->headers)), 0)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - return template_fill_for_cgi(csp, "show-request", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_send_banner - * - * Description : CGI function that returns a banner. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * type : Selects the type of banner between "trans", "logo", - * and "auto". Defaults to "logo" if absent or invalid. - * "auto" means to select as if we were image-blocking. - * (Only the first character really counts; b and t are - * equivalent). - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_send_banner(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - char imagetype = lookup(parameters, "type")[0]; - - /* - * If type is auto, then determine the right thing - * to do from the set-image-blocker action - */ - if (imagetype == 'a') - { - /* - * Default to pattern - */ - imagetype = 'p'; - -#ifdef FEATURE_IMAGE_BLOCKING - if ((csp->action->flags & ACTION_IMAGE_BLOCKER) != 0) - { - static const char prefix1[] = CGI_PREFIX "send-banner?type="; - static const char prefix2[] = "http://" CGI_SITE_1_HOST "/send-banner?type="; - const char *p = csp->action->string[ACTION_STRING_IMAGE_BLOCKER]; - - if (p == NULL) - { - /* Use default - nothing to do here. */ - } - else if (0 == strcmpic(p, "blank")) - { - imagetype = 'b'; - } - else if (0 == strcmpic(p, "pattern")) - { - imagetype = 'p'; - } - - /* - * If the action is to call this CGI, determine - * the argument: - */ - else if (0 == strncmpic(p, prefix1, sizeof(prefix1) - 1)) - { - imagetype = p[sizeof(prefix1) - 1]; - } - else if (0 == strncmpic(p, prefix2, sizeof(prefix2) - 1)) - { - imagetype = p[sizeof(prefix2) - 1]; - } - - /* - * Everything else must (should) be a URL to - * redirect to. - */ - else - { - imagetype = 'r'; - } - } -#endif /* def FEATURE_IMAGE_BLOCKING */ - } - - /* - * Now imagetype is either the non-auto type we were called with, - * or it was auto and has since been determined. In any case, we - * can proceed to actually answering the request by sending a redirect - * or an image as appropriate: - */ - if (imagetype == 'r') - { - rsp->status = strdup("302 Local Redirect from Privoxy"); - if (rsp->status == NULL) - { - return JB_ERR_MEMORY; - } - if (enlist_unique_header(rsp->headers, "Location", - csp->action->string[ACTION_STRING_IMAGE_BLOCKER])) - { - return JB_ERR_MEMORY; - } - } - else - { - if ((imagetype == 'b') || (imagetype == 't')) - { - rsp->body = bindup(image_blank_data, image_blank_length); - rsp->content_length = image_blank_length; - } - else - { - rsp->body = bindup(image_pattern_data, image_pattern_length); - rsp->content_length = image_pattern_length; - } - - if (rsp->body == NULL) - { - return JB_ERR_MEMORY; - } - if (enlist(rsp->headers, "Content-Type: " BUILTIN_IMAGE_MIMETYPE)) - { - return JB_ERR_MEMORY; - } - - rsp->is_static = 1; - } - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : cgi_transparent_image - * - * Description : CGI function that sends a 1x1 transparent image. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_transparent_image(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - (void)csp; - (void)parameters; - - rsp->body = bindup(image_blank_data, image_blank_length); - rsp->content_length = image_blank_length; - - if (rsp->body == NULL) - { - return JB_ERR_MEMORY; - } - - if (enlist(rsp->headers, "Content-Type: " BUILTIN_IMAGE_MIMETYPE)) - { - return JB_ERR_MEMORY; - } - - rsp->is_static = 1; - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : cgi_send_default_favicon - * - * Description : CGI function that sends the standard favicon. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_send_default_favicon(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - static const char default_favicon_data[] = - "\000\000\001\000\001\000\020\020\002\000\000\000\000\000\260" - "\000\000\000\026\000\000\000\050\000\000\000\020\000\000\000" - "\040\000\000\000\001\000\001\000\000\000\000\000\100\000\000" - "\000\000\000\000\000\000\000\000\000\002\000\000\000\000\000" - "\000\000\377\377\377\000\377\000\052\000\017\360\000\000\077" - "\374\000\000\161\376\000\000\161\376\000\000\361\377\000\000" - "\361\377\000\000\360\017\000\000\360\007\000\000\361\307\000" - "\000\361\307\000\000\361\307\000\000\360\007\000\000\160\036" - "\000\000\177\376\000\000\077\374\000\000\017\360\000\000\360" - "\017\000\000\300\003\000\000\200\001\000\000\200\001\000\000" - "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" - "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" - "\000\000\200\001\000\000\200\001\000\000\300\003\000\000\360" - "\017\000\000"; - static const size_t favicon_length = sizeof(default_favicon_data) - 1; - - (void)csp; - (void)parameters; - - rsp->body = bindup(default_favicon_data, favicon_length); - rsp->content_length = favicon_length; - - if (rsp->body == NULL) - { - return JB_ERR_MEMORY; - } - - if (enlist(rsp->headers, "Content-Type: image/x-icon")) - { - return JB_ERR_MEMORY; - } - - rsp->is_static = 1; - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : cgi_send_error_favicon - * - * Description : CGI function that sends the favicon for error pages. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_send_error_favicon(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - static const char error_favicon_data[] = - "\000\000\001\000\001\000\020\020\002\000\000\000\000\000\260" - "\000\000\000\026\000\000\000\050\000\000\000\020\000\000\000" - "\040\000\000\000\001\000\001\000\000\000\000\000\100\000\000" - "\000\000\000\000\000\000\000\000\000\002\000\000\000\000\000" - "\000\000\377\377\377\000\000\000\377\000\017\360\000\000\077" - "\374\000\000\161\376\000\000\161\376\000\000\361\377\000\000" - "\361\377\000\000\360\017\000\000\360\007\000\000\361\307\000" - "\000\361\307\000\000\361\307\000\000\360\007\000\000\160\036" - "\000\000\177\376\000\000\077\374\000\000\017\360\000\000\360" - "\017\000\000\300\003\000\000\200\001\000\000\200\001\000\000" - "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" - "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" - "\000\000\200\001\000\000\200\001\000\000\300\003\000\000\360" - "\017\000\000"; - static const size_t favicon_length = sizeof(error_favicon_data) - 1; - - (void)csp; - (void)parameters; - - rsp->body = bindup(error_favicon_data, favicon_length); - rsp->content_length = favicon_length; - - if (rsp->body == NULL) - { - return JB_ERR_MEMORY; - } - - if (enlist(rsp->headers, "Content-Type: image/x-icon")) - { - return JB_ERR_MEMORY; - } - - rsp->is_static = 1; - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : cgi_send_stylesheet - * - * Description : CGI function that sends a css stylesheet found - * in the cgi-style.css template - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_send_stylesheet(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - jb_err err; - - assert(csp); - assert(rsp); - - (void)parameters; - - err = template_load(csp, &rsp->body, "cgi-style.css", 0); - - if (err == JB_ERR_FILE) - { - /* - * No way to tell user; send empty stylesheet - */ - log_error(LOG_LEVEL_ERROR, "Could not find cgi-style.css template"); - } - else if (err) - { - return err; /* JB_ERR_MEMORY */ - } - - if (enlist(rsp->headers, "Content-Type: text/css")) - { - return JB_ERR_MEMORY; - } - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : cgi_send_url_info_osd - * - * Description : CGI function that sends the OpenSearch Description - * template for the show-url-info page. It allows to - * access the page through "search engine plugins". - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_send_url_info_osd(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - jb_err err = JB_ERR_MEMORY; - struct map *exports = default_exports(csp, NULL); - - (void)csp; - (void)parameters; - - if (NULL != exports) - { - err = template_fill_for_cgi(csp, "url-info-osd.xml", exports, rsp); - if (JB_ERR_OK == err) - { - err = enlist(rsp->headers, - "Content-Type: application/opensearchdescription+xml"); - } - } - - return err; - -} - - -/********************************************************************* - * - * Function : cgi_send_user_manual - * - * Description : CGI function that sends a file in the user - * manual directory. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : file=name.html, the name of the HTML file - * (relative to user-manual from config) - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_send_user_manual(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - const char * filename; - char *full_path; - jb_err err = JB_ERR_OK; - size_t length; - - assert(csp); - assert(rsp); - assert(parameters); - - if (!parameters->first) - { - /* requested http://p.p/user-manual (without trailing slash) */ - return cgi_redirect(rsp, CGI_PREFIX "user-manual/"); - } - - get_string_param(parameters, "file", &filename); - /* Check paramter for hack attempts */ - if (filename && strchr(filename, '/')) - { - return JB_ERR_CGI_PARAMS; - } - if (filename && strstr(filename, "..")) - { - return JB_ERR_CGI_PARAMS; - } - - full_path = make_path(csp->config->usermanual, filename ? filename : "index.html"); - if (full_path == NULL) - { - return JB_ERR_MEMORY; - } - - err = load_file(full_path, &rsp->body, &rsp->content_length); - if (JB_ERR_OK != err) - { - assert((JB_ERR_FILE == err) || (JB_ERR_MEMORY == err)); - if (JB_ERR_FILE == err) - { - err = cgi_error_no_template(csp, rsp, full_path); - } - freez(full_path); - return err; - } - freez(full_path); - - /* Guess correct Content-Type based on the filename's ending */ - if (filename) - { - length = strlen(filename); - } - else - { - length = 0; - } - if((length>=4) && !strcmp(&filename[length-4], ".css")) - { - err = enlist(rsp->headers, "Content-Type: text/css"); - } - else if((length>=4) && !strcmp(&filename[length-4], ".jpg")) - { - err = enlist(rsp->headers, "Content-Type: image/jpeg"); - } - else - { - err = enlist(rsp->headers, "Content-Type: text/html"); - } - - return err; -} - - -/********************************************************************* - * - * Function : cgi_show_version - * - * Description : CGI function that returns a a web page describing the - * file versions of Privoxy. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : none - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_show_version(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - struct map *exports; - - assert(csp); - assert(rsp); - assert(parameters); - - if (NULL == (exports = default_exports(csp, "show-version"))) - { - return JB_ERR_MEMORY; - } - - if (map(exports, "sourceversions", 1, show_rcs(), 0)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - return template_fill_for_cgi(csp, "show-version", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_show_status - * - * Description : CGI function that returns a web page describing the - * current status of Privoxy. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * file : Which file to show. Only first letter is checked, - * valid values are: - * - "a"ction file - * - "r"egex - * - "t"rust - * Default is to show menu and other information. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_show_status(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - char *s = NULL; - unsigned i; - int j; - - char buf[BUFFER_SIZE]; -#ifdef FEATURE_STATISTICS - float perc_rej; /* Percentage of http requests rejected */ - int local_urls_read; - int local_urls_rejected; -#endif /* ndef FEATURE_STATISTICS */ - jb_err err = JB_ERR_OK; - - struct map *exports; - - assert(csp); - assert(rsp); - assert(parameters); - - if ('\0' != *(lookup(parameters, "file"))) - { - return cgi_show_file(csp, rsp, parameters); - } - - if (NULL == (exports = default_exports(csp, "show-status"))) - { - return JB_ERR_MEMORY; - } - - s = strdup(""); - for (j = 0; (s != NULL) && (j < Argc); j++) - { - if (!err) err = string_join (&s, html_encode(Argv[j])); - if (!err) err = string_append(&s, " "); - } - if (!err) err = map(exports, "invocation", 1, s, 0); - - if (!err) err = map(exports, "options", 1, csp->config->proxy_args, 1); - if (!err) err = show_defines(exports); - - if (err) - { - free_map(exports); - return JB_ERR_MEMORY; - } - -#ifdef FEATURE_STATISTICS - local_urls_read = urls_read; - local_urls_rejected = urls_rejected; - - /* - * Need to alter the stats not to include the fetch of this - * page. - * - * Can't do following thread safely! doh! - * - * urls_read--; - * urls_rejected--; * This will be incremented subsequently * - */ - - if (local_urls_read == 0) - { - if (!err) err = map_block_killer(exports, "have-stats"); - } - else - { - if (!err) err = map_block_killer(exports, "have-no-stats"); - - perc_rej = (float)local_urls_rejected * 100.0F / - (float)local_urls_read; - - snprintf(buf, sizeof(buf), "%d", local_urls_read); - if (!err) err = map(exports, "requests-received", 1, buf, 1); - - snprintf(buf, sizeof(buf), "%d", local_urls_rejected); - if (!err) err = map(exports, "requests-blocked", 1, buf, 1); - - snprintf(buf, sizeof(buf), "%6.2f", perc_rej); - if (!err) err = map(exports, "percent-blocked", 1, buf, 1); - } - -#else /* ndef FEATURE_STATISTICS */ - err = err || map_block_killer(exports, "statistics"); -#endif /* ndef FEATURE_STATISTICS */ - - /* - * List all action files in use, together with view and edit links, - * except for standard.action, which should only be viewable. (Not - * enforced in the editor itself) - * FIXME: Shouldn't include hardwired HTML here, use line template instead! - */ - s = strdup(""); - for (i = 0; i < MAX_AF_FILES; i++) - { - if (csp->actions_list[i] != NULL) - { - if (!err) err = string_append(&s, "<tr><td>"); - if (!err) err = string_join(&s, html_encode(csp->actions_list[i]->filename)); - snprintf(buf, sizeof(buf), - "</td><td class=\"buttons\"><a href=\"/show-status?file=actions&index=%u\">View</a>", i); - if (!err) err = string_append(&s, buf); - -#ifdef FEATURE_CGI_EDIT_ACTIONS - if ((csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS) - && (NULL == strstr(csp->actions_list[i]->filename, "standard.action")) - && (NULL != csp->config->actions_file_short[i])) - { -#ifdef HAVE_ACCESS - if (access(csp->config->actions_file[i], W_OK) == 0) - { -#endif /* def HAVE_ACCESS */ - snprintf(buf, sizeof(buf), "  <a href=\"/edit-actions-list?f=%u\">Edit</a>", i); - if (!err) err = string_append(&s, buf); -#ifdef HAVE_ACCESS - } - else - { - if (!err) err = string_append(&s, "  <strong>No write access.</strong>"); - } -#endif /* def HAVE_ACCESS */ - } -#endif - - if (!err) err = string_append(&s, "</td></tr>\n"); - } - } - if (*s != '\0') - { - if (!err) err = map(exports, "actions-filenames", 1, s, 0); - } - else - { - if (!err) err = map(exports, "actions-filenames", 1, "<tr><td>None specified</td></tr>", 1); - } - - /* - * List all re_filterfiles in use, together with view options. - * FIXME: Shouldn't include hardwired HTML here, use line template instead! - */ - s = strdup(""); - for (i = 0; i < MAX_AF_FILES; i++) - { - if (csp->rlist[i] != NULL) - { - if (!err) err = string_append(&s, "<tr><td>"); - if (!err) err = string_join(&s, html_encode(csp->rlist[i]->filename)); - snprintf(buf, sizeof(buf), - "</td><td class=\"buttons\"><a href=\"/show-status?file=filter&index=%u\">View</a>", i); - if (!err) err = string_append(&s, buf); - if (!err) err = string_append(&s, "</td></tr>\n"); - } - } - if (*s != '\0') - { - if (!err) err = map(exports, "re-filter-filenames", 1, s, 0); - } - else - { - if (!err) err = map(exports, "re-filter-filenames", 1, "<tr><td>None specified</td></tr>", 1); - if (!err) err = map_block_killer(exports, "have-filterfile"); - } - -#ifdef FEATURE_TRUST - if (csp->tlist) - { - if (!err) err = map(exports, "trust-filename", 1, html_encode(csp->tlist->filename), 0); - } - else - { - if (!err) err = map(exports, "trust-filename", 1, "None specified", 1); - if (!err) err = map_block_killer(exports, "have-trustfile"); - } -#else - if (!err) err = map_block_killer(exports, "trust-support"); -#endif /* ndef FEATURE_TRUST */ - -#ifdef FEATURE_CGI_EDIT_ACTIONS - if (!err && (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - err = map_block_killer(exports, "cgi-editor-is-disabled"); - } -#endif /* ndef CGI_EDIT_ACTIONS */ - - if (err) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - return template_fill_for_cgi(csp, "show-status", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_show_url_info - * - * Description : CGI function that determines and shows which actions - * Privoxy will perform for a given url, and which - * matches starting from the defaults have lead to that. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * url : The url whose actions are to be determined. - * If url is unset, the url-given conditional will be - * set, so that all but the form can be suppressed in - * the template. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_show_url_info(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - char *url_param; - struct map *exports; - char buf[150]; - - assert(csp); - assert(rsp); - assert(parameters); - - if (NULL == (exports = default_exports(csp, "show-url-info"))) - { - return JB_ERR_MEMORY; - } - - /* - * Get the url= parameter (if present) and remove any leading/trailing spaces. - */ - url_param = strdup(lookup(parameters, "url")); - if (url_param == NULL) - { - free_map(exports); - return JB_ERR_MEMORY; - } - chomp(url_param); - - /* - * Handle prefixes. 4 possibilities: - * 1) "http://" or "https://" prefix present and followed by URL - OK - * 2) Only the "http://" or "https://" part is present, no URL - change - * to empty string so it will be detected later as "no URL". - * 3) Parameter specified but doesn't contain "http(s?)://" - add a - * "http://" prefix. - * 4) Parameter not specified or is empty string - let this fall through - * for now, next block of code will handle it. - */ - if (0 == strncmp(url_param, "http://", 7)) - { - if (url_param[7] == '\0') - { - /* - * Empty URL (just prefix). - * Make it totally empty so it's caught by the next if() - */ - url_param[0] = '\0'; - } - } - else if (0 == strncmp(url_param, "https://", 8)) - { - if (url_param[8] == '\0') - { - /* - * Empty URL (just prefix). - * Make it totally empty so it's caught by the next if() - */ - url_param[0] = '\0'; - } - } - else if ((url_param[0] != '\0') && (NULL == strstr(url_param, "://"))) - { - /* No prefix - assume http:// */ - char *url_param_prefixed = strdup("http://"); - - if (JB_ERR_OK != string_join(&url_param_prefixed, url_param)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - url_param = url_param_prefixed; - } - - /* - * Hide "toggle off" warning if Privoxy is toggled on. - */ - if ( -#ifdef FEATURE_TOGGLE - (global_toggle_state == 1) && -#endif /* def FEATURE_TOGGLE */ - map_block_killer(exports, "privoxy-is-toggled-off") - ) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - if (url_param[0] == '\0') - { - /* URL paramater not specified, display query form only. */ - free(url_param); - if (map_block_killer(exports, "url-given") - || map(exports, "url", 1, "", 1)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - } - else - { - /* Given a URL, so query it. */ - jb_err err; - char *matches; - char *s; - int hits = 0; - struct file_list *fl; - struct url_actions *b; - struct http_request url_to_query[1]; - struct current_action_spec action[1]; - int i; - - if (map(exports, "url", 1, html_encode(url_param), 0)) - { - free(url_param); - free_map(exports); - return JB_ERR_MEMORY; - } - - init_current_action(action); - - if (map(exports, "default", 1, current_action_to_html(csp, action), 0)) - { - free_current_action(action); - free(url_param); - free_map(exports); - return JB_ERR_MEMORY; - } - - memset(url_to_query, '\0', sizeof(url_to_query)); - err = parse_http_url(url_param, url_to_query, REQUIRE_PROTOCOL); - assert((err != JB_ERR_OK) || (url_to_query->ssl == !strncmpic(url_param, "https://", 8))); - - free(url_param); - - if (err == JB_ERR_MEMORY) - { - free_http_request(url_to_query); - free_current_action(action); - free_map(exports); - return JB_ERR_MEMORY; - } - else if (err) - { - /* Invalid URL */ - - err = map(exports, "matches", 1, "<b>[Invalid URL specified!]</b>" , 1); - if (!err) err = map(exports, "final", 1, lookup(exports, "default"), 1); - if (!err) err = map_block_killer(exports, "valid-url"); - - free_current_action(action); - free_http_request(url_to_query); - - if (err) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - return template_fill_for_cgi(csp, "show-url-info", exports, rsp); - } - - /* - * We have a warning about SSL paths. Hide it for unencrypted sites. - */ - if (!url_to_query->ssl) - { - if (map_block_killer(exports, "https")) - { - free_current_action(action); - free_map(exports); - free_http_request(url_to_query); - return JB_ERR_MEMORY; - } - } - - matches = strdup("<table summary=\"\" class=\"transparent\">"); - - for (i = 0; i < MAX_AF_FILES; i++) - { - if (NULL == csp->config->actions_file_short[i] - || !strcmp(csp->config->actions_file_short[i], "standard.action")) continue; - - b = NULL; - hits = 1; - if ((fl = csp->actions_list[i]) != NULL) - { - if ((b = fl->f) != NULL) - { - /* FIXME: Hardcoded HTML! */ - string_append(&matches, "<tr><th>In file: "); - string_join (&matches, html_encode(csp->config->actions_file_short[i])); - snprintf(buf, sizeof(buf), " <a class=\"cmd\" href=\"/show-status?file=actions&index=%d\">", i); - string_append(&matches, buf); - string_append(&matches, "View</a>"); -#ifdef FEATURE_CGI_EDIT_ACTIONS - if (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS) - { -#ifdef HAVE_ACCESS - if (access(csp->config->actions_file[i], W_OK) == 0) - { -#endif /* def HAVE_ACCESS */ - snprintf(buf, sizeof(buf), - " <a class=\"cmd\" href=\"/edit-actions-list?f=%d\">", i); - string_append(&matches, buf); - string_append(&matches, "Edit</a>"); -#ifdef HAVE_ACCESS - } - else - { - string_append(&matches, " <strong>No write access.</strong>"); - } -#endif /* def HAVE_ACCESS */ - } -#endif /* FEATURE_CGI_EDIT_ACTIONS */ - - string_append(&matches, "</th></tr>\n"); - - hits = 0; - b = b->next; - } - } - - for (; (b != NULL) && (matches != NULL); b = b->next) - { - if (url_match(b->url, url_to_query)) - { - string_append(&matches, "<tr><td>{"); - string_join (&matches, actions_to_html(csp, b->action)); - string_append(&matches, " }<br>\n<code>"); - string_join (&matches, html_encode(b->url->spec)); - string_append(&matches, "</code></td></tr>\n"); - - if (merge_current_action(action, b->action)) - { - freez(matches); - free_http_request(url_to_query); - free_current_action(action); - free_map(exports); - return JB_ERR_MEMORY; - } - hits++; - } - } - - if (!hits) - { - string_append(&matches, "<tr><td>(no matches in this file)</td></tr>\n"); - } - } - string_append(&matches, "</table>\n"); - - /* - * XXX: Kludge to make sure the "Forward settings" section - * shows what forward-override{} would do with the requested URL. - * No one really cares how the CGI request would be forwarded - * if it wasn't intercepted as CGI request in the first place. - * - * From here on the action bitmask will no longer reflect - * the real url (http://config.privoxy.org/show-url-info?url=.*) - * but luckily it's no longer required later on anyway. - */ - free_current_action(csp->action); - get_url_actions(csp, url_to_query); - - /* - * Fill in forwarding settings. - * - * The possibilities are: - * - no forwarding - * - http forwarding only - * - socks4(a) forwarding only - * - socks4(a) and http forwarding. - * - * XXX: Parts of this code could be reused for the - * "forwarding-failed" template which currently doesn't - * display the proxy port and an eventual second forwarder. - */ - { - const struct forward_spec *fwd = forward_url(csp, url_to_query); - - if ((fwd->gateway_host == NULL) && (fwd->forward_host == NULL)) - { - if (!err) err = map_block_killer(exports, "socks-forwarder"); - if (!err) err = map_block_killer(exports, "http-forwarder"); - } - else - { - char port[10]; /* We save proxy ports as int but need a string here */ - - if (!err) err = map_block_killer(exports, "no-forwarder"); - - if (fwd->gateway_host != NULL) - { - char *socks_type = NULL; - - switch (fwd->type) - { - case SOCKS_4: - socks_type = "socks4"; - break; - case SOCKS_4A: - socks_type = "socks4a"; - break; - case SOCKS_5: - socks_type = "socks5"; - break; - default: - log_error(LOG_LEVEL_FATAL, "Unknown socks type: %d.", fwd->type); - } - - if (!err) err = map(exports, "socks-type", 1, socks_type, 1); - if (!err) err = map(exports, "gateway-host", 1, fwd->gateway_host, 1); - snprintf(port, sizeof(port), "%d", fwd->gateway_port); - if (!err) err = map(exports, "gateway-port", 1, port, 1); - } - else - { - if (!err) err = map_block_killer(exports, "socks-forwarder"); - } - - if (fwd->forward_host != NULL) - { - if (!err) err = map(exports, "forward-host", 1, fwd->forward_host, 1); - snprintf(port, sizeof(port), "%d", fwd->forward_port); - if (!err) err = map(exports, "forward-port", 1, port, 1); - } - else - { - if (!err) err = map_block_killer(exports, "http-forwarder"); - } - } - } - - free_http_request(url_to_query); - - if (err || matches == NULL) - { - free_current_action(action); - free_map(exports); - return JB_ERR_MEMORY; - } - -#ifdef FEATURE_CGI_EDIT_ACTIONS - if ((csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)) - { - err = map_block_killer(exports, "cgi-editor-is-disabled"); - } -#endif /* FEATURE_CGI_EDIT_ACTIONS */ - - /* - * If zlib support is available, if no content filters - * are enabled or if the prevent-compression action is enabled, - * suppress the "compression could prevent filtering" warning. - */ -#ifndef FEATURE_ZLIB - if (!content_filters_enabled(action) || - (action->flags & ACTION_NO_COMPRESSION)) -#endif - { - if (!err) err = map_block_killer(exports, "filters-might-be-ineffective"); - } - - if (err || map(exports, "matches", 1, matches , 0)) - { - free_current_action(action); - free_map(exports); - return JB_ERR_MEMORY; - } - - s = current_action_to_html(csp, action); - - free_current_action(action); - - if (map(exports, "final", 1, s, 0)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - } - - return template_fill_for_cgi(csp, "show-url-info", exports, rsp); -} - - -/********************************************************************* - * - * Function : cgi_robots_txt - * - * Description : CGI function to return "/robots.txt". - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : None - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err cgi_robots_txt(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - char buf[100]; - jb_err err; - - (void)csp; - (void)parameters; - - rsp->body = strdup( - "# This is the Privoxy control interface.\n" - "# It isn't very useful to index it, and you're likely to break stuff.\n" - "# So go away!\n" - "\n" - "User-agent: *\n" - "Disallow: /\n" - "\n"); - if (rsp->body == NULL) - { - return JB_ERR_MEMORY; - } - - err = enlist_unique(rsp->headers, "Content-Type: text/plain", 13); - - rsp->is_static = 1; - - get_http_time(7 * 24 * 60 * 60, buf, sizeof(buf)); /* 7 days into future */ - if (!err) err = enlist_unique_header(rsp->headers, "Expires", buf); - - return (err ? JB_ERR_MEMORY : JB_ERR_OK); -} - - -/********************************************************************* - * - * Function : show_defines - * - * Description : Add to a map the state od all conditional #defines - * used when building - * - * Parameters : - * 1 : exports = map to extend - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err show_defines(struct map *exports) -{ - jb_err err = JB_ERR_OK; - -#ifdef FEATURE_ACL - if (!err) err = map_conditional(exports, "FEATURE_ACL", 1); -#else /* ifndef FEATURE_ACL */ - if (!err) err = map_conditional(exports, "FEATURE_ACL", 0); -#endif /* ndef FEATURE_ACL */ - -#ifdef FEATURE_CGI_EDIT_ACTIONS - if (!err) err = map_conditional(exports, "FEATURE_CGI_EDIT_ACTIONS", 1); -#else /* ifndef FEATURE_CGI_EDIT_ACTIONS */ - if (!err) err = map_conditional(exports, "FEATURE_CGI_EDIT_ACTIONS", 0); -#endif /* ndef FEATURE_CGI_EDIT_ACTIONS */ - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - if (!err) err = map_conditional(exports, "FEATURE_CONNECTION_KEEP_ALIVE", 1); -#else /* ifndef FEATURE_CGI_EDIT_ACTIONS */ - if (!err) err = map_conditional(exports, "FEATURE_CONNECTION_KEEP_ALIVE", 0); -#endif /* ndef FEATURE_CONNECTION_KEEP_ALIVE */ - -#ifdef FEATURE_FAST_REDIRECTS - if (!err) err = map_conditional(exports, "FEATURE_FAST_REDIRECTS", 1); -#else /* ifndef FEATURE_FAST_REDIRECTS */ - if (!err) err = map_conditional(exports, "FEATURE_FAST_REDIRECTS", 0); -#endif /* ndef FEATURE_FAST_REDIRECTS */ - -#ifdef FEATURE_FORCE_LOAD - if (!err) err = map_conditional(exports, "FEATURE_FORCE_LOAD", 1); - if (!err) err = map(exports, "FORCE_PREFIX", 1, FORCE_PREFIX, 1); -#else /* ifndef FEATURE_FORCE_LOAD */ - if (!err) err = map_conditional(exports, "FEATURE_FORCE_LOAD", 0); - if (!err) err = map(exports, "FORCE_PREFIX", 1, "(none - disabled)", 1); -#endif /* ndef FEATURE_FORCE_LOAD */ - -#ifdef FEATURE_GRACEFUL_TERMINATION - if (!err) err = map_conditional(exports, "FEATURE_GRACEFUL_TERMINATION", 1); -#else /* ifndef FEATURE_GRACEFUL_TERMINATION */ - if (!err) err = map_conditional(exports, "FEATURE_GRACEFUL_TERMINATION", 0); -#endif /* ndef FEATURE_GRACEFUL_TERMINATION */ - -#ifdef FEATURE_IMAGE_BLOCKING - if (!err) err = map_conditional(exports, "FEATURE_IMAGE_BLOCKING", 1); -#else /* ifndef FEATURE_IMAGE_BLOCKING */ - if (!err) err = map_conditional(exports, "FEATURE_IMAGE_BLOCKING", 0); -#endif /* ndef FEATURE_IMAGE_BLOCKING */ - -#ifdef FEATURE_IMAGE_DETECT_MSIE - if (!err) err = map_conditional(exports, "FEATURE_IMAGE_DETECT_MSIE", 1); -#else /* ifndef FEATURE_IMAGE_DETECT_MSIE */ - if (!err) err = map_conditional(exports, "FEATURE_IMAGE_DETECT_MSIE", 0); -#endif /* ndef FEATURE_IMAGE_DETECT_MSIE */ - -#ifdef FEATURE_NO_GIFS - if (!err) err = map_conditional(exports, "FEATURE_NO_GIFS", 1); -#else /* ifndef FEATURE_NO_GIFS */ - if (!err) err = map_conditional(exports, "FEATURE_NO_GIFS", 0); -#endif /* ndef FEATURE_NO_GIFS */ - -#ifdef FEATURE_PTHREAD - if (!err) err = map_conditional(exports, "FEATURE_PTHREAD", 1); -#else /* ifndef FEATURE_PTHREAD */ - if (!err) err = map_conditional(exports, "FEATURE_PTHREAD", 0); -#endif /* ndef FEATURE_PTHREAD */ - -#ifdef FEATURE_STATISTICS - if (!err) err = map_conditional(exports, "FEATURE_STATISTICS", 1); -#else /* ifndef FEATURE_STATISTICS */ - if (!err) err = map_conditional(exports, "FEATURE_STATISTICS", 0); -#endif /* ndef FEATURE_STATISTICS */ - -#ifdef FEATURE_TOGGLE - if (!err) err = map_conditional(exports, "FEATURE_TOGGLE", 1); -#else /* ifndef FEATURE_TOGGLE */ - if (!err) err = map_conditional(exports, "FEATURE_TOGGLE", 0); -#endif /* ndef FEATURE_TOGGLE */ - -#ifdef FEATURE_TRUST - if (!err) err = map_conditional(exports, "FEATURE_TRUST", 1); -#else /* ifndef FEATURE_TRUST */ - if (!err) err = map_conditional(exports, "FEATURE_TRUST", 0); -#endif /* ndef FEATURE_TRUST */ - -#ifdef FEATURE_ZLIB - if (!err) err = map_conditional(exports, "FEATURE_ZLIB", 1); -#else /* ifndef FEATURE_ZLIB */ - if (!err) err = map_conditional(exports, "FEATURE_ZLIB", 0); -#endif /* ndef FEATURE_ZLIB */ - -#ifdef STATIC_PCRE - if (!err) err = map_conditional(exports, "STATIC_PCRE", 1); -#else /* ifndef STATIC_PCRE */ - if (!err) err = map_conditional(exports, "STATIC_PCRE", 0); -#endif /* ndef STATIC_PCRE */ - -#ifdef STATIC_PCRS - if (!err) err = map_conditional(exports, "STATIC_PCRS", 1); -#else /* ifndef STATIC_PCRS */ - if (!err) err = map_conditional(exports, "STATIC_PCRS", 0); -#endif /* ndef STATIC_PCRS */ - - return err; -} - - -/********************************************************************* - * - * Function : show_rcs - * - * Description : Create a string with the rcs info for all sourcefiles - * - * Parameters : None - * - * Returns : A string, or NULL on out-of-memory. - * - *********************************************************************/ -static char *show_rcs(void) -{ - char *result = strdup(""); - char buf[BUFFER_SIZE]; - - /* Instead of including *all* dot h's in the project (thus creating a - * tremendous amount of dependencies), I will concede to declaring them - * as extern's. This forces the developer to add to this list, but oh well. - */ - -#define SHOW_RCS(__x) \ - { \ - extern const char __x[]; \ - snprintf(buf, sizeof(buf), " %s\n", __x); \ - string_append(&result, buf); \ - } - - /* In alphabetical order */ - SHOW_RCS(actions_h_rcs) - SHOW_RCS(actions_rcs) -#ifdef AMIGA - SHOW_RCS(amiga_h_rcs) - SHOW_RCS(amiga_rcs) -#endif /* def AMIGA */ - SHOW_RCS(cgi_h_rcs) - SHOW_RCS(cgi_rcs) -#ifdef FEATURE_CGI_EDIT_ACTIONS - SHOW_RCS(cgiedit_h_rcs) - SHOW_RCS(cgiedit_rcs) -#endif /* def FEATURE_CGI_EDIT_ACTIONS */ - SHOW_RCS(cgisimple_h_rcs) - SHOW_RCS(cgisimple_rcs) -#ifdef __MINGW32__ - SHOW_RCS(cygwin_h_rcs) -#endif - SHOW_RCS(deanimate_h_rcs) - SHOW_RCS(deanimate_rcs) - SHOW_RCS(encode_h_rcs) - SHOW_RCS(encode_rcs) - SHOW_RCS(errlog_h_rcs) - SHOW_RCS(errlog_rcs) - SHOW_RCS(filters_h_rcs) - SHOW_RCS(filters_rcs) - SHOW_RCS(gateway_h_rcs) - SHOW_RCS(gateway_rcs) - SHOW_RCS(jbsockets_h_rcs) - SHOW_RCS(jbsockets_rcs) - SHOW_RCS(jcc_h_rcs) - SHOW_RCS(jcc_rcs) - SHOW_RCS(list_h_rcs) - SHOW_RCS(list_rcs) - SHOW_RCS(loadcfg_h_rcs) - SHOW_RCS(loadcfg_rcs) - SHOW_RCS(loaders_h_rcs) - SHOW_RCS(loaders_rcs) - SHOW_RCS(miscutil_h_rcs) - SHOW_RCS(miscutil_rcs) - SHOW_RCS(parsers_h_rcs) - SHOW_RCS(parsers_rcs) - SHOW_RCS(pcrs_rcs) - SHOW_RCS(pcrs_h_rcs) - SHOW_RCS(project_h_rcs) - SHOW_RCS(ssplit_h_rcs) - SHOW_RCS(ssplit_rcs) - SHOW_RCS(urlmatch_h_rcs) - SHOW_RCS(urlmatch_rcs) -#ifdef _WIN32 -#ifndef _WIN_CONSOLE - SHOW_RCS(w32log_h_rcs) - SHOW_RCS(w32log_rcs) - SHOW_RCS(w32res_h_rcs) - SHOW_RCS(w32taskbar_h_rcs) - SHOW_RCS(w32taskbar_rcs) -#endif /* ndef _WIN_CONSOLE */ - SHOW_RCS(win32_h_rcs) - SHOW_RCS(win32_rcs) -#endif /* def _WIN32 */ - -#undef SHOW_RCS - - return result; - -} - - -/********************************************************************* - * - * Function : cgi_show_file - * - * Description : CGI function that shows the content of a - * configuration file. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : rsp = http_response data structure for output - * 3 : parameters = map of cgi parameters - * - * CGI Parameters : - * file : Which file to show. Only first letter is checked, - * valid values are: - * - "a"ction file - * - "r"egex - * - "t"rust - * Default is to show menu and other information. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err cgi_show_file(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters) -{ - unsigned i; - const char * filename = NULL; - char * file_description = NULL; - - assert(csp); - assert(rsp); - assert(parameters); - - switch (*(lookup(parameters, "file"))) - { - case 'a': - if (!get_number_param(csp, parameters, "index", &i) && i < MAX_AF_FILES && csp->actions_list[i]) - { - filename = csp->actions_list[i]->filename; - file_description = "Actions File"; - } - break; - - case 'f': - if (!get_number_param(csp, parameters, "index", &i) && i < MAX_AF_FILES && csp->rlist[i]) - { - filename = csp->rlist[i]->filename; - file_description = "Filter File"; - } - break; - -#ifdef FEATURE_TRUST - case 't': - if (csp->tlist) - { - filename = csp->tlist->filename; - file_description = "Trust File"; - } - break; -#endif /* def FEATURE_TRUST */ - } - - if (NULL != filename) - { - struct map *exports; - char *s; - jb_err err; - size_t length; - - exports = default_exports(csp, "show-status"); - if (NULL == exports) - { - return JB_ERR_MEMORY; - } - - if ( map(exports, "file-description", 1, file_description, 1) - || map(exports, "filepath", 1, html_encode(filename), 0) ) - { - free_map(exports); - return JB_ERR_MEMORY; - } - - err = load_file(filename, &s, &length); - if (JB_ERR_OK != err) - { - if (map(exports, "contents", 1, "<h1>ERROR OPENING FILE!</h1>", 1)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - } - else - { - s = html_encode_and_free_original(s); - if (NULL == s) - { - return JB_ERR_MEMORY; - } - - if (map(exports, "contents", 1, s, 0)) - { - free_map(exports); - return JB_ERR_MEMORY; - } - } - - return template_fill_for_cgi(csp, "show-status-file", exports, rsp); - } - - return JB_ERR_CGI_PARAMS; -} - - -/********************************************************************* - * - * Function : load_file - * - * Description : Loads a file into a buffer. - * - * Parameters : - * 1 : filename = Name of the file to be loaded. - * 2 : buffer = Used to return the file's content. - * 3 : length = Used to return the size of the file. - * - * Returns : JB_ERR_OK in case of success, - * JB_ERR_FILE in case of ordinary file loading errors - * (fseek() and ftell() errors are fatal) - * JB_ERR_MEMORY in case of out-of-memory. - * - *********************************************************************/ -static jb_err load_file(const char *filename, char **buffer, size_t *length) -{ - FILE *fp; - long ret; - jb_err err = JB_ERR_OK; - - fp = fopen(filename, "rb"); - if (NULL == fp) - { - return JB_ERR_FILE; - } - - /* Get file length */ - if (fseek(fp, 0, SEEK_END)) - { - log_error(LOG_LEVEL_FATAL, - "Unexpected error while fseek()ing to the end of %s: %E", - filename); - } - ret = ftell(fp); - if (-1 == ret) - { - log_error(LOG_LEVEL_FATAL, - "Unexpected ftell() error while loading %s: %E", - filename); - } - *length = (size_t)ret; - - /* Go back to the beginning. */ - if (fseek(fp, 0, SEEK_SET)) - { - log_error(LOG_LEVEL_FATAL, - "Unexpected error while fseek()ing to the beginning of %s: %E", - filename); - } - - *buffer = (char *)zalloc(*length + 1); - if (NULL == *buffer) - { - err = JB_ERR_MEMORY; - } - else if (!fread(*buffer, *length, 1, fp)) - { - /* - * May happen if the file size changes between fseek() and - * fread(). If it does, we just log it and serve what we got. - */ - log_error(LOG_LEVEL_ERROR, - "Couldn't completely read file %s.", filename); - err = JB_ERR_FILE; - } - - fclose(fp); - - return err; - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/cgisimple.h b/external/privoxy/cgisimple.h deleted file mode 100644 index 2bce214..0000000 --- a/external/privoxy/cgisimple.h +++ /dev/null @@ -1,185 +0,0 @@ -#ifndef CGISIMPLE_H_INCLUDED -#define CGISIMPLE_H_INCLUDED -#define CGISIMPLE_H_VERSION "$Id: cgisimple.h,v 1.16 2008/05/26 17:30:55 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/cgisimple.h,v $ - * - * Purpose : Declares functions to intercept request, generate - * html or gif answers, and to compose HTTP resonses. - * - * Functions declared include: - * - * - * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: cgisimple.h,v $ - * Revision 1.16 2008/05/26 17:30:55 fabiankeil - * Provide an OpenSearch Description to access the - * show-url-info page through "search engine plugins". - * - * Revision 1.15 2007/01/23 15:51:17 fabiankeil - * Add favicon delivery functions. - * - * Revision 1.14 2006/09/06 18:45:03 fabiankeil - * Incorporate modified version of Roland Rosenfeld's patch to - * optionally access the user-manual via Privoxy. Closes patch 679075. - * - * Formatting changed to Privoxy style, added call to - * cgi_error_no_template if the requested file doesn't - * exist and modified check whether or not Privoxy itself - * should serve the manual. Should work cross-platform now. - * - * Revision 1.13 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.11 2002/04/05 15:50:53 oes - * added send-stylesheet CGI - * - * Revision 1.10 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.9 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.8 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.7 2002/03/08 16:43:59 oes - * Renamed cgi_transparent_png to cgi_transparent_image - * - * Revision 1.6 2002/03/07 03:48:59 oes - * - Changed built-in images from GIF to PNG - * (with regard to Unisys patent issue) - * - * Revision 1.5 2002/01/22 23:26:03 jongfoster - * Adding cgi_transparent_gif() for http://i.j.b/t - * - * Revision 1.4 2001/10/23 21:48:19 jongfoster - * Cleaning up error handling in CGI functions - they now send back - * a HTML error page and should never cause a FATAL error. (Fixes one - * potential source of "denial of service" attacks). - * - * CGI actions file editor that works and is actually useful. - * - * Ability to toggle JunkBuster remotely using a CGI call. - * - * You can turn off both the above features in the main configuration - * file, e.g. if you are running a multi-user proxy. - * - * Revision 1.3 2001/10/14 22:00:32 jongfoster - * Adding support for a 404 error when an invalid CGI page is requested. - * - * Revision 1.2 2001/10/02 15:31:20 oes - * Introduced show-request cgi - * - * Revision 1.1 2001/09/16 17:08:54 jongfoster - * Moving simple CGI functions from cgi.c to new file cgisimple.c - * - * - **********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * CGI functions - */ -extern jb_err cgi_default (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_error_404 (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_robots_txt (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_send_banner (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_show_status (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_show_url_info(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_show_version (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_show_request (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_transparent_image (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_send_error_favicon (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_send_default_favicon (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_send_stylesheet(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_send_url_info_osd(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -extern jb_err cgi_send_user_manual(struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); - - -#ifdef FEATURE_GRACEFUL_TERMINATION -extern jb_err cgi_die (struct client_state *csp, - struct http_response *rsp, - const struct map *parameters); -#endif - -/* Revision control strings from this header and associated .c file */ -extern const char cgisimple_rcs[]; -extern const char cgisimple_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef CGISIMPLE_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/config b/external/privoxy/config deleted file mode 100644 index 741382a..0000000 --- a/external/privoxy/config +++ /dev/null @@ -1,1530 +0,0 @@ -# Sample Configuration File for Privoxy v3.0.12 -# -# $Id: config,v 1.76 2009/03/21 11:51:51 fabiankeil Exp $ -# -# Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/ -# -#################################################################### -# # -# Table of Contents # -# # -# I. INTRODUCTION # -# II. FORMAT OF THE CONFIGURATION FILE # -# # -# 1. LOCAL SET-UP DOCUMENTATION # -# 2. CONFIGURATION AND LOG FILE LOCATIONS # -# 3. DEBUGGING # -# 4. ACCESS CONTROL AND SECURITY # -# 5. FORWARDING # -# 6. WINDOWS GUI OPTIONS # -# # -#################################################################### -# -# -# I. INTRODUCTION -# =============== -# -# This file holds Privoxy's main configuration. Privoxy detects -# configuration changes automatically, so you don't have to restart -# it unless you want to load a different configuration file. -# -# The configuration will be reloaded with the first request after -# the change was done, this request itself will still use the old -# configuration, though. In other words: it takes two requests before -# you see the result of your changes. Requests that are dropped due -# to ACL don't trigger reloads. -# -# When starting Privoxy on Unix systems, give the location of this -# file as last argument. On Windows systems, Privoxy will look for -# this file with the name 'config.txt' in the current working directory -# of the Privoxy process. -# -# -# II. FORMAT OF THE CONFIGURATION FILE -# ==================================== -# -# Configuration lines consist of an initial keyword followed by a -# list of values, all separated by whitespace (any number of spaces -# or tabs). For example, -# -# actionsfile default.action -# -# Indicates that the actionsfile is named 'default.action'. -# -# The '#' indicates a comment. Any part of a line following a '#' -# is ignored, except if the '#' is preceded by a '\'. -# -# Thus, by placing a # at the start of an existing configuration -# line, you can make it a comment and it will be treated as if it -# weren't there. This is called "commenting out" an option and can -# be useful. Removing the # again is called "uncommenting". -# -# Note that commenting out an option and leaving it at its default -# are two completely different things! Most options behave very -# differently when unset. See the "Effect if unset" explanation in -# each option's description for details. -# -# Long lines can be continued on the next line by using a `\' as the -# last character. -# -# -# -# 1. LOCAL SET-UP DOCUMENTATION -# ============================== -# -# If you intend to operate Privoxy for more users than just yourself, -# it might be a good idea to let them know how to reach you, what -# you block and why you do that, your policies, etc. -# -# -# -# 1.1. user-manual -# ================= -# -# Specifies: -# -# Location of the Privoxy User Manual. -# -# Type of value: -# -# A fully qualified URI -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# http://www.privoxy.org/version/user-manual/ will be used, -# where version is the Privoxy version. -# -# Notes: -# -# The User Manual URI is the single best source of information on -# Privoxy, and is used for help links from some of the internal -# CGI pages. The manual itself is normally packaged with the -# binary distributions, so you probably want to set this to a -# locally installed copy. -# -# Examples: -# -# The best all purpose solution is simply to put the full local -# PATH to where the User Manual is located: -# -# user-manual /usr/share/doc/privoxy/user-manual -# -# -# The User Manual is then available to anyone with -# access to Privoxy, by following the built-in URL: -# http://config.privoxy.org/user-manual/ (or the shortcut: -# http://p.p/user-manual/) -# -# If the documentation is not on the local system, it can be -# accessed from a remote server, as: -# -# user-manual http://example.com/privoxy/user-manual/ -# -# -# WARNING!!! -# -# If set, this option should be the first option in the config -# file, because it is used while the config file is being read. -# -#user-manual http://www.privoxy.org/user-manual/ -# -# -# 1.2. trust-info-url -# ==================== -# -# Specifies: -# -# A URL to be displayed in the error page that users will see if -# access to an untrusted page is denied. -# -# Type of value: -# -# URL -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# No links are displayed on the "untrusted" error page. -# -# Notes: -# -# The value of this option only matters if the experimental trust -# mechanism has been activated. (See trustfile below.) -# -# If you use the trust mechanism, it is a good idea to write -# up some on-line documentation about your trust policy and to -# specify the URL(s) here. Use multiple times for multiple URLs. -# -# The URL(s) should be added to the trustfile as well, so users -# don't end up locked out from the information on why they were -# locked out in the first place! -# -#trust-info-url http://www.example.com/why_we_block.html -#trust-info-url http://www.example.com/what_we_allow.html -# -# -# 1.3. admin-address -# =================== -# -# Specifies: -# -# An email address to reach the Privoxy administrator. -# -# Type of value: -# -# Email address -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# No email address is displayed on error pages and the CGI user -# interface. -# -# Notes: -# -# If both admin-address and proxy-info-url are unset, the whole -# "Local Privoxy Support" box on all generated pages will not -# be shown. -# -#admin-address privoxy-admin(a)example.com -# -# -# 1.4. proxy-info-url -# ==================== -# -# Specifies: -# -# A URL to documentation about the local Privoxy setup, -# configuration or policies. -# -# Type of value: -# -# URL -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# No link to local documentation is displayed on error pages and -# the CGI user interface. -# -# Notes: -# -# If both admin-address and proxy-info-url are unset, the whole -# "Local Privoxy Support" box on all generated pages will not -# be shown. -# -# This URL shouldn't be blocked ;-) -# -#proxy-info-url http://www.example.com/proxy-service.html -# -# -# 2. CONFIGURATION AND LOG FILE LOCATIONS -# ======================================== -# -# Privoxy can (and normally does) use a number of other files for -# additional configuration, help and logging. This section of the -# configuration file tells Privoxy where to find those other files. -# -# The user running Privoxy, must have read permission for all -# configuration files, and write permission to any files that would -# be modified, such as log files and actions files. -# -# -# -# 2.1. confdir -# ============= -# -# Specifies: -# -# The directory where the other configuration files are located. -# -# Type of value: -# -# Path name -# -# Default value: -# -# /etc/privoxy (Unix) or Privoxy installation dir (Windows) -# -# Effect if unset: -# -# Mandatory -# -# Notes: -# -# No trailing "/", please. -# -confdir . -# -# -# 2.2. templdir -# ============== -# -# Specifies: -# -# An alternative directory where the templates are loaded from. -# -# Type of value: -# -# Path name -# -# Default value: -# -# unset -# -# Effect if unset: -# -# The templates are assumed to be located in confdir/template. -# -# Notes: -# -# Privoxy's original templates are usually overwritten with each -# update. Use this option to relocate customized templates that -# should be kept. As template variables might change between -# updates, you shouldn't expect templates to work with Privoxy -# releases other than the one they were part of, though. -# -#templdir . -# -# -# 2.3. logdir -# ============ -# -# Specifies: -# -# The directory where all logging takes place (i.e. where the -# logfile is located). -# -# Type of value: -# -# Path name -# -# Default value: -# -# /var/log/privoxy (Unix) or Privoxy installation dir (Windows) -# -# Effect if unset: -# -# Mandatory -# -# Notes: -# -# No trailing "/", please. -# -logdir . -# -# -# 2.4. actionsfile -# ================= -# -# Specifies: -# -# The actions file(s) to use -# -# Type of value: -# -# Complete file name, relative to confdir -# -# Default values: -# -# match-all.action # Actions that are applied to all sites and maybe overruled later on. -# -# default.action # Main actions file -# -# user.action # User customizations -# -# Effect if unset: -# -# No actions are taken at all. More or less neutral proxying. -# -# Notes: -# -# Multiple actionsfile lines are permitted, and are in fact -# recommended! -# -# The default values are default.action, which is the "main" -# actions file maintained by the developers, and user.action, -# where you can make your personal additions. -# -# Actions files contain all the per site and per URL configuration -# for ad blocking, cookie management, privacy considerations, -# etc. There is no point in using Privoxy without at least one -# actions file. -# -# Note that since Privoxy 3.0.7, the complete filename, including -# the ".action" extension has to be specified. The syntax change -# was necessary to be consistent with the other file options and -# to allow previously forbidden characters. -# -actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on. -actionsfile default.action # Main actions file -actionsfile user.action # User customizations -# -# -# 2.5. filterfile -# ================ -# -# Specifies: -# -# The filter file(s) to use -# -# Type of value: -# -# File name, relative to confdir -# -# Default value: -# -# default.filter (Unix) or default.filter.txt (Windows) -# -# Effect if unset: -# -# No textual content filtering takes place, i.e. all +filter{name} -# actions in the actions files are turned neutral. -# -# Notes: -# -# Multiple filterfile lines are permitted. -# -# The filter files contain content modification rules that use -# regular expressions. These rules permit powerful changes on the -# content of Web pages, and optionally the headers as well, e.g., -# you could try to disable your favorite JavaScript annoyances, -# re-write the actual displayed text, or just have some fun -# playing buzzword bingo with web pages. -# -# The +filter{name} actions rely on the relevant filter (name) -# to be defined in a filter file! -# -# A pre-defined filter file called default.filter that contains a -# number of useful filters for common problems is included in the -# distribution. See the section on the filter action for a list. -# -# It is recommended to place any locally adapted filters into a -# separate file, such as user.filter. -# -filterfile default.filter -#filterfile user.filter # User customizations -# -# -# 2.6. logfile -# ============= -# -# Specifies: -# -# The log file to use -# -# Type of value: -# -# File name, relative to logdir -# -# Default value: -# -# Unset (commented out). When activated: logfile (Unix) or -# privoxy.log (Windows). -# -# Effect if unset: -# -# No logfile is written. -# -# Notes: -# -# The logfile is where all logging and error messages are -# written. The level of detail and number of messages are set with -# the debug option (see below). The logfile can be useful for -# tracking down a problem with Privoxy (e.g., it's not blocking -# an ad you think it should block) and it can help you to monitor -# what your browser is doing. -# -# Depending on the debug options below, the logfile may be a -# privacy risk if third parties can get access to it. As most -# users will never look at it, Privoxy 3.0.7 and later only log -# fatal errors by default. -# -# For most troubleshooting purposes, you will have to change that, -# please refer to the debugging section for details. -# -# Your logfile will grow indefinitely, and you will probably -# want to periodically remove it. On Unix systems, you can do -# this with a cron job (see "man cron"). For Red Hat based Linux -# distributions, a logrotate script has been included. -# -# Any log files must be writable by whatever user Privoxy is -# being run as (on Unix, default user id is "privoxy"). -# -logfile logfile -# -# -# 2.7. trustfile -# =============== -# -# Specifies: -# -# The name of the trust file to use -# -# Type of value: -# -# File name, relative to confdir -# -# Default value: -# -# Unset (commented out). When activated: trust (Unix) or trust.txt -# (Windows) -# -# Effect if unset: -# -# The entire trust mechanism is disabled. -# -# Notes: -# -# The trust mechanism is an experimental feature for building -# white-lists and should be used with care. It is NOT recommended -# for the casual user. -# -# If you specify a trust file, Privoxy will only allow access to -# sites that are specified in the trustfile. Sites can be listed -# in one of two ways: -# -# Prepending a ~ character limits access to this site only (and -# any sub-paths within this site), e.g. ~www.example.com allows -# access to ~www.example.com/ features/news.html, etc. -# -# Or, you can designate sites as trusted referrers, by prepending -# the name with a + character. The effect is that access to -# untrusted sites will be granted -- but only if a link from -# this trusted referrer was used to get there. The link target -# will then be added to the "trustfile" so that future, direct -# accesses will be granted. Sites added via this mechanism do -# not become trusted referrers themselves (i.e. they are added -# with a ~ designation). There is a limit of 512 such entries, -# after which new entries will not be made. -# -# If you use the + operator in the trust file, it may grow -# considerably over time. -# -# It is recommended that Privoxy be compiled with the -# --disable-force, --disable-toggle and --disable-editor options, -# if this feature is to be used. -# -# Possible applications include limiting Internet access for -# children. -# -#trustfile trust -# -# -# 3. DEBUGGING -# ============= -# -# These options are mainly useful when tracing a problem. Note that -# you might also want to invoke Privoxy with the --no-daemon command -# line option when debugging. -# -# -# -# 3.1. debug -# =========== -# -# Specifies: -# -# Key values that determine what information gets logged. -# -# Type of value: -# -# Integer values -# -# Default value: -# -# 0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged) -# -# Effect if unset: -# -# Default value is used (see above). -# -# Notes: -# -# The available debug levels are: -# -# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024. -# debug 2 # show each connection status -# debug 4 # show I/O status -# debug 8 # show header parsing -# debug 16 # log all data written to the network into the logfile -# debug 32 # debug force feature -# debug 64 # debug regular expression filters -# debug 128 # debug redirects -# debug 256 # debug GIF de-animation -# debug 512 # Common Log Format -# debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why. -# debug 2048 # CGI user interface -# debug 4096 # Startup banner and warnings. -# debug 8192 # Non-fatal errors -# -# -# To select multiple debug levels, you can either add them or -# use multiple debug lines. -# -# A debug level of 1 is informative because it will show you each -# request as it happens. 1, 4096 and 8192 are recommended so that -# you will notice when things go wrong. The other levels are -# probably only of interest if you are hunting down a specific -# problem. They can produce a hell of an output (especially 16). -# -# Privoxy used to ship with the debug levels recommended above -# enabled by default, but due to privacy concerns 3.0.7 and later -# are configured to only log fatal errors. -# -# If you are used to the more verbose settings, simply enable -# the debug lines below again. -# -# If you want to use pure CLF (Common Log Format), you should set -# "debug 512" ONLY and not enable anything else. -# -# Privoxy has a hard-coded limit for the length of log messages. If -# it's reached, messages are logged truncated and marked with -# "... [too long, truncated]". -# -# Please don't file any support requests without trying to -# reproduce the problem with increased debug level first. Once -# you read the log messages, you may even be able to solve the -# problem on your own. -# -#debug 1 # Log the destination for each request Privoxy let through. -#debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why. -#debug 4096 # Startup banner and warnings -#debug 8192 # Non-fatal errors -# -# -# 3.2. single-threaded -# ===================== -# -# Specifies: -# -# Whether to run only one server thread. -# -# Type of value: -# -# None -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Multi-threaded (or, where unavailable: forked) operation, -# i.e. the ability to serve multiple requests simultaneously. -# -# Notes: -# -# This option is only there for debugging purposes. It will -# drastically reduce performance. -# -#single-threaded -# -# -# 3.3. hostname -# ============== -# -# Specifies: -# -# The hostname shown on the CGI pages. -# -# Type of value: -# -# Text -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# The hostname provided by the operating system is used. -# -# Notes: -# -# On some misconfigured systems resolving the hostname fails or -# takes too much time and slows Privoxy down. Setting a fixed -# hostname works around the problem. -# -# In other circumstances it might be desirable to show a hostname -# other than the one returned by the operating system. For example -# if the system has several different hostnames and you don't -# want to use the first one. -# -# Note that Privoxy does not validate the specified hostname value. -# -#hostname hostname.example.org -# -# -# 4. ACCESS CONTROL AND SECURITY -# =============================== -# -# This section of the config file controls the security-relevant -# aspects of Privoxy's configuration. -# -# -# -# 4.1. listen-address -# ==================== -# -# Specifies: -# -# The IP address and TCP port on which Privoxy will listen for -# client requests. -# -# Type of value: -# -# [IP-Address]:Port -# -# Default value: -# -# 127.0.0.1:8118 -# -# Effect if unset: -# -# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and -# recommended for home users who run Privoxy on the same machine -# as their browser. -# -# Notes: -# -# You will need to configure your browser(s) to this proxy address -# and port. -# -# If you already have another service running on port 8118, or -# if you want to serve requests from other machines (e.g. on your -# local network) as well, you will need to override the default. -# -# If you leave out the IP address, Privoxy will bind to all -# interfaces (addresses) on your machine and may become reachable -# from the Internet. In that case, consider using access control -# lists (ACL's, see below), and/or a firewall. -# -# If you open Privoxy to untrusted users, you will also -# want to make sure that the following actions are disabled: -# enable-edit-actions and enable-remote-toggle -# -# Example: -# -# Suppose you are running Privoxy on a machine which has the -# address 192.168.0.1 on your local private network (192.168.0.0) -# and has another outside connection with a different address. You -# want it to serve requests from inside only: -# -# listen-address 192.168.0.1:8118 -# -# -listen-address 127.0.0.1:8118 -# -# -# 4.2. toggle -# ============ -# -# Specifies: -# -# Initial state of "toggle" status -# -# Type of value: -# -# 1 or 0 -# -# Default value: -# -# 1 -# -# Effect if unset: -# -# Act as if toggled on -# -# Notes: -# -# If set to 0, Privoxy will start in "toggled off" mode, -# i.e. mostly behave like a normal, content-neutral proxy -# with both ad blocking and content filtering disabled. See -# enable-remote-toggle below. -# -# The windows version will only display the toggle icon in the -# system tray if this option is present. -# -toggle 1 -# -# -# 4.3. enable-remote-toggle -# ========================== -# -# Specifies: -# -# Whether or not the web-based toggle feature may be used -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# The web-based toggle feature is disabled. -# -# Notes: -# -# When toggled off, Privoxy mostly acts like a normal, -# content-neutral proxy, i.e. doesn't block ads or filter content. -# -# Access to the toggle feature can not be controlled separately by -# "ACLs" or HTTP authentication, so that everybody who can access -# Privoxy (see "ACLs" and listen-address above) can toggle it -# for all users. So this option is not recommended for multi-user -# environments with untrusted users. -# -# Note that malicious client side code (e.g Java) is also capable -# of using this option. -# -# As a lot of Privoxy users don't read documentation, this feature -# is disabled by default. -# -# Note that you must have compiled Privoxy with support for this -# feature, otherwise this option has no effect. -# -enable-remote-toggle 0 -# -# -# 4.4. enable-remote-http-toggle -# =============================== -# -# Specifies: -# -# Whether or not Privoxy recognizes special HTTP headers to change -# its behaviour. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Privoxy ignores special HTTP headers. -# -# Notes: -# -# When toggled on, the client can change Privoxy's behaviour by -# setting special HTTP headers. Currently the only supported -# special header is "X-Filter: No", to disable filtering for -# the ongoing request, even if it is enabled in one of the -# action files. -# -# This feature is disabled by default. If you are using Privoxy in -# a environment with trusted clients, you may enable this feature -# at your discretion. Note that malicious client side code (e.g -# Java) is also capable of using this feature. -# -# This option will be removed in future releases as it has been -# obsoleted by the more general header taggers. -# -enable-remote-http-toggle 0 -# -# -# 4.5. enable-edit-actions -# ========================= -# -# Specifies: -# -# Whether or not the web-based actions file editor may be used -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# The web-based actions file editor is disabled. -# -# Notes: -# -# Access to the editor can not be controlled separately by -# "ACLs" or HTTP authentication, so that everybody who can access -# Privoxy (see "ACLs" and listen-address above) can modify its -# configuration for all users. -# -# This option is not recommended for environments with untrusted -# users and as a lot of Privoxy users don't read documentation, -# this feature is disabled by default. -# -# Note that malicious client side code (e.g Java) is also capable -# of using the actions editor and you shouldn't enable this -# options unless you understand the consequences and are sure -# your browser is configured correctly. -# -# Note that you must have compiled Privoxy with support for this -# feature, otherwise this option has no effect. -# -enable-edit-actions 0 -# -# -# 4.6. enforce-blocks -# ==================== -# -# Specifies: -# -# Whether the user is allowed to ignore blocks and can "go there -# anyway". -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Blocks are not enforced. -# -# Notes: -# -# Privoxy is mainly used to block and filter requests as a service -# to the user, for example to block ads and other junk that clogs -# the pipes. Privoxy's configuration isn't perfect and sometimes -# innocent pages are blocked. In this situation it makes sense to -# allow the user to enforce the request and have Privoxy ignore -# the block. -# -# In the default configuration Privoxy's "Blocked" page contains -# a "go there anyway" link to adds a special string (the force -# prefix) to the request URL. If that link is used, Privoxy -# will detect the force prefix, remove it again and let the -# request pass. -# -# Of course Privoxy can also be used to enforce a network -# policy. In that case the user obviously should not be able to -# bypass any blocks, and that's what the "enforce-blocks" option -# is for. If it's enabled, Privoxy hides the "go there anyway" -# link. If the user adds the force prefix by hand, it will not -# be accepted and the circumvention attempt is logged. -# -# Examples: -# -# enforce-blocks 1 -# -enforce-blocks 0 -# -# -# 4.7. ACLs: permit-access and deny-access -# ========================================= -# -# Specifies: -# -# Who can access what. -# -# Type of value: -# -# src_addr[/src_masklen] [dst_addr[/dst_masklen]] -# -# Where src_addr and dst_addr are IP addresses in dotted decimal -# notation or valid DNS names, and src_masklen and dst_masklen are -# subnet masks in CIDR notation, i.e. integer values from 2 to 30 -# representing the length (in bits) of the network address. The -# masks and the whole destination part are optional. -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Don't restrict access further than implied by listen-address -# -# Notes: -# -# Access controls are included at the request of ISPs and systems -# administrators, and are not usually needed by individual -# users. For a typical home user, it will normally suffice to -# ensure that Privoxy only listens on the localhost (127.0.0.1) -# or internal (home) network address by means of the listen-address -# option. -# -# Please see the warnings in the FAQ that Privoxy is not intended -# to be a substitute for a firewall or to encourage anyone to -# defer addressing basic security weaknesses. -# -# Multiple ACL lines are OK. If any ACLs are specified, Privoxy -# only talks to IP addresses that match at least one permit-access -# line and don't match any subsequent deny-access line. In other -# words, the last match wins, with the default being deny-access. -# -# If Privoxy is using a forwarder (see forward below) for a -# particular destination URL, the dst_addr that is examined is -# the address of the forwarder and NOT the address of the ultimate -# target. This is necessary because it may be impossible for the -# local Privoxy to determine the IP address of the ultimate target -# (that's often what gateways are used for). -# -# You should prefer using IP addresses over DNS names, because -# the address lookups take time. All DNS names must resolve! You -# can not use domain patterns like "*.org" or partial domain -# names. If a DNS name resolves to multiple IP addresses, only -# the first one is used. -# -# Denying access to particular sites by ACL may have undesired -# side effects if the site in question is hosted on a machine -# which also hosts other sites (most sites are). -# -# Examples: -# -# Explicitly define the default behavior if no ACL and -# listen-address are set: "localhost" is OK. The absence of a -# dst_addr implies that all destination addresses are OK: -# -# permit-access localhost -# -# -# Allow any host on the same class C subnet as www.privoxy.org -# access to nothing but www.example.com (or other domains hosted -# on the same system): -# -# permit-access www.privoxy.org/24 www.example.com/32 -# -# -# Allow access from any host on the 26-bit subnet 192.168.45.64 to -# anywhere, with the exception that 192.168.45.73 may not access -# the IP address behind www.dirty-stuff.example.com: -# -# permit-access 192.168.45.64/26 -# deny-access 192.168.45.73 www.dirty-stuff.example.com -# -# -# -# 4.8. buffer-limit -# ================== -# -# Specifies: -# -# Maximum size of the buffer for content filtering. -# -# Type of value: -# -# Size in Kbytes -# -# Default value: -# -# 4096 -# -# Effect if unset: -# -# Use a 4MB (4096 KB) limit. -# -# Notes: -# -# For content filtering, i.e. the +filter and +deanimate-gif -# actions, it is necessary that Privoxy buffers the entire document -# body. This can be potentially dangerous, since a server could -# just keep sending data indefinitely and wait for your RAM to -# exhaust -- with nasty consequences. Hence this option. -# -# When a document buffer size reaches the buffer-limit, it is -# flushed to the client unfiltered and no further attempt to filter -# the rest of the document is made. Remember that there may be -# multiple threads running, which might require up to buffer-limit -# Kbytes each, unless you have enabled "single-threaded" above. -# -buffer-limit 4096 -# -# -# 5. FORWARDING -# ============== -# -# This feature allows routing of HTTP requests through a chain of -# multiple proxies. -# -# Forwarding can be used to chain Privoxy with a caching proxy to -# speed up browsing. Using a parent proxy may also be necessary if -# the machine that Privoxy runs on has no direct Internet access. -# -# Note that parent proxies can severely decrease your privacy -# level. For example a parent proxy could add your IP address to the -# request headers and if it's a caching proxy it may add the "Etag" -# header to revalidation requests again, even though you configured -# Privoxy to remove it. It may also ignore Privoxy's header time -# randomization and use the original values which could be used by -# the server as cookie replacement to track your steps between visits. -# -# Also specified here are SOCKS proxies. Privoxy supports the SOCKS -# 4 and SOCKS 4A protocols. -# -# -# -# 5.1. forward -# ============= -# -# Specifies: -# -# To which parent HTTP proxy specific requests should be routed. -# -# Type of value: -# -# target_pattern http_parent[:port] -# -# where target_pattern is a URL pattern that specifies to which -# requests (i.e. URLs) this forward rule shall apply. Use / -# to denote "all URLs". http_parent[:port] is the DNS name or -# IP address of the parent HTTP proxy through which the requests -# should be forwarded, optionally followed by its listening port -# (default: 8080). Use a single dot (.) to denote "no forwarding". -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Don't use parent HTTP proxies. -# -# Notes: -# -# If http_parent is ".", then requests are not forwarded to -# another HTTP proxy but are made directly to the web servers. -# -# Multiple lines are OK, they are checked in sequence, and the -# last match wins. -# -# Examples: -# -# Everything goes to an example parent proxy, except SSL on port -# 443 (which it doesn't handle): -# -# forward / parent-proxy.example.org:8080 -# forward :443 . -# -# -# Everything goes to our example ISP's caching proxy, except for -# requests to that ISP's sites: -# -# forward / caching-proxy.isp.example.net:8000 -# forward .isp.example.net . -# -# -# -# -# 5.2. forward-socks4, forward-socks4a and forward-socks5 -# ======================================================== -# -# Specifies: -# -# Through which SOCKS proxy (and optionally to which parent HTTP -# proxy) specific requests should be routed. -# -# Type of value: -# -# target_pattern socks_proxy[:port] http_parent[:port] -# -# where target_pattern is a URL pattern that specifies to which -# requests (i.e. URLs) this forward rule shall apply. Use / to -# denote "all URLs". http_parent and socks_proxy are IP addresses -# in dotted decimal notation or valid DNS names (http_parent may -# be "." to denote "no HTTP forwarding"), and the optional port -# parameters are TCP ports, i.e. integer values from 1 to 65535 -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Don't use SOCKS proxies. -# -# Notes: -# -# Multiple lines are OK, they are checked in sequence, and the -# last match wins. -# -# The difference between forward-socks4 and forward-socks4a -# is that in the SOCKS 4A protocol, the DNS resolution of the -# target hostname happens on the SOCKS server, while in SOCKS 4 -# it happens locally. -# -# With forward-socks5 the DNS resolution will happen on the remote -# server as well. -# -# If http_parent is ".", then requests are not forwarded to another -# HTTP proxy but are made (HTTP-wise) directly to the web servers, -# albeit through a SOCKS proxy. -# -# Examples: -# -# From the company example.com, direct connections are made to all -# "internal" domains, but everything outbound goes through their -# ISP's proxy by way of example.com's corporate SOCKS 4A gateway -# to the Internet. -# -# forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 -# forward .example.com . -# -# -# A rule that uses a SOCKS 4 gateway for all destinations but no -# HTTP parent looks like this: -# -# forward-socks4 / socks-gw.example.com:1080 . -# -# -# To chain Privoxy and Tor, both running on the same system, -# you would use something like: -# -# forward-socks4a / 127.0.0.1:9050 . -# -# -# The public Tor network can't be used to reach your local network, -# if you need to access local servers you therefore might want -# to make some exceptions: -# -# forward 192.168.*.*/ . -# forward 10.*.*.*/ . -# forward 127.*.*.*/ . -# -# -# Unencrypted connections to systems in these address ranges will -# be as (un) secure as the local network is, but the alternative -# is that you can't reach the local network through Privoxy at -# all. Of course this may actually be desired and there is no -# reason to make these exceptions if you aren't sure you need them. -# -# If you also want to be able to reach servers in your local -# network by using their names, you will need additional exceptions -# that look like this: -# -# forward localhost/ . -# -# -# -# -# 5.3. forwarded-connect-retries -# =============================== -# -# Specifies: -# -# How often Privoxy retries if a forwarded connection request -# fails. -# -# Type of value: -# -# Number of retries. -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Connections forwarded through other proxies are treated like -# direct connections and no retry attempts are made. -# -# Notes: -# -# forwarded-connect-retries is mainly interesting for socks4a -# connections, where Privoxy can't detect why the connections -# failed. The connection might have failed because of a DNS timeout -# in which case a retry makes sense, but it might also have failed -# because the server doesn't exist or isn't reachable. In this -# case the retry will just delay the appearance of Privoxy's -# error message. -# -# Note that in the context of this option, "forwarded connections" -# includes all connections that Privoxy forwards through other -# proxies. This option is not limited to the HTTP CONNECT method. -# -# Only use this option, if you are getting lots of -# forwarding-related error messages that go away when you try again -# manually. Start with a small value and check Privoxy's logfile -# from time to time, to see how many retries are usually needed. -# -# Examples: -# -# forwarded-connect-retries 1 -# -forwarded-connect-retries 0 -# -# -# 5.4. accept-intercepted-requests -# ================================= -# -# Specifies: -# -# Whether intercepted requests should be treated as valid. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Only proxy requests are accepted, intercepted requests are -# treated as invalid. -# -# Notes: -# -# If you don't trust your clients and want to force them to use -# Privoxy, enable this option and configure your packet filter -# to redirect outgoing HTTP connections into Privoxy. -# -# Make sure that Privoxy's own requests aren't redirected as well. -# Additionally take care that Privoxy can't intentionally connect -# to itself, otherwise you could run into redirection loops if -# Privoxy's listening port is reachable by the outside or an -# attacker has access to the pages you visit. -# -# Examples: -# -# accept-intercepted-requests 1 -# -accept-intercepted-requests 0 -# -# -# 5.5. allow-cgi-request-crunching -# ================================= -# -# Specifies: -# -# Whether requests to Privoxy's CGI pages can be blocked or -# redirected. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Privoxy ignores block and redirect actions for its CGI pages. -# -# Notes: -# -# By default Privoxy ignores block or redirect actions for -# its CGI pages. Intercepting these requests can be useful in -# multi-user setups to implement fine-grained access control, -# but it can also render the complete web interface useless and -# make debugging problems painful if done without care. -# -# Don't enable this option unless you're sure that you really -# need it. -# -# Examples: -# -# allow-cgi-request-crunching 1 -# -allow-cgi-request-crunching 0 -# -# -# 5.6. split-large-forms -# ======================= -# -# Specifies: -# -# Whether the CGI interface should stay compatible with broken -# HTTP clients. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# The CGI form generate long GET URLs. -# -# Notes: -# -# Privoxy's CGI forms can lead to rather long URLs. This isn't -# a problem as far as the HTTP standard is concerned, but it can -# confuse clients with arbitrary URL length limitations. -# -# Enabling split-large-forms causes Privoxy to divide big forms -# into smaller ones to keep the URL length down. It makes editing -# a lot less convenient and you can no longer submit all changes -# at once, but at least it works around this browser bug. -# -# If you don't notice any editing problems, there is no reason -# to enable this option, but if one of the submit buttons appears -# to be broken, you should give it a try. -# -# Examples: -# -# split-large-forms 1 -# -split-large-forms 0 -# -# -# 5.7. keep-alive-timeout -# ======================== -# -# Specifies: -# -# Number of seconds after which an open connection will no longer -# be reused. -# -# Type of value: -# -# Time in seconds. -# -# Default value: -# -# None -# -# Effect if unset: -# -# Connections are not reused. -# -# Notes: -# -# This option has no effect if Privoxy has been compiled without -# keep-alive support. -# -# Notes: -# -# Note that reusing connections doesn't necessary cause -# speedups. There are also a few privacy implications you should -# be aware of. -# -# Outgoing connections are shared between clients (if there are -# more than one) and closing the client that initiated the outgoing -# connection does not affect the connection between Privoxy and -# the server unless the client's request hasn't been completed -# yet. If the outgoing connection is idle, it will not be closed -# until either Privoxy's or the server's timeout is reached. While -# it's open, the server knows that the system running Privoxy is -# still there. -# -# Examples: -# -# keep-alive-timeout 300 -# -keep-alive-timeout 300 -# -# -# 5.8. socket-timeout -# ==================== -# -# Specifies: -# -# Number of seconds after which a socket times out if no data -# is received. -# -# Type of value: -# -# Time in seconds. -# -# Default value: -# -# None -# -# Effect if unset: -# -# A default value of 300 seconds is used. -# -# Notes: -# -# For SOCKS requests the timeout currently doesn't start until -# the SOCKS server accepted the request. This will be fixed in -# the next release. -# -# Examples: -# -# socket-timeout 300 -# -socket-timeout 300 -# -# -# 6. WINDOWS GUI OPTIONS -# ======================= -# -# Privoxy has a number of options specific to the Windows GUI -# interface: -# -# -# If "activity-animation" is set to 1, the Privoxy icon will animate -# when "Privoxy" is active. To turn off, set to 0. -# -#activity-animation 1 -# -# If "log-messages" is set to 1, Privoxy will log messages to the -# console window: -# -#log-messages 1 -# -# If "log-buffer-size" is set to 1, the size of the log buffer, -# i.e. the amount of memory used for the log messages displayed in -# the console window, will be limited to "log-max-lines" (see below). -# -# Warning: Setting this to 0 will result in the buffer to grow -# infinitely and eat up all your memory! -# -#log-buffer-size 1 -# -# log-max-lines is the maximum number of lines held in the log -# buffer. See above. -# -#log-max-lines 200 -# -# If "log-highlight-messages" is set to 1, Privoxy will highlight -# portions of the log messages with a bold-faced font: -# -#log-highlight-messages 1 -# -# The font used in the console window: -# -#log-font-name Comic Sans MS -# -# Font size used in the console window: -# -#log-font-size 8 -# -# "show-on-task-bar" controls whether or not Privoxy will appear as -# a button on the Task bar when minimized: -# -#show-on-task-bar 0 -# -# If "close-button-minimizes" is set to 1, the Windows close button -# will minimize Privoxy instead of closing the program (close with -# the exit option on the File menu). -# -#close-button-minimizes 1 -# -# The "hide-console" option is specific to the MS-Win console version -# of Privoxy. If this option is used, Privoxy will disconnect from -# and hide the command console. -# -#hide-console -# -# diff --git a/external/privoxy/config.guess b/external/privoxy/config.guess deleted file mode 100644 index d622a44..0000000 --- a/external/privoxy/config.guess +++ /dev/null @@ -1,1530 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, -# 2011, 2012 Free Software Foundation, Inc. - -timestamp='2012-02-10' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see <http://www.gnu.org/licenses/>. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner. Please send patches (context -# diff format) to <config-patches(a)gnu.org> and include a ChangeLog -# entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.gues… - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches(a)gnu.org>." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi(a)noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha $.*$ processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee(a)wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux${UNAME_RELEASE} - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH="i386" - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH="x86_64" - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include <stdlib.h> - #include <unistd.h> - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*$[A-Z]90$/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case ${UNAME_PROCESSOR} in - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:MSYS*:*) - echo ${UNAME_MACHINE}-pc-msys - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - 8664:Windows_NT:*) - echo x86_64-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - aarch64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - hexagon:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - LIBC=gnu - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-gnu - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - tile*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-pc-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <Richard.M.Bartel(a)ccMail.Census.GOV> - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes <hewes(a)openmarket.com>. - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf(a)swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green(a)stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green(a)stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - i386) - eval $set_cc_for_build - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - UNAME_PROCESSOR="x86_64" - fi - fi ;; - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-?:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk${UNAME_RELEASE} - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo ${UNAME_MACHINE}-unknown-esx - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c <<EOF -#ifdef _SEQUENT_ -# include <sys/types.h> -# include <sys/utsname.h> -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include <sys/param.h> - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach $[0-9]*$.*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include <sys/param.h> -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 <<EOF -$0: unable to guess system type - -This script, last modified $timestamp, has failed to recognize -the operating system you are using. It is advised that you -download the most up to date version of the config scripts from - - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.gues… -and - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;… - -If the version you run ($0) is already up to date, please -send the following data and any information you think might be -pertinent to <config-patches(a)gnu.org> in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/external/privoxy/config.orig b/external/privoxy/config.orig deleted file mode 100644 index 176dd5f..0000000 --- a/external/privoxy/config.orig +++ /dev/null @@ -1,1530 +0,0 @@ -# Sample Configuration File for Privoxy v3.0.12 -# -# $Id: config,v 1.75 2009/03/21 11:35:37 hal9 Exp $ -# -# Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/ -# -#################################################################### -# # -# Table of Contents # -# # -# I. INTRODUCTION # -# II. FORMAT OF THE CONFIGURATION FILE # -# # -# 1. LOCAL SET-UP DOCUMENTATION # -# 2. CONFIGURATION AND LOG FILE LOCATIONS # -# 3. DEBUGGING # -# 4. ACCESS CONTROL AND SECURITY # -# 5. FORWARDING # -# 6. WINDOWS GUI OPTIONS # -# # -#################################################################### -# -# -# I. INTRODUCTION -# =============== -# -# This file holds Privoxy's main configuration. Privoxy detects -# configuration changes automatically, so you don't have to restart -# it unless you want to load a different configuration file. -# -# The configuration will be reloaded with the first request after -# the change was done, this request itself will still use the old -# configuration, though. In other words: it takes two requests before -# you see the result of your changes. Requests that are dropped due -# to ACL don't trigger reloads. -# -# When starting Privoxy on Unix systems, give the location of this -# file as last argument. On Windows systems, Privoxy will look for -# this file with the name 'config.txt' in the current working directory -# of the Privoxy process. -# -# -# II. FORMAT OF THE CONFIGURATION FILE -# ==================================== -# -# Configuration lines consist of an initial keyword followed by a -# list of values, all separated by whitespace (any number of spaces -# or tabs). For example, -# -# actionsfile default.action -# -# Indicates that the actionsfile is named 'default.action'. -# -# The '#' indicates a comment. Any part of a line following a '#' -# is ignored, except if the '#' is preceded by a '\'. -# -# Thus, by placing a # at the start of an existing configuration -# line, you can make it a comment and it will be treated as if it -# weren't there. This is called "commenting out" an option and can -# be useful. Removing the # again is called "uncommenting". -# -# Note that commenting out an option and leaving it at its default -# are two completely different things! Most options behave very -# differently when unset. See the "Effect if unset" explanation in -# each option's description for details. -# -# Long lines can be continued on the next line by using a `\' as the -# last character. -# -# -# -# 1. LOCAL SET-UP DOCUMENTATION -# ============================== -# -# If you intend to operate Privoxy for more users than just yourself, -# it might be a good idea to let them know how to reach you, what -# you block and why you do that, your policies, etc. -# -# -# -# 1.1. user-manual -# ================= -# -# Specifies: -# -# Location of the Privoxy User Manual. -# -# Type of value: -# -# A fully qualified URI -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# http://www.privoxy.org/version/user-manual/ will be used, -# where version is the Privoxy version. -# -# Notes: -# -# The User Manual URI is the single best source of information on -# Privoxy, and is used for help links from some of the internal -# CGI pages. The manual itself is normally packaged with the -# binary distributions, so you probably want to set this to a -# locally installed copy. -# -# Examples: -# -# The best all purpose solution is simply to put the full local -# PATH to where the User Manual is located: -# -# user-manual /usr/share/doc/privoxy/user-manual -# -# -# The User Manual is then available to anyone with -# access to Privoxy, by following the built-in URL: -# http://config.privoxy.org/user-manual/ (or the shortcut: -# http://p.p/user-manual/) -# -# If the documentation is not on the local system, it can be -# accessed from a remote server, as: -# -# user-manual http://example.com/privoxy/user-manual/ -# -# -# WARNING!!! -# -# If set, this option should be the first option in the config -# file, because it is used while the config file is being read. -# -user-manual /home/halb/privoxy/share/doc/privoxy/user-manual/ -# -# -# 1.2. trust-info-url -# ==================== -# -# Specifies: -# -# A URL to be displayed in the error page that users will see if -# access to an untrusted page is denied. -# -# Type of value: -# -# URL -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# No links are displayed on the "untrusted" error page. -# -# Notes: -# -# The value of this option only matters if the experimental trust -# mechanism has been activated. (See trustfile below.) -# -# If you use the trust mechanism, it is a good idea to write -# up some on-line documentation about your trust policy and to -# specify the URL(s) here. Use multiple times for multiple URLs. -# -# The URL(s) should be added to the trustfile as well, so users -# don't end up locked out from the information on why they were -# locked out in the first place! -# -#trust-info-url http://www.example.com/why_we_block.html -#trust-info-url http://www.example.com/what_we_allow.html -# -# -# 1.3. admin-address -# =================== -# -# Specifies: -# -# An email address to reach the Privoxy administrator. -# -# Type of value: -# -# Email address -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# No email address is displayed on error pages and the CGI user -# interface. -# -# Notes: -# -# If both admin-address and proxy-info-url are unset, the whole -# "Local Privoxy Support" box on all generated pages will not -# be shown. -# -#admin-address privoxy-admin(a)example.com -# -# -# 1.4. proxy-info-url -# ==================== -# -# Specifies: -# -# A URL to documentation about the local Privoxy setup, -# configuration or policies. -# -# Type of value: -# -# URL -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# No link to local documentation is displayed on error pages and -# the CGI user interface. -# -# Notes: -# -# If both admin-address and proxy-info-url are unset, the whole -# "Local Privoxy Support" box on all generated pages will not -# be shown. -# -# This URL shouldn't be blocked ;-) -# -#proxy-info-url http://www.example.com/proxy-service.html -# -# -# 2. CONFIGURATION AND LOG FILE LOCATIONS -# ======================================== -# -# Privoxy can (and normally does) use a number of other files for -# additional configuration, help and logging. This section of the -# configuration file tells Privoxy where to find those other files. -# -# The user running Privoxy, must have read permission for all -# configuration files, and write permission to any files that would -# be modified, such as log files and actions files. -# -# -# -# 2.1. confdir -# ============= -# -# Specifies: -# -# The directory where the other configuration files are located. -# -# Type of value: -# -# Path name -# -# Default value: -# -# /etc/privoxy (Unix) or Privoxy installation dir (Windows) -# -# Effect if unset: -# -# Mandatory -# -# Notes: -# -# No trailing "/", please. -# -confdir /home/halb/privoxy/etc -# -# -# 2.2. templdir -# ============== -# -# Specifies: -# -# An alternative directory where the templates are loaded from. -# -# Type of value: -# -# Path name -# -# Default value: -# -# unset -# -# Effect if unset: -# -# The templates are assumed to be located in confdir/template. -# -# Notes: -# -# Privoxy's original templates are usually overwritten with each -# update. Use this option to relocate customized templates that -# should be kept. As template variables might change between -# updates, you shouldn't expect templates to work with Privoxy -# releases other than the one they were part of, though. -# -#templdir . -# -# -# 2.3. logdir -# ============ -# -# Specifies: -# -# The directory where all logging takes place (i.e. where the -# logfile is located). -# -# Type of value: -# -# Path name -# -# Default value: -# -# /var/log/privoxy (Unix) or Privoxy installation dir (Windows) -# -# Effect if unset: -# -# Mandatory -# -# Notes: -# -# No trailing "/", please. -# -logdir /home/halb/privoxy/var/log/privoxy -# -# -# 2.4. actionsfile -# ================= -# -# Specifies: -# -# The actions file(s) to use -# -# Type of value: -# -# Complete file name, relative to confdir -# -# Default values: -# -# match-all.action # Actions that are applied to all sites and maybe overruled later on. -# -# default.action # Main actions file -# -# user.action # User customizations -# -# Effect if unset: -# -# No actions are taken at all. More or less neutral proxying. -# -# Notes: -# -# Multiple actionsfile lines are permitted, and are in fact -# recommended! -# -# The default values are default.action, which is the "main" -# actions file maintained by the developers, and user.action, -# where you can make your personal additions. -# -# Actions files contain all the per site and per URL configuration -# for ad blocking, cookie management, privacy considerations, -# etc. There is no point in using Privoxy without at least one -# actions file. -# -# Note that since Privoxy 3.0.7, the complete filename, including -# the ".action" extension has to be specified. The syntax change -# was necessary to be consistent with the other file options and -# to allow previously forbidden characters. -# -actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on. -actionsfile default.action # Main actions file -actionsfile user.action # User customizations -# -# -# 2.5. filterfile -# ================ -# -# Specifies: -# -# The filter file(s) to use -# -# Type of value: -# -# File name, relative to confdir -# -# Default value: -# -# default.filter (Unix) or default.filter.txt (Windows) -# -# Effect if unset: -# -# No textual content filtering takes place, i.e. all +filter{name} -# actions in the actions files are turned neutral. -# -# Notes: -# -# Multiple filterfile lines are permitted. -# -# The filter files contain content modification rules that use -# regular expressions. These rules permit powerful changes on the -# content of Web pages, and optionally the headers as well, e.g., -# you could try to disable your favorite JavaScript annoyances, -# re-write the actual displayed text, or just have some fun -# playing buzzword bingo with web pages. -# -# The +filter{name} actions rely on the relevant filter (name) -# to be defined in a filter file! -# -# A pre-defined filter file called default.filter that contains a -# number of useful filters for common problems is included in the -# distribution. See the section on the filter action for a list. -# -# It is recommended to place any locally adapted filters into a -# separate file, such as user.filter. -# -filterfile default.filter -#filterfile user.filter # User customizations -# -# -# 2.6. logfile -# ============= -# -# Specifies: -# -# The log file to use -# -# Type of value: -# -# File name, relative to logdir -# -# Default value: -# -# Unset (commented out). When activated: logfile (Unix) or -# privoxy.log (Windows). -# -# Effect if unset: -# -# No logfile is written. -# -# Notes: -# -# The logfile is where all logging and error messages are -# written. The level of detail and number of messages are set with -# the debug option (see below). The logfile can be useful for -# tracking down a problem with Privoxy (e.g., it's not blocking -# an ad you think it should block) and it can help you to monitor -# what your browser is doing. -# -# Depending on the debug options below, the logfile may be a -# privacy risk if third parties can get access to it. As most -# users will never look at it, Privoxy 3.0.7 and later only log -# fatal errors by default. -# -# For most troubleshooting purposes, you will have to change that, -# please refer to the debugging section for details. -# -# Your logfile will grow indefinitely, and you will probably -# want to periodically remove it. On Unix systems, you can do -# this with a cron job (see "man cron"). For Red Hat based Linux -# distributions, a logrotate script has been included. -# -# Any log files must be writable by whatever user Privoxy is -# being run as (on Unix, default user id is "privoxy"). -# -logfile logfile -# -# -# 2.7. trustfile -# =============== -# -# Specifies: -# -# The name of the trust file to use -# -# Type of value: -# -# File name, relative to confdir -# -# Default value: -# -# Unset (commented out). When activated: trust (Unix) or trust.txt -# (Windows) -# -# Effect if unset: -# -# The entire trust mechanism is disabled. -# -# Notes: -# -# The trust mechanism is an experimental feature for building -# white-lists and should be used with care. It is NOT recommended -# for the casual user. -# -# If you specify a trust file, Privoxy will only allow access to -# sites that are specified in the trustfile. Sites can be listed -# in one of two ways: -# -# Prepending a ~ character limits access to this site only (and -# any sub-paths within this site), e.g. ~www.example.com allows -# access to ~www.example.com/ features/news.html, etc. -# -# Or, you can designate sites as trusted referrers, by prepending -# the name with a + character. The effect is that access to -# untrusted sites will be granted -- but only if a link from -# this trusted referrer was used to get there. The link target -# will then be added to the "trustfile" so that future, direct -# accesses will be granted. Sites added via this mechanism do -# not become trusted referrers themselves (i.e. they are added -# with a ~ designation). There is a limit of 512 such entries, -# after which new entries will not be made. -# -# If you use the + operator in the trust file, it may grow -# considerably over time. -# -# It is recommended that Privoxy be compiled with the -# --disable-force, --disable-toggle and --disable-editor options, -# if this feature is to be used. -# -# Possible applications include limiting Internet access for -# children. -# -#trustfile trust -# -# -# 3. DEBUGGING -# ============= -# -# These options are mainly useful when tracing a problem. Note that -# you might also want to invoke Privoxy with the --no-daemon command -# line option when debugging. -# -# -# -# 3.1. debug -# =========== -# -# Specifies: -# -# Key values that determine what information gets logged. -# -# Type of value: -# -# Integer values -# -# Default value: -# -# 0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged) -# -# Effect if unset: -# -# Default value is used (see above). -# -# Notes: -# -# The available debug levels are: -# -# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024. -# debug 2 # show each connection status -# debug 4 # show I/O status -# debug 8 # show header parsing -# debug 16 # log all data written to the network into the logfile -# debug 32 # debug force feature -# debug 64 # debug regular expression filters -# debug 128 # debug redirects -# debug 256 # debug GIF de-animation -# debug 512 # Common Log Format -# debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why. -# debug 2048 # CGI user interface -# debug 4096 # Startup banner and warnings. -# debug 8192 # Non-fatal errors -# -# -# To select multiple debug levels, you can either add them or -# use multiple debug lines. -# -# A debug level of 1 is informative because it will show you each -# request as it happens. 1, 4096 and 8192 are recommended so that -# you will notice when things go wrong. The other levels are -# probably only of interest if you are hunting down a specific -# problem. They can produce a hell of an output (especially 16). -# -# Privoxy used to ship with the debug levels recommended above -# enabled by default, but due to privacy concerns 3.0.7 and later -# are configured to only log fatal errors. -# -# If you are used to the more verbose settings, simply enable -# the debug lines below again. -# -# If you want to use pure CLF (Common Log Format), you should set -# "debug 512" ONLY and not enable anything else. -# -# Privoxy has a hard-coded limit for the length of log messages. If -# it's reached, messages are logged truncated and marked with -# "... [too long, truncated]". -# -# Please don't file any support requests without trying to -# reproduce the problem with increased debug level first. Once -# you read the log messages, you may even be able to solve the -# problem on your own. -# -#debug 1 # Log the destination for each request Privoxy let through. -#debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why. -#debug 4096 # Startup banner and warnings -#debug 8192 # Non-fatal errors -# -# -# 3.2. single-threaded -# ===================== -# -# Specifies: -# -# Whether to run only one server thread. -# -# Type of value: -# -# None -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Multi-threaded (or, where unavailable: forked) operation, -# i.e. the ability to serve multiple requests simultaneously. -# -# Notes: -# -# This option is only there for debugging purposes. It will -# drastically reduce performance. -# -#single-threaded -# -# -# 3.3. hostname -# ============== -# -# Specifies: -# -# The hostname shown on the CGI pages. -# -# Type of value: -# -# Text -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# The hostname provided by the operating system is used. -# -# Notes: -# -# On some misconfigured systems resolving the hostname fails or -# takes too much time and slows Privoxy down. Setting a fixed -# hostname works around the problem. -# -# In other circumstances it might be desirable to show a hostname -# other than the one returned by the operating system. For example -# if the system has several different hostnames and you don't -# want to use the first one. -# -# Note that Privoxy does not validate the specified hostname value. -# -#hostname hostname.example.org -# -# -# 4. ACCESS CONTROL AND SECURITY -# =============================== -# -# This section of the config file controls the security-relevant -# aspects of Privoxy's configuration. -# -# -# -# 4.1. listen-address -# ==================== -# -# Specifies: -# -# The IP address and TCP port on which Privoxy will listen for -# client requests. -# -# Type of value: -# -# [IP-Address]:Port -# -# Default value: -# -# 127.0.0.1:8118 -# -# Effect if unset: -# -# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and -# recommended for home users who run Privoxy on the same machine -# as their browser. -# -# Notes: -# -# You will need to configure your browser(s) to this proxy address -# and port. -# -# If you already have another service running on port 8118, or -# if you want to serve requests from other machines (e.g. on your -# local network) as well, you will need to override the default. -# -# If you leave out the IP address, Privoxy will bind to all -# interfaces (addresses) on your machine and may become reachable -# from the Internet. In that case, consider using access control -# lists (ACL's, see below), and/or a firewall. -# -# If you open Privoxy to untrusted users, you will also -# want to make sure that the following actions are disabled: -# enable-edit-actions and enable-remote-toggle -# -# Example: -# -# Suppose you are running Privoxy on a machine which has the -# address 192.168.0.1 on your local private network (192.168.0.0) -# and has another outside connection with a different address. You -# want it to serve requests from inside only: -# -# listen-address 192.168.0.1:8118 -# -# -listen-address 127.0.0.1:8118 -# -# -# 4.2. toggle -# ============ -# -# Specifies: -# -# Initial state of "toggle" status -# -# Type of value: -# -# 1 or 0 -# -# Default value: -# -# 1 -# -# Effect if unset: -# -# Act as if toggled on -# -# Notes: -# -# If set to 0, Privoxy will start in "toggled off" mode, -# i.e. mostly behave like a normal, content-neutral proxy -# with both ad blocking and content filtering disabled. See -# enable-remote-toggle below. -# -# The windows version will only display the toggle icon in the -# system tray if this option is present. -# -toggle 1 -# -# -# 4.3. enable-remote-toggle -# ========================== -# -# Specifies: -# -# Whether or not the web-based toggle feature may be used -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# The web-based toggle feature is disabled. -# -# Notes: -# -# When toggled off, Privoxy mostly acts like a normal, -# content-neutral proxy, i.e. doesn't block ads or filter content. -# -# Access to the toggle feature can not be controlled separately by -# "ACLs" or HTTP authentication, so that everybody who can access -# Privoxy (see "ACLs" and listen-address above) can toggle it -# for all users. So this option is not recommended for multi-user -# environments with untrusted users. -# -# Note that malicious client side code (e.g Java) is also capable -# of using this option. -# -# As a lot of Privoxy users don't read documentation, this feature -# is disabled by default. -# -# Note that you must have compiled Privoxy with support for this -# feature, otherwise this option has no effect. -# -enable-remote-toggle 0 -# -# -# 4.4. enable-remote-http-toggle -# =============================== -# -# Specifies: -# -# Whether or not Privoxy recognizes special HTTP headers to change -# its behaviour. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Privoxy ignores special HTTP headers. -# -# Notes: -# -# When toggled on, the client can change Privoxy's behaviour by -# setting special HTTP headers. Currently the only supported -# special header is "X-Filter: No", to disable filtering for -# the ongoing request, even if it is enabled in one of the -# action files. -# -# This feature is disabled by default. If you are using Privoxy in -# a environment with trusted clients, you may enable this feature -# at your discretion. Note that malicious client side code (e.g -# Java) is also capable of using this feature. -# -# This option will be removed in future releases as it has been -# obsoleted by the more general header taggers. -# -enable-remote-http-toggle 0 -# -# -# 4.5. enable-edit-actions -# ========================= -# -# Specifies: -# -# Whether or not the web-based actions file editor may be used -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# The web-based actions file editor is disabled. -# -# Notes: -# -# Access to the editor can not be controlled separately by -# "ACLs" or HTTP authentication, so that everybody who can access -# Privoxy (see "ACLs" and listen-address above) can modify its -# configuration for all users. -# -# This option is not recommended for environments with untrusted -# users and as a lot of Privoxy users don't read documentation, -# this feature is disabled by default. -# -# Note that malicious client side code (e.g Java) is also capable -# of using the actions editor and you shouldn't enable this -# options unless you understand the consequences and are sure -# your browser is configured correctly. -# -# Note that you must have compiled Privoxy with support for this -# feature, otherwise this option has no effect. -# -enable-edit-actions 0 -# -# -# 4.6. enforce-blocks -# ==================== -# -# Specifies: -# -# Whether the user is allowed to ignore blocks and can "go there -# anyway". -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Blocks are not enforced. -# -# Notes: -# -# Privoxy is mainly used to block and filter requests as a service -# to the user, for example to block ads and other junk that clogs -# the pipes. Privoxy's configuration isn't perfect and sometimes -# innocent pages are blocked. In this situation it makes sense to -# allow the user to enforce the request and have Privoxy ignore -# the block. -# -# In the default configuration Privoxy's "Blocked" page contains -# a "go there anyway" link to adds a special string (the force -# prefix) to the request URL. If that link is used, Privoxy -# will detect the force prefix, remove it again and let the -# request pass. -# -# Of course Privoxy can also be used to enforce a network -# policy. In that case the user obviously should not be able to -# bypass any blocks, and that's what the "enforce-blocks" option -# is for. If it's enabled, Privoxy hides the "go there anyway" -# link. If the user adds the force prefix by hand, it will not -# be accepted and the circumvention attempt is logged. -# -# Examples: -# -# enforce-blocks 1 -# -enforce-blocks 0 -# -# -# 4.7. ACLs: permit-access and deny-access -# ========================================= -# -# Specifies: -# -# Who can access what. -# -# Type of value: -# -# src_addr[/src_masklen] [dst_addr[/dst_masklen]] -# -# Where src_addr and dst_addr are IP addresses in dotted decimal -# notation or valid DNS names, and src_masklen and dst_masklen are -# subnet masks in CIDR notation, i.e. integer values from 2 to 30 -# representing the length (in bits) of the network address. The -# masks and the whole destination part are optional. -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Don't restrict access further than implied by listen-address -# -# Notes: -# -# Access controls are included at the request of ISPs and systems -# administrators, and are not usually needed by individual -# users. For a typical home user, it will normally suffice to -# ensure that Privoxy only listens on the localhost (127.0.0.1) -# or internal (home) network address by means of the listen-address -# option. -# -# Please see the warnings in the FAQ that Privoxy is not intended -# to be a substitute for a firewall or to encourage anyone to -# defer addressing basic security weaknesses. -# -# Multiple ACL lines are OK. If any ACLs are specified, Privoxy -# only talks to IP addresses that match at least one permit-access -# line and don't match any subsequent deny-access line. In other -# words, the last match wins, with the default being deny-access. -# -# If Privoxy is using a forwarder (see forward below) for a -# particular destination URL, the dst_addr that is examined is -# the address of the forwarder and NOT the address of the ultimate -# target. This is necessary because it may be impossible for the -# local Privoxy to determine the IP address of the ultimate target -# (that's often what gateways are used for). -# -# You should prefer using IP addresses over DNS names, because -# the address lookups take time. All DNS names must resolve! You -# can not use domain patterns like "*.org" or partial domain -# names. If a DNS name resolves to multiple IP addresses, only -# the first one is used. -# -# Denying access to particular sites by ACL may have undesired -# side effects if the site in question is hosted on a machine -# which also hosts other sites (most sites are). -# -# Examples: -# -# Explicitly define the default behavior if no ACL and -# listen-address are set: "localhost" is OK. The absence of a -# dst_addr implies that all destination addresses are OK: -# -# permit-access localhost -# -# -# Allow any host on the same class C subnet as www.privoxy.org -# access to nothing but www.example.com (or other domains hosted -# on the same system): -# -# permit-access www.privoxy.org/24 www.example.com/32 -# -# -# Allow access from any host on the 26-bit subnet 192.168.45.64 to -# anywhere, with the exception that 192.168.45.73 may not access -# the IP address behind www.dirty-stuff.example.com: -# -# permit-access 192.168.45.64/26 -# deny-access 192.168.45.73 www.dirty-stuff.example.com -# -# -# -# 4.8. buffer-limit -# ================== -# -# Specifies: -# -# Maximum size of the buffer for content filtering. -# -# Type of value: -# -# Size in Kbytes -# -# Default value: -# -# 4096 -# -# Effect if unset: -# -# Use a 4MB (4096 KB) limit. -# -# Notes: -# -# For content filtering, i.e. the +filter and +deanimate-gif -# actions, it is necessary that Privoxy buffers the entire document -# body. This can be potentially dangerous, since a server could -# just keep sending data indefinitely and wait for your RAM to -# exhaust -- with nasty consequences. Hence this option. -# -# When a document buffer size reaches the buffer-limit, it is -# flushed to the client unfiltered and no further attempt to filter -# the rest of the document is made. Remember that there may be -# multiple threads running, which might require up to buffer-limit -# Kbytes each, unless you have enabled "single-threaded" above. -# -buffer-limit 4096 -# -# -# 5. FORWARDING -# ============== -# -# This feature allows routing of HTTP requests through a chain of -# multiple proxies. -# -# Forwarding can be used to chain Privoxy with a caching proxy to -# speed up browsing. Using a parent proxy may also be necessary if -# the machine that Privoxy runs on has no direct Internet access. -# -# Note that parent proxies can severely decrease your privacy -# level. For example a parent proxy could add your IP address to the -# request headers and if it's a caching proxy it may add the "Etag" -# header to revalidation requests again, even though you configured -# Privoxy to remove it. It may also ignore Privoxy's header time -# randomization and use the original values which could be used by -# the server as cookie replacement to track your steps between visits. -# -# Also specified here are SOCKS proxies. Privoxy supports the SOCKS -# 4 and SOCKS 4A protocols. -# -# -# -# 5.1. forward -# ============= -# -# Specifies: -# -# To which parent HTTP proxy specific requests should be routed. -# -# Type of value: -# -# target_pattern http_parent[:port] -# -# where target_pattern is a URL pattern that specifies to which -# requests (i.e. URLs) this forward rule shall apply. Use / -# to denote "all URLs". http_parent[:port] is the DNS name or -# IP address of the parent HTTP proxy through which the requests -# should be forwarded, optionally followed by its listening port -# (default: 8080). Use a single dot (.) to denote "no forwarding". -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Don't use parent HTTP proxies. -# -# Notes: -# -# If http_parent is ".", then requests are not forwarded to -# another HTTP proxy but are made directly to the web servers. -# -# Multiple lines are OK, they are checked in sequence, and the -# last match wins. -# -# Examples: -# -# Everything goes to an example parent proxy, except SSL on port -# 443 (which it doesn't handle): -# -# forward / parent-proxy.example.org:8080 -# forward :443 . -# -# -# Everything goes to our example ISP's caching proxy, except for -# requests to that ISP's sites: -# -# forward / caching-proxy.isp.example.net:8000 -# forward .isp.example.net . -# -# -# -# -# 5.2. forward-socks4, forward-socks4a and forward-socks5 -# ======================================================== -# -# Specifies: -# -# Through which SOCKS proxy (and optionally to which parent HTTP -# proxy) specific requests should be routed. -# -# Type of value: -# -# target_pattern socks_proxy[:port] http_parent[:port] -# -# where target_pattern is a URL pattern that specifies to which -# requests (i.e. URLs) this forward rule shall apply. Use / to -# denote "all URLs". http_parent and socks_proxy are IP addresses -# in dotted decimal notation or valid DNS names (http_parent may -# be "." to denote "no HTTP forwarding"), and the optional port -# parameters are TCP ports, i.e. integer values from 1 to 65535 -# -# Default value: -# -# Unset -# -# Effect if unset: -# -# Don't use SOCKS proxies. -# -# Notes: -# -# Multiple lines are OK, they are checked in sequence, and the -# last match wins. -# -# The difference between forward-socks4 and forward-socks4a -# is that in the SOCKS 4A protocol, the DNS resolution of the -# target hostname happens on the SOCKS server, while in SOCKS 4 -# it happens locally. -# -# With forward-socks5 the DNS resolution will happen on the remote -# server as well. -# -# If http_parent is ".", then requests are not forwarded to another -# HTTP proxy but are made (HTTP-wise) directly to the web servers, -# albeit through a SOCKS proxy. -# -# Examples: -# -# From the company example.com, direct connections are made to all -# "internal" domains, but everything outbound goes through their -# ISP's proxy by way of example.com's corporate SOCKS 4A gateway -# to the Internet. -# -# forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 -# forward .example.com . -# -# -# A rule that uses a SOCKS 4 gateway for all destinations but no -# HTTP parent looks like this: -# -# forward-socks4 / socks-gw.example.com:1080 . -# -# -# To chain Privoxy and Tor, both running on the same system, -# you would use something like: -# -# forward-socks4a / 127.0.0.1:9050 . -# -# -# The public Tor network can't be used to reach your local network, -# if you need to access local servers you therefore might want -# to make some exceptions: -# -# forward 192.168.*.*/ . -# forward 10.*.*.*/ . -# forward 127.*.*.*/ . -# -# -# Unencrypted connections to systems in these address ranges will -# be as (un) secure as the local network is, but the alternative -# is that you can't reach the local network through Privoxy at -# all. Of course this may actually be desired and there is no -# reason to make these exceptions if you aren't sure you need them. -# -# If you also want to be able to reach servers in your local -# network by using their names, you will need additional exceptions -# that look like this: -# -# forward localhost/ . -# -# -# -# -# 5.3. forwarded-connect-retries -# =============================== -# -# Specifies: -# -# How often Privoxy retries if a forwarded connection request -# fails. -# -# Type of value: -# -# Number of retries. -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Connections forwarded through other proxies are treated like -# direct connections and no retry attempts are made. -# -# Notes: -# -# forwarded-connect-retries is mainly interesting for socks4a -# connections, where Privoxy can't detect why the connections -# failed. The connection might have failed because of a DNS timeout -# in which case a retry makes sense, but it might also have failed -# because the server doesn't exist or isn't reachable. In this -# case the retry will just delay the appearance of Privoxy's -# error message. -# -# Note that in the context of this option, "forwarded connections" -# includes all connections that Privoxy forwards through other -# proxies. This option is not limited to the HTTP CONNECT method. -# -# Only use this option, if you are getting lots of -# forwarding-related error messages that go away when you try again -# manually. Start with a small value and check Privoxy's logfile -# from time to time, to see how many retries are usually needed. -# -# Examples: -# -# forwarded-connect-retries 1 -# -forwarded-connect-retries 0 -# -# -# 5.4. accept-intercepted-requests -# ================================= -# -# Specifies: -# -# Whether intercepted requests should be treated as valid. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Only proxy requests are accepted, intercepted requests are -# treated as invalid. -# -# Notes: -# -# If you don't trust your clients and want to force them to use -# Privoxy, enable this option and configure your packet filter -# to redirect outgoing HTTP connections into Privoxy. -# -# Make sure that Privoxy's own requests aren't redirected as well. -# Additionally take care that Privoxy can't intentionally connect -# to itself, otherwise you could run into redirection loops if -# Privoxy's listening port is reachable by the outside or an -# attacker has access to the pages you visit. -# -# Examples: -# -# accept-intercepted-requests 1 -# -accept-intercepted-requests 0 -# -# -# 5.5. allow-cgi-request-crunching -# ================================= -# -# Specifies: -# -# Whether requests to Privoxy's CGI pages can be blocked or -# redirected. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# Privoxy ignores block and redirect actions for its CGI pages. -# -# Notes: -# -# By default Privoxy ignores block or redirect actions for -# its CGI pages. Intercepting these requests can be useful in -# multi-user setups to implement fine-grained access control, -# but it can also render the complete web interface useless and -# make debugging problems painful if done without care. -# -# Don't enable this option unless you're sure that you really -# need it. -# -# Examples: -# -# allow-cgi-request-crunching 1 -# -allow-cgi-request-crunching 0 -# -# -# 5.6. split-large-forms -# ======================= -# -# Specifies: -# -# Whether the CGI interface should stay compatible with broken -# HTTP clients. -# -# Type of value: -# -# 0 or 1 -# -# Default value: -# -# 0 -# -# Effect if unset: -# -# The CGI form generate long GET URLs. -# -# Notes: -# -# Privoxy's CGI forms can lead to rather long URLs. This isn't -# a problem as far as the HTTP standard is concerned, but it can -# confuse clients with arbitrary URL length limitations. -# -# Enabling split-large-forms causes Privoxy to divide big forms -# into smaller ones to keep the URL length down. It makes editing -# a lot less convenient and you can no longer submit all changes -# at once, but at least it works around this browser bug. -# -# If you don't notice any editing problems, there is no reason -# to enable this option, but if one of the submit buttons appears -# to be broken, you should give it a try. -# -# Examples: -# -# split-large-forms 1 -# -split-large-forms 0 -# -# -# 5.7. keep-alive-timeout -# ======================== -# -# Specifies: -# -# Number of seconds after which an open connection will no longer -# be reused. -# -# Type of value: -# -# Time in seconds. -# -# Default value: -# -# None -# -# Effect if unset: -# -# Connections are not reused. -# -# Notes: -# -# This option has no effect if Privoxy has been compiled without -# keep-alive support. -# -# Notes: -# -# Note that reusing connections doesn't necessary cause -# speedups. There are also a few privacy implications you should -# be aware of. -# -# Outgoing connections are shared between clients (if there are -# more than one) and closing the client that initiated the outgoing -# connection does not affect the connection between Privoxy and -# the server unless the client's request hasn't been completed -# yet. If the outgoing connection is idle, it will not be closed -# until either Privoxy's or the server's timeout is reached. While -# it's open, the server knows that the system running Privoxy is -# still there. -# -# Examples: -# -# keep-alive-timeout 300 -# -keep-alive-timeout 300 -# -# -# 5.8. socket-timeout -# ==================== -# -# Specifies: -# -# Number of seconds after which a socket times out if no data -# is received. -# -# Type of value: -# -# Time in seconds. -# -# Default value: -# -# None -# -# Effect if unset: -# -# A default value of 300 seconds is used. -# -# Notes: -# -# For SOCKS requests the timeout currently doesn't start until -# the SOCKS server accepted the request. This will be fixed in -# the next release. -# -# Examples: -# -# socket-timeout 300 -# -socket-timeout 300 -# -# -# 6. WINDOWS GUI OPTIONS -# ======================= -# -# Privoxy has a number of options specific to the Windows GUI -# interface: -# -# -# If "activity-animation" is set to 1, the Privoxy icon will animate -# when "Privoxy" is active. To turn off, set to 0. -# -#activity-animation 1 -# -# If "log-messages" is set to 1, Privoxy will log messages to the -# console window: -# -#log-messages 1 -# -# If "log-buffer-size" is set to 1, the size of the log buffer, -# i.e. the amount of memory used for the log messages displayed in -# the console window, will be limited to "log-max-lines" (see below). -# -# Warning: Setting this to 0 will result in the buffer to grow -# infinitely and eat up all your memory! -# -#log-buffer-size 1 -# -# log-max-lines is the maximum number of lines held in the log -# buffer. See above. -# -#log-max-lines 200 -# -# If "log-highlight-messages" is set to 1, Privoxy will highlight -# portions of the log messages with a bold-faced font: -# -#log-highlight-messages 1 -# -# The font used in the console window: -# -#log-font-name Comic Sans MS -# -# Font size used in the console window: -# -#log-font-size 8 -# -# "show-on-task-bar" controls whether or not Privoxy will appear as -# a button on the Task bar when minimized: -# -#show-on-task-bar 0 -# -# If "close-button-minimizes" is set to 1, the Windows close button -# will minimize Privoxy instead of closing the program (close with -# the exit option on the File menu). -# -#close-button-minimizes 1 -# -# The "hide-console" option is specific to the MS-Win console version -# of Privoxy. If this option is used, Privoxy will disconnect from -# and hide the command console. -# -#hide-console -# -# diff --git a/external/privoxy/config.sub b/external/privoxy/config.sub deleted file mode 100644 index c894da4..0000000 --- a/external/privoxy/config.sub +++ /dev/null @@ -1,1773 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, -# 2011, 2012 Free Software Foundation, Inc. - -timestamp='2012-02-10' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see <http://www.gnu.org/licenses/>. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to <config-patches(a)gnu.org>. Submit a context -# diff and a properly formatted GNU ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;… - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches(a)gnu.org>." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\1/'` - ;; - android-linux) - os=-linux-android - basic_machine=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\1/'`-unknown - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | aarch64 | aarch64_be \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | be32 | be64 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | epiphany \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | hexagon \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | le32 | le64 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nds32 | nds32le | nds32be \ - | nios | nios2 \ - | ns16k | ns32k \ - | open8 \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pyramid \ - | rl78 | rx \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu \ - | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ - | ubicom32 \ - | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | we32k \ - | x86 | xc16x | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - c54x) - basic_machine=tic54x-unknown - ;; - c55x) - basic_machine=tic55x-unknown - ;; - c6x) - basic_machine=tic6x-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - strongarm | thumb | xscale) - basic_machine=arm-unknown - ;; - xgate) - basic_machine=$basic_machine-unknown - os=-none - ;; - xscaleeb) - basic_machine=armeb-unknown - ;; - - xscaleel) - basic_machine=armel-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | aarch64-* | aarch64_be-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | be32-* | be64-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | hexagon-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | le32-* | le64-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | open8-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pyramid-* \ - | rl78-* | romp-* | rs6000-* | rx-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ - | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile*-* \ - | tron-* \ - | ubicom32-* \ - | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ - | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c54x-*) - basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c55x-*) - basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c6x-*) - basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16 | cr16-*) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - microblaze) - basic_machine=microblaze-xilinx - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - msys) - basic_machine=i386-pc - os=-msys - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - nacl) - basic_machine=le32-unknown - os=-nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - neo-tandem) - basic_machine=neo-tandem - ;; - nse-tandem) - basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc | ppcbe) basic_machine=powerpc-unknown - ;; - ppc-* | ppcbe-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - strongarm-* | thumb-*) - basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tile*) - basic_machine=$basic_machine-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - xscale-* | xscalee[bl]-*) - basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -nacl*) - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - tic54x-*) - os=-coff - ;; - tic55x-*) - os=-coff - ;; - tic6x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/external/privoxy/configure.in b/external/privoxy/configure.in deleted file mode 100644 index 2945a7a..0000000 --- a/external/privoxy/configure.in +++ /dev/null @@ -1,1463 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. -dnl -dnl $Id: configure.in,v 1.126 2009/03/21 10:45:06 fabiankeil Exp $ -dnl -dnl Written by and Copyright (C) 2001-2009 the -dnl Privoxy team. http://www.privoxy.org/ -dnl -dnl Based on the Internet Junkbuster originally written -dnl by and Copyright (C) 1997 Anonymous Coders and -dnl Junkbusters Corporation. http://www.junkbusters.com -dnl -dnl This program is free software; you can redistribute it -dnl and/or modify it under the terms of the GNU General -dnl Public License as published by the Free Software -dnl Foundation; either version 2 of the License, or (at -dnl your option) any later version. -dnl -dnl This program is distributed in the hope that it will -dnl be useful, but WITHOUT ANY WARRANTY; without even the -dnl implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. See the GNU General Public -dnl License for more details. -dnl -dnl The GNU General Public License should be included with -dnl this file. If not, you can view it at -dnl http://www.gnu.org/copyleft/gpl.html -dnl or write to the Free Software Foundation, Inc., 59 -dnl Temple Place - Suite 330, Boston, MA 02111-1307, USA. -dnl -dnl $Log: configure.in,v $ -dnl Revision 1.126 2009/03/21 10:45:06 fabiankeil -dnl Declare the code stable. -dnl -dnl Revision 1.125 2009/02/25 16:58:03 fabiankeil -dnl And the journey continues. Bump version to 3.0.12 UNRELEASED. -dnl -dnl Revision 1.124 2009/02/12 15:42:00 fabiankeil -dnl Declare the code stable. -dnl -dnl Revision 1.123 2009/02/06 18:17:32 fabiankeil -dnl Boldly enable keep-alive support where possible. -dnl -dnl Revision 1.122 2008/10/18 11:17:52 fabiankeil -dnl Connection keep-alive support is ready for testing, -dnl allow enabling it through the configure script. -dnl -dnl Revision 1.121 2008/08/30 12:03:07 fabiankeil -dnl Remove FEATURE_COOKIE_JAR. -dnl -dnl Revision 1.120 2008/08/21 17:19:50 fabiankeil -dnl Change version to 3.0.11 UNRELEASED. -dnl -dnl Revision 1.119 2008/08/13 16:53:50 fabiankeil -dnl Change version to 3.0.10 stable. -dnl -dnl Revision 1.118 2008/06/27 12:50:44 fabiankeil -dnl Here's looking at you, Gentoo Linux: Show a warning if -dnl --disable-pthread is used even though pthreads are available. -dnl -dnl Revision 1.117 2008/06/14 12:47:30 fabiankeil -dnl Set CODE_STATUS to beta. -dnl -dnl Revision 1.116 2008/06/08 11:55:09 fabiankeil -dnl - Show a warning if the soon-to-be-removed static PCRE code is used. -dnl - Hide the "using built-in static pcrs" message. With dynamic linking -dnl against PCRS disabled, the message isn't particularly useful. -dnl -dnl Revision 1.115 2008/05/25 15:50:14 fabiankeil -dnl Try to use zlib by default, but just show a warning if it's -dnl unavailable. Remove --enable-zlib, add --disable-zlib. -dnl -dnl Revision 1.114 2008/04/06 15:18:33 fabiankeil -dnl Oh well, rename the --enable-pcre-host-patterns option to -dnl --enable-extended-host-patterns as it's not really PCRE syntax. -dnl -dnl Revision 1.113 2008/04/06 14:54:26 fabiankeil -dnl Use PCRE syntax in host patterns when configured -dnl with --enable-pcre-host-patterns. -dnl -dnl Revision 1.112 2008/03/27 18:27:22 fabiankeil -dnl Remove kill-popups action. -dnl -dnl Revision 1.111 2008/02/03 14:40:47 fabiankeil -dnl Remove unused OSX_DARWIN macro. Reported by Mark Miller in #1852529. -dnl -dnl Revision 1.110 2008/01/26 10:52:13 fabiankeil -dnl Change version to 3.0.9 UNRELEASED. -dnl -dnl Revision 1.109 2008/01/20 14:07:09 fabiankeil -dnl Set CODE_STATUS to stable. -dnl -dnl Revision 1.108 2007/12/10 02:30:00 hal9 -dnl Change versioning for > 3.0.7 && < 3.0.8 -dnl -dnl Revision 1.107 2007/11/15 02:50:14 hal9 -dnl Setting to "beta" (for doc builds, etc). -dnl -dnl Revision 1.106 2007/05/11 11:49:41 fabiankeil -dnl Check for strlcat(). -dnl -dnl Revision 1.105 2007/04/09 17:34:58 fabiankeil -dnl Check for snprintf(). -dnl -dnl Revision 1.104 2007/03/31 13:35:11 fabiankeil -dnl Add checks for gettimeofday() and strlcpy(). -dnl -dnl Revision 1.103 2007/01/20 16:29:38 fabiankeil -dnl Suppress edit buttons for action files if Privoxy has -dnl no write access. Suggested by Roland in PR 1564026. -dnl -dnl Revision 1.102 2007/01/18 14:55:45 fabiankeil -dnl Check for tzset() and putenv() to make sure the -dnl replacement timegm() isn't included on systems -dnl where it fails to compile. -dnl -dnl Revision 1.101 2007/01/12 15:20:17 fabiankeil -dnl Temporarily ignore external libpcrs to prevent -dnl problems that are fixed in Privoxy's own version. -dnl -dnl Revision 1.100 2007/01/07 07:38:10 joergs -dnl Disabled -pipe for AmigaOS4. -dnl -dnl Revision 1.99 2007/01/01 19:36:37 fabiankeil -dnl Integrate a modified version of Wil Mahan's -dnl zlib patch (PR #895531). -dnl -dnl Revision 1.98 2006/12/17 19:15:26 fabiankeil -dnl Added ./configure switch for FEATURE_GRACEFUL_TERMINATION. -dnl -dnl Revision 1.97 2006/11/21 18:32:46 hal9 -dnl Setting version to 3.0.7 UNRELEASED for lack of a better setting. -dnl -dnl Revision 1.96 2006/11/18 14:42:51 fabiankeil -dnl Mark as stable. -dnl -dnl Revision 1.95 2006/11/14 02:08:59 hal9 -dnl Setting version string to 3.0.6 UNRELEASED. This needs to be reset to 3.0.6 -dnl stable just before CVS is tagged for release. -dnl -dnl Revision 1.94 2006/11/13 19:05:50 fabiankeil -dnl Make pthread mutex locking more generic. Instead of -dnl checking for OSX and OpenBSD, check for FEATURE_PTHREAD -dnl and use mutex locking unless there is an _r function -dnl available. Better safe than sorry. -dnl -dnl Fixes "./configure --disable-pthread" and should result -dnl in less threading-related problems on pthread-using platforms, -dnl but it still doesn't fix BR#1122404. -dnl -dnl Revision 1.93 2006/09/22 01:26:20 hal9 -dnl Set version to 3.0.5 BETA for hopefully release this weekend. -dnl -dnl Revision 1.92 2006/08/17 17:09:49 fabiankeil -dnl Added check for timegm(). -dnl -dnl Revision 1.91 2006/08/13 22:01:51 fabiankeil -dnl Added checks for strptime() and random() -dnl -dnl Revision 1.90 2006/07/18 14:48:45 david__schmidt -dnl Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -dnl with what was really the latest development (the v_3_0_branch branch) -dnl -dnl Revision 1.68.2.20 2004/01/31 16:31:46 oes -dnl Resetting version info to 0.0.0 UNRELEASED -dnl -dnl Revision 1.68.2.19 2004/01/30 09:26:03 oes -dnl Added docbook paths for debian sarge; set status for release -dnl -dnl Revision 1.68.2.18 2003/12/08 15:10:29 oes -dnl Bugfix: --with-docbook now correctly accepts its path parameter. Thanks, Roland! -dnl -dnl Revision 1.68.2.17 2003/10/18 18:41:26 david__schmidt -dnl Update to remain buildable on OS/2 - remove the failures -dnl due to missing unixisms -dnl -dnl Revision 1.68.2.16 2003/03/26 16:05:14 oes -dnl Marked as 0.0.0 UNRELEASED -dnl -dnl Revision 1.68.2.15 2003/03/26 00:25:00 oes -dnl Bump version for 3.0.2 -dnl -dnl Revision 1.68.2.14 2003/03/25 13:27:12 hal9 -dnl Manually apply Docbook/FreeBSD patch #708081 from a.go at tiscali.nl. -dnl -dnl Revision 1.68.2.13 2003/03/18 19:38:57 oes -dnl Set version info for 3.0.1 release -dnl -dnl Revision 1.68.2.12 2003/03/07 03:41:04 david__schmidt -dnl Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX. Hopefully this will take care of all of those pesky crash reports. -dnl -dnl Revision 1.68.2.11 2003/03/06 15:22:37 oes -dnl Fixed minor shell syntax bug -dnl -dnl Revision 1.68.2.10 2003/01/08 16:39:41 oes -dnl Changing default to exclude FEATURE_IMAGE_DETECT_MSIE because of problem reports with recent IEs -dnl -dnl Revision 1.68.2.9 2002/12/13 23:47:45 hal9 -dnl Add openbsd $specialflags per gunner at styx2002.no-ip.org -dnl -dnl Revision 1.68.2.8 2002/11/27 12:55:26 oes -dnl Fixed broken handling of pre-set CFLAGS -dnl -dnl Revision 1.68.2.7 2002/10/25 02:44:22 hal9 -dnl Port of make install, etc from main trunk. Needs testing! Add Slackware -dnl support, and other related changes. Update related docs. -dnl -dnl Revision 1.68.2.6 2002/09/25 15:35:15 oes -dnl Marking as non-release -dnl -dnl Revision 1.68.2.5 2002/08/25 23:37:00 hal9 -dnl Getting ready for 3.0 release. -dnl -dnl Revision 1.68.2.4 2002/08/10 11:21:57 oes -dnl - Set Version to 2.9.20 (beta) -dnl - Add two AC_DEFINEs that indicate if the pcre*.h headers -dnl are located in a pcre/ subdir to the include path. -dnl -dnl Revision 1.68.2.3 2002/08/06 11:29:36 oes -dnl Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH -dnl -dnl Revision 1.68.2.2 2002/07/30 19:36:09 hal9 -dnl Bump version to 2.9.17. -dnl -dnl Revision 1.68.2.1 2002/07/26 15:21:12 oes -dnl Bumped version number for 2.9.16 freeze -dnl -dnl Revision 1.68 2002/05/25 16:54:54 jongfoster -dnl Detect if the compiler supports -pthread. -dnl Hopefully this will fix bug 560442. (I don't have a HP PA-RISC -dnl machine to test this!) -dnl -dnl Revision 1.67 2002/05/03 14:33:59 oes -dnl Generate doc/soucre/ldp.dsl -dnl -dnl Revision 1.66 2002/05/03 00:41:56 oes -dnl Set version to 2.9.15 to comply with new versioning scheme -dnl -dnl Revision 1.65 2002/04/25 19:13:57 morcego -dnl Removed RPM release number declaration on configure.in -dnl Changed makefile to use given value for RPM_PACKAGEV when on uploading -dnl targets (will produce an error, explaining who to do it, if no value -dnl if provided). -dnl -dnl Revision 1.64 2002/04/22 16:32:31 morcego -dnl configure.in, *.spec: Bumping release to 2 (2.9.14-2) -dnl -rh.spec: uid and gid are now macros -dnl -suse.spec: Changing the header Copyright to License (Copyright is -dnl deprecable) -dnl -dnl Revision 1.63 2002/04/11 11:00:21 oes -dnl Applied Moritz' fix for socklen_t on Solaris -dnl -dnl Revision 1.62 2002/04/11 10:09:20 oes -dnl Version 2.9.14 -dnl -dnl Revision 1.61 2002/04/10 18:14:45 morcego -dnl - (privoxy-rh.spec only) Relisting template files on the %%files section -dnl - (configure.in, privoxy-rh.spec) Bumped package release to 5 -dnl -dnl Revision 1.60 2002/04/09 16:38:49 oes -dnl Added detection of missing config.h.in -dnl -dnl Revision 1.59 2002/04/06 20:23:55 jongfoster -dnl Removing unnessacery tests (C++, ranlib) -dnl -dnl Revision 1.58 2002/04/04 20:49:20 swa -dnl attempt to consolidate the -dnl different dokbook versions. -dnl -dnl Revision 1.57 2002/04/04 00:36:36 gliptak -dnl always use pcre for matching -dnl -dnl Revision 1.56 2002/04/03 22:28:03 gliptak -dnl Removed references to gnu_regex -dnl -dnl Revision 1.55 2002/04/03 03:54:38 gliptak -dnl Checking pcre version -dnl -dnl Revision 1.54 2002/04/01 00:54:24 gliptak -dnl More changes needed around regex support. -dnl -dnl Revision 1.53 2002/03/29 20:09:01 swa -dnl al's patch -dnl -dnl Revision 1.52 2002/03/29 19:51:40 gliptak -dnl Correcting compile problem with Debian -dnl -dnl Revision 1.51 2002/03/28 20:43:00 swa -dnl set make correctly -dnl -dnl Revision 1.50 2002/03/27 03:03:45 hal9 -dnl Add test for man2html -dnl -dnl Revision 1.49 2002/03/27 02:19:52 david__schmidt -dnl More Mac OSX support: -dnl - Get rid of extraneous, noisy -pthread warnings -dnl - Define unix so we get oes' unix-tagged changes -dnl -dnl Revision 1.48 2002/03/26 22:29:54 swa -dnl we have a new homepage! -dnl -dnl Revision 1.47 2002/03/26 16:41:00 hal9 -dnl Upped RPM Release to 3 (need to build new RH packages) -dnl -dnl Revision 1.46 2002/03/24 18:55:06 jongfoster -dnl Making Docbook work under Windows -dnl -dnl Revision 1.45 2002/03/24 14:19:55 swa -dnl set rpm package release in configure.in. nowhere else. -dnl -dnl Revision 1.44 2002/03/24 13:25:43 swa -dnl name change related issues -dnl -dnl Revision 1.43 2002/03/24 12:56:21 swa -dnl name change related issues. -dnl -dnl Revision 1.42 2002/03/22 18:11:37 jongfoster -dnl Bumping version number to 2.9.12 -dnl -dnl Revision 1.41 2002/03/19 19:30:04 morcego -dnl - Fixing stylesheet checking on configure. If it is found, no further checks -dnl should be done -dnl -dnl - configure will now check for db2html or docbook2html (should work now -dnl on SuSe without the docbktls package) -dnl -dnl Revision 1.40 2002/03/09 14:33:30 oes -dnl Fixing the (harmless) AC_CHECK_FILE warnings -dnl -dnl Revision 1.39 2002/03/08 16:46:13 oes -dnl Added --enable-no-gifs -dnl -dnl Revision 1.38 2002/03/08 14:13:50 morcego -dnl Fixing configure, to remove a command not found error. -dnl -dnl Revision 1.37 2002/03/08 12:58:21 oes -dnl Tiny bugfix in AC_ARG_WITH(debug) -dnl -dnl Revision 1.36 2002/03/06 23:50:36 morcego -dnl Will not test for a text browser if we are not using docbook. -dnl -dnl Revision 1.35 2002/03/06 21:55:52 morcego -dnl New configure option: --with-docbook=(yes|no|directory) -dnl Preliminary new platform detection code included. Will work with the -dnl old one for now. No use just trowing it away -dnl -dnl Revision 1.34 2002/03/06 20:57:00 morcego -dnl Fixing detection of stylesheets on SuSe. -dnl -dnl Revision 1.33 2002/03/05 17:31:11 morcego -dnl Search for docbook.dsl. Should solve portability problems for SuSe. -dnl -dnl Revision 1.32 2002/03/05 14:07:43 morcego -dnl configure now detects rpm topdir, and change GNUmakefile acordingly -dnl (based on sugestion by Sarantis Paskalis) -dnl -dnl Revision 1.31 2002/03/05 13:43:28 morcego -dnl Checking for text browser, so redhat-dok can work. -dnl -dnl Revision 1.30 2002/03/04 17:58:01 oes -dnl Deleted _DEBUG and PID_FILE_PATH -dnl -dnl Revision 1.29 2002/02/28 14:20:53 oes -dnl Fixed detection of gethost*_r functions on Solaris -dnl -dnl Revision 1.28 2002/02/27 15:02:38 oes -dnl Incremented version number -dnl -dnl Revision 1.27 2002/01/10 12:35:18 oes -dnl Added cross-compile defaults to the AC_CHECK_SIZEOF macros -dnl to silence autoconf warnings. Numbers are for Intel/Linux. -dnl Is there a better way? -dnl -dnl Revision 1.26 2002/01/09 14:29:49 oes -dnl - Added AC_CHECK_FUNC tests for the availability of -dnl gethostbyname_r, gethostbyaddr_r, gmtime_r and -dnl localtime_r, as well as AC_TRY_COMPILE tests to -dnl determine their signatures. -dnl -dnl - Fixed a bug with the init of CFLAGS that was -dnl reported by barsnick -dnl -dnl Revision 1.25 2002/01/04 15:27:18 oes -dnl Changed quoting of CODE_STATUS for use in make -dnl -dnl Revision 1.24 2001/12/30 14:07:31 steudten -dnl - Add signal handling (unix) -dnl - Add SIGHUP handler (unix) -dnl - Add creation of pidfile (unix) -dnl - Add action 'top' in rc file (RH) -dnl - Add entry 'SIGNALS' to manpage -dnl - Add exit message to logfile (unix) -dnl -dnl Revision 1.23 2001/12/09 20:24:42 david__schmidt -dnl Change from "alpha" to "beta" in configure.in -dnl -dnl Revision 1.22 2001/12/01 11:24:01 jongfoster -dnl Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of -dnl make break in a more obvious way. -dnl -dnl Revision 1.21 2001/11/30 21:35:54 jongfoster -dnl Bumping version number to 2.9.10 -dnl -dnl Revision 1.20 2001/10/23 21:24:09 jongfoster -dnl Support for FEATURE_CGI_EDIT_ACTIONS -dnl -dnl Revision 1.19 2001/10/07 15:33:14 oes -dnl Removed FEATURE_DENY_GZIP -dnl Bumped up version number -dnl -dnl Revision 1.18 2001/09/13 13:10:24 steudten -dnl -dnl PreWork for Debug Interface. -dnl Add new option "--with-debug" to enable debugging (flags aso.) -dnl -dnl Revision 1.17 2001/09/12 23:44:55 david__schmidt -dnl Mac OSX (Darwin) support added. -dnl -dnl Revision 1.16 2001/09/12 22:55:45 joergs -dnl AmigaOS support added. -dnl -dnl Revision 1.15 2001/09/12 17:28:59 david__schmidt -dnl -dnl OS/2 port: update autoconf'd support for the platform. -dnl -dnl Revision 1.14 2001/07/30 22:12:11 jongfoster -dnl Fixing Solaris build (I hope) and tidying up #defines: -dnl - All feature #defines are now of the form FEATURE_xxx -dnl - Permanently turned off WIN_GUI_EDIT -dnl - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS -dnl -dnl Revision 1.13 2001/07/29 17:09:17 jongfoster -dnl Major changes to build system in order to fix these bugs: -dnl - pthreads under Linux was broken - changed -lpthread to -pthread -dnl - Compiling in MinGW32 mode under CygWin now correctly detects -dnl which shared libraries are available -dnl - Solaris support (?) (Not tested under Solaris yet) -dnl -dnl Revision 1.12 2001/07/25 19:16:27 oes -dnl Bumping version number to 2.9.8 -dnl -dnl Revision 1.11 2001/07/21 18:00:07 jongfoster -dnl Bumping version number to 2.9.7 -dnl -dnl Revision 1.10 2001/07/18 17:25:04 oes -dnl Fixed a typo -dnl -dnl Revision 1.9 2001/07/15 19:45:13 jongfoster -dnl Added support for linking with POSIX threads library -dnl -dnl Revision 1.8 2001/07/15 17:54:29 jongfoster -dnl Renaming #define STATIC to STATIC_PCRE -dnl Adding new #define FEATURE_PTHREAD that will be used to enable -dnl POSIX threads support. -dnl -dnl Revision 1.7 2001/07/13 13:58:05 oes -dnl Completely reorganized the selection scheme for -dnl pcre, pcreposix, pcrs and gnu_regex: -dnl -dnl The presence of shared pcre, pcreposix or pcrs -dnl libraried is now autodetected. Additionally, the -dnl user can enforce using the built-in static variants -dnl by specifying --disable-dynamic-(pcre|pcrs). -dnl Care is taken to avoid that pcre is dyn, while pcreposix -dnl is static, if both are used and that pcrs is static if -dnl pcrs is. -dnl -dnl The choice between pcre, gnu or no regex for actionsfile -dnl URL matching is now via -dnl --(enable|disable)-regex-matching[=(gnu|pcre|no)] with the -dnl default being pcre. -dnl -dnl Revision 1.6 2001/06/29 21:56:40 oes -dnl Version -> 2.9.5 -dnl -dnl Revision 1.5 2001/06/29 13:26:27 oes -dnl Introduced #define CODE_STATUS -dnl -dnl Revision 1.4 2001/05/29 09:50:24 jongfoster -dnl Unified blocklist/imagelist/permissionslist. -dnl File format is still under discussion, but the internal changes -dnl are (mostly) done. -dnl -dnl Also modified interceptor behaviour: -dnl - We now intercept all URLs beginning with one of the following -dnl prefixes (and *only* these prefixes): -dnl * http://i.j.b/ -dnl * http://ijbswa.sf.net/config/ -dnl * http://ijbswa.sourceforge.net/config/ -dnl - New interceptors "home page" - go to http://i.j.b/ to see it. -dnl - Internal changes so that intercepted and fast redirect pages -dnl are not replaced with an image. -dnl - Interceptors now have the option to send a binary page direct -dnl to the client. (i.e. ijb-send-banner uses this) -dnl - Implemented show-url-info interceptor. (Which is why I needed -dnl the above interceptors changes - a typical URL is -dnl "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". -dnl The previous mechanism would not have intercepted that, and -dnl if it had been intercepted then it then it would have replaced -dnl it with an image.) -dnl -dnl Revision 1.3 2001/05/22 18:46:04 oes -dnl -dnl - Enabled filtering banners by size rather than URL -dnl by adding patterns that replace all standard banner -dnl sizes with the "Junkbuster" gif to the re_filterfile -dnl -dnl - Enabled filtering WebBugs by providing a pattern -dnl which kills all 1x1 images -dnl -dnl - Added support for PCRE_UNGREEDY behaviour to pcrs, -dnl which is selected by the (nonstandard and therefore -dnl capital) letter 'U' in the option string. -dnl It causes the quantifiers to be ungreedy by default. -dnl Appending a ? turns back to greedy (!). -dnl -dnl - Added a new interceptor ijb-send-banner, which -dnl sends back the "Junkbuster" gif. Without imagelist or -dnl MSIE detection support, or if tinygif = 1, or the -dnl URL isn't recognized as an imageurl, a lame HTML -dnl explanation is sent instead. -dnl -dnl - Added new feature, which permits blocking remote -dnl script redirects and firing back a local redirect -dnl to the browser. -dnl The feature is conditionally compiled, i.e. it -dnl can be disabled with --disable-fast-redirects, -dnl plus it must be activated by a "fast-redirects" -dnl line in the config file, has its own log level -dnl and of course wants to be displayed by show-proxy-args -dnl Note: Boy, all the #ifdefs in 1001 locations and -dnl all the fumbling with configure.in and acconfig.h -dnl were *way* more work than the feature itself :-( -dnl -dnl - Because a generic redirect template was needed for -dnl this, tinygif = 3 now uses the same. -dnl -dnl - Moved GIFs, and other static HTTP response templates -dnl to project.h -dnl -dnl - Some minor fixes -dnl -dnl - Removed some >400 CRs again (Jon, you really worked -dnl a lot! ;-) -dnl -dnl Revision 1.2 2001/05/20 01:21:20 jongfoster -dnl Version 2.9.4 checkin. -dnl - Merged popupfile and cookiefile, and added control over PCRS -dnl filtering, in new "permissionsfile". -dnl - Implemented LOG_LEVEL_FATAL, so that if there is a configuration -dnl file error you now get a message box (in the Win32 GUI) rather -dnl than the program exiting with no explanation. -dnl - Made killpopup use the PCRS MIME-type checking and HTTP-header -dnl skipping. -dnl - Removed tabs from "config" -dnl - Moved duplicated url parsing code in "loaders.c" to a new funcition. -dnl - Bumped up version number. -dnl -dnl Revision 1.1.1.1 2001/05/15 13:58:50 oes -dnl Initial import of version 2.9.3 source tree -dnl -dnl - - -dnl ================================================================= -dnl AutoConf Initialization -dnl ================================================================= - -AC_REVISION($Revision: 1.126 $) -AC_INIT(jcc.c) - -if test ! -f config.h.in; then - echo "You need to run autoheader first. " - echo -n "Shall I do this for you now? (y/n) " - read answer - if test "$answer" != "y"; then - exit 1 - else - autoheader - fi -fi - -AC_CONFIG_HEADER([config.h]) -AC_CANONICAL_HOST - -dodk=auto -DKPREFIX=none -AC_ARG_WITH(docbook, dnl - --with-docbook=[[yes|no|directory]] - Enable docbook documentation creation - (default = yes, for gnu and linux),[dnl -case "$with_docbook" in -yes) dodk=yes;; -no) dodk=no;; -*) - dodk=yes - DKPREFIX=$withval - ;; -esac -]) -DB2HTML=false -AC_ARG_WITH(db2html, dnl - --with-db2html=<path/executable> - Set the location of the docbook to html converter - (default = search),[dnl -DB2HTML=$withval -]) - -dnl ================================================================= -dnl Application version number -dnl ================================================================= - -VERSION_MAJOR=3 -VERSION_MINOR=0 -VERSION_POINT=12 -CODE_STATUS="stable" - -dnl CODE_STATUS can be "alpha", "beta", or "stable", and will be -dnl used for CGI output. Set version to 0.0.0 and status to "UNRELEASED" -dnl whenever CVS in a stable branch differs from the last release. - -dnl ================================================================= -dnl Substitute the version numbers -dnl ================================================================= - -AC_SUBST(VERSION_MAJOR) -AC_SUBST(VERSION_MINOR) -AC_SUBST(VERSION_POINT) -AC_SUBST(CODE_STATUS) - -dnl -AC_DEFINE_UNQUOTED(VERSION_MAJOR,${VERSION_MAJOR}) -AC_DEFINE_UNQUOTED(VERSION_MINOR,${VERSION_MINOR}) -AC_DEFINE_UNQUOTED(VERSION_POINT,${VERSION_POINT}) -AC_DEFINE_UNQUOTED(VERSION,"${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_POINT}") -AC_DEFINE_UNQUOTED(CODE_STATUS,"${CODE_STATUS}") - -dnl ================================================================= -dnl Checks for programs needed to build. -dnl ================================================================= - -dnl Keep AC_PROG_CC from setting its own defaults: -if test "X$CFLAGS" = "X"; then - CFLAGS=" " -fi - -AC_PROG_CC -AC_PROG_CPP -AC_PROG_INSTALL -AC_PROG_LN_S -AC_PROG_MAKE_SET -AC_PROG_AWK - -AC_CHECK_PROG(GDB,gdb,yes,no) -AC_PATH_PROG(BGROUPS,groups,no,/bin:/usr/bin:/usr/local/bin) -AC_PATH_PROG(ID,id,no,/bin:/usr/bin:/usr/local/bin) -AC_SUBST(ID) -AC_SUBST(BGROUPS) - -dnl ================================================================= -dnl debug, gcc and gdb support -dnl ================================================================= - -AC_ARG_WITH(debug, - [ --with-debug Enable debug mode], - [ - if test "x$withval" != "xno" ; then - if test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - if test "$GDB"; then - CFLAGS="$CFLAGS -ggdb" - else - CFLAGS="$CFLAGS -g" - fi - CFLAGS="$CFLAGS -Wshadow -Wconversion" - else - CFLAGS="$CFLAGS -g" - fi - fi - fi - ], - [ - if test "X$CFLAGS" = "X "; then # if CFLAGS were unset (see above) - if test "$GCC" = yes; then - CFLAGS="-O2" - fi - fi - ] -) - -dnl ================================================================= -dnl Check for user and group validity -dnl ================================================================= - - -if test "$EMXOS2" = yes; then - echo "Skipping user and group validity stuff."; - -else - - $ID privoxy >/dev/null 2>/dev/null - if test $? -ne 0 ; then - AC_MSG_WARN(There is no user 'privoxy' on this system) - fi - AC_MSG_CHECKING([for user]) - AC_ARG_WITH(user, - [ --with-user=privoxy Set user under which privoxy will run], - [ - if test "x$withval" != "xyes"; then - if test $ID = no ; then - AC_MSG_ERROR(There is no 'id' program on this system) - else - AC_MSG_RESULT($with_user) - $ID $with_user 2>/dev/null >/dev/null - if test $? -eq 0 ; then - USER=$with_user; - else - AC_MSG_ERROR(There is no user '$with_user' on this system) - fi - fi - else - AC_MSG_ERROR(We need a user if you give me this parameter) - fi - ], - [ - if test $ID = no ; then - AC_MSG_ERROR(There is no 'id' programm on this system) - else - AC_MSG_RESULT(none specified) - USER=$with_user - fi - ] - ) - AC_SUBST(USER) - - AC_MSG_CHECKING([for group]) - AC_ARG_WITH(group, - [ --with-group=privoxy Set group for privoxy], - [ - if test "x$withval" != "xyes"; then - if test $BGROUPS = no ; then - AC_MSG_ERROR(There is no 'groups' program on this system) - else - AC_MSG_RESULT($with_group) - $BGROUPS $USER >/dev/null - if test $? -eq 0 ; then - # FIXME: this fails if valid group, but not first group - # listed. - if test "$with_group" != "`$BGROUPS $USER | sed 's/.*: //' 2>/dev/null |$AWK '{print $1}'`" ; then - AC_MSG_ERROR(The given value '$withval' does not match group entry) - else - GROUP=$with_group; - fi - else - AC_MSG_ERROR(There is no group entry for user '$USER') - fi - fi - else - AC_MSG_ERROR(We need a group if you give me this parameter) - fi - ], - [ - if test $BGROUPS = no ; then - AC_MSG_ERROR(There is no 'groups' programm on this system) - else - AC_MSG_RESULT(none specified) - GROUP=$with_group; - fi - ] - ) - AC_SUBST(GROUP) - -fi - -dnl ================================================================= -dnl additional gcc flags -dnl ================================================================= -dnl -if test "$GCC"; then - if test "$host" != "powerpc-unknown-amigaos"; then - CFLAGS="-pipe $CFLAGS" - fi -fi - - -dnl ================================================================= -dnl Build type -dnl ================================================================= -dnl -dnl Must do this first. -dnl -dnl Reason: This sets CFLAGS in order to switch the Cygwin compiler -dnl into Cygwin or MinGW32 modes. Depending on the mode selected, -dnl the compiler will use completely different sets of library -dnl and include files. -dnl -dnl ================================================================= - -AC_MINGW32 -AC_CYGWIN - -if test "$MINGW32" = "yes"; then - target_type=mingw -else - if test "$CYGWIN" = "yes"; then - target_type=cygwin - else - target_type=unix - fi -fi - -if test $dodk = auto; then - dodk=no - if test $target_type = unix; then - case "$host_os" in - linux* | gnu*) - dodk=yes - ;; - esac - fi -fi - -dnl Decide what to do based on target_type -dnl Note: PTHREAD_LIB is always set, even if pthread is disabled. -dnl This is because we don't know yet whether pthread is enabled. - -AC_ARG_ENABLE(mingw32, -[ --enable-mingw32 Use mingw32 for a Windows GUI], -[if test $enableval = yes; then - target_type=mingw -fi]) - -if test $target_type = mingw; then - WIN_ONLY= - SPECIAL_CFLAGS="-mwindows -mno-cygwin" - PTHREAD_LIB=-lpthreadGC - echo "Using mingw32 (Win32 GUI)" -else - WIN_ONLY=# - if test $target_type = cygwin; then - SPECIAL_CFLAGS="-mno-win32" - PTHREAD_LIB= - echo "Using Cygnus (Win32 command line)" - else - SPECIAL_CFLAGS= -dnl PTHREAD_LIB=-lpthread - fi -fi -AC_SUBST(WIN_ONLY) - -dnl Checking which text html browser we have avaliable -if test $dodk != no; then - AC_CHECK_PROGS(WDUMP,w3m lynx links,false) - if test "$WDUMP" = false; then - AC_MSG_WARN(You need some kind of text browser to build documentation $w3m, lynx and links are supported$) - fi - if test $DB2HTML = false; then - dnl We need to clean the variable, otherwise AC_CHECK_PROGS - dnl will fail - DB2HTML="" - AC_CHECK_PROGS(DB2HTML,db2html docbook2html,false) - fi -fi -AC_SUBST(WDUMP) -AC_SUBST(DB2HTML) - -dnl If we use rpm, we need to check where %_topdir is -AC_CHECK_PROGS(RPMBIN,rpm,false) -if test $RPMBIN != false; then - RPM_BASE=`rpm --eval "%{_topdir}"` - if test "$RPM_BASE" = ""; then - RPM_BASE=/usr/src/redhat - fi -fi -AC_SUBST(RPM_BASE) - -dnl Check for jade, so we can build the documentation -AC_CHECK_PROGS(JADEBIN,jade openjade,false) -AC_SUBST(JADEBIN) - -dnl Check for man2html for docs. -AC_CHECK_PROGS(MAN2HTML,man2html,false) -AC_SUBST(MAN2HTML) - -dnl Set doc status flag for conditional content inclusions -DOC_STATUS=p-not-stable -if test $CODE_STATUS = stable; then - DOC_STATUS="p-stable" -fi -AC_SUBST(DOC_STATUS) - -dnl Checking for the docbook.dsl stylesheet file -dnl It is still not portable (directory slash) -JADECAT="" -if test $dodk = yes; then - if test $DKPREFIX = none; then - for i in /usr/share/sgml/docbook/dsssl-stylesheets \ - /usr/share/sgml/docbkdsl /usr/share/sgml/docbook-dsssl \ - /usr/local/share/sgml/docbook/dsssl/modular \ - /usr/share/sgml/docbook/stylesheet/dsssl/modular/ \ - ; do -dnl echo -n does not fly with /bin/sh. -dnl echo -n "checking for $i/html/docbook.dsl..." - AC_MSG_CHECKING([for $i]) - if test -f $i/html/docbook.dsl; then - echo "yes" - DKPREFIX=$i - break - else - echo "no" - fi - done -# where are the catalogs? - for i in /usr/share/sgml/CATALOG.docbk30 \ - /usr/share/sgml/CATALOG.docbk31 \ - /usr/share/sgml/CATALOG.docbk31 \ - /usr/local/share/sgml/docbook/3.0/docbook.cat \ - /usr/local/share/sgml/docbook/3.1/docbook.cat \ - /usr/share/sgml/docbook/dtd/3.1/docbook.cat \ - ; do -dnl echo -n "checking for $i..." - AC_MSG_CHECKING([for $i]) - if test -f $i; then - echo "yes" - JADECAT="$JADECAT -c $i" - else - echo "no" - fi - done - fi -fi -AC_SUBST(JADECAT) -AC_SUBST(DKPREFIX) - -dnl Save old CFLAGS so we can restore them later, then add SPECIAL_CFLAGS -old_CFLAGS_nospecial=$CFLAGS -CFLAGS="$CFLAGS $SPECIAL_CFLAGS" - -# Hack to force AutoConf to use the CFLAGS we just set -dnl Warning: This may break with a future version of Autoconf -dnl Tested with autoconf 2.13 -ac_cpp='$CPP $CPPFLAGS $SPECIAL_CFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - -dnl ================================================================= -dnl Thread support -dnl ================================================================= - -AC_CHECK_HEADER(pthread.h, [have_pthread=yes], [have_pthread=no]) - -AC_ARG_ENABLE(pthread, -[ --disable-pthread Don't use POSIX threads (pthreads)], -[if test $enableval = no; then - # Disable pthreads - if test $have_pthread = yes; then - AC_MSG_WARN([pthreads seem to be available but you are using --disable-pthread.]) - AC_MSG_WARN([This is almost always a mistake and can render Privoxy unacceptable slow.]) - fi - have_pthread=no -fi]) - -if test $have_pthread = yes; then - PTHREAD_ONLY= - AC_DEFINE(FEATURE_PTHREAD) - echo Using POSIX threads - if test "$GCC" = "yes"; then - # Set a GCC specific switch: - if test "$target_type" = "unix"; then - ac_jgf_save_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -pthread" - AC_TRY_LINK([#include <pthread.h>], - [void *p = pthread_create;], - [ - # This compiler switch makes GCC on Linux thread-safe - # However, it's not supported on most other OS. - PTHREAD_LIB= - SPECIAL_CFLAGS="-pthread" - ]) - CFLAGS=$ac_jgf_save_CFLAGS - fi - fi -else - PTHREAD_ONLY=# - echo Using native threads -fi - -AC_SUBST(PTHREAD_ONLY) - -dnl ================================================================= -dnl Support for thread-safe versions of gethostbyaddr, gethostbyname, -dnl gmtime and localtime -dnl ================================================================= - -dnl Next line needed to find the gethost*_r functions on Solaris -AC_CHECK_LIB(nsl, gethostbyname) - -AC_CHECK_FUNC(gethostbyaddr_r, [ - AC_MSG_CHECKING([signature of gethostbyaddr_r]) - AC_TRY_COMPILE([ -# include <netdb.h> - ], [ - struct hostent *h, *hp; - char *a, *b; - int l, bl, t, e; - (void) gethostbyaddr_r(a, l, t, h, b, bl, &hp, &e) - ], [ - AC_DEFINE(HAVE_GETHOSTBYADDR_R_8_ARGS) - AC_MSG_RESULT([8 args]) - ], [ - AC_TRY_COMPILE([ -# include <netdb.h> - ], [ - struct hostent *h; - char *a, *b; - int l, bl, t, e; - (void) gethostbyaddr_r(a, l, t, h, b, bl, &e) - ], [ - AC_DEFINE(HAVE_GETHOSTBYADDR_R_7_ARGS) - AC_MSG_RESULT([7 args]) - ], [ - AC_TRY_COMPILE([ -# include <netdb.h> - ], [ - struct hostent_data *d; - struct hostent *h; - char a, - int l, t; - (void) gethostbyaddr_r(a, l, t, h, d) - ], [ - AC_DEFINE(HAVE_GETHOSTBYADDR_R_5_ARGS) - AC_MSG_RESULT([5 args]) - ], [ - AC_MSG_RESULT(unrecognised) - ]) - ]) - ]) -], [ - AC_MSG_RESULT(no) -]) - -AC_CHECK_FUNC(gethostbyname_r, [ - AC_MSG_CHECKING([signature of gethostbyname_r]) - AC_TRY_COMPILE([ -# include <netdb.h> - ], [ - struct hostent *h, *r; - char *n, *b; - int bl, e; - (void) gethostbyname_r(n, h, b, bl, &r, &e) - ], [ - AC_DEFINE(HAVE_GETHOSTBYNAME_R_6_ARGS) - AC_MSG_RESULT([6 args]) - ], [ - AC_TRY_COMPILE([ -# include <netdb.h> - ], [ - struct hostent *h; - char *n, *b; - int bl, e; - (void) gethostbyname_r(n, h, b, bl, &e) - ], [ - AC_DEFINE(HAVE_GETHOSTBYNAME_R_5_ARGS) - AC_MSG_RESULT([5 args]) - ], [ - AC_TRY_COMPILE([ -# include <netdb.h> - ], [ - struct hostent_data *d; - struct hostent *h; - char *n, - (void) gethostbyname_r(n, h, d) - ], [ - AC_DEFINE(HAVE_GETHOSTBYNAME_R_3_ARGS) - AC_MSG_RESULT([3 args]) - ], [ - AC_MSG_RESULT(unrecognised) - ]) - ]) - ]) -], [ - AC_MSG_RESULT(no) -]) - -AC_CHECK_FUNC(gmtime_r, [ - AC_MSG_CHECKING([signature of gmtime_r]) - AC_TRY_COMPILE([ -# include <time.h> - ], [ - struct time *t; - struct tm *tm; - (void) gmtime_r(t, tm) - ], [ - AC_MSG_RESULT(ok) - AC_DEFINE(HAVE_GMTIME_R) - ], [ - AC_MSG_RESULT(unrecognised) - ]) -], [ - AC_MSG_RESULT(no) -]) - -AC_CHECK_FUNC(localtime_r, [ - AC_MSG_CHECKING([signature of localtime_r]) - AC_TRY_COMPILE([ -# include <time.h> - ], [ - struct time *t; - struct tm *tm; - (void) localtime_r(t, tm) - ], [ - AC_MSG_RESULT(ok) - AC_DEFINE(HAVE_LOCALTIME_R) - ], [ - AC_MSG_RESULT(unrecognised) - ]) -], [ - AC_MSG_RESULT(no) -]) - -dnl ================================================================= -dnl Solaris specific -dnl FIXME: Not tested on Solaris yet... -dnl ISFIXED: Have tested it on Solaris, but there are other ways to -dnl make these checks generic, e.g.: -dnl AC_CHECK_FUNC(getsockopt, , AC_CHECK_LIB(socket, getsockopt)) -dnl (Moritz Barsnick <moritz(a)barsnick.net>) -dnl ================================================================= - - -SOCKET_LIB= - -case "$host" in -*-solaris*) SOCKET_LIB="-lsocket -lnsl" - AC_DEFINE(__EXTENSIONS__) - if test "$GCC" = "yes"; then - # Set a GCC specific switch: - # This compiler switch makes Solaris thread-safe - PTHREAD_LIB= - SPECIAL_CFLAGS="-pthreads" - else - # What do we do without GCC? Guess this: - SPECIAL_CFLAGS="-D_REENTRANT" - fi -;; -esac - -AC_SUBST(SOCKET_LIB) - -dnl ================================================================= -dnl Solaris problem, and others perhaps (socklen_t is undefined) -dnl ================================================================= - -AC_MSG_CHECKING([for socklen_t]) -AC_EGREP_HEADER(socklen_t, sys/socket.h, AC_MSG_RESULT([yes]), - AC_MSG_RESULT([no]) - AC_DEFINE(socklen_t,int, - [ Define to 'int' if <sys/socket.h> doesn't have it. ])) - - -dnl ================================================================= -dnl OS/2 specific -dnl ================================================================= - -case "$host" in -*-os2-emx*) SOCKET_LIB=-lsocket -;; -esac - -AC_SUBST(SOCKET_LIB) - -dnl ================================================================= -dnl Mac OSX specific -dnl ================================================================= - -case "$host" in -*-apple-darwin*) SPECIAL_CFLAGS="-Dunix" -;; -esac - -dnl ================================================================= -dnl OpenBSD specific -dnl ================================================================= - -case "$host" in -*-openbsd*) SPECIAL_CFLAGS="$SPECIAL_CFLAGS -Dunix" -;; -esac - -dnl ================================================================= -dnl AmigaOS specific -dnl ================================================================= - -AMIGAOS_ONLY=# - -case "$host" in -*-amigaos) AMIGAOS_ONLY= -;; -esac - -AC_SUBST(AMIGAOS_ONLY) - -dnl ================================================================= -dnl Check for standard compiler stuff -dnl ================================================================= - -AC_EXEEXT -AC_OBJEXT -AC_HEADER_STDC -AC_HEADER_DIRENT -AC_C_CONST -AC_TYPE_SIZE_T -AC_TYPE_PID_T -AC_HEADER_TIME -AC_STRUCT_TM -AC_CHECK_SIZEOF(int, 4) -AC_CHECK_SIZEOF(char *, 4) -AC_CHECK_SIZEOF(long, 4) -AC_CHECK_SIZEOF(long long, 8) -AC_CHECK_SIZEOF(size_t, 4) - -dnl Checks for header files. -dnl AC_HEADER_SYS_WAIT -dnl AC_CHECK_HEADERS(fcntl.h limits.h malloc.h sys/time.h unistd.h) -AC_CHECK_HEADERS([OS.h arpa/inet.h errno.h fcntl.h limits.h locale.h netdb.h netinet/in.h stddef.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h sys/timeb.h sys/wait.h unistd.h]) - -dnl Checks for library functions. -dnl AC_TYPE_SIGNAL -dnl AC_CHECK_FUNC(strstr) -dnl bcopy and memmove are for PCRE -AC_CHECK_FUNCS([strerror bcopy memmove]) -AC_PROG_GCC_TRADITIONAL -dnl uncommenting does not work for swa. suse linux -dnl AC_FUNC_MALLOC -AC_FUNC_SETPGRP -AC_TYPE_SIGNAL -dnl uncommenting does not work for swa. suse linux -dnl AC_FUNC_STAT -AC_CHECK_FUNCS([access atexit getcwd gethostbyaddr gethostbyaddr_r gethostbyname gethostbyname_r gettimeofday inet_ntoa localtime_r memchr memmove memset poll putenv random regcomp select setlocale snprintf socket strchr strdup strerror strftime strlcat strlcpy strptime strstr strtoul timegm tzset]) - - -dnl ================================================================= -dnl Checks for libraries. -dnl ================================================================= -dnl Note: Some systems may have the library but not the system header -dnl file, so we must check for both. -dnl Also check for correct version -AC_CHECK_LIB(pcre, pcre_compile, [ - AC_CHECK_HEADER(pcre.h, [ - AC_EGREP_HEADER(pcre_fullinfo, pcre.h, [have_pcre=yes], [AC_MSG_WARN([[pcre old version installed]]); have_pcre=no]) - ], [ - AC_CHECK_HEADER(pcre/pcre.h, [ - AC_EGREP_HEADER(pcre_fullinfo, pcre/pcre.h, [have_pcre=yes]; [AC_DEFINE(PCRE_H_IN_SUBDIR)], [AC_MSG_WARN([[pcre old version installed]]); have_pcre=no]) - ], [have_pcre=no]) - ]) -], [have_pcre=no]) - -AC_CHECK_LIB(pcreposix, regcomp, [ - AC_CHECK_HEADER(pcreposix.h, [ - AC_EGREP_HEADER(pcreposix_regerror, pcreposix.h, [AC_MSG_WARN([[pcreposix old version installed]]); have_pcreposix=no], [have_pcreposix=yes]) - ], [ - AC_CHECK_HEADER(pcre/pcreposix.h, [ - AC_EGREP_HEADER(pcreposix_regerror, pcre/pcreposix.h, [AC_MSG_WARN([[pcreposix old version installed]]); have_pcreposix=no], [have_pcreposix=yes]; [AC_DEFINE(PCREPOSIX_H_IN_SUBDIR)]) - ], [have_pcreposix=no]) - ]) -], [have_pcreposix=no], -lpcre) - -dnl ================================================================ -dnl libpcrs is temporarily disabled. -dnl -dnl Privoxy's own pcrs version fixes some problems that -dnl are present in libpcrs 0.3, the last pcrs release we -dnl know of, and as libpcrs seems to be currently unmaintained -dnl we can't send these fixes upstream. -dnl ================================================================ -dnl -dnl AC_CHECK_LIB(pcrs, pcrs_compile, [AC_CHECK_HEADER(pcrs.h, [have_pcrs=yes], [have_pcrs=no])], [have_pcrs=no], -lpcre) - -dnl ================================================================= -dnl Always defined -dnl ================================================================= - -AC_DEFINE(__MT__) - -dnl ================================================================= -dnl Features -dnl ================================================================= - -AC_ARG_ENABLE(toggle, -[ --disable-toggle Don't support temporary disable], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_TOGGLE) -fi],AC_DEFINE(FEATURE_TOGGLE)) - -AC_ARG_ENABLE(force, -[ --disable-force Don't allow single-page disable], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_FORCE_LOAD) -fi],AC_DEFINE(FEATURE_FORCE_LOAD)) - -AC_ARG_ENABLE(fast-redirects, -[ --disable-fast-redirects Don't support fast redirects], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_FAST_REDIRECTS) -fi], AC_DEFINE(FEATURE_FAST_REDIRECTS)) - -AC_ARG_ENABLE(stats, -[ --disable-stats Don't keep statistics], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_STATISTICS) -fi],AC_DEFINE(FEATURE_STATISTICS)) - -AC_ARG_ENABLE(ie-images, -[ --enable-ie-images Enable a quick but not always reliable auto-detect whether requests from - MS Internet Explorer are for an image or not.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_IMAGE_DETECT_MSIE) -fi],) - -AC_ARG_ENABLE(image-blocking, -[ --disable-image-blocking Don't try to figure out whether a request is - for an image or HTML - assume HTML.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_IMAGE_BLOCKING) -fi], -AC_DEFINE(FEATURE_IMAGE_BLOCKING)) - -AC_ARG_ENABLE(acl-files, -[ --disable-acl-files Prevents the use of ACL files to control access to - Privoxy by IP address.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_ACL) -fi], -AC_DEFINE(FEATURE_ACL)) - -AC_ARG_ENABLE(trust-files, -[ --disable-trust-files Prevents the use of trust files.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_TRUST) -fi], -AC_DEFINE(FEATURE_TRUST)) - -AC_ARG_ENABLE(editor, -[ --disable-editor Prevents the use of the web-based actions file - editor and web-based temporary disable setting.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_CGI_EDIT_ACTIONS) -fi], -AC_DEFINE(FEATURE_CGI_EDIT_ACTIONS)) - -AC_ARG_ENABLE(no-gifs, -[ --enable-no-gifs Use politically correct PNG format instead of GIF - for built-in images. May not work with all browsers.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_NO_GIFS) -fi]) - -AC_ARG_ENABLE(graceful-termination, -[ --enable-graceful-termination Allow to shutdown Privoxy through the webinterface.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_GRACEFUL_TERMINATION) -fi]) - -AC_ARG_ENABLE(extended-host-patterns, -[ --enable-extended-host-patterns Allow extended regular expressions in host patterns.], -[if test $enableval = yes; then - AC_DEFINE(FEATURE_EXTENDED_HOST_PATTERNS) -fi]) - -dnl pcre/pcrs is needed for CGI anyway, so -dnl the choice is only between static and -dnl dynamic: - -AC_ARG_ENABLE(dynamic-pcre, -[ --disable-dynamic-pcre Use the built-in, static pcre, even if libpcre is available], -[ if test $enableval = "no"; then have_pcre=no; fi ]) - -dnl ================================================= -dnl libpcrs is temporarily disabled, -dnl see comment above for the reason. -dnl ================================================= -dnl AC_ARG_ENABLE(dynamic-pcrs, -dnl [ --disable-dynamic-pcrs Use the built-in, static pcrs, even if libpcrs is available], -dnl [ if test $enableval = "no"; then have_pcrs=no; fi ]) - - -dnl ==================================================== -dnl This check is incomplete. For mingw32 zlib is found -dnl by configure, but not necessarily by the compiler. -dnl ==================================================== -AC_ARG_ENABLE(zlib, -[ --disable-zlib Don't use zlib to decompress data before filtering.], -[enableval2=$enableval], -[enableval2=yes]) -if test $enableval2 = yes; then - AC_CHECK_LIB(z, zlibVersion, [have_zlib="yes"], [have_zlib="no"]) - if test $have_zlib = "yes"; then - LIBS="$LIBS -lz" - AC_DEFINE(FEATURE_ZLIB,1,[Define to 1 to use compression through the zlib library.]) - else - AC_MSG_WARN([No zlib found. - Privoxy will not be able to filter compressed content. - This may become a fatal error in the future.]) - fi -fi - - -# If we have libpcre and either we also have pcreposix or -# we don't need pcreposix, then link pcre dynamically; else -# build it and link statically -# -if test $have_pcre = "yes"; then - echo "using libpcre" - pcre_dyn=yes - STATIC_PCRE_ONLY=# - LIBS="$LIBS -lpcre -lpcreposix" -else - AC_MSG_WARN([You are using the static PCRE code which is scheduled for removal, for details see: - https://sourceforge.net/mailarchive/message.php?msg_id=20080511195555.2dc6c…] - pcre_dyn=no - AC_DEFINE(STATIC_PCRE) - STATIC_PCRE_ONLY= -fi - -if test $have_pthread = "yes" -o $target_type = "mingw"; then - echo Enabling keep-alive support for outgoing connections. - AC_DEFINE(FEATURE_CONNECTION_KEEP_ALIVE) -fi - -dnl ================================================= -dnl libpcrs is temporarily disabled, -dnl see comment above for the reason. -dnl ================================================= -dnl # If we have libpcrs and pcre is linked dynamically -dnl # then also link pcrs dynamically, else build and link -dnl # pcrs statically -dnl -dnl if test $have_pcrs = "yes" -a $pcre_dyn = "yes"; then -dnl echo "using libpcrs" -dnl STATIC_PCRS_ONLY=# -dnl LIBS="$LIBS -lpcrs" -dnl else -dnl echo "using built-in static pcrs" - AC_DEFINE(STATIC_PCRS) - STATIC_PCRS_ONLY= -dnl fi - -AC_SUBST(STATIC_PCRE_ONLY) -AC_SUBST(STATIC_PCRS_ONLY) - -dnl ================================================================= -dnl Final cleanup and output -dnl ================================================================= - -dnl Remove the SPECIAL_CFLAGS stuff from CFLAGS, and add it seperately -dnl in the Makefile -CFLAGS=$old_CFLAGS_nospecial -AC_SUBST(SPECIAL_CFLAGS) - -AC_SUBST(PTHREAD_LIB) - -AC_OUTPUT(GNUmakefile doc/source/ldp.dsl) diff --git a/external/privoxy/cygwin.h b/external/privoxy/cygwin.h deleted file mode 100644 index 526f8d0..0000000 --- a/external/privoxy/cygwin.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef CYGWIN_H_INCLUDED -#define CYGWIN_H_INCLUDED -#define CYGWIN_H_VERSION "$Id: cygwin.h,v 1.6 2006/07/18 14:48:45 david__schmidt Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/cygwin.h,v $ - * - * Purpose : The windows.h file seems to be a *tad* different, so I - * will bridge the gaps here. Perhaps I should convert the - * latest SDK too? Shudder, I think not. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: cygwin.h,v $ - * Revision 1.6 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.4 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.3 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.2 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.1.1.1 2001/05/15 13:58:51 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - -/* Conditionally include this whole file. */ -#ifdef __MINGW32__ - -/* Hmmm, seems to be overlooked. */ -#define _RICHEDIT_VER 0x0300 - -/* - * Named slightly different ... but not in Cygwin v1.3.1 ... - * - * #define LVITEM LV_ITEM - * #define LVCOLUMN LV_COLUMN - */ - -#endif /* def __MINGW32__ */ -#endif /* ndef CYGWIN_H_INCLUDED */ - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/deanimate.c b/external/privoxy/deanimate.c deleted file mode 100644 index 01fc97c..0000000 --- a/external/privoxy/deanimate.c +++ /dev/null @@ -1,554 +0,0 @@ -const char deanimate_rcs[] = "$Id: deanimate.c,v 1.19 2008/05/21 15:29:35 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/deanimate.c,v $ - * - * Purpose : Declares functions to manipulate binary images on the - * fly. High-level functions include: - * - Deanimation of GIF images - * - * Functions declared include: gif_deanimate, buf_free, - * buf_copy, buf_getbyte, gif_skip_data_block - * and gif_extract_image - * - * Copyright : Written by and Copyright (C) 2001 - 2004, 2006 by the - * SourceForge Privoxy team. http://www.privoxy.org/ - * - * Based on the GIF file format specification (see - * http://tronche.com/computer-graphics/gif/gif89a.html) - * and ideas from the Image::DeAnim Perl module by - * Ken MacFarlane, <ksm+cpan(a)universal.dca.net> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: deanimate.c,v $ - * Revision 1.19 2008/05/21 15:29:35 fabiankeil - * Fix gcc43 warnings. - * - * Revision 1.18 2008/03/28 15:13:38 fabiankeil - * Remove inspect-jpegs action. - * - * Revision 1.17 2007/08/05 13:42:22 fabiankeil - * #1763173 from Stefan Huehner: declare some more functions static. - * - * Revision 1.16 2007/07/14 08:01:58 fabiankeil - * s@failiure@failure@ - * - * Revision 1.15 2007/01/03 14:39:19 fabiankeil - * Fix a gcc43 warning and mark the binbuffer - * as immutable for buf_getbyte(). - * - * Revision 1.14 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.12.2.1 2004/10/03 12:53:32 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.12 2002/05/12 21:36:29 jongfoster - * Correcting function comments - * - * Revision 1.11 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.10 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.9 2002/03/13 00:27:04 jongfoster - * Killing warnings - * - * Revision 1.8 2002/03/09 19:42:47 jongfoster - * Fixing more warnings - * - * Revision 1.7 2002/03/08 17:46:04 jongfoster - * Fixing int/size_t warnings - * - * Revision 1.6 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.5 2001/09/10 10:16:06 oes - * Silenced compiler warnings - * - * Revision 1.4 2001/07/18 12:28:49 oes - * - Added feature for extracting the first frame - * to gif_deanimate - * - Separated image buffer extension into buf_extend - * - Extended gif deanimation to GIF87a (untested!) - * - Cosmetics - * - * Revision 1.3 2001/07/15 13:57:50 jongfoster - * Adding #includes string.h and miscutil.h - * - * Revision 1.2 2001/07/13 13:46:20 oes - * Introduced GIF deanimation feature - * - * - **********************************************************************/ - - -#include "config.h" - -#include <string.h> -#include <fcntl.h> - -#include "errlog.h" -#include "project.h" -#include "deanimate.h" -#include "miscutil.h" - -const char deanimate_h_rcs[] = DEANIMATE_H_VERSION; - -/********************************************************************* - * - * Function : buf_free - * - * Description : Safely frees a struct binbuffer - * - * Parameters : - * 1 : buf = Pointer to the binbuffer to be freed - * - * Returns : N/A - * - *********************************************************************/ -void buf_free(struct binbuffer *buf) -{ - if (buf == NULL) return; - - if (buf->buffer != NULL) - { - free(buf->buffer); - } - - free(buf); - -} - - -/********************************************************************* - * - * Function : buf_extend - * - * Description : Ensure that a given binbuffer can hold a given amount - * of bytes, by reallocating its buffer if necessary. - * Allocate new mem in chunks of 1024 bytes, so we don't - * have to realloc() too often. - * - * Parameters : - * 1 : buf = Pointer to the binbuffer - * 2 : length = Desired minimum size - * - * - * Returns : 0 on success, 1 on failure. - * - *********************************************************************/ -static int buf_extend(struct binbuffer *buf, size_t length) -{ - char *newbuf; - - if (buf->offset + length > buf->size) - { - buf->size = ((buf->size + length + (size_t)1023) & ~(size_t)1023); - newbuf = (char *)realloc(buf->buffer, buf->size); - - if (newbuf == NULL) - { - freez(buf->buffer); - return 1; - } - else - { - buf->buffer = newbuf; - return 0; - } - } - return 0; - -} - - -/********************************************************************* - * - * Function : buf_copy - * - * Description : Safely copies a given amount of bytes from one - * struct binbuffer to another, advancing the - * offsets appropriately. - * - * Parameters : - * 1 : src = Pointer to the source binbuffer - * 2 : dst = Pointer to the destination binbuffer - * 3 : length = Number of bytes to be copied - * - * Returns : 0 on success, 1 on failure. - * - *********************************************************************/ -static int buf_copy(struct binbuffer *src, struct binbuffer *dst, size_t length) -{ - - /* - * Sanity check: Can't copy more data than we have - */ - if (src->offset + length > src->size) - { - return 1; - } - - /* - * Ensure that dst can hold the new data - */ - if (buf_extend(dst, length)) - { - return 1; - } - - /* - * Now that it's safe, memcpy() the desired amount of - * data from src to dst and adjust the offsets - */ - memcpy(dst->buffer + dst->offset, src->buffer + src->offset, length); - src->offset += length; - dst->offset += length; - - return 0; - -} - - -/********************************************************************* - * - * Function : buf_getbyte - * - * Description : Safely gets a byte from a given binbuffer at a - * given offset - * - * Parameters : - * 1 : src = Pointer to the source binbuffer - * 2 : offset = Offset to the desired byte - * - * Returns : The byte on success, or 0 on failure - * - *********************************************************************/ -static unsigned char buf_getbyte(const struct binbuffer *src, size_t offset) -{ - if (src->offset + offset < src->size) - { - return (unsigned char)*(src->buffer + src->offset + offset); - } - else - { - return '\0'; - } - -} - - -/********************************************************************* - * - * Function : gif_skip_data_block - * - * Description : Safely advances the offset of a given struct binbuffer - * that contains a GIF image and whose offset is - * positioned at the start of a data block, behind - * that block. - * - * Parameters : - * 1 : buf = Pointer to the binbuffer - * - * Returns : 0 on success, or 1 on failure - * - *********************************************************************/ -static int gif_skip_data_block(struct binbuffer *buf) -{ - unsigned char c; - - /* - * Data blocks are sequences of chunks, which are headed - * by a one-byte length field, with the last chunk having - * zero length. - */ - while((c = buf_getbyte(buf, 0)) != '\0') - { - buf->offset += (size_t)c + 1; - if (buf->offset >= buf->size - 1) - { - return 1; - } - } - buf->offset++; - - return 0; - -} - - -/********************************************************************* - * - * Function : gif_extract_image - * - * Description : Safely extracts an image data block from a given - * struct binbuffer that contains a GIF image and whose - * offset is positioned at the start of a data block - * into a given destination binbuffer. - * - * Parameters : - * 1 : src = Pointer to the source binbuffer - * 2 : dst = Pointer to the destination binbuffer - * - * Returns : 0 on success, or 1 on failure - * - *********************************************************************/ -static int gif_extract_image(struct binbuffer *src, struct binbuffer *dst) -{ - unsigned char c; - - /* - * Remember the colormap flag and copy the image head - */ - c = buf_getbyte(src, 9); - if (buf_copy(src, dst, 10)) - { - return 1; - } - - /* - * If the image has a local colormap, copy it. - */ - if (c & 0x80) - { - int map_length = 3 * (1 << ((c & 0x07) + 1)); - if (map_length <= 0) - { - log_error(LOG_LEVEL_DEANIMATE, - "colormap length = %d (%c)?", map_length, c); - return 1; - } - if (buf_copy(src, dst, (size_t)map_length)) - { - return 1; - } - } - if (buf_copy(src, dst, 1)) return 1; - - /* - * Copy the image chunk by chunk. - */ - while((c = buf_getbyte(src, 0)) != '\0') - { - if (buf_copy(src, dst, 1 + (size_t) c)) return 1; - } - if (buf_copy(src, dst, 1)) return 1; - - /* - * Trim and rewind the dst buffer - */ - if (NULL == (dst->buffer = (char *)realloc(dst->buffer, dst->offset))) return 1; - dst->size = dst->offset; - dst->offset = 0; - - return(0); - -} - -/********************************************************************* - * - * Function : gif_deanimate - * - * Description : Deanimate a given GIF image, i.e. given a GIF with - * an (optional) image block and an arbitrary number - * of image extension blocks, produce an output GIF with - * only one image block that contains the last image - * (extenstion) block of the original. - * Also strip Comments, Application extenstions, etc. - * - * Parameters : - * 1 : src = Pointer to the source binbuffer - * 2 : dst = Pointer to the destination binbuffer - * 3 : get_first_image = Flag: If set, get the first image - * If unset (default), get the last - * - * Returns : 0 on success, or 1 on failure - * - *********************************************************************/ -int gif_deanimate(struct binbuffer *src, struct binbuffer *dst, int get_first_image) -{ - unsigned char c; - struct binbuffer *image; - - if (NULL == src || NULL == dst) - { - return 1; - } - - c = buf_getbyte(src, 10); - - /* - * Check & copy GIF header - */ - if (strncmp(src->buffer, "GIF89a", 6) && strncmp(src->buffer, "GIF87a", 6)) - { - return 1; - } - else - { - if (buf_copy(src, dst, 13)) - { - return 1; - } - } - - /* - * Look for global colormap and copy if found. - */ - if(c & 0x80) - { - int map_length = 3 * (1 << ((c & 0x07) + 1)); - if (map_length <= 0) - { - log_error(LOG_LEVEL_DEANIMATE, - "colormap length = %d (%c)?", map_length, c); - return 1; - } - if (buf_copy(src, dst, (size_t)map_length)) - { - return 1; - } - } - - /* - * Reserve a buffer for the current image block - */ - if (NULL == (image = (struct binbuffer *)zalloc(sizeof(*image)))) - { - return 1; - } - - /* - * Parse the GIF block by block and copy the relevant - * parts to dst - */ - while(src->offset < src->size) - { - switch(buf_getbyte(src, 0)) - { - /* - * End-of-GIF Marker: Append current image and return - */ - case 0x3b: - goto write; - - /* - * Image block: Extract to current image buffer. - */ - case 0x2c: - image->offset = 0; - if (gif_extract_image(src, image)) goto failed; - if (get_first_image) goto write; - continue; - - /* - * Extension block: Look at next byte and decide - */ - case 0x21: - switch (buf_getbyte(src, 1)) - { - /* - * Image extension: Copy extension header and image - * to the current image buffer - */ - case 0xf9: - image->offset = 0; - if (buf_copy(src, image, 8) || buf_getbyte(src, 0) != 0x2c) goto failed; - if (gif_extract_image(src, image)) goto failed; - if (get_first_image) goto write; - continue; - - /* - * Application extension: Skip - */ - case 0xff: - if ((src->offset += 14) >= src->size || gif_skip_data_block(src)) goto failed; - continue; - - /* - * Comment extension: Skip - */ - case 0xfe: - if ((src->offset += 2) >= src->size || gif_skip_data_block(src)) goto failed; - continue; - - /* - * Plain text extension: Skip - */ - case 0x01: - if ((src->offset += 15) >= src->size || gif_skip_data_block(src)) goto failed; - continue; - - /* - * Ooops, what type of extension is that? - */ - default: - goto failed; - - } - - /* - * Ooops, what type of block is that? - */ - default: - goto failed; - - } - } /* -END- while src */ - - /* - * Either we got here by goto, or because the GIF is - * bogus and EOF was reached before an end-of-gif marker - * was found. - */ - -failed: - buf_free(image); - return 1; - - /* - * Append the current image to dst and return - */ - -write: - if (buf_copy(image, dst, image->size)) goto failed; - if (buf_extend(dst, 1)) goto failed; - *(dst->buffer + dst->offset++) = 0x3b; - buf_free(image); - return 0; - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/deanimate.h b/external/privoxy/deanimate.h deleted file mode 100644 index 53af6f1..0000000 --- a/external/privoxy/deanimate.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef DEANIMATE_H_INCLUDED -#define DEANIMATE_H_INCLUDED -#define DEANIMATE_H_VERSION "$Id: deanimate.h,v 1.12 2008/03/28 15:13:39 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/deanimate.h,v $ - * - * Purpose : Declares functions to manipulate binary images on the - * fly. High-level functions include: - * - Deanimation of GIF images - * - * Functions declared include: gif_deanimate and buf_free. - * - * - * Copyright : Written by and Copyright (C) 2001 - 2004 by the the - * SourceForge Privoxy team. http://www.privoxy.org/ - * - * Based on ideas from the Image::DeAnim Perl module by - * Ken MacFarlane, <ksm+cpan(a)universal.dca.net> - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: deanimate.h,v $ - * Revision 1.12 2008/03/28 15:13:39 fabiankeil - * Remove inspect-jpegs action. - * - * Revision 1.11 2007/01/12 15:41:00 fabiankeil - * Remove some white space at EOL. - * - * Revision 1.10 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.8.2.1 2004/10/03 12:53:32 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.8 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.7 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.6 2002/03/08 17:46:04 jongfoster - * Fixing int/size_t warnings - * - * Revision 1.5 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.4 2001/07/29 18:50:04 jongfoster - * Fixing "extern C" block, and renaming #define _DEANIMATE_H - * - * Revision 1.3 2001/07/18 12:29:05 oes - * Updated prototype for gif_deanimate - * - * Revision 1.2 2001/07/13 13:46:20 oes - * Introduced GIF deanimation feature - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * A struct that holds a buffer, a read/write offset, - * and the buffer's capacity. - */ -struct binbuffer -{ - char *buffer; - size_t offset; - size_t size; -}; - -/* - * Function prototypes - */ -extern int gif_deanimate(struct binbuffer *src, struct binbuffer *dst, int get_first_image); -extern void buf_free(struct binbuffer *buf); - -/* - * Revision control strings from this header and associated .c file - */ -extern const char deanimate_rcs[]; -extern const char deanimate_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef DEANIMATE_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/default.action.master b/external/privoxy/default.action.master deleted file mode 100644 index 81c4138..0000000 --- a/external/privoxy/default.action.master +++ /dev/null @@ -1,2162 +0,0 @@ -#MASTER# COMMENT: -#MASTER# COMMENT: Anyone adding specific rules to this file, -#MASTER# COMMENT: wherever possible please include a *full* URL -#MASTER# COMMENT: which can be used to verify the problem, and if -#MASTER# COMMENT: the problem may not always be fully obvious, a -#MASTER# COMMENT: brief explanation. Please also add tests for -#MASTER# COMMENT: Privoxy-Regression-Test so we can automatically -#MASTER# COMMENT: verify that your rules are effective. Thanks. -#MASTER# COMMENT: -###################################################################### -# -# File : $Source: /cvsroot/ijbswa/current/default.action.master,v $ -# -# $Id: default.action.master,v 1.170 2009/03/04 15:05:00 ler762 Exp $ -# -# Requires : This version requires Privoxy v3.0.11 or later due to -# syntax changes. -# -# Purpose : Default actions file, see -# http://www.privoxy.org/user-manual/actions-file.html. -# This file is subject to periodic updating. It is -# not supposed to be edited by the user. Local exceptions -# and enhancements are better placed in user.action, -# the match-all section has been moved to match-all.action. -# -# Copyright : Written by and Copyright (C) 2001-2009 the -# Privoxy team. http://www.privoxy.org/ -# -# Note: Updated versions of this file will be made available from time -# to time. Check http://sourceforge.net/project/showfiles.php?group_id=11118 -# for updates and/or subscribe to the announce mailing list -# (http://lists.sourceforge.net/lists/listinfo/ijbswa-announce) if you -# wish to receive an email notice whenever updates are released. -# -# We value your feedback. However, to provide you with the best support, -# please note: -# -# * Use the support forum to get help: -# http://sourceforge.net/tracker/?group_id=11118&atid=211118 -# * Submit feedback for this actions file only through the -# SF actions file feedback tracker: -# http://sourceforge.net/tracker/?group_id=11118&atid=460288 -# * Submit bugs only through our bug forum: -# http://sourceforge.net/tracker/?group_id=11118&atid=111118 -# Make sure that the bug has not already been submitted. Please try -# to verify that it is a Privoxy bug, and not a browser or site -# bug first. If you are using your own custom configuration, please -# try the stock configs to see if the problem is a configuration -# related bug. And if possible please try the latest CVS sources. -# * Submit feature requests only through our feature request forum: -# http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse -# -# For any other issues, feel free to use the mailing lists: -# http://sourceforge.net/mail/?group_id=11118 -# -# Anyone interested in actively participating in development and related -# discussions can join the appropriate mailing list here: -# http://sourceforge.net/mail/?group_id=11118. Archives are available -# here too. -# -# The current development version of this file is located: -# http://ijbswa.cvs.sourceforge.net/*checkout*/ijbswa/current/default.action.… -# -############################################################################# -# Syntax -############################################################################# -# -# A much better explanation can be found in the user manual which is -# part of the distribution and can be found at http://www.privoxy.org/user-manual -# -# To determine which actions apply to a request, the URL of the request is -# compared to all patterns in this file. Every time it matches, the list of -# applicable actions for this URL is incrementally updated. You can trace -# this process by visiting http://config.privoxy.org/show-url-info -# -# There are 4 types of lines in this file: comments (like this line), -# actions, aliases and patterns, all of which are explained below. -# -############################################################################# -# Pattern Syntax -############################################################################# -# -# 1. On Domains and Paths -# ----------------------- -# -# Generally, a pattern has the form <domain>/<path>, where both the <domain> -# and <path> part are optional. The pattern matching syntax is different for -# each. If you only specify a domain part, the "/" can be left out, but it is -# required for the path part. -# -# www.example.com -# is a domain-only pattern and will match any request to www.example.com -# -# www.example.com/ -# means exactly the same (but is slightly less efficient) -# -# www.example.com/index.html -# matches only the document /index.html on www.example.com -# -# /index.html -# matches the document /index.html, regardless of the domain -# -# index.html -# matches nothing, since it would be interpreted as a domain name and -# there is no top-level domain called ".html". -# -# 2. Domain Syntax -# ---------------- -# -# The matching of the domain part offers some flexible options: If the -# domain starts or ends with a dot, it becomes unanchored at that end: -# -# www.example.com -# matches only www.example.com -# -# .example.com -# matches any domain that ENDS in .example.com -# -# www. -# matches any domain that STARTS with www. -# -# .example. -# matches any domain that CONTAINS example -# -# -# Additionally, there are wildcards that you can use in the domain names -# themselves. They work pretty similar to shell wildcards: "*" stands for -# zero or more arbitrary characters, "?" stands for one, and you can define -# character classes in square brackets and they can be freely mixed: -# -# ad*.example.com -# matches adserver.example.com, ads.example.com, etc but not sfads.example.com -# -# *ad*.example.com -# matches all of the above -# -# .?pix.com -# matches www.ipix.com, pictures.epix.com, a.b.c.d.e.upix.com etc -# -# www[1-9a-ez].example.com -# matches www1.example.com, www4.example.com, wwwd.example.com, -# wwwz.example.com etc, but not wwww.example.com -# -# You get the idea? -# -# 2. Path Syntax -# -------------- -# -# Paths are specified as full regular expressions, and are more flexible than -# the domain syntax above. A comprehensive discussion of regular expressions -# wouldn't fit here. -# -# Perl compatible regular expressions are used. See the pcre/docs/ direcory or -# man perlre (also available at http://perldoc.perl.org/perlre.html) for -# details. The appendix to our User Manual also has some detail. -# -# Please note that matching in the path is CASE INSENSITIVE by default, but -# you can switch to case sensitive by starting the pattern with the "(?-i)" -# switch: -# -# www.example.com/(?-i)PaTtErN.* -# will match only documents whose path starts with PaTtErN in exactly this -# capitalization. -# -# Partially case-sensitive and partially case-insensitive patterns are -# possible, but the rules about splitting them up are extremely complex -# - see the PCRE documentation for more information. -# -############################################################################# -# Action Syntax -############################################################################# -# -# There are 3 kinds of actions: -# -# Boolean (e.g. "handle-as-image"): -# +name # enable -# -name # disable -# -# Parameterized (e.g. "hide-user-agent"): -# +name{param} # enable and set parameter to "param" -# -name # disable -# -# Multi-value (e.g. "add-header", "filter"): -# +name{param} # enable and add parameter "param" -# -name{param} # remove the parameter "param" -# -name # disable totally -# -# The default (if you don't specify anything in this file) is not to take -# any actions - i.e completely disabled, so Privoxy will just be a -# normal, non-blocking, non-anonymizing proxy. You must specifically -# enable the privacy and blocking features you need (although the -# provided default actions file will do that for you). -# -# Later actions always override earlier ones. For multi-valued actions, -# the actions are applied in the order they are specified. -# -############################################################################# -# Valid actions are: -############################################################################# -# -# +add-header{Name: value} -# Adds the specified HTTP header, which is not checked for validity. -# You may specify this many times to specify many headers. -# -# +block{reason} -# Block this URL. Instead of forwarding the request, Privoxy will -# send a "block" page containing the specified reason. -# -# +change-x-forwarded-for{add} -# +change-x-forwarded-for{block} -# Adds or blocks the "X-Forwarded-For:" HTTP header in client -# requests. -# -# +client-header-filter{name} -# All client headers to which this action applies are filtered on-the-fly -# through the specified regular expression based substitutions. -# -# Client-header filters predefined in the supplied default.filter include: -# -# hide-tor-exit-notation: Removes the Tor exit node notation in Host and Referer headers. -# privoxy-control: Removes X-Privoxy-Control headers. -# -# +client-header-tagger{string} -# Tag requests based on their headers. Client headers to which this -# action applies are filtered on-the-fly through the specified regular -# expression based substitutions, the result is used as a tag. -# Client-header taggers are the first actions that are executed and their -# tags can be used to control every other action. -# -# Client-header taggers predefined in the supplied default.filter include: -# -# image-requests: Tags detected image requests as "IMAGE-REQUEST". -# css-requests: Tags detected CSS requests as "CSS-REQUEST". -# client-ip-address: Tags the request with the client's IP address. -# http-method: Tags the request with its HTTP method. -# allow-post: Tags POST requests as "ALLOWED-POST". -# complete-url: Tags the request with the whole request URL. -# user-agent: Tags the request with the complete User-Agent header. -# privoxy-control: Creates tags with the content of X-Privoxy-Control headers. -# -# +content-type-overwrite -# Replaces the "Content-Type:" HTTP server header, so that unwanted -# download menus will not pop up, or changes the browser's rendering mode. -# -# +crunch-client-header{string} -# Deletes every header sent by the client that contains the string the -# user supplied as parameter. -# -# +crunch-if-none-match -# Deletes the "If-None-Match:" HTTP client header. -# -# +crunch-server-header{string} -# Deletes every header sent by the server that contains the string the -# user supplied as a parameter. -# -# +deanimate-gifs{last} -# +deanimate-gifs{first} -# Deanimate all animated GIF images, i.e. reduce them to their last -# frame. This will also shrink the images considerably. (In bytes, -# not pixels!) -# If the option "first" is given, the first frame of the animation -# is used as the replacement. If "last" is given, the last frame of -# the animation is used instead, which propably makes more sense for -# most banner animations, but also has the risk of not showing the -# entire last frame (if it is only a delta to an earlier frame). -# -# +downgrade-http-version -# Downgrade HTTP/1.1 client requests to HTTP/1.0 and downgrade the -# responses as well. Use this action for servers that use HTTP/1.1 -# protocol features that Privoxy currently can't handle yet. -# -# +fast-redirects{check-decoded-url} -# +fast-redirects{simple-check} -# Many sites, like yahoo.com, don't just link to other sites. -# Instead, they will link to some script on their own server, -# giving the destination as a parameter, which will then redirect -# you to the final target. -# -# URLs resulting from this scheme typically look like: -# http://some.place/some_script?http://some.where-else -# -# Sometimes, there are even multiple consecutive redirects encoded -# in the URL. These redirections via scripts make your web browsing -# more traceable, since the server from which you follow such a link -# can see where you go to. Apart from that, valuable bandwidth and -# time is wasted, while your browser asks the server for one redirect -# after the other. Plus, it feeds the advertisers. -# -# The +fast-redirects{check-decoded-url} option enables interception of -# these requests by Privoxy, who will cut off all but the last valid URL -# in the request and send a local redirect back to your browser without -# contacting the intermediate sites. NOTE: Syntax change as of v.3.0.4. -# -# +filter{name} -# All files of text-based type, most notably HTML and JavaScript, to which -# this action applies, can be filtered on-the-fly through the specified -# regular expression based substitutions. (Note: plain text documents are -# exempted from filtering, because web servers often use the text/plain -# MIME type for all files whose type they don't know.) By default, -# filtering works only on the raw document content itself (that which can -# be seen with View Source), not the headers. Repeat for multiple filters. -# Use with caution: filters can be very intrusive. -# -# Filters predefined in the supplied default.filter include: -# -# js-annoyances: Get rid of particularly annoying JavaScript abuse. -# js-events: Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites). -# html-annoyances: Get rid of particularly annoying HTML abuse. -# content-cookies: Kill cookies that come in the HTML or JS content. -# refresh-tags: Kill automatic refresh tags (for dial-on-demand setups). -# unsolicited-popups: Disable only unsolicited pop-up windows. -# all-popups: Kill all popups in JavaScript and HTML. -# img-reorder: Reorder attributes in <img> tags to make the banners-by-* filters more effective. -# banners-by-size: Kill banners by size. -# banners-by-link: Kill banners by their links to known clicktrackers. -# webbugs: Squish WebBugs (1x1 invisible GIFs used for user tracking). -# tiny-textforms: Extend those tiny textareas up to 40x80 and kill the hard wrap. -# jumping-windows: Prevent windows from resizing and moving themselves. -# frameset-borders: Give frames a border and make them resizable. -# demoronizer: Fix MS's non-standard use of standard charsets. -# shockwave-flash: Kill embedded Shockwave Flash objects. -# quicktime-kioskmode: Make Quicktime movies saveable. -# fun: Text replacements for subversive browsing fun! -# crude-parental: Crude parental filtering. Note that this filter doesn't work reliably. -# ie-exploits: Disable some known Internet Explorer bug exploits. -# site-specifics: Cure for site-specific problems. Don't apply generally! -# no-ping: Removes non-standard ping attributes in <a> and <area> tags. -# google: CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement. -# yahoo: CSS-based block for Yahoo text ads. Also removes a width limitation. -# msn: CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation. -# blogspot: Cleans up some Blogspot blogs. Read the fine print before using this. -# -# +force-text-mode -# Declares a document as plain text, even if the "Content-Type:" isn't detected -# as such. -# -# +forward-override{forward .} -# +forward-override{forward 127.0.0.1:8123} -# +forward-override{forward-socks4a 127.0.0.1:9050 .} -# +forward-override{forward-socks4a 127.0.0.1:9050 proxy.example.org:8000} -# +forward-override{forward-socks5 127.0.0.1:9050 .} -# +forward-override{forward-socks5 127.0.0.1:9050 proxy.example.org:8000} -# This action overrules the forward directives in the configuration file. -# -# +handle-as-empty-document -# This action alone doesn't do anything noticeable. It just marks URLs. If -# the block action also applies, the presence or absence of this mark -# decides whether an HTML "blocked" page, or an empty document will be sent -# to the client as a substitute for the blocked content. -# -# +handle-as-image -# Treat this URL as an image. This only matters if it's also "+block"ed, -# in which case a "blocked" image can be sent rather than a HTML page. -# See +set-image-blocker{} for the control over what is actually sent. -# -# +hide-accept-language{lang} -# +hide-accept-language{block} -# Deletes or replaces the "Accept-Language:" HTTP header in client -# requests. -# -# +hide-content-disposition{block} -# +hide-content-disposition{string} -# Deletes or replaces the "Content-Disposition:" HTTP header set by some -# servers. This can be used to prevent download menus for content you -# prefer to view inside the browser, for example. -# -# +hide-from-header{block} -# +hide-from-header{spam(a)sittingduck.xqq} -# If the browser sends a "From:" header containing your e-mail address, -# either completely removes the header ("block"), or change it to the -# specified e-mail address. -# -# +hide-if-modified-since{block} -# +hide-if-modified-since{-60} -# Deletes the "If-Modified-Since:" HTTP client header or modifies its -# value, preventing another way to track users. -# -# +hide-referer{block} -# +hide-referer{forge} -# +hide-referer{http://nowhere.com} -# Don't send the "Referer:" (sic) header to the web site. You can -# block it, forge a URL to the same server as the request (which is -# preferred because some sites will not send images otherwise) or -# set it to a constant string. -# -# +hide-referrer{...} -# Alternative spelling of +hide-referer. Has the same parameters, -# and can be freely mixed with, "+hide-referer". ("referrer" is the -# correct English spelling, however the HTTP specification has a -# bug - it requires it to be spelt "referer"). -# -# +hide-user-agent{browser-type} -# Change the "User-Agent:" header so web servers can't tell your -# browser type. (Breaks many web sites). Specify the user-agent -# value you want - e.g., to pretend to be using Netscape on Linux: -# +hide-user-agent{Mozilla (X11; I; Linux 2.0.32 i586)} -# Or to identify yourself explicitly as a Privoxy user: -# +hide-user-agent{Privoxy/1.0} -# (Don't change the version number from 1.0 - after all, why tell them?) -# -# +limit-connect{portlist} -# -# By default, i.e. if no limit-connect action applies, Privoxy -# allows HTTP CONNECT requests to all ports. Use limit-connect -# if fine-grained control is desired for some or all destinations. -# The CONNECT methods exists in HTTP to allow access to secure websites -# ("https://" URLs) through proxies. It works very simply: the proxy -# connects to the server on the specified port, and then short-circuits -# its connections to the client and to the remote server. This means -# CONNECT-enabled proxies can be used as TCP relays very easily. Privoxy -# relays HTTPS traffic without seeing the decoded content. Websites can -# leverage this limitation to circumvent Privoxy's filters. By specifying -# an invalid port range you can disable HTTPS entirely. -# -# +limit-connect{443} # Only port 443 is OK. -# +limit-connect{80,443} # Ports 80 and 443 are OK. -# +limit-connect{-3, 7, 20-100, 500-} # Ports less than 3, 7, 20 to 100 and above 500 are OK. -# +limit-connect{-} # All ports are OK -# +limit-connect{,} # No HTTPS/SSL traffic is allowed -# -# +overwrite-last-modified{block} -# +overwrite-last-modified{reset-to-request-time} -# +overwrite-last-modified{randomize} -# Removing the "Last-Modified:" header is useful for filter testing, where -# you want to force a real reload instead of getting status code "304", -# which would cause the browser to reuse the old version of the page. -# -# The "randomize" option overwrites the value of the "Last-Modified:" -# header with a randomly chosen time between the original value and the -# current time. In theory the server could send each document with a -# different "Last-Modified:" header to track visits without using cookies. -# "Randomize" makes it impossible and the browser can still revalidate -# cached documents. -# -# "reset-to-request-time" overwrites the value of the "Last-Modified:" -# header with the current time. You could use this option together with -# hide-if-modified-since to further customize your random range. -# -# +prevent-compression -# Prevent the website from compressing the data. Some websites do -# that, which is a problem for Privoxy when built without zlib support, -# since +filter and +gif-deanimate will not work on compressed data. -# Will slow down connections to those websites, though. -# -# +server-header-filter{name} -# All server headers to which this action applies are filtered on-the-fly -# through the specified regular expression based substitutions. -# -# Server-header filters predefined in the supplied default.filter include: -# -# x-httpd-php-to-html: Changes the Content-Type header from x-httpd-php to html. -# html-to-xml: Changes the Content-Type header from html to xml. -# xml-to-html: Changes the Content-Type header from xml to html. -# less-download-windows: Prevent annoying download windows for content types the browser can handle itself. -# privoxy-control: Removes X-Privoxy-Control headers. -# -# +server-header-tagger{content-type} -# Server headers to which this action applies are filtered on-the-fly -# through the specified regular expression based substitutions, the result -# is used as a tag. Server-header taggers are executed before all other -# header actions that modify server headers. Their tags can be used to -# control all of the other server-header actions, the content filters and -# the crunch actions (redirect and block). -# -# Server-header taggers predefined in the supplied default.filter include: -# -# content-type: Tags the request with the content type declared by the server. -# privoxy-control: Creates tags with the content of X-Privoxy-Control headers. -# -# +session-cookies-only -# If the website sets cookies, make sure they are erased when you exit -# and restart your web browser. This makes profiling cookies useless, -# but won't break sites which require cookies so that you can log in -# or for transactions. -# -# +set-image-blocker{blank} -# +set-image-blocker{pattern} -# +set-image-blocker{<URL>} with <url> being any valid image URL -# Decides what to do with URLs that end up tagged with {+block +handle-as-image}. -# There are 4 options: -# * "-set-image-blocker" will send a HTML "blocked" page, usually -# resulting in a "broken image" icon. -# * "+set-image-blocker{blank}" will send a 1x1 transparent image -# * "+set-image-blocker{pattern}" will send a 4x4 grey/white pattern -# which is less intrusive than the logo but easier to recognize -# than the transparent one. -# * "+set-image-blocker{<URL>}" will send a HTTP temporary redirect -# to the specified image URL. -# -# -# +crunch-outgoing-cookies -# Prevent the website from reading cookies -# -# +crunch-incoming-cookies -# Prevent the website from setting cookies -# -# +redirect{<URL>} -# +redirect{<pcrs command>} -# Convinces the browser that the requested document has been moved to -# another location and the browser should get it from the specified -# URL. -# -############################################################################# - -############################################################################# -# Settings -- Don't change. -############################################################################# -{{settings}} -############################################################################# -#MASTER# COMMENT: The minimum Privoxy version: -for-privoxy-version=3.0.11 - -############################################################################# -# Aliases -############################################################################# -{{alias}} -############################################################################# -# -# You can define a short form for a list of permissions - e.g., instead -# of "-crunch-incoming-cookies -crunch-outgoing-cookies -filter -fast-redirects", -# you can just write "shop". This is called an alias. -# -# Currently, an alias can contain any character except space, tab, '=', '{' -# or '}'. -# But please use only 'a'-'z', '0'-'9', '+', and '-'. -# -# Alias names are not case sensitive. -# -# Aliases beginning with '+' or '-' may be used for system action names -# in future releases - so try to avoid alias names like this. (e.g. -# "+crunch-all-cookies" below is not a good name) -# -# Aliases must be defined before they are used. -# - -# These aliases just save typing later: -# -+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies --crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies - allow-all-cookies = -crunch-all-cookies -session-cookies-only - allow-popups = -filter{all-popups} -filter{unsolicited-popups} -+block-as-image = +block{Blocked image request.} +handle-as-image --block-as-image = -block - -# These aliases define combinations of actions -# that are useful for certain types of sites: -# -fragile = -block -crunch-all-cookies -filter -fast-redirects -hide-referer -prevent-compression -shop = -crunch-all-cookies allow-popups - -# Your favourite blend of filters: -# -myfilters = +filter{html-annoyances} +filter{js-annoyances} +filter{all-popups}\ - +filter{webbugs} +filter{banners-by-size} - -# Allow ads for selected useful free sites: -# -allow-ads = -block -filter{banners-by-size} -filter{banners-by-link} - -################ -# -# Cautious settings -- safe for all sites, but offer little privacy protection -# -{ \ -+change-x-forwarded-for{block} \ -+hide-from-header{block} \ -+set-image-blocker{pattern} \ -} -standard.Cautious - -################ -# -# Medium settings -- safe for most sites, with reasonable protection/damage tradeoff -# -{ \ -+change-x-forwarded-for{block} \ -+deanimate-gifs{last} \ -+filter{refresh-tags} \ -+filter{img-reorder} \ -+filter{banners-by-size} \ -+filter{webbugs} \ -+filter{jumping-windows} \ -+filter{ie-exploits} \ -+hide-from-header{block} \ -+hide-referrer{conditional-block} \ -+session-cookies-only \ -+set-image-blocker{pattern} \ -} -standard.Medium - -################ -# -# Advanced settings -- reasonable privacy protection but -# require some exceptions for trusted sites, most likely -# because of cookies or SSL. Also testing ground for -# new options. -# -# CAUTION: These settings can still be subverted by a -# misconfigured client that executes code from untrusted -# sources. -# -{ \ -+change-x-forwarded-for{block} \ -+client-header-tagger{css-requests} \ -+client-header-tagger{image-requests} \ -+crunch-if-none-match \ -+crunch-outgoing-cookies \ -+crunch-incoming-cookies \ -+deanimate-gifs{last} \ -+fast-redirects{check-decoded-url} \ -+filter{html-annoyances} \ -+filter{content-cookies} \ -+filter{refresh-tags} \ -+filter{img-reorder} \ -+filter{banners-by-size} \ -+filter{banners-by-link} \ -+filter{webbugs} \ -+filter{jumping-windows} \ -+filter{frameset-borders} \ -+filter{quicktime-kioskmode} \ -+hide-if-modified-since{-60} \ -+hide-from-header{block} \ -+hide-referrer{conditional-block} \ -+limit-connect{,} \ -+overwrite-last-modified{randomize} \ -+set-image-blocker{pattern} \ -} -standard.Advanced - -############################################################################# -# These extensions belong to images: -############################################################################# -{+handle-as-image -filter} -############################################################################# -/.*\.(gif|jpe?g|png|bmp|ico)($|\?) - -############################################################################# -# These don't: -############################################################################# -{-handle-as-image} -/.*\.(js|php|css|.?html?) - -############################################################################# -# Generic block patterns by host: -############################################################################# -{+block{Host matches generic block pattern.}} -ad*. -.*ads. -#MASTER# REMARKS: removed .ad. 2007-12-18 HB -#MASTER# REMARKS: Modifications per Actionsfile feedback item #1807613 -.ad.?. -.ad.[a-ik-z][a-oq-z]. -.ad.jp.*. -.ad.???*. -# Blocked URL = http://alternativos.iw-advertising.com/ -.*advert*. -*banner*. -count*. -*counter. -#MASTER# PROBLEM URL: http://www.newegg.com -promotions. -#MASTER# BLOCK-REFERRER: http://tech.cybernetnews.com/ -# Blocked URL = http://metrics.performancing.com/ -metrics. - -############################################################################# -# Generic unblockers by host: -############################################################################# -{-block} -adsl. -ad[udmw]*. -adbl*. -adam*. -adapt*. -adob*. -adrenaline. -adtp*. -adv[oia]*. -adventure*. -.*road*. -.olympiad*. -.*load*. -.*[epu]ad*. -county*. -countr*. - -############################################################################# -# Generic block patterns by path: -############################################################################# -{+block{Path matches generic block pattern.}} -/(.*/)?ad(\?|/|s|v|_?(image|se?rv|box)|cycle|rotate|mentor|click|f[ra]m|script|stream|fetch|log|space) -# Blocked URL = http://www.example.org/adimage -# Blocked URL = http://www.example.org/adspace -/phpads(new)?/ -/(.*/)?(ad|all|nn|db|promo(tion)?)?[-_]?banner -/(.*/)?(publicite|werbung|rekla(me|am)|annonse|maino(kset|nta|s)?/) -/.*(count|track|compteur|(?<!relo)adframe|adse?rve?|banner)(er|run)?(\?|\.(pl|cgi|exe|dll|asp|php|cpt)) -/(.*/)?clicktrack -/(.*/)?(full)?pop[-_]?(up|over|under|open(er)?)?s?(/|\.) -/(.*/)?((flash)?pop|live(cnt|count(er)?)).*\.(js|php|cgi) - -############################################################################# -# Generic unblockers by path: -############################################################################# -{-block} -# Sticky Actions = -block -/.*ad(sl|v(i[cs]|o|an|ertencia|ent|.*search|erse)) # advice/advisories/advan*/advertencia (spanish) adverse -/.*(lo|thre|he|d|gr|l|ro|re|squ|class(ified)?)ads -/.*account -support./(.*/)?track - -############################################################################# -# Exceptions for academia and non-profits -############################################################################# -.edu -.ac.*/ -.uni-*.de -.tu-*.de -.gov -.hs-*.de -.fh-*.de -#MASTER# REMARKS: Try to avoid harmless names in non-commercial organizations. Added 10/24/06 -# URL = http://www.gnu.org/graphics/gnu-head-banner.png -.org/.*(image|banner) - -############################################################################# -# Catch-all for false-positives that are just TOO obvious to let go -############################################################################# -{+block{Catch-all block for false-positives.}} -#MASTER# REMARKS: Going for adsrv, adserve, adserver*. -.ads[erv][rv]*. -# Blocked URL = http://ads.facebook.com/ads/spreadshirt/banner120x600.jpg -.ads. -/(.*/)?ad(se?rv|click|stream|image|log|farm|script) -# Blocked URL = http://www.torrentportal.com/topad.html -#MASTER# REMARKS: Action tracker 1637648 and a bit of imagination. Added 2007-01-20. -#MASTER# REMARKS: Added "text" 20070730 as per http://www.pcworld.com/textad?Keywords=System Resources Tune-Up.&type=pcworld_downloads_search&count=3&ord=906010128&serveUrl=http%3A%2F%2Fwww.pcworld.com%2Fdownloads%2Ffile%2Ffid%2C7661-order%2C1-page%2C1-c%2Csystemresourcestuneup%2Fdescription.html Adam Piggott -/.*(top|bottom|left|right|text)_?ad - -############################################################################# -# Site-specific block patterns; -############################################################################# -{+block{Domain parking site}} -#MASTER# BLOCK-REFERRER: http://www.inetcat.org -# Blocked URL = http://www.sedoparking.com/www.inetcat.org -.sedoparking.com/ -# Blocked URL = http://landing.trafficz.com/index.php?domain=www.inetcat.org -landing.trafficz.com/ -# Blocked URL = http://www.searchnut.com/?domain=www.inetcat.org -.searchnut.com/\?domain - -{+block{Site-specific block pattern matches.}} -#MASTER# BLOCK-REFERRER: http://www.brooksbrothers.com/ 10/18/06 -#MASTER# BLOCK-REFERRER: http://www.autodesk.com/ -# Blocked URL = http://www.hitbox.com/foobar -.hitbox.com -#MASTER# BLOCK-REFERRER: http://www.the-gadgeteer.com/palmos.html 10/18/06 -# Blocked URL = http://www..the-gadgeteer.com/cgi-bin/getimage.cgi/ -.the-gadgeteer.com/cgi-bin/getimage.cgi/ -#MASTER# BLOCK-REFERRER: http://dest.travelocity.com/DestGuides/geo_frontdoor/0,,TRAVELOCITY,00.html… -# Blocked URL = http://dest.travelocity.com/website/destinations/images/partner_frommers.gif -# Blocked URL = http://dest.travelocity.com/website/destinations/images/travelex_logo.gif -dest.travelocity.com/website/destinations/images/partner_frommers.gif -dest.travelocity.com/website/destinations/images/travelex_logo.gif -#MASTER# BLOCK-REFERRER: http://us.imdb.com/Title?0110912 10/18/06 -#MASTER# BLOCK-REFERRER: http://www.imdb.com/help/boards/markup -#MASTER# REMARKS: 2nd is for emoticons exception -i.imdb.com/Photos/CMSIcons/(?!buttons|emoticons) -rcm.amazon.com -#MASTER# BLOCK-REFERRER: http://www.nytimes.com/ 10/18/06 -# Blocked URL = http://www.nytimes.com/adx/foo -.nytimes.com/adx/ -#MASTER# BLOCK-REFERRER: http://www.sharereactor.com/ 10/19/06 -#MASTER# BLOCK-REFERRER: http://www.popupad.net/ -#www.popupad.net/ats/ -.adtrak.net -.elitemediagroup.net -.popuptraffic.com -#MASTER# BLOCK-REFERRER: http://www.famousbabes.com/gabrielleR/grpics1.htm 10/19/06 -#MASTER# BLOCK-REFERRER: http://www.hit-now.com/ -.hit-now.com -#MASTER# BLOCK-REFERRER: http://www.pgpi.org/ 10/18/06 -[a-v]*.valueclick.com -#MASTER# BLOCK-REFERRER: http://astalavista.box.sk/ -#MASTER# REMARKS: Yea, all these at one site! 10/19/06 -.cpays.com -.oxado.com -.adult*finder.com -#MASTER# DONT-VERIFY: Opera's list of banners to load (XML) -/scripts/cms/xcms.asp -#MASTER# REMARKS: Actionsfile tracker 1559740 09/16/06 See http://www.vibrantmedia.com/whatisIntelliTXT.asp -#MASTER# BLOCK-REFERRER: http://www.hartware.de/news_40795.html -/.*intellitxt/ -.intellitxt.com -#MASTER# REMARKS: per Actions File tracker: #1597893 11/17/06, similar to intellitxt -.kontera.com -#MASTER# REMARKS: 2007-08-17 HB, similar to intellitxt -#MASTER# BLOCK-REFERRER: http://www.webhostingtalk.com/archive/index.php/t-533369.html -.tribalfusion.com/ctxt -#MASTER# REMARKS: Video advertizer, owned by doubleclick.net. -#MASTER# BLOCK-REFERRER: http://www.ign.com/ 09/17/06 -.klipmart.com -#MASTER# BLOCK-REFERRER: http://gamespot.com 09/26/06 -#MASTER# REMARKS: adlog.com.com and ads.com.com -ad*.com.com -#MASTER# REMARKS: used in redirects: dw.com.com 12/18/06 -#MASTER# BLOCK-REFERRER: http://verizon.net 09/29/06 -sales.liveperson.net -#MASTER# BLOCK-REFERRER: www.avclub.com/ 10/14/06 -.iad.liveperson.net -#MASTER# BLOCK-REFERRER: http://homedepot.com 09/29/06 -#MASTER# BLOCK-REFERRER: http://weather.com 11/03/06 -.coremetrics.com/ -#MASTER# BLOCK-REFERRER: http://wired.com 09/29/06 -.realmedia.com/data/ -#MASTER# REMARKS: webbugs, ads and user tracking js in many places. -#MASTER# BLOCK-REFERRER: http://washingtonpost.com & http://tomshardware.com 09/29/06 -.revsci.net -#MASTER# BLOCK-REFERRER: http://www.time.com/time/business/article/0,8599,1073341,00.html 09/29/06 -.clickability.com -/.*clickability(.com)?/ -#MASTER# BLOCK-REFERRER: http://washingtonpost.com 09/29/06 -stats.*.ihost.com -#MASTER# BLOCK-REFERRER: http://msnbc.com and many others 09/29/06 -.2o7.net -#MASTER# BLOCK-REFERRER: http://microsoft.com 09/29/06 -.webtrends.com -#MASTER# BLOCK-REFERRER: http://tomshardware.com 09/29/06 -.tacoda. -#MASTER# BLOCK-REFERRER: http://www.torrentazos.com 10/04/06 -ad.theadhost.com -#MASTER# BLOCK-REFERRER: http://www.stuff.co.nz 10/06/06 -.adbureau.net -#MASTER# BLOCK-REFERRER: http://drudgereport.com 10/06/06 -.adgardener.com -#MASTER# BLOCK-REFERRER: http://www.connected-media.com/riven/hints.htm 10/14/06 -#MASTER# REMARKS: ads.kw.revenue.net/? etc -.revenue.net -#MASTER# BLOCK-REFERRER: http://www.geocities.com/the_sockman1/index.html 10/15/06 -#MASTER# REMARKS: ..and any other page on geocities. Source of the obnoxious Geocities drop-in menu. -.geocities.com/js_source -#MASTER# BLOCK-REFERRER: http://www.google.com 09/28/06 -.dartsearch.net -#MASTER# BLOCK-REFERRER: http://wunderground.com 11/02/06 -.zedo.com -#MASTER# BLOCK-REFERRER: http://realtor.org 11/03/06 -.trk.sodoit.com/ -#MASTER# BLOCK-REFERRER: http://www.freenews.fr 11/23/06 Actionsfile feedback item #1597034 -.espace.netavenir.com -#MASTER# BLOCK-REFERRER: http://www.powerdvd.com/ 12/28/06 -.hitfarm.com -#MASTER# BLOCK-REFERRER: http://www.uk-businessdirectory.co.uk/ -#MASTER# REMARKS: Action tracker 1616457. Added 2007-01-20. -.topnemo.com/engine -.top100categories.com/engine -#MASTER# REMARKS: Actionsfile feedback item #1647852 2007-01-30 -#MASTER# REMARKS: Domain squatting onload pop-ups -#MASTER# BLOCK-REFERRER: http://www.memtest.com/ -/(t|search)\.php\?uid=ws[a-z0-9]+\.[a-z0-9]+ -#MASTER# BLOCK-REFERRER: via Yahoo groups -#MASTER# REMARKS: Actionsfile tracker 1645513 2007-01-26 -.adinterax.com/(?!(.*)\.(js|gif|jpg)) -#MASTER# BLOCK-REFERRER: http://www.weilpod.com -#MASTER# REMARKS: Actionsfile feedback item #1710951 2007-05-02 -img.bluehost.com -#MASTER# BLOCK-REFERRER: http://www.linuxinsider.com/story/57759.html -#MASTER# REMARKS: Actionsfile feedback item #1736213 at 2007-06-12 -linuxinsider.com/images/sda/ -#MASTER# REMARKS: 20070711 Adam Piggott Actionsfile feedback #1700692 -#MASTER# REMARKS: Tracking JavaScript -#MASTER# BLOCK-REFERRER: http://www.hants.gov.uk/record-office/ -[a-z].clickdensity.com -#MASTER# REMARKS: Obnoxious "widget" adverts -#MASTER# BLOCK-REFERRER: http://www.quickonlinetips.com/archives/2007/08/nokia-offers-free-bl-5c-bat… -.widgetbucks.com -#MASTER# BLOCK-REFERRER: http://www.dailymail.co.uk/pages/live/articles/news/news.html?in_article_id… -# Blocked URL = http://img.dailymail.co.uk/i/promo_boxes/groTime_promo.jpg -# Blocked URL = http://img.dailymail.co.uk/i/promo_boxes/idealhome_promo.gif -img.dailymail.co.uk/i/promo_boxes/ -#MASTER# REMARKS: Flash ad, Actionsfile feedback item #2003465 2008-07-01 -# Blocked URL = http://cache.opt.fimserve.com/contents/325/84/84325/LIN728x90.swf?%20%20%20… -.fimserve.com -#MASTER# REMARKS: Actionsfile feedback item #2004311 2008-07-01, are they all images? -# Blocked URL = http://static.lycos-europe.net/lea/se/pricerunner/040608_728x90_payback_dig… -static.lycos-europe.net -#MASTER# REMARKS: Actionsfile feedback item #2005285 -#MASTER# BLOCK-REFERRER: http://hitta.se -# Blocked URL = http://82.99.18.195/media.1/112/9460/146016/150x175_Hitta_FV_Feb08.gif -82.99.18.195 -#MASTER# REMARKS: Actionsfile feedback item #1888197 2008-02-06 -#MASTER# REMARKS: Have a "go there anyway" link for clk.atdmt.com -#MASTER# BLOCK-REFERRER: http://www.networkworld.com/resourcelibrary/?tid=4&type=special%20report -# Blocked URL = http://clk.atdmt.com/ -.atdmt.com/ - -#---------------------------------------------------------------------------- -# Misc Web-bugs, JS and just plain Junk. Images here aren't normal images. -#---------------------------------------------------------------------------- -{+block{Might be a web-bug.} +handle-as-empty-document -handle-as-image} -#MASTER# REMARKS: signature for user tracking nytimes, cnn.com,latimes.com and many others. 10/06/06 -/b/ss/.+ -#MASTER# BLOCK-REFERRER: http://www.thesun.co.uk/article/0,,11071-10784,00.html -#MASTER# REMARKS: widespread hitbox signature 10/06/06 -/HG\?hc= -#MASTER# BLOCK-REFERRER: http://macaddict.com 10/06/06 -.visistat.com -#MASTER# REMARKS: See <http://www.google.com/analytics/> for user tracking. -#MASTER# REMARKS: There is a ssl.google-analytics as well. -.google-analytics./ -#MASTER# BLOCK-REFERRER: http://versiontracker.com and many others. 10/20/06 -/(.*/)?__utm.gif\? -#MASTER# REMARKS: Below Moved here from -handle-as-image 10/16/06 ########## -#MASTER# BLOCK-REFERRER: http://forums2.gardenweb.com/forums/orchids/ 09/25/06 -#MASTER# REMARKS: Mostly JS and plain text stuff -.overture. -#MASTER# PROBLEM-URL: http://www.linuxtoday.com/ -#MASTER# REMARKS: /adi has HTML snipplets for use in IFRAMEs 10/15/06 -.doubleclick.net/adi -.doubleclick.net/(.*/)?adj/ -#MASTER# PROBLEM-URL: http://maps.yahoo.com/ -#MASTER# REMARKS: /AVE/iview has HTML snipplets for use in IFRAMEs 10/15/06 -view.atdmt.com/(.*/)?iview/ -#MASTER# REMARKS: Above Moved here from -handle-as-image 10/16/06 ########## -#MASTER# REMARKS: Generic, re: tracking.foxnews.com/HG? 10/01/06 -tracking. -#MASTER# BLOCK-REFERRER: http://netcraft.com and many others 10/22/06 -/(.*/)?adjs\.php\? -#MASTER# BLOCK-REFERRER: http://washingpost.com and others 10/25/06 -/.*\.gif\?D=DM -#MASTER# BLOCK-REFERRER: http://www.washingtonpost.com/ -#stats.surfaid.ihost.com/(crc/)?images/(bounce/)?uc.GIF -#MASTER# BLOCK-REFERRER: http://www.ibm.com 10/09/06 -#MASTER# REMARKS: Similar hostname and paths appear in multiple locations. -# Blocked URL = http://stats.surfaid.ihost.com/crc/images/bounce/uc.GIF -# Blocked URL = http://stats.surfaid.ihost.com/rc/images/bounce/uc.GIF -stats./c?rc/.*/uc.gif -#MASTER# BLOCK-REFERRER: http://priceline.com 10/20/06 -#MASTER# REMARKS: User tracking, webbug stuff -/(.*/)?dcs.gif\?&?dcs -#MASTER# BLOCK-REFERRER: http://www.msnbc.com 10/07/06 -#MASTER# REMARKS: And MANY others. Webbug stuff. -/(.*/)?c(lear)?\.gif\?. -#MASTER# BLOCK-REFERRER: http://www.investorguide.com 10/08/06 -#MASTER# BLOCK-REFERRER: http://foodnetwork.com, http://gardenweb.com 10/20/06 -#MASTER# REMARK: webbug type gif used in MANY places. -#MASTER# REMARK: Too many false positives -#/(.*/)?(clear|(trans_?1x|blank)?1).gif -#MASTER# REMARK: Let's try this way. -/(.*/)?(clear|blank|(trans_?|1x)?1).gif\?. -#MASTER# BLOCK-REFERRER: http://groups.yahoo.com/group/epdf/ 10/08/06 -.bc.yahoo.com/b\?P= -#MASTER# BLOCK-REFERRER: http://www.motherboard.cz 10/30/06 -x*.alexa.com -#MASTER# BLOCK-REFERRER: http://actorstheatre.org 11/02/06 -stats./.*\.gif\? -#MASTER# BLOCK-REFERRER: http://mplayernetwork.com 11/07/06 -#MASTER# BLOCK-REFERRER: http://eetimes.com 09/26/06 -/event.ng/ -#MASTER# BLOCK-REFERRER: http://www.homedepot.com/ 11/08/06 -#MASTER# BLOCK-REFERRER: http://www.williams-sonoma.com/ 11/08/06 -/cm\?[tc] -#MASTER# BLOCK-REFERRER: http://www.snapfiles.com/feedback/ 12/13/06 SF tracker -.snapfiles.net/rotation/.*\.asp -#MASTER# BLOCK-REFERRER: not provided. SF tracker #1616034 12/16/06 -#MASTER# COMMENT: JS pop-ups -spa.snap.com/ -#MASTER# BLOCK-REFERRER: http://www.gamefaqs.com/computer/doswin/game/914819.html 12/18/06 -#MASTER# COMMENT: user tracking, and run-away assorted 'junk' -#MASTER# BLOCK-REFERRER: http://formwood.com 2007-11-12 -.insitemetrics.com/ -#MASTER# COMMENT: user tracking, and assorted 'junk' -#MASTER# BLOCK-REFERRER: http://blogblog.com 2007-11-12 -.extreme-dm.com/ -#MASTER# COMMENT: user tracking, and assorted 'junk' -#MASTER# BLOCK-REFERRER: http://www.schillmania.com 2007-11-12 -stats.reinvigorate.net/ -#MASTER# COMMENT: user tracking, and assorted 'junk' -#MASTER# BLOCK-REFERRER: http://wordpress.com 2007-11-12 -.getclicky.com/ -#MASTER# COMMENT: user tracking, and assorted 'junk' -#MASTER# BLOCK-REFERRER: http://infoworld.com 2007-11-12 -.quantserve.com -# Blocked URL = http://media.adrevolver.com/adrevolver/trace?sip=123&cpy=123 -media.adrevolver.com/ - -#---------------------------------------------------------------------------- -# JavaScripts and Texts for ad and popup generation -#---------------------------------------------------------------------------- -#MASTER# BLOCK-REFERRER: http://www.chip.de/artikel/c_artikelunterseite_10423683.html -# Blocked URL = http://pagead.googlesyndication.example.com/foo/bar/baz.js -pagead*.googlesyndication./.*\.js -#MASTER# REMARKS: broadening scope from a.tfag.de/js.ng/ 10/23/06 -# Blocked URL = http://a.tfag.de/js.ng/ -/js\.ng/ -#MASTER# BLOCK-REFERRER: http://www.britannica.com/ 10/23/06 -/popunder -#MASTER# BLOCK-REFERRER: http://www.pcmag.com/ 11/22/06 per SF Tracker # 1601148 -/js/slider\.js -#MASTER# BLOCK-REFERRER: http://www.earthcore.com/ feedback item #1605385 12/14/06 -/t\.php\?cat=.*&kw=.*&sc= -#MASTER# BLOCK-REFERRER: http://floodle.net 2007-01-21 SF tracker -scripts.chitika.net/.*\.js -#MASTER# REMARKS: Actionsfile tracker #1674363 2007-03-05, text ads -#MASTER# BLOCK-REFERRER: http://www.securityfocus.com/archive/1/461489/30/0/threaded -jlinks.industrybrains.com/ -#MASTER# BLOCK-REFERRER: via Yahoo groups -#MASTER# REMARKS: Actionsfile tracker 1645513 2007-01-26 -.adinterax.com/.*\.js -#MASTER# BLOCK-REFERRER: http://dictionary.reference.com/search?q=privacy&db=* -#MASTER# REMARKS: Actionsfile tracker 1650798 2007-02-02 -.googleadservices.com/gampad/.*\.js -#MASTER# BLOCK-REFERRER: http://www.linuxworld.com/news/2007/061307-brian-aker-interview.html -#MASTER# REMARKS: Actionsfile feedback item #1736794 2007-06-13 -js.adsonar. -#MASTER# BLOCK-REFERRER: http://news.zdnet.co.uk/software/0,1000000121,39209666,00.htm -#MASTER# REMARKS: Actionsfile feedback item #1736879 2007-06-13, sponsored links. 2007-08-02, more hosts using this scheme, broadening scope. -#bwp.zdnet. -bwp. -# Blocked URL = http://us.mc123.mail.yahoo.com/mc/stampNonJs -.yahoo.com/mc/stampNonJs -# Blocked URL = http://richmedia.yimg.com/js/123/personnals_banners/PER_happy_sara1_4_425x6… -/.*/ad\.js\? -# Blocked URL = http://ad.yieldmanager.com/st?ad_type=iframe&ad_size=728x90&site=123&sectio… -/.*\?ad_(type|size)= - -############################################################################# -# Generic block-as-image patterns: -############################################################################# -{+block-as-image} -# XXX: Should use "+block{Blocked image request.}", but Privoxy-Regression-Test -# isn't smart enough to split that properly. -# Sticky Actions = +block +handle-as-image -#MASTER# BLOCK-REFERRER: http://experts-exchange.com/os2gen/ -/.*ad_?image\.(php|cgi) -#MASTER# BLOCK-REFERRER: http://flashhentai.com/Tgp/28-09-2002/index4.html -#MASTER# BLOCK-REFERRER: http://www.thughosting.com/www/ixix/a912/912s2.html -#MASTER# BLOCK-REFERRER: http://www.fantasiegirl.com/cumshots/3/spunkpatrolgirl302.htm -#MASTER# BLOCK-REFERRER: http://www.asianuncut.com/asian2/sep5628.html -#MASTER# BLOCK-REFERRER: http://www.tatgirls.com/gals/redhot-2/kitty-carl/lb10.html -#MASTER# BLOCK-REFERRER: http://www.cream-porn.com/1/hard/29/02.html -/.*recips?/ -#MASTER# BLOCK-REFERRER: http://www.paroles.net/texte/10818 -/bandeaux/ -#MASTER# COMMENT: SF tracker 09/15/06 -/.*client_?ad\.(php|cgi) -#MASTER# COMMENT: SF tracker 09/15/06 -/.*AIM_UAC.adp -#MASTER# BLOCK-REFERRER: http://www.wunderground.com/ 2007-01-20 -#MASTER# COMMENT: banner at top of page http://server2.as5000.com/AS5000/adserver/click?ID=ADST-00015&C=0&T=1169332… -/(.*/)?adserver/image -#MASTER# COMMENT: Also from wunderground.com: http://icons-aa.wunderground.com/ads/images/TripAdvisor-Blinky.gif 2007-01-20 -# Blocked URL = http://icons-aa.wunderground.com/ads/images/TripAdvisor-Blinky.gif -# URL = http://icons-aa.wunderground.com/ads/images/TripAdvisor-Blinky.gif -/(.*/)?ads/images/ - -############################################################################# -# Site-specific block-as-image patterns: -############################################################################# -#---------------------------------------------------------------------------- -# Banner farms: -#---------------------------------------------------------------------------- -#MASTER# BLOCK-REFERRER: http://www.cnn.com/ -#MASTER# BLOCK-REFERRER: http://www.aol.com/ -#MASTER# COMMENT: There are at least ar.atwola and pr.atwola. 10/01/06 -# Blocked URL = http://ar.atwola.com/ -# Blocked URL = http://pr.atwola.com/ -?r.atwola.com -#MASTER# BLOCK-REFERRER: http://www.altavista.com/ -#MASTER# BLOCK-REFERRER: http://www.tecchannel.de/ -#MASTER# BLOCK-REFERRER: http://www.whowhere.lycos.com/ -#MASTER# REMARKS: Do NOT block /adj or /adi here since these are typically JS -.[a-vx-z]*.doubleclick.net/(?!(.*/)?ad[ji]) -#MASTER# BLOCK-REFERRER: http://www.joecartoon.com/ 10/17/06 -.*servedby.advertising.com -#MASTER# BLOCK-REFERRER: http://www.yahoo.com/ -#.a.yimg.com/(?:(?!/i/).)*$ -#.a[0-9].yimg.com/(?:(?!/i/).)*$ -#.yimg.com/(.*/)?a/ -#.yimg.com/.*/(flash|java)/promotions -#.yimg.com/a/.*/flash/ -#MASTER# REMARKS: The above replaced with below. Actions file tracker #1645616 2007-01-27 -.yimg.com/.*\.yimg\.com/a/ -bs*.gsanet.com -bs*.einets.com -.qkimg.net -#MASTER# BLOCK-REFERRER: http://salon.com/ 10/19/06 -#MASTER# BLOCK-REFERRER: http://maps.yahoo.com/ -#MASTER# REMARKS: Banner farms; just exclude their corp. info -#MASTER# REMARKS: and have a "go there anyway" link for clk.atdmt.com -#MASTER# REMARKS: (Actionsfile feedback item #1888197) -[abd-vx-z]*.atdmt.com/ -#MASTER# BLOCK-REFERRER: http://www.exactaudiocopy.de/ 09/11/06 -#MASTER# BLOCK-REFERRER: http://stanford.facebook.com/home.php -# URL = http://www.fastclick.net/ -.fastclick.net -#MASTER# BLOCK-REFERRER: http://www.math.com/school/subject2/lessons/S2U3L6DP.html 09/11/06 -.casalemedia.com -#MASTER# BLOCK-REFERRER: http://www.macnn.com/ 10/09/06 -kermit.macnn.com/ -#MASTER# BLOCK-REFERRER: http://www.globalseeker.com/freesamples/ 10/09/06 -quinst.com/images -valuepage.com/images -#MASTER# BLOCK-REFERRER: http://www.imdb.com/ -ia.imdb.com/.*\.swf -#MASTER# BLOCK-REFERRER: http://www.dietngo.com/ 10/09/06 -.reactivpub. -#MASTER# BLOCK-REFERRER: http://freemail.web.de/ 10/17/06 -#MASTER# BLOCK-REFERRER: http://www.nytimes.com/2003/11/19/politics/19DEAN.html?ex=1069822800&en=dc8… -.as*.falkag. -#MASTER# BLOCK-REFERRER: http://www.macnn.com/news/18944 10/17/06 -a.tribalfusion.com/ -#MASTER# BLOCK-REFERRER: http://reviews.infosyncworld.com/palmos/featured/index.html?start=1&offset=… 10/19/06 -.adserver.com/ -#MASTER# BLOCK-REFERRER: http://computers.cnet.com/hardware/0-1027-404-20857400.html?tag=rev -#MASTER# REMARKS: Pointdexter -.ru4.com/ -#MASTER# BLOCK-REFERRER: http://www.boursorama.com/infos/actualites/detail_actu_marches.phtml?news=1… -www.smartadserver.com/ -#MASTER# BLOCK-REFERRER: http://www.chez.tiscali.fr/ 10/07/06 -admedia. -#MASTER# REMARKS: Bannerfarm used by Morpheus file sharing software -jmcms.cydoor.com/ -#MASTER# BLOCK-REFERRER: http://www.tech-report.com/etc/2003q2/3dmurk03/index.x?pg=7 -#MASTER# REMARKS: Netshelter.com farm -#MASTER# REMARKS: Not found but leaving 10/07/06 -.adtrix.com -#MASTER# BLOCK-REFERRER: http://discussion.brighthand.com/forumdisplay.php?s=fee44a5b2a6fc2e9e79d647… 10/19/06 -*[0-9].tribalfusion.com/ -#MASTER# REMARKS: Actions file tracker 1547656 09/02/06 -#MASTER# REMARKS: Update pattern: Actionsfile feedback item #1698822, was opened at 2007-04-11 to catch https://secure.img-cdn.mediaplex.com/0.... -# Blocked URL = https://secure.img-cdn.mediaplex.com/0/7454/43775/YA3149_17566_728x90_FCR_0… -.img*.mediaplex.com -#MASTER# BLOCK-REFERRER: http://www.tomshardware.com/ 09/28/06 -#MASTER# REMARKS: There is adfarm and altfarm.mediaplex -#MASTER# REMARKS: 20070711 Actionsfile feedback #1749013 /ad/fm/ appended, as click-throughs were being blocked. Could only find adverts being served from /ad/fm/ -a*farm.mediaplex.com/ad/fm/ -#MASTER# REMARKS: Support request 1312362 09/08/06 -#MASTER# DUPLICATED: adserver.itsfogo.com -#MASTER# REMARKS: Actionsfile feedback 09/11/06 http://matrix.mediavantage.de/mx.one?p=210&pa=1060&pb=1906&pd=10944&aid=399… -# URL = http://matrix.mediavantage.de/mx.one?p=210&pa=1060&pb=1906&pd=10944&aid=399… -#MASTER# BLOCK-REFERRER: http://www.heise.de/newsticker/meldung/61067 -matrix.mediavantage. -#MASTER# REMARKS Ad generator, SF user tracker 09/11/06 -.cibleclick.com -#MASTER# REMARKS: Ad generator 09/11/06 http://c1.netshelter.net/campaigns/ITTTech/itttech09_728x90.gif -#MASTER# BLOCK-REFERRER: http://www.osnews.com/ 09/11/06 -.netracker.net -#MASTER# REMARKS: ad generator domain per SF tracker 09/11/06 -.interclick.com -#MASTER# REMARKS: Ad generator http://c4.maxserving.com/iserver/site=5314/area=ad728x90/aamfmt=normal/aams… -#MASTER# BLOCK-REFERRER: http://www.imdb.com/name/nm0000168/bio 09/12/06 -# URL = http://c4.maxserving.com/iserver/site=5314/area=ad728x90/aamfmt=normal/aams… -.maxserving.com -#MASTER# REMARKS: Ad generator http://partner.gonamic.de/Affiliate/ViewCounter/index.cfm?trackingID=368232… -#MASTER# BLOCK-REFERRER: http://torrent.to/torrent/ 09/12/06 -# URL = http://partner.gonamic.de/Affiliate/ViewCounter/index.cfm?trackingID=368232… -.gonamic.de -# URL = http://img.webads.nl/ -.webads. -#MASTER# REMARKS: Ad generator http://media.adlegend.com/centrport/20060/511290/GM_emplyee_300x250.gif -# URL = http://media.adlegend.com/centrport/20060/511290/GM_emplyee_300x250.gif -#MASTER# BLOCK-REFERRER: http://news.yahoo.com/news?tmpl=story&cid=534&e=1&u=/ap/20050613/ap_on_he_m… -.adlegend.com -#MASTER# REMARKS: Ad generator 09/12/06 http://dist.belnk.com//4/placement/1738/alt_offer/static.jpg -# URL = http://dist.belnk.com//4/placement/1738/alt_offer/static.jpg -#MASTER# BLOCK-REFERRER: http://groups.yahoo.com/group/louisianaandmardigra/messages/1?viscount=100 -.belnk.com -.euros4click. -#MASTER# BLOCK-REFERRER: http://www.planet3dnow.de/cgi-bin/newspub/viewnews.cgi?id=1129904195 -ads-*.quarterserver. -#MASTER# BLOCK-REFERRER: http://adrian.adrian.org/ 10/07/06 -searchportal.information.com/ -#MASTER# BLOCK-REFERRER: http://www.nbc4.com/news/2672416/detail.html 10/17/06 -images.ibsys.com/ -#MASTER# BLOCK-REFERRER: http://www.rentalhouses.com/search_results.php?searchnew=1&citys_city=&city… 11/05/06 -.lduhtrp.net/image -#MASTER# BLOCK-REFERRER: http://floodle.net 2007-01-21 SF tracker -scripts.chitika.net/.*\.(gif|png|jpg) -#MASTER# REMARKS: Actionsfile feedback item #1648478 2007-01-30 -.projectwonderful.com/gen.php -#MASTER# BLOCK-REFERRER: http://www.multimap.com/ (sporadic) -#MASTER# REMARKS: Actionsfile feedback item #1665682 2007-02-21 -.akamai.net/.*\.adtech\.de/.*\.(gif|png) -#MASTER# BLOCK-REFERRER: via Yahoo groups -#MASTER# REMARKS: Actionsfile tracker 1645513 2007-01-26 -.adinterax.com/.*\.(gif|jpg) -#MASTER# BLOCK-REFERRER: http://www.wotzon.com/profilepage.html?comp_id=1002310&CatID=2 -#MASTER# REMARKS: Ad generator per Actionsfile feedback item #1749870 2007-07-08 -# URL = http://img.directtrack.com -img.directtrack.com -#MASTER# BLOCK-REFERRER: http://www.thinkbroadband.com/news/3621-complaint-about-orange-broadband-ad… -# URL = http://eas.apm.emediate.eu/media.5/1/1228/19193/ACT1215_120x600_v3.gif -.emediate.eu/ -# URL = http://feedads.googleadservices.com/~a/dPlpGU767u4D4kVO8EGuUlnf1Q0/i -# URL = http://feedads.googleadservices.com/~at/EpX-FnAXxwdaBSq-GRze37-rG0M/i -.googleadservices.com/~ -#MASTER# REMARKS: Block yahoo email & ygroups banner ad -# URL = http://ts.richmedia.yahoo.com/...hummingbird.jpg?adxq=NNN -.richmedia.yahoo.com/.*\.(gif|jpe?g)\?ad -# Blocked URL = http://this.content.served.by.adshuffle.com/p/a=/view.pxl -.served.by.adshuffle.com/ -# Blocked URL = http://newsletter.adsonar.com/nwrss/imgs/nwr_123.PNG?placementId=123&plid=1… -.adsonar.com/.*/imgs/ -# Blocked URL = http://rtb.pclick.yahoo.com/images/nojs.gif?p=3 -.pclick.yahoo.com/images/ -# Blocked URL = http://rover.ebay.com/ar/1/2/3?mpt=123&adtype=1&size=728x90 -/.*\&adtype= - -#---------------------------------------------------------------------------- -# Cross-site user tracking -#---------------------------------------------------------------------------- -#MASTER# REMARKS: +block-as-image here -#MASTER# BLOCK-REFERRER: http://os2.ru/ 10/07/06 -.*.*.spylog.com/ -#MASTER# BLOCK-REFERRER: http://www.dhtmlplanet.com/ 10/07/06 -statse.webtrendslive.com -#MASTER# BLOCK-REFERRER: http://www.versiontracker.com/ -#MASTER# REMARKS: 1) Used on many sites 2) URLs don't _end_ in .gif, hence +imageblock -spinbox.versiontracker.com/.*\.(gif|jpg) -#MASTER# BLOCK-REFERRER: http://mycroft.mozdev.org/ 10/07/06 -stat.onestat.com -#MASTER# BLOCK-REFERRER: http://www.meparecebien.com/noticias/discograficas/sinnamon-records/sinnamo… -#MASTER# REMARKS: Actionsfile feedback item #1644583 2007-03-05 -imp*.tradedoubler.com -#MASTER# BLOCK-REFERRER: http://www.sharepoint.boo.pl/ -#MASTER# REMARKS: Not found, but left 10/07/06 -stat.webmedia. -#MASTER# BLOCK-REFERRER: http://www.asp-php.net/index.php 10/07/06 -log*.xiti.com/ -log*.hit-parade.com/ -#MASTER# BLOCK-REFERRER: http://www.msnbc.com/news/884810.asp?0si=-&cp1=1 -# URL = http://www.xml.eshop.msn.com/tracksponsorimpression.asp -www.xml.eshop.msn.com/tracksponsorimpression.asp -#MASTER# BLOCK-REFERRER: http://www.planetgamecube.com/ 10/07/06 -.imrworldwide.com -#MASTER# REMARKS: Actionsfile feedback 1555719 09/10/06, and Debian Bug report -#MASTER# BLOCK-REFERRER: http://www.nrc.nl/ 09/12/06 -.clicktracks.com -#MASTER# REMARK: Actionsfile tracker 1159072 09/12/06 -.etracker. -#MASTER# REMARK: Actionsfile tracker 1243494 09/12/06 -#MASTER# BLOCK-REFERRER: http://www.spanked-slaves.com/movies14/bdsm14c.html -.x-traceur.com -#MASTER# BLOCK-REFERRER: http://www.aintitcool.com/ 10/05/06 -content.ipro.com -#MASTER# BLOCK-REFERRER: http://www.weatherbug.com/default.asp 10/05/06 -.247realmedia.com -#MASTER# BLOCK-REFERRER: http://www.samachar.com/ 10/05/06 -.sify.com -#MASTER# BLOCK-REFERRER: http://www.nbc4.com/news/2672416/detail.html 10/06/06 -.searchignite.com -#MASTER# BLOCK-REFERRER: http://www.sdtimes.com/ 10/07/06 -.statcounter.com -#MASTER# BLOCK-REFERRER: http://www.dn.se/ 10/07/06 -.research-int.se/data -#MASTER# BLOCK-REFERRER: http://www.chez.aliceadsl.fr/ 10/07/06 -.cybermonitor.com -#MASTER# BLOCK-REFERRER: http://disney.go.com -#MASTER# BLOCK-REFERRER: http://abcnews.com 10/15/06 -log.go.com/log -#MASTER# BLOCK-REFERRER: http://www.care2.com 10/18/06 -stats.indextools.com -#MASTER# BLOCK-REFERRER: http://www.techcrunch.com/ 12/16/06 #1616497 3 urls. -tra*.measuremap.com -.eurekster.com/sidebar -tra*.mybloglog.com -#MASTER# BLOCK-REFERRER: http://www.polymervision.com/ -#MASTER# REMARKS: Actionsfile feedback item #1629370 01/16/07 -.guesttrace. -#MASTER# BLOCK-REFERRER: http://dictionary.com -#MASTER# REMARKS: Actionsfile feedback item #165078 2007-02-05 -insightxe./data/ -#MASTER# BLOCK-REFERRER: http://www.unitedairlines.com -#MASTER# REMARKS: Actionsfile feedback item #1650797 2007-02-05 -.insightfirst.com -#MASTER# BLOCK-REFERRER: http://rss.slashdot.org/Slashdot/slashdot -# Blocked URL = http://rss.slashdot.org/~a/Slashdot/slashdot?i=ofbWqX -# URL = http://rss.slashdot.org/~a/Slashdot/slashdot?i=ofbWqX -rss.slashdot.org/~a/Slashdot/slashdot\? -# Blocked URL = http://rss.slashdot.org/~r/Slashdot/slashdot/~4/102113044 -# URL = http://rss.slashdot.org/~r/Slashdot/slashdot/~4/102113044 -rss.slashdot.org/~r/Slashdot/slashdot/~4/ -#MASTER# BLOCK-REFERRER: http://www.isys.ucl.ac.be/bchi/research/Kwaresmi.htm -#MASTER# REMAKRKS: Actionsfile feedback item #1849627 2007-12-12 -[a-z][0-9].nedstatbasic.net/ -#MASTER# BLOCK-REFERER: http://feeds.feedburner.com/dilbertdailystrip/ -# Blocked URL = http://feeds.feedburner.com/~r/DilbertDailyStrip/~4/274512747 -#MASTER# BLOCK-REFERER: http://feeds.feedburner.com/PCLoadLetter -# Blocked URL = http://feeds.feedburner.com/~r/PCLoadLetter/~4/270448381 -#MASTER# REMAKRKS: This seem to be a common pattern for web bugs in feedburner feeds. -feeds.feedburner.com/~r/.*/~4/ -# Blocked URL = http://feedproxy.google.com/~r/DilbertDailyStrip/~4/y_kXD1z1HO0 -feedproxy.google.com/~r/.*/~4/ -# Blocked URL = http://feeds.feedburner.com/~a/DilbertDailyStrip?a=Ebzxel -#MASTER# REMAKRKS: This looks like a pattern as well, maybe we should block feeds.feedburner.com/~a/ here. -feeds.feedburner.com/~a/DilbertDailyStrip\? -#MASTER# BLOCK-REFERER: http://www.buch.de/ -# URL = http://track.webtrekk.de/471497967328727/wt.pl?p=177,de.buch.show.home,1,10… -track.webtrekk.de/ - -#---------------------------------------------------------------------------- -# Specific counters (see above for generic patterns) -#---------------------------------------------------------------------------- -#MASTER# BLOCK-REFERRER: http://www.distrowatch.com/table.php?distribution=linex 10/19/06 -#MASTER# BLOCK-REFERRER: http://floodle.net 2007-01-21 tracker #1641102 -s*.sitemeter.com/(meter|js/counter.js) -#MASTER# BLOCK-REFERRER: http://personales.mundivia.es/lbouza/ 10/19/06 -# URL = http://fastcounter.bcentral.com/ -fastcounter.bcentral.com/ -#MASTER# BLOCK-REFERRER: http://osnews.com/ 10/19/06 -# URL = http://bilbo.counted.com/ -bilbo.counted.com/ - -#---------------------------------------------------------------------------- -# On-site ads and other single sources: -#---------------------------------------------------------------------------- -#MASTER# BLOCK-REFERRER: http://www.travelocity.com/Vacations/0,,TRAVELOCITY||Y,00.html?HPTRACK=mpc_… -#MASTER# BLOCK-REFERRER: http://dest.travelocity.com/DestGuides/geo_frontdoor/0,,TRAVELOCITY,00.html… 10/07/06 -.travelocity./Sponsor_gifs/ -#MASTER# REMARKS: Referenced from HTML-Emails (not checked 10/08/06) -# URL = http://foo.weather.com/creatives/ -# URL = http://bar.weather.com/web/services/email/ -.weather.com/creatives/ -.weather.com/web/services/email/ -#MASTER# BLOCK-REFERRER: http://gamespot.com/gamespot/filters/0,10850,6013548,00.html 10/08/06 -/.*/topslots/topslot -.contextweb.com/ -.offermatica.com/ -#MASTER# BLOCK-REFERRER: http://www.jpost.com/ 10/08/06 -.adbrite.com -#MASTER# BLOCK-REFERRER: http://www.jpost.com/servlet/Satellite?pagename=JPost/A/JPArticle/ShowFull&… -.jpost.com/images/\d+/promos/ -#MASTER# BLOCK-REFERRER: http://www.infoempleo.com/ 10/08/06 -.infoempleo.com/(pop-up|images(/Nueva/|/motor)) -#MASTER# BLOCK-REFERRER: http://www.hardocp.com/ 10/08/06 -hera.hardocp.com/ -#MASTER# BLOCK-REFERRER: http://people.aol.com/ 10/08/06 -leadback.advertising. -#MASTER# BLOCK-REFERRER: http://astalavista.box.sk/ 10/08/06 -.yieldmanager.com/ -.displayadsmedia.com -# URL = http://astalavista.box.sk/adult.foo.jpg -astalavista.box.sk/adult.*\.jpg -#MASTER# BLOCK-REFERRER: http://www.bol.com.br/ -smartad.*.*.* -#MASTER# BLOCK-REFERRER: http://www.dinside.no/ 10/08/06 -.dinside.no/annonsorer/ -#MASTER# BLOCK-REFERRER: http://www.heise.de/ 10/08/06 -#MASTER# BLOCK-REFERRER: http://www.spiegel.de/ -/RealMedia/ads/ -#MASTER# REMARKS: Variation 2007-11-12 -/RealMediaAds/ -#MASTER# BLOCK-REFERRER: http://www.powerdvd.com 12/28/06 per SF tracker -/top\.php\?d=.*\.[a-z]{2,5} -#MASTER# REMARKS: Actionsfile feedback item #1764161 2007-07-31 -#MASTER# BLOCK-REFERRER: http://www.webster.com/dictionary/revering -.google.com/afsonline - -############################################################################# -# Site-specific unblockers: -############################################################################# -{-block} -# Sticky Actions = -block -#MASTER# UNBLOCK-REFERRER: http://www.faqs.org/ -.faqs.org/banner\.html -#MASTER# UNBLOCK-REFERRER: http://bannerblind.mozdev.org/ -bannerblind.mozdev.org -#MASTER# UNBLOCK-REFERRER: http://advogato.org/ -advogato.org -#MASTER# UNBLOCK-REFERRER: http://www.handelsblatt.com/ -ad*.vhb.de -#MASTER# UNBLOCK-REFERRER: http://www.globalintersec.com/adv/sendtemp-2001021302.txt -.globalintersec.com/adv -#MASTER# UNBLOCK-REFERRER: http://www.wunderground.com/geo/BannerPromo/US/NY/New_York.html 10/08/06 -banners.wunderground.com/ -#MASTER# UNBLOCK-REFERRER: http://www.openoffice.org/ 10/09/06 -.openoffice.org/banners/ -#MASTER# UNBLOCK-REFERRER: http://www.amazon.com/exec/obidos/tg/browse/-/130/ref=gw_br_dvd/102-9730978… 10/09/06 -#MASTER# REMARKS: Part of site decoration -.amazon.com/.*/banners/ -#MASTER# UNBLOCK-REFERRER: http://www.washingtonpost.com/wp-dyn/articles/A43890-2002Aug4.html -#MASTER# REMARKS: Javascripts whose absence messes the page -.washingtonpost.com/wp-srv/ -# URL = http://www.gnome.org/images/banner-gnomeis -.gnome.org -#MASTER# UNBLOCK-REFERRER: http://www.nycsubway.org/ 10/09/06 -.nycsubway.org/img/banner -#MASTER# UNBLOCK-REFERRER: http://www.forgotten-ny.com/ADS/manhattanads/moremahnattan.html -# URL = http://www.forgotten-ny.com/ADS/manhattanads/moremahnattan.html -.forgotten-ny.com/ADS/ -# URL = http://counter.li.org -counter.li.org -#MASTER# UNBLOCK-REFERRER: http://adrian.adrian.org/ 10/09/06 -# URL = http://adrian.adrian.org -adrian.adrian.org -#MASTER# UNBLOCK-REFERRER: http://adela.karlin.mff.cuni.cz/ 10/09/06 -# URL = http://adela.karlin.mff.cuni.cz -adela.karlin.mff.cuni.cz -#MASTER# UNBLOCK-REFERRER: http://www.swcp.com/rtoads/printmag/issue3/neg_data.html 10/09/06 -.swcp.com/rtoads/ -#MASTER# UNBLOCK-REFERRER: http://www.privoxy.org/actions/index.php -#MASTER# REMARKS: Don't block our own feedback process, even if the -#MASTER# REMARKS: parameters contain block patterns -# URL = http://www.privoxy.org/actions/index.php -.privoxy.org -#MASTER# UNBLOCK-REFERRER: http://sourceforge.net/help/tracker.php -sourceforge.net/.*tracker -#MASTER# UNBLOCK-REFERRER: http://www.brawnylads.com/ -# URL = http://www.brawnylads.com/ -.brawnylads.com -#MASTER# UNBLOCK-REFERRER: http://adzapper.sourceforge.net/ -# URL = http://adzapper.sourceforge.net/ -adzapper. -#MASTER# UNBLOCK-REFERRER: http://de.altavista.com/web/adv -# URL = http://de.altavista.com/web/adv -.altavista.com/web/adv -# URL = http://rads.mcafee.com/rads/scripts/RADS.dll?QueryProduct2 -rads.mcafee.com/ -# URL = http://linuxfromscratch.org/cgi-bin/lfscounter.cgi -linuxfromscratch.org/ -#MASTER# UNBLOCK-REFERRER: http://dv411.com/advc50.html -# URL = http://dv411.com/advc50.html -dv411.com/.*advc50 -# URL = http://www.freeswan.org/freeswan_trees/freeswan-1.98b/doc/adv_config.html -.freeswan.org/ -# URL = http://www.arm.com/support/ads_faq?OpenDocument&ExpandSection=11 -www.arm.com/.*ads -# URL = http://www.anybrowser.org/campaign/ -www.anybrowser.org/ -# URL = http://www.tads.org/ -www.tads.org/ -# URL = http://www.mbe.com/redir/packtrack.asp -.mbe.com/redir/packtrack.asp -.iship.com/trackit/ -# URL = http://www.esis.com.au/AdvSerialCards/Firewire.htm -.esis.com.au/AdvSerialCards -#MASTER# UNBLOCK-REFERRER: http://www.familysearch.org/ 10/11/06 -.familysearch.org/.*banner -#MASTER# UNBLOCK-REFERRER: http://coder.com/ 10/11/06 -coder.com/creations/banner/ -#MASTER# UNBLOCK-REFERRER: http://arnolds.dhs.org/static/adv_tools.html 10/11/06 -# URL = http://arnolds.dhs.org/static/adv_tools.html -arnolds.dhs.org/static/adv_tools.html -#MASTER# UNBLOCK-REFERRER: http://www.gpl.org/ -.gpl.org/ -#MASTER# UNBLOCK-REFERRER: http://europa.eu.int/yourvoice/ 10/11/06 -.europa.eu. -#MASTER# UNBLOCK-REFERRER: http://www.schooner.com/~loverso/no-ads/ 10/11/06 -# URL = http://www.schooner.com/~loverso/no-ads/ -.schooner.com/~loverso/no-ads/ -#MASTER# UNBLOCK-REFERRER: http://source.bungie.org/ 10/11/06 -source.bungie.org/ -# URL = http://adonthell.linuxgames.com/ -adonthell.linuxgames.com/ -#MASTER# UNBLOCK-REFERRER: http://news.bbc.co.uk/furniture/chinese/banner/bbccantonese_600.gif -#MASTER# REMARKS: Banner-free site(s). -.bbc.co.uk/ -# URL = http://adc.netlabs.org/ -adc.netlabs.org/ -#MASTER# UNBLOCK-REFERRER: http://www.tela.bc.ca/tads/authoring/multimedia-tads-docs/latin2.htm 10/11/06 -# URL = http://www.tela.bc.ca/tads/authoring/multimedia-tads-docs/latin2.htm -.tela.bc.ca/tads/ -# URL = http://adbusters.org/information/ -adbusters.org/ -# URL = http://www.eads.com/ -# URL = http://www.eads.net/ -# URL = http://www.eads.de/ -.eads.*/ -# URL = http://brew.qualcomm.com/brew/en/developer/resources/ad/documentation.html -.qualcomm.com/brew/en/developer/resources/ad/ -# URL = http://upgrade.bitdefender.com/update71/avx/Plugins/adsntfs.xmd.gzip -/update\d\d/.*adsnt.* -#MASTER# UNBLOCK-REFERRER: http://msdn.microsoft.com/ 09/11/06 -.microsoft.com/.*masthead -#MASTER# UNBLOCK-REFERRER: http://indymedia.org adfree site 09/11/06 -.indymedia.org -# URL = http://www.seanbaby.com/stupid/comicads05.shtml -.seanbaby.com -# URL = http://www.cels.org/db/keep-track.pl?cat:1 -.cels.org/.*track -#MASTER# UNBLOCK-REFERRER: http://www.nic.ad.jp/ See http://jprs.co.jp/en/jpdomain.html 09/11/06 -#MASTER# REMARKS: 2007-10-04, increase scope per Actionsfile feedback item #1807613 -#.nic.ad.jp -#MASTER# REMARKS removed .ad.jp per Actionsfile feedback item #1807613 -#MASTER# UNBLOCK-REFERRER: http://www.flickr.com/photo_zoom.gne?id=32594118&size=l 09/11/06 -#MASTER# REMARKS: creativecommons.org worthwhile organization 09/11/06 -/(.*/)?somerights20.gif -.creativecommons.org -# URL = http://www.ups.com/WebTracking/track?loc=en_US -.ups.com/.*/track -#MASTER# UNBLOCK-REFERRER: http://adju.st 09/12/06 -.adju. -#MASTER# REMARKS: Ad-free art site 09/12/06 -.rubberslug.com -.freebsd.org -.fsf.org -.gnu.org -#MASTER# REMARKS: SF tracker 09/15/06, and #1750779 2007-07-09 -#MASTER# REMARKS: New home? http://adiumx.cachefly.net/Adium_1.0.5.dmg -adium*.*. -#MASTER# UNBLOCK-REFERRER: http://google.com 10/01/06 -#MASTER# REMARKS: This allows many (but not all) Google "Sponsored Links" to function. -#MASTER# REMARKS: Presumably if someone clicks these they want to go there. -.googleadservices./pagead/adclick -#MASTER# UNBLOCK-REFERRER: http://www.garaget.org -#MASTER# REMARKS: These are "ads" from individuals selling cars per tracker. 10/06/06 -.garaget.org/annonser/ -#MASTER# UNBLOCK-REFERRER: http://www.macworld.com/ 10/07/06 -#MASTER# REMARKS: Without the unblock, the page layout is horribly broken 10/08/06 -edge.macworld.com -#MASTER# UNBLOCK-REFERRER: http:// www.discovery.de 10/19/06 -#MASTER# REMARKS: These are promos relevant to the page content. -.discovery./.*/topads/ -#MASTER# UNBLOCK-REFERRER: http://dawn.com -#MASTER# REMARKS: SF Actionsfile tracker 10/19/06. These images are not ads. -.dawn.com/.*/(9690dina|aurora_award)\. -#MASTER# UNBLOCK-REFERRER: http://google.com/reader/ -#MASTER# REMARKS: Initial page does not load, per Support request 10/27/06 -.google.com/reader/ -#MASTER# REMARKS: Actionsfile Tracker 1587079 10/30/06 -.parcel2go.com/track -#MASTER# REMARKS: Actionsfile Tracker #1612950 12/11/06 -.amazon.com/gp/gift-central/.*recip/ -#MASTER# UNBLOCK-REFERRER: http://yahoo.com 2007-01-27 -#MASTER# REMARKS: Actionsfile Tracker #1645501, this is a UI page element. -.yimg.com/.*/themes/ad/ -#MASTER# UNBLOCK-REFERRER: http://mozilla.hongo.wide.ad.jp/pub/mozilla.org//thunderbird/releases/ -#MASTER# REMARKS: Actionsfile feedback item #1672918 2007-03-03 -# URL = http://mozilla.hongo.wide.ad.jp/pub/mozilla.org//thunderbird/releases/ -.ad.*/pub/mozilla.org/ -# URL = http://lads.myspace.com/mini/mini.swf?b=NDgwNzU1ODE=&o=NjQwNzIzMA==&d=MTE3N… -#MASTER# UNBLOCK-REFERRER: http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=5… -#MASTER# UNBLOCK-REFERRER: http://lads.myspace.com/videos/vplayer.swf -#MASTER# REMARKS: MySpace videos caught by .*ads. The above profile.myspace.com link grabs the vplayer.swf file (which does not work when directly fetched) -# URL = http://lads.myspace.com/videos/vplayer.swf -lads.myspace.com -#MASTER# REMARKS: 20070402 Adam Piggott first-party tracking. 20070411 Moved from generic unblockers by path to site-specific unblockers. -#MASTER# UNBLOCK-REFERRER: http://www.shockwave.com/servlet/DownloadEcommTracker?sku=fizzball-pc&promo… -# URL = http://www.shockwave.com/servlet/DownloadEcommTracker?sku=fizzball-pc&promo… -.shockwave.com/servlet/DownloadEcommTracker -#MASTER# REMARKS: 20070411 Adam Piggott fish4.co.uk is a popular UK advertising site for cars, properties and jobs and uses ad/advert all over the place, understandably. -# URL = http://www.fish4.co.uk/iad/lettings/advert?adId=12389712&src=nestoria -.fish4.co.uk/.*ad -#MASTER# REMARKS: Actionsfile feedback item #1700037 2007-04-13 HB -# URL = http://www.mp3.com.au/popup/popup.asp?id=110433 -.mp3.com.au/.*popup -#MASTER# REMARKS Actionsfile feedback #1700915 2007-04-15 -# URL = http://www.svd.se/ego/339/http://www.e24.se/dynamiskt/reklam_media/did_1509… -# URL = http://www.e24.se/dynamiskt/reklam_media/did_15092793.asp -/(.*/)?dynamiskt/reklam_media/did_ -#MASTER# REMARKS 20070710 Actionsfile feedback #1751020 -switch.atdmt.com/action/ -# URL = http://www.parcelforce.com/portal/pw/track?catId=7500082 -.parcelforce.com/.*track -#MASTER# UNBLOCK-REFERRER: redirect from http://go.microsoft.com/fwlink?linkid=51093 -#MASTER# REMARKS: Actionsfile feedback item #1757121 2007-07-19 -.microsoft.com/.*/adschema/ -# URL = http://upload.wikimedia.org/wikipedia/en/a/ad/Picturecarnegie.jpg -.wikimedia.org/ -# URL = http://en.wikipedia.org/wiki/Advertisement -.wikipedia.org/ -#MASTER# REMARKS Actionsfile feedback item #2299717 2008-11-16 -# URL = http://en.wiktionary.org/wiki/advertisement -.wiktionary.org/ -# URL = http://curl.haxx.se/docs/adv_20070710.html -.haxx.se/docs/adv_ -# URL = http://www.google.com/adsense/ -www.google.com/adsense/ -# URL = http://www.encyclopediadramatica.com/Advertisement -# URL = http://images.encyclopediadramatica.com/images/b/b5/Advertising-Dierentuin.… -.encyclopediadramatica.com/ -#MASTER# UNBLOCK-REFERRER: http://lifehacker.com 2008-04-18 HB -# URL = tags.gawker.com/assets/minify.php?files=/assets/base.v6/css/global.css,/ass… -tags.gawker.com/.*css$ -# URL = http://cgi.tnt.co.uk/TrackNTrace/quicktrack.asp -.tnt.co.uk/TrackNTrace/ -#MASTER# UNBLOCK-REFERRER: http://www.supermediastore.com/trackorder.html -# URL = http://secure.howtoburndvd.net/ups/track.php -/ups/track\.php -#MASTER# REMARKS: Actionsfile feedback item #1886140 2008-02-04 -#MASTER# UNBLOCK-REFERRER: http://idonthateyouall.imeem.com/video/8zH0_f9i/kiley_rilo_pull_me_in_tight… -# URL = http://ad.doubleclick.net/crossdomain.xml -ad.doubleclick.net/crossdomain\.xml -#MASTER# REMARKS: Actionsfile feedback item #2021509 2008-07-18 -#MASTER# REMARKS: Allow realplayer site help popup windows -#MASTER# UNBLOCK-REFERRER: http://real.custhelp.com/cgi-bin/real.cfg/php/enduser/std_adp.php?p_faqid=4… -# URL = http://real.custhelp.com/cgi-bin/real.cfg/php/enduser/popup_adp.php -real.custhelp.com/cgi-bin/real\.cfg/php/enduser/popup_adp\.php -# URL = http://fritz.fonwlan.box/cgi-bin/webcm?getpage=../html/de/help/popup.html&v… -fritz.fonwlan.box/ -# URL = http://fritz.box/cgi-bin/webcm?getpage=../html/de/help/popup.html&var:lang=… -fritz.box/ -#MASTER# REMARKS: Actionsfile feedback item #2043327 2008-08-08 -# URL = http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402747&sliceId=1 -.adobe.com -# URL = http://qa.debian.org/popcon.php -qa.debian.org/popcon\.php -#MASTER# REMARKS: Support Requests item #2432535 2008-12-16 -# URL = http://www.mta.info/bandt/traffic/advmain.htm -.mta.info/.*advmain.htm$ -#MASTER# REMARKS: We also use this as a light character class test, therefore the additional URL directives. -# URL = http://www.proaurum.de/bannerA2/image/pro_master_r3_01_04.gif -# URL = http://www.proaurum.de/bannerA1/image/limitorder2.gif -# URL = http://www.proaurum.de/bannerA3/image/pro_master_r5_banken_01_01+.gif -# URL = http://www.proaurum.de/bannerB2/image/pro_banner_mitte.gif -# URL = http://www.proaurum.de/bannerB1_/image/pro_banner_links.gif -# URL = http://www.proaurum.de/bannerC1/image/partner1.png -.proaurum.de/banner[ABC]\d_?/ -# URL = http://www.goldmoney.com/en/images/home/banner_r4_c1.gif -.goldmoney.com/ -#MASTER# REMARKS: Actionsfile feedback item #2017126 2008-07-13 -#MASTER# REMARKS: The dutch newspaper site of Algemeen Dagblad (http://www.ad.nl) is blocked -# URL = http://www.ad.nl/ -.ad.nl/ -#MASTER# REMARKS: yahoo groups self-promotion - and the page is uglier without it -# URL = http://us.i1.yimg.com/us.yimg.com/i/yg/img/ads/bestofygroups.jpg -.yimg.com/.*/ads/bestofygroups.jpg$ -#MASTER# REMARKS: NYT home page is messed up because .css files are blocked -#MASTER# UNBLOCK-REFERRER: http://www.nytimes.com/ -# URL = http://graphics8.nytimes.com/css/0.1/screen/common/ads.css -# URL = http://graphics8.nytimes.com/css/0.1/screen/homepage/ads.css -.nytimes.com/.*/ads\.css$ - - -############################################################################# -# Site-specific special rules: -############################################################################# - -#---------------------------------------------------------------------------- -# These sites are very complex (read: keen on your identity) and require -# minimal interference. -#---------------------------------------------------------------------------- -{fragile} -.office.microsoft.com -.windowsupdate.microsoft.com -#MASTER# PROBLEM URL: http://metrics.apple.com 10/11/06 -# too broad: .apple.com -www.apple.com -store.apple.com -images.apple.com -#MASTER# REMARKS: Actions Tracker 1293057 09/02/06 -.update.microsoft.com -#MASTER# REMARKS: Various reports 09/16/06. This site also requires pop-ups. -mail.google. - -#---------------------------------------------------------------------------- -# Semi-fragile, allow for blocks. -#---------------------------------------------------------------------------- -{ -crunch-all-cookies -filter -fast-redirects -hide-referer -prevent-compression } -#MASTER# REMARKS: Problem URL: adserver.yahoo.com 10/01/06 -#MASTER# REMARKS: This is much too broad for my taste. It forces me to add -#MASTER# REMARKS: a special yahoo section in my user.action file, just to -#MASTER# REMARKS: confirm my defaults in default.action. fk 2007-01-19 -.yahoo.com - -#---------------------------------------------------------------------------- -# Shopping and banking sites - allow cookies and pop-ups -#---------------------------------------------------------------------------- -#MASTER# REMARKS: This section not checked 10/11/06 HB -{shop} -.quietpc.com -.worldpay.com # for quietpc.com -.jungle.com -.dabs.com -.overclockers.co.uk -.db24.de -.ebay. -.mobile.de -www.fondationlejeu.com -www.techtv.com -.mywebgrocer.com - -#---------------------------------------------------------------------------- -# Subscription sites (with credible privacy policy) - allow permanent cookies -#---------------------------------------------------------------------------- -{-session-cookies-only} -#MASTER# PROBLEM-URL: http://www.nytimes.com/auth/login -.nytimes.com/ -#MASTER# PROBLEM-URL: http://www.volkskrant.nl/ -.volkskrant.nl/ - -#---------------------------------------------------------------------------- -# These sites require pop-ups, so don't use the unconditional filters. -#---------------------------------------------------------------------------- -{allow-popups} -#MASTER# PROBLEM-URL: http://www.aprilbarrows.com/discography.html -www.aprilbarrows.com/discography\.html$ -#MASTER# PROBLEM-URL: http://www.nvidia.com/view.asp?PAGE=windows2000 -.nvidia.com -#MASTER# PROBLEM-URL: http://www15.chathouse.com/games/ -www*.chathouse.com/games/ -#MASTER# PROBLEM-URL: http://www.bild.de/ -.bild.t-online.de -#MASTER# PROBLEM-URL: http://www.netflix.com/ -.netflix.com -#MASTER# PROBLEM-URL: http://my.aol.com/ -my.aol.com -#MASTER# PROBLEM-URL: http://www.cnn.com/ -#MASTER# REMARKS: Re-enable "Story Tools" i.e. printing, emailing etc. -i.cnn.net/cnn/.*/clickability/button -#MASTER# PROBLEM-URL: http://www.rosettaproject.org:8080/live/search/contribute/swadesh/view?ethn… -.rosettaproject.org -#MASTER# PROBLEM-URL: http://www.quantum.com requires popups for downloads, etc. 09/11/06 -.quantum.com -#MASTER# PROBLEM-URL: http://www.liberation.fr 11/23/06 Actions tracker -.liberation.fr - -#---------------------------------------------------------------------------- -# Sometimes (i.e. often!) fast-redirects catches things by mistake -#---------------------------------------------------------------------------- -#MASTER# REMARKS: This section NOT checked 10/13/06 HB -{-fast-redirects} -# Sticky Actions = -fast-redirects -www.ukc.ac.uk/cgi-bin/wac\.cgi\? -#MASTER# PROBLEM-URL: http://www.google.com/search?q=foo -.google. -#MASTER# PROBLEM-URL: http://de.altavista.com/q?pg=q&q=foo&kl=XX&search.x=28&search.y=8&what=web -.altavista.com/(.*(like|url|link):|trans.*urltext=)http -#MASTER# PROBLEM-URL: http://www.speedfind.de/cgi-bin/search?q=foo&t=STANDARD -.speedfind.de -#MASTER# PROBLEM-URL: http://www.nytimes.com/ -.nytimes.com -#MASTER# REMARKS: Yahoo logout URL after first redirect. fk 2007-01-19 -#MASTER# REMARKS: Logout fails if we fast-redirect to the URL after "done=". -#MASTER# REMARKS: Reported in support request #1635354. -# URL = http://login.yahoo.com/config/login?logout=1&.done=http://mail.yahoo.com&.s… -.yahoo.com/.*done=http -#MASTER# REMARKS: Reported in support request #1802365. -# URL = http://us.rd.yahoo.com/reg/login1/lisu/login/uk/ym/*http://edit.europe.yaho… onfig/login?.tries=1&.src=ym&.md5=&.hash=&.js=1&.last=&...kP=Y&.done=http://mail .yahoo.com&.pd=ym_ver=0&c=&login=XXX&passwd=XXX&.persistent =&.hash=1&.md5=1 -.rd.yahoo.com/reg/login1/ -# URL = http://validator.w3.org/check -.w3.org -#MASTER# PROBLEM-URL: http://www.ask.com/ -.directhit.com -#MASTER# PROBLEM-URL: http://www.zagats.com/ -.zagats.com -#MASTER# PROBLEM-URL: http://www.passport.com/Consumer/default.asp?lc=1033 -#MASTER# PROBLEM-URL: http://www.msn.com/ -# URL = http://www.passport.com/Consumer/default.asp?lc=1033&msppchlg=1&mspplogin= -my.msn.com/passport/pp(consent|set)\.ashx\?msnru= -www.passport.com/Consumer/default\.asp\?lc=[0-9]+&msppchlg=[01]&mspplogin= -login.passport.com/logout\.(asp|srf)\? -#MASTER# PROBLEM-URL: http://www.fileplanet.com -download.com.com/redir\? -www.fileplanet.com/redir\.asp\? -#MASTER# PROBLEM-URL: http://cyber.law.harvard.edu/filtering/china/test/ -.edu -#MASTER# PROBLEM-URL: http://web.archive.org -# URL = http://web.archive.org/web/19970715180251/http://www.gmd.de/ -.archive.org -# URL = http://www.guenstiger.de/gt/link.asp?url=http://www.edv-supermarkt.de&sourc… -www.guenstiger.de -# URL = http://anon.free.anonymizer.com/http://www.privoxy.org/ -.anonymizer.com -# URL = http://www.mailtothefuture.com/public/logon?http://www.mailtothefuture.com/ -www.mailtothefuture.com -#MASTER# PROBLEM-URL: http://support.microsoft.com/default.aspx?scid=KB;en-us;q219110 -support.microsoft.com/ -# URL = http://www.alexa.com/data/details/traffic_details?q=blogspot&url=http://www… -.alexa.com -# URL = http://www.translate.ru/url/tran_url.asp?lang=es&url=http%3A%2F%2Fos2progg.… -www.translate.ru/url/ -# URL = http://schneegans.de/sv/?url=http%3A%2F%2Fwww.freebsd.org%2F&schema=%28Dete… -schneegans.de/ -# URL = http://config.privoxy.org/edit-actions-submit?f=user..&redirect_mode=http%3… -config.privoxy.org/ -# URL = http://users.wsj.com/lmda/do/checkLogin?mg=evo-wsj&url=http%3A%2F%2Fonline.… -.wsj.com/lmda/do/checkLogin -#MASTER# REMARKS: As we already have five other PROBLEM-URLs that contain '?url=', -#MASTER# REMARKS: it might make sense to allow '/.*?url=' in general -# URL = http://del.icio.us/url/check?url=http%3A%2F%2Fwww.privoxy.org -del.icio.us/ -# URL = http://calgary.ctv.ca/servlet/RTGAMArticleHTMLTemplate/B/20070615/goexpo?br… -.ctv.ca/.*&site_cfcn=http:// -# URL = http://memberservices.informit.com/checkLogin.ashx?partner=8&r=http%3a%2f%2… -.informit.com/.*&r=http%3a%2f%2f -# URL = http://access.adobe.com/access/getStatus.do?jobid=&srcPdfUrl=http://cups.cs… -access.adobe.com/access/getStatus.do\?jobid=&srcPdfUrl= -# URL = http://view.samurajdata.se/ps.php?url=http%3A%2F%2Fcups.cs.cmu.edu%2Fsoups%… -view.samurajdata.se/ps\.php\?url= -# URL = http://www.blogger.com/navbar.g?targetBlogID=8919860543765866292&blogName=K… -.blogger.com/navbar\.g -# URL = http://editors.dmoz.org/editors/editurl.cgi?url=http%3a//www.example.de/&ca… -.dmoz.org/editors/editurl\.cgi -# URL = http://offer.ebay.de/ws/eBayISAPI.dll?stockphotourl=http%3A%2F%2Fi16.ebayim… -# URL = http://offer.ebay.de/ws/eBayISAPI.dll?maxbid=15%2C01&MfcISAPICommand=MakeBi… -.ebay.de/ws/eBayISAPI\.dll\? -#MASTER# REMARKS: While this is a redirect, the token isn't part of the URL redirected to. -# URL = http://www.amazon.com/gp/redirect.html/ref=cm_plog_item_link/105-3659773-08… -.amazon.com/gp/redirect.html/.*location.*&token -# URL = http://en.groundspring.org/EmailNow/pub.php?module=WebSignup&cmd=thankyou&g… -.groundspring.org/ -# URL = http://www1.landsend.de/pp/undefined/images/error.gif?onerr=true&ts=1227969… -.landsend.de/ -# URL = http://www.youtube.com/swf/l.swf?swf=http%3A//s.ytimg.com/yt/swf/cps-vfl689… -.youtube.com/swf/.*swf= - -#---------------------------------------------------------------------------- -# No filtering for sourcecode or other automatically parsed content -#---------------------------------------------------------------------------- -{-filter -prevent-compression} -# Sticky Actions = -filter -prevent-compression -# URL = http://ijbswa.cvs.sourceforge.net/ijbswa/current/ -.cvs. -/.*(cvs(view|web)|viewcvs) -#MASTER# REMARKS: The same for Subversion -# URL = http://svn.sourceforge.net/ -.svn. -.websvn. -/(.*/)?svn/ -#MASTER# REMARKS: Jeez, could you please stay with one of them? -# URL = http://liveupdate.symantec.com/ennlu.x86 -liveupdate.symantec.com -liveupdate.liveupdatesymantec.com -liveupdate.symantecliveupdate.com -# URL = http://www.bookmarklets.com/ -.bookmarklets.com -# URL = http://www.squarefree.com/bookmarklets/ -.squarefree.com/bookmarklets/ -#MASTER# REMARKS: Used by Mac OSX's automatic software update feature -swquery.apple.com -swscan.apple.com -#MASTER# REMARKS: These are various US DSL speed tests sites, where MIME is wrong -# URL = http://atl.speakeasy.net/300k -.speakeasy.net/\d+k -# URL = http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=185033 -.debian.org -#MASTER# DONT-VERIFY -#MASTER# REMARKS: Popular bug-tracking system - likely to contain code -bugzilla. -.tldp.org -#MASTER# REMARKS: mail should not be filtered 09/18/06 -webmail. -#MASTER# REMARKS: all the world is wikified 09/02/06. Generic wiki un-filterers. -.wiki*. -.*wiki. -/.*wiki/ -#MASTER# REMARKS Actionsfile feedback item #2299717 2008-11-16 -# URL = http://en.wiktionary.org/ -.wiktionary.org/ -#MASTER# REMARKS: protect some google projects from accidental JS/HTML tampering, etc -maps.google. -.google.com/(calendar|reader) -#MASTER# REMARKS: A lot of code and docs on these sites: -code. -developer. -.mozdev.org -.mozilla.org -.perl.org -.cpan.org -.webdeveloper.com -.ibm.com/developerworks -.apache.org/docs -.comptechdoc.org -.webmonkey.com -.webreference.com -docs.sun.com -java.sun.com -.thescripts.com -.php.net -.phpdeveloper.org -.oreillynet.com/pub -.devshed.com -.htmlgoodies.com -.javascript.com -javascript.internet.com -.w3schools.com -.devguru.com -javascriptkit.com -.xulplanet.com -.perl.com/language/newdocs -.freebsd.org -.watson.org -.netbsd.org -.openbsd.org -.dragonflybsd.org -.freedesktop.org -.gnu.org -.fedoraproject.org -.userscripts.org -#MASTER# REMARKS: Bug trackers like Flyspray and Mailinglist interfaces like Mailman: -/(.*/)?flyspray/ -/(.*/)?mail(man|archive|inglists?)/ -bugs. -#MASTER# REMARKS: Actionsfile tracker 1555909 09/17/06, various problems with cpu and logging in. -quoka.de - -#---------------------------------------------------------------------------- -# Innocent images in standard banner sizes found here: -#---------------------------------------------------------------------------- -{-filter{banners-by-size}} -# Sticky Actions = -filter{banners-by-size} -# URL = http://www.pricegrabber.com/search_getprod.php?masterid=580330&zip_code=928… -.pricegrabber.com/search_getprod.php -#MASTER# REMARKS: URL-based filtering is enough here. 120x90 content images -# URL = http://www.cnn.com/WORLD/ -.cnn.com -#MASTER# REMARKS: 120x90 content images -# URL = http://gamespot.com/gamespot/filters/0,10850,6013054,00.html -.gamespot.com/gamespot -#MASTER# PROBLEM-URL: http://www.wral.com/ 10/14/06 -www.wral.com -#MASTER# PROBLEM-URL: http://www.cartoonnetwork.com/ 10/15/06 -.cartoonnetwork.com/ -# URL = http://www.anybrowser.org/campaign/ -.anybrowser.org -# URL = http://images.google.de/images?q=cookie+monster&svnum=10&hl=de&lr=&ie=UTF-8… -images.google. -# URL = http://www.pbs.org/wgbh/pages/roadshow/series/highlights/2003/albuquerque/i… -.pbs.org/.*/roadshow/ -# URL = http://objects.povworld.org/cat/Food/ -objects.povworld.org/cat/ -# URL = http://www.xach.com/gimp/tutorials/tiles.html -www.xach.com/gimp/ -#MASTER# REMARKS: The destination map at the bottom of the page. -# URL = http://www.mapquest.com/directions/main.adp?go=1&do=nw&ct=NA&1y=US&1a=255+w… -.mapquest.com/directions/ -#MASTER# PROBLEM-URL: http://www.theonion.com/ 10/15/06 -#MASTER# REMARKS: A nasty "premercial" ad is required to enter this site. -.theonion.com/content/ -# URL = http://www.pattilupone.net/gallery.html -.pattilupone.net/gallery.html -# URL = http://www.ambrosiasw.com/games/evn/desktops.html -.ambrosiasw.com/ -# URL = http://oca.microsoft.com/en/Welcome.asp -.microsoft.com -# URL = http://javabog.dk/ijk/ -javabog.dk/ijk/ -#MASTER# REMARK: Per Debian bug report #319025 09/09/06 -.w3.org -# URL = http://www.encyclopediadramatica.com/New_Zealand_Fail_Guy -.encyclopediadramatica.com/ -# URL = http://www.ikea.com/us/en/catalog/products/00103102 -.ikea.com/ -# URL = http://www.froscon.de/en/projects.html -.froscon.de/ -# URL = http://www.fsfe.org/en/supporters -.fsfe.org/ -# URL = http://www.couchsurfing.com/mapsurf.html -.couchsurfing.com/ - -{-filter{banners-by-link}} -# Sticky Actions = -filter{banners-by-link} -# URL = http://www.encyclopediadramatica.com/Advertisement -.encyclopediadramatica.com/ - -#---------------------------------------------------------------------------- -# These don't work without the referrer information: -#---------------------------------------------------------------------------- -{-hide-referrer} -# Sticky Actions = -hide-referrer -#MASTER# REMARKS: This section NOT checked 10/18/06 HB -#MASTER# REMARKS: These are movie clips, linked from http://us.imdb.com -.totaleclips.com -#MASTER# REMARKS: Link to download page breaks -# URL = http://www.mandrakelinux.com/en/ftp.php3 -.mandrakelinux.com/en/ftp.php3 -#MASTER# REMARKS: Actions Tracker 1313157 -# URL = http://validator.w3.org/check?uri=referer -validator.w3.org/check\?uri=referer -#MASTER# REMARKS: Fixes Debian Bug #250407 -# URL = http://www.petitiononline.com/mod_perl/signed.cgi -.petitiononline.com/mod_perl/signed.cgi -#MASTER# REMARKS: Tracker bug report 1107806 09/26/06 -.telia.se -#MASTER# REMARKS: XML validator that actually works. -# URL = schneegans.de/sv/?url=referer -schneegans.de/sv/\?url=referer - -#---------------------------------------------------------------------------- -# These animated gifs are either useful or nice: -#---------------------------------------------------------------------------- -{-deanimate-gifs} -# Sticky Actions = -deanimate-gifs -#MASTER# REMARKS: Wanted animations on ecards -#MASTER# REMARKS: Leaving 10/18/06 though most animated seem flash now. -# URL = http://www.care2.com/ -.care2.com -.care-mail.com -#MASTER# PROBLEM-URL: http://weather.chicagotribune.com/radar/station.asp?ID=LOT19&type=loop -#MASTER# REMARKS: These are weather radar images. 10/18/06 -# URL = http://www.wunderground.com/radar/station.asp?ID=MPX19&type=loop&clutter=1 -.wunderground.com -66.28.250.180/data/ -#MASTER# PROBLEM-URL: http://www.teamquest.com/html/gunther/laquiz.shtml -.teamquest.com/gifs/gunther/ -#MASTER# REMARKS: 09/12/06 Art site, and ad-free -.rubberslug.com -#MASTER# REMARKS: Actionsfile feedback item #2040467, allow animated gifs from wikipedia.org -.wikipedia.org/ - -#---------------------------------------------------------------------------- -# The "site-specifics" filter has special cures for problems found here: -#---------------------------------------------------------------------------- -#MASTER# REMARKS: This section NOT checked 10/15/06 HB. -{+filter{site-specifics}} -# Sticky Actions = +filter{site-specifics} -# URL = http://www.spiegel.de/static/js/flash-plugin.js -.spiegel.de/static/js/flash-plugin\.js -# URL = http://www.quelle-bausparkasse.de/ -.quelle-bausparkasse.de/$ -# URL = http://de.groups.yahoo.com/group/die-spinner/interrupt?st=2&ln=die-spinner&… -.groups.yahoo.com/group/ -# URL = http://www.nytimes.com/ -.nytimes.com/ - -#---------------------------------------------------------------------------- -# Content under these TLDs is most probably in character sets which the -# demoronizer filter would mess up -#---------------------------------------------------------------------------- -{-filter{demoronizer}} -.jp -.cn -.tw -.ru -.kr - -#---------------------------------------------------------------------------- -# Misc special rules: -#---------------------------------------------------------------------------- -{-filter{content-cookies} -filter{webbugs}} -# Sticky Actions = -filter{content-cookies} -filter{webbugs} -#MASTER# REMARKS: Needs content-cookies for cookie test on index page; needs webbugs for storing profile(!) -# URL = http://www.friendscout24.de/ -.friendscout24.de -#MASTER# REMARKS: Explains how content cookies work -# URL = http://www.webreference.com/js/column8/property.html -.webreference.com/js/column8/property.html - -{-filter{fun}} -# Sticky Actions = -filter{fun} -#MASTER# REMARKS: Don't change the filter code with itself ;-) -# URL = http://www.privoxy.org/user-manual/filter-file.html -/(.*/)?user-manual/filter-file.html - -#{+filter{img-reorder} +filter{banners-by-link}} -#MASTER# REMARKS: Temporarily decommissioning 10/15/06. Violates Cautious no filter policy. HB -#MASTER# PROBLEM-URL: http://www.dn.se/ -#MASTER# REMARKS: Can't catch by size or location -#www.dn.se - -{-filter{img-reorder}} -# Sticky Actions = -filter{img-reorder} -#MASTER# REMARKS: Google images don't show up with img-reorder on -#MASTER# REMARKS: Also images on finance.google.com 09/25/06 -# URL = http://images.google.com -.google. -#MASTER# PROBLEM-URL: http://wired.com 09/23/06 -# URL = http://wired.com -/.*wired(\.com)?/ -.wired.com/ - -{-filter{js-annoyances}} -# Sticky Actions = -filter{js-annoyances} -#MASTER# REMARKS: No progress past main page without js-annoyances -# URL = http://www.nasa.gov -.nasa.gov -#MASTER# REMARKS: Exclude per Debian bug report #377843 -# URL = http://www2.cnrs.fr/presse/communique/900.htm -.cnrs.fr -#MASTER# REMARKS: Exclude per Debian bug report #377843 -# URL = http://blogs.msdn.com/wga/archive/2006/07/16/667063.aspx -blogs.msdn.com - -{-filter{unsolicited-popups}} -# Sticky Actions = -filter{unsolicited-popups} -#MASTER# REMARKS: Breaks Movable Type's admin interface (http://www.movabletype.org/) -/.*mt.cgi$ -#MASTER# REMARKS: Exclude per Debian bug report #377843 09/17/06 -# URL = http://www2.cnrs.fr/presse/communique/900.htm -.cnrs.fr -#MASTER# REMARKS: Exclude per Debian bug report #377843 09/17/06 -# URL = http://blogs.msdn.com/wga/archive/2006/07/16/667063.aspx -blogs.msdn.com - -{+fast-redirects{check-decoded-url} -block} -# Sticky Actions = +fast-redirects{check-decoded-url} -block -#MASTER# REMARKS: Yahoo search results. Added 2007-01-19 fk -#MASTER# REDIRECT-REFERRER: http://search.yahoo.com/search?p=privoxy -# URL = http://rds.yahoo.com/_ylt=A0geuryczbBF._YAEmxXNyoA;_ylu=X3oDMTB2b2gzdDdtBGN… -rds.yahoo.com/ -#MASTER# COMMENTS: Verified 2007-01-19 fk -#MASTER# REDIRECT-REFERRER: http://www.gamefaqs.com/computer/doswin/game/914819.html -# URL = http://dw.com.com/redir?asid=0&astid=8&siteid=19&edid=107&destCat=33862&des… -dw.com.com/ -#MASTER# REMARKS: Action tracker 1593393. Added 2007-01-20. -# URL = http://wzus.bloglines.com/r?t=a&d=us&s=bl&c=blen&ti=1&ai=51060&l=dir&o=0&sv… -.bloglines.com/r\? -www.skweezer.net/bloglines -# URL = http://media.fastclick.net/w/get.media?sid=4681&m=5&tp=6&url=http%3A//www.s… -.fastclick.net/w/get\.media\? - -{+block{Looks like an anti-leech trigger URL.}} -#MASTER# COMMENTS: This section not checked 10/17/06 HB. Still out there? -#MASTER# PROBLEM-URL: http://www.anti-leech.com/theft_example.html -#MASTER# REMARKS: Lame attempt at banning ad-blockers. Used by other websites as well. -/antitheft\.php - -{ +prevent-compression } -.compusa.com/ - -{+filter{tiny-textforms}} -.sourceforge.net/tracker - -{+downgrade-http-version} -#MASTER# COMMENTS: This section not checked 10/17/06 HB -#MASTER# REMARKS: This is work-around for CUPS http configuration. -:631 - -#MASTER# REMARKS: If Privoxy is disabled, requests for config.privoxy.org/ -#MASTER# REMARKS: reach privoxy.org and are redirected to privoxy.org/config. -#MASTER# REMARKS: The instructions tell the user to reload the page with -#MASTER# REMARKS: Privoxy enabled to reach the configuration webinterface, -#MASTER# REMARKS: to make this work we have to intercept the request and revert -#MASTER# REMARKS: the redirection. -{+redirect{http://config.privoxy.org/}} -# Sticky Actions = +redirect{http://config.privoxy.org/} -# URL = http://www.privoxy.org/config -.privoxy.org/config - -#MASTER# REMARKS: Privoxy's "unsafe" CGI pages check the referrer -#MASTER# REMARKS: to make sure the user reached them intentionally. -#MASTER# REMARKS: Disabling hide-referrer so there's a referrer left to check. -#MASTER# REMARKS: Disabling fast-redirects because if CGI crunching gets -#MASTER# REMARKS: enabled it could be leveraged to fool the referrer check. -{-hide-referrer -fast-redirects} -# Sticky Actions = -hide-referrer -fast-redirects -# URL = http://p.p -# URL = http://config.privoxy.org -p.p/ -config.privoxy.org/ - -#MASTER# REMARKS: Yahoo logout URLs need special treatment, -#MASTER# REMARKS: the URL after "done=" is no fast-redirect. 2007-01-19 fk -#MASTER# REMARKS: Reported in support request #1635354. -{-fast-redirects +redirect{s@^.*\*(http://login\.yahoo\.com/.*)$@$1@i}} -# XXX: Privoxy-Regression-Test currently doesn't allow backslashes. -# Sticky Actions = -fast-redirects +redirect -# URL = http://us.ard.yahoo.com/SIG=AAAAAAAAA/M=NNNNNN.NNNNNNN.NNNNNNN.NNNNNNN/D=ma… -.yahoo./.*http://login.yahoo.com/config/login.*http:// - -#---------------------------------------------------------------------------- -# Sections that modify the action settings based on tags. -#---------------------------------------------------------------------------- - -############################################################################# -# Depends on +client-header-tagger{image-requests} -############################################################################# -{-handle-as-empty-document \ - +handle-as-image \ -} -TAG:^IMAGE-REQUEST$ - -############################################################################# -# Depends on +client-header-tagger{css-requests} -############################################################################# -{+handle-as-empty-document \ - -handle-as-image \ -} -TAG:^CSS-REQUEST$ - -#MASTER# set vi:nowrap diff --git a/external/privoxy/default.filter b/external/privoxy/default.filter deleted file mode 100644 index 3537c7b..0000000 --- a/external/privoxy/default.filter +++ /dev/null @@ -1,1289 +0,0 @@ -# ******************************************************************** -# -# File : $Source: /cvsroot/ijbswa/current/default.filter,v $ -# -# $Id: default.filter,v 1.71 2009/03/01 18:33:17 ler762 Exp $ -# -# Purpose : Rules to process the content of web pages -# -# Copyright : Written by and Copyright (C) 2001-2009 the -# Privoxy team. http://www.privoxy.org/ -# -# We value your feedback. However, to provide you with the best support, -# please note: -# -# * Use the support forum to get help: -# http://sourceforge.net/tracker/?group_id=11118&atid=211118 -# * Submit bugs only thru our bug forum: -# http://sourceforge.net/tracker/?group_id=11118&atid=111118 -# Make sure that the bug has not already been submitted. Please try -# to verify that it is a Privoxy bug, and not a browser or site -# bug first. If you are using your own custom configuration, please -# try the stock configs to see if the problem is a configuration -# related bug. And if not using the latest development snapshot, -# please try the latest one. Or even better, CVS sources. -# * Submit feature requests only thru our feature request forum: -# http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse -# -# For any other issues, feel free to use the mailing lists: -# http://sourceforge.net/mail/?group_id=11118 -# -# Anyone interested in actively participating in development and related -# discussions can join the appropriate mailing list here: -# http://sourceforge.net/mail/?group_id=11118. Archives are available -# here too. -# -################################################################################# -# -# Syntax: -# -# Generally filters start with a line like "FILTER: name description". -# They are then referrable from the actionsfile with +filter{name} -# -# FILTER marks a filter as content filter, other filter -# types are CLIENT-HEADER-FILTER, CLIENT-HEADER-TAGGER, -# SERVER-HEADER-FILTER and SERVER-HEADER-TAGGER. -# -# Inside the filters, write one Perl-Style substitution (job) per line. -# Jobs that precede the first FILTER: line are ignored. -# -# For Details see the pcrs manpage contained in this distribution. -# (and the perlre, perlop and pcre manpages) -# -# Note that you are free to choose the delimiter as you see fit. -# -# Note2: In addition to the Perl options gimsx, the following nonstandard -# options are supported: -# -# 'U' turns the default to ungreedy matching. Add ? to quantifiers to -# switch back to greedy. -# -# 'T' (trivial) prevents parsing for backreferences in the substitute. -# Use if you want to include text like '$&' in your substitute without -# quoting. -# -# 'D' (Dynamic) allows the use of variables. Supported variables are: -# $host, $origin (the IP address the request came from), $path and $url. -# -# Note that '$' is a bad choice as delimiter for dynamic filters as you -# might end up with unintended variables if you use a variable name -# directly after the delimiter. Variables will be resolved without -# escaping anything, therefore you also have to be careful not to chose -# delimiters that appear in the replacement text. For example '<' should -# be save, while '?' will sooner or later cause conflicts with $url. -# -################################################################################# - - -################################################################################# -# -# js-annoyances: Get rid of particularly annoying JavaScript abuse. -# -################################################################################# -FILTER: js-annoyances Get rid of particularly annoying JavaScript abuse. - -# Note: Most of these jobs would be safer if restricted to a -# <script> context as in: -# -# s/(<script.*)nasty-item(?=.*<\/script>)/$1replacement/sigU -# -# but that would make them match only the first occurrence of -# nasty-item in each <script>. We need nestable jobs! - -# Get rid of Javascript referrer tracking. -# Test page: http://www.javascript-page.com/referrer.html -# -s|(?:\w+\.)+referrer|"Not Your Business!"|gisU - -# The status bar is for displaying link targets, not pointless blahblah -# -s@([\W]\s*)((?:this|window)\.(?:default)?status)\s*=\s*((['"]).*?\4)@$1$2 =\ - (typeof(this.href) != 'undefined')?($3 + ' URL: ' + this.href):($2)@ig - -s/(?:(?:this|window)\.(?:default)?status)\s*=\s*\w*\s*;//ig - -# Kill OnUnload popups. Yummy. -# Test: http://www.zdnet.com/zdsubs/yahoo/tree/yfs.html -# -s/(<body\s+[^>]*)onunload/$1never/siU -s|(<script.*)window\.onunload(?=.*</script>)|$1never|sigU - -# If we allow window.open, we want normal window features: -# Test: http://www.htmlgoodies.com/beyond/notitle.html -# -s/(open\s*$[^$]+resizable=)(["']?)(?:no|0)\2/$1$2yes$2/sigU -s/(open\s*$[^$]+location=)(["']?)(?:no|0)\2/$1$2yes$2/sigU -s/(open\s*$[^$]+status=)(["']?)(?:no|0)\2/$1$2yes$2/sigU -s/(open\s*$[^$]+scroll(?:ing|bars)=)(["']?)(?:no|0)\2/$1$2auto$2/sigU -s/(open\s*$[^$]+menubar=)(["']?)(?:no|0)\2/$1$2yes$2/sigU -s/(open\s*$[^$]+toolbar=)(["']?)(?:no|0)\2/$1$2yes$2/sigU -s/(open\s*$[^$]+directories=)(["']?)(?:no|0)\2/$1$2yes$2/sigU -s/(open\s*$[^$]+fullscreen=)(["']?)(?:yes|1)\2/$1$2no$2/sigU -s/(open\s*$[^$]+always(?:raised|lowered)=)(["']?)(?:yes|1)\2/$1$2no$2/sigU -s/(open\s*$[^$]+z-?lock=)(["']?)(?:yes|1)\2/$1$2no$2/sigU -s/(open\s*$[^$]+hotkeys=)(["']?)(?:yes|1)\2/$1$2no$2/sigU -s/(open\s*$[^$]+titlebar=)(["']?)(?:no|0)\2/$1$2yes$2/sigU -s/(open\s*$[^$]+always(?:raised|lowered)=)(["']?)(?:yes|1)\2/$1$2no$2/sigU - - -################################################################################# -# -# js-events: Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites). -# -################################################################################# -FILTER: js-events Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites). - -s/(on|event\.)((mouse(over|out|down|up|move))|(un)?load|contextmenu|selectstart)/never/ig -# Not events, but abused on the same type of sites: -s/(alert|confirm)\s*\(/concat(/ig -s/settimeout\(/concat(/ig - -################################################################################# -# -# html-annoyances: Get rid of particularly annoying HTML abuse. -# -################################################################################# -FILTER: html-annoyances Get rid of particularly annoying HTML abuse. - -# New browser windows (if allowed -- see no-popups filter below) should be -# resizeable and have a location and status bar -# -s/(<a\s+href[^>]+resizable=)(['"]?)(?:no|0)\2/$1$2yes$2/igU -s/(<a\s+href[^>]+location=)(['"]?)(?:no|0)\2/$1$2yes$2/igU -s/(<a\s+href[^>]+status=)(['"]?)(?:no|0)\2/$1$2yes1$2/igU -s/(<a\s+href[^>]+scrolling=)(['"]?)(?:no|0)\2/$1$2auto$2/igU -s/(<a\s+href[^>]+menubar=)(['"]?)(?:no|0)\2/$1$2yes$2/igU - -# The <BLINK> and <MARQUEE> tags were crimes! -# -s-</?(blink|marquee).*>--sigU - - -################################################################################# -# -# content-cookies: Kill cookies that come in the HTML or JS content. -# -################################################################################# -FILTER: content-cookies Kill cookies that come in the HTML or JS content. - -# JS cookies, except those used by antiadbuster.com to detect us: -# -s|(\w+\.)+cookie(?=[ \t\r\n]*=)(?!='aab)|ZappedCookie|ig - -# HTML cookies: -# -s|<meta\s+http-equiv=['"]?set-cookie.*>||igU - - -################################################################################# -# -# refresh-tags: Kill automatic refresh tags (for dial-on-demand setups). -# -################################################################################# -FILTER: refresh-tags Kill automatic refresh tags (for dial-on-demand setups). - -# Note: Only deactivates refreshes with more than 9 seconds delay to -# preserve monster-stupid but common redirections via meta tags. -# -s/<meta\s+http-equiv\s*=\s*(['"]?)refresh\1\s+content\s*=\s*(['"]?)\d{2,}\s*(;\s*url\s*=\s*([^>\2]*))?\2/<link rev="x-refresh" href="$4"/iU - - -################################################################################# -# -# unsolicited-popups: Disable unsolicited pop-up windows. -# -################################################################################# -FILTER: unsolicited-popups Disable only unsolicited pop-up windows. - -s+([^'"]\s*<head.*>)(?=\s*[^'"])+$1<script>function PrivoxyWindowOpen(){return(null);}</script>+isU -s@([^\w\s.]\s*)((?:map)?(window|this|parent)\.?)?open\s*\(@$1PrivoxyWindowOpen(@ig -s+([^'"]\s*</html>)(?!\s*(\\n|'|"))+$1<script>function PrivoxyWindowOpen(a, b, c){return(window.open(a, b, c));}</script>+iU - - -################################################################################## -# -# all-popups: Kill all popups in JavaScript and HTML. -# -################################################################################# -FILTER: all-popups Kill all popups in JavaScript and HTML. - -s@((\W\s*)(?:map)?(window|this|parent)\.?)open\s*\\?\(@$1concat(@ig # JavaScript -#s/\starget\s*=\s*(['"]?)_?(blank|new)\1?/ notarget/ig # HTML -s/\starget\s*=\s*(['"]?)_?(blank|new)\1?/ /ig # (X)HTML - -################################################################################## -# -# img-reorder: Reorder attributes in <img> tags to make the banners-by-* filters more effective. -# -################################################################################# -FILTER: img-reorder Reorder attributes in <img> tags to make the banners-by-* filters more effective. - -# In the first step src is moved to the start, then width is moved to the second -# place to guarantee an order of src, width, height. Also does some white-space -# normalization. -# -# This makes banners-by-size more effective and allows both banners-by-size -# and banners-by-link to preserve the original image URL in the title attribute. - -s|<img\s+?([^>]*)\ssrc\s*=\s*(['"])([^>\\\2]+)\2|<img src=$2$3$2 $1|siUg -s|<img\s+?([^>]*)\ssrc\s*=\s*([^'">\\\s]+)|<img src=$2 $1|sig -s|(<img[^>]+height)\s*=\s*|$1=|sig - -s|<img (src=(?:(['"])[^>\\\\2]*\2\|[^'">\\\s]+?))([^>]*)\s+width\s*=\s*((["']?)\d+?\5)(?=[\s>])|<img $1 width=$4$3|siUg - - -################################################################################# -# -# banners-by-size: Kill banners by size. -# -################################################################################# -# -# Standard banner sizes taken from http://www.iab.net/iab_banner_standards/bannersizes.html -# -# Note: Use http://config.privoxy.org/send-banner?type=trans for a transparent 1x1 image -# Use http://config.privoxy.org/send-banner?type=pattern for a grey/white pattern image -# Use http://config.privoxy.org/send-banner?type=auto to auto-select. -# -# Note2: Use img-reorder before this filter to ensure maximum matching success -# -################################################################################# -FILTER: banners-by-size Kill banners by size. - -# 88*31 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)88\4)[^>]*?(height=(['"]?)31\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 120*60, 120*90, 120*240, 120*600 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)120\4)[^>]*?(height=(['"]?)(?:600?|90|240)\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 125*125 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)125\4)[^>]*?(height=(['"]?)125\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 160*600 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)160\4)[^>]*?(height=(['"]?)600\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 180*150 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)180\4)[^>]*?(height=(['"]?)150\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 234*60, 468*60 (Most Banners!) -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)(?:234|468)\4)[^>]*?(height=(['"]?)60\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 240*400 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)240\4)[^>]*?(height=(['"]?)400\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 250*250, 300*250 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)(?:250|300)\4)[^>]*?(height=(['"]?)250\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig -# 336*280 -s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)336\4)[^>]*?(height=(['"]?)280\6)[^>]*?(?=/?>)@\ - <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig - -# Note: 200*50 was also proposed, but it probably causes too much collateral damage: -# -#s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)200\4)[^>]*?(height=(['"]?)50\6)[^>]*?(?=/?>)@\ -# <img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-$2-by-size" $3 $5@sig - - -################################################################################# -# -# banners-by-link: Kill banners by their links to known clicktrackers (Experimental). -# -################################################################################# -FILTER: banners-by-link Kill banners by their links to known clicktrackers. - -# Common case with width and height attributes: -# -s@<a\s+href\s*=\s*(['"]?)([^>\1\s]*?(?:\ - adclick # See www.dn.se \ -| advert # see dict.leo.org \ -| atwola\.com/(?:link|redir) # see www.cnn.com \ -| doubleclick\.net/jump/ # redirs for doublecklick.net ads \ -| counter # common \ -| (?<!&type=)tracker # (&type=tracker is used in sf's project statistics) \ -| adlog\.pl # see sf.net \ -)[^>\1\s]*)\1[^>]*>\s*<img\s+(?:src\s*=\s*(['"]?)([^>\\\3\s]+)\3)?[^>]*((?:width|height)\s*=\s*(['"]?)\d+?\6)[^>]*((?:width|height)\s*=\s*(['"]?)\d+?\8)[^>]*?(?=/?>)\ -@<img $5 $7 src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed $4 by link to $2"@sigx - -# Rare case w/o explicit dimensions: -# -s@<a\s+href\s*=\s*(['"]?)([^>\1\s]*?(?:ad(?:click|vert)|atwola\.com/(?:link|redir)|doubleclick\.net/jump/|(?<!&type=)tracker|counter|adlog\.pl)[^>\1\s]*)\1[^>]*>\s*<img\s+(?:src\s*=\s*(['"]?)([^>\\\3\s]+)\3)?[^>]*?(?=/?>)@<img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed $4 by link to $2"@sig - - -################################################################################ -# -# webbugs: Squish WebBugs (1x1 invisible GIFs used for user tracking). -# -################################################################################# -FILTER: webbugs Squish WebBugs (1x1 invisible GIFs used for user tracking). - -s@<img[^>]*\s(?:width|height)\s*=\s*['"]?[01](?=\D)[^>]*\s(?:width|height)\s*=\s*['"]?[01](?=\D)[^>]*?>@@siUg - - -################################################################################# -# -# tiny-textforms: Extend those tiny textareas up to 40x80 and kill the hard wrap. -# -################################################################################# -FILTER: tiny-textforms Extend those tiny textareas up to 40x80 and kill the hard wrap. - -s/(<textarea[^>]*?)(?:\s*(?:rows|cols)=(['"]?)\d+\2)+/$1 rows=$2\40$2 cols=$2\80$2/ig -s/(<textarea[^>]*?)wrap=(['"]?)hard\2/$1/ig - - -################################################################################# -# -# jumping-windows: Prevent windows from resizing and moving themselves. -# -################################################################################# -FILTER: jumping-windows Prevent windows from resizing and moving themselves. - -s/(?<=[\W])(?:window|this|self)\.(?:move|resize)(?:to|by)\(/''.concat(/ig - -################################################################################# -# -# frameset-borders: Give frames a border, make them resizable and scrollable. -# -################################################################################# -FILTER: frameset-borders Give frames a border and make them resizable. - -s/(<frameset\s+[^>]*)framespacing=(['"]?)(no|0)\2/$1/igU -s/(<frameset\s+[^>]*)frameborder=(['"]?)(no|0)\2/$1/igU -s/(<frameset\s+[^>]*)border=(['"]?)(no|0)\2/$1/igU -s/(<frame\s+[^>]*)noresize/$1/igU -s/(<frame\s+[^>]*)frameborder=(['"]?)(no|0)\2/$1/igU -s/(<frame\s+[^>]*)scrolling=(['"]?)(no|0)\2/$1/igU - - - -################################################################################# -# -# demoronizer: Correct Microsoft's abuse of standardized character sets, which -# leave the browser to (mis)-interpret unknown characters, with -# sometimes bizarre results on non-MS platforms. -# -# credit: ripped from the demoroniser.pl script by: -# John Walker -- January 1998, http://www.fourmilab.ch/webtools/demoroniser -# -################################################################################# -FILTER: demoronizer Fix MS's non-standard use of standard charsets. - -s/(&\#[0-2]\d\d)\s/$1; /g -# per Robert Lynch: http://slate.msn.com//?id=2067547, just a guess. -# Must come before x94 below. -s/\xE2\x80\x94/ -- /g -s/\x82/,/g -#s-\x83-<em>f</em>-g -s/\x84/,,/g -s/\x85/.../g -#s/\x88/^/g -#s-\x89- °/°°-g -s/\x8B/</g -s/\x8C/Oe/g -s/\x91/`/g -s/\x92/'/g -s/(\x93|\x94)/"/g -# Bullet type character. -s/\x95/·/g -s/\x96/-/g -s/\x97/--/g -#s-\x98-<sup>~</sup>-g -#s-\x99-<sup>TM</sup>-g -# per Robert Lynch. -s/\x9B/>/g # 155 - - -################################################################################# -# -# shockwave-flash: Kill embedded Shockwave Flash objects. -# Note: Better just block "/.*\.swf$"! -# -################################################################################# -FILTER: shockwave-flash Kill embedded Shockwave Flash objects. - -s|<object [^>]*macromedia.*</object>||sigU -s|<embed [^>]*(application/x-shockwave-flash\|\.swf).*>(.*</embed>)?||sigU - - -################################################################################# -# -# quicktime-kioskmode: Make Quicktime movies saveable. -# -################################################################################# -FILTER: quicktime-kioskmode Make Quicktime movies saveable. - -s/(<embed\s+[^>]*)kioskmode\s*=\s*(["']?)true\2/$1/ig - - -################################################################################# -# -# fun: Text replacements for subversive browsing fun! -# -################################################################################# -FILTER: fun Text replacements for subversive browsing fun! - -# SCNR -# -s/microsoft(?!.[^\s])/MicroSuck/ig - -# Buzzword Bingo (example for extended regex syntax) -# -s* (?:industry|world)[ -]leading \ -| cutting[ -]edge \ -| customer[ -]focused \ -| market[ -]driven \ -| award[ -]winning # Comments are OK, too! \ -| high[ -]performance \ -| solutions[ -]based \ -| unmatched \ -| unparalleled \ -| unrivalled \ -*$0<sup><font color="red"><b>Bingo!</b></font></sup> \ -*igx - -# For Germans only -# -s/(M|m)edien(?![^<]*>)/$1ädchen/Ug - -################################################################################# -# -# crude-parental: Crude parental filtering. Use with a suitable blocklist. -# Pages are "blocked" based on keyword matching. -# -################################################################################# -FILTER: crude-parental Crude parental filtering. Note that this filter doesn't work reliably. - -# (Note: Middlesex, Sussex and Essex are counties in the UK, not rude words) -# (Note #2: Is 'sex' a rude word?!) - -s%^.*(?<!middle)(?<!sus)(?<!es)sex.*$%<html><head><title>Blocked</title></head><body>\ -<h3>Blocked by Privoxy's crude-parental filter due to possible adult content.</h3></body></html>%is - -s+^.*warez.*$+<html><head><title>No Warez</title></head><body><h3>You're not searching for illegal stuff, are you?</h3></body></html>+is - -# Remove by description -s/^.*\ -(?:(suck|lick|tongue|rub|fuck|fingering|finger|chicks?)\s*)?\ -(?:(her|your|my|hard|with|big|wet|tight|pink|hot|moist|young|teen)\s*)+\ -(dicks?|penis|cocks?|balls?|tits?|pussy|cunt|clit|ass|mouth).*$\ -/This page has been blocked by Privoxy's crude-parental content filter\ -/is - -#Remove by link text -s/^.*\ -(download|broadband|view|watch|free|get|extreem)?\s*\ -(sex|xxx|porn|cumshot|fuck(ing|s)?|anal|ass|asian|adult|Amateur|org(y|ies)|close ups?|hand?job|nail(ed)?)+\s*\ -(movies?|pics?|videos?|dvds?|dvd's|links?).*$\ -/This page has been blocked by Privoxy's crude-parental content filter\ -/is - -#Remove by age disclaimer -s/^.*\ -(models?|chicks?|girls?|women|persons)\s*\ -(who|are|were)+ (over|at least) (16|18|21) years (old|of age).*$\ -/This page has been blocked by Privoxy's crude-parental content filter\ -/is - -#Remove by regulations -s/^.*(Section 2257|18 U.?S.?C.? 2257).*$\ -/This page has been blocked by Privoxy's crude-parental content filter\ -/is - - -################################################################################# -# -# IE-Exploits: Disable some known Internet Explorer bug exploits. -# -################################################################################# -FILTER: ie-exploits Disable some known Internet Explorer bug exploits. - -# Note: This is basically a demo and waits for someone more interested in IE -# security (sic!) to take over. - -# Cross-site-scripting: -# -s%f$"javascript:location.replace\('mk:@MSITStore:C:'$"\);%alert$"This page looks like it tries to use a vulnerability described here:\n http://online.securityfocus.com/archive/1/298748/2002-11-02/2002-11-08/2"$;%siU - -# Address bar spoofing (http://www.secunia.com/advisories/10395/) -# -s/(<a[^>]*href[^>]*)(?:\x01|\x02|\x03|%0[012])@/$1MALICIOUS-LINK@/ig - -# Nimda: -# -s%<script language="JavaScript">(window\.open|1;''\.concat)$"readme\.eml", null, "resizable=no,top=6000,left=6000"$</script>%<br><font size="7"> WARNING: This Server is infected with <a href="http://www.cert.org/advisories/CA-2001-26.html">Nimda</a>!</font>%g - - -################################################################################# -# -# -# site-specifics: Cure for site-specific problems. Don't apply generally! -# -# Note: The fixes contained here are so specific to the problems of the -# particular web sites they are designed for that they would be a -# waste of CPU cycles (or even destructive!) on 99.9% of the web -# sites where they don't apply. -# -################################################################################# -FILTER: site-specifics Cure for site-specific problems. Don't apply generally! - -# www.spiegel.de excludes X11 users from viewing Flash5 objects - shame. -# Apply to: www.spiegel.de/static/js/flash-plugin.js -# -s/indexOf$"x11"$/indexOf("x13")/ - -# www.quelle-bausparkasse.de uses a very stupid redirect mechanism that -# relies on a webbug being present. Can we tolerate that? No! -# Apply to: www.quelle-bausparkasse.de/$ -# -s/mylogfunc()//g - -# groups.yahoo.com has splash pages that one needs to click through in -# order to access the actual messages. Let the browser do that. Thanks -# to Paul Jobson for this one: -# -s|<a href="(.+?)">(?:Continue to message\|Weiter zu Nachricht)</a>|<meta http-equiv="refresh" content="0; URL=$1">|ig - -# monster.com has two very similar gimmicks: -# -s|<input type="hidden" name="REDIRECT" value="(.+?)">|<meta http-equiv="refresh" content="0; URL=$1">|i - -s|<IMG SRC="http://media.monster.com/mm/usen/my/no_thanks_211x40.gif".+?>|<meta http-equiv="refresh" content="0; URL=http://my.monster.com/resume.asp">|i - -# nytimes.com triggers popups through the onload handler of dummy images -# to fool popup-blockers. -# -s|(<img [^>]*)onload|$1never|sig - -# Pre-check all the "Discard" buttons in GNU Mailman's web interface. -# (This saves a lot of mouse aiming practice when flushing spamtraps) -# -s|(<INPUT name="\d{2,4}" type="RADIO" value="0") CHECKED |$1|g -s|<INPUT name="\d{2,4}" type="RADIO" value="3" |$0 checked|g - -################################################################################# -# -# no-ping: Removes non-standard ping attributes in <a> and <area> tags. -# -################################################################################# -FILTER: no-ping Removes non-standard ping attributes in <a> and <area> tags. -s@(<a(?:rea)?[^>]*?)\sping=(['"]?)([^"'>]+)\2([>\s]?)@\ -<strong style="color:white; background-color:red;" title="Privoxy removed ping target '$3'">PING!</strong>\n$1$4@ig - -################################################################################# -# -# google: CSS-based block for Google text ads. Also removes -# a width limitation and the toolbar advertisement. -# -################################################################################# -FILTER: google CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement. - -s@</head>@<style type="text/css">\n\ - /* Style sheet inserted by Privoxy's google filter. */\n\ - \#fbc, \#fbl, \#ra, .rhh {visibility: hidden !important;}\n\ - \#tpa1,\#tpa2,\#tpa3,\#tpa4,\#tpa5,\#tpa5, \#spl, .ch, \#ads,\ - \#toolbar, \#google_ads_frame, \#mbEnd {display: none !important;}\n\ - .main_body, .j {width: 100%}\n</style>\n$0@ -s@<div style=\"padding-top:11px;min-width:500px\">@<div id="main_body">@ -s@(<table cellspacing=0 cellpadding=0 width=25% align=right bgcolor=\#ffffff border=0\ -|</font></td></tr></tbody></table><table align=\"right\" bgcolor=\"\#ffffff\"\ -|<table cellspacing=0 cellpadding=0 align=right bgcolor=\#ffffff border=0\ -|<table style=\"clear:both\" align=right width=25% cellspacing=\"0\" cellpadding=\"0\"\ - border=\"0\" bgcolor=\"\#ffffff\")@$0 id="ads"@ -s@(<br clear=all><table)( border=0 cellpadding=9><tr><td)@$1 id="toolbar"$2@ - -################################################################################# -# -# yahoo: CSS-based block for Yahoo text ads. Also removes a width limitation. -# -################################################################################# -FILTER: yahoo CSS-based block for Yahoo text ads. Also removes a width limitation. - -s@</head>@\n<style type="text/css">\n\ - /* Style sheet inserted by Privoxy's yahoo filter. */\n\ - \#symadbn, \#ymadbn, .yschbox, .yschhd, .bbox, \#yschsec, \#sec,\ - \#yschanswr, .yschftad, .yschspn, .yschspns, \#ygrp-sponsored-links,\ - \#nwad, \#MWA2, \#MSCM, \#yregad, \ - \#ks-ypn-ads, .ad, \#east, \#ygrp-vital {display: none !important;}\n\ - \#yschpri, \#yschweb, \#pri, \#web, \#main {width: 100% !important; max-width: 100% !important;}\n\ - \#yschqcon, \#yschtg {width: auto !important; /* No useless horizontal scrollbar please */}\n\ - \#composebox \#compose_editorArea {width: 70% !important; /* reasonably sized reply textarea please */\n\ - </style>\n$0\n@ - -s@(<textarea\s+id="composeArea"[^>]*)width:545px;@$1width:70%;@isU - -################################################################################# -# -# msn: CSS-based block for MSN text ads. Also removes tracking URLs -# and a width limitation. -# -################################################################################# -FILTER: msn CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation. - -s@</head>@<style type="text/css">\n\ - /* Style sheet inserted by Privoxy's msn filter. */\n\ - .msn_ads, \#at, \#ar, .mktmsg {display: none !important;}\n\ - \#results, .flank, .results_area_flank, .results_area_stroke,\n\ - \#results_area, .SearchSection, .not, .sc_rslth1\n\ -.content, \#sw_foot, \#bf, \#sw_content, \#sidebar, \#pag\n\ - {width: 99% !important; min-width: 99% !important;\n\ - max-width: 100% !important; /* width:100% sometimes causes horizontal scrollbars */}\n\ - /* Remove "suggestions". They are next to worthless but partly overlap with the search results */\n\ - .suggestion, \#nys_right, \#nys {clear: both; display:none;}\n\ - \#content {padding-right: 0;}\n\ - </style>\n$0@ -# Are these ids still in use? -s@(<div[^>]*) id=(["']?)ads_[^\2]*\2@$1 class="msn_ads"@Uig -s@(<div[^>]*) class=(["']?)sb_ads[^\2]*\2@$1 class="msn_ads"@Uig -s@(<a[^>]*href=\")http://g.msn.com/.*\?(http://.*)(&&DI=.*)(\")@$1$2$4@Ug -s@(<a[^>]*)gping=\".*\"@$1 title="URL cleaned up by Privoxy's msn filter"@Ug - -################################################################################# -# -# blogspot: Cleans up some Blogspot blogs. Read the fine print before using this. -# -# This filter also intentionally removes some navigation stuff and -# sets the page width to 100%. As a result, some rounded "corners" would -# appear to early or not at all and as fixing this would require a browser -# that understands background-size (CSS3), they are removed instead. -# -# When applied to feeds, it removes comment titles that -# only contain the beginning of the actual comment. -# -################################################################################# -FILTER: blogspot Cleans up some Blogspot blogs. Read the fine print before using this. - -s@</head>@<style type="text/css">\n\ - /* Style sheet inserted by Privoxy's blogspot filter. */\n\ - \#powered-by {display: none !important;}\n\ - \#wrap4, \#wrapper {margin-top: 0px }\n\ - \#blogheader, \#header {margin-top: 0.5em !important}\n\ - \#content {width: 98% }\n\ - \#main {width: 70% }\n\ - \#sidebar {width: 29% }\n\ - .post-body {overflow: auto;}\n\ - .blogComments {width: 100%; overflow: auto;}\n</style>\n$0@ -s@<body.*(?:<div id="space-for-ie"></div>|(<div id="(?:content|wrap4|wrapper)))@<body>\ - $1@Us -s@(<div style=\"[^\"]*width:)30em@$1 100%@ -s@background:url$\"http://www.blogblog.com/rounders[^\"]*\"$.*;@/*$0*/@Ug -s@(background:\#[a-f\d]{3})( url$\"http://www.blogblog.com/rounders[^\"]*\"$.*;)@$1 ;/*$2*/@Ug -# Do the feed filtering magic as described above. -s@<title(?:\s+type=\'text\')?>([^<]*)(?:\.\.\.)?\s*</title>\s*\ -(<content(?:\s+type=\'(?:html|text)\')?>\s*\1)@<title></title>$2@ig - -################################################################################# -# -# x-httpd-php-to-html: Changes the Content-Type header from -# x-httpd-php to html. "Content-Type: x-httpd-php" -# is set by clueless PHP users and causes many -# browsers do open a download menu instead of -# rendering the page. -# -################################################################################# -SERVER-HEADER-FILTER: x-httpd-php-to-html Changes the Content-Type header from x-httpd-php to html. - -s@^(Content-Type:)\s*application/x-httpd-php@$1 text/html@i - -################################################################################# -# -# html-to-xml: Changes the Content-Type header from html to xml. -# -################################################################################# -SERVER-HEADER-FILTER: html-to-xml Changes the Content-Type header from html to xml. - -s@^(Content-Type:)\s*text/html(;.*)?$@$1 application/xhtml+xml$2@i - -################################################################################# -# -# xml-to-html: Changes the Content-Type header from xml to html. -# -################################################################################# -SERVER-HEADER-FILTER: xml-to-html Changes the Content-Type header from xml to html. - -s@^(Content-Type:)\s*(?:application|text)/(?:xhtml\+)?xml(;.*)?$@$1 text/html$2@i - -################################################################################# -# -# hide-tor-exit-notation: Remove the Tor exit node notation in Host and Referer headers. -# -# Note: If Privoxy and Tor are chained and Privoxy is configured to -# use socks4a, one can use http://www.example.org.foobar.exit/ -# to access the host www.example.org through Tor exit node foobar. -# -# As the HTTP client isn't aware of this notation, it treats the -# whole string "www.example.org.foobar.exit" as host and uses it -# for the "Host" and "Referer" headers. From the server's point of -# view the resulting headers are invalid and can cause problems. -# -# An invalid "Referer" header can trigger "hot-linking" protections, -# an invalid "Host" header will make it impossible for the server to -# find the right vhost (several domains hosted on the same IP address). -# -# This filter removes the "foo.exit" part in those headers -# to prevent the mentioned problems. Note that it only modifies -# the HTTP headers, it doesn't make it impossible for the server -# to detect your Tor exit node based on the IP address the request is -# coming from. -# -################################################################################# -CLIENT-HEADER-FILTER: hide-tor-exit-notation Removes the Tor exit node notation in Host and Referer headers. - -s@^((?:Referer|Host):\s*(?:https?://)?[^/]*)\.[^\./]*?\.exit@$1@i - -################################################################################# -# -# less-download-windows: Prevents annoying download windows for content types -# the browser can handle itself. -# -################################################################################# -SERVER-HEADER-FILTER: less-download-windows Prevent annoying download windows for content types the browser can handle itself. - -s@^Content-Disposition:.*filename=(["']?).*\.(png|gif|jpe?g|diff?|d?patch|c|h|pl|shar)\1.*$@@i -s@^(Content-Type:)\s*(?:message/(?:news|rfc822)|text/x-.*|application/x-sh(?:\s|$))\s*@$1 text/plain@i - -################################################################################# -# -# image-requests: Tags detected image requests as "IMAGE-REQUEST". Whether -# or not the detection actually works depends on the browser. -# -################################################################################# -CLIENT-HEADER-TAGGER: image-requests Tags detected image requests as "IMAGE-REQUEST". - -s@^Accept:\s*image/.*@IMAGE-REQUEST@i - -################################################################################# -# -# css-requests: Tags detected CSS requests as "CSS-REQUEST". Whether -# or not the detection actually works depends on the browser. -# -################################################################################# -CLIENT-HEADER-TAGGER: css-requests Tags detected CSS requests as "CSS-REQUEST". - -s@^Accept:\s*text/css.*@CSS-REQUEST@i - -################################################################################# -# -# client-ip-address: Tags the request with the client's IP address. -# -################################################################################# -CLIENT-HEADER-TAGGER: client-ip-address Tags the request with the client's IP address. - -s@^\w*\s+.*\s+HTTP/\d\.\d\s*@IP-ADDRESS: $origin@D - -################################################################################# -# -# http-method: Tags the request with its HTTP method. -# -################################################################################# -CLIENT-HEADER-TAGGER: http-method Tags the request with its HTTP method. - -s@^(\w*).*HTTP/\d\.\d\s*$@$1@i - -################################################################################# -# -# allow-post: Tags POST requests as "ALLOWED-POST". -# -################################################################################# -CLIENT-HEADER-TAGGER: allow-post Tags POST requests as "ALLOWED-POST". - -s@^(?:POST)\s+.*\s+HTTP/\d\.\d\s*@ALLOWED-POST@i - -################################################################################# -# -# complete-url: Tags the request with the whole request URL. -# -################################################################################# -CLIENT-HEADER-TAGGER: complete-url Tags the request with the whole request URL. - -s@^\w*\s+(.*)\s+HTTP/\d\.\d\s*$@$1@i - -################################################################################# -# -# user-agent: Tags the request with the complete User-Agent header. -# -################################################################################# -CLIENT-HEADER-TAGGER: user-agent Tags the request with the complete User-Agent header. - -s@^User-Agent:.*@$0@i - -################################################################################# -# -# content-type: Tags the request with the content type declared by the server. -# -################################################################################# -SERVER-HEADER-TAGGER: content-type Tags the request with the content type declared by the server. - -s@^Content-Type:\s*([^;]+).*@$1@i - -################################################################################# -# -# privoxy-control: The taggers create tags with the content of X-Privoxy-Control -# headers, the filters remove said headers. -# -################################################################################# -CLIENT-HEADER-TAGGER: privoxy-control Creates tags with the content of X-Privoxy-Control headers. - -s@^X-Privoxy-Control:\s*@@i - -CLIENT-HEADER-FILTER: privoxy-control Removes X-Privoxy-Control headers. - -s@^X-Privoxy-Control:.*@@i - -SERVER-HEADER-TAGGER: privoxy-control Creates tags with the content of X-Privoxy-Control headers. - -s@^X-Privoxy-Control:\s*@@i - -SERVER-HEADER-FILTER: privoxy-control Removes X-Privoxy-Control headers. - -s@^X-Privoxy-Control:.*@@i - - -############################################################################## -# -# Revisions : -# $Log: default.filter,v $ -# Revision 1.71 2009/03/01 18:33:17 ler762 -# couple of changes to the yahoo filter -# -get a bigger email message reply textarea -# -block a few more ads -# -remove the now useless northbanner css change -# -# Revision 1.70 2009/02/21 13:01:51 fabiankeil -# Make blogspot's feed magic slightly more reliable. -# -# Revision 1.69 2009/02/12 15:40:11 ler762 -# more yahoo email ad blocking -# -# Revision 1.68 2008/09/19 13:26:04 fabiankeil -# s@tounge@tongue@. Anonymously reported in #1648657. -# -# Revision 1.67 2008/08/06 17:38:06 fabiankeil -# In banners-by-size, make sure white-space around the height -# attribute is removed as well and replace two spaces with -# "\s" so we don't get fooled by tabs. Fixes #2036125. -# -# Revision 1.66 2008/08/03 17:27:47 fabiankeil -# Teach msn filter to catch a few new ad classes. -# -# Revision 1.65 2008/07/21 13:43:44 fabiankeil -# Fix img-reorder regression introduced with my last commit. -# Some tags were terminated too soon, letting the browser render -# some of their arguments as text. Oops. -# -# Revision 1.64 2008/07/12 15:49:09 fabiankeil -# - Don't let img-reorder touch width attributes -# that aren't followed by either whitespace or '>', -# as those usually indicate onclick nonsense. -# Problem and solution reported by Glenn Washburn in #2014552. -# - While at it, don't use more groups than necessary. -# -# Revision 1.63 2008/06/27 12:53:41 fabiankeil -# Make sure the taggers css-requests and image-requests -# only match at the beginning of the header. -# -# Revision 1.62 2008/06/21 17:02:03 fabiankeil -# Fix typo. -# -# Revision 1.61 2008/05/21 18:44:43 fabiankeil -# - Let the content-type tagger ignore headers without value. -# - Remove a few unused lines at the end of the file. -# -# Revision 1.60 2008/04/26 10:36:41 fabiankeil -# Let the msn filter hide another class. -# -# Revision 1.59 2008/04/23 16:18:18 fabiankeil -# s@declarded@declared@ -# -# Revision 1.58 2008/02/02 15:27:19 fabiankeil -# Yet another yahoo update to get the width limitation removal working again. -# -# Revision 1.57 2008/01/26 15:45:39 fabiankeil -# Don't let the less-download-windows filter mess up -# "Content-Type: application/x-shockwave-flash" headers. -# -# Revision 1.56 2008/01/25 19:12:40 fabiankeil -# - Add yet another new yahoo ad id. -# - Don't let the first banners-by-link job punish URLs for merely -# containing the pattern "/jump/" when it should really look for -# "doubleclick\.net/jump/". -# -# Revision 1.55 2007/12/31 19:53:59 fabiankeil -# Let the msn filter remove the width limitation again. -# -# Revision 1.54 2007/12/31 19:11:31 fabiankeil -# - Let the yahoo filter remove the width limitation again. -# - Teach the blogspot filter to remove useless feed comment -# titles that only contain the beginning of the actual comment. -# -# Revision 1.53 2007/12/23 15:48:12 fabiankeil -# - Lo and behold, the CSS fix for the MSN buttons is no longer necessary. -# - Add some new selectors the msn filter should hide. -# - Add the two yahoo selectors Lee reported in #1856574. -# - Add comments that the width limitation fixes stopped -# working for the msn and yahoo filter. -# -# Revision 1.52 2007/11/27 18:35:48 fabiankeil -# Update CSS for the yahoo filter. -# -# Revision 1.51 2007/11/04 16:15:11 fabiankeil -# - Add client-header taggers: client-ip-address, -# http-method, allow-post, complete-url and user-agent. -# - Add server-header tagger: content-type. -# -# Revision 1.50 2007/11/03 15:05:30 fabiankeil -# Consistently use an empty line between the description and the PCRS code -# and end descriptions with dots. Patch submitted by Simon Ruderich. -# -# Revision 1.49 2007/11/03 14:29:41 fabiankeil -# Spelling fixes mostly submitted by Simon Ruderich. -# -# Revision 1.48 2007/10/17 18:11:32 fabiankeil -# Add privoxy-control header filters and taggers. -# -# Revision 1.47 2007/10/06 15:45:25 fabiankeil -# Let msn hide sponsored links in #at divs. -# -# Revision 1.46 2007/10/06 09:54:13 fabiankeil -# - Let msn hide sponsored links in #ar divs. -# - Teach banners-by-link not to block the graphs for sf's tracker statistics. -# -# Revision 1.45 2007/08/11 16:54:12 fabiankeil -# - Complete the changes from r1.42. -# - Make crude-parental less sensitive to the amount of white-space, -# add the note that it doesn't work too well again and replace the -# DMOZ link with a less confusing explanation. -# -# Revision 1.44 2007/07/18 11:06:56 hal9 -# Replace notarget with '' in all popups filter to keep from breaking xhmtl per -# report from Siegfried Gipp. -# -# Revision 1.43 2007/06/01 14:17:04 fabiankeil -# Mention possible delimiter conflicts with variables in dynamic pcrs commands. -# -# Revision 1.42 2007/05/17 15:55:36 fabiankeil -# Undo an improperly tested last-minute change -# and turn "text-requests" back into "css-requests". -# -# Revision 1.41 2007/05/17 15:45:41 fabiankeil -# - Mention new filter types and the 'D' option. -# - Header filters are now case-insensitive and accept a -# varying amount of whitespace after the colon. -# - Add another selector for yahoo ads. -# - New server-header filter: less-download-windows -# - New client-header taggers: text-requests and image-requests. -# -# Revision 1.40 2007/03/20 15:40:00 fabiankeil -# Adjust to new world order with dedicated header-filter actions. -# -# Revision 1.39 2007/02/21 14:10:23 fabiankeil -# - Fix a js-annoyances pcrs command that broke -# evaluated code. (BR #1124071, thanks to Bor Gergely) -# - Have unsolicited-popups and all-popups catch the -# wheather.com popup reported in in AF #1640173. -# -# Revision 1.38 2007/02/19 11:22:48 hal9 -# Adding back the orginal filter content to offset problems found by Fabian. -# -# Revision 1.37 2007/02/17 13:29:44 hal9 -# Updates to the crude parental filter per Feature Requests item #1648657. -# -# Revision 1.36 2007/02/05 16:47:31 fabiankeil -# - Let banners-by-link look for "advert". -# - Fix XML systax problems with banners-by-link -# and banners-by-size (AF#1651570). -# -# Revision 1.35 2006/12/21 12:28:12 fabiankeil -# Escaping special characters in filter descriptions is no -# longer necessary, it's done by Privoxy now. -# -# Revision 1.34 2006/12/12 17:32:23 fabiankeil -# Added id mbEnd to google filter, it's now and then -# used for the sponsored links. -# -# Have js-annoyances try to prevent status bar -# modifications where the status bar text is -# inside another variable. Fixes 1605710. -# -# Revision 1.33 2006/11/16 17:10:43 fabiankeil -# Removed webbugs debugging comment again. -# The apostrophe could break JavaScript and -# the comment itself could mess up existing -# comments. -# -# Revision 1.32 2006/11/10 18:04:04 fabiankeil -# Have no-ping print the ping warning in red. -# -# Modified yahoo to keep in sync with recent -# CSS changes and to suppress a useless horizontal -# scrollbar. -# -# msn now makes sure that the continue-link boxes -# act as links (the original CSS just changes the cursor). -# -# Changed fun filter regex to leave microsoft links alone. -# Fixes BR 1019996. -# -# Revision 1.31 2006/10/21 13:12:28 fabiankeil -# Added no-ping and hide-tor-exit-notation. -# -# Adjusted jumping-windows to break less. -# Fixes BR 1146134. -# -# Revision 1.30 2006/10/18 12:36:50 fabiankeil -# google filter now cleans Google groups as well. -# -# Revision 1.29 2006/10/11 14:03:17 fabiankeil -# Changed img-reorder regex to only move width -# attributes if they are following at least one -# whitespace. Fixes BR 1328455. -# -# Revision 1.28 2006/10/11 13:31:13 fabiankeil -# Added Anduin Withers' js-annoyances fix -# for not messing up escaped quotes. Fixes BR 999765. -# -# Improved blogspot filter to make it less likely that -# the blogspot banner at the top of the page is missed. -# -# Revision 1.27 2006/10/08 17:00:51 fabiankeil -# Modified webbugs filter to create a comment around the offending -# image instead of removing it entirely. -# -# Adjusted regex to only match if there's at least one whitespace -# before the width and height attributes. Makes it more likely that -# they are indeed attributes, and not part of the value of another attribute. -# Solves BR 1035587. -# -# Thanks to Martin Thomas for diagnosing the cause of the problem. -# -# Revision 1.26 2006/10/06 18:06:16 fabiankeil -# Added header filter x-httpd-php-to-html -# and reverted another img-reorder whitespace -# problem. -# -# Revision 1.25 2006/10/06 15:26:09 fabiankeil -# Bumped copyright year. -# -# Reverted parts of the last img-reorder change -# which were intended to remove superfluous whitespace -# but had the side effect to mess up some tags. -# -# Modified banners-by-size and banners-by-link to -# use border value "0" instead of "\0". Fixes BR 1100065. -# -# Revision 1.24 2006/10/06 11:25:31 fabiankeil -# Taught img-reorder not to break img tags -# with empty src attributes. Fixes BR 1089474. -# Thanks to Raphael Moll for reporting. -# -# Revision 1.23 2006/10/05 14:46:28 fabiankeil -# Replaced "<" in img-reorder's description with "<". -# -# Modified msn filter to tag ads with classes instead -# of ids. There may be more than one ad per page, -# but ids are required to be unique. -# -# Revision 1.22 2006/10/04 19:17:14 fabiankeil -# Incorportated Frédéric Crozat's ie-exploits -# modification to make it less trigger-happy. -# -# Modified blogspot filter to make .post-body -# scrollable if necessary. -# -# Revision 1.21 2006/10/02 16:21:14 fabiankeil -# Adjusted yahoo filter to hide .yschspns as well. -# Added header filters: html-to-xml and xml-to-html. -# -# Revision 1.20 2006/10/01 21:00:22 fabiankeil -# New site-specific filters: google, yahoo, msn and blogspot. -# -# Revision 1.19 2006/07/18 14:48:45 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.11.2.23 2004/02/17 13:34:01 oes -# - Beefed up the protection of the unsolicited-popups -# filter against matching in JavaScript string constants. -# - Extended the fun filter with a German joke -# - Extended the site-specifics filter with a convenience -# reeplacement for managing mailing lists at SourceForge -# -# Revision 1.11.2.22 2004/01/30 15:29:29 oes -# Updated the copyright note -# -# Revision 1.11.2.21 2004/01/20 15:15:01 oes -# Detail enhancement in all-popups -# -# Revision 1.11.2.20 2004/01/06 16:46:14 oes -# Fixed a JS syntax problem in jumping-windows -# -# Revision 1.11.2.19 2003/12/17 17:09:25 oes -# Added remedy against IE address bar spoofing -# -# Revision 1.11.2.18 2003/12/02 11:25:27 oes -# Fixed a line trashed in previous commit -# -# Revision 1.11.2.17 2003/12/01 21:58:46 oes -# Assorted tuning: -# -# - unsolicited-popups no longer matches at start or end of quoted -# strings, and is now activated earlier and deactivated later in -# the page. -# - replacement images in banners-by-* now without border -# - more effective shockwave flash flattening -# - Custom annoyance filtering for Yahoo Groups, Monster.com, NY Times. -# -# Revision 1.11.2.16 2003/05/08 09:44:56 oes -# Allow extra parameters in blink,marquee tags. Fixes bug #734012 -# -# Revision 1.11.2.15 2003/03/30 13:57:08 oes -# Making unsolicited-popups safe for use on <html> tags enclosed in JS strings -# -# Revision 1.11.2.14 2003/03/19 13:17:50 oes -# - Added filter "site-specifics" to address site specific problems -# - Fixed a small problem in the img-reorder filter -# -# Revision 1.11.2.13 2003/03/18 19:28:59 oes -# Fixed a minor problem in the img-reorder filter -# -# Revision 1.11.2.12 2003/03/15 14:06:58 oes -# - Assorted refinements, optimizations and fixes in the js-annoyances, -# img-reorder, banners-by-size, banners-by-link, webbugs, refresh-tags, -# html-annoyances, content-cookies and fun filters -# - Replaced filter "popups" by choice between two modes: -# - "unsolicited-popups" tries to catch only the unsolicited ones -# - "all-popups" tries to kill them all (as before) -# - New filter "tiny-textforms" Help those tiny or hard-wrap textareas. -# - New filter "jumping-windows" that prevents windows from resizing -# and moving themselves -# - Replaced "nimda" with more general "ie-exploits" filter in which -# all filters for exploits shall be collected -# -# Revision 1.11.2.11 2002/11/12 16:14:43 oes -# Exchanged js-annoyance filter against status bar rewrites with improved version by Don Libes -# -# Revision 1.11.2.10 2002/11/11 13:39:47 oes -# Make refresh-tags filter work even on incorrect refresh tags like found on usatoday.com -# -# Revision 1.11.2.9 2002/11/08 16:39:17 oes -# Made img-reorder more cautious. Fixes bug #632715 -# -# Revision 1.11.2.8 2002/10/13 21:56:52 hal9 -# Adding demoronizer filter. This should include all the common abuses. I have -# left a few of the rare cases commented out (never found these in the wild). -# -# Revision 1.11.2.7 2002/09/25 15:09:39 oes -# Preserve original quoting style in <img> tags wherever possible. Fixes Bug #605956 -# -# Revision 1.11.2.6 2002/08/23 14:12:26 oes -# Proofed frameset-borders against "fremaborder=0 border=0" -# -# Revision 1.11.2.5 2002/08/22 15:05:20 oes -# Added Filter to make Quicktime movies saveable (thanks to aaron(a)linville.org for the idea) -# -# Revision 1.11.2.4 2002/08/10 11:32:29 oes -# Attribute values in replacement tags of banners-by-size filter now undelimited. (Fixes bug #592493) -# -# Revision 1.11.2.3 2002/08/05 11:43:56 oes -# Fixed a bug in the popups filter that was introduced with the last fix :-( -# -# Revision 1.11.2.2 2002/08/01 11:20:13 oes -# Fixed bugs 587802, 577802 and an unreported one -# -# Revision 1.11.2.1 2002/07/26 15:18:26 oes -# - All filters reviewed and many shorcomings fixed -# - New filters: img-reorder, banners-by-link and js-events -# - Jobs reorderd because they are now executed in order of -# appearance -# -# Revision 1.11 2002/05/24 00:57:18 oes -# Made WeBugs job ungreedy; Fixes bug 559190 -# -# Revision 1.10 2002/04/18 10:14:19 oes -# renamed some filters -# -# Revision 1.9 2002/04/11 07:36:35 oes -# Generalized js-popup filter -# -# Revision 1.8 2002/04/10 17:07:21 oes -# Fixed potentially desctructive jobs, added noflash filter -# -# Revision 1.7 2002/04/09 18:34:51 oes -# Fixed HTML syntax in replacements -# -# Revision 1.6 2002/04/03 19:49:52 swa -# name change -# -# Revision 1.5 2002/03/27 15:30:26 swa -# have a consistent appearance -# -# Revision 1.4 2002/03/26 22:29:54 swa -# we have a new homepage! -# -# Revision 1.3 2002/03/24 16:08:03 jongfoster -# Fixing banners-by-size for new config URLs -# -# Revision 1.2 2002/03/24 13:02:18 swa -# name change related issues. -# -# Revision 1.1 2002/03/24 11:37:39 jongfoster -# Name change -# -# Revision 1.24 2002/03/16 20:39:54 oes -# - Added descriptions to the filters so users will know what they select in the cgi editor -# - Added content-cookies filter -# - Bugfixed many jobs (Thanks to Al for some hints) -# -# Revision 1.22 2002/03/12 13:42:50 oes -# Fixing & Optimizing REs -# -# Revision 1.21 2002/03/12 11:59:20 oes -# Beefed up Buzzword Bingo -# -# Revision 1.20 2002/03/12 01:42:50 oes -# Introduced modular filters -# -# Revision 1.19 2002/03/10 19:49:24 oes -# Added expression to kill referer tracking in JavaScripts -# -# Revision 1.18 2002/03/08 17:14:12 oes -# PNG -> image in comments -# -# Revision 1.17 2002/03/07 03:50:54 oes -# Adapted comments to new built-in images -# -# Revision 1.16 2002/02/21 00:12:19 jongfoster -# Modifying the banner regexps to use long URLS and to autodetect -# whether to show a logo or a transparent GIF, based on actionsfile -# setting. -# -# Revision 1.15 2001/12/28 23:54:20 steudten -# Fix for feature Req #495374: http-equiv problem -# -# Revision 1.14 2001/12/09 18:55:11 david__schmidt -# Updated CODE_STATUS to beta, commented out microsuck line in re_filterfile -# for 2.9.10 beta -# -# Revision 1.13 2001/10/13 13:11:20 joergs -# Fixed WebBug filter. -# -# Revision 1.12 2001/10/07 15:46:42 oes -# Followed Guy's proposal to change the document.cookie job -# -# Revision 1.11 2001/09/21 12:34:00 joergs -# Added filter to replace "Nimda" code by a warning. -# -# Revision 1.10 2001/07/20 11:04:26 oes -# Added Rodneys javascript cookie filter -# -# Revision 1.9 2001/07/13 14:03:48 oes -# Elimiated yet another bug in the banner-by-size jobs. Shame on me! -# -# Revision 1.8 2001/06/29 13:34:00 oes -# - Added explanation for U and T options -# - Added hint on image replacement by CGI call -# - Fixed bug in banner-by-size jobs -# -# Revision 1.7 2001/06/19 14:21:56 oes -# Fixed microsuck line -# -# Revision 1.6 2001/06/09 14:01:57 swa -# header. cosmetics. default: no messing ala microsuck. -# diff --git a/external/privoxy/doc/gpl.html b/external/privoxy/doc/gpl.html deleted file mode 100644 index 17c517d..0000000 --- a/external/privoxy/doc/gpl.html +++ /dev/null @@ -1,560 +0,0 @@ -<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> - - -<html> - <head> - <title>The GNU General Public License</title> - <meta name="description" content= - "GNU General Public License, as used by Junkbuster"> - <meta name="keywords" content=""> -<style type="text/css"> - -</style> - </head> - - <body bgcolor="#f8f8f0" link="#000078" alink="#ff0022" vlink= - "#787878"> - <p class="sans"><a href="http://www.privoxy.org/"> - Website</a> <b class="dot">·</b> <a href="ijbman.html"> - Manual</a> <b class="dot">·</b> <a href="ijbfaq.html"> - FAQ</a> <b class="dot">·</b> <b>GPL</b></p> - - <h1 align="center"><a name="top_of_page">Internet J<small>UNK<i - style="color: #FF0000">BUSTER</i></small> License</a></h1> - - <h1>This document is out of date</h1> - - <p><b>Development of Junkbuster is ongoing and this document is - no longer current. However, it may provide some assistance. If - you have problems, please use the <a href= - "http://groups.yahoo.com/group/junkbuster-users/">Yahoo Groups - mailing list</a> (which includes an archive of mail), the - SourceForge.net <a href= - "http://sourceforge.net/projects/ijbswa/">project page</a>, or - see the project's <a href="http://www.privoxy.org/">home - page</a>. Please also bear in mind that versions 2.9.x of - Junkbuster are development releases, and are not production - quality.</b></p> - - <h3 align="center">The GNU General Public License</h3> - - <p class="sans"><a name="notus"><b>We did not write the GPL: - the <a href="http://www.fsf.org/fsf/fsf.html">Free Software - Foundation</a> did</b></a></p> - - <h3><img border="0" width="14" height="14" src="fb.gif" alt= - "*">  The GPL allows copying and changing of copyrighted - documents</h3> - - <p><a name="fsf">The Free Software Foundation</a> <a href= - "http://www.fsf.org/fsf/fsf.html">(FSF)</a> is a non-profit - institution that designed the GNU General Public License (GPL) - to promote the publication of free software. The GPL is used by - thousands of programmers who want to give others the right to - copy and modify the source code of their programs. Millions of - people benefit from this.</p> - - <p><a name="junkbuster">We use the GPL</a> to allow everyone to - use, copy and modify the Internet Junkbuster as they wish. <a - name="separate">Companies can use it for commercial - purposes,</a> but they are not permitted to use it in products - that they claim as their property.</p> - - <p><a name="text">The GPL</a> can also be used on documents - written in human languages. This documentation for the Internet - Junkbuster is also under the GPL. This means that you do not - have to break copyright laws in order to print a page or email - a screen of the text to someone, for example.</p> - - <p><a name="rest">The</a> remainder of this page is the text of - the GPL. As legal documents go it's relatively clear, but - unfortunately it's fairly long because it has to cover a lot of - details. The HTML formatting is ours, and should not be - misinterpreted as changing the license in any way.</p> - - <p align="center"><a href="#top_of_page"><img border="0" width= - "250" height="15" src="top.gif" alt= - "--- Back to Top of Page ---"></a></p> - - <h2><a name="v2">Version 2, June 1991</a></h2> - - <blockquote> - <a name="crn">Copyright 1989, 1991</a><br> - <a name="address">Free Software Foundation, Inc.</a><br> - 675 Mass Ave.<br> - Cambridge, MA 02139<br> - USA - </blockquote> - <a name="changing">Everyone</a> - - <p>is permitted to copy and distribute verbatim copies of this - license document, but changing it is not allowed.</p> - - <h3><a name="pream"><img border="0" width="14" height="14" src= - "fb.gif" alt="*"></a>  Preamble</h3> - - <p>The licenses for most software are designed to take away - your freedom to share and change it. By contrast, the GNU - General Public License is intended to guarantee your freedom to - share and change free software--to make sure the software is - free for all its users. This General Public License applies to - most of the Free Software Foundation's software and to any - other program whose authors commit to using it. (Some other - Free Software Foundation software is covered by the GNU Library - General Public License instead.) You can apply it to your - programs, too.</p> - - <p><a name="freedom">When we speak of free software,</a> we are - referring to freedom, not price. Our General Public Licenses - are designed to make sure that you have the freedom to - distribute copies of free software (and charge for this service - if you wish), that you receive source code or can get it if you - want it, that you can change the software or use pieces of it - in new free programs; and that you know you can do these - things.</p> - - <p><a name="forbid">To protect your rights,</a> we need to make - restrictions that forbid anyone to deny you these rights or to - ask you to surrender the rights. These restrictions translate - to certain responsibilities for you if you distribute copies of - the software, or if you modify it.</p> - - <p><a name="allrights">For example,</a> if you distribute - copies of such a program, whether gratis or for a fee, you must - give the recipients all the rights that you have. You must make - sure that they, too, receive or can get the source code. And - you must show them these terms so they know their rights.</p> - - <p><a name="steps">We protect your rights with two steps:</a> - (1) copyright the software, and (2) offer you this license - which gives you legal permission to copy, distribute and/or - modify the software.</p> - - <p><a name="protection">Also,</a> for each author's protection - and ours, we want to make certain that everyone understands - that there is no warranty for this free software. If the - software is modified by someone else and passed on, we want its - recipients to know that what they have is not the original, so - that any problems introduced by others will not reflect on the - original authors' reputations.</p> - - <p><a name="threat">Finally,</a> any free program is threatened - constantly by software patents. We wish to avoid the danger - that redistributors of a free program will individually obtain - patent licenses, in effect making the program proprietary. To - prevent this, we have made it clear that any patent must be - licensed for everyone's free use or not licensed at all.</p> - - <p><a name="terms">The precise terms and conditions</a> for - copying, distribution and modification follow.</p> - - <h3><a name="tnc"><img border="0" width="14" height="14" src= - "fb.gif" alt="*"></a>  GNU General Public License: Terms - and Conditions for Copying, Distribution and Modification</h3> - - <p><a name="applies">O.</a> This License applies to any program - or other work which contains a notice placed by the copyright - holder saying it may be distributed under the terms of this - General Public License. The "Program", below, refers to any - such program or work, and a "work based on the Program" means - either the Program or any derivative work under copyright law: - that is to say, a work containing the Program or a portion of - it, either verbatim or with modifications and/or translated - into another language. (Hereinafter, translation is included - without limitation in the term "modification".) Each licensee - is addressed as "you".</p> - - <p><a name="scope">Activities</a> other than copying, - distribution and modification are not covered by this License; - they are outside its scope. The act of running the Program is - not restricted, and the output from the Program is covered only - if its contents constitute a work based on the Program - (independent of having been made by running the Program).</p> - - <p><a name="depends">Whether that is true depends on what the - Program does.</a><br> - </p> - - <ol type="1"> - <li> - <a name="verbatim">You may copy</a> and distribute verbatim - copies of the Program's source code as you receive it, in - any medium, provided that you conspicuously and - appropriately publish on each copy an appropriate copyright - notice and disclaimer of warranty; keep intact all the - notices that refer to this License and to the absence of - any warranty; and give any other recipients of the Program - a copy of this License along with the Program. - - <p><a name="fee">You may charge a fee</a> for the physical - act of transferring a copy, and you may at your option - offer warranty protection in exchange for a fee.</p> - </li> - - <li> - <a name="modify">You may modify</a> your copy or copies of - the Program or any portion of it, thus forming a work based - on the Program, and copy and distribute such modifications - or work under the terms of Section 1 above, provided that - you also meet all of these conditions:<br> - - - <ol type="a"> - <li><a name="notices">You must cause</a> the modified - files to carry prominent notices stating that you changed - the files and the date of any change.</li> - - <li><a name="nocharge">You must</a> cause any work that - you distribute or publish, that in whole or in part - contains or is derived from the Program or any part - thereof, to be licensed as a whole at no charge to all - third parties under the terms of this License.</li> - - <li><a name="interactive">If the modified program</a> - normally reads commands interactively when run, you must - cause it, when started running for such interactive use - in the most ordinary way, to print or display an - announcement including an appropriate copyright notice - and a notice that there is no warranty (or else, saying - that you provide a warranty) and that users may - redistribute the program under these conditions, and - telling the user how to view a copy of this License. - (Exception: if the Program itself is interactive but does - not normally print such an announcement, your work based - on the Program is not required to print an - announcement.)</li> - </ol> - - <p><a name="sections">These requirements</a> apply to the - modified work as a whole. If identifiable sections of that - work are not derived from the Program, and can be - reasonably considered independent and separate works in - themselves, then this License, and its terms, do not apply - to those sections when you distribute them as separate - works. But when you distribute the same sections as part of - a whole which is a work based on the Program, the - distribution of the whole must be on the terms of this - License, whose permissions for other licensees extend to - the entire whole, and thus to each and every part - regardless of who wrote it.</p> - - <p><a name="intent">Thus,</a> it is not the intent of this - section to claim rights or contest your rights to work - written entirely by you; rather, the intent is to exercise - the right to control the distribution of derivative or - collective works based on the Program.</p> - - <p><a name="aggregation">In addition,</a> mere aggregation - of another work not based on the Program with the Program - (or with a work based on the Program) on a volume of a - storage or distribution medium does not bring the other - work under the scope of this License.</p> - </li> - - <li> - <a name="exeutable">You may copy</a> and distribute the - Program (or a work based on it, under Section 2) in object - code or executable form under the terms of Sections 1 and 2 - above provided that you also do one of the following:<br> - - - <ol type="a"> - <li><a name="medium">Accompany it</a> with the complete - corresponding machine-readable source code, which must be - distributed under the terms of Sections 1 and 2 above on - a medium customarily used for software interchange; - or,</li> - - <li><a name="written">Accompany it with a written - offer,</a> valid for at least three years, to give any - third party, for a charge no more than your cost of - physically performing source distribution, a complete - machine-readable copy of the corresponding source code, - to be distributed under the terms of Sections 1 and 2 - above on a medium customarily used for software - interchange; or,</li> - - <li><a name="distrib">Accompany it</a> with the - information you received as to the offer to distribute - corresponding source code. (This alternative is allowed - only for noncommercial distribution and only if you - received the program in object code or executable form - with such an offer, in accord with Subsection b - above.)</li> - </ol> - - <p><a name="preferred">The source code</a> for a work means - the preferred form of the work for making modifications to - it. For an executable work, complete source code means all - the source code for all modules it contains, plus any - associated interface definition files, plus the scripts - used to control compilation and installation of the - executable. However, as a special exception, the source - code distributed need not include anything that is normally - distributed (in either source or binary form) with the - major components (compiler, kernel, and so on) of the - operating system on which the executable runs, unless that - component itself accompanies the executable.</p> - - <p><a name="access">If distribution of executable or object - code is made</a> by offering access to copy from a - designated place, then offering equivalent access to copy - the source code from the same place counts as distribution - of the source code, even though third parties are not - compelled to copy the source along with the object - code.</p> - </li> - - <li><a name="otherwise">You may not copy,</a> modify, - sublicense, or distribute the Program except as expressly - provided under this License. Any attempt otherwise to copy, - modify, sublicense or distribute the Program is void, and - will automatically terminate your rights under this License. - However, parties who have received copies, or rights, from - you under this License will not have their licenses - terminated so long as such parties remain in full - compliance.</li> - - <li><a name="voluntary">You are not required</a> to accept - this License, since you have not signed it. However, nothing - else grants you permission to modify or distribute the - Program or its derivative works. These actions are prohibited - by law if you do not accept this License. Therefore, by - modifying or distributing the Program (or any work based on - the Program), you indicate your acceptance of this License to - do so, and all its terms and conditions for copying, - distributing or modifying the Program or works based on - it.</li> - - <li><a name="redistrib">Each time you redistribute</a> the - Program (or any work based on the Program), the recipient - automatically receives a license from the original licensor - to copy, distribute or modify the Program subject to these - terms and conditions. You may not impose any further - restrictions on the recipients' exercise of the rights - granted herein. You are not responsible for enforcing - compliance by third parties to this License.</li> - - <li> - <a name="patent">If, as a consequence of a court - judgment</a> or allegation of patent infringement or for - any other reason (not limited to patent issues), conditions - are imposed on you (whether by court order, agreement or - otherwise) that contradict the conditions of this License, - they do not excuse you from the conditions of this License. - If you cannot distribute so as to satisfy simultaneously - your obligations under this License and any other pertinent - obligations, then as a consequence you may not distribute - the Program at all. For example, if a patent license would - not permit royalty-free redistribution of the Program by - all those who receive copies directly or indirectly through - you, then the only way you could satisfy both it and this - License would be to refrain entirely from distribution of - the Program. - - <p><a name="invalid">If any portion</a> of this section is - held invalid or unenforceable under any particular - circumstance, the balance of the section is intended to - apply and the section as a whole is intended to apply in - other circumstances.</p> - - <p><a name="induce">It is not the purpose</a> of this - section to induce you to infringe any patents or other - property right claims or to contest validity of any such - claims; this section has the sole purpose of protecting the - integrity of the free software distribution system, which - is implemented by public license practices. Many people - have made generous contributions to the wide range of - software distributed through that system in reliance on - consistent application of that system; it is up to the - author/donor to decide if he or she is willing to - distribute software through any other system and a licensee - cannot impose that choice.</p> - - <p><a name="clarify">This section</a> is intended to make - thoroughly clear what is believed to be a consequence of - the rest of this License.</p> - </li> - - <li><a name="geog">If the distribution</a> and/or use of the - Program is restricted in certain countries either by patents - or by copyrighted interfaces, the original copyright holder - who places the Program under this License may add an explicit - geographical distribution limitation excluding those - countries, so that distribution is permitted only in or among - countries not thus excluded. In such case, this License - incorporates the limitation as if written in the body of this - License.</li> - - <li><a name="revise">The Free Software Foundation</a> may - publish revised and/or new versions of the General Public - License from time to time. Such new versions will be similar - in spirit to the present version, but may differ in detail to - address new problems or concerns. Each version is given a - distinguishing version number. If the Program specifies a - version number of this License which applies to it and "any - later version", you have the option of following the terms - and conditions either of that version or of any later version - published by the Free Software Foundation. If the Program - does not specify a version number of this License, you may - choose any version ever published by the Free Software - Foundation.</li> - - <li> - <a name="permission">If you wish to incorporate parts</a> - of the Program into other free programs whose distribution - conditions are different, write to the author to ask for - permission. For software which is copyrighted by the Free - Software Foundation, write to the Free Software Foundation; - we sometimes make exceptions for this. Our decision will be - guided by the two goals of preserving the free status of - all derivatives of our free software and of promoting the - sharing and reuse of software generally. - - <p><a name="nowarr">NO WARRANTY</a></p> - </li> - - <li><a name="foc">BECAUSE THE PROGRAM IS LICENSED FREE OF - CHARGE,</a> THERE IS NO WARRANTY FOR THE PROGRAM, TO THE - EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE - STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES - PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, - EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, - THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND - PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM - PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY - SERVICING, REPAIR OR CORRECTION.</li> - - <li><a name="liable">IN NO EVENT UNLESS REQUIRED</a> BY - APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT - HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE - THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, - INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL - DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE - PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA - BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD - PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER - PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN - ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.</li> - </ol> - - <p>END OF TERMS AND CONDITIONS<br> - <br> - </p> - - <h3><a name="append"><img border="0" width="14" height="14" - src="fb.gif" alt="*"></a>  Appendix: How to Apply These - Terms to Your New Programs</h3> - - <p>If you develop a new program, and you want it to be of the - greatest possible use to the public, the best way to achieve - this is to make it free software which everyone can - redistribute and change under these terms.</p> - - <p><a name="attach">To do so,</a> attach the following notices - to the program. It is safest to attach them to the start of - each source file to most effectively convey the exclusion of - warranty; and each file should have at least the "copyright" - line and a pointer to where the full notice is found.</p> - - <blockquote> - <one line to give the program's name and a brief idea of - what it does.> Copyright (C) 19yy <name of author> - - <p><a name="free">This program is free software;</a> you can - redistribute it and/or modify it under the terms of the GNU - General Public License as published by the Free Software - Foundation; either version 2 of the License, or (at your - option) any later version.</p> - - <p><a name="merchant">This program</a> is distributed in the - hope that it will be useful, but WITHOUT ANY WARRANTY; - without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public - License for more details.</p> - - <p><a name="ifnot">You should</a> have received a copy of the - GNU General Public License along with this program; if not, - write to the Free Software Foundation, Inc., 675 Mass Ave, - Cambridge, MA 02139, USA.</p> - </blockquote> - - <p><a name="contact">Also add</a> information on how to contact - you by electronic and paper mail.</p> - - <p><a name="short">If the program is interactive,</a> make it - output a short notice like this when it starts in an - interactive mode:</p> - - <blockquote> - Gnomovision version 69, Copyright (C) 19yy name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details - type `show w'. This is free software, and you are welcome to - redistribute it under certain conditions; type `show c' for - details. - </blockquote> - - <p><a name="hypo">The hypothetical</a> commands `show w' and - `show c' should show the appropriate parts of the General - Public License. Of course, the commands you use may be called - something other than `show w' and `show c'; they could even be - mouse-clicks or menu items--whatever suits your program.</p> - - <p><a name="disclaimer">You should also get your employer</a> - (if you work as a programmer) or your school, if any, to sign a - "copyright disclaimer" for the program, if necessary. Here is a - sample; alter the names:</p> - - <blockquote> - Yoyodyne, Inc., hereby disclaims all copyright interest in - the program `Gnomovision' (which makes passes at compilers) - written by James Hacker. <signature of Ty Coon>, 1 - April 1989<br> - Ty Coon, President of Vice - </blockquote> - - <p><a name="library">This General Public License</a> does not - permit incorporating your program into proprietary programs. If - your program is a subroutine library, you may consider it more - useful to permit linking proprietary applications with the - library. If this is what you want to do, use the GNU Library - General Public License instead of this License.</p> - - <p align="center"><a href="#top_of_page"><img border="0" width= - "250" height="15" src="top.gif" alt= - "--- Back to Top of Page ---"></a></p> - - <p class="sans"><a href="http://www.privoxy.org/"> - Website</a> <b class="dot">·</b> <a href="ijbman.html"> - Manual</a> <b class="dot">·</b> <a href="ijbfaq.html"> - FAQ</a> <b class="dot">·</b> <b>GPL</b></p> - - <p class="sans"><small><small><a href="gpl.html#text"> - Copyright</a> © 1996-8 <a href= - "http://www.junkbusters.com/">Junkbusters</a> <a href= - "http://www.junkbusters.com/ht/en/legal.html#marks">®</a> - Corporation. <a href="gpl.html#text">Copyright</a> © 2001 - <a href="http://sourceforge.net/projects/ijbswa/">Jon - Foster</a>. Copying and distribution permitted under the <a - href="gpl.html">GNU</a> General Public License. The text of the - GNU GPL itself is copyrighted by the FSF, and may be copied but - not modified.</small></small></p> - - <p><small><code><a href= - "http://sourceforge.net/projects/ijbswa/"> - http://sourceforge.net/projects/ijbswa/</a></code></small></p> - </body> -</html> - diff --git a/external/privoxy/doc/pcrs.3 b/external/privoxy/doc/pcrs.3 deleted file mode 100644 index 59e0f22..0000000 --- a/external/privoxy/doc/pcrs.3 +++ /dev/null @@ -1,488 +0,0 @@ -.\" Copyright (c) 2001-2003 Andreas S. Oesterhelt <oes(a)oesterhelt.org> -.\" -.\" This is free documentation; you can redistribute it and/or -.\" modify it under the terms of the GNU General Public License as -.\" published by the Free Software Foundation; either version 2 of -.\" the License, or (at your option) any later version. -.\" -.\" The GNU General Public License's references to "object code" -.\" and "executables" are to be interpreted as the output of any -.\" document formatting or typesetting system, including -.\" intermediate and printed output. -.\" -.\" This manual is distributed in the hope that it will be useful, -.\" but WITHOUT ANY WARRANTY; without even the implied warranty of -.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.\" GNU General Public License for more details. -.\" -.\" You should have received a copy of the GNU General Public -.\" License along with this manual; if not, write to the Free -.\" Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, -.\" MA 02111, USA. -.\" -.TH PCRS 3 "2 December 2003" "pcrs-0.0.3" -.SH NAME -pcrs - Perl-compatible regular substitution. -.SH SYNOPSIS -.br -.B "#include <pcrs.h>" -.PP -.br -.BI "pcrs_job *pcrs_compile(const char *" pattern "," -.ti +5n -.BI "const char *" substitute ", const char *" options , -.ti +5n -.BI "int *" errptr ); -.PP -.br -.BI "pcrs_job *pcrs_compile_command(const char *" command , -.ti +5n -.BI "int *" errptr ); -.PP -.br -.BI "int pcrs_execute(pcrs_job *" job ", char *" subject , -.ti +5n -.BI "int " subject_length ", char **" result , -.ti +5n -.BI "int *" result_length ); -.PP -.br -.BI "int pcrs_execute_list (pcrs_job *" joblist ", char *" subject , -.ti +5n -.BI "int " subject_length ", char **" result , -.ti +5n -.BI "int *" result_length ); -.PP -.br -.BI "pcrs_job *pcrs_free_job(pcrs_job *" job ); -.PP -.br -.BI "void pcrs_free_joblist(pcrs_job *" joblist ); -.PP -.br -.BI "char *pcrs_strerror(int " err ); -.PP -.br - -.SH DESCRIPTION - -The -.SM PCRS -library is a supplement to the -.SB PCRE(3) -library that implements -.RB "regular expression based substitution, like provided by " Perl(1) "'s 's'" -operator. It uses the same syntax and semantics as Perl 5, with just a few -differences (see below). - -In a first step, the information on a substitution, i.e. the pattern, the -substitute and the options are compiled from Perl syntax to an internal form -.RB "called " pcrs_job " by using either the " pcrs_compile() " or " -.BR pcrs_compile_command() " functions." - -Once the job is compiled, it can be used on subjects, which are arbitrary -memory areas containing string or binary data, by calling -.BR pcrs_execute() ". Jobs can be chained to joblists and whole" -.RB "joblists can be applied to a subject using " pcrs_execute_list() . - -There are also convenience functions for freeing the jobs and for errno-to-string -.RB "conversion, namely " pcrs_free_job() ", " pcrs_free_joblist() " and " -.BR pcrs_strerror() . - -.SH COMPILING JOBS - -.RB "The function " pcrs_compile() " is called to compile a " pcrs_job -.RI "from a " pattern ", " substitute " and " options " string." -.RB "The resulting " "pcrs_job" " structure is dynamically allocated and it" -.RB "is the caller's responsibility to call " "pcrs_free_job()" " when it's no longer needed." - -.BR "pcrs_compile_command()" " is a convenience wrapper function that parses a Perl" -.IR "command" " of the form" -.BI "s/" "pattern" "/" "substitute" "/[" "options" "]" -.RB "into its components and then calls " "pcrs_compile()" ". As in Perl, you" -.RB "are not bound to the '" "/" "' character: Whatever" -.RB "follows the '" "s" "' will be used as the delimiter. Patterns or substitutes" -that contain the delimiter need to quote it: -\fBs/th\\/is/th\\/at/\fR -.RB "will replace " "th/is" " by " "th/at" " and can be written more simply as" -.BR "s|th/is|th/at|" "." - -.IR "pattern" ", " "substitute" ", " "options" " and " "command" " must be" -.RI "zero-terminated C strings. " "substitute" " and " "options" " may be" -.BR "NULL" ", in which case they are treated like the empty string." - -.SS "Return value and diagnostics" -On success, both functions return a pointer to the compiled job. -.RB "On failure, " "NULL" -.RI "is returned. In that case, the pcrs error code is written to *" "err" "." - -.SS Patterns -.RI "For the syntax of the " "pattern" ", see the " -.BR "PCRE(3)" " manual page." - -.SS Substitutes -.RI "The " "substitute" " uses" -.RB "Perl syntax as documented in the " "perlre(1)" " manual page, with" -some exceptions: - -Most notably and evidently, since -.SM PCRS -is not Perl, variable interpolation or Perl command substitution won't work. -Special variables that do get interpolated, are: -.TP -.B "$1, $2, ..., $n" -Like in Perl, these variables refer to what the nth capturing subpattern -in the pattern matched. -.TP -.B "$& and $0" -.RB "refer to the whole match. Note that " "$0" " is deprecated in recent" -Perl versions and now refers to the program name. -.TP -.B "$+" -refers to what the last capturing subpattern matched. -.TP -.BR "$` and $'" " (backtick and tick)" -.RI "refer to the areas of the " "subject" " before and after the match, respectively." -.RB "Note that, like in Perl, the " "unmodified" " subject is used, even" -if a global substitution previously matched. - -.PP -Perl4-style references to subpattern matches of the form -\fB\\1, \\2, ...\fR -.RB "which only exist in Perl5 for backwards compatibility, are " "not" -supported. - -Also, since the substitute is a double-quoted string in Perl, you -might expect all Perl syntax for special characters to apply. In fact, -only the following are supported: - -.TP -\fB\\n\fR -newline (0x0a) -.TP -\fB\\r\fR -carriage return (0x0d) -.TP -\fB\\t\fR -horizontal tab (0x09) -.TP -\fB\\f\fR -form feed (0x0c) -.TP -\fB\\b\fR -backspace (0x08) -.TP -\fB\\a\fR -alarm, bell (0x07) -.TP -\fB\\e\fR -escape (0x1b) -.TP -\fB\\0\fR -binary zero (0x00) - -.SS "Options" -.RB "The options " "gmisx" " are supported. " "e" " is not, since it would" -.RB "require a Perl interpreter and neither is " o ", because the pattern -is explicitly compiled, anyway. Additionally, -.SM PCRS -.RB "honors the options " "U" " and " "T" "." -Where -.SM PCRE -.RB "options are mentioned below, refer to " PCRE(3) " for the subtle differences" -to Perl behaviour. - -.TP -.B g -.RB "Replace " all " instances of" -.IR pattern " in " subject , -not just the first one. - -.TP -.B i -.RI "Match the " pattern " without respect to case. This translates to" -.SM PCRE_CASELESS. - -.TP -.B m -.RI "Treat the " subject " as consisting of multiple lines, i.e." -.RB ' ^ "' matches immediately after, and '" $ "' immediately before each newline." -Translates to -.SM PCRE_MULTILINE. - -.TP -.B s -.RI "Treat the " subject " as consisting of one single line, i.e." -.RB "let the scope of the '" . "' metacharacter include newlines." -Translates to -.SM PCRE_DOTALL. - -.TP -.B x -.RI "Allow extended regular expression syntax in the " pattern "," -.RB "enabling whitespace and comments in complex patterns." -Translates to -.SM PCRE_EXTENDED. - -.TP -.B U -.RB "Switch the default behaviour of the '" * "' and '" + "' quantifiers" -.RB "to ungreedy. Note that appending a '" ? "' switches back to greedy(!)." -.RB "The explicit in-pattern switches " (?U) " and " (?-U) " remain unaffected." -Translates to -.SM PCRE_UNGREEDY. - -.TP -.B T -.RI "Consider the " substitute " trivial, i.e. do not interpret any references" -or special character escape sequences in the substitute. Handy for large -user-supplied substitutes, which would otherwise have to be examined and properly -quoted. - -.PP -Unsupported options are silently ignored. - -.SH EXECUTING JOBS - -.RI "Calling " pcrs_execute() " produces a modified copy of the " subject ", in which" -.RB "the first (or all, if the '" g "' option was given when compiling the job)" -.RI "occurance(s) of the job's " pattern " in the " subject " is replaced by the job's" -.IR substitute . - -.RI "The first " subject_length " bytes following " subject " are processed, so" -.RI "a " subject_length " that exceeds the actual " subject " is dangerous." -.RI "Note that for zero-terminated C strings, you should set " subject_length " to" -.BI strlen( subject ) \fR, -so that the dollar metacharacter matches at the end of the string, not after -the string-terminating null byte. For convenience, an extra null byte is -appended to the result so it can again be used as a string. - -.RI "The " subject " itself is left untouched, and the " *result " is dynamically" -.RB "allocated, so it is the caller's responsibility to " free() " it when it's" -no longer needed. - -.RI "The result's length (excluding the extra null byte) is written to " *result_length "." - -.RB "If the job matched, the " PCRS_SUCCESS " flag in" -.IB job ->flags -is set. - - -.SS String subjects -If your - -.SS Return value and diagnostics - -.RB "On success, " pcrs_execute() " returns the number of substitutions that" -were made, which is limited to 0 or 1 for non-global searches. -.RI "On failure, a negative error code is returned and " result " is set" -.RB "to " NULL . - -.SH FREEING JOBS -.RB "It is not sufficient to call " free() " on a " pcrs_job ", because it " -contains pointers to other dynamically allocated structures. -.RB "Use " pcrs_free_job() " instead. It is safe to pass " NULL " pointers " -.RB "(or pointers to invalid " pcrs_job "s that contain " NULL " pointers" -.RB "to dependant structures) to " pcrs_free_job() "." - -.SS Return value -.RB "The value of the job's " next " pointer." - - -.SH CHAINING JOBS - -.SM PCRS -.RB "supports to some extent the chaining of multiple " pcrs_job " structures by" -.RB "means of their " next " member." - -Chaining the jobs is up to you, but once you have built a linked list of jobs, -.RI "you can execute a whole " joblist " on a given subject by" -.RB "a single call to " pcrs_execute_list() ", which will sequentially traverse" -.RB "the linked list until it reaches a " NULL " pointer, and call " pcrs_execute() -.RI "for each job it encounters, feeding the " result " and " result_length " of each" -.RI "call into the next as the " subject " and " subject_length ". As in the single" -.RI "job case, the original " subject " remains untouched, but all interim " result "s" -.RB "are of course " free() "d. The return value is the accumulated number of matches" -.RI "for all jobs in the " joblist "." -.RI "Note that while this is handy, it reduces the diagnostic value of " err ", since " -you won't know which job failed. - -.RI "In analogy, you can free all jobs in a given " joblist " by calling" -.BR pcrs_free_joblist() . - -.SH QUOTING -The quote character is (surprise!) '\fB\\\fR'. It quotes the delimiter in a -.IR command ", the" -.RB ' $ "' in a" -.IR substitute ", and, of course, itself. Note that the" -.RB ' $ "' doesn't need to be quoted if it isn't followed by " [0-9+'`&] "." - -.RI "For quoting in the " pattern ", please refer to" -.BR PCRE(3) . - -.SH DIAGNOSTICS - -.RB "When " compiling " a job either via the " pcrs_compile() " or " pcrs_compile_command() -.RB "functions, you know that something went wrong when you are returned a " NULL " pointer." -.RI "In that case, or in the event of non-fatal warnings, the integer pointed to by " err -contains a nonzero error code, which is either a passed-through -.SM PCRE -error code or one generated by -.SM PCRS. -Under normal circumstances, it can take the following values: -.TP -.B PCRE_ERROR_NOMEMORY -While compiling the pattern, -.SM PCRE -ran out of memory. -.TP -.B PCRS_ERR_NOMEM -While compiling the job, -.SM PCRS -ran out of memory. -.TP -.B PCRS_ERR_CMDSYNTAX -.BR pcrs_compile_command() " didn't find four tokens while parsing the" -.IR command . -.TP -.B PCRS_ERR_STUDY -A -.SM PCRE -.RB "error occured while studying the compiled pattern. Since " pcre_study() -only provides textual diagnostic information, the details are lost. -.TP -.B PCRS_WARN_BADREF -.RI "The " substitute " contains a reference to a capturing subpattern that" -.RI "has a higher index than the number of capturing subpatterns in the " pattern -or that exceeds the current hard limit of 33 (See LIMITATIONS below). As in Perl, -this is non-fatal and results in substitutions with the empty string. - -.PP -.RB "When " executing " jobs via " pcrs_execute() " or " pcrs_execute_list() "," -.RI "a negative return code indicates an error. In that case, *" result -.RB "is " NULL ". Possible error codes are:" -.TP -.B PCRE_ERROR_NOMEMORY -While matching the pattern, -.SM PCRE -ran out of memory. This can only happen if there are more than 33 backrefrences -.RI "in the " pattern "(!)" -.BR and " memory is too tight to extend storage for more." -.TP -.B PCRS_ERR_NOMEM -While executing the job, -.SM PCRS -ran out of memory. -.TP -.B PCRS_ERR_BADJOB -.RB "The " pcrs_job "* passed to " pcrs_execute " was NULL, or the" -.RB "job is bogus (it contains " NULL " pointers to the compiled -pattern, extra, or substitute). - -.PP -If you see any other -.SM PCRE -error code passed through, you've either messed with the compiled job -or found a bug in -.SM PCRS. -Please send me an email. - -.RB "Ah, and don't look for " PCRE_ERROR_NOMATCH ", since this" -is not an error in the context of -.SM PCRS. -.RI "Should there be no match, an exact copy of the " subject " is" -.RI "found at *" result " and the return code is 0 (matches)." - -All error codes can be translated into human readable text by means -.RB "of the " pcrs_strerror() " function." - - -.SH EXAMPLE -A trivial command-line test program for -.SM PCRS -might look like: - -.nf -#include <pcrs.h> -#include <stdio.h> - -int main(int Argc, char **Argv) -{ - pcrs_job *job; - char *result; - size_t newsize; - int err; - - if (Argc != 3) - { - fprintf(stderr, "Usage: %s s/pattern/substitute/[options] subject\\n", Argv[0]); - return 1; - } - - if (NULL == (job = pcrs_compile_command(Argv[1], &err))) - { - fprintf(stderr, "%s: compile error: %s (%d).\\n", Argv[0], pcrs_strerror(err), err); - } - - if (0 > (err = pcrs_execute(job, Argv[2], strlen(Argv[2]), &result, &newsize))) - { - fprintf(stderr, "%s: exec error: %s (%d).\\n", Argv[0], pcrs_strerror(err), err); - } - else - { - printf("Result: *%s*\\n", result); - free(result); - } - - pcrs_free_job(job); - return(err < 0); - -} - -.fi - - -.SH LIMITATIONS -The number of matches that a global job can have is only limited by the -available memory. An initial storage for 40 matches is reserved, which -is dynamically resized by the factor 1.6 whenever it is exhausted. - -The number of capturing subpatterns is currently limited to 33, which -is a Bad Thing[tm]. It should be dynamically expanded until it reaches the -.SM PCRE -limit of 99. -.br -This limitation is particularly embarassing since -.SM PCRE -3.5 has raised the capturing subpattern limit to 65K. - -All of the above values can be adjusted in the "Capacity" section -.RB "of " pcrs.h "." - -The Perl-style escape sequences for special characters \\\fInnn\fR, -\\x\fInn\fR, and \\c\fIX\fR are currently unsupported. - -.SH BUGS -This library has only been tested in the context of one application -and should be considered high risk. - -.SH HISTORY -.SM PCRS -was originally written for the Privoxy project -(http://www.privoxy.org/). - -.SH SEE ALSO -.B PCRE(3), perl(1), perlre(1) - -.SH AUTHOR - -.SM PCRS -is Copyright 2000 - 2003 by Andreas Oesterhelt <andreas(a)oesterhelt.org> and is -licensed under the terms of the GNU Lesser General Public License (LGPL), -version 2.1, which should be included in this distribution, with the exception -that the permission to replace that license with the GNU General Public -License (GPL) given in section 3 is restricted to version 2 of the GPL. - -If it is missing from this distribution, the LGPL can be obtained from -http://www.gnu.org/licenses/lgpl.html or by mail: Write to the Free Software -Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. diff --git a/external/privoxy/doc/source/authors.sgml b/external/privoxy/doc/source/authors.sgml deleted file mode 100644 index a810736..0000000 --- a/external/privoxy/doc/source/authors.sgml +++ /dev/null @@ -1,67 +0,0 @@ - -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ -<!entity % dummy "IGNORE"> -<!entity authors SYSTEM "p-authors.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-not-stable "IGNORE"> -<!entity % p-stable "INCLUDE"> -<!entity % p-text "INCLUDE">  -<!entity % p-authors-formal "INCLUDE">  -]> - -<article id="index"> - -<![%dummy;[ - <para> - <comment> - This is here to keep vim syntax file from breaking :/ - If I knew enough to fix it, I would. - PLEASE DO NOT REMOVE! HB: hal(a)foobox.net - </comment> - </para> -]]> - -<literallayout> - Authors of <application>Privoxy</application> v2.9.x and 3.x -=========================================================================== -</literallayout> - - - &authors; - - -<para> - If we've missed you off this list, please let us know! -</para> - -<literallayout> - Privoxy team. <ulink url="http://www.privoxy.org/">http://www.privoxy.org/</ulink> - <email>ijbswa-developers(a)lists.sourceforge.net</email> -</literallayout> - -</article> diff --git a/external/privoxy/doc/source/buildsource.sgml b/external/privoxy/doc/source/buildsource.sgml deleted file mode 100644 index f8f5955..0000000 --- a/external/privoxy/doc/source/buildsource.sgml +++ /dev/null @@ -1,256 +0,0 @@ - -<para> - To build <application>Privoxy</application> from source, - <ulink url="http://www.gnu.org/software/autoconf/autoconf.html">autoconf</ulink>, - <ulink - url="http://www.gnu.org/software/make/make.html">GNU make - (gmake)</ulink>, and, of course, a C compiler like <ulink - url="http://www.gnu.org/software/gcc/gcc.html">gcc</ulink> are required. -</para> - -<para> - When building from a source tarball, - first unpack the source: -</para> - -<para> - <screen> - tar xzvf privoxy-&p-version;<![%p-not-stable;[-beta]]><![%p-stable;[-stable]]>-src.tar.gz - cd privoxy-&p-version;<![%p-not-stable;[-beta]]><![%p-stable;[-stable]]> -</screen> -</para> - -<para> - For retrieving the current CVS sources, you'll need a CVS client installed. - Note that sources from CVS are typically development quality, and may not be - stable, or well tested. To download CVS source, check the Sourceforge - documentation, which might give commands like: -</para> - -<para> - <screen> - cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co current - cd current -</screen> -</para> - -<para> - This will create a directory named <filename>current/</filename>, which will - contain the source tree. -</para> - -<para> - You can also check out any <application>Privoxy</application> - <quote>branch</quote>, just exchange the <application>current</application> - name with the wanted branch name (Example: v_3_0_branch for the 3.0 cvs - tree). -</para> - -<para> - It is also strongly recommended to not run <application>Privoxy</application> - as root. You should configure/install/run <application>Privoxy</application> as - an unprivileged user, preferably by creating a <quote>privoxy</quote> user - and group just for this purpose. See your local documentation for the correct - command line to do add new users and groups (something like - <command>adduser</command>, but the command syntax may vary from platform - to platform). -</para> - -<para> - <filename>/etc/passwd</filename> might then look like: -</para> - -<para> - <screen> privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell</screen> -</para> - -<para> - And then <filename>/etc/group</filename>, like: -</para> - -<para> - <screen> privoxy:*:7777:</screen> -</para> - -<para> - Some binary packages may do this for you. -</para> - -<para> - Then, to build from either unpacked tarball or CVS source: -</para> - -<para> - <screen> - autoheader - autoconf - ./configure # (--help to see options) - make # (the make from GNU, sometimes called gmake) - su # Possibly required - make -n install # (to see where all the files will go) - make -s install # (to really install, -s to silence output)</screen> -</para> - -<para> - Using GNU <command>make</command>, you can have the first four steps - automatically done for you by just typing: -</para> - -<para> - <screen> - make -</screen> -</para> - -<para> - in the freshly downloaded or unpacked source directory. -</para> - -<para> - To build an executable with security enhanced features so that - users cannot easily bypass the proxy (e.g. <quote>Go There Anyway</quote>), or - alter their own configurations, <command>configure</command> like this: -</para> -<para> - <screen> - ./configure --disable-toggle --disable-editor --disable-force</screen> -</para> -<para> -Then build as above. In Privoxy 3.0.7 and later, all of these options -can also be disabled through the configuration file. -</para> -<para> - <emphasis>WARNING:</emphasis> If installing as root, the install will fail - unless a non-root user or group is specified, or a <literal>privoxy</literal> - user and group already exist on the system. If a non-root user is specified, - and no group, then the installation will try to also use a group of the same name - as <quote>user</quote>. If a group is specified (and no user), then the - support files will be installed as writable by that group, and owned by the - user running the installation. -</para> - -<para> - <command>configure</command> accepts <literal>--with-user</literal> and - <literal>--with-group</literal> options for setting user and group ownership - of the configuration files (which need to be writable by the daemon). The - specified <emphasis>user must already exist</emphasis>. When starting - <application>Privoxy</application>, it must be run as this same user to - insure write access to configuration and log files! -</para> - -<para> - Alternately, you can specify <literal>user</literal> and <literal>group</literal> - on the <command>make</command> command line, but be sure both already exist: -</para> - -<para> - <screen> - make -s install USER=privoxy GROUP=privoxy</screen> -</para> - -<para> - The default installation path for <command>make install</command> is - <filename>/usr/local</filename>. This may of course be customized with - the various <command>./configure</command> path options. If you are doing - an install to anywhere besides <filename>/usr/local</filename>, be - sure to set the appropriate paths with the correct configure options - (<command>./configure --help</command>). Non-privileged users must of course - have write access permissions to wherever the target installation is going. -</para> - -<para> - If you do install to <filename>/usr/local</filename>, the install will use - <literal>sysconfdir=$prefix/etc/privoxy</literal> by default. All other - destinations, and the direct usage of <literal>--sysconfdir</literal> flag - behave like normal, i.e. will not add the extra <filename>privoxy</filename> - directory. This is for a safer install, as there may already exist another - program that uses a file with the <quote>config</quote> name, and thus makes - <filename>/usr/local/etc</filename> cleaner. -</para> - -<para> - If installing to <filename>/usr/local</filename>, the documentation will go - by default to <filename>$prefix/share/doc</filename>. But if this directory - doesn't exist, it will then try <filename>$prefix/doc</filename> and install - there before creating a new <filename>$prefix/share/doc</filename> just for - <application>Privoxy</application>. -</para> - -<para> - Again, if the installs goes to <filename>/usr/local</filename>, the - <literal>localstatedir</literal> (ie: <filename>var/</filename>) will default - to <filename>/var</filename> instead of <literal>$prefix/var</literal> so - the logs will go to <filename>/var/log/privoxy/</filename>, and the pid file - will be created in <filename>/var/run/privoxy.pid</filename>. -</para> - -<para> - <command>make install</command> will attempt to set the correct values - in <filename>config</filename> (main configuration file). You should - check this to make sure all values are correct. If appropriate, - an init script will be installed, but it is up to the user to determine - how and where to start <application>Privoxy</application>. The init - script should be checked for correct paths and values, if anything other than - a default install is done. -</para> - -<para> - If install finds previous versions of local configuration files, most of - these will not be overwritten, and the new ones will be installed with a - <quote>new</quote> extension. default.action and default.filter - <emphasis>will be overwritten</emphasis>. You will then need - to manually update the other installed configuration files as needed. The - default template files <emphasis>will</emphasis> be overwritten. If you have - customized, local templates, these should be stored safely in a separate - directory and defined in <filename>config</filename> by the - <quote>templdir</quote> directive. It is of course wise to always back-up any - important configuration files <quote>just in case</quote>. If a previous - version of <application>Privoxy</application> is already running, you will - have to restart it manually. -</para> - -<para> - For more detailed instructions on how to build Redhat RPMs, - Windows self-extracting installers, building on platforms with - special requirements etc, please consult the <ulink - url="http://www.privoxy.org/developer-manual/newrelease.html">developer manual</ulink>. -</para> - - - - <![%p-readme;[ -<para> - The simplest command line to start <application>Privoxy</application> is - <command>$path/privoxy --user=privoxy $path/etc/privoxy/config</command>. - See <command>privoxy --usage</command>, or the man page, for other options, - and configuration. -</para> -]]> diff --git a/external/privoxy/doc/source/config.sgml b/external/privoxy/doc/source/config.sgml deleted file mode 100644 index 472884c..0000000 --- a/external/privoxy/doc/source/config.sgml +++ /dev/null @@ -1,36 +0,0 @@ -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[ -<!entity % dummy "IGNORE"> -<!entity config SYSTEM "p-config.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-not-stable "IGNORE"> -<!entity % user-man "IGNORE"> -<!entity % config-file "IGNORE"> -<!entity my-app "<application>Privoxy</application>"> -]> - - -<article> - - &config; - -</article> diff --git a/external/privoxy/doc/source/contacting.sgml b/external/privoxy/doc/source/contacting.sgml deleted file mode 100644 index 96293f7..0000000 --- a/external/privoxy/doc/source/contacting.sgml +++ /dev/null @@ -1,262 +0,0 @@ - - - - - -<para> - We value your feedback. In fact, we rely on it to improve - <application>Privoxy</application> and its configuration. - However, please note the following hints, so we can - provide you with the best support: -</para> - -<sect2 id="contact-support"><title>Get Support</title> -<para> - For casual users, our - <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=211118">support forum at SourceForge</ulink> - is probably best suited: - <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=211118">http://sourceforge.net/tracker/?group_id=11118&atid=211118</ulink> -</para> - -<para> - All users are of course welcome to discuss their issues on the <ulink - url="http://lists.sourceforge.net/lists/listinfo/ijbswa-users">users - mailing list</ulink>, where the developers also hang around. -</para> - -<para> - Please don't sent private support requests to individual Privoxy - developers, either use the mailing lists or the support trackers. -</para> - -<para> - Note that the Privoxy mailing lists are moderated. Posts from unsubscribed - addresses have to be accepted manually by a moderator. This may cause a - delay of several days and if you use a subject that doesn't clearly - mention Privoxy or one of its features, your message may be accidentally - discarded as spam. -</para> - -<para> - If you aren't subscribed, you should therefore spend a few seconds - to come up with a proper subject. Additionally you should make it clear - that you want to get CC'd. Otherwise some responses will be directed to - the mailing list only, and you won't see them. -</para> - -</sect2> - -<sect2 id="reporting"><title>Reporting Problems</title> -<para> -<quote>Problems</quote> for our purposes, come in two forms: -</para> - <itemizedlist> - - <listitem> - <para> - Configuration issues, such as ads that slip through, or sites that - don't function properly due to one <application>Privoxy</application> - <quote>action</quote> or another being turned <quote>on</quote>. - </para> - </listitem> - - <listitem> - <para> - <quote>Bugs</quote> in the programming code that makes up - <application>Privoxy</application>, such as that might cause a crash. - </para> - </listitem> -</itemizedlist> - - -<sect3 id="contact-ads"><title>Reporting Ads or Other Configuration Problems</title> -<para> - Please send feedback on ads that slipped through, innocent images that were - blocked, sites that don't work properly, and other configuration related problem of - <filename>default.action</filename> file, to - <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=460288"> - http://sourceforge.net/tracker/?group_id=11118&atid=460288</ulink>, - the Actions File Tracker. -</para> - -<para> - New, improved <filename>default.action</filename> files may occasionally be made - available based on your feedback. These will be announced on the <ulink - url="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce">ijbswa-announce</ulink> - list and available from our the <ulink - url="http://sourceforge.net/project/showfiles.php?group_id=11118">files section</ulink> of - our <ulink url="http://sf.net/projects/ijbswa/">project page</ulink>. -</para> -</sect3> - - -<sect3 id="contact-bugs"><title>Reporting Bugs</title> -<para> - Please report all bugs through our bug tracker: - <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=111118">http://sourceforge.net/tracker/?group_id=11118&atid=111118</ulink>. -</para> - -<para> - Before doing so, please make sure that the bug has <emphasis>not already been submitted</emphasis> - and observe the additional hints at the top of the <ulink - url="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=111118">submit - form</ulink>. If already submitted, please feel free to add any info to the - original report that might help to solve the issue. -</para> - -<para> - Please try to verify that it is a <application>Privoxy</application> bug, - and not a browser or site bug or documented behaviour that just happens - to be different than what you expected. If unsure, - try <ulink url="http://config.privoxy.org/toggle?set=disable">toggling - off</ulink> <application>Privoxy</application>, and see if the problem persists. -</para> - -<para> - If you are using your own custom configuration, please try - the stock configs to see if the problem is configuration related. - If you're having problems with a feature that is disabled by default, - please ask around on the mailing list if others can reproduce the problem. -</para> - -<para> - If you aren't using the latest Privoxy version, the bug may have been found - and fixed in the meantime. We would appreciate if you could take the time - to <ulink url="http://www.privoxy.org/user-manual/installation.html">upgrade - to the latest version</ulink> (or even the latest CVS snapshot) and verify - that your bug still exists. -</para> -<para> -Please be sure to provide the following information: -</para> -<para> - <itemizedlist> - - <listitem> - <para> - The exact <application>Privoxy</application> version you are using - (if you got the source from CVS, please also provide the source code revisions - as shown in <ulink url="http://config.privoxy.org/show-version">http://config.privoxy.org/show-version</ulink>). - </para> - </listitem> - - <listitem> - <para> - The operating system and versions you run - <application>Privoxy</application> on, (e.g. <application>Windows - XP SP2</application>), if you are using a Unix flavor, - sending the output of <quote>uname -a</quote> should do, - in case of GNU/Linux, please also name the distribution. - </para> - </listitem> - - <listitem> - <para> - The name, platform, and version of the <application>browser</application> - you were using (e.g. <application>Internet Explorer v5.5</application> for Mac). - </para> - </listitem> - - <listitem> - <para> - The URL where the problem occurred, or some way for us to duplicate the - problem (e.g. <literal>http://somesite.example.com/?somethingelse=123</literal>). - </para> - </listitem> - - <listitem> - <para> - Whether your version of <application>Privoxy</application> is one supplied - by the <application>Privoxy</application> developers via SourceForge, - or if you got your copy somewhere else. - </para> - </listitem> - - <listitem> - <para> - Whether you are using <application>Privoxy</application> in tandem with - another proxy such as <application>Tor</application>. If so, please - temporary disable the other proxy to see if the symptoms change. - </para> - </listitem> - - <listitem> - <para> - Whether you are using a personal firewall product. If so, does - <application>Privoxy</application> work without it? - </para> - </listitem> - - <listitem> - <para> - Any other pertinent information to help identify the problem such as config - or log file excerpts (yes, you should have log file entries for each - action taken). - </para> - </listitem> - -</itemizedlist> -</para> - -<para> - You don't have to tell us your actual name when filing a problem - report, but please use a nickname so we can differentiate between - your messages and the ones entered by other "anonymous" users that - may respond to your request if they have the same problem or already - found a solution. -</para> - -<para> - Please also check the status of your request a few days after submitting - it, as we may request additional information. If you use a SF id, - you should automatically get a mail when someone responds to your request. -</para> - -<para> - The <ulink url="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT">appendix - of the Privoxy User Manual</ulink> also has helpful information - on understanding <literal>actions</literal>, and <literal>action</literal> debugging. -</para> -</sect3> -</sect2> - -<sect2 id="contact-feature"><title>Request New Features</title> -<para> - You are welcome to submit ideas on new features or other proposals - for improvement through our feature request tracker at - <ulink url="http://sourceforge.net/tracker/?atid=361118&group_id=11118">http://sourceforge.net/tracker/?atid=361118&group_id=11118</ulink>. -</para> -</sect2> - -<sect2 id="contact-other"><title>Other</title> -<para> -For any other issues, feel free to use the mailing lists. Technically interested users -and people who wish to contribute to the project are also welcome on the developers list! -You can find an overview of all <application>Privoxy</application>-related mailing lists, -including list archives, at: -<ulink url="http://sourceforge.net/mail/?group_id=11118">http://sourceforge.net/mail/?group_id=11118</ulink>. -</para> -</sect2> diff --git a/external/privoxy/doc/source/copyright.sgml b/external/privoxy/doc/source/copyright.sgml deleted file mode 100644 index 01c978d..0000000 --- a/external/privoxy/doc/source/copyright.sgml +++ /dev/null @@ -1,47 +0,0 @@ - - - - -<para> - Copyright &my-copy; 2001-2009 by Privoxy Developers <email>ijbswa-developers(a)lists.sourceforge.net</email> -</para> - -<para> - Some source code is based on code Copyright &my-copy; 1997 by Anonymous Coders - and Junkbusters, Inc. and licensed under the <citetitle>GNU General Public - License</citetitle>. -</para> - diff --git a/external/privoxy/doc/source/developer-manual.sgml b/external/privoxy/doc/source/developer-manual.sgml deleted file mode 100644 index 0e1dc1f..0000000 --- a/external/privoxy/doc/source/developer-manual.sgml +++ /dev/null @@ -1,3304 +0,0 @@ -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[ -<!entity % dummy "IGNORE"> -<!entity supported SYSTEM "supported.sgml"> -<!entity newfeatures SYSTEM "newfeatures.sgml"> -<!entity p-intro SYSTEM "privoxy.sgml"> -<!entity history SYSTEM "history.sgml"> -<!entity seealso SYSTEM "seealso.sgml"> -<!entity contacting SYSTEM "contacting.sgml"> -<!entity copyright SYSTEM "copyright.sgml"> -<!entity license SYSTEM "license.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-not-stable "IGNORE"> -<!entity % p-stable "INCLUDE"> -<!entity % p-text "IGNORE">  -<!entity % p-doc "INCLUDE">  -<!entity % seealso-extra "INCLUDE">  -<!entity my-copy "©">  -]> - - -<article id="index"> - <artheader> - <title>Privoxy Developer Manual</title> - <pubdate> - <subscript> -  -  - <link linkend="copyright">Copyright</link> &my-copy; 2001-2009 by - <ulink url="http://www.privoxy.org/">Privoxy Developers</ulink> - </subscript> - </pubdate> - - - <pubdate>$Id: developer-manual.sgml,v 2.27 2009/02/19 02:20:22 hal9 Exp $</pubdate> - - - - <abstract> - -<![%dummy;[ - <para> - <comment> - This is here to keep vim syntax file from breaking :/ - If I knew enough to fix it, I would. - PLEASE DO NOT REMOVE! HB: hal(a)foobox.net - </comment> - </para> - ]]> -<para> - The developer manual provides guidance on coding, testing, packaging, documentation - and other issues of importance to those involved with - <application>Privoxy</application> development. It is mandatory (and helpful!) reading - for anyone who wants to join the team. Note that it's currently out of date - and may not be entirely correct. As always, patches are welcome. -</para> - - - - - - - -<para> - Please note that this document is constantly evolving. This copy represents - the state at the release of version &p-version;. - You can find the latest version of the this manual at <ulink - url="http://www.privoxy.org/developer-manual/">http://www.privoxy.org/developer-manual/</ulink>. - Please see <link linkend="contact">the Contact section</link> - on how to contact the developers. -</para> - - - - - </abstract> - </artheader> - - - - <sect1 id="introduction"><title>Introduction</title> - - <para> - <application>Privoxy</application>, as an heir to - <application>Junkbuster</application>, is a Free Software project - and the code is licensed under the GNU General Public License version 2. - As such, <application>Privoxy</application> development is potentially open - to anyone who has the time, knowledge, and desire to contribute - in any capacity. Our goals are simply to continue the mission, - to improve <application>Privoxy</application>, and - to make it available to as wide an audience as possible. - </para> - <para> - One does not have to be a programmer to contribute. Packaging, testing, - documenting and porting, are all important jobs as well. - </para> - -  - <sect2 id="quickstart"><title>Quickstart to Privoxy Development</title> - <para> - The first step is to join the <ulink - url="mailto:ijbswa-developers@lists.sourceforge.net">developer's mailing list</ulink>. - You can submit your ideas, or even better patches. Patches are best - submitted to the Sourceforge tracker set up for this purpose, but - can be sent to the list for review too. - </para> - <para> - You will also need to have a cvs package installed, which will - entail having ssh installed as well (which seems to be a requirement of - SourceForge), in order to access the cvs repository. Having the GNU build - tools is also going to be important (particularly, autoconf and gmake). - </para> - <para> - For the time being (read, this section is under construction), you can - also refer to the extensive comments in the source code. In fact, - reading the code is recommended in any case. - </para> - </sect2> - </sect1> - -  - <sect1 id="cvs"><title>The CVS Repository</title> - <para> - If you become part of the active development team, you will eventually - need write access to our holy grail, the CVS repository. One of the - team members will need to set this up for you. Please read - this chapter completely before accessing via CVS. - </para> - - <sect2 id="cvsaccess"><title>Access to CVS</title> - <para> - The project's CVS repository is hosted on - <ulink url="http://sourceforge.net/">SourceForge.</ulink> - Please refer to the chapters 6 and 7 in - <ulink url="http://sourceforge.net/docman/?group_id=1">SF's site - documentation</ulink> for the technical access details for your - operating system. For historical reasons, the CVS server is - called <literal>ijbswa.cvs.sourceforge.net</literal>, the repository is - called <literal>ijbswa</literal>, and the source tree module is called - <literal>current</literal>. - </para> - </sect2> - - <sect2 id="cvsbranches"> - <title>Branches</title> - <para> - Within the CVS repository, there are modules and branches. As - mentioned, the sources are in the <literal>current</literal> - <quote>module</quote>. Other modules are present for platform specific - issues. There is a webview of the CVS hierarchy at <ulink - url="http://ijbswa.cvs.sourceforge.net/ijbswa/">http://ijbswa.cvs.sourceforge.net/ijbswa/</ulink>, - which might help with visualizing how these pieces fit together. - </para> - <para> - Branches are used to fork a sub-development path from the main trunk. - Within the <literal>current</literal> module where the sources are, there - is always at least one <quote>branch</quote> from the main trunk - devoted to a stable release series. The main trunk is where active - development takes place for the next stable series (e.g. 3.2.x). - So just prior to each stable series (e.g. 3.0.x), a branch is created - just for stable series releases (e.g. 3.0.0 -> 3.0.1 -> 3.0.2, etc). - Once the initial stable release of any stable branch has taken place, - this branch is <emphasis>only used for bugfixes</emphasis>, which have - had prior testing before being committed to CVS. (See <link - linkend="versionnumbers">Version Numbers</link> below for details on - versioning.) - </para> - <para> - At one time there were two distinct branches: stable and unstable. The - more drastic changes were to be in the unstable branch. These branches - have now been merged to minimize time and effort of maintaining two - branches. - </para> -  - </sect2> - - <sect2 id="cvscommit"><title>CVS Commit Guidelines</title> - <para> - The source tree is the heart of every software project. Every effort must - be made to ensure that it is readable, compilable and consistent at all - times. There are differing guidelines for the stable branch and the - main development trunk, and we ask anyone with CVS access to strictly - adhere to the following guidelines: - </para> - - <para> - Basic Guidelines, for all branches: - </para> - <para> - <itemizedlist> - <listitem><para> - Please don't commit even - a small change without testing it thoroughly first. When we're - close to a public release, ask a fellow developer to review your - changes. - </para></listitem> - <listitem><para> - Your commit message should give a concise overview of <emphasis>what you - changed</emphasis> (no big details) and <emphasis>why you changed it</emphasis> - Just check previous messages for good examples. - </para></listitem> - <listitem><para> - Don't use the same message on multiple files, unless it equally applies to - all those files. - </para></listitem> - <listitem><para> - If your changes span multiple files, and the code won't recompile unless - all changes are committed (e.g. when changing the signature of a function), - then commit all files one after another, without long delays in between. - If necessary, prepare the commit messages in advance. - </para></listitem> - <listitem><para> - Before changing things on CVS, make sure that your changes are in line - with the team's general consensus on what should be done. - </para></listitem> - <listitem> - <para> - Note that near a major public release, we get more cautious. - There is always the possibility to submit a patch to the <ulink - url="http://sourceforge.net/tracker/?atid=311118&group_id=11118&func=bro…">patch - tracker</ulink> instead. - </para> - </listitem> - </itemizedlist> - </para> - - - </sect2> - - </sect1> - -  -<sect1 id="documentation"><title>Documentation Guidelines</title> - <para> - All formal documents are maintained in Docbook SGML and located in the - <computeroutput>doc/source/*</computeroutput> directory. You will need - <ulink url="http://www.docbook.org">Docbook</ulink>, the Docbook - DTD's and the Docbook modular stylesheets (or comparable alternatives), - and either <application>jade</application> or - <application>openjade</application> (recommended) installed in order to - build docs from source. Currently there is <ulink - url="../user-manual/index.html"><citetitle>user-manual</citetitle></ulink>, - <ulink url="../faq/index.html"><citetitle>FAQ</citetitle></ulink>, and, of - course this, the <citetitle>developer-manual</citetitle> in this format. - The <citetitle>README</citetitle>, <citetitle>AUTHORS</citetitle>, - <citetitle>INSTALL</citetitle>, - <citetitle>privoxy.1</citetitle> (man page), and - <citetitle>config</citetitle> files are also now maintained as Docbook - SGML. These files, when built, in the top-level source directory are - generated files! Also, the <application>Privoxy</application> <filename>index.html</filename> (and a - variation on this file, <filename>privoxy-index.html</filename>, - meant for inclusion with doc packages), are maintained as SGML as well. - <emphasis>DO NOT edit these directly</emphasis>. Edit the SGML source, or - contact someone involved in the documentation. - </para> - <para> - <filename>config</filename> requires some special handling. The reason it - is maintained this way is so that the extensive comments in the file - mirror those in <citetitle>user-manual</citetitle>. But the conversion - process requires going from SGML to HTML to text to special formatting - required for the embedded comments. Some of this does not survive so - well. Especially some of the examples that are longer than 80 characters. - The build process for this file outputs to <filename>config.new</filename>, - which should be reviewed for errors and mis-formatting. Once satisfied - that it is correct, then it should be hand copied to - <filename>config</filename>. - </para> - <para> - Other, less formal documents (e.g. <filename>LICENSE</filename>) are - maintained as plain text files in the top-level source directory. - </para> - <para> - Packagers are encouraged to include this documentation. For those without - the ability to build the docs locally, text versions of each are kept in - CVS. HTML versions are also being kept in CVS under - <filename>doc/webserver/*</filename>. And PDF version are kept in - <filename>doc/pdf/*</filename>. - </para> - <para> - Formal documents are built with the Makefile targets of - <computeroutput>make dok</computeroutput>, or alternately - <computeroutput>make redhat-dok</computeroutput>. If you have problems, - try both. The build process uses the document SGML sources in - <computeroutput>doc/source/*/*</computeroutput> to update all text files in - <computeroutput>doc/text/</computeroutput> and to update all HTML - documents in <computeroutput>doc/webserver/</computeroutput>. - </para> - <para> - Documentation writers should please make sure documents build - successfully before committing to CVS, if possible. - </para> - <para> - How do you update the webserver (i.e. the pages on privoxy.org)? - - <orderedlist numeration="arabic"> - <listitem><para> - First, build the docs by running <computeroutput>make - dok</computeroutput> (or alternately <computeroutput>make - redhat-dok</computeroutput>). For PDF docs, do <computeroutput>make - dok-pdf</computeroutput>. - </para></listitem> - <listitem><para> - Run <computeroutput>make webserver</computeroutput> which copies all - files from <computeroutput>doc/webserver</computeroutput> to the - sourceforge webserver via scp. - </para></listitem> - </orderedlist> - </para> - - <para> - Finished docs should be occasionally submitted to CVS - (<filename>doc/webserver/*/*.html</filename>) so that those without - the ability to build them locally, have access to them if needed. - This is especially important just prior to a new release! Please - do this <emphasis>after</emphasis> the <literal>$VERSION</literal> and - other release specific data in <filename>configure.in</filename> has been - updated (this is done just prior to a new release). - </para> - - -<sect2 id="sgml"> -<title>Quickstart to Docbook and SGML</title> -<para> - If you are not familiar with SGML, it is a markup language similar to HTML. - Actually, not a mark up language per se, but a language used to define - markup languages. In fact, HTML is an SGML application. Both will use - <quote>tags</quote> to format text and other content. SGML tags can be much - more varied, and flexible, but do much of the same kinds of things. The tags, - or <quote>elements</quote>, are definable in SGML. There is no set - <quote>standards</quote>. Since we are using - <application>Docbook</application>, our tags are those that are defined by - <application>Docbook</application>. Much of how the finish document is - rendered is determined by the <quote>stylesheets</quote>. - The stylesheets determine how each tag gets translated to HTML, or other - formats. -</para> - -<para> - Tags in Docbook SGML need to be always <quote>closed</quote>. If not, you - will likely generate errors. Example: <literal><title>My - Title</title></literal>. They are also case-insensitive, but we - strongly suggest using all lower case. This keeps compatibility with - [Docbook] <application>XML</application>. -</para> - -<para> - Our documents use <quote>sections</quote> for the most part. Sections - will be processed into HTML headers (e.g. <literal>h1</literal> for - <literal>sect1</literal>). The <application>Docbook</application> stylesheets - will use these to also generate the Table of Contents for each doc. Our - TOC's are set to a depth of three. Meaning <literal>sect1</literal>, - <literal>sect2</literal>, and <literal>sect3</literal> will have TOC - entries, but <literal>sect4</literal> will not. Each section requires - a <literal><title></literal> element, and at least one - <literal><para></literal>. There is a limit of five section - levels in Docbook, but generally three should be sufficient for our - purposes. -</para> - -<para> - Some common elements that you likely will use: -</para> - -<para> - <simplelist> - <member> - <emphasis><para></para></emphasis>, paragraph delimiter. Most - text needs to be within paragraph elements (there are some exceptions). - </member> - <member> - <emphasis><emphasis></emphasis></emphasis>, the stylesheets - make this italics. - </member> - <member> - <emphasis><filename></filename></emphasis>, files and directories. - </member> - <member> - <emphasis><command></command></emphasis>, command examples. - </member> - <member> - <emphasis><literallayout></literallayout></emphasis>, like - <literal><pre></literal>, more or less. - </member> - <member> - <emphasis><itemizedlist></itemizedlist></emphasis>, list with bullets. - </member> - <member> - <emphasis><listitem></listitem></emphasis>, member of the above. - </member> - <member> - <emphasis><screen></screen></emphasis>, screen output, implies - <literal><literallayout></literal>. - </member> - <member> - <emphasis><ulink url="example.com"></ulink></emphasis>, like - HTML <literal><a></literal> tag. - </member> - <member> - <emphasis><quote></quote></emphasis>, for, doh, quoting text. - </member> - </simplelist> -</para> - -<para> - Look at any of the existing docs for examples of all these and more. -</para> - -<para> - You might also find <quote><ulink - url="http://opensource.bureau-cornavin.com/crash-course/index.html">Writing Documentation - Using DocBook - A Crash Course</ulink></quote> useful. -</para> -</sect2> - - - <sect2 id="docstyle"> - <title><application>Privoxy</application> Documentation Style</title> - <para> - It will be easier if everyone follows a similar writing style. This - just makes it easier to read what someone else has written if it - is all done in a similar fashion. - </para> - <para> - Here it is: - </para> - <para> - <itemizedlist> - <listitem> - <para> - All tags should be lower case. - </para> - </listitem> - <listitem> - <para> - Tags delimiting a <emphasis>block</emphasis> of text (even small - blocks) should be on their own line. Like: - <literallayout> - <para> - Some text goes here. - </para> - </literallayout> - Tags marking individual words, or few words, should be in-line: - <literallayout> - Just to <emphasis>emphasize</emphasis>, some text goes here. - </literallayout> - </para> - </listitem> - <listitem> - <para> - Tags should be nested and step indented for block text like: (except - in-line tags) - <literallayout> - <para> - <itemizedlist> - <para> - <listitem> - Some text goes here in our list example. - </listitem> - </para> - </itemizedlist> - </para> - </literallayout> - This makes it easier to find the text amongst the tags ;-) - </para> - </listitem> - <listitem> - <para> - Use white space to separate logical divisions within a document, - like between sections. Running everything together consistently - makes it harder to read and work on. - </para> - </listitem> - <listitem> - <para> - Do not hesitate to make comments. Comments can either use the - <comment> element, or the  style comment - familiar from HTML. (Note in Docbook v4.x <comment> is - replaced by <remark>.) - </para> - </listitem> - <listitem> - <para> - We have an international audience. Refrain from slang, or English - idiosyncrasies (too many to list :). Humor also does not translate - well sometimes. - </para> - </listitem> - <listitem> - <para> - Try to keep overall line lengths in source files to 80 characters or less - for obvious reasons. This is not always possible, with lengthy URLs for - instance. - </para> - </listitem> - <listitem> - <para> - Our documents are available in differing formats. Right now, they - are just plain text, HTML, and PDF, but others are always a - future possibility. Be careful with URLs (<ulink>), and avoid - this mistake: - </para> - <para> - My favorite site is <ulink url="http://example.com">here</ulink>. - </para> - <para> - This will render as <quote>My favorite site is here</quote>, which is - not real helpful in a text doc. Better like this: - </para> - <para> - My favorite site is <ulink url="http://example.com">example.com</ulink>. - </para> - </listitem> - <listitem> - <para> - All documents should be spell checked occasionally. - <application>aspell</application> can check SGML with the - <literal>-H</literal> option. (<application>ispell</application> I think - too.) - </para> - </listitem> - - </itemizedlist> - </para> - - </sect2> - - -  - - <sect2><title>Privoxy Custom Entities</title> - <para> - <application>Privoxy</application> documentation is using - a number of customized <quote>entities</quote> to facilitate - documentation maintenance. - </para> - <para> - We are using a set of <quote>boilerplate</quote> files with generic text, - that is used by multiple docs. This way we can write something once, and use - it repeatedly without having to re-write the same content over and over again. - If editing such a file, keep in mind that it should be - <emphasis>generic</emphasis>. That is the purpose; so it can be used in varying - contexts without additional modifications. - </para> - <para> - We are also using what <application>Docbook</application> calls - <quote>internal entities</quote>. These are like variables in - programming. Well, sort of. For instance, we have the - <literal>p-version</literal> entity that contains the current - <application>Privoxy</application> version string. You are strongly - encouraged to use these where possible. Some of these obviously - require re-setting with each release (done by the Makefile). A sampling of - custom entities are listed below. See any of the main docs for examples. - </para> - - <para> - <itemizedlist> - <listitem> - <para> - Re- <quote>boilerplate</quote> text entities are defined like: - </para> - <para> - <literal><!entity supported SYSTEM "supported.sgml"></literal> - </para> - <para> - In this example, the contents of the file, - <filename>supported.sgml</filename> is available for inclusion anywhere - in the doc. To make this happen, just reference the now defined - entity: <literal>&supported;</literal> (starts with an ampersand - and ends with a semi-colon), and the contents will be dumped into - the finished doc at that point. - </para> - </listitem> - <listitem> - <para> - Commonly used <quote>internal entities</quote>: - </para> - <simplelist> - <member> - <emphasis>p-version</emphasis>: the <application>Privoxy</application> - version string, e.g. <quote>&p-version;</quote>. - </member> - <member> - <emphasis>p-status</emphasis>: the project status, either - <quote>alpha</quote>, <quote>beta</quote>, or <quote>stable</quote>. - </member> - <member> - <emphasis>p-not-stable</emphasis>: use to conditionally include - text in <quote>not stable</quote> releases (e.g. <quote>beta</quote>). - </member> - <member> - <emphasis>p-stable</emphasis>: just the opposite. - </member> - <member> - <emphasis>p-text</emphasis>: this doc is only generated as text. - </member> - </simplelist> - </listitem> - </itemizedlist> - </para> - <para> - There are others in various places that are defined for a specific - purpose. Read the source! - </para> - - </sect2> - - </sect1> - - - - -  - <sect1 id="coding"><title>Coding Guidelines</title> - - <sect2 id="s1"><title>Introduction</title> - - <para>This set of standards is designed to make our lives easier. It is - developed with the simple goal of helping us keep the "new and improved - <application>Privoxy</application>" consistent and reliable. Thus making - maintenance easier and increasing chances of success of the - project.</para> - - <para>And that of course comes back to us as individuals. If we can - increase our development and product efficiencies then we can solve more - of the request for changes/improvements and in general feel good about - ourselves. ;-></para> - - </sect2> - - <sect2 id="s2"><title>Using Comments</title> - - - <sect3 id="s3"><title>Comment, Comment, Comment</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Comment as much as possible without commenting the obvious. - For example do not comment "variable_a is equal to variable_b". - Instead explain why variable_a should be equal to the variable_b. - Just because a person can read code does not mean they will - understand why or what is being done. A reader may spend a lot - more time figuring out what is going on when a simple comment - or explanation would have prevented the extra research. Please - help your brother IJB'ers out!</para> - - <para>The comments will also help justify the intent of the code. - If the comment describes something different than what the code - is doing then maybe a programming error is occurring.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -/* if page size greater than 1k ... */ -if ( page_length() > 1024 ) -{ - ... "block" the page up ... -} - -/* if page size is small, send it in blocks */ -if ( page_length() > 1024 ) -{ - ... "block" the page up ... -} - -This demonstrates 2 cases of "what not to do". The first is a -"syntax comment". The second is a comment that does not fit what -is actually being done. -</programlisting> - </sect3> - - - - <sect3 id="s4"><title>Use blocks for comments</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Comments can help or they can clutter. They help when they - are differentiated from the code they describe. One line - comments do not offer effective separation between the comment - and the code. Block identifiers do, by surrounding the code - with a clear, definable pattern.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -/********************************************************************* - * This will stand out clearly in your code! - *********************************************************************/ -if ( this_variable == that_variable ) -{ - do_something_very_important(); -} - - -/* unfortunately, this may not */ -if ( this_variable == that_variable ) -{ - do_something_very_important(); -} - - -if ( this_variable == that_variable ) /* this may not either */ -{ - do_something_very_important(); -}</programlisting> - - <para><emphasis>Exception:</emphasis></para> - - <para>If you are trying to add a small logic comment and do not - wish to "disrupt" the flow of the code, feel free to use a 1 - line comment which is NOT on the same line as the code.</para> - - - </sect3> - - - <sect3 id="s5"><title>Keep Comments on their own line</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>It goes back to the question of readability. If the comment - is on the same line as the code it will be harder to read than - the comment that is on its own line.</para> - - <para>There are three exceptions to this rule, which should be - violated freely and often: during the definition of variables, - at the end of closing braces, when used to comment - parameters.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -/********************************************************************* - * This will stand out clearly in your code, - * But the second example won't. - *********************************************************************/ -if ( this_variable == this_variable ) -{ - do_something_very_important(); -} - -if ( this_variable == this_variable ) /*can you see me?*/ -{ - do_something_very_important(); /*not easily*/ -} - - -/********************************************************************* - * But, the encouraged exceptions: - *********************************************************************/ -int urls_read = 0; /* # of urls read + rejected */ -int urls_rejected = 0; /* # of urls rejected */ - -if ( 1 == X ) -{ - do_something_very_important(); -} - - -short do_something_very_important( - short firstparam, /* represents something */ - short nextparam /* represents something else */ ) -{ - ...code here... - -} /* -END- do_something_very_important */ -</programlisting> - </sect3> - - - <sect3 id="s6"><title>Comment each logical step</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Logical steps should be commented to help others follow the - intent of the written code and comments will make the code more - readable.</para> - - <para>If you have 25 lines of code without a comment, you should - probably go back into it to see where you forgot to put - one.</para> - - <para>Most "for", "while", "do", etc... loops _probably_ need a - comment. After all, these are usually major logic - containers.</para> - - - </sect3> - - - <sect3 id="s7"><title>Comment All Functions Thoroughly</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>A reader of the code should be able to look at the comments - just prior to the beginning of a function and discern the - reason for its existence and the consequences of using it. The - reader should not have to read through the code to determine if - a given function is safe for a desired use. The proper - information thoroughly presented at the introduction of a - function not only saves time for subsequent maintenance or - debugging, it more importantly aids in code reuse by allowing a - user to determine the safety and applicability of any function - for the problem at hand. As a result of such benefits, all - functions should contain the information presented in the - addendum section of this document.</para> - - - </sect3> - - - <sect3 id="s8"><title>Comment at the end of braces if the - content is more than one screen length</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Each closing brace should be followed on the same line by a - comment that describes the origination of the brace if the - original brace is off of the screen, or otherwise far away from - the closing brace. This will simplify the debugging, - maintenance, and readability of the code.</para> - - <para>As a suggestion , use the following flags to make the - comment and its brace more readable:</para> - - <para>use following a closing brace: } /* -END- if() or while () - or etc... */</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -if ( 1 == X ) -{ - do_something_very_important(); - ...some long list of commands... -} /* -END- if x is 1 */ - -or: - -if ( 1 == X ) -{ - do_something_very_important(); - ...some long list of commands... -} /* -END- if ( 1 == X ) */ -</programlisting> - </sect3> - - </sect2> - - <sect2 id="s9"><title>Naming Conventions</title> - - - - <sect3 id="s10"><title>Variable Names</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Use all lowercase, and separate words via an underscore - ('_'). Do not start an identifier with an underscore. (ANSI C - reserves these for use by the compiler and system headers.) Do - not use identifiers which are reserved in ANSI C++. (E.g. - template, class, true, false, ...). This is in case we ever - decide to port Privoxy to C++.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -int ms_iis5_hack = 0;</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para> -<programlisting> -int msiis5hack = 0; int msIis5Hack = 0; -</programlisting> -</para> - - - - </sect3> - - <sect3 id="s11"><title>Function Names</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Use all lowercase, and separate words via an underscore - ('_'). Do not start an identifier with an underscore. (ANSI C - reserves these for use by the compiler and system headers.) Do - not use identifiers which are reserved in ANSI C++. (E.g. - template, class, true, false, ...). This is in case we ever - decide to port Privoxy to C++.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -int load_some_file( struct client_state *csp )</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para> -<programlisting> -int loadsomefile( struct client_state *csp ) -int loadSomeFile( struct client_state *csp ) -</programlisting> -</para> - - - </sect3> - - - <sect3 id="s12"><title>Header file prototypes</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Use a descriptive parameter name in the function prototype - in header files. Use the same parameter name in the header file - that you use in the c file.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -(.h) extern int load_aclfile( struct client_state *csp ); -(.c) int load_aclfile( struct client_state *csp )</programlisting> - - <para><emphasis>Instead of:</emphasis> -<programlisting> -(.h) extern int load_aclfile( struct client_state * ); or -(.h) extern int load_aclfile(); -(.c) int load_aclfile( struct client_state *csp ) -</programlisting> -</para> - - - </sect3> - - - <sect3 id="s13"><title>Enumerations, and #defines</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Use all capital letters, with underscores between words. Do - not start an identifier with an underscore. (ANSI C reserves - these for use by the compiler and system headers.)</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -(enumeration) : enum Boolean { FALSE, TRUE }; -(#define) : #define DEFAULT_SIZE 100;</programlisting> - - <para><emphasis>Note:</emphasis> We have a standard naming scheme for #defines - that toggle a feature in the preprocessor: FEATURE_>, where - > is a short (preferably 1 or 2 word) description.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -#define FEATURE_FORCE 1 - -#ifdef FEATURE_FORCE -#define FORCE_PREFIX blah -#endif /* def FEATURE_FORCE */ -</programlisting> - </sect3> - - - <sect3 id="s14"><title>Constants</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Spell common words out entirely (do not remove vowels).</para> - - <para>Use only widely-known domain acronyms and abbreviations. - Capitalize all letters of an acronym.</para> - - <para>Use underscore (_) to separate adjacent acronyms and - abbreviations. Never terminate a name with an underscore.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -#define USE_IMAGE_LIST 1</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para> -<programlisting> -#define USE_IMG_LST 1 or -#define _USE_IMAGE_LIST 1 or -#define USE_IMAGE_LIST_ 1 or -#define use_image_list 1 or -#define UseImageList 1 -</programlisting> -</para> - - - </sect3> - - </sect2> - - - <sect2 id="s15"><title>Using Space</title> - - - - <sect3 id="s16"><title>Put braces on a line by themselves.</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>The brace needs to be on a line all by itself, not at the - end of the statement. Curly braces should line up with the - construct that they're associated with. This practice makes it - easier to identify the opening and closing braces for a - block.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -if ( this == that ) -{ - ... -}</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para>if ( this == that ) { ... }</para> - - <para>or</para> - - <para>if ( this == that ) { ... }</para> - - <para><emphasis>Note:</emphasis> In the special case that the if-statement is - inside a loop, and it is trivial, i.e. it tests for a - condition that is obvious from the purpose of the block, - one-liners as above may optically preserve the loop structure - and make it easier to read.</para> - - <para><emphasis>Status:</emphasis> developer-discretion.</para> - - <para><emphasis>Example exception:</emphasis></para> -<programlisting> -while ( more lines are read ) -{ - /* Please document what is/is not a comment line here */ - if ( it's a comment ) continue; - - do_something( line ); -} -</programlisting> - </sect3> - - - <sect3 id="s17"><title>ALL control statements should have a - block</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Using braces to make a block will make your code more - readable and less prone to error. All control statements should - have a block defined.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -if ( this == that ) -{ - do_something(); - do_something_else(); -}</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para>if ( this == that ) do_something(); do_something_else();</para> - - <para>or</para> - - <para>if ( this == that ) do_something();</para> - - <para><emphasis>Note:</emphasis> The first example in "Instead of" will execute - in a manner other than that which the developer desired (per - indentation). Using code braces would have prevented this - "feature". The "explanation" and "exception" from the point - above also applies.</para> - - - </sect3> - - - <sect3 id="s18"><title>Do not belabor/blow-up boolean - expressions</title> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -structure->flag = ( condition );</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para>if ( condition ) { structure->flag = 1; } else { - structure->flag = 0; }</para> - - <para><emphasis>Note:</emphasis> The former is readable and concise. The later - is wordy and inefficient. Please assume that any developer new - to the project has at least a "good" knowledge of C/C++. (Hope - I do not offend by that last comment ... 8-)</para> - - - </sect3> - - - <sect3 id="s19"><title>Use white space freely because it is - free</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Make it readable. The notable exception to using white space - freely is listed in the next guideline.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -int first_value = 0; -int some_value = 0; -int another_value = 0; -int this_variable = 0; - -if ( this_variable == this_variable ) - -first_value = old_value + ( ( some_value - another_value ) - whatever ) -</programlisting> - </sect3> - - - <sect3 id="s20"><title>Don't use white space around structure - operators</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>- structure pointer operator ( "->" ) - member operator ( - "." ) - functions and parentheses</para> - - <para>It is a general coding practice to put pointers, references, - and function parentheses next to names. With spaces, the - connection between the object and variable/function name is not - as clear.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -a_struct->a_member; -a_struct.a_member; -function_name();</programlisting> - - <para><emphasis>Instead of:</emphasis> a_struct -> a_member; a_struct . a_member; - function_name ();</para> - - - </sect3> - - - <sect3 id="s21"><title>Make the last brace of a function stand - out</title> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -int function1( ... ) -{ - ...code... - return( ret_code ); - -} /* -END- function1 */ - - -int function2( ... ) -{ -} /* -END- function2 */ -</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para>int function1( ... ) { ...code... return( ret_code ); } int - function2( ... ) { }</para> - - <para><emphasis>Note:</emphasis> Use 1 blank line before the closing brace and 2 - lines afterward. This makes the end of function standout to - the most casual viewer. Although function comments help - separate functions, this is still a good coding practice. In - fact, I follow these rules when using blocks in "for", "while", - "do" loops, and long if {} statements too. After all whitespace - is free!</para> - - <para><emphasis>Status:</emphasis> developer-discretion on the number of blank - lines. Enforced is the end of function comments.</para> - - - </sect3> - - - <sect3 id="s22"><title>Use 3 character indentions</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>If some use 8 character TABs and some use 3 character TABs, - the code can look *very* ragged. So use 3 character indentions - only. If you like to use TABs, pass your code through a filter - such as "expand -t3" before checking in your code.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -static const char * const url_code_map[256] = -{ - NULL, ... -}; - - -int function1( ... ) -{ - if ( 1 ) - { - return( ALWAYS_TRUE ); - } - else - { - return( HOW_DID_YOU_GET_HERE ); - } - - return( NEVER_GETS_HERE ); - -} -</programlisting> - </sect3> - - </sect2> - - - <sect2 id="s23"><title>Initializing</title> - - - - <sect3 id="s24"><title>Initialize all variables</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Do not assume that the variables declared will not be used - until after they have been assigned a value somewhere else in - the code. Remove the chance of accidentally using an unassigned - variable.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -short a_short = 0; -float a_float = 0; -struct *ptr = NULL;</programlisting> - - <para><emphasis>Note:</emphasis> It is much easier to debug a SIGSEGV if the - message says you are trying to access memory address 00000000 - and not 129FA012; or array_ptr[20] causes a SIGSEV vs. - array_ptr[0].</para> - - <para><emphasis>Status:</emphasis> developer-discretion if and only if the - variable is assigned a value "shortly after" declaration.</para> - - </sect3> - </sect2> - - - <sect2 id="s25"><title>Functions</title> - - - - <sect3 id="s26"><title>Name functions that return a boolean as a - question.</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Value should be phrased as a question that would logically - be answered as a true or false statement</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -should_we_block_this(); -contains_an_image(); -is_web_page_blank(); -</programlisting> - </sect3> - - - <sect3 id="s27"><title>Always specify a return type for a - function.</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>The default return for a function is an int. To avoid - ambiguity, create a return for a function when the return has a - purpose, and create a void return type if the function does not - need to return anything.</para> - - - </sect3> - - - <sect3 id="s28"><title>Minimize function calls when iterating by - using variables</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>It is easy to write the following code, and a clear argument - can be made that the code is easy to understand:</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -for ( size_t cnt = 0; cnt < block_list_length(); cnt++ ) -{ - .... -}</programlisting> - - <para><emphasis>Note:</emphasis> Unfortunately, this makes a function call for - each and every iteration. This increases the overhead in the - program, because the compiler has to look up the function each - time, call it, and return a value. Depending on what occurs in - the block_list_length() call, it might even be creating and - destroying structures with each iteration, even though in each - case it is comparing "cnt" to the same value, over and over. - Remember too - even a call to block_list_length() is a function - call, with the same overhead.</para> - - <para>Instead of using a function call during the iterations, - assign the value to a variable, and evaluate using the - variable.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -size_t len = block_list_length(); - -for ( size_t cnt = 0; cnt < len; cnt++ ) -{ - .... -}</programlisting> - - <para><emphasis>Exceptions:</emphasis> if the value of block_list_length() - *may* change or could *potentially* change, then you must code the - function call in the for/while loop.</para> - - - </sect3> - - - <sect3 id="s29"><title>Pass and Return by Const Reference</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>This allows a developer to define a const pointer and call - your function. If your function does not have the const - keyword, we may not be able to use your function. Consider - strcmp, if it were defined as: extern int strcmp( char *s1, - char *s2 );</para> - - <para>I could then not use it to compare argv's in main: int main( - int argc, const char *argv[] ) { strcmp( argv[0], "privoxy" - ); }</para> - - <para>Both these pointers are *const*! If the c runtime library - maintainers do it, we should too.</para> - - - </sect3> - - - <sect3 id="s30"><title>Pass and Return by Value</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Most structures cannot fit onto a normal stack entry (i.e. - they are not 4 bytes or less). Aka, a function declaration - like: int load_aclfile( struct client_state csp )</para> - - <para>would not work. So, to be consistent, we should declare all - prototypes with "pass by value": int load_aclfile( struct - client_state *csp )</para> - - - </sect3> - - - <sect3 id="s31"><title>Names of include files</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Your include statements should contain the file name without - a path. The path should be listed in the Makefile, using -I as - processor directive to search the indicated paths. An exception - to this would be for some proprietary software that utilizes a - partial path to distinguish their header files from system or - other header files.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -#include <iostream.h> /* This is not a local include */ -#include "config.h" /* This IS a local include */ -</programlisting> - - <para><emphasis>Exception:</emphasis></para> - - <para> -<programlisting> -/* This is not a local include, but requires a path element. */ -#include <sys/fileName.h> -</programlisting> -</para> - - <para><emphasis>Note:</emphasis> Please! do not add "-I." to the Makefile - without a _very_ good reason. This duplicates the #include - "file.h" behavior.</para> - - - </sect3> - - - <sect3 id="s32"><title>Provide multiple inclusion - protection</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Prevents compiler and linker errors resulting from - redefinition of items.</para> - - <para>Wrap each header file with the following syntax to prevent - multiple inclusions of the file. Of course, replace PROJECT_H - with your file name, with "." Changed to "_", and make it - uppercase.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -#ifndef PROJECT_H_INCLUDED -#define PROJECT_H_INCLUDED - ... -#endif /* ndef PROJECT_H_INCLUDED */ -</programlisting> - </sect3> - - - <sect3 id="s33"><title>Use `extern "C"` when appropriate</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>If our headers are included from C++, they must declare our - functions as `extern "C"`. This has no cost in C, but increases - the potential re-usability of our code.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -#ifdef __cplusplus -extern "C" -{ -#endif /* def __cplusplus */ - -... function definitions here ... - -#ifdef __cplusplus -} -#endif /* def __cplusplus */ -</programlisting> - </sect3> - - - <sect3 id="s34"><title>Where Possible, Use Forward Struct - Declaration Instead of Includes</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Useful in headers that include pointers to other struct's. - Modifications to excess header files may cause needless - compiles.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -/********************************************************************* - * We're avoiding an include statement here! - *********************************************************************/ -struct file_list; -extern file_list *xyz;</programlisting> - - <para><emphasis>Note:</emphasis> If you declare "file_list xyz;" (without the - pointer), then including the proper header file is necessary. - If you only want to prototype a pointer, however, the header - file is unnecessary.</para> - - <para><emphasis>Status:</emphasis> Use with discretion.</para> - - - </sect3> - </sect2> - - <sect2 id="s35"><title>General Coding Practices</title> - - - - <sect3 id="s36"><title>Turn on warnings</title> - - <para><emphasis>Explanation</emphasis></para> - - <para>Compiler warnings are meant to help you find bugs. You - should turn on as many as possible. With GCC, the switch is - "-Wall". Try and fix as many warnings as possible.</para> - - - </sect3> - - - <sect3 id="s37"><title>Provide a default case for all switch - statements</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>What you think is guaranteed is never really guaranteed. The - value that you don't think you need to check is the one that - someday will be passed. So, to protect yourself from the - unknown, always have a default step in a switch statement.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -switch( hash_string( cmd ) ) -{ - case hash_actions_file : - ... code ... - break; - - case hash_confdir : - ... code ... - break; - - default : - log_error( ... ); - ... anomaly code goes here ... - continue; / break; / exit( 1 ); / etc ... - -} /* end switch( hash_string( cmd ) ) */</programlisting> - - <para><emphasis>Note:</emphasis> If you already have a default condition, you - are obviously exempt from this point. Of note, most of the - WIN32 code calls `DefWindowProc' after the switch statement. - This API call *should* be included in a default statement.</para> - - <para><emphasis>Another Note:</emphasis> This is not so much a readability issue - as a robust programming issue. The "anomaly code goes here" may - be no more than a print to the STDERR stream (as in - load_config). Or it may really be an abort condition.</para> - - <para><emphasis>Status:</emphasis> Programmer discretion is advised.</para> - - - </sect3> - - - <sect3 id="s38"><title>Try to avoid falling through cases in a - switch statement.</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>In general, you will want to have a 'break' statement within - each 'case' of a switch statement. This allows for the code to - be more readable and understandable, and furthermore can - prevent unwanted surprises if someone else later gets creative - and moves the code around.</para> - - <para>The language allows you to plan the fall through from one - case statement to another simply by omitting the break - statement within the case statement. This feature does have - benefits, but should only be used in rare cases. In general, - use a break statement for each case statement.</para> - - <para>If you choose to allow fall through, you should comment both - the fact of the fall through and reason why you felt it was - necessary.</para> - - - </sect3> - - - <sect3 id="s39"><title>Use 'long' or 'short' Instead of - 'int'</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>On 32-bit platforms, int usually has the range of long. On - 16-bit platforms, int has the range of short.</para> - - <para><emphasis>Status:</emphasis> open-to-debate. In the case of most FSF - projects (including X/GNU-Emacs), there are typedefs to int4, - int8, int16, (or equivalence ... I forget the exact typedefs - now). Should we add these to IJB now that we have a "configure" - script?</para> - - - </sect3> - - - <sect3 id="s40"><title>Don't mix size_t and other types</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>The type of size_t varies across platforms. Do not make - assumptions about whether it is signed or unsigned, or about - how long it is. Do not compare a size_t against another - variable of a different type (or even against a constant) - without casting one of the values.</para> - - - </sect3> - - - <sect3 id="s41"><title>Declare each variable and struct on its - own line.</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>It can be tempting to declare a series of variables all on - one line. Don't.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -long a = 0; -long b = 0; -long c = 0;</programlisting> - - <para><emphasis>Instead of:</emphasis></para> - - <para>long a, b, c;</para> - - <para><emphasis>Explanation:</emphasis> - there is more room for comments on the - individual variables - easier to add new variables without - messing up the original ones - when searching on a variable to - find its type, there is less clutter to "visually" - eliminate</para> - - <para><emphasis>Exceptions:</emphasis> when you want to declare a bunch of loop - variables or other trivial variables; feel free to declare them - on one line. You should, although, provide a good comment on - their functions.</para> - - <para><emphasis>Status:</emphasis> developer-discretion.</para> - - - </sect3> - - - <sect3 id="s42"><title>Use malloc/zalloc sparingly</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>Create a local struct (on the stack) if the variable will - live and die within the context of one function call.</para> - - <para>Only "malloc" a struct (on the heap) if the variable's life - will extend beyond the context of one function call.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -If a function creates a struct and stores a pointer to it in a -list, then it should definitely be allocated via `malloc'. -</programlisting> - </sect3> - - - <sect3 id="s43"><title>The Programmer Who Uses 'malloc' is - Responsible for Ensuring 'free'</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>If you have to "malloc" an instance, you are responsible for - insuring that the instance is `free'd, even if the deallocation - event falls within some other programmer's code. You are also - responsible for ensuring that deletion is timely (i.e. not too - soon, not too late). This is known as "low-coupling" and is a - "good thing (tm)". You may need to offer a - free/unload/destructor type function to accommodate this.</para> - - <para><emphasis>Example:</emphasis></para> -<programlisting> -int load_re_filterfile( struct client_state *csp ) { ... } -static void unload_re_filterfile( void *f ) { ... }</programlisting> - - <para><emphasis>Exceptions:</emphasis></para> - - <para>The developer cannot be expected to provide `free'ing - functions for C run-time library functions ... such as - `strdup'.</para> - - <para><emphasis>Status:</emphasis> developer-discretion. The "main" use of this - standard is for allocating and freeing data structures (complex - or nested).</para> - - - </sect3> - - - <sect3 id="s44"><title>Add loaders to the `file_list' structure - and in order</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>I have ordered all of the "blocker" file code to be in alpha - order. It is easier to add/read new blockers when you expect a - certain order.</para> - - <para><emphasis>Note:</emphasis> It may appear that the alpha order is broken in - places by POPUP tests coming before PCRS tests. But since - POPUPs can also be referred to as KILLPOPUPs, it is clear that - it should come first.</para> - - - </sect3> - - - <sect3 id="s45"><title>"Uncertain" new code and/or changes to - existing code, use FIXME or XXX</title> - - <para><emphasis>Explanation:</emphasis></para> - - <para>If you have enough confidence in new code or confidence in - your changes, but are not *quite* sure of the repercussions, - add this:</para> - - <para>/* FIXME: this code has a logic error on platform XYZ, * - attempting to fix */ #ifdef PLATFORM ...changed code here... - #endif</para> - - <para>or:</para> - - <para>/* FIXME: I think the original author really meant this... - */ ...changed code here...</para> - - <para>or:</para> - - <para>/* FIXME: new code that *may* break something else... */ - ...new code here...</para> - - <para><emphasis>Note:</emphasis> If you make it clear that this may or may not - be a "good thing (tm)", it will be easier to identify and - include in the project (or conversely exclude from the - project).</para> - - - </sect3> - - </sect2> - - <sect2 id="s46"><title>Addendum: Template for files and function - comment blocks:</title> - - <para><emphasis>Example for file comments:</emphasis></para> -<programlisting> -const char FILENAME_rcs[] = "$Id$"; -/********************************************************************* - * - * File : $Source$ - * - * Purpose : (Fill me in with a good description!) - * - * Copyright : Written by and Copyright (C) 2001-2009 - * the Privoxy team. http://www.privoxy.org/ - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 , - * USA - * - * Revisions : - * $Log$ - * - *********************************************************************/ - - -#include "config.h" - - ...necessary include files for us to do our work... - -const char FILENAME_h_rcs[] = FILENAME_H_VERSION; -</programlisting> - - <para><emphasis>Note:</emphasis> This declares the rcs variables that should be - added to the "show-proxy-args" page. If this is a brand new - creation by you, you are free to change the "Copyright" section - to represent the rights you wish to maintain.</para> - - <para><emphasis>Note:</emphasis> The formfeed character that is present right - after the comment flower box is handy for (X|GNU)Emacs users to - skip the verbiage and get to the heart of the code (via - `forward-page' and `backward-page'). Please include it if you - can.</para> - - <para><emphasis>Example for file header comments:</emphasis></para> -<programlisting> -#ifndef _FILENAME_H -#define _FILENAME_H -#define FILENAME_H_VERSION "$Id$" -/********************************************************************* - * - * File : $Source$ - * - * Purpose : (Fill me in with a good description!) - * - * Copyright : Written by and Copyright (C) 2001-2009 - * the Privoxy team. http://www.privoxy.org/ - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 , - * USA - * - * Revisions : - * $Log$ - * - *********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - - ... function headers here ... - - -/* Revision control strings from this header and associated .c file */ -extern const char FILENAME_rcs[]; -extern const char FILENAME_h_rcs[]; - - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef _FILENAME_H */ - -/* - Local Variables: - tab-width: 3 - end: -*/ -</programlisting> - - <para><emphasis>Example for function comments:</emphasis></para> -<programlisting> -/********************************************************************* - * - * Function : FUNCTION_NAME - * - * Description : (Fill me in with a good description!) - * - * parameters : - * 1 : param1 = pointer to an important thing - * 2 : x = pointer to something else - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int FUNCTION_NAME( void *param1, const char *x ) -{ - ... - return( 0 ); - -} -</programlisting> - - <para><emphasis>Note:</emphasis> If we all follow this practice, we should be - able to parse our code to create a "self-documenting" web - page.</para> - - </sect2> - - </sect1> - -  - <sect1 id="testing"><title>Testing Guidelines</title> - <para>To be filled. -</para> - -  - <sect2 id="testing-plan"><title>Testplan for releases</title> - <para> - Explain release numbers. major, minor. developer releases. etc. - -<orderedlist numeration="arabic"> - <listitem><para> -Remove any existing rpm with rpm -e -</para></listitem> - <listitem><para> -Remove any file that was left over. This includes (but is not limited to) - <itemizedlist> - <listitem><para>/var/log/privoxy</para></listitem> - <listitem><para>/etc/privoxy</para></listitem> - <listitem><para>/usr/sbin/privoxy</para></listitem> - <listitem><para>/etc/init.d/privoxy</para></listitem> - <listitem><para>/usr/doc/privoxy*</para></listitem> - </itemizedlist> -</para></listitem> - <listitem><para> -Install the rpm. Any error messages? -</para></listitem> - <listitem><para>start,stop,status <application>Privoxy</application> with the specific script - (e.g. /etc/rc.d/init/privoxy stop). Reboot your machine. Does - autostart work?</para></listitem> - <listitem><para>Start browsing. Does <application>Privoxy</application> work? Logfile written?</para></listitem> - <listitem><para>Remove the rpm. Any error messages? All files removed?</para></listitem> - </orderedlist> -</para> - </sect2> - -  - <sect2 id="testing-report"><title>Test reports</title> - <para> -Please submit test reports only with the <ulink url="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=395005">test form</ulink> -at sourceforge. Three simple steps: - <itemizedlist> - - <listitem><para>Select category: the distribution you test on.</para></listitem> - <listitem><para>Select group: the version of <application>Privoxy</application> that we are about to release.</para></listitem> - <listitem><para>Fill the Summary and Detailed Description with something - intelligent (keep it short and precise).</para> - </listitem> - </itemizedlist> - Do not mail to the mailing list (we cannot keep track on issues there). - </para> - </sect2> - - </sect1> - -  - <sect1 id="newrelease"><title>Releasing a New Version</title> - <para> - When we release versions of <application>Privoxy</application>, - our work leaves our cozy secret lab and has to work in the cold - RealWorld[tm]. Once it is released, there is no way to call it - back, so it is very important that great care is taken to ensure - that everything runs fine, and not to introduce problems in the - very last minute. - </para> - <para> - So when releasing a new version, please adhere exactly to the - procedure outlined in this chapter. - </para> - - <para> - The following programs are required to follow this process: - <filename>ncftpput</filename> (ncftp), <filename>scp, ssh</filename> (ssh), - <filename>gmake</filename> (GNU's version of make), autoconf, cvs. - </para> - - <sect2 id="versionnumbers"> - <title>Version numbers</title> - - <para> - First you need to determine which version number the release will have. - <application>Privoxy</application> version numbers consist of three numbers, - separated by dots, like in X.Y.Z (e.g. 3.0.0), where: - <itemizedlist> - <listitem> - <para> - X, the version major, is rarely ever changed. It is increased by one if - turning a development branch into stable substantially changes the functionality, - user interface or configuration syntax. Majors 1 and 2 were - <application>Junkbuster</application>, and 3 will be the first stable - <application>Privoxy</application> release. - </para> - </listitem> - <listitem> - <para> - Y, the version minor, represents the branch within the major version. - At any point in time, there are two branches being maintained: - The stable branch, with an even minor, say, 2N, in which no functionality is - being added and only bug-fixes are made, and 2N+1, the development branch, in - which the further development of <application>Privoxy</application> takes - place. - This enables us to turn the code upside down and inside out, while at the same time - providing and maintaining a stable version. - The minor is reset to zero (and one) when the major is incremented. When a development - branch has matured to the point where it can be turned into stable, the old stable branch - 2N is given up (i.e. no longer maintained), the former development branch 2N+1 becomes the - new stable branch 2N+2, and a new development branch 2N+3 is opened. - </para> - </listitem> - <listitem> - <para> - Z, the point or sub version, represents a release of the software within a branch. - It is therefore incremented immediately before each code freeze. - In development branches, only the even point versions correspond to actual releases, - while the odd ones denote the evolving state of the sources on CVS in between. - It follows that Z is odd on CVS in development branches most of the time. There, it gets - increased to an even number immediately before a code freeze, and is increased to an odd - number again immediately thereafter. - This ensures that builds from CVS snapshots are easily distinguished from released versions. - The point version is reset to zero when the minor changes. - </para> - <para> - Stable branches work a little differently, since there should be - little to no development happening in such branches. Remember, - only bugfixes, which presumably should have had some testing - before being committed. Stable branches will then have their - version reported as <literal>0.0.0</literal>, during that period - between releases when changes are being added. This is to denote - that this code is <emphasis>not for release</emphasis>. Then - as the release nears, the version is bumped according: e.g. - <literal>3.0.1 -> 0.0.0 -> 3.0.2</literal>. - </para> - </listitem> - </itemizedlist> - </para> - <para> - In summary, the main CVS trunk is the development branch where new - features are being worked on for the next stable series. This should - almost always be where the most activity takes place. There is always at - least one stable branch from the trunk, e.g now it is - <literal>3.0</literal>, which is only used to release stable versions. - Once the initial *.0 release of the stable branch has been done, then as a - rule, only bugfixes that have had prior testing should be committed to - the stable branch. Once there are enough bugfixes to justify a new - release, the version of this branch is again incremented Example: 3.0.0 - -> 3.0.1 -> 3.0.2, etc are all stable releases from within the stable - branch. 3.1.x is currently the main trunk, and where work on 3.2.x is - taking place. If any questions, please post to the devel list - <emphasis>before</emphasis> committing to a stable branch! - </para> - <para> - Developers should remember too that if they commit a bugfix to the stable - branch, this will more than likely require a separate submission to the - main trunk, since these are separate development trees within CVS. If you - are working on both, then this would require at least two separate check - outs (i.e main trunk, <emphasis>and</emphasis> the stable release branch, - which is <literal>v_3_0_branch</literal> at the moment). - </para> - - </sect2> - - <sect2 id="beforerelease"> - <title>Before the Release: Freeze</title> - <para> - The following <emphasis>must be done by one of the - developers</emphasis> prior to each new release. - </para> - <para> - <itemizedlist> - <listitem> - <para> - Make sure that everybody who has worked on the code in the last - couple of days has had a chance to yell <quote>no!</quote> in case - they have pending changes/fixes in their pipelines. Announce the - freeze so that nobody will interfere with last minute changes. - </para> - </listitem> - <listitem> - <para> - Increment the version number (point from odd to even in development - branches!) in <filename>configure.in</filename>. (RPM spec files - will need to be incremented as well.) - </para> - </listitem> - <listitem> - <para> - If <filename>default.action</filename> has changed since last - release (i.e. software release or standalone actions file release), - bump up its version info to A.B in this line: - </para> - <para> - <programlisting> - {+add-header{X-Actions-File-Version: A.B} -filter -no-popups} -</programlisting> - </para> - <para> - Then change the version info in doc/webserver/actions/index.php, - line: '$required_actions_file_version = "A.B";' - </para> - </listitem> - <listitem> - <para> - All documentation should be rebuild after the version bump. - Finished docs should be then be committed to CVS (for those - without the ability to build these). Some docs may require - rather obscure processing tools. <filename>config</filename>, - the man page (and the html version of the man page), and the PDF docs - fall in this category. REAMDE, the man page, AUTHORS, and config - should all also be committed to CVS for other packagers. The - formal docs should be uploaded to the webserver. See the - Section "Updating the webserver" in this manual for details. - </para> - </listitem> - <listitem> - <para> - The <citetitle>User Manual</citetitle> is also used for context - sensitive help for the CGI editor. This is version sensitive, so that - the user will get appropriate help for his/her release. So with - each release a fresh version should be uploaded to the webserver - (this is in addition to the main <citetitle>User Manual</citetitle> - link from the main page since we need to keep manuals for various - versions available). The CGI pages will link to something like - <literal>http://privoxy.org/$(VERSION)/user-manual/</literal>. This - will need to be updated for each new release. There is no Makefile - target for this at this time!!! It needs to be done manually. - </para> - </listitem> - <listitem> - <para> - All developers should look at the <filename>ChangeLog</filename> and - make sure noteworthy changes are referenced. - </para> - </listitem> - <listitem> - <para> - <emphasis>Commit all files that were changed in the above steps!</emphasis> - </para> - </listitem> - <listitem> - <para> - Tag all files in CVS with the version number with - <quote><command>cvs tag v_X_Y_Z</command></quote>. - Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc. - </para> - </listitem> - <listitem> - <para> - If the release was in a development branch, increase the point version - from even to odd (X.Y.(Z+1)) again in <filename>configure.in</filename> and - commit your change. - </para> - </listitem> - <listitem> - <para> - On the webserver, copy the user manual to a new top-level directory - called <filename>X.Y.Z</filename>. This ensures that help links from the CGI - pages, which have the version as a prefix, will go into the right version of the manual. - If this is a development branch release, also symlink <filename>X.Y.(Z-1)</filename> - to <filename>X.Y.Z</filename> and <filename>X.Y.(Z+1)</filename> to - <filename>.</filename> (i.e. dot). - </para> - </listitem> - </itemizedlist> - </para> - </sect2> - - <sect2 id="therelease"> - <title>Building and Releasing the Packages</title> - <para> - Now the individual packages can be built and released. Note that for - GPL reasons the first package to be released is always the source tarball. - </para> - - <para> - For <emphasis>all</emphasis> types of packages, including the source tarball, - <emphasis>you must make sure that you build from clean sources by exporting - the right version from CVS into an empty directory</emphasis> (just press return when - asked for a password): - </para> - - <para> - <programlisting> - mkdir dist # delete or choose different name if it already exists - cd dist - cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current -</programlisting> - </para> - - <para> - <emphasis>Do NOT change</emphasis> a single bit, including, but not limited to - version information after export from CVS. This is to make sure that - all release packages, and with them, all future bug reports, are based - on exactly the same code. - </para> - - <warning> - <para> - Every significant release of Privoxy has included at least one - package that either had incorrect versions of files, missing files, - or incidental leftovers from a previous build process that gave - unknown numbers of users headaches to try to figure out what was - wrong. PLEASE, make sure you are using pristene sources, and are - following the prescribed process! - </para> - </warning> - - <para> - Please find additional instructions for the source tarball and the - individual platform dependent binary packages below. And details - on the Sourceforge release process below that. - </para> - - <sect3 id="pack-guidelines"> - <title>Note on Privoxy Packaging</title> - <para> - Please keep these general guidelines in mind when putting together - your package. These apply to <emphasis>all</emphasis> platforms! - </para> - <para> - <itemizedlist> - <listitem> - <para> - <application>Privoxy</application> <emphasis>requires</emphasis> - write access to: all <filename>*.action</filename> files, all - logfiles, and the <filename>trust</filename> file. You will - need to determine the best way to do this for your platform. - </para> - </listitem> - <listitem> - <para> - Please include up to date documentation. At a bare minimum: - </para> - <simplelist> - <member> - <filename>LICENSE</filename> (top-level directory) - </member> - </simplelist> - <simplelist> - <member> - <filename>README</filename> (top-level directory) - </member> - </simplelist> - <simplelist> - <member> - <filename>AUTHORS</filename> (top-level directory) - </member> - </simplelist> - <simplelist> - <member> - <filename>man page</filename> (top-level directory, Unix-like - platforms only) - </member> - </simplelist> - <simplelist> - <member> - <filename>The User Manual</filename> (doc/webserver/user-manual/) - </member> - </simplelist> - <simplelist> - <member> - <filename>FAQ</filename> (doc/webserver/faq/) - </member> - </simplelist> - <para> - Also suggested: <filename>Developer Manual</filename> - (doc/webserver/developer-manual) and <filename>ChangeLog</filename> - (top-level directory). <filename>FAQ</filename> and the manuals are - HTML docs. There are also text versions in - <filename>doc/text/</filename> which could conceivably also be - included. - </para> - <para> - The documentation has been designed such that the manuals are linked - to each other from parallel directories, and should be packaged - that way. <filename>privoxy-index.html</filename> can also be - included and can serve as a focal point for docs and other links of - interest (and possibly renamed to <filename>index.html</filename>). - This should be one level up from the manuals. There is a link also - on this page to an HTMLized version of the man page. To avoid 404 for - this, it is in CVS as - <filename>doc/webserver/man-page/privoxy-man-page.html</filename>, - and should be included along with the manuals. There is also a - css stylesheets that can be included for better presentation: - <filename>p_doc.css</filename>. This should be in the same directory - with <filename>privoxy-index.html</filename>, (i.e. one level up from - the manual directories). - </para> - </listitem> - <listitem> - <para> - <filename>user.action</filename> and <filename>user.filter</filename> - are designed for local preferences. Make sure these do not get overwritten! - <filename>config</filename> should not be overwritten either. This - has especially important configuration data in it. - <filename>trust</filename> should be left in tact as well. - </para> - </listitem> - <listitem> - <para> - Other configuration files (<filename>default.action</filename> and - <filename>default.filter</filename>) should be installed as the new - defaults, but all previously installed configuration files should be - preserved as backups. This is just good manners :-) These files are - likely to change between releases and contain important new features - and bug fixes. - </para> - </listitem> - <listitem> - <para> - Please check platform specific notes in this doc, if you haven't - done <quote>Privoxy</quote> packaging before for other platform - specific issues. Conversely, please add any notes that you know - are important for your platform (or contact one of the doc - maintainers to do this if you can't). - </para> - </listitem> - <listitem> - <para> - Packagers should do a <quote>clean</quote> install of their - package after building it. So any previous installs should be - removed first to ensure the integrity of the newly built package. - Then run the package for a while to make sure there are no - obvious problems, before uploading. - </para> - </listitem> - - </itemizedlist> - </para> - - </sect3> - - <sect3 id="newrelease-tarball"><title>Source Tarball</title> - <para> - First, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then run: - </para> - <para> - <programlisting> - cd current - autoheader && autoconf && ./configure -</programlisting> - </para> - <para> - Then do: - </para> - <para> - <programlisting> - make tarball-dist -</programlisting> - </para> - <para> - To upload the package to Sourceforge, simply issue - </para> - <para> - <programlisting> - make tarball-upload -</programlisting> - </para> - <para> - Go to the displayed URL and release the file publicly on Sourceforge. - For the change log field, use the relevant section of the - <filename>ChangeLog</filename> file. - </para> - </sect3> - - <sect3 id="newrelease-rpm"><title>SuSE, Conectiva or Red Hat RPM</title> - <para> - In following text, replace <replaceable class="parameter">dist</replaceable> - with either <quote>rh</quote> for Red Hat or <quote>suse</quote> for SuSE. - </para> - <para> - First, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). - </para> - <para> - As the only exception to not changing anything after export from CVS, - now examine the file <filename>privoxy-</filename><replaceable class="parameter">dist</replaceable><filename>.spec</filename> - and make sure that the version information and the RPM release number are - correct. The RPM release numbers for each version start at one. Hence it must - be reset to one if this is the first RPM for - <replaceable class="parameter">dist</replaceable> which is built from version - X.Y.Z. Check the - <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118">file - list</ulink> if unsure. Else, it must be set to the highest already available RPM - release number for that version plus one. - </para> - <para> - Then run: - </para> - <para> - <programlisting> - cd current - autoheader && autoconf && ./configure -</programlisting> - </para> - <para> - Then do - </para> - <para> - <programlisting> - make <replaceable class="parameter">dist</replaceable>-dist -</programlisting> - </para> - <para> - To upload the package to Sourceforge, simply issue - </para> - <para> - <programlisting> - make <replaceable class="parameter">dist</replaceable>-upload <replaceable class="parameter">rpm_packagerev</replaceable> -</programlisting> - </para> - <para> - where <replaceable class="parameter">rpm_packagerev</replaceable> is the - RPM release number as determined above. - Go to the displayed URL and release the file publicly on Sourceforge. - Use the release notes and change log from the source tarball package. - </para> - </sect3> - - <sect3 id="newrelease-os2"><title>OS/2</title> - <para> - First, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then get the OS/2 Setup module: - </para> - <para> - <programlisting> - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co os2setup -</programlisting> - </para> - <para> - You will need a mix of development tools. - The main compilation takes place with IBM Visual Age C++. - Some ancillary work takes place with GNU tools, available from - various sources like hobbes.nmsu.edu. - Specificially, you will need <filename>autoheader</filename>, - <filename>autoconf</filename> and <filename>sh</filename> tools. - The packaging takes place with WarpIN, available from various sources, including - its home page: <ulink url="http://www.xworkplace.org/">xworkplace</ulink>. - </para> - <para> - Change directory to the <filename>os2setup</filename> directory. - Edit the os2build.cmd file to set the final executable filename. - For example, - </para> - <para> - <programlisting> - installExeName='privoxyos2_setup_X.Y.Z.exe' -</programlisting> - </para> - <para> - Next, edit the <filename>IJB.wis</filename> file so the release number matches - in the <filename>PACKAGEID</filename> section: - </para> - <para> - <programlisting> - PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z" -</programlisting> - </para> - <para> - You're now ready to build. Run: - </para> - <para> - <programlisting> - os2build -</programlisting> - </para> - <para> - You will find the WarpIN-installable executable in the - <filename>./files</filename> directory. Upload this anonymously to - <filename>uploads.sourceforge.net/incoming</filename>, create a release - for it, and you're done. Use the release notes and Change Log from the - source tarball package. - </para> - </sect3> - - <sect3 id="newrelease-solaris"><title>Solaris</title> - <para> - Login to Sourceforge's compilefarm via ssh: - </para> - <para> - <programlisting> - ssh cf.sourceforge.net -</programlisting> - </para> - <para> - Choose the right operating system (not the Debian one). - When logged in, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then run: - </para> - <para> - <programlisting> - cd current - autoheader && autoconf && ./configure -</programlisting> - </para> - <para> - Then run - </para> - <para> - <programlisting> - gmake solaris-dist -</programlisting> - </para> - <para> - which creates a gzip'ed tar archive. Sadly, you cannot use <command>make - solaris-upload</command> on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. Use the release notes and Change Log from the - source tarball package. - </para> - </sect3> - - <sect3 id="newrelease-windows"><title>Windows</title> - <para> - You should ensure you have the latest version of Cygwin (from - <ulink url="http://www.cygwin.com/">http://www.cygwin.com/</ulink>). - Run the following commands from within a Cygwin bash shell. - </para> - <para> - First, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then get the Windows setup module: - </para> - <para> - <programlisting> - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co winsetup -</programlisting> - </para> - <para> - Then you can build the package. This is fully automated, and is - controlled by <filename>winsetup/GNUmakefile</filename>. - All you need to do is: - </para> - <para> - <programlisting> - cd winsetup - make -</programlisting> - </para> - <para> - Now you can manually rename <filename>privoxy_setup.exe</filename> to - <filename>privoxy_setup_X_Y_Z.exe</filename>, and upload it to - SourceForge. When releasing the package on SourceForge, use the release notes - and Change Log from the source tarball package. - </para> - </sect3> - - <sect3 id="newrelease-debian"><title>Debian</title> - <para> - First, <emphasis>make sure that you have freshly exported the - right version into an empty directory</emphasis>. (See - "Building and releasing packages" above). Then add a log - entry to <filename>debian/changelog</filename>, if it is not - already there, for example by running: - </para> - <para> - <programlisting> - debchange -v &p-version;-&p-status;-1 "New upstream version" -</programlisting> - </para> - <para> - Then, run: - </para> - <para> - <programlisting> - dpkg-buildpackage -rfakeroot -us -uc -b -</programlisting> - </para> - <para> - This will create - <filename>../privoxy_&p-version;-&p-status;-1_i386.deb</filename> - which can be uploaded. To upload the package to Sourceforge, simply - issue - </para> - <para> - <programlisting> - make debian-upload -</programlisting> - </para> - </sect3> - - <sect3 id="newrelease-macosx"><title>Mac OS X</title> - <para> - First, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then get the Mac OS X setup module: - </para> - <para> - <programlisting> - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co osxsetup -</programlisting> - </para> - <para> - Then run: - </para> - <para> - <programlisting> - cd osxsetup - build -</programlisting> - </para> - <para> - This will run <filename>autoheader</filename>, <filename>autoconf</filename> and - <filename>configure</filename> as well as <filename>make</filename>. - Finally, it will copy over the necessary files to the ./osxsetup/files directory - for further processing by <filename>PackageMaker</filename>. - </para> - <para> - Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package - name to match the release, and hit the "Create package" button. - If you specify ./Privoxy.pkg as the output package name, you can then create - the distributable zip file with the command: - </para> - <para> - <programlisting> - zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg -</programlisting> - </para> - <para> - You can then upload <filename>privoxyosx_setup_x.y.z.zip</filename> anonymously to - <filename>uploads.sourceforge.net/incoming</filename>, - create a release for it, and you're done. Use the release notes - and Change Log from the source tarball package. - </para> - </sect3> - - <sect3 id="newrelease-freebsd"><title>FreeBSD</title> - <para> - Login to Sourceforge's compile-farm via ssh: - </para> - <para> - <programlisting> - ssh cf.sourceforge.net -</programlisting> - </para> - <para> - Choose the right operating system. - When logged in, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then run: - </para> - <para> - <programlisting> - cd current - autoheader && autoconf && ./configure -</programlisting> - </para> - <para> - Then run: - </para> - <para> - <programlisting> - gmake freebsd-dist -</programlisting> - </para> - <para> - which creates a gzip'ed tar archive. Sadly, you cannot use <command>make - freebsd-upload</command> on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. Use the release notes and Change Log from the - source tarball package. - </para> - </sect3> - - <sect3 id="newrelease-hpux"><title>HP-UX 11</title> - <para> - First, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then run: - </para> - <para> - <programlisting> - cd current - autoheader && autoconf && ./configure -</programlisting> - </para> - <para> - Then do FIXME. - </para> - </sect3> - - <sect3 id="newrelease-amiga"><title>Amiga OS</title> - <para> - First, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then run: - </para> - <para> - <programlisting> - cd current - autoheader && autoconf && ./configure -</programlisting> - </para> - <para> - Then do FIXME. - </para> - </sect3> - - <sect3 id="newrelease-aix"><title>AIX</title> - <para> - Login to Sourceforge's compilefarm via ssh: - </para> - <para> - <programlisting> - ssh cf.sourceforge.net -</programlisting> - </para> - <para> - Choose the right operating system. - When logged in, <emphasis>make sure that you have freshly exported the right - version into an empty directory</emphasis>. (See "Building and releasing - packages" above). Then run: - </para> - <para> - <programlisting> - cd current - autoheader && autoconf && ./configure -</programlisting> - </para> - <para> - Then run: - </para> - <para> - <programlisting> - make aix-dist -</programlisting> - </para> - <para> - which creates a gzip'ed tar archive. Sadly, you cannot use <command>make - aix-upload</command> on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. Use the release notes and Change Log from the - source tarball package. - </para> - </sect3> - </sect2> - - <sect2 id="releasing"> - <title>Uploading and Releasing Your Package</title> - <para> - After the package is ready, it is time to upload it - to SourceForge, and go through the release steps. The upload - is done via FTP: - </para> - <para> - <itemizedlist> - <listitem> - <para> - Upload to: <ulink url="ftp://upload.sourceforge.net/incoming">ftp://upload.sourceforge.net/incoming</ulink> - </para> - </listitem> - <listitem> - <para> - user: <literal>anonymous</literal> - </para> - </listitem> - <listitem> - <para> - password: <literal>ijbswa-developers(a)lists.sourceforge.net</literal> - </para> - </listitem> - </itemizedlist> - </para> - <para> - Or use the <command>make</command> targets as described above. - </para> - <para> - Once this done go to <ulink - url="https://sourceforge.net/project/admin/editpackages.php?group_id=11118" - >https://sourceforge.net/project/admin/editpackages.php?group_id=11118</ulink>, - making sure you are logged in. Find your target platform in the - second column, and click <literal>Add Release</literal>. You will - then need to create a new release for your package, using the format - of <literal>$VERSION ($CODE_STATUS)</literal>, e.g. <emphasis>&p-version; - (beta)</emphasis>. - </para> - <para> - Now just follow the prompts. Be sure to add any appropriate Release - notes. You should see your freshly uploaded packages in - <quote>Step 2. Add Files To This Release</quote>. Check the - appropriate box(es). Remember at each step to hit the - <quote>Refresh/Submit</quote> buttons! You should now see your - file(s) listed in Step 3. Fill out the forms with the appropriate - information for your platform, being sure to hit <quote>Update</quote> - for each file. If anyone is monitoring your platform, check the - <quote>email</quote> box at the very bottom to notify them of - the new package. This should do it! - </para> - <para> - If you have made errors, or need to make changes, you can go through - essentially the same steps, but select <literal>Edit Release</literal>, - instead of <literal>Add Release</literal>. - </para> - </sect2> - - <sect2 id="afterrelease"> - <title>After the Release</title> - <para> - When all (or: most of the) packages have been uploaded and made available, - send an email to the <ulink url="mailto:ijbswa-announce@lists.sourceforge.net">announce - mailing list</ulink>, Subject: "Version X.Y.Z available for download". Be sure to - include the - <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118">download - location</ulink>, the release notes and the Changelog. Also, post an - updated News item on the project page Sourceforge, and update the Home - page and docs linked from the Home page (see below). Other news sites - and release oriented sites, such as Freshmeat, should also be notified. - </para> - </sect2> - - </sect1> - -  - <sect1 id="webserver-update"><title>Update the Webserver</title> - <para> - The webserver should be updated at least with each stable release. When - updating, please follow these steps to make sure that no broken links, - inconsistent contents or permission problems will occur (as it has many - times in the past!): - </para> - <para> - If you have changed anything in the stable-branch documentation source - SGML files, do: - </para> - <para> - <programlisting> - make dok dok-pdf # (or 'make redhat-dok dok-pdf' if 'make dok' doesn't work for you) -</programlisting> - </para> - <para> - That will generate <filename>doc/webserver/user-manual</filename>, - <filename>doc/webserver/developer-manual</filename>, - <filename>doc/webserver/faq</filename>, - <filename>doc/pdf/*.pdf</filename> and - <filename>doc/webserver/index.html</filename> automatically. - </para> - <para> - If you changed the manual page sources, generate - <filename>doc/webserver/man-page/privoxy-man-page.html</filename> - by running <quote><command>make man</command></quote>. (This is - a separate target due to dependencies on some obscure perl scripts - [now in CVS, but not well tested]. See comments in <filename>GNUmakefile</filename>.) - </para> - <para> - If you want to add new files to the webserver, create them locally in - the <filename>doc/webserver/*</filename> directory (or - create new directories under <filename>doc/webserver</filename>). - </para> - <para> - Next, commit any changes from the above steps to CVS. All set? - If these are docs in the stable branch, then do: - </para> - <para> - <programlisting> - make webserver -</programlisting> - </para> - <para> - This will do the upload to <ulink url="http://www.privoxy.org/">the - webserver</ulink> (www.privoxy.org) and ensure all files and directories - there are group writable. - </para> - <para> - Please do <emphasis>NOT</emphasis> use any other means of transferring - files to the webserver to avoid permission problems. Also, please do not - upload docs from development branches or versions. The publicly posted - docs should be in sync with the last official release. - </para> - </sect1> - -  - <sect1 id="contact"><title>Contacting the developers, Bug Reporting and Feature Requests</title> - - &contacting; - - </sect1> - - - -<sect1 id="copyright"><title>Privoxy Copyright, License and History</title> - - - &copyright; - - - -<sect2><title>License</title> - - &license; - -</sect2> - - - -<sect2><title>History</title> - - &history; - -</sect2> - -</sect1> - -  - <sect1 id="seealso"><title>See also</title> - - &seealso; - - - </sect1> - -  - -</article> diff --git a/external/privoxy/doc/source/faq.sgml b/external/privoxy/doc/source/faq.sgml deleted file mode 100644 index 7684e8e..0000000 --- a/external/privoxy/doc/source/faq.sgml +++ /dev/null @@ -1,3454 +0,0 @@ -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[ -<!entity % dummy "IGNORE"> -<!entity supported SYSTEM "supported.sgml"> -<!entity newfeatures SYSTEM "newfeatures.sgml"> -<!entity p-intro SYSTEM "privoxy.sgml"> -<!entity seealso SYSTEM "seealso.sgml"> -<!entity contacting SYSTEM "contacting.sgml"> -<!entity history SYSTEM "history.sgml"> -<!entity copyright SYSTEM "copyright.sgml"> -<!entity license SYSTEM "license.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-not-stable "IGNORE"> -<!entity % p-stable "INCLUDE"> -<!entity % p-text "IGNORE">  -<!entity % p-doc "INCLUDE">  -<!entity % p-supp-userman "INCLUDE">  -<!entity my-copy "©">  -<!entity % p-newstuff "INCLUDE">  -<!entity % seealso-extra "INCLUDE">  -<!entity my-app "<application>Privoxy</application>"> -]> - - - -<article id="index" class="faq"> -<artheader> -<title>Privoxy Frequently Asked Questions</title> - -<pubdate> - <subscript> - - - <link linkend="copyright">Copyright</link> &my-copy; 2001-2009 by - <ulink url="http://www.privoxy.org/">Privoxy Developers</ulink> - </subscript> -</pubdate> - -<pubdate>$Id: faq.sgml,v 2.58 2009/03/21 12:27:44 fabiankeil Exp $</pubdate> - - - - -<abstract> -<![%dummy;[ -<para> - <comment> - This is here to keep vim syntax file from breaking :/ - If I knew enough to fix it, I would. - PLEASE DO NOT REMOVE! HB: hal(a)foobox.net - </comment> -</para> -]]> - <para> - This FAQ gives quick answers to frequently asked questions about - <ulink url="http://www.privoxy.org/">Privoxy</ulink>. - It is not a substitute for the - <ulink url="../user-manual/index.html"><citetitle>Privoxy User Manual</citetitle></ulink>. - - </para> - - - <para>What is Privoxy?</para> &p-intro; - - - <para> - Please note that this document is a work in progress. This copy represents - the state at the release of version &p-version;. - You can find the latest version of the document at <ulink - url="http://www.privoxy.org/faq/">http://www.privoxy.org/faq/</ulink>. - Please see the <link linkend="contact">Contact section</link> if you want to - contact the developers. - </para> - - - - -</abstract> -</artheader> - - - - -<sect1 id="general"><title>General Information</title> -<sect2 renderas="sect3" id="who-uses"><title>Who should give &my-app; a try?</title> - <para> - Anyone who is interested in security, privacy, or in - finer-grained control over their web and Internet experience. - </para> -</sect2> - -<sect2 renderas="sect3" id="bestchoice"><title>Is Privoxy the best choice for -me?</title> - <para> - &my-app; is certainly a good choice, especially for those who want more - control and security. Those with the willingness to read the documentation - and the ability to fine-tune their installation will benefit the most. - </para> - <para> - One of <application>Privoxy's</application> - strengths is that it is highly configurable giving you the ability to - completely personalize your installation. Being familiar with, or at least - having an interest in learning about <ulink - url="http://en.wikipedia.org/wiki/Http">HTTP</ulink> and other networking - protocols, <ulink url="http://en.wikipedia.org/wiki/Html">HTML</ulink>, and - <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular - Expressions</quote></ulink> - will be a big plus and will help you get the most out of &my-app;. - A new installation just includes a very basic configuration. The user - should take this as a starting point only, and enhance it as he or she - sees fit. In fact, the user is encouraged, and expected to, fine-tune the - configuration. - </para> - <para> - Much of <application>Privoxy's</application> configuration can be done - with a <ulink url="http://en.wikipedia.org/wiki/Web_browser">Web browser</ulink>. - But there are areas where configuration is done using a - <ulink url="http://en.wikipedia.org/wiki/Text_editors">text editor</ulink> - to edit configuration files. Also note that the web-based action editor - doesn't use authentication and should only be enabled in environments - where all clients with access to &my-app; listening port can be trusted. - </para> -</sect2> - -<sect2 renderas="sect3" id="proxymoron"><title>What is a <quote>proxy</quote>? How does -Privoxy work? </title> - <para> - A <ulink url="http://en.wikipedia.org/wiki/Proxy_server">web proxy</ulink> - is a service, based on a software such as &my-app;, that clients - (i.e. browsers) can use instead of connecting to web servers directly. - The clients then ask the proxy to request objects (web pages, images, movies etc) - on their behalf and to forward the data to the clients. - It is a <quote>go-between</quote>. For details, see - <ulink url="http://en.wikipedia.org/wiki/Proxy_server">Wikipedia's proxy definition</ulink>. - </para> - <para> - There are many reasons to use web proxies, such as security (firewalling), - efficiency (caching) and others, and there are any number of proxies - to accommodate those needs. - </para> - <para> - &my-app; is a proxy that is primarily focused on - privacy enhancement, ad and junk elimination and freeing the user from - restrictions placed on his activities. Sitting between your browser(s) and the Internet, - it is in a perfect position to filter outbound personal information that your - browser is leaking, as well as inbound junk. It uses a variety of techniques to do - this, all of which are under your complete control via the various configuration - files and options. Being a proxy also makes it easier to share - configurations among multiple browsers and/or users. - </para> -</sect2> - -<sect2 renderas="sect3" id="otherstuff"> -<title>Does Privoxy do anything more than ad blocking?</title> - <para> - Yes, ad blocking is but one possible use. There are many, many ways &my-app; - can be used to sanitize and customize web browsing. -</para> -</sect2> - -<sect2 renderas="sect3" id="newjb"><title>What is this new version of -<quote><citetitle>Junkbuster</citetitle></quote>?</title> - - - &history; - - -</sect2> - - -<sect2 renderas="sect3"> -<title id="whyprivoxy">Why <quote>Privoxy</quote>? Why change the name from -Junkbuster at all?</title> -<para> - Though outdated, <ulink url="http://junkbusters.com/">Junkbusters Corporation</ulink> - continues to offer their original version of the <application>Internet - Junkbuster</application>, so publishing our - <application> Junkbuster</application>-derived software under the same name - led to confusion. -</para> -<para> - There are also potential legal complications from our use of the - <application>Junkbuster</application> name, which is a registered trademark of - <ulink url="http://junkbusters.com/">Junkbusters Corporation</ulink>. - There are, however, no objections from Junkbusters Corporation to the - <application>Privoxy</application> project itself, and they, in fact, still - share our ideals and goals. -</para> -<para> - The developers also believed that there are so many improvements over the original - code, that it was time to make a clean break from the past and make - a name in their own right. -</para> -<para> - <application>Privoxy</application> is the - <quote><emphasis>Privacy Enhancing Proxy</emphasis></quote>. Also, its content - modification and junk suppression gives <emphasis>you</emphasis>, the user, more - control, more freedom, and allows you to browse your personal and - <quote><emphasis>private</emphasis> edition</quote> of the web. -</para> -</sect2> - -<sect2 renderas="sect3" id="differs"><title>How does Privoxy differ -from the old Junkbuster?</title> -<para> - <application>Privoxy</application> picks up where - <application>Junkbuster</application> left off. - The new <application>Privoxy</application> still blocks ads and banners, - still manages <ulink - url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink>, and still - helps protect your privacy. But, most of these features have been enhanced, - and many new ones have been added, all in the same vein. - </para> -<para> - <application>Privoxy</application>'s new features include: -</para> - - - &newfeatures; - - -</sect2> - -<sect2 renderas="sect3" id="whatsanad"> -<title id="knows">How does Privoxy know what is -an ad, and what is not?</title> -<para> - <application>Privoxy</application>'s approach to blocking ads is twofold: -</para> -<para> - First, there are certain patterns in the <emphasis>locations</emphasis> (URLs) - of banner images. This applies to both the path (you wouldn't guess how many - web sites serve their banners from a directory called <quote>banners</quote>!) - and the host (blocking the big banner hosting services like doublecklick.net - already helps a lot). <application>Privoxy</application> takes advantage of this - fact by using <ulink url="../user-manual/actions-file.html#AF-PATTERNS">URL - patterns</ulink> to sort out and block the requests for things that sound - like they would be ads or banners. -</para> -<para> - Second, banners tend to come in certain <emphasis>sizes</emphasis>. But you - can't tell the size of an image by its URL without downloading it, and if you - do, it's too late to save bandwidth. Therefore, <application>Privoxy</application> - also inspects the HTML sources of web pages while they are loaded, and replaces - references to images with standard banner sizes by dummy references, so that - your browser doesn't request them anymore in the first place. -</para> -<para> - Both of this involves a certain amount of guesswork and is, of course, freely - and readily configurable. -</para> -</sect2> - -<sect2 renderas="sect3"> -<title id="mistakes">Can Privoxy make mistakes? -This does not sound very scientific.</title> -<para> - Actually, it's a black art ;-) And yes, it is always possible to have a broad - rule accidentally block or change something by mistake. You will almost surely - run into such situations at some point. It is tricky writing rules to - cover every conceivable possibility, and not occasionally get false positives. -</para> - -<para> - But this should not be a big concern since the - <application>Privoxy</application> configuration is very flexible, and - includes tools to help identify these types of situations so they can be - addressed as needed, allowing you to customize your installation. - (<link linkend="badsite">See the Troubleshooting section below</link>.) -</para> - -</sect2> - -<sect2 renderas="sect3"> -<title id="configornot">Will I have to configure Privoxy - before I can use it?</title> -<para> - That depends on your expectations. - The default installation should give you a good starting - point, and block <emphasis>most</emphasis> ads and unwanted content, - but many of the more advanced features are off by default, and require - you to activate them. -</para> -<para> - You do have to set up your browser to use - <application>Privoxy</application> (see the <link - linkend="firststep">Installation section below</link>). -</para> -<para> - And you will certainly run into situations where there are false positives, - or ads not being blocked that you may not want to see. In these cases, you - would certainly benefit by customizing <application>Privoxy's</application> - configuration to more closely match your individual situation. And we - encourage you to do this. This is where the real power of - <application>Privoxy</application> lies! -</para> - -</sect2> - -<sect2 renderas="sect3" id="lan"> -<title>Can Privoxy run as a server on a network?</title> - <para> - Yes, &my-app; runs as a server already, and can easily be configured to - <quote>serve</quote> more than one client. See <link linkend="lanconfig"> - How can I set up Privoxy to act as a proxy for my LAN</link> below. -</para> -</sect2> - -<sect2 renderas="sect3" id="browsers2"><title>My browser does the same things as -Privoxy. Why should I use Privoxy at all?</title> - <para> - Modern browsers do indeed have <emphasis>some</emphasis> of the same - functionality as <application>Privoxy</application>. Maybe this is - adequate for you. But <application>Privoxy</application> is very - versatile and powerful, and can probably do a number of things - your browser just can't. - </para> - <para> - In addition, a proxy is good choice if you use multiple browsers, or - have a LAN with multiple computers since &my-app; can run as a server - application. This way all the configuration is in one place, and you don't - have to maintain a similar configuration for possibly many browsers or - users. - </para> - <para> - Note, however, that it's recommended to leverage both your browser's - and <application>Privoxy's</application> privacy enhancing features - at the same time. While your browser probably lacks some features - &my-app; offers, it should also be able to do some things more - reliable, for example restricting and suppressing JavaScript. - </para> -</sect2> - -<sect2 renderas="sect3" id="whytrust"><title>Why should I trust Privoxy?</title> - <para> - The most important reason is because you have access to - <emphasis>everything</emphasis>, and you can control everything. You can - check every line of every configuration file yourself. You can check every - last bit of source code should you desire. And even if you can't read code, - there should be some comfort in knowing that other people can, - and do read it. You can build the software from scratch, if you want, - so that you know the executable is clean, and that it is - <emphasis>yours</emphasis>. In fact, we encourage this level of scrutiny. It - is one reason we use &my-app; ourselves. - </para> -</sect2> - -<sect2 renderas="sect3" id="license"><title>Is there is a license or fee? What about a -warranty? Registration?</title> - <para> - <application>Privoxy</application> is free software and licensed under the <ulink - url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html">GNU General Public License (GPL) version 2</ulink>. - It is free to use, copy, modify or distribute as you wish under the terms of this - license. Please see the <link linkend="copyright">Copyright</link> section for more - information on the license and copyright. Or the <filename>LICENSE</filename> file - that should be included. - </para> - <para> - There is <emphasis>no warranty</emphasis> of any kind, expressed, implied or otherwise. - That is something that would cost real money ;-) There is no registration either. - </para> - -</sect2> - -<sect2 renderas="sect3" id="spyware"> -<title>Can Privoxy remove spyware? Adware? Viruses?</title> -<para> - No, at least not reliably enough to trust it. &my-app; is not designed to be - a malware removal tool and the default configuration doesn't even try to - filter out any malware. -</para> -<para> - &my-app; could help prevent contact from (known) sites that use such - tactics with appropriate configuration rules, and thus could conceivably - prevent contamination from such sites. However, keeping such a configuration - up to date would require a lot of time and effort that would be better spend - on keeping your software itself up to date so it doesn't have known - vulnerabilities. -</para> -</sect2> - - -<sect2 renderas="sect3" id="otherads"> -<title>Can I use Privoxy with other ad-blocking software?</title> -<para> - &my-app; should work fine with other proxies and other software in general. -</para> -<para> - But it is probably not necessary to use &my-app; in conjunction with other - ad-blocking products, and this could conceivably cause undesirable results. - It might be better to choose one software or the other and work a little to - tweak its configuration to your liking. -</para> -<para> - Note that this is an advice specific to ad blocking. -</para> -</sect2> - -<sect2 renderas="sect3" id="jointeam"><title>I would like to help you, what can I do?</title> - -<sect3 renderas="sect4" id="jointeam-work"><title>Would you like to participate?</title> -<para> - Well, we <emphasis>always</emphasis> need help. There is something for - everybody who wants to help us. We welcome new developers, packagers, - testers, documentation writers or really anyone with a desire to help in - any way. You <emphasis>DO NOT</emphasis> need to be a - <quote>programmer</quote>. There are many other tasks available. In fact, - the programmers often can't spend as much time programming because of some - of the other, more mundane things that need to be done, like checking the - Tracker feedback sections. - </para> - <para> - So first thing, <ulink - url="https://sourceforge.net/account/register.php">get an account on SourceForge.net</ulink> - and mail your id to the <ulink url="mailto:ijbswa-developers@lists.sourceforge.net">developers - mailing list</ulink>. Then, please read the <ulink - url="../developer-manual/index.html">Developer's Manual</ulink>, at least - the pertinent sections. -</para> - <para> - You can also start helping out without SourceForge.net account, - simply by showing up on the mailing list, helping out other users, - providing general feedback or reporting problems you noticed. - </para> -</sect3> - -<sect3 renderas="sect4" id="donate"><title>Would you like to donate?</title> -<para> - <application>Privoxy</application> is developed by unpaid volunteers - and thus our current running costs are pretty low. Nevertheless, we - have plans that will cost money in the future. We would like to get - this money through donations made by our users. -</para> - -<para> - <application>Privoxy</application> has therefore become an associated - project of <ulink url="http://www.spi-inc.org/about-spi/about-spi">Software - in the Public Interest (SPI)</ulink>, which allows us to receive tax-deductible - donations in most western countries. -</para> - -<para> - We intend to use the donations to pay for our domain after transfering - it to SPI. Our goal is to make sure there's no single point of failure - and the bill gets paid and the site keeps running even if a some of - the currently active developers were to suddenly disappear for a while. -</para> - -<para> - We would also like to spend some money on more reliable hosting, - on hardware to help make sure <application>Privoxy</application> - keeps running on platforms the developers currently can't test on, - and on technical books to educate our developers about said platforms - or to improve their knowledge in general. -</para> - -<para> - If you enjoy our software and feel like helping out with a donation, - please have a look at - <ulink url="http://www.spi-inc.org/donations">SPI's donation page</ulink> - to see what the options are. -<para> -</sect3> - -</sect2> - -</sect1> - - - - -<sect1 id="installation"><title>Installation</title> - -<sect2 renderas="sect3" id="whichbrowsers"> -<title>Which browsers are supported by Privoxy?</title> -<para> - Any browser that can be configured to use a proxy, which - should be virtually all browsers, including - <application>Firefox</application>, <application>Internet - Explorer</application>, <application>Opera</application>, and - <application>Safari</application> among others. - Direct browser support is not an absolute requirement since - <application>Privoxy</application> runs as a separate application and talks - to the browser in the standardized HTTP protocol, just like a web server - does. -</para> -</sect2> - -<sect2 renderas="sect3" id="whichos"> -<title>Which operating systems are supported?</title> - -&supported; -</sect2> - -<sect2 renderas="sect3" id="email-client"> -<title>Can I use Privoxy with my email client?</title> -<para> - As long as there is some way to set a HTTP proxy for the client, then yes, - any application can be used, whether it is strictly speaking a - <quote>browser</quote> or not. Though this may not be the best approach for - dealing with some of the common abuses of HTML in email. See <link - linkend="outlook">How can I configure <application>Privoxy</application> - with <application>Outlook</application>?</link> below for more on - this. -</para> -<para> - Be aware that HTML email presents a number of unique security and privacy - related issues, that can require advanced skills to overcome. The developers - recommend using email clients that can be configured to convert HTML to plain - text for these reasons. -</para> -</sect2> - - - -<sect2 renderas="sect3" id="firststep"> -<title>I just installed Privoxy. Is there anything -special I have to do now?</title> - -<para> - All browsers should be told to use <application>Privoxy</application> - as a proxy by specifying the correct proxy address and port number - in the appropriate configuration area for the browser. It's possible - to combine &my-app; with a packet filter to intercept HTTP requests - even if the client isn't explicitly configured to use &my-app;, - but where possible, configuring the client is recommended. See - <ulink url="../user-manual/startup.html">the User Manual for more - details</ulink>. You should also flush your browser's memory and disk - cache to get rid of any cached junk items, and remove any stored - <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink>. - -</para> - -</sect2> - -<sect2 renderas="sect3" id="localhost"><title>What is the proxy address of Privoxy?</title> - <para> - If you set up the <application>Privoxy</application> to run on - the computer you browse from (rather than your ISP's server or some - networked computer on a LAN), the proxy will be on <literal>127.0.0.1</literal> - (sometimes referred to as <quote>localhost</quote>, - which is the special name used by every computer on the Internet to refer - to itself) and the port will be 8118 (unless you used the <ulink - url="../user-manual/config.html#LISTEN-ADDRESS">listen-address</ulink> - config option to tell <application>Privoxy</application> to run on - a different port). - </para> - <para> - When configuring your browser's proxy settings you typically enter - the word <quote>localhost</quote> or the IP address <quote>127.0.0.1</quote> - in the boxes next to <quote>HTTP</quote> and <quote>Secure</quote> (HTTPS) and - then the number <quote>8118</quote> for <quote>port</quote>. - This tells your browser to send all web requests to <application>Privoxy</application> - instead of directly to the Internet. - </para> - <para> - <application>Privoxy</application> can also be used to proxy for - a Local Area Network. In this case, your would enter either the IP - address of the LAN host where <application>Privoxy</application> - is running, or the equivalent hostname, e.g. <literal>192.168.1.1</literal>. - Port assignment would be same as above. Note that - <application>Privoxy</application> doesn't listen on any LAN interfaces by - default. - </para> - <para> - <application>Privoxy</application> does not currently handle - any other protocols such as FTP, SMTP, IM, IRC, ICQ, etc. - </para> -</sect2> - -<sect2 renderas="sect3" id="nothing"> -<title>I just installed Privoxy, and nothing is happening. -All the ads are there. What's wrong?</title> - -<para> - Did you configure your browser to use <application>Privoxy</application> - as a proxy? It does not sound like it. See above. You might also try flushing - the browser's caches to force a full re-reading of pages. You can verify - that <application>Privoxy</application> is running, and your browser - is correctly configured by entering the special URL: - <ulink url="http://p.p/">http://p.p/</ulink>. -  - This should take you to a page titled <quote>This is Privoxy..</quote> with - access to <application>Privoxy's</application> internal configuration. - If you see this, then you are good to go. If you receive a page saying - <quote>Privoxy is not running</quote>, then the browser is not set up to use - your <application>Privoxy</application> installation. - If you receive anything else (probably nothing at all), it could either - be that the browser is not set up correctly, or that - <application>Privoxy</application> is not running at all. Check the <ulink - url="../user-manual/config.html#LOGFILE">log file</ulink>. For instructions - on starting <application>Privoxy</application> and browser configuration, - see the <ulink url="http://www.privoxy.org/user-manual/startup.html">chapter - on starting <application>Privoxy</application></ulink> in the - <ulink url="http://www.privoxy.org/user-manual/">User Manual</ulink>. -</para> - -</sect2> - -<sect2 renderas="sect3" id="notused"> -<title>I get a <quote>Privoxy is not being used</quote> dummy page although -Privoxy is running and being used.</title> - -<para> - First, make sure that Privoxy is <emphasis>really</emphasis> running and - being used by visiting <ulink url="http://p.p/">http://p.p/</ulink>. You - should see the <application>Privoxy</application> main page. If not, see - the <ulink url="http://www.privoxy.org/user-manual/startup.html">chapter - on starting <application>Privoxy</application></ulink> in the - <ulink url="http://www.privoxy.org/user-manual/">User Manual</ulink>. -</para> - -<para> - Now if <ulink url="http://p.p/">http://p.p/</ulink> works for you, but - other parts of <application>Privoxy</application>'s web interface show - the dummy page, your browser has cached a redirection it encountered before - <application>Privoxy</application> was being used. You need to clear your - browser's cache. Note that shift-reloading the dummy page won't help, since - that'll only refresh the dummy page, not the redirection that lead you there. -</para> - -<para> - The procedure for clearing the cache varies from browser to browser. For - example, <application>Mozilla/Netscape</application> users would click - <guibutton>Edit</guibutton> --> <guibutton>Preferences</guibutton> --> - <guibutton>Advanced</guibutton> --> <guibutton>Cache</guibutton> and - then click both <quote><guibutton>Clear Memory Cache</guibutton></quote> - and <quote><guibutton>Clear Disk Cache</guibutton></quote>. - In some <application>Firefox</application> versions it's - <guibutton>Tools</guibutton> --> <guibutton>Options</guibutton> --> - <guibutton>Privacy</guibutton> --> <guibutton>Cache</guibutton> and - then click <quote><guibutton>Clear Cache Now</guibutton></quote>. -  -</para> -</sect2> - -</sect1> - - - - -<sect1 id="configuration"><title>Configuration</title> -<sect2 renderas="sect3"> -<title id="actionsfile">What exactly is an <quote>actions</quote> file?</title> - -<para> - &my-app; utilizes the concept of <quote> - <ulink url="../user-manual/actions-file.html#ACTIONS">actions</ulink></quote> - that are used to manipulate and control web page data. - <ulink url="../user-manual/actions-file.html">Actions files</ulink> - are where these <ulink url="../user-manual/actions-file.html#ACTIONS">actions</ulink> - that <application>Privoxy</application> could take while processing a certain - request, are configured. Typically, you would define a set of default actions - that apply globally to all URLs, then add exceptions to these defaults where needed. - There is a wide array of actions available that give the user a high degree - of control and flexibility on how to process each and every web page. -</para> - -<para> - Actions can be defined on a <ulink - url="../user-manual/actions-file.html#AF-PATTERNS">URL pattern</ulink> basis, i.e. - for single URLs, whole web sites, groups or parts thereof etc. Actions can also be - grouped together and then applied to requests matching one or more patterns. - There are many possible actions that might apply to any given site. As an example, - if you are blocking <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink> - as one of your default actions, but need to accept cookies from a given site, - you would need to define an exception for this site in one of your actions - files, preferably in <filename>user.action</filename>. -</para> - -</sect2> - -<sect2 renderas="sect3" id="actionss"> -<title>The <quote>actions</quote> concept confuses me. Please list -some of these <quote>actions</quote>.</title> -<para> - For a comprehensive discussion of the actions concept, please refer - to the <ulink url="../user-manual/actions-file.html">actions file - chapter</ulink> in the <ulink url="../user-manual/index.html">User - Manual</ulink>. It includes a <ulink - url="../user-manual/actions-file.html#ACTIONS">list of all actions</ulink> - and an <ulink url="../user-manual/actions-file.html#ACT-EXAMPLES">actions - file tutorial</ulink> to get you started. -</para> -</sect2> - - -<sect2 renderas="sect3"> -<title id="actconfig">How are actions files configured? What is the easiest -way to do this?</title> - -<para> - Actions files are just text files in a special syntax and can be edited - with a text editor. But probably the easiest way is to access - <application>Privoxy</application>'s user interface with your web browser - at <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink> - (Shortcut: <ulink url="http://p.p/">http://p.p/</ulink>) and then select - <quote><ulink url="http://config.privoxy.org/show-status">View & - change the current configuration</ulink></quote> from the menu. Note - that this feature must be explicitly enabled in the main config file - (see <ulink - url="../user-manual/config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions</ulink>). -</para> -</sect2> - - -<sect2 renderas="sect3"> -<title>There are several different <quote>actions</quote> files. What are -the differences?</title> -<para> - Three actions files - are being included by the developers, to be used for - different purposes: These are - <filename>default.action</filename>, the <quote>main</quote> actions file - which is actively maintained by the <application>Privoxy</application> - developers and typically sets the default policies, <filename>user.action</filename>, - where users are encouraged to make their private customizations. - Please see <ulink url="../user-manual/actions-file.html">the actions chapter</ulink> - in the <ulink url="../user-manual/index.html">User Manual</ulink> for a more - detailed explanation. -</para> - -<para> - Earlier versions included three different versions of the - <filename>default.action</filename> file. The new scheme allows for - greater flexibility of local configuration, and for browser based - selection of pre-defined <quote>aggressiveness</quote> levels. -</para> - -</sect2> - -<sect2 renderas="sect3" id="getupdates"><title>Where can I get updated Actions Files?</title> - <para> - Based on your feedback and the continuing development, updates of - <filename>default.action</filename> will be - made available from time to time on the <ulink - url="http://sourceforge.net/project/showfiles.php?group_id=11118">files section</ulink> of - our <ulink url="http://sf.net/projects/ijbswa/">project page</ulink>. - </para> - - <para> - If you wish to receive an email notification whenever we release updates of - <application>Privoxy</application> or the actions file, <ulink - url="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/">subscribe - to our announce mailing list</ulink>, ijbswa-announce(a)lists.sourceforge.net. - </para> - -</sect2> - -<sect2 renderas="sect3" id="newconfig"><title>Can I use my old config files?</title> - <para> - The syntax and purpose of configuration files has remained roughly the - same throughout the 3.x series, but backwards compatibility is not guaranteed. - Also each release contains updated, <quote>improved</quote> versions and it is - therefore strongly recommended to install the newer configuration files - and merge back your modifications. - </para> -</sect2> - -<sect2 renderas="sect3" id="difficult"> -<title>Why is the configuration so complicated?</title> - <para> - <quote>Complicated</quote> is in the eye of the beholder. Those that are - familiar with some of the underlying concepts, such as regular expression - syntax, take to it like a fish takes to water. Also, software that tries - hard to be <quote>user friendly</quote>, often lacks sophistication and - flexibility. There is always that trade-off there between power vs. - easy-of-use. Furthermore, anyone is welcome to contribute ideas and - implementations to enhance &my-app;. - </para> -</sect2> - -<sect2 renderas="sect3" id="yahoo"><title>How can I make my Yahoo/Hotmail/Gmail account work?</title> - <para> - The default configuration shouldn't impact the usability of any of these services. - It may, however, make all <ulink - url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink> - temporary, so that your browser will forget your - login credentials in between browser sessions. If you would like not to have to log - in manually each time you access those websites, simply turn off all cookie handling - for them in the <filename>user.action</filename> file. An example for yahoo might - look like: - </para> - <para> - <screen># Allow all cookies for Yahoo login: -# -{ -<ulink url="../user-manual/actions-file.html#CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</ulink> -<ulink url="../user-manual/actions-file.html#CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</ulink> -<ulink url="../user-manual/actions-file.html#SESSION-COOKIES-ONLY">session-cookies-only</ulink> } -.login.yahoo.com</screen> - </para> - <para> - These kinds of sites are often quite complex and heavy with - <ulink url="http://en.wikipedia.org/wiki/Javascript">Javascript</ulink> and - thus <quote>fragile</quote>. So if <emphasis>still</emphasis> a problem, - we have an <ulink - url="../user-manual/actions-file.html#ALIASES">alias</ulink> just for such - sticky situations: - </para> - <para> - <screen># Gmail is a _fragile_ site: -# -{ <literal>fragile</literal> } - # Gmail is ... - mail.google.com</screen> - </para> - <para> - Be sure to flush your browser's caches whenever making these kinds of - changes, just to make sure the changes <quote>take</quote>. - </para> - <para> - Make sure the domain, host and path are appropriate as well. Your browser can - tell you where you are specifically and you should use that information for - your configuration settings. Note that above it is not referenced as - <literal>gmail.com</literal>, which is a valid domain name. - </para> - -</sect2> - -<sect2 renderas="sect3" id="configfiles"> <title>What's the difference between the -<quote>Cautious</quote>, <quote>Medium</quote> and <quote>Advanced</quote> defaults?</title> - <para> - Configuring <application>Privoxy</application> is not entirely trivial. To - help you get started, we provide you with three different default action - <quote>profiles</quote> in the web based actions file editor at <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>. - See the <ulink url="../user-manual/actions-file.html"><citetitle>User - Manual</citetitle></ulink> for a list of actions, and how the default - profiles are set. - </para> - -<para> - Where the defaults are likely to break some sites, exceptions for - known popular <quote>problem</quote> sites are included, but in - general, the more aggressive your default settings are, the more exceptions - you will have to make later. New users are best to start off in - <quote>Cautious</quote> setting. This is safest and will have the fewest - problems. See the <ulink - url="../user-manual/index.html"><citetitle>User Manual</citetitle></ulink> - for a more detailed discussion. -</para> - -<para> - It should be noted that the <quote>Advanced</quote> profile (formerly known - as the <quote>Adventuresome</quote> profile) is more - aggressive, and will make use of some of - <application>Privoxy's</application> advanced features. Use at your own risk! -</para> - -</sect2> - -<sect2 renderas="sect3" id="browseconfig"> <title>Why can I change the configuration -with a browser? Does that not raise security issues?</title> - <para> - It may seem strange that regular users can edit the config files with their - browsers, although the whole <filename>/etc/privoxy</filename> hierarchy - belongs to the user <quote>privoxy</quote>, with only 644 permissions. - </para> - <para> - When you use the browser-based editor, <application>Privoxy</application> - itself is writing to the config files. Because - <application>Privoxy</application> is running as the user <quote>privoxy</quote>, - it can update its own config files. - </para> - <para> - If you run <application>Privoxy</application> for multiple untrusted users (e.g. in - a LAN) or aren't entirely in control of your own browser, you will probably want - to make sure that the the web-based editor and remote toggle features are - <quote>off</quote> by setting <quote><literal><ulink - url="../user-manual/config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions</ulink> - 0</literal></quote> and <quote><literal><ulink - url="../user-manual/config.html#ENABLE-REMOTE-TOGGLE">enable-remote-toggle</ulink> - 0</literal></quote> in the <ulink url="../user-manual/config.html">main configuration file</ulink>. - </para> - <para> - As of &my-app; 3.0.7 these options are disabled by default. - </para> -</sect2> - - -<sect2 renderas="sect3"> -<title id="filterfile">What is the <filename>default.filter</filename> file? What is a <quote>filter</quote>?</title> -<para> - The <ulink url="../user-manual/filter-file.html"><filename>default.filter</filename></ulink> - file is where <emphasis>filters</emphasis> as supplied by the developers are defined. - Filters are a special subset of actions that can be used to modify or - remove web page content or headers on the fly. Content filters can - be applied to <emphasis>anything</emphasis> in the page source, - header filters can be applied to either server or client headers. - Regular expressions are used to accomplish this. -</para> -<para> - There are a number of pre-defined filters to deal with common annoyances. The - filters are only defined here, to invoke them, you need to use the - <ulink - url="../user-manual/actions-file.html#FILTER"><literal>filter</literal> - action</ulink> in one of the actions files. Content filtering is automatically - disabled for inappropriate MIME types, but if you now better than Privoxy - what should or should not be filtered you can filter any content you like. -</para> -<para> - Filters should - <emphasis>not</emphasis> be confused with <ulink - url="../user-manual/actions-file.html#BLOCK"><literal>blocks</literal></ulink>, which - is a completely different action, and is more typically used to block ads and - unwanted sites. -</para> - -<para> - If you are familiar with regular expressions, and HTML, you can look at - the provided <filename>default.filter</filename> with a text editor and define - your own filters. This is potentially a very powerful feature, but - requires some expertise in both regular expressions and HTML/HTTP. - <![%p-newstuff;[ You should - place any modifications to the default filters, or any new ones you create - in a separate file, such as <filename>user.filter</filename>, so they won't - be overwritten during upgrades. - The ability to define multiple filter files - in <filename>config</filename> is a new feature as of v. 3.0.5.]]> -</para> - -<para> - There is no GUI editor option for this part of the configuration, - but you can disable/enable the various pre-defined filters of the included - <filename>default.filter</filename> file with the <ulink - url="http://config.privoxy.org/show-status">web-based actions file editor</ulink>. - Note that the custom actions editor must be explicitly enabled in - the main config file (see <ulink - url="../user-manual/config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions</ulink>). -</para> - -<para> - If you intend to develop your own filters, you might want to have a look at - <ulink - url="http://www.fabiankeil.de/sourcecode/pft/">Privoxy-Filter-Test</ulink>. -</para> - -</sect2> - -<sect2 renderas="sect3" id="lanconfig"> -<title>How can I set up Privoxy to act as a proxy for my - LAN?</title> -<para> - By default, <application>Privoxy</application> only responds to requests - from <literal>127.0.0.1</literal> (localhost). To have it act as a server for - a network, this needs to be changed in the <ulink - url="../user-manual/config.html">main configuration file</ulink>. Look for - the <literal><ulink - url="../user-manual/config.html#LISTEN-ADDRESS">listen-address</ulink></literal> - option, which may be commented out with a <quote>#</quote> symbol. Make sure - it is uncommented, and assign it the address of the LAN gateway interface, - and port number to use. Assuming your LAN address is 192.168.1.1 and you - wish to run <application>Privoxy</application> on port 8118, this line - should look like: -</para> - -<para> - <screen> - listen-address 192.168.1.1:8118</screen> -</para> - -<para> - Save the file, and restart <application>Privoxy</application>. Configure - all browsers on the network then to use this address and port number. -</para> - -<para> - Alternately, you can have <application>Privoxy</application> listen on - all available interfaces: -</para> - -<para> - <screen> - listen-address :8118</screen> -</para> - -<para> - And then use <application>Privoxy's</application> - <ulink - url="../user-manual/config.html#PERMIT-ACCESS">permit-access</ulink> - feature to limit connections. A firewall in this situation is recommended - as well. -</para> - -<para> - The above steps should be the same for any TCP network, regardless of - operating system. -</para> - -<para> - If you run <application>Privoxy</application> on a LAN with untrusted users, - we recommend that you double-check the <ulink - url="../user-manual/config.html#ACCESS-CONTROL">access control and security</ulink> - options! -</para> - -</sect2> - - -<sect2 renderas="sect3"> -<title id="noseeum">Instead of ads, now I get a checkerboard pattern. I don't want to see anything.</title> -<para> - The replacement for blocked images can be controlled with the <ulink - url="../user-manual/actions-file.html#SET-IMAGE-BLOCKER"><literal>set-image-blocker</literal> - action</ulink>. You have the choice of a checkerboard pattern, a transparent 1x1 GIF - image (aka <quote>blank</quote>), or a redirect to a custom image of your choice. - Note that this choice only has effect for images which are blocked as images, i.e. - whose URLs match both a <literal><ulink - url="../user-manual/actions-file.html#HANDLE-AS-IMAGE">handle-as-image</ulink></literal> - <emphasis>and</emphasis> <literal><ulink - url="../user-manual/actions-file.html#BLOCK">block</ulink></literal> action. -</para> -<para> - If you want to see nothing, then change the <ulink - url="../user-manual/actions-file.html#SET-IMAGE-BLOCKER"><literal>set-image-blocker</literal> - action</ulink> to <quote>blank</quote>. This can be done by editing the - <filename>user.action</filename> file, or through the <ulink - url="http://config.privoxy.org/show-status">web-based actions file editor</ulink>. -</para> - -</sect2> - -<sect2 renderas="sect3"> -<title id="whyseeum">Why would anybody want to see a checkerboard pattern?</title> -<para> - Remember that <link linkend="whatsanad">telling which image is an ad and which - isn't</link>, is an educated guess. While we hope that the standard configuration - is rather smart, it will make occasional mistakes. The checkerboard image is visually - decent, and it shows you where images have been blocked, which can be very - helpful in case some navigation aid or otherwise innocent image was - erroneously blocked. It is recommended for new users so they can - <quote>see</quote> what is happening. Some people might also enjoy seeing how - many banners they <emphasis>don't</emphasis> have to see. -</para> - -</sect2> - -<sect2 renderas="sect3"> -<title id="blockedbytext">I see some images being replaced with text -instead of the checkerboard image. Why and how do I get rid of this?</title> -<para> - This happens when the banners are not embedded in the HTML code of the - page itself, but in separate HTML (sub)documents that are loaded into (i)frames - or (i)layers, and these external HTML documents are blocked. Being non-images - they get replaced by a substitute HTML page rather than a substitute image, - which wouldn't work out technically, since the browser expects and accepts - only HTML when it has requested an HTML document. -</para> -<para> - The substitute page adapts to the available space and shows itself as a - miniature two-liner if loaded into small frames, or full-blown with a - large red "BLOCKED" banner if space allows. -</para> -<para> - If you prefer the banners to be blocked by images, you must see to it that - the HTML documents in which they are embedded are not blocked. Clicking - the <quote>See why</quote> link offered in the substitute page will show - you which rule blocked the page. After changing the rule and un-blocking - the HTML documents, the browser will try to load the actual banner images - and the usual image blocking will (hopefully!) kick in. -</para> -</sect2> - - -<sect2 renderas="sect3" id="srvany"> -<title>Can Privoxy run as a service -on Win2K/NT/XP?</title> -<para> -<![%p-newstuff;[ - Yes. Version 3.0.5 introduces full <application>Windows</application> service - functionality. See <ulink url="../user-manual/installation.html#installation-pack-win"> - the <citetitle>User Manual</citetitle></ulink> for details on how to install and configure - <application>Privoxy</application> as a service. -</para> -<para> - Earlier ]]>3.x versions could run as a system service using <command>srvany.exe</command>. - See the discussion at <ulink - url="http://sourceforge.net/tracker/?func=detail&atid=361118&aid=485617&…">http://sourceforge.net/tracker/?func=detail&atid=361118&aid=485617&…</ulink>, - for details, and a sample configuration. -</para> -</sect2> - - -<sect2 renderas="sect3" id="otherproxy"> -<title>How can I make Privoxy work with other -proxies like Squid or Tor?</title> -<para> - This can be done and is often useful to combine the benefits of - <application>Privoxy</application> with those of a another proxy. - See the <ulink - url="../user-manual/config.html#FORWARDING">forwarding chapter</ulink> - in the <ulink url="../user-manual/index.html">User Manual</ulink> which - describes how to do this, and the <link linkend="TOR"> - How do I use Privoxy together with - Tor</link> section below. -</para> -</sect2> - -<sect2 renderas="sect3" id="port-80"> -<title>Can I just set Privoxy to use port 80 -and thus avoid individual browser configuration?</title> - -<para> - No, its more complicated than that. This only works with special kinds - of proxies known as <quote>intercepting</quote> proxies (see below). -</para> - -</sect2> - -<sect2 renderas="sect3" id="transparent"> -<title>Can Privoxy run as a <quote>transparent -</quote> proxy?</title> -<para> - The whole idea of Privoxy is to modify client requests - and server responses in all sorts of ways and therefore - it's not a transparent proxy as described in - <ulink url="http://tools.ietf.org/html/rfc2616">RFC 2616</ulink>. -</para> -<para> - However, some people say <quote>transparent proxy</quote> when they - mean <quote>intercepting proxy</quote>. If you are one of them, - please read the <ulink url="#intercepting">next entry</ulink>. -</para> - -</sect2> - -<sect2 renderas="sect3" id="intercepting"> -<title>Can Privoxy run as a <quote>intercepting</quote> proxy?</title> -<para> - <application>Privoxy</application> can't intercept traffic itself, - but it can handle requests that where intercepted and redirected - with a packet filter (like <application>PF</application> or - <application>iptables</application>), as long as the <literal>Host</literal> - header is present. - </para> -<para> - As the <literal>Host</literal> header is required by HTTP/1.1 and as most - web sites rely on it anyway, this limitation shouldn't be a problem. -</para> -<para> - Please refer to your packet filter's documentation to learn how to - intercept and redirect traffic into <application>Privoxy</application>. - Afterward you just have to configure <application>Privoxy</application> to - <ulink url="../user-manual/config.html#ACCEPT-INTERCEPTED-REQUESTS">accept - intercepted requests</ulink>. -</para> - -</sect2> - -<sect2 renderas="sect3" id="outlook"> -<title>How can I configure Privoxy for use with Outlook?</title> -<para> - Versions of <application>Outlook</application> prior to Office 2007, use - <application>Internet Explorer</application> components to both render HTML, - and fetch any HTTP requests that may be embedded in an HTML email. So however - you have <application>Privoxy</application> configured to work with IE, this - configuration should automatically be shared, at least with older version of - Internet Explorer. -</para> -<para> - Starting with Office 2007, Microsoft is instead using the MS-Word rendering - engine with Outlook. It is unknown whether this can be configured to use a - proxy. -  -</para> -</sect2> - -<sect2 renderas="sect3" id="outlook-more"> -<title>How can I have separate rules just for HTML mail?</title> -<para> - The short answer is, you can't. <application>Privoxy</application> has no way - of knowing which particular application makes a request, so there is no way to - distinguish between web pages and HTML mail. - <application>Privoxy</application> just blindly proxies all requests. In the - case of <application>Outlook Express</application> (see above), OE uses - IE anyway, and there is no way for <application>Privoxy</application> to ever - be able to distinguish between them (nor could any other proxy type application for - that matter). -</para> -<para> - For a good discussion of some of the issues involved (including privacy and - security issues), see - <ulink url="http://sourceforge.net/tracker/?func=detail&atid=211118&aid=629518&…">http://sourceforge.net/tracker/?func=detail&atid=211118&aid=629518&…</ulink>. -</para> -</sect2> - -<sect2 renderas="sect3" id="sneaky-cookies"> -<title>I sometimes notice cookies sneaking through. How?</title> -<para> - <ulink - url="http://en.wikipedia.org/wiki/Browser_cookie">Cookies</ulink> can be - set in several ways. The classic method is via the - <literal>Set-Cookie</literal> HTTP header. This is straightforward, and an - easy one to manipulate, such as the &my-app; concept of - <ulink url="../user-manual/actions-file.html#SESSION-COOKIES-ONLY">session-cookies-only</ulink>. - There is also the possibility of using - <ulink url="http://en.wikipedia.org/wiki/Javascript">Javascript</ulink> to - set cookies (&my-app; calls these <literal>content-cookies</literal>). This - is trickier because the syntax can vary widely, and thus requires a certain - amount of guesswork. It is not realistic to catch all of these short of - disabling Javascript, which would break many sites. And lastly, if the - cookies are embedded in a HTTPS/SSL secure session via Javascript, they are beyond - <application>Privoxy's</application> reach. -</para> -<para> - All in all, &my-app; can help manage cookies in general, can help minimize - the loss of privacy posed by cookies, but can't realistically stop all - cookies. -</para> -</sect2> - -<sect2 renderas="sect3" id="evil-cookies"> -<title>Are all cookies bad? Why?</title> -<para> - No, in fact there are many beneficial uses of - <ulink - url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink>. Cookies are just a - method that browsers can use to store data between pages, or between browser - sessions. Sometimes there is a good reason for this, and the user's life is a - bit easier as a result. But there is a long history of some websites taking - advantage of this layer of trust, and using the data they glean from you and - your browsing habits for their own purposes, and maybe to your potential - detriment. Such sites are using you and storing their data on your system. - That is why the privacy conscious watch from whom those cookies come, and why - they really <emphasis>need</emphasis> to be there. -</para> -<para> - See the - <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">Wikipedia cookie - definition</ulink> for more. -</para> -</sect2> - -<sect2 renderas="sect3" id="allow-cookies"> -<title>How can I allow permanent cookies for my trusted sites?</title> - -<para> - There are several actions that relate to cookies. The default behavior is to - allow only <quote>session cookies</quote>, which means the cookies only last - for the current browser session. This eliminates most kinds of abuse related - to cookies. But there may be cases where you want cookies to last. -</para> -<para> - To disable all cookie actions, so that cookies are allowed unrestricted, - both in and out, for <literal>example.com</literal>: -</para> -<para> - <screen> - { -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only -filter{content-cookies} } - .example.com</screen> -</para> -<para> - Place the above in <filename>user.action</filename>. Note that some of these may - be off by default anyway, so this might be redundant, but there is no harm - being explicit in what you want to happen. <filename>user.action</filename> - includes an alias for this situation, called - <literal>allow-all-cookies</literal>. -</para> -</sect2> - -<sect2 renderas="sect3" id="multiples"> -<title>Can I have separate configurations for different users?</title> -<para> - Each instance of <application>Privoxy</application> has its own - configuration, including such attributes as the TCP port that it listens on. - What you can do is run multiple instances of <application>Privoxy</application>, each with - a unique - <ulink url="../user-manual/config.html#LISTEN-ADDRESS">listen-address</ulink> - configuration setting, and configuration path, and then - each of these can have their own configurations. Think of it as per-port - configuration. -</para> -<para> - Simple enough for a few users, but for large installations, consider having - groups of users that might share like configurations. -</para> -</sect2> - -<sect2 renderas="sect3" id="whitelists"> -<title>Can I set-up Privoxy as a whitelist of -<quote>good</quote> sites?</title> -<para> - Sure. There are a couple of things you can do for simple white-listing. - Here's one real easy one: -</para> - <screen> - ############################################################ - # Blacklist - ############################################################ - { <ulink url="../user-manual/actions-file.html#BLOCK">+block</ulink> } - / # Block *all* URLs - - ############################################################ - # Whitelist - ############################################################ - { <ulink url="../user-manual/actions-file.html#BLOCK">-block</ulink> } - kids.example.com - toys.example.com - games.example.com</screen> -<para> - This allows access to only those three sites by first blocking all URLs, and - then subsequently allowing three specific exceptions. -</para> -<para> - Another approach is <application>Privoxy's</application> - <literal>trustfile</literal> concept, which incorporates the notion of - <quote>trusted referrers</quote>. See the <ulink - url="../user-manual/config.html#TRUSTFILE">Trust documentation</ulink> - for details. -</para> -<para> - These are fairly simple approaches and are not completely foolproof. There - are various other configuration options that should be disabled (described - elsewhere here and in <ulink url="../user-manual/">the User Manual</ulink>) - so that users can't modify their own configuration and easily circumvent the - whitelist. -</para> -</sect2> - -<sect2 renderas="sect3" id="no-adblock"> -<title>How can I turn off ad-blocking?</title> -<para> - Ad blocking is achieved through a complex application of various &my-app; - <ulink url="../user-manual/actions-file.html">actions</ulink>. These - actions are deployed against simple images, banners, flash animations, - text pages, JavaScript, pop-ups and pop-unders, etc., so its not as simple as - just turning one or two actions off. The various actions that make up - &my-app; ad blocking are hard-coded into the default configuration files. It - has been assumed that everyone using &my-app; is interested in this - particular feature. - </para> - <para> - If you want to do without this, there are several approaches you can take: - You can manually undo the many block rules in - <filename>default.action</filename>. Or even easier, just create your own - <filename>default.action</filename> file from scratch without the many ad - blocking rules, and corresponding exceptions. Or lastly, if you are not - concerned about the additional blocks that are done for privacy reasons, you - can very easily over-ride <emphasis>all</emphasis> blocking with the - following very simple rule in your <filename>user.action</filename>: - </para> - <para> - <screen> - # Unblock everybody, everywhere - { <ulink url="../user-manual/actions-file.html#BLOCK">-block</ulink> } - / # UN-Block *all* URLs</screen> -</para> -<para> - Or even a more comprehensive reversing of various ad related actions: -</para> -<para> - <screen> - # Unblock everybody, everywhere, and turn off appropriate filtering, etc - { <ulink url="../user-manual/actions-file.html#BLOCK">-block</ulink> \ - <ulink url="../user-manual/actions-file.html#FILTER-BANNERS-BY-SIZE">-filter{banners-by-size}</ulink> \ - <ulink url="../user-manual/actions-file.html#FILTER-BANNERS-BY-LINK">-filter{banners-by-link}</ulink> \ - <literal>allow-popups</literal> \ - } - / # UN-Block *all* URLs and allow ads</screen> -</para> -<para> - This last <quote>action</quote> in this compound statement, - <literal>allow-popups</literal>, is an <ulink - url="../user-manual/actions-file.html#ALIASES">alias</ulink> that disables - various pop-up blocking features. -</para> -</sect2> - -<sect2 renderas="sect3" id="templates"> -<title>How can I have custom template pages, like the -<emphasis>BLOCKED</emphasis> page?</title> -<para> - &my-app; <quote>templates</quote> are specialized text files utilized by - &my-app; for various purposes and can easily be modified using any text - editor. All the template pages are installed in a sub-directory appropriately - named: <filename>templates</filename>. Knowing something about HTML syntax - will of course be helpful. -</para> -<para> - Be forewarned that the default templates are subject to being overwritten - during upgrades. You can, however, create completely new templates, - place them in another directory and specify the alternate path in the main - <filename>config</filename>. For details, have a look at the <ulink - url="../user-manual/config.html#templdir">templdir</ulink> option. -</para> -</sect2> - -<sect2 renderas="sect3" id="blockall"> -<title>How can I remove the <quote>Go There Anyway</quote> link from -the <emphasis>BLOCKED</emphasis> page?</title> -<para> - There is more than one way to do it (although Perl is not involved). -</para> -<para> - Editing the BLOCKED template page (see above) may dissuade some users, but - this method is easily circumvented. Where you need this level of control, you - might want to build &my-app; from source, and disable various features that are - available as compile-time options. You should - <command>configure</command> the sources as follows: -</para> -<para> - <screen> - ./configure --disable-toggle --disable-editor --disable-force</screen> -</para> -<para> - This will create an executable with hard-coded security features so that - &my-app; does not allow easy bypassing of blocked sites, or changing the - current configuration via any connected user's web browser. -</para> -<para> - Finally, all of these features can also be toggled on/off via options in - <application>Privoxy's</application> main <ulink - url="../user-manual/config.html#ACCESS-CONTROL">config</ulink> file which - means you don't have to recompile anything. -</para> -</sect2> - -</sect1> - - - - - - -<sect1 id="misc"><title>Miscellaneous</title> - -<sect2 renderas="sect3"> -<title id="slowsme">How much does Privoxy slow my browsing down? This -has to add extra time to browsing.</title> -<para> - How much of an impact depends on many things, including the CPU of the host - system, how aggressive the configuration is, which specific actions are being triggered, - the size of the page, the bandwidth of the connection, etc. -</para> -<para> - Overall, it should not slow you down any in real terms, and may actually help - speed things up since ads, banners and other junk are not typically being - retrieved and displayed. The actual processing time required by - <application>Privoxy</application> itself for each page, is relatively small - in the overall scheme of things, and happens very quickly. This is typically - more than offset by time saved not downloading and rendering ad images and - other junk content (if ad blocking is being used). -</para> - -<para> - <quote>Filtering</quote> content via the <literal><ulink - url="../user-manual/actions-file.html#FILTER">filter</ulink></literal> or - <literal><ulink - url="../user-manual/actions-file.html#DEANIMATE-GIFS">deanimate-gifs</ulink></literal> - actions may cause a perceived slowdown, since the entire document - needs to be buffered before displaying. And on very large documents, - filtering may have some measurable impact. How much depends on the page size, - the actual definition of the filter(s), etc. See below. Most other actions - have little to no impact on speed. -</para> -<para> - Also, when filtering is enabled but zlib support isn't available, compression - is often disabled (see <ulink - url="../user-manual/actions-file.html#PREVENT-COMPRESSION">prevent-compression</ulink>). - This can have an impact on speed as well, although it's probably smaller than - you might think. Again, the page size, etc. will determine how much of an impact. -</para> - -</sect2> - - -<sect2 renderas="sect3" id="loadingtimes"><title>I notice considerable -delays in page requests. What's wrong?</title> -<para> - If you use any <literal><ulink - url="../user-manual/actions-file.html#FILTER">filter</ulink></literal> action, - such as filtering banners by size, web-bugs etc, or the <literal><ulink - url="../user-manual/actions-file.html#DEANIMATE-GIFS">deanimate-gifs</ulink></literal> - action, the entire document must be loaded into memory in order for the filtering - mechanism to work, and nothing is sent to the browser during this time. -</para> -<para> - The loading time typically does not really change much in real numbers, but - the feeling is different, because most browsers are able to start rendering - incomplete content, giving the user a feeling of "it works". This effect is - more noticeable on slower dialup connections. Extremely large documents - may have some impact on the time to load the page where there is filtering - being done. But overall, the difference should be very minimal. If there is a - big impact, then probably some other situation is contributing (like - anti-virus software). - </para> -<para> - Filtering is automatically disabled for inappropriate MIME types. But note - that if the web server mis-reports the MIME type, then content that should - not be filtered, could be. <application>Privoxy</application> only knows how - to differentiate filterable content because of the MIME type as reported by - the server, or because of some configuration setting that enables/disables - filtering. -</para> -</sect2> - -<sect2 renderas="sect3" id="configurl"><title>What are "http://config.privoxy.org/" and -"http://p.p/"?</title> -<para> - <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink> is the - address of <application>Privoxy</application>'s built-in user interface, and - <ulink url="http://p.p/">http://p.p/</ulink> is a shortcut for it. -</para> -<para> - Since <application>Privoxy</application> sits between your web browser and the Internet, - it can simply intercept requests for these addresses and answer them with its built-in - <quote>web server</quote>. -</para> -<para> - This also makes for a good test for your browser configuration: If entering the - URL <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink> - takes you to a page saying <quote>This is Privoxy ...</quote>, everything is OK. - If you get a page saying <quote>Privoxy is not working</quote> instead, then - your browser didn't use <application>Privoxy</application> for the request, - hence it could not be intercepted, and you have accessed the <emphasis>real</emphasis> - web site at config.privoxy.org. -</para> - -</sect2> - - -<sect2 renderas="sect3" id="newads"><title>How can I submit new ads, or report -problems?</title> -<para> -Please see the <link linkend="contact">Contact section</link> for -various ways to interact with the developers. -</para> - -</sect2> - -<sect2 renderas="sect3" id="newads2"><title>If I do submit missed ads, will -they be included in future updates?</title> -<para> - Whether such submissions are eventually included in the - <filename>default.action</filename> configuration file depends on how - significant the issue is. We of course want to address any potential - problem with major, high-profile sites such as <citetitle>Google</citetitle>, - <citetitle>Yahoo</citetitle>, etc. Any site with global or regional reach, - has a good chance of being a candidate. But at the other end of the spectrum - are any number of smaller, low-profile sites such as for local clubs or - schools. Since their reach and impact are much less, they are best handled by - inclusion in the user's <filename>user.action</filename>, and thus would be - unlikely to be included. -</para> - -</sect2> - - -<sect2 renderas="sect3" id="noonecares"><title>Why doesn't anyone answer my support -request?</title> -<para> -Rest assured that it has been read and considered. Why it is not answered, -could be for various reasons, including no one has a good answer for it, no -one has had time to yet investigate it thoroughly, it has been reported -numerous times already, or because not enough information was provided to help -us help you. Your efforts are not wasted, and we do appreciate them. -</para> - -</sect2> - - -<sect2 renderas="sect3" id="ip"><title>How can I hide my IP address?</title> -<para> - If you run both the browser and &my-app; locally, you cannot hide your IP - address with <application>Privoxy</application> or ultimately any other - software alone. The server needs to know your IP address so that it knows - where to send the responses back. -</para> -<para> - There are many publicly usable "anonymous" proxies out there, which - provide a further level of indirection between you and the web server. -</para> -<para> - However, these proxies are called "anonymous" because you don't need - to authenticate, not because they would offer any real anonymity. - Most of them will log your IP address and make it available to the - authorities in case you violate the law of the country they run in. In fact - you can't even rule out that some of them only exist to *collect* information - on (those suspicious) people with a more than average preference for privacy. -</para> -<para> - If you want to hide your IP address from most adversaries, - you should consider chaining <application>Privoxy</application> - with <ulink url="https://www.torproject.org/">Tor</ulink>. - The configuration details can be found in - <ulink url="#TOR">How do I use <application>Privoxy</application> together - with <application>Tor</application> section</ulink> - just below. -</para> -</sect2> - -<sect2 renderas="sect3"> -<title id="anonforsure">Can Privoxy guarantee I am anonymous?</title> -<para> - No. Your chances of remaining anonymous are improved, but unless you - <ulink url="#TOR">chain <application>Privoxy</application> with <application>Tor</application></ulink> - or a similar proxy and know what you're doing when it comes to configuring - the rest of your system, you should assume that everything you do - on the Web can be traced back to you. -</para> -<para> - <application>Privoxy</application> can remove various information about you, - and allows <emphasis>you</emphasis> more freedom to decide which sites - you can trust, and what details you want to reveal. But it neither - hides your IP address, nor can it guarantee that the rest of the system - behaves correctly. There are several possibilities how a web sites can find - out who you are, even if you are using a strict <application>Privoxy</application> - configuration and chained it with <application>Tor</application>. -</para> -<para> - Most of <application>Privoxy's</application> privacy-enhancing features can be easily subverted - by an insecure browser configuration, therefore you should use a browser that can - be configured to only execute code from trusted sites, and be careful which sites you trust. - For example there is no point in having <application>Privoxy</application> - modify the User-Agent header, if websites can get all the information they want - through JavaScript, ActiveX, Flash, Java etc. -</para> -<para> - A few browsers disclose the user's email address in certain situations, such - as when transferring a file by FTP. <application>Privoxy</application> - does not filter FTP. If you need this feature, or are concerned about the - mail handler of your browser disclosing your email address, you might - consider products such as <application>NSClean</application>. -</para> -<para> - Browsers available only as binaries could use non-standard headers to give - out any information they can have access to: see the manufacturer's license - agreement. It's impossible to anticipate and prevent every breach of privacy - that might occur. The professionally paranoid prefer browsers available as - source code, because anticipating their behavior is easier. Trust the source, - Luke! -</para> - -</sect2> - -<sect2 renderas="sect3"> -<title id="proxytest">A test site says I am not using a Proxy.</title> -<para> - Good! Actually, they are probably testing for some other kinds of proxies. - Hiding yourself completely would require additional steps. -</para> -</sect2> - -<sect2 renderas="sect3" id="tor"><title>How do I use Privoxy - together with Tor?</title> -<para> - Before you configure <application>Privoxy</application> to use - <ulink url="https://www.torproject.org/">Tor</ulink>, - please follow the <citetitle>User Manual</citetitle> chapters - <ulink url="../user-manual/installation.html">2. Installation</ulink> and - <ulink url="../user-manual/startup.html">5. Startup</ulink> to make sure - <application>Privoxy</application> itself is setup correctly. -</para> -<para> - If it is, refer to <ulink url="https://www.torproject.org/documentation.html">Tor's - extensive documentation</ulink> to learn how to install <application>Tor</application>, - and make sure <application>Tor</application>'s logfile says that - <quote>Tor has successfully opened a circuit</quote> and it - <quote>looks like client functionality is working</quote>. -</para> -<para> - If either <application>Tor</application> or <application>Privoxy</application> - isn't working, their combination most likely will neither. Testing them on their - own will also help you to direct problem reports to the right audience. - If <application>Privoxy</application> isn't working, don't bother the - <application>Tor</application> developers. If <application>Tor</application> - isn't working, don't send bug reports to the <application>Privoxy</application> Team. -</para> -<para> - If you verified that <application>Privoxy</application> and <application>Tor</application> - are working, it is time to connect them. As far as <application>Privoxy</application> - is concerned, <application>Tor</application> is just another proxy that can be reached - by socks4 or socks4a. Most likely you are interested in <application>Tor</application> - to increase your anonymity level, therefore you should use socks4a, to make sure DNS requests are - done through <application>Tor</application> and thus invisible to your local network. -</para> - -<![%p-newstuff;[ -<para> - Since <application>Privoxy</application> 3.0.5, its - <ulink url="../user-manual/config.html">main configuration file</ulink> - is already prepared for <application>Tor</application>, if you are using a - default <application>Tor</application> configuration and run it on the same - system as &my-app;, you just have to edit the - <ulink url="../user-manual/config.html#FORWARDING">forwarding section</ulink> - and uncomment the line: -</para> -<para> - <screen> -# forward-socks4a / 127.0.0.1:9050 . - </screen> -</para> -<para> - This is enough to reach the Internet, but additionally you might want to - uncomment the following forward rules, to make sure your local network is still - reachable through Privoxy: -</para> -<para> - <screen> -# forward 192.168.*.*/ . -# forward 10.*.*.*/ . -# forward 127.*.*.*/ . - </screen> -</para> -<para> - Unencrypted connections to systems in these address ranges will - be as (un)secure as the local network is, but the alternative is - that your browser can't reach the network at all. Then again, - that may actually be desired and if you don't know for sure - that your browser has to be able to reach the local network, - there's no reason to allow it. -</para> -<para> - If you want your browser to be able to reach servers in your local - network by using their names, you will need additional exceptions - that look like this: -</para> -<para> - <screen> -# forward localhost/ . - </screen> -</para> -<para> - Save the modified configuration file and open - <ulink url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status/</ulink> - in your browser, confirm that <application>Privoxy</application> has reloaded its configuration - and that there are no other forward lines, unless you know that you need them. If everything looks good, - refer to - <ulink url="https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#IsMyConnectionPri…">Tor - Faq 4.2</ulink> to learn how to verify that you are really using <application>Tor</application>. -</para> -<para> - Afterward, please take the time to at least skim through the rest - of <application>Tor's</application> documentation. Make sure you understand - what <application>Tor</application> does, why it is no replacement for - application level security, and why you probably don't want to - use it for unencrypted logins. -</para> ]]> -</sect2> - -<sect2 renderas="sect3"> -<title id="sitebreak">Might some things break because header information or -content is being altered?</title> - -<para> - Definitely. It is common for sites to use browser type, browser version, - HTTP header content, and various other techniques in order to dynamically - decide what to display and how to display it. What you see, and what I see, - might be very different. There are many, many ways that this can be handled, - so having hard and fast rules, is tricky. -</para> - -<para> - The <quote>User-Agent</quote> is sometimes used in this way to identify - the browser, and adjust content accordingly. -</para> - -<para> - Also, different browsers use different encodings of non-English - characters, certain web servers convert pages on-the-fly according to the - User Agent header. Giving a <quote>User Agent</quote> with the wrong - operating system or browser manufacturer causes some sites in these languages - to be garbled; Surfers to Eastern European sites should change it to - something closer. And then some page access counters work by looking at the - <quote>Referer</quote> header; they may fail or break if unavailable. The - weather maps of Intellicast have been blocked by their server when no - <quote>Referer</quote> or cookie is provided, is another example. (But you - can forge both headers without giving information away). There are - many other ways things can go wrong when trying to fool a web server. The - results of which could inadvertently cause pages to load incorrectly, - partially, or even not at all. And there may be no obvious clues as to just - what went wrong, or why. Nowhere will there be a message that says - <quote><emphasis>Turn off <literal>fast-redirects</literal> or else!</emphasis> - </quote> -</para> - -<para> - Similar thoughts apply to modifying JavaScript, and, to a lesser degree, - HTML elements. -</para> - -<para> - If you have problems with a site, you will have to adjust your configuration - accordingly. Cookies are probably the most likely adjustment that may - be required, but by no means the only one. -</para> - -</sect2> - - -<sect2 renderas="sect3"> -<title id="caching">Can Privoxy act as a <quote>caching</quote> proxy to -speed up web browsing?</title> -<para> - No, it does not have this ability at all. You want something like - <ulink url="http://www.squid-cache.org/">Squid</ulink> or - <ulink url="http://www.pps.jussieu.fr/~jch/software/polipo/">Polipo</ulink> for this. - And, yes, before you ask, <application>Privoxy</application> can co-exist - with other kinds of proxies like <application>Squid</application>. - See the <ulink url="../user-manual/config.html#FORWARDING">forwarding - chapter</ulink> in the <ulink url="../user-manual/index.html">user - manual</ulink> for details. -</para> -</sect2> - -<sect2 renderas="sect3"> -<title id="firewall">What about as a firewall? Can Privoxy protect me?</title> -<para> - Not in the way you mean, or in the way some firewall vendors claim they can. - <application>Privoxy</application> can help protect your privacy, but can't - protect your system from intrusion attempts. It is, of course, perfectly possible - to use <emphasis>both</emphasis>. -</para> -</sect2> - -<sect2 renderas="sect3"> -<title id="wasted">I have large empty spaces / a checkerboard pattern now where -ads used to be. Why?</title> -<para> - It is technically possible to eliminate banners and ads in a way that frees - their allocated page space. This could easily be done by blocking with - <application>Privoxy's</application> filters, - and eliminating the <emphasis>entire</emphasis> image references from the - HTML page source. -</para> -<para> - But, this would consume considerably more CPU resources (IOW, slow things - down), would likely destroy the layout of some web pages which rely on the - banners utilizing a certain amount of page space, and might fail in other - cases, where the screen space is reserved (e.g. by HTML tables for instance). - Also, making ads and banners disappear without any trace complicates - troubleshooting, and would sooner or later be problematic. -</para> -<para> - The better alternative is to instead let them stay, and block the resulting - requests for the banners themselves as is now the case. This leaves either - empty space, or the familiar checkerboard pattern. -</para> -<para> - So the developers won't support this in the default configuration, but you - can of course define appropriate filters yourself to achieve this. -</para> -</sect2> - -<sect2 renderas="sect3"> -<title id="ssl">How can Privoxy filter Secure (HTTPS) URLs?</title> -<para> - Since secure HTTP connections are encrypted SSL sessions between your browser - and the secure site, and are meant to be reliably <emphasis>secure</emphasis>, - there is little that <application>Privoxy</application> can do but hand the raw - gibberish data though from one end to the other unprocessed. -</para> -<para> - The only exception to this is blocking by host patterns, as the client needs - to tell <application>Privoxy</application> the name of the remote server, - so that <application>Privoxy</application> can establish the connection. - If that name matches a host-only pattern, the connection will be blocked. -</para> -<para> - As far as ad blocking is concerned, this is less of a restriction than it may - seem, since ad sources are often identifiable by the host name, and often - the banners to be placed in an encrypted page come unencrypted nonetheless - for efficiency reasons, which exposes them to the full power of - <application>Privoxy</application>'s ad blocking. -</para> -<para> - <quote>Content cookies</quote> (those that are embedded in the actual HTML or - JS page content, see <literal><ulink - url="../user-manual/actions-file.html#FILTER-CONTENT-COOKIES">filter{content-cookies}</ulink></literal>), - in an SSL transaction will be impossible to block under these conditions. - Fortunately, this does not seem to be a very common scenario since most - cookies come by traditional means. -</para> - -</sect2> - -<sect2 renderas="sect3"> -<title id="secure">Privoxy runs as a <quote>server</quote>. How -secure is it? Do I need to take any special precautions?</title> -<para> - On Unix-like systems, <application>Privoxy</application> can run as a non-privileged - user, which is how we recommend it be run. Also, by default - <application>Privoxy</application> listens to requests from <quote>localhost</quote> - only. -</para> -<para> - The server aspect of <application>Privoxy</application> is not itself directly - exposed to the Internet in this configuration. If you want to have - <application>Privoxy</application> serve as a LAN proxy, this will have to - be opened up to allow for LAN requests. In this case, we'd recommend - you specify only the LAN gateway address, e.g. 192.168.1.1, in the main - <application>Privoxy</application> configuration file and check all <ulink - url="../user-manual/config.html#ACCESS-CONTROL">access control and security - options</ulink>. All LAN hosts can then use this as their proxy address - in the browser proxy configuration, but <application>Privoxy</application> - will not listen on any external interfaces. ACLs can be defined in addition, - and using a firewall is always good too. Better safe than sorry. -</para> - -</sect2> - -<sect2 renderas="sect3" id="turnoff"> -<title>Can I temporarily disable Privoxy?</title> -<para> - &my-app; doesn't have a transparent proxy mode, - but you can toggle off blocking and content filtering. -</para> -<para> - The easiest way to do that is to point your browser - to the remote toggle URL: <ulink - url="http://config.privoxy.org/toggle">http://config.privoxy.org/toggle</ulink>. -</para> -<para> - See the <ulink url="../user-manual/appendix.html#BOOKMARKLETS">Bookmarklets section</ulink> - of the <citetitle>User Manual</citetitle> for an easy way to access this - feature. Note that this is a feature that may need to be enabled in the main - <filename>config</filename> file. -</para> -</sect2> - - -<sect2 renderas="sect3" id="reallyoff"> -<title>When <quote>disabled</quote> is Privoxy totally -out of the picture?</title> -<para> - No, this just means all optional filtering and actions are disabled. - <application>Privoxy</application> is still acting as a proxy, but just - doing less of the things that <application>Privoxy</application> would - normally be expected to do. It is still a <quote>middle-man</quote> in - the interaction between your browser and web sites. See below to bypass - the proxy. -</para> -</sect2> - -<sect2 renderas="sect3" id="turnoff2"> -<title>How can I tell Privoxy to totally ignore certain sites?</title> -<para> - Bypassing a proxy, or proxying based on arbitrary criteria, is purely a browser - configuration issue, not a &my-app; issue. Modern browsers typically do have - settings for not proxying certain sites. Check your browser's help files. -</para> -</sect2> - - -<sect2 renderas="sect3" id="crunch"> -<title>My logs show Privoxy <quote>crunches</quote> -ads, but also its own internal CGI pages. What is a <quote>crunch</quote>?</title> -<para> - A <quote>crunch</quote> simply means <application>Privoxy</application> intercepted - <emphasis>something</emphasis>, nothing more. Often this is indeed ads or - banners, but <application>Privoxy</application> uses the same mechanism for - trapping requests for its own internal pages. For instance, a request for - <application>Privoxy's</application> configuration page at: <ulink - url="http://config.privoxy.org">http://config.privoxy.org</ulink>, is - intercepted (i.e. it does not go out to the 'net), and the familiar CGI - configuration is returned to the browser, and the log consequently will show - a <quote>crunch</quote>. -</para> -<para> - Since version 3.0.7, Privoxy will also log the crunch reason. - If you are using an older version you might want to upgrade. -</para> -</sect2> - -<sect2 renderas="sect3" id="downloads"> -<title>Can Privoxy effect files that I download -from a webserver? FTP server?</title> -<para> - From the webserver's perspective, there is no difference between - viewing a document (i.e. a page), and downloading a file. The same is true of - <application>Privoxy</application>. If there is a match for a <literal><ulink - url="../user-manual/actions-file.html#BLOCK">block</ulink></literal> pattern, - it will still be blocked, and of course this is obvious. - </para> - <para> - Filtering is potentially more of a concern since the results are not always - so obvious, and the effects of filtering are there whether the file is simply - viewed, or downloaded. And potentially whether the content is some obnoxious - advertisement, or Mr. Jimmy's latest/greatest source code jewel. Of course, - one of these presumably is <quote>bad</quote> content that we don't want, and - the other is <quote>good</quote> content that we do want. - <application>Privoxy</application> is blind to the differences, and can only - distinguish <quote>good from bad</quote> by the configuration parameters - <emphasis>we</emphasis> give it. -</para> -<para> - <application>Privoxy</application> knows the differences in files according - to the <quote>Content Type</quote> as reported by the webserver. If this is - reported accurately (e.g. <quote>application/zip</quote> for a zip archive), - then <application>Privoxy</application> knows to ignore these where - appropriate. <application>Privoxy</application> potentially can filter HTML - as well as plain text documents, subject to configuration parameters of - course. Also, documents that are of an unknown type (generally assumed to be - <quote>text/plain</quote>) can be filtered, as will those that might be - incorrectly reported by the webserver. If such a file is a downloaded file - that is intended to be saved to disk, then any content that might have been - altered by filtering, will be saved too, for these (probably rare) cases. -</para> -<para> - Note that versions later than 3.0.2 do NOT filter document types reported as - <quote>text/plain</quote>. Prior to this, <application>Privoxy</application> - did filter this document type. -</para> -<para> - In short, filtering is <quote>ON</quote> if a) the content type as reported - by the webserver is appropriate <emphasis>and</emphasis> b) the configuration - allows it (or at least does not disallow it). That's it. There is no magic - cookie anywhere to say this is <quote>good</quote> and this is - <quote>bad</quote>. It's the configuration that lets it all happen or not. -</para> -<para> - If you download text files, you probably do not want these to be filtered, - particularly if the content is source code, or other critical content. Source - code sometimes might be mistaken for Javascript (i.e. the kind that might - open a pop-up window). It is recommended to turn off filtering for download - sites (particularly if the content may be plain text files and you are using - version 3.0.2 or earlier) in your <filename>user.action</filename> file. And - also, for any site or page where making <emphasis>any</emphasis> changes at - all to the content is to be avoided. -</para> -<para> - <application>Privoxy</application> does not do FTP at all, only HTTP - and HTTPS (SSL) protocols. -</para> -</sect2> - -<sect2 renderas="sect3" id="downloads2"> -<title>I just downloaded a Perl script, and Privoxy -altered it! Yikes, what is wrong!</title> -<para> - Please read above. -</para> -</sect2> - -<sect2 renderas="sect3" id="hostsfile"> -<title>Should I continue to use a <quote>HOSTS</quote> file for ad-blocking?</title> -<para> - One time-tested technique to defeat common ads is to trick the local DNS - system by giving a phony IP address for the ad generator in the local - <filename>HOSTS</filename> file, typically using <literal>127.0.0.1</literal>, aka - <literal>localhost</literal>. This effectively blocks the ad. -</para> -<para> - There is no reason to use this technique in conjunction with - <application>Privoxy</application>. <application>Privoxy</application> - does essentially the same thing, much more elegantly and with much more - flexibility. A large <filename>HOSTS</filename> file, in fact, not only - duplicates effort, but may get in the way and seriously slow down your system. - It is recommended to remove such entries from your <filename>HOSTS</filename> file. If you think - your hosts list is neglected by <application>Privoxy's </application> - configuration, consider adding your list to your <filename>user.action</filename> file: -</para> -<para> - <screen> - { +block } - www.ad.example1.com - ad.example2.com - ads.galore.example.com - etc.example.com</screen> -</para> -</sect2> - -<sect2 renderas="sect3" id="seealso"> -<title>Where can I find more information about Privoxy -and related issues?</title> - - &seealso; - - - -</sect2> - -<sect2 renderas="sect3" id="microsuck"> -<title>I've noticed that Privoxy changes <quote>Microsoft</quote> to -<quote>MicroSuck</quote>! Why are you manipulating my browsing?</title> - -<para> - We're not. The text substitutions that you are seeing are disabled - in the default configuration as shipped. You have either manually - activated the <quote><literal>fun</literal></quote> filter which - is clearly labeled <quote>Text replacements for subversive browsing - fun!</quote> or you are using an older Privoxy version and have implicitly - activated it by choosing the <quote>Advanced</quote> profile in the - web-based editor. Please upgrade. -</para> -</sect2> - -<sect2 renderas="sect3" id="valid"> -<title>Does Privoxy produce <quote>valid</quote> HTML (or XHTML)?</title> - -<para> - Privoxy generates HTML in both its own <quote>templates</quote>, and possibly - whenever there are text substitutions via a &my-app; filter. While this - should always conform to the HTML 4.01 specifications, it has not been - validated against this or any other standard. -</para> -</sect2> - - -</sect1> - - - - -<sect1 id="trouble"> -<title>Troubleshooting</title> - -<sect2 renderas="sect3"> -<title id="refused">I cannot connect to any websites. Or, I am getting -<quote>connection refused</quote> message with every web page. Why?</title> -<para> - There are several possibilities: -</para> -<para> -<itemizedlist> -<listitem><para> -<application>Privoxy</application> is not running. Solution: verify - that &my-app; is installed correctly, has not crashed, and is indeed running. - Turn on <application>Privoxy's</application> logging, and look at the logs to see what they say. -</para></listitem> - <listitem><para>Or your browser is configured for a different port than what - <application>Privoxy</application> is using. Solution: verify that &my-app; - and your browser are set to the same port (<literal>listen-address</literal>). -</para></listitem> - <listitem><para>Or if using a forwarding rule, you have a configuration problem or a - problem with a host in the forwarding chain. Solution: temporarily alter your - configuration and take the forwarders out of the equation. -</para></listitem> - <listitem><para> - Or you have a firewall that is interfering and blocking you. Solution: - try disabling or removing the firewall as a simple test. - </para></listitem> -</itemizedlist> -</para> - -</sect2> - - -<sect2 renderas="sect3" id="error503"> -<title>Why am I getting a 503 Error (WSAECONNREFUSED) on every page?</title> - <para> - More than likely this is a problem with your TCP/IP networking. ZoneAlarm has - been reported to cause this symptom -- even if not running! The solution is - to either fight the ZA configuration, or uninstall ZoneAlarm, and then find - something better behaved in its place. Other personal firewall type products - may cause similar type problems if not configured correctly. - </para> -</sect2> - -<sect2 renderas="sect3"> -<title id="flushit">I just added a new rule, but the steenkin ad is -still getting through. How?</title> -<para> - If the ad had been displayed before you added its URL, it will probably be - held in the browser's cache for some time, so it will be displayed without - the need for any request to the server, and <application>Privoxy</application> - will not be involved. Flush the browser's caches, and then try again. -</para> - -<para> - If this doesn't help, you probably have an error in the rule you - applied. Try pasting the full URL of the offending ad into <ulink - url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink> - and see if it really matches your new rule. Blocking ads is like blocking - spam: a lot of tinkering is required to stay ahead of the game. And - remember you need to block the URL of the ad in question, which may be - entirely different from the site URL itself. Most ads are hosted on different - servers than the main site itself. If you right-click on the ad, you should - be able to get all the relevant information you need. Alternately, you can - find the correct URL by looking at <application>Privoxy's</application> logs - (you may need to enable logging in the main config file if its disabled). -</para> -<para> - Below is a slightly modified real-life log snippet that originates with one - requested URL: <literal>www.example.com</literal> (name of site was changed - for this example, the number of requests is real). You can see in this the - complexity of what goes into making up this one <quote>page</quote>. There - are eight different domains involved here, with thirty two separate URLs - requested in all, making up all manner of images, Shockwave Flash, - JavaScript, CSS stylesheets, scripts, and other related content. Some of this - content is obviously <quote>good</quote> or <quote>bad</quote>, but not all. - Many of the more questionable looking requests, are going to outside domains - that seem to be identifying themselves with suspicious looking names, making - our job a little easier. &my-app; has <quote>crunched</quote> (meaning caught - and BLOCKED) quite a few items in this example, but perhaps missed a few as well. -</para> -<para> -<screen> -<![CDATA[ -Request: www.example.com/ -Request: www.example.com/favicon.ico -Request: img.example.com/main.css -Request: img.example.com/sr.js -Request: example.betamarker.com/example.html -Request: www.lik-sang.com/Banners/bestsellers/skyscraper.php?likref=BSellers -Request: img.example.com/pb.png -Request: www.google-analytics.com/urchin.js crunch! (Blocked) -Request: www.advertising-department.com/ats/switch.ps.php?26856 crunch! (Blocked) -Request: img.example.com/p.gif -Request: www.popuptraffic.com/assign.php?l=example&mode=behind crunch! (Blocked) -Request: www.popuptraffic.com/scripts/popup.php?hid=5c3cf&tmpl=PBa.tmpl crunch! (Blocked) -Request: www.popuptraffic.com/assign.php?l=example crunch! (Blocked) -Request: www.lik-sang.com/Banners/best_sellers/best_sellers.css -Request: www.adtrak.net/adx.js crunch! (Blocked) -Request: img.example.com/hbg.gif -Request: img.example.com/example.jpg -Request: img.example.com/mt.png -Request: img.example.com/mm.png -Request: img.example.com/mb.png -Request: www.popuptraffic.com/scripts/popup.php?hid=a71b91fa5&tmpl=Ua.tmp crunch! (Blocked) -Request: www.example.com/tracker.js -Request: www.lik-sang.com/Banners/best_sellers/lsi_head.gif -Request: www.adtrak.net/adjs.php?n=020548130&what=zone:61 crunch! (Blocked) -Request: www.adtrak.net/adjs.php?n=463594413&what=zone:58&source=Ua crunch! (Blocked) -Request: www.lik-sang.com/Banners/best_sellers/bottomani.swf -Request: mmm.elitemediagroup.net/install.php?allowpop=no&popupmincook=0&allowsp2=1 crunch! (Blocked) -Request: www.example.com/tracker.js?screen=1400x1050&win=962x693 -Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=61 crunch! (Blocked) -Request: 66.70.21.80/scripts/click.php?hid=5c3cf599a9efd0320d26&si -Request: 66.70.21.80/img/pixel.gif -Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=58&source=Ua&blo… crunch! (Blocked) -Request: 66.70.21.80/scripts/click.php?hid=a71b9f6504b0c5681fa5&si=Ua -]]> -</screen> -</para> -<para> - Despite 12 out of 32 requests being blocked, the page looked, and seemed to - behave perfectly <quote>normal</quote> (minus some ads, of course). -</para> - -</sect2> - -<sect2 id="badsite" renderas="sect3"> -<title >One of my favorite sites does not work with Privoxy. -What can I do?</title> - -<para> - First verify that it is indeed a <application>Privoxy</application> problem, - by toggling off <application>Privoxy</application> through <ulink - url="http://config.privoxy.org/toggle">http://config.privoxy.org/toggle</ulink> - (the toggle feature may need to be enabled in the main - <filename>config</filename>), - and then shift-reloading the problem page (i.e. holding down the shift key - while clicking reload. Alternatively, flush your browser's disk and memory - caches). -</para> - -<para> - If the problem went away, we know we have a configuration related problem. - Now go to <ulink - url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink> - and paste the full URL of the page in question into the prompt. See which - actions are being applied to the URL, and which matches in which actions - files are responsible for that. It might be helpful also to look at your logs - for this site too, to see what else might be happening (note: logging may need - to be enabled in the main config file). Many sites are - complex and require a number of related pages to help present their content. - Look at what else might be used by the page in question, and what of that - might be <emphasis>required</emphasis>. - Now, armed with this information, go to - <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink> - and select the appropriate actions files for editing. </para> -<para> - You can now either look for a section which disables the actions that - you suspect to cause the problem and add a pattern for your site there, - or make up a completely new section for your site. In any case, the recommended - way is to disable only the prime suspect, reload the problem page, and only - if the problem persists, disable more and more actions until you have - identified the culprit. You may or may not want to turn the other actions - on again. Remember to flush your browser's caches in between any such changes! -</para> -<para> - Alternately, if you are comfortable with a text editor, you can accomplish - the same thing by editing the appropriate actions file. Probably the easiest - way to deal with such problems when editing by hand is to add your - site to a <literal>{ fragile }</literal> section in <filename>user.action</filename>, - which is an alias that turns off most <quote>dangerous</quote> - actions, but is also likely to turn off more actions then needed, and thus lower - your privacy and protection more than necessary, -</para> -<para> - Troubleshooting actions is discussed in more detail in the <ulink - url="../user-manual/appendix.html#ACTIONSANAT">User Manual appendix, - Troubleshooting: the Anatomy of an Action</ulink>. - There is also an <ulink - url="../user-manual/actions-file.html#ACT-EXAMPLES">actions tutorial</ulink> - with general configuration information and examples. -</para> -<para> - As a last resort, you can always see if your browser has a setting that will - bypass the proxy setting for selective sites. Modern browsers can do this. -</para> - -</sect2> - - - -<sect2 id="dun" renderas="sect3"> -<title>After installing Privoxy, I have to log in -every time I start IE. What gives?</title> - -<para> - This is a quirk that effects the installation of - <application>Privoxy</application>, in conjunction with Internet Explorer and - Internet Connection Sharing on Windows 2000 and Windows XP. The symptoms may - appear to be corrupted or invalid DUN settings, or passwords. -</para> - -<para> - When setting up an NT based Windows system with - <application>Privoxy</application> you may find that things do not seem to be - doing what you expect. When you set your system up you will probably have set - up Internet Connection Sharing (ICS) with Dial up Networking (DUN) when - logged in with administrator privileges. You will probably have made this DUN - connection available to other accounts that you may have set-up on your - system. E.g. Mum or Dad sets up the system and makes accounts suitably - configured for the kids. -</para> - -<para> - When setting up <application>Privoxy</application> in this environment you - will have to alter the proxy set-up of Internet Explorer (IE) for the - specific DUN connection on which you wish to use - <application>Privoxy</application>. When you do this the ICS DUN set-up - becomes user specific. In this instance you will see no difference if you - change the DUN connection under the account used to set-up the connection. - However when you do this from another user you will notice that the DUN - connection changes to make available to "Me only". You will also find that - you have to store the password under each different user! -</para> - -<para> - The reason for this is that each user's set-up for IE is user specific. Each - set-up DUN connection and each LAN connection in IE store the settings for - each user individually. As such this enforces individual configurations - rather than common ones. Hence the first time you use a DUN connection after - re-booting your system it may not perform as you expect, and prompt you for - the password. Just set and save the password again and all should be OK. -</para> - -<para> -[Thanks to Ray Griffith for this submission.] -</para> -</sect2> - - - -<sect2 id="ftp" renderas="sect3"> -<title>I cannot connect to any FTP sites. Privoxy - is blocking me.</title> - <para> - <application>Privoxy</application> cannot act as a proxy for FTP traffic, - so do not configure your browser to use <application>Privoxy</application> - as an FTP proxy. The same is true for <emphasis>any protocol other than HTTP - or HTTPS (SSL)</emphasis>. - </para> - <para> - Most browsers understand FTP as well as HTTP. If you connect to a site, with - a URL like <literal>ftp://ftp.example.com</literal>, your browser is making - an FTP connection, and not a HTTP connection. So while your browser may - speak FTP, <application>Privoxy</application> does not, and cannot proxy - such traffic. - </para> - <para> - To complicate matters, some systems may have a generic <quote>proxy</quote> - setting, which will enable various protocols, including - <emphasis>both</emphasis> HTTP and FTP proxying! So it is possible to - accidentally enable FTP proxying in these cases. And of course, if this - happens, <application>Privoxy</application> will indeed cause problems since - it does not know FTP. <![%p-newstuff;[Newer version will give a sane error - message if a FTP connection is attempted.]]> Just disable the FTP setting - and all will be well again. - </para> - <para> - Will <application>Privoxy</application> ever proxy FTP traffic? Unlikely. - There just is not much reason, and the work to make this happen is more than - it may seem. - </para> -</sect2> - - -<sect2 id="macosxie" renderas="sect3"> -<title>In Mac OS X, I can't configure Microsoft Internet Explorer to use - Privoxy as the HTTP proxy.</title> - <para> - Microsoft Internet Explorer (in versions like 5.1) respects system-wide - network settings. In order to change the HTTP proxy, open System - Preferences, and click on the Network icon. In the settings pane that - comes up, click on the Proxies tab. Ensure the "Web Proxy (HTTP)" checkbox - is checked and enter <literal>127.0.0.1</literal> in the entry field. - Enter <literal>8118</literal> in the Port field. The next time you start - IE, it should reflect these values. - </para> -</sect2> - - -<sect2 renderas="sect3" id="macosxuninstall"> -<title>In Mac OS X, I dragged the Privoxy folder to the trash in order to - uninstall it. Now the finder tells me I don't have sufficient privileges to - empty the trash.</title> - <para> - Note: This ONLY applies to privoxy 3.0.6 and earlier. - </para> - <para> - Just dragging the <application>Privoxy</application> folder to the trash is - not enough to delete it. <application>Privoxy</application> supplies an - <application>uninstall.command</application> file that takes care of - these details. Open the trash, drag the <application>uninstall.command</application> - file out of the trash and double-click on it. You will be prompted for - confirmation and the administration password. - </para> - <para> - The trash may still appear full after this command; emptying the trash - from the desktop should make it appear empty again. - </para> -</sect2> - - - -<sect2 renderas="sect3" id="macosximages"> -<title>In Mac OS X Panther (10.3), images often fail to load and/or I - experience random delays in page loading. I'm using - <literal>localhost</literal> as my browser's proxy setting.</title> - <para> - We believe this is due to an IPv6-related bug in Mac OS X, but don't fully - understand the issue yet. In any case, changing the proxy setting to - <literal>127.0.0.1</literal> instead of <literal>localhost</literal> - works around the problem. - </para> -</sect2> - - - -<sect2 renderas="sect3" id="blankpage"> -<title>I get a completely blank page at one site. <quote>View Source</quote> - shows only: <markup><![CDATA[<html><body></body></html>]]></markup>. Without - Privoxy the page loads fine.</title> - <para> - Chances are that the site suffers from a bug in - <ulink url="http://www.php.net/"><application>PHP</application></ulink>, - which results in empty pages being sent if the client explicitly requests - an uncompressed page, like <application>Privoxy</application> does. - This bug has been fixed in PHP 4.2.3. - </para> - <para> - To find out if this is in fact the source of the problem, try adding - the site to a <literal>-prevent-compression</literal> section in - <filename>user.action</filename>: - </para> - <screen> - # Make exceptions for ill-behaved sites: - # - {-prevent-compression} - .example.com</screen> - <para> - If that works, you may also want to report the problem to the - site's webmasters, telling them to use zlib.output_compression - instead of ob_gzhandler in their PHP applications (workaround) - or upgrade to PHP 4.2.3 or later (fix). - </para> -</sect2> - -<sect2 renderas="sect3" id="nohostname"> -<title>My logs show many <quote>Unable to get my own hostname</quote> lines. -Why?</title> -<para> - <application>Privoxy</application> tries to get the hostname of the system - its running on from the IP address of the system interface it is bound to - (from the <filename>config</filename> file - <emphasis>listen-address</emphasis> setting). If the system cannot supply - this information, <application>Privoxy</application> logs this condition. -</para> -<para> - Typically, this would be considered a minor system configuration error. It is - not a fatal error to <application>Privoxy</application> however, but may - result in a much slower response from <application>Privoxy</application> on - some platforms due to DNS timeouts. -</para> -<para> - This can be caused by a problem with the local <filename>hosts</filename> - file. If this file has been changed from the original, try reverting it to - see if that helps. Make sure whatever name(s) are used for the local system, - that they resolve both ways. -</para> -<para> - You should also be able to work around the problem with the - <ulink url="../user-manual/config.html#HOSTNAME">hostname option</ulink>. -</para> -</sect2> - -<sect2 renderas="sect3" id="inuse"> -<title>When I try to launch Privoxy, I get an -error message <quote>port 8118 is already in use</quote> (or similar wording). -Why?</title> -<para> - Port 8118 is <application>Privoxy's</application> default TCP - <quote>listening</quote> port. Typically this message would mean that there - is already one instance of <application>Privoxy</application> running, and - your system is actually trying to start a second - <application>Privoxy</application> on the same port, which will not work. - (You can have multiple instances but they must be assigned different ports.) - How and why this might happen varies from platform to platform, but you need - to check your installation and start-up procedures. -</para> -</sect2> - -<sect2 renderas="sect3" id="demoronizer"> -<title> - Pages with UTF-8 fonts are garbled. -</title> -<para> - This is caused by the <quote>demoronizer</quote> filter. You should either - upgrade <application>Privoxy</application>, or at least upgrade to the most - recent <filename>default.action</filename> file available from <ulink - url="http://sourceforge.net/project/showfiles.php?group_id=11118">SourceForge</ulink>. - Or you can simply disable the demoronizer filter. -</para> -</sect2> - -<sect2 renderas="sect3" id="demoronizer2"> -<title> - Why are binary files (such as images) corrupted when Privoxy - is used? -</title> -<para> - This may also be caused by the <quote>demoronizer</quote> filter, - in conjunction with a web server that is misreporting the content type. Binary - files are exempted from <application>Privoxy's</application> filtering - (unless the web server by mistake says the file is something else). Either - upgrade <application>Privoxy</application>, or go to the most recent - <filename>default.action</filename> file available from <ulink - url="http://sourceforge.net/project/showfiles.php?group_id=11118">SourceForge</ulink>. -</para> -</sect2> - -<sect2 renderas="sect3" id="demoronizer3"> -<title> - What is the <quote>demoronizer</quote> and why is it there? -</title> -<para> - The original demoronizer was a Perl script that cleaned up HTML pages which - were created with certain Microsoft products. MS has used proprietary extensions - to standardized font encodings (ISO 8859-1), which has caused problems for pages - that are viewed with non-Microsoft products (and are expecting to see a - standard set of fonts). The demoronizer corrected these errors so the pages - displayed correctly. <application>Privoxy</application> borrowed from this - script, introducing a filter based on the original demoronizer, which in turn could - correct these errors on the fly. -</para> -<para> - But this is only needed in some situations, and will cause serious problems in some - other situations. -</para> -<para> - If you are using Microsoft products, you do not need it. If you need to view - pages with UTF-8 characters (such as Cyrillic or Chinese), then it will - cause corruption of the fonts, and thus <emphasis>should not be on</emphasis>. -</para> -<para> - On the other hand, if you use non-Microsoft products, and you occasionally - notice weird characters on pages, you might want to try it. -</para> -</sect2> - -<sect2 renderas="sect3" id="windowopen"> -<title> - Why do I keep seeing <quote>PrivoxyWindowOpen()</quote> in raw source code? -</title> -<para> - <application>Privoxy</application> is attempting to disable malicious - <ulink url="http://en.wikipedia.org/wiki/Javascript">Javascript</ulink> - in this case, with the <literal>unsolicited-popups</literal> - filter. <application>Privoxy</application> cannot tell very well - <quote>good</quote> code snippets from <quote>bad</quote> code snippets. -</para> -<para> - If you see this in HTML source, and the page displays without problems, then - this is good, and likely some pop-up window was disabled. If you see this - where it is causing a problem, such as a downloaded program source code file, - then you should set an exception for this site or page such that the - integrity of the page stays in tact by disabling all filtering. -</para> -</sect2> - -<sect2 renderas="sect3" id="dnserrors"> -<title> - I am getting too many DNS errors like <quote>404 No Such Domain</quote>. Why - can't Privoxy do this better? -</title> -<para> - There are potentially several factors here. First of all, the DNS resolution - is done by the underlying operating system -- not - <application>Privoxy</application> itself. <application>Privoxy</application> - merely initiates the process and hands it off, and then later reports - whatever the outcome was and tries to give a coherent message if there seems - to be a problem. In some cases, this might otherwise be mitigated by the - browser itself which might try some work-arounds and alternate approaches (e.g - adding <quote>www.</quote> to the URL). -</para> -<para> - In other cases, if <application>Privoxy</application> is being chained - with another proxy, this could complicate the issue, and cause undue - delays and timeouts. In the case of a <quote>socks4a</quote> proxy, the socks - server handles all the DNS. <application>Privoxy</application> would just be - the <quote>messenger</quote> which is reporting whatever problem occurred - downstream, and not the root cause of the error. -</para> -<![%p-newstuff;[ -<para> - In any case, versions newer than 3.0.3 include various improvements to help - <application>Privoxy</application> better handle these cases. -</para>]]> -</sect2> - -<sect2 renderas="sect3" id="allcpu"> -<title> - At one site Privoxy just hangs, and starts taking - all CPU. Why is this? -</title> -<para> - This is probably a manifestation of the <quote>100% cpu</quote> problem that - occurs on pages containing many (thousands upon thousands) of blank lines. The blank lines - are in the raw HTML source of the page, and the browser just ignores them. But the - pattern matching in <application>Privoxy's</application> page filtering - mechanism is trying to match against absurdly long strings and this becomes - very CPU-intensive, taking a long, long time to complete. -</para> -<para> - Until a better solution comes along, disable filtering on these pages, - particularly the <literal>js-annoyances</literal> and - <literal>unsolicited-popups</literal> filters. If you run into this problem - with a recent &my-app; version, please send a problem report. -</para> -</sect2> - -<sect2 renderas="sect3" id="slowcrawl"> -<title>I just installed Privoxy, and all my -browsing has slowed to a crawl. What gives? </title> -<para> - This should not happen, and for the overwhelming number of users world-wide, - it does not happen. I would suspect some inadvertent interaction of software - components such as anti-virus software, spyware protectors, personal - firewalls or similar components. Try disabling (or uninstalling) these one - at a time and see if that helps. Either way, if you are using a - recent &my-app; version, please report the problem. -</para> -</sect2> - -<sect2 renderas="sect3" id="preventcomp"> -<title>Why do my filters work on some sites but not on others? </title> -<para> - It's probably due to compression. It is a common practice for web servers to - send their content <quote>compressed</quote> in order to speed things up, and - then let the browser <quote>uncompress</quote> them. When compiled with zlib support - &my-app; can decompress content before filtering, otherwise you may want to enable -<ulink - url="../user-manual/actions-file.html#PREVENT-COMPRESSION">prevent-compression</ulink>. -</para> -<para> - As of &my-app; 3.0.9, zlib support is enabled in the default builds. -</para> -</sect2> - - -<sect2 renderas="sect3" id="ssl-warnings"> -<title>On some HTTPS sites my browser warns me about unauthenticated content, - the URL bar doesn't get highlighted and the lock symbol appears to be broken. - What's going on?</title> -<para> - Probably the browser is requesting ads through HTTPS and &my-app; - is blocking the requests. Privoxy's error messages are delivered - unencrypted and while it's obvious for the browser that the HTTPS - request is already blocked by the proxy, some warn about unauthenticated - content anyway. -</para> -<para> - To work around the problem you can redirect those requests to an invalid - local address instead of blocking them. While the redirects aren't - encrypted either, many browsers don't care. They simply follow the - redirect, fail to reach a server and display an error message instead - of the ad. -</para> -<para> - To do that, enable logging to figure out which requests get blocked by - &my-app; and add the hosts (no path patterns) to a section like this: -</para> -<para> -<screen> -<![CDATA[ -{+redirect{http://127.0.0.1:0/} -block -limit-connect} -.ivwbox.de:443/ -]]> -</screen> -</para> -<para> - Additionally you have to configure your browser to contact - <quote>127.0.0.1:0</quote> directly (instead of through &my-app;). -</para> -<para> - To add a proxy exception in <application>Mozilla Firefox</application> - open the <quote>Preferences</quote>, click the <quote>Settings</quote> - button located on the <quote>Network</quote> tab in the <quote>Advanced</quote> - section, and add <quote>127.0.0.1:0</quote> in the <quote>No Proxy for:</quote> - field. -</para> -</sect2> - - -<sect2 renderas="sect3" id="se-linux"> -<title>I get selinux error messages. How can I fix this?</title> -<para> - Please report the problem to the creator of your selinux policies. -</para> -<para> - The problem is that some selinux policy writers aren't familiar - with the application they are trying to <quote>secure</quote> and - thus create policies that make no sense. -</para> -<para> - In <application>Privoxy's</application> case the problem usually - is that the policy only allows outgoing connections for certain - destination ports (e.g. 80 and 443). While this may cover the - standard ports, websites occasionally use other ports as well. - This isn't a security problem and therefore <application>Privoxy's</application> - default configuration doesn't block these requests. -</para> -<para> - If you really want to block these ports (and don't be able - to load websites that don't use standard ports), you should - configure Privoxy to block these ports as well, so it doesn't - trigger the selinux warnings. -</para> -</sect2> - - -<sect2 renderas="sect3" id="gentoo-ricers"> -<title>I compiled &my-app; with Gentoo's portage and it appears to be very slow. Why?</title> -<para> - Probably you unintentionally compiled &my-app; without threading support - in which case requests have to be serialized and only one can be served - at the same time. -</para> -<para> - Check your <quote>USE</quote> flags and make sure they include - <quote>threads</quote>. If they don't, add the flag and rebuild &my-app;. -</para> -<para> - If you compiled &my-app; with threading support (on POSIX-based systems), - the <quote>Conditional #defines</quote> section on <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink> - will list <quote>FEATURE_PTHREAD</quote> as <quote>enabled</quote>. -</para> -</sect2> - - -</sect1> - -  - <sect1 id="contact"><title>Contacting the developers, Bug Reporting and Feature Requests</title> - - &contacting; - - </sect1> - - -<sect1 id="copyright"><title>Privoxy Copyright, License and History</title> - -  - &copyright; -  - - - <para> - Portions of this document are <quote>borrowed</quote> from the original - <application>Junkbuster</application> (tm) FAQ, and modified as - appropriate for <application>Privoxy</application>. - </para> - -  - <sect2><title>License</title> -  - &license; -  - </sect2> -  - -  - <sect2><title>History</title> -  - &history; -  - </sect2> - - </sect1> -  - - - - - - - - - - -  - -</article> diff --git a/external/privoxy/doc/source/history.sgml b/external/privoxy/doc/source/history.sgml deleted file mode 100644 index 9e8b2fa..0000000 --- a/external/privoxy/doc/source/history.sgml +++ /dev/null @@ -1,71 +0,0 @@ - - -<para> - A long time ago, there was the - <ulink url="http://www.junkbusters.com/ijb.html"><application>Internet Junkbuster</application></ulink>, - by Anonymous Coders and <ulink url="http://www.junkbusters.com/">Junkbusters - Corporation</ulink>. This saved many users a lot of pain in the early days of - web advertising and user tracking. -</para> - -<para> - But the web, its protocols and standards, and with it, the techniques for - forcing ads on users, give up autonomy over their browsing, and - for tracking them, keeps evolving. Unfortunately, the <application>Internet - Junkbuster</application> did not. Version 2.0.2, published in 1998, was - (and is) the last official - <ulink url="http://www.junkbusters.com/ijbdist.html#release">release</ulink> - available from <ulink url="http://www.junkbusters.com">Junkbusters Corporation</ulink>. - Fortunately, it had been released under the GNU - <ulink url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html">GPL</ulink>, - which allowed further development by others. -</para> - -<para> - So Stefan Waldherr started maintaining an improved version of the - software, to which eventually a number of people contributed patches. - It could already replace banners with a transparent image, and had a first - version of pop-up killing, but it was still very closely based on the - original, with all its limitations, such as the lack of HTTP/1.1 support, - flexible per-site configuration, or content modification. The last release - from this effort was version 2.0.2-10, published in 2000. -</para> - -<para> - Then, some - <ulink url="http://www.privoxy.org/user-manual/copyright.html#AUTHORS">developers</ulink> - picked up the thread, and started turning the software inside out, upside down, - and then reassembled it, adding many - <ulink url="http://www.privoxy.org/user-manual/introduction.html#FEATURES">new - features</ulink> along the way. -</para> - -<para> - The result of this is <application>Privoxy</application>, whose first - stable version, 3.0, was released August, 2002. -  -</para> diff --git a/external/privoxy/doc/source/install.sgml b/external/privoxy/doc/source/install.sgml deleted file mode 100644 index bba9ccc..0000000 --- a/external/privoxy/doc/source/install.sgml +++ /dev/null @@ -1,106 +0,0 @@ -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ -<!entity % dummy "IGNORE"> -<!entity buildsource SYSTEM "buildsource.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-stable "INCLUDE"> -<!entity % p-not-stable "IGNORE"> -<!entity % p-alpha "IGNORE"> -<!entity % p-beta "IGNORE"> -<!entity % p-text "INCLUDE">  -<!entity % p-doc "IGNORE">  -<!entity % p-readme "INCLUDE">  -]> - -<article id="index"> -<artheader> -<![%dummy;[ - <para> - <comment> - This is here to keep vim syntax file from breaking :/ - If I knew enough to fix it, I would. - PLEASE DO NOT REMOVE! HB: hal(a)foobox.net - </comment> - </para> -]]> -<abstract> -<para> - <literal> - <msgtext> - <literallayout> -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/doc/source/install.sgml,v $ - * - * Purpose : INSTALL file to help with installing from source. - * - * Copyright : Written by and Copyright (C) 2001-2009 the - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - *********************************************************************/ - </literallayout> - </msgtext> - </literal> -</para> - - </abstract> -</artheader> - -<para> - <msgtext> - - - &buildsource; - - </msgtext> -</para> - - -</article> diff --git a/external/privoxy/doc/source/ldp.dsl.in b/external/privoxy/doc/source/ldp.dsl.in deleted file mode 100644 index a86de0d..0000000 --- a/external/privoxy/doc/source/ldp.dsl.in +++ /dev/null @@ -1,420 +0,0 @@ -<!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [ -<!ENTITY % html "IGNORE"> -<![%html;[ -<!ENTITY % print "IGNORE"> -<!ENTITY docbook.dsl SYSTEM "@DKPREFIX@/html/docbook.dsl" CDATA dsssl> -]]> -<!ENTITY % print "INCLUDE"> -<![%print;[ -<!ENTITY docbook.dsl SYSTEM "@DKPREFIX@/print/docbook.dsl" CDATA dsssl> -]]> -]> - - - -<style-sheet> - -<style-specification id="print" use="docbook"> -<style-specification-body> - -;; ============================== -;; customize the print stylesheet -;; ============================== -;; -;; see http://docbook.sourceforge.net/projects/dsssl/doc/print.html -;; - -(define %indent-screen-lines% - ;; Indent lines in a 'Screen'? - #t) - -(define %callout-fancy-bug% - ;; Use fancy callout bugs? - #t) - -(define %chap-app-running-heads% - ;; Generate running headers and footers on chapter-level elements? - #t) - -(define %chap-app-running-head-autolabel% - ;; Put chapter labels in running heads? - #t) - -;; this is necessary because right now jadetex does not understand -;; symbolic entities, whereas things work well with numeric entities. -(declare-characteristic preserve-sdata? - "UNREGISTERED::James Clark//Characteristic::preserve-sdata?" - #f) - -;; put the legal notice in a separate file -(define %generate-legalnotice-link% - #t) - -;; use graphics in admonitions, and have their path be "stylesheet-images" -;; NO: they do not yet look very good -(define %admon-graphics-path% - "./stylesheet-images/") - -(define %admon-graphics% - #f) - -(define %funcsynopsis-decoration% - ;; make funcsynopsis look pretty - #t) - -;;(define %shade-verbatim% -;; #t) - -(define %section-autolabel% #t) - ;; For enumerated sections (1.1, 1.1.1, 1.2, etc.) - -;; HB changed TOC depth to 3 levels. -(define (toc-depth nd) - 3) - -;; HB added 03/20/02, see dbparam.dsl ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -(define %body-attr% - ;; REFENTRY body-attr - ;; PURP What attributes should be hung off of BODY? - ;; DESC - ;; A list of the the BODY attributes that should be generated. - ;; The format is a list of lists, each interior list contains the - ;; name and value of a BODY attribute. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - (list - (list "BGCOLOR" "#EEEEEE") - (list "TEXT" "#000000") - (list "LINK" "#0000FF") - (list "VLINK" "#840084") - (list "ALINK" "#0000FF"))) - -(define %stylesheet% - ;; REFENTRY stylesheet - ;; PURP Name of the stylesheet to use - ;; DESC - ;; The name of the stylesheet to place in the HTML LINK TAG, or '#f' to - ;; suppress the stylesheet LINK. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - "../p_doc.css") - -(define %stylesheet-type% - ;; REFENTRY stylesheet-type - ;; PURP The type of the stylesheet to use - ;; DESC - ;; The type of the stylesheet to place in the HTML LINK TAG. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - "text/css") - -(define %css-liststyle-alist% - ;; REFENTRY css-liststyle-alist - ;; PURP Map DocBook OVERRIDE and MARK attributes to CSS - ;; DESC - ;; If '%css-decoration%' is turned on then the list-style-type property of - ;; list items will be set to reflect the list item style selected in the - ;; DocBook instance. This associative list maps the style type names used - ;; in your instance to the appropriate CSS names. If no mapping exists, - ;; the name from the instance will be used. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - '(("bullet" "disc") - ("box" "square"))) - -(define %css-decoration% - ;; REFENTRY css-decoration - ;; PURP Enable CSS decoration of elements - ;; DESC - ;; If '%css-decoration%' is turned on then HTML elements produced by the - ;; stylesheet may be decorated with STYLE attributes. For example, the - ;; LI tags produced for list items may include a fragment of CSS in the - ;; STYLE attribute which sets the CSS property "list-style-type". - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - #t) - -;; swa1 - -(define %generate-part-toc% - #f) - -(define %generate-article-toc% - ;; Should a Table of Contents be produced for Articles? - ;; If true, a Table of Contents will be generated for each 'Article'. - #t) - -(define %generate-part-toc-on-titlepage% - ;; Should the Part TOC appear on the Part title page? - #f) - -;;Do you want a separate page for the title? -(define %generate-article-titlepage-on-separate-page% - #t) - -;;Do you want the article toc on the titlepage or separate? -(define %generate-article-toc-on-titlepage% - #f) - -;;Titlepage Separate? -;; This is the one that makes TOC only on first page!! hal. -(define (chunk-skip-first-element-list) - '()) - -(define %body-start-indent% - ;; Default indent of body text - 2pi) - -(define %para-indent-firstpara% - ;; First line start-indent for the first paragraph - 0pt) - -;; swa2 - -(define %para-indent% - ;; First line start-indent for paragraphs (other than the first) - 0pt) - -(define %block-start-indent% - ;; Extra start-indent for block-elements - 2pt) - -;;Define distance between paragraphs -(define %para-sep% - (/ %bf-size% 2.0)) - -;; with swa2 no effects - -;; swa3 - -;;Define distance between block elements (figures, tables, etc.). -(define %block-sep% - (* %para-sep% 1.0)) -;; (* %para-sep% 2.0)) - -(define %hyphenation% - ;; Allow automatic hyphenation? - #t) - -(define %left-margin% 5pi) -(define %right-margin% 5pi) -(define %top-margin% 5pi) -(define %bottom-margin% 5pi) -(define %footer-margin% 2pi) -(define %header-margin% 2pi) - -(define %line-spacing-factor% 1.3) - ;; Factor used to calculate leading - ;; The leading is calculated by multiplying the current font size by the - ;; '%line-spacing-factor%'. For example, if the font size is 10pt and - ;; the '%line-spacing-factor%' is 1.1, then the text will be - ;; printed "10-on-11". - -(define %head-before-factor% - ;; Factor used to calculate space above a title - ;; The space before a title is calculated by multiplying the font size - ;; used in the title by the '%head-before-factor%'. -;; 0.75) - 0.5) - -(define %head-after-factor% - ;; Factor used to calculate space below a title - ;; The space after a title is calculated by multiplying the font size used - ;; in the title by the '%head-after-factor%'. - 0.5) - -(define %input-whitespace-treatment% 'collapse) - -(define ($generate-article-lot-list$) - ;; Which Lists of Titles should be produced for Articles? - (list )) - - -</style-specification-body> -</style-specification> - - - - -<style-specification id="html" use="docbook"> -<style-specification-body> - -;; this is necessary because right now jadetex does not understand -;; symbolic entities, whereas things work well with numeric entities. -(declare-characteristic preserve-sdata? - "UNREGISTERED::James Clark//Characteristic::preserve-sdata?" - #f) - -;; put the legal notice in a separate file -(define %generate-legalnotice-link% - #t) - -;; use graphics in admonitions, and have their path be "stylesheet-images" -;; NO: they do not yet look very good -(define %admon-graphics-path% - "./stylesheet-images/") - -(define %admon-graphics% - #f) - -(define %funcsynopsis-decoration% - ;; make funcsynopsis look pretty - #t) - -(define %html-ext% - ".html") - -(define %generate-article-toc% - ;; Should a Table of Contents be produced for Articles? - ;; If true, a Table of Contents will be generated for each 'Article'. - #t) - -;; HB added next three statements 05/03/02. -;;Do you want a separate page for the title? -(define %generate-article-titlepage-on-separate-page% - #t) - -;;Do you want the article toc on the titlepage or separate? -(define %generate-article-toc-on-titlepage% - #t) - -;;Titlepage Separate? -;; This is the one that makes TOC only on first page!! hal. -(define (chunk-skip-first-element-list) - '()) - -(define %root-filename% - ;; The filename of the root HTML document (e.g, "index"). - "index") - -(define %generate-part-toc% - #t) - -(define %shade-verbatim% - #t) - -(define %use-id-as-filename% - ;; Use ID attributes as name for component HTML files? - #t) - -(define %graphic-default-extension% - "gif") - -(define %section-autolabel% #t) - ;; For enumerated sections (1.1, 1.1.1, 1.2, etc.) - -;; HB changed TOC depth to 3 levels. -(define (toc-depth nd) - 3) - -;; HB added 03/20/02, see dbparam.dsl ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -(define %body-attr% - ;; REFENTRY body-attr - ;; PURP What attributes should be hung off of BODY? - ;; DESC - ;; A list of the the BODY attributes that should be generated. - ;; The format is a list of lists, each interior list contains the - ;; name and value of a BODY attribute. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - (list - (list "BGCOLOR" "#EEEEEE") - (list "TEXT" "#000000") - (list "LINK" "#0000FF") - (list "VLINK" "#840084") - (list "ALINK" "#0000FF"))) - -(define %stylesheet% - ;; REFENTRY stylesheet - ;; PURP Name of the stylesheet to use - ;; DESC - ;; The name of the stylesheet to place in the HTML LINK TAG, or '#f' to - ;; suppress the stylesheet LINK. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - "../p_doc.css") - -(define %stylesheet-type% - ;; REFENTRY stylesheet-type - ;; PURP The type of the stylesheet to use - ;; DESC - ;; The type of the stylesheet to place in the HTML LINK TAG. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - "text/css") - -(define %css-liststyle-alist% - ;; REFENTRY css-liststyle-alist - ;; PURP Map DocBook OVERRIDE and MARK attributes to CSS - ;; DESC - ;; If '%css-decoration%' is turned on then the list-style-type property of - ;; list items will be set to reflect the list item style selected in the - ;; DocBook instance. This associative list maps the style type names used - ;; in your instance to the appropriate CSS names. If no mapping exists, - ;; the name from the instance will be used. - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - '(("bullet" "disc") - ("box" "square"))) - -(define %css-decoration% - ;; REFENTRY css-decoration - ;; PURP Enable CSS decoration of elements - ;; DESC - ;; If '%css-decoration%' is turned on then HTML elements produced by the - ;; stylesheet may be decorated with STYLE attributes. For example, the - ;; LI tags produced for list items may include a fragment of CSS in the - ;; STYLE attribute which sets the CSS property "list-style-type". - ;; /DESC - ;; AUTHOR N/A - ;; /REFENTRY - #t) - -;; HB added 2008-01-19 -(define %html-header-tags% - '(("META" ("HTTP-EQUIV" "Content-Type") ("CONTENT" "text/html; -charset=ISO-8859-1")))) - -</style-specification-body> -</style-specification> - - -<style-specification id="html-notoc" use="html"> -<style-specification-body> - -;; =================================================== -;; Vairant without TOC for the Homepage --oes 24/05/02 -;; =================================================== - -(define %generate-article-toc% - ;; Should a Table of Contents be produced for Articles? - ;; If true, a Table of Contents will be generated for each 'Article'. - #f) - -</style-specification-body> -</style-specification> - -<external-specification id="docbook" document="docbook.dsl"> - -</style-sheet> diff --git a/external/privoxy/doc/source/license.sgml b/external/privoxy/doc/source/license.sgml deleted file mode 100644 index b674770..0000000 --- a/external/privoxy/doc/source/license.sgml +++ /dev/null @@ -1,50 +0,0 @@ - - -<para> - <application>Privoxy</application> is free software; you can - redistribute it and/or modify it under the terms of the - <citetitle>GNU General Public License</citetitle>, version 2, - as published by the Free Software Foundation. -</para> - -<para> - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the <ulink - url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html"> - <citetitle>GNU General Public License</citetitle></ulink> for details. -</para> - -<para> - You should have received a copy of the <citetitle>GNU GPL</citetitle> - along with this program; if not, write to the <address> Free Software - Foundation, Inc. <street>51 Franklin Street, Fifth Floor</street> - <city>Boston</city>, <state>MA</state> <postcode>02110-1301</postcode> - <country>USA</country> </address> -</para> - diff --git a/external/privoxy/doc/source/newfeatures.sgml b/external/privoxy/doc/source/newfeatures.sgml deleted file mode 100644 index b1db531..0000000 --- a/external/privoxy/doc/source/newfeatures.sgml +++ /dev/null @@ -1,156 +0,0 @@ - -<para> - <itemizedlist> - - - <listitem> - <para> - Can keep outgoing connections alive and reuse them later on. - </para> - </listitem> - - <listitem> - <para> - Supports tagging which allows to change the behaviour - based on client and server headers. - </para> - </listitem> - - <listitem> - <para> - Can be run as an "intercepting" proxy, which obviates the need to - configure browsers individually. - </para> - </listitem> - - <listitem> - <para> - Sophisticated actions and filters for manipulating both server and client - headers. - </para> - </listitem> - - <listitem> - <para> - Can be chained with other proxies. - </para> - </listitem> - - <listitem> - <para> - Integrated browser based configuration and control utility at <ulink - url="http://config.privoxy.org/">http://config.privoxy.org/</ulink> - (shortcut: <ulink url="http://p.p/">http://p.p/</ulink>). Browser-based - tracing of rule and filter effects. Remote toggling. - </para> - </listitem> - - <listitem> - <para> - Web page filtering (text replacements, removes banners based on size, - invisible <quote>web-bugs</quote>, JavaScript and HTML annoyances, - pop-up windows, etc.) - </para> - </listitem> - - <listitem> - <para> - Modularized configuration that allows for standard settings and - user settings to reside in separate files, so that installing updated - actions files won't overwrite individual user settings. - </para> - </listitem> - - <listitem> - <para> - Support for Perl Compatible Regular Expressions in the configuration files, and - a more sophisticated and flexible configuration syntax. - </para> - </listitem> - - <listitem> - <para> - Improved cookie management features (e.g. session based cookies). - </para> -</listitem> - - <listitem> - <para> - GIF de-animation. - </para> - </listitem> - - <listitem> - <para> - Bypass many click-tracking scripts (avoids script redirection). - </para> - </listitem> - - <listitem> - <para> - Multi-threaded (POSIX and native threads). - </para> - </listitem> - - <listitem> - <para> - User-customizable HTML templates for most proxy-generated pages (e.g. "blocked" page). - </para> - </listitem> - - <listitem> - <para> - Auto-detection and re-reading of config file changes. - </para> - </listitem> - - <listitem> - <para> - Improved signal handling, and a true daemon mode (Unix). - </para> -</listitem> - - <listitem> - <para> - Every feature now controllable on a per-site or per-location basis, configuration - more powerful and versatile over-all. - </para> -</listitem> - - <listitem> - <para> - Many smaller new features added, limitations and bugs removed. - </para> -</listitem> - - </itemizedlist> -</para> diff --git a/external/privoxy/doc/source/p-authors.sgml b/external/privoxy/doc/source/p-authors.sgml deleted file mode 100644 index b8eb1ca..0000000 --- a/external/privoxy/doc/source/p-authors.sgml +++ /dev/null @@ -1,159 +0,0 @@ - -<![%p-authors-formal;[ -<para> -Current Privoxy Team: -</para> -]]> - -<literallayout> - Fabian Keil, lead developer - David Schmidt, developer -<![%p-authors-formal;[ -]]> - - Hal Burgiss - Mark Miller - Gerry Murphy - Lee Rian - Roland Rosenfeld - Jörg Strohmayer -<![%p-authors-formal;[ -</literallayout> - -<para> - Former Privoxy Team Members: -</para> - -<literallayout> - Johny Agotnes - Rodrigo Barbosa - Moritz Barsnick - Ian Cummings - Brian Dessent - Jon Foster - Karsten Hopp - Alexander Lazic - Daniel Leite - Gábor Lipták - Adam Lock - Guy Laroche - Justin McMurtry - Andreas Oesterhelt - Haroon Rafique - Georg Sauthoff - Thomas Steudten - Rodney Stromlund - Sviatoslav Sviridov - Sarantis Paskalis - Stefan Waldherr -]]> -</literallayout> -<![%p-authors-formal;[ -<para> - Thanks to the many people who have tested Privoxy, reported bugs, provided - patches, made suggestions or contributed in some way. These include (in - alphabetical order): -</para> -<literallayout> - Ken Arromdee - Devin Bayer - Gergely Bor - Reiner Buehl - Andrew J. Caines - Clifford Caoile - Frédéric Crozat - Michael T. Davis - Mattes Dolak - Matthias Drochner - Peter E. - Florian Effenberger - Markus Elfring - Dean Gaudet - Stephen Gildea - Daniel Griscom - Felix Gröbert - Aaron Hamid - Darel Henman - Magnus Holmgren - Eric M. Hopper - Ralf Horstmann - Stefan Huehner - Peter Hyman - Derek Jennings - Petr Kadlec - David Laight - Bert van Leeuwen - Don Libes - Paul Lieverse - Toby Lyward - Wil Mahan - Jindrich Makovicka - David Mediavilla - Raphael Moll - Amuro Namie - Adam Piggott - Dan Price - Roberto Ragusa - Félix Rauch - Maynard Riley - Chung-chieh Shan - Spinor S. - Bart Schelstraete - Oliver Stoeneberg - Peter Thoenen - Martin Thomas - Bobby G. Vinyard - Jochen Voss - Glenn Washburn - Song Weijia - Jörg Weinmann - Darren Wiebe - Anduin Withers - Oliver Yeoh - Jamie Zawinski -</literallayout> - -<para> - Privoxy is based in part on code originally developed by - Junkbusters Corp. and Anonymous Coders. -</para> - -<para> - Privoxy heavily relies on Philip Hazel's PCRE. -</para> - -<para> - The code to filter compressed content makes use of zlib - which is written by Jean-loup Gailly and Mark Adler. -</para> - -<para> - On systems that lack snprintf(), Privoxy is using a version - written by Mark Martinec. On systems that lack strptime(), - Privoxy is using the one from the GNU C Library written - by Ulrich Drepper. -</para> -]]> diff --git a/external/privoxy/doc/source/p-config.sgml b/external/privoxy/doc/source/p-config.sgml deleted file mode 100644 index 3b59fbf..0000000 --- a/external/privoxy/doc/source/p-config.sgml +++ /dev/null @@ -1,2756 +0,0 @@ - - -<![%user-man;[ - -<sect1 id="config"> -<title>The Main Configuration File</title> - -<para> - Again, the main configuration file is named <filename>config</filename> on - Linux/Unix/BSD and OS/2, and <filename>config.txt</filename> on Windows. - Configuration lines consist of an initial keyword followed by a list of - values, all separated by whitespace (any number of spaces or tabs). For - example: -</para> - -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>confdir /etc/privoxy</emphasis></literallayout> - </msgtext> - </literal> -</para> - -<para> - Assigns the value <literal>/etc/privoxy</literal> to the option - <literal>confdir</literal> and thus indicates that the configuration - directory is named <quote>/etc/privoxy/</quote>. -</para> - -<para> - All options in the config file except for <literal>confdir</literal> and - <literal>logdir</literal> are optional. Watch out in the below description - for what happens if you leave them unset. -</para> - -<para> - The main config file controls all aspects of <application>Privoxy</application>'s - operation that are not location dependent (i.e. they apply universally, no matter - where you may be surfing). -</para> - -]]> - - -<![%config-file;[ - -<sect1 id="config"> -<title> - @@TITLE@@ - Sample Configuration File for Privoxy v&p-version; -</title> -<para> - $Id: p-config.sgml,v 2.41 2009/02/19 16:59:41 fabiankeil Exp $ -</para> -<para> -Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/ -</para> - -<para> - <literallayout> -################################################################# - # - Table of Contents # - # - I. INTRODUCTION # - II. FORMAT OF THE CONFIGURATION FILE # - # - 1. LOCAL SET-UP DOCUMENTATION # - 2. CONFIGURATION AND LOG FILE LOCATIONS # - 3. DEBUGGING # - 4. ACCESS CONTROL AND SECURITY # - 5. FORWARDING # - 6. WINDOWS GUI OPTIONS # - # -################################################################# - </literallayout> -</para> - -<literallayout>I. INTRODUCTION - =============== </literallayout> - -<para> - This file holds Privoxy's main configuration. Privoxy detects - configuration changes automatically, so you don't have to restart it - unless you want to load a different configuration file. -</para> -<para> - The configuration will be reloaded with the first request after the - change was done, this request itself will still use the old configuration, - though. In other words: it takes two requests before you see the result of - your changes. Requests that are dropped due to ACL don't trigger reloads. -</para> -<para> - When starting Privoxy on Unix systems, give the location of this - file as last argument. On Windows systems, Privoxy will look for - this file with the name 'config.txt' in the current working directory - of the Privoxy process. -</para> - -<para> - <literallayout> - -II. FORMAT OF THE CONFIGURATION FILE -====================================</literallayout> -</para> -<para> - Configuration lines consist of an initial keyword followed by a list - of values, all separated by whitespace (any number of spaces or - tabs). For example, -</para> -<para> - actionsfile default.action -</para> -<para> - Indicates that the actionsfile is named 'default.action'. -</para> -<para> - The '#' indicates a comment. Any part of a line following a '#' is - ignored, except if the '#' is preceded by a '\'. -</para> -<para> - Thus, by placing a # at the start of an existing configuration line, - you can make it a comment and it will be treated as if it weren't there. - This is called "commenting out" an option and can be useful. Removing - the # again is called "uncommenting". -</para> -<para> - Note that commenting out an option and leaving it at its default - are two completely different things! Most options behave very - differently when unset. See the "Effect if unset" explanation - in each option's description for details. -</para> -<para> - Long lines can be continued on the next line by using a `\' as - the last character. -</para> - -]]> - - - - - - - - -<sect2 id="local-set-up"> -<title>Local Set-up Documentation</title> - - <para> - If you intend to operate <application>Privoxy</application> for more users - than just yourself, it might be a good idea to let them know how to reach - you, what you block and why you do that, your policies, etc. - </para> - - - -<sect3 renderas="sect4" id="user-manual"><title>user-manual</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Location of the <application>Privoxy</application> User Manual. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>A fully qualified URI</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - <ulink url="http://www.privoxy.org/user-manual/">http://www.privoxy.org/<replaceable class="parameter">version</replaceable>/user-manual/</ulink> - will be used, where <replaceable class="parameter">version</replaceable> is the <application>Privoxy</application> version. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The User Manual URI is the single best source of information on - <application>Privoxy</application>, and is used for help links from some - of the internal CGI pages. The manual itself is normally packaged with the - binary distributions, so you probably want to set this to a locally - installed copy. - </para> - <para> - Examples: - </para> -  - <para> - The best all purpose solution is simply to put the full local - <literal>PATH</literal> to where the <citetitle>User Manual</citetitle> is - located: - </para> - <para> - <screen>  user-manual  /usr/share/doc/privoxy/user-manual</screen> - </para> - <para> - The User Manual is then available to anyone with access to - <application>Privoxy</application>, by following the built-in URL: - <literal>http://config.privoxy.org/user-manual/</literal> - (or the shortcut: <literal>http://p.p/user-manual/</literal>). - </para> - <para> - If the documentation is not on the local system, it can be accessed - from a remote server, as: - </para> - <para> - <screen>  user-manual  http://example.com/privoxy/user-manual/</screen> - </para> - <![%user-man;[ -  - <warning> - <para> - If set, this option should be <emphasis>the first option in the config - file</emphasis>, because it is used while the config file is being read - on start-up. - </para> - </warning> - ]]> - - <![%config-file;[ -  - <para> - WARNING!!! - </para> - <blockquote> - <para> - If set, this option should be the first option in the config - file, because it is used while the config file is being read. - </para> - </blockquote> - ]]> - - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#user-manual http://www.privoxy.org/user-manual/</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="trust-info-url"><title>trust-info-url</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - A URL to be displayed in the error page that users will see if access to an untrusted page is denied. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>URL</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - No links are displayed on the "untrusted" error page. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The value of this option only matters if the experimental trust mechanism has been - activated. (See <link linkend="trustfile"><emphasis>trustfile</emphasis></link> below.) - </para> - <para> - If you use the trust mechanism, it is a good idea to write up some on-line - documentation about your trust policy and to specify the URL(s) here. - Use multiple times for multiple URLs. - </para> - <para> - The URL(s) should be added to the trustfile as well, so users don't end up - locked out from the information on why they were locked out in the first place! - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#trust-info-url http://www.example.com/why_we_block.html</literallayout>]]> -<![%config-file;[<literallayout>@@#trust-info-url http://www.example.com/what_we_allow.html</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="admin-address"><title>admin-address</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - An email address to reach the <application>Privoxy</application> administrator. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Email address</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - No email address is displayed on error pages and the CGI user interface. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - If both <literal>admin-address</literal> and <literal>proxy-info-url</literal> - are unset, the whole "Local Privoxy Support" box on all generated pages will - not be shown. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#admin-address privoxy-admin(a)example.com</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="proxy-info-url"><title>proxy-info-url</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - A URL to documentation about the local <application>Privoxy</application> setup, - configuration or policies. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>URL</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - No link to local documentation is displayed on error pages and the CGI user interface. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - If both <literal>admin-address</literal> and <literal>proxy-info-url</literal> - are unset, the whole "Local Privoxy Support" box on all generated pages will - not be shown. - </para> - <para> - This URL shouldn't be blocked ;-) - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#proxy-info-url http://www.example.com/proxy-service.html</literallayout>]]> -</sect3> - -</sect2> - - - - - - -<sect2 id="conf-log-loc"> -<title>Configuration and Log File Locations</title> - -<para> - <application>Privoxy</application> can (and normally does) use a number of - other files for additional configuration, help and logging. - This section of the configuration file tells <application>Privoxy</application> - where to find those other files. -</para> - -<para> - The user running <application>Privoxy</application>, must have read - permission for all configuration files, and write permission to any files - that would be modified, such as log files and actions files. -</para> - - - -<sect3 renderas="sect4" id="confdir"><title>confdir</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para>The directory where the other configuration files are located.</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Path name</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>/etc/privoxy (Unix) <emphasis>or</emphasis> <application>Privoxy</application> installation dir (Windows) </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para><emphasis>Mandatory</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - No trailing <quote><literal>/</literal></quote>, please. - </para> -  - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@confdir .</literallayout>]]> -</sect3> - - -<sect3 renderas="sect4" id="templdir"><title>templdir</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para>An alternative directory where the templates are loaded from.</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Path name</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>unset</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para>The templates are assumed to be located in confdir/template.</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - <application>Privoxy's</application> original templates are usually - overwritten with each update. Use this option to relocate customized - templates that should be kept. As template variables might change - between updates, you shouldn't expect templates to work with - <application>Privoxy</application> releases other than the one - they were part of, though. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#templdir .</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="logdir"><title>logdir</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - The directory where all logging takes place - (i.e. where the <filename>logfile</filename> is located). - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Path name</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>/var/log/privoxy (Unix) <emphasis>or</emphasis> <application>Privoxy</application> installation dir (Windows) </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para><emphasis>Mandatory</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - No trailing <quote><literal>/</literal></quote>, please. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@logdir .</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="actionsfile"><title> -actionsfile -</title> -<anchor id="default.action"> -<anchor id="standard.action"> -<anchor id="user.action"> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - The <link linkend="actions-file">actions file(s)</link> to use - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Complete file name, relative to <literal>confdir</literal></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default values:</term> - <listitem> - <simplelist> - <member> - <msgtext><literallayout> match-all.action # Actions that are applied to all sites and maybe overruled later on.</literallayout></msgtext> - </member> - <member> - <msgtext><literallayout> default.action # Main actions file</literallayout></msgtext> - </member> - <member> - <msgtext><literallayout> user.action # User customizations</literallayout></msgtext> - </member> - </simplelist> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - No actions are taken at all. More or less neutral proxying. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Multiple <literal>actionsfile</literal> lines are permitted, and are in fact recommended! - </para> - <para> - The default values are <filename>default.action</filename>, which is the - <quote>main</quote> actions file maintained by the developers, and - <filename>user.action</filename>, where you can make your personal additions. - </para> - <para> - Actions files contain all the per site and per URL configuration for - ad blocking, cookie management, privacy considerations, etc. - There is no point in using <application>Privoxy</application> without at - least one actions file. - </para> - <para> - Note that since Privoxy 3.0.7, the complete filename, including the <quote>.action</quote> - extension has to be specified. The syntax change was necessary to be consistent - with the other file options and to allow previously forbidden characters. - </para> - </listitem> - </varlistentry> -</variablelist> - - - -<![%config-file;[<literallayout>@@actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.</literallayout>]]> -<![%config-file;[<literallayout>@@actionsfile default.action # Main actions file</literallayout>]]> - -<![%config-file;[<literallayout>@@actionsfile user.action # User customizations</literallayout>]]> -</sect3> - - -<sect3 renderas="sect4" id="filterfile"><title>filterfile</title> -<anchor id="default.filter"> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - The <link linkend="filter-file">filter file(s)</link> to use - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>File name, relative to <literal>confdir</literal></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>default.filter (Unix) <emphasis>or</emphasis> default.filter.txt (Windows)</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - No textual content filtering takes place, i.e. all - <literal>+<link linkend="filter">filter</link>{<replaceable class="parameter">name</replaceable>}</literal> - actions in the actions files are turned neutral. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Multiple <literal>filterfile</literal> lines are permitted. - </para> - <para> - The <link linkend="filter-file">filter files</link> contain content modification - rules that use <link linkend="regex">regular expressions</link>. These rules permit - powerful changes on the content of Web pages, and optionally the headers - as well, e.g., you could try to disable your favorite JavaScript annoyances, - re-write the actual displayed text, or just have some fun - playing buzzword bingo with web pages. - </para> - <para> - The - <literal>+<link linkend="filter">filter</link>{<replaceable class="parameter">name</replaceable>}</literal> - actions rely on the relevant filter (<replaceable class="parameter">name</replaceable>) - to be defined in a filter file! - </para> - <para> - A pre-defined filter file called <filename>default.filter</filename> that contains - a number of useful filters for common problems is included in the distribution. - See the section on the <literal><link linkend="filter">filter</link></literal> - action for a list. - </para> - <para> - It is recommended to place any locally adapted filters into a separate - file, such as <filename>user.filter</filename>. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@filterfile default.filter</literallayout>]]> -<![%config-file;[<literallayout>@@#filterfile user.filter # User customizations</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="logfile"><title>logfile</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - The log file to use - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>File name, relative to <literal>logdir</literal></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset (commented out)</emphasis>. When activated: logfile (Unix) <emphasis>or</emphasis> privoxy.log (Windows).</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - No logfile is written. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The logfile is where all logging and error messages are written. The level - of detail and number of messages are set with the <literal>debug</literal> - option (see below). The logfile can be useful for tracking down a problem with - <application>Privoxy</application> (e.g., it's not blocking an ad you - think it should block) and it can help you to monitor what your browser - is doing. - </para> - <para> - Depending on the debug options below, the logfile may be a privacy risk - if third parties can get access to it. As most users will never look - at it, <application>Privoxy</application> 3.0.7 and later only log fatal - errors by default. - </para> - <para> - For most troubleshooting purposes, you will have to change that, - please refer to the debugging section for details. - </para> - <para> - Your logfile will grow indefinitely, and you will probably want to - periodically remove it. On Unix systems, you can do this with a cron job - (see <quote>man cron</quote>). For Red Hat based Linux distributions, a - <command>logrotate</command> script has been included. - </para> - <para> - Any log files must be writable by whatever user <application>Privoxy</application> - is being run as (on Unix, default user id is <quote>privoxy</quote>). - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@logfile logfile</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="trustfile"><title>trustfile</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - The name of the trust file to use - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>File name, relative to <literal>confdir</literal></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset (commented out)</emphasis>. When activated: trust (Unix) <emphasis>or</emphasis> trust.txt (Windows)</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - The entire trust mechanism is disabled. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The trust mechanism is an experimental feature for building white-lists and should - be used with care. It is <emphasis>NOT</emphasis> recommended for the casual user. - </para> - <para> - If you specify a trust file, <application>Privoxy</application> will only allow - access to sites that are specified in the trustfile. Sites can be listed - in one of two ways: - </para> - <para> - Prepending a <literal>~</literal> character limits access to this site - only (and any sub-paths within this site), e.g. - <literal>~www.example.com</literal> allows access to - <literal>~www.example.com/features/news.html</literal>, etc. - </para> - <para> - Or, you can designate sites as <emphasis>trusted referrers</emphasis>, by - prepending the name with a <literal>+</literal> character. The effect is that - access to untrusted sites will be granted -- but only if a link from this - trusted referrer was used to get there. The link target will then be added - to the <quote>trustfile</quote> so that future, direct accesses will be - granted. Sites added via this mechanism do not become trusted referrers - themselves (i.e. they are added with a <literal>~</literal> designation). - There is a limit of 512 such entries, after which new entries will not be - made. - </para> - <para> - If you use the <literal>+</literal> operator in the trust file, it may grow - considerably over time. - </para> - <para> - It is recommended that <application>Privoxy</application> be compiled with - the <literal>--disable-force</literal>, <literal>--disable-toggle</literal> and - <literal> --disable-editor</literal> options, if this feature is to be - used. - </para> - <para> - Possible applications include limiting Internet access for children. - </para> - - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#trustfile trust</literallayout>]]> -</sect3> -</sect2> - - - - -<sect2 id="debugging"> -<title>Debugging</title> - - <para> - These options are mainly useful when tracing a problem. - Note that you might also want to invoke - <application>Privoxy</application> with the <literal>--no-daemon</literal> - command line option when debugging. - </para> - -<sect3 renderas="sect4" id="debug"><title>debug</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Key values that determine what information gets logged. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Integer values</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Default value is used (see above). - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The available debug levels are: - </para> - <para> - <programlisting> - debug 1 # Log the destination for each request &my-app; let through. See also debug 1024. - debug 2 # show each connection status - debug 4 # show I/O status - debug 8 # show header parsing - debug 16 # log all data written to the network into the logfile - debug 32 # debug force feature - debug 64 # debug regular expression filters - debug 128 # debug redirects - debug 256 # debug GIF de-animation - debug 512 # Common Log Format - debug 1024 # Log the destination for requests &my-app; didn't let through, and the reason why. - debug 2048 # CGI user interface - debug 4096 # Startup banner and warnings. - debug 8192 # Non-fatal errors -</programlisting> - </para> - <para> - To select multiple debug levels, you can either add them or use - multiple <literal>debug</literal> lines. - </para> - <para> - A debug level of 1 is informative because it will show you each request - as it happens. <emphasis>1, 4096 and 8192 are recommended</emphasis> - so that you will notice when things go wrong. The other levels are - probably only of interest if you are hunting down a specific problem. - They can produce a hell of an output (especially 16). -  - </para> - <para> - &my-app; used to ship with the debug levels recommended above enabled by - default, but due to privacy concerns 3.0.7 and later are configured to - only log fatal errors. - </para> - <para> - If you are used to the more verbose settings, simply enable the debug lines - below again. - </para> - <para> - If you want to use pure CLF (Common Log Format), you should set <quote>debug - 512</quote> <emphasis>ONLY</emphasis> and not enable anything else. - </para> - <para> - <application>Privoxy</application> has a hard-coded limit for the - length of log messages. If it's reached, messages are logged truncated - and marked with <quote>... [too long, truncated]</quote>. - </para> - <para> - Please don't file any support requests without trying to reproduce - the problem with increased debug level first. Once you read the log - messages, you may even be able to solve the problem on your own. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#debug 1 # Log the destination for each request &my-app; let through.</literallayout>]]> -<![%config-file;[<literallayout>@@#debug 1024 # Log the destination for requests &my-app; didn't let through, and the reason why.</literallayout>]]> -<![%config-file;[<literallayout>@@#debug 4096 # Startup banner and warnings</literallayout>]]> -<![%config-file;[<literallayout>@@#debug 8192 # Non-fatal errors</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="single-threaded"><title>single-threaded</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether to run only one server thread. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para><emphasis>None</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Multi-threaded (or, where unavailable: forked) operation, i.e. the ability to - serve multiple requests simultaneously. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This option is only there for debugging purposes. - <emphasis>It will drastically reduce performance.</emphasis> - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#single-threaded</literallayout>]]> -</sect3> - - -<sect3 renderas="sect4" id="hostname"><title>hostname</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - The hostname shown on the CGI pages. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Text</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - The hostname provided by the operating system is used. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - On some misconfigured systems resolving the hostname fails or - takes too much time and slows Privoxy down. Setting a fixed hostname - works around the problem. - </para> - <para> - In other circumstances it might be desirable to show a hostname - other than the one returned by the operating system. For example - if the system has several different hostnames and you don't want - to use the first one. - </para> - <para> - Note that Privoxy does not validate the specified hostname value. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@#hostname hostname.example.org</literallayout>]]> -</sect3> - -</sect2> - - - - - -<sect2 id="access-control"> -<title>Access Control and Security</title> - - <para> - This section of the config file controls the security-relevant aspects - of <application>Privoxy</application>'s configuration. - </para> - - - -<sect3 renderas="sect4" id="listen-address"><title>listen-address</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - The IP address and TCP port on which <application>Privoxy</application> will - listen for client requests. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>[<replaceable class="parameter">IP-Address</replaceable>]:<replaceable class="parameter">Port</replaceable></para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Default value:</term> - <listitem> - <para>127.0.0.1:8118</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Bind to 127.0.0.1 (localhost), port 8118. This is suitable and recommended for - home users who run <application>Privoxy</application> on the same machine as - their browser. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - You will need to configure your browser(s) to this proxy address and port. - </para> - <para> - If you already have another service running on port 8118, or if you want to - serve requests from other machines (e.g. on your local network) as well, you - will need to override the default. - </para> - <para> - If you leave out the IP address, <application>Privoxy</application> will - bind to all interfaces (addresses) on your machine and may become reachable - from the Internet. In that case, consider using <link - linkend="acls">access control lists</link> (ACL's, see below), and/or - a firewall. - </para> - <para> - If you open <application>Privoxy</application> to untrusted users, you will - also want to make sure that the following actions are disabled: <literal><link - linkend="enable-edit-actions">enable-edit-actions</link></literal> and - <literal><link linkend="enable-remote-toggle">enable-remote-toggle</link></literal> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Example:</term> - <listitem> - <para> - Suppose you are running <application>Privoxy</application> on - a machine which has the address 192.168.0.1 on your local private network - (192.168.0.0) and has another outside connection with a different address. - You want it to serve requests from inside only: - </para> - <para> - <programlisting> - listen-address 192.168.0.1:8118 -</programlisting> - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@listen-address 127.0.0.1:8118</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="toggle"><title>toggle</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Initial state of "toggle" status - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>1 or 0</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>1</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Act as if toggled on - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - If set to 0, <application>Privoxy</application> will start in - <quote>toggled off</quote> mode, i.e. mostly behave like a normal, - content-neutral proxy with both ad blocking and content filtering - disabled. See <literal>enable-remote-toggle</literal> below. - - </para> - <para> - The windows version will only display the toggle icon in the system tray - if this option is present. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@toggle 1</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="enable-remote-toggle"><title>enable-remote-toggle</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether or not the <ulink url="http://config.privoxy.org/toggle">web-based toggle - feature</ulink> may be used - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>0 or 1</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>0</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - The web-based toggle feature is disabled. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - When toggled off, <application>Privoxy</application> mostly acts like a normal, - content-neutral proxy, i.e. doesn't block ads or filter content. - </para> - <para> - Access to the toggle feature can <emphasis>not</emphasis> be - controlled separately by <quote>ACLs</quote> or HTTP authentication, - so that everybody who can access <application>Privoxy</application> (see - <quote>ACLs</quote> and <literal>listen-address</literal> above) can - toggle it for all users. So this option is <emphasis>not recommended</emphasis> - for multi-user environments with untrusted users. - </para> - <para> - Note that malicious client side code (e.g Java) is also - capable of using this option. - </para> - <para> - As a lot of <application>Privoxy</application> users don't read - documentation, this feature is disabled by default. - </para> - <para> - Note that you must have compiled <application>Privoxy</application> with - support for this feature, otherwise this option has no effect. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@enable-remote-toggle 0</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="enable-remote-http-toggle"><title>enable-remote-http-toggle</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether or not Privoxy recognizes special HTTP headers to change its behaviour. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>0 or 1</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>0</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Privoxy ignores special HTTP headers. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - When toggled on, the client can change <application>Privoxy's</application> - behaviour by setting special HTTP headers. Currently the only supported - special header is <quote>X-Filter: No</quote>, to disable filtering for - the ongoing request, even if it is enabled in one of the action files. - </para> - <para> - This feature is disabled by default. If you are using - <application>Privoxy</application> in a environment with trusted clients, - you may enable this feature at your discretion. Note that malicious client - side code (e.g Java) is also capable of using this feature. - </para> - <para> - This option will be removed in future releases as it has been obsoleted - by the more general header taggers. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@enable-remote-http-toggle 0</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="enable-edit-actions"><title>enable-edit-actions</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether or not the <ulink url="http://config.privoxy.org/show-status">web-based actions - file editor</ulink> may be used - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>0 or 1</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>0</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - The web-based actions file editor is disabled. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Access to the editor can <emphasis>not</emphasis> be - controlled separately by <quote>ACLs</quote> or HTTP authentication, - so that everybody who can access <application>Privoxy</application> (see - <quote>ACLs</quote> and <literal>listen-address</literal> above) can - modify its configuration for all users. - </para> - <para> - This option is <emphasis>not recommended</emphasis> for environments - with untrusted users and as a lot of <application>Privoxy</application> - users don't read documentation, this feature is disabled by default. - </para> - <para> - Note that malicious client side code (e.g Java) is also - capable of using the actions editor and you shouldn't enable - this options unless you understand the consequences and are - sure your browser is configured correctly. - </para> - <para> - Note that you must have compiled <application>Privoxy</application> with - support for this feature, otherwise this option has no effect. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@enable-edit-actions 0</literallayout>]]> -</sect3> - - -<sect3 renderas="sect4" id="enforce-blocks"><title>enforce-blocks</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether the user is allowed to ignore blocks and can <quote>go there anyway</quote>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable>0 or 1</replaceable> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>0</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Blocks are not enforced. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - <application>Privoxy</application> is mainly used to block and filter - requests as a service to the user, for example to block ads and other - junk that clogs the pipes. <application>Privoxy's</application> configuration - isn't perfect and sometimes innocent pages are blocked. In this situation it - makes sense to allow the user to enforce the request and have - <application>Privoxy</application> ignore the block. - </para> - <para> - In the default configuration <application>Privoxy's</application> - <quote>Blocked</quote> page contains a <quote>go there anyway</quote> - link to adds a special string (the force prefix) to the request URL. - If that link is used, <application>Privoxy</application> will - detect the force prefix, remove it again and let the request pass. - </para> - <para> - Of course <application>Privoxy</application> can also be used to enforce - a network policy. In that case the user obviously should not be able to - bypass any blocks, and that's what the <quote>enforce-blocks</quote> - option is for. If it's enabled, <application>Privoxy</application> hides - the <quote>go there anyway</quote> link. If the user adds the force - prefix by hand, it will not be accepted and the circumvention attempt - is logged. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - enforce-blocks 1 - </para> - </listitem> - </varlistentry> -</variablelist> -<![%config-file;[<literallayout>@@enforce-blocks 0</literallayout>]]> -</sect3> - - - -<sect3 renderas="sect4" id="acls"><title> -ACLs: permit-access and deny-access</title> -<anchor id="permit-access"> -<anchor id="deny-access"> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Who can access what. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable class="parameter">src_addr</replaceable>[/<replaceable class="parameter">src_masklen</replaceable>] - [<replaceable class="parameter">dst_addr</replaceable>[/<replaceable class="parameter">dst_masklen</replaceable>]] - </para> - <para> - Where <replaceable class="parameter">src_addr</replaceable> and - <replaceable class="parameter">dst_addr</replaceable> are IP addresses in dotted decimal notation or valid - DNS names, and <replaceable class="parameter">src_masklen</replaceable> and - <replaceable class="parameter">dst_masklen</replaceable> are subnet masks in CIDR notation, i.e. integer - values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole - destination part are optional. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Don't restrict access further than implied by <literal>listen-address</literal> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Access controls are included at the request of ISPs and systems - administrators, and <emphasis>are not usually needed by individual users</emphasis>. - For a typical home user, it will normally suffice to ensure that - <application>Privoxy</application> only listens on the localhost - (127.0.0.1) or internal (home) network address by means of the - <link linkend="listen-address"><emphasis>listen-address</emphasis></link> - option. - </para> - <para> - Please see the warnings in the FAQ that <application>Privoxy</application> - is not intended to be a substitute for a firewall or to encourage anyone - to defer addressing basic security weaknesses. - </para> - <para> - Multiple ACL lines are OK. - If any ACLs are specified, <application>Privoxy</application> only talks - to IP addresses that match at least one <literal>permit-access</literal> line - and don't match any subsequent <literal>deny-access</literal> line. In other words, the - last match wins, with the default being <literal>deny-access</literal>. - </para> - <para> - If <application>Privoxy</application> is using a forwarder (see <literal>forward</literal> below) - for a particular destination URL, the <replaceable class="parameter">dst_addr</replaceable> - that is examined is the address of the forwarder and <emphasis>NOT</emphasis> the address - of the ultimate target. This is necessary because it may be impossible for the local - <application>Privoxy</application> to determine the IP address of the - ultimate target (that's often what gateways are used for). - </para> - <para> - You should prefer using IP addresses over DNS names, because the address lookups take - time. All DNS names must resolve! You can <emphasis>not</emphasis> use domain patterns - like <quote>*.org</quote> or partial domain names. If a DNS name resolves to multiple - IP addresses, only the first one is used. - </para> - <para> - Denying access to particular sites by ACL may have undesired side effects - if the site in question is hosted on a machine which also hosts other sites - (most sites are). - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - Explicitly define the default behavior if no ACL and - <literal>listen-address</literal> are set: <quote>localhost</quote> - is OK. The absence of a <replaceable class="parameter">dst_addr</replaceable> implies that - <emphasis>all</emphasis> destination addresses are OK: - </para> - <para> - <screen> - permit-access localhost -</screen> - </para> - <para> - Allow any host on the same class C subnet as www.privoxy.org access to - nothing but www.example.com (or other domains hosted on the same system): - </para> - <para> - <screen> - permit-access www.privoxy.org/24 www.example.com/32 -</screen> - </para> - <para> - Allow access from any host on the 26-bit subnet 192.168.45.64 to anywhere, - with the exception that 192.168.45.73 may not access the IP address behind - www.dirty-stuff.example.com: - </para> - <para> - <screen> - permit-access 192.168.45.64/26 - deny-access 192.168.45.73 www.dirty-stuff.example.com -</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="buffer-limit"><title>buffer-limit</title> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Maximum size of the buffer for content filtering. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para>Size in Kbytes</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>4096</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Use a 4MB (4096 KB) limit. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - For content filtering, i.e. the <literal>+filter</literal> and - <literal>+deanimate-gif</literal> actions, it is necessary that - <application>Privoxy</application> buffers the entire document body. - This can be potentially dangerous, since a server could just keep sending - data indefinitely and wait for your RAM to exhaust -- with nasty consequences. - Hence this option. - </para> - <para> - When a document buffer size reaches the <literal>buffer-limit</literal>, it is - flushed to the client unfiltered and no further attempt to - filter the rest of the document is made. Remember that there may be multiple threads - running, which might require up to <literal>buffer-limit</literal> Kbytes - <emphasis>each</emphasis>, unless you have enabled <quote>single-threaded</quote> - above. - </para> - </listitem> - </varlistentry> -</variablelist> - -<![%config-file;[<literallayout>@@buffer-limit 4096</literallayout>]]> -</sect3> - -</sect2> - - - - - - -<sect2 id="forwarding"> -<title>Forwarding</title> - -<para> - This feature allows routing of HTTP requests through a chain of - multiple proxies. -</para> -<para> - Forwarding can be used to chain Privoxy with a caching proxy to speed - up browsing. Using a parent proxy may also be necessary if the machine - that <application>Privoxy</application> runs on has no direct Internet access. -</para> -<para> - Note that parent proxies can severely decrease your privacy level. - For example a parent proxy could add your IP address to the request - headers and if it's a caching proxy it may add the <quote>Etag</quote> - header to revalidation requests again, even though you configured Privoxy - to remove it. It may also ignore Privoxy's header time randomization and use the - original values which could be used by the server as cookie replacement - to track your steps between visits. -</para> - -<para> - Also specified here are SOCKS proxies. <application>Privoxy</application> - supports the SOCKS 4 and SOCKS 4A protocols. -</para> - -<sect3 renderas="sect4" id="forward"><title>forward</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - To which parent HTTP proxy specific requests should be routed. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable class="parameter">target_pattern</replaceable> - <replaceable class="parameter">http_parent</replaceable>[:<replaceable class="parameter">port</replaceable>] - </para> - <para> - where <replaceable class="parameter">target_pattern</replaceable> is a <link linkend="af-patterns">URL pattern</link> - that specifies to which requests (i.e. URLs) this forward rule shall apply. Use <literal>/</literal> to - denote <quote>all URLs</quote>. - <replaceable class="parameter">http_parent</replaceable>[:<replaceable class="parameter">port</replaceable>] - is the DNS name or IP address of the parent HTTP proxy through which the requests should be forwarded, - optionally followed by its listening port (default: 8080). - Use a single dot (<literal>.</literal>) to denote <quote>no forwarding</quote>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Don't use parent HTTP proxies. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - If <replaceable class="parameter">http_parent</replaceable> is <quote>.</quote>, then requests are not - forwarded to another HTTP proxy but are made directly to the web servers. - </para> - <para> - Multiple lines are OK, they are checked in sequence, and the last match wins. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - Everything goes to an example parent proxy, except SSL on port 443 (which it doesn't handle): - </para> - <para> - <screen> - forward / parent-proxy.example.org:8080 - forward :443 . -</screen> - </para> - <para> - Everything goes to our example ISP's caching proxy, except for requests - to that ISP's sites: - </para> - <para> - <screen> - forward / caching-proxy.isp.example.net:8000 - forward .isp.example.net . -</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="socks"><title> -forward-socks4, forward-socks4a and forward-socks5</title> -<anchor id="forward-socks4"> -<anchor id="forward-socks4a"> - -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Through which SOCKS proxy (and optionally to which parent HTTP proxy) specific requests should be routed. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable class="parameter">target_pattern</replaceable> - <replaceable class="parameter">socks_proxy</replaceable>[:<replaceable class="parameter">port</replaceable>] - <replaceable class="parameter">http_parent</replaceable>[:<replaceable class="parameter">port</replaceable>] - </para> - <para> - where <replaceable class="parameter">target_pattern</replaceable> is a - <link linkend="af-patterns">URL pattern</link> that specifies to which - requests (i.e. URLs) this forward rule shall apply. Use <literal>/</literal> to - denote <quote>all URLs</quote>. <replaceable class="parameter">http_parent</replaceable> - and <replaceable class="parameter">socks_proxy</replaceable> - are IP addresses in dotted decimal notation or valid DNS names - (<replaceable class="parameter">http_parent</replaceable> - may be <quote>.</quote> to denote <quote>no HTTP forwarding</quote>), and the optional - <replaceable class="parameter">port</replaceable> parameters are TCP ports, - i.e. integer values from 1 to 65535 - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>Unset</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Don't use SOCKS proxies. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Multiple lines are OK, they are checked in sequence, and the last match wins. - </para> - <para> - The difference between <literal>forward-socks4</literal> and <literal>forward-socks4a</literal> - is that in the SOCKS 4A protocol, the DNS resolution of the target hostname happens on the SOCKS - server, while in SOCKS 4 it happens locally. - </para> - <para> - With <literal>forward-socks5</literal> the DNS resolution will happen on the remote server as well. - </para> - <para> - If <replaceable class="parameter">http_parent</replaceable> is <quote>.</quote>, then requests are not - forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through - a SOCKS proxy. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - From the company example.com, direct connections are made to all - <quote>internal</quote> domains, but everything outbound goes through - their ISP's proxy by way of example.com's corporate SOCKS 4A gateway to - the Internet. - </para> - <para> - <screen> - forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 - forward .example.com . -</screen> - </para> - <para> - A rule that uses a SOCKS 4 gateway for all destinations but no HTTP parent looks like this: - </para> - <para> - <screen> - forward-socks4 / socks-gw.example.com:1080 . -</screen> - </para> - - <para> - To chain Privoxy and Tor, both running on the same system, you would use - something like: - </para> - <para> - <screen> - forward-socks4a / 127.0.0.1:9050 . -</screen> - </para> - - <para> - The public <application>Tor</application> network can't be used to - reach your local network, if you need to access local servers you - therefore might want to make some exceptions: - </para> - <para> - <screen> - forward 192.168.*.*/ . - forward 10.*.*.*/ . - forward 127.*.*.*/ . -</screen> - </para> - <para> - Unencrypted connections to systems in these address ranges will - be as (un)secure as the local network is, but the alternative is that you - can't reach the local network through <application>Privoxy</application> - at all. Of course this may actually be desired and there is no reason - to make these exceptions if you aren't sure you need them. - </para> - <para> - If you also want to be able to reach servers in your local network by - using their names, you will need additional exceptions that look like - this: - </para> - <para> - <screen> - forward localhost/ . -</screen> - </para> - - </listitem> - </varlistentry> -</variablelist> -</sect3> - -<![%user-man;[  - -<sect3 renderas="sect4" id="advanced-forwarding-examples"><title>Advanced Forwarding Examples</title> - -<para> - If you have links to multiple ISPs that provide various special content - only to their subscribers, you can configure multiple <application>Privoxies</application> - which have connections to the respective ISPs to act as forwarders to each other, so that - <emphasis>your</emphasis> users can see the internal content of all ISPs. -</para> - -<para> - Assume that host-a has a PPP connection to isp-a.example.net. And host-b has a PPP connection to - isp-b.example.org. Both run <application>Privoxy</application>. Their forwarding - configuration can look like this: -</para> - -<para> - host-a: -</para> - -<para> - <screen> - forward / . - forward .isp-b.example.net host-b:8118 -</screen> -</para> - -<para> - host-b: -</para> - -<para> - <screen> - forward / . - forward .isp-a.example.org host-a:8118 -</screen> -</para> - -<para> - Now, your users can set their browser's proxy to use either - host-a or host-b and be able to browse the internal content - of both isp-a and isp-b. -</para> - -<para> - If you intend to chain <application>Privoxy</application> and - <application>squid</application> locally, then chaining as - <literal>browser -> squid -> privoxy</literal> is the recommended way. -</para> - -<para> - Assuming that <application>Privoxy</application> and <application>squid</application> - run on the same box, your <application>squid</application> configuration could then look like this: -</para> - -<para> - <screen> - # Define Privoxy as parent proxy (without ICP) - cache_peer 127.0.0.1 parent 8118 7 no-query - - # Define ACL for protocol FTP - acl ftp proto FTP - - # Do not forward FTP requests to Privoxy - always_direct allow ftp - - # Forward all the rest to Privoxy - never_direct allow all</screen> -</para> - -<para> - You would then need to change your browser's proxy settings to <application>squid</application>'s address and port. - Squid normally uses port 3128. If unsure consult <literal>http_port</literal> in <filename>squid.conf</filename>. -</para> - -<para> - You could just as well decide to only forward requests you suspect - of leading to Windows executables through a virus-scanning parent proxy, - say, on <literal>antivir.example.com</literal>, port 8010: -</para> - -<para> - <screen> - forward / . - forward /.*\.(exe|com|dll|zip)$ antivir.example.com:8010</screen> -</para> - -</sect3> -]]> - -<sect3 renderas="sect4" id="forwarded-connect-retries"><title>forwarded-connect-retries</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - How often Privoxy retries if a forwarded connection request fails. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable class="parameter">Number of retries.</replaceable> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>0</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Connections forwarded through other proxies are treated like direct connections and no retry attempts are made. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - <replaceable class="parameter">forwarded-connect-retries</replaceable> is mainly interesting - for socks4a connections, where <application>Privoxy</application> can't detect why the connections failed. - The connection might have failed because of a DNS timeout in which case a retry makes sense, - but it might also have failed because the server doesn't exist or isn't reachable. In this - case the retry will just delay the appearance of Privoxy's error message. - </para> - <para> - Note that in the context of this option, <quote>forwarded connections</quote> includes all connections - that Privoxy forwards through other proxies. This option is not limited to the HTTP CONNECT method. - </para> - <para> - Only use this option, if you are getting lots of forwarding-related error messages - that go away when you try again manually. Start with a small value and check Privoxy's - logfile from time to time, to see how many retries are usually needed. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - forwarded-connect-retries 1 - </para> - </listitem> - </varlistentry> -</variablelist> -<![%config-file;[<literallayout>@@forwarded-connect-retries 0</literallayout>]]> -</sect3> - -<sect3 renderas="sect4" id="accept-intercepted-requests"><title>accept-intercepted-requests</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether intercepted requests should be treated as valid. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable>0 or 1</replaceable> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>0</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Only proxy requests are accepted, intercepted requests are treated as invalid. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - If you don't trust your clients and want to force them - to use <application>Privoxy</application>, enable this - option and configure your packet filter to redirect outgoing - HTTP connections into <application>Privoxy</application>. - </para> - <para> - Make sure that <application>Privoxy's</application> own requests - aren't redirected as well. Additionally take care that - <application>Privoxy</application> can't intentionally connect - to itself, otherwise you could run into redirection loops if - <application>Privoxy's</application> listening port is reachable - by the outside or an attacker has access to the pages you visit. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - accept-intercepted-requests 1 - </para> - </listitem> - </varlistentry> -</variablelist> -<![%config-file;[<literallayout>@@accept-intercepted-requests 0</literallayout>]]> -</sect3> - -<sect3 renderas="sect4" id="allow-cgi-request-crunching"><title>allow-cgi-request-crunching</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether requests to <application>Privoxy's</application> CGI pages can be blocked or redirected. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable>0 or 1</replaceable> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>0</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - <application>Privoxy</application> ignores block and redirect actions for its CGI pages. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - By default <application>Privoxy</application> ignores block or redirect actions - for its CGI pages. Intercepting these requests can be useful in multi-user - setups to implement fine-grained access control, but it can also render the complete - web interface useless and make debugging problems painful if done without care. - </para> - <para> - Don't enable this option unless you're sure that you really need it. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - allow-cgi-request-crunching 1 - </para> - </listitem> - </varlistentry> -</variablelist> -<![%config-file;[<literallayout>@@allow-cgi-request-crunching 0</literallayout>]]> -</sect3> - -<sect3 renderas="sect4" id="split-large-forms"><title>split-large-forms</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Whether the CGI interface should stay compatible with broken HTTP clients. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable>0 or 1</replaceable> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para><emphasis>0</emphasis></para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - The CGI form generate long GET URLs. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - <application>Privoxy's</application> CGI forms can lead to - rather long URLs. This isn't a problem as far as the HTTP - standard is concerned, but it can confuse clients with arbitrary - URL length limitations. - </para> - <para> - Enabling split-large-forms causes <application>Privoxy</application> - to divide big forms into smaller ones to keep the URL length down. - It makes editing a lot less convenient and you can no longer - submit all changes at once, but at least it works around this - browser bug. - </para> - <para> - If you don't notice any editing problems, there is no reason - to enable this option, but if one of the submit buttons appears - to be broken, you should give it a try. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - split-large-forms 1 - </para> - </listitem> - </varlistentry> -</variablelist> -<![%config-file;[<literallayout>@@split-large-forms 0</literallayout>]]> -</sect3> - -<sect3 renderas="sect4" id="keep-alive-timeout"><title>keep-alive-timeout</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Number of seconds after which an open connection will no longer be reused. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable>Time in seconds.</replaceable> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>None</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - Connections are not reused. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This option has no effect if <application>Privoxy</application> - has been compiled without keep-alive support. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Note that reusing connections doesn't necessary cause speedups. - There are also a few privacy implications you should be aware of. - </para> - <para> - Outgoing connections are shared between clients (if there are more - than one) and closing the client that initiated the outgoing connection - does not affect the connection between &my-app; and the server unless - the client's request hasn't been completed yet. If the outgoing connection - is idle, it will not be closed until either <application>Privoxy's</application> - or the server's timeout is reached. While it's open, the server knows - that the system running &my-app; is still there. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - keep-alive-timeout 300 - </para> - </listitem> - </varlistentry> -</variablelist> -<![%config-file;[<literallayout>@@keep-alive-timeout 300</literallayout>]]> -</sect3> - - -<sect3 renderas="sect4" id="socket-timeout"><title>socket-timeout</title> -<variablelist> - <varlistentry> - <term>Specifies:</term> - <listitem> - <para> - Number of seconds after which a socket times out if - no data is received. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Type of value:</term> - <listitem> - <para> - <replaceable>Time in seconds.</replaceable> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Default value:</term> - <listitem> - <para>None</para> - </listitem> - </varlistentry> - <varlistentry> - <term>Effect if unset:</term> - <listitem> - <para> - A default value of 300 seconds is used. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - For SOCKS requests the timeout currently doesn't start until - the SOCKS server accepted the request. This will be fixed in - the next release. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Examples:</term> - <listitem> - <para> - socket-timeout 300 - </para> - </listitem> - </varlistentry> -</variablelist> -<![%config-file;[<literallayout>@@socket-timeout 300</literallayout>]]> -</sect3> - - -</sect2> - - - - - - -<sect2 id="windows-gui"> -<title>Windows GUI Options</title> -<para> - <application>Privoxy</application> has a number of options specific to the - Windows GUI interface: -</para> - -<anchor id="activity-animation"> -<![%config-file;[<para>@@</para>]]>  -<para> - If <quote>activity-animation</quote> is set to 1, the - <application>Privoxy</application> icon will animate when - <quote>Privoxy</quote> is active. To turn off, set to 0. -</para> - -<![%config-file;[<literallayout>@@#activity-animation 1</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>activity-animation 1</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="log-messages"> -<![%config-file;[<para>@@</para>]]>  -<para> - If <quote>log-messages</quote> is set to 1, - <application>Privoxy</application> will log messages to the console - window: -</para> - -<![%config-file;[<literallayout>@@#log-messages 1</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>log-messages 1</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="log-buffer-size"> -<![%config-file;[<para>@@</para>]]>  -<para> - If <quote>log-buffer-size</quote> is set to 1, the size of the log buffer, - i.e. the amount of memory used for the log messages displayed in the - console window, will be limited to <quote>log-max-lines</quote> (see below). -</para> - -<para> - Warning: Setting this to 0 will result in the buffer to grow infinitely and - eat up all your memory! -</para> - -<![%config-file;[<literallayout>@@#log-buffer-size 1</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>log-buffer-size 1</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="log-max-lines"> -<![%config-file;[<para>@@</para>]]>  -<para> - <application>log-max-lines</application> is the maximum number of lines held - in the log buffer. See above. -</para> - -<![%config-file;[<literallayout>@@#log-max-lines 200</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>log-max-lines 200</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="log-highlight-messages"> -<![%config-file;[<para>@@</para>]]>  -<para> - If <quote>log-highlight-messages</quote> is set to 1, - <application>Privoxy</application> will highlight portions of the log - messages with a bold-faced font: -</para> - -<![%config-file;[<literallayout>@@#log-highlight-messages 1</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>log-highlight-messages 1</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="log-font-name"> -<![%config-file;[<para>@@</para>]]>  -<para> - The font used in the console window: -</para> - -<![%config-file;[<literallayout>@@#log-font-name Comic Sans MS</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>log-font-name Comic Sans MS</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="log-font-size"> -<![%config-file;[<para>@@</para>]]>  -<para> - Font size used in the console window: -</para> - -<![%config-file;[<literallayout>@@#log-font-size 8</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>log-font-size 8</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="show-on-task-bar"> -<![%config-file;[<para>@@</para>]]>  -<para> - <quote>show-on-task-bar</quote> controls whether or not - <application>Privoxy</application> will appear as a button on the Task bar - when minimized: -</para> - -<![%config-file;[<literallayout>@@#show-on-task-bar 0</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>show-on-task-bar 0</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="close-button-minimizes"> -<![%config-file;[<para>@@</para>]]>  -<para> - If <quote>close-button-minimizes</quote> is set to 1, the Windows close - button will minimize <application>Privoxy</application> instead of closing - the program (close with the exit option on the File menu). -</para> - -<![%config-file;[<literallayout>@@#close-button-minimizes 1</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - <emphasis>close-button-minimizes 1</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -<anchor id="hide-console"> -<![%config-file;[<para>@@</para>]]>  -<para> - The <quote>hide-console</quote> option is specific to the MS-Win console - version of <application>Privoxy</application>. If this option is used, - <application>Privoxy</application> will disconnect from and hide the - command console. -</para> - -<![%config-file;[<literallayout>@@#hide-console</literallayout>]]> -<![%user-man;[ -<para> - <literal> - <msgtext> - <literallayout> - #<emphasis>hide-console</emphasis> - </literallayout> - </msgtext> - </literal> -</para> -]]> - -</sect2> -</sect1> - - - -<![%config-file;[ - - -<sect1 label=""> -<title></title> -<anchor id="filter"> -<anchor id="filter-file"> -<anchor id="regex"> -<anchor id="actions-file"> -<anchor id="af-patterns"> -</sect1> -]]> - - diff --git a/external/privoxy/doc/source/privoxy-man-page.sgml b/external/privoxy/doc/source/privoxy-man-page.sgml deleted file mode 100644 index ea336e3..0000000 --- a/external/privoxy/doc/source/privoxy-man-page.sgml +++ /dev/null @@ -1,352 +0,0 @@ - -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN"[ -<!entity % dummy "IGNORE"> -<!entity p-intro SYSTEM "privoxy.sgml"> -<!entity seealso SYSTEM "seealso.sgml"> -<!entity copyright SYSTEM "copyright.sgml"> -<!entity license SYSTEM "license.sgml"> -<!entity authors SYSTEM "p-authors.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-not-stable "IGNORE"> -<!entity % p-stable "INCLUDE"> -<!entity % p-text "IGNORE">  -<!entity % p-authors-formal "IGNORE">  -<!entity my-copy "(C)">  -<!entity % seealso-extra "IGNORE">  -]> - -<refentry id="privoxy"> -<refentryinfo> - <date>2009-02-15</date> -</refentryinfo> -<refmeta> - <refentrytitle>privoxy</refentrytitle> - <manvolnum>1</manvolnum> - <refmiscinfo> - Privoxy &p-version;<![%p-not-stable;[ &p-status;]]> - </refmiscinfo> -</refmeta> - -<refnamediv> - <refname><application>privoxy</application></refname> - <refpurpose>Privacy Enhancing Proxy</refpurpose> -</refnamediv> - -<refsynopsisdiv> - <cmdsynopsis> - <command>privoxy</command> - <arg><option>--help</option></arg> - <arg><option>--version</option></arg> - <arg><option>--no-daemon</option></arg> - <arg><option>--pidfile </option><replaceable class="parameter">pidfile</replaceable></arg> - <arg><option>--user </option><replaceable class="parameter">user[.group]</replaceable></arg> - <arg><option>--chroot</option></arg> - <arg><option>--pre-chroot-nslookup </option><replaceable class="parameter">hostname</replaceable></arg> - <arg><replaceable class="parameter">configfile</replaceable></arg> - </cmdsynopsis> - -</refsynopsisdiv> - - - -<refsect1><title>Options</title> - <para> - <command>Privoxy</command> may be invoked with the following command line - options: - </para> - - <variablelist> - <varlistentry> - <term>--help</term> - <listitem> - <para> - Print brief usage info and exit. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>--version</term> - <listitem> - <para> - Print version info and exit. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>--no-daemon</term> - <listitem> - <para> - Don't become a daemon, i.e. don't fork and become process group - leader, don't detach from controlling tty, and do all logging there. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>--pidfile <replaceable class="parameter">pidfile</replaceable></term> - <listitem> - <para> - On startup, write the process ID to <replaceable class="parameter">pidfile</replaceable>. - Delete the <replaceable class="parameter">pidfile</replaceable> on exit. - Failure to create or delete the <replaceable class="parameter">pidfile</replaceable> - is non-fatal. If no <command>--pidfile</command> option is given, no PID file will be used. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>--user <replaceable class="parameter">user[.group]</replaceable></term> - <listitem> - <para> -  -  - After (optionally) writing the PID file, assume the user ID of - <replaceable class="parameter">user</replaceable> and the GID of - <replaceable class="parameter">group</replaceable>, or, if the optional - <replaceable class="parameter">group</replaceable> was not given, the default group of - <replaceable class="parameter">user</replaceable>. Exit if the privileges are not - sufficient to do so. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>--chroot</term> - <listitem> - <para> - Before changing to the user ID given in the --user option, chroot to - that user's home directory, i.e. make the kernel pretend to the - <command>Privoxy</command> process that the directory tree starts - there. If set up carefully, this can limit the impact of possible - vulnerabilities in <command>Privoxy</command> to the files contained in - that hierarchy. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>--pre-chroot-nslookup <replaceable class="parameter">hostname</replaceable></term> - <listitem> - <para> - Initialize the resolver library using <replaceable class="parameter">hostname</replaceable> - before chroot'ing. On some systems this reduces the number of files - that must be copied into the chroot tree. - </para> - </listitem> - </varlistentry> - </variablelist> - - <para> - If the <filename>configfile</filename> is not specified on the command line, - <command>Privoxy</command> will look for a file named - <filename>config</filename> in the current directory. If no - <filename>configfile</filename> is found, <command>Privoxy</command> will - fail to start. - </para> - -</refsect1> - - - -<refsect1><title>Description</title> - - &p-intro; - -</refsect1> - - - -<refsect1><title>Installation and Usage</title> -<para> - Browsers can either be individually configured to use - <command>Privoxy</command> as a HTTP proxy (recommended), - or <command>Privoxy</command> can be combined with a packet - filter to build an intercepting proxy - (see <filename>config</filename>). The default setting is for - localhost, on port 8118 (configurable in the main config file). To set the - HTTP proxy in Firefox, go through: <command>Tools</command>; - <command>Options</command>; <command>General</command>; - <command>Connection Settings</command>; - <command>Manual Proxy Configuration</command>. -</para> -<para> - For Internet Explorer, go through: <command>Tools</command>; - <command>Internet Properties</command>; <command>Connections</command>; - <command>LAN Settings</command>. -</para> -<para> - The Secure (SSL) Proxy should also be set to the same values, otherwise - https: URLs will not be proxied. Note: <command>Privoxy</command> can only - proxy HTTP and HTTPS traffic. Do not try it with FTP or other protocols. - HTTPS presents some limitations, and not all features will work with HTTPS - connections. -</para> - -<para> - For other browsers, check the documentation. -</para> -</refsect1> - - - -<refsect1><title>Configuration</title> -<para> - <command>Privoxy</command> can be configured with the various configuration - files. The default configuration files are: <filename>config</filename>, - <filename>default.filter</filename>, <filename>default.action</filename> and - <filename>default.action</filename>. <filename>user.action</filename> should - be used for locally defined exceptions to the default rules in - <filename>match-all.action</filename> and <filename>default.action</filename>, - and <filename>user.filter</filename> for locally defined filters. These are - well commented. On Unix and Unix-like systems, these are located in - <filename>/etc/privoxy/</filename> by default. -</para> -<para> - <command>Privoxy</command> uses the concept of <command>actions</command> - in order to manipulate the data stream between the browser and remote sites. - There are various actions available with specific functions for such things - as blocking web sites, managing cookies, etc. These actions can be invoked - individually or combined, and used against individual URLs, or groups of URLs - that can be defined using wildcards and regular expressions. The result is - that the user has greatly enhanced control and freedom. -</para> -<para> - The actions list (ad blocks, etc) can also be configured with your - web browser at <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink> - (assuming the configuration allows it). - <command>Privoxy's</command> configuration parameters can also be viewed at - the same page. In addition, <command>Privoxy</command> can be toggled on/off. - This is an internal page, and does not require Internet access. -</para> -<para> - See the <ulink - url="http://www.privoxy.org/user-manual/"><citetitle>User Manual</citetitle></ulink> for a detailed - explanation of installation, general usage, all configuration options, new - features and notes on upgrading. -</para> -</refsect1> - - - - -<refsect1><title>Files</title> - -<literallayout> - <filename>/usr/sbin/privoxy</filename> - <filename>/etc/privoxy/config</filename> - <filename>/etc/privoxy/match-all.action</filename> - <filename>/etc/privoxy/default.action</filename> - <filename>/etc/privoxy/user.action</filename> - <filename>/etc/privoxy/default.filter</filename> - <filename>/etc/privoxy/user.filter</filename> - <filename>/etc/privoxy/trust</filename> - <filename>/etc/privoxy/templates/*</filename> - <filename>/var/log/privoxy/logfile</filename> -</literallayout> - -<para> - Various other files should be included, but may vary depending on platform - and build configuration. Additional documentation should be included in the local - documentation directory. -</para> - -</refsect1> - - - -<refsect1><title>Signals</title> -<para> -  - <command>Privoxy</command> terminates on the <command>SIGINT</command>, - <command>SIGTERM</command> and <command>SIGABRT</command> signals. Log - rotation scripts may cause a re-opening of the logfile by sending a - <command>SIGHUP</command> to <command>Privoxy</command>. Note that unlike - other daemons, <command>Privoxy</command> does not need to be made aware of - config file changes by <command>SIGHUP</command> -- it will detect them - automatically. -</para> - -</refsect1> - - -<refsect1><title>Notes</title> -<![%p-not-stable;[ -<para> - This is a &p-status; version of <command>Privoxy</command>. Not - all features are well tested. -</para>]]> -<para> - Please see the <citetitle>User Manual</citetitle> on how to contact the - developers, for feature requests, reporting problems, and other questions. -</para> - -</refsect1> - - -<refsect1><title>See Also</title> - - &seealso; - -</refsect1> - - -<refsect1><title>Development Team</title> - - &authors; - -</refsect1> - - -<refsect1><title>Copyright and License</title> - -<refsect2><title>Copyright</title> - - &copyright; - -</refsect2> - -<refsect2><title>License</title> - - &license; - -</refsect2> -</refsect1> - -</refentry> diff --git a/external/privoxy/doc/source/privoxy.sgml b/external/privoxy/doc/source/privoxy.sgml deleted file mode 100644 index 1e4791f..0000000 --- a/external/privoxy/doc/source/privoxy.sgml +++ /dev/null @@ -1,44 +0,0 @@ - - -<para> - Privoxy is a non-caching web proxy with advanced filtering capabilities - for enhancing privacy, modifying web page data and HTTP headers, controlling - access, and removing ads and other obnoxious Internet junk. Privoxy has a - flexible configuration and can be customized to suit individual needs and tastes. - It has application for both stand-alone systems and multi-user networks. -</para> - -<para> - Privoxy is Free Software and licensed under the GPL2. -</para> - -<para> - Privoxy is an associated project of Software in the Public Interest (SPI). - <ulink url="http://www.privoxy.org/faq/general.html#DONATE">Donations are welcome</ulink>. -</para> diff --git a/external/privoxy/doc/source/readme.sgml b/external/privoxy/doc/source/readme.sgml deleted file mode 100644 index 3bbacf7..0000000 --- a/external/privoxy/doc/source/readme.sgml +++ /dev/null @@ -1,268 +0,0 @@ -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ -<!entity % dummy "IGNORE"> -<!entity supported SYSTEM "supported.sgml"> -<!entity p-intro SYSTEM "privoxy.sgml"> -<!entity contacting SYSTEM "contacting.sgml"> -<!entity buildsource SYSTEM "buildsource.sgml"> -<!entity p-version "3.0.12"> -<!entity p-status "stable"> -<!entity % p-not-stable "IGNORE"> -<!entity % p-stable "INCLUDE"> -<!entity % p-text "INCLUDE">  -<!entity % p-doc "IGNORE">  -<!entity % p-readme "INCLUDE">  -]> - -<article id="index"> -<artheader> -<![%dummy;[ - <para> - <comment> - This is here to keep vim syntax file from breaking :/ - If I knew enough to fix it, I would. - PLEASE DO NOT REMOVE! HB: hal(a)foobox.net - </comment> - </para> -]]> -<abstract> -<para> - <literal> - <msgtext> - <literallayout> -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/doc/source/readme.sgml,v $ - * - * Purpose : README file to give a short intro. - * - * Copyright : Written by and Copyright (C) 2001-2009 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - *********************************************************************/ -</literallayout> -</msgtext> -</literal> -</para> - -<para> -  - This README is included with <![%p-not-stable;[ the development version of]]> - Privoxy &p-version;. See http://www.privoxy.org/ for more information. The current code maturity - level is <quote>&p-status;</quote><![%p-not-stable;[, but seems stable to us :)]]>. -</para> -</abstract> -</artheader> - - -&p-intro; - - - -<sect1 id="importantchanges" ><title>IMPORTANT CHANGES</title> -<para> - March 2009, Privoxy 3.0.12 is released. -</para> -<para> - This is primarily a bug fix release. See the "ChangeLog", and the "What's - New" section and the "Upgrader's Notes" in <citetitle>the User - Manual</citetitle> for details. -</para> - -<para> - February 2009, Privoxy 3.0.11 is released. -</para> -<para> - As usual there are changes that effect the configuration. See the "ChangeLog", - and the "What's New" section and the "Upgrader's Notes" in - <citetitle>the User Manual</citetitle> for details and specifics. -</para> -<para> - This is a stable release, and marks a departure for Privoxy development. -</para> -<para> - Previously, odd numbered releases were considered beta versions and - were only released at the end of the development cycle when the code - was already believed to be stable. Usually it was, so the stable release - contained pretty much the same code, but got a higher version number. - In the future we intend to release several snapshots between stable releases. - There will probably still be about two stable releases per year, - but hopefully about six snapshots instead of the two betas we have now. - The intentions is to make testing without CVS access easier. -</para> -</sect1> - - -<sect1 id="install" ><title>INSTALL</title> -<para> - See the <filename>INSTALL</filename> file in this directory, for installing - from raw source, and the <citetitle>User Manual</citetitle>, for all other - installation types. -</para> -</sect1> - - -<sect1 id="run"><title>RUN</title> -<para> - privoxy [--help] [--version] - [--no-daemon] [--pidfile PIDFILE] [--user USER[.GROUP]] [--chroot] [--pre-chroot-nslookup - HOSTNAME ][config_file] -</para> -<para> - See the man page or <citetitle>User Manual</citetitle> for an explanation of each option, and - other configuration and usage issues. -</para> -<para> - If no config_file is specified on the command line, Privoxy will look for a - file named 'config' in the current directory (except Win32 which will look - for 'config.txt'). If no config_file is found, Privoxy will fail to start. -</para> -<para> - Or for Red Hat and Fedora based distributions: /etc/rc.d/init.d/privoxy start -</para> -<para> - Or Debian and Ubuntu: /etc/init.d/privoxy start -</para> -</sect1> - - -<sect1 id="configuration"><title>CONFIGURATION</title> -<para> - See: 'config', 'default.action', 'user.action', 'default.filter', and - 'user.filter'. 'user.action' and 'user.filter' are for personal and local - configuration preferences. These are all well commented. Most of the magic is - in '*.action' files. 'user.action' should be used for any actions - customizations. On Unix-like systems, these files are typically installed in - /etc/privoxy. On Windows, then wherever the executable itself is installed. - There are many significant changes and advances from earlier versions. The - <citetitle>User Manual</citetitle> has an explanation of all configuration - options, and examples: http://www.privoxy.org/user-manual/. -</para> -<para> - Be sure to set your browser(s) for HTTP/HTTPS Proxy at <IP>:<Port>, or - whatever you specify in the config file under 'listen-address'. DEFAULT is - localhost:8118. Note that Privoxy ONLY proxies HTTP (and HTTPS) traffic. Do not try it - with FTP or other protocols for the simple reason it does not work. -</para> -<para> - The actions list can be configured via the web interface accessed via - http://p.p/, as well other options. -</para> -<![%p-not-stable;[ -<para> - All configuration files are subject to unannounced changes during the - development process. -</para> -]]> -</sect1> - - -<sect1 id="documentation"><title>DOCUMENTATION</title> -<para> - There should be documentation in the 'doc' subdirectory<![%p-not-stable;[, but it - may not be completed at this point]]>. In particular, see the - <citetitle>User Manual</citetitle> there, - the <citetitle>FAQ</citetitle>, and those interested in Privoxy development, should look at - <citetitle>developer-manual</citetitle>. -</para> -<para> - <![%p-not-stable;[ - The most up to date source of information on the current development version, - may still be either comments in the source code, or the included - configuration files. ]]>The source and configuration files are all well - commented. The main configuration files are: 'config', 'default.action', and - 'default.filter'<![%p-not-stable;[ in the top-level source directory]]>. -</para> - -<para> - Included documentation may vary according to platform and packager. All - documentation is posted on http://www.privoxy.org, in case you don't have it, - or can't find it. -</para> -</sect1> - - -<sect1 id="contact"><title>CONTACTING THE DEVELOPERS, BUG REPORTING AND FEATURE REQUESTS</title> - - &contacting; - -</sect1> - - - - - - - - - - - -</article> diff --git a/external/privoxy/doc/source/seealso.sgml b/external/privoxy/doc/source/seealso.sgml deleted file mode 100644 index 087ebc5..0000000 --- a/external/privoxy/doc/source/seealso.sgml +++ /dev/null @@ -1,113 +0,0 @@ - - -<para> - Other references and sites of interest to <application>Privoxy</application> - users: -</para> - -<para> - <simplelist> - <member> - <ulink - url="http://www.privoxy.org/">http://www.privoxy.org/</ulink>, - the <application>Privoxy</application> Home page. - </member> - </simplelist> - <simplelist> - <member> - <ulink - url="http://www.privoxy.org/faq/">http://www.privoxy.org/faq/</ulink>, - the <application>Privoxy</application> FAQ. - </member> - </simplelist> - <simplelist> - <member> - <ulink - url="http://www.privoxy.org/developer-manual/">http://www.privoxy.org/developer-manual/</ulink>, - the <application>Privoxy</application> developer manual. - </member> - </simplelist> - <simplelist> - <member> - <ulink url="https://sourceforge.net/projects/ijbswa/">https://sourceforge.net/projects/ijbswa/</ulink>, - the Project Page for <application>Privoxy</application> on - <ulink url="http://sourceforge.net">SourceForge</ulink>. - </member> - </simplelist> - <simplelist> - <member> - <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink>, - the web-based user interface. <application>Privoxy</application> must be - running for this to work. Shortcut: <ulink url="http://p.p/">http://p.p/</ulink> - </member> - </simplelist> - <simplelist> - <member> - <ulink url="https://sourceforge.net/tracker/?group_id=11118&atid=460288">https://sourceforge.net/tracker/?group_id=11118&atid=460288</ulink>, to submit <quote>misses</quote> and other - configuration related suggestions to the developers. - </member> - </simplelist> - <![%seealso-extra;[ -  - <simplelist> - <member> - <ulink url="http://www.junkbusters.com/ht/en/cookies.html">http://www.junkbusters.com/ht/en/cookies.html</ulink>, - an explanation how cookies are used to track web users. - </member> - </simplelist> - <simplelist> - <member> - <ulink url="http://www.junkbusters.com/ijb.html">http://www.junkbusters.com/ijb.html</ulink>, - the original Internet Junkbuster. - </member> - </simplelist> - <simplelist> - <member> - <ulink url="http://www.squid-cache.org/">http://www.squid-cache.org/</ulink>, a popular - caching proxy, which is often used together with <application>Privoxy</application>. - </member> - </simplelist> - <simplelist> - <member> - <ulink url="http://www.pps.jussieu.fr/~jch/software/polipo/">http://www.pps.jussieu.fr/~jch/software/polipo/</ulink>, - <application>Polipo</application> is a caching proxy with advanced features - like pipelining, multiplexing and caching of partial instances. In many setups - it can be used as <application>Squid</application> replacement. - </member> - </simplelist> - <simplelist> - <member> - <ulink url="https://www.torproject.org/">https://www.torproject.org/</ulink>, - <application>Tor</application> can help anonymize web browsing, - web publishing, instant messaging, IRC, SSH, and other applications. - </member> - </simplelist> - ]]> -</para> diff --git a/external/privoxy/doc/source/supported.sgml b/external/privoxy/doc/source/supported.sgml deleted file mode 100644 index 62bfde1..0000000 --- a/external/privoxy/doc/source/supported.sgml +++ /dev/null @@ -1,46 +0,0 @@ - -<para> - At present, <application>Privoxy</application> is known to run on - Windows(95, 98, ME, 2000, XP, Vista), GNU/Linux (RedHat, SuSE, Debian, - Fedora, Gentoo, Slackware and others), Mac OSX, OS/2, AmigaOS, FreeBSD, - NetBSD, OpenBSD, Solaris, and various other flavors of Unix. -</para> - -<![%p-supp-userman;[ -<para> - But any operating system that runs TCP/IP, can conceivably take advantage of - <application>Privoxy</application> in a networked situation where - <application>Privoxy</application> would run as a server on a LAN gateway. - Then only the <quote>gateway</quote> needs to be running one of the above - operating systems. -</para> - -<para> - Source code is freely available, so porting to other operating systems - is always a possibility. -</para> -]]> diff --git a/external/privoxy/doc/source/temp/manpage.links b/external/privoxy/doc/source/temp/manpage.links deleted file mode 100644 index e69de29..0000000 diff --git a/external/privoxy/doc/source/temp/manpage.refs b/external/privoxy/doc/source/temp/manpage.refs deleted file mode 100644 index 09dd95e..0000000 --- a/external/privoxy/doc/source/temp/manpage.refs +++ /dev/null @@ -1,4 +0,0 @@ -{ - 'refentry:PRIVOXY' => 'privoxy(1)', - '' => '' -} diff --git a/external/privoxy/doc/source/user-manual.sgml b/external/privoxy/doc/source/user-manual.sgml deleted file mode 100644 index 2999e3e..0000000 --- a/external/privoxy/doc/source/user-manual.sgml +++ /dev/null @@ -1,9328 +0,0 @@ -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ -<!entity % dummy "IGNORE"> -<!entity supported SYSTEM "supported.sgml"> -<!entity newfeatures SYSTEM "newfeatures.sgml"> -<!entity p-intro SYSTEM "privoxy.sgml"> -<!entity seealso SYSTEM "seealso.sgml"> -<!entity buildsource SYSTEM "buildsource.sgml"> -<!entity contacting SYSTEM "contacting.sgml"> -<!entity history SYSTEM "history.sgml"> -<!entity copyright SYSTEM "copyright.sgml"> -<!entity license SYSTEM "license.sgml"> -<!entity p-authors SYSTEM "p-authors.sgml"> -<!entity config SYSTEM "p-config.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-authors-formal "INCLUDE">  -<!entity % p-not-stable "IGNORE"> -<!entity % p-stable "INCLUDE"> -<!entity % p-text "IGNORE">  -<!entity % p-doc "INCLUDE">  -<!entity % p-readme "IGNORE"> -<!entity % user-man "IGNORE"> -<!entity % config-file "IGNORE"> -<!entity % p-supp-userman "IGNORE">  -<!entity my-copy "©">  -<!entity % draft "IGNORE">  -<!entity % seealso-extra "INCLUDE">  -<!entity my-app "<application>Privoxy</application>"> -]> - - -<article id="index"> -<artheader> - -<title>Privoxy &p-version; User Manual</title> - -<pubdate> - <subscript> - - - <link linkend="copyright">Copyright</link> &my-copy; 2001-2009 by - <ulink url="http://www.privoxy.org/">Privoxy Developers</ulink> - </subscript> -</pubdate> - -<pubdate>$Id: user-manual.sgml,v 2.103 2009/03/21 10:49:05 fabiankeil Exp $</pubdate> - - - - -<abstract> - -<![%dummy;[ - <para> - <comment> - This is here to keep vim syntax file from breaking :/ - If I knew enough to fix it, I would. - PLEASE DO NOT REMOVE! HB: hal(a)foobox.net - </comment> - </para> -]]> - - <para> - The <citetitle>Privoxy User Manual</citetitle> gives users information on how to - install, configure and use <ulink - url="http://www.privoxy.org/">Privoxy</ulink>. - </para> - - - &p-intro; - - - <para> - You can find the latest version of the <citetitle>Privoxy User Manual</citetitle> at <ulink - url="http://www.privoxy.org/user-manual/">http://www.privoxy.org/user-manual/</ulink>. - Please see the <link linkend="contact">Contact section</link> on how to - contact the developers. - </para> - - - - -</abstract> - -</artheader> - - -<sect1 label="1" id="introduction"><title>Introduction</title> -<para> - This documentation is included with the current &p-status; version of - <application>Privoxy</application>, v.&p-version;<![%p-not-stable;[, - and is mostly complete at this point. The most up to date reference for the - time being is still the comments in the source files and in the individual - configuration files. Development of a new version is currently nearing - completion, and includes significant changes and enhancements over - earlier versions. ]]>. -</para> - - -<![%p-not-stable;[ -<para> - Since this is a &p-status; version, not all new features are well tested. This - documentation may be slightly out of sync as a result (especially with - CVS sources). And there <emphasis>may be</emphasis> bugs, though hopefully - not many! -</para> -]]> - - -<sect2 id="features"><title>Features</title> -<para> - In addition to the core - features of ad blocking and - <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookie</ulink> management, - <application>Privoxy</application> provides many supplemental - features<![%p-not-stable;[, some of them currently under development]]>, - that give the end-user more control, more privacy and more freedom: -</para> - - &newfeatures; - -</sect2> - -</sect1> - - - - - -<sect1 id="installation"><title>Installation</title> - -<para> - <application>Privoxy</application> is available both in convenient pre-compiled - packages for a wide range of operating systems, and as raw source code. - For most users, we recommend using the packages, which can be downloaded from our - <ulink url="http://sourceforge.net/projects/ijbswa/">Privoxy Project - Page</ulink>. -</para> - -<para> - Note: - On some platforms, the installer may remove previously installed versions, if - found. (See below for your platform). In any case <emphasis>be sure to backup - your old configuration if it is valuable to you.</emphasis> See the <link - linkend="upgradersnote">note to upgraders</link> section below. -</para> - - -<sect2 id="installation-packages"><title>Binary Packages</title> -<para> -How to install the binary packages depends on your operating system: -</para> - - - - -<sect3 id="installation-pack-rpm"><title>Red Hat and Fedora RPMs</title> - -<para> - RPMs can be installed with <literal>rpm -Uvh privoxy-&p-version;-1.rpm</literal>, - and will use <filename>/etc/privoxy</filename> for the location - of configuration files. -</para> - -<para> - Note that on Red Hat, <application>Privoxy</application> will - <emphasis>not</emphasis> be automatically started on system boot. You will - need to enable that using <command>chkconfig</command>, - <command>ntsysv</command>, or similar methods. -</para> - -<para> - If you have problems with failed dependencies, try rebuilding the SRC RPM: - <literal>rpm --rebuild privoxy-&p-version;-1.src.rpm</literal>. This - will use your locally installed libraries and RPM version. -</para> - -<para> - Also note that if you have a <application>Junkbuster</application> RPM installed - on your system, you need to remove it first, because the packages conflict. - Otherwise, RPM will try to remove <application>Junkbuster</application> - automatically if found, before installing <application>Privoxy</application>. -</para> -</sect3> - - -<sect3 id="installation-deb"><title>Debian and Ubuntu</title> -<para> - DEBs can be installed with <literal>apt-get install privoxy</literal>, - and will use <filename>/etc/privoxy</filename> for the location of - configuration files. -</para> -</sect3> - - -<sect3 id="installation-pack-win"><title>Windows</title> - -<para> - Just double-click the installer, which will guide you through - the installation process. You will find the configuration files - in the same directory as you installed <application>Privoxy</application> in. -</para> -<para> - Version 3.0.5 beta introduced full <application>Windows</application> service - functionality. On Windows only, the <application>Privoxy</application> - program has two new command line arguments to install and uninstall - <application>Privoxy</application> as a <emphasis>service</emphasis>. -</para> - <variablelist> - <varlistentry> - <term>Arguments:</term> - <listitem> - <para> - <replaceable class="parameter">--install</replaceable>[:<replaceable class="parameter">service_name</replaceable>] - </para> - <para> - <replaceable class="parameter">--uninstall</replaceable>[:<replaceable class="parameter">service_name</replaceable>] - </para> - </listitem> - </varlistentry> - </variablelist> - <para> - After invoking <application>Privoxy</application> with - <command>--install</command>, you will need to bring up the - <application>Windows</application> service console to assign the user you - want <application>Privoxy</application> to run under, and whether or not you - want it to run whenever the system starts. You can start the - <application>Windows</application> services console with the following - command: <command>services.msc</command>. If you do not take the manual step - of modifying <application>Privoxy's</application> service settings, it will - not start. Note too that you will need to give Privoxy a user account that - actually exists, or it will not be permitted to - write to its log and configuration files. -</para> - -</sect3> - - -<sect3 id="installation-pack-bintgz"><title>Solaris </title> - -<para> - Create a new directory, <literal>cd</literal> to it, then unzip and - untar the archive. For the most part, you'll have to figure out where - things go.  -</para> -</sect3> - - -<sect3 id="installation-os2"><title>OS/2</title> - -<para> - First, make sure that no previous installations of - <application>Junkbuster</application> and / or - <application>Privoxy</application> are left on your - system. Check that no <application>Junkbuster</application> - or <application>Privoxy</application> objects are in - your startup folder. - -</para> - -<para> - Then, just double-click the WarpIN self-installing archive, which will - guide you through the installation process. A shadow of the - <application>Privoxy</application> executable will be placed in your - startup folder so it will start automatically whenever OS/2 starts. -</para> - -<para> - The directory you choose to install <application>Privoxy</application> - into will contain all of the configuration files. -</para> -</sect3> - - -<sect3 id="installation-mac"><title>Mac OS X</title> -<para> - Unzip the downloaded file (you can either double-click on the zip file - icon from the Finder, or from the desktop if you downloaded it there). - Then, double-click on the package installer icon and follow the - installation process. -</para> -<para> - The privoxy service will automatically start after a successful - installation (in addition to every time your computer starts up). To - prevent the privoxy service from automatically starting when your - computer starts up, remove or rename the folder named - <literal>/Library/StartupItems/Privoxy</literal>. -</para> -<para> - To manually start or stop the privoxy service, use the Privoxy Utility - for Mac OS X. This application controls the privoxy service (e.g. - starting and stopping the service as well as uninstalling the software). -</para> -</sect3> - - -<sect3 id="installation-amiga"><title>AmigaOS</title> -<para> - Copy and then unpack the <filename>lha</filename> archive to a suitable location. - All necessary files will be installed into <application>Privoxy</application> - directory, including all configuration and log files. To uninstall, just - remove this directory. -</para> -</sect3> - - -<sect3 id="installation-tbz"><title>FreeBSD</title> - -<para> - Privoxy is part of FreeBSD's Ports Collection, you can build and install - it with <literal>cd /usr/ports/www/privoxy; make install clean</literal>. -</para> -<para> - If you don't use the ports, you can fetch and install - the package with <literal>pkg_add -r privoxy</literal>. -</para> -<para> - The port skeleton and the package can also be downloaded from the - <ulink url="https://sourceforge.net/project/showfiles.php?group_id=11118">File Release - Page</ulink>, but there's no reason to use them unless you're interested in the - beta releases which are only available there. -</para> -</sect3> - - -<sect3 id="installattion-gentoo"><title>Gentoo</title> -<para> - Gentoo source packages (Ebuilds) for <application>Privoxy</application> are - contained in the Gentoo Portage Tree (they are not on the download page, - but there is a Gentoo section, where you can see when a new - <application>Privoxy</application> Version is added to the Portage Tree). -</para> -<para> - Before installing <application>Privoxy</application> under Gentoo just do - first <literal>emerge --sync</literal> to get the latest changes from the - Portage tree. With <literal>emerge privoxy</literal> you install the latest - version. -</para> -<para> - Configuration files are in <filename>/etc/privoxy</filename>, the - documentation is in <filename>/usr/share/doc/privoxy-&p-version;</filename> - and the Log directory is in <filename>/var/log/privoxy</filename>. -</para> -</sect3> - -</sect2> - - -<sect2 id="installation-source"><title>Building from Source</title> - -<para> - The most convenient way to obtain the <application>Privoxy</application> sources - is to download the source tarball from our - <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118&package_id=…">project download - page</ulink>. -</para> - -<para> - If you like to live on the bleeding edge and are not afraid of using - possibly unstable development versions, you can check out the up-to-the-minute - version directly from <ulink url="http://sourceforge.net/cvs/?group_id=11118">the - CVS repository</ulink>. - -</para> - - -&buildsource; - - -</sect2> - -<sect2 id="installation-keepupdated"><title>Keeping your Installation Up-to-Date</title> -<para> - As user feedback comes in and development continues, we will make updated versions - of both the main <link linkend="actions-file">actions file</link> (as a <ulink - url="http://sourceforge.net/project/showfiles.php?group_id=11118&release_id=…">separate - package</ulink>) and the software itself (including the actions file) available for - download. -</para> - -<para> - If you wish to receive an email notification whenever we release updates of - <application>Privoxy</application> or the actions file, <ulink - url="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/">subscribe - to our announce mailing list</ulink>, ijbswa-announce(a)lists.sourceforge.net. -</para> - -<para> - In order not to lose your personal changes and adjustments when updating - to the latest <literal>default.action</literal> file we <emphasis>strongly - recommend</emphasis> that you use <literal>user.action</literal> and - <literal>user.filter</literal> for your local - customizations of <application>Privoxy</application>. See the <link - linkend="actions-file">Chapter on actions files</link> for details. -</para> - -</sect2> - - -</sect1> - - - - -<sect1 id="whatsnew"> -<title>What's New in this Release</title> -<para> - <application>Privoxy 3.0.12</application> is mainly a bugfix release: -</para> - -<para> - <itemizedlist> - <listitem> - <para> - The socket-timeout option now also works on platforms whose - select() implementation modifies the timeout structure. - Previously the timeout was triggered even if the connection - didn't stall. Reported by cyberpatrol. - </para> - </listitem> - <listitem> - <para> - The Connection: keep-alive code properly deals with files - larger than 2GB. Previously the connection was closed too - early. - </para> - </listitem> - <listitem> - <para> - The content length for files above 2GB is logged correctly. - </para> - </listitem> - <listitem> - <para> - The user-manual directive on the show-status page links to - the documentation location specified with the directive, - not to the Privoxy website. - </para> - </listitem> - <listitem> - <para> - When running in daemon mode, Privoxy doesn't log anything - to the console unless there are errors before the logfile - has been opened. - </para> - </listitem> - <listitem> - <para> - The show-status page prints warnings about invalid directives - on the same line as the directives themselves. - </para> - </listitem> - <listitem> - <para> - Fixed several justified (but harmless) compiler warnings, - mostly on 64 bit platforms. - </para> - </listitem> - <listitem> - <para> - The mingw32 version explicitly requests the default charset - to prevent display problems with some fonts available on more - recent Windows versions. Patch by Burberry. - </para> - </listitem> - <listitem> - <para> - The mingw32 version uses the Privoxy icon in the alt-tab - windows. Patch by Burberry. - </para> - </listitem> - <listitem> - <para> - The timestamp and the thread id is omitted in the "Fatal error" - message box on mingw32. - </para> - </listitem> - <listitem> - <para> - Fixed two related mingw32-only buffer overflows. Triggering - them required control over the configuration file, therefore - this isn't seen as a security issue. - </para> - </listitem> - <listitem> - <para> - In verbose mode, or if the new option --show-skipped-tests - is used, Privoxy-Regression-Test logs skipped tests and the - skip reason. - </para> - </listitem> - </itemizedlist> -</para> - - - - -<sect2 id="upgradersnote"> -<title>Note to Upgraders</title> - -<para> - A quick list of things to be aware of before upgrading from earlier - versions of <application>Privoxy</application>: -</para> - -<para> - <itemizedlist> - - <listitem> - <para> - The recommended way to upgrade &my-app; is to backup your old - configuration files, install the new ones, verify that &my-app; - is working correctly and finally merge back your changes using - <application>diff</application> and maybe <application>patch</application>. - </para> - <para> - There are a number of new features in each &my-app; release and - most of them have to be explicitly enabled in the configuration - files. Old configuration files obviously don't do that and due - to syntax changes using old configuration files with a new - &my-app; isn't always possible anyway. - </para> - </listitem> - <listitem> - <para> - Note that some installers remove earlier versions completely, - including configuration files, therefore you should really save - any important configuration files! - </para> - </listitem> - <listitem> - <para> - On the other hand, other installers don't overwrite existing configuration - files, thinking you will want to do that yourself. - </para> - </listitem> - <listitem> - <para> - <filename>standard.action</filename> has been merged into - the <filename>default.action</filename> file. - </para> - </listitem> - <listitem> - <para> - In the default configuration only fatal errors are logged now. - You can change that in the <link linkend="DEBUG">debug section</link> - of the configuration file. You may also want to enable more verbose - logging until you verified that the new &my-app; version is working - as expected. - </para> - </listitem> - - <listitem> - <para> - Three other config file settings are now off by default: - <link linkend="enable-remote-toggle">enable-remote-toggle</link>, - <link linkend="enable-remote-http-toggle">enable-remote-http-toggle</link>, - and <link linkend="enable-edit-actions">enable-edit-actions</link>. - If you use or want these, you will need to explicitly enable them, and - be aware of the security issues involved. - </para> - </listitem> - - - - - </itemizedlist> -</para> - -</sect2> -</sect1> - - -<sect1 id="quickstart"><title>Quickstart to Using Privoxy</title> -<para> - <itemizedlist> - - <listitem> - <para> - Install <application>Privoxy</application>. See the <link - linkend="installation">Installation Section</link> below for platform specific - information. - </para> - </listitem> - - <listitem> - <para> - Advanced users and those who want to offer <application>Privoxy</application> - service to more than just their local machine should check the <link - linkend="config">main config file</link>, especially the <link - linkend="access-control">security-relevant</link> options. These are - off by default. - </para> - </listitem> - - <listitem> - <para> - Start <application>Privoxy</application>, if the installation program has - not done this already (may vary according to platform). See the section - <link linkend="startup">Starting <application>Privoxy</application></link>. - </para> - </listitem> - - <listitem> - <para> - Set your browser to use <application>Privoxy</application> as HTTP and - HTTPS (SSL) <ulink url="http://en.wikipedia.org/wiki/Proxy_server">proxy</ulink> - by setting the proxy configuration for address of - <literal>127.0.0.1</literal> and port <literal>8118</literal>. - <emphasis>DO NOT</emphasis> activate proxying for <literal>FTP</literal> or - any protocols besides HTTP and HTTPS (SSL) unless you intend to prevent your - browser from using these protocols. - </para> - </listitem> - - <listitem> - <para> - Flush your browser's disk and memory caches, to remove any cached ad images. - If using <application>Privoxy</application> to manage - <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink>, - you should remove any currently stored cookies too. - </para> - </listitem> - - <listitem> - <para> - A default installation should provide a reasonable starting point for - most. There will undoubtedly be occasions where you will want to adjust the - configuration, but that can be dealt with as the need arises. Little - to no initial configuration is required in most cases, you may want - to enable the - <ulink url="config.html#ENABLE-EDIT-ACTIONS">web-based action editor</ulink> though. - Be sure to read the warnings first. - </para> - <para> - See the <link linkend="configuration">Configuration section</link> for more - configuration options, and how to customize your installation. - You might also want to look at the <link - linkend="quickstart-ad-blocking">next section</link> for a quick - introduction to how <application>Privoxy</application> blocks ads and - banners. -</para> - </listitem> - - <listitem> - <para> - If you experience ads that slip through, innocent images that are - blocked, or otherwise feel the need to fine-tune - <application>Privoxy's</application> behavior, take a look at the <link - linkend="actions-file">actions files</link>. As a quick start, you might - find the <link linkend="act-examples">richly commented examples</link> - helpful. You can also view and edit the actions files through the <ulink - url="http://config.privoxy.org">web-based user interface</ulink>. The - Appendix <quote><link linkend="actionsanat">Troubleshooting: Anatomy of an - Action</link></quote> has hints on how to understand and debug actions that - <quote>misbehave</quote>. - </para> - </listitem> - - - - <listitem> - <para> - Please see the section <link linkend="contact">Contacting the - Developers</link> on how to report bugs, problems with websites or to get - help. - </para> - </listitem> - - <listitem> - <para> - Now enjoy surfing with enhanced control, comfort and privacy! - </para> - </listitem> - - </itemizedlist> -</para> - - - - -<sect2 id="quickstart-ad-blocking"> -<title>Quickstart to Ad Blocking</title> - -<para> - Ad blocking is but one of <application>Privoxy's</application> - array of features. Many of these features are for the technically minded advanced - user. But, ad and banner blocking is surely common ground for everybody. -</para> -<para> - This section will provide a quick summary of ad blocking so - you can get up to speed quickly without having to read the more extensive - information provided below, though this is highly recommended. -</para> -<para> - First a bit of a warning ... blocking ads is much like blocking SPAM: the - more aggressive you are about it, the more likely you are to block - things that were not intended. And the more likely that some things - may not work as intended. So there is a trade off here. If you want - extreme ad free browsing, be prepared to deal with more - <quote>problem</quote> sites, and to spend more time adjusting the - configuration to solve these unintended consequences. In short, there is - not an easy way to eliminate <emphasis>all</emphasis> ads. Either take - the easy way and settle for <emphasis>most</emphasis> ads blocked with the - default configuration, or jump in and tweak it for your personal surfing - habits and preferences. -</para> -<para> - Secondly, a brief explanation of <application>Privoxy's </application> - <quote>actions</quote>. <quote>Actions</quote> in this context, are - the directives we use to tell <application>Privoxy</application> to perform - some task relating to HTTP transactions (i.e. web browsing). We tell - <application>Privoxy</application> to take some <quote>action</quote>. Each - action has a unique name and function. While there are many potential - <application>actions</application> in <application>Privoxy's</application> - arsenal, only a few are used for ad blocking. <link - linkend="actions">Actions</link>, and <link linkend="actions-file">action - configuration files</link>, are explained in depth below. -</para> -<para> - Actions are specified in <application>Privoxy's</application> configuration, - followed by one or more URLs to which the action should apply. URLs - can actually be URL type <link linkend="af-patterns">patterns</link> that use - wildcards so they can apply potentially to a range of similar URLs. The - actions, together with the URL patterns are called a section. -</para> -<para> - When you connect to a website, the full URL will either match one or more - of the sections as defined in <application>Privoxy's</application> configuration, - or not. If so, then <application>Privoxy</application> will perform the - respective actions. If not, then nothing special happens. Furthermore, web - pages may contain embedded, secondary URLs that your web browser will - use to load additional components of the page, as it parses the - original page's HTML content. An ad image for instance, is just an URL - embedded in the page somewhere. The image itself may be on the same server, - or a server somewhere else on the Internet. Complex web pages will have many - such embedded URLs. &my-app; can deal with each URL individually, so, for - instance, the main page text is not touched, but images from such-and-such - server are blocked. -</para> - -<para> - The most important actions for basic ad blocking are: <literal><link - linkend="block">block</link></literal>, <literal><link - linkend="handle-as-image">handle-as-image</link></literal>, - <literal><link - linkend="handle-as-empty-document">handle-as-empty-document</link></literal>,and - <literal><link linkend="set-image-blocker">set-image-blocker</link></literal>: -</para> - -<para> - <itemizedlist> - - <listitem> - <para> - <literal><link linkend="block">block</link></literal> - this is perhaps - the single most used action, and is particularly important for ad blocking. - This action stops any contact between your browser and any URL patterns - that match this action's configuration. It can be used for blocking ads, - but also anything that is determined to be unwanted. By itself, it simply - stops any communication with the remote server and sends - <application>Privoxy</application>'s own built-in BLOCKED page instead to - let you now what has happened (with some exceptions, see below). - </para> - </listitem> - - <listitem> - <para> - <literal><link linkend="handle-as-image">handle-as-image</link></literal> - - tells <application>Privoxy</application> to treat this URL as an image. - <application>Privoxy</application>'s default configuration already does this - for all common image types (e.g. GIF), but there are many situations where this - is not so easy to determine. So we'll force it in these cases. This is particularly - important for ad blocking, since only if we know that it's an image of - some kind, can we replace it with an image of our choosing, instead of the - <application>Privoxy</application> BLOCKED page (which would only result in - a <quote>broken image</quote> icon). There are some limitations to this - though. For instance, you can't just brute-force an image substitution for - an entire HTML page in most situations. - </para> - </listitem> - - <listitem> - <para> - <literal><link linkend="handle-as-empty-document">handle-as-empty-document</link></literal> - - sends an empty document instead of <application>Privoxy's</application> - normal BLOCKED HTML page. This is useful for file types that are neither - HTML nor images, such as blocking JavaScript files. - </para> - </listitem> - - <listitem> - <para> - <literal><link - linkend="set-image-blocker">set-image-blocker</link></literal> - tells - <application>Privoxy</application> what to display in place of an ad image that - has hit a block rule. For this to come into play, the URL must match a - <literal><link linkend="block">block</link></literal> action somewhere in the - configuration, <emphasis>and</emphasis>, it must also match an - <literal><link linkend="handle-as-image">handle-as-image</link></literal> action. - </para> - <para> - The configuration options on what to display instead of the ad are: - </para> - <simplelist> - <member> -    <emphasis>pattern</emphasis> - a checkerboard pattern, so that an ad - replacement is obvious. This is the default. - </member> - </simplelist> - <simplelist> - <member> -    <emphasis>blank</emphasis> - A very small empty GIF image is displayed. - This is the so-called <quote>invisible</quote> configuration option. - </member> - </simplelist> - <simplelist> - <member> -    <emphasis>http://<URL></emphasis> - A redirect to any image anywhere - of the user's choosing (advanced usage). - </member> - </simplelist> - </listitem> - -</itemizedlist> -</para> - -<para> - Advanced users will eventually want to explore &my-app; - <literal><link linkend="filter">filters</link></literal> as well. Filters - are very different from <literal><link - linkend="block">blocks</link></literal>. - A <quote>block</quote> blocks a site, page, or unwanted contented. Filters - are a way of filtering or modifying what is actually on the page. An example - filter usage: a text replacement of <quote>no-no</quote> for - <quote>nasty-word</quote>. That is a very simple example. This process can be - used for ad blocking, but it is more in the realm of advanced usage and has - some pitfalls to be wary off. -</para> - -<para> - The quickest way to adjust any of these settings is with your browser through - the special <application>Privoxy</application> editor at <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink> - (shortcut: <ulink url="http://p.p/">http://p.p/show-status</ulink>). This - is an internal page, and does not require Internet access. -</para> - -<para> - Note that as of <application>Privoxy</application> 3.0.7 beta the - action editor is disabled by default. Check the - <ulink url="config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions - section in the configuration file</ulink> to learn why and in which - cases it's safe to enable again. -</para> - -<para> - If you decided to enable the action editor, select the appropriate - <quote>actions</quote> file, and click - <quote><guibutton>Edit</guibutton></quote>. It is best to put personal or - local preferences in <filename>user.action</filename> since this is not - meant to be overwritten during upgrades, and will over-ride the settings in - other files. Here you can insert new <quote>actions</quote>, and URLs for ad - blocking or other purposes, and make other adjustments to the configuration. - <application>Privoxy</application> will detect these changes automatically. -</para> - -<para> - A quick and simple step by step example: -</para> - -<para> - <itemizedlist> - - <listitem> - <para> - Right click on the ad image to be blocked, then select - <quote><guimenuitem>Copy Link Location</guimenuitem></quote> from the - pop-up menu. - </para> - </listitem> - <listitem> - <para> - Set your browser to - <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink> - </para> - </listitem> - <listitem> - <para> - Find <filename>user.action</filename> in the top section, and click - on <quote><guibutton>Edit</guibutton></quote>: - </para> - -  - <para> - <figure pgwide="0" float="0"><title>Actions Files in Use</title> - <mediaobject> - <imageobject> - <imagedata fileref="files-in-use.jpg" format="jpg"> - </imageobject> - <textobject> - <phrase>[ Screenshot of Actions Files in Use ]</phrase> - </textobject> - </mediaobject> - </figure> - </para> - </listitem> - - <listitem> - <para> - You should have a section with only - <literal><link linkend="block">block</link></literal> listed under - <quote>Actions:</quote>. - If not, click a <quote><guibutton>Insert new section below</guibutton></quote> - button, and in the new section that just appeared, click the - <guibutton>Edit</guibutton> button right under the word <quote>Actions:</quote>. - This will bring up a list of all actions. Find - <literal><link linkend="block">block</link></literal> near the top, and click - in the <quote>Enabled</quote> column, then <quote><guibutton>Submit</guibutton></quote> - just below the list. - </para> - </listitem> - <listitem> - <para> - Now, in the <literal><link linkend="block">block</link></literal> actions section, - click the <quote><guibutton>Add</guibutton></quote> button, and paste the URL the - browser got from <quote><guimenuitem>Copy Link Location</guimenuitem></quote>. - Remove the <literal>http://</literal> at the beginning of the URL. Then, click - <quote><guibutton>Submit</guibutton></quote> (or - <quote><guibutton>OK</guibutton></quote> if in a pop-up window). - </para> - </listitem> - <listitem> - <para> - Now go back to the original page, and press <keycap>SHIFT-Reload</keycap> - (or flush all browser caches). The image should be gone now. - </para> - </listitem> - - </itemizedlist> -</para> - -<para> - This is a very crude and simple example. There might be good reasons to use a - wildcard pattern match to include potentially similar images from the same - site. For a more extensive explanation of <quote>patterns</quote>, and - the entire actions concept, see <link linkend="actions-file">the Actions - section</link>. -</para> - -<para> - For advanced users who want to hand edit their config files, you might want - to now go to the <link linkend="act-examples">Actions Files Tutorial</link>. - The ideas explained therein also apply to the web-based editor. -</para> -<para> - There are also various - <link linkend="filter">filters</link> that can be used for ad blocking - (filters are a special subset of actions). These - fall into the <quote>advanced</quote> usage category, and are explained in - depth in later sections. -</para> - -</sect2> - -</sect1> - - - - - -<sect1 id="startup"> -<title>Starting Privoxy</title> -<para> - Before launching <application>Privoxy</application> for the first time, you - will want to configure your browser(s) to use - <application>Privoxy</application> as a HTTP and HTTPS (SSL) - <ulink url="http://en.wikipedia.org/wiki/Proxy_server">proxy</ulink>. The default is - 127.0.0.1 (or localhost) for the proxy address, and port 8118 (earlier versions - used port 8000). This is the one configuration step <emphasis>that must be done -</emphasis>! -</para> -<para> - Please note that <application>Privoxy</application> can only proxy HTTP and - HTTPS traffic. It will not work with FTP or other protocols. -</para> - -  - <para> - <figure pgwide="0" float="0"><title>Proxy Configuration Showing - Mozilla/Netscape HTTP and HTTPS (SSL) Settings</title> - <mediaobject> - <imageobject> - <imagedata fileref="proxy_setup.jpg" format="jpg"> - </imageobject> - <textobject> - <phrase>[ Screenshot of Mozilla Proxy Configuration ]</phrase> - </textobject> - </mediaobject> - </figure> - </para> - - -<para> - With <application>Firefox</application>, this is typically set under: -</para> - -<literallayout> - <guibutton>Tools</guibutton> -> <guibutton>Options</guibutton> -> <guibutton>Advanced</guibutton> -> <guibutton>Network</guibutton> -><guibutton>Connection</guibutton> -> <guibutton>Settings</guibutton> - -</literallayout> - -<para> - Or optionally on some platforms: -</para> - -<literallayout> - <guibutton>Edit</guibutton> -> <guibutton>Preferences</guibutton> -> <guibutton>General</guibutton> -> <guibutton>Connection Settings</guibutton> -> <guibutton>Manual Proxy Configuration</guibutton> - -</literallayout> - - -<para> - With <application>Netscape</application> (and - <application>Mozilla</application>), this can be set under: -</para> - - -<literallayout> - - - <guibutton>Edit</guibutton> -> <guibutton>Preferences</guibutton> -> <guibutton>Advanced</guibutton> -> <guibutton>Proxies</guibutton> -> <guibutton>HTTP Proxy</guibutton> - -</literallayout> - -<para> - For <application>Internet Explorer v.5-7</application>: -</para> - -<literallayout> - <guibutton>Tools</guibutton> -> <guibutton>Internet Options</guibutton> -> <guibutton>Connections</guibutton> -> <guibutton>LAN Settings</guibutton> -</literallayout> - -<para> - Then, check <quote>Use Proxy</quote> and fill in the appropriate info - (Address: 127.0.0.1, Port: 8118). Include HTTPS (SSL), if you want HTTPS - proxy support too (sometimes labeled <quote>Secure</quote>). Make sure any - checkboxes like <quote>Use the same proxy server for all protocols</quote> is - <emphasis>UNCHECKED</emphasis>. You want only HTTP and HTTPS (SSL)! -</para> - -  - <para> - <figure pgwide="0" float="0"><title>Proxy Configuration Showing - Internet Explorer HTTP and HTTPS (Secure) Settings</title> - <mediaobject> - <imageobject> - <imagedata fileref="proxy2.jpg" format="jpg"> - </imageobject> - <textobject> - <phrase>[ Screenshot of IE Proxy Configuration ]</phrase> - </textobject> - </mediaobject> - </figure> - </para> - - -<para> - After doing this, flush your browser's disk and memory caches to force a - re-reading of all pages and to get rid of any ads that may be cached. Remove - any <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink>, - if you want <application>Privoxy</application> to manage that. You are now - ready to start enjoying the benefits of using - <application>Privoxy</application>! -</para> - -<para> - <application>Privoxy</application> itself is typically started by specifying the - main configuration file to be used on the command line. If no configuration - file is specified on the command line, <application>Privoxy</application> - will look for a file named <filename>config</filename> in the current - directory. Except on Win32 where it will try <filename>config.txt</filename>. -</para> - -<sect2 id="start-redhat"> -<title>Red Hat and Fedora</title> -<para> - A default Red Hat installation may not start &my-app; upon boot. It will use - the file <filename>/etc/privoxy/config</filename> as its main configuration - file. -</para> -<para> - <screen> - # /etc/rc.d/init.d/privoxy start -</screen> -</para> -<para> - Or ... -</para> -<para> - <screen> - # service privoxy start -</screen> -</para> -</sect2> - -<sect2 id="start-debian"> -<title>Debian</title> -<para> - We use a script. Note that Debian typically starts &my-app; upon booting per - default. It will use the file - <filename>/etc/privoxy/config</filename> as its main configuration - file. -</para> -<para> - <screen> - # /etc/init.d/privoxy start -</screen> -</para> -</sect2> - -<sect2 id="start-windows"> -<title>Windows</title> -<para> -Click on the &my-app; Icon to start <application>Privoxy</application>. If no configuration file is - specified on the command line, <application>Privoxy</application> will look - for a file named <filename>config.txt</filename>. Note that Windows will - automatically start &my-app; when the system starts if you chose that option - when installing. -</para> -<para> - <application>Privoxy</application> can run with full Windows service functionality. - On Windows only, the &my-app; program has two new command line arguments - to install and uninstall &my-app; as a service. See the - <link linkend="installation-pack-win">Windows Installation - instructions</link> for details. -</para> -</sect2> - -<sect2 id="start-unices"> -<title>Solaris, NetBSD, FreeBSD, HP-UX and others</title> -<para> -Example Unix startup command: -</para> -<para> - <screen> - # /usr/sbin/privoxy /etc/privoxy/config -</screen> -</para> -</sect2> - -<sect2 id="start-os2"> -<title>OS/2</title> -<para> - During installation, <application>Privoxy</application> is configured to - start automatically when the system restarts. You can start it manually by - double-clicking on the <application>Privoxy</application> icon in the - <application>Privoxy</application> folder. -</para> -</sect2> - -<sect2 id="start-macosx"> -<title>Mac OS X</title> -<para> - After downloading the privoxy software, unzip the downloaded file by - double-clicking on the zip file icon. Then, double-click on the - installer package icon and follow the installation process. -</para> -<para> - The privoxy service will automatically start after a successful - installation. In addition, the privoxy service will automatically - start every time your computer starts up. -</para> -<para> - To prevent the privoxy service from automatically starting when your - computer starts up, remove or rename the folder named - /Library/StartupItems/Privoxy. -</para> -<para> - A simple application named Privoxy Utility has been created which - enables administrators to easily start and stop the privoxy service. -</para> -<para> - In addition, the Privoxy Utility presents a simple way for - administrators to edit the various privoxy config files. A method - to uninstall the software is also available. -</para> -<para> - An administrator username and password must be supplied in order for - the Privoxy Utility to perform any of the tasks. -</para> -</sect2> - - -<sect2 id="start-amigaos"> -<title>AmigaOS</title> -<para> - Start <application>Privoxy</application> (with RUN <>NIL:) in your - <filename>startnet</filename> script (AmiTCP), in - <filename>s:user-startup</filename> (RoadShow), as startup program in your - startup script (Genesis), or as startup action (Miami and MiamiDx). - <application>Privoxy</application> will automatically quit when you quit your - TCP/IP stack (just ignore the harmless warning your TCP/IP stack may display that - <application>Privoxy</application> is still running). -</para> -</sect2> - -<sect2 id="start-gentoo"> -<title>Gentoo</title> -<para> - A script is again used. It will use the file <filename>/etc/privoxy/config - </filename> as its main configuration file. -</para> -<para> - <screen> - /etc/init.d/privoxy start - </screen> -</para> -<para> - Note that <application>Privoxy</application> is not automatically started at - boot time by default. You can change this with the <literal>rc-update</literal> - command. -</para> -<para> - <screen> - rc-update add privoxy default - </screen> -</para> -</sect2> - - - - -<sect2 id="cmdoptions"> -<title>Command Line Options</title> -<para> - <application>Privoxy</application> may be invoked with the following - command-line options: -</para> - -<para> - <itemizedlist> - - <listitem> - <para> - <emphasis>--version</emphasis> - </para> - <para> - Print version info and exit. Unix only. - </para> - </listitem> - <listitem> - <para> - <emphasis>--help</emphasis> - </para> - <para> - Print short usage info and exit. Unix only. - </para> - </listitem> - <listitem> - <para> - <emphasis>--no-daemon</emphasis> - </para> - <para> - Don't become a daemon, i.e. don't fork and become process group - leader, and don't detach from controlling tty. Unix only. - </para> - </listitem> - <listitem> - <para> - <emphasis>--pidfile FILE</emphasis> - </para> - <para> - On startup, write the process ID to <emphasis>FILE</emphasis>. Delete the - <emphasis>FILE</emphasis> on exit. Failure to create or delete the - <emphasis>FILE</emphasis> is non-fatal. If no <emphasis>FILE</emphasis> - option is given, no PID file will be used. Unix only. - </para> - </listitem> - <listitem> - <para> - <emphasis>--user USER[.GROUP]</emphasis> - </para> - <para> - After (optionally) writing the PID file, assume the user ID of - <emphasis>USER</emphasis>, and if included the GID of GROUP. Exit if the - privileges are not sufficient to do so. Unix only. - </para> - </listitem> - <listitem> - <para> - <emphasis>--chroot</emphasis> - </para> - <para> - Before changing to the user ID given in the <emphasis>--user</emphasis> option, - chroot to that user's home directory, i.e. make the kernel pretend to the &my-app; - process that the directory tree starts there. If set up carefully, this can limit - the impact of possible vulnerabilities in &my-app; to the files contained in that hierarchy. - Unix only. - </para> - </listitem> - <listitem> - <para> - <emphasis>--pre-chroot-nslookup hostname</emphasis> - </para> - <para> - Specifies a hostname to look up before doing a chroot. On some systems, initializing the - resolver library involves reading config files from /etc and/or loading additional shared - libraries from /lib. On these systems, doing a hostname lookup before the chroot reduces - the number of files that must be copied into the chroot tree. - </para> - <para> - For fastest startup speed, a good value is a hostname that is not in /etc/hosts but that - your local name server (listed in /etc/resolv.conf) can resolve without recursion - (that is, without having to ask any other name servers). The hostname need not exist, - but if it doesn't, an error message (which can be ignored) will be output. - </para> - </listitem> - - <listitem> - <para> - <emphasis>configfile</emphasis> - </para> - <para> - If no <emphasis>configfile</emphasis> is included on the command line, - <application>Privoxy</application> will look for a file named - <quote>config</quote> in the current directory (except on Win32 - where it will look for <quote>config.txt</quote> instead). Specify - full path to avoid confusion. If no config file is found, - <application>Privoxy</application> will fail to start. - </para> - </listitem> - - </itemizedlist> -</para> - -<para> - On <application>MS Windows</application> only there are two additional - command-line options to allow <application>Privoxy</application> to install and - run as a <emphasis>service</emphasis>. See the -<link linkend="installation-pack-win">Window Installation section</link> -for details. -</para> - -</sect2> - -</sect1> - - - - - -<sect1 id="configuration"><title>Privoxy Configuration</title> - <para> - All <application>Privoxy</application> configuration is stored - in text files. These files can be edited with a text editor. - Many important aspects of <application>Privoxy</application> can - also be controlled easily with a web browser. - </para> - - - - -<sect2> -<title>Controlling Privoxy with Your Web Browser</title> -<para> - <application>Privoxy</application>'s user interface can be reached through the special - URL <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink> - (shortcut: <ulink url="http://p.p/">http://p.p/</ulink>), - which is a built-in page and works without Internet access. - You will see the following section: - -</para> - - -<screen> - <msgtext> - <bridgehead renderas="sect2">    Privoxy Menu</bridgehead> - - <simplelist> - <member> -         &squf;  <ulink url="http://config.privoxy.org/show-status">View & change the current configuration</ulink> - </member> - <member> -         &squf;  <ulink url="http://config.privoxy.org/show-version">View the source code version numbers</ulink> - </member> - <member> -         &squf;  <ulink url="http://config.privoxy.org/show-request">View the request headers.</ulink> - </member> - <member> -         &squf;  <ulink url="http://config.privoxy.org/show-url-info">Look up which actions apply to a URL and why</ulink> - </member> - <member> -         &squf;  <ulink url="http://config.privoxy.org/toggle">Toggle Privoxy on or off</ulink> - </member> - <member> -         &squf;  <ulink - url="http://www.privoxy.org/&p-version;/user-manual/">Documentation</ulink> - </member> - </simplelist> - </msgtext> -</screen> - - -<para> - This should be self-explanatory. Note the first item leads to an editor for the - <link linkend="actions-file">actions files</link>, which is where the ad, banner, - cookie, and URL blocking magic is configured as well as other advanced features of - <application>Privoxy</application>. This is an easy way to adjust various - aspects of <application>Privoxy</application> configuration. The actions - file, and other configuration files, are explained in detail below. -</para> - -<para> - <quote>Toggle Privoxy On or Off</quote> is handy for sites that might - have problems with your current actions and filters. You can in fact use - it as a test to see whether it is <application>Privoxy</application> - causing the problem or not. <application>Privoxy</application> continues - to run as a proxy in this case, but all manipulation is disabled, i.e. - <application>Privoxy</application> acts like a normal forwarding proxy. There - is even a toggle <link linkend="bookmarklets">Bookmarklet</link> offered, so - that you can toggle <application>Privoxy</application> with one click from - your browser. -</para> - -<para> - Note that several of the features described above are disabled by default - in <application>Privoxy</application> 3.0.7 beta and later. - Check the - <ulink url="config.html">configuration file</ulink> to learn why - and in which cases it's safe to enable them again. -</para> - -</sect2> - - - - - - - - -<sect2 id="confoverview"> -<title>Configuration Files Overview</title> -<para> - For Unix, *BSD and Linux, all configuration files are located in - <filename>/etc/privoxy/</filename> by default. For MS Windows, OS/2, and - AmigaOS these are all in the same directory as the - <application>Privoxy</application> executable. <![%p-not-stable;[ The name - and number of configuration files has changed from previous versions, and is - subject to change as development progresses.]]> -</para> - -<para> - The installed defaults provide a reasonable starting point, though - some settings may be aggressive by some standards. For the time being, the - principle configuration files are: -</para> - -<para> - <itemizedlist> - - <listitem> - <para> - The <link linkend="config">main configuration file</link> is named <filename>config</filename> - on Linux, Unix, BSD, OS/2, and AmigaOS and <filename>config.txt</filename> - on Windows. This is a required file. - </para> - </listitem> - - <listitem> - <para> - <filename>match-all.action</filename> is used to define which <quote>actions</quote> - relating to banner-blocking, images, pop-ups, content modification, cookie handling - etc should be applied by default. It should be the first actions file loaded. - </para> - <para> - <filename>default.action</filename> defines many exceptions (both positive and negative) - from the default set of actions that's configured in <filename>match-all.action</filename>. - It should be the second actions file loaded and shouldn't be edited by the user. - </para> - <para> - Multiple actions files may be defined in <filename>config</filename>. These - are processed in the order they are defined. Local customizations and locally - preferred exceptions to the default policies as defined in - <filename>match-all.action</filename> (which you will most probably want - to define sooner or later) are best applied in <filename>user.action</filename>, - where you can preserve them across upgrades. The file isn't installed by all - installers, but you can easily create it yourself with a text editor. - </para> - <para> - There is also a web based editor that can be accessed from - <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink> - (Shortcut: <ulink - url="http://p.p/show-status">http://p.p/show-status</ulink>) for the - various actions files. - </para> - </listitem> - - <listitem> - <para> - <quote>Filter files</quote> (the <link linkend="filter-file">filter - file</link>) can be used to re-write the raw page content, including - viewable text as well as embedded HTML and JavaScript, and whatever else - lurks on any given web page. The filtering jobs are only pre-defined here; - whether to apply them or not is up to the actions files. - <filename>default.filter</filename> includes various filters made - available for use by the developers. Some are much more intrusive than - others, and all should be used with caution. You may define additional - filter files in <filename>config</filename> as you can with - actions files. We suggest <filename>user.filter</filename> for any - locally defined filters or customizations. - </para> - </listitem> - - </itemizedlist> -</para> - -<para> - The syntax of the configuration and filter files may change between different - Privoxy versions, unfortunately some enhancements cost backwards compatibility. -  -</para> - -<para> - All files use the <quote><literal>#</literal></quote> character to denote a - comment (the rest of the line will be ignored) and understand line continuation - through placing a backslash ("<literal>\</literal>") as the very last character - in a line. If the <literal>#</literal> is preceded by a backslash, it looses - its special function. Placing a <literal>#</literal> in front of an otherwise - valid configuration line to prevent it from being interpreted is called "commenting - out" that line. Blank lines are ignored. -</para> - -<para> - The actions files and filter files - can use Perl style <link linkend="regex">regular expressions</link> for - maximum flexibility. -</para> - -<para> - After making any changes, there is no need to restart - <application>Privoxy</application> in order for the changes to take - effect. <application>Privoxy</application> detects such changes - automatically. Note, however, that it may take one or two additional - requests for the change to take effect. When changing the listening address - of <application>Privoxy</application>, these <quote>wake up</quote> requests - must obviously be sent to the <emphasis>old</emphasis> listening address. -</para> - -<![%p-not-stable;[ -<para> - While under development, the configuration content is subject to change. - The below documentation may not be accurate by the time you read this. - Also, what constitutes a <quote>default</quote> setting, may change, so - please check all your configuration files on important issues. -</para> -]]> - -</sect2> -</sect1> - - - - - - - - - &config; - - - - - - - - - -<sect1 id="actions-file"><title>Actions Files</title> - - - -<para> - The actions files are used to define what <emphasis>actions</emphasis> - <application>Privoxy</application> takes for which URLs, and thus determines - how ad images, cookies and various other aspects of HTTP content and - transactions are handled, and on which sites (or even parts thereof). - There are a number of such actions, with a wide range of functionality. - Each action does something a little different. - These actions give us a veritable arsenal of tools with which to exert - our control, preferences and independence. Actions can be combined so that - their effects are aggregated when applied against a given set of URLs. -</para> -<para> - There - are three action files included with <application>Privoxy</application> with - differing purposes: -</para> -<para> - <itemizedlist> - <listitem> - <para> - <filename>match-all.action</filename> - is used to define which - <quote>actions</quote> relating to banner-blocking, images, pop-ups, - content modification, cookie handling etc should be applied by default. - It should be the first actions file loaded - </para> - </listitem> - <listitem> - <para> - <filename>default.action</filename> - defines many exceptions (both - positive and negative) from the default set of actions that's configured - in <filename>match-all.action</filename>. It is a set of rules that should - work reasonably well as-is for most users. This file is only supposed to - be edited by the developers. It should be the second actions file loaded. - </para> - </listitem> - <listitem> - <para> - <filename>user.action</filename> - is intended to be for local site - preferences and exceptions. As an example, if your ISP or your bank - has specific requirements, and need special handling, this kind of - thing should go here. This file will not be upgraded. - </para> - </listitem> - <listitem> - <para> - <guibutton>Edit</guibutton> <guibutton>Set to Cautious</guibutton> <guibutton>Set to Medium</guibutton> <guibutton>Set to Advanced</guibutton> - </para> - <para> - These have increasing levels of aggressiveness <emphasis>and have no - influence on your browsing unless you select them explicitly in the - editor</emphasis>. A default installation should be pre-set to - <literal>Cautious</literal>. New users should try this for a while before - adjusting the settings to more aggressive levels. The more aggressive - the settings, then the more likelihood there is of problems such as sites - not working as they should. - </para> - <para> - The <guibutton>Edit</guibutton> button allows you to turn each - action on/off individually for fine-tuning. The <guibutton>Cautious</guibutton> - button changes the actions list to low/safe settings which will activate - ad blocking and a minimal set of &my-app;'s features, and subsequently - there will be less of a chance for accidental problems. The - <guibutton>Medium</guibutton> button sets the list to a medium level of - other features and a low level set of privacy features. The - <guibutton>Advanced</guibutton> button sets the list to a high level of - ad blocking and medium level of privacy. See the chart below. The latter - three buttons over-ride any changes via with the - <guibutton>Edit</guibutton> button. More fine-tuning can be done in the - lower sections of this internal page. - </para> - <para> - While the actions file editor allows to enable these settings in all - actions files, they are only supposed to be enabled in the first one - to make sure you don't unintentionally overrule earlier rules. - </para> - <para> - The default profiles, and their associated actions, as pre-defined in - <filename>default.action</filename> are: - </para> - <para> - <table frame=all><title>Default Configurations</title> - <tgroup cols=4 align=left colsep=1 rowsep=1> - <colspec colname=c1> - <colspec colname=c2> - <colspec colname=c3> - <colspec colname=c4> - <thead> - <row> - <entry>Feature</entry> - <entry>Cautious</entry> - <entry>Medium</entry> - <entry>Advanced</entry> - </row> - </thead> -  -  -  -  -  -  -  -  - <tbody> - - <row> - <entry>Ad-blocking Aggressiveness</entry> - <entry>medium</entry> - <entry>high</entry> - <entry>high</entry> - </row> - - <row> - <entry>Ad-filtering by size</entry> - <entry>no</entry> - <entry>yes</entry> - <entry>yes</entry> - </row> - - <row> - <entry>Ad-filtering by link</entry> - <entry>no</entry> - <entry>no</entry> - <entry>yes</entry> - </row> - <row> - <entry>Pop-up killing</entry> - <entry>blocks only</entry> - <entry>blocks only</entry> - <entry>blocks only</entry> - </row> - - <row> - <entry>Privacy Features</entry> - <entry>low</entry> - <entry>medium</entry> - <entry>medium/high</entry> - </row> - - <row> - <entry>Cookie handling</entry> - <entry>none</entry> - <entry>session-only</entry> - <entry>kill</entry> - </row> - - <row> - <entry>Referer forging</entry> - <entry>no</entry> - <entry>yes</entry> - <entry>yes</entry> - </row> - - <row> - <entry>GIF de-animation</entry> - <entry>no</entry> - <entry>yes</entry> - <entry>yes</entry> - </row> - - <row> - <entry>Fast redirects</entry> - <entry>no</entry> - <entry>no</entry> - <entry>yes</entry> - </row> - - <row> - <entry>HTML taming</entry> - <entry>no</entry> - <entry>no</entry> - <entry>yes</entry> - </row> - - <row> - <entry>JavaScript taming</entry> - <entry>no</entry> - <entry>no</entry> - <entry>yes</entry> - </row> - - <row> - <entry>Web-bug killing</entry> - <entry>no</entry> - <entry>yes</entry> - <entry>yes</entry> - </row> - - <row> - <entry>Image tag reordering</entry> - <entry>no</entry> - <entry>yes</entry> - <entry>yes</entry> - </row> - - </tbody> - </tgroup> - </table> - </para> - - </listitem> - </itemizedlist> -</para> - -<para> - The list of actions files to be used are defined in the main configuration - file, and are processed in the order they are defined (e.g. - <filename>default.action</filename> is typically processed before - <filename>user.action</filename>). The content of these can all be viewed and - edited from <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>. - The over-riding principle when applying actions, is that the last action that - matches a given URL wins. The broadest, most general rules go first - (defined in <filename>default.action</filename>), - followed by any exceptions (typically also in - <filename>default.action</filename>), which are then followed lastly by any - local preferences (typically in <emphasis>user</emphasis><filename>.action</filename>). - Generally, <filename>user.action</filename> has the last word. - </para> - -<para> - An actions file typically has multiple sections. If you want to use - <quote>aliases</quote> in an actions file, you have to place the (optional) - <link linkend="aliases">alias section</link> at the top of that file. - Then comes the default set of rules which will apply universally to all - sites and pages (be <emphasis>very careful</emphasis> with using such a - universal set in <filename>user.action</filename> or any other actions file after - <filename>default.action</filename>, because it will override the result - from consulting any previous file). And then below that, - exceptions to the defined universal policies. You can regard - <filename>user.action</filename> as an appendix to <filename>default.action</filename>, - with the advantage that it is a separate file, which makes preserving your - personal settings across <application>Privoxy</application> upgrades easier. -</para> - -<para> - Actions can be used to block anything you want, including ads, banners, or - just some obnoxious URL whose content you would rather not see. Cookies can be accepted - or rejected, or accepted only during the current browser session (i.e. not - written to disk), content can be modified, some JavaScripts tamed, user-tracking - fooled, and much more. See below for a <link linkend="actions">complete list - of actions</link>. -</para> - - -<sect2> -<title>Finding the Right Mix</title> -<para> - Note that some <link linkend="actions">actions</link>, like cookie suppression - or script disabling, may render some sites unusable that rely on these - techniques to work properly. Finding the right mix of actions is not always easy and - certainly a matter of personal taste. And, things can always change, requiring - refinements in the configuration. In general, it can be said that the more - <quote>aggressive</quote> your default settings (in the top section of the - actions file) are, the more exceptions for <quote>trusted</quote> sites you - will have to make later. If, for example, you want to crunch all cookies per - default, you'll have to make exceptions from that rule for sites that you - regularly use and that require cookies for actually useful purposes, like maybe - your bank, favorite shop, or newspaper. -</para> - -<para> - We have tried to provide you with reasonable rules to start from in the - distribution actions files. But there is no general rule of thumb on these - things. There just are too many variables, and sites are constantly changing. - Sooner or later you will want to change the rules (and read this chapter again :). -</para> -</sect2> - - -<sect2> -<title>How to Edit</title> -<para> - The easiest way to edit the actions files is with a browser by - using our browser-based editor, which can be reached from <ulink - url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>. - Note: the config file option <link - linkend="enable-edit-actions">enable-edit-actions</link> must be enabled for - this to work. The editor allows both fine-grained control over every single - feature on a per-URL basis, and easy choosing from wholesale sets of defaults - like <quote>Cautious</quote>, <quote>Medium</quote> or - <quote>Advanced</quote>. Warning: the <quote>Advanced</quote> setting is more - aggressive, and will be more likely to cause problems for some sites. - Experienced users only! - </para> - -<para> - If you prefer plain text editing to GUIs, you can of course also directly edit the - the actions files with your favorite text editor. Look at - <filename>default.action</filename> which is richly commented with many - good examples. -</para> -</sect2> - - -<sect2 id="actions-apply"> -<title>How Actions are Applied to Requests</title> -<para> - Actions files are divided into sections. There are special sections, - like the <quote><link linkend="aliases">alias</link></quote> sections which will - be discussed later. For now let's concentrate on regular sections: They have a - heading line (often split up to multiple lines for readability) which consist - of a list of actions, separated by whitespace and enclosed in curly braces. - Below that, there is a list of URL and tag patterns, each on a separate line. -</para> - -<para> - To determine which actions apply to a request, the URL of the request is - compared to all URL patterns in each <quote>action file</quote>. - Every time it matches, the list of applicable actions for the request is - incrementally updated, using the heading of the section in which the - pattern is located. The same is done again for tags and tag patterns later on. -</para> - -<para> - If multiple applying sections set the same action differently, - the last match wins. If not, the effects are aggregated. - E.g. a URL might match a regular section with a heading line of <literal>{ - +<link linkend="handle-as-image">handle-as-image</link> }</literal>, - then later another one with just <literal>{ - +<link linkend="block">block</link> }</literal>, resulting - in <emphasis>both</emphasis> actions to apply. And there may well be - cases where you will want to combine actions together. Such a section then - might look like: -</para> - - <para> - <screen> - { +<literal>handle-as-image</literal> +<literal>block{Banner ads.}</literal> } - # Block these as if they were images. Send no block page. - banners.example.com - media.example.com/.*banners - .example.com/images/ads/</screen> - </para> - -<para> - You can trace this process for URL patterns and any given URL by visiting <ulink - url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink>. -</para> - -<para> - Examples and more detail on this is provided in the Appendix, <link linkend="ACTIONSANAT"> - Troubleshooting: Anatomy of an Action</link> section. -</para> -</sect2> - - -<sect2 id="af-patterns"> -<title>Patterns</title> -<para> - As mentioned, <application>Privoxy</application> uses <quote>patterns</quote> - to determine what <emphasis>actions</emphasis> might apply to which sites and - pages your browser attempts to access. These <quote>patterns</quote> use wild - card type <emphasis>pattern</emphasis> matching to achieve a high degree of - flexibility. This allows one expression to be expanded and potentially match - against many similar patterns. -</para> - -<para> - Generally, an URL pattern has the form - <literal><domain>/<path></literal>, where both the - <literal><domain></literal> and <literal><path></literal> are - optional. (This is why the special <literal>/</literal> pattern matches all - URLs). Note that the protocol portion of the URL pattern (e.g. - <literal>http://</literal>) should <emphasis>not</emphasis> be included in - the pattern. This is assumed already! -</para> -<para> - The pattern matching syntax is different for the domain and path parts of - the URL. The domain part uses a simple globbing type matching technique, - while the path part uses more flexible - <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular - Expressions</quote></ulink> (POSIX 1003.2). -</para> - -<variablelist> - <varlistentry> - <term><literal>www.example.com/</literal></term> - <listitem> - <para> - is a domain-only pattern and will match any request to <literal>www.example.com</literal>, - regardless of which document on that server is requested. So ALL pages in - this domain would be covered by the scope of this action. Note that a - simple <literal>example.com</literal> is different and would NOT match. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>www.example.com</literal></term> - <listitem> - <para> - means exactly the same. For domain-only patterns, the trailing <literal>/</literal> may - be omitted. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>www.example.com/index.html</literal></term> - <listitem> - <para> - matches all the documents on <literal>www.example.com</literal> - whose name starts with <literal>/index.html</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>www.example.com/index.html$</literal></term> - <listitem> - <para> - matches only the single document <literal>/index.html</literal> - on <literal>www.example.com</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>/index.html$</literal></term> - <listitem> - <para> - matches the document <literal>/index.html</literal>, regardless of the domain, - i.e. on <emphasis>any</emphasis> web server anywhere. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>index.html</literal></term> - <listitem> - <para> - matches nothing, since it would be interpreted as a domain name and - there is no top-level domain called <literal>.html</literal>. So its - a mistake. - </para> - </listitem> - </varlistentry> -</variablelist> - - - -<sect3><title>The Domain Pattern</title> - -<para> - The matching of the domain part offers some flexible options: if the - domain starts or ends with a dot, it becomes unanchored at that end. - For example: -</para> - -<variablelist> - <varlistentry> - <term><literal>.example.com</literal></term> - <listitem> - <para> - matches any domain with first-level domain <literal>com</literal> - and second-level domain <literal>example</literal>. - For example <literal>www.example.com</literal>, - <literal>example.com</literal> and <literal>foo.bar.baz.example.com</literal>. - Note that it wouldn't match if the second-level domain was <literal>another-example</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>www.</literal></term> - <listitem> - <para> - matches any domain that <emphasis>STARTS</emphasis> with - <literal>www.</literal> (It also matches the domain - <literal>www</literal> but most of the time that doesn't matter.) - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>.example.</literal></term> - <listitem> - <para> - matches any domain that <emphasis>CONTAINS</emphasis> <literal>.example.</literal>. - And, by the way, also included would be any files or documents that exist - within that domain since no path limitations are specified. (Correctly - speaking: It matches any FQDN that contains <literal>example</literal> as - a domain.) This might be <literal>www.example.com</literal>, - <literal>news.example.de</literal>, or - <literal>www.example.net/cgi/testing.pl</literal> for instance. All these - cases are matched. - </para> - </listitem> - </varlistentry> -</variablelist> - -<para> - Additionally, there are wild-cards that you can use in the domain names - themselves. These work similarly to shell globbing type wild-cards: - <quote>*</quote> represents zero or more arbitrary characters (this is - equivalent to the - <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular - Expression</quote></ulink> based syntax of <quote>.*</quote>), - <quote>?</quote> represents any single character (this is equivalent to the - regular expression syntax of a simple <quote>.</quote>), and you can define - <quote>character classes</quote> in square brackets which is similar to - the same regular expression technique. All of this can be freely mixed: -</para> - -<variablelist> - <varlistentry> - <term><literal>ad*.example.com</literal></term> - <listitem> - <para> - matches <quote>adserver.example.com</quote>, - <quote>ads.example.com</quote>, etc but not <quote>sfads.example.com</quote> - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>*ad*.example.com</literal></term> - <listitem> - <para> - matches all of the above, and then some. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>.?pix.com</literal></term> - <listitem> - <para> - matches <literal>www.ipix.com</literal>, - <literal>pictures.epix.com</literal>, <literal>a.b.c.d.e.upix.com</literal> etc. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>www[1-9a-ez].example.c*</literal></term> - <listitem> - <para> - matches <literal>www1.example.com</literal>, - <literal>www4.example.cc</literal>, <literal>wwwd.example.cy</literal>, - <literal>wwwz.example.com</literal> etc., but <emphasis>not</emphasis> - <literal>wwww.example.com</literal>. - </para> - </listitem> - </varlistentry> -</variablelist> - -<para> - While flexible, this is not the sophistication of full regular expression based syntax. -</para> - -</sect3> - - - - - -<sect3><title>The Path Pattern</title> - -<para> - <application>Privoxy</application> uses <quote>modern</quote> POSIX 1003.2 - <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular - Expressions</quote></ulink> for matching the path portion (after the slash), - and is thus more flexible. -</para> - -<para> - There is an <link linkend="regex">Appendix</link> with a brief quick-start into regular - expressions, you also might want to have a look at your operating system's documentation - on regular expressions (try <literal>man re_format</literal>). -</para> - -<para> - Note that the path pattern is automatically left-anchored at the <quote>/</quote>, - i.e. it matches as if it would start with a <quote>^</quote> (regular expression speak - for the beginning of a line). -</para> - -<para> - Please also note that matching in the path is <emphasis>CASE INSENSITIVE</emphasis> - by default, but you can switch to case sensitive at any point in the pattern by using the - <quote>(?-i)</quote> switch: <literal>www.example.com/(?-i)PaTtErN.*</literal> will match - only documents whose path starts with <literal>PaTtErN</literal> in - <emphasis>exactly</emphasis> this capitalization. -</para> - -<variablelist> - <varlistentry> - <term><literal>.example.com/.*</literal></term> - <listitem> - <para> - Is equivalent to just <quote>.example.com</quote>, since any documents - within that domain are matched with or without the <quote>.*</quote> - regular expression. This is redundant - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>.example.com/.*/index.html$</literal></term> - <listitem> - <para> - Will match any page in the domain of <quote>example.com</quote> that is - named <quote>index.html</quote>, and that is part of some path. For - example, it matches <quote>www.example.com/testing/index.html</quote> but - NOT <quote>www.example.com/index.html</quote> because the regular - expression called for at least two <quote>/'s</quote>, thus the path - requirement. It also would match - <quote>www.example.com/testing/index_html</quote>, because of the - special meta-character <quote>.</quote>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>.example.com/(.*/)?index\.html$</literal></term> - <listitem> - <para> - This regular expression is conditional so it will match any page - named <quote>index.html</quote> regardless of path which in this case can - have one or more <quote>/'s</quote>. And this one must contain exactly - <quote>.html</quote> (but does not have to end with that!). - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>.example.com/(.*/)(ads|banners?|junk)</literal></term> - <listitem> - <para> - This regular expression will match any path of <quote>example.com</quote> - that contains any of the words <quote>ads</quote>, <quote>banner</quote>, - <quote>banners</quote> (because of the <quote>?</quote>) or <quote>junk</quote>. - The path does not have to end in these words, just contain them. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>.example.com/(.*/)(ads|banners?|junk)/.*\.(jpe?g|gif|png)$</literal></term> - <listitem> - <para> - This is very much the same as above, except now it must end in either - <quote>.jpg</quote>, <quote>.jpeg</quote>, <quote>.gif</quote> or <quote>.png</quote>. So this - one is limited to common image formats. - </para> - </listitem> - </varlistentry> - -</variablelist> -<para> - There are many, many good examples to be found in <filename>default.action</filename>, - and more tutorials below in <link linkend="regex">Appendix on regular expressions</link>. -</para> - -</sect3> - - - - - -<sect3 id="tag-pattern"><title>The Tag Pattern</title> - -<para> - Tag patterns are used to change the applying actions based on the - request's tags. Tags can be created with either the - <link linkend="CLIENT-HEADER-TAGGER">client-header-tagger</link> - or the <link linkend="SERVER-HEADER-TAGGER">server-header-tagger</link> action. -</para> - -<para> - Tag patterns have to start with <quote>TAG:</quote>, so &my-app; - can tell them apart from URL patterns. Everything after the colon - including white space, is interpreted as a regular expression with - path pattern syntax, except that tag patterns aren't left-anchored - automatically (&my-app; doesn't silently add a <quote>^</quote>, - you have to do it yourself if you need it). -</para> - -<para> - To match all requests that are tagged with <quote>foo</quote> - your pattern line should be <quote>TAG:^foo$</quote>, - <quote>TAG:foo</quote> would work as well, but it would also - match requests whose tags contain <quote>foo</quote> somewhere. - <quote>TAG: foo</quote> wouldn't work as it requires white space. -</para> - -<para> - Sections can contain URL and tag patterns at the same time, - but tag patterns are checked after the URL patterns and thus - always overrule them, even if they are located before the URL patterns. -</para> - -<para> - Once a new tag is added, Privoxy checks right away if it's matched by one - of the tag patterns and updates the action settings accordingly. As a result - tags can be used to activate other tagger actions, as long as these other - taggers look for headers that haven't already be parsed. -</para> - -<para> - For example you could tag client requests which use the - <literal>POST</literal> method, - then use this tag to activate another tagger that adds a tag if cookies - are sent, and then use a block action based on the cookie tag. This allows - the outcome of one action, to be input into a subsequent action. However if - you'd reverse the position of the described taggers, and activated the - method tagger based on the cookie tagger, no method tags would be created. - The method tagger would look for the request line, but at the time - the cookie tag is created, the request line has already been parsed. -</para> - -<para> - While this is a limitation you should be aware of, this kind of - indirection is seldom needed anyway and even the example doesn't - make too much sense. -</para> - -</sect3> - -</sect2> - - - - - - -<sect2 id="actions"> -<title>Actions</title> -<para> - All actions are disabled by default, until they are explicitly enabled - somewhere in an actions file. Actions are turned on if preceded with a - <quote>+</quote>, and turned off if preceded with a <quote>-</quote>. So a - <literal>+action</literal> means <quote>do that action</quote>, e.g. - <literal>+block</literal> means <quote>please block URLs that match the - following patterns</quote>, and <literal>-block</literal> means <quote>don't - block URLs that match the following patterns, even if <literal>+block</literal> - previously applied.</quote> - -</para> - -<para> - Again, actions are invoked by placing them on a line, enclosed in curly braces and - separated by whitespace, like in - <literal>{+some-action -some-other-action{some-parameter}}</literal>, - followed by a list of URL patterns, one per line, to which they apply. - Together, the actions line and the following pattern lines make up a section - of the actions file. -</para> - -<para> - Actions fall into three categories: -</para> - -<para> - <itemizedlist> - <listitem> - <para> - Boolean, i.e the action can only be <quote>enabled</quote> or - <quote>disabled</quote>. Syntax: - </para> - <para> - <screen> - +<replaceable class="function">name</replaceable> # enable action <replaceable class="parameter">name</replaceable> - -<replaceable class="function">name</replaceable> # disable action <replaceable class="parameter">name</replaceable></screen> - </para> - <para> - Example: <literal>+handle-as-image</literal> - </para> - </listitem> - - - <listitem> - <para> - Parameterized, where some value is required in order to enable this type of action. - Syntax: - </para> - <para> - <screen> - +<replaceable class="function">name</replaceable>{<replaceable class="parameter">param</replaceable>} # enable action and set parameter to <replaceable class="parameter">param</replaceable>, - # overwriting parameter from previous match if necessary - -<replaceable class="function">name</replaceable> # disable action. The parameter can be omitted</screen> - </para> - <para> - Note that if the URL matches multiple positive forms of a parameterized action, - the last match wins, i.e. the params from earlier matches are simply ignored. - </para> - <para> - Example: <literal>+hide-user-agent{Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.4) Gecko/20070602 Firefox/2.0.0.4}</literal> - </para> - </listitem> - - <listitem> - <para> - Multi-value. These look exactly like parameterized actions, - but they behave differently: If the action applies multiple times to the - same URL, but with different parameters, <emphasis>all</emphasis> the parameters - from <emphasis>all</emphasis> matches are remembered. This is used for actions - that can be executed for the same request repeatedly, like adding multiple - headers, or filtering through multiple filters. Syntax: - </para> - <para> - <screen> - +<replaceable class="function">name</replaceable>{<replaceable class="parameter">param</replaceable>} # enable action and add <replaceable class="parameter">param</replaceable> to the list of parameters - -<replaceable class="function">name</replaceable>{<replaceable class="parameter">param</replaceable>} # remove the parameter <replaceable class="parameter">param</replaceable> from the list of parameters - # If it was the last one left, disable the action. - <replaceable class="parameter">-name</replaceable> # disable this action completely and remove all parameters from the list</screen> - </para> - <para> - Examples: <literal>+add-header{X-Fun-Header: Some text}</literal> and - <literal>+filter{html-annoyances}</literal> - </para> - </listitem> - - </itemizedlist> -</para> - -<para> - If nothing is specified in any actions file, no <quote>actions</quote> are - taken. So in this case <application>Privoxy</application> would just be a - normal, non-blocking, non-filtering proxy. You must specifically enable the - privacy and blocking features you need (although the provided default actions - files will give a good starting point). -</para> - -<para> - Later defined action sections always over-ride earlier ones of the same type. - So exceptions to any rules you make, should come in the latter part of the file (or - in a file that is processed later when using multiple actions files such - as <filename>user.action</filename>). For multi-valued actions, the actions - are applied in the order they are specified. Actions files are processed in - the order they are defined in <filename>config</filename> (the default - installation has three actions files). It also quite possible for any given - URL to match more than one <quote>pattern</quote> (because of wildcards and - regular expressions), and thus to trigger more than one set of actions! Last - match wins. -</para> - - -<para> - The list of valid <application>Privoxy</application> actions are: -</para> - - - - - - - - - - - -<sect3 renderas="sect4" id="add-header"> -<title>add-header</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Confuse log analysis, custom applications</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Sends a user defined HTTP header to the web server. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Multi-value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Any string value is possible. Validity of the defined HTTP headers is not checked. - It is recommended that you use the <quote><literal>X-</literal></quote> prefix - for custom headers. - </para> - </listitem> - </varlistentry> - -<varlistentry> - <term>Notes:</term> - <listitem> - <para> - This action may be specified multiple times, in order to define multiple - headers. This is rarely needed for the typical user. If you don't know what - <quote>HTTP headers</quote> are, you definitely don't need to worry about this - one. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+add-header{X-User-Tracking: sucks}</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="block"> -<title>block</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Block ads or other unwanted content</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Requests for URLs to which this action applies are blocked, i.e. the - requests are trapped by &my-app; and the requested URL is never retrieved, - but is answered locally with a substitute page or image, as determined by - the <literal><link - linkend="handle-as-image">handle-as-image</link></literal>, - <literal><link - linkend="set-image-blocker">set-image-blocker</link></literal>, and - <literal><link - linkend="handle-as-empty-document">handle-as-empty-document</link></literal> actions. - - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para>A block reason that should be given to the user.</para> - </listitem> - </varlistentry> - -<varlistentry> - <term>Notes:</term> - <listitem> - <para> - <application>Privoxy</application> sends a special <quote>BLOCKED</quote> page - for requests to blocked pages. This page contains the block reason given as - parameter, a link to find out why the block action applies, and a click-through - to the blocked content (the latter only if the force feature is available and - enabled). - </para> - <para> - A very important exception occurs if <emphasis>both</emphasis> - <literal>block</literal> and <literal><link linkend="handle-as-image">handle-as-image</link></literal>, - apply to the same request: it will then be replaced by an image. If - <literal><link linkend="set-image-blocker">set-image-blocker</link></literal> - (see below) also applies, the type of image will be determined by its parameter, - if not, the standard checkerboard pattern is sent. - </para> - <para> - It is important to understand this process, in order - to understand how <application>Privoxy</application> deals with - ads and other unwanted content. Blocking is a core feature, and one - upon which various other features depend. - </para> - <para> - The <literal><link linkend="filter">filter</link></literal> - action can perform a very similar task, by <quote>blocking</quote> - banner images and other content through rewriting the relevant URLs in the - document's HTML source, so they don't get requested in the first place. - Note that this is a totally different technique, and it's easy to confuse the two. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen>{+block{No nasty stuff for you.}} -# Block and replace with "blocked" page - .nasty-stuff.example.com - -{+block{Doubleclick banners.} +handle-as-image} -# Block and replace with image - .ad.doubleclick.net - .ads.r.us/banners/ - -{+block{Layered ads.} +handle-as-empty-document} -# Block and then ignore - adserver.example.net/.*\.js$</screen> - </para> - </listitem> - </varlistentry> - - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="change-x-forwarded-for"> -<title>change-x-forwarded-for</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Improve privacy by not forwarding the source of the request in the HTTP headers.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes the <quote>X-Forwarded-For:</quote> HTTP header from the client request, - or adds a new one. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <itemizedlist> - <listitem> - <para><quote>block</quote> to delete the header.</para> - </listitem> - <listitem> - <para> - <quote>add</quote> to create the header (or append - the client's IP address to an already existing one). - </para> - </listitem> - </itemizedlist> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - It is safe and recommended to use <literal>block</literal>. - </para> - <para> - Forwarding the source address of the request may make - sense in some multi-user setups but is also a privacy risk. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+change-x-forwarded-for{block}</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - -<sect3 renderas="sect4" id="client-header-filter"> -<title>client-header-filter</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Rewrite or remove single client headers. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - All client headers to which this action applies are filtered on-the-fly through - the specified regular expression based substitutions. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - The name of a client-header filter, as defined in one of the - <link linkend="filter-file">filter files</link>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Client-header filters are applied to each header on its own, not to - all at once. This makes it easier to diagnose problems, but on the downside - you can't write filters that only change header x if header y's value is z. - You can do that by using tags though. - </para> - <para> - Client-header filters are executed after the other header actions have finished - and use their output as input. - </para> - <para> - If the request URL gets changed, &my-app; will detect that and use the new - one. This can be used to rewrite the request destination behind the client's - back, for example to specify a Tor exit relay for certain requests. - </para> - <para> - Please refer to the <link linkend="filter-file">filter file chapter</link> - to learn which client-header filters are available by default, and how to - create your own. - </para> - - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen> -# Hide Tor exit notation in Host and Referer Headers -{+client-header-filter{hide-tor-exit-notation}} -/ - </screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="client-header-tagger"> -<title>client-header-tagger</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Block requests based on their headers. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Client headers to which this action applies are filtered on-the-fly through - the specified regular expression based substitutions, the result is used as - tag. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - The name of a client-header tagger, as defined in one of the - <link linkend="filter-file">filter files</link>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Client-header taggers are applied to each header on its own, - and as the header isn't modified, each tagger <quote>sees</quote> - the original. - </para> - <para> - Client-header taggers are the first actions that are executed - and their tags can be used to control every other action. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen> -# Tag every request with the User-Agent header -{+client-header-tagger{user-agent}} -/ - -# Tagging itself doesn't change the action -# settings, sections with TAG patterns do: -# -# If it's a download agent, use a different forwarding proxy, -# show the real User-Agent and make sure resume works. -{+forward-override{forward-socks5 10.0.0.2:2222 .} \ - -hide-if-modified-since \ - -overwrite-last-modified \ - -hide-user-agent \ - -filter \ - -deanimate-gifs \ -} -TAG:^User-Agent: NetBSD-ftp/ -TAG:^User-Agent: Novell ZYPP Installer -TAG:^User-Agent: RPM APT-HTTP/ -TAG:^User-Agent: fetch libfetch/ -TAG:^User-Agent: Ubuntu APT-HTTP/ -TAG:^User-Agent: MPlayer/ - </screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="content-type-overwrite"> -<title>content-type-overwrite</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Stop useless download menus from popping up, or change the browser's rendering mode</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Replaces the <quote>Content-Type:</quote> HTTP server header. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Any string. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The <quote>Content-Type:</quote> HTTP server header is used by the - browser to decide what to do with the document. The value of this - header can cause the browser to open a download menu instead of - displaying the document by itself, even if the document's format is - supported by the browser. - </para> - <para> - The declared content type can also affect which rendering mode - the browser chooses. If XHTML is delivered as <quote>text/html</quote>, - many browsers treat it as yet another broken HTML document. - If it is send as <quote>application/xml</quote>, browsers with - XHTML support will only display it, if the syntax is correct. - </para> - <para> - If you see a web site that proudly uses XHTML buttons, but sets - <quote>Content-Type: text/html</quote>, you can use &my-app; - to overwrite it with <quote>application/xml</quote> and validate - the web master's claim inside your XHTML-supporting browser. - If the syntax is incorrect, the browser will complain loudly. - </para> - <para> - You can also go the opposite direction: if your browser prints - error messages instead of rendering a document falsely declared - as XHTML, you can overwrite the content type with - <quote>text/html</quote> and have it rendered as broken HTML document. - </para> - <para> - By default <literal>content-type-overwrite</literal> only replaces - <quote>Content-Type:</quote> headers that look like some kind of text. - If you want to overwrite it unconditionally, you have to combine it with - <literal><link linkend="force-text-mode">force-text-mode</link></literal>. - This limitation exists for a reason, think twice before circumventing it. - </para> - <para> - Most of the time it's easier to replace this action with a custom - <literal><link linkend="server-header-filter">server-header filter</link></literal>. - It allows you to activate it for every document of a certain site and it will still - only replace the content types you aimed at. - </para> - <para> - Of course you can apply <literal>content-type-overwrite</literal> - to a whole site and then make URL based exceptions, but it's a lot - more work to get the same precision. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (sections):</term> - <listitem> - <para> - <screen># Check if www.example.net/ really uses valid XHTML -{ +content-type-overwrite{application/xml} } -www.example.net/ - -# but leave the content type unmodified if the URL looks like a style sheet -{-content-type-overwrite} -www.example.net/.*\.css$ -www.example.net/.*style -</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="crunch-client-header"> - -<title>crunch-client-header</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Remove a client header <application>Privoxy</application> has no dedicated action for.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes every header sent by the client that contains the string the user supplied as parameter. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Any string. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This action allows you to block client headers for which no dedicated - <application>Privoxy</application> action exists. - <application>Privoxy</application> will remove every client header that - contains the string you supplied as parameter. - </para> - <para> - Regular expressions are <emphasis>not supported</emphasis> and you can't - use this action to block different headers in the same request, unless - they contain the same string. - </para> - <para> - <literal>crunch-client-header</literal> is only meant for quick tests. - If you have to block several different headers, or only want to modify - parts of them, you should use a - <literal><link linkend="client-header-filter">client-header filter</link></literal>. - </para> - <warning> - <para> - Don't block any header without understanding the consequences. - </para> - </warning> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen># Block the non-existent "Privacy-Violation:" client header -{ +crunch-client-header{Privacy-Violation:} } -/ - </screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="crunch-if-none-match"> -<title>crunch-if-none-match</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Prevent yet another way to track the user's steps between sessions.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes the <quote>If-None-Match:</quote> HTTP client header. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Removing the <quote>If-None-Match:</quote> HTTP client header - is useful for filter testing, where you want to force a real - reload instead of getting status code <quote>304</quote> which - would cause the browser to use a cached copy of the page. - </para> - <para> - It is also useful to make sure the header isn't used as a cookie - replacement (unlikely but possible). - </para> - <para> - Blocking the <quote>If-None-Match:</quote> header shouldn't cause any - caching problems, as long as the <quote>If-Modified-Since:</quote> header - isn't blocked or missing as well. - </para> - <para> - It is recommended to use this action together with - <literal><link linkend="hide-if-modified-since">hide-if-modified-since</link></literal> - and - <literal><link linkend="overwrite-last-modified">overwrite-last-modified</link></literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen># Let the browser revalidate cached documents but don't -# allow the server to use the revalidation headers for user tracking. -{+hide-if-modified-since{-60} \ - +overwrite-last-modified{randomize} \ - +crunch-if-none-match} -/ </screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="crunch-incoming-cookies"> -<title>crunch-incoming-cookies</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Prevent the web server from setting HTTP cookies on your system - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes any <quote>Set-Cookie:</quote> HTTP headers from server replies. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This action is only concerned with <emphasis>incoming</emphasis> HTTP cookies. For - <emphasis>outgoing</emphasis> HTTP cookies, use - <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal>. - Use <emphasis>both</emphasis> to disable HTTP cookies completely. - </para> - <para> - It makes <emphasis>no sense at all</emphasis> to use this action in conjunction - with the <literal><link linkend="session-cookies-only">session-cookies-only</link></literal> action, - since it would prevent the session cookies from being set. See also - <literal><link linkend="filter-content-cookies">filter-content-cookies</link></literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+crunch-incoming-cookies</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="crunch-server-header"> -<title>crunch-server-header</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Remove a server header <application>Privoxy</application> has no dedicated action for.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes every header sent by the server that contains the string the user supplied as parameter. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Any string. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This action allows you to block server headers for which no dedicated - <application>Privoxy</application> action exists. <application>Privoxy</application> - will remove every server header that contains the string you supplied as parameter. - </para> - <para> - Regular expressions are <emphasis>not supported</emphasis> and you can't - use this action to block different headers in the same request, unless - they contain the same string. - </para> - <para> - <literal>crunch-server-header</literal> is only meant for quick tests. - If you have to block several different headers, or only want to modify - parts of them, you should use a custom - <literal><link linkend="server-header-filter">server-header filter</link></literal>. - </para> - <warning> - <para> - Don't block any header without understanding the consequences. - </para> - </warning> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen># Crunch server headers that try to prevent caching -{ +crunch-server-header{no-cache} } -/ </screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="crunch-outgoing-cookies"> -<title>crunch-outgoing-cookies</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Prevent the web server from reading any HTTP cookies from your system - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes any <quote>Cookie:</quote> HTTP headers from client requests. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This action is only concerned with <emphasis>outgoing</emphasis> HTTP cookies. For - <emphasis>incoming</emphasis> HTTP cookies, use - <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal>. - Use <emphasis>both</emphasis> to disable HTTP cookies completely. - </para> - <para> - It makes <emphasis>no sense at all</emphasis> to use this action in conjunction - with the <literal><link linkend="session-cookies-only">session-cookies-only</link></literal> action, - since it would prevent the session cookies from being read. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+crunch-outgoing-cookies</screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="deanimate-gifs"> -<title>deanimate-gifs</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Stop those annoying, distracting animated GIF images.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - De-animate GIF animations, i.e. reduce them to their first or last image. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - <quote>last</quote> or <quote>first</quote> - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This will also shrink the images considerably (in bytes, not pixels!). If - the option <quote>first</quote> is given, the first frame of the animation - is used as the replacement. If <quote>last</quote> is given, the last - frame of the animation is used instead, which probably makes more sense for - most banner animations, but also has the risk of not showing the entire - last frame (if it is only a delta to an earlier frame). - </para> - <para> - You can safely use this action with patterns that will also match non-GIF - objects, because no attempt will be made at anything that doesn't look like - a GIF. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+deanimate-gifs{last}</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - -<sect3 renderas="sect4" id="downgrade-http-version"> -<title>downgrade-http-version</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Work around (very rare) problems with HTTP/1.1</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Downgrades HTTP/1.1 client requests and server replies to HTTP/1.0. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - -<varlistentry> - <term>Notes:</term> - <listitem> - <para> - This is a left-over from the time when <application>Privoxy</application> - didn't support important HTTP/1.1 features well. It is left here for the - unlikely case that you experience HTTP/1.1 related problems with some server - out there. Not all HTTP/1.1 features and requirements are supported yet, - so there is a chance you might need this action. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen>{+downgrade-http-version} -problem-host.example.com</screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - -<sect3 renderas="sect4" id="fast-redirects"> -<title>fast-redirects</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Fool some click-tracking scripts and speed up indirect links.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Detects redirection URLs and redirects the browser without contacting - the redirection server first. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <itemizedlist> - <listitem> - <para> - <quote>simple-check</quote> to just search for the string <quote>http://</quote> - to detect redirection URLs. - </para> - </listitem> - <listitem> - <para> - <quote>check-decoded-url</quote> to decode URLs (if necessary) before searching - for redirection URLs. - </para> - </listitem> - </itemizedlist> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Many sites, like yahoo.com, don't just link to other sites. Instead, they - will link to some script on their own servers, giving the destination as a - parameter, which will then redirect you to the final target. URLs - resulting from this scheme typically look like: - <quote>http://www.example.org/click-tracker.cgi?target=http%3a//www.example.net/</quote>. - </para> - <para> - Sometimes, there are even multiple consecutive redirects encoded in the - URL. These redirections via scripts make your web browsing more traceable, - since the server from which you follow such a link can see where you go - to. Apart from that, valuable bandwidth and time is wasted, while your - browser asks the server for one redirect after the other. Plus, it feeds - the advertisers. - </para> - <para> - This feature is currently not very smart and is scheduled for improvement. - If it is enabled by default, you will have to create some exceptions to - this action. It can lead to failures in several ways: - </para> - <para> - Not every URLs with other URLs as parameters is evil. - Some sites offer a real service that requires this information to work. - For example a validation service needs to know, which document to validate. - <literal>fast-redirects</literal> assumes that every URL parameter that - looks like another URL is a redirection target, and will always redirect to - the last one. Most of the time the assumption is correct, but if it isn't, - the user gets redirected anyway. - </para> - <para> - Another failure occurs if the URL contains other parameters after the URL parameter. - The URL: - <quote>http://www.example.org/?redirect=http%3a//www.example.net/&foo=bar</quote>. - contains the redirection URL <quote>http://www.example.net/</quote>, - followed by another parameter. <literal>fast-redirects</literal> doesn't know that - and will cause a redirect to <quote>http://www.example.net/&foo=bar</quote>. - Depending on the target server configuration, the parameter will be silently ignored - or lead to a <quote>page not found</quote> error. You can prevent this problem by - first using the <literal><link linkend="redirect">redirect</link></literal> action - to remove the last part of the URL, but it requires a little effort. - </para> - <para> - To detect a redirection URL, <literal>fast-redirects</literal> only - looks for the string <quote>http://</quote>, either in plain text - (invalid but often used) or encoded as <quote>http%3a//</quote>. - Some sites use their own URL encoding scheme, encrypt the address - of the target server or replace it with a database id. In theses cases - <literal>fast-redirects</literal> is fooled and the request reaches the - redirection server where it probably gets logged. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen> - { +fast-redirects{simple-check} } - one.example.com - - { +fast-redirects{check-decoded-url} } - another.example.com/testing</screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="filter"> -<title>filter</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Get rid of HTML and JavaScript annoyances, banner advertisements (by size), - do fun text replacements, add personalized effects, etc.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - All instances of text-based type, most notably HTML and JavaScript, to which - this action applies, can be filtered on-the-fly through the specified regular - expression based substitutions. (Note: as of version 3.0.3 plain text documents - are exempted from filtering, because web servers often use the - <literal>text/plain</literal> MIME type for all files whose type they don't know.) - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - The name of a content filter, as defined in the <link linkend="filter-file">filter file</link>. - Filters can be defined in one or more files as defined by the - <literal><link linkend="filterfile">filterfile</link></literal> - option in the <link linkend="config">config file</link>. - <filename>default.filter</filename> is the collection of filters - supplied by the developers. Locally defined filters should go - in their own file, such as <filename>user.filter</filename>. - </para> - <para> - When used in its negative form, - and without parameters, <emphasis>all</emphasis> filtering is completely disabled. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - For your convenience, there are a number of pre-defined filters available - in the distribution filter file that you can use. See the examples below for - a list. - </para> - <para> - Filtering requires buffering the page content, which may appear to - slow down page rendering since nothing is displayed until all content has - passed the filters. (It does not really take longer, but seems that way - since the page is not incrementally displayed.) This effect will be more - noticeable on slower connections. - </para> - <para> - <quote>Rolling your own</quote> - filters requires a knowledge of - <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular - Expressions</quote></ulink> and - <ulink url="http://en.wikipedia.org/wiki/Html"><quote>HTML</quote></ulink>. - This is very powerful feature, and potentially very intrusive. - Filters should be used with caution, and where an equivalent - <quote>action</quote> is not available. - </para> - <para> - The amount of data that can be filtered is limited to the - <literal><link linkend="buffer-limit">buffer-limit</link></literal> - option in the main <link linkend="config">config file</link>. The - default is 4096 KB (4 Megs). Once this limit is exceeded, the buffered - data, and all pending data, is passed through unfiltered. - </para> - <para> - Inappropriate MIME types, such as zipped files, are not filtered at all. - (Again, only text-based types except plain text). Encrypted SSL data - (from HTTPS servers) cannot be filtered either, since this would violate - the integrity of the secure transaction. In some situations it might - be necessary to protect certain text, like source code, from filtering - by defining appropriate <literal>-filter</literal> exceptions. - </para> - <para> - Compressed content can't be filtered either, unless &my-app; - is compiled with zlib support (requires at least &my-app; 3.0.7), - in which case &my-app; will decompress the content before filtering - it. - </para> - <para> - If you use a &my-app; version without zlib support, but want filtering to work on - as much documents as possible, even those that would normally be sent compressed, - you must use the <literal><link linkend="prevent-compression">prevent-compression</link></literal> - action in conjunction with <literal>filter</literal>. - </para> - <para> - Content filtering can achieve some of the same effects as the - <literal><link linkend="block">block</link></literal> - action, i.e. it can be used to block ads and banners. But the mechanism - works quite differently. One effective use, is to block ad banners - based on their size (see below), since many of these seem to be somewhat - standardized. - </para> - <para> - <link linkend="contact">Feedback</link> with suggestions for new or - improved filters is particularly welcome! - </para> - <para> - The below list has only the names and a one-line description of each - predefined filter. There are <link linkend="predefined-filters">more - verbose explanations</link> of what these filters do in the <link - linkend="filter-file">filter file chapter</link>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (with filters from the distribution <filename>default.filter</filename> file). - See <link linkend="PREDEFINED-FILTERS">the Predefined Filters section</link> for - more explanation on each:</term> - <listitem> - <para> - <anchor id="filter-js-annoyances"> - <screen>+filter{js-annoyances} # Get rid of particularly annoying JavaScript abuse.</screen> - </para> - <para> - <anchor id="filter-js-events"> - <screen>+filter{js-events} # Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).</screen> - </para> - <para> - <anchor id="filter-html-annoyances"> - <screen>+filter{html-annoyances} # Get rid of particularly annoying HTML abuse.</screen> - </para> - <para> - <anchor id="filter-content-cookies"> - <screen>+filter{content-cookies} # Kill cookies that come in the HTML or JS content.</screen> - </para> - <para> - <anchor id="filter-refresh-tags"> - <screen>+filter{refresh-tags} # Kill automatic refresh tags (for dial-on-demand setups).</screen> - </para> - <para> - <anchor id="filter-unsolicited-popups"> - <screen>+filter{unsolicited-popups} # Disable only unsolicited pop-up windows. Useful if your browser lacks this ability.</screen> - </para> - <para> - <anchor id="filter-all-popups"> - <screen>+filter{all-popups} # Kill all popups in JavaScript and HTML. Useful if your browser lacks this ability.</screen> - </para> - <para> - <anchor id="filter-img-reorder"> - <screen>+filter{img-reorder} # Reorder attributes in <img> tags to make the banners-by-* filters more effective.</screen> - </para> - <para> - <anchor id="filter-banners-by-size"> - <screen>+filter{banners-by-size} # Kill banners by size.</screen> - </para> - <para> - <anchor id="filter-banners-by-link"> - <screen>+filter{banners-by-link} # Kill banners by their links to known clicktrackers.</screen> - </para> - <para> - <anchor id="filter-webbugs"> - <screen>+filter{webbugs} # Squish WebBugs (1x1 invisible GIFs used for user tracking).</screen> - </para> - <para> - <anchor id="filter-tiny-textforms"> - <screen>+filter{tiny-textforms} # Extend those tiny textareas up to 40x80 and kill the hard wrap.</screen> - </para> - <para> - <anchor id="filter-jumping-windows"> - <screen>+filter{jumping-windows} # Prevent windows from resizing and moving themselves.</screen> - </para> - <para> - <anchor id="filter-frameset-borders"> - <screen>+filter{frameset-borders} # Give frames a border and make them resizable.</screen> - </para> - <para> - <anchor id="filter-demoronizer"> - <screen>+filter{demoronizer} # Fix MS's non-standard use of standard charsets.</screen> - </para> - <para> - <anchor id="filter-shockwave-flash"> - <screen>+filter{shockwave-flash} # Kill embedded Shockwave Flash objects.</screen> - </para> - <para> - <anchor id="filter-quicktime-kioskmode"> - <screen>+filter{quicktime-kioskmode} # Make Quicktime movies saveable.</screen> - </para> - <para> - <anchor id="filter-fun"> - <screen>+filter{fun} # Text replacements for subversive browsing fun!</screen> - </para> - <para> - <anchor id="filter-crude-parental"> - <screen>+filter{crude-parental} # Crude parental filtering. Note that this filter doesn't work reliably.</screen> - </para> - <para> - <anchor id="filter-ie-exploits"> - <screen>+filter{ie-exploits} # Disable some known Internet Explorer bug exploits.</screen> - </para> - <para> - <anchor id="filter-site-specifics"> - <screen>+filter{site-specifics} # Cure for site-specific problems. Don't apply generally!</screen> - </para> - <para> - <anchor id="filter-no-ping"> - <screen>+filter{no-ping} # Removes non-standard ping attributes in <a> and <area> tags.</screen> - </para> - <para> - <anchor id="filter-google"> - <screen>+filter{google} # CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.</screen> - </para> - <para> - <anchor id="filter-yahoo"> - <screen>+filter{yahoo} # CSS-based block for Yahoo text ads. Also removes a width limitation.</screen> - </para> - <para> - <anchor id="filter-msn"> - <screen>+filter{msn} # CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.</screen> - </para> - <para> - <anchor id="filter-blogspot"> - <screen>+filter{blogspot} # Cleans up some Blogspot blogs. Read the fine print before using this.</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="force-text-mode"> -<title>force-text-mode</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Force <application>Privoxy</application> to treat a document as if it was in some kind of <emphasis>text</emphasis> format. </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Declares a document as text, even if the <quote>Content-Type:</quote> isn't detected as such. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - As explained <literal><link linkend="filter">above</link></literal>, - <application>Privoxy</application> tries to only filter files that are - in some kind of text format. The same restrictions apply to - <literal><link linkend="content-type-overwrite">content-type-overwrite</link></literal>. - <literal>force-text-mode</literal> declares a document as text, - without looking at the <quote>Content-Type:</quote> first. - </para> - <warning> - <para> - Think twice before activating this action. Filtering binary data - with regular expressions can cause file damage. - </para> - </warning> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen> -+force-text-mode - </screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="forward-override"> -<title>forward-override</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Change the forwarding settings based on User-Agent or request origin</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Overrules the forward directives in the configuration file. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Multi-value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <itemizedlist> - <listitem> - <para><quote>forward .</quote> to use a direct connection without any additional proxies.</para> - </listitem> - <listitem> - <para> - <quote>forward 127.0.0.1:8123</quote> to use the HTTP proxy listening at 127.0.0.1 port 8123. - </para> - </listitem> - <listitem> - <para> - <quote>forward-socks4a 127.0.0.1:9050 .</quote> to use the socks4a proxy listening at - 127.0.0.1 port 9050. Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote> - to use a socks4 connection (with local DNS resolution) instead, use <quote>forward-socks5</quote> - for socks5 connections (with remote DNS resolution). - </para> - </listitem> - <listitem> - <para> - <quote>forward-socks4a 127.0.0.1:9050 proxy.example.org:8000</quote> to use the socks4a proxy - listening at 127.0.0.1 port 9050 to reach the HTTP proxy listening at proxy.example.org port 8000. - Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote> to use a socks4 connection - (with local DNS resolution) instead, use <quote>forward-socks5</quote> - for socks5 connections (with remote DNS resolution). - </para> - </listitem> - </itemizedlist> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This action takes parameters similar to the - <link linkend="forwarding">forward</link> directives in the configuration - file, but without the URL pattern. It can be used as replacement, but normally it's only - used in cases where matching based on the request URL isn't sufficient. - </para> - <warning> - <para> - Please read the description for the <link linkend="forwarding">forward</link> directives before - using this action. Forwarding to the wrong people will reduce your privacy and increase the - chances of man-in-the-middle attacks. - </para> - <para> - If the ports are missing or invalid, default values will be used. This might change - in the future and you shouldn't rely on it. Otherwise incorrect syntax causes Privoxy - to exit. - </para> - <para> - Use the <ulink url="http://config.privoxy.org/show-url-info">show-url-info CGI page</ulink> - to verify that your forward settings do what you thought the do. - </para> - </warning> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen> -# Always use direct connections for requests previously tagged as -# <quote>User-Agent: fetch libfetch/2.0</quote> and make sure -# resuming downloads continues to work. -# This way you can continue to use Tor for your normal browsing, -# without overloading the Tor network with your FreeBSD ports updates -# or downloads of bigger files like ISOs. -# Note that HTTP headers are easy to fake and therefore their -# values are as (un)trustworthy as your clients and users. -{+forward-override{forward .} \ - -hide-if-modified-since \ - -overwrite-last-modified \ -} -TAG:^User-Agent: fetch libfetch/2\.0$ - </screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="handle-as-empty-document"> -<title>handle-as-empty-document</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Mark URLs that should be replaced by empty documents <emphasis>if they get blocked</emphasis></para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - This action alone doesn't do anything noticeable. It just marks URLs. - If the <literal><link linkend="block">block</link></literal> action <emphasis>also applies</emphasis>, - the presence or absence of this mark decides whether an HTML <quote>BLOCKED</quote> - page, or an empty document will be sent to the client as a substitute for the blocked content. - The <emphasis>empty</emphasis> document isn't literally empty, but actually contains a single space. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Some browsers complain about syntax errors if JavaScript documents - are blocked with <application>Privoxy's</application> - default HTML page; this option can be used to silence them. - And of course this action can also be used to eliminate the &my-app; - BLOCKED message in frames. - </para> - <para> - The content type for the empty document can be specified with - <literal><link linkend="content-type-overwrite">content-type-overwrite{}</link></literal>, - but usually this isn't necessary. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen># Block all documents on example.org that end with ".js", -# but send an empty document instead of the usual HTML message. -{+block{Blocked JavaScript} +handle-as-empty-document} -example.org/.*\.js$ - </screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="handle-as-image"> -<title>handle-as-image</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Mark URLs as belonging to images (so they'll be replaced by images <emphasis>if they do get blocked</emphasis>, rather than HTML pages)</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - This action alone doesn't do anything noticeable. It just marks URLs as images. - If the <literal><link linkend="block">block</link></literal> action <emphasis>also applies</emphasis>, - the presence or absence of this mark decides whether an HTML <quote>blocked</quote> - page, or a replacement image (as determined by the <literal><link - linkend="set-image-blocker">set-image-blocker</link></literal> action) will be sent to the - client as a substitute for the blocked content. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The below generic example section is actually part of <filename>default.action</filename>. - It marks all URLs with well-known image file name extensions as images and should - be left intact. - </para> - <para> - Users will probably only want to use the handle-as-image action in conjunction with - <literal><link linkend="block">block</link></literal>, to block sources of banners, whose URLs don't - reflect the file type, like in the second example section. - </para> - <para> - Note that you cannot treat HTML pages as images in most cases. For instance, (in-line) ad - frames require an HTML page to be sent, or they won't display properly. - Forcing <literal>handle-as-image</literal> in this situation will not replace the - ad frame with an image, but lead to error messages. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (sections):</term> - <listitem> - <para> - <screen># Generic image extensions: -# -{+handle-as-image} -/.*\.(gif|jpg|jpeg|png|bmp|ico)$ - -# These don't look like images, but they're banners and should be -# blocked as images: -# -{+block{Nasty banners.} +handle-as-image} -nasty-banner-server.example.com/junk.cgi\?output=trash -</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="hide-accept-language"> -<title>hide-accept-language</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Pretend to use different language settings.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes or replaces the <quote>Accept-Language:</quote> HTTP header in client requests. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Keyword: <quote>block</quote>, or any user defined value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Faking the browser's language settings can be useful to make a - foreign User-Agent set with - <literal><link linkend="hide-user-agent">hide-user-agent</link></literal> - more believable. - </para> - <para> - However some sites with content in different languages check the - <quote>Accept-Language:</quote> to decide which one to take by default. - Sometimes it isn't possible to later switch to another language without - changing the <quote>Accept-Language:</quote> header first. - </para> - <para> - Therefore it's a good idea to either only change the - <quote>Accept-Language:</quote> header to languages you understand, - or to languages that aren't wide spread. - </para> - <para> - Before setting the <quote>Accept-Language:</quote> header - to a rare language, you should consider that it helps to - make your requests unique and thus easier to trace. - If you don't plan to change this header frequently, - you should stick to a common language. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen># Pretend to use Canadian language settings. -{+hide-accept-language{en-ca} \ -+hide-user-agent{Mozilla/5.0 (X11; U; OpenBSD i386; en-CA; rv:1.8.0.4) Gecko/20060628 Firefox/1.5.0.4} \ -} -/ </screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="hide-content-disposition"> -<title>hide-content-disposition</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Prevent download menus for content you prefer to view inside the browser.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes or replaces the <quote>Content-Disposition:</quote> HTTP header set by some servers. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Keyword: <quote>block</quote>, or any user defined value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Some servers set the <quote>Content-Disposition:</quote> HTTP header for - documents they assume you want to save locally before viewing them. - The <quote>Content-Disposition:</quote> header contains the file name - the browser is supposed to use by default. - </para> - <para> - In most browsers that understand this header, it makes it impossible to - <emphasis>just view</emphasis> the document, without downloading it first, - even if it's just a simple text file or an image. - </para> - <para> - Removing the <quote>Content-Disposition:</quote> header helps - to prevent this annoyance, but some browsers additionally check the - <quote>Content-Type:</quote> header, before they decide if they can - display a document without saving it first. In these cases, you have - to change this header as well, before the browser stops displaying - download menus. - </para> - <para> - It is also possible to change the server's file name suggestion - to another one, but in most cases it isn't worth the time to set - it up. - </para> - <para> - This action will probably be removed in the future, - use server-header filters instead. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen># Disarm the download link in Sourceforge's patch tracker -{ -filter \ - +content-type-overwrite{text/plain}\ - +hide-content-disposition{block} } - .sourceforge.net/tracker/download\.php</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="hide-if-modified-since"> -<title>hide-if-modified-since</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Prevent yet another way to track the user's steps between sessions.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes the <quote>If-Modified-Since:</quote> HTTP client header or modifies its value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Keyword: <quote>block</quote>, or a user defined value that specifies a range of hours. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Removing this header is useful for filter testing, where you want to force a real - reload instead of getting status code <quote>304</quote>, which would cause the - browser to use a cached copy of the page. - </para> - <para> - Instead of removing the header, <literal>hide-if-modified-since</literal> can - also add or subtract a random amount of time to/from the header's value. - You specify a range of minutes where the random factor should be chosen from and - <application>Privoxy</application> does the rest. A negative value means - subtracting, a positive value adding. - </para> - <para> - Randomizing the value of the <quote>If-Modified-Since:</quote> makes - it less likely that the server can use the time as a cookie replacement, - but you will run into caching problems if the random range is too high. - </para> - <para> - It is a good idea to only use a small negative value and let - <literal><link linkend="overwrite-last-modified">overwrite-last-modified</link></literal> - handle the greater changes. - </para> - <para> - It is also recommended to use this action together with - <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>, - otherwise it's more or less pointless. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen># Let the browser revalidate but make tracking based on the time less likely. -{+hide-if-modified-since{-60} \ - +overwrite-last-modified{randomize} \ - +crunch-if-none-match} -/</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="hide-from-header"> -<title>hide-from-header</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Keep your (old and ill) browser from telling web servers your email address</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes any existing <quote>From:</quote> HTTP header, or replaces it with the - specified string. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Keyword: <quote>block</quote>, or any user defined value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The keyword <quote>block</quote> will completely remove the header - (not to be confused with the <literal><link linkend="block">block</link></literal> - action). - </para> - <para> - Alternately, you can specify any value you prefer to be sent to the web - server. If you do, it is a matter of fairness not to use any address that - is actually used by a real person. - </para> - <para> - This action is rarely needed, as modern web browsers don't send - <quote>From:</quote> headers anymore. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+hide-from-header{block}</screen> or - <screen>+hide-from-header{spam-me-senseless(a)sittingduck.example.com}</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="hide-referrer"> -<title>hide-referrer</title> -<anchor id="hide-referer"> -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Conceal which link you followed to get to a particular site</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes the <quote>Referer:</quote> (sic) HTTP header from the client request, - or replaces it with a forged one. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <itemizedlist> - <listitem> - <para><quote>conditional-block</quote> to delete the header completely if the host has changed.</para> - </listitem> - <listitem> - <para><quote>conditional-forge</quote> to forge the header if the host has changed.</para> - </listitem> - <listitem> - <para><quote>block</quote> to delete the header unconditionally.</para> - </listitem> - <listitem> - <para><quote>forge</quote> to pretend to be coming from the homepage of the server we are talking to.</para> - </listitem> - <listitem> - <para>Any other string to set a user defined referrer.</para> - </listitem> - </itemizedlist> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - <literal>conditional-block</literal> is the only parameter, - that isn't easily detected in the server's log file. If it blocks the - referrer, the request will look like the visitor used a bookmark or - typed in the address directly. - </para> - <para> - Leaving the referrer unmodified for requests on the same host - allows the server owner to see the visitor's <quote>click path</quote>, - but in most cases she could also get that information by comparing - other parts of the log file: for example the User-Agent if it isn't - a very common one, or the user's IP address if it doesn't change between - different requests. - </para> - <para> - Always blocking the referrer, or using a custom one, can lead to - failures on servers that check the referrer before they answer any - requests, in an attempt to prevent their content from being - embedded or linked to elsewhere. - </para> - <para> - Both <literal>conditional-block</literal> and <literal>forge</literal> - will work with referrer checks, as long as content and valid referring page - are on the same host. Most of the time that's the case. - </para> - <para> - <literal>hide-referer</literal> is an alternate spelling of - <literal>hide-referrer</literal> and the two can be can be freely - substituted with each other. (<quote>referrer</quote> is the - correct English spelling, however the HTTP specification has a bug - it - requires it to be spelled as <quote>referer</quote>.) - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+hide-referrer{forge}</screen> or - <screen>+hide-referrer{http://www.yahoo.com/}</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="hide-user-agent"> -<title>hide-user-agent</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Try to conceal your type of browser and client operating system</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Replaces the value of the <quote>User-Agent:</quote> HTTP header - in client requests with the specified value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - Any user-defined string. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <warning> - <para> - This can lead to problems on web sites that depend on looking at this header in - order to customize their content for different browsers (which, by the - way, is <emphasis>NOT</emphasis> the right thing to do: good web sites - work browser-independently). - </para> - </warning> - <para> - Using this action in multi-user setups or wherever different types of - browsers will access the same <application>Privoxy</application> is - <emphasis>not recommended</emphasis>. In single-user, single-browser - setups, you might use it to delete your OS version information from - the headers, because it is an invitation to exploit known bugs for your - OS. It is also occasionally useful to forge this in order to access - sites that won't let you in otherwise (though there may be a good - reason in some cases). Example of this: some MSN sites will not - let <application>Mozilla</application> enter, yet forging to a - <application>Netscape 6.1</application> user-agent works just fine. - (Must be just a silly MS goof, I'm sure :-). - </para> - <para> - More information on known user-agent strings can be found at - <ulink url="http://www.user-agents.org/">http://www.user-agents.org/</ulink> - and - <ulink url="http://en.wikipedia.org/wiki/User_agent">http://en.wikipedia.org/wiki/User_agent</ulink>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+hide-user-agent{Netscape 6.1 (X11; I; Linux 2.4.18 i686)}</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="limit-connect"> -<title>limit-connect</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Prevent abuse of <application>Privoxy</application> as a TCP proxy relay or disable SSL for untrusted sites</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Specifies to which ports HTTP CONNECT requests are allowable. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - A comma-separated list of ports or port ranges (the latter using dashes, with the minimum - defaulting to 0 and the maximum to 65K). - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - By default, i.e. if no <literal>limit-connect</literal> action applies, - <application>Privoxy</application> allows HTTP CONNECT requests to all - ports. Use <literal>limit-connect</literal> if fine-grained control - is desired for some or all destinations. - </para> - <para> - The CONNECT methods exists in HTTP to allow access to secure websites - (<quote>https://</quote> URLs) through proxies. It works very simply: - the proxy connects to the server on the specified port, and then - short-circuits its connections to the client and to the remote server. - This means CONNECT-enabled proxies can be used as TCP relays very easily. - </para> - <para> - <application>Privoxy</application> relays HTTPS traffic without seeing - the decoded content. Websites can leverage this limitation to circumvent &my-app;'s - filters. By specifying an invalid port range you can disable HTTPS entirely. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usages:</term> - <listitem> -  -  -  - <para> - <screen>+limit-connect{443} # Port 443 is OK. -+limit-connect{80,443} # Ports 80 and 443 are OK. -+limit-connect{-3, 7, 20-100, 500-} # Ports less than 3, 7, 20 to 100 and above 500 are OK. -+limit-connect{-} # All ports are OK -+limit-connect{,} # No HTTPS/SSL traffic is allowed</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - -<sect3 renderas="sect4" id="prevent-compression"> -<title>prevent-compression</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Ensure that servers send the content uncompressed, so it can be - passed through <literal><link linkend="filter">filter</link></literal>s. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Removes the Accept-Encoding header which can be used to ask for compressed transfer. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - More and more websites send their content compressed by default, which - is generally a good idea and saves bandwidth. But the <literal><link - linkend="filter">filter</link></literal> and - <literal><link linkend="deanimate-gifs">deanimate-gifs</link></literal> - actions need access to the uncompressed data. - </para> - <para> - When compiled with zlib support (available since &my-app; 3.0.7), content that should be - filtered is decompressed on-the-fly and you don't have to worry about this action. - If you are using an older &my-app; version, or one that hasn't been compiled with zlib - support, this action can be used to convince the server to send the content uncompressed. - </para> - <para> - Most text-based instances compress very well, the size is seldom decreased by less than 50%, - for markup-heavy instances like news feeds saving more than 90% of the original size isn't - unusual. - </para> - <para> - Not using compression will therefore slow down the transfer, and you should only - enable this action if you really need it. As of &my-app; 3.0.7 it's disabled in all - predefined action settings. - </para> - <para> - Note that some (rare) ill-configured sites don't handle requests for uncompressed - documents correctly. Broken PHP applications tend to send an empty document body, - some IIS versions only send the beginning of the content. If you enable - <literal>prevent-compression</literal> per default, you might want to add - exceptions for those sites. See the example for how to do that. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (sections):</term> - <listitem> - <para> - <screen> -# Selectively turn off compression, and enable a filter -# -{ +filter{tiny-textforms} +prevent-compression } -# Match only these sites - .google. - sourceforge.net - sf.net - -# Or instead, we could set a universal default: -# -{ +prevent-compression } - / # Match all sites - -# Then maybe make exceptions for broken sites: -# -{ -prevent-compression } -.compusa.com/</screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="overwrite-last-modified"> -<title>overwrite-last-modified</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Prevent yet another way to track the user's steps between sessions.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes the <quote>Last-Modified:</quote> HTTP server header or modifies its value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - One of the keywords: <quote>block</quote>, <quote>reset-to-request-time</quote> - and <quote>randomize</quote> - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Removing the <quote>Last-Modified:</quote> header is useful for filter - testing, where you want to force a real reload instead of getting status - code <quote>304</quote>, which would cause the browser to reuse the old - version of the page. - </para> - <para> - The <quote>randomize</quote> option overwrites the value of the - <quote>Last-Modified:</quote> header with a randomly chosen time - between the original value and the current time. In theory the server - could send each document with a different <quote>Last-Modified:</quote> - header to track visits without using cookies. <quote>Randomize</quote> - makes it impossible and the browser can still revalidate cached documents. - </para> - <para> - <quote>reset-to-request-time</quote> overwrites the value of the - <quote>Last-Modified:</quote> header with the current time. You could use - this option together with - <literal><link linkend="hide-if-modified-since">hide-if-modified-since</link></literal> - to further customize your random range. - </para> - <para> - The preferred parameter here is <quote>randomize</quote>. It is safe - to use, as long as the time settings are more or less correct. - If the server sets the <quote>Last-Modified:</quote> header to the time - of the request, the random range becomes zero and the value stays the same. - Therefore you should later randomize it a second time with - <literal><link linkend="hide-if-modified-since">hided-if-modified-since</link></literal>, - just to be sure. - </para> - <para> - It is also recommended to use this action together with - <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen># Let the browser revalidate without being tracked across sessions -{ +hide-if-modified-since{-60} \ - +overwrite-last-modified{randomize} \ - +crunch-if-none-match} -/</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="redirect"> -<title>redirect</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Redirect requests to other sites. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Convinces the browser that the requested document has been moved - to another location and the browser should get it from there. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - An absolute URL or a single pcrs command. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Requests to which this action applies are answered with a - HTTP redirect to URLs of your choosing. The new URL is - either provided as parameter, or derived by applying a - single pcrs command to the original URL. - </para> - <para> - This action will be ignored if you use it together with - <literal><link linkend="block">block</link></literal>. - It can be combined with - <literal><link linkend="fast-redirects">fast-redirects{check-decoded-url}</link></literal> - to redirect to a decoded version of a rewritten URL. - </para> - <para> - Use this action carefully, make sure not to create redirection loops - and be aware that using your own redirects might make it - possible to fingerprint your requests. - </para> - <para> - In case of problems with your redirects, or simply to watch - them working, enable <link linkend="DEBUG">debug 128</link>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usages:</term> - <listitem> - <para> - <screen># Replace example.com's style sheet with another one -{ +redirect{http://localhost/css-replacements/example.com.css} } - example.com/stylesheet\.css - -# Create a short, easy to remember nickname for a favorite site -# (relies on the browser accept and forward invalid URLs to &my-app;) -{ +redirect{http://www.privoxy.org/user-manual/actions-file.html} } - a - -# Always use the expanded view for Undeadly.org articles -# (Note the $ at the end of the URL pattern to make sure -# the request for the rewritten URL isn't redirected as well) -{+redirect{s@$@&mode=expanded@}} -undeadly.org/cgi\?action=article&sid=\d*$ - -# Redirect Google search requests to MSN -{+redirect{s@^http://[^/]*/search\?q=([^&]*).*@http://search.msn.com/results.aspx?q=$1@}} -.google.com/search - -# Redirect MSN search requests to Yahoo -{+redirect{s@^http://[^/]*/results\.aspx\?q=([^&]*).*@http://search.yahoo.com/search?p=$1@}} -search.msn.com//results\.aspx\?q= - -# Redirect remote requests for this manual -# to the local version delivered by Privoxy -{+redirect{s@^http://www@http://config@}} -www.privoxy.org/user-manual/</screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="server-header-filter"> -<title>server-header-filter</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Rewrite or remove single server headers. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - All server headers to which this action applies are filtered on-the-fly - through the specified regular expression based substitutions. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - The name of a server-header filter, as defined in one of the - <link linkend="filter-file">filter files</link>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Server-header filters are applied to each header on its own, not to - all at once. This makes it easier to diagnose problems, but on the downside - you can't write filters that only change header x if header y's value is z. - You can do that by using tags though. - </para> - <para> - Server-header filters are executed after the other header actions have finished - and use their output as input. - </para> - <para> - Please refer to the <link linkend="filter-file">filter file chapter</link> - to learn which server-header filters are available by default, and how to - create your own. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen> -{+server-header-filter{html-to-xml}} -example.org/xml-instance-that-is-delivered-as-html - -{+server-header-filter{xml-to-html}} -example.org/instance-that-is-delivered-as-xml-but-is-not - </screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="server-header-tagger"> -<title>server-header-tagger</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Enable or disable filters based on the Content-Type header. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Server headers to which this action applies are filtered on-the-fly through - the specified regular expression based substitutions, the result is used as - tag. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - The name of a server-header tagger, as defined in one of the - <link linkend="filter-file">filter files</link>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - Server-header taggers are applied to each header on its own, - and as the header isn't modified, each tagger <quote>sees</quote> - the original. - </para> - <para> - Server-header taggers are executed before all other header actions - that modify server headers. Their tags can be used to control - all of the other server-header actions, the content filters - and the crunch actions (<link linkend="redirect">redirect</link> - and <link linkend="block">block</link>). - </para> - <para> - Obviously crunching based on tags created by server-header taggers - doesn't prevent the request from showing up in the server's log file. - </para> - - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage (section):</term> - <listitem> - <para> - <screen> -# Tag every request with the content type declared by the server -{+server-header-tagger{content-type}} -/ - </screen> - </para> - </listitem> - </varlistentry> - -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="session-cookies-only"> -<title>session-cookies-only</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para> - Allow only temporary <quote>session</quote> cookies (for the current - browser session <emphasis>only</emphasis>). - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - Deletes the <quote>expires</quote> field from <quote>Set-Cookie:</quote> - server headers. Most browsers will not store such cookies permanently and - forget them in between sessions. - </para> - </listitem> - </varlistentry> - -<varlistentry> - <term>Type:</term> -  - <listitem> - <para>Boolean.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <para> - N/A - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - This is less strict than <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal> / - <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal> and allows you to browse - websites that insist or rely on setting cookies, without compromising your privacy too badly. - </para> - <para> - Most browsers will not permanently store cookies that have been processed by - <literal>session-cookies-only</literal> and will forget about them between sessions. - This makes profiling cookies useless, but won't break sites which require cookies so - that you can log in for transactions. This is generally turned on for all - sites, and is the recommended setting. - </para> - <para> - It makes <emphasis>no sense at all</emphasis> to use <literal>session-cookies-only</literal> - together with <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal> or - <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal>. If you do, cookies - will be plainly killed. - </para> - <para> - Note that it is up to the browser how it handles such cookies without an <quote>expires</quote> - field. If you use an exotic browser, you might want to try it out to be sure. - </para> - <para> - This setting also has no effect on cookies that may have been stored - previously by the browser before starting <application>Privoxy</application>. - These would have to be removed manually. - </para> - <para> - <application>Privoxy</application> also uses - the <link linkend="filter-content-cookies">content-cookies filter</link> - to block some types of cookies. Content cookies are not effected by - <literal>session-cookies-only</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - <screen>+session-cookies-only</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3 renderas="sect4" id="set-image-blocker"> -<title>set-image-blocker</title> - -<variablelist> - <varlistentry> - <term>Typical use:</term> - <listitem> - <para>Choose the replacement for blocked images</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Effect:</term> - <listitem> - <para> - This action alone doesn't do anything noticeable. If <emphasis>both</emphasis> - <literal><link linkend="block">block</link></literal> <emphasis>and</emphasis> <literal><link - linkend="handle-as-image">handle-as-image</link></literal> <emphasis>also</emphasis> - apply, i.e. if the request is to be blocked as an image, - <emphasis>then</emphasis> the parameter of this action decides what will be - sent as a replacement. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Type:</term> -  - <listitem> - <para>Parameterized.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Parameter:</term> - <listitem> - <itemizedlist> - <listitem> - <para> - <quote>pattern</quote> to send a built-in checkerboard pattern image. The image is visually - decent, scales very well, and makes it obvious where banners were busted. - </para> - </listitem> - <listitem> - <para> - <quote>blank</quote> to send a built-in transparent image. This makes banners disappear - completely, but makes it hard to detect where <application>Privoxy</application> has blocked - images on a given page and complicates troubleshooting if <application>Privoxy</application> - has blocked innocent images, like navigation icons. - </para> - </listitem> - <listitem> - <para> - <quote><replaceable class="parameter">target-url</replaceable></quote> to - send a redirect to <replaceable class="parameter">target-url</replaceable>. You can redirect - to any image anywhere, even in your local filesystem via <quote>file:///</quote> URL. - (But note that not all browsers support redirecting to a local file system). - </para> - <para> - A good application of redirects is to use special <application>Privoxy</application>-built-in - URLs, which send the built-in images, as <replaceable class="parameter">target-url</replaceable>. - This has the same visual effect as specifying <quote>blank</quote> or <quote>pattern</quote> in - the first place, but enables your browser to cache the replacement image, instead of requesting - it over and over again. - </para> - </listitem> - </itemizedlist> - </listitem> - </varlistentry> - - <varlistentry> - <term>Notes:</term> - <listitem> - <para> - The URLs for the built-in images are <quote>http://config.privoxy.org/send-banner?type=<replaceable - class="parameter">type</replaceable></quote>, where <replaceable class="parameter">type</replaceable> is - either <quote>blank</quote> or <quote>pattern</quote>. - </para> - <para> - There is a third (advanced) type, called <quote>auto</quote>. It is <emphasis>NOT</emphasis> to be - used in <literal>set-image-blocker</literal>, but meant for use from <link linkend="filter-file">filters</link>. - Auto will select the type of image that would have applied to the referring page, had it been an image. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Example usage:</term> - <listitem> - <para> - Built-in pattern: - </para> - <para> - <screen>+set-image-blocker{pattern}</screen> - </para> - <para> - Redirect to the BSD daemon: - </para> - <para> - <screen>+set-image-blocker{http://www.freebsd.org/gifs/dae_up3.gif}</screen> - </para> - <para> - Redirect to the built-in pattern for better caching: - </para> - <para> - <screen>+set-image-blocker{http://config.privoxy.org/send-banner?type=pattern}</screen> - </para> - </listitem> - </varlistentry> -</variablelist> -</sect3> - - - -<sect3> -<title>Summary</title> -<para> - Note that many of these actions have the potential to cause a page to - misbehave, possibly even not to display at all. There are many ways - a site designer may choose to design his site, and what HTTP header - content, and other criteria, he may depend on. There is no way to have hard - and fast rules for all sites. See the <link - linkend="ACTIONSANAT">Appendix</link> for a brief example on troubleshooting - actions. -</para> -</sect3> -</sect2> - - -<sect2 id="aliases"> -<title>Aliases</title> -<para> - Custom <quote>actions</quote>, known to <application>Privoxy</application> - as <quote>aliases</quote>, can be defined by combining other actions. - These can in turn be invoked just like the built-in actions. - Currently, an alias name can contain any character except space, tab, - <quote>=</quote>, - <quote>{</quote> and <quote>}</quote>, but we <emphasis>strongly - recommend</emphasis> that you only use <quote>a</quote> to <quote>z</quote>, - <quote>0</quote> to <quote>9</quote>, <quote>+</quote>, and <quote>-</quote>. - Alias names are not case sensitive, and are not required to start with a - <quote>+</quote> or <quote>-</quote> sign, since they are merely textually - expanded. -</para> -<para> - Aliases can be used throughout the actions file, but they <emphasis>must be - defined in a special section at the top of the file!</emphasis> - And there can only be one such section per actions file. Each actions file may - have its own alias section, and the aliases defined in it are only visible - within that file. -</para> -<para> - There are two main reasons to use aliases: One is to save typing for frequently - used combinations of actions, the other one is a gain in flexibility: If you - decide once how you want to handle shops by defining an alias called - <quote>shop</quote>, you can later change your policy on shops in - <emphasis>one</emphasis> place, and your changes will take effect everywhere - in the actions file where the <quote>shop</quote> alias is used. Calling aliases - by their purpose also makes your actions files more readable. -</para> -<para> - Currently, there is one big drawback to using aliases, though: - <application>Privoxy</application>'s built-in web-based action file - editor honors aliases when reading the actions files, but it expands - them before writing. So the effects of your aliases are of course preserved, - but the aliases themselves are lost when you edit sections that use aliases - with it. -</para> - -<para> - Now let's define some aliases... -</para> - -<para> - <screen> - # Useful custom aliases we can use later. - # - # Note the (required!) section header line and that this section - # must be at the top of the actions file! - # - {{alias}} - - # These aliases just save typing later: - # (Note that some already use other aliases!) - # - +crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link> - -crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link> - +block-as-image = +block{Blocked image.} +handle-as-image - allow-all-cookies = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link> - - # These aliases define combinations of actions - # that are useful for certain types of sites: - # - fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> -<link linkend="PREVENT-COMPRESSION">prevent-compression</link> - - shop = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link> - - # Short names for other aliases, for really lazy people ;-) - # - c0 = +crunch-all-cookies - c1 = -crunch-all-cookies</screen> -</para> - -<para> - ...and put them to use. These sections would appear in the lower part of an - actions file and define exceptions to the default actions (as specified further - up for the <quote>/</quote> pattern): -</para> - -<para> - <screen> - # These sites are either very complex or very keen on - # user data and require minimal interference to work: - # - {fragile} - .office.microsoft.com - .windowsupdate.microsoft.com - # Gmail is really mail.google.com, not gmail.com - mail.google.com - - # Shopping sites: - # Allow cookies (for setting and retrieving your customer data) - # - {shop} - .quietpc.com - .worldpay.com # for quietpc.com - mybank.example.com - - # These shops require pop-ups: - # - {-filter{all-popups} -filter{unsolicited-popups}} - .dabs.com - .overclockers.co.uk</screen> -</para> - -<para> - Aliases like <quote>shop</quote> and <quote>fragile</quote> are typically used for - <quote>problem</quote> sites that require more than one action to be disabled - in order to function properly. -</para> -</sect2> - - -<sect2 id="act-examples"> -<title>Actions Files Tutorial</title> -<para> - The above chapters have shown <link linkend="actions-file">which actions files - there are and how they are organized</link>, how actions are <link - linkend="actions">specified</link> and <link linkend="actions-apply">applied - to URLs</link>, how <link linkend="af-patterns">patterns</link> work, and how to - define and use <link linkend="aliases">aliases</link>. Now, let's look at an - example <filename>match-all.action</filename>, <filename>default.action</filename> - and <filename>user.action</filename> file and see how all these pieces come together: -</para> - -<sect3> -<title>match-all.action</title> -<para> - Remember <emphasis>all actions are disabled when matching starts</emphasis>, - so we have to explicitly enable the ones we want. -</para> - -<para> - While the <filename>match-all.action</filename> file only contains a - single section, it is probably the most important one. It has only one - pattern, <quote><literal>/</literal></quote>, but this pattern - <link linkend="af-patterns">matches all URLs</link>. Therefore, the set of - actions used in this <quote>default</quote> section <emphasis>will - be applied to all requests as a start</emphasis>. It can be partly or - wholly overridden by other actions files like <filename>default.action</filename> - and <filename>user.action</filename>, but it will still be largely responsible - for your overall browsing experience. -</para> - -<para> - Again, at the start of matching, all actions are disabled, so there is - no need to disable any actions here. (Remember: a <quote>+</quote> - preceding the action name enables the action, a <quote>-</quote> disables!). - Also note how this long line has been made more readable by splitting it into - multiple lines with line continuation. -</para> - -<para> - <screen> -{ \ - +<link linkend="CHANGE-X-FORWARDED-FOR">change-x-forwarded-for{block}</link> \ - +<link linkend="HIDE-FROM-HEADER">hide-from-header{block}</link> \ - +<link linkend="SET-IMAGE-BLOCKER">set-image-blocker{pattern}</link> \ -} -/ # Match all URLs - </screen> -</para> - -<para> - The default behavior is now set. -</para> -</sect3> - -<sect3> -<title>default.action</title> - -<para> - If you aren't a developer, there's no need for you to edit the - <filename>default.action</filename> file. It is maintained by - the &my-app; developers and if you disagree with some of the - sections, you should overrule them in your <filename>user.action</filename>. -</para> - -<para> - Understanding the <filename>default.action</filename> file can - help you with your <filename>user.action</filename>, though. -</para> - -<para> - The first section in this file is a special section for internal use - that prevents older &my-app; versions from reading the file: -</para> - -<para> - <screen> -########################################################################## -# Settings -- Don't change! For internal Privoxy use ONLY. -########################################################################## -{{settings}} -for-privoxy-version=3.0.11</screen> -</para> - -<para> - After that comes the (optional) alias section. We'll use the example - section from the above <link linkend="aliases">chapter on aliases</link>, - that also explains why and how aliases are used: -</para> - -<para> - <screen> -########################################################################## -# Aliases -########################################################################## -{{alias}} - - # These aliases just save typing later: - # (Note that some already use other aliases!) - # - +crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link> - -crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link> - +block-as-image = +block{Blocked image.} +handle-as-image - mercy-for-cookies = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link> - - # These aliases define combinations of actions - # that are useful for certain types of sites: - # - fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> - shop = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link></screen> -</para> - -<para> - The first of our specialized sections is concerned with <quote>fragile</quote> - sites, i.e. sites that require minimum interference, because they are either - very complex or very keen on tracking you (and have mechanisms in place that - make them unusable for people who avoid being tracked). We will simply use - our pre-defined <literal>fragile</literal> alias instead of stating the list - of actions explicitly: -</para> - -<para> - <screen> -########################################################################## -# Exceptions for sites that'll break under the default action set: -########################################################################## - -# "Fragile" Use a minimum set of actions for these sites (see alias above): -# -{ fragile } -.office.microsoft.com # surprise, surprise! -.windowsupdate.microsoft.com -mail.google.com</screen> -</para> - -<para> - Shopping sites are not as fragile, but they typically - require cookies to log in, and pop-up windows for shopping - carts or item details. Again, we'll use a pre-defined alias: -</para> - -<para> - <screen> -# Shopping sites: -# -{ shop } -.quietpc.com -.worldpay.com # for quietpc.com -.jungle.com -.scan.co.uk</screen> -</para> - -<para> - The <literal><link linkend="FAST-REDIRECTS">fast-redirects</link></literal> - action, which may have been enabled in <filename>match-all.action</filename>, - breaks some sites. So disable it for popular sites where we know it misbehaves: -</para> - -<para> - <screen> -{ -<link linkend="FAST-REDIRECTS">fast-redirects</link> } -login.yahoo.com -edit.*.yahoo.com -.google.com -.altavista.com/.*(like|url|link):http -.altavista.com/trans.*urltext=http -.nytimes.com</screen> -</para> - -<para> - It is important that <application>Privoxy</application> knows which - URLs belong to images, so that <emphasis>if</emphasis> they are to - be blocked, a substitute image can be sent, rather than an HTML page. - Contacting the remote site to find out is not an option, since it - would destroy the loading time advantage of banner blocking, and it - would feed the advertisers information about you. We can mark any - URL as an image with the <literal><link - linkend="handle-as-image">handle-as-image</link></literal> action, - and marking all URLs that end in a known image file extension is a - good start: -</para> - -<para> - <screen> -########################################################################## -# Images: -########################################################################## - -# Define which file types will be treated as images, in case they get -# blocked further down this file: -# -{ +<link linkend="HANDLE-AS-IMAGE">handle-as-image</link> } -/.*\.(gif|jpe?g|png|bmp|ico)$</screen> -</para> - -<para> - And then there are known banner sources. They often use scripts to - generate the banners, so it won't be visible from the URL that the - request is for an image. Hence we block them <emphasis>and</emphasis> - mark them as images in one go, with the help of our - <literal>+block-as-image</literal> alias defined above. (We could of - course just as well use <literal>+<link linkend="block">block</link> - +<link linkend="handle-as-image">handle-as-image</link></literal> here.) - Remember that the type of the replacement image is chosen by the - <literal><link linkend="set-image-blocker">set-image-blocker</link></literal> - action. Since all URLs have matched the default section with its - <literal>+<link linkend="set-image-blocker">set-image-blocker</link>{pattern}</literal> - action before, it still applies and needn't be repeated: -</para> - -<para> - <screen> -# Known ad generators: -# -{ +block-as-image } -ar.atwola.com -.ad.doubleclick.net -.ad.*.doubleclick.net -.a.yimg.com/(?:(?!/i/).)*$ -.a[0-9].yimg.com/(?:(?!/i/).)*$ -bs*.gsanet.com -.qkimg.net</screen> -</para> - -<para> - One of the most important jobs of <application>Privoxy</application> - is to block banners. Many of these can be <quote>blocked</quote> - by the <literal><link linkend="filter">filter</link>{banners-by-size}</literal> - action, which we enabled above, and which deletes the references to banner - images from the pages while they are loaded, so the browser doesn't request - them anymore, and hence they don't need to be blocked here. But this naturally - doesn't catch all banners, and some people choose not to use filters, so we - need a comprehensive list of patterns for banner URLs here, and apply the - <literal><link linkend="block">block</link></literal> action to them. -</para> -<para> - First comes many generic patterns, which do most of the work, by - matching typical domain and path name components of banners. Then comes - a list of individual patterns for specific sites, which is omitted here - to keep the example short: -</para> - -<para> - <screen> -########################################################################## -# Block these fine banners: -########################################################################## -{ <link linkend="BLOCK">+block{Banner ads.}</link> } - -# Generic patterns: -# -ad*. -.*ads. -banner?. -count*. -/.*count(er)?\.(pl|cgi|exe|dll|asp|php[34]?) -/(?:.*/)?(publicite|werbung|rekla(ma|me|am)|annonse|maino(kset|nta|s)?)/ - -# Site-specific patterns (abbreviated): -# -.hitbox.com</screen> -</para> - -<para> - It's quite remarkable how many advertisers actually call their banner - servers ads.<replaceable>company</replaceable>.com, or call the directory - in which the banners are stored simply <quote>banners</quote>. So the above - generic patterns are surprisingly effective. -</para> -<para> - But being very generic, they necessarily also catch URLs that we don't want - to block. The pattern <literal>.*ads.</literal> e.g. catches - <quote>nasty-<emphasis>ads</emphasis>.nasty-corp.com</quote> as intended, - but also <quote>downlo<emphasis>ads</emphasis>.sourcefroge.net</quote> or - <quote><emphasis>ads</emphasis>l.some-provider.net.</quote> So here come some - well-known exceptions to the <literal>+<link linkend="BLOCK">block</link></literal> - section above. -</para> -<para> - Note that these are exceptions to exceptions from the default! Consider the URL - <quote>downloads.sourcefroge.net</quote>: Initially, all actions are deactivated, - so it wouldn't get blocked. Then comes the defaults section, which matches the - URL, but just deactivates the <literal><link linkend="BLOCK">block</link></literal> - action once again. Then it matches <literal>.*ads.</literal>, an exception to the - general non-blocking policy, and suddenly - <literal><link linkend="BLOCK">+block</link></literal> applies. And now, it'll match - <literal>.*loads.</literal>, where <literal><link linkend="BLOCK">-block</link></literal> - applies, so (unless it matches <emphasis>again</emphasis> further down) it ends up - with no <literal><link linkend="BLOCK">block</link></literal> action applying. -</para> - -<para> - <screen> -########################################################################## -# Save some innocent victims of the above generic block patterns: -########################################################################## - -# By domain: -# -{ -<link linkend="BLOCK">block</link> } -adv[io]*. # (for advogato.org and advice.*) -adsl. # (has nothing to do with ads) -adobe. # (has nothing to do with ads either) -ad[ud]*. # (adult.* and add.*) -.edu # (universities don't host banners (yet!)) -.*loads. # (downloads, uploads etc) - -# By path: -# -/.*loads/ - -# Site-specific: -# -www.globalintersec.com/adv # (adv = advanced) -www.ugu.com/sui/ugu/adv</screen> -</para> - -<para> - Filtering source code can have nasty side effects, - so make an exception for our friends at sourceforge.net, - and all paths with <quote>cvs</quote> in them. Note that - <literal>-<link linkend="FILTER">filter</link></literal> - disables <emphasis>all</emphasis> filters in one fell swoop! -</para> - -<para> - <screen> -# Don't filter code! -# -{ -<link linkend="FILTER">filter</link> } -/(.*/)?cvs -bugzilla. -developer. -wiki. -.sourceforge.net</screen> -</para> - -<para> - The actual <filename>default.action</filename> is of course much more - comprehensive, but we hope this example made clear how it works. -</para> - -</sect3> - -<sect3><title>user.action</title> - -<para> - So far we are painting with a broad brush by setting general policies, - which would be a reasonable starting point for many people. Now, - you might want to be more specific and have customized rules that - are more suitable to your personal habits and preferences. These would - be for narrowly defined situations like your ISP or your bank, and should - be placed in <filename>user.action</filename>, which is parsed after all other - actions files and hence has the last word, over-riding any previously - defined actions. <filename>user.action</filename> is also a - <emphasis>safe</emphasis> place for your personal settings, since - <filename>default.action</filename> is actively maintained by the - <application>Privoxy</application> developers and you'll probably want - to install updated versions from time to time. -</para> - -<para> - So let's look at a few examples of things that one might typically do in - <filename>user.action</filename>: -</para> - - - - -<para> - <screen> -# My user.action file. <fred(a)example.com></screen> -</para> - -<para> - As <link linkend="aliases">aliases</link> are local to the actions - file that they are defined in, you can't use the ones from - <filename>default.action</filename>, unless you repeat them here: -</para> - -<para> - <screen> -# Aliases are local to the file they are defined in. -# (Re-)define aliases for this file: -# -{{alias}} -# -# These aliases just save typing later, and the alias names should -# be self explanatory. -# -+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies --crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies - allow-all-cookies = -crunch-all-cookies -session-cookies-only - allow-popups = -filter{all-popups} -+block-as-image = +block{Blocked as image.} +handle-as-image --block-as-image = -block - -# These aliases define combinations of actions that are useful for -# certain types of sites: -# -fragile = -block -crunch-all-cookies -filter -fast-redirects -hide-referrer -shop = -crunch-all-cookies allow-popups - -# Allow ads for selected useful free sites: -# -allow-ads = -block -filter{banners-by-size} -filter{banners-by-link} - -# Alias for specific file types that are text, but might have conflicting -# MIME types. We want the browser to force these to be text documents. -handle-as-text = -<link linkend="FILTER">filter</link> +-<link linkend="content-type-overwrite">content-type-overwrite{text/plain}</link> +-<link linkend="FORCE-TEXT-MODE">force-text-mode</link> -<link linkend="HIDE-CONTENT-DISPOSITION">hide-content-disposition</link></screen> - -</para> - -<para> - Say you have accounts on some sites that you visit regularly, and - you don't want to have to log in manually each time. So you'd like - to allow persistent cookies for these sites. The - <literal>allow-all-cookies</literal> alias defined above does exactly - that, i.e. it disables crunching of cookies in any direction, and the - processing of cookies to make them only temporary. -</para> - -<para> - <screen> -{ allow-all-cookies } - sourceforge.net - .yahoo.com - .msdn.microsoft.com - .redhat.com</screen> -</para> - -<para> - Your bank is allergic to some filter, but you don't know which, so you disable them all: -</para> - -<para> - <screen> -{ -<link linkend="FILTER">filter</link> } - .your-home-banking-site.com</screen> -</para> - -<para> - Some file types you may not want to filter for various reasons: -</para> - -<para> - <screen> -# Technical documentation is likely to contain strings that might -# erroneously get altered by the JavaScript-oriented filters: -# -.tldp.org -/(.*/)?selfhtml/ - -# And this stupid host sends streaming video with a wrong MIME type, -# so that Privoxy thinks it is getting HTML and starts filtering: -# -stupid-server.example.com/</screen> -</para> - -<para> - Example of a simple <link linkend="BLOCK">block</link> action. Say you've - seen an ad on your favourite page on example.com that you want to get rid of. - You have right-clicked the image, selected <quote>copy image location</quote> - and pasted the URL below while removing the leading http://, into a - <literal>{ +block{} }</literal> section. Note that <literal>{ +handle-as-image - }</literal> need not be specified, since all URLs ending in - <literal>.gif</literal> will be tagged as images by the general rules as set - in default.action anyway: -</para> - -<para> - <screen> -{ +<link linkend="BLOCK">block</link>{Nasty ads.} } - www.example.com/nasty-ads/sponsor\.gif - another.example.net/more/junk/here/</screen> -</para> - -<para> - The URLs of dynamically generated banners, especially from large banner - farms, often don't use the well-known image file name extensions, which - makes it impossible for <application>Privoxy</application> to guess - the file type just by looking at the URL. - You can use the <literal>+block-as-image</literal> alias defined above for - these cases. - Note that objects which match this rule but then turn out NOT to be an - image are typically rendered as a <quote>broken image</quote> icon by the - browser. Use cautiously. -</para> - -<para> - <screen> -{ +block-as-image } - .doubleclick.net - .fastclick.net - /Realmedia/ads/ - ar.atwola.com/</screen> -</para> - -<para> - Now you noticed that the default configuration breaks Forbes Magazine, - but you were too lazy to find out which action is the culprit, and you - were again too lazy to give <link linkend="contact">feedback</link>, so - you just used the <literal>fragile</literal> alias on the site, and - -- <emphasis>whoa!</emphasis> -- it worked. The <literal>fragile</literal> - aliases disables those actions that are most likely to break a site. Also, - good for testing purposes to see if it is <application>Privoxy</application> - that is causing the problem or not. We later find other regular sites - that misbehave, and add those to our personalized list of troublemakers: -</para> - -<para> -<screen> -{ fragile } - .forbes.com - webmail.example.com - .mybank.com</screen> -</para> - -<para> - You like the <quote>fun</quote> text replacements in <filename>default.filter</filename>, - but it is disabled in the distributed actions file. - So you'd like to turn it on in your private, - update-safe config, once and for all: -</para> - -<para> -<screen> -{ +<link linkend="filter-fun">filter{fun}</link> } - / # For ALL sites!</screen> -</para> - -<para> - Note that the above is not really a good idea: There are exceptions - to the filters in <filename>default.action</filename> for things that - really shouldn't be filtered, like code on CVS->Web interfaces. Since - <filename>user.action</filename> has the last word, these exceptions - won't be valid for the <quote>fun</quote> filtering specified here. -</para> - -<para> - You might also worry about how your favourite free websites are - funded, and find that they rely on displaying banner advertisements - to survive. So you might want to specifically allow banners for those - sites that you feel provide value to you: -</para> - -<para> -<screen> -{ allow-ads } - .sourceforge.net - .slashdot.org - .osdn.net</screen> -</para> - -<para> - Note that <literal>allow-ads</literal> has been aliased to - <literal>-<link linkend="block">block</link></literal>, - <literal>-<link linkend="filter-banners-by-size">filter{banners-by-size}</link></literal>, and - <literal>-<link linkend="filter-banners-by-link">filter{banners-by-link}</link></literal> above. -</para> - -<para> - Invoke another alias here to force an over-ride of the MIME type <literal> - application/x-sh</literal> which typically would open a download type - dialog. In my case, I want to look at the shell script, and then I can save - it should I choose to. -</para> - -<para> -<screen> -{ handle-as-text } - /.*\.sh$</screen> -</para> - -<para> - <filename>user.action</filename> is generally the best place to define - exceptions and additions to the default policies of - <filename>default.action</filename>. Some actions are safe to have their - default policies set here though. So let's set a default policy to have a - <quote>blank</quote> image as opposed to the checkerboard pattern for - <emphasis>ALL</emphasis> sites. <quote>/</quote> of course matches all URL - paths and patterns: -</para> - -<para> -<screen> -{ +<link linkend="set-image-blocker">set-image-blocker{blank}</link> } -/ # ALL sites</screen> -</para> - -</sect3> -</sect2> - - - -</sect1> - - - - - -<sect1 id="filter-file"> -<title>Filter Files</title> - -<para> - On-the-fly text substitutions need - to be defined in a <quote>filter file</quote>. Once defined, they - can then be invoked as an <quote>action</quote>. -</para> - -<para> - &my-app; supports three different filter actions: - <literal><link linkend="filter">filter</link></literal> to - rewrite the content that is send to the client, - <literal><link linkend="client-header-filter">client-header-filter</link></literal> - to rewrite headers that are send by the client, and - <literal><link linkend="server-header-filter">server-header-filter</link></literal> - to rewrite headers that are send by the server. -</para> - -<para> - &my-app; also supports two tagger actions: - <literal><link linkend="client-header-tagger">client-header-tagger</link></literal> - and - <literal><link linkend="server-header-tagger">server-header-tagger</link></literal>. - Taggers and filters use the same syntax in the filter files, the difference - is that taggers don't modify the text they are filtering, but use a rewritten - version of the filtered text as tag. The tags can then be used to change the - applying actions through sections with <link linkend="tag-pattern">tag-patterns</link>. -</para> - - -<para> - Multiple filter files can be defined through the <literal> <link - linkend="filterfile">filterfile</link></literal> config directive. The filters - as supplied by the developers are located in - <filename>default.filter</filename>. It is recommended that any locally - defined or modified filters go in a separately defined file such as - <filename>user.filter</filename>. - </para> - -<para> - Common tasks for content filters are to eliminate common annoyances in - HTML and JavaScript, such as pop-up windows, - exit consoles, crippled windows without navigation tools, the - infamous <BLINK> tag etc, to suppress images with certain - width and height attributes (standard banner sizes or web-bugs), - or just to have fun. -</para> - -<para> - Enabled content filters are applied to any content whose - <quote>Content Type</quote> header is recognised as a sign - of text-based content, with the exception of <literal>text/plain</literal>. - Use the <link linkend="FORCE-TEXT-MODE">force-text-mode</link> action - to also filter other content. -</para> - -<para> - Substitutions are made at the source level, so if you want to <quote>roll - your own</quote> filters, you should first be familiar with HTML syntax, - and, of course, regular expressions. -</para> - -<para> - Just like the <link linkend="actions-file">actions files</link>, the - filter file is organized in sections, which are called <emphasis>filters</emphasis> - here. Each filter consists of a heading line, that starts with one of the - <emphasis>keywords</emphasis> <literal>FILTER:</literal>, - <literal>CLIENT-HEADER-FILTER:</literal> or <literal>SERVER-HEADER-FILTER:</literal> - followed by the filter's <emphasis>name</emphasis>, and a short (one line) - <emphasis>description</emphasis> of what it does. Below that line - come the <emphasis>jobs</emphasis>, i.e. lines that define the actual - text substitutions. By convention, the name of a filter - should describe what the filter <emphasis>eliminates</emphasis>. The - comment is used in the <ulink url="http://config.privoxy.org/">web-based - user interface</ulink>. -</para> - -<para> - Once a filter called <replaceable>name</replaceable> has been defined - in the filter file, it can be invoked by using an action of the form - +<literal><link linkend="filter">filter</link>{<replaceable>name</replaceable>}</literal> - in any <link linkend="actions-file">actions file</link>. -</para> - -<para> - Filter definitions start with a header line that contains the filter - type, the filter name and the filter description. - A content filter header line for a filter called <quote>foo</quote> could look - like this: -</para> - -<para> - <screen>FILTER: foo Replace all "foo" with "bar"</screen> -</para> - -<para> - Below that line, and up to the next header line, come the jobs that - define what text replacements the filter executes. They are specified - in a syntax that imitates <ulink url="http://www.perl.org/">Perl</ulink>'s - <literal>s///</literal> operator. If you are familiar with Perl, you - will find this to be quite intuitive, and may want to look at the - PCRS documentation for the subtle differences to Perl behaviour. Most - notably, the non-standard option letter <literal>U</literal> is supported, - which turns the default to ungreedy matching. -</para> - -<para> - If you are new to - <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular - Expressions</quote></ulink>, you might want to take a look at - the <link linkend="regex">Appendix on regular expressions</link>, and - see the <ulink url="http://perldoc.perl.org/perlre.html">Perl - manual</ulink> for - <ulink url="http://perldoc.perl.org/perlop.html">the - <literal>s///</literal> operator's syntax</ulink> and <ulink - url="http://perldoc.perl.org/perlre.html">Perl-style regular - expressions</ulink> in general. - The below examples might also help to get you started. -</para> - - - - -<sect2><title>Filter File Tutorial</title> -<para> - Now, let's complete our <quote>foo</quote> content filter. We have already defined - the heading, but the jobs are still missing. Since all it does is to replace - <quote>foo</quote> with <quote>bar</quote>, there is only one (trivial) job - needed: -</para> - -<para> - <screen>s/foo/bar/</screen> -</para> - -<para> - But wait! Didn't the comment say that <emphasis>all</emphasis> occurrences - of <quote>foo</quote> should be replaced? Our current job will only take - care of the first <quote>foo</quote> on each page. For global substitution, - we'll need to add the <literal>g</literal> option: -</para> - -<para> - <screen>s/foo/bar/g</screen> -</para> - -<para> - Our complete filter now looks like this: -</para> -<para> - <screen>FILTER: foo Replace all "foo" with "bar" -s/foo/bar/g</screen> -</para> - -<para> - Let's look at some real filters for more interesting examples. Here you see - a filter that protects against some common annoyances that arise from JavaScript - abuse. Let's look at its jobs one after the other: -</para> - - -<para> - <screen> -FILTER: js-annoyances Get rid of particularly annoying JavaScript abuse - -# Get rid of JavaScript referrer tracking. Test page: http://www.randomoddness.com/untitled.htm -# -s|(<script.*)document\.referrer(.*</script>)|$1"Not Your Business!"$2|Usg</screen> -</para> - -<para> - Following the header line and a comment, you see the job. Note that it uses - <literal>|</literal> as the delimiter instead of <literal>/</literal>, because - the pattern contains a forward slash, which would otherwise have to be escaped - by a backslash (<literal>\</literal>). -</para> - -<para> - Now, let's examine the pattern: it starts with the text <literal><script.*</literal> - enclosed in parentheses. Since the dot matches any character, and <literal>*</literal> - means: <quote>Match an arbitrary number of the element left of myself</quote>, this - matches <quote><script</quote>, followed by <emphasis>any</emphasis> text, i.e. - it matches the whole page, from the start of the first <script> tag. -</para> - -<para> - That's more than we want, but the pattern continues: <literal>document\.referrer</literal> - matches only the exact string <quote>document.referrer</quote>. The dot needed to - be <emphasis>escaped</emphasis>, i.e. preceded by a backslash, to take away its - special meaning as a joker, and make it just a regular dot. So far, the meaning is: - Match from the start of the first <script> tag in a the page, up to, and including, - the text <quote>document.referrer</quote>, if <emphasis>both</emphasis> are present - in the page (and appear in that order). -</para> - -<para> - But there's still more pattern to go. The next element, again enclosed in parentheses, - is <literal>.*</script></literal>. You already know what <literal>.*</literal> - means, so the whole pattern translates to: Match from the start of the first <script> - tag in a page to the end of the last <script> tag, provided that the text - <quote>document.referrer</quote> appears somewhere in between. -</para> - -<para> - This is still not the whole story, since we have ignored the options and the parentheses: - The portions of the page matched by sub-patterns that are enclosed in parentheses, will be - remembered and be available through the variables <literal>$1, $2, ...</literal> in - the substitute. The <literal>U</literal> option switches to ungreedy matching, which means - that the first <literal>.*</literal> in the pattern will only <quote>eat up</quote> all - text in between <quote><script</quote> and the <emphasis>first</emphasis> occurrence - of <quote>document.referrer</quote>, and that the second <literal>.*</literal> will - only span the text up to the <emphasis>first</emphasis> <quote></script></quote> - tag. Furthermore, the <literal>s</literal> option says that the match may span - multiple lines in the page, and the <literal>g</literal> option again means that the - substitution is global. -</para> - -<para> - So, to summarize, the pattern means: Match all scripts that contain the text - <quote>document.referrer</quote>. Remember the parts of the script from - (and including) the start tag up to (and excluding) the string - <quote>document.referrer</quote> as <literal>$1</literal>, and the part following - that string, up to and including the closing tag, as <literal>$2</literal>. -</para> - -<para> - Now the pattern is deciphered, but wasn't this about substituting things? So - lets look at the substitute: <literal>$1"Not Your Business!"$2</literal> is - easy to read: The text remembered as <literal>$1</literal>, followed by - <literal>"Not Your Business!"</literal> (<emphasis>including</emphasis> - the quotation marks!), followed by the text remembered as <literal>$2</literal>. - This produces an exact copy of the original string, with the middle part - (the <quote>document.referrer</quote>) replaced by <literal>"Not Your - Business!"</literal>. -</para> - -<para> - The whole job now reads: Replace <quote>document.referrer</quote> by - <literal>"Not Your Business!"</literal> wherever it appears inside a - <script&gt tag. Note that this job won't break JavaScript syntax, - since both the original and the replacement are syntactically valid - string objects. The script just won't have access to the referrer - information anymore. -</para> - -<para> - We'll show you two other jobs from the JavaScript taming department, but - this time only point out the constructs of special interest: -</para> - -<para> - <screen> -# The status bar is for displaying link targets, not pointless blahblah -# -s/window\.status\s*=\s*(['"]).*?\1/dUmMy=1/ig</screen> -</para> - -<para> - <literal>\s</literal> stands for whitespace characters (space, tab, newline, - carriage return, form feed), so that <literal>\s*</literal> means: <quote>zero - or more whitespace</quote>. The <literal>?</literal> in <literal>.*?</literal> - makes this matching of arbitrary text ungreedy. (Note that the <literal>U</literal> - option is not set). The <literal>['"]</literal> construct means: <quote>a single - <emphasis>or</emphasis> a double quote</quote>. Finally, <literal>\1</literal> is - a back-reference to the first parenthesis just like <literal>$1</literal> above, - with the difference that in the <emphasis>pattern</emphasis>, a backslash indicates - a back-reference, whereas in the <emphasis>substitute</emphasis>, it's the dollar. -</para> - -<para> - So what does this job do? It replaces assignments of single- or double-quoted - strings to the <quote>window.status</quote> object with a dummy assignment - (using a variable name that is hopefully odd enough not to conflict with - real variables in scripts). Thus, it catches many cases where e.g. pointless - descriptions are displayed in the status bar instead of the link target when - you move your mouse over links. -</para> - -<para> - <screen> -# Kill OnUnload popups. Yummy. Test: http://www.zdnet.com/zdsubs/yahoo/tree/yfs.html -# -s/(<body [^>]*)onunload(.*>)/$1never$2/iU</screen> -</para> - -<para> - Including the - <ulink url="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Event…">OnUnload - event binding</ulink> in the HTML DOM was a <emphasis>CRIME</emphasis>. - When I close a browser window, I want it to close and die. Basta. - This job replaces the <quote>onunload</quote> attribute in - <quote><body&gt</quote> tags with the dummy word <literal>never</literal>. - Note that the <literal>i</literal> option makes the pattern matching - case-insensitive. Also note that ungreedy matching alone doesn't always guarantee - a minimal match: In the first parenthesis, we had to use <literal>[^>]*</literal> - instead of <literal>.*</literal> to prevent the match from exceeding the - <body&gt tag if it doesn't contain <quote>OnUnload</quote>, but the page's - content does. -</para> - -<para> - The last example is from the fun department: -</para> - -<para> - <screen> -FILTER: fun Fun text replacements - -# Spice the daily news: -# -s/microsoft(?!\.com)/MicroSuck/ig</screen> -</para> - -<para> - Note the <literal>(?!\.com)</literal> part (a so-called negative lookahead) - in the job's pattern, which means: Don't match, if the string - <quote>.com</quote> appears directly following <quote>microsoft</quote> - in the page. This prevents links to microsoft.com from being trashed, while - still replacing the word everywhere else. -</para> - -<para> - <screen> -# Buzzword Bingo (example for extended regex syntax) -# -s* industry[ -]leading \ -| cutting[ -]edge \ -| customer[ -]focused \ -| market[ -]driven \ -| award[ -]winning # Comments are OK, too! \ -| high[ -]performance \ -| solutions[ -]based \ -| unmatched \ -| unparalleled \ -| unrivalled \ -*<font color="red"><b>BINGO!</b></font> \ -*igx</screen> -</para> - -<para> - The <literal>x</literal> option in this job turns on extended syntax, and allows for - e.g. the liberal use of (non-interpreted!) whitespace for nicer formatting. -</para> - -<para> - You get the idea? -</para> -</sect2> - - - -<sect2 id="predefined-filters"><title>The Pre-defined Filters</title> - - - -<para> -The distribution <filename>default.filter</filename> file contains a selection of -pre-defined filters for your convenience: -</para> - -<variablelist> - <varlistentry> - <term><emphasis>js-annoyances</emphasis></term> - <listitem> - <para> - The purpose of this filter is to get rid of particularly annoying JavaScript abuse. - To that end, it - <itemizedlist> - <listitem> - <para> - replaces JavaScript references to the browser's referrer information - with the string "Not Your Business!". This compliments the <literal><link - linkend="hide-referrer">hide-referrer</link></literal> action on the content level. - </para> - </listitem> - <listitem> - <para> - removes the bindings to the DOM's - <ulink url="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Event…">unload - event</ulink> which we feel has no right to exist and is responsible for most <quote>exit consoles</quote>, i.e. - nasty windows that pop up when you close another one. - </para> - </listitem> - <listitem> - <para> - removes code that causes new windows to be opened with undesired properties, such as being - full-screen, non-resizeable, without location, status or menu bar etc. - </para> - </listitem> - </itemizedlist> - </para> - <para> - Use with caution. This is an aggressive filter, and can break sites that - rely heavily on JavaScript. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>js-events</emphasis></term> - <listitem> - <para> - This is a very radical measure. It removes virtually all JavaScript event bindings, which - means that scripts can not react to user actions such as mouse movements or clicks, window - resizing etc, anymore. Use with caution! - </para> - <para> - We <emphasis>strongly discourage</emphasis> using this filter as a default since it breaks - many legitimate scripts. It is meant for use only on extra-nasty sites (should you really - need to go there). - </para> - </listitem> - </varlistentry> - -<varlistentry> - <term><emphasis>html-annoyances</emphasis></term> - <listitem> - <para> - This filter will undo many common instances of HTML based abuse. - </para> - <para> - The <literal>BLINK</literal> and <literal>MARQUEE</literal> tags - are neutralized (yeah baby!), and browser windows will be created as - resizeable (as of course they should be!), and will have location, - scroll and menu bars -- even if specified otherwise. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>content-cookies</emphasis></term> - <listitem> - <para> - Most cookies are set in the HTTP dialog, where they can be intercepted - by the - <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal> - and <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal> - actions. But web sites increasingly make use of HTML meta tags and JavaScript - to sneak cookies to the browser on the content level. - </para> - <para> - This filter disables most HTML and JavaScript code that reads or sets - cookies. It cannot detect all clever uses of these types of code, so it - should not be relied on as an absolute fix. Use it wherever you would also - use the cookie crunch actions. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>refresh tags</emphasis></term> - <listitem> - <para> - Disable any refresh tags if the interval is greater than nine seconds (so - that redirections done via refresh tags are not destroyed). This is useful - for dial-on-demand setups, or for those who find this HTML feature - annoying. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>unsolicited-popups</emphasis></term> - <listitem> - <para> - This filter attempts to prevent only <quote>unsolicited</quote> pop-up - windows from opening, yet still allow pop-up windows that the user - has explicitly chosen to open. It was added in version 3.0.1, - as an improvement over earlier such filters. - </para> - <para> - Technical note: The filter works by redefining the window.open JavaScript - function to a dummy function, <literal>PrivoxyWindowOpen()</literal>, - during the loading and rendering phase of each HTML page access, and - restoring the function afterward. - </para> - <para> - This is recommended only for browsers that cannot perform this function - reliably themselves. And be aware that some sites require such windows - in order to function normally. Use with caution. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>all-popups</emphasis></term> - <listitem> - <para> - Attempt to prevent <emphasis>all</emphasis> pop-up windows from opening. - Note this should be used with even more discretion than the above, since - it is more likely to break some sites that require pop-ups for normal - usage. Use with caution. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>img-reorder</emphasis></term> - <listitem> - <para> - This is a helper filter that has no value if used alone. It makes the - <literal>banners-by-size</literal> and <literal>banners-by-link</literal> - (see below) filters more effective and should be enabled together with them. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>banners-by-size</emphasis></term> - <listitem> - <para> - This filter removes image tags purely based on what size they are. Fortunately - for us, many ads and banner images tend to conform to certain standardized - sizes, which makes this filter quite effective for ad stripping purposes. - </para> - <para> - Occasionally this filter will cause false positives on images that are not ads, - but just happen to be of one of the standard banner sizes. - </para> - <para> - Recommended only for those who require extreme ad blocking. The default - block rules should catch 95+% of all ads <emphasis>without</emphasis> this filter enabled. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>banners-by-link</emphasis></term> - <listitem> - <para> - This is an experimental filter that attempts to kill any banners if - their URLs seem to point to known or suspected click trackers. It is currently - not of much value and is not recommended for use by default. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>webbugs</emphasis></term> - <listitem> - <para> - Webbugs are small, invisible images (technically 1X1 GIF images), that - are used to track users across websites, and collect information on them. - As an HTML page is loaded by the browser, an embedded image tag causes the - browser to contact a third-party site, disclosing the tracking information - through the requested URL and/or cookies for that third-party domain, without - the user ever becoming aware of the interaction with the third-party site. - HTML-ized spam also uses a similar technique to verify email addresses. - </para> - <para> - This filter removes the HTML code that loads such <quote>webbugs</quote>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>tiny-textforms</emphasis></term> - <listitem> - <para> - A rather special-purpose filter that can be used to enlarge textareas (those - multi-line text boxes in web forms) and turn off hard word wrap in them. - It was written for the sourceforge.net tracker system where such boxes are - a nuisance, but it can be handy on other sites, too. - </para> - <para> - It is not recommended to use this filter as a default. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>jumping-windows</emphasis></term> - <listitem> - <para> - Many consider windows that move, or resize themselves to be abusive. This filter - neutralizes the related JavaScript code. Note that some sites might not display - or behave as intended when using this filter. Use with caution. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>frameset-borders</emphasis></term> - <listitem> - <para> - Some web designers seem to assume that everyone in the world will view their - web sites using the same browser brand and version, screen resolution etc, - because only that assumption could explain why they'd use static frame sizes, - yet prevent their frames from being resized by the user, should they be too - small to show their whole content. - </para> - <para> - This filter removes the related HTML code. It should only be applied to sites - which need it. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>demoronizer</emphasis></term> - <listitem> - <para> - Many Microsoft products that generate HTML use non-standard extensions (read: - violations) of the ISO 8859-1 aka Latin-1 character set. This can cause those - HTML documents to display with errors on standard-compliant platforms. - </para> - <para> - This filter translates the MS-only characters into Latin-1 equivalents. - It is not necessary when using MS products, and will cause corruption of - all documents that use 8-bit character sets other than Latin-1. It's mostly - worthwhile for Europeans on non-MS platforms, if weird garbage characters - sometimes appear on some pages, or user agents that don't correct for this on - the fly. - - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>shockwave-flash</emphasis></term> - <listitem> - <para> - A filter for shockwave haters. As the name suggests, this filter strips code - out of web pages that is used to embed shockwave flash objects. - </para> - <para> - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>quicktime-kioskmode</emphasis></term> - <listitem> - <para> - Change HTML code that embeds Quicktime objects so that kioskmode, which - prevents saving, is disabled. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>fun</emphasis></term> - <listitem> - <para> - Text replacements for subversive browsing fun. Make fun of your favorite - Monopolist or play buzzword bingo. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>crude-parental</emphasis></term> - <listitem> - <para> - A demonstration-only filter that shows how <application>Privoxy</application> - can be used to delete web content on a keyword basis. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>ie-exploits</emphasis></term> - <listitem> - <para> - An experimental collection of text replacements to disable malicious HTML and JavaScript - code that exploits known security holes in Internet Explorer. - </para> - <para> - Presently, it only protects against Nimda and a cross-site scripting bug, and - would need active maintenance to provide more substantial protection. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>site-specifics</emphasis></term> - <listitem> - <para> - Some web sites have very specific problems, the cure for which doesn't apply - anywhere else, or could even cause damage on other sites. - </para> - <para> - This is a collection of such site-specific cures which should only be applied - to the sites they were intended for, which is what the supplied - <filename>default.action</filename> file does. Users shouldn't need to change - anything regarding this filter. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>google</emphasis></term> - <listitem> - <para> - A CSS based block for Google text ads. Also removes a width limitation - and the toolbar advertisement. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>yahoo</emphasis></term> - <listitem> - <para> - Another CSS based block, this time for Yahoo text ads. And removes - a width limitation as well. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>msn</emphasis></term> - <listitem> - <para> - Another CSS based block, this time for MSN text ads. And removes - tracking URLs, as well as a width limitation. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>blogspot</emphasis></term> - <listitem> - <para> - Cleans up some Blogspot blogs. Read the fine print before using this one! - </para> - <para> - This filter also intentionally removes some navigation stuff and sets the - page width to 100%. As a result, some rounded <quote>corners</quote> would - appear to early or not at all and as fixing this would require a browser - that understands background-size (CSS3), they are removed instead. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>xml-to-html</emphasis></term> - <listitem> - <para> - Server-header filter to change the Content-Type from xml to html. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>html-to-xml</emphasis></term> - <listitem> - <para> - Server-header filter to change the Content-Type from html to xml. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>no-ping</emphasis></term> - <listitem> - <para> - Removes the non-standard <literal>ping</literal> attribute from - anchor and area HTML tags. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>hide-tor-exit-notation</emphasis></term> - <listitem> - <para> - Client-header filter to remove the <command>Tor</command> exit node notation - found in Host and Referer headers. - </para> - <para> - If &my-app; and <command>Tor</command> are chained and &my-app; - is configured to use socks4a, one can use <quote>http://www.example.org.foobar.exit/</quote> - to access the host <quote>www.example.org</quote> through the - <command>Tor</command> exit node <quote>foobar</quote>. - </para> - <para> - As the HTTP client isn't aware of this notation, it treats the - whole string <quote>www.example.org.foobar.exit</quote> as host and uses it - for the <quote>Host</quote> and <quote>Referer</quote> headers. From the - server's point of view the resulting headers are invalid and can cause problems. - </para> - <para> - An invalid <quote>Referer</quote> header can trigger <quote>hot-linking</quote> - protections, an invalid <quote>Host</quote> header will make it impossible for - the server to find the right vhost (several domains hosted on the same IP address). - </para> - <para> - This client-header filter removes the <quote>foo.exit</quote> part in those headers - to prevent the mentioned problems. Note that it only modifies - the HTTP headers, it doesn't make it impossible for the server - to detect your <command>Tor</command> exit node based on the IP address - the request is coming from. - </para> - </listitem> - </varlistentry> - - -</variablelist> - -</sect2> -</sect1> - - - - - - - -<sect1 id="templates"> -<title>Privoxy's Template Files</title> -<para> - All <application>Privoxy</application> built-in pages, i.e. error pages such as the - <ulink url="http://show-the-404-error.page"><quote>404 - No Such Domain</quote> - error page</ulink>, the <ulink - url="http://ads.bannerserver.example.com/nasty-ads/sponsor.html"><quote>BLOCKED</quote> - page</ulink> - and all pages of its <ulink url="http://config.privoxy.org/">web-based - user interface</ulink>, are generated from <emphasis>templates</emphasis>. - (<application>Privoxy</application> must be running for the above links to work as - intended.) -</para> - -<para> - These templates are stored in a subdirectory of the <link linkend="confdir">configuration - directory</link> called <filename>templates</filename>. On Unixish platforms, - this is typically - <ulink url="file:///etc/privoxy/templates/"><filename>/etc/privoxy/templates/</filename></ulink>. -</para> - -<para> - The templates are basically normal HTML files, but with place-holders (called symbols - or exports), which <application>Privoxy</application> fills at run time. It - is possible to edit the templates with a normal text editor, should you want - to customize them. (<emphasis>Not recommended for the casual - user</emphasis>). Should you create your own custom templates, you should use - the <filename>config</filename> setting <link linkend="templdir">templdir</link> - to specify an alternate location, so your templates do not get overwritten - during upgrades. - </para> - <para> - Note that just like in configuration files, lines starting - with <literal>#</literal> are ignored when the templates are filled in. -</para> - -<para> - The place-holders are of the form <literal>@name@</literal>, and you will - find a list of available symbols, which vary from template to template, - in the comments at the start of each file. Note that these comments are not - always accurate, and that it's probably best to look at the existing HTML - code to find out which symbols are supported and what they are filled in with. -</para> - -<para> - A special application of this substitution mechanism is to make whole - blocks of HTML code disappear when a specific symbol is set. We use this - for many purposes, one of them being to include the beta warning in all - our user interface (CGI) pages when <application>Privoxy</application> - is in an alpha or beta development stage: -</para> - -<para> - <screen> - - - ... beta warning HTML code goes here ... - -</screen> -</para> - -<para> - If the "unstable" symbol is set, everything in between and including - <literal>@if-unstable-start</literal> and <literal>if-unstable-end@</literal> - will disappear, leaving nothing but an empty comment: -</para> - -<para> - <screen></screen> -</para> - -<para> - There's also an if-then-else construct and an <literal>#include</literal> - mechanism, but you'll sure find out if you are inclined to edit the - templates ;-) -</para> - -<para> - All templates refer to a style located at - <ulink url="http://config.privoxy.org/send-stylesheet"><literal>http://config.privoxy.org/send-stylesheet</literal></ulink>. - This is, of course, locally served by <application>Privoxy</application> - and the source for it can be found and edited in the - <filename>cgi-style.css</filename> template. -</para> - -</sect1> - - - - - - - -<sect1 id="contact"><title>Contacting the Developers, Bug Reporting and Feature -Requests</title> - - - &contacting; - - -</sect1> - - - - - -<sect1 id="copyright"><title>Privoxy Copyright, License and History</title> - - - &copyright; - - - -<sect2><title>License</title> - - &license; - -</sect2> - - - - - -<sect2 id="history"><title>History</title> - - &history; - -</sect2> - -<sect2 id="authors"><title>Authors</title> - - &p-authors; - -</sect2> - -</sect1> - - - - - -<sect1 id="seealso"><title>See Also</title> - - &seealso; - -</sect1> - - - - -<sect1 id="appendix"><title>Appendix</title> - - - -<sect2 id="regex"> -<title>Regular Expressions</title> -<para> - <application>Privoxy</application> uses Perl-style <quote>regular - expressions</quote> in its <link linkend="actions-file">actions - files</link> and <link linkend="filter-file">filter file</link>, - through the <ulink url="http://www.pcre.org/">PCRE</ulink> and - - <application>PCRS</application> libraries. -</para> - -<para> - If you are reading this, you probably don't understand what <quote>regular - expressions</quote> are, or what they can do. So this will be a very brief - introduction only. A full explanation would require a <ulink - url="http://www.oreilly.com/catalog/regex/">book</ulink> ;-) -</para> - -<para> - Regular expressions provide a language to describe patterns that can be - run against strings of characters (letter, numbers, etc), to see if they - match the string or not. The patterns are themselves (sometimes complex) - strings of literal characters, combined with wild-cards, and other special - characters, called meta-characters. The <quote>meta-characters</quote> have - special meanings and are used to build complex patterns to be matched against. - Perl Compatible Regular Expressions are an especially convenient - <quote>dialect</quote> of the regular expression language. -</para> - -<para> - To make a simple analogy, we do something similar when we use wild-card - characters when listing files with the <command>dir</command> command in DOS. - <literal>*.*</literal> matches all filenames. The <quote>special</quote> - character here is the asterisk which matches any and all characters. We can be - more specific and use <literal>?</literal> to match just individual - characters. So <quote>dir file?.text</quote> would match - <quote>file1.txt</quote>, <quote>file2.txt</quote>, etc. We are pattern - matching, using a similar technique to <quote>regular expressions</quote>! -</para> - -<para> - Regular expressions do essentially the same thing, but are much, much more - powerful. There are many more <quote>special characters</quote> and ways of - building complex patterns however. Let's look at a few of the common ones, - and then some examples: -</para> - -<para><simplelist> - <member> - <emphasis>.</emphasis> - Matches any single character, e.g. <quote>a</quote>, - <quote>A</quote>, <quote>4</quote>, <quote>:</quote>, or <quote>@</quote>. - </member> -</simplelist></para> - -<para><simplelist> - <member> - <emphasis>?</emphasis> - The preceding character or expression is matched ZERO or ONE - times. Either/or. - </member> -</simplelist></para> - -<para><simplelist> - <member> - <emphasis>+</emphasis> - The preceding character or expression is matched ONE or MORE - times. - </member> -</simplelist></para> - -<para><simplelist> - <member> - <emphasis>*</emphasis> - The preceding character or expression is matched ZERO or MORE - times. - </member> -</simplelist></para> - -<para><simplelist> - <member> - <emphasis>\</emphasis> - The <quote>escape</quote> character denotes that - the following character should be taken literally. This is used where one of the - special characters (e.g. <quote>.</quote>) needs to be taken literally and - not as a special meta-character. Example: <quote>example\.com</quote>, makes - sure the period is recognized only as a period (and not expanded to its - meta-character meaning of any single character). - </member> -</simplelist></para> - -<para><simplelist> - <member> - <emphasis>[ ]</emphasis> - Characters enclosed in brackets will be matched if - any of the enclosed characters are encountered. For instance, <quote>[0-9]</quote> - matches any numeric digit (zero through nine). As an example, we can combine - this with <quote>+</quote> to match any digit one of more times: <quote>[0-9]+</quote>. - </member> -</simplelist></para> - -<para><simplelist> - <member> - <emphasis>( )</emphasis> - parentheses are used to group a sub-expression, - or multiple sub-expressions. - </member> -</simplelist></para> - -<para><simplelist> - <member> - <emphasis>|</emphasis> - The <quote>bar</quote> character works like an - <quote>or</quote> conditional statement. A match is successful if the - sub-expression on either side of <quote>|</quote> matches. As an example: - <quote>/(this|that) example/</quote> uses grouping and the bar character - and would match either <quote>this example</quote> or <quote>that - example</quote>, and nothing else. - </member> -</simplelist></para> - -<para> - These are just some of the ones you are likely to use when matching URLs with - <application>Privoxy</application>, and is a long way from a definitive - list. This is enough to get us started with a few simple examples which may - be more illuminating: -</para> - -<para> - <emphasis><literal>/.*/banners/.*</literal></emphasis> - A simple example - that uses the common combination of <quote>.</quote> and <quote>*</quote> to - denote any character, zero or more times. In other words, any string at all. - So we start with a literal forward slash, then our regular expression pattern - (<quote>.*</quote>) another literal forward slash, the string - <quote>banners</quote>, another forward slash, and lastly another - <quote>.*</quote>. We are building - a directory path here. This will match any file with the path that has a - directory named <quote>banners</quote> in it. The <quote>.*</quote> matches - any characters, and this could conceivably be more forward slashes, so it - might expand into a much longer looking path. For example, this could match: - <quote>/eye/hate/spammers/banners/annoy_me_please.gif</quote>, or just - <quote>/banners/annoying.html</quote>, or almost an infinite number of other - possible combinations, just so it has <quote>banners</quote> in the path - somewhere. -</para> - -<para> - And now something a little more complex: -</para> - -<para> - <emphasis><literal>/.*/adv((er)?ts?|ertis(ing|ements?))?/</literal></emphasis> - - We have several literal forward slashes again (<quote>/</quote>), so we are - building another expression that is a file path statement. We have another - <quote>.*</quote>, so we are matching against any conceivable sub-path, just so - it matches our expression. The only true literal that <emphasis>must - match</emphasis> our pattern is <application>adv</application>, together with - the forward slashes. What comes after the <quote>adv</quote> string is the - interesting part. -</para> - -<para> - Remember the <quote>?</quote> means the preceding expression (either a - literal character or anything grouped with <quote>(...)</quote> in this case) - can exist or not, since this means either zero or one match. So - <quote>((er)?ts?|ertis(ing|ements?))</quote> is optional, as are the - individual sub-expressions: <quote>(er)</quote>, - <quote>(ing|ements?)</quote>, and the <quote>s</quote>. The <quote>|</quote> - means <quote>or</quote>. We have two of those. For instance, - <quote>(ing|ements?)</quote>, can expand to match either <quote>ing</quote> - <emphasis>OR</emphasis> <quote>ements?</quote>. What is being done here, is an - attempt at matching as many variations of <quote>advertisement</quote>, and - similar, as possible. So this would expand to match just <quote>adv</quote>, - or <quote>advert</quote>, or <quote>adverts</quote>, or - <quote>advertising</quote>, or <quote>advertisement</quote>, or - <quote>advertisements</quote>. You get the idea. But it would not match - <quote>advertizements</quote> (with a <quote>z</quote>). We could fix that by - changing our regular expression to: - <quote>/.*/adv((er)?ts?|erti(s|z)(ing|ements?))?/</quote>, which would then match - either spelling. -</para> - -<para> - <emphasis><literal>/.*/advert[0-9]+\.(gif|jpe?g)</literal></emphasis> - Again - another path statement with forward slashes. Anything in the square brackets - <quote>[ ]</quote> can be matched. This is using <quote>0-9</quote> as a - shorthand expression to mean any digit one through nine. It is the same as - saying <quote>0123456789</quote>. So any digit matches. The <quote>+</quote> - means one or more of the preceding expression must be included. The preceding - expression here is what is in the square brackets -- in this case, any digit - one through nine. Then, at the end, we have a grouping: <quote>(gif|jpe?g)</quote>. - This includes a <quote>|</quote>, so this needs to match the expression on - either side of that bar character also. A simple <quote>gif</quote> on one side, and the other - side will in turn match either <quote>jpeg</quote> or <quote>jpg</quote>, - since the <quote>?</quote> means the letter <quote>e</quote> is optional and - can be matched once or not at all. So we are building an expression here to - match image GIF or JPEG type image file. It must include the literal - string <quote>advert</quote>, then one or more digits, and a <quote>.</quote> - (which is now a literal, and not a special character, since it is escaped - with <quote>\</quote>), and lastly either <quote>gif</quote>, or - <quote>jpeg</quote>, or <quote>jpg</quote>. Some possible matches would - include: <quote>//advert1.jpg</quote>, - <quote>/nasty/ads/advert1234.gif</quote>, - <quote>/banners/from/hell/advert99.jpg</quote>. It would not match - <quote>advert1.gif</quote> (no leading slash), or - <quote>/adverts232.jpg</quote> (the expression does not include an - <quote>s</quote>), or <quote>/advert1.jsp</quote> (<quote>jsp</quote> is not - in the expression anywhere). -</para> - -<para> - We are barely scratching the surface of regular expressions here so that you - can understand the default <application>Privoxy</application> - configuration files, and maybe use this knowledge to customize your own - installation. There is much, much more that can be done with regular - expressions. Now that you know enough to get started, you can learn more on - your own :/ -</para> - -<para> - More reading on Perl Compatible Regular expressions: - <ulink url="http://perldoc.perl.org/perlre.html">http://perldoc.perl.org/perlre.html</ulink> -</para> - -<para> - For information on regular expression based substitutions and their applications - in filters, please see the <link linkend="filter-file">filter file tutorial</link> - in this manual. -</para> -</sect2> - - - - - -<sect2> -<title>Privoxy's Internal Pages</title> - -<para> - Since <application>Privoxy</application> proxies each requested - web page, it is easy for <application>Privoxy</application> to - trap certain special URLs. In this way, we can talk directly to - <application>Privoxy</application>, and see how it is - configured, see how our rules are being applied, change these - rules and other configuration options, and even turn - <application>Privoxy's</application> filtering off, all with - a web browser. - -</para> - -<para> - The URLs listed below are the special ones that allow direct access - to <application>Privoxy</application>. Of course, - <application>Privoxy</application> must be running to access these. If - not, you will get a friendly error message. Internet access is not - necessary either. -</para> - -<para> - <itemizedlist> - - <listitem> - <para> - Privoxy main page: - </para> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink> - </para> - </blockquote> - <para> - There is a shortcut: <ulink url="http://p.p/">http://p.p/</ulink> (But it - doesn't provide a fall-back to a real page, in case the request is not - sent through <application>Privoxy</application>) - </para> - </listitem> - - <listitem> - <para> - Show information about the current configuration, including viewing and - editing of actions files: - </para> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink> - </para> - </blockquote> - </listitem> - - <listitem> - <para> - Show the source code version numbers: - </para> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/show-version">http://config.privoxy.org/show-version</ulink> - </para> - </blockquote> - </listitem> - - <listitem> - <para> - Show the browser's request headers: - </para> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/show-request">http://config.privoxy.org/show-request</ulink> - </para> - </blockquote> - </listitem> - - <listitem> - <para> - Show which actions apply to a URL and why: - </para> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink> - </para> - </blockquote> - </listitem> - - <listitem> - <para> - Toggle Privoxy on or off. This feature can be turned off/on in the main - <filename>config</filename> file. When toggled <quote>off</quote>, <quote>Privoxy</quote> - continues to run, but only as a pass-through proxy, with no actions taking - place: - </para> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/toggle">http://config.privoxy.org/toggle</ulink> - </para> - </blockquote> - <para> - Short cuts. Turn off, then on: - </para> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/toggle?set=disable">http://config.privoxy.org/toggle?set=disable</ulink> - </para> - </blockquote> - <blockquote> - <para> - <ulink url="http://config.privoxy.org/toggle?set=enable">http://config.privoxy.org/toggle?set=enable</ulink> - </para> - </blockquote> - </listitem> - - </itemizedlist> -</para> - -<para> - These may be bookmarked for quick reference. See next. - -</para> - -<sect3 id="bookmarklets"> -<title>Bookmarklets</title> -<para> - Below are some <quote>bookmarklets</quote> to allow you to easily access a - <quote>mini</quote> version of some of <application>Privoxy's</application> - special pages. They are designed for MS Internet Explorer, but should work - equally well in Netscape, Mozilla, and other browsers which support - JavaScript. They are designed to run directly from your bookmarks - not by - clicking the links below (although that should work for testing). -</para> -<para> - To save them, right-click the link and choose <quote>Add to Favorites</quote> - (IE) or <quote>Add Bookmark</quote> (Netscape). You will get a warning that - the bookmark <quote>may not be safe</quote> - just click OK. Then you can run the - Bookmarklet directly from your favorites/bookmarks. For even faster access, - you can put them on the <quote>Links</quote> bar (IE) or the <quote>Personal - Toolbar</quote> (Netscape), and run them with a single click. -</para> - -<para> - <itemizedlist> - - <listitem> - <para> - <ulink - url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=enabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Enable</ulink> - </para> - </listitem> - - <listitem> - <para> - <ulink - url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=disabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Disable</ulink> - </para> - </listitem> - - <listitem> - <para> - <ulink - url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=toggle','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Toggle Privoxy</ulink> (Toggles between enabled and disabled) - </para> - </listitem> - - <listitem> - <para> - <ulink - url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y','ijbstatus','width=250,height=2,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy- View Status</ulink> - </para> - </listitem> - - <listitem> - <para> - <ulink url="javascript:void(window.open('http://config.privoxy.org/show-url-info?url='+escape(location.href),'Why').focus());">Privoxy - Why?</ulink> - </para> - </listitem> - </itemizedlist> -</para> - -<para> - Credit: The site which gave us the general idea for these bookmarklets is - <ulink url="http://www.bookmarklets.com/">www.bookmarklets.com</ulink>. They - have more information about bookmarklets. -</para> - - -</sect3> - -</sect2> - - - -<sect2 id="chain"> -<title>Chain of Events</title> -<para> - Let's take a quick look at how some of <application>Privoxy's</application> - core features are triggered, and the ensuing sequence of events when a web - page is requested by your browser: -</para> - -<para> - <itemizedlist> - <listitem> - <para> - First, your web browser requests a web page. The browser knows to send - the request to <application>Privoxy</application>, which will in turn, - relay the request to the remote web server after passing the following - tests: - </para> - </listitem> - <listitem> - <para> - <application>Privoxy</application> traps any request for its own internal CGI - pages (e.g <ulink url="http://p.p/">http://p.p/</ulink>) and sends the CGI page back to the browser. - </para> - </listitem> - <listitem> - <para> - Next, <application>Privoxy</application> checks to see if the URL - matches any <link - linkend="BLOCK"><quote>+block</quote></link> patterns. If - so, the URL is then blocked, and the remote web server will not be contacted. - <link linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link> - and - <link linkend="HANDLE-AS-EMPTY-DOCUMENT"><quote>+handle-as-empty-document</quote></link> - are then checked, and if there is no match, an - HTML <quote>BLOCKED</quote> page is sent back to the browser. Otherwise, if - it does match, an image is returned for the former, and an empty text - document for the latter. The type of image would depend on the setting of - <link linkend="SET-IMAGE-BLOCKER"><quote>+set-image-blocker</quote></link> - (blank, checkerboard pattern, or an HTTP redirect to an image elsewhere). - </para> - </listitem> - <listitem> - <para> - Untrusted URLs are blocked. If URLs are being added to the - <filename>trust</filename> file, then that is done. - </para> - </listitem> - <listitem> - <para> - If the URL pattern matches the <link - linkend="FAST-REDIRECTS"><quote>+fast-redirects</quote></link> action, - it is then processed. Unwanted parts of the requested URL are stripped. - </para> - </listitem> - <listitem> - <para> - Now the rest of the client browser's request headers are processed. If any - of these match any of the relevant actions (e.g. <link - linkend="HIDE-USER-AGENT"><quote>+hide-user-agent</quote></link>, - etc.), headers are suppressed or forged as determined by these actions and - their parameters. - </para> - </listitem> - <listitem> - <para> - Now the web server starts sending its response back (i.e. typically a web - page). - </para> - </listitem> - <listitem> - <para> - First, the server headers are read and processed to determine, among other - things, the MIME type (document type) and encoding. The headers are then - filtered as determined by the - <link linkend="CRUNCH-INCOMING-COOKIES"><quote>+crunch-incoming-cookies</quote></link>, - <link linkend="SESSION-COOKIES-ONLY"><quote>+session-cookies-only</quote></link>, - and <link linkend="DOWNGRADE-HTTP-VERSION"><quote>+downgrade-http-version</quote></link> - actions. - </para> - </listitem> - <listitem> - <para> - If any <link linkend="FILTER"><quote>+filter</quote></link> action - or <link - linkend="DEANIMATE-GIFS"><quote>+deanimate-gifs</quote></link> - action applies (and the document type fits the action), the rest of the page is - read into memory (up to a configurable limit). Then the filter rules (from - <filename>default.filter</filename> and any other filter files) are - processed against the buffered content. Filters are applied in the order - they are specified in one of the filter files. Animated GIFs, if present, - are reduced to either the first or last frame, depending on the action - setting.The entire page, which is now filtered, is then sent by - <application>Privoxy</application> back to your browser. - </para> - <para> - If neither a <link linkend="FILTER"><quote>+filter</quote></link> action - or <link - linkend="DEANIMATE-GIFS"><quote>+deanimate-gifs</quote></link> - matches, then <application>Privoxy</application> passes the raw data through - to the client browser as it becomes available. - </para> - </listitem> - <listitem> - <para> - As the browser receives the now (possibly filtered) page content, it - reads and then requests any URLs that may be embedded within the page - source, e.g. ad images, stylesheets, JavaScript, other HTML documents (e.g. - frames), sounds, etc. For each of these objects, the browser issues a - separate request (this is easily viewable in <application>Privoxy's</application> - logs). And each such request is in turn processed just as above. Note that a - complex web page will have many, many such embedded URLs. If these - secondary requests are to a different server, then quite possibly a very - differing set of actions is triggered. - </para> - </listitem> - - </itemizedlist> -</para> -<para> - NOTE: This is somewhat of a simplistic overview of what happens with each URL - request. For the sake of brevity and simplicity, we have focused on - <application>Privoxy's</application> core features only. -</para> - -</sect2> - - - -<sect2 id="actionsanat"> -<title>Troubleshooting: Anatomy of an Action</title> - -<para> - The way <application>Privoxy</application> applies - <link linkend="ACTIONS">actions</link> and <link linkend="FILTER">filters</link> - to any given URL can be complex, and not always so - easy to understand what is happening. And sometimes we need to be able to - <emphasis>see</emphasis> just what <application>Privoxy</application> is - doing. Especially, if something <application>Privoxy</application> is doing - is causing us a problem inadvertently. It can be a little daunting to look at - the actions and filters files themselves, since they tend to be filled with - <link linkend="regex">regular expressions</link> whose consequences are not - always so obvious. -</para> - -<para> - One quick test to see if <application>Privoxy</application> is causing a problem - or not, is to disable it temporarily. This should be the first troubleshooting - step. See <link linkend="bookmarklets">the Bookmarklets</link> section on a quick - and easy way to do this (be sure to flush caches afterward!). Looking at the - logs is a good idea too. (Note that both the toggle feature and logging are - enabled via <filename>config</filename> file settings, and may need to be - turned <quote>on</quote>.) -</para> -<para> - Another easy troubleshooting step to try is if you have done any - customization of your installation, revert back to the installed - defaults and see if that helps. There are times the developers get complaints - about one thing or another, and the problem is more related to a customized - configuration issue. -</para> - -<para> - <application>Privoxy</application> also provides the - <ulink url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink> - page that can show us very specifically how <application>actions</application> - are being applied to any given URL. This is a big help for troubleshooting. -</para> - -<para> - First, enter one URL (or partial URL) at the prompt, and then - <application>Privoxy</application> will tell us - how the current configuration will handle it. This will not - help with filtering effects (i.e. the <link - linkend="FILTER"><quote>+filter</quote></link> action) from - one of the filter files since this is handled very - differently and not so easy to trap! It also will not tell you about any other - URLs that may be embedded within the URL you are testing. For instance, images - such as ads are expressed as URLs within the raw page source of HTML pages. So - you will only get info for the actual URL that is pasted into the prompt area - -- not any sub-URLs. If you want to know about embedded URLs like ads, you - will have to dig those out of the HTML source. Use your browser's <quote>View - Page Source</quote> option for this. Or right click on the ad, and grab the - URL. -</para> - -<para> - Let's try an example, <ulink url="http://google.com">google.com</ulink>, - and look at it one section at a time in a sample configuration (your real - configuration may vary): -</para> - -<para> - <screen> - Matches for http://www.google.com: - - In file: default.action <guibutton>[ View ]</guibutton> <guibutton>[ Edit ]</guibutton> - - {+change-x-forwarded-for{block} - +deanimate-gifs {last} - +fast-redirects {check-decoded-url} - +filter {refresh-tags} - +filter {img-reorder} - +filter {banners-by-size} - +filter {webbugs} - +filter {jumping-windows} - +filter {ie-exploits} - +hide-from-header {block} - +hide-referrer {forge} - +session-cookies-only - +set-image-blocker {pattern} -/ - - { -session-cookies-only } - .google.com - - { -fast-redirects } - .google.com - -In file: user.action <guibutton>[ View ]</guibutton> <guibutton>[ Edit ]</guibutton> -(no matches in this file) -</screen> -</para> - -<para> - This is telling us how we have defined our - <link linkend="ACTIONS"><quote>actions</quote></link>, and - which ones match for our test case, <quote>google.com</quote>. - Displayed is all the actions that are available to us. Remember, - the <literal>+</literal> sign denotes <quote>on</quote>. <literal>-</literal> - denotes <quote>off</quote>. So some are <quote>on</quote> here, but many - are <quote>off</quote>. Each example we try may provide a slightly different - end result, depending on our configuration directives. -</para> -<para> - The first listing - is for our <filename>default.action</filename> file. The large, multi-line - listing, is how the actions are set to match for all URLs, i.e. our default - settings. If you look at your <quote>actions</quote> file, this would be the - section just below the <quote>aliases</quote> section near the top. This - will apply to all URLs as signified by the single forward slash at the end - of the listing -- <quote> / </quote>. -</para> - -<para> - But we have defined additional actions that would be exceptions to these general - rules, and then we list specific URLs (or patterns) that these exceptions - would apply to. Last match wins. Just below this then are two explicit - matches for <quote>.google.com</quote>. The first is negating our previous - cookie setting, which was for <link - linkend="SESSION-COOKIES-ONLY"><quote>+session-cookies-only</quote></link> - (i.e. not persistent). So we will allow persistent cookies for google, at - least that is how it is in this example. The second turns - <emphasis>off</emphasis> any <link - linkend="FAST-REDIRECTS"><quote>+fast-redirects</quote></link> - action, allowing this to take place unmolested. Note that there is a leading - dot here -- <quote>.google.com</quote>. This will match any hosts and - sub-domains, in the google.com domain also, such as - <quote>www.google.com</quote> or <quote>mail.google.com</quote>. But it would not - match <quote>www.google.de</quote>! So, apparently, we have these two actions - defined as exceptions to the general rules at the top somewhere in the lower - part of our <filename>default.action</filename> file, and - <quote>google.com</quote> is referenced somewhere in these latter sections. -</para> - -<para> - Then, for our <filename>user.action</filename> file, we again have no hits. - So there is nothing google-specific that we might have added to our own, local - configuration. If there was, those actions would over-rule any actions from - previously processed files, such as <filename>default.action</filename>. - <filename>user.action</filename> typically has the last word. This is the - best place to put hard and fast exceptions, -</para> - -<para> - And finally we pull it all together in the bottom section and summarize how - <application>Privoxy</application> is applying all its <quote>actions</quote> - to <quote>google.com</quote>: - -</para> - -<para> - <screen> - - Final results: - - -add-header - -block - +change-x-forwarded-for{block} - -client-header-filter{hide-tor-exit-notation} - -content-type-overwrite - -crunch-client-header - -crunch-if-none-match - -crunch-incoming-cookies - -crunch-outgoing-cookies - -crunch-server-header - +deanimate-gifs {last} - -downgrade-http-version - -fast-redirects - -filter {js-events} - -filter {content-cookies} - -filter {all-popups} - -filter {banners-by-link} - -filter {tiny-textforms} - -filter {frameset-borders} - -filter {demoronizer} - -filter {shockwave-flash} - -filter {quicktime-kioskmode} - -filter {fun} - -filter {crude-parental} - -filter {site-specifics} - -filter {js-annoyances} - -filter {html-annoyances} - +filter {refresh-tags} - -filter {unsolicited-popups} - +filter {img-reorder} - +filter {banners-by-size} - +filter {webbugs} - +filter {jumping-windows} - +filter {ie-exploits} - -filter {google} - -filter {yahoo} - -filter {msn} - -filter {blogspot} - -filter {no-ping} - -force-text-mode - -handle-as-empty-document - -handle-as-image - -hide-accept-language - -hide-content-disposition - +hide-from-header {block} - -hide-if-modified-since - +hide-referrer {forge} - -hide-user-agent - -limit-connect - -overwrite-last-modified - -prevent-compression - -redirect - -server-header-filter{xml-to-html} - -server-header-filter{html-to-xml} - -session-cookies-only - +set-image-blocker {pattern} </screen> -</para> - -<para> - Notice the only difference here to the previous listing, is to - <quote>fast-redirects</quote> and <quote>session-cookies-only</quote>, - which are activated specifically for this site in our configuration, - and thus show in the <quote>Final Results</quote>. -</para> - -<para> - Now another example, <quote>ad.doubleclick.net</quote>: -</para> - -<para> - <screen> - - { +block{Domains starts with "ad"} } - ad*. - - { +block{Domain contains "ad"} } - .ad. - - { +block{Doubleclick banner server} +handle-as-image } - .[a-vx-z]*.doubleclick.net -</screen> -</para> - -<para> - We'll just show the interesting part here - the explicit matches. It is - matched three different times. Two <quote>+block{}</quote> sections, - and a <quote>+block{} +handle-as-image</quote>, - which is the expanded form of one of our aliases that had been defined as: - <quote>+block-as-image</quote>. (<link - linkend="ALIASES"><quote>Aliases</quote></link> are defined in - the first section of the actions file and typically used to combine more - than one action.) -</para> - -<para> - Any one of these would have done the trick and blocked this as an unwanted - image. This is unnecessarily redundant since the last case effectively - would also cover the first. No point in taking chances with these guys - though ;-) Note that if you want an ad or obnoxious - URL to be invisible, it should be defined as <quote>ad.doubleclick.net</quote> - is done here -- as both a <link - linkend="BLOCK"><quote>+block{}</quote></link> - <emphasis>and</emphasis> an - <link linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link>. - The custom alias <quote><literal>+block-as-image</literal></quote> just - simplifies the process and make it more readable. -</para> - -<para> - One last example. Let's try <quote>http://www.example.net/adsl/HOWTO/</quote>. - This one is giving us problems. We are getting a blank page. Hmmm ... -</para> - -<para> - <screen> - - Matches for http://www.example.net/adsl/HOWTO/: - - In file: default.action <guibutton>[ View ]</guibutton> <guibutton>[ Edit ]</guibutton> - - {-add-header - -block - +change-x-forwarded-for{block} - -client-header-filter{hide-tor-exit-notation} - -content-type-overwrite - -crunch-client-header - -crunch-if-none-match - -crunch-incoming-cookies - -crunch-outgoing-cookies - -crunch-server-header - +deanimate-gifs - -downgrade-http-version - +fast-redirects {check-decoded-url} - -filter {js-events} - -filter {content-cookies} - -filter {all-popups} - -filter {banners-by-link} - -filter {tiny-textforms} - -filter {frameset-borders} - -filter {demoronizer} - -filter {shockwave-flash} - -filter {quicktime-kioskmode} - -filter {fun} - -filter {crude-parental} - -filter {site-specifics} - -filter {js-annoyances} - -filter {html-annoyances} - +filter {refresh-tags} - -filter {unsolicited-popups} - +filter {img-reorder} - +filter {banners-by-size} - +filter {webbugs} - +filter {jumping-windows} - +filter {ie-exploits} - -filter {google} - -filter {yahoo} - -filter {msn} - -filter {blogspot} - -filter {no-ping} - -force-text-mode - -handle-as-empty-document - -handle-as-image - -hide-accept-language - -hide-content-disposition - +hide-from-header{block} - +hide-referer{forge} - -hide-user-agent - -overwrite-last-modified - +prevent-compression - -redirect - -server-header-filter{xml-to-html} - -server-header-filter{html-to-xml} - +session-cookies-only - +set-image-blocker{blank} } - / - - { +block{Path contains "ads".} +handle-as-image } - /ads -</screen> -</para> - -<para> - Ooops, the <quote>/adsl/</quote> is matching <quote>/ads</quote> in our - configuration! But we did not want this at all! Now we see why we get the - blank page. It is actually triggering two different actions here, and - the effects are aggregated so that the URL is blocked, and &my-app; is told - to treat the block as if it were an image. But this is, of course, all wrong. - We could now add a new action below this (or better in our own - <filename>user.action</filename> file) that explicitly - <emphasis>un</emphasis> blocks ( - <link linkend="BLOCK"><quote>{-block}</quote></link>) paths with - <quote>adsl</quote> in them (remember, last match in the configuration - wins). There are various ways to handle such exceptions. Example: -</para> - -<para> - <screen> - - { -block } - /adsl -</screen> -</para> - -<para> - Now the page displays ;-) - Remember to flush your browser's caches when making these kinds of changes to - your configuration to insure that you get a freshly delivered page! Or, try - using <literal>Shift+Reload</literal>. -</para> - -<para> - But now what about a situation where we get no explicit matches like - we did with: -</para> - -<para> - <screen> - - { +block{Path starts with "ads".} +handle-as-image } - /ads -</screen> -</para> - -<para> - That actually was very helpful and pointed us quickly to where the problem - was. If you don't get this kind of match, then it means one of the default - rules in the first section of <filename>default.action</filename> is causing - the problem. This would require some guesswork, and maybe a little trial and - error to isolate the offending rule. One likely cause would be one of the - <link linkend="FILTER"><quote>+filter</quote></link> actions. - These tend to be harder to troubleshoot. - Try adding the URL for the site to one of aliases that turn off - <link linkend="FILTER"><quote>+filter</quote></link>: -</para> - -<para> - <screen> - - { shop } - .quietpc.com - .worldpay.com # for quietpc.com - .jungle.com - .scan.co.uk - .forbes.com -</screen> -</para> - -<para> - <quote><literal>{ shop }</literal></quote> is an <quote>alias</quote> that expands to - <quote><literal>{ -filter -session-cookies-only }</literal></quote>. - Or you could do your own exception to negate filtering: - -</para> - -<para> - <screen> - - { -filter } - # Disable ALL filter actions for sites in this section - .forbes.com - developer.ibm.com - localhost -</screen> -</para> - -<para> - This would turn off all filtering for these sites. This is best - put in <filename>user.action</filename>, for local site - exceptions. Note that when a simple domain pattern is used by itself (without - the subsequent path portion), all sub-pages within that domain are included - automatically in the scope of the action. -</para> - -<para> - Images that are inexplicably being blocked, may well be hitting the -<link linkend="FILTER-BANNERS-BY-SIZE"><quote>+filter{banners-by-size}</quote></link> - rule, which assumes - that images of certain sizes are ad banners (works well - <emphasis>most of the time</emphasis> since these tend to be standardized). -</para> - -<para> - <quote><literal>{ fragile }</literal></quote> is an alias that disables most - actions that are the most likely to cause trouble. This can be used as a - last resort for problem sites. -</para> -<para> - <screen> - - { fragile } - # Handle with care: easy to break - mail.google. - mybank.example.com</screen> -</para> - - -<para> - <emphasis>Remember to flush caches!</emphasis> Note that the - <literal>mail.google</literal> reference lacks the TLD portion (e.g. - <quote>.com</quote>). This will effectively match any TLD with - <literal>google</literal> in it, such as <literal>mail.google.de.</literal>, - just as an example. -</para> -<para> - If this still does not work, you will have to go through the remaining - actions one by one to find which one(s) is causing the problem. -</para> - -</sect2> - -</sect1> - -  - -</article> diff --git a/external/privoxy/doc/source/webserver/index.sgml b/external/privoxy/doc/source/webserver/index.sgml deleted file mode 100644 index ef63867..0000000 --- a/external/privoxy/doc/source/webserver/index.sgml +++ /dev/null @@ -1,372 +0,0 @@ -<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [ -<!entity % dummy "IGNORE"> -<!entity p-intro SYSTEM "privoxy.sgml"> -<!entity contacting SYSTEM "contacting.sgml"> -<!entity history SYSTEM "history.sgml"> -<!entity copyright SYSTEM "copyright.sgml"> -<!entity license SYSTEM "license.sgml"> -<!entity p-version "3.0.11"> -<!entity p-status "stable"> -<!entity % p-not-stable "IGNORE"> -<!entity % p-stable "INCLUDE"> -<!entity my-copy "©">  -<!entity % p-homepage "IGNORE">  -<!entity % p-index "IGNORE">  -]> - - -<article id="index"> -<artheader> - <title>Privoxy - <![%p-homepage;[Home Page]]><![%p-index;[The Privacy Enhancing Proxy]]></title> - <![%p-index;[<subtitle>Project Index Page v&p-version;</subtitle>]]> - - - - <keywordset> - <keyword>privoxy</keyword> <keyword>HTTP</keyword> <keyword>proxy</keyword> <keyword>privacy</keyword> - <keyword>popups</keyword> <keyword>po-ups</keyword> <keyword>HTML</keyword> <keyword>JavaScript</keyword> - <keyword>cleaning</keyword> <keyword>blocking</keyword> <keyword>cleaner</keyword> <keyword>blocker</keyword> - <keyword>filter</keyword> <keyword>proxy</keyword> <keyword>junk</keyword> <keyword>ad</keyword> - <keyword>advertisement</keyword> <keyword>banner</keyword> <keyword>webbugs</keyword> - <keyword>web-bugs</keyword> <keyword>werbung</keyword> <keyword>junkbusters</keyword> - <keyword>junkbuster</keyword> - </keywordset> - - <abstract> - -<![%dummy;[ - <para> - <comment> - This is here to keep vim syntax file from breaking :/ - If I knew enough to fix it, I would. - PLEASE DO NOT REMOVE! HB: hal(a)foobox.net - </comment> - </para> -]]> - - - &p-intro; - - -<![%p-homepage;[ - <para> - The most recent release is <ulink url="announce.txt">&p-version; (&p-status;)</ulink>. - </para> -]]> - - </abstract> -</artheader> - - - - -<sect1 renderas="sect2" id="download" label=""><title>Download</title> -<para> - <itemizedlist> - <listitem> - <para> - <ulink url="https://sourceforge.net/project/showfiles.php?group_id=11118">Download recent releases</ulink> - </para> - </listitem> -  - <listitem> - <para> - <ulink url="user-manual/quickstart.html">Quickstart after installation</ulink> - </para> - </listitem> - </itemizedlist> -</para> -</sect1> - -<sect1 renderas="sect2" id="docs" label=""><title>Documentation</title> -<para> - <itemizedlist> - <listitem> - <para> - <ulink url="user-manual/index.html">User manual</ulink> - </para> - </listitem> - <listitem> - <para> - <ulink url="faq/index.html">Frequently Asked Questions</ulink> - </para> - </listitem> - <listitem> - <para> - <ulink url="developer-manual/index.html">Developer Manual</ulink> - </para> - </listitem> - <listitem> - <para> - <ulink url="man-page/privoxy-man-page.html">Classic Man Page</ulink> - </para> - </listitem> - </itemizedlist> -</para> -</sect1> - -<sect1 renderas="sect2" id="moreinfo" label=""><title>More information</title> -<para> - <itemizedlist> - <listitem> - <para> - <ulink url="user-manual/contact.html">Support & Service</ulink> - </para> - </listitem> - <listitem> - <para> - <ulink url="user-manual/copyright.html">Copyright, License, History & Authors</ulink> - </para> - </listitem> - <listitem> - <para> - <ulink url="user-manual/introduction.html#FEATURES">List of (new) Features</ulink> - </para> - </listitem> - <listitem> - <para> - <ulink url="https://sourceforge.net/projects/ijbswa/">The project page</ulink> - </para> - </listitem> - <listitem> - <para> - <ulink url="user-manual/seealso.html">Related links</ulink> - </para> - </listitem> - <listitem> - <para> -  -  - <ulink url="http://privoxy.org/team/index.html">Pictures of the Privoxy Team</ulink> - </para> - </listitem> - </itemizedlist> -</para> -</sect1> - -<![%p-homepage;[ - -<sect1 label=""> - -<title></title> -<para> - -<informaltable frame=none label="" pgwide="1"> - <tgroup cols=1 align="center" colsep=1 rowsep=1> - <colspec colname=c1 align="center"> - <tbody> - <row> - <entry align="center">Privoxy is developed on:</entry> - </row> - <row> - <entry align="center"> - <ulink url="http://sourceforge.net/"> - <inlinegraphic fileref="http://sourceforge.net/sflogo.php?group_id=11118&type=1&dummy=.gif"></inlinegraphic> - </ulink> - </entry> - </row> - </tbody> - </tgroup> -</informaltable> -</para> -]]> - - - - -<![%p-index;[ -<sect1 label=""><title></title> - -]]> - - - - -<para> - <subscript> - Copyright __copy 2001-2009 by Privoxy Developers - </subscript> -</para> - -</sect1> - -  - -</article> diff --git a/external/privoxy/doc/webserver/README.txt b/external/privoxy/doc/webserver/README.txt deleted file mode 100644 index 4221e3a..0000000 --- a/external/privoxy/doc/webserver/README.txt +++ /dev/null @@ -1,9 +0,0 @@ -All files contained in this directory should eventually be -on the project's homepage - - ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/ - -which is indeed http://ijbswa.sourceforge.net -and http://www.privoxy.org/. - --Stefan, April 2002 \ No newline at end of file diff --git a/external/privoxy/doc/webserver/announce.txt b/external/privoxy/doc/webserver/announce.txt deleted file mode 100644 index be37205..0000000 --- a/external/privoxy/doc/webserver/announce.txt +++ /dev/null @@ -1,126 +0,0 @@ - Announcing Privoxy v.3.0.12 ------------------------------------------------------------------ - -Privoxy 3.0.12-stable is primarily a bugfix release. - -See http://www.privoxy.org/3.0.12/user-manual/whatsnew.html for details. - --------------------------------------------------------------------- -ChangeLog for Privoxy --------------------------------------------------------------------- -*** Version 3.0.12 *** - -- The socket-timeout option now also works on platforms whose - select() implementation modifies the timeout structure. - Previously the timeout was triggered even if the connection - didn't stall. Reported by cyberpatrol. -- The Connection: keep-alive code properly deals with files - larger than 2GB. Previously the connection was closed too - early. -- The content length for files above 2GB is logged correctly. -- The user-manual directive on the show-status page links to - the documentation location specified with the directive, - not to the Privoxy website. -- When running in daemon mode, Privoxy doesn't log anything - to the console unless there are errors before the logfile - has been opened. -- The show-status page prints warnings about invalid directives - on the same line as the directives themselves. -- Fixed several justified (but harmless) compiler warnings, - mostly on 64 bit platforms. -- The mingw32 version explicitly requests the default charset - to prevent display problems with some fonts available on more - recent Windows versions. Patch by Burberry. -- The mingw32 version uses the Privoxy icon in the alt-tab - windows. Patch by Burberry. -- The timestamp and the thread id is omitted in the "Fatal error" - message box on mingw32. -- Fixed two related mingw32-only buffer overflows. Triggering - them required control over the configuration file, therefore - this isn't seen as a security issue. -- In verbose mode, or if the new option --show-skipped-tests - is used, Privoxy-Regression-Test logs skipped tests and the - skip reason. - - ------------------------------------------------------------------ -About Privoxy: ------------------------------------------------------------------ - -Privoxy is a non-caching web proxy with advanced filtering capabilities for -enhancing privacy, modifying web page data and HTTP headers, controlling -access, and removing ads and other obnoxious Internet junk. Privoxy has a -flexible configuration and can be customized to suit individual needs and -tastes. It has application for both stand-alone systems and multi-user -networks. - -Privoxy is Free Software and licensed under the GPL2. - -Privoxy is an associated project of Software in the Public Interest (SPI). -Donations are welcome: http://www.privoxy.org/faq/general.html#DONATE - -At present, Privoxy is known to run on Windows(95, 98, ME, 2000, -XP, Vista), Linux (Ubuntu, RedHat, SuSE, Debian, Fedora, Gentoo and -others), Mac OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and -various other flavors of Unix. - -In addition to the core features of ad blocking and cookie management, -Privoxy provides many supplemental features, that give the end-user -more control, more privacy and more freedom: - - - * Can keep outgoing connections alive and reuse them later on. - - * Supports tagging which allows to change the behaviour based on client - and server headers. - - * Can be run as an "intercepting" proxy, which obviates the need to - configure browsers individually. - - * Sophisticated actions and filters for manipulating both server and - client headers. - - * Can be chained with other proxies. - - * Integrated browser based configuration and control utility at - http://config.privoxy.org/ (shortcut: http://p.p/) Browser-based - tracing of rule and filter effects. Remote toggling. - - * Web page filtering (text replacements, removes banners based on size, - invisible "web-bugs", JavaScript and HTML annoyances, pop-up windows, - etc.) - - * Modularized configuration that allows for standard settings and user - settings to reside in separate files, so that installing updated actions - files won't overwrite individual user settings. - - * Support for Perl Compatible Regular Expressions in the configuration - files, and a more sophisticated and flexible configuration syntax. - - * Improved cookie management features (e.g. session based cookies). - - * GIF de-animation. - - * Bypass many click-tracking scripts (avoids script redirection). - - * Multi-threaded (POSIX and native threads). - - * User-customizable HTML templates for most proxy-generated pages (e.g. - "blocked" page). - - * Auto-detection and re-reading of config file changes. - - * Improved signal handling, and a true daemon mode (Unix). - - * Every feature now controllable on a per-site or per-location basis, - configuration more powerful and versatile over-all. - - -Download location: - http://sourceforge.net/project/showfiles.php?group_id=11118 - -Home Page: - http://www.privoxy.org/ - - - - Privoxy Developers <ijbswa-developers(a)lists.sourceforge.net> diff --git a/external/privoxy/doc/webserver/developer-manual/coding.html b/external/privoxy/doc/webserver/developer-manual/coding.html deleted file mode 100644 index 48259ed..0000000 --- a/external/privoxy/doc/webserver/developer-manual/coding.html +++ /dev/null @@ -1,2602 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Coding Guidelines</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Documentation Guidelines" -HREF="documentation.html"><LINK -REL="NEXT" -TITLE="Testing Guidelines" -HREF="testing.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="documentation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="testing.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CODING" ->4. Coding Guidelines</A -></H1 -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S1" ->4.1. Introduction</A -></H2 -><P ->This set of standards is designed to make our lives easier. It is - developed with the simple goal of helping us keep the "new and improved - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->" consistent and reliable. Thus making - maintenance easier and increasing chances of success of the - project.</P -><P ->And that of course comes back to us as individuals. If we can - increase our development and product efficiencies then we can solve more - of the request for changes/improvements and in general feel good about - ourselves. ;-></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S2" ->4.2. Using Comments</A -></H2 -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S3" ->4.2.1. Comment, Comment, Comment</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Comment as much as possible without commenting the obvious. - For example do not comment "variable_a is equal to variable_b". - Instead explain why variable_a should be equal to the variable_b. - Just because a person can read code does not mean they will - understand why or what is being done. A reader may spend a lot - more time figuring out what is going on when a simple comment - or explanation would have prevented the extra research. Please - help your brother IJB'ers out!</P -><P ->The comments will also help justify the intent of the code. - If the comment describes something different than what the code - is doing then maybe a programming error is occurring.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->/* if page size greater than 1k ... */ -if ( page_length() > 1024 ) -{ - ... "block" the page up ... -} - -/* if page size is small, send it in blocks */ -if ( page_length() > 1024 ) -{ - ... "block" the page up ... -} - -This demonstrates 2 cases of "what not to do". The first is a -"syntax comment". The second is a comment that does not fit what -is actually being done.</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S4" ->4.2.2. Use blocks for comments</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Comments can help or they can clutter. They help when they - are differentiated from the code they describe. One line - comments do not offer effective separation between the comment - and the code. Block identifiers do, by surrounding the code - with a clear, definable pattern.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->/********************************************************************* - * This will stand out clearly in your code! - *********************************************************************/ -if ( this_variable == that_variable ) -{ - do_something_very_important(); -} - - -/* unfortunately, this may not */ -if ( this_variable == that_variable ) -{ - do_something_very_important(); -} - - -if ( this_variable == that_variable ) /* this may not either */ -{ - do_something_very_important(); -}</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Exception:</I -></SPAN -></P -><P ->If you are trying to add a small logic comment and do not - wish to "disrupt" the flow of the code, feel free to use a 1 - line comment which is NOT on the same line as the code.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S5" ->4.2.3. Keep Comments on their own line</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->It goes back to the question of readability. If the comment - is on the same line as the code it will be harder to read than - the comment that is on its own line.</P -><P ->There are three exceptions to this rule, which should be - violated freely and often: during the definition of variables, - at the end of closing braces, when used to comment - parameters.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->/********************************************************************* - * This will stand out clearly in your code, - * But the second example won't. - *********************************************************************/ -if ( this_variable == this_variable ) -{ - do_something_very_important(); -} - -if ( this_variable == this_variable ) /*can you see me?*/ -{ - do_something_very_important(); /*not easily*/ -} - - -/********************************************************************* - * But, the encouraged exceptions: - *********************************************************************/ -int urls_read = 0; /* # of urls read + rejected */ -int urls_rejected = 0; /* # of urls rejected */ - -if ( 1 == X ) -{ - do_something_very_important(); -} - - -short do_something_very_important( - short firstparam, /* represents something */ - short nextparam /* represents something else */ ) -{ - ...code here... - -} /* -END- do_something_very_important */</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S6" ->4.2.4. Comment each logical step</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Logical steps should be commented to help others follow the - intent of the written code and comments will make the code more - readable.</P -><P ->If you have 25 lines of code without a comment, you should - probably go back into it to see where you forgot to put - one.</P -><P ->Most "for", "while", "do", etc... loops _probably_ need a - comment. After all, these are usually major logic - containers.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S7" ->4.2.5. Comment All Functions Thoroughly</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->A reader of the code should be able to look at the comments - just prior to the beginning of a function and discern the - reason for its existence and the consequences of using it. The - reader should not have to read through the code to determine if - a given function is safe for a desired use. The proper - information thoroughly presented at the introduction of a - function not only saves time for subsequent maintenance or - debugging, it more importantly aids in code reuse by allowing a - user to determine the safety and applicability of any function - for the problem at hand. As a result of such benefits, all - functions should contain the information presented in the - addendum section of this document.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S8" ->4.2.6. Comment at the end of braces if the - content is more than one screen length</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Each closing brace should be followed on the same line by a - comment that describes the origination of the brace if the - original brace is off of the screen, or otherwise far away from - the closing brace. This will simplify the debugging, - maintenance, and readability of the code.</P -><P ->As a suggestion , use the following flags to make the - comment and its brace more readable:</P -><P ->use following a closing brace: } /* -END- if() or while () - or etc... */</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->if ( 1 == X ) -{ - do_something_very_important(); - ...some long list of commands... -} /* -END- if x is 1 */ - -or: - -if ( 1 == X ) -{ - do_something_very_important(); - ...some long list of commands... -} /* -END- if ( 1 == X ) */</PRE -></TD -></TR -></TABLE -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S9" ->4.3. Naming Conventions</A -></H2 -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S10" ->4.3.1. Variable Names</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Use all lowercase, and separate words via an underscore - ('_'). Do not start an identifier with an underscore. (ANSI C - reserves these for use by the compiler and system headers.) Do - not use identifiers which are reserved in ANSI C++. (E.g. - template, class, true, false, ...). This is in case we ever - decide to port Privoxy to C++.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->int ms_iis5_hack = 0;</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->int msiis5hack = 0; int msIis5Hack = 0;</PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S11" ->4.3.2. Function Names</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Use all lowercase, and separate words via an underscore - ('_'). Do not start an identifier with an underscore. (ANSI C - reserves these for use by the compiler and system headers.) Do - not use identifiers which are reserved in ANSI C++. (E.g. - template, class, true, false, ...). This is in case we ever - decide to port Privoxy to C++.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->int load_some_file( struct client_state *csp )</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->int loadsomefile( struct client_state *csp ) -int loadSomeFile( struct client_state *csp )</PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S12" ->4.3.3. Header file prototypes</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Use a descriptive parameter name in the function prototype - in header files. Use the same parameter name in the header file - that you use in the c file.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->(.h) extern int load_aclfile( struct client_state *csp ); -(.c) int load_aclfile( struct client_state *csp )</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -> -<TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->(.h) extern int load_aclfile( struct client_state * ); or -(.h) extern int load_aclfile(); -(.c) int load_aclfile( struct client_state *csp )</PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S13" ->4.3.4. Enumerations, and #defines</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Use all capital letters, with underscores between words. Do - not start an identifier with an underscore. (ANSI C reserves - these for use by the compiler and system headers.)</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->(enumeration) : enum Boolean { FALSE, TRUE }; -(#define) : #define DEFAULT_SIZE 100;</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> We have a standard naming scheme for #defines - that toggle a feature in the preprocessor: FEATURE_>, where - > is a short (preferably 1 or 2 word) description.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->#define FEATURE_FORCE 1 - -#ifdef FEATURE_FORCE -#define FORCE_PREFIX blah -#endif /* def FEATURE_FORCE */</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S14" ->4.3.5. Constants</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Spell common words out entirely (do not remove vowels).</P -><P ->Use only widely-known domain acronyms and abbreviations. - Capitalize all letters of an acronym.</P -><P ->Use underscore (_) to separate adjacent acronyms and - abbreviations. Never terminate a name with an underscore.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->#define USE_IMAGE_LIST 1</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->#define USE_IMG_LST 1 or -#define _USE_IMAGE_LIST 1 or -#define USE_IMAGE_LIST_ 1 or -#define use_image_list 1 or -#define UseImageList 1</PRE -></TD -></TR -></TABLE -></P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S15" ->4.4. Using Space</A -></H2 -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S16" ->4.4.1. Put braces on a line by themselves.</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->The brace needs to be on a line all by itself, not at the - end of the statement. Curly braces should line up with the - construct that they're associated with. This practice makes it - easier to identify the opening and closing braces for a - block.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->if ( this == that ) -{ - ... -}</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P ->if ( this == that ) { ... }</P -><P ->or</P -><P ->if ( this == that ) { ... }</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> In the special case that the if-statement is - inside a loop, and it is trivial, i.e. it tests for a - condition that is obvious from the purpose of the block, - one-liners as above may optically preserve the loop structure - and make it easier to read.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> developer-discretion.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example exception:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->while ( more lines are read ) -{ - /* Please document what is/is not a comment line here */ - if ( it's a comment ) continue; - - do_something( line ); -}</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S17" ->4.4.2. ALL control statements should have a - block</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Using braces to make a block will make your code more - readable and less prone to error. All control statements should - have a block defined.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->if ( this == that ) -{ - do_something(); - do_something_else(); -}</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P ->if ( this == that ) do_something(); do_something_else();</P -><P ->or</P -><P ->if ( this == that ) do_something();</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> The first example in "Instead of" will execute - in a manner other than that which the developer desired (per - indentation). Using code braces would have prevented this - "feature". The "explanation" and "exception" from the point - above also applies.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S18" ->4.4.3. Do not belabor/blow-up boolean - expressions</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->structure->flag = ( condition );</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P ->if ( condition ) { structure->flag = 1; } else { - structure->flag = 0; }</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> The former is readable and concise. The later - is wordy and inefficient. Please assume that any developer new - to the project has at least a "good" knowledge of C/C++. (Hope - I do not offend by that last comment ... 8-)</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S19" ->4.4.4. Use white space freely because it is - free</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Make it readable. The notable exception to using white space - freely is listed in the next guideline.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->int first_value = 0; -int some_value = 0; -int another_value = 0; -int this_variable = 0; - -if ( this_variable == this_variable ) - -first_value = old_value + ( ( some_value - another_value ) - whatever )</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S20" ->4.4.5. Don't use white space around structure - operators</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->- structure pointer operator ( "->" ) - member operator ( - "." ) - functions and parentheses</P -><P ->It is a general coding practice to put pointers, references, - and function parentheses next to names. With spaces, the - connection between the object and variable/function name is not - as clear.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->a_struct->a_member; -a_struct.a_member; -function_name();</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -> a_struct -> a_member; a_struct . a_member; - function_name ();</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S21" ->4.4.6. Make the last brace of a function stand - out</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->int function1( ... ) -{ - ...code... - return( ret_code ); - -} /* -END- function1 */ - - -int function2( ... ) -{ -} /* -END- function2 */</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P ->int function1( ... ) { ...code... return( ret_code ); } int - function2( ... ) { }</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> Use 1 blank line before the closing brace and 2 - lines afterward. This makes the end of function standout to - the most casual viewer. Although function comments help - separate functions, this is still a good coding practice. In - fact, I follow these rules when using blocks in "for", "while", - "do" loops, and long if {} statements too. After all whitespace - is free!</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> developer-discretion on the number of blank - lines. Enforced is the end of function comments.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S22" ->4.4.7. Use 3 character indentions</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->If some use 8 character TABs and some use 3 character TABs, - the code can look *very* ragged. So use 3 character indentions - only. If you like to use TABs, pass your code through a filter - such as "expand -t3" before checking in your code.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->static const char * const url_code_map[256] = -{ - NULL, ... -}; - - -int function1( ... ) -{ - if ( 1 ) - { - return( ALWAYS_TRUE ); - } - else - { - return( HOW_DID_YOU_GET_HERE ); - } - - return( NEVER_GETS_HERE ); - -}</PRE -></TD -></TR -></TABLE -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S23" ->4.5. Initializing</A -></H2 -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S24" ->4.5.1. Initialize all variables</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Do not assume that the variables declared will not be used - until after they have been assigned a value somewhere else in - the code. Remove the chance of accidentally using an unassigned - variable.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->short a_short = 0; -float a_float = 0; -struct *ptr = NULL;</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> It is much easier to debug a SIGSEGV if the - message says you are trying to access memory address 00000000 - and not 129FA012; or array_ptr[20] causes a SIGSEV vs. - array_ptr[0].</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> developer-discretion if and only if the - variable is assigned a value "shortly after" declaration.</P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S25" ->4.6. Functions</A -></H2 -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S26" ->4.6.1. Name functions that return a boolean as a - question.</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Value should be phrased as a question that would logically - be answered as a true or false statement</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->should_we_block_this(); -contains_an_image(); -is_web_page_blank();</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S27" ->4.6.2. Always specify a return type for a - function.</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->The default return for a function is an int. To avoid - ambiguity, create a return for a function when the return has a - purpose, and create a void return type if the function does not - need to return anything.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S28" ->4.6.3. Minimize function calls when iterating by - using variables</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->It is easy to write the following code, and a clear argument - can be made that the code is easy to understand:</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->for ( size_t cnt = 0; cnt < block_list_length(); cnt++ ) -{ - .... -}</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> Unfortunately, this makes a function call for - each and every iteration. This increases the overhead in the - program, because the compiler has to look up the function each - time, call it, and return a value. Depending on what occurs in - the block_list_length() call, it might even be creating and - destroying structures with each iteration, even though in each - case it is comparing "cnt" to the same value, over and over. - Remember too - even a call to block_list_length() is a function - call, with the same overhead.</P -><P ->Instead of using a function call during the iterations, - assign the value to a variable, and evaluate using the - variable.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->size_t len = block_list_length(); - -for ( size_t cnt = 0; cnt < len; cnt++ ) -{ - .... -}</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Exceptions:</I -></SPAN -> if the value of block_list_length() - *may* change or could *potentially* change, then you must code the - function call in the for/while loop.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S29" ->4.6.4. Pass and Return by Const Reference</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->This allows a developer to define a const pointer and call - your function. If your function does not have the const - keyword, we may not be able to use your function. Consider - strcmp, if it were defined as: extern int strcmp( char *s1, - char *s2 );</P -><P ->I could then not use it to compare argv's in main: int main( - int argc, const char *argv[] ) { strcmp( argv[0], "privoxy" - ); }</P -><P ->Both these pointers are *const*! If the c runtime library - maintainers do it, we should too.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S30" ->4.6.5. Pass and Return by Value</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Most structures cannot fit onto a normal stack entry (i.e. - they are not 4 bytes or less). Aka, a function declaration - like: int load_aclfile( struct client_state csp )</P -><P ->would not work. So, to be consistent, we should declare all - prototypes with "pass by value": int load_aclfile( struct - client_state *csp )</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S31" ->4.6.6. Names of include files</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Your include statements should contain the file name without - a path. The path should be listed in the Makefile, using -I as - processor directive to search the indicated paths. An exception - to this would be for some proprietary software that utilizes a - partial path to distinguish their header files from system or - other header files.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->#include <iostream.h> /* This is not a local include */ -#include "config.h" /* This IS a local include */</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Exception:</I -></SPAN -></P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->/* This is not a local include, but requires a path element. */ -#include <sys/fileName.h></PRE -></TD -></TR -></TABLE -></P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> Please! do not add "-I." to the Makefile - without a _very_ good reason. This duplicates the #include - "file.h" behavior.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S32" ->4.6.7. Provide multiple inclusion - protection</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Prevents compiler and linker errors resulting from - redefinition of items.</P -><P ->Wrap each header file with the following syntax to prevent - multiple inclusions of the file. Of course, replace PROJECT_H - with your file name, with "." Changed to "_", and make it - uppercase.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->#ifndef PROJECT_H_INCLUDED -#define PROJECT_H_INCLUDED - ... -#endif /* ndef PROJECT_H_INCLUDED */</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S33" ->4.6.8. Use `extern "C"` when appropriate</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->If our headers are included from C++, they must declare our - functions as `extern "C"`. This has no cost in C, but increases - the potential re-usability of our code.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->#ifdef __cplusplus -extern "C" -{ -#endif /* def __cplusplus */ - -... function definitions here ... - -#ifdef __cplusplus -} -#endif /* def __cplusplus */</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S34" ->4.6.9. Where Possible, Use Forward Struct - Declaration Instead of Includes</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Useful in headers that include pointers to other struct's. - Modifications to excess header files may cause needless - compiles.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->/********************************************************************* - * We're avoiding an include statement here! - *********************************************************************/ -struct file_list; -extern file_list *xyz;</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> If you declare "file_list xyz;" (without the - pointer), then including the proper header file is necessary. - If you only want to prototype a pointer, however, the header - file is unnecessary.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> Use with discretion.</P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S35" ->4.7. General Coding Practices</A -></H2 -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S36" ->4.7.1. Turn on warnings</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation</I -></SPAN -></P -><P ->Compiler warnings are meant to help you find bugs. You - should turn on as many as possible. With GCC, the switch is - "-Wall". Try and fix as many warnings as possible.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S37" ->4.7.2. Provide a default case for all switch - statements</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->What you think is guaranteed is never really guaranteed. The - value that you don't think you need to check is the one that - someday will be passed. So, to protect yourself from the - unknown, always have a default step in a switch statement.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->switch( hash_string( cmd ) ) -{ - case hash_actions_file : - ... code ... - break; - - case hash_confdir : - ... code ... - break; - - default : - log_error( ... ); - ... anomaly code goes here ... - continue; / break; / exit( 1 ); / etc ... - -} /* end switch( hash_string( cmd ) ) */</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> If you already have a default condition, you - are obviously exempt from this point. Of note, most of the - WIN32 code calls `DefWindowProc' after the switch statement. - This API call *should* be included in a default statement.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Another Note:</I -></SPAN -> This is not so much a readability issue - as a robust programming issue. The "anomaly code goes here" may - be no more than a print to the STDERR stream (as in - load_config). Or it may really be an abort condition.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> Programmer discretion is advised.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S38" ->4.7.3. Try to avoid falling through cases in a - switch statement.</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->In general, you will want to have a 'break' statement within - each 'case' of a switch statement. This allows for the code to - be more readable and understandable, and furthermore can - prevent unwanted surprises if someone else later gets creative - and moves the code around.</P -><P ->The language allows you to plan the fall through from one - case statement to another simply by omitting the break - statement within the case statement. This feature does have - benefits, but should only be used in rare cases. In general, - use a break statement for each case statement.</P -><P ->If you choose to allow fall through, you should comment both - the fact of the fall through and reason why you felt it was - necessary.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S39" ->4.7.4. Use 'long' or 'short' Instead of - 'int'</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->On 32-bit platforms, int usually has the range of long. On - 16-bit platforms, int has the range of short.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> open-to-debate. In the case of most FSF - projects (including X/GNU-Emacs), there are typedefs to int4, - int8, int16, (or equivalence ... I forget the exact typedefs - now). Should we add these to IJB now that we have a "configure" - script?</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S40" ->4.7.5. Don't mix size_t and other types</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->The type of size_t varies across platforms. Do not make - assumptions about whether it is signed or unsigned, or about - how long it is. Do not compare a size_t against another - variable of a different type (or even against a constant) - without casting one of the values.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S41" ->4.7.6. Declare each variable and struct on its - own line.</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->It can be tempting to declare a series of variables all on - one line. Don't.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->long a = 0; -long b = 0; -long c = 0;</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Instead of:</I -></SPAN -></P -><P ->long a, b, c;</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -> - there is more room for comments on the - individual variables - easier to add new variables without - messing up the original ones - when searching on a variable to - find its type, there is less clutter to "visually" - eliminate</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Exceptions:</I -></SPAN -> when you want to declare a bunch of loop - variables or other trivial variables; feel free to declare them - on one line. You should, although, provide a good comment on - their functions.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> developer-discretion.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S42" ->4.7.7. Use malloc/zalloc sparingly</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->Create a local struct (on the stack) if the variable will - live and die within the context of one function call.</P -><P ->Only "malloc" a struct (on the heap) if the variable's life - will extend beyond the context of one function call.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->If a function creates a struct and stores a pointer to it in a -list, then it should definitely be allocated via `malloc'.</PRE -></TD -></TR -></TABLE -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S43" ->4.7.8. The Programmer Who Uses 'malloc' is - Responsible for Ensuring 'free'</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->If you have to "malloc" an instance, you are responsible for - insuring that the instance is `free'd, even if the deallocation - event falls within some other programmer's code. You are also - responsible for ensuring that deletion is timely (i.e. not too - soon, not too late). This is known as "low-coupling" and is a - "good thing (tm)". You may need to offer a - free/unload/destructor type function to accommodate this.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->int load_re_filterfile( struct client_state *csp ) { ... } -static void unload_re_filterfile( void *f ) { ... }</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Exceptions:</I -></SPAN -></P -><P ->The developer cannot be expected to provide `free'ing - functions for C run-time library functions ... such as - `strdup'.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Status:</I -></SPAN -> developer-discretion. The "main" use of this - standard is for allocating and freeing data structures (complex - or nested).</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S44" ->4.7.9. Add loaders to the `file_list' structure - and in order</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->I have ordered all of the "blocker" file code to be in alpha - order. It is easier to add/read new blockers when you expect a - certain order.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> It may appear that the alpha order is broken in - places by POPUP tests coming before PCRS tests. But since - POPUPs can also be referred to as KILLPOPUPs, it is clear that - it should come first.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="S45" ->4.7.10. "Uncertain" new code and/or changes to - existing code, use FIXME or XXX</A -></H3 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Explanation:</I -></SPAN -></P -><P ->If you have enough confidence in new code or confidence in - your changes, but are not *quite* sure of the repercussions, - add this:</P -><P ->/* FIXME: this code has a logic error on platform XYZ, * - attempting to fix */ #ifdef PLATFORM ...changed code here... - #endif</P -><P ->or:</P -><P ->/* FIXME: I think the original author really meant this... - */ ...changed code here...</P -><P ->or:</P -><P ->/* FIXME: new code that *may* break something else... */ - ...new code here...</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> If you make it clear that this may or may not - be a "good thing (tm)", it will be easier to identify and - include in the project (or conversely exclude from the - project).</P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="S46" ->4.8. Addendum: Template for files and function - comment blocks:</A -></H2 -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example for file comments:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->const char FILENAME_rcs[] = "$Id: coding.html,v 1.42 2009/03/21 12:59:32 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/doc/webserver/developer-manual/coding.html,v $ - * - * Purpose : (Fill me in with a good description!) - * - * Copyright : Written by and Copyright (C) 2001-2009 - * the Privoxy team. http://www.privoxy.org/ - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 , - * USA - * - * Revisions : - * $Log: coding.html,v $ - * Revision 1.42 2009/03/21 12:59:32 fabiankeil - * Rebuild with recent changes. - * - * - *********************************************************************/ - - -#include "config.h" - - ...necessary include files for us to do our work... - -const char FILENAME_h_rcs[] = FILENAME_H_VERSION;</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> This declares the rcs variables that should be - added to the "show-proxy-args" page. If this is a brand new - creation by you, you are free to change the "Copyright" section - to represent the rights you wish to maintain.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> The formfeed character that is present right - after the comment flower box is handy for (X|GNU)Emacs users to - skip the verbiage and get to the heart of the code (via - `forward-page' and `backward-page'). Please include it if you - can.</P -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example for file header comments:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->#ifndef _FILENAME_H -#define _FILENAME_H -#define FILENAME_H_VERSION "$Id: coding.html,v 1.42 2009/03/21 12:59:32 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/doc/webserver/developer-manual/coding.html,v $ - * - * Purpose : (Fill me in with a good description!) - * - * Copyright : Written by and Copyright (C) 2001-2009 - * the Privoxy team. http://www.privoxy.org/ - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html - * or write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 , - * USA - * - * Revisions : - * $Log: coding.html,v $ - * Revision 1.42 2009/03/21 12:59:32 fabiankeil - * Rebuild with recent changes. - * - * - *********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - - ... function headers here ... - - -/* Revision control strings from this header and associated .c file */ -extern const char FILENAME_rcs[]; -extern const char FILENAME_h_rcs[]; - - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef _FILENAME_H */ - -/* - Local Variables: - tab-width: 3 - end: -*/</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Example for function comments:</I -></SPAN -></P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" ->/********************************************************************* - * - * Function : FUNCTION_NAME - * - * Description : (Fill me in with a good description!) - * - * parameters : - * 1 : param1 = pointer to an important thing - * 2 : x = pointer to something else - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int FUNCTION_NAME( void *param1, const char *x ) -{ - ... - return( 0 ); - -}</PRE -></TD -></TR -></TABLE -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Note:</I -></SPAN -> If we all follow this practice, we should be - able to parse our code to create a "self-documenting" web - page.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="documentation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="testing.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Documentation Guidelines</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Testing Guidelines</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/contact.html b/external/privoxy/doc/webserver/developer-manual/contact.html deleted file mode 100644 index 3d8ddc0..0000000 --- a/external/privoxy/doc/webserver/developer-manual/contact.html +++ /dev/null @@ -1,510 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Contacting the developers, Bug Reporting and Feature Requests</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Update the Webserver" -HREF="webserver-update.html"><LINK -REL="NEXT" -TITLE="Privoxy Copyright, License and History" -HREF="copyright.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="webserver-update.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="copyright.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CONTACT" ->8. Contacting the developers, Bug Reporting and Feature Requests</A -></H1 -><P -> We value your feedback. In fact, we rely on it to improve - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and its configuration. - However, please note the following hints, so we can - provide you with the best support:</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-SUPPORT" ->8.1. Get Support</A -></H2 -><P -> For casual users, our - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=211118" -TARGET="_top" ->support forum at SourceForge</A -> - is probably best suited: - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=211118" -TARGET="_top" ->http://sourceforge.net/tracker/?group_id=11118&atid=211118</A -></P -><P -> All users are of course welcome to discuss their issues on the <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-users" -TARGET="_top" ->users - mailing list</A ->, where the developers also hang around.</P -><P -> Please don't sent private support requests to individual Privoxy - developers, either use the mailing lists or the support trackers.</P -><P -> Note that the Privoxy mailing lists are moderated. Posts from unsubscribed - addresses have to be accepted manually by a moderator. This may cause a - delay of several days and if you use a subject that doesn't clearly - mention Privoxy or one of its features, your message may be accidentally - discarded as spam.</P -><P -> If you aren't subscribed, you should therefore spend a few seconds - to come up with a proper subject. Additionally you should make it clear - that you want to get CC'd. Otherwise some responses will be directed to - the mailing list only, and you won't see them.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="REPORTING" ->8.2. Reporting Problems</A -></H2 -><P -><SPAN -CLASS="QUOTE" ->"Problems"</SPAN -> for our purposes, come in two forms:</P -><P -></P -><UL -><LI -><P -> Configuration issues, such as ads that slip through, or sites that - don't function properly due to one <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - <SPAN -CLASS="QUOTE" ->"action"</SPAN -> or another being turned <SPAN -CLASS="QUOTE" ->"on"</SPAN ->. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"Bugs"</SPAN -> in the programming code that makes up - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, such as that might cause a crash. - </P -></LI -></UL -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="CONTACT-ADS" ->8.2.1. Reporting Ads or Other Configuration Problems</A -></H3 -><P -> Please send feedback on ads that slipped through, innocent images that were - blocked, sites that don't work properly, and other configuration related problem of - <TT -CLASS="FILENAME" ->default.action</TT -> file, to - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=460288" -TARGET="_top" -> http://sourceforge.net/tracker/?group_id=11118&atid=460288</A ->, - the Actions File Tracker.</P -><P -> New, improved <TT -CLASS="FILENAME" ->default.action</TT -> files may occasionally be made - available based on your feedback. These will be announced on the <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce" -TARGET="_top" ->ijbswa-announce</A -> - list and available from our the <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->files section</A -> of - our <A -HREF="http://sf.net/projects/ijbswa/" -TARGET="_top" ->project page</A ->.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="CONTACT-BUGS" ->8.2.2. Reporting Bugs</A -></H3 -><P -> Please report all bugs through our bug tracker: - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=111118" -TARGET="_top" ->http://sourceforge.net/tracker/?group_id=11118&atid=111118</A ->. </P -><P -> Before doing so, please make sure that the bug has <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not already been submitted</I -></SPAN -> - and observe the additional hints at the top of the <A -HREF="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=111118" -TARGET="_top" ->submit - form</A ->. If already submitted, please feel free to add any info to the - original report that might help to solve the issue.</P -><P -> Please try to verify that it is a <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> bug, - and not a browser or site bug or documented behaviour that just happens - to be different than what you expected. If unsure, - try <A -HREF="http://config.privoxy.org/toggle?set=disable" -TARGET="_top" ->toggling - off</A -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, and see if the problem persists.</P -><P -> If you are using your own custom configuration, please try - the stock configs to see if the problem is configuration related. - If you're having problems with a feature that is disabled by default, - please ask around on the mailing list if others can reproduce the problem.</P -><P -> If you aren't using the latest Privoxy version, the bug may have been found - and fixed in the meantime. We would appreciate if you could take the time - to <A -HREF="http://www.privoxy.org/user-manual/installation.html" -TARGET="_top" ->upgrade - to the latest version</A -> (or even the latest CVS snapshot) and verify - that your bug still exists.</P -><P ->Please be sure to provide the following information:</P -><P -> <P -></P -><UL -><LI -><P -> The exact <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version you are using - (if you got the source from CVS, please also provide the source code revisions - as shown in <A -HREF="http://config.privoxy.org/show-version" -TARGET="_top" ->http://config.privoxy.org/show-version</A ->). - </P -></LI -><LI -><P -> The operating system and versions you run - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on, (e.g. <SPAN -CLASS="APPLICATION" ->Windows - XP SP2</SPAN ->), if you are using a Unix flavor, - sending the output of <SPAN -CLASS="QUOTE" ->"uname -a"</SPAN -> should do, - in case of GNU/Linux, please also name the distribution. - </P -></LI -><LI -><P -> The name, platform, and version of the <SPAN -CLASS="APPLICATION" ->browser</SPAN -> - you were using (e.g. <SPAN -CLASS="APPLICATION" ->Internet Explorer v5.5</SPAN -> for Mac). - </P -></LI -><LI -><P -> The URL where the problem occurred, or some way for us to duplicate the - problem (e.g. <TT -CLASS="LITERAL" ->http://somesite.example.com/?somethingelse=123</TT ->). - </P -></LI -><LI -><P -> Whether your version of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is one supplied - by the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developers via SourceForge, - or if you got your copy somewhere else. - </P -></LI -><LI -><P -> Whether you are using <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in tandem with - another proxy such as <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->. If so, please - temporary disable the other proxy to see if the symptoms change. - </P -></LI -><LI -><P -> Whether you are using a personal firewall product. If so, does - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> work without it? - </P -></LI -><LI -><P -> Any other pertinent information to help identify the problem such as config - or log file excerpts (yes, you should have log file entries for each - action taken). - </P -></LI -></UL -></P -><P -> You don't have to tell us your actual name when filing a problem - report, but please use a nickname so we can differentiate between - your messages and the ones entered by other "anonymous" users that - may respond to your request if they have the same problem or already - found a solution.</P -><P -> Please also check the status of your request a few days after submitting - it, as we may request additional information. If you use a SF id, - you should automatically get a mail when someone responds to your request.</P -><P -> The <A -HREF="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT" -TARGET="_top" ->appendix - of the Privoxy User Manual</A -> also has helpful information - on understanding <TT -CLASS="LITERAL" ->actions</TT ->, and <TT -CLASS="LITERAL" ->action</TT -> debugging. </P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-FEATURE" ->8.3. Request New Features</A -></H2 -><P -> You are welcome to submit ideas on new features or other proposals - for improvement through our feature request tracker at - <A -HREF="http://sourceforge.net/tracker/?atid=361118&group_id=11118" -TARGET="_top" ->http://sourceforge.net/tracker/?atid=361118&group_id=11118</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-OTHER" ->8.4. Other</A -></H2 -><P ->For any other issues, feel free to use the mailing lists. Technically interested users -and people who wish to contribute to the project are also welcome on the developers list! -You can find an overview of all <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->-related mailing lists, -including list archives, at: -<A -HREF="http://sourceforge.net/mail/?group_id=11118" -TARGET="_top" ->http://sourceforge.net/mail/?group_id=11118</A ->.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="webserver-update.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="copyright.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Update the Webserver</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Privoxy Copyright, License and History</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/copyright.html b/external/privoxy/doc/webserver/developer-manual/copyright.html deleted file mode 100644 index 5fbe9a4..0000000 --- a/external/privoxy/doc/webserver/developer-manual/copyright.html +++ /dev/null @@ -1,298 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy Copyright, License and History</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Contacting the developers, Bug Reporting and Feature Requests" -HREF="contact.html"><LINK -REL="NEXT" -TITLE="See also" -HREF="seealso.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="contact.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="seealso.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="COPYRIGHT" ->9. Privoxy Copyright, License and History</A -></H1 -><P -> Copyright © 2001-2009 by Privoxy Developers <CODE -CLASS="EMAIL" -><<A -HREF="mailto:ijbswa-developers@lists.sourceforge.net" ->ijbswa-developers(a)lists.sourceforge.net</A ->></CODE -></P -><P -> Some source code is based on code Copyright © 1997 by Anonymous Coders - and Junkbusters, Inc. and licensed under the <I -CLASS="CITETITLE" ->GNU General Public - License</I ->.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN1223" ->9.1. License</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is free software; you can - redistribute it and/or modify it under the terms of the - <I -CLASS="CITETITLE" ->GNU General Public License</I ->, version 2, - as published by the Free Software Foundation.</P -><P -> This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" -> <I -CLASS="CITETITLE" ->GNU General Public License</I -></A -> for details.</P -><P -> You should have received a copy of the <I -CLASS="CITETITLE" ->GNU GPL</I -> - along with this program; if not, write to the <P -CLASS="ADDRESS" -> Free Software<br> - Foundation, Inc. <SPAN -CLASS="STREET" ->51 Franklin Street, Fifth Floor</SPAN -><br> - <SPAN -CLASS="CITY" ->Boston</SPAN ->, <SPAN -CLASS="STATE" ->MA</SPAN -> <SPAN -CLASS="POSTCODE" ->02110-1301</SPAN -><br> - <SPAN -CLASS="COUNTRY" ->USA</SPAN -> </P -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN1239" ->9.2. History</A -></H2 -><P -> A long time ago, there was the - <A -HREF="http://www.junkbusters.com/ijb.html" -TARGET="_top" -><SPAN -CLASS="APPLICATION" ->Internet Junkbuster</SPAN -></A ->, - by Anonymous Coders and <A -HREF="http://www.junkbusters.com/" -TARGET="_top" ->Junkbusters - Corporation</A ->. This saved many users a lot of pain in the early days of - web advertising and user tracking.</P -><P -> But the web, its protocols and standards, and with it, the techniques for - forcing ads on users, give up autonomy over their browsing, and - for tracking them, keeps evolving. Unfortunately, the <SPAN -CLASS="APPLICATION" ->Internet - Junkbuster</SPAN -> did not. Version 2.0.2, published in 1998, was - (and is) the last official - <A -HREF="http://www.junkbusters.com/ijbdist.html#release" -TARGET="_top" ->release</A -> - available from <A -HREF="http://www.junkbusters.com" -TARGET="_top" ->Junkbusters Corporation</A ->. - Fortunately, it had been released under the GNU - <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" ->GPL</A ->, - which allowed further development by others.</P -><P -> So Stefan Waldherr started maintaining an improved version of the - software, to which eventually a number of people contributed patches. - It could already replace banners with a transparent image, and had a first - version of pop-up killing, but it was still very closely based on the - original, with all its limitations, such as the lack of HTTP/1.1 support, - flexible per-site configuration, or content modification. The last release - from this effort was version 2.0.2-10, published in 2000.</P -><P -> Then, some - <A -HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS" -TARGET="_top" ->developers</A -> - picked up the thread, and started turning the software inside out, upside down, - and then reassembled it, adding many - <A -HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES" -TARGET="_top" ->new - features</A -> along the way.</P -><P -> The result of this is <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, whose first - stable version, 3.0, was released August, 2002. - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="contact.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="seealso.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Contacting the developers, Bug Reporting and Feature Requests</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->See also</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/cvs.html b/external/privoxy/doc/webserver/developer-manual/cvs.html deleted file mode 100644 index db1fb9e..0000000 --- a/external/privoxy/doc/webserver/developer-manual/cvs.html +++ /dev/null @@ -1,330 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->The CVS Repository</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Introduction" -HREF="introduction.html"><LINK -REL="NEXT" -TITLE="Documentation Guidelines" -HREF="documentation.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="introduction.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="documentation.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CVS" ->2. The CVS Repository</A -></H1 -><P -> If you become part of the active development team, you will eventually - need write access to our holy grail, the CVS repository. One of the - team members will need to set this up for you. Please read - this chapter completely before accessing via CVS. - </P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CVSACCESS" ->2.1. Access to CVS</A -></H2 -><P -> The project's CVS repository is hosted on - <A -HREF="http://sourceforge.net/" -TARGET="_top" ->SourceForge.</A -> - Please refer to the chapters 6 and 7 in - <A -HREF="http://sourceforge.net/docman/?group_id=1" -TARGET="_top" ->SF's site - documentation</A -> for the technical access details for your - operating system. For historical reasons, the CVS server is - called <TT -CLASS="LITERAL" ->ijbswa.cvs.sourceforge.net</TT ->, the repository is - called <TT -CLASS="LITERAL" ->ijbswa</TT ->, and the source tree module is called - <TT -CLASS="LITERAL" ->current</TT ->. - </P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CVSBRANCHES" ->2.2. Branches</A -></H2 -><P -> Within the CVS repository, there are modules and branches. As - mentioned, the sources are in the <TT -CLASS="LITERAL" ->current</TT -> - <SPAN -CLASS="QUOTE" ->"module"</SPAN ->. Other modules are present for platform specific - issues. There is a webview of the CVS hierarchy at <A -HREF="http://ijbswa.cvs.sourceforge.net/ijbswa/" -TARGET="_top" ->http://ijbswa.cvs.sourceforge.net/ijbswa/</A ->, - which might help with visualizing how these pieces fit together. - </P -><P -> Branches are used to fork a sub-development path from the main trunk. - Within the <TT -CLASS="LITERAL" ->current</TT -> module where the sources are, there - is always at least one <SPAN -CLASS="QUOTE" ->"branch"</SPAN -> from the main trunk - devoted to a stable release series. The main trunk is where active - development takes place for the next stable series (e.g. 3.2.x). - So just prior to each stable series (e.g. 3.0.x), a branch is created - just for stable series releases (e.g. 3.0.0 -> 3.0.1 -> 3.0.2, etc). - Once the initial stable release of any stable branch has taken place, - this branch is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->only used for bugfixes</I -></SPAN ->, which have - had prior testing before being committed to CVS. (See <A -HREF="newrelease.html#VERSIONNUMBERS" ->Version Numbers</A -> below for details on - versioning.) - </P -><P -> At one time there were two distinct branches: stable and unstable. The - more drastic changes were to be in the unstable branch. These branches - have now been merged to minimize time and effort of maintaining two - branches. - </P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CVSCOMMIT" ->2.3. CVS Commit Guidelines</A -></H2 -><P -> The source tree is the heart of every software project. Every effort must - be made to ensure that it is readable, compilable and consistent at all - times. There are differing guidelines for the stable branch and the - main development trunk, and we ask anyone with CVS access to strictly - adhere to the following guidelines: - </P -><P -> Basic Guidelines, for all branches: - </P -><P -> <P -></P -><UL -><LI -><P -> Please don't commit even - a small change without testing it thoroughly first. When we're - close to a public release, ask a fellow developer to review your - changes. - </P -></LI -><LI -><P -> Your commit message should give a concise overview of <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->what you - changed</I -></SPAN -> (no big details) and <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->why you changed it</I -></SPAN -> - Just check previous messages for good examples. - </P -></LI -><LI -><P -> Don't use the same message on multiple files, unless it equally applies to - all those files. - </P -></LI -><LI -><P -> If your changes span multiple files, and the code won't recompile unless - all changes are committed (e.g. when changing the signature of a function), - then commit all files one after another, without long delays in between. - If necessary, prepare the commit messages in advance. - </P -></LI -><LI -><P -> Before changing things on CVS, make sure that your changes are in line - with the team's general consensus on what should be done. - </P -></LI -><LI -><P -> Note that near a major public release, we get more cautious. - There is always the possibility to submit a patch to the <A -HREF="http://sourceforge.net/tracker/?atid=311118&group_id=11118&func=bro…" -TARGET="_top" ->patch - tracker</A -> instead. - </P -></LI -></UL -> - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="introduction.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="documentation.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Introduction</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Documentation Guidelines</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/documentation.html b/external/privoxy/doc/webserver/developer-manual/documentation.html deleted file mode 100644 index d547c23..0000000 --- a/external/privoxy/doc/webserver/developer-manual/documentation.html +++ /dev/null @@ -1,944 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Documentation Guidelines</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="The CVS Repository" -HREF="cvs.html"><LINK -REL="NEXT" -TITLE="Coding Guidelines" -HREF="coding.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="cvs.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="coding.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="DOCUMENTATION" ->3. Documentation Guidelines</A -></H1 -><P -> All formal documents are maintained in Docbook SGML and located in the - <SAMP -CLASS="COMPUTEROUTPUT" ->doc/source/*</SAMP -> directory. You will need - <A -HREF="http://www.docbook.org" -TARGET="_top" ->Docbook</A ->, the Docbook - DTD's and the Docbook modular stylesheets (or comparable alternatives), - and either <SPAN -CLASS="APPLICATION" ->jade</SPAN -> or - <SPAN -CLASS="APPLICATION" ->openjade</SPAN -> (recommended) installed in order to - build docs from source. Currently there is <A -HREF="../user-manual/index.html" -TARGET="_top" -><I -CLASS="CITETITLE" ->user-manual</I -></A ->, - <A -HREF="../faq/index.html" -TARGET="_top" -><I -CLASS="CITETITLE" ->FAQ</I -></A ->, and, of - course this, the <I -CLASS="CITETITLE" ->developer-manual</I -> in this format. - The <I -CLASS="CITETITLE" ->README</I ->, <I -CLASS="CITETITLE" ->AUTHORS</I ->, - <I -CLASS="CITETITLE" ->INSTALL</I ->, - <I -CLASS="CITETITLE" ->privoxy.1</I -> (man page), and - <I -CLASS="CITETITLE" ->config</I -> files are also now maintained as Docbook - SGML. These files, when built, in the top-level source directory are - generated files! Also, the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> <TT -CLASS="FILENAME" ->index.html</TT -> (and a - variation on this file, <TT -CLASS="FILENAME" ->privoxy-index.html</TT ->, - meant for inclusion with doc packages), are maintained as SGML as well. - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->DO NOT edit these directly</I -></SPAN ->. Edit the SGML source, or - contact someone involved in the documentation. - </P -><P -> <TT -CLASS="FILENAME" ->config</TT -> requires some special handling. The reason it - is maintained this way is so that the extensive comments in the file - mirror those in <I -CLASS="CITETITLE" ->user-manual</I ->. But the conversion - process requires going from SGML to HTML to text to special formatting - required for the embedded comments. Some of this does not survive so - well. Especially some of the examples that are longer than 80 characters. - The build process for this file outputs to <TT -CLASS="FILENAME" ->config.new</TT ->, - which should be reviewed for errors and mis-formatting. Once satisfied - that it is correct, then it should be hand copied to - <TT -CLASS="FILENAME" ->config</TT ->. - </P -><P -> Other, less formal documents (e.g. <TT -CLASS="FILENAME" ->LICENSE</TT ->) are - maintained as plain text files in the top-level source directory. - </P -><P -> Packagers are encouraged to include this documentation. For those without - the ability to build the docs locally, text versions of each are kept in - CVS. HTML versions are also being kept in CVS under - <TT -CLASS="FILENAME" ->doc/webserver/*</TT ->. And PDF version are kept in - <TT -CLASS="FILENAME" ->doc/pdf/*</TT ->. - </P -><P -> Formal documents are built with the Makefile targets of - <SAMP -CLASS="COMPUTEROUTPUT" ->make dok</SAMP ->, or alternately - <SAMP -CLASS="COMPUTEROUTPUT" ->make redhat-dok</SAMP ->. If you have problems, - try both. The build process uses the document SGML sources in - <SAMP -CLASS="COMPUTEROUTPUT" ->doc/source/*/*</SAMP -> to update all text files in - <SAMP -CLASS="COMPUTEROUTPUT" ->doc/text/</SAMP -> and to update all HTML - documents in <SAMP -CLASS="COMPUTEROUTPUT" ->doc/webserver/</SAMP ->. - </P -><P -> Documentation writers should please make sure documents build - successfully before committing to CVS, if possible. - </P -><P -> How do you update the webserver (i.e. the pages on privoxy.org)? - - <P -></P -><OL -TYPE="1" -><LI -><P -> First, build the docs by running <SAMP -CLASS="COMPUTEROUTPUT" ->make - dok</SAMP -> (or alternately <SAMP -CLASS="COMPUTEROUTPUT" ->make - redhat-dok</SAMP ->). For PDF docs, do <SAMP -CLASS="COMPUTEROUTPUT" ->make - dok-pdf</SAMP ->. - </P -></LI -><LI -><P -> Run <SAMP -CLASS="COMPUTEROUTPUT" ->make webserver</SAMP -> which copies all - files from <SAMP -CLASS="COMPUTEROUTPUT" ->doc/webserver</SAMP -> to the - sourceforge webserver via scp. - </P -></LI -></OL -> - </P -><P -> Finished docs should be occasionally submitted to CVS - (<TT -CLASS="FILENAME" ->doc/webserver/*/*.html</TT ->) so that those without - the ability to build them locally, have access to them if needed. - This is especially important just prior to a new release! Please - do this <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->after</I -></SPAN -> the <TT -CLASS="LITERAL" ->$VERSION</TT -> and - other release specific data in <TT -CLASS="FILENAME" ->configure.in</TT -> has been - updated (this is done just prior to a new release). - </P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="SGML" ->3.1. Quickstart to Docbook and SGML</A -></H2 -><P -> If you are not familiar with SGML, it is a markup language similar to HTML. - Actually, not a mark up language per se, but a language used to define - markup languages. In fact, HTML is an SGML application. Both will use - <SPAN -CLASS="QUOTE" ->"tags"</SPAN -> to format text and other content. SGML tags can be much - more varied, and flexible, but do much of the same kinds of things. The tags, - or <SPAN -CLASS="QUOTE" ->"elements"</SPAN ->, are definable in SGML. There is no set - <SPAN -CLASS="QUOTE" ->"standards"</SPAN ->. Since we are using - <SPAN -CLASS="APPLICATION" ->Docbook</SPAN ->, our tags are those that are defined by - <SPAN -CLASS="APPLICATION" ->Docbook</SPAN ->. Much of how the finish document is - rendered is determined by the <SPAN -CLASS="QUOTE" ->"stylesheets"</SPAN ->. - The stylesheets determine how each tag gets translated to HTML, or other - formats.</P -><P -> Tags in Docbook SGML need to be always <SPAN -CLASS="QUOTE" ->"closed"</SPAN ->. If not, you - will likely generate errors. Example: <TT -CLASS="LITERAL" -><title>My - Title</title></TT ->. They are also case-insensitive, but we - strongly suggest using all lower case. This keeps compatibility with - [Docbook] <SPAN -CLASS="APPLICATION" ->XML</SPAN ->.</P -><P -> Our documents use <SPAN -CLASS="QUOTE" ->"sections"</SPAN -> for the most part. Sections - will be processed into HTML headers (e.g. <TT -CLASS="LITERAL" ->h1</TT -> for - <TT -CLASS="LITERAL" ->sect1</TT ->). The <SPAN -CLASS="APPLICATION" ->Docbook</SPAN -> stylesheets - will use these to also generate the Table of Contents for each doc. Our - TOC's are set to a depth of three. Meaning <TT -CLASS="LITERAL" ->sect1</TT ->, - <TT -CLASS="LITERAL" ->sect2</TT ->, and <TT -CLASS="LITERAL" ->sect3</TT -> will have TOC - entries, but <TT -CLASS="LITERAL" ->sect4</TT -> will not. Each section requires - a <TT -CLASS="LITERAL" -><title></TT -> element, and at least one - <TT -CLASS="LITERAL" -><para></TT ->. There is a limit of five section - levels in Docbook, but generally three should be sufficient for our - purposes.</P -><P -> Some common elements that you likely will use: </P -><P -> <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><para></para></I -></SPAN ->, paragraph delimiter. Most - text needs to be within paragraph elements (there are some exceptions). - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><emphasis></emphasis></I -></SPAN ->, the stylesheets - make this italics. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><filename></filename></I -></SPAN ->, files and directories. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><command></command></I -></SPAN ->, command examples. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><literallayout></literallayout></I -></SPAN ->, like - <TT -CLASS="LITERAL" -><pre></TT ->, more or less. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><itemizedlist></itemizedlist></I -></SPAN ->, list with bullets. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><listitem></listitem></I -></SPAN ->, member of the above. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><screen></screen></I -></SPAN ->, screen output, implies - <TT -CLASS="LITERAL" -><literallayout></TT ->. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><ulink url="example.com"></ulink></I -></SPAN ->, like - HTML <TT -CLASS="LITERAL" -><a></TT -> tag. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><quote></quote></I -></SPAN ->, for, doh, quoting text. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -> Look at any of the existing docs for examples of all these and more.</P -><P -> You might also find <SPAN -CLASS="QUOTE" ->"<A -HREF="http://opensource.bureau-cornavin.com/crash-course/index.html" -TARGET="_top" ->Writing Documentation - Using DocBook - A Crash Course</A ->"</SPAN -> useful.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="DOCSTYLE" ->3.2. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Documentation Style</A -></H2 -><P -> It will be easier if everyone follows a similar writing style. This - just makes it easier to read what someone else has written if it - is all done in a similar fashion. - </P -><P -> Here it is: - </P -><P -> <P -></P -><UL -><LI -><P -> All tags should be lower case. - </P -></LI -><LI -><P -> Tags delimiting a <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->block</I -></SPAN -> of text (even small - blocks) should be on their own line. Like: - <P -CLASS="LITERALLAYOUT" -> <para><br> -  Some text goes here.<br> - </para><br> -       </P -> - Tags marking individual words, or few words, should be in-line: - <P -CLASS="LITERALLAYOUT" ->  Just to <emphasis>emphasize</emphasis>, some text goes here.<br> -       </P -> - </P -></LI -><LI -><P -> Tags should be nested and step indented for block text like: (except - in-line tags) - <P -CLASS="LITERALLAYOUT" -> <para><br> -  <itemizedlist><br> -   <para><br> -    <listitem><br> -      Some text goes here in our list example.<br> -     </listitem><br> -   </para><br> -  </itemizedlist><br> - </para><br> -       </P -> - This makes it easier to find the text amongst the tags ;-) - </P -></LI -><LI -><P -> Use white space to separate logical divisions within a document, - like between sections. Running everything together consistently - makes it harder to read and work on. - </P -></LI -><LI -><P -> Do not hesitate to make comments. Comments can either use the - <comment> element, or the  style comment - familiar from HTML. (Note in Docbook v4.x <comment> is - replaced by <remark>.) - </P -></LI -><LI -><P -> We have an international audience. Refrain from slang, or English - idiosyncrasies (too many to list :). Humor also does not translate - well sometimes. - </P -></LI -><LI -><P -> Try to keep overall line lengths in source files to 80 characters or less - for obvious reasons. This is not always possible, with lengthy URLs for - instance. - </P -></LI -><LI -><P -> Our documents are available in differing formats. Right now, they - are just plain text, HTML, and PDF, but others are always a - future possibility. Be careful with URLs (<ulink>), and avoid - this mistake: - </P -><P -> My favorite site is <ulink url="http://example.com">here</ulink>. - </P -><P -> This will render as <SPAN -CLASS="QUOTE" ->"My favorite site is here"</SPAN ->, which is - not real helpful in a text doc. Better like this: - </P -><P -> My favorite site is <ulink url="http://example.com">example.com</ulink>. - </P -></LI -><LI -><P -> All documents should be spell checked occasionally. - <SPAN -CLASS="APPLICATION" ->aspell</SPAN -> can check SGML with the - <TT -CLASS="LITERAL" ->-H</TT -> option. (<SPAN -CLASS="APPLICATION" ->ispell</SPAN -> I think - too.) - </P -></LI -></UL -> - </P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN217" ->3.3. Privoxy Custom Entities</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> documentation is using - a number of customized <SPAN -CLASS="QUOTE" ->"entities"</SPAN -> to facilitate - documentation maintenance. - </P -><P -> We are using a set of <SPAN -CLASS="QUOTE" ->"boilerplate"</SPAN -> files with generic text, - that is used by multiple docs. This way we can write something once, and use - it repeatedly without having to re-write the same content over and over again. - If editing such a file, keep in mind that it should be - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->generic</I -></SPAN ->. That is the purpose; so it can be used in varying - contexts without additional modifications. - </P -><P -> We are also using what <SPAN -CLASS="APPLICATION" ->Docbook</SPAN -> calls - <SPAN -CLASS="QUOTE" ->"internal entities"</SPAN ->. These are like variables in - programming. Well, sort of. For instance, we have the - <TT -CLASS="LITERAL" ->p-version</TT -> entity that contains the current - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version string. You are strongly - encouraged to use these where possible. Some of these obviously - require re-setting with each release (done by the Makefile). A sampling of - custom entities are listed below. See any of the main docs for examples. - </P -><P -> <P -></P -><UL -><LI -><P -> Re- <SPAN -CLASS="QUOTE" ->"boilerplate"</SPAN -> text entities are defined like: - </P -><P -> <TT -CLASS="LITERAL" -><!entity supported SYSTEM "supported.sgml"></TT -> - </P -><P -> In this example, the contents of the file, - <TT -CLASS="FILENAME" ->supported.sgml</TT -> is available for inclusion anywhere - in the doc. To make this happen, just reference the now defined - entity: <TT -CLASS="LITERAL" ->&supported;</TT -> (starts with an ampersand - and ends with a semi-colon), and the contents will be dumped into - the finished doc at that point. - </P -></LI -><LI -><P -> Commonly used <SPAN -CLASS="QUOTE" ->"internal entities"</SPAN ->: - </P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->p-version</I -></SPAN ->: the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - version string, e.g. <SPAN -CLASS="QUOTE" ->"3.0.12"</SPAN ->. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->p-status</I -></SPAN ->: the project status, either - <SPAN -CLASS="QUOTE" ->"alpha"</SPAN ->, <SPAN -CLASS="QUOTE" ->"beta"</SPAN ->, or <SPAN -CLASS="QUOTE" ->"stable"</SPAN ->. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->p-not-stable</I -></SPAN ->: use to conditionally include - text in <SPAN -CLASS="QUOTE" ->"not stable"</SPAN -> releases (e.g. <SPAN -CLASS="QUOTE" ->"beta"</SPAN ->). - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->p-stable</I -></SPAN ->: just the opposite. - </TD -></TR -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->p-text</I -></SPAN ->: this doc is only generated as text. - </TD -></TR -></TBODY -></TABLE -><P -></P -></LI -></UL -> - </P -><P -> There are others in various places that are defined for a specific - purpose. Read the source! - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="cvs.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="coding.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->The CVS Repository</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Coding Guidelines</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/index.html b/external/privoxy/doc/webserver/developer-manual/index.html deleted file mode 100644 index 4360e6b..0000000 --- a/external/privoxy/doc/webserver/developer-manual/index.html +++ /dev/null @@ -1,688 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy Developer Manual</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="NEXT" -TITLE="Introduction" -HREF="introduction.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="ARTICLE" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="ARTICLE" -><DIV -CLASS="TITLEPAGE" -><H1 -CLASS="TITLE" -><A -NAME="AEN2" ->Privoxy Developer Manual</A -></H1 -><P -CLASS="PUBDATE" -> <SUB -> - - <A -HREF="copyright.html" ->Copyright</A -> © 2001-2009 by - <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->Privoxy Developers</A -> - </SUB -> - <BR></P -><P -CLASS="PUBDATE" ->$Id: index.html,v 1.42 2009/03/21 12:59:32 fabiankeil Exp $<BR></P -><DIV -><DIV -CLASS="ABSTRACT" -><P -></P -><A -NAME="AEN9" -></A -><P -> The developer manual provides guidance on coding, testing, packaging, documentation - and other issues of importance to those involved with - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> development. It is mandatory (and helpful!) reading - for anyone who wants to join the team. Note that it's currently out of date - and may not be entirely correct. As always, patches are welcome.</P -><P -> Please note that this document is constantly evolving. This copy represents - the state at the release of version 3.0.12. - You can find the latest version of the this manual at <A -HREF="http://www.privoxy.org/developer-manual/" -TARGET="_top" ->http://www.privoxy.org/developer-manual/</A ->. - Please see <A -HREF="contact.html" ->the Contact section</A -> - on how to contact the developers.</P -><P -></P -></DIV -></DIV -><HR></DIV -><DIV -CLASS="TOC" -><DL -><DT -><B ->Table of Contents</B -></DT -><DT ->1. <A -HREF="introduction.html" ->Introduction</A -></DT -><DD -><DL -><DT ->1.1. <A -HREF="introduction.html#QUICKSTART" ->Quickstart to Privoxy Development</A -></DT -></DL -></DD -><DT ->2. <A -HREF="cvs.html" ->The CVS Repository</A -></DT -><DD -><DL -><DT ->2.1. <A -HREF="cvs.html#CVSACCESS" ->Access to CVS</A -></DT -><DT ->2.2. <A -HREF="cvs.html#CVSBRANCHES" ->Branches</A -></DT -><DT ->2.3. <A -HREF="cvs.html#CVSCOMMIT" ->CVS Commit Guidelines</A -></DT -></DL -></DD -><DT ->3. <A -HREF="documentation.html" ->Documentation Guidelines</A -></DT -><DD -><DL -><DT ->3.1. <A -HREF="documentation.html#SGML" ->Quickstart to Docbook and SGML</A -></DT -><DT ->3.2. <A -HREF="documentation.html#DOCSTYLE" -><SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Documentation Style</A -></DT -><DT ->3.3. <A -HREF="documentation.html#AEN217" ->Privoxy Custom Entities</A -></DT -></DL -></DD -><DT ->4. <A -HREF="coding.html" ->Coding Guidelines</A -></DT -><DD -><DL -><DT ->4.1. <A -HREF="coding.html#S1" ->Introduction</A -></DT -><DT ->4.2. <A -HREF="coding.html#S2" ->Using Comments</A -></DT -><DD -><DL -><DT ->4.2.1. <A -HREF="coding.html#S3" ->Comment, Comment, Comment</A -></DT -><DT ->4.2.2. <A -HREF="coding.html#S4" ->Use blocks for comments</A -></DT -><DT ->4.2.3. <A -HREF="coding.html#S5" ->Keep Comments on their own line</A -></DT -><DT ->4.2.4. <A -HREF="coding.html#S6" ->Comment each logical step</A -></DT -><DT ->4.2.5. <A -HREF="coding.html#S7" ->Comment All Functions Thoroughly</A -></DT -><DT ->4.2.6. <A -HREF="coding.html#S8" ->Comment at the end of braces if the - content is more than one screen length</A -></DT -></DL -></DD -><DT ->4.3. <A -HREF="coding.html#S9" ->Naming Conventions</A -></DT -><DD -><DL -><DT ->4.3.1. <A -HREF="coding.html#S10" ->Variable Names</A -></DT -><DT ->4.3.2. <A -HREF="coding.html#S11" ->Function Names</A -></DT -><DT ->4.3.3. <A -HREF="coding.html#S12" ->Header file prototypes</A -></DT -><DT ->4.3.4. <A -HREF="coding.html#S13" ->Enumerations, and #defines</A -></DT -><DT ->4.3.5. <A -HREF="coding.html#S14" ->Constants</A -></DT -></DL -></DD -><DT ->4.4. <A -HREF="coding.html#S15" ->Using Space</A -></DT -><DD -><DL -><DT ->4.4.1. <A -HREF="coding.html#S16" ->Put braces on a line by themselves.</A -></DT -><DT ->4.4.2. <A -HREF="coding.html#S17" ->ALL control statements should have a - block</A -></DT -><DT ->4.4.3. <A -HREF="coding.html#S18" ->Do not belabor/blow-up boolean - expressions</A -></DT -><DT ->4.4.4. <A -HREF="coding.html#S19" ->Use white space freely because it is - free</A -></DT -><DT ->4.4.5. <A -HREF="coding.html#S20" ->Don't use white space around structure - operators</A -></DT -><DT ->4.4.6. <A -HREF="coding.html#S21" ->Make the last brace of a function stand - out</A -></DT -><DT ->4.4.7. <A -HREF="coding.html#S22" ->Use 3 character indentions</A -></DT -></DL -></DD -><DT ->4.5. <A -HREF="coding.html#S23" ->Initializing</A -></DT -><DD -><DL -><DT ->4.5.1. <A -HREF="coding.html#S24" ->Initialize all variables</A -></DT -></DL -></DD -><DT ->4.6. <A -HREF="coding.html#S25" ->Functions</A -></DT -><DD -><DL -><DT ->4.6.1. <A -HREF="coding.html#S26" ->Name functions that return a boolean as a - question.</A -></DT -><DT ->4.6.2. <A -HREF="coding.html#S27" ->Always specify a return type for a - function.</A -></DT -><DT ->4.6.3. <A -HREF="coding.html#S28" ->Minimize function calls when iterating by - using variables</A -></DT -><DT ->4.6.4. <A -HREF="coding.html#S29" ->Pass and Return by Const Reference</A -></DT -><DT ->4.6.5. <A -HREF="coding.html#S30" ->Pass and Return by Value</A -></DT -><DT ->4.6.6. <A -HREF="coding.html#S31" ->Names of include files</A -></DT -><DT ->4.6.7. <A -HREF="coding.html#S32" ->Provide multiple inclusion - protection</A -></DT -><DT ->4.6.8. <A -HREF="coding.html#S33" ->Use `extern "C"` when appropriate</A -></DT -><DT ->4.6.9. <A -HREF="coding.html#S34" ->Where Possible, Use Forward Struct - Declaration Instead of Includes</A -></DT -></DL -></DD -><DT ->4.7. <A -HREF="coding.html#S35" ->General Coding Practices</A -></DT -><DD -><DL -><DT ->4.7.1. <A -HREF="coding.html#S36" ->Turn on warnings</A -></DT -><DT ->4.7.2. <A -HREF="coding.html#S37" ->Provide a default case for all switch - statements</A -></DT -><DT ->4.7.3. <A -HREF="coding.html#S38" ->Try to avoid falling through cases in a - switch statement.</A -></DT -><DT ->4.7.4. <A -HREF="coding.html#S39" ->Use 'long' or 'short' Instead of - 'int'</A -></DT -><DT ->4.7.5. <A -HREF="coding.html#S40" ->Don't mix size_t and other types</A -></DT -><DT ->4.7.6. <A -HREF="coding.html#S41" ->Declare each variable and struct on its - own line.</A -></DT -><DT ->4.7.7. <A -HREF="coding.html#S42" ->Use malloc/zalloc sparingly</A -></DT -><DT ->4.7.8. <A -HREF="coding.html#S43" ->The Programmer Who Uses 'malloc' is - Responsible for Ensuring 'free'</A -></DT -><DT ->4.7.9. <A -HREF="coding.html#S44" ->Add loaders to the `file_list' structure - and in order</A -></DT -><DT ->4.7.10. <A -HREF="coding.html#S45" ->"Uncertain" new code and/or changes to - existing code, use FIXME or XXX</A -></DT -></DL -></DD -><DT ->4.8. <A -HREF="coding.html#S46" ->Addendum: Template for files and function - comment blocks:</A -></DT -></DL -></DD -><DT ->5. <A -HREF="testing.html" ->Testing Guidelines</A -></DT -><DD -><DL -><DT ->5.1. <A -HREF="testing.html#TESTING-PLAN" ->Testplan for releases</A -></DT -><DT ->5.2. <A -HREF="testing.html#TESTING-REPORT" ->Test reports</A -></DT -></DL -></DD -><DT ->6. <A -HREF="newrelease.html" ->Releasing a New Version</A -></DT -><DD -><DL -><DT ->6.1. <A -HREF="newrelease.html#VERSIONNUMBERS" ->Version numbers</A -></DT -><DT ->6.2. <A -HREF="newrelease.html#BEFORERELEASE" ->Before the Release: Freeze</A -></DT -><DT ->6.3. <A -HREF="newrelease.html#THERELEASE" ->Building and Releasing the Packages</A -></DT -><DD -><DL -><DT ->6.3.1. <A -HREF="newrelease.html#PACK-GUIDELINES" ->Note on Privoxy Packaging</A -></DT -><DT ->6.3.2. <A -HREF="newrelease.html#NEWRELEASE-TARBALL" ->Source Tarball</A -></DT -><DT ->6.3.3. <A -HREF="newrelease.html#NEWRELEASE-RPM" ->SuSE, Conectiva or Red Hat RPM</A -></DT -><DT ->6.3.4. <A -HREF="newrelease.html#NEWRELEASE-OS2" ->OS/2</A -></DT -><DT ->6.3.5. <A -HREF="newrelease.html#NEWRELEASE-SOLARIS" ->Solaris</A -></DT -><DT ->6.3.6. <A -HREF="newrelease.html#NEWRELEASE-WINDOWS" ->Windows</A -></DT -><DT ->6.3.7. <A -HREF="newrelease.html#NEWRELEASE-DEBIAN" ->Debian</A -></DT -><DT ->6.3.8. <A -HREF="newrelease.html#NEWRELEASE-MACOSX" ->Mac OS X</A -></DT -><DT ->6.3.9. <A -HREF="newrelease.html#NEWRELEASE-FREEBSD" ->FreeBSD</A -></DT -><DT ->6.3.10. <A -HREF="newrelease.html#NEWRELEASE-HPUX" ->HP-UX 11</A -></DT -><DT ->6.3.11. <A -HREF="newrelease.html#NEWRELEASE-AMIGA" ->Amiga OS</A -></DT -><DT ->6.3.12. <A -HREF="newrelease.html#NEWRELEASE-AIX" ->AIX</A -></DT -></DL -></DD -><DT ->6.4. <A -HREF="newrelease.html#RELEASING" ->Uploading and Releasing Your Package</A -></DT -><DT ->6.5. <A -HREF="newrelease.html#AFTERRELEASE" ->After the Release</A -></DT -></DL -></DD -><DT ->7. <A -HREF="webserver-update.html" ->Update the Webserver</A -></DT -><DT ->8. <A -HREF="contact.html" ->Contacting the developers, Bug Reporting and Feature Requests</A -></DT -><DD -><DL -><DT ->8.1. <A -HREF="contact.html#CONTACT-SUPPORT" ->Get Support</A -></DT -><DT ->8.2. <A -HREF="contact.html#REPORTING" ->Reporting Problems</A -></DT -><DD -><DL -><DT ->8.2.1. <A -HREF="contact.html#CONTACT-ADS" ->Reporting Ads or Other Configuration Problems</A -></DT -><DT ->8.2.2. <A -HREF="contact.html#CONTACT-BUGS" ->Reporting Bugs</A -></DT -></DL -></DD -><DT ->8.3. <A -HREF="contact.html#CONTACT-FEATURE" ->Request New Features</A -></DT -><DT ->8.4. <A -HREF="contact.html#CONTACT-OTHER" ->Other</A -></DT -></DL -></DD -><DT ->9. <A -HREF="copyright.html" ->Privoxy Copyright, License and History</A -></DT -><DD -><DL -><DT ->9.1. <A -HREF="copyright.html#AEN1223" ->License</A -></DT -><DT ->9.2. <A -HREF="copyright.html#AEN1239" ->History</A -></DT -></DL -></DD -><DT ->10. <A -HREF="seealso.html" ->See also</A -></DT -></DL -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -> </TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="introduction.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -> </TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Introduction</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/introduction.html b/external/privoxy/doc/webserver/developer-manual/introduction.html deleted file mode 100644 index 5ac1e59..0000000 --- a/external/privoxy/doc/webserver/developer-manual/introduction.html +++ /dev/null @@ -1,199 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Introduction</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="NEXT" -TITLE="The CVS Repository" -HREF="cvs.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="index.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="cvs.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="INTRODUCTION" ->1. Introduction</A -></H1 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, as an heir to - <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN ->, is a Free Software project - and the code is licensed under the GNU General Public License version 2. - As such, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> development is potentially open - to anyone who has the time, knowledge, and desire to contribute - in any capacity. Our goals are simply to continue the mission, - to improve <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, and - to make it available to as wide an audience as possible. - </P -><P -> One does not have to be a programmer to contribute. Packaging, testing, - documenting and porting, are all important jobs as well. - </P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="QUICKSTART" ->1.1. Quickstart to Privoxy Development</A -></H2 -><P -> The first step is to join the <A -HREF="mailto:ijbswa-developers@lists.sourceforge.net" -TARGET="_top" ->developer's mailing list</A ->. - You can submit your ideas, or even better patches. Patches are best - submitted to the Sourceforge tracker set up for this purpose, but - can be sent to the list for review too. - </P -><P -> You will also need to have a cvs package installed, which will - entail having ssh installed as well (which seems to be a requirement of - SourceForge), in order to access the cvs repository. Having the GNU build - tools is also going to be important (particularly, autoconf and gmake). - </P -><P -> For the time being (read, this section is under construction), you can - also refer to the extensive comments in the source code. In fact, - reading the code is recommended in any case. - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="cvs.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Privoxy Developer Manual</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->The CVS Repository</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/newrelease.html b/external/privoxy/doc/webserver/developer-manual/newrelease.html deleted file mode 100644 index 0cdb485..0000000 --- a/external/privoxy/doc/webserver/developer-manual/newrelease.html +++ /dev/null @@ -1,1956 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Releasing a New Version</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Testing Guidelines" -HREF="testing.html"><LINK -REL="NEXT" -TITLE="Update the Webserver" -HREF="webserver-update.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="testing.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="webserver-update.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="NEWRELEASE" ->6. Releasing a New Version</A -></H1 -><P -> When we release versions of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, - our work leaves our cozy secret lab and has to work in the cold - RealWorld[tm]. Once it is released, there is no way to call it - back, so it is very important that great care is taken to ensure - that everything runs fine, and not to introduce problems in the - very last minute. - </P -><P -> So when releasing a new version, please adhere exactly to the - procedure outlined in this chapter. - </P -><P -> The following programs are required to follow this process: - <TT -CLASS="FILENAME" ->ncftpput</TT -> (ncftp), <TT -CLASS="FILENAME" ->scp, ssh</TT -> (ssh), - <TT -CLASS="FILENAME" ->gmake</TT -> (GNU's version of make), autoconf, cvs. - </P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="VERSIONNUMBERS" ->6.1. Version numbers</A -></H2 -><P -> First you need to determine which version number the release will have. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version numbers consist of three numbers, - separated by dots, like in X.Y.Z (e.g. 3.0.0), where: - <P -></P -><UL -><LI -><P -> X, the version major, is rarely ever changed. It is increased by one if - turning a development branch into stable substantially changes the functionality, - user interface or configuration syntax. Majors 1 and 2 were - <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN ->, and 3 will be the first stable - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> release. - </P -></LI -><LI -><P -> Y, the version minor, represents the branch within the major version. - At any point in time, there are two branches being maintained: - The stable branch, with an even minor, say, 2N, in which no functionality is - being added and only bug-fixes are made, and 2N+1, the development branch, in - which the further development of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> takes - place. - This enables us to turn the code upside down and inside out, while at the same time - providing and maintaining a stable version. - The minor is reset to zero (and one) when the major is incremented. When a development - branch has matured to the point where it can be turned into stable, the old stable branch - 2N is given up (i.e. no longer maintained), the former development branch 2N+1 becomes the - new stable branch 2N+2, and a new development branch 2N+3 is opened. - </P -></LI -><LI -><P -> Z, the point or sub version, represents a release of the software within a branch. - It is therefore incremented immediately before each code freeze. - In development branches, only the even point versions correspond to actual releases, - while the odd ones denote the evolving state of the sources on CVS in between. - It follows that Z is odd on CVS in development branches most of the time. There, it gets - increased to an even number immediately before a code freeze, and is increased to an odd - number again immediately thereafter. - This ensures that builds from CVS snapshots are easily distinguished from released versions. - The point version is reset to zero when the minor changes. - </P -><P -> Stable branches work a little differently, since there should be - little to no development happening in such branches. Remember, - only bugfixes, which presumably should have had some testing - before being committed. Stable branches will then have their - version reported as <TT -CLASS="LITERAL" ->0.0.0</TT ->, during that period - between releases when changes are being added. This is to denote - that this code is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not for release</I -></SPAN ->. Then - as the release nears, the version is bumped according: e.g. - <TT -CLASS="LITERAL" ->3.0.1 -> 0.0.0 -> 3.0.2</TT ->. - </P -></LI -></UL -> - </P -><P -> In summary, the main CVS trunk is the development branch where new - features are being worked on for the next stable series. This should - almost always be where the most activity takes place. There is always at - least one stable branch from the trunk, e.g now it is - <TT -CLASS="LITERAL" ->3.0</TT ->, which is only used to release stable versions. - Once the initial *.0 release of the stable branch has been done, then as a - rule, only bugfixes that have had prior testing should be committed to - the stable branch. Once there are enough bugfixes to justify a new - release, the version of this branch is again incremented Example: 3.0.0 - -> 3.0.1 -> 3.0.2, etc are all stable releases from within the stable - branch. 3.1.x is currently the main trunk, and where work on 3.2.x is - taking place. If any questions, please post to the devel list - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->before</I -></SPAN -> committing to a stable branch! - </P -><P -> Developers should remember too that if they commit a bugfix to the stable - branch, this will more than likely require a separate submission to the - main trunk, since these are separate development trees within CVS. If you - are working on both, then this would require at least two separate check - outs (i.e main trunk, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and</I -></SPAN -> the stable release branch, - which is <TT -CLASS="LITERAL" ->v_3_0_branch</TT -> at the moment). - </P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="BEFORERELEASE" ->6.2. Before the Release: Freeze</A -></H2 -><P -> The following <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->must be done by one of the - developers</I -></SPAN -> prior to each new release. - </P -><P -> <P -></P -><UL -><LI -><P -> Make sure that everybody who has worked on the code in the last - couple of days has had a chance to yell <SPAN -CLASS="QUOTE" ->"no!"</SPAN -> in case - they have pending changes/fixes in their pipelines. Announce the - freeze so that nobody will interfere with last minute changes. - </P -></LI -><LI -><P -> Increment the version number (point from odd to even in development - branches!) in <TT -CLASS="FILENAME" ->configure.in</TT ->. (RPM spec files - will need to be incremented as well.) - </P -></LI -><LI -><P -> If <TT -CLASS="FILENAME" ->default.action</TT -> has changed since last - release (i.e. software release or standalone actions file release), - bump up its version info to A.B in this line: - </P -><P -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}</PRE -></TD -></TR -></TABLE -> - </P -><P -> - Then change the version info in doc/webserver/actions/index.php, - line: '$required_actions_file_version = "A.B";' - </P -></LI -><LI -><P -> All documentation should be rebuild after the version bump. - Finished docs should be then be committed to CVS (for those - without the ability to build these). Some docs may require - rather obscure processing tools. <TT -CLASS="FILENAME" ->config</TT ->, - the man page (and the html version of the man page), and the PDF docs - fall in this category. REAMDE, the man page, AUTHORS, and config - should all also be committed to CVS for other packagers. The - formal docs should be uploaded to the webserver. See the - Section "Updating the webserver" in this manual for details. - </P -></LI -><LI -><P -> The <I -CLASS="CITETITLE" ->User Manual</I -> is also used for context - sensitive help for the CGI editor. This is version sensitive, so that - the user will get appropriate help for his/her release. So with - each release a fresh version should be uploaded to the webserver - (this is in addition to the main <I -CLASS="CITETITLE" ->User Manual</I -> - link from the main page since we need to keep manuals for various - versions available). The CGI pages will link to something like - <TT -CLASS="LITERAL" ->http://privoxy.org/$(VERSION)/user-manual/</TT ->. This - will need to be updated for each new release. There is no Makefile - target for this at this time!!! It needs to be done manually. - </P -></LI -><LI -><P -> All developers should look at the <TT -CLASS="FILENAME" ->ChangeLog</TT -> and - make sure noteworthy changes are referenced. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Commit all files that were changed in the above steps!</I -></SPAN -> - </P -></LI -><LI -><P -> Tag all files in CVS with the version number with - <SPAN -CLASS="QUOTE" ->"<B -CLASS="COMMAND" ->cvs tag v_X_Y_Z</B ->"</SPAN ->. - Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc. - </P -></LI -><LI -><P -> If the release was in a development branch, increase the point version - from even to odd (X.Y.(Z+1)) again in <TT -CLASS="FILENAME" ->configure.in</TT -> and - commit your change. - </P -></LI -><LI -><P -> On the webserver, copy the user manual to a new top-level directory - called <TT -CLASS="FILENAME" ->X.Y.Z</TT ->. This ensures that help links from the CGI - pages, which have the version as a prefix, will go into the right version of the manual. - If this is a development branch release, also symlink <TT -CLASS="FILENAME" ->X.Y.(Z-1)</TT -> - to <TT -CLASS="FILENAME" ->X.Y.Z</TT -> and <TT -CLASS="FILENAME" ->X.Y.(Z+1)</TT -> to - <TT -CLASS="FILENAME" ->.</TT -> (i.e. dot). - </P -></LI -></UL -> - </P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="THERELEASE" ->6.3. Building and Releasing the Packages</A -></H2 -><P -> Now the individual packages can be built and released. Note that for - GPL reasons the first package to be released is always the source tarball. - </P -><P -> For <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> types of packages, including the source tarball, - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->you must make sure that you build from clean sources by exporting - the right version from CVS into an empty directory</I -></SPAN -> (just press return when - asked for a password): - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> mkdir dist # delete or choose different name if it already exists - cd dist - cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current</PRE -></TD -></TR -></TABLE -> - </P -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Do NOT change</I -></SPAN -> a single bit, including, but not limited to - version information after export from CVS. This is to make sure that - all release packages, and with them, all future bug reports, are based - on exactly the same code. - </P -><DIV -CLASS="WARNING" -><P -></P -><TABLE -CLASS="WARNING" -BORDER="1" -WIDTH="100%" -><TR -><TD -ALIGN="CENTER" -><B ->Warning</B -></TD -></TR -><TR -><TD -ALIGN="LEFT" -><P -> Every significant release of Privoxy has included at least one - package that either had incorrect versions of files, missing files, - or incidental leftovers from a previous build process that gave - unknown numbers of users headaches to try to figure out what was - wrong. PLEASE, make sure you are using pristene sources, and are - following the prescribed process! - </P -></TD -></TR -></TABLE -></DIV -><P -> Please find additional instructions for the source tarball and the - individual platform dependent binary packages below. And details - on the Sourceforge release process below that. - </P -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="PACK-GUIDELINES" ->6.3.1. Note on Privoxy Packaging</A -></H3 -><P -> Please keep these general guidelines in mind when putting together - your package. These apply to <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> platforms! - </P -><P -> <P -></P -><UL -><LI -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->requires</I -></SPAN -> - write access to: all <TT -CLASS="FILENAME" ->*.action</TT -> files, all - logfiles, and the <TT -CLASS="FILENAME" ->trust</TT -> file. You will - need to determine the best way to do this for your platform. - </P -></LI -><LI -><P -> Please include up to date documentation. At a bare minimum: - </P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <TT -CLASS="FILENAME" ->LICENSE</TT -> (top-level directory) - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <TT -CLASS="FILENAME" ->README</TT -> (top-level directory) - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <TT -CLASS="FILENAME" ->AUTHORS</TT -> (top-level directory) - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <TT -CLASS="FILENAME" ->man page</TT -> (top-level directory, Unix-like - platforms only) - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <TT -CLASS="FILENAME" ->The User Manual</TT -> (doc/webserver/user-manual/) - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <TT -CLASS="FILENAME" ->FAQ</TT -> (doc/webserver/faq/) - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -> Also suggested: <TT -CLASS="FILENAME" ->Developer Manual</TT -> - (doc/webserver/developer-manual) and <TT -CLASS="FILENAME" ->ChangeLog</TT -> - (top-level directory). <TT -CLASS="FILENAME" ->FAQ</TT -> and the manuals are - HTML docs. There are also text versions in - <TT -CLASS="FILENAME" ->doc/text/</TT -> which could conceivably also be - included. - </P -><P -> The documentation has been designed such that the manuals are linked - to each other from parallel directories, and should be packaged - that way. <TT -CLASS="FILENAME" ->privoxy-index.html</TT -> can also be - included and can serve as a focal point for docs and other links of - interest (and possibly renamed to <TT -CLASS="FILENAME" ->index.html</TT ->). - This should be one level up from the manuals. There is a link also - on this page to an HTMLized version of the man page. To avoid 404 for - this, it is in CVS as - <TT -CLASS="FILENAME" ->doc/webserver/man-page/privoxy-man-page.html</TT ->, - and should be included along with the manuals. There is also a - css stylesheets that can be included for better presentation: - <TT -CLASS="FILENAME" ->p_doc.css</TT ->. This should be in the same directory - with <TT -CLASS="FILENAME" ->privoxy-index.html</TT ->, (i.e. one level up from - the manual directories). - </P -></LI -><LI -><P -> <TT -CLASS="FILENAME" ->user.action</TT -> and <TT -CLASS="FILENAME" ->user.filter</TT -> - are designed for local preferences. Make sure these do not get overwritten! - <TT -CLASS="FILENAME" ->config</TT -> should not be overwritten either. This - has especially important configuration data in it. - <TT -CLASS="FILENAME" ->trust</TT -> should be left in tact as well. - </P -></LI -><LI -><P -> Other configuration files (<TT -CLASS="FILENAME" ->default.action</TT -> and - <TT -CLASS="FILENAME" ->default.filter</TT ->) should be installed as the new - defaults, but all previously installed configuration files should be - preserved as backups. This is just good manners :-) These files are - likely to change between releases and contain important new features - and bug fixes. - </P -></LI -><LI -><P -> Please check platform specific notes in this doc, if you haven't - done <SPAN -CLASS="QUOTE" ->"Privoxy"</SPAN -> packaging before for other platform - specific issues. Conversely, please add any notes that you know - are important for your platform (or contact one of the doc - maintainers to do this if you can't). - </P -></LI -><LI -><P -> Packagers should do a <SPAN -CLASS="QUOTE" ->"clean"</SPAN -> install of their - package after building it. So any previous installs should be - removed first to ensure the integrity of the newly built package. - Then run the package for a while to make sure there are no - obvious problems, before uploading. - </P -></LI -></UL -> - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-TARBALL" ->6.3.2. Source Tarball</A -></H3 -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd current - autoheader && autoconf && ./configure</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then do: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make tarball-dist</PRE -></TD -></TR -></TABLE -> - </P -><P -> To upload the package to Sourceforge, simply issue - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make tarball-upload</PRE -></TD -></TR -></TABLE -> - </P -><P -> Go to the displayed URL and release the file publicly on Sourceforge. - For the change log field, use the relevant section of the - <TT -CLASS="FILENAME" ->ChangeLog</TT -> file. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-RPM" ->6.3.3. SuSE, Conectiva or Red Hat RPM</A -></H3 -><P -> In following text, replace <TT -CLASS="REPLACEABLE" -><I ->dist</I -></TT -> - with either <SPAN -CLASS="QUOTE" ->"rh"</SPAN -> for Red Hat or <SPAN -CLASS="QUOTE" ->"suse"</SPAN -> for SuSE. - </P -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). - </P -><P -> As the only exception to not changing anything after export from CVS, - now examine the file <TT -CLASS="FILENAME" ->privoxy-</TT -><TT -CLASS="REPLACEABLE" -><I ->dist</I -></TT -><TT -CLASS="FILENAME" ->.spec</TT -> - and make sure that the version information and the RPM release number are - correct. The RPM release numbers for each version start at one. Hence it must - be reset to one if this is the first RPM for - <TT -CLASS="REPLACEABLE" -><I ->dist</I -></TT -> which is built from version - X.Y.Z. Check the - <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->file - list</A -> if unsure. Else, it must be set to the highest already available RPM - release number for that version plus one. - </P -><P -> Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd current - autoheader && autoconf && ./configure</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then do - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make <TT -CLASS="REPLACEABLE" -><I ->dist</I -></TT ->-dist</PRE -></TD -></TR -></TABLE -> - </P -><P -> To upload the package to Sourceforge, simply issue - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make <TT -CLASS="REPLACEABLE" -><I ->dist</I -></TT ->-upload <TT -CLASS="REPLACEABLE" -><I ->rpm_packagerev</I -></TT -></PRE -></TD -></TR -></TABLE -> - </P -><P -> where <TT -CLASS="REPLACEABLE" -><I ->rpm_packagerev</I -></TT -> is the - RPM release number as determined above. - Go to the displayed URL and release the file publicly on Sourceforge. - Use the release notes and change log from the source tarball package. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-OS2" ->6.3.4. OS/2</A -></H3 -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then get the OS/2 Setup module: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co os2setup</PRE -></TD -></TR -></TABLE -> - </P -><P -> You will need a mix of development tools. - The main compilation takes place with IBM Visual Age C++. - Some ancillary work takes place with GNU tools, available from - various sources like hobbes.nmsu.edu. - Specificially, you will need <TT -CLASS="FILENAME" ->autoheader</TT ->, - <TT -CLASS="FILENAME" ->autoconf</TT -> and <TT -CLASS="FILENAME" ->sh</TT -> tools. - The packaging takes place with WarpIN, available from various sources, including - its home page: <A -HREF="http://www.xworkplace.org/" -TARGET="_top" ->xworkplace</A ->. - </P -><P -> Change directory to the <TT -CLASS="FILENAME" ->os2setup</TT -> directory. - Edit the os2build.cmd file to set the final executable filename. - For example, - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> installExeName='privoxyos2_setup_X.Y.Z.exe'</PRE -></TD -></TR -></TABLE -> - </P -><P -> Next, edit the <TT -CLASS="FILENAME" ->IJB.wis</TT -> file so the release number matches - in the <TT -CLASS="FILENAME" ->PACKAGEID</TT -> section: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z"</PRE -></TD -></TR -></TABLE -> - </P -><P -> You're now ready to build. Run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> os2build</PRE -></TD -></TR -></TABLE -> - </P -><P -> You will find the WarpIN-installable executable in the - <TT -CLASS="FILENAME" ->./files</TT -> directory. Upload this anonymously to - <TT -CLASS="FILENAME" ->uploads.sourceforge.net/incoming</TT ->, create a release - for it, and you're done. Use the release notes and Change Log from the - source tarball package. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-SOLARIS" ->6.3.5. Solaris</A -></H3 -><P -> Login to Sourceforge's compilefarm via ssh: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> ssh cf.sourceforge.net</PRE -></TD -></TR -></TABLE -> - </P -><P -> Choose the right operating system (not the Debian one). - When logged in, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd current - autoheader && autoconf && ./configure</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then run - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> gmake solaris-dist</PRE -></TD -></TR -></TABLE -> - </P -><P -> which creates a gzip'ed tar archive. Sadly, you cannot use <B -CLASS="COMMAND" ->make - solaris-upload</B -> on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. Use the release notes and Change Log from the - source tarball package. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-WINDOWS" ->6.3.6. Windows</A -></H3 -><P -> You should ensure you have the latest version of Cygwin (from - <A -HREF="http://www.cygwin.com/" -TARGET="_top" ->http://www.cygwin.com/</A ->). - Run the following commands from within a Cygwin bash shell. - </P -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then get the Windows setup module: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co winsetup</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then you can build the package. This is fully automated, and is - controlled by <TT -CLASS="FILENAME" ->winsetup/GNUmakefile</TT ->. - All you need to do is: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd winsetup - make</PRE -></TD -></TR -></TABLE -> - </P -><P -> Now you can manually rename <TT -CLASS="FILENAME" ->privoxy_setup.exe</TT -> to - <TT -CLASS="FILENAME" ->privoxy_setup_X_Y_Z.exe</TT ->, and upload it to - SourceForge. When releasing the package on SourceForge, use the release notes - and Change Log from the source tarball package. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-DEBIAN" ->6.3.7. Debian</A -></H3 -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the - right version into an empty directory</I -></SPAN ->. (See - "Building and releasing packages" above). Then add a log - entry to <TT -CLASS="FILENAME" ->debian/changelog</TT ->, if it is not - already there, for example by running: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> debchange -v 3.0.12-stable-1 "New upstream version"</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then, run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> dpkg-buildpackage -rfakeroot -us -uc -b</PRE -></TD -></TR -></TABLE -> - </P -><P -> This will create - <TT -CLASS="FILENAME" ->../privoxy_3.0.12-stable-1_i386.deb</TT -> - which can be uploaded. To upload the package to Sourceforge, simply - issue - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make debian-upload</PRE -></TD -></TR -></TABLE -> - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-MACOSX" ->6.3.8. Mac OS X</A -></H3 -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then get the Mac OS X setup module: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co osxsetup</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd osxsetup - build</PRE -></TD -></TR -></TABLE -> - </P -><P -> This will run <TT -CLASS="FILENAME" ->autoheader</TT ->, <TT -CLASS="FILENAME" ->autoconf</TT -> and - <TT -CLASS="FILENAME" ->configure</TT -> as well as <TT -CLASS="FILENAME" ->make</TT ->. - Finally, it will copy over the necessary files to the ./osxsetup/files directory - for further processing by <TT -CLASS="FILENAME" ->PackageMaker</TT ->. - </P -><P -> Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package - name to match the release, and hit the "Create package" button. - If you specify ./Privoxy.pkg as the output package name, you can then create - the distributable zip file with the command: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg</PRE -></TD -></TR -></TABLE -> - </P -><P -> You can then upload <TT -CLASS="FILENAME" ->privoxyosx_setup_x.y.z.zip</TT -> anonymously to - <TT -CLASS="FILENAME" ->uploads.sourceforge.net/incoming</TT ->, - create a release for it, and you're done. Use the release notes - and Change Log from the source tarball package. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-FREEBSD" ->6.3.9. FreeBSD</A -></H3 -><P -> Login to Sourceforge's compile-farm via ssh: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> ssh cf.sourceforge.net</PRE -></TD -></TR -></TABLE -> - </P -><P -> Choose the right operating system. - When logged in, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd current - autoheader && autoconf && ./configure</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> gmake freebsd-dist</PRE -></TD -></TR -></TABLE -> - </P -><P -> which creates a gzip'ed tar archive. Sadly, you cannot use <B -CLASS="COMMAND" ->make - freebsd-upload</B -> on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. Use the release notes and Change Log from the - source tarball package. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-HPUX" ->6.3.10. HP-UX 11</A -></H3 -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd current - autoheader && autoconf && ./configure</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then do FIXME. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-AMIGA" ->6.3.11. Amiga OS</A -></H3 -><P -> First, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd current - autoheader && autoconf && ./configure</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then do FIXME. - </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="NEWRELEASE-AIX" ->6.3.12. AIX</A -></H3 -><P -> Login to Sourceforge's compilefarm via ssh: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> ssh cf.sourceforge.net</PRE -></TD -></TR -></TABLE -> - </P -><P -> Choose the right operating system. - When logged in, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->make sure that you have freshly exported the right - version into an empty directory</I -></SPAN ->. (See "Building and releasing - packages" above). Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> cd current - autoheader && autoconf && ./configure</PRE -></TD -></TR -></TABLE -> - </P -><P -> Then run: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make aix-dist</PRE -></TD -></TR -></TABLE -> - </P -><P -> which creates a gzip'ed tar archive. Sadly, you cannot use <B -CLASS="COMMAND" ->make - aix-upload</B -> on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. Use the release notes and Change Log from the - source tarball package. - </P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="RELEASING" ->6.4. Uploading and Releasing Your Package</A -></H2 -><P -> After the package is ready, it is time to upload it - to SourceForge, and go through the release steps. The upload - is done via FTP: - </P -><P -> <P -></P -><UL -><LI -><P -> Upload to: <A -HREF="ftp://upload.sourceforge.net/incoming" -TARGET="_top" ->ftp://upload.sourceforge.net/incoming</A -> - </P -></LI -><LI -><P -> user: <TT -CLASS="LITERAL" ->anonymous</TT -> - </P -></LI -><LI -><P -> password: <TT -CLASS="LITERAL" ->ijbswa-developers(a)lists.sourceforge.net</TT -> - </P -></LI -></UL -> - </P -><P -> Or use the <B -CLASS="COMMAND" ->make</B -> targets as described above. - </P -><P -> Once this done go to <A -HREF="https://sourceforge.net/project/admin/editpackages.php?group_id=11118" -TARGET="_top" ->https://sourceforge.net/project/admin/editpackages.php?group_id=11118</A ->, - making sure you are logged in. Find your target platform in the - second column, and click <TT -CLASS="LITERAL" ->Add Release</TT ->. You will - then need to create a new release for your package, using the format - of <TT -CLASS="LITERAL" ->$VERSION ($CODE_STATUS)</TT ->, e.g. <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->3.0.12 - (beta)</I -></SPAN ->. - </P -><P -> Now just follow the prompts. Be sure to add any appropriate Release - notes. You should see your freshly uploaded packages in - <SPAN -CLASS="QUOTE" ->"Step 2. Add Files To This Release"</SPAN ->. Check the - appropriate box(es). Remember at each step to hit the - <SPAN -CLASS="QUOTE" ->"Refresh/Submit"</SPAN -> buttons! You should now see your - file(s) listed in Step 3. Fill out the forms with the appropriate - information for your platform, being sure to hit <SPAN -CLASS="QUOTE" ->"Update"</SPAN -> - for each file. If anyone is monitoring your platform, check the - <SPAN -CLASS="QUOTE" ->"email"</SPAN -> box at the very bottom to notify them of - the new package. This should do it! - </P -><P -> If you have made errors, or need to make changes, you can go through - essentially the same steps, but select <TT -CLASS="LITERAL" ->Edit Release</TT ->, - instead of <TT -CLASS="LITERAL" ->Add Release</TT ->. - </P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AFTERRELEASE" ->6.5. After the Release</A -></H2 -><P -> When all (or: most of the) packages have been uploaded and made available, - send an email to the <A -HREF="mailto:ijbswa-announce@lists.sourceforge.net" -TARGET="_top" ->announce - mailing list</A ->, Subject: "Version X.Y.Z available for download". Be sure to - include the - <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->download - location</A ->, the release notes and the Changelog. Also, post an - updated News item on the project page Sourceforge, and update the Home - page and docs linked from the Home page (see below). Other news sites - and release oriented sites, such as Freshmeat, should also be notified. - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="testing.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="webserver-update.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Testing Guidelines</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Update the Webserver</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/quickstart.html b/external/privoxy/doc/webserver/developer-manual/quickstart.html deleted file mode 100644 index ba84f13..0000000 --- a/external/privoxy/doc/webserver/developer-manual/quickstart.html +++ /dev/null @@ -1,150 +0,0 @@ -<HTML -><HEAD -><TITLE ->Quickstart to Privoxy Development</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.64 -"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Introduction" -HREF="introduction.html"><LINK -REL="NEXT" -TITLE="The CVS Repository" -HREF="cvs.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="introduction.html" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="cvs.html" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="QUICKSTART" ->3. Quickstart to Privoxy Development</A -></H1 -><P -> You'll need an account on <A -HREF="http://sourceforge.net/" -TARGET="_top" ->Sourceforge</A -> to support our - development. Mail your ID to <A -HREF="mailto:developers@privoxy.org" -TARGET="_top" ->the list</A -> and wait until a - project manager has added you. - </P -><P -> For the time being (read, this section is under construction), please - refer to the extensive comments in the source code. - </P -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="introduction.html" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="cvs.html" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Introduction</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->The CVS Repository</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/seealso.html b/external/privoxy/doc/webserver/developer-manual/seealso.html deleted file mode 100644 index 35ee27c..0000000 --- a/external/privoxy/doc/webserver/developer-manual/seealso.html +++ /dev/null @@ -1,405 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->See also</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Privoxy Copyright, License and History" -HREF="copyright.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="copyright.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -> </TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="SEEALSO" ->10. See also</A -></H1 -><P -> Other references and sites of interest to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - users:</P -><P -> <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->http://www.privoxy.org/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Home page. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/faq/" -TARGET="_top" ->http://www.privoxy.org/faq/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> FAQ. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/developer-manual/" -TARGET="_top" ->http://www.privoxy.org/developer-manual/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developer manual. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://sourceforge.net/projects/ijbswa/" -TARGET="_top" ->https://sourceforge.net/projects/ijbswa/</A ->, - the Project Page for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on - <A -HREF="http://sourceforge.net" -TARGET="_top" ->SourceForge</A ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A ->, - the web-based user interface. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> must be - running for this to work. Shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A -> - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://sourceforge.net/tracker/?group_id=11118&atid=460288" -TARGET="_top" ->https://sourceforge.net/tracker/?group_id=11118&atid=460288</A ->, to submit <SPAN -CLASS="QUOTE" ->"misses"</SPAN -> and other - configuration related suggestions to the developers. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - - - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.junkbusters.com/ht/en/cookies.html" -TARGET="_top" ->http://www.junkbusters.com/ht/en/cookies.html</A ->, - an explanation how cookies are used to track web users. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.junkbusters.com/ijb.html" -TARGET="_top" ->http://www.junkbusters.com/ijb.html</A ->, - the original Internet Junkbuster. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.squid-cache.org/" -TARGET="_top" ->http://www.squid-cache.org/</A ->, a popular - caching proxy, which is often used together with <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.pps.jussieu.fr/~jch/software/polipo/" -TARGET="_top" ->http://www.pps.jussieu.fr/~jch/software/polipo/</A ->, - <SPAN -CLASS="APPLICATION" ->Polipo</SPAN -> is a caching proxy with advanced features - like pipelining, multiplexing and caching of partial instances. In many setups - it can be used as <SPAN -CLASS="APPLICATION" ->Squid</SPAN -> replacement. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://www.torproject.org/" -TARGET="_top" ->https://www.torproject.org/</A ->, - <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> can help anonymize web browsing, - web publishing, instant messaging, IRC, SSH, and other applications. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - </P -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="copyright.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -> </TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Privoxy Copyright, License and History</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -> </TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/testing.html b/external/privoxy/doc/webserver/developer-manual/testing.html deleted file mode 100644 index 80d3f29..0000000 --- a/external/privoxy/doc/webserver/developer-manual/testing.html +++ /dev/null @@ -1,259 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Testing Guidelines</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Coding Guidelines" -HREF="coding.html"><LINK -REL="NEXT" -TITLE="Releasing a New Version" -HREF="newrelease.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="coding.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="newrelease.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="TESTING" ->5. Testing Guidelines</A -></H1 -><P ->To be filled.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="TESTING-PLAN" ->5.1. Testplan for releases</A -></H2 -><P -> Explain release numbers. major, minor. developer releases. etc. - -<P -></P -><OL -TYPE="1" -><LI -><P ->Remove any existing rpm with rpm -e</P -></LI -><LI -><P ->Remove any file that was left over. This includes (but is not limited to) - <P -></P -><UL -><LI -><P ->/var/log/privoxy</P -></LI -><LI -><P ->/etc/privoxy</P -></LI -><LI -><P ->/usr/sbin/privoxy</P -></LI -><LI -><P ->/etc/init.d/privoxy</P -></LI -><LI -><P ->/usr/doc/privoxy*</P -></LI -></UL -></P -></LI -><LI -><P ->Install the rpm. Any error messages?</P -></LI -><LI -><P ->start,stop,status <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with the specific script - (e.g. /etc/rc.d/init/privoxy stop). Reboot your machine. Does - autostart work?</P -></LI -><LI -><P ->Start browsing. Does <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> work? Logfile written?</P -></LI -><LI -><P ->Remove the rpm. Any error messages? All files removed?</P -></LI -></OL -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="TESTING-REPORT" ->5.2. Test reports</A -></H2 -><P ->Please submit test reports only with the <A -HREF="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=395005" -TARGET="_top" ->test form</A -> -at sourceforge. Three simple steps: - <P -></P -><UL -><LI -><P ->Select category: the distribution you test on.</P -></LI -><LI -><P ->Select group: the version of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> that we are about to release.</P -></LI -><LI -><P ->Fill the Summary and Detailed Description with something - intelligent (keep it short and precise).</P -></LI -></UL -> - Do not mail to the mailing list (we cannot keep track on issues there). - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="coding.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="newrelease.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Coding Guidelines</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Releasing a New Version</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/developer-manual/webserver-update.html b/external/privoxy/doc/webserver/developer-manual/webserver-update.html deleted file mode 100644 index b54d646..0000000 --- a/external/privoxy/doc/webserver/developer-manual/webserver-update.html +++ /dev/null @@ -1,260 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Update the Webserver</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Developer Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Releasing a New Version" -HREF="newrelease.html"><LINK -REL="NEXT" -TITLE="Contacting the developers, Bug Reporting and Feature Requests" -HREF="contact.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Developer Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="newrelease.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="contact.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="WEBSERVER-UPDATE" ->7. Update the Webserver</A -></H1 -><P -> The webserver should be updated at least with each stable release. When - updating, please follow these steps to make sure that no broken links, - inconsistent contents or permission problems will occur (as it has many - times in the past!): - </P -><P -> If you have changed anything in the stable-branch documentation source - SGML files, do: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make dok dok-pdf # (or 'make redhat-dok dok-pdf' if 'make dok' doesn't work for you)</PRE -></TD -></TR -></TABLE -> - </P -><P -> That will generate <TT -CLASS="FILENAME" ->doc/webserver/user-manual</TT ->, - <TT -CLASS="FILENAME" ->doc/webserver/developer-manual</TT ->, - <TT -CLASS="FILENAME" ->doc/webserver/faq</TT ->, - <TT -CLASS="FILENAME" ->doc/pdf/*.pdf</TT -> and - <TT -CLASS="FILENAME" ->doc/webserver/index.html</TT -> automatically. - </P -><P -> If you changed the manual page sources, generate - <TT -CLASS="FILENAME" ->doc/webserver/man-page/privoxy-man-page.html</TT -> - by running <SPAN -CLASS="QUOTE" ->"<B -CLASS="COMMAND" ->make man</B ->"</SPAN ->. (This is - a separate target due to dependencies on some obscure perl scripts - [now in CVS, but not well tested]. See comments in <TT -CLASS="FILENAME" ->GNUmakefile</TT ->.) - </P -><P -> If you want to add new files to the webserver, create them locally in - the <TT -CLASS="FILENAME" ->doc/webserver/*</TT -> directory (or - create new directories under <TT -CLASS="FILENAME" ->doc/webserver</TT ->). - </P -><P -> Next, commit any changes from the above steps to CVS. All set? - If these are docs in the stable branch, then do: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> make webserver</PRE -></TD -></TR -></TABLE -> - </P -><P -> This will do the upload to <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->the - webserver</A -> (www.privoxy.org) and ensure all files and directories - there are group writable. - </P -><P -> Please do <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->NOT</I -></SPAN -> use any other means of transferring - files to the webserver to avoid permission problems. Also, please do not - upload docs from development branches or versions. The publicly posted - docs should be in sync with the last official release. - </P -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="newrelease.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="contact.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Releasing a New Version</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Contacting the developers, Bug Reporting and Feature Requests</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/configuration.html b/external/privoxy/doc/webserver/faq/configuration.html deleted file mode 100644 index 01c001b..0000000 --- a/external/privoxy/doc/webserver/faq/configuration.html +++ /dev/null @@ -1,1797 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Configuration</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Installation" -HREF="installation.html"><LINK -REL="NEXT" -TITLE="Miscellaneous" -HREF="misc.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Frequently Asked Questions</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="installation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="misc.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CONFIGURATION" ->3. Configuration</A -></H1 -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN354" ->3.1. What exactly is an <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> file?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> utilizes the concept of <SPAN -CLASS="QUOTE" ->" <A -HREF="../user-manual/actions-file.html#ACTIONS" -TARGET="_top" ->actions</A ->"</SPAN -> - that are used to manipulate and control web page data. - <A -HREF="../user-manual/actions-file.html" -TARGET="_top" ->Actions files</A -> - are where these <A -HREF="../user-manual/actions-file.html#ACTIONS" -TARGET="_top" ->actions</A -> - that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> could take while processing a certain - request, are configured. Typically, you would define a set of default actions - that apply globally to all URLs, then add exceptions to these defaults where needed. - There is a wide array of actions available that give the user a high degree - of control and flexibility on how to process each and every web page.</P -><P -> Actions can be defined on a <A -HREF="../user-manual/actions-file.html#AF-PATTERNS" -TARGET="_top" ->URL pattern</A -> basis, i.e. - for single URLs, whole web sites, groups or parts thereof etc. Actions can also be - grouped together and then applied to requests matching one or more patterns. - There are many possible actions that might apply to any given site. As an example, - if you are blocking <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookies</A -> - as one of your default actions, but need to accept cookies from a given site, - you would need to define an exception for this site in one of your actions - files, preferably in <TT -CLASS="FILENAME" ->user.action</TT ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="ACTIONSS" ->3.2. The <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> concept confuses me. Please list -some of these <SPAN -CLASS="QUOTE" ->"actions"</SPAN ->.</A -></H3 -><P -> For a comprehensive discussion of the actions concept, please refer - to the <A -HREF="../user-manual/actions-file.html" -TARGET="_top" ->actions file - chapter</A -> in the <A -HREF="../user-manual/index.html" -TARGET="_top" ->User - Manual</A ->. It includes a <A -HREF="../user-manual/actions-file.html#ACTIONS" -TARGET="_top" ->list of all actions</A -> - and an <A -HREF="../user-manual/actions-file.html#ACT-EXAMPLES" -TARGET="_top" ->actions - file tutorial</A -> to get you started.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN377" ->3.3. How are actions files configured? What is the easiest -way to do this?</A -></H3 -><P -> Actions files are just text files in a special syntax and can be edited - with a text editor. But probably the easiest way is to access - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s user interface with your web browser - at <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> - (Shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->) and then select - <SPAN -CLASS="QUOTE" ->"<A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->View & - change the current configuration</A ->"</SPAN -> from the menu. Note - that this feature must be explicitly enabled in the main config file - (see <A -HREF="../user-manual/config.html#ENABLE-EDIT-ACTIONS" -TARGET="_top" ->enable-edit-actions</A ->).</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN386" ->3.4. There are several different <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> files. What are -the differences?</A -></H3 -><P -> Three actions files - are being included by the developers, to be used for - different purposes: These are - <TT -CLASS="FILENAME" ->default.action</TT ->, the <SPAN -CLASS="QUOTE" ->"main"</SPAN -> actions file - which is actively maintained by the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - developers and typically sets the default policies, <TT -CLASS="FILENAME" ->user.action</TT ->, - where users are encouraged to make their private customizations. - Please see <A -HREF="../user-manual/actions-file.html" -TARGET="_top" ->the actions chapter</A -> - in the <A -HREF="../user-manual/index.html" -TARGET="_top" ->User Manual</A -> for a more - detailed explanation.</P -><P -> Earlier versions included three different versions of the - <TT -CLASS="FILENAME" ->default.action</TT -> file. The new scheme allows for - greater flexibility of local configuration, and for browser based - selection of pre-defined <SPAN -CLASS="QUOTE" ->"aggressiveness"</SPAN -> levels.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="GETUPDATES" ->3.5. Where can I get updated Actions Files?</A -></H3 -><P -> Based on your feedback and the continuing development, updates of - <TT -CLASS="FILENAME" ->default.action</TT -> will be - made available from time to time on the <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->files section</A -> of - our <A -HREF="http://sf.net/projects/ijbswa/" -TARGET="_top" ->project page</A ->. - </P -><P -> If you wish to receive an email notification whenever we release updates of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> or the actions file, <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/" -TARGET="_top" ->subscribe - to our announce mailing list</A ->, ijbswa-announce(a)lists.sourceforge.net. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NEWCONFIG" ->3.6. Can I use my old config files?</A -></H3 -><P -> The syntax and purpose of configuration files has remained roughly the - same throughout the 3.x series, but backwards compatibility is not guaranteed. - Also each release contains updated, <SPAN -CLASS="QUOTE" ->"improved"</SPAN -> versions and it is - therefore strongly recommended to install the newer configuration files - and merge back your modifications. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DIFFICULT" ->3.7. Why is the configuration so complicated?</A -></H3 -><P -> <SPAN -CLASS="QUOTE" ->"Complicated"</SPAN -> is in the eye of the beholder. Those that are - familiar with some of the underlying concepts, such as regular expression - syntax, take to it like a fish takes to water. Also, software that tries - hard to be <SPAN -CLASS="QUOTE" ->"user friendly"</SPAN ->, often lacks sophistication and - flexibility. There is always that trade-off there between power vs. - easy-of-use. Furthermore, anyone is welcome to contribute ideas and - implementations to enhance <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="YAHOO" ->3.8. How can I make my Yahoo/Hotmail/Gmail account work?</A -></H3 -><P -> The default configuration shouldn't impact the usability of any of these services. - It may, however, make all <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookies</A -> - temporary, so that your browser will forget your - login credentials in between browser sessions. If you would like not to have to log - in manually each time you access those websites, simply turn off all cookie handling - for them in the <TT -CLASS="FILENAME" ->user.action</TT -> file. An example for yahoo might - look like: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Allow all cookies for Yahoo login: -# -{ -<A -HREF="../user-manual/actions-file.html#CRUNCH-INCOMING-COOKIES" -TARGET="_top" ->crunch-incoming-cookies</A -> -<A -HREF="../user-manual/actions-file.html#CRUNCH-OUTGOING-COOKIES" -TARGET="_top" ->crunch-outgoing-cookies</A -> -<A -HREF="../user-manual/actions-file.html#SESSION-COOKIES-ONLY" -TARGET="_top" ->session-cookies-only</A -> } -.login.yahoo.com</PRE -></TD -></TR -></TABLE -> - </P -><P -> These kinds of sites are often quite complex and heavy with - <A -HREF="http://en.wikipedia.org/wiki/Javascript" -TARGET="_top" ->Javascript</A -> and - thus <SPAN -CLASS="QUOTE" ->"fragile"</SPAN ->. So if <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->still</I -></SPAN -> a problem, - we have an <A -HREF="../user-manual/actions-file.html#ALIASES" -TARGET="_top" ->alias</A -> just for such - sticky situations: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Gmail is a _fragile_ site: -# -{ <TT -CLASS="LITERAL" ->fragile</TT -> } - # Gmail is ... - mail.google.com</PRE -></TD -></TR -></TABLE -> - </P -><P -> Be sure to flush your browser's caches whenever making these kinds of - changes, just to make sure the changes <SPAN -CLASS="QUOTE" ->"take"</SPAN ->. - </P -><P -> Make sure the domain, host and path are appropriate as well. Your browser can - tell you where you are specifically and you should use that information for - your configuration settings. Note that above it is not referenced as - <TT -CLASS="LITERAL" ->gmail.com</TT ->, which is a valid domain name. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="CONFIGFILES" ->3.9. What's the difference between the -<SPAN -CLASS="QUOTE" ->"Cautious"</SPAN ->, <SPAN -CLASS="QUOTE" ->"Medium"</SPAN -> and <SPAN -CLASS="QUOTE" ->"Advanced"</SPAN -> defaults?</A -></H3 -><P -> Configuring <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is not entirely trivial. To - help you get started, we provide you with three different default action - <SPAN -CLASS="QUOTE" ->"profiles"</SPAN -> in the web based actions file editor at <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A ->. - See the <A -HREF="../user-manual/actions-file.html" -TARGET="_top" -><I -CLASS="CITETITLE" ->User - Manual</I -></A -> for a list of actions, and how the default - profiles are set. - </P -><P -> Where the defaults are likely to break some sites, exceptions for - known popular <SPAN -CLASS="QUOTE" ->"problem"</SPAN -> sites are included, but in - general, the more aggressive your default settings are, the more exceptions - you will have to make later. New users are best to start off in - <SPAN -CLASS="QUOTE" ->"Cautious"</SPAN -> setting. This is safest and will have the fewest - problems. See the <A -HREF="../user-manual/index.html" -TARGET="_top" -><I -CLASS="CITETITLE" ->User Manual</I -></A -> - for a more detailed discussion.</P -><P -> It should be noted that the <SPAN -CLASS="QUOTE" ->"Advanced"</SPAN -> profile (formerly known - as the <SPAN -CLASS="QUOTE" ->"Adventuresome"</SPAN -> profile) is more - aggressive, and will make use of some of - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> advanced features. Use at your own risk!</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="BROWSECONFIG" ->3.10. Why can I change the configuration -with a browser? Does that not raise security issues?</A -></H3 -><P -> It may seem strange that regular users can edit the config files with their - browsers, although the whole <TT -CLASS="FILENAME" ->/etc/privoxy</TT -> hierarchy - belongs to the user <SPAN -CLASS="QUOTE" ->"privoxy"</SPAN ->, with only 644 permissions. - </P -><P -> When you use the browser-based editor, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - itself is writing to the config files. Because - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is running as the user <SPAN -CLASS="QUOTE" ->"privoxy"</SPAN ->, - it can update its own config files. - </P -><P -> If you run <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> for multiple untrusted users (e.g. in - a LAN) or aren't entirely in control of your own browser, you will probably want - to make sure that the the web-based editor and remote toggle features are - <SPAN -CLASS="QUOTE" ->"off"</SPAN -> by setting <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" -><A -HREF="../user-manual/config.html#ENABLE-EDIT-ACTIONS" -TARGET="_top" ->enable-edit-actions</A -> - 0</TT ->"</SPAN -> and <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" -><A -HREF="../user-manual/config.html#ENABLE-REMOTE-TOGGLE" -TARGET="_top" ->enable-remote-toggle</A -> - 0</TT ->"</SPAN -> in the <A -HREF="../user-manual/config.html" -TARGET="_top" ->main configuration file</A ->. - </P -><P -> As of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.7 these options are disabled by default. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN481" ->3.11. What is the <TT -CLASS="FILENAME" ->default.filter</TT -> file? What is a <SPAN -CLASS="QUOTE" ->"filter"</SPAN ->?</A -></H3 -><P -> The <A -HREF="../user-manual/filter-file.html" -TARGET="_top" -><TT -CLASS="FILENAME" ->default.filter</TT -></A -> - file is where <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->filters</I -></SPAN -> as supplied by the developers are defined. - Filters are a special subset of actions that can be used to modify or - remove web page content or headers on the fly. Content filters can - be applied to <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->anything</I -></SPAN -> in the page source, - header filters can be applied to either server or client headers. - Regular expressions are used to accomplish this.</P -><P -> There are a number of pre-defined filters to deal with common annoyances. The - filters are only defined here, to invoke them, you need to use the - <A -HREF="../user-manual/actions-file.html#FILTER" -TARGET="_top" -><TT -CLASS="LITERAL" ->filter</TT -> - action</A -> in one of the actions files. Content filtering is automatically - disabled for inappropriate MIME types, but if you now better than Privoxy - what should or should not be filtered you can filter any content you like.</P -><P -> Filters should - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not</I -></SPAN -> be confused with <A -HREF="../user-manual/actions-file.html#BLOCK" -TARGET="_top" -><TT -CLASS="LITERAL" ->blocks</TT -></A ->, which - is a completely different action, and is more typically used to block ads and - unwanted sites.</P -><P -> If you are familiar with regular expressions, and HTML, you can look at - the provided <TT -CLASS="FILENAME" ->default.filter</TT -> with a text editor and define - your own filters. This is potentially a very powerful feature, but - requires some expertise in both regular expressions and HTML/HTTP. - You should - place any modifications to the default filters, or any new ones you create - in a separate file, such as <TT -CLASS="FILENAME" ->user.filter</TT ->, so they won't - be overwritten during upgrades. - The ability to define multiple filter files - in <TT -CLASS="FILENAME" ->config</TT -> is a new feature as of v. 3.0.5.</P -><P -> There is no GUI editor option for this part of the configuration, - but you can disable/enable the various pre-defined filters of the included - <TT -CLASS="FILENAME" ->default.filter</TT -> file with the <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->web-based actions file editor</A ->. - Note that the custom actions editor must be explicitly enabled in - the main config file (see <A -HREF="../user-manual/config.html#ENABLE-EDIT-ACTIONS" -TARGET="_top" ->enable-edit-actions</A ->).</P -><P -> If you intend to develop your own filters, you might want to have a look at - <A -HREF="http://www.fabiankeil.de/sourcecode/pft/" -TARGET="_top" ->Privoxy-Filter-Test</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="LANCONFIG" ->3.12. How can I set up Privoxy to act as a proxy for my - LAN?</A -></H3 -><P -> By default, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> only responds to requests - from <TT -CLASS="LITERAL" ->127.0.0.1</TT -> (localhost). To have it act as a server for - a network, this needs to be changed in the <A -HREF="../user-manual/config.html" -TARGET="_top" ->main configuration file</A ->. Look for - the <TT -CLASS="LITERAL" -><A -HREF="../user-manual/config.html#LISTEN-ADDRESS" -TARGET="_top" ->listen-address</A -></TT -> - option, which may be commented out with a <SPAN -CLASS="QUOTE" ->"#"</SPAN -> symbol. Make sure - it is uncommented, and assign it the address of the LAN gateway interface, - and port number to use. Assuming your LAN address is 192.168.1.1 and you - wish to run <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on port 8118, this line - should look like:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> listen-address 192.168.1.1:8118</PRE -></TD -></TR -></TABLE -></P -><P -> Save the file, and restart <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. Configure - all browsers on the network then to use this address and port number.</P -><P -> Alternately, you can have <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> listen on - all available interfaces:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> listen-address :8118</PRE -></TD -></TR -></TABLE -></P -><P -> And then use <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - <A -HREF="../user-manual/config.html#PERMIT-ACCESS" -TARGET="_top" ->permit-access</A -> - feature to limit connections. A firewall in this situation is recommended - as well.</P -><P -> The above steps should be the same for any TCP network, regardless of - operating system.</P -><P -> If you run <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on a LAN with untrusted users, - we recommend that you double-check the <A -HREF="../user-manual/config.html#ACCESS-CONTROL" -TARGET="_top" ->access control and security</A -> - options!</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN532" ->3.13. Instead of ads, now I get a checkerboard pattern. I don't want to see anything.</A -></H3 -><P -> The replacement for blocked images can be controlled with the <A -HREF="../user-manual/actions-file.html#SET-IMAGE-BLOCKER" -TARGET="_top" -><TT -CLASS="LITERAL" ->set-image-blocker</TT -> - action</A ->. You have the choice of a checkerboard pattern, a transparent 1x1 GIF - image (aka <SPAN -CLASS="QUOTE" ->"blank"</SPAN ->), or a redirect to a custom image of your choice. - Note that this choice only has effect for images which are blocked as images, i.e. - whose URLs match both a <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#HANDLE-AS-IMAGE" -TARGET="_top" ->handle-as-image</A -></TT -> - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and</I -></SPAN -> <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#BLOCK" -TARGET="_top" ->block</A -></TT -> action.</P -><P -> If you want to see nothing, then change the <A -HREF="../user-manual/actions-file.html#SET-IMAGE-BLOCKER" -TARGET="_top" -><TT -CLASS="LITERAL" ->set-image-blocker</TT -> - action</A -> to <SPAN -CLASS="QUOTE" ->"blank"</SPAN ->. This can be done by editing the - <TT -CLASS="FILENAME" ->user.action</TT -> file, or through the <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->web-based actions file editor</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN549" ->3.14. Why would anybody want to see a checkerboard pattern?</A -></H3 -><P -> Remember that <A -HREF="general.html#WHATSANAD" ->telling which image is an ad and which - isn't</A ->, is an educated guess. While we hope that the standard configuration - is rather smart, it will make occasional mistakes. The checkerboard image is visually - decent, and it shows you where images have been blocked, which can be very - helpful in case some navigation aid or otherwise innocent image was - erroneously blocked. It is recommended for new users so they can - <SPAN -CLASS="QUOTE" ->"see"</SPAN -> what is happening. Some people might also enjoy seeing how - many banners they <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->don't</I -></SPAN -> have to see.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN555" ->3.15. I see some images being replaced with text -instead of the checkerboard image. Why and how do I get rid of this?</A -></H3 -><P -> This happens when the banners are not embedded in the HTML code of the - page itself, but in separate HTML (sub)documents that are loaded into (i)frames - or (i)layers, and these external HTML documents are blocked. Being non-images - they get replaced by a substitute HTML page rather than a substitute image, - which wouldn't work out technically, since the browser expects and accepts - only HTML when it has requested an HTML document. </P -><P -> The substitute page adapts to the available space and shows itself as a - miniature two-liner if loaded into small frames, or full-blown with a - large red "BLOCKED" banner if space allows.</P -><P -> If you prefer the banners to be blocked by images, you must see to it that - the HTML documents in which they are embedded are not blocked. Clicking - the <SPAN -CLASS="QUOTE" ->"See why"</SPAN -> link offered in the substitute page will show - you which rule blocked the page. After changing the rule and un-blocking - the HTML documents, the browser will try to load the actual banner images - and the usual image blocking will (hopefully!) kick in.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="SRVANY" ->3.16. Can Privoxy run as a service -on Win2K/NT/XP?</A -></H3 -><P -> Yes. Version 3.0.5 introduces full <SPAN -CLASS="APPLICATION" ->Windows</SPAN -> service - functionality. See <A -HREF="../user-manual/installation.html#installation-pack-win" -TARGET="_top" -> the <I -CLASS="CITETITLE" ->User Manual</I -></A -> for details on how to install and configure - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> as a service.</P -><P -> Earlier 3.x versions could run as a system service using <B -CLASS="COMMAND" ->srvany.exe</B ->. - See the discussion at <A -HREF="http://sourceforge.net/tracker/?func=detail&atid=361118&aid=485617&…" -TARGET="_top" ->http://sourceforge.net/tracker/?func=detail&atid=361118&aid=485617&…</A ->, - for details, and a sample configuration.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="OTHERPROXY" ->3.17. How can I make Privoxy work with other -proxies like Squid or Tor?</A -></H3 -><P -> This can be done and is often useful to combine the benefits of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with those of a another proxy. - See the <A -HREF="../user-manual/config.html#FORWARDING" -TARGET="_top" ->forwarding chapter</A -> - in the <A -HREF="../user-manual/index.html" -TARGET="_top" ->User Manual</A -> which - describes how to do this, and the <A -HREF="misc.html#TOR" -> How do I use Privoxy together with - Tor</A -> section below.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="PORT-80" ->3.18. Can I just set Privoxy to use port 80 -and thus avoid individual browser configuration?</A -></H3 -><P -> No, its more complicated than that. This only works with special kinds - of proxies known as <SPAN -CLASS="QUOTE" ->"intercepting"</SPAN -> proxies (see below).</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="TRANSPARENT" ->3.19. Can Privoxy run as a <SPAN -CLASS="QUOTE" ->"transparent"</SPAN -> proxy?</A -></H3 -><P -> The whole idea of Privoxy is to modify client requests - and server responses in all sorts of ways and therefore - it's not a transparent proxy as described in - <A -HREF="http://tools.ietf.org/html/rfc2616" -TARGET="_top" ->RFC 2616</A ->.</P -><P -> However, some people say <SPAN -CLASS="QUOTE" ->"transparent proxy"</SPAN -> when they - mean <SPAN -CLASS="QUOTE" ->"intercepting proxy"</SPAN ->. If you are one of them, - please read the <A -HREF="#intercepting" -TARGET="_top" ->next entry</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="INTERCEPTING" ->3.20. Can Privoxy run as a <SPAN -CLASS="QUOTE" ->"intercepting"</SPAN -> proxy?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can't intercept traffic itself, - but it can handle requests that where intercepted and redirected - with a packet filter (like <SPAN -CLASS="APPLICATION" ->PF</SPAN -> or - <SPAN -CLASS="APPLICATION" ->iptables</SPAN ->), as long as the <TT -CLASS="LITERAL" ->Host</TT -> - header is present. - </P -><P -> As the <TT -CLASS="LITERAL" ->Host</TT -> header is required by HTTP/1.1 and as most - web sites rely on it anyway, this limitation shouldn't be a problem.</P -><P -> Please refer to your packet filter's documentation to learn how to - intercept and redirect traffic into <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - Afterward you just have to configure <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to - <A -HREF="../user-manual/config.html#ACCEPT-INTERCEPTED-REQUESTS" -TARGET="_top" ->accept - intercepted requests</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="OUTLOOK" ->3.21. How can I configure Privoxy for use with Outlook?</A -></H3 -><P -> Versions of <SPAN -CLASS="APPLICATION" ->Outlook</SPAN -> prior to Office 2007, use - <SPAN -CLASS="APPLICATION" ->Internet Explorer</SPAN -> components to both render HTML, - and fetch any HTTP requests that may be embedded in an HTML email. So however - you have <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> configured to work with IE, this - configuration should automatically be shared, at least with older version of - Internet Explorer.</P -><P -> Starting with Office 2007, Microsoft is instead using the MS-Word rendering - engine with Outlook. It is unknown whether this can be configured to use a - proxy. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="OUTLOOK-MORE" ->3.22. How can I have separate rules just for HTML mail?</A -></H3 -><P -> The short answer is, you can't. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has no way - of knowing which particular application makes a request, so there is no way to - distinguish between web pages and HTML mail. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> just blindly proxies all requests. In the - case of <SPAN -CLASS="APPLICATION" ->Outlook Express</SPAN -> (see above), OE uses - IE anyway, and there is no way for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to ever - be able to distinguish between them (nor could any other proxy type application for - that matter).</P -><P -> For a good discussion of some of the issues involved (including privacy and - security issues), see - <A -HREF="http://sourceforge.net/tracker/?func=detail&atid=211118&aid=629518&…" -TARGET="_top" ->http://sourceforge.net/tracker/?func=detail&atid=211118&aid=629518&…</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="SNEAKY-COOKIES" ->3.23. I sometimes notice cookies sneaking through. How?</A -></H3 -><P -> <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->Cookies</A -> can be - set in several ways. The classic method is via the - <TT -CLASS="LITERAL" ->Set-Cookie</TT -> HTTP header. This is straightforward, and an - easy one to manipulate, such as the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> concept of - <A -HREF="../user-manual/actions-file.html#SESSION-COOKIES-ONLY" -TARGET="_top" ->session-cookies-only</A ->. - There is also the possibility of using - <A -HREF="http://en.wikipedia.org/wiki/Javascript" -TARGET="_top" ->Javascript</A -> to - set cookies (<SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> calls these <TT -CLASS="LITERAL" ->content-cookies</TT ->). This - is trickier because the syntax can vary widely, and thus requires a certain - amount of guesswork. It is not realistic to catch all of these short of - disabling Javascript, which would break many sites. And lastly, if the - cookies are embedded in a HTTPS/SSL secure session via Javascript, they are beyond - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> reach.</P -><P -> All in all, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can help manage cookies in general, can help minimize - the loss of privacy posed by cookies, but can't realistically stop all - cookies.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="EVIL-COOKIES" ->3.24. Are all cookies bad? Why?</A -></H3 -><P -> No, in fact there are many beneficial uses of - <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookies</A ->. Cookies are just a - method that browsers can use to store data between pages, or between browser - sessions. Sometimes there is a good reason for this, and the user's life is a - bit easier as a result. But there is a long history of some websites taking - advantage of this layer of trust, and using the data they glean from you and - your browsing habits for their own purposes, and maybe to your potential - detriment. Such sites are using you and storing their data on your system. - That is why the privacy conscious watch from whom those cookies come, and why - they really <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->need</I -></SPAN -> to be there.</P -><P -> See the - <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->Wikipedia cookie - definition</A -> for more.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="ALLOW-COOKIES" ->3.25. How can I allow permanent cookies for my trusted sites?</A -></H3 -><P -> There are several actions that relate to cookies. The default behavior is to - allow only <SPAN -CLASS="QUOTE" ->"session cookies"</SPAN ->, which means the cookies only last - for the current browser session. This eliminates most kinds of abuse related - to cookies. But there may be cases where you want cookies to last.</P -><P -> To disable all cookie actions, so that cookies are allowed unrestricted, - both in and out, for <TT -CLASS="LITERAL" ->example.com</TT ->: </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only -filter{content-cookies} } - .example.com</PRE -></TD -></TR -></TABLE -></P -><P -> Place the above in <TT -CLASS="FILENAME" ->user.action</TT ->. Note that some of these may - be off by default anyway, so this might be redundant, but there is no harm - being explicit in what you want to happen. <TT -CLASS="FILENAME" ->user.action</TT -> - includes an alias for this situation, called - <TT -CLASS="LITERAL" ->allow-all-cookies</TT ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="MULTIPLES" ->3.26. Can I have separate configurations for different users?</A -></H3 -><P -> Each instance of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has its own - configuration, including such attributes as the TCP port that it listens on. - What you can do is run multiple instances of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, each with - a unique - <A -HREF="../user-manual/config.html#LISTEN-ADDRESS" -TARGET="_top" ->listen-address</A -> - configuration setting, and configuration path, and then - each of these can have their own configurations. Think of it as per-port - configuration.</P -><P -> - Simple enough for a few users, but for large installations, consider having - groups of users that might share like configurations.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="WHITELISTS" ->3.27. Can I set-up Privoxy as a whitelist of -<SPAN -CLASS="QUOTE" ->"good"</SPAN -> sites?</A -></H3 -><P -> Sure. There are a couple of things you can do for simple white-listing. - Here's one real easy one:</P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> ############################################################ - # Blacklist - ############################################################ - { <A -HREF="../user-manual/actions-file.html#BLOCK" -TARGET="_top" ->+block</A -> } - / # Block *all* URLs - - ############################################################ - # Whitelist - ############################################################ - { <A -HREF="../user-manual/actions-file.html#BLOCK" -TARGET="_top" ->-block</A -> } - kids.example.com - toys.example.com - games.example.com</PRE -></TD -></TR -></TABLE -><P -> This allows access to only those three sites by first blocking all URLs, and - then subsequently allowing three specific exceptions.</P -><P -> Another approach is <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - <TT -CLASS="LITERAL" ->trustfile</TT -> concept, which incorporates the notion of - <SPAN -CLASS="QUOTE" ->"trusted referrers"</SPAN ->. See the <A -HREF="../user-manual/config.html#TRUSTFILE" -TARGET="_top" ->Trust documentation</A -> - for details.</P -><P -> These are fairly simple approaches and are not completely foolproof. There - are various other configuration options that should be disabled (described - elsewhere here and in <A -HREF="../user-manual/" -TARGET="_top" ->the User Manual</A ->) - so that users can't modify their own configuration and easily circumvent the - whitelist.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NO-ADBLOCK" ->3.28. How can I turn off ad-blocking?</A -></H3 -><P -> Ad blocking is achieved through a complex application of various <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - <A -HREF="../user-manual/actions-file.html" -TARGET="_top" ->actions</A ->. These - actions are deployed against simple images, banners, flash animations, - text pages, JavaScript, pop-ups and pop-unders, etc., so its not as simple as - just turning one or two actions off. The various actions that make up - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> ad blocking are hard-coded into the default configuration files. It - has been assumed that everyone using <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is interested in this - particular feature. - </P -><P -> If you want to do without this, there are several approaches you can take: - You can manually undo the many block rules in - <TT -CLASS="FILENAME" ->default.action</TT ->. Or even easier, just create your own - <TT -CLASS="FILENAME" ->default.action</TT -> file from scratch without the many ad - blocking rules, and corresponding exceptions. Or lastly, if you are not - concerned about the additional blocks that are done for privacy reasons, you - can very easily over-ride <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> blocking with the - following very simple rule in your <TT -CLASS="FILENAME" ->user.action</TT ->: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # Unblock everybody, everywhere - { <A -HREF="../user-manual/actions-file.html#BLOCK" -TARGET="_top" ->-block</A -> } - / # UN-Block *all* URLs</PRE -></TD -></TR -></TABLE -></P -><P -> - Or even a more comprehensive reversing of various ad related actions:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # Unblock everybody, everywhere, and turn off appropriate filtering, etc - { <A -HREF="../user-manual/actions-file.html#BLOCK" -TARGET="_top" ->-block</A -> \ - <A -HREF="../user-manual/actions-file.html#FILTER-BANNERS-BY-SIZE" -TARGET="_top" ->-filter{banners-by-size}</A -> \ - <A -HREF="../user-manual/actions-file.html#FILTER-BANNERS-BY-LINK" -TARGET="_top" ->-filter{banners-by-link}</A -> \ - <TT -CLASS="LITERAL" ->allow-popups</TT -> \ - } - / # UN-Block *all* URLs and allow ads</PRE -></TD -></TR -></TABLE -></P -><P -> This last <SPAN -CLASS="QUOTE" ->"action"</SPAN -> in this compound statement, - <TT -CLASS="LITERAL" ->allow-popups</TT ->, is an <A -HREF="../user-manual/actions-file.html#ALIASES" -TARGET="_top" ->alias</A -> that disables - various pop-up blocking features.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="TEMPLATES" ->3.29. How can I have custom template pages, like the -<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->BLOCKED</I -></SPAN -> page?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> <SPAN -CLASS="QUOTE" ->"templates"</SPAN -> are specialized text files utilized by - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> for various purposes and can easily be modified using any text - editor. All the template pages are installed in a sub-directory appropriately - named: <TT -CLASS="FILENAME" ->templates</TT ->. Knowing something about HTML syntax - will of course be helpful.</P -><P -> Be forewarned that the default templates are subject to being overwritten - during upgrades. You can, however, create completely new templates, - place them in another directory and specify the alternate path in the main - <TT -CLASS="FILENAME" ->config</TT ->. For details, have a look at the <A -HREF="../user-manual/config.html#templdir" -TARGET="_top" ->templdir</A -> option. </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="BLOCKALL" ->3.30. How can I remove the <SPAN -CLASS="QUOTE" ->"Go There Anyway"</SPAN -> link from -the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->BLOCKED</I -></SPAN -> page?</A -></H3 -><P -> There is more than one way to do it (although Perl is not involved).</P -><P -> Editing the BLOCKED template page (see above) may dissuade some users, but - this method is easily circumvented. Where you need this level of control, you - might want to build <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> from source, and disable various features that are - available as compile-time options. You should - <B -CLASS="COMMAND" ->configure</B -> the sources as follows:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> ./configure --disable-toggle --disable-editor --disable-force</PRE -></TD -></TR -></TABLE -></P -><P -> This will create an executable with hard-coded security features so that - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> does not allow easy bypassing of blocked sites, or changing the - current configuration via any connected user's web browser.</P -><P -> Finally, all of these features can also be toggled on/off via options in - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> main <A -HREF="../user-manual/config.html#ACCESS-CONTROL" -TARGET="_top" ->config</A -> file which - means you don't have to recompile anything.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="installation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="misc.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Installation</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Miscellaneous</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/contact.html b/external/privoxy/doc/webserver/faq/contact.html deleted file mode 100644 index c9d18c7..0000000 --- a/external/privoxy/doc/webserver/faq/contact.html +++ /dev/null @@ -1,510 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Contacting the developers, Bug Reporting and Feature Requests</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Troubleshooting" -HREF="trouble.html"><LINK -REL="NEXT" -TITLE="Privoxy Copyright, License and History" -HREF="copyright.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Frequently Asked Questions</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="trouble.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="copyright.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CONTACT" ->6. Contacting the developers, Bug Reporting and Feature Requests</A -></H1 -><P -> We value your feedback. In fact, we rely on it to improve - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and its configuration. - However, please note the following hints, so we can - provide you with the best support:</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-SUPPORT" ->6.1. Get Support</A -></H2 -><P -> For casual users, our - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=211118" -TARGET="_top" ->support forum at SourceForge</A -> - is probably best suited: - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=211118" -TARGET="_top" ->http://sourceforge.net/tracker/?group_id=11118&atid=211118</A -></P -><P -> All users are of course welcome to discuss their issues on the <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-users" -TARGET="_top" ->users - mailing list</A ->, where the developers also hang around.</P -><P -> Please don't sent private support requests to individual Privoxy - developers, either use the mailing lists or the support trackers.</P -><P -> Note that the Privoxy mailing lists are moderated. Posts from unsubscribed - addresses have to be accepted manually by a moderator. This may cause a - delay of several days and if you use a subject that doesn't clearly - mention Privoxy or one of its features, your message may be accidentally - discarded as spam.</P -><P -> If you aren't subscribed, you should therefore spend a few seconds - to come up with a proper subject. Additionally you should make it clear - that you want to get CC'd. Otherwise some responses will be directed to - the mailing list only, and you won't see them.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="REPORTING" ->6.2. Reporting Problems</A -></H2 -><P -><SPAN -CLASS="QUOTE" ->"Problems"</SPAN -> for our purposes, come in two forms:</P -><P -></P -><UL -><LI -><P -> Configuration issues, such as ads that slip through, or sites that - don't function properly due to one <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - <SPAN -CLASS="QUOTE" ->"action"</SPAN -> or another being turned <SPAN -CLASS="QUOTE" ->"on"</SPAN ->. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"Bugs"</SPAN -> in the programming code that makes up - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, such as that might cause a crash. - </P -></LI -></UL -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="CONTACT-ADS" ->6.2.1. Reporting Ads or Other Configuration Problems</A -></H3 -><P -> Please send feedback on ads that slipped through, innocent images that were - blocked, sites that don't work properly, and other configuration related problem of - <TT -CLASS="FILENAME" ->default.action</TT -> file, to - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=460288" -TARGET="_top" -> http://sourceforge.net/tracker/?group_id=11118&atid=460288</A ->, - the Actions File Tracker.</P -><P -> New, improved <TT -CLASS="FILENAME" ->default.action</TT -> files may occasionally be made - available based on your feedback. These will be announced on the <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce" -TARGET="_top" ->ijbswa-announce</A -> - list and available from our the <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->files section</A -> of - our <A -HREF="http://sf.net/projects/ijbswa/" -TARGET="_top" ->project page</A ->.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="CONTACT-BUGS" ->6.2.2. Reporting Bugs</A -></H3 -><P -> Please report all bugs through our bug tracker: - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=111118" -TARGET="_top" ->http://sourceforge.net/tracker/?group_id=11118&atid=111118</A ->. </P -><P -> Before doing so, please make sure that the bug has <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not already been submitted</I -></SPAN -> - and observe the additional hints at the top of the <A -HREF="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=111118" -TARGET="_top" ->submit - form</A ->. If already submitted, please feel free to add any info to the - original report that might help to solve the issue.</P -><P -> Please try to verify that it is a <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> bug, - and not a browser or site bug or documented behaviour that just happens - to be different than what you expected. If unsure, - try <A -HREF="http://config.privoxy.org/toggle?set=disable" -TARGET="_top" ->toggling - off</A -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, and see if the problem persists.</P -><P -> If you are using your own custom configuration, please try - the stock configs to see if the problem is configuration related. - If you're having problems with a feature that is disabled by default, - please ask around on the mailing list if others can reproduce the problem.</P -><P -> If you aren't using the latest Privoxy version, the bug may have been found - and fixed in the meantime. We would appreciate if you could take the time - to <A -HREF="http://www.privoxy.org/user-manual/installation.html" -TARGET="_top" ->upgrade - to the latest version</A -> (or even the latest CVS snapshot) and verify - that your bug still exists.</P -><P ->Please be sure to provide the following information:</P -><P -> <P -></P -><UL -><LI -><P -> The exact <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version you are using - (if you got the source from CVS, please also provide the source code revisions - as shown in <A -HREF="http://config.privoxy.org/show-version" -TARGET="_top" ->http://config.privoxy.org/show-version</A ->). - </P -></LI -><LI -><P -> The operating system and versions you run - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on, (e.g. <SPAN -CLASS="APPLICATION" ->Windows - XP SP2</SPAN ->), if you are using a Unix flavor, - sending the output of <SPAN -CLASS="QUOTE" ->"uname -a"</SPAN -> should do, - in case of GNU/Linux, please also name the distribution. - </P -></LI -><LI -><P -> The name, platform, and version of the <SPAN -CLASS="APPLICATION" ->browser</SPAN -> - you were using (e.g. <SPAN -CLASS="APPLICATION" ->Internet Explorer v5.5</SPAN -> for Mac). - </P -></LI -><LI -><P -> The URL where the problem occurred, or some way for us to duplicate the - problem (e.g. <TT -CLASS="LITERAL" ->http://somesite.example.com/?somethingelse=123</TT ->). - </P -></LI -><LI -><P -> Whether your version of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is one supplied - by the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developers via SourceForge, - or if you got your copy somewhere else. - </P -></LI -><LI -><P -> Whether you are using <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in tandem with - another proxy such as <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->. If so, please - temporary disable the other proxy to see if the symptoms change. - </P -></LI -><LI -><P -> Whether you are using a personal firewall product. If so, does - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> work without it? - </P -></LI -><LI -><P -> Any other pertinent information to help identify the problem such as config - or log file excerpts (yes, you should have log file entries for each - action taken). - </P -></LI -></UL -></P -><P -> You don't have to tell us your actual name when filing a problem - report, but please use a nickname so we can differentiate between - your messages and the ones entered by other "anonymous" users that - may respond to your request if they have the same problem or already - found a solution.</P -><P -> Please also check the status of your request a few days after submitting - it, as we may request additional information. If you use a SF id, - you should automatically get a mail when someone responds to your request.</P -><P -> The <A -HREF="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT" -TARGET="_top" ->appendix - of the Privoxy User Manual</A -> also has helpful information - on understanding <TT -CLASS="LITERAL" ->actions</TT ->, and <TT -CLASS="LITERAL" ->action</TT -> debugging. </P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-FEATURE" ->6.3. Request New Features</A -></H2 -><P -> You are welcome to submit ideas on new features or other proposals - for improvement through our feature request tracker at - <A -HREF="http://sourceforge.net/tracker/?atid=361118&group_id=11118" -TARGET="_top" ->http://sourceforge.net/tracker/?atid=361118&group_id=11118</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-OTHER" ->6.4. Other</A -></H2 -><P ->For any other issues, feel free to use the mailing lists. Technically interested users -and people who wish to contribute to the project are also welcome on the developers list! -You can find an overview of all <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->-related mailing lists, -including list archives, at: -<A -HREF="http://sourceforge.net/mail/?group_id=11118" -TARGET="_top" ->http://sourceforge.net/mail/?group_id=11118</A ->.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="trouble.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="copyright.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Troubleshooting</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Privoxy Copyright, License and History</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/copyright.html b/external/privoxy/doc/webserver/faq/copyright.html deleted file mode 100644 index 39b71a6..0000000 --- a/external/privoxy/doc/webserver/faq/copyright.html +++ /dev/null @@ -1,301 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy Copyright, License and History</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Contacting the developers, Bug Reporting and Feature Requests" -HREF="contact.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Frequently Asked Questions</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="contact.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -> </TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="COPYRIGHT" ->7. Privoxy Copyright, License and History</A -></H1 -><P -> Copyright © 2001-2009 by Privoxy Developers <CODE -CLASS="EMAIL" -><<A -HREF="mailto:ijbswa-developers@lists.sourceforge.net" ->ijbswa-developers(a)lists.sourceforge.net</A ->></CODE -></P -><P -> Some source code is based on code Copyright © 1997 by Anonymous Coders - and Junkbusters, Inc. and licensed under the <I -CLASS="CITETITLE" ->GNU General Public - License</I ->.</P -><P -> Portions of this document are <SPAN -CLASS="QUOTE" ->"borrowed"</SPAN -> from the original - <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> (tm) FAQ, and modified as - appropriate for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - </P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN1451" ->7.1. License</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is free software; you can - redistribute it and/or modify it under the terms of the - <I -CLASS="CITETITLE" ->GNU General Public License</I ->, version 2, - as published by the Free Software Foundation.</P -><P -> This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" -> <I -CLASS="CITETITLE" ->GNU General Public License</I -></A -> for details.</P -><P -> You should have received a copy of the <I -CLASS="CITETITLE" ->GNU GPL</I -> - along with this program; if not, write to the <P -CLASS="ADDRESS" -> Free Software<br> - Foundation, Inc. <SPAN -CLASS="STREET" ->51 Franklin Street, Fifth Floor</SPAN -><br> - <SPAN -CLASS="CITY" ->Boston</SPAN ->, <SPAN -CLASS="STATE" ->MA</SPAN -> <SPAN -CLASS="POSTCODE" ->02110-1301</SPAN -><br> - <SPAN -CLASS="COUNTRY" ->USA</SPAN -> </P -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN1467" ->7.2. History</A -></H2 -><P -> A long time ago, there was the - <A -HREF="http://www.junkbusters.com/ijb.html" -TARGET="_top" -><SPAN -CLASS="APPLICATION" ->Internet Junkbuster</SPAN -></A ->, - by Anonymous Coders and <A -HREF="http://www.junkbusters.com/" -TARGET="_top" ->Junkbusters - Corporation</A ->. This saved many users a lot of pain in the early days of - web advertising and user tracking.</P -><P -> But the web, its protocols and standards, and with it, the techniques for - forcing ads on users, give up autonomy over their browsing, and - for tracking them, keeps evolving. Unfortunately, the <SPAN -CLASS="APPLICATION" ->Internet - Junkbuster</SPAN -> did not. Version 2.0.2, published in 1998, was - (and is) the last official - <A -HREF="http://www.junkbusters.com/ijbdist.html#release" -TARGET="_top" ->release</A -> - available from <A -HREF="http://www.junkbusters.com" -TARGET="_top" ->Junkbusters Corporation</A ->. - Fortunately, it had been released under the GNU - <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" ->GPL</A ->, - which allowed further development by others.</P -><P -> So Stefan Waldherr started maintaining an improved version of the - software, to which eventually a number of people contributed patches. - It could already replace banners with a transparent image, and had a first - version of pop-up killing, but it was still very closely based on the - original, with all its limitations, such as the lack of HTTP/1.1 support, - flexible per-site configuration, or content modification. The last release - from this effort was version 2.0.2-10, published in 2000.</P -><P -> Then, some - <A -HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS" -TARGET="_top" ->developers</A -> - picked up the thread, and started turning the software inside out, upside down, - and then reassembled it, adding many - <A -HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES" -TARGET="_top" ->new - features</A -> along the way.</P -><P -> The result of this is <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, whose first - stable version, 3.0, was released August, 2002. - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="contact.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -> </TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Contacting the developers, Bug Reporting and Feature Requests</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -> </TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/general.html b/external/privoxy/doc/webserver/faq/general.html deleted file mode 100644 index 7043b18..0000000 --- a/external/privoxy/doc/webserver/faq/general.html +++ /dev/null @@ -1,1076 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->General Information</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="NEXT" -TITLE="Installation" -HREF="installation.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Frequently Asked Questions</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="index.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="installation.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="GENERAL" ->1. General Information</A -></H1 -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="WHO-USES" ->1.1. Who should give <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> a try?</A -></H3 -><P -> Anyone who is interested in security, privacy, or in - finer-grained control over their web and Internet experience. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="BESTCHOICE" ->1.2. Is Privoxy the best choice for -me?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is certainly a good choice, especially for those who want more - control and security. Those with the willingness to read the documentation - and the ability to fine-tune their installation will benefit the most. - </P -><P -> One of <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - strengths is that it is highly configurable giving you the ability to - completely personalize your installation. Being familiar with, or at least - having an interest in learning about <A -HREF="http://en.wikipedia.org/wiki/Http" -TARGET="_top" ->HTTP</A -> and other networking - protocols, <A -HREF="http://en.wikipedia.org/wiki/Html" -TARGET="_top" ->HTML</A ->, and - <A -HREF="http://en.wikipedia.org/wiki/Regular_expressions" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"Regular - Expressions"</SPAN -></A -> - will be a big plus and will help you get the most out of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - A new installation just includes a very basic configuration. The user - should take this as a starting point only, and enhance it as he or she - sees fit. In fact, the user is encouraged, and expected to, fine-tune the - configuration. - </P -><P -> Much of <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> configuration can be done - with a <A -HREF="http://en.wikipedia.org/wiki/Web_browser" -TARGET="_top" ->Web browser</A ->. - But there are areas where configuration is done using a - <A -HREF="http://en.wikipedia.org/wiki/Text_editors" -TARGET="_top" ->text editor</A -> - to edit configuration files. Also note that the web-based action editor - doesn't use authentication and should only be enabled in environments - where all clients with access to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> listening port can be trusted. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="PROXYMORON" ->1.3. What is a <SPAN -CLASS="QUOTE" ->"proxy"</SPAN ->? How does -Privoxy work?</A -></H3 -><P -> A <A -HREF="http://en.wikipedia.org/wiki/Proxy_server" -TARGET="_top" ->web proxy</A -> - is a service, based on a software such as <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, that clients - (i.e. browsers) can use instead of connecting to web servers directly. - The clients then ask the proxy to request objects (web pages, images, movies etc) - on their behalf and to forward the data to the clients. - It is a <SPAN -CLASS="QUOTE" ->"go-between"</SPAN ->. For details, see - <A -HREF="http://en.wikipedia.org/wiki/Proxy_server" -TARGET="_top" ->Wikipedia's proxy definition</A ->. - </P -><P -> There are many reasons to use web proxies, such as security (firewalling), - efficiency (caching) and others, and there are any number of proxies - to accommodate those needs. - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is a proxy that is primarily focused on - privacy enhancement, ad and junk elimination and freeing the user from - restrictions placed on his activities. Sitting between your browser(s) and the Internet, - it is in a perfect position to filter outbound personal information that your - browser is leaking, as well as inbound junk. It uses a variety of techniques to do - this, all of which are under your complete control via the various configuration - files and options. Being a proxy also makes it easier to share - configurations among multiple browsers and/or users. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="OTHERSTUFF" ->1.4. Does Privoxy do anything more than ad blocking?</A -></H3 -><P -> - Yes, ad blocking is but one possible use. There are many, many ways <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - can be used to sanitize and customize web browsing. </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NEWJB" ->1.5. What is this new version of -<SPAN -CLASS="QUOTE" ->"Junkbuster"</SPAN ->?</A -></H3 -><P -> A long time ago, there was the - <A -HREF="http://www.junkbusters.com/ijb.html" -TARGET="_top" -><SPAN -CLASS="APPLICATION" ->Internet Junkbuster</SPAN -></A ->, - by Anonymous Coders and <A -HREF="http://www.junkbusters.com/" -TARGET="_top" ->Junkbusters - Corporation</A ->. This saved many users a lot of pain in the early days of - web advertising and user tracking.</P -><P -> But the web, its protocols and standards, and with it, the techniques for - forcing ads on users, give up autonomy over their browsing, and - for tracking them, keeps evolving. Unfortunately, the <SPAN -CLASS="APPLICATION" ->Internet - Junkbuster</SPAN -> did not. Version 2.0.2, published in 1998, was - (and is) the last official - <A -HREF="http://www.junkbusters.com/ijbdist.html#release" -TARGET="_top" ->release</A -> - available from <A -HREF="http://www.junkbusters.com" -TARGET="_top" ->Junkbusters Corporation</A ->. - Fortunately, it had been released under the GNU - <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" ->GPL</A ->, - which allowed further development by others.</P -><P -> So Stefan Waldherr started maintaining an improved version of the - software, to which eventually a number of people contributed patches. - It could already replace banners with a transparent image, and had a first - version of pop-up killing, but it was still very closely based on the - original, with all its limitations, such as the lack of HTTP/1.1 support, - flexible per-site configuration, or content modification. The last release - from this effort was version 2.0.2-10, published in 2000.</P -><P -> Then, some - <A -HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS" -TARGET="_top" ->developers</A -> - picked up the thread, and started turning the software inside out, upside down, - and then reassembled it, adding many - <A -HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES" -TARGET="_top" ->new - features</A -> along the way.</P -><P -> The result of this is <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, whose first - stable version, 3.0, was released August, 2002. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN78" ->1.6. Why <SPAN -CLASS="QUOTE" ->"Privoxy"</SPAN ->? Why change the name from -Junkbuster at all?</A -></H3 -><P -> Though outdated, <A -HREF="http://junkbusters.com/" -TARGET="_top" ->Junkbusters Corporation</A -> - continues to offer their original version of the <SPAN -CLASS="APPLICATION" ->Internet - Junkbuster</SPAN ->, so publishing our - <SPAN -CLASS="APPLICATION" -> Junkbuster</SPAN ->-derived software under the same name - led to confusion.</P -><P -> There are also potential legal complications from our use of the - <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> name, which is a registered trademark of - <A -HREF="http://junkbusters.com/" -TARGET="_top" ->Junkbusters Corporation</A ->. - There are, however, no objections from Junkbusters Corporation to the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> project itself, and they, in fact, still - share our ideals and goals.</P -><P -> The developers also believed that there are so many improvements over the original - code, that it was time to make a clean break from the past and make - a name in their own right.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is the - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Privacy Enhancing Proxy</I -></SPAN ->"</SPAN ->. Also, its content - modification and junk suppression gives <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->you</I -></SPAN ->, the user, more - control, more freedom, and allows you to browse your personal and - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->private</I -></SPAN -> edition"</SPAN -> of the web.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DIFFERS" ->1.7. How does Privoxy differ -from the old Junkbuster?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> picks up where - <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> left off. - The new <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> still blocks ads and banners, - still manages <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookies</A ->, and still - helps protect your privacy. But, most of these features have been enhanced, - and many new ones have been added, all in the same vein. - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s new features include:</P -><P -> <P -></P -><UL -><LI -><P -> Can keep outgoing connections alive and reuse them later on. - </P -></LI -><LI -><P -> Supports tagging which allows to change the behaviour - based on client and server headers. - </P -></LI -><LI -><P -> Can be run as an "intercepting" proxy, which obviates the need to - configure browsers individually. - </P -></LI -><LI -><P -> Sophisticated actions and filters for manipulating both server and client - headers. - </P -></LI -><LI -><P -> Can be chained with other proxies. - </P -></LI -><LI -><P -> Integrated browser based configuration and control utility at <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> - (shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->). Browser-based - tracing of rule and filter effects. Remote toggling. - </P -></LI -><LI -><P -> Web page filtering (text replacements, removes banners based on size, - invisible <SPAN -CLASS="QUOTE" ->"web-bugs"</SPAN ->, JavaScript and HTML annoyances, - pop-up windows, etc.) - </P -></LI -><LI -><P -> Modularized configuration that allows for standard settings and - user settings to reside in separate files, so that installing updated - actions files won't overwrite individual user settings. - </P -></LI -><LI -><P -> Support for Perl Compatible Regular Expressions in the configuration files, and - a more sophisticated and flexible configuration syntax. - </P -></LI -><LI -><P -> Improved cookie management features (e.g. session based cookies). - </P -></LI -><LI -><P -> GIF de-animation. - </P -></LI -><LI -><P -> Bypass many click-tracking scripts (avoids script redirection). - </P -></LI -><LI -><P -> Multi-threaded (POSIX and native threads). - </P -></LI -><LI -><P -> User-customizable HTML templates for most proxy-generated pages (e.g. "blocked" page). - </P -></LI -><LI -><P -> Auto-detection and re-reading of config file changes. - </P -></LI -><LI -><P -> Improved signal handling, and a true daemon mode (Unix). - </P -></LI -><LI -><P -> Every feature now controllable on a per-site or per-location basis, configuration - more powerful and versatile over-all. - </P -></LI -><LI -><P -> Many smaller new features added, limitations and bugs removed. - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="WHATSANAD" ->1.8. How does Privoxy know what is -an ad, and what is not?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s approach to blocking ads is twofold:</P -><P -> First, there are certain patterns in the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->locations</I -></SPAN -> (URLs) - of banner images. This applies to both the path (you wouldn't guess how many - web sites serve their banners from a directory called <SPAN -CLASS="QUOTE" ->"banners"</SPAN ->!) - and the host (blocking the big banner hosting services like doublecklick.net - already helps a lot). <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> takes advantage of this - fact by using <A -HREF="../user-manual/actions-file.html#AF-PATTERNS" -TARGET="_top" ->URL - patterns</A -> to sort out and block the requests for things that sound - like they would be ads or banners.</P -><P -> Second, banners tend to come in certain <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->sizes</I -></SPAN ->. But you - can't tell the size of an image by its URL without downloading it, and if you - do, it's too late to save bandwidth. Therefore, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - also inspects the HTML sources of web pages while they are loaded, and replaces - references to images with standard banner sizes by dummy references, so that - your browser doesn't request them anymore in the first place.</P -><P -> Both of this involves a certain amount of guesswork and is, of course, freely - and readily configurable.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN160" ->1.9. Can Privoxy make mistakes? -This does not sound very scientific.</A -></H3 -><P -> Actually, it's a black art ;-) And yes, it is always possible to have a broad - rule accidentally block or change something by mistake. You will almost surely - run into such situations at some point. It is tricky writing rules to - cover every conceivable possibility, and not occasionally get false positives.</P -><P -> But this should not be a big concern since the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> configuration is very flexible, and - includes tools to help identify these types of situations so they can be - addressed as needed, allowing you to customize your installation. - (<A -HREF="trouble.html#BADSITE" ->See the Troubleshooting section below</A ->.)</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN166" ->1.10. Will I have to configure Privoxy - before I can use it?</A -></H3 -><P -> That depends on your expectations. - The default installation should give you a good starting - point, and block <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->most</I -></SPAN -> ads and unwanted content, - but many of the more advanced features are off by default, and require - you to activate them. </P -><P -> You do have to set up your browser to use - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> (see the <A -HREF="installation.html#FIRSTSTEP" ->Installation section below</A ->). </P -><P -> And you will certainly run into situations where there are false positives, - or ads not being blocked that you may not want to see. In these cases, you - would certainly benefit by customizing <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - configuration to more closely match your individual situation. And we - encourage you to do this. This is where the real power of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> lies!</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="LAN" ->1.11. Can Privoxy run as a server on a network?</A -></H3 -><P -> - Yes, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> runs as a server already, and can easily be configured to - <SPAN -CLASS="QUOTE" ->"serve"</SPAN -> more than one client. See <A -HREF="configuration.html#LANCONFIG" -> How can I set up Privoxy to act as a proxy for my LAN</A -> below.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="BROWSERS2" ->1.12. My browser does the same things as -Privoxy. Why should I use Privoxy at all?</A -></H3 -><P -> Modern browsers do indeed have <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->some</I -></SPAN -> of the same - functionality as <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. Maybe this is - adequate for you. But <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is very - versatile and powerful, and can probably do a number of things - your browser just can't. - </P -><P -> In addition, a proxy is good choice if you use multiple browsers, or - have a LAN with multiple computers since <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can run as a server - application. This way all the configuration is in one place, and you don't - have to maintain a similar configuration for possibly many browsers or - users. - </P -><P -> Note, however, that it's recommended to leverage both your browser's - and <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> privacy enhancing features - at the same time. While your browser probably lacks some features - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> offers, it should also be able to do some things more - reliable, for example restricting and suppressing JavaScript. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="WHYTRUST" ->1.13. Why should I trust Privoxy?</A -></H3 -><P -> The most important reason is because you have access to - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->everything</I -></SPAN ->, and you can control everything. You can - check every line of every configuration file yourself. You can check every - last bit of source code should you desire. And even if you can't read code, - there should be some comfort in knowing that other people can, - and do read it. You can build the software from scratch, if you want, - so that you know the executable is clean, and that it is - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->yours</I -></SPAN ->. In fact, we encourage this level of scrutiny. It - is one reason we use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> ourselves. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="LICENSE" ->1.14. Is there is a license or fee? What about a -warranty? Registration?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is free software and licensed under the <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" ->GNU General Public License (GPL) version 2</A ->. - It is free to use, copy, modify or distribute as you wish under the terms of this - license. Please see the <A -HREF="copyright.html" ->Copyright</A -> section for more - information on the license and copyright. Or the <TT -CLASS="FILENAME" ->LICENSE</TT -> file - that should be included. - </P -><P -> There is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->no warranty</I -></SPAN -> of any kind, expressed, implied or otherwise. - That is something that would cost real money ;-) There is no registration either. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="SPYWARE" ->1.15. Can Privoxy remove spyware? Adware? Viruses?</A -></H3 -><P -> No, at least not reliably enough to trust it. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is not designed to be - a malware removal tool and the default configuration doesn't even try to - filter out any malware.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> could help prevent contact from (known) sites that use such - tactics with appropriate configuration rules, and thus could conceivably - prevent contamination from such sites. However, keeping such a configuration - up to date would require a lot of time and effort that would be better spend - on keeping your software itself up to date so it doesn't have known - vulnerabilities.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="OTHERADS" ->1.16. Can I use Privoxy with other ad-blocking software?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> should work fine with other proxies and other software in general.</P -><P -> But it is probably not necessary to use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in conjunction with other - ad-blocking products, and this could conceivably cause undesirable results. - It might be better to choose one software or the other and work a little to - tweak its configuration to your liking.</P -><P -> Note that this is an advice specific to ad blocking.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="JOINTEAM" ->1.17. I would like to help you, what can I do?</A -></H3 -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="JOINTEAM-WORK" ->1.17.1. Would you like to participate?</A -></H4 -><P -> Well, we <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->always</I -></SPAN -> need help. There is something for - everybody who wants to help us. We welcome new developers, packagers, - testers, documentation writers or really anyone with a desire to help in - any way. You <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->DO NOT</I -></SPAN -> need to be a - <SPAN -CLASS="QUOTE" ->"programmer"</SPAN ->. There are many other tasks available. In fact, - the programmers often can't spend as much time programming because of some - of the other, more mundane things that need to be done, like checking the - Tracker feedback sections. - </P -><P -> So first thing, <A -HREF="https://sourceforge.net/account/register.php" -TARGET="_top" ->get an account on SourceForge.net</A -> - and mail your id to the <A -HREF="mailto:ijbswa-developers@lists.sourceforge.net" -TARGET="_top" ->developers - mailing list</A ->. Then, please read the <A -HREF="../developer-manual/index.html" -TARGET="_top" ->Developer's Manual</A ->, at least - the pertinent sections.</P -><P -> You can also start helping out without SourceForge.net account, - simply by showing up on the mailing list, helping out other users, - providing general feedback or reporting problems you noticed. - </P -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="DONATE" ->1.17.2. Would you like to donate?</A -></H4 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is developed by unpaid volunteers - and thus our current running costs are pretty low. Nevertheless, we - have plans that will cost money in the future. We would like to get - this money through donations made by our users.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has therefore become an associated - project of <A -HREF="http://www.spi-inc.org/about-spi/about-spi" -TARGET="_top" ->Software - in the Public Interest (SPI)</A ->, which allows us to receive tax-deductible - donations in most western countries.</P -><P -> We intend to use the donations to pay for our domain after transfering - it to SPI. Our goal is to make sure there's no single point of failure - and the bill gets paid and the site keeps running even if a some of - the currently active developers were to suddenly disappear for a while.</P -><P -> We would also like to spend some money on more reliable hosting, - on hardware to help make sure <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - keeps running on platforms the developers currently can't test on, - and on technical books to educate our developers about said platforms - or to improve their knowledge in general.</P -><P -> If you enjoy our software and feel like helping out with a donation, - please have a look at - <A -HREF="http://www.spi-inc.org/donations" -TARGET="_top" ->SPI's donation page</A -> - to see what the options are.</P -><P -></P -></DIV -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="installation.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Privoxy Frequently Asked Questions</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Installation</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/index.html b/external/privoxy/doc/webserver/faq/index.html deleted file mode 100644 index cec0d7c..0000000 --- a/external/privoxy/doc/webserver/faq/index.html +++ /dev/null @@ -1,999 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy Frequently Asked Questions</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="NEXT" -TITLE="General Information" -HREF="general.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="ARTICLE" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="ARTICLE" -><DIV -CLASS="TITLEPAGE" -><H1 -CLASS="TITLE" -><A -NAME="AEN2" ->Privoxy Frequently Asked Questions</A -></H1 -><P -CLASS="PUBDATE" -> <SUB -> <A -HREF="copyright.html" ->Copyright</A -> © 2001-2009 by - <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->Privoxy Developers</A -> - </SUB -><BR></P -><P -CLASS="PUBDATE" ->$Id: index.html,v 1.51 2009/03/21 12:59:04 fabiankeil Exp $<BR></P -><DIV -><DIV -CLASS="ABSTRACT" -><P -></P -><A -NAME="AEN9" -></A -><P -> This FAQ gives quick answers to frequently asked questions about - <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->Privoxy</A ->. - It is not a substitute for the - <A -HREF="../user-manual/index.html" -TARGET="_top" -><I -CLASS="CITETITLE" ->Privoxy User Manual</I -></A ->. - - </P -><P ->What is Privoxy?</P -><P -> Privoxy is a non-caching web proxy with advanced filtering capabilities - for enhancing privacy, modifying web page data and HTTP headers, controlling - access, and removing ads and other obnoxious Internet junk. Privoxy has a - flexible configuration and can be customized to suit individual needs and tastes. - It has application for both stand-alone systems and multi-user networks.</P -><P -> Privoxy is Free Software and licensed under the GPL2.</P -><P -> Privoxy is an associated project of Software in the Public Interest (SPI). - <A -HREF="http://www.privoxy.org/faq/general.html#DONATE" -TARGET="_top" ->Donations are welcome</A ->.</P -><P -> Please note that this document is a work in progress. This copy represents - the state at the release of version 3.0.12. - You can find the latest version of the document at <A -HREF="http://www.privoxy.org/faq/" -TARGET="_top" ->http://www.privoxy.org/faq/</A ->. - Please see the <A -HREF="contact.html" ->Contact section</A -> if you want to - contact the developers. - </P -><P -></P -></DIV -></DIV -><HR></DIV -><DIV -CLASS="TOC" -><DL -><DT -><B ->Table of Contents</B -></DT -><DT ->1. <A -HREF="general.html" ->General Information</A -></DT -><DD -><DL -><DT ->1.1. <A -HREF="general.html#WHO-USES" ->Who should give <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> a try?</A -></DT -><DT ->1.2. <A -HREF="general.html#BESTCHOICE" ->Is Privoxy the best choice for -me?</A -></DT -><DT ->1.3. <A -HREF="general.html#PROXYMORON" ->What is a <SPAN -CLASS="QUOTE" ->"proxy"</SPAN ->? How does -Privoxy work?</A -></DT -><DT ->1.4. <A -HREF="general.html#OTHERSTUFF" ->Does Privoxy do anything more than ad blocking?</A -></DT -><DT ->1.5. <A -HREF="general.html#NEWJB" ->What is this new version of -<SPAN -CLASS="QUOTE" ->"Junkbuster"</SPAN ->?</A -></DT -><DT ->1.6. <A -HREF="general.html#AEN78" ->Why <SPAN -CLASS="QUOTE" ->"Privoxy"</SPAN ->? Why change the name from -Junkbuster at all?</A -></DT -><DT ->1.7. <A -HREF="general.html#DIFFERS" ->How does Privoxy differ -from the old Junkbuster?</A -></DT -><DT ->1.8. <A -HREF="general.html#WHATSANAD" ->How does Privoxy know what is -an ad, and what is not?</A -></DT -><DT ->1.9. <A -HREF="general.html#AEN160" ->Can Privoxy make mistakes? -This does not sound very scientific.</A -></DT -><DT ->1.10. <A -HREF="general.html#AEN166" ->Will I have to configure Privoxy - before I can use it?</A -></DT -><DT ->1.11. <A -HREF="general.html#LAN" ->Can Privoxy run as a server on a network?</A -></DT -><DT ->1.12. <A -HREF="general.html#BROWSERS2" ->My browser does the same things as -Privoxy. Why should I use Privoxy at all?</A -></DT -><DT ->1.13. <A -HREF="general.html#WHYTRUST" ->Why should I trust Privoxy?</A -></DT -><DT ->1.14. <A -HREF="general.html#LICENSE" ->Is there is a license or fee? What about a -warranty? Registration?</A -></DT -><DT ->1.15. <A -HREF="general.html#SPYWARE" ->Can Privoxy remove spyware? Adware? Viruses?</A -></DT -><DT ->1.16. <A -HREF="general.html#OTHERADS" ->Can I use Privoxy with other ad-blocking software?</A -></DT -><DT ->1.17. <A -HREF="general.html#JOINTEAM" ->I would like to help you, what can I do?</A -></DT -><DD -><DL -><DT ->1.17.1. <A -HREF="general.html#JOINTEAM-WORK" ->Would you like to participate?</A -></DT -><DT ->1.17.2. <A -HREF="general.html#DONATE" ->Would you like to donate?</A -></DT -></DL -></DD -></DL -></DD -><DT ->2. <A -HREF="installation.html" ->Installation</A -></DT -><DD -><DL -><DT ->2.1. <A -HREF="installation.html#WHICHBROWSERS" ->Which browsers are supported by Privoxy?</A -></DT -><DT ->2.2. <A -HREF="installation.html#WHICHOS" ->Which operating systems are supported?</A -></DT -><DT ->2.3. <A -HREF="installation.html#EMAIL-CLIENT" ->Can I use Privoxy with my email client?</A -></DT -><DT ->2.4. <A -HREF="installation.html#FIRSTSTEP" ->I just installed Privoxy. Is there anything -special I have to do now?</A -></DT -><DT ->2.5. <A -HREF="installation.html#LOCALHOST" ->What is the proxy address of Privoxy?</A -></DT -><DT ->2.6. <A -HREF="installation.html#NOTHING" ->I just installed Privoxy, and nothing is happening. -All the ads are there. What's wrong?</A -></DT -><DT ->2.7. <A -HREF="installation.html#NOTUSED" ->I get a <SPAN -CLASS="QUOTE" ->"Privoxy is not being used"</SPAN -> dummy page although -Privoxy is running and being used.</A -></DT -></DL -></DD -><DT ->3. <A -HREF="configuration.html" ->Configuration</A -></DT -><DD -><DL -><DT ->3.1. <A -HREF="configuration.html#AEN354" ->What exactly is an <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> file?</A -></DT -><DT ->3.2. <A -HREF="configuration.html#ACTIONSS" ->The <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> concept confuses me. Please list -some of these <SPAN -CLASS="QUOTE" ->"actions"</SPAN ->.</A -></DT -><DT ->3.3. <A -HREF="configuration.html#AEN377" ->How are actions files configured? What is the easiest -way to do this?</A -></DT -><DT ->3.4. <A -HREF="configuration.html#AEN386" ->There are several different <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> files. What are -the differences?</A -></DT -><DT ->3.5. <A -HREF="configuration.html#GETUPDATES" ->Where can I get updated Actions Files?</A -></DT -><DT ->3.6. <A -HREF="configuration.html#NEWCONFIG" ->Can I use my old config files?</A -></DT -><DT ->3.7. <A -HREF="configuration.html#DIFFICULT" ->Why is the configuration so complicated?</A -></DT -><DT ->3.8. <A -HREF="configuration.html#YAHOO" ->How can I make my Yahoo/Hotmail/Gmail account work?</A -></DT -><DT ->3.9. <A -HREF="configuration.html#CONFIGFILES" ->What's the difference between the -<SPAN -CLASS="QUOTE" ->"Cautious"</SPAN ->, <SPAN -CLASS="QUOTE" ->"Medium"</SPAN -> and <SPAN -CLASS="QUOTE" ->"Advanced"</SPAN -> defaults?</A -></DT -><DT ->3.10. <A -HREF="configuration.html#BROWSECONFIG" ->Why can I change the configuration -with a browser? Does that not raise security issues?</A -></DT -><DT ->3.11. <A -HREF="configuration.html#AEN481" ->What is the <TT -CLASS="FILENAME" ->default.filter</TT -> file? What is a <SPAN -CLASS="QUOTE" ->"filter"</SPAN ->?</A -></DT -><DT ->3.12. <A -HREF="configuration.html#LANCONFIG" ->How can I set up Privoxy to act as a proxy for my - LAN?</A -></DT -><DT ->3.13. <A -HREF="configuration.html#AEN532" ->Instead of ads, now I get a checkerboard pattern. I don't want to see anything.</A -></DT -><DT ->3.14. <A -HREF="configuration.html#AEN549" ->Why would anybody want to see a checkerboard pattern?</A -></DT -><DT ->3.15. <A -HREF="configuration.html#AEN555" ->I see some images being replaced with text -instead of the checkerboard image. Why and how do I get rid of this?</A -></DT -><DT ->3.16. <A -HREF="configuration.html#SRVANY" ->Can Privoxy run as a service -on Win2K/NT/XP?</A -></DT -><DT ->3.17. <A -HREF="configuration.html#OTHERPROXY" ->How can I make Privoxy work with other -proxies like Squid or Tor?</A -></DT -><DT ->3.18. <A -HREF="configuration.html#PORT-80" ->Can I just set Privoxy to use port 80 -and thus avoid individual browser configuration?</A -></DT -><DT ->3.19. <A -HREF="configuration.html#TRANSPARENT" ->Can Privoxy run as a <SPAN -CLASS="QUOTE" ->"transparent"</SPAN -> proxy?</A -></DT -><DT ->3.20. <A -HREF="configuration.html#INTERCEPTING" ->Can Privoxy run as a <SPAN -CLASS="QUOTE" ->"intercepting"</SPAN -> proxy?</A -></DT -><DT ->3.21. <A -HREF="configuration.html#OUTLOOK" ->How can I configure Privoxy for use with Outlook?</A -></DT -><DT ->3.22. <A -HREF="configuration.html#OUTLOOK-MORE" ->How can I have separate rules just for HTML mail?</A -></DT -><DT ->3.23. <A -HREF="configuration.html#SNEAKY-COOKIES" ->I sometimes notice cookies sneaking through. How?</A -></DT -><DT ->3.24. <A -HREF="configuration.html#EVIL-COOKIES" ->Are all cookies bad? Why?</A -></DT -><DT ->3.25. <A -HREF="configuration.html#ALLOW-COOKIES" ->How can I allow permanent cookies for my trusted sites?</A -></DT -><DT ->3.26. <A -HREF="configuration.html#MULTIPLES" ->Can I have separate configurations for different users?</A -></DT -><DT ->3.27. <A -HREF="configuration.html#WHITELISTS" ->Can I set-up Privoxy as a whitelist of -<SPAN -CLASS="QUOTE" ->"good"</SPAN -> sites?</A -></DT -><DT ->3.28. <A -HREF="configuration.html#NO-ADBLOCK" ->How can I turn off ad-blocking?</A -></DT -><DT ->3.29. <A -HREF="configuration.html#TEMPLATES" ->How can I have custom template pages, like the -<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->BLOCKED</I -></SPAN -> page?</A -></DT -><DT ->3.30. <A -HREF="configuration.html#BLOCKALL" ->How can I remove the <SPAN -CLASS="QUOTE" ->"Go There Anyway"</SPAN -> link from -the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->BLOCKED</I -></SPAN -> page?</A -></DT -></DL -></DD -><DT ->4. <A -HREF="misc.html" ->Miscellaneous</A -></DT -><DD -><DL -><DT ->4.1. <A -HREF="misc.html#AEN729" ->How much does Privoxy slow my browsing down? This -has to add extra time to browsing.</A -></DT -><DT ->4.2. <A -HREF="misc.html#LOADINGTIMES" ->I notice considerable -delays in page requests. What's wrong?</A -></DT -><DT ->4.3. <A -HREF="misc.html#CONFIGURL" ->What are "http://config.privoxy.org/" and -"http://p.p/"?</A -></DT -><DT ->4.4. <A -HREF="misc.html#NEWADS" ->How can I submit new ads, or report -problems?</A -></DT -><DT ->4.5. <A -HREF="misc.html#NEWADS2" ->If I do submit missed ads, will -they be included in future updates?</A -></DT -><DT ->4.6. <A -HREF="misc.html#NOONECARES" ->Why doesn't anyone answer my support -request?</A -></DT -><DT ->4.7. <A -HREF="misc.html#IP" ->How can I hide my IP address?</A -></DT -><DT ->4.8. <A -HREF="misc.html#AEN794" ->Can Privoxy guarantee I am anonymous?</A -></DT -><DT ->4.9. <A -HREF="misc.html#AEN812" ->A test site says I am not using a Proxy.</A -></DT -><DT ->4.10. <A -HREF="misc.html#TOR" ->How do I use Privoxy - together with Tor?</A -></DT -><DT ->4.11. <A -HREF="misc.html#AEN868" ->Might some things break because header information or -content is being altered?</A -></DT -><DT ->4.12. <A -HREF="misc.html#AEN882" ->Can Privoxy act as a <SPAN -CLASS="QUOTE" ->"caching"</SPAN -> proxy to -speed up web browsing?</A -></DT -><DT ->4.13. <A -HREF="misc.html#AEN892" ->What about as a firewall? Can Privoxy protect me?</A -></DT -><DT ->4.14. <A -HREF="misc.html#AEN897" ->I have large empty spaces / a checkerboard pattern now where -ads used to be. Why?</A -></DT -><DT ->4.15. <A -HREF="misc.html#AEN905" ->How can Privoxy filter Secure (HTTPS) URLs?</A -></DT -><DT ->4.16. <A -HREF="misc.html#AEN919" ->Privoxy runs as a <SPAN -CLASS="QUOTE" ->"server"</SPAN ->. How -secure is it? Do I need to take any special precautions?</A -></DT -><DT ->4.17. <A -HREF="misc.html#TURNOFF" ->Can I temporarily disable Privoxy?</A -></DT -><DT ->4.18. <A -HREF="misc.html#REALLYOFF" ->When <SPAN -CLASS="QUOTE" ->"disabled"</SPAN -> is Privoxy totally -out of the picture?</A -></DT -><DT ->4.19. <A -HREF="misc.html#TURNOFF2" ->How can I tell Privoxy to totally ignore certain sites?</A -></DT -><DT ->4.20. <A -HREF="misc.html#CRUNCH" ->My logs show Privoxy <SPAN -CLASS="QUOTE" ->"crunches"</SPAN -> -ads, but also its own internal CGI pages. What is a <SPAN -CLASS="QUOTE" ->"crunch"</SPAN ->?</A -></DT -><DT ->4.21. <A -HREF="misc.html#DOWNLOADS" ->Can Privoxy effect files that I download -from a webserver? FTP server?</A -></DT -><DT ->4.22. <A -HREF="misc.html#DOWNLOADS2" ->I just downloaded a Perl script, and Privoxy -altered it! Yikes, what is wrong!</A -></DT -><DT ->4.23. <A -HREF="misc.html#HOSTSFILE" ->Should I continue to use a <SPAN -CLASS="QUOTE" ->"HOSTS"</SPAN -> file for ad-blocking?</A -></DT -><DT ->4.24. <A -HREF="misc.html#SEEALSO" ->Where can I find more information about Privoxy -and related issues?</A -></DT -><DT ->4.25. <A -HREF="misc.html#MICROSUCK" ->I've noticed that Privoxy changes <SPAN -CLASS="QUOTE" ->"Microsoft"</SPAN -> to -<SPAN -CLASS="QUOTE" ->"MicroSuck"</SPAN ->! Why are you manipulating my browsing?</A -></DT -><DT ->4.26. <A -HREF="misc.html#VALID" ->Does Privoxy produce <SPAN -CLASS="QUOTE" ->"valid"</SPAN -> HTML (or XHTML)?</A -></DT -></DL -></DD -><DT ->5. <A -HREF="trouble.html" ->Troubleshooting</A -></DT -><DD -><DL -><DT ->5.1. <A -HREF="trouble.html#AEN1084" ->I cannot connect to any websites. Or, I am getting -<SPAN -CLASS="QUOTE" ->"connection refused"</SPAN -> message with every web page. Why?</A -></DT -><DT ->5.2. <A -HREF="trouble.html#ERROR503" ->Why am I getting a 503 Error (WSAECONNREFUSED) on every page?</A -></DT -><DT ->5.3. <A -HREF="trouble.html#AEN1107" ->I just added a new rule, but the steenkin ad is -still getting through. How?</A -></DT -><DT ->5.4. <A -HREF="trouble.html#BADSITE" ->One of my favorite sites does not work with Privoxy. -What can I do?</A -></DT -><DT ->5.5. <A -HREF="trouble.html#DUN" ->After installing Privoxy, I have to log in -every time I start IE. What gives?</A -></DT -><DT ->5.6. <A -HREF="trouble.html#FTP" ->I cannot connect to any FTP sites. Privoxy - is blocking me.</A -></DT -><DT ->5.7. <A -HREF="trouble.html#MACOSXIE" ->In Mac OS X, I can't configure Microsoft Internet Explorer to use - Privoxy as the HTTP proxy.</A -></DT -><DT ->5.8. <A -HREF="trouble.html#MACOSXUNINSTALL" ->In Mac OS X, I dragged the Privoxy folder to the trash in order to - uninstall it. Now the finder tells me I don't have sufficient privileges to - empty the trash.</A -></DT -><DT ->5.9. <A -HREF="trouble.html#MACOSXIMAGES" ->In Mac OS X Panther (10.3), images often fail to load and/or I - experience random delays in page loading. I'm using - <TT -CLASS="LITERAL" ->localhost</TT -> as my browser's proxy setting.</A -></DT -><DT ->5.10. <A -HREF="trouble.html#BLANKPAGE" ->I get a completely blank page at one site. <SPAN -CLASS="QUOTE" ->"View Source"</SPAN -> - shows only: <SPAN -CLASS="MARKUP" -><html><body></body></html></SPAN ->. Without - Privoxy the page loads fine.</A -></DT -><DT ->5.11. <A -HREF="trouble.html#NOHOSTNAME" ->My logs show many <SPAN -CLASS="QUOTE" ->"Unable to get my own hostname"</SPAN -> lines. -Why?</A -></DT -><DT ->5.12. <A -HREF="trouble.html#INUSE" ->When I try to launch Privoxy, I get an -error message <SPAN -CLASS="QUOTE" ->"port 8118 is already in use"</SPAN -> (or similar wording). -Why?</A -></DT -><DT ->5.13. <A -HREF="trouble.html#DEMORONIZER" ->Pages with UTF-8 fonts are garbled.</A -></DT -><DT ->5.14. <A -HREF="trouble.html#DEMORONIZER2" ->Why are binary files (such as images) corrupted when Privoxy - is used?</A -></DT -><DT ->5.15. <A -HREF="trouble.html#DEMORONIZER3" ->What is the <SPAN -CLASS="QUOTE" ->"demoronizer"</SPAN -> and why is it there?</A -></DT -><DT ->5.16. <A -HREF="trouble.html#WINDOWOPEN" ->Why do I keep seeing <SPAN -CLASS="QUOTE" ->"PrivoxyWindowOpen()"</SPAN -> in raw source code?</A -></DT -><DT ->5.17. <A -HREF="trouble.html#DNSERRORS" ->I am getting too many DNS errors like <SPAN -CLASS="QUOTE" ->"404 No Such Domain"</SPAN ->. Why - can't Privoxy do this better?</A -></DT -><DT ->5.18. <A -HREF="trouble.html#ALLCPU" ->At one site Privoxy just hangs, and starts taking - all CPU. Why is this?</A -></DT -><DT ->5.19. <A -HREF="trouble.html#SLOWCRAWL" ->I just installed Privoxy, and all my -browsing has slowed to a crawl. What gives?</A -></DT -><DT ->5.20. <A -HREF="trouble.html#PREVENTCOMP" ->Why do my filters work on some sites but not on others?</A -></DT -><DT ->5.21. <A -HREF="trouble.html#SSL-WARNINGS" ->On some HTTPS sites my browser warns me about unauthenticated content, - the URL bar doesn't get highlighted and the lock symbol appears to be broken. - What's going on?</A -></DT -><DT ->5.22. <A -HREF="trouble.html#SE-LINUX" ->I get selinux error messages. How can I fix this?</A -></DT -><DT ->5.23. <A -HREF="trouble.html#GENTOO-RICERS" ->I compiled <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with Gentoo's portage and it appears to be very slow. Why?</A -></DT -></DL -></DD -><DT ->6. <A -HREF="contact.html" ->Contacting the developers, Bug Reporting and Feature Requests</A -></DT -><DD -><DL -><DT ->6.1. <A -HREF="contact.html#CONTACT-SUPPORT" ->Get Support</A -></DT -><DT ->6.2. <A -HREF="contact.html#REPORTING" ->Reporting Problems</A -></DT -><DD -><DL -><DT ->6.2.1. <A -HREF="contact.html#CONTACT-ADS" ->Reporting Ads or Other Configuration Problems</A -></DT -><DT ->6.2.2. <A -HREF="contact.html#CONTACT-BUGS" ->Reporting Bugs</A -></DT -></DL -></DD -><DT ->6.3. <A -HREF="contact.html#CONTACT-FEATURE" ->Request New Features</A -></DT -><DT ->6.4. <A -HREF="contact.html#CONTACT-OTHER" ->Other</A -></DT -></DL -></DD -><DT ->7. <A -HREF="copyright.html" ->Privoxy Copyright, License and History</A -></DT -><DD -><DL -><DT ->7.1. <A -HREF="copyright.html#AEN1451" ->License</A -></DT -><DT ->7.2. <A -HREF="copyright.html#AEN1467" ->History</A -></DT -></DL -></DD -></DL -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -> </TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="general.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -> </TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->General Information</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/installation.html b/external/privoxy/doc/webserver/faq/installation.html deleted file mode 100644 index 1e99b30..0000000 --- a/external/privoxy/doc/webserver/faq/installation.html +++ /dev/null @@ -1,569 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Installation</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="General Information" -HREF="general.html"><LINK -REL="NEXT" -TITLE="Configuration" -HREF="configuration.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Frequently Asked Questions</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="general.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="configuration.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="INSTALLATION" ->2. Installation</A -></H1 -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="WHICHBROWSERS" ->2.1. Which browsers are supported by Privoxy?</A -></H3 -><P -> Any browser that can be configured to use a proxy, which - should be virtually all browsers, including - <SPAN -CLASS="APPLICATION" ->Firefox</SPAN ->, <SPAN -CLASS="APPLICATION" ->Internet - Explorer</SPAN ->, <SPAN -CLASS="APPLICATION" ->Opera</SPAN ->, and - <SPAN -CLASS="APPLICATION" ->Safari</SPAN -> among others. - Direct browser support is not an absolute requirement since - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> runs as a separate application and talks - to the browser in the standardized HTTP protocol, just like a web server - does.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="WHICHOS" ->2.2. Which operating systems are supported?</A -></H3 -><P -> At present, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is known to run on - Windows(95, 98, ME, 2000, XP, Vista), GNU/Linux (RedHat, SuSE, Debian, - Fedora, Gentoo, Slackware and others), Mac OSX, OS/2, AmigaOS, FreeBSD, - NetBSD, OpenBSD, Solaris, and various other flavors of Unix.</P -><P -> But any operating system that runs TCP/IP, can conceivably take advantage of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in a networked situation where - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> would run as a server on a LAN gateway. - Then only the <SPAN -CLASS="QUOTE" ->"gateway"</SPAN -> needs to be running one of the above - operating systems.</P -><P -> Source code is freely available, so porting to other operating systems - is always a possibility.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="EMAIL-CLIENT" ->2.3. Can I use Privoxy with my email client?</A -></H3 -><P -> As long as there is some way to set a HTTP proxy for the client, then yes, - any application can be used, whether it is strictly speaking a - <SPAN -CLASS="QUOTE" ->"browser"</SPAN -> or not. Though this may not be the best approach for - dealing with some of the common abuses of HTML in email. See <A -HREF="configuration.html#OUTLOOK" ->How can I configure <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - with <SPAN -CLASS="APPLICATION" ->Outlook</SPAN ->?</A -> below for more on - this. </P -><P -> Be aware that HTML email presents a number of unique security and privacy - related issues, that can require advanced skills to overcome. The developers - recommend using email clients that can be configured to convert HTML to plain - text for these reasons.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="FIRSTSTEP" ->2.4. I just installed Privoxy. Is there anything -special I have to do now?</A -></H3 -><P -> All browsers should be told to use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - as a proxy by specifying the correct proxy address and port number - in the appropriate configuration area for the browser. It's possible - to combine <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with a packet filter to intercept HTTP requests - even if the client isn't explicitly configured to use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, - but where possible, configuring the client is recommended. See - <A -HREF="../user-manual/startup.html" -TARGET="_top" ->the User Manual for more - details</A ->. You should also flush your browser's memory and disk - cache to get rid of any cached junk items, and remove any stored - <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookies</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="LOCALHOST" ->2.5. What is the proxy address of Privoxy?</A -></H3 -><P -> If you set up the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to run on - the computer you browse from (rather than your ISP's server or some - networked computer on a LAN), the proxy will be on <TT -CLASS="LITERAL" ->127.0.0.1</TT -> - (sometimes referred to as <SPAN -CLASS="QUOTE" ->"localhost"</SPAN ->, - which is the special name used by every computer on the Internet to refer - to itself) and the port will be 8118 (unless you used the <A -HREF="../user-manual/config.html#LISTEN-ADDRESS" -TARGET="_top" ->listen-address</A -> - config option to tell <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to run on - a different port). - </P -><P -> When configuring your browser's proxy settings you typically enter - the word <SPAN -CLASS="QUOTE" ->"localhost"</SPAN -> or the IP address <SPAN -CLASS="QUOTE" ->"127.0.0.1"</SPAN -> - in the boxes next to <SPAN -CLASS="QUOTE" ->"HTTP"</SPAN -> and <SPAN -CLASS="QUOTE" ->"Secure"</SPAN -> (HTTPS) and - then the number <SPAN -CLASS="QUOTE" ->"8118"</SPAN -> for <SPAN -CLASS="QUOTE" ->"port"</SPAN ->. - This tells your browser to send all web requests to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - instead of directly to the Internet. - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can also be used to proxy for - a Local Area Network. In this case, your would enter either the IP - address of the LAN host where <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is running, or the equivalent hostname, e.g. <TT -CLASS="LITERAL" ->192.168.1.1</TT ->. - Port assignment would be same as above. Note that - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> doesn't listen on any LAN interfaces by - default. - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> does not currently handle - any other protocols such as FTP, SMTP, IM, IRC, ICQ, etc. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NOTHING" ->2.6. I just installed Privoxy, and nothing is happening. -All the ads are there. What's wrong?</A -></H3 -><P -> Did you configure your browser to use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - as a proxy? It does not sound like it. See above. You might also try flushing - the browser's caches to force a full re-reading of pages. You can verify - that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is running, and your browser - is correctly configured by entering the special URL: - <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->. - - This should take you to a page titled <SPAN -CLASS="QUOTE" ->"This is Privoxy.."</SPAN -> with - access to <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> internal configuration. - If you see this, then you are good to go. If you receive a page saying - <SPAN -CLASS="QUOTE" ->"Privoxy is not running"</SPAN ->, then the browser is not set up to use - your <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> installation. - If you receive anything else (probably nothing at all), it could either - be that the browser is not set up correctly, or that - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is not running at all. Check the <A -HREF="../user-manual/config.html#LOGFILE" -TARGET="_top" ->log file</A ->. For instructions - on starting <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and browser configuration, - see the <A -HREF="http://www.privoxy.org/user-manual/startup.html" -TARGET="_top" ->chapter - on starting <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -></A -> in the - <A -HREF="http://www.privoxy.org/user-manual/" -TARGET="_top" ->User Manual</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NOTUSED" ->2.7. I get a <SPAN -CLASS="QUOTE" ->"Privoxy is not being used"</SPAN -> dummy page although -Privoxy is running and being used.</A -></H3 -><P -> First, make sure that Privoxy is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->really</I -></SPAN -> running and - being used by visiting <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->. You - should see the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> main page. If not, see - the <A -HREF="http://www.privoxy.org/user-manual/startup.html" -TARGET="_top" ->chapter - on starting <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -></A -> in the - <A -HREF="http://www.privoxy.org/user-manual/" -TARGET="_top" ->User Manual</A ->.</P -><P -> Now if <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A -> works for you, but - other parts of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s web interface show - the dummy page, your browser has cached a redirection it encountered before - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> was being used. You need to clear your - browser's cache. Note that shift-reloading the dummy page won't help, since - that'll only refresh the dummy page, not the redirection that lead you there.</P -><P -> The procedure for clearing the cache varies from browser to browser. For - example, <SPAN -CLASS="APPLICATION" ->Mozilla/Netscape</SPAN -> users would click - <SPAN -CLASS="GUIBUTTON" ->Edit</SPAN -> --> <SPAN -CLASS="GUIBUTTON" ->Preferences</SPAN -> --> - <SPAN -CLASS="GUIBUTTON" ->Advanced</SPAN -> --> <SPAN -CLASS="GUIBUTTON" ->Cache</SPAN -> and - then click both <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Clear Memory Cache</SPAN ->"</SPAN -> - and <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Clear Disk Cache</SPAN ->"</SPAN ->. - In some <SPAN -CLASS="APPLICATION" ->Firefox</SPAN -> versions it's - <SPAN -CLASS="GUIBUTTON" ->Tools</SPAN -> --> <SPAN -CLASS="GUIBUTTON" ->Options</SPAN -> --> - <SPAN -CLASS="GUIBUTTON" ->Privacy</SPAN -> --> <SPAN -CLASS="GUIBUTTON" ->Cache</SPAN -> and - then click <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Clear Cache Now</SPAN ->"</SPAN ->. - </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="general.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="configuration.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->General Information</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Configuration</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/misc.html b/external/privoxy/doc/webserver/faq/misc.html deleted file mode 100644 index 174722e..0000000 --- a/external/privoxy/doc/webserver/faq/misc.html +++ /dev/null @@ -1,1745 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Miscellaneous</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Configuration" -HREF="configuration.html"><LINK -REL="NEXT" -TITLE="Troubleshooting" -HREF="trouble.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Frequently Asked Questions</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="configuration.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="trouble.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="MISC" ->4. Miscellaneous</A -></H1 -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN729" ->4.1. How much does Privoxy slow my browsing down? This -has to add extra time to browsing.</A -></H3 -><P -> How much of an impact depends on many things, including the CPU of the host - system, how aggressive the configuration is, which specific actions are being triggered, - the size of the page, the bandwidth of the connection, etc.</P -><P -> Overall, it should not slow you down any in real terms, and may actually help - speed things up since ads, banners and other junk are not typically being - retrieved and displayed. The actual processing time required by - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> itself for each page, is relatively small - in the overall scheme of things, and happens very quickly. This is typically - more than offset by time saved not downloading and rendering ad images and - other junk content (if ad blocking is being used).</P -><P -> <SPAN -CLASS="QUOTE" ->"Filtering"</SPAN -> content via the <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#FILTER" -TARGET="_top" ->filter</A -></TT -> or - <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#DEANIMATE-GIFS" -TARGET="_top" ->deanimate-gifs</A -></TT -> - actions may cause a perceived slowdown, since the entire document - needs to be buffered before displaying. And on very large documents, - filtering may have some measurable impact. How much depends on the page size, - the actual definition of the filter(s), etc. See below. Most other actions - have little to no impact on speed.</P -><P -> Also, when filtering is enabled but zlib support isn't available, compression - is often disabled (see <A -HREF="../user-manual/actions-file.html#PREVENT-COMPRESSION" -TARGET="_top" ->prevent-compression</A ->). - This can have an impact on speed as well, although it's probably smaller than - you might think. Again, the page size, etc. will determine how much of an impact.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="LOADINGTIMES" ->4.2. I notice considerable -delays in page requests. What's wrong?</A -></H3 -><P -> If you use any <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#FILTER" -TARGET="_top" ->filter</A -></TT -> action, - such as filtering banners by size, web-bugs etc, or the <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#DEANIMATE-GIFS" -TARGET="_top" ->deanimate-gifs</A -></TT -> - action, the entire document must be loaded into memory in order for the filtering - mechanism to work, and nothing is sent to the browser during this time.</P -><P -> The loading time typically does not really change much in real numbers, but - the feeling is different, because most browsers are able to start rendering - incomplete content, giving the user a feeling of "it works". This effect is - more noticeable on slower dialup connections. Extremely large documents - may have some impact on the time to load the page where there is filtering - being done. But overall, the difference should be very minimal. If there is a - big impact, then probably some other situation is contributing (like - anti-virus software). - </P -><P -> Filtering is automatically disabled for inappropriate MIME types. But note - that if the web server mis-reports the MIME type, then content that should - not be filtered, could be. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> only knows how - to differentiate filterable content because of the MIME type as reported by - the server, or because of some configuration setting that enables/disables - filtering.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="CONFIGURL" ->4.3. What are "http://config.privoxy.org/" and -"http://p.p/"?</A -></H3 -><P -> <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> is the - address of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s built-in user interface, and - <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A -> is a shortcut for it.</P -><P -> Since <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> sits between your web browser and the Internet, - it can simply intercept requests for these addresses and answer them with its built-in - <SPAN -CLASS="QUOTE" ->"web server"</SPAN ->.</P -><P -> This also makes for a good test for your browser configuration: If entering the - URL <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> - takes you to a page saying <SPAN -CLASS="QUOTE" ->"This is Privoxy ..."</SPAN ->, everything is OK. - If you get a page saying <SPAN -CLASS="QUOTE" ->"Privoxy is not working"</SPAN -> instead, then - your browser didn't use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> for the request, - hence it could not be intercepted, and you have accessed the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->real</I -></SPAN -> - web site at config.privoxy.org.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NEWADS" ->4.4. How can I submit new ads, or report -problems?</A -></H3 -><P ->Please see the <A -HREF="contact.html" ->Contact section</A -> for -various ways to interact with the developers.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NEWADS2" ->4.5. If I do submit missed ads, will -they be included in future updates?</A -></H3 -><P -> Whether such submissions are eventually included in the - <TT -CLASS="FILENAME" ->default.action</TT -> configuration file depends on how - significant the issue is. We of course want to address any potential - problem with major, high-profile sites such as <I -CLASS="CITETITLE" ->Google</I ->, - <I -CLASS="CITETITLE" ->Yahoo</I ->, etc. Any site with global or regional reach, - has a good chance of being a candidate. But at the other end of the spectrum - are any number of smaller, low-profile sites such as for local clubs or - schools. Since their reach and impact are much less, they are best handled by - inclusion in the user's <TT -CLASS="FILENAME" ->user.action</TT ->, and thus would be - unlikely to be included. </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NOONECARES" ->4.6. Why doesn't anyone answer my support -request?</A -></H3 -><P ->Rest assured that it has been read and considered. Why it is not answered, -could be for various reasons, including no one has a good answer for it, no -one has had time to yet investigate it thoroughly, it has been reported -numerous times already, or because not enough information was provided to help -us help you. Your efforts are not wasted, and we do appreciate them.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="IP" ->4.7. How can I hide my IP address?</A -></H3 -><P -> If you run both the browser and <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> locally, you cannot hide your IP - address with <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> or ultimately any other - software alone. The server needs to know your IP address so that it knows - where to send the responses back. </P -><P -> There are many publicly usable "anonymous" proxies out there, which - provide a further level of indirection between you and the web server.</P -><P -> However, these proxies are called "anonymous" because you don't need - to authenticate, not because they would offer any real anonymity. - Most of them will log your IP address and make it available to the - authorities in case you violate the law of the country they run in. In fact - you can't even rule out that some of them only exist to *collect* information - on (those suspicious) people with a more than average preference for privacy.</P -><P -> If you want to hide your IP address from most adversaries, - you should consider chaining <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - with <A -HREF="https://www.torproject.org/" -TARGET="_top" ->Tor</A ->. - The configuration details can be found in - <A -HREF="#TOR" -TARGET="_top" ->How do I use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> together - with <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> section</A -> - just below.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN794" ->4.8. Can Privoxy guarantee I am anonymous?</A -></H3 -><P -> No. Your chances of remaining anonymous are improved, but unless you - <A -HREF="#TOR" -TARGET="_top" ->chain <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with <SPAN -CLASS="APPLICATION" ->Tor</SPAN -></A -> - or a similar proxy and know what you're doing when it comes to configuring - the rest of your system, you should assume that everything you do - on the Web can be traced back to you.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can remove various information about you, - and allows <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->you</I -></SPAN -> more freedom to decide which sites - you can trust, and what details you want to reveal. But it neither - hides your IP address, nor can it guarantee that the rest of the system - behaves correctly. There are several possibilities how a web sites can find - out who you are, even if you are using a strict <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - configuration and chained it with <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->.</P -><P -> Most of <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> privacy-enhancing features can be easily subverted - by an insecure browser configuration, therefore you should use a browser that can - be configured to only execute code from trusted sites, and be careful which sites you trust. - For example there is no point in having <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - modify the User-Agent header, if websites can get all the information they want - through JavaScript, ActiveX, Flash, Java etc.</P -><P -> A few browsers disclose the user's email address in certain situations, such - as when transferring a file by FTP. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - does not filter FTP. If you need this feature, or are concerned about the - mail handler of your browser disclosing your email address, you might - consider products such as <SPAN -CLASS="APPLICATION" ->NSClean</SPAN ->.</P -><P -> Browsers available only as binaries could use non-standard headers to give - out any information they can have access to: see the manufacturer's license - agreement. It's impossible to anticipate and prevent every breach of privacy - that might occur. The professionally paranoid prefer browsers available as - source code, because anticipating their behavior is easier. Trust the source, - Luke!</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN812" ->4.9. A test site says I am not using a Proxy.</A -></H3 -><P -> Good! Actually, they are probably testing for some other kinds of proxies. - Hiding yourself completely would require additional steps.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="TOR" ->4.10. How do I use Privoxy - together with Tor?</A -></H3 -><P -> Before you configure <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to use - <A -HREF="https://www.torproject.org/" -TARGET="_top" ->Tor</A ->, - please follow the <I -CLASS="CITETITLE" ->User Manual</I -> chapters - <A -HREF="../user-manual/installation.html" -TARGET="_top" ->2. Installation</A -> and - <A -HREF="../user-manual/startup.html" -TARGET="_top" ->5. Startup</A -> to make sure - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> itself is setup correctly.</P -><P -> - If it is, refer to <A -HREF="https://www.torproject.org/documentation.html" -TARGET="_top" ->Tor's - extensive documentation</A -> to learn how to install <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->, - and make sure <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->'s logfile says that - <SPAN -CLASS="QUOTE" ->"Tor has successfully opened a circuit"</SPAN -> and it - <SPAN -CLASS="QUOTE" ->"looks like client functionality is working"</SPAN ->.</P -><P -> If either <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> or <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - isn't working, their combination most likely will neither. Testing them on their - own will also help you to direct problem reports to the right audience. - If <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> isn't working, don't bother the - <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> developers. If <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> - isn't working, don't send bug reports to the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Team.</P -><P -> If you verified that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> - are working, it is time to connect them. As far as <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is concerned, <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> is just another proxy that can be reached - by socks4 or socks4a. Most likely you are interested in <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> - to increase your anonymity level, therefore you should use socks4a, to make sure DNS requests are - done through <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> and thus invisible to your local network.</P -><P -> Since <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.5, its - <A -HREF="../user-manual/config.html" -TARGET="_top" ->main configuration file</A -> - is already prepared for <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->, if you are using a - default <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> configuration and run it on the same - system as <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, you just have to edit the - <A -HREF="../user-manual/config.html#FORWARDING" -TARGET="_top" ->forwarding section</A -> - and uncomment the line:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># forward-socks4a / 127.0.0.1:9050 . - </PRE -></TD -></TR -></TABLE -></P -><P -> This is enough to reach the Internet, but additionally you might want to - uncomment the following forward rules, to make sure your local network is still - reachable through Privoxy:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># forward 192.168.*.*/ . -# forward 10.*.*.*/ . -# forward 127.*.*.*/ . - </PRE -></TD -></TR -></TABLE -></P -><P -> Unencrypted connections to systems in these address ranges will - be as (un)secure as the local network is, but the alternative is - that your browser can't reach the network at all. Then again, - that may actually be desired and if you don't know for sure - that your browser has to be able to reach the local network, - there's no reason to allow it.</P -><P -> If you want your browser to be able to reach servers in your local - network by using their names, you will need additional exceptions - that look like this:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># forward localhost/ . - </PRE -></TD -></TR -></TABLE -></P -><P -> Save the modified configuration file and open - <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status/</A -> - in your browser, confirm that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has reloaded its configuration - and that there are no other forward lines, unless you know that you need them. If everything looks good, - refer to - <A -HREF="https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#IsMyConnectionPri…" -TARGET="_top" ->Tor - Faq 4.2</A -> to learn how to verify that you are really using <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->.</P -><P -> Afterward, please take the time to at least skim through the rest - of <SPAN -CLASS="APPLICATION" ->Tor's</SPAN -> documentation. Make sure you understand - what <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> does, why it is no replacement for - application level security, and why you probably don't want to - use it for unencrypted logins.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN868" ->4.11. Might some things break because header information or -content is being altered?</A -></H3 -><P -> Definitely. It is common for sites to use browser type, browser version, - HTTP header content, and various other techniques in order to dynamically - decide what to display and how to display it. What you see, and what I see, - might be very different. There are many, many ways that this can be handled, - so having hard and fast rules, is tricky.</P -><P -> The <SPAN -CLASS="QUOTE" ->"User-Agent"</SPAN -> is sometimes used in this way to identify - the browser, and adjust content accordingly.</P -><P -> Also, different browsers use different encodings of non-English - characters, certain web servers convert pages on-the-fly according to the - User Agent header. Giving a <SPAN -CLASS="QUOTE" ->"User Agent"</SPAN -> with the wrong - operating system or browser manufacturer causes some sites in these languages - to be garbled; Surfers to Eastern European sites should change it to - something closer. And then some page access counters work by looking at the - <SPAN -CLASS="QUOTE" ->"Referer"</SPAN -> header; they may fail or break if unavailable. The - weather maps of Intellicast have been blocked by their server when no - <SPAN -CLASS="QUOTE" ->"Referer"</SPAN -> or cookie is provided, is another example. (But you - can forge both headers without giving information away). There are - many other ways things can go wrong when trying to fool a web server. The - results of which could inadvertently cause pages to load incorrectly, - partially, or even not at all. And there may be no obvious clues as to just - what went wrong, or why. Nowhere will there be a message that says - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Turn off <TT -CLASS="LITERAL" ->fast-redirects</TT -> or else!</I -></SPAN -> - "</SPAN -></P -><P -> Similar thoughts apply to modifying JavaScript, and, to a lesser degree, - HTML elements.</P -><P -> If you have problems with a site, you will have to adjust your configuration - accordingly. Cookies are probably the most likely adjustment that may - be required, but by no means the only one.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN882" ->4.12. Can Privoxy act as a <SPAN -CLASS="QUOTE" ->"caching"</SPAN -> proxy to -speed up web browsing?</A -></H3 -><P -> No, it does not have this ability at all. You want something like - <A -HREF="http://www.squid-cache.org/" -TARGET="_top" ->Squid</A -> or - <A -HREF="http://www.pps.jussieu.fr/~jch/software/polipo/" -TARGET="_top" ->Polipo</A -> for this. - And, yes, before you ask, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can co-exist - with other kinds of proxies like <SPAN -CLASS="APPLICATION" ->Squid</SPAN ->. - See the <A -HREF="../user-manual/config.html#FORWARDING" -TARGET="_top" ->forwarding - chapter</A -> in the <A -HREF="../user-manual/index.html" -TARGET="_top" ->user - manual</A -> for details.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN892" ->4.13. What about as a firewall? Can Privoxy protect me?</A -></H3 -><P -> Not in the way you mean, or in the way some firewall vendors claim they can. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can help protect your privacy, but can't - protect your system from intrusion attempts. It is, of course, perfectly possible - to use <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN897" ->4.14. I have large empty spaces / a checkerboard pattern now where -ads used to be. Why?</A -></H3 -><P -> It is technically possible to eliminate banners and ads in a way that frees - their allocated page space. This could easily be done by blocking with - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> filters, - and eliminating the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->entire</I -></SPAN -> image references from the - HTML page source. </P -><P -> But, this would consume considerably more CPU resources (IOW, slow things - down), would likely destroy the layout of some web pages which rely on the - banners utilizing a certain amount of page space, and might fail in other - cases, where the screen space is reserved (e.g. by HTML tables for instance). - Also, making ads and banners disappear without any trace complicates - troubleshooting, and would sooner or later be problematic.</P -><P -> The better alternative is to instead let them stay, and block the resulting - requests for the banners themselves as is now the case. This leaves either - empty space, or the familiar checkerboard pattern.</P -><P -> So the developers won't support this in the default configuration, but you - can of course define appropriate filters yourself to achieve this.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN905" ->4.15. How can Privoxy filter Secure (HTTPS) URLs?</A -></H3 -><P -> Since secure HTTP connections are encrypted SSL sessions between your browser - and the secure site, and are meant to be reliably <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->secure</I -></SPAN ->, - there is little that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can do but hand the raw - gibberish data though from one end to the other unprocessed.</P -><P -> The only exception to this is blocking by host patterns, as the client needs - to tell <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> the name of the remote server, - so that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can establish the connection. - If that name matches a host-only pattern, the connection will be blocked.</P -><P -> As far as ad blocking is concerned, this is less of a restriction than it may - seem, since ad sources are often identifiable by the host name, and often - the banners to be placed in an encrypted page come unencrypted nonetheless - for efficiency reasons, which exposes them to the full power of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s ad blocking.</P -><P -> <SPAN -CLASS="QUOTE" ->"Content cookies"</SPAN -> (those that are embedded in the actual HTML or - JS page content, see <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#FILTER-CONTENT-COOKIES" -TARGET="_top" ->filter{content-cookies}</A -></TT ->), - in an SSL transaction will be impossible to block under these conditions. - Fortunately, this does not seem to be a very common scenario since most - cookies come by traditional means.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN919" ->4.16. Privoxy runs as a <SPAN -CLASS="QUOTE" ->"server"</SPAN ->. How -secure is it? Do I need to take any special precautions?</A -></H3 -><P -> On Unix-like systems, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can run as a non-privileged - user, which is how we recommend it be run. Also, by default - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> listens to requests from <SPAN -CLASS="QUOTE" ->"localhost"</SPAN -> - only.</P -><P -> The server aspect of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is not itself directly - exposed to the Internet in this configuration. If you want to have - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> serve as a LAN proxy, this will have to - be opened up to allow for LAN requests. In this case, we'd recommend - you specify only the LAN gateway address, e.g. 192.168.1.1, in the main - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> configuration file and check all <A -HREF="../user-manual/config.html#ACCESS-CONTROL" -TARGET="_top" ->access control and security - options</A ->. All LAN hosts can then use this as their proxy address - in the browser proxy configuration, but <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - will not listen on any external interfaces. ACLs can be defined in addition, - and using a firewall is always good too. Better safe than sorry.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="TURNOFF" ->4.17. Can I temporarily disable Privoxy?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> doesn't have a transparent proxy mode, - but you can toggle off blocking and content filtering.</P -><P -> The easiest way to do that is to point your browser - to the remote toggle URL: <A -HREF="http://config.privoxy.org/toggle" -TARGET="_top" ->http://config.privoxy.org/toggle</A ->.</P -><P -> See the <A -HREF="../user-manual/appendix.html#BOOKMARKLETS" -TARGET="_top" ->Bookmarklets section</A -> - of the <I -CLASS="CITETITLE" ->User Manual</I -> for an easy way to access this - feature. Note that this is a feature that may need to be enabled in the main - <TT -CLASS="FILENAME" ->config</TT -> file.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="REALLYOFF" ->4.18. When <SPAN -CLASS="QUOTE" ->"disabled"</SPAN -> is Privoxy totally -out of the picture?</A -></H3 -><P -> No, this just means all optional filtering and actions are disabled. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is still acting as a proxy, but just - doing less of the things that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> would - normally be expected to do. It is still a <SPAN -CLASS="QUOTE" ->"middle-man"</SPAN -> in - the interaction between your browser and web sites. See below to bypass - the proxy.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="TURNOFF2" ->4.19. How can I tell Privoxy to totally ignore certain sites?</A -></H3 -><P -> Bypassing a proxy, or proxying based on arbitrary criteria, is purely a browser - configuration issue, not a <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> issue. Modern browsers typically do have - settings for not proxying certain sites. Check your browser's help files.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="CRUNCH" ->4.20. My logs show Privoxy <SPAN -CLASS="QUOTE" ->"crunches"</SPAN -> -ads, but also its own internal CGI pages. What is a <SPAN -CLASS="QUOTE" ->"crunch"</SPAN ->?</A -></H3 -><P -> A <SPAN -CLASS="QUOTE" ->"crunch"</SPAN -> simply means <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> intercepted - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->something</I -></SPAN ->, nothing more. Often this is indeed ads or - banners, but <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> uses the same mechanism for - trapping requests for its own internal pages. For instance, a request for - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> configuration page at: <A -HREF="http://config.privoxy.org" -TARGET="_top" ->http://config.privoxy.org</A ->, is - intercepted (i.e. it does not go out to the 'net), and the familiar CGI - configuration is returned to the browser, and the log consequently will show - a <SPAN -CLASS="QUOTE" ->"crunch"</SPAN ->.</P -><P -> Since version 3.0.7, Privoxy will also log the crunch reason. - If you are using an older version you might want to upgrade.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DOWNLOADS" ->4.21. Can Privoxy effect files that I download -from a webserver? FTP server?</A -></H3 -><P -> From the webserver's perspective, there is no difference between - viewing a document (i.e. a page), and downloading a file. The same is true of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. If there is a match for a <TT -CLASS="LITERAL" -><A -HREF="../user-manual/actions-file.html#BLOCK" -TARGET="_top" ->block</A -></TT -> pattern, - it will still be blocked, and of course this is obvious. - </P -><P -> Filtering is potentially more of a concern since the results are not always - so obvious, and the effects of filtering are there whether the file is simply - viewed, or downloaded. And potentially whether the content is some obnoxious - advertisement, or Mr. Jimmy's latest/greatest source code jewel. Of course, - one of these presumably is <SPAN -CLASS="QUOTE" ->"bad"</SPAN -> content that we don't want, and - the other is <SPAN -CLASS="QUOTE" ->"good"</SPAN -> content that we do want. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is blind to the differences, and can only - distinguish <SPAN -CLASS="QUOTE" ->"good from bad"</SPAN -> by the configuration parameters - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->we</I -></SPAN -> give it.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> knows the differences in files according - to the <SPAN -CLASS="QUOTE" ->"Content Type"</SPAN -> as reported by the webserver. If this is - reported accurately (e.g. <SPAN -CLASS="QUOTE" ->"application/zip"</SPAN -> for a zip archive), - then <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> knows to ignore these where - appropriate. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> potentially can filter HTML - as well as plain text documents, subject to configuration parameters of - course. Also, documents that are of an unknown type (generally assumed to be - <SPAN -CLASS="QUOTE" ->"text/plain"</SPAN ->) can be filtered, as will those that might be - incorrectly reported by the webserver. If such a file is a downloaded file - that is intended to be saved to disk, then any content that might have been - altered by filtering, will be saved too, for these (probably rare) cases.</P -><P -> Note that versions later than 3.0.2 do NOT filter document types reported as - <SPAN -CLASS="QUOTE" ->"text/plain"</SPAN ->. Prior to this, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - did filter this document type.</P -><P -> In short, filtering is <SPAN -CLASS="QUOTE" ->"ON"</SPAN -> if a) the content type as reported - by the webserver is appropriate <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and</I -></SPAN -> b) the configuration - allows it (or at least does not disallow it). That's it. There is no magic - cookie anywhere to say this is <SPAN -CLASS="QUOTE" ->"good"</SPAN -> and this is - <SPAN -CLASS="QUOTE" ->"bad"</SPAN ->. It's the configuration that lets it all happen or not.</P -><P -> If you download text files, you probably do not want these to be filtered, - particularly if the content is source code, or other critical content. Source - code sometimes might be mistaken for Javascript (i.e. the kind that might - open a pop-up window). It is recommended to turn off filtering for download - sites (particularly if the content may be plain text files and you are using - version 3.0.2 or earlier) in your <TT -CLASS="FILENAME" ->user.action</TT -> file. And - also, for any site or page where making <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->any</I -></SPAN -> changes at - all to the content is to be avoided.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> does not do FTP at all, only HTTP - and HTTPS (SSL) protocols.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DOWNLOADS2" ->4.22. I just downloaded a Perl script, and Privoxy -altered it! Yikes, what is wrong!</A -></H3 -><P -> Please read above.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="HOSTSFILE" ->4.23. Should I continue to use a <SPAN -CLASS="QUOTE" ->"HOSTS"</SPAN -> file for ad-blocking?</A -></H3 -><P -> One time-tested technique to defeat common ads is to trick the local DNS - system by giving a phony IP address for the ad generator in the local - <TT -CLASS="FILENAME" ->HOSTS</TT -> file, typically using <TT -CLASS="LITERAL" ->127.0.0.1</TT ->, aka - <TT -CLASS="LITERAL" ->localhost</TT ->. This effectively blocks the ad.</P -><P -> There is no reason to use this technique in conjunction with - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - does essentially the same thing, much more elegantly and with much more - flexibility. A large <TT -CLASS="FILENAME" ->HOSTS</TT -> file, in fact, not only - duplicates effort, but may get in the way and seriously slow down your system. - It is recommended to remove such entries from your <TT -CLASS="FILENAME" ->HOSTS</TT -> file. If you think - your hosts list is neglected by <SPAN -CLASS="APPLICATION" ->Privoxy's </SPAN -> - configuration, consider adding your list to your <TT -CLASS="FILENAME" ->user.action</TT -> file:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { +block } - www.ad.example1.com - ad.example2.com - ads.galore.example.com - etc.example.com</PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="SEEALSO" ->4.24. Where can I find more information about Privoxy -and related issues?</A -></H3 -><P -> Other references and sites of interest to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - users:</P -><P -> <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->http://www.privoxy.org/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Home page. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/faq/" -TARGET="_top" ->http://www.privoxy.org/faq/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> FAQ. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/developer-manual/" -TARGET="_top" ->http://www.privoxy.org/developer-manual/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developer manual. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://sourceforge.net/projects/ijbswa/" -TARGET="_top" ->https://sourceforge.net/projects/ijbswa/</A ->, - the Project Page for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on - <A -HREF="http://sourceforge.net" -TARGET="_top" ->SourceForge</A ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A ->, - the web-based user interface. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> must be - running for this to work. Shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A -> - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://sourceforge.net/tracker/?group_id=11118&atid=460288" -TARGET="_top" ->https://sourceforge.net/tracker/?group_id=11118&atid=460288</A ->, to submit <SPAN -CLASS="QUOTE" ->"misses"</SPAN -> and other - configuration related suggestions to the developers. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - - - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.junkbusters.com/ht/en/cookies.html" -TARGET="_top" ->http://www.junkbusters.com/ht/en/cookies.html</A ->, - an explanation how cookies are used to track web users. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.junkbusters.com/ijb.html" -TARGET="_top" ->http://www.junkbusters.com/ijb.html</A ->, - the original Internet Junkbuster. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.squid-cache.org/" -TARGET="_top" ->http://www.squid-cache.org/</A ->, a popular - caching proxy, which is often used together with <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.pps.jussieu.fr/~jch/software/polipo/" -TARGET="_top" ->http://www.pps.jussieu.fr/~jch/software/polipo/</A ->, - <SPAN -CLASS="APPLICATION" ->Polipo</SPAN -> is a caching proxy with advanced features - like pipelining, multiplexing and caching of partial instances. In many setups - it can be used as <SPAN -CLASS="APPLICATION" ->Squid</SPAN -> replacement. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://www.torproject.org/" -TARGET="_top" ->https://www.torproject.org/</A ->, - <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> can help anonymize web browsing, - web publishing, instant messaging, IRC, SSH, and other applications. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="MICROSUCK" ->4.25. I've noticed that Privoxy changes <SPAN -CLASS="QUOTE" ->"Microsoft"</SPAN -> to -<SPAN -CLASS="QUOTE" ->"MicroSuck"</SPAN ->! Why are you manipulating my browsing?</A -></H3 -><P -> We're not. The text substitutions that you are seeing are disabled - in the default configuration as shipped. You have either manually - activated the <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->fun</TT ->"</SPAN -> filter which - is clearly labeled <SPAN -CLASS="QUOTE" ->"Text replacements for subversive browsing - fun!"</SPAN -> or you are using an older Privoxy version and have implicitly - activated it by choosing the <SPAN -CLASS="QUOTE" ->"Advanced"</SPAN -> profile in the - web-based editor. Please upgrade.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="VALID" ->4.26. Does Privoxy produce <SPAN -CLASS="QUOTE" ->"valid"</SPAN -> HTML (or XHTML)?</A -></H3 -><P -> Privoxy generates HTML in both its own <SPAN -CLASS="QUOTE" ->"templates"</SPAN ->, and possibly - whenever there are text substitutions via a <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> filter. While this - should always conform to the HTML 4.01 specifications, it has not been - validated against this or any other standard. </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="configuration.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="trouble.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Configuration</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Troubleshooting</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/faq/trouble.html b/external/privoxy/doc/webserver/faq/trouble.html deleted file mode 100644 index 8bc5b70..0000000 --- a/external/privoxy/doc/webserver/faq/trouble.html +++ /dev/null @@ -1,1276 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Troubleshooting</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy Frequently Asked Questions" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Miscellaneous" -HREF="misc.html"><LINK -REL="NEXT" -TITLE="Contacting the developers, Bug Reporting and Feature Requests" -HREF="contact.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy Frequently Asked Questions</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="misc.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="contact.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="TROUBLE" ->5. Troubleshooting</A -></H1 -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN1084" ->5.1. I cannot connect to any websites. Or, I am getting -<SPAN -CLASS="QUOTE" ->"connection refused"</SPAN -> message with every web page. Why?</A -></H3 -><P -> There are several possibilities:</P -><P -><P -></P -><UL -><LI -><P -><SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is not running. Solution: verify - that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is installed correctly, has not crashed, and is indeed running. - Turn on <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> logging, and look at the logs to see what they say.</P -></LI -><LI -><P ->Or your browser is configured for a different port than what - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is using. Solution: verify that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - and your browser are set to the same port (<TT -CLASS="LITERAL" ->listen-address</TT ->).</P -></LI -><LI -><P ->Or if using a forwarding rule, you have a configuration problem or a - problem with a host in the forwarding chain. Solution: temporarily alter your - configuration and take the forwarders out of the equation.</P -></LI -><LI -><P -> Or you have a firewall that is interfering and blocking you. Solution: - try disabling or removing the firewall as a simple test. - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="ERROR503" ->5.2. Why am I getting a 503 Error (WSAECONNREFUSED) on every page?</A -></H3 -><P -> More than likely this is a problem with your TCP/IP networking. ZoneAlarm has - been reported to cause this symptom -- even if not running! The solution is - to either fight the ZA configuration, or uninstall ZoneAlarm, and then find - something better behaved in its place. Other personal firewall type products - may cause similar type problems if not configured correctly. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="AEN1107" ->5.3. I just added a new rule, but the steenkin ad is -still getting through. How?</A -></H3 -><P -> If the ad had been displayed before you added its URL, it will probably be - held in the browser's cache for some time, so it will be displayed without - the need for any request to the server, and <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - will not be involved. Flush the browser's caches, and then try again.</P -><P -> If this doesn't help, you probably have an error in the rule you - applied. Try pasting the full URL of the offending ad into <A -HREF="http://config.privoxy.org/show-url-info" -TARGET="_top" ->http://config.privoxy.org/show-url-info</A -> - and see if it really matches your new rule. Blocking ads is like blocking - spam: a lot of tinkering is required to stay ahead of the game. And - remember you need to block the URL of the ad in question, which may be - entirely different from the site URL itself. Most ads are hosted on different - servers than the main site itself. If you right-click on the ad, you should - be able to get all the relevant information you need. Alternately, you can - find the correct URL by looking at <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> logs - (you may need to enable logging in the main config file if its disabled).</P -><P -> Below is a slightly modified real-life log snippet that originates with one - requested URL: <TT -CLASS="LITERAL" ->www.example.com</TT -> (name of site was changed - for this example, the number of requests is real). You can see in this the - complexity of what goes into making up this one <SPAN -CLASS="QUOTE" ->"page"</SPAN ->. There - are eight different domains involved here, with thirty two separate URLs - requested in all, making up all manner of images, Shockwave Flash, - JavaScript, CSS stylesheets, scripts, and other related content. Some of this - content is obviously <SPAN -CLASS="QUOTE" ->"good"</SPAN -> or <SPAN -CLASS="QUOTE" ->"bad"</SPAN ->, but not all. - Many of the more questionable looking requests, are going to outside domains - that seem to be identifying themselves with suspicious looking names, making - our job a little easier. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has <SPAN -CLASS="QUOTE" ->"crunched"</SPAN -> (meaning caught - and BLOCKED) quite a few items in this example, but perhaps missed a few as well. </P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->Request: www.example.com/ -Request: www.example.com/favicon.ico -Request: img.example.com/main.css -Request: img.example.com/sr.js -Request: example.betamarker.com/example.html -Request: www.lik-sang.com/Banners/bestsellers/skyscraper.php?likref=BSellers -Request: img.example.com/pb.png -Request: www.google-analytics.com/urchin.js crunch! (Blocked) -Request: www.advertising-department.com/ats/switch.ps.php?26856 crunch! (Blocked) -Request: img.example.com/p.gif -Request: www.popuptraffic.com/assign.php?l=example&mode=behind crunch! (Blocked) -Request: www.popuptraffic.com/scripts/popup.php?hid=5c3cf&tmpl=PBa.tmpl crunch! (Blocked) -Request: www.popuptraffic.com/assign.php?l=example crunch! (Blocked) -Request: www.lik-sang.com/Banners/best_sellers/best_sellers.css -Request: www.adtrak.net/adx.js crunch! (Blocked) -Request: img.example.com/hbg.gif -Request: img.example.com/example.jpg -Request: img.example.com/mt.png -Request: img.example.com/mm.png -Request: img.example.com/mb.png -Request: www.popuptraffic.com/scripts/popup.php?hid=a71b91fa5&tmpl=Ua.tmp crunch! (Blocked) -Request: www.example.com/tracker.js -Request: www.lik-sang.com/Banners/best_sellers/lsi_head.gif -Request: www.adtrak.net/adjs.php?n=020548130&what=zone:61 crunch! (Blocked) -Request: www.adtrak.net/adjs.php?n=463594413&what=zone:58&source=Ua crunch! (Blocked) -Request: www.lik-sang.com/Banners/best_sellers/bottomani.swf -Request: mmm.elitemediagroup.net/install.php?allowpop=no&popupmincook=0&allo… crunch! (Blocked) -Request: www.example.com/tracker.js?screen=1400x1050&win=962x693 -Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=61 crunch! (Blocked) -Request: 66.70.21.80/scripts/click.php?hid=5c3cf599a9efd0320d26&si -Request: 66.70.21.80/img/pixel.gif -Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=58&s… crunch! (Blocked) -Request: 66.70.21.80/scripts/click.php?hid=a71b9f6504b0c5681fa5&si=Ua</PRE -></TD -></TR -></TABLE -></P -><P -> Despite 12 out of 32 requests being blocked, the page looked, and seemed to - behave perfectly <SPAN -CLASS="QUOTE" ->"normal"</SPAN -> (minus some ads, of course).</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="BADSITE" ->5.4. One of my favorite sites does not work with Privoxy. -What can I do?</A -></H3 -><P -> First verify that it is indeed a <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> problem, - by toggling off <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> through <A -HREF="http://config.privoxy.org/toggle" -TARGET="_top" ->http://config.privoxy.org/toggle</A -> - (the toggle feature may need to be enabled in the main - <TT -CLASS="FILENAME" ->config</TT ->), - and then shift-reloading the problem page (i.e. holding down the shift key - while clicking reload. Alternatively, flush your browser's disk and memory - caches).</P -><P -> If the problem went away, we know we have a configuration related problem. - Now go to <A -HREF="http://config.privoxy.org/show-url-info" -TARGET="_top" ->http://config.privoxy.org/show-url-info</A -> - and paste the full URL of the page in question into the prompt. See which - actions are being applied to the URL, and which matches in which actions - files are responsible for that. It might be helpful also to look at your logs - for this site too, to see what else might be happening (note: logging may need - to be enabled in the main config file). Many sites are - complex and require a number of related pages to help present their content. - Look at what else might be used by the page in question, and what of that - might be <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->required</I -></SPAN ->. - Now, armed with this information, go to - <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A -> - and select the appropriate actions files for editing. </P -><P -> You can now either look for a section which disables the actions that - you suspect to cause the problem and add a pattern for your site there, - or make up a completely new section for your site. In any case, the recommended - way is to disable only the prime suspect, reload the problem page, and only - if the problem persists, disable more and more actions until you have - identified the culprit. You may or may not want to turn the other actions - on again. Remember to flush your browser's caches in between any such changes!</P -><P -> Alternately, if you are comfortable with a text editor, you can accomplish - the same thing by editing the appropriate actions file. Probably the easiest - way to deal with such problems when editing by hand is to add your - site to a <TT -CLASS="LITERAL" ->{ fragile }</TT -> section in <TT -CLASS="FILENAME" ->user.action</TT ->, - which is an alias that turns off most <SPAN -CLASS="QUOTE" ->"dangerous"</SPAN -> - actions, but is also likely to turn off more actions then needed, and thus lower - your privacy and protection more than necessary, </P -><P -> Troubleshooting actions is discussed in more detail in the <A -HREF="../user-manual/appendix.html#ACTIONSANAT" -TARGET="_top" ->User Manual appendix, - Troubleshooting: the Anatomy of an Action</A ->. - There is also an <A -HREF="../user-manual/actions-file.html#ACT-EXAMPLES" -TARGET="_top" ->actions tutorial</A -> - with general configuration information and examples.</P -><P -> As a last resort, you can always see if your browser has a setting that will - bypass the proxy setting for selective sites. Modern browsers can do this.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DUN" ->5.5. After installing Privoxy, I have to log in -every time I start IE. What gives?</A -></H3 -><P -> This is a quirk that effects the installation of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, in conjunction with Internet Explorer and - Internet Connection Sharing on Windows 2000 and Windows XP. The symptoms may - appear to be corrupted or invalid DUN settings, or passwords.</P -><P -> When setting up an NT based Windows system with - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> you may find that things do not seem to be - doing what you expect. When you set your system up you will probably have set - up Internet Connection Sharing (ICS) with Dial up Networking (DUN) when - logged in with administrator privileges. You will probably have made this DUN - connection available to other accounts that you may have set-up on your - system. E.g. Mum or Dad sets up the system and makes accounts suitably - configured for the kids.</P -><P -> When setting up <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in this environment you - will have to alter the proxy set-up of Internet Explorer (IE) for the - specific DUN connection on which you wish to use - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. When you do this the ICS DUN set-up - becomes user specific. In this instance you will see no difference if you - change the DUN connection under the account used to set-up the connection. - However when you do this from another user you will notice that the DUN - connection changes to make available to "Me only". You will also find that - you have to store the password under each different user!</P -><P -> The reason for this is that each user's set-up for IE is user specific. Each - set-up DUN connection and each LAN connection in IE store the settings for - each user individually. As such this enforces individual configurations - rather than common ones. Hence the first time you use a DUN connection after - re-booting your system it may not perform as you expect, and prompt you for - the password. Just set and save the password again and all should be OK.</P -><P ->[Thanks to Ray Griffith for this submission.]</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="FTP" ->5.6. I cannot connect to any FTP sites. Privoxy - is blocking me.</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> cannot act as a proxy for FTP traffic, - so do not configure your browser to use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - as an FTP proxy. The same is true for <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->any protocol other than HTTP - or HTTPS (SSL)</I -></SPAN ->. - </P -><P -> Most browsers understand FTP as well as HTTP. If you connect to a site, with - a URL like <TT -CLASS="LITERAL" ->ftp://ftp.example.com</TT ->, your browser is making - an FTP connection, and not a HTTP connection. So while your browser may - speak FTP, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> does not, and cannot proxy - such traffic. - </P -><P -> To complicate matters, some systems may have a generic <SPAN -CLASS="QUOTE" ->"proxy"</SPAN -> - setting, which will enable various protocols, including - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN -> HTTP and FTP proxying! So it is possible to - accidentally enable FTP proxying in these cases. And of course, if this - happens, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will indeed cause problems since - it does not know FTP. Newer version will give a sane error - message if a FTP connection is attempted. Just disable the FTP setting - and all will be well again. - </P -><P -> Will <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> ever proxy FTP traffic? Unlikely. - There just is not much reason, and the work to make this happen is more than - it may seem. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="MACOSXIE" ->5.7. In Mac OS X, I can't configure Microsoft Internet Explorer to use - Privoxy as the HTTP proxy.</A -></H3 -><P -> Microsoft Internet Explorer (in versions like 5.1) respects system-wide - network settings. In order to change the HTTP proxy, open System - Preferences, and click on the Network icon. In the settings pane that - comes up, click on the Proxies tab. Ensure the "Web Proxy (HTTP)" checkbox - is checked and enter <TT -CLASS="LITERAL" ->127.0.0.1</TT -> in the entry field. - Enter <TT -CLASS="LITERAL" ->8118</TT -> in the Port field. The next time you start - IE, it should reflect these values. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="MACOSXUNINSTALL" ->5.8. In Mac OS X, I dragged the Privoxy folder to the trash in order to - uninstall it. Now the finder tells me I don't have sufficient privileges to - empty the trash.</A -></H3 -><P -> Note: This ONLY applies to privoxy 3.0.6 and earlier. - </P -><P -> Just dragging the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> folder to the trash is - not enough to delete it. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> supplies an - <SPAN -CLASS="APPLICATION" ->uninstall.command</SPAN -> file that takes care of - these details. Open the trash, drag the <SPAN -CLASS="APPLICATION" ->uninstall.command</SPAN -> - file out of the trash and double-click on it. You will be prompted for - confirmation and the administration password. - </P -><P -> The trash may still appear full after this command; emptying the trash - from the desktop should make it appear empty again. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="MACOSXIMAGES" ->5.9. In Mac OS X Panther (10.3), images often fail to load and/or I - experience random delays in page loading. I'm using - <TT -CLASS="LITERAL" ->localhost</TT -> as my browser's proxy setting.</A -></H3 -><P -> We believe this is due to an IPv6-related bug in Mac OS X, but don't fully - understand the issue yet. In any case, changing the proxy setting to - <TT -CLASS="LITERAL" ->127.0.0.1</TT -> instead of <TT -CLASS="LITERAL" ->localhost</TT -> - works around the problem. - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="BLANKPAGE" ->5.10. I get a completely blank page at one site. <SPAN -CLASS="QUOTE" ->"View Source"</SPAN -> - shows only: <SPAN -CLASS="MARKUP" -><html><body></body></html></SPAN ->. Without - Privoxy the page loads fine.</A -></H3 -><P -> Chances are that the site suffers from a bug in - <A -HREF="http://www.php.net/" -TARGET="_top" -><SPAN -CLASS="APPLICATION" ->PHP</SPAN -></A ->, - which results in empty pages being sent if the client explicitly requests - an uncompressed page, like <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> does. - This bug has been fixed in PHP 4.2.3. - </P -><P -> To find out if this is in fact the source of the problem, try adding - the site to a <TT -CLASS="LITERAL" ->-prevent-compression</TT -> section in - <TT -CLASS="FILENAME" ->user.action</TT ->: - </P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # Make exceptions for ill-behaved sites: - # - {-prevent-compression} - .example.com</PRE -></TD -></TR -></TABLE -><P -> If that works, you may also want to report the problem to the - site's webmasters, telling them to use zlib.output_compression - instead of ob_gzhandler in their PHP applications (workaround) - or upgrade to PHP 4.2.3 or later (fix). - </P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="NOHOSTNAME" ->5.11. My logs show many <SPAN -CLASS="QUOTE" ->"Unable to get my own hostname"</SPAN -> lines. -Why?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> tries to get the hostname of the system - its running on from the IP address of the system interface it is bound to - (from the <TT -CLASS="FILENAME" ->config</TT -> file - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->listen-address</I -></SPAN -> setting). If the system cannot supply - this information, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> logs this condition. </P -><P -> Typically, this would be considered a minor system configuration error. It is - not a fatal error to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> however, but may - result in a much slower response from <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on - some platforms due to DNS timeouts.</P -><P -> This can be caused by a problem with the local <TT -CLASS="FILENAME" ->hosts</TT -> - file. If this file has been changed from the original, try reverting it to - see if that helps. Make sure whatever name(s) are used for the local system, - that they resolve both ways.</P -><P -> You should also be able to work around the problem with the - <A -HREF="../user-manual/config.html#HOSTNAME" -TARGET="_top" ->hostname option</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="INUSE" ->5.12. When I try to launch Privoxy, I get an -error message <SPAN -CLASS="QUOTE" ->"port 8118 is already in use"</SPAN -> (or similar wording). -Why?</A -></H3 -><P -> Port 8118 is <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> default TCP - <SPAN -CLASS="QUOTE" ->"listening"</SPAN -> port. Typically this message would mean that there - is already one instance of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> running, and - your system is actually trying to start a second - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on the same port, which will not work. - (You can have multiple instances but they must be assigned different ports.) - How and why this might happen varies from platform to platform, but you need - to check your installation and start-up procedures.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DEMORONIZER" ->5.13. Pages with UTF-8 fonts are garbled.</A -></H3 -><P -> This is caused by the <SPAN -CLASS="QUOTE" ->"demoronizer"</SPAN -> filter. You should either - upgrade <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, or at least upgrade to the most - recent <TT -CLASS="FILENAME" ->default.action</TT -> file available from <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->SourceForge</A ->. - Or you can simply disable the demoronizer filter.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DEMORONIZER2" ->5.14. Why are binary files (such as images) corrupted when Privoxy - is used?</A -></H3 -><P -> This may also be caused by the <SPAN -CLASS="QUOTE" ->"demoronizer"</SPAN -> filter, - in conjunction with a web server that is misreporting the content type. Binary - files are exempted from <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> filtering - (unless the web server by mistake says the file is something else). Either - upgrade <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, or go to the most recent - <TT -CLASS="FILENAME" ->default.action</TT -> file available from <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->SourceForge</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DEMORONIZER3" ->5.15. What is the <SPAN -CLASS="QUOTE" ->"demoronizer"</SPAN -> and why is it there?</A -></H3 -><P -> The original demoronizer was a Perl script that cleaned up HTML pages which - were created with certain Microsoft products. MS has used proprietary extensions - to standardized font encodings (ISO 8859-1), which has caused problems for pages - that are viewed with non-Microsoft products (and are expecting to see a - standard set of fonts). The demoronizer corrected these errors so the pages - displayed correctly. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> borrowed from this - script, introducing a filter based on the original demoronizer, which in turn could - correct these errors on the fly. </P -><P -> But this is only needed in some situations, and will cause serious problems in some - other situations.</P -><P -> If you are using Microsoft products, you do not need it. If you need to view - pages with UTF-8 characters (such as Cyrillic or Chinese), then it will - cause corruption of the fonts, and thus <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->should not be on</I -></SPAN ->.</P -><P -> On the other hand, if you use non-Microsoft products, and you occasionally - notice weird characters on pages, you might want to try it.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="WINDOWOPEN" ->5.16. Why do I keep seeing <SPAN -CLASS="QUOTE" ->"PrivoxyWindowOpen()"</SPAN -> in raw source code?</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is attempting to disable malicious - <A -HREF="http://en.wikipedia.org/wiki/Javascript" -TARGET="_top" ->Javascript</A -> - in this case, with the <TT -CLASS="LITERAL" ->unsolicited-popups</TT -> - filter. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> cannot tell very well - <SPAN -CLASS="QUOTE" ->"good"</SPAN -> code snippets from <SPAN -CLASS="QUOTE" ->"bad"</SPAN -> code snippets.</P -><P -> If you see this in HTML source, and the page displays without problems, then - this is good, and likely some pop-up window was disabled. If you see this - where it is causing a problem, such as a downloaded program source code file, - then you should set an exception for this site or page such that the - integrity of the page stays in tact by disabling all filtering.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="DNSERRORS" ->5.17. I am getting too many DNS errors like <SPAN -CLASS="QUOTE" ->"404 No Such Domain"</SPAN ->. Why - can't Privoxy do this better?</A -></H3 -><P -> There are potentially several factors here. First of all, the DNS resolution - is done by the underlying operating system -- not - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> itself. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - merely initiates the process and hands it off, and then later reports - whatever the outcome was and tries to give a coherent message if there seems - to be a problem. In some cases, this might otherwise be mitigated by the - browser itself which might try some work-arounds and alternate approaches (e.g - adding <SPAN -CLASS="QUOTE" ->"www."</SPAN -> to the URL).</P -><P -> In other cases, if <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is being chained - with another proxy, this could complicate the issue, and cause undue - delays and timeouts. In the case of a <SPAN -CLASS="QUOTE" ->"socks4a"</SPAN -> proxy, the socks - server handles all the DNS. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> would just be - the <SPAN -CLASS="QUOTE" ->"messenger"</SPAN -> which is reporting whatever problem occurred - downstream, and not the root cause of the error.</P -><P -> In any case, versions newer than 3.0.3 include various improvements to help - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> better handle these cases.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="ALLCPU" ->5.18. At one site Privoxy just hangs, and starts taking - all CPU. Why is this?</A -></H3 -><P -> This is probably a manifestation of the <SPAN -CLASS="QUOTE" ->"100% cpu"</SPAN -> problem that - occurs on pages containing many (thousands upon thousands) of blank lines. The blank lines - are in the raw HTML source of the page, and the browser just ignores them. But the - pattern matching in <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> page filtering - mechanism is trying to match against absurdly long strings and this becomes - very CPU-intensive, taking a long, long time to complete.</P -><P -> Until a better solution comes along, disable filtering on these pages, - particularly the <TT -CLASS="LITERAL" ->js-annoyances</TT -> and - <TT -CLASS="LITERAL" ->unsolicited-popups</TT -> filters. If you run into this problem - with a recent <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version, please send a problem report.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="SLOWCRAWL" ->5.19. I just installed Privoxy, and all my -browsing has slowed to a crawl. What gives?</A -></H3 -><P -> This should not happen, and for the overwhelming number of users world-wide, - it does not happen. I would suspect some inadvertent interaction of software - components such as anti-virus software, spyware protectors, personal - firewalls or similar components. Try disabling (or uninstalling) these one - at a time and see if that helps. Either way, if you are using a - recent <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version, please report the problem.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="PREVENTCOMP" ->5.20. Why do my filters work on some sites but not on others?</A -></H3 -><P -> It's probably due to compression. It is a common practice for web servers to - send their content <SPAN -CLASS="QUOTE" ->"compressed"</SPAN -> in order to speed things up, and - then let the browser <SPAN -CLASS="QUOTE" ->"uncompress"</SPAN -> them. When compiled with zlib support - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can decompress content before filtering, otherwise you may want to enable -<A -HREF="../user-manual/actions-file.html#PREVENT-COMPRESSION" -TARGET="_top" ->prevent-compression</A ->.</P -><P -> As of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.9, zlib support is enabled in the default builds.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="SSL-WARNINGS" ->5.21. On some HTTPS sites my browser warns me about unauthenticated content, - the URL bar doesn't get highlighted and the lock symbol appears to be broken. - What's going on?</A -></H3 -><P -> Probably the browser is requesting ads through HTTPS and <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is blocking the requests. Privoxy's error messages are delivered - unencrypted and while it's obvious for the browser that the HTTPS - request is already blocked by the proxy, some warn about unauthenticated - content anyway.</P -><P -> To work around the problem you can redirect those requests to an invalid - local address instead of blocking them. While the redirects aren't - encrypted either, many browsers don't care. They simply follow the - redirect, fail to reach a server and display an error message instead - of the ad.</P -><P -> To do that, enable logging to figure out which requests get blocked by - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and add the hosts (no path patterns) to a section like this:</P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{+redirect{http://127.0.0.1:0/} -block -limit-connect} -.ivwbox.de:443/</PRE -></TD -></TR -></TABLE -></P -><P -> Additionally you have to configure your browser to contact - <SPAN -CLASS="QUOTE" ->"127.0.0.1:0"</SPAN -> directly (instead of through <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->).</P -><P -> To add a proxy exception in <SPAN -CLASS="APPLICATION" ->Mozilla Firefox</SPAN -> - open the <SPAN -CLASS="QUOTE" ->"Preferences"</SPAN ->, click the <SPAN -CLASS="QUOTE" ->"Settings"</SPAN -> - button located on the <SPAN -CLASS="QUOTE" ->"Network"</SPAN -> tab in the <SPAN -CLASS="QUOTE" ->"Advanced"</SPAN -> - section, and add <SPAN -CLASS="QUOTE" ->"127.0.0.1:0"</SPAN -> in the <SPAN -CLASS="QUOTE" ->"No Proxy for:"</SPAN -> - field.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="SE-LINUX" ->5.22. I get selinux error messages. How can I fix this?</A -></H3 -><P -> Please report the problem to the creator of your selinux policies.</P -><P -> The problem is that some selinux policy writers aren't familiar - with the application they are trying to <SPAN -CLASS="QUOTE" ->"secure"</SPAN -> and - thus create policies that make no sense.</P -><P -> In <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> case the problem usually - is that the policy only allows outgoing connections for certain - destination ports (e.g. 80 and 443). While this may cover the - standard ports, websites occasionally use other ports as well. - This isn't a security problem and therefore <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - default configuration doesn't block these requests.</P -><P -> If you really want to block these ports (and don't be able - to load websites that don't use standard ports), you should - configure Privoxy to block these ports as well, so it doesn't - trigger the selinux warnings.</P -></DIV -><DIV -CLASS="SECT2" -><H3 -CLASS="SECT2" -><A -NAME="GENTOO-RICERS" ->5.23. I compiled <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with Gentoo's portage and it appears to be very slow. Why?</A -></H3 -><P -> Probably you unintentionally compiled <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> without threading support - in which case requests have to be serialized and only one can be served - at the same time.</P -><P -> Check your <SPAN -CLASS="QUOTE" ->"USE"</SPAN -> flags and make sure they include - <SPAN -CLASS="QUOTE" ->"threads"</SPAN ->. If they don't, add the flag and rebuild <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->.</P -><P -> If you compiled <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with threading support (on POSIX-based systems), - the <SPAN -CLASS="QUOTE" ->"Conditional #defines"</SPAN -> section on <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A -> - will list <SPAN -CLASS="QUOTE" ->"FEATURE_PTHREAD"</SPAN -> as <SPAN -CLASS="QUOTE" ->"enabled"</SPAN ->. </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="misc.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="contact.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Miscellaneous</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Contacting the developers, Bug Reporting and Feature Requests</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/images/files-in-use.jpg b/external/privoxy/doc/webserver/images/files-in-use.jpg deleted file mode 100644 index 207b6f7..0000000 Binary files a/external/privoxy/doc/webserver/images/files-in-use.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/images/proxy_setup.jpg b/external/privoxy/doc/webserver/images/proxy_setup.jpg deleted file mode 100644 index 9e80f97..0000000 Binary files a/external/privoxy/doc/webserver/images/proxy_setup.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/index.html b/external/privoxy/doc/webserver/index.html deleted file mode 100644 index 3afc2d9..0000000 --- a/external/privoxy/doc/webserver/index.html +++ /dev/null @@ -1,328 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy - Home Page</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><META -NAME="KEYWORD" -CONTENT="privoxy"><META -NAME="KEYWORD" -CONTENT="HTTP"><META -NAME="KEYWORD" -CONTENT="proxy"><META -NAME="KEYWORD" -CONTENT="privacy"><META -NAME="KEYWORD" -CONTENT="popups"><META -NAME="KEYWORD" -CONTENT="po-ups"><META -NAME="KEYWORD" -CONTENT="HTML"><META -NAME="KEYWORD" -CONTENT="JavaScript"><META -NAME="KEYWORD" -CONTENT="cleaning"><META -NAME="KEYWORD" -CONTENT="blocking"><META -NAME="KEYWORD" -CONTENT="cleaner"><META -NAME="KEYWORD" -CONTENT="blocker"><META -NAME="KEYWORD" -CONTENT="filter"><META -NAME="KEYWORD" -CONTENT="proxy"><META -NAME="KEYWORD" -CONTENT="junk"><META -NAME="KEYWORD" -CONTENT="ad"><META -NAME="KEYWORD" -CONTENT="advertisement"><META -NAME="KEYWORD" -CONTENT="banner"><META -NAME="KEYWORD" -CONTENT="webbugs"><META -NAME="KEYWORD" -CONTENT="web-bugs"><META -NAME="KEYWORD" -CONTENT="werbung"><META -NAME="KEYWORD" -CONTENT="junkbusters"><META -NAME="KEYWORD" -CONTENT="junkbuster"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<meta name="description" content="Privoxy helps users to protect their privacy."> -<meta name="MSSmartTagsPreventParsing" content="TRUE"></HEAD -><BODY -CLASS="ARTICLE" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="ARTICLE" -><DIV -CLASS="TITLEPAGE" -><H1 -CLASS="TITLE" -><A -NAME="AEN2" ->Privoxy - Home Page</A -></H1 -><DIV -><DIV -CLASS="ABSTRACT" -><P -></P -><A -NAME="AEN28" -></A -><P -> Privoxy is a non-caching web proxy with advanced filtering capabilities - for enhancing privacy, modifying web page data and HTTP headers, controlling - access, and removing ads and other obnoxious Internet junk. Privoxy has a - flexible configuration and can be customized to suit individual needs and tastes. - It has application for both stand-alone systems and multi-user networks.</P -><P -> Privoxy is Free Software and licensed under the GPL2.</P -><P -> Privoxy is an associated project of Software in the Public Interest (SPI). - <A -HREF="http://www.privoxy.org/faq/general.html#DONATE" -TARGET="_top" ->Donations are welcome</A ->.</P -><P -> The most recent release is <A -HREF="announce.txt" -TARGET="_top" ->3.0.12 (stable)</A ->. - </P -><P -></P -></DIV -></DIV -><HR></DIV -><DIV -CLASS="SECT1" -><H3 -CLASS="SECT1" -><A -NAME="DOWNLOAD" ->Download</A -></H3 -><P -> <P -></P -><UL -><LI -><P -> <A -HREF="https://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->Download recent releases</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/quickstart.html" -TARGET="_top" ->Quickstart after installation</A -> - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT1" -><HR><H3 -CLASS="SECT1" -><A -NAME="DOCS" ->Documentation</A -></H3 -><P -> <P -></P -><UL -><LI -><P -> <A -HREF="user-manual/index.html" -TARGET="_top" ->User manual</A -> - </P -></LI -><LI -><P -> <A -HREF="faq/index.html" -TARGET="_top" ->Frequently Asked Questions</A -> - </P -></LI -><LI -><P -> <A -HREF="developer-manual/index.html" -TARGET="_top" ->Developer Manual</A -> - </P -></LI -><LI -><P -> <A -HREF="man-page/privoxy-man-page.html" -TARGET="_top" ->Classic Man Page</A -> - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT1" -><HR><H3 -CLASS="SECT1" -><A -NAME="MOREINFO" ->More information</A -></H3 -><P -> <P -></P -><UL -><LI -><P -> <A -HREF="user-manual/contact.html" -TARGET="_top" ->Support & Service</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/copyright.html" -TARGET="_top" ->Copyright, License, History & Authors</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/introduction.html#FEATURES" -TARGET="_top" ->List of (new) Features</A -> - </P -></LI -><LI -><P -> <A -HREF="https://sourceforge.net/projects/ijbswa/" -TARGET="_top" ->The project page</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/seealso.html" -TARGET="_top" ->Related links</A -> - </P -></LI -><LI -><P -> - - <A -HREF="http://privoxy.org/team/index.html" -TARGET="_top" ->Pictures of the Privoxy Team</A -> - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT1" -><HR><H2 -CLASS="SECT1" -><A -NAME="AEN83" -></A -></H2 -><P -><DIV -CLASS="INFORMALTABLE" -><P -></P -><A -NAME="AEN86" -></A -><TABLE -BORDER="0" -FRAME="void" -RULES="all" -WIDTH="100%" -CLASS="CALSTABLE" -><COL -WIDTH="100%" -ALIGN="CENTER" -TITLE="C1"><TBODY -><TR -><TD -ALIGN="CENTER" ->Privoxy is developed on:</TD -></TR -><TR -><TD -ALIGN="CENTER" -> <A -HREF="http://sourceforge.net/" -TARGET="_top" -> <IMG -SRC="http://sourceforge.net/sflogo.php?group_id=11118&type=1&dummy=.gif"> - </A -> - </TD -></TR -></TBODY -></TABLE -><P -></P -></DIV -></P -><P -> <SUB -> Copyright © 2001-2009 by Privoxy Developers - </SUB -></P -></DIV -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/man-page/privoxy-man-page.html b/external/privoxy/doc/webserver/man-page/privoxy-man-page.html deleted file mode 100644 index 91f045d..0000000 --- a/external/privoxy/doc/webserver/man-page/privoxy-man-page.html +++ /dev/null @@ -1,294 +0,0 @@ - -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<HTML><HEAD><TITLE>Man page of PRIVOXY</TITLE> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></HEAD><BODY> -<H1>PRIVOXY</H1> -Section: (1)<BR>Updated: 21 March 2009<BR><A HREF="#index">Index</A> -<HR> - -<A NAME="lbAB"> </A> -<H2>NAME</H2> - -privoxy - Privacy Enhancing Proxy -<A NAME="lbAC"> </A> -<H2>SYNOPSIS</H2> - -<P> -<B>privoxy</B> [<B>--help</B> ] [<B>--version</B> ] [<B>--no-daemon</B> ] [<B>--pidfile </B><I>pidfile</I><B></B> ] [<B>--user </B><I>user[.group]</I><B></B> ] [<B>--chroot</B> ] [<B>--pre-chroot-nslookup </B><I>hostname</I><B></B> ] [<B></B><I>configfile</I><B></B> ] -<P> -<A NAME="lbAD"> </A> -<H2>OPTIONS</H2> - -<P> - -<B>Privoxy</B> may be invoked with the following command line -options: -<DL COMPACT> -<DT><B>--help</B><DD> -Print brief usage info and exit. -<DT><B>--version</B><DD> -Print version info and exit. -<DT><B>--no-daemon</B><DD> -Don't become a daemon, i.e. don't fork and become process group -leader, don't detach from controlling tty, and do all logging there. -<DT><B>--pidfile </B><I>pidfile</I><B></B><DD> -On startup, write the process ID to <I>pidfile</I>. -Delete the <I>pidfile</I> on exit. -Failure to create or delete the <I>pidfile</I> -is non-fatal. If no <B>--pidfile</B> option is given, no PID file will be used. -<DT><B>--user </B><I>user[.group]</I><B></B><DD> -After (optionally) writing the PID file, assume the user ID of -<I>user</I> and the GID of -<I>group</I>, or, if the optional -<I>group</I> was not given, the default group of -<I>user</I>. Exit if the privileges are not -sufficient to do so. -<DT><B>--chroot</B><DD> -Before changing to the user ID given in the --user option, chroot to -that user's home directory, i.e. make the kernel pretend to the -<B>Privoxy</B> process that the directory tree starts -there. If set up carefully, this can limit the impact of possible -vulnerabilities in <B>Privoxy</B> to the files contained in -that hierarchy. -<DT><B>--pre-chroot-nslookup </B><I>hostname</I><B></B><DD> -Initialize the resolver library using <I>hostname</I> -before chroot'ing. On some systems this reduces the number of files -that must be copied into the chroot tree. -</DL> -<P> - -If the <I>configfile</I> is not specified on the command line, -<B>Privoxy</B> will look for a file named -<I>config</I> in the current directory. If no -<I>configfile</I> is found, <B>Privoxy</B> will -fail to start. -<A NAME="lbAE"> </A> -<H2>DESCRIPTION</H2> - -<P> - -Privoxy is a non-caching web proxy with advanced filtering capabilities -for enhancing privacy, modifying web page data and HTTP headers, controlling -access, and removing ads and other obnoxious Internet junk. Privoxy has a -flexible configuration and can be customized to suit individual needs and tastes. -It has application for both stand-alone systems and multi-user networks. -<P> - -Privoxy is Free Software and licensed under the GPL2. -<A NAME="lbAF"> </A> -<H2>INSTALLATION AND USAGE</H2> - -<P> - -Browsers can either be individually configured to use -<B>Privoxy</B> as a HTTP proxy (recommended), -or <B>Privoxy</B> can be combined with a packet -filter to build an intercepting proxy -(see <I>config</I>). The default setting is for -localhost, on port 8118 (configurable in the main config file). To set the -HTTP proxy in Firefox, go through: <B>Tools</B>; -<B>Options</B>; <B>General</B>; -<B>Connection Settings</B>; -<B>Manual Proxy Configuration</B>. -<P> - -For Internet Explorer, go through: <B>Tools</B>; -<B>Internet Properties</B>; <B>Connections</B>; -<B>LAN Settings</B>. -<P> - -The Secure (SSL) Proxy should also be set to the same values, otherwise -https: URLs will not be proxied. Note: <B>Privoxy</B> can only -proxy HTTP and HTTPS traffic. Do not try it with FTP or other protocols. -HTTPS presents some limitations, and not all features will work with HTTPS -connections. -<P> - -For other browsers, check the documentation. -<A NAME="lbAG"> </A> -<H2>CONFIGURATION</H2> - -<P> - -<B>Privoxy</B> can be configured with the various configuration -files. The default configuration files are: <I>config</I>, -<I>default.filter</I>, <I>default.action</I> and -<I>default.action</I>. <I>user.action</I> should -be used for locally defined exceptions to the default rules in -<I>match-all.action</I> and <I>default.action</I>, -and <I>user.filter</I> for locally defined filters. These are -well commented. On Unix and Unix-like systems, these are located in -<I>/etc/privoxy/</I> by default. -<P> - -<B>Privoxy</B> uses the concept of <B>actions</B> -in order to manipulate the data stream between the browser and remote sites. -There are various actions available with specific functions for such things -as blocking web sites, managing cookies, etc. These actions can be invoked -individually or combined, and used against individual URLs, or groups of URLs -that can be defined using wildcards and regular expressions. The result is -that the user has greatly enhanced control and freedom. -<P> - -The actions list (ad blocks, etc) can also be configured with your -web browser at <A HREF="http://config.privoxy.org/">http://config.privoxy.org/</A> -(assuming the configuration allows it). -<B>Privoxy's</B> configuration parameters can also be viewed at -the same page. In addition, <B>Privoxy</B> can be toggled on/off. -This is an internal page, and does not require Internet access. -<P> - -See the <I>User Manual</I> for a detailed -explanation of installation, general usage, all configuration options, new -features and notes on upgrading. -<A NAME="lbAH"> </A> -<H2>FILES</H2> - -<P> -<PRE> - - <I>/usr/sbin/privoxy</I> - <I>/etc/privoxy/config</I> - <I>/etc/privoxy/match-all.action</I> - <I>/etc/privoxy/default.action</I> - <I>/etc/privoxy/user.action</I> - <I>/etc/privoxy/default.filter</I> - <I>/etc/privoxy/user.filter</I> - <I>/etc/privoxy/trust</I> - <I>/etc/privoxy/templates/*</I> - <I>/var/log/privoxy/logfile</I> -</PRE> - -<P> - -Various other files should be included, but may vary depending on platform -and build configuration. Additional documentation should be included in the local -documentation directory. -<A NAME="lbAI"> </A> -<H2>SIGNALS</H2> - -<P> - -<B>Privoxy</B> terminates on the <B>SIGINT</B>, -<B>SIGTERM</B> and <B>SIGABRT</B> signals. Log -rotation scripts may cause a re-opening of the logfile by sending a -<B>SIGHUP</B> to <B>Privoxy</B>. Note that unlike -other daemons, <B>Privoxy</B> does not need to be made aware of -config file changes by <B>SIGHUP</B> -- it will detect them -automatically. -<A NAME="lbAJ"> </A> -<H2>NOTES</H2> - -<P> - -Please see the <I>User Manual</I> on how to contact the -developers, for feature requests, reporting problems, and other questions. -<A NAME="lbAK"> </A> -<H2>SEE ALSO</H2> - -<P> - -Other references and sites of interest to <B>Privoxy</B> -users: -<P> - -<P> -<A HREF="http://www.privoxy.org/">http://www.privoxy.org/,</A> -the <B>Privoxy</B> Home page. -<P> -<A HREF="http://www.privoxy.org/faq/">http://www.privoxy.org/faq/,</A> -the <B>Privoxy</B> FAQ. -<P> -<A HREF="http://www.privoxy.org/developer-manual/">http://www.privoxy.org/developer-manual/,</A> -the <B>Privoxy</B> developer manual. -<P> -<A HREF="https://sourceforge.net/projects/ijbswa/">https://sourceforge.net/projects/ijbswa/,</A> -the Project Page for <B>Privoxy</B> on -SourceForge. -<P> -<A HREF="http://config.privoxy.org/">http://config.privoxy.org/,</A> -the web-based user interface. <B>Privoxy</B> must be -running for this to work. Shortcut: <A HREF="http://p.p/">http://p.p/</A> -<P> -<A HREF="https://sourceforge.net/tracker/?group_id=11118">https://sourceforge.net/tracker/?group_id=11118</A>&atid=460288, to submit ``misses'' and other -configuration related suggestions to the developers. -<A NAME="lbAL"> </A> -<H2>DEVELOPMENT TEAM</H2> - -<P> -<PRE> - Fabian Keil, lead developer - David Schmidt, developer - - Hal Burgiss - Mark Miller - Gerry Murphy - Lee Rian - Roland Rosenfeld - Jörg Strohmayer -</PRE> - -<A NAME="lbAM"> </A> -<H2>COPYRIGHT AND LICENSE</H2> - -<A NAME="lbAN"> </A> -<H3>COPYRIGHT</H3> - -<P> - -Copyright (C) 2001-2009 by Privoxy Developers <<A HREF="mailto:ijbswa-developers@lists.sourceforge.net">ijbswa-developers(a)lists.sourceforge.net</A>> -<P> - -Some source code is based on code Copyright (C) 1997 by Anonymous Coders -and Junkbusters, Inc. and licensed under the <I>GNU General Public -License</I>. -<A NAME="lbAO"> </A> -<H3>LICENSE</H3> - -<P> - -<B>Privoxy</B> is free software; you can -redistribute it and/or modify it under the terms of the -<I>GNU General Public License</I>, version 2, -as published by the Free Software Foundation. -<P> - -This program is distributed in the hope that it will be useful, but WITHOUT -ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the <I>GNU General Public License</I> for details. -<P> - -You should have received a copy of the <I>GNU GPL</I> -along with this program; if not, write to the Free Software -Foundation, Inc. 51 Franklin Street, Fifth Floor -Boston, MA 02110-1301 -USA -<P> - -<HR> -<A NAME="index"> </A><H2>Index</H2> -<DL> -<DT><A HREF="#lbAB">NAME</A><DD> -<DT><A HREF="#lbAC">SYNOPSIS</A><DD> -<DT><A HREF="#lbAD">OPTIONS</A><DD> -<DT><A HREF="#lbAE">DESCRIPTION</A><DD> -<DT><A HREF="#lbAF">INSTALLATION AND USAGE</A><DD> -<DT><A HREF="#lbAG">CONFIGURATION</A><DD> -<DT><A HREF="#lbAH">FILES</A><DD> -<DT><A HREF="#lbAI">SIGNALS</A><DD> -<DT><A HREF="#lbAJ">NOTES</A><DD> -<DT><A HREF="#lbAK">SEE ALSO</A><DD> -<DT><A HREF="#lbAL">DEVELOPMENT TEAM</A><DD> -<DT><A HREF="#lbAM">COPYRIGHT AND LICENSE</A><DD> -<DL> -<DT><A HREF="#lbAN">COPYRIGHT</A><DD> -<DT><A HREF="#lbAO">LICENSE</A><DD> -</DL> -</DL> -<HR> -This document was created by -man2html, -using the manual pages.<BR> -Time: 11:32:52 GMT, March 21, 2009 -</BODY> -</HTML> diff --git a/external/privoxy/doc/webserver/p_doc.css b/external/privoxy/doc/webserver/p_doc.css deleted file mode 100644 index 212610d..0000000 --- a/external/privoxy/doc/webserver/p_doc.css +++ /dev/null @@ -1,66 +0,0 @@ -/* - * CSS for Privoxy documentation - * - * $Id: p_doc.css,v 1.5 2006/09/09 19:13:42 hal9 Exp $ - */ - -/* - * Global fonts, colors, margins: - */ -body,td,th { font-family: arial, helvetica, sans-serif; } -body { margin: 4%; color: #000000; background-color: #eeeeee; } - -/* - * Headings hierarchy in terms of size and color: - */ -h1 { color: #4c000f; font-size: 160%; } -h2 { color: #660014; font-size: 140%; } -h3 { color: #820019; font-size: 120%; } -h4 { color: #99001d; font-size: 110%; } - -/* - * Make headings stand out: - * Indent all content in chapters, by additional 2%, - * and then pull the headings back left. - */ -div.sect1 { margin-left: 2%; } -h1,h2,h3,h4 {margin-left: -2%; } -h1.title { margin-left: 0; } -h2.subtitle { margin-left: 0; } - -/* - * Underlined links disturb the examples; - * Let them get darker instead of purple after visited. - */ -a { text-decoration: none; } -a:link { color: #0c29ff; } -a:visited { color: #071899; } - -/* - * Special highlighting: - * Code examples in embedded in the text flow become half-bold, - * Emphasis gets h4-red. - * Warnings get the same bg as in privoxy.css - */ -tt.literal { font-weight: 600; } -i.emphasis { color: #99001d; } -table.warning { border: 0; background-color: #ffdddd;} -span.guibutton { - white-space: nowrap; - width: auto; - padding: 2px; - background-color: #dddddd; - color: #000000; - text-decoration: none; - border-top: 1px solid #ffffff; - border-left: 1px solid #ffffff; - border-bottom: 1px solid #000000; - border-right: 1px solid #000000; -} - -/* - * Misc: - */ -ul { list-style-type: square; } -/* Privoxy, of course */ -.application {font-weight: bold; font-size:105%; color: #99001d;} diff --git a/external/privoxy/doc/webserver/p_feedback.css b/external/privoxy/doc/webserver/p_feedback.css deleted file mode 100644 index e0b70a7..0000000 --- a/external/privoxy/doc/webserver/p_feedback.css +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Vary the gereneral Privoxy Stlyesheet to - * meet the needs of small popups: - * - * $Id: p_feedback.css,v 1.4 2002/04/09 13:03:42 oes Exp $ - */ -body,td,th { font-size:10px; } -div.info { width: 60%; } -div.warning { width: 60%; text-align: left; } diff --git a/external/privoxy/doc/webserver/privoxy-index.html b/external/privoxy/doc/webserver/privoxy-index.html deleted file mode 100644 index 22cec35..0000000 --- a/external/privoxy/doc/webserver/privoxy-index.html +++ /dev/null @@ -1,283 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy - The Privacy Enhancing Proxy</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><META -NAME="KEYWORD" -CONTENT="privoxy"><META -NAME="KEYWORD" -CONTENT="HTTP"><META -NAME="KEYWORD" -CONTENT="proxy"><META -NAME="KEYWORD" -CONTENT="privacy"><META -NAME="KEYWORD" -CONTENT="popups"><META -NAME="KEYWORD" -CONTENT="po-ups"><META -NAME="KEYWORD" -CONTENT="HTML"><META -NAME="KEYWORD" -CONTENT="JavaScript"><META -NAME="KEYWORD" -CONTENT="cleaning"><META -NAME="KEYWORD" -CONTENT="blocking"><META -NAME="KEYWORD" -CONTENT="cleaner"><META -NAME="KEYWORD" -CONTENT="blocker"><META -NAME="KEYWORD" -CONTENT="filter"><META -NAME="KEYWORD" -CONTENT="proxy"><META -NAME="KEYWORD" -CONTENT="junk"><META -NAME="KEYWORD" -CONTENT="ad"><META -NAME="KEYWORD" -CONTENT="advertisement"><META -NAME="KEYWORD" -CONTENT="banner"><META -NAME="KEYWORD" -CONTENT="webbugs"><META -NAME="KEYWORD" -CONTENT="web-bugs"><META -NAME="KEYWORD" -CONTENT="werbung"><META -NAME="KEYWORD" -CONTENT="junkbusters"><META -NAME="KEYWORD" -CONTENT="junkbuster"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<meta name="description" content="Privoxy helps users to protect their privacy."> -<meta name="MSSmartTagsPreventParsing" content="TRUE"></HEAD -><BODY -CLASS="ARTICLE" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="ARTICLE" -><DIV -CLASS="TITLEPAGE" -><H1 -CLASS="TITLE" -><A -NAME="AEN2" ->Privoxy - The Privacy Enhancing Proxy</A -></H1 -><H2 -CLASS="SUBTITLE" ->Project Index Page v3.0.12</H2 -><DIV -><DIV -CLASS="ABSTRACT" -><P -></P -><A -NAME="AEN29" -></A -><P -> Privoxy is a non-caching web proxy with advanced filtering capabilities - for enhancing privacy, modifying web page data and HTTP headers, controlling - access, and removing ads and other obnoxious Internet junk. Privoxy has a - flexible configuration and can be customized to suit individual needs and tastes. - It has application for both stand-alone systems and multi-user networks.</P -><P -> Privoxy is Free Software and licensed under the GPL2.</P -><P -> Privoxy is an associated project of Software in the Public Interest (SPI). - <A -HREF="http://www.privoxy.org/faq/general.html#DONATE" -TARGET="_top" ->Donations are welcome</A ->.</P -><P -></P -></DIV -></DIV -><HR></DIV -><DIV -CLASS="SECT1" -><H3 -CLASS="SECT1" -><A -NAME="DOWNLOAD" ->Download</A -></H3 -><P -> <P -></P -><UL -><LI -><P -> <A -HREF="https://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->Download recent releases</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/quickstart.html" -TARGET="_top" ->Quickstart after installation</A -> - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT1" -><HR><H3 -CLASS="SECT1" -><A -NAME="DOCS" ->Documentation</A -></H3 -><P -> <P -></P -><UL -><LI -><P -> <A -HREF="user-manual/index.html" -TARGET="_top" ->User manual</A -> - </P -></LI -><LI -><P -> <A -HREF="faq/index.html" -TARGET="_top" ->Frequently Asked Questions</A -> - </P -></LI -><LI -><P -> <A -HREF="developer-manual/index.html" -TARGET="_top" ->Developer Manual</A -> - </P -></LI -><LI -><P -> <A -HREF="man-page/privoxy-man-page.html" -TARGET="_top" ->Classic Man Page</A -> - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT1" -><HR><H3 -CLASS="SECT1" -><A -NAME="MOREINFO" ->More information</A -></H3 -><P -> <P -></P -><UL -><LI -><P -> <A -HREF="user-manual/contact.html" -TARGET="_top" ->Support & Service</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/copyright.html" -TARGET="_top" ->Copyright, License, History & Authors</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/introduction.html#FEATURES" -TARGET="_top" ->List of (new) Features</A -> - </P -></LI -><LI -><P -> <A -HREF="https://sourceforge.net/projects/ijbswa/" -TARGET="_top" ->The project page</A -> - </P -></LI -><LI -><P -> <A -HREF="user-manual/seealso.html" -TARGET="_top" ->Related links</A -> - </P -></LI -><LI -><P -> - - <A -HREF="http://privoxy.org/team/index.html" -TARGET="_top" ->Pictures of the Privoxy Team</A -> - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="SECT1" -><HR><H2 -CLASS="SECT1" -><A -NAME="AEN82" -></A -></H2 -><P -> <SUB -> Copyright © 2001-2009 by Privoxy Developers - </SUB -></P -></DIV -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/privoxy.css b/external/privoxy/doc/webserver/privoxy.css deleted file mode 100644 index b08cc4d..0000000 --- a/external/privoxy/doc/webserver/privoxy.css +++ /dev/null @@ -1,69 +0,0 @@ -/* - * CSS for Privoxy CGI and script output - * - * $Id: privoxy.css,v 1.2 2002/04/09 11:55:20 oes Exp $ - */ - -/* - * General rules: Font, Color, Headings, Margins, Links - */ -body,td,th { font-family: arial, helvetica, helv, sans-serif; } -body { background-color: #ffffff; color: #000000; } - -h1 { font-size: 140%; margin: 0px; } -h2 { font-size: 120%; margin: 0px; } -h3 { font-size: 110%; margin: 0px; } - -p,pre { margin-left: 15px; } -li { margin: 2px 15px; } -dl { margin: 2px 15px; } - -a:link { color: #0000dd; text-decoration: none; } -a:visited { color: #330099; text-decoration: none; } -a:active { color: #3333ff; text-decoration: none; } - -/* - * Boxen as Table elements: - */ -td.title { border: solid black 1px; background-color: #dddddd; } -td.box { border: solid black 1px; background-color: #eeeeee; } -td.info { border: solid black 1px; background-color: #ccccff; } -td.warning { border: solid black 1px; background-color: #ffdddd; } - -/* - * Special Table Boxen: for nesting, naked container and for - * the Status field in CGI Output: - */ -td.wrapbox { border: solid black 1px; padding: 5px; } -td.container { padding: 0px; } -td.status { border: solid black 1px; background-color: #ff0000; color: #ffffff; font-size: 300%; font-weight: bolder; } - -/* - * Same Boxen as <div>s: - */ -div.title { border: solid black 1px; background-color: #dddddd; margin: 20px; padding: 20px; } -div.box { border: solid black 1px; background-color: #eeeeee; margin: 20px; padding: 20px; } -div.info { border: solid black 1px; background-color: #ccccff; margin: 20px; padding: 20px; } -div.warning { border: solid black 1px; background-color: #ffdddd; margin: 20px; padding: 20px; } -div.wrapbox { border: solid black 1px; margin: 20px; padding: 5px; } - - -/* - * Bold definitions in <dl>s, Grey BG for Table headings - */ -dt { font-weight: bold; } -th { background-color: #dddddd; } - -/* - * Special purpose paragraphs: Small for page footers, - * Important for quoting wrong or dangerous examples, - * Whiteframed for the toggle?mini=y CGI - */ -p.small { font-size: 10px; margin: 0px; } -p.important { border: solid black 1px; background-color: #ffdddd; font-weight: bold; padding: 2px; } -p.whiteframed { margin: 5px; padding: 5px; border: solid black 1px; text-align: center; background-color: #eeeeee; } - -/* - * Special red emphasis: - */ -em.warning { color: #ff0000 } diff --git a/external/privoxy/doc/webserver/robots.txt b/external/privoxy/doc/webserver/robots.txt deleted file mode 100644 index a9941db..0000000 --- a/external/privoxy/doc/webserver/robots.txt +++ /dev/null @@ -1,17 +0,0 @@ -# This is the Privoxy web site. -# -# If the robot is connecting through Privoxy, then the -# control interface is at /config. It isn't very useful -# to index it, and you're likely to break stuff. So go away! -# -# Even if you're not connected through Privoxy, the -# one "Privoxy is not working" page there is not very -# interesting. - -User-agent: * -Disallow: /config/ -Disallow: /actions/ -Disallow: /submit/ - - - diff --git a/external/privoxy/doc/webserver/team/01stefanw.jpg b/external/privoxy/doc/webserver/team/01stefanw.jpg deleted file mode 100644 index 920dece..0000000 Binary files a/external/privoxy/doc/webserver/team/01stefanw.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/01stefanw_t.jpg b/external/privoxy/doc/webserver/team/01stefanw_t.jpg deleted file mode 100644 index 5a90642..0000000 Binary files a/external/privoxy/doc/webserver/team/01stefanw_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/02jon.jpg b/external/privoxy/doc/webserver/team/02jon.jpg deleted file mode 100644 index 136b2dd..0000000 Binary files a/external/privoxy/doc/webserver/team/02jon.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/02jon_t.jpg b/external/privoxy/doc/webserver/team/02jon_t.jpg deleted file mode 100644 index 32e470b..0000000 Binary files a/external/privoxy/doc/webserver/team/02jon_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/03andreas.jpg b/external/privoxy/doc/webserver/team/03andreas.jpg deleted file mode 100644 index 78dc102..0000000 Binary files a/external/privoxy/doc/webserver/team/03andreas.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/03andreas_t.jpg b/external/privoxy/doc/webserver/team/03andreas_t.jpg deleted file mode 100644 index e23f580..0000000 Binary files a/external/privoxy/doc/webserver/team/03andreas_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/04rodney.jpg b/external/privoxy/doc/webserver/team/04rodney.jpg deleted file mode 100644 index bb4e02d..0000000 Binary files a/external/privoxy/doc/webserver/team/04rodney.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/04rodney_t.jpg b/external/privoxy/doc/webserver/team/04rodney_t.jpg deleted file mode 100644 index bba4f15..0000000 Binary files a/external/privoxy/doc/webserver/team/04rodney_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/05david.jpg b/external/privoxy/doc/webserver/team/05david.jpg deleted file mode 100644 index 429723f..0000000 Binary files a/external/privoxy/doc/webserver/team/05david.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/05david_t.jpg b/external/privoxy/doc/webserver/team/05david_t.jpg deleted file mode 100644 index c04aa55..0000000 Binary files a/external/privoxy/doc/webserver/team/05david_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/05member.jpg b/external/privoxy/doc/webserver/team/05member.jpg deleted file mode 100644 index 97042aa..0000000 Binary files a/external/privoxy/doc/webserver/team/05member.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/05member_t.jpg b/external/privoxy/doc/webserver/team/05member_t.jpg deleted file mode 100644 index c9ffd9b..0000000 Binary files a/external/privoxy/doc/webserver/team/05member_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/06member.jpg b/external/privoxy/doc/webserver/team/06member.jpg deleted file mode 100644 index 97042aa..0000000 Binary files a/external/privoxy/doc/webserver/team/06member.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/06member_t.jpg b/external/privoxy/doc/webserver/team/06member_t.jpg deleted file mode 100644 index c9ffd9b..0000000 Binary files a/external/privoxy/doc/webserver/team/06member_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/07member.jpg b/external/privoxy/doc/webserver/team/07member.jpg deleted file mode 100644 index 97042aa..0000000 Binary files a/external/privoxy/doc/webserver/team/07member.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/07member_t.jpg b/external/privoxy/doc/webserver/team/07member_t.jpg deleted file mode 100644 index c9ffd9b..0000000 Binary files a/external/privoxy/doc/webserver/team/07member_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/08member.jpg b/external/privoxy/doc/webserver/team/08member.jpg deleted file mode 100644 index 97042aa..0000000 Binary files a/external/privoxy/doc/webserver/team/08member.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/08member_t.jpg b/external/privoxy/doc/webserver/team/08member_t.jpg deleted file mode 100644 index c9ffd9b..0000000 Binary files a/external/privoxy/doc/webserver/team/08member_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/20member.jpg b/external/privoxy/doc/webserver/team/20member.jpg deleted file mode 100644 index 97042aa..0000000 Binary files a/external/privoxy/doc/webserver/team/20member.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/20member_t.jpg b/external/privoxy/doc/webserver/team/20member_t.jpg deleted file mode 100644 index c9ffd9b..0000000 Binary files a/external/privoxy/doc/webserver/team/20member_t.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/team/index.html b/external/privoxy/doc/webserver/team/index.html deleted file mode 100644 index 2903bcf..0000000 --- a/external/privoxy/doc/webserver/team/index.html +++ /dev/null @@ -1,26 +0,0 @@ -<html> - <head> - <meta http-equiv="Content-Type"content="text/html; charset=iso-8859-1"> - <title>Privoxy - Team Photos</title> - <link rel="stylesheet" type="text/css" href="../p_doc.css"> - </head> - <body> - <h1 style="margin-left: 0%">Privoxy - Team Photos</h1> - <hr> - <p>In our day jobs, we're all models ;-)</p> - <table align="center"> - <tr> - <td><a href="01stefanw.jpg"><img src="01stefanw_t.jpg" width="80" height="80" border="0" title="Stefan Waldherr"></a></td> - <td><a href="02jon.jpg"><img src="02jon_t.jpg" width="80" height="80" border="0" title="Jon Foster"></a></td> - <td><a href="03andreas.jpg"><img src="03andreas_t.jpg" width="80" height="80" border="0" title="Andreas Oesterhelt"></a></td> - <td><a href="04rodney.jpg"><img src="04rodney_t.jpg" width="80" height="80" border="0" title="Rodney Stromlund"></a></td> - </tr> - <tr> - <td><a href="05david.jpg"><img src="05david_t.jpg" width="80" height="80" border="0" title="David Schmidt"></a></td> - <td><a href="06member.jpg"><img src="06member_t.jpg" width="80" height="80" border="0" title="N/A"></a></td> - <td><a href="07member.jpg"><img src="07member_t.jpg" width="80" height="80" border="0" title="N/A"></a></td> - <td><a href="08member.jpg"><img src="08member_t.jpg" width="80" height="80" border="0" title="N/A"></a></td> - </tr> - </table> - </body> -</html> diff --git a/external/privoxy/doc/webserver/user-manual/actions-file.html b/external/privoxy/doc/webserver/user-manual/actions-file.html deleted file mode 100644 index be87aa7..0000000 --- a/external/privoxy/doc/webserver/user-manual/actions-file.html +++ /dev/null @@ -1,8214 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Actions Files</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="The Main Configuration File" -HREF="config.html"><LINK -REL="NEXT" -TITLE="Filter Files" -HREF="filter-file.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="config.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="filter-file.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="ACTIONS-FILE" ->8. Actions Files</A -></H1 -><P -> The actions files are used to define what <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->actions</I -></SPAN -> - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> takes for which URLs, and thus determines - how ad images, cookies and various other aspects of HTTP content and - transactions are handled, and on which sites (or even parts thereof). - There are a number of such actions, with a wide range of functionality. - Each action does something a little different. - These actions give us a veritable arsenal of tools with which to exert - our control, preferences and independence. Actions can be combined so that - their effects are aggregated when applied against a given set of URLs.</P -><P -> There - are three action files included with <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with - differing purposes:</P -><P -> <P -></P -><UL -><LI -><P -> <TT -CLASS="FILENAME" ->match-all.action</TT -> - is used to define which - <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> relating to banner-blocking, images, pop-ups, - content modification, cookie handling etc should be applied by default. - It should be the first actions file loaded - </P -></LI -><LI -><P -> <TT -CLASS="FILENAME" ->default.action</TT -> - defines many exceptions (both - positive and negative) from the default set of actions that's configured - in <TT -CLASS="FILENAME" ->match-all.action</TT ->. It is a set of rules that should - work reasonably well as-is for most users. This file is only supposed to - be edited by the developers. It should be the second actions file loaded. - </P -></LI -><LI -><P -> <TT -CLASS="FILENAME" ->user.action</TT -> - is intended to be for local site - preferences and exceptions. As an example, if your ISP or your bank - has specific requirements, and need special handling, this kind of - thing should go here. This file will not be upgraded. - </P -></LI -><LI -><P -> <SPAN -CLASS="GUIBUTTON" ->Edit</SPAN -> <SPAN -CLASS="GUIBUTTON" ->Set to Cautious</SPAN -> <SPAN -CLASS="GUIBUTTON" ->Set to Medium</SPAN -> <SPAN -CLASS="GUIBUTTON" ->Set to Advanced</SPAN -> - </P -><P -> These have increasing levels of aggressiveness <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and have no - influence on your browsing unless you select them explicitly in the - editor</I -></SPAN ->. A default installation should be pre-set to - <TT -CLASS="LITERAL" ->Cautious</TT ->. New users should try this for a while before - adjusting the settings to more aggressive levels. The more aggressive - the settings, then the more likelihood there is of problems such as sites - not working as they should. - </P -><P -> The <SPAN -CLASS="GUIBUTTON" ->Edit</SPAN -> button allows you to turn each - action on/off individually for fine-tuning. The <SPAN -CLASS="GUIBUTTON" ->Cautious</SPAN -> - button changes the actions list to low/safe settings which will activate - ad blocking and a minimal set of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s features, and subsequently - there will be less of a chance for accidental problems. The - <SPAN -CLASS="GUIBUTTON" ->Medium</SPAN -> button sets the list to a medium level of - other features and a low level set of privacy features. The - <SPAN -CLASS="GUIBUTTON" ->Advanced</SPAN -> button sets the list to a high level of - ad blocking and medium level of privacy. See the chart below. The latter - three buttons over-ride any changes via with the - <SPAN -CLASS="GUIBUTTON" ->Edit</SPAN -> button. More fine-tuning can be done in the - lower sections of this internal page. - </P -><P -> While the actions file editor allows to enable these settings in all - actions files, they are only supposed to be enabled in the first one - to make sure you don't unintentionally overrule earlier rules. - </P -><P -> The default profiles, and their associated actions, as pre-defined in - <TT -CLASS="FILENAME" ->default.action</TT -> are: - </P -><P -> <DIV -CLASS="TABLE" -><A -NAME="AEN2189" -></A -><P -><B ->Table 1. Default Configurations</B -></P -><TABLE -BORDER="1" -FRAME="border" -RULES="all" -CLASS="CALSTABLE" -><COL -WIDTH="1*" -TITLE="C1"><COL -WIDTH="1*" -TITLE="C2"><COL -WIDTH="1*" -TITLE="C3"><COL -WIDTH="1*" -TITLE="C4"><THEAD -><TR -><TH ->Feature</TH -><TH ->Cautious</TH -><TH ->Medium</TH -><TH ->Advanced</TH -></TR -></THEAD -><TBODY -><TR -><TD ->Ad-blocking Aggressiveness</TD -><TD ->medium</TD -><TD ->high</TD -><TD ->high</TD -></TR -><TR -><TD ->Ad-filtering by size</TD -><TD ->no</TD -><TD ->yes</TD -><TD ->yes</TD -></TR -><TR -><TD ->Ad-filtering by link</TD -><TD ->no</TD -><TD ->no</TD -><TD ->yes</TD -></TR -><TR -><TD ->Pop-up killing</TD -><TD ->blocks only</TD -><TD ->blocks only</TD -><TD ->blocks only</TD -></TR -><TR -><TD ->Privacy Features</TD -><TD ->low</TD -><TD ->medium</TD -><TD ->medium/high</TD -></TR -><TR -><TD ->Cookie handling</TD -><TD ->none</TD -><TD ->session-only</TD -><TD ->kill</TD -></TR -><TR -><TD ->Referer forging</TD -><TD ->no</TD -><TD ->yes</TD -><TD ->yes</TD -></TR -><TR -><TD ->GIF de-animation</TD -><TD ->no</TD -><TD ->yes</TD -><TD ->yes</TD -></TR -><TR -><TD ->Fast redirects</TD -><TD ->no</TD -><TD ->no</TD -><TD ->yes</TD -></TR -><TR -><TD ->HTML taming</TD -><TD ->no</TD -><TD ->no</TD -><TD ->yes</TD -></TR -><TR -><TD ->JavaScript taming</TD -><TD ->no</TD -><TD ->no</TD -><TD ->yes</TD -></TR -><TR -><TD ->Web-bug killing</TD -><TD ->no</TD -><TD ->yes</TD -><TD ->yes</TD -></TR -><TR -><TD ->Image tag reordering</TD -><TD ->no</TD -><TD ->yes</TD -><TD ->yes</TD -></TR -></TBODY -></TABLE -></DIV -> - </P -></LI -></UL -></P -><P -> The list of actions files to be used are defined in the main configuration - file, and are processed in the order they are defined (e.g. - <TT -CLASS="FILENAME" ->default.action</TT -> is typically processed before - <TT -CLASS="FILENAME" ->user.action</TT ->). The content of these can all be viewed and - edited from <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A ->. - The over-riding principle when applying actions, is that the last action that - matches a given URL wins. The broadest, most general rules go first - (defined in <TT -CLASS="FILENAME" ->default.action</TT ->), - followed by any exceptions (typically also in - <TT -CLASS="FILENAME" ->default.action</TT ->), which are then followed lastly by any - local preferences (typically in <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->user</I -></SPAN -><TT -CLASS="FILENAME" ->.action</TT ->). - Generally, <TT -CLASS="FILENAME" ->user.action</TT -> has the last word. - </P -><P -> An actions file typically has multiple sections. If you want to use - <SPAN -CLASS="QUOTE" ->"aliases"</SPAN -> in an actions file, you have to place the (optional) - <A -HREF="actions-file.html#ALIASES" ->alias section</A -> at the top of that file. - Then comes the default set of rules which will apply universally to all - sites and pages (be <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->very careful</I -></SPAN -> with using such a - universal set in <TT -CLASS="FILENAME" ->user.action</TT -> or any other actions file after - <TT -CLASS="FILENAME" ->default.action</TT ->, because it will override the result - from consulting any previous file). And then below that, - exceptions to the defined universal policies. You can regard - <TT -CLASS="FILENAME" ->user.action</TT -> as an appendix to <TT -CLASS="FILENAME" ->default.action</TT ->, - with the advantage that it is a separate file, which makes preserving your - personal settings across <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> upgrades easier.</P -><P -> - Actions can be used to block anything you want, including ads, banners, or - just some obnoxious URL whose content you would rather not see. Cookies can be accepted - or rejected, or accepted only during the current browser session (i.e. not - written to disk), content can be modified, some JavaScripts tamed, user-tracking - fooled, and much more. See below for a <A -HREF="actions-file.html#ACTIONS" ->complete list - of actions</A ->.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN2288" ->8.1. Finding the Right Mix</A -></H2 -><P -> Note that some <A -HREF="actions-file.html#ACTIONS" ->actions</A ->, like cookie suppression - or script disabling, may render some sites unusable that rely on these - techniques to work properly. Finding the right mix of actions is not always easy and - certainly a matter of personal taste. And, things can always change, requiring - refinements in the configuration. In general, it can be said that the more - <SPAN -CLASS="QUOTE" ->"aggressive"</SPAN -> your default settings (in the top section of the - actions file) are, the more exceptions for <SPAN -CLASS="QUOTE" ->"trusted"</SPAN -> sites you - will have to make later. If, for example, you want to crunch all cookies per - default, you'll have to make exceptions from that rule for sites that you - regularly use and that require cookies for actually useful purposes, like maybe - your bank, favorite shop, or newspaper.</P -><P -> We have tried to provide you with reasonable rules to start from in the - distribution actions files. But there is no general rule of thumb on these - things. There just are too many variables, and sites are constantly changing. - Sooner or later you will want to change the rules (and read this chapter again :).</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN2295" ->8.2. How to Edit</A -></H2 -><P -> The easiest way to edit the actions files is with a browser by - using our browser-based editor, which can be reached from <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A ->. - Note: the config file option <A -HREF="config.html#ENABLE-EDIT-ACTIONS" ->enable-edit-actions</A -> must be enabled for - this to work. The editor allows both fine-grained control over every single - feature on a per-URL basis, and easy choosing from wholesale sets of defaults - like <SPAN -CLASS="QUOTE" ->"Cautious"</SPAN ->, <SPAN -CLASS="QUOTE" ->"Medium"</SPAN -> or - <SPAN -CLASS="QUOTE" ->"Advanced"</SPAN ->. Warning: the <SPAN -CLASS="QUOTE" ->"Advanced"</SPAN -> setting is more - aggressive, and will be more likely to cause problems for some sites. - Experienced users only! - </P -><P -> If you prefer plain text editing to GUIs, you can of course also directly edit the - the actions files with your favorite text editor. Look at - <TT -CLASS="FILENAME" ->default.action</TT -> which is richly commented with many - good examples.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="ACTIONS-APPLY" ->8.3. How Actions are Applied to Requests</A -></H2 -><P -> Actions files are divided into sections. There are special sections, - like the <SPAN -CLASS="QUOTE" ->"<A -HREF="actions-file.html#ALIASES" ->alias</A ->"</SPAN -> sections which will - be discussed later. For now let's concentrate on regular sections: They have a - heading line (often split up to multiple lines for readability) which consist - of a list of actions, separated by whitespace and enclosed in curly braces. - Below that, there is a list of URL and tag patterns, each on a separate line.</P -><P -> To determine which actions apply to a request, the URL of the request is - compared to all URL patterns in each <SPAN -CLASS="QUOTE" ->"action file"</SPAN ->. - Every time it matches, the list of applicable actions for the request is - incrementally updated, using the heading of the section in which the - pattern is located. The same is done again for tags and tag patterns later on.</P -><P -> If multiple applying sections set the same action differently, - the last match wins. If not, the effects are aggregated. - E.g. a URL might match a regular section with a heading line of <TT -CLASS="LITERAL" ->{ - +<A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -> }</TT ->, - then later another one with just <TT -CLASS="LITERAL" ->{ - +<A -HREF="actions-file.html#BLOCK" ->block</A -> }</TT ->, resulting - in <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN -> actions to apply. And there may well be - cases where you will want to combine actions together. Such a section then - might look like:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { +<TT -CLASS="LITERAL" ->handle-as-image</TT -> +<TT -CLASS="LITERAL" ->block{Banner ads.}</TT -> } - # Block these as if they were images. Send no block page. - banners.example.com - media.example.com/.*banners - .example.com/images/ads/</PRE -></TD -></TR -></TABLE -> - </P -><P -> You can trace this process for URL patterns and any given URL by visiting <A -HREF="http://config.privoxy.org/show-url-info" -TARGET="_top" ->http://config.privoxy.org/show-url-info</A ->.</P -><P -> Examples and more detail on this is provided in the Appendix, <A -HREF="appendix.html#ACTIONSANAT" -> Troubleshooting: Anatomy of an Action</A -> section.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AF-PATTERNS" ->8.4. Patterns</A -></H2 -><P -> - As mentioned, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> uses <SPAN -CLASS="QUOTE" ->"patterns"</SPAN -> - to determine what <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->actions</I -></SPAN -> might apply to which sites and - pages your browser attempts to access. These <SPAN -CLASS="QUOTE" ->"patterns"</SPAN -> use wild - card type <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->pattern</I -></SPAN -> matching to achieve a high degree of - flexibility. This allows one expression to be expanded and potentially match - against many similar patterns.</P -><P -> Generally, an URL pattern has the form - <TT -CLASS="LITERAL" -><domain>/<path></TT ->, where both the - <TT -CLASS="LITERAL" -><domain></TT -> and <TT -CLASS="LITERAL" -><path></TT -> are - optional. (This is why the special <TT -CLASS="LITERAL" ->/</TT -> pattern matches all - URLs). Note that the protocol portion of the URL pattern (e.g. - <TT -CLASS="LITERAL" ->http://</TT ->) should <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not</I -></SPAN -> be included in - the pattern. This is assumed already!</P -><P -> The pattern matching syntax is different for the domain and path parts of - the URL. The domain part uses a simple globbing type matching technique, - while the path part uses more flexible - <A -HREF="http://en.wikipedia.org/wiki/Regular_expressions" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"Regular - Expressions"</SPAN -></A -> (POSIX 1003.2).</P -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT -><TT -CLASS="LITERAL" ->www.example.com/</TT -></DT -><DD -><P -> is a domain-only pattern and will match any request to <TT -CLASS="LITERAL" ->www.example.com</TT ->, - regardless of which document on that server is requested. So ALL pages in - this domain would be covered by the scope of this action. Note that a - simple <TT -CLASS="LITERAL" ->example.com</TT -> is different and would NOT match. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->www.example.com</TT -></DT -><DD -><P -> means exactly the same. For domain-only patterns, the trailing <TT -CLASS="LITERAL" ->/</TT -> may - be omitted. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->www.example.com/index.html</TT -></DT -><DD -><P -> matches all the documents on <TT -CLASS="LITERAL" ->www.example.com</TT -> - whose name starts with <TT -CLASS="LITERAL" ->/index.html</TT ->. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->www.example.com/index.html$</TT -></DT -><DD -><P -> matches only the single document <TT -CLASS="LITERAL" ->/index.html</TT -> - on <TT -CLASS="LITERAL" ->www.example.com</TT ->. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->/index.html$</TT -></DT -><DD -><P -> matches the document <TT -CLASS="LITERAL" ->/index.html</TT ->, regardless of the domain, - i.e. on <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->any</I -></SPAN -> web server anywhere. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->index.html</TT -></DT -><DD -><P -> matches nothing, since it would be interpreted as a domain name and - there is no top-level domain called <TT -CLASS="LITERAL" ->.html</TT ->. So its - a mistake. - </P -></DD -></DL -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="AEN2386" ->8.4.1. The Domain Pattern</A -></H3 -><P -> The matching of the domain part offers some flexible options: if the - domain starts or ends with a dot, it becomes unanchored at that end. - For example:</P -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT -><TT -CLASS="LITERAL" ->.example.com</TT -></DT -><DD -><P -> matches any domain with first-level domain <TT -CLASS="LITERAL" ->com</TT -> - and second-level domain <TT -CLASS="LITERAL" ->example</TT ->. - For example <TT -CLASS="LITERAL" ->www.example.com</TT ->, - <TT -CLASS="LITERAL" ->example.com</TT -> and <TT -CLASS="LITERAL" ->foo.bar.baz.example.com</TT ->. - Note that it wouldn't match if the second-level domain was <TT -CLASS="LITERAL" ->another-example</TT ->. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->www.</TT -></DT -><DD -><P -> matches any domain that <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->STARTS</I -></SPAN -> with - <TT -CLASS="LITERAL" ->www.</TT -> (It also matches the domain - <TT -CLASS="LITERAL" ->www</TT -> but most of the time that doesn't matter.) - </P -></DD -><DT -><TT -CLASS="LITERAL" ->.example.</TT -></DT -><DD -><P -> matches any domain that <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->CONTAINS</I -></SPAN -> <TT -CLASS="LITERAL" ->.example.</TT ->. - And, by the way, also included would be any files or documents that exist - within that domain since no path limitations are specified. (Correctly - speaking: It matches any FQDN that contains <TT -CLASS="LITERAL" ->example</TT -> as - a domain.) This might be <TT -CLASS="LITERAL" ->www.example.com</TT ->, - <TT -CLASS="LITERAL" ->news.example.de</TT ->, or - <TT -CLASS="LITERAL" ->www.example.net/cgi/testing.pl</TT -> for instance. All these - cases are matched. - </P -></DD -></DL -></DIV -><P -> Additionally, there are wild-cards that you can use in the domain names - themselves. These work similarly to shell globbing type wild-cards: - <SPAN -CLASS="QUOTE" ->"*"</SPAN -> represents zero or more arbitrary characters (this is - equivalent to the - <A -HREF="http://en.wikipedia.org/wiki/Regular_expressions" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"Regular - Expression"</SPAN -></A -> based syntax of <SPAN -CLASS="QUOTE" ->".*"</SPAN ->), - <SPAN -CLASS="QUOTE" ->"?"</SPAN -> represents any single character (this is equivalent to the - regular expression syntax of a simple <SPAN -CLASS="QUOTE" ->"."</SPAN ->), and you can define - <SPAN -CLASS="QUOTE" ->"character classes"</SPAN -> in square brackets which is similar to - the same regular expression technique. All of this can be freely mixed:</P -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT -><TT -CLASS="LITERAL" ->ad*.example.com</TT -></DT -><DD -><P -> matches <SPAN -CLASS="QUOTE" ->"adserver.example.com"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"ads.example.com"</SPAN ->, etc but not <SPAN -CLASS="QUOTE" ->"sfads.example.com"</SPAN -> - </P -></DD -><DT -><TT -CLASS="LITERAL" ->*ad*.example.com</TT -></DT -><DD -><P -> matches all of the above, and then some. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->.?pix.com</TT -></DT -><DD -><P -> matches <TT -CLASS="LITERAL" ->www.ipix.com</TT ->, - <TT -CLASS="LITERAL" ->pictures.epix.com</TT ->, <TT -CLASS="LITERAL" ->a.b.c.d.e.upix.com</TT -> etc. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->www[1-9a-ez].example.c*</TT -></DT -><DD -><P -> matches <TT -CLASS="LITERAL" ->www1.example.com</TT ->, - <TT -CLASS="LITERAL" ->www4.example.cc</TT ->, <TT -CLASS="LITERAL" ->wwwd.example.cy</TT ->, - <TT -CLASS="LITERAL" ->wwwz.example.com</TT -> etc., but <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not</I -></SPAN -> - <TT -CLASS="LITERAL" ->wwww.example.com</TT ->. - </P -></DD -></DL -></DIV -><P -> While flexible, this is not the sophistication of full regular expression based syntax.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="AEN2462" ->8.4.2. The Path Pattern</A -></H3 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> uses <SPAN -CLASS="QUOTE" ->"modern"</SPAN -> POSIX 1003.2 - <A -HREF="http://en.wikipedia.org/wiki/Regular_expressions" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"Regular - Expressions"</SPAN -></A -> for matching the path portion (after the slash), - and is thus more flexible.</P -><P -> There is an <A -HREF="appendix.html#REGEX" ->Appendix</A -> with a brief quick-start into regular - expressions, you also might want to have a look at your operating system's documentation - on regular expressions (try <TT -CLASS="LITERAL" ->man re_format</TT ->).</P -><P -> Note that the path pattern is automatically left-anchored at the <SPAN -CLASS="QUOTE" ->"/"</SPAN ->, - i.e. it matches as if it would start with a <SPAN -CLASS="QUOTE" ->"^"</SPAN -> (regular expression speak - for the beginning of a line).</P -><P -> Please also note that matching in the path is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->CASE INSENSITIVE</I -></SPAN -> - by default, but you can switch to case sensitive at any point in the pattern by using the - <SPAN -CLASS="QUOTE" ->"(?-i)"</SPAN -> switch: <TT -CLASS="LITERAL" ->www.example.com/(?-i)PaTtErN.*</TT -> will match - only documents whose path starts with <TT -CLASS="LITERAL" ->PaTtErN</TT -> in - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->exactly</I -></SPAN -> this capitalization.</P -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT -><TT -CLASS="LITERAL" ->.example.com/.*</TT -></DT -><DD -><P -> Is equivalent to just <SPAN -CLASS="QUOTE" ->".example.com"</SPAN ->, since any documents - within that domain are matched with or without the <SPAN -CLASS="QUOTE" ->".*"</SPAN -> - regular expression. This is redundant - </P -></DD -><DT -><TT -CLASS="LITERAL" ->.example.com/.*/index.html$</TT -></DT -><DD -><P -> Will match any page in the domain of <SPAN -CLASS="QUOTE" ->"example.com"</SPAN -> that is - named <SPAN -CLASS="QUOTE" ->"index.html"</SPAN ->, and that is part of some path. For - example, it matches <SPAN -CLASS="QUOTE" ->"www.example.com/testing/index.html"</SPAN -> but - NOT <SPAN -CLASS="QUOTE" ->"www.example.com/index.html"</SPAN -> because the regular - expression called for at least two <SPAN -CLASS="QUOTE" ->"/'s"</SPAN ->, thus the path - requirement. It also would match - <SPAN -CLASS="QUOTE" ->"www.example.com/testing/index_html"</SPAN ->, because of the - special meta-character <SPAN -CLASS="QUOTE" ->"."</SPAN ->. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->.example.com/(.*/)?index\.html$</TT -></DT -><DD -><P -> This regular expression is conditional so it will match any page - named <SPAN -CLASS="QUOTE" ->"index.html"</SPAN -> regardless of path which in this case can - have one or more <SPAN -CLASS="QUOTE" ->"/'s"</SPAN ->. And this one must contain exactly - <SPAN -CLASS="QUOTE" ->".html"</SPAN -> (but does not have to end with that!). - </P -></DD -><DT -><TT -CLASS="LITERAL" ->.example.com/(.*/)(ads|banners?|junk)</TT -></DT -><DD -><P -> This regular expression will match any path of <SPAN -CLASS="QUOTE" ->"example.com"</SPAN -> - that contains any of the words <SPAN -CLASS="QUOTE" ->"ads"</SPAN ->, <SPAN -CLASS="QUOTE" ->"banner"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"banners"</SPAN -> (because of the <SPAN -CLASS="QUOTE" ->"?"</SPAN ->) or <SPAN -CLASS="QUOTE" ->"junk"</SPAN ->. - The path does not have to end in these words, just contain them. - </P -></DD -><DT -><TT -CLASS="LITERAL" ->.example.com/(.*/)(ads|banners?|junk)/.*\.(jpe?g|gif|png)$</TT -></DT -><DD -><P -> This is very much the same as above, except now it must end in either - <SPAN -CLASS="QUOTE" ->".jpg"</SPAN ->, <SPAN -CLASS="QUOTE" ->".jpeg"</SPAN ->, <SPAN -CLASS="QUOTE" ->".gif"</SPAN -> or <SPAN -CLASS="QUOTE" ->".png"</SPAN ->. So this - one is limited to common image formats. - </P -></DD -></DL -></DIV -><P -> There are many, many good examples to be found in <TT -CLASS="FILENAME" ->default.action</TT ->, - and more tutorials below in <A -HREF="appendix.html#REGEX" ->Appendix on regular expressions</A ->.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="TAG-PATTERN" ->8.4.3. The Tag Pattern</A -></H3 -><P -> Tag patterns are used to change the applying actions based on the - request's tags. Tags can be created with either the - <A -HREF="actions-file.html#CLIENT-HEADER-TAGGER" ->client-header-tagger</A -> - or the <A -HREF="actions-file.html#SERVER-HEADER-TAGGER" ->server-header-tagger</A -> action.</P -><P -> Tag patterns have to start with <SPAN -CLASS="QUOTE" ->"TAG:"</SPAN ->, so <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - can tell them apart from URL patterns. Everything after the colon - including white space, is interpreted as a regular expression with - path pattern syntax, except that tag patterns aren't left-anchored - automatically (<SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> doesn't silently add a <SPAN -CLASS="QUOTE" ->"^"</SPAN ->, - you have to do it yourself if you need it).</P -><P -> To match all requests that are tagged with <SPAN -CLASS="QUOTE" ->"foo"</SPAN -> - your pattern line should be <SPAN -CLASS="QUOTE" ->"TAG:^foo$"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"TAG:foo"</SPAN -> would work as well, but it would also - match requests whose tags contain <SPAN -CLASS="QUOTE" ->"foo"</SPAN -> somewhere. - <SPAN -CLASS="QUOTE" ->"TAG: foo"</SPAN -> wouldn't work as it requires white space.</P -><P -> Sections can contain URL and tag patterns at the same time, - but tag patterns are checked after the URL patterns and thus - always overrule them, even if they are located before the URL patterns.</P -><P -> Once a new tag is added, Privoxy checks right away if it's matched by one - of the tag patterns and updates the action settings accordingly. As a result - tags can be used to activate other tagger actions, as long as these other - taggers look for headers that haven't already be parsed.</P -><P -> For example you could tag client requests which use the - <TT -CLASS="LITERAL" ->POST</TT -> method, - then use this tag to activate another tagger that adds a tag if cookies - are sent, and then use a block action based on the cookie tag. This allows - the outcome of one action, to be input into a subsequent action. However if - you'd reverse the position of the described taggers, and activated the - method tagger based on the cookie tagger, no method tags would be created. - The method tagger would look for the request line, but at the time - the cookie tag is created, the request line has already been parsed.</P -><P -> While this is a limitation you should be aware of, this kind of - indirection is seldom needed anyway and even the example doesn't - make too much sense.</P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="ACTIONS" ->8.5. Actions</A -></H2 -><P -> All actions are disabled by default, until they are explicitly enabled - somewhere in an actions file. Actions are turned on if preceded with a - <SPAN -CLASS="QUOTE" ->"+"</SPAN ->, and turned off if preceded with a <SPAN -CLASS="QUOTE" ->"-"</SPAN ->. So a - <TT -CLASS="LITERAL" ->+action</TT -> means <SPAN -CLASS="QUOTE" ->"do that action"</SPAN ->, e.g. - <TT -CLASS="LITERAL" ->+block</TT -> means <SPAN -CLASS="QUOTE" ->"please block URLs that match the - following patterns"</SPAN ->, and <TT -CLASS="LITERAL" ->-block</TT -> means <SPAN -CLASS="QUOTE" ->"don't - block URLs that match the following patterns, even if <TT -CLASS="LITERAL" ->+block</TT -> - previously applied."</SPAN -></P -><P -> - Again, actions are invoked by placing them on a line, enclosed in curly braces and - separated by whitespace, like in - <TT -CLASS="LITERAL" ->{+some-action -some-other-action{some-parameter}}</TT ->, - followed by a list of URL patterns, one per line, to which they apply. - Together, the actions line and the following pattern lines make up a section - of the actions file. </P -><P -> - Actions fall into three categories:</P -><P -> <P -></P -><UL -><LI -><P -> - Boolean, i.e the action can only be <SPAN -CLASS="QUOTE" ->"enabled"</SPAN -> or - <SPAN -CLASS="QUOTE" ->"disabled"</SPAN ->. Syntax: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> +<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT -> # enable action <TT -CLASS="REPLACEABLE" -><I ->name</I -></TT -> - -<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT -> # disable action <TT -CLASS="REPLACEABLE" -><I ->name</I -></TT -></PRE -></TD -></TR -></TABLE -> - </P -><P -> - Example: <TT -CLASS="LITERAL" ->+handle-as-image</TT -> - </P -></LI -><LI -><P -> - Parameterized, where some value is required in order to enable this type of action. - Syntax: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> +<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT ->{<TT -CLASS="REPLACEABLE" -><I ->param</I -></TT ->} # enable action and set parameter to <TT -CLASS="REPLACEABLE" -><I ->param</I -></TT ->, - # overwriting parameter from previous match if necessary - -<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT -> # disable action. The parameter can be omitted</PRE -></TD -></TR -></TABLE -> - </P -><P -> Note that if the URL matches multiple positive forms of a parameterized action, - the last match wins, i.e. the params from earlier matches are simply ignored. - </P -><P -> - Example: <TT -CLASS="LITERAL" ->+hide-user-agent{Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.4) Gecko/20070602 Firefox/2.0.0.4}</TT -> - </P -></LI -><LI -><P -> - Multi-value. These look exactly like parameterized actions, - but they behave differently: If the action applies multiple times to the - same URL, but with different parameters, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> the parameters - from <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> matches are remembered. This is used for actions - that can be executed for the same request repeatedly, like adding multiple - headers, or filtering through multiple filters. Syntax: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> +<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT ->{<TT -CLASS="REPLACEABLE" -><I ->param</I -></TT ->} # enable action and add <TT -CLASS="REPLACEABLE" -><I ->param</I -></TT -> to the list of parameters - -<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT ->{<TT -CLASS="REPLACEABLE" -><I ->param</I -></TT ->} # remove the parameter <TT -CLASS="REPLACEABLE" -><I ->param</I -></TT -> from the list of parameters - # If it was the last one left, disable the action. - <TT -CLASS="REPLACEABLE" -><I ->-name</I -></TT -> # disable this action completely and remove all parameters from the list</PRE -></TD -></TR -></TABLE -> - </P -><P -> - Examples: <TT -CLASS="LITERAL" ->+add-header{X-Fun-Header: Some text}</TT -> and - <TT -CLASS="LITERAL" ->+filter{html-annoyances}</TT -> - </P -></LI -></UL -></P -><P -> If nothing is specified in any actions file, no <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> are - taken. So in this case <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> would just be a - normal, non-blocking, non-filtering proxy. You must specifically enable the - privacy and blocking features you need (although the provided default actions - files will give a good starting point).</P -><P -> Later defined action sections always over-ride earlier ones of the same type. - So exceptions to any rules you make, should come in the latter part of the file (or - in a file that is processed later when using multiple actions files such - as <TT -CLASS="FILENAME" ->user.action</TT ->). For multi-valued actions, the actions - are applied in the order they are specified. Actions files are processed in - the order they are defined in <TT -CLASS="FILENAME" ->config</TT -> (the default - installation has three actions files). It also quite possible for any given - URL to match more than one <SPAN -CLASS="QUOTE" ->"pattern"</SPAN -> (because of wildcards and - regular expressions), and thus to trigger more than one set of actions! Last - match wins.</P -><P -> The list of valid <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> actions are:</P -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ADD-HEADER" ->8.5.1. add-header</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Confuse log analysis, custom applications</P -></DD -><DT ->Effect:</DT -><DD -><P -> Sends a user defined HTTP header to the web server. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Multi-value.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Any string value is possible. Validity of the defined HTTP headers is not checked. - It is recommended that you use the <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->X-</TT ->"</SPAN -> prefix - for custom headers. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This action may be specified multiple times, in order to define multiple - headers. This is rarely needed for the typical user. If you don't know what - <SPAN -CLASS="QUOTE" ->"HTTP headers"</SPAN -> are, you definitely don't need to worry about this - one. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+add-header{X-User-Tracking: sucks}</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="BLOCK" ->8.5.2. block</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Block ads or other unwanted content</P -></DD -><DT ->Effect:</DT -><DD -><P -> Requests for URLs to which this action applies are blocked, i.e. the - requests are trapped by <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and the requested URL is never retrieved, - but is answered locally with a substitute page or image, as determined by - the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT ->, - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A -></TT ->, and - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT" ->handle-as-empty-document</A -></TT -> actions. - - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P ->A block reason that should be given to the user.</P -></DD -><DT ->Notes:</DT -><DD -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> sends a special <SPAN -CLASS="QUOTE" ->"BLOCKED"</SPAN -> page - for requests to blocked pages. This page contains the block reason given as - parameter, a link to find out why the block action applies, and a click-through - to the blocked content (the latter only if the force feature is available and - enabled). - </P -><P -> - A very important exception occurs if <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN -> - <TT -CLASS="LITERAL" ->block</TT -> and <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT ->, - apply to the same request: it will then be replaced by an image. If - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A -></TT -> - (see below) also applies, the type of image will be determined by its parameter, - if not, the standard checkerboard pattern is sent. - </P -><P -> It is important to understand this process, in order - to understand how <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> deals with - ads and other unwanted content. Blocking is a core feature, and one - upon which various other features depend. - </P -><P -> The <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filter</A -></TT -> - action can perform a very similar task, by <SPAN -CLASS="QUOTE" ->"blocking"</SPAN -> - banner images and other content through rewriting the relevant URLs in the - document's HTML source, so they don't get requested in the first place. - Note that this is a totally different technique, and it's easy to confuse the two. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{+block{No nasty stuff for you.}} -# Block and replace with "blocked" page - .nasty-stuff.example.com - -{+block{Doubleclick banners.} +handle-as-image} -# Block and replace with image - .ad.doubleclick.net - .ads.r.us/banners/ - -{+block{Layered ads.} +handle-as-empty-document} -# Block and then ignore - adserver.example.net/.*\.js$</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CHANGE-X-FORWARDED-FOR" ->8.5.3. change-x-forwarded-for</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Improve privacy by not forwarding the source of the request in the HTTP headers.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes the <SPAN -CLASS="QUOTE" ->"X-Forwarded-For:"</SPAN -> HTTP header from the client request, - or adds a new one. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -></P -><UL -><LI -><P -><SPAN -CLASS="QUOTE" ->"block"</SPAN -> to delete the header.</P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"add"</SPAN -> to create the header (or append - the client's IP address to an already existing one). - </P -></LI -></UL -></DD -><DT ->Notes:</DT -><DD -><P -> It is safe and recommended to use <TT -CLASS="LITERAL" ->block</TT ->. - </P -><P -> Forwarding the source address of the request may make - sense in some multi-user setups but is also a privacy risk. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+change-x-forwarded-for{block}</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CLIENT-HEADER-FILTER" ->8.5.4. client-header-filter</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Rewrite or remove single client headers. - </P -></DD -><DT ->Effect:</DT -><DD -><P -> All client headers to which this action applies are filtered on-the-fly through - the specified regular expression based substitutions. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> The name of a client-header filter, as defined in one of the - <A -HREF="filter-file.html" ->filter files</A ->. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Client-header filters are applied to each header on its own, not to - all at once. This makes it easier to diagnose problems, but on the downside - you can't write filters that only change header x if header y's value is z. - You can do that by using tags though. - </P -><P -> Client-header filters are executed after the other header actions have finished - and use their output as input. - </P -><P -> If the request URL gets changed, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will detect that and use the new - one. This can be used to rewrite the request destination behind the client's - back, for example to specify a Tor exit relay for certain requests. - </P -><P -> Please refer to the <A -HREF="filter-file.html" ->filter file chapter</A -> - to learn which client-header filters are available by default, and how to - create your own. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Hide Tor exit notation in Host and Referer Headers -{+client-header-filter{hide-tor-exit-notation}} -/ - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CLIENT-HEADER-TAGGER" ->8.5.5. client-header-tagger</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Block requests based on their headers. - </P -></DD -><DT ->Effect:</DT -><DD -><P -> Client headers to which this action applies are filtered on-the-fly through - the specified regular expression based substitutions, the result is used as - tag. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> The name of a client-header tagger, as defined in one of the - <A -HREF="filter-file.html" ->filter files</A ->. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Client-header taggers are applied to each header on its own, - and as the header isn't modified, each tagger <SPAN -CLASS="QUOTE" ->"sees"</SPAN -> - the original. - </P -><P -> Client-header taggers are the first actions that are executed - and their tags can be used to control every other action. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Tag every request with the User-Agent header -{+client-header-tagger{user-agent}} -/ - -# Tagging itself doesn't change the action -# settings, sections with TAG patterns do: -# -# If it's a download agent, use a different forwarding proxy, -# show the real User-Agent and make sure resume works. -{+forward-override{forward-socks5 10.0.0.2:2222 .} \ - -hide-if-modified-since \ - -overwrite-last-modified \ - -hide-user-agent \ - -filter \ - -deanimate-gifs \ -} -TAG:^User-Agent: NetBSD-ftp/ -TAG:^User-Agent: Novell ZYPP Installer -TAG:^User-Agent: RPM APT-HTTP/ -TAG:^User-Agent: fetch libfetch/ -TAG:^User-Agent: Ubuntu APT-HTTP/ -TAG:^User-Agent: MPlayer/ - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CONTENT-TYPE-OVERWRITE" ->8.5.6. content-type-overwrite</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Stop useless download menus from popping up, or change the browser's rendering mode</P -></DD -><DT ->Effect:</DT -><DD -><P -> Replaces the <SPAN -CLASS="QUOTE" ->"Content-Type:"</SPAN -> HTTP server header. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Any string. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The <SPAN -CLASS="QUOTE" ->"Content-Type:"</SPAN -> HTTP server header is used by the - browser to decide what to do with the document. The value of this - header can cause the browser to open a download menu instead of - displaying the document by itself, even if the document's format is - supported by the browser. - </P -><P -> The declared content type can also affect which rendering mode - the browser chooses. If XHTML is delivered as <SPAN -CLASS="QUOTE" ->"text/html"</SPAN ->, - many browsers treat it as yet another broken HTML document. - If it is send as <SPAN -CLASS="QUOTE" ->"application/xml"</SPAN ->, browsers with - XHTML support will only display it, if the syntax is correct. - </P -><P -> If you see a web site that proudly uses XHTML buttons, but sets - <SPAN -CLASS="QUOTE" ->"Content-Type: text/html"</SPAN ->, you can use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - to overwrite it with <SPAN -CLASS="QUOTE" ->"application/xml"</SPAN -> and validate - the web master's claim inside your XHTML-supporting browser. - If the syntax is incorrect, the browser will complain loudly. - </P -><P -> You can also go the opposite direction: if your browser prints - error messages instead of rendering a document falsely declared - as XHTML, you can overwrite the content type with - <SPAN -CLASS="QUOTE" ->"text/html"</SPAN -> and have it rendered as broken HTML document. - </P -><P -> By default <TT -CLASS="LITERAL" ->content-type-overwrite</TT -> only replaces - <SPAN -CLASS="QUOTE" ->"Content-Type:"</SPAN -> headers that look like some kind of text. - If you want to overwrite it unconditionally, you have to combine it with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FORCE-TEXT-MODE" ->force-text-mode</A -></TT ->. - This limitation exists for a reason, think twice before circumventing it. - </P -><P -> Most of the time it's easier to replace this action with a custom - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SERVER-HEADER-FILTER" ->server-header filter</A -></TT ->. - It allows you to activate it for every document of a certain site and it will still - only replace the content types you aimed at. - </P -><P -> Of course you can apply <TT -CLASS="LITERAL" ->content-type-overwrite</TT -> - to a whole site and then make URL based exceptions, but it's a lot - more work to get the same precision. - </P -></DD -><DT ->Example usage (sections):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Check if www.example.net/ really uses valid XHTML -{ +content-type-overwrite{application/xml} } -www.example.net/ - -# but leave the content type unmodified if the URL looks like a style sheet -{-content-type-overwrite} -www.example.net/.*\.css$ -www.example.net/.*style</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CRUNCH-CLIENT-HEADER" ->8.5.7. crunch-client-header</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Remove a client header <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has no dedicated action for.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes every header sent by the client that contains the string the user supplied as parameter. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Any string. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This action allows you to block client headers for which no dedicated - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> action exists. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will remove every client header that - contains the string you supplied as parameter. - </P -><P -> Regular expressions are <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not supported</I -></SPAN -> and you can't - use this action to block different headers in the same request, unless - they contain the same string. - </P -><P -> <TT -CLASS="LITERAL" ->crunch-client-header</TT -> is only meant for quick tests. - If you have to block several different headers, or only want to modify - parts of them, you should use a - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CLIENT-HEADER-FILTER" ->client-header filter</A -></TT ->. - </P -><DIV -CLASS="WARNING" -><P -></P -><TABLE -CLASS="WARNING" -BORDER="1" -WIDTH="90%" -><TR -><TD -ALIGN="CENTER" -><B ->Warning</B -></TD -></TR -><TR -><TD -ALIGN="LEFT" -><P -> Don't block any header without understanding the consequences. - </P -></TD -></TR -></TABLE -></DIV -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Block the non-existent "Privacy-Violation:" client header -{ +crunch-client-header{Privacy-Violation:} } -/ - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CRUNCH-IF-NONE-MATCH" ->8.5.8. crunch-if-none-match</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Prevent yet another way to track the user's steps between sessions.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes the <SPAN -CLASS="QUOTE" ->"If-None-Match:"</SPAN -> HTTP client header. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Removing the <SPAN -CLASS="QUOTE" ->"If-None-Match:"</SPAN -> HTTP client header - is useful for filter testing, where you want to force a real - reload instead of getting status code <SPAN -CLASS="QUOTE" ->"304"</SPAN -> which - would cause the browser to use a cached copy of the page. - </P -><P -> It is also useful to make sure the header isn't used as a cookie - replacement (unlikely but possible). - </P -><P -> Blocking the <SPAN -CLASS="QUOTE" ->"If-None-Match:"</SPAN -> header shouldn't cause any - caching problems, as long as the <SPAN -CLASS="QUOTE" ->"If-Modified-Since:"</SPAN -> header - isn't blocked or missing as well. - </P -><P -> It is recommended to use this action together with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE" ->hide-if-modified-since</A -></TT -> - and - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#OVERWRITE-LAST-MODIFIED" ->overwrite-last-modified</A -></TT ->. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Let the browser revalidate cached documents but don't -# allow the server to use the revalidation headers for user tracking. -{+hide-if-modified-since{-60} \ - +overwrite-last-modified{randomize} \ - +crunch-if-none-match} -/ </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CRUNCH-INCOMING-COOKIES" ->8.5.9. crunch-incoming-cookies</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Prevent the web server from setting HTTP cookies on your system - </P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes any <SPAN -CLASS="QUOTE" ->"Set-Cookie:"</SPAN -> HTTP headers from server replies. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This action is only concerned with <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->incoming</I -></SPAN -> HTTP cookies. For - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->outgoing</I -></SPAN -> HTTP cookies, use - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -></TT ->. - Use <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN -> to disable HTTP cookies completely. - </P -><P -> It makes <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->no sense at all</I -></SPAN -> to use this action in conjunction - with the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SESSION-COOKIES-ONLY" ->session-cookies-only</A -></TT -> action, - since it would prevent the session cookies from being set. See also - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER-CONTENT-COOKIES" ->filter-content-cookies</A -></TT ->. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+crunch-incoming-cookies</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CRUNCH-SERVER-HEADER" ->8.5.10. crunch-server-header</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Remove a server header <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has no dedicated action for.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes every header sent by the server that contains the string the user supplied as parameter. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Any string. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This action allows you to block server headers for which no dedicated - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> action exists. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - will remove every server header that contains the string you supplied as parameter. - </P -><P -> Regular expressions are <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not supported</I -></SPAN -> and you can't - use this action to block different headers in the same request, unless - they contain the same string. - </P -><P -> <TT -CLASS="LITERAL" ->crunch-server-header</TT -> is only meant for quick tests. - If you have to block several different headers, or only want to modify - parts of them, you should use a custom - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SERVER-HEADER-FILTER" ->server-header filter</A -></TT ->. - </P -><DIV -CLASS="WARNING" -><P -></P -><TABLE -CLASS="WARNING" -BORDER="1" -WIDTH="90%" -><TR -><TD -ALIGN="CENTER" -><B ->Warning</B -></TD -></TR -><TR -><TD -ALIGN="LEFT" -><P -> Don't block any header without understanding the consequences. - </P -></TD -></TR -></TABLE -></DIV -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Crunch server headers that try to prevent caching -{ +crunch-server-header{no-cache} } -/ </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CRUNCH-OUTGOING-COOKIES" ->8.5.11. crunch-outgoing-cookies</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Prevent the web server from reading any HTTP cookies from your system - </P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes any <SPAN -CLASS="QUOTE" ->"Cookie:"</SPAN -> HTTP headers from client requests. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This action is only concerned with <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->outgoing</I -></SPAN -> HTTP cookies. For - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->incoming</I -></SPAN -> HTTP cookies, use - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -></TT ->. - Use <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN -> to disable HTTP cookies completely. - </P -><P -> It makes <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->no sense at all</I -></SPAN -> to use this action in conjunction - with the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SESSION-COOKIES-ONLY" ->session-cookies-only</A -></TT -> action, - since it would prevent the session cookies from being read. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+crunch-outgoing-cookies</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="DEANIMATE-GIFS" ->8.5.12. deanimate-gifs</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Stop those annoying, distracting animated GIF images.</P -></DD -><DT ->Effect:</DT -><DD -><P -> De-animate GIF animations, i.e. reduce them to their first or last image. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> <SPAN -CLASS="QUOTE" ->"last"</SPAN -> or <SPAN -CLASS="QUOTE" ->"first"</SPAN -> - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This will also shrink the images considerably (in bytes, not pixels!). If - the option <SPAN -CLASS="QUOTE" ->"first"</SPAN -> is given, the first frame of the animation - is used as the replacement. If <SPAN -CLASS="QUOTE" ->"last"</SPAN -> is given, the last - frame of the animation is used instead, which probably makes more sense for - most banner animations, but also has the risk of not showing the entire - last frame (if it is only a delta to an earlier frame). - </P -><P -> You can safely use this action with patterns that will also match non-GIF - objects, because no attempt will be made at anything that doesn't look like - a GIF. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+deanimate-gifs{last}</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="DOWNGRADE-HTTP-VERSION" ->8.5.13. downgrade-http-version</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Work around (very rare) problems with HTTP/1.1</P -></DD -><DT ->Effect:</DT -><DD -><P -> Downgrades HTTP/1.1 client requests and server replies to HTTP/1.0. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This is a left-over from the time when <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - didn't support important HTTP/1.1 features well. It is left here for the - unlikely case that you experience HTTP/1.1 related problems with some server - out there. Not all HTTP/1.1 features and requirements are supported yet, - so there is a chance you might need this action. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{+downgrade-http-version} -problem-host.example.com</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="FAST-REDIRECTS" ->8.5.14. fast-redirects</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Fool some click-tracking scripts and speed up indirect links.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Detects redirection URLs and redirects the browser without contacting - the redirection server first. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -></P -><UL -><LI -><P -> <SPAN -CLASS="QUOTE" ->"simple-check"</SPAN -> to just search for the string <SPAN -CLASS="QUOTE" ->"http://"</SPAN -> - to detect redirection URLs. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"check-decoded-url"</SPAN -> to decode URLs (if necessary) before searching - for redirection URLs. - </P -></LI -></UL -></DD -><DT ->Notes:</DT -><DD -><P -> - Many sites, like yahoo.com, don't just link to other sites. Instead, they - will link to some script on their own servers, giving the destination as a - parameter, which will then redirect you to the final target. URLs - resulting from this scheme typically look like: - <SPAN -CLASS="QUOTE" ->"http://www.example.org/click-tracker.cgi?target=http%3a//www.example.net/"</SPAN ->. - </P -><P -> Sometimes, there are even multiple consecutive redirects encoded in the - URL. These redirections via scripts make your web browsing more traceable, - since the server from which you follow such a link can see where you go - to. Apart from that, valuable bandwidth and time is wasted, while your - browser asks the server for one redirect after the other. Plus, it feeds - the advertisers. - </P -><P -> This feature is currently not very smart and is scheduled for improvement. - If it is enabled by default, you will have to create some exceptions to - this action. It can lead to failures in several ways: - </P -><P -> Not every URLs with other URLs as parameters is evil. - Some sites offer a real service that requires this information to work. - For example a validation service needs to know, which document to validate. - <TT -CLASS="LITERAL" ->fast-redirects</TT -> assumes that every URL parameter that - looks like another URL is a redirection target, and will always redirect to - the last one. Most of the time the assumption is correct, but if it isn't, - the user gets redirected anyway. - </P -><P -> Another failure occurs if the URL contains other parameters after the URL parameter. - The URL: - <SPAN -CLASS="QUOTE" ->"http://www.example.org/?redirect=http%3a//www.example.net/&foo=bar"</SPAN ->. - contains the redirection URL <SPAN -CLASS="QUOTE" ->"http://www.example.net/"</SPAN ->, - followed by another parameter. <TT -CLASS="LITERAL" ->fast-redirects</TT -> doesn't know that - and will cause a redirect to <SPAN -CLASS="QUOTE" ->"http://www.example.net/&foo=bar"</SPAN ->. - Depending on the target server configuration, the parameter will be silently ignored - or lead to a <SPAN -CLASS="QUOTE" ->"page not found"</SPAN -> error. You can prevent this problem by - first using the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#REDIRECT" ->redirect</A -></TT -> action - to remove the last part of the URL, but it requires a little effort. - </P -><P -> To detect a redirection URL, <TT -CLASS="LITERAL" ->fast-redirects</TT -> only - looks for the string <SPAN -CLASS="QUOTE" ->"http://"</SPAN ->, either in plain text - (invalid but often used) or encoded as <SPAN -CLASS="QUOTE" ->"http%3a//"</SPAN ->. - Some sites use their own URL encoding scheme, encrypt the address - of the target server or replace it with a database id. In theses cases - <TT -CLASS="LITERAL" ->fast-redirects</TT -> is fooled and the request reaches the - redirection server where it probably gets logged. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { +fast-redirects{simple-check} } - one.example.com - - { +fast-redirects{check-decoded-url} } - another.example.com/testing</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="FILTER" ->8.5.15. filter</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Get rid of HTML and JavaScript annoyances, banner advertisements (by size), - do fun text replacements, add personalized effects, etc.</P -></DD -><DT ->Effect:</DT -><DD -><P -> All instances of text-based type, most notably HTML and JavaScript, to which - this action applies, can be filtered on-the-fly through the specified regular - expression based substitutions. (Note: as of version 3.0.3 plain text documents - are exempted from filtering, because web servers often use the - <TT -CLASS="LITERAL" ->text/plain</TT -> MIME type for all files whose type they don't know.) - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> The name of a content filter, as defined in the <A -HREF="filter-file.html" ->filter file</A ->. - Filters can be defined in one or more files as defined by the - <TT -CLASS="LITERAL" -><A -HREF="config.html#FILTERFILE" ->filterfile</A -></TT -> - option in the <A -HREF="config.html" ->config file</A ->. - <TT -CLASS="FILENAME" ->default.filter</TT -> is the collection of filters - supplied by the developers. Locally defined filters should go - in their own file, such as <TT -CLASS="FILENAME" ->user.filter</TT ->. - </P -><P -> When used in its negative form, - and without parameters, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> filtering is completely disabled. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> For your convenience, there are a number of pre-defined filters available - in the distribution filter file that you can use. See the examples below for - a list. - </P -><P -> Filtering requires buffering the page content, which may appear to - slow down page rendering since nothing is displayed until all content has - passed the filters. (It does not really take longer, but seems that way - since the page is not incrementally displayed.) This effect will be more - noticeable on slower connections. - </P -><P -> <SPAN -CLASS="QUOTE" ->"Rolling your own"</SPAN -> - filters requires a knowledge of - <A -HREF="http://en.wikipedia.org/wiki/Regular_expressions" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"Regular - Expressions"</SPAN -></A -> and - <A -HREF="http://en.wikipedia.org/wiki/Html" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"HTML"</SPAN -></A ->. - This is very powerful feature, and potentially very intrusive. - Filters should be used with caution, and where an equivalent - <SPAN -CLASS="QUOTE" ->"action"</SPAN -> is not available. - </P -><P -> The amount of data that can be filtered is limited to the - <TT -CLASS="LITERAL" -><A -HREF="config.html#BUFFER-LIMIT" ->buffer-limit</A -></TT -> - option in the main <A -HREF="config.html" ->config file</A ->. The - default is 4096 KB (4 Megs). Once this limit is exceeded, the buffered - data, and all pending data, is passed through unfiltered. - </P -><P -> Inappropriate MIME types, such as zipped files, are not filtered at all. - (Again, only text-based types except plain text). Encrypted SSL data - (from HTTPS servers) cannot be filtered either, since this would violate - the integrity of the secure transaction. In some situations it might - be necessary to protect certain text, like source code, from filtering - by defining appropriate <TT -CLASS="LITERAL" ->-filter</TT -> exceptions. - </P -><P -> Compressed content can't be filtered either, unless <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is compiled with zlib support (requires at least <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.7), - in which case <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will decompress the content before filtering - it. - </P -><P -> If you use a <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version without zlib support, but want filtering to work on - as much documents as possible, even those that would normally be sent compressed, - you must use the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#PREVENT-COMPRESSION" ->prevent-compression</A -></TT -> - action in conjunction with <TT -CLASS="LITERAL" ->filter</TT ->. - </P -><P -> Content filtering can achieve some of the same effects as the - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> - action, i.e. it can be used to block ads and banners. But the mechanism - works quite differently. One effective use, is to block ad banners - based on their size (see below), since many of these seem to be somewhat - standardized. - </P -><P -> <A -HREF="contact.html" ->Feedback</A -> with suggestions for new or - improved filters is particularly welcome! - </P -><P -> The below list has only the names and a one-line description of each - predefined filter. There are <A -HREF="filter-file.html#PREDEFINED-FILTERS" ->more - verbose explanations</A -> of what these filters do in the <A -HREF="filter-file.html" ->filter file chapter</A ->. - </P -></DD -><DT ->Example usage (with filters from the distribution <TT -CLASS="FILENAME" ->default.filter</TT -> file). - See <A -HREF="filter-file.html#PREDEFINED-FILTERS" ->the Predefined Filters section</A -> for - more explanation on each:</DT -><DD -><P -> <A -NAME="FILTER-JS-ANNOYANCES" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{js-annoyances} # Get rid of particularly annoying JavaScript abuse.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-JS-EVENTS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{js-events} # Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-HTML-ANNOYANCES" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{html-annoyances} # Get rid of particularly annoying HTML abuse.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-CONTENT-COOKIES" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{content-cookies} # Kill cookies that come in the HTML or JS content.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-REFRESH-TAGS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{refresh-tags} # Kill automatic refresh tags (for dial-on-demand setups).</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-UNSOLICITED-POPUPS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{unsolicited-popups} # Disable only unsolicited pop-up windows. Useful if your browser lacks this ability.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-ALL-POPUPS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{all-popups} # Kill all popups in JavaScript and HTML. Useful if your browser lacks this ability.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-IMG-REORDER" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{img-reorder} # Reorder attributes in <img> tags to make the banners-by-* filters more effective.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-BANNERS-BY-SIZE" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{banners-by-size} # Kill banners by size.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-BANNERS-BY-LINK" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{banners-by-link} # Kill banners by their links to known clicktrackers.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-WEBBUGS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{webbugs} # Squish WebBugs (1x1 invisible GIFs used for user tracking).</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-TINY-TEXTFORMS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{tiny-textforms} # Extend those tiny textareas up to 40x80 and kill the hard wrap.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-JUMPING-WINDOWS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{jumping-windows} # Prevent windows from resizing and moving themselves.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-FRAMESET-BORDERS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{frameset-borders} # Give frames a border and make them resizable.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-DEMORONIZER" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{demoronizer} # Fix MS's non-standard use of standard charsets.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-SHOCKWAVE-FLASH" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{shockwave-flash} # Kill embedded Shockwave Flash objects.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-QUICKTIME-KIOSKMODE" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{quicktime-kioskmode} # Make Quicktime movies saveable.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-FUN" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{fun} # Text replacements for subversive browsing fun!</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-CRUDE-PARENTAL" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{crude-parental} # Crude parental filtering. Note that this filter doesn't work reliably.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-IE-EXPLOITS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{ie-exploits} # Disable some known Internet Explorer bug exploits.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-SITE-SPECIFICS" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{site-specifics} # Cure for site-specific problems. Don't apply generally!</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-NO-PING" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{no-ping} # Removes non-standard ping attributes in <a> and <area> tags.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-GOOGLE" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{google} # CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-YAHOO" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{yahoo} # CSS-based block for Yahoo text ads. Also removes a width limitation.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-MSN" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{msn} # CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.</PRE -></TD -></TR -></TABLE -> - </P -><P -> <A -NAME="FILTER-BLOGSPOT" -></A -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+filter{blogspot} # Cleans up some Blogspot blogs. Read the fine print before using this.</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="FORCE-TEXT-MODE" ->8.5.16. force-text-mode</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Force <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to treat a document as if it was in some kind of <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->text</I -></SPAN -> format. </P -></DD -><DT ->Effect:</DT -><DD -><P -> Declares a document as text, even if the <SPAN -CLASS="QUOTE" ->"Content-Type:"</SPAN -> isn't detected as such. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> As explained <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->above</A -></TT ->, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> tries to only filter files that are - in some kind of text format. The same restrictions apply to - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CONTENT-TYPE-OVERWRITE" ->content-type-overwrite</A -></TT ->. - <TT -CLASS="LITERAL" ->force-text-mode</TT -> declares a document as text, - without looking at the <SPAN -CLASS="QUOTE" ->"Content-Type:"</SPAN -> first. - </P -><DIV -CLASS="WARNING" -><P -></P -><TABLE -CLASS="WARNING" -BORDER="1" -WIDTH="90%" -><TR -><TD -ALIGN="CENTER" -><B ->Warning</B -></TD -></TR -><TR -><TD -ALIGN="LEFT" -><P -> Think twice before activating this action. Filtering binary data - with regular expressions can cause file damage. - </P -></TD -></TR -></TABLE -></DIV -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+force-text-mode - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="FORWARD-OVERRIDE" ->8.5.17. forward-override</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Change the forwarding settings based on User-Agent or request origin</P -></DD -><DT ->Effect:</DT -><DD -><P -> Overrules the forward directives in the configuration file. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Multi-value.</P -></DD -><DT ->Parameter:</DT -><DD -><P -></P -><UL -><LI -><P -><SPAN -CLASS="QUOTE" ->"forward ."</SPAN -> to use a direct connection without any additional proxies.</P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"forward 127.0.0.1:8123"</SPAN -> to use the HTTP proxy listening at 127.0.0.1 port 8123. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"forward-socks4a 127.0.0.1:9050 ."</SPAN -> to use the socks4a proxy listening at - 127.0.0.1 port 9050. Replace <SPAN -CLASS="QUOTE" ->"forward-socks4a"</SPAN -> with <SPAN -CLASS="QUOTE" ->"forward-socks4"</SPAN -> - to use a socks4 connection (with local DNS resolution) instead, use <SPAN -CLASS="QUOTE" ->"forward-socks5"</SPAN -> - for socks5 connections (with remote DNS resolution). - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"forward-socks4a 127.0.0.1:9050 proxy.example.org:8000"</SPAN -> to use the socks4a proxy - listening at 127.0.0.1 port 9050 to reach the HTTP proxy listening at proxy.example.org port 8000. - Replace <SPAN -CLASS="QUOTE" ->"forward-socks4a"</SPAN -> with <SPAN -CLASS="QUOTE" ->"forward-socks4"</SPAN -> to use a socks4 connection - (with local DNS resolution) instead, use <SPAN -CLASS="QUOTE" ->"forward-socks5"</SPAN -> - for socks5 connections (with remote DNS resolution). - </P -></LI -></UL -></DD -><DT ->Notes:</DT -><DD -><P -> This action takes parameters similar to the - <A -HREF="config.html#FORWARDING" ->forward</A -> directives in the configuration - file, but without the URL pattern. It can be used as replacement, but normally it's only - used in cases where matching based on the request URL isn't sufficient. - </P -><DIV -CLASS="WARNING" -><P -></P -><TABLE -CLASS="WARNING" -BORDER="1" -WIDTH="90%" -><TR -><TD -ALIGN="CENTER" -><B ->Warning</B -></TD -></TR -><TR -><TD -ALIGN="LEFT" -><P -> Please read the description for the <A -HREF="config.html#FORWARDING" ->forward</A -> directives before - using this action. Forwarding to the wrong people will reduce your privacy and increase the - chances of man-in-the-middle attacks. - </P -><P -> If the ports are missing or invalid, default values will be used. This might change - in the future and you shouldn't rely on it. Otherwise incorrect syntax causes Privoxy - to exit. - </P -><P -> Use the <A -HREF="http://config.privoxy.org/show-url-info" -TARGET="_top" ->show-url-info CGI page</A -> - to verify that your forward settings do what you thought the do. - </P -></TD -></TR -></TABLE -></DIV -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Always use direct connections for requests previously tagged as -# <SPAN -CLASS="QUOTE" ->"User-Agent: fetch libfetch/2.0"</SPAN -> and make sure -# resuming downloads continues to work. -# This way you can continue to use Tor for your normal browsing, -# without overloading the Tor network with your FreeBSD ports updates -# or downloads of bigger files like ISOs. -# Note that HTTP headers are easy to fake and therefore their -# values are as (un)trustworthy as your clients and users. -{+forward-override{forward .} \ - -hide-if-modified-since \ - -overwrite-last-modified \ -} -TAG:^User-Agent: fetch libfetch/2\.0$ - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HANDLE-AS-EMPTY-DOCUMENT" ->8.5.18. handle-as-empty-document</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Mark URLs that should be replaced by empty documents <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->if they get blocked</I -></SPAN -></P -></DD -><DT ->Effect:</DT -><DD -><P -> This action alone doesn't do anything noticeable. It just marks URLs. - If the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> action <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->also applies</I -></SPAN ->, - the presence or absence of this mark decides whether an HTML <SPAN -CLASS="QUOTE" ->"BLOCKED"</SPAN -> - page, or an empty document will be sent to the client as a substitute for the blocked content. - The <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->empty</I -></SPAN -> document isn't literally empty, but actually contains a single space. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Some browsers complain about syntax errors if JavaScript documents - are blocked with <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - default HTML page; this option can be used to silence them. - And of course this action can also be used to eliminate the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - BLOCKED message in frames. - </P -><P -> The content type for the empty document can be specified with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CONTENT-TYPE-OVERWRITE" ->content-type-overwrite{}</A -></TT ->, - but usually this isn't necessary. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Block all documents on example.org that end with ".js", -# but send an empty document instead of the usual HTML message. -{+block{Blocked JavaScript} +handle-as-empty-document} -example.org/.*\.js$ - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HANDLE-AS-IMAGE" ->8.5.19. handle-as-image</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Mark URLs as belonging to images (so they'll be replaced by images <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->if they do get blocked</I -></SPAN ->, rather than HTML pages)</P -></DD -><DT ->Effect:</DT -><DD -><P -> This action alone doesn't do anything noticeable. It just marks URLs as images. - If the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> action <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->also applies</I -></SPAN ->, - the presence or absence of this mark decides whether an HTML <SPAN -CLASS="QUOTE" ->"blocked"</SPAN -> - page, or a replacement image (as determined by the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A -></TT -> action) will be sent to the - client as a substitute for the blocked content. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The below generic example section is actually part of <TT -CLASS="FILENAME" ->default.action</TT ->. - It marks all URLs with well-known image file name extensions as images and should - be left intact. - </P -><P -> Users will probably only want to use the handle-as-image action in conjunction with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT ->, to block sources of banners, whose URLs don't - reflect the file type, like in the second example section. - </P -><P -> Note that you cannot treat HTML pages as images in most cases. For instance, (in-line) ad - frames require an HTML page to be sent, or they won't display properly. - Forcing <TT -CLASS="LITERAL" ->handle-as-image</TT -> in this situation will not replace the - ad frame with an image, but lead to error messages. - </P -></DD -><DT ->Example usage (sections):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Generic image extensions: -# -{+handle-as-image} -/.*\.(gif|jpg|jpeg|png|bmp|ico)$ - -# These don't look like images, but they're banners and should be -# blocked as images: -# -{+block{Nasty banners.} +handle-as-image} -nasty-banner-server.example.com/junk.cgi\?output=trash</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HIDE-ACCEPT-LANGUAGE" ->8.5.20. hide-accept-language</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Pretend to use different language settings.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes or replaces the <SPAN -CLASS="QUOTE" ->"Accept-Language:"</SPAN -> HTTP header in client requests. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Keyword: <SPAN -CLASS="QUOTE" ->"block"</SPAN ->, or any user defined value. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Faking the browser's language settings can be useful to make a - foreign User-Agent set with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HIDE-USER-AGENT" ->hide-user-agent</A -></TT -> - more believable. - </P -><P -> However some sites with content in different languages check the - <SPAN -CLASS="QUOTE" ->"Accept-Language:"</SPAN -> to decide which one to take by default. - Sometimes it isn't possible to later switch to another language without - changing the <SPAN -CLASS="QUOTE" ->"Accept-Language:"</SPAN -> header first. - </P -><P -> Therefore it's a good idea to either only change the - <SPAN -CLASS="QUOTE" ->"Accept-Language:"</SPAN -> header to languages you understand, - or to languages that aren't wide spread. - </P -><P -> Before setting the <SPAN -CLASS="QUOTE" ->"Accept-Language:"</SPAN -> header - to a rare language, you should consider that it helps to - make your requests unique and thus easier to trace. - If you don't plan to change this header frequently, - you should stick to a common language. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Pretend to use Canadian language settings. -{+hide-accept-language{en-ca} \ -+hide-user-agent{Mozilla/5.0 (X11; U; OpenBSD i386; en-CA; rv:1.8.0.4) Gecko/20060628 Firefox/1.5.0.4} \ -} -/ </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HIDE-CONTENT-DISPOSITION" ->8.5.21. hide-content-disposition</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Prevent download menus for content you prefer to view inside the browser.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes or replaces the <SPAN -CLASS="QUOTE" ->"Content-Disposition:"</SPAN -> HTTP header set by some servers. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Keyword: <SPAN -CLASS="QUOTE" ->"block"</SPAN ->, or any user defined value. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Some servers set the <SPAN -CLASS="QUOTE" ->"Content-Disposition:"</SPAN -> HTTP header for - documents they assume you want to save locally before viewing them. - The <SPAN -CLASS="QUOTE" ->"Content-Disposition:"</SPAN -> header contains the file name - the browser is supposed to use by default. - </P -><P -> In most browsers that understand this header, it makes it impossible to - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->just view</I -></SPAN -> the document, without downloading it first, - even if it's just a simple text file or an image. - </P -><P -> Removing the <SPAN -CLASS="QUOTE" ->"Content-Disposition:"</SPAN -> header helps - to prevent this annoyance, but some browsers additionally check the - <SPAN -CLASS="QUOTE" ->"Content-Type:"</SPAN -> header, before they decide if they can - display a document without saving it first. In these cases, you have - to change this header as well, before the browser stops displaying - download menus. - </P -><P -> It is also possible to change the server's file name suggestion - to another one, but in most cases it isn't worth the time to set - it up. - </P -><P -> This action will probably be removed in the future, - use server-header filters instead. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Disarm the download link in Sourceforge's patch tracker -{ -filter \ - +content-type-overwrite{text/plain}\ - +hide-content-disposition{block} } - .sourceforge.net/tracker/download\.php</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HIDE-IF-MODIFIED-SINCE" ->8.5.22. hide-if-modified-since</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Prevent yet another way to track the user's steps between sessions.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes the <SPAN -CLASS="QUOTE" ->"If-Modified-Since:"</SPAN -> HTTP client header or modifies its value. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Keyword: <SPAN -CLASS="QUOTE" ->"block"</SPAN ->, or a user defined value that specifies a range of hours. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Removing this header is useful for filter testing, where you want to force a real - reload instead of getting status code <SPAN -CLASS="QUOTE" ->"304"</SPAN ->, which would cause the - browser to use a cached copy of the page. - </P -><P -> Instead of removing the header, <TT -CLASS="LITERAL" ->hide-if-modified-since</TT -> can - also add or subtract a random amount of time to/from the header's value. - You specify a range of minutes where the random factor should be chosen from and - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> does the rest. A negative value means - subtracting, a positive value adding. - </P -><P -> Randomizing the value of the <SPAN -CLASS="QUOTE" ->"If-Modified-Since:"</SPAN -> makes - it less likely that the server can use the time as a cookie replacement, - but you will run into caching problems if the random range is too high. - </P -><P -> It is a good idea to only use a small negative value and let - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#OVERWRITE-LAST-MODIFIED" ->overwrite-last-modified</A -></TT -> - handle the greater changes. - </P -><P -> It is also recommended to use this action together with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-IF-NONE-MATCH" ->crunch-if-none-match</A -></TT ->, - otherwise it's more or less pointless. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Let the browser revalidate but make tracking based on the time less likely. -{+hide-if-modified-since{-60} \ - +overwrite-last-modified{randomize} \ - +crunch-if-none-match} -/</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HIDE-FROM-HEADER" ->8.5.23. hide-from-header</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Keep your (old and ill) browser from telling web servers your email address</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes any existing <SPAN -CLASS="QUOTE" ->"From:"</SPAN -> HTTP header, or replaces it with the - specified string. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Keyword: <SPAN -CLASS="QUOTE" ->"block"</SPAN ->, or any user defined value. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The keyword <SPAN -CLASS="QUOTE" ->"block"</SPAN -> will completely remove the header - (not to be confused with the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> - action). - </P -><P -> Alternately, you can specify any value you prefer to be sent to the web - server. If you do, it is a matter of fairness not to use any address that - is actually used by a real person. - </P -><P -> This action is rarely needed, as modern web browsers don't send - <SPAN -CLASS="QUOTE" ->"From:"</SPAN -> headers anymore. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+hide-from-header{block}</PRE -></TD -></TR -></TABLE -> or - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+hide-from-header{spam-me-senseless(a)sittingduck.example.com}</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HIDE-REFERRER" ->8.5.24. hide-referrer</A -></H4 -><A -NAME="HIDE-REFERER" -></A -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Conceal which link you followed to get to a particular site</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes the <SPAN -CLASS="QUOTE" ->"Referer:"</SPAN -> (sic) HTTP header from the client request, - or replaces it with a forged one. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -></P -><UL -><LI -><P -><SPAN -CLASS="QUOTE" ->"conditional-block"</SPAN -> to delete the header completely if the host has changed.</P -></LI -><LI -><P -><SPAN -CLASS="QUOTE" ->"conditional-forge"</SPAN -> to forge the header if the host has changed.</P -></LI -><LI -><P -><SPAN -CLASS="QUOTE" ->"block"</SPAN -> to delete the header unconditionally.</P -></LI -><LI -><P -><SPAN -CLASS="QUOTE" ->"forge"</SPAN -> to pretend to be coming from the homepage of the server we are talking to.</P -></LI -><LI -><P ->Any other string to set a user defined referrer.</P -></LI -></UL -></DD -><DT ->Notes:</DT -><DD -><P -> <TT -CLASS="LITERAL" ->conditional-block</TT -> is the only parameter, - that isn't easily detected in the server's log file. If it blocks the - referrer, the request will look like the visitor used a bookmark or - typed in the address directly. - </P -><P -> Leaving the referrer unmodified for requests on the same host - allows the server owner to see the visitor's <SPAN -CLASS="QUOTE" ->"click path"</SPAN ->, - but in most cases she could also get that information by comparing - other parts of the log file: for example the User-Agent if it isn't - a very common one, or the user's IP address if it doesn't change between - different requests. - </P -><P -> Always blocking the referrer, or using a custom one, can lead to - failures on servers that check the referrer before they answer any - requests, in an attempt to prevent their content from being - embedded or linked to elsewhere. - </P -><P -> Both <TT -CLASS="LITERAL" ->conditional-block</TT -> and <TT -CLASS="LITERAL" ->forge</TT -> - will work with referrer checks, as long as content and valid referring page - are on the same host. Most of the time that's the case. - </P -><P -> - <TT -CLASS="LITERAL" ->hide-referer</TT -> is an alternate spelling of - <TT -CLASS="LITERAL" ->hide-referrer</TT -> and the two can be can be freely - substituted with each other. (<SPAN -CLASS="QUOTE" ->"referrer"</SPAN -> is the - correct English spelling, however the HTTP specification has a bug - it - requires it to be spelled as <SPAN -CLASS="QUOTE" ->"referer"</SPAN ->.) - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+hide-referrer{forge}</PRE -></TD -></TR -></TABLE -> or - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+hide-referrer{http://www.yahoo.com/}</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HIDE-USER-AGENT" ->8.5.25. hide-user-agent</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Try to conceal your type of browser and client operating system</P -></DD -><DT ->Effect:</DT -><DD -><P -> Replaces the value of the <SPAN -CLASS="QUOTE" ->"User-Agent:"</SPAN -> HTTP header - in client requests with the specified value. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> Any user-defined string. - </P -></DD -><DT ->Notes:</DT -><DD -><DIV -CLASS="WARNING" -><P -></P -><TABLE -CLASS="WARNING" -BORDER="1" -WIDTH="90%" -><TR -><TD -ALIGN="CENTER" -><B ->Warning</B -></TD -></TR -><TR -><TD -ALIGN="LEFT" -><P -> This can lead to problems on web sites that depend on looking at this header in - order to customize their content for different browsers (which, by the - way, is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->NOT</I -></SPAN -> the right thing to do: good web sites - work browser-independently). - </P -></TD -></TR -></TABLE -></DIV -><P -> Using this action in multi-user setups or wherever different types of - browsers will access the same <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not recommended</I -></SPAN ->. In single-user, single-browser - setups, you might use it to delete your OS version information from - the headers, because it is an invitation to exploit known bugs for your - OS. It is also occasionally useful to forge this in order to access - sites that won't let you in otherwise (though there may be a good - reason in some cases). Example of this: some MSN sites will not - let <SPAN -CLASS="APPLICATION" ->Mozilla</SPAN -> enter, yet forging to a - <SPAN -CLASS="APPLICATION" ->Netscape 6.1</SPAN -> user-agent works just fine. - (Must be just a silly MS goof, I'm sure :-). - </P -><P -> More information on known user-agent strings can be found at - <A -HREF="http://www.user-agents.org/" -TARGET="_top" ->http://www.user-agents.org/</A -> - and - <A -HREF="http://en.wikipedia.org/wiki/User_agent" -TARGET="_top" ->http://en.wikipedia.org/wiki/User_agent</A ->. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+hide-user-agent{Netscape 6.1 (X11; I; Linux 2.4.18 i686)}</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="LIMIT-CONNECT" ->8.5.26. limit-connect</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Prevent abuse of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> as a TCP proxy relay or disable SSL for untrusted sites</P -></DD -><DT ->Effect:</DT -><DD -><P -> Specifies to which ports HTTP CONNECT requests are allowable. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> A comma-separated list of ports or port ranges (the latter using dashes, with the minimum - defaulting to 0 and the maximum to 65K). - </P -></DD -><DT ->Notes:</DT -><DD -><P -> By default, i.e. if no <TT -CLASS="LITERAL" ->limit-connect</TT -> action applies, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> allows HTTP CONNECT requests to all - ports. Use <TT -CLASS="LITERAL" ->limit-connect</TT -> if fine-grained control - is desired for some or all destinations. - </P -><P -> The CONNECT methods exists in HTTP to allow access to secure websites - (<SPAN -CLASS="QUOTE" ->"https://"</SPAN -> URLs) through proxies. It works very simply: - the proxy connects to the server on the specified port, and then - short-circuits its connections to the client and to the remote server. - This means CONNECT-enabled proxies can be used as TCP relays very easily. - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> relays HTTPS traffic without seeing - the decoded content. Websites can leverage this limitation to circumvent <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s - filters. By specifying an invalid port range you can disable HTTPS entirely. - </P -></DD -><DT ->Example usages:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+limit-connect{443} # Port 443 is OK. -+limit-connect{80,443} # Ports 80 and 443 are OK. -+limit-connect{-3, 7, 20-100, 500-} # Ports less than 3, 7, 20 to 100 and above 500 are OK. -+limit-connect{-} # All ports are OK -+limit-connect{,} # No HTTPS/SSL traffic is allowed</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="PREVENT-COMPRESSION" ->8.5.27. prevent-compression</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Ensure that servers send the content uncompressed, so it can be - passed through <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filter</A -></TT ->s. - </P -></DD -><DT ->Effect:</DT -><DD -><P -> Removes the Accept-Encoding header which can be used to ask for compressed transfer. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> More and more websites send their content compressed by default, which - is generally a good idea and saves bandwidth. But the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filter</A -></TT -> and - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#DEANIMATE-GIFS" ->deanimate-gifs</A -></TT -> - actions need access to the uncompressed data. - </P -><P -> When compiled with zlib support (available since <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.7), content that should be - filtered is decompressed on-the-fly and you don't have to worry about this action. - If you are using an older <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version, or one that hasn't been compiled with zlib - support, this action can be used to convince the server to send the content uncompressed. - </P -><P -> Most text-based instances compress very well, the size is seldom decreased by less than 50%, - for markup-heavy instances like news feeds saving more than 90% of the original size isn't - unusual. - </P -><P -> Not using compression will therefore slow down the transfer, and you should only - enable this action if you really need it. As of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.7 it's disabled in all - predefined action settings. - </P -><P -> Note that some (rare) ill-configured sites don't handle requests for uncompressed - documents correctly. Broken PHP applications tend to send an empty document body, - some IIS versions only send the beginning of the content. If you enable - <TT -CLASS="LITERAL" ->prevent-compression</TT -> per default, you might want to add - exceptions for those sites. See the example for how to do that. - </P -></DD -><DT ->Example usage (sections):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Selectively turn off compression, and enable a filter -# -{ +filter{tiny-textforms} +prevent-compression } -# Match only these sites - .google. - sourceforge.net - sf.net - -# Or instead, we could set a universal default: -# -{ +prevent-compression } - / # Match all sites - -# Then maybe make exceptions for broken sites: -# -{ -prevent-compression } -.compusa.com/</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="OVERWRITE-LAST-MODIFIED" ->8.5.28. overwrite-last-modified</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Prevent yet another way to track the user's steps between sessions.</P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes the <SPAN -CLASS="QUOTE" ->"Last-Modified:"</SPAN -> HTTP server header or modifies its value. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> One of the keywords: <SPAN -CLASS="QUOTE" ->"block"</SPAN ->, <SPAN -CLASS="QUOTE" ->"reset-to-request-time"</SPAN -> - and <SPAN -CLASS="QUOTE" ->"randomize"</SPAN -> - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Removing the <SPAN -CLASS="QUOTE" ->"Last-Modified:"</SPAN -> header is useful for filter - testing, where you want to force a real reload instead of getting status - code <SPAN -CLASS="QUOTE" ->"304"</SPAN ->, which would cause the browser to reuse the old - version of the page. - </P -><P -> The <SPAN -CLASS="QUOTE" ->"randomize"</SPAN -> option overwrites the value of the - <SPAN -CLASS="QUOTE" ->"Last-Modified:"</SPAN -> header with a randomly chosen time - between the original value and the current time. In theory the server - could send each document with a different <SPAN -CLASS="QUOTE" ->"Last-Modified:"</SPAN -> - header to track visits without using cookies. <SPAN -CLASS="QUOTE" ->"Randomize"</SPAN -> - makes it impossible and the browser can still revalidate cached documents. - </P -><P -> <SPAN -CLASS="QUOTE" ->"reset-to-request-time"</SPAN -> overwrites the value of the - <SPAN -CLASS="QUOTE" ->"Last-Modified:"</SPAN -> header with the current time. You could use - this option together with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE" ->hide-if-modified-since</A -></TT -> - to further customize your random range. - </P -><P -> The preferred parameter here is <SPAN -CLASS="QUOTE" ->"randomize"</SPAN ->. It is safe - to use, as long as the time settings are more or less correct. - If the server sets the <SPAN -CLASS="QUOTE" ->"Last-Modified:"</SPAN -> header to the time - of the request, the random range becomes zero and the value stays the same. - Therefore you should later randomize it a second time with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE" ->hided-if-modified-since</A -></TT ->, - just to be sure. - </P -><P -> It is also recommended to use this action together with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-IF-NONE-MATCH" ->crunch-if-none-match</A -></TT ->. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Let the browser revalidate without being tracked across sessions -{ +hide-if-modified-since{-60} \ - +overwrite-last-modified{randomize} \ - +crunch-if-none-match} -/</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="REDIRECT" ->8.5.29. redirect</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Redirect requests to other sites. - </P -></DD -><DT ->Effect:</DT -><DD -><P -> Convinces the browser that the requested document has been moved - to another location and the browser should get it from there. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized</P -></DD -><DT ->Parameter:</DT -><DD -><P -> An absolute URL or a single pcrs command. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Requests to which this action applies are answered with a - HTTP redirect to URLs of your choosing. The new URL is - either provided as parameter, or derived by applying a - single pcrs command to the original URL. - </P -><P -> This action will be ignored if you use it together with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT ->. - It can be combined with - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FAST-REDIRECTS" ->fast-redirects{check-decoded-url}</A -></TT -> - to redirect to a decoded version of a rewritten URL. - </P -><P -> Use this action carefully, make sure not to create redirection loops - and be aware that using your own redirects might make it - possible to fingerprint your requests. - </P -><P -> In case of problems with your redirects, or simply to watch - them working, enable <A -HREF="config.html#DEBUG" ->debug 128</A ->. - </P -></DD -><DT ->Example usages:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Replace example.com's style sheet with another one -{ +redirect{http://localhost/css-replacements/example.com.css} } - example.com/stylesheet\.css - -# Create a short, easy to remember nickname for a favorite site -# (relies on the browser accept and forward invalid URLs to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->) -{ +redirect{http://www.privoxy.org/user-manual/actions-file.html} } - a - -# Always use the expanded view for Undeadly.org articles -# (Note the $ at the end of the URL pattern to make sure -# the request for the rewritten URL isn't redirected as well) -{+redirect{s@$@&mode=expanded@}} -undeadly.org/cgi\?action=article&sid=\d*$ - -# Redirect Google search requests to MSN -{+redirect{s@^http://[^/]*/search\?q=([^&]*).*@http://search.msn.com/results.aspx?q=$1@}} -.google.com/search - -# Redirect MSN search requests to Yahoo -{+redirect{s@^http://[^/]*/results\.aspx\?q=([^&]*).*@http://search.yahoo.com/search?p=$1@}} -search.msn.com//results\.aspx\?q= - -# Redirect remote requests for this manual -# to the local version delivered by Privoxy -{+redirect{s@^http://www@http://config@}} -www.privoxy.org/user-manual/</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SERVER-HEADER-FILTER" ->8.5.30. server-header-filter</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Rewrite or remove single server headers. - </P -></DD -><DT ->Effect:</DT -><DD -><P -> All server headers to which this action applies are filtered on-the-fly - through the specified regular expression based substitutions. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> The name of a server-header filter, as defined in one of the - <A -HREF="filter-file.html" ->filter files</A ->. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Server-header filters are applied to each header on its own, not to - all at once. This makes it easier to diagnose problems, but on the downside - you can't write filters that only change header x if header y's value is z. - You can do that by using tags though. - </P -><P -> Server-header filters are executed after the other header actions have finished - and use their output as input. - </P -><P -> Please refer to the <A -HREF="filter-file.html" ->filter file chapter</A -> - to learn which server-header filters are available by default, and how to - create your own. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{+server-header-filter{html-to-xml}} -example.org/xml-instance-that-is-delivered-as-html - -{+server-header-filter{xml-to-html}} -example.org/instance-that-is-delivered-as-xml-but-is-not - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SERVER-HEADER-TAGGER" ->8.5.31. server-header-tagger</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Enable or disable filters based on the Content-Type header. - </P -></DD -><DT ->Effect:</DT -><DD -><P -> Server headers to which this action applies are filtered on-the-fly through - the specified regular expression based substitutions, the result is used as - tag. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> The name of a server-header tagger, as defined in one of the - <A -HREF="filter-file.html" ->filter files</A ->. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Server-header taggers are applied to each header on its own, - and as the header isn't modified, each tagger <SPAN -CLASS="QUOTE" ->"sees"</SPAN -> - the original. - </P -><P -> Server-header taggers are executed before all other header actions - that modify server headers. Their tags can be used to control - all of the other server-header actions, the content filters - and the crunch actions (<A -HREF="actions-file.html#REDIRECT" ->redirect</A -> - and <A -HREF="actions-file.html#BLOCK" ->block</A ->). - </P -><P -> Obviously crunching based on tags created by server-header taggers - doesn't prevent the request from showing up in the server's log file. - </P -></DD -><DT ->Example usage (section):</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Tag every request with the content type declared by the server -{+server-header-tagger{content-type}} -/ - </PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SESSION-COOKIES-ONLY" ->8.5.32. session-cookies-only</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P -> Allow only temporary <SPAN -CLASS="QUOTE" ->"session"</SPAN -> cookies (for the current - browser session <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->only</I -></SPAN ->). - </P -></DD -><DT ->Effect:</DT -><DD -><P -> Deletes the <SPAN -CLASS="QUOTE" ->"expires"</SPAN -> field from <SPAN -CLASS="QUOTE" ->"Set-Cookie:"</SPAN -> - server headers. Most browsers will not store such cookies permanently and - forget them in between sessions. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Boolean.</P -></DD -><DT ->Parameter:</DT -><DD -><P -> N/A - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This is less strict than <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -></TT -> / - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -></TT -> and allows you to browse - websites that insist or rely on setting cookies, without compromising your privacy too badly. - </P -><P -> Most browsers will not permanently store cookies that have been processed by - <TT -CLASS="LITERAL" ->session-cookies-only</TT -> and will forget about them between sessions. - This makes profiling cookies useless, but won't break sites which require cookies so - that you can log in for transactions. This is generally turned on for all - sites, and is the recommended setting. - </P -><P -> It makes <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->no sense at all</I -></SPAN -> to use <TT -CLASS="LITERAL" ->session-cookies-only</TT -> - together with <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -></TT -> or - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -></TT ->. If you do, cookies - will be plainly killed. - </P -><P -> Note that it is up to the browser how it handles such cookies without an <SPAN -CLASS="QUOTE" ->"expires"</SPAN -> - field. If you use an exotic browser, you might want to try it out to be sure. - </P -><P -> This setting also has no effect on cookies that may have been stored - previously by the browser before starting <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - These would have to be removed manually. - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> also uses - the <A -HREF="actions-file.html#FILTER-CONTENT-COOKIES" ->content-cookies filter</A -> - to block some types of cookies. Content cookies are not effected by - <TT -CLASS="LITERAL" ->session-cookies-only</TT ->. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+session-cookies-only</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SET-IMAGE-BLOCKER" ->8.5.33. set-image-blocker</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Typical use:</DT -><DD -><P ->Choose the replacement for blocked images</P -></DD -><DT ->Effect:</DT -><DD -><P -> This action alone doesn't do anything noticeable. If <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN -> - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and</I -></SPAN -> <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->also</I -></SPAN -> - apply, i.e. if the request is to be blocked as an image, - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->then</I -></SPAN -> the parameter of this action decides what will be - sent as a replacement. - </P -></DD -><DT ->Type:</DT -><DD -><P ->Parameterized.</P -></DD -><DT ->Parameter:</DT -><DD -><P -></P -><UL -><LI -><P -> <SPAN -CLASS="QUOTE" ->"pattern"</SPAN -> to send a built-in checkerboard pattern image. The image is visually - decent, scales very well, and makes it obvious where banners were busted. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"blank"</SPAN -> to send a built-in transparent image. This makes banners disappear - completely, but makes it hard to detect where <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has blocked - images on a given page and complicates troubleshooting if <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - has blocked innocent images, like navigation icons. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"<TT -CLASS="REPLACEABLE" -><I ->target-url</I -></TT ->"</SPAN -> to - send a redirect to <TT -CLASS="REPLACEABLE" -><I ->target-url</I -></TT ->. You can redirect - to any image anywhere, even in your local filesystem via <SPAN -CLASS="QUOTE" ->"file:///"</SPAN -> URL. - (But note that not all browsers support redirecting to a local file system). - </P -><P -> A good application of redirects is to use special <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->-built-in - URLs, which send the built-in images, as <TT -CLASS="REPLACEABLE" -><I ->target-url</I -></TT ->. - This has the same visual effect as specifying <SPAN -CLASS="QUOTE" ->"blank"</SPAN -> or <SPAN -CLASS="QUOTE" ->"pattern"</SPAN -> in - the first place, but enables your browser to cache the replacement image, instead of requesting - it over and over again. - </P -></LI -></UL -></DD -><DT ->Notes:</DT -><DD -><P -> The URLs for the built-in images are <SPAN -CLASS="QUOTE" ->"http://config.privoxy.org/send-banner?type=<TT -CLASS="REPLACEABLE" -><I ->type</I -></TT ->"</SPAN ->, where <TT -CLASS="REPLACEABLE" -><I ->type</I -></TT -> is - either <SPAN -CLASS="QUOTE" ->"blank"</SPAN -> or <SPAN -CLASS="QUOTE" ->"pattern"</SPAN ->. - </P -><P -> There is a third (advanced) type, called <SPAN -CLASS="QUOTE" ->"auto"</SPAN ->. It is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->NOT</I -></SPAN -> to be - used in <TT -CLASS="LITERAL" ->set-image-blocker</TT ->, but meant for use from <A -HREF="filter-file.html" ->filters</A ->. - Auto will select the type of image that would have applied to the referring page, had it been an image. - </P -></DD -><DT ->Example usage:</DT -><DD -><P -> Built-in pattern: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+set-image-blocker{pattern}</PRE -></TD -></TR -></TABLE -> - </P -><P -> Redirect to the BSD daemon: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+set-image-blocker{http://www.freebsd.org/gifs/dae_up3.gif}</PRE -></TD -></TR -></TABLE -> - </P -><P -> Redirect to the built-in pattern for better caching: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" ->+set-image-blocker{http://config.privoxy.org/send-banner?type=pattern}</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="AEN4093" ->8.5.34. Summary</A -></H3 -><P -> Note that many of these actions have the potential to cause a page to - misbehave, possibly even not to display at all. There are many ways - a site designer may choose to design his site, and what HTTP header - content, and other criteria, he may depend on. There is no way to have hard - and fast rules for all sites. See the <A -HREF="appendix.html#ACTIONSANAT" ->Appendix</A -> for a brief example on troubleshooting - actions.</P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="ALIASES" ->8.6. Aliases</A -></H2 -><P -> Custom <SPAN -CLASS="QUOTE" ->"actions"</SPAN ->, known to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - as <SPAN -CLASS="QUOTE" ->"aliases"</SPAN ->, can be defined by combining other actions. - These can in turn be invoked just like the built-in actions. - Currently, an alias name can contain any character except space, tab, - <SPAN -CLASS="QUOTE" ->"="</SPAN ->, - <SPAN -CLASS="QUOTE" ->"{"</SPAN -> and <SPAN -CLASS="QUOTE" ->"}"</SPAN ->, but we <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->strongly - recommend</I -></SPAN -> that you only use <SPAN -CLASS="QUOTE" ->"a"</SPAN -> to <SPAN -CLASS="QUOTE" ->"z"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"0"</SPAN -> to <SPAN -CLASS="QUOTE" ->"9"</SPAN ->, <SPAN -CLASS="QUOTE" ->"+"</SPAN ->, and <SPAN -CLASS="QUOTE" ->"-"</SPAN ->. - Alias names are not case sensitive, and are not required to start with a - <SPAN -CLASS="QUOTE" ->"+"</SPAN -> or <SPAN -CLASS="QUOTE" ->"-"</SPAN -> sign, since they are merely textually - expanded.</P -><P -> Aliases can be used throughout the actions file, but they <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->must be - defined in a special section at the top of the file!</I -></SPAN -> - And there can only be one such section per actions file. Each actions file may - have its own alias section, and the aliases defined in it are only visible - within that file.</P -><P -> There are two main reasons to use aliases: One is to save typing for frequently - used combinations of actions, the other one is a gain in flexibility: If you - decide once how you want to handle shops by defining an alias called - <SPAN -CLASS="QUOTE" ->"shop"</SPAN ->, you can later change your policy on shops in - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->one</I -></SPAN -> place, and your changes will take effect everywhere - in the actions file where the <SPAN -CLASS="QUOTE" ->"shop"</SPAN -> alias is used. Calling aliases - by their purpose also makes your actions files more readable.</P -><P -> Currently, there is one big drawback to using aliases, though: - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s built-in web-based action file - editor honors aliases when reading the actions files, but it expands - them before writing. So the effects of your aliases are of course preserved, - but the aliases themselves are lost when you edit sections that use aliases - with it.</P -><P -> Now let's define some aliases...</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # Useful custom aliases we can use later. - # - # Note the (required!) section header line and that this section - # must be at the top of the actions file! - # - {{alias}} - - # These aliases just save typing later: - # (Note that some already use other aliases!) - # - +crunch-all-cookies = +<A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -> +<A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -> - -crunch-all-cookies = -<A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -> -<A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -> - +block-as-image = +block{Blocked image.} +handle-as-image - allow-all-cookies = -crunch-all-cookies -<A -HREF="actions-file.html#SESSION-COOKIES-ONLY" ->session-cookies-only</A -> -<A -HREF="actions-file.html#FILTER-CONTENT-COOKIES" ->filter{content-cookies}</A -> - - # These aliases define combinations of actions - # that are useful for certain types of sites: - # - fragile = -<A -HREF="actions-file.html#BLOCK" ->block</A -> -<A -HREF="actions-file.html#FILTER" ->filter</A -> -crunch-all-cookies -<A -HREF="actions-file.html#FAST-REDIRECTS" ->fast-redirects</A -> -<A -HREF="actions-file.html#HIDE-REFERER" ->hide-referrer</A -> -<A -HREF="actions-file.html#PREVENT-COMPRESSION" ->prevent-compression</A -> - - shop = -crunch-all-cookies -<A -HREF="actions-file.html#FILTER-ALL-POPUPS" ->filter{all-popups}</A -> - - # Short names for other aliases, for really lazy people ;-) - # - c0 = +crunch-all-cookies - c1 = -crunch-all-cookies</PRE -></TD -></TR -></TABLE -></P -><P -> ...and put them to use. These sections would appear in the lower part of an - actions file and define exceptions to the default actions (as specified further - up for the <SPAN -CLASS="QUOTE" ->"/"</SPAN -> pattern):</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # These sites are either very complex or very keen on - # user data and require minimal interference to work: - # - {fragile} - .office.microsoft.com - .windowsupdate.microsoft.com - # Gmail is really mail.google.com, not gmail.com - mail.google.com - - # Shopping sites: - # Allow cookies (for setting and retrieving your customer data) - # - {shop} - .quietpc.com - .worldpay.com # for quietpc.com - mybank.example.com - - # These shops require pop-ups: - # - {-filter{all-popups} -filter{unsolicited-popups}} - .dabs.com - .overclockers.co.uk</PRE -></TD -></TR -></TABLE -></P -><P -> Aliases like <SPAN -CLASS="QUOTE" ->"shop"</SPAN -> and <SPAN -CLASS="QUOTE" ->"fragile"</SPAN -> are typically used for - <SPAN -CLASS="QUOTE" ->"problem"</SPAN -> sites that require more than one action to be disabled - in order to function properly.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="ACT-EXAMPLES" ->8.7. Actions Files Tutorial</A -></H2 -><P -> The above chapters have shown <A -HREF="actions-file.html" ->which actions files - there are and how they are organized</A ->, how actions are <A -HREF="actions-file.html#ACTIONS" ->specified</A -> and <A -HREF="actions-file.html#ACTIONS-APPLY" ->applied - to URLs</A ->, how <A -HREF="actions-file.html#AF-PATTERNS" ->patterns</A -> work, and how to - define and use <A -HREF="actions-file.html#ALIASES" ->aliases</A ->. Now, let's look at an - example <TT -CLASS="FILENAME" ->match-all.action</TT ->, <TT -CLASS="FILENAME" ->default.action</TT -> - and <TT -CLASS="FILENAME" ->user.action</TT -> file and see how all these pieces come together:</P -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="AEN4157" ->8.7.1. match-all.action</A -></H3 -><P -> Remember <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all actions are disabled when matching starts</I -></SPAN ->, - so we have to explicitly enable the ones we want.</P -><P -> While the <TT -CLASS="FILENAME" ->match-all.action</TT -> file only contains a - single section, it is probably the most important one. It has only one - pattern, <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->/</TT ->"</SPAN ->, but this pattern - <A -HREF="actions-file.html#AF-PATTERNS" ->matches all URLs</A ->. Therefore, the set of - actions used in this <SPAN -CLASS="QUOTE" ->"default"</SPAN -> section <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->will - be applied to all requests as a start</I -></SPAN ->. It can be partly or - wholly overridden by other actions files like <TT -CLASS="FILENAME" ->default.action</TT -> - and <TT -CLASS="FILENAME" ->user.action</TT ->, but it will still be largely responsible - for your overall browsing experience.</P -><P -> Again, at the start of matching, all actions are disabled, so there is - no need to disable any actions here. (Remember: a <SPAN -CLASS="QUOTE" ->"+"</SPAN -> - preceding the action name enables the action, a <SPAN -CLASS="QUOTE" ->"-"</SPAN -> disables!). - Also note how this long line has been made more readable by splitting it into - multiple lines with line continuation.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ \ - +<A -HREF="actions-file.html#CHANGE-X-FORWARDED-FOR" ->change-x-forwarded-for{block}</A -> \ - +<A -HREF="actions-file.html#HIDE-FROM-HEADER" ->hide-from-header{block}</A -> \ - +<A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker{pattern}</A -> \ -} -/ # Match all URLs - </PRE -></TD -></TR -></TABLE -></P -><P -> The default behavior is now set.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="AEN4179" ->8.7.2. default.action</A -></H3 -><P -> If you aren't a developer, there's no need for you to edit the - <TT -CLASS="FILENAME" ->default.action</TT -> file. It is maintained by - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developers and if you disagree with some of the - sections, you should overrule them in your <TT -CLASS="FILENAME" ->user.action</TT ->.</P -><P -> Understanding the <TT -CLASS="FILENAME" ->default.action</TT -> file can - help you with your <TT -CLASS="FILENAME" ->user.action</TT ->, though.</P -><P -> The first section in this file is a special section for internal use - that prevents older <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> versions from reading the file:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->########################################################################## -# Settings -- Don't change! For internal Privoxy use ONLY. -########################################################################## -{{settings}} -for-privoxy-version=3.0.11</PRE -></TD -></TR -></TABLE -></P -><P -> After that comes the (optional) alias section. We'll use the example - section from the above <A -HREF="actions-file.html#ALIASES" ->chapter on aliases</A ->, - that also explains why and how aliases are used:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->########################################################################## -# Aliases -########################################################################## -{{alias}} - - # These aliases just save typing later: - # (Note that some already use other aliases!) - # - +crunch-all-cookies = +<A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -> +<A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -> - -crunch-all-cookies = -<A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -> -<A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -> - +block-as-image = +block{Blocked image.} +handle-as-image - mercy-for-cookies = -crunch-all-cookies -<A -HREF="actions-file.html#SESSION-COOKIES-ONLY" ->session-cookies-only</A -> -<A -HREF="actions-file.html#FILTER-CONTENT-COOKIES" ->filter{content-cookies}</A -> - - # These aliases define combinations of actions - # that are useful for certain types of sites: - # - fragile = -<A -HREF="actions-file.html#BLOCK" ->block</A -> -<A -HREF="actions-file.html#FILTER" ->filter</A -> -crunch-all-cookies -<A -HREF="actions-file.html#FAST-REDIRECTS" ->fast-redirects</A -> -<A -HREF="actions-file.html#HIDE-REFERER" ->hide-referrer</A -> - shop = -crunch-all-cookies -<A -HREF="actions-file.html#FILTER-ALL-POPUPS" ->filter{all-popups}</A -></PRE -></TD -></TR -></TABLE -></P -><P -> The first of our specialized sections is concerned with <SPAN -CLASS="QUOTE" ->"fragile"</SPAN -> - sites, i.e. sites that require minimum interference, because they are either - very complex or very keen on tracking you (and have mechanisms in place that - make them unusable for people who avoid being tracked). We will simply use - our pre-defined <TT -CLASS="LITERAL" ->fragile</TT -> alias instead of stating the list - of actions explicitly:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->########################################################################## -# Exceptions for sites that'll break under the default action set: -########################################################################## - -# "Fragile" Use a minimum set of actions for these sites (see alias above): -# -{ fragile } -.office.microsoft.com # surprise, surprise! -.windowsupdate.microsoft.com -mail.google.com</PRE -></TD -></TR -></TABLE -></P -><P -> Shopping sites are not as fragile, but they typically - require cookies to log in, and pop-up windows for shopping - carts or item details. Again, we'll use a pre-defined alias:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Shopping sites: -# -{ shop } -.quietpc.com -.worldpay.com # for quietpc.com -.jungle.com -.scan.co.uk</PRE -></TD -></TR -></TABLE -></P -><P -> The <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FAST-REDIRECTS" ->fast-redirects</A -></TT -> - action, which may have been enabled in <TT -CLASS="FILENAME" ->match-all.action</TT ->, - breaks some sites. So disable it for popular sites where we know it misbehaves:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ -<A -HREF="actions-file.html#FAST-REDIRECTS" ->fast-redirects</A -> } -login.yahoo.com -edit.*.yahoo.com -.google.com -.altavista.com/.*(like|url|link):http -.altavista.com/trans.*urltext=http -.nytimes.com</PRE -></TD -></TR -></TABLE -></P -><P -> It is important that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> knows which - URLs belong to images, so that <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->if</I -></SPAN -> they are to - be blocked, a substitute image can be sent, rather than an HTML page. - Contacting the remote site to find out is not an option, since it - would destroy the loading time advantage of banner blocking, and it - would feed the advertisers information about you. We can mark any - URL as an image with the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT -> action, - and marking all URLs that end in a known image file extension is a - good start:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->########################################################################## -# Images: -########################################################################## - -# Define which file types will be treated as images, in case they get -# blocked further down this file: -# -{ +<A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -> } -/.*\.(gif|jpe?g|png|bmp|ico)$</PRE -></TD -></TR -></TABLE -></P -><P -> And then there are known banner sources. They often use scripts to - generate the banners, so it won't be visible from the URL that the - request is for an image. Hence we block them <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and</I -></SPAN -> - mark them as images in one go, with the help of our - <TT -CLASS="LITERAL" ->+block-as-image</TT -> alias defined above. (We could of - course just as well use <TT -CLASS="LITERAL" ->+<A -HREF="actions-file.html#BLOCK" ->block</A -> - +<A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT -> here.) - Remember that the type of the replacement image is chosen by the - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A -></TT -> - action. Since all URLs have matched the default section with its - <TT -CLASS="LITERAL" ->+<A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A ->{pattern}</TT -> - action before, it still applies and needn't be repeated:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Known ad generators: -# -{ +block-as-image } -ar.atwola.com -.ad.doubleclick.net -.ad.*.doubleclick.net -.a.yimg.com/(?:(?!/i/).)*$ -.a[0-9].yimg.com/(?:(?!/i/).)*$ -bs*.gsanet.com -.qkimg.net</PRE -></TD -></TR -></TABLE -></P -><P -> One of the most important jobs of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is to block banners. Many of these can be <SPAN -CLASS="QUOTE" ->"blocked"</SPAN -> - by the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filter</A ->{banners-by-size}</TT -> - action, which we enabled above, and which deletes the references to banner - images from the pages while they are loaded, so the browser doesn't request - them anymore, and hence they don't need to be blocked here. But this naturally - doesn't catch all banners, and some people choose not to use filters, so we - need a comprehensive list of patterns for banner URLs here, and apply the - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> action to them.</P -><P -> First comes many generic patterns, which do most of the work, by - matching typical domain and path name components of banners. Then comes - a list of individual patterns for specific sites, which is omitted here - to keep the example short:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->########################################################################## -# Block these fine banners: -########################################################################## -{ <A -HREF="actions-file.html#BLOCK" ->+block{Banner ads.}</A -> } - -# Generic patterns: -# -ad*. -.*ads. -banner?. -count*. -/.*count(er)?\.(pl|cgi|exe|dll|asp|php[34]?) -/(?:.*/)?(publicite|werbung|rekla(ma|me|am)|annonse|maino(kset|nta|s)?)/ - -# Site-specific patterns (abbreviated): -# -.hitbox.com</PRE -></TD -></TR -></TABLE -></P -><P -> It's quite remarkable how many advertisers actually call their banner - servers ads.<TT -CLASS="REPLACEABLE" -><I ->company</I -></TT ->.com, or call the directory - in which the banners are stored simply <SPAN -CLASS="QUOTE" ->"banners"</SPAN ->. So the above - generic patterns are surprisingly effective.</P -><P -> But being very generic, they necessarily also catch URLs that we don't want - to block. The pattern <TT -CLASS="LITERAL" ->.*ads.</TT -> e.g. catches - <SPAN -CLASS="QUOTE" ->"nasty-<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->ads</I -></SPAN ->.nasty-corp.com"</SPAN -> as intended, - but also <SPAN -CLASS="QUOTE" ->"downlo<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->ads</I -></SPAN ->.sourcefroge.net"</SPAN -> or - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->ads</I -></SPAN ->l.some-provider.net."</SPAN -> So here come some - well-known exceptions to the <TT -CLASS="LITERAL" ->+<A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> - section above.</P -><P -> Note that these are exceptions to exceptions from the default! Consider the URL - <SPAN -CLASS="QUOTE" ->"downloads.sourcefroge.net"</SPAN ->: Initially, all actions are deactivated, - so it wouldn't get blocked. Then comes the defaults section, which matches the - URL, but just deactivates the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> - action once again. Then it matches <TT -CLASS="LITERAL" ->.*ads.</TT ->, an exception to the - general non-blocking policy, and suddenly - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->+block</A -></TT -> applies. And now, it'll match - <TT -CLASS="LITERAL" ->.*loads.</TT ->, where <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->-block</A -></TT -> - applies, so (unless it matches <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->again</I -></SPAN -> further down) it ends up - with no <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> action applying.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->########################################################################## -# Save some innocent victims of the above generic block patterns: -########################################################################## - -# By domain: -# -{ -<A -HREF="actions-file.html#BLOCK" ->block</A -> } -adv[io]*. # (for advogato.org and advice.*) -adsl. # (has nothing to do with ads) -adobe. # (has nothing to do with ads either) -ad[ud]*. # (adult.* and add.*) -.edu # (universities don't host banners (yet!)) -.*loads. # (downloads, uploads etc) - -# By path: -# -/.*loads/ - -# Site-specific: -# -www.globalintersec.com/adv # (adv = advanced) -www.ugu.com/sui/ugu/adv</PRE -></TD -></TR -></TABLE -></P -><P -> Filtering source code can have nasty side effects, - so make an exception for our friends at sourceforge.net, - and all paths with <SPAN -CLASS="QUOTE" ->"cvs"</SPAN -> in them. Note that - <TT -CLASS="LITERAL" ->-<A -HREF="actions-file.html#FILTER" ->filter</A -></TT -> - disables <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> filters in one fell swoop!</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Don't filter code! -# -{ -<A -HREF="actions-file.html#FILTER" ->filter</A -> } -/(.*/)?cvs -bugzilla. -developer. -wiki. -.sourceforge.net</PRE -></TD -></TR -></TABLE -></P -><P -> The actual <TT -CLASS="FILENAME" ->default.action</TT -> is of course much more - comprehensive, but we hope this example made clear how it works.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="AEN4292" ->8.7.3. user.action</A -></H3 -><P -> So far we are painting with a broad brush by setting general policies, - which would be a reasonable starting point for many people. Now, - you might want to be more specific and have customized rules that - are more suitable to your personal habits and preferences. These would - be for narrowly defined situations like your ISP or your bank, and should - be placed in <TT -CLASS="FILENAME" ->user.action</TT ->, which is parsed after all other - actions files and hence has the last word, over-riding any previously - defined actions. <TT -CLASS="FILENAME" ->user.action</TT -> is also a - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->safe</I -></SPAN -> place for your personal settings, since - <TT -CLASS="FILENAME" ->default.action</TT -> is actively maintained by the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developers and you'll probably want - to install updated versions from time to time.</P -><P -> So let's look at a few examples of things that one might typically do in - <TT -CLASS="FILENAME" ->user.action</TT ->: </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># My user.action file. <fred(a)example.com></PRE -></TD -></TR -></TABLE -></P -><P -> As <A -HREF="actions-file.html#ALIASES" ->aliases</A -> are local to the actions - file that they are defined in, you can't use the ones from - <TT -CLASS="FILENAME" ->default.action</TT ->, unless you repeat them here:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Aliases are local to the file they are defined in. -# (Re-)define aliases for this file: -# -{{alias}} -# -# These aliases just save typing later, and the alias names should -# be self explanatory. -# -+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies --crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies - allow-all-cookies = -crunch-all-cookies -session-cookies-only - allow-popups = -filter{all-popups} -+block-as-image = +block{Blocked as image.} +handle-as-image --block-as-image = -block - -# These aliases define combinations of actions that are useful for -# certain types of sites: -# -fragile = -block -crunch-all-cookies -filter -fast-redirects -hide-referrer -shop = -crunch-all-cookies allow-popups - -# Allow ads for selected useful free sites: -# -allow-ads = -block -filter{banners-by-size} -filter{banners-by-link} - -# Alias for specific file types that are text, but might have conflicting -# MIME types. We want the browser to force these to be text documents. -handle-as-text = -<A -HREF="actions-file.html#FILTER" ->filter</A -> +-<A -HREF="actions-file.html#CONTENT-TYPE-OVERWRITE" ->content-type-overwrite{text/plain}</A -> +-<A -HREF="actions-file.html#FORCE-TEXT-MODE" ->force-text-mode</A -> -<A -HREF="actions-file.html#HIDE-CONTENT-DISPOSITION" ->hide-content-disposition</A -></PRE -></TD -></TR -></TABLE -></P -><P -> Say you have accounts on some sites that you visit regularly, and - you don't want to have to log in manually each time. So you'd like - to allow persistent cookies for these sites. The - <TT -CLASS="LITERAL" ->allow-all-cookies</TT -> alias defined above does exactly - that, i.e. it disables crunching of cookies in any direction, and the - processing of cookies to make them only temporary.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ allow-all-cookies } - sourceforge.net - .yahoo.com - .msdn.microsoft.com - .redhat.com</PRE -></TD -></TR -></TABLE -></P -><P -> Your bank is allergic to some filter, but you don't know which, so you disable them all:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ -<A -HREF="actions-file.html#FILTER" ->filter</A -> } - .your-home-banking-site.com</PRE -></TD -></TR -></TABLE -></P -><P -> Some file types you may not want to filter for various reasons:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Technical documentation is likely to contain strings that might -# erroneously get altered by the JavaScript-oriented filters: -# -.tldp.org -/(.*/)?selfhtml/ - -# And this stupid host sends streaming video with a wrong MIME type, -# so that Privoxy thinks it is getting HTML and starts filtering: -# -stupid-server.example.com/</PRE -></TD -></TR -></TABLE -></P -><P -> Example of a simple <A -HREF="actions-file.html#BLOCK" ->block</A -> action. Say you've - seen an ad on your favourite page on example.com that you want to get rid of. - You have right-clicked the image, selected <SPAN -CLASS="QUOTE" ->"copy image location"</SPAN -> - and pasted the URL below while removing the leading http://, into a - <TT -CLASS="LITERAL" ->{ +block{} }</TT -> section. Note that <TT -CLASS="LITERAL" ->{ +handle-as-image - }</TT -> need not be specified, since all URLs ending in - <TT -CLASS="LITERAL" ->.gif</TT -> will be tagged as images by the general rules as set - in default.action anyway:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ +<A -HREF="actions-file.html#BLOCK" ->block</A ->{Nasty ads.} } - www.example.com/nasty-ads/sponsor\.gif - another.example.net/more/junk/here/</PRE -></TD -></TR -></TABLE -></P -><P -> The URLs of dynamically generated banners, especially from large banner - farms, often don't use the well-known image file name extensions, which - makes it impossible for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to guess - the file type just by looking at the URL. - You can use the <TT -CLASS="LITERAL" ->+block-as-image</TT -> alias defined above for - these cases. - Note that objects which match this rule but then turn out NOT to be an - image are typically rendered as a <SPAN -CLASS="QUOTE" ->"broken image"</SPAN -> icon by the - browser. Use cautiously.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ +block-as-image } - .doubleclick.net - .fastclick.net - /Realmedia/ads/ - ar.atwola.com/</PRE -></TD -></TR -></TABLE -></P -><P -> Now you noticed that the default configuration breaks Forbes Magazine, - but you were too lazy to find out which action is the culprit, and you - were again too lazy to give <A -HREF="contact.html" ->feedback</A ->, so - you just used the <TT -CLASS="LITERAL" ->fragile</TT -> alias on the site, and - -- <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->whoa!</I -></SPAN -> -- it worked. The <TT -CLASS="LITERAL" ->fragile</TT -> - aliases disables those actions that are most likely to break a site. Also, - good for testing purposes to see if it is <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - that is causing the problem or not. We later find other regular sites - that misbehave, and add those to our personalized list of troublemakers:</P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ fragile } - .forbes.com - webmail.example.com - .mybank.com</PRE -></TD -></TR -></TABLE -></P -><P -> You like the <SPAN -CLASS="QUOTE" ->"fun"</SPAN -> text replacements in <TT -CLASS="FILENAME" ->default.filter</TT ->, - but it is disabled in the distributed actions file. - So you'd like to turn it on in your private, - update-safe config, once and for all:</P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ +<A -HREF="actions-file.html#FILTER-FUN" ->filter{fun}</A -> } - / # For ALL sites!</PRE -></TD -></TR -></TABLE -></P -><P -> Note that the above is not really a good idea: There are exceptions - to the filters in <TT -CLASS="FILENAME" ->default.action</TT -> for things that - really shouldn't be filtered, like code on CVS->Web interfaces. Since - <TT -CLASS="FILENAME" ->user.action</TT -> has the last word, these exceptions - won't be valid for the <SPAN -CLASS="QUOTE" ->"fun"</SPAN -> filtering specified here.</P -><P -> You might also worry about how your favourite free websites are - funded, and find that they rely on displaying banner advertisements - to survive. So you might want to specifically allow banners for those - sites that you feel provide value to you:</P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ allow-ads } - .sourceforge.net - .slashdot.org - .osdn.net</PRE -></TD -></TR -></TABLE -> </P -><P -> Note that <TT -CLASS="LITERAL" ->allow-ads</TT -> has been aliased to - <TT -CLASS="LITERAL" ->-<A -HREF="actions-file.html#BLOCK" ->block</A -></TT ->, - <TT -CLASS="LITERAL" ->-<A -HREF="actions-file.html#FILTER-BANNERS-BY-SIZE" ->filter{banners-by-size}</A -></TT ->, and - <TT -CLASS="LITERAL" ->-<A -HREF="actions-file.html#FILTER-BANNERS-BY-LINK" ->filter{banners-by-link}</A -></TT -> above.</P -><P -> Invoke another alias here to force an over-ride of the MIME type <TT -CLASS="LITERAL" -> application/x-sh</TT -> which typically would open a download type - dialog. In my case, I want to look at the shell script, and then I can save - it should I choose to.</P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ handle-as-text } - /.*\.sh$</PRE -></TD -></TR -></TABLE -> </P -><P -> <TT -CLASS="FILENAME" ->user.action</TT -> is generally the best place to define - exceptions and additions to the default policies of - <TT -CLASS="FILENAME" ->default.action</TT ->. Some actions are safe to have their - default policies set here though. So let's set a default policy to have a - <SPAN -CLASS="QUOTE" ->"blank"</SPAN -> image as opposed to the checkerboard pattern for - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->ALL</I -></SPAN -> sites. <SPAN -CLASS="QUOTE" ->"/"</SPAN -> of course matches all URL - paths and patterns:</P -><P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->{ +<A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker{blank}</A -> } -/ # ALL sites</PRE -></TD -></TR -></TABLE -></P -></DIV -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="config.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="filter-file.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->The Main Configuration File</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Filter Files</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/appendix.html b/external/privoxy/doc/webserver/user-manual/appendix.html deleted file mode 100644 index 4df57a4..0000000 --- a/external/privoxy/doc/webserver/user-manual/appendix.html +++ /dev/null @@ -1,2187 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Appendix</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="See Also" -HREF="seealso.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="seealso.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -> </TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="APPENDIX" ->14. Appendix</A -></H1 -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="REGEX" ->14.1. Regular Expressions</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> uses Perl-style <SPAN -CLASS="QUOTE" ->"regular - expressions"</SPAN -> in its <A -HREF="actions-file.html" ->actions - files</A -> and <A -HREF="filter-file.html" ->filter file</A ->, - through the <A -HREF="http://www.pcre.org/" -TARGET="_top" ->PCRE</A -> and - <SPAN -CLASS="APPLICATION" ->PCRS</SPAN -> libraries.</P -><P -> If you are reading this, you probably don't understand what <SPAN -CLASS="QUOTE" ->"regular - expressions"</SPAN -> are, or what they can do. So this will be a very brief - introduction only. A full explanation would require a <A -HREF="http://www.oreilly.com/catalog/regex/" -TARGET="_top" ->book</A -> ;-)</P -><P -> Regular expressions provide a language to describe patterns that can be - run against strings of characters (letter, numbers, etc), to see if they - match the string or not. The patterns are themselves (sometimes complex) - strings of literal characters, combined with wild-cards, and other special - characters, called meta-characters. The <SPAN -CLASS="QUOTE" ->"meta-characters"</SPAN -> have - special meanings and are used to build complex patterns to be matched against. - Perl Compatible Regular Expressions are an especially convenient - <SPAN -CLASS="QUOTE" ->"dialect"</SPAN -> of the regular expression language.</P -><P -> To make a simple analogy, we do something similar when we use wild-card - characters when listing files with the <B -CLASS="COMMAND" ->dir</B -> command in DOS. - <TT -CLASS="LITERAL" ->*.*</TT -> matches all filenames. The <SPAN -CLASS="QUOTE" ->"special"</SPAN -> - character here is the asterisk which matches any and all characters. We can be - more specific and use <TT -CLASS="LITERAL" ->?</TT -> to match just individual - characters. So <SPAN -CLASS="QUOTE" ->"dir file?.text"</SPAN -> would match - <SPAN -CLASS="QUOTE" ->"file1.txt"</SPAN ->, <SPAN -CLASS="QUOTE" ->"file2.txt"</SPAN ->, etc. We are pattern - matching, using a similar technique to <SPAN -CLASS="QUOTE" ->"regular expressions"</SPAN ->!</P -><P -> Regular expressions do essentially the same thing, but are much, much more - powerful. There are many more <SPAN -CLASS="QUOTE" ->"special characters"</SPAN -> and ways of - building complex patterns however. Let's look at a few of the common ones, - and then some examples:</P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->.</I -></SPAN -> - Matches any single character, e.g. <SPAN -CLASS="QUOTE" ->"a"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"A"</SPAN ->, <SPAN -CLASS="QUOTE" ->"4"</SPAN ->, <SPAN -CLASS="QUOTE" ->":"</SPAN ->, or <SPAN -CLASS="QUOTE" ->"@"</SPAN ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->?</I -></SPAN -> - The preceding character or expression is matched ZERO or ONE - times. Either/or. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->+</I -></SPAN -> - The preceding character or expression is matched ONE or MORE - times. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->*</I -></SPAN -> - The preceding character or expression is matched ZERO or MORE - times. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->\</I -></SPAN -> - The <SPAN -CLASS="QUOTE" ->"escape"</SPAN -> character denotes that - the following character should be taken literally. This is used where one of the - special characters (e.g. <SPAN -CLASS="QUOTE" ->"."</SPAN ->) needs to be taken literally and - not as a special meta-character. Example: <SPAN -CLASS="QUOTE" ->"example\.com"</SPAN ->, makes - sure the period is recognized only as a period (and not expanded to its - meta-character meaning of any single character). - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->[ ]</I -></SPAN -> - Characters enclosed in brackets will be matched if - any of the enclosed characters are encountered. For instance, <SPAN -CLASS="QUOTE" ->"[0-9]"</SPAN -> - matches any numeric digit (zero through nine). As an example, we can combine - this with <SPAN -CLASS="QUOTE" ->"+"</SPAN -> to match any digit one of more times: <SPAN -CLASS="QUOTE" ->"[0-9]+"</SPAN ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->( )</I -></SPAN -> - parentheses are used to group a sub-expression, - or multiple sub-expressions. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->|</I -></SPAN -> - The <SPAN -CLASS="QUOTE" ->"bar"</SPAN -> character works like an - <SPAN -CLASS="QUOTE" ->"or"</SPAN -> conditional statement. A match is successful if the - sub-expression on either side of <SPAN -CLASS="QUOTE" ->"|"</SPAN -> matches. As an example: - <SPAN -CLASS="QUOTE" ->"/(this|that) example/"</SPAN -> uses grouping and the bar character - and would match either <SPAN -CLASS="QUOTE" ->"this example"</SPAN -> or <SPAN -CLASS="QUOTE" ->"that - example"</SPAN ->, and nothing else. - </TD -></TR -></TBODY -></TABLE -><P -></P -></P -><P -> These are just some of the ones you are likely to use when matching URLs with - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, and is a long way from a definitive - list. This is enough to get us started with a few simple examples which may - be more illuminating:</P -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><TT -CLASS="LITERAL" ->/.*/banners/.*</TT -></I -></SPAN -> - A simple example - that uses the common combination of <SPAN -CLASS="QUOTE" ->"."</SPAN -> and <SPAN -CLASS="QUOTE" ->"*"</SPAN -> to - denote any character, zero or more times. In other words, any string at all. - So we start with a literal forward slash, then our regular expression pattern - (<SPAN -CLASS="QUOTE" ->".*"</SPAN ->) another literal forward slash, the string - <SPAN -CLASS="QUOTE" ->"banners"</SPAN ->, another forward slash, and lastly another - <SPAN -CLASS="QUOTE" ->".*"</SPAN ->. We are building - a directory path here. This will match any file with the path that has a - directory named <SPAN -CLASS="QUOTE" ->"banners"</SPAN -> in it. The <SPAN -CLASS="QUOTE" ->".*"</SPAN -> matches - any characters, and this could conceivably be more forward slashes, so it - might expand into a much longer looking path. For example, this could match: - <SPAN -CLASS="QUOTE" ->"/eye/hate/spammers/banners/annoy_me_please.gif"</SPAN ->, or just - <SPAN -CLASS="QUOTE" ->"/banners/annoying.html"</SPAN ->, or almost an infinite number of other - possible combinations, just so it has <SPAN -CLASS="QUOTE" ->"banners"</SPAN -> in the path - somewhere.</P -><P -> And now something a little more complex:</P -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><TT -CLASS="LITERAL" ->/.*/adv((er)?ts?|ertis(ing|ements?))?/</TT -></I -></SPAN -> - - We have several literal forward slashes again (<SPAN -CLASS="QUOTE" ->"/"</SPAN ->), so we are - building another expression that is a file path statement. We have another - <SPAN -CLASS="QUOTE" ->".*"</SPAN ->, so we are matching against any conceivable sub-path, just so - it matches our expression. The only true literal that <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->must - match</I -></SPAN -> our pattern is <SPAN -CLASS="APPLICATION" ->adv</SPAN ->, together with - the forward slashes. What comes after the <SPAN -CLASS="QUOTE" ->"adv"</SPAN -> string is the - interesting part. </P -><P -> Remember the <SPAN -CLASS="QUOTE" ->"?"</SPAN -> means the preceding expression (either a - literal character or anything grouped with <SPAN -CLASS="QUOTE" ->"(...)"</SPAN -> in this case) - can exist or not, since this means either zero or one match. So - <SPAN -CLASS="QUOTE" ->"((er)?ts?|ertis(ing|ements?))"</SPAN -> is optional, as are the - individual sub-expressions: <SPAN -CLASS="QUOTE" ->"(er)"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"(ing|ements?)"</SPAN ->, and the <SPAN -CLASS="QUOTE" ->"s"</SPAN ->. The <SPAN -CLASS="QUOTE" ->"|"</SPAN -> - means <SPAN -CLASS="QUOTE" ->"or"</SPAN ->. We have two of those. For instance, - <SPAN -CLASS="QUOTE" ->"(ing|ements?)"</SPAN ->, can expand to match either <SPAN -CLASS="QUOTE" ->"ing"</SPAN -> - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->OR</I -></SPAN -> <SPAN -CLASS="QUOTE" ->"ements?"</SPAN ->. What is being done here, is an - attempt at matching as many variations of <SPAN -CLASS="QUOTE" ->"advertisement"</SPAN ->, and - similar, as possible. So this would expand to match just <SPAN -CLASS="QUOTE" ->"adv"</SPAN ->, - or <SPAN -CLASS="QUOTE" ->"advert"</SPAN ->, or <SPAN -CLASS="QUOTE" ->"adverts"</SPAN ->, or - <SPAN -CLASS="QUOTE" ->"advertising"</SPAN ->, or <SPAN -CLASS="QUOTE" ->"advertisement"</SPAN ->, or - <SPAN -CLASS="QUOTE" ->"advertisements"</SPAN ->. You get the idea. But it would not match - <SPAN -CLASS="QUOTE" ->"advertizements"</SPAN -> (with a <SPAN -CLASS="QUOTE" ->"z"</SPAN ->). We could fix that by - changing our regular expression to: - <SPAN -CLASS="QUOTE" ->"/.*/adv((er)?ts?|erti(s|z)(ing|ements?))?/"</SPAN ->, which would then match - either spelling.</P -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" -><TT -CLASS="LITERAL" ->/.*/advert[0-9]+\.(gif|jpe?g)</TT -></I -></SPAN -> - Again - another path statement with forward slashes. Anything in the square brackets - <SPAN -CLASS="QUOTE" ->"[ ]"</SPAN -> can be matched. This is using <SPAN -CLASS="QUOTE" ->"0-9"</SPAN -> as a - shorthand expression to mean any digit one through nine. It is the same as - saying <SPAN -CLASS="QUOTE" ->"0123456789"</SPAN ->. So any digit matches. The <SPAN -CLASS="QUOTE" ->"+"</SPAN -> - means one or more of the preceding expression must be included. The preceding - expression here is what is in the square brackets -- in this case, any digit - one through nine. Then, at the end, we have a grouping: <SPAN -CLASS="QUOTE" ->"(gif|jpe?g)"</SPAN ->. - This includes a <SPAN -CLASS="QUOTE" ->"|"</SPAN ->, so this needs to match the expression on - either side of that bar character also. A simple <SPAN -CLASS="QUOTE" ->"gif"</SPAN -> on one side, and the other - side will in turn match either <SPAN -CLASS="QUOTE" ->"jpeg"</SPAN -> or <SPAN -CLASS="QUOTE" ->"jpg"</SPAN ->, - since the <SPAN -CLASS="QUOTE" ->"?"</SPAN -> means the letter <SPAN -CLASS="QUOTE" ->"e"</SPAN -> is optional and - can be matched once or not at all. So we are building an expression here to - match image GIF or JPEG type image file. It must include the literal - string <SPAN -CLASS="QUOTE" ->"advert"</SPAN ->, then one or more digits, and a <SPAN -CLASS="QUOTE" ->"."</SPAN -> - (which is now a literal, and not a special character, since it is escaped - with <SPAN -CLASS="QUOTE" ->"\"</SPAN ->), and lastly either <SPAN -CLASS="QUOTE" ->"gif"</SPAN ->, or - <SPAN -CLASS="QUOTE" ->"jpeg"</SPAN ->, or <SPAN -CLASS="QUOTE" ->"jpg"</SPAN ->. Some possible matches would - include: <SPAN -CLASS="QUOTE" ->"//advert1.jpg"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"/nasty/ads/advert1234.gif"</SPAN ->, - <SPAN -CLASS="QUOTE" ->"/banners/from/hell/advert99.jpg"</SPAN ->. It would not match - <SPAN -CLASS="QUOTE" ->"advert1.gif"</SPAN -> (no leading slash), or - <SPAN -CLASS="QUOTE" ->"/adverts232.jpg"</SPAN -> (the expression does not include an - <SPAN -CLASS="QUOTE" ->"s"</SPAN ->), or <SPAN -CLASS="QUOTE" ->"/advert1.jsp"</SPAN -> (<SPAN -CLASS="QUOTE" ->"jsp"</SPAN -> is not - in the expression anywhere).</P -><P -> We are barely scratching the surface of regular expressions here so that you - can understand the default <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - configuration files, and maybe use this knowledge to customize your own - installation. There is much, much more that can be done with regular - expressions. Now that you know enough to get started, you can learn more on - your own :/</P -><P -> More reading on Perl Compatible Regular expressions: - <A -HREF="http://perldoc.perl.org/perlre.html" -TARGET="_top" ->http://perldoc.perl.org/perlre.html</A -></P -><P -> For information on regular expression based substitutions and their applications - in filters, please see the <A -HREF="filter-file.html" ->filter file tutorial</A -> - in this manual.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN5174" ->14.2. Privoxy's Internal Pages</A -></H2 -><P -> Since <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> proxies each requested - web page, it is easy for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to - trap certain special URLs. In this way, we can talk directly to - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, and see how it is - configured, see how our rules are being applied, change these - rules and other configuration options, and even turn - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> filtering off, all with - a web browser.</P -><P -> The URLs listed below are the special ones that allow direct access - to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. Of course, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> must be running to access these. If - not, you will get a friendly error message. Internet access is not - necessary either.</P -><P -> <P -></P -><UL -><LI -><P -> - Privoxy main page: - </P -><A -NAME="AEN5188" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> - </P -></BLOCKQUOTE -><P -> There is a shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A -> (But it - doesn't provide a fall-back to a real page, in case the request is not - sent through <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->) - </P -></LI -><LI -><P -> - Show information about the current configuration, including viewing and - editing of actions files: - </P -><A -NAME="AEN5196" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A -> - </P -></BLOCKQUOTE -></LI -><LI -><P -> - Show the source code version numbers: - </P -><A -NAME="AEN5201" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/show-version" -TARGET="_top" ->http://config.privoxy.org/show-version</A -> - </P -></BLOCKQUOTE -></LI -><LI -><P -> - Show the browser's request headers: - </P -><A -NAME="AEN5206" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/show-request" -TARGET="_top" ->http://config.privoxy.org/show-request</A -> - </P -></BLOCKQUOTE -></LI -><LI -><P -> - Show which actions apply to a URL and why: - </P -><A -NAME="AEN5211" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/show-url-info" -TARGET="_top" ->http://config.privoxy.org/show-url-info</A -> - </P -></BLOCKQUOTE -></LI -><LI -><P -> - Toggle Privoxy on or off. This feature can be turned off/on in the main - <TT -CLASS="FILENAME" ->config</TT -> file. When toggled <SPAN -CLASS="QUOTE" ->"off"</SPAN ->, <SPAN -CLASS="QUOTE" ->"Privoxy"</SPAN -> - continues to run, but only as a pass-through proxy, with no actions taking - place: - </P -><A -NAME="AEN5219" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/toggle" -TARGET="_top" ->http://config.privoxy.org/toggle</A -> - </P -></BLOCKQUOTE -><P -> Short cuts. Turn off, then on: - </P -><A -NAME="AEN5223" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/toggle?set=disable" -TARGET="_top" ->http://config.privoxy.org/toggle?set=disable</A -> - </P -></BLOCKQUOTE -><A -NAME="AEN5226" -></A -><BLOCKQUOTE -CLASS="BLOCKQUOTE" -><P -> - <A -HREF="http://config.privoxy.org/toggle?set=enable" -TARGET="_top" ->http://config.privoxy.org/toggle?set=enable</A -> - </P -></BLOCKQUOTE -></LI -></UL -></P -><P -> These may be bookmarked for quick reference. See next.</P -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="BOOKMARKLETS" ->14.2.1. Bookmarklets</A -></H3 -><P -> Below are some <SPAN -CLASS="QUOTE" ->"bookmarklets"</SPAN -> to allow you to easily access a - <SPAN -CLASS="QUOTE" ->"mini"</SPAN -> version of some of <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - special pages. They are designed for MS Internet Explorer, but should work - equally well in Netscape, Mozilla, and other browsers which support - JavaScript. They are designed to run directly from your bookmarks - not by - clicking the links below (although that should work for testing).</P -><P -> To save them, right-click the link and choose <SPAN -CLASS="QUOTE" ->"Add to Favorites"</SPAN -> - (IE) or <SPAN -CLASS="QUOTE" ->"Add Bookmark"</SPAN -> (Netscape). You will get a warning that - the bookmark <SPAN -CLASS="QUOTE" ->"may not be safe"</SPAN -> - just click OK. Then you can run the - Bookmarklet directly from your favorites/bookmarks. For even faster access, - you can put them on the <SPAN -CLASS="QUOTE" ->"Links"</SPAN -> bar (IE) or the <SPAN -CLASS="QUOTE" ->"Personal - Toolbar"</SPAN -> (Netscape), and run them with a single click. </P -><P -> <P -></P -><UL -><LI -><P -> <A -HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=enabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());" -TARGET="_top" ->Privoxy - Enable</A -> - </P -></LI -><LI -><P -> <A -HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=disabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());" -TARGET="_top" ->Privoxy - Disable</A -> - </P -></LI -><LI -><P -> <A -HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=toggle','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());" -TARGET="_top" ->Privoxy - Toggle Privoxy</A -> (Toggles between enabled and disabled) - </P -></LI -><LI -><P -> <A -HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y','ijbstatus','width=250,height=2,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());" -TARGET="_top" ->Privoxy- View Status</A -> - </P -></LI -><LI -><P -> <A -HREF="javascript:void(window.open('http://config.privoxy.org/show-url-info?url='+escape(location.href),'Why').focus());" -TARGET="_top" ->Privoxy - Why?</A -> - </P -></LI -></UL -></P -><P -> Credit: The site which gave us the general idea for these bookmarklets is - <A -HREF="http://www.bookmarklets.com/" -TARGET="_top" ->www.bookmarklets.com</A ->. They - have more information about bookmarklets. </P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CHAIN" ->14.3. Chain of Events</A -></H2 -><P -> Let's take a quick look at how some of <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - core features are triggered, and the ensuing sequence of events when a web - page is requested by your browser:</P -><P -> <P -></P -><UL -><LI -><P -> First, your web browser requests a web page. The browser knows to send - the request to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, which will in turn, - relay the request to the remote web server after passing the following - tests: - </P -></LI -><LI -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> traps any request for its own internal CGI - pages (e.g <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->) and sends the CGI page back to the browser. - </P -></LI -><LI -><P -> Next, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> checks to see if the URL - matches any <A -HREF="actions-file.html#BLOCK" -><SPAN -CLASS="QUOTE" ->"+block"</SPAN -></A -> patterns. If - so, the URL is then blocked, and the remote web server will not be contacted. - <A -HREF="actions-file.html#HANDLE-AS-IMAGE" -><SPAN -CLASS="QUOTE" ->"+handle-as-image"</SPAN -></A -> - and - <A -HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT" -><SPAN -CLASS="QUOTE" ->"+handle-as-empty-document"</SPAN -></A -> - are then checked, and if there is no match, an - HTML <SPAN -CLASS="QUOTE" ->"BLOCKED"</SPAN -> page is sent back to the browser. Otherwise, if - it does match, an image is returned for the former, and an empty text - document for the latter. The type of image would depend on the setting of - <A -HREF="actions-file.html#SET-IMAGE-BLOCKER" -><SPAN -CLASS="QUOTE" ->"+set-image-blocker"</SPAN -></A -> - (blank, checkerboard pattern, or an HTTP redirect to an image elsewhere). - </P -></LI -><LI -><P -> Untrusted URLs are blocked. If URLs are being added to the - <TT -CLASS="FILENAME" ->trust</TT -> file, then that is done. - </P -></LI -><LI -><P -> If the URL pattern matches the <A -HREF="actions-file.html#FAST-REDIRECTS" -><SPAN -CLASS="QUOTE" ->"+fast-redirects"</SPAN -></A -> action, - it is then processed. Unwanted parts of the requested URL are stripped. - </P -></LI -><LI -><P -> Now the rest of the client browser's request headers are processed. If any - of these match any of the relevant actions (e.g. <A -HREF="actions-file.html#HIDE-USER-AGENT" -><SPAN -CLASS="QUOTE" ->"+hide-user-agent"</SPAN -></A ->, - etc.), headers are suppressed or forged as determined by these actions and - their parameters. - </P -></LI -><LI -><P -> Now the web server starts sending its response back (i.e. typically a web - page). - </P -></LI -><LI -><P -> First, the server headers are read and processed to determine, among other - things, the MIME type (document type) and encoding. The headers are then - filtered as determined by the - <A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" -><SPAN -CLASS="QUOTE" ->"+crunch-incoming-cookies"</SPAN -></A ->, - <A -HREF="actions-file.html#SESSION-COOKIES-ONLY" -><SPAN -CLASS="QUOTE" ->"+session-cookies-only"</SPAN -></A ->, - and <A -HREF="actions-file.html#DOWNGRADE-HTTP-VERSION" -><SPAN -CLASS="QUOTE" ->"+downgrade-http-version"</SPAN -></A -> - actions. - </P -></LI -><LI -><P -> If any <A -HREF="actions-file.html#FILTER" -><SPAN -CLASS="QUOTE" ->"+filter"</SPAN -></A -> action - or <A -HREF="actions-file.html#DEANIMATE-GIFS" -><SPAN -CLASS="QUOTE" ->"+deanimate-gifs"</SPAN -></A -> - action applies (and the document type fits the action), the rest of the page is - read into memory (up to a configurable limit). Then the filter rules (from - <TT -CLASS="FILENAME" ->default.filter</TT -> and any other filter files) are - processed against the buffered content. Filters are applied in the order - they are specified in one of the filter files. Animated GIFs, if present, - are reduced to either the first or last frame, depending on the action - setting.The entire page, which is now filtered, is then sent by - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> back to your browser. - </P -><P -> If neither a <A -HREF="actions-file.html#FILTER" -><SPAN -CLASS="QUOTE" ->"+filter"</SPAN -></A -> action - or <A -HREF="actions-file.html#DEANIMATE-GIFS" -><SPAN -CLASS="QUOTE" ->"+deanimate-gifs"</SPAN -></A -> - matches, then <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> passes the raw data through - to the client browser as it becomes available. - </P -></LI -><LI -><P -> As the browser receives the now (possibly filtered) page content, it - reads and then requests any URLs that may be embedded within the page - source, e.g. ad images, stylesheets, JavaScript, other HTML documents (e.g. - frames), sounds, etc. For each of these objects, the browser issues a - separate request (this is easily viewable in <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - logs). And each such request is in turn processed just as above. Note that a - complex web page will have many, many such embedded URLs. If these - secondary requests are to a different server, then quite possibly a very - differing set of actions is triggered. - </P -></LI -></UL -></P -><P -> NOTE: This is somewhat of a simplistic overview of what happens with each URL - request. For the sake of brevity and simplicity, we have focused on - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> core features only.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="ACTIONSANAT" ->14.4. Troubleshooting: Anatomy of an Action</A -></H2 -><P -> The way <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> applies - <A -HREF="actions-file.html#ACTIONS" ->actions</A -> and <A -HREF="actions-file.html#FILTER" ->filters</A -> - to any given URL can be complex, and not always so - easy to understand what is happening. And sometimes we need to be able to - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->see</I -></SPAN -> just what <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is - doing. Especially, if something <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is doing - is causing us a problem inadvertently. It can be a little daunting to look at - the actions and filters files themselves, since they tend to be filled with - <A -HREF="appendix.html#REGEX" ->regular expressions</A -> whose consequences are not - always so obvious. </P -><P -> One quick test to see if <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is causing a problem - or not, is to disable it temporarily. This should be the first troubleshooting - step. See <A -HREF="appendix.html#BOOKMARKLETS" ->the Bookmarklets</A -> section on a quick - and easy way to do this (be sure to flush caches afterward!). Looking at the - logs is a good idea too. (Note that both the toggle feature and logging are - enabled via <TT -CLASS="FILENAME" ->config</TT -> file settings, and may need to be - turned <SPAN -CLASS="QUOTE" ->"on"</SPAN ->.)</P -><P -> Another easy troubleshooting step to try is if you have done any - customization of your installation, revert back to the installed - defaults and see if that helps. There are times the developers get complaints - about one thing or another, and the problem is more related to a customized - configuration issue.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> also provides the - <A -HREF="http://config.privoxy.org/show-url-info" -TARGET="_top" ->http://config.privoxy.org/show-url-info</A -> - page that can show us very specifically how <SPAN -CLASS="APPLICATION" ->actions</SPAN -> - are being applied to any given URL. This is a big help for troubleshooting.</P -><P -> First, enter one URL (or partial URL) at the prompt, and then - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will tell us - how the current configuration will handle it. This will not - help with filtering effects (i.e. the <A -HREF="actions-file.html#FILTER" -><SPAN -CLASS="QUOTE" ->"+filter"</SPAN -></A -> action) from - one of the filter files since this is handled very - differently and not so easy to trap! It also will not tell you about any other - URLs that may be embedded within the URL you are testing. For instance, images - such as ads are expressed as URLs within the raw page source of HTML pages. So - you will only get info for the actual URL that is pasted into the prompt area - -- not any sub-URLs. If you want to know about embedded URLs like ads, you - will have to dig those out of the HTML source. Use your browser's <SPAN -CLASS="QUOTE" ->"View - Page Source"</SPAN -> option for this. Or right click on the ad, and grab the - URL.</P -><P -> Let's try an example, <A -HREF="http://google.com" -TARGET="_top" ->google.com</A ->, - and look at it one section at a time in a sample configuration (your real - configuration may vary):</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> Matches for http://www.google.com: - - In file: default.action <SPAN -CLASS="GUIBUTTON" ->[ View ]</SPAN -> <SPAN -CLASS="GUIBUTTON" ->[ Edit ]</SPAN -> - - {+change-x-forwarded-for{block} - +deanimate-gifs {last} - +fast-redirects {check-decoded-url} - +filter {refresh-tags} - +filter {img-reorder} - +filter {banners-by-size} - +filter {webbugs} - +filter {jumping-windows} - +filter {ie-exploits} - +hide-from-header {block} - +hide-referrer {forge} - +session-cookies-only - +set-image-blocker {pattern} -/ - - { -session-cookies-only } - .google.com - - { -fast-redirects } - .google.com - -In file: user.action <SPAN -CLASS="GUIBUTTON" ->[ View ]</SPAN -> <SPAN -CLASS="GUIBUTTON" ->[ Edit ]</SPAN -> -(no matches in this file) </PRE -></TD -></TR -></TABLE -></P -><P -> This is telling us how we have defined our - <A -HREF="actions-file.html#ACTIONS" -><SPAN -CLASS="QUOTE" ->"actions"</SPAN -></A ->, and - which ones match for our test case, <SPAN -CLASS="QUOTE" ->"google.com"</SPAN ->. - Displayed is all the actions that are available to us. Remember, - the <TT -CLASS="LITERAL" ->+</TT -> sign denotes <SPAN -CLASS="QUOTE" ->"on"</SPAN ->. <TT -CLASS="LITERAL" ->-</TT -> - denotes <SPAN -CLASS="QUOTE" ->"off"</SPAN ->. So some are <SPAN -CLASS="QUOTE" ->"on"</SPAN -> here, but many - are <SPAN -CLASS="QUOTE" ->"off"</SPAN ->. Each example we try may provide a slightly different - end result, depending on our configuration directives.</P -><P -> The first listing - is for our <TT -CLASS="FILENAME" ->default.action</TT -> file. The large, multi-line - listing, is how the actions are set to match for all URLs, i.e. our default - settings. If you look at your <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> file, this would be the - section just below the <SPAN -CLASS="QUOTE" ->"aliases"</SPAN -> section near the top. This - will apply to all URLs as signified by the single forward slash at the end - of the listing -- <SPAN -CLASS="QUOTE" ->" / "</SPAN ->.</P -><P -> But we have defined additional actions that would be exceptions to these general - rules, and then we list specific URLs (or patterns) that these exceptions - would apply to. Last match wins. Just below this then are two explicit - matches for <SPAN -CLASS="QUOTE" ->".google.com"</SPAN ->. The first is negating our previous - cookie setting, which was for <A -HREF="actions-file.html#SESSION-COOKIES-ONLY" -><SPAN -CLASS="QUOTE" ->"+session-cookies-only"</SPAN -></A -> - (i.e. not persistent). So we will allow persistent cookies for google, at - least that is how it is in this example. The second turns - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->off</I -></SPAN -> any <A -HREF="actions-file.html#FAST-REDIRECTS" -><SPAN -CLASS="QUOTE" ->"+fast-redirects"</SPAN -></A -> - action, allowing this to take place unmolested. Note that there is a leading - dot here -- <SPAN -CLASS="QUOTE" ->".google.com"</SPAN ->. This will match any hosts and - sub-domains, in the google.com domain also, such as - <SPAN -CLASS="QUOTE" ->"www.google.com"</SPAN -> or <SPAN -CLASS="QUOTE" ->"mail.google.com"</SPAN ->. But it would not - match <SPAN -CLASS="QUOTE" ->"www.google.de"</SPAN ->! So, apparently, we have these two actions - defined as exceptions to the general rules at the top somewhere in the lower - part of our <TT -CLASS="FILENAME" ->default.action</TT -> file, and - <SPAN -CLASS="QUOTE" ->"google.com"</SPAN -> is referenced somewhere in these latter sections.</P -><P -> Then, for our <TT -CLASS="FILENAME" ->user.action</TT -> file, we again have no hits. - So there is nothing google-specific that we might have added to our own, local - configuration. If there was, those actions would over-rule any actions from - previously processed files, such as <TT -CLASS="FILENAME" ->default.action</TT ->. - <TT -CLASS="FILENAME" ->user.action</TT -> typically has the last word. This is the - best place to put hard and fast exceptions,</P -><P -> And finally we pull it all together in the bottom section and summarize how - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is applying all its <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> - to <SPAN -CLASS="QUOTE" ->"google.com"</SPAN ->:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> Final results: - - -add-header - -block - +change-x-forwarded-for{block} - -client-header-filter{hide-tor-exit-notation} - -content-type-overwrite - -crunch-client-header - -crunch-if-none-match - -crunch-incoming-cookies - -crunch-outgoing-cookies - -crunch-server-header - +deanimate-gifs {last} - -downgrade-http-version - -fast-redirects - -filter {js-events} - -filter {content-cookies} - -filter {all-popups} - -filter {banners-by-link} - -filter {tiny-textforms} - -filter {frameset-borders} - -filter {demoronizer} - -filter {shockwave-flash} - -filter {quicktime-kioskmode} - -filter {fun} - -filter {crude-parental} - -filter {site-specifics} - -filter {js-annoyances} - -filter {html-annoyances} - +filter {refresh-tags} - -filter {unsolicited-popups} - +filter {img-reorder} - +filter {banners-by-size} - +filter {webbugs} - +filter {jumping-windows} - +filter {ie-exploits} - -filter {google} - -filter {yahoo} - -filter {msn} - -filter {blogspot} - -filter {no-ping} - -force-text-mode - -handle-as-empty-document - -handle-as-image - -hide-accept-language - -hide-content-disposition - +hide-from-header {block} - -hide-if-modified-since - +hide-referrer {forge} - -hide-user-agent - -limit-connect - -overwrite-last-modified - -prevent-compression - -redirect - -server-header-filter{xml-to-html} - -server-header-filter{html-to-xml} - -session-cookies-only - +set-image-blocker {pattern} </PRE -></TD -></TR -></TABLE -></P -><P -> Notice the only difference here to the previous listing, is to - <SPAN -CLASS="QUOTE" ->"fast-redirects"</SPAN -> and <SPAN -CLASS="QUOTE" ->"session-cookies-only"</SPAN ->, - which are activated specifically for this site in our configuration, - and thus show in the <SPAN -CLASS="QUOTE" ->"Final Results"</SPAN ->.</P -><P -> Now another example, <SPAN -CLASS="QUOTE" ->"ad.doubleclick.net"</SPAN ->:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { +block{Domains starts with "ad"} } - ad*. - - { +block{Domain contains "ad"} } - .ad. - - { +block{Doubleclick banner server} +handle-as-image } - .[a-vx-z]*.doubleclick.net</PRE -></TD -></TR -></TABLE -></P -><P -> We'll just show the interesting part here - the explicit matches. It is - matched three different times. Two <SPAN -CLASS="QUOTE" ->"+block{}"</SPAN -> sections, - and a <SPAN -CLASS="QUOTE" ->"+block{} +handle-as-image"</SPAN ->, - which is the expanded form of one of our aliases that had been defined as: - <SPAN -CLASS="QUOTE" ->"+block-as-image"</SPAN ->. (<A -HREF="actions-file.html#ALIASES" -><SPAN -CLASS="QUOTE" ->"Aliases"</SPAN -></A -> are defined in - the first section of the actions file and typically used to combine more - than one action.)</P -><P -> Any one of these would have done the trick and blocked this as an unwanted - image. This is unnecessarily redundant since the last case effectively - would also cover the first. No point in taking chances with these guys - though ;-) Note that if you want an ad or obnoxious - URL to be invisible, it should be defined as <SPAN -CLASS="QUOTE" ->"ad.doubleclick.net"</SPAN -> - is done here -- as both a <A -HREF="actions-file.html#BLOCK" -><SPAN -CLASS="QUOTE" ->"+block{}"</SPAN -></A -> - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and</I -></SPAN -> an - <A -HREF="actions-file.html#HANDLE-AS-IMAGE" -><SPAN -CLASS="QUOTE" ->"+handle-as-image"</SPAN -></A ->. - The custom alias <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->+block-as-image</TT ->"</SPAN -> just - simplifies the process and make it more readable.</P -><P -> One last example. Let's try <SPAN -CLASS="QUOTE" ->"http://www.example.net/adsl/HOWTO/"</SPAN ->. - This one is giving us problems. We are getting a blank page. Hmmm ...</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> Matches for http://www.example.net/adsl/HOWTO/: - - In file: default.action <SPAN -CLASS="GUIBUTTON" ->[ View ]</SPAN -> <SPAN -CLASS="GUIBUTTON" ->[ Edit ]</SPAN -> - - {-add-header - -block - +change-x-forwarded-for{block} - -client-header-filter{hide-tor-exit-notation} - -content-type-overwrite - -crunch-client-header - -crunch-if-none-match - -crunch-incoming-cookies - -crunch-outgoing-cookies - -crunch-server-header - +deanimate-gifs - -downgrade-http-version - +fast-redirects {check-decoded-url} - -filter {js-events} - -filter {content-cookies} - -filter {all-popups} - -filter {banners-by-link} - -filter {tiny-textforms} - -filter {frameset-borders} - -filter {demoronizer} - -filter {shockwave-flash} - -filter {quicktime-kioskmode} - -filter {fun} - -filter {crude-parental} - -filter {site-specifics} - -filter {js-annoyances} - -filter {html-annoyances} - +filter {refresh-tags} - -filter {unsolicited-popups} - +filter {img-reorder} - +filter {banners-by-size} - +filter {webbugs} - +filter {jumping-windows} - +filter {ie-exploits} - -filter {google} - -filter {yahoo} - -filter {msn} - -filter {blogspot} - -filter {no-ping} - -force-text-mode - -handle-as-empty-document - -handle-as-image - -hide-accept-language - -hide-content-disposition - +hide-from-header{block} - +hide-referer{forge} - -hide-user-agent - -overwrite-last-modified - +prevent-compression - -redirect - -server-header-filter{xml-to-html} - -server-header-filter{html-to-xml} - +session-cookies-only - +set-image-blocker{blank} } - / - - { +block{Path contains "ads".} +handle-as-image } - /ads</PRE -></TD -></TR -></TABLE -></P -><P -> Ooops, the <SPAN -CLASS="QUOTE" ->"/adsl/"</SPAN -> is matching <SPAN -CLASS="QUOTE" ->"/ads"</SPAN -> in our - configuration! But we did not want this at all! Now we see why we get the - blank page. It is actually triggering two different actions here, and - the effects are aggregated so that the URL is blocked, and <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is told - to treat the block as if it were an image. But this is, of course, all wrong. - We could now add a new action below this (or better in our own - <TT -CLASS="FILENAME" ->user.action</TT -> file) that explicitly - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->un</I -></SPAN -> blocks ( - <A -HREF="actions-file.html#BLOCK" -><SPAN -CLASS="QUOTE" ->"{-block}"</SPAN -></A ->) paths with - <SPAN -CLASS="QUOTE" ->"adsl"</SPAN -> in them (remember, last match in the configuration - wins). There are various ways to handle such exceptions. Example:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { -block } - /adsl</PRE -></TD -></TR -></TABLE -></P -><P -> Now the page displays ;-) - Remember to flush your browser's caches when making these kinds of changes to - your configuration to insure that you get a freshly delivered page! Or, try - using <TT -CLASS="LITERAL" ->Shift+Reload</TT ->.</P -><P -> But now what about a situation where we get no explicit matches like - we did with:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { +block{Path starts with "ads".} +handle-as-image } - /ads</PRE -></TD -></TR -></TABLE -></P -><P -> That actually was very helpful and pointed us quickly to where the problem - was. If you don't get this kind of match, then it means one of the default - rules in the first section of <TT -CLASS="FILENAME" ->default.action</TT -> is causing - the problem. This would require some guesswork, and maybe a little trial and - error to isolate the offending rule. One likely cause would be one of the - <A -HREF="actions-file.html#FILTER" -><SPAN -CLASS="QUOTE" ->"+filter"</SPAN -></A -> actions. - These tend to be harder to troubleshoot. - Try adding the URL for the site to one of aliases that turn off - <A -HREF="actions-file.html#FILTER" -><SPAN -CLASS="QUOTE" ->"+filter"</SPAN -></A ->:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { shop } - .quietpc.com - .worldpay.com # for quietpc.com - .jungle.com - .scan.co.uk - .forbes.com</PRE -></TD -></TR -></TABLE -></P -><P -> <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->{ shop }</TT ->"</SPAN -> is an <SPAN -CLASS="QUOTE" ->"alias"</SPAN -> that expands to - <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->{ -filter -session-cookies-only }</TT ->"</SPAN ->. - Or you could do your own exception to negate filtering:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { -filter } - # Disable ALL filter actions for sites in this section - .forbes.com - developer.ibm.com - localhost</PRE -></TD -></TR -></TABLE -></P -><P -> This would turn off all filtering for these sites. This is best - put in <TT -CLASS="FILENAME" ->user.action</TT ->, for local site - exceptions. Note that when a simple domain pattern is used by itself (without - the subsequent path portion), all sub-pages within that domain are included - automatically in the scope of the action.</P -><P -> Images that are inexplicably being blocked, may well be hitting the -<A -HREF="actions-file.html#FILTER-BANNERS-BY-SIZE" -><SPAN -CLASS="QUOTE" ->"+filter{banners-by-size}"</SPAN -></A -> - rule, which assumes - that images of certain sizes are ad banners (works well - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->most of the time</I -></SPAN -> since these tend to be standardized).</P -><P -> <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->{ fragile }</TT ->"</SPAN -> is an alias that disables most - actions that are the most likely to cause trouble. This can be used as a - last resort for problem sites. </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> { fragile } - # Handle with care: easy to break - mail.google. - mybank.example.com</PRE -></TD -></TR -></TABLE -></P -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Remember to flush caches!</I -></SPAN -> Note that the - <TT -CLASS="LITERAL" ->mail.google</TT -> reference lacks the TLD portion (e.g. - <SPAN -CLASS="QUOTE" ->".com"</SPAN ->). This will effectively match any TLD with - <TT -CLASS="LITERAL" ->google</TT -> in it, such as <TT -CLASS="LITERAL" ->mail.google.de.</TT ->, - just as an example.</P -><P -> - If this still does not work, you will have to go through the remaining - actions one by one to find which one(s) is causing the problem.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="seealso.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -> </TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->See Also</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -> </TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/config.html b/external/privoxy/doc/webserver/user-manual/config.html deleted file mode 100644 index 05e19b3..0000000 --- a/external/privoxy/doc/webserver/user-manual/config.html +++ /dev/null @@ -1,4121 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->The Main Configuration File</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Privoxy Configuration" -HREF="configuration.html"><LINK -REL="NEXT" -TITLE="Actions Files" -HREF="actions-file.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="configuration.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="actions-file.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CONFIG" ->7. The Main Configuration File</A -></H1 -><P -> Again, the main configuration file is named <TT -CLASS="FILENAME" ->config</TT -> on - Linux/Unix/BSD and OS/2, and <TT -CLASS="FILENAME" ->config.txt</TT -> on Windows. - Configuration lines consist of an initial keyword followed by a list of - values, all separated by whitespace (any number of spaces or tabs). For - example:</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->confdir /etc/privoxy</I -></SPAN -></P -> - </TT -> </P -><P -> Assigns the value <TT -CLASS="LITERAL" ->/etc/privoxy</TT -> to the option - <TT -CLASS="LITERAL" ->confdir</TT -> and thus indicates that the configuration - directory is named <SPAN -CLASS="QUOTE" ->"/etc/privoxy/"</SPAN ->.</P -><P -> All options in the config file except for <TT -CLASS="LITERAL" ->confdir</TT -> and - <TT -CLASS="LITERAL" ->logdir</TT -> are optional. Watch out in the below description - for what happens if you leave them unset.</P -><P -> The main config file controls all aspects of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s - operation that are not location dependent (i.e. they apply universally, no matter - where you may be surfing).</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="LOCAL-SET-UP" ->7.1. Local Set-up Documentation</A -></H2 -><P -> If you intend to operate <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> for more users - than just yourself, it might be a good idea to let them know how to reach - you, what you block and why you do that, your policies, etc. - </P -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="USER-MANUAL" ->7.1.1. user-manual</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Location of the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> User Manual. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->A fully qualified URI</P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> <A -HREF="http://www.privoxy.org/user-manual/" -TARGET="_top" ->http://www.privoxy.org/<TT -CLASS="REPLACEABLE" -><I ->version</I -></TT ->/user-manual/</A -> - will be used, where <TT -CLASS="REPLACEABLE" -><I ->version</I -></TT -> is the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The User Manual URI is the single best source of information on - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, and is used for help links from some - of the internal CGI pages. The manual itself is normally packaged with the - binary distributions, so you probably want to set this to a locally - installed copy. - </P -><P -> Examples: - </P -><P -> The best all purpose solution is simply to put the full local - <TT -CLASS="LITERAL" ->PATH</TT -> to where the <I -CLASS="CITETITLE" ->User Manual</I -> is - located: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> user-manual /usr/share/doc/privoxy/user-manual</PRE -></TD -></TR -></TABLE -> - </P -><P -> The User Manual is then available to anyone with access to - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, by following the built-in URL: - <TT -CLASS="LITERAL" ->http://config.privoxy.org/user-manual/</TT -> - (or the shortcut: <TT -CLASS="LITERAL" ->http://p.p/user-manual/</TT ->). - </P -><P -> If the documentation is not on the local system, it can be accessed - from a remote server, as: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> user-manual http://example.com/privoxy/user-manual/</PRE -></TD -></TR -></TABLE -> - </P -><DIV -CLASS="WARNING" -><P -></P -><TABLE -CLASS="WARNING" -BORDER="1" -WIDTH="90%" -><TR -><TD -ALIGN="CENTER" -><B ->Warning</B -></TD -></TR -><TR -><TD -ALIGN="LEFT" -><P -> If set, this option should be <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->the first option in the config - file</I -></SPAN ->, because it is used while the config file is being read - on start-up. - </P -></TD -></TR -></TABLE -></DIV -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="TRUST-INFO-URL" ->7.1.2. trust-info-url</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> A URL to be displayed in the error page that users will see if access to an untrusted page is denied. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->URL</P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> No links are displayed on the "untrusted" error page. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The value of this option only matters if the experimental trust mechanism has been - activated. (See <A -HREF="config.html#TRUSTFILE" -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->trustfile</I -></SPAN -></A -> below.) - </P -><P -> If you use the trust mechanism, it is a good idea to write up some on-line - documentation about your trust policy and to specify the URL(s) here. - Use multiple times for multiple URLs. - </P -><P -> The URL(s) should be added to the trustfile as well, so users don't end up - locked out from the information on why they were locked out in the first place! - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ADMIN-ADDRESS" ->7.1.3. admin-address</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> An email address to reach the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> administrator. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->Email address</P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> No email address is displayed on error pages and the CGI user interface. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> If both <TT -CLASS="LITERAL" ->admin-address</TT -> and <TT -CLASS="LITERAL" ->proxy-info-url</TT -> - are unset, the whole "Local Privoxy Support" box on all generated pages will - not be shown. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="PROXY-INFO-URL" ->7.1.4. proxy-info-url</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> A URL to documentation about the local <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> setup, - configuration or policies. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->URL</P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> No link to local documentation is displayed on error pages and the CGI user interface. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> If both <TT -CLASS="LITERAL" ->admin-address</TT -> and <TT -CLASS="LITERAL" ->proxy-info-url</TT -> - are unset, the whole "Local Privoxy Support" box on all generated pages will - not be shown. - </P -><P -> This URL shouldn't be blocked ;-) - </P -></DD -></DL -></DIV -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONF-LOG-LOC" ->7.2. Configuration and Log File Locations</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can (and normally does) use a number of - other files for additional configuration, help and logging. - This section of the configuration file tells <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - where to find those other files. </P -><P -> The user running <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, must have read - permission for all configuration files, and write permission to any files - that would be modified, such as log files and actions files.</P -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="CONFDIR" ->7.2.1. confdir</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P ->The directory where the other configuration files are located.</P -></DD -><DT ->Type of value:</DT -><DD -><P ->Path name</P -></DD -><DT ->Default value:</DT -><DD -><P ->/etc/privoxy (Unix) <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->or</I -></SPAN -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> installation dir (Windows) </P -></DD -><DT ->Effect if unset:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Mandatory</I -></SPAN -></P -></DD -><DT ->Notes:</DT -><DD -><P -> No trailing <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->/</TT ->"</SPAN ->, please. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="TEMPLDIR" ->7.2.2. templdir</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P ->An alternative directory where the templates are loaded from.</P -></DD -><DT ->Type of value:</DT -><DD -><P ->Path name</P -></DD -><DT ->Default value:</DT -><DD -><P ->unset</P -></DD -><DT ->Effect if unset:</DT -><DD -><P ->The templates are assumed to be located in confdir/template.</P -></DD -><DT ->Notes:</DT -><DD -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> original templates are usually - overwritten with each update. Use this option to relocate customized - templates that should be kept. As template variables might change - between updates, you shouldn't expect templates to work with - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> releases other than the one - they were part of, though. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="LOGDIR" ->7.2.3. logdir</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> The directory where all logging takes place - (i.e. where the <TT -CLASS="FILENAME" ->logfile</TT -> is located). - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->Path name</P -></DD -><DT ->Default value:</DT -><DD -><P ->/var/log/privoxy (Unix) <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->or</I -></SPAN -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> installation dir (Windows) </P -></DD -><DT ->Effect if unset:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Mandatory</I -></SPAN -></P -></DD -><DT ->Notes:</DT -><DD -><P -> No trailing <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->/</TT ->"</SPAN ->, please. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ACTIONSFILE" ->7.2.4. actionsfile</A -></H4 -><A -NAME="DEFAULT.ACTION" -></A -><A -NAME="STANDARD.ACTION" -></A -><A -NAME="USER.ACTION" -></A -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> The <A -HREF="actions-file.html" ->actions file(s)</A -> to use - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->Complete file name, relative to <TT -CLASS="LITERAL" ->confdir</TT -></P -></DD -><DT ->Default values:</DT -><DD -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <P -CLASS="LITERALLAYOUT" ->  match-all.action # Actions that are applied to all sites and maybe overruled later on.</P -> - </TD -></TR -><TR -><TD -> <P -CLASS="LITERALLAYOUT" ->  default.action   # Main actions file</P -> - </TD -></TR -><TR -><TD -> <P -CLASS="LITERALLAYOUT" ->  user.action      # User customizations</P -> - </TD -></TR -></TBODY -></TABLE -><P -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> No actions are taken at all. More or less neutral proxying. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Multiple <TT -CLASS="LITERAL" ->actionsfile</TT -> lines are permitted, and are in fact recommended! - </P -><P -> - The default values are <TT -CLASS="FILENAME" ->default.action</TT ->, which is the - <SPAN -CLASS="QUOTE" ->"main"</SPAN -> actions file maintained by the developers, and - <TT -CLASS="FILENAME" ->user.action</TT ->, where you can make your personal additions. - </P -><P -> - Actions files contain all the per site and per URL configuration for - ad blocking, cookie management, privacy considerations, etc. - There is no point in using <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> without at - least one actions file. - </P -><P -> Note that since Privoxy 3.0.7, the complete filename, including the <SPAN -CLASS="QUOTE" ->".action"</SPAN -> - extension has to be specified. The syntax change was necessary to be consistent - with the other file options and to allow previously forbidden characters. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="FILTERFILE" ->7.2.5. filterfile</A -></H4 -><A -NAME="DEFAULT.FILTER" -></A -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> The <A -HREF="filter-file.html" ->filter file(s)</A -> to use - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->File name, relative to <TT -CLASS="LITERAL" ->confdir</TT -></P -></DD -><DT ->Default value:</DT -><DD -><P ->default.filter (Unix) <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->or</I -></SPAN -> default.filter.txt (Windows)</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> No textual content filtering takes place, i.e. all - <TT -CLASS="LITERAL" ->+<A -HREF="actions-file.html#FILTER" ->filter</A ->{<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT ->}</TT -> - actions in the actions files are turned neutral. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Multiple <TT -CLASS="LITERAL" ->filterfile</TT -> lines are permitted. - </P -><P -> The <A -HREF="filter-file.html" ->filter files</A -> contain content modification - rules that use <A -HREF="appendix.html#REGEX" ->regular expressions</A ->. These rules permit - powerful changes on the content of Web pages, and optionally the headers - as well, e.g., you could try to disable your favorite JavaScript annoyances, - re-write the actual displayed text, or just have some fun - playing buzzword bingo with web pages. - </P -><P -> The - <TT -CLASS="LITERAL" ->+<A -HREF="actions-file.html#FILTER" ->filter</A ->{<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT ->}</TT -> - actions rely on the relevant filter (<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT ->) - to be defined in a filter file! - </P -><P -> A pre-defined filter file called <TT -CLASS="FILENAME" ->default.filter</TT -> that contains - a number of useful filters for common problems is included in the distribution. - See the section on the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filter</A -></TT -> - action for a list. - </P -><P -> It is recommended to place any locally adapted filters into a separate - file, such as <TT -CLASS="FILENAME" ->user.filter</TT ->. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="LOGFILE" ->7.2.6. logfile</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> The log file to use - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->File name, relative to <TT -CLASS="LITERAL" ->logdir</TT -></P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset (commented out)</I -></SPAN ->. When activated: logfile (Unix) <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->or</I -></SPAN -> privoxy.log (Windows).</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> No logfile is written. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The logfile is where all logging and error messages are written. The level - of detail and number of messages are set with the <TT -CLASS="LITERAL" ->debug</TT -> - option (see below). The logfile can be useful for tracking down a problem with - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> (e.g., it's not blocking an ad you - think it should block) and it can help you to monitor what your browser - is doing. - </P -><P -> Depending on the debug options below, the logfile may be a privacy risk - if third parties can get access to it. As most users will never look - at it, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.7 and later only log fatal - errors by default. - </P -><P -> For most troubleshooting purposes, you will have to change that, - please refer to the debugging section for details. - </P -><P -> Your logfile will grow indefinitely, and you will probably want to - periodically remove it. On Unix systems, you can do this with a cron job - (see <SPAN -CLASS="QUOTE" ->"man cron"</SPAN ->). For Red Hat based Linux distributions, a - <B -CLASS="COMMAND" ->logrotate</B -> script has been included. - </P -><P -> Any log files must be writable by whatever user <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is being run as (on Unix, default user id is <SPAN -CLASS="QUOTE" ->"privoxy"</SPAN ->). - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="TRUSTFILE" ->7.2.7. trustfile</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> The name of the trust file to use - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->File name, relative to <TT -CLASS="LITERAL" ->confdir</TT -></P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset (commented out)</I -></SPAN ->. When activated: trust (Unix) <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->or</I -></SPAN -> trust.txt (Windows)</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> The entire trust mechanism is disabled. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The trust mechanism is an experimental feature for building white-lists and should - be used with care. It is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->NOT</I -></SPAN -> recommended for the casual user. - </P -><P -> If you specify a trust file, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will only allow - access to sites that are specified in the trustfile. Sites can be listed - in one of two ways: - </P -><P -> Prepending a <TT -CLASS="LITERAL" ->~</TT -> character limits access to this site - only (and any sub-paths within this site), e.g. - <TT -CLASS="LITERAL" ->~www.example.com</TT -> allows access to - <TT -CLASS="LITERAL" ->~www.example.com/features/news.html</TT ->, etc. - </P -><P -> Or, you can designate sites as <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->trusted referrers</I -></SPAN ->, by - prepending the name with a <TT -CLASS="LITERAL" ->+</TT -> character. The effect is that - access to untrusted sites will be granted -- but only if a link from this - trusted referrer was used to get there. The link target will then be added - to the <SPAN -CLASS="QUOTE" ->"trustfile"</SPAN -> so that future, direct accesses will be - granted. Sites added via this mechanism do not become trusted referrers - themselves (i.e. they are added with a <TT -CLASS="LITERAL" ->~</TT -> designation). - There is a limit of 512 such entries, after which new entries will not be - made. - </P -><P -> If you use the <TT -CLASS="LITERAL" ->+</TT -> operator in the trust file, it may grow - considerably over time. - </P -><P -> It is recommended that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> be compiled with - the <TT -CLASS="LITERAL" ->--disable-force</TT ->, <TT -CLASS="LITERAL" ->--disable-toggle</TT -> and - <TT -CLASS="LITERAL" -> --disable-editor</TT -> options, if this feature is to be - used. - </P -><P -> Possible applications include limiting Internet access for children. - </P -></DD -></DL -></DIV -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="DEBUGGING" ->7.3. Debugging</A -></H2 -><P -> These options are mainly useful when tracing a problem. - Note that you might also want to invoke - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with the <TT -CLASS="LITERAL" ->--no-daemon</TT -> - command line option when debugging. - </P -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="DEBUG" ->7.3.1. debug</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Key values that determine what information gets logged. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->Integer values</P -></DD -><DT ->Default value:</DT -><DD -><P ->0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Default value is used (see above). - </P -></DD -><DT ->Notes:</DT -><DD -><P -> The available debug levels are: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> debug 1 # Log the destination for each request <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> let through. See also debug 1024. - debug 2 # show each connection status - debug 4 # show I/O status - debug 8 # show header parsing - debug 16 # log all data written to the network into the logfile - debug 32 # debug force feature - debug 64 # debug regular expression filters - debug 128 # debug redirects - debug 256 # debug GIF de-animation - debug 512 # Common Log Format - debug 1024 # Log the destination for requests <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> didn't let through, and the reason why. - debug 2048 # CGI user interface - debug 4096 # Startup banner and warnings. - debug 8192 # Non-fatal errors</PRE -></TD -></TR -></TABLE -> - </P -><P -> To select multiple debug levels, you can either add them or use - multiple <TT -CLASS="LITERAL" ->debug</TT -> lines. - </P -><P -> A debug level of 1 is informative because it will show you each request - as it happens. <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->1, 4096 and 8192 are recommended</I -></SPAN -> - so that you will notice when things go wrong. The other levels are - probably only of interest if you are hunting down a specific problem. - They can produce a hell of an output (especially 16). - - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> used to ship with the debug levels recommended above enabled by - default, but due to privacy concerns 3.0.7 and later are configured to - only log fatal errors. - </P -><P -> If you are used to the more verbose settings, simply enable the debug lines - below again. - </P -><P -> If you want to use pure CLF (Common Log Format), you should set <SPAN -CLASS="QUOTE" ->"debug - 512"</SPAN -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->ONLY</I -></SPAN -> and not enable anything else. - </P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has a hard-coded limit for the - length of log messages. If it's reached, messages are logged truncated - and marked with <SPAN -CLASS="QUOTE" ->"... [too long, truncated]"</SPAN ->. - </P -><P -> Please don't file any support requests without trying to reproduce - the problem with increased debug level first. Once you read the log - messages, you may even be able to solve the problem on your own. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SINGLE-THREADED" ->7.3.2. single-threaded</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether to run only one server thread. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->None</I -></SPAN -></P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Multi-threaded (or, where unavailable: forked) operation, i.e. the ability to - serve multiple requests simultaneously. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This option is only there for debugging purposes. - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->It will drastically reduce performance.</I -></SPAN -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="HOSTNAME" ->7.3.3. hostname</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> The hostname shown on the CGI pages. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->Text</P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> The hostname provided by the operating system is used. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> On some misconfigured systems resolving the hostname fails or - takes too much time and slows Privoxy down. Setting a fixed hostname - works around the problem. - </P -><P -> In other circumstances it might be desirable to show a hostname - other than the one returned by the operating system. For example - if the system has several different hostnames and you don't want - to use the first one. - </P -><P -> Note that Privoxy does not validate the specified hostname value. - </P -></DD -></DL -></DIV -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="ACCESS-CONTROL" ->7.4. Access Control and Security</A -></H2 -><P -> This section of the config file controls the security-relevant aspects - of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s configuration. - </P -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="LISTEN-ADDRESS" ->7.4.1. listen-address</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> The IP address and TCP port on which <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will - listen for client requests. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->[<TT -CLASS="REPLACEABLE" -><I ->IP-Address</I -></TT ->]:<TT -CLASS="REPLACEABLE" -><I ->Port</I -></TT -></P -></DD -><DT ->Default value:</DT -><DD -><P ->127.0.0.1:8118</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Bind to 127.0.0.1 (localhost), port 8118. This is suitable and recommended for - home users who run <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on the same machine as - their browser. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> You will need to configure your browser(s) to this proxy address and port. - </P -><P -> If you already have another service running on port 8118, or if you want to - serve requests from other machines (e.g. on your local network) as well, you - will need to override the default. - </P -><P -> If you leave out the IP address, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will - bind to all interfaces (addresses) on your machine and may become reachable - from the Internet. In that case, consider using <A -HREF="config.html#ACLS" ->access control lists</A -> (ACL's, see below), and/or - a firewall. - </P -><P -> If you open <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to untrusted users, you will - also want to make sure that the following actions are disabled: <TT -CLASS="LITERAL" -><A -HREF="config.html#ENABLE-EDIT-ACTIONS" ->enable-edit-actions</A -></TT -> and - <TT -CLASS="LITERAL" -><A -HREF="config.html#ENABLE-REMOTE-TOGGLE" ->enable-remote-toggle</A -></TT -> - </P -></DD -><DT ->Example:</DT -><DD -><P -> Suppose you are running <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on - a machine which has the address 192.168.0.1 on your local private network - (192.168.0.0) and has another outside connection with a different address. - You want it to serve requests from inside only: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="PROGRAMLISTING" -> listen-address 192.168.0.1:8118</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="TOGGLE" ->7.4.2. toggle</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Initial state of "toggle" status - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->1 or 0</P -></DD -><DT ->Default value:</DT -><DD -><P ->1</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Act as if toggled on - </P -></DD -><DT ->Notes:</DT -><DD -><P -> If set to 0, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will start in - <SPAN -CLASS="QUOTE" ->"toggled off"</SPAN -> mode, i.e. mostly behave like a normal, - content-neutral proxy with both ad blocking and content filtering - disabled. See <TT -CLASS="LITERAL" ->enable-remote-toggle</TT -> below. - </P -><P -> The windows version will only display the toggle icon in the system tray - if this option is present. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ENABLE-REMOTE-TOGGLE" ->7.4.3. enable-remote-toggle</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether or not the <A -HREF="http://config.privoxy.org/toggle" -TARGET="_top" ->web-based toggle - feature</A -> may be used - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->0 or 1</P -></DD -><DT ->Default value:</DT -><DD -><P ->0</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> The web-based toggle feature is disabled. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> When toggled off, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> mostly acts like a normal, - content-neutral proxy, i.e. doesn't block ads or filter content. - </P -><P -> Access to the toggle feature can <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not</I -></SPAN -> be - controlled separately by <SPAN -CLASS="QUOTE" ->"ACLs"</SPAN -> or HTTP authentication, - so that everybody who can access <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> (see - <SPAN -CLASS="QUOTE" ->"ACLs"</SPAN -> and <TT -CLASS="LITERAL" ->listen-address</TT -> above) can - toggle it for all users. So this option is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not recommended</I -></SPAN -> - for multi-user environments with untrusted users. - </P -><P -> Note that malicious client side code (e.g Java) is also - capable of using this option. - </P -><P -> As a lot of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> users don't read - documentation, this feature is disabled by default. - </P -><P -> Note that you must have compiled <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with - support for this feature, otherwise this option has no effect. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ENABLE-REMOTE-HTTP-TOGGLE" ->7.4.4. enable-remote-http-toggle</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether or not Privoxy recognizes special HTTP headers to change its behaviour. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->0 or 1</P -></DD -><DT ->Default value:</DT -><DD -><P ->0</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Privoxy ignores special HTTP headers. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> When toggled on, the client can change <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - behaviour by setting special HTTP headers. Currently the only supported - special header is <SPAN -CLASS="QUOTE" ->"X-Filter: No"</SPAN ->, to disable filtering for - the ongoing request, even if it is enabled in one of the action files. - </P -><P -> This feature is disabled by default. If you are using - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in a environment with trusted clients, - you may enable this feature at your discretion. Note that malicious client - side code (e.g Java) is also capable of using this feature. - </P -><P -> This option will be removed in future releases as it has been obsoleted - by the more general header taggers. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ENABLE-EDIT-ACTIONS" ->7.4.5. enable-edit-actions</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether or not the <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->web-based actions - file editor</A -> may be used - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->0 or 1</P -></DD -><DT ->Default value:</DT -><DD -><P ->0</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> The web-based actions file editor is disabled. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Access to the editor can <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not</I -></SPAN -> be - controlled separately by <SPAN -CLASS="QUOTE" ->"ACLs"</SPAN -> or HTTP authentication, - so that everybody who can access <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> (see - <SPAN -CLASS="QUOTE" ->"ACLs"</SPAN -> and <TT -CLASS="LITERAL" ->listen-address</TT -> above) can - modify its configuration for all users. - </P -><P -> This option is <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not recommended</I -></SPAN -> for environments - with untrusted users and as a lot of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - users don't read documentation, this feature is disabled by default. - </P -><P -> Note that malicious client side code (e.g Java) is also - capable of using the actions editor and you shouldn't enable - this options unless you understand the consequences and are - sure your browser is configured correctly. - </P -><P -> Note that you must have compiled <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with - support for this feature, otherwise this option has no effect. - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ENFORCE-BLOCKS" ->7.4.6. enforce-blocks</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether the user is allowed to ignore blocks and can <SPAN -CLASS="QUOTE" ->"go there anyway"</SPAN ->. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->0 or 1</I -></TT -> - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->0</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Blocks are not enforced. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is mainly used to block and filter - requests as a service to the user, for example to block ads and other - junk that clogs the pipes. <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> configuration - isn't perfect and sometimes innocent pages are blocked. In this situation it - makes sense to allow the user to enforce the request and have - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> ignore the block. - </P -><P -> In the default configuration <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - <SPAN -CLASS="QUOTE" ->"Blocked"</SPAN -> page contains a <SPAN -CLASS="QUOTE" ->"go there anyway"</SPAN -> - link to adds a special string (the force prefix) to the request URL. - If that link is used, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will - detect the force prefix, remove it again and let the request pass. - </P -><P -> Of course <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can also be used to enforce - a network policy. In that case the user obviously should not be able to - bypass any blocks, and that's what the <SPAN -CLASS="QUOTE" ->"enforce-blocks"</SPAN -> - option is for. If it's enabled, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> hides - the <SPAN -CLASS="QUOTE" ->"go there anyway"</SPAN -> link. If the user adds the force - prefix by hand, it will not be accepted and the circumvention attempt - is logged. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> enforce-blocks 1 - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ACLS" ->7.4.7. ACLs: permit-access and deny-access</A -></H4 -><A -NAME="PERMIT-ACCESS" -></A -><A -NAME="DENY-ACCESS" -></A -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Who can access what. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->src_addr</I -></TT ->[/<TT -CLASS="REPLACEABLE" -><I ->src_masklen</I -></TT ->] - [<TT -CLASS="REPLACEABLE" -><I ->dst_addr</I -></TT ->[/<TT -CLASS="REPLACEABLE" -><I ->dst_masklen</I -></TT ->]] - </P -><P -> Where <TT -CLASS="REPLACEABLE" -><I ->src_addr</I -></TT -> and - <TT -CLASS="REPLACEABLE" -><I ->dst_addr</I -></TT -> are IP addresses in dotted decimal notation or valid - DNS names, and <TT -CLASS="REPLACEABLE" -><I ->src_masklen</I -></TT -> and - <TT -CLASS="REPLACEABLE" -><I ->dst_masklen</I -></TT -> are subnet masks in CIDR notation, i.e. integer - values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole - destination part are optional. - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Don't restrict access further than implied by <TT -CLASS="LITERAL" ->listen-address</TT -> - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Access controls are included at the request of ISPs and systems - administrators, and <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->are not usually needed by individual users</I -></SPAN ->. - For a typical home user, it will normally suffice to ensure that - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> only listens on the localhost - (127.0.0.1) or internal (home) network address by means of the - <A -HREF="config.html#LISTEN-ADDRESS" -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->listen-address</I -></SPAN -></A -> - option. - </P -><P -> Please see the warnings in the FAQ that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is not intended to be a substitute for a firewall or to encourage anyone - to defer addressing basic security weaknesses. - </P -><P -> Multiple ACL lines are OK. - If any ACLs are specified, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> only talks - to IP addresses that match at least one <TT -CLASS="LITERAL" ->permit-access</TT -> line - and don't match any subsequent <TT -CLASS="LITERAL" ->deny-access</TT -> line. In other words, the - last match wins, with the default being <TT -CLASS="LITERAL" ->deny-access</TT ->. - </P -><P -> If <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is using a forwarder (see <TT -CLASS="LITERAL" ->forward</TT -> below) - for a particular destination URL, the <TT -CLASS="REPLACEABLE" -><I ->dst_addr</I -></TT -> - that is examined is the address of the forwarder and <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->NOT</I -></SPAN -> the address - of the ultimate target. This is necessary because it may be impossible for the local - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to determine the IP address of the - ultimate target (that's often what gateways are used for). - </P -><P -> You should prefer using IP addresses over DNS names, because the address lookups take - time. All DNS names must resolve! You can <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not</I -></SPAN -> use domain patterns - like <SPAN -CLASS="QUOTE" ->"*.org"</SPAN -> or partial domain names. If a DNS name resolves to multiple - IP addresses, only the first one is used. - </P -><P -> Denying access to particular sites by ACL may have undesired side effects - if the site in question is hosted on a machine which also hosts other sites - (most sites are). - </P -></DD -><DT ->Examples:</DT -><DD -><P -> Explicitly define the default behavior if no ACL and - <TT -CLASS="LITERAL" ->listen-address</TT -> are set: <SPAN -CLASS="QUOTE" ->"localhost"</SPAN -> - is OK. The absence of a <TT -CLASS="REPLACEABLE" -><I ->dst_addr</I -></TT -> implies that - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> destination addresses are OK: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> permit-access localhost</PRE -></TD -></TR -></TABLE -> - </P -><P -> Allow any host on the same class C subnet as www.privoxy.org access to - nothing but www.example.com (or other domains hosted on the same system): - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> permit-access www.privoxy.org/24 www.example.com/32</PRE -></TD -></TR -></TABLE -> - </P -><P -> Allow access from any host on the 26-bit subnet 192.168.45.64 to anywhere, - with the exception that 192.168.45.73 may not access the IP address behind - www.dirty-stuff.example.com: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> permit-access 192.168.45.64/26 - deny-access 192.168.45.73 www.dirty-stuff.example.com</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="BUFFER-LIMIT" ->7.4.8. buffer-limit</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Maximum size of the buffer for content filtering. - </P -></DD -><DT ->Type of value:</DT -><DD -><P ->Size in Kbytes</P -></DD -><DT ->Default value:</DT -><DD -><P ->4096</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Use a 4MB (4096 KB) limit. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> For content filtering, i.e. the <TT -CLASS="LITERAL" ->+filter</TT -> and - <TT -CLASS="LITERAL" ->+deanimate-gif</TT -> actions, it is necessary that - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> buffers the entire document body. - This can be potentially dangerous, since a server could just keep sending - data indefinitely and wait for your RAM to exhaust -- with nasty consequences. - Hence this option. - </P -><P -> When a document buffer size reaches the <TT -CLASS="LITERAL" ->buffer-limit</TT ->, it is - flushed to the client unfiltered and no further attempt to - filter the rest of the document is made. Remember that there may be multiple threads - running, which might require up to <TT -CLASS="LITERAL" ->buffer-limit</TT -> Kbytes - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->each</I -></SPAN ->, unless you have enabled <SPAN -CLASS="QUOTE" ->"single-threaded"</SPAN -> - above. - </P -></DD -></DL -></DIV -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="FORWARDING" ->7.5. Forwarding</A -></H2 -><P -> This feature allows routing of HTTP requests through a chain of - multiple proxies.</P -><P -> Forwarding can be used to chain Privoxy with a caching proxy to speed - up browsing. Using a parent proxy may also be necessary if the machine - that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> runs on has no direct Internet access.</P -><P -> Note that parent proxies can severely decrease your privacy level. - For example a parent proxy could add your IP address to the request - headers and if it's a caching proxy it may add the <SPAN -CLASS="QUOTE" ->"Etag"</SPAN -> - header to revalidation requests again, even though you configured Privoxy - to remove it. It may also ignore Privoxy's header time randomization and use the - original values which could be used by the server as cookie replacement - to track your steps between visits.</P -><P -> Also specified here are SOCKS proxies. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - supports the SOCKS 4 and SOCKS 4A protocols.</P -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="FORWARD" ->7.5.1. forward</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> To which parent HTTP proxy specific requests should be routed. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->target_pattern</I -></TT -> - <TT -CLASS="REPLACEABLE" -><I ->http_parent</I -></TT ->[:<TT -CLASS="REPLACEABLE" -><I ->port</I -></TT ->] - </P -><P -> where <TT -CLASS="REPLACEABLE" -><I ->target_pattern</I -></TT -> is a <A -HREF="actions-file.html#AF-PATTERNS" ->URL pattern</A -> - that specifies to which requests (i.e. URLs) this forward rule shall apply. Use <TT -CLASS="LITERAL" ->/</TT -> to - denote <SPAN -CLASS="QUOTE" ->"all URLs"</SPAN ->. - <TT -CLASS="REPLACEABLE" -><I ->http_parent</I -></TT ->[:<TT -CLASS="REPLACEABLE" -><I ->port</I -></TT ->] - is the DNS name or IP address of the parent HTTP proxy through which the requests should be forwarded, - optionally followed by its listening port (default: 8080). - Use a single dot (<TT -CLASS="LITERAL" ->.</TT ->) to denote <SPAN -CLASS="QUOTE" ->"no forwarding"</SPAN ->. - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Don't use parent HTTP proxies. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> If <TT -CLASS="REPLACEABLE" -><I ->http_parent</I -></TT -> is <SPAN -CLASS="QUOTE" ->"."</SPAN ->, then requests are not - forwarded to another HTTP proxy but are made directly to the web servers. - </P -><P -> Multiple lines are OK, they are checked in sequence, and the last match wins. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> Everything goes to an example parent proxy, except SSL on port 443 (which it doesn't handle): - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward / parent-proxy.example.org:8080 - forward :443 .</PRE -></TD -></TR -></TABLE -> - </P -><P -> Everything goes to our example ISP's caching proxy, except for requests - to that ISP's sites: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward / caching-proxy.isp.example.net:8000 - forward .isp.example.net .</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SOCKS" ->7.5.2. forward-socks4, forward-socks4a and forward-socks5</A -></H4 -><A -NAME="FORWARD-SOCKS4" -></A -><A -NAME="FORWARD-SOCKS4A" -></A -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Through which SOCKS proxy (and optionally to which parent HTTP proxy) specific requests should be routed. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->target_pattern</I -></TT -> - <TT -CLASS="REPLACEABLE" -><I ->socks_proxy</I -></TT ->[:<TT -CLASS="REPLACEABLE" -><I ->port</I -></TT ->] - <TT -CLASS="REPLACEABLE" -><I ->http_parent</I -></TT ->[:<TT -CLASS="REPLACEABLE" -><I ->port</I -></TT ->] - </P -><P -> where <TT -CLASS="REPLACEABLE" -><I ->target_pattern</I -></TT -> is a - <A -HREF="actions-file.html#AF-PATTERNS" ->URL pattern</A -> that specifies to which - requests (i.e. URLs) this forward rule shall apply. Use <TT -CLASS="LITERAL" ->/</TT -> to - denote <SPAN -CLASS="QUOTE" ->"all URLs"</SPAN ->. <TT -CLASS="REPLACEABLE" -><I ->http_parent</I -></TT -> - and <TT -CLASS="REPLACEABLE" -><I ->socks_proxy</I -></TT -> - are IP addresses in dotted decimal notation or valid DNS names - (<TT -CLASS="REPLACEABLE" -><I ->http_parent</I -></TT -> - may be <SPAN -CLASS="QUOTE" ->"."</SPAN -> to denote <SPAN -CLASS="QUOTE" ->"no HTTP forwarding"</SPAN ->), and the optional - <TT -CLASS="REPLACEABLE" -><I ->port</I -></TT -> parameters are TCP ports, - i.e. integer values from 1 to 65535 - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Unset</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Don't use SOCKS proxies. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Multiple lines are OK, they are checked in sequence, and the last match wins. - </P -><P -> The difference between <TT -CLASS="LITERAL" ->forward-socks4</TT -> and <TT -CLASS="LITERAL" ->forward-socks4a</TT -> - is that in the SOCKS 4A protocol, the DNS resolution of the target hostname happens on the SOCKS - server, while in SOCKS 4 it happens locally. - </P -><P -> With <TT -CLASS="LITERAL" ->forward-socks5</TT -> the DNS resolution will happen on the remote server as well. - </P -><P -> If <TT -CLASS="REPLACEABLE" -><I ->http_parent</I -></TT -> is <SPAN -CLASS="QUOTE" ->"."</SPAN ->, then requests are not - forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through - a SOCKS proxy. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> From the company example.com, direct connections are made to all - <SPAN -CLASS="QUOTE" ->"internal"</SPAN -> domains, but everything outbound goes through - their ISP's proxy by way of example.com's corporate SOCKS 4A gateway to - the Internet. - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 - forward .example.com .</PRE -></TD -></TR -></TABLE -> - </P -><P -> A rule that uses a SOCKS 4 gateway for all destinations but no HTTP parent looks like this: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward-socks4 / socks-gw.example.com:1080 .</PRE -></TD -></TR -></TABLE -> - </P -><P -> To chain Privoxy and Tor, both running on the same system, you would use - something like: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward-socks4a / 127.0.0.1:9050 .</PRE -></TD -></TR -></TABLE -> - </P -><P -> The public <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> network can't be used to - reach your local network, if you need to access local servers you - therefore might want to make some exceptions: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward 192.168.*.*/ . - forward 10.*.*.*/ . - forward 127.*.*.*/ .</PRE -></TD -></TR -></TABLE -> - </P -><P -> Unencrypted connections to systems in these address ranges will - be as (un)secure as the local network is, but the alternative is that you - can't reach the local network through <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - at all. Of course this may actually be desired and there is no reason - to make these exceptions if you aren't sure you need them. - </P -><P -> If you also want to be able to reach servers in your local network by - using their names, you will need additional exceptions that look like - this: - </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="90%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward localhost/ .</PRE -></TD -></TR -></TABLE -> - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ADVANCED-FORWARDING-EXAMPLES" ->7.5.3. Advanced Forwarding Examples</A -></H4 -><P -> If you have links to multiple ISPs that provide various special content - only to their subscribers, you can configure multiple <SPAN -CLASS="APPLICATION" ->Privoxies</SPAN -> - which have connections to the respective ISPs to act as forwarders to each other, so that - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->your</I -></SPAN -> users can see the internal content of all ISPs.</P -><P -> Assume that host-a has a PPP connection to isp-a.example.net. And host-b has a PPP connection to - isp-b.example.org. Both run <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. Their forwarding - configuration can look like this:</P -><P -> host-a:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward / . - forward .isp-b.example.net host-b:8118</PRE -></TD -></TR -></TABLE -></P -><P -> host-b:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward / . - forward .isp-a.example.org host-a:8118</PRE -></TD -></TR -></TABLE -></P -><P -> Now, your users can set their browser's proxy to use either - host-a or host-b and be able to browse the internal content - of both isp-a and isp-b.</P -><P -> If you intend to chain <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and - <SPAN -CLASS="APPLICATION" ->squid</SPAN -> locally, then chaining as - <TT -CLASS="LITERAL" ->browser -> squid -> privoxy</TT -> is the recommended way. </P -><P -> Assuming that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and <SPAN -CLASS="APPLICATION" ->squid</SPAN -> - run on the same box, your <SPAN -CLASS="APPLICATION" ->squid</SPAN -> configuration could then look like this:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # Define Privoxy as parent proxy (without ICP) - cache_peer 127.0.0.1 parent 8118 7 no-query - - # Define ACL for protocol FTP - acl ftp proto FTP - - # Do not forward FTP requests to Privoxy - always_direct allow ftp - - # Forward all the rest to Privoxy - never_direct allow all</PRE -></TD -></TR -></TABLE -></P -><P -> You would then need to change your browser's proxy settings to <SPAN -CLASS="APPLICATION" ->squid</SPAN ->'s address and port. - Squid normally uses port 3128. If unsure consult <TT -CLASS="LITERAL" ->http_port</TT -> in <TT -CLASS="FILENAME" ->squid.conf</TT ->.</P -><P -> You could just as well decide to only forward requests you suspect - of leading to Windows executables through a virus-scanning parent proxy, - say, on <TT -CLASS="LITERAL" ->antivir.example.com</TT ->, port 8010:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> forward / . - forward /.*\.(exe|com|dll|zip)$ antivir.example.com:8010</PRE -></TD -></TR -></TABLE -> </P -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="FORWARDED-CONNECT-RETRIES" ->7.5.4. forwarded-connect-retries</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> How often Privoxy retries if a forwarded connection request fails. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->Number of retries.</I -></TT -> - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->0</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Connections forwarded through other proxies are treated like direct connections and no retry attempts are made. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->forwarded-connect-retries</I -></TT -> is mainly interesting - for socks4a connections, where <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can't detect why the connections failed. - The connection might have failed because of a DNS timeout in which case a retry makes sense, - but it might also have failed because the server doesn't exist or isn't reachable. In this - case the retry will just delay the appearance of Privoxy's error message. - </P -><P -> Note that in the context of this option, <SPAN -CLASS="QUOTE" ->"forwarded connections"</SPAN -> includes all connections - that Privoxy forwards through other proxies. This option is not limited to the HTTP CONNECT method. - </P -><P -> Only use this option, if you are getting lots of forwarding-related error messages - that go away when you try again manually. Start with a small value and check Privoxy's - logfile from time to time, to see how many retries are usually needed. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> forwarded-connect-retries 1 - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ACCEPT-INTERCEPTED-REQUESTS" ->7.5.5. accept-intercepted-requests</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether intercepted requests should be treated as valid. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->0 or 1</I -></TT -> - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->0</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Only proxy requests are accepted, intercepted requests are treated as invalid. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> If you don't trust your clients and want to force them - to use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, enable this - option and configure your packet filter to redirect outgoing - HTTP connections into <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - </P -><P -> Make sure that <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> own requests - aren't redirected as well. Additionally take care that - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can't intentionally connect - to itself, otherwise you could run into redirection loops if - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> listening port is reachable - by the outside or an attacker has access to the pages you visit. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> accept-intercepted-requests 1 - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="ALLOW-CGI-REQUEST-CRUNCHING" ->7.5.6. allow-cgi-request-crunching</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether requests to <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> CGI pages can be blocked or redirected. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->0 or 1</I -></TT -> - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->0</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> ignores block and redirect actions for its CGI pages. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> By default <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> ignores block or redirect actions - for its CGI pages. Intercepting these requests can be useful in multi-user - setups to implement fine-grained access control, but it can also render the complete - web interface useless and make debugging problems painful if done without care. - </P -><P -> Don't enable this option unless you're sure that you really need it. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> allow-cgi-request-crunching 1 - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SPLIT-LARGE-FORMS" ->7.5.7. split-large-forms</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Whether the CGI interface should stay compatible with broken HTTP clients. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->0 or 1</I -></TT -> - </P -></DD -><DT ->Default value:</DT -><DD -><P -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->0</I -></SPAN -></P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> The CGI form generate long GET URLs. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> CGI forms can lead to - rather long URLs. This isn't a problem as far as the HTTP - standard is concerned, but it can confuse clients with arbitrary - URL length limitations. - </P -><P -> Enabling split-large-forms causes <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - to divide big forms into smaller ones to keep the URL length down. - It makes editing a lot less convenient and you can no longer - submit all changes at once, but at least it works around this - browser bug. - </P -><P -> If you don't notice any editing problems, there is no reason - to enable this option, but if one of the submit buttons appears - to be broken, you should give it a try. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> split-large-forms 1 - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="KEEP-ALIVE-TIMEOUT" ->7.5.8. keep-alive-timeout</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Number of seconds after which an open connection will no longer be reused. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->Time in seconds.</I -></TT -> - </P -></DD -><DT ->Default value:</DT -><DD -><P ->None</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> Connections are not reused. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> This option has no effect if <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - has been compiled without keep-alive support. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> Note that reusing connections doesn't necessary cause speedups. - There are also a few privacy implications you should be aware of. - </P -><P -> Outgoing connections are shared between clients (if there are more - than one) and closing the client that initiated the outgoing connection - does not affect the connection between <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and the server unless - the client's request hasn't been completed yet. If the outgoing connection - is idle, it will not be closed until either <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - or the server's timeout is reached. While it's open, the server knows - that the system running <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is still there. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> keep-alive-timeout 300 - </P -></DD -></DL -></DIV -></DIV -><DIV -CLASS="SECT3" -><H4 -CLASS="SECT3" -><A -NAME="SOCKET-TIMEOUT" ->7.5.9. socket-timeout</A -></H4 -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Specifies:</DT -><DD -><P -> Number of seconds after which a socket times out if - no data is received. - </P -></DD -><DT ->Type of value:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->Time in seconds.</I -></TT -> - </P -></DD -><DT ->Default value:</DT -><DD -><P ->None</P -></DD -><DT ->Effect if unset:</DT -><DD -><P -> A default value of 300 seconds is used. - </P -></DD -><DT ->Notes:</DT -><DD -><P -> For SOCKS requests the timeout currently doesn't start until - the SOCKS server accepted the request. This will be fixed in - the next release. - </P -></DD -><DT ->Examples:</DT -><DD -><P -> socket-timeout 300 - </P -></DD -></DL -></DIV -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="WINDOWS-GUI" ->7.6. Windows GUI Options</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> has a number of options specific to the - Windows GUI interface:</P -><A -NAME="ACTIVITY-ANIMATION" -></A -><P -> If <SPAN -CLASS="QUOTE" ->"activity-animation"</SPAN -> is set to 1, the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> icon will animate when - <SPAN -CLASS="QUOTE" ->"Privoxy"</SPAN -> is active. To turn off, set to 0.</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->activity-animation 1</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="LOG-MESSAGES" -></A -><P -> If <SPAN -CLASS="QUOTE" ->"log-messages"</SPAN -> is set to 1, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will log messages to the console - window:</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->log-messages 1</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="LOG-BUFFER-SIZE" -></A -><P -> - If <SPAN -CLASS="QUOTE" ->"log-buffer-size"</SPAN -> is set to 1, the size of the log buffer, - i.e. the amount of memory used for the log messages displayed in the - console window, will be limited to <SPAN -CLASS="QUOTE" ->"log-max-lines"</SPAN -> (see below).</P -><P -> Warning: Setting this to 0 will result in the buffer to grow infinitely and - eat up all your memory!</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->log-buffer-size 1</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="LOG-MAX-LINES" -></A -><P -> <SPAN -CLASS="APPLICATION" ->log-max-lines</SPAN -> is the maximum number of lines held - in the log buffer. See above.</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->log-max-lines 200</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="LOG-HIGHLIGHT-MESSAGES" -></A -><P -> If <SPAN -CLASS="QUOTE" ->"log-highlight-messages"</SPAN -> is set to 1, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will highlight portions of the log - messages with a bold-faced font:</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->log-highlight-messages 1</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="LOG-FONT-NAME" -></A -><P -> The font used in the console window:</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->log-font-name Comic Sans MS</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="LOG-FONT-SIZE" -></A -><P -> Font size used in the console window:</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->log-font-size 8</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="SHOW-ON-TASK-BAR" -></A -><P -> - <SPAN -CLASS="QUOTE" ->"show-on-task-bar"</SPAN -> controls whether or not - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will appear as a button on the Task bar - when minimized:</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->show-on-task-bar 0</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="CLOSE-BUTTON-MINIMIZES" -></A -><P -> If <SPAN -CLASS="QUOTE" ->"close-button-minimizes"</SPAN -> is set to 1, the Windows close - button will minimize <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> instead of closing - the program (close with the exit option on the File menu).</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->close-button-minimizes 1</I -></SPAN -><br> -   </P -> - </TT -></P -><A -NAME="HIDE-CONSOLE" -></A -><P -> The <SPAN -CLASS="QUOTE" ->"hide-console"</SPAN -> option is specific to the MS-Win console - version of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. If this option is used, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will disconnect from and hide the - command console.</P -><P -> <TT -CLASS="LITERAL" -> <P -CLASS="LITERALLAYOUT" ->  #<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->hide-console</I -></SPAN -><br> -   </P -> - </TT -></P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="configuration.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="actions-file.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Privoxy Configuration</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Actions Files</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/configuration.html b/external/privoxy/doc/webserver/user-manual/configuration.html deleted file mode 100644 index b4f021e..0000000 --- a/external/privoxy/doc/webserver/user-manual/configuration.html +++ /dev/null @@ -1,514 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy Configuration</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Starting Privoxy" -HREF="startup.html"><LINK -REL="NEXT" -TITLE="The Main Configuration File" -HREF="config.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="startup.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="config.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CONFIGURATION" ->6. Privoxy Configuration</A -></H1 -><P -> All <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> configuration is stored - in text files. These files can be edited with a text editor. - Many important aspects of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can - also be controlled easily with a web browser. - </P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN776" ->6.1. Controlling Privoxy with Your Web Browser</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s user interface can be reached through the special - URL <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> - (shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->), - which is a built-in page and works without Internet access. - You will see the following section:</P -><TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> <H2 -CLASS="BRIDGEHEAD" -><A -NAME="AEN784" -></A -> Privoxy Menu</H2 -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> ▪ <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->View & change the current configuration</A -> - </TD -></TR -><TR -><TD -> ▪ <A -HREF="http://config.privoxy.org/show-version" -TARGET="_top" ->View the source code version numbers</A -> - </TD -></TR -><TR -><TD -> ▪ <A -HREF="http://config.privoxy.org/show-request" -TARGET="_top" ->View the request headers.</A -> - </TD -></TR -><TR -><TD -> ▪ <A -HREF="http://config.privoxy.org/show-url-info" -TARGET="_top" ->Look up which actions apply to a URL and why</A -> - </TD -></TR -><TR -><TD -> ▪ <A -HREF="http://config.privoxy.org/toggle" -TARGET="_top" ->Toggle Privoxy on or off</A -> - </TD -></TR -><TR -><TD -> ▪ <A -HREF="http://www.privoxy.org/3.0.12/user-manual/" -TARGET="_top" ->Documentation</A -> - </TD -></TR -></TBODY -></TABLE -><P -></P -></PRE -></TD -></TR -></TABLE -><P -> This should be self-explanatory. Note the first item leads to an editor for the - <A -HREF="actions-file.html" ->actions files</A ->, which is where the ad, banner, - cookie, and URL blocking magic is configured as well as other advanced features of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. This is an easy way to adjust various - aspects of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> configuration. The actions - file, and other configuration files, are explained in detail below. </P -><P -> <SPAN -CLASS="QUOTE" ->"Toggle Privoxy On or Off"</SPAN -> is handy for sites that might - have problems with your current actions and filters. You can in fact use - it as a test to see whether it is <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - causing the problem or not. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> continues - to run as a proxy in this case, but all manipulation is disabled, i.e. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> acts like a normal forwarding proxy. There - is even a toggle <A -HREF="appendix.html#BOOKMARKLETS" ->Bookmarklet</A -> offered, so - that you can toggle <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with one click from - your browser.</P -><P -> Note that several of the features described above are disabled by default - in <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.7 beta and later. - Check the - <A -HREF="config.html" -TARGET="_top" ->configuration file</A -> to learn why - and in which cases it's safe to enable them again.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONFOVERVIEW" ->6.2. Configuration Files Overview</A -></H2 -><P -> For Unix, *BSD and Linux, all configuration files are located in - <TT -CLASS="FILENAME" ->/etc/privoxy/</TT -> by default. For MS Windows, OS/2, and - AmigaOS these are all in the same directory as the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> executable. </P -><P -> The installed defaults provide a reasonable starting point, though - some settings may be aggressive by some standards. For the time being, the - principle configuration files are:</P -><P -> <P -></P -><UL -><LI -><P -> The <A -HREF="config.html" ->main configuration file</A -> is named <TT -CLASS="FILENAME" ->config</TT -> - on Linux, Unix, BSD, OS/2, and AmigaOS and <TT -CLASS="FILENAME" ->config.txt</TT -> - on Windows. This is a required file. - </P -></LI -><LI -><P -> <TT -CLASS="FILENAME" ->match-all.action</TT -> is used to define which <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> - relating to banner-blocking, images, pop-ups, content modification, cookie handling - etc should be applied by default. It should be the first actions file loaded. - </P -><P -> <TT -CLASS="FILENAME" ->default.action</TT -> defines many exceptions (both positive and negative) - from the default set of actions that's configured in <TT -CLASS="FILENAME" ->match-all.action</TT ->. - It should be the second actions file loaded and shouldn't be edited by the user. - </P -><P -> Multiple actions files may be defined in <TT -CLASS="FILENAME" ->config</TT ->. These - are processed in the order they are defined. Local customizations and locally - preferred exceptions to the default policies as defined in - <TT -CLASS="FILENAME" ->match-all.action</TT -> (which you will most probably want - to define sooner or later) are best applied in <TT -CLASS="FILENAME" ->user.action</TT ->, - where you can preserve them across upgrades. The file isn't installed by all - installers, but you can easily create it yourself with a text editor. - </P -><P -> - There is also a web based editor that can be accessed from - <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A -> - (Shortcut: <A -HREF="http://p.p/show-status" -TARGET="_top" ->http://p.p/show-status</A ->) for the - various actions files. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"Filter files"</SPAN -> (the <A -HREF="filter-file.html" ->filter - file</A ->) can be used to re-write the raw page content, including - viewable text as well as embedded HTML and JavaScript, and whatever else - lurks on any given web page. The filtering jobs are only pre-defined here; - whether to apply them or not is up to the actions files. - <TT -CLASS="FILENAME" ->default.filter</TT -> includes various filters made - available for use by the developers. Some are much more intrusive than - others, and all should be used with caution. You may define additional - filter files in <TT -CLASS="FILENAME" ->config</TT -> as you can with - actions files. We suggest <TT -CLASS="FILENAME" ->user.filter</TT -> for any - locally defined filters or customizations. - </P -></LI -></UL -></P -><P -> The syntax of the configuration and filter files may change between different - Privoxy versions, unfortunately some enhancements cost backwards compatibility. - </P -><P -> All files use the <SPAN -CLASS="QUOTE" ->"<TT -CLASS="LITERAL" ->#</TT ->"</SPAN -> character to denote a - comment (the rest of the line will be ignored) and understand line continuation - through placing a backslash ("<TT -CLASS="LITERAL" ->\</TT ->") as the very last character - in a line. If the <TT -CLASS="LITERAL" ->#</TT -> is preceded by a backslash, it looses - its special function. Placing a <TT -CLASS="LITERAL" ->#</TT -> in front of an otherwise - valid configuration line to prevent it from being interpreted is called "commenting - out" that line. Blank lines are ignored.</P -><P -> The actions files and filter files - can use Perl style <A -HREF="appendix.html#REGEX" ->regular expressions</A -> for - maximum flexibility. </P -><P -> After making any changes, there is no need to restart - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in order for the changes to take - effect. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> detects such changes - automatically. Note, however, that it may take one or two additional - requests for the change to take effect. When changing the listening address - of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, these <SPAN -CLASS="QUOTE" ->"wake up"</SPAN -> requests - must obviously be sent to the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->old</I -></SPAN -> listening address.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="startup.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="config.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Starting Privoxy</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->The Main Configuration File</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/contact.html b/external/privoxy/doc/webserver/user-manual/contact.html deleted file mode 100644 index 3fd43eb..0000000 --- a/external/privoxy/doc/webserver/user-manual/contact.html +++ /dev/null @@ -1,514 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Contacting the Developers, Bug Reporting and Feature -Requests</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Privoxy's Template Files" -HREF="templates.html"><LINK -REL="NEXT" -TITLE="Privoxy Copyright, License and History" -HREF="copyright.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="templates.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="copyright.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="CONTACT" ->11. Contacting the Developers, Bug Reporting and Feature -Requests</A -></H1 -><P -> We value your feedback. In fact, we rely on it to improve - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and its configuration. - However, please note the following hints, so we can - provide you with the best support:</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-SUPPORT" ->11.1. Get Support</A -></H2 -><P -> For casual users, our - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=211118" -TARGET="_top" ->support forum at SourceForge</A -> - is probably best suited: - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=211118" -TARGET="_top" ->http://sourceforge.net/tracker/?group_id=11118&atid=211118</A -></P -><P -> All users are of course welcome to discuss their issues on the <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-users" -TARGET="_top" ->users - mailing list</A ->, where the developers also hang around.</P -><P -> Please don't sent private support requests to individual Privoxy - developers, either use the mailing lists or the support trackers.</P -><P -> Note that the Privoxy mailing lists are moderated. Posts from unsubscribed - addresses have to be accepted manually by a moderator. This may cause a - delay of several days and if you use a subject that doesn't clearly - mention Privoxy or one of its features, your message may be accidentally - discarded as spam.</P -><P -> If you aren't subscribed, you should therefore spend a few seconds - to come up with a proper subject. Additionally you should make it clear - that you want to get CC'd. Otherwise some responses will be directed to - the mailing list only, and you won't see them.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="REPORTING" ->11.2. Reporting Problems</A -></H2 -><P -><SPAN -CLASS="QUOTE" ->"Problems"</SPAN -> for our purposes, come in two forms:</P -><P -></P -><UL -><LI -><P -> Configuration issues, such as ads that slip through, or sites that - don't function properly due to one <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - <SPAN -CLASS="QUOTE" ->"action"</SPAN -> or another being turned <SPAN -CLASS="QUOTE" ->"on"</SPAN ->. - </P -></LI -><LI -><P -> <SPAN -CLASS="QUOTE" ->"Bugs"</SPAN -> in the programming code that makes up - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, such as that might cause a crash. - </P -></LI -></UL -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="CONTACT-ADS" ->11.2.1. Reporting Ads or Other Configuration Problems</A -></H3 -><P -> Please send feedback on ads that slipped through, innocent images that were - blocked, sites that don't work properly, and other configuration related problem of - <TT -CLASS="FILENAME" ->default.action</TT -> file, to - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=460288" -TARGET="_top" -> http://sourceforge.net/tracker/?group_id=11118&atid=460288</A ->, - the Actions File Tracker.</P -><P -> New, improved <TT -CLASS="FILENAME" ->default.action</TT -> files may occasionally be made - available based on your feedback. These will be announced on the <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce" -TARGET="_top" ->ijbswa-announce</A -> - list and available from our the <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->files section</A -> of - our <A -HREF="http://sf.net/projects/ijbswa/" -TARGET="_top" ->project page</A ->.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="CONTACT-BUGS" ->11.2.2. Reporting Bugs</A -></H3 -><P -> Please report all bugs through our bug tracker: - <A -HREF="http://sourceforge.net/tracker/?group_id=11118&atid=111118" -TARGET="_top" ->http://sourceforge.net/tracker/?group_id=11118&atid=111118</A ->. </P -><P -> Before doing so, please make sure that the bug has <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not already been submitted</I -></SPAN -> - and observe the additional hints at the top of the <A -HREF="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=111118" -TARGET="_top" ->submit - form</A ->. If already submitted, please feel free to add any info to the - original report that might help to solve the issue.</P -><P -> Please try to verify that it is a <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> bug, - and not a browser or site bug or documented behaviour that just happens - to be different than what you expected. If unsure, - try <A -HREF="http://config.privoxy.org/toggle?set=disable" -TARGET="_top" ->toggling - off</A -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, and see if the problem persists.</P -><P -> If you are using your own custom configuration, please try - the stock configs to see if the problem is configuration related. - If you're having problems with a feature that is disabled by default, - please ask around on the mailing list if others can reproduce the problem.</P -><P -> If you aren't using the latest Privoxy version, the bug may have been found - and fixed in the meantime. We would appreciate if you could take the time - to <A -HREF="http://www.privoxy.org/user-manual/installation.html" -TARGET="_top" ->upgrade - to the latest version</A -> (or even the latest CVS snapshot) and verify - that your bug still exists.</P -><P ->Please be sure to provide the following information:</P -><P -> <P -></P -><UL -><LI -><P -> The exact <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version you are using - (if you got the source from CVS, please also provide the source code revisions - as shown in <A -HREF="http://config.privoxy.org/show-version" -TARGET="_top" ->http://config.privoxy.org/show-version</A ->). - </P -></LI -><LI -><P -> The operating system and versions you run - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on, (e.g. <SPAN -CLASS="APPLICATION" ->Windows - XP SP2</SPAN ->), if you are using a Unix flavor, - sending the output of <SPAN -CLASS="QUOTE" ->"uname -a"</SPAN -> should do, - in case of GNU/Linux, please also name the distribution. - </P -></LI -><LI -><P -> The name, platform, and version of the <SPAN -CLASS="APPLICATION" ->browser</SPAN -> - you were using (e.g. <SPAN -CLASS="APPLICATION" ->Internet Explorer v5.5</SPAN -> for Mac). - </P -></LI -><LI -><P -> The URL where the problem occurred, or some way for us to duplicate the - problem (e.g. <TT -CLASS="LITERAL" ->http://somesite.example.com/?somethingelse=123</TT ->). - </P -></LI -><LI -><P -> Whether your version of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is one supplied - by the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developers via SourceForge, - or if you got your copy somewhere else. - </P -></LI -><LI -><P -> Whether you are using <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in tandem with - another proxy such as <SPAN -CLASS="APPLICATION" ->Tor</SPAN ->. If so, please - temporary disable the other proxy to see if the symptoms change. - </P -></LI -><LI -><P -> Whether you are using a personal firewall product. If so, does - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> work without it? - </P -></LI -><LI -><P -> Any other pertinent information to help identify the problem such as config - or log file excerpts (yes, you should have log file entries for each - action taken). - </P -></LI -></UL -></P -><P -> You don't have to tell us your actual name when filing a problem - report, but please use a nickname so we can differentiate between - your messages and the ones entered by other "anonymous" users that - may respond to your request if they have the same problem or already - found a solution.</P -><P -> Please also check the status of your request a few days after submitting - it, as we may request additional information. If you use a SF id, - you should automatically get a mail when someone responds to your request.</P -><P -> The <A -HREF="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT" -TARGET="_top" ->appendix - of the Privoxy User Manual</A -> also has helpful information - on understanding <TT -CLASS="LITERAL" ->actions</TT ->, and <TT -CLASS="LITERAL" ->action</TT -> debugging. </P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-FEATURE" ->11.3. Request New Features</A -></H2 -><P -> You are welcome to submit ideas on new features or other proposals - for improvement through our feature request tracker at - <A -HREF="http://sourceforge.net/tracker/?atid=361118&group_id=11118" -TARGET="_top" ->http://sourceforge.net/tracker/?atid=361118&group_id=11118</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CONTACT-OTHER" ->11.4. Other</A -></H2 -><P ->For any other issues, feel free to use the mailing lists. Technically interested users -and people who wish to contribute to the project are also welcome on the developers list! -You can find an overview of all <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->-related mailing lists, -including list archives, at: -<A -HREF="http://sourceforge.net/mail/?group_id=11118" -TARGET="_top" ->http://sourceforge.net/mail/?group_id=11118</A ->.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="templates.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="copyright.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Privoxy's Template Files</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Privoxy Copyright, License and History</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/copyright.html b/external/privoxy/doc/webserver/user-manual/copyright.html deleted file mode 100644 index b2e1e96..0000000 --- a/external/privoxy/doc/webserver/user-manual/copyright.html +++ /dev/null @@ -1,424 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy Copyright, License and History</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Contacting the Developers, Bug Reporting and Feature -Requests" -HREF="contact.html"><LINK -REL="NEXT" -TITLE="See Also" -HREF="seealso.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="contact.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="seealso.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="COPYRIGHT" ->12. Privoxy Copyright, License and History</A -></H1 -><P -> Copyright © 2001-2009 by Privoxy Developers <CODE -CLASS="EMAIL" -><<A -HREF="mailto:ijbswa-developers@lists.sourceforge.net" ->ijbswa-developers(a)lists.sourceforge.net</A ->></CODE -></P -><P -> Some source code is based on code Copyright © 1997 by Anonymous Coders - and Junkbusters, Inc. and licensed under the <I -CLASS="CITETITLE" ->GNU General Public - License</I ->.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN4921" ->12.1. License</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is free software; you can - redistribute it and/or modify it under the terms of the - <I -CLASS="CITETITLE" ->GNU General Public License</I ->, version 2, - as published by the Free Software Foundation.</P -><P -> This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" -> <I -CLASS="CITETITLE" ->GNU General Public License</I -></A -> for details.</P -><P -> You should have received a copy of the <I -CLASS="CITETITLE" ->GNU GPL</I -> - along with this program; if not, write to the <P -CLASS="ADDRESS" -> Free Software<br> - Foundation, Inc. <SPAN -CLASS="STREET" ->51 Franklin Street, Fifth Floor</SPAN -><br> - <SPAN -CLASS="CITY" ->Boston</SPAN ->, <SPAN -CLASS="STATE" ->MA</SPAN -> <SPAN -CLASS="POSTCODE" ->02110-1301</SPAN -><br> - <SPAN -CLASS="COUNTRY" ->USA</SPAN -> </P -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="HISTORY" ->12.2. History</A -></H2 -><P -> A long time ago, there was the - <A -HREF="http://www.junkbusters.com/ijb.html" -TARGET="_top" -><SPAN -CLASS="APPLICATION" ->Internet Junkbuster</SPAN -></A ->, - by Anonymous Coders and <A -HREF="http://www.junkbusters.com/" -TARGET="_top" ->Junkbusters - Corporation</A ->. This saved many users a lot of pain in the early days of - web advertising and user tracking.</P -><P -> But the web, its protocols and standards, and with it, the techniques for - forcing ads on users, give up autonomy over their browsing, and - for tracking them, keeps evolving. Unfortunately, the <SPAN -CLASS="APPLICATION" ->Internet - Junkbuster</SPAN -> did not. Version 2.0.2, published in 1998, was - (and is) the last official - <A -HREF="http://www.junkbusters.com/ijbdist.html#release" -TARGET="_top" ->release</A -> - available from <A -HREF="http://www.junkbusters.com" -TARGET="_top" ->Junkbusters Corporation</A ->. - Fortunately, it had been released under the GNU - <A -HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html" -TARGET="_top" ->GPL</A ->, - which allowed further development by others.</P -><P -> So Stefan Waldherr started maintaining an improved version of the - software, to which eventually a number of people contributed patches. - It could already replace banners with a transparent image, and had a first - version of pop-up killing, but it was still very closely based on the - original, with all its limitations, such as the lack of HTTP/1.1 support, - flexible per-site configuration, or content modification. The last release - from this effort was version 2.0.2-10, published in 2000.</P -><P -> Then, some - <A -HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS" -TARGET="_top" ->developers</A -> - picked up the thread, and started turning the software inside out, upside down, - and then reassembled it, adding many - <A -HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES" -TARGET="_top" ->new - features</A -> along the way.</P -><P -> The result of this is <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, whose first - stable version, 3.0, was released August, 2002. - </P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AUTHORS" ->12.3. Authors</A -></H2 -><P ->Current Privoxy Team:</P -><P -CLASS="LITERALLAYOUT" -> Fabian Keil, lead developer<br> - David Schmidt, developer<br> -<br> - Hal Burgiss<br> - Mark Miller<br> - Gerry Murphy<br> - Lee Rian<br> - Roland Rosenfeld<br> - Jörg Strohmayer</P -><P -> Former Privoxy Team Members:</P -><P -CLASS="LITERALLAYOUT" -> Johny Agotnes<br> - Rodrigo Barbosa<br> - Moritz Barsnick<br> - Ian Cummings<br> - Brian Dessent<br> - Jon Foster<br> - Karsten Hopp<br> - Alexander Lazic<br> - Daniel Leite<br> - Gábor Lipták<br> - Adam Lock<br> - Guy Laroche<br> - Justin McMurtry<br> - Andreas Oesterhelt<br> - Haroon Rafique<br> - Georg Sauthoff<br> - Thomas Steudten<br> - Rodney Stromlund<br> - Sviatoslav Sviridov<br> - Sarantis Paskalis<br> - Stefan Waldherr</P -><P -> Thanks to the many people who have tested Privoxy, reported bugs, provided - patches, made suggestions or contributed in some way. These include (in - alphabetical order):</P -><P -CLASS="LITERALLAYOUT" -> Ken Arromdee<br> - Devin Bayer<br> - Gergely Bor<br> - Reiner Buehl<br> - Andrew J. Caines<br> - Clifford Caoile<br> - Frédéric Crozat<br> - Michael T. Davis<br> - Mattes Dolak<br> - Matthias Drochner<br> - Peter E.<br> - Florian Effenberger<br> - Markus Elfring<br> - Dean Gaudet<br> - Stephen Gildea<br> - Daniel Griscom<br> - Felix Gröbert<br> - Aaron Hamid<br> - Darel Henman<br> - Magnus Holmgren<br> - Eric M. Hopper<br> - Ralf Horstmann<br> - Stefan Huehner<br> - Peter Hyman<br> - Derek Jennings<br> - Petr Kadlec<br> - David Laight<br> - Bert van Leeuwen<br> - Don Libes<br> - Paul Lieverse<br> - Toby Lyward<br> - Wil Mahan<br> - Jindrich Makovicka<br> - David Mediavilla<br> - Raphael Moll<br> - Amuro Namie<br> - Adam Piggott<br> - Dan Price<br> - Roberto Ragusa<br> - Félix Rauch<br> - Maynard Riley<br> - Chung-chieh Shan<br> - Spinor S.<br> - Bart Schelstraete<br> - Oliver Stoeneberg<br> - Peter Thoenen<br> - Martin Thomas<br> - Bobby G. Vinyard<br> - Jochen Voss<br> - Glenn Washburn<br> - Song Weijia<br> - Jörg Weinmann<br> - Darren Wiebe<br> - Anduin Withers<br> - Oliver Yeoh<br> - Jamie Zawinski</P -><P -> Privoxy is based in part on code originally developed by - Junkbusters Corp. and Anonymous Coders.</P -><P -> Privoxy heavily relies on Philip Hazel's PCRE.</P -><P -> The code to filter compressed content makes use of zlib - which is written by Jean-loup Gailly and Mark Adler.</P -><P -> On systems that lack snprintf(), Privoxy is using a version - written by Mark Martinec. On systems that lack strptime(), - Privoxy is using the one from the GNU C Library written - by Ulrich Drepper.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="contact.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="seealso.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Contacting the Developers, Bug Reporting and Feature -Requests</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->See Also</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/files-in-use.jpg b/external/privoxy/doc/webserver/user-manual/files-in-use.jpg deleted file mode 100644 index 207b6f7..0000000 Binary files a/external/privoxy/doc/webserver/user-manual/files-in-use.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/user-manual/filter-file.html b/external/privoxy/doc/webserver/user-manual/filter-file.html deleted file mode 100644 index 3a2ec3a..0000000 --- a/external/privoxy/doc/webserver/user-manual/filter-file.html +++ /dev/null @@ -1,1652 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Filter Files</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Actions Files" -HREF="actions-file.html"><LINK -REL="NEXT" -TITLE="Privoxy's Template Files" -HREF="templates.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="actions-file.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="templates.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="FILTER-FILE" ->9. Filter Files</A -></H1 -><P -> On-the-fly text substitutions need - to be defined in a <SPAN -CLASS="QUOTE" ->"filter file"</SPAN ->. Once defined, they - can then be invoked as an <SPAN -CLASS="QUOTE" ->"action"</SPAN ->.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> supports three different filter actions: - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filter</A -></TT -> to - rewrite the content that is send to the client, - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CLIENT-HEADER-FILTER" ->client-header-filter</A -></TT -> - to rewrite headers that are send by the client, and - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SERVER-HEADER-FILTER" ->server-header-filter</A -></TT -> - to rewrite headers that are send by the server.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> also supports two tagger actions: - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CLIENT-HEADER-TAGGER" ->client-header-tagger</A -></TT -> - and - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SERVER-HEADER-TAGGER" ->server-header-tagger</A -></TT ->. - Taggers and filters use the same syntax in the filter files, the difference - is that taggers don't modify the text they are filtering, but use a rewritten - version of the filtered text as tag. The tags can then be used to change the - applying actions through sections with <A -HREF="actions-file.html#TAG-PATTERN" ->tag-patterns</A ->.</P -><P -> Multiple filter files can be defined through the <TT -CLASS="LITERAL" -> <A -HREF="config.html#FILTERFILE" ->filterfile</A -></TT -> config directive. The filters - as supplied by the developers are located in - <TT -CLASS="FILENAME" ->default.filter</TT ->. It is recommended that any locally - defined or modified filters go in a separately defined file such as - <TT -CLASS="FILENAME" ->user.filter</TT ->. - </P -><P -> Common tasks for content filters are to eliminate common annoyances in - HTML and JavaScript, such as pop-up windows, - exit consoles, crippled windows without navigation tools, the - infamous <BLINK> tag etc, to suppress images with certain - width and height attributes (standard banner sizes or web-bugs), - or just to have fun.</P -><P -> Enabled content filters are applied to any content whose - <SPAN -CLASS="QUOTE" ->"Content Type"</SPAN -> header is recognised as a sign - of text-based content, with the exception of <TT -CLASS="LITERAL" ->text/plain</TT ->. - Use the <A -HREF="actions-file.html#FORCE-TEXT-MODE" ->force-text-mode</A -> action - to also filter other content.</P -><P -> Substitutions are made at the source level, so if you want to <SPAN -CLASS="QUOTE" ->"roll - your own"</SPAN -> filters, you should first be familiar with HTML syntax, - and, of course, regular expressions.</P -><P -> Just like the <A -HREF="actions-file.html" ->actions files</A ->, the - filter file is organized in sections, which are called <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->filters</I -></SPAN -> - here. Each filter consists of a heading line, that starts with one of the - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->keywords</I -></SPAN -> <TT -CLASS="LITERAL" ->FILTER:</TT ->, - <TT -CLASS="LITERAL" ->CLIENT-HEADER-FILTER:</TT -> or <TT -CLASS="LITERAL" ->SERVER-HEADER-FILTER:</TT -> - followed by the filter's <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->name</I -></SPAN ->, and a short (one line) - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->description</I -></SPAN -> of what it does. Below that line - come the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->jobs</I -></SPAN ->, i.e. lines that define the actual - text substitutions. By convention, the name of a filter - should describe what the filter <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->eliminates</I -></SPAN ->. The - comment is used in the <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->web-based - user interface</A ->.</P -><P -> Once a filter called <TT -CLASS="REPLACEABLE" -><I ->name</I -></TT -> has been defined - in the filter file, it can be invoked by using an action of the form - +<TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filter</A ->{<TT -CLASS="REPLACEABLE" -><I ->name</I -></TT ->}</TT -> - in any <A -HREF="actions-file.html" ->actions file</A ->.</P -><P -> Filter definitions start with a header line that contains the filter - type, the filter name and the filter description. - A content filter header line for a filter called <SPAN -CLASS="QUOTE" ->"foo"</SPAN -> could look - like this:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->FILTER: foo Replace all "foo" with "bar"</PRE -></TD -></TR -></TABLE -></P -><P -> Below that line, and up to the next header line, come the jobs that - define what text replacements the filter executes. They are specified - in a syntax that imitates <A -HREF="http://www.perl.org/" -TARGET="_top" ->Perl</A ->'s - <TT -CLASS="LITERAL" ->s///</TT -> operator. If you are familiar with Perl, you - will find this to be quite intuitive, and may want to look at the - PCRS documentation for the subtle differences to Perl behaviour. Most - notably, the non-standard option letter <TT -CLASS="LITERAL" ->U</TT -> is supported, - which turns the default to ungreedy matching.</P -><P -> If you are new to - <A -HREF="http://en.wikipedia.org/wiki/Regular_expressions" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"Regular - Expressions"</SPAN -></A ->, you might want to take a look at - the <A -HREF="appendix.html#REGEX" ->Appendix on regular expressions</A ->, and - see the <A -HREF="http://perldoc.perl.org/perlre.html" -TARGET="_top" ->Perl - manual</A -> for - <A -HREF="http://perldoc.perl.org/perlop.html" -TARGET="_top" ->the - <TT -CLASS="LITERAL" ->s///</TT -> operator's syntax</A -> and <A -HREF="http://perldoc.perl.org/perlre.html" -TARGET="_top" ->Perl-style regular - expressions</A -> in general. - The below examples might also help to get you started.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="AEN4447" ->9.1. Filter File Tutorial</A -></H2 -><P -> Now, let's complete our <SPAN -CLASS="QUOTE" ->"foo"</SPAN -> content filter. We have already defined - the heading, but the jobs are still missing. Since all it does is to replace - <SPAN -CLASS="QUOTE" ->"foo"</SPAN -> with <SPAN -CLASS="QUOTE" ->"bar"</SPAN ->, there is only one (trivial) job - needed:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->s/foo/bar/</PRE -></TD -></TR -></TABLE -></P -><P -> But wait! Didn't the comment say that <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> occurrences - of <SPAN -CLASS="QUOTE" ->"foo"</SPAN -> should be replaced? Our current job will only take - care of the first <SPAN -CLASS="QUOTE" ->"foo"</SPAN -> on each page. For global substitution, - we'll need to add the <TT -CLASS="LITERAL" ->g</TT -> option:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->s/foo/bar/g</PRE -></TD -></TR -></TABLE -></P -><P -> Our complete filter now looks like this:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->FILTER: foo Replace all "foo" with "bar" -s/foo/bar/g</PRE -></TD -></TR -></TABLE -></P -><P -> Let's look at some real filters for more interesting examples. Here you see - a filter that protects against some common annoyances that arise from JavaScript - abuse. Let's look at its jobs one after the other:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->FILTER: js-annoyances Get rid of particularly annoying JavaScript abuse - -# Get rid of JavaScript referrer tracking. Test page: http://www.randomoddness.com/untitled.htm -# -s|(<script.*)document\.referrer(.*</script>)|$1"Not Your Business!"$2|Usg</PRE -></TD -></TR -></TABLE -></P -><P -> Following the header line and a comment, you see the job. Note that it uses - <TT -CLASS="LITERAL" ->|</TT -> as the delimiter instead of <TT -CLASS="LITERAL" ->/</TT ->, because - the pattern contains a forward slash, which would otherwise have to be escaped - by a backslash (<TT -CLASS="LITERAL" ->\</TT ->).</P -><P -> Now, let's examine the pattern: it starts with the text <TT -CLASS="LITERAL" -><script.*</TT -> - enclosed in parentheses. Since the dot matches any character, and <TT -CLASS="LITERAL" ->*</TT -> - means: <SPAN -CLASS="QUOTE" ->"Match an arbitrary number of the element left of myself"</SPAN ->, this - matches <SPAN -CLASS="QUOTE" ->"<script"</SPAN ->, followed by <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->any</I -></SPAN -> text, i.e. - it matches the whole page, from the start of the first <script> tag.</P -><P -> That's more than we want, but the pattern continues: <TT -CLASS="LITERAL" ->document\.referrer</TT -> - matches only the exact string <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN ->. The dot needed to - be <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->escaped</I -></SPAN ->, i.e. preceded by a backslash, to take away its - special meaning as a joker, and make it just a regular dot. So far, the meaning is: - Match from the start of the first <script> tag in a the page, up to, and including, - the text <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN ->, if <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->both</I -></SPAN -> are present - in the page (and appear in that order).</P -><P -> But there's still more pattern to go. The next element, again enclosed in parentheses, - is <TT -CLASS="LITERAL" ->.*</script></TT ->. You already know what <TT -CLASS="LITERAL" ->.*</TT -> - means, so the whole pattern translates to: Match from the start of the first <script> - tag in a page to the end of the last <script> tag, provided that the text - <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN -> appears somewhere in between.</P -><P -> This is still not the whole story, since we have ignored the options and the parentheses: - The portions of the page matched by sub-patterns that are enclosed in parentheses, will be - remembered and be available through the variables <TT -CLASS="LITERAL" ->$1, $2, ...</TT -> in - the substitute. The <TT -CLASS="LITERAL" ->U</TT -> option switches to ungreedy matching, which means - that the first <TT -CLASS="LITERAL" ->.*</TT -> in the pattern will only <SPAN -CLASS="QUOTE" ->"eat up"</SPAN -> all - text in between <SPAN -CLASS="QUOTE" ->"<script"</SPAN -> and the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->first</I -></SPAN -> occurrence - of <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN ->, and that the second <TT -CLASS="LITERAL" ->.*</TT -> will - only span the text up to the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->first</I -></SPAN -> <SPAN -CLASS="QUOTE" ->"</script>"</SPAN -> - tag. Furthermore, the <TT -CLASS="LITERAL" ->s</TT -> option says that the match may span - multiple lines in the page, and the <TT -CLASS="LITERAL" ->g</TT -> option again means that the - substitution is global.</P -><P -> So, to summarize, the pattern means: Match all scripts that contain the text - <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN ->. Remember the parts of the script from - (and including) the start tag up to (and excluding) the string - <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN -> as <TT -CLASS="LITERAL" ->$1</TT ->, and the part following - that string, up to and including the closing tag, as <TT -CLASS="LITERAL" ->$2</TT ->.</P -><P -> Now the pattern is deciphered, but wasn't this about substituting things? So - lets look at the substitute: <TT -CLASS="LITERAL" ->$1"Not Your Business!"$2</TT -> is - easy to read: The text remembered as <TT -CLASS="LITERAL" ->$1</TT ->, followed by - <TT -CLASS="LITERAL" ->"Not Your Business!"</TT -> (<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->including</I -></SPAN -> - the quotation marks!), followed by the text remembered as <TT -CLASS="LITERAL" ->$2</TT ->. - This produces an exact copy of the original string, with the middle part - (the <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN ->) replaced by <TT -CLASS="LITERAL" ->"Not Your - Business!"</TT ->.</P -><P -> The whole job now reads: Replace <SPAN -CLASS="QUOTE" ->"document.referrer"</SPAN -> by - <TT -CLASS="LITERAL" ->"Not Your Business!"</TT -> wherever it appears inside a - <script> tag. Note that this job won't break JavaScript syntax, - since both the original and the replacement are syntactically valid - string objects. The script just won't have access to the referrer - information anymore.</P -><P -> We'll show you two other jobs from the JavaScript taming department, but - this time only point out the constructs of special interest:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># The status bar is for displaying link targets, not pointless blahblah -# -s/window\.status\s*=\s*(['"]).*?\1/dUmMy=1/ig</PRE -></TD -></TR -></TABLE -></P -><P -> <TT -CLASS="LITERAL" ->\s</TT -> stands for whitespace characters (space, tab, newline, - carriage return, form feed), so that <TT -CLASS="LITERAL" ->\s*</TT -> means: <SPAN -CLASS="QUOTE" ->"zero - or more whitespace"</SPAN ->. The <TT -CLASS="LITERAL" ->?</TT -> in <TT -CLASS="LITERAL" ->.*?</TT -> - makes this matching of arbitrary text ungreedy. (Note that the <TT -CLASS="LITERAL" ->U</TT -> - option is not set). The <TT -CLASS="LITERAL" ->['"]</TT -> construct means: <SPAN -CLASS="QUOTE" ->"a single - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->or</I -></SPAN -> a double quote"</SPAN ->. Finally, <TT -CLASS="LITERAL" ->\1</TT -> is - a back-reference to the first parenthesis just like <TT -CLASS="LITERAL" ->$1</TT -> above, - with the difference that in the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->pattern</I -></SPAN ->, a backslash indicates - a back-reference, whereas in the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->substitute</I -></SPAN ->, it's the dollar.</P -><P -> So what does this job do? It replaces assignments of single- or double-quoted - strings to the <SPAN -CLASS="QUOTE" ->"window.status"</SPAN -> object with a dummy assignment - (using a variable name that is hopefully odd enough not to conflict with - real variables in scripts). Thus, it catches many cases where e.g. pointless - descriptions are displayed in the status bar instead of the link target when - you move your mouse over links.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Kill OnUnload popups. Yummy. Test: http://www.zdnet.com/zdsubs/yahoo/tree/yfs.html -# -s/(<body [^>]*)onunload(.*>)/$1never$2/iU</PRE -></TD -></TR -></TABLE -></P -><P -> Including the - <A -HREF="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Event…" -TARGET="_top" ->OnUnload - event binding</A -> in the HTML DOM was a <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->CRIME</I -></SPAN ->. - When I close a browser window, I want it to close and die. Basta. - This job replaces the <SPAN -CLASS="QUOTE" ->"onunload"</SPAN -> attribute in - <SPAN -CLASS="QUOTE" ->"<body>"</SPAN -> tags with the dummy word <TT -CLASS="LITERAL" ->never</TT ->. - Note that the <TT -CLASS="LITERAL" ->i</TT -> option makes the pattern matching - case-insensitive. Also note that ungreedy matching alone doesn't always guarantee - a minimal match: In the first parenthesis, we had to use <TT -CLASS="LITERAL" ->[^>]*</TT -> - instead of <TT -CLASS="LITERAL" ->.*</TT -> to prevent the match from exceeding the - <body> tag if it doesn't contain <SPAN -CLASS="QUOTE" ->"OnUnload"</SPAN ->, but the page's - content does.</P -><P -> The last example is from the fun department:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" ->FILTER: fun Fun text replacements - -# Spice the daily news: -# -s/microsoft(?!\.com)/MicroSuck/ig</PRE -></TD -></TR -></TABLE -></P -><P -> Note the <TT -CLASS="LITERAL" ->(?!\.com)</TT -> part (a so-called negative lookahead) - in the job's pattern, which means: Don't match, if the string - <SPAN -CLASS="QUOTE" ->".com"</SPAN -> appears directly following <SPAN -CLASS="QUOTE" ->"microsoft"</SPAN -> - in the page. This prevents links to microsoft.com from being trashed, while - still replacing the word everywhere else.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -># Buzzword Bingo (example for extended regex syntax) -# -s* industry[ -]leading \ -| cutting[ -]edge \ -| customer[ -]focused \ -| market[ -]driven \ -| award[ -]winning # Comments are OK, too! \ -| high[ -]performance \ -| solutions[ -]based \ -| unmatched \ -| unparalleled \ -| unrivalled \ -*<font color="red"><b>BINGO!</b></font> \ -*igx</PRE -></TD -></TR -></TABLE -></P -><P -> The <TT -CLASS="LITERAL" ->x</TT -> option in this job turns on extended syntax, and allows for - e.g. the liberal use of (non-interpreted!) whitespace for nicer formatting. </P -><P -> You get the idea?</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="PREDEFINED-FILTERS" ->9.2. The Pre-defined Filters</A -></H2 -><P ->The distribution <TT -CLASS="FILENAME" ->default.filter</TT -> file contains a selection of -pre-defined filters for your convenience:</P -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->js-annoyances</I -></SPAN -></DT -><DD -><P -> The purpose of this filter is to get rid of particularly annoying JavaScript abuse. - To that end, it - <P -></P -><UL -><LI -><P -> replaces JavaScript references to the browser's referrer information - with the string "Not Your Business!". This compliments the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HIDE-REFERRER" ->hide-referrer</A -></TT -> action on the content level. - </P -></LI -><LI -><P -> removes the bindings to the DOM's - <A -HREF="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Event…" -TARGET="_top" ->unload - event</A -> which we feel has no right to exist and is responsible for most <SPAN -CLASS="QUOTE" ->"exit consoles"</SPAN ->, i.e. - nasty windows that pop up when you close another one. - </P -></LI -><LI -><P -> removes code that causes new windows to be opened with undesired properties, such as being - full-screen, non-resizeable, without location, status or menu bar etc. - </P -></LI -></UL -> - </P -><P -> Use with caution. This is an aggressive filter, and can break sites that - rely heavily on JavaScript. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->js-events</I -></SPAN -></DT -><DD -><P -> This is a very radical measure. It removes virtually all JavaScript event bindings, which - means that scripts can not react to user actions such as mouse movements or clicks, window - resizing etc, anymore. Use with caution! - </P -><P -> We <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->strongly discourage</I -></SPAN -> using this filter as a default since it breaks - many legitimate scripts. It is meant for use only on extra-nasty sites (should you really - need to go there). - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->html-annoyances</I -></SPAN -></DT -><DD -><P -> This filter will undo many common instances of HTML based abuse. - </P -><P -> The <TT -CLASS="LITERAL" ->BLINK</TT -> and <TT -CLASS="LITERAL" ->MARQUEE</TT -> tags - are neutralized (yeah baby!), and browser windows will be created as - resizeable (as of course they should be!), and will have location, - scroll and menu bars -- even if specified otherwise. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->content-cookies</I -></SPAN -></DT -><DD -><P -> Most cookies are set in the HTTP dialog, where they can be intercepted - by the - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -></TT -> - and <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -></TT -> - actions. But web sites increasingly make use of HTML meta tags and JavaScript - to sneak cookies to the browser on the content level. - </P -><P -> This filter disables most HTML and JavaScript code that reads or sets - cookies. It cannot detect all clever uses of these types of code, so it - should not be relied on as an absolute fix. Use it wherever you would also - use the cookie crunch actions. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->refresh tags</I -></SPAN -></DT -><DD -><P -> Disable any refresh tags if the interval is greater than nine seconds (so - that redirections done via refresh tags are not destroyed). This is useful - for dial-on-demand setups, or for those who find this HTML feature - annoying. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->unsolicited-popups</I -></SPAN -></DT -><DD -><P -> This filter attempts to prevent only <SPAN -CLASS="QUOTE" ->"unsolicited"</SPAN -> pop-up - windows from opening, yet still allow pop-up windows that the user - has explicitly chosen to open. It was added in version 3.0.1, - as an improvement over earlier such filters. - </P -><P -> Technical note: The filter works by redefining the window.open JavaScript - function to a dummy function, <TT -CLASS="LITERAL" ->PrivoxyWindowOpen()</TT ->, - during the loading and rendering phase of each HTML page access, and - restoring the function afterward. - </P -><P -> This is recommended only for browsers that cannot perform this function - reliably themselves. And be aware that some sites require such windows - in order to function normally. Use with caution. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all-popups</I -></SPAN -></DT -><DD -><P -> Attempt to prevent <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> pop-up windows from opening. - Note this should be used with even more discretion than the above, since - it is more likely to break some sites that require pop-ups for normal - usage. Use with caution. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->img-reorder</I -></SPAN -></DT -><DD -><P -> This is a helper filter that has no value if used alone. It makes the - <TT -CLASS="LITERAL" ->banners-by-size</TT -> and <TT -CLASS="LITERAL" ->banners-by-link</TT -> - (see below) filters more effective and should be enabled together with them. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->banners-by-size</I -></SPAN -></DT -><DD -><P -> This filter removes image tags purely based on what size they are. Fortunately - for us, many ads and banner images tend to conform to certain standardized - sizes, which makes this filter quite effective for ad stripping purposes. - </P -><P -> Occasionally this filter will cause false positives on images that are not ads, - but just happen to be of one of the standard banner sizes. - </P -><P -> Recommended only for those who require extreme ad blocking. The default - block rules should catch 95+% of all ads <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->without</I -></SPAN -> this filter enabled. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->banners-by-link</I -></SPAN -></DT -><DD -><P -> This is an experimental filter that attempts to kill any banners if - their URLs seem to point to known or suspected click trackers. It is currently - not of much value and is not recommended for use by default. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->webbugs</I -></SPAN -></DT -><DD -><P -> Webbugs are small, invisible images (technically 1X1 GIF images), that - are used to track users across websites, and collect information on them. - As an HTML page is loaded by the browser, an embedded image tag causes the - browser to contact a third-party site, disclosing the tracking information - through the requested URL and/or cookies for that third-party domain, without - the user ever becoming aware of the interaction with the third-party site. - HTML-ized spam also uses a similar technique to verify email addresses. - </P -><P -> This filter removes the HTML code that loads such <SPAN -CLASS="QUOTE" ->"webbugs"</SPAN ->. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->tiny-textforms</I -></SPAN -></DT -><DD -><P -> A rather special-purpose filter that can be used to enlarge textareas (those - multi-line text boxes in web forms) and turn off hard word wrap in them. - It was written for the sourceforge.net tracker system where such boxes are - a nuisance, but it can be handy on other sites, too. - </P -><P -> It is not recommended to use this filter as a default. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->jumping-windows</I -></SPAN -></DT -><DD -><P -> Many consider windows that move, or resize themselves to be abusive. This filter - neutralizes the related JavaScript code. Note that some sites might not display - or behave as intended when using this filter. Use with caution. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->frameset-borders</I -></SPAN -></DT -><DD -><P -> Some web designers seem to assume that everyone in the world will view their - web sites using the same browser brand and version, screen resolution etc, - because only that assumption could explain why they'd use static frame sizes, - yet prevent their frames from being resized by the user, should they be too - small to show their whole content. - </P -><P -> This filter removes the related HTML code. It should only be applied to sites - which need it. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->demoronizer</I -></SPAN -></DT -><DD -><P -> Many Microsoft products that generate HTML use non-standard extensions (read: - violations) of the ISO 8859-1 aka Latin-1 character set. This can cause those - HTML documents to display with errors on standard-compliant platforms. - </P -><P -> This filter translates the MS-only characters into Latin-1 equivalents. - It is not necessary when using MS products, and will cause corruption of - all documents that use 8-bit character sets other than Latin-1. It's mostly - worthwhile for Europeans on non-MS platforms, if weird garbage characters - sometimes appear on some pages, or user agents that don't correct for this on - the fly. - - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->shockwave-flash</I -></SPAN -></DT -><DD -><P -> A filter for shockwave haters. As the name suggests, this filter strips code - out of web pages that is used to embed shockwave flash objects. - </P -><P -> </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->quicktime-kioskmode</I -></SPAN -></DT -><DD -><P -> Change HTML code that embeds Quicktime objects so that kioskmode, which - prevents saving, is disabled. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->fun</I -></SPAN -></DT -><DD -><P -> Text replacements for subversive browsing fun. Make fun of your favorite - Monopolist or play buzzword bingo. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->crude-parental</I -></SPAN -></DT -><DD -><P -> A demonstration-only filter that shows how <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - can be used to delete web content on a keyword basis. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->ie-exploits</I -></SPAN -></DT -><DD -><P -> An experimental collection of text replacements to disable malicious HTML and JavaScript - code that exploits known security holes in Internet Explorer. - </P -><P -> Presently, it only protects against Nimda and a cross-site scripting bug, and - would need active maintenance to provide more substantial protection. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->site-specifics</I -></SPAN -></DT -><DD -><P -> Some web sites have very specific problems, the cure for which doesn't apply - anywhere else, or could even cause damage on other sites. - </P -><P -> This is a collection of such site-specific cures which should only be applied - to the sites they were intended for, which is what the supplied - <TT -CLASS="FILENAME" ->default.action</TT -> file does. Users shouldn't need to change - anything regarding this filter. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->google</I -></SPAN -></DT -><DD -><P -> A CSS based block for Google text ads. Also removes a width limitation - and the toolbar advertisement. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->yahoo</I -></SPAN -></DT -><DD -><P -> Another CSS based block, this time for Yahoo text ads. And removes - a width limitation as well. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->msn</I -></SPAN -></DT -><DD -><P -> Another CSS based block, this time for MSN text ads. And removes - tracking URLs, as well as a width limitation. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->blogspot</I -></SPAN -></DT -><DD -><P -> Cleans up some Blogspot blogs. Read the fine print before using this one! - </P -><P -> This filter also intentionally removes some navigation stuff and sets the - page width to 100%. As a result, some rounded <SPAN -CLASS="QUOTE" ->"corners"</SPAN -> would - appear to early or not at all and as fixing this would require a browser - that understands background-size (CSS3), they are removed instead. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->xml-to-html</I -></SPAN -></DT -><DD -><P -> Server-header filter to change the Content-Type from xml to html. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->html-to-xml</I -></SPAN -></DT -><DD -><P -> Server-header filter to change the Content-Type from html to xml. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->no-ping</I -></SPAN -></DT -><DD -><P -> Removes the non-standard <TT -CLASS="LITERAL" ->ping</TT -> attribute from - anchor and area HTML tags. - </P -></DD -><DT -><SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->hide-tor-exit-notation</I -></SPAN -></DT -><DD -><P -> Client-header filter to remove the <B -CLASS="COMMAND" ->Tor</B -> exit node notation - found in Host and Referer headers. - </P -><P -> If <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> and <B -CLASS="COMMAND" ->Tor</B -> are chained and <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is configured to use socks4a, one can use <SPAN -CLASS="QUOTE" ->"http://www.example.org.foobar.exit/"</SPAN -> - to access the host <SPAN -CLASS="QUOTE" ->"www.example.org"</SPAN -> through the - <B -CLASS="COMMAND" ->Tor</B -> exit node <SPAN -CLASS="QUOTE" ->"foobar"</SPAN ->. - </P -><P -> As the HTTP client isn't aware of this notation, it treats the - whole string <SPAN -CLASS="QUOTE" ->"www.example.org.foobar.exit"</SPAN -> as host and uses it - for the <SPAN -CLASS="QUOTE" ->"Host"</SPAN -> and <SPAN -CLASS="QUOTE" ->"Referer"</SPAN -> headers. From the - server's point of view the resulting headers are invalid and can cause problems. - </P -><P -> An invalid <SPAN -CLASS="QUOTE" ->"Referer"</SPAN -> header can trigger <SPAN -CLASS="QUOTE" ->"hot-linking"</SPAN -> - protections, an invalid <SPAN -CLASS="QUOTE" ->"Host"</SPAN -> header will make it impossible for - the server to find the right vhost (several domains hosted on the same IP address). - </P -><P -> This client-header filter removes the <SPAN -CLASS="QUOTE" ->"foo.exit"</SPAN -> part in those headers - to prevent the mentioned problems. Note that it only modifies - the HTTP headers, it doesn't make it impossible for the server - to detect your <B -CLASS="COMMAND" ->Tor</B -> exit node based on the IP address - the request is coming from. - </P -></DD -></DL -></DIV -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="actions-file.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="templates.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Actions Files</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Privoxy's Template Files</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/index.html b/external/privoxy/doc/webserver/user-manual/index.html deleted file mode 100644 index 366386b..0000000 --- a/external/privoxy/doc/webserver/user-manual/index.html +++ /dev/null @@ -1,963 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy 3.0.12 User Manual</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="NEXT" -TITLE="Introduction" -HREF="introduction.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="ARTICLE" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="ARTICLE" -><DIV -CLASS="TITLEPAGE" -><H1 -CLASS="TITLE" -><A -NAME="AEN2" ->Privoxy 3.0.12 User Manual</A -></H1 -><P -CLASS="PUBDATE" -> <SUB -> <A -HREF="copyright.html" ->Copyright</A -> © 2001-2009 by - <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->Privoxy Developers</A -> - </SUB -><BR></P -><P -CLASS="PUBDATE" ->$Id: index.html,v 1.60 2009/03/21 12:58:53 fabiankeil Exp $<BR></P -><DIV -><DIV -CLASS="ABSTRACT" -><P -></P -><A -NAME="AEN9" -></A -><P -> The <I -CLASS="CITETITLE" ->Privoxy User Manual</I -> gives users information on how to - install, configure and use <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->Privoxy</A ->. - </P -><P -> Privoxy is a non-caching web proxy with advanced filtering capabilities - for enhancing privacy, modifying web page data and HTTP headers, controlling - access, and removing ads and other obnoxious Internet junk. Privoxy has a - flexible configuration and can be customized to suit individual needs and tastes. - It has application for both stand-alone systems and multi-user networks.</P -><P -> Privoxy is Free Software and licensed under the GPL2.</P -><P -> Privoxy is an associated project of Software in the Public Interest (SPI). - <A -HREF="http://www.privoxy.org/faq/general.html#DONATE" -TARGET="_top" ->Donations are welcome</A ->.</P -><P -> You can find the latest version of the <I -CLASS="CITETITLE" ->Privoxy User Manual</I -> at <A -HREF="http://www.privoxy.org/user-manual/" -TARGET="_top" ->http://www.privoxy.org/user-manual/</A ->. - Please see the <A -HREF="contact.html" ->Contact section</A -> on how to - contact the developers. - </P -><P -></P -></DIV -></DIV -><HR></DIV -><DIV -CLASS="TOC" -><DL -><DT -><B ->Table of Contents</B -></DT -><DT ->1. <A -HREF="introduction.html" ->Introduction</A -></DT -><DD -><DL -><DT ->1.1. <A -HREF="introduction.html#FEATURES" ->Features</A -></DT -></DL -></DD -><DT ->2. <A -HREF="installation.html" ->Installation</A -></DT -><DD -><DL -><DT ->2.1. <A -HREF="installation.html#INSTALLATION-PACKAGES" ->Binary Packages</A -></DT -><DD -><DL -><DT ->2.1.1. <A -HREF="installation.html#INSTALLATION-PACK-RPM" ->Red Hat and Fedora RPMs</A -></DT -><DT ->2.1.2. <A -HREF="installation.html#INSTALLATION-DEB" ->Debian and Ubuntu</A -></DT -><DT ->2.1.3. <A -HREF="installation.html#INSTALLATION-PACK-WIN" ->Windows</A -></DT -><DT ->2.1.4. <A -HREF="installation.html#INSTALLATION-PACK-BINTGZ" ->Solaris</A -></DT -><DT ->2.1.5. <A -HREF="installation.html#INSTALLATION-OS2" ->OS/2</A -></DT -><DT ->2.1.6. <A -HREF="installation.html#INSTALLATION-MAC" ->Mac OS X</A -></DT -><DT ->2.1.7. <A -HREF="installation.html#INSTALLATION-AMIGA" ->AmigaOS</A -></DT -><DT ->2.1.8. <A -HREF="installation.html#INSTALLATION-TBZ" ->FreeBSD</A -></DT -><DT ->2.1.9. <A -HREF="installation.html#INSTALLATTION-GENTOO" ->Gentoo</A -></DT -></DL -></DD -><DT ->2.2. <A -HREF="installation.html#INSTALLATION-SOURCE" ->Building from Source</A -></DT -><DT ->2.3. <A -HREF="installation.html#INSTALLATION-KEEPUPDATED" ->Keeping your Installation Up-to-Date</A -></DT -></DL -></DD -><DT ->3. <A -HREF="whatsnew.html" ->What's New in this Release</A -></DT -><DD -><DL -><DT ->3.1. <A -HREF="whatsnew.html#UPGRADERSNOTE" ->Note to Upgraders</A -></DT -></DL -></DD -><DT ->4. <A -HREF="quickstart.html" ->Quickstart to Using Privoxy</A -></DT -><DD -><DL -><DT ->4.1. <A -HREF="quickstart.html#QUICKSTART-AD-BLOCKING" ->Quickstart to Ad Blocking</A -></DT -></DL -></DD -><DT ->5. <A -HREF="startup.html" ->Starting Privoxy</A -></DT -><DD -><DL -><DT ->5.1. <A -HREF="startup.html#START-REDHAT" ->Red Hat and Fedora</A -></DT -><DT ->5.2. <A -HREF="startup.html#START-DEBIAN" ->Debian</A -></DT -><DT ->5.3. <A -HREF="startup.html#START-WINDOWS" ->Windows</A -></DT -><DT ->5.4. <A -HREF="startup.html#START-UNICES" ->Solaris, NetBSD, FreeBSD, HP-UX and others</A -></DT -><DT ->5.5. <A -HREF="startup.html#START-OS2" ->OS/2</A -></DT -><DT ->5.6. <A -HREF="startup.html#START-MACOSX" ->Mac OS X</A -></DT -><DT ->5.7. <A -HREF="startup.html#START-AMIGAOS" ->AmigaOS</A -></DT -><DT ->5.8. <A -HREF="startup.html#START-GENTOO" ->Gentoo</A -></DT -><DT ->5.9. <A -HREF="startup.html#CMDOPTIONS" ->Command Line Options</A -></DT -></DL -></DD -><DT ->6. <A -HREF="configuration.html" ->Privoxy Configuration</A -></DT -><DD -><DL -><DT ->6.1. <A -HREF="configuration.html#AEN776" ->Controlling Privoxy with Your Web Browser</A -></DT -><DT ->6.2. <A -HREF="configuration.html#CONFOVERVIEW" ->Configuration Files Overview</A -></DT -></DL -></DD -><DT ->7. <A -HREF="config.html" ->The Main Configuration File</A -></DT -><DD -><DL -><DT ->7.1. <A -HREF="config.html#LOCAL-SET-UP" ->Local Set-up Documentation</A -></DT -><DD -><DL -><DT ->7.1.1. <A -HREF="config.html#USER-MANUAL" ->user-manual</A -></DT -><DT ->7.1.2. <A -HREF="config.html#TRUST-INFO-URL" ->trust-info-url</A -></DT -><DT ->7.1.3. <A -HREF="config.html#ADMIN-ADDRESS" ->admin-address</A -></DT -><DT ->7.1.4. <A -HREF="config.html#PROXY-INFO-URL" ->proxy-info-url</A -></DT -></DL -></DD -><DT ->7.2. <A -HREF="config.html#CONF-LOG-LOC" ->Configuration and Log File Locations</A -></DT -><DD -><DL -><DT ->7.2.1. <A -HREF="config.html#CONFDIR" ->confdir</A -></DT -><DT ->7.2.2. <A -HREF="config.html#TEMPLDIR" ->templdir</A -></DT -><DT ->7.2.3. <A -HREF="config.html#LOGDIR" ->logdir</A -></DT -><DT ->7.2.4. <A -HREF="config.html#ACTIONSFILE" ->actionsfile</A -></DT -><DT ->7.2.5. <A -HREF="config.html#FILTERFILE" ->filterfile</A -></DT -><DT ->7.2.6. <A -HREF="config.html#LOGFILE" ->logfile</A -></DT -><DT ->7.2.7. <A -HREF="config.html#TRUSTFILE" ->trustfile</A -></DT -></DL -></DD -><DT ->7.3. <A -HREF="config.html#DEBUGGING" ->Debugging</A -></DT -><DD -><DL -><DT ->7.3.1. <A -HREF="config.html#DEBUG" ->debug</A -></DT -><DT ->7.3.2. <A -HREF="config.html#SINGLE-THREADED" ->single-threaded</A -></DT -><DT ->7.3.3. <A -HREF="config.html#HOSTNAME" ->hostname</A -></DT -></DL -></DD -><DT ->7.4. <A -HREF="config.html#ACCESS-CONTROL" ->Access Control and Security</A -></DT -><DD -><DL -><DT ->7.4.1. <A -HREF="config.html#LISTEN-ADDRESS" ->listen-address</A -></DT -><DT ->7.4.2. <A -HREF="config.html#TOGGLE" ->toggle</A -></DT -><DT ->7.4.3. <A -HREF="config.html#ENABLE-REMOTE-TOGGLE" ->enable-remote-toggle</A -></DT -><DT ->7.4.4. <A -HREF="config.html#ENABLE-REMOTE-HTTP-TOGGLE" ->enable-remote-http-toggle</A -></DT -><DT ->7.4.5. <A -HREF="config.html#ENABLE-EDIT-ACTIONS" ->enable-edit-actions</A -></DT -><DT ->7.4.6. <A -HREF="config.html#ENFORCE-BLOCKS" ->enforce-blocks</A -></DT -><DT ->7.4.7. <A -HREF="config.html#ACLS" ->ACLs: permit-access and deny-access</A -></DT -><DT ->7.4.8. <A -HREF="config.html#BUFFER-LIMIT" ->buffer-limit</A -></DT -></DL -></DD -><DT ->7.5. <A -HREF="config.html#FORWARDING" ->Forwarding</A -></DT -><DD -><DL -><DT ->7.5.1. <A -HREF="config.html#FORWARD" ->forward</A -></DT -><DT ->7.5.2. <A -HREF="config.html#SOCKS" ->forward-socks4, forward-socks4a and forward-socks5</A -></DT -><DT ->7.5.3. <A -HREF="config.html#ADVANCED-FORWARDING-EXAMPLES" ->Advanced Forwarding Examples</A -></DT -><DT ->7.5.4. <A -HREF="config.html#FORWARDED-CONNECT-RETRIES" ->forwarded-connect-retries</A -></DT -><DT ->7.5.5. <A -HREF="config.html#ACCEPT-INTERCEPTED-REQUESTS" ->accept-intercepted-requests</A -></DT -><DT ->7.5.6. <A -HREF="config.html#ALLOW-CGI-REQUEST-CRUNCHING" ->allow-cgi-request-crunching</A -></DT -><DT ->7.5.7. <A -HREF="config.html#SPLIT-LARGE-FORMS" ->split-large-forms</A -></DT -><DT ->7.5.8. <A -HREF="config.html#KEEP-ALIVE-TIMEOUT" ->keep-alive-timeout</A -></DT -><DT ->7.5.9. <A -HREF="config.html#SOCKET-TIMEOUT" ->socket-timeout</A -></DT -></DL -></DD -><DT ->7.6. <A -HREF="config.html#WINDOWS-GUI" ->Windows GUI Options</A -></DT -></DL -></DD -><DT ->8. <A -HREF="actions-file.html" ->Actions Files</A -></DT -><DD -><DL -><DT ->8.1. <A -HREF="actions-file.html#AEN2288" ->Finding the Right Mix</A -></DT -><DT ->8.2. <A -HREF="actions-file.html#AEN2295" ->How to Edit</A -></DT -><DT ->8.3. <A -HREF="actions-file.html#ACTIONS-APPLY" ->How Actions are Applied to Requests</A -></DT -><DT ->8.4. <A -HREF="actions-file.html#AF-PATTERNS" ->Patterns</A -></DT -><DD -><DL -><DT ->8.4.1. <A -HREF="actions-file.html#AEN2386" ->The Domain Pattern</A -></DT -><DT ->8.4.2. <A -HREF="actions-file.html#AEN2462" ->The Path Pattern</A -></DT -><DT ->8.4.3. <A -HREF="actions-file.html#TAG-PATTERN" ->The Tag Pattern</A -></DT -></DL -></DD -><DT ->8.5. <A -HREF="actions-file.html#ACTIONS" ->Actions</A -></DT -><DD -><DL -><DT ->8.5.1. <A -HREF="actions-file.html#ADD-HEADER" ->add-header</A -></DT -><DT ->8.5.2. <A -HREF="actions-file.html#BLOCK" ->block</A -></DT -><DT ->8.5.3. <A -HREF="actions-file.html#CHANGE-X-FORWARDED-FOR" ->change-x-forwarded-for</A -></DT -><DT ->8.5.4. <A -HREF="actions-file.html#CLIENT-HEADER-FILTER" ->client-header-filter</A -></DT -><DT ->8.5.5. <A -HREF="actions-file.html#CLIENT-HEADER-TAGGER" ->client-header-tagger</A -></DT -><DT ->8.5.6. <A -HREF="actions-file.html#CONTENT-TYPE-OVERWRITE" ->content-type-overwrite</A -></DT -><DT ->8.5.7. <A -HREF="actions-file.html#CRUNCH-CLIENT-HEADER" ->crunch-client-header</A -></DT -><DT ->8.5.8. <A -HREF="actions-file.html#CRUNCH-IF-NONE-MATCH" ->crunch-if-none-match</A -></DT -><DT ->8.5.9. <A -HREF="actions-file.html#CRUNCH-INCOMING-COOKIES" ->crunch-incoming-cookies</A -></DT -><DT ->8.5.10. <A -HREF="actions-file.html#CRUNCH-SERVER-HEADER" ->crunch-server-header</A -></DT -><DT ->8.5.11. <A -HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES" ->crunch-outgoing-cookies</A -></DT -><DT ->8.5.12. <A -HREF="actions-file.html#DEANIMATE-GIFS" ->deanimate-gifs</A -></DT -><DT ->8.5.13. <A -HREF="actions-file.html#DOWNGRADE-HTTP-VERSION" ->downgrade-http-version</A -></DT -><DT ->8.5.14. <A -HREF="actions-file.html#FAST-REDIRECTS" ->fast-redirects</A -></DT -><DT ->8.5.15. <A -HREF="actions-file.html#FILTER" ->filter</A -></DT -><DT ->8.5.16. <A -HREF="actions-file.html#FORCE-TEXT-MODE" ->force-text-mode</A -></DT -><DT ->8.5.17. <A -HREF="actions-file.html#FORWARD-OVERRIDE" ->forward-override</A -></DT -><DT ->8.5.18. <A -HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT" ->handle-as-empty-document</A -></DT -><DT ->8.5.19. <A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></DT -><DT ->8.5.20. <A -HREF="actions-file.html#HIDE-ACCEPT-LANGUAGE" ->hide-accept-language</A -></DT -><DT ->8.5.21. <A -HREF="actions-file.html#HIDE-CONTENT-DISPOSITION" ->hide-content-disposition</A -></DT -><DT ->8.5.22. <A -HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE" ->hide-if-modified-since</A -></DT -><DT ->8.5.23. <A -HREF="actions-file.html#HIDE-FROM-HEADER" ->hide-from-header</A -></DT -><DT ->8.5.24. <A -HREF="actions-file.html#HIDE-REFERRER" ->hide-referrer</A -></DT -><DT ->8.5.25. <A -HREF="actions-file.html#HIDE-USER-AGENT" ->hide-user-agent</A -></DT -><DT ->8.5.26. <A -HREF="actions-file.html#LIMIT-CONNECT" ->limit-connect</A -></DT -><DT ->8.5.27. <A -HREF="actions-file.html#PREVENT-COMPRESSION" ->prevent-compression</A -></DT -><DT ->8.5.28. <A -HREF="actions-file.html#OVERWRITE-LAST-MODIFIED" ->overwrite-last-modified</A -></DT -><DT ->8.5.29. <A -HREF="actions-file.html#REDIRECT" ->redirect</A -></DT -><DT ->8.5.30. <A -HREF="actions-file.html#SERVER-HEADER-FILTER" ->server-header-filter</A -></DT -><DT ->8.5.31. <A -HREF="actions-file.html#SERVER-HEADER-TAGGER" ->server-header-tagger</A -></DT -><DT ->8.5.32. <A -HREF="actions-file.html#SESSION-COOKIES-ONLY" ->session-cookies-only</A -></DT -><DT ->8.5.33. <A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A -></DT -><DT ->8.5.34. <A -HREF="actions-file.html#AEN4093" ->Summary</A -></DT -></DL -></DD -><DT ->8.6. <A -HREF="actions-file.html#ALIASES" ->Aliases</A -></DT -><DT ->8.7. <A -HREF="actions-file.html#ACT-EXAMPLES" ->Actions Files Tutorial</A -></DT -><DD -><DL -><DT ->8.7.1. <A -HREF="actions-file.html#AEN4157" ->match-all.action</A -></DT -><DT ->8.7.2. <A -HREF="actions-file.html#AEN4179" ->default.action</A -></DT -><DT ->8.7.3. <A -HREF="actions-file.html#AEN4292" ->user.action</A -></DT -></DL -></DD -></DL -></DD -><DT ->9. <A -HREF="filter-file.html" ->Filter Files</A -></DT -><DD -><DL -><DT ->9.1. <A -HREF="filter-file.html#AEN4447" ->Filter File Tutorial</A -></DT -><DT ->9.2. <A -HREF="filter-file.html#PREDEFINED-FILTERS" ->The Pre-defined Filters</A -></DT -></DL -></DD -><DT ->10. <A -HREF="templates.html" ->Privoxy's Template Files</A -></DT -><DT ->11. <A -HREF="contact.html" ->Contacting the Developers, Bug Reporting and Feature -Requests</A -></DT -><DD -><DL -><DT ->11.1. <A -HREF="contact.html#CONTACT-SUPPORT" ->Get Support</A -></DT -><DT ->11.2. <A -HREF="contact.html#REPORTING" ->Reporting Problems</A -></DT -><DD -><DL -><DT ->11.2.1. <A -HREF="contact.html#CONTACT-ADS" ->Reporting Ads or Other Configuration Problems</A -></DT -><DT ->11.2.2. <A -HREF="contact.html#CONTACT-BUGS" ->Reporting Bugs</A -></DT -></DL -></DD -><DT ->11.3. <A -HREF="contact.html#CONTACT-FEATURE" ->Request New Features</A -></DT -><DT ->11.4. <A -HREF="contact.html#CONTACT-OTHER" ->Other</A -></DT -></DL -></DD -><DT ->12. <A -HREF="copyright.html" ->Privoxy Copyright, License and History</A -></DT -><DD -><DL -><DT ->12.1. <A -HREF="copyright.html#AEN4921" ->License</A -></DT -><DT ->12.2. <A -HREF="copyright.html#HISTORY" ->History</A -></DT -><DT ->12.3. <A -HREF="copyright.html#AUTHORS" ->Authors</A -></DT -></DL -></DD -><DT ->13. <A -HREF="seealso.html" ->See Also</A -></DT -><DT ->14. <A -HREF="appendix.html" ->Appendix</A -></DT -><DD -><DL -><DT ->14.1. <A -HREF="appendix.html#REGEX" ->Regular Expressions</A -></DT -><DT ->14.2. <A -HREF="appendix.html#AEN5174" ->Privoxy's Internal Pages</A -></DT -><DD -><DL -><DT ->14.2.1. <A -HREF="appendix.html#BOOKMARKLETS" ->Bookmarklets</A -></DT -></DL -></DD -><DT ->14.3. <A -HREF="appendix.html#CHAIN" ->Chain of Events</A -></DT -><DT ->14.4. <A -HREF="appendix.html#ACTIONSANAT" ->Troubleshooting: Anatomy of an Action</A -></DT -></DL -></DD -></DL -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -> </TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="introduction.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -> </TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Introduction</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/installation.html b/external/privoxy/doc/webserver/user-manual/installation.html deleted file mode 100644 index f5fefc2..0000000 --- a/external/privoxy/doc/webserver/user-manual/installation.html +++ /dev/null @@ -1,1082 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Installation</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Introduction" -HREF="introduction.html"><LINK -REL="NEXT" -TITLE="What's New in this Release" -HREF="whatsnew.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="introduction.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="whatsnew.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="INSTALLATION" ->2. Installation</A -></H1 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is available both in convenient pre-compiled - packages for a wide range of operating systems, and as raw source code. - For most users, we recommend using the packages, which can be downloaded from our - <A -HREF="http://sourceforge.net/projects/ijbswa/" -TARGET="_top" ->Privoxy Project - Page</A ->.</P -><P -> Note: - On some platforms, the installer may remove previously installed versions, if - found. (See below for your platform). In any case <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->be sure to backup - your old configuration if it is valuable to you.</I -></SPAN -> See the <A -HREF="whatsnew.html#UPGRADERSNOTE" ->note to upgraders</A -> section below.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="INSTALLATION-PACKAGES" ->2.1. Binary Packages</A -></H2 -><P ->How to install the binary packages depends on your operating system:</P -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-PACK-RPM" ->2.1.1. Red Hat and Fedora RPMs</A -></H3 -><P -> RPMs can be installed with <TT -CLASS="LITERAL" ->rpm -Uvh privoxy-3.0.12-1.rpm</TT ->, - and will use <TT -CLASS="FILENAME" ->/etc/privoxy</TT -> for the location - of configuration files.</P -><P -> Note that on Red Hat, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->not</I -></SPAN -> be automatically started on system boot. You will - need to enable that using <B -CLASS="COMMAND" ->chkconfig</B ->, - <B -CLASS="COMMAND" ->ntsysv</B ->, or similar methods. </P -><P -> If you have problems with failed dependencies, try rebuilding the SRC RPM: - <TT -CLASS="LITERAL" ->rpm --rebuild privoxy-3.0.12-1.src.rpm</TT ->. This - will use your locally installed libraries and RPM version. </P -><P -> Also note that if you have a <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> RPM installed - on your system, you need to remove it first, because the packages conflict. - Otherwise, RPM will try to remove <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> - automatically if found, before installing <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-DEB" ->2.1.2. Debian and Ubuntu</A -></H3 -><P -> DEBs can be installed with <TT -CLASS="LITERAL" ->apt-get install privoxy</TT ->, - and will use <TT -CLASS="FILENAME" ->/etc/privoxy</TT -> for the location of - configuration files.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-PACK-WIN" ->2.1.3. Windows</A -></H3 -><P -> Just double-click the installer, which will guide you through - the installation process. You will find the configuration files - in the same directory as you installed <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> in. </P -><P -> Version 3.0.5 beta introduced full <SPAN -CLASS="APPLICATION" ->Windows</SPAN -> service - functionality. On Windows only, the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - program has two new command line arguments to install and uninstall - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> as a <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->service</I -></SPAN ->.</P -><P -></P -><DIV -CLASS="VARIABLELIST" -><DL -><DT ->Arguments:</DT -><DD -><P -> <TT -CLASS="REPLACEABLE" -><I ->--install</I -></TT ->[:<TT -CLASS="REPLACEABLE" -><I ->service_name</I -></TT ->] - </P -><P -> <TT -CLASS="REPLACEABLE" -><I ->--uninstall</I -></TT ->[:<TT -CLASS="REPLACEABLE" -><I ->service_name</I -></TT ->] - </P -></DD -></DL -></DIV -><P -> After invoking <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> with - <B -CLASS="COMMAND" ->--install</B ->, you will need to bring up the - <SPAN -CLASS="APPLICATION" ->Windows</SPAN -> service console to assign the user you - want <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to run under, and whether or not you - want it to run whenever the system starts. You can start the - <SPAN -CLASS="APPLICATION" ->Windows</SPAN -> services console with the following - command: <B -CLASS="COMMAND" ->services.msc</B ->. If you do not take the manual step - of modifying <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> service settings, it will - not start. Note too that you will need to give Privoxy a user account that - actually exists, or it will not be permitted to - write to its log and configuration files.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-PACK-BINTGZ" ->2.1.4. Solaris</A -></H3 -><P -> Create a new directory, <TT -CLASS="LITERAL" ->cd</TT -> to it, then unzip and - untar the archive. For the most part, you'll have to figure out where - things go. </P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-OS2" ->2.1.5. OS/2</A -></H3 -><P -> First, make sure that no previous installations of - <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> and / or - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> are left on your - system. Check that no <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> - or <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> objects are in - your startup folder.</P -><P -> Then, just double-click the WarpIN self-installing archive, which will - guide you through the installation process. A shadow of the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> executable will be placed in your - startup folder so it will start automatically whenever OS/2 starts.</P -><P -> The directory you choose to install <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - into will contain all of the configuration files.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-MAC" ->2.1.6. Mac OS X</A -></H3 -><P -> Unzip the downloaded file (you can either double-click on the zip file - icon from the Finder, or from the desktop if you downloaded it there). - Then, double-click on the package installer icon and follow the - installation process.</P -><P -> The privoxy service will automatically start after a successful - installation (in addition to every time your computer starts up). To - prevent the privoxy service from automatically starting when your - computer starts up, remove or rename the folder named - <TT -CLASS="LITERAL" ->/Library/StartupItems/Privoxy</TT ->. </P -><P -> To manually start or stop the privoxy service, use the Privoxy Utility - for Mac OS X. This application controls the privoxy service (e.g. - starting and stopping the service as well as uninstalling the software).</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-AMIGA" ->2.1.7. AmigaOS</A -></H3 -><P -> Copy and then unpack the <TT -CLASS="FILENAME" ->lha</TT -> archive to a suitable location. - All necessary files will be installed into <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - directory, including all configuration and log files. To uninstall, just - remove this directory.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATION-TBZ" ->2.1.8. FreeBSD</A -></H3 -><P -> Privoxy is part of FreeBSD's Ports Collection, you can build and install - it with <TT -CLASS="LITERAL" ->cd /usr/ports/www/privoxy; make install clean</TT ->.</P -><P -> If you don't use the ports, you can fetch and install - the package with <TT -CLASS="LITERAL" ->pkg_add -r privoxy</TT ->.</P -><P -> The port skeleton and the package can also be downloaded from the - <A -HREF="https://sourceforge.net/project/showfiles.php?group_id=11118" -TARGET="_top" ->File Release - Page</A ->, but there's no reason to use them unless you're interested in the - beta releases which are only available there.</P -></DIV -><DIV -CLASS="SECT3" -><H3 -CLASS="SECT3" -><A -NAME="INSTALLATTION-GENTOO" ->2.1.9. Gentoo</A -></H3 -><P -> Gentoo source packages (Ebuilds) for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> are - contained in the Gentoo Portage Tree (they are not on the download page, - but there is a Gentoo section, where you can see when a new - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Version is added to the Portage Tree).</P -><P -> Before installing <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> under Gentoo just do - first <TT -CLASS="LITERAL" ->emerge --sync</TT -> to get the latest changes from the - Portage tree. With <TT -CLASS="LITERAL" ->emerge privoxy</TT -> you install the latest - version.</P -><P -> Configuration files are in <TT -CLASS="FILENAME" ->/etc/privoxy</TT ->, the - documentation is in <TT -CLASS="FILENAME" ->/usr/share/doc/privoxy-3.0.12</TT -> - and the Log directory is in <TT -CLASS="FILENAME" ->/var/log/privoxy</TT ->.</P -></DIV -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="INSTALLATION-SOURCE" ->2.2. Building from Source</A -></H2 -><P -> The most convenient way to obtain the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> sources - is to download the source tarball from our - <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118&package_id=…" -TARGET="_top" ->project download - page</A ->.</P -><P -> If you like to live on the bleeding edge and are not afraid of using - possibly unstable development versions, you can check out the up-to-the-minute - version directly from <A -HREF="http://sourceforge.net/cvs/?group_id=11118" -TARGET="_top" ->the - CVS repository</A ->. </P -><P -> To build <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> from source, - <A -HREF="http://www.gnu.org/software/autoconf/autoconf.html" -TARGET="_top" ->autoconf</A ->, - <A -HREF="http://www.gnu.org/software/make/make.html" -TARGET="_top" ->GNU make - (gmake)</A ->, and, of course, a C compiler like <A -HREF="http://www.gnu.org/software/gcc/gcc.html" -TARGET="_top" ->gcc</A -> are required.</P -><P -> When building from a source tarball, - first unpack the source: </P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> tar xzvf privoxy-3.0.12-stable-src.tar.gz - cd privoxy-3.0.12-stable</PRE -></TD -></TR -></TABLE -></P -><P -> For retrieving the current CVS sources, you'll need a CVS client installed. - Note that sources from CVS are typically development quality, and may not be - stable, or well tested. To download CVS source, check the Sourceforge - documentation, which might give commands like:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co current - cd current</PRE -></TD -></TR -></TABLE -></P -><P -> This will create a directory named <TT -CLASS="FILENAME" ->current/</TT ->, which will - contain the source tree.</P -><P -> You can also check out any <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - <SPAN -CLASS="QUOTE" ->"branch"</SPAN ->, just exchange the <SPAN -CLASS="APPLICATION" ->current</SPAN -> - name with the wanted branch name (Example: v_3_0_branch for the 3.0 cvs - tree).</P -><P -> It is also strongly recommended to not run <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - as root. You should configure/install/run <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> as - an unprivileged user, preferably by creating a <SPAN -CLASS="QUOTE" ->"privoxy"</SPAN -> user - and group just for this purpose. See your local documentation for the correct - command line to do add new users and groups (something like - <B -CLASS="COMMAND" ->adduser</B ->, but the command syntax may vary from platform - to platform). </P -><P -> <TT -CLASS="FILENAME" ->/etc/passwd</TT -> might then look like:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell</PRE -></TD -></TR -></TABLE -></P -><P -> And then <TT -CLASS="FILENAME" ->/etc/group</TT ->, like:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> privoxy:*:7777:</PRE -></TD -></TR -></TABLE -></P -><P -> Some binary packages may do this for you.</P -><P -> Then, to build from either unpacked tarball or CVS source:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> autoheader - autoconf - ./configure # (--help to see options) - make # (the make from GNU, sometimes called gmake) - su # Possibly required - make -n install # (to see where all the files will go) - make -s install # (to really install, -s to silence output)</PRE -></TD -></TR -></TABLE -></P -><P -> Using GNU <B -CLASS="COMMAND" ->make</B ->, you can have the first four steps - automatically done for you by just typing:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> make</PRE -></TD -></TR -></TABLE -></P -><P -> in the freshly downloaded or unpacked source directory.</P -><P -> To build an executable with security enhanced features so that - users cannot easily bypass the proxy (e.g. <SPAN -CLASS="QUOTE" ->"Go There Anyway"</SPAN ->), or - alter their own configurations, <B -CLASS="COMMAND" ->configure</B -> like this:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> ./configure --disable-toggle --disable-editor --disable-force</PRE -></TD -></TR -></TABLE -></P -><P ->Then build as above. In Privoxy 3.0.7 and later, all of these options -can also be disabled through the configuration file.</P -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->WARNING:</I -></SPAN -> If installing as root, the install will fail - unless a non-root user or group is specified, or a <TT -CLASS="LITERAL" ->privoxy</TT -> - user and group already exist on the system. If a non-root user is specified, - and no group, then the installation will try to also use a group of the same name - as <SPAN -CLASS="QUOTE" ->"user"</SPAN ->. If a group is specified (and no user), then the - support files will be installed as writable by that group, and owned by the - user running the installation.</P -><P -> <B -CLASS="COMMAND" ->configure</B -> accepts <TT -CLASS="LITERAL" ->--with-user</TT -> and - <TT -CLASS="LITERAL" ->--with-group</TT -> options for setting user and group ownership - of the configuration files (which need to be writable by the daemon). The - specified <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->user must already exist</I -></SPAN ->. When starting - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, it must be run as this same user to - insure write access to configuration and log files!</P -><P -> Alternately, you can specify <TT -CLASS="LITERAL" ->user</TT -> and <TT -CLASS="LITERAL" ->group</TT -> - on the <B -CLASS="COMMAND" ->make</B -> command line, but be sure both already exist:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> make -s install USER=privoxy GROUP=privoxy</PRE -></TD -></TR -></TABLE -></P -><P -> The default installation path for <B -CLASS="COMMAND" ->make install</B -> is - <TT -CLASS="FILENAME" ->/usr/local</TT ->. This may of course be customized with - the various <B -CLASS="COMMAND" ->./configure</B -> path options. If you are doing - an install to anywhere besides <TT -CLASS="FILENAME" ->/usr/local</TT ->, be - sure to set the appropriate paths with the correct configure options - (<B -CLASS="COMMAND" ->./configure --help</B ->). Non-privileged users must of course - have write access permissions to wherever the target installation is going.</P -><P -> If you do install to <TT -CLASS="FILENAME" ->/usr/local</TT ->, the install will use - <TT -CLASS="LITERAL" ->sysconfdir=$prefix/etc/privoxy</TT -> by default. All other - destinations, and the direct usage of <TT -CLASS="LITERAL" ->--sysconfdir</TT -> flag - behave like normal, i.e. will not add the extra <TT -CLASS="FILENAME" ->privoxy</TT -> - directory. This is for a safer install, as there may already exist another - program that uses a file with the <SPAN -CLASS="QUOTE" ->"config"</SPAN -> name, and thus makes - <TT -CLASS="FILENAME" ->/usr/local/etc</TT -> cleaner.</P -><P -> If installing to <TT -CLASS="FILENAME" ->/usr/local</TT ->, the documentation will go - by default to <TT -CLASS="FILENAME" ->$prefix/share/doc</TT ->. But if this directory - doesn't exist, it will then try <TT -CLASS="FILENAME" ->$prefix/doc</TT -> and install - there before creating a new <TT -CLASS="FILENAME" ->$prefix/share/doc</TT -> just for - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->.</P -><P -> Again, if the installs goes to <TT -CLASS="FILENAME" ->/usr/local</TT ->, the - <TT -CLASS="LITERAL" ->localstatedir</TT -> (ie: <TT -CLASS="FILENAME" ->var/</TT ->) will default - to <TT -CLASS="FILENAME" ->/var</TT -> instead of <TT -CLASS="LITERAL" ->$prefix/var</TT -> so - the logs will go to <TT -CLASS="FILENAME" ->/var/log/privoxy/</TT ->, and the pid file - will be created in <TT -CLASS="FILENAME" ->/var/run/privoxy.pid</TT ->. </P -><P -> <B -CLASS="COMMAND" ->make install</B -> will attempt to set the correct values - in <TT -CLASS="FILENAME" ->config</TT -> (main configuration file). You should - check this to make sure all values are correct. If appropriate, - an init script will be installed, but it is up to the user to determine - how and where to start <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. The init - script should be checked for correct paths and values, if anything other than - a default install is done.</P -><P -> If install finds previous versions of local configuration files, most of - these will not be overwritten, and the new ones will be installed with a - <SPAN -CLASS="QUOTE" ->"new"</SPAN -> extension. default.action and default.filter - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->will be overwritten</I -></SPAN ->. You will then need - to manually update the other installed configuration files as needed. The - default template files <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->will</I -></SPAN -> be overwritten. If you have - customized, local templates, these should be stored safely in a separate - directory and defined in <TT -CLASS="FILENAME" ->config</TT -> by the - <SPAN -CLASS="QUOTE" ->"templdir"</SPAN -> directive. It is of course wise to always back-up any - important configuration files <SPAN -CLASS="QUOTE" ->"just in case"</SPAN ->. If a previous - version of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is already running, you will - have to restart it manually.</P -><P -> For more detailed instructions on how to build Redhat RPMs, - Windows self-extracting installers, building on platforms with - special requirements etc, please consult the <A -HREF="http://www.privoxy.org/developer-manual/newrelease.html" -TARGET="_top" ->developer manual</A ->.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="INSTALLATION-KEEPUPDATED" ->2.3. Keeping your Installation Up-to-Date</A -></H2 -><P -> As user feedback comes in and development continues, we will make updated versions - of both the main <A -HREF="actions-file.html" ->actions file</A -> (as a <A -HREF="http://sourceforge.net/project/showfiles.php?group_id=11118&release_id=…" -TARGET="_top" ->separate - package</A ->) and the software itself (including the actions file) available for - download.</P -><P -> If you wish to receive an email notification whenever we release updates of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> or the actions file, <A -HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/" -TARGET="_top" ->subscribe - to our announce mailing list</A ->, ijbswa-announce(a)lists.sourceforge.net.</P -><P -> In order not to lose your personal changes and adjustments when updating - to the latest <TT -CLASS="LITERAL" ->default.action</TT -> file we <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->strongly - recommend</I -></SPAN -> that you use <TT -CLASS="LITERAL" ->user.action</TT -> and - <TT -CLASS="LITERAL" ->user.filter</TT -> for your local - customizations of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. See the <A -HREF="actions-file.html" ->Chapter on actions files</A -> for details.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="introduction.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="whatsnew.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Introduction</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->What's New in this Release</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/introduction.html b/external/privoxy/doc/webserver/user-manual/introduction.html deleted file mode 100644 index aad9cc0..0000000 --- a/external/privoxy/doc/webserver/user-manual/introduction.html +++ /dev/null @@ -1,292 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Introduction</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="NEXT" -TITLE="Installation" -HREF="installation.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="index.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="installation.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="INTRODUCTION" ->1. Introduction</A -></H1 -><P -> This documentation is included with the current stable version of - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, v.3.0.12.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="FEATURES" ->1.1. Features</A -></H2 -><P -> In addition to the core - features of ad blocking and - <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookie</A -> management, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> provides many supplemental - features, - that give the end-user more control, more privacy and more freedom:</P -><P -> <P -></P -><UL -><LI -><P -> Can keep outgoing connections alive and reuse them later on. - </P -></LI -><LI -><P -> Supports tagging which allows to change the behaviour - based on client and server headers. - </P -></LI -><LI -><P -> Can be run as an "intercepting" proxy, which obviates the need to - configure browsers individually. - </P -></LI -><LI -><P -> Sophisticated actions and filters for manipulating both server and client - headers. - </P -></LI -><LI -><P -> Can be chained with other proxies. - </P -></LI -><LI -><P -> Integrated browser based configuration and control utility at <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> - (shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->). Browser-based - tracing of rule and filter effects. Remote toggling. - </P -></LI -><LI -><P -> Web page filtering (text replacements, removes banners based on size, - invisible <SPAN -CLASS="QUOTE" ->"web-bugs"</SPAN ->, JavaScript and HTML annoyances, - pop-up windows, etc.) - </P -></LI -><LI -><P -> Modularized configuration that allows for standard settings and - user settings to reside in separate files, so that installing updated - actions files won't overwrite individual user settings. - </P -></LI -><LI -><P -> Support for Perl Compatible Regular Expressions in the configuration files, and - a more sophisticated and flexible configuration syntax. - </P -></LI -><LI -><P -> Improved cookie management features (e.g. session based cookies). - </P -></LI -><LI -><P -> GIF de-animation. - </P -></LI -><LI -><P -> Bypass many click-tracking scripts (avoids script redirection). - </P -></LI -><LI -><P -> Multi-threaded (POSIX and native threads). - </P -></LI -><LI -><P -> User-customizable HTML templates for most proxy-generated pages (e.g. "blocked" page). - </P -></LI -><LI -><P -> Auto-detection and re-reading of config file changes. - </P -></LI -><LI -><P -> Improved signal handling, and a true daemon mode (Unix). - </P -></LI -><LI -><P -> Every feature now controllable on a per-site or per-location basis, configuration - more powerful and versatile over-all. - </P -></LI -><LI -><P -> Many smaller new features added, limitations and bugs removed. - </P -></LI -></UL -></P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="installation.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Privoxy 3.0.12 User Manual</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Installation</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/proxy2.jpg b/external/privoxy/doc/webserver/user-manual/proxy2.jpg deleted file mode 100644 index e6c50dc..0000000 Binary files a/external/privoxy/doc/webserver/user-manual/proxy2.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/user-manual/proxy_setup.jpg b/external/privoxy/doc/webserver/user-manual/proxy_setup.jpg deleted file mode 100644 index 9e80f97..0000000 Binary files a/external/privoxy/doc/webserver/user-manual/proxy_setup.jpg and /dev/null differ diff --git a/external/privoxy/doc/webserver/user-manual/quickstart.html b/external/privoxy/doc/webserver/user-manual/quickstart.html deleted file mode 100644 index 0393689..0000000 --- a/external/privoxy/doc/webserver/user-manual/quickstart.html +++ /dev/null @@ -1,943 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Quickstart to Using Privoxy</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="What's New in this Release" -HREF="whatsnew.html"><LINK -REL="NEXT" -TITLE="Starting Privoxy" -HREF="startup.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="whatsnew.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="startup.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="QUICKSTART" ->4. Quickstart to Using Privoxy</A -></H1 -><P -> <P -></P -><UL -><LI -><P -> Install <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. See the <A -HREF="installation.html" ->Installation Section</A -> below for platform specific - information. - </P -></LI -><LI -><P -> Advanced users and those who want to offer <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - service to more than just their local machine should check the <A -HREF="config.html" ->main config file</A ->, especially the <A -HREF="config.html#ACCESS-CONTROL" ->security-relevant</A -> options. These are - off by default. - </P -></LI -><LI -><P -> Start <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->, if the installation program has - not done this already (may vary according to platform). See the section - <A -HREF="startup.html" ->Starting <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -></A ->. - </P -></LI -><LI -><P -> Set your browser to use <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> as HTTP and - HTTPS (SSL) <A -HREF="http://en.wikipedia.org/wiki/Proxy_server" -TARGET="_top" ->proxy</A -> - by setting the proxy configuration for address of - <TT -CLASS="LITERAL" ->127.0.0.1</TT -> and port <TT -CLASS="LITERAL" ->8118</TT ->. - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->DO NOT</I -></SPAN -> activate proxying for <TT -CLASS="LITERAL" ->FTP</TT -> or - any protocols besides HTTP and HTTPS (SSL) unless you intend to prevent your - browser from using these protocols. - </P -></LI -><LI -><P -> Flush your browser's disk and memory caches, to remove any cached ad images. - If using <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to manage - <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookies</A ->, - you should remove any currently stored cookies too. - </P -></LI -><LI -><P -> A default installation should provide a reasonable starting point for - most. There will undoubtedly be occasions where you will want to adjust the - configuration, but that can be dealt with as the need arises. Little - to no initial configuration is required in most cases, you may want - to enable the - <A -HREF="config.html#ENABLE-EDIT-ACTIONS" -TARGET="_top" ->web-based action editor</A -> though. - Be sure to read the warnings first. - </P -><P -> See the <A -HREF="configuration.html" ->Configuration section</A -> for more - configuration options, and how to customize your installation. - You might also want to look at the <A -HREF="quickstart.html#QUICKSTART-AD-BLOCKING" ->next section</A -> for a quick - introduction to how <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> blocks ads and - banners.</P -></LI -><LI -><P -> If you experience ads that slip through, innocent images that are - blocked, or otherwise feel the need to fine-tune - <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> behavior, take a look at the <A -HREF="actions-file.html" ->actions files</A ->. As a quick start, you might - find the <A -HREF="actions-file.html#ACT-EXAMPLES" ->richly commented examples</A -> - helpful. You can also view and edit the actions files through the <A -HREF="http://config.privoxy.org" -TARGET="_top" ->web-based user interface</A ->. The - Appendix <SPAN -CLASS="QUOTE" ->"<A -HREF="appendix.html#ACTIONSANAT" ->Troubleshooting: Anatomy of an - Action</A ->"</SPAN -> has hints on how to understand and debug actions that - <SPAN -CLASS="QUOTE" ->"misbehave"</SPAN ->. - </P -></LI -><LI -><P -> Please see the section <A -HREF="contact.html" ->Contacting the - Developers</A -> on how to report bugs, problems with websites or to get - help. - </P -></LI -><LI -><P -> Now enjoy surfing with enhanced control, comfort and privacy! - </P -></LI -></UL -></P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="QUICKSTART-AD-BLOCKING" ->4.1. Quickstart to Ad Blocking</A -></H2 -><P -> Ad blocking is but one of <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - array of features. Many of these features are for the technically minded advanced - user. But, ad and banner blocking is surely common ground for everybody.</P -><P -> - This section will provide a quick summary of ad blocking so - you can get up to speed quickly without having to read the more extensive - information provided below, though this is highly recommended.</P -><P -> First a bit of a warning ... blocking ads is much like blocking SPAM: the - more aggressive you are about it, the more likely you are to block - things that were not intended. And the more likely that some things - may not work as intended. So there is a trade off here. If you want - extreme ad free browsing, be prepared to deal with more - <SPAN -CLASS="QUOTE" ->"problem"</SPAN -> sites, and to spend more time adjusting the - configuration to solve these unintended consequences. In short, there is - not an easy way to eliminate <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->all</I -></SPAN -> ads. Either take - the easy way and settle for <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->most</I -></SPAN -> ads blocked with the - default configuration, or jump in and tweak it for your personal surfing - habits and preferences.</P -><P -> Secondly, a brief explanation of <SPAN -CLASS="APPLICATION" ->Privoxy's </SPAN -> - <SPAN -CLASS="QUOTE" ->"actions"</SPAN ->. <SPAN -CLASS="QUOTE" ->"Actions"</SPAN -> in this context, are - the directives we use to tell <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to perform - some task relating to HTTP transactions (i.e. web browsing). We tell - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to take some <SPAN -CLASS="QUOTE" ->"action"</SPAN ->. Each - action has a unique name and function. While there are many potential - <SPAN -CLASS="APPLICATION" ->actions</SPAN -> in <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - arsenal, only a few are used for ad blocking. <A -HREF="actions-file.html#ACTIONS" ->Actions</A ->, and <A -HREF="actions-file.html" ->action - configuration files</A ->, are explained in depth below.</P -><P -> Actions are specified in <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> configuration, - followed by one or more URLs to which the action should apply. URLs - can actually be URL type <A -HREF="actions-file.html#AF-PATTERNS" ->patterns</A -> that use - wildcards so they can apply potentially to a range of similar URLs. The - actions, together with the URL patterns are called a section.</P -><P -> When you connect to a website, the full URL will either match one or more - of the sections as defined in <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> configuration, - or not. If so, then <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will perform the - respective actions. If not, then nothing special happens. Furthermore, web - pages may contain embedded, secondary URLs that your web browser will - use to load additional components of the page, as it parses the - original page's HTML content. An ad image for instance, is just an URL - embedded in the page somewhere. The image itself may be on the same server, - or a server somewhere else on the Internet. Complex web pages will have many - such embedded URLs. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can deal with each URL individually, so, for - instance, the main page text is not touched, but images from such-and-such - server are blocked.</P -><P -> The most important actions for basic ad blocking are: <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT ->, <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT ->, - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT" ->handle-as-empty-document</A -></TT ->,and - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A -></TT ->:</P -><P -> <P -></P -><UL -><LI -><P -> <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> - this is perhaps - the single most used action, and is particularly important for ad blocking. - This action stops any contact between your browser and any URL patterns - that match this action's configuration. It can be used for blocking ads, - but also anything that is determined to be unwanted. By itself, it simply - stops any communication with the remote server and sends - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s own built-in BLOCKED page instead to - let you now what has happened (with some exceptions, see below). - </P -></LI -><LI -><P -> <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT -> - - tells <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to treat this URL as an image. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->'s default configuration already does this - for all common image types (e.g. GIF), but there are many situations where this - is not so easy to determine. So we'll force it in these cases. This is particularly - important for ad blocking, since only if we know that it's an image of - some kind, can we replace it with an image of our choosing, instead of the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> BLOCKED page (which would only result in - a <SPAN -CLASS="QUOTE" ->"broken image"</SPAN -> icon). There are some limitations to this - though. For instance, you can't just brute-force an image substitution for - an entire HTML page in most situations. - </P -></LI -><LI -><P -> <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT" ->handle-as-empty-document</A -></TT -> - - sends an empty document instead of <SPAN -CLASS="APPLICATION" ->Privoxy's</SPAN -> - normal BLOCKED HTML page. This is useful for file types that are neither - HTML nor images, such as blocking JavaScript files. - </P -></LI -><LI -><P -> <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#SET-IMAGE-BLOCKER" ->set-image-blocker</A -></TT -> - tells - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> what to display in place of an ad image that - has hit a block rule. For this to come into play, the URL must match a - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> action somewhere in the - configuration, <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->and</I -></SPAN ->, it must also match an - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#HANDLE-AS-IMAGE" ->handle-as-image</A -></TT -> action. - </P -><P -> The configuration options on what to display instead of the ad are: - </P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->pattern</I -></SPAN -> - a checkerboard pattern, so that an ad - replacement is obvious. This is the default. - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->blank</I -></SPAN -> - A very small empty GIF image is displayed. - This is the so-called <SPAN -CLASS="QUOTE" ->"invisible"</SPAN -> configuration option. - </TD -></TR -></TBODY -></TABLE -><P -></P -><P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->http://<URL></I -></SPAN -> - A redirect to any image anywhere - of the user's choosing (advanced usage). - </TD -></TR -></TBODY -></TABLE -><P -></P -></LI -></UL -></P -><P -> Advanced users will eventually want to explore <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#FILTER" ->filters</A -></TT -> as well. Filters - are very different from <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->blocks</A -></TT ->. - A <SPAN -CLASS="QUOTE" ->"block"</SPAN -> blocks a site, page, or unwanted contented. Filters - are a way of filtering or modifying what is actually on the page. An example - filter usage: a text replacement of <SPAN -CLASS="QUOTE" ->"no-no"</SPAN -> for - <SPAN -CLASS="QUOTE" ->"nasty-word"</SPAN ->. That is a very simple example. This process can be - used for ad blocking, but it is more in the realm of advanced usage and has - some pitfalls to be wary off.</P -><P -> The quickest way to adjust any of these settings is with your browser through - the special <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> editor at <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A -> - (shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/show-status</A ->). This - is an internal page, and does not require Internet access.</P -><P -> Note that as of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> 3.0.7 beta the - action editor is disabled by default. Check the - <A -HREF="config.html#ENABLE-EDIT-ACTIONS" -TARGET="_top" ->enable-edit-actions - section in the configuration file</A -> to learn why and in which - cases it's safe to enable again.</P -><P -> If you decided to enable the action editor, select the appropriate - <SPAN -CLASS="QUOTE" ->"actions"</SPAN -> file, and click - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Edit</SPAN ->"</SPAN ->. It is best to put personal or - local preferences in <TT -CLASS="FILENAME" ->user.action</TT -> since this is not - meant to be overwritten during upgrades, and will over-ride the settings in - other files. Here you can insert new <SPAN -CLASS="QUOTE" ->"actions"</SPAN ->, and URLs for ad - blocking or other purposes, and make other adjustments to the configuration. - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will detect these changes automatically.</P -><P -> A quick and simple step by step example:</P -><P -> <P -></P -><UL -><LI -><P -> Right click on the ad image to be blocked, then select - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIMENUITEM" ->Copy Link Location</SPAN ->"</SPAN -> from the - pop-up menu. - </P -></LI -><LI -><P -> Set your browser to - <A -HREF="http://config.privoxy.org/show-status" -TARGET="_top" ->http://config.privoxy.org/show-status</A -> - </P -></LI -><LI -><P -> Find <TT -CLASS="FILENAME" ->user.action</TT -> in the top section, and click - on <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Edit</SPAN ->"</SPAN ->: - </P -><P -> <DIV -CLASS="FIGURE" -><A -NAME="AEN530" -></A -><P -><B ->Figure 1. Actions Files in Use</B -></P -><DIV -CLASS="MEDIAOBJECT" -><P -><IMG -SRC="files-in-use.jpg"></P -></DIV -></DIV -> - </P -></LI -><LI -><P -> You should have a section with only - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> listed under - <SPAN -CLASS="QUOTE" ->"Actions:"</SPAN ->. - If not, click a <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Insert new section below</SPAN ->"</SPAN -> - button, and in the new section that just appeared, click the - <SPAN -CLASS="GUIBUTTON" ->Edit</SPAN -> button right under the word <SPAN -CLASS="QUOTE" ->"Actions:"</SPAN ->. - This will bring up a list of all actions. Find - <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> near the top, and click - in the <SPAN -CLASS="QUOTE" ->"Enabled"</SPAN -> column, then <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Submit</SPAN ->"</SPAN -> - just below the list. - </P -></LI -><LI -><P -> Now, in the <TT -CLASS="LITERAL" -><A -HREF="actions-file.html#BLOCK" ->block</A -></TT -> actions section, - click the <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Add</SPAN ->"</SPAN -> button, and paste the URL the - browser got from <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIMENUITEM" ->Copy Link Location</SPAN ->"</SPAN ->. - Remove the <TT -CLASS="LITERAL" ->http://</TT -> at the beginning of the URL. Then, click - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->Submit</SPAN ->"</SPAN -> (or - <SPAN -CLASS="QUOTE" ->"<SPAN -CLASS="GUIBUTTON" ->OK</SPAN ->"</SPAN -> if in a pop-up window). - </P -></LI -><LI -><P -> Now go back to the original page, and press <B -CLASS="KEYCAP" ->SHIFT-Reload</B -> - (or flush all browser caches). The image should be gone now. - </P -></LI -></UL -></P -><P -> This is a very crude and simple example. There might be good reasons to use a - wildcard pattern match to include potentially similar images from the same - site. For a more extensive explanation of <SPAN -CLASS="QUOTE" ->"patterns"</SPAN ->, and - the entire actions concept, see <A -HREF="actions-file.html" ->the Actions - section</A ->.</P -><P -> For advanced users who want to hand edit their config files, you might want - to now go to the <A -HREF="actions-file.html#ACT-EXAMPLES" ->Actions Files Tutorial</A ->. - The ideas explained therein also apply to the web-based editor.</P -><P -> There are also various - <A -HREF="actions-file.html#FILTER" ->filters</A -> that can be used for ad blocking - (filters are a special subset of actions). These - fall into the <SPAN -CLASS="QUOTE" ->"advanced"</SPAN -> usage category, and are explained in - depth in later sections. </P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="whatsnew.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="startup.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->What's New in this Release</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Starting Privoxy</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/seealso.html b/external/privoxy/doc/webserver/user-manual/seealso.html deleted file mode 100644 index 93a8b2d..0000000 --- a/external/privoxy/doc/webserver/user-manual/seealso.html +++ /dev/null @@ -1,418 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->See Also</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Privoxy Copyright, License and History" -HREF="copyright.html"><LINK -REL="NEXT" -TITLE="Appendix" -HREF="appendix.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="copyright.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="appendix.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="SEEALSO" ->13. See Also</A -></H1 -><P -> Other references and sites of interest to <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - users:</P -><P -> <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/" -TARGET="_top" ->http://www.privoxy.org/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Home page. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/faq/" -TARGET="_top" ->http://www.privoxy.org/faq/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> FAQ. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.privoxy.org/developer-manual/" -TARGET="_top" ->http://www.privoxy.org/developer-manual/</A ->, - the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> developer manual. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://sourceforge.net/projects/ijbswa/" -TARGET="_top" ->https://sourceforge.net/projects/ijbswa/</A ->, - the Project Page for <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> on - <A -HREF="http://sourceforge.net" -TARGET="_top" ->SourceForge</A ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A ->, - the web-based user interface. <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> must be - running for this to work. Shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A -> - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://sourceforge.net/tracker/?group_id=11118&atid=460288" -TARGET="_top" ->https://sourceforge.net/tracker/?group_id=11118&atid=460288</A ->, to submit <SPAN -CLASS="QUOTE" ->"misses"</SPAN -> and other - configuration related suggestions to the developers. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - - - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.junkbusters.com/ht/en/cookies.html" -TARGET="_top" ->http://www.junkbusters.com/ht/en/cookies.html</A ->, - an explanation how cookies are used to track web users. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.junkbusters.com/ijb.html" -TARGET="_top" ->http://www.junkbusters.com/ijb.html</A ->, - the original Internet Junkbuster. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.squid-cache.org/" -TARGET="_top" ->http://www.squid-cache.org/</A ->, a popular - caching proxy, which is often used together with <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="http://www.pps.jussieu.fr/~jch/software/polipo/" -TARGET="_top" ->http://www.pps.jussieu.fr/~jch/software/polipo/</A ->, - <SPAN -CLASS="APPLICATION" ->Polipo</SPAN -> is a caching proxy with advanced features - like pipelining, multiplexing and caching of partial instances. In many setups - it can be used as <SPAN -CLASS="APPLICATION" ->Squid</SPAN -> replacement. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - <P -></P -><TABLE -BORDER="0" -><TBODY -><TR -><TD -> <A -HREF="https://www.torproject.org/" -TARGET="_top" ->https://www.torproject.org/</A ->, - <SPAN -CLASS="APPLICATION" ->Tor</SPAN -> can help anonymize web browsing, - web publishing, instant messaging, IRC, SSH, and other applications. - </TD -></TR -></TBODY -></TABLE -><P -></P -> - </P -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="copyright.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="appendix.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Privoxy Copyright, License and History</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Appendix</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/startup.html b/external/privoxy/doc/webserver/user-manual/startup.html deleted file mode 100644 index e4f0c23..0000000 --- a/external/privoxy/doc/webserver/user-manual/startup.html +++ /dev/null @@ -1,902 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Starting Privoxy</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Quickstart to Using Privoxy" -HREF="quickstart.html"><LINK -REL="NEXT" -TITLE="Privoxy Configuration" -HREF="configuration.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="quickstart.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="configuration.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="STARTUP" ->5. Starting Privoxy</A -></H1 -><P -> Before launching <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> for the first time, you - will want to configure your browser(s) to use - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> as a HTTP and HTTPS (SSL) - <A -HREF="http://en.wikipedia.org/wiki/Proxy_server" -TARGET="_top" ->proxy</A ->. The default is - 127.0.0.1 (or localhost) for the proxy address, and port 8118 (earlier versions - used port 8000). This is the one configuration step <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->that must be done</I -></SPAN ->!</P -><P -> Please note that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can only proxy HTTP and - HTTPS traffic. It will not work with FTP or other protocols.</P -><P -> <DIV -CLASS="FIGURE" -><A -NAME="AEN585" -></A -><P -><B ->Figure 2. Proxy Configuration Showing - Mozilla/Netscape HTTP and HTTPS (SSL) Settings</B -></P -><DIV -CLASS="MEDIAOBJECT" -><P -><IMG -SRC="proxy_setup.jpg"></P -></DIV -></DIV -> - </P -><P -> - With <SPAN -CLASS="APPLICATION" ->Firefox</SPAN ->, this is typically set under:</P -><P -CLASS="LITERALLAYOUT" -> <SPAN -CLASS="GUIBUTTON" ->Tools</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Options</SPAN -> ->  <SPAN -CLASS="GUIBUTTON" ->Advanced</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Network</SPAN -> -><SPAN -CLASS="GUIBUTTON" ->Connection</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Settings</SPAN -><br></P -><P -> - Or optionally on some platforms:</P -><P -CLASS="LITERALLAYOUT" -> <SPAN -CLASS="GUIBUTTON" ->Edit</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Preferences</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->General</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Connection Settings</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Manual Proxy Configuration</SPAN -><br></P -><P -> - With <SPAN -CLASS="APPLICATION" ->Netscape</SPAN -> (and - <SPAN -CLASS="APPLICATION" ->Mozilla</SPAN ->), this can be set under:</P -><P -CLASS="LITERALLAYOUT" -> <SPAN -CLASS="GUIBUTTON" ->Edit</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Preferences</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Advanced</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Proxies</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->HTTP Proxy</SPAN -><br></P -><P -> For <SPAN -CLASS="APPLICATION" ->Internet Explorer v.5-7</SPAN ->: </P -><P -CLASS="LITERALLAYOUT" -> <SPAN -CLASS="GUIBUTTON" ->Tools</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Internet Options</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->Connections</SPAN -> -> <SPAN -CLASS="GUIBUTTON" ->LAN Settings</SPAN -></P -><P -> Then, check <SPAN -CLASS="QUOTE" ->"Use Proxy"</SPAN -> and fill in the appropriate info - (Address: 127.0.0.1, Port: 8118). Include HTTPS (SSL), if you want HTTPS - proxy support too (sometimes labeled <SPAN -CLASS="QUOTE" ->"Secure"</SPAN ->). Make sure any - checkboxes like <SPAN -CLASS="QUOTE" ->"Use the same proxy server for all protocols"</SPAN -> is - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->UNCHECKED</I -></SPAN ->. You want only HTTP and HTTPS (SSL)!</P -><P -> <DIV -CLASS="FIGURE" -><A -NAME="AEN630" -></A -><P -><B ->Figure 3. Proxy Configuration Showing - Internet Explorer HTTP and HTTPS (Secure) Settings</B -></P -><DIV -CLASS="MEDIAOBJECT" -><P -><IMG -SRC="proxy2.jpg"></P -></DIV -></DIV -> - </P -><P -> After doing this, flush your browser's disk and memory caches to force a - re-reading of all pages and to get rid of any ads that may be cached. Remove - any <A -HREF="http://en.wikipedia.org/wiki/Browser_cookie" -TARGET="_top" ->cookies</A ->, - if you want <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to manage that. You are now - ready to start enjoying the benefits of using - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->!</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> itself is typically started by specifying the - main configuration file to be used on the command line. If no configuration - file is specified on the command line, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - will look for a file named <TT -CLASS="FILENAME" ->config</TT -> in the current - directory. Except on Win32 where it will try <TT -CLASS="FILENAME" ->config.txt</TT ->.</P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-REDHAT" ->5.1. Red Hat and Fedora</A -></H2 -><P -> A default Red Hat installation may not start <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> upon boot. It will use - the file <TT -CLASS="FILENAME" ->/etc/privoxy/config</TT -> as its main configuration - file.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # /etc/rc.d/init.d/privoxy start</PRE -></TD -></TR -></TABLE -></P -><P -> Or ...</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # service privoxy start</PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-DEBIAN" ->5.2. Debian</A -></H2 -><P -> We use a script. Note that Debian typically starts <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> upon booting per - default. It will use the file - <TT -CLASS="FILENAME" ->/etc/privoxy/config</TT -> as its main configuration - file.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # /etc/init.d/privoxy start</PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-WINDOWS" ->5.3. Windows</A -></H2 -><P ->Click on the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> Icon to start <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. If no configuration file is - specified on the command line, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will look - for a file named <TT -CLASS="FILENAME" ->config.txt</TT ->. Note that Windows will - automatically start <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> when the system starts if you chose that option - when installing.</P -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> can run with full Windows service functionality. - On Windows only, the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> program has two new command line arguments - to install and uninstall <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> as a service. See the - <A -HREF="installation.html#INSTALLATION-PACK-WIN" ->Windows Installation - instructions</A -> for details.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-UNICES" ->5.4. Solaris, NetBSD, FreeBSD, HP-UX and others</A -></H2 -><P ->Example Unix startup command:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> # /usr/sbin/privoxy /etc/privoxy/config</PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-OS2" ->5.5. OS/2</A -></H2 -><P -> During installation, <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is configured to - start automatically when the system restarts. You can start it manually by - double-clicking on the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> icon in the - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> folder.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-MACOSX" ->5.6. Mac OS X</A -></H2 -><P -> After downloading the privoxy software, unzip the downloaded file by - double-clicking on the zip file icon. Then, double-click on the - installer package icon and follow the installation process.</P -><P -> The privoxy service will automatically start after a successful - installation. In addition, the privoxy service will automatically - start every time your computer starts up.</P -><P -> To prevent the privoxy service from automatically starting when your - computer starts up, remove or rename the folder named - /Library/StartupItems/Privoxy.</P -><P -> A simple application named Privoxy Utility has been created which - enables administrators to easily start and stop the privoxy service.</P -><P -> In addition, the Privoxy Utility presents a simple way for - administrators to edit the various privoxy config files. A method - to uninstall the software is also available.</P -><P -> An administrator username and password must be supplied in order for - the Privoxy Utility to perform any of the tasks.</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-AMIGAOS" ->5.7. AmigaOS</A -></H2 -><P -> Start <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> (with RUN <>NIL:) in your - <TT -CLASS="FILENAME" ->startnet</TT -> script (AmiTCP), in - <TT -CLASS="FILENAME" ->s:user-startup</TT -> (RoadShow), as startup program in your - startup script (Genesis), or as startup action (Miami and MiamiDx). - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will automatically quit when you quit your - TCP/IP stack (just ignore the harmless warning your TCP/IP stack may display that - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is still running).</P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="START-GENTOO" ->5.8. Gentoo</A -></H2 -><P -> A script is again used. It will use the file <TT -CLASS="FILENAME" ->/etc/privoxy/config - </TT -> as its main configuration file.</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> /etc/init.d/privoxy start - </PRE -></TD -></TR -></TABLE -></P -><P -> Note that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is not automatically started at - boot time by default. You can change this with the <TT -CLASS="LITERAL" ->rc-update</TT -> - command.</P -><P -> - <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> rc-update add privoxy default - </PRE -></TD -></TR -></TABLE -></P -></DIV -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="CMDOPTIONS" ->5.9. Command Line Options</A -></H2 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> may be invoked with the following - command-line options:</P -><P -> <P -></P -><UL -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--version</I -></SPAN -> - </P -><P -> Print version info and exit. Unix only. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--help</I -></SPAN -> - </P -><P -> Print short usage info and exit. Unix only. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--no-daemon</I -></SPAN -> - </P -><P -> Don't become a daemon, i.e. don't fork and become process group - leader, and don't detach from controlling tty. Unix only. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--pidfile FILE</I -></SPAN -> - </P -><P -> On startup, write the process ID to <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->FILE</I -></SPAN ->. Delete the - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->FILE</I -></SPAN -> on exit. Failure to create or delete the - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->FILE</I -></SPAN -> is non-fatal. If no <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->FILE</I -></SPAN -> - option is given, no PID file will be used. Unix only. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--user USER[.GROUP]</I -></SPAN -> - </P -><P -> After (optionally) writing the PID file, assume the user ID of - <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->USER</I -></SPAN ->, and if included the GID of GROUP. Exit if the - privileges are not sufficient to do so. Unix only. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--chroot</I -></SPAN -> - </P -><P -> Before changing to the user ID given in the <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--user</I -></SPAN -> option, - chroot to that user's home directory, i.e. make the kernel pretend to the <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - process that the directory tree starts there. If set up carefully, this can limit - the impact of possible vulnerabilities in <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to the files contained in that hierarchy. - Unix only. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->--pre-chroot-nslookup hostname</I -></SPAN -> - </P -><P -> Specifies a hostname to look up before doing a chroot. On some systems, initializing the - resolver library involves reading config files from /etc and/or loading additional shared - libraries from /lib. On these systems, doing a hostname lookup before the chroot reduces - the number of files that must be copied into the chroot tree. - </P -><P -> For fastest startup speed, a good value is a hostname that is not in /etc/hosts but that - your local name server (listed in /etc/resolv.conf) can resolve without recursion - (that is, without having to ask any other name servers). The hostname need not exist, - but if it doesn't, an error message (which can be ignored) will be output. - </P -></LI -><LI -><P -> <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->configfile</I -></SPAN -> - </P -><P -> If no <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->configfile</I -></SPAN -> is included on the command line, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will look for a file named - <SPAN -CLASS="QUOTE" ->"config"</SPAN -> in the current directory (except on Win32 - where it will look for <SPAN -CLASS="QUOTE" ->"config.txt"</SPAN -> instead). Specify - full path to avoid confusion. If no config file is found, - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> will fail to start. - </P -></LI -></UL -></P -><P -> On <SPAN -CLASS="APPLICATION" ->MS Windows</SPAN -> only there are two additional - command-line options to allow <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> to install and - run as a <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->service</I -></SPAN ->. See the -<A -HREF="installation.html#INSTALLATION-PACK-WIN" ->Window Installation section</A -> -for details.</P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="quickstart.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="configuration.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Quickstart to Using Privoxy</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Privoxy Configuration</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/templates.html b/external/privoxy/doc/webserver/user-manual/templates.html deleted file mode 100644 index 7e31c75..0000000 --- a/external/privoxy/doc/webserver/user-manual/templates.html +++ /dev/null @@ -1,321 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->Privoxy's Template Files</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Filter Files" -HREF="filter-file.html"><LINK -REL="NEXT" -TITLE="Contacting the Developers, Bug Reporting and Feature -Requests" -HREF="contact.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="filter-file.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="contact.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="TEMPLATES" ->10. Privoxy's Template Files</A -></H1 -><P -> All <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> built-in pages, i.e. error pages such as the - <A -HREF="http://show-the-404-error.page" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"404 - No Such Domain"</SPAN -> - error page</A ->, the <A -HREF="http://ads.bannerserver.example.com/nasty-ads/sponsor.html" -TARGET="_top" -><SPAN -CLASS="QUOTE" ->"BLOCKED"</SPAN -> - page</A -> - and all pages of its <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->web-based - user interface</A ->, are generated from <SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->templates</I -></SPAN ->. - (<SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> must be running for the above links to work as - intended.)</P -><P -> These templates are stored in a subdirectory of the <A -HREF="config.html#CONFDIR" ->configuration - directory</A -> called <TT -CLASS="FILENAME" ->templates</TT ->. On Unixish platforms, - this is typically - <A -HREF="file:///etc/privoxy/templates/" -TARGET="_top" -><TT -CLASS="FILENAME" ->/etc/privoxy/templates/</TT -></A ->.</P -><P -> The templates are basically normal HTML files, but with place-holders (called symbols - or exports), which <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> fills at run time. It - is possible to edit the templates with a normal text editor, should you want - to customize them. (<SPAN -CLASS="emphasis" -><I -CLASS="EMPHASIS" ->Not recommended for the casual - user</I -></SPAN ->). Should you create your own custom templates, you should use - the <TT -CLASS="FILENAME" ->config</TT -> setting <A -HREF="config.html#TEMPLDIR" ->templdir</A -> - to specify an alternate location, so your templates do not get overwritten - during upgrades. - </P -><P -> Note that just like in configuration files, lines starting - with <TT -CLASS="LITERAL" ->#</TT -> are ignored when the templates are filled in.</P -><P -> The place-holders are of the form <TT -CLASS="LITERAL" ->@name@</TT ->, and you will - find a list of available symbols, which vary from template to template, - in the comments at the start of each file. Note that these comments are not - always accurate, and that it's probably best to look at the existing HTML - code to find out which symbols are supported and what they are filled in with.</P -><P -> A special application of this substitution mechanism is to make whole - blocks of HTML code disappear when a specific symbol is set. We use this - for many purposes, one of them being to include the beta warning in all - our user interface (CGI) pages when <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is in an alpha or beta development stage:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -> - - ... beta warning HTML code goes here ... - -</PRE -></TD -></TR -></TABLE -></P -><P -> If the "unstable" symbol is set, everything in between and including - <TT -CLASS="LITERAL" ->@if-unstable-start</TT -> and <TT -CLASS="LITERAL" ->if-unstable-end@</TT -> - will disappear, leaving nothing but an empty comment:</P -><P -> <TABLE -BORDER="0" -BGCOLOR="#E0E0E0" -WIDTH="100%" -><TR -><TD -><PRE -CLASS="SCREEN" -></PRE -></TD -></TR -></TABLE -></P -><P -> There's also an if-then-else construct and an <TT -CLASS="LITERAL" ->#include</TT -> - mechanism, but you'll sure find out if you are inclined to edit the - templates ;-)</P -><P -> All templates refer to a style located at - <A -HREF="http://config.privoxy.org/send-stylesheet" -TARGET="_top" -><TT -CLASS="LITERAL" ->http://config.privoxy.org/send-stylesheet</TT -></A ->. - This is, of course, locally served by <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - and the source for it can be found and edited in the - <TT -CLASS="FILENAME" ->cgi-style.css</TT -> template.</P -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="filter-file.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="contact.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Filter Files</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Contacting the Developers, Bug Reporting and Feature -Requests</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/upgradersnote.html b/external/privoxy/doc/webserver/user-manual/upgradersnote.html deleted file mode 100644 index 36be7bc..0000000 --- a/external/privoxy/doc/webserver/user-manual/upgradersnote.html +++ /dev/null @@ -1,296 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<HTML -><HEAD -><TITLE ->Note to Upgraders</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.7"><LINK -REL="HOME" -TITLE="Privoxy 3.0.3 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Installation" -HREF="installation.html"><LINK -REL="NEXT" -TITLE="Quickstart to Using Privoxy" -HREF="quickstart.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"></HEAD -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.3 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="installation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="quickstart.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="UPGRADERSNOTE" ->3. Note to Upgraders</A -></H1 -><P -> There are very significant changes from earlier - <SPAN -CLASS="APPLICATION" ->Junkbuster</SPAN -> versions to the current - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. The number, names, syntax, and - purposes of configuration files have substantially changed. - <SPAN -CLASS="APPLICATION" ->Junkbuster 2.0.x</SPAN -> configuration - files will not migrate, <SPAN -CLASS="APPLICATION" ->Junkbuster 2.9.x</SPAN -> - and <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> configurations will need to be - ported. The functionalities of the old <TT -CLASS="FILENAME" ->blockfile</TT ->, - <TT -CLASS="FILENAME" ->cookiefile</TT -> and <TT -CLASS="FILENAME" ->imagelist</TT -> - are now combined into the <A -HREF="actions-file.html" -><SPAN -CLASS="QUOTE" ->"actions - files"</SPAN -></A ->. - <TT -CLASS="FILENAME" ->default.action</TT ->, is the main actions file. Local - exceptions should best be put into <TT -CLASS="FILENAME" ->user.action</TT ->.</P -><P -> A <A -HREF="filter-file.html" -><SPAN -CLASS="QUOTE" ->"filter file"</SPAN -></A -> (typically - <TT -CLASS="FILENAME" ->default.filter</TT ->) is new as of <SPAN -CLASS="APPLICATION" ->Privoxy - 2.9.x</SPAN ->, and provides some of the new sophistication (explained - below). <TT -CLASS="FILENAME" ->config</TT -> is much the same as before.</P -><P -> If upgrading from a 2.0.x version, you will have to use the new config - files, and possibly adapt any personal rules from your older files. - When porting personal rules over from the old <TT -CLASS="FILENAME" ->blockfile</TT -> - to the new actions files, please note that even the pattern syntax has - changed. If upgrading from 2.9.x development versions, it is still - recommended to use the new configuration files.</P -><P -> A quick list of things to be aware of before upgrading: </P -><P -> <P -></P -><UL -><LI -><P -> The default listening port is now 8118 due to a conflict with another - service (NAS). - </P -></LI -><LI -><P -> - Some installers may remove earlier versions completely. Save any - important configuration files! - </P -></LI -><LI -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is controllable with a web browser - at the special URL: <A -HREF="http://config.privoxy.org/" -TARGET="_top" ->http://config.privoxy.org/</A -> - (Shortcut: <A -HREF="http://p.p/" -TARGET="_top" ->http://p.p/</A ->). Many - aspects of configuration can be done here, including temporarily disabling - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->. - </P -></LI -><LI -><P -> The primary configuration files for cookie management, ad and banner - blocking, and many other aspects of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - configuration are the <A -HREF="actions-file.html" ->actions - files</A ->. It is strongly recommended to become familiar with the new - actions concept below, before modifying these files. Locally defined rules - should go into <TT -CLASS="FILENAME" ->user.action</TT ->. - </P -></LI -><LI -><P -> - Some installers may not automatically start - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> after installation. - </P -></LI -></UL -></P -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="installation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="quickstart.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Installation</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Quickstart to Using <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -></TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/doc/webserver/user-manual/whatsnew.html b/external/privoxy/doc/webserver/user-manual/whatsnew.html deleted file mode 100644 index 5d7c0b2..0000000 --- a/external/privoxy/doc/webserver/user-manual/whatsnew.html +++ /dev/null @@ -1,351 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd"> -<HTML -><HEAD -><TITLE ->What's New in this Release</TITLE -><META -NAME="GENERATOR" -CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK -REL="HOME" -TITLE="Privoxy 3.0.12 User Manual" -HREF="index.html"><LINK -REL="PREVIOUS" -TITLE="Installation" -HREF="installation.html"><LINK -REL="NEXT" -TITLE="Quickstart to Using Privoxy" -HREF="quickstart.html"><LINK -REL="STYLESHEET" -TYPE="text/css" -HREF="../p_doc.css"><META -HTTP-EQUIV="Content-Type" -CONTENT="text/html; -charset=ISO-8859-1"> -<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css"> -</head -><BODY -CLASS="SECT1" -BGCOLOR="#EEEEEE" -TEXT="#000000" -LINK="#0000FF" -VLINK="#840084" -ALINK="#0000FF" -><DIV -CLASS="NAVHEADER" -><TABLE -SUMMARY="Header navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TH -COLSPAN="3" -ALIGN="center" ->Privoxy 3.0.12 User Manual</TH -></TR -><TR -><TD -WIDTH="10%" -ALIGN="left" -VALIGN="bottom" -><A -HREF="installation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="80%" -ALIGN="center" -VALIGN="bottom" -></TD -><TD -WIDTH="10%" -ALIGN="right" -VALIGN="bottom" -><A -HREF="quickstart.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -></TABLE -><HR -ALIGN="LEFT" -WIDTH="100%"></DIV -><DIV -CLASS="SECT1" -><H1 -CLASS="SECT1" -><A -NAME="WHATSNEW" ->3. What's New in this Release</A -></H1 -><P -> <SPAN -CLASS="APPLICATION" ->Privoxy 3.0.12</SPAN -> is mainly a bugfix release:</P -><P -> <P -></P -><UL -><LI -><P -> The socket-timeout option now also works on platforms whose - select() implementation modifies the timeout structure. - Previously the timeout was triggered even if the connection - didn't stall. Reported by cyberpatrol. - </P -></LI -><LI -><P -> The Connection: keep-alive code properly deals with files - larger than 2GB. Previously the connection was closed too - early. - </P -></LI -><LI -><P -> The content length for files above 2GB is logged correctly. - </P -></LI -><LI -><P -> The user-manual directive on the show-status page links to - the documentation location specified with the directive, - not to the Privoxy website. - </P -></LI -><LI -><P -> When running in daemon mode, Privoxy doesn't log anything - to the console unless there are errors before the logfile - has been opened. - </P -></LI -><LI -><P -> The show-status page prints warnings about invalid directives - on the same line as the directives themselves. - </P -></LI -><LI -><P -> Fixed several justified (but harmless) compiler warnings, - mostly on 64 bit platforms. - </P -></LI -><LI -><P -> The mingw32 version explicitly requests the default charset - to prevent display problems with some fonts available on more - recent Windows versions. Patch by Burberry. - </P -></LI -><LI -><P -> The mingw32 version uses the Privoxy icon in the alt-tab - windows. Patch by Burberry. - </P -></LI -><LI -><P -> The timestamp and the thread id is omitted in the "Fatal error" - message box on mingw32. - </P -></LI -><LI -><P -> Fixed two related mingw32-only buffer overflows. Triggering - them required control over the configuration file, therefore - this isn't seen as a security issue. - </P -></LI -><LI -><P -> In verbose mode, or if the new option --show-skipped-tests - is used, Privoxy-Regression-Test logs skipped tests and the - skip reason. - </P -></LI -></UL -></P -><DIV -CLASS="SECT2" -><H2 -CLASS="SECT2" -><A -NAME="UPGRADERSNOTE" ->3.1. Note to Upgraders</A -></H2 -><P -> A quick list of things to be aware of before upgrading from earlier - versions of <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN ->:</P -><P -> <P -></P -><UL -><LI -><P -> The recommended way to upgrade <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> is to backup your old - configuration files, install the new ones, verify that <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> - is working correctly and finally merge back your changes using - <SPAN -CLASS="APPLICATION" ->diff</SPAN -> and maybe <SPAN -CLASS="APPLICATION" ->patch</SPAN ->. - </P -><P -> There are a number of new features in each <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> release and - most of them have to be explicitly enabled in the configuration - files. Old configuration files obviously don't do that and due - to syntax changes using old configuration files with a new - <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> isn't always possible anyway. - </P -></LI -><LI -><P -> - Note that some installers remove earlier versions completely, - including configuration files, therefore you should really save - any important configuration files! - </P -></LI -><LI -><P -> - On the other hand, other installers don't overwrite existing configuration - files, thinking you will want to do that yourself. - </P -></LI -><LI -><P -> - <TT -CLASS="FILENAME" ->standard.action</TT -> has been merged into - the <TT -CLASS="FILENAME" ->default.action</TT -> file. - </P -></LI -><LI -><P -> In the default configuration only fatal errors are logged now. - You can change that in the <A -HREF="config.html#DEBUG" ->debug section</A -> - of the configuration file. You may also want to enable more verbose - logging until you verified that the new <SPAN -CLASS="APPLICATION" ->Privoxy</SPAN -> version is working - as expected. - </P -></LI -><LI -><P -> Three other config file settings are now off by default: - <A -HREF="config.html#ENABLE-REMOTE-TOGGLE" ->enable-remote-toggle</A ->, - <A -HREF="config.html#ENABLE-REMOTE-HTTP-TOGGLE" ->enable-remote-http-toggle</A ->, - and <A -HREF="config.html#ENABLE-EDIT-ACTIONS" ->enable-edit-actions</A ->. - If you use or want these, you will need to explicitly enable them, and - be aware of the security issues involved. - </P -></LI -></UL -></P -></DIV -></DIV -><DIV -CLASS="NAVFOOTER" -><HR -ALIGN="LEFT" -WIDTH="100%"><TABLE -SUMMARY="Footer navigation table" -WIDTH="100%" -BORDER="0" -CELLPADDING="0" -CELLSPACING="0" -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" -><A -HREF="installation.html" -ACCESSKEY="P" ->Prev</A -></TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -><A -HREF="index.html" -ACCESSKEY="H" ->Home</A -></TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" -><A -HREF="quickstart.html" -ACCESSKEY="N" ->Next</A -></TD -></TR -><TR -><TD -WIDTH="33%" -ALIGN="left" -VALIGN="top" ->Installation</TD -><TD -WIDTH="34%" -ALIGN="center" -VALIGN="top" -> </TD -><TD -WIDTH="33%" -ALIGN="right" -VALIGN="top" ->Quickstart to Using Privoxy</TD -></TR -></TABLE -></DIV -></BODY -></HTML -> \ No newline at end of file diff --git a/external/privoxy/encode.c b/external/privoxy/encode.c deleted file mode 100644 index d4bb1ce..0000000 --- a/external/privoxy/encode.c +++ /dev/null @@ -1,430 +0,0 @@ -const char encode_rcs[] = "$Id: encode.c,v 1.14 2008/05/21 15:38:13 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/encode.c,v $ - * - * Purpose : Functions to encode and decode URLs, and also to - * encode cookies and HTML text. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: encode.c,v $ - * Revision 1.14 2008/05/21 15:38:13 fabiankeil - * Garbage-collect cookie_encode(). - * - * Revision 1.13 2007/08/18 14:34:27 fabiankeil - * Make xtoi() extern so it can be used in pcrs.c. - * - * Revision 1.12 2007/08/04 10:15:51 fabiankeil - * Use strlcpy() instead of strcpy(). - * - * Revision 1.11 2006/12/28 18:25:53 fabiankeil - * Fixed gcc43 compiler warning. - * - * Revision 1.10 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.8 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.7 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.6 2002/03/13 00:27:04 jongfoster - * Killing warnings - * - * Revision 1.5 2002/03/07 03:46:53 oes - * Fixed compiler warnings etc - * - * Revision 1.4 2002/01/22 23:28:07 jongfoster - * Adding convenience function html_encode_and_free_original() - * Making all functions accept NULL paramaters - in this case, they - * simply return NULL. This allows error-checking to be deferred. - * - * Revision 1.3 2001/11/13 00:16:40 jongfoster - * Replacing references to malloc.h with the standard stdlib.h - * (See ANSI or K&R 2nd Ed) - * - * Revision 1.2 2001/05/17 22:52:35 oes - * - Cleaned CRLF's from the sources and related files - * - * Revision 1.1.1.1 2001/05/15 13:58:51 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <assert.h> - -#include "miscutil.h" -#include "encode.h" - -const char encode_h_rcs[] = ENCODE_H_VERSION; - -/* Maps special characters in a URL to their equivalent % codes. */ -static const char * const url_code_map[256] = { - NULL, "%01", "%02", "%03", "%04", "%05", "%06", "%07", "%08", "%09", - "%0A", "%0B", "%0C", "%0D", "%0E", "%0F", "%10", "%11", "%12", "%13", - "%14", "%15", "%16", "%17", "%18", "%19", "%1A", "%1B", "%1C", "%1D", - "%1E", "%1F", "+", "%21", "%22", "%23", "%24", "%25", "%26", "%27", - "%28", "%29", NULL, "%2B", "%2C", NULL, NULL, "%2F", NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "%3A", "%3B", - "%3C", "%3D", "%3E", "%3F", NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, "%5B", "%5C", "%5D", "%5E", NULL, "%60", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, "%7B", "%7C", "%7D", "%7E", "%7F", "%80", "%81", - "%82", "%83", "%84", "%85", "%86", "%87", "%88", "%89", "%8A", "%8B", - "%8C", "%8D", "%8E", "%8F", "%90", "%91", "%92", "%93", "%94", "%95", - "%96", "%97", "%98", "%99", "%9A", "%9B", "%9C", "%9D", "%9E", "%9F", - "%A0", "%A1", "%A2", "%A3", "%A4", "%A5", "%A6", "%A7", "%A8", "%A9", - "%AA", "%AB", "%AC", "%AD", "%AE", "%AF", "%B0", "%B1", "%B2", "%B3", - "%B4", "%B5", "%B6", "%B7", "%B8", "%B9", "%BA", "%BB", "%BC", "%BD", - "%BE", "%BF", "%C0", "%C1", "%C2", "%C3", "%C4", "%C5", "%C6", "%C7", - "%C8", "%C9", "%CA", "%CB", "%CC", "%CD", "%CE", "%CF", "%D0", "%D1", - "%D2", "%D3", "%D4", "%D5", "%D6", "%D7", "%D8", "%D9", "%DA", "%DB", - "%DC", "%DD", "%DE", "%DF", "%E0", "%E1", "%E2", "%E3", "%E4", "%E5", - "%E6", "%E7", "%E8", "%E9", "%EA", "%EB", "%EC", "%ED", "%EE", "%EF", - "%F0", "%F1", "%F2", "%F3", "%F4", "%F5", "%F6", "%F7", "%F8", "%F9", - "%FA", "%FB", "%FC", "%FD", "%FE", "%FF" -}; - -/* Maps special characters in HTML to their equivalent entites. */ -static const char * const html_code_map[256] = { - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL,""",NULL,NULL,NULL,"&",NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - "<",NULL,">",NULL,NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL -}; - - -/********************************************************************* - * - * Function : html_encode - * - * Description : Encodes a string so it's not interpreted as - * containing HTML tags or entities. - * Replaces <, >, &, and " with the appropriate HTML - * entities. - * - * Parameters : - * 1 : s = String to encode. Null-terminated. - * - * Returns : Encoded string, newly allocated on the heap. - * Caller is responsible for freeing it with free(). - * If s is NULL, or on out-of memory, returns NULL. - * - *********************************************************************/ -char * html_encode(const char *s) -{ - char * buf; - size_t buf_size; - - if (s == NULL) - { - return NULL; - } - - /* each input char can expand to at most 6 chars */ - buf_size = (strlen(s) * 6) + 1; - buf = (char *) malloc(buf_size); - - if (buf) - { - char c; - char * p = buf; - while ( (c = *s++) != '\0') - { - const char * replace_with = html_code_map[(unsigned char) c]; - if(replace_with != NULL) - { - const size_t bytes_written = (size_t)(p - buf); - assert(bytes_written < buf_size); - p += strlcpy(p, replace_with, buf_size - bytes_written); - } - else - { - *p++ = c; - } - } - - *p = '\0'; - } - - assert(strlen(buf) < buf_size); - return(buf); -} - - -/********************************************************************* - * - * Function : html_encode_and_free_original - * - * Description : Encodes a string so it's not interpreted as - * containing HTML tags or entities. - * Replaces <, >, &, and " with the appropriate HTML - * entities. Free()s original string. - * If original string is NULL, simply returns NULL. - * - * Parameters : - * 1 : s = String to encode. Null-terminated. - * - * Returns : Encoded string, newly allocated on the heap. - * Caller is responsible for freeing it with free(). - * If s is NULL, or on out-of memory, returns NULL. - * - *********************************************************************/ -char * html_encode_and_free_original(char *s) -{ - char * result; - - if (s == NULL) - { - return NULL; - } - - result = html_encode(s); - free(s); - - return result; -} - - -/********************************************************************* - * - * Function : url_encode - * - * Description : Encodes a string so it can be used in a URL - * query string. Replaces special characters with - * the appropriate %xx codes. - * - * Parameters : - * 1 : s = String to encode. Null-terminated. - * - * Returns : Encoded string, newly allocated on the heap. - * Caller is responsible for freeing it with free(). - * If s is NULL, or on out-of memory, returns NULL. - * - *********************************************************************/ -char * url_encode(const char *s) -{ - char * buf; - size_t buf_size; - - if (s == NULL) - { - return NULL; - } - - /* each input char can expand to at most 3 chars */ - buf_size = (strlen(s) * 3) + 1; - buf = (char *) malloc(buf_size); - - if (buf) - { - char c; - char * p = buf; - while( (c = *s++) != '\0') - { - const char * replace_with = url_code_map[(unsigned char) c]; - if (replace_with != NULL) - { - const size_t bytes_written = (size_t)(p - buf); - assert(bytes_written < buf_size); - p += strlcpy(p, replace_with, buf_size - bytes_written); - } - else - { - *p++ = c; - } - } - - *p = '\0'; - - } - - assert(strlen(buf) < buf_size); - return(buf); -} - - -/********************************************************************* - * - * Function : xdtoi - * - * Description : Converts a single hex digit to an integer. - * - * Parameters : - * 1 : d = in the range of ['0'..'9', 'A'..'F', 'a'..'f'] - * - * Returns : The integer value, or -1 for non-hex characters. - * - *********************************************************************/ -static int xdtoi(const int d) -{ - if ((d >= '0') && (d <= '9')) - { - return(d - '0'); - } - else if ((d >= 'a') && (d <= 'f')) - { - return(d - 'a' + 10); - } - else if ((d >= 'A') && (d <= 'F')) - { - return(d - 'A' + 10); - } - else - { - return(-1); - } -} - - -/********************************************************************* - * - * Function : xtoi - * - * Description : Hex string to integer conversion. - * - * Parameters : - * 1 : s = a 2 digit hex string (e.g. "1f"). Only the - * first two characters will be looked at. - * - * Returns : The integer value, or 0 for non-hex strings. - * - *********************************************************************/ -int xtoi(const char *s) -{ - int d1, d2; - - d1 = xdtoi(*s); - if(d1 >= 0) - { - d2 = xdtoi(*(s+1)); - if(d2 >= 0) - { - return (d1 << 4) + d2; - } - } - - return 0; -} - - -/********************************************************************* - * - * Function : url_decode - * - * Description : Decodes a URL query string, replacing %xx codes - * with their decoded form. - * - * Parameters : - * 1 : s = String to decode. Null-terminated. - * - * Returns : Decoded string, newly allocated on the heap. - * Caller is responsible for freeing it with free(). - * - *********************************************************************/ -char *url_decode(const char * s) -{ - char *buf = malloc(strlen(s) + 1); - char *q = buf; - - if (buf) - { - while (*s) - { - switch (*s) - { - case '+': - s++; - *q++ = ' '; - break; - - case '%': - if ((*q = (char)xtoi(s + 1)) != '\0') - { - s += 3; - q++; - } - else - { - /* malformed, just use it */ - *q++ = *s++; - } - break; - - default: - *q++ = *s++; - break; - } - } - *q = '\0'; - } - - return(buf); - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/encode.h b/external/privoxy/encode.h deleted file mode 100644 index 728746b..0000000 --- a/external/privoxy/encode.h +++ /dev/null @@ -1,94 +0,0 @@ -#ifndef ENCODE_H_INCLUDED -#define ENCODE_H_INCLUDED -#define ENCODE_H_VERSION "$Id: encode.h,v 1.9 2008/05/21 15:38:13 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/encode.h,v $ - * - * Purpose : Functions to encode and decode URLs, and also to - * encode cookies and HTML text. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: encode.h,v $ - * Revision 1.9 2008/05/21 15:38:13 fabiankeil - * Garbage-collect cookie_encode(). - * - * Revision 1.8 2007/08/18 14:34:27 fabiankeil - * Make xtoi() extern so it can be used in pcrs.c. - * - * Revision 1.7 2006/07/18 14:48:45 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.5 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.4 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.3 2002/01/22 23:28:07 jongfoster - * Adding convenience function html_encode_and_free_original() - * Making all functions accept NULL paramaters - in this case, they - * simply return NULL. This allows error-checking to be deferred. - * - * Revision 1.2 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.1.1.1 2001/05/15 13:58:51 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -extern char * html_encode(const char *s); -extern char * url_encode(const char *s); -extern char * url_decode(const char *str); -extern int xtoi(const char *s); -extern char * html_encode_and_free_original(char *s); - -/* Revision control strings from this header and associated .c file */ -extern const char encode_rcs[]; -extern const char encode_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef ENCODE_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/errlog.c b/external/privoxy/errlog.c deleted file mode 100644 index ca12d7f..0000000 --- a/external/privoxy/errlog.c +++ /dev/null @@ -1,1547 +0,0 @@ -const char errlog_rcs[] = "$Id: errlog.c,v 1.92 2009/03/20 03:39:31 ler762 Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/errlog.c,v $ - * - * Purpose : Log errors to a designated destination in an elegant, - * printf-like fashion. - * - * Copyright : Written by and Copyright (C) 2001-2009 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: errlog.c,v $ - * Revision 1.92 2009/03/20 03:39:31 ler762 - * I like having the version logged at startup and the Windows GUI stopped logging - * it after LOG_LEVEL_INFO was removed from - * static int debug = (LOG_LEVEL_FATAL | LOG_LEVEL_ERROR | LOG_LEVEL_INFO); - * - * Revision 1.91 2009/03/18 21:56:30 fabiankeil - * In init_error_log(), suppress the "(Re-)Opening logfile" message if - * we're still logging to stderr. This restores the "silent mode", but - * with LOG_LEVEL_INFO enabled, the show_version() info is written to - * the logfile as intended. - * - * Revision 1.90 2009/03/18 20:43:19 fabiankeil - * Don't enable LOG_LEVEL_INFO by default and don't apply the user's - * debug settings until the logfile has been opened (if there is one). - * Patch submitted by Roland in #2624120. - * - * Revision 1.89 2009/03/07 12:56:12 fabiankeil - * Add log_error() support for unsigned long long (%lld). - * - * Revision 1.88 2009/03/07 11:34:36 fabiankeil - * Omit timestamp and thread id in the mingw32 message box. - * - * Revision 1.87 2009/03/01 18:28:24 fabiankeil - * Help clang understand that we aren't dereferencing - * NULL pointers here. - * - * Revision 1.86 2009/02/09 21:21:15 fabiankeil - * Now that init_log_module() is called earlier, call show_version() - * later on from main() directly so it doesn't get called for --help - * or --version. - * - * Revision 1.85 2009/02/06 17:51:38 fabiankeil - * Be prepared if I break the log module initialization again. - * - * Revision 1.84 2008/12/14 15:46:22 fabiankeil - * Give crunched requests their own log level. - * - * Revision 1.83 2008/12/04 18:14:32 fabiankeil - * Fix some cparser warnings. - * - * Revision 1.82 2008/11/23 16:06:58 fabiankeil - * Update a log message I missed in 1.80. - * - * Revision 1.81 2008/11/23 15:59:27 fabiankeil - * - Update copyright range. - * - Remove stray line breaks in a log message - * nobody is supposed to see anyway. - * - * Revision 1.80 2008/11/23 15:49:49 fabiankeil - * In log_error(), don't surround the thread id with "Privoxy(" and ")". - * - * Revision 1.79 2008/10/20 17:09:25 fabiankeil - * Update init_error_log() description to match reality. - * - * Revision 1.78 2008/09/07 16:59:31 fabiankeil - * Update a comment to reflect that we - * have mutex support on mingw32 now. - * - * Revision 1.77 2008/09/07 12:43:44 fabiankeil - * Move the LogPutString() call in log_error() into the locked - * region so the Windows GUI log is consistent with the logfile. - * - * Revision 1.76 2008/09/07 12:35:05 fabiankeil - * Add mutex lock support for _WIN32. - * - * Revision 1.75 2008/09/04 08:13:58 fabiankeil - * Prepare for critical sections on Windows by adding a - * layer of indirection before the pthread mutex functions. - * - * Revision 1.74 2008/08/06 18:33:36 fabiankeil - * If the "close fd first" workaround doesn't work, - * the fatal error message will be lost, so we better - * explain the consequences while we still can. - * - * Revision 1.73 2008/08/04 19:06:55 fabiankeil - * Add a lame workaround for the "can't open an already open - * logfile on OS/2" problem reported by Maynard in #2028842 - * and describe what a real solution would look like. - * - * Revision 1.72 2008/07/27 12:04:28 fabiankeil - * Fix a comment typo. - * - * Revision 1.71 2008/06/28 17:17:15 fabiankeil - * Remove another stray semicolon. - * - * Revision 1.70 2008/06/28 17:10:29 fabiankeil - * Remove stray semicolon in get_log_timestamp(). - * Reported by Jochen Voss in #2005221. - * - * Revision 1.69 2008/05/30 15:55:25 fabiankeil - * Declare variable "debug" static and complain about its name. - * - * Revision 1.68 2008/04/27 16:50:46 fabiankeil - * Remove an incorrect assertion. The value of debug may change if - * the configuration is reloaded in another thread. While we could - * cache the initial value, the assertion doesn't seem worth it. - * - * Revision 1.67 2008/03/27 18:27:23 fabiankeil - * Remove kill-popups action. - * - * Revision 1.66 2008/01/31 15:38:14 fabiankeil - * - Make the logfp assertion more strict. As of 1.63, the "||" could - * have been an "&&", which means we can use two separate assertions - * and skip on of them on Windows. - * - Break a long commit message line in two. - * - * Revision 1.65 2008/01/31 14:44:33 fabiankeil - * Use (a != b) instead of !(a == b) so the sanity check looks less insane. - * - * Revision 1.64 2008/01/21 18:56:46 david__schmidt - * Swap #def from negative to positive, re-joined it so it didn't - * span an assertion (compilation failure on OS/2) - * - * Revision 1.63 2007/12/15 19:49:32 fabiankeil - * Stop overloading logfile to control the mingw32 log window as well. - * It's no longer necessary now that we disable all debug lines by default - * and at least one user perceived it as a regression (added in 1.55). - * - * Revision 1.62 2007/11/30 15:33:46 fabiankeil - * Unbreak LOG_LEVEL_FATAL. It wasn't fatal with logging disabled - * and on mingw32 fatal log messages didn't end up in the log file. - * - * Revision 1.61 2007/11/04 19:03:01 fabiankeil - * Fix another deadlock Hal spotted and that mysteriously didn't affect FreeBSD. - * - * Revision 1.60 2007/11/03 19:03:31 fabiankeil - * - Prevent the Windows GUI from showing the version two times in a row. - * - Stop using the imperative in the "(Re-)Open logfile" message. - * - Ditch the "Switching to daemon mode" message as the detection - * whether or not we're already in daemon mode doesn't actually work. - * - * Revision 1.59 2007/11/01 12:50:56 fabiankeil - * Here's looking at you, deadlock. - * - * Revision 1.58 2007/10/28 19:04:21 fabiankeil - * Don't mention daemon mode in "Logging disabled" message. Some - * platforms call it differently and it's not really relevant anyway. - * - * Revision 1.57 2007/10/27 13:02:26 fabiankeil - * Relocate daemon-mode-related log messages to make sure - * they aren't shown again in case of configuration reloads. - * - * Revision 1.56 2007/10/14 14:26:56 fabiankeil - * Remove the old log_error() version. - * - * Revision 1.55 2007/10/14 14:12:41 fabiankeil - * When in daemon mode, close stderr after the configuration file has been - * parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436. - * - * Revision 1.54 2007/09/22 16:15:34 fabiankeil - * - Let it compile with pcc. - * - Move our includes below system includes to prevent macro conflicts. - * - * Revision 1.53 2007/08/05 13:53:14 fabiankeil - * #1763173 from Stefan Huehner: declare some more functions - * static and use void instead of empty parameter lists. - * - * Revision 1.52 2007/07/14 07:28:47 fabiankeil - * Add translation function for JB_ERR_FOO codes. - * - * Revision 1.51 2007/05/11 11:51:34 fabiankeil - * Fix a type mismatch warning. - * - * Revision 1.50 2007/04/11 10:55:44 fabiankeil - * Enforce some assertions that could be triggered - * on mingw32 and other systems where we use threads - * but no locks. - * - * Revision 1.49 2007/04/08 16:44:15 fabiankeil - * We need <sys/time.h> for gettimeofday(), not <time.h>. - * - * Revision 1.48 2007/03/31 13:33:28 fabiankeil - * Add alternative log_error() with timestamps - * that contain milliseconds and without using - * strcpy(), strcat() or sprintf(). - * - * Revision 1.47 2006/11/28 15:25:15 fabiankeil - * Only unlink the pidfile if it's actually used. - * - * Revision 1.46 2006/11/13 19:05:51 fabiankeil - * Make pthread mutex locking more generic. Instead of - * checking for OSX and OpenBSD, check for FEATURE_PTHREAD - * and use mutex locking unless there is an _r function - * available. Better safe than sorry. - * - * Fixes "./configure --disable-pthread" and should result - * in less threading-related problems on pthread-using platforms, - * but it still doesn't fix BR#1122404. - * - * Revision 1.45 2006/08/21 11:15:54 david__schmidt - * MS Visual C++ build updates - * - * Revision 1.44 2006/08/18 16:03:16 david__schmidt - * Tweak for OS/2 build happiness. - * - * Revision 1.43 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work: - * http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.42 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.40.2.4 2005/04/03 20:10:50 david__schmidt - * Thanks to Jindrich Makovicka for a race condition fix for the log - * file. The race condition remains for non-pthread implementations. - * Reference patch #1175720. - * - * Revision 1.40.2.3 2003/03/07 03:41:04 david__schmidt - * Wrapping all *_r functions (the non-_r versions of them) with mutex - * semaphores for OSX. Hopefully this will take care of all of those pesky - * crash reports. - * - * Revision 1.40.2.2 2002/09/28 00:30:57 david__schmidt - * Update error logging to give sane values for thread IDs on Mach kernels. - * It's still a hack, but at least it looks farily normal. We print the - * absolute value of the first 4 bytes of the pthread_t modded with 1000. - * - * Revision 1.40.2.1 2002/09/25 12:47:42 oes - * Make log_error safe against NULL string arguments - * - * Revision 1.40 2002/05/22 01:27:27 david__schmidt - * - * Add os2_socket_strerr mirroring w32_socket_strerr. - * - * Revision 1.39 2002/04/03 17:15:27 gliptak - * zero padding thread ids in log - * - * Revision 1.38 2002/03/31 17:18:59 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.37 2002/03/27 14:32:43 david__schmidt - * More compiler warning message maintenance - * - * Revision 1.36 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.35 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.34 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.33 2002/03/13 00:27:04 jongfoster - * Killing warnings - * - * Revision 1.32 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.31 2002/03/06 23:02:57 jongfoster - * Removing tabs - * - * Revision 1.30 2002/03/05 22:43:45 david__schmidt - * - Better error reporting on OS/2 - * - Fix double-slash comment (oops) - * - * Revision 1.29 2002/03/04 23:45:13 jongfoster - * Printing thread ID if using Win32 native threads - * - * Revision 1.28 2002/03/04 17:59:59 oes - * Deleted deletePidFile(), cosmetics - * - * Revision 1.27 2002/03/04 02:08:01 david__schmidt - * Enable web editing of actions file on OS/2 (it had been broken all this time!) - * - * Revision 1.26 2002/01/09 19:05:45 steudten - * Fix big memory leak. - * - * Revision 1.25 2002/01/09 14:32:08 oes - * Added support for gmtime_r and localtime_r. - * - * Revision 1.24 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.23 2001/11/07 00:02:13 steudten - * Add line number in error output for lineparsing for - * actionsfile and configfile. - * Special handling for CLF added. - * - * Revision 1.22 2001/11/05 23:43:05 steudten - * Add time+date to log files. - * - * Revision 1.21 2001/10/25 03:40:47 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.20 2001/09/16 23:04:34 jongfoster - * Fixing a warning - * - * Revision 1.19 2001/09/13 20:08:06 jongfoster - * Adding support for LOG_LEVEL_CGI - * - * Revision 1.18 2001/09/10 11:27:24 oes - * Declaration of w32_socket_strerr now conditional - * - * Revision 1.17 2001/09/10 10:17:13 oes - * Removed unused variable; Fixed sprintf format - * - * Revision 1.16 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.15 2001/07/29 17:41:10 jongfoster - * Now prints thread ID for each message (pthreads only) - * - * Revision 1.14 2001/07/19 19:03:48 haroon - * - Added case for LOG_LEVEL_POPUPS - * - * Revision 1.13 2001/07/13 13:58:58 oes - * - Added case for LOG_LEVEL_DEANIMATE - * - Removed all #ifdef PCRS - * - * Revision 1.12 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.11 2001/06/01 18:14:49 jongfoster - * Changing the calls to strerr() to check HAVE_STRERR (which is defined - * in config.h if appropriate) rather than the NO_STRERR macro. - * - * Revision 1.10 2001/05/29 11:52:21 oes - * Conditional compilation of w32_socket_error - * - * Revision 1.9 2001/05/28 16:15:17 jongfoster - * Improved reporting of errors under Win32. - * - * Revision 1.8 2001/05/26 17:25:14 jongfoster - * Added support for CLF (Common Log Format) and fixed LOG_LEVEL_LOG - * - * Revision 1.7 2001/05/26 15:21:28 jongfoster - * Activity animation in Win32 GUI now works even if debug==0 - * - * Revision 1.6 2001/05/25 21:55:08 jongfoster - * Now cleans up properly on FATAL (removes taskbar icon etc) - * - * Revision 1.5 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.4 2001/05/21 19:32:54 jongfoster - * Added another #ifdef _WIN_CONSOLE - * - * Revision 1.3 2001/05/20 01:11:40 jongfoster - * Added support for LOG_LEVEL_FATAL - * Renamed LOG_LEVEL_FRC to LOG_LEVEL_FORCE, - * and LOG_LEVEL_REF to LOG_LEVEL_RE_FILTER - * - * Revision 1.2 2001/05/17 22:42:01 oes - * - Cleaned CRLF's from the sources and related files - * - Repaired logging for REF and FRC - * - * Revision 1.1.1.1 2001/05/15 13:58:51 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include <stdlib.h> -#include <stdio.h> -#include <stdarg.h> -#include <string.h> - -#include "config.h" -#include "miscutil.h" - -/* For gettimeofday() */ -#include <sys/time.h> - -#if !defined(_WIN32) && !defined(__OS2__) -#include <unistd.h> -#endif /* !defined(_WIN32) && !defined(__OS2__) */ - -#include <errno.h> -#include <assert.h> - -#ifdef _WIN32 -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> -#ifndef _WIN_CONSOLE -#include "w32log.h" -#endif /* ndef _WIN_CONSOLE */ -#endif /* def _WIN32 */ -#ifdef _MSC_VER -#define inline __inline -#endif /* def _MSC_VER */ - -#ifdef __OS2__ -#include <sys/socket.h> /* For sock_errno */ -#define INCL_DOS -#include <os2.h> -#endif - -#include "errlog.h" -#include "project.h" -#include "jcc.h" - -const char errlog_h_rcs[] = ERRLOG_H_VERSION; - - -/* - * LOG_LEVEL_FATAL cannot be turned off. (There are - * some exceptional situations where we need to get a - * message to the user). - */ -#define LOG_LEVEL_MINIMUM LOG_LEVEL_FATAL - -/* where to log (default: stderr) */ -static FILE *logfp = NULL; - -/* logging detail level. XXX: stupid name. */ -static int debug = (LOG_LEVEL_FATAL | LOG_LEVEL_ERROR); - -/* static functions */ -static void fatal_error(const char * error_message); -#ifdef _WIN32 -static char *w32_socket_strerr(int errcode, char *tmp_buf); -#endif -#ifdef __OS2__ -static char *os2_socket_strerr(int errcode, char *tmp_buf); -#endif - -#ifdef MUTEX_LOCKS_AVAILABLE -static inline void lock_logfile(void) -{ - privoxy_mutex_lock(&log_mutex); -} -static inline void unlock_logfile(void) -{ - privoxy_mutex_unlock(&log_mutex); -} -static inline void lock_loginit(void) -{ - privoxy_mutex_lock(&log_init_mutex); -} -static inline void unlock_loginit(void) -{ - privoxy_mutex_unlock(&log_init_mutex); -} -#else /* ! MUTEX_LOCKS_AVAILABLE */ -/* - * FIXME we need a cross-platform locking mechanism. - * The locking/unlocking functions below should be - * fleshed out for non-pthread implementations. - */ -static inline void lock_logfile() {} -static inline void unlock_logfile() {} -static inline void lock_loginit() {} -static inline void unlock_loginit() {} -#endif - -/********************************************************************* - * - * Function : fatal_error - * - * Description : Displays a fatal error to standard error (or, on - * a WIN32 GUI, to a dialog box), and exits Privoxy - * with status code 1. - * - * Parameters : - * 1 : error_message = The error message to display. - * - * Returns : Does not return. - * - *********************************************************************/ -static void fatal_error(const char *error_message) -{ -#if defined(_WIN32) && !defined(_WIN_CONSOLE) - /* Skip timestamp and thread id for the message box. */ - const char *box_message = strstr(error_message, "Fatal error"); - if (NULL == box_message) - { - /* Shouldn't happen but ... */ - box_message = error_message; - } - MessageBox(g_hwndLogFrame, box_message, "Privoxy Error", - MB_OK | MB_ICONERROR | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST); - - /* Cleanup - remove taskbar icon etc. */ - TermLogWindow(); -#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */ - - if (logfp != NULL) - { - fputs(error_message, logfp); - } - -#if defined(unix) - if (pidfile) - { - unlink(pidfile); - } -#endif /* unix */ - - exit(1); -} - - -/********************************************************************* - * - * Function : show_version - * - * Description : Logs the Privoxy version and the program name. - * - * Parameters : - * 1 : prog_name = The program name. - * - * Returns : Nothing. - * - *********************************************************************/ -void show_version(const char *prog_name) -{ - log_error(LOG_LEVEL_INFO, "Privoxy version " VERSION); - if (prog_name != NULL) - { - log_error(LOG_LEVEL_INFO, "Program name: %s", prog_name); - } -} - - -/********************************************************************* - * - * Function : init_log_module - * - * Description : Initializes the logging module to log to stderr. - * Can only be called while stderr hasn't been closed - * yet and is only supposed to be called once. - * - * Parameters : - * 1 : prog_name = The program name. - * - * Returns : Nothing. - * - *********************************************************************/ -void init_log_module(void) -{ - lock_logfile(); - logfp = stderr; - unlock_logfile(); - set_debug_level(debug); -} - - -/********************************************************************* - * - * Function : set_debug_level - * - * Description : Sets the debug level to the provided value - * plus LOG_LEVEL_MINIMUM. - * - * XXX: we should only use the LOG_LEVEL_MINIMUM - * until the first time the configuration file has - * been parsed. - * - * Parameters : 1: debug_level = The debug level to set. - * - * Returns : Nothing. - * - *********************************************************************/ -void set_debug_level(int debug_level) -{ - debug = debug_level | LOG_LEVEL_MINIMUM; -} - - -/********************************************************************* - * - * Function : disable_logging - * - * Description : Disables logging. - * - * Parameters : None. - * - * Returns : Nothing. - * - *********************************************************************/ -void disable_logging(void) -{ - if (logfp != NULL) - { - log_error(LOG_LEVEL_INFO, - "No logfile configured. Please enable it before reporting any problems."); - lock_logfile(); - fclose(logfp); - logfp = NULL; - unlock_logfile(); - } -} - - -/********************************************************************* - * - * Function : init_error_log - * - * Description : Initializes the logging module to log to a file. - * - * XXX: should be renamed. - * - * Parameters : - * 1 : prog_name = The program name. - * 2 : logfname = The logfile to (re)open. - * - * Returns : N/A - * - *********************************************************************/ -void init_error_log(const char *prog_name, const char *logfname) -{ - FILE *fp; - - assert(NULL != logfname); - - lock_loginit(); - - if ((logfp != NULL) && (logfp != stderr)) - { - log_error(LOG_LEVEL_INFO, "(Re-)Opening logfile \'%s\'", logfname); - } - - /* set the designated log file */ - fp = fopen(logfname, "a"); - if ((NULL == fp) && (logfp != NULL)) - { - /* - * Some platforms (like OS/2) don't allow us to open - * the same file twice, therefore we give it another - * shot after closing the old file descriptor first. - * - * We don't do it right away because it prevents us - * from logging the "can't open logfile" message to - * the old logfile. - * - * XXX: this is a lame workaround and once the next - * release is out we should stop bothering reopening - * the logfile unless we have to. - * - * Currently we reopen it every time the config file - * has been reloaded, but actually we only have to - * reopen it if the file name changed or if the - * configuration reloas was caused by a SIGHUP. - */ - log_error(LOG_LEVEL_INFO, "Failed to reopen logfile: \'%s\'. " - "Retrying after closing the old file descriptor first. If that " - "doesn't work, Privoxy will exit without being able to log a message.", - logfname); - lock_logfile(); - fclose(logfp); - logfp = NULL; - unlock_logfile(); - fp = fopen(logfname, "a"); - } - - if (NULL == fp) - { - log_error(LOG_LEVEL_FATAL, "init_error_log(): can't open logfile: \'%s\'", logfname); - } - - /* set logging to be completely unbuffered */ - setbuf(fp, NULL); - - lock_logfile(); - if (logfp != NULL) - { - fclose(logfp); - } - logfp = fp; - unlock_logfile(); - - show_version(prog_name); - - unlock_loginit(); - -} /* init_error_log */ - - -/********************************************************************* - * - * Function : get_thread_id - * - * Description : Returns a number that is different for each thread. - * - * XXX: Should be moved elsewhere (miscutil.c?) - * - * Parameters : None - * - * Returns : thread_id - * - *********************************************************************/ -static long get_thread_id(void) -{ - long this_thread = 1; /* was: pthread_t this_thread;*/ - -#ifdef __OS2__ - PTIB ptib; - APIRET ulrc; /* XXX: I have no clue what this does */ -#endif /* __OS2__ */ - - /* FIXME get current thread id */ -#ifdef FEATURE_PTHREAD - this_thread = (long)pthread_self(); -#ifdef __MACH__ - /* - * Mac OSX (and perhaps other Mach instances) doesn't have a debuggable - * value at the first 4 bytes of pthread_self()'s return value, a pthread_t. - * pthread_t is supposed to be opaque... but it's fairly random, though, so - * we make it mostly presentable. - */ - this_thread = abs(this_thread % 1000); -#endif /* def __MACH__ */ -#elif defined(_WIN32) - this_thread = GetCurrentThreadId(); -#elif defined(__OS2__) - ulrc = DosGetInfoBlocks(&ptib, NULL); - if (ulrc == 0) - this_thread = ptib -> tib_ptib2 -> tib2_ultid; -#endif /* def FEATURE_PTHREAD */ - - return this_thread; -} - - -/********************************************************************* - * - * Function : get_log_timestamp - * - * Description : Generates the time stamp for the log message prefix. - * - * Parameters : - * 1 : buffer = Storage buffer - * 2 : buffer_size = Size of storage buffer - * - * Returns : Number of written characters or 0 for error. - * - *********************************************************************/ -static inline size_t get_log_timestamp(char *buffer, size_t buffer_size) -{ - size_t length; - time_t now; - struct tm tm_now; - struct timeval tv_now; /* XXX: stupid name */ - long msecs; - int msecs_length = 0; - - gettimeofday(&tv_now, NULL); - msecs = tv_now.tv_usec / 1000; - - time(&now); - -#ifdef HAVE_LOCALTIME_R - tm_now = *localtime_r(&now, &tm_now); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&localtime_mutex); - tm_now = *localtime(&now); - privoxy_mutex_unlock(&localtime_mutex); -#else - tm_now = *localtime(&now); -#endif - - length = strftime(buffer, buffer_size, "%b %d %H:%M:%S", &tm_now); - if (length > (size_t)0) - { - msecs_length = snprintf(buffer+length, buffer_size - length, ".%.3ld", msecs); - } - if (msecs_length > 0) - { - length += (size_t)msecs_length; - } - else - { - length = 0; - } - - return length; -} - - -/********************************************************************* - * - * Function : get_clf_timestamp - * - * Description : Generates a Common Log Format time string. - * - * Parameters : - * 1 : buffer = Storage buffer - * 2 : buffer_size = Size of storage buffer - * - * Returns : Number of written characters or 0 for error. - * - *********************************************************************/ -static inline size_t get_clf_timestamp(char *buffer, size_t buffer_size) -{ - /* - * Complex because not all OSs have tm_gmtoff or - * the %z field in strftime() - */ - time_t now; - struct tm *tm_now; - struct tm gmt; -#ifdef HAVE_LOCALTIME_R - struct tm dummy; -#endif - int days, hrs, mins; - size_t length; - int tz_length = 0; - - time (&now); -#ifdef HAVE_GMTIME_R - gmt = *gmtime_r(&now, &gmt); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&gmtime_mutex); - gmt = *gmtime(&now); - privoxy_mutex_unlock(&gmtime_mutex); -#else - gmt = *gmtime(&now); -#endif -#ifdef HAVE_LOCALTIME_R - tm_now = localtime_r(&now, &dummy); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&localtime_mutex); - tm_now = localtime(&now); - privoxy_mutex_unlock(&localtime_mutex); -#else - tm_now = localtime(&now); -#endif - days = tm_now->tm_yday - gmt.tm_yday; - hrs = ((days < -1 ? 24 : 1 < days ? -24 : days * 24) + tm_now->tm_hour - gmt.tm_hour); - mins = hrs * 60 + tm_now->tm_min - gmt.tm_min; - - length = strftime(buffer, buffer_size, "%d/%b/%Y:%H:%M:%S ", tm_now); - - if (length > (size_t)0) - { - tz_length = snprintf(buffer+length, buffer_size-length, - "%+03d%02d", mins / 60, abs(mins) % 60); - } - if (tz_length > 0) - { - length += (size_t)tz_length; - } - else - { - length = 0; - } - - return length; -} - - -/********************************************************************* - * - * Function : get_log_level_string - * - * Description : Translates a numerical loglevel into a string. - * - * Parameters : - * 1 : loglevel = LOG_LEVEL_FOO - * - * Returns : Log level string. - * - *********************************************************************/ -static inline const char *get_log_level_string(int loglevel) -{ - char *log_level_string = NULL; - - assert(0 < loglevel); - - switch (loglevel) - { - case LOG_LEVEL_ERROR: - log_level_string = "Error"; - break; - case LOG_LEVEL_FATAL: - log_level_string = "Fatal error"; - break; - case LOG_LEVEL_GPC: - log_level_string = "Request"; - break; - case LOG_LEVEL_CONNECT: - log_level_string = "Connect"; - break; - case LOG_LEVEL_LOG: - log_level_string = "Writing"; - break; - case LOG_LEVEL_HEADER: - log_level_string = "Header"; - break; - case LOG_LEVEL_INFO: - log_level_string = "Info"; - break; - case LOG_LEVEL_RE_FILTER: - log_level_string = "Re-Filter"; - break; -#ifdef FEATURE_FORCE_LOAD - case LOG_LEVEL_FORCE: - log_level_string = "Force"; - break; -#endif /* def FEATURE_FORCE_LOAD */ -#ifdef FEATURE_FAST_REDIRECTS - case LOG_LEVEL_REDIRECTS: - log_level_string = "Redirect"; - break; -#endif /* def FEATURE_FAST_REDIRECTS */ - case LOG_LEVEL_DEANIMATE: - log_level_string = "Gif-Deanimate"; - break; - case LOG_LEVEL_CRUNCH: - log_level_string = "Crunch"; - break; - case LOG_LEVEL_CGI: - log_level_string = "CGI"; - break; - default: - log_level_string = "Unknown log level"; - break; - } - assert(NULL != log_level_string); - - return log_level_string; -} - - -/********************************************************************* - * - * Function : log_error - * - * Description : This is the error-reporting and logging function. - * - * Parameters : - * 1 : loglevel = the type of message to be logged - * 2 : fmt = the main string we want logged, printf-like - * 3 : ... = arguments to be inserted in fmt (printf-like). - * - * Returns : N/A - * - *********************************************************************/ -void log_error(int loglevel, const char *fmt, ...) -{ - va_list ap; - char *outbuf = NULL; - static char *outbuf_save = NULL; - char tempbuf[BUFFER_SIZE]; - size_t length = 0; - const char * src = fmt; - long thread_id; - char timestamp[30]; - /* - * XXX: Make this a config option, - * why else do we allocate instead of using - * an array? - */ - size_t log_buffer_size = BUFFER_SIZE; - -#if defined(_WIN32) && !defined(_WIN_CONSOLE) - /* - * Irrespective of debug setting, a GET/POST/CONNECT makes - * the taskbar icon animate. (There is an option to disable - * this but checking that is handled inside LogShowActivity()). - */ - if ((loglevel == LOG_LEVEL_GPC) || (loglevel == LOG_LEVEL_CRUNCH)) - { - LogShowActivity(); - } -#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */ - - /* - * verify that the loglevel applies to current - * settings and that logging is enabled. - * Bail out otherwise. - */ - if ((0 == (loglevel & debug)) -#ifndef _WIN32 - || (logfp == NULL) -#endif - ) - { - if (loglevel == LOG_LEVEL_FATAL) - { - fatal_error("Fatal error. You're not supposed to" - "see this message. Please file a bug report."); - } - return; - } - - thread_id = get_thread_id(); - get_log_timestamp(timestamp, sizeof(timestamp)); - - /* protect the whole function because of the static buffer (outbuf) */ - lock_logfile(); - - if (NULL == outbuf_save) - { - outbuf_save = (char*)zalloc(log_buffer_size + 1); /* +1 for paranoia */ - if (NULL == outbuf_save) - { - snprintf(tempbuf, sizeof(tempbuf), - "%s %08lx Fatal error: Out of memory in log_error().", - timestamp, thread_id); - fatal_error(tempbuf); /* Exit */ - return; - } - } - outbuf = outbuf_save; - - /* - * Memsetting the whole buffer to zero (in theory) - * makes things easier later on. - */ - memset(outbuf, 0, log_buffer_size); - - /* Add prefix for everything but Common Log Format messages */ - if (loglevel != LOG_LEVEL_CLF) - { - length = (size_t)snprintf(outbuf, log_buffer_size, "%s %08lx %s: ", - timestamp, thread_id, get_log_level_string(loglevel)); - } - - /* get ready to scan var. args. */ - va_start(ap, fmt); - - /* build formatted message from fmt and var-args */ - while ((*src) && (length < log_buffer_size-2)) - { - const char *sval = NULL; /* %N string */ - int ival; /* %N string length or an error code */ - unsigned uval; /* %u value */ - long lval; /* %l value */ - unsigned long ulval; /* %ul value */ - char ch; - const char *format_string = tempbuf; - - ch = *src++; - if (ch != '%') - { - outbuf[length++] = ch; - /* - * XXX: Only necessary on platforms where multiple threads - * can write to the buffer at the same time because we - * don't support mutexes (OS/2 for example). - */ - outbuf[length] = '\0'; - continue; - } - outbuf[length] = '\0'; - ch = *src++; - switch (ch) { - case '%': - tempbuf[0] = '%'; - tempbuf[1] = '\0'; - break; - case 'd': - ival = va_arg( ap, int ); - snprintf(tempbuf, sizeof(tempbuf), "%d", ival); - break; - case 'u': - uval = va_arg( ap, unsigned ); - snprintf(tempbuf, sizeof(tempbuf), "%u", uval); - break; - case 'l': - /* this is a modifier that must be followed by u, lu, or d */ - ch = *src++; - if (ch == 'd') - { - lval = va_arg( ap, long ); - snprintf(tempbuf, sizeof(tempbuf), "%ld", lval); - } - else if (ch == 'u') - { - ulval = va_arg( ap, unsigned long ); - snprintf(tempbuf, sizeof(tempbuf), "%lu", ulval); - } - else if ((ch == 'l') && (*src == 'u')) - { - unsigned long long lluval = va_arg(ap, unsigned long long); - snprintf(tempbuf, sizeof(tempbuf), "%llu", lluval); - ch = *src++; - } - else - { - snprintf(tempbuf, sizeof(tempbuf), "Bad format string: \"%s\"", fmt); - loglevel = LOG_LEVEL_FATAL; - } - break; - case 'c': - /* - * Note that char paramaters are converted to int, so we need to - * pass "int" to va_arg. (See K&R, 2nd ed, section A7.3.2, page 202) - */ - tempbuf[0] = (char) va_arg(ap, int); - tempbuf[1] = '\0'; - break; - case 's': - format_string = va_arg(ap, char *); - if (format_string == NULL) - { - format_string = "[null]"; - } - break; - case 'N': - /* - * Non-standard: Print a counted unterminated string. - * Takes 2 parameters: int length, const char * string. - */ - ival = va_arg(ap, int); - sval = va_arg(ap, char *); - if (sval == NULL) - { - format_string = "[null]"; - } - else if (ival <= 0) - { - if (0 == ival) - { - /* That's ok (but stupid) */ - tempbuf[0] = '\0'; - } - else - { - /* - * That's not ok (and even more stupid) - */ - assert(ival >= 0); - format_string = "[counted string lenght < 0]"; - } - } - else if ((size_t)ival >= sizeof(tempbuf)) - { - /* - * String is too long, copy as much as possible. - * It will be further truncated later. - */ - memcpy(tempbuf, sval, sizeof(tempbuf)-1); - tempbuf[sizeof(tempbuf)-1] = '\0'; - } - else - { - memcpy(tempbuf, sval, (size_t) ival); - tempbuf[ival] = '\0'; - } - break; - case 'E': - /* Non-standard: Print error code from errno */ -#ifdef _WIN32 - ival = WSAGetLastError(); - format_string = w32_socket_strerr(ival, tempbuf); -#elif __OS2__ - ival = sock_errno(); - if (ival != 0) - { - format_string = os2_socket_strerr(ival, tempbuf); - } - else - { - ival = errno; - format_string = strerror(ival); - } -#else /* ifndef _WIN32 */ - ival = errno; -#ifdef HAVE_STRERROR - format_string = strerror(ival); -#else /* ifndef HAVE_STRERROR */ - format_string = NULL; -#endif /* ndef HAVE_STRERROR */ - if (sval == NULL) - { - snprintf(tempbuf, sizeof(tempbuf), "(errno = %d)", ival); - } -#endif /* ndef _WIN32 */ - break; - case 'T': - /* Non-standard: Print a Common Log File timestamp */ - get_clf_timestamp(tempbuf, sizeof(tempbuf)); - break; - default: - snprintf(tempbuf, sizeof(tempbuf), "Bad format string: \"%s\"", fmt); - loglevel = LOG_LEVEL_FATAL; - break; - } /* switch( p ) */ - - assert(length < log_buffer_size); - length += strlcpy(outbuf + length, format_string, log_buffer_size - length); - - if (length >= log_buffer_size-2) - { - static char warning[] = "... [too long, truncated]"; - - length = log_buffer_size - sizeof(warning) - 1; - length += strlcpy(outbuf + length, warning, log_buffer_size - length); - assert(length < log_buffer_size); - - break; - } - } /* for( p ... ) */ - - /* done with var. args */ - va_end(ap); - - assert(length < log_buffer_size); - length += strlcpy(outbuf + length, "\n", log_buffer_size - length); - - /* Some sanity checks */ - if ((length >= log_buffer_size) - || (outbuf[log_buffer_size-1] != '\0') - || (outbuf[log_buffer_size] != '\0') - ) - { - /* Repeat as assertions */ - assert(length < log_buffer_size); - assert(outbuf[log_buffer_size-1] == '\0'); - /* - * outbuf's real size is log_buffer_size+1, - * so while this looks like an off-by-one, - * we're only checking our paranoia byte. - */ - assert(outbuf[log_buffer_size] == '\0'); - - snprintf(outbuf, log_buffer_size, - "%s %08lx Fatal error: log_error()'s sanity checks failed." - "length: %d. Exiting.", - timestamp, thread_id, (int)length); - loglevel = LOG_LEVEL_FATAL; - } - -#ifndef _WIN32 - /* - * On Windows this is acceptable in case - * we are logging to the GUI window only. - */ - assert(NULL != logfp); -#endif - - if (loglevel == LOG_LEVEL_FATAL) - { - fatal_error(outbuf_save); - /* Never get here */ - } - if (logfp != NULL) - { - fputs(outbuf_save, logfp); - } - -#if defined(_WIN32) && !defined(_WIN_CONSOLE) - /* Write to display */ - LogPutString(outbuf_save); -#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */ - - unlock_logfile(); - -} - - -/********************************************************************* - * - * Function : jb_err_to_string - * - * Description : Translates JB_ERR_FOO codes into strings. - * - * XXX: the type of error codes is jb_err - * but the typedef'inition is currently not - * visible to all files that include errlog.h. - * - * Parameters : - * 1 : error = a valid jb_err code - * - * Returns : A string with the jb_err translation - * - *********************************************************************/ -const char *jb_err_to_string(int error) -{ - switch (error) - { - case JB_ERR_OK: - return "Success, no error"; - case JB_ERR_MEMORY: - return "Out of memory"; - case JB_ERR_CGI_PARAMS: - return "Missing or corrupt CGI parameters"; - case JB_ERR_FILE: - return "Error opening, reading or writing a file"; - case JB_ERR_PARSE: - return "Parse error"; - case JB_ERR_MODIFIED: - return "File has been modified outside of the CGI actions editor."; - case JB_ERR_COMPRESS: - return "(De)compression failure"; - default: - assert(0); - return "Unknown error"; - } - assert(0); - return "Internal error"; -} - -#ifdef _WIN32 -/********************************************************************* - * - * Function : w32_socket_strerr - * - * Description : Translate the return value from WSAGetLastError() - * into a string. - * - * Parameters : - * 1 : errcode = The return value from WSAGetLastError(). - * 2 : tmp_buf = A temporary buffer that might be used to - * store the string. - * - * Returns : String representing the error code. This may be - * a global string constant or a string stored in - * tmp_buf. - * - *********************************************************************/ -static char *w32_socket_strerr(int errcode, char *tmp_buf) -{ -#define TEXT_FOR_ERROR(code,text) \ - if (errcode == code) \ - { \ - return #code " - " text; \ - } - - TEXT_FOR_ERROR(WSAEACCES, "Permission denied") - TEXT_FOR_ERROR(WSAEADDRINUSE, "Address already in use.") - TEXT_FOR_ERROR(WSAEADDRNOTAVAIL, "Cannot assign requested address."); - TEXT_FOR_ERROR(WSAEAFNOSUPPORT, "Address family not supported by protocol family."); - TEXT_FOR_ERROR(WSAEALREADY, "Operation already in progress."); - TEXT_FOR_ERROR(WSAECONNABORTED, "Software caused connection abort."); - TEXT_FOR_ERROR(WSAECONNREFUSED, "Connection refused."); - TEXT_FOR_ERROR(WSAECONNRESET, "Connection reset by peer."); - TEXT_FOR_ERROR(WSAEDESTADDRREQ, "Destination address required."); - TEXT_FOR_ERROR(WSAEFAULT, "Bad address."); - TEXT_FOR_ERROR(WSAEHOSTDOWN, "Host is down."); - TEXT_FOR_ERROR(WSAEHOSTUNREACH, "No route to host."); - TEXT_FOR_ERROR(WSAEINPROGRESS, "Operation now in progress."); - TEXT_FOR_ERROR(WSAEINTR, "Interrupted function call."); - TEXT_FOR_ERROR(WSAEINVAL, "Invalid argument."); - TEXT_FOR_ERROR(WSAEISCONN, "Socket is already connected."); - TEXT_FOR_ERROR(WSAEMFILE, "Too many open sockets."); - TEXT_FOR_ERROR(WSAEMSGSIZE, "Message too long."); - TEXT_FOR_ERROR(WSAENETDOWN, "Network is down."); - TEXT_FOR_ERROR(WSAENETRESET, "Network dropped connection on reset."); - TEXT_FOR_ERROR(WSAENETUNREACH, "Network is unreachable."); - TEXT_FOR_ERROR(WSAENOBUFS, "No buffer space available."); - TEXT_FOR_ERROR(WSAENOPROTOOPT, "Bad protocol option."); - TEXT_FOR_ERROR(WSAENOTCONN, "Socket is not connected."); - TEXT_FOR_ERROR(WSAENOTSOCK, "Socket operation on non-socket."); - TEXT_FOR_ERROR(WSAEOPNOTSUPP, "Operation not supported."); - TEXT_FOR_ERROR(WSAEPFNOSUPPORT, "Protocol family not supported."); - TEXT_FOR_ERROR(WSAEPROCLIM, "Too many processes."); - TEXT_FOR_ERROR(WSAEPROTONOSUPPORT, "Protocol not supported."); - TEXT_FOR_ERROR(WSAEPROTOTYPE, "Protocol wrong type for socket."); - TEXT_FOR_ERROR(WSAESHUTDOWN, "Cannot send after socket shutdown."); - TEXT_FOR_ERROR(WSAESOCKTNOSUPPORT, "Socket type not supported."); - TEXT_FOR_ERROR(WSAETIMEDOUT, "Connection timed out."); - TEXT_FOR_ERROR(WSAEWOULDBLOCK, "Resource temporarily unavailable."); - TEXT_FOR_ERROR(WSAHOST_NOT_FOUND, "Host not found."); - TEXT_FOR_ERROR(WSANOTINITIALISED, "Successful WSAStartup not yet performed."); - TEXT_FOR_ERROR(WSANO_DATA, "Valid name, no data record of requested type."); - TEXT_FOR_ERROR(WSANO_RECOVERY, "This is a non-recoverable error."); - TEXT_FOR_ERROR(WSASYSNOTREADY, "Network subsystem is unavailable."); - TEXT_FOR_ERROR(WSATRY_AGAIN, "Non-authoritative host not found."); - TEXT_FOR_ERROR(WSAVERNOTSUPPORTED, "WINSOCK.DLL version out of range."); - TEXT_FOR_ERROR(WSAEDISCON, "Graceful shutdown in progress."); - /* - * The following error codes are documented in the Microsoft WinSock - * reference guide, but don't actually exist. - * - * TEXT_FOR_ERROR(WSA_INVALID_HANDLE, "Specified event object handle is invalid."); - * TEXT_FOR_ERROR(WSA_INVALID_PARAMETER, "One or more parameters are invalid."); - * TEXT_FOR_ERROR(WSAINVALIDPROCTABLE, "Invalid procedure table from service provider."); - * TEXT_FOR_ERROR(WSAINVALIDPROVIDER, "Invalid service provider version number."); - * TEXT_FOR_ERROR(WSA_IO_PENDING, "Overlapped operations will complete later."); - * TEXT_FOR_ERROR(WSA_IO_INCOMPLETE, "Overlapped I/O event object not in signaled state."); - * TEXT_FOR_ERROR(WSA_NOT_ENOUGH_MEMORY, "Insufficient memory available."); - * TEXT_FOR_ERROR(WSAPROVIDERFAILEDINIT, "Unable to initialize a service provider."); - * TEXT_FOR_ERROR(WSASYSCALLFAILURE, "System call failure."); - * TEXT_FOR_ERROR(WSA_OPERATION_ABORTED, "Overlapped operation aborted."); - */ - - sprintf(tmp_buf, "(error number %d)", errcode); - return tmp_buf; -} -#endif /* def _WIN32 */ - - -#ifdef __OS2__ -/********************************************************************* - * - * Function : os2_socket_strerr - * - * Description : Translate the return value from sock_errno() - * into a string. - * - * Parameters : - * 1 : errcode = The return value from sock_errno(). - * 2 : tmp_buf = A temporary buffer that might be used to - * store the string. - * - * Returns : String representing the error code. This may be - * a global string constant or a string stored in - * tmp_buf. - * - *********************************************************************/ -static char *os2_socket_strerr(int errcode, char *tmp_buf) -{ -#define TEXT_FOR_ERROR(code,text) \ - if (errcode == code) \ - { \ - return #code " - " text; \ - } - - TEXT_FOR_ERROR(SOCEPERM , "Not owner.") - TEXT_FOR_ERROR(SOCESRCH , "No such process.") - TEXT_FOR_ERROR(SOCEINTR , "Interrupted system call.") - TEXT_FOR_ERROR(SOCENXIO , "No such device or address.") - TEXT_FOR_ERROR(SOCEBADF , "Bad file number.") - TEXT_FOR_ERROR(SOCEACCES , "Permission denied.") - TEXT_FOR_ERROR(SOCEFAULT , "Bad address.") - TEXT_FOR_ERROR(SOCEINVAL , "Invalid argument.") - TEXT_FOR_ERROR(SOCEMFILE , "Too many open files.") - TEXT_FOR_ERROR(SOCEPIPE , "Broken pipe.") - TEXT_FOR_ERROR(SOCEWOULDBLOCK , "Operation would block.") - TEXT_FOR_ERROR(SOCEINPROGRESS , "Operation now in progress.") - TEXT_FOR_ERROR(SOCEALREADY , "Operation already in progress.") - TEXT_FOR_ERROR(SOCENOTSOCK , "Socket operation on non-socket.") - TEXT_FOR_ERROR(SOCEDESTADDRREQ , "Destination address required.") - TEXT_FOR_ERROR(SOCEMSGSIZE , "Message too long.") - TEXT_FOR_ERROR(SOCEPROTOTYPE , "Protocol wrong type for socket.") - TEXT_FOR_ERROR(SOCENOPROTOOPT , "Protocol not available.") - TEXT_FOR_ERROR(SOCEPROTONOSUPPORT, "Protocol not supported.") - TEXT_FOR_ERROR(SOCESOCKTNOSUPPORT, "Socket type not supported.") - TEXT_FOR_ERROR(SOCEOPNOTSUPP , "Operation not supported.") - TEXT_FOR_ERROR(SOCEPFNOSUPPORT , "Protocol family not supported.") - TEXT_FOR_ERROR(SOCEAFNOSUPPORT , "Address family not supported by protocol family.") - TEXT_FOR_ERROR(SOCEADDRINUSE , "Address already in use.") - TEXT_FOR_ERROR(SOCEADDRNOTAVAIL , "Can't assign requested address.") - TEXT_FOR_ERROR(SOCENETDOWN , "Network is down.") - TEXT_FOR_ERROR(SOCENETUNREACH , "Network is unreachable.") - TEXT_FOR_ERROR(SOCENETRESET , "Network dropped connection on reset.") - TEXT_FOR_ERROR(SOCECONNABORTED , "Software caused connection abort.") - TEXT_FOR_ERROR(SOCECONNRESET , "Connection reset by peer.") - TEXT_FOR_ERROR(SOCENOBUFS , "No buffer space available.") - TEXT_FOR_ERROR(SOCEISCONN , "Socket is already connected.") - TEXT_FOR_ERROR(SOCENOTCONN , "Socket is not connected.") - TEXT_FOR_ERROR(SOCESHUTDOWN , "Can't send after socket shutdown.") - TEXT_FOR_ERROR(SOCETOOMANYREFS , "Too many references: can't splice.") - TEXT_FOR_ERROR(SOCETIMEDOUT , "Operation timed out.") - TEXT_FOR_ERROR(SOCECONNREFUSED , "Connection refused.") - TEXT_FOR_ERROR(SOCELOOP , "Too many levels of symbolic links.") - TEXT_FOR_ERROR(SOCENAMETOOLONG , "File name too long.") - TEXT_FOR_ERROR(SOCEHOSTDOWN , "Host is down.") - TEXT_FOR_ERROR(SOCEHOSTUNREACH , "No route to host.") - TEXT_FOR_ERROR(SOCENOTEMPTY , "Directory not empty.") - TEXT_FOR_ERROR(SOCEOS2ERR , "OS/2 Error.") - - sprintf(tmp_buf, "(error number %d)", errcode); - return tmp_buf; -} -#endif /* def __OS2__ */ - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/errlog.h b/external/privoxy/errlog.h deleted file mode 100644 index 4906331..0000000 --- a/external/privoxy/errlog.h +++ /dev/null @@ -1,215 +0,0 @@ -#ifndef ERRLOG_H_INCLUDED -#define ERRLOG_H_INCLUDED -#define ERRLOG_H_VERSION "$Id: errlog.h,v 1.22 2009/02/09 21:21:15 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/errlog.h,v $ - * - * Purpose : Log errors to a designated destination in an elegant, - * printf-like fashion. - * - * Copyright : Written by and Copyright (C) 2001-2009 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: errlog.h,v $ - * Revision 1.22 2009/02/09 21:21:15 fabiankeil - * Now that init_log_module() is called earlier, call show_version() - * later on from main() directly so it doesn't get called for --help - * or --version. - * - * Revision 1.21 2008/12/14 15:46:22 fabiankeil - * Give crunched requests their own log level. - * - * Revision 1.20 2008/03/27 18:27:23 fabiankeil - * Remove kill-popups action. - * - * Revision 1.19 2007/10/14 14:12:41 fabiankeil - * When in daemon mode, close stderr after the configuration file has been - * parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436. - * - * Revision 1.18 2007/07/14 07:28:47 fabiankeil - * Add translation function for JB_ERR_FOO codes. - * - * Revision 1.17 2007/03/31 13:33:28 fabiankeil - * Add alternative log_error() with timestamps - * that contain milliseconds and without using - * strcpy(), strcat() or sprintf(). - * - * Revision 1.16 2006/11/28 15:29:50 fabiankeil - * Define LOG_LEVEL_REDIRECTS independently of - * FEATURE_FAST_REDIRECTS. It is used by redirect{} - * as well. - * - * Revision 1.15 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.13.2.1 2002/08/05 17:57:06 oes - * Cosmetic change - * - * Revision 1.13 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.12 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.11 2002/03/06 23:02:57 jongfoster - * Removing tabs - * - * Revision 1.10 2001/09/13 20:08:06 jongfoster - * Adding support for LOG_LEVEL_CGI - * - * Revision 1.9 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.8 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.7 2001/07/19 19:02:53 haroon - * Added define for LOG_LEVEL_POPUPS - * - * Revision 1.6 2001/07/13 13:59:22 oes - * - Added LOG_LEVEL_DEANIMATE - * - Changed LOG_LEVEL_CLF - * - Removed all #ifdef PCRS - * - * Revision 1.5 2001/05/26 17:25:14 jongfoster - * Added support for CLF (Common Log Format) and fixed LOG_LEVEL_LOG - * - * Revision 1.4 2001/05/25 21:56:06 jongfoster - * Added FIXME comment to (broken) LOG_LEVEL_LOG - * - * Revision 1.3 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.2 2001/05/20 01:11:40 jongfoster - * Added support for LOG_LEVEL_FATAL - * Renamed LOG_LEVEL_FRC to LOG_LEVEL_FORCE, - * and LOG_LEVEL_REF to LOG_LEVEL_RE_FILTER - * - * Revision 1.1.1.1 2001/05/15 13:58:51 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -/* Debug level for errors */ - -/* XXX: Should be renamed. */ -#define LOG_LEVEL_GPC 0x0001 -#define LOG_LEVEL_CONNECT 0x0002 -#define LOG_LEVEL_IO 0x0004 -#define LOG_LEVEL_HEADER 0x0008 -#define LOG_LEVEL_LOG 0x0010 -#ifdef FEATURE_FORCE_LOAD -#define LOG_LEVEL_FORCE 0x0020 -#endif /* def FEATURE_FORCE_LOAD */ -#define LOG_LEVEL_RE_FILTER 0x0040 -#define LOG_LEVEL_REDIRECTS 0x0080 -#define LOG_LEVEL_DEANIMATE 0x0100 -#define LOG_LEVEL_CLF 0x0200 /* Common Log File format */ -#define LOG_LEVEL_CRUNCH 0x0400 -#define LOG_LEVEL_CGI 0x0800 /* CGI / templates */ - -/* Following are always on: */ -#define LOG_LEVEL_INFO 0x1000 -#define LOG_LEVEL_ERROR 0x2000 -#define LOG_LEVEL_FATAL 0x4000 /* Exits after writing log */ - -extern void init_error_log(const char *prog_name, const char *logfname); -extern void set_debug_level(int debuglevel); -extern void disable_logging(void); -extern void init_log_module(void); -extern void show_version(const char *prog_name); -extern void log_error(int loglevel, const char *fmt, ...); -extern const char *jb_err_to_string(int error); - -/* Revision control strings from this header and associated .c file */ -extern const char errlog_rcs[]; -extern const char errlog_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef ERRLOG_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ - diff --git a/external/privoxy/filters.c b/external/privoxy/filters.c deleted file mode 100644 index 8fa1d4e..0000000 --- a/external/privoxy/filters.c +++ /dev/null @@ -1,2709 +0,0 @@ -const char filters_rcs[] = "$Id: filters.c,v 1.113 2009/03/08 14:19:23 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/filters.c,v $ - * - * Purpose : Declares functions to parse/crunch headers and pages. - * Functions declared include: - * `acl_addr', `add_stats', `block_acl', `block_imageurl', - * `block_url', `url_actions', `domain_split', - * `filter_popups', `forward_url', 'redirect_url', - * `ij_untrusted_url', `intercept_url', `pcrs_filter_respose', - * `ijb_send_banner', `trust_url', `gif_deanimate_response', - * `execute_single_pcrs_command', `rewrite_url', - * `get_last_url' - * - * Copyright : Written by and Copyright (C) 2001, 2004-2008 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: filters.c,v $ - * Revision 1.113 2009/03/08 14:19:23 fabiankeil - * Fix justified (but harmless) compiler warnings - * on platforms where sizeof(int) < sizeof(long). - * - * Revision 1.112 2009/03/01 18:28:23 fabiankeil - * Help clang understand that we aren't dereferencing - * NULL pointers here. - * - * Revision 1.111 2008/12/04 18:13:46 fabiankeil - * Fix a cparser warning. - * - * Revision 1.110 2008/11/10 16:40:25 fabiankeil - * Fix a gcc44 warning. - * - * Revision 1.109 2008/11/08 15:48:41 fabiankeil - * Mention actual values when complaining about - * the chunk size exceeding the buffer size. - * - * Revision 1.108 2008/05/21 15:35:08 fabiankeil - * - Mark csp as immutable for block_acl(). - * - Remove an obsolete complaint about filter_popups(). - * - * Revision 1.107 2008/05/04 17:52:56 fabiankeil - * Adjust parse_http_url() call to new prototype. - * - * Revision 1.106 2008/05/03 16:40:44 fabiankeil - * Change content_filters_enabled()'s parameter from - * csp->action to action so it can be also used in the - * CGI code. Don't bother checking if there are filters - * loaded, as that's somewhat besides the point. - * - * Revision 1.105 2008/03/28 15:13:39 fabiankeil - * Remove inspect-jpegs action. - * - * Revision 1.104 2008/03/27 18:27:24 fabiankeil - * Remove kill-popups action. - * - * Revision 1.103 2008/03/06 16:33:45 fabiankeil - * If limit-connect isn't used, don't limit CONNECT requests to port 443. - * - * Revision 1.102 2008/03/01 14:00:44 fabiankeil - * Let the block action take the reason for the block - * as argument and show it on the "blocked" page. - * - * Revision 1.101 2008/02/23 16:57:12 fabiankeil - * Rename url_actions() to get_url_actions() and let it - * use the standard parameter ordering. - * - * Revision 1.100 2008/02/23 16:33:43 fabiankeil - * Let forward_url() use the standard parameter ordering - * and mark its second parameter immutable. - * - * Revision 1.99 2008/02/03 13:57:58 fabiankeil - * Add SOCKS5 support for forward-override{}. - * - * Revision 1.98 2008/01/04 17:43:45 fabiankeil - * Improve the warning messages that get logged if the action files - * "enable" filters but no filters of that type have been loaded. - * - * Revision 1.97 2007/11/30 15:37:03 fabiankeil - * Use freez instead of free. - * - * Revision 1.96 2007/10/19 16:53:28 fabiankeil - * Add helper function to check if any content filters are enabled. - * - * Revision 1.95 2007/10/17 19:31:20 fabiankeil - * Omitting the zero chunk that ends the chunk transfer encoding seems - * to be the new black. Log the problem and continue filtering anyway. - * - * Revision 1.94 2007/09/29 13:20:20 fabiankeil - * Remove two redundant and one useless log messages. - * - * Revision 1.93 2007/09/29 10:21:16 fabiankeil - * - Move get_filter_function() from jcc.c to filters.c - * so the filter functions can be static. - * - Don't bother filtering body-less responses. - * - * Revision 1.92 2007/09/28 16:38:55 fabiankeil - * - Execute content filters through execute_content_filter(). - * - Add prepare_for_filtering() so filter functions don't have to - * care about de-chunking and decompression. As a side effect this enables - * decompression for gif_deanimate_response() and jpeg_inspect_response(). - * - Change remove_chunked_transfer_coding()'s return type to jb_err. - * Some clowns feel like chunking empty responses in which case - * (size == 0) is valid but previously would be interpreted as error. - * - * Revision 1.91 2007/09/02 15:31:20 fabiankeil - * Move match_portlist() from filter.c to urlmatch.c. - * It's used for url matching, not for filtering. - * - * Revision 1.90 2007/09/02 12:44:17 fabiankeil - * Remove newline at the end of a log_error() message. - * - * Revision 1.89 2007/08/05 13:42:23 fabiankeil - * #1763173 from Stefan Huehner: declare some more functions static. - * - * Revision 1.88 2007/06/01 16:41:11 fabiankeil - * Add forward-override{} to change the forwarding settings through - * action sections. This is mainly interesting to forward different - * clients differently (for example based on User-Agent or request - * origin). - * - * Revision 1.87 2007/04/30 15:53:10 fabiankeil - * Make sure filters with dynamic jobs actually use them. - * - * Revision 1.86 2007/04/30 15:03:28 fabiankeil - * - Introduce dynamic pcrs jobs that can resolve variables. - * - Don't run redirect functions more than once, - * unless they are activated more than once. - * - * Revision 1.85 2007/03/21 12:24:47 fabiankeil - * - Log the content size after decompression in decompress_iob() - * instead of pcrs_filter_response(). - * - * Revision 1.84 2007/03/20 15:16:34 fabiankeil - * Use dedicated header filter actions instead of abusing "filter". - * Replace "filter-client-headers" and "filter-client-headers" - * with "server-header-filter" and "client-header-filter". - * - * Revision 1.83 2007/03/17 15:20:05 fabiankeil - * New config option: enforce-blocks. - * - * Revision 1.82 2007/03/13 11:28:43 fabiankeil - * - Fix port handling in acl_addr() and use a temporary acl spec - * copy so error messages don't contain a truncated version. - * - Log size of iob before and after decompression. - * - * Revision 1.81 2007/03/05 14:40:53 fabiankeil - * - Cosmetical changes for LOG_LEVEL_RE_FILTER messages. - * - Hide the "Go there anyway" link for blocked CONNECT - * requests where going there anyway doesn't work anyway. - * - * Revision 1.80 2007/02/07 10:55:20 fabiankeil - * - Save the reason for generating http_responses. - * - Block (+block) with status code 403 instead of 404. - * - Use a different kludge to remember a failed decompression. - * - * Revision 1.79 2007/01/31 16:21:38 fabiankeil - * Search for Max-Forwards headers case-insensitive, - * don't generate the "501 unsupported" message for invalid - * Max-Forwards values and don't increase negative ones. - * - * Revision 1.78 2007/01/28 13:41:18 fabiankeil - * - Add HEAD support to finish_http_response. - * - Add error favicon to internal HTML error messages. - * - * Revision 1.77 2007/01/12 15:36:44 fabiankeil - * Mark *csp as immutable for is_untrusted_url() - * and is_imageurl(). Closes FR 1237736. - * - * Revision 1.76 2007/01/01 19:36:37 fabiankeil - * Integrate a modified version of Wil Mahan's - * zlib patch (PR #895531). - * - * Revision 1.75 2006/12/29 18:30:46 fabiankeil - * Fixed gcc43 conversion warnings, - * changed sprintf calls to snprintf. - * - * Revision 1.74 2006/12/24 17:37:38 fabiankeil - * Adjust comment in pcrs_filter_response() - * to recent pcrs changes. Hohoho. - * - * Revision 1.73 2006/12/23 16:01:02 fabiankeil - * Don't crash if pcre returns an error code - * that pcrs didn't expect. Fixes BR 1621173. - * - * Revision 1.72 2006/12/22 18:52:53 fabiankeil - * Modified is_untrusted_url to complain in case of - * write errors and to give a reason when adding new - * entries to the trustfile. Closes FR 1097611. - * - * Revision 1.71 2006/12/22 14:24:52 fabiankeil - * Skip empty filter files in pcrs_filter_response, - * but don't ignore the ones that come afterwards. - * Fixes parts of BR 1619208. - * - * Revision 1.70 2006/12/09 13:33:15 fabiankeil - * Added some sanity checks for get_last_url(). - * Fixed possible segfault caused by my last commit. - * - * Revision 1.69 2006/12/08 12:39:13 fabiankeil - * Let get_last_url() catch https URLs as well. - * - * Revision 1.68 2006/12/05 14:45:48 fabiankeil - * Make sure get_last_url() behaves like advertised - * and fast-redirects{} can be combined with redirect{}. - * - * Revision 1.67 2006/11/28 15:19:43 fabiankeil - * Implemented +redirect{s@foo@bar@} to generate - * a redirect based on a rewritten version of the - * original URL. - * - * Revision 1.66 2006/09/23 13:26:38 roro - * Replace TABs by spaces in source code. - * - * Revision 1.65 2006/09/21 12:54:43 fabiankeil - * Fix +redirect{}. Didn't work with -fast-redirects. - * - * Revision 1.64 2006/08/31 10:55:49 fabiankeil - * Block requests for untrusted URLs with status - * code 403 instead of 200. - * - * Revision 1.63 2006/08/31 10:11:28 fabiankeil - * Don't free p which is still in use and will be later - * freed by free_map(). Don't claim the referrer is unknown - * when the client didn't set one. - * - * Revision 1.62 2006/08/14 00:27:47 david__schmidt - * Feature request 595948: Re-Filter logging in single line - * - * Revision 1.61 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.60 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.58.2.9 2006/01/29 23:10:56 david__schmidt - * Multiple filter file support - * - * Revision 1.58.2.8 2005/05/07 21:50:55 david__schmidt - * A few memory leaks plugged (mostly on error paths) - * - * Revision 1.58.2.7 2004/10/03 12:53:32 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.58.2.6 2003/12/06 22:18:27 gliptak - * Correcting compile problem with FEATURE_IMAGE_BLOCKING - * - * Revision 1.58.2.5 2003/11/11 13:10:31 oes - * Fixed bug #839859: "See why" link URL now gets url-encoded. - * - * Revision 1.58.2.4 2003/02/28 12:52:45 oes - * Fixed a typo - * - * Revision 1.58.2.3 2002/09/25 14:51:51 oes - * Added basic support for OPTIONS and TRACE HTTP methods: - * New function direct_response which handles OPTIONS and - * TRACE requests whose Max-Forwards header field is zero. - * - * Revision 1.58.2.2 2002/08/01 17:18:28 oes - * Fixed BR 537651 / SR 579724 (MSIE image detect improper for IE/Mac) - * - * Revision 1.58.2.1 2002/07/26 15:18:53 oes - * - Bugfix: Executing a filters without jobs no longer results in - * turing off *all* filters. - * - Security fix: Malicious web servers can't cause a seg fault - * through bogus chunk sizes anymore - * - * Revision 1.58 2002/04/24 02:11:17 oes - * Jon's multiple AF patch: url_actions now evaluates rules - * from all AFs. - * - * Revision 1.57 2002/04/08 20:38:34 swa - * fixed JB spelling - * - * Revision 1.56 2002/04/05 15:51:24 oes - * - bugfix: error-pages now get correct request protocol - * - fix for invalid HTML in trust info - * - * Revision 1.55 2002/04/02 16:13:51 oes - * Fix: No "Go there anyway" for SSL - * - * Revision 1.54 2002/04/02 14:55:56 oes - * Bugfix: is_untrusted_url() now depends on FEATURE_TRUST, not FEATURE_COOKIE_JAR - * - * Revision 1.53 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.52 2002/03/24 16:35:57 jongfoster - * Removing logo - * - * Revision 1.51 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.50 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.49 2002/03/16 20:29:14 oes - * Cosmetics - * - * Revision 1.48 2002/03/13 20:25:34 oes - * Better logging for content filters - * - * Revision 1.47 2002/03/13 00:30:52 jongfoster - * Killing warnings - * Added option of always sending redirect for imageblock, - * currently disabled with #if 0. - * - * Revision 1.46 2002/03/12 01:42:49 oes - * Introduced modular filters - * - * Revision 1.45 2002/03/08 16:47:50 oes - * Added choice beween GIF and PNG built-in images - * - * Revision 1.44 2002/03/07 03:49:31 oes - * - Fixed compiler warnings etc - * - Changed built-in images from GIF to PNG - * (with regard to Unisys patent issue) - * - Added a 4x4 pattern PNG which is less intrusive - * than the logo but also clearly marks the deleted banners - * - * Revision 1.43 2002/01/22 23:51:59 jongfoster - * Replacing strsav() with the safer string_append(). - * - * Adding missing html_encode() to error message generators. Where encoded - * and unencoded versions of a string were provided, removing the unencoded - * one. - * - * Revision 1.42 2002/01/17 21:00:32 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Using a single, simple url_match(pattern,url) function - rather than - * the 3-line match routine which was repeated all over the place. - * - * Renaming free_url to free_url_spec, since it frees a struct url_spec. - * - * Using parse_http_url() to parse URLs without faking a HTTP - * request line for parse_http_request(). - * - * Revision 1.41 2001/11/13 00:14:07 jongfoster - * Fixing stupid bug now I've figured out what || means. - * (It always returns 0 or 1, not one of it's paramaters.) - * - * Revision 1.40 2001/10/26 17:37:55 oes - * - Re-enabled Netscape 200/404 bug workaround in block_url(): - * - Removed OS/2 special case - * - Made block_url() independant from sed() having been run - * - Made trust_url independant from sed() having been run - * - Made is_imageurl independant from sed() having been run. - * It now checks User-Agent: and Accept: by itself. - * - * - * Revision 1.39 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.38 2001/10/23 21:32:33 jongfoster - * Adding error-checking to selected functions - * - * Revision 1.37 2001/10/22 15:33:56 david__schmidt - * Special-cased OS/2 out of the Netscape-abort-on-404-in-js problem in - * filters.c. Added a FIXME in front of the offending code. I'll gladly - * put in a better/more robust fix for all parties if one is presented... - * It seems that just returning 200 instead of 404 would pretty much fix - * it for everyone, but I don't know all the history of the problem. - * - * Revision 1.36 2001/10/10 16:44:16 oes - * Added match_portlist function - * - * Revision 1.35 2001/10/07 15:41:23 oes - * Replaced 6 boolean members of csp with one bitmap (csp->flags) - * - * New function remove_chunked_transfer_coding that strips chunked - * transfer coding to plain and is called by pcrs_filter_response - * and gif_deanimate_response if neccessary - * - * Improved handling of zero-change re_filter runs - * - * pcrs_filter_response and gif_deanimate_response now remove - * chunked transfer codeing before processing the body. - * - * Revision 1.34 2001/09/20 15:49:36 steudten - * - * Fix BUG: Change int size to size_t size in pcrs_filter_response(). - * See cgi.c fill_template(). - * - * Revision 1.33 2001/09/16 17:05:14 jongfoster - * Removing unused #include showarg.h - * - * Revision 1.32 2001/09/16 13:21:27 jongfoster - * Changes to use new list functions. - * - * Revision 1.31 2001/09/16 11:38:02 jongfoster - * Splitting fill_template() into 2 functions: - * template_load() loads the file - * template_fill() performs the PCRS regexps. - * This is because the CGI edit interface has a "table row" - * template which is used many times in the page - this - * change means it's only loaded from disk once. - * - * Revision 1.30 2001/09/16 11:00:10 jongfoster - * New function alloc_http_response, for symmetry with free_http_response - * - * Revision 1.29 2001/09/13 23:32:40 jongfoster - * Moving image data to cgi.c rather than cgi.h - * Fixing a GPF under Win32 (and any other OS that protects global - * constants from being written to). - * - * Revision 1.28 2001/09/10 10:18:51 oes - * Silenced compiler warnings - * - * Revision 1.27 2001/08/05 16:06:20 jongfoster - * Modifiying "struct map" so that there are now separate header and - * "map_entry" structures. This means that functions which modify a - * map no longer need to return a pointer to the modified map. - * Also, it no longer reverses the order of the entries (which may be - * important with some advanced template substitutions). - * - * Revision 1.26 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.25 2001/07/26 10:09:46 oes - * Made browser detection a little less naive - * - * Revision 1.24 2001/07/25 17:22:51 oes - * Added workaround for Netscape bug that prevents display of page when loading a component fails. - * - * Revision 1.23 2001/07/23 13:40:12 oes - * Fixed bug that caused document body to be dropped when pcrs joblist was empty. - * - * Revision 1.22 2001/07/18 12:29:34 oes - * - Made gif_deanimate_response respect - * csp->action->string[ACTION_STRING_DEANIMATE] - * - Logging cosmetics - * - * Revision 1.21 2001/07/13 13:59:53 oes - * - Introduced gif_deanimate_response which shares the - * generic content modification interface of pcrs_filter_response - * and acts as a wrapper to deanimate.c:gif_deanimate() - * - Renamed re_process_buffer to pcrs_filter_response - * - pcrs_filter_response now returns NULL on failiure - * - Removed all #ifdef PCRS - * - * Revision 1.20 2001/07/01 17:01:04 oes - * Added comments and missing return statement in is_untrusted_url() - * - * Revision 1.19 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.18 2001/06/29 13:27:38 oes - * - Cleaned up, renamed and reorderd functions - * and improved comments - * - * - block_url: - * - Ported to CGI platform. Now delivers - * http_response or NULL - * - Unified HTML and GIF generation (moved image detection - * and GIF generation here from jcc.c:chat()) - * - Fixed HTTP status to: - * - 403 (Forbidden) for the "blocked" HTML message - * - 200 (OK) for GIF answers - * - 302 (Redirect) for redirect to GIF - * - * - trust_url: - * - Ported to CGI platform. Now delivers - * http_response or NULL - * - Separated detection of untrusted URL into - * (bool)is_untrusted_url - * - Added enforcement of untrusted requests - * - * - Moved redirect_url() from cgi.c to here - * and ported it to the CGI platform - * - * - Removed logentry from cancelled commit - * - * Revision 1.17 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.16 2001/06/07 23:10:26 jongfoster - * Allowing unanchored domain patterns to back off and retry - * if they partially match. Optimized right-anchored patterns. - * Moving ACL and forward files into config file. - * Replacing struct gateway with struct forward_spec - * - * Revision 1.15 2001/06/03 19:12:00 oes - * extracted-CGI relevant stuff - * - * Revision 1.14 2001/06/01 10:30:55 oes - * Added optional left-anchoring to domaincmp - * - * Revision 1.13 2001/05/31 21:21:30 jongfoster - * Permissionsfile / actions file changes: - * - Changed "permission" to "action" throughout - * - changes to file format to allow string parameters - * - Moved helper functions to actions.c - * - * Revision 1.12 2001/05/31 17:35:20 oes - * - * - Enhanced domain part globbing with infix and prefix asterisk - * matching and optional unanchored operation - * - * Revision 1.11 2001/05/29 11:53:23 oes - * "See why" link added to "blocked" page - * - * Revision 1.10 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.9 2001/05/27 22:17:04 oes - * - * - re_process_buffer no longer writes the modified buffer - * to the client, which was very ugly. It now returns the - * buffer, which it is then written by chat. - * - * - content_length now adjusts the Content-Length: header - * for modified documents rather than crunch()ing it. - * (Length info in csp->content_length, which is 0 for - * unmodified documents) - * - * - For this to work, sed() is called twice when filtering. - * - * Revision 1.8 2001/05/26 17:13:28 jongfoster - * Filled in a function comment. - * - * Revision 1.7 2001/05/26 15:26:15 jongfoster - * ACL feature now provides more security by immediately dropping - * connections from untrusted hosts. - * - * Revision 1.6 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.5 2001/05/25 22:34:30 jongfoster - * Hard tabs->Spaces - * - * Revision 1.4 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.3 2001/05/20 16:44:47 jongfoster - * Removing last hardcoded Junkbusters.com URLs. - * - * Revision 1.2 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.1.1.1 2001/05/15 13:58:52 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <sys/types.h> -#include <stdlib.h> -#include <ctype.h> -#include <string.h> -#include <assert.h> - -#ifndef _WIN32 -#ifndef __OS2__ -#include <unistd.h> -#endif /* ndef __OS2__ */ -#include <netinet/in.h> -#else -#include <winsock2.h> -#endif /* ndef _WIN32 */ - -#ifdef __OS2__ -#include <utils.h> -#endif /* def __OS2__ */ - -#include "project.h" -#include "filters.h" -#include "encode.h" -#include "parsers.h" -#include "ssplit.h" -#include "errlog.h" -#include "jbsockets.h" -#include "miscutil.h" -#include "actions.h" -#include "cgi.h" -#include "list.h" -#include "deanimate.h" -#include "urlmatch.h" -#include "loaders.h" - -#ifdef _WIN32 -#include "win32.h" -#endif - -const char filters_h_rcs[] = FILTERS_H_VERSION; - -/* Fix a problem with Solaris. There should be no effect on other - * platforms. - * Solaris's isspace() is a macro which uses it's argument directly - * as an array index. Therefore we need to make sure that high-bit - * characters generate +ve values, and ideally we also want to make - * the argument match the declared parameter type of "int". - */ -#define ijb_isdigit(__X) isdigit((int)(unsigned char)(__X)) - -static jb_err remove_chunked_transfer_coding(char *buffer, size_t *size); -static jb_err prepare_for_filtering(struct client_state *csp); - -#ifdef FEATURE_ACL -/********************************************************************* - * - * Function : block_acl - * - * Description : Block this request? - * Decide yes or no based on ACL file. - * - * Parameters : - * 1 : dst = The proxy or gateway address this is going to. - * Or NULL to check all possible targets. - * 2 : csp = Current client state (buffers, headers, etc...) - * Also includes the client IP address. - * - * Returns : 0 = FALSE (don't block) and 1 = TRUE (do block) - * - *********************************************************************/ -int block_acl(const struct access_control_addr *dst, const struct client_state *csp) -{ - struct access_control_list *acl = csp->config->acl; - - /* if not using an access control list, then permit the connection */ - if (acl == NULL) - { - return(0); - } - - /* search the list */ - while (acl != NULL) - { - if ((csp->ip_addr_long & acl->src->mask) == acl->src->addr) - { - if (dst == NULL) - { - /* Just want to check if they have any access */ - if (acl->action == ACL_PERMIT) - { - return(0); - } - } - else if ( ((dst->addr & acl->dst->mask) == acl->dst->addr) - && ((dst->port == acl->dst->port) || (acl->dst->port == 0))) - { - if (acl->action == ACL_PERMIT) - { - return(0); - } - else - { - return(1); - } - } - } - acl = acl->next; - } - - return(1); - -} - - -/********************************************************************* - * - * Function : acl_addr - * - * Description : Called from `load_config' to parse an ACL address. - * - * Parameters : - * 1 : aspec = String specifying ACL address. - * 2 : aca = struct access_control_addr to fill in. - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int acl_addr(const char *aspec, struct access_control_addr *aca) -{ - int i, masklength; - long port; - char *p; - char *acl_spec = NULL; - - masklength = 32; - port = 0; - - /* - * Use a temporary acl spec copy so we can log - * the unmodified original in case of parse errors. - */ - acl_spec = strdup(aspec); - if (acl_spec == NULL) - { - /* XXX: This will be logged as parse error. */ - return(-1); - } - - if ((p = strchr(acl_spec, '/')) != NULL) - { - *p++ = '\0'; - if (ijb_isdigit(*p) == 0) - { - freez(acl_spec); - return(-1); - } - masklength = atoi(p); - } - - if ((masklength < 0) || (masklength > 32)) - { - freez(acl_spec); - return(-1); - } - - if ((p = strchr(acl_spec, ':')) != NULL) - { - char *endptr; - - *p++ = '\0'; - port = strtol(p, &endptr, 10); - - if (port <= 0 || port > 65535 || *endptr != '\0') - { - freez(acl_spec); - return(-1); - } - } - - aca->port = (unsigned long)port; - - aca->addr = ntohl(resolve_hostname_to_ip(acl_spec)); - freez(acl_spec); - - if (aca->addr == INADDR_NONE) - { - /* XXX: This will be logged as parse error. */ - return(-1); - } - - /* build the netmask */ - aca->mask = 0; - for (i=1; i <= masklength ; i++) - { - aca->mask |= (1U << (32 - i)); - } - - /* now mask off the host portion of the ip address - * (i.e. save on the network portion of the address). - */ - aca->addr = aca->addr & aca->mask; - - return(0); - -} -#endif /* def FEATURE_ACL */ - - -/********************************************************************* - * - * Function : connect_port_is_forbidden - * - * Description : Check to see if CONNECT requests to the destination - * port of this request are forbidden. The check is - * independend of the actual request method. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : True if yes, false otherwise. - * - *********************************************************************/ -int connect_port_is_forbidden(const struct client_state *csp) -{ - return ((csp->action->flags & ACTION_LIMIT_CONNECT) && - !match_portlist(csp->action->string[ACTION_STRING_LIMIT_CONNECT], - csp->http->port)); -} - - -/********************************************************************* - * - * Function : block_url - * - * Description : Called from `chat'. Check to see if we need to block this. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : NULL => unblocked, else HTTP block response - * - *********************************************************************/ -struct http_response *block_url(struct client_state *csp) -{ - struct http_response *rsp; - const char *new_content_type = NULL; - - /* - * If it's not blocked, don't block it ;-) - */ - if ((csp->action->flags & ACTION_BLOCK) == 0) - { - return NULL; - } - if (csp->action->flags & ACTION_REDIRECT) - { - log_error(LOG_LEVEL_ERROR, "redirect{} overruled by block."); - } - /* - * Else, prepare a response - */ - if (NULL == (rsp = alloc_http_response())) - { - return cgi_error_memory(); - } - - /* - * If it's an image-url, send back an image or redirect - * as specified by the relevant +image action - */ -#ifdef FEATURE_IMAGE_BLOCKING - if (((csp->action->flags & ACTION_IMAGE_BLOCKER) != 0) - && is_imageurl(csp)) - { - char *p; - /* determine HOW images should be blocked */ - p = csp->action->string[ACTION_STRING_IMAGE_BLOCKER]; - - if(csp->action->flags & ACTION_HANDLE_AS_EMPTY_DOCUMENT) - { - log_error(LOG_LEVEL_ERROR, "handle-as-empty-document overruled by handle-as-image."); - } -#if 1 /* Two alternative strategies, use this one for now: */ - - /* and handle accordingly: */ - if ((p == NULL) || (0 == strcmpic(p, "pattern"))) - { - rsp->status = strdup("403 Request blocked by Privoxy"); - if (rsp->status == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->body = bindup(image_pattern_data, image_pattern_length); - if (rsp->body == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->content_length = image_pattern_length; - - if (enlist_unique_header(rsp->headers, "Content-Type", BUILTIN_IMAGE_MIMETYPE)) - { - free_http_response(rsp); - return cgi_error_memory(); - } - } - - else if (0 == strcmpic(p, "blank")) - { - rsp->status = strdup("403 Request blocked by Privoxy"); - if (rsp->status == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->body = bindup(image_blank_data, image_blank_length); - if (rsp->body == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->content_length = image_blank_length; - - if (enlist_unique_header(rsp->headers, "Content-Type", BUILTIN_IMAGE_MIMETYPE)) - { - free_http_response(rsp); - return cgi_error_memory(); - } - } - - else - { - rsp->status = strdup("302 Local Redirect from Privoxy"); - if (rsp->status == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - - if (enlist_unique_header(rsp->headers, "Location", p)) - { - free_http_response(rsp); - return cgi_error_memory(); - } - } - -#else /* Following code is disabled for now */ - - /* and handle accordingly: */ - if ((p == NULL) || (0 == strcmpic(p, "pattern"))) - { - p = CGI_PREFIX "send-banner?type=pattern"; - } - else if (0 == strcmpic(p, "blank")) - { - p = CGI_PREFIX "send-banner?type=blank"; - } - rsp->status = strdup("302 Local Redirect from Privoxy"); - if (rsp->status == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - - if (enlist_unique_header(rsp->headers, "Location", p)) - { - free_http_response(rsp); - return cgi_error_memory(); - } -#endif /* Preceeding code is disabled for now */ - } - else if(csp->action->flags & ACTION_HANDLE_AS_EMPTY_DOCUMENT) - { - /* - * Send empty document. - */ - new_content_type = csp->action->string[ACTION_STRING_CONTENT_TYPE]; - - freez(rsp->body); - rsp->body = strdup(" "); - rsp->content_length = 1; - - rsp->status = strdup("403 Request blocked by Privoxy"); - if (rsp->status == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - if (new_content_type != 0) - { - log_error(LOG_LEVEL_HEADER, "Overwriting Content-Type with %s", new_content_type); - if (enlist_unique_header(rsp->headers, "Content-Type", new_content_type)) - { - free_http_response(rsp); - return cgi_error_memory(); - } - } - } - else -#endif /* def FEATURE_IMAGE_BLOCKING */ - - /* - * Else, generate an HTML "blocked" message: - */ - { - jb_err err; - struct map * exports; - char *p; - - /* - * Workaround for stupid Netscape bug which prevents - * pages from being displayed if loading a referenced - * JavaScript or style sheet fails. So make it appear - * as if it succeeded. - */ - if ( NULL != (p = get_header_value(csp->headers, "User-Agent:")) - && !strncmpic(p, "mozilla", 7) /* Catch Netscape but */ - && !strstr(p, "Gecko") /* save Mozilla, */ - && !strstr(p, "compatible") /* MSIE */ - && !strstr(p, "Opera")) /* and Opera. */ - { - rsp->status = strdup("200 Request for blocked URL"); - } - else - { - rsp->status = strdup("403 Request for blocked URL"); - } - - if (rsp->status == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - - exports = default_exports(csp, NULL); - if (exports == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - -#ifdef FEATURE_FORCE_LOAD - err = map(exports, "force-prefix", 1, FORCE_PREFIX, 1); - /* - * Export the force conditional block killer if - * - * - Privoxy was compiled without FEATURE_FORCE_LOAD, or - * - Privoxy is configured to enforce blocks, or - * - it's a CONNECT request and enforcing wouldn't work anyway. - */ - if ((csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS) - || (0 == strcmpic(csp->http->gpc, "connect"))) -#endif /* ndef FEATURE_FORCE_LOAD */ - { - err = map_block_killer(exports, "force-support"); - } - - if (!err) err = map(exports, "protocol", 1, csp->http->ssl ? "https://" : "http://", 1); - if (!err) err = map(exports, "hostport", 1, html_encode(csp->http->hostport), 0); - if (!err) err = map(exports, "path", 1, html_encode(csp->http->path), 0); - if (!err) err = map(exports, "path-ue", 1, url_encode(csp->http->path), 0); - if (!err) - { - const char *block_reason; - if (csp->action->string[ACTION_STRING_BLOCK] != NULL) - { - block_reason = csp->action->string[ACTION_STRING_BLOCK]; - } - else - { - assert(connect_port_is_forbidden(csp)); - block_reason = "Forbidden CONNECT port."; - } - err = map(exports, "block-reason", 1, html_encode(block_reason), 0); - } - if (err) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - - err = template_fill_for_cgi(csp, "blocked", exports, rsp); - if (err) - { - free_http_response(rsp); - return cgi_error_memory(); - } - } - rsp->reason = RSP_REASON_BLOCKED; - - return finish_http_response(csp, rsp); - -} - - -#ifdef FEATURE_TRUST -/********************************************************************* - * - * Function : trust_url FIXME: I should be called distrust_url - * - * Description : Calls is_untrusted_url to determine if the URL is trusted - * and if not, returns a HTTP 403 response with a reject message. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : NULL => trusted, else http_response. - * - *********************************************************************/ -struct http_response *trust_url(struct client_state *csp) -{ - struct http_response *rsp; - struct map * exports; - char buf[BUFFER_SIZE]; - char *p; - struct url_spec **tl; - struct url_spec *t; - jb_err err; - - /* - * Don't bother to work on trusted URLs - */ - if (!is_untrusted_url(csp)) - { - return NULL; - } - - /* - * Else, prepare a response: - */ - if (NULL == (rsp = alloc_http_response())) - { - return cgi_error_memory(); - } - - rsp->status = strdup("403 Request blocked by Privoxy"); - exports = default_exports(csp, NULL); - if (exports == NULL || rsp->status == NULL) - { - free_http_response(rsp); - return cgi_error_memory(); - } - - /* - * Export the protocol, host, port, and referrer information - */ - err = map(exports, "hostport", 1, csp->http->hostport, 1); - if (!err) err = map(exports, "protocol", 1, csp->http->ssl ? "https://" : "http://", 1); - if (!err) err = map(exports, "path", 1, csp->http->path, 1); - - if (NULL != (p = get_header_value(csp->headers, "Referer:"))) - { - if (!err) err = map(exports, "referrer", 1, html_encode(p), 0); - } - else - { - if (!err) err = map(exports, "referrer", 1, "none set", 1); - } - - if (err) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - - /* - * Export the trust list - */ - p = strdup(""); - for (tl = csp->config->trust_list; (t = *tl) != NULL ; tl++) - { - snprintf(buf, sizeof(buf), "<li>%s</li>\n", t->spec); - string_append(&p, buf); - } - err = map(exports, "trusted-referrers", 1, p, 0); - - if (err) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - - /* - * Export the trust info, if available - */ - if (csp->config->trust_info->first) - { - struct list_entry *l; - - p = strdup(""); - for (l = csp->config->trust_info->first; l ; l = l->next) - { - snprintf(buf, sizeof(buf), "<li> <a href=\"%s\">%s</a><br>\n", l->str, l->str); - string_append(&p, buf); - } - err = map(exports, "trust-info", 1, p, 0); - } - else - { - err = map_block_killer(exports, "have-trust-info"); - } - - if (err) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - - /* - * Export the force conditional block killer if - * - * - Privoxy was compiled without FEATURE_FORCE_LOAD, or - * - Privoxy is configured to enforce blocks, or - * - it's a CONNECT request and enforcing wouldn't work anyway. - */ -#ifdef FEATURE_FORCE_LOAD - if ((csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS) - || (0 == strcmpic(csp->http->gpc, "connect"))) - { - err = map_block_killer(exports, "force-support"); - } - else - { - err = map(exports, "force-prefix", 1, FORCE_PREFIX, 1); - } -#else /* ifndef FEATURE_FORCE_LOAD */ - err = map_block_killer(exports, "force-support"); -#endif /* ndef FEATURE_FORCE_LOAD */ - - if (err) - { - free_map(exports); - free_http_response(rsp); - return cgi_error_memory(); - } - - /* - * Build the response - */ - err = template_fill_for_cgi(csp, "untrusted", exports, rsp); - if (err) - { - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->reason = RSP_REASON_UNTRUSTED; - - return finish_http_response(csp, rsp); -} -#endif /* def FEATURE_TRUST */ - - -/********************************************************************* - * - * Function : compile_dynamic_pcrs_job_list - * - * Description : Compiles a dynamic pcrs job list (one with variables - * resolved at request time) - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : b = The filter list to compile - * - * Returns : NULL in case of errors, otherwise the - * pcrs job list. - * - *********************************************************************/ -pcrs_job *compile_dynamic_pcrs_job_list(const struct client_state *csp, const struct re_filterfile_spec *b) -{ - struct list_entry *pattern; - pcrs_job *job_list = NULL; - pcrs_job *dummy = NULL; - pcrs_job *lastjob = NULL; - int error = 0; - - const struct pcrs_variable variables[] = - { - {"url", csp->http->url, 1}, - {"path", csp->http->path, 1}, - {"host", csp->http->host, 1}, - {"origin", csp->ip_addr_str, 1}, - {NULL, NULL, 1} - }; - - for (pattern = b->patterns->first; pattern != NULL; pattern = pattern->next) - { - assert(pattern->str != NULL); - - dummy = pcrs_compile_dynamic_command(pattern->str, variables, &error); - if (NULL == dummy) - { - assert(error < 0); - log_error(LOG_LEVEL_ERROR, - "Adding filter job \'%s\' to dynamic filter %s failed: %s", - pattern->str, b->name, pcrs_strerror(error)); - continue; - } - else - { - if (error == PCRS_WARN_TRUNCATION) - { - log_error(LOG_LEVEL_ERROR, - "At least one of the variables in \'%s\' had to " - "be truncated before compilation", pattern->str); - } - if (job_list == NULL) - { - job_list = dummy; - } - else - { - lastjob->next = dummy; - } - lastjob = dummy; - } - } - - return job_list; -} - - -/********************************************************************* - * - * Function : rewrite_url - * - * Description : Rewrites a URL with a single pcrs command - * and returns the result if it differs from the - * original and isn't obviously invalid. - * - * Parameters : - * 1 : old_url = URL to rewrite. - * 2 : pcrs_command = pcrs command formatted as string (s@foo@bar@) - * - * - * Returns : NULL if the pcrs_command didn't change the url, or - * the result of the modification. - * - *********************************************************************/ -char *rewrite_url(char *old_url, const char *pcrs_command) -{ - char *new_url = NULL; - int hits; - - assert(old_url); - assert(pcrs_command); - - new_url = pcrs_execute_single_command(old_url, pcrs_command, &hits); - - if (hits == 0) - { - log_error(LOG_LEVEL_REDIRECTS, - "pcrs command \"%s\" didn't change \"%s\".", - pcrs_command, old_url); - freez(new_url); - } - else if (hits < 0) - { - log_error(LOG_LEVEL_REDIRECTS, - "executing pcrs command \"%s\" to rewrite %s failed: %s", - pcrs_command, old_url, pcrs_strerror(hits)); - freez(new_url); - } - else if (strncmpic(new_url, "http://", 7) && strncmpic(new_url, "https://", 8)) - { - log_error(LOG_LEVEL_ERROR, - "pcrs command \"%s\" changed \"%s\" to \"%s\" (%u hi%s), " - "but the result doesn't look like a valid URL and will be ignored.", - pcrs_command, old_url, new_url, hits, (hits == 1) ? "t" : "ts"); - freez(new_url); - } - else - { - log_error(LOG_LEVEL_REDIRECTS, - "pcrs command \"%s\" changed \"%s\" to \"%s\" (%u hi%s).", - pcrs_command, old_url, new_url, hits, (hits == 1) ? "t" : "ts"); - } - - return new_url; - -} - - -#ifdef FEATURE_FAST_REDIRECTS -/********************************************************************* - * - * Function : get_last_url - * - * Description : Search for the last URL inside a string. - * If the string already is a URL, it will - * be the first URL found. - * - * Parameters : - * 1 : subject = the string to check - * 2 : redirect_mode = +fast-redirect{} mode - * - * Returns : NULL if no URL was found, or - * the last URL found. - * - *********************************************************************/ -char *get_last_url(char *subject, const char *redirect_mode) -{ - char *new_url = NULL; - char *tmp; - - assert(subject); - assert(redirect_mode); - - subject = strdup(subject); - if (subject == NULL) - { - log_error(LOG_LEVEL_ERROR, "Out of memory while searching for redirects."); - return NULL; - } - - if (0 == strcmpic(redirect_mode, "check-decoded-url")) - { - log_error(LOG_LEVEL_REDIRECTS, "Decoding \"%s\" if necessary.", subject); - new_url = url_decode(subject); - if (new_url != NULL) - { - freez(subject); - subject = new_url; - } - else - { - log_error(LOG_LEVEL_ERROR, "Unable to decode \"%s\".", subject); - } - } - - log_error(LOG_LEVEL_REDIRECTS, "Checking \"%s\" for redirects.", subject); - - /* - * Find the last URL encoded in the request - */ - tmp = subject; - while ((tmp = strstr(tmp, "http://")) != NULL) - { - new_url = tmp++; - } - tmp = (new_url != NULL) ? new_url : subject; - while ((tmp = strstr(tmp, "https://")) != NULL) - { - new_url = tmp++; - } - - if ((new_url != NULL) - && ( (new_url != subject) - || (0 == strncmpic(subject, "http://", 7)) - || (0 == strncmpic(subject, "https://", 8)) - )) - { - /* - * Return new URL if we found a redirect - * or if the subject already was a URL. - * - * The second case makes sure that we can - * chain get_last_url after another redirection check - * (like rewrite_url) without losing earlier redirects. - */ - new_url = strdup(new_url); - freez(subject); - return new_url; - } - - freez(subject); - return NULL; - -} -#endif /* def FEATURE_FAST_REDIRECTS */ - - -/********************************************************************* - * - * Function : redirect_url - * - * Description : Checks if Privoxy should answer the request with - * a HTTP redirect and generates the redirect if - * necessary. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : NULL if the request can pass, HTTP redirect otherwise. - * - *********************************************************************/ -struct http_response *redirect_url(struct client_state *csp) -{ - struct http_response *rsp; -#ifdef FEATURE_FAST_REDIRECTS - /* - * XXX: Do we still need FEATURE_FAST_REDIRECTS - * as compile-time option? The user can easily disable - * it in his action file. - */ - char * redirect_mode; -#endif /* def FEATURE_FAST_REDIRECTS */ - char *old_url = NULL; - char *new_url = NULL; - char *redirection_string; - - if ((csp->action->flags & ACTION_REDIRECT)) - { - redirection_string = csp->action->string[ACTION_STRING_REDIRECT]; - - /* - * If the redirection string begins with 's', - * assume it's a pcrs command, otherwise treat it as - * properly formatted URL and use it for the redirection - * directly. - * - * According to RFC 2616 section 14.30 the URL - * has to be absolute and if the user tries: - * +redirect{shit/this/will/be/parsed/as/pcrs_command.html} - * she would get undefined results anyway. - * - */ - - if (*redirection_string == 's') - { - old_url = csp->http->url; - new_url = rewrite_url(old_url, redirection_string); - } - else - { - log_error(LOG_LEVEL_REDIRECTS, - "No pcrs command recognized, assuming that \"%s\" is already properly formatted.", - redirection_string); - new_url = strdup(redirection_string); - } - } - -#ifdef FEATURE_FAST_REDIRECTS - if ((csp->action->flags & ACTION_FAST_REDIRECTS)) - { - redirect_mode = csp->action->string[ACTION_STRING_FAST_REDIRECTS]; - - /* - * If it exists, use the previously rewritten URL as input - * otherwise just use the old path. - */ - old_url = (new_url != NULL) ? new_url : strdup(csp->http->path); - new_url = get_last_url(old_url, redirect_mode); - freez(old_url); - } - - /* - * Disable redirect checkers, so that they - * will be only run more than once if the user - * also enables them through tags. - * - * From a performance point of view - * it doesn't matter, but the duplicated - * log messages are annoying. - */ - csp->action->flags &= ~ACTION_FAST_REDIRECTS; -#endif /* def FEATURE_FAST_REDIRECTS */ - csp->action->flags &= ~ACTION_REDIRECT; - - /* Did any redirect action trigger? */ - if (new_url) - { - if (0 == strcmpic(new_url, csp->http->url)) - { - log_error(LOG_LEVEL_ERROR, - "New URL \"%s\" and old URL \"%s\" are the same. Redirection loop prevented.", - csp->http->url, new_url); - freez(new_url); - } - else - { - log_error(LOG_LEVEL_REDIRECTS, "New URL is: %s", new_url); - - if (NULL == (rsp = alloc_http_response())) - { - freez(new_url); - return cgi_error_memory(); - } - - if ( enlist_unique_header(rsp->headers, "Location", new_url) - || (NULL == (rsp->status = strdup("302 Local Redirect from Privoxy"))) ) - { - freez(new_url); - free_http_response(rsp); - return cgi_error_memory(); - } - rsp->reason = RSP_REASON_REDIRECTED; - freez(new_url); - - return finish_http_response(csp, rsp); - } - } - - /* Only reached if no redirect is required */ - return NULL; - -} - - -#ifdef FEATURE_IMAGE_BLOCKING -/********************************************************************* - * - * Function : is_imageurl - * - * Description : Given a URL, decide whether it is an image or not, - * using either the info from a previous +image action - * or, #ifdef FEATURE_IMAGE_DETECT_MSIE, and the browser - * is MSIE and not on a Mac, tell from the browser's accept - * header. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : True (nonzero) if URL is an image, false (0) - * otherwise - * - *********************************************************************/ -int is_imageurl(const struct client_state *csp) -{ -#ifdef FEATURE_IMAGE_DETECT_MSIE - char *tmp; - - tmp = get_header_value(csp->headers, "User-Agent:"); - if (tmp && strstr(tmp, "MSIE") && !strstr(tmp, "Mac_")) - { - tmp = get_header_value(csp->headers, "Accept:"); - if (tmp && strstr(tmp, "image/gif")) - { - /* Client will accept HTML. If this seems counterintuitive, - * blame Microsoft. - */ - return(0); - } - else - { - return(1); - } - } -#endif /* def FEATURE_IMAGE_DETECT_MSIE */ - - return ((csp->action->flags & ACTION_IMAGE) != 0); - -} -#endif /* def FEATURE_IMAGE_BLOCKING */ - - -#ifdef FEATURE_TRUST -/********************************************************************* - * - * Function : is_untrusted_url - * - * Description : Should we "distrust" this URL (and block it)? - * - * Yes if it matches a line in the trustfile, or if the - * referrer matches a line starting with "+" in the - * trustfile. - * No otherwise. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : 0 => trusted, 1 => untrusted - * - *********************************************************************/ -int is_untrusted_url(const struct client_state *csp) -{ - struct file_list *fl; - struct block_spec *b; - struct url_spec **trusted_url; - struct http_request rhttp[1]; - const char * referer; - jb_err err; - - /* - * If we don't have a trustlist, we trust everybody - */ - if (((fl = csp->tlist) == NULL) || ((b = fl->f) == NULL)) - { - return 0; - } - - memset(rhttp, '\0', sizeof(*rhttp)); - - /* - * Do we trust the request URL itself? - */ - for (b = b->next; b ; b = b->next) - { - if (url_match(b->url, csp->http)) - { - return b->reject; - } - } - - if (NULL == (referer = get_header_value(csp->headers, "Referer:"))) - { - /* no referrer was supplied */ - return 1; - } - - - /* - * If not, do we maybe trust its referrer? - */ - err = parse_http_url(referer, rhttp, REQUIRE_PROTOCOL); - if (err) - { - return 1; - } - - for (trusted_url = csp->config->trust_list; *trusted_url != NULL; trusted_url++) - { - if (url_match(*trusted_url, rhttp)) - { - /* if the URL's referrer is from a trusted referrer, then - * add the target spec to the trustfile as an unblocked - * domain and return 0 (which means it's OK). - */ - - FILE *fp; - - if (NULL != (fp = fopen(csp->config->trustfile, "a"))) - { - char * path; - char * path_end; - char * new_entry = strdup("~"); - - string_append(&new_entry, csp->http->hostport); - - path = csp->http->path; - if ( (path[0] == '/') - && (path[1] == '~') - && ((path_end = strchr(path + 2, '/')) != NULL)) - { - /* since this path points into a user's home space - * be sure to include this spec in the trustfile. - */ - long path_len = path_end - path; /* save offset */ - path = strdup(path); /* Copy string */ - if (path != NULL) - { - path_end = path + path_len; /* regenerate ptr to new buffer */ - *(path_end + 1) = '\0'; /* Truncate path after '/' */ - } - string_join(&new_entry, path); - } - - /* - * Give a reason for generating this entry. - */ - string_append(&new_entry, " # Trusted referrer was: "); - string_append(&new_entry, referer); - - if (new_entry != NULL) - { - if (-1 == fprintf(fp, "%s\n", new_entry)) - { - log_error(LOG_LEVEL_ERROR, "Failed to append \'%s\' to trustfile \'%s\': %E", - new_entry, csp->config->trustfile); - } - freez(new_entry); - } - else - { - /* FIXME: No way to handle out-of memory, so mostly ignoring it */ - log_error(LOG_LEVEL_ERROR, "Out of memory adding pattern to trust file"); - } - - fclose(fp); - } - else - { - log_error(LOG_LEVEL_ERROR, "Failed to append new entry for \'%s\' to trustfile \'%s\': %E", - csp->http->hostport, csp->config->trustfile); - } - return 0; - } - } - - return 1; -} -#endif /* def FEATURE_TRUST */ - - -/********************************************************************* - * - * Function : pcrs_filter_response - * - * Description : Execute all text substitutions from all applying - * +filter actions on the text buffer that's been - * accumulated in csp->iob->buf. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : a pointer to the (newly allocated) modified buffer. - * or NULL if there were no hits or something went wrong - * - *********************************************************************/ -static char *pcrs_filter_response(struct client_state *csp) -{ - int hits=0; - size_t size, prev_size; - - char *old = NULL; - char *new = NULL; - pcrs_job *job; - - struct file_list *fl; - struct re_filterfile_spec *b; - struct list_entry *filtername; - - int i, found_filters = 0; - - /* - * Sanity first - */ - if (csp->iob->cur >= csp->iob->eod) - { - return(NULL); - } - - /* - * Need to check the set of re_filterfiles... - */ - for (i = 0; i < MAX_AF_FILES; i++) - { - fl = csp->rlist[i]; - if (NULL != fl) - { - if (NULL != fl->f) - { - found_filters = 1; - break; - } - } - } - - if (0 == found_filters) - { - log_error(LOG_LEVEL_ERROR, "Inconsistent configuration: " - "content filtering enabled, but no content filters available."); - return(NULL); - } - - size = (size_t)(csp->iob->eod - csp->iob->cur); - old = csp->iob->cur; - - for (i = 0; i < MAX_AF_FILES; i++) - { - fl = csp->rlist[i]; - if ((NULL == fl) || (NULL == fl->f)) - { - /* - * Either there are no filter files - * left, or this filter file just - * contains no valid filters. - * - * Continue to be sure we don't miss - * valid filter files that are chained - * after empty or invalid ones. - */ - continue; - } - /* - * For all applying +filter actions, look if a filter by that - * name exists and if yes, execute it's pcrs_joblist on the - * buffer. - */ - for (b = fl->f; b; b = b->next) - { - if (b->type != FT_CONTENT_FILTER) - { - /* Skip header filters */ - continue; - } - - for (filtername = csp->action->multi[ACTION_MULTI_FILTER]->first; - filtername ; filtername = filtername->next) - { - if (strcmp(b->name, filtername->str) == 0) - { - int current_hits = 0; /* Number of hits caused by this filter */ - int job_number = 0; /* Which job we're currently executing */ - int job_hits = 0; /* How many hits the current job caused */ - pcrs_job *joblist = b->joblist; - - if (b->dynamic) joblist = compile_dynamic_pcrs_job_list(csp, b); - - if (NULL == joblist) - { - log_error(LOG_LEVEL_RE_FILTER, "Filter %s has empty joblist. Nothing to do.", b->name); - continue; - } - - prev_size = size; - /* Apply all jobs from the joblist */ - for (job = joblist; NULL != job; job = job->next) - { - job_number++; - job_hits = pcrs_execute(job, old, size, &new, &size); - - if (job_hits >= 0) - { - /* - * That went well. Continue filtering - * and use the result of this job as - * input for the next one. - */ - current_hits += job_hits; - if (old != csp->iob->cur) - { - freez(old); - } - old = new; - } - else - { - /* - * This job caused an unexpected error. Inform the user - * and skip the rest of the jobs in this filter. We could - * continue with the next job, but usually the jobs - * depend on each other or are similar enough to - * fail for the same reason. - * - * At the moment our pcrs expects the error codes of pcre 3.4, - * but newer pcre versions can return additional error codes. - * As a result pcrs_strerror()'s error message might be - * "Unknown error ...", therefore we print the numerical value - * as well. - * - * XXX: Is this important enough for LOG_LEVEL_ERROR or - * should we use LOG_LEVEL_RE_FILTER instead? - */ - log_error(LOG_LEVEL_ERROR, "Skipped filter \'%s\' after job number %u: %s (%d)", - b->name, job_number, pcrs_strerror(job_hits), job_hits); - break; - } - } - - if (b->dynamic) pcrs_free_joblist(joblist); - - log_error(LOG_LEVEL_RE_FILTER, - "filtering %s%s (size %d) with \'%s\' produced %d hits (new size %d).", - csp->http->hostport, csp->http->path, prev_size, b->name, current_hits, size); - - hits += current_hits; - } - } - } - } - - /* - * If there were no hits, destroy our copy and let - * chat() use the original in csp->iob - */ - if (!hits) - { - freez(new); - return(NULL); - } - - csp->flags |= CSP_FLAG_MODIFIED; - csp->content_length = size; - IOB_RESET(csp); - - return(new); - -} - - -/********************************************************************* - * - * Function : gif_deanimate_response - * - * Description : Deanimate the GIF image that has been accumulated in - * csp->iob->buf, set csp->content_length to the modified - * size and raise the CSP_FLAG_MODIFIED flag. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : a pointer to the (newly allocated) modified buffer. - * or NULL in case something went wrong. - * - *********************************************************************/ -static char *gif_deanimate_response(struct client_state *csp) -{ - struct binbuffer *in, *out; - char *p; - size_t size; - - size = (size_t)(csp->iob->eod - csp->iob->cur); - - if ( (NULL == (in = (struct binbuffer *)zalloc(sizeof *in ))) - || (NULL == (out = (struct binbuffer *)zalloc(sizeof *out))) ) - { - log_error(LOG_LEVEL_DEANIMATE, "failed! (no mem)"); - return NULL; - } - - in->buffer = csp->iob->cur; - in->size = size; - - if (gif_deanimate(in, out, strncmp("last", csp->action->string[ACTION_STRING_DEANIMATE], 4))) - { - log_error(LOG_LEVEL_DEANIMATE, "failed! (gif parsing)"); - freez(in); - buf_free(out); - return(NULL); - } - else - { - if ((int)size == out->offset) - { - log_error(LOG_LEVEL_DEANIMATE, "GIF not changed."); - } - else - { - log_error(LOG_LEVEL_DEANIMATE, "Success! GIF shrunk from %d bytes to %d.", size, out->offset); - } - csp->content_length = out->offset; - csp->flags |= CSP_FLAG_MODIFIED; - p = out->buffer; - freez(in); - freez(out); - return(p); - } - -} - - -/********************************************************************* - * - * Function : get_filter_function - * - * Description : Decides which content filter function has - * to be applied (if any). - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : The content filter function to run, or - * NULL if no content filter is active - * - *********************************************************************/ -filter_function_ptr get_filter_function(struct client_state *csp) -{ - filter_function_ptr filter_function = NULL; - - /* - * Are we enabling text mode by force? - */ - if (csp->action->flags & ACTION_FORCE_TEXT_MODE) - { - /* - * Do we really have to? - */ - if (csp->content_type & CT_TEXT) - { - log_error(LOG_LEVEL_HEADER, "Text mode is already enabled."); - } - else - { - csp->content_type |= CT_TEXT; - log_error(LOG_LEVEL_HEADER, "Text mode enabled by force. Take cover!"); - } - } - - if (!(csp->content_type & CT_DECLARED)) - { - /* - * The server didn't bother to declare a MIME-Type. - * Assume it's text that can be filtered. - * - * This also regulary happens with 304 responses, - * therefore logging anything here would cause - * too much noise. - */ - csp->content_type |= CT_TEXT; - } - - /* - * Choose the applying filter function based on - * the content type and action settings. - */ - if ((csp->content_type & CT_TEXT) && - (csp->rlist != NULL) && - (!list_is_empty(csp->action->multi[ACTION_MULTI_FILTER]))) - { - filter_function = pcrs_filter_response; - } - else if ((csp->content_type & CT_GIF) && - (csp->action->flags & ACTION_DEANIMATE)) - { - filter_function = gif_deanimate_response; - } - - return filter_function; -} - - -/********************************************************************* - * - * Function : remove_chunked_transfer_coding - * - * Description : In-situ remove the "chunked" transfer coding as defined - * in rfc2616 from a buffer. - * - * Parameters : - * 1 : buffer = Pointer to the text buffer - * 2 : size = In: Number of bytes to be processed, - * Out: Number of bytes after de-chunking. - * (undefined in case of errors) - * - * Returns : JB_ERR_OK for success, - * JB_ERR_PARSE otherwise - * - *********************************************************************/ -static jb_err remove_chunked_transfer_coding(char *buffer, size_t *size) -{ - size_t newsize = 0; - unsigned int chunksize = 0; - char *from_p, *to_p; - - assert(buffer); - from_p = to_p = buffer; - - if (sscanf(buffer, "%x", &chunksize) != 1) - { - log_error(LOG_LEVEL_ERROR, "Invalid first chunksize while stripping \"chunked\" transfer coding"); - return JB_ERR_PARSE; - } - - while (chunksize > 0U) - { - if (NULL == (from_p = strstr(from_p, "\r\n"))) - { - log_error(LOG_LEVEL_ERROR, "Parse error while stripping \"chunked\" transfer coding"); - return JB_ERR_PARSE; - } - - if ((newsize += chunksize) >= *size) - { - log_error(LOG_LEVEL_ERROR, - "Chunk size %d exceeds buffer size %d in \"chunked\" transfer coding", - chunksize, *size); - return JB_ERR_PARSE; - } - from_p += 2; - - memmove(to_p, from_p, (size_t) chunksize); - to_p = buffer + newsize; - from_p += chunksize + 2; - - if (sscanf(from_p, "%x", &chunksize) != 1) - { - log_error(LOG_LEVEL_INFO, "Invalid \"chunked\" transfer encoding detected and ignored."); - break; - } - } - - /* XXX: Should get its own loglevel. */ - log_error(LOG_LEVEL_RE_FILTER, "De-chunking successful. Shrunk from %d to %d", *size, newsize); - - *size = newsize; - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : prepare_for_filtering - * - * Description : If necessary, de-chunks and decompresses - * the content so it can get filterd. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK for success, - * JB_ERR_PARSE otherwise - * - *********************************************************************/ -static jb_err prepare_for_filtering(struct client_state *csp) -{ - jb_err err = JB_ERR_OK; - - /* - * If the body has a "chunked" transfer-encoding, - * get rid of it, adjusting size and iob->eod - */ - if (csp->flags & CSP_FLAG_CHUNKED) - { - size_t size = (size_t)(csp->iob->eod - csp->iob->cur); - - log_error(LOG_LEVEL_RE_FILTER, "Need to de-chunk first"); - err = remove_chunked_transfer_coding(csp->iob->cur, &size); - if (JB_ERR_OK == err) - { - csp->iob->eod = csp->iob->cur + size; - csp->flags |= CSP_FLAG_MODIFIED; - } - else - { - return JB_ERR_PARSE; - } - } - -#ifdef FEATURE_ZLIB - /* - * If the body has a supported transfer-encoding, - * decompress it, adjusting size and iob->eod. - */ - if (csp->content_type & (CT_GZIP|CT_DEFLATE)) - { - if (0 == csp->iob->eod - csp->iob->cur) - { - /* Nothing left after de-chunking. */ - return JB_ERR_OK; - } - - err = decompress_iob(csp); - - if (JB_ERR_OK == err) - { - csp->flags |= CSP_FLAG_MODIFIED; - csp->content_type &= ~CT_TABOO; - } - else - { - /* - * Unset CT_GZIP and CT_DEFLATE to remember not - * to modify the Content-Encoding header later. - */ - csp->content_type &= ~CT_GZIP; - csp->content_type &= ~CT_DEFLATE; - } - } -#endif - - return err; -} - - -/********************************************************************* - * - * Function : execute_content_filter - * - * Description : Executes a given content filter. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : content_filter = The filter function to execute - * - * Returns : Pointer to the modified buffer, or - * NULL if filtering failed or wasn't necessary. - * - *********************************************************************/ -char *execute_content_filter(struct client_state *csp, filter_function_ptr content_filter) -{ - if (0 == csp->iob->eod - csp->iob->cur) - { - /* - * No content (probably status code 301, 302 ...), - * no filtering necessary. - */ - return NULL; - } - - if (JB_ERR_OK != prepare_for_filtering(csp)) - { - /* - * failed to de-chunk or decompress. - */ - return NULL; - } - - if (0 == csp->iob->eod - csp->iob->cur) - { - /* - * Clown alarm: chunked and/or compressed nothing delivered. - */ - return NULL; - } - - return ((*content_filter)(csp)); -} - - -/********************************************************************* - * - * Function : get_url_actions - * - * Description : Gets the actions for this URL. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : http = http_request request for blocked URLs - * - * Returns : N/A - * - *********************************************************************/ -void get_url_actions(struct client_state *csp, struct http_request *http) -{ - struct file_list *fl; - struct url_actions *b; - int i; - - init_current_action(csp->action); - - for (i = 0; i < MAX_AF_FILES; i++) - { - if (((fl = csp->actions_list[i]) == NULL) || ((b = fl->f) == NULL)) - { - return; - } - - apply_url_actions(csp->action, http, b); - } - - return; -} - - -/********************************************************************* - * - * Function : apply_url_actions - * - * Description : Applies a list of URL actions. - * - * Parameters : - * 1 : action = Destination. - * 2 : http = Current URL - * 3 : b = list of URL actions to apply - * - * Returns : N/A - * - *********************************************************************/ -void apply_url_actions(struct current_action_spec *action, - struct http_request *http, - struct url_actions *b) -{ - if (b == NULL) - { - /* Should never happen */ - return; - } - - for (b = b->next; NULL != b; b = b->next) - { - if (url_match(b->url, http)) - { - merge_current_action(action, b->action); - } - } -} - - -/********************************************************************* - * - * Function : get_forward_override_settings - * - * Description : Returns forward settings as specified with the - * forward-override{} action. forward-override accepts - * forward lines similar to the one used in the - * configuration file, but without the URL pattern. - * - * For example: - * - * forward / . - * - * in the configuration file can be replaced with - * the action section: - * - * {+forward-override{forward .}} - * / - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : Pointer to forwarding structure in case of success. - * Invalid syntax is fatal. - * - *********************************************************************/ -const static struct forward_spec *get_forward_override_settings(struct client_state *csp) -{ - const char *forward_override_line = csp->action->string[ACTION_STRING_FORWARD_OVERRIDE]; - char forward_settings[BUFFER_SIZE]; - char *http_parent = NULL; - /* variable names were chosen for consistency reasons. */ - struct forward_spec *fwd = NULL; - int vec_count; - char *vec[3]; - - assert(csp->action->flags & ACTION_FORWARD_OVERRIDE); - /* Should be enforced by load_one_actions_file() */ - assert(strlen(forward_override_line) < sizeof(forward_settings) - 1); - - /* Create a copy ssplit can modify */ - strlcpy(forward_settings, forward_override_line, sizeof(forward_settings)); - - if (NULL != csp->fwd) - { - /* - * XXX: Currently necessary to prevent memory - * leaks when the show-url-info cgi page is visited. - */ - unload_forward_spec(csp->fwd); - } - - /* - * allocate a new forward node, valid only for - * the lifetime of this request. Save its location - * in csp as well, so sweep() can free it later on. - */ - fwd = csp->fwd = zalloc(sizeof(*fwd)); - if (NULL == fwd) - { - log_error(LOG_LEVEL_FATAL, - "can't allocate memory for forward-override{%s}", forward_override_line); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - return NULL; - } - - vec_count = ssplit(forward_settings, " \t", vec, SZ(vec), 1, 1); - if ((vec_count == 2) && !strcasecmp(vec[0], "forward")) - { - fwd->type = SOCKS_NONE; - - /* Parse the parent HTTP proxy host:port */ - http_parent = vec[1]; - - } - else if (vec_count == 3) - { - char *socks_proxy = NULL; - - if (!strcasecmp(vec[0], "forward-socks4")) - { - fwd->type = SOCKS_4; - socks_proxy = vec[1]; - } - else if (!strcasecmp(vec[0], "forward-socks4a")) - { - fwd->type = SOCKS_4A; - socks_proxy = vec[1]; - } - else if (!strcasecmp(vec[0], "forward-socks5")) - { - fwd->type = SOCKS_5; - socks_proxy = vec[1]; - } - - if (NULL != socks_proxy) - { - /* Parse the SOCKS proxy host[:port] */ - fwd->gateway_host = strdup(socks_proxy); - - if (NULL != (socks_proxy = strchr(fwd->gateway_host, ':'))) - { - *socks_proxy++ = '\0'; - fwd->gateway_port = (int)strtol(socks_proxy, NULL, 0); - } - - if (fwd->gateway_port <= 0) - { - fwd->gateway_port = 1080; - } - - http_parent = vec[2]; - } - } - - if (NULL == http_parent) - { - log_error(LOG_LEVEL_FATAL, - "Invalid forward-override syntax in: %s", forward_override_line); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - } - - /* Parse http forwarding settings */ - if (strcmp(http_parent, ".") != 0) - { - fwd->forward_host = strdup(http_parent); - - if (NULL != (http_parent = strchr(fwd->forward_host, ':'))) - { - *http_parent++ = '\0'; - fwd->forward_port = (int)strtol(http_parent, NULL, 0); - } - - if (fwd->forward_port <= 0) - { - fwd->forward_port = 8000; - } - } - - assert (NULL != fwd); - - log_error(LOG_LEVEL_CONNECT, - "Overriding forwarding settings based on \'%s\'", forward_override_line); - - return fwd; -} - - -/********************************************************************* - * - * Function : forward_url - * - * Description : Should we forward this to another proxy? - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : http = http_request request for current URL - * - * Returns : Pointer to forwarding information. - * - *********************************************************************/ -const struct forward_spec *forward_url(struct client_state *csp, - const struct http_request *http) -{ - static const struct forward_spec fwd_default[1] = { FORWARD_SPEC_INITIALIZER }; - struct forward_spec *fwd = csp->config->forward; - - if (csp->action->flags & ACTION_FORWARD_OVERRIDE) - { - return get_forward_override_settings(csp); - } - - if (fwd == NULL) - { - return fwd_default; - } - - while (fwd != NULL) - { - if (url_match(fwd->url, http)) - { - return fwd; - } - fwd = fwd->next; - } - - return fwd_default; -} - - -/********************************************************************* - * - * Function : direct_response - * - * Description : Check if Max-Forwards == 0 for an OPTIONS or TRACE - * request and if so, return a HTTP 501 to the client. - * - * FIXME: I have a stupid name and I should handle the - * requests properly. Still, what we do here is rfc- - * compliant, whereas ignoring or forwarding are not. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : http_response if , NULL if nonmatch or handler fail - * - *********************************************************************/ -struct http_response *direct_response(struct client_state *csp) -{ - struct http_response *rsp; - struct list_entry *p; - - if ((0 == strcmpic(csp->http->gpc, "trace")) - || (0 == strcmpic(csp->http->gpc, "options"))) - { - for (p = csp->headers->first; (p != NULL) ; p = p->next) - { - if (!strncmpic("Max-Forwards:", p->str, 13)) - { - unsigned int max_forwards; - - /* - * If it's a Max-Forwards value of zero, - * we have to intercept the request. - */ - if (1 == sscanf(p->str+12, ": %u", &max_forwards) && max_forwards == 0) - { - /* - * FIXME: We could handle at least TRACE here, - * but that would require a verbatim copy of - * the request which we don't have anymore - */ - log_error(LOG_LEVEL_HEADER, - "Detected header \'%s\' in OPTIONS or TRACE request. Returning 501.", - p->str); - - /* Get mem for response or fail*/ - if (NULL == (rsp = alloc_http_response())) - { - return cgi_error_memory(); - } - - if (NULL == (rsp->status = strdup("501 Not Implemented"))) - { - free_http_response(rsp); - return cgi_error_memory(); - } - - rsp->is_static = 1; - rsp->reason = RSP_REASON_UNSUPPORTED; - - return(finish_http_response(csp, rsp)); - } - } - } - } - return NULL; -} - - -/********************************************************************* - * - * Function : content_filters_enabled - * - * Description : Checks whether there are any content filters - * enabled for the current request. - * - * Parameters : - * 1 : action = Action spec to check. - * - * Returns : TRUE for yes, FALSE otherwise - * - *********************************************************************/ -int content_filters_enabled(const struct current_action_spec *action) -{ - return ((action->flags & ACTION_DEANIMATE) || - !list_is_empty(action->multi[ACTION_MULTI_FILTER])); -} - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/filters.h b/external/privoxy/filters.h deleted file mode 100644 index 66794e1..0000000 --- a/external/privoxy/filters.h +++ /dev/null @@ -1,382 +0,0 @@ -#ifndef FILTERS_H_INCLUDED -#define FILTERS_H_INCLUDED -#define FILTERS_H_VERSION "$Id: filters.h,v 1.36 2008/05/21 15:35:08 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/filters.h,v $ - * - * Purpose : Declares functions to parse/crunch headers and pages. - * Functions declared include: - * `acl_addr', `add_stats', `block_acl', `block_imageurl', - * `block_url', `url_actions', `filter_popups', `forward_url' - * `ij_untrusted_url', `intercept_url', `re_process_buffer', - * `show_proxy_args', and `trust_url' - * - * Copyright : Written by and Copyright (C) 2001, 2004 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: filters.h,v $ - * Revision 1.36 2008/05/21 15:35:08 fabiankeil - * - Mark csp as immutable for block_acl(). - * - Remove an obsolete complaint about filter_popups(). - * - * Revision 1.35 2008/05/03 16:40:45 fabiankeil - * Change content_filters_enabled()'s parameter from - * csp->action to action so it can be also used in the - * CGI code. Don't bother checking if there are filters - * loaded, as that's somewhat besides the point. - * - * Revision 1.34 2008/03/02 12:25:25 fabiankeil - * Also use shiny new connect_port_is_forbidden() in jcc.c. - * - * Revision 1.33 2008/02/23 16:57:12 fabiankeil - * Rename url_actions() to get_url_actions() and let it - * use the standard parameter ordering. - * - * Revision 1.32 2008/02/23 16:33:43 fabiankeil - * Let forward_url() use the standard parameter ordering - * and mark its second parameter immutable. - * - * Revision 1.31 2007/10/19 16:53:28 fabiankeil - * Add helper function to check if any content filters are enabled. - * - * Revision 1.30 2007/09/29 10:21:16 fabiankeil - * - Move get_filter_function() from jcc.c to filters.c - * so the filter functions can be static. - * - Don't bother filtering body-less responses. - * - * Revision 1.29 2007/09/28 16:38:55 fabiankeil - * - Execute content filters through execute_content_filter(). - * - Add prepare_for_filtering() so filter functions don't have to - * care about de-chunking and decompression. As a side effect this enables - * decompression for gif_deanimate_response() and jpeg_inspect_response(). - * - Change remove_chunked_transfer_coding()'s return type to jb_err. - * Some clowns feel like chunking empty responses in which case - * (size == 0) is valid but previously would be interpreted as error. - * - * Revision 1.28 2007/09/02 15:31:20 fabiankeil - * Move match_portlist() from filter.c to urlmatch.c. - * It's used for url matching, not for filtering. - * - * Revision 1.27 2007/04/30 15:02:18 fabiankeil - * Introduce dynamic pcrs jobs that can resolve variables. - * - * Revision 1.26 2007/03/13 11:28:43 fabiankeil - * - Fix port handling in acl_addr() and use a temporary acl spec - * copy so error messages don't contain a truncated version. - * - Log size of iob before and after decompression. - * - * Revision 1.25 2007/01/12 15:36:44 fabiankeil - * Mark *csp as immutable for is_untrusted_url() - * and is_imageurl(). Closes FR 1237736. - * - * Revision 1.24 2006/12/29 18:30:46 fabiankeil - * Fixed gcc43 conversion warnings, - * changed sprintf calls to snprintf. - * - * Revision 1.23 2006/11/28 15:19:43 fabiankeil - * Implemented +redirect{s@foo@bar@} to generate - * a redirect based on a rewritten version of the - * original URL. - * - * Revision 1.22 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.20.2.2 2004/10/03 12:53:32 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.20.2.1 2002/09/25 14:51:51 oes - * Added basic support for OPTIONS and TRACE HTTP methods: - * New function direct_response which handles OPTIONS and - * TRACE requests whose Max-Forwards header field is zero. - * - * Revision 1.20 2002/04/02 14:56:16 oes - * Bugfix: is_untrusted_url() and trust_url() now depend on FEATURE_TRUST, not FEATURE_COOKIE_JAR - * - * Revision 1.19 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.18 2002/03/25 22:12:45 oes - * Added fix for undefined INADDR_NONE on Solaris by Bart Schelstraete - * - * Revision 1.17 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.16 2002/01/17 21:01:02 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Revision 1.15 2001/10/10 16:44:16 oes - * Added match_portlist function - * - * Revision 1.14 2001/10/07 15:41:40 oes - * Added prototype for remove_chunked_transfer_coding - * - * Revision 1.13 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.12 2001/07/29 19:01:11 jongfoster - * Changed _FILENAME_H to FILENAME_H_INCLUDED. - * Added forward declarations for needed structures. - * - * Revision 1.11 2001/07/13 14:00:18 oes - * - Introduced gif_deanimate_response - * - Renamed re_process_buffer to pcrs_filter_response - * - Removed all #ifdef PCRS - * - * Revision 1.10 2001/06/29 13:29:01 oes - * Cleaned up and updated to reflect the changesin - * filters.c - * - * Revision 1.9 2001/06/07 23:10:53 jongfoster - * Replacing struct gateway with struct forward_spec - * - * Revision 1.8 2001/06/03 19:12:00 oes - * extracted-CGI relevant stuff - * - * Revision 1.7 2001/05/31 21:21:30 jongfoster - * Permissionsfile / actions file changes: - * - Changed "permission" to "action" throughout - * - changes to file format to allow string parameters - * - Moved helper functions to actions.c - * - * Revision 1.6 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.5 2001/05/27 22:17:04 oes - * - * - re_process_buffer no longer writes the modified buffer - * to the client, which was very ugly. It now returns the - * buffer, which it is then written by chat. - * - * - content_length now adjusts the Content-Length: header - * for modified documents rather than crunch()ing it. - * (Length info in csp->content_length, which is 0 for - * unmodified documents) - * - * - For this to work, sed() is called twice when filtering. - * - * Revision 1.4 2001/05/26 15:26:15 jongfoster - * ACL feature now provides more security by immediately dropping - * connections from untrusted hosts. - * - * Revision 1.3 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.2 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.1.1.1 2001/05/15 13:58:52 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - - -struct access_control_addr; -struct client_state; -struct http_request; -struct http_response; -struct current_action_spec; -struct url_actions; -struct url_spec; - - -/* - * ACL checking - */ -#ifdef FEATURE_ACL -extern int block_acl(const struct access_control_addr *dst, const struct client_state *csp); -extern int acl_addr(const char *aspec, struct access_control_addr *aca); -#endif /* def FEATURE_ACL */ - -/* - * Interceptors - */ -extern struct http_response *block_url(struct client_state *csp); -extern struct http_response *redirect_url(struct client_state *csp); -#ifdef FEATURE_TRUST -extern struct http_response *trust_url(struct client_state *csp); -#endif /* def FEATURE_TRUST */ - -/* - * Request inspectors - */ -#ifdef FEATURE_TRUST -extern int is_untrusted_url(const struct client_state *csp); -#endif /* def FEATURE_TRUST */ -#ifdef FEATURE_IMAGE_BLOCKING -extern int is_imageurl(const struct client_state *csp); -#endif /* def FEATURE_IMAGE_BLOCKING */ -extern int connect_port_is_forbidden(const struct client_state *csp); - -/* - * Determining applicable actions - */ -extern void get_url_actions(struct client_state *csp, - struct http_request *http); -extern void apply_url_actions(struct current_action_spec *action, - struct http_request *http, - struct url_actions *b); -/* - * Determining parent proxies - */ -extern const struct forward_spec *forward_url(struct client_state *csp, - const struct http_request *http); - -/* - * Content modification - */ - -typedef char *(*filter_function_ptr)(); -extern char *execute_content_filter(struct client_state *csp, filter_function_ptr content_filter); - -extern filter_function_ptr get_filter_function(struct client_state *csp); -extern char *execute_single_pcrs_command(char *subject, const char *pcrs_command, int *hits); -extern char *rewrite_url(char *old_url, const char *pcrs_command); -extern char *get_last_url(char *subject, const char *redirect_mode); - -extern pcrs_job *compile_dynamic_pcrs_job_list(const struct client_state *csp, const struct re_filterfile_spec *b); - -extern int content_filters_enabled(const struct current_action_spec *action); - -/* - * Handling Max-Forwards: - */ -extern struct http_response *direct_response(struct client_state *csp); - - -/* - * Solaris fix: - */ -#ifndef INADDR_NONE -#define INADDR_NONE -1 -#endif - -/* - * Revision control strings from this header and associated .c file - */ -extern const char filters_rcs[]; -extern const char filters_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef FILTERS_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/gateway.c b/external/privoxy/gateway.c deleted file mode 100644 index 1e4ffd0..0000000 --- a/external/privoxy/gateway.c +++ /dev/null @@ -1,1379 +0,0 @@ -const char gateway_rcs[] = "$Id: gateway.c,v 1.48 2009/02/13 17:20:36 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/gateway.c,v $ - * - * Purpose : Contains functions to connect to a server, possibly - * using a "forwarder" (i.e. HTTP proxy and/or a SOCKS4 - * or SOCKS5 proxy). - * - * Copyright : Written by and Copyright (C) 2001-2009 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: gateway.c,v $ - * Revision 1.48 2009/02/13 17:20:36 fabiankeil - * Reword keep-alive support warning and only show - * it #if !defined(HAVE_POLL) && !defined(_WIN32). - * - * Revision 1.47 2008/12/24 17:06:19 fabiankeil - * Keep a thread around to timeout alive connections - * even if no new requests are coming in. - * - * Revision 1.46 2008/12/13 11:07:23 fabiankeil - * Remove duplicated debugging checks - * in connection_destination_matches(). - * - * Revision 1.45 2008/12/04 18:17:07 fabiankeil - * Fix some cparser warnings. - * - * Revision 1.44 2008/11/22 11:54:04 fabiankeil - * Move log message around to include the socket number. - * - * Revision 1.43 2008/11/13 09:15:51 fabiankeil - * Make keep_alive_timeout static. - * - * Revision 1.42 2008/11/13 09:08:42 fabiankeil - * Add new config option: keep-alive-timeout. - * - * Revision 1.41 2008/11/08 15:29:58 fabiankeil - * Unify two debug messages. - * - * Revision 1.40 2008/11/08 15:14:05 fabiankeil - * Fix duplicated debugging check. - * - * Revision 1.39 2008/10/25 11:33:01 fabiankeil - * Remove already out-commented line left over from debugging. - * - * Revision 1.38 2008/10/24 17:33:00 fabiankeil - * - Tone the "keep-alive support is experimental" warning - * down a bit as hackish 0-chunk detection has been - * implemented recently. - * - Only show the "ndef HAVE_POLL" warning once on start-up. - * - * Revision 1.37 2008/10/23 17:40:53 fabiankeil - * Fix forget_connection() and mark_connection_unused(), - * which would both under certain circumstances access - * reusable_connection[MAX_REUSABLE_CONNECTIONS]. Oops. - * - * Revision 1.36 2008/10/18 19:49:15 fabiankeil - * - Factor close_unusable_connections() out of - * get_reusable_connection() to make sure we really check - * all the remembered connections, not just the ones before - * the next reusable one. - * - Plug two file descriptor leaks. Internally marking - * connections as closed doesn't cut it. - * - * Revision 1.35 2008/10/17 17:12:01 fabiankeil - * In socket_is_still_usable(), use select() - * and FD_ISSET() if poll() isn't available. - * - * Revision 1.34 2008/10/17 17:07:13 fabiankeil - * Add preliminary timeout support. - * - * Revision 1.33 2008/10/16 16:34:21 fabiankeil - * Fix two gcc44 warnings. - * - * Revision 1.32 2008/10/16 16:27:22 fabiankeil - * Fix compiler warning. - * - * Revision 1.31 2008/10/16 07:31:11 fabiankeil - * - Factor socket_is_still_usable() out of get_reusable_connection(). - * - If poll() isn't available, show a warning and assume the socket - * is still usable. - * - * Revision 1.30 2008/10/13 17:31:03 fabiankeil - * If a remembered connection is no longer usable and - * has been marked closed, don't bother checking if the - * destination matches. - * - * Revision 1.29 2008/10/11 16:59:41 fabiankeil - * Add missing dots for two log messages. - * - * Revision 1.28 2008/10/09 18:21:41 fabiankeil - * Flush work-in-progress changes to keep outgoing connections - * alive where possible. Incomplete and mostly #ifdef'd out. - * - * Revision 1.27 2008/09/27 15:05:51 fabiankeil - * Return only once in forwarded_connect(). - * - * Revision 1.26 2008/08/18 17:42:06 fabiankeil - * Fix typo in macro name. - * - * Revision 1.25 2008/02/07 18:09:46 fabiankeil - * In socks5_connect: - * - make the buffers quite a bit smaller. - * - properly report "socks5 server unreachable" failures. - * - let strncpy() use the whole buffer. Using a length of 0xffu wasn't actually - * wrong, but requires too much thinking as it doesn't depend on the buffer size. - * - log a message if the socks5 server sends more data than expected. - * - add some assertions and comments. - * - * Revision 1.24 2008/02/04 14:56:29 fabiankeil - * - Fix a compiler warning. - * - Stop assuming that htonl(INADDR_NONE) equals INADDR_NONE. - * - * Revision 1.23 2008/02/04 13:11:35 fabiankeil - * Remember the cause of the SOCKS5 error for the CGI message. - * - * Revision 1.22 2008/02/03 13:46:15 fabiankeil - * Add SOCKS5 support. Patch #1862863 by Eric M. Hopper with minor changes. - * - * Revision 1.21 2007/07/28 12:30:03 fabiankeil - * Modified patch from Song Weijia (#1762559) to - * fix socks requests on big-endian platforms. - * - * Revision 1.20 2007/05/14 10:23:48 fabiankeil - * - Use strlcpy() instead of strcpy(). - * - Use the same buffer for socks requests and socks responses. - * - Fix bogus warning about web_server_addr being used uninitialized. - * - * Revision 1.19 2007/01/25 14:09:45 fabiankeil - * - Save errors in socks4_connect() to csp->error_message. - * - Silence some gcc43 warnings, hopefully the right way. - * - * Revision 1.18 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.16 2002/05/12 21:36:29 jongfoster - * Correcting function comments - * - * Revision 1.15 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.14 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.13 2002/03/13 00:29:59 jongfoster - * Killing warnings - * - * Revision 1.12 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.11 2002/03/08 17:46:04 jongfoster - * Fixing int/size_t warnings - * - * Revision 1.10 2002/03/07 03:50:19 oes - * - Improved handling of failed DNS lookups - * - Fixed compiler warnings - * - * Revision 1.9 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.8 2001/09/13 20:10:12 jongfoster - * Fixing missing #include under Windows - * - * Revision 1.7 2001/09/12 17:58:26 steudten - * - * add #include <string.h> - * - * Revision 1.6 2001/09/10 10:41:16 oes - * Added #include in.h - * - * Revision 1.5 2001/07/29 18:47:57 jongfoster - * Adding missing #include project.h - * - * Revision 1.4 2001/07/24 12:47:06 oes - * Applied BeOS support update by Eugenia - * - * Revision 1.3 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.2 2001/06/07 23:11:38 jongfoster - * Removing gateways[] list - no longer used. - * Replacing function pointer in struct gateway with a directly - * called function forwarded_connect(), which can do the common - * task of deciding whether to connect to the web server or HTTP - * proxy. - * Replacing struct gateway with struct forward_spec - * Fixing bug with SOCKS4A and HTTP proxy server in combination. - * It was a bug which led to the connection being made to the web - * server rather than the HTTP proxy, and also a buffer overrun. - * - * Revision 1.1.1.1 2001/05/15 13:58:54 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <sys/types.h> - -#ifndef _WIN32 -#include <netinet/in.h> -#endif - -#include <errno.h> -#include <string.h> -#include "assert.h" - -#ifdef _WIN32 -#include <winsock2.h> -#endif /* def _WIN32 */ - -#ifdef __BEOS__ -#include <netdb.h> -#endif /* def __BEOS__ */ - -#ifdef __OS2__ -#include <utils.h> -#endif /* def __OS2__ */ - -#include "project.h" -#include "jcc.h" -#include "errlog.h" -#include "jbsockets.h" -#include "gateway.h" -#include "miscutil.h" -#ifdef FEATURE_CONNECTION_KEEP_ALIVE -#ifdef HAVE_POLL -#ifdef __GLIBC__ -#include <sys/poll.h> -#else -#include <poll.h> -#endif /* def __GLIBC__ */ -#endif /* HAVE_POLL */ -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - -const char gateway_h_rcs[] = GATEWAY_H_VERSION; - -static jb_socket socks4_connect(const struct forward_spec * fwd, - const char * target_host, - int target_port, - struct client_state *csp); - -static jb_socket socks5_connect(const struct forward_spec *fwd, - const char *target_host, - int target_port, - struct client_state *csp); - - -#define SOCKS_REQUEST_GRANTED 90 -#define SOCKS_REQUEST_REJECT 91 -#define SOCKS_REQUEST_IDENT_FAILED 92 -#define SOCKS_REQUEST_IDENT_CONFLICT 93 - -#define SOCKS5_REQUEST_GRANTED 0 -#define SOCKS5_REQUEST_FAILED 1 -#define SOCKS5_REQUEST_DENIED 2 -#define SOCKS5_REQUEST_NETWORK_UNREACHABLE 3 -#define SOCKS5_REQUEST_HOST_UNREACHABLE 4 -#define SOCKS5_REQUEST_CONNECTION_REFUSED 5 -#define SOCKS5_REQUEST_TTL_EXPIRED 6 -#define SOCKS5_REQUEST_PROTOCOL_ERROR 7 -#define SOCKS5_REQUEST_BAD_ADDRESS_TYPE 8 - -/* structure of a socks client operation */ -struct socks_op { - unsigned char vn; /* socks version number */ - unsigned char cd; /* command code */ - unsigned char dstport[2]; /* destination port */ - unsigned char dstip[4]; /* destination address */ - char userid; /* first byte of userid */ - char padding[3]; /* make sure sizeof(struct socks_op) is endian-independent. */ - /* more bytes of the userid follow, terminated by a NULL */ -}; - -/* structure of a socks server reply */ -struct socks_reply { - unsigned char vn; /* socks version number */ - unsigned char cd; /* command code */ - unsigned char dstport[2]; /* destination port */ - unsigned char dstip[4]; /* destination address */ -}; - -static const char socks_userid[] = "anonymous"; - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - -#define MAX_REUSABLE_CONNECTIONS 100 -static int keep_alive_timeout = DEFAULT_KEEP_ALIVE_TIMEOUT; - -struct reusable_connection -{ - jb_socket sfd; - int in_use; - char *host; - int port; - time_t timestamp; - - int forwarder_type; - char *gateway_host; - int gateway_port; - char *forward_host; - int forward_port; -}; - -static struct reusable_connection reusable_connection[MAX_REUSABLE_CONNECTIONS]; - -static int mark_connection_unused(jb_socket sfd); -static void mark_connection_closed(struct reusable_connection *closed_connection); -static int socket_is_still_usable(jb_socket sfd); - - -/********************************************************************* - * - * Function : initialize_reusable_connections - * - * Description : Initializes the reusable_connection structures. - * Must be called with connection_reuse_mutex locked. - * - * Parameters : N/A - * - * Returns : void - * - *********************************************************************/ -extern void initialize_reusable_connections(void) -{ - unsigned int slot = 0; - -#if !defined(HAVE_POLL) && !defined(_WIN32) - log_error(LOG_LEVEL_INFO, - "Detecting already dead connections might not work " - "correctly on your platform. In case of problems, " - "unset the keep-alive-timeout option."); -#endif - - for (slot = 0; slot < SZ(reusable_connection); slot++) - { - mark_connection_closed(&reusable_connection[slot]); - } - - log_error(LOG_LEVEL_CONNECT, "Initialized %d socket slots.", slot); -} - - -/********************************************************************* - * - * Function : remember_connection - * - * Description : Remembers a connection for reuse later on. - * - * Parameters : - * 1 : sfd = Open socket to remember. - * 2 : http = The destination for the connection. - * 3 : fwd = The forwarder settings used. - * - * Returns : void - * - *********************************************************************/ -void remember_connection(jb_socket sfd, const struct http_request *http, - const struct forward_spec *fwd) -{ - unsigned int slot = 0; - int free_slot_found = FALSE; - - assert(sfd != JB_INVALID_SOCKET); - - if (mark_connection_unused(sfd)) - { - return; - } - - privoxy_mutex_lock(&connection_reuse_mutex); - - /* Find free socket slot. */ - for (slot = 0; slot < SZ(reusable_connection); slot++) - { - if (reusable_connection[slot].sfd == JB_INVALID_SOCKET) - { - assert(reusable_connection[slot].in_use == 0); - log_error(LOG_LEVEL_CONNECT, - "Remembering socket %d for %s:%d in slot %d.", - sfd, http->host, http->port, slot); - free_slot_found = TRUE; - break; - } - } - - if (!free_slot_found) - { - log_error(LOG_LEVEL_CONNECT, - "No free slots found to remembering socket for %s:%d. Last slot %d.", - http->host, http->port, slot); - privoxy_mutex_unlock(&connection_reuse_mutex); - close_socket(sfd); - return; - } - - assert(NULL != http->host); - reusable_connection[slot].host = strdup(http->host); - if (NULL == reusable_connection[slot].host) - { - log_error(LOG_LEVEL_FATAL, "Out of memory saving socket."); - } - reusable_connection[slot].sfd = sfd; - reusable_connection[slot].port = http->port; - reusable_connection[slot].in_use = 0; - reusable_connection[slot].timestamp = time(NULL); - - assert(NULL != fwd); - assert(reusable_connection[slot].gateway_host == NULL); - assert(reusable_connection[slot].gateway_port == 0); - assert(reusable_connection[slot].forwarder_type == SOCKS_NONE); - assert(reusable_connection[slot].forward_host == NULL); - assert(reusable_connection[slot].forward_port == 0); - - reusable_connection[slot].forwarder_type = fwd->type; - if (NULL != fwd->gateway_host) - { - reusable_connection[slot].gateway_host = strdup(fwd->gateway_host); - if (NULL == reusable_connection[slot].gateway_host) - { - log_error(LOG_LEVEL_FATAL, "Out of memory saving gateway_host."); - } - } - else - { - reusable_connection[slot].gateway_host = NULL; - } - reusable_connection[slot].gateway_port = fwd->gateway_port; - - if (NULL != fwd->forward_host) - { - reusable_connection[slot].forward_host = strdup(fwd->forward_host); - if (NULL == reusable_connection[slot].forward_host) - { - log_error(LOG_LEVEL_FATAL, "Out of memory saving forward_host."); - } - } - else - { - reusable_connection[slot].forward_host = NULL; - } - reusable_connection[slot].forward_port = fwd->forward_port; - - privoxy_mutex_unlock(&connection_reuse_mutex); -} - - -/********************************************************************* - * - * Function : mark_connection_closed - * - * Description : Marks a reused connection closed. - * Must be called with connection_reuse_mutex locked. - * - * Parameters : - * 1 : closed_connection = The connection to mark as closed. - * - * Returns : void - * - *********************************************************************/ -static void mark_connection_closed(struct reusable_connection *closed_connection) -{ - closed_connection->in_use = FALSE; - closed_connection->sfd = JB_INVALID_SOCKET; - freez(closed_connection->host); - closed_connection->port = 0; - closed_connection->timestamp = 0; - closed_connection->forwarder_type = SOCKS_NONE; - freez(closed_connection->gateway_host); - closed_connection->gateway_port = 0; - freez(closed_connection->forward_host); - closed_connection->forward_port = 0; -} - - -/********************************************************************* - * - * Function : forget_connection - * - * Description : Removes a previously remembered connection from - * the list of reusable connections. - * - * Parameters : - * 1 : sfd = The socket belonging to the connection in question. - * - * Returns : void - * - *********************************************************************/ -void forget_connection(jb_socket sfd) -{ - unsigned int slot = 0; - - assert(sfd != JB_INVALID_SOCKET); - - privoxy_mutex_lock(&connection_reuse_mutex); - - for (slot = 0; slot < SZ(reusable_connection); slot++) - { - if (reusable_connection[slot].sfd == sfd) - { - assert(reusable_connection[slot].in_use); - - log_error(LOG_LEVEL_CONNECT, - "Forgetting socket %d for %s:%d in slot %d.", - sfd, reusable_connection[slot].host, - reusable_connection[slot].port, slot); - mark_connection_closed(&reusable_connection[slot]); - privoxy_mutex_unlock(&connection_reuse_mutex); - - return; - } - } - - log_error(LOG_LEVEL_CONNECT, - "Socket %d already forgotten or never remembered.", sfd); - - privoxy_mutex_unlock(&connection_reuse_mutex); -} - - -/********************************************************************* - * - * Function : connection_destination_matches - * - * Description : Determines whether a remembered connection can - * be reused. That is, whether the destination and - * the forwarding settings match. - * - * Parameters : - * 1 : connection = The connection to check. - * 2 : http = The destination for the connection. - * 3 : fwd = The forwarder settings. - * - * Returns : TRUE for yes, FALSE otherwise. - * - *********************************************************************/ -static int connection_destination_matches(const struct reusable_connection *connection, - const struct http_request *http, - const struct forward_spec *fwd) -{ - if ((connection->forwarder_type != fwd->type) - || (connection->gateway_port != fwd->gateway_port) - || (connection->forward_port != fwd->forward_port) - || (connection->port != http->port)) - { - return FALSE; - } - - if (( (NULL != connection->gateway_host) - && (NULL != fwd->gateway_host) - && strcmpic(connection->gateway_host, fwd->gateway_host)) - && (connection->gateway_host != fwd->gateway_host)) - { - log_error(LOG_LEVEL_CONNECT, "Gateway mismatch."); - return FALSE; - } - - if (( (NULL != connection->forward_host) - && (NULL != fwd->forward_host) - && strcmpic(connection->forward_host, fwd->forward_host)) - && (connection->forward_host != fwd->forward_host)) - { - log_error(LOG_LEVEL_CONNECT, "Forwarding proxy mismatch."); - return FALSE; - } - - return (!strcmpic(connection->host, http->host)); - -} - - -/********************************************************************* - * - * Function : close_unusable_connections - * - * Description : Closes remembered connections that have timed - * out or have been closed on the other side. - * - * Parameters : none - * - * Returns : Number of connections that are still alive. - * - *********************************************************************/ -int close_unusable_connections(void) -{ - unsigned int slot = 0; - int connections_alive = 0; - - privoxy_mutex_lock(&connection_reuse_mutex); - - for (slot = 0; slot < SZ(reusable_connection); slot++) - { - if (!reusable_connection[slot].in_use - && (JB_INVALID_SOCKET != reusable_connection[slot].sfd)) - { - time_t time_open = time(NULL) - reusable_connection[slot].timestamp; - - if (keep_alive_timeout < time_open) - { - log_error(LOG_LEVEL_CONNECT, - "The connection to %s:%d in slot %d timed out. " - "Closing socket %d. Timeout is: %d.", - reusable_connection[slot].host, - reusable_connection[slot].port, slot, - reusable_connection[slot].sfd, keep_alive_timeout); - close_socket(reusable_connection[slot].sfd); - mark_connection_closed(&reusable_connection[slot]); - } - else if (!socket_is_still_usable(reusable_connection[slot].sfd)) - { - log_error(LOG_LEVEL_CONNECT, - "The connection to %s:%d in slot %d is no longer usable. " - "Closing socket %d.", reusable_connection[slot].host, - reusable_connection[slot].port, slot, - reusable_connection[slot].sfd); - close_socket(reusable_connection[slot].sfd); - mark_connection_closed(&reusable_connection[slot]); - } - else - { - connections_alive++; - } - } - } - - privoxy_mutex_unlock(&connection_reuse_mutex); - - return connections_alive; - -} - - -/********************************************************************* - * - * Function : socket_is_still_usable - * - * Description : Decides whether or not an open socket is still usable. - * - * Parameters : - * 1 : sfd = The socket to check. - * - * Returns : TRUE for yes, otherwise FALSE. - * - *********************************************************************/ -static int socket_is_still_usable(jb_socket sfd) -{ -#ifdef HAVE_POLL - int poll_result; - struct pollfd poll_fd[1]; - - memset(poll_fd, 0, sizeof(poll_fd)); - poll_fd[0].fd = sfd; - poll_fd[0].events = POLLIN; - - poll_result = poll(poll_fd, 1, 0); - - if (-1 != poll_result) - { - return !(poll_fd[0].revents & POLLIN); - } - else - { - log_error(LOG_LEVEL_CONNECT, "Polling socket %d failed.", sfd); - return FALSE; - } -#else - fd_set readable_fds; - struct timeval timeout; - int ret; - int socket_is_alive = 0; - - memset(&timeout, '\0', sizeof(timeout)); - FD_ZERO(&readable_fds); - FD_SET(sfd, &readable_fds); - - ret = select((int)sfd+1, &readable_fds, NULL, NULL, &timeout); - if (ret < 0) - { - log_error(LOG_LEVEL_ERROR, "select() failed!: %E"); - } - - /* - * XXX: I'm not sure why !FD_ISSET() works, - * but apparently it does. - */ - socket_is_alive = !FD_ISSET(sfd, &readable_fds); - - return socket_is_alive; -#endif /* def HAVE_POLL */ -} - - -/********************************************************************* - * - * Function : get_reusable_connection - * - * Description : Returns an open socket to a previously remembered - * open connection (if there is one). - * - * Parameters : - * 1 : http = The destination for the connection. - * 2 : fwd = The forwarder settings. - * - * Returns : JB_INVALID_SOCKET => No reusable connection found, - * otherwise a usable socket. - * - *********************************************************************/ -static jb_socket get_reusable_connection(const struct http_request *http, - const struct forward_spec *fwd) -{ - jb_socket sfd = JB_INVALID_SOCKET; - unsigned int slot = 0; - - close_unusable_connections(); - - privoxy_mutex_lock(&connection_reuse_mutex); - - for (slot = 0; slot < SZ(reusable_connection); slot++) - { - if (!reusable_connection[slot].in_use - && (JB_INVALID_SOCKET != reusable_connection[slot].sfd)) - { - if (connection_destination_matches(&reusable_connection[slot], http, fwd)) - { - reusable_connection[slot].in_use = TRUE; - sfd = reusable_connection[slot].sfd; - log_error(LOG_LEVEL_CONNECT, - "Found reusable socket %d for %s:%d in slot %d.", - sfd, reusable_connection[slot].host, reusable_connection[slot].port, slot); - break; - } - } - } - - privoxy_mutex_unlock(&connection_reuse_mutex); - - return sfd; - -} - - -/********************************************************************* - * - * Function : mark_connection_unused - * - * Description : Gives a remembered connection free for reuse. - * - * Parameters : - * 1 : sfd = The socket belonging to the connection in question. - * - * Returns : TRUE => Socket found and marked as unused. - * FALSE => Socket not found. - * - *********************************************************************/ -static int mark_connection_unused(jb_socket sfd) -{ - unsigned int slot = 0; - int socket_found = FALSE; - - assert(sfd != JB_INVALID_SOCKET); - - privoxy_mutex_lock(&connection_reuse_mutex); - - for (slot = 0; slot < SZ(reusable_connection); slot++) - { - if (reusable_connection[slot].sfd == sfd) - { - assert(reusable_connection[slot].in_use); - socket_found = TRUE; - log_error(LOG_LEVEL_CONNECT, - "Marking open socket %d for %s:%d in slot %d as unused.", - sfd, reusable_connection[slot].host, - reusable_connection[slot].port, slot); - reusable_connection[slot].in_use = 0; - reusable_connection[slot].timestamp = time(NULL); - break; - } - } - - privoxy_mutex_unlock(&connection_reuse_mutex); - - return socket_found; - -} - - -/********************************************************************* - * - * Function : set_keep_alive_timeout - * - * Description : Sets the timeout after which open - * connections will no longer be reused. - * - * Parameters : - * 1 : timeout = The timeout in seconds. - * - * Returns : void - * - *********************************************************************/ -void set_keep_alive_timeout(int timeout) -{ - keep_alive_timeout = timeout; -} -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - - -/********************************************************************* - * - * Function : forwarded_connect - * - * Description : Connect to a specified web server, possibly via - * a HTTP proxy and/or a SOCKS proxy. - * - * Parameters : - * 1 : fwd = the proxies to use when connecting. - * 2 : http = the http request and apropos headers - * 3 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_INVALID_SOCKET => failure, else it is the socket file descriptor. - * - *********************************************************************/ -jb_socket forwarded_connect(const struct forward_spec * fwd, - struct http_request *http, - struct client_state *csp) -{ - const char * dest_host; - int dest_port; - jb_socket sfd = JB_INVALID_SOCKET; - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - sfd = get_reusable_connection(http, fwd); - if (JB_INVALID_SOCKET != sfd) - { - return sfd; - } -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - - /* Figure out if we need to connect to the web server or a HTTP proxy. */ - if (fwd->forward_host) - { - /* HTTP proxy */ - dest_host = fwd->forward_host; - dest_port = fwd->forward_port; - } - else - { - /* Web server */ - dest_host = http->host; - dest_port = http->port; - } - - /* Connect, maybe using a SOCKS proxy */ - switch (fwd->type) - { - case SOCKS_NONE: - sfd = connect_to(dest_host, dest_port, csp); - break; - case SOCKS_4: - case SOCKS_4A: - sfd = socks4_connect(fwd, dest_host, dest_port, csp); - break; - case SOCKS_5: - sfd = socks5_connect(fwd, dest_host, dest_port, csp); - break; - default: - /* Should never get here */ - log_error(LOG_LEVEL_FATAL, - "SOCKS4 impossible internal error - bad SOCKS type."); - } - - if (JB_INVALID_SOCKET != sfd) - { - log_error(LOG_LEVEL_CONNECT, - "Created new connection to %s:%d on socket %d.", - http->host, http->port, sfd); - } - - return sfd; - -} - - -/********************************************************************* - * - * Function : socks4_connect - * - * Description : Connect to the SOCKS server, and connect through - * it to the specified server. This handles - * all the SOCKS negotiation, and returns a file - * descriptor for a socket which can be treated as a - * normal (non-SOCKS) socket. - * - * Logged error messages are saved to csp->error_message - * and later reused by error_response() for the CGI - * message. strdup allocation failures are handled there. - * - * Parameters : - * 1 : fwd = Specifies the SOCKS proxy to use. - * 2 : target_host = The final server to connect to. - * 3 : target_port = The final port to connect to. - * 4 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_INVALID_SOCKET => failure, else a socket file descriptor. - * - *********************************************************************/ -static jb_socket socks4_connect(const struct forward_spec * fwd, - const char * target_host, - int target_port, - struct client_state *csp) -{ - unsigned int web_server_addr; - char buf[BUFFER_SIZE]; - struct socks_op *c = (struct socks_op *)buf; - struct socks_reply *s = (struct socks_reply *)buf; - size_t n; - size_t csiz; - jb_socket sfd; - int err = 0; - char *errstr = NULL; - - if ((fwd->gateway_host == NULL) || (*fwd->gateway_host == '\0')) - { - /* XXX: Shouldn't the config file parser prevent this? */ - errstr = "NULL gateway host specified."; - err = 1; - } - - if (fwd->gateway_port <= 0) - { - errstr = "invalid gateway port specified."; - err = 1; - } - - if (err) - { - log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr); - csp->error_message = strdup(errstr); - errno = EINVAL; - return(JB_INVALID_SOCKET); - } - - /* build a socks request for connection to the web server */ - - strlcpy(&(c->userid), socks_userid, sizeof(buf) - sizeof(struct socks_op)); - - csiz = sizeof(*c) + sizeof(socks_userid) - sizeof(c->userid) - sizeof(c->padding); - - switch (fwd->type) - { - case SOCKS_4: - web_server_addr = resolve_hostname_to_ip(target_host); - if (web_server_addr == INADDR_NONE) - { - errstr = "could not resolve target host"; - log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s %s", errstr, target_host); - err = 1; - } - else - { - web_server_addr = htonl(web_server_addr); - } - break; - case SOCKS_4A: - web_server_addr = 0x00000001; - n = csiz + strlen(target_host) + 1; - if (n > sizeof(buf)) - { - errno = EINVAL; - errstr = "buffer cbuf too small."; - log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr); - err = 1; - } - else - { - strlcpy(buf + csiz, target_host, sizeof(buf) - sizeof(struct socks_op) - csiz); - /* - * What we forward to the socks4a server should have the - * size of socks_op, plus the length of the userid plus - * its \0 byte (which we don't have to add because the - * first byte of the userid is counted twice as it's also - * part of sock_op) minus the padding bytes (which are part - * of the userid as well), plus the length of the target_host - * (which is stored csiz bytes after the beginning of the buffer), - * plus another \0 byte. - */ - assert(n == sizeof(struct socks_op) + strlen(&(c->userid)) - sizeof(c->padding) + strlen(buf + csiz) + 1); - csiz = n; - } - break; - default: - /* Should never get here */ - log_error(LOG_LEVEL_FATAL, - "socks4_connect: SOCKS4 impossible internal error - bad SOCKS type."); - /* Not reached */ - return(JB_INVALID_SOCKET); - } - - if (err) - { - csp->error_message = strdup(errstr); - return(JB_INVALID_SOCKET); - } - - c->vn = 4; - c->cd = 1; - c->dstport[0] = (unsigned char)((target_port >> 8 ) & 0xff); - c->dstport[1] = (unsigned char)((target_port ) & 0xff); - c->dstip[0] = (unsigned char)((web_server_addr >> 24 ) & 0xff); - c->dstip[1] = (unsigned char)((web_server_addr >> 16 ) & 0xff); - c->dstip[2] = (unsigned char)((web_server_addr >> 8 ) & 0xff); - c->dstip[3] = (unsigned char)((web_server_addr ) & 0xff); - - /* pass the request to the socks server */ - sfd = connect_to(fwd->gateway_host, fwd->gateway_port, csp); - - if (sfd == JB_INVALID_SOCKET) - { - /* - * XXX: connect_to should fill in the exact reason. - * Most likely resolving the IP of the forwarder failed. - */ - errstr = "connect_to failed: see logfile for details"; - err = 1; - } - else if (write_socket(sfd, (char *)c, csiz)) - { - errstr = "SOCKS4 negotiation write failed."; - log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr); - err = 1; - close_socket(sfd); - } - else if (read_socket(sfd, buf, sizeof(buf)) != sizeof(*s)) - { - errstr = "SOCKS4 negotiation read failed."; - log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr); - err = 1; - close_socket(sfd); - } - - if (err) - { - csp->error_message = strdup(errstr); - return(JB_INVALID_SOCKET); - } - - switch (s->cd) - { - case SOCKS_REQUEST_GRANTED: - return(sfd); - case SOCKS_REQUEST_REJECT: - errstr = "SOCKS request rejected or failed."; - errno = EINVAL; - break; - case SOCKS_REQUEST_IDENT_FAILED: - errstr = "SOCKS request rejected because " - "SOCKS server cannot connect to identd on the client."; - errno = EACCES; - break; - case SOCKS_REQUEST_IDENT_CONFLICT: - errstr = "SOCKS request rejected because " - "the client program and identd report " - "different user-ids."; - errno = EACCES; - break; - default: - errno = ENOENT; - snprintf(buf, sizeof(buf), - "SOCKS request rejected for reason code %d.", s->cd); - errstr = buf; - } - - log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr); - csp->error_message = strdup(errstr); - close_socket(sfd); - - return(JB_INVALID_SOCKET); - -} - -/********************************************************************* - * - * Function : translate_socks5_error - * - * Description : Translates a SOCKS errors to a string. - * - * Parameters : - * 1 : socks_error = The error code to translate. - * - * Returns : The string translation. - * - *********************************************************************/ -static const char *translate_socks5_error(int socks_error) -{ - switch (socks_error) - { - /* XXX: these should be more descriptive */ - case SOCKS5_REQUEST_FAILED: - return "SOCKS5 request failed"; - case SOCKS5_REQUEST_DENIED: - return "SOCKS5 request denied"; - case SOCKS5_REQUEST_NETWORK_UNREACHABLE: - return "SOCKS5 network unreachable"; - case SOCKS5_REQUEST_HOST_UNREACHABLE: - return "SOCKS5 host unreachable"; - case SOCKS5_REQUEST_CONNECTION_REFUSED: - return "SOCKS5 connection refused"; - case SOCKS5_REQUEST_TTL_EXPIRED: - return "SOCKS5 TTL expired"; - case SOCKS5_REQUEST_PROTOCOL_ERROR: - return "SOCKS5 client protocol error"; - case SOCKS5_REQUEST_BAD_ADDRESS_TYPE: - return "SOCKS5 domain names unsupported"; - case SOCKS5_REQUEST_GRANTED: - return "everything's peachy"; - default: - return "SOCKS5 negotiation protocol error"; - } -} - -/********************************************************************* - * - * Function : socks5_connect - * - * Description : Connect to the SOCKS server, and connect through - * it to the specified server. This handles - * all the SOCKS negotiation, and returns a file - * descriptor for a socket which can be treated as a - * normal (non-SOCKS) socket. - * - * Parameters : - * 1 : fwd = Specifies the SOCKS proxy to use. - * 2 : target_host = The final server to connect to. - * 3 : target_port = The final port to connect to. - * 4 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_INVALID_SOCKET => failure, else a socket file descriptor. - * - *********************************************************************/ -static jb_socket socks5_connect(const struct forward_spec *fwd, - const char *target_host, - int target_port, - struct client_state *csp) -{ - int err = 0; - char cbuf[300]; - char sbuf[30]; - size_t client_pos = 0; - int server_size = 0; - size_t hostlen = 0; - jb_socket sfd; - const char *errstr = NULL; - - assert(fwd->gateway_host); - if ((fwd->gateway_host == NULL) || (*fwd->gateway_host == '\0')) - { - errstr = "NULL gateway host specified"; - err = 1; - } - - if (fwd->gateway_port <= 0) - { - /* - * XXX: currently this can't happen because in - * case of invalid gateway ports we use the defaults. - * Of course we really shouldn't do that. - */ - errstr = "invalid gateway port specified"; - err = 1; - } - - hostlen = strlen(target_host); - if (hostlen > (size_t)255) - { - errstr = "target host name is longer than 255 characters"; - err = 1; - } - - if (fwd->type != SOCKS_5) - { - /* Should never get here */ - log_error(LOG_LEVEL_FATAL, - "SOCKS5 impossible internal error - bad SOCKS type"); - err = 1; - } - - if (err) - { - errno = EINVAL; - assert(errstr != NULL); - log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr); - csp->error_message = strdup(errstr); - return(JB_INVALID_SOCKET); - } - - /* pass the request to the socks server */ - sfd = connect_to(fwd->gateway_host, fwd->gateway_port, csp); - - if (sfd == JB_INVALID_SOCKET) - { - errstr = "socks5 server unreachable"; - log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr); - csp->error_message = strdup(errstr); - return(JB_INVALID_SOCKET); - } - - client_pos = 0; - cbuf[client_pos++] = '\x05'; /* Version */ - cbuf[client_pos++] = '\x01'; /* One authentication method supported */ - cbuf[client_pos++] = '\x00'; /* The no authentication authentication method */ - - if (write_socket(sfd, cbuf, client_pos)) - { - errstr = "SOCKS5 negotiation write failed"; - csp->error_message = strdup(errstr); - log_error(LOG_LEVEL_CONNECT, "%s", errstr); - close_socket(sfd); - return(JB_INVALID_SOCKET); - } - - if (read_socket(sfd, sbuf, sizeof(sbuf)) != 2) - { - errstr = "SOCKS5 negotiation read failed"; - err = 1; - } - - if (!err && (sbuf[0] != '\x05')) - { - errstr = "SOCKS5 negotiation protocol version error"; - err = 1; - } - - if (!err && (sbuf[1] == '\xff')) - { - errstr = "SOCKS5 authentication required"; - err = 1; - } - - if (!err && (sbuf[1] != '\x00')) - { - errstr = "SOCKS5 negotiation protocol error"; - err = 1; - } - - if (err) - { - assert(errstr != NULL); - log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr); - csp->error_message = strdup(errstr); - close_socket(sfd); - errno = EINVAL; - return(JB_INVALID_SOCKET); - } - - client_pos = 0; - cbuf[client_pos++] = '\x05'; /* Version */ - cbuf[client_pos++] = '\x01'; /* TCP connect */ - cbuf[client_pos++] = '\x00'; /* Reserved, must be 0x00 */ - cbuf[client_pos++] = '\x03'; /* Address is domain name */ - cbuf[client_pos++] = (char)(hostlen & 0xffu); - assert(sizeof(cbuf) - client_pos > (size_t)255); - /* Using strncpy because we really want the nul byte padding. */ - strncpy(cbuf + client_pos, target_host, sizeof(cbuf) - client_pos); - client_pos += (hostlen & 0xffu); - cbuf[client_pos++] = (char)((target_port >> 8) & 0xff); - cbuf[client_pos++] = (char)((target_port ) & 0xff); - - if (write_socket(sfd, cbuf, client_pos)) - { - errstr = "SOCKS5 negotiation read failed"; - csp->error_message = strdup(errstr); - log_error(LOG_LEVEL_CONNECT, "%s", errstr); - close_socket(sfd); - errno = EINVAL; - return(JB_INVALID_SOCKET); - } - - server_size = read_socket(sfd, sbuf, sizeof(sbuf)); - if (server_size < 3) - { - errstr = "SOCKS5 negotiation read failed"; - err = 1; - } - else if (server_size > 20) - { - /* This is somewhat unexpected but doesn't realy matter. */ - log_error(LOG_LEVEL_CONNECT, "socks5_connect: read %d bytes " - "from socks server. Would have accepted up to %d.", - server_size, sizeof(sbuf)); - } - - if (!err && (sbuf[0] != '\x05')) - { - errstr = "SOCKS5 negotiation protocol version error"; - err = 1; - } - - if (!err && (sbuf[2] != '\x00')) - { - errstr = "SOCKS5 negotiation protocol error"; - err = 1; - } - - if (!err) - { - if (sbuf[1] == SOCKS5_REQUEST_GRANTED) - { - return(sfd); - } - errstr = translate_socks5_error(sbuf[1]); - err = 1; - } - - assert(errstr != NULL); - csp->error_message = strdup(errstr); - log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr); - close_socket(sfd); - errno = EINVAL; - - return(JB_INVALID_SOCKET); - -} - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/gateway.h b/external/privoxy/gateway.h deleted file mode 100644 index 94115f7..0000000 --- a/external/privoxy/gateway.h +++ /dev/null @@ -1,158 +0,0 @@ -#ifndef GATEWAY_H_INCLUDED -#define GATEWAY_H_INCLUDED -#define GATEWAY_H_VERSION "$Id: gateway.h,v 1.12 2008/12/24 17:06:19 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/gateway.h,v $ - * - * Purpose : Contains functions to connect to a server, possibly - * using a "gateway" (i.e. HTTP proxy and/or SOCKS4 - * proxy). Also contains the list of gateway types. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: gateway.h,v $ - * Revision 1.12 2008/12/24 17:06:19 fabiankeil - * Keep a thread around to timeout alive connections - * even if no new requests are coming in. - * - * Revision 1.11 2008/11/13 09:08:42 fabiankeil - * Add new config option: keep-alive-timeout. - * - * Revision 1.10 2008/10/09 18:21:41 fabiankeil - * Flush work-in-progress changes to keep outgoing connections - * alive where possible. Incomplete and mostly #ifdef'd out. - * - * Revision 1.9 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.7 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.6 2002/03/25 22:12:45 oes - * Added fix for undefined INADDR_NONE on Solaris by Bart Schelstraete - * - * Revision 1.5 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.4 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.3 2001/07/29 18:58:15 jongfoster - * Removing nested #includes, adding forward declarations for needed - * structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED. - * - * Revision 1.2 2001/06/07 23:12:14 jongfoster - * Removing gateways[] list - no longer used. - * Replacing function pointer in struct gateway with a directly - * called function forwarded_connect(), which can do the common - * task of deciding whether to connect to the web server or HTTP - * proxy. - * Replacing struct gateway with struct forward_spec - * - * Revision 1.1.1.1 2001/05/15 13:58:54 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -struct forward_spec; -struct http_request; -struct client_state; - -extern jb_socket forwarded_connect(const struct forward_spec * fwd, - struct http_request *http, - struct client_state *csp); -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - -/* - * Default number of seconds after which an - * open connection will no longer be reused. - */ -#define DEFAULT_KEEP_ALIVE_TIMEOUT 180 - -extern void set_keep_alive_timeout(int timeout); -extern void initialize_reusable_connections(void); -extern void forget_connection(jb_socket sfd); -extern void remember_connection(jb_socket sfd, - const struct http_request *http, - const struct forward_spec *fwd); -extern int close_unusable_connections(void); -#endif /* FEATURE_CONNECTION_KEEP_ALIVE */ - - -/* - * Solaris fix - */ -#ifndef INADDR_NONE -#define INADDR_NONE -1 -#endif - -/* - * Revision control strings from this header and associated .c file - */ -extern const char gateway_rcs[]; -extern const char gateway_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef GATEWAY_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/genclspec.sh b/external/privoxy/genclspec.sh deleted file mode 100755 index 376e992..0000000 --- a/external/privoxy/genclspec.sh +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh -# -# $Id: genclspec.sh,v 1.2 2002/04/27 04:49:11 morcego Exp $ -# -# Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# $Log: genclspec.sh,v $ -# Revision 1.2 2002/04/27 04:49:11 morcego -# Adding license and copyright comments. -# -# - -VERSION=`cat privoxy-rh.spec | sed -n -e 's/^Version:[ ]*//p'` -RELEASE=`cat privoxy-rh.spec | sed -n -e 's/^Release:[ ]*//p'` -CLTAG=${VERSION}-${RELEASE}cl - -PACKAGER=`rpm --eval "%{packager}"` -if [ "${PACKAGER}" = "%{packager}" ]; then - PACKAGER="genclspec script <developers(a)privoxy.org>" -fi - -export LC_ALL= -export LANG= -DATETAG=`date "+%a %b %d %Y"` - -if [ -r privoxy-cl.spec ]; then - echo Old CL specfile found. Removing it. -fi - -cat privoxy-rh.spec | sed -e 's/^$Release:[ ]*[^ ]\+$[ ]*$/\1cl/' \ - -e "/^%changelog/a* ${DATETAG} ${PACKAGER}" \ - -e "/^%changelog/a+ privoxy-${CLTAG}" \ - -e "/^%changelog/a- Packaging for Conectiva Linux (automatic genarated specfile)" \ - -e '/^%changelog/a \ -' > privoxy-cl.spec - diff --git a/external/privoxy/icons/ico00001.ico b/external/privoxy/icons/ico00001.ico deleted file mode 100644 index a01ccfc..0000000 Binary files a/external/privoxy/icons/ico00001.ico and /dev/null differ diff --git a/external/privoxy/icons/ico00002.ico b/external/privoxy/icons/ico00002.ico deleted file mode 100644 index b7de068..0000000 Binary files a/external/privoxy/icons/ico00002.ico and /dev/null differ diff --git a/external/privoxy/icons/ico00003.ico b/external/privoxy/icons/ico00003.ico deleted file mode 100644 index 99e0980..0000000 Binary files a/external/privoxy/icons/ico00003.ico and /dev/null differ diff --git a/external/privoxy/icons/ico00004.ico b/external/privoxy/icons/ico00004.ico deleted file mode 100644 index 35b76d4..0000000 Binary files a/external/privoxy/icons/ico00004.ico and /dev/null differ diff --git a/external/privoxy/icons/ico00005.ico b/external/privoxy/icons/ico00005.ico deleted file mode 100644 index db9bddf..0000000 Binary files a/external/privoxy/icons/ico00005.ico and /dev/null differ diff --git a/external/privoxy/icons/ico00006.ico b/external/privoxy/icons/ico00006.ico deleted file mode 100644 index 5e1f3fa..0000000 Binary files a/external/privoxy/icons/ico00006.ico and /dev/null differ diff --git a/external/privoxy/icons/ico00007.ico b/external/privoxy/icons/ico00007.ico deleted file mode 100644 index 6ec504d..0000000 Binary files a/external/privoxy/icons/ico00007.ico and /dev/null differ diff --git a/external/privoxy/icons/ico00008.ico b/external/privoxy/icons/ico00008.ico deleted file mode 100644 index e6bc72f..0000000 Binary files a/external/privoxy/icons/ico00008.ico and /dev/null differ diff --git a/external/privoxy/icons/idle.ico b/external/privoxy/icons/idle.ico deleted file mode 100644 index 5ef20fc..0000000 Binary files a/external/privoxy/icons/idle.ico and /dev/null differ diff --git a/external/privoxy/icons/off.ico b/external/privoxy/icons/off.ico deleted file mode 100644 index cea8778..0000000 Binary files a/external/privoxy/icons/off.ico and /dev/null differ diff --git a/external/privoxy/icons/os2.ico b/external/privoxy/icons/os2.ico deleted file mode 100644 index 0ad4f56..0000000 Binary files a/external/privoxy/icons/os2.ico and /dev/null differ diff --git a/external/privoxy/icons/os20.ico b/external/privoxy/icons/os20.ico deleted file mode 100644 index ef5995b..0000000 Binary files a/external/privoxy/icons/os20.ico and /dev/null differ diff --git a/external/privoxy/icons/os21.ico b/external/privoxy/icons/os21.ico deleted file mode 100644 index cc61b61..0000000 Binary files a/external/privoxy/icons/os21.ico and /dev/null differ diff --git a/external/privoxy/icons/os22.ico b/external/privoxy/icons/os22.ico deleted file mode 100644 index d357dfb..0000000 Binary files a/external/privoxy/icons/os22.ico and /dev/null differ diff --git a/external/privoxy/icons/os23.ico b/external/privoxy/icons/os23.ico deleted file mode 100644 index 8ac037f..0000000 Binary files a/external/privoxy/icons/os23.ico and /dev/null differ diff --git a/external/privoxy/icons/os24.ico b/external/privoxy/icons/os24.ico deleted file mode 100644 index f2b87f7..0000000 Binary files a/external/privoxy/icons/os24.ico and /dev/null differ diff --git a/external/privoxy/icons/os25.ico b/external/privoxy/icons/os25.ico deleted file mode 100644 index 5bc68b5..0000000 Binary files a/external/privoxy/icons/os25.ico and /dev/null differ diff --git a/external/privoxy/icons/os26.ico b/external/privoxy/icons/os26.ico deleted file mode 100644 index 408d89e..0000000 Binary files a/external/privoxy/icons/os26.ico and /dev/null differ diff --git a/external/privoxy/icons/os27.ico b/external/privoxy/icons/os27.ico deleted file mode 100644 index 00a8814..0000000 Binary files a/external/privoxy/icons/os27.ico and /dev/null differ diff --git a/external/privoxy/icons/os28.ico b/external/privoxy/icons/os28.ico deleted file mode 100644 index 9153636..0000000 Binary files a/external/privoxy/icons/os28.ico and /dev/null differ diff --git a/external/privoxy/icons/privoxy.ico b/external/privoxy/icons/privoxy.ico deleted file mode 100644 index 4c96d0b..0000000 Binary files a/external/privoxy/icons/privoxy.ico and /dev/null differ diff --git a/external/privoxy/install-sh b/external/privoxy/install-sh deleted file mode 100755 index e9de238..0000000 --- a/external/privoxy/install-sh +++ /dev/null @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/external/privoxy/jarfile b/external/privoxy/jarfile deleted file mode 100644 index e69de29..0000000 diff --git a/external/privoxy/jbsockets.c b/external/privoxy/jbsockets.c deleted file mode 100644 index 4548ff2..0000000 --- a/external/privoxy/jbsockets.c +++ /dev/null @@ -1,1054 +0,0 @@ -const char jbsockets_rcs[] = "$Id: jbsockets.c,v 1.50 2008/12/20 14:53:55 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/jbsockets.c,v $ - * - * Purpose : Contains wrappers for system-specific sockets code, - * so that the rest of Junkbuster can be more - * OS-independent. Contains #ifdefs to make this work - * on many platforms. - * - * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: jbsockets.c,v $ - * Revision 1.50 2008/12/20 14:53:55 fabiankeil - * Add config option socket-timeout to control the time - * Privoxy waits for data to arrive on a socket. Useful - * in case of stale ssh tunnels or when fuzz-testing. - * - * Revision 1.49 2008/11/10 17:03:57 fabiankeil - * Fix a gcc44 warning and remove a now-obsolete cast. - * - * Revision 1.48 2008/09/04 08:13:58 fabiankeil - * Prepare for critical sections on Windows by adding a - * layer of indirection before the pthread mutex functions. - * - * Revision 1.47 2008/03/26 18:07:07 fabiankeil - * Add hostname directive. Closes PR#1918189. - * - * Revision 1.46 2008/03/21 11:13:57 fabiankeil - * Only gather host information if it's actually needed. - * Also move the code out of accept_connection() so it's less likely - * to delay other incoming connections if the host is misconfigured. - * - * Revision 1.45 2007/09/30 16:59:22 fabiankeil - * Set the maximum listen() backlog to 128. Apparently SOMAXCONN is - * neither high enough, nor a hard limit on mingw32. Again for BR#1795281. - * - * Revision 1.44 2007/09/15 13:01:31 fabiankeil - * Increase listen() backlog to SOMAXCONN (or 128) to decrease - * chances of dropped connections under load. Problem reported - * and fix suggested by nobody in BR#1795281. - * - * Revision 1.43 2007/06/01 18:16:36 fabiankeil - * Use the same mutex for gethostbyname() and gethostbyaddr() to prevent - * deadlocks and crashes on OpenBSD and possibly other OS with neither - * gethostbyname_r() nor gethostaddr_r(). Closes BR#1729174. - * Thanks to Ralf Horstmann for report and solution. - * - * Revision 1.42 2007/04/01 17:37:07 fabiankeil - * - Add DNS retries for Solaris and other systems - * whose gethostbyname_r version takes five arguments. - * - Move maximum number of DNS retries into a macro. - * - * Revision 1.41 2006/11/13 19:05:51 fabiankeil - * Make pthread mutex locking more generic. Instead of - * checking for OSX and OpenBSD, check for FEATURE_PTHREAD - * and use mutex locking unless there is an _r function - * available. Better safe than sorry. - * - * Fixes "./configure --disable-pthread" and should result - * in less threading-related problems on pthread-using platforms, - * but it still doesn't fix BR#1122404. - * - * Revision 1.40 2006/09/02 15:36:42 fabiankeil - * Follow the OpenBSD port's lead and protect the resolve - * functions on OpenBSD as well. - * - * Revision 1.39 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.38 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.35.2.8 2006/01/21 16:16:08 david__schmidt - * Thanks to Edward Carrel for his patch to modernize OSX'spthreads support. See bug #1409623. - * - * Revision 1.35.2.7 2005/05/07 21:50:55 david__schmidt - * A few memory leaks plugged (mostly on error paths) - * - * Revision 1.35.2.6 2003/12/17 16:34:40 oes - * Cosmetics - * - * Revision 1.35.2.5 2003/04/29 11:32:54 oes - * Don't rely on h_addr being non-NULL after gethostbyname. - * Works around an oddness in Max OSX and closes bug #724796 - * - * Revision 1.35.2.4 2003/04/04 12:40:20 oes - * Made sure the errno set by bind, not close[socket] is used in - * bind_port. Probably fixes bugs #713777, #705562. - * - * Revision 1.35.2.3 2003/03/07 03:41:04 david__schmidt - * Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX. Hopefully this will take care of all of those pesky crash reports. - * - * Revision 1.35.2.2 2002/11/20 14:37:24 oes - * Fixed Win32 error logging in bind_port. - * Thanks to Oliver Stoeneberg for the hint. - * - * Revision 1.35.2.1 2002/05/26 23:41:27 joergs - * AmigaOS: Fixed wrong type of len in write_socket() - * - * Revision 1.35 2002/04/26 15:50:04 joergs - * AmigaOS: No socklen_t, added AMIGA to the systems using int instead. - * - * Revision 1.34 2002/04/08 20:31:41 swa - * fixed JB spelling - * - * Revision 1.33 2002/04/03 16:02:18 gliptak - * Correcting compile warning with older gcc - * - * Revision 1.32 2002/03/31 17:18:59 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.31 2002/03/29 03:33:13 david__schmidt - * Fix Mac OSX compiler warnings - * - * Revision 1.30 2002/03/27 14:32:43 david__schmidt - * More compiler warning message maintenance - * - * Revision 1.29 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.28 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.27 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.26 2002/03/11 22:07:02 david__schmidt - * OS/2 port maintenance: - * - Fixed EMX build - it had decayed a little - * - Fixed inexplicable crash during FD_ZERO - must be due to a bad macro. - * substituted a memset for now. - * - * Revision 1.25 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.24 2002/03/07 03:51:36 oes - * - Improved handling of failed DNS lookups - * - Fixed compiler warnings etc - * - * Revision 1.23 2002/03/05 00:36:01 jongfoster - * Fixing bug 514988 - unable to restart Junkbuster - * - * Revision 1.22 2002/03/04 02:08:02 david__schmidt - * Enable web editing of actions file on OS/2 (it had been broken all this time!) - * - * Revision 1.21 2002/01/09 14:32:33 oes - * Added support for gethostbyname_r and gethostbyaddr_r. - * - * Revision 1.20 2001/11/16 00:48:48 jongfoster - * Enabling duplicate-socket detection for all platforms, not - * just Win32. - * - * Revision 1.19 2001/10/25 03:40:47 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.18 2001/09/21 23:02:02 david__schmidt - * Cleaning up 2 compiler warnings on OS/2. - * - * Revision 1.17 2001/09/13 20:11:46 jongfoster - * Fixing 2 compiler warnings under Win32 - * - * Revision 1.16 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.15 2001/07/29 17:40:43 jongfoster - * Fixed compiler warning by adding a cast - * - * Revision 1.14 2001/07/18 13:47:59 oes - * Eliminated dirty hack for getsockbyname() - * - * Revision 1.13 2001/07/15 13:56:57 jongfoster - * Removing unused local variable. - * - * Revision 1.12 2001/07/01 17:04:11 oes - * Bugfix: accept_connection no longer uses the obsolete hstrerror() function - * - * Revision 1.11 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.10 2001/06/29 13:29:15 oes - * - Added remote (server) host IP to csp->http->host_ip_addr_str - * - Added detection of local socket IP and fqdn - * - Removed logentry from cancelled commit - * - * Revision 1.9 2001/06/07 23:06:09 jongfoster - * The host parameter to connect_to() is now const. - * - * Revision 1.8 2001/06/03 19:12:07 oes - * filled comment - * - * Revision 1.7 2001/05/28 16:14:00 jongfoster - * Fixing bug in LOG_LEVEL_LOG - * - * Revision 1.6 2001/05/26 17:28:32 jongfoster - * Fixed LOG_LEVEL_LOG - * - * Revision 1.5 2001/05/26 15:26:15 jongfoster - * ACL feature now provides more security by immediately dropping - * connections from untrusted hosts. - * - * Revision 1.4 2001/05/26 00:37:42 jongfoster - * Cosmetic indentation correction. - * - * Revision 1.3 2001/05/25 21:57:54 jongfoster - * Now gives a warning under Windows if you try to bind - * it to a port that's already in use. - * - * Revision 1.2 2001/05/17 23:01:01 oes - * - Cleaned CRLF's from the sources and related files - * - * Revision 1.1.1.1 2001/05/15 13:58:54 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdlib.h> -#include <stdio.h> -#include <string.h> -#include <errno.h> -#include <fcntl.h> -#include <sys/types.h> - -#ifdef _WIN32 - -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> -#include <sys/timeb.h> -#include <io.h> - -#else - -#ifndef __OS2__ -#include <unistd.h> -#endif -#include <sys/time.h> -#include <netinet/in.h> -#include <sys/ioctl.h> -#include <netdb.h> -#include <sys/socket.h> - -#ifndef __BEOS__ -#include <netinet/tcp.h> -#ifndef __OS2__ -#include <arpa/inet.h> -#endif -#else -#include <socket.h> -#endif - -#if defined(__EMX__) || defined (__OS2__) -#include <sys/select.h> /* OS/2/EMX needs a little help with select */ -#ifdef __OS2__ -#include <nerrno.h> -#endif -#endif - -#endif - -#include "project.h" - -#ifdef FEATURE_PTHREAD -#include "jcc.h" -/* jcc.h is for mutex semaphores only */ -#endif /* def FEATURE_PTHREAD */ - -#include "jbsockets.h" -#include "filters.h" -#include "errlog.h" - -const char jbsockets_h_rcs[] = JBSOCKETS_H_VERSION; - -/* - * Maximum number of gethostbyname(_r) retries in case of - * soft errors (TRY_AGAIN). - * XXX: Does it make sense to make this a config option? - */ -#define MAX_DNS_RETRIES 10 - -#define MAX_LISTEN_BACKLOG 128 - - -/********************************************************************* - * - * Function : connect_to - * - * Description : Open a socket and connect to it. Will check - * that this is allowed according to ACL. - * - * Parameters : - * 1 : host = hostname to connect to - * 2 : portnum = port to connent on (XXX: should be unsigned) - * 3 : csp = Current client state (buffers, headers, etc...) - * Not modified, only used for source IP and ACL. - * - * Returns : JB_INVALID_SOCKET => failure, else it is the socket - * file descriptor. - * - *********************************************************************/ -jb_socket connect_to(const char *host, int portnum, struct client_state *csp) -{ - struct sockaddr_in inaddr; - jb_socket fd; - unsigned int addr; - fd_set wfds; - struct timeval tv[1]; -#if !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) - int flags; -#endif /* !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) */ - -#ifdef FEATURE_ACL - struct access_control_addr dst[1]; -#endif /* def FEATURE_ACL */ - - memset((char *)&inaddr, 0, sizeof inaddr); - - if ((addr = resolve_hostname_to_ip(host)) == INADDR_NONE) - { - csp->http->host_ip_addr_str = strdup("unknown"); - return(JB_INVALID_SOCKET); - } - -#ifdef FEATURE_ACL - dst->addr = ntohl(addr); - dst->port = portnum; - - if (block_acl(dst, csp)) - { -#ifdef __OS2__ - errno = SOCEPERM; -#else - errno = EPERM; -#endif - return(JB_INVALID_SOCKET); - } -#endif /* def FEATURE_ACL */ - - inaddr.sin_addr.s_addr = addr; - inaddr.sin_family = AF_INET; - csp->http->host_ip_addr_str = strdup(inet_ntoa(inaddr.sin_addr)); - -#ifndef _WIN32 - if (sizeof(inaddr.sin_port) == sizeof(short)) -#endif /* ndef _WIN32 */ - { - inaddr.sin_port = htons((unsigned short) portnum); - } -#ifndef _WIN32 - else - { - inaddr.sin_port = htonl((unsigned long)portnum); - } -#endif /* ndef _WIN32 */ - -#ifdef _WIN32 - if ((fd = socket(inaddr.sin_family, SOCK_STREAM, 0)) == JB_INVALID_SOCKET) -#else - if ((fd = socket(inaddr.sin_family, SOCK_STREAM, 0)) < 0) -#endif - { - return(JB_INVALID_SOCKET); - } - -#ifdef TCP_NODELAY - { /* turn off TCP coalescence */ - int mi = 1; - setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, (char *) &mi, sizeof (int)); - } -#endif /* def TCP_NODELAY */ - -#if !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__) - if ((flags = fcntl(fd, F_GETFL, 0)) != -1) - { - flags |= O_NDELAY; - fcntl(fd, F_SETFL, flags); - } -#endif /* !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__) */ - - while (connect(fd, (struct sockaddr *) & inaddr, sizeof inaddr) == JB_INVALID_SOCKET) - { -#ifdef _WIN32 - if (errno == WSAEINPROGRESS) -#elif __OS2__ - if (sock_errno() == EINPROGRESS) -#else /* ifndef _WIN32 */ - if (errno == EINPROGRESS) -#endif /* ndef _WIN32 || __OS2__ */ - { - break; - } - -#ifdef __OS2__ - if (sock_errno() != EINTR) -#else - if (errno != EINTR) -#endif /* __OS2__ */ - { - close_socket(fd); - return(JB_INVALID_SOCKET); - } - } - -#if !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__) - if (flags != -1) - { - flags &= ~O_NDELAY; - fcntl(fd, F_SETFL, flags); - } -#endif /* !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__) */ - - /* wait for connection to complete */ - FD_ZERO(&wfds); - FD_SET(fd, &wfds); - - tv->tv_sec = 30; - tv->tv_usec = 0; - - /* MS Windows uses int, not SOCKET, for the 1st arg of select(). Wierd! */ - if (select((int)fd + 1, NULL, &wfds, NULL, tv) <= 0) - { - close_socket(fd); - return(JB_INVALID_SOCKET); - } - return(fd); - -} - - -/********************************************************************* - * - * Function : write_socket - * - * Description : Write the contents of buf (for n bytes) to socket fd. - * - * Parameters : - * 1 : fd = file descriptor (aka. handle) of socket to write to. - * 2 : buf = pointer to data to be written. - * 3 : len = length of data to be written to the socket "fd". - * - * Returns : 0 on success (entire buffer sent). - * nonzero on error. - * - *********************************************************************/ -#ifdef AMIGA -int write_socket(jb_socket fd, const char *buf, ssize_t len) -#else -int write_socket(jb_socket fd, const char *buf, size_t len) -#endif -{ - if (len == 0) - { - return 0; - } - - if (len < 0) /* constant condition - size_t isn't ever negative */ - { - return 1; - } - - log_error(LOG_LEVEL_LOG, "%N", len, buf); - -#if defined(_WIN32) - return (send(fd, buf, (int)len, 0) != (int)len); -#elif defined(__BEOS__) || defined(AMIGA) - return (send(fd, buf, len, 0) != len); -#elif defined(__OS2__) - /* - * Break the data up into SOCKET_SEND_MAX chunks for sending... - * OS/2 seemed to complain when the chunks were too large. - */ -#define SOCKET_SEND_MAX 65000 - { - int write_len = 0, send_len, send_rc = 0, i = 0; - while ((i < len) && (send_rc != -1)) - { - if ((i + SOCKET_SEND_MAX) > len) - send_len = len - i; - else - send_len = SOCKET_SEND_MAX; - send_rc = send(fd,(char*)buf + i, send_len, 0); - if (send_rc == -1) - return 1; - i = i + send_len; - } - return 0; - } -#else - return (write(fd, buf, len) != len); -#endif - -} - - -/********************************************************************* - * - * Function : read_socket - * - * Description : Read from a TCP/IP socket in a platform independent way. - * - * Parameters : - * 1 : fd = file descriptor of the socket to read - * 2 : buf = pointer to buffer where data will be written - * Must be >= len bytes long. - * 3 : len = maximum number of bytes to read - * - * Returns : On success, the number of bytes read is returned (zero - * indicates end of file), and the file position is advanced - * by this number. It is not an error if this number is - * smaller than the number of bytes requested; this may hap- - * pen for example because fewer bytes are actually available - * right now (maybe because we were close to end-of-file, or - * because we are reading from a pipe, or from a terminal, - * or because read() was interrupted by a signal). On error, - * -1 is returned, and errno is set appropriately. In this - * case it is left unspecified whether the file position (if - * any) changes. - * - *********************************************************************/ -int read_socket(jb_socket fd, char *buf, int len) -{ - if (len <= 0) - { - return(0); - } - -#if defined(_WIN32) - return(recv(fd, buf, len, 0)); -#elif defined(__BEOS__) || defined(AMIGA) || defined(__OS2__) - return(recv(fd, buf, (size_t)len, 0)); -#else - return(read(fd, buf, (size_t)len)); -#endif -} - - -/********************************************************************* - * - * Function : data_is_available - * - * Description : Waits for data to arrive on a socket. - * - * Parameters : - * 1 : fd = file descriptor of the socket to read - * 2 : seconds_to_wait = number of seconds after which we give up. - * - * Returns : TRUE if data arrived in time, - * FALSE otherwise. - * - *********************************************************************/ -int data_is_available(jb_socket fd, int seconds_to_wait) -{ - fd_set rfds; - struct timeval timeout; - int n; - - memset(&timeout, 0, sizeof(timeout)); - timeout.tv_sec = seconds_to_wait; - -#ifdef __OS2__ - /* Copy and pasted from jcc.c ... */ - memset(&rfds, 0, sizeof(fd_set)); -#else - FD_ZERO(&rfds); -#endif - FD_SET(fd, &rfds); - - n = select(fd+1, &rfds, NULL, NULL, &timeout); - - /* - * XXX: Do we care about the different error conditions? - */ - return (n == 1); -} - - -/********************************************************************* - * - * Function : close_socket - * - * Description : Closes a TCP/IP socket - * - * Parameters : - * 1 : fd = file descriptor of socket to be closed - * - * Returns : void - * - *********************************************************************/ -void close_socket(jb_socket fd) -{ -#if defined(_WIN32) || defined(__BEOS__) - closesocket(fd); -#elif defined(AMIGA) - CloseSocket(fd); -#elif defined(__OS2__) - soclose(fd); -#else - close(fd); -#endif - -} - - -/********************************************************************* - * - * Function : bind_port - * - * Description : Call socket, set socket options, and listen. - * Called by listen_loop to "boot up" our proxy address. - * - * Parameters : - * 1 : hostnam = TCP/IP address to bind/listen to - * 2 : portnum = port to listen on - * 3 : pfd = pointer used to return file descriptor. - * - * Returns : if success, returns 0 and sets *pfd. - * if failure, returns -3 if address is in use, - * -2 if address unresolvable, - * -1 otherwise - *********************************************************************/ -int bind_port(const char *hostnam, int portnum, jb_socket *pfd) -{ - struct sockaddr_in inaddr; - jb_socket fd; -#ifndef _WIN32 - int one = 1; -#endif /* ndef _WIN32 */ - - *pfd = JB_INVALID_SOCKET; - - memset((char *)&inaddr, '\0', sizeof inaddr); - - inaddr.sin_family = AF_INET; - inaddr.sin_addr.s_addr = resolve_hostname_to_ip(hostnam); - - if (inaddr.sin_addr.s_addr == INADDR_NONE) - { - return(-2); - } - -#ifndef _WIN32 - if (sizeof(inaddr.sin_port) == sizeof(short)) -#endif /* ndef _WIN32 */ - { - inaddr.sin_port = htons((unsigned short) portnum); - } -#ifndef _WIN32 - else - { - inaddr.sin_port = htonl((unsigned long) portnum); - } -#endif /* ndef _WIN32 */ - - fd = socket(AF_INET, SOCK_STREAM, 0); - -#ifdef _WIN32 - if (fd == JB_INVALID_SOCKET) -#else - if (fd < 0) -#endif - { - return(-1); - } - -#ifndef _WIN32 - /* - * This is not needed for Win32 - in fact, it stops - * duplicate instances of Privoxy from being caught. - * - * On UNIX, we assume the user is sensible enough not - * to start Privoxy multiple times on the same IP. - * Without this, stopping and restarting Privoxy - * from a script fails. - * Note: SO_REUSEADDR is meant to only take over - * sockets which are *not* in listen state in Linux, - * e.g. sockets in TIME_WAIT. YMMV. - */ - setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (char *)&one, sizeof(one)); -#endif /* ndef _WIN32 */ - - if (bind(fd, (struct sockaddr *)&inaddr, sizeof(inaddr)) < 0) - { -#ifdef _WIN32 - errno = WSAGetLastError(); - if (errno == WSAEADDRINUSE) -#else - if (errno == EADDRINUSE) -#endif - { - close_socket(fd); - return(-3); - } - else - { - close_socket(fd); - return(-1); - } - } - - while (listen(fd, MAX_LISTEN_BACKLOG) == -1) - { - if (errno != EINTR) - { - return(-1); - } - } - - *pfd = fd; - return 0; - -} - - -/********************************************************************* - * - * Function : get_host_information - * - * Description : Determines the IP address the client used to - * reach us and the hostname associated with it. - * - * XXX: Most of the code has been copy and pasted - * from accept_connection() and not all of the - * ifdefs paths have been tested afterwards. - * - * Parameters : - * 1 : afd = File descriptor returned from accept(). - * 2 : ip_address = Pointer to return the pointer to - * the ip address string. - * 3 : hostname = Pointer to return the pointer to - * the hostname or NULL if the caller - * isn't interested in it. - * - * Returns : void. - * - *********************************************************************/ -void get_host_information(jb_socket afd, char **ip_address, char **hostname) -{ - struct sockaddr_in server; - struct hostent *host = NULL; -#if defined(_WIN32) || defined(__OS2__) || defined(__APPLE_CC__) || defined(AMIGA) - /* according to accept_connection() this fixes a warning. */ - int s_length; -#else - socklen_t s_length; -#endif -#if defined(HAVE_GETHOSTBYADDR_R_8_ARGS) || defined(HAVE_GETHOSTBYADDR_R_7_ARGS) || defined(HAVE_GETHOSTBYADDR_R_5_ARGS) - struct hostent result; -#if defined(HAVE_GETHOSTBYADDR_R_5_ARGS) - struct hostent_data hdata; -#else - char hbuf[HOSTENT_BUFFER_SIZE]; - int thd_err; -#endif /* def HAVE_GETHOSTBYADDR_R_5_ARGS */ -#endif /* def HAVE_GETHOSTBYADDR_R_(8|7|5)_ARGS */ - s_length = sizeof(server); - - if (NULL != hostname) - { - *hostname = NULL; - } - *ip_address = NULL; - - if (!getsockname(afd, (struct sockaddr *) &server, &s_length)) - { - *ip_address = strdup(inet_ntoa(server.sin_addr)); - - if (NULL == hostname) - { - /* - * We're done here, the caller isn't - * interested in knowing the hostname. - */ - return; - } -#if defined(HAVE_GETHOSTBYADDR_R_8_ARGS) - gethostbyaddr_r((const char *)&server.sin_addr, - sizeof(server.sin_addr), AF_INET, - &result, hbuf, HOSTENT_BUFFER_SIZE, - &host, &thd_err); -#elif defined(HAVE_GETHOSTBYADDR_R_7_ARGS) - host = gethostbyaddr_r((const char *)&server.sin_addr, - sizeof(server.sin_addr), AF_INET, - &result, hbuf, HOSTENT_BUFFER_SIZE, &thd_err); -#elif defined(HAVE_GETHOSTBYADDR_R_5_ARGS) - if (0 == gethostbyaddr_r((const char *)&server.sin_addr, - sizeof(server.sin_addr), AF_INET, - &result, &hdata)) - { - host = &result; - } - else - { - host = NULL; - } -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&resolver_mutex); - host = gethostbyaddr((const char *)&server.sin_addr, - sizeof(server.sin_addr), AF_INET); - privoxy_mutex_unlock(&resolver_mutex); -#else - host = gethostbyaddr((const char *)&server.sin_addr, - sizeof(server.sin_addr), AF_INET); -#endif - if (host == NULL) - { - log_error(LOG_LEVEL_ERROR, "Unable to get my own hostname: %E\n"); - } - else - { - *hostname = strdup(host->h_name); - } - } - - return; -} - - -/********************************************************************* - * - * Function : accept_connection - * - * Description : Accepts a connection on a socket. Socket must have - * been created using bind_port(). - * - * Parameters : - * 1 : csp = Client state, cfd, ip_addr_str, and - * ip_addr_long will be set by this routine. - * 2 : fd = file descriptor returned from bind_port - * - * Returns : when a connection is accepted, it returns 1 (TRUE). - * On an error it returns 0 (FALSE). - * - *********************************************************************/ -int accept_connection(struct client_state * csp, jb_socket fd) -{ - struct sockaddr_in client; - jb_socket afd; -#if defined(_WIN32) || defined(__OS2__) || defined(__APPLE_CC__) || defined(AMIGA) - /* Wierdness - fix a warning. */ - int c_length; -#else - socklen_t c_length; -#endif - - c_length = sizeof(client); - -#ifdef _WIN32 - afd = accept (fd, (struct sockaddr *) &client, &c_length); - if (afd == JB_INVALID_SOCKET) - { - return 0; - } -#else - do - { - afd = accept (fd, (struct sockaddr *) &client, &c_length); - } while (afd < 1 && errno == EINTR); - if (afd < 0) - { - return 0; - } -#endif - - csp->cfd = afd; - csp->ip_addr_str = strdup(inet_ntoa(client.sin_addr)); - csp->ip_addr_long = ntohl(client.sin_addr.s_addr); - - return 1; - -} - - -/********************************************************************* - * - * Function : resolve_hostname_to_ip - * - * Description : Resolve a hostname to an internet tcp/ip address. - * NULL or an empty string resolve to INADDR_ANY. - * - * Parameters : - * 1 : host = hostname to resolve - * - * Returns : INADDR_NONE => failure, INADDR_ANY or tcp/ip address if succesful. - * - *********************************************************************/ -unsigned long resolve_hostname_to_ip(const char *host) -{ - struct sockaddr_in inaddr; - struct hostent *hostp; - unsigned int dns_retries = 0; -#if defined(HAVE_GETHOSTBYNAME_R_6_ARGS) || defined(HAVE_GETHOSTBYNAME_R_5_ARGS) || defined(HAVE_GETHOSTBYNAME_R_3_ARGS) - struct hostent result; -#if defined(HAVE_GETHOSTBYNAME_R_6_ARGS) || defined(HAVE_GETHOSTBYNAME_R_5_ARGS) - char hbuf[HOSTENT_BUFFER_SIZE]; - int thd_err; -#else /* defined(HAVE_GETHOSTBYNAME_R_3_ARGS) */ - struct hostent_data hdata; -#endif /* def HAVE_GETHOSTBYNAME_R_(6|5)_ARGS */ -#endif /* def HAVE_GETHOSTBYNAME_R_(6|5|3)_ARGS */ - - if ((host == NULL) || (*host == '\0')) - { - return(INADDR_ANY); - } - - memset((char *) &inaddr, 0, sizeof inaddr); - - if ((inaddr.sin_addr.s_addr = inet_addr(host)) == -1) - { -#if defined(HAVE_GETHOSTBYNAME_R_6_ARGS) - while (gethostbyname_r(host, &result, hbuf, - HOSTENT_BUFFER_SIZE, &hostp, &thd_err) - && (thd_err == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES)) - { - log_error(LOG_LEVEL_ERROR, - "Timeout #%u while trying to resolve %s. Trying again.", - dns_retries, host); - } -#elif defined(HAVE_GETHOSTBYNAME_R_5_ARGS) - while (NULL == (hostp = gethostbyname_r(host, &result, - hbuf, HOSTENT_BUFFER_SIZE, &thd_err)) - && (thd_err == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES)) - { - log_error(LOG_LEVEL_ERROR, - "Timeout #%u while trying to resolve %s. Trying again.", - dns_retries, host); - } -#elif defined(HAVE_GETHOSTBYNAME_R_3_ARGS) - /* - * XXX: Doesn't retry in case of soft errors. - * Does this gethostbyname_r version set h_errno? - */ - if (0 == gethostbyname_r(host, &result, &hdata)) - { - hostp = &result; - } - else - { - hostp = NULL; - } -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&resolver_mutex); - while (NULL == (hostp = gethostbyname(host)) - && (h_errno == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES)) - { - log_error(LOG_LEVEL_ERROR, - "Timeout #%u while trying to resolve %s. Trying again.", - dns_retries, host); - } - privoxy_mutex_unlock(&resolver_mutex); -#else - while (NULL == (hostp = gethostbyname(host)) - && (h_errno == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES)) - { - log_error(LOG_LEVEL_ERROR, - "Timeout #%u while trying to resolve %s. Trying again.", - dns_retries, host); - } -#endif /* def HAVE_GETHOSTBYNAME_R_(6|5|3)_ARGS */ - /* - * On Mac OSX, if a domain exists but doesn't have a type A - * record associated with it, the h_addr member of the struct - * hostent returned by gethostbyname is NULL, even if h_length - * is 4. Therefore the second test below. - */ - if (hostp == NULL || hostp->h_addr == NULL) - { - errno = EINVAL; - log_error(LOG_LEVEL_ERROR, "could not resolve hostname %s", host); - return(INADDR_NONE); - } - if (hostp->h_addrtype != AF_INET) - { -#ifdef _WIN32 - errno = WSAEPROTOTYPE; -#else - errno = EPROTOTYPE; -#endif - log_error(LOG_LEVEL_ERROR, "hostname %s resolves to unknown address type.", host); - return(INADDR_NONE); - } - memcpy( - (char *) &inaddr.sin_addr, - (char *) hostp->h_addr, - sizeof(inaddr.sin_addr) - ); - } - return(inaddr.sin_addr.s_addr); - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/jbsockets.h b/external/privoxy/jbsockets.h deleted file mode 100644 index 115cb6a..0000000 --- a/external/privoxy/jbsockets.h +++ /dev/null @@ -1,149 +0,0 @@ -#ifndef JBSOCKETS_H_INCLUDED -#define JBSOCKETS_H_INCLUDED -#define JBSOCKETS_H_VERSION "$Id: jbsockets.h,v 1.14 2008/12/20 14:53:55 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/jbsockets.h,v $ - * - * Purpose : Contains wrappers for system-specific sockets code, - * so that the rest of Junkbuster can be more - * OS-independent. Contains #ifdefs to make this work - * on many platforms. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: jbsockets.h,v $ - * Revision 1.14 2008/12/20 14:53:55 fabiankeil - * Add config option socket-timeout to control the time - * Privoxy waits for data to arrive on a socket. Useful - * in case of stale ssh tunnels or when fuzz-testing. - * - * Revision 1.13 2008/03/21 11:13:59 fabiankeil - * Only gather host information if it's actually needed. - * Also move the code out of accept_connection() so it's less likely - * to delay other incoming connections if the host is misconfigured. - * - * Revision 1.12 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.9.2.1 2002/05/26 23:41:27 joergs - * AmigaOS: Fixed wrong type of len in write_socket() - * - * Revision 1.9 2002/04/08 20:31:41 swa - * fixed JB spelling - * - * Revision 1.8 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.7 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.6 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.5 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.4 2002/03/07 03:51:36 oes - * - Improved handling of failed DNS lookups - * - Fixed compiler warnings etc - * - * Revision 1.3 2001/07/29 19:01:11 jongfoster - * Changed _FILENAME_H to FILENAME_H_INCLUDED. - * Added forward declarations for needed structures. - * - * Revision 1.2 2001/06/07 23:06:09 jongfoster - * The host parameter to connect_to() is now const. - * - * Revision 1.1.1.1 2001/05/15 13:58:54 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - -struct client_state; - -extern jb_socket connect_to(const char *host, int portnum, struct client_state *csp); -#ifdef AMIGA -extern int write_socket(jb_socket fd, const char *buf, ssize_t n); -#else -extern int write_socket(jb_socket fd, const char *buf, size_t n); -#endif -extern int read_socket(jb_socket fd, char *buf, int n); -extern int data_is_available(jb_socket fd, int seconds_to_wait); -extern void close_socket(jb_socket fd); - -extern int bind_port(const char *hostnam, int portnum, jb_socket *pfd); -extern int accept_connection(struct client_state * csp, jb_socket fd); -extern void get_host_information(jb_socket afd, char **ip_address, char **hostname); - -extern unsigned long resolve_hostname_to_ip(const char *host); - -/* Revision control strings from this header and associated .c file */ -extern const char jbsockets_rcs[]; -extern const char jbsockets_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef JBSOCKETS_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/jcc.c b/external/privoxy/jcc.c deleted file mode 100644 index 1007128..0000000 --- a/external/privoxy/jcc.c +++ /dev/null @@ -1,4486 +0,0 @@ -const char jcc_rcs[] = "$Id: jcc.c,v 1.235 2009/03/18 21:01:20 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/jcc.c,v $ - * - * Purpose : Main file. Contains main() method, main loop, and - * the main connection-handling function. - * - * Copyright : Written by and Copyright (C) 2001-2009 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: jcc.c,v $ - * Revision 1.235 2009/03/18 21:01:20 fabiankeil - * Comment fix. Spotted by Roland. - * - * Revision 1.234 2009/03/18 20:48:42 fabiankeil - * If the --no-daemon option is used, enable LOG_LEVEL_INFO - * before the config file has been parsed (as we always did). - * - * Revision 1.233 2009/03/13 14:10:07 fabiankeil - * Fix some more harmless warnings on amd64. - * - * Revision 1.232 2009/03/08 19:29:16 fabiankeil - * Reinitialize the timeout structure every time before passing - * it to select(). Apparently some implementations mess with it. - * Probably fixes #2669131 reported by cyberpatrol. - * - * Revision 1.231 2009/03/08 14:19:23 fabiankeil - * Fix justified (but harmless) compiler warnings - * on platforms where sizeof(int) < sizeof(long). - * - * Revision 1.230 2009/03/07 13:09:17 fabiankeil - * Change csp->expected_content and_csp->expected_content_length from - * size_t to unsigned long long to reduce the likelihood of integer - * overflows that would let us close the connection prematurely. - * Bug found while investigating #2669131, reported by cyberpatrol. - * - * Revision 1.229 2009/03/07 11:17:01 fabiankeil - * Fix compiler warning. - * - * Revision 1.228 2009/03/06 20:30:13 fabiankeil - * Log unsigned values as such. - * - * Revision 1.227 2009/03/02 19:18:11 fabiankeil - * Streamline parse_http_request()'s prototype. As - * cparser pointed out it doesn't actually use csp. - * - * Revision 1.226 2009/03/01 18:28:24 fabiankeil - * Help clang understand that we aren't dereferencing - * NULL pointers here. - * - * Revision 1.225 2009/02/19 18:09:32 fabiankeil - * Unbreak build without FEATURE_CONNECTION_KEEP_ALIVE. - * Noticed by David. - * - * Revision 1.224 2009/02/14 15:32:04 fabiankeil - * Add the request URL to the timeout message in chat(). - * Suggested by Lee. - * - * Revision 1.223 2009/02/09 21:21:16 fabiankeil - * Now that init_log_module() is called earlier, call show_version() - * later on from main() directly so it doesn't get called for --help - * or --version. - * - * Revision 1.222 2009/02/08 12:56:51 fabiankeil - * Call initialize_mutexes() before init_log_module() again. - * Broken since r220, might be the cause of Lee's #2579448. - * - * Revision 1.221 2009/02/06 18:02:58 fabiankeil - * When dropping privileges, also give up membership in supplementary - * groups. Thanks to Matthias Drochner for reporting the problem, - * providing the initial patch and testing the final version. - * - * Revision 1.220 2009/02/04 18:29:07 fabiankeil - * Initialize the log module before parsing arguments. - * Thanks to Matthias Drochner for the report. - * - * Revision 1.219 2009/01/31 16:08:21 fabiankeil - * Remove redundant error check in receive_client_request(). - * - * Revision 1.218 2009/01/31 12:25:54 fabiankeil - * Flatten indentation in receive_client_request(). - * - * Revision 1.217 2009/01/07 19:50:09 fabiankeil - * - If the socket-timeout has been reached and the client - * hasn't received any data yet, send an explanation before - * closing the connection. - * - In get_request_line(), signal timeouts the right way. - * - * Revision 1.216 2008/12/24 22:13:11 ler762 - * fix GCC 3.4.4 warning - * - * Revision 1.215 2008/12/24 17:06:19 fabiankeil - * Keep a thread around to timeout alive connections - * even if no new requests are coming in. - * - * Revision 1.214 2008/12/20 14:53:55 fabiankeil - * Add config option socket-timeout to control the time - * Privoxy waits for data to arrive on a socket. Useful - * in case of stale ssh tunnels or when fuzz-testing. - * - * Revision 1.213 2008/12/15 18:45:51 fabiankeil - * When logging crunches, log the whole URL, so one can easily - * differentiate between vanilla HTTP and CONNECT requests. - * - * Revision 1.212 2008/12/14 15:46:22 fabiankeil - * Give crunched requests their own log level. - * - * Revision 1.211 2008/12/06 10:05:03 fabiankeil - * Downgrade "Received x bytes while expecting y." message to - * LOG_LEVEL_CONNECT as it doesn't necessarily indicate an error. - * - * Revision 1.210 2008/12/02 22:03:18 fabiankeil - * Don't miscalculate byte_count if we don't get all the - * server headers with one read_socket() call. With keep-alive - * support enabled, this caused delays until the server closed - * the connection. - * - * Revision 1.209 2008/11/27 09:44:04 fabiankeil - * Cosmetics for the last commit: Don't watch out for - * the last chunk if the content isn't chunk-encoded or - * if we already determined the content length previously. - * - * Revision 1.208 2008/11/26 18:24:17 fabiankeil - * Recognize that the server response is complete if the - * last chunk is read together with the server headers. - * Reported by Lee. - * - * Revision 1.207 2008/11/25 17:25:16 fabiankeil - * Don't convert the client-header list to text until we need to. - * - * Revision 1.206 2008/11/23 17:00:11 fabiankeil - * Some more chat() cosmetics. - * - * Revision 1.205 2008/11/16 12:43:49 fabiankeil - * Turn keep-alive support into a runtime feature - * that is disabled by setting keep-alive-timeout - * to a negative value. - * - * Revision 1.204 2008/11/06 19:42:17 fabiankeil - * Fix last-chunk detection hack to also apply - * if buf[] contains nothing but the last-chunk. - * - * Revision 1.203 2008/11/06 18:34:35 fabiankeil - * Factor receive_client_request() and - * parse_client_request() out of chat(). - * - * Revision 1.202 2008/11/02 18:40:34 fabiankeil - * If we received a different amount of data than we expected, - * log a warning and make sure the server socket isn't reused. - * - * Revision 1.201 2008/11/02 16:48:20 fabiankeil - * Revert revision 1.195 and try again. - * - * Revision 1.200 2008/10/26 16:53:18 fabiankeil - * Fix gcc44 warning. - * - * Revision 1.199 2008/10/26 15:36:10 fabiankeil - * Remove two debug messages with LOG_LEVEL_INFO. - * - * Revision 1.198 2008/10/22 15:19:55 fabiankeil - * Once More, With Feeling: if there is no logfile - * because the user didn't specify one, we shouldn't - * call init_error_log() after receiving SIGHUP either. - * - * Revision 1.197 2008/10/20 17:02:40 fabiankeil - * If SIGHUP is received while we aren't running in daemon - * mode, calling init_error_log() would be a mistake. - * - * Revision 1.196 2008/10/16 09:16:41 fabiankeil - * - Fix two gcc44 conversion warnings. - * - Don't bother logging the last five bytes - * of the 0-chunk. - * - * Revision 1.195 2008/10/13 16:04:37 fabiankeil - * Make sure we don't try to reuse tainted server sockets. - * - * Revision 1.194 2008/10/12 18:35:18 fabiankeil - * The last commit was a bit too ambitious, apparently the content - * length adjustment is only necessary if we aren't buffering. - * - * Revision 1.193 2008/10/12 15:57:35 fabiankeil - * Fix content length calculation if we read headers - * and the start of the body at once. Now that we have - * FEATURE_CONNECTION_KEEP_ALIVE, it actually matters. - * - * Revision 1.192 2008/10/11 18:19:14 fabiankeil - * Even more chat() cosmetics. - * - * Revision 1.191 2008/10/11 18:00:14 fabiankeil - * Reformat some comments in chat(). - * - * Revision 1.190 2008/10/11 14:58:00 fabiankeil - * In case of chunk-encoded content, stop reading if - * the buffer looks like it ends with the last chunk. - * - * Revision 1.189 2008/10/11 09:53:00 fabiankeil - * Let server_response_is_complete() deal properly with - * content that is neither buffered nor read all at once. - * - * Revision 1.188 2008/10/09 18:21:41 fabiankeil - * Flush work-in-progress changes to keep outgoing connections - * alive where possible. Incomplete and mostly #ifdef'd out. - * - * Revision 1.187 2008/09/07 12:35:05 fabiankeil - * Add mutex lock support for _WIN32. - * - * Revision 1.186 2008/09/04 08:13:58 fabiankeil - * Prepare for critical sections on Windows by adding a - * layer of indirection before the pthread mutex functions. - * - * Revision 1.185 2008/08/30 12:03:07 fabiankeil - * Remove FEATURE_COOKIE_JAR. - * - * Revision 1.184 2008/08/22 15:34:45 fabiankeil - * - Silence LLVM/Clang complaint. - * - Make received_hup_signal static. - * - Hide definitions for basedir, pidfile and received_hup_signal - * from __EMX__ as they only seem to be used in case of #ifdef unix. - * - * Revision 1.183 2008/08/21 07:09:35 fabiankeil - * Accept Shoutcast responses again. Problem reported - * and fix suggested by Stefan in #2062860. - * - * Revision 1.182 2008/06/27 11:13:56 fabiankeil - * Fix possible NULL-pointer dereference reported - * by din_a4 in #2003937. Pointy hat to me. - * - * Revision 1.181 2008/05/21 15:47:15 fabiankeil - * Streamline sed()'s prototype and declare - * the header parse and add structures static. - * - * Revision 1.180 2008/05/21 15:26:32 fabiankeil - * - Mark csp as immutable for send_crunch_response(). - * - Fix comment spelling. - * - * Revision 1.179 2008/05/20 20:13:32 fabiankeil - * Factor update_server_headers() out of sed(), ditch the - * first_run hack and make server_patterns_light static. - * - * Revision 1.178 2008/05/10 13:23:38 fabiankeil - * Don't provide get_header() with the whole client state - * structure when it only needs access to csp->iob. - * - * Revision 1.177 2008/05/10 11:51:12 fabiankeil - * Make the "read the rest of the headers" loop a bit more readable. - * - * Revision 1.176 2008/05/10 11:37:57 fabiankeil - * - Instead of logging when the IIS5 hack is enabled, log when it fails. - * - Remove useless comment. - * - * Revision 1.175 2008/05/09 18:53:59 fabiankeil - * Fix comment grammar. - * - * Revision 1.174 2008/05/07 18:05:53 fabiankeil - * Remove the pointless buffer in client_protocol_is_unsupported(). - * - * Revision 1.173 2008/05/06 15:09:00 fabiankeil - * Least-effort fix for bug #1821930 (reported by Lee): - * If the response doesn't look like HTTP, - * tell the client and log the problem. - * - * Revision 1.172 2008/04/16 16:38:21 fabiankeil - * Don't pass the whole csp structure to flush_socket() - * when it only needs a file descriptor and a buffer. - * - * Revision 1.171 2008/03/27 18:27:25 fabiankeil - * Remove kill-popups action. - * - * Revision 1.170 2008/03/06 16:33:46 fabiankeil - * If limit-connect isn't used, don't limit CONNECT requests to port 443. - * - * Revision 1.169 2008/03/04 18:30:39 fabiankeil - * Remove the treat-forbidden-connects-like-blocks action. We now - * use the "blocked" page for forbidden CONNECT requests by default. - * - * Revision 1.168 2008/03/02 12:25:25 fabiankeil - * Also use shiny new connect_port_is_forbidden() in jcc.c. - * - * Revision 1.167 2008/02/23 16:57:12 fabiankeil - * Rename url_actions() to get_url_actions() and let it - * use the standard parameter ordering. - * - * Revision 1.166 2008/02/23 16:33:43 fabiankeil - * Let forward_url() use the standard parameter ordering - * and mark its second parameter immutable. - * - * Revision 1.165 2008/02/02 19:36:56 fabiankeil - * Remove the "Listening ... for local connections only" log message. - * Whether or not remote connections are able to reach Privoxy is up - * to the operating system. - * - * Revision 1.164 2007/12/16 18:32:46 fabiankeil - * Prevent the log messages for CONNECT requests to unacceptable - * ports from printing the limit-connect argument as [null] if - * limit-connect hasn't been explicitly enabled. - * - * Revision 1.163 2007/12/13 01:47:11 david__schmidt - * Make sure all console-mode apps get a usage() instance - * - * Revision 1.162 2007/12/06 17:54:57 fabiankeil - * Reword NO_SERVER_DATA_RESPONSE to make it harder - * to misunderstand what the message is all about. - * - * Revision 1.161 2007/12/04 19:44:22 fabiankeil - * Unbreak trustfile which previously didn't work without - * FEATURE_TOGGLE. Fixes BR#1843585, reported by Lee. - * - * Revision 1.160 2007/11/29 18:00:29 fabiankeil - * Plug memory leak. Spotted by Valgrind, triggered by - * Privoxy-Regression-Test feeding proxyfuzz.py. - * - * Revision 1.159 2007/11/24 14:34:09 fabiankeil - * In the HTTP snipplets, refer to the client as client. - * - * Revision 1.158 2007/11/11 16:44:17 fabiankeil - * Emit a log message when activating the MS IIS5 hack. - * - * Revision 1.157 2007/11/03 17:34:49 fabiankeil - * Log the "weak randomization factor" warning only - * once for mingw32 and provide some more details. - * - * Revision 1.156 2007/11/01 18:20:58 fabiankeil - * Initialize log module after initializing mutexes, future - * deadlocks in that code should now work cross-platform. - * - * Revision 1.155 2007/10/23 20:12:45 fabiankeil - * Fix first CSUCCEED line to end in \r\n as required by RFC1945. - * Reported by Bert van Leeuwen in BR#1818808. - * - * Revision 1.154 2007/10/19 17:00:08 fabiankeil - * Downgrade "Flushing header and buffers" message to LOG_LEVEL_INFO. - * - * Revision 1.153 2007/10/14 14:12:41 fabiankeil - * When in daemon mode, close stderr after the configuration file has been - * parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436. - * - * Revision 1.152 2007/10/04 18:03:34 fabiankeil - * - Fix a crash when parsing invalid requests whose first header - * is rejected by get_header(). Regression (re?)introduced - * in r1.143 by yours truly. - * - Move ACTION_VANILLA_WAFER handling into parsers.c's - * client_cookie_adder() to make sure send-vanilla-wafer can be - * controlled through tags (and thus regression-tested). - * - * Revision 1.151 2007/09/29 10:21:16 fabiankeil - * - Move get_filter_function() from jcc.c to filters.c - * so the filter functions can be static. - * - Don't bother filtering body-less responses. - * - * Revision 1.150 2007/09/28 16:39:29 fabiankeil - * Execute content filters through execute_content_filter(). - * - * Revision 1.149 2007/09/04 15:08:48 fabiankeil - * Initialize req to NULL to make sure it's defined if the - * first read_socket() call fails. Reported by icmp30. - * - * Revision 1.148 2007/08/26 16:47:13 fabiankeil - * Add Stephen Gildea's --pre-chroot-nslookup patch [#1276666], - * extensive comments moved to user manual. - * - * Revision 1.147 2007/08/25 14:42:40 fabiankeil - * Don't crash if a broken header filter wiped out the request line. - * - * Revision 1.146 2007/08/20 17:09:32 fabiankeil - * Fix byte_count calculation in case of flushes - * and don't parse the server headers a second time. - * - * Revision 1.145 2007/08/19 13:13:31 fabiankeil - * - If there's a connection problem after we already forwarded - * parts of the original content, just hang up. Fixes BR#1776724. - * - Fix warnings about unused code on mingw32. - * - In case of flushes, calculate the byte count - * less incorrectly (I think). - * - * Revision 1.144 2007/08/11 14:43:22 fabiankeil - * Add some more prototypes for static functions. - * - * Revision 1.143 2007/08/05 13:58:19 fabiankeil - * Comment out request_contains_null_bytes() until it's used again. - * - * Revision 1.142 2007/08/05 13:50:26 fabiankeil - * #1763173 from Stefan Huehner: s@const static@static const@ - * and declare some more functions static. - * - * Revision 1.141 2007/08/04 09:56:23 fabiankeil - * - Log rejected CONNECT requests with LOG_LEVEL_INFO - * and explain why they were rejected in the first place. - * - Fix the LOG_LEVEL_CLF message for crunches of unallowed - * CONNECT requests. The request line was missing. - * - Add two more XXX reminders as we don't have enough already. - * - * Revision 1.140 2007/07/21 11:51:36 fabiankeil - * As Hal noticed, checking dispatch_cgi() as the last cruncher - * looks like a bug if CGI requests are blocked unintentionally, - * so don't do it unless the user enabled the new config option - * "allow-cgi-request-crunching". - * - * Revision 1.139 2007/07/14 07:46:41 fabiankeil - * - Allow to rewrite the request destination behind the client's back. - * - Turn the weird-looking unconditional for loop that - * reads the client request into a conditional while loop. - * Move the stuff that only runs once out of the loop. - * - Move parts of chat(), server_content_type() and the - * necessary stuff to fix BR#1750917 into get_filter_function(). - * - * Revision 1.138 2007/06/03 18:45:18 fabiankeil - * Temporary workaround for BR#1730105. - * - * Revision 1.137 2007/06/01 18:16:36 fabiankeil - * Use the same mutex for gethostbyname() and gethostbyaddr() to prevent - * deadlocks and crashes on OpenBSD and possibly other OS with neither - * gethostbyname_r() nor gethostaddr_r(). Closes BR#1729174. - * Thanks to Ralf Horstmann for report and solution. - * - * Revision 1.136 2007/06/01 16:41:11 fabiankeil - * Add forward-override{} to change the forwarding settings through - * action sections. This is mainly interesting to forward different - * clients differently (for example based on User-Agent or request - * origin). - * - * Revision 1.135 2007/05/24 17:03:50 fabiankeil - * - Let usage() mention the --chroot parameter. - * - Use read_socket() consistently and always leave - * the last buffer byte alone, even in cases where - * null termination (currently) doesn't matter. - * - * Revision 1.134 2007/05/16 14:59:46 fabiankeil - * - Fix config file loading on Unix if no config file is specified. - * Since r1.97 Privoxy would always interpret the last argument as - * config file, even if it's a valid command line option. - * - Abort in case of unrecognized command line options. Closes #1719696. - * - Remove a bunch of unnecessary strcpy() calls (yay for c&p without thinking). - * - Replace the remaining strcpy() and strcat() calls with strlcpy() and strcat(). - * - * Revision 1.133 2007/05/04 11:23:19 fabiankeil - * - Don't rerun crunchers that only depend on the request URL. - * - Don't count redirects and CGI requests as "blocked requests". - * - * Revision 1.132 2007/04/25 15:15:17 fabiankeil - * Support crunching based on tags created by server-header taggers. - * - * Revision 1.131 2007/04/22 13:24:50 fabiankeil - * Make HTTP snippets static (again). Add a Content-Type for those - * with content so the browser doesn't guess it based on the URL. - * - * Revision 1.130 2007/04/19 13:47:34 fabiankeil - * Move crunching and request line rebuilding out of chat(). - * - * Revision 1.129 2007/04/15 16:39:20 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.128 2007/03/25 16:55:54 fabiankeil - * Don't CLF-log CONNECT requests twice. - * - * Revision 1.127 2007/03/20 13:53:17 fabiankeil - * Log the source address for ACL-related connection drops. - * - * Revision 1.126 2007/03/17 15:20:05 fabiankeil - * New config option: enforce-blocks. - * - * Revision 1.125 2007/03/09 14:12:00 fabiankeil - * - Move null byte check into separate function. - * - Don't confuse the client with error pages - * if a CONNECT request was already confirmed. - * - * Revision 1.124 2007/02/23 14:59:54 fabiankeil - * Speed up NULL byte escaping and only log the complete - * NULL byte requests with header debugging enabled. - * - * Revision 1.123 2007/02/21 18:42:10 fabiankeil - * Answer requests that contain NULL bytes with - * a custom response instead of waiting for more - * data until the client eventually hangs up. - * - * Revision 1.122 2007/02/07 11:12:02 fabiankeil - * - Move delivery and logging of crunched responses - * from chat() into send_crunch_response(). - * - Display the reason for generating http_responses. - * - Log the content length for LOG_LEVEL_CLF correctly - * (still incorrect for some fixed responses). - * - Reword an incorrect comment about - * treat-forbidden-connects-like-blocks violating - * the specs. - * - Add some log messages. - * - * Revision 1.121 2007/01/27 10:52:56 fabiankeil - * Move mutex initialization into separate - * function and exit in case of errors. - * - * Revision 1.120 2007/01/26 14:18:42 fabiankeil - * - Start to reduce chat()'s line count and move - * parts of it into separate functions. - * - Add "HTTP/1.1 100 Continue" hack for BR 756734. - * - * Revision 1.119 2007/01/25 14:02:30 fabiankeil - * - Add Proxy-Agent header to HTTP snippets that are - * supposed to reach HTTP clients only. - * - Made a few CONNECT log messages more descriptive. - * - Catch completely empty server responses (as seen - * with Tor's fake ".noconnect" top level domain). - * - Use shiny new "forwarding-failed" template for socks errors. - * - * Revision 1.118 2007/01/07 07:43:43 joergs - * AmigaOS4 support added. - * - * Revision 1.117 2006/12/31 17:56:37 fabiankeil - * Added config option accept-intercepted-requests - * and disabled it by default. - * - * Revision 1.116 2006/12/29 19:08:22 fabiankeil - * Reverted parts of my last commit - * to keep error handling working. - * - * Revision 1.115 2006/12/29 17:38:57 fabiankeil - * Fixed gcc43 conversion warnings. - * - * Revision 1.114 2006/12/27 18:52:02 fabiankeil - * Fix -pedantic ISO C warning about converting - * from function pointer to object pointer. - * - * Revision 1.113 2006/12/26 17:38:50 fabiankeil - * Silence compiler warning I introduced with my last commit. - * - * Revision 1.112 2006/12/26 17:31:41 fabiankeil - * Mutex protect rand() if POSIX threading - * is used, warn the user if that's not possible - * and stop using it on _WIN32 where it could - * cause crashes. - * - * Revision 1.111 2006/12/23 16:15:06 fabiankeil - * Don't prevent core dumps by catching SIGABRT. - * It's rude and makes debugging unreasonable painful. - * - * Revision 1.110 2006/12/13 14:52:53 etresoft - * Fix build failure on MacOS X. Global symbols can be either static or extern, but not both. - * - * Revision 1.109 2006/12/06 19:41:40 fabiankeil - * Privoxy is now able to run as intercepting - * proxy in combination with any packet filter - * that does the port redirection. The destination - * is extracted from the "Host:" header which - * should be available for nearly all requests. - * - * Moved HTTP snipplets into jcc.c. - * Added error message for gopher proxy requests. - * - * Revision 1.108 2006/11/28 15:38:51 fabiankeil - * Only unlink the pidfile if it's actually used. - * - * Change order of interception checks to make - * it possible to block or redirect requests for - * the cgi pages. - * - * Revision 1.107 2006/11/13 19:05:51 fabiankeil - * Make pthread mutex locking more generic. Instead of - * checking for OSX and OpenBSD, check for FEATURE_PTHREAD - * and use mutex locking unless there is an _r function - * available. Better safe than sorry. - * - * Fixes "./configure --disable-pthread" and should result - * in less threading-related problems on pthread-using platforms, - * but it still doesn't fix BR#1122404. - * - * Revision 1.106 2006/11/06 19:58:23 fabiankeil - * Move pthread.h inclusion from jcc.c to jcc.h. - * Fixes build on x86-freebsd1 (FreeBSD 5.4-RELEASE). - * - * Revision 1.105 2006/11/06 14:26:02 fabiankeil - * Don't exit after receiving the second SIGHUP on Solaris. - * - * Fixes BR 1052235, but the same problem may exist on other - * systems. Once 3.0.6 is out we should use sigset() - * where available and see if it breaks anything. - * - * Revision 1.104 2006/09/23 13:26:38 roro - * Replace TABs by spaces in source code. - * - * Revision 1.103 2006/09/21 12:54:43 fabiankeil - * Fix +redirect{}. Didn't work with -fast-redirects. - * - * Revision 1.102 2006/09/06 13:03:04 fabiankeil - * Respond with 400 and a short text message - * if the client tries to use Privoxy as FTP proxy. - * - * Revision 1.101 2006/09/06 09:23:37 fabiankeil - * Make number of retries in case of forwarded-connect problems - * a config file option (forwarded-connect-retries) and use 0 as - * default. - * - * Revision 1.100 2006/09/03 19:42:59 fabiankeil - * Set random(3) seed. - * - * Revision 1.99 2006/09/02 15:36:42 fabiankeil - * Follow the OpenBSD port's lead and protect the resolve - * functions on OpenBSD as well. - * - * Revision 1.98 2006/08/24 11:01:34 fabiankeil - * --user fix. Only use the user as group if no group is specified. - * Solves BR 1492612. Thanks to Spinor S. and David Laight. - * - * Revision 1.97 2006/08/18 15:23:17 david__schmidt - * Windows service (re-)integration - * - * The new args are: - * - * --install[:service_name] - * --uninstall[:service_name] - * --service - * - * They work as follows: - * --install will create a service for you and then terminate. - * By default the service name will be "privoxy" (without the quotes). - * However you can run multiple services if you wish, just by adding - * a colon and then a name (no spaces). - * - * --uninstall follows the exact same rules a --install. - * - * --service is used when the program is executed by the service - * control manager, and in normal circumstances would never be - * used as a command line argument. - * - * Revision 1.96 2006/08/15 20:12:36 david__schmidt - * Windows service integration - * - * Revision 1.95 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work: -http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.94 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.92.2.16 2005/04/03 20:10:50 david__schmidt - * Thanks to Jindrich Makovicka for a race condition fix for the log - * file. The race condition remains for non-pthread implementations. - * Reference patch #1175720. - * - * Revision 1.92.2.15 2004/10/03 12:53:32 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.92.2.14 2003/12/12 12:52:53 oes - * - Fixed usage info for non-unix platforms - * - Fixed small cmdline parsing bug - * - * Revision 1.92.2.13 2003/11/27 19:20:27 oes - * Diagnostics: Now preserve the returncode of pthread_create - * in errno. Closes BR #775721. Thanks to Geoffrey Hausheer. - * - * Revision 1.92.2.12 2003/07/11 11:34:19 oes - * No longer ignore SIGCHLD. Fixes bug #769381 - * - * Revision 1.92.2.11 2003/05/14 12:32:02 oes - * Close jarfile on graceful exit, remove stray line - * - * Revision 1.92.2.10 2003/05/08 15:13:46 oes - * Cosmetics: Killed a warning, a typo and an allocation left at exit - * - * Revision 1.92.2.9 2003/04/03 15:08:42 oes - * No longer rely on non-POSIX.1 extensions of getcwd(). - * Fixes bug #711001 - * - * Revision 1.92.2.8 2003/03/31 13:12:32 oes - * Replaced setenv() by posix-compliant putenv() - * Thanks to Neil McCalden (nmcc AT users.sf.net) - * - * Revision 1.92.2.7 2003/03/17 16:48:59 oes - * Added chroot ability, thanks to patch by Sviatoslav Sviridov - * - * Revision 1.92.2.6 2003/03/11 11:55:00 oes - * Clean-up and extension of improvements for forked mode: - * - Child's return code now consists of flags RC_FLAG_* - * - Reporting toggle to parent now properly #ifdef'ed - * - Children now report blocking to parent. This enables - * statistics in forked mode - * - * Revision 1.92.2.5 2003/03/10 23:45:32 oes - * Fixed bug #700381: Non-Threaded version now capable of being toggled. - * Children now report having been toggled through _exit(17), parents - * watch for that code and toggle themselves if found. - * - * Revision 1.92.2.4 2003/03/07 03:41:04 david__schmidt - * Wrapping all *_r functions (the non-_r versions of them) with - * mutex semaphores for OSX. Hopefully this will take care of all - * of those pesky crash reports. - * - * Revision 1.92.2.3 2003/02/28 12:53:06 oes - * Fixed two mostly harmless mem leaks - * - * Revision 1.92.2.2 2002/11/20 14:37:47 oes - * Fix: Head of global clients list now initialized to NULL - * - * Revision 1.92.2.1 2002/09/25 14:52:24 oes - * Added basic support for OPTIONS and TRACE HTTP methods: - * - New interceptor direct_response() added in chat(). - * - sed() moved to earlier in the process, so that the - * Host: header is evaluated before actions and forwarding - * are decided on. - * - * Revision 1.92 2002/05/08 16:00:46 oes - * Chat's buffer handling: - * - Fixed bug with unchecked out-of-mem conditions - * while reading client request & server headers - * - No longer predict if the buffer limit will be exceeded - * in the next read -- check add_to_iob's new - * return code. If buffer couldn't be extended - * (policy or out-of-mem) while - * - reading from client: abort - * - reading server headers: send error page - * - buffering server body for filter: flush, - * and if that fails: send error page - * - * Revision 1.91 2002/04/08 20:35:58 swa - * fixed JB spelling - * - * Revision 1.90 2002/04/02 14:57:28 oes - * Made sending wafers independent of FEATURE_COOKIE_JAR - * - * Revision 1.89 2002/03/31 17:18:59 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.88 2002/03/27 14:32:43 david__schmidt - * More compiler warning message maintenance - * - * Revision 1.87 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.86 2002/03/25 17:04:55 david__schmidt - * Workaround for closing the jarfile before load_config() comes around again - * - * Revision 1.85 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.84 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.83 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.82 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.81 2002/03/12 01:42:50 oes - * Introduced modular filters - * - * Revision 1.80 2002/03/11 22:07:05 david__schmidt - * OS/2 port maintenance: - * - Fixed EMX build - it had decayed a little - * - Fixed inexplicable crash during FD_ZERO - must be due to a bad macro. - * substituted a memset for now. - * - * Revision 1.79 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.78 2002/03/08 21:35:04 oes - * Added optional group supplement to --user option. Will now use default group of user if no group given - * - * Revision 1.77 2002/03/07 03:52:06 oes - * - Fixed compiler warnings etc - * - Improved handling of failed DNS lookups - * - * Revision 1.76 2002/03/06 22:54:35 jongfoster - * Automated function-comment nitpicking. - * - * Revision 1.75 2002/03/06 10:02:19 oes - * Fixed stupid bug when --user was not given - * - * Revision 1.74 2002/03/06 00:49:31 jongfoster - * Fixing warning on Windows - * Making #ifdefs that refer to the same variable consistently - * use #ifdef unix rather than mixing #ifdef unix & #ifndef OS2 - * - * Revision 1.73 2002/03/05 23:57:30 hal9 - * Stray character 's' on line 1618 was breaking build. - * - * Revision 1.72 2002/03/05 21:33:45 david__schmidt - * - Re-enable OS/2 building after new parms were added - * - Fix false out of memory report when resolving CGI templates when no IP - * address is available of failed attempt (a la no such domain) - * - * Revision 1.71 2002/03/05 18:13:56 oes - * Added --user option - * - * Revision 1.70 2002/03/05 04:52:42 oes - * Deleted non-errlog debugging code - * - * Revision 1.69 2002/03/04 23:50:00 jongfoster - * Splitting off bind_port() call into bind_port_helper(), with - * improved logging. - * - * Revision 1.68 2002/03/04 20:17:32 oes - * Fixed usage info - * - * Revision 1.67 2002/03/04 18:18:57 oes - * - Removed _DEBUG mode - * - Cleand up cmdline parsing - * - Introduced --no-daemon, --pidfile options - * - Cleaned up signal handling: - * - Terminate cleanly on INT, TERM and ABRT - * - Schedule logfile for re-opening on HUP - * - Ignore CHLD and PIPE - * - Leave the rest with their default handlers - * - Uniform handler registration - * - Added usage() function - * - Played styleguide police - * - * Revision 1.66 2002/03/03 15:06:55 oes - * Re-enabled automatic config reloading - * - * Revision 1.65 2002/03/03 14:49:11 oes - * Fixed CLF logging: Now uses client's original HTTP request - * - * Revision 1.64 2002/03/03 09:18:03 joergs - * Made jumbjuster work on AmigaOS again. - * - * Revision 1.63 2002/03/02 04:14:50 david__schmidt - * Clean up a little CRLF unpleasantness that suddenly appeared - * - * Revision 1.62 2002/02/20 23:17:23 jongfoster - * Detecting some out-of memory conditions and exiting with a log message. - * - * Revision 1.61 2002/01/17 21:01:52 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Revision 1.60 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.59 2001/12/13 14:07:18 oes - * Fixed Bug: 503 error page now sent OK - * - * Revision 1.58 2001/11/30 23:37:24 jongfoster - * Renaming the Win32 config file to config.txt - this is almost the - * same as the corresponding UNIX name "config" - * - * Revision 1.57 2001/11/16 00:47:43 jongfoster - * Changing the tty-disconnection code to use setsid(). - * - * Revision 1.56 2001/11/13 20:20:54 jongfoster - * Tabs->spaces, fixing a bug with missing {} around an if() - * - * Revision 1.55 2001/11/13 20:14:53 jongfoster - * Patch for FreeBSD setpgrp() as suggested by Alexander Lazic - * - * Revision 1.54 2001/11/07 00:03:14 steudten - * Give reliable return value if an error - * occurs not just 0 with new daemon mode. - * - * Revision 1.53 2001/11/05 21:41:43 steudten - * Add changes to be a real daemon just for unix os. - * (change cwd to /, detach from controlling tty, set - * process group and session leader to the own process. - * Add DBG() Macro. - * Add some fatal-error log message for failed malloc(). - * Add '-d' if compiled with 'configure --with-debug' to - * enable debug output. - * - * Revision 1.52 2001/10/26 20:11:20 jongfoster - * Fixing type mismatch - * - * Revision 1.51 2001/10/26 17:38:28 oes - * Cosmetics - * - * Revision 1.50 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.49 2001/10/23 21:41:35 jongfoster - * Added call to initialize the (statically-allocated of course) - * "out of memory" CGI response. - * - * Revision 1.48 2001/10/10 19:56:46 jongfoster - * Moving some code that wasn't cookie-related out of an #ifdef - * FEATURE_COOKIE_JAR - * - * Revision 1.47 2001/10/10 16:44:36 oes - * Added CONNECT destination port limitation check - * - * Revision 1.46 2001/10/08 15:17:41 oes - * Re-enabled SSL forwarding - * - * Revision 1.45 2001/10/07 15:42:11 oes - * Replaced 6 boolean members of csp with one bitmap (csp->flags) - * - * Moved downgrading of the HTTP version from parse_http_request to - * chat(), since we can't decide if it is necessary before we have - * determined the actions for the URL. The HTTP command is now - * *always* re-built so the repairs need no longer be special-cased. - * - * filter_popups now gets a csp pointer so it can raise the new - * CSP_FLAG_MODIFIED flag. - * - * Bugfix - * - * Added configurable size limit for the IOB. If the IOB grows so - * large that the next read would exceed the limit, the header - * is generated, and the header & unfiltered buffer are flushed - * to the client. Chat then continues in non-buffering, - * non-filtering body mode. - * - * Revision 1.44 2001/10/02 18:13:57 oes - * Ooops - * - * Revision 1.43 2001/10/02 15:32:13 oes - * Moved generation of hdr - * - * Revision 1.42 2001/09/21 23:02:02 david__schmidt - * Cleaning up 2 compiler warnings on OS/2. - * - * Revision 1.41 2001/09/16 17:05:14 jongfoster - * Removing unused #include showarg.h - * - * Revision 1.40 2001/09/16 15:41:45 jongfoster - * Fixing signed/unsigned comparison warning. - * - * Revision 1.39 2001/09/16 13:21:27 jongfoster - * Changes to use new list functions. - * - * Revision 1.38 2001/09/16 13:01:46 jongfoster - * Removing redundant function call that zeroed zalloc()'d memory. - * - * Revision 1.37 2001/09/10 11:12:24 oes - * Deleted unused variable - * - * Revision 1.36 2001/09/10 10:56:15 oes - * Silenced compiler warnings - * - * Revision 1.35 2001/07/31 14:44:22 oes - * Deleted unused size parameter from filter_popups() - * - * Revision 1.34 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.33 2001/07/29 19:32:00 jongfoster - * Renaming _main() [mingw32 only] to real_main(), for ANSI compliance. - * - * Revision 1.32 2001/07/29 18:47:05 jongfoster - * Adding missing #include "loadcfg.h" - * - * Revision 1.31 2001/07/29 12:17:48 oes - * Applied pthread fix by Paul Lieverse - * - * Revision 1.30 2001/07/25 22:57:13 jongfoster - * __BEOS__ no longer overrides FEATURE_PTHREAD. - * This is because FEATURE_PTHREAD will soon be widely used, so I - * want to keep it simple. - * - * Revision 1.29 2001/07/24 12:47:06 oes - * Applied BeOS support update by Eugenia - * - * Revision 1.28 2001/07/23 13:26:12 oes - * Fixed bug in popup-killing for the first read that caused binary garbage to be sent between headers and body - * - * Revision 1.27 2001/07/19 19:09:47 haroon - * - Added code to take care of the situation where while processing the first - * server response (which includes the server header), after finding the end - * of the headers we were not looking past the end of the headers for - * content modification. I enabled it for filter_popups. - * Someone else should look to see if other similar operations should be - * done to the discarded portion of the buffer. - * - * Note 2001/07/20: No, the other content modification mechanisms will process - * the whole iob later anyway. --oes - * - * Revision 1.26 2001/07/18 12:31:36 oes - * cosmetics - * - * Revision 1.25 2001/07/15 19:43:49 jongfoster - * Supports POSIX threads. - * Also removed some unused #includes. - * - * Revision 1.24 2001/07/13 14:00:40 oes - * - Generic content modification scheme: - * Each feature has its own applicability flag that is set - * from csp->action->flags. - * Replaced the "filtering" int flag , by a function pointer - * "content_filter" to the function that will do the content - * modification. If it is != NULL, the document will be buffered - * and processed through *content_filter, which must set - * csp->content_length and return a modified copy of the body - * or return NULL (on failiure). - * - Changed csp->is_text to the more generic bitmap csp->content_type - * which can currently take the valued CT_TEXT or CT_GIF - * - Reformatting etc - * - Removed all #ifdef PCRS - * - * Revision 1.23 2001/07/02 02:28:25 iwanttokeepanon - * Added "#ifdef ACL_FILES" conditional compilation to line 1291 to exclude - * the `block_acl' call. This prevents a compilation error when the user - * does not wish to use the "ACL" feature. - * - * Revision 1.22 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.21 2001/06/29 13:29:36 oes - * - Cleaned up, improved comments - * - Unified all possible interceptors (CGI, - * block, trust, fast_redirect) in one - * place, with one (CGI) answer generation - * mechansim. Much clearer now. - * - Removed the GIF image generation, which - * is now done in filters.c:block_url() - * - Made error conditions like domain lookup - * failiure or (various) problems while talking - * to the server use cgi.c:error_response() - * instead of generating HTML/HTTP in chat() (yuck!) - * - Removed logentry from cancelled commit - * - * Revision 1.20 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.19 2001/06/07 23:12:52 jongfoster - * Replacing function pointer in struct gateway with a directly - * called function forwarded_connect(). - * Replacing struct gateway with struct forward_spec - * - * Revision 1.18 2001/06/03 19:12:16 oes - * introduced new cgi handling - * - * Revision 1.17 2001/06/01 20:07:23 jongfoster - * Now uses action +image-blocker{} rather than config->tinygif - * - * Revision 1.16 2001/06/01 18:49:17 jongfoster - * Replaced "list_share" with "list" - the tiny memory gain was not - * worth the extra complexity. - * - * Revision 1.15 2001/05/31 21:24:47 jongfoster - * Changed "permission" to "action" throughout. - * Removed DEFAULT_USER_AGENT - it must now be specified manually. - * Moved vanilla wafer check into chat(), since we must now - * decide whether or not to add it based on the URL. - * - * Revision 1.14 2001/05/29 20:14:01 joergs - * AmigaOS bugfix: PCRS needs a lot of stack, stacksize for child threads - * increased. - * - * Revision 1.13 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.12 2001/05/27 22:17:04 oes - * - * - re_process_buffer no longer writes the modified buffer - * to the client, which was very ugly. It now returns the - * buffer, which it is then written by chat. - * - * - content_length now adjusts the Content-Length: header - * for modified documents rather than crunch()ing it. - * (Length info in csp->content_length, which is 0 for - * unmodified documents) - * - * - For this to work, sed() is called twice when filtering. - * - * Revision 1.11 2001/05/26 17:27:53 jongfoster - * Added support for CLF and fixed LOG_LEVEL_LOG. - * Also did CRLF->LF fix of my previous patch. - * - * Revision 1.10 2001/05/26 15:26:15 jongfoster - * ACL feature now provides more security by immediately dropping - * connections from untrusted hosts. - * - * Revision 1.9 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.8 2001/05/25 22:43:18 jongfoster - * Fixing minor memory leak and buffer overflow. - * - * Revision 1.7 2001/05/25 22:34:30 jongfoster - * Hard tabs->Spaces - * - * Revision 1.6 2001/05/23 00:13:58 joergs - * AmigaOS support fixed. - * - * Revision 1.5 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.4 2001/05/21 19:34:01 jongfoster - * Made failure to bind() a fatal error. - * - * Revision 1.3 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.2 2001/05/17 22:34:44 oes - * - Added hint on GIF char array generation to jcc.c - * - Cleaned CRLF's from the sources and related files - * - Repaired logging for REF and FRC - * - * Revision 1.1.1.1 2001/05/15 13:58:56 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <sys/types.h> -#include <stdlib.h> -#include <string.h> -#include <signal.h> -#include <fcntl.h> -#include <errno.h> -#include <assert.h> - -#ifdef _WIN32 -# ifndef FEATURE_PTHREAD -# ifndef STRICT -# define STRICT -# endif -# include <windows.h> -# include <process.h> -# endif /* ndef FEATURE_PTHREAD */ - -# include "win32.h" -# ifndef _WIN_CONSOLE -# include "w32log.h" -# endif /* ndef _WIN_CONSOLE */ -# include "w32svrapi.h" - -#else /* ifndef _WIN32 */ - -# if !defined (__OS2__) -# include <unistd.h> -# include <sys/wait.h> -# endif /* ndef __OS2__ */ -# include <sys/time.h> -# include <sys/stat.h> -# include <sys/ioctl.h> - -#ifdef sun -#include <sys/termios.h> -#endif /* sun */ - -#ifdef unix -#include <pwd.h> -#include <grp.h> -#endif - -# include <signal.h> - -# ifdef __BEOS__ -# include <socket.h> /* BeOS has select() for sockets only. */ -# include <OS.h> /* declarations for threads and stuff. */ -# endif - -# if defined(__EMX__) || defined(__OS2__) -# include <sys/select.h> /* OS/2/EMX needs a little help with select */ -# endif -# ifdef __OS2__ -#define INCL_DOS -# include <os2.h> -#define bzero(B,N) memset(B,0x00,n) -# endif - -# ifndef FD_ZERO -# include <select.h> -# endif - -#endif - -#include "project.h" -#include "list.h" -#include "jcc.h" -#include "filters.h" -#include "loaders.h" -#include "parsers.h" -#include "miscutil.h" -#include "errlog.h" -#include "jbsockets.h" -#include "gateway.h" -#include "actions.h" -#include "cgi.h" -#include "loadcfg.h" -#include "urlmatch.h" - -const char jcc_h_rcs[] = JCC_H_VERSION; -const char project_h_rcs[] = PROJECT_H_VERSION; - -int no_daemon = 0; -struct client_state clients[1]; -struct file_list files[1]; - -#ifdef FEATURE_STATISTICS -int urls_read = 0; /* total nr of urls read inc rejected */ -int urls_rejected = 0; /* total nr of urls rejected */ -#endif /* def FEATURE_STATISTICS */ - -#ifdef FEATURE_GRACEFUL_TERMINATION -int g_terminate = 0; -#endif - -#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA) -static void sig_handler(int the_signal); -#endif -static int client_protocol_is_unsupported(const struct client_state *csp, char *req); -static jb_err get_request_destination_elsewhere(struct client_state *csp, struct list *headers); -static jb_err get_server_headers(struct client_state *csp); -static const char *crunch_reason(const struct http_response *rsp); -static void send_crunch_response(const struct client_state *csp, struct http_response *rsp); -static char *get_request_line(struct client_state *csp); -static jb_err receive_client_request(struct client_state *csp); -static jb_err parse_client_request(struct client_state *csp); -static void build_request_line(struct client_state *csp, const struct forward_spec *fwd, char **request_line); -static jb_err change_request_destination(struct client_state *csp); -static void chat(struct client_state *csp); -static void serve(struct client_state *csp); -#if !defined(_WIN32) || defined(_WIN_CONSOLE) -static void usage(const char *myname); -#endif -static void initialize_mutexes(void); -static jb_socket bind_port_helper(struct configuration_spec *config); -static void listen_loop(void); - -#ifdef AMIGA -void serve(struct client_state *csp); -#else /* ifndef AMIGA */ -static void serve(struct client_state *csp); -#endif /* def AMIGA */ - -#ifdef __BEOS__ -static int32 server_thread(void *data); -#endif /* def __BEOS__ */ - -#ifdef _WIN32 -#define sleep(N) Sleep(((N) * 1000)) -#endif - -#ifdef __OS2__ -#define sleep(N) DosSleep(((N) * 100)) -#endif - -#ifdef MUTEX_LOCKS_AVAILABLE -/* - * XXX: Does the locking stuff really belong in this file? - */ -privoxy_mutex_t log_mutex; -privoxy_mutex_t log_init_mutex; -privoxy_mutex_t connection_reuse_mutex; - -#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) -privoxy_mutex_t resolver_mutex; -#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */ - -#ifndef HAVE_GMTIME_R -privoxy_mutex_t gmtime_mutex; -#endif /* ndef HAVE_GMTIME_R */ - -#ifndef HAVE_LOCALTIME_R -privoxy_mutex_t localtime_mutex; -#endif /* ndef HAVE_GMTIME_R */ - -#ifndef HAVE_RANDOM -privoxy_mutex_t rand_mutex; -#endif /* ndef HAVE_RANDOM */ - -#endif /* def MUTEX_LOCKS_AVAILABLE */ - -#if defined(unix) -const char *basedir = NULL; -const char *pidfile = NULL; -static int received_hup_signal = 0; -#endif /* defined unix */ - -/* HTTP snipplets. */ -static const char CSUCCEED[] = - "HTTP/1.0 200 Connection established\r\n" - "Proxy-Agent: Privoxy/" VERSION "\r\n\r\n"; - -static const char CHEADER[] = - "HTTP/1.0 400 Invalid header received from client\r\n" - "Proxy-Agent: Privoxy " VERSION "\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Invalid header received from client.\r\n"; - -static const char FTP_RESPONSE[] = - "HTTP/1.0 400 Invalid request received from client\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Invalid request. Privoxy doesn't support FTP.\r\n"; - -static const char GOPHER_RESPONSE[] = - "HTTP/1.0 400 Invalid request received from client\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Invalid request. Privoxy doesn't support gopher.\r\n"; - -/* XXX: should be a template */ -static const char MISSING_DESTINATION_RESPONSE[] = - "HTTP/1.0 400 Bad request received from client\r\n" - "Proxy-Agent: Privoxy " VERSION "\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Bad request. Privoxy was unable to extract the destination.\r\n"; - -/* XXX: should be a template */ -static const char NO_SERVER_DATA_RESPONSE[] = - "HTTP/1.0 502 Server or forwarder response empty\r\n" - "Proxy-Agent: Privoxy " VERSION "\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Empty server or forwarder response.\r\n" - "The connection has been closed but Privoxy didn't receive any data.\r\n"; - -/* XXX: should be a template */ -static const char INVALID_SERVER_HEADERS_RESPONSE[] = - "HTTP/1.0 502 Server or forwarder response invalid\r\n" - "Proxy-Agent: Privoxy " VERSION "\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Bad response. The server or forwarder response doesn't look like HTTP.\r\n"; - -#if 0 -/* XXX: should be a template */ -static const char NULL_BYTE_RESPONSE[] = - "HTTP/1.0 400 Bad request received from client\r\n" - "Proxy-Agent: Privoxy " VERSION "\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Bad request. Null byte(s) before end of request.\r\n"; -#endif - -/* XXX: should be a template */ -static const char MESSED_UP_REQUEST_RESPONSE[] = - "HTTP/1.0 400 Malformed request after rewriting\r\n" - "Proxy-Agent: Privoxy " VERSION "\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "Bad request. Messed up with header filters.\r\n"; - -/* XXX: should be a template */ -static const char CONNECTION_TIMEOUT_RESPONSE[] = - "HTTP/1.0 502 Connection timeout\r\n" - "Proxy-Agent: Privoxy " VERSION "\r\n" - "Content-Type: text/plain\r\n" - "Connection: close\r\n\r\n" - "The connection timed out.\r\n"; - -/* A function to crunch a response */ -typedef struct http_response *(*crunch_func_ptr)(struct client_state *); - -/* Crunch function flags */ -#define CF_NO_FLAGS 0 -/* Cruncher applies to forced requests as well */ -#define CF_IGNORE_FORCE 1 -/* Crunched requests are counted for the block statistics */ -#define CF_COUNT_AS_REJECT 2 - -/* A crunch function and its flags */ -struct cruncher -{ - const crunch_func_ptr cruncher; - const int flags; -}; - -static int crunch_response_triggered(struct client_state *csp, const struct cruncher crunchers[]); - -/* Complete list of cruncher functions */ -static const struct cruncher crunchers_all[] = { - { direct_response, CF_COUNT_AS_REJECT|CF_IGNORE_FORCE}, - { block_url, CF_COUNT_AS_REJECT }, -#ifdef FEATURE_TRUST - { trust_url, CF_COUNT_AS_REJECT }, -#endif /* def FEATURE_TRUST */ - { redirect_url, CF_NO_FLAGS }, - { dispatch_cgi, CF_IGNORE_FORCE}, - { NULL, 0 } -}; - -/* Light version, used after tags are applied */ -static const struct cruncher crunchers_light[] = { - { block_url, CF_COUNT_AS_REJECT }, - { redirect_url, CF_NO_FLAGS }, - { NULL, 0 } -}; - - -/* - * XXX: Don't we really mean - * - * #if defined(unix) - * - * here? - */ -#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA) -/********************************************************************* - * - * Function : sig_handler - * - * Description : Signal handler for different signals. - * Exit gracefully on TERM and INT - * or set a flag that will cause the errlog - * to be reopened by the main thread on HUP. - * - * Parameters : - * 1 : the_signal = the signal cause this function to call - * - * Returns : - - * - *********************************************************************/ -static void sig_handler(int the_signal) -{ - switch(the_signal) - { - case SIGTERM: - case SIGINT: - log_error(LOG_LEVEL_INFO, "exiting by signal %d .. bye", the_signal); -#if defined(unix) - if(pidfile) - { - unlink(pidfile); - } -#endif /* unix */ - exit(the_signal); - break; - - case SIGHUP: -#if defined(unix) - received_hup_signal = 1; -#endif - break; - - default: - /* - * We shouldn't be here, unless we catch signals - * in main() that we can't handle here! - */ - log_error(LOG_LEVEL_FATAL, "sig_handler: exiting on unexpected signal %d", the_signal); - } - return; - -} -#endif - - -/********************************************************************* - * - * Function : client_protocol_is_unsupported - * - * Description : Checks if the client used a known unsupported - * protocol and deals with it by sending an error - * response. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : req = the first request line send by the client - * - * Returns : TRUE if an error response has been generated, or - * FALSE if the request doesn't look invalid. - * - *********************************************************************/ -static int client_protocol_is_unsupported(const struct client_state *csp, char *req) -{ - /* - * If it's a FTP or gopher request, we don't support it. - * - * These checks are better than nothing, but they might - * not work in all configurations and some clients might - * have problems digesting the answer. - * - * They should, however, never cause more problems than - * Privoxy's old behaviour (returning the misleading HTML - * error message: - * - * "Could not resolve http://(ftp|gopher)://example.org"). - */ - if (!strncmpic(req, "GET ftp://", 10) || !strncmpic(req, "GET gopher://", 13)) - { - const char *response = NULL; - const char *protocol = NULL; - - if (!strncmpic(req, "GET ftp://", 10)) - { - response = FTP_RESPONSE; - protocol = "FTP"; - } - else - { - response = GOPHER_RESPONSE; - protocol = "GOPHER"; - } - log_error(LOG_LEVEL_ERROR, - "%s tried to use Privoxy as %s proxy: %s", - csp->ip_addr_str, protocol, req); - log_error(LOG_LEVEL_CLF, - "%s - - [%T] \"%s\" 400 0", csp->ip_addr_str, req); - freez(req); - write_socket(csp->cfd, response, strlen(response)); - - return TRUE; - } - - return FALSE; -} - - -/********************************************************************* - * - * Function : get_request_destination_elsewhere - * - * Description : If the client's request was redirected into - * Privoxy without the client's knowledge, - * the request line lacks the destination host. - * - * This function tries to get it elsewhere, - * provided accept-intercepted-requests is enabled. - * - * "Elsewhere" currently only means "Host: header", - * but in the future we may ask the redirecting - * packet filter to look the destination up. - * - * If the destination stays unknown, an error - * response is send to the client and headers - * are freed so that chat() can return directly. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : headers = a header list - * - * Returns : JB_ERR_OK if the destination is now known, or - * JB_ERR_PARSE if it isn't. - * - *********************************************************************/ -static jb_err get_request_destination_elsewhere(struct client_state *csp, struct list *headers) -{ - char *req; - - if (!(csp->config->feature_flags & RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS)) - { - log_error(LOG_LEVEL_ERROR, "%s's request: \'%s\' is invalid." - " Privoxy isn't configured to accept intercepted requests.", - csp->ip_addr_str, csp->http->cmd); - /* XXX: Use correct size */ - log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 400 0", - csp->ip_addr_str, csp->http->cmd); - - write_socket(csp->cfd, CHEADER, strlen(CHEADER)); - destroy_list(headers); - - return JB_ERR_PARSE; - } - else if (JB_ERR_OK == get_destination_from_headers(headers, csp->http)) - { - /* Split the domain we just got for pattern matching */ - init_domain_components(csp->http); - - return JB_ERR_OK; - } - else - { - /* We can't work without destination. Go spread the news.*/ - - req = list_to_text(headers); - chomp(req); - /* XXX: Use correct size */ - log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 400 0", - csp->ip_addr_str, csp->http->cmd); - log_error(LOG_LEVEL_ERROR, - "Privoxy was unable to get the destination for %s's request:\n%s\n%s", - csp->ip_addr_str, csp->http->cmd, req); - freez(req); - - write_socket(csp->cfd, MISSING_DESTINATION_RESPONSE, strlen(MISSING_DESTINATION_RESPONSE)); - destroy_list(headers); - - return JB_ERR_PARSE; - } - /* - * TODO: If available, use PF's ioctl DIOCNATLOOK as last resort - * to get the destination IP address, use it as host directly - * or do a reverse DNS lookup first. - */ -} - - -/********************************************************************* - * - * Function : get_server_headers - * - * Description : Parses server headers in iob and fills them - * into csp->headers so that they can later be - * handled by sed(). - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK if everything went fine, or - * JB_ERR_PARSE if the headers were incomplete. - * - *********************************************************************/ -static jb_err get_server_headers(struct client_state *csp) -{ - int continue_hack_in_da_house = 0; - char * header; - - while (((header = get_header(csp->iob)) != NULL) || continue_hack_in_da_house) - { - if (header == NULL) - { - /* - * continue hack in da house. Ignore the ending of - * this head and continue enlisting header lines. - * The reason is described below. - */ - enlist(csp->headers, ""); - continue_hack_in_da_house = 0; - continue; - } - else if (0 == strncmpic(header, "HTTP/1.1 100", 12)) - { - /* - * It's a bodyless continue response, don't - * stop header parsing after reaching its end. - * - * As a result Privoxy will concatenate the - * next response's head and parse and deliver - * the headers as if they belonged to one request. - * - * The client will separate them because of the - * empty line between them. - * - * XXX: What we're doing here is clearly against - * the intended purpose of the continue header, - * and under some conditions (HTTP/1.0 client request) - * it's a standard violation. - * - * Anyway, "sort of against the spec" is preferable - * to "always getting confused by Continue responses" - * (Privoxy's behaviour before this hack was added) - */ - log_error(LOG_LEVEL_HEADER, "Continue hack in da house."); - continue_hack_in_da_house = 1; - } - else if (*header == '\0') - { - /* - * If the header is empty, but the Continue hack - * isn't active, we can assume that we reached the - * end of the buffer before we hit the end of the - * head. - * - * Inform the caller an let it decide how to handle it. - */ - return JB_ERR_PARSE; - } - - if (JB_ERR_MEMORY == enlist(csp->headers, header)) - { - /* - * XXX: Should we quit the request and return a - * out of memory error page instead? - */ - log_error(LOG_LEVEL_ERROR, - "Out of memory while enlisting server headers. %s lost.", - header); - } - freez(header); - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : crunch_reason - * - * Description : Translates the crunch reason code into a string. - * - * Parameters : - * 1 : rsp = a http_response - * - * Returns : A string with the crunch reason or an error description. - * - *********************************************************************/ -static const char *crunch_reason(const struct http_response *rsp) -{ - char * reason = NULL; - - assert(rsp != NULL); - if (rsp == NULL) - { - return "Internal error while searching for crunch reason"; - } - - switch (rsp->reason) - { - case RSP_REASON_UNSUPPORTED: - reason = "Unsupported HTTP feature"; - break; - case RSP_REASON_BLOCKED: - reason = "Blocked"; - break; - case RSP_REASON_UNTRUSTED: - reason = "Untrusted"; - break; - case RSP_REASON_REDIRECTED: - reason = "Redirected"; - break; - case RSP_REASON_CGI_CALL: - reason = "CGI Call"; - break; - case RSP_REASON_NO_SUCH_DOMAIN: - reason = "DNS failure"; - break; - case RSP_REASON_FORWARDING_FAILED: - reason = "Forwarding failed"; - break; - case RSP_REASON_CONNECT_FAILED: - reason = "Connection failure"; - break; - case RSP_REASON_OUT_OF_MEMORY: - reason = "Out of memory (may mask other reasons)"; - break; - default: - reason = "No reason recorded"; - break; - } - - return reason; -} - - -/********************************************************************* - * - * Function : send_crunch_response - * - * Description : Delivers already prepared response for - * intercepted requests, logs the interception - * and frees the response. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 1 : rsp = Fully prepared response. Will be freed on exit. - * - * Returns : Nothing. - * - *********************************************************************/ -static void send_crunch_response(const struct client_state *csp, struct http_response *rsp) -{ - const struct http_request *http = csp->http; - char status_code[4]; - - assert(rsp != NULL); - assert(rsp->head != NULL); - - if (rsp == NULL) - { - /* - * Not supposed to happen. If it does - * anyway, treat it as an unknown error. - */ - cgi_error_unknown(csp, rsp, RSP_REASON_INTERNAL_ERROR); - /* return code doesn't matter */ - } - - if (rsp == NULL) - { - /* If rsp is still NULL, we have serious internal problems. */ - log_error(LOG_LEVEL_FATAL, - "NULL response in send_crunch_response and cgi_error_unknown failed as well."); - } - - /* - * Extract the status code from the actual head - * that was send to the client. It is the only - * way to get it right for all requests, including - * the fixed ones for out-of-memory problems. - * - * A head starts like this: 'HTTP/1.1 200...' - * 0123456789|11 - * 10 - */ - status_code[0] = rsp->head[9]; - status_code[1] = rsp->head[10]; - status_code[2] = rsp->head[11]; - status_code[3] = '\0'; - - /* Write the answer to the client */ - if (write_socket(csp->cfd, rsp->head, rsp->head_length) - || write_socket(csp->cfd, rsp->body, rsp->content_length)) - { - /* There is nothing we can do about it. */ - log_error(LOG_LEVEL_ERROR, "write to: %s failed: %E", csp->http->host); - } - - /* Log that the request was crunched and why. */ - log_error(LOG_LEVEL_CRUNCH, "%s: %s", crunch_reason(rsp), http->url); - log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" %s %u", - csp->ip_addr_str, http->ocmd, status_code, rsp->content_length); - - /* Clean up and return */ - if (cgi_error_memory() != rsp) - { - free_http_response(rsp); - } - return; -} - - -#if 0 -/********************************************************************* - * - * Function : request_contains_null_bytes - * - * Description : Checks for NULL bytes in the request and sends - * an error message to the client if any were found. - * - * XXX: currently not used, see comment in chat(). - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : buf = Data from the client's request to check. - * 3 : len = The data length. - * - * Returns : TRUE if the request contained one or more NULL bytes, or - * FALSE otherwise. - * - *********************************************************************/ -static int request_contains_null_bytes(const struct client_state *csp, char *buf, int len) -{ - size_t c_len; /* Request lenght when treated as C string */ - - c_len = strlen(buf); - - if (c_len < len) - { - /* - * Null byte(s) found. Log the request, - * return an error response and hang up. - */ - size_t tmp_len = c_len; - - do - { - /* - * Replace NULL byte(s) with '°' characters - * so the request can be logged as string. - * XXX: Is there a better replacement character? - */ - buf[tmp_len]='°'; - tmp_len += strlen(buf+tmp_len); - } while (tmp_len < len); - - log_error(LOG_LEVEL_ERROR, "%s\'s request contains at least one NULL byte " - "(length=%d, strlen=%u).", csp->ip_addr_str, len, c_len); - log_error(LOG_LEVEL_HEADER, - "Offending request data with NULL bytes turned into \'°\' characters: %s", buf); - - write_socket(csp->cfd, NULL_BYTE_RESPONSE, strlen(NULL_BYTE_RESPONSE)); - - /* XXX: Log correct size */ - log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request\" 400 0", csp->ip_addr_str); - - return TRUE; - } - - return FALSE; -} -#endif - - -/********************************************************************* - * - * Function : crunch_response_triggered - * - * Description : Checks if the request has to be crunched, - * and delivers the crunch response if necessary. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : crunchers = list of cruncher functions to run - * - * Returns : TRUE if the request was answered with a crunch response - * FALSE otherwise. - * - *********************************************************************/ -static int crunch_response_triggered(struct client_state *csp, const struct cruncher crunchers[]) -{ - struct http_response *rsp = NULL; - const struct cruncher *c; - - /* - * If CGI request crunching is disabled, - * check the CGI dispatcher out of order to - * prevent unintentional blocks or redirects. - */ - if (!(csp->config->feature_flags & RUNTIME_FEATURE_CGI_CRUNCHING) - && (NULL != (rsp = dispatch_cgi(csp)))) - { - /* Deliver, log and free the interception response. */ - send_crunch_response(csp, rsp); - return TRUE; - } - - for (c = crunchers; c->cruncher != NULL; c++) - { - /* - * Check the cruncher if either Privoxy is toggled - * on and the request isn't forced, or if the cruncher - * applies to forced requests as well. - */ - if (((csp->flags & CSP_FLAG_TOGGLED_ON) && - !(csp->flags & CSP_FLAG_FORCED)) || - (c->flags & CF_IGNORE_FORCE)) - { - rsp = c->cruncher(csp); - if (NULL != rsp) - { - /* Deliver, log and free the interception response. */ - send_crunch_response(csp, rsp); -#ifdef FEATURE_STATISTICS - if (c->flags & CF_COUNT_AS_REJECT) - { - csp->flags |= CSP_FLAG_REJECTED; - } -#endif /* def FEATURE_STATISTICS */ - - return TRUE; - } - } - } - - return FALSE; -} - - -/********************************************************************* - * - * Function : build_request_line - * - * Description : Builds the HTTP request line. - * - * If a HTTP forwarder is used it expects the whole URL, - * web servers only get the path. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : fwd = The forwarding spec used for the request - * XXX: Should use http->fwd instead. - * 3 : request_line = The old request line which will be replaced. - * - * Returns : Nothing. Terminates in case of memory problems. - * - *********************************************************************/ -static void build_request_line(struct client_state *csp, const struct forward_spec *fwd, char **request_line) -{ - struct http_request *http = csp->http; - - assert(http->ssl == 0); - - /* - * Downgrade http version from 1.1 to 1.0 - * if +downgrade action applies. - */ - if ( (csp->action->flags & ACTION_DOWNGRADE) - && (!strcmpic(http->ver, "HTTP/1.1"))) - { - freez(http->ver); - http->ver = strdup("HTTP/1.0"); - - if (http->ver == NULL) - { - log_error(LOG_LEVEL_FATAL, "Out of memory downgrading HTTP version"); - } - } - - /* - * Rebuild the request line. - */ - freez(*request_line); - *request_line = strdup(http->gpc); - string_append(request_line, " "); - - if (fwd->forward_host) - { - string_append(request_line, http->url); - } - else - { - string_append(request_line, http->path); - } - string_append(request_line, " "); - string_append(request_line, http->ver); - - if (*request_line == NULL) - { - log_error(LOG_LEVEL_FATAL, "Out of memory writing HTTP command"); - } - log_error(LOG_LEVEL_HEADER, "New HTTP Request-Line: %s", *request_line); -} - - -/********************************************************************* - * - * Function : change_request_destination - * - * Description : Parse a (rewritten) request line and regenerate - * the http request data. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : Forwards the parse_http_request() return code. - * Terminates in case of memory problems. - * - *********************************************************************/ -static jb_err change_request_destination(struct client_state *csp) -{ - struct http_request *http = csp->http; - jb_err err; - - log_error(LOG_LEVEL_INFO, "Rewrite detected: %s", csp->headers->first->str); - free_http_request(http); - err = parse_http_request(csp->headers->first->str, http); - if (JB_ERR_OK != err) - { - log_error(LOG_LEVEL_ERROR, "Couldn't parse rewritten request: %s.", - jb_err_to_string(err)); - } - else - { - /* XXX: ocmd is a misleading name */ - http->ocmd = strdup(http->cmd); - if (http->ocmd == NULL) - { - log_error(LOG_LEVEL_FATAL, - "Out of memory copying rewritten HTTP request line"); - } - } - - return err; -} - - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE -/********************************************************************* - * - * Function : server_response_is_complete - * - * Description : Determines whether we should stop reading - * from the server socket. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : content_length = Length of content received so far. - * - * Returns : TRUE if the response is complete, - * FALSE otherwise. - * - *********************************************************************/ -static int server_response_is_complete(struct client_state *csp, - unsigned long long content_length) -{ - int content_length_known = !!(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET); - - if (!strcmpic(csp->http->gpc, "HEAD")) - { - /* - * "HEAD" implies no body, we are thus expecting - * no content. XXX: incomplete "list" of methods? - */ - csp->expected_content_length = 0; - content_length_known = TRUE; - } - - if (csp->http->status == 304) - { - /* - * Expect no body. XXX: incomplete "list" of status codes? - */ - csp->expected_content_length = 0; - content_length_known = TRUE; - } - - return (content_length_known && ((0 == csp->expected_content_length) - || (csp->expected_content_length <= content_length))); -} - - -/********************************************************************* - * - * Function : wait_for_alive_connections - * - * Description : Waits for alive connections to timeout. - * - * Parameters : N/A - * - * Returns : N/A - * - *********************************************************************/ -static void wait_for_alive_connections() -{ - int connections_alive = close_unusable_connections(); - - while (0 < connections_alive) - { - log_error(LOG_LEVEL_CONNECT, - "Waiting for %d connections to timeout.", - connections_alive); - sleep(60); - connections_alive = close_unusable_connections(); - } - - log_error(LOG_LEVEL_CONNECT, "No connections to wait for left."); - -} -#endif /* FEATURE_CONNECTION_KEEP_ALIVE */ - - -/********************************************************************* - * - * Function : mark_server_socket_tainted - * - * Description : Makes sure we don't reuse a server socket - * (if we didn't read everything the server sent - * us reusing the socket would lead to garbage). - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : void. - * - *********************************************************************/ -static void mark_server_socket_tainted(struct client_state *csp) -{ - if ((csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE)) - { - log_error(LOG_LEVEL_CONNECT, "Unsetting keep-alive flag."); - csp->flags &= ~CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE; - } -} - -/********************************************************************* - * - * Function : get_request_line - * - * Description : Read the client request line. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : Pointer to request line or NULL in case of errors. - * - *********************************************************************/ -static char *get_request_line(struct client_state *csp) -{ - char buf[BUFFER_SIZE]; - char *request_line = NULL; - int len; - - memset(buf, 0, sizeof(buf)); - - do - { - if (!data_is_available(csp->cfd, csp->config->socket_timeout)) - { - log_error(LOG_LEVEL_ERROR, - "Stopped waiting for the request line."); - write_socket(csp->cfd, CONNECTION_TIMEOUT_RESPONSE, - strlen(CONNECTION_TIMEOUT_RESPONSE)); - return NULL; - } - - len = read_socket(csp->cfd, buf, sizeof(buf) - 1); - - if (len <= 0) return NULL; - - /* - * If there is no memory left for buffering the - * request, there is nothing we can do but hang up - */ - if (add_to_iob(csp, buf, len)) - { - return NULL; - } - - request_line = get_header(csp->iob); - - } while ((NULL != request_line) && ('\0' == *request_line)); - - return request_line; - -} - - -/********************************************************************* - * - * Function : receive_client_request - * - * Description : Read the client's request (more precisely the - * client headers) and answer it if necessary. - * - * Note that since we're not using select() we could get - * blocked here if a client connected, then didn't say - * anything! - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK, JB_ERR_PARSE or JB_ERR_MEMORY - * - *********************************************************************/ -static jb_err receive_client_request(struct client_state *csp) -{ - char buf[BUFFER_SIZE]; - char *p; - char *req = NULL; - struct http_request *http; - int len; - jb_err err; - - /* Temporary copy of the client's headers before they get enlisted in csp->headers */ - struct list header_list; - struct list *headers = &header_list; - - http = csp->http; - - memset(buf, 0, sizeof(buf)); - - req = get_request_line(csp); - if (req == NULL) - { - return JB_ERR_PARSE; - } - assert(*req != '\0'); - - if (client_protocol_is_unsupported(csp, req)) - { - return JB_ERR_PARSE; - } - -#ifdef FEATURE_FORCE_LOAD - /* - * If this request contains the FORCE_PREFIX and blocks - * aren't enforced, get rid of it and set the force flag. - */ - if (strstr(req, FORCE_PREFIX)) - { - if (csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS) - { - log_error(LOG_LEVEL_FORCE, - "Ignored force prefix in request: \"%s\".", req); - } - else - { - strclean(req, FORCE_PREFIX); - log_error(LOG_LEVEL_FORCE, "Enforcing request: \"%s\".", req); - csp->flags |= CSP_FLAG_FORCED; - } - } -#endif /* def FEATURE_FORCE_LOAD */ - - err = parse_http_request(req, http); - freez(req); - if (JB_ERR_OK != err) - { - write_socket(csp->cfd, CHEADER, strlen(CHEADER)); - /* XXX: Use correct size */ - log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request\" 400 0", csp->ip_addr_str); - log_error(LOG_LEVEL_ERROR, - "Couldn't parse request line received from %s: %s", - csp->ip_addr_str, jb_err_to_string(err)); - - free_http_request(http); - return JB_ERR_PARSE; - } - - /* grab the rest of the client's headers */ - init_list(headers); - for (;;) - { - p = get_header(csp->iob); - - if (p == NULL) - { - /* There are no additional headers to read. */ - break; - } - - if (*p == '\0') - { - /* - * We didn't receive a complete header - * line yet, get the rest of it. - */ - if (!data_is_available(csp->cfd, csp->config->socket_timeout)) - { - log_error(LOG_LEVEL_ERROR, - "Stopped grabbing the client headers."); - return JB_ERR_PARSE; - } - - len = read_socket(csp->cfd, buf, sizeof(buf) - 1); - if (len <= 0) - { - log_error(LOG_LEVEL_ERROR, "read from client failed: %E"); - destroy_list(headers); - return JB_ERR_PARSE; - } - - if (add_to_iob(csp, buf, len)) - { - /* - * If there is no memory left for buffering the - * request, there is nothing we can do but hang up - */ - destroy_list(headers); - return JB_ERR_MEMORY; - } - } - else - { - /* - * We were able to read a complete - * header and can finaly enlist it. - */ - enlist(headers, p); - freez(p); - } - } - - if (http->host == NULL) - { - /* - * If we still don't know the request destination, - * the request is invalid or the client uses - * Privoxy without its knowledge. - */ - if (JB_ERR_OK != get_request_destination_elsewhere(csp, headers)) - { - /* - * Our attempts to get the request destination - * elsewhere failed or Privoxy is configured - * to only accept proxy requests. - * - * An error response has already been send - * and we're done here. - */ - return JB_ERR_PARSE; - } - } - - /* - * Determine the actions for this URL - */ -#ifdef FEATURE_TOGGLE - if (!(csp->flags & CSP_FLAG_TOGGLED_ON)) - { - /* Most compatible set of actions (i.e. none) */ - init_current_action(csp->action); - } - else -#endif /* ndef FEATURE_TOGGLE */ - { - get_url_actions(csp, http); - } - - /* - * Save a copy of the original request for logging - */ - http->ocmd = strdup(http->cmd); - if (http->ocmd == NULL) - { - log_error(LOG_LEVEL_FATAL, - "Out of memory copying HTTP request line"); - } - enlist(csp->headers, http->cmd); - - /* Append the previously read headers */ - list_append_list_unique(csp->headers, headers); - destroy_list(headers); - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : parse_client_request - * - * Description : Parses the client's request and decides what to do - * with it. - * - * Note that since we're not using select() we could get - * blocked here if a client connected, then didn't say - * anything! - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK or JB_ERR_PARSE - * - *********************************************************************/ -static jb_err parse_client_request(struct client_state *csp) -{ - struct http_request *http = csp->http; - jb_err err; - - err = sed(csp, FILTER_CLIENT_HEADERS); - if (JB_ERR_OK != err) - { - /* XXX: Should be handled in sed(). */ - assert(err == JB_ERR_PARSE); - log_error(LOG_LEVEL_FATAL, "Failed to parse client headers."); - } - csp->flags |= CSP_FLAG_CLIENT_HEADER_PARSING_DONE; - - /* Check request line for rewrites. */ - if ((NULL == csp->headers->first->str) - || (strcmp(http->cmd, csp->headers->first->str) && - (JB_ERR_OK != change_request_destination(csp)))) - { - /* - * A header filter broke the request line - bail out. - */ - write_socket(csp->cfd, MESSED_UP_REQUEST_RESPONSE, strlen(MESSED_UP_REQUEST_RESPONSE)); - /* XXX: Use correct size */ - log_error(LOG_LEVEL_CLF, - "%s - - [%T] \"Invalid request generated\" 500 0", csp->ip_addr_str); - log_error(LOG_LEVEL_ERROR, - "Invalid request line after applying header filters."); - free_http_request(http); - - return JB_ERR_PARSE; - } - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : chat - * - * Description : Once a connection to the client has been accepted, - * this function is called (via serve()) to handle the - * main business of the communication. When this - * function returns, the caller must close the client - * socket handle. - * - * FIXME: chat is nearly thousand lines long. - * Ridiculous. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : Nothing. - * - *********************************************************************/ -static void chat(struct client_state *csp) -{ - char buf[BUFFER_SIZE]; - char *hdr; - char *p; - fd_set rfds; - int n; - jb_socket maxfd; - int server_body; - int ms_iis5_hack = 0; - unsigned long long byte_count = 0; - int forwarded_connect_retries = 0; - int max_forwarded_connect_retries = csp->config->forwarded_connect_retries; - const struct forward_spec *fwd; - struct http_request *http; - long len = 0; /* for buffer sizes (and negative error codes) */ - - /* Function that does the content filtering for the current request */ - filter_function_ptr content_filter = NULL; - - /* Skeleton for HTTP response, if we should intercept the request */ - struct http_response *rsp; - struct timeval timeout; - - memset(buf, 0, sizeof(buf)); - - http = csp->http; - - if (receive_client_request(csp) != JB_ERR_OK) - { - return; - } - if (parse_client_request(csp) != JB_ERR_OK) - { - return; - } - - /* decide how to route the HTTP request */ - fwd = forward_url(csp, http); - if (NULL == fwd) - { - log_error(LOG_LEVEL_FATAL, "gateway spec is NULL!?!? This can't happen!"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - return; - } - - /* - * build the http request to send to the server - * we have to do one of the following: - * - * create = use the original HTTP request to create a new - * HTTP request that has either the path component - * without the http://domainspec (w/path) or the - * full orininal URL (w/url) - * Note that the path and/or the HTTP version may - * have been altered by now. - * - * connect = Open a socket to the host:port of the server - * and short-circuit server and client socket. - * - * pass = Pass the request unchanged if forwarding a CONNECT - * request to a parent proxy. Note that we'll be sending - * the CFAIL message ourselves if connecting to the parent - * fails, but we won't send a CSUCCEED message if it works, - * since that would result in a double message (ours and the - * parent's). After sending the request to the parent, we simply - * tunnel. - * - * here's the matrix: - * SSL - * 0 1 - * +--------+--------+ - * | | | - * 0 | create | connect| - * | w/path | | - * Forwarding +--------+--------+ - * | | | - * 1 | create | pass | - * | w/url | | - * +--------+--------+ - * - */ - - if (http->ssl && connect_port_is_forbidden(csp)) - { - const char *acceptable_connect_ports = - csp->action->string[ACTION_STRING_LIMIT_CONNECT]; - assert(NULL != acceptable_connect_ports); - log_error(LOG_LEVEL_INFO, "Request from %s marked for blocking. " - "limit-connect{%s} doesn't allow CONNECT requests to port %d.", - csp->ip_addr_str, acceptable_connect_ports, csp->http->port); - csp->action->flags |= ACTION_BLOCK; - http->ssl = 0; - } - - if (http->ssl == 0) - { - freez(csp->headers->first->str); - build_request_line(csp, fwd, &csp->headers->first->str); - } - - /* - * We have a request. Check if one of the crunchers wants it. - */ - if (crunch_response_triggered(csp, crunchers_all)) - { - /* - * Yes. The client got the crunch response - * and we are done here after cleaning up. - */ - /* XXX: why list_remove_all()? */ - list_remove_all(csp->headers); - - return; - } - - log_error(LOG_LEVEL_GPC, "%s%s", http->hostport, http->path); - - if (fwd->forward_host) - { - log_error(LOG_LEVEL_CONNECT, "via %s:%d to: %s", - fwd->forward_host, fwd->forward_port, http->hostport); - } - else - { - log_error(LOG_LEVEL_CONNECT, "to %s", http->hostport); - } - - /* here we connect to the server, gateway, or the forwarder */ - - while ((csp->sfd = forwarded_connect(fwd, http, csp)) - && (errno == EINVAL) - && (forwarded_connect_retries++ < max_forwarded_connect_retries)) - { - log_error(LOG_LEVEL_ERROR, - "failed request #%u to connect to %s. Trying again.", - forwarded_connect_retries, http->hostport); - } - - if (csp->sfd == JB_INVALID_SOCKET) - { - if (fwd->type != SOCKS_NONE) - { - /* Socks error. */ - rsp = error_response(csp, "forwarding-failed", errno); - } - else if (errno == EINVAL) - { - rsp = error_response(csp, "no-such-domain", errno); - } - else - { - rsp = error_response(csp, "connect-failed", errno); - log_error(LOG_LEVEL_CONNECT, "connect to: %s failed: %E", - http->hostport); - } - - /* Write the answer to the client */ - if (rsp != NULL) - { - send_crunch_response(csp, rsp); - } - - return; - } - - hdr = list_to_text(csp->headers); - if (hdr == NULL) - { - /* FIXME Should handle error properly */ - log_error(LOG_LEVEL_FATAL, "Out of memory parsing client header"); - } - list_remove_all(csp->headers); - - if (fwd->forward_host || (http->ssl == 0)) - { - /* - * Write the client's (modified) header to the server - * (along with anything else that may be in the buffer) - */ - if (write_socket(csp->sfd, hdr, strlen(hdr)) - || (flush_socket(csp->sfd, csp->iob) < 0)) - { - log_error(LOG_LEVEL_CONNECT, - "write header to: %s failed: %E", http->hostport); - - rsp = error_response(csp, "connect-failed", errno); - if (rsp) - { - send_crunch_response(csp, rsp); - } - - freez(hdr); - return; - } - } - else - { - /* - * We're running an SSL tunnel and we're not forwarding, - * so just send the "connect succeeded" message to the - * client, flush the rest, and get out of the way. - */ - if (write_socket(csp->cfd, CSUCCEED, strlen(CSUCCEED))) - { - freez(hdr); - return; - } - IOB_RESET(csp); - } - - log_error(LOG_LEVEL_CONNECT, "to %s successful", http->hostport); - - /* we're finished with the client's header */ - freez(hdr); - - maxfd = (csp->cfd > csp->sfd) ? csp->cfd : csp->sfd; - - /* pass data between the client and server - * until one or the other shuts down the connection. - */ - - server_body = 0; - - for (;;) - { -#ifdef __OS2__ - /* - * FD_ZERO here seems to point to an errant macro which crashes. - * So do this by hand for now... - */ - memset(&rfds,0x00,sizeof(fd_set)); -#else - FD_ZERO(&rfds); -#endif - FD_SET(csp->cfd, &rfds); - FD_SET(csp->sfd, &rfds); - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - if ((csp->flags & CSP_FLAG_CHUNKED) - && !(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET) - && ((csp->iob->eod - csp->iob->cur) >= 5) - && !memcmp(csp->iob->eod-5, "0\r\n\r\n", 5)) - { - log_error(LOG_LEVEL_CONNECT, - "Looks like we read the last chunk together with " - "the server headers. We better stop reading."); - byte_count = (unsigned long long)(csp->iob->eod - csp->iob->cur); - csp->expected_content_length = byte_count; - csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET; - } - if (server_body && server_response_is_complete(csp, byte_count)) - { - log_error(LOG_LEVEL_CONNECT, - "Done reading from server. Expected content length: %llu. " - "Actual content length: %llu. Most recently received: %d.", - csp->expected_content_length, byte_count, len); - len = 0; - /* - * XXX: should not jump around, - * chat() is complicated enough already. - */ - goto reading_done; - } -#endif /* FEATURE_CONNECTION_KEEP_ALIVE */ - - timeout.tv_sec = csp->config->socket_timeout; - timeout.tv_usec = 0; - n = select((int)maxfd+1, &rfds, NULL, NULL, &timeout); - - if (n == 0) - { - log_error(LOG_LEVEL_ERROR, - "Didn't receive data in time: %s", http->url); - if ((byte_count == 0) && (http->ssl == 0)) - { - write_socket(csp->cfd, CONNECTION_TIMEOUT_RESPONSE, - strlen(CONNECTION_TIMEOUT_RESPONSE)); - } - mark_server_socket_tainted(csp); - return; - } - else if (n < 0) - { - log_error(LOG_LEVEL_ERROR, "select() failed!: %E"); - mark_server_socket_tainted(csp); - return; - } - - /* - * This is the body of the browser's request, - * just read and write it. - */ - if (FD_ISSET(csp->cfd, &rfds)) - { - len = read_socket(csp->cfd, buf, sizeof(buf) - 1); - - if (len <= 0) - { - /* XXX: not sure if this is necessary. */ - mark_server_socket_tainted(csp); - break; /* "game over, man" */ - } - - if (write_socket(csp->sfd, buf, (size_t)len)) - { - log_error(LOG_LEVEL_ERROR, "write to: %s failed: %E", http->host); - mark_server_socket_tainted(csp); - return; - } - continue; - } - - /* - * The server wants to talk. It could be the header or the body. - * If `hdr' is null, then it's the header otherwise it's the body. - * FIXME: Does `hdr' really mean `host'? No. - */ - if (FD_ISSET(csp->sfd, &rfds)) - { - fflush(0); - len = read_socket(csp->sfd, buf, sizeof(buf) - 1); - - if (len < 0) - { - log_error(LOG_LEVEL_ERROR, "read from: %s failed: %E", http->host); - - if (http->ssl && (fwd->forward_host == NULL)) - { - /* - * Just hang up. We already confirmed the client's CONNECT - * request with status code 200 and unencrypted content is - * no longer welcome. - */ - log_error(LOG_LEVEL_ERROR, - "CONNECT already confirmed. Unable to tell the client about the problem."); - return; - } - else if (byte_count) - { - /* - * Just hang up. We already transmitted the original headers - * and parts of the original content and therefore missed the - * chance to send an error message (without risking data corruption). - * - * XXX: we could retry with a fancy range request here. - */ - log_error(LOG_LEVEL_ERROR, "Already forwarded the original headers. " - "Unable to tell the client about the problem."); - mark_server_socket_tainted(csp); - return; - } - - rsp = error_response(csp, "connect-failed", errno); - if (rsp) - { - send_crunch_response(csp, rsp); - } - - return; - } - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - if (csp->flags & CSP_FLAG_CHUNKED) - { - if ((len >= 5) && !memcmp(buf+len-5, "0\r\n\r\n", 5)) - { - /* XXX: this is a temporary hack */ - log_error(LOG_LEVEL_CONNECT, - "Looks like we reached the end of the last chunk. " - "We better stop reading."); - csp->expected_content_length = byte_count + (unsigned long long)len; - csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET; - } - } - reading_done: -#endif /* FEATURE_CONNECTION_KEEP_ALIVE */ - - /* - * Add a trailing zero to let be able to use string operations. - * XXX: do we still need this with filter_popups gone? - */ - buf[len] = '\0'; - - /* - * Normally, this would indicate that we've read - * as much as the server has sent us and we can - * close the client connection. However, Microsoft - * in its wisdom has released IIS/5 with a bug that - * prevents it from sending the trailing \r\n in - * a 302 redirect header (and possibly other headers). - * To work around this if we've haven't parsed - * a full header we'll append a trailing \r\n - * and see if this now generates a valid one. - * - * This hack shouldn't have any impacts. If we've - * already transmitted the header or if this is a - * SSL connection, then we won't bother with this - * hack. So we only work on partially received - * headers. If we append a \r\n and this still - * doesn't generate a valid header, then we won't - * transmit anything to the client. - */ - if (len == 0) - { - - if (server_body || http->ssl) - { - /* - * If we have been buffering up the document, - * now is the time to apply content modification - * and send the result to the client. - */ - if (content_filter) - { - p = execute_content_filter(csp, content_filter); - /* - * If the content filter fails, use the original - * buffer and length. - * (see p != NULL ? p : csp->iob->cur below) - */ - if (NULL == p) - { - csp->content_length = (size_t)(csp->iob->eod - csp->iob->cur); - } - - if (JB_ERR_OK != update_server_headers(csp)) - { - log_error(LOG_LEVEL_FATAL, - "Failed to update server headers. after filtering."); - } - - hdr = list_to_text(csp->headers); - if (hdr == NULL) - { - /* FIXME Should handle error properly */ - log_error(LOG_LEVEL_FATAL, "Out of memory parsing server header"); - } - - if (write_socket(csp->cfd, hdr, strlen(hdr)) - || write_socket(csp->cfd, - ((p != NULL) ? p : csp->iob->cur), (size_t)csp->content_length)) - { - log_error(LOG_LEVEL_ERROR, "write modified content to client failed: %E"); - freez(hdr); - freez(p); - mark_server_socket_tainted(csp); - return; - } - - freez(hdr); - freez(p); - } - - break; /* "game over, man" */ - } - - /* - * This is NOT the body, so - * Let's pretend the server just sent us a blank line. - */ - snprintf(buf, sizeof(buf), "\r\n"); - len = (int)strlen(buf); - - /* - * Now, let the normal header parsing algorithm below do its - * job. If it fails, we'll exit instead of continuing. - */ - - ms_iis5_hack = 1; - } - - /* - * If this is an SSL connection or we're in the body - * of the server document, just write it to the client, - * unless we need to buffer the body for later content-filtering - */ - if (server_body || http->ssl) - { - if (content_filter) - { - /* - * If there is no memory left for buffering the content, or the buffer limit - * has been reached, switch to non-filtering mode, i.e. make & write the - * header, flush the iob and buf, and get out of the way. - */ - if (add_to_iob(csp, buf, len)) - { - size_t hdrlen; - long flushed; - - log_error(LOG_LEVEL_INFO, - "Flushing header and buffers. Stepping back from filtering."); - - hdr = list_to_text(csp->headers); - if (hdr == NULL) - { - /* - * Memory is too tight to even generate the header. - * Send our static "Out-of-memory" page. - */ - log_error(LOG_LEVEL_ERROR, "Out of memory while trying to flush."); - rsp = cgi_error_memory(); - send_crunch_response(csp, rsp); - mark_server_socket_tainted(csp); - return; - } - hdrlen = strlen(hdr); - - if (write_socket(csp->cfd, hdr, hdrlen) - || ((flushed = flush_socket(csp->cfd, csp->iob)) < 0) - || (write_socket(csp->cfd, buf, (size_t)len))) - { - log_error(LOG_LEVEL_CONNECT, - "Flush header and buffers to client failed: %E"); - freez(hdr); - mark_server_socket_tainted(csp); - return; - } - - /* - * Reset the byte_count to the amount of bytes - * we just flushed. len will be added a few lines below, - * hdrlen doesn't matter for LOG_LEVEL_CLF. - */ - byte_count = (unsigned long long)flushed; - freez(hdr); - content_filter = NULL; - server_body = 1; - } - } - else - { - if (write_socket(csp->cfd, buf, (size_t)len)) - { - log_error(LOG_LEVEL_ERROR, "write to client failed: %E"); - mark_server_socket_tainted(csp); - return; - } - } - byte_count += (unsigned long long)len; - continue; - } - else - { - const char *header_start; - /* - * We're still looking for the end of the server's header. - * Buffer up the data we just read. If that fails, there's - * little we can do but send our static out-of-memory page. - */ - if (add_to_iob(csp, buf, len)) - { - log_error(LOG_LEVEL_ERROR, "Out of memory while looking for end of server headers."); - rsp = cgi_error_memory(); - send_crunch_response(csp, rsp); - mark_server_socket_tainted(csp); - return; - } - - header_start = csp->iob->cur; - - /* Convert iob into something sed() can digest */ - if (JB_ERR_PARSE == get_server_headers(csp)) - { - if (ms_iis5_hack) - { - /* - * Well, we tried our MS IIS/5 hack and it didn't work. - * The header is incomplete and there isn't anything - * we can do about it. - */ - log_error(LOG_LEVEL_INFO, - "MS IIS5 hack didn't produce valid headers."); - break; - } - else - { - /* - * Since we have to wait for more from the server before - * we can parse the headers we just continue here. - */ - long header_offset = csp->iob->cur - header_start; - assert(csp->iob->cur >= header_start); - byte_count += (unsigned long long)(len - header_offset); - log_error(LOG_LEVEL_CONNECT, "Continuing buffering headers. " - "byte_count: %llu. header_offset: %d. len: %d.", - byte_count, header_offset, len); - continue; - } - } - - /* Did we actually get anything? */ - if (NULL == csp->headers->first) - { - log_error(LOG_LEVEL_ERROR, "Empty server or forwarder response."); - log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd); - write_socket(csp->cfd, NO_SERVER_DATA_RESPONSE, strlen(NO_SERVER_DATA_RESPONSE)); - free_http_request(http); - mark_server_socket_tainted(csp); - return; - } - - assert(csp->headers->first->str); - assert(!http->ssl); - if (strncmpic(csp->headers->first->str, "HTTP", 4) && - strncmpic(csp->headers->first->str, "ICY", 3)) - { - /* - * It doesn't look like a HTTP (or Shoutcast) response: - * tell the client and log the problem. - */ - if (strlen(csp->headers->first->str) > 30) - { - csp->headers->first->str[30] = '\0'; - } - log_error(LOG_LEVEL_ERROR, - "Invalid server or forwarder response. Starts with: %s", - csp->headers->first->str); - log_error(LOG_LEVEL_CLF, - "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd); - write_socket(csp->cfd, INVALID_SERVER_HEADERS_RESPONSE, - strlen(INVALID_SERVER_HEADERS_RESPONSE)); - free_http_request(http); - mark_server_socket_tainted(csp); - return; - } - - /* - * We have now received the entire server header, - * filter it and send the result to the client - */ - if (JB_ERR_OK != sed(csp, FILTER_SERVER_HEADERS)) - { - log_error(LOG_LEVEL_FATAL, "Failed to parse server headers."); - } - hdr = list_to_text(csp->headers); - if (hdr == NULL) - { - /* FIXME Should handle error properly */ - log_error(LOG_LEVEL_FATAL, "Out of memory parsing server header"); - } - - if (crunch_response_triggered(csp, crunchers_light)) - { - /* - * One of the tags created by a server-header - * tagger triggered a crunch. We already - * delivered the crunch response to the client - * and are done here after cleaning up. - */ - freez(hdr); - mark_server_socket_tainted(csp); - return; - } - /* Buffer and pcrs filter this if appropriate. */ - - if (!http->ssl) /* We talk plaintext */ - { - content_filter = get_filter_function(csp); - } - /* - * Only write if we're not buffering for content modification - */ - if (!content_filter) - { - /* - * Write the server's (modified) header to - * the client (along with anything else that - * may be in the buffer) - */ - - if (write_socket(csp->cfd, hdr, strlen(hdr)) - || ((len = flush_socket(csp->cfd, csp->iob)) < 0)) - { - log_error(LOG_LEVEL_CONNECT, "write header to client failed: %E"); - - /* - * The write failed, so don't bother mentioning it - * to the client... it probably can't hear us anyway. - */ - freez(hdr); - mark_server_socket_tainted(csp); - return; - } - - byte_count += (unsigned long long)len; - } - else - { - /* - * XXX: the header lenght should probably - * be calculated by get_server_headers(). - */ - long header_length = csp->iob->cur - header_start; - assert(csp->iob->cur > header_start); - byte_count += (unsigned long long)(len - header_length); - } - - /* we're finished with the server's header */ - - freez(hdr); - server_body = 1; - - /* - * If this was a MS IIS/5 hack then it means the server - * has already closed the connection. Nothing more to read. - * Time to bail. - */ - if (ms_iis5_hack) - { - log_error(LOG_LEVEL_INFO, - "Closed server connection detected with MS IIS5 hack enabled."); - break; - } - } - continue; - } - mark_server_socket_tainted(csp); - return; /* huh? we should never get here */ - } - - if (csp->content_length == 0) - { - /* - * If Privoxy didn't recalculate the Content-Lenght, - * byte_count is still correct. - */ - csp->content_length = byte_count; - } - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - if ((csp->flags & CSP_FLAG_CONTENT_LENGTH_SET) - && (csp->expected_content_length != byte_count)) - { - log_error(LOG_LEVEL_CONNECT, - "Received %llu bytes while expecting %llu.", - byte_count, csp->expected_content_length); - mark_server_socket_tainted(csp); - } -#endif - - log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 200 %llu", - csp->ip_addr_str, http->ocmd, csp->content_length); -} - - -/********************************************************************* - * - * Function : serve - * - * Description : This is little more than chat. We only "serve" to - * to close any socket that chat may have opened. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : N/A - * - *********************************************************************/ -#ifdef AMIGA -void serve(struct client_state *csp) -#else /* ifndef AMIGA */ -static void serve(struct client_state *csp) -#endif /* def AMIGA */ -{ - chat(csp); - close_socket(csp->cfd); - - if (csp->sfd != JB_INVALID_SOCKET) - { -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - static int monitor_thread_running = 0; - - if ((csp->config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE) - && (csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE)) - { - remember_connection(csp->sfd, csp->http, forward_url(csp, csp->http)); - privoxy_mutex_lock(&connection_reuse_mutex); - if (!monitor_thread_running) - { - monitor_thread_running = 1; - privoxy_mutex_unlock(&connection_reuse_mutex); - wait_for_alive_connections(); - privoxy_mutex_lock(&connection_reuse_mutex); - monitor_thread_running = 0; - } - privoxy_mutex_unlock(&connection_reuse_mutex); - } - else - { - forget_connection(csp->sfd); - close_socket(csp->sfd); - } -#else - close_socket(csp->sfd); -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - } - - csp->flags &= ~CSP_FLAG_ACTIVE; - -} - - -#ifdef __BEOS__ -/********************************************************************* - * - * Function : server_thread - * - * Description : We only exist to call `serve' in a threaded environment. - * - * Parameters : - * 1 : data = Current client state (buffers, headers, etc...) - * - * Returns : Always 0. - * - *********************************************************************/ -static int32 server_thread(void *data) -{ - serve((struct client_state *) data); - return 0; - -} -#endif - - -#if !defined(_WIN32) || defined(_WIN_CONSOLE) -/********************************************************************* - * - * Function : usage - * - * Description : Print usage info & exit. - * - * Parameters : Pointer to argv[0] for identifying ourselves - * - * Returns : No. ,-) - * - *********************************************************************/ -static void usage(const char *myname) -{ - printf("Privoxy version " VERSION " (" HOME_PAGE_URL ")\n" - "Usage: %s " -#if defined(unix) - "[--chroot] " -#endif /* defined(unix) */ - "[--help] " -#if defined(unix) - "[--no-daemon] [--pidfile pidfile] [--pre-chroot-nslookup hostname] [--user user[.group]] " -#endif /* defined(unix) */ - "[--version] [configfile]\n" - "Aborting\n", myname); - - exit(2); - -} -#endif /* #if !defined(_WIN32) || defined(_WIN_CONSOLE) */ - - -#ifdef MUTEX_LOCKS_AVAILABLE -/********************************************************************* - * - * Function : privoxy_mutex_lock - * - * Description : Locks a mutex. - * - * Parameters : - * 1 : mutex = The mutex to lock. - * - * Returns : Void. May exit in case of errors. - * - *********************************************************************/ -void privoxy_mutex_lock(privoxy_mutex_t *mutex) -{ -#ifdef FEATURE_PTHREAD - int err = pthread_mutex_lock(mutex); - if (err) - { - if (mutex != &log_mutex) - { - log_error(LOG_LEVEL_FATAL, - "Mutex locking failed: %s.\n", strerror(err)); - } - exit(1); - } -#else - EnterCriticalSection(mutex); -#endif /* def FEATURE_PTHREAD */ -} - - -/********************************************************************* - * - * Function : privoxy_mutex_unlock - * - * Description : Unlocks a mutex. - * - * Parameters : - * 1 : mutex = The mutex to unlock. - * - * Returns : Void. May exit in case of errors. - * - *********************************************************************/ -void privoxy_mutex_unlock(privoxy_mutex_t *mutex) -{ -#ifdef FEATURE_PTHREAD - int err = pthread_mutex_unlock(mutex); - if (err) - { - if (mutex != &log_mutex) - { - log_error(LOG_LEVEL_FATAL, - "Mutex unlocking failed: %s.\n", strerror(err)); - } - exit(1); - } -#else - LeaveCriticalSection(mutex); -#endif /* def FEATURE_PTHREAD */ -} - - -/********************************************************************* - * - * Function : privoxy_mutex_init - * - * Description : Prepares a mutex. - * - * Parameters : - * 1 : mutex = The mutex to initialize. - * - * Returns : Void. May exit in case of errors. - * - *********************************************************************/ -static void privoxy_mutex_init(privoxy_mutex_t *mutex) -{ -#ifdef FEATURE_PTHREAD - int err = pthread_mutex_init(mutex, 0); - if (err) - { - printf("Fatal error. Mutex initialization failed: %s.\n", - strerror(err)); - exit(1); - } -#else - InitializeCriticalSection(mutex); -#endif /* def FEATURE_PTHREAD */ -} -#endif /* def MUTEX_LOCKS_AVAILABLE */ - -/********************************************************************* - * - * Function : initialize_mutexes - * - * Description : Prepares mutexes if mutex support is available. - * - * Parameters : None - * - * Returns : Void, exits in case of errors. - * - *********************************************************************/ -static void initialize_mutexes(void) -{ -#ifdef MUTEX_LOCKS_AVAILABLE - /* - * Prepare global mutex semaphores - */ - privoxy_mutex_init(&log_mutex); - privoxy_mutex_init(&log_init_mutex); - privoxy_mutex_init(&connection_reuse_mutex); - - /* - * XXX: The assumptions below are a bit naive - * and can cause locks that aren't necessary. - * - * For example older FreeBSD versions (< 6.x?) - * have no gethostbyname_r, but gethostbyname is - * thread safe. - */ -#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) - privoxy_mutex_init(&resolver_mutex); -#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */ - /* - * XXX: should we use a single mutex for - * localtime() and gmtime() as well? - */ -#ifndef HAVE_GMTIME_R - privoxy_mutex_init(&gmtime_mutex); -#endif /* ndef HAVE_GMTIME_R */ - -#ifndef HAVE_LOCALTIME_R - privoxy_mutex_init(&localtime_mutex); -#endif /* ndef HAVE_GMTIME_R */ - -#ifndef HAVE_RANDOM - privoxy_mutex_init(&rand_mutex); -#endif /* ndef HAVE_RANDOM */ -#endif /* def MUTEX_LOCKS_AVAILABLE */ -} - - -/********************************************************************* - * - * Function : main - * - * Description : Load the config file and start the listen loop. - * This function is a lot more *sane* with the `load_config' - * and `listen_loop' functions; although it stills does - * a *little* too much for my taste. - * - * Parameters : - * 1 : argc = Number of parameters (including $0). - * 2 : argv = Array of (char *)'s to the parameters. - * - * Returns : 1 if : can't open config file, unrecognized directive, - * stats requested in multi-thread mode, can't open the - * log file, can't open the jar file, listen port is invalid, - * any load fails, and can't bind port. - * - * Else main never returns, the process must be signaled - * to terminate execution. Or, on Windows, use the - * "File", "Exit" menu option. - * - *********************************************************************/ -#ifdef __MINGW32__ -int real_main(int argc, const char *argv[]) -#else -int main(int argc, const char *argv[]) -#endif -{ - int argc_pos = 0; - unsigned int random_seed; -#ifdef unix - struct passwd *pw = NULL; - struct group *grp = NULL; - char *p; - int do_chroot = 0; - char *pre_chroot_nslookup_to_load_resolver = NULL; -#endif - - Argc = argc; - Argv = argv; - - configfile = -#if !defined(_WIN32) - "config" -#else - "config.txt" -#endif - ; - - /* Prepare mutexes if supported and necessary. */ - initialize_mutexes(); - - /* Enable logging until further notice. */ - init_log_module(); - - /* - * Parse the command line arguments - * - * XXX: simply printing usage information in case of - * invalid arguments isn't particularly user friendly. - */ - while (++argc_pos < argc) - { -#ifdef _WIN32 - /* Check to see if the service must be installed or uninstalled */ - if (strncmp(argv[argc_pos], "--install", 9) == 0) - { - const char *pName = argv[argc_pos] + 9; - if (*pName == ':') - pName++; - exit( (install_service(pName)) ? 0 : 1 ); - } - else if (strncmp(argv[argc_pos], "--uninstall", + 11) == 0) - { - const char *pName = argv[argc_pos] + 11; - if (*pName == ':') - pName++; - exit((uninstall_service(pName)) ? 0 : 1); - } - else if (strcmp(argv[argc_pos], "--service" ) == 0) - { - bRunAsService = TRUE; - w32_set_service_cwd(); - atexit(w32_service_exit_notify); - } - else -#endif /* defined(_WIN32) */ - - -#if !defined(_WIN32) || defined(_WIN_CONSOLE) - - if (strcmp(argv[argc_pos], "--help") == 0) - { - usage(argv[0]); - } - - else if(strcmp(argv[argc_pos], "--version") == 0) - { - printf("Privoxy version " VERSION " (" HOME_PAGE_URL ")\n"); - exit(0); - } - -#if defined(unix) - - else if (strcmp(argv[argc_pos], "--no-daemon" ) == 0) - { - set_debug_level(LOG_LEVEL_FATAL | LOG_LEVEL_ERROR | LOG_LEVEL_INFO); - no_daemon = 1; - } - - else if (strcmp(argv[argc_pos], "--pidfile" ) == 0) - { - if (++argc_pos == argc) usage(argv[0]); - pidfile = strdup(argv[argc_pos]); - } - - else if (strcmp(argv[argc_pos], "--user" ) == 0) - { - if (++argc_pos == argc) usage(argv[argc_pos]); - - if ((NULL != (p = strchr(argv[argc_pos], '.'))) && *(p + 1) != '0') - { - *p++ = '\0'; - if (NULL == (grp = getgrnam(p))) - { - log_error(LOG_LEVEL_FATAL, "Group %s not found.", p); - } - } - - if (NULL == (pw = getpwnam(argv[argc_pos]))) - { - log_error(LOG_LEVEL_FATAL, "User %s not found.", argv[argc_pos]); - } - - if (p != NULL) *--p = '\0'; - } - - else if (strcmp(argv[argc_pos], "--pre-chroot-nslookup" ) == 0) - { - if (++argc_pos == argc) usage(argv[0]); - pre_chroot_nslookup_to_load_resolver = strdup(argv[argc_pos]); - } - - else if (strcmp(argv[argc_pos], "--chroot" ) == 0) - { - do_chroot = 1; - } -#endif /* defined(unix) */ - - else if (argc_pos + 1 != argc) - { - /* - * This is neither the last command line - * option, nor was it recognized before, - * therefore it must be invalid. - */ - usage(argv[0]); - } - else - -#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */ - { - configfile = argv[argc_pos]; - } - - } /* -END- while (more arguments) */ - - show_version(Argv[0]); - -#if defined(unix) - if ( *configfile != '/' ) - { - char cwd[BUFFER_SIZE]; - char *abs_file; - size_t abs_file_size; - - /* make config-filename absolute here */ - if (NULL == getcwd(cwd, sizeof(cwd))) - { - perror("failed to get current working directory"); - exit( 1 ); - } - - /* XXX: why + 5? */ - abs_file_size = strlen(cwd) + strlen(configfile) + 5; - basedir = strdup(cwd); - - if (NULL == basedir || - NULL == (abs_file = malloc(abs_file_size))) - { - perror("malloc failed"); - exit( 1 ); - } - strlcpy(abs_file, basedir, abs_file_size); - strlcat(abs_file, "/", abs_file_size ); - strlcat(abs_file, configfile, abs_file_size); - configfile = abs_file; - } -#endif /* defined unix */ - - - files->next = NULL; - clients->next = NULL; - - /* XXX: factor out initialising after the next stable release. */ -#ifdef AMIGA - InitAmiga(); -#elif defined(_WIN32) - InitWin32(); -#endif - - random_seed = (unsigned int)time(NULL); -#ifdef HAVE_RANDOM - srandom(random_seed); -#else - srand(random_seed); -#endif /* ifdef HAVE_RANDOM */ - - /* - * Unix signal handling - * - * Catch the abort, interrupt and terminate signals for a graceful exit - * Catch the hangup signal so the errlog can be reopened. - * Ignore the broken pipe signals (FIXME: Why?) - */ -#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA) -{ - int idx; - const int catched_signals[] = { SIGTERM, SIGINT, SIGHUP, 0 }; - const int ignored_signals[] = { SIGPIPE, 0 }; - - for (idx = 0; catched_signals[idx] != 0; idx++) - { -#ifdef sun /* FIXME: Is it safe to check for HAVE_SIGSET instead? */ - if (sigset(catched_signals[idx], sig_handler) == SIG_ERR) -#else - if (signal(catched_signals[idx], sig_handler) == SIG_ERR) -#endif /* ifdef sun */ - { - log_error(LOG_LEVEL_FATAL, "Can't set signal-handler for signal %d: %E", catched_signals[idx]); - } - } - - for (idx = 0; ignored_signals[idx] != 0; idx++) - { - if (signal(ignored_signals[idx], SIG_IGN) == SIG_ERR) - { - log_error(LOG_LEVEL_FATAL, "Can't set ignore-handler for signal %d: %E", ignored_signals[idx]); - } - } - -} -#else /* ifdef _WIN32 */ -# ifdef _WIN_CONSOLE - /* - * We *are* in a windows console app. - * Print a verbose messages about FAQ's and such - */ - printf("%s", win32_blurb); -# endif /* def _WIN_CONSOLE */ -#endif /* def _WIN32 */ - - - /* Initialize the CGI subsystem */ - cgi_init_error_messages(); - - /* - * If runnig on unix and without the --nodaemon - * option, become a daemon. I.e. fork, detach - * from tty and get process group leadership - */ -#if defined(unix) -{ - pid_t pid = 0; -#if 0 - int fd; -#endif - - if (!no_daemon) - { - pid = fork(); - - if ( pid < 0 ) /* error */ - { - perror("fork"); - exit( 3 ); - } - else if ( pid != 0 ) /* parent */ - { - int status; - pid_t wpid; - /* - * must check for errors - * child died due to missing files aso - */ - sleep( 1 ); - wpid = waitpid( pid, &status, WNOHANG ); - if ( wpid != 0 ) - { - exit( 1 ); - } - exit( 0 ); - } - /* child */ -#if 1 - /* Should be more portable, but not as well tested */ - setsid(); -#else /* !1 */ -#ifdef __FreeBSD__ - setpgrp(0,0); -#else /* ndef __FreeBSD__ */ - setpgrp(); -#endif /* ndef __FreeBSD__ */ - fd = open("/dev/tty", O_RDONLY); - if ( fd ) - { - /* no error check here */ - ioctl( fd, TIOCNOTTY,0 ); - close ( fd ); - } -#endif /* 1 */ - /* - * stderr (fd 2) will be closed later on, - * when the config file has been parsed. - */ - - close( 0 ); - close( 1 ); - chdir("/"); - - } /* -END- if (!no_daemon) */ - - /* - * As soon as we have written the PID file, we can switch - * to the user and group ID indicated by the --user option - */ - write_pid_file(); - - if (NULL != pw) - { - if (setgid((NULL != grp) ? grp->gr_gid : pw->pw_gid)) - { - log_error(LOG_LEVEL_FATAL, "Cannot setgid(): Insufficient permissions."); - } - if (NULL != grp) - { - if (setgroups(1, &grp->gr_gid)) - { - log_error(LOG_LEVEL_FATAL, "setgroups() failed: %E"); - } - } - else if (initgroups(pw->pw_name, pw->pw_gid)) - { - log_error(LOG_LEVEL_FATAL, "initgroups() failed: %E"); - } - if (do_chroot) - { - if (!pw->pw_dir) - { - log_error(LOG_LEVEL_FATAL, "Home directory for %s undefined", pw->pw_name); - } - /* Read the time zone file from /etc before doing chroot. */ - tzset(); - if (NULL != pre_chroot_nslookup_to_load_resolver - && '\0' != pre_chroot_nslookup_to_load_resolver[0]) - { - /* Initialize resolver library. */ - (void) resolve_hostname_to_ip(pre_chroot_nslookup_to_load_resolver); - } - if (chroot(pw->pw_dir) < 0) - { - log_error(LOG_LEVEL_FATAL, "Cannot chroot to %s", pw->pw_dir); - } - if (chdir ("/")) - { - log_error(LOG_LEVEL_FATAL, "Cannot chdir /"); - } - } - if (setuid(pw->pw_uid)) - { - log_error(LOG_LEVEL_FATAL, "Cannot setuid(): Insufficient permissions."); - } - if (do_chroot) - { - char putenv_dummy[64]; - - strlcpy(putenv_dummy, "HOME=/", sizeof(putenv_dummy)); - if (putenv(putenv_dummy) != 0) - { - log_error(LOG_LEVEL_FATAL, "Cannot putenv(): HOME"); - } - - snprintf(putenv_dummy, sizeof(putenv_dummy), "USER=%s", pw->pw_name); - if (putenv(putenv_dummy) != 0) - { - log_error(LOG_LEVEL_FATAL, "Cannot putenv(): USER"); - } - } - } - else if (do_chroot) - { - log_error(LOG_LEVEL_FATAL, "Cannot chroot without --user argument."); - } -} -#endif /* defined unix */ - -#ifdef _WIN32 - /* This will be FALSE unless the command line specified --service - */ - if (bRunAsService) - { - /* Yup, so now we must attempt to establish a connection - * with the service dispatcher. This will only work if this - * process was launched by the service control manager to - * actually run as a service. If this isn't the case, i've - * known it take around 30 seconds or so for the call to return. - */ - - /* The StartServiceCtrlDispatcher won't return until the service is stopping */ - if (w32_start_service_ctrl_dispatcher(w32ServiceDispatchTable)) - { - /* Service has run, and at this point is now being stopped, so just return */ - return 0; - } - -#ifdef _WIN_CONSOLE - printf("Warning: Failed to connect to Service Control Dispatcher\nwhen starting as a service!\n"); -#endif - /* An error occurred. Usually it's because --service was wrongly specified - * and we were unable to connect to the Service Control Dispatcher because - * it wasn't expecting us and is therefore not listening. - * - * For now, just continue below to call the listen_loop function. - */ - } -#endif /* def _WIN32 */ - - listen_loop(); - - /* NOTREACHED */ - return(-1); - -} - - -/********************************************************************* - * - * Function : bind_port_helper - * - * Description : Bind the listen port. Handles logging, and aborts - * on failure. - * - * Parameters : - * 1 : config = Privoxy configuration. Specifies port - * to bind to. - * - * Returns : Port that was opened. - * - *********************************************************************/ -static jb_socket bind_port_helper(struct configuration_spec * config) -{ - int result; - jb_socket bfd; - - if (config->haddr == NULL) - { - log_error(LOG_LEVEL_INFO, "Listening on port %d on all IP addresses", - config->hport); - } - else - { - log_error(LOG_LEVEL_INFO, "Listening on port %d on IP address %s", - config->hport, config->haddr); - } - - result = bind_port(config->haddr, config->hport, &bfd); - - if (result < 0) - { - switch(result) - { - case -3 : - log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: " - "There may be another Privoxy or some other " - "proxy running on port %d", - (NULL != config->haddr) ? config->haddr : "INADDR_ANY", - config->hport, config->hport); - - case -2 : - log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: " - "The hostname is not resolvable", - (NULL != config->haddr) ? config->haddr : "INADDR_ANY", config->hport); - - default : - log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: because %E", - (NULL != config->haddr) ? config->haddr : "INADDR_ANY", config->hport); - } - - /* shouldn't get here */ - return JB_INVALID_SOCKET; - } - - config->need_bind = 0; - - return bfd; -} - - -#ifdef _WIN32 -/* Without this simple workaround we get this compiler warning from _beginthread - * warning C4028: formal parameter 1 different from declaration - */ -void w32_service_listen_loop(void *p) -{ - listen_loop(); -} -#endif /* def _WIN32 */ - - -/********************************************************************* - * - * Function : listen_loop - * - * Description : bind the listen port and enter a "FOREVER" listening loop. - * - * Parameters : N/A - * - * Returns : Never. - * - *********************************************************************/ -static void listen_loop(void) -{ - struct client_state *csp = NULL; - jb_socket bfd; - struct configuration_spec * config; - - config = load_config(); - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - /* - * XXX: Should be relocated once it no - * longer needs to emit log messages. - */ - initialize_reusable_connections(); -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - - bfd = bind_port_helper(config); - -#ifdef FEATURE_GRACEFUL_TERMINATION - while (!g_terminate) -#else - for (;;) -#endif - { -#if !defined(FEATURE_PTHREAD) && !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__) - while (waitpid(-1, NULL, WNOHANG) > 0) - { - /* zombie children */ - } -#endif /* !defined(FEATURE_PTHREAD) && !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) */ - - /* - * Free data that was used by died threads - */ - sweep(); - -#if defined(unix) - /* - * Re-open the errlog after HUP signal - */ - if (received_hup_signal) - { - if (NULL != config->logfile) - { - init_error_log(Argv[0], config->logfile); - } - received_hup_signal = 0; - } -#endif - - if ( NULL == (csp = (struct client_state *) zalloc(sizeof(*csp))) ) - { - log_error(LOG_LEVEL_FATAL, "malloc(%d) for csp failed: %E", sizeof(*csp)); - continue; - } - - csp->flags |= CSP_FLAG_ACTIVE; - csp->sfd = JB_INVALID_SOCKET; - - csp->config = config = load_config(); - - if ( config->need_bind ) - { - /* - * Since we were listening to the "old port", we will not see - * a "listen" param change until the next IJB request. So, at - * least 1 more request must be made for us to find the new - * setting. I am simply closing the old socket and binding the - * new one. - * - * Which-ever is correct, we will serve 1 more page via the - * old settings. This should probably be a "show-proxy-args" - * request. This should not be a so common of an operation - * that this will hurt people's feelings. - */ - - close_socket(bfd); - - bfd = bind_port_helper(config); - } - - log_error(LOG_LEVEL_CONNECT, "Listening for new connections ... "); - - if (!accept_connection(csp, bfd)) - { - log_error(LOG_LEVEL_CONNECT, "accept failed: %E"); - -#ifdef AMIGA - if(!childs) - { - exit(1); - } -#endif - freez(csp); - continue; - } - else - { - log_error(LOG_LEVEL_CONNECT, "accepted connection from %s", csp->ip_addr_str); - } - -#ifdef FEATURE_TOGGLE - if (global_toggle_state) -#endif /* def FEATURE_TOGGLE */ - { - csp->flags |= CSP_FLAG_TOGGLED_ON; - } - - if (run_loader(csp)) - { - log_error(LOG_LEVEL_FATAL, "a loader failed - must exit"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - } - -#ifdef FEATURE_ACL - if (block_acl(NULL,csp)) - { - log_error(LOG_LEVEL_CONNECT, "Connection from %s dropped due to ACL", csp->ip_addr_str); - close_socket(csp->cfd); - freez(csp); - continue; - } -#endif /* def FEATURE_ACL */ - - /* add it to the list of clients */ - csp->next = clients->next; - clients->next = csp; - - if (config->multi_threaded) - { - int child_id; - -/* this is a switch () statment in the C preprocessor - ugh */ -#undef SELECTED_ONE_OPTION - -/* Use Pthreads in preference to native code */ -#if defined(FEATURE_PTHREAD) && !defined(SELECTED_ONE_OPTION) -#define SELECTED_ONE_OPTION - { - pthread_t the_thread; - pthread_attr_t attrs; - - pthread_attr_init(&attrs); - pthread_attr_setdetachstate(&attrs, PTHREAD_CREATE_DETACHED); - errno = pthread_create(&the_thread, &attrs, - (void * (*)(void *))serve, csp); - child_id = errno ? -1 : 0; - pthread_attr_destroy(&attrs); - } -#endif - -#if defined(_WIN32) && !defined(_CYGWIN) && !defined(SELECTED_ONE_OPTION) -#define SELECTED_ONE_OPTION - child_id = _beginthread( - (void (*)(void *))serve, - 64 * 1024, - csp); -#endif - -#if defined(__OS2__) && !defined(SELECTED_ONE_OPTION) -#define SELECTED_ONE_OPTION - child_id = _beginthread( - (void(* _Optlink)(void*))serve, - NULL, - 64 * 1024, - csp); -#endif - -#if defined(__BEOS__) && !defined(SELECTED_ONE_OPTION) -#define SELECTED_ONE_OPTION - { - thread_id tid = spawn_thread - (server_thread, "server", B_NORMAL_PRIORITY, csp); - - if ((tid >= 0) && (resume_thread(tid) == B_OK)) - { - child_id = (int) tid; - } - else - { - child_id = -1; - } - } -#endif - -#if defined(AMIGA) && !defined(SELECTED_ONE_OPTION) -#define SELECTED_ONE_OPTION - csp->cfd = ReleaseSocket(csp->cfd, -1); - -#ifdef __amigaos4__ - child_id = (int)CreateNewProcTags(NP_Entry, (ULONG)server_thread, - NP_Output, Output(), - NP_CloseOutput, FALSE, - NP_Name, (ULONG)"privoxy child", - NP_Child, TRUE, - TAG_DONE); -#else - child_id = (int)CreateNewProcTags(NP_Entry, (ULONG)server_thread, - NP_Output, Output(), - NP_CloseOutput, FALSE, - NP_Name, (ULONG)"privoxy child", - NP_StackSize, 200*1024, - TAG_DONE); -#endif - if(0 != child_id) - { - childs++; - ((struct Task *)child_id)->tc_UserData = csp; - Signal((struct Task *)child_id, SIGF_SINGLE); - Wait(SIGF_SINGLE); - } -#endif - -#if !defined(SELECTED_ONE_OPTION) - child_id = fork(); - - /* This block is only needed when using fork(). - * When using threads, the server thread was - * created and run by the call to _beginthread(). - */ - if (child_id == 0) /* child */ - { - int rc = 0; -#ifdef FEATURE_TOGGLE - int inherited_toggle_state = global_toggle_state; -#endif /* def FEATURE_TOGGLE */ - - serve(csp); - - /* - * If we've been toggled or we've blocked the request, tell Mom - */ - -#ifdef FEATURE_TOGGLE - if (inherited_toggle_state != global_toggle_state) - { - rc |= RC_FLAG_TOGGLED; - } -#endif /* def FEATURE_TOGGLE */ - -#ifdef FEATURE_STATISTICS - if (csp->flags & CSP_FLAG_REJECTED) - { - rc |= RC_FLAG_BLOCKED; - } -#endif /* ndef FEATURE_STATISTICS */ - - _exit(rc); - } - else if (child_id > 0) /* parent */ - { - /* in a fork()'d environment, the parent's - * copy of the client socket and the CSP - * are not used. - */ - int child_status; -#if !defined(_WIN32) && !defined(__CYGWIN__) - - wait( &child_status ); - - /* - * Evaluate child's return code: If the child has - * - been toggled, toggle ourselves - * - blocked its request, bump up the stats counter - */ - -#ifdef FEATURE_TOGGLE - if (WIFEXITED(child_status) && (WEXITSTATUS(child_status) & RC_FLAG_TOGGLED)) - { - global_toggle_state = !global_toggle_state; - } -#endif /* def FEATURE_TOGGLE */ - -#ifdef FEATURE_STATISTICS - urls_read++; - if (WIFEXITED(child_status) && (WEXITSTATUS(child_status) & RC_FLAG_BLOCKED)) - { - urls_rejected++; - } -#endif /* def FEATURE_STATISTICS */ - -#endif /* !defined(_WIN32) && defined(__CYGWIN__) */ - close_socket(csp->cfd); - csp->flags &= ~CSP_FLAG_ACTIVE; - } -#endif - -#undef SELECTED_ONE_OPTION -/* end of cpp switch () */ - - if (child_id < 0) /* failed */ - { - char buf[BUFFER_SIZE]; - - log_error(LOG_LEVEL_ERROR, "can't fork: %E"); - - snprintf(buf , sizeof(buf), "Privoxy: can't fork: errno = %d", errno); - - write_socket(csp->cfd, buf, strlen(buf)); - close_socket(csp->cfd); - csp->flags &= ~CSP_FLAG_ACTIVE; - sleep(5); - continue; - } - } - else - { - serve(csp); - } - } - - /* NOTREACHED unless FEATURE_GRACEFUL_TERMINATION is defined */ - - /* Clean up. Aim: free all memory (no leaks) */ -#ifdef FEATURE_GRACEFUL_TERMINATION - - log_error(LOG_LEVEL_ERROR, "Graceful termination requested"); - - unload_current_config_file(); - unload_current_actions_file(); - unload_current_re_filterfile(); -#ifdef FEATURE_TRUST - unload_current_trust_file(); -#endif - - if (config->multi_threaded) - { - int i = 60; - do - { - sleep(1); - sweep(); - } while ((clients->next != NULL) && (--i > 0)); - - if (i <= 0) - { - log_error(LOG_LEVEL_ERROR, "Graceful termination failed - still some live clients after 1 minute wait."); - } - } - sweep(); - sweep(); - -#if defined(unix) - freez(basedir); -#endif - freez(configfile); - -#if defined(_WIN32) && !defined(_WIN_CONSOLE) - /* Cleanup - remove taskbar icon etc. */ - TermLogWindow(); -#endif - - exit(0); -#endif /* FEATURE_GRACEFUL_TERMINATION */ - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/jcc.c.rej b/external/privoxy/jcc.c.rej deleted file mode 100644 index 7a1bbdc..0000000 --- a/external/privoxy/jcc.c.rej +++ /dev/null @@ -1,20 +0,0 @@ -*************** -*** 3110,3118 **** - } - continue; - } -- log_error(LOG_LEVEL_INFO, -- "Shouldn't get here but did."); -- return; - } - - if (csp->content_length == 0) ---- 3120,3127 ---- - } - continue; - } -+ mark_server_socket_tainted(csp); -+ return; /* huh? we should never get here */ - } - - if (csp->content_length == 0) diff --git a/external/privoxy/jcc.h b/external/privoxy/jcc.h deleted file mode 100644 index add854c..0000000 --- a/external/privoxy/jcc.h +++ /dev/null @@ -1,261 +0,0 @@ -#ifndef JCC_H_INCLUDED -#define JCC_H_INCLUDED -#define JCC_H_VERSION "$Id: jcc.h,v 1.25 2008/10/09 18:21:41 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/jcc.h,v $ - * - * Purpose : Main file. Contains main() method, main loop, and - * the main connection-handling function. - * - * Copyright : Written by and Copyright (C) 2001-2006 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: jcc.h,v $ - * Revision 1.25 2008/10/09 18:21:41 fabiankeil - * Flush work-in-progress changes to keep outgoing connections - * alive where possible. Incomplete and mostly #ifdef'd out. - * - * Revision 1.24 2008/09/07 12:35:05 fabiankeil - * Add mutex lock support for _WIN32. - * - * Revision 1.23 2008/09/04 08:13:58 fabiankeil - * Prepare for critical sections on Windows by adding a - * layer of indirection before the pthread mutex functions. - * - * Revision 1.22 2007/06/01 18:16:36 fabiankeil - * Use the same mutex for gethostbyname() and gethostbyaddr() to prevent - * deadlocks and crashes on OpenBSD and possibly other OS with neither - * gethostbyname_r() nor gethostaddr_r(). Closes BR#1729174. - * Thanks to Ralf Horstmann for report and solution. - * - * Revision 1.21 2007/04/22 13:18:06 fabiankeil - * Keep the HTTP snippets local. - * - * Revision 1.20 2006/12/26 17:31:41 fabiankeil - * Mutex protect rand() if POSIX threading - * is used, warn the user if that's not possible - * and stop using it on _WIN32 where it could - * cause crashes. - * - * Revision 1.19 2006/12/06 19:41:39 fabiankeil - * Privoxy is now able to run as intercepting - * proxy in combination with any packet filter - * that does the port redirection. The destination - * is extracted from the "Host:" header which - * should be available for nearly all requests. - * - * Moved HTTP snipplets into jcc.c. - * Added error message for gopher proxy requests. - * - * Revision 1.18 2006/11/13 19:05:51 fabiankeil - * Make pthread mutex locking more generic. Instead of - * checking for OSX and OpenBSD, check for FEATURE_PTHREAD - * and use mutex locking unless there is an _r function - * available. Better safe than sorry. - * - * Fixes "./configure --disable-pthread" and should result - * in less threading-related problems on pthread-using platforms, - * but it still doesn't fix BR#1122404. - * - * Revision 1.17 2006/11/06 19:58:23 fabiankeil - * Move pthread.h inclusion from jcc.c to jcc.h. - * Fixes build on x86-freebsd1 (FreeBSD 5.4-RELEASE). - * - * Revision 1.16 2006/09/02 15:36:42 fabiankeil - * Follow the OpenBSD port's lead and protect the resolve - * functions on OpenBSD as well. - * - * Revision 1.15 2006/09/02 10:24:30 fabiankeil - * Include pthread.h for OpenBSD to make Privoxy build again. - * - * Tested shortly on OpenBSD 3.9 without problems, but the OpenBSD - * port has additional patches to use the mutexes OSX_DARWIN needs, - * and it should be investigated if they are still required for - * reliable operation. - * - * Revision 1.14 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.12.2.3 2006/01/21 16:16:08 david__schmidt - * Thanks to Edward Carrel for his patch to modernize OSX'spthreads support. See bug #1409623. - * - * Revision 1.12.2.2 2005/04/03 20:10:50 david__schmidt - * Thanks to Jindrich Makovicka for a race condition fix for the log - * file. The race condition remains for non-pthread implementations. - * Reference patch #1175720. - * - * Revision 1.12.2.1 2003/03/07 03:41:05 david__schmidt - * Wrapping all *_r functions (the non-_r versions of them) with mutex - * semaphores for OSX. Hopefully this will take care of all of those pesky - * crash reports. - * - * Revision 1.12 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.11 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.10 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.9 2002/03/07 03:52:44 oes - * Set logging to tty for --no-daemon mode - * - * Revision 1.8 2002/03/04 18:19:49 oes - * Added extern const char *pidfile - * - * Revision 1.7 2001/11/05 21:41:43 steudten - * Add changes to be a real daemon just for unix os. - * (change cwd to /, detach from controlling tty, set - * process group and session leader to the own process. - * Add DBG() Macro. - * Add some fatal-error log message for failed malloc(). - * Add '-d' if compiled with 'configure --with-debug' to - * enable debug output. - * - * Revision 1.6 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.5 2001/07/29 19:32:00 jongfoster - * Renaming _main() [mingw32 only] to real_main(), for ANSI compliance. - * - * Revision 1.4 2001/07/29 18:58:15 jongfoster - * Removing nested #includes, adding forward declarations for needed - * structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED. - * - * Revision 1.3 2001/07/18 12:31:58 oes - * moved #define freez from jcc.h to project.h - * - * Revision 1.2 2001/05/31 21:24:47 jongfoster - * Changed "permission" to "action" throughout. - * Removed DEFAULT_USER_AGENT - it must now be specified manually. - * Moved vanilla wafer check into chat(), since we must now - * decide whether or not to add it based on the URL. - * - * Revision 1.1.1.1 2001/05/15 13:58:56 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -struct client_state; -struct file_list; - -/* Global variables */ - -#ifdef FEATURE_STATISTICS -extern int urls_read; -extern int urls_rejected; -#endif /*def FEATURE_STATISTICS*/ - -extern struct client_state clients[1]; -extern struct file_list files[1]; - -#ifdef unix -extern const char *pidfile; -#endif -extern int no_daemon; - -#ifdef FEATURE_GRACEFUL_TERMINATION -extern int g_terminate; -#endif - -#if defined(FEATURE_PTHREAD) || defined(_WIN32) -#define MUTEX_LOCKS_AVAILABLE - -#ifdef FEATURE_PTHREAD -#include <pthread.h> - -typedef pthread_mutex_t privoxy_mutex_t; - -#else - -typedef CRITICAL_SECTION privoxy_mutex_t; - -#endif - -extern void privoxy_mutex_lock(privoxy_mutex_t *mutex); -extern void privoxy_mutex_unlock(privoxy_mutex_t *mutex); - -extern privoxy_mutex_t log_mutex; -extern privoxy_mutex_t log_init_mutex; -extern privoxy_mutex_t connection_reuse_mutex; - -#ifndef HAVE_GMTIME_R -extern privoxy_mutex_t gmtime_mutex; -#endif /* ndef HAVE_GMTIME_R */ - -#ifndef HAVE_LOCALTIME_R -extern privoxy_mutex_t localtime_mutex; -#endif /* ndef HAVE_GMTIME_R */ - -#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) -extern privoxy_mutex_t resolver_mutex; -#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */ - -#ifndef HAVE_RANDOM -extern privoxy_mutex_t rand_mutex; -#endif /* ndef HAVE_RANDOM */ - -#endif /* FEATURE_PTHREAD */ - -/* Functions */ - -#ifdef __MINGW32__ -int real_main(int argc, const char *argv[]); -#else -int main(int argc, const char *argv[]); -#endif - -/* Revision control strings from this header and associated .c file */ -extern const char jcc_rcs[]; -extern const char jcc_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef JCC_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/list.c b/external/privoxy/list.c deleted file mode 100644 index c158129..0000000 --- a/external/privoxy/list.c +++ /dev/null @@ -1,1229 +0,0 @@ -const char list_rcs[] = "$Id: list.c,v 1.20 2007/05/14 16:56:07 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/list.c,v $ - * - * Purpose : Declares functions to handle lists. - * Functions declared include: - * `destroy_list', `enlist' and `list_to_text' - * - * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: list.c,v $ - * Revision 1.20 2007/05/14 16:56:07 fabiankeil - * - Stop using strcpy(). - * - enlist_unique_header() now behaves as advertised - * and checks for existing headers with the same name - * but ignores the values. - * - * Revision 1.19 2007/04/17 18:14:06 fabiankeil - * Add list_contains_item(). - * - * Revision 1.18 2006/12/28 19:21:23 fabiankeil - * Fixed gcc43 warning and enabled list_is_valid()'s loop - * detection again. It was ineffective since the removal of - * the arbitrary list length limit two years ago. - * - * Revision 1.17 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.15.2.2 2004/05/25 02:04:23 david__schmidt - * Removed the "arbitrary" 1000 filter limit in file.c. See tracker #911950. - * - * Revision 1.15.2.1 2002/11/28 18:14:54 oes - * Added unmap function that removes all items with a given - * name from a map. - * - * Revision 1.15 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.14 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.13 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.12 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.11 2001/10/23 21:21:03 jongfoster - * New error handling - error codes are now jb_errs, not ints. - * Changed the way map() handles out-of-memory, to dramatically - * reduce the amount of error-checking clutter needed. - * - * Revision 1.10 2001/09/16 17:30:24 jongfoster - * Fixing a compiler warning. - * - * Revision 1.9 2001/09/16 13:20:29 jongfoster - * Rewrite of list library. Now has seperate header and list_entry - * structures. Also added a large sprinking of assert()s to the list - * code. - * - * Revision 1.8 2001/08/07 14:00:20 oes - * Fixed comment - * - * Revision 1.7 2001/08/05 16:06:20 jongfoster - * Modifiying "struct map" so that there are now separate header and - * "map_entry" structures. This means that functions which modify a - * map no longer need to return a pointer to the modified map. - * Also, it no longer reverses the order of the entries (which may be - * important with some advanced template substitutions). - * - * Revision 1.6 2001/07/31 14:44:51 oes - * list_to_text() now appends empty line at end - * - * Revision 1.5 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.4 2001/06/29 13:30:22 oes - * - Added Convenience function enlist_unique_header(), - * which takes the Header name and value as separate - * arguments and thus saves the pain of sprintf()ing - * and determining the Header name length to enlist_unique - * - Improved comments - * - Removed logentry from cancelled commit - * - * Revision 1.3 2001/06/03 19:12:24 oes - * functions for new struct map, extended enlist_unique - * - * Revision 1.2 2001/06/01 18:49:17 jongfoster - * Replaced "list_share" with "list" - the tiny memory gain was not - * worth the extra complexity. - * - * Revision 1.1 2001/05/31 21:11:53 jongfoster - * - Moved linked list support to new "list.c" file. - * Structure definitions are still in project.h, - * function prototypes are now in "list.h". - * - Added support for "struct list_share", which is identical - * to "struct list" except it saves memory by not duplicating - * the strings. Obviously, this only works if there is some - * other way of managing the memory used by the strings. - * (These list_share lists are used for lists which last - * for only 1 request, and where all the list entries are - * just coming directly from entries in the actionsfile.) - * Note that you still need to destroy list_share lists - * properly to free the nodes - it's only the strings - * which are shared. - * - * - *********************************************************************/ - - -#include "config.h" - -#ifndef _WIN32 -/* FIXME: The following headers are not needed for Win32. Are they - * needed on other platforms? - */ -#include <stdio.h> -#include <sys/types.h> -#include <stdlib.h> -#include <ctype.h> -#endif -#include <string.h> - -#if !defined(_WIN32) && !defined(__OS2__) -#include <unistd.h> -#endif - -#include <assert.h> - -#include "project.h" -#include "list.h" -#include "miscutil.h" - -const char list_h_rcs[] = LIST_H_VERSION; - - -static int list_is_valid (const struct list *the_list); - - -/********************************************************************* - * - * Function : init_list - * - * Description : Create a new, empty list in user-allocated memory. - * Caller should allocate a "struct list" variable, - * then pass it to this function. - * (Implementation note: Rather than calling this - * function, you can also just memset the memory to - * zero, e.g. if you have a larger structure you - * want to initialize quickly. However, that isn't - * really good design.) - * - * Parameters : - * 1 : the_list = pointer to list - * - * Returns : N/A - * - *********************************************************************/ -void init_list(struct list *the_list) -{ - memset(the_list, '\0', sizeof(*the_list)); -} - - -/********************************************************************* - * - * Function : destroy_list - * - * Description : Destroy a string list (opposite of list_init). - * On return, the memory used by the list entries has - * been freed, but not the memory used by the_list - * itself. You should not re-use the_list without - * calling list_init(). - * - * (Implementation note: You *can* reuse the_list - * without calling list_init(), but please don't. - * If you want to remove all entries from a list - * and still have a usable list, then use - * list_remove_all().) - * - * Parameters : - * 1 : the_list = pointer to list - * - * Returns : N/A - * - *********************************************************************/ -void destroy_list (struct list *the_list) -{ - struct list_entry *cur_entry, *next_entry; - - assert(the_list); - - for (cur_entry = the_list->first; cur_entry ; cur_entry = next_entry) - { - next_entry = cur_entry->next; - freez(cur_entry->str); - free(cur_entry); - } - - the_list->first = NULL; - the_list->last = NULL; -} - - -/********************************************************************* - * - * Function : list_is_valid - * - * Description : Check that a string list is valid. The intended - * usage is "assert(list_is_valid(the_list))". - * Currently this checks that "the_list->last" - * is correct, and that the list dosn't contain - * circular references. It is likely to crash if - * it's passed complete garbage. - * - * Parameters : - * 1 : the_list = pointer to list. Must be non-null. - * - * Returns : 1 if list is valid, 0 otherwise. - * - *********************************************************************/ -static int list_is_valid (const struct list *the_list) -{ - /* - * If you don't want this check, just change the line below - * from "#if 1" to "#if 0". - */ -#if 1 - const struct list_entry *cur_entry; - const struct list_entry *last_entry = NULL; - int entry = 0; - - assert(the_list); - - for (cur_entry = the_list->first; cur_entry ; cur_entry = cur_entry->next) - { - last_entry = cur_entry; - - if (cur_entry->str) - { - /* - * Just check that this string can be accessed - i.e. it's a valid - * pointer. - */ - (void)strlen(cur_entry->str); - } - - /* - * Check for looping back to first - */ - if ((entry++ != 0) && (cur_entry == the_list->first)) - { - return 0; - } - - /* - * Arbitrarily limit list length to prevent infinite loops. - * Note that the 1000 limit was hit by a real user in tracker 911950; - * removing it for now. Real circular references should eventually - * be caught by the check above, anyway. - */ - /* - if (entry > 1000) - { - return 0; - } - */ - - /* - * Check this isn't marked as the last entry, unless of course it's - * *really* the last entry. - */ - if ((the_list->last == cur_entry) && (cur_entry->next != NULL)) - { - /* This is the last entry, but there's data after it !!?? */ - return 0; - } - } - - return (the_list->last == last_entry); -#else - return 1; -#endif -} - -/********************************************************************* - * - * Function : enlist - * - * Description : Append a string into a specified string list. - * - * Parameters : - * 1 : the_list = pointer to list - * 2 : str = string to add to the list (maybe NULL) - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * On error, the_list will be unchanged. - * - *********************************************************************/ -jb_err enlist(struct list *the_list, const char *str) -{ - struct list_entry *cur; - - assert(the_list); - assert(list_is_valid(the_list)); - - if (NULL == (cur = (struct list_entry *)zalloc(sizeof(*cur)))) - { - return JB_ERR_MEMORY; - } - - if (str) - { - if (NULL == (cur->str = strdup(str))) - { - free(cur); - return JB_ERR_MEMORY; - } - } - /* else { cur->str = NULL; } - implied by zalloc */ - - /* cur->next = NULL; - implied by zalloc */ - - if (the_list->last) - { - the_list->last->next = cur; - the_list->last = cur; - } - else - { - the_list->first = cur; - the_list->last = cur; - } - - assert(list_is_valid(the_list)); - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : enlist_first - * - * Description : Append a string as first element into a specified - * string list. - * - * Parameters : - * 1 : the_list = pointer to list - * 2 : str = string to add to the list (maybe NULL) - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * On error, the_list will be unchanged. - * - *********************************************************************/ -jb_err enlist_first(struct list *the_list, const char *str) -{ - struct list_entry *cur; - - assert(the_list); - assert(list_is_valid(the_list)); - - if (NULL == (cur = (struct list_entry *)zalloc(sizeof(*cur)))) - { - return JB_ERR_MEMORY; - } - - if (str) - { - if (NULL == (cur->str = strdup(str))) - { - free(cur); - return JB_ERR_MEMORY; - } - } - /* else { cur->str = NULL; } - implied by zalloc */ - - cur->next = the_list->first; - - the_list->first = cur; - if (the_list->last == NULL) - { - the_list->last = cur; - } - - assert(list_is_valid(the_list)); - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : enlist_unique - * - * Description : Append a string into a specified string list, - * if & only if it's not there already. - * If the num_significant_chars argument is nonzero, - * only compare up to the nth character. - * - * Parameters : - * 1 : the_list = pointer to list - * 2 : str = string to add to the list - * 3 : num_significant_chars = number of chars to use - * for uniqueness test, or 0 to require an exact match. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * On error, the_list will be unchanged. - * "Success" does not indicate whether or not the - * item was already in the list. - * - *********************************************************************/ -jb_err enlist_unique(struct list *the_list, const char *str, - size_t num_significant_chars) -{ - struct list_entry *cur_entry; - - assert(the_list); - assert(list_is_valid(the_list)); - assert(str); - assert(num_significant_chars >= 0); - assert(num_significant_chars <= strlen(str)); - - if (num_significant_chars > 0) - { - for (cur_entry = the_list->first; cur_entry != NULL; cur_entry = cur_entry->next) - { - if ( (cur_entry->str != NULL) - && (0 == strncmp(str, cur_entry->str, num_significant_chars))) - { - /* Already there */ - return JB_ERR_OK; - } - } - } - else - { - /* Test whole string */ - for (cur_entry = the_list->first; cur_entry != NULL; cur_entry = cur_entry->next) - { - if ( (cur_entry->str != NULL) && (0 == strcmp(str, cur_entry->str))) - { - /* Already there */ - return JB_ERR_OK; - } - } - } - - return enlist(the_list, str); -} - - -/********************************************************************* - * - * Function : enlist_unique_header - * - * Description : Make a HTTP header from the two strings name and value, - * and append the result into a specified string list, - * if & only if there isn't already a header with that name. - * - * Parameters : - * 1 : the_list = pointer to list - * 2 : name = HTTP header name (e.g. "Content-type") - * 3 : value = HTTP header value (e.g. "text/html") - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * On error, the_list will be unchanged. - * "Success" does not indicate whether or not the - * header was already in the list. - * - *********************************************************************/ -jb_err enlist_unique_header(struct list *the_list, const char *name, - const char *value) -{ - jb_err result = JB_ERR_MEMORY; - char *header; - size_t header_size; - - assert(the_list); - assert(list_is_valid(the_list)); - assert(name); - assert(value); - - /* + 2 for the ': ', + 1 for the \0 */ - header_size = strlen(name) + 2 + strlen(value) + 1; - header = (char *)malloc(header_size); - - if (NULL != header) - { - const size_t bytes_to_compare = strlen(name) + 2; - - snprintf(header, header_size, "%s: %s", name, value); - result = enlist_unique(the_list, header, bytes_to_compare); - free(header); - assert(list_is_valid(the_list)); - } - - return result; - -} - - -/********************************************************************* - * - * Function : list_remove_all - * - * Description : Remove all entries from a list. On return, the_list - * is a valid, empty list. Note that this is similar - * to destroy_list(), but the difference is that this - * function guarantees that the list structure is still - * valid after the call. - * - * Parameters : - * 1 : the_list = pointer to list - * - * Returns : N/A - * - *********************************************************************/ -void list_remove_all(struct list *the_list) -{ - struct list_entry *cur_entry; - struct list_entry *next_entry; - - assert(the_list); - assert(list_is_valid(the_list)); - - for (cur_entry = the_list->first; cur_entry ; cur_entry = next_entry) - { - next_entry = cur_entry->next; - freez(cur_entry->str); - free(cur_entry); - } - - the_list->first = the_list->last = NULL; - - assert(list_is_valid(the_list)); -} - - -/********************************************************************* - * - * Function : list_to_text - * - * Description : "Flatten" a string list into 1 long \r\n delimited string, - * adding an empty line at the end. NULL entries are ignored. - * This function does not change the_list. - * - * XXX: Should probably be renamed as it's only - * useful (and used) to flatten header lists. - * - * Parameters : - * 1 : the_list = pointer to list - * - * Returns : NULL on malloc error, else new long string. - * Caller must free() it. - * - *********************************************************************/ -char *list_to_text(const struct list *the_list) -{ - struct list_entry *cur_entry; - char *text; - size_t text_length; - char *cursor; - size_t bytes_left; - - assert(the_list); - assert(list_is_valid(the_list)); - - /* - * Calculate the lenght of the final text. - * '2' because of the '\r\n' at the end of - * each string and at the end of the text. - */ - text_length = 2; - for (cur_entry = the_list->first; cur_entry; cur_entry = cur_entry->next) - { - if (cur_entry->str) - { - text_length += strlen(cur_entry->str) + 2; - } - } - - bytes_left = text_length + 1; - - text = (char *)malloc(bytes_left); - if (NULL == text) - { - return NULL; - } - - cursor = text; - - for (cur_entry = the_list->first; cur_entry; cur_entry = cur_entry->next) - { - if (cur_entry->str) - { - const int written = snprintf(cursor, bytes_left, "%s\r\n", cur_entry->str); - - assert(written > 0); - assert(written < bytes_left); - - bytes_left -= (size_t)written; - cursor += (size_t)written; - } - } - - assert(bytes_left == 3); - - *cursor++ = '\r'; - *cursor++ = '\n'; - *cursor = '\0'; - - assert(text_length == cursor - text); - assert(text[text_length] == '\0'); - - return text; -} - - -/********************************************************************* - * - * Function : list_remove_item - * - * Description : Remove a string from a specified string list. - * - * Parameters : - * 1 : the_list = pointer to list - * 2 : str = string to remove from the list - non-NULL - * - * Returns : Number of times it was removed. - * - *********************************************************************/ -int list_remove_item(struct list *the_list, const char *str) -{ - struct list_entry *prev = NULL; - struct list_entry *cur; - struct list_entry *next; - int count = 0; - - assert(the_list); - assert(list_is_valid(the_list)); - assert(str); - - cur = the_list->first; - - while (cur != NULL) - { - next = cur->next; - - if ((cur->str != NULL) && (0 == strcmp(str, cur->str))) - { - count++; - - if (prev != NULL) - { - prev->next = next; - } - else - { - the_list->first = next; - } - free((char *)cur->str); - free(cur); - } - else - { - prev = cur; - } - cur = next; - } - - the_list->last = prev; - - assert(list_is_valid(the_list)); - - return count; -} - - -/********************************************************************* - * - * Function : list_remove_list - * - * Description : Remove all strings in one list from another list. - * This is currently a brute-force algorithm - * (it compares every pair of strings). - * - * Parameters : - * 1 : dest = list to change - * 2 : src = list of strings to remove - * - * Returns : Total number of strings removed. - * - *********************************************************************/ -int list_remove_list(struct list *dest, const struct list *src) -{ - struct list_entry *cur; - int count = 0; - - assert(src); - assert(dest); - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - for (cur = src->first; cur != NULL; cur = cur->next) - { - if (cur->str != NULL) - { - count += list_remove_item(dest, cur->str); - } - } - - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return count; -} - - -/********************************************************************* - * - * Function : list_duplicate - * - * Description : Copy a string list - * - * Parameters : - * 1 : dest = Destination list. Must be a valid list. - * All existing entries will be removed. - * 1 : src = pointer to source list for copy. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * On error, dest will be empty. - * - *********************************************************************/ -jb_err list_duplicate(struct list *dest, const struct list *src) -{ - struct list_entry * cur_src; - struct list_entry * cur_dest; - - assert(src); - assert(dest); - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - list_remove_all(dest); - - /* Need to process first entry specially so we can set dest->first */ - cur_src = src->first; - if (cur_src) - { - cur_dest = dest->first = (struct list_entry *)zalloc(sizeof(*cur_dest)); - if (cur_dest == NULL) - { - destroy_list(dest); - - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return JB_ERR_MEMORY; - } - - if (cur_src->str) - { - cur_dest->str = strdup(cur_src->str); - if (cur_dest->str == NULL) - { - destroy_list(dest); - - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return JB_ERR_MEMORY; - } - } - /* else { cur_dest->str = NULL; } - implied by zalloc */ - - /* Now process the rest */ - for (cur_src = cur_src->next; cur_src; cur_src = cur_src->next) - { - cur_dest = cur_dest->next = (struct list_entry *)zalloc(sizeof(*cur_dest)); - if (cur_dest == NULL) - { - destroy_list(dest); - - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return JB_ERR_MEMORY; - } - if (cur_src->str) - { - cur_dest->str = strdup(cur_src->str); - if (cur_dest->str == NULL) - { - destroy_list(dest); - - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return JB_ERR_MEMORY; - } - } - /* else { cur_dest->str = NULL; } - implied by zalloc */ - } - - dest->last = cur_dest; - } - - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : list_append_list_unique - * - * Description : Append a string list to another list. - * Duplicate items are not added. - * - * Parameters : - * 1 : dest = pointer to destination list for merge. - * 2 : src = pointer to source for merge. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * On error, some (but not all) of src might have - * been copied into dest. - * - *********************************************************************/ -jb_err list_append_list_unique(struct list *dest, const struct list *src) -{ - struct list_entry * cur; - - assert(src); - assert(dest); - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - for (cur = src->first; cur; cur = cur->next) - { - if (cur->str) - { - if (enlist_unique(dest, cur->str, 0)) - { - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return JB_ERR_MEMORY; - } - } - } - - assert(list_is_valid(src)); - assert(list_is_valid(dest)); - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : list_is_empty - * - * Description : Test whether a list is empty. Does not change the list. - * - * Parameters : - * 1 : the_list = pointer to list to test. - * - * Returns : Nonzero if the list contains no entries. - * - *********************************************************************/ -int list_is_empty(const struct list *the_list) -{ - assert(the_list); - assert(list_is_valid(the_list)); - - return (the_list->first == NULL); -} - - -/********************************************************************* - * - * Function : list_contains_item - * - * Description : Tests whether a list item is already set. - * Does not change the list. - * - * Parameters : - * 1 : the_list = list to search in - * 2 : str = string to search for - * - * Returns : TRUE if the item was found, - * FALSE otherwise. - * - *********************************************************************/ -int list_contains_item(const struct list *the_list, const char *str) -{ - struct list_entry *entry; - - assert(the_list); - assert(list_is_valid(the_list)); - assert(str); - - for (entry = the_list->first; entry != NULL; entry = entry->next) - { - if (entry->str == NULL) - { - /* - * NULL pointers are allowed in some lists. - * For example for csp->headers in case a - * header was removed. - */ - continue; - } - - if (0 == strcmp(str, entry->str)) - { - /* Item found */ - return TRUE; - } - } - - return FALSE; -} - - -/********************************************************************* - * - * Function : new_map - * - * Description : Create a new, empty map. - * - * Parameters : N/A - * - * Returns : A new, empty map, or NULL if out of memory. - * - *********************************************************************/ -struct map *new_map(void) -{ - return (struct map *) zalloc(sizeof(struct map)); -} - - -/********************************************************************* - * - * Function : free_map - * - * Description : Free the memory occupied by a map and its - * depandant strings - * - * Parameters : - * 1 : the_map = map to be freed. May be NULL. - * - * Returns : N/A - * - *********************************************************************/ -void free_map(struct map *the_map) -{ - struct map_entry *cur_entry; - struct map_entry *next_entry; - - if (the_map == NULL) - { - return; - } - - for (cur_entry = the_map->first; cur_entry != NULL; cur_entry = next_entry) - { - freez(cur_entry->name); - freez(cur_entry->value); - - next_entry = cur_entry->next; - free(cur_entry); - } - - the_map->first = the_map->last = NULL; - - free(the_map); -} - - -/********************************************************************* - * - * Function : map - * - * Description : Add a mapping from given name to given value to a - * given map. - * - * Note: Since all strings will be free()d in free_map() - * later, set the copy flags for constants or - * strings that will be independantly free()d. - * - * Note2: This function allows NULL parameters - it - * returns JB_ERR_MEMORY in that case. - * - * Note3: If this function returns JB_ERR_MEMORY, - * it will free(name) unless you specify - * name_needs_copying, and similarly it will - * free(value) unless you specify - * value_needs_copying. - * - * Due to Note2 and Note3 above, the following code - * is legal, and will never crash or leak memory even - * if the system runs out of memory: - * - * err = map(mymap, "xyz", 1, html_encode(somestring), 0); - * - * err will be set to JB_ERR_MEMORY if either call runs - * out-of-memory. Without these features, you would - * need to check the return value of html_encode in the - * above example for NULL, which (at least) doubles the - * amount of error-checking code needed. - * - * Parameters : - * 1 : the_map = map to add to - * 2 : name = name to add - * 3 : name_needs_copying = flag set if a copy of name should be used - * 4 : value = value to add - * 5 : value_needs_copying = flag set if a copy of value should be used - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err map(struct map *the_map, - const char *name, int name_needs_copying, - const char *value, int value_needs_copying) -{ - struct map_entry *new_entry; - - assert(the_map); - - if ( (NULL == value) - || (NULL == name) - || (NULL == (new_entry = zalloc(sizeof(*new_entry)))) ) - { - if ((name != NULL) && (!name_needs_copying)) - { - free((char *)name); - } - if ((value != NULL) && (!value_needs_copying)) - { - free((char *)value); - } - return JB_ERR_MEMORY; - } - - if (name_needs_copying) - { - if (NULL == (name = strdup(name))) - { - free(new_entry); - if (!value_needs_copying) - { - free((char *)value); - } - return JB_ERR_MEMORY; - } - } - - if (value_needs_copying) - { - if (NULL == (value = strdup(value))) - { - free((char *)name); - free(new_entry); - return JB_ERR_MEMORY; - } - } - - new_entry->name = name; - new_entry->value = value; - /* new_entry->next = NULL; - implied by zalloc */ - - if (the_map->last) - { - the_map->last->next = new_entry; - the_map->last = new_entry; - } - else - { - the_map->first = new_entry; - the_map->last = new_entry; - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : unmap - * - * Description : Remove all map_entry structs with a given name from - * a given map. - * - * Parameters : - * 1 : the_map = map to look in - * 2 : name = name to unmap - * - * Returns : JB_ERR_OK - * - *********************************************************************/ -jb_err unmap(struct map *the_map, const char *name) -{ - struct map_entry *cur_entry, *last_entry; - - assert(the_map); - assert(name); - - last_entry = the_map->first; - - for (cur_entry = the_map->first; cur_entry != NULL; cur_entry = cur_entry->next) - { - if (!strcmp(name, cur_entry->name)) - { - /* - * Update the incoming pointer - */ - if (cur_entry == the_map->first) - { - the_map->first = cur_entry->next; - } - else - { - last_entry->next = cur_entry->next; - } - - /* - * Update the map's last pointer - */ - if (cur_entry == the_map->last) - { - the_map->last = last_entry; - } - - /* - * Free the map_entry - */ - freez(cur_entry->name); - freez(cur_entry->value); - freez(cur_entry); - - cur_entry = last_entry; - } - else - { - last_entry = cur_entry; - } - } - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : lookup - * - * Description : Look up an item with a given name in a map, and - * return its value - * - * Parameters : - * 1 : the_map = map to look in - * 2 : name = name parameter to look for - * - * Returns : the value if found, else the empty string. - * Return value is alloced as part of the map, so - * it is freed when the map is destroyed. Caller - * must not free or modify it. - * - *********************************************************************/ -const char *lookup(const struct map *the_map, const char *name) -{ - const struct map_entry *cur_entry; - - assert(the_map); - assert(name); - - for (cur_entry = the_map->first; cur_entry != NULL; cur_entry = cur_entry->next) - { - if (!strcmp(name, cur_entry->name)) - { - return cur_entry->value; - } - } - return ""; -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/list.h b/external/privoxy/list.h deleted file mode 100644 index b116237..0000000 --- a/external/privoxy/list.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef LIST_H_INCLUDED -#define LIST_H_INCLUDED -#define LIST_H_VERSION "$Id: list.h,v 1.15 2007/04/17 18:14:06 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/list.h,v $ - * - * Purpose : Declares functions to handle lists. - * Functions declared include: - * `destroy_list', `enlist' and `list_to_text' - * - * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: list.h,v $ - * Revision 1.15 2007/04/17 18:14:06 fabiankeil - * Add list_contains_item(). - * - * Revision 1.14 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.12.2.1 2002/11/28 18:14:54 oes - * Added unmap function that removes all items with a given - * name from a map. - * - * Revision 1.12 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.11 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.10 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.9 2001/10/23 21:21:03 jongfoster - * New error handling - error codes are now jb_errs, not ints. - * Changed the way map() handles out-of-memory, to dramatically - * reduce the amount of error-checking clutter needed. - * - * Revision 1.8 2001/09/16 17:30:24 jongfoster - * Fixing a compiler warning. - * - * Revision 1.7 2001/09/16 13:20:29 jongfoster - * Rewrite of list library. Now has seperate header and list_entry - * structures. Also added a large sprinking of assert()s to the list - * code. - * - * Revision 1.6 2001/08/05 16:06:20 jongfoster - * Modifiying "struct map" so that there are now separate header and - * "map_entry" structures. This means that functions which modify a - * map no longer need to return a pointer to the modified map. - * Also, it no longer reverses the order of the entries (which may be - * important with some advanced template substitutions). - * - * Revision 1.5 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.4 2001/06/29 13:30:37 oes - * - Introduced enlist_unique_header() - * - Removed logentry from cancelled commit - * - * Revision 1.3 2001/06/03 11:03:48 oes - * introduced functions for new list type "map": map(), lookup(), - * free_map(), and extended enlist_unique - * - * Revision 1.2 2001/06/01 18:49:17 jongfoster - * Replaced "list_share" with "list" - the tiny memory gain was not - * worth the extra complexity. - * - * Revision 1.1 2001/05/31 21:11:53 jongfoster - * - Moved linked list support to new "list.c" file. - * Structure definitions are still in project.h, - * function prototypes are now in "list.h". - * - Added support for "struct list_share", which is identical - * to "struct list" except it saves memory by not duplicating - * the strings. Obviously, this only works if there is some - * other way of managing the memory used by the strings. - * (These list_share lists are used for lists which last - * for only 1 request, and where all the list entries are - * just coming directly from entries in the actionsfile.) - * Note that you still need to destroy list_share lists - * properly to free the nodes - it's only the strings - * which are shared. - * - * - *********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - - -/* - * struct list - * - * A linked list class. - */ - -extern void init_list (struct list *the_list); -extern void destroy_list (struct list *the_list); - -extern jb_err enlist (struct list *the_list, const char *str); -extern jb_err enlist_unique (struct list *the_list, const char *str, size_t num_significant_chars); -extern jb_err enlist_unique_header (struct list *the_list, const char *name, const char *value); -extern jb_err enlist_first (struct list *the_list, const char *str); -extern jb_err list_append_list_unique(struct list *dest, const struct list *src); -extern jb_err list_duplicate (struct list *dest, const struct list *src); - -extern int list_remove_item(struct list *the_list, const char *str); -extern int list_remove_list(struct list *dest, const struct list *src); -extern void list_remove_all (struct list *the_list); - -extern int list_is_empty(const struct list *the_list); - -extern char * list_to_text(const struct list *the_list); - -extern int list_contains_item(const struct list *the_list, const char *str); - -/* - * struct map - * - * A class which maps names to values. - * - * Note: You must allocate this through new_map() and free it - * through free_map(). - */ - -extern struct map * new_map (void); -extern void free_map (struct map * the_map); - -extern jb_err map (struct map * the_map, - const char * name, int name_needs_copying, - const char * value, int value_needs_copying); -extern jb_err unmap (struct map *the_map, - const char *name); -extern const char * lookup (const struct map * the_map, const char * name); - - -/* Revision control strings from this header and associated .c file */ -extern const char list_rcs[]; -extern const char list_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef LIST_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/loadcfg.c b/external/privoxy/loadcfg.c deleted file mode 100644 index c2e3bd1..0000000 --- a/external/privoxy/loadcfg.c +++ /dev/null @@ -1,2041 +0,0 @@ -const char loadcfg_rcs[] = "$Id: loadcfg.c,v 1.93 2009/03/18 21:46:26 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/loadcfg.c,v $ - * - * Purpose : Loads settings from the configuration file into - * global variables. This file contains both the - * routine to load the configuration and the global - * variables it writes to. - * - * Copyright : Written by and Copyright (C) 2001-2009 the - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: loadcfg.c,v $ - * Revision 1.93 2009/03/18 21:46:26 fabiankeil - * Revert the last commit as there's a better way. - * - * Revision 1.92 2009/03/18 20:43:19 fabiankeil - * Don't enable LOG_LEVEL_INFO by default and don't apply the user's - * debug settings until the logfile has been opened (if there is one). - * Patch submitted by Roland in #2624120. - * - * Revision 1.91 2009/03/09 17:29:08 fabiankeil - * As of r1.88, the show-status page can use a single line for - * warnings about ignored directives and the names of the ignored - * directives themselves. Reminded by Lee, finally closes #1856559. - * - * Revision 1.90 2009/03/07 17:58:02 fabiankeil - * Fix two mingw32-only buffer overflows. Note that triggering - * them requires control over the configuration file in which - * case all bets are off anyway. - * - * Revision 1.89 2009/03/01 18:46:33 fabiankeil - * - Help clang understand that we aren't - * dereferencing NULL pointers here. - * - Some style fixes in the modified region. - * - * Revision 1.88 2009/02/28 10:57:10 fabiankeil - * Gimme a break or two. Don't let the show-status page - * link to the website documentation for the user-manual - * directive itself. - * - * Revision 1.87 2009/02/15 07:56:13 fabiankeil - * Increase default socket timeout to 300 seconds. - * - * Revision 1.86 2009/02/08 19:18:57 fabiankeil - * Now that we have the match-all.action file, the other action - * files changed their position in config->actions_file[] back - * to the way it was before standard.action got removed and the - * changes from revision 1.84 have to be reverted. - * - * Revision 1.85 2009/01/22 12:06:26 fabiankeil - * Don't keep connections alive when running single-threaded. - * - * Revision 1.84 2009/01/14 16:14:36 fabiankeil - * Due to the standard.action file removal, the other action - * files changed their position in config->actions_file[]. - * Update mingw32 kludge accordingly. - * - * Revision 1.83 2008/12/20 14:53:55 fabiankeil - * Add config option socket-timeout to control the time - * Privoxy waits for data to arrive on a socket. Useful - * in case of stale ssh tunnels or when fuzz-testing. - * - * Revision 1.82 2008/11/16 12:43:49 fabiankeil - * Turn keep-alive support into a runtime feature - * that is disabled by setting keep-alive-timeout - * to a negative value. - * - * Revision 1.81 2008/11/13 09:08:42 fabiankeil - * Add new config option: keep-alive-timeout. - * - * Revision 1.80 2008/08/31 15:59:03 fabiankeil - * There's no reason to let remote toggling support depend - * on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't. - * - * Revision 1.79 2008/08/30 12:03:07 fabiankeil - * Remove FEATURE_COOKIE_JAR. - * - * Revision 1.78 2008/08/02 08:23:22 fabiankeil - * If the enforce-blocks directive is used with FEATURE_FORCE_LOAD - * disabled, log a message that blocks will always be enforced - * instead of complaining about an unrecognized directive. - * Reported by Pietro Leone. - * - * Revision 1.77 2008/05/26 16:13:22 fabiankeil - * Reuse directive_hash and don't hash the same directive twice. - * - * Revision 1.76 2008/05/10 09:03:16 fabiankeil - * - Merge three string_append() calls. - * - Remove useless assertion. - * - * Revision 1.75 2008/03/30 14:52:05 fabiankeil - * Rename load_actions_file() and load_re_filterfile() - * as they load multiple files "now". - * - * Revision 1.74 2008/03/26 18:07:07 fabiankeil - * Add hostname directive. Closes PR#1918189. - * - * Revision 1.73 2008/02/16 16:54:51 fabiankeil - * Fix typo. - * - * Revision 1.72 2008/02/03 13:46:15 fabiankeil - * Add SOCKS5 support. Patch #1862863 by Eric M. Hopper with minor changes. - * - * Revision 1.71 2007/12/23 15:24:56 fabiankeil - * Reword "unrecognized directive" warning, use better - * mark up and add a <br>. Fixes parts of #1856559. - * - * Revision 1.70 2007/12/15 14:24:05 fabiankeil - * Plug memory leak if listen-address only specifies the port. - * - * Revision 1.69 2007/10/27 13:02:27 fabiankeil - * Relocate daemon-mode-related log messages to make sure - * they aren't shown again in case of configuration reloads. - * - * Revision 1.68 2007/10/19 16:32:34 fabiankeil - * Plug memory leak introduced with my last commit. - * - * Revision 1.67 2007/10/14 14:12:41 fabiankeil - * When in daemon mode, close stderr after the configuration file has been - * parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436. - * - * Revision 1.66 2007/08/05 14:02:09 fabiankeil - * #1763173 from Stefan Huehner: declare unload_configfile() static. - * - * Revision 1.65 2007/07/21 11:51:36 fabiankeil - * As Hal noticed, checking dispatch_cgi() as the last cruncher - * looks like a bug if CGI requests are blocked unintentionally, - * so don't do it unless the user enabled the new config option - * "allow-cgi-request-crunching". - * - * Revision 1.64 2007/05/21 10:44:08 fabiankeil - * - Use strlcpy() instead of strcpy(). - * - Stop treating actions files special. Expect a complete file name - * (with or without path) like it's done for the rest of the files. - * Closes FR#588084. - * - Remove an unnecessary temporary memory allocation. - * - Don't log anything to the console when running as - * daemon and no errors occurred. - * - * Revision 1.63 2007/04/09 18:11:36 fabiankeil - * Don't mistake VC++'s _snprintf() for a snprintf() replacement. - * - * Revision 1.62 2007/03/17 15:20:05 fabiankeil - * New config option: enforce-blocks. - * - * Revision 1.61 2007/03/16 16:47:35 fabiankeil - * - Mention other reasons why acl directive loading might have failed. - * - Don't log the acl source if the acl destination is to blame. - * - * Revision 1.60 2007/01/27 13:09:16 fabiankeil - * Add new config option "templdir" to - * change the templates directory. - * - * Revision 1.59 2006/12/31 17:56:38 fabiankeil - * Added config option accept-intercepted-requests - * and disabled it by default. - * - * Revision 1.58 2006/12/31 14:24:29 fabiankeil - * Fix gcc43 compiler warnings. - * - * Revision 1.57 2006/12/21 12:57:48 fabiankeil - * Add config option "split-large-forms" - * to work around the browser bug reported - * in BR #1570678. - * - * Revision 1.56 2006/12/17 17:04:51 fabiankeil - * Move the <br> in the generated HTML for the config - * options from the beginning of the string to its end. - * Keeps the white space in balance. - * - * Revision 1.55 2006/11/28 15:31:52 fabiankeil - * Fix memory leak in case of config file reloads. - * - * Revision 1.54 2006/10/21 16:04:22 fabiankeil - * Modified kludge for win32 to make ming32 menu - * "Options/Edit Filters" (sort of) work again. - * Same limitations as for the action files apply. - * Fixes BR 1567373. - * - * Revision 1.53 2006/09/06 18:45:03 fabiankeil - * Incorporate modified version of Roland Rosenfeld's patch to - * optionally access the user-manual via Privoxy. Closes patch 679075. - * - * Formatting changed to Privoxy style, added call to - * cgi_error_no_template if the requested file doesn't - * exist and modified check whether or not Privoxy itself - * should serve the manual. Should work cross-platform now. - * - * Revision 1.52 2006/09/06 10:43:32 fabiankeil - * Added config option enable-remote-http-toggle - * to specify if Privoxy should recognize special - * headers (currently only X-Filter) to change its - * behaviour. Disabled by default. - * - * Revision 1.51 2006/09/06 09:23:37 fabiankeil - * Make number of retries in case of forwarded-connect problems - * a config file option (forwarded-connect-retries) and use 0 as - * default. - * - * Revision 1.50 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.48.2.7 2006/02/02 17:29:16 david__schmidt - * Don't forget to malloc space for the null terminator... - * - * Revision 1.48.2.6 2006/01/29 23:10:56 david__schmidt - * Multiple filter file support - * - * Revision 1.48.2.5 2003/05/08 15:17:25 oes - * Closed two memory leaks; hopefully the last remaining ones - * (in the main execution paths, anyway). - * - * Revision 1.48.2.4 2003/04/11 12:06:14 oes - * Addressed bug #719435 - * - Extraneous filterfile directives now logged as errors - * - This and unrecnonised directives now really obvious on status page - * - * Revision 1.48.2.3 2003/03/11 11:53:59 oes - * Cosmetic: Renamed cryptic variable - * - * Revision 1.48.2.2 2002/11/12 16:28:20 oes - * Move unrelated variable declaration out of #ifdef FEATURE_ACL; fixes bug #636655 - * - * Revision 1.48.2.1 2002/08/21 17:58:05 oes - * Temp kludge to let user and default action file be edited through win32 GUI (FR 592080) - * - * Revision 1.48 2002/05/14 21:30:38 oes - * savearg now uses own linking code instead of (now special-cased) add_help_link - * - * Revision 1.47 2002/05/12 21:36:29 jongfoster - * Correcting function comments - * - * Revision 1.46 2002/04/26 12:55:14 oes - * - New option "user-manual", defaults to our site - * via project.h #define - * - savearg now embeds option names in help links - * - * Revision 1.45 2002/04/24 02:11:54 oes - * Jon's multiple AF patch: Allow up to MAX_AF_FILES actionsfile options - * - * Revision 1.44 2002/04/08 20:37:13 swa - * fixed JB spelling - * - * Revision 1.43 2002/04/08 20:36:50 swa - * fixed JB spelling - * - * Revision 1.42 2002/04/05 15:50:15 oes - * fix for invalid HTML proxy_args - * - * Revision 1.41 2002/03/31 17:19:00 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.40 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.39 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.38 2002/03/24 13:05:48 jongfoster - * Renaming re_filterfile to filterfile - * - * Revision 1.37 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.36 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.35 2002/03/07 03:52:44 oes - * Set logging to tty for --no-daemon mode - * - * Revision 1.34 2002/03/06 23:14:35 jongfoster - * Trivial cosmetic changes to make function comments easier to find. - * - * Revision 1.33 2002/03/05 04:52:42 oes - * Deleted non-errlog debugging code - * - * Revision 1.32 2002/03/04 18:24:53 oes - * Re-enabled output of unknown config directive hash - * - * Revision 1.31 2002/03/03 15:07:20 oes - * Re-enabled automatic config reloading - * - * Revision 1.30 2002/01/22 23:31:43 jongfoster - * Replacing strsav() with string_append() - * - * Revision 1.29 2002/01/17 21:02:30 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Renaming free_url to free_url_spec, since it frees a struct url_spec. - * - * Revision 1.28 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.27 2001/11/07 00:02:13 steudten - * Add line number in error output for lineparsing for - * actionsfile and configfile. - * Special handling for CLF added. - * - * Revision 1.26 2001/11/05 21:41:43 steudten - * Add changes to be a real daemon just for unix os. - * (change cwd to /, detach from controlling tty, set - * process group and session leader to the own process. - * Add DBG() Macro. - * Add some fatal-error log message for failed malloc(). - * Add '-d' if compiled with 'configure --with-debug' to - * enable debug output. - * - * Revision 1.25 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.24 2001/10/23 21:40:30 jongfoster - * Added support for enable-edit-actions and enable-remote-toggle config - * file options. - * - * Revision 1.23 2001/10/07 15:36:00 oes - * Introduced new config option "buffer-limit" - * - * Revision 1.22 2001/09/22 16:36:59 jongfoster - * Removing unused parameter fs from read_config_line() - * - * Revision 1.21 2001/09/16 17:10:43 jongfoster - * Moving function savearg() here, since it was the only thing left in - * showargs.c. - * - * Revision 1.20 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.19 2001/07/15 17:45:16 jongfoster - * Removing some unused #includes - * - * Revision 1.18 2001/07/13 14:01:14 oes - * - Removed all #ifdef PCRS - * - Removed vim-settings - * - * Revision 1.17 2001/06/29 13:31:03 oes - * - Improved comments - * - Fixed (actionsfile) and sorted hashes - * - Introduced admin_address and proxy-info-url - * as config parameters - * - Renamed config->proxy_args_invocation (which didn't have - * the invocation but the options!) to config->proxy_args - * - Various adaptions - * - Removed logentry from cancelled commit - * - * Revision 1.16 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.15 2001/06/07 23:13:40 jongfoster - * Merging ACL and forward files into config file. - * Cosmetic: Sorting config file options alphabetically. - * Cosmetic: Adding brief syntax comments to config file options. - * - * Revision 1.14 2001/06/07 14:46:25 joergs - * Missing make_path() added for re_filterfile. - * - * Revision 1.13 2001/06/05 22:33:54 jongfoster - * - * Fixed minor memory leak. - * Also now uses make_path to prepend the pathnames. - * - * Revision 1.12 2001/06/05 20:04:09 jongfoster - * Now uses _snprintf() in place of snprintf() under Win32. - * - * Revision 1.11 2001/06/04 18:31:58 swa - * files are now prefixed with either `confdir' or `logdir'. - * `make redhat-dist' replaces both entries confdir and logdir - * with redhat values - * - * Revision 1.10 2001/06/03 19:11:54 oes - * introduced confdir option - * - * Revision 1.9 2001/06/01 20:06:24 jongfoster - * Removed support for "tinygif" option - moved to actions file. - * - * Revision 1.8 2001/05/31 21:27:13 jongfoster - * Removed many options from the config file and into the - * "actions" file: add_forwarded, suppress_vanilla_wafer, - * wafer, add_header, user_agent, referer, from - * Also globally replaced "permission" with "action". - * - * Revision 1.7 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.6 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.5 2001/05/25 22:34:30 jongfoster - * Hard tabs->Spaces - * - * Revision 1.4 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.3 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.2 2001/05/17 23:01:01 oes - * - Cleaned CRLF's from the sources and related files - * - * Revision 1.1.1.1 2001/05/15 13:58:58 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <sys/types.h> -#include <stdlib.h> -#include <string.h> -#include <signal.h> -#include <fcntl.h> -#include <errno.h> -#include <ctype.h> -#include <assert.h> - -#ifdef _WIN32 - -# ifndef STRICT -# define STRICT -# endif -# include <windows.h> - -# include "win32.h" -# ifndef _WIN_CONSOLE -# include "w32log.h" -# endif /* ndef _WIN_CONSOLE */ - -#else /* ifndef _WIN32 */ - -#ifndef __OS2__ -# include <unistd.h> -# include <sys/wait.h> -#endif -# include <sys/time.h> -# include <sys/stat.h> -# include <signal.h> - -#endif - -#include "loadcfg.h" -#include "list.h" -#include "jcc.h" -#include "filters.h" -#include "loaders.h" -#include "miscutil.h" -#include "errlog.h" -#include "ssplit.h" -#include "encode.h" -#include "urlmatch.h" -#include "cgi.h" -#include "gateway.h" - -const char loadcfg_h_rcs[] = LOADCFG_H_VERSION; - -/* - * Fix a problem with Solaris. There should be no effect on other - * platforms. - * Solaris's isspace() is a macro which uses it's argument directly - * as an array index. Therefore we need to make sure that high-bit - * characters generate +ve values, and ideally we also want to make - * the argument match the declared parameter type of "int". - */ -#define ijb_isupper(__X) isupper((int)(unsigned char)(__X)) -#define ijb_tolower(__X) tolower((int)(unsigned char)(__X)) - -#ifdef FEATURE_TOGGLE -/* Privoxy is enabled by default. */ -int global_toggle_state = 1; -#endif /* def FEATURE_TOGGLE */ - -/* The filename of the configfile */ -const char *configfile = NULL; - -/* - * CGI functions will later need access to the invocation args, - * so we will make argc and argv global. - */ -int Argc = 0; -const char **Argv = NULL; - -static struct file_list *current_configfile = NULL; - - -/* - * This takes the "cryptic" hash of each keyword and aliases them to - * something a little more readable. This also makes changing the - * hash values easier if they should change or the hash algorthm changes. - * Use the included "hash" program to find out what the hash will be - * for any string supplied on the command line. (Or just put it in the - * config file and read the number from the error message in the log). - * - * Please keep this list sorted alphabetically (but with the Windows - * console and GUI specific options last). - */ - -#define hash_actions_file 1196306641ul /* "actionsfile" */ -#define hash_accept_intercepted_requests 1513024973ul /* "accept-intercepted-requests" */ -#define hash_admin_address 4112573064ul /* "admin-address" */ -#define hash_allow_cgi_request_crunching 258915987ul /* "allow-cgi-request-crunching" */ -#define hash_buffer_limit 1881726070ul /* "buffer-limit */ -#define hash_confdir 1978389ul /* "confdir" */ -#define hash_debug 78263ul /* "debug" */ -#define hash_deny_access 1227333715ul /* "deny-access" */ -#define hash_enable_edit_actions 2517097536ul /* "enable-edit-actions" */ -#define hash_enable_remote_toggle 2979744683ul /* "enable-remote-toggle" */ -#define hash_enable_remote_http_toggle 110543988ul /* "enable-remote-http-toggle" */ -#define hash_enforce_blocks 1862427469ul /* "enforce-blocks" */ -#define hash_filterfile 250887266ul /* "filterfile" */ -#define hash_forward 2029845ul /* "forward" */ -#define hash_forward_socks4 3963965521ul /* "forward-socks4" */ -#define hash_forward_socks4a 2639958518ul /* "forward-socks4a" */ -#define hash_forward_socks5 3963965522ul /* "forward-socks5" */ -#define hash_forwarded_connect_retries 101465292ul /* "forwarded-connect-retries" */ -#define hash_hostname 10308071ul /* "hostname" */ -#define hash_keep_alive_timeout 3878599515ul /* "keep-alive-timeout" */ -#define hash_listen_address 1255650842ul /* "listen-address" */ -#define hash_logdir 422889ul /* "logdir" */ -#define hash_logfile 2114766ul /* "logfile" */ -#define hash_permit_access 3587953268ul /* "permit-access" */ -#define hash_proxy_info_url 3903079059ul /* "proxy-info-url" */ -#define hash_single_threaded 4250084780ul /* "single-threaded" */ -#define hash_socket_timeout 1809001761ul /* "socket-timeout" */ -#define hash_split_large_cgi_forms 671658948ul /* "split-large-cgi-forms" */ -#define hash_suppress_blocklists 1948693308ul /* "suppress-blocklists" */ -#define hash_templdir 11067889ul /* "templdir" */ -#define hash_toggle 447966ul /* "toggle" */ -#define hash_trust_info_url 430331967ul /* "trust-info-url" */ -#define hash_trustfile 56494766ul /* "trustfile" */ -#define hash_usermanual 1416668518ul /* "user-manual" */ -#define hash_activity_animation 1817904738ul /* "activity-animation" */ -#define hash_close_button_minimizes 3651284693ul /* "close-button-minimizes" */ -#define hash_hide_console 2048809870ul /* "hide-console" */ -#define hash_log_buffer_size 2918070425ul /* "log-buffer-size" */ -#define hash_log_font_name 2866730124ul /* "log-font-name" */ -#define hash_log_font_size 2866731014ul /* "log-font-size" */ -#define hash_log_highlight_messages 4032101240ul /* "log-highlight-messages" */ -#define hash_log_max_lines 2868344173ul /* "log-max-lines" */ -#define hash_log_messages 2291744899ul /* "log-messages" */ -#define hash_show_on_task_bar 215410365ul /* "show-on-task-bar" */ - - -static void savearg(char *command, char *argument, struct configuration_spec * config); - -/********************************************************************* - * - * Function : unload_configfile - * - * Description : Free the config structure and all components. - * - * Parameters : - * 1 : data: struct configuration_spec to unload - * - * Returns : N/A - * - *********************************************************************/ -static void unload_configfile (void * data) -{ - struct configuration_spec * config = (struct configuration_spec *)data; - struct forward_spec *cur_fwd = config->forward; - int i; - -#ifdef FEATURE_ACL - struct access_control_list *cur_acl = config->acl; - - while (cur_acl != NULL) - { - struct access_control_list * next_acl = cur_acl->next; - free(cur_acl); - cur_acl = next_acl; - } - config->acl = NULL; -#endif /* def FEATURE_ACL */ - - while (cur_fwd != NULL) - { - struct forward_spec * next_fwd = cur_fwd->next; - free_url_spec(cur_fwd->url); - - freez(cur_fwd->gateway_host); - freez(cur_fwd->forward_host); - free(cur_fwd); - cur_fwd = next_fwd; - } - config->forward = NULL; - - freez(config->confdir); - freez(config->logdir); - freez(config->templdir); - freez(config->hostname); - - freez(config->haddr); - freez(config->logfile); - - for (i = 0; i < MAX_AF_FILES; i++) - { - freez(config->actions_file_short[i]); - freez(config->actions_file[i]); - freez(config->re_filterfile_short[i]); - freez(config->re_filterfile[i]); - } - - freez(config->admin_address); - freez(config->proxy_info_url); - freez(config->proxy_args); - freez(config->usermanual); - -#ifdef FEATURE_TRUST - freez(config->trustfile); - list_remove_all(config->trust_info); -#endif /* def FEATURE_TRUST */ - - for (i = 0; i < MAX_AF_FILES; i++) - { - freez(config->re_filterfile[i]); - } - - freez(config); -} - - -#ifdef FEATURE_GRACEFUL_TERMINATION -/********************************************************************* - * - * Function : unload_current_config_file - * - * Description : Unloads current config file - reset to state at - * beginning of program. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void unload_current_config_file(void) -{ - if (current_configfile) - { - current_configfile->unloader = unload_configfile; - current_configfile = NULL; - } -} -#endif - - -/********************************************************************* - * - * Function : load_config - * - * Description : Load the config file and all parameters. - * - * XXX: more than thousand lines long - * and thus in serious need of refactoring. - * - * Parameters : None - * - * Returns : The configuration_spec, or NULL on error. - * - *********************************************************************/ -struct configuration_spec * load_config(void) -{ - char buf[BUFFER_SIZE]; - char *p, *q; - FILE *configfp = NULL; - struct configuration_spec * config = NULL; - struct client_state * fake_csp; - struct file_list *fs; - unsigned long linenum = 0; - int i; - char *logfile = NULL; -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - int keep_alive_timeout = DEFAULT_KEEP_ALIVE_TIMEOUT; -#endif - - if (!check_file_changed(current_configfile, configfile, &fs)) - { - /* No need to load */ - return ((struct configuration_spec *)current_configfile->f); - } - if (NULL == fs) - { - log_error(LOG_LEVEL_FATAL, - "can't check configuration file '%s': %E", configfile); - return NULL; - } - - if (NULL != current_configfile) - { - log_error(LOG_LEVEL_INFO, "Reloading configuration file '%s'", configfile); - } - -#ifdef FEATURE_TOGGLE - global_toggle_state = 1; -#endif /* def FEATURE_TOGGLE */ - - fs->f = config = (struct configuration_spec *)zalloc(sizeof(*config)); - - if (NULL == config) - { - freez(fs->filename); - freez(fs); - log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); - return NULL; - } - - /* - * This is backwards from how it's usually done. - * Following the usual pattern, "fs" would be stored in a member - * variable in "csp", and then we'd access "config" from "fs->f", - * using a cast. However, "config" is used so often that a - * cast each time would be very ugly, and the extra indirection - * would waste CPU cycles. Therefore we store "config" in - * "csp->config", and "fs" in "csp->config->config_file_list". - */ - config->config_file_list = fs; - - /* - * Set to defaults - */ - config->multi_threaded = 1; - config->hport = HADDR_PORT; - config->buffer_limit = 4096 * 1024; - config->usermanual = strdup(USER_MANUAL_URL); - config->proxy_args = strdup(""); - config->forwarded_connect_retries = 0; - config->socket_timeout = 300; /* XXX: Should be a macro. */ - config->feature_flags &= ~RUNTIME_FEATURE_CGI_TOGGLE; - config->feature_flags &= ~RUNTIME_FEATURE_SPLIT_LARGE_FORMS; - config->feature_flags &= ~RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS; - - configfp = fopen(configfile, "r"); - if (NULL == configfp) - { - log_error(LOG_LEVEL_FATAL, - "can't open configuration file '%s': %E", configfile); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - } - - while (read_config_line(buf, sizeof(buf), configfp, &linenum) != NULL) - { - char cmd[BUFFER_SIZE]; - char arg[BUFFER_SIZE]; - char tmp[BUFFER_SIZE]; -#ifdef FEATURE_ACL - struct access_control_list *cur_acl; -#endif /* def FEATURE_ACL */ - struct forward_spec *cur_fwd; - int vec_count; - char *vec[3]; - unsigned long directive_hash; - - strlcpy(tmp, buf, sizeof(tmp)); - - /* Copy command (i.e. up to space or tab) into cmd */ - p = buf; - q = cmd; - while (*p && (*p != ' ') && (*p != '\t')) - { - *q++ = *p++; - } - *q = '\0'; - - /* Skip over the whitespace in buf */ - while (*p && ((*p == ' ') || (*p == '\t'))) - { - p++; - } - - /* Copy the argument into arg */ - strlcpy(arg, p, sizeof(arg)); - - /* Should never happen, but check this anyway */ - if (*cmd == '\0') - { - continue; - } - - /* Make sure the command field is lower case */ - for (p = cmd; *p; p++) - { - if (ijb_isupper(*p)) - { - *p = (char)ijb_tolower(*p); - } - } - - directive_hash = hash_string(cmd); - switch (directive_hash) - { -/* ************************************************************************* - * actionsfile actions-file-name - * In confdir by default - * *************************************************************************/ - case hash_actions_file : - i = 0; - while ((i < MAX_AF_FILES) && (NULL != config->actions_file[i])) - { - i++; - } - - if (i >= MAX_AF_FILES) - { - log_error(LOG_LEVEL_FATAL, "Too many 'actionsfile' directives in config file - limit is %d.\n" - "(You can increase this limit by changing MAX_AF_FILES in project.h and recompiling).", - MAX_AF_FILES); - } - config->actions_file_short[i] = strdup(arg); - config->actions_file[i] = make_path(config->confdir, arg); - - break; -/* ************************************************************************* - * accept-intercepted-requests - * *************************************************************************/ - case hash_accept_intercepted_requests: - if ((*arg != '\0') && (0 != atoi(arg))) - { - config->feature_flags |= RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS; - } - break; - -/* ************************************************************************* - * admin-address email-address - * *************************************************************************/ - case hash_admin_address : - freez(config->admin_address); - config->admin_address = strdup(arg); - break; - -/* ************************************************************************* - * allow-cgi-request-crunching - * *************************************************************************/ - case hash_allow_cgi_request_crunching: - if ((*arg != '\0') && (0 != atoi(arg))) - { - config->feature_flags |= RUNTIME_FEATURE_CGI_CRUNCHING; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_CGI_CRUNCHING; - } - break; - -/* ************************************************************************* - * buffer-limit n - * *************************************************************************/ - case hash_buffer_limit : - config->buffer_limit = (size_t)(1024 * atoi(arg)); - break; - -/* ************************************************************************* - * confdir directory-name - * *************************************************************************/ - case hash_confdir : - freez(config->confdir); - config->confdir = make_path( NULL, arg); - break; - -/* ************************************************************************* - * debug n - * Specifies debug level, multiple values are ORed together. - * *************************************************************************/ - case hash_debug : - config->debug |= atoi(arg); - break; - -/* ************************************************************************* - * deny-access source-ip[/significant-bits] [dest-ip[/significant-bits]] - * *************************************************************************/ -#ifdef FEATURE_ACL - case hash_deny_access: - strlcpy(tmp, arg, sizeof(tmp)); - vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1); - - if ((vec_count != 1) && (vec_count != 2)) - { - log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " - "deny-access directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Wrong number of parameters for " - "deny-access directive in configuration file.<br><br>\n"); - break; - } - - /* allocate a new node */ - cur_acl = (struct access_control_list *) zalloc(sizeof(*cur_acl)); - - if (cur_acl == NULL) - { - log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - break; - } - cur_acl->action = ACL_DENY; - - if (acl_addr(vec[0], cur_acl->src) < 0) - { - log_error(LOG_LEVEL_ERROR, "Invalid source address, port or netmask " - "for deny-access directive in configuration file: \"%s\"", vec[0]); - string_append(&config->proxy_args, - "<br>\nWARNING: Invalid source address, port or netmask " - "for deny-access directive in configuration file: \""); - string_append(&config->proxy_args, - vec[0]); - string_append(&config->proxy_args, - "\"<br><br>\n"); - freez(cur_acl); - break; - } - if (vec_count == 2) - { - if (acl_addr(vec[1], cur_acl->dst) < 0) - { - log_error(LOG_LEVEL_ERROR, "Invalid destination address, port or netmask " - "for deny-access directive in configuration file: \"%s\"", vec[1]); - string_append(&config->proxy_args, - "<br>\nWARNING: Invalid destination address, port or netmask " - "for deny-access directive in configuration file: \""); - string_append(&config->proxy_args, - vec[1]); - string_append(&config->proxy_args, - "\"<br><br>\n"); - freez(cur_acl); - break; - } - } - - /* - * Add it to the list. Note we reverse the list to get the - * behaviour the user expects. With both the ACL and - * actions file, the last match wins. However, the internal - * implementations are different: The actions file is stored - * in the same order as the file, and scanned completely. - * With the ACL, we reverse the order as we load it, then - * when we scan it we stop as soon as we get a match. - */ - cur_acl->next = config->acl; - config->acl = cur_acl; - - break; -#endif /* def FEATURE_ACL */ - -/* ************************************************************************* - * enable-edit-actions 0|1 - * *************************************************************************/ -#ifdef FEATURE_CGI_EDIT_ACTIONS - case hash_enable_edit_actions: - if ((*arg != '\0') && (0 != atoi(arg))) - { - config->feature_flags |= RUNTIME_FEATURE_CGI_EDIT_ACTIONS; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_CGI_EDIT_ACTIONS; - } - break; -#endif /* def FEATURE_CGI_EDIT_ACTIONS */ - -/* ************************************************************************* - * enable-remote-toggle 0|1 - * *************************************************************************/ -#ifdef FEATURE_TOGGLE - case hash_enable_remote_toggle: - if ((*arg != '\0') && (0 != atoi(arg))) - { - config->feature_flags |= RUNTIME_FEATURE_CGI_TOGGLE; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_CGI_TOGGLE; - } - break; -#endif /* def FEATURE_TOGGLE */ - -/* ************************************************************************* - * enable-remote-http-toggle 0|1 - * *************************************************************************/ - case hash_enable_remote_http_toggle: - if ((*arg != '\0') && (0 != atoi(arg))) - { - config->feature_flags |= RUNTIME_FEATURE_HTTP_TOGGLE; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_HTTP_TOGGLE; - } - break; - -/* ************************************************************************* - * enforce-blocks 0|1 - * *************************************************************************/ - case hash_enforce_blocks: -#ifdef FEATURE_FORCE_LOAD - if ((*arg != '\0') && (0 != atoi(arg))) - { - config->feature_flags |= RUNTIME_FEATURE_ENFORCE_BLOCKS; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_ENFORCE_BLOCKS; - } -#else - log_error(LOG_LEVEL_ERROR, "Ignoring directive 'enforce-blocks'. " - "FEATURE_FORCE_LOAD is disabled, blocks will always be enforced."); -#endif /* def FEATURE_FORCE_LOAD */ - break; - -/* ************************************************************************* - * filterfile file-name - * In confdir by default. - * *************************************************************************/ - case hash_filterfile : - i = 0; - while ((i < MAX_AF_FILES) && (NULL != config->re_filterfile[i])) - { - i++; - } - - if (i >= MAX_AF_FILES) - { - log_error(LOG_LEVEL_FATAL, "Too many 'filterfile' directives in config file - limit is %d.\n" - "(You can increase this limit by changing MAX_AF_FILES in project.h and recompiling).", - MAX_AF_FILES); - } - config->re_filterfile_short[i] = strdup(arg); - config->re_filterfile[i] = make_path(config->confdir, arg); - - break; - -/* ************************************************************************* - * forward url-pattern (.|http-proxy-host[:port]) - * *************************************************************************/ - case hash_forward: - strlcpy(tmp, arg, sizeof(tmp)); - vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1); - - if (vec_count != 2) - { - log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for forward " - "directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Wrong number of parameters for " - "forward directive in configuration file."); - break; - } - - /* allocate a new node */ - cur_fwd = zalloc(sizeof(*cur_fwd)); - if (cur_fwd == NULL) - { - log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - break; - } - - cur_fwd->type = SOCKS_NONE; - - /* Save the URL pattern */ - if (create_url_spec(cur_fwd->url, vec[0])) - { - log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward " - "directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Bad URL specifier for " - "forward directive in configuration file."); - break; - } - - /* Parse the parent HTTP proxy host:port */ - p = vec[1]; - - if (strcmp(p, ".") != 0) - { - cur_fwd->forward_host = strdup(p); - - if (NULL != (p = strchr(cur_fwd->forward_host, ':'))) - { - *p++ = '\0'; - cur_fwd->forward_port = atoi(p); - } - - if (cur_fwd->forward_port <= 0) - { - cur_fwd->forward_port = 8000; - } - } - - /* Add to list. */ - cur_fwd->next = config->forward; - config->forward = cur_fwd; - - break; - -/* ************************************************************************* - * forward-socks4 url-pattern socks-proxy[:port] (.|http-proxy[:port]) - * *************************************************************************/ - case hash_forward_socks4: - strlcpy(tmp, arg, sizeof(tmp)); - vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1); - - if (vec_count != 3) - { - log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " - "forward-socks4 directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Wrong number of parameters for " - "forward-socks4 directive in configuration file."); - break; - } - - /* allocate a new node */ - cur_fwd = zalloc(sizeof(*cur_fwd)); - if (cur_fwd == NULL) - { - log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - break; - } - - cur_fwd->type = SOCKS_4; - - /* Save the URL pattern */ - if (create_url_spec(cur_fwd->url, vec[0])) - { - log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward-socks4 " - "directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Bad URL specifier for " - "forward-socks4 directive in configuration file."); - break; - } - - /* Parse the SOCKS proxy host[:port] */ - p = vec[1]; - - if (strcmp(p, ".") != 0) - { - cur_fwd->gateway_host = strdup(p); - - if (NULL != (p = strchr(cur_fwd->gateway_host, ':'))) - { - *p++ = '\0'; - cur_fwd->gateway_port = atoi(p); - } - if (cur_fwd->gateway_port <= 0) - { - cur_fwd->gateway_port = 1080; - } - } - - /* Parse the parent HTTP proxy host[:port] */ - p = vec[2]; - - if (strcmp(p, ".") != 0) - { - cur_fwd->forward_host = strdup(p); - - if (NULL != (p = strchr(cur_fwd->forward_host, ':'))) - { - *p++ = '\0'; - cur_fwd->forward_port = atoi(p); - } - - if (cur_fwd->forward_port <= 0) - { - cur_fwd->forward_port = 8000; - } - } - - /* Add to list. */ - cur_fwd->next = config->forward; - config->forward = cur_fwd; - - break; - -/* ************************************************************************* - * forward-socks4a url-pattern socks-proxy[:port] (.|http-proxy[:port]) - * *************************************************************************/ - case hash_forward_socks4a: - case hash_forward_socks5: - strlcpy(tmp, arg, sizeof(tmp)); - vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1); - - if (vec_count != 3) - { - log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " - "forward-socks4a directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Wrong number of parameters for " - "forward-socks4a directive in configuration file."); - break; - } - - /* allocate a new node */ - cur_fwd = zalloc(sizeof(*cur_fwd)); - if (cur_fwd == NULL) - { - log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - break; - } - - if (directive_hash == hash_forward_socks4a) - { - cur_fwd->type = SOCKS_4A; - } - else - { - cur_fwd->type = SOCKS_5; - } - - /* Save the URL pattern */ - if (create_url_spec(cur_fwd->url, vec[0])) - { - log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward-socks4a " - "directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Bad URL specifier for " - "forward-socks4a directive in configuration file."); - break; - } - - /* Parse the SOCKS proxy host[:port] */ - p = vec[1]; - - cur_fwd->gateway_host = strdup(p); - - if (NULL != (p = strchr(cur_fwd->gateway_host, ':'))) - { - *p++ = '\0'; - cur_fwd->gateway_port = atoi(p); - } - if (cur_fwd->gateway_port <= 0) - { - cur_fwd->gateway_port = 1080; - } - - /* Parse the parent HTTP proxy host[:port] */ - p = vec[2]; - - if (strcmp(p, ".") != 0) - { - cur_fwd->forward_host = strdup(p); - - if (NULL != (p = strchr(cur_fwd->forward_host, ':'))) - { - *p++ = '\0'; - cur_fwd->forward_port = atoi(p); - } - - if (cur_fwd->forward_port <= 0) - { - cur_fwd->forward_port = 8000; - } - } - - /* Add to list. */ - cur_fwd->next = config->forward; - config->forward = cur_fwd; - - break; - -/* ************************************************************************* - * forwarded-connect-retries n - * *************************************************************************/ - case hash_forwarded_connect_retries : - config->forwarded_connect_retries = atoi(arg); - break; - -/* ************************************************************************* - * hostname hostname-to-show-on-cgi-pages - * *************************************************************************/ - case hash_hostname : - freez(config->hostname); - config->hostname = strdup(arg); - if (NULL == config->hostname) - { - log_error(LOG_LEVEL_FATAL, "Out of memory saving hostname."); - } - break; - -/* ************************************************************************* - * keep-alive-timeout timeout - * *************************************************************************/ -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - case hash_keep_alive_timeout : - if (*arg != '\0') - { - int timeout = atoi(arg); - if (0 <= timeout) - { - config->feature_flags |= RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE; - keep_alive_timeout = timeout; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE; - } - } - break; -#endif - -/* ************************************************************************* - * listen-address [ip][:port] - * *************************************************************************/ - case hash_listen_address : - freez(config->haddr); - config->haddr = strdup(arg); - break; - -/* ************************************************************************* - * logdir directory-name - * *************************************************************************/ - case hash_logdir : - freez(config->logdir); - config->logdir = make_path(NULL, arg); - break; - -/* ************************************************************************* - * logfile log-file-name - * In logdir by default - * *************************************************************************/ - case hash_logfile : - if (!no_daemon) - { - logfile = make_path(config->logdir, arg); - if (NULL == logfile) - { - log_error(LOG_LEVEL_FATAL, "Out of memory while creating logfile path"); - } - } - break; - -/* ************************************************************************* - * permit-access source-ip[/significant-bits] [dest-ip[/significant-bits]] - * *************************************************************************/ -#ifdef FEATURE_ACL - case hash_permit_access: - strlcpy(tmp, arg, sizeof(tmp)); - vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1); - - if ((vec_count != 1) && (vec_count != 2)) - { - log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for " - "permit-access directive in configuration file."); - string_append(&config->proxy_args, - "<br>\nWARNING: Wrong number of parameters for " - "permit-access directive in configuration file.<br><br>\n"); - - break; - } - - /* allocate a new node */ - cur_acl = (struct access_control_list *) zalloc(sizeof(*cur_acl)); - - if (cur_acl == NULL) - { - log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration"); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - break; - } - cur_acl->action = ACL_PERMIT; - - if (acl_addr(vec[0], cur_acl->src) < 0) - { - log_error(LOG_LEVEL_ERROR, "Invalid source address, port or netmask " - "for permit-access directive in configuration file: \"%s\"", vec[0]); - string_append(&config->proxy_args, - "<br>\nWARNING: Invalid source address, port or netmask for " - "permit-access directive in configuration file: \""); - string_append(&config->proxy_args, - vec[0]); - string_append(&config->proxy_args, - "\"<br><br>\n"); - freez(cur_acl); - break; - } - if (vec_count == 2) - { - if (acl_addr(vec[1], cur_acl->dst) < 0) - { - log_error(LOG_LEVEL_ERROR, "Invalid destination address, port or netmask " - "for permit-access directive in configuration file: \"%s\"", vec[1]); - string_append(&config->proxy_args, - "<br>\nWARNING: Invalid destination address, port or netmask for " - "permit-access directive in configuration file: \""); - string_append(&config->proxy_args, - vec[1]); - string_append(&config->proxy_args, - "\"<br><br>\n"); - freez(cur_acl); - break; - } - } - - /* - * Add it to the list. Note we reverse the list to get the - * behaviour the user expects. With both the ACL and - * actions file, the last match wins. However, the internal - * implementations are different: The actions file is stored - * in the same order as the file, and scanned completely. - * With the ACL, we reverse the order as we load it, then - * when we scan it we stop as soon as we get a match. - */ - cur_acl->next = config->acl; - config->acl = cur_acl; - - break; -#endif /* def FEATURE_ACL */ - -/* ************************************************************************* - * proxy-info-url url - * *************************************************************************/ - case hash_proxy_info_url : - freez(config->proxy_info_url); - config->proxy_info_url = strdup(arg); - break; - -/* ************************************************************************* - * single-threaded - * *************************************************************************/ - case hash_single_threaded : - config->multi_threaded = 0; - break; - -/* ************************************************************************* - * socket-timeout numer_of_seconds - * *************************************************************************/ - case hash_socket_timeout : - if (*arg != '\0') - { - int socket_timeout = atoi(arg); - if (0 < socket_timeout) - { - config->socket_timeout = socket_timeout; - } - else - { - log_error(LOG_LEVEL_FATAL, - "Invalid socket-timeout: '%s'", arg); - } - } - break; - -/* ************************************************************************* - * split-large-cgi-forms - * *************************************************************************/ - case hash_split_large_cgi_forms : - if ((*arg != '\0') && (0 != atoi(arg))) - { - config->feature_flags |= RUNTIME_FEATURE_SPLIT_LARGE_FORMS; - } - else - { - config->feature_flags &= ~RUNTIME_FEATURE_SPLIT_LARGE_FORMS; - } - break; - -/* ************************************************************************* - * templdir directory-name - * *************************************************************************/ - case hash_templdir : - freez(config->templdir); - config->templdir = make_path(NULL, arg); - break; - -/* ************************************************************************* - * toggle (0|1) - * *************************************************************************/ -#ifdef FEATURE_TOGGLE - case hash_toggle : - global_toggle_state = atoi(arg); - break; -#endif /* def FEATURE_TOGGLE */ - -/* ************************************************************************* - * trust-info-url url - * *************************************************************************/ -#ifdef FEATURE_TRUST - case hash_trust_info_url : - enlist(config->trust_info, arg); - break; -#endif /* def FEATURE_TRUST */ - -/* ************************************************************************* - * trustfile filename - * (In confdir by default.) - * *************************************************************************/ -#ifdef FEATURE_TRUST - case hash_trustfile : - freez(config->trustfile); - config->trustfile = make_path(config->confdir, arg); - break; -#endif /* def FEATURE_TRUST */ - -/* ************************************************************************* - * usermanual url - * *************************************************************************/ - case hash_usermanual : - /* - * XXX: If this isn't the first config directive, the - * show-status page links to the website documentation - * for the directives that were already parsed. Lame. - */ - freez(config->usermanual); - config->usermanual = strdup(arg); - break; - -/* ************************************************************************* - * Win32 Console options: - * *************************************************************************/ - -/* ************************************************************************* - * hide-console - * *************************************************************************/ -#ifdef _WIN_CONSOLE - case hash_hide_console : - hideConsole = 1; - break; -#endif /*def _WIN_CONSOLE*/ - - -/* ************************************************************************* - * Win32 GUI options: - * *************************************************************************/ - -#if defined(_WIN32) && ! defined(_WIN_CONSOLE) -/* ************************************************************************* - * activity-animation (0|1) - * *************************************************************************/ - case hash_activity_animation : - g_bShowActivityAnimation = atoi(arg); - break; - -/* ************************************************************************* - * close-button-minimizes (0|1) - * *************************************************************************/ - case hash_close_button_minimizes : - g_bCloseHidesWindow = atoi(arg); - break; - -/* ************************************************************************* - * log-buffer-size (0|1) - * *************************************************************************/ - case hash_log_buffer_size : - g_bLimitBufferSize = atoi(arg); - break; - -/* ************************************************************************* - * log-font-name fontname - * *************************************************************************/ - case hash_log_font_name : - if (strlcpy(g_szFontFaceName, arg, - sizeof(g_szFontFaceName)) >= sizeof(g_szFontFaceName)) - { - log_error(LOG_LEVEL_FATAL, - "log-font-name argument '%s' is longer than %u characters.", - arg, sizeof(g_szFontFaceName)-1); - } - break; - -/* ************************************************************************* - * log-font-size n - * *************************************************************************/ - case hash_log_font_size : - g_nFontSize = atoi(arg); - break; - -/* ************************************************************************* - * log-highlight-messages (0|1) - * *************************************************************************/ - case hash_log_highlight_messages : - g_bHighlightMessages = atoi(arg); - break; - -/* ************************************************************************* - * log-max-lines n - * *************************************************************************/ - case hash_log_max_lines : - g_nMaxBufferLines = atoi(arg); - break; - -/* ************************************************************************* - * log-messages (0|1) - * *************************************************************************/ - case hash_log_messages : - g_bLogMessages = atoi(arg); - break; - -/* ************************************************************************* - * show-on-task-bar (0|1) - * *************************************************************************/ - case hash_show_on_task_bar : - g_bShowOnTaskBar = atoi(arg); - break; - -#endif /* defined(_WIN32) && ! defined(_WIN_CONSOLE) */ - - -/* ************************************************************************* - * Warnings about unsupported features - * *************************************************************************/ -#ifndef FEATURE_ACL - case hash_deny_access: -#endif /* ndef FEATURE_ACL */ -#ifndef FEATURE_CGI_EDIT_ACTIONS - case hash_enable_edit_actions: -#endif /* ndef FEATURE_CGI_EDIT_ACTIONS */ -#ifndef FEATURE_TOGGLE - case hash_enable_remote_toggle: -#endif /* ndef FEATURE_TOGGLE */ -#ifndef FEATURE_ACL - case hash_permit_access: -#endif /* ndef FEATURE_ACL */ -#ifndef FEATURE_TOGGLE - case hash_toggle : -#endif /* ndef FEATURE_TOGGLE */ -#ifndef FEATURE_TRUST - case hash_trustfile : - case hash_trust_info_url : -#endif /* ndef FEATURE_TRUST */ - -#ifndef _WIN_CONSOLE - case hash_hide_console : -#endif /* ndef _WIN_CONSOLE */ - -#if defined(_WIN_CONSOLE) || ! defined(_WIN32) - case hash_activity_animation : - case hash_close_button_minimizes : - case hash_log_buffer_size : - case hash_log_font_name : - case hash_log_font_size : - case hash_log_highlight_messages : - case hash_log_max_lines : - case hash_log_messages : - case hash_show_on_task_bar : -#endif /* defined(_WIN_CONSOLE) || ! defined(_WIN32) */ - /* These warnings are annoying - so hide them. -- Jon */ - /* log_error(LOG_LEVEL_INFO, "Unsupported directive \"%s\" ignored.", cmd); */ - break; - -/* *************************************************************************/ - default : -/* *************************************************************************/ - /* - * I decided that I liked this better as a warning than an - * error. To change back to an error, just change log level - * to LOG_LEVEL_FATAL. - */ - log_error(LOG_LEVEL_ERROR, "Ignoring unrecognized directive '%s' (%luul) in line %lu " - "in configuration file (%s).", buf, directive_hash, linenum, configfile); - string_append(&config->proxy_args, - " <strong class='warning'>Warning: Ignoring unrecognized directive:</strong>"); - break; - -/* *************************************************************************/ - } /* end switch( hash_string(cmd) ) */ - - /* Save the argument for the show-status page. */ - savearg(cmd, arg, config); - - } /* end while ( read_config_line(...) ) */ - - fclose(configfp); - - set_debug_level(config->debug); - - freez(config->logfile); - - if (!no_daemon) - { - if (NULL != logfile) - { - config->logfile = logfile; - init_error_log(Argv[0], config->logfile); - } - else - { - disable_logging(); - } - } - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - if (config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE) - { - if (config->multi_threaded) - { - set_keep_alive_timeout(keep_alive_timeout); - } - else - { - /* - * While we could use keep-alive without multiple threads - * if we didn't bother with enforcing the connection timeout, - * that might make Tor users sad, even though they shouldn't - * enable the single-threaded option anyway. - */ - config->feature_flags &= ~RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE; - log_error(LOG_LEVEL_ERROR, - "Config option single-threaded disables connection keep-alive."); - } - } -#endif - - if (NULL == config->proxy_args) - { - log_error(LOG_LEVEL_FATAL, "Out of memory loading config - insufficient memory for config->proxy_args"); - } - - if (config->actions_file[0]) - { - add_loader(load_action_files, config); - } - - if (config->re_filterfile[0]) - { - add_loader(load_re_filterfiles, config); - } - -#ifdef FEATURE_TRUST - if (config->trustfile) - { - add_loader(load_trustfile, config); - } -#endif /* def FEATURE_TRUST */ - - if ( NULL == config->haddr ) - { - config->haddr = strdup( HADDR_DEFAULT ); - } - - if ( NULL != config->haddr ) - { - if (NULL != (p = strchr(config->haddr, ':'))) - { - *p++ = '\0'; - if (*p) - { - config->hport = atoi(p); - } - } - - if (config->hport <= 0) - { - *--p = ':'; - log_error(LOG_LEVEL_FATAL, "invalid bind port spec %s", config->haddr); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - } - if (*config->haddr == '\0') - { - /* - * Only the port specified. We stored it in config->hport - * and don't need its text representation anymore. - */ - freez(config->haddr); - } - } - - /* - * Want to run all the loaders once now. - * - * Need to set up a fake csp, so they can get to the config. - */ - fake_csp = (struct client_state *) zalloc (sizeof(*fake_csp)); - fake_csp->config = config; - - if (run_loader(fake_csp)) - { - freez(fake_csp); - log_error(LOG_LEVEL_FATAL, "A loader failed while loading config file. Exiting."); - /* Never get here - LOG_LEVEL_FATAL causes program exit */ - } - freez(fake_csp); - -/* FIXME: this is a kludge for win32 */ -#if defined(_WIN32) && !defined (_WIN_CONSOLE) - - g_default_actions_file = config->actions_file[1]; /* FIXME Hope this is default.action */ - g_user_actions_file = config->actions_file[2]; /* FIXME Hope this is user.action */ - g_re_filterfile = config->re_filterfile[0]; /* FIXME Hope this is default.filter */ - -#ifdef FEATURE_TRUST - g_trustfile = config->trustfile; -#endif /* def FEATURE_TRUST */ - - -#endif /* defined(_WIN32) && !defined (_WIN_CONSOLE) */ -/* FIXME: end kludge */ - - - config->need_bind = 1; - - if (current_configfile) - { - struct configuration_spec * oldcfg = (struct configuration_spec *) - current_configfile->f; - /* - * Check if config->haddr,hport == oldcfg->haddr,hport - * - * The following could be written more compactly as a single, - * (unreadably long) if statement. - */ - config->need_bind = 0; - if (config->hport != oldcfg->hport) - { - config->need_bind = 1; - } - else if (config->haddr == NULL) - { - if (oldcfg->haddr != NULL) - { - config->need_bind = 1; - } - } - else if (oldcfg->haddr == NULL) - { - config->need_bind = 1; - } - else if (0 != strcmp(config->haddr, oldcfg->haddr)) - { - config->need_bind = 1; - } - - current_configfile->unloader = unload_configfile; - } - - fs->next = files->next; - files->next = fs; - - current_configfile = fs; - - return (config); -} - - -/********************************************************************* - * - * Function : savearg - * - * Description : Called from `load_config'. It saves each non-empty - * and non-comment line from config into - * config->proxy_args. This is used to create the - * show-proxy-args page. On error, frees - * config->proxy_args and sets it to NULL - * - * Parameters : - * 1 : command = config setting that was found - * 2 : argument = the setting's argument (if any) - * 3 : config = Configuration to save into. - * - * Returns : N/A - * - *********************************************************************/ -static void savearg(char *command, char *argument, struct configuration_spec * config) -{ - char * buf; - char * s; - - assert(command); - assert(argument); - - /* - * Add config option name embedded in - * link to its section in the user-manual - */ - buf = strdup("\n<a href=\""); - if (!strncmpic(config->usermanual, "file://", 7) || - !strncmpic(config->usermanual, "http", 4)) - { - string_append(&buf, config->usermanual); - } - else - { - string_append(&buf, "http://" CGI_SITE_2_HOST "/user-manual/"); - } - string_append(&buf, CONFIG_HELP_PREFIX); - string_join (&buf, string_toupper(command)); - string_append(&buf, "\">"); - string_append(&buf, command); - string_append(&buf, "</a> "); - - if (NULL == buf) - { - freez(config->proxy_args); - return; - } - - if ( (NULL != argument) && ('\0' != *argument) ) - { - s = html_encode(argument); - if (NULL == s) - { - freez(buf); - freez(config->proxy_args); - return; - } - - if (strncmpic(argument, "http://", 7) == 0) - { - string_append(&buf, "<a href=\""); - string_append(&buf, s); - string_append(&buf, "\">"); - string_join (&buf, s); - string_append(&buf, "</a>"); - } - else - { - string_join (&buf, s); - } - } - - string_append(&buf, "<br>"); - string_join(&config->proxy_args, buf); -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/loadcfg.h b/external/privoxy/loadcfg.h deleted file mode 100644 index 80fc184..0000000 --- a/external/privoxy/loadcfg.h +++ /dev/null @@ -1,199 +0,0 @@ -#ifndef LOADCFG_H_INCLUDED -#define LOADCFG_H_INCLUDED -#define LOADCFG_H_VERSION "$Id: loadcfg.h,v 1.13 2006/07/18 14:48:46 david__schmidt Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/loadcfg.h,v $ - * - * Purpose : Loads settings from the configuration file into - * global variables. This file contains both the - * routine to load the configuration and the global - * variables it writes to. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: loadcfg.h,v $ - * Revision 1.13 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.11.2.1 2003/03/11 11:53:59 oes - * Cosmetic: Renamed cryptic variable - * - * Revision 1.11 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.10 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.9 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.8 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.7 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.6 2001/07/29 18:58:15 jongfoster - * Removing nested #includes, adding forward declarations for needed - * structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED. - * - * Revision 1.5 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.4 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.3 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.2 2001/05/17 23:01:01 oes - * - Cleaned CRLF's from the sources and related files - * - * Revision 1.1.1.1 2001/05/15 13:58:58 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -/* Don't need project.h, only this: */ -struct configuration_spec; - -/* Global variables */ - -#ifdef FEATURE_TOGGLE -/* Privoxy's toggle state */ -extern int global_toggle_state; -#endif /* def FEATURE_TOGGLE */ - -extern const char *configfile; - - -/* The load_config function is now going to call: - * init_proxy_args, so it will need argc and argv. - * Since load_config will also be a signal handler, - * we need to have these globally available. - */ -extern int Argc; -extern const char **Argv; -extern short int MustReload; - - -extern struct configuration_spec * load_config(void); - -#ifdef FEATURE_GRACEFUL_TERMINATION -void unload_current_config_file(void); -#endif - -/* Revision control strings from this header and associated .c file */ -extern const char loadcfg_rcs[]; -extern const char loadcfg_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef LOADCFG_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/loaders.c b/external/privoxy/loaders.c deleted file mode 100644 index b796634..0000000 --- a/external/privoxy/loaders.c +++ /dev/null @@ -1,1762 +0,0 @@ -const char loaders_rcs[] = "$Id: loaders.c,v 1.71 2009/03/04 18:24:47 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/loaders.c,v $ - * - * Purpose : Functions to load and unload the various - * configuration files. Also contains code to manage - * the list of active loaders, and to automatically - * unload files that are no longer in use. - * - * Copyright : Written by and Copyright (C) 2001-2009 the - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: loaders.c,v $ - * Revision 1.71 2009/03/04 18:24:47 fabiankeil - * No need to create empty strings manually, strdup("") FTW. - * - * Revision 1.70 2009/03/01 18:34:24 fabiankeil - * Help clang understand that we aren't dereferencing - * NULL pointers here. - * - * Revision 1.69 2008/09/21 13:36:52 fabiankeil - * If change-x-forwarded-for{add} is used and the client - * sends multiple X-Forwarded-For headers, append the client's - * IP address to each one of them. "Traditionally" we would - * lose all but the last one. - * - * Revision 1.68 2008/09/19 15:26:28 fabiankeil - * Add change-x-forwarded-for{} action to block or add - * X-Forwarded-For headers. Mostly based on code removed - * before 3.0.7. - * - * Revision 1.67 2008/03/30 14:52:08 fabiankeil - * Rename load_actions_file() and load_re_filterfile() - * as they load multiple files "now". - * - * Revision 1.66 2008/03/21 11:16:30 fabiankeil - * Garbage-collect csp->my_ip_addr_str and csp->my_hostname. - * - * Revision 1.65 2007/12/07 18:29:23 fabiankeil - * Remove now-obsolete csp member x_forwarded. - * - * Revision 1.64 2007/06/01 14:12:38 fabiankeil - * Add unload_forward_spec() in preparation for forward-override{}. - * - * Revision 1.63 2007/05/14 10:41:15 fabiankeil - * Ditch the csp member cookie_list[] which isn't used anymore. - * - * Revision 1.62 2007/04/30 15:02:18 fabiankeil - * Introduce dynamic pcrs jobs that can resolve variables. - * - * Revision 1.61 2007/04/15 16:39:21 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.60 2007/03/20 15:16:34 fabiankeil - * Use dedicated header filter actions instead of abusing "filter". - * Replace "filter-client-headers" and "filter-client-headers" - * with "server-header-filter" and "client-header-filter". - * - * Revision 1.59 2007/01/25 13:38:20 fabiankeil - * Freez csp->error_message in sweep(). - * - * Revision 1.58 2006/12/31 14:25:20 fabiankeil - * Fix gcc43 compiler warnings. - * - * Revision 1.57 2006/12/21 12:22:22 fabiankeil - * html_encode filter descriptions. - * - * Have "Ignoring job ..." error messages - * print the filter file name correctly. - * - * Revision 1.56 2006/09/07 10:40:30 fabiankeil - * Turns out trusted referrers above our arbitrary - * limit are downgraded too ordinary trusted URLs. - * Adjusted error message. - * - * Revision 1.55 2006/09/07 10:25:39 fabiankeil - * Fix typo. - * - * Revision 1.54 2006/09/07 10:22:20 fabiankeil - * If too many trusted referrers are used, - * print only one error message instead of logging - * every single trusted referrer above the arbitrary - * limit. - * - * Revision 1.53 2006/08/31 16:25:06 fabiankeil - * Work around a buffer overflow that caused Privoxy to - * segfault if too many trusted referrers were used. Good - * enough for now, but should be replaced with a real - * solution after the next release. - * - * Revision 1.52 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.50.2.8 2006/01/30 15:16:25 david__schmidt - * Remove a little residual debugging info - * - * Revision 1.50.2.7 2006/01/29 23:10:56 david__schmidt - * Multiple filter file support - * - * Revision 1.50.2.6 2003/10/24 10:17:54 oes - * Nit: Allowed tabs as separators in filter headings - * - * Revision 1.50.2.5 2003/05/08 15:19:15 oes - * sweep: Made loop structure of sweep step mirror that of mark step - * - * Revision 1.50.2.4 2003/05/06 15:57:12 oes - * Bugfix: Update last_active pointer in sweep() before - * leaving an active client. Closes bugs #724395, #727882 - * - * Revision 1.50.2.3 2002/11/20 17:12:30 oes - * Ooops, forgot one change. - * - * Revision 1.50.2.2 2002/11/20 14:38:15 oes - * Fixed delayed/incomplete freeing of client resources and - * simplified loop structure in sweep. - * Thanks to Oliver Stoeneberg for the hint. - * - * Revision 1.50.2.1 2002/07/26 15:19:24 oes - * - PCRS jobs now chained in order of appearance. Previous - * reverse chaining was counter-intuitive. - * - Changed loglevel of PCRS job compile errors to - * LOG_LEVEL_ERROR - * - * Revision 1.50 2002/04/24 02:12:16 oes - * Jon's multiple AF patch: Sweep now takes care of all AFs - * - * Revision 1.49 2002/04/19 16:53:25 jongfoster - * Optimize away a function call by using an equivalent macro - * - * Revision 1.48 2002/04/05 00:56:09 gliptak - * Correcting typo to clean up on realloc failure - * - * Revision 1.47 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.46 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.45 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.44 2002/03/16 21:51:00 jongfoster - * Fixing free(NULL). - * - * Revision 1.43 2002/03/16 20:28:34 oes - * Added descriptions to the filters so users will know what they select in the cgi editor - * - * Revision 1.42 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.41 2002/03/12 01:42:50 oes - * Introduced modular filters - * - * Revision 1.40 2002/03/08 17:46:04 jongfoster - * Fixing int/size_t warnings - * - * Revision 1.39 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.38 2002/03/06 22:54:35 jongfoster - * Automated function-comment nitpicking. - * - * Revision 1.37 2002/03/03 15:07:49 oes - * Re-enabled automatic config reloading - * - * Revision 1.36 2002/01/22 23:46:18 jongfoster - * Moving edit_read_line() and simple_read_line() to loaders.c, and - * extending them to support reading MS-DOS, Mac and UNIX style files - * on all platforms. - * - * Modifying read_config_line() (without changing it's prototype) to - * be a trivial wrapper for edit_read_line(). This means that we have - * one function to read a line and handle comments, which is common - * between the initialization code and the edit interface. - * - * Revision 1.35 2002/01/17 21:03:08 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Renaming free_url to free_url_spec, since it frees a struct url_spec. - * - * Revision 1.34 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.33 2001/11/13 00:16:38 jongfoster - * Replacing references to malloc.h with the standard stdlib.h - * (See ANSI or K&R 2nd Ed) - * - * Revision 1.32 2001/11/07 00:02:13 steudten - * Add line number in error output for lineparsing for - * actionsfile and configfile. - * Special handling for CLF added. - * - * Revision 1.31 2001/10/26 17:39:01 oes - * Removed csp->referrer - * Moved ijb_isspace and ijb_tolower to project.h - * - * Revision 1.30 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.29 2001/10/23 21:38:53 jongfoster - * Adding error-checking to create_url_spec() - * - * Revision 1.28 2001/10/07 15:40:39 oes - * Replaced 6 boolean members of csp with one bitmap (csp->flags) - * - * Revision 1.27 2001/09/22 16:36:59 jongfoster - * Removing unused parameter fs from read_config_line() - * - * Revision 1.26 2001/09/22 14:05:22 jongfoster - * Bugfix: Multiple escaped "#" characters in a configuration - * file are now permitted. - * Also removing 3 unused headers. - * - * Revision 1.25 2001/09/13 22:44:03 jongfoster - * Adding {} to an if statement - * - * Revision 1.24 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.23 2001/07/20 15:51:54 oes - * Fixed indentation of prepocessor commands - * - * Revision 1.22 2001/07/20 15:16:17 haroon - * - per Guy's suggestion, added a while loop in sweep() to catch not just - * the last inactive CSP but all other consecutive inactive CSPs after that - * as well - * - * Revision 1.21 2001/07/18 17:26:24 oes - * Changed to conform to new pcrs interface - * - * Revision 1.20 2001/07/17 13:07:01 oes - * Fixed segv when last line in config files - * lacked a terminating (\r)\n - * - * Revision 1.19 2001/07/13 14:01:54 oes - * Removed all #ifdef PCRS - * - * Revision 1.18 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.17 2001/06/29 13:31:51 oes - * Various adaptions - * - * Revision 1.16 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.15 2001/06/07 23:14:14 jongfoster - * Removing ACL and forward file loaders - these - * files have been merged into the config file. - * Cosmetic: Moving unloader funcs next to their - * respective loader funcs - * - * Revision 1.14 2001/06/01 03:27:04 oes - * Fixed line continuation problem - * - * Revision 1.13 2001/05/31 21:28:49 jongfoster - * Removed all permissionsfile code - it's now called the actions - * file, and (almost) all the code is in actions.c - * - * Revision 1.12 2001/05/31 17:32:31 oes - * - * - Enhanced domain part globbing with infix and prefix asterisk - * matching and optional unanchored operation - * - * Revision 1.11 2001/05/29 23:25:24 oes - * - * - load_config_line() and load_permissions_file() now use chomp() - * - * Revision 1.10 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.9 2001/05/26 17:12:07 jongfoster - * Fatal errors loading configuration files now give better error messages. - * - * Revision 1.8 2001/05/26 00:55:20 jongfoster - * Removing duplicated code. load_forwardfile() now uses create_url_spec() - * - * Revision 1.7 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.6 2001/05/23 12:27:33 oes - * - * Fixed ugly indentation of my last changes - * - * Revision 1.5 2001/05/23 10:39:05 oes - * - Added support for escaping the comment character - * in config files by a backslash - * - Added support for line continuation in config - * files - * - Fixed a buffer overflow bug with long config lines - * - * Revision 1.4 2001/05/22 18:56:28 oes - * CRLF -> LF - * - * Revision 1.3 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.2 2001/05/17 23:01:01 oes - * - Cleaned CRLF's from the sources and related files - * - * Revision 1.1.1.1 2001/05/15 13:58:59 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <stdlib.h> -#include <sys/types.h> -#include <string.h> -#include <errno.h> -#include <sys/stat.h> -#include <ctype.h> -#include <assert.h> - -#if !defined(_WIN32) && !defined(__OS2__) -#include <unistd.h> -#endif - -#include "project.h" -#include "list.h" -#include "loaders.h" -#include "filters.h" -#include "parsers.h" -#include "jcc.h" -#include "miscutil.h" -#include "errlog.h" -#include "actions.h" -#include "urlmatch.h" -#include "encode.h" - -const char loaders_h_rcs[] = LOADERS_H_VERSION; - -/* - * Currently active files. - * These are also entered in the main linked list of files. - */ - -#ifdef FEATURE_TRUST -static struct file_list *current_trustfile = NULL; -#endif /* def FEATURE_TRUST */ - -static int load_one_re_filterfile(struct client_state *csp, int fileid); - -static struct file_list *current_re_filterfile[MAX_AF_FILES] = { - NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL -}; - -/* - * Pseudo filter type for load_one_re_filterfile - */ -#define NO_NEW_FILTER -1 - - -/********************************************************************* - * - * Function : sweep - * - * Description : Basically a mark and sweep garbage collector, it is run - * (by the parent thread) every once in a while to reclaim memory. - * - * It uses a mark and sweep strategy: - * 1) mark all files as inactive - * - * 2) check with each client: - * if it is active, mark its files as active - * if it is inactive, free its resources - * - * 3) free the resources of all of the files that - * are still marked as inactive (and are obsolete). - * - * N.B. files that are not obsolete don't have an unloader defined. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void sweep(void) -{ - struct file_list *fl, *nfl; - struct client_state *csp, *last_active; - int i; - - /* clear all of the file's active flags */ - for ( fl = files->next; NULL != fl; fl = fl->next ) - { - fl->active = 0; - } - - last_active = clients; - csp = clients->next; - - while (NULL != csp) - { - if (csp->flags & CSP_FLAG_ACTIVE) - { - /* Mark this client's files as active */ - - /* - * Always have a configuration file. - * (Also note the slightly non-standard extra - * indirection here.) - */ - csp->config->config_file_list->active = 1; - - /* - * Actions files - */ - for (i = 0; i < MAX_AF_FILES; i++) - { - if (csp->actions_list[i]) - { - csp->actions_list[i]->active = 1; - } - } - - /* - * Filter files - */ - for (i = 0; i < MAX_AF_FILES; i++) - { - if (csp->rlist[i]) - { - csp->rlist[i]->active = 1; - } - } - - /* - * Trust file - */ -#ifdef FEATURE_TRUST - if (csp->tlist) - { - csp->tlist->active = 1; - } -#endif /* def FEATURE_TRUST */ - - last_active = csp; - csp = csp->next; - - } - else - /* - * This client is not active. Free its resources. - */ - { - last_active->next = csp->next; - - freez(csp->ip_addr_str); - freez(csp->iob->buf); - freez(csp->error_message); - - if (csp->action->flags & ACTION_FORWARD_OVERRIDE && - NULL != csp->fwd) - { - unload_forward_spec(csp->fwd); - } - free_http_request(csp->http); - - destroy_list(csp->headers); - destroy_list(csp->tags); - - free_current_action(csp->action); - -#ifdef FEATURE_STATISTICS - urls_read++; - if (csp->flags & CSP_FLAG_REJECTED) - { - urls_rejected++; - } -#endif /* def FEATURE_STATISTICS */ - - freez(csp); - - csp = last_active->next; - } - } - - nfl = files; - fl = files->next; - - while (fl != NULL) - { - if ( ( 0 == fl->active ) && ( NULL != fl->unloader ) ) - { - nfl->next = fl->next; - - (fl->unloader)(fl->f); - - freez(fl->filename); - freez(fl); - - fl = nfl->next; - } - else - { - nfl = fl; - fl = fl->next; - } - } - -} - - -/********************************************************************* - * - * Function : check_file_changed - * - * Description : Helper function to check if a file needs reloading. - * If "current" is still current, return it. Otherwise - * allocates a new (zeroed) "struct file_list", fills - * in the disk file name and timestamp, and returns it. - * - * Parameters : - * 1 : current = The file_list currently being used - will - * be checked to see if it is out of date. - * May be NULL (which is treated as out of - * date). - * 2 : filename = Name of file to check. - * 3 : newfl = New file list. [Output only] - * This will be set to NULL, OR a struct - * file_list newly allocated on the - * heap, with the filename and lastmodified - * fields filled, and all others zeroed. - * - * Returns : If file unchanged: 0 (and sets newfl == NULL) - * If file changed: 1 and sets newfl != NULL - * On error: 1 and sets newfl == NULL - * - *********************************************************************/ -int check_file_changed(const struct file_list * current, - const char * filename, - struct file_list ** newfl) -{ - struct file_list *fs; - struct stat statbuf[1]; - - *newfl = NULL; - - if (stat(filename, statbuf) < 0) - { - /* Error, probably file not found. */ - return 1; - } - - if (current - && (current->lastmodified == statbuf->st_mtime) - && (0 == strcmp(current->filename, filename))) - { - return 0; - } - - fs = (struct file_list *)zalloc(sizeof(struct file_list)); - if (fs == NULL) - { - /* Out of memory error */ - return 1; - } - - - fs->filename = strdup(filename); - fs->lastmodified = statbuf->st_mtime; - - if (fs->filename == NULL) - { - /* Out of memory error */ - freez (fs); - return 1; - } - *newfl = fs; - return 1; -} - - -/********************************************************************* - * - * Function : simple_read_line - * - * Description : Read a single line from a file and return it. - * This is basically a version of fgets() that malloc()s - * it's own line buffer. Note that the buffer will - * always be a multiple of BUFFER_SIZE bytes long. - * Therefore if you are going to keep the string for - * an extended period of time, you should probably - * strdup() it and free() the original, to save memory. - * - * - * Parameters : - * 1 : dest = destination for newly malloc'd pointer to - * line data. Will be set to NULL on error. - * 2 : fp = File to read from - * 3 : newline = Standard for newlines in the file. - * Will be unchanged if it's value on input is not - * NEWLINE_UNKNOWN. - * On output, may be changed from NEWLINE_UNKNOWN to - * actual convention in file. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_FILE on EOF. - * - *********************************************************************/ -jb_err simple_read_line(FILE *fp, char **dest, int *newline) -{ - size_t len = 0; - size_t buflen = BUFFER_SIZE; - char * buf; - char * p; - int ch; - int realnewline = NEWLINE_UNKNOWN; - - if (NULL == (buf = malloc(buflen))) - { - return JB_ERR_MEMORY; - } - - p = buf; - -/* - * Character codes. If you have a wierd compiler and the following are - * incorrect, you also need to fix NEWLINE() in loaders.h - */ -#define CHAR_CR '\r' /* ASCII 13 */ -#define CHAR_LF '\n' /* ASCII 10 */ - - for (;;) - { - ch = getc(fp); - if (ch == EOF) - { - if (len > 0) - { - *p = '\0'; - *dest = buf; - return JB_ERR_OK; - } - else - { - free(buf); - *dest = NULL; - return JB_ERR_FILE; - } - } - else if (ch == CHAR_CR) - { - ch = getc(fp); - if (ch == CHAR_LF) - { - if (*newline == NEWLINE_UNKNOWN) - { - *newline = NEWLINE_DOS; - } - } - else - { - if (ch != EOF) - { - ungetc(ch, fp); - } - if (*newline == NEWLINE_UNKNOWN) - { - *newline = NEWLINE_MAC; - } - } - *p = '\0'; - *dest = buf; - if (*newline == NEWLINE_UNKNOWN) - { - *newline = realnewline; - } - return JB_ERR_OK; - } - else if (ch == CHAR_LF) - { - *p = '\0'; - *dest = buf; - if (*newline == NEWLINE_UNKNOWN) - { - *newline = NEWLINE_UNIX; - } - return JB_ERR_OK; - } - else if (ch == 0) - { - *p = '\0'; - *dest = buf; - return JB_ERR_OK; - } - - *p++ = (char)ch; - - if (++len >= buflen) - { - buflen += BUFFER_SIZE; - if (NULL == (p = realloc(buf, buflen))) - { - free(buf); - return JB_ERR_MEMORY; - } - buf = p; - p = buf + len; - } - } -} - - -/********************************************************************* - * - * Function : edit_read_line - * - * Description : Read a single non-empty line from a file and return - * it. Trims comments, leading and trailing whitespace - * and respects escaping of newline and comment char. - * Provides the line in 2 alternative forms: raw and - * preprocessed. - * - raw is the raw data read from the file. If the - * line is not modified, then this should be written - * to the new file. - * - prefix is any comments and blank lines that were - * read from the file. If the line is modified, then - * this should be written out to the file followed - * by the modified data. (If this string is non-empty - * then it will have a newline at the end). - * - data is the actual data that will be parsed - * further by appropriate routines. - * On EOF, the 3 strings will all be set to NULL and - * 0 will be returned. - * - * Parameters : - * 1 : fp = File to read from - * 2 : raw_out = destination for newly malloc'd pointer to - * raw line data. May be NULL if you don't want it. - * 3 : prefix_out = destination for newly malloc'd pointer to - * comments. May be NULL if you don't want it. - * 4 : data_out = destination for newly malloc'd pointer to - * line data with comments and leading/trailing spaces - * removed, and line continuation performed. May be - * NULL if you don't want it. - * 5 : newline = Standard for newlines in the file. - * On input, set to value to use or NEWLINE_UNKNOWN. - * On output, may be changed from NEWLINE_UNKNOWN to - * actual convention in file. May be NULL if you - * don't want it. - * 6 : line_number = Line number in file. In "lines" as - * reported by a text editor, not lines containing data. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out-of-memory - * JB_ERR_FILE on EOF. - * - *********************************************************************/ -jb_err edit_read_line(FILE *fp, - char **raw_out, - char **prefix_out, - char **data_out, - int *newline, - unsigned long *line_number) -{ - char *p; /* Temporary pointer */ - char *linebuf; /* Line read from file */ - char *linestart; /* Start of linebuf, usually first non-whitespace char */ - int contflag = 0; /* Nonzero for line continuation - i.e. line ends '\' */ - int is_empty = 1; /* Flag if not got any data yet */ - char *raw = NULL; /* String to be stored in raw_out */ - char *prefix = NULL; /* String to be stored in prefix_out */ - char *data = NULL; /* String to be stored in data_out */ - int scrapnewline; /* Used for (*newline) if newline==NULL */ - jb_err rval = JB_ERR_OK; - - assert(fp); - assert(raw_out || data_out); - assert(newline == NULL - || *newline == NEWLINE_UNKNOWN - || *newline == NEWLINE_UNIX - || *newline == NEWLINE_DOS - || *newline == NEWLINE_MAC); - - if (newline == NULL) - { - scrapnewline = NEWLINE_UNKNOWN; - newline = &scrapnewline; - } - - /* Set output parameters to NULL */ - if (raw_out) - { - *raw_out = NULL; - } - if (prefix_out) - { - *prefix_out = NULL; - } - if (data_out) - { - *data_out = NULL; - } - - /* Set string variables to new, empty strings. */ - - if (raw_out) - { - raw = strdup(""); - if (NULL == raw) - { - return JB_ERR_MEMORY; - } - } - if (prefix_out) - { - prefix = strdup(""); - if (NULL == prefix) - { - freez(raw); - return JB_ERR_MEMORY; - } - } - if (data_out) - { - data = strdup(""); - if (NULL == data) - { - freez(raw); - freez(prefix); - return JB_ERR_MEMORY; - } - } - - /* Main loop. Loop while we need more data & it's not EOF. */ - - while ( (contflag || is_empty) - && (JB_ERR_OK == (rval = simple_read_line(fp, &linebuf, newline)))) - { - if (line_number) - { - (*line_number)++; - } - if (raw) - { - string_append(&raw,linebuf); - if (string_append(&raw,NEWLINE(*newline))) - { - freez(prefix); - freez(data); - free(linebuf); - return JB_ERR_MEMORY; - } - } - - /* Line continuation? Trim escape and set flag. */ - p = linebuf + strlen(linebuf) - 1; - contflag = ((*linebuf != '\0') && (*p == '\\')); - if (contflag) - { - *p = '\0'; - } - - /* Trim leading spaces if we're at the start of the line */ - linestart = linebuf; - assert(NULL != data); - if (*data == '\0') - { - /* Trim leading spaces */ - while (*linestart && isspace((int)(unsigned char)*linestart)) - { - linestart++; - } - } - - /* Handle comment characters. */ - p = linestart; - while ((p = strchr(p, '#')) != NULL) - { - /* Found a comment char.. */ - if ((p != linebuf) && (*(p-1) == '\\')) - { - /* ..and it's escaped, left-shift the line over the escape. */ - char *q = p - 1; - while ((*q = *(q + 1)) != '\0') - { - q++; - } - /* Now scan from just after the "#". */ - } - else - { - /* Real comment. Save it... */ - if (p == linestart) - { - /* Special case: Line only contains a comment, so all the - * previous whitespace is considered part of the comment. - * Undo the whitespace skipping, if any. - */ - linestart = linebuf; - p = linestart; - } - if (prefix) - { - string_append(&prefix,p); - if (string_append(&prefix, NEWLINE(*newline))) - { - freez(raw); - freez(data); - free(linebuf); - return JB_ERR_MEMORY; - } - } - - /* ... and chop off the rest of the line */ - *p = '\0'; - } - } /* END while (there's a # character) */ - - /* Write to the buffer */ - if (*linestart) - { - is_empty = 0; - if (data) - { - if (string_append(&data, linestart)) - { - freez(raw); - freez(prefix); - free(linebuf); - return JB_ERR_MEMORY; - } - } - } - - free(linebuf); - } /* END while(we need more data) */ - - /* Handle simple_read_line() errors - ignore EOF */ - if ((rval != JB_ERR_OK) && (rval != JB_ERR_FILE)) - { - freez(raw); - freez(prefix); - freez(data); - return rval; - } - - if (raw ? (*raw == '\0') : is_empty) - { - /* EOF and no data there. (Definition of "data" depends on whether - * the caller cares about "raw" or just "data"). - */ - - freez(raw); - freez(prefix); - freez(data); - - return JB_ERR_FILE; - } - else - { - /* Got at least some data */ - - /* Remove trailing whitespace */ - chomp(data); - - if (raw_out) - { - *raw_out = raw; - } - else - { - freez(raw); - } - if (prefix_out) - { - *prefix_out = prefix; - } - else - { - freez(prefix); - } - if (data_out) - { - *data_out = data; - } - else - { - freez(data); - } - return JB_ERR_OK; - } -} - - -/********************************************************************* - * - * Function : read_config_line - * - * Description : Read a single non-empty line from a file and return - * it. Trims comments, leading and trailing whitespace - * and respects escaping of newline and comment char. - * - * Parameters : - * 1 : buf = Buffer to use. - * 2 : buflen = Size of buffer in bytes. - * 3 : fp = File to read from - * 4 : linenum = linenumber in file - * - * Returns : NULL on EOF or error - * Otherwise, returns buf. - * - *********************************************************************/ -char *read_config_line(char *buf, size_t buflen, FILE *fp, unsigned long *linenum) -{ - jb_err err; - char *buf2 = NULL; - err = edit_read_line(fp, NULL, NULL, &buf2, NULL, linenum); - if (err) - { - if (err == JB_ERR_MEMORY) - { - log_error(LOG_LEVEL_FATAL, "Out of memory loading a config file"); - } - return NULL; - } - else - { - assert(buf2); - assert(strlen(buf2) + 1U < buflen); - strncpy(buf, buf2, buflen - 1); - free(buf2); - buf[buflen - 1] = '\0'; - return buf; - } -} - - -#ifdef FEATURE_TRUST -/********************************************************************* - * - * Function : unload_trustfile - * - * Description : Unloads a trustfile. - * - * Parameters : - * 1 : f = the data structure associated with the trustfile. - * - * Returns : N/A - * - *********************************************************************/ -static void unload_trustfile(void *f) -{ - struct block_spec *cur = (struct block_spec *)f; - struct block_spec *next; - - while (cur != NULL) - { - next = cur->next; - - free_url_spec(cur->url); - free(cur); - - cur = next; - } - -} - - -#ifdef FEATURE_GRACEFUL_TERMINATION -/********************************************************************* - * - * Function : unload_current_trust_file - * - * Description : Unloads current trust file - reset to state at - * beginning of program. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void unload_current_trust_file(void) -{ - if (current_trustfile) - { - current_trustfile->unloader = unload_trustfile; - current_trustfile = NULL; - } -} -#endif /* FEATURE_GRACEFUL_TERMINATION */ - - -/********************************************************************* - * - * Function : load_trustfile - * - * Description : Read and parse a trustfile and add to files list. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int load_trustfile(struct client_state *csp) -{ - FILE *fp; - - struct block_spec *b, *bl; - struct url_spec **tl; - - char buf[BUFFER_SIZE], *p, *q; - int reject, trusted; - struct file_list *fs; - unsigned long linenum = 0; - int trusted_referrers = 0; - - if (!check_file_changed(current_trustfile, csp->config->trustfile, &fs)) - { - /* No need to load */ - if (csp) - { - csp->tlist = current_trustfile; - } - return(0); - } - if (!fs) - { - goto load_trustfile_error; - } - - fs->f = bl = (struct block_spec *)zalloc(sizeof(*bl)); - if (bl == NULL) - { - goto load_trustfile_error; - } - - if ((fp = fopen(csp->config->trustfile, "r")) == NULL) - { - goto load_trustfile_error; - } - - tl = csp->config->trust_list; - - while (read_config_line(buf, sizeof(buf), fp, &linenum) != NULL) - { - trusted = 0; - reject = 1; - - if (*buf == '+') - { - trusted = 1; - *buf = '~'; - } - - if (*buf == '~') - { - reject = 0; - p = buf; - q = p+1; - while ((*p++ = *q++) != '\0') - { - /* nop */ - } - } - - /* skip blank lines */ - if (*buf == '\0') - { - continue; - } - - /* allocate a new node */ - if ((b = zalloc(sizeof(*b))) == NULL) - { - fclose(fp); - goto load_trustfile_error; - } - - /* add it to the list */ - b->next = bl->next; - bl->next = b; - - b->reject = reject; - - /* Save the URL pattern */ - if (create_url_spec(b->url, buf)) - { - fclose(fp); - goto load_trustfile_error; - } - - /* - * save a pointer to URL's spec in the list of trusted URL's, too - */ - if (trusted) - { - if(++trusted_referrers < MAX_TRUSTED_REFERRERS) - { - *tl++ = b->url; - } - } - } - - if(trusted_referrers >= MAX_TRUSTED_REFERRERS) - { - /* - * FIXME: ... after Privoxy 3.0.4 is out. - */ - log_error(LOG_LEVEL_ERROR, "Too many trusted referrers. Current limit is %d, you are using %d.\n" - " Additional trusted referrers are treated like ordinary trusted URLs.\n" - " (You can increase this limit by changing MAX_TRUSTED_REFERRERS in project.h and recompiling).", - MAX_TRUSTED_REFERRERS, trusted_referrers); - } - - *tl = NULL; - - fclose(fp); - - /* the old one is now obsolete */ - if (current_trustfile) - { - current_trustfile->unloader = unload_trustfile; - } - - fs->next = files->next; - files->next = fs; - current_trustfile = fs; - - if (csp) - { - csp->tlist = fs; - } - - return(0); - -load_trustfile_error: - log_error(LOG_LEVEL_FATAL, "can't load trustfile '%s': %E", - csp->config->trustfile); - return(-1); - -} -#endif /* def FEATURE_TRUST */ - - -/********************************************************************* - * - * Function : unload_re_filterfile - * - * Description : Unload the re_filter list by freeing all chained - * re_filterfile specs and their data. - * - * Parameters : - * 1 : f = the data structure associated with the filterfile. - * - * Returns : N/A - * - *********************************************************************/ -static void unload_re_filterfile(void *f) -{ - struct re_filterfile_spec *a, *b = (struct re_filterfile_spec *)f; - - while (b != NULL) - { - a = b->next; - - destroy_list(b->patterns); - pcrs_free_joblist(b->joblist); - freez(b->name); - freez(b->description); - freez(b); - - b = a; - } - - return; -} - -/********************************************************************* - * - * Function : unload_forward_spec - * - * Description : Unload the forward spec settings by freeing all - * memory referenced by members and the memory for - * the spec itself. - * - * Parameters : - * 1 : fwd = the forward spec. - * - * Returns : N/A - * - *********************************************************************/ -void unload_forward_spec(struct forward_spec *fwd) -{ - free_url_spec(fwd->url); - freez(fwd->gateway_host); - freez(fwd->forward_host); - free(fwd); - - return; -} - - -#ifdef FEATURE_GRACEFUL_TERMINATION -/********************************************************************* - * - * Function : unload_current_re_filterfile - * - * Description : Unloads current re_filter file - reset to state at - * beginning of program. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void unload_current_re_filterfile(void) -{ - int i; - - for (i = 0; i < MAX_AF_FILES; i++) - { - if (current_re_filterfile[i]) - { - current_re_filterfile[i]->unloader = unload_re_filterfile; - current_re_filterfile[i] = NULL; - } - } -} -#endif - - -/********************************************************************* - * - * Function : load_re_filterfiles - * - * Description : Loads all the filterfiles. - * Generate a chained list of re_filterfile_spec's from - * the "FILTER: " blocks, compiling all their substitutions - * into chained lists of pcrs_job structs. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int load_re_filterfiles(struct client_state *csp) -{ - int i; - int result; - - for (i = 0; i < MAX_AF_FILES; i++) - { - if (csp->config->re_filterfile[i]) - { - result = load_one_re_filterfile(csp, i); - if (result) - { - return result; - } - } - else if (current_re_filterfile[i]) - { - current_re_filterfile[i]->unloader = unload_re_filterfile; - current_re_filterfile[i] = NULL; - } - } - - return 0; -} - - -/********************************************************************* - * - * Function : load_one_re_filterfile - * - * Description : Load a re_filterfile. - * Generate a chained list of re_filterfile_spec's from - * the "FILTER: " blocks, compiling all their substitutions - * into chained lists of pcrs_job structs. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int load_one_re_filterfile(struct client_state *csp, int fileid) -{ - FILE *fp; - - struct re_filterfile_spec *new_bl, *bl = NULL; - struct file_list *fs; - - char buf[BUFFER_SIZE]; - int error; - unsigned long linenum = 0; - pcrs_job *dummy, *lastjob = NULL; - - /* - * No need to reload if unchanged - */ - if (!check_file_changed(current_re_filterfile[fileid], csp->config->re_filterfile[fileid], &fs)) - { - if (csp) - { - csp->rlist[fileid] = current_re_filterfile[fileid]; - } - return(0); - } - if (!fs) - { - goto load_re_filterfile_error; - } - - /* - * Open the file or fail - */ - if ((fp = fopen(csp->config->re_filterfile[fileid], "r")) == NULL) - { - goto load_re_filterfile_error; - } - - /* - * Read line by line - */ - while (read_config_line(buf, sizeof(buf), fp, &linenum) != NULL) - { - int new_filter = NO_NEW_FILTER; - - if (strncmp(buf, "FILTER:", 7) == 0) - { - new_filter = FT_CONTENT_FILTER; - } - else if (strncmp(buf, "SERVER-HEADER-FILTER:", 21) == 0) - { - new_filter = FT_SERVER_HEADER_FILTER; - } - else if (strncmp(buf, "CLIENT-HEADER-FILTER:", 21) == 0) - { - new_filter = FT_CLIENT_HEADER_FILTER; - } - else if (strncmp(buf, "CLIENT-HEADER-TAGGER:", 21) == 0) - { - new_filter = FT_CLIENT_HEADER_TAGGER; - } - else if (strncmp(buf, "SERVER-HEADER-TAGGER:", 21) == 0) - { - new_filter = FT_SERVER_HEADER_TAGGER; - } - - /* - * If this is the head of a new filter block, make it a - * re_filterfile spec of its own and chain it to the list: - */ - if (new_filter != NO_NEW_FILTER) - { - new_bl = (struct re_filterfile_spec *)zalloc(sizeof(*bl)); - if (new_bl == NULL) - { - goto load_re_filterfile_error; - } - if (new_filter == FT_CONTENT_FILTER) - { - new_bl->name = chomp(buf + 7); - } - else - { - new_bl->name = chomp(buf + 21); - } - new_bl->type = new_filter; - - /* - * If a filter description is available, - * encode it to HTML and save it. - */ - if (NULL != (new_bl->description = strpbrk(new_bl->name, " \t"))) - { - *new_bl->description++ = '\0'; - new_bl->description = html_encode(chomp(new_bl->description)); - if (NULL == new_bl->description) - { - new_bl->description = strdup("Out of memory while encoding this filter's description to HTML"); - } - } - else - { - new_bl->description = strdup("No description available for this filter"); - } - - new_bl->name = strdup(chomp(new_bl->name)); - - /* - * If this is the first filter block, chain it - * to the file_list rather than its (nonexistant) - * predecessor - */ - if (fs->f == NULL) - { - fs->f = new_bl; - } - else - { - assert(NULL != bl); - bl->next = new_bl; - } - bl = new_bl; - - log_error(LOG_LEVEL_RE_FILTER, "Reading in filter \"%s\" (\"%s\")", bl->name, bl->description); - - continue; - } - - /* - * Else, save the expression, make it a pcrs_job - * and chain it into the current filter's joblist - */ - if (bl != NULL) - { - error = enlist(bl->patterns, buf); - if (JB_ERR_MEMORY == error) - { - log_error(LOG_LEVEL_FATAL, - "Out of memory while enlisting re_filter job \'%s\' for filter %s.", buf, bl->name); - } - assert(JB_ERR_OK == error); - - if (pcrs_job_is_dynamic(buf)) - { - /* - * Dynamic pattern that might contain variables - * and has to be recompiled for every request - */ - if (bl->joblist != NULL) - { - pcrs_free_joblist(bl->joblist); - bl->joblist = NULL; - } - bl->dynamic = 1; - log_error(LOG_LEVEL_RE_FILTER, - "Adding dynamic re_filter job \'%s\' to filter %s succeeded.", buf, bl->name); - continue; - } - else if (bl->dynamic) - { - /* - * A previous job was dynamic and as we - * recompile the whole filter anyway, it - * makes no sense to compile this job now. - */ - log_error(LOG_LEVEL_RE_FILTER, - "Adding static re_filter job \'%s\' to dynamic filter %s succeeded.", buf, bl->name); - continue; - } - - if ((dummy = pcrs_compile_command(buf, &error)) == NULL) - { - log_error(LOG_LEVEL_ERROR, - "Adding re_filter job \'%s\' to filter %s failed with error %d.", buf, bl->name, error); - continue; - } - else - { - if (bl->joblist == NULL) - { - bl->joblist = dummy; - } - else if (NULL != lastjob) - { - lastjob->next = dummy; - } - lastjob = dummy; - log_error(LOG_LEVEL_RE_FILTER, "Adding re_filter job \'%s\' to filter %s succeeded.", buf, bl->name); - } - } - else - { - log_error(LOG_LEVEL_ERROR, "Ignoring job %s outside filter block in %s, line %d", - buf, csp->config->re_filterfile[fileid], linenum); - } - } - - fclose(fp); - - /* - * Schedule the now-obsolete old data for unloading - */ - if ( NULL != current_re_filterfile[fileid] ) - { - current_re_filterfile[fileid]->unloader = unload_re_filterfile; - } - - /* - * Chain this file into the global list of loaded files - */ - fs->next = files->next; - files->next = fs; - current_re_filterfile[fileid] = fs; - - if (csp) - { - csp->rlist[fileid] = fs; - } - - return( 0 ); - -load_re_filterfile_error: - log_error(LOG_LEVEL_FATAL, "can't load re_filterfile '%s': %E", - csp->config->re_filterfile[fileid]); - return(-1); - -} - - -/********************************************************************* - * - * Function : add_loader - * - * Description : Called from `load_config'. Called once for each input - * file found in config. - * - * Parameters : - * 1 : loader = pointer to a function that can parse and load - * the appropriate config file. - * 2 : config = The configuration_spec to add the loader to. - * - * Returns : N/A - * - *********************************************************************/ -void add_loader(int (*loader)(struct client_state *), - struct configuration_spec * config) -{ - int i; - - for (i=0; i < NLOADERS; i++) - { - if (config->loaders[i] == NULL) - { - config->loaders[i] = loader; - break; - } - } - -} - - -/********************************************************************* - * - * Function : run_loader - * - * Description : Called from `load_config' and `listen_loop'. This - * function keeps the "csp" current with any file mods - * since the last loop. If a file is unchanged, the - * loader functions do NOT reload the file. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * Must be non-null. Reads: "csp->config" - * Writes: various data members. - * - * Returns : 0 => Ok, everything else is an error. - * - *********************************************************************/ -int run_loader(struct client_state *csp) -{ - int ret = 0; - int i; - - for (i=0; i < NLOADERS; i++) - { - if (csp->config->loaders[i] == NULL) - { - break; - } - ret |= (csp->config->loaders[i])(csp); - } - return(ret); - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/loaders.h b/external/privoxy/loaders.h deleted file mode 100644 index ded18e3..0000000 --- a/external/privoxy/loaders.h +++ /dev/null @@ -1,250 +0,0 @@ -#ifndef LOADERS_H_INCLUDED -#define LOADERS_H_INCLUDED -#define LOADERS_H_VERSION "$Id: loaders.h,v 1.23 2008/03/30 14:52:10 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/loaders.h,v $ - * - * Purpose : Functions to load and unload the various - * configuration files. Also contains code to manage - * the list of active loaders, and to automatically - * unload files that are no longer in use. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: loaders.h,v $ - * Revision 1.23 2008/03/30 14:52:10 fabiankeil - * Rename load_actions_file() and load_re_filterfile() - * as they load multiple files "now". - * - * Revision 1.22 2007/06/01 14:12:38 fabiankeil - * Add unload_forward_spec() in preparation for forward-override{}. - * - * Revision 1.21 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.19 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.18 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.17 2002/03/16 23:54:06 jongfoster - * Adding graceful termination feature, to help look for memory leaks. - * If you enable this (which, by design, has to be done by hand - * editing config.h) and then go to http://i.j.b/die, then the program - * will exit cleanly after the *next* request. It should free all the - * memory that was used. - * - * Revision 1.16 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.15 2002/01/22 23:46:18 jongfoster - * Moving edit_read_line() and simple_read_line() to loaders.c, and - * extending them to support reading MS-DOS, Mac and UNIX style files - * on all platforms. - * - * Modifying read_config_line() (without changing it's prototype) to - * be a trivial wrapper for edit_read_line(). This means that we have - * one function to read a line and handle comments, which is common - * between the initialization code and the edit interface. - * - * Revision 1.14 2002/01/17 21:03:08 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Renaming free_url to free_url_spec, since it frees a struct url_spec. - * - * Revision 1.13 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.12 2001/11/07 00:02:13 steudten - * Add line number in error output for lineparsing for - * actionsfile and configfile. - * Special handling for CLF added. - * - * Revision 1.11 2001/10/23 21:38:53 jongfoster - * Adding error-checking to create_url_spec() - * - * Revision 1.10 2001/09/22 16:36:59 jongfoster - * Removing unused parameter fs from read_config_line() - * - * Revision 1.9 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.8 2001/07/29 18:58:15 jongfoster - * Removing nested #includes, adding forward declarations for needed - * structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED. - * - * Revision 1.7 2001/07/13 14:01:54 oes - * Removed all #ifdef PCRS - * - * Revision 1.6 2001/06/07 23:14:38 jongfoster - * Removing ACL and forward file loaders - these files have - * been merged into the config file. - * - * Revision 1.5 2001/05/31 21:28:49 jongfoster - * Removed all permissionsfile code - it's now called the actions - * file, and (almost) all the code is in actions.c - * - * Revision 1.4 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.3 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.2 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.1.1.1 2001/05/15 13:59:00 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -/* Structures taken from project.h */ -struct client_state; -struct file_list; -struct configuration_spec; -struct url_spec; - -extern void sweep(void); -extern char *read_config_line(char *buf, size_t buflen, FILE *fp, unsigned long *linenum); -extern int check_file_changed(const struct file_list * current, - const char * filename, - struct file_list ** newfl); - -extern jb_err edit_read_line(FILE *fp, - char **raw_out, - char **prefix_out, - char **data_out, - int *newline, - unsigned long *line_number); - -extern jb_err simple_read_line(FILE *fp, char **dest, int *newline); - -/* - * Various types of newlines that a file may contain. - */ -#define NEWLINE_UNKNOWN 0 /* Newline convention in file is unknown */ -#define NEWLINE_UNIX 1 /* Newline convention in file is '\n' (ASCII 10) */ -#define NEWLINE_DOS 2 /* Newline convention in file is '\r\n' (ASCII 13,10) */ -#define NEWLINE_MAC 3 /* Newline convention in file is '\r' (ASCII 13) */ - -/* - * Types of newlines that a file may contain, as strings. If you have an - * extremely wierd compiler that does not have '\r' == CR == ASCII 13 and - * '\n' == LF == ASCII 10), then fix CHAR_CR and CHAR_LF in loaders.c as - * well as these definitions. - */ -#define NEWLINE(style) ((style)==NEWLINE_DOS ? "\r\n" : \ - ((style)==NEWLINE_MAC ? "\r" : "\n")) - - -extern short int MustReload; -extern int load_action_files(struct client_state *csp); -extern int load_re_filterfiles(struct client_state *csp); - -#ifdef FEATURE_TRUST -extern int load_trustfile(struct client_state *csp); -#endif /* def FEATURE_TRUST */ - -#ifdef FEATURE_GRACEFUL_TERMINATION -#ifdef FEATURE_TRUST -void unload_current_trust_file(void); -#endif -void unload_current_re_filterfile(void); -#endif /* FEATURE_GRACEFUL_TERMINATION */ - -void unload_forward_spec(struct forward_spec *fwd); - -extern void add_loader(int (*loader)(struct client_state *), - struct configuration_spec * config); -extern int run_loader(struct client_state *csp); - -/* Revision control strings from this header and associated .c file */ -extern const char loaders_rcs[]; -extern const char loaders_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef LOADERS_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/match-all.action b/external/privoxy/match-all.action deleted file mode 100644 index 904d85b..0000000 --- a/external/privoxy/match-all.action +++ /dev/null @@ -1,14 +0,0 @@ -############################################################################# -# $Id: match-all.action,v 1.2 2009/02/14 10:41:07 fabiankeil Exp $ -# -# This file contains the actions that are applied to all requests and -# may be overruled later on by other actions files. Less experienced -# users should only edit this file through the actions file editor. -# -############################################################################# -{ \ -+change-x-forwarded-for{block} \ -+hide-from-header{block} \ -+set-image-blocker{pattern} \ -} -/ # Match all URLs diff --git a/external/privoxy/miscutil.c b/external/privoxy/miscutil.c deleted file mode 100644 index 74aa32e..0000000 --- a/external/privoxy/miscutil.c +++ /dev/null @@ -1,1907 +0,0 @@ -const char miscutil_rcs[] = "$Id: miscutil.c,v 1.62 2008/12/04 18:16:41 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/miscutil.c,v $ - * - * Purpose : zalloc, hash_string, safe_strerror, strcmpic, - * strncmpic, chomp, and MinGW32 strdup - * functions. - * These are each too small to deserve their own file - * but don't really fit in any other file. - * - * Copyright : Written by and Copyright (C) 2001-2007 - * the SourceForge Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * The timegm replacement function was taken from GnuPG, - * Copyright (C) 2004 Free Software Foundation, Inc. - * - * The snprintf replacement function is written by - * Mark Martinec who also holds the copyright. It can be - * used under the terms of the GPL or the terms of the - * "Frontier Artistic License". - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: miscutil.c,v $ - * Revision 1.62 2008/12/04 18:16:41 fabiankeil - * Fix some cparser warnings. - * - * Revision 1.61 2008/10/18 11:09:23 fabiankeil - * Improve seed used by pick_from_range() on mingw32. - * - * Revision 1.60 2008/09/07 12:35:05 fabiankeil - * Add mutex lock support for _WIN32. - * - * Revision 1.59 2008/09/04 08:13:58 fabiankeil - * Prepare for critical sections on Windows by adding a - * layer of indirection before the pthread mutex functions. - * - * Revision 1.58 2008/04/17 14:53:30 fabiankeil - * Move simplematch() into urlmatch.c as it's only - * used to match (old-school) domain patterns. - * - * Revision 1.57 2008/03/24 15:29:51 fabiankeil - * Pet gcc43. - * - * Revision 1.56 2007/12/01 12:59:05 fabiankeil - * Some sanity checks for pick_from_range(). - * - * Revision 1.55 2007/11/03 17:34:49 fabiankeil - * Log the "weak randomization factor" warning only - * once for mingw32 and provide some more details. - * - * Revision 1.54 2007/09/19 20:28:37 fabiankeil - * If privoxy_strlcpy() is called with a "buffer" size - * of 0, don't touch whatever destination points to. - * - * Revision 1.53 2007/09/09 18:20:20 fabiankeil - * Turn privoxy_strlcpy() into a function and try to work with - * b0rked snprintf() implementations too. Reported by icmp30. - * - * Revision 1.52 2007/08/19 12:32:34 fabiankeil - * Fix a conversion warning. - * - * Revision 1.51 2007/06/17 16:12:22 fabiankeil - * #ifdef _WIN32 the last commit. According to David Shaw, - * one of the gnupg developers, the changes are mingw32-specific. - * - * Revision 1.50 2007/06/10 14:59:59 fabiankeil - * Change replacement timegm() to better match our style, plug a small - * but guaranteed memory leak and fix "time zone breathing" on mingw32. - * - * Revision 1.49 2007/05/11 11:48:15 fabiankeil - * - Delete strsav() which was replaced - * by string_append() years ago. - * - Add a strlcat() look-alike. - * - Use strlcat() and strlcpy() in those parts - * of the code that are run on unixes. - * - * Revision 1.48 2007/04/09 17:48:51 fabiankeil - * Check for HAVE_SNPRINTF instead of __OS2__ - * before including the portable snprintf() code. - * - * Revision 1.47 2007/03/17 11:52:15 fabiankeil - * - Use snprintf instead of sprintf. - * - Mention copyright for the replacement - * functions in the copyright header. - * - * Revision 1.46 2007/01/18 15:03:20 fabiankeil - * Don't include replacement timegm() if - * putenv() or tzset() isn't available. - * - * Revision 1.45 2006/12/26 17:31:41 fabiankeil - * Mutex protect rand() if POSIX threading - * is used, warn the user if that's not possible - * and stop using it on _WIN32 where it could - * cause crashes. - * - * Revision 1.44 2006/11/07 12:46:43 fabiankeil - * Silence compiler warning on NetBSD 3.1. - * - * Revision 1.43 2006/09/23 13:26:38 roro - * Replace TABs by spaces in source code. - * - * Revision 1.42 2006/09/09 14:01:45 fabiankeil - * Integrated Oliver Yeoh's domain pattern fix - * to make sure *x matches xx. Closes Patch 1217393 - * and Bug 1170767. - * - * Revision 1.41 2006/08/18 16:03:17 david__schmidt - * Tweak for OS/2 build happiness. - * - * Revision 1.40 2006/08/17 17:15:10 fabiankeil - * - Back to timegm() using GnuPG's replacement if necessary. - * Using mktime() and localtime() could add a on hour offset if - * the randomize factor was big enough to lead to a summer/wintertime - * switch. - * - * - Removed now-useless Privoxy 3.0.3 compatibility glue. - * - * - Moved randomization code into pick_from_range(). - * - * - Changed parse_header_time definition. - * time_t isn't guaranteed to be signed and - * if it isn't, -1 isn't available as error code. - * Changed some variable types in client_if_modified_since() - * because of the same reason. - * - * Revision 1.39 2006/07/18 14:48:46 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.37.2.4 2003/12/01 14:45:14 oes - * Fixed two more problems with wildcarding in simplematch() - * - * Revision 1.37.2.3 2003/11/20 11:39:24 oes - * Bugfix: The "?" wildcard for domain names had never been implemented. Ooops\! - * - * Revision 1.37.2.2 2002/11/12 14:28:18 oes - * Proper backtracking in simplematch; fixes bug #632888 - * - * Revision 1.37.2.1 2002/09/25 12:58:51 oes - * Made strcmpic and strncmpic safe against NULL arguments - * (which are now treated as empty strings). - * - * Revision 1.37 2002/04/26 18:29:43 jongfoster - * Fixing this Visual C++ warning: - * miscutil.c(710) : warning C4090: '=' : different 'const' qualifiers - * - * Revision 1.36 2002/04/26 12:55:38 oes - * New function string_toupper - * - * Revision 1.35 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.34 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.33 2002/03/07 03:46:53 oes - * Fixed compiler warnings etc - * - * Revision 1.32 2002/03/06 23:02:57 jongfoster - * Removing tabs - * - * Revision 1.31 2002/03/05 04:52:42 oes - * Deleted non-errlog debugging code - * - * Revision 1.30 2002/03/04 18:27:42 oes - * - Deleted deletePidFile - * - Made write_pid_file use the --pidfile option value - * (or no PID file, if the option was absent) - * - Played styleguide police - * - * Revision 1.29 2002/03/04 02:08:02 david__schmidt - * Enable web editing of actions file on OS/2 (it had been broken all this time!) - * - * Revision 1.28 2002/03/03 09:18:03 joergs - * Made jumbjuster work on AmigaOS again. - * - * Revision 1.27 2002/01/21 00:52:32 jongfoster - * Adding string_join() - * - * Revision 1.26 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.25 2001/11/13 00:16:38 jongfoster - * Replacing references to malloc.h with the standard stdlib.h - * (See ANSI or K&R 2nd Ed) - * - * Revision 1.24 2001/11/05 21:41:43 steudten - * Add changes to be a real daemon just for unix os. - * (change cwd to /, detach from controlling tty, set - * process group and session leader to the own process. - * Add DBG() Macro. - * Add some fatal-error log message for failed malloc(). - * Add '-d' if compiled with 'configure --with-debug' to - * enable debug output. - * - * Revision 1.23 2001/10/29 03:48:10 david__schmidt - * OS/2 native needed a snprintf() routine. Added one to miscutil, brackedted - * by and __OS2__ ifdef. - * - * Revision 1.22 2001/10/26 17:39:38 oes - * Moved ijb_isspace and ijb_tolower to project.h - * - * Revision 1.21 2001/10/23 21:27:50 jongfoster - * Standardising error codes in string_append - * make_path() no longer adds '\\' if the dir already ends in '\\' (this - * is just copying a UNIX-specific fix to the Windows-specific part) - * - * Revision 1.20 2001/10/22 15:33:56 david__schmidt - * Special-cased OS/2 out of the Netscape-abort-on-404-in-js problem in - * filters.c. Added a FIXME in front of the offending code. I'll gladly - * put in a better/more robust fix for all parties if one is presented... - * It seems that just returning 200 instead of 404 would pretty much fix - * it for everyone, but I don't know all the history of the problem. - * - * Revision 1.19 2001/10/14 22:02:57 jongfoster - * New function string_append() which is like strsav(), but running - * out of memory isn't automatically FATAL. - * - * Revision 1.18 2001/09/20 13:33:43 steudten - * - * change long to int as return value in hash_string(). Remember the wraparound - * for int = long = sizeof(4) - thats maybe not what we want. - * - * Revision 1.17 2001/09/13 20:51:29 jongfoster - * Fixing potential problems with characters >=128 in simplematch() - * This was also a compiler warning. - * - * Revision 1.16 2001/09/10 10:56:59 oes - * Silenced compiler warnings - * - * Revision 1.15 2001/07/13 14:02:24 oes - * Removed vim-settings - * - * Revision 1.14 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.13 2001/06/29 13:32:14 oes - * Removed logentry from cancelled commit - * - * Revision 1.12 2001/06/09 10:55:28 jongfoster - * Changing BUFSIZ ==> BUFFER_SIZE - * - * Revision 1.11 2001/06/07 23:09:19 jongfoster - * Cosmetic indentation changes. - * - * Revision 1.10 2001/06/07 14:51:38 joergs - * make_path() no longer adds '/' if the dir already ends in '/'. - * - * Revision 1.9 2001/06/07 14:43:17 swa - * slight mistake in make_path, unix path style is /. - * - * Revision 1.8 2001/06/05 22:32:01 jongfoster - * New function make_path() to splice directory and file names together. - * - * Revision 1.7 2001/06/03 19:12:30 oes - * introduced bindup() - * - * Revision 1.6 2001/06/01 18:14:49 jongfoster - * Changing the calls to strerr() to check HAVE_STRERR (which is defined - * in config.h if appropriate) rather than the NO_STRERR macro. - * - * Revision 1.5 2001/06/01 10:31:51 oes - * Added character class matching to trivimatch; renamed to simplematch - * - * Revision 1.4 2001/05/31 17:32:31 oes - * - * - Enhanced domain part globbing with infix and prefix asterisk - * matching and optional unanchored operation - * - * Revision 1.3 2001/05/29 23:10:09 oes - * - * - * - Introduced chomp() - * - Moved strsav() from showargs to miscutil - * - * Revision 1.2 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.1.1.1 2001/05/15 13:59:00 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> -#include <sys/types.h> -#include <stdlib.h> -#if !defined(_WIN32) && !defined(__OS2__) -#include <unistd.h> -#endif /* #if !defined(_WIN32) && !defined(__OS2__) */ -#include <string.h> -#include <ctype.h> -#include <assert.h> - -#if !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) -#include <time.h> -#endif /* !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) */ - -#include "project.h" -#include "miscutil.h" -#include "errlog.h" -#include "jcc.h" - -const char miscutil_h_rcs[] = MISCUTIL_H_VERSION; - -/********************************************************************* - * - * Function : zalloc - * - * Description : Malloc some memory and set it to '\0'. - * The way calloc() ought to be -acjc - * - * Parameters : - * 1 : size = Size of memory chunk to return. - * - * Returns : Pointer to newly malloc'd memory chunk. - * - *********************************************************************/ -void *zalloc(size_t size) -{ - void * ret; - - if ((ret = (void *)malloc(size)) != NULL) - { - memset(ret, 0, size); - } - - return(ret); - -} - - -#if defined(unix) -/********************************************************************* - * - * Function : write_pid_file - * - * Description : Writes a pid file with the pid of the main process - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void write_pid_file(void) -{ - FILE *fp; - - /* - * If no --pidfile option was given, - * we can live without one. - */ - if (pidfile == NULL) return; - - if ((fp = fopen(pidfile, "w")) == NULL) - { - log_error(LOG_LEVEL_INFO, "can't open pidfile '%s': %E", pidfile); - } - else - { - fprintf(fp, "%u\n", (unsigned int) getpid()); - fclose (fp); - } - return; - -} -#endif /* def unix */ - - -/********************************************************************* - * - * Function : hash_string - * - * Description : Take a string and compute a (hopefuly) unique numeric - * integer value. This has several uses, but being able - * to "switch" a string the one of my favorites. - * - * Parameters : - * 1 : s : string to be hashed. - * - * Returns : an unsigned long variable with the hashed value. - * - *********************************************************************/ -unsigned int hash_string( const char* s ) -{ - unsigned int h = 0; - - for ( ; *s; ++s ) - { - h = 5 * h + (unsigned int)*s; - } - - return (h); - -} - - -#ifdef __MINGW32__ -/********************************************************************* - * - * Function : strdup - * - * Description : For some reason (which is beyond me), gcc and WIN32 - * don't like strdup. When a "free" is executed on a - * strdup'd ptr, it can at times freez up! So I just - * replaced it and problem was solved. - * - * Parameters : - * 1 : s = string to duplicate - * - * Returns : Pointer to newly malloc'ed copy of the string. - * - *********************************************************************/ -char *strdup( const char *s ) -{ - char * result = (char *)malloc( strlen(s)+1 ); - - if (result != NULL) - { - strcpy( result, s ); - } - - return( result ); -} - -#endif /* def __MINGW32__ */ - - - -/********************************************************************* - * - * Function : safe_strerror - * - * Description : Variant of the library routine strerror() which will - * work on systems without the library routine, and - * which should never return NULL. - * - * Parameters : - * 1 : err = the `errno' of the last operation. - * - * Returns : An "English" string of the last `errno'. Allocated - * with strdup(), so caller frees. May be NULL if the - * system is out of memory. - * - *********************************************************************/ -char *safe_strerror(int err) -{ - char *s = NULL; - char buf[BUFFER_SIZE]; - - -#ifdef HAVE_STRERROR - s = strerror(err); -#endif /* HAVE_STRERROR */ - - if (s == NULL) - { - snprintf(buf, sizeof(buf), "(errno = %d)", err); - s = buf; - } - - return(strdup(s)); - -} - - -/********************************************************************* - * - * Function : strcmpic - * - * Description : Case insensitive string comparison - * - * Parameters : - * 1 : s1 = string 1 to compare - * 2 : s2 = string 2 to compare - * - * Returns : 0 if s1==s2, Negative if s1<s2, Positive if s1>s2 - * - *********************************************************************/ -int strcmpic(const char *s1, const char *s2) -{ - if (!s1) s1 = ""; - if (!s2) s2 = ""; - - while (*s1 && *s2) - { - if ( ( *s1 != *s2 ) && ( ijb_tolower(*s1) != ijb_tolower(*s2) ) ) - { - break; - } - s1++, s2++; - } - return(ijb_tolower(*s1) - ijb_tolower(*s2)); - -} - - -/********************************************************************* - * - * Function : strncmpic - * - * Description : Case insensitive string comparison (upto n characters) - * - * Parameters : - * 1 : s1 = string 1 to compare - * 2 : s2 = string 2 to compare - * 3 : n = maximum characters to compare - * - * Returns : 0 if s1==s2, Negative if s1<s2, Positive if s1>s2 - * - *********************************************************************/ -int strncmpic(const char *s1, const char *s2, size_t n) -{ - if (n <= (size_t)0) return(0); - if (!s1) s1 = ""; - if (!s2) s2 = ""; - - while (*s1 && *s2) - { - if ( ( *s1 != *s2 ) && ( ijb_tolower(*s1) != ijb_tolower(*s2) ) ) - { - break; - } - - if (--n <= (size_t)0) break; - - s1++, s2++; - } - return(ijb_tolower(*s1) - ijb_tolower(*s2)); - -} - - -/********************************************************************* - * - * Function : chomp - * - * Description : In-situ-eliminate all leading and trailing whitespace - * from a string. - * - * Parameters : - * 1 : s : string to be chomped. - * - * Returns : chomped string - * - *********************************************************************/ -char *chomp(char *string) -{ - char *p, *q, *r; - - /* - * strip trailing whitespace - */ - p = string + strlen(string); - while (p > string && ijb_isspace(*(p-1))) - { - p--; - } - *p = '\0'; - - /* - * find end of leading whitespace - */ - q = r = string; - while (*q && ijb_isspace(*q)) - { - q++; - } - - /* - * if there was any, move the rest forwards - */ - if (q != string) - { - while (q <= p) - { - *r++ = *q++; - } - } - - return(string); - -} - - -/********************************************************************* - * - * Function : string_append - * - * Description : Reallocate target_string and append text to it. - * This makes it easier to append to malloc'd strings. - * This is similar to the (removed) strsav(), but - * running out of memory isn't catastrophic. - * - * Programming style: - * - * The following style provides sufficient error - * checking for this routine, with minimal clutter - * in the source code. It is recommended if you - * have many calls to this function: - * - * char * s = strdup(...); // don't check for error - * string_append(&s, ...); // don't check for error - * string_append(&s, ...); // don't check for error - * string_append(&s, ...); // don't check for error - * if (NULL == s) { ... handle error ... } - * - * OR, equivalently: - * - * char * s = strdup(...); // don't check for error - * string_append(&s, ...); // don't check for error - * string_append(&s, ...); // don't check for error - * if (string_append(&s, ...)) {... handle error ...} - * - * Parameters : - * 1 : target_string = Pointer to old text that is to be - * extended. *target_string will be free()d by this - * routine. target_string must be non-NULL. - * If *target_string is NULL, this routine will - * do nothing and return with an error - this allows - * you to make many calls to this routine and only - * check for errors after the last one. - * 2 : text_to_append = Text to be appended to old. - * Must not be NULL. - * - * Returns : JB_ERR_OK on success, and sets *target_string - * to newly malloc'ed appended string. Caller - * must free(*target_string). - * JB_ERR_MEMORY on out-of-memory. (And free()s - * *target_string and sets it to NULL). - * JB_ERR_MEMORY if *target_string is NULL. - * - *********************************************************************/ -jb_err string_append(char **target_string, const char *text_to_append) -{ - size_t old_len; - char *new_string; - size_t new_size; - - assert(target_string); - assert(text_to_append); - - if (*target_string == NULL) - { - return JB_ERR_MEMORY; - } - - if (*text_to_append == '\0') - { - return JB_ERR_OK; - } - - old_len = strlen(*target_string); - - new_size = strlen(text_to_append) + old_len + 1; - - if (NULL == (new_string = realloc(*target_string, new_size))) - { - free(*target_string); - - *target_string = NULL; - return JB_ERR_MEMORY; - } - - strlcpy(new_string + old_len, text_to_append, new_size - old_len); - - *target_string = new_string; - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : string_join - * - * Description : Join two strings together. Frees BOTH the original - * strings. If either or both input strings are NULL, - * fails as if it had run out of memory. - * - * For comparison, string_append requires that the - * second string is non-NULL, and doesn't free it. - * - * Rationale: Too often, we want to do - * string_append(s, html_encode(s2)). That assert()s - * if s2 is NULL or if html_encode() runs out of memory. - * It also leaks memory. Proper checking is cumbersome. - * The solution: string_join(s, html_encode(s2)) is safe, - * and will free the memory allocated by html_encode(). - * - * Parameters : - * 1 : target_string = Pointer to old text that is to be - * extended. *target_string will be free()d by this - * routine. target_string must be non-NULL. - * 2 : text_to_append = Text to be appended to old. - * - * Returns : JB_ERR_OK on success, and sets *target_string - * to newly malloc'ed appended string. Caller - * must free(*target_string). - * JB_ERR_MEMORY on out-of-memory, or if - * *target_string or text_to_append is NULL. (In - * this case, frees *target_string and text_to_append, - * sets *target_string to NULL). - * - *********************************************************************/ -jb_err string_join(char **target_string, char *text_to_append) -{ - jb_err err; - - assert(target_string); - - if (text_to_append == NULL) - { - freez(*target_string); - return JB_ERR_MEMORY; - } - - err = string_append(target_string, text_to_append); - - freez(text_to_append); - - return err; -} - - -/********************************************************************* - * - * Function : string_toupper - * - * Description : Produce a copy of string with all convertible - * characters converted to uppercase. - * - * Parameters : - * 1 : string = string to convert - * - * Returns : Uppercase copy of string if possible, - * NULL on out-of-memory or if string was NULL. - * - *********************************************************************/ -char *string_toupper(const char *string) -{ - char *result, *p; - const char *q; - - if (!string || ((result = (char *) zalloc(strlen(string) + 1)) == NULL)) - { - return NULL; - } - - q = string; - p = result; - - while (*q != '\0') - { - *p++ = (char)toupper((int) *q++); - } - - return result; - -} - - -/********************************************************************* - * - * Function : bindup - * - * Description : Duplicate the first n characters of a string that may - * contain '\0' characters. - * - * Parameters : - * 1 : string = string to be duplicated - * 2 : len = number of bytes to duplicate - * - * Returns : pointer to copy, or NULL if failiure - * - *********************************************************************/ -char *bindup(const char *string, size_t len) -{ - char *duplicate; - - if (NULL == (duplicate = (char *)malloc(len))) - { - return NULL; - } - else - { - memcpy(duplicate, string, len); - } - - return duplicate; - -} - - -/********************************************************************* - * - * Function : make_path - * - * Description : Takes a directory name and a file name, returns - * the complete path. Handles windows/unix differences. - * If the file name is already an absolute path, or if - * the directory name is NULL or empty, it returns - * the filename. - * - * Parameters : - * 1 : dir: Name of directory or NULL for none. - * 2 : file: Name of file. Should not be NULL or empty. - * - * Returns : "dir/file" (Or on windows, "dir\file"). - * It allocates the string on the heap. Caller frees. - * Returns NULL in error (i.e. NULL file or out of - * memory) - * - *********************************************************************/ -char * make_path(const char * dir, const char * file) -{ -#ifdef AMIGA - char path[512]; - - if(dir) - { - if(dir[0] == '.') - { - if(dir[1] == '/') - { - strncpy(path,dir+2,512); - } - else - { - strncpy(path,dir+1,512); - } - } - else - { - strncpy(path,dir,512); - } - path[511]=0; - } - else - { - path[0]=0; - } - if(AddPart(path,file,512)) - { - return strdup(path); - } - else - { - return NULL; - } -#else /* ndef AMIGA */ - - if ((file == NULL) || (*file == '\0')) - { - return NULL; /* Error */ - } - - if ((dir == NULL) || (*dir == '\0') /* No directory specified */ -#if defined(_WIN32) || defined(__OS2__) - || (*file == '\\') || (file[1] == ':') /* Absolute path (DOS) */ -#else /* ifndef _WIN32 || __OS2__ */ - || (*file == '/') /* Absolute path (U*ix) */ -#endif /* ifndef _WIN32 || __OS2__ */ - ) - { - return strdup(file); - } - else - { - char * path; - size_t path_size = strlen(dir) + strlen(file) + 2; /* +2 for trailing (back)slash and \0 */ - -#if defined(unix) - if ( *dir != '/' && basedir && *basedir ) - { - /* - * Relative path, so start with the base directory. - */ - path_size += strlen(basedir) + 1; /* +1 for the slash */ - path = malloc(path_size); - if (!path ) log_error(LOG_LEVEL_FATAL, "malloc failed!"); - strlcpy(path, basedir, path_size); - strlcat(path, "/", path_size); - strlcat(path, dir, path_size); - } - else -#endif /* defined unix */ - { - path = malloc(path_size); - if (!path ) log_error(LOG_LEVEL_FATAL, "malloc failed!"); - strlcpy(path, dir, path_size); - } - -#if defined(_WIN32) || defined(__OS2__) - if(path[strlen(path)-1] != '\\') - { - strlcat(path, "\\", path_size); - } -#else /* ifndef _WIN32 || __OS2__ */ - if(path[strlen(path)-1] != '/') - { - strlcat(path, "/", path_size); - } -#endif /* ifndef _WIN32 || __OS2__ */ - strlcat(path, file, path_size); - - return path; - } -#endif /* ndef AMIGA */ -} - - -/********************************************************************* - * - * Function : pick_from_range - * - * Description : Pick a positive number out of a given range. - * Should only be used if randomness would be nice, - * but isn't really necessary. - * - * Parameters : - * 1 : range: Highest possible number to pick. - * - * Returns : Picked number. - * - *********************************************************************/ -long int pick_from_range(long int range) -{ - long int number; -#ifdef _WIN32 - static unsigned long seed = 0; -#endif /* def _WIN32 */ - - assert(range != 0); - assert(range > 0); - - if (range <= 0) return 0; - -#ifdef HAVE_RANDOM - number = random() % range + 1; -#elif defined(MUTEX_LOCKS_AVAILABLE) - privoxy_mutex_lock(&rand_mutex); -#ifdef _WIN32 - if (!seed) - { - seed = (unsigned long)(GetCurrentThreadId()+GetTickCount()); - } - srand(seed); - seed = (unsigned long)((rand() << 16) + rand()); -#endif /* def _WIN32 */ - number = (unsigned long)((rand() << 16) + (rand())) % (unsigned long)(range + 1); - privoxy_mutex_unlock(&rand_mutex); -#else - /* - * XXX: Which platforms reach this and are there - * better options than just using rand() and hoping - * that it's safe? - */ - log_error(LOG_LEVEL_INFO, "No thread-safe PRNG available? Header time randomization " - "might cause crashes, predictable results or even combine these fine options."); - number = rand() % (long int)(range + 1); - -#endif /* (def HAVE_RANDOM) */ - - return number; -} - - -#ifdef USE_PRIVOXY_STRLCPY -/********************************************************************* - * - * Function : privoxy_strlcpy - * - * Description : strlcpy(3) look-alike for those without decent libc. - * - * Parameters : - * 1 : destination: buffer to copy into. - * 2 : source: String to copy. - * 3 : size: Size of destination buffer. - * - * Returns : The length of the string that privoxy_strlcpy() tried to create. - * - *********************************************************************/ -size_t privoxy_strlcpy(char *destination, const char *source, const size_t size) -{ - if (0 < size) - { - snprintf(destination, size, "%s", source); - /* - * Platforms that lack strlcpy() also tend to have - * a broken snprintf implementation that doesn't - * guarantee nul termination. - * - * XXX: the configure script should detect and reject those. - */ - destination[size-1] = '\0'; - } - return strlen(source); -} -#endif /* def USE_PRIVOXY_STRLCPY */ - - -#ifndef HAVE_STRLCAT -/********************************************************************* - * - * Function : privoxy_strlcat - * - * Description : strlcat(3) look-alike for those without decent libc. - * - * Parameters : - * 1 : destination: C string. - * 2 : source: String to copy. - * 3 : size: Size of destination buffer. - * - * Returns : The length of the string that privoxy_strlcat() tried to create. - * - *********************************************************************/ -size_t privoxy_strlcat(char *destination, const char *source, const size_t size) -{ - const size_t old_length = strlen(destination); - return old_length + strlcpy(destination + old_length, source, size - old_length); -} -#endif /* ndef HAVE_STRLCAT */ - - -#if !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) -/********************************************************************* - * - * Function : timegm - * - * Description : libc replacement function for the inverse of gmtime(). - * Copyright (C) 2004 Free Software Foundation, Inc. - * - * Code originally copied from GnuPG, modifications done - * for Privoxy: style changed, #ifdefs for _WIN32 added - * to have it work on mingw32. - * - * XXX: It's very unlikely to happen, but if the malloc() - * call fails the time zone will be permanently set to UTC. - * - * Parameters : - * 1 : tm: Broken-down time struct. - * - * Returns : tm converted into time_t seconds. - * - *********************************************************************/ -time_t timegm(struct tm *tm) -{ - time_t answer; - char *zone; - - zone = getenv("TZ"); - putenv("TZ=UTC"); - tzset(); - answer = mktime(tm); - if (zone) - { - char *old_zone; - - old_zone = malloc(3 + strlen(zone) + 1); - if (old_zone) - { - strcpy(old_zone, "TZ="); - strcat(old_zone, zone); - putenv(old_zone); -#ifdef _WIN32 - free(old_zone); -#endif /* def _WIN32 */ - } - } - else - { -#ifdef HAVE_UNSETENV - unsetenv("TZ"); -#elif defined(_WIN32) - putenv("TZ="); -#else - putenv("TZ"); -#endif - } - tzset(); - - return answer; -} -#endif /* !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) */ - - -#ifndef HAVE_SNPRINTF -/* - * What follows is a portable snprintf routine, written by Mark Martinec. - * See: http://www.ijs.si/software/snprintf/ - - snprintf.c - - a portable implementation of snprintf, - including vsnprintf.c, asnprintf, vasnprintf, asprintf, vasprintf - - snprintf is a routine to convert numeric and string arguments to - formatted strings. It is similar to sprintf(3) provided in a system's - C library, yet it requires an additional argument - the buffer size - - and it guarantees never to store anything beyond the given buffer, - regardless of the format or arguments to be formatted. Some newer - operating systems do provide snprintf in their C library, but many do - not or do provide an inadequate (slow or idiosyncratic) version, which - calls for a portable implementation of this routine. - -Author - - Mark Martinec <mark.martinec(a)ijs.si>, April 1999, June 2000 - Copyright © 1999, Mark Martinec - - */ - -#define PORTABLE_SNPRINTF_VERSION_MAJOR 2 -#define PORTABLE_SNPRINTF_VERSION_MINOR 2 - -#if defined(NEED_ASPRINTF) || defined(NEED_ASNPRINTF) || defined(NEED_VASPRINTF) || defined(NEED_VASNPRINTF) -# if defined(NEED_SNPRINTF_ONLY) -# undef NEED_SNPRINTF_ONLY -# endif -# if !defined(PREFER_PORTABLE_SNPRINTF) -# define PREFER_PORTABLE_SNPRINTF -# endif -#endif - -#if defined(SOLARIS_BUG_COMPATIBLE) && !defined(SOLARIS_COMPATIBLE) -#define SOLARIS_COMPATIBLE -#endif - -#if defined(HPUX_BUG_COMPATIBLE) && !defined(HPUX_COMPATIBLE) -#define HPUX_COMPATIBLE -#endif - -#if defined(DIGITAL_UNIX_BUG_COMPATIBLE) && !defined(DIGITAL_UNIX_COMPATIBLE) -#define DIGITAL_UNIX_COMPATIBLE -#endif - -#if defined(PERL_BUG_COMPATIBLE) && !defined(PERL_COMPATIBLE) -#define PERL_COMPATIBLE -#endif - -#if defined(LINUX_BUG_COMPATIBLE) && !defined(LINUX_COMPATIBLE) -#define LINUX_COMPATIBLE -#endif - -#include <sys/types.h> -#include <string.h> -#include <stdlib.h> -#include <stdio.h> -#include <stdarg.h> -#include <assert.h> -#include <errno.h> - -#ifdef isdigit -#undef isdigit -#endif -#define isdigit(c) ((c) >= '0' && (c) <= '9') - -/* For copying strings longer or equal to 'breakeven_point' - * it is more efficient to call memcpy() than to do it inline. - * The value depends mostly on the processor architecture, - * but also on the compiler and its optimization capabilities. - * The value is not critical, some small value greater than zero - * will be just fine if you don't care to squeeze every drop - * of performance out of the code. - * - * Small values favor memcpy, large values favor inline code. - */ -#if defined(__alpha__) || defined(__alpha) -# define breakeven_point 2 /* AXP (DEC Alpha) - gcc or cc or egcs */ -#endif -#if defined(__i386__) || defined(__i386) -# define breakeven_point 12 /* Intel Pentium/Linux - gcc 2.96 */ -#endif -#if defined(__hppa) -# define breakeven_point 10 /* HP-PA - gcc */ -#endif -#if defined(__sparc__) || defined(__sparc) -# define breakeven_point 33 /* Sun Sparc 5 - gcc 2.8.1 */ -#endif - -/* some other values of possible interest: */ -/* #define breakeven_point 8 */ /* VAX 4000 - vaxc */ -/* #define breakeven_point 19 */ /* VAX 4000 - gcc 2.7.0 */ - -#ifndef breakeven_point -# define breakeven_point 6 /* some reasonable one-size-fits-all value */ -#endif - -#define fast_memcpy(d,s,n) \ - { register size_t nn = (size_t)(n); \ - if (nn >= breakeven_point) memcpy((d), (s), nn); \ - else if (nn > 0) { /* proc call overhead is worth only for large strings*/\ - register char *dd; register const char *ss; \ - for (ss=(s), dd=(d); nn>0; nn--) *dd++ = *ss++; } } - -#define fast_memset(d,c,n) \ - { register size_t nn = (size_t)(n); \ - if (nn >= breakeven_point) memset((d), (int)(c), nn); \ - else if (nn > 0) { /* proc call overhead is worth only for large strings*/\ - register char *dd; register const int cc=(int)(c); \ - for (dd=(d); nn>0; nn--) *dd++ = cc; } } - -/* prototypes */ - -#if defined(NEED_ASPRINTF) -int asprintf (char **ptr, const char *fmt, /*args*/ ...); -#endif -#if defined(NEED_VASPRINTF) -int vasprintf (char **ptr, const char *fmt, va_list ap); -#endif -#if defined(NEED_ASNPRINTF) -int asnprintf (char **ptr, size_t str_m, const char *fmt, /*args*/ ...); -#endif -#if defined(NEED_VASNPRINTF) -int vasnprintf (char **ptr, size_t str_m, const char *fmt, va_list ap); -#endif - -#if defined(HAVE_SNPRINTF) -/* declare our portable snprintf routine under name portable_snprintf */ -/* declare our portable vsnprintf routine under name portable_vsnprintf */ -#else -/* declare our portable routines under names snprintf and vsnprintf */ -#define portable_snprintf snprintf -#if !defined(NEED_SNPRINTF_ONLY) -#define portable_vsnprintf vsnprintf -#endif -#endif - -#if !defined(HAVE_SNPRINTF) || defined(PREFER_PORTABLE_SNPRINTF) -int portable_snprintf(char *str, size_t str_m, const char *fmt, /*args*/ ...); -#if !defined(NEED_SNPRINTF_ONLY) -int portable_vsnprintf(char *str, size_t str_m, const char *fmt, va_list ap); -#endif -#endif - -/* declarations */ - -static char credits[] = "\n\ -(a)(#)snprintf.c, v2.2: Mark Martinec, <mark.martinec(a)ijs.si>\n\ -(a)(#)snprintf.c, v2.2: Copyright 1999, Mark Martinec. Frontier Artistic License applies.\n\ -(a)(#)snprintf.c, v2.2: http://www.ijs.si/software/snprintf/\n"; - -#if defined(NEED_ASPRINTF) -int asprintf(char **ptr, const char *fmt, /*args*/ ...) { - va_list ap; - size_t str_m; - int str_l; - - *ptr = NULL; - va_start(ap, fmt); /* measure the required size */ - str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap); - va_end(ap); - assert(str_l >= 0); /* possible integer overflow if str_m > INT_MAX */ - *ptr = (char *) malloc(str_m = (size_t)str_l + 1); - if (*ptr == NULL) { errno = ENOMEM; str_l = -1; } - else { - int str_l2; - va_start(ap, fmt); - str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap); - va_end(ap); - assert(str_l2 == str_l); - } - return str_l; -} -#endif - -#if defined(NEED_VASPRINTF) -int vasprintf(char **ptr, const char *fmt, va_list ap) { - size_t str_m; - int str_l; - - *ptr = NULL; - { va_list ap2; - va_copy(ap2, ap); /* don't consume the original ap, we'll need it again */ - str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap2);/*get required size*/ - va_end(ap2); - } - assert(str_l >= 0); /* possible integer overflow if str_m > INT_MAX */ - *ptr = (char *) malloc(str_m = (size_t)str_l + 1); - if (*ptr == NULL) { errno = ENOMEM; str_l = -1; } - else { - int str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap); - assert(str_l2 == str_l); - } - return str_l; -} -#endif - -#if defined(NEED_ASNPRINTF) -int asnprintf (char **ptr, size_t str_m, const char *fmt, /*args*/ ...) { - va_list ap; - int str_l; - - *ptr = NULL; - va_start(ap, fmt); /* measure the required size */ - str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap); - va_end(ap); - assert(str_l >= 0); /* possible integer overflow if str_m > INT_MAX */ - if ((size_t)str_l + 1 < str_m) str_m = (size_t)str_l + 1; /* truncate */ - /* if str_m is 0, no buffer is allocated, just set *ptr to NULL */ - if (str_m == 0) { /* not interested in resulting string, just return size */ - } else { - *ptr = (char *) malloc(str_m); - if (*ptr == NULL) { errno = ENOMEM; str_l = -1; } - else { - int str_l2; - va_start(ap, fmt); - str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap); - va_end(ap); - assert(str_l2 == str_l); - } - } - return str_l; -} -#endif - -#if defined(NEED_VASNPRINTF) -int vasnprintf (char **ptr, size_t str_m, const char *fmt, va_list ap) { - int str_l; - - *ptr = NULL; - { va_list ap2; - va_copy(ap2, ap); /* don't consume the original ap, we'll need it again */ - str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap2);/*get required size*/ - va_end(ap2); - } - assert(str_l >= 0); /* possible integer overflow if str_m > INT_MAX */ - if ((size_t)str_l + 1 < str_m) str_m = (size_t)str_l + 1; /* truncate */ - /* if str_m is 0, no buffer is allocated, just set *ptr to NULL */ - if (str_m == 0) { /* not interested in resulting string, just return size */ - } else { - *ptr = (char *) malloc(str_m); - if (*ptr == NULL) { errno = ENOMEM; str_l = -1; } - else { - int str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap); - assert(str_l2 == str_l); - } - } - return str_l; -} -#endif - -/* - * If the system does have snprintf and the portable routine is not - * specifically required, this module produces no code for snprintf/vsnprintf. - */ -#if !defined(HAVE_SNPRINTF) || defined(PREFER_PORTABLE_SNPRINTF) - -#if !defined(NEED_SNPRINTF_ONLY) -int portable_snprintf(char *str, size_t str_m, const char *fmt, /*args*/ ...) { - va_list ap; - int str_l; - - va_start(ap, fmt); - str_l = portable_vsnprintf(str, str_m, fmt, ap); - va_end(ap); - return str_l; -} -#endif - -#if defined(NEED_SNPRINTF_ONLY) -int portable_snprintf(char *str, size_t str_m, const char *fmt, /*args*/ ...) { -#else -int portable_vsnprintf(char *str, size_t str_m, const char *fmt, va_list ap) { -#endif - -#if defined(NEED_SNPRINTF_ONLY) - va_list ap; -#endif - size_t str_l = 0; - const char *p = fmt; - -/* In contrast with POSIX, the ISO C99 now says - * that str can be NULL and str_m can be 0. - * This is more useful than the old: if (str_m < 1) return -1; */ - -#if defined(NEED_SNPRINTF_ONLY) - va_start(ap, fmt); -#endif - if (!p) p = ""; - while (*p) { - if (*p != '%') { - /* if (str_l < str_m) str[str_l++] = *p++; -- this would be sufficient */ - /* but the following code achieves better performance for cases - * where format string is long and contains few conversions */ - const char *q = strchr(p+1,'%'); - size_t n = !q ? strlen(p) : (q-p); - if (str_l < str_m) { - size_t avail = str_m-str_l; - fast_memcpy(str+str_l, p, (n>avail?avail:n)); - } - p += n; str_l += n; - } else { - const char *starting_p; - size_t min_field_width = 0, precision = 0; - int zero_padding = 0, precision_specified = 0, justify_left = 0; - int alternate_form = 0, force_sign = 0; - int space_for_positive = 1; /* If both the ' ' and '+' flags appear, - the ' ' flag should be ignored. */ - char length_modifier = '\0'; /* allowed values: \0, h, l, L */ - char tmp[32];/* temporary buffer for simple numeric->string conversion */ - - const char *str_arg; /* string address in case of string argument */ - size_t str_arg_l; /* natural field width of arg without padding - and sign */ - unsigned char uchar_arg; - /* unsigned char argument value - only defined for c conversion. - N.B. standard explicitly states the char argument for - the c conversion is unsigned */ - - size_t number_of_zeros_to_pad = 0; - /* number of zeros to be inserted for numeric conversions - as required by the precision or minimal field width */ - - size_t zero_padding_insertion_ind = 0; - /* index into tmp where zero padding is to be inserted */ - - char fmt_spec = '\0'; - /* current conversion specifier character */ - - str_arg = credits;/* just to make compiler happy (defined but not used)*/ - str_arg = NULL; - starting_p = p; p++; /* skip '%' */ - /* parse flags */ - while (*p == '0' || *p == '-' || *p == '+' || - *p == ' ' || *p == '#' || *p == '\'') { - switch (*p) { - case '0': zero_padding = 1; break; - case '-': justify_left = 1; break; - case '+': force_sign = 1; space_for_positive = 0; break; - case ' ': force_sign = 1; - /* If both the ' ' and '+' flags appear, the ' ' flag should be ignored */ -#ifdef PERL_COMPATIBLE - /* ... but in Perl the last of ' ' and '+' applies */ - space_for_positive = 1; -#endif - break; - case '#': alternate_form = 1; break; - case '\'': break; - } - p++; - } - /* If the '0' and '-' flags both appear, the '0' flag should be ignored. */ - - /* parse field width */ - if (*p == '*') { - int j; - p++; j = va_arg(ap, int); - if (j >= 0) min_field_width = j; - else { min_field_width = -j; justify_left = 1; } - } else if (isdigit((int)(*p))) { - /* size_t could be wider than unsigned int; - make sure we treat argument like common implementations do */ - unsigned int uj = *p++ - '0'; - while (isdigit((int)(*p))) uj = 10*uj + (unsigned int)(*p++ - '0'); - min_field_width = uj; - } - /* parse precision */ - if (*p == '.') { - p++; precision_specified = 1; - if (*p == '*') { - int j = va_arg(ap, int); - p++; - if (j >= 0) precision = j; - else { - precision_specified = 0; precision = 0; - /* NOTE: - * Solaris 2.6 man page claims that in this case the precision - * should be set to 0. Digital Unix 4.0, HPUX 10 and BSD man page - * claim that this case should be treated as unspecified precision, - * which is what we do here. - */ - } - } else if (isdigit((int)(*p))) { - /* size_t could be wider than unsigned int; - make sure we treat argument like common implementations do */ - unsigned int uj = *p++ - '0'; - while (isdigit((int)(*p))) uj = 10*uj + (unsigned int)(*p++ - '0'); - precision = uj; - } - } - /* parse 'h', 'l' and 'll' length modifiers */ - if (*p == 'h' || *p == 'l') { - length_modifier = *p; p++; - if (length_modifier == 'l' && *p == 'l') { /* double l = long long */ -#ifdef SNPRINTF_LONGLONG_SUPPORT - length_modifier = '2'; /* double l encoded as '2' */ -#else - length_modifier = 'l'; /* treat it as a single 'l' */ -#endif - p++; - } - } - fmt_spec = *p; - /* common synonyms: */ - switch (fmt_spec) { - case 'i': fmt_spec = 'd'; break; - case 'D': fmt_spec = 'd'; length_modifier = 'l'; break; - case 'U': fmt_spec = 'u'; length_modifier = 'l'; break; - case 'O': fmt_spec = 'o'; length_modifier = 'l'; break; - default: break; - } - /* get parameter value, do initial processing */ - switch (fmt_spec) { - case '%': /* % behaves similar to 's' regarding flags and field widths */ - case 'c': /* c behaves similar to 's' regarding flags and field widths */ - case 's': - length_modifier = '\0'; /* wint_t and wchar_t not supported */ - /* the result of zero padding flag with non-numeric conversion specifier*/ - /* is undefined. Solaris and HPUX 10 does zero padding in this case, */ - /* Digital Unix and Linux does not. */ -#if !defined(SOLARIS_COMPATIBLE) && !defined(HPUX_COMPATIBLE) - zero_padding = 0; /* turn zero padding off for string conversions */ -#endif - str_arg_l = 1; - switch (fmt_spec) { - case '%': - str_arg = p; break; - case 'c': { - int j = va_arg(ap, int); - uchar_arg = (unsigned char) j; /* standard demands unsigned char */ - str_arg = (const char *) &uchar_arg; - break; - } - case 's': - str_arg = va_arg(ap, const char *); - if (!str_arg) str_arg_l = 0; - /* make sure not to address string beyond the specified precision !!! */ - else if (!precision_specified) str_arg_l = strlen(str_arg); - /* truncate string if necessary as requested by precision */ - else if (precision == 0) str_arg_l = 0; - else { - /* memchr on HP does not like n > 2^31 !!! */ - const char *q = memchr(str_arg, '\0', - precision <= 0x7fffffff ? precision : 0x7fffffff); - str_arg_l = !q ? precision : (q-str_arg); - } - break; - default: break; - } - break; - case 'd': case 'u': case 'o': case 'x': case 'X': case 'p': { - /* NOTE: the u, o, x, X and p conversion specifiers imply - the value is unsigned; d implies a signed value */ - - int arg_sign = 0; - /* 0 if numeric argument is zero (or if pointer is NULL for 'p'), - +1 if greater than zero (or nonzero for unsigned arguments), - -1 if negative (unsigned argument is never negative) */ - - int int_arg = 0; unsigned int uint_arg = 0; - /* only defined for length modifier h, or for no length modifiers */ - - long int long_arg = 0; unsigned long int ulong_arg = 0; - /* only defined for length modifier l */ - - void *ptr_arg = NULL; - /* pointer argument value -only defined for p conversion */ - -#ifdef SNPRINTF_LONGLONG_SUPPORT - long long int long_long_arg = 0; - unsigned long long int ulong_long_arg = 0; - /* only defined for length modifier ll */ -#endif - if (fmt_spec == 'p') { - /* HPUX 10: An l, h, ll or L before any other conversion character - * (other than d, i, u, o, x, or X) is ignored. - * Digital Unix: - * not specified, but seems to behave as HPUX does. - * Solaris: If an h, l, or L appears before any other conversion - * specifier (other than d, i, u, o, x, or X), the behavior - * is undefined. (Actually %hp converts only 16-bits of address - * and %llp treats address as 64-bit data which is incompatible - * with (void *) argument on a 32-bit system). - */ -#ifdef SOLARIS_COMPATIBLE -# ifdef SOLARIS_BUG_COMPATIBLE - /* keep length modifiers even if it represents 'll' */ -# else - if (length_modifier == '2') length_modifier = '\0'; -# endif -#else - length_modifier = '\0'; -#endif - ptr_arg = va_arg(ap, void *); - if (ptr_arg != NULL) arg_sign = 1; - } else if (fmt_spec == 'd') { /* signed */ - switch (length_modifier) { - case '\0': - case 'h': - /* It is non-portable to specify a second argument of char or short - * to va_arg, because arguments seen by the called function - * are not char or short. C converts char and short arguments - * to int before passing them to a function. - */ - int_arg = va_arg(ap, int); - if (int_arg > 0) arg_sign = 1; - else if (int_arg < 0) arg_sign = -1; - break; - case 'l': - long_arg = va_arg(ap, long int); - if (long_arg > 0) arg_sign = 1; - else if (long_arg < 0) arg_sign = -1; - break; -#ifdef SNPRINTF_LONGLONG_SUPPORT - case '2': - long_long_arg = va_arg(ap, long long int); - if (long_long_arg > 0) arg_sign = 1; - else if (long_long_arg < 0) arg_sign = -1; - break; -#endif - } - } else { /* unsigned */ - switch (length_modifier) { - case '\0': - case 'h': - uint_arg = va_arg(ap, unsigned int); - if (uint_arg) arg_sign = 1; - break; - case 'l': - ulong_arg = va_arg(ap, unsigned long int); - if (ulong_arg) arg_sign = 1; - break; -#ifdef SNPRINTF_LONGLONG_SUPPORT - case '2': - ulong_long_arg = va_arg(ap, unsigned long long int); - if (ulong_long_arg) arg_sign = 1; - break; -#endif - } - } - str_arg = tmp; str_arg_l = 0; - /* NOTE: - * For d, i, u, o, x, and X conversions, if precision is specified, - * the '0' flag should be ignored. This is so with Solaris 2.6, - * Digital UNIX 4.0, HPUX 10, Linux, FreeBSD, NetBSD; but not with Perl. - */ -#ifndef PERL_COMPATIBLE - if (precision_specified) zero_padding = 0; -#endif - if (fmt_spec == 'd') { - if (force_sign && arg_sign >= 0) - tmp[str_arg_l++] = space_for_positive ? ' ' : '+'; - /* leave negative numbers for sprintf to handle, - to avoid handling tricky cases like (short int)(-32768) */ -#ifdef LINUX_COMPATIBLE - } else if (fmt_spec == 'p' && force_sign && arg_sign > 0) { - tmp[str_arg_l++] = space_for_positive ? ' ' : '+'; -#endif - } else if (alternate_form) { - if (arg_sign != 0 && (fmt_spec == 'x' || fmt_spec == 'X') ) - { tmp[str_arg_l++] = '0'; tmp[str_arg_l++] = fmt_spec; } - /* alternate form should have no effect for p conversion, but ... */ -#ifdef HPUX_COMPATIBLE - else if (fmt_spec == 'p' - /* HPUX 10: for an alternate form of p conversion, - * a nonzero result is prefixed by 0x. */ -#ifndef HPUX_BUG_COMPATIBLE - /* Actually it uses 0x prefix even for a zero value. */ - && arg_sign != 0 -#endif - ) { tmp[str_arg_l++] = '0'; tmp[str_arg_l++] = 'x'; } -#endif - } - zero_padding_insertion_ind = str_arg_l; - if (!precision_specified) precision = 1; /* default precision is 1 */ - if (precision == 0 && arg_sign == 0 -#if defined(HPUX_BUG_COMPATIBLE) || defined(LINUX_COMPATIBLE) - && fmt_spec != 'p' - /* HPUX 10 man page claims: With conversion character p the result of - * converting a zero value with a precision of zero is a null string. - * Actually HP returns all zeroes, and Linux returns "(nil)". */ -#endif - ) { - /* converted to null string */ - /* When zero value is formatted with an explicit precision 0, - the resulting formatted string is empty (d, i, u, o, x, X, p). */ - } else { - char f[5]; int f_l = 0; - f[f_l++] = '%'; /* construct a simple format string for sprintf */ - if (!length_modifier) { } - else if (length_modifier=='2') { f[f_l++] = 'l'; f[f_l++] = 'l'; } - else f[f_l++] = length_modifier; - f[f_l++] = fmt_spec; f[f_l++] = '\0'; - if (fmt_spec == 'p') str_arg_l += sprintf(tmp+str_arg_l, f, ptr_arg); - else if (fmt_spec == 'd') { /* signed */ - switch (length_modifier) { - case '\0': - case 'h': str_arg_l+=sprintf(tmp+str_arg_l, f, int_arg); break; - case 'l': str_arg_l+=sprintf(tmp+str_arg_l, f, long_arg); break; -#ifdef SNPRINTF_LONGLONG_SUPPORT - case '2': str_arg_l+=sprintf(tmp+str_arg_l,f,long_long_arg); break; -#endif - } - } else { /* unsigned */ - switch (length_modifier) { - case '\0': - case 'h': str_arg_l+=sprintf(tmp+str_arg_l, f, uint_arg); break; - case 'l': str_arg_l+=sprintf(tmp+str_arg_l, f, ulong_arg); break; -#ifdef SNPRINTF_LONGLONG_SUPPORT - case '2': str_arg_l+=sprintf(tmp+str_arg_l,f,ulong_long_arg);break; -#endif - } - } - /* include the optional minus sign and possible "0x" - in the region before the zero padding insertion point */ - if (zero_padding_insertion_ind < str_arg_l && - tmp[zero_padding_insertion_ind] == '-') { - zero_padding_insertion_ind++; - } - if (zero_padding_insertion_ind+1 < str_arg_l && - tmp[zero_padding_insertion_ind] == '0' && - (tmp[zero_padding_insertion_ind+1] == 'x' || - tmp[zero_padding_insertion_ind+1] == 'X') ) { - zero_padding_insertion_ind += 2; - } - } - { size_t num_of_digits = str_arg_l - zero_padding_insertion_ind; - if (alternate_form && fmt_spec == 'o' -#ifdef HPUX_COMPATIBLE /* ("%#.o",0) -> "" */ - && (str_arg_l > 0) -#endif -#ifdef DIGITAL_UNIX_BUG_COMPATIBLE /* ("%#o",0) -> "00" */ -#else - /* unless zero is already the first character */ - && !(zero_padding_insertion_ind < str_arg_l - && tmp[zero_padding_insertion_ind] == '0') -#endif - ) { /* assure leading zero for alternate-form octal numbers */ - if (!precision_specified || precision < num_of_digits+1) { - /* precision is increased to force the first character to be zero, - except if a zero value is formatted with an explicit precision - of zero */ - precision = num_of_digits+1; precision_specified = 1; - } - } - /* zero padding to specified precision? */ - if (num_of_digits < precision) - number_of_zeros_to_pad = precision - num_of_digits; - } - /* zero padding to specified minimal field width? */ - if (!justify_left && zero_padding) { - int n = min_field_width - (str_arg_l+number_of_zeros_to_pad); - if (n > 0) number_of_zeros_to_pad += n; - } - break; - } - default: /* unrecognized conversion specifier, keep format string as-is*/ - zero_padding = 0; /* turn zero padding off for non-numeric convers. */ -#ifndef DIGITAL_UNIX_COMPATIBLE - justify_left = 1; min_field_width = 0; /* reset flags */ -#endif -#if defined(PERL_COMPATIBLE) || defined(LINUX_COMPATIBLE) - /* keep the entire format string unchanged */ - str_arg = starting_p; str_arg_l = p - starting_p; - /* well, not exactly so for Linux, which does something inbetween, - * and I don't feel an urge to imitate it: "%+++++hy" -> "%+y" */ -#else - /* discard the unrecognized conversion, just keep * - * the unrecognized conversion character */ - str_arg = p; str_arg_l = 0; -#endif - if (*p) str_arg_l++; /* include invalid conversion specifier unchanged - if not at end-of-string */ - break; - } - if (*p) p++; /* step over the just processed conversion specifier */ - /* insert padding to the left as requested by min_field_width; - this does not include the zero padding in case of numerical conversions*/ - if (!justify_left) { /* left padding with blank or zero */ - int n = min_field_width - (str_arg_l+number_of_zeros_to_pad); - if (n > 0) { - if (str_l < str_m) { - size_t avail = str_m-str_l; - fast_memset(str+str_l, (zero_padding?'0':' '), (n>avail?avail:n)); - } - str_l += n; - } - } - /* zero padding as requested by the precision or by the minimal field width - * for numeric conversions required? */ - if (number_of_zeros_to_pad <= 0) { - /* will not copy first part of numeric right now, * - * force it to be copied later in its entirety */ - zero_padding_insertion_ind = 0; - } else { - /* insert first part of numerics (sign or '0x') before zero padding */ - int n = zero_padding_insertion_ind; - if (n > 0) { - if (str_l < str_m) { - size_t avail = str_m-str_l; - fast_memcpy(str+str_l, str_arg, (n>avail?avail:n)); - } - str_l += n; - } - /* insert zero padding as requested by the precision or min field width */ - n = number_of_zeros_to_pad; - if (n > 0) { - if (str_l < str_m) { - size_t avail = str_m-str_l; - fast_memset(str+str_l, '0', (n>avail?avail:n)); - } - str_l += n; - } - } - /* insert formatted string - * (or as-is conversion specifier for unknown conversions) */ - { int n = str_arg_l - zero_padding_insertion_ind; - if (n > 0) { - if (str_l < str_m) { - size_t avail = str_m-str_l; - fast_memcpy(str+str_l, str_arg+zero_padding_insertion_ind, - (n>avail?avail:n)); - } - str_l += n; - } - } - /* insert right padding */ - if (justify_left) { /* right blank padding to the field width */ - int n = min_field_width - (str_arg_l+number_of_zeros_to_pad); - if (n > 0) { - if (str_l < str_m) { - size_t avail = str_m-str_l; - fast_memset(str+str_l, ' ', (n>avail?avail:n)); - } - str_l += n; - } - } - } - } -#if defined(NEED_SNPRINTF_ONLY) - va_end(ap); -#endif - if (str_m > 0) { /* make sure the string is null-terminated - even at the expense of overwriting the last character - (shouldn't happen, but just in case) */ - str[str_l <= str_m-1 ? str_l : str_m-1] = '\0'; - } - /* Return the number of characters formatted (excluding trailing null - * character), that is, the number of characters that would have been - * written to the buffer if it were large enough. - * - * The value of str_l should be returned, but str_l is of unsigned type - * size_t, and snprintf is int, possibly leading to an undetected - * integer overflow, resulting in a negative return value, which is illegal. - * Both XSH5 and ISO C99 (at least the draft) are silent on this issue. - * Should errno be set to EOVERFLOW and EOF returned in this case??? - */ - return (int) str_l; -} -#endif -#endif /* ndef HAVE_SNPRINTF */ -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/miscutil.h b/external/privoxy/miscutil.h deleted file mode 100644 index a0498ac..0000000 --- a/external/privoxy/miscutil.h +++ /dev/null @@ -1,259 +0,0 @@ -#ifndef MISCUTIL_H_INCLUDED -#define MISCUTIL_H_INCLUDED -#define MISCUTIL_H_VERSION "$Id: miscutil.h,v 1.30 2008/04/17 14:53:31 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/miscutil.h,v $ - * - * Purpose : zalloc, hash_string, safe_strerror, strcmpic, - * strncmpic, and MinGW32 strdup functions. These are - * each too small to deserve their own file but don't - * really fit in any other file. - * - * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: miscutil.h,v $ - * Revision 1.30 2008/04/17 14:53:31 fabiankeil - * Move simplematch() into urlmatch.c as it's only - * used to match (old-school) domain patterns. - * - * Revision 1.29 2007/09/09 18:20:20 fabiankeil - * Turn privoxy_strlcpy() into a function and try to work with - * b0rked snprintf() implementations too. Reported by icmp30. - * - * Revision 1.28 2007/05/11 11:48:16 fabiankeil - * - Delete strsav() which was replaced - * by string_append() years ago. - * - Add a strlcat() look-alike. - * - Use strlcat() and strlcpy() in those parts - * of the code that are run on unixes. - * - * Revision 1.27 2007/04/09 17:48:51 fabiankeil - * Check for HAVE_SNPRINTF instead of __OS2__ - * before including the portable snprintf() code. - * - * Revision 1.26 2007/04/08 17:04:51 fabiankeil - * Add macro for strlcpy() in case the libc lacks it. - * - * Revision 1.25 2007/01/18 15:03:20 fabiankeil - * Don't include replacement timegm() if - * putenv() or tzset() isn't available. - * - * Revision 1.24 2006/08/17 17:15:10 fabiankeil - * - Back to timegm() using GnuPG's replacement if necessary. - * Using mktime() and localtime() could add a on hour offset if - * the randomize factor was big enough to lead to a summer/wintertime - * switch. - * - * - Removed now-useless Privoxy 3.0.3 compatibility glue. - * - * - Moved randomization code into pick_from_range(). - * - * - Changed parse_header_time definition. - * time_t isn't guaranteed to be signed and - * if it isn't, -1 isn't available as error code. - * Changed some variable types in client_if_modified_since() - * because of the same reason. - * - * Revision 1.23 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.21 2002/04/26 12:55:38 oes - * New function string_toupper - * - * Revision 1.20 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.19 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.18 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.17 2002/03/04 18:28:32 oes - * Deleted deletePidFile, played syleguide police - * - * Revision 1.16 2002/01/21 00:53:36 jongfoster - * Adding string_join() - * - * Revision 1.15 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.14 2001/11/05 21:43:48 steudten - * Add global var 'basedir' for unix os. - * - * Revision 1.13 2001/10/29 03:48:10 david__schmidt - * OS/2 native needed a snprintf() routine. Added one to miscutil, brackedted - * by and __OS2__ ifdef. - * - * Revision 1.12 2001/10/23 21:27:50 jongfoster - * Standardising error codes in string_append - * make_path() no longer adds '\\' if the dir already ends in '\\' (this - * is just copying a UNIX-specific fix to the Windows-specific part) - * - * Revision 1.11 2001/10/14 22:02:57 jongfoster - * New function string_append() which is like strsav(), but running - * out of memory isn't automatically FATAL. - * - * Revision 1.10 2001/09/20 13:34:09 steudten - * - * change long to int for prototype hash_string() - * - * Revision 1.9 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.8 2001/06/29 13:32:14 oes - * Removed logentry from cancelled commit - * - * Revision 1.7 2001/06/05 22:32:01 jongfoster - * New function make_path() to splice directory and file names together. - * - * Revision 1.6 2001/06/03 19:12:30 oes - * introduced bindup() - * - * Revision 1.5 2001/06/01 10:31:51 oes - * Added character class matching to trivimatch; renamed to simplematch - * - * Revision 1.4 2001/05/31 17:32:31 oes - * - * - Enhanced domain part globbing with infix and prefix asterisk - * matching and optional unanchored operation - * - * Revision 1.3 2001/05/29 23:10:09 oes - * - * - * - Introduced chomp() - * - Moved strsav() from showargs to miscutil - * - * Revision 1.2 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.1.1.1 2001/05/15 13:59:00 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "project.h" - -#if defined(__cplusplus) -extern "C" { -#endif - -extern const char *basedir; -extern void *zalloc(size_t size); - -#if defined(unix) -extern void write_pid_file(void); -#endif /* unix */ - -extern unsigned int hash_string(const char* s); - -extern char *safe_strerror(int err); - -extern int strcmpic(const char *s1, const char *s2); -extern int strncmpic(const char *s1, const char *s2, size_t n); - -extern jb_err string_append(char **target_string, const char *text_to_append); -extern jb_err string_join (char **target_string, char *text_to_append); - -extern char *string_toupper(const char *string); -extern char *chomp(char *string); -extern char *bindup(const char *string, size_t len); - -extern char *make_path(const char * dir, const char * file); - -long int pick_from_range(long int range); - -#ifdef __MINGW32__ -extern char *strdup(const char *s); -#endif /* def __MINGW32__ */ - -#ifndef HAVE_SNPRINTF -extern int snprintf(char *, size_t, const char *, /*args*/ ...); -#endif /* ndef HAVE_SNPRINTF */ - -#if !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) -time_t timegm(struct tm *tm); -#endif /* !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) */ - -/* Here's looking at you, Ulrich. */ -#if !defined(HAVE_STRLCPY) -size_t privoxy_strlcpy(char *destination, const char *source, size_t size); -#define strlcpy privoxy_strlcpy -#define USE_PRIVOXY_STRLCPY 1 -#define HAVE_STRLCPY 1 -#endif /* ndef HAVE_STRLCPY*/ - -#ifndef HAVE_STRLCAT -size_t privoxy_strlcat(char *destination, const char *source, size_t size); -#define strlcat privoxy_strlcat -#endif /* ndef HAVE_STRLCAT */ - -/* Revision control strings from this header and associated .c file */ -extern const char miscutil_rcs[]; -extern const char miscutil_h_rcs[]; - -#if defined(__cplusplus) -} -#endif - -#endif /* ndef MISCUTIL_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/mkinstalldirs b/external/privoxy/mkinstalldirs deleted file mode 100755 index 3f681b3..0000000 --- a/external/privoxy/mkinstalldirs +++ /dev/null @@ -1,40 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman <friedman(a)prep.ai.mit.edu> -# Created: 1993-05-16 -# Public domain - -# $Id: mkinstalldirs,v 1.4 2006/07/18 14:48:47 david__schmidt Exp $ - -errstatus=0 - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# mkinstalldirs ends here diff --git a/external/privoxy/parsers.c b/external/privoxy/parsers.c deleted file mode 100644 index 021762e..0000000 --- a/external/privoxy/parsers.c +++ /dev/null @@ -1,4740 +0,0 @@ -const char parsers_rcs[] = "$Id: parsers.c,v 1.154 2009/03/13 14:10:07 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/parsers.c,v $ - * - * Purpose : Declares functions to parse/crunch headers and pages. - * Functions declared include: - * `add_to_iob', `client_cookie_adder', `client_from', - * `client_referrer', `client_send_cookie', `client_ua', - * `client_uagent', `client_x_forwarded', - * `client_x_forwarded_adder', `client_xtra_adder', - * `content_type', `crumble', `destroy_list', `enlist', - * `flush_socket', ``get_header', `sed', `filter_header' - * `server_content_encoding', `server_content_disposition', - * `server_last_modified', `client_accept_language', - * `crunch_client_header', `client_if_modified_since', - * `client_if_none_match', `get_destination_from_headers', - * `parse_header_time', `decompress_iob' and `server_set_cookie'. - * - * Copyright : Written by and Copyright (C) 2001-2009 the - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: parsers.c,v $ - * Revision 1.154 2009/03/13 14:10:07 fabiankeil - * Fix some more harmless warnings on amd64. - * - * Revision 1.153 2009/03/07 13:09:17 fabiankeil - * Change csp->expected_content and_csp->expected_content_length from - * size_t to unsigned long long to reduce the likelihood of integer - * overflows that would let us close the connection prematurely. - * Bug found while investigating #2669131, reported by cyberpatrol. - * - * Revision 1.152 2009/03/01 18:43:48 fabiankeil - * Help clang understand that we aren't dereferencing - * NULL pointers here. - * - * Revision 1.151 2009/02/15 14:46:35 fabiankeil - * Don't let hide-referrer{conditional-*}} pass - * Referer headers without http URLs. - * - * Revision 1.150 2008/12/04 18:12:19 fabiankeil - * Fix some cparser warnings. - * - * Revision 1.149 2008/11/21 18:39:53 fabiankeil - * In case of CONNECT requests there's no point - * in trying to keep the connection alive. - * - * Revision 1.148 2008/11/16 12:43:49 fabiankeil - * Turn keep-alive support into a runtime feature - * that is disabled by setting keep-alive-timeout - * to a negative value. - * - * Revision 1.147 2008/11/04 17:20:31 fabiankeil - * HTTP/1.1 responses without Connection - * header imply keep-alive. Act accordingly. - * - * Revision 1.146 2008/10/12 16:46:35 fabiankeil - * Remove obsolete warning about delayed delivery with chunked - * transfer encoding and FEATURE_CONNECTION_KEEP_ALIVE enabled. - * - * Revision 1.145 2008/10/09 18:21:41 fabiankeil - * Flush work-in-progress changes to keep outgoing connections - * alive where possible. Incomplete and mostly #ifdef'd out. - * - * Revision 1.144 2008/09/21 13:59:33 fabiankeil - * Treat unknown change-x-forwarded-for parameters as fatal errors. - * - * Revision 1.143 2008/09/21 13:36:52 fabiankeil - * If change-x-forwarded-for{add} is used and the client - * sends multiple X-Forwarded-For headers, append the client's - * IP address to each one of them. "Traditionally" we would - * lose all but the last one. - * - * Revision 1.142 2008/09/20 10:04:33 fabiankeil - * Remove hide-forwarded-for-headers action which has - * been obsoleted by change-x-forwarded-for{block}. - * - * Revision 1.141 2008/09/19 15:26:28 fabiankeil - * Add change-x-forwarded-for{} action to block or add - * X-Forwarded-For headers. Mostly based on code removed - * before 3.0.7. - * - * Revision 1.140 2008/09/12 17:51:43 fabiankeil - * - A few style fixes. - * - Remove a pointless cast. - * - * Revision 1.139 2008/09/04 08:13:58 fabiankeil - * Prepare for critical sections on Windows by adding a - * layer of indirection before the pthread mutex functions. - * - * Revision 1.138 2008/08/30 12:03:07 fabiankeil - * Remove FEATURE_COOKIE_JAR. - * - * Revision 1.137 2008/05/30 15:50:08 fabiankeil - * Remove questionable micro-optimizations - * whose usefulness has never been measured. - * - * Revision 1.136 2008/05/26 16:02:24 fabiankeil - * s@Insufficent@Insufficient@ - * - * Revision 1.135 2008/05/21 20:12:10 fabiankeil - * The whole point of strclean() is to modify the - * first parameter, so don't mark it immutable, - * even though the compiler lets us get away with it. - * - * Revision 1.134 2008/05/21 19:27:25 fabiankeil - * As the wafer actions are gone, we can stop including encode.h. - * - * Revision 1.133 2008/05/21 15:50:47 fabiankeil - * Ditch cast from (char **) to (char **). - * - * Revision 1.132 2008/05/21 15:47:14 fabiankeil - * Streamline sed()'s prototype and declare - * the header parse and add structures static. - * - * Revision 1.131 2008/05/20 20:13:30 fabiankeil - * Factor update_server_headers() out of sed(), ditch the - * first_run hack and make server_patterns_light static. - * - * Revision 1.130 2008/05/19 17:18:04 fabiankeil - * Wrap memmove() calls in string_move() - * to document the purpose in one place. - * - * Revision 1.129 2008/05/17 14:02:07 fabiankeil - * Normalize linear header white space. - * - * Revision 1.128 2008/05/16 16:39:03 fabiankeil - * If a header is split across multiple lines, - * merge them to a single line before parsing them. - * - * Revision 1.127 2008/05/10 13:23:38 fabiankeil - * Don't provide get_header() with the whole client state - * structure when it only needs access to csp->iob. - * - * Revision 1.126 2008/05/03 16:40:45 fabiankeil - * Change content_filters_enabled()'s parameter from - * csp->action to action so it can be also used in the - * CGI code. Don't bother checking if there are filters - * loaded, as that's somewhat besides the point. - * - * Revision 1.125 2008/04/17 14:40:49 fabiankeil - * Provide get_http_time() with the buffer size so it doesn't - * have to blindly assume that the buffer is big enough. - * - * Revision 1.124 2008/04/16 16:38:21 fabiankeil - * Don't pass the whole csp structure to flush_socket() - * when it only needs a file descriptor and a buffer. - * - * Revision 1.123 2008/03/29 12:13:46 fabiankeil - * Remove send-wafer and send-vanilla-wafer actions. - * - * Revision 1.122 2008/03/28 15:13:39 fabiankeil - * Remove inspect-jpegs action. - * - * Revision 1.121 2008/01/05 21:37:03 fabiankeil - * Let client_range() also handle Request-Range headers - * which apparently are still supported by many servers. - * - * Revision 1.120 2008/01/04 17:43:45 fabiankeil - * Improve the warning messages that get logged if the action files - * "enable" filters but no filters of that type have been loaded. - * - * Revision 1.119 2007/12/28 18:32:51 fabiankeil - * In server_content_type(): - * - Don't require leading white space when detecting image content types. - * - Change '... not replaced ...' message to sound less crazy if the text - * type actually is 'text/plain'. - * - Mark the 'text/plain == binary data' assumption for removal. - * - Remove a bunch of trailing white space. - * - * Revision 1.118 2007/12/28 16:56:35 fabiankeil - * Minor server_content_disposition() changes: - * - Don't regenerate the header name all lower-case. - * - Some white space fixes. - * - Remove useless log message in case of ENOMEM. - * - * Revision 1.117 2007/12/06 18:11:50 fabiankeil - * Garbage-collect the code to add a X-Forwarded-For - * header as it seems to be mostly used by accident. - * - * Revision 1.116 2007/12/01 13:04:22 fabiankeil - * Fix a crash on mingw32 with some Last Modified times in the future. - * - * Revision 1.115 2007/11/02 16:52:50 fabiankeil - * Remove a "can't happen" error block which, over - * time, mutated into a "guaranteed to happen" block. - * - * Revision 1.114 2007/10/19 16:56:26 fabiankeil - * - Downgrade "Buffer limit reached" message to LOG_LEVEL_INFO. - * - Use shiny new content_filters_enabled() in client_range(). - * - * Revision 1.113 2007/10/10 17:29:57 fabiankeil - * I forgot about Poland. - * - * Revision 1.112 2007/10/09 16:38:40 fabiankeil - * Remove Range and If-Range headers if content filtering is enabled. - * - * Revision 1.111 2007/10/04 18:07:00 fabiankeil - * Move ACTION_VANILLA_WAFER handling from jcc's chat() into - * client_cookie_adder() to make sure send-vanilla-wafer can be - * controlled through tags (and thus regression-tested). - * - * Revision 1.110 2007/09/29 10:42:37 fabiankeil - * - Remove "scanning headers for" log message again. - * - Some more whitespace fixes. - * - * Revision 1.109 2007/09/08 14:25:48 fabiankeil - * Refactor client_referrer() and add conditional-forge parameter. - * - * Revision 1.108 2007/08/28 18:21:03 fabiankeil - * A bunch of whitespace fixes, pointy hat to me. - * - * Revision 1.107 2007/08/28 18:16:32 fabiankeil - * Fix possible memory corruption in server_http, make sure it's not - * executed for ordinary server headers and mark some problems for later. - * - * Revision 1.106 2007/08/18 14:30:32 fabiankeil - * Let content-type-overwrite{} honour force-text-mode again. - * - * Revision 1.105 2007/08/11 14:49:49 fabiankeil - * - Add prototpyes for the header parsers and make them static. - * - Comment out client_accept_encoding_adder() which isn't used right now. - * - * Revision 1.104 2007/07/14 07:38:19 fabiankeil - * Move the ACTION_FORCE_TEXT_MODE check out of - * server_content_type(). Signal other functions - * whether or not a content type has been declared. - * Part of the fix for BR#1750917. - * - * Revision 1.103 2007/06/01 16:31:54 fabiankeil - * Change sed() to return a jb_err in preparation for forward-override{}. - * - * Revision 1.102 2007/05/27 12:39:32 fabiankeil - * Adjust "X-Filter: No" to disable dedicated header filters. - * - * Revision 1.101 2007/05/14 10:16:41 fabiankeil - * Streamline client_cookie_adder(). - * - * Revision 1.100 2007/04/30 15:53:11 fabiankeil - * Make sure filters with dynamic jobs actually use them. - * - * Revision 1.99 2007/04/30 15:06:26 fabiankeil - * - Introduce dynamic pcrs jobs that can resolve variables. - * - Remove unnecessary update_action_bits_for_all_tags() call. - * - * Revision 1.98 2007/04/17 18:32:10 fabiankeil - * - Make tagging based on tags set by earlier taggers - * of the same kind possible. - * - Log whether or not new tags cause action bits updates - * (in which case a matching tag-pattern section exists). - * - Log if the user tries to set a tag that is already set. - * - * Revision 1.97 2007/04/15 16:39:21 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.96 2007/04/12 12:53:58 fabiankeil - * Log a warning if the content is compressed, filtering is - * enabled and Privoxy was compiled without zlib support. - * Closes FR#1673938. - * - * Revision 1.95 2007/03/25 14:26:40 fabiankeil - * - Fix warnings when compiled with glibc. - * - Don't use crumble() for cookie crunching. - * - Move cookie time parsing into parse_header_time(). - * - Let parse_header_time() return a jb_err code - * instead of a pointer that can only be used to - * check for NULL anyway. - * - * Revision 1.94 2007/03/21 12:23:53 fabiankeil - * - Add better protection against malicious gzip headers. - * - Stop logging the first hundred bytes of decompressed content. - * It looks like it's working and there is always debug 16. - * - Log the content size after decompression in decompress_iob() - * instead of pcrs_filter_response(). - * - * Revision 1.93 2007/03/20 15:21:44 fabiankeil - * - Use dedicated header filter actions instead of abusing "filter". - * Replace "filter-client-headers" and "filter-client-headers" - * with "server-header-filter" and "client-header-filter". - * - Remove filter_client_header() and filter_client_header(), - * filter_header() now checks the shiny new - * CSP_FLAG_CLIENT_HEADER_PARSING_DONE flag instead. - * - * Revision 1.92 2007/03/05 13:25:32 fabiankeil - * - Cosmetical changes for LOG_LEVEL_RE_FILTER messages. - * - Handle "Cookie:" and "Connection:" headers a bit smarter - * (don't crunch them just to recreate them later on). - * - Add another non-standard time format for the cookie - * expiration date detection. - * - Fix a valgrind warning. - * - * Revision 1.91 2007/02/24 12:27:32 fabiankeil - * Improve cookie expiration date detection. - * - * Revision 1.90 2007/02/08 19:12:35 fabiankeil - * Don't run server_content_length() the first time - * sed() parses server headers; only adjust the - * Content-Length header if the page was modified. - * - * Revision 1.89 2007/02/07 16:52:11 fabiankeil - * Fix log messages regarding the cookie time format - * (cookie and request URL were mixed up). - * - * Revision 1.88 2007/02/07 11:27:12 fabiankeil - * - Let decompress_iob() - * - not corrupt the content if decompression fails - * early. (the first byte(s) were lost). - * - use pointer arithmetics with defined outcome for - * a change. - * - Use a different kludge to remember a failed decompression. - * - * Revision 1.87 2007/01/31 16:21:38 fabiankeil - * Search for Max-Forwards headers case-insensitive, - * don't generate the "501 unsupported" message for invalid - * Max-Forwards values and don't increase negative ones. - * - * Revision 1.86 2007/01/30 13:05:26 fabiankeil - * - Let server_set_cookie() check the expiration date - * of cookies and don't touch the ones that are already - * expired. Fixes problems with low quality web applications - * as described in BR 932612. - * - * - Adjust comment in client_max_forwards to reality; - * remove invalid Max-Forwards headers. - * - * Revision 1.85 2007/01/26 15:33:46 fabiankeil - * Stop filter_header() from unintentionally removing - * empty header lines that were enlisted by the continue - * hack. - * - * Revision 1.84 2007/01/24 12:56:52 fabiankeil - * - Repeat the request URL before logging any headers. - * Makes reading the log easier in case of simultaneous requests. - * - If there are more than one Content-Type headers in one request, - * use the first one and remove the others. - * - Remove "newval" variable in server_content_type(). - * It's only used once. - * - * Revision 1.83 2007/01/12 15:03:02 fabiankeil - * Correct a cast, check inflateEnd() exit code - * to see if we have to, replace sprintf calls - * with snprintf. - * - * Revision 1.82 2007/01/01 19:36:37 fabiankeil - * Integrate a modified version of Wil Mahan's - * zlib patch (PR #895531). - * - * Revision 1.81 2006/12/31 22:21:33 fabiankeil - * Skip empty filter files in filter_header() - * but don't ignore the ones that come afterwards. - * Fixes BR 1619208, this time for real. - * - * Revision 1.80 2006/12/29 19:08:22 fabiankeil - * Reverted parts of my last commit - * to keep error handling working. - * - * Revision 1.79 2006/12/29 18:04:40 fabiankeil - * Fixed gcc43 conversion warnings. - * - * Revision 1.78 2006/12/26 17:19:20 fabiankeil - * Bringing back the "useless" localtime() call - * I removed in revision 1.67. On some platforms - * it's necessary to prevent time zone offsets. - * - * Revision 1.77 2006/12/07 18:44:26 fabiankeil - * Rebuild request URL in get_destination_from_headers() - * to make sure redirect{pcrs command} works as expected - * for intercepted requests. - * - * Revision 1.76 2006/12/06 19:52:25 fabiankeil - * Added get_destination_from_headers(). - * - * Revision 1.75 2006/11/13 19:05:51 fabiankeil - * Make pthread mutex locking more generic. Instead of - * checking for OSX and OpenBSD, check for FEATURE_PTHREAD - * and use mutex locking unless there is an _r function - * available. Better safe than sorry. - * - * Fixes "./configure --disable-pthread" and should result - * in less threading-related problems on pthread-using platforms, - * but it still doesn't fix BR#1122404. - * - * Revision 1.74 2006/10/02 16:59:12 fabiankeil - * The special header "X-Filter: No" now disables - * header filtering as well. - * - * Revision 1.73 2006/09/23 13:26:38 roro - * Replace TABs by spaces in source code. - * - * Revision 1.72 2006/09/23 12:37:21 fabiankeil - * Don't print a log message every time filter_headers is - * entered or left. It only creates noise without any real - * information. - * - * Revision 1.71 2006/09/21 19:55:17 fabiankeil - * Fix +hide-if-modified-since{-n}. - * - * Revision 1.70 2006/09/08 12:06:34 fabiankeil - * Have hide-if-modified-since interpret the random - * range value as minutes instead of hours. Allows - * more fine-grained configuration. - * - * Revision 1.69 2006/09/06 16:25:51 fabiankeil - * Always have parse_header_time return a pointer - * that actual makes sense, even though we currently - * only need it to detect problems. - * - * Revision 1.68 2006/09/06 10:43:32 fabiankeil - * Added config option enable-remote-http-toggle - * to specify if Privoxy should recognize special - * headers (currently only X-Filter) to change its - * behaviour. Disabled by default. - * - * Revision 1.67 2006/09/04 11:01:26 fabiankeil - * After filtering de-chunked instances, remove - * "Transfer-Encoding" header entirely instead of changing - * it to "Transfer-Encoding: identity", which is invalid. - * Thanks Michael Shields <shields(a)msrl.com>. Fixes PR 1318658. - * - * Don't use localtime in parse_header_time. An empty time struct - * is good enough, it gets overwritten by strptime anyway. - * - * Revision 1.66 2006/09/03 19:38:28 fabiankeil - * Use gmtime_r if available, fallback to gmtime with mutex - * protection for MacOSX and use vanilla gmtime for the rest. - * - * Revision 1.65 2006/08/22 10:55:56 fabiankeil - * Changed client_referrer to use the right type (size_t) for - * hostlenght and to shorten the temporary referrer string with - * '\0' instead of adding a useless line break. - * - * Revision 1.64 2006/08/17 17:15:10 fabiankeil - * - Back to timegm() using GnuPG's replacement if necessary. - * Using mktime() and localtime() could add a on hour offset if - * the randomize factor was big enough to lead to a summer/wintertime - * switch. - * - * - Removed now-useless Privoxy 3.0.3 compatibility glue. - * - * - Moved randomization code into pick_from_range(). - * - * - Changed parse_header_time definition. - * time_t isn't guaranteed to be signed and - * if it isn't, -1 isn't available as error code. - * Changed some variable types in client_if_modified_since() - * because of the same reason. - * - * Revision 1.63 2006/08/14 13:18:08 david__schmidt - * OS/2 compilation compatibility fixups - * - * Revision 1.62 2006/08/14 08:58:42 fabiankeil - * Changed include from strptime.c to strptime.h - * - * Revision 1.61 2006/08/14 08:25:19 fabiankeil - * Split filter-headers{} into filter-client-headers{} - * and filter-server-headers{}. - * Added parse_header_time() to share some code. - * Replaced timegm() with mktime(). - * - * Revision 1.60 2006/08/12 03:54:37 david__schmidt - * Windows service integration - * - * Revision 1.59 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.58 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.56.2.10 2006/01/21 16:16:08 david__schmidt - * Thanks to Edward Carrel for his patch to modernize OSX'spthreads support. See bug #1409623. - * - * Revision 1.56.2.9 2004/10/03 12:53:45 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.56.2.8 2003/07/11 13:21:25 oes - * Excluded text/plain objects from filtering. This fixes a - * couple of client-crashing, download corruption and - * Privoxy performance issues, whose root cause lies in - * web servers labelling content of unknown type as text/plain. - * - * Revision 1.56.2.7 2003/05/06 12:07:26 oes - * Fixed bug #729900: Suspicious HOST: headers are now killed and regenerated if necessary - * - * Revision 1.56.2.6 2003/04/14 21:28:30 oes - * Completing the previous change - * - * Revision 1.56.2.5 2003/04/14 12:08:16 oes - * Added temporary workaround for bug in PHP < 4.2.3 - * - * Revision 1.56.2.4 2003/03/07 03:41:05 david__schmidt - * Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX. Hopefully this will take care of all of those pesky crash reports. - * - * Revision 1.56.2.3 2002/11/10 04:20:02 hal9 - * Fix typo: supressed -> suppressed - * - * Revision 1.56.2.2 2002/09/25 14:59:53 oes - * Improved cookie logging - * - * Revision 1.56.2.1 2002/09/25 14:52:45 oes - * Added basic support for OPTIONS and TRACE HTTP methods: - * - New parser function client_max_forwards which decrements - * the Max-Forwards HTTP header field of OPTIONS and TRACE - * requests by one before forwarding - * - New parser function client_host which extracts the host - * and port information from the HTTP header field if the - * request URI was not absolute - * - Don't crumble and re-add the Host: header, but only generate - * and append if missing - * - * Revision 1.56 2002/05/12 15:34:22 jongfoster - * Fixing typo in a comment - * - * Revision 1.55 2002/05/08 16:01:07 oes - * Optimized add_to_iob: - * - Use realloc instead of malloc(), memcpy(), free() - * - Expand to powers of two if possible, to get - * O(log n) reallocs instead of O(n). - * - Moved check for buffer limit here from chat - * - Report failure via returncode - * - * Revision 1.54 2002/04/02 15:03:16 oes - * Tiny code cosmetics - * - * Revision 1.53 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.52 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.51 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.50 2002/03/12 01:45:35 oes - * More verbose logging - * - * Revision 1.49 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.48 2002/03/07 03:46:53 oes - * Fixed compiler warnings etc - * - * Revision 1.47 2002/02/20 23:15:13 jongfoster - * Parsing functions now handle out-of-memory gracefully by returning - * an error code. - * - * Revision 1.46 2002/01/17 21:03:47 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Revision 1.45 2002/01/09 14:33:03 oes - * Added support for localtime_r. - * - * Revision 1.44 2001/12/14 01:22:54 steudten - * Remove 'user:pass@' from 'proto://user:pass@host' for the - * new added header 'Host: ..'. (See Req ID 491818) - * - * Revision 1.43 2001/11/23 00:26:38 jongfoster - * Fixing two really stupid errors in my previous commit - * - * Revision 1.42 2001/11/22 21:59:30 jongfoster - * Adding code to handle +no-cookies-keep - * - * Revision 1.41 2001/11/05 23:43:05 steudten - * Add time+date to log files. - * - * Revision 1.40 2001/10/26 20:13:09 jongfoster - * ctype.h is needed in Windows, too. - * - * Revision 1.39 2001/10/26 17:40:04 oes - * Introduced get_header_value() - * Removed http->user_agent, csp->referrer and csp->accept_types - * Removed client_accept() - * - * Revision 1.38 2001/10/25 03:40:48 david__schmidt - * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple - * threads to call select() simultaneously. So, it's time to do a real, live, - * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__ - * (native). Both versions will work, but using __OS2__ offers multi-threading. - * - * Revision 1.37 2001/10/23 21:36:02 jongfoster - * Documenting sed()'s error behaviou (doc change only) - * - * Revision 1.36 2001/10/13 12:51:51 joergs - * Removed client_host, (was only required for the old 2.0.2-11 http://noijb. - * force-load), instead crumble Host: and add it (again) in client_host_adder - * (in case we get a HTTP/1.0 request without Host: header and forward it to - * a HTTP/1.1 server/proxy). - * - * Revision 1.35 2001/10/09 22:39:21 jongfoster - * assert.h is also required under Win32, so moving out of #ifndef _WIN32 - * block. - * - * Revision 1.34 2001/10/07 18:50:55 oes - * Added server_content_encoding, renamed server_transfer_encoding - * - * Revision 1.33 2001/10/07 18:04:49 oes - * Changed server_http11 to server_http and its pattern to "HTTP". - * Additional functionality: it now saves the HTTP status into - * csp->http->status and sets CT_TABOO for Status 206 (partial range) - * - * Revision 1.32 2001/10/07 15:43:28 oes - * Removed FEATURE_DENY_GZIP and replaced it with client_accept_encoding, - * client_te and client_accept_encoding_adder, triggered by the new - * +no-compression action. For HTTP/1.1 the Accept-Encoding header is - * changed to allow only identity and chunked, and the TE header is - * crunched. For HTTP/1.0, Accept-Encoding is crunched. - * - * parse_http_request no longer does anything than parsing. The rewriting - * of http->cmd and version mangling are gone. It now also recognizes - * the put and delete methods and saves the url in http->url. Removed - * unused variable. - * - * renamed content_type and content_length to have the server_ prefix - * - * server_content_type now only works if csp->content_type != CT_TABOO - * - * added server_transfer_encoding, which - * - Sets CT_TABOO to prohibit filtering if encoding compresses - * - Raises the CSP_FLAG_CHUNKED flag if Encoding is "chunked" - * - Change from "chunked" to "identity" if body was chunked - * but has been de-chunked for filtering. - * - * added server_content_md5 which crunches any Content-MD5 headers - * if the body was modified. - * - * made server_http11 conditional on +downgrade action - * - * Replaced 6 boolean members of csp with one bitmap (csp->flags) - * - * Revision 1.31 2001/10/05 14:25:02 oes - * Crumble Keep-Alive from Server - * - * Revision 1.30 2001/09/29 12:56:03 joergs - * IJB now changes HTTP/1.1 to HTTP/1.0 in requests and answers. - * - * Revision 1.29 2001/09/24 21:09:24 jongfoster - * Fixing 2 memory leaks that Guy spotted, where the paramater to - * enlist() was not being free()d. - * - * Revision 1.28 2001/09/22 16:32:28 jongfoster - * Removing unused #includes. - * - * Revision 1.27 2001/09/20 15:45:25 steudten - * - * add casting from size_t to int for printf() - * remove local variable shadow s2 - * - * Revision 1.26 2001/09/16 17:05:14 jongfoster - * Removing unused #include showarg.h - * - * Revision 1.25 2001/09/16 13:21:27 jongfoster - * Changes to use new list functions. - * - * Revision 1.24 2001/09/13 23:05:50 jongfoster - * Changing the string paramater to the header parsers a "const". - * - * Revision 1.23 2001/09/12 18:08:19 steudten - * - * In parse_http_request() header rewriting miss the host value, so - * from http://www.mydomain.com the result was just " / " not - * http://www.mydomain.com/ in case we forward. - * - * Revision 1.22 2001/09/10 10:58:53 oes - * Silenced compiler warnings - * - * Revision 1.21 2001/07/31 14:46:00 oes - * - Persistant connections now suppressed - * - sed() no longer appends empty header to csp->headers - * - * Revision 1.20 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.19 2001/07/25 17:21:54 oes - * client_uagent now saves copy of User-Agent: header value - * - * Revision 1.18 2001/07/13 14:02:46 oes - * - Included fix to repair broken HTTP requests that - * don't contain a path, not even '/'. - * - Removed all #ifdef PCRS - * - content_type now always inspected and classified as - * text, gif or other. - * - formatting / comments - * - * Revision 1.17 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.16 2001/06/29 13:32:42 oes - * - Fixed a comment - * - Adapted free_http_request - * - Removed logentry from cancelled commit - * - * Revision 1.15 2001/06/03 19:12:38 oes - * deleted const struct interceptors - * - * Revision 1.14 2001/06/01 18:49:17 jongfoster - * Replaced "list_share" with "list" - the tiny memory gain was not - * worth the extra complexity. - * - * Revision 1.13 2001/05/31 21:30:33 jongfoster - * Removed list code - it's now in list.[ch] - * Renamed "permission" to "action", and changed many features - * to use the actions file rather than the global config. - * - * Revision 1.12 2001/05/31 17:33:13 oes - * - * CRLF -> LF - * - * Revision 1.11 2001/05/29 20:11:19 joergs - * '/ * inside comment' warning removed. - * - * Revision 1.10 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.9 2001/05/28 17:26:33 jongfoster - * Fixing segfault if last header was crunched. - * Fixing Windows build (snprintf() is _snprintf() under Win32, but we - * can use the cross-platform sprintf() instead.) - * - * Revision 1.8 2001/05/27 22:17:04 oes - * - * - re_process_buffer no longer writes the modified buffer - * to the client, which was very ugly. It now returns the - * buffer, which it is then written by chat. - * - * - content_length now adjusts the Content-Length: header - * for modified documents rather than crunch()ing it. - * (Length info in csp->content_length, which is 0 for - * unmodified documents) - * - * - For this to work, sed() is called twice when filtering. - * - * Revision 1.7 2001/05/27 13:19:06 oes - * Patched Joergs solution for the content-length in. - * - * Revision 1.6 2001/05/26 13:39:32 jongfoster - * Only crunches Content-Length header if applying RE filtering. - * Without this fix, Microsoft Windows Update wouldn't work. - * - * Revision 1.5 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.4 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.3 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.2 2001/05/17 23:02:36 oes - * - Made referrer option accept 'L' as a substitute for '§' - * - * Revision 1.1.1.1 2001/05/15 13:59:01 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#ifndef _WIN32 -#include <stdio.h> -#include <sys/types.h> -#endif - -#include <stdlib.h> -#include <ctype.h> -#include <assert.h> -#include <string.h> - -#ifdef __GLIBC__ -/* - * Convince GNU's libc to provide a strptime prototype. - */ -#define __USE_XOPEN -#endif /*__GLIBC__ */ -#include <time.h> - -#ifdef FEATURE_ZLIB -#include <zlib.h> -#endif - -#if !defined(_WIN32) && !defined(__OS2__) -#include <unistd.h> -#endif - -#include "project.h" - -#ifdef FEATURE_PTHREAD -#include "jcc.h" -/* jcc.h is for mutex semapores only */ -#endif /* def FEATURE_PTHREAD */ -#include "list.h" -#include "parsers.h" -#include "ssplit.h" -#include "errlog.h" -#include "jbsockets.h" -#include "miscutil.h" -#include "list.h" -#include "actions.h" -#include "filters.h" - -#ifndef HAVE_STRPTIME -#include "strptime.h" -#endif - -const char parsers_h_rcs[] = PARSERS_H_VERSION; - -/* Fix a problem with Solaris. There should be no effect on other - * platforms. - * Solaris's isspace() is a macro which uses its argument directly - * as an array index. Therefore we need to make sure that high-bit - * characters generate +ve values, and ideally we also want to make - * the argument match the declared parameter type of "int". - * - * Why did they write a character function that can't take a simple - * "char" argument? Doh! - */ -#define ijb_isupper(__X) isupper((int)(unsigned char)(__X)) -#define ijb_tolower(__X) tolower((int)(unsigned char)(__X)) - -static char *get_header_line(struct iob *iob); -static jb_err scan_headers(struct client_state *csp); -static jb_err header_tagger(struct client_state *csp, char *header); -static jb_err parse_header_time(const char *header_time, time_t *result); - -static jb_err crumble (struct client_state *csp, char **header); -static jb_err filter_header (struct client_state *csp, char **header); -static jb_err client_connection (struct client_state *csp, char **header); -static jb_err client_referrer (struct client_state *csp, char **header); -static jb_err client_uagent (struct client_state *csp, char **header); -static jb_err client_ua (struct client_state *csp, char **header); -static jb_err client_from (struct client_state *csp, char **header); -static jb_err client_send_cookie (struct client_state *csp, char **header); -static jb_err client_x_forwarded (struct client_state *csp, char **header); -static jb_err client_accept_encoding (struct client_state *csp, char **header); -static jb_err client_te (struct client_state *csp, char **header); -static jb_err client_max_forwards (struct client_state *csp, char **header); -static jb_err client_host (struct client_state *csp, char **header); -static jb_err client_if_modified_since (struct client_state *csp, char **header); -static jb_err client_accept_language (struct client_state *csp, char **header); -static jb_err client_if_none_match (struct client_state *csp, char **header); -static jb_err crunch_client_header (struct client_state *csp, char **header); -static jb_err client_x_filter (struct client_state *csp, char **header); -static jb_err client_range (struct client_state *csp, char **header); -static jb_err server_set_cookie (struct client_state *csp, char **header); -static jb_err server_connection (struct client_state *csp, char **header); -static jb_err server_content_type (struct client_state *csp, char **header); -static jb_err server_adjust_content_length(struct client_state *csp, char **header); -static jb_err server_content_md5 (struct client_state *csp, char **header); -static jb_err server_content_encoding (struct client_state *csp, char **header); -static jb_err server_transfer_coding (struct client_state *csp, char **header); -static jb_err server_http (struct client_state *csp, char **header); -static jb_err crunch_server_header (struct client_state *csp, char **header); -static jb_err server_last_modified (struct client_state *csp, char **header); -static jb_err server_content_disposition(struct client_state *csp, char **header); - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE -static jb_err server_save_content_length(struct client_state *csp, char **header); -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - -static jb_err client_host_adder (struct client_state *csp); -static jb_err client_xtra_adder (struct client_state *csp); -static jb_err client_x_forwarded_for_adder(struct client_state *csp); -static jb_err client_connection_header_adder(struct client_state *csp); -static jb_err server_connection_close_adder(struct client_state *csp); - -static jb_err create_forged_referrer(char **header, const char *hostport); -static jb_err create_fake_referrer(char **header, const char *fake_referrer); -static jb_err handle_conditional_hide_referrer_parameter(char **header, - const char *host, const int parameter_conditional_block); -static const char *get_appropiate_connection_header(const struct client_state *csp); - -/* - * List of functions to run on a list of headers. - */ -struct parsers -{ - /** The header prefix to match */ - const char *str; - - /** The length of the prefix to match */ - const size_t len; - - /** The function to apply to this line */ - const parser_func_ptr parser; -}; - -static const struct parsers client_patterns[] = { - { "referer:", 8, client_referrer }, - { "user-agent:", 11, client_uagent }, - { "ua-", 3, client_ua }, - { "from:", 5, client_from }, - { "cookie:", 7, client_send_cookie }, - { "x-forwarded-for:", 16, client_x_forwarded }, - { "Accept-Encoding:", 16, client_accept_encoding }, - { "TE:", 3, client_te }, - { "Host:", 5, client_host }, - { "if-modified-since:", 18, client_if_modified_since }, - { "Keep-Alive:", 11, crumble }, - { "connection:", 11, client_connection }, - { "proxy-connection:", 17, crumble }, - { "max-forwards:", 13, client_max_forwards }, - { "Accept-Language:", 16, client_accept_language }, - { "if-none-match:", 14, client_if_none_match }, - { "Range:", 6, client_range }, - { "Request-Range:", 14, client_range }, - { "If-Range:", 9, client_range }, - { "X-Filter:", 9, client_x_filter }, - { "*", 0, crunch_client_header }, - { "*", 0, filter_header }, - { NULL, 0, NULL } -}; - -static const struct parsers server_patterns[] = { - { "HTTP/", 5, server_http }, - { "set-cookie:", 11, server_set_cookie }, - { "connection:", 11, server_connection }, - { "Content-Type:", 13, server_content_type }, - { "Content-MD5:", 12, server_content_md5 }, - { "Content-Encoding:", 17, server_content_encoding }, -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - { "Content-Length:", 15, server_save_content_length }, -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - { "Transfer-Encoding:", 18, server_transfer_coding }, - { "Keep-Alive:", 11, crumble }, - { "content-disposition:", 20, server_content_disposition }, - { "Last-Modified:", 14, server_last_modified }, - { "*", 0, crunch_server_header }, - { "*", 0, filter_header }, - { NULL, 0, NULL } -}; - -static const add_header_func_ptr add_client_headers[] = { - client_host_adder, - client_x_forwarded_for_adder, - client_xtra_adder, - /* Temporarily disabled: client_accept_encoding_adder, */ - client_connection_header_adder, - NULL -}; - -static const add_header_func_ptr add_server_headers[] = { - server_connection_close_adder, - NULL -}; - -/********************************************************************* - * - * Function : flush_socket - * - * Description : Write any pending "buffered" content. - * - * Parameters : - * 1 : fd = file descriptor of the socket to read - * 2 : iob = The I/O buffer to flush, usually csp->iob. - * - * Returns : On success, the number of bytes written are returned (zero - * indicates nothing was written). On error, -1 is returned, - * and errno is set appropriately. If count is zero and the - * file descriptor refers to a regular file, 0 will be - * returned without causing any other effect. For a special - * file, the results are not portable. - * - *********************************************************************/ -long flush_socket(jb_socket fd, struct iob *iob) -{ - long len = iob->eod - iob->cur; - - if (len <= 0) - { - return(0); - } - - if (write_socket(fd, iob->cur, (size_t)len)) - { - return(-1); - } - iob->eod = iob->cur = iob->buf; - return(len); - -} - - -/********************************************************************* - * - * Function : add_to_iob - * - * Description : Add content to the buffered page, expanding the - * buffer if necessary. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : buf = holds the content to be added to the page - * 3 : n = number of bytes to be added - * - * Returns : JB_ERR_OK on success, JB_ERR_MEMORY if out-of-memory - * or buffer limit reached. - * - *********************************************************************/ -jb_err add_to_iob(struct client_state *csp, char *buf, long n) -{ - struct iob *iob = csp->iob; - size_t used, offset, need, want; - char *p; - - if (n <= 0) return JB_ERR_OK; - - used = (size_t)(iob->eod - iob->buf); - offset = (size_t)(iob->cur - iob->buf); - need = used + (size_t)n + 1; - - /* - * If the buffer can't hold the new data, extend it first. - * Use the next power of two if possible, else use the actual need. - */ - if (need > csp->config->buffer_limit) - { - log_error(LOG_LEVEL_INFO, - "Buffer limit reached while extending the buffer (iob). Needed: %d. Limit: %d", - need, csp->config->buffer_limit); - return JB_ERR_MEMORY; - } - - if (need > iob->size) - { - for (want = csp->iob->size ? csp->iob->size : 512; want <= need;) want *= 2; - - if (want <= csp->config->buffer_limit && NULL != (p = (char *)realloc(iob->buf, want))) - { - iob->size = want; - } - else if (NULL != (p = (char *)realloc(iob->buf, need))) - { - iob->size = need; - } - else - { - log_error(LOG_LEVEL_ERROR, "Extending the buffer (iob) failed: %E"); - return JB_ERR_MEMORY; - } - - /* Update the iob pointers */ - iob->cur = p + offset; - iob->eod = p + used; - iob->buf = p; - } - - /* copy the new data into the iob buffer */ - memcpy(iob->eod, buf, (size_t)n); - - /* point to the end of the data */ - iob->eod += n; - - /* null terminate == cheap insurance */ - *iob->eod = '\0'; - - return JB_ERR_OK; - -} - - -#ifdef FEATURE_ZLIB -/********************************************************************* - * - * Function : decompress_iob - * - * Description : Decompress buffered page, expanding the - * buffer as necessary. csp->iob->cur - * should point to the the beginning of the - * compressed data block. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK on success, - * JB_ERR_MEMORY if out-of-memory limit reached, and - * JB_ERR_COMPRESS if error decompressing buffer. - * - *********************************************************************/ -jb_err decompress_iob(struct client_state *csp) -{ - char *buf; /* new, uncompressed buffer */ - char *cur; /* Current iob position (to keep the original - * iob->cur unmodified if we return early) */ - size_t bufsize; /* allocated size of the new buffer */ - size_t old_size; /* Content size before decompression */ - size_t skip_size; /* Number of bytes at the beginning of the iob - that we should NOT decompress. */ - int status; /* return status of the inflate() call */ - z_stream zstr; /* used by calls to zlib */ - - assert(csp->iob->cur - csp->iob->buf > 0); - assert(csp->iob->eod - csp->iob->cur > 0); - - bufsize = csp->iob->size; - skip_size = (size_t)(csp->iob->cur - csp->iob->buf); - old_size = (size_t)(csp->iob->eod - csp->iob->cur); - - cur = csp->iob->cur; - - if (bufsize < (size_t)10) - { - /* - * This is to protect the parsing of gzipped data, - * but it should(?) be valid for deflated data also. - */ - log_error(LOG_LEVEL_ERROR, "Buffer too small decompressing iob"); - return JB_ERR_COMPRESS; - } - - if (csp->content_type & CT_GZIP) - { - /* - * Our task is slightly complicated by the facts that data - * compressed by gzip does not include a zlib header, and - * that there is no easily accessible interface in zlib to - * handle a gzip header. We strip off the gzip header by - * hand, and later inform zlib not to expect a header. - */ - - /* - * Strip off the gzip header. Please see RFC 1952 for more - * explanation of the appropriate fields. - */ - if ((*cur++ != (char)0x1f) - || (*cur++ != (char)0x8b) - || (*cur++ != Z_DEFLATED)) - { - log_error(LOG_LEVEL_ERROR, "Invalid gzip header when decompressing"); - return JB_ERR_COMPRESS; - } - else - { - int flags = *cur++; - /* - * XXX: These magic numbers should be replaced - * with macros to give a better idea what they do. - */ - if (flags & 0xe0) - { - /* The gzip header has reserved bits set; bail out. */ - log_error(LOG_LEVEL_ERROR, "Invalid gzip header flags when decompressing"); - return JB_ERR_COMPRESS; - } - cur += 6; - - /* Skip extra fields if necessary. */ - if (flags & 0x04) - { - /* - * Skip a given number of bytes, specified - * as a 16-bit little-endian value. - */ - /* - * XXX: This code used to be: - * - * csp->iob->cur += *csp->iob->cur++ + (*csp->iob->cur++ << 8); - * - * which I had to change into: - * - * cur += *cur++ + (*cur++ << 8); - * - * at which point gcc43 finally noticed that the value - * of cur is undefined (it depends on which of the - * summands is evaluated first). - * - * I haven't come across a site where this - * code is actually executed yet, but I hope - * it works anyway. - */ - int skip_bytes; - skip_bytes = *cur++; - skip_bytes = *cur++ << 8; - - assert(skip_bytes == *csp->iob->cur - 2 + ((*csp->iob->cur - 1) << 8)); - - /* - * The number of bytes to skip should be positive - * and we'd like to stay in the buffer. - */ - if ((skip_bytes < 0) || (skip_bytes >= (csp->iob->eod - cur))) - { - log_error(LOG_LEVEL_ERROR, - "Unreasonable amount of bytes to skip (%d). Stopping decompression", - skip_bytes); - return JB_ERR_COMPRESS; - } - log_error(LOG_LEVEL_INFO, - "Skipping %d bytes for gzip compression. Does this sound right?", - skip_bytes); - cur += skip_bytes; - } - - /* Skip the filename if necessary. */ - if (flags & 0x08) - { - /* A null-terminated string is supposed to follow. */ - while (*cur++ && (cur < csp->iob->eod)); - - } - - /* Skip the comment if necessary. */ - if (flags & 0x10) - { - /* A null-terminated string is supposed to follow. */ - while (*cur++ && (cur < csp->iob->eod)); - } - - /* Skip the CRC if necessary. */ - if (flags & 0x02) - { - cur += 2; - } - - if (cur >= csp->iob->eod) - { - /* - * If the current position pointer reached or passed - * the buffer end, we were obviously tricked to skip - * too much. - */ - log_error(LOG_LEVEL_ERROR, - "Malformed gzip header detected. Aborting decompression."); - return JB_ERR_COMPRESS; - } - } - } - else if (csp->content_type & CT_DEFLATE) - { - /* - * XXX: The debug level should be lowered - * before the next stable release. - */ - log_error(LOG_LEVEL_INFO, "Decompressing deflated iob: %d", *cur); - /* - * In theory (that is, according to RFC 1950), deflate-compressed - * data should begin with a two-byte zlib header and have an - * adler32 checksum at the end. It seems that in practice only - * the raw compressed data is sent. Note that this means that - * we are not RFC 1950-compliant here, but the advantage is that - * this actually works. :) - * - * We add a dummy null byte to tell zlib where the data ends, - * and later inform it not to expect a header. - * - * Fortunately, add_to_iob() has thoughtfully null-terminated - * the buffer; we can just increment the end pointer to include - * the dummy byte. - */ - csp->iob->eod++; - } - else - { - log_error(LOG_LEVEL_ERROR, - "Unable to determine compression format for decompression"); - return JB_ERR_COMPRESS; - } - - /* Set up the fields required by zlib. */ - zstr.next_in = (Bytef *)cur; - zstr.avail_in = (unsigned int)(csp->iob->eod - cur); - zstr.zalloc = Z_NULL; - zstr.zfree = Z_NULL; - zstr.opaque = Z_NULL; - - /* - * Passing -MAX_WBITS to inflateInit2 tells the library - * that there is no zlib header. - */ - if (inflateInit2 (&zstr, -MAX_WBITS) != Z_OK) - { - log_error(LOG_LEVEL_ERROR, "Error initializing decompression"); - return JB_ERR_COMPRESS; - } - - /* - * Next, we allocate new storage for the inflated data. - * We don't modify the existing iob yet, so in case there - * is error in decompression we can recover gracefully. - */ - buf = zalloc(bufsize); - if (NULL == buf) - { - log_error(LOG_LEVEL_ERROR, "Out of memory decompressing iob"); - return JB_ERR_MEMORY; - } - - assert(bufsize >= skip_size); - memcpy(buf, csp->iob->buf, skip_size); - zstr.avail_out = bufsize - skip_size; - zstr.next_out = (Bytef *)buf + skip_size; - - /* Try to decompress the whole stream in one shot. */ - while (Z_BUF_ERROR == (status = inflate(&zstr, Z_FINISH))) - { - /* We need to allocate more memory for the output buffer. */ - - char *tmpbuf; /* used for realloc'ing the buffer */ - size_t oldbufsize = bufsize; /* keep track of the old bufsize */ - - /* - * If zlib wants more data then there's a problem, because - * the complete compressed file should have been buffered. - */ - if (0 == zstr.avail_in) - { - log_error(LOG_LEVEL_ERROR, "Unexpected end of compressed iob"); - return JB_ERR_COMPRESS; - } - - /* - * If we tried the limit and still didn't have enough - * memory, just give up. - */ - if (bufsize == csp->config->buffer_limit) - { - log_error(LOG_LEVEL_ERROR, "Buffer limit reached while decompressing iob"); - return JB_ERR_MEMORY; - } - - /* Try doubling the buffer size each time. */ - bufsize *= 2; - - /* Don't exceed the buffer limit. */ - if (bufsize > csp->config->buffer_limit) - { - bufsize = csp->config->buffer_limit; - } - - /* Try to allocate the new buffer. */ - tmpbuf = realloc(buf, bufsize); - if (NULL == tmpbuf) - { - log_error(LOG_LEVEL_ERROR, "Out of memory decompressing iob"); - freez(buf); - return JB_ERR_MEMORY; - } - else - { - char *oldnext_out = (char *)zstr.next_out; - - /* - * Update the fields for inflate() to use the new - * buffer, which may be in a location different from - * the old one. - */ - zstr.avail_out += bufsize - oldbufsize; - zstr.next_out = (Bytef *)tmpbuf + bufsize - zstr.avail_out; - - /* - * Compare with an uglier method of calculating these values - * that doesn't require the extra oldbufsize variable. - */ - assert(zstr.avail_out == tmpbuf + bufsize - (char *)zstr.next_out); - assert((char *)zstr.next_out == tmpbuf + ((char *)oldnext_out - buf)); - assert(zstr.avail_out > 0U); - - buf = tmpbuf; - } - } - - if (Z_STREAM_ERROR == inflateEnd(&zstr)) - { - log_error(LOG_LEVEL_ERROR, - "Inconsistent stream state after decompression: %s", zstr.msg); - /* - * XXX: Intentionally no return. - * - * According to zlib.h, Z_STREAM_ERROR is returned - * "if the stream state was inconsistent". - * - * I assume in this case inflate()'s status - * would also be something different than Z_STREAM_END - * so this check should be redundant, but lets see. - */ - } - - if (status != Z_STREAM_END) - { - /* We failed to decompress the stream. */ - log_error(LOG_LEVEL_ERROR, - "Error in decompressing to the buffer (iob): %s", zstr.msg); - return JB_ERR_COMPRESS; - } - - /* - * Finally, we can actually update the iob, since the - * decompression was successful. First, free the old - * buffer. - */ - freez(csp->iob->buf); - - /* Now, update the iob to use the new buffer. */ - csp->iob->buf = buf; - csp->iob->cur = csp->iob->buf + skip_size; - csp->iob->eod = (char *)zstr.next_out; - csp->iob->size = bufsize; - - /* - * Make sure the new uncompressed iob obeys some minimal - * consistency conditions. - */ - if ((csp->iob->buf < csp->iob->cur) - && (csp->iob->cur <= csp->iob->eod) - && (csp->iob->eod <= csp->iob->buf + csp->iob->size)) - { - const size_t new_size = (size_t)(csp->iob->eod - csp->iob->cur); - if (new_size > (size_t)0) - { - log_error(LOG_LEVEL_RE_FILTER, - "Decompression successful. Old size: %d, new size: %d.", - old_size, new_size); - } - else - { - /* zlib thinks this is OK, so lets do the same. */ - log_error(LOG_LEVEL_INFO, "Decompression didn't result in any content."); - } - } - else - { - /* It seems that zlib did something weird. */ - log_error(LOG_LEVEL_ERROR, - "Unexpected error decompressing the buffer (iob): %d==%d, %d>%d, %d<%d", - csp->iob->cur, csp->iob->buf + skip_size, csp->iob->eod, csp->iob->buf, - csp->iob->eod, csp->iob->buf + csp->iob->size); - return JB_ERR_COMPRESS; - } - - return JB_ERR_OK; - -} -#endif /* defined(FEATURE_ZLIB) */ - - -/********************************************************************* - * - * Function : string_move - * - * Description : memmove wrapper to move the last part of a string - * towards the beginning, overwriting the part in - * the middle. strlcpy() can't be used here as the - * strings overlap. - * - * Parameters : - * 1 : dst = Destination to overwrite - * 2 : src = Source to move. - * - * Returns : N/A - * - *********************************************************************/ -static void string_move(char *dst, char *src) -{ - assert(dst < src); - - /* +1 to copy the terminating nul as well. */ - memmove(dst, src, strlen(src)+1); -} - - -/********************************************************************* - * - * Function : normalize_lws - * - * Description : Reduces unquoted linear white space in headers - * to a single space in accordance with RFC 2616 2.2. - * This simplifies parsing and filtering later on. - * - * XXX: Remove log messages before - * the next stable release? - * - * Parameters : - * 1 : header = A header with linear white space to reduce. - * - * Returns : N/A - * - *********************************************************************/ -static void normalize_lws(char *header) -{ - char *p = header; - - while (*p != '\0') - { - if (ijb_isspace(*p) && ijb_isspace(*(p+1))) - { - char *q = p+1; - - while (ijb_isspace(*q)) - { - q++; - } - log_error(LOG_LEVEL_HEADER, "Reducing white space in '%s'", header); - string_move(p+1, q); - } - - if (*p == '\t') - { - log_error(LOG_LEVEL_HEADER, - "Converting tab to space in '%s'", header); - *p = ' '; - } - else if (*p == '"') - { - char *end_of_token = strstr(p+1, "\""); - - if (NULL != end_of_token) - { - /* Don't mess with quoted text. */ - p = end_of_token; - } - else - { - log_error(LOG_LEVEL_HEADER, - "Ignoring single quote in '%s'", header); - } - } - p++; - } - - p = strchr(header, ':'); - if ((p != NULL) && (p != header) && ijb_isspace(*(p-1))) - { - /* - * There's still space before the colon. - * We don't want it. - */ - string_move(p-1, p); - } -} - - -/********************************************************************* - * - * Function : get_header - * - * Description : This (odd) routine will parse the csp->iob - * to get the next complete header. - * - * Parameters : - * 1 : iob = The I/O buffer to parse, usually csp->iob. - * - * Returns : Any one of the following: - * - * 1) a pointer to a dynamically allocated string that contains a header line - * 2) NULL indicating that the end of the header was reached - * 3) "" indicating that the end of the iob was reached before finding - * a complete header line. - * - *********************************************************************/ -char *get_header(struct iob *iob) -{ - char *header; - - header = get_header_line(iob); - - if ((header == NULL) || (*header == '\0')) - { - /* - * No complete header read yet, tell the client. - */ - return header; - } - - while ((iob->cur[0] == ' ') || (iob->cur[0] == '\t')) - { - /* - * Header spans multiple lines, append the next one. - */ - char *continued_header; - - continued_header = get_header_line(iob); - if ((continued_header == NULL) || (*continued_header == '\0')) - { - /* - * No complete header read yet, return what we got. - * XXX: Should "unread" header instead. - */ - log_error(LOG_LEVEL_INFO, - "Failed to read a multi-line header properly: '%s'", - header); - break; - } - - if (JB_ERR_OK != string_join(&header, continued_header)) - { - log_error(LOG_LEVEL_FATAL, - "Out of memory while appending multiple headers."); - } - else - { - /* XXX: remove before next stable release. */ - log_error(LOG_LEVEL_HEADER, - "Merged multiple header lines to: '%s'", - header); - } - } - - normalize_lws(header); - - return header; - -} - - -/********************************************************************* - * - * Function : get_header_line - * - * Description : This (odd) routine will parse the csp->iob - * to get the next header line. - * - * Parameters : - * 1 : iob = The I/O buffer to parse, usually csp->iob. - * - * Returns : Any one of the following: - * - * 1) a pointer to a dynamically allocated string that contains a header line - * 2) NULL indicating that the end of the header was reached - * 3) "" indicating that the end of the iob was reached before finding - * a complete header line. - * - *********************************************************************/ -static char *get_header_line(struct iob *iob) -{ - char *p, *q, *ret; - - if ((iob->cur == NULL) - || ((p = strchr(iob->cur, '\n')) == NULL)) - { - return(""); /* couldn't find a complete header */ - } - - *p = '\0'; - - ret = strdup(iob->cur); - if (ret == NULL) - { - /* FIXME No way to handle error properly */ - log_error(LOG_LEVEL_FATAL, "Out of memory in get_header_line()"); - } - assert(ret != NULL); - - iob->cur = p+1; - - if ((q = strchr(ret, '\r')) != NULL) *q = '\0'; - - /* is this a blank line (i.e. the end of the header) ? */ - if (*ret == '\0') - { - freez(ret); - return NULL; - } - - return ret; - -} - - -/********************************************************************* - * - * Function : get_header_value - * - * Description : Get the value of a given header from a chained list - * of header lines or return NULL if no such header is - * present in the list. - * - * Parameters : - * 1 : header_list = pointer to list - * 2 : header_name = string with name of header to look for. - * Trailing colon required, capitalization - * doesn't matter. - * - * Returns : NULL if not found, else value of header - * - *********************************************************************/ -char *get_header_value(const struct list *header_list, const char *header_name) -{ - struct list_entry *cur_entry; - char *ret = NULL; - size_t length = 0; - - assert(header_list); - assert(header_name); - length = strlen(header_name); - - for (cur_entry = header_list->first; cur_entry ; cur_entry = cur_entry->next) - { - if (cur_entry->str) - { - if (!strncmpic(cur_entry->str, header_name, length)) - { - /* - * Found: return pointer to start of value - */ - ret = cur_entry->str + length; - while (*ret && ijb_isspace(*ret)) ret++; - return ret; - } - } - } - - /* - * Not found - */ - return NULL; - -} - - -/********************************************************************* - * - * Function : scan_headers - * - * Description : Scans headers, applies tags and updates action bits. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK - * - *********************************************************************/ -static jb_err scan_headers(struct client_state *csp) -{ - struct list_entry *h; /* Header */ - jb_err err = JB_ERR_OK; - - for (h = csp->headers->first; (err == JB_ERR_OK) && (h != NULL) ; h = h->next) - { - /* Header crunch()ed in previous run? -> ignore */ - if (h->str == NULL) continue; - log_error(LOG_LEVEL_HEADER, "scan: %s", h->str); - err = header_tagger(csp, h->str); - } - - return err; -} - - -/********************************************************************* - * - * Function : sed - * - * Description : add, delete or modify lines in the HTTP header streams. - * On entry, it receives a linked list of headers space - * that was allocated dynamically (both the list nodes - * and the header contents). - * - * As a side effect it frees the space used by the original - * header lines. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : filter_server_headers = Boolean to switch between - * server and header filtering. - * - * Returns : JB_ERR_OK in case off success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err sed(struct client_state *csp, int filter_server_headers) -{ - /* XXX: use more descriptive names. */ - struct list_entry *p; - const struct parsers *v; - const add_header_func_ptr *f; - jb_err err = JB_ERR_OK; - - if (filter_server_headers) - { - v = server_patterns; - f = add_server_headers; - } - else - { - v = client_patterns; - f = add_client_headers; - } - - scan_headers(csp); - - while ((err == JB_ERR_OK) && (v->str != NULL)) - { - for (p = csp->headers->first; (err == JB_ERR_OK) && (p != NULL); p = p->next) - { - /* Header crunch()ed in previous run? -> ignore */ - if (p->str == NULL) continue; - - /* Does the current parser handle this header? */ - if ((strncmpic(p->str, v->str, v->len) == 0) || - (v->len == CHECK_EVERY_HEADER_REMAINING)) - { - err = v->parser(csp, &(p->str)); - } - } - v++; - } - - /* place additional headers on the csp->headers list */ - while ((err == JB_ERR_OK) && (*f)) - { - err = (*f)(csp); - f++; - } - - return err; -} - - -/********************************************************************* - * - * Function : update_server_headers - * - * Description : Updates server headers after the body has been modified. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK in case off success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err update_server_headers(struct client_state *csp) -{ - jb_err err = JB_ERR_OK; - - static const struct parsers server_patterns_light[] = { - { "Content-Length:", 15, server_adjust_content_length }, - { "Transfer-Encoding:", 18, server_transfer_coding }, -#ifdef FEATURE_ZLIB - { "Content-Encoding:", 17, server_content_encoding }, -#endif /* def FEATURE_ZLIB */ - { NULL, 0, NULL } - }; - - if (strncmpic(csp->http->cmd, "HEAD", 4)) - { - const struct parsers *v; - struct list_entry *p; - - for (v = server_patterns_light; (err == JB_ERR_OK) && (v->str != NULL); v++) - { - for (p = csp->headers->first; (err == JB_ERR_OK) && (p != NULL); p = p->next) - { - /* Header crunch()ed in previous run? -> ignore */ - if (p->str == NULL) continue; - - /* Does the current parser handle this header? */ - if (strncmpic(p->str, v->str, v->len) == 0) - { - err = v->parser(csp, (char **)&(p->str)); - } - } - } - } - - return err; -} - - -/********************************************************************* - * - * Function : header_tagger - * - * Description : Executes all text substitutions from applying - * tag actions and saves the result as tag. - * - * XXX: Shares enough code with filter_header() and - * pcrs_filter_response() to warrant some helper functions. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = Header that is used as tagger input - * - * Returns : JB_ERR_OK on success and always succeeds - * - *********************************************************************/ -static jb_err header_tagger(struct client_state *csp, char *header) -{ - int wanted_filter_type; - int multi_action_index; - int i; - pcrs_job *job; - - struct file_list *fl; - struct re_filterfile_spec *b; - struct list_entry *tag_name; - - int found_filters = 0; - const size_t header_length = strlen(header); - - if (csp->flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE) - { - wanted_filter_type = FT_SERVER_HEADER_TAGGER; - multi_action_index = ACTION_MULTI_SERVER_HEADER_TAGGER; - } - else - { - wanted_filter_type = FT_CLIENT_HEADER_TAGGER; - multi_action_index = ACTION_MULTI_CLIENT_HEADER_TAGGER; - } - - /* Check if there are any filters */ - for (i = 0; i < MAX_AF_FILES; i++) - { - fl = csp->rlist[i]; - if (NULL != fl) - { - if (NULL != fl->f) - { - found_filters = 1; - break; - } - } - } - - if (0 == found_filters) - { - log_error(LOG_LEVEL_ERROR, "Inconsistent configuration: " - "tagging enabled, but no taggers available."); - return JB_ERR_OK; - } - - for (i = 0; i < MAX_AF_FILES; i++) - { - fl = csp->rlist[i]; - if ((NULL == fl) || (NULL == fl->f)) - { - /* - * Either there are no filter files - * left, or this filter file just - * contains no valid filters. - * - * Continue to be sure we don't miss - * valid filter files that are chained - * after empty or invalid ones. - */ - continue; - } - - /* For all filters, */ - for (b = fl->f; b; b = b->next) - { - if (b->type != wanted_filter_type) - { - /* skip the ones we don't care about, */ - continue; - } - /* leaving only taggers that could apply, of which we use the ones, */ - for (tag_name = csp->action->multi[multi_action_index]->first; - NULL != tag_name; tag_name = tag_name->next) - { - /* that do apply, and */ - if (strcmp(b->name, tag_name->str) == 0) - { - char *modified_tag = NULL; - char *tag = header; - size_t size = header_length; - pcrs_job *joblist = b->joblist; - - if (b->dynamic) joblist = compile_dynamic_pcrs_job_list(csp, b); - - if (NULL == joblist) - { - log_error(LOG_LEVEL_RE_FILTER, - "Tagger %s has empty joblist. Nothing to do.", b->name); - continue; - } - - /* execute their pcrs_joblist on the header. */ - for (job = joblist; NULL != job; job = job->next) - { - const int hits = pcrs_execute(job, tag, size, &modified_tag, &size); - - if (0 < hits) - { - /* Success, continue with the modified version. */ - if (tag != header) - { - freez(tag); - } - tag = modified_tag; - } - else - { - /* Tagger doesn't match */ - if (0 > hits) - { - /* Regex failure, log it but continue anyway. */ - assert(NULL != header); - log_error(LOG_LEVEL_ERROR, - "Problems with tagger \'%s\' and header \'%s\': %s", - b->name, *header, pcrs_strerror(hits)); - } - freez(modified_tag); - } - } - - if (b->dynamic) pcrs_free_joblist(joblist); - - /* If this tagger matched */ - if (tag != header) - { - if (0 == size) - { - /* - * There is to technical limitation which makes - * it impossible to use empty tags, but I assume - * no one would do it intentionally. - */ - freez(tag); - log_error(LOG_LEVEL_INFO, - "Tagger \'%s\' created an empty tag. Ignored.", - b->name); - continue; - } - - if (!list_contains_item(csp->tags, tag)) - { - if (JB_ERR_OK != enlist(csp->tags, tag)) - { - log_error(LOG_LEVEL_ERROR, - "Insufficient memory to add tag \'%s\', " - "based on tagger \'%s\' and header \'%s\'", - tag, b->name, *header); - } - else - { - char *action_message; - /* - * update the action bits right away, to make - * tagging based on tags set by earlier taggers - * of the same kind possible. - */ - if (update_action_bits_for_tag(csp, tag)) - { - action_message = "Action bits updated accordingly."; - } - else - { - action_message = "No action bits update necessary."; - } - - log_error(LOG_LEVEL_HEADER, - "Tagger \'%s\' added tag \'%s\'. %s", - b->name, tag, action_message); - } - } - else - { - /* XXX: Is this log-worthy? */ - log_error(LOG_LEVEL_HEADER, - "Tagger \'%s\' didn't add tag \'%s\'. " - "Tag already present", b->name, tag); - } - freez(tag); - } /* if the tagger matched */ - } /* if the tagger applies */ - } /* for every tagger that could apply */ - } /* for all filters */ - } /* for all filter files */ - - return JB_ERR_OK; -} - -/* here begins the family of parser functions that reformat header lines */ - -/********************************************************************* - * - * Function : filter_header - * - * Description : Executes all text substitutions from all applying - * +(server|client)-header-filter actions on the header. - * Most of the code was copied from pcrs_filter_response, - * including the rather short variable names - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success and always succeeds - * - *********************************************************************/ -static jb_err filter_header(struct client_state *csp, char **header) -{ - int hits=0; - int matches; - size_t size = strlen(*header); - - char *newheader = NULL; - pcrs_job *job; - - struct file_list *fl; - struct re_filterfile_spec *b; - struct list_entry *filtername; - - int i, found_filters = 0; - int wanted_filter_type; - int multi_action_index; - - if (csp->flags & CSP_FLAG_NO_FILTERING) - { - return JB_ERR_OK; - } - - if (csp->flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE) - { - wanted_filter_type = FT_SERVER_HEADER_FILTER; - multi_action_index = ACTION_MULTI_SERVER_HEADER_FILTER; - } - else - { - wanted_filter_type = FT_CLIENT_HEADER_FILTER; - multi_action_index = ACTION_MULTI_CLIENT_HEADER_FILTER; - } - - /* - * Need to check the set of re_filterfiles... - */ - for (i = 0; i < MAX_AF_FILES; i++) - { - fl = csp->rlist[i]; - if (NULL != fl) - { - if (NULL != fl->f) - { - found_filters = 1; - break; - } - } - } - - if (0 == found_filters) - { - log_error(LOG_LEVEL_ERROR, "Inconsistent configuration: " - "header filtering enabled, but no matching filters available."); - return JB_ERR_OK; - } - - for (i = 0; i < MAX_AF_FILES; i++) - { - fl = csp->rlist[i]; - if ((NULL == fl) || (NULL == fl->f)) - { - /* - * Either there are no filter files - * left, or this filter file just - * contains no valid filters. - * - * Continue to be sure we don't miss - * valid filter files that are chained - * after empty or invalid ones. - */ - continue; - } - /* - * For all applying +filter actions, look if a filter by that - * name exists and if yes, execute its pcrs_joblist on the - * buffer. - */ - for (b = fl->f; b; b = b->next) - { - if (b->type != wanted_filter_type) - { - /* Skip other filter types */ - continue; - } - - for (filtername = csp->action->multi[multi_action_index]->first; - filtername ; filtername = filtername->next) - { - if (strcmp(b->name, filtername->str) == 0) - { - int current_hits = 0; - pcrs_job *joblist = b->joblist; - - if (b->dynamic) joblist = compile_dynamic_pcrs_job_list(csp, b); - - if (NULL == joblist) - { - log_error(LOG_LEVEL_RE_FILTER, "Filter %s has empty joblist. Nothing to do.", b->name); - continue; - } - - log_error(LOG_LEVEL_RE_FILTER, "filtering \'%s\' (size %d) with \'%s\' ...", - *header, size, b->name); - - /* Apply all jobs from the joblist */ - for (job = joblist; NULL != job; job = job->next) - { - matches = pcrs_execute(job, *header, size, &newheader, &size); - if ( 0 < matches ) - { - current_hits += matches; - log_error(LOG_LEVEL_HEADER, "Transforming \"%s\" to \"%s\"", *header, newheader); - freez(*header); - *header = newheader; - } - else if ( 0 == matches ) - { - /* Filter doesn't change header */ - freez(newheader); - } - else - { - /* RegEx failure */ - log_error(LOG_LEVEL_ERROR, "Filtering \'%s\' with \'%s\' didn't work out: %s", - *header, b->name, pcrs_strerror(matches)); - if (newheader != NULL) - { - log_error(LOG_LEVEL_ERROR, "Freeing what's left: %s", newheader); - freez(newheader); - } - } - } - - if (b->dynamic) pcrs_free_joblist(joblist); - - log_error(LOG_LEVEL_RE_FILTER, "... produced %d hits (new size %d).", current_hits, size); - hits += current_hits; - } - } - } - } - - /* - * Additionally checking for hits is important because if - * the continue hack is triggered, server headers can - * arrive empty to separate multiple heads from each other. - */ - if ((0 == size) && hits) - { - log_error(LOG_LEVEL_HEADER, "Removing empty header %s", *header); - freez(*header); - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : server_connection - * - * Description : Makes sure that the value of the Connection: header - * is "close" and signals server_connection_close_adder - * to do nothing. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_connection(struct client_state *csp, char **header) -{ - char *old_header = *header; - - /* Do we have a 'Connection: close' header? */ - if (strcmpic(*header, "Connection: close")) - { -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - if ((csp->config->feature_flags & - RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE) - && !strcmpic(*header, "Connection: keep-alive")) - { - /* Remember to keep the connection alive. */ - csp->flags |= CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE; - } -#endif /* FEATURE_CONNECTION_KEEP_ALIVE */ - - *header = strdup("Connection: close"); - if (header == NULL) - { - return JB_ERR_MEMORY; - } - log_error(LOG_LEVEL_HEADER, "Replaced: \'%s\' with \'%s\'", old_header, *header); - freez(old_header); - } - - /* Signal server_connection_close_adder() to return early. */ - csp->flags |= CSP_FLAG_SERVER_CONNECTION_CLOSE_SET; - - return JB_ERR_OK; -} - -/********************************************************************* - * - * Function : client_connection - * - * Description : Makes sure a proper "Connection:" header is - * set and signals connection_header_adder - * to do nothing. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_connection(struct client_state *csp, char **header) -{ - char *old_header = *header; - const char *wanted_header = get_appropiate_connection_header(csp); - - if (strcmpic(*header, wanted_header)) - { - *header = strdup(wanted_header); - if (header == NULL) - { - return JB_ERR_MEMORY; - } - log_error(LOG_LEVEL_HEADER, - "Replaced: \'%s\' with \'%s\'", old_header, *header); - freez(old_header); - } - - /* Signal client_connection_close_adder() to return early. */ - csp->flags |= CSP_FLAG_CLIENT_CONNECTION_HEADER_SET; - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : crumble - * - * Description : This is called if a header matches a pattern to "crunch" - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err crumble(struct client_state *csp, char **header) -{ - (void)csp; - log_error(LOG_LEVEL_HEADER, "crumble crunched: %s!", *header); - freez(*header); - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : crunch_server_header - * - * Description : Crunch server header if it matches a string supplied by the - * user. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success and always succeeds - * - *********************************************************************/ -static jb_err crunch_server_header(struct client_state *csp, char **header) -{ - const char *crunch_pattern; - - /* Do we feel like crunching? */ - if ((csp->action->flags & ACTION_CRUNCH_SERVER_HEADER)) - { - crunch_pattern = csp->action->string[ACTION_STRING_SERVER_HEADER]; - - /* Is the current header the lucky one? */ - if (strstr(*header, crunch_pattern)) - { - log_error(LOG_LEVEL_HEADER, "Crunching server header: %s (contains: %s)", *header, crunch_pattern); - freez(*header); - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : server_content_type - * - * Description : Set the content-type for filterable types (text/.*, - * .*xml.*, javascript and image/gif) unless filtering has been - * forbidden (CT_TABOO) while parsing earlier headers. - * NOTE: Since text/plain is commonly used by web servers - * for files whose correct type is unknown, we don't - * set CT_TEXT for it. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_content_type(struct client_state *csp, char **header) -{ - /* Remove header if it isn't the first Content-Type header */ - if ((csp->content_type & CT_DECLARED)) - { - /* - * Another, slightly slower, way to see if - * we already parsed another Content-Type header. - */ - assert(NULL != get_header_value(csp->headers, "Content-Type:")); - - log_error(LOG_LEVEL_ERROR, - "Multiple Content-Type headers. Removing and ignoring: \'%s\'", - *header); - freez(*header); - - return JB_ERR_OK; - } - - /* - * Signal that the Content-Type has been set. - */ - csp->content_type |= CT_DECLARED; - - if (!(csp->content_type & CT_TABOO)) - { - /* - * XXX: The assumption that text/plain is a sign of - * binary data seems to be somewhat unreasonable nowadays - * and should be dropped after 3.0.8 is out. - */ - if ((strstr(*header, "text/") && !strstr(*header, "plain")) - || strstr(*header, "xml") - || strstr(*header, "application/x-javascript")) - { - csp->content_type |= CT_TEXT; - } - else if (strstr(*header, "image/gif")) - { - csp->content_type |= CT_GIF; - } - } - - /* - * Are we messing with the content type? - */ - if (csp->action->flags & ACTION_CONTENT_TYPE_OVERWRITE) - { - /* - * Make sure the user doesn't accidently - * change the content type of binary documents. - */ - if ((csp->content_type & CT_TEXT) || (csp->action->flags & ACTION_FORCE_TEXT_MODE)) - { - freez(*header); - *header = strdup("Content-Type: "); - string_append(header, csp->action->string[ACTION_STRING_CONTENT_TYPE]); - - if (header == NULL) - { - log_error(LOG_LEVEL_HEADER, "Insufficient memory to replace Content-Type!"); - return JB_ERR_MEMORY; - } - log_error(LOG_LEVEL_HEADER, "Modified: %s!", *header); - } - else - { - log_error(LOG_LEVEL_HEADER, "%s not replaced. " - "It doesn't look like a content type that should be filtered. " - "Enable force-text-mode if you know what you're doing.", *header); - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : server_transfer_coding - * - * Description : - Prohibit filtering (CT_TABOO) if transfer coding compresses - * - Raise the CSP_FLAG_CHUNKED flag if coding is "chunked" - * - Remove header if body was chunked but has been - * de-chunked for filtering. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_transfer_coding(struct client_state *csp, char **header) -{ - /* - * Turn off pcrs and gif filtering if body compressed - */ - if (strstr(*header, "gzip") || strstr(*header, "compress") || strstr(*header, "deflate")) - { -#ifdef FEATURE_ZLIB - /* - * XXX: Added to test if we could use CT_GZIP and CT_DEFLATE here. - */ - log_error(LOG_LEVEL_INFO, "Marking content type for %s as CT_TABOO because of %s.", - csp->http->cmd, *header); -#endif /* def FEATURE_ZLIB */ - csp->content_type = CT_TABOO; - } - - /* - * Raise flag if body chunked - */ - if (strstr(*header, "chunked")) - { - csp->flags |= CSP_FLAG_CHUNKED; - - /* - * If the body was modified, it has been de-chunked first - * and the header must be removed. - * - * FIXME: If there is more than one transfer encoding, - * only the "chunked" part should be removed here. - */ - if (csp->flags & CSP_FLAG_MODIFIED) - { - log_error(LOG_LEVEL_HEADER, "Removing: %s", *header); - freez(*header); - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : server_content_encoding - * - * Description : This function is run twice for each request, - * unless FEATURE_ZLIB and filtering are disabled. - * - * The first run is used to check if the content - * is compressed, if FEATURE_ZLIB is disabled - * filtering is then disabled as well, if FEATURE_ZLIB - * is enabled the content is marked for decompression. - * - * The second run is used to remove the Content-Encoding - * header if the decompression was successful. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_content_encoding(struct client_state *csp, char **header) -{ -#ifdef FEATURE_ZLIB - if ((csp->flags & CSP_FLAG_MODIFIED) - && (csp->content_type & (CT_GZIP | CT_DEFLATE))) - { - /* - * We successfully decompressed the content, - * and have to clean the header now, so the - * client no longer expects compressed data.. - * - * XXX: There is a difference between cleaning - * and removing it completely. - */ - log_error(LOG_LEVEL_HEADER, "Crunching: %s", *header); - freez(*header); - } - else if (strstr(*header, "gzip")) - { - /* Mark for gzip decompression */ - csp->content_type |= CT_GZIP; - } - else if (strstr(*header, "deflate")) - { - /* Mark for zlib decompression */ - csp->content_type |= CT_DEFLATE; - } - else if (strstr(*header, "compress")) - { - /* - * We can't decompress this; therefore we can't filter - * it either. - */ - csp->content_type |= CT_TABOO; - } -#else /* !defined(FEATURE_ZLIB) */ - if (strstr(*header, "gzip") || strstr(*header, "compress") || strstr(*header, "deflate")) - { - /* - * Body is compressed, turn off pcrs and gif filtering. - */ - csp->content_type |= CT_TABOO; - - /* - * Log a warning if the user expects the content to be filtered. - */ - if ((csp->rlist != NULL) && - (!list_is_empty(csp->action->multi[ACTION_MULTI_FILTER]))) - { - log_error(LOG_LEVEL_INFO, - "Compressed content detected, content filtering disabled. " - "Consider recompiling Privoxy with zlib support or " - "enable the prevent-compression action."); - } - } -#endif /* defined(FEATURE_ZLIB) */ - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : server_adjust_content_length - * - * Description : Adjust Content-Length header if we modified - * the body. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_adjust_content_length(struct client_state *csp, char **header) -{ - const size_t max_header_length = 80; - - /* Regenerate header if the content was modified. */ - if (csp->flags & CSP_FLAG_MODIFIED) - { - freez(*header); - *header = (char *) zalloc(max_header_length); - if (*header == NULL) - { - return JB_ERR_MEMORY; - } - - snprintf(*header, max_header_length, "Content-Length: %d", - (int)csp->content_length); - log_error(LOG_LEVEL_HEADER, "Adjusted Content-Length to %d", - (int)csp->content_length); - } - - return JB_ERR_OK; -} - - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE -/********************************************************************* - * - * Function : server_save_content_length - * - * Description : Save the Content-Length sent by the server. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_save_content_length(struct client_state *csp, char **header) -{ - unsigned long long content_length = 0; - - assert(*(*header+14) == ':'); - - if (1 != sscanf(*header+14, ": %llu", &content_length)) - { - log_error(LOG_LEVEL_ERROR, "Crunching invalid header: %s", *header); - freez(*header); - } - else - { - csp->expected_content_length = content_length; - csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET; - } - - return JB_ERR_OK; -} -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - - -/********************************************************************* - * - * Function : server_content_md5 - * - * Description : Crumble any Content-MD5 headers if the document was - * modified. FIXME: Should we re-compute instead? - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_content_md5(struct client_state *csp, char **header) -{ - if (csp->flags & CSP_FLAG_MODIFIED) - { - log_error(LOG_LEVEL_HEADER, "Crunching Content-MD5"); - freez(*header); - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : server_content_disposition - * - * Description : If enabled, blocks or modifies the "Content-Disposition" header. - * Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_content_disposition(struct client_state *csp, char **header) -{ - const char *newval; - - /* - * Are we messing with the Content-Disposition header? - */ - if ((csp->action->flags & ACTION_HIDE_CONTENT_DISPOSITION) == 0) - { - /* Me tinks not */ - return JB_ERR_OK; - } - - newval = csp->action->string[ACTION_STRING_CONTENT_DISPOSITION]; - - if ((newval == NULL) || (0 == strcmpic(newval, "block"))) - { - /* - * Blocking content-disposition header - */ - log_error(LOG_LEVEL_HEADER, "Crunching %s!", *header); - freez(*header); - return JB_ERR_OK; - } - else - { - /* - * Replacing Content-Disposition header - */ - freez(*header); - *header = strdup("Content-Disposition: "); - string_append(header, newval); - - if (*header != NULL) - { - log_error(LOG_LEVEL_HEADER, - "Content-Disposition header crunched and replaced with: %s", *header); - } - } - return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : server_last_modified - * - * Description : Changes Last-Modified header to the actual date - * to help hide-if-modified-since. - * Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_last_modified(struct client_state *csp, char **header) -{ - const char *newval; - char buf[BUFFER_SIZE]; - - char newheader[50]; -#ifdef HAVE_GMTIME_R - struct tm gmt; -#endif - struct tm *timeptr = NULL; - time_t now, last_modified; - long int rtime; - long int days, hours, minutes, seconds; - - /* - * Are we messing with the Last-Modified header? - */ - if ((csp->action->flags & ACTION_OVERWRITE_LAST_MODIFIED) == 0) - { - /*Nope*/ - return JB_ERR_OK; - } - - newval = csp->action->string[ACTION_STRING_LAST_MODIFIED]; - - if (0 == strcmpic(newval, "block") ) - { - /* - * Blocking Last-Modified header. Useless but why not. - */ - log_error(LOG_LEVEL_HEADER, "Crunching %s!", *header); - freez(*header); - return JB_ERR_OK; - } - else if (0 == strcmpic(newval, "reset-to-request-time")) - { - /* - * Setting Last-Modified Header to now. - */ - get_http_time(0, buf, sizeof(buf)); - freez(*header); - *header = strdup("Last-Modified: "); - string_append(header, buf); - - if (*header == NULL) - { - log_error(LOG_LEVEL_HEADER, "Insufficient memory. Last-Modified header got lost, boohoo."); - } - else - { - log_error(LOG_LEVEL_HEADER, "Reset to present time: %s", *header); - } - } - else if (0 == strcmpic(newval, "randomize")) - { - const char *header_time = *header + sizeof("Last-Modified:"); - - log_error(LOG_LEVEL_HEADER, "Randomizing: %s", *header); - now = time(NULL); -#ifdef HAVE_GMTIME_R - timeptr = gmtime_r(&now, &gmt); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&gmtime_mutex); - timeptr = gmtime(&now); - privoxy_mutex_unlock(&gmtime_mutex); -#else - timeptr = gmtime(&now); -#endif - if (JB_ERR_OK != parse_header_time(header_time, &last_modified)) - { - log_error(LOG_LEVEL_HEADER, "Couldn't parse: %s in %s (crunching!)", header_time, *header); - freez(*header); - } - else - { - rtime = (long int)difftime(now, last_modified); - if (rtime) - { - int negative = 0; - - if (rtime < 0) - { - rtime *= -1; - negative = 1; - log_error(LOG_LEVEL_HEADER, "Server time in the future."); - } - rtime = pick_from_range(rtime); - if (negative) rtime *= -1; - last_modified += rtime; -#ifdef HAVE_GMTIME_R - timeptr = gmtime_r(&last_modified, &gmt); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&gmtime_mutex); - timeptr = gmtime(&last_modified); - privoxy_mutex_unlock(&gmtime_mutex); -#else - timeptr = gmtime(&last_modified); -#endif - strftime(newheader, sizeof(newheader), "%a, %d %b %Y %H:%M:%S GMT", timeptr); - freez(*header); - *header = strdup("Last-Modified: "); - string_append(header, newheader); - - if (*header == NULL) - { - log_error(LOG_LEVEL_ERROR, "Insufficient memory, header crunched without replacement."); - return JB_ERR_MEMORY; - } - - days = rtime / (3600 * 24); - hours = rtime / 3600 % 24; - minutes = rtime / 60 % 60; - seconds = rtime % 60; - - log_error(LOG_LEVEL_HEADER, - "Randomized: %s (added %d da%s %d hou%s %d minut%s %d second%s", - *header, days, (days == 1) ? "y" : "ys", hours, (hours == 1) ? "r" : "rs", - minutes, (minutes == 1) ? "e" : "es", seconds, (seconds == 1) ? ")" : "s)"); - } - else - { - log_error(LOG_LEVEL_HEADER, "Randomized ... or not. No time difference to work with."); - } - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_accept_encoding - * - * Description : Rewrite the client's Accept-Encoding header so that - * if doesn't allow compression, if the action applies. - * Note: For HTTP/1.0 the absence of the header is enough. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_accept_encoding(struct client_state *csp, char **header) -{ - if ((csp->action->flags & ACTION_NO_COMPRESSION) != 0) - { - log_error(LOG_LEVEL_HEADER, "Suppressed offer to compress content"); - - freez(*header); - - /* Temporarily disable the correct behaviour to - * work around a PHP bug. - * - * if (!strcmpic(csp->http->ver, "HTTP/1.1")) - * { - * *header = strdup("Accept-Encoding: identity;q=1.0, *;q=0"); - * if (*header == NULL) - * { - * return JB_ERR_MEMORY; - * } - * } - * - */ - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_te - * - * Description : Rewrite the client's TE header so that - * if doesn't allow compression, if the action applies. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_te(struct client_state *csp, char **header) -{ - if ((csp->action->flags & ACTION_NO_COMPRESSION) != 0) - { - freez(*header); - log_error(LOG_LEVEL_HEADER, "Suppressed offer to compress transfer"); - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_referrer - * - * Description : Handle the "referer" config setting properly. - * Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_referrer(struct client_state *csp, char **header) -{ - const char *parameter; - /* booleans for parameters we have to check multiple times */ - int parameter_conditional_block; - int parameter_conditional_forge; - -#ifdef FEATURE_FORCE_LOAD - /* - * Since the referrer can include the prefix even - * if the request itself is non-forced, we must - * clean it unconditionally. - * - * XXX: strclean is too broad - */ - strclean(*header, FORCE_PREFIX); -#endif /* def FEATURE_FORCE_LOAD */ - - if ((csp->action->flags & ACTION_HIDE_REFERER) == 0) - { - /* Nothing left to do */ - return JB_ERR_OK; - } - - parameter = csp->action->string[ACTION_STRING_REFERER]; - assert(parameter != NULL); - parameter_conditional_block = (0 == strcmpic(parameter, "conditional-block")); - parameter_conditional_forge = (0 == strcmpic(parameter, "conditional-forge")); - - if (!parameter_conditional_block && !parameter_conditional_forge) - { - /* - * As conditional-block and conditional-forge are the only - * parameters that rely on the original referrer, we can - * remove it now for all the others. - */ - freez(*header); - } - - if (0 == strcmpic(parameter, "block")) - { - log_error(LOG_LEVEL_HEADER, "Referer crunched!"); - return JB_ERR_OK; - } - else if (parameter_conditional_block || parameter_conditional_forge) - { - return handle_conditional_hide_referrer_parameter(header, - csp->http->hostport, parameter_conditional_block); - } - else if (0 == strcmpic(parameter, "forge")) - { - return create_forged_referrer(header, csp->http->hostport); - } - else - { - /* interpret parameter as user-supplied referer to fake */ - return create_fake_referrer(header, parameter); - } -} - - -/********************************************************************* - * - * Function : client_accept_language - * - * Description : Handle the "Accept-Language" config setting properly. - * Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_accept_language(struct client_state *csp, char **header) -{ - const char *newval; - - /* - * Are we messing with the Accept-Language? - */ - if ((csp->action->flags & ACTION_HIDE_ACCEPT_LANGUAGE) == 0) - { - /*I don't think so*/ - return JB_ERR_OK; - } - - newval = csp->action->string[ACTION_STRING_LANGUAGE]; - - if ((newval == NULL) || (0 == strcmpic(newval, "block")) ) - { - /* - * Blocking Accept-Language header - */ - log_error(LOG_LEVEL_HEADER, "Crunching Accept-Language!"); - freez(*header); - return JB_ERR_OK; - } - else - { - /* - * Replacing Accept-Language header - */ - freez(*header); - *header = strdup("Accept-Language: "); - string_append(header, newval); - - if (*header == NULL) - { - log_error(LOG_LEVEL_ERROR, - "Insufficient memory. Accept-Language header crunched without replacement."); - } - else - { - log_error(LOG_LEVEL_HEADER, - "Accept-Language header crunched and replaced with: %s", *header); - } - } - return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : crunch_client_header - * - * Description : Crunch client header if it matches a string supplied by the - * user. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success and always succeeds - * - *********************************************************************/ -static jb_err crunch_client_header(struct client_state *csp, char **header) -{ - const char *crunch_pattern; - - /* Do we feel like crunching? */ - if ((csp->action->flags & ACTION_CRUNCH_CLIENT_HEADER)) - { - crunch_pattern = csp->action->string[ACTION_STRING_CLIENT_HEADER]; - - /* Is the current header the lucky one? */ - if (strstr(*header, crunch_pattern)) - { - log_error(LOG_LEVEL_HEADER, "Crunching client header: %s (contains: %s)", *header, crunch_pattern); - freez(*header); - } - } - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_uagent - * - * Description : Handle the "user-agent" config setting properly - * and remember its original value to enable browser - * bug workarounds. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_uagent(struct client_state *csp, char **header) -{ - const char *newval; - - if ((csp->action->flags & ACTION_HIDE_USER_AGENT) == 0) - { - return JB_ERR_OK; - } - - newval = csp->action->string[ACTION_STRING_USER_AGENT]; - if (newval == NULL) - { - return JB_ERR_OK; - } - - freez(*header); - *header = strdup("User-Agent: "); - string_append(header, newval); - - log_error(LOG_LEVEL_HEADER, "Modified: %s", *header); - - return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_ua - * - * Description : Handle "ua-" headers properly. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_ua(struct client_state *csp, char **header) -{ - if ((csp->action->flags & ACTION_HIDE_USER_AGENT) != 0) - { - log_error(LOG_LEVEL_HEADER, "crunched User-Agent!"); - freez(*header); - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_from - * - * Description : Handle the "from" config setting properly. - * Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_from(struct client_state *csp, char **header) -{ - const char *newval; - - if ((csp->action->flags & ACTION_HIDE_FROM) == 0) - { - return JB_ERR_OK; - } - - freez(*header); - - newval = csp->action->string[ACTION_STRING_FROM]; - - /* - * Are we blocking the e-mail address? - */ - if ((newval == NULL) || (0 == strcmpic(newval, "block")) ) - { - log_error(LOG_LEVEL_HEADER, "crunched From!"); - return JB_ERR_OK; - } - - log_error(LOG_LEVEL_HEADER, " modified"); - - *header = strdup("From: "); - string_append(header, newval); - - return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_send_cookie - * - * Description : Crunches the "cookie" header if necessary. - * Called from `sed'. - * - * XXX: Stupid name, doesn't send squat. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_send_cookie(struct client_state *csp, char **header) -{ - if (csp->action->flags & ACTION_NO_COOKIE_READ) - { - log_error(LOG_LEVEL_HEADER, "Crunched outgoing cookie: %s", *header); - freez(*header); - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_x_forwarded - * - * Description : Handle the "x-forwarded-for" config setting properly, - * also used in the add_client_headers list. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -jb_err client_x_forwarded(struct client_state *csp, char **header) -{ - if (0 != (csp->action->flags & ACTION_CHANGE_X_FORWARDED_FOR)) - { - const char *parameter = csp->action->string[ACTION_STRING_CHANGE_X_FORWARDED_FOR]; - - if (0 == strcmpic(parameter, "block")) - { - freez(*header); - log_error(LOG_LEVEL_HEADER, "crunched x-forwarded-for!"); - } - else if (0 == strcmpic(parameter, "add")) - { - string_append(header, ", "); - string_append(header, csp->ip_addr_str); - - if (*header == NULL) - { - return JB_ERR_MEMORY; - } - log_error(LOG_LEVEL_HEADER, - "Appended client IP address to %s", *header); - csp->flags |= CSP_FLAG_X_FORWARDED_FOR_APPENDED; - } - else - { - log_error(LOG_LEVEL_FATAL, - "Invalid change-x-forwarded-for parameter: '%s'", parameter); - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_max_forwards - * - * Description : If the HTTP method is OPTIONS or TRACE, subtract one - * from the value of the Max-Forwards header field. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_max_forwards(struct client_state *csp, char **header) -{ - int max_forwards; - - if ((0 == strcmpic(csp->http->gpc, "trace")) || - (0 == strcmpic(csp->http->gpc, "options"))) - { - assert(*(*header+12) == ':'); - if (1 == sscanf(*header+12, ": %d", &max_forwards)) - { - if (max_forwards > 0) - { - snprintf(*header, strlen(*header)+1, "Max-Forwards: %d", --max_forwards); - log_error(LOG_LEVEL_HEADER, - "Max-Forwards value for %s request reduced to %d.", - csp->http->gpc, max_forwards); - } - else if (max_forwards < 0) - { - log_error(LOG_LEVEL_ERROR, "Crunching invalid header: %s", *header); - freez(*header); - } - } - else - { - log_error(LOG_LEVEL_ERROR, "Crunching invalid header: %s", *header); - freez(*header); - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_host - * - * Description : If the request URI did not contain host and - * port information, parse and evaluate the Host - * header field. - * - * Also, kill ill-formed HOST: headers as sent by - * Apple's iTunes software when used with a proxy. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_host(struct client_state *csp, char **header) -{ - char *p, *q; - - /* - * If the header field name is all upper-case, chances are that it's - * an ill-formed one from iTunes. BTW, killing innocent headers here is - * not a problem -- they are regenerated later. - */ - if ((*header)[1] == 'O') - { - log_error(LOG_LEVEL_HEADER, "Killed all-caps Host header line: %s", *header); - freez(*header); - return JB_ERR_OK; - } - - if (!csp->http->hostport || (*csp->http->hostport == '*') || - *csp->http->hostport == ' ' || *csp->http->hostport == '\0') - { - - if (NULL == (p = strdup((*header)+6))) - { - return JB_ERR_MEMORY; - } - chomp(p); - if (NULL == (q = strdup(p))) - { - freez(p); - return JB_ERR_MEMORY; - } - - freez(csp->http->hostport); - csp->http->hostport = p; - freez(csp->http->host); - csp->http->host = q; - q = strchr(csp->http->host, ':'); - if (q != NULL) - { - /* Terminate hostname and evaluate port string */ - *q++ = '\0'; - csp->http->port = atoi(q); - } - else - { - csp->http->port = csp->http->ssl ? 443 : 80; - } - - log_error(LOG_LEVEL_HEADER, "New host and port from Host field: %s = %s:%d", - csp->http->hostport, csp->http->host, csp->http->port); - } - - /* Signal client_host_adder() to return right away */ - csp->flags |= CSP_FLAG_HOST_HEADER_IS_SET; - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_if_modified_since - * - * Description : Remove or modify the If-Modified-Since header. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_if_modified_since(struct client_state *csp, char **header) -{ - char newheader[50]; -#ifdef HAVE_GMTIME_R - struct tm gmt; -#endif - struct tm *timeptr = NULL; - time_t tm = 0; - const char *newval; - long int rtime; - long int hours, minutes, seconds; - int negative = 0; - char * endptr; - - if ( 0 == strcmpic(*header, "If-Modified-Since: Wed, 08 Jun 1955 12:00:00 GMT")) - { - /* - * The client got an error message because of a temporary problem, - * the problem is gone and the client now tries to revalidate our - * error message on the real server. The revalidation would always - * end with the transmission of the whole document and there is - * no need to expose the bogus If-Modified-Since header. - */ - log_error(LOG_LEVEL_HEADER, "Crunching useless If-Modified-Since header."); - freez(*header); - } - else if (csp->action->flags & ACTION_HIDE_IF_MODIFIED_SINCE) - { - newval = csp->action->string[ACTION_STRING_IF_MODIFIED_SINCE]; - - if ((0 == strcmpic(newval, "block"))) - { - log_error(LOG_LEVEL_HEADER, "Crunching %s", *header); - freez(*header); - } - else /* add random value */ - { - const char *header_time = *header + sizeof("If-Modified-Since:"); - - if (JB_ERR_OK != parse_header_time(header_time, &tm)) - { - log_error(LOG_LEVEL_HEADER, "Couldn't parse: %s in %s (crunching!)", header_time, *header); - freez(*header); - } - else - { - rtime = strtol(newval, &endptr, 0); - if (rtime) - { - log_error(LOG_LEVEL_HEADER, "Randomizing: %s (random range: %d minut%s)", - *header, rtime, (rtime == 1 || rtime == -1) ? "e": "es"); - if (rtime < 0) - { - rtime *= -1; - negative = 1; - } - rtime *= 60; - rtime = pick_from_range(rtime); - } - else - { - log_error(LOG_LEVEL_ERROR, "Random range is 0. Assuming time transformation test.", - *header); - } - tm += rtime * (negative ? -1 : 1); -#ifdef HAVE_GMTIME_R - timeptr = gmtime_r(&tm, &gmt); -#elif FEATURE_PTHREAD - privoxy_mutex_lock(&gmtime_mutex); - timeptr = gmtime(&tm); - privoxy_mutex_unlock(&gmtime_mutex); -#else - timeptr = gmtime(&tm); -#endif - strftime(newheader, sizeof(newheader), "%a, %d %b %Y %H:%M:%S GMT", timeptr); - - freez(*header); - *header = strdup("If-Modified-Since: "); - string_append(header, newheader); - - if (*header == NULL) - { - log_error(LOG_LEVEL_HEADER, "Insufficient memory, header crunched without replacement."); - return JB_ERR_MEMORY; - } - - hours = rtime / 3600; - minutes = rtime / 60 % 60; - seconds = rtime % 60; - - log_error(LOG_LEVEL_HEADER, - "Randomized: %s (%s %d hou%s %d minut%s %d second%s", - *header, (negative) ? "subtracted" : "added", hours, - (hours == 1) ? "r" : "rs", minutes, (minutes == 1) ? "e" : "es", - seconds, (seconds == 1) ? ")" : "s)"); - } - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_if_none_match - * - * Description : Remove the If-None-Match header. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_if_none_match(struct client_state *csp, char **header) -{ - if (csp->action->flags & ACTION_CRUNCH_IF_NONE_MATCH) - { - log_error(LOG_LEVEL_HEADER, "Crunching %s", *header); - freez(*header); - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_x_filter - * - * Description : Disables filtering if the client set "X-Filter: No". - * Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success - * - *********************************************************************/ -jb_err client_x_filter(struct client_state *csp, char **header) -{ - if ( 0 == strcmpic(*header, "X-Filter: No")) - { - if (!(csp->config->feature_flags & RUNTIME_FEATURE_HTTP_TOGGLE)) - { - log_error(LOG_LEVEL_INFO, "Ignored the client's request to fetch without filtering."); - } - else - { - if (csp->action->flags & ACTION_FORCE_TEXT_MODE) - { - log_error(LOG_LEVEL_HEADER, - "force-text-mode overruled the client's request to fetch without filtering!"); - } - else - { - csp->content_type = CT_TABOO; /* XXX: This hack shouldn't be necessary */ - csp->flags |= CSP_FLAG_NO_FILTERING; - log_error(LOG_LEVEL_HEADER, "Accepted the client's request to fetch without filtering."); - } - log_error(LOG_LEVEL_HEADER, "Crunching %s", *header); - freez(*header); - } - } - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_range - * - * Description : Removes Range, Request-Range and If-Range headers if - * content filtering is enabled. If the client's version - * of the document has been altered by Privoxy, the server - * could interpret the range differently than the client - * intended in which case the user could end up with - * corrupted content. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK - * - *********************************************************************/ -static jb_err client_range(struct client_state *csp, char **header) -{ - if (content_filters_enabled(csp->action)) - { - log_error(LOG_LEVEL_HEADER, "Content filtering is enabled." - " Crunching: \'%s\' to prevent range-mismatch problems.", *header); - freez(*header); - } - - return JB_ERR_OK; -} - -/* the following functions add headers directly to the header list */ - -/********************************************************************* - * - * Function : client_host_adder - * - * Description : Adds the Host: header field if it is missing. - * Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_host_adder(struct client_state *csp) -{ - char *p; - jb_err err; - - if (csp->flags & CSP_FLAG_HOST_HEADER_IS_SET) - { - /* Header already set by the client, nothing to do. */ - return JB_ERR_OK; - } - - if ( !csp->http->hostport || !*(csp->http->hostport)) - { - /* XXX: When does this happen and why is it OK? */ - log_error(LOG_LEVEL_INFO, "Weirdness in client_host_adder detected and ignored."); - return JB_ERR_OK; - } - - /* - * remove 'user:pass@' from 'proto://user:pass@host' - */ - if ( (p = strchr( csp->http->hostport, '@')) != NULL ) - { - p++; - } - else - { - p = csp->http->hostport; - } - - /* XXX: Just add it, we already made sure that it will be unique */ - log_error(LOG_LEVEL_HEADER, "addh-unique: Host: %s", p); - err = enlist_unique_header(csp->headers, "Host", p); - return err; - -} - - -#if 0 -/********************************************************************* - * - * Function : client_accept_encoding_adder - * - * Description : Add an Accept-Encoding header to the client's request - * that disables compression if the action applies, and - * the header is not already there. Called from `sed'. - * Note: For HTTP/1.0, the absence of the header is enough. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_accept_encoding_adder(struct client_state *csp) -{ - if ( ((csp->action->flags & ACTION_NO_COMPRESSION) != 0) - && (!strcmpic(csp->http->ver, "HTTP/1.1")) ) - { - return enlist_unique(csp->headers, "Accept-Encoding: identity;q=1.0, *;q=0", 16); - } - - return JB_ERR_OK; -} -#endif - - -/********************************************************************* - * - * Function : client_xtra_adder - * - * Description : Used in the add_client_headers list. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_xtra_adder(struct client_state *csp) -{ - struct list_entry *lst; - jb_err err; - - for (lst = csp->action->multi[ACTION_MULTI_ADD_HEADER]->first; - lst ; lst = lst->next) - { - log_error(LOG_LEVEL_HEADER, "addh: %s", lst->str); - err = enlist(csp->headers, lst->str); - if (err) - { - return err; - } - - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : client_x_forwarded_for_adder - * - * Description : Used in the add_client_headers list. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_x_forwarded_for_adder(struct client_state *csp) -{ - char *header = NULL; - jb_err err; - - if (!((csp->action->flags & ACTION_CHANGE_X_FORWARDED_FOR) - && (0 == strcmpic(csp->action->string[ACTION_STRING_CHANGE_X_FORWARDED_FOR], "add"))) - || (csp->flags & CSP_FLAG_X_FORWARDED_FOR_APPENDED)) - { - /* - * If we aren't adding X-Forwarded-For headers, - * or we already appended an existing X-Forwarded-For - * header, there's nothing left to do here. - */ - return JB_ERR_OK; - } - - header = strdup("X-Forwarded-For: "); - string_append(&header, csp->ip_addr_str); - - if (header == NULL) - { - return JB_ERR_MEMORY; - } - - log_error(LOG_LEVEL_HEADER, "addh: %s", header); - err = enlist(csp->headers, header); - freez(header); - - return err; -} - - -/********************************************************************* - * - * Function : server_connection_close_adder - * - * Description : "Temporary" fix for the needed but missing HTTP/1.1 - * support. Adds a "Connection: close" header to csp->headers - * unless the header was already present. Called from `sed'. - * - * FIXME: This whole function shouldn't be neccessary! - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_connection_close_adder(struct client_state *csp) -{ - const unsigned int flags = csp->flags; - const char *response_status_line = csp->headers->first->str; - - if ((flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE) - && (flags & CSP_FLAG_SERVER_CONNECTION_CLOSE_SET)) - { - return JB_ERR_OK; - } - - /* - * XXX: if we downgraded the response, this check will fail. - */ - if ((csp->config->feature_flags & - RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE) - && (NULL != response_status_line) - && !strncmpic(response_status_line, "HTTP/1.1", 8)) - { - log_error(LOG_LEVEL_HEADER, "A HTTP/1.1 response " - "without Connection header implies keep-alive."); - csp->flags |= CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE; - } - - log_error(LOG_LEVEL_HEADER, "Adding: Connection: close"); - - return enlist(csp->headers, "Connection: close"); -} - - -/********************************************************************* - * - * Function : client_connection_header_adder - * - * Description : Adds a proper "Connection:" header to csp->headers - * unless the header was already present. Called from `sed'. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err client_connection_header_adder(struct client_state *csp) -{ - const unsigned int flags = csp->flags; - const char *wanted_header = get_appropiate_connection_header(csp); - - if (!(flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE) - && (flags & CSP_FLAG_CLIENT_CONNECTION_HEADER_SET)) - { - return JB_ERR_OK; - } - - log_error(LOG_LEVEL_HEADER, "Adding: %s", wanted_header); - - return enlist(csp->headers, wanted_header); -} - - -/********************************************************************* - * - * Function : server_http - * - * Description : - Save the HTTP Status into csp->http->status - * - Set CT_TABOO to prevent filtering if the answer - * is a partial range (HTTP status 206) - * - Rewrite HTTP/1.1 answers to HTTP/1.0 if +downgrade - * action applies. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_http(struct client_state *csp, char **header) -{ - sscanf(*header, "HTTP/%*d.%*d %d", &(csp->http->status)); - if (csp->http->status == 206) - { - csp->content_type = CT_TABOO; - } - - if ((csp->action->flags & ACTION_DOWNGRADE) != 0) - { - /* XXX: Should we do a real validity check here? */ - if (strlen(*header) > 8) - { - (*header)[7] = '0'; - log_error(LOG_LEVEL_HEADER, "Downgraded answer to HTTP/1.0"); - } - else - { - /* - * XXX: Should we block the request or - * enlist a valid status code line here? - */ - log_error(LOG_LEVEL_INFO, "Malformed server response detected. " - "Downgrading to HTTP/1.0 impossible."); - } - } - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : server_set_cookie - * - * Description : Handle the server "cookie" header properly. - * Log cookie to the jar file. Then "crunch", - * accept or rewrite it to a session cookie. - * Called from `sed'. - * - * TODO: Allow the user to specify a new expiration - * time to cause the cookie to expire even before the - * browser is closed. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : header = On input, pointer to header to modify. - * On output, pointer to the modified header, or NULL - * to remove the header. This function frees the - * original string if necessary. - * - * Returns : JB_ERR_OK on success, or - * JB_ERR_MEMORY on out-of-memory error. - * - *********************************************************************/ -static jb_err server_set_cookie(struct client_state *csp, char **header) -{ - time_t now; - time_t cookie_time; - - time(&now); - - if ((csp->action->flags & ACTION_NO_COOKIE_SET) != 0) - { - log_error(LOG_LEVEL_HEADER, "Crunching incoming cookie: %s", *header); - freez(*header); - } - else if ((csp->action->flags & ACTION_NO_COOKIE_KEEP) != 0) - { - /* Flag whether or not to log a message */ - int changed = 0; - - /* A variable to store the tag we're working on */ - char *cur_tag; - - /* Skip "Set-Cookie:" (11 characters) in header */ - cur_tag = *header + 11; - - /* skip whitespace between "Set-Cookie:" and value */ - while (*cur_tag && ijb_isspace(*cur_tag)) - { - cur_tag++; - } - - /* Loop through each tag in the cookie */ - while (*cur_tag) - { - /* Find next tag */ - char *next_tag = strchr(cur_tag, ';'); - if (next_tag != NULL) - { - /* Skip the ';' character itself */ - next_tag++; - - /* skip whitespace ";" and start of tag */ - while (*next_tag && ijb_isspace(*next_tag)) - { - next_tag++; - } - } - else - { - /* "Next tag" is the end of the string */ - next_tag = cur_tag + strlen(cur_tag); - } - - /* - * Check the expiration date to see - * if the cookie is still valid, if yes, - * rewrite it to a session cookie. - */ - if ((strncmpic(cur_tag, "expires=", 8) == 0) && *(cur_tag + 8)) - { - char *expiration_date = cur_tag + 8; /* Skip "[Ee]xpires=" */ - - /* Did we detect the date properly? */ - if (JB_ERR_OK != parse_header_time(expiration_date, &cookie_time)) - { - /* - * Nope, treat it as if it was still valid. - * - * XXX: Should we remove the whole cookie instead? - */ - log_error(LOG_LEVEL_ERROR, - "Can't parse \'%s\', send by %s. Unsupported time format?", cur_tag, csp->http->url); - string_move(cur_tag, next_tag); - changed = 1; - } - else - { - /* - * Yes. Check if the cookie is still valid. - * - * If the cookie is already expired it's probably - * a delete cookie and even if it isn't, the browser - * will discard it anyway. - */ - - /* - * XXX: timegm() isn't available on some AmigaOS - * versions and our replacement doesn't work. - * - * Our options are to either: - * - * - disable session-cookies-only completely if timegm - * is missing, - * - * - to simply remove all expired tags, like it has - * been done until Privoxy 3.0.6 and to live with - * the consequence that it can cause login/logout - * problems on servers that don't validate their - * input properly, or - * - * - to replace it with mktime in which - * case there is a slight chance of valid cookies - * passing as already expired. - * - * This is the way it's currently done and it's not - * as bad as it sounds. If the missing GMT offset is - * enough to change the result of the expiration check - * the cookie will be only valid for a few hours - * anyway, which in many cases will be shorter - * than a browser session. - */ - if (cookie_time - now < 0) - { - log_error(LOG_LEVEL_HEADER, - "Cookie \'%s\' is already expired and can pass unmodified.", *header); - /* Just in case some clown sets more then one expiration date */ - cur_tag = next_tag; - } - else - { - /* - * Still valid, delete expiration date by copying - * the rest of the string over it. - */ - string_move(cur_tag, next_tag); - - /* That changed the header, need to issue a log message */ - changed = 1; - - /* - * Note that the next tag has now been moved to *cur_tag, - * so we do not need to update the cur_tag pointer. - */ - } - } - - } - else - { - /* Move on to next cookie tag */ - cur_tag = next_tag; - } - } - - if (changed) - { - assert(NULL != *header); - log_error(LOG_LEVEL_HEADER, "Cookie rewritten to a temporary one: %s", - *header); - } - } - - return JB_ERR_OK; -} - - -#ifdef FEATURE_FORCE_LOAD -/********************************************************************* - * - * Function : strclean - * - * Description : In-Situ-Eliminate all occurances of substring in - * string - * - * Parameters : - * 1 : string = string to clean - * 2 : substring = substring to eliminate - * - * Returns : Number of eliminations - * - *********************************************************************/ -int strclean(char *string, const char *substring) -{ - int hits = 0; - size_t len; - char *pos, *p; - - len = strlen(substring); - - while((pos = strstr(string, substring)) != NULL) - { - p = pos + len; - do - { - *(p - len) = *p; - } - while (*p++ != '\0'); - - hits++; - } - - return(hits); -} -#endif /* def FEATURE_FORCE_LOAD */ - - -/********************************************************************* - * - * Function : parse_header_time - * - * Description : Parses time formats used in HTTP header strings - * to get the numerical respresentation. - * - * Parameters : - * 1 : header_time = HTTP header time as string. - * 2 : result = storage for header_time in seconds - * - * Returns : JB_ERR_OK if the time format was recognized, or - * JB_ERR_PARSE otherwise. - * - *********************************************************************/ -static jb_err parse_header_time(const char *header_time, time_t *result) -{ - struct tm gmt; - - /* - * Zero out gmt to prevent time zone offsets. - * - * While this is only necessary on some platforms - * (mingw32 for example), I don't know how to - * detect these automatically and doing it everywhere - * shouldn't hurt. - */ - memset(&gmt, 0, sizeof(gmt)); - - /* Tue, 02 Jun 2037 20:00:00 */ - if ((NULL == strptime(header_time, "%a, %d %b %Y %H:%M:%S", &gmt)) - /* Tue, 02-Jun-2037 20:00:00 */ - && (NULL == strptime(header_time, "%a, %d-%b-%Y %H:%M:%S", &gmt)) - /* Tue, 02-Jun-37 20:00:00 */ - && (NULL == strptime(header_time, "%a, %d-%b-%y %H:%M:%S", &gmt)) - /* Tuesday, 02-Jun-2037 20:00:00 */ - && (NULL == strptime(header_time, "%A, %d-%b-%Y %H:%M:%S", &gmt)) - /* Tuesday Jun 02 20:00:00 2037 */ - && (NULL == strptime(header_time, "%A %b %d %H:%M:%S %Y", &gmt))) - { - return JB_ERR_PARSE; - } - - *result = timegm(&gmt); - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : get_destination_from_headers - * - * Description : Parse the "Host:" header to get the request's destination. - * Only needed if the client's request was forcefully - * redirected into Privoxy. - * - * Code mainly copied from client_host() which is currently - * run too late for this purpose. - * - * Parameters : - * 1 : headers = List of headers (one of them hopefully being - * the "Host:" header) - * 2 : http = storage for the result (host, port and hostport). - * - * Returns : JB_ERR_MEMORY in case of memory problems, - * JB_ERR_PARSE if the host header couldn't be found, - * JB_ERR_OK otherwise. - * - *********************************************************************/ -jb_err get_destination_from_headers(const struct list *headers, struct http_request *http) -{ - char *q; - char *p; - char *host; - - host = get_header_value(headers, "Host:"); - - if (NULL == host) - { - log_error(LOG_LEVEL_ERROR, "No \"Host:\" header found."); - return JB_ERR_PARSE; - } - - if (NULL == (p = strdup((host)))) - { - log_error(LOG_LEVEL_ERROR, "Out of memory while parsing \"Host:\" header"); - return JB_ERR_MEMORY; - } - chomp(p); - if (NULL == (q = strdup(p))) - { - freez(p); - log_error(LOG_LEVEL_ERROR, "Out of memory while parsing \"Host:\" header"); - return JB_ERR_MEMORY; - } - - freez(http->hostport); - http->hostport = p; - freez(http->host); - http->host = q; - q = strchr(http->host, ':'); - if (q != NULL) - { - /* Terminate hostname and evaluate port string */ - *q++ = '\0'; - http->port = atoi(q); - } - else - { - http->port = http->ssl ? 443 : 80; - } - - /* Rebuild request URL */ - freez(http->url); - http->url = strdup(http->ssl ? "https://" : "http://"); - string_append(&http->url, http->hostport); - string_append(&http->url, http->path); - if (http->url == NULL) - { - return JB_ERR_MEMORY; - } - - log_error(LOG_LEVEL_HEADER, "Destination extracted from \"Host:\" header. New request URL: %s", - http->url); - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : create_forged_referrer - * - * Description : Helper for client_referrer to forge a referer as - * 'http://[hostname:port/' to fool stupid - * checks for in-site links - * - * Parameters : - * 1 : header = Pointer to header pointer - * 2 : hostport = Host and optionally port as string - * - * Returns : JB_ERR_OK in case of success, or - * JB_ERR_MEMORY in case of memory problems. - * - *********************************************************************/ -static jb_err create_forged_referrer(char **header, const char *hostport) -{ - assert(NULL == *header); - - *header = strdup("Referer: http://"); - string_append(header, hostport); - string_append(header, "/"); - - if (NULL == *header) - { - return JB_ERR_MEMORY; - } - - log_error(LOG_LEVEL_HEADER, "Referer forged to: %s", *header); - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : create_fake_referrer - * - * Description : Helper for client_referrer to create a fake referrer - * based on a string supplied by the user. - * - * Parameters : - * 1 : header = Pointer to header pointer - * 2 : hosthost = Referrer to fake - * - * Returns : JB_ERR_OK in case of success, or - * JB_ERR_MEMORY in case of memory problems. - * - *********************************************************************/ -static jb_err create_fake_referrer(char **header, const char *fake_referrer) -{ - assert(NULL == *header); - - if ((0 != strncmpic(fake_referrer, "http://", 7)) && (0 != strncmpic(fake_referrer, "https://", 8))) - { - log_error(LOG_LEVEL_HEADER, - "Parameter: +hide-referrer{%s} is a bad idea, but I don't care.", fake_referrer); - } - *header = strdup("Referer: "); - string_append(header, fake_referrer); - - if (NULL == *header) - { - return JB_ERR_MEMORY; - } - - log_error(LOG_LEVEL_HEADER, "Referer replaced with: %s", *header); - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : handle_conditional_hide_referrer_parameter - * - * Description : Helper for client_referrer to crunch or forge - * the referrer header if the host has changed. - * - * Parameters : - * 1 : header = Pointer to header pointer - * 2 : host = The target host (may include the port) - * 3 : parameter_conditional_block = Boolean to signal - * if we're in conditional-block mode. If not set, - * we're in conditional-forge mode. - * - * Returns : JB_ERR_OK in case of success, or - * JB_ERR_MEMORY in case of memory problems. - * - *********************************************************************/ -static jb_err handle_conditional_hide_referrer_parameter(char **header, - const char *host, const int parameter_conditional_block) -{ - char *referer = strdup(*header); - const size_t hostlenght = strlen(host); - const char *referer_url = NULL; - - if (NULL == referer) - { - freez(*header); - return JB_ERR_MEMORY; - } - - /* referer begins with 'Referer: http[s]://' */ - if ((hostlenght+17) < strlen(referer)) - { - /* - * Shorten referer to make sure the referer is blocked - * if www.example.org/www.example.com-shall-see-the-referer/ - * links to www.example.com/ - */ - referer[hostlenght+17] = '\0'; - } - referer_url = strstr(referer, "http://"); - if ((NULL == referer_url) || (NULL == strstr(referer_url, host))) - { - /* Host has changed, Referer is invalid or a https URL. */ - if (parameter_conditional_block) - { - log_error(LOG_LEVEL_HEADER, "New host is: %s. Crunching %s!", host, *header); - freez(*header); - } - else - { - freez(*header); - freez(referer); - return create_forged_referrer(header, host); - } - } - freez(referer); - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : get_appropiate_connection_header - * - * Description : Returns an appropiate Connection header - * depending on whether or not we try to keep - * the connection to the server alive. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * - * Returns : Pointer to statically allocated header buffer. - * - *********************************************************************/ -static const char *get_appropiate_connection_header(const struct client_state *csp) -{ - static const char connection_keep_alive[] = "Connection: keep-alive"; - static const char connection_close[] = "Connection: close"; - - if ((csp->config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE) - && (csp->http->ssl == 0)) - { - return connection_keep_alive; - } - return connection_close; -} -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/parsers.c.rej b/external/privoxy/parsers.c.rej deleted file mode 100644 index 84b4ba7..0000000 --- a/external/privoxy/parsers.c.rej +++ /dev/null @@ -1,16 +0,0 @@ -*************** -*** 986,991 **** - const add_header_func_ptr add_client_headers[] = { - client_host_adder, - client_cookie_adder, - client_xtra_adder, - /* Temporarily disabled: client_accept_encoding_adder, */ - connection_close_adder, ---- 983,989 ---- - const add_header_func_ptr add_client_headers[] = { - client_host_adder, - client_cookie_adder, -+ client_x_forwarded_adder, - client_xtra_adder, - /* Temporarily disabled: client_accept_encoding_adder, */ - connection_close_adder, diff --git a/external/privoxy/parsers.h b/external/privoxy/parsers.h deleted file mode 100644 index cf70be4..0000000 --- a/external/privoxy/parsers.h +++ /dev/null @@ -1,323 +0,0 @@ -#ifndef PARSERS_H_INCLUDED -#define PARSERS_H_INCLUDED -#define PARSERS_H_VERSION "$Id: parsers.h,v 1.49 2009/03/13 14:10:07 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/parsers.h,v $ - * - * Purpose : Declares functions to parse/crunch headers and pages. - * Functions declared include: - * `add_to_iob', `client_cookie_adder', `client_from', - * `client_referrer', `client_send_cookie', `client_ua', - * `client_uagent', `client_x_forwarded', - * `client_x_forwarded_adder', `client_xtra_adder', - * `content_type', `crumble', `destroy_list', `enlist', - * `flush_socket', `free_http_request', `get_header', - * `list_to_text', `parse_http_request', `sed', - * and `server_set_cookie'. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: parsers.h,v $ - * Revision 1.49 2009/03/13 14:10:07 fabiankeil - * Fix some more harmless warnings on amd64. - * - * Revision 1.48 2008/05/30 15:57:23 fabiankeil - * Remove now-useless reference to debug. - * - * Revision 1.47 2008/05/21 20:12:11 fabiankeil - * The whole point of strclean() is to modify the - * first parameter, so don't mark it immutable, - * even though the compiler lets us get away with it. - * - * Revision 1.46 2008/05/21 15:47:14 fabiankeil - * Streamline sed()'s prototype and declare - * the header parse and add structures static. - * - * Revision 1.45 2008/05/20 20:13:30 fabiankeil - * Factor update_server_headers() out of sed(), ditch the - * first_run hack and make server_patterns_light static. - * - * Revision 1.44 2008/05/20 16:05:09 fabiankeil - * Move parsers structure definition from project.h to parsers.h. - * - * Revision 1.43 2008/05/10 13:23:38 fabiankeil - * Don't provide get_header() with the whole client state - * structure when it only needs access to csp->iob. - * - * Revision 1.42 2008/04/17 14:40:49 fabiankeil - * Provide get_http_time() with the buffer size so it doesn't - * have to blindly assume that the buffer is big enough. - * - * Revision 1.41 2008/04/16 16:38:21 fabiankeil - * Don't pass the whole csp structure to flush_socket() - * when it only needs a file descriptor and a buffer. - * - * Revision 1.40 2007/08/11 14:47:26 fabiankeil - * Remove the prototypes for functions that are only - * used in parsers.c and thus should be static. - * - * Revision 1.39 2007/06/01 16:31:55 fabiankeil - * Change sed() to return a jb_err in preparation for forward-override{}. - * - * Revision 1.38 2007/03/25 14:27:11 fabiankeil - * Let parse_header_time() return a jb_err code - * instead of a pointer that can only be used to - * check for NULL anyway. - * - * Revision 1.37 2007/03/20 15:22:17 fabiankeil - * - Remove filter_client_header() and filter_client_header(), - * filter_header() now checks the shiny new - * CSP_FLAG_CLIENT_HEADER_PARSING_DONE flag instead. - * - * Revision 1.36 2007/03/05 13:25:32 fabiankeil - * - Cosmetical changes for LOG_LEVEL_RE_FILTER messages. - * - Handle "Cookie:" and "Connection:" headers a bit smarter - * (don't crunch them just to recreate them later on). - * - Add another non-standard time format for the cookie - * expiration date detection. - * - Fix a valgrind warning. - * - * Revision 1.35 2007/01/01 19:36:37 fabiankeil - * Integrate a modified version of Wil Mahan's - * zlib patch (PR #895531). - * - * Revision 1.34 2006/12/29 19:08:22 fabiankeil - * Reverted parts of my last commit - * to keep error handling working. - * - * Revision 1.33 2006/12/29 18:04:40 fabiankeil - * Fixed gcc43 conversion warnings. - * - * Revision 1.32 2006/12/06 19:14:23 fabiankeil - * Added prototype for get_destination_from_headers(). - * - * Revision 1.31 2006/08/17 17:15:10 fabiankeil - * - Back to timegm() using GnuPG's replacement if necessary. - * Using mktime() and localtime() could add a on hour offset if - * the randomize factor was big enough to lead to a summer/wintertime - * switch. - * - * - Removed now-useless Privoxy 3.0.3 compatibility glue. - * - * - Moved randomization code into pick_from_range(). - * - * - Changed parse_header_time definition. - * time_t isn't guaranteed to be signed and - * if it isn't, -1 isn't available as error code. - * Changed some variable types in client_if_modified_since() - * because of the same reason. - * - * Revision 1.30 2006/08/14 08:25:19 fabiankeil - * Split filter-headers{} into filter-client-headers{} - * and filter-server-headers{}. - * Added parse_header_time() to share some code. - * Replaced timegm() with mktime(). - * - * Revision 1.29 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.28 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.26.2.1 2002/09/25 14:52:46 oes - * Added basic support for OPTIONS and TRACE HTTP methods: - * - New parser function client_max_forwards which decrements - * the Max-Forwards HTTP header field of OPTIONS and TRACE - * requests by one before forwarding - * - New parser function client_host which extracts the host - * and port information from the HTTP header field if the - * request URI was not absolute - * - Don't crumble and re-add the Host: header, but only generate - * and append if missing - * - * Revision 1.26 2002/05/08 15:59:53 oes - * Changed add_to_iob signature (now returns jb_err) - * - * Revision 1.25 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.24 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.23 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.22 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.21 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.20 2002/02/20 23:15:13 jongfoster - * Parsing functions now handle out-of-memory gracefully by returning - * an error code. - * - * Revision 1.19 2002/01/17 21:03:47 jongfoster - * Moving all our URL and URL pattern parsing code to urlmatch.c. - * - * Revision 1.18 2001/10/26 17:40:23 oes - * Introduced get_header_value() - * Removed client_accept() - * - * Revision 1.17 2001/10/13 12:47:32 joergs - * Removed client_host, added client_host_adder - * - * Revision 1.16 2001/10/07 18:50:16 oes - * Added server_content_encoding, renamed server_transfer_encoding - * - * Revision 1.15 2001/10/07 18:01:55 oes - * Changed server_http11 to server_http - * - * Revision 1.14 2001/10/07 15:45:48 oes - * added client_accept_encoding, client_te, client_accept_encoding_adder - * - * renamed content_type and content_length - * - * fixed client_host and strclean prototypes - * - * Revision 1.13 2001/09/29 12:56:03 joergs - * IJB now changes HTTP/1.1 to HTTP/1.0 in requests and answers. - * - * Revision 1.12 2001/09/13 23:05:50 jongfoster - * Changing the string paramater to the header parsers a "const". - * - * Revision 1.11 2001/07/31 14:46:53 oes - * Added prototype for connection_close_adder - * - * Revision 1.10 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.9 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.8 2001/07/13 14:01:54 oes - * Removed all #ifdef PCRS - * - * Revision 1.7 2001/06/29 13:32:14 oes - * Removed logentry from cancelled commit - * - * Revision 1.6 2001/06/03 19:12:38 oes - * deleted const struct interceptors - * - * Revision 1.5 2001/05/31 21:30:33 jongfoster - * Removed list code - it's now in list.[ch] - * Renamed "permission" to "action", and changed many features - * to use the actions file rather than the global config. - * - * Revision 1.4 2001/05/27 13:19:06 oes - * Patched Joergs solution for the content-length in. - * - * Revision 1.3 2001/05/26 13:39:32 jongfoster - * Only crunches Content-Length header if applying RE filtering. - * Without this fix, Microsoft Windows Update wouldn't work. - * - * Revision 1.2 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.1.1.1 2001/05/15 13:59:01 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/* Used for sed()'s second argument. */ -#define FILTER_CLIENT_HEADERS 0 -#define FILTER_SERVER_HEADERS 1 - -extern long flush_socket(jb_socket fd, struct iob *iob); -extern jb_err add_to_iob(struct client_state *csp, char *buf, long n); -extern jb_err decompress_iob(struct client_state *csp); -extern char *get_header(struct iob *iob); -extern char *get_header_value(const struct list *header_list, const char *header_name); -extern jb_err sed(struct client_state *csp, int filter_server_headers); -extern jb_err update_server_headers(struct client_state *csp); -extern void get_http_time(int time_offset, char *buf, size_t buffer_size); -extern jb_err get_destination_from_headers(const struct list *headers, struct http_request *http); - -#ifdef FEATURE_FORCE_LOAD -extern int strclean(char *string, const char *substring); -#endif /* def FEATURE_FORCE_LOAD */ - -/* Revision control strings from this header and associated .c file */ -extern const char parsers_rcs[]; -extern const char parsers_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef PARSERS_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/pcre/Makefile.in b/external/privoxy/pcre/Makefile.in deleted file mode 100644 index 94edf49..0000000 --- a/external/privoxy/pcre/Makefile.in +++ /dev/null @@ -1,219 +0,0 @@ - -# Makefile.in for PCRE (Perl-Compatible Regular Expression) library. - -#---------------------------------------------------------------------------# -# To build mingw32 DLL uncomment the next two lines. This addition for # -# mingw32 was contributed by <Paul.Sokolovsky(a)technologist.com>. I (Philip # -# Hazel) don't know anything about it! There are some additional targets at # -# the bottom of this Makefile. # -#---------------------------------------------------------------------------# -# -# include dll.mk -# DLL_LDFLAGS=-s - - -#---------------------------------------------------------------------------# -# The next few lines are modified by "configure" to insert data that it is # -# given in its arguments, or which it finds out for itself. # -#---------------------------------------------------------------------------# - -# BINDIR is the directory in which the pcregrep command is installed. -# INCDIR is the directory in which the public header file pcre.h is installed. -# LIBDIR is the directory in which the libraries are installed. -# MANDIR is the directory in which the man pages are installed. -# The pcretest program, as it is a test program, does not get installed -# anywhere. - -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -BINDIR = @bindir@ -LIBDIR = @libdir@ -INCDIR = @includedir@ -MANDIR = @mandir@ - -CC = @CC@ -CFLAGS = @CFLAGS@ -RANLIB = @RANLIB@ -UTF8 = @UTF8@ - -# LIBTOOL defaults to "./libtool", which enables the building of shared -# libraries. If "configure" is called with --disable-shared-libraries, LIBTOOL -# is set to "", which stops shared libraries from being built, and LIBSUFFIX -# is set to "a" instead of "la", which causes the shared libraries not to be -# installed. - -LIBTOOL = @LIBTOOL@ -LIBSUFFIX = @LIBSUFFIX@ - -# These are the version numbers for the shared libraries - -PCRELIBVERSION = @PCRE_LIB_VERSION@ -PCREPOSIXLIBVERSION = @PCRE_POSIXLIB_VERSION@ - - -#---------------------------------------------------------------------------# -# A copy of install-sh is in this distribution and is used by default. # -#---------------------------------------------------------------------------# - -INSTALL = ./install-sh -c -INSTALL_DATA = ${INSTALL} -m 644 - - -#---------------------------------------------------------------------------# -# For almost all systems, the command to create a library is "ar cq", but # -# there is at least one where it is different, so this command must be # -# configurable. However, I haven't got round to learning how to make # -# "configure" find this out for itself. It is necessary to use a command # -# such as "make AR='ar -rc'" if you need to vary this. The setting of AR is # -# *not* passed over to ./ltconfig, because it does its own setting up. # -#---------------------------------------------------------------------------# - -AR = ar cq - - -############################################################################## - - -OBJ = maketables.o get.o study.o pcre.o -LOBJ = maketables.lo get.lo study.lo pcre.lo - -all: libtool libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest pcregrep - -libtool: config.guess config.sub ltconfig ltmain.sh - @if test "$(LIBTOOL)" = "./libtool"; then \ - echo '--- Building libtool ---'; \ - CC=$(CC) CFLAGS='$(CFLAGS)' RANLIB='$(RANLIB)' ./ltconfig ./ltmain.sh; \ - echo '--- Built libtool ---'; fi - -pcregrep: libpcre.$(LIBSUFFIX) pcregrep.o - @echo ' ' - @echo '--- Building pcregrep utility' - @echo ' ' - $(LIBTOOL) $(CC) $(CFLAGS) -o pcregrep pcregrep.o libpcre.$(LIBSUFFIX) - -pcretest: libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest.o - @echo ' ' - @echo '--- Building pcretest testing program' - @echo ' ' - $(LIBTOOL) $(PURIFY) $(CC) $(CFLAGS) -o pcretest pcretest.o \ - libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) - -libpcre.a: $(OBJ) - @echo ' ' - @echo '--- Building static library: libpcre' - @echo ' ' - -rm -f libpcre.a - $(AR) libpcre.a $(OBJ) - $(RANLIB) libpcre.a - -libpcre.la: $(OBJ) - @echo ' ' - @echo '--- Building shared library: libpcre' - @echo ' ' - -rm -f libpcre.la - ./libtool $(CC) -version-info '$(PCRELIBVERSION)' -o libpcre.la -rpath $(LIBDIR) $(LOBJ) - -libpcreposix.a: pcreposix.o - @echo ' ' - @echo '--- Building static library: libpcreposix' - @echo ' ' - -rm -f libpcreposix.a - $(AR) libpcreposix.a pcreposix.o - $(RANLIB) libpcreposix.a - -libpcreposix.la: pcreposix.o - @echo ' ' - @echo '--- Building shared library: libpcreposix' - @echo ' ' - -rm -f libpcreposix.la - ./libtool $(CC) -version-info '$(PCREPOSIXLIBVERSION)' -o libpcreposix.la -rpath $(LIBDIR) pcreposix.lo - -pcre.o: chartables.c pcre.c pcre.h internal.h config.h Makefile - $(LIBTOOL) $(CC) -c $(CFLAGS) $(UTF8) pcre.c - -pcreposix.o: pcreposix.c pcreposix.h internal.h pcre.h config.h Makefile - $(LIBTOOL) $(CC) -c $(CFLAGS) pcreposix.c - -maketables.o: maketables.c pcre.h internal.h config.h Makefile - $(LIBTOOL) $(CC) -c $(CFLAGS) maketables.c - -get.o: get.c pcre.h internal.h config.h Makefile - $(LIBTOOL) $(CC) -c $(CFLAGS) get.c - -study.o: study.c pcre.h internal.h config.h Makefile - $(LIBTOOL) $(CC) -c $(CFLAGS) $(UTF8) study.c - -pcretest.o: pcretest.c pcre.h config.h Makefile - $(CC) -c $(CFLAGS) $(UTF8) pcretest.c - -pcregrep.o: pcregrep.c pcre.h Makefile config.h - $(CC) -c $(CFLAGS) $(UTF8) pcregrep.c - -# An auxiliary program makes the default character table source - -chartables.c: dftables - ./dftables >chartables.c - -dftables: dftables.c maketables.c pcre.h internal.h config.h Makefile - $(CC) -o dftables $(CFLAGS) dftables.c - -install: all - $(LIBTOOL) $(INSTALL_DATA) libpcre.$(LIBSUFFIX) $(DESTDIR)/$(LIBDIR)/libpcre.$(LIBSUFFIX) - $(LIBTOOL) $(INSTALL_DATA) libpcreposix.$(LIBSUFFIX) $(DESTDIR)/$(LIBDIR)/libpcreposix.$(LIBSUFFIX) - $(INSTALL_DATA) pcre.h $(DESTDIR)/$(INCDIR)/pcre.h - $(INSTALL_DATA) pcreposix.h $(DESTDIR)/$(INCDIR)/pcreposix.h - $(INSTALL_DATA) doc/pcre.3 $(DESTDIR)/$(MANDIR)/man3/pcre.3 - $(INSTALL_DATA) doc/pcreposix.3 $(DESTDIR)/$(MANDIR)/man3/pcreposix.3 - $(INSTALL_DATA) doc/pcregrep.1 $(DESTDIR)/$(MANDIR)/man1/pcregrep.1 - @if test "$(LIBTOOL)" = "./libtool"; then \ - echo ' '; \ - echo '--- Rebuilding pcregrep to use installed shared library ---'; \ - echo $(CC) $(CFLAGS) -o pcregrep pcregrep.o -L$(DESTDIR)/$(LIBDIR) -lpcre; \ - $(CC) $(CFLAGS) -o pcregrep pcregrep.o -L$(DESTDIR)/$(LIBDIR) -lpcre; \ - echo '--- Rebuilding pcretest to use installed shared library ---'; \ - echo $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(DESTDIR)/$(LIBDIR) -lpcre -lpcreposix; \ - $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(DESTDIR)/$(LIBDIR) -lpcre -lpcreposix; \ - fi - $(INSTALL) pcregrep $(DESTDIR)/$(BINDIR)/pcregrep - $(INSTALL) pcre-config $(DESTDIR)/$(BINDIR)/pcre-config - -# We deliberately omit dftables and chartables.c from 'make clean'; once made -# chartables.c shouldn't change, and if people have edited the tables by hand, -# you don't want to throw them away. - -clean:; -rm -rf *.o *.lo *.a *.la .libs pcretest pcregrep testtry - -# But "make distclean" should get back to a virgin distribution - -distclean: clean - -rm -f chartables.c libtool pcre-config pcre.h \ - Makefile config.h config.status config.log config.cache - -check: runtest - -test: runtest - -runtest: all - ./RunTest - -######## MINGW32 ############### MINGW32 ############### MINGW32 ############# - -# This addition for mingw32 was contributed by Paul Sokolovsky -# <Paul.Sokolovsky(a)technologist.com>. I (PH) don't know anything about it! - -dll: _dll libpcre.dll.a pcregrep_d pcretest_d - -_dll: - $(MAKE) CFLAGS=-DSTATIC pcre.dll - -pcre.dll: $(OBJ) pcreposix.o pcre.def -libpcre.dll.a: pcre.def - -pcregrep_d: libpcre.dll.a pcregrep.o - $(CC) $(CFLAGS) -L. -o pcregrep pcregrep.o -lpcre.dll - -pcretest_d: libpcre.dll.a pcretest.o - $(PURIFY) $(CC) $(CFLAGS) -L. -o pcretest pcretest.o -lpcre.dll - -# End diff --git a/external/privoxy/pcre/RunTest.in b/external/privoxy/pcre/RunTest.in deleted file mode 100644 index 6e4eb08..0000000 --- a/external/privoxy/pcre/RunTest.in +++ /dev/null @@ -1,148 +0,0 @@ -#! /bin/sh - -# This file is generated by configure from RunTest.in. Make any changes -# to that file. - -# Run PCRE tests - -cf=diff - -# Select which tests to run; if no selection, run all - -do1=no -do2=no -do3=no -do4=no -do5=no -do6=no - -while [ $# -gt 0 ] ; do - case $1 in - 1) do1=yes;; - 2) do2=yes;; - 3) do3=yes;; - 4) do4=yes;; - 5) do5=yes;; - 6) do6=yes;; - *) echo "Unknown test number $1"; exit 1;; - esac - shift -done - -if [ "@UTF8@" = "" ] ; then - if [ $do5 = yes ] ; then - echo "Can't run test 5 because UFT8 support is not configured" - exit 1 - fi - if [ $do6 = yes ] ; then - echo "Can't run test 6 because UFT8 support is not configured" - exit 1 - fi -fi - -if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a\ - $do5 = no -a $do6 = no ] ; then - do1=yes - do2=yes - do3=yes - do4=yes - if [ "@UTF8@" != "" ] ; then do5=yes; fi - if [ "@UTF8@" != "" ] ; then do6=yes; fi -fi - -# Primary test, Perl-compatible - -if [ $do1 = yes ] ; then - echo "Testing main functionality (Perl compatible)" - ./pcretest testdata/testinput1 testtry - if [ $? = 0 ] ; then - $cf testtry testdata/testoutput1 - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi -fi - -# PCRE tests that are not Perl-compatible - API & error tests, mostly - -if [ $do2 = yes ] ; then - echo "Testing API and error handling (not Perl compatible)" - ./pcretest -i testdata/testinput2 testtry - if [ $? = 0 ] ; then - $cf testtry testdata/testoutput2 - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi -fi - -# Additional Perl-compatible tests for Perl 5.005's new features - -if [ $do3 = yes ] ; then - echo "Testing Perl 5.005 features (Perl 5.005 compatible)" - ./pcretest testdata/testinput3 testtry - if [ $? = 0 ] ; then - $cf testtry testdata/testoutput3 - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi -fi - -if [ $do1 = yes -a $do2 = yes -a $do3 = yes ] ; then - echo " " - echo "The three main tests all ran OK" - echo " " -fi - -# Locale-specific tests, provided the "fr" locale is available - -if [ $do4 = yes ] ; then - locale -a | grep '^fr$' >/dev/null - if [ $? -eq 0 ] ; then - echo "Testing locale-specific features (using 'fr' locale)" - ./pcretest testdata/testinput4 testtry - if [ $? = 0 ] ; then - $cf testtry testdata/testoutput4 - if [ $? != 0 ] ; then - echo " " - echo "Locale test did not run entirely successfully." - echo "This usually means that there is a problem with the locale" - echo "settings rather than a bug in PCRE." - else - echo "Locale test ran OK" - fi - echo " " - else exit 1 - fi - else - echo "Cannot test locale-specific features - 'fr' locale not found," - echo "or the \"locale\" command is not available to check for it." - echo " " - fi -fi - -# Additional tests for UTF8 support - -if [ $do5 = yes ] ; then - echo "Testing experimental, incomplete UTF8 support (Perl compatible)" - ./pcretest testdata/testinput5 testtry - if [ $? = 0 ] ; then - $cf testtry testdata/testoutput5 - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo "UTF8 test ran OK" - echo " " -fi - -if [ $do6 = yes ] ; then - echo "Testing API and internals for UTF8 support (not Perl compatible)" - ./pcretest testdata/testinput6 testtry - if [ $? = 0 ] ; then - $cf testtry testdata/testoutput6 - if [ $? != 0 ] ; then exit 1; fi - else exit 1 - fi - echo "UTF8 internals test ran OK" - echo " " -fi - -# End diff --git a/external/privoxy/pcre/chartables.c b/external/privoxy/pcre/chartables.c deleted file mode 100644 index 9055da2..0000000 --- a/external/privoxy/pcre/chartables.c +++ /dev/null @@ -1,183 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* This file is automatically written by the dftables auxiliary -program. If you edit it by hand, you might like to edit the Makefile to -prevent its ever being regenerated. - -This file is #included in the compilation of pcre.c to build the default -character tables which are used when no tables are passed to the compile -function. */ - -static unsigned char pcre_default_tables[] = { - -/* This table is a lower casing table. */ - - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122, 91, 92, 93, 94, 95, - 96, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122,123,124,125,126,127, - 128,129,130,131,132,133,134,135, - 136,137,138,139,140,141,142,143, - 144,145,146,147,148,149,150,151, - 152,153,154,155,156,157,158,159, - 160,161,162,163,164,165,166,167, - 168,169,170,171,172,173,174,175, - 176,177,178,179,180,181,182,183, - 184,185,186,187,188,189,190,191, - 192,193,194,195,196,197,198,199, - 200,201,202,203,204,205,206,207, - 208,209,210,211,212,213,214,215, - 216,217,218,219,220,221,222,223, - 224,225,226,227,228,229,230,231, - 232,233,234,235,236,237,238,239, - 240,241,242,243,244,245,246,247, - 248,249,250,251,252,253,254,255, - -/* This table is a case flipping table. */ - - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122, 91, 92, 93, 94, 95, - 96, 65, 66, 67, 68, 69, 70, 71, - 72, 73, 74, 75, 76, 77, 78, 79, - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90,123,124,125,126,127, - 128,129,130,131,132,133,134,135, - 136,137,138,139,140,141,142,143, - 144,145,146,147,148,149,150,151, - 152,153,154,155,156,157,158,159, - 160,161,162,163,164,165,166,167, - 168,169,170,171,172,173,174,175, - 176,177,178,179,180,181,182,183, - 184,185,186,187,188,189,190,191, - 192,193,194,195,196,197,198,199, - 200,201,202,203,204,205,206,207, - 208,209,210,211,212,213,214,215, - 216,217,218,219,220,221,222,223, - 224,225,226,227,228,229,230,231, - 232,233,234,235,236,237,238,239, - 240,241,242,243,244,245,246,247, - 248,249,250,251,252,253,254,255, - -/* This table contains bit maps for various character classes. -Each map is 32 bytes long and the bits run from the least -significant end of each byte. The classes that have their own -maps are: space, xdigit, digit, upper, lower, word, graph -print, punct, and cntrl. Other classes are built from combinations. */ - - 0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc, - 0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - -/* This table identifies various classes of character by individual bits: - 0x01 white space character - 0x02 letter - 0x04 decimal digit - 0x08 hexadecimal digit - 0x10 alphanumeric or '_' - 0x80 regular expression metacharacter or binary zero -*/ - - 0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */ - 0x00,0x01,0x01,0x01,0x01,0x01,0x00,0x00, /* 8- 15 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ - 0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /* - ' */ - 0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /* ( - / */ - 0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */ - 0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /* 8 - ? */ - 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* @ - G */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* H - O */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* P - W */ - 0x12,0x12,0x12,0x80,0x00,0x00,0x80,0x10, /* X - _ */ - 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* ` - g */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* h - o */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* p - w */ - 0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /* x -127 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */ - -/* End of chartables.c */ diff --git a/external/privoxy/pcre/config.guess b/external/privoxy/pcre/config.guess deleted file mode 100644 index e1b5871..0000000 --- a/external/privoxy/pcre/config.guess +++ /dev/null @@ -1,1121 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 -# Free Software Foundation, Inc. -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Written by Per Bothner <bothner(a)cygnus.com>. -# The master version of this file is at the FSF in /home/gd/gnu/lib. -# Please send patches to <autoconf-patches(a)gnu.org>. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit system type (host/target name). -# -# Only a few systems have been added to this list; please add others -# (but try to keep the structure clean). -# - -# Use $HOST_CC if defined. $CC may point to a cross-compiler -if test x"$CC_FOR_BUILD" = x; then - if test x"$HOST_CC" != x; then - CC_FOR_BUILD="$HOST_CC" - else - if test x"$CC" != x; then - CC_FOR_BUILD="$CC" - else - CC_FOR_BUILD=cc - fi - fi -fi - - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi(a)noc.rutgers.edu 8/24/94.) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -dummy=dummy-$$ -trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15 - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - cat <<EOF >$dummy.s - .globl main - .ent main -main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 - .end main -EOF - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - ./$dummy - case "$?" in - 7) - UNAME_MACHINE="alpha" - ;; - 15) - UNAME_MACHINE="alphaev5" - ;; - 14) - UNAME_MACHINE="alphaev56" - ;; - 10) - UNAME_MACHINE="alphapca56" - ;; - 16) - UNAME_MACHINE="alphaev6" - ;; - esac - fi - rm -f $dummy.s $dummy - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-cbm-sysv4 - exit 0;; - amiga:NetBSD:*:*) - echo m68k-cbm-netbsd${UNAME_RELEASE} - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; - arc64:OpenBSD:*:*) - echo mips64el-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hkmips:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - arm32:NetBSD:*:*) - echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - SR2?01:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit 0;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee(a)wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit 0 ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit 0 ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; - atari*:NetBSD:*:*) - echo m68k-atari-netbsd${UNAME_RELEASE} - exit 0 ;; - atari*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; - sun3*:NetBSD:*:*) - echo m68k-sun-netbsd${UNAME_RELEASE} - exit 0 ;; - sun3*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:NetBSD:*:*) - echo m68k-apple-netbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; - macppc:NetBSD:*:*) - echo powerpc-apple-netbsd${UNAME_RELEASE} - exit 0 ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy \ - && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` \ - && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i?86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - sed 's/^ //' << EOF >$dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:4) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` - if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=4.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[34678]??:HP-UX:*:*) - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - sed 's/^ //' << EOF >$dummy.c - #include <stdlib.h> - #include <unistd.h> - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` - rm -f $dummy.c $dummy - esac - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - sed 's/^ //' << EOF >$dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - *9??*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - i?86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - hppa*:OpenBSD:*:*) - echo hppa-unknown-openbsd - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*X-MP:*:*:*) - echo xmp-cray-unicos - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} - exit 0 ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*$[A-Z]90$/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ - exit 0 ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} - exit 0 ;; - CRAY*T3E:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} - exit 0 ;; - CRAY-2:*:*:*) - echo cray2-cray-unicos - exit 0 ;; - F300:UNIX_System_V:*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - F301:UNIX_System_V:*:*) - echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` - exit 0 ;; - hp3[0-9][05]:NetBSD:*:*) - echo m68k-hp-netbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - i?86:BSD/386:*:* | i?86:BSD/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - if test -x /usr/bin/objformat; then - if test "elf" = "`/usr/bin/objformat`"; then - echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` - exit 0 - fi - fi - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - *:NetBSD:*:*) - echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i386-pc-interix - exit 0 ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit 0 ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - *:GNU:*:*) - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - *:Linux:*:*) - - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - ld_help_string=`cd /; ld --help 2>&1` - ld_supported_emulations=`echo $ld_help_string \ - | sed -ne '/supported emulations:/!d - s/[ ][ ]*/ /g - s/.*supported emulations: *// - s/ .*// - p'` - case "$ld_supported_emulations" in - *ia64) - echo "${UNAME_MACHINE}-unknown-linux" - exit 0 - ;; - i?86linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 - ;; - i?86coff) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 - ;; - sparclinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - armlinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - elf32arm*) - echo "${UNAME_MACHINE}-unknown-linux-gnu" - exit 0 - ;; - armelf_linux*) - echo "${UNAME_MACHINE}-unknown-linux-gnu" - exit 0 - ;; - m68klinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - elf32ppc) - # Determine Lib Version - cat >$dummy.c <<EOF -#include <features.h> -#if defined(__GLIBC__) -extern char __libc_version[]; -extern char __libc_release[]; -#endif -main(argc, argv) - int argc; - char *argv[]; -{ -#if defined(__GLIBC__) - printf("%s %s\n", __libc_version, __libc_release); -#else - printf("unkown\n"); -#endif - return 0; -} -EOF - LIBC="" - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null - if test "$?" = 0 ; then - ./$dummy | grep 1\.99 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f $dummy.c $dummy - echo powerpc-unknown-linux-gnu${LIBC} - exit 0 - ;; - esac - - if test "${UNAME_MACHINE}" = "alpha" ; then - sed 's/^ //' <<EOF >$dummy.s - .globl main - .ent main - main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 - .end main -EOF - LIBC="" - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - ./$dummy - case "$?" in - 7) - UNAME_MACHINE="alpha" - ;; - 15) - UNAME_MACHINE="alphaev5" - ;; - 14) - UNAME_MACHINE="alphaev56" - ;; - 10) - UNAME_MACHINE="alphapca56" - ;; - 16) - UNAME_MACHINE="alphaev6" - ;; - esac - - objdump --private-headers $dummy | \ - grep ld.so.1 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f $dummy.s $dummy - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 - elif test "${UNAME_MACHINE}" = "mips" ; then - cat >$dummy.c <<EOF -#ifdef __cplusplus - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif -#ifdef __MIPSEB__ - printf ("%s-unknown-linux-gnu\n", argv[1]); -#endif -#ifdef __MIPSEL__ - printf ("%sel-unknown-linux-gnu\n", argv[1]); -#endif - return 0; -} -EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - else - # Either a pre-BFD a.out linker (linux-gnuoldld) - # or one that does not give us useful --help. - # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. - # If ld does not provide *any* "supported emulations:" - # that means it is gnuoldld. - echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" - test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 - - case "${UNAME_MACHINE}" in - i?86) - VENDOR=pc; - ;; - *) - VENDOR=unknown; - ;; - esac - # Determine whether the default compiler is a.out or elf - cat >$dummy.c <<EOF -#include <features.h> -#ifdef __cplusplus - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif -#ifdef __ELF__ -# ifdef __GLIBC__ -# if __GLIBC__ >= 2 - printf ("%s-${VENDOR}-linux-gnu\n", argv[1]); -# else - printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); -# endif -# else - printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); -# endif -#else - printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]); -#endif - return 0; -} -EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - fi ;; -# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions -# are messed up and put the nodename in both sysname and nodename. - i?86:DYNIX/ptx:4*:*) - echo i386-sequent-sysv4 - exit 0 ;; - i?86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; - i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit 0 ;; - i?86:*:5:7*) - # Fixed at (any) Pentium or better - UNAME_MACHINE=i586 - if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then - echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} - fi - exit 0 ;; - i?86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-pc-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit 0 ;; - pc:*:*:*) - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit 0 ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <Richard.M.Bartel(a)ccMail.Census.GOV> - echo i586-unisys-sysv4 - exit 0 ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes <hewes(a)openmarket.com>. - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit 0 ;; - *:*:*:FTX*) - # From seanf(a)swdc.stratus.com. - echo i860-stratus-sysv4 - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; - news*:NEWS-OS:*:6*) - echo mips-sony-newsos6 - exit 0 ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit 0 ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit 0 ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit 0 ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:QNX:*:4*) - echo i386-qnx-qnx${UNAME_VERSION} - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -cat >$dummy.c <<EOF -#ifdef _SEQUENT_ -# include <sys/types.h> -# include <sys/utsname.h> -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include <sys/param.h> - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach $[0-9]*$.*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -#if !defined (ultrix) - printf ("vax-dec-bsd\n"); exit (0); -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0 -rm -f $dummy.c $dummy - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -#echo '(Unable to guess system type)' 1>&2 - -exit 1 diff --git a/external/privoxy/pcre/config.h b/external/privoxy/pcre/config.h deleted file mode 100644 index c767cbb..0000000 --- a/external/privoxy/pcre/config.h +++ /dev/null @@ -1,5 +0,0 @@ - -/* For Privoxy, we just use Privoxy's config.h */ - -#include "../config.h" - diff --git a/external/privoxy/pcre/config.in b/external/privoxy/pcre/config.in deleted file mode 100644 index 02f4259..0000000 --- a/external/privoxy/pcre/config.in +++ /dev/null @@ -1,33 +0,0 @@ - -/* On Unix systems config.in is converted by configure into config.h. PCRE is -written in Standard C, but there are a few non-standard things it can cope -with, allowing it to run on SunOS4 and other "close to standard" systems. - -On a non-Unix system you should just copy this file into config.h and change -the definitions of HAVE_STRERROR and HAVE_MEMMOVE to 1. Unfortunately, because -of the way autoconf works, these cannot be made the defaults. If your system -has bcopy() and not memmove(), change the definition of HAVE_BCOPY instead of -HAVE_MEMMOVE. If your system has neither bcopy() nor memmove(), leave them both -as 0; an emulation function will be used. */ - -/* Define to empty if the keyword does not work. */ - -#undef const - -/* Define to `unsigned' if <stddef.h> doesn't define size_t. */ - -#undef size_t - -/* The following two definitions are mainly for the benefit of SunOS4, which -doesn't have the strerror() or memmove() functions that should be present in -all Standard C libraries. The macros HAVE_STRERROR and HAVE_MEMMOVE should -normally be defined with the value 1 for other systems, but unfortunately we -can't make this the default because "configure" files generated by autoconf -will only change 0 to 1; they won't change 1 to 0 if the functions are not -found. If HAVE_MEMMOVE is set to 1, the value of HAVE_BCOPY is not relevant. */ - -#define HAVE_STRERROR 0 -#define HAVE_MEMMOVE 0 -#define HAVE_BCOPY 0 - -/* End */ diff --git a/external/privoxy/pcre/config.sub b/external/privoxy/pcre/config.sub deleted file mode 100644 index 28426bb..0000000 --- a/external/privoxy/pcre/config.sub +++ /dev/null @@ -1,1232 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script, version 1.1. -# Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc. -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -if [ x$1 = x ] -then - echo Configuration name missing. 1>&2 - echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 - echo "or $0 ALIAS" 1>&2 - echo where ALIAS is a recognized configuration type. 1>&2 - exit 1 -fi - -# First pass through any local machine types. -case $1 in - *local*) - echo $1 - exit 0 - ;; - *) - ;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\2/'` -case $maybe_os in - linux-gnu*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ - | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ - | 580 | i960 | h8300 \ - | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ - | alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \ - | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \ - | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \ - | mips64orion | mips64orionel | mipstx39 | mipstx39el \ - | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ - | mips64vr5000 | miprs64vr5000el | mcore \ - | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \ - | thumb | d10v | fr30) - basic_machine=$basic_machine-unknown - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl) - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i[34567]86) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - # FIXME: clean up the formatting here. - vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ - | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ - | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ - | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ - | xmp-* | ymp-* \ - | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \ - | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \ - | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ - | clipper-* | orion-* \ - | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ - | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \ - | mips64el-* | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ - | mipstx39-* | mipstx39el-* | mcore-* \ - | f301-* | armv*-* | t3e-* \ - | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ - | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* ) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-cbm - ;; - amigaos | amigados) - basic_machine=m68k-cbm - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-cbm - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | ymp) - basic_machine=ymp-cray - os=-unicos - ;; - cray2) - basic_machine=cray2-cray - os=-unicos - ;; - [ctj]90-cray) - basic_machine=c90-cray - os=-unicos - ;; - crds | unos) - basic_machine=m68k-crds - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i[34567]86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i[34567]86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i[34567]86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i[34567]86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - i386-go32 | go32) - basic_machine=i386-unknown - os=-go32 - ;; - i386-mingw32 | mingw32) - basic_machine=i386-unknown - os=-mingw32 - ;; - i386-qnx | qnx) - basic_machine=i386-qnx - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mipsel*-linux*) - basic_machine=mipsel-unknown - os=-linux-gnu - ;; - mips*-linux*) - basic_machine=mips-unknown - os=-linux-gnu - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - msdos) - basic_machine=i386-unknown - os=-msdos - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - np1) - basic_machine=np1-gould - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | k5 | k6 | nexen) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86) - basic_machine=i686-pc - ;; - pentiumii | pentium2) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexen-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=rs6000-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sparclite-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=t3e-cray - os=-unicos - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xmp) - basic_machine=xmp-cray - os=-unicos - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - mips) - if [ x$os = x-linux-gnu ]; then - basic_machine=mips-unknown - else - basic_machine=mips-mips - fi - ;; - romp) - basic_machine=romp-ibm - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sparc | sparcv9) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - c4x*) - basic_machine=c4x-none - os=-coff - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -ns2 ) - os=-nextstep2 - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -qnx) - os=-qnx4 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -*MiNT) - os=-mint - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f301-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -vxsim* | -vxworks*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -*MiNT) - vendor=atari - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os diff --git a/external/privoxy/pcre/configure b/external/privoxy/pcre/configure deleted file mode 100644 index fbd3831..0000000 --- a/external/privoxy/pcre/configure +++ /dev/null @@ -1,1568 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --disable-shared build PCRE as a static library" -ac_help="$ac_help - --enable-utf8 enable UTF8 support (incomplete)" - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # The list generated by autoconf has been trimmed to remove many - # options that are totally irrelevant to PCRE (e.g. relating to X), - # or are not supported by its Makefile. - # The list generated by autoconf has been trimmed to remove many - # options that are totally irrelevant to PCRE (e.g. relating to X), - # or are not supported by its Makefile. - # The list generated by autoconf has been trimmed to remove many - # options that are totally irrelevant to PCRE (e.g. relating to X), - # or are not supported by its Makefile. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: ./configure [options] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --mandir=DIR man documentation in DIR [PREFIX/man] -EOF - cat << EOF -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=dftables.c - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%$[^/]$/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi(a)caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - - - - - -PCRE_MAJOR=3 -PCRE_MINOR=4 -PCRE_DATE=22-Aug-2000 -PCRE_VERSION=${PCRE_MAJOR}.${PCRE_MINOR} - - -PCRE_LIB_VERSION=0:1:0 -PCRE_POSIXLIB_VERSION=0:0:0 - - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:546: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:576: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:627: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:659: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 670 "configure" -#include "confdefs.h" - -main(){return(0);} -EOF -if { (eval echo configure:675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:701: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:706: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi - -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:734: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi - -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:768: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:798: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext <<EOF -#line 813 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext <<EOF -#line 830 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -nologo -E" - cat > conftest.$ac_ext <<EOF -#line 847 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp -fi -rm -f conftest* -fi -rm -f conftest* -fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" -fi - CPP="$ac_cv_prog_CPP" -else - ac_cv_prog_CPP="$CPP" -fi -echo "$ac_t""$CPP" 1>&6 - -echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:878: checking for ANSI C header files" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 883 "configure" -#include "confdefs.h" -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:891: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - ac_cv_header_stdc=yes -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -cat > conftest.$ac_ext <<EOF -#line 908 "configure" -#include "confdefs.h" -#include <string.h> -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -cat > conftest.$ac_ext <<EOF -#line 926 "configure" -#include "confdefs.h" -#include <stdlib.h> -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -if test "$cross_compiling" = yes; then - : -else - cat > conftest.$ac_ext <<EOF -#line 947 "configure" -#include "confdefs.h" -#include <ctype.h> -#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int main () { int i; for (i = 0; i < 256; i++) -if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); -exit (0); } - -EOF -if { (eval echo configure:958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then - : -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_header_stdc=no -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_header_stdc" 1>&6 -if test $ac_cv_header_stdc = yes; then - cat >> confdefs.h <<\EOF -#define STDC_HEADERS 1 -EOF - -fi - -for ac_hdr in limits.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:985: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 990 "configure" -#include "confdefs.h" -#include <$ac_hdr> -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <<EOF -#define $ac_tr_hdr 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi -done - - - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1024: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1029 "configure" -#include "confdefs.h" - -int main() { - -/* Ultrix mips cc rejects this. */ -typedef int charset[2]; const charset x; -/* SunOS 4.1.1 cc rejects this. */ -char const *const *ccp; -char **p; -/* NEC SVR4.0.2 mips cc rejects this. */ -struct point {int x, y;}; -static struct point const zero = {0,0}; -/* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in an arm - of an if-expression whose if-part is not a constant expression */ -const char *g = "string"; -ccp = &g + (g ? g-g : 0); -/* HPUX 7.0 cc rejects these. */ -++ccp; -p = (char**) ccp; -ccp = (char const *const *) p; -{ /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; -} -{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; -} -{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; -} -{ /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} - -; return 0; } -EOF -if { (eval echo configure:1078: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_const=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 -if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF - -fi - -echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1099: checking for size_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1104 "configure" -#include "confdefs.h" -#include <sys/types.h> -#if STDC_HEADERS -#include <stdlib.h> -#include <stddef.h> -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_size_t=yes -else - rm -rf conftest* - ac_cv_type_size_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_size_t" 1>&6 -if test $ac_cv_type_size_t = no; then - cat >> confdefs.h <<\EOF -#define size_t unsigned -EOF - -fi - - - -for ac_func in bcopy memmove strerror -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1136: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1141 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if { (eval echo configure:1164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi -done - - - -LIBTOOL=./libtool -LIBSUFFIX=la -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - if test "$enableval" = "no"; then - LIBTOOL= - LIBSUFFIX=a -fi - -fi - - - -# Check whether --enable-utf8 or --disable-utf8 was given. -if test "${enable_utf8+set}" = set; then - enableval="$enable_utf8" - if test "$enableval" = "yes"; then - UTF8=-DSUPPORT_UTF8 -fi - -fi - - - - - - - - - - - - - - - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\$[a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\$=\$.*\$/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^$[a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*$=$.*$/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -DEFS=-DHAVE_CONFIG_H - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <<EOF -#! /bin/sh -# Generated automatically by configure. -# Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir - -trap 'rm -fr `echo "Makefile pcre.h:pcre.in pcre-config:pcre-config.in RunTest:RunTest.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS <<EOF - -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@CC@%$CC%g -s%@RANLIB@%$RANLIB%g -s%@CPP@%$CPP%g -s%@HAVE_MEMMOVE@%$HAVE_MEMMOVE%g -s%@HAVE_STRERROR@%$HAVE_STRERROR%g -s%@LIBTOOL@%$LIBTOOL%g -s%@LIBSUFFIX@%$LIBSUFFIX%g -s%@UTF8@%$UTF8%g -s%@PCRE_MAJOR@%$PCRE_MAJOR%g -s%@PCRE_MINOR@%$PCRE_MINOR%g -s%@PCRE_DATE@%$PCRE_DATE%g -s%@PCRE_VERSION@%$PCRE_VERSION%g -s%@PCRE_LIB_VERSION@%$PCRE_LIB_VERSION%g -s%@PCRE_POSIXLIB_VERSION@%$PCRE_POSIXLIB_VERSION%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <<EOF - -CONFIG_FILES=\${CONFIG_FILES-"Makefile pcre.h:pcre.in pcre-config:pcre-config.in RunTest:RunTest.in"} -EOF -cat >> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s%^$[ ]*$#$[ ]*define[ ][ ]*$' -ac_dB='$[ ][ ]*$[^ ]*%\1#\2' -ac_dC='\3' -ac_dD='%g' -# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". -ac_uA='s%^$[ ]*$#$[ ]*$undef$[ ][ ]*$' -ac_uB='$[ ]$%\1#\2define\3' -ac_uC=' ' -ac_uD='\4%g' -# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_eA='s%^$[ ]*$#$[ ]*$undef$[ ][ ]*$' -ac_eB='$%\1#\2define\3' -ac_eC=' ' -ac_eD='%g' - -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <<EOF - CONFIG_HEADERS="config.h:config.in" -EOF -cat >> $CONFIG_STATUS <<\EOF -fi -for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - echo creating $ac_file - - rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in - -EOF - -# Transform confdefs.h into a sed script conftest.vals that substitutes -# the proper values into config.h.in to produce config.h. And first: -# Protect against being on the right side of a sed subst in config.status. -# Protect against being in an unquoted here document in config.status. -rm -f conftest.vals -cat > conftest.hdr <<\EOF -s/[\\&%]/\\&/g -s%[\\$`]%\\&%g -s%#define $[A-Za-z_][A-Za-z0-9_]*$ *$.*$%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp -s%ac_d%ac_u%gp -s%ac_u%ac_e%gp -EOF -sed -n -f conftest.hdr confdefs.h > conftest.vals -rm -f conftest.hdr - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >> conftest.vals <<\EOF -s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% -EOF - -# Break up conftest.vals because some shells have a limit on -# the size of here documents, and old seds have small limits too. - -rm -f conftest.tail -while : -do - ac_lines=`grep -c . conftest.vals` - # grep -c gives empty output for an empty file on some AIX systems. - if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi - # Write a limited-size here document to conftest.frag. - echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS - echo 'CEOF - sed -f conftest.frag conftest.in > conftest.out - rm -f conftest.in - mv conftest.out conftest.in -' >> $CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail - rm -f conftest.vals - mv conftest.tail conftest.vals -done -rm -f conftest.vals - -cat >> $CONFIG_STATUS <<\EOF - rm -f conftest.frag conftest.h - echo "/* $ac_file. Generated automatically by configure. */" > conftest.h - cat conftest.in >> conftest.h - rm -f conftest.in - if cmp -s $ac_file conftest.h 2>/dev/null; then - echo "$ac_file is unchanged" - rm -f conftest.h - else - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - fi - rm -f $ac_file - mv conftest.h $ac_file - fi -fi; done - -EOF -cat >> $CONFIG_STATUS <<EOF - -EOF -cat >> $CONFIG_STATUS <<\EOF -chmod a+x RunTest pcre-config -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - diff --git a/external/privoxy/pcre/configure.in b/external/privoxy/pcre/configure.in deleted file mode 100644 index c98387d..0000000 --- a/external/privoxy/pcre/configure.in +++ /dev/null @@ -1,85 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. - -dnl This is required at the start; the name is the name of a file -dnl it should be seeing, to verify it is in the same directory. - -AC_INIT(dftables.c) - -dnl Arrange to build config.h from config.in. Note that pcre.h is -dnl built differently, as it is just a "substitution" file. -dnl Manual says this macro should come right after AC_INIT. -AC_CONFIG_HEADER(config.h:config.in) - -dnl Provide the current PCRE version information. Do not use numbers -dnl with leading zeros for the minor version, as they end up in a C -dnl macro, and may be treated as octal constants. Stick to single -dnl digits for minor numbers less than 10. There are unlikely to be -dnl that many releases anyway. - -PCRE_MAJOR=3 -PCRE_MINOR=4 -PCRE_DATE=22-Aug-2000 -PCRE_VERSION=${PCRE_MAJOR}.${PCRE_MINOR} - -dnl Provide versioning information for libtool shared libraries that -dnl are built by default on Unix systems. - -PCRE_LIB_VERSION=0:1:0 -PCRE_POSIXLIB_VERSION=0:0:0 - -dnl Checks for programs. - -AC_PROG_CC -AC_PROG_RANLIB - -dnl Checks for header files. - -AC_HEADER_STDC -AC_CHECK_HEADERS(limits.h) - -dnl Checks for typedefs, structures, and compiler characteristics. - -AC_C_CONST -AC_TYPE_SIZE_T - -dnl Checks for library functions. - -AC_CHECK_FUNCS(bcopy memmove strerror) - -dnl Handle --enable-shared-libraries - -LIBTOOL=./libtool -LIBSUFFIX=la -AC_ARG_ENABLE(shared, -[ --disable-shared build PCRE as a static library], -if test "$enableval" = "no"; then - LIBTOOL= - LIBSUFFIX=a -fi -) - -dnl Handle --enable-utf8 - -AC_ARG_ENABLE(utf8, -[ --enable-utf8 enable UTF8 support (incomplete)], -if test "$enableval" = "yes"; then - UTF8=-DSUPPORT_UTF8 -fi -) - -dnl "Export" these variables - -AC_SUBST(HAVE_MEMMOVE) -AC_SUBST(HAVE_STRERROR) -AC_SUBST(LIBTOOL) -AC_SUBST(LIBSUFFIX) -AC_SUBST(UTF8) -AC_SUBST(PCRE_MAJOR) -AC_SUBST(PCRE_MINOR) -AC_SUBST(PCRE_DATE) -AC_SUBST(PCRE_VERSION) -AC_SUBST(PCRE_LIB_VERSION) -AC_SUBST(PCRE_POSIXLIB_VERSION) - -dnl This must be last; it determines what files are written -AC_OUTPUT(Makefile pcre.h:pcre.in pcre-config:pcre-config.in RunTest:RunTest.in,[chmod a+x RunTest pcre-config]) diff --git a/external/privoxy/pcre/dftables b/external/privoxy/pcre/dftables deleted file mode 100755 index 0e680da..0000000 Binary files a/external/privoxy/pcre/dftables and /dev/null differ diff --git a/external/privoxy/pcre/dftables.c b/external/privoxy/pcre/dftables.c deleted file mode 100644 index d572dfd..0000000 --- a/external/privoxy/pcre/dftables.c +++ /dev/null @@ -1,148 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -PCRE is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - - Copyright (c) 1997-2000 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ - -See the file Tech.Notes for some information on the internals. -*/ - - -/* This is a support program to generate the file chartables.c, containing -character tables of various kinds. They are built according to the default C -locale and used as the default tables by PCRE. Now that pcre_maketables is -a function visible to the outside world, we make use of its code from here in -order to be consistent. */ - -#include <ctype.h> -#include <stdio.h> -#include <string.h> - -#include "internal.h" - -#define DFTABLES /* maketables.c notices this */ -#include "maketables.c" - - -int main(void) -{ -int i; -unsigned const char *tables = pcre_maketables(); - -printf( - "/*************************************************\n" - "* Perl-Compatible Regular Expressions *\n" - "*************************************************/\n\n" - "/* This file is automatically written by the dftables auxiliary \n" - "program. If you edit it by hand, you might like to edit the Makefile to \n" - "prevent its ever being regenerated.\n\n" - "This file is #included in the compilation of pcre.c to build the default\n" - "character tables which are used when no tables are passed to the compile\n" - "function. */\n\n" - "static unsigned char pcre_default_tables[] = {\n\n" - "/* This table is a lower casing table. */\n\n"); - -printf(" "); -for (i = 0; i < 256; i++) - { - if ((i & 7) == 0 && i != 0) printf("\n "); - printf("%3d", *tables++); - if (i != 255) printf(","); - } -printf(",\n\n"); - -printf("/* This table is a case flipping table. */\n\n"); - -printf(" "); -for (i = 0; i < 256; i++) - { - if ((i & 7) == 0 && i != 0) printf("\n "); - printf("%3d", *tables++); - if (i != 255) printf(","); - } -printf(",\n\n"); - -printf( - "/* This table contains bit maps for various character classes.\n" - "Each map is 32 bytes long and the bits run from the least\n" - "significant end of each byte. The classes that have their own\n" - "maps are: space, xdigit, digit, upper, lower, word, graph\n" - "print, punct, and cntrl. Other classes are built from combinations. */\n\n"); - -printf(" "); -for (i = 0; i < cbit_length; i++) - { - if ((i & 7) == 0 && i != 0) - { - if ((i & 31) == 0) printf("\n"); - printf("\n "); - } - printf("0x%02x", *tables++); - if (i != cbit_length - 1) printf(","); - } -printf(",\n\n"); - -printf( - "/* This table identifies various classes of character by individual bits:\n" - " 0x%02x white space character\n" - " 0x%02x letter\n" - " 0x%02x decimal digit\n" - " 0x%02x hexadecimal digit\n" - " 0x%02x alphanumeric or '_'\n" - " 0x%02x regular expression metacharacter or binary zero\n*/\n\n", - ctype_space, ctype_letter, ctype_digit, ctype_xdigit, ctype_word, - ctype_meta); - -printf(" "); -for (i = 0; i < 256; i++) - { - if ((i & 7) == 0 && i != 0) - { - printf(" /* "); - if (isprint(i-8)) printf(" %c -", i-8); - else printf("%3d-", i-8); - if (isprint(i-1)) printf(" %c ", i-1); - else printf("%3d", i-1); - printf(" */\n "); - } - printf("0x%02x", *tables++); - if (i != 255) printf(","); - } - -printf("};/* "); -if (isprint(i-8)) printf(" %c -", i-8); - else printf("%3d-", i-8); -if (isprint(i-1)) printf(" %c ", i-1); - else printf("%3d", i-1); -printf(" */\n\n/* End of chartables.c */\n"); - -return 0; -} - -/* End of dftables.c */ diff --git a/external/privoxy/pcre/dll.mk b/external/privoxy/pcre/dll.mk deleted file mode 100644 index d8b728e..0000000 --- a/external/privoxy/pcre/dll.mk +++ /dev/null @@ -1,60 +0,0 @@ -# dll.mk - auxilary Makefile to easy build dll's for mingw32 target -# ver. 0.6 of 1999-03-25 -# -# Homepage of this makefile - http://www.is.lg.ua/~paul/devel/ -# Homepage of original mingw32 project - -# http://www.fu.is.saga-u.ac.jp/~colin/gcc.html -# -# How to use: -# This makefile can: -# 1. Create automatical .def file from list of objects -# 2. Create .dll from objects and .def file, either automatical, or your -# hand-written (maybe) file, which must have same basename as dll -# WARNING! There MUST be object, which name match dll's name. Make sux. -# 3. Create import library from .def (as for .dll, only its name required, -# not dll itself) -# By convention implibs for dll have .dll.a suffix, e.g. libstuff.dll.a -# Why not just libstuff.a? 'Cos that's name for static lib, ok? -# Process divided into 3 phases because: -# 1. Pre-existent .def possible -# 2. Generating implib is enough time-consuming -# -# Variables: -# DLL_LDLIBS - libs for linking dll -# DLL_LDFLAGS - flags for linking dll -# -# By using $(DLL_SUFFIX) instead of 'dll', e.g. stuff.$(DLL_SUFFIX) -# you may help porting makefiles to other platforms -# -# Put this file in your make's include path (e.g. main include dir, for -# more information see include section in make doc). Put in the beginning -# of your own Makefile line "include dll.mk". Specify dependences, e.g.: -# -# Do all stuff in one step -# libstuff.dll.a: $(OBJECTS) stuff.def -# stuff.def: $(OBJECTS) -# -# Steps separated, pre-provided .def, link with user32 -# -# DLL_LDLIBS=-luser32 -# stuff.dll: $(OBJECTS) -# libstuff.dll.a: $(OBJECTS) - - -DLLWRAP=dllwrap -DLLTOOL=dlltool - -DLL_SUFFIX=dll - -.SUFFIXES: .o .$(DLL_SUFFIX) - -_%.def: %.o - $(DLLTOOL) --export-all --output-def $@ $^ - -%.$(DLL_SUFFIX): %.o - $(DLLWRAP) --dllname $(notdir $@) --driver-name $(CC) --def $*.def -o $@ $(filter %.o,$^) $(DLL_LDFLAGS) $(DLL_LDLIBS) - -lib%.$(DLL_SUFFIX).a:%.def - $(DLLTOOL) --dllname $(notdir $*.dll) --def $< --output-lib $@ - -# End diff --git a/external/privoxy/pcre/doc/ChangeLog b/external/privoxy/pcre/doc/ChangeLog deleted file mode 100644 index 2133dd7..0000000 --- a/external/privoxy/pcre/doc/ChangeLog +++ /dev/null @@ -1,655 +0,0 @@ -ChangeLog for PCRE ------------------- - - -Version 3.4 22-Aug-00 ---------------------- - -1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *. - -2. Diagnose condition (?(0) as an error instead of crashing on matching. - - -Version 3.3 01-Aug-00 ---------------------- - -1. If an octal character was given, but the value was greater than \377, it -was not getting masked to the least significant bits, as documented. This could -lead to crashes in some systems. - -2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats -the hyphen as a literal. PCRE used to give an error; it now behaves like Perl. - -3. Added the functions pcre_free_substring() and pcre_free_substring_list(). -These just pass their arguments on to (pcre_free)(), but they are provided -because some uses of PCRE bind it to non-C systems that can call its functions, -but cannot call free() or pcre_free() directly. - -4. Add "make test" as a synonym for "make check". Corrected some comments in -the Makefile. - -5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the -Makefile. - -6. Changed the name of pgrep to pcregrep, because Solaris has introduced a -command called pgrep for grepping around the active processes. - -7. Added the beginnings of support for UTF-8 character strings. - -8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and -RANLIB to ./ltconfig so that they are used by libtool. I think these are all -the relevant ones. (AR is not passed because ./ltconfig does its own figuring -out for the ar command.) - - -Version 3.2 12-May-00 ---------------------- - -This is purely a bug fixing release. - -1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead -of ZA. This was just one example of several cases that could provoke this bug, -which was introduced by change 9 of version 2.00. The code for breaking -infinite loops after an iteration that matches an empty string was't working -correctly. - -2. The pcretest program was not imitating Perl correctly for the pattern /a*/g -when matched against abbab (for example). After matching an empty string, it -wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this -caused it to match further down the string than it should. - -3. The code contained an inclusion of sys/types.h. It isn't clear why this -was there because it doesn't seem to be needed, and it causes trouble on some -systems, as it is not a Standard C header. It has been removed. - -4. Made 4 silly changes to the source to avoid stupid compiler warnings that -were reported on the Macintosh. The changes were from - - while ((c = *(++ptr)) != 0 && c != '\n'); -to - while ((c = *(++ptr)) != 0 && c != '\n') ; - -Totally extraordinary, but if that's what it takes... - -5. PCRE is being used in one environment where neither memmove() nor bcopy() is -available. Added HAVE_BCOPY and an autoconf test for it; if neither -HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which -assumes the way PCRE uses memmove() (always moving upwards). - -6. PCRE is being used in one environment where strchr() is not available. There -was only one use in pcre.c, and writing it out to avoid strchr() probably gives -faster code anyway. - - -Version 3.1 09-Feb-00 ---------------------- - -The only change in this release is the fixing of some bugs in Makefile.in for -the "install" target: - -(1) It was failing to install pcreposix.h. - -(2) It was overwriting the pcre.3 man page with the pcreposix.3 man page. - - -Version 3.0 01-Feb-00 ---------------------- - -1. Add support for the /+ modifier to perltest (to output $` like it does in -pcretest). - -2. Add support for the /g modifier to perltest. - -3. Fix pcretest so that it behaves even more like Perl for /g when the pattern -matches null strings. - -4. Fix perltest so that it doesn't do unwanted things when fed an empty -pattern. Perl treats empty patterns specially - it reuses the most recent -pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this -effect. - -5. The POSIX interface was broken in that it was just handing over the POSIX -captured string vector to pcre_exec(), but (since release 2.00) PCRE has -required a bigger vector, with some working space on the end. This means that -the POSIX wrapper now has to get and free some memory, and copy the results. - -6. Added some simple autoconf support, placing the test data and the -documentation in separate directories, re-organizing some of the -information files, and making it build pcre-config (a GNU standard). Also added -libtool support for building PCRE as a shared library, which is now the -default. - -7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and -09 are not valid octal constants. Single digits will be used for minor values -less than 10. - -8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that -existing programs that set these in the POSIX interface can use PCRE without -modification. - -9. Added a new function, pcre_fullinfo() with an extensible interface. It can -return all that pcre_info() returns, plus additional data. The pcre_info() -function is retained for compatibility, but is considered to be obsolete. - -10. Added experimental recursion feature (?R) to handle one common case that -Perl 5.6 will be able to do with (?p{...}). - -11. Added support for POSIX character classes like [:alpha:], which Perl is -adopting. - - -Version 2.08 31-Aug-99 ----------------------- - -1. When startoffset was not zero and the pattern began with ".*", PCRE was not -trying to match at the startoffset position, but instead was moving forward to -the next newline as if a previous match had failed. - -2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G, -and could get into a loop if a null string was matched other than at the start -of the subject. - -3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can -be distinguished at compile time, and for completeness also added PCRE_DATE. - -5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL -in GnuWin32 environments. - - -Version 2.07 29-Jul-99 ----------------------- - -1. The documentation is now supplied in plain text form and HTML as well as in -the form of man page sources. - -2. C++ compilers don't like assigning (void *) values to other pointer types. -In particular this affects malloc(). Although there is no problem in Standard -C, I've put in casts to keep C++ compilers happy. - -3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call -should be (const char *). - -4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may -be useful for non-Unix systems who don't want to bother with the POSIX stuff. -However, I haven't made this a standard facility. The documentation doesn't -mention it, and the Makefile doesn't support it. - -5. The Makefile now contains an "install" target, with editable destinations at -the top of the file. The pcretest program is not installed. - -6. pgrep -V now gives the PCRE version number and date. - -7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was -causing the entire string to be ignored, instead of just the last character. - -8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a -non-matching string, it can take a very, very long time, even for strings of -quite modest length, because of the nested recursion. PCRE now does better in -some of these cases. It does this by remembering the last required literal -character in the pattern, and pre-searching the subject to ensure it is present -before running the real match. In other words, it applies a heuristic to detect -some types of certain failure quickly, and in the above example, if presented -with a string that has no trailing " it gives "no match" very quickly. - -9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored; -other alternatives are tried instead. - - -Version 2.06 09-Jun-99 ----------------------- - -1. Change pcretest's output for amount of store used to show just the code -space, because the remainder (the data block) varies in size between 32-bit and -64-bit systems. - -2. Added an extra argument to pcre_exec() to supply an offset in the subject to -start matching at. This allows lookbehinds to work when searching for multiple -occurrences in a string. - -3. Added additional options to pcretest for testing multiple occurrences: - - /+ outputs the rest of the string that follows a match - /g loops for multiple occurrences, using the new startoffset argument - /G loops for multiple occurrences by passing an incremented pointer - -4. PCRE wasn't doing the "first character" optimization for patterns starting -with \b or \B, though it was doing it for other lookbehind assertions. That is, -it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with -the letter 'x'. On long subject strings, this gives a significant speed-up. - - -Version 2.05 21-Apr-99 ----------------------- - -1. Changed the type of magic_number from int to long int so that it works -properly on 16-bit systems. - -2. Fixed a bug which caused patterns starting with .* not to work correctly -when the subject string contained newline characters. PCRE was assuming -anchoring for such patterns in all cases, which is not correct because .* will -not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if -DOTALL is set at top level; otherwise it knows that patterns starting with .* -must be retried after every newline in the subject. - - -Version 2.04 18-Feb-99 ----------------------- - -1. For parenthesized subpatterns with repeats whose minimum was zero, the -computation of the store needed to hold the pattern was incorrect (too large). -If such patterns were nested a few deep, this could multiply and become a real -problem. - -2. Added /M option to pcretest to show the memory requirement of a specific -pattern. Made -m a synonym of -s (which does this globally) for compatibility. - -3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being -compiled in such a way that the backtracking after subsequent failure was -pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of -((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size. - - -Version 2.03 02-Feb-99 ----------------------- - -1. Fixed typo and small mistake in man page. - -2. Added 4th condition (GPL supersedes if conflict) and created separate -LICENCE file containing the conditions. - -3. Updated pcretest so that patterns such as /abc\/def/ work like they do in -Perl, that is the internal \ allows the delimiter to be included in the -pattern. Locked out the use of \ as a delimiter. If \ immediately follows -the final delimiter, add \ to the end of the pattern (to test the error). - -4. Added the convenience functions for extracting substrings after a successful -match. Updated pcretest to make it able to test these functions. - - -Version 2.02 14-Jan-99 ----------------------- - -1. Initialized the working variables associated with each extraction so that -their saving and restoring doesn't refer to uninitialized store. - -2. Put dummy code into study.c in order to trick the optimizer of the IBM C -compiler for OS/2 into generating correct code. Apparently IBM isn't going to -fix the problem. - -3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution -calls, and wasn't printing the correct value for compiling calls. Increased the -default value of LOOPREPEAT, and the number of significant figures in the -times. - -4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT. - -5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid -a building problem on Windows NT with a FAT file system. - - -Version 2.01 21-Oct-98 ----------------------- - -1. Changed the API for pcre_compile() to allow for the provision of a pointer -to character tables built by pcre_maketables() in the current locale. If NULL -is passed, the default tables are used. - - -Version 2.00 24-Sep-98 ----------------------- - -1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable -it any more. - -2. Allow quantification of (?>) groups, and make it work correctly. - -3. The first character computation wasn't working for (?>) groups. - -4. Correct the implementation of \Z (it is permitted to match on the \n at the -end of the subject) and add 5.005's \z, which really does match only at the -very end of the subject. - -5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater. - -6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and -DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005 -localized options. All options to pcre_study() were also removed. - -7. Add other new features from 5.005: - - $(?<= positive lookbehind - $(?<! negative lookbehind - (?imsx-imsx) added the unsetting capability - such a setting is global if at outer level; local otherwise - (?imsx-imsx:) non-capturing groups with option setting - (?(cond)re|re) conditional pattern matching - - A backreference to itself in a repeated group matches the previous - captured string. - -8. General tidying up of studying (both automatic and via "study") -consequential on the addition of new assertions. - -9. As in 5.005, unlimited repeated groups that could match an empty substring -are no longer faulted at compile time. Instead, the loop is forcibly broken at -runtime if any iteration does actually match an empty substring. - -10. Include the RunTest script in the distribution. - -11. Added tests from the Perl 5.005_02 distribution. This showed up a few -discrepancies, some of which were old and were also with respect to 5.004. They -have now been fixed. - - -Version 1.09 28-Apr-98 ----------------------- - -1. A negated single character class followed by a quantifier with a minimum -value of one (e.g. [^x]{1,6} ) was not compiled correctly. This could lead to -program crashes, or just wrong answers. This did not apply to negated classes -containing more than one character, or to minima other than one. - - -Version 1.08 27-Mar-98 ----------------------- - -1. Add PCRE_UNGREEDY to invert the greediness of quantifiers. - -2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The -latter must appear before anything that relies on it in the pattern. - - -Version 1.07 16-Feb-98 ----------------------- - -1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited -repeat of a potentially empty string). - - -Version 1.06 23-Jan-98 ----------------------- - -1. Added Markus Oberhumer's little patches for C++. - -2. Literal strings longer than 255 characters were broken. - - -Version 1.05 23-Dec-97 ----------------------- - -1. Negated character classes containing more than one character were failing if -PCRE_CASELESS was set at run time. - - -Version 1.04 19-Dec-97 ----------------------- - -1. Corrected the man page, where some "const" qualifiers had been omitted. - -2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with -input syntax. - -3. Fixed memory leak which occurred when a regex with back references was -matched with an offsets vector that wasn't big enough. The temporary memory -that is used in this case wasn't being freed if the match failed. - -4. Tidied pcretest to ensure it frees memory that it gets. - -5. Temporary memory was being obtained in the case where the passed offsets -vector was exactly big enough. - -6. Corrected definition of offsetof() from change 5 below. - -7. I had screwed up change 6 below and broken the rules for the use of -setjmp(). Now fixed. - - -Version 1.03 18-Dec-97 ----------------------- - -1. A erroneous regex with a missing opening parenthesis was correctly -diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes -on some systems. - -2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because -it was reported that one broken compiler failed on the former because "code" is -also an independent variable. - -3. The erroneous regex a[]b caused an array overrun reference. - -4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not -fail on data ending with that character. (It was going on too far, and checking -the next character, typically a binary zero.) This was specific to the -optimized code for single-character negative classes. - -5. Added a contributed patch from the TIN world which does the following: - - + Add an undef for memmove, in case the the system defines a macro for it. - - + Add a definition of offsetof(), in case there isn't one. (I don't know - the reason behind this - offsetof() is part of the ANSI standard - but - it does no harm). - - + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating - most of the places where whitespace preceded '#'. I have given up and - allowed the remaining 2 cases to be at the margin. - - + Rename some variables in pcre to eliminate shadowing. This seems very - pedantic, but does no harm, of course. - -6. Moved the call to setjmp() into its own function, to get rid of warnings -from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used. - -7. Constructs such as \d{8,} were compiling into the equivalent of -\d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the -outcome, but in this particular case used more store than had been allocated, -which caused the bug to be discovered because it threw up an internal error. - -8. The debugging code in both pcre and pcretest for outputting the compiled -form of a regex was going wrong in the case of back references followed by -curly-bracketed repeats. - - -Version 1.02 12-Dec-97 ----------------------- - -1. Typos in pcre.3 and comments in the source fixed. - -2. Applied a contributed patch to get rid of places where it used to remove -'const' from variables, and fixed some signed/unsigned and uninitialized -variable warnings. - -3. Added the "runtest" target to Makefile. - -4. Set default compiler flag to -O2 rather than just -O. - - -Version 1.01 19-Nov-97 ----------------------- - -1. PCRE was failing to diagnose unlimited repeat of empty string for patterns -like /([ab]*)*/, that is, for classes with more than one character in them. - -2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such -as /((?>a*))*/ (a PCRE_EXTRA facility). - - -Version 1.00 18-Nov-97 ----------------------- - -1. Added compile-time macros to support systems such as SunOS4 which don't have -memmove() or strerror() but have other things that can be used instead. - -2. Arranged that "make clean" removes the executables. - - -Version 0.99 27-Oct-97 ----------------------- - -1. Fixed bug in code for optimizing classes with only one character. It was -initializing a 32-byte map regardless, which could cause it to run off the end -of the memory it had got. - -2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction. - - -Version 0.98 22-Oct-97 ----------------------- - -1. Fixed bug in code for handling temporary memory usage when there are more -back references than supplied space in the ovector. This could cause segfaults. - - -Version 0.97 21-Oct-97 ----------------------- - -1. Added the \X "cut" facility, conditional on PCRE_EXTRA. - -2. Optimized negated single characters not to use a bit map. - -3. Brought error texts together as macro definitions; clarified some of them; -fixed one that was wrong - it said "range out of order" when it meant "invalid -escape sequence". - -4. Changed some char * arguments to const char *. - -5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX). - -6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in -pcretest. - - -Version 0.96 16-Oct-97 ----------------------- - -1. Added a simple "pgrep" utility to the distribution. - -2. Fixed an incompatibility with Perl: "{" is now treated as a normal character -unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}" -where "ddd" means "one or more decimal digits". - -3. Fixed serious bug. If a pattern had a back reference, but the call to -pcre_exec() didn't supply a large enough ovector to record the related -identifying subpattern, the match always failed. PCRE now remembers the number -of the largest back reference, and gets some temporary memory in which to save -the offsets during matching if necessary, in order to ensure that -backreferences always work. - -4. Increased the compatibility with Perl in a number of ways: - - (a) . no longer matches \n by default; an option PCRE_DOTALL is provided - to request this handling. The option can be set at compile or exec time. - - (b) $ matches before a terminating newline by default; an option - PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline - mode). The option can be set at compile or exec time. - - (c) The handling of \ followed by a digit other than 0 is now supposed to be - the same as Perl's. If the decimal number it represents is less than 10 - or there aren't that many previous left capturing parentheses, an octal - escape is read. Inside a character class, it's always an octal escape, - even if it is a single digit. - - (d) An escaped but undefined alphabetic character is taken as a literal, - unless PCRE_EXTRA is set. Currently this just reserves the remaining - escapes. - - (e) {0} is now permitted. (The previous item is removed from the compiled - pattern). - -5. Changed all the names of code files so that the basic parts are no longer -than 10 characters, and abolished the teeny "globals.c" file. - -6. Changed the handling of character classes; they are now done with a 32-byte -bit map always. - -7. Added the -d and /D options to pcretest to make it possible to look at the -internals of compilation without having to recompile pcre. - - -Version 0.95 23-Sep-97 ----------------------- - -1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or -\x20 at the start of a run of normal characters. These were being treated as -real characters, instead of the source characters being re-checked. - - -Version 0.94 18-Sep-97 ----------------------- - -1. The functions are now thread-safe, with the caveat that the global variables -containing pointers to malloc() and free() or alternative functions are the -same for all threads. - -2. Get pcre_study() to generate a bitmap of initial characters for non- -anchored patterns when this is possible, and use it if passed to pcre_exec(). - - -Version 0.93 15-Sep-97 ----------------------- - -1. /(b)|(:+)/ was computing an incorrect first character. - -2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(), -but not actually doing anything yet. - -3. Treat "-" characters in classes that cannot be part of ranges as literals, -as Perl does (e.g. [-az] or [az-]). - -4. Set the anchored flag if a branch starts with .* or .*? because that tests -all possible positions. - -5. Split up into different modules to avoid including unneeded functions in a -compiled binary. However, compile and exec are still in one module. The "study" -function is split off. - -6. The character tables are now in a separate module whose source is generated -by an auxiliary program - but can then be edited by hand if required. There are -now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or -toupper() in the code. - -7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and -make them global. Abolish the function for setting them, as the caller can now -set them directly. - - -Version 0.92 11-Sep-97 ----------------------- - -1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character -(e.g. /a{1,3}/) was broken (I mis-optimized it). - -2. Caseless matching was not working in character classes if the characters in -the pattern were in upper case. - -3. Make ranges like [W-c] work in the same way as Perl for caseless matching. - -4. Make PCRE_ANCHORED public and accept as a compile option. - -5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and -PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to -pass them. - -6. Give an error if bad option bits passed at compile or run time. - -7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to -pcretest to cause it to pass that flag. - -8. Add pcre_info(), to get the number of identifying subpatterns, the stored -options, and the first character, if set. - -9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character. - - -Version 0.91 10-Sep-97 ----------------------- - -1. PCRE was failing to diagnose unlimited repeats of subpatterns that could -match the empty string as in /(a*)*/. It was looping and ultimately crashing. - -2. PCRE was looping on encountering an indefinitely repeated back reference to -a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what -Perl does - treats the match as successful. - -**** diff --git a/external/privoxy/pcre/doc/NON-UNIX-USE b/external/privoxy/pcre/doc/NON-UNIX-USE deleted file mode 100644 index 09a7432..0000000 --- a/external/privoxy/pcre/doc/NON-UNIX-USE +++ /dev/null @@ -1,50 +0,0 @@ -Compiling PCRE on non-Unix systems ----------------------------------- - -If you want to compile PCRE for a non-Unix system, note that it consists -entirely of code written in Standard C, and so should compile successfully -on any machine with a Standard C compiler and library, using normal compiling -commands to do the following: - -(1) Copy or rename the file config.in as config.h, and change the macros that -define HAVE_STRERROR and HAVE_MEMMOVE to define them as 1 rather than 0. -Unfortunately, because of the way Unix autoconf works, the default setting has -to be 0. - -(2) Copy or rename the file pcre.in as pcre.h, and change the macro definitions -for PCRE_MAJOR, PCRE_MINOR, and PCRE_DATE near its start to the values set in -configure.in. - -(3) Compile dftables.c as a stand-alone program, and then run it with -the standard output sent to chartables.c. This generates a set of standard -character tables. - -(4) Compile maketables.c, get.c, study.c and pcre.c and link them all -together into an object library in whichever form your system keeps such -libraries. This is the pcre library (chartables.c gets included by means of an -#include directive). - -(5) Similarly, compile pcreposix.c and link it as the pcreposix library. - -(6) Compile the test program pcretest.c. This needs the functions in the -pcre and pcreposix libraries when linking. - -(7) Run pcretest on the testinput files in the testdata directory, and check -that the output matches the corresponding testoutput files. You must use the --i option when checking testinput2. - -If you have a system without "configure" but where you can use a Makefile, edit -Makefile.in to create Makefile, substituting suitable values for the variables -at the head of the file. - -Some help in building a Win32 DLL of PCRE in GnuWin32 environments was -contributed by Paul.Sokolovsky(a)technologist.com. These environments are -Mingw32 (http://www.xraylith.wisc.edu/~khan/software/gnu-win32/) and -CygWin (http://sourceware.cygnus.com/cygwin/) Paul comments: - - For CygWin, set CFLAGS=-mno-cygwin, and do 'make dll'. You'll get - pcre.dll (containing pcreposix also), libpcre.dll.a, and dynamically - linked pgrep and pcretest. If you have /bin/sh, run RunTest (three - main test go ok, locale not supported). - -**** diff --git a/external/privoxy/pcre/doc/Tech.Notes b/external/privoxy/pcre/doc/Tech.Notes deleted file mode 100644 index 7b96e5b..0000000 --- a/external/privoxy/pcre/doc/Tech.Notes +++ /dev/null @@ -1,243 +0,0 @@ -Technical Notes about PCRE --------------------------- - -Many years ago I implemented some regular expression functions to an algorithm -suggested by Martin Richards. These were not Unix-like in form, and were quite -restricted in what they could do by comparison with Perl. The interesting part -about the algorithm was that the amount of space required to hold the compiled -form of an expression was known in advance. The code to apply an expression did -not operate by backtracking, as the Henry Spencer and Perl code does, but -instead checked all possibilities simultaneously by keeping a list of current -states and checking all of them as it advanced through the subject string. (In -the terminology of Jeffrey Friedl's book, it was a "DFA algorithm".) When the -pattern was all used up, all remaining states were possible matches, and the -one matching the longest subset of the subject string was chosen. This did not -necessarily maximize the individual wild portions of the pattern, as is -expected in Unix and Perl-style regular expressions. - -By contrast, the code originally written by Henry Spencer and subsequently -heavily modified for Perl actually compiles the expression twice: once in a -dummy mode in order to find out how much store will be needed, and then for -real. The execution function operates by backtracking and maximizing (or, -optionally, minimizing in Perl) the amount of the subject that matches -individual wild portions of the pattern. This is an "NFA algorithm" in Friedl's -terminology. - -For the set of functions that forms PCRE (which are unrelated to those -mentioned above), I tried at first to invent an algorithm that used an amount -of store bounded by a multiple of the number of characters in the pattern, to -save on compiling time. However, because of the greater complexity in Perl -regular expressions, I couldn't do this. In any case, a first pass through the -pattern is needed, in order to find internal flag settings like (?i) at top -level. So PCRE works by running a very degenerate first pass to calculate a -maximum store size, and then a second pass to do the real compile - which may -use a bit less than the predicted amount of store. The idea is that this is -going to turn out faster because the first pass is degenerate and the second -pass can just store stuff straight into the vector. It does make the compiling -functions bigger, of course, but they have got quite big anyway to handle all -the Perl stuff. - -The compiled form of a pattern is a vector of bytes, containing items of -variable length. The first byte in an item is an opcode, and the length of the -item is either implicit in the opcode or contained in the data bytes which -follow it. A list of all the opcodes follows: - -Opcodes with no following data ------------------------------- - -These items are all just one byte long - - OP_END end of pattern - OP_ANY match any character - OP_SOD match start of data: \A - OP_CIRC ^ (start of data, or after \n in multiline) - OP_NOT_WORD_BOUNDARY \W - OP_WORD_BOUNDARY \w - OP_NOT_DIGIT \D - OP_DIGIT \d - OP_NOT_WHITESPACE \S - OP_WHITESPACE \s - OP_NOT_WORDCHAR \W - OP_WORDCHAR \w - OP_EODN match end of data or \n at end: \Z - OP_EOD match end of data: \z - OP_DOLL $ (end of data, or before \n in multiline) - OP_RECURSE match the pattern recursively - - -Repeating single characters ---------------------------- - -The common repeats (*, +, ?) when applied to a single character appear as -two-byte items using the following opcodes: - - OP_STAR - OP_MINSTAR - OP_PLUS - OP_MINPLUS - OP_QUERY - OP_MINQUERY - -Those with "MIN" in their name are the minimizing versions. Each is followed by -the character that is to be repeated. Other repeats make use of - - OP_UPTO - OP_MINUPTO - OP_EXACT - -which are followed by a two-byte count (most significant first) and the -repeated character. OP_UPTO matches from 0 to the given number. A repeat with a -non-zero minimum and a fixed maximum is coded as an OP_EXACT followed by an -OP_UPTO (or OP_MINUPTO). - - -Repeating character types -------------------------- - -Repeats of things like \d are done exactly as for single characters, except -that instead of a character, the opcode for the type is stored in the data -byte. The opcodes are: - - OP_TYPESTAR - OP_TYPEMINSTAR - OP_TYPEPLUS - OP_TYPEMINPLUS - OP_TYPEQUERY - OP_TYPEMINQUERY - OP_TYPEUPTO - OP_TYPEMINUPTO - OP_TYPEEXACT - - -Matching a character string ---------------------------- - -The OP_CHARS opcode is followed by a one-byte count and then that number of -characters. If there are more than 255 characters in sequence, successive -instances of OP_CHARS are used. - - -Character classes ------------------ - -OP_CLASS is used for a character class, provided there are at least two -characters in the class. If there is only one character, OP_CHARS is used for a -positive class, and OP_NOT for a negative one (that is, for something like -[^a]). Another set of repeating opcodes (OP_NOTSTAR etc.) are used for a -repeated, negated, single-character class. The normal ones (OP_STAR etc.) are -used for a repeated positive single-character class. - -OP_CLASS is followed by a 32-byte bit map containing a 1 bit for every -character that is acceptable. The bits are counted from the least significant -end of each byte. - - -Back references ---------------- - -OP_REF is followed by a single byte containing the reference number. - - -Repeating character classes and back references ------------------------------------------------ - -Single-character classes are handled specially (see above). This applies to -OP_CLASS and OP_REF. In both cases, the repeat information follows the base -item. The matching code looks at the following opcode to see if it is one of - - OP_CRSTAR - OP_CRMINSTAR - OP_CRPLUS - OP_CRMINPLUS - OP_CRQUERY - OP_CRMINQUERY - OP_CRRANGE - OP_CRMINRANGE - -All but the last two are just single-byte items. The others are followed by -four bytes of data, comprising the minimum and maximum repeat counts. - - -Brackets and alternation ------------------------- - -A pair of non-capturing (round) brackets is wrapped round each expression at -compile time, so alternation always happens in the context of brackets. -Non-capturing brackets use the opcode OP_BRA, while capturing brackets use -OP_BRA+1, OP_BRA+2, etc. [Note for North Americans: "bracket" to some English -speakers, including myself, can be round, square, curly, or pointy. Hence this -usage.] - -A bracket opcode is followed by two bytes which give the offset to the next -alternative OP_ALT or, if there aren't any branches, to the matching KET -opcode. Each OP_ALT is followed by two bytes giving the offset to the next one, -or to the KET opcode. - -OP_KET is used for subpatterns that do not repeat indefinitely, while -OP_KETRMIN and OP_KETRMAX are used for indefinite repetitions, minimally or -maximally respectively. All three are followed by two bytes giving (as a -positive number) the offset back to the matching BRA opcode. - -If a subpattern is quantified such that it is permitted to match zero times, it -is preceded by one of OP_BRAZERO or OP_BRAMINZERO. These are single-byte -opcodes which tell the matcher that skipping this subpattern entirely is a -valid branch. - -A subpattern with an indefinite maximum repetition is replicated in the -compiled data its minimum number of times (or once with a BRAZERO if the -minimum is zero), with the final copy terminating with a KETRMIN or KETRMAX as -appropriate. - -A subpattern with a bounded maximum repetition is replicated in a nested -fashion up to the maximum number of times, with BRAZERO or BRAMINZERO before -each replication after the minimum, so that, for example, (abc){2,5} is -compiled as (abc)(abc)((abc)((abc)(abc)?)?)?. The 200-bracket limit does not -apply to these internally generated brackets. - - -Assertions ----------- - -Forward assertions are just like other subpatterns, but starting with one of -the opcodes OP_ASSERT or OP_ASSERT_NOT. Backward assertions use the opcodes -OP_ASSERTBACK and OP_ASSERTBACK_NOT, and the first opcode inside the assertion -is OP_REVERSE, followed by a two byte count of the number of characters to move -back the pointer in the subject string. When operating in UTF-8 mode, the count -is a character count rather than a byte count. A separate count is present in -each alternative of a lookbehind assertion, allowing them to have different -fixed lengths. - - -Once-only subpatterns ---------------------- - -These are also just like other subpatterns, but they start with the opcode -OP_ONCE. - - -Conditional subpatterns ------------------------ - -These are like other subpatterns, but they start with the opcode OP_COND. If -the condition is a back reference, this is stored at the start of the -subpattern using the opcode OP_CREF followed by one byte containing the -reference number. Otherwise, a conditional subpattern will always start with -one of the assertions. - - -Changing options ----------------- - -If any of the /i, /m, or /s options are changed within a parenthesized group, -an OP_OPT opcode is compiled, followed by one byte containing the new settings -of these flags. If there are several alternatives in a group, there is an -occurrence of OP_OPT at the start of all those following the first options -change, to set appropriate options for the start of the alternative. -Immediately after the end of the group there is another such item to reset the -flags to their previous values. Other changes of flag within the pattern can be -handled entirely at compile time, and so do not cause anything to be put into -the compiled data. - - -Philip Hazel -August 2000 diff --git a/external/privoxy/pcre/doc/authors b/external/privoxy/pcre/doc/authors deleted file mode 100644 index bfe1b5d..0000000 --- a/external/privoxy/pcre/doc/authors +++ /dev/null @@ -1,6 +0,0 @@ -Written by: Philip Hazel <ph10(a)cam.ac.uk> - -University of Cambridge Computing Service, -Cambridge, England. Phone: +44 1223 334714. - -Copyright (c) 1997-2000 University of Cambridge diff --git a/external/privoxy/pcre/doc/copying b/external/privoxy/pcre/doc/copying deleted file mode 100644 index 34d20db..0000000 --- a/external/privoxy/pcre/doc/copying +++ /dev/null @@ -1,46 +0,0 @@ -PCRE LICENCE ------------- - -PCRE is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - -University of Cambridge Computing Service, -Cambridge, England. Phone: +44 1223 334714. - -Copyright (c) 1997-2000 University of Cambridge - -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. In practice, this means that if you use - PCRE in software which you distribute to others, commercially or - otherwise, you must put a sentence like this - - Regular expression support is provided by the PCRE library package, - which is open source software, written by Philip Hazel, and copyright - by the University of Cambridge, England. - - somewhere reasonably visible in your documentation and in any relevant - files or online help data or similar. A reference to the ftp site for - the source, that is, to - - ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/ - - should also be given in the documentation. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. - -End diff --git a/external/privoxy/pcre/doc/news b/external/privoxy/pcre/doc/news deleted file mode 100644 index 56fccdf..0000000 --- a/external/privoxy/pcre/doc/news +++ /dev/null @@ -1,54 +0,0 @@ -News about PCRE releases ------------------------- - -Release 3.3 01-Aug-00 ---------------------- - -There is some support for UTF-8 character strings. This is incomplete and -experimental. The documentation describes what is and what is not implemented. -Otherwise, this is just a bug-fixing release. - - -Release 3.0 01-Feb-00 ---------------------- - -1. A "configure" script is now used to configure PCRE for Unix systems. It -builds a Makefile, a config.h file, and the pcre-config script. - -2. PCRE is built as a shared library by default. - -3. There is support for POSIX classes such as [:alpha:]. - -5. There is an experimental recursion feature. - ----------------------------------------------------------------------------- - IMPORTANT FOR THOSE UPGRADING FROM VERSIONS BEFORE 2.00 - -Please note that there has been a change in the API such that a larger -ovector is required at matching time, to provide some additional workspace. -The new man page has details. This change was necessary in order to support -some of the new functionality in Perl 5.005. - - IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.00 - -Another (I hope this is the last!) change has been made to the API for the -pcre_compile() function. An additional argument has been added to make it -possible to pass over a pointer to character tables built in the current -locale by pcre_maketables(). To use the default tables, this new arguement -should be passed as NULL. - - IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.05 - -Yet another (and again I hope this really is the last) change has been made -to the API for the pcre_exec() function. An additional argument has been -added to make it possible to start the match other than at the start of the -subject string. This is important if there are lookbehinds. The new man -page has the details, but you just want to convert existing programs, all -you need to do is to stick in a new fifth argument to pcre_exec(), with a -value of zero. For example, change - - pcre_exec(pattern, extra, subject, length, options, ovec, ovecsize) -to - pcre_exec(pattern, extra, subject, length, 0, options, ovec, ovecsize) - -**** diff --git a/external/privoxy/pcre/doc/pcre.3 b/external/privoxy/pcre/doc/pcre.3 deleted file mode 100644 index bb812f4..0000000 --- a/external/privoxy/pcre/doc/pcre.3 +++ /dev/null @@ -1,1810 +0,0 @@ -.TH PCRE 3 -.SH NAME -pcre - Perl-compatible regular expressions. -.SH SYNOPSIS -.B #include <pcre.h> -.PP -.SM -.br -.B pcre *pcre_compile(const char *\fIpattern\fR, int \fIoptions\fR, -.ti +5n -.B const char **\fIerrptr\fR, int *\fIerroffset\fR, -.ti +5n -.B const unsigned char *\fItableptr\fR); -.PP -.br -.B pcre_extra *pcre_study(const pcre *\fIcode\fR, int \fIoptions\fR, -.ti +5n -.B const char **\fIerrptr\fR); -.PP -.br -.B int pcre_exec(const pcre *\fIcode\fR, "const pcre_extra *\fIextra\fR," -.ti +5n -.B "const char *\fIsubject\fR," int \fIlength\fR, int \fIstartoffset\fR, -.ti +5n -.B int \fIoptions\fR, int *\fIovector\fR, int \fIovecsize\fR); -.PP -.br -.B int pcre_copy_substring(const char *\fIsubject\fR, int *\fIovector\fR, -.ti +5n -.B int \fIstringcount\fR, int \fIstringnumber\fR, char *\fIbuffer\fR, -.ti +5n -.B int \fIbuffersize\fR); -.PP -.br -.B int pcre_get_substring(const char *\fIsubject\fR, int *\fIovector\fR, -.ti +5n -.B int \fIstringcount\fR, int \fIstringnumber\fR, -.ti +5n -.B const char **\fIstringptr\fR); -.PP -.br -.B int pcre_get_substring_list(const char *\fIsubject\fR, -.ti +5n -.B int *\fIovector\fR, int \fIstringcount\fR, "const char ***\fIlistptr\fR);" -.PP -.br -.B void pcre_free_substring(const char *\fIstringptr\fR); -.PP -.br -.B void pcre_free_substring_list(const char **\fIstringptr\fR); -.PP -.br -.B const unsigned char *pcre_maketables(void); -.PP -.br -.B int pcre_fullinfo(const pcre *\fIcode\fR, "const pcre_extra *\fIextra\fR," -.ti +5n -.B int \fIwhat\fR, void *\fIwhere\fR); -.PP -.br -.B int pcre_info(const pcre *\fIcode\fR, int *\fIoptptr\fR, int -.B *\fIfirstcharptr\fR); -.PP -.br -.B char *pcre_version(void); -.PP -.br -.B void *(*pcre_malloc)(size_t); -.PP -.br -.B void (*pcre_free)(void *); - - - -.SH DESCRIPTION -The PCRE library is a set of functions that implement regular expression -pattern matching using the same syntax and semantics as Perl 5, with just a few -differences (see below). The current implementation corresponds to Perl 5.005, -with some additional features from later versions. This includes some -experimental, incomplete support for UTF-8 encoded strings. Details of exactly -what is and what is not supported are given below. - -PCRE has its own native API, which is described in this document. There is also -a set of wrapper functions that correspond to the POSIX regular expression API. -These are described in the \fBpcreposix\fR documentation. - -The native API function prototypes are defined in the header file \fBpcre.h\fR, -and on Unix systems the library itself is called \fBlibpcre.a\fR, so can be -accessed by adding \fB-lpcre\fR to the command for linking an application which -calls it. The header file defines the macros PCRE_MAJOR and PCRE_MINOR to -contain the major and minor release numbers for the library. Applications can -use these to include support for different releases. - -The functions \fBpcre_compile()\fR, \fBpcre_study()\fR, and \fBpcre_exec()\fR -are used for compiling and matching regular expressions. - -The functions \fBpcre_copy_substring()\fR, \fBpcre_get_substring()\fR, and -\fBpcre_get_substring_list()\fR are convenience functions for extracting -captured substrings from a matched subject string; \fBpcre_free_substring()\fR -and \fBpcre_free_substring_list()\fR are also provided, to free the memory used -for extracted strings. - -The function \fBpcre_maketables()\fR is used (optionally) to build a set of -character tables in the current locale for passing to \fBpcre_compile()\fR. - -The function \fBpcre_fullinfo()\fR is used to find out information about a -compiled pattern; \fBpcre_info()\fR is an obsolete version which returns only -some of the available information, but is retained for backwards compatibility. -The function \fBpcre_version()\fR returns a pointer to a string containing the -version of PCRE and its date of release. - -The global variables \fBpcre_malloc\fR and \fBpcre_free\fR initially contain -the entry points of the standard \fBmalloc()\fR and \fBfree()\fR functions -respectively. PCRE calls the memory management functions via these variables, -so a calling program can replace them if it wishes to intercept the calls. This -should be done before calling any PCRE functions. - - -.SH MULTI-THREADING -The PCRE functions can be used in multi-threading applications, with the -proviso that the memory management functions pointed to by \fBpcre_malloc\fR -and \fBpcre_free\fR are shared by all threads. - -The compiled form of a regular expression is not altered during matching, so -the same compiled pattern can safely be used by several threads at once. - - -.SH COMPILING A PATTERN -The function \fBpcre_compile()\fR is called to compile a pattern into an -internal form. The pattern is a C string terminated by a binary zero, and -is passed in the argument \fIpattern\fR. A pointer to a single block of memory -that is obtained via \fBpcre_malloc\fR is returned. This contains the -compiled code and related data. The \fBpcre\fR type is defined for this for -convenience, but in fact \fBpcre\fR is just a typedef for \fBvoid\fR, since the -contents of the block are not externally defined. It is up to the caller to -free the memory when it is no longer required. -.PP -The size of a compiled pattern is roughly proportional to the length of the -pattern string, except that each character class (other than those containing -just a single character, negated or not) requires 33 bytes, and repeat -quantifiers with a minimum greater than one or a bounded maximum cause the -relevant portions of the compiled pattern to be replicated. -.PP -The \fIoptions\fR argument contains independent bits that affect the -compilation. It should be zero if no options are required. Some of the options, -in particular, those that are compatible with Perl, can also be set and unset -from within the pattern (see the detailed description of regular expressions -below). For these options, the contents of the \fIoptions\fR argument specifies -their initial settings at the start of compilation and execution. The -PCRE_ANCHORED option can be set at the time of matching as well as at compile -time. -.PP -If \fIerrptr\fR is NULL, \fBpcre_compile()\fR returns NULL immediately. -Otherwise, if compilation of a pattern fails, \fBpcre_compile()\fR returns -NULL, and sets the variable pointed to by \fIerrptr\fR to point to a textual -error message. The offset from the start of the pattern to the character where -the error was discovered is placed in the variable pointed to by -\fIerroffset\fR, which must not be NULL. If it is, an immediate error is given. -.PP -If the final argument, \fItableptr\fR, is NULL, PCRE uses a default set of -character tables which are built when it is compiled, using the default C -locale. Otherwise, \fItableptr\fR must be the result of a call to -\fBpcre_maketables()\fR. See the section on locale support below. -.PP -The following option bits are defined in the header file: - - PCRE_ANCHORED - -If this bit is set, the pattern is forced to be "anchored", that is, it is -constrained to match only at the start of the string which is being searched -(the "subject string"). This effect can also be achieved by appropriate -constructs in the pattern itself, which is the only way to do it in Perl. - - PCRE_CASELESS - -If this bit is set, letters in the pattern match both upper and lower case -letters. It is equivalent to Perl's /i option. - - PCRE_DOLLAR_ENDONLY - -If this bit is set, a dollar metacharacter in the pattern matches only at the -end of the subject string. Without this option, a dollar also matches -immediately before the final character if it is a newline (but not before any -other newlines). The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is -set. There is no equivalent to this option in Perl. - - PCRE_DOTALL - -If this bit is set, a dot metacharater in the pattern matches all characters, -including newlines. Without it, newlines are excluded. This option is -equivalent to Perl's /s option. A negative class such as [^a] always matches a -newline character, independent of the setting of this option. - - PCRE_EXTENDED - -If this bit is set, whitespace data characters in the pattern are totally -ignored except when escaped or inside a character class, and characters between -an unescaped # outside a character class and the next newline character, -inclusive, are also ignored. This is equivalent to Perl's /x option, and makes -it possible to include comments inside complicated patterns. Note, however, -that this applies only to data characters. Whitespace characters may never -appear within special character sequences in a pattern, for example within the -sequence (?( which introduces a conditional subpattern. - - PCRE_EXTRA - -This option was invented in order to turn on additional functionality of PCRE -that is incompatible with Perl, but it is currently of very little use. When -set, any backslash in a pattern that is followed by a letter that has no -special meaning causes an error, thus reserving these combinations for future -expansion. By default, as in Perl, a backslash followed by a letter with no -special meaning is treated as a literal. There are at present no other features -controlled by this option. It can also be set by a (?X) option setting within a -pattern. - - PCRE_MULTILINE - -By default, PCRE treats the subject string as consisting of a single "line" of -characters (even if it actually contains several newlines). The "start of line" -metacharacter (^) matches only at the start of the string, while the "end of -line" metacharacter ($) matches only at the end of the string, or before a -terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as -Perl. - -When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs -match immediately following or immediately before any newline in the subject -string, respectively, as well as at the very start and end. This is equivalent -to Perl's /m option. If there are no "\\n" characters in a subject string, or -no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no -effect. - - PCRE_UNGREEDY - -This option inverts the "greediness" of the quantifiers so that they are not -greedy by default, but become greedy if followed by "?". It is not compatible -with Perl. It can also be set by a (?U) option setting within the pattern. - - PCRE_UTF8 - -This option causes PCRE to regard both the pattern and the subject as strings -of UTF-8 characters instead of just byte strings. However, it is available only -if PCRE has been built to include UTF-8 support. If not, the use of this option -provokes an error. Support for UTF-8 is new, experimental, and incomplete. -Details of exactly what it entails are given below. - - -.SH STUDYING A PATTERN -When a pattern is going to be used several times, it is worth spending more -time analyzing it in order to speed up the time taken for matching. The -function \fBpcre_study()\fR takes a pointer to a compiled pattern as its first -argument, and returns a pointer to a \fBpcre_extra\fR block (another \fBvoid\fR -typedef) containing additional information about the pattern; this can be -passed to \fBpcre_exec()\fR. If no additional information is available, NULL -is returned. - -The second argument contains option bits. At present, no options are defined -for \fBpcre_study()\fR, and this argument should always be zero. - -The third argument for \fBpcre_study()\fR is a pointer to an error message. If -studying succeeds (even if no data is returned), the variable it points to is -set to NULL. Otherwise it points to a textual error message. - -At present, studying a pattern is useful only for non-anchored patterns that do -not have a single fixed starting character. A bitmap of possible starting -characters is created. - - -.SH LOCALE SUPPORT -PCRE handles caseless matching, and determines whether characters are letters, -digits, or whatever, by reference to a set of tables. The library contains a -default set of tables which is created in the default C locale when PCRE is -compiled. This is used when the final argument of \fBpcre_compile()\fR is NULL, -and is sufficient for many applications. - -An alternative set of tables can, however, be supplied. Such tables are built -by calling the \fBpcre_maketables()\fR function, which has no arguments, in the -relevant locale. The result can then be passed to \fBpcre_compile()\fR as often -as necessary. For example, to build and use tables that are appropriate for the -French locale (where accented characters with codes greater than 128 are -treated as letters), the following code could be used: - - setlocale(LC_CTYPE, "fr"); - tables = pcre_maketables(); - re = pcre_compile(..., tables); - -The tables are built in memory that is obtained via \fBpcre_malloc\fR. The -pointer that is passed to \fBpcre_compile\fR is saved with the compiled -pattern, and the same tables are used via this pointer by \fBpcre_study()\fR -and \fBpcre_exec()\fR. Thus for any single pattern, compilation, studying and -matching all happen in the same locale, but different patterns can be compiled -in different locales. It is the caller's responsibility to ensure that the -memory containing the tables remains available for as long as it is needed. - - -.SH INFORMATION ABOUT A PATTERN -The \fBpcre_fullinfo()\fR function returns information about a compiled -pattern. It replaces the obsolete \fBpcre_info()\fR function, which is -nevertheless retained for backwards compability (and is documented below). - -The first argument for \fBpcre_fullinfo()\fR is a pointer to the compiled -pattern. The second argument is the result of \fBpcre_study()\fR, or NULL if -the pattern was not studied. The third argument specifies which piece of -information is required, while the fourth argument is a pointer to a variable -to receive the data. The yield of the function is zero for success, or one of -the following negative numbers: - - PCRE_ERROR_NULL the argument \fIcode\fR was NULL - the argument \fIwhere\fR was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found - PCRE_ERROR_BADOPTION the value of \fIwhat\fR was invalid - -The possible values for the third argument are defined in \fBpcre.h\fR, and are -as follows: - - PCRE_INFO_OPTIONS - -Return a copy of the options with which the pattern was compiled. The fourth -argument should point to au \fBunsigned long int\fR variable. These option bits -are those specified in the call to \fBpcre_compile()\fR, modified by any -top-level option settings within the pattern itself, and with the PCRE_ANCHORED -bit forcibly set if the form of the pattern implies that it can match only at -the start of a subject string. - - PCRE_INFO_SIZE - -Return the size of the compiled pattern, that is, the value that was passed as -the argument to \fBpcre_malloc()\fR when PCRE was getting memory in which to -place the compiled data. The fourth argument should point to a \fBsize_t\fR -variable. - - PCRE_INFO_CAPTURECOUNT - -Return the number of capturing subpatterns in the pattern. The fourth argument -should point to an \fbint\fR variable. - - PCRE_INFO_BACKREFMAX - -Return the number of the highest back reference in the pattern. The fourth -argument should point to an \fBint\fR variable. Zero is returned if there are -no back references. - - PCRE_INFO_FIRSTCHAR - -Return information about the first character of any matched string, for a -non-anchored pattern. If there is a fixed first character, e.g. from a pattern -such as (cat|cow|coyote), it is returned in the integer pointed to by -\fIwhere\fR. Otherwise, if either - -(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch -starts with "^", or - -(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set -(if it were set, the pattern would be anchored), - --1 is returned, indicating that the pattern matches only at the start of a -subject string or after any "\\n" within the string. Otherwise -2 is returned. -For anchored patterns, -2 is returned. - - PCRE_INFO_FIRSTTABLE - -If the pattern was studied, and this resulted in the construction of a 256-bit -table indicating a fixed set of characters for the first character in any -matching string, a pointer to the table is returned. Otherwise NULL is -returned. The fourth argument should point to an \fBunsigned char *\fR -variable. - - PCRE_INFO_LASTLITERAL - -For a non-anchored pattern, return the value of the rightmost literal character -which must exist in any matched string, other than at its start. The fourth -argument should point to an \fBint\fR variable. If there is no such character, -or if the pattern is anchored, -1 is returned. For example, for the pattern -/a\\d+z\\d+/ the returned value is 'z'. - -The \fBpcre_info()\fR function is now obsolete because its interface is too -restrictive to return all the available data about a compiled pattern. New -programs should use \fBpcre_fullinfo()\fR instead. The yield of -\fBpcre_info()\fR is the number of capturing subpatterns, or one of the -following negative numbers: - - PCRE_ERROR_NULL the argument \fIcode\fR was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found - -If the \fIoptptr\fR argument is not NULL, a copy of the options with which the -pattern was compiled is placed in the integer it points to (see -PCRE_INFO_OPTIONS above). - -If the pattern is not anchored and the \fIfirstcharptr\fR argument is not NULL, -it is used to pass back information about the first character of any matched -string (see PCRE_INFO_FIRSTCHAR above). - - -.SH MATCHING A PATTERN -The function \fBpcre_exec()\fR is called to match a subject string against a -pre-compiled pattern, which is passed in the \fIcode\fR argument. If the -pattern has been studied, the result of the study should be passed in the -\fIextra\fR argument. Otherwise this must be NULL. - -The PCRE_ANCHORED option can be passed in the \fIoptions\fR argument, whose -unused bits must be zero. However, if a pattern was compiled with -PCRE_ANCHORED, or turned out to be anchored by virtue of its contents, it -cannot be made unachored at matching time. - -There are also three further options that can be set only at matching time: - - PCRE_NOTBOL - -The first character of the string is not the beginning of a line, so the -circumflex metacharacter should not match before it. Setting this without -PCRE_MULTILINE (at compile time) causes circumflex never to match. - - PCRE_NOTEOL - -The end of the string is not the end of a line, so the dollar metacharacter -should not match it nor (except in multiline mode) a newline immediately before -it. Setting this without PCRE_MULTILINE (at compile time) causes dollar never -to match. - - PCRE_NOTEMPTY - -An empty string is not considered to be a valid match if this option is set. If -there are alternatives in the pattern, they are tried. If all the alternatives -match the empty string, the entire match fails. For example, if the pattern - - a?b? - -is applied to a string not beginning with "a" or "b", it matches the empty -string at the start of the subject. With PCRE_NOTEMPTY set, this match is not -valid, so PCRE searches further into the string for occurrences of "a" or "b". - -Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a special case -of a pattern match of the empty string within its \fBsplit()\fR function, and -when using the /g modifier. It is possible to emulate Perl's behaviour after -matching a null string by first trying the match again at the same offset with -PCRE_NOTEMPTY set, and then if that fails by advancing the starting offset (see -below) and trying an ordinary match again. - -The subject string is passed as a pointer in \fIsubject\fR, a length in -\fIlength\fR, and a starting offset in \fIstartoffset\fR. Unlike the pattern -string, it may contain binary zero characters. When the starting offset is -zero, the search for a match starts at the beginning of the subject, and this -is by far the most common case. - -A non-zero starting offset is useful when searching for another match in the -same subject by calling \fBpcre_exec()\fR again after a previous success. -Setting \fIstartoffset\fR differs from just passing over a shortened string and -setting PCRE_NOTBOL in the case of a pattern that begins with any kind of -lookbehind. For example, consider the pattern - - \\Biss\\B - -which finds occurrences of "iss" in the middle of words. (\\B matches only if -the current position in the subject is not a word boundary.) When applied to -the string "Mississipi" the first call to \fBpcre_exec()\fR finds the first -occurrence. If \fBpcre_exec()\fR is called again with just the remainder of the -subject, namely "issipi", it does not match, because \\B is always false at the -start of the subject, which is deemed to be a word boundary. However, if -\fBpcre_exec()\fR is passed the entire string again, but with \fIstartoffset\fR -set to 4, it finds the second occurrence of "iss" because it is able to look -behind the starting point to discover that it is preceded by a letter. - -If a non-zero starting offset is passed when the pattern is anchored, one -attempt to match at the given offset is tried. This can only succeed if the -pattern does not require the match to be at the start of the subject. - -In general, a pattern matches a certain portion of the subject, and in -addition, further substrings from the subject may be picked out by parts of the -pattern. Following the usage in Jeffrey Friedl's book, this is called -"capturing" in what follows, and the phrase "capturing subpattern" is used for -a fragment of a pattern that picks out a substring. PCRE supports several other -kinds of parenthesized subpattern that do not cause substrings to be captured. - -Captured substrings are returned to the caller via a vector of integer offsets -whose address is passed in \fIovector\fR. The number of elements in the vector -is passed in \fIovecsize\fR. The first two-thirds of the vector is used to pass -back captured substrings, each substring using a pair of integers. The -remaining third of the vector is used as workspace by \fBpcre_exec()\fR while -matching capturing subpatterns, and is not available for passing back -information. The length passed in \fIovecsize\fR should always be a multiple of -three. If it is not, it is rounded down. - -When a match has been successful, information about captured substrings is -returned in pairs of integers, starting at the beginning of \fIovector\fR, and -continuing up to two-thirds of its length at the most. The first element of a -pair is set to the offset of the first character in a substring, and the second -is set to the offset of the first character after the end of a substring. The -first pair, \fIovector[0]\fR and \fIovector[1]\fR, identify the portion of the -subject string matched by the entire pattern. The next pair is used for the -first capturing subpattern, and so on. The value returned by \fBpcre_exec()\fR -is the number of pairs that have been set. If there are no capturing -subpatterns, the return value from a successful match is 1, indicating that -just the first pair of offsets has been set. - -Some convenience functions are provided for extracting the captured substrings -as separate strings. These are described in the following section. - -It is possible for an capturing subpattern number \fIn+1\fR to match some -part of the subject when subpattern \fIn\fR has not been used at all. For -example, if the string "abc" is matched against the pattern (a|(z))(bc) -subpatterns 1 and 3 are matched, but 2 is not. When this happens, both offset -values corresponding to the unused subpattern are set to -1. - -If a capturing subpattern is matched repeatedly, it is the last portion of the -string that it matched that gets returned. - -If the vector is too small to hold all the captured substrings, it is used as -far as possible (up to two-thirds of its length), and the function returns a -value of zero. In particular, if the substring offsets are not of interest, -\fBpcre_exec()\fR may be called with \fIovector\fR passed as NULL and -\fIovecsize\fR as zero. However, if the pattern contains back references and -the \fIovector\fR isn't big enough to remember the related substrings, PCRE has -to get additional memory for use during matching. Thus it is usually advisable -to supply an \fIovector\fR. - -Note that \fBpcre_info()\fR can be used to find out how many capturing -subpatterns there are in a compiled pattern. The smallest size for -\fIovector\fR that will allow for \fIn\fR captured substrings in addition to -the offsets of the substring matched by the whole pattern is (\fIn\fR+1)*3. - -If \fBpcre_exec()\fR fails, it returns a negative number. The following are -defined in the header file: - - PCRE_ERROR_NOMATCH (-1) - -The subject string did not match the pattern. - - PCRE_ERROR_NULL (-2) - -Either \fIcode\fR or \fIsubject\fR was passed as NULL, or \fIovector\fR was -NULL and \fIovecsize\fR was not zero. - - PCRE_ERROR_BADOPTION (-3) - -An unrecognized bit was set in the \fIoptions\fR argument. - - PCRE_ERROR_BADMAGIC (-4) - -PCRE stores a 4-byte "magic number" at the start of the compiled code, to catch -the case when it is passed a junk pointer. This is the error it gives when the -magic number isn't present. - - PCRE_ERROR_UNKNOWN_NODE (-5) - -While running the pattern match, an unknown item was encountered in the -compiled pattern. This error could be caused by a bug in PCRE or by overwriting -of the compiled pattern. - - PCRE_ERROR_NOMEMORY (-6) - -If a pattern contains back references, but the \fIovector\fR that is passed to -\fBpcre_exec()\fR is not big enough to remember the referenced substrings, PCRE -gets a block of memory at the start of matching to use for this purpose. If the -call via \fBpcre_malloc()\fR fails, this error is given. The memory is freed at -the end of matching. - - -.SH EXTRACTING CAPTURED SUBSTRINGS -Captured substrings can be accessed directly by using the offsets returned by -\fBpcre_exec()\fR in \fIovector\fR. For convenience, the functions -\fBpcre_copy_substring()\fR, \fBpcre_get_substring()\fR, and -\fBpcre_get_substring_list()\fR are provided for extracting captured substrings -as new, separate, zero-terminated strings. A substring that contains a binary -zero is correctly extracted and has a further zero added on the end, but the -result does not, of course, function as a C string. - -The first three arguments are the same for all three functions: \fIsubject\fR -is the subject string which has just been successfully matched, \fIovector\fR -is a pointer to the vector of integer offsets that was passed to -\fBpcre_exec()\fR, and \fIstringcount\fR is the number of substrings that -were captured by the match, including the substring that matched the entire -regular expression. This is the value returned by \fBpcre_exec\fR if it -is greater than zero. If \fBpcre_exec()\fR returned zero, indicating that it -ran out of space in \fIovector\fR, the value passed as \fIstringcount\fR should -be the size of the vector divided by three. - -The functions \fBpcre_copy_substring()\fR and \fBpcre_get_substring()\fR -extract a single substring, whose number is given as \fIstringnumber\fR. A -value of zero extracts the substring that matched the entire pattern, while -higher values extract the captured substrings. For \fBpcre_copy_substring()\fR, -the string is placed in \fIbuffer\fR, whose length is given by -\fIbuffersize\fR, while for \fBpcre_get_substring()\fR a new block of memory is -obtained via \fBpcre_malloc\fR, and its address is returned via -\fIstringptr\fR. The yield of the function is the length of the string, not -including the terminating zero, or one of - - PCRE_ERROR_NOMEMORY (-6) - -The buffer was too small for \fBpcre_copy_substring()\fR, or the attempt to get -memory failed for \fBpcre_get_substring()\fR. - - PCRE_ERROR_NOSUBSTRING (-7) - -There is no substring whose number is \fIstringnumber\fR. - -The \fBpcre_get_substring_list()\fR function extracts all available substrings -and builds a list of pointers to them. All this is done in a single block of -memory which is obtained via \fBpcre_malloc\fR. The address of the memory block -is returned via \fIlistptr\fR, which is also the start of the list of string -pointers. The end of the list is marked by a NULL pointer. The yield of the -function is zero if all went well, or - - PCRE_ERROR_NOMEMORY (-6) - -if the attempt to get the memory block failed. - -When any of these functions encounter a substring that is unset, which can -happen when capturing subpattern number \fIn+1\fR matches some part of the -subject, but subpattern \fIn\fR has not been used at all, they return an empty -string. This can be distinguished from a genuine zero-length substring by -inspecting the appropriate offset in \fIovector\fR, which is negative for unset -substrings. - -The two convenience functions \fBpcre_free_substring()\fR and -\fBpcre_free_substring_list()\fR can be used to free the memory returned by -a previous call of \fBpcre_get_substring()\fR or -\fBpcre_get_substring_list()\fR, respectively. They do nothing more than call -the function pointed to by \fBpcre_free\fR, which of course could be called -directly from a C program. However, PCRE is used in some situations where it is -linked via a special interface to another programming language which cannot use -\fBpcre_free\fR directly; it is for these cases that the functions are -provided. - - -.SH LIMITATIONS -There are some size limitations in PCRE but it is hoped that they will never in -practice be relevant. -The maximum length of a compiled pattern is 65539 (sic) bytes. -All values in repeating quantifiers must be less than 65536. -The maximum number of capturing subpatterns is 99. -The maximum number of all parenthesized subpatterns, including capturing -subpatterns, assertions, and other types of subpattern, is 200. - -The maximum length of a subject string is the largest positive number that an -integer variable can hold. However, PCRE uses recursion to handle subpatterns -and indefinite repetition. This means that the available stack space may limit -the size of a subject string that can be processed by certain patterns. - - -.SH DIFFERENCES FROM PERL -The differences described here are with respect to Perl 5.005. - -1. By default, a whitespace character is any character that the C library -function \fBisspace()\fR recognizes, though it is possible to compile PCRE with -alternative character type tables. Normally \fBisspace()\fR matches space, -formfeed, newline, carriage return, horizontal tab, and vertical tab. Perl 5 -no longer includes vertical tab in its set of whitespace characters. The \\v -escape that was in the Perl documentation for a long time was never in fact -recognized. However, the character itself was treated as whitespace at least -up to 5.002. In 5.004 and 5.005 it does not match \\s. - -2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl permits -them, but they do not mean what you might think. For example, (?!a){3} does -not assert that the next three characters are not "a". It just asserts that the -next character is not "a" three times. - -3. Capturing subpatterns that occur inside negative lookahead assertions are -counted, but their entries in the offsets vector are never set. Perl sets its -numerical variables from any such patterns that are matched before the -assertion fails to match something (thereby succeeding), but only if the -negative lookahead assertion contains just one branch. - -4. Though binary zero characters are supported in the subject string, they are -not allowed in a pattern string because it is passed as a normal C string, -terminated by zero. The escape sequence "\\0" can be used in the pattern to -represent a binary zero. - -5. The following Perl escape sequences are not supported: \\l, \\u, \\L, \\U, -\\E, \\Q. In fact these are implemented by Perl's general string-handling and -are not part of its pattern matching engine. - -6. The Perl \\G assertion is not supported as it is not relevant to single -pattern matches. - -7. Fairly obviously, PCRE does not support the (?{code}) and (?p{code}) -constructions. However, there is some experimental support for recursive -patterns using the non-Perl item (?R). - -8. There are at the time of writing some oddities in Perl 5.005_02 concerned -with the settings of captured strings when part of a pattern is repeated. For -example, matching "aba" against the pattern /^(a(b)?)+$/ sets $2 to the value -"b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves $2 unset. However, if -the pattern is changed to /^(aa(b(b))?)+$/ then $2 (and $3) are set. - -In Perl 5.004 $2 is set in both cases, and that is also true of PCRE. If in the -future Perl changes to a consistent state that is different, PCRE may change to -follow. - -9. Another as yet unresolved discrepancy is that in Perl 5.005_02 the pattern -/^(a)?(?(1)a|b)+$/ matches the string "a", whereas in PCRE it does not. -However, in both Perl and PCRE /^(a)?a/ matched against "a" leaves $1 unset. - -10. PCRE provides some extensions to the Perl regular expression facilities: - -(a) Although lookbehind assertions must match fixed length strings, each -alternative branch of a lookbehind assertion can match a different length of -string. Perl 5.005 requires them all to have the same length. - -(b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ meta- -character matches only at the very end of the string. - -(c) If PCRE_EXTRA is set, a backslash followed by a letter with no special -meaning is faulted. - -(d) If PCRE_UNGREEDY is set, the greediness of the repetition quantifiers is -inverted, that is, by default they are not greedy, but if followed by a -question mark they are. - -(e) PCRE_ANCHORED can be used to force a pattern to be tried only at the start -of the subject. - -(f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options for -\fBpcre_exec()\fR have no Perl equivalents. - -(g) The (?R) construct allows for recursive pattern matching (Perl 5.6 can do -this using the (?p{code}) construct, which PCRE cannot of course support.) - - -.SH REGULAR EXPRESSION DETAILS -The syntax and semantics of the regular expressions supported by PCRE are -described below. Regular expressions are also described in the Perl -documentation and in a number of other books, some of which have copious -examples. Jeffrey Friedl's "Mastering Regular Expressions", published by -O'Reilly (ISBN 1-56592-257), covers them in great detail. - -The description here is intended as reference documentation. The basic -operation of PCRE is on strings of bytes. However, there is the beginnings of -some support for UTF-8 character strings. To use this support you must -configure PCRE to include it, and then call \fBpcre_compile()\fR with the -PCRE_UTF8 option. How this affects the pattern matching is described in the -final section of this document. - -A regular expression is a pattern that is matched against a subject string from -left to right. Most characters stand for themselves in a pattern, and match the -corresponding characters in the subject. As a trivial example, the pattern - - The quick brown fox - -matches a portion of a subject string that is identical to itself. The power of -regular expressions comes from the ability to include alternatives and -repetitions in the pattern. These are encoded in the pattern by the use of -\fImeta-characters\fR, which do not stand for themselves but instead are -interpreted in some special way. - -There are two different sets of meta-characters: those that are recognized -anywhere in the pattern except within square brackets, and those that are -recognized in square brackets. Outside square brackets, the meta-characters are -as follows: - - \\ general escape character with several uses - ^ assert start of subject (or line, in multiline mode) - $ assert end of subject (or line, in multiline mode) - . match any character except newline (by default) - [ start character class definition - | start of alternative branch - ( start subpattern - ) end subpattern - ? extends the meaning of ( - also 0 or 1 quantifier - also quantifier minimizer - * 0 or more quantifier - + 1 or more quantifier - { start min/max quantifier - -Part of a pattern that is in square brackets is called a "character class". In -a character class the only meta-characters are: - - \\ general escape character - ^ negate the class, but only if the first character - - indicates character range - ] terminates the character class - -The following sections describe the use of each of the meta-characters. - - -.SH BACKSLASH -The backslash character has several uses. Firstly, if it is followed by a -non-alphameric character, it takes away any special meaning that character may -have. This use of backslash as an escape character applies both inside and -outside character classes. - -For example, if you want to match a "*" character, you write "\\*" in the -pattern. This applies whether or not the following character would otherwise be -interpreted as a meta-character, so it is always safe to precede a -non-alphameric with "\\" to specify that it stands for itself. In particular, -if you want to match a backslash, you write "\\\\". - -If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the -pattern (other than in a character class) and characters between a "#" outside -a character class and the next newline character are ignored. An escaping -backslash can be used to include a whitespace or "#" character as part of the -pattern. - -A second use of backslash provides a way of encoding non-printing characters -in patterns in a visible manner. There is no restriction on the appearance of -non-printing characters, apart from the binary zero that terminates a pattern, -but when a pattern is being prepared by text editing, it is usually easier to -use one of the following escape sequences than the binary character it -represents: - - \\a alarm, that is, the BEL character (hex 07) - \\cx "control-x", where x is any character - \\e escape (hex 1B) - \\f formfeed (hex 0C) - \\n newline (hex 0A) - \\r carriage return (hex 0D) - \\t tab (hex 09) - \\xhh character with hex code hh - \\ddd character with octal code ddd, or backreference - -The precise effect of "\\cx" is as follows: if "x" is a lower case letter, it -is converted to upper case. Then bit 6 of the character (hex 40) is inverted. -Thus "\\cz" becomes hex 1A, but "\\c{" becomes hex 3B, while "\\c;" becomes hex -7B. - -After "\\x", up to two hexadecimal digits are read (letters can be in upper or -lower case). - -After "\\0" up to two further octal digits are read. In both cases, if there -are fewer than two digits, just those that are present are used. Thus the -sequence "\\0\\x\\07" specifies two binary zeros followed by a BEL character. -Make sure you supply two digits after the initial zero if the character that -follows is itself an octal digit. - -The handling of a backslash followed by a digit other than 0 is complicated. -Outside a character class, PCRE reads it and any following digits as a decimal -number. If the number is less than 10, or if there have been at least that many -previous capturing left parentheses in the expression, the entire sequence is -taken as a \fIback reference\fR. A description of how this works is given -later, following the discussion of parenthesized subpatterns. - -Inside a character class, or if the decimal number is greater than 9 and there -have not been that many capturing subpatterns, PCRE re-reads up to three octal -digits following the backslash, and generates a single byte from the least -significant 8 bits of the value. Any subsequent digits stand for themselves. -For example: - - \\040 is another way of writing a space - \\40 is the same, provided there are fewer than 40 - previous capturing subpatterns - \\7 is always a back reference - \\11 might be a back reference, or another way of - writing a tab - \\011 is always a tab - \\0113 is a tab followed by the character "3" - \\113 is the character with octal code 113 (since there - can be no more than 99 back references) - \\377 is a byte consisting entirely of 1 bits - \\81 is either a back reference, or a binary zero - followed by the two characters "8" and "1" - -Note that octal values of 100 or greater must not be introduced by a leading -zero, because no more than three octal digits are ever read. - -All the sequences that define a single byte value can be used both inside and -outside character classes. In addition, inside a character class, the sequence -"\\b" is interpreted as the backspace character (hex 08). Outside a character -class it has a different meaning (see below). - -The third use of backslash is for specifying generic character types: - - \\d any decimal digit - \\D any character that is not a decimal digit - \\s any whitespace character - \\S any character that is not a whitespace character - \\w any "word" character - \\W any "non-word" character - -Each pair of escape sequences partitions the complete set of characters into -two disjoint sets. Any given character matches one, and only one, of each pair. - -A "word" character is any letter or digit or the underscore character, that is, -any character which can be part of a Perl "word". The definition of letters and -digits is controlled by PCRE's character tables, and may vary if locale- -specific matching is taking place (see "Locale support" above). For example, in -the "fr" (French) locale, some character codes greater than 128 are used for -accented letters, and these are matched by \\w. - -These character type sequences can appear both inside and outside character -classes. They each match one character of the appropriate type. If the current -matching point is at the end of the subject string, all of them fail, since -there is no character to match. - -The fourth use of backslash is for certain simple assertions. An assertion -specifies a condition that has to be met at a particular point in a match, -without consuming any characters from the subject string. The use of -subpatterns for more complicated assertions is described below. The backslashed -assertions are - - \\b word boundary - \\B not a word boundary - \\A start of subject (independent of multiline mode) - \\Z end of subject or newline at end (independent of multiline mode) - \\z end of subject (independent of multiline mode) - -These assertions may not appear in character classes (but note that "\\b" has a -different meaning, namely the backspace character, inside a character class). - -A word boundary is a position in the subject string where the current character -and the previous character do not both match \\w or \\W (i.e. one matches -\\w and the other matches \\W), or the start or end of the string if the -first or last character matches \\w, respectively. - -The \\A, \\Z, and \\z assertions differ from the traditional circumflex and -dollar (described below) in that they only ever match at the very start and end -of the subject string, whatever options are set. They are not affected by the -PCRE_NOTBOL or PCRE_NOTEOL options. If the \fIstartoffset\fR argument of -\fBpcre_exec()\fR is non-zero, \\A can never match. The difference between \\Z -and \\z is that \\Z matches before a newline that is the last character of the -string as well as at the end of the string, whereas \\z matches only at the -end. - - -.SH CIRCUMFLEX AND DOLLAR -Outside a character class, in the default matching mode, the circumflex -character is an assertion which is true only if the current matching point is -at the start of the subject string. If the \fIstartoffset\fR argument of -\fBpcre_exec()\fR is non-zero, circumflex can never match. Inside a character -class, circumflex has an entirely different meaning (see below). - -Circumflex need not be the first character of the pattern if a number of -alternatives are involved, but it should be the first thing in each alternative -in which it appears if the pattern is ever to match that branch. If all -possible alternatives start with a circumflex, that is, if the pattern is -constrained to match only at the start of the subject, it is said to be an -"anchored" pattern. (There are also other constructs that can cause a pattern -to be anchored.) - -A dollar character is an assertion which is true only if the current matching -point is at the end of the subject string, or immediately before a newline -character that is the last character in the string (by default). Dollar need -not be the last character of the pattern if a number of alternatives are -involved, but it should be the last item in any branch in which it appears. -Dollar has no special meaning in a character class. - -The meaning of dollar can be changed so that it matches only at the very end of -the string, by setting the PCRE_DOLLAR_ENDONLY option at compile or matching -time. This does not affect the \\Z assertion. - -The meanings of the circumflex and dollar characters are changed if the -PCRE_MULTILINE option is set. When this is the case, they match immediately -after and immediately before an internal "\\n" character, respectively, in -addition to matching at the start and end of the subject string. For example, -the pattern /^abc$/ matches the subject string "def\\nabc" in multiline mode, -but not otherwise. Consequently, patterns that are anchored in single line mode -because all branches start with "^" are not anchored in multiline mode, and a -match for circumflex is possible when the \fIstartoffset\fR argument of -\fBpcre_exec()\fR is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if -PCRE_MULTILINE is set. - -Note that the sequences \\A, \\Z, and \\z can be used to match the start and -end of the subject in both modes, and if all branches of a pattern start with -\\A is it always anchored, whether PCRE_MULTILINE is set or not. - - -.SH FULL STOP (PERIOD, DOT) -Outside a character class, a dot in the pattern matches any one character in -the subject, including a non-printing character, but not (by default) newline. -If the PCRE_DOTALL option is set, dots match newlines as well. The handling of -dot is entirely independent of the handling of circumflex and dollar, the only -relationship being that they both involve newline characters. Dot has no -special meaning in a character class. - - -.SH SQUARE BRACKETS -An opening square bracket introduces a character class, terminated by a closing -square bracket. A closing square bracket on its own is not special. If a -closing square bracket is required as a member of the class, it should be the -first data character in the class (after an initial circumflex, if present) or -escaped with a backslash. - -A character class matches a single character in the subject; the character must -be in the set of characters defined by the class, unless the first character in -the class is a circumflex, in which case the subject character must not be in -the set defined by the class. If a circumflex is actually required as a member -of the class, ensure it is not the first character, or escape it with a -backslash. - -For example, the character class [aeiou] matches any lower case vowel, while -[^aeiou] matches any character that is not a lower case vowel. Note that a -circumflex is just a convenient notation for specifying the characters which -are in the class by enumerating those that are not. It is not an assertion: it -still consumes a character from the subject string, and fails if the current -pointer is at the end of the string. - -When caseless matching is set, any letters in a class represent both their -upper case and lower case versions, so for example, a caseless [aeiou] matches -"A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a -caseful version would. - -The newline character is never treated in any special way in character classes, -whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class -such as [^a] will always match a newline. - -The minus (hyphen) character can be used to specify a range of characters in a -character class. For example, [d-m] matches any letter between d and m, -inclusive. If a minus character is required in a class, it must be escaped with -a backslash or appear in a position where it cannot be interpreted as -indicating a range, typically as the first or last character in the class. - -It is not possible to have the literal character "]" as the end character of a -range. A pattern such as [W-]46] is interpreted as a class of two characters -("W" and "-") followed by a literal string "46]", so it would match "W46]" or -"-46]". However, if the "]" is escaped with a backslash it is interpreted as -the end of range, so [W-\\]46] is interpreted as a single class containing a -range followed by two separate characters. The octal or hexadecimal -representation of "]" can also be used to end a range. - -Ranges operate in ASCII collating sequence. They can also be used for -characters specified numerically, for example [\\000-\\037]. If a range that -includes letters is used when caseless matching is set, it matches the letters -in either case. For example, [W-c] is equivalent to [][\\^_`wxyzabc], matched -caselessly, and if character tables for the "fr" locale are in use, -[\\xc8-\\xcb] matches accented E characters in both cases. - -The character types \\d, \\D, \\s, \\S, \\w, and \\W may also appear in a -character class, and add the characters that they match to the class. For -example, [\\dABCDEF] matches any hexadecimal digit. A circumflex can -conveniently be used with the upper case character types to specify a more -restricted set of characters than the matching lower case type. For example, -the class [^\\W_] matches any letter or digit, but not underscore. - -All non-alphameric characters other than \\, -, ^ (at the start) and the -terminating ] are non-special in character classes, but it does no harm if they -are escaped. - - -.SH POSIX CHARACTER CLASSES -Perl 5.6 (not yet released at the time of writing) is going to support the -POSIX notation for character classes, which uses names enclosed by [: and :] -within the enclosing square brackets. PCRE supports this notation. For example, - - [01[:alpha:]%] - -matches "0", "1", any alphabetic character, or "%". The supported class names -are - - alnum letters and digits - alpha letters - ascii character codes 0 - 127 - cntrl control characters - digit decimal digits (same as \\d) - graph printing characters, excluding space - lower lower case letters - print printing characters, including space - punct printing characters, excluding letters and digits - space white space (same as \\s) - upper upper case letters - word "word" characters (same as \\w) - xdigit hexadecimal digits - -The names "ascii" and "word" are Perl extensions. Another Perl extension is -negation, which is indicated by a ^ character after the colon. For example, - - [12[:^digit:]] - -matches "1", "2", or any non-digit. PCRE (and Perl) also recogize the POSIX -syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not -supported, and an error is given if they are encountered. - - -.SH VERTICAL BAR -Vertical bar characters are used to separate alternative patterns. For example, -the pattern - - gilbert|sullivan - -matches either "gilbert" or "sullivan". Any number of alternatives may appear, -and an empty alternative is permitted (matching the empty string). -The matching process tries each alternative in turn, from left to right, -and the first one that succeeds is used. If the alternatives are within a -subpattern (defined below), "succeeds" means matching the rest of the main -pattern as well as the alternative in the subpattern. - - -.SH INTERNAL OPTION SETTING -The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED -can be changed from within the pattern by a sequence of Perl option letters -enclosed between "(?" and ")". The option letters are - - i for PCRE_CASELESS - m for PCRE_MULTILINE - s for PCRE_DOTALL - x for PCRE_EXTENDED - -For example, (?im) sets caseless, multiline matching. It is also possible to -unset these options by preceding the letter with a hyphen, and a combined -setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and -PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also -permitted. If a letter appears both before and after the hyphen, the option is -unset. - -The scope of these option changes depends on where in the pattern the setting -occurs. For settings that are outside any subpattern (defined below), the -effect is the same as if the options were set or unset at the start of -matching. The following patterns all behave in exactly the same way: - - (?i)abc - a(?i)bc - ab(?i)c - abc(?i) - -which in turn is the same as compiling the pattern abc with PCRE_CASELESS set. -In other words, such "top level" settings apply to the whole pattern (unless -there are other changes inside subpatterns). If there is more than one setting -of the same option at top level, the rightmost setting is used. - -If an option change occurs inside a subpattern, the effect is different. This -is a change of behaviour in Perl 5.005. An option change inside a subpattern -affects only that part of the subpattern that follows it, so - - (a(?i)b)c - -matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used). -By this means, options can be made to have different settings in different -parts of the pattern. Any changes made in one alternative do carry on -into subsequent branches within the same subpattern. For example, - - (a(?i)b|c) - -matches "ab", "aB", "c", and "C", even though when matching "C" the first -branch is abandoned before the option setting. This is because the effects of -option settings happen at compile time. There would be some very weird -behaviour otherwise. - -The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the -same way as the Perl-compatible options by using the characters U and X -respectively. The (?X) flag setting is special in that it must always occur -earlier in the pattern than any of the additional features it turns on, even -when it is at top level. It is best put at the start. - - -.SH SUBPATTERNS -Subpatterns are delimited by parentheses (round brackets), which can be nested. -Marking part of a pattern as a subpattern does two things: - -1. It localizes a set of alternatives. For example, the pattern - - cat(aract|erpillar|) - -matches one of the words "cat", "cataract", or "caterpillar". Without the -parentheses, it would match "cataract", "erpillar" or the empty string. - -2. It sets up the subpattern as a capturing subpattern (as defined above). -When the whole pattern matches, that portion of the subject string that matched -the subpattern is passed back to the caller via the \fIovector\fR argument of -\fBpcre_exec()\fR. Opening parentheses are counted from left to right (starting -from 1) to obtain the numbers of the capturing subpatterns. - -For example, if the string "the red king" is matched against the pattern - - the ((red|white) (king|queen)) - -the captured substrings are "red king", "red", and "king", and are numbered 1, -2, and 3. - -The fact that plain parentheses fulfil two functions is not always helpful. -There are often times when a grouping subpattern is required without a -capturing requirement. If an opening parenthesis is followed by "?:", the -subpattern does not do any capturing, and is not counted when computing the -number of any subsequent capturing subpatterns. For example, if the string "the -white queen" is matched against the pattern - - the ((?:red|white) (king|queen)) - -the captured substrings are "white queen" and "queen", and are numbered 1 and -2. The maximum number of captured substrings is 99, and the maximum number of -all subpatterns, both capturing and non-capturing, is 200. - -As a convenient shorthand, if any option settings are required at the start of -a non-capturing subpattern, the option letters may appear between the "?" and -the ":". Thus the two patterns - - (?i:saturday|sunday) - (?:(?i)saturday|sunday) - -match exactly the same set of strings. Because alternative branches are tried -from left to right, and options are not reset until the end of the subpattern -is reached, an option setting in one branch does affect subsequent branches, so -the above patterns match "SUNDAY" as well as "Saturday". - - -.SH REPETITION -Repetition is specified by quantifiers, which can follow any of the following -items: - - a single character, possibly escaped - the . metacharacter - a character class - a back reference (see next section) - a parenthesized subpattern (unless it is an assertion - see below) - -The general repetition quantifier specifies a minimum and maximum number of -permitted matches, by giving the two numbers in curly brackets (braces), -separated by a comma. The numbers must be less than 65536, and the first must -be less than or equal to the second. For example: - - z{2,4} - -matches "zz", "zzz", or "zzzz". A closing brace on its own is not a special -character. If the second number is omitted, but the comma is present, there is -no upper limit; if the second number and the comma are both omitted, the -quantifier specifies an exact number of required matches. Thus - - [aeiou]{3,} - -matches at least 3 successive vowels, but may match many more, while - - \\d{8} - -matches exactly 8 digits. An opening curly bracket that appears in a position -where a quantifier is not allowed, or one that does not match the syntax of a -quantifier, is taken as a literal character. For example, {,6} is not a -quantifier, but a literal string of four characters. - -The quantifier {0} is permitted, causing the expression to behave as if the -previous item and the quantifier were not present. - -For convenience (and historical compatibility) the three most common -quantifiers have single-character abbreviations: - - * is equivalent to {0,} - + is equivalent to {1,} - ? is equivalent to {0,1} - -It is possible to construct infinite loops by following a subpattern that can -match no characters with a quantifier that has no upper limit, for example: - - (a?)* - -Earlier versions of Perl and PCRE used to give an error at compile time for -such patterns. However, because there are cases where this can be useful, such -patterns are now accepted, but if any repetition of the subpattern does in fact -match no characters, the loop is forcibly broken. - -By default, the quantifiers are "greedy", that is, they match as much as -possible (up to the maximum number of permitted times), without causing the -rest of the pattern to fail. The classic example of where this gives problems -is in trying to match comments in C programs. These appear between the -sequences /* and */ and within the sequence, individual * and / characters may -appear. An attempt to match C comments by applying the pattern - - /\\*.*\\*/ - -to the string - - /* first command */ not comment /* second comment */ - -fails, because it matches the entire string owing to the greediness of the .* -item. - -However, if a quantifier is followed by a question mark, it ceases to be -greedy, and instead matches the minimum number of times possible, so the -pattern - - /\\*.*?\\*/ - -does the right thing with the C comments. The meaning of the various -quantifiers is not otherwise changed, just the preferred number of matches. -Do not confuse this use of question mark with its use as a quantifier in its -own right. Because it has two uses, it can sometimes appear doubled, as in - - \\d??\\d - -which matches one digit by preference, but can match two if that is the only -way the rest of the pattern matches. - -If the PCRE_UNGREEDY option is set (an option which is not available in Perl), -the quantifiers are not greedy by default, but individual ones can be made -greedy by following them with a question mark. In other words, it inverts the -default behaviour. - -When a parenthesized subpattern is quantified with a minimum repeat count that -is greater than 1 or with a limited maximum, more store is required for the -compiled pattern, in proportion to the size of the minimum or maximum. - -If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent -to Perl's /s) is set, thus allowing the . to match newlines, the pattern is -implicitly anchored, because whatever follows will be tried against every -character position in the subject string, so there is no point in retrying the -overall match at any position after the first. PCRE treats such a pattern as -though it were preceded by \\A. In cases where it is known that the subject -string contains no newlines, it is worth setting PCRE_DOTALL when the pattern -begins with .* in order to obtain this optimization, or alternatively using ^ -to indicate anchoring explicitly. - -When a capturing subpattern is repeated, the value captured is the substring -that matched the final iteration. For example, after - - (tweedle[dume]{3}\\s*)+ - -has matched "tweedledum tweedledee" the value of the captured substring is -"tweedledee". However, if there are nested capturing subpatterns, the -corresponding captured values may have been set in previous iterations. For -example, after - - /(a|(b))+/ - -matches "aba" the value of the second captured substring is "b". - - -.SH BACK REFERENCES -Outside a character class, a backslash followed by a digit greater than 0 (and -possibly further digits) is a back reference to a capturing subpattern earlier -(i.e. to its left) in the pattern, provided there have been that many previous -capturing left parentheses. - -However, if the decimal number following the backslash is less than 10, it is -always taken as a back reference, and causes an error only if there are not -that many capturing left parentheses in the entire pattern. In other words, the -parentheses that are referenced need not be to the left of the reference for -numbers less than 10. See the section entitled "Backslash" above for further -details of the handling of digits following a backslash. - -A back reference matches whatever actually matched the capturing subpattern in -the current subject string, rather than anything matching the subpattern -itself. So the pattern - - (sens|respons)e and \\1ibility - -matches "sense and sensibility" and "response and responsibility", but not -"sense and responsibility". If caseful matching is in force at the time of the -back reference, the case of letters is relevant. For example, - - ((?i)rah)\\s+\\1 - -matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original -capturing subpattern is matched caselessly. - -There may be more than one back reference to the same subpattern. If a -subpattern has not actually been used in a particular match, any back -references to it always fail. For example, the pattern - - (a|(bc))\\2 - -always fails if it starts to match "a" rather than "bc". Because there may be -up to 99 back references, all digits following the backslash are taken -as part of a potential back reference number. If the pattern continues with a -digit character, some delimiter must be used to terminate the back reference. -If the PCRE_EXTENDED option is set, this can be whitespace. Otherwise an empty -comment can be used. - -A back reference that occurs inside the parentheses to which it refers fails -when the subpattern is first used, so, for example, (a\\1) never matches. -However, such references can be useful inside repeated subpatterns. For -example, the pattern - - (a|b\\1)+ - -matches any number of "a"s and also "aba", "ababbaa" etc. At each iteration of -the subpattern, the back reference matches the character string corresponding -to the previous iteration. In order for this to work, the pattern must be such -that the first iteration does not need to match the back reference. This can be -done using alternation, as in the example above, or by a quantifier with a -minimum of zero. - - -.SH ASSERTIONS -An assertion is a test on the characters following or preceding the current -matching point that does not actually consume any characters. The simple -assertions coded as \\b, \\B, \\A, \\Z, \\z, ^ and $ are described above. More -complicated assertions are coded as subpatterns. There are two kinds: those -that look ahead of the current position in the subject string, and those that -look behind it. - -An assertion subpattern is matched in the normal way, except that it does not -cause the current matching position to be changed. Lookahead assertions start -with (?= for positive assertions and (?! for negative assertions. For example, - - \\w+(?=;) - -matches a word followed by a semicolon, but does not include the semicolon in -the match, and - - foo(?!bar) - -matches any occurrence of "foo" that is not followed by "bar". Note that the -apparently similar pattern - - (?!foo)bar - -does not find an occurrence of "bar" that is preceded by something other than -"foo"; it finds any occurrence of "bar" whatsoever, because the assertion -(?!foo) is always true when the next three characters are "bar". A -lookbehind assertion is needed to achieve this effect. - -Lookbehind assertions start with (?<= for positive assertions and (?<! for -negative assertions. For example, - - (?<!foo)bar - -does find an occurrence of "bar" that is not preceded by "foo". The contents of -a lookbehind assertion are restricted such that all the strings it matches must -have a fixed length. However, if there are several alternatives, they do not -all have to have the same fixed length. Thus - - (?<=bullock|donkey) - -is permitted, but - - (?<!dogs?|cats?) - -causes an error at compile time. Branches that match different length strings -are permitted only at the top level of a lookbehind assertion. This is an -extension compared with Perl 5.005, which requires all branches to match the -same length of string. An assertion such as - - (?<=ab(c|de)) - -is not permitted, because its single top-level branch can match two different -lengths, but it is acceptable if rewritten to use two top-level branches: - - (?<=abc|abde) - -The implementation of lookbehind assertions is, for each alternative, to -temporarily move the current position back by the fixed width and then try to -match. If there are insufficient characters before the current position, the -match is deemed to fail. Lookbehinds in conjunction with once-only subpatterns -can be particularly useful for matching at the ends of strings; an example is -given at the end of the section on once-only subpatterns. - -Several assertions (of any sort) may occur in succession. For example, - - (?<=\\d{3})(?<!999)foo - -matches "foo" preceded by three digits that are not "999". Notice that each of -the assertions is applied independently at the same point in the subject -string. First there is a check that the previous three characters are all -digits, and then there is a check that the same three characters are not "999". -This pattern does \fInot\fR match "foo" preceded by six characters, the first -of which are digits and the last three of which are not "999". For example, it -doesn't match "123abcfoo". A pattern to do that is - - (?<=\\d{3}...)(?<!999)foo - -This time the first assertion looks at the preceding six characters, checking -that the first three are digits, and then the second assertion checks that the -preceding three characters are not "999". - -Assertions can be nested in any combination. For example, - - (?<=(?<!foo)bar)baz - -matches an occurrence of "baz" that is preceded by "bar" which in turn is not -preceded by "foo", while - - (?<=\\d{3}(?!999)...)foo - -is another pattern which matches "foo" preceded by three digits and any three -characters that are not "999". - -Assertion subpatterns are not capturing subpatterns, and may not be repeated, -because it makes no sense to assert the same thing several times. If any kind -of assertion contains capturing subpatterns within it, these are counted for -the purposes of numbering the capturing subpatterns in the whole pattern. -However, substring capturing is carried out only for positive assertions, -because it does not make sense for negative assertions. - -Assertions count towards the maximum of 200 parenthesized subpatterns. - - -.SH ONCE-ONLY SUBPATTERNS -With both maximizing and minimizing repetition, failure of what follows -normally causes the repeated item to be re-evaluated to see if a different -number of repeats allows the rest of the pattern to match. Sometimes it is -useful to prevent this, either to change the nature of the match, or to cause -it fail earlier than it otherwise might, when the author of the pattern knows -there is no point in carrying on. - -Consider, for example, the pattern \\d+foo when applied to the subject line - - 123456bar - -After matching all 6 digits and then failing to match "foo", the normal -action of the matcher is to try again with only 5 digits matching the \\d+ -item, and then with 4, and so on, before ultimately failing. Once-only -subpatterns provide the means for specifying that once a portion of the pattern -has matched, it is not to be re-evaluated in this way, so the matcher would -give up immediately on failing to match "foo" the first time. The notation is -another kind of special parenthesis, starting with (?> as in this example: - - (?>\\d+)bar - -This kind of parenthesis "locks up" the part of the pattern it contains once -it has matched, and a failure further into the pattern is prevented from -backtracking into it. Backtracking past it to previous items, however, works as -normal. - -An alternative description is that a subpattern of this type matches the string -of characters that an identical standalone pattern would match, if anchored at -the current point in the subject string. - -Once-only subpatterns are not capturing subpatterns. Simple cases such as the -above example can be thought of as a maximizing repeat that must swallow -everything it can. So, while both \\d+ and \\d+? are prepared to adjust the -number of digits they match in order to make the rest of the pattern match, -(?>\\d+) can only match an entire sequence of digits. - -This construction can of course contain arbitrarily complicated subpatterns, -and it can be nested. - -Once-only subpatterns can be used in conjunction with lookbehind assertions to -specify efficient matching at the end of the subject string. Consider a simple -pattern such as - - abcd$ - -when applied to a long string which does not match. Because matching proceeds -from left to right, PCRE will look for each "a" in the subject and then see if -what follows matches the rest of the pattern. If the pattern is specified as - - ^.*abcd$ - -the initial .* matches the entire string at first, but when this fails (because -there is no following "a"), it backtracks to match all but the last character, -then all but the last two characters, and so on. Once again the search for "a" -covers the entire string, from right to left, so we are no better off. However, -if the pattern is written as - - ^(?>.*)(?<=abcd) - -there can be no backtracking for the .* item; it can match only the entire -string. The subsequent lookbehind assertion does a single test on the last four -characters. If it fails, the match fails immediately. For long strings, this -approach makes a significant difference to the processing time. - -When a pattern contains an unlimited repeat inside a subpattern that can itself -be repeated an unlimited number of times, the use of a once-only subpattern is -the only way to avoid some failing matches taking a very long time indeed. -The pattern - - (\\D+|<\\d+>)*[!?] - -matches an unlimited number of substrings that either consist of non-digits, or -digits enclosed in <>, followed by either ! or ?. When it matches, it runs -quickly. However, if it is applied to - - aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa - -it takes a long time before reporting failure. This is because the string can -be divided between the two repeats in a large number of ways, and all have to -be tried. (The example used [!?] rather than a single character at the end, -because both PCRE and Perl have an optimization that allows for fast failure -when a single character is used. They remember the last single character that -is required for a match, and fail early if it is not present in the string.) -If the pattern is changed to - - ((?>\\D+)|<\\d+>)*[!?] - -sequences of non-digits cannot be broken, and failure happens quickly. - - -.SH CONDITIONAL SUBPATTERNS -It is possible to cause the matching process to obey a subpattern -conditionally or to choose between two alternative subpatterns, depending on -the result of an assertion, or whether a previous capturing subpattern matched -or not. The two possible forms of conditional subpattern are - - (?(condition)yes-pattern) - (?(condition)yes-pattern|no-pattern) - -If the condition is satisfied, the yes-pattern is used; otherwise the -no-pattern (if present) is used. If there are more than two alternatives in the -subpattern, a compile-time error occurs. - -There are two kinds of condition. If the text between the parentheses consists -of a sequence of digits, the condition is satisfied if the capturing subpattern -of that number has previously matched. The number must be greater than zero. -Consider the following pattern, which contains non-significant white space to -make it more readable (assume the PCRE_EXTENDED option) and to divide it into -three parts for ease of discussion: - - ( \$ )? [^()]+ (?(1) \$ ) - -The first part matches an optional opening parenthesis, and if that -character is present, sets it as the first captured substring. The second part -matches one or more characters that are not parentheses. The third part is a -conditional subpattern that tests whether the first set of parentheses matched -or not. If they did, that is, if subject started with an opening parenthesis, -the condition is true, and so the yes-pattern is executed and a closing -parenthesis is required. Otherwise, since no-pattern is not present, the -subpattern matches nothing. In other words, this pattern matches a sequence of -non-parentheses, optionally enclosed in parentheses. - -If the condition is not a sequence of digits, it must be an assertion. This may -be a positive or negative lookahead or lookbehind assertion. Consider this -pattern, again containing non-significant white space, and with the two -alternatives on the second line: - - (?(?=[^a-z]*[a-z]) - \\d{2}-[a-z]{3}-\\d{2} | \\d{2}-\\d{2}-\\d{2} ) - -The condition is a positive lookahead assertion that matches an optional -sequence of non-letters followed by a letter. In other words, it tests for the -presence of at least one letter in the subject. If a letter is found, the -subject is matched against the first alternative; otherwise it is matched -against the second. This pattern matches strings in one of the two forms -dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits. - - -.SH COMMENTS -The sequence (?# marks the start of a comment which continues up to the next -closing parenthesis. Nested parentheses are not permitted. The characters -that make up a comment play no part in the pattern matching at all. - -If the PCRE_EXTENDED option is set, an unescaped # character outside a -character class introduces a comment that continues up to the next newline -character in the pattern. - - -.SH RECURSIVE PATTERNS -Consider the problem of matching a string in parentheses, allowing for -unlimited nested parentheses. Without the use of recursion, the best that can -be done is to use a pattern that matches up to some fixed depth of nesting. It -is not possible to handle an arbitrary nesting depth. Perl 5.6 has provided an -experimental facility that allows regular expressions to recurse (amongst other -things). It does this by interpolating Perl code in the expression at run time, -and the code can refer to the expression itself. A Perl pattern to solve the -parentheses problem can be created like this: - - $re = qr{\$ (?: (?>[^()]+) | (?p{$re}) )* \$}x; - -The (?p{...}) item interpolates Perl code at run time, and in this case refers -recursively to the pattern in which it appears. Obviously, PCRE cannot support -the interpolation of Perl code. Instead, the special item (?R) is provided for -the specific case of recursion. This PCRE pattern solves the parentheses -problem (assume the PCRE_EXTENDED option is set so that white space is -ignored): - - \$ ( (?>[^()]+) | (?R) )* \$ - -First it matches an opening parenthesis. Then it matches any number of -substrings which can either be a sequence of non-parentheses, or a recursive -match of the pattern itself (i.e. a correctly parenthesized substring). Finally -there is a closing parenthesis. - -This particular example pattern contains nested unlimited repeats, and so the -use of a once-only subpattern for matching strings of non-parentheses is -important when applying the pattern to strings that do not match. For example, -when it is applied to - - (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa() - -it yields "no match" quickly. However, if a once-only subpattern is not used, -the match runs for a very long time indeed because there are so many different -ways the + and * repeats can carve up the subject, and all have to be tested -before failure can be reported. - -The values set for any capturing subpatterns are those from the outermost level -of the recursion at which the subpattern value is set. If the pattern above is -matched against - - (ab(cd)ef) - -the value for the capturing parentheses is "ef", which is the last value taken -on at the top level. If additional parentheses are added, giving - - \$ ( ( (?>[^()]+) | (?R) )* ) \$ - ^ ^ - ^ ^ -the string they capture is "ab(cd)ef", the contents of the top level -parentheses. If there are more than 15 capturing parentheses in a pattern, PCRE -has to obtain extra memory to store data during a recursion, which it does by -using \fBpcre_malloc\fR, freeing it via \fBpcre_free\fR afterwards. If no -memory can be obtained, it saves data for the first 15 capturing parentheses -only, as there is no way to give an out-of-memory error from within a -recursion. - - -.SH PERFORMANCE -Certain items that may appear in patterns are more efficient than others. It is -more efficient to use a character class like [aeiou] than a set of alternatives -such as (a|e|i|o|u). In general, the simplest construction that provides the -required behaviour is usually the most efficient. Jeffrey Friedl's book -contains a lot of discussion about optimizing regular expressions for efficient -performance. - -When a pattern begins with .* and the PCRE_DOTALL option is set, the pattern is -implicitly anchored by PCRE, since it can match only at the start of a subject -string. However, if PCRE_DOTALL is not set, PCRE cannot make this optimization, -because the . metacharacter does not then match a newline, and if the subject -string contains newlines, the pattern may match from the character immediately -following one of them instead of from the very start. For example, the pattern - - (.*) second - -matches the subject "first\\nand second" (where \\n stands for a newline -character) with the first captured substring being "and". In order to do this, -PCRE has to retry the match starting after every newline in the subject. - -If you are using such a pattern with subject strings that do not contain -newlines, the best performance is obtained by setting PCRE_DOTALL, or starting -the pattern with ^.* to indicate explicit anchoring. That saves PCRE from -having to scan along the subject looking for a newline to restart at. - -Beware of patterns that contain nested indefinite repeats. These can take a -long time to run when applied to a string that does not match. Consider the -pattern fragment - - (a+)* - -This can match "aaaa" in 33 different ways, and this number increases very -rapidly as the string gets longer. (The * repeat can match 0, 1, 2, 3, or 4 -times, and for each of those cases other than 0, the + repeats can match -different numbers of times.) When the remainder of the pattern is such that the -entire match is going to fail, PCRE has in principle to try every possible -variation, and this can take an extremely long time. - -An optimization catches some of the more simple cases such as - - (a+)*b - -where a literal character follows. Before embarking on the standard matching -procedure, PCRE checks that there is a "b" later in the subject string, and if -there is not, it fails the match immediately. However, when there is no -following literal this optimization cannot be used. You can see the difference -by comparing the behaviour of - - (a+)*\\d - -with the pattern above. The former gives a failure almost instantly when -applied to a whole line of "a" characters, whereas the latter takes an -appreciable time with strings longer than about 20 characters. - - -.SH UTF-8 SUPPORT -Starting at release 3.3, PCRE has some support for character strings encoded -in the UTF-8 format. This is incomplete, and is regarded as experimental. In -order to use it, you must configure PCRE to include UTF-8 support in the code, -and, in addition, you must call \fBpcre_compile()\fR with the PCRE_UTF8 option -flag. When you do this, both the pattern and any subject strings that are -matched against it are treated as UTF-8 strings instead of just strings of -bytes, but only in the cases that are mentioned below. - -If you compile PCRE with UTF-8 support, but do not use it at run time, the -library will be a bit bigger, but the additional run time overhead is limited -to testing the PCRE_UTF8 flag in several places, so should not be very large. - -PCRE assumes that the strings it is given contain valid UTF-8 codes. It does -not diagnose invalid UTF-8 strings. If you pass invalid UTF-8 strings to PCRE, -the results are undefined. - -Running with PCRE_UTF8 set causes these changes in the way PCRE works: - -1. In a pattern, the escape sequence \\x{...}, where the contents of the braces -is a string of hexadecimal digits, is interpreted as a UTF-8 character whose -code number is the given hexadecimal number, for example: \\x{1234}. This -inserts from one to six literal bytes into the pattern, using the UTF-8 -encoding. If a non-hexadecimal digit appears between the braces, the item is -not recognized. - -2. The original hexadecimal escape sequence, \\xhh, generates a two-byte UTF-8 -character if its value is greater than 127. - -3. Repeat quantifiers are NOT correctly handled if they follow a multibyte -character. For example, \\x{100}* and \\xc3+ do not work. If you want to -repeat such characters, you must enclose them in non-capturing parentheses, -for example (?:\\x{100}), at present. - -4. The dot metacharacter matches one UTF-8 character instead of a single byte. - -5. Unlike literal UTF-8 characters, the dot metacharacter followed by a -repeat quantifier does operate correctly on UTF-8 characters instead of -single bytes. - -4. Although the \\x{...} escape is permitted in a character class, characters -whose values are greater than 255 cannot be included in a class. - -5. A class is matched against a UTF-8 character instead of just a single byte, -but it can match only characters whose values are less than 256. Characters -with greater values always fail to match a class. - -6. Repeated classes work correctly on multiple characters. - -7. Classes containing just a single character whose value is greater than 127 -(but less than 256), for example, [\\x80] or [^\\x{93}], do not work because -these are optimized into single byte matches. In the first case, of course, -the class brackets are just redundant. - -8. Lookbehind assertions move backwards in the subject by a fixed number of -characters instead of a fixed number of bytes. Simple cases have been tested -to work correctly, but there may be hidden gotchas herein. - -9. The character types such as \\d and \\w do not work correctly with UTF-8 -characters. They continue to test a single byte. - -10. Anything not explicitly mentioned here continues to work in bytes rather -than in characters. - -The following UTF-8 features of Perl 5.6 are not implemented: - -1. The escape sequence \\C to match a single byte. - -2. The use of Unicode tables and properties and escapes \\p, \\P, and \\X. - -.SH AUTHOR -Philip Hazel <ph10(a)cam.ac.uk> -.br -University Computing Service, -.br -New Museums Site, -.br -Cambridge CB2 3QG, England. -.br -Phone: +44 1223 334714 - -Last updated: 28 August 2000, -.br - the 250th anniversary of the death of J.S. Bach. -.br -Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcre.html b/external/privoxy/pcre/doc/pcre.html deleted file mode 100644 index b12b212..0000000 --- a/external/privoxy/pcre/doc/pcre.html +++ /dev/null @@ -1,2397 +0,0 @@ -<HTML> -<HEAD> -<TITLE>pcre specification</TITLE> -</HEAD> -<body bgcolor="#FFFFFF" text="#00005A"> -<H1>pcre specification</H1> -This HTML document has been generated automatically from the original man page. -If there is any nonsense in it, please consult the man page in case the -conversion went wrong. -<UL> -<LI><A NAME="TOC1" HREF="#SEC1">NAME</A> -<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A> -<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A> -<LI><A NAME="TOC4" HREF="#SEC4">MULTI-THREADING</A> -<LI><A NAME="TOC5" HREF="#SEC5">COMPILING A PATTERN</A> -<LI><A NAME="TOC6" HREF="#SEC6">STUDYING A PATTERN</A> -<LI><A NAME="TOC7" HREF="#SEC7">LOCALE SUPPORT</A> -<LI><A NAME="TOC8" HREF="#SEC8">INFORMATION ABOUT A PATTERN</A> -<LI><A NAME="TOC9" HREF="#SEC9">MATCHING A PATTERN</A> -<LI><A NAME="TOC10" HREF="#SEC10">EXTRACTING CAPTURED SUBSTRINGS</A> -<LI><A NAME="TOC11" HREF="#SEC11">LIMITATIONS</A> -<LI><A NAME="TOC12" HREF="#SEC12">DIFFERENCES FROM PERL</A> -<LI><A NAME="TOC13" HREF="#SEC13">REGULAR EXPRESSION DETAILS</A> -<LI><A NAME="TOC14" HREF="#SEC14">BACKSLASH</A> -<LI><A NAME="TOC15" HREF="#SEC15">CIRCUMFLEX AND DOLLAR</A> -<LI><A NAME="TOC16" HREF="#SEC16">FULL STOP (PERIOD, DOT)</A> -<LI><A NAME="TOC17" HREF="#SEC17">SQUARE BRACKETS</A> -<LI><A NAME="TOC18" HREF="#SEC18">POSIX CHARACTER CLASSES</A> -<LI><A NAME="TOC19" HREF="#SEC19">VERTICAL BAR</A> -<LI><A NAME="TOC20" HREF="#SEC20">INTERNAL OPTION SETTING</A> -<LI><A NAME="TOC21" HREF="#SEC21">SUBPATTERNS</A> -<LI><A NAME="TOC22" HREF="#SEC22">REPETITION</A> -<LI><A NAME="TOC23" HREF="#SEC23">BACK REFERENCES</A> -<LI><A NAME="TOC24" HREF="#SEC24">ASSERTIONS</A> -<LI><A NAME="TOC25" HREF="#SEC25">ONCE-ONLY SUBPATTERNS</A> -<LI><A NAME="TOC26" HREF="#SEC26">CONDITIONAL SUBPATTERNS</A> -<LI><A NAME="TOC27" HREF="#SEC27">COMMENTS</A> -<LI><A NAME="TOC28" HREF="#SEC28">RECURSIVE PATTERNS</A> -<LI><A NAME="TOC29" HREF="#SEC29">PERFORMANCE</A> -<LI><A NAME="TOC30" HREF="#SEC30">UTF-8 SUPPORT</A> -<LI><A NAME="TOC31" HREF="#SEC31">AUTHOR</A> -</UL> -<LI><A NAME="SEC1" HREF="#TOC1">NAME</A> -<P> -pcre - Perl-compatible regular expressions. -</P> -<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A> -<P> -<B>#include <pcre.h></B> -</P> -<P> -<B>pcre *pcre_compile(const char *<I>pattern</I>, int <I>options</I>,</B> -<B>const char **<I>errptr</I>, int *<I>erroffset</I>,</B> -<B>const unsigned char *<I>tableptr</I>);</B> -</P> -<P> -<B>pcre_extra *pcre_study(const pcre *<I>code</I>, int <I>options</I>,</B> -<B>const char **<I>errptr</I>);</B> -</P> -<P> -<B>int pcre_exec(const pcre *<I>code</I>, const pcre_extra *<I>extra</I>,</B> -<B>const char *<I>subject</I>, int <I>length</I>, int <I>startoffset</I>,</B> -<B>int <I>options</I>, int *<I>ovector</I>, int <I>ovecsize</I>);</B> -</P> -<P> -<B>int pcre_copy_substring(const char *<I>subject</I>, int *<I>ovector</I>,</B> -<B>int <I>stringcount</I>, int <I>stringnumber</I>, char *<I>buffer</I>,</B> -<B>int <I>buffersize</I>);</B> -</P> -<P> -<B>int pcre_get_substring(const char *<I>subject</I>, int *<I>ovector</I>,</B> -<B>int <I>stringcount</I>, int <I>stringnumber</I>,</B> -<B>const char **<I>stringptr</I>);</B> -</P> -<P> -<B>int pcre_get_substring_list(const char *<I>subject</I>,</B> -<B>int *<I>ovector</I>, int <I>stringcount</I>, const char ***<I>listptr</I>);</B> -</P> -<P> -<B>void pcre_free_substring(const char *<I>stringptr</I>);</B> -</P> -<P> -<B>void pcre_free_substring_list(const char **<I>stringptr</I>);</B> -</P> -<P> -<B>const unsigned char *pcre_maketables(void);</B> -</P> -<P> -<B>int pcre_fullinfo(const pcre *<I>code</I>, const pcre_extra *<I>extra</I>,</B> -<B>int <I>what</I>, void *<I>where</I>);</B> -</P> -<P> -<B>int pcre_info(const pcre *<I>code</I>, int *<I>optptr</I>, int</B> -<B>*<I>firstcharptr</I>);</B> -</P> -<P> -<B>char *pcre_version(void);</B> -</P> -<P> -<B>void *(*pcre_malloc)(size_t);</B> -</P> -<P> -<B>void (*pcre_free)(void *);</B> -</P> -<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A> -<P> -The PCRE library is a set of functions that implement regular expression -pattern matching using the same syntax and semantics as Perl 5, with just a few -differences (see below). The current implementation corresponds to Perl 5.005, -with some additional features from later versions. This includes some -experimental, incomplete support for UTF-8 encoded strings. Details of exactly -what is and what is not supported are given below. -</P> -<P> -PCRE has its own native API, which is described in this document. There is also -a set of wrapper functions that correspond to the POSIX regular expression API. -These are described in the <B>pcreposix</B> documentation. -</P> -<P> -The native API function prototypes are defined in the header file <B>pcre.h</B>, -and on Unix systems the library itself is called <B>libpcre.a</B>, so can be -accessed by adding <B>-lpcre</B> to the command for linking an application which -calls it. The header file defines the macros PCRE_MAJOR and PCRE_MINOR to -contain the major and minor release numbers for the library. Applications can -use these to include support for different releases. -</P> -<P> -The functions <B>pcre_compile()</B>, <B>pcre_study()</B>, and <B>pcre_exec()</B> -are used for compiling and matching regular expressions. -</P> -<P> -The functions <B>pcre_copy_substring()</B>, <B>pcre_get_substring()</B>, and -<B>pcre_get_substring_list()</B> are convenience functions for extracting -captured substrings from a matched subject string; <B>pcre_free_substring()</B> -and <B>pcre_free_substring_list()</B> are also provided, to free the memory used -for extracted strings. -</P> -<P> -The function <B>pcre_maketables()</B> is used (optionally) to build a set of -character tables in the current locale for passing to <B>pcre_compile()</B>. -</P> -<P> -The function <B>pcre_fullinfo()</B> is used to find out information about a -compiled pattern; <B>pcre_info()</B> is an obsolete version which returns only -some of the available information, but is retained for backwards compatibility. -The function <B>pcre_version()</B> returns a pointer to a string containing the -version of PCRE and its date of release. -</P> -<P> -The global variables <B>pcre_malloc</B> and <B>pcre_free</B> initially contain -the entry points of the standard <B>malloc()</B> and <B>free()</B> functions -respectively. PCRE calls the memory management functions via these variables, -so a calling program can replace them if it wishes to intercept the calls. This -should be done before calling any PCRE functions. -</P> -<LI><A NAME="SEC4" HREF="#TOC1">MULTI-THREADING</A> -<P> -The PCRE functions can be used in multi-threading applications, with the -proviso that the memory management functions pointed to by <B>pcre_malloc</B> -and <B>pcre_free</B> are shared by all threads. -</P> -<P> -The compiled form of a regular expression is not altered during matching, so -the same compiled pattern can safely be used by several threads at once. -</P> -<LI><A NAME="SEC5" HREF="#TOC1">COMPILING A PATTERN</A> -<P> -The function <B>pcre_compile()</B> is called to compile a pattern into an -internal form. The pattern is a C string terminated by a binary zero, and -is passed in the argument <I>pattern</I>. A pointer to a single block of memory -that is obtained via <B>pcre_malloc</B> is returned. This contains the -compiled code and related data. The <B>pcre</B> type is defined for this for -convenience, but in fact <B>pcre</B> is just a typedef for <B>void</B>, since the -contents of the block are not externally defined. It is up to the caller to -free the memory when it is no longer required. -</P> -<P> -The size of a compiled pattern is roughly proportional to the length of the -pattern string, except that each character class (other than those containing -just a single character, negated or not) requires 33 bytes, and repeat -quantifiers with a minimum greater than one or a bounded maximum cause the -relevant portions of the compiled pattern to be replicated. -</P> -<P> -The <I>options</I> argument contains independent bits that affect the -compilation. It should be zero if no options are required. Some of the options, -in particular, those that are compatible with Perl, can also be set and unset -from within the pattern (see the detailed description of regular expressions -below). For these options, the contents of the <I>options</I> argument specifies -their initial settings at the start of compilation and execution. The -PCRE_ANCHORED option can be set at the time of matching as well as at compile -time. -</P> -<P> -If <I>errptr</I> is NULL, <B>pcre_compile()</B> returns NULL immediately. -Otherwise, if compilation of a pattern fails, <B>pcre_compile()</B> returns -NULL, and sets the variable pointed to by <I>errptr</I> to point to a textual -error message. The offset from the start of the pattern to the character where -the error was discovered is placed in the variable pointed to by -<I>erroffset</I>, which must not be NULL. If it is, an immediate error is given. -</P> -<P> -If the final argument, <I>tableptr</I>, is NULL, PCRE uses a default set of -character tables which are built when it is compiled, using the default C -locale. Otherwise, <I>tableptr</I> must be the result of a call to -<B>pcre_maketables()</B>. See the section on locale support below. -</P> -<P> -The following option bits are defined in the header file: -</P> -<P> -<PRE> - PCRE_ANCHORED -</PRE> -</P> -<P> -If this bit is set, the pattern is forced to be "anchored", that is, it is -constrained to match only at the start of the string which is being searched -(the "subject string"). This effect can also be achieved by appropriate -constructs in the pattern itself, which is the only way to do it in Perl. -</P> -<P> -<PRE> - PCRE_CASELESS -</PRE> -</P> -<P> -If this bit is set, letters in the pattern match both upper and lower case -letters. It is equivalent to Perl's /i option. -</P> -<P> -<PRE> - PCRE_DOLLAR_ENDONLY -</PRE> -</P> -<P> -If this bit is set, a dollar metacharacter in the pattern matches only at the -end of the subject string. Without this option, a dollar also matches -immediately before the final character if it is a newline (but not before any -other newlines). The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is -set. There is no equivalent to this option in Perl. -</P> -<P> -<PRE> - PCRE_DOTALL -</PRE> -</P> -<P> -If this bit is set, a dot metacharater in the pattern matches all characters, -including newlines. Without it, newlines are excluded. This option is -equivalent to Perl's /s option. A negative class such as [^a] always matches a -newline character, independent of the setting of this option. -</P> -<P> -<PRE> - PCRE_EXTENDED -</PRE> -</P> -<P> -If this bit is set, whitespace data characters in the pattern are totally -ignored except when escaped or inside a character class, and characters between -an unescaped # outside a character class and the next newline character, -inclusive, are also ignored. This is equivalent to Perl's /x option, and makes -it possible to include comments inside complicated patterns. Note, however, -that this applies only to data characters. Whitespace characters may never -appear within special character sequences in a pattern, for example within the -sequence (?( which introduces a conditional subpattern. -</P> -<P> -<PRE> - PCRE_EXTRA -</PRE> -</P> -<P> -This option was invented in order to turn on additional functionality of PCRE -that is incompatible with Perl, but it is currently of very little use. When -set, any backslash in a pattern that is followed by a letter that has no -special meaning causes an error, thus reserving these combinations for future -expansion. By default, as in Perl, a backslash followed by a letter with no -special meaning is treated as a literal. There are at present no other features -controlled by this option. It can also be set by a (?X) option setting within a -pattern. -</P> -<P> -<PRE> - PCRE_MULTILINE -</PRE> -</P> -<P> -By default, PCRE treats the subject string as consisting of a single "line" of -characters (even if it actually contains several newlines). The "start of line" -metacharacter (^) matches only at the start of the string, while the "end of -line" metacharacter ($) matches only at the end of the string, or before a -terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as -Perl. -</P> -<P> -When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs -match immediately following or immediately before any newline in the subject -string, respectively, as well as at the very start and end. This is equivalent -to Perl's /m option. If there are no "\n" characters in a subject string, or -no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no -effect. -</P> -<P> -<PRE> - PCRE_UNGREEDY -</PRE> -</P> -<P> -This option inverts the "greediness" of the quantifiers so that they are not -greedy by default, but become greedy if followed by "?". It is not compatible -with Perl. It can also be set by a (?U) option setting within the pattern. -</P> -<P> -<PRE> - PCRE_UTF8 -</PRE> -</P> -<P> -This option causes PCRE to regard both the pattern and the subject as strings -of UTF-8 characters instead of just byte strings. However, it is available only -if PCRE has been built to include UTF-8 support. If not, the use of this option -provokes an error. Support for UTF-8 is new, experimental, and incomplete. -Details of exactly what it entails are given below. -</P> -<LI><A NAME="SEC6" HREF="#TOC1">STUDYING A PATTERN</A> -<P> -When a pattern is going to be used several times, it is worth spending more -time analyzing it in order to speed up the time taken for matching. The -function <B>pcre_study()</B> takes a pointer to a compiled pattern as its first -argument, and returns a pointer to a <B>pcre_extra</B> block (another <B>void</B> -typedef) containing additional information about the pattern; this can be -passed to <B>pcre_exec()</B>. If no additional information is available, NULL -is returned. -</P> -<P> -The second argument contains option bits. At present, no options are defined -for <B>pcre_study()</B>, and this argument should always be zero. -</P> -<P> -The third argument for <B>pcre_study()</B> is a pointer to an error message. If -studying succeeds (even if no data is returned), the variable it points to is -set to NULL. Otherwise it points to a textual error message. -</P> -<P> -At present, studying a pattern is useful only for non-anchored patterns that do -not have a single fixed starting character. A bitmap of possible starting -characters is created. -</P> -<LI><A NAME="SEC7" HREF="#TOC1">LOCALE SUPPORT</A> -<P> -PCRE handles caseless matching, and determines whether characters are letters, -digits, or whatever, by reference to a set of tables. The library contains a -default set of tables which is created in the default C locale when PCRE is -compiled. This is used when the final argument of <B>pcre_compile()</B> is NULL, -and is sufficient for many applications. -</P> -<P> -An alternative set of tables can, however, be supplied. Such tables are built -by calling the <B>pcre_maketables()</B> function, which has no arguments, in the -relevant locale. The result can then be passed to <B>pcre_compile()</B> as often -as necessary. For example, to build and use tables that are appropriate for the -French locale (where accented characters with codes greater than 128 are -treated as letters), the following code could be used: -</P> -<P> -<PRE> - setlocale(LC_CTYPE, "fr"); - tables = pcre_maketables(); - re = pcre_compile(..., tables); -</PRE> -</P> -<P> -The tables are built in memory that is obtained via <B>pcre_malloc</B>. The -pointer that is passed to <B>pcre_compile</B> is saved with the compiled -pattern, and the same tables are used via this pointer by <B>pcre_study()</B> -and <B>pcre_exec()</B>. Thus for any single pattern, compilation, studying and -matching all happen in the same locale, but different patterns can be compiled -in different locales. It is the caller's responsibility to ensure that the -memory containing the tables remains available for as long as it is needed. -</P> -<LI><A NAME="SEC8" HREF="#TOC1">INFORMATION ABOUT A PATTERN</A> -<P> -The <B>pcre_fullinfo()</B> function returns information about a compiled -pattern. It replaces the obsolete <B>pcre_info()</B> function, which is -nevertheless retained for backwards compability (and is documented below). -</P> -<P> -The first argument for <B>pcre_fullinfo()</B> is a pointer to the compiled -pattern. The second argument is the result of <B>pcre_study()</B>, or NULL if -the pattern was not studied. The third argument specifies which piece of -information is required, while the fourth argument is a pointer to a variable -to receive the data. The yield of the function is zero for success, or one of -the following negative numbers: -</P> -<P> -<PRE> - PCRE_ERROR_NULL the argument <I>code</I> was NULL - the argument <I>where</I> was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found - PCRE_ERROR_BADOPTION the value of <I>what</I> was invalid -</PRE> -</P> -<P> -The possible values for the third argument are defined in <B>pcre.h</B>, and are -as follows: -</P> -<P> -<PRE> - PCRE_INFO_OPTIONS -</PRE> -</P> -<P> -Return a copy of the options with which the pattern was compiled. The fourth -argument should point to au <B>unsigned long int</B> variable. These option bits -are those specified in the call to <B>pcre_compile()</B>, modified by any -top-level option settings within the pattern itself, and with the PCRE_ANCHORED -bit forcibly set if the form of the pattern implies that it can match only at -the start of a subject string. -</P> -<P> -<PRE> - PCRE_INFO_SIZE -</PRE> -</P> -<P> -Return the size of the compiled pattern, that is, the value that was passed as -the argument to <B>pcre_malloc()</B> when PCRE was getting memory in which to -place the compiled data. The fourth argument should point to a <B>size_t</B> -variable. -</P> -<P> -<PRE> - PCRE_INFO_CAPTURECOUNT -</PRE> -</P> -<P> -Return the number of capturing subpatterns in the pattern. The fourth argument -should point to an \fbint\fR variable. -</P> -<P> -<PRE> - PCRE_INFO_BACKREFMAX -</PRE> -</P> -<P> -Return the number of the highest back reference in the pattern. The fourth -argument should point to an <B>int</B> variable. Zero is returned if there are -no back references. -</P> -<P> -<PRE> - PCRE_INFO_FIRSTCHAR -</PRE> -</P> -<P> -Return information about the first character of any matched string, for a -non-anchored pattern. If there is a fixed first character, e.g. from a pattern -such as (cat|cow|coyote), it is returned in the integer pointed to by -<I>where</I>. Otherwise, if either -</P> -<P> -(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch -starts with "^", or -</P> -<P> -(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set -(if it were set, the pattern would be anchored), -</P> -<P> --1 is returned, indicating that the pattern matches only at the start of a -subject string or after any "\n" within the string. Otherwise -2 is returned. -For anchored patterns, -2 is returned. -</P> -<P> -<PRE> - PCRE_INFO_FIRSTTABLE -</PRE> -</P> -<P> -If the pattern was studied, and this resulted in the construction of a 256-bit -table indicating a fixed set of characters for the first character in any -matching string, a pointer to the table is returned. Otherwise NULL is -returned. The fourth argument should point to an <B>unsigned char *</B> -variable. -</P> -<P> -<PRE> - PCRE_INFO_LASTLITERAL -</PRE> -</P> -<P> -For a non-anchored pattern, return the value of the rightmost literal character -which must exist in any matched string, other than at its start. The fourth -argument should point to an <B>int</B> variable. If there is no such character, -or if the pattern is anchored, -1 is returned. For example, for the pattern -/a\d+z\d+/ the returned value is 'z'. -</P> -<P> -The <B>pcre_info()</B> function is now obsolete because its interface is too -restrictive to return all the available data about a compiled pattern. New -programs should use <B>pcre_fullinfo()</B> instead. The yield of -<B>pcre_info()</B> is the number of capturing subpatterns, or one of the -following negative numbers: -</P> -<P> -<PRE> - PCRE_ERROR_NULL the argument <I>code</I> was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found -</PRE> -</P> -<P> -If the <I>optptr</I> argument is not NULL, a copy of the options with which the -pattern was compiled is placed in the integer it points to (see -PCRE_INFO_OPTIONS above). -</P> -<P> -If the pattern is not anchored and the <I>firstcharptr</I> argument is not NULL, -it is used to pass back information about the first character of any matched -string (see PCRE_INFO_FIRSTCHAR above). -</P> -<LI><A NAME="SEC9" HREF="#TOC1">MATCHING A PATTERN</A> -<P> -The function <B>pcre_exec()</B> is called to match a subject string against a -pre-compiled pattern, which is passed in the <I>code</I> argument. If the -pattern has been studied, the result of the study should be passed in the -<I>extra</I> argument. Otherwise this must be NULL. -</P> -<P> -The PCRE_ANCHORED option can be passed in the <I>options</I> argument, whose -unused bits must be zero. However, if a pattern was compiled with -PCRE_ANCHORED, or turned out to be anchored by virtue of its contents, it -cannot be made unachored at matching time. -</P> -<P> -There are also three further options that can be set only at matching time: -</P> -<P> -<PRE> - PCRE_NOTBOL -</PRE> -</P> -<P> -The first character of the string is not the beginning of a line, so the -circumflex metacharacter should not match before it. Setting this without -PCRE_MULTILINE (at compile time) causes circumflex never to match. -</P> -<P> -<PRE> - PCRE_NOTEOL -</PRE> -</P> -<P> -The end of the string is not the end of a line, so the dollar metacharacter -should not match it nor (except in multiline mode) a newline immediately before -it. Setting this without PCRE_MULTILINE (at compile time) causes dollar never -to match. -</P> -<P> -<PRE> - PCRE_NOTEMPTY -</PRE> -</P> -<P> -An empty string is not considered to be a valid match if this option is set. If -there are alternatives in the pattern, they are tried. If all the alternatives -match the empty string, the entire match fails. For example, if the pattern -</P> -<P> -<PRE> - a?b? -</PRE> -</P> -<P> -is applied to a string not beginning with "a" or "b", it matches the empty -string at the start of the subject. With PCRE_NOTEMPTY set, this match is not -valid, so PCRE searches further into the string for occurrences of "a" or "b". -</P> -<P> -Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a special case -of a pattern match of the empty string within its <B>split()</B> function, and -when using the /g modifier. It is possible to emulate Perl's behaviour after -matching a null string by first trying the match again at the same offset with -PCRE_NOTEMPTY set, and then if that fails by advancing the starting offset (see -below) and trying an ordinary match again. -</P> -<P> -The subject string is passed as a pointer in <I>subject</I>, a length in -<I>length</I>, and a starting offset in <I>startoffset</I>. Unlike the pattern -string, it may contain binary zero characters. When the starting offset is -zero, the search for a match starts at the beginning of the subject, and this -is by far the most common case. -</P> -<P> -A non-zero starting offset is useful when searching for another match in the -same subject by calling <B>pcre_exec()</B> again after a previous success. -Setting <I>startoffset</I> differs from just passing over a shortened string and -setting PCRE_NOTBOL in the case of a pattern that begins with any kind of -lookbehind. For example, consider the pattern -</P> -<P> -<PRE> - \Biss\B -</PRE> -</P> -<P> -which finds occurrences of "iss" in the middle of words. (\B matches only if -the current position in the subject is not a word boundary.) When applied to -the string "Mississipi" the first call to <B>pcre_exec()</B> finds the first -occurrence. If <B>pcre_exec()</B> is called again with just the remainder of the -subject, namely "issipi", it does not match, because \B is always false at the -start of the subject, which is deemed to be a word boundary. However, if -<B>pcre_exec()</B> is passed the entire string again, but with <I>startoffset</I> -set to 4, it finds the second occurrence of "iss" because it is able to look -behind the starting point to discover that it is preceded by a letter. -</P> -<P> -If a non-zero starting offset is passed when the pattern is anchored, one -attempt to match at the given offset is tried. This can only succeed if the -pattern does not require the match to be at the start of the subject. -</P> -<P> -In general, a pattern matches a certain portion of the subject, and in -addition, further substrings from the subject may be picked out by parts of the -pattern. Following the usage in Jeffrey Friedl's book, this is called -"capturing" in what follows, and the phrase "capturing subpattern" is used for -a fragment of a pattern that picks out a substring. PCRE supports several other -kinds of parenthesized subpattern that do not cause substrings to be captured. -</P> -<P> -Captured substrings are returned to the caller via a vector of integer offsets -whose address is passed in <I>ovector</I>. The number of elements in the vector -is passed in <I>ovecsize</I>. The first two-thirds of the vector is used to pass -back captured substrings, each substring using a pair of integers. The -remaining third of the vector is used as workspace by <B>pcre_exec()</B> while -matching capturing subpatterns, and is not available for passing back -information. The length passed in <I>ovecsize</I> should always be a multiple of -three. If it is not, it is rounded down. -</P> -<P> -When a match has been successful, information about captured substrings is -returned in pairs of integers, starting at the beginning of <I>ovector</I>, and -continuing up to two-thirds of its length at the most. The first element of a -pair is set to the offset of the first character in a substring, and the second -is set to the offset of the first character after the end of a substring. The -first pair, <I>ovector[0]</I> and <I>ovector[1]</I>, identify the portion of the -subject string matched by the entire pattern. The next pair is used for the -first capturing subpattern, and so on. The value returned by <B>pcre_exec()</B> -is the number of pairs that have been set. If there are no capturing -subpatterns, the return value from a successful match is 1, indicating that -just the first pair of offsets has been set. -</P> -<P> -Some convenience functions are provided for extracting the captured substrings -as separate strings. These are described in the following section. -</P> -<P> -It is possible for an capturing subpattern number <I>n+1</I> to match some -part of the subject when subpattern <I>n</I> has not been used at all. For -example, if the string "abc" is matched against the pattern (a|(z))(bc) -subpatterns 1 and 3 are matched, but 2 is not. When this happens, both offset -values corresponding to the unused subpattern are set to -1. -</P> -<P> -If a capturing subpattern is matched repeatedly, it is the last portion of the -string that it matched that gets returned. -</P> -<P> -If the vector is too small to hold all the captured substrings, it is used as -far as possible (up to two-thirds of its length), and the function returns a -value of zero. In particular, if the substring offsets are not of interest, -<B>pcre_exec()</B> may be called with <I>ovector</I> passed as NULL and -<I>ovecsize</I> as zero. However, if the pattern contains back references and -the <I>ovector</I> isn't big enough to remember the related substrings, PCRE has -to get additional memory for use during matching. Thus it is usually advisable -to supply an <I>ovector</I>. -</P> -<P> -Note that <B>pcre_info()</B> can be used to find out how many capturing -subpatterns there are in a compiled pattern. The smallest size for -<I>ovector</I> that will allow for <I>n</I> captured substrings in addition to -the offsets of the substring matched by the whole pattern is (<I>n</I>+1)*3. -</P> -<P> -If <B>pcre_exec()</B> fails, it returns a negative number. The following are -defined in the header file: -</P> -<P> -<PRE> - PCRE_ERROR_NOMATCH (-1) -</PRE> -</P> -<P> -The subject string did not match the pattern. -</P> -<P> -<PRE> - PCRE_ERROR_NULL (-2) -</PRE> -</P> -<P> -Either <I>code</I> or <I>subject</I> was passed as NULL, or <I>ovector</I> was -NULL and <I>ovecsize</I> was not zero. -</P> -<P> -<PRE> - PCRE_ERROR_BADOPTION (-3) -</PRE> -</P> -<P> -An unrecognized bit was set in the <I>options</I> argument. -</P> -<P> -<PRE> - PCRE_ERROR_BADMAGIC (-4) -</PRE> -</P> -<P> -PCRE stores a 4-byte "magic number" at the start of the compiled code, to catch -the case when it is passed a junk pointer. This is the error it gives when the -magic number isn't present. -</P> -<P> -<PRE> - PCRE_ERROR_UNKNOWN_NODE (-5) -</PRE> -</P> -<P> -While running the pattern match, an unknown item was encountered in the -compiled pattern. This error could be caused by a bug in PCRE or by overwriting -of the compiled pattern. -</P> -<P> -<PRE> - PCRE_ERROR_NOMEMORY (-6) -</PRE> -</P> -<P> -If a pattern contains back references, but the <I>ovector</I> that is passed to -<B>pcre_exec()</B> is not big enough to remember the referenced substrings, PCRE -gets a block of memory at the start of matching to use for this purpose. If the -call via <B>pcre_malloc()</B> fails, this error is given. The memory is freed at -the end of matching. -</P> -<LI><A NAME="SEC10" HREF="#TOC1">EXTRACTING CAPTURED SUBSTRINGS</A> -<P> -Captured substrings can be accessed directly by using the offsets returned by -<B>pcre_exec()</B> in <I>ovector</I>. For convenience, the functions -<B>pcre_copy_substring()</B>, <B>pcre_get_substring()</B>, and -<B>pcre_get_substring_list()</B> are provided for extracting captured substrings -as new, separate, zero-terminated strings. A substring that contains a binary -zero is correctly extracted and has a further zero added on the end, but the -result does not, of course, function as a C string. -</P> -<P> -The first three arguments are the same for all three functions: <I>subject</I> -is the subject string which has just been successfully matched, <I>ovector</I> -is a pointer to the vector of integer offsets that was passed to -<B>pcre_exec()</B>, and <I>stringcount</I> is the number of substrings that -were captured by the match, including the substring that matched the entire -regular expression. This is the value returned by <B>pcre_exec</B> if it -is greater than zero. If <B>pcre_exec()</B> returned zero, indicating that it -ran out of space in <I>ovector</I>, the value passed as <I>stringcount</I> should -be the size of the vector divided by three. -</P> -<P> -The functions <B>pcre_copy_substring()</B> and <B>pcre_get_substring()</B> -extract a single substring, whose number is given as <I>stringnumber</I>. A -value of zero extracts the substring that matched the entire pattern, while -higher values extract the captured substrings. For <B>pcre_copy_substring()</B>, -the string is placed in <I>buffer</I>, whose length is given by -<I>buffersize</I>, while for <B>pcre_get_substring()</B> a new block of memory is -obtained via <B>pcre_malloc</B>, and its address is returned via -<I>stringptr</I>. The yield of the function is the length of the string, not -including the terminating zero, or one of -</P> -<P> -<PRE> - PCRE_ERROR_NOMEMORY (-6) -</PRE> -</P> -<P> -The buffer was too small for <B>pcre_copy_substring()</B>, or the attempt to get -memory failed for <B>pcre_get_substring()</B>. -</P> -<P> -<PRE> - PCRE_ERROR_NOSUBSTRING (-7) -</PRE> -</P> -<P> -There is no substring whose number is <I>stringnumber</I>. -</P> -<P> -The <B>pcre_get_substring_list()</B> function extracts all available substrings -and builds a list of pointers to them. All this is done in a single block of -memory which is obtained via <B>pcre_malloc</B>. The address of the memory block -is returned via <I>listptr</I>, which is also the start of the list of string -pointers. The end of the list is marked by a NULL pointer. The yield of the -function is zero if all went well, or -</P> -<P> -<PRE> - PCRE_ERROR_NOMEMORY (-6) -</PRE> -</P> -<P> -if the attempt to get the memory block failed. -</P> -<P> -When any of these functions encounter a substring that is unset, which can -happen when capturing subpattern number <I>n+1</I> matches some part of the -subject, but subpattern <I>n</I> has not been used at all, they return an empty -string. This can be distinguished from a genuine zero-length substring by -inspecting the appropriate offset in <I>ovector</I>, which is negative for unset -substrings. -</P> -<P> -The two convenience functions <B>pcre_free_substring()</B> and -<B>pcre_free_substring_list()</B> can be used to free the memory returned by -a previous call of <B>pcre_get_substring()</B> or -<B>pcre_get_substring_list()</B>, respectively. They do nothing more than call -the function pointed to by <B>pcre_free</B>, which of course could be called -directly from a C program. However, PCRE is used in some situations where it is -linked via a special interface to another programming language which cannot use -<B>pcre_free</B> directly; it is for these cases that the functions are -provided. -</P> -<LI><A NAME="SEC11" HREF="#TOC1">LIMITATIONS</A> -<P> -There are some size limitations in PCRE but it is hoped that they will never in -practice be relevant. -The maximum length of a compiled pattern is 65539 (sic) bytes. -All values in repeating quantifiers must be less than 65536. -The maximum number of capturing subpatterns is 99. -The maximum number of all parenthesized subpatterns, including capturing -subpatterns, assertions, and other types of subpattern, is 200. -</P> -<P> -The maximum length of a subject string is the largest positive number that an -integer variable can hold. However, PCRE uses recursion to handle subpatterns -and indefinite repetition. This means that the available stack space may limit -the size of a subject string that can be processed by certain patterns. -</P> -<LI><A NAME="SEC12" HREF="#TOC1">DIFFERENCES FROM PERL</A> -<P> -The differences described here are with respect to Perl 5.005. -</P> -<P> -1. By default, a whitespace character is any character that the C library -function <B>isspace()</B> recognizes, though it is possible to compile PCRE with -alternative character type tables. Normally <B>isspace()</B> matches space, -formfeed, newline, carriage return, horizontal tab, and vertical tab. Perl 5 -no longer includes vertical tab in its set of whitespace characters. The \v -escape that was in the Perl documentation for a long time was never in fact -recognized. However, the character itself was treated as whitespace at least -up to 5.002. In 5.004 and 5.005 it does not match \s. -</P> -<P> -2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl permits -them, but they do not mean what you might think. For example, (?!a){3} does -not assert that the next three characters are not "a". It just asserts that the -next character is not "a" three times. -</P> -<P> -3. Capturing subpatterns that occur inside negative lookahead assertions are -counted, but their entries in the offsets vector are never set. Perl sets its -numerical variables from any such patterns that are matched before the -assertion fails to match something (thereby succeeding), but only if the -negative lookahead assertion contains just one branch. -</P> -<P> -4. Though binary zero characters are supported in the subject string, they are -not allowed in a pattern string because it is passed as a normal C string, -terminated by zero. The escape sequence "\0" can be used in the pattern to -represent a binary zero. -</P> -<P> -5. The following Perl escape sequences are not supported: \l, \u, \L, \U, -\E, \Q. In fact these are implemented by Perl's general string-handling and -are not part of its pattern matching engine. -</P> -<P> -6. The Perl \G assertion is not supported as it is not relevant to single -pattern matches. -</P> -<P> -7. Fairly obviously, PCRE does not support the (?{code}) and (?p{code}) -constructions. However, there is some experimental support for recursive -patterns using the non-Perl item (?R). -</P> -<P> -8. There are at the time of writing some oddities in Perl 5.005_02 concerned -with the settings of captured strings when part of a pattern is repeated. For -example, matching "aba" against the pattern /^(a(b)?)+$/ sets $2 to the value -"b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves $2 unset. However, if -the pattern is changed to /^(aa(b(b))?)+$/ then $2 (and $3) are set. -</P> -<P> -In Perl 5.004 $2 is set in both cases, and that is also true of PCRE. If in the -future Perl changes to a consistent state that is different, PCRE may change to -follow. -</P> -<P> -9. Another as yet unresolved discrepancy is that in Perl 5.005_02 the pattern -/^(a)?(?(1)a|b)+$/ matches the string "a", whereas in PCRE it does not. -However, in both Perl and PCRE /^(a)?a/ matched against "a" leaves $1 unset. -</P> -<P> -10. PCRE provides some extensions to the Perl regular expression facilities: -</P> -<P> -(a) Although lookbehind assertions must match fixed length strings, each -alternative branch of a lookbehind assertion can match a different length of -string. Perl 5.005 requires them all to have the same length. -</P> -<P> -(b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ meta- -character matches only at the very end of the string. -</P> -<P> -(c) If PCRE_EXTRA is set, a backslash followed by a letter with no special -meaning is faulted. -</P> -<P> -(d) If PCRE_UNGREEDY is set, the greediness of the repetition quantifiers is -inverted, that is, by default they are not greedy, but if followed by a -question mark they are. -</P> -<P> -(e) PCRE_ANCHORED can be used to force a pattern to be tried only at the start -of the subject. -</P> -<P> -(f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options for -<B>pcre_exec()</B> have no Perl equivalents. -</P> -<P> -(g) The (?R) construct allows for recursive pattern matching (Perl 5.6 can do -this using the (?p{code}) construct, which PCRE cannot of course support.) -</P> -<LI><A NAME="SEC13" HREF="#TOC1">REGULAR EXPRESSION DETAILS</A> -<P> -The syntax and semantics of the regular expressions supported by PCRE are -described below. Regular expressions are also described in the Perl -documentation and in a number of other books, some of which have copious -examples. Jeffrey Friedl's "Mastering Regular Expressions", published by -O'Reilly (ISBN 1-56592-257), covers them in great detail. -</P> -<P> -The description here is intended as reference documentation. The basic -operation of PCRE is on strings of bytes. However, there is the beginnings of -some support for UTF-8 character strings. To use this support you must -configure PCRE to include it, and then call <B>pcre_compile()</B> with the -PCRE_UTF8 option. How this affects the pattern matching is described in the -final section of this document. -</P> -<P> -A regular expression is a pattern that is matched against a subject string from -left to right. Most characters stand for themselves in a pattern, and match the -corresponding characters in the subject. As a trivial example, the pattern -</P> -<P> -<PRE> - The quick brown fox -</PRE> -</P> -<P> -matches a portion of a subject string that is identical to itself. The power of -regular expressions comes from the ability to include alternatives and -repetitions in the pattern. These are encoded in the pattern by the use of -<I>meta-characters</I>, which do not stand for themselves but instead are -interpreted in some special way. -</P> -<P> -There are two different sets of meta-characters: those that are recognized -anywhere in the pattern except within square brackets, and those that are -recognized in square brackets. Outside square brackets, the meta-characters are -as follows: -</P> -<P> -<PRE> - \ general escape character with several uses - ^ assert start of subject (or line, in multiline mode) - $ assert end of subject (or line, in multiline mode) - . match any character except newline (by default) - [ start character class definition - | start of alternative branch - ( start subpattern - ) end subpattern - ? extends the meaning of ( - also 0 or 1 quantifier - also quantifier minimizer - * 0 or more quantifier - + 1 or more quantifier - { start min/max quantifier -</PRE> -</P> -<P> -Part of a pattern that is in square brackets is called a "character class". In -a character class the only meta-characters are: -</P> -<P> -<PRE> - \ general escape character - ^ negate the class, but only if the first character - - indicates character range - ] terminates the character class -</PRE> -</P> -<P> -The following sections describe the use of each of the meta-characters. -</P> -<LI><A NAME="SEC14" HREF="#TOC1">BACKSLASH</A> -<P> -The backslash character has several uses. Firstly, if it is followed by a -non-alphameric character, it takes away any special meaning that character may -have. This use of backslash as an escape character applies both inside and -outside character classes. -</P> -<P> -For example, if you want to match a "*" character, you write "\*" in the -pattern. This applies whether or not the following character would otherwise be -interpreted as a meta-character, so it is always safe to precede a -non-alphameric with "\" to specify that it stands for itself. In particular, -if you want to match a backslash, you write "\\". -</P> -<P> -If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the -pattern (other than in a character class) and characters between a "#" outside -a character class and the next newline character are ignored. An escaping -backslash can be used to include a whitespace or "#" character as part of the -pattern. -</P> -<P> -A second use of backslash provides a way of encoding non-printing characters -in patterns in a visible manner. There is no restriction on the appearance of -non-printing characters, apart from the binary zero that terminates a pattern, -but when a pattern is being prepared by text editing, it is usually easier to -use one of the following escape sequences than the binary character it -represents: -</P> -<P> -<PRE> - \a alarm, that is, the BEL character (hex 07) - \cx "control-x", where x is any character - \e escape (hex 1B) - \f formfeed (hex 0C) - \n newline (hex 0A) - \r carriage return (hex 0D) - \t tab (hex 09) - \xhh character with hex code hh - \ddd character with octal code ddd, or backreference -</PRE> -</P> -<P> -The precise effect of "\cx" is as follows: if "x" is a lower case letter, it -is converted to upper case. Then bit 6 of the character (hex 40) is inverted. -Thus "\cz" becomes hex 1A, but "\c{" becomes hex 3B, while "\c;" becomes hex -7B. -</P> -<P> -After "\x", up to two hexadecimal digits are read (letters can be in upper or -lower case). -</P> -<P> -After "\0" up to two further octal digits are read. In both cases, if there -are fewer than two digits, just those that are present are used. Thus the -sequence "\0\x\07" specifies two binary zeros followed by a BEL character. -Make sure you supply two digits after the initial zero if the character that -follows is itself an octal digit. -</P> -<P> -The handling of a backslash followed by a digit other than 0 is complicated. -Outside a character class, PCRE reads it and any following digits as a decimal -number. If the number is less than 10, or if there have been at least that many -previous capturing left parentheses in the expression, the entire sequence is -taken as a <I>back reference</I>. A description of how this works is given -later, following the discussion of parenthesized subpatterns. -</P> -<P> -Inside a character class, or if the decimal number is greater than 9 and there -have not been that many capturing subpatterns, PCRE re-reads up to three octal -digits following the backslash, and generates a single byte from the least -significant 8 bits of the value. Any subsequent digits stand for themselves. -For example: -</P> -<P> -<PRE> - \040 is another way of writing a space - \40 is the same, provided there are fewer than 40 - previous capturing subpatterns - \7 is always a back reference - \11 might be a back reference, or another way of - writing a tab - \011 is always a tab - \0113 is a tab followed by the character "3" - \113 is the character with octal code 113 (since there - can be no more than 99 back references) - \377 is a byte consisting entirely of 1 bits - \81 is either a back reference, or a binary zero - followed by the two characters "8" and "1" -</PRE> -</P> -<P> -Note that octal values of 100 or greater must not be introduced by a leading -zero, because no more than three octal digits are ever read. -</P> -<P> -All the sequences that define a single byte value can be used both inside and -outside character classes. In addition, inside a character class, the sequence -"\b" is interpreted as the backspace character (hex 08). Outside a character -class it has a different meaning (see below). -</P> -<P> -The third use of backslash is for specifying generic character types: -</P> -<P> -<PRE> - \d any decimal digit - \D any character that is not a decimal digit - \s any whitespace character - \S any character that is not a whitespace character - \w any "word" character - \W any "non-word" character -</PRE> -</P> -<P> -Each pair of escape sequences partitions the complete set of characters into -two disjoint sets. Any given character matches one, and only one, of each pair. -</P> -<P> -A "word" character is any letter or digit or the underscore character, that is, -any character which can be part of a Perl "word". The definition of letters and -digits is controlled by PCRE's character tables, and may vary if locale- -specific matching is taking place (see "Locale support" above). For example, in -the "fr" (French) locale, some character codes greater than 128 are used for -accented letters, and these are matched by \w. -</P> -<P> -These character type sequences can appear both inside and outside character -classes. They each match one character of the appropriate type. If the current -matching point is at the end of the subject string, all of them fail, since -there is no character to match. -</P> -<P> -The fourth use of backslash is for certain simple assertions. An assertion -specifies a condition that has to be met at a particular point in a match, -without consuming any characters from the subject string. The use of -subpatterns for more complicated assertions is described below. The backslashed -assertions are -</P> -<P> -<PRE> - \b word boundary - \B not a word boundary - \A start of subject (independent of multiline mode) - \Z end of subject or newline at end (independent of multiline mode) - \z end of subject (independent of multiline mode) -</PRE> -</P> -<P> -These assertions may not appear in character classes (but note that "\b" has a -different meaning, namely the backspace character, inside a character class). -</P> -<P> -A word boundary is a position in the subject string where the current character -and the previous character do not both match \w or \W (i.e. one matches -\w and the other matches \W), or the start or end of the string if the -first or last character matches \w, respectively. -</P> -<P> -The \A, \Z, and \z assertions differ from the traditional circumflex and -dollar (described below) in that they only ever match at the very start and end -of the subject string, whatever options are set. They are not affected by the -PCRE_NOTBOL or PCRE_NOTEOL options. If the <I>startoffset</I> argument of -<B>pcre_exec()</B> is non-zero, \A can never match. The difference between \Z -and \z is that \Z matches before a newline that is the last character of the -string as well as at the end of the string, whereas \z matches only at the -end. -</P> -<LI><A NAME="SEC15" HREF="#TOC1">CIRCUMFLEX AND DOLLAR</A> -<P> -Outside a character class, in the default matching mode, the circumflex -character is an assertion which is true only if the current matching point is -at the start of the subject string. If the <I>startoffset</I> argument of -<B>pcre_exec()</B> is non-zero, circumflex can never match. Inside a character -class, circumflex has an entirely different meaning (see below). -</P> -<P> -Circumflex need not be the first character of the pattern if a number of -alternatives are involved, but it should be the first thing in each alternative -in which it appears if the pattern is ever to match that branch. If all -possible alternatives start with a circumflex, that is, if the pattern is -constrained to match only at the start of the subject, it is said to be an -"anchored" pattern. (There are also other constructs that can cause a pattern -to be anchored.) -</P> -<P> -A dollar character is an assertion which is true only if the current matching -point is at the end of the subject string, or immediately before a newline -character that is the last character in the string (by default). Dollar need -not be the last character of the pattern if a number of alternatives are -involved, but it should be the last item in any branch in which it appears. -Dollar has no special meaning in a character class. -</P> -<P> -The meaning of dollar can be changed so that it matches only at the very end of -the string, by setting the PCRE_DOLLAR_ENDONLY option at compile or matching -time. This does not affect the \Z assertion. -</P> -<P> -The meanings of the circumflex and dollar characters are changed if the -PCRE_MULTILINE option is set. When this is the case, they match immediately -after and immediately before an internal "\n" character, respectively, in -addition to matching at the start and end of the subject string. For example, -the pattern /^abc$/ matches the subject string "def\nabc" in multiline mode, -but not otherwise. Consequently, patterns that are anchored in single line mode -because all branches start with "^" are not anchored in multiline mode, and a -match for circumflex is possible when the <I>startoffset</I> argument of -<B>pcre_exec()</B> is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if -PCRE_MULTILINE is set. -</P> -<P> -Note that the sequences \A, \Z, and \z can be used to match the start and -end of the subject in both modes, and if all branches of a pattern start with -\A is it always anchored, whether PCRE_MULTILINE is set or not. -</P> -<LI><A NAME="SEC16" HREF="#TOC1">FULL STOP (PERIOD, DOT)</A> -<P> -Outside a character class, a dot in the pattern matches any one character in -the subject, including a non-printing character, but not (by default) newline. -If the PCRE_DOTALL option is set, dots match newlines as well. The handling of -dot is entirely independent of the handling of circumflex and dollar, the only -relationship being that they both involve newline characters. Dot has no -special meaning in a character class. -</P> -<LI><A NAME="SEC17" HREF="#TOC1">SQUARE BRACKETS</A> -<P> -An opening square bracket introduces a character class, terminated by a closing -square bracket. A closing square bracket on its own is not special. If a -closing square bracket is required as a member of the class, it should be the -first data character in the class (after an initial circumflex, if present) or -escaped with a backslash. -</P> -<P> -A character class matches a single character in the subject; the character must -be in the set of characters defined by the class, unless the first character in -the class is a circumflex, in which case the subject character must not be in -the set defined by the class. If a circumflex is actually required as a member -of the class, ensure it is not the first character, or escape it with a -backslash. -</P> -<P> -For example, the character class [aeiou] matches any lower case vowel, while -[^aeiou] matches any character that is not a lower case vowel. Note that a -circumflex is just a convenient notation for specifying the characters which -are in the class by enumerating those that are not. It is not an assertion: it -still consumes a character from the subject string, and fails if the current -pointer is at the end of the string. -</P> -<P> -When caseless matching is set, any letters in a class represent both their -upper case and lower case versions, so for example, a caseless [aeiou] matches -"A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a -caseful version would. -</P> -<P> -The newline character is never treated in any special way in character classes, -whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class -such as [^a] will always match a newline. -</P> -<P> -The minus (hyphen) character can be used to specify a range of characters in a -character class. For example, [d-m] matches any letter between d and m, -inclusive. If a minus character is required in a class, it must be escaped with -a backslash or appear in a position where it cannot be interpreted as -indicating a range, typically as the first or last character in the class. -</P> -<P> -It is not possible to have the literal character "]" as the end character of a -range. A pattern such as [W-]46] is interpreted as a class of two characters -("W" and "-") followed by a literal string "46]", so it would match "W46]" or -"-46]". However, if the "]" is escaped with a backslash it is interpreted as -the end of range, so [W-\]46] is interpreted as a single class containing a -range followed by two separate characters. The octal or hexadecimal -representation of "]" can also be used to end a range. -</P> -<P> -Ranges operate in ASCII collating sequence. They can also be used for -characters specified numerically, for example [\000-\037]. If a range that -includes letters is used when caseless matching is set, it matches the letters -in either case. For example, [W-c] is equivalent to [][\^_`wxyzabc], matched -caselessly, and if character tables for the "fr" locale are in use, -[\xc8-\xcb] matches accented E characters in both cases. -</P> -<P> -The character types \d, \D, \s, \S, \w, and \W may also appear in a -character class, and add the characters that they match to the class. For -example, [\dABCDEF] matches any hexadecimal digit. A circumflex can -conveniently be used with the upper case character types to specify a more -restricted set of characters than the matching lower case type. For example, -the class [^\W_] matches any letter or digit, but not underscore. -</P> -<P> -All non-alphameric characters other than \, -, ^ (at the start) and the -terminating ] are non-special in character classes, but it does no harm if they -are escaped. -</P> -<LI><A NAME="SEC18" HREF="#TOC1">POSIX CHARACTER CLASSES</A> -<P> -Perl 5.6 (not yet released at the time of writing) is going to support the -POSIX notation for character classes, which uses names enclosed by [: and :] -within the enclosing square brackets. PCRE supports this notation. For example, -</P> -<P> -<PRE> - [01[:alpha:]%] -</PRE> -</P> -<P> -matches "0", "1", any alphabetic character, or "%". The supported class names -are -</P> -<P> -<PRE> - alnum letters and digits - alpha letters - ascii character codes 0 - 127 - cntrl control characters - digit decimal digits (same as \d) - graph printing characters, excluding space - lower lower case letters - print printing characters, including space - punct printing characters, excluding letters and digits - space white space (same as \s) - upper upper case letters - word "word" characters (same as \w) - xdigit hexadecimal digits -</PRE> -</P> -<P> -The names "ascii" and "word" are Perl extensions. Another Perl extension is -negation, which is indicated by a ^ character after the colon. For example, -</P> -<P> -<PRE> - [12[:^digit:]] -</PRE> -</P> -<P> -matches "1", "2", or any non-digit. PCRE (and Perl) also recogize the POSIX -syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not -supported, and an error is given if they are encountered. -</P> -<LI><A NAME="SEC19" HREF="#TOC1">VERTICAL BAR</A> -<P> -Vertical bar characters are used to separate alternative patterns. For example, -the pattern -</P> -<P> -<PRE> - gilbert|sullivan -</PRE> -</P> -<P> -matches either "gilbert" or "sullivan". Any number of alternatives may appear, -and an empty alternative is permitted (matching the empty string). -The matching process tries each alternative in turn, from left to right, -and the first one that succeeds is used. If the alternatives are within a -subpattern (defined below), "succeeds" means matching the rest of the main -pattern as well as the alternative in the subpattern. -</P> -<LI><A NAME="SEC20" HREF="#TOC1">INTERNAL OPTION SETTING</A> -<P> -The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED -can be changed from within the pattern by a sequence of Perl option letters -enclosed between "(?" and ")". The option letters are -</P> -<P> -<PRE> - i for PCRE_CASELESS - m for PCRE_MULTILINE - s for PCRE_DOTALL - x for PCRE_EXTENDED -</PRE> -</P> -<P> -For example, (?im) sets caseless, multiline matching. It is also possible to -unset these options by preceding the letter with a hyphen, and a combined -setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and -PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also -permitted. If a letter appears both before and after the hyphen, the option is -unset. -</P> -<P> -The scope of these option changes depends on where in the pattern the setting -occurs. For settings that are outside any subpattern (defined below), the -effect is the same as if the options were set or unset at the start of -matching. The following patterns all behave in exactly the same way: -</P> -<P> -<PRE> - (?i)abc - a(?i)bc - ab(?i)c - abc(?i) -</PRE> -</P> -<P> -which in turn is the same as compiling the pattern abc with PCRE_CASELESS set. -In other words, such "top level" settings apply to the whole pattern (unless -there are other changes inside subpatterns). If there is more than one setting -of the same option at top level, the rightmost setting is used. -</P> -<P> -If an option change occurs inside a subpattern, the effect is different. This -is a change of behaviour in Perl 5.005. An option change inside a subpattern -affects only that part of the subpattern that follows it, so -</P> -<P> -<PRE> - (a(?i)b)c -</PRE> -</P> -<P> -matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used). -By this means, options can be made to have different settings in different -parts of the pattern. Any changes made in one alternative do carry on -into subsequent branches within the same subpattern. For example, -</P> -<P> -<PRE> - (a(?i)b|c) -</PRE> -</P> -<P> -matches "ab", "aB", "c", and "C", even though when matching "C" the first -branch is abandoned before the option setting. This is because the effects of -option settings happen at compile time. There would be some very weird -behaviour otherwise. -</P> -<P> -The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the -same way as the Perl-compatible options by using the characters U and X -respectively. The (?X) flag setting is special in that it must always occur -earlier in the pattern than any of the additional features it turns on, even -when it is at top level. It is best put at the start. -</P> -<LI><A NAME="SEC21" HREF="#TOC1">SUBPATTERNS</A> -<P> -Subpatterns are delimited by parentheses (round brackets), which can be nested. -Marking part of a pattern as a subpattern does two things: -</P> -<P> -1. It localizes a set of alternatives. For example, the pattern -</P> -<P> -<PRE> - cat(aract|erpillar|) -</PRE> -</P> -<P> -matches one of the words "cat", "cataract", or "caterpillar". Without the -parentheses, it would match "cataract", "erpillar" or the empty string. -</P> -<P> -2. It sets up the subpattern as a capturing subpattern (as defined above). -When the whole pattern matches, that portion of the subject string that matched -the subpattern is passed back to the caller via the <I>ovector</I> argument of -<B>pcre_exec()</B>. Opening parentheses are counted from left to right (starting -from 1) to obtain the numbers of the capturing subpatterns. -</P> -<P> -For example, if the string "the red king" is matched against the pattern -</P> -<P> -<PRE> - the ((red|white) (king|queen)) -</PRE> -</P> -<P> -the captured substrings are "red king", "red", and "king", and are numbered 1, -2, and 3. -</P> -<P> -The fact that plain parentheses fulfil two functions is not always helpful. -There are often times when a grouping subpattern is required without a -capturing requirement. If an opening parenthesis is followed by "?:", the -subpattern does not do any capturing, and is not counted when computing the -number of any subsequent capturing subpatterns. For example, if the string "the -white queen" is matched against the pattern -</P> -<P> -<PRE> - the ((?:red|white) (king|queen)) -</PRE> -</P> -<P> -the captured substrings are "white queen" and "queen", and are numbered 1 and -2. The maximum number of captured substrings is 99, and the maximum number of -all subpatterns, both capturing and non-capturing, is 200. -</P> -<P> -As a convenient shorthand, if any option settings are required at the start of -a non-capturing subpattern, the option letters may appear between the "?" and -the ":". Thus the two patterns -</P> -<P> -<PRE> - (?i:saturday|sunday) - (?:(?i)saturday|sunday) -</PRE> -</P> -<P> -match exactly the same set of strings. Because alternative branches are tried -from left to right, and options are not reset until the end of the subpattern -is reached, an option setting in one branch does affect subsequent branches, so -the above patterns match "SUNDAY" as well as "Saturday". -</P> -<LI><A NAME="SEC22" HREF="#TOC1">REPETITION</A> -<P> -Repetition is specified by quantifiers, which can follow any of the following -items: -</P> -<P> -<PRE> - a single character, possibly escaped - the . metacharacter - a character class - a back reference (see next section) - a parenthesized subpattern (unless it is an assertion - see below) -</PRE> -</P> -<P> -The general repetition quantifier specifies a minimum and maximum number of -permitted matches, by giving the two numbers in curly brackets (braces), -separated by a comma. The numbers must be less than 65536, and the first must -be less than or equal to the second. For example: -</P> -<P> -<PRE> - z{2,4} -</PRE> -</P> -<P> -matches "zz", "zzz", or "zzzz". A closing brace on its own is not a special -character. If the second number is omitted, but the comma is present, there is -no upper limit; if the second number and the comma are both omitted, the -quantifier specifies an exact number of required matches. Thus -</P> -<P> -<PRE> - [aeiou]{3,} -</PRE> -</P> -<P> -matches at least 3 successive vowels, but may match many more, while -</P> -<P> -<PRE> - \d{8} -</PRE> -</P> -<P> -matches exactly 8 digits. An opening curly bracket that appears in a position -where a quantifier is not allowed, or one that does not match the syntax of a -quantifier, is taken as a literal character. For example, {,6} is not a -quantifier, but a literal string of four characters. -</P> -<P> -The quantifier {0} is permitted, causing the expression to behave as if the -previous item and the quantifier were not present. -</P> -<P> -For convenience (and historical compatibility) the three most common -quantifiers have single-character abbreviations: -</P> -<P> -<PRE> - * is equivalent to {0,} - + is equivalent to {1,} - ? is equivalent to {0,1} -</PRE> -</P> -<P> -It is possible to construct infinite loops by following a subpattern that can -match no characters with a quantifier that has no upper limit, for example: -</P> -<P> -<PRE> - (a?)* -</PRE> -</P> -<P> -Earlier versions of Perl and PCRE used to give an error at compile time for -such patterns. However, because there are cases where this can be useful, such -patterns are now accepted, but if any repetition of the subpattern does in fact -match no characters, the loop is forcibly broken. -</P> -<P> -By default, the quantifiers are "greedy", that is, they match as much as -possible (up to the maximum number of permitted times), without causing the -rest of the pattern to fail. The classic example of where this gives problems -is in trying to match comments in C programs. These appear between the -sequences /* and */ and within the sequence, individual * and / characters may -appear. An attempt to match C comments by applying the pattern -</P> -<P> -<PRE> - /\*.*\*/ -</PRE> -</P> -<P> -to the string -</P> -<P> -<PRE> - /* first command */ not comment /* second comment */ -</PRE> -</P> -<P> -fails, because it matches the entire string owing to the greediness of the .* -item. -</P> -<P> -However, if a quantifier is followed by a question mark, it ceases to be -greedy, and instead matches the minimum number of times possible, so the -pattern -</P> -<P> -<PRE> - /\*.*?\*/ -</PRE> -</P> -<P> -does the right thing with the C comments. The meaning of the various -quantifiers is not otherwise changed, just the preferred number of matches. -Do not confuse this use of question mark with its use as a quantifier in its -own right. Because it has two uses, it can sometimes appear doubled, as in -</P> -<P> -<PRE> - \d??\d -</PRE> -</P> -<P> -which matches one digit by preference, but can match two if that is the only -way the rest of the pattern matches. -</P> -<P> -If the PCRE_UNGREEDY option is set (an option which is not available in Perl), -the quantifiers are not greedy by default, but individual ones can be made -greedy by following them with a question mark. In other words, it inverts the -default behaviour. -</P> -<P> -When a parenthesized subpattern is quantified with a minimum repeat count that -is greater than 1 or with a limited maximum, more store is required for the -compiled pattern, in proportion to the size of the minimum or maximum. -</P> -<P> -If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent -to Perl's /s) is set, thus allowing the . to match newlines, the pattern is -implicitly anchored, because whatever follows will be tried against every -character position in the subject string, so there is no point in retrying the -overall match at any position after the first. PCRE treats such a pattern as -though it were preceded by \A. In cases where it is known that the subject -string contains no newlines, it is worth setting PCRE_DOTALL when the pattern -begins with .* in order to obtain this optimization, or alternatively using ^ -to indicate anchoring explicitly. -</P> -<P> -When a capturing subpattern is repeated, the value captured is the substring -that matched the final iteration. For example, after -</P> -<P> -<PRE> - (tweedle[dume]{3}\s*)+ -</PRE> -</P> -<P> -has matched "tweedledum tweedledee" the value of the captured substring is -"tweedledee". However, if there are nested capturing subpatterns, the -corresponding captured values may have been set in previous iterations. For -example, after -</P> -<P> -<PRE> - /(a|(b))+/ -</PRE> -</P> -<P> -matches "aba" the value of the second captured substring is "b". -</P> -<LI><A NAME="SEC23" HREF="#TOC1">BACK REFERENCES</A> -<P> -Outside a character class, a backslash followed by a digit greater than 0 (and -possibly further digits) is a back reference to a capturing subpattern earlier -(i.e. to its left) in the pattern, provided there have been that many previous -capturing left parentheses. -</P> -<P> -However, if the decimal number following the backslash is less than 10, it is -always taken as a back reference, and causes an error only if there are not -that many capturing left parentheses in the entire pattern. In other words, the -parentheses that are referenced need not be to the left of the reference for -numbers less than 10. See the section entitled "Backslash" above for further -details of the handling of digits following a backslash. -</P> -<P> -A back reference matches whatever actually matched the capturing subpattern in -the current subject string, rather than anything matching the subpattern -itself. So the pattern -</P> -<P> -<PRE> - (sens|respons)e and \1ibility -</PRE> -</P> -<P> -matches "sense and sensibility" and "response and responsibility", but not -"sense and responsibility". If caseful matching is in force at the time of the -back reference, the case of letters is relevant. For example, -</P> -<P> -<PRE> - ((?i)rah)\s+\1 -</PRE> -</P> -<P> -matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original -capturing subpattern is matched caselessly. -</P> -<P> -There may be more than one back reference to the same subpattern. If a -subpattern has not actually been used in a particular match, any back -references to it always fail. For example, the pattern -</P> -<P> -<PRE> - (a|(bc))\2 -</PRE> -</P> -<P> -always fails if it starts to match "a" rather than "bc". Because there may be -up to 99 back references, all digits following the backslash are taken -as part of a potential back reference number. If the pattern continues with a -digit character, some delimiter must be used to terminate the back reference. -If the PCRE_EXTENDED option is set, this can be whitespace. Otherwise an empty -comment can be used. -</P> -<P> -A back reference that occurs inside the parentheses to which it refers fails -when the subpattern is first used, so, for example, (a\1) never matches. -However, such references can be useful inside repeated subpatterns. For -example, the pattern -</P> -<P> -<PRE> - (a|b\1)+ -</PRE> -</P> -<P> -matches any number of "a"s and also "aba", "ababbaa" etc. At each iteration of -the subpattern, the back reference matches the character string corresponding -to the previous iteration. In order for this to work, the pattern must be such -that the first iteration does not need to match the back reference. This can be -done using alternation, as in the example above, or by a quantifier with a -minimum of zero. -</P> -<LI><A NAME="SEC24" HREF="#TOC1">ASSERTIONS</A> -<P> -An assertion is a test on the characters following or preceding the current -matching point that does not actually consume any characters. The simple -assertions coded as \b, \B, \A, \Z, \z, ^ and $ are described above. More -complicated assertions are coded as subpatterns. There are two kinds: those -that look ahead of the current position in the subject string, and those that -look behind it. -</P> -<P> -An assertion subpattern is matched in the normal way, except that it does not -cause the current matching position to be changed. Lookahead assertions start -with (?= for positive assertions and (?! for negative assertions. For example, -</P> -<P> -<PRE> - \w+(?=;) -</PRE> -</P> -<P> -matches a word followed by a semicolon, but does not include the semicolon in -the match, and -</P> -<P> -<PRE> - foo(?!bar) -</PRE> -</P> -<P> -matches any occurrence of "foo" that is not followed by "bar". Note that the -apparently similar pattern -</P> -<P> -<PRE> - (?!foo)bar -</PRE> -</P> -<P> -does not find an occurrence of "bar" that is preceded by something other than -"foo"; it finds any occurrence of "bar" whatsoever, because the assertion -(?!foo) is always true when the next three characters are "bar". A -lookbehind assertion is needed to achieve this effect. -</P> -<P> -Lookbehind assertions start with (?<= for positive assertions and (?<! for -negative assertions. For example, -</P> -<P> -<PRE> - (?<!foo)bar -</PRE> -</P> -<P> -does find an occurrence of "bar" that is not preceded by "foo". The contents of -a lookbehind assertion are restricted such that all the strings it matches must -have a fixed length. However, if there are several alternatives, they do not -all have to have the same fixed length. Thus -</P> -<P> -<PRE> - (?<=bullock|donkey) -</PRE> -</P> -<P> -is permitted, but -</P> -<P> -<PRE> - (?<!dogs?|cats?) -</PRE> -</P> -<P> -causes an error at compile time. Branches that match different length strings -are permitted only at the top level of a lookbehind assertion. This is an -extension compared with Perl 5.005, which requires all branches to match the -same length of string. An assertion such as -</P> -<P> -<PRE> - (?<=ab(c|de)) -</PRE> -</P> -<P> -is not permitted, because its single top-level branch can match two different -lengths, but it is acceptable if rewritten to use two top-level branches: -</P> -<P> -<PRE> - (?<=abc|abde) -</PRE> -</P> -<P> -The implementation of lookbehind assertions is, for each alternative, to -temporarily move the current position back by the fixed width and then try to -match. If there are insufficient characters before the current position, the -match is deemed to fail. Lookbehinds in conjunction with once-only subpatterns -can be particularly useful for matching at the ends of strings; an example is -given at the end of the section on once-only subpatterns. -</P> -<P> -Several assertions (of any sort) may occur in succession. For example, -</P> -<P> -<PRE> - (?<=\d{3})(?<!999)foo -</PRE> -</P> -<P> -matches "foo" preceded by three digits that are not "999". Notice that each of -the assertions is applied independently at the same point in the subject -string. First there is a check that the previous three characters are all -digits, and then there is a check that the same three characters are not "999". -This pattern does <I>not</I> match "foo" preceded by six characters, the first -of which are digits and the last three of which are not "999". For example, it -doesn't match "123abcfoo". A pattern to do that is -</P> -<P> -<PRE> - (?<=\d{3}...)(?<!999)foo -</PRE> -</P> -<P> -This time the first assertion looks at the preceding six characters, checking -that the first three are digits, and then the second assertion checks that the -preceding three characters are not "999". -</P> -<P> -Assertions can be nested in any combination. For example, -</P> -<P> -<PRE> - (?<=(?<!foo)bar)baz -</PRE> -</P> -<P> -matches an occurrence of "baz" that is preceded by "bar" which in turn is not -preceded by "foo", while -</P> -<P> -<PRE> - (?<=\d{3}(?!999)...)foo -</PRE> -</P> -<P> -is another pattern which matches "foo" preceded by three digits and any three -characters that are not "999". -</P> -<P> -Assertion subpatterns are not capturing subpatterns, and may not be repeated, -because it makes no sense to assert the same thing several times. If any kind -of assertion contains capturing subpatterns within it, these are counted for -the purposes of numbering the capturing subpatterns in the whole pattern. -However, substring capturing is carried out only for positive assertions, -because it does not make sense for negative assertions. -</P> -<P> -Assertions count towards the maximum of 200 parenthesized subpatterns. -</P> -<LI><A NAME="SEC25" HREF="#TOC1">ONCE-ONLY SUBPATTERNS</A> -<P> -With both maximizing and minimizing repetition, failure of what follows -normally causes the repeated item to be re-evaluated to see if a different -number of repeats allows the rest of the pattern to match. Sometimes it is -useful to prevent this, either to change the nature of the match, or to cause -it fail earlier than it otherwise might, when the author of the pattern knows -there is no point in carrying on. -</P> -<P> -Consider, for example, the pattern \d+foo when applied to the subject line -</P> -<P> -<PRE> - 123456bar -</PRE> -</P> -<P> -After matching all 6 digits and then failing to match "foo", the normal -action of the matcher is to try again with only 5 digits matching the \d+ -item, and then with 4, and so on, before ultimately failing. Once-only -subpatterns provide the means for specifying that once a portion of the pattern -has matched, it is not to be re-evaluated in this way, so the matcher would -give up immediately on failing to match "foo" the first time. The notation is -another kind of special parenthesis, starting with (?> as in this example: -</P> -<P> -<PRE> - (?>\d+)bar -</PRE> -</P> -<P> -This kind of parenthesis "locks up" the part of the pattern it contains once -it has matched, and a failure further into the pattern is prevented from -backtracking into it. Backtracking past it to previous items, however, works as -normal. -</P> -<P> -An alternative description is that a subpattern of this type matches the string -of characters that an identical standalone pattern would match, if anchored at -the current point in the subject string. -</P> -<P> -Once-only subpatterns are not capturing subpatterns. Simple cases such as the -above example can be thought of as a maximizing repeat that must swallow -everything it can. So, while both \d+ and \d+? are prepared to adjust the -number of digits they match in order to make the rest of the pattern match, -(?>\d+) can only match an entire sequence of digits. -</P> -<P> -This construction can of course contain arbitrarily complicated subpatterns, -and it can be nested. -</P> -<P> -Once-only subpatterns can be used in conjunction with lookbehind assertions to -specify efficient matching at the end of the subject string. Consider a simple -pattern such as -</P> -<P> -<PRE> - abcd$ -</PRE> -</P> -<P> -when applied to a long string which does not match. Because matching proceeds -from left to right, PCRE will look for each "a" in the subject and then see if -what follows matches the rest of the pattern. If the pattern is specified as -</P> -<P> -<PRE> - ^.*abcd$ -</PRE> -</P> -<P> -the initial .* matches the entire string at first, but when this fails (because -there is no following "a"), it backtracks to match all but the last character, -then all but the last two characters, and so on. Once again the search for "a" -covers the entire string, from right to left, so we are no better off. However, -if the pattern is written as -</P> -<P> -<PRE> - ^(?>.*)(?<=abcd) -</PRE> -</P> -<P> -there can be no backtracking for the .* item; it can match only the entire -string. The subsequent lookbehind assertion does a single test on the last four -characters. If it fails, the match fails immediately. For long strings, this -approach makes a significant difference to the processing time. -</P> -<P> -When a pattern contains an unlimited repeat inside a subpattern that can itself -be repeated an unlimited number of times, the use of a once-only subpattern is -the only way to avoid some failing matches taking a very long time indeed. -The pattern -</P> -<P> -<PRE> - (\D+|<\d+>)*[!?] -</PRE> -</P> -<P> -matches an unlimited number of substrings that either consist of non-digits, or -digits enclosed in <>, followed by either ! or ?. When it matches, it runs -quickly. However, if it is applied to -</P> -<P> -<PRE> - aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa -</PRE> -</P> -<P> -it takes a long time before reporting failure. This is because the string can -be divided between the two repeats in a large number of ways, and all have to -be tried. (The example used [!?] rather than a single character at the end, -because both PCRE and Perl have an optimization that allows for fast failure -when a single character is used. They remember the last single character that -is required for a match, and fail early if it is not present in the string.) -If the pattern is changed to -</P> -<P> -<PRE> - ((?>\D+)|<\d+>)*[!?] -</PRE> -</P> -<P> -sequences of non-digits cannot be broken, and failure happens quickly. -</P> -<LI><A NAME="SEC26" HREF="#TOC1">CONDITIONAL SUBPATTERNS</A> -<P> -It is possible to cause the matching process to obey a subpattern -conditionally or to choose between two alternative subpatterns, depending on -the result of an assertion, or whether a previous capturing subpattern matched -or not. The two possible forms of conditional subpattern are -</P> -<P> -<PRE> - (?(condition)yes-pattern) - (?(condition)yes-pattern|no-pattern) -</PRE> -</P> -<P> -If the condition is satisfied, the yes-pattern is used; otherwise the -no-pattern (if present) is used. If there are more than two alternatives in the -subpattern, a compile-time error occurs. -</P> -<P> -There are two kinds of condition. If the text between the parentheses consists -of a sequence of digits, the condition is satisfied if the capturing subpattern -of that number has previously matched. The number must be greater than zero. -Consider the following pattern, which contains non-significant white space to -make it more readable (assume the PCRE_EXTENDED option) and to divide it into -three parts for ease of discussion: -</P> -<P> -<PRE> - ( $ )? [^()]+ (?(1) $ ) -</PRE> -</P> -<P> -The first part matches an optional opening parenthesis, and if that -character is present, sets it as the first captured substring. The second part -matches one or more characters that are not parentheses. The third part is a -conditional subpattern that tests whether the first set of parentheses matched -or not. If they did, that is, if subject started with an opening parenthesis, -the condition is true, and so the yes-pattern is executed and a closing -parenthesis is required. Otherwise, since no-pattern is not present, the -subpattern matches nothing. In other words, this pattern matches a sequence of -non-parentheses, optionally enclosed in parentheses. -</P> -<P> -If the condition is not a sequence of digits, it must be an assertion. This may -be a positive or negative lookahead or lookbehind assertion. Consider this -pattern, again containing non-significant white space, and with the two -alternatives on the second line: -</P> -<P> -<PRE> - (?(?=[^a-z]*[a-z]) - \d{2}-[a-z]{3}-\d{2} | \d{2}-\d{2}-\d{2} ) -</PRE> -</P> -<P> -The condition is a positive lookahead assertion that matches an optional -sequence of non-letters followed by a letter. In other words, it tests for the -presence of at least one letter in the subject. If a letter is found, the -subject is matched against the first alternative; otherwise it is matched -against the second. This pattern matches strings in one of the two forms -dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits. -</P> -<LI><A NAME="SEC27" HREF="#TOC1">COMMENTS</A> -<P> -The sequence (?# marks the start of a comment which continues up to the next -closing parenthesis. Nested parentheses are not permitted. The characters -that make up a comment play no part in the pattern matching at all. -</P> -<P> -If the PCRE_EXTENDED option is set, an unescaped # character outside a -character class introduces a comment that continues up to the next newline -character in the pattern. -</P> -<LI><A NAME="SEC28" HREF="#TOC1">RECURSIVE PATTERNS</A> -<P> -Consider the problem of matching a string in parentheses, allowing for -unlimited nested parentheses. Without the use of recursion, the best that can -be done is to use a pattern that matches up to some fixed depth of nesting. It -is not possible to handle an arbitrary nesting depth. Perl 5.6 has provided an -experimental facility that allows regular expressions to recurse (amongst other -things). It does this by interpolating Perl code in the expression at run time, -and the code can refer to the expression itself. A Perl pattern to solve the -parentheses problem can be created like this: -</P> -<P> -<PRE> - $re = qr{$ (?: (?>[^()]+) | (?p{$re}) )* $}x; -</PRE> -</P> -<P> -The (?p{...}) item interpolates Perl code at run time, and in this case refers -recursively to the pattern in which it appears. Obviously, PCRE cannot support -the interpolation of Perl code. Instead, the special item (?R) is provided for -the specific case of recursion. This PCRE pattern solves the parentheses -problem (assume the PCRE_EXTENDED option is set so that white space is -ignored): -</P> -<P> -<PRE> - $ ( (?>[^()]+) | (?R) )* $ -</PRE> -</P> -<P> -First it matches an opening parenthesis. Then it matches any number of -substrings which can either be a sequence of non-parentheses, or a recursive -match of the pattern itself (i.e. a correctly parenthesized substring). Finally -there is a closing parenthesis. -</P> -<P> -This particular example pattern contains nested unlimited repeats, and so the -use of a once-only subpattern for matching strings of non-parentheses is -important when applying the pattern to strings that do not match. For example, -when it is applied to -</P> -<P> -<PRE> - (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa() -</PRE> -</P> -<P> -it yields "no match" quickly. However, if a once-only subpattern is not used, -the match runs for a very long time indeed because there are so many different -ways the + and * repeats can carve up the subject, and all have to be tested -before failure can be reported. -</P> -<P> -The values set for any capturing subpatterns are those from the outermost level -of the recursion at which the subpattern value is set. If the pattern above is -matched against -</P> -<P> -<PRE> - (ab(cd)ef) -</PRE> -</P> -<P> -the value for the capturing parentheses is "ef", which is the last value taken -on at the top level. If additional parentheses are added, giving -</P> -<P> -<PRE> - $ ( ( (?>[^()]+) | (?R) )* ) $ - ^ ^ - ^ ^ -</PRE> -the string they capture is "ab(cd)ef", the contents of the top level -parentheses. If there are more than 15 capturing parentheses in a pattern, PCRE -has to obtain extra memory to store data during a recursion, which it does by -using <B>pcre_malloc</B>, freeing it via <B>pcre_free</B> afterwards. If no -memory can be obtained, it saves data for the first 15 capturing parentheses -only, as there is no way to give an out-of-memory error from within a -recursion. -</P> -<LI><A NAME="SEC29" HREF="#TOC1">PERFORMANCE</A> -<P> -Certain items that may appear in patterns are more efficient than others. It is -more efficient to use a character class like [aeiou] than a set of alternatives -such as (a|e|i|o|u). In general, the simplest construction that provides the -required behaviour is usually the most efficient. Jeffrey Friedl's book -contains a lot of discussion about optimizing regular expressions for efficient -performance. -</P> -<P> -When a pattern begins with .* and the PCRE_DOTALL option is set, the pattern is -implicitly anchored by PCRE, since it can match only at the start of a subject -string. However, if PCRE_DOTALL is not set, PCRE cannot make this optimization, -because the . metacharacter does not then match a newline, and if the subject -string contains newlines, the pattern may match from the character immediately -following one of them instead of from the very start. For example, the pattern -</P> -<P> -<PRE> - (.*) second -</PRE> -</P> -<P> -matches the subject "first\nand second" (where \n stands for a newline -character) with the first captured substring being "and". In order to do this, -PCRE has to retry the match starting after every newline in the subject. -</P> -<P> -If you are using such a pattern with subject strings that do not contain -newlines, the best performance is obtained by setting PCRE_DOTALL, or starting -the pattern with ^.* to indicate explicit anchoring. That saves PCRE from -having to scan along the subject looking for a newline to restart at. -</P> -<P> -Beware of patterns that contain nested indefinite repeats. These can take a -long time to run when applied to a string that does not match. Consider the -pattern fragment -</P> -<P> -<PRE> - (a+)* -</PRE> -</P> -<P> -This can match "aaaa" in 33 different ways, and this number increases very -rapidly as the string gets longer. (The * repeat can match 0, 1, 2, 3, or 4 -times, and for each of those cases other than 0, the + repeats can match -different numbers of times.) When the remainder of the pattern is such that the -entire match is going to fail, PCRE has in principle to try every possible -variation, and this can take an extremely long time. -</P> -<P> -An optimization catches some of the more simple cases such as -</P> -<P> -<PRE> - (a+)*b -</PRE> -</P> -<P> -where a literal character follows. Before embarking on the standard matching -procedure, PCRE checks that there is a "b" later in the subject string, and if -there is not, it fails the match immediately. However, when there is no -following literal this optimization cannot be used. You can see the difference -by comparing the behaviour of -</P> -<P> -<PRE> - (a+)*\d -</PRE> -</P> -<P> -with the pattern above. The former gives a failure almost instantly when -applied to a whole line of "a" characters, whereas the latter takes an -appreciable time with strings longer than about 20 characters. -</P> -<LI><A NAME="SEC30" HREF="#TOC1">UTF-8 SUPPORT</A> -<P> -Starting at release 3.3, PCRE has some support for character strings encoded -in the UTF-8 format. This is incomplete, and is regarded as experimental. In -order to use it, you must configure PCRE to include UTF-8 support in the code, -and, in addition, you must call <B>pcre_compile()</B> with the PCRE_UTF8 option -flag. When you do this, both the pattern and any subject strings that are -matched against it are treated as UTF-8 strings instead of just strings of -bytes, but only in the cases that are mentioned below. -</P> -<P> -If you compile PCRE with UTF-8 support, but do not use it at run time, the -library will be a bit bigger, but the additional run time overhead is limited -to testing the PCRE_UTF8 flag in several places, so should not be very large. -</P> -<P> -PCRE assumes that the strings it is given contain valid UTF-8 codes. It does -not diagnose invalid UTF-8 strings. If you pass invalid UTF-8 strings to PCRE, -the results are undefined. -</P> -<P> -Running with PCRE_UTF8 set causes these changes in the way PCRE works: -</P> -<P> -1. In a pattern, the escape sequence \x{...}, where the contents of the braces -is a string of hexadecimal digits, is interpreted as a UTF-8 character whose -code number is the given hexadecimal number, for example: \x{1234}. This -inserts from one to six literal bytes into the pattern, using the UTF-8 -encoding. If a non-hexadecimal digit appears between the braces, the item is -not recognized. -</P> -<P> -2. The original hexadecimal escape sequence, \xhh, generates a two-byte UTF-8 -character if its value is greater than 127. -</P> -<P> -3. Repeat quantifiers are NOT correctly handled if they follow a multibyte -character. For example, \x{100}* and \xc3+ do not work. If you want to -repeat such characters, you must enclose them in non-capturing parentheses, -for example (?:\x{100}), at present. -</P> -<P> -4. The dot metacharacter matches one UTF-8 character instead of a single byte. -</P> -<P> -5. Unlike literal UTF-8 characters, the dot metacharacter followed by a -repeat quantifier does operate correctly on UTF-8 characters instead of -single bytes. -</P> -<P> -4. Although the \x{...} escape is permitted in a character class, characters -whose values are greater than 255 cannot be included in a class. -</P> -<P> -5. A class is matched against a UTF-8 character instead of just a single byte, -but it can match only characters whose values are less than 256. Characters -with greater values always fail to match a class. -</P> -<P> -6. Repeated classes work correctly on multiple characters. -</P> -<P> -7. Classes containing just a single character whose value is greater than 127 -(but less than 256), for example, [\x80] or [^\x{93}], do not work because -these are optimized into single byte matches. In the first case, of course, -the class brackets are just redundant. -</P> -<P> -8. Lookbehind assertions move backwards in the subject by a fixed number of -characters instead of a fixed number of bytes. Simple cases have been tested -to work correctly, but there may be hidden gotchas herein. -</P> -<P> -9. The character types such as \d and \w do not work correctly with UTF-8 -characters. They continue to test a single byte. -</P> -<P> -10. Anything not explicitly mentioned here continues to work in bytes rather -than in characters. -</P> -<P> -The following UTF-8 features of Perl 5.6 are not implemented: -</P> -<P> -1. The escape sequence \C to match a single byte. -</P> -<P> -2. The use of Unicode tables and properties and escapes \p, \P, and \X. -</P> -<LI><A NAME="SEC31" HREF="#TOC1">AUTHOR</A> -<P> -Philip Hazel <ph10(a)cam.ac.uk> -<BR> -University Computing Service, -<BR> -New Museums Site, -<BR> -Cambridge CB2 3QG, England. -<BR> -Phone: +44 1223 334714 -</P> -<P> -Last updated: 28 August 2000, -<BR> -<PRE> - the 250th anniversary of the death of J.S. Bach. -<BR> -</PRE> -Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcre.txt b/external/privoxy/pcre/doc/pcre.txt deleted file mode 100644 index 1db4b53..0000000 --- a/external/privoxy/pcre/doc/pcre.txt +++ /dev/null @@ -1,2125 +0,0 @@ -NAME - pcre - Perl-compatible regular expressions. - - - -SYNOPSIS - #include <pcre.h> - - pcre *pcre_compile(const char *pattern, int options, - const char **errptr, int *erroffset, - const unsigned char *tableptr); - - pcre_extra *pcre_study(const pcre *code, int options, - const char **errptr); - - int pcre_exec(const pcre *code, const pcre_extra *extra, - const char *subject, int length, int startoffset, - int options, int *ovector, int ovecsize); - - int pcre_copy_substring(const char *subject, int *ovector, - int stringcount, int stringnumber, char *buffer, - int buffersize); - - int pcre_get_substring(const char *subject, int *ovector, - int stringcount, int stringnumber, - const char **stringptr); - - int pcre_get_substring_list(const char *subject, - int *ovector, int stringcount, const char ***listptr); - - void pcre_free_substring(const char *stringptr); - - void pcre_free_substring_list(const char **stringptr); - - const unsigned char *pcre_maketables(void); - - int pcre_fullinfo(const pcre *code, const pcre_extra *extra, - int what, void *where); - - int pcre_info(const pcre *code, int *optptr, *firstcharptr); - - char *pcre_version(void); - - void *(*pcre_malloc)(size_t); - - void (*pcre_free)(void *); - - - - -DESCRIPTION - The PCRE library is a set of functions that implement regu- - lar expression pattern matching using the same syntax and - semantics as Perl 5, with just a few differences (see - - below). The current implementation corresponds to Perl - 5.005, with some additional features from later versions. - This includes some experimental, incomplete support for - UTF-8 encoded strings. Details of exactly what is and what - is not supported are given below. - - PCRE has its own native API, which is described in this - document. There is also a set of wrapper functions that - correspond to the POSIX regular expression API. These are - described in the pcreposix documentation. - - The native API function prototypes are defined in the header - file pcre.h, and on Unix systems the library itself is - called libpcre.a, so can be accessed by adding -lpcre to the - command for linking an application which calls it. The - header file defines the macros PCRE_MAJOR and PCRE_MINOR to - contain the major and minor release numbers for the library. - Applications can use these to include support for different - releases. - - The functions pcre_compile(), pcre_study(), and pcre_exec() - are used for compiling and matching regular expressions. - - The functions pcre_copy_substring(), pcre_get_substring(), - and pcre_get_substring_list() are convenience functions for - extracting captured substrings from a matched subject - string; pcre_free_substring() and pcre_free_substring_list() - are also provided, to free the memory used for extracted - strings. - - The function pcre_maketables() is used (optionally) to build - a set of character tables in the current locale for passing - to pcre_compile(). - - The function pcre_fullinfo() is used to find out information - about a compiled pattern; pcre_info() is an obsolete version - which returns only some of the available information, but is - retained for backwards compatibility. The function - pcre_version() returns a pointer to a string containing the - version of PCRE and its date of release. - - The global variables pcre_malloc and pcre_free initially - contain the entry points of the standard malloc() and free() - functions respectively. PCRE calls the memory management - functions via these variables, so a calling program can - replace them if it wishes to intercept the calls. This - should be done before calling any PCRE functions. - - - -MULTI-THREADING - The PCRE functions can be used in multi-threading - - - - - -SunOS 5.8 Last change: 2 - - - - applications, with the proviso that the memory management - functions pointed to by pcre_malloc and pcre_free are shared - by all threads. - - The compiled form of a regular expression is not altered - during matching, so the same compiled pattern can safely be - used by several threads at once. - - - -COMPILING A PATTERN - The function pcre_compile() is called to compile a pattern - into an internal form. The pattern is a C string terminated - by a binary zero, and is passed in the argument pattern. A - pointer to a single block of memory that is obtained via - pcre_malloc is returned. This contains the compiled code and - related data. The pcre type is defined for this for conveni- - ence, but in fact pcre is just a typedef for void, since the - contents of the block are not externally defined. It is up - to the caller to free the memory when it is no longer - required. - - The size of a compiled pattern is roughly proportional to - the length of the pattern string, except that each character - class (other than those containing just a single character, - negated or not) requires 33 bytes, and repeat quantifiers - with a minimum greater than one or a bounded maximum cause - the relevant portions of the compiled pattern to be repli- - cated. - - The options argument contains independent bits that affect - the compilation. It should be zero if no options are - required. Some of the options, in particular, those that are - compatible with Perl, can also be set and unset from within - the pattern (see the detailed description of regular expres- - sions below). For these options, the contents of the options - argument specifies their initial settings at the start of - compilation and execution. The PCRE_ANCHORED option can be - set at the time of matching as well as at compile time. - - If errptr is NULL, pcre_compile() returns NULL immediately. - Otherwise, if compilation of a pattern fails, pcre_compile() - returns NULL, and sets the variable pointed to by errptr to - point to a textual error message. The offset from the start - of the pattern to the character where the error was - discovered is placed in the variable pointed to by - erroffset, which must not be NULL. If it is, an immediate - error is given. - - If the final argument, tableptr, is NULL, PCRE uses a - default set of character tables which are built when it is - compiled, using the default C locale. Otherwise, tableptr - must be the result of a call to pcre_maketables(). See the - section on locale support below. - - The following option bits are defined in the header file: - - PCRE_ANCHORED - - If this bit is set, the pattern is forced to be "anchored", - that is, it is constrained to match only at the start of the - string which is being searched (the "subject string"). This - effect can also be achieved by appropriate constructs in the - pattern itself, which is the only way to do it in Perl. - - PCRE_CASELESS - - If this bit is set, letters in the pattern match both upper - and lower case letters. It is equivalent to Perl's /i - option. - - PCRE_DOLLAR_ENDONLY - - If this bit is set, a dollar metacharacter in the pattern - matches only at the end of the subject string. Without this - option, a dollar also matches immediately before the final - character if it is a newline (but not before any other new- - lines). The PCRE_DOLLAR_ENDONLY option is ignored if - PCRE_MULTILINE is set. There is no equivalent to this option - in Perl. - - PCRE_DOTALL - - If this bit is set, a dot metacharater in the pattern - matches all characters, including newlines. Without it, new- - lines are excluded. This option is equivalent to Perl's /s - option. A negative class such as [^a] always matches a new- - line character, independent of the setting of this option. - - PCRE_EXTENDED - - If this bit is set, whitespace data characters in the pat- - tern are totally ignored except when escaped or inside a - character class, and characters between an unescaped # out- - side a character class and the next newline character, - inclusive, are also ignored. This is equivalent to Perl's /x - option, and makes it possible to include comments inside - complicated patterns. Note, however, that this applies only - to data characters. Whitespace characters may never appear - within special character sequences in a pattern, for example - within the sequence (?( which introduces a conditional sub- - pattern. - - PCRE_EXTRA - - This option was invented in order to turn on additional - functionality of PCRE that is incompatible with Perl, but it - is currently of very little use. When set, any backslash in - a pattern that is followed by a letter that has no special - meaning causes an error, thus reserving these combinations - for future expansion. By default, as in Perl, a backslash - followed by a letter with no special meaning is treated as a - literal. There are at present no other features controlled - by this option. It can also be set by a (?X) option setting - within a pattern. - - PCRE_MULTILINE - - By default, PCRE treats the subject string as consisting of - a single "line" of characters (even if it actually contains - several newlines). The "start of line" metacharacter (^) - matches only at the start of the string, while the "end of - line" metacharacter ($) matches only at the end of the - string, or before a terminating newline (unless - PCRE_DOLLAR_ENDONLY is set). This is the same as Perl. - - When PCRE_MULTILINE it is set, the "start of line" and "end - of line" constructs match immediately following or immedi- - ately before any newline in the subject string, respec- - tively, as well as at the very start and end. This is - equivalent to Perl's /m option. If there are no "\n" charac- - ters in a subject string, or no occurrences of ^ or $ in a - pattern, setting PCRE_MULTILINE has no effect. - - PCRE_UNGREEDY - - This option inverts the "greediness" of the quantifiers so - that they are not greedy by default, but become greedy if - followed by "?". It is not compatible with Perl. It can also - be set by a (?U) option setting within the pattern. - - PCRE_UTF8 - - This option causes PCRE to regard both the pattern and the - subject as strings of UTF-8 characters instead of just byte - strings. However, it is available only if PCRE has been - built to include UTF-8 support. If not, the use of this - option provokes an error. Support for UTF-8 is new, experi- - mental, and incomplete. Details of exactly what it entails - are given below. - - - -STUDYING A PATTERN - When a pattern is going to be used several times, it is - worth spending more time analyzing it in order to speed up - the time taken for matching. The function pcre_study() takes - - a pointer to a compiled pattern as its first argument, and - returns a pointer to a pcre_extra block (another void - typedef) containing additional information about the pat- - tern; this can be passed to pcre_exec(). If no additional - information is available, NULL is returned. - - The second argument contains option bits. At present, no - options are defined for pcre_study(), and this argument - should always be zero. - - The third argument for pcre_study() is a pointer to an error - message. If studying succeeds (even if no data is returned), - the variable it points to is set to NULL. Otherwise it - points to a textual error message. - - At present, studying a pattern is useful only for non- - anchored patterns that do not have a single fixed starting - character. A bitmap of possible starting characters is - created. - - - -LOCALE SUPPORT - PCRE handles caseless matching, and determines whether char- - acters are letters, digits, or whatever, by reference to a - set of tables. The library contains a default set of tables - which is created in the default C locale when PCRE is com- - piled. This is used when the final argument of - pcre_compile() is NULL, and is sufficient for many applica- - tions. - - An alternative set of tables can, however, be supplied. Such - tables are built by calling the pcre_maketables() function, - which has no arguments, in the relevant locale. The result - can then be passed to pcre_compile() as often as necessary. - For example, to build and use tables that are appropriate - for the French locale (where accented characters with codes - greater than 128 are treated as letters), the following code - could be used: - - setlocale(LC_CTYPE, "fr"); - tables = pcre_maketables(); - re = pcre_compile(..., tables); - - The tables are built in memory that is obtained via - pcre_malloc. The pointer that is passed to pcre_compile is - saved with the compiled pattern, and the same tables are - used via this pointer by pcre_study() and pcre_exec(). Thus - for any single pattern, compilation, studying and matching - all happen in the same locale, but different patterns can be - compiled in different locales. It is the caller's responsi- - bility to ensure that the memory containing the tables - remains available for as long as it is needed. - - - -INFORMATION ABOUT A PATTERN - The pcre_fullinfo() function returns information about a - compiled pattern. It replaces the obsolete pcre_info() func- - tion, which is nevertheless retained for backwards compabil- - ity (and is documented below). - - The first argument for pcre_fullinfo() is a pointer to the - compiled pattern. The second argument is the result of - pcre_study(), or NULL if the pattern was not studied. The - third argument specifies which piece of information is - required, while the fourth argument is a pointer to a vari- - able to receive the data. The yield of the function is zero - for success, or one of the following negative numbers: - - PCRE_ERROR_NULL the argument code was NULL - the argument where was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found - PCRE_ERROR_BADOPTION the value of what was invalid - - The possible values for the third argument are defined in - pcre.h, and are as follows: - - PCRE_INFO_OPTIONS - - Return a copy of the options with which the pattern was com- - piled. The fourth argument should point to au unsigned long - int variable. These option bits are those specified in the - call to pcre_compile(), modified by any top-level option - settings within the pattern itself, and with the - PCRE_ANCHORED bit forcibly set if the form of the pattern - implies that it can match only at the start of a subject - string. - - PCRE_INFO_SIZE - - Return the size of the compiled pattern, that is, the value - that was passed as the argument to pcre_malloc() when PCRE - was getting memory in which to place the compiled data. The - fourth argument should point to a size_t variable. - - PCRE_INFO_CAPTURECOUNT - - Return the number of capturing subpatterns in the pattern. - The fourth argument should point to an int variable. - - PCRE_INFO_BACKREFMAX - - Return the number of the highest back reference in the - pattern. The fourth argument should point to an int vari- - able. Zero is returned if there are no back references. - - PCRE_INFO_FIRSTCHAR - - Return information about the first character of any matched - string, for a non-anchored pattern. If there is a fixed - first character, e.g. from a pattern such as - (cat|cow|coyote), it is returned in the integer pointed to - by where. Otherwise, if either - - (a) the pattern was compiled with the PCRE_MULTILINE option, - and every branch starts with "^", or - - (b) every branch of the pattern starts with ".*" and - PCRE_DOTALL is not set (if it were set, the pattern would be - anchored), - - -1 is returned, indicating that the pattern matches only at - the start of a subject string or after any "\n" within the - string. Otherwise -2 is returned. For anchored patterns, -2 - is returned. - - PCRE_INFO_FIRSTTABLE - - If the pattern was studied, and this resulted in the con- - struction of a 256-bit table indicating a fixed set of char- - acters for the first character in any matching string, a - pointer to the table is returned. Otherwise NULL is - returned. The fourth argument should point to an unsigned - char * variable. - - PCRE_INFO_LASTLITERAL - - For a non-anchored pattern, return the value of the right- - most literal character which must exist in any matched - string, other than at its start. The fourth argument should - point to an int variable. If there is no such character, or - if the pattern is anchored, -1 is returned. For example, for - the pattern /a\d+z\d+/ the returned value is 'z'. - - The pcre_info() function is now obsolete because its inter- - face is too restrictive to return all the available data - about a compiled pattern. New programs should use - pcre_fullinfo() instead. The yield of pcre_info() is the - number of capturing subpatterns, or one of the following - negative numbers: - - PCRE_ERROR_NULL the argument code was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found - - If the optptr argument is not NULL, a copy of the options - with which the pattern was compiled is placed in the integer - it points to (see PCRE_INFO_OPTIONS above). - - If the pattern is not anchored and the firstcharptr argument - is not NULL, it is used to pass back information about the - first character of any matched string (see - PCRE_INFO_FIRSTCHAR above). - - - -MATCHING A PATTERN - The function pcre_exec() is called to match a subject string - against a pre-compiled pattern, which is passed in the code - argument. If the pattern has been studied, the result of the - study should be passed in the extra argument. Otherwise this - must be NULL. - - The PCRE_ANCHORED option can be passed in the options argu- - ment, whose unused bits must be zero. However, if a pattern - was compiled with PCRE_ANCHORED, or turned out to be - anchored by virtue of its contents, it cannot be made - unachored at matching time. - - There are also three further options that can be set only at - matching time: - - PCRE_NOTBOL - - The first character of the string is not the beginning of a - line, so the circumflex metacharacter should not match - before it. Setting this without PCRE_MULTILINE (at compile - time) causes circumflex never to match. - - PCRE_NOTEOL - - The end of the string is not the end of a line, so the dol- - lar metacharacter should not match it nor (except in multi- - line mode) a newline immediately before it. Setting this - without PCRE_MULTILINE (at compile time) causes dollar never - to match. - - PCRE_NOTEMPTY - - An empty string is not considered to be a valid match if - this option is set. If there are alternatives in the pat- - tern, they are tried. If all the alternatives match the - empty string, the entire match fails. For example, if the - pattern - - a?b? - - is applied to a string not beginning with "a" or "b", it - matches the empty string at the start of the subject. With - PCRE_NOTEMPTY set, this match is not valid, so PCRE searches - further into the string for occurrences of "a" or "b". - - Perl has no direct equivalent of PCRE_NOTEMPTY, but it does - make a special case of a pattern match of the empty string - within its split() function, and when using the /g modifier. - It is possible to emulate Perl's behaviour after matching a - null string by first trying the match again at the same - offset with PCRE_NOTEMPTY set, and then if that fails by - advancing the starting offset (see below) and trying an - ordinary match again. - - The subject string is passed as a pointer in subject, a - length in length, and a starting offset in startoffset. - Unlike the pattern string, it may contain binary zero char- - acters. When the starting offset is zero, the search for a - match starts at the beginning of the subject, and this is by - far the most common case. - - A non-zero starting offset is useful when searching for - another match in the same subject by calling pcre_exec() - again after a previous success. Setting startoffset differs - from just passing over a shortened string and setting - PCRE_NOTBOL in the case of a pattern that begins with any - kind of lookbehind. For example, consider the pattern - - \Biss\B - - which finds occurrences of "iss" in the middle of words. (\B - matches only if the current position in the subject is not a - word boundary.) When applied to the string "Mississipi" the - first call to pcre_exec() finds the first occurrence. If - pcre_exec() is called again with just the remainder of the - subject, namely "issipi", it does not match, because \B is - always false at the start of the subject, which is deemed to - be a word boundary. However, if pcre_exec() is passed the - entire string again, but with startoffset set to 4, it finds - the second occurrence of "iss" because it is able to look - behind the starting point to discover that it is preceded by - a letter. - - If a non-zero starting offset is passed when the pattern is - anchored, one attempt to match at the given offset is tried. - This can only succeed if the pattern does not require the - match to be at the start of the subject. - - In general, a pattern matches a certain portion of the sub- - ject, and in addition, further substrings from the subject - may be picked out by parts of the pattern. Following the - usage in Jeffrey Friedl's book, this is called "capturing" - in what follows, and the phrase "capturing subpattern" is - used for a fragment of a pattern that picks out a substring. - PCRE supports several other kinds of parenthesized subpat- - tern that do not cause substrings to be captured. - - Captured substrings are returned to the caller via a vector - of integer offsets whose address is passed in ovector. The - number of elements in the vector is passed in ovecsize. The - first two-thirds of the vector is used to pass back captured - substrings, each substring using a pair of integers. The - remaining third of the vector is used as workspace by - pcre_exec() while matching capturing subpatterns, and is not - available for passing back information. The length passed in - ovecsize should always be a multiple of three. If it is not, - it is rounded down. - - When a match has been successful, information about captured - substrings is returned in pairs of integers, starting at the - beginning of ovector, and continuing up to two-thirds of its - length at the most. The first element of a pair is set to - the offset of the first character in a substring, and the - second is set to the offset of the first character after the - end of a substring. The first pair, ovector[0] and ovec- - tor[1], identify the portion of the subject string matched - by the entire pattern. The next pair is used for the first - capturing subpattern, and so on. The value returned by - pcre_exec() is the number of pairs that have been set. If - there are no capturing subpatterns, the return value from a - successful match is 1, indicating that just the first pair - of offsets has been set. - - Some convenience functions are provided for extracting the - captured substrings as separate strings. These are described - in the following section. - - It is possible for an capturing subpattern number n+1 to - match some part of the subject when subpattern n has not - been used at all. For example, if the string "abc" is - matched against the pattern (a|(z))(bc) subpatterns 1 and 3 - are matched, but 2 is not. When this happens, both offset - values corresponding to the unused subpattern are set to -1. - - If a capturing subpattern is matched repeatedly, it is the - last portion of the string that it matched that gets - returned. - - If the vector is too small to hold all the captured sub- - strings, it is used as far as possible (up to two-thirds of - its length), and the function returns a value of zero. In - particular, if the substring offsets are not of interest, - pcre_exec() may be called with ovector passed as NULL and - ovecsize as zero. However, if the pattern contains back - references and the ovector isn't big enough to remember the - related substrings, PCRE has to get additional memory for - use during matching. Thus it is usually advisable to supply - an ovector. - - Note that pcre_info() can be used to find out how many cap- - turing subpatterns there are in a compiled pattern. The - smallest size for ovector that will allow for n captured - substrings in addition to the offsets of the substring - matched by the whole pattern is (n+1)*3. - - If pcre_exec() fails, it returns a negative number. The fol- - lowing are defined in the header file: - - PCRE_ERROR_NOMATCH (-1) - - The subject string did not match the pattern. - - PCRE_ERROR_NULL (-2) - - Either code or subject was passed as NULL, or ovector was - NULL and ovecsize was not zero. - - PCRE_ERROR_BADOPTION (-3) - - An unrecognized bit was set in the options argument. - - PCRE_ERROR_BADMAGIC (-4) - - PCRE stores a 4-byte "magic number" at the start of the com- - piled code, to catch the case when it is passed a junk - pointer. This is the error it gives when the magic number - isn't present. - - PCRE_ERROR_UNKNOWN_NODE (-5) - - While running the pattern match, an unknown item was encoun- - tered in the compiled pattern. This error could be caused by - a bug in PCRE or by overwriting of the compiled pattern. - - PCRE_ERROR_NOMEMORY (-6) - - If a pattern contains back references, but the ovector that - is passed to pcre_exec() is not big enough to remember the - referenced substrings, PCRE gets a block of memory at the - start of matching to use for this purpose. If the call via - pcre_malloc() fails, this error is given. The memory is - freed at the end of matching. - - - -EXTRACTING CAPTURED SUBSTRINGS - Captured substrings can be accessed directly by using the - - - - - -SunOS 5.8 Last change: 12 - - - - offsets returned by pcre_exec() in ovector. For convenience, - the functions pcre_copy_substring(), pcre_get_substring(), - and pcre_get_substring_list() are provided for extracting - captured substrings as new, separate, zero-terminated - strings. A substring that contains a binary zero is - correctly extracted and has a further zero added on the end, - but the result does not, of course, function as a C string. - - The first three arguments are the same for all three func- - tions: subject is the subject string which has just been - successfully matched, ovector is a pointer to the vector of - integer offsets that was passed to pcre_exec(), and - stringcount is the number of substrings that were captured - by the match, including the substring that matched the - entire regular expression. This is the value returned by - pcre_exec if it is greater than zero. If pcre_exec() - returned zero, indicating that it ran out of space in ovec- - tor, the value passed as stringcount should be the size of - the vector divided by three. - - The functions pcre_copy_substring() and pcre_get_substring() - extract a single substring, whose number is given as string- - number. A value of zero extracts the substring that matched - the entire pattern, while higher values extract the captured - substrings. For pcre_copy_substring(), the string is placed - in buffer, whose length is given by buffersize, while for - pcre_get_substring() a new block of memory is obtained via - pcre_malloc, and its address is returned via stringptr. The - yield of the function is the length of the string, not - including the terminating zero, or one of - - PCRE_ERROR_NOMEMORY (-6) - - The buffer was too small for pcre_copy_substring(), or the - attempt to get memory failed for pcre_get_substring(). - - PCRE_ERROR_NOSUBSTRING (-7) - - There is no substring whose number is stringnumber. - - The pcre_get_substring_list() function extracts all avail- - able substrings and builds a list of pointers to them. All - this is done in a single block of memory which is obtained - via pcre_malloc. The address of the memory block is returned - via listptr, which is also the start of the list of string - pointers. The end of the list is marked by a NULL pointer. - The yield of the function is zero if all went well, or - - PCRE_ERROR_NOMEMORY (-6) - - if the attempt to get the memory block failed. - - When any of these functions encounter a substring that is - unset, which can happen when capturing subpattern number n+1 - matches some part of the subject, but subpattern n has not - been used at all, they return an empty string. This can be - distinguished from a genuine zero-length substring by - inspecting the appropriate offset in ovector, which is nega- - tive for unset substrings. - - The two convenience functions pcre_free_substring() and - pcre_free_substring_list() can be used to free the memory - returned by a previous call of pcre_get_substring() or - pcre_get_substring_list(), respectively. They do nothing - more than call the function pointed to by pcre_free, which - of course could be called directly from a C program. How- - ever, PCRE is used in some situations where it is linked via - a special interface to another programming language which - cannot use pcre_free directly; it is for these cases that - the functions are provided. - - - -LIMITATIONS - There are some size limitations in PCRE but it is hoped that - they will never in practice be relevant. The maximum length - of a compiled pattern is 65539 (sic) bytes. All values in - repeating quantifiers must be less than 65536. The maximum - number of capturing subpatterns is 99. The maximum number - of all parenthesized subpatterns, including capturing sub- - patterns, assertions, and other types of subpattern, is 200. - - The maximum length of a subject string is the largest posi- - tive number that an integer variable can hold. However, PCRE - uses recursion to handle subpatterns and indefinite repeti- - tion. This means that the available stack space may limit - the size of a subject string that can be processed by cer- - tain patterns. - - - -DIFFERENCES FROM PERL - The differences described here are with respect to Perl - 5.005. - - 1. By default, a whitespace character is any character that - the C library function isspace() recognizes, though it is - possible to compile PCRE with alternative character type - tables. Normally isspace() matches space, formfeed, newline, - carriage return, horizontal tab, and vertical tab. Perl 5 no - longer includes vertical tab in its set of whitespace char- - acters. The \v escape that was in the Perl documentation for - a long time was never in fact recognized. However, the char- - acter itself was treated as whitespace at least up to 5.002. - In 5.004 and 5.005 it does not match \s. - - 2. PCRE does not allow repeat quantifiers on lookahead - assertions. Perl permits them, but they do not mean what you - might think. For example, (?!a){3} does not assert that the - next three characters are not "a". It just asserts that the - next character is not "a" three times. - - 3. Capturing subpatterns that occur inside negative looka- - head assertions are counted, but their entries in the - offsets vector are never set. Perl sets its numerical vari- - ables from any such patterns that are matched before the - assertion fails to match something (thereby succeeding), but - only if the negative lookahead assertion contains just one - branch. - - 4. Though binary zero characters are supported in the sub- - ject string, they are not allowed in a pattern string - because it is passed as a normal C string, terminated by - zero. The escape sequence "\0" can be used in the pattern to - represent a binary zero. - - 5. The following Perl escape sequences are not supported: - \l, \u, \L, \U, \E, \Q. In fact these are implemented by - Perl's general string-handling and are not part of its pat- - tern matching engine. - - 6. The Perl \G assertion is not supported as it is not - relevant to single pattern matches. - - 7. Fairly obviously, PCRE does not support the (?{code}) and - (?p{code}) constructions. However, there is some experimen- - tal support for recursive patterns using the non-Perl item - (?R). - - 8. There are at the time of writing some oddities in Perl - 5.005_02 concerned with the settings of captured strings - when part of a pattern is repeated. For example, matching - "aba" against the pattern /^(a(b)?)+$/ sets $2 to the value - "b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves $2 - unset. However, if the pattern is changed to - /^(aa(b(b))?)+$/ then $2 (and $3) are set. - - In Perl 5.004 $2 is set in both cases, and that is also true - of PCRE. If in the future Perl changes to a consistent state - that is different, PCRE may change to follow. - - 9. Another as yet unresolved discrepancy is that in Perl - 5.005_02 the pattern /^(a)?(?(1)a|b)+$/ matches the string - "a", whereas in PCRE it does not. However, in both Perl and - PCRE /^(a)?a/ matched against "a" leaves $1 unset. - - 10. PCRE provides some extensions to the Perl regular - expression facilities: - - (a) Although lookbehind assertions must match fixed length - strings, each alternative branch of a lookbehind assertion - can match a different length of string. Perl 5.005 requires - them all to have the same length. - - (b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not - set, the $ meta- character matches only at the very end of - the string. - - (c) If PCRE_EXTRA is set, a backslash followed by a letter - with no special meaning is faulted. - - (d) If PCRE_UNGREEDY is set, the greediness of the repeti- - tion quantifiers is inverted, that is, by default they are - not greedy, but if followed by a question mark they are. - - (e) PCRE_ANCHORED can be used to force a pattern to be tried - only at the start of the subject. - - (f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options - for pcre_exec() have no Perl equivalents. - - (g) The (?R) construct allows for recursive pattern matching - (Perl 5.6 can do this using the (?p{code}) construct, which - PCRE cannot of course support.) - - - -REGULAR EXPRESSION DETAILS - The syntax and semantics of the regular expressions sup- - ported by PCRE are described below. Regular expressions are - also described in the Perl documentation and in a number of - other books, some of which have copious examples. Jeffrey - Friedl's "Mastering Regular Expressions", published by - O'Reilly (ISBN 1-56592-257), covers them in great detail. - - The description here is intended as reference documentation. - The basic operation of PCRE is on strings of bytes. However, - there is the beginnings of some support for UTF-8 character - strings. To use this support you must configure PCRE to - include it, and then call pcre_compile() with the PCRE_UTF8 - option. How this affects the pattern matching is described - in the final section of this document. - - A regular expression is a pattern that is matched against a - subject string from left to right. Most characters stand for - themselves in a pattern, and match the corresponding charac- - ters in the subject. As a trivial example, the pattern - - The quick brown fox - - matches a portion of a subject string that is identical to - itself. The power of regular expressions comes from the - ability to include alternatives and repetitions in the pat- - tern. These are encoded in the pattern by the use of meta- - characters, which do not stand for themselves but instead - are interpreted in some special way. - - There are two different sets of meta-characters: those that - are recognized anywhere in the pattern except within square - brackets, and those that are recognized in square brackets. - Outside square brackets, the meta-characters are as follows: - - \ general escape character with several uses - ^ assert start of subject (or line, in multiline - mode) - $ assert end of subject (or line, in multiline mode) - . match any character except newline (by default) - [ start character class definition - | start of alternative branch - ( start subpattern - ) end subpattern - ? extends the meaning of ( - also 0 or 1 quantifier - also quantifier minimizer - * 0 or more quantifier - + 1 or more quantifier - { start min/max quantifier - - Part of a pattern that is in square brackets is called a - "character class". In a character class the only meta- - characters are: - - \ general escape character - ^ negate the class, but only if the first character - - indicates character range - ] terminates the character class - - The following sections describe the use of each of the - meta-characters. - - - -BACKSLASH - The backslash character has several uses. Firstly, if it is - followed by a non-alphameric character, it takes away any - special meaning that character may have. This use of - backslash as an escape character applies both inside and - outside character classes. - - For example, if you want to match a "*" character, you write - "\*" in the pattern. This applies whether or not the follow- - ing character would otherwise be interpreted as a meta- - character, so it is always safe to precede a non-alphameric - with "\" to specify that it stands for itself. In particu- - lar, if you want to match a backslash, you write "\\". - - If a pattern is compiled with the PCRE_EXTENDED option, whi- - tespace in the pattern (other than in a character class) and - characters between a "#" outside a character class and the - next newline character are ignored. An escaping backslash - can be used to include a whitespace or "#" character as part - of the pattern. - - A second use of backslash provides a way of encoding non- - printing characters in patterns in a visible manner. There - is no restriction on the appearance of non-printing charac- - ters, apart from the binary zero that terminates a pattern, - but when a pattern is being prepared by text editing, it is - usually easier to use one of the following escape sequences - than the binary character it represents: - - \a alarm, that is, the BEL character (hex 07) - \cx "control-x", where x is any character - \e escape (hex 1B) - \f formfeed (hex 0C) - \n newline (hex 0A) - \r carriage return (hex 0D) - \t tab (hex 09) - \xhh character with hex code hh - \ddd character with octal code ddd, or backreference - - The precise effect of "\cx" is as follows: if "x" is a lower - case letter, it is converted to upper case. Then bit 6 of - the character (hex 40) is inverted. Thus "\cz" becomes hex - 1A, but "\c{" becomes hex 3B, while "\c;" becomes hex 7B. - - After "\x", up to two hexadecimal digits are read (letters - can be in upper or lower case). - - After "\0" up to two further octal digits are read. In both - cases, if there are fewer than two digits, just those that - are present are used. Thus the sequence "\0\x\07" specifies - two binary zeros followed by a BEL character. Make sure you - supply two digits after the initial zero if the character - that follows is itself an octal digit. - - The handling of a backslash followed by a digit other than 0 - is complicated. Outside a character class, PCRE reads it - and any following digits as a decimal number. If the number - is less than 10, or if there have been at least that many - previous capturing left parentheses in the expression, the - entire sequence is taken as a back reference. A description - of how this works is given later, following the discussion - of parenthesized subpatterns. - - Inside a character class, or if the decimal number is - greater than 9 and there have not been that many capturing - subpatterns, PCRE re-reads up to three octal digits follow- - ing the backslash, and generates a single byte from the - least significant 8 bits of the value. Any subsequent digits - stand for themselves. For example: - - \040 is another way of writing a space - \40 is the same, provided there are fewer than 40 - previous capturing subpatterns - \7 is always a back reference - \11 might be a back reference, or another way of - writing a tab - \011 is always a tab - \0113 is a tab followed by the character "3" - \113 is the character with octal code 113 (since there - can be no more than 99 back references) - \377 is a byte consisting entirely of 1 bits - \81 is either a back reference, or a binary zero - followed by the two characters "8" and "1" - - Note that octal values of 100 or greater must not be intro- - duced by a leading zero, because no more than three octal - digits are ever read. - - All the sequences that define a single byte value can be - used both inside and outside character classes. In addition, - inside a character class, the sequence "\b" is interpreted - as the backspace character (hex 08). Outside a character - class it has a different meaning (see below). - - The third use of backslash is for specifying generic charac- - ter types: - - \d any decimal digit - \D any character that is not a decimal digit - \s any whitespace character - \S any character that is not a whitespace character - \w any "word" character - \W any "non-word" character - - Each pair of escape sequences partitions the complete set of - characters into two disjoint sets. Any given character - matches one, and only one, of each pair. - - A "word" character is any letter or digit or the underscore - character, that is, any character which can be part of a - Perl "word". The definition of letters and digits is con- - trolled by PCRE's character tables, and may vary if locale- - specific matching is taking place (see "Locale support" - above). For example, in the "fr" (French) locale, some char- - acter codes greater than 128 are used for accented letters, - and these are matched by \w. - - These character type sequences can appear both inside and - outside character classes. They each match one character of - the appropriate type. If the current matching point is at - the end of the subject string, all of them fail, since there - is no character to match. - - The fourth use of backslash is for certain simple asser- - tions. An assertion specifies a condition that has to be met - at a particular point in a match, without consuming any - characters from the subject string. The use of subpatterns - for more complicated assertions is described below. The - backslashed assertions are - - \b word boundary - \B not a word boundary - \A start of subject (independent of multiline mode) - \Z end of subject or newline at end (independent of - multiline mode) - \z end of subject (independent of multiline mode) - - These assertions may not appear in character classes (but - note that "\b" has a different meaning, namely the backspace - character, inside a character class). - - A word boundary is a position in the subject string where - the current character and the previous character do not both - match \w or \W (i.e. one matches \w and the other matches - \W), or the start or end of the string if the first or last - character matches \w, respectively. - - The \A, \Z, and \z assertions differ from the traditional - circumflex and dollar (described below) in that they only - ever match at the very start and end of the subject string, - whatever options are set. They are not affected by the - PCRE_NOTBOL or PCRE_NOTEOL options. If the startoffset argu- - ment of pcre_exec() is non-zero, \A can never match. The - difference between \Z and \z is that \Z matches before a - newline that is the last character of the string as well as - at the end of the string, whereas \z matches only at the - end. - - - -CIRCUMFLEX AND DOLLAR - Outside a character class, in the default matching mode, the - circumflex character is an assertion which is true only if - the current matching point is at the start of the subject - - string. If the startoffset argument of pcre_exec() is non- - zero, circumflex can never match. Inside a character class, - circumflex has an entirely different meaning (see below). - - Circumflex need not be the first character of the pattern if - a number of alternatives are involved, but it should be the - first thing in each alternative in which it appears if the - pattern is ever to match that branch. If all possible alter- - natives start with a circumflex, that is, if the pattern is - constrained to match only at the start of the subject, it is - said to be an "anchored" pattern. (There are also other con- - structs that can cause a pattern to be anchored.) - - A dollar character is an assertion which is true only if the - current matching point is at the end of the subject string, - or immediately before a newline character that is the last - character in the string (by default). Dollar need not be the - last character of the pattern if a number of alternatives - are involved, but it should be the last item in any branch - in which it appears. Dollar has no special meaning in a - character class. - - The meaning of dollar can be changed so that it matches only - at the very end of the string, by setting the - PCRE_DOLLAR_ENDONLY option at compile or matching time. This - does not affect the \Z assertion. - - The meanings of the circumflex and dollar characters are - changed if the PCRE_MULTILINE option is set. When this is - the case, they match immediately after and immediately - before an internal "\n" character, respectively, in addition - to matching at the start and end of the subject string. For - example, the pattern /^abc$/ matches the subject string - "def\nabc" in multiline mode, but not otherwise. Conse- - quently, patterns that are anchored in single line mode - because all branches start with "^" are not anchored in mul- - tiline mode, and a match for circumflex is possible when the - startoffset argument of pcre_exec() is non-zero. The - PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is - set. - - Note that the sequences \A, \Z, and \z can be used to match - the start and end of the subject in both modes, and if all - branches of a pattern start with \A is it always anchored, - whether PCRE_MULTILINE is set or not. - - - -FULL STOP (PERIOD, DOT) - Outside a character class, a dot in the pattern matches any - one character in the subject, including a non-printing char- - acter, but not (by default) newline. If the PCRE_DOTALL - - option is set, dots match newlines as well. The handling of - dot is entirely independent of the handling of circumflex - and dollar, the only relationship being that they both - involve newline characters. Dot has no special meaning in a - character class. - - - -SQUARE BRACKETS - An opening square bracket introduces a character class, ter- - minated by a closing square bracket. A closing square - bracket on its own is not special. If a closing square - bracket is required as a member of the class, it should be - the first data character in the class (after an initial cir- - cumflex, if present) or escaped with a backslash. - - A character class matches a single character in the subject; - the character must be in the set of characters defined by - the class, unless the first character in the class is a cir- - cumflex, in which case the subject character must not be in - the set defined by the class. If a circumflex is actually - required as a member of the class, ensure it is not the - first character, or escape it with a backslash. - - For example, the character class [aeiou] matches any lower - case vowel, while [^aeiou] matches any character that is not - a lower case vowel. Note that a circumflex is just a con- - venient notation for specifying the characters which are in - the class by enumerating those that are not. It is not an - assertion: it still consumes a character from the subject - string, and fails if the current pointer is at the end of - the string. - - When caseless matching is set, any letters in a class - represent both their upper case and lower case versions, so - for example, a caseless [aeiou] matches "A" as well as "a", - and a caseless [^aeiou] does not match "A", whereas a case- - ful version would. - - The newline character is never treated in any special way in - character classes, whatever the setting of the PCRE_DOTALL - or PCRE_MULTILINE options is. A class such as [^a] will - always match a newline. - - The minus (hyphen) character can be used to specify a range - of characters in a character class. For example, [d-m] - matches any letter between d and m, inclusive. If a minus - character is required in a class, it must be escaped with a - backslash or appear in a position where it cannot be inter- - preted as indicating a range, typically as the first or last - character in the class. - - It is not possible to have the literal character "]" as the - end character of a range. A pattern such as [W-]46] is - interpreted as a class of two characters ("W" and "-") fol- - lowed by a literal string "46]", so it would match "W46]" or - "-46]". However, if the "]" is escaped with a backslash it - is interpreted as the end of range, so [W-\]46] is inter- - preted as a single class containing a range followed by two - separate characters. The octal or hexadecimal representation - of "]" can also be used to end a range. - - Ranges operate in ASCII collating sequence. They can also be - used for characters specified numerically, for example - [\000-\037]. If a range that includes letters is used when - caseless matching is set, it matches the letters in either - case. For example, [W-c] is equivalent to [][\^_`wxyzabc], - matched caselessly, and if character tables for the "fr" - locale are in use, [\xc8-\xcb] matches accented E characters - in both cases. - - The character types \d, \D, \s, \S, \w, and \W may also - appear in a character class, and add the characters that - they match to the class. For example, [\dABCDEF] matches any - hexadecimal digit. A circumflex can conveniently be used - with the upper case character types to specify a more res- - tricted set of characters than the matching lower case type. - For example, the class [^\W_] matches any letter or digit, - but not underscore. - - All non-alphameric characters other than \, -, ^ (at the - start) and the terminating ] are non-special in character - classes, but it does no harm if they are escaped. - - - -POSIX CHARACTER CLASSES - Perl 5.6 (not yet released at the time of writing) is going - to support the POSIX notation for character classes, which - uses names enclosed by [: and :] within the enclosing - square brackets. PCRE supports this notation. For example, - - [01[:alpha:]%] - - matches "0", "1", any alphabetic character, or "%". The sup- - ported class names are - - alnum letters and digits - alpha letters - ascii character codes 0 - 127 - cntrl control characters - digit decimal digits (same as \d) - graph printing characters, excluding space - lower lower case letters - print printing characters, including space - punct printing characters, excluding letters and digits - space white space (same as \s) - upper upper case letters - word "word" characters (same as \w) - xdigit hexadecimal digits - - The names "ascii" and "word" are Perl extensions. Another - Perl extension is negation, which is indicated by a ^ char- - acter after the colon. For example, - - [12[:^digit:]] - - matches "1", "2", or any non-digit. PCRE (and Perl) also - recogize the POSIX syntax [.ch.] and [=ch=] where "ch" is a - "collating element", but these are not supported, and an - error is given if they are encountered. - - - -VERTICAL BAR - Vertical bar characters are used to separate alternative - patterns. For example, the pattern - - gilbert|sullivan - - matches either "gilbert" or "sullivan". Any number of alter- - natives may appear, and an empty alternative is permitted - (matching the empty string). The matching process tries - each alternative in turn, from left to right, and the first - one that succeeds is used. If the alternatives are within a - subpattern (defined below), "succeeds" means matching the - rest of the main pattern as well as the alternative in the - subpattern. - - - -INTERNAL OPTION SETTING - The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, - and PCRE_EXTENDED can be changed from within the pattern by - a sequence of Perl option letters enclosed between "(?" and - ")". The option letters are - - i for PCRE_CASELESS - m for PCRE_MULTILINE - s for PCRE_DOTALL - x for PCRE_EXTENDED - - For example, (?im) sets caseless, multiline matching. It is - also possible to unset these options by preceding the letter - with a hyphen, and a combined setting and unsetting such as - (?im-sx), which sets PCRE_CASELESS and PCRE_MULTILINE while - unsetting PCRE_DOTALL and PCRE_EXTENDED, is also permitted. - If a letter appears both before and after the hyphen, the - option is unset. - - The scope of these option changes depends on where in the - pattern the setting occurs. For settings that are outside - any subpattern (defined below), the effect is the same as if - the options were set or unset at the start of matching. The - following patterns all behave in exactly the same way: - - (?i)abc - a(?i)bc - ab(?i)c - abc(?i) - - which in turn is the same as compiling the pattern abc with - PCRE_CASELESS set. In other words, such "top level" set- - tings apply to the whole pattern (unless there are other - changes inside subpatterns). If there is more than one set- - ting of the same option at top level, the rightmost setting - is used. - - If an option change occurs inside a subpattern, the effect - is different. This is a change of behaviour in Perl 5.005. - An option change inside a subpattern affects only that part - of the subpattern that follows it, so - - (a(?i)b)c - - matches abc and aBc and no other strings (assuming - PCRE_CASELESS is not used). By this means, options can be - made to have different settings in different parts of the - pattern. Any changes made in one alternative do carry on - into subsequent branches within the same subpattern. For - example, - - (a(?i)b|c) - - matches "ab", "aB", "c", and "C", even though when matching - "C" the first branch is abandoned before the option setting. - This is because the effects of option settings happen at - compile time. There would be some very weird behaviour oth- - erwise. - - The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can - be changed in the same way as the Perl-compatible options by - using the characters U and X respectively. The (?X) flag - setting is special in that it must always occur earlier in - the pattern than any of the additional features it turns on, - even when it is at top level. It is best put at the start. - - - -SUBPATTERNS - Subpatterns are delimited by parentheses (round brackets), - which can be nested. Marking part of a pattern as a subpat- - tern does two things: - - 1. It localizes a set of alternatives. For example, the pat- - tern - - cat(aract|erpillar|) - - matches one of the words "cat", "cataract", or "caterpil- - lar". Without the parentheses, it would match "cataract", - "erpillar" or the empty string. - - 2. It sets up the subpattern as a capturing subpattern (as - defined above). When the whole pattern matches, that por- - tion of the subject string that matched the subpattern is - passed back to the caller via the ovector argument of - pcre_exec(). Opening parentheses are counted from left to - right (starting from 1) to obtain the numbers of the captur- - ing subpatterns. - - For example, if the string "the red king" is matched against - the pattern - - the ((red|white) (king|queen)) - - the captured substrings are "red king", "red", and "king", - and are numbered 1, 2, and 3. - - The fact that plain parentheses fulfil two functions is not - always helpful. There are often times when a grouping sub- - pattern is required without a capturing requirement. If an - opening parenthesis is followed by "?:", the subpattern does - not do any capturing, and is not counted when computing the - number of any subsequent capturing subpatterns. For example, - if the string "the white queen" is matched against the pat- - tern - - the ((?:red|white) (king|queen)) - - the captured substrings are "white queen" and "queen", and - are numbered 1 and 2. The maximum number of captured sub- - strings is 99, and the maximum number of all subpatterns, - both capturing and non-capturing, is 200. - - As a convenient shorthand, if any option settings are - required at the start of a non-capturing subpattern, the - option letters may appear between the "?" and the ":". Thus - the two patterns - - (?i:saturday|sunday) - (?:(?i)saturday|sunday) - - match exactly the same set of strings. Because alternative - branches are tried from left to right, and options are not - reset until the end of the subpattern is reached, an option - setting in one branch does affect subsequent branches, so - the above patterns match "SUNDAY" as well as "Saturday". - - - -REPETITION - Repetition is specified by quantifiers, which can follow any - of the following items: - - a single character, possibly escaped - the . metacharacter - a character class - a back reference (see next section) - a parenthesized subpattern (unless it is an assertion - - see below) - - The general repetition quantifier specifies a minimum and - maximum number of permitted matches, by giving the two - numbers in curly brackets (braces), separated by a comma. - The numbers must be less than 65536, and the first must be - less than or equal to the second. For example: - - z{2,4} - - matches "zz", "zzz", or "zzzz". A closing brace on its own - is not a special character. If the second number is omitted, - but the comma is present, there is no upper limit; if the - second number and the comma are both omitted, the quantifier - specifies an exact number of required matches. Thus - - [aeiou]{3,} - - matches at least 3 successive vowels, but may match many - more, while - - \d{8} - - matches exactly 8 digits. An opening curly bracket that - appears in a position where a quantifier is not allowed, or - one that does not match the syntax of a quantifier, is taken - as a literal character. For example, {,6} is not a quantif- - ier, but a literal string of four characters. - - The quantifier {0} is permitted, causing the expression to - behave as if the previous item and the quantifier were not - present. - - For convenience (and historical compatibility) the three - most common quantifiers have single-character abbreviations: - - * is equivalent to {0,} - + is equivalent to {1,} - ? is equivalent to {0,1} - - It is possible to construct infinite loops by following a - subpattern that can match no characters with a quantifier - that has no upper limit, for example: - - (a?)* - - Earlier versions of Perl and PCRE used to give an error at - compile time for such patterns. However, because there are - cases where this can be useful, such patterns are now - accepted, but if any repetition of the subpattern does in - fact match no characters, the loop is forcibly broken. - - By default, the quantifiers are "greedy", that is, they - match as much as possible (up to the maximum number of per- - mitted times), without causing the rest of the pattern to - fail. The classic example of where this gives problems is in - trying to match comments in C programs. These appear between - the sequences /* and */ and within the sequence, individual - * and / characters may appear. An attempt to match C com- - ments by applying the pattern - - /\*.*\*/ - - to the string - - /* first command */ not comment /* second comment */ - - fails, because it matches the entire string owing to the - greediness of the .* item. - - However, if a quantifier is followed by a question mark, it - ceases to be greedy, and instead matches the minimum number - of times possible, so the pattern - - /\*.*?\*/ - - does the right thing with the C comments. The meaning of the - various quantifiers is not otherwise changed, just the pre- - ferred number of matches. Do not confuse this use of ques- - tion mark with its use as a quantifier in its own right. - Because it has two uses, it can sometimes appear doubled, as - in - - \d??\d - - which matches one digit by preference, but can match two if - that is the only way the rest of the pattern matches. - - If the PCRE_UNGREEDY option is set (an option which is not - available in Perl), the quantifiers are not greedy by - default, but individual ones can be made greedy by following - them with a question mark. In other words, it inverts the - default behaviour. - - When a parenthesized subpattern is quantified with a minimum - repeat count that is greater than 1 or with a limited max- - imum, more store is required for the compiled pattern, in - proportion to the size of the minimum or maximum. - - If a pattern starts with .* or .{0,} and the PCRE_DOTALL - option (equivalent to Perl's /s) is set, thus allowing the . - to match newlines, the pattern is implicitly anchored, - because whatever follows will be tried against every charac- - ter position in the subject string, so there is no point in - retrying the overall match at any position after the first. - PCRE treats such a pattern as though it were preceded by \A. - In cases where it is known that the subject string contains - no newlines, it is worth setting PCRE_DOTALL when the pat- - tern begins with .* in order to obtain this optimization, or - alternatively using ^ to indicate anchoring explicitly. - - When a capturing subpattern is repeated, the value captured - is the substring that matched the final iteration. For exam- - ple, after - - (tweedle[dume]{3}\s*)+ - - has matched "tweedledum tweedledee" the value of the cap- - tured substring is "tweedledee". However, if there are - nested capturing subpatterns, the corresponding captured - values may have been set in previous iterations. For exam- - ple, after - - /(a|(b))+/ - - matches "aba" the value of the second captured substring is - "b". - - - -BACK REFERENCES - Outside a character class, a backslash followed by a digit - greater than 0 (and possibly further digits) is a back - reference to a capturing subpattern earlier (i.e. to its - left) in the pattern, provided there have been that many - previous capturing left parentheses. - - However, if the decimal number following the backslash is - less than 10, it is always taken as a back reference, and - causes an error only if there are not that many capturing - left parentheses in the entire pattern. In other words, the - parentheses that are referenced need not be to the left of - the reference for numbers less than 10. See the section - entitled "Backslash" above for further details of the han- - dling of digits following a backslash. - - A back reference matches whatever actually matched the cap- - turing subpattern in the current subject string, rather than - anything matching the subpattern itself. So the pattern - - (sens|respons)e and \1ibility - - matches "sense and sensibility" and "response and responsi- - bility", but not "sense and responsibility". If caseful - matching is in force at the time of the back reference, the - case of letters is relevant. For example, - - ((?i)rah)\s+\1 - - matches "rah rah" and "RAH RAH", but not "RAH rah", even - though the original capturing subpattern is matched case- - lessly. - - There may be more than one back reference to the same sub- - pattern. If a subpattern has not actually been used in a - particular match, any back references to it always fail. For - example, the pattern - - (a|(bc))\2 - - always fails if it starts to match "a" rather than "bc". - Because there may be up to 99 back references, all digits - following the backslash are taken as part of a potential - back reference number. If the pattern continues with a digit - character, some delimiter must be used to terminate the back - reference. If the PCRE_EXTENDED option is set, this can be - whitespace. Otherwise an empty comment can be used. - - A back reference that occurs inside the parentheses to which - it refers fails when the subpattern is first used, so, for - example, (a\1) never matches. However, such references can - be useful inside repeated subpatterns. For example, the pat- - tern - - (a|b\1)+ - - matches any number of "a"s and also "aba", "ababbaa" etc. At - each iteration of the subpattern, the back reference matches - the character string corresponding to the previous - iteration. In order for this to work, the pattern must be - such that the first iteration does not need to match the - back reference. This can be done using alternation, as in - the example above, or by a quantifier with a minimum of - zero. - - - -ASSERTIONS - An assertion is a test on the characters following or - preceding the current matching point that does not actually - consume any characters. The simple assertions coded as \b, - \B, \A, \Z, \z, ^ and $ are described above. More compli- - cated assertions are coded as subpatterns. There are two - kinds: those that look ahead of the current position in the - subject string, and those that look behind it. - - An assertion subpattern is matched in the normal way, except - that it does not cause the current matching position to be - changed. Lookahead assertions start with (?= for positive - assertions and (?! for negative assertions. For example, - - \w+(?=;) - - matches a word followed by a semicolon, but does not include - the semicolon in the match, and - - foo(?!bar) - - matches any occurrence of "foo" that is not followed by - "bar". Note that the apparently similar pattern - - (?!foo)bar - - does not find an occurrence of "bar" that is preceded by - something other than "foo"; it finds any occurrence of "bar" - whatsoever, because the assertion (?!foo) is always true - when the next three characters are "bar". A lookbehind - assertion is needed to achieve this effect. - - Lookbehind assertions start with (?<= for positive asser- - tions and (?<! for negative assertions. For example, - - (?<!foo)bar - - does find an occurrence of "bar" that is not preceded by - "foo". The contents of a lookbehind assertion are restricted - such that all the strings it matches must have a fixed - length. However, if there are several alternatives, they do - not all have to have the same fixed length. Thus - - (?<=bullock|donkey) - - is permitted, but - - (?<!dogs?|cats?) - - causes an error at compile time. Branches that match dif- - ferent length strings are permitted only at the top level of - a lookbehind assertion. This is an extension compared with - Perl 5.005, which requires all branches to match the same - length of string. An assertion such as - - (?<=ab(c|de)) - - is not permitted, because its single top-level branch can - match two different lengths, but it is acceptable if rewrit- - ten to use two top-level branches: - - (?<=abc|abde) - - The implementation of lookbehind assertions is, for each - alternative, to temporarily move the current position back - by the fixed width and then try to match. If there are - insufficient characters before the current position, the - match is deemed to fail. Lookbehinds in conjunction with - once-only subpatterns can be particularly useful for match- - ing at the ends of strings; an example is given at the end - of the section on once-only subpatterns. - - Several assertions (of any sort) may occur in succession. - For example, - - (?<=\d{3})(?<!999)foo - - matches "foo" preceded by three digits that are not "999". - Notice that each of the assertions is applied independently - at the same point in the subject string. First there is a - check that the previous three characters are all digits, and - then there is a check that the same three characters are not - "999". This pattern does not match "foo" preceded by six - characters, the first of which are digits and the last three - of which are not "999". For example, it doesn't match - "123abcfoo". A pattern to do that is - - (?<=\d{3}...)(?<!999)foo - - This time the first assertion looks at the preceding six - characters, checking that the first three are digits, and - then the second assertion checks that the preceding three - characters are not "999". - - Assertions can be nested in any combination. For example, - - (?<=(?<!foo)bar)baz - - matches an occurrence of "baz" that is preceded by "bar" - which in turn is not preceded by "foo", while - - (?<=\d{3}(?!999)...)foo - - is another pattern which matches "foo" preceded by three - digits and any three characters that are not "999". - - Assertion subpatterns are not capturing subpatterns, and may - not be repeated, because it makes no sense to assert the - same thing several times. If any kind of assertion contains - capturing subpatterns within it, these are counted for the - purposes of numbering the capturing subpatterns in the whole - pattern. However, substring capturing is carried out only - for positive assertions, because it does not make sense for - negative assertions. - - Assertions count towards the maximum of 200 parenthesized - subpatterns. - - - -ONCE-ONLY SUBPATTERNS - With both maximizing and minimizing repetition, failure of - what follows normally causes the repeated item to be re- - evaluated to see if a different number of repeats allows the - rest of the pattern to match. Sometimes it is useful to - prevent this, either to change the nature of the match, or - to cause it fail earlier than it otherwise might, when the - author of the pattern knows there is no point in carrying - on. - - Consider, for example, the pattern \d+foo when applied to - the subject line - - 123456bar - - After matching all 6 digits and then failing to match "foo", - the normal action of the matcher is to try again with only 5 - digits matching the \d+ item, and then with 4, and so on, - before ultimately failing. Once-only subpatterns provide the - means for specifying that once a portion of the pattern has - matched, it is not to be re-evaluated in this way, so the - matcher would give up immediately on failing to match "foo" - the first time. The notation is another kind of special - parenthesis, starting with (?> as in this example: - - (?>\d+)bar - - This kind of parenthesis "locks up" the part of the pattern - it contains once it has matched, and a failure further into - the pattern is prevented from backtracking into it. - Backtracking past it to previous items, however, works as - normal. - - An alternative description is that a subpattern of this type - matches the string of characters that an identical stan- - dalone pattern would match, if anchored at the current point - in the subject string. - - Once-only subpatterns are not capturing subpatterns. Simple - cases such as the above example can be thought of as a max- - imizing repeat that must swallow everything it can. So, - while both \d+ and \d+? are prepared to adjust the number of - digits they match in order to make the rest of the pattern - match, (?>\d+) can only match an entire sequence of digits. - - This construction can of course contain arbitrarily compli- - cated subpatterns, and it can be nested. - - Once-only subpatterns can be used in conjunction with look- - behind assertions to specify efficient matching at the end - of the subject string. Consider a simple pattern such as - - abcd$ - - when applied to a long string which does not match. Because - matching proceeds from left to right, PCRE will look for - each "a" in the subject and then see if what follows matches - the rest of the pattern. If the pattern is specified as - - ^.*abcd$ - - the initial .* matches the entire string at first, but when - this fails (because there is no following "a"), it back- - tracks to match all but the last character, then all but the - last two characters, and so on. Once again the search for - "a" covers the entire string, from right to left, so we are - no better off. However, if the pattern is written as - - ^(?>.*)(?<=abcd) - - there can be no backtracking for the .* item; it can match - only the entire string. The subsequent lookbehind assertion - does a single test on the last four characters. If it fails, - the match fails immediately. For long strings, this approach - makes a significant difference to the processing time. - - When a pattern contains an unlimited repeat inside a subpat- - tern that can itself be repeated an unlimited number of - times, the use of a once-only subpattern is the only way to - avoid some failing matches taking a very long time indeed. - The pattern - - (\D+|<\d+>)*[!?] - - matches an unlimited number of substrings that either con- - sist of non-digits, or digits enclosed in <>, followed by - either ! or ?. When it matches, it runs quickly. However, if - it is applied to - - aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa - - it takes a long time before reporting failure. This is - because the string can be divided between the two repeats in - a large number of ways, and all have to be tried. (The exam- - ple used [!?] rather than a single character at the end, - because both PCRE and Perl have an optimization that allows - for fast failure when a single character is used. They - remember the last single character that is required for a - match, and fail early if it is not present in the string.) - If the pattern is changed to - - ((?>\D+)|<\d+>)*[!?] - - sequences of non-digits cannot be broken, and failure hap- - pens quickly. - - - -CONDITIONAL SUBPATTERNS - It is possible to cause the matching process to obey a sub- - pattern conditionally or to choose between two alternative - subpatterns, depending on the result of an assertion, or - whether a previous capturing subpattern matched or not. The - two possible forms of conditional subpattern are - - (?(condition)yes-pattern) - (?(condition)yes-pattern|no-pattern) - - If the condition is satisfied, the yes-pattern is used; oth- - erwise the no-pattern (if present) is used. If there are - more than two alternatives in the subpattern, a compile-time - error occurs. - - There are two kinds of condition. If the text between the - parentheses consists of a sequence of digits, the condition - is satisfied if the capturing subpattern of that number has - previously matched. The number must be greater than zero. - Consider the following pattern, which contains non- - significant white space to make it more readable (assume the - PCRE_EXTENDED option) and to divide it into three parts for - ease of discussion: - - ( $ )? [^()]+ (?(1) $ ) - - The first part matches an optional opening parenthesis, and - if that character is present, sets it as the first captured - substring. The second part matches one or more characters - that are not parentheses. The third part is a conditional - subpattern that tests whether the first set of parentheses - matched or not. If they did, that is, if subject started - with an opening parenthesis, the condition is true, and so - the yes-pattern is executed and a closing parenthesis is - required. Otherwise, since no-pattern is not present, the - subpattern matches nothing. In other words, this pattern - matches a sequence of non-parentheses, optionally enclosed - in parentheses. - - If the condition is not a sequence of digits, it must be an - assertion. This may be a positive or negative lookahead or - lookbehind assertion. Consider this pattern, again contain- - ing non-significant white space, and with the two alterna- - tives on the second line: - - (?(?=[^a-z]*[a-z]) - \d{2}-[a-z]{3}-\d{2} | \d{2}-\d{2}-\d{2} ) - - The condition is a positive lookahead assertion that matches - an optional sequence of non-letters followed by a letter. In - other words, it tests for the presence of at least one - letter in the subject. If a letter is found, the subject is - matched against the first alternative; otherwise it is - matched against the second. This pattern matches strings in - one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are - letters and dd are digits. - - - -COMMENTS - The sequence (?# marks the start of a comment which contin- - ues up to the next closing parenthesis. Nested parentheses - are not permitted. The characters that make up a comment - play no part in the pattern matching at all. - - If the PCRE_EXTENDED option is set, an unescaped # character - outside a character class introduces a comment that contin- - ues up to the next newline character in the pattern. - - - -RECURSIVE PATTERNS - Consider the problem of matching a string in parentheses, - allowing for unlimited nested parentheses. Without the use - of recursion, the best that can be done is to use a pattern - that matches up to some fixed depth of nesting. It is not - possible to handle an arbitrary nesting depth. Perl 5.6 has - provided an experimental facility that allows regular - expressions to recurse (amongst other things). It does this - by interpolating Perl code in the expression at run time, - and the code can refer to the expression itself. A Perl pat- - tern to solve the parentheses problem can be created like - this: - - $re = qr{$ (?: (?>[^()]+) | (?p{$re}) )* $}x; - - The (?p{...}) item interpolates Perl code at run time, and - in this case refers recursively to the pattern in which it - appears. Obviously, PCRE cannot support the interpolation of - Perl code. Instead, the special item (?R) is provided for - the specific case of recursion. This PCRE pattern solves the - parentheses problem (assume the PCRE_EXTENDED option is set - so that white space is ignored): - - $ ( (?>[^()]+) | (?R) )* $ - - First it matches an opening parenthesis. Then it matches any - number of substrings which can either be a sequence of non- - parentheses, or a recursive match of the pattern itself - (i.e. a correctly parenthesized substring). Finally there is - a closing parenthesis. - - This particular example pattern contains nested unlimited - repeats, and so the use of a once-only subpattern for match- - ing strings of non-parentheses is important when applying - the pattern to strings that do not match. For example, when - it is applied to - - (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa() - - it yields "no match" quickly. However, if a once-only sub- - pattern is not used, the match runs for a very long time - indeed because there are so many different ways the + and * - repeats can carve up the subject, and all have to be tested - before failure can be reported. - - The values set for any capturing subpatterns are those from - the outermost level of the recursion at which the subpattern - value is set. If the pattern above is matched against - - (ab(cd)ef) - - the value for the capturing parentheses is "ef", which is - the last value taken on at the top level. If additional - parentheses are added, giving - - $ ( ( (?>[^()]+) | (?R) )* ) $ - ^ ^ - ^ ^ the string they capture is - "ab(cd)ef", the contents of the top level parentheses. If - there are more than 15 capturing parentheses in a pattern, - PCRE has to obtain extra memory to store data during a - recursion, which it does by using pcre_malloc, freeing it - via pcre_free afterwards. If no memory can be obtained, it - saves data for the first 15 capturing parentheses only, as - there is no way to give an out-of-memory error from within a - recursion. - - - -PERFORMANCE - Certain items that may appear in patterns are more efficient - than others. It is more efficient to use a character class - like [aeiou] than a set of alternatives such as (a|e|i|o|u). - In general, the simplest construction that provides the - required behaviour is usually the most efficient. Jeffrey - Friedl's book contains a lot of discussion about optimizing - regular expressions for efficient performance. - - When a pattern begins with .* and the PCRE_DOTALL option is - set, the pattern is implicitly anchored by PCRE, since it - can match only at the start of a subject string. However, if - PCRE_DOTALL is not set, PCRE cannot make this optimization, - because the . metacharacter does not then match a newline, - and if the subject string contains newlines, the pattern may - match from the character immediately following one of them - instead of from the very start. For example, the pattern - - (.*) second - - matches the subject "first\nand second" (where \n stands for - a newline character) with the first captured substring being - "and". In order to do this, PCRE has to retry the match - starting after every newline in the subject. - - If you are using such a pattern with subject strings that do - not contain newlines, the best performance is obtained by - setting PCRE_DOTALL, or starting the pattern with ^.* to - indicate explicit anchoring. That saves PCRE from having to - scan along the subject looking for a newline to restart at. - - Beware of patterns that contain nested indefinite repeats. - These can take a long time to run when applied to a string - that does not match. Consider the pattern fragment - - (a+)* - - This can match "aaaa" in 33 different ways, and this number - increases very rapidly as the string gets longer. (The * - repeat can match 0, 1, 2, 3, or 4 times, and for each of - those cases other than 0, the + repeats can match different - numbers of times.) When the remainder of the pattern is such - that the entire match is going to fail, PCRE has in princi- - ple to try every possible variation, and this can take an - extremely long time. - - An optimization catches some of the more simple cases such - as - - (a+)*b - - where a literal character follows. Before embarking on the - standard matching procedure, PCRE checks that there is a "b" - later in the subject string, and if there is not, it fails - the match immediately. However, when there is no following - literal this optimization cannot be used. You can see the - difference by comparing the behaviour of - - (a+)*\d - - with the pattern above. The former gives a failure almost - instantly when applied to a whole line of "a" characters, - whereas the latter takes an appreciable time with strings - longer than about 20 characters. - - - -UTF-8 SUPPORT - Starting at release 3.3, PCRE has some support for character - strings encoded in the UTF-8 format. This is incomplete, and - is regarded as experimental. In order to use it, you must - configure PCRE to include UTF-8 support in the code, and, in - addition, you must call pcre_compile() with the PCRE_UTF8 - option flag. When you do this, both the pattern and any sub- - ject strings that are matched against it are treated as - UTF-8 strings instead of just strings of bytes, but only in - the cases that are mentioned below. - - If you compile PCRE with UTF-8 support, but do not use it at - run time, the library will be a bit bigger, but the addi- - tional run time overhead is limited to testing the PCRE_UTF8 - flag in several places, so should not be very large. - - PCRE assumes that the strings it is given contain valid - UTF-8 codes. It does not diagnose invalid UTF-8 strings. If - you pass invalid UTF-8 strings to PCRE, the results are - undefined. - - Running with PCRE_UTF8 set causes these changes in the way - PCRE works: - - 1. In a pattern, the escape sequence \x{...}, where the con- - tents of the braces is a string of hexadecimal digits, is - interpreted as a UTF-8 character whose code number is the - given hexadecimal number, for example: \x{1234}. This - inserts from one to six literal bytes into the pattern, - using the UTF-8 encoding. If a non-hexadecimal digit appears - between the braces, the item is not recognized. - - 2. The original hexadecimal escape sequence, \xhh, generates - a two-byte UTF-8 character if its value is greater than 127. - - 3. Repeat quantifiers are NOT correctly handled if they fol- - low a multibyte character. For example, \x{100}* and \xc3+ - do not work. If you want to repeat such characters, you must - enclose them in non-capturing parentheses, for example - (?:\x{100}), at present. - - 4. The dot metacharacter matches one UTF-8 character instead - of a single byte. - - 5. Unlike literal UTF-8 characters, the dot metacharacter - followed by a repeat quantifier does operate correctly on - UTF-8 characters instead of single bytes. - - 4. Although the \x{...} escape is permitted in a character - class, characters whose values are greater than 255 cannot - be included in a class. - - 5. A class is matched against a UTF-8 character instead of - just a single byte, but it can match only characters whose - values are less than 256. Characters with greater values - always fail to match a class. - - 6. Repeated classes work correctly on multiple characters. - - 7. Classes containing just a single character whose value is - greater than 127 (but less than 256), for example, [\x80] or - [^\x{93}], do not work because these are optimized into sin- - gle byte matches. In the first case, of course, the class - brackets are just redundant. - - 8. Lookbehind assertions move backwards in the subject by a - fixed number of characters instead of a fixed number of - bytes. Simple cases have been tested to work correctly, but - there may be hidden gotchas herein. - - 9. The character types such as \d and \w do not work - correctly with UTF-8 characters. They continue to test a - single byte. - - 10. Anything not explicitly mentioned here continues to work - in bytes rather than in characters. - - The following UTF-8 features of Perl 5.6 are not imple- - mented: - 1. The escape sequence \C to match a single byte. - - 2. The use of Unicode tables and properties and escapes \p, - \P, and \X. - - - -AUTHOR - Philip Hazel <ph10(a)cam.ac.uk> - University Computing Service, - New Museums Site, - Cambridge CB2 3QG, England. - Phone: +44 1223 334714 - - Last updated: 28 August 2000, - the 250th anniversary of the death of J.S. Bach. - Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcregrep.1 b/external/privoxy/pcre/doc/pcregrep.1 deleted file mode 100644 index ec733fa..0000000 --- a/external/privoxy/pcre/doc/pcregrep.1 +++ /dev/null @@ -1,76 +0,0 @@ -.TH PCREGREP 1 -.SH NAME -pcregrep - a grep with Perl-compatible regular expressions. -.SH SYNOPSIS -.B pcregrep [-Vchilnsvx] pattern [file] ... - - -.SH DESCRIPTION -\fBpcregrep\fR searches files for character patterns, in the same way as other -grep commands do, but it uses the PCRE regular expression library to support -patterns that are compatible with the regular expressions of Perl 5. See -\fBpcre(3)\fR for a full description of syntax and semantics. - -If no files are specified, \fBpcregrep\fR reads the standard input. By default, -each line that matches the pattern is copied to the standard output, and if -there is more than one file, the file name is printed before each line of -output. However, there are options that can change how \fBpcregrep\fR behaves. - -Lines are limited to BUFSIZ characters. BUFSIZ is defined in \fB<stdio.h>\fR. -The newline character is removed from the end of each line before it is matched -against the pattern. - - -.SH OPTIONS -.TP 10 -\fB-V\fR -Write the version number of the PCRE library being used to the standard error -stream. -.TP -\fB-c\fR -Do not print individual lines; instead just print a count of the number of -lines that would otherwise have been printed. If several files are given, a -count is printed for each of them. -.TP -\fB-h\fR -Suppress printing of filenames when searching multiple files. -.TP -\fB-i\fR -Ignore upper/lower case distinctions during comparisons. -.TP -\fB-l\fR -Instead of printing lines from the files, just print the names of the files -containing lines that would have been printed. Each file name is printed -once, on a separate line. -.TP -\fB-n\fR -Precede each line by its line number in the file. -.TP -\fB-s\fR -Work silently, that is, display nothing except error messages. -The exit status indicates whether any matches were found. -.TP -\fB-v\fR -Invert the sense of the match, so that lines which do \fInot\fR match the -pattern are now the ones that are found. -.TP -\fB-x\fR -Force the pattern to be anchored (it must start matching at the beginning of -the line) and in addition, require it to match the entire line. This is -equivalent to having ^ and $ characters at the start and end of each -alternative branch in the regular expression. - - -.SH SEE ALSO -\fBpcre(3)\fR, Perl 5 documentation - - -.SH DIAGNOSTICS -Exit status is 0 if any matches were found, 1 if no matches were found, and 2 -for syntax errors or inacessible files (even if matches were found). - - -.SH AUTHOR -Philip Hazel <ph10(a)cam.ac.uk> -.br -Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcregrep.html b/external/privoxy/pcre/doc/pcregrep.html deleted file mode 100644 index 19f733c..0000000 --- a/external/privoxy/pcre/doc/pcregrep.html +++ /dev/null @@ -1,105 +0,0 @@ -<HTML> -<HEAD> -<TITLE>pcregrep specification</TITLE> -</HEAD> -<body bgcolor="#FFFFFF" text="#00005A"> -<H1>pcregrep specification</H1> -This HTML document has been generated automatically from the original man page. -If there is any nonsense in it, please consult the man page in case the -conversion went wrong. -<UL> -<LI><A NAME="TOC1" HREF="#SEC1">NAME</A> -<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A> -<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A> -<LI><A NAME="TOC4" HREF="#SEC4">OPTIONS</A> -<LI><A NAME="TOC5" HREF="#SEC5">SEE ALSO</A> -<LI><A NAME="TOC6" HREF="#SEC6">DIAGNOSTICS</A> -<LI><A NAME="TOC7" HREF="#SEC7">AUTHOR</A> -</UL> -<LI><A NAME="SEC1" HREF="#TOC1">NAME</A> -<P> -pcregrep - a grep with Perl-compatible regular expressions. -</P> -<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A> -<P> -<B>pcregrep [-Vchilnsvx] pattern [file] ...</B> -</P> -<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A> -<P> -<B>pcregrep</B> searches files for character patterns, in the same way as other -grep commands do, but it uses the PCRE regular expression library to support -patterns that are compatible with the regular expressions of Perl 5. See -<B>pcre(3)</B> for a full description of syntax and semantics. -</P> -<P> -If no files are specified, <B>pcregrep</B> reads the standard input. By default, -each line that matches the pattern is copied to the standard output, and if -there is more than one file, the file name is printed before each line of -output. However, there are options that can change how <B>pcregrep</B> behaves. -</P> -<P> -Lines are limited to BUFSIZ characters. BUFSIZ is defined in <B><stdio.h></B>. -The newline character is removed from the end of each line before it is matched -against the pattern. -</P> -<LI><A NAME="SEC4" HREF="#TOC1">OPTIONS</A> -<P> -<B>-V</B> -Write the version number of the PCRE library being used to the standard error -stream. -</P> -<P> -<B>-c</B> -Do not print individual lines; instead just print a count of the number of -lines that would otherwise have been printed. If several files are given, a -count is printed for each of them. -</P> -<P> -<B>-h</B> -Suppress printing of filenames when searching multiple files. -</P> -<P> -<B>-i</B> -Ignore upper/lower case distinctions during comparisons. -</P> -<P> -<B>-l</B> -Instead of printing lines from the files, just print the names of the files -containing lines that would have been printed. Each file name is printed -once, on a separate line. -</P> -<P> -<B>-n</B> -Precede each line by its line number in the file. -</P> -<P> -<B>-s</B> -Work silently, that is, display nothing except error messages. -The exit status indicates whether any matches were found. -</P> -<P> -<B>-v</B> -Invert the sense of the match, so that lines which do <I>not</I> match the -pattern are now the ones that are found. -</P> -<P> -<B>-x</B> -Force the pattern to be anchored (it must start matching at the beginning of -the line) and in addition, require it to match the entire line. This is -equivalent to having ^ and $ characters at the start and end of each -alternative branch in the regular expression. -</P> -<LI><A NAME="SEC5" HREF="#TOC1">SEE ALSO</A> -<P> -<B>pcre(3)</B>, Perl 5 documentation -</P> -<LI><A NAME="SEC6" HREF="#TOC1">DIAGNOSTICS</A> -<P> -Exit status is 0 if any matches were found, 1 if no matches were found, and 2 -for syntax errors or inacessible files (even if matches were found). -</P> -<LI><A NAME="SEC7" HREF="#TOC1">AUTHOR</A> -<P> -Philip Hazel <ph10(a)cam.ac.uk> -<BR> -Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcregrep.txt b/external/privoxy/pcre/doc/pcregrep.txt deleted file mode 100644 index 871350c..0000000 --- a/external/privoxy/pcre/doc/pcregrep.txt +++ /dev/null @@ -1,87 +0,0 @@ -NAME - pcregrep - a grep with Perl-compatible regular expressions. - - - -SYNOPSIS - pcregrep [-Vchilnsvx] pattern [file] ... - - - -DESCRIPTION - pcregrep searches files for character patterns, in the same - way as other grep commands do, but it uses the PCRE regular - expression library to support patterns that are compatible - with the regular expressions of Perl 5. See pcre(3) for a - full description of syntax and semantics. - - If no files are specified, pcregrep reads the standard - input. By default, each line that matches the pattern is - copied to the standard output, and if there is more than one - file, the file name is printed before each line of output. - However, there are options that can change how pcregrep - behaves. - - Lines are limited to BUFSIZ characters. BUFSIZ is defined in - <stdio.h>. The newline character is removed from the end of - each line before it is matched against the pattern. - - - -OPTIONS - -V Write the version number of the PCRE library being - used to the standard error stream. - - -c Do not print individual lines; instead just print - a count of the number of lines that would other- - wise have been printed. If several files are - given, a count is printed for each of them. - - -h Suppress printing of filenames when searching mul- - tiple files. - - -i Ignore upper/lower case distinctions during com- - parisons. - - -l Instead of printing lines from the files, just - print the names of the files containing lines that - would have been printed. Each file name is printed - once, on a separate line. - - -n Precede each line by its line number in the file. - - -s Work silently, that is, display nothing except - error messages. The exit status indicates whether - any matches were found. - - -v Invert the sense of the match, so that lines which - do not match the pattern are now the ones that are - found. - - -x Force the pattern to be anchored (it must start - matching at the beginning of the line) and in - addition, require it to match the entire line. - This is equivalent to having ^ and $ characters at - the start and end of each alternative branch in - the regular expression. - - - -SEE ALSO - pcre(3), Perl 5 documentation - - - - - -DIAGNOSTICS - Exit status is 0 if any matches were found, 1 if no matches - were found, and 2 for syntax errors or inacessible files - (even if matches were found). - - - -AUTHOR - Philip Hazel <ph10(a)cam.ac.uk> - Copyright (c) 1997-2000 University of Cambridge. - diff --git a/external/privoxy/pcre/doc/pcreposix.3 b/external/privoxy/pcre/doc/pcreposix.3 deleted file mode 100644 index 4853a97..0000000 --- a/external/privoxy/pcre/doc/pcreposix.3 +++ /dev/null @@ -1,149 +0,0 @@ -.TH PCRE 3 -.SH NAME -pcreposix - POSIX API for Perl-compatible regular expressions. -.SH SYNOPSIS -.B #include <pcreposix.h> -.PP -.SM -.br -.B int regcomp(regex_t *\fIpreg\fR, const char *\fIpattern\fR, -.ti +5n -.B int \fIcflags\fR); -.PP -.br -.B int regexec(regex_t *\fIpreg\fR, const char *\fIstring\fR, -.ti +5n -.B size_t \fInmatch\fR, regmatch_t \fIpmatch\fR[], int \fIeflags\fR); -.PP -.br -.B size_t regerror(int \fIerrcode\fR, const regex_t *\fIpreg\fR, -.ti +5n -.B char *\fIerrbuf\fR, size_t \fIerrbuf_size\fR); -.PP -.br -.B void regfree(regex_t *\fIpreg\fR); - - -.SH DESCRIPTION -This set of functions provides a POSIX-style API to the PCRE regular expression -package. See the \fBpcre\fR documentation for a description of the native API, -which contains additional functionality. - -The functions described here are just wrapper functions that ultimately call -the native API. Their prototypes are defined in the \fBpcreposix.h\fR header -file, and on Unix systems the library itself is called \fBpcreposix.a\fR, so -can be accessed by adding \fB-lpcreposix\fR to the command for linking an -application which uses them. Because the POSIX functions call the native ones, -it is also necessary to add \fR-lpcre\fR. - -I have implemented only those option bits that can be reasonably mapped to PCRE -native options. In addition, the options REG_EXTENDED and REG_NOSUB are defined -with the value zero. They have no effect, but since programs that are written -to the POSIX interface often use them, this makes it easier to slot in PCRE as -a replacement library. Other POSIX options are not even defined. - -When PCRE is called via these functions, it is only the API that is POSIX-like -in style. The syntax and semantics of the regular expressions themselves are -still those of Perl, subject to the setting of various PCRE options, as -described below. - -The header for these functions is supplied as \fBpcreposix.h\fR to avoid any -potential clash with other POSIX libraries. It can, of course, be renamed or -aliased as \fBregex.h\fR, which is the "correct" name. It provides two -structure types, \fIregex_t\fR for compiled internal forms, and -\fIregmatch_t\fR for returning captured substrings. It also defines some -constants whose names start with "REG_"; these are used for setting options and -identifying error codes. - - -.SH COMPILING A PATTERN - -The function \fBregcomp()\fR is called to compile a pattern into an -internal form. The pattern is a C string terminated by a binary zero, and -is passed in the argument \fIpattern\fR. The \fIpreg\fR argument is a pointer -to a regex_t structure which is used as a base for storing information about -the compiled expression. - -The argument \fIcflags\fR is either zero, or contains one or more of the bits -defined by the following macros: - - REG_ICASE - -The PCRE_CASELESS option is set when the expression is passed for compilation -to the native function. - - REG_NEWLINE - -The PCRE_MULTILINE option is set when the expression is passed for compilation -to the native function. - -In the absence of these flags, no options are passed to the native function. -This means the the regex is compiled with PCRE default semantics. In -particular, the way it handles newline characters in the subject string is the -Perl way, not the POSIX way. Note that setting PCRE_MULTILINE has only -\fIsome\fR of the effects specified for REG_NEWLINE. It does not affect the way -newlines are matched by . (they aren't) or a negative class such as [^a] (they -are). - -The yield of \fBregcomp()\fR is zero on success, and non-zero otherwise. The -\fIpreg\fR structure is filled in on success, and one member of the structure -is publicized: \fIre_nsub\fR contains the number of capturing subpatterns in -the regular expression. Various error codes are defined in the header file. - - -.SH MATCHING A PATTERN -The function \fBregexec()\fR is called to match a pre-compiled pattern -\fIpreg\fR against a given \fIstring\fR, which is terminated by a zero byte, -subject to the options in \fIeflags\fR. These can be: - - REG_NOTBOL - -The PCRE_NOTBOL option is set when calling the underlying PCRE matching -function. - - REG_NOTEOL - -The PCRE_NOTEOL option is set when calling the underlying PCRE matching -function. - -The portion of the string that was matched, and also any captured substrings, -are returned via the \fIpmatch\fR argument, which points to an array of -\fInmatch\fR structures of type \fIregmatch_t\fR, containing the members -\fIrm_so\fR and \fIrm_eo\fR. These contain the offset to the first character of -each substring and the offset to the first character after the end of each -substring, respectively. The 0th element of the vector relates to the entire -portion of \fIstring\fR that was matched; subsequent elements relate to the -capturing subpatterns of the regular expression. Unused entries in the array -have both structure members set to -1. - -A successful match yields a zero return; various error codes are defined in the -header file, of which REG_NOMATCH is the "expected" failure code. - - -.SH ERROR MESSAGES -The \fBregerror()\fR function maps a non-zero errorcode from either -\fBregcomp\fR or \fBregexec\fR to a printable message. If \fIpreg\fR is not -NULL, the error should have arisen from the use of that structure. A message -terminated by a binary zero is placed in \fIerrbuf\fR. The length of the -message, including the zero, is limited to \fIerrbuf_size\fR. The yield of the -function is the size of buffer needed to hold the whole message. - - -.SH STORAGE -Compiling a regular expression causes memory to be allocated and associated -with the \fIpreg\fR structure. The function \fBregfree()\fR frees all such -memory, after which \fIpreg\fR may no longer be used as a compiled expression. - - -.SH AUTHOR -Philip Hazel <ph10(a)cam.ac.uk> -.br -University Computing Service, -.br -New Museums Site, -.br -Cambridge CB2 3QG, England. -.br -Phone: +44 1223 334714 - -Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcreposix.html b/external/privoxy/pcre/doc/pcreposix.html deleted file mode 100644 index 79ff544..0000000 --- a/external/privoxy/pcre/doc/pcreposix.html +++ /dev/null @@ -1,191 +0,0 @@ -<HTML> -<HEAD> -<TITLE>pcreposix specification</TITLE> -</HEAD> -<body bgcolor="#FFFFFF" text="#00005A"> -<H1>pcreposix specification</H1> -This HTML document has been generated automatically from the original man page. -If there is any nonsense in it, please consult the man page in case the -conversion went wrong. -<UL> -<LI><A NAME="TOC1" HREF="#SEC1">NAME</A> -<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A> -<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A> -<LI><A NAME="TOC4" HREF="#SEC4">COMPILING A PATTERN</A> -<LI><A NAME="TOC5" HREF="#SEC5">MATCHING A PATTERN</A> -<LI><A NAME="TOC6" HREF="#SEC6">ERROR MESSAGES</A> -<LI><A NAME="TOC7" HREF="#SEC7">STORAGE</A> -<LI><A NAME="TOC8" HREF="#SEC8">AUTHOR</A> -</UL> -<LI><A NAME="SEC1" HREF="#TOC1">NAME</A> -<P> -pcreposix - POSIX API for Perl-compatible regular expressions. -</P> -<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A> -<P> -<B>#include <pcreposix.h></B> -</P> -<P> -<B>int regcomp(regex_t *<I>preg</I>, const char *<I>pattern</I>,</B> -<B>int <I>cflags</I>);</B> -</P> -<P> -<B>int regexec(regex_t *<I>preg</I>, const char *<I>string</I>,</B> -<B>size_t <I>nmatch</I>, regmatch_t <I>pmatch</I>[], int <I>eflags</I>);</B> -</P> -<P> -<B>size_t regerror(int <I>errcode</I>, const regex_t *<I>preg</I>,</B> -<B>char *<I>errbuf</I>, size_t <I>errbuf_size</I>);</B> -</P> -<P> -<B>void regfree(regex_t *<I>preg</I>);</B> -</P> -<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A> -<P> -This set of functions provides a POSIX-style API to the PCRE regular expression -package. See the <B>pcre</B> documentation for a description of the native API, -which contains additional functionality. -</P> -<P> -The functions described here are just wrapper functions that ultimately call -the native API. Their prototypes are defined in the <B>pcreposix.h</B> header -file, and on Unix systems the library itself is called <B>pcreposix.a</B>, so -can be accessed by adding <B>-lpcreposix</B> to the command for linking an -application which uses them. Because the POSIX functions call the native ones, -it is also necessary to add \fR-lpcre\fR. -</P> -<P> -I have implemented only those option bits that can be reasonably mapped to PCRE -native options. In addition, the options REG_EXTENDED and REG_NOSUB are defined -with the value zero. They have no effect, but since programs that are written -to the POSIX interface often use them, this makes it easier to slot in PCRE as -a replacement library. Other POSIX options are not even defined. -</P> -<P> -When PCRE is called via these functions, it is only the API that is POSIX-like -in style. The syntax and semantics of the regular expressions themselves are -still those of Perl, subject to the setting of various PCRE options, as -described below. -</P> -<P> -The header for these functions is supplied as <B>pcreposix.h</B> to avoid any -potential clash with other POSIX libraries. It can, of course, be renamed or -aliased as <B>regex.h</B>, which is the "correct" name. It provides two -structure types, <I>regex_t</I> for compiled internal forms, and -<I>regmatch_t</I> for returning captured substrings. It also defines some -constants whose names start with "REG_"; these are used for setting options and -identifying error codes. -</P> -<LI><A NAME="SEC4" HREF="#TOC1">COMPILING A PATTERN</A> -<P> -The function <B>regcomp()</B> is called to compile a pattern into an -internal form. The pattern is a C string terminated by a binary zero, and -is passed in the argument <I>pattern</I>. The <I>preg</I> argument is a pointer -to a regex_t structure which is used as a base for storing information about -the compiled expression. -</P> -<P> -The argument <I>cflags</I> is either zero, or contains one or more of the bits -defined by the following macros: -</P> -<P> -<PRE> - REG_ICASE -</PRE> -</P> -<P> -The PCRE_CASELESS option is set when the expression is passed for compilation -to the native function. -</P> -<P> -<PRE> - REG_NEWLINE -</PRE> -</P> -<P> -The PCRE_MULTILINE option is set when the expression is passed for compilation -to the native function. -</P> -<P> -In the absence of these flags, no options are passed to the native function. -This means the the regex is compiled with PCRE default semantics. In -particular, the way it handles newline characters in the subject string is the -Perl way, not the POSIX way. Note that setting PCRE_MULTILINE has only -<I>some</I> of the effects specified for REG_NEWLINE. It does not affect the way -newlines are matched by . (they aren't) or a negative class such as [^a] (they -are). -</P> -<P> -The yield of <B>regcomp()</B> is zero on success, and non-zero otherwise. The -<I>preg</I> structure is filled in on success, and one member of the structure -is publicized: <I>re_nsub</I> contains the number of capturing subpatterns in -the regular expression. Various error codes are defined in the header file. -</P> -<LI><A NAME="SEC5" HREF="#TOC1">MATCHING A PATTERN</A> -<P> -The function <B>regexec()</B> is called to match a pre-compiled pattern -<I>preg</I> against a given <I>string</I>, which is terminated by a zero byte, -subject to the options in <I>eflags</I>. These can be: -</P> -<P> -<PRE> - REG_NOTBOL -</PRE> -</P> -<P> -The PCRE_NOTBOL option is set when calling the underlying PCRE matching -function. -</P> -<P> -<PRE> - REG_NOTEOL -</PRE> -</P> -<P> -The PCRE_NOTEOL option is set when calling the underlying PCRE matching -function. -</P> -<P> -The portion of the string that was matched, and also any captured substrings, -are returned via the <I>pmatch</I> argument, which points to an array of -<I>nmatch</I> structures of type <I>regmatch_t</I>, containing the members -<I>rm_so</I> and <I>rm_eo</I>. These contain the offset to the first character of -each substring and the offset to the first character after the end of each -substring, respectively. The 0th element of the vector relates to the entire -portion of <I>string</I> that was matched; subsequent elements relate to the -capturing subpatterns of the regular expression. Unused entries in the array -have both structure members set to -1. -</P> -<P> -A successful match yields a zero return; various error codes are defined in the -header file, of which REG_NOMATCH is the "expected" failure code. -</P> -<LI><A NAME="SEC6" HREF="#TOC1">ERROR MESSAGES</A> -<P> -The <B>regerror()</B> function maps a non-zero errorcode from either -<B>regcomp</B> or <B>regexec</B> to a printable message. If <I>preg</I> is not -NULL, the error should have arisen from the use of that structure. A message -terminated by a binary zero is placed in <I>errbuf</I>. The length of the -message, including the zero, is limited to <I>errbuf_size</I>. The yield of the -function is the size of buffer needed to hold the whole message. -</P> -<LI><A NAME="SEC7" HREF="#TOC1">STORAGE</A> -<P> -Compiling a regular expression causes memory to be allocated and associated -with the <I>preg</I> structure. The function <B>regfree()</B> frees all such -memory, after which <I>preg</I> may no longer be used as a compiled expression. -</P> -<LI><A NAME="SEC8" HREF="#TOC1">AUTHOR</A> -<P> -Philip Hazel <ph10(a)cam.ac.uk> -<BR> -University Computing Service, -<BR> -New Museums Site, -<BR> -Cambridge CB2 3QG, England. -<BR> -Phone: +44 1223 334714 -</P> -<P> -Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcreposix.txt b/external/privoxy/pcre/doc/pcreposix.txt deleted file mode 100644 index 2d76f7c..0000000 --- a/external/privoxy/pcre/doc/pcreposix.txt +++ /dev/null @@ -1,159 +0,0 @@ -NAME - pcreposix - POSIX API for Perl-compatible regular expres- - sions. - - - -SYNOPSIS - #include <pcreposix.h> - - int regcomp(regex_t *preg, const char *pattern, - int cflags); - - int regexec(regex_t *preg, const char *string, - size_t nmatch, regmatch_t pmatch[], int eflags); - - size_t regerror(int errcode, const regex_t *preg, - char *errbuf, size_t errbuf_size); - - void regfree(regex_t *preg); - - - -DESCRIPTION - This set of functions provides a POSIX-style API to the PCRE - regular expression package. See the pcre documentation for a - description of the native API, which contains additional - functionality. - - The functions described here are just wrapper functions that - ultimately call the native API. Their prototypes are defined - in the pcreposix.h header file, and on Unix systems the - library itself is called pcreposix.a, so can be accessed by - adding -lpcreposix to the command for linking an application - which uses them. Because the POSIX functions call the native - ones, it is also necessary to add -lpcre. - - I have implemented only those option bits that can be rea- - sonably mapped to PCRE native options. In addition, the - options REG_EXTENDED and REG_NOSUB are defined with the - value zero. They have no effect, but since programs that are - written to the POSIX interface often use them, this makes it - easier to slot in PCRE as a replacement library. Other POSIX - options are not even defined. - - When PCRE is called via these functions, it is only the API - that is POSIX-like in style. The syntax and semantics of the - regular expressions themselves are still those of Perl, sub- - ject to the setting of various PCRE options, as described - below. - - The header for these functions is supplied as pcreposix.h to - avoid any potential clash with other POSIX libraries. It - can, of course, be renamed or aliased as regex.h, which is - the "correct" name. It provides two structure types, regex_t - for compiled internal forms, and regmatch_t for returning - captured substrings. It also defines some constants whose - names start with "REG_"; these are used for setting options - and identifying error codes. - - - -COMPILING A PATTERN - The function regcomp() is called to compile a pattern into - an internal form. The pattern is a C string terminated by a - binary zero, and is passed in the argument pattern. The preg - argument is a pointer to a regex_t structure which is used - as a base for storing information about the compiled expres- - sion. - - The argument cflags is either zero, or contains one or more - of the bits defined by the following macros: - - REG_ICASE - - The PCRE_CASELESS option is set when the expression is - passed for compilation to the native function. - - REG_NEWLINE - - The PCRE_MULTILINE option is set when the expression is - passed for compilation to the native function. - - In the absence of these flags, no options are passed to the - native function. This means the the regex is compiled with - PCRE default semantics. In particular, the way it handles - newline characters in the subject string is the Perl way, - not the POSIX way. Note that setting PCRE_MULTILINE has only - some of the effects specified for REG_NEWLINE. It does not - affect the way newlines are matched by . (they aren't) or a - negative class such as [^a] (they are). - - The yield of regcomp() is zero on success, and non-zero oth- - erwise. The preg structure is filled in on success, and one - member of the structure is publicized: re_nsub contains the - number of capturing subpatterns in the regular expression. - Various error codes are defined in the header file. - - - -MATCHING A PATTERN - The function regexec() is called to match a pre-compiled - pattern preg against a given string, which is terminated by - a zero byte, subject to the options in eflags. These can be: - - REG_NOTBOL - - The PCRE_NOTBOL option is set when calling the underlying - PCRE matching function. - - REG_NOTEOL - - The PCRE_NOTEOL option is set when calling the underlying - PCRE matching function. - - The portion of the string that was matched, and also any - captured substrings, are returned via the pmatch argument, - which points to an array of nmatch structures of type - regmatch_t, containing the members rm_so and rm_eo. These - contain the offset to the first character of each substring - and the offset to the first character after the end of each - substring, respectively. The 0th element of the vector - relates to the entire portion of string that was matched; - subsequent elements relate to the capturing subpatterns of - the regular expression. Unused entries in the array have - both structure members set to -1. - - A successful match yields a zero return; various error codes - are defined in the header file, of which REG_NOMATCH is the - "expected" failure code. - - - -ERROR MESSAGES - The regerror() function maps a non-zero errorcode from - either regcomp or regexec to a printable message. If preg is - not NULL, the error should have arisen from the use of that - structure. A message terminated by a binary zero is placed - in errbuf. The length of the message, including the zero, is - limited to errbuf_size. The yield of the function is the - size of buffer needed to hold the whole message. - - - -STORAGE - Compiling a regular expression causes memory to be allocated - and associated with the preg structure. The function reg- - free() frees all such memory, after which preg may no longer - be used as a compiled expression. - - - -AUTHOR - Philip Hazel <ph10(a)cam.ac.uk> - University Computing Service, - New Museums Site, - Cambridge CB2 3QG, England. - Phone: +44 1223 334714 - - Copyright (c) 1997-2000 University of Cambridge. diff --git a/external/privoxy/pcre/doc/pcretest.txt b/external/privoxy/pcre/doc/pcretest.txt deleted file mode 100644 index 722e6b8..0000000 --- a/external/privoxy/pcre/doc/pcretest.txt +++ /dev/null @@ -1,246 +0,0 @@ -The pcretest program --------------------- - -This program is intended for testing PCRE, but it can also be used for -experimenting with regular expressions. - -If it is given two filename arguments, it reads from the first and writes to -the second. If it is given only one filename argument, it reads from that file -and writes to stdout. Otherwise, it reads from stdin and writes to stdout, and -prompts for each line of input, using "re>" to prompt for regular expressions, -and "data>" to prompt for data lines. - -The program handles any number of sets of input on a single input file. Each -set starts with a regular expression, and continues with any number of data -lines to be matched against the pattern. An empty line signals the end of the -data lines, at which point a new regular expression is read. The regular -expressions are given enclosed in any non-alphameric delimiters other than -backslash, for example - - /(a|bc)x+yz/ - -White space before the initial delimiter is ignored. A regular expression may -be continued over several input lines, in which case the newline characters are -included within it. See the test input files in the testdata directory for many -examples. It is possible to include the delimiter within the pattern by -escaping it, for example - - /abc\/def/ - -If you do so, the escape and the delimiter form part of the pattern, but since -delimiters are always non-alphameric, this does not affect its interpretation. -If the terminating delimiter is immediately followed by a backslash, for -example, - - /abc/\ - -then a backslash is added to the end of the pattern. This is done to provide a -way of testing the error condition that arises if a pattern finishes with a -backslash, because - - /abc\/ - -is interpreted as the first line of a pattern that starts with "abc/", causing -pcretest to read the next line as a continuation of the regular expression. - - -PATTERN MODIFIERS ------------------ - -The pattern may be followed by i, m, s, or x to set the PCRE_CASELESS, -PCRE_MULTILINE, PCRE_DOTALL, or PCRE_EXTENDED options, respectively. For -example: - - /caseless/i - -These modifier letters have the same effect as they do in Perl. There are -others which set PCRE options that do not correspond to anything in Perl: /A, -/E, and /X set PCRE_ANCHORED, PCRE_DOLLAR_ENDONLY, and PCRE_EXTRA respectively. - -Searching for all possible matches within each subject string can be requested -by the /g or /G modifier. After finding a match, PCRE is called again to search -the remainder of the subject string. The difference between /g and /G is that -the former uses the startoffset argument to pcre_exec() to start searching at -a new point within the entire string (which is in effect what Perl does), -whereas the latter passes over a shortened substring. This makes a difference -to the matching process if the pattern begins with a lookbehind assertion -(including \b or \B). - -If any call to pcre_exec() in a /g or /G sequence matches an empty string, the -next call is done with the PCRE_NOTEMPTY and PCRE_ANCHORED flags set in order -to search for another, non-empty, match at the same point. If this second match -fails, the start offset is advanced by one, and the normal match is retried. -This imitates the way Perl handles such cases when using the /g modifier or the -split() function. - -There are a number of other modifiers for controlling the way pcretest -operates. - -The /+ modifier requests that as well as outputting the substring that matched -the entire pattern, pcretest should in addition output the remainder of the -subject string. This is useful for tests where the subject contains multiple -copies of the same substring. - -The /L modifier must be followed directly by the name of a locale, for example, - - /pattern/Lfr - -For this reason, it must be the last modifier letter. The given locale is set, -pcre_maketables() is called to build a set of character tables for the locale, -and this is then passed to pcre_compile() when compiling the regular -expression. Without an /L modifier, NULL is passed as the tables pointer; that -is, /L applies only to the expression on which it appears. - -The /I modifier requests that pcretest output information about the compiled -expression (whether it is anchored, has a fixed first character, and so on). It -does this by calling pcre_fullinfo() after compiling an expression, and -outputting the information it gets back. If the pattern is studied, the results -of that are also output. - -The /D modifier is a PCRE debugging feature, which also assumes /I. It causes -the internal form of compiled regular expressions to be output after -compilation. - -The /S modifier causes pcre_study() to be called after the expression has been -compiled, and the results used when the expression is matched. - -The /M modifier causes the size of memory block used to hold the compiled -pattern to be output. - -The /P modifier causes pcretest to call PCRE via the POSIX wrapper API rather -than its native API. When this is done, all other modifiers except /i, /m, and -/+ are ignored. REG_ICASE is set if /i is present, and REG_NEWLINE is set if /m -is present. The wrapper functions force PCRE_DOLLAR_ENDONLY always, and -PCRE_DOTALL unless REG_NEWLINE is set. - -The /8 modifier causes pcretest to call PCRE with the PCRE_UTF8 option set. -This turns on the (currently incomplete) support for UTF-8 character handling -in PCRE, provided that it was compiled with this support enabled. This modifier -also causes any non-printing characters in output strings to be printed using -the \x{hh...} notation if they are valid UTF-8 sequences. - - -DATA LINES ----------- - -Before each data line is passed to pcre_exec(), leading and trailing whitespace -is removed, and it is then scanned for \ escapes. The following are recognized: - - \a alarm (= BEL) - \b backspace - \e escape - \f formfeed - \n newline - \r carriage return - \t tab - \v vertical tab - \nnn octal character (up to 3 octal digits) - \xhh hexadecimal character (up to 2 hex digits) - \x{hh...} hexadecimal UTF-8 character - - \A pass the PCRE_ANCHORED option to pcre_exec() - \B pass the PCRE_NOTBOL option to pcre_exec() - \Cdd call pcre_copy_substring() for substring dd after a successful - match (any decimal number less than 32) - \Gdd call pcre_get_substring() for substring dd after a successful - match (any decimal number less than 32) - \L call pcre_get_substringlist() after a successful match - \N pass the PCRE_NOTEMPTY option to pcre_exec() - \Odd set the size of the output vector passed to pcre_exec() to dd - (any number of decimal digits) - \Z pass the PCRE_NOTEOL option to pcre_exec() - -A backslash followed by anything else just escapes the anything else. If the -very last character is a backslash, it is ignored. This gives a way of passing -an empty line as data, since a real empty line terminates the data input. - -If /P was present on the regex, causing the POSIX wrapper API to be used, only -\B, and \Z have any effect, causing REG_NOTBOL and REG_NOTEOL to be passed to -regexec() respectively. - -The use of \x{hh...} to represent UTF-8 characters is not dependent on the use -of the /8 modifier on the pattern. It is recognized always. There may be any -number of hexadecimal digits inside the braces. The result is from one to six -bytes, encoded according to the UTF-8 rules. - - -OUTPUT FROM PCRETEST --------------------- - -When a match succeeds, pcretest outputs the list of captured substrings that -pcre_exec() returns, starting with number 0 for the string that matched the -whole pattern. Here is an example of an interactive pcretest run. - - $ pcretest - PCRE version 2.06 08-Jun-1999 - - re> /^abc(\d+)/ - data> abc123 - 0: abc123 - 1: 123 - data> xyz - No match - -If the strings contain any non-printing characters, they are output as \0x -escapes, or as \x{...} escapes if the /8 modifier was present on the pattern. -If the pattern has the /+ modifier, then the output for substring 0 is followed -by the the rest of the subject string, identified by "0+" like this: - - re> /cat/+ - data> cataract - 0: cat - 0+ aract - -If the pattern has the /g or /G modifier, the results of successive matching -attempts are output in sequence, like this: - - re> /\Bi(\w\w)/g - data> Mississippi - 0: iss - 1: ss - 0: iss - 1: ss - 0: ipp - 1: pp - -"No match" is output only if the first match attempt fails. - -If any of \C, \G, or \L are present in a data line that is successfully -matched, the substrings extracted by the convenience functions are output with -C, G, or L after the string number instead of a colon. This is in addition to -the normal full list. The string length (that is, the return from the -extraction function) is given in parentheses after each string for \C and \G. - -Note that while patterns can be continued over several lines (a plain ">" -prompt is used for continuations), data lines may not. However newlines can be -included in data by means of the \n escape. - - -COMMAND LINE OPTIONS --------------------- - -If the -p option is given to pcretest, it is equivalent to adding /P to each -regular expression: the POSIX wrapper API is used to call PCRE. None of the -following flags has any effect in this case. - -If the option -d is given to pcretest, it is equivalent to adding /D to each -regular expression: the internal form is output after compilation. - -If the option -i is given to pcretest, it is equivalent to adding /I to each -regular expression: information about the compiled pattern is given after -compilation. - -If the option -m is given to pcretest, it outputs the size of each compiled -pattern after it has been compiled. It is equivalent to adding /M to each -regular expression. For compatibility with earlier versions of pcretest, -s is -a synonym for -m. - -If the -t option is given, each compile, study, and match is run 20000 times -while being timed, and the resulting time per compile or match is output in -milliseconds. Do not set -t with -m, because you will then get the size output -20000 times and the timing will be distorted. If you want to change the number -of repetitions used for timing, edit the definition of LOOPREPEAT at the top of -pcretest.c - -Philip Hazel <ph10(a)cam.ac.uk> -August 2000 diff --git a/external/privoxy/pcre/doc/perltest.txt b/external/privoxy/pcre/doc/perltest.txt deleted file mode 100644 index 33155c1..0000000 --- a/external/privoxy/pcre/doc/perltest.txt +++ /dev/null @@ -1,29 +0,0 @@ -The perltest program --------------------- - -The perltest program tests Perl's regular expressions; it has the same -specification as pcretest, and so can be given identical input, except that -input patterns can be followed only by Perl's lower case modifiers and /+ (as -used by pcretest), which is recognized and handled by the program. - -The data lines are processed as Perl double-quoted strings, so if they contain -" \ $ or @ characters, these have to be escaped. For this reason, all such -characters in testinput1 and testinput3 are escaped so that they can be used -for perltest as well as for pcretest, and the special upper case modifiers such -as /A that pcretest recognizes are not used in these files. The output should -be identical, apart from the initial identifying banner. - -For testing UTF-8 features, an alternative form of perltest, called perltest8, -is supplied. This requires Perl 5.6 or higher. It recognizes the special -modifier /8 that pcretest uses to invoke UTF-8 functionality. The testinput5 -file can be fed to perltest8. - -The testinput2 and testinput4 files are not suitable for feeding to perltest, -since they do make use of the special upper case modifiers and escapes that -pcretest uses to test some features of PCRE. The first of these files also -contains malformed regular expressions, in order to check that PCRE diagnoses -them correctly. Similarly, testinput6 tests UTF-8 features that do not relate -to Perl. - -Philip Hazel <ph10(a)cam.ac.uk> -August 2000 diff --git a/external/privoxy/pcre/doc/readme b/external/privoxy/pcre/doc/readme deleted file mode 100644 index d124ee0..0000000 --- a/external/privoxy/pcre/doc/readme +++ /dev/null @@ -1,270 +0,0 @@ -README file for PCRE (Perl-compatible regular expression library) ------------------------------------------------------------------ - -The latest release of PCRE is always available from - - ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz - -Please read the NEWS file if you are upgrading from a previous release. - -PCRE has its own native API, but a set of "wrapper" functions that are based on -the POSIX API are also supplied in the library libpcreposix. Note that this -just provides a POSIX calling interface to PCRE: the regular expressions -themselves still follow Perl syntax and semantics. The header file -for the POSIX-style functions is called pcreposix.h. The official POSIX name is -regex.h, but I didn't want to risk possible problems with existing files of -that name by distributing it that way. To use it with an existing program that -uses the POSIX API, it will have to be renamed or pointed at by a link. - - -Building PCRE on a Unix system ------------------------------- - -To build PCRE on a Unix system, run the "configure" command in the PCRE -distribution directory. This is a standard GNU "autoconf" configuration script, -for which generic instructions are supplied in INSTALL. On many systems just -running "./configure" is sufficient, but the usual methods of changing standard -defaults are available. For example, - -CFLAGS='-O2 -Wall' ./configure --prefix=/opt/local - -specifies that the C compiler should be run with the flags '-O2 -Wall' instead -of the default, and that "make install" should install PCRE under /opt/local -instead of the default /usr/local. - -If you want to make use of the experimential, incomplete support for UTF-8 -character strings in PCRE, you must add --enable-utf8 to the "configure" -command. Without it, the code for handling UTF-8 is not included in the -library. (Even when included, it still has to be enabled by an option at run -time.) - -The "configure" script builds four files: - -. Makefile is built by copying Makefile.in and making substitutions. -. config.h is built by copying config.in and making substitutions. -. pcre-config is built by copying pcre-config.in and making substitutions. -. RunTest is a script for running tests - -Once "configure" has run, you can run "make". It builds two libraries called -libpcre and libpcreposix, a test program called pcretest, and the pcregrep -command. You can use "make install" to copy these, and the public header file -pcre.h, to appropriate live directories on your system, in the normal way. - -Running "make install" also installs the command pcre-config, which can be used -to recall information about the PCRE configuration and installation. For -example, - - pcre-config --version - -prints the version number, and - - pcre-config --libs - -outputs information about where the library is installed. This command can be -included in makefiles for programs that use PCRE, saving the programmer from -having to remember too many details. - - -Shared libraries on Unix systems --------------------------------- - -The default distribution builds PCRE as two shared libraries. This support is -new and experimental and may not work on all systems. It relies on the -"libtool" scripts - these are distributed with PCRE. It should build a -"libtool" script and use this to compile and link shared libraries, which are -placed in a subdirectory called .libs. The programs pcretest and pcregrep are -built to use these uninstalled libraries by means of wrapper scripts. When you -use "make install" to install shared libraries, pcregrep and pcretest are -automatically re-built to use the newly installed libraries. However, only -pcregrep is installed, as pcretest is really just a test program. - -To build PCRE using static libraries you must use --disable-shared when -configuring it. For example - -./configure --prefix=/usr/gnu --disable-shared - -Then run "make" in the usual way. - - -Building on non-Unix systems ----------------------------- - -For a non-Unix system, read the comments in the file NON-UNIX-USE. PCRE has -been compiled on Windows systems and on Macintoshes, but I don't know the -details because I don't use those systems. It should be straightforward to -build PCRE on any system that has a Standard C compiler, because it uses only -Standard C functions. - - -Testing PCRE ------------- - -To test PCRE on a Unix system, run the RunTest script in the pcre directory. -(This can also be run by "make runtest", "make check", or "make test".) For -other systems, see the instruction in NON-UNIX-USE. - -The script runs the pcretest test program (which is documented in -doc/pcretest.txt) on each of the testinput files (in the testdata directory) in -turn, and compares the output with the contents of the corresponding testoutput -file. A file called testtry is used to hold the output from pcretest. To run -pcretest on just one of the test files, give its number as an argument to -RunTest, for example: - - RunTest 3 - -The first and third test files can also be fed directly into the perltest -script to check that Perl gives the same results. The third file requires the -additional features of release 5.005, which is why it is kept separate from the -main test input, which needs only Perl 5.004. In the long run, when 5.005 (or -higher) is widespread, these two test files may get amalgamated. - -The second set of tests check pcre_fullinfo(), pcre_info(), pcre_study(), -pcre_copy_substring(), pcre_get_substring(), pcre_get_substring_list(), error -detection, and run-time flags that are specific to PCRE, as well as the POSIX -wrapper API. It also uses the debugging flag to check some of the internals of -pcre_compile(). - -If you build PCRE with a locale setting that is not the standard C locale, the -character tables may be different (see next paragraph). In some cases, this may -cause failures in the second set of tests. For example, in a locale where the -isprint() function yields TRUE for characters in the range 128-255, the use of -[:isascii:] inside a character class defines a different set of characters, and -this shows up in this test as a difference in the compiled code, which is being -listed for checking. Where the comparison test output contains [\x00-\x7f] the -test will contain [\x00-\xff], and similarly in some other cases. This is not a -bug in PCRE. - -The fourth set of tests checks pcre_maketables(), the facility for building a -set of character tables for a specific locale and using them instead of the -default tables. The tests make use of the "fr" (French) locale. Before running -the test, the script checks for the presence of this locale by running the -"locale" command. If that command fails, or if it doesn't include "fr" in the -list of available locales, the fourth test cannot be run, and a comment is -output to say why. If running this test produces instances of the error - - ** Failed to set locale "fr" - -in the comparison output, it means that locale is not available on your system, -despite being listed by "locale". This does not mean that PCRE is broken. - -The fifth test checks the experimental, incomplete UTF-8 support. It is not run -automatically unless PCRE is built with UTF-8 support. This file can be fed -directly to the perltest8 script, which requires Perl 5.6 or higher. The sixth -file tests internal UTF-8 features of PCRE that are not relevant to Perl. - - -Character tables ----------------- - -PCRE uses four tables for manipulating and identifying characters. The final -argument of the pcre_compile() function is a pointer to a block of memory -containing the concatenated tables. A call to pcre_maketables() can be used to -generate a set of tables in the current locale. If the final argument for -pcre_compile() is passed as NULL, a set of default tables that is built into -the binary is used. - -The source file called chartables.c contains the default set of tables. This is -not supplied in the distribution, but is built by the program dftables -(compiled from dftables.c), which uses the ANSI C character handling functions -such as isalnum(), isalpha(), isupper(), islower(), etc. to build the table -sources. This means that the default C locale which is set for your system will -control the contents of these default tables. You can change the default tables -by editing chartables.c and then re-building PCRE. If you do this, you should -probably also edit Makefile to ensure that the file doesn't ever get -re-generated. - -The first two 256-byte tables provide lower casing and case flipping functions, -respectively. The next table consists of three 32-byte bit maps which identify -digits, "word" characters, and white space, respectively. These are used when -building 32-byte bit maps that represent character classes. - -The final 256-byte table has bits indicating various character types, as -follows: - - 1 white space character - 2 letter - 4 decimal digit - 8 hexadecimal digit - 16 alphanumeric or '_' - 128 regular expression metacharacter or binary zero - -You should not alter the set of characters that contain the 128 bit, as that -will cause PCRE to malfunction. - - -Manifest --------- - -The distribution should contain the following files: - -(A) The actual source files of the PCRE library functions and their - headers: - - dftables.c auxiliary program for building chartables.c - get.c ) - maketables.c ) - study.c ) source of - pcre.c ) the functions - pcreposix.c ) - pcre.in "source" for the header for the external API; pcre.h - is built from this by "configure" - pcreposix.h header for the external POSIX wrapper API - internal.h header for internal use - config.in template for config.h, which is built by configure - -(B) Auxiliary files: - - AUTHORS information about the author of PCRE - ChangeLog log of changes to the code - INSTALL generic installation instructions - LICENCE conditions for the use of PCRE - COPYING the same, using GNU's standard name - Makefile.in template for Unix Makefile, which is built by configure - NEWS important changes in this release - NON-UNIX-USE notes on building PCRE on non-Unix systems - README this file - RunTest.in template for a Unix shell script for running tests - config.guess ) files used by libtool, - config.sub ) used only when building a shared library - configure a configuring shell script (built by autoconf) - configure.in the autoconf input used to build configure - doc/Tech.Notes notes on the encoding - doc/pcre.3 man page source for the PCRE functions - doc/pcre.html HTML version - doc/pcre.txt plain text version - doc/pcreposix.3 man page source for the POSIX wrapper API - doc/pcreposix.html HTML version - doc/pcreposix.txt plain text version - doc/pcretest.txt documentation of test program - doc/perltest.txt documentation of Perl test program - doc/pcregrep.1 man page source for the pcregrep utility - doc/pcregrep.html HTML version - doc/pcregrep.txt plain text version - install-sh a shell script for installing files - ltconfig ) files used to build "libtool", - ltmain.sh ) used only when building a shared library - pcretest.c test program - perltest Perl test program - perltest8 Perl test program for UTF-8 tests - pcregrep.c source of a grep utility that uses PCRE - pcre-config.in source of script which retains PCRE information - testdata/testinput1 test data, compatible with Perl 5.004 and 5.005 - testdata/testinput2 test data for error messages and non-Perl things - testdata/testinput3 test data, compatible with Perl 5.005 - testdata/testinput4 test data for locale-specific tests - testdata/testinput5 test data for UTF-8 tests compatible with Perl 5.6 - testdata/testinput6 test data for other UTF-8 tests - testdata/testoutput1 test results corresponding to testinput1 - testdata/testoutput2 test results corresponding to testinput2 - testdata/testoutput3 test results corresponding to testinput3 - testdata/testoutput4 test results corresponding to testinput4 - testdata/testoutput5 test results corresponding to testinput5 - testdata/testoutput6 test results corresponding to testinput6 - -(C) Auxiliary files for Win32 DLL - - dll.mk - pcre.def - -Philip Hazel <ph10(a)cam.ac.uk> -August 2000 diff --git a/external/privoxy/pcre/get.c b/external/privoxy/pcre/get.c deleted file mode 100644 index 42e9bd4..0000000 --- a/external/privoxy/pcre/get.c +++ /dev/null @@ -1,227 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - - Copyright (c) 1997-2000 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - -/* This module contains some convenience functions for extracting substrings -from the subject string after a regex match has succeeded. The original idea -for these functions came from Scott Wimer <scottw(a)cgibuilder.com>. */ - - -/* Include the internals header, which itself includes Standard C headers plus -the external pcre header. */ - -#include "internal.h" - - - -/************************************************* -* Copy captured string to given buffer * -*************************************************/ - -/* This function copies a single captured substring into a given buffer. -Note that we use memcpy() rather than strncpy() in case there are binary zeros -in the string. - -Arguments: - subject the subject string that was matched - ovector pointer to the offsets table - stringcount the number of substrings that were captured - (i.e. the yield of the pcre_exec call, unless - that was zero, in which case it should be 1/3 - of the offset table size) - stringnumber the number of the required substring - buffer where to put the substring - size the size of the buffer - -Returns: if successful: - the length of the copied string, not including the zero - that is put on the end; can be zero - if not successful: - PCRE_ERROR_NOMEMORY (-6) buffer too small - PCRE_ERROR_NOSUBSTRING (-7) no such captured substring -*/ - -int -pcre_copy_substring(const char *subject, int *ovector, int stringcount, - int stringnumber, char *buffer, int size) -{ -int yield; -if (stringnumber < 0 || stringnumber >= stringcount) - return PCRE_ERROR_NOSUBSTRING; -stringnumber *= 2; -yield = ovector[stringnumber+1] - ovector[stringnumber]; -if (size < yield + 1) return PCRE_ERROR_NOMEMORY; -memcpy(buffer, subject + ovector[stringnumber], yield); -buffer[yield] = 0; -return yield; -} - - - -/************************************************* -* Copy all captured strings to new store * -*************************************************/ - -/* This function gets one chunk of store and builds a list of pointers and all -of the captured substrings in it. A NULL pointer is put on the end of the list. - -Arguments: - subject the subject string that was matched - ovector pointer to the offsets table - stringcount the number of substrings that were captured - (i.e. the yield of the pcre_exec call, unless - that was zero, in which case it should be 1/3 - of the offset table size) - listptr set to point to the list of pointers - -Returns: if successful: 0 - if not successful: - PCRE_ERROR_NOMEMORY (-6) failed to get store -*/ - -int -pcre_get_substring_list(const char *subject, int *ovector, int stringcount, - const char ***listptr) -{ -int i; -int size = sizeof(char *); -int double_count = stringcount * 2; -char **stringlist; -char *p; - -for (i = 0; i < double_count; i += 2) - size += sizeof(char *) + ovector[i+1] - ovector[i] + 1; - -stringlist = (char **)(pcre_malloc)(size); -if (stringlist == NULL) return PCRE_ERROR_NOMEMORY; - -*listptr = (const char **)stringlist; -p = (char *)(stringlist + stringcount + 1); - -for (i = 0; i < double_count; i += 2) - { - int len = ovector[i+1] - ovector[i]; - memcpy(p, subject + ovector[i], len); - *stringlist++ = p; - p += len; - *p++ = 0; - } - -*stringlist = NULL; -return 0; -} - - - -/************************************************* -* Free store obtained by get_substring_list * -*************************************************/ - -/* This function exists for the benefit of people calling PCRE from non-C -programs that can call its functions, but not free() or (pcre_free)() directly. - -Argument: the result of a previous pcre_get_substring_list() -Returns: nothing -*/ - -void -pcre_free_substring_list(const char **pointer) -{ -(pcre_free)((void *)pointer); -} - - - -/************************************************* -* Copy captured string to new store * -*************************************************/ - -/* This function copies a single captured substring into a piece of new -store - -Arguments: - subject the subject string that was matched - ovector pointer to the offsets table - stringcount the number of substrings that were captured - (i.e. the yield of the pcre_exec call, unless - that was zero, in which case it should be 1/3 - of the offset table size) - stringnumber the number of the required substring - stringptr where to put a pointer to the substring - -Returns: if successful: - the length of the string, not including the zero that - is put on the end; can be zero - if not successful: - PCRE_ERROR_NOMEMORY (-6) failed to get store - PCRE_ERROR_NOSUBSTRING (-7) substring not present -*/ - -int -pcre_get_substring(const char *subject, int *ovector, int stringcount, - int stringnumber, const char **stringptr) -{ -int yield; -char *substring; -if (stringnumber < 0 || stringnumber >= stringcount) - return PCRE_ERROR_NOSUBSTRING; -stringnumber *= 2; -yield = ovector[stringnumber+1] - ovector[stringnumber]; -substring = (char *)(pcre_malloc)(yield + 1); -if (substring == NULL) return PCRE_ERROR_NOMEMORY; -memcpy(substring, subject + ovector[stringnumber], yield); -substring[yield] = 0; -*stringptr = substring; -return yield; -} - - - -/************************************************* -* Free store obtained by get_substring * -*************************************************/ - -/* This function exists for the benefit of people calling PCRE from non-C -programs that can call its functions, but not free() or (pcre_free)() directly. - -Argument: the result of a previous pcre_get_substring() -Returns: nothing -*/ - -void -pcre_free_substring(const char *pointer) -{ -(pcre_free)((void *)pointer); -} - -/* End of get.c */ diff --git a/external/privoxy/pcre/install b/external/privoxy/pcre/install deleted file mode 100644 index 0880281..0000000 --- a/external/privoxy/pcre/install +++ /dev/null @@ -1,185 +0,0 @@ -Basic Installation -================== - - These are generic installation instructions that apply to systems that -can run the `configure' shell script - Unix systems and any that imitate -it. They are not specific to PCRE. There are PCRE-specific instructions -for non-Unix systems in the file NON-UNIX-USE. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure - -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. - -Installation Names -================== - - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: - CPU-COMPANY-SYSTEM - -See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the host type. - - If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Operation Controls -================== - - `configure' recognizes the following options to control how it -operates. - -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. - -`--help' - Print a summary of the options to `configure', and exit. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`configure' also accepts some other, not widely useful, options. diff --git a/external/privoxy/pcre/install-sh b/external/privoxy/pcre/install-sh deleted file mode 100644 index e9de238..0000000 --- a/external/privoxy/pcre/install-sh +++ /dev/null @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/external/privoxy/pcre/internal.h b/external/privoxy/pcre/internal.h deleted file mode 100644 index 25bb7f8..0000000 --- a/external/privoxy/pcre/internal.h +++ /dev/null @@ -1,381 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - - -/* This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - - Copyright (c) 1997-2000 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - -/* This header contains definitions that are shared between the different -modules, but which are not relevant to the outside. */ - -/* Get the definitions provided by running "configure" */ - -#include "config.h" - -/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(), -define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY -is set. Otherwise, include an emulating function for those systems that have -neither (there some non-Unix environments where this is the case). This assumes -that all calls to memmove are moving strings upwards in store, which is the -case in PCRE. */ - -#if ! HAVE_MEMMOVE -#undef memmove /* some systems may have a macro */ -#if HAVE_BCOPY -#define memmove(a, b, c) bcopy(b, a, c) -#else -void * -pcre_memmove(unsigned char *dest, const unsigned char *src, size_t n) -{ -int i; -dest += n; -src += n; -for (i = 0; i < n; ++i) *(--dest) = *(--src); -} -#define memmove(a, b, c) pcre_memmove(a, b, c) -#endif -#endif - -/* Standard C headers plus the external interface definition */ - -#include <ctype.h> -#include <limits.h> -#include <stddef.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include "pcre.h" - -/* In case there is no definition of offsetof() provided - though any proper -Standard C system should have one. */ - -#ifndef offsetof -#define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field)) -#endif - -/* These are the public options that can change during matching. */ - -#define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL) - -/* Private options flags start at the most significant end of the four bytes, -but skip the top bit so we can use ints for convenience without getting tangled -with negative values. The public options defined in pcre.h start at the least -significant end. Make sure they don't overlap, though now that we have expanded -to four bytes there is plenty of space. */ - -#define PCRE_FIRSTSET 0x40000000 /* first_char is set */ -#define PCRE_REQCHSET 0x20000000 /* req_char is set */ -#define PCRE_STARTLINE 0x10000000 /* start after \n for multiline */ -#define PCRE_INGROUP 0x08000000 /* compiling inside a group */ -#define PCRE_ICHANGED 0x04000000 /* i option changes within regex */ - -/* Options for the "extra" block produced by pcre_study(). */ - -#define PCRE_STUDY_MAPPED 0x01 /* a map of starting chars exists */ - -/* Masks for identifying the public options which are permitted at compile -time, run time or study time, respectively. */ - -#define PUBLIC_OPTIONS \ - (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \ - PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8) - -#define PUBLIC_EXEC_OPTIONS \ - (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY) - -#define PUBLIC_STUDY_OPTIONS 0 /* None defined */ - -/* Magic number to provide a small check against being handed junk. */ - -#define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */ - -/* Miscellaneous definitions */ - -typedef int BOOL; - -#define FALSE 0 -#define TRUE 1 - -/* These are escaped items that aren't just an encoding of a particular data -value such as \n. They must have non-zero values, as check_escape() returns -their negation. Also, they must appear in the same order as in the opcode -definitions below, up to ESC_z. The final one must be ESC_REF as subsequent -values are used for \1, \2, \3, etc. There is a test in the code for an escape -greater than ESC_b and less than ESC_X to detect the types that may be -repeated. If any new escapes are put in-between that don't consume a character, -that code will have to change. */ - -enum { ESC_A = 1, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W, ESC_w, - ESC_Z, ESC_z, ESC_REF }; - -/* Opcode table: OP_BRA must be last, as all values >= it are used for brackets -that extract substrings. Starting from 1 (i.e. after OP_END), the values up to -OP_EOD must correspond in order to the list of escapes immediately above. */ - -enum { - OP_END, /* End of pattern */ - - /* Values corresponding to backslashed metacharacters */ - - OP_SOD, /* Start of data: \A */ - OP_NOT_WORD_BOUNDARY, /* \B */ - OP_WORD_BOUNDARY, /* \b */ - OP_NOT_DIGIT, /* \D */ - OP_DIGIT, /* \d */ - OP_NOT_WHITESPACE, /* \S */ - OP_WHITESPACE, /* \s */ - OP_NOT_WORDCHAR, /* \W */ - OP_WORDCHAR, /* \w */ - OP_EODN, /* End of data or \n at end of data: \Z. */ - OP_EOD, /* End of data: \z */ - - OP_OPT, /* Set runtime options */ - OP_CIRC, /* Start of line - varies with multiline switch */ - OP_DOLL, /* End of line - varies with multiline switch */ - OP_ANY, /* Match any character */ - OP_CHARS, /* Match string of characters */ - OP_NOT, /* Match anything but the following char */ - - OP_STAR, /* The maximizing and minimizing versions of */ - OP_MINSTAR, /* all these opcodes must come in pairs, with */ - OP_PLUS, /* the minimizing one second. */ - OP_MINPLUS, /* This first set applies to single characters */ - OP_QUERY, - OP_MINQUERY, - OP_UPTO, /* From 0 to n matches */ - OP_MINUPTO, - OP_EXACT, /* Exactly n matches */ - - OP_NOTSTAR, /* The maximizing and minimizing versions of */ - OP_NOTMINSTAR, /* all these opcodes must come in pairs, with */ - OP_NOTPLUS, /* the minimizing one second. */ - OP_NOTMINPLUS, /* This first set applies to "not" single characters */ - OP_NOTQUERY, - OP_NOTMINQUERY, - OP_NOTUPTO, /* From 0 to n matches */ - OP_NOTMINUPTO, - OP_NOTEXACT, /* Exactly n matches */ - - OP_TYPESTAR, /* The maximizing and minimizing versions of */ - OP_TYPEMINSTAR, /* all these opcodes must come in pairs, with */ - OP_TYPEPLUS, /* the minimizing one second. These codes must */ - OP_TYPEMINPLUS, /* be in exactly the same order as those above. */ - OP_TYPEQUERY, /* This set applies to character types such as \d */ - OP_TYPEMINQUERY, - OP_TYPEUPTO, /* From 0 to n matches */ - OP_TYPEMINUPTO, - OP_TYPEEXACT, /* Exactly n matches */ - - OP_CRSTAR, /* The maximizing and minimizing versions of */ - OP_CRMINSTAR, /* all these opcodes must come in pairs, with */ - OP_CRPLUS, /* the minimizing one second. These codes must */ - OP_CRMINPLUS, /* be in exactly the same order as those above. */ - OP_CRQUERY, /* These are for character classes and back refs */ - OP_CRMINQUERY, - OP_CRRANGE, /* These are different to the three seta above. */ - OP_CRMINRANGE, - - OP_CLASS, /* Match a character class */ - OP_REF, /* Match a back reference */ - OP_RECURSE, /* Match this pattern recursively */ - - OP_ALT, /* Start of alternation */ - OP_KET, /* End of group that doesn't have an unbounded repeat */ - OP_KETRMAX, /* These two must remain together and in this */ - OP_KETRMIN, /* order. They are for groups the repeat for ever. */ - - /* The assertions must come before ONCE and COND */ - - OP_ASSERT, /* Positive lookahead */ - OP_ASSERT_NOT, /* Negative lookahead */ - OP_ASSERTBACK, /* Positive lookbehind */ - OP_ASSERTBACK_NOT, /* Negative lookbehind */ - OP_REVERSE, /* Move pointer back - used in lookbehind assertions */ - - /* ONCE and COND must come after the assertions, with ONCE first, as there's - a test for >= ONCE for a subpattern that isn't an assertion. */ - - OP_ONCE, /* Once matched, don't back up into the subpattern */ - OP_COND, /* Conditional group */ - OP_CREF, /* Used to hold an extraction string number */ - - OP_BRAZERO, /* These two must remain together and in this */ - OP_BRAMINZERO, /* order. */ - - OP_BRA /* This and greater values are used for brackets that - extract substrings. */ -}; - -/* The highest extraction number. This is limited by the number of opcodes -left after OP_BRA, i.e. 255 - OP_BRA. We actually set it somewhat lower. */ - -#define EXTRACT_MAX 99 - -/* The texts of compile-time error messages are defined as macros here so that -they can be accessed by the POSIX wrapper and converted into error codes. Yes, -I could have used error codes in the first place, but didn't feel like changing -just to accommodate the POSIX wrapper. */ - -#define ERR1 "\\ at end of pattern" -#define ERR2 "\\c at end of pattern" -#define ERR3 "unrecognized character follows \\" -#define ERR4 "numbers out of order in {} quantifier" -#define ERR5 "number too big in {} quantifier" -#define ERR6 "missing terminating ] for character class" -#define ERR7 "invalid escape sequence in character class" -#define ERR8 "range out of order in character class" -#define ERR9 "nothing to repeat" -#define ERR10 "operand of unlimited repeat could match the empty string" -#define ERR11 "internal error: unexpected repeat" -#define ERR12 "unrecognized character after (?" -#define ERR13 "too many capturing parenthesized sub-patterns" -#define ERR14 "missing )" -#define ERR15 "back reference to non-existent subpattern" -#define ERR16 "erroffset passed as NULL" -#define ERR17 "unknown option bit(s) set" -#define ERR18 "missing ) after comment" -#define ERR19 "too many sets of parentheses" -#define ERR20 "regular expression too large" -#define ERR21 "failed to get memory" -#define ERR22 "unmatched parentheses" -#define ERR23 "internal error: code overflow" -#define ERR24 "unrecognized character after (?<" -#define ERR25 "lookbehind assertion is not fixed length" -#define ERR26 "malformed number after (?(" -#define ERR27 "conditional group contains more than two branches" -#define ERR28 "assertion expected after (?(" -#define ERR29 "(?p must be followed by )" -#define ERR30 "unknown POSIX class name" -#define ERR31 "POSIX collating elements are not supported" -#define ERR32 "this version of PCRE is not compiled with PCRE_UTF8 support" -#define ERR33 "characters with values > 255 are not yet supported in classes" -#define ERR34 "character value in \\x{...} sequence is too large" -#define ERR35 "invalid condition (?(0)" - -/* All character handling must be done as unsigned characters. Otherwise there -are problems with top-bit-set characters and functions such as isspace(). -However, we leave the interface to the outside world as char *, because that -should make things easier for callers. We define a short type for unsigned char -to save lots of typing. I tried "uchar", but it causes problems on Digital -Unix, where it is defined in sys/types, so use "uschar" instead. */ - -typedef unsigned char uschar; - -/* The real format of the start of the pcre block; the actual code vector -runs on as long as necessary after the end. */ - -typedef struct real_pcre { - unsigned long int magic_number; - size_t size; - const unsigned char *tables; - unsigned long int options; - uschar top_bracket; - uschar top_backref; - uschar first_char; - uschar req_char; - uschar code[1]; -} real_pcre; - -/* The real format of the extra block returned by pcre_study(). */ - -typedef struct real_pcre_extra { - uschar options; - uschar start_bits[32]; -} real_pcre_extra; - - -/* Structure for passing "static" information around between the functions -doing the compiling, so that they are thread-safe. */ - -typedef struct compile_data { - const uschar *lcc; /* Points to lower casing table */ - const uschar *fcc; /* Points to case-flipping table */ - const uschar *cbits; /* Points to character type table */ - const uschar *ctypes; /* Points to table of type maps */ -} compile_data; - -/* Structure for passing "static" information around between the functions -doing the matching, so that they are thread-safe. */ - -typedef struct match_data { - int errorcode; /* As it says */ - int *offset_vector; /* Offset vector */ - int offset_end; /* One past the end */ - int offset_max; /* The maximum usable for return data */ - const uschar *lcc; /* Points to lower casing table */ - const uschar *ctypes; /* Points to table of type maps */ - BOOL offset_overflow; /* Set if too many extractions */ - BOOL notbol; /* NOTBOL flag */ - BOOL noteol; /* NOTEOL flag */ - BOOL utf8; /* UTF8 flag */ - BOOL endonly; /* Dollar not before final \n */ - BOOL notempty; /* Empty string match not wanted */ - const uschar *start_pattern; /* For use when recursing */ - const uschar *start_subject; /* Start of the subject string */ - const uschar *end_subject; /* End of the subject string */ - const uschar *start_match; /* Start of this match attempt */ - const uschar *end_match_ptr; /* Subject position at end match */ - int end_offset_top; /* Highwater mark at end of match */ -} match_data; - -/* Bit definitions for entries in the pcre_ctypes table. */ - -#define ctype_space 0x01 -#define ctype_letter 0x02 -#define ctype_digit 0x04 -#define ctype_xdigit 0x08 -#define ctype_word 0x10 /* alphameric or '_' */ -#define ctype_meta 0x80 /* regexp meta char or zero (end pattern) */ - -/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set -of bits for a class map. Some classes are built by combining these tables. */ - -#define cbit_space 0 /* [:space:] or \s */ -#define cbit_xdigit 32 /* [:xdigit:] */ -#define cbit_digit 64 /* [:digit:] or \d */ -#define cbit_upper 96 /* [:upper:] */ -#define cbit_lower 128 /* [:lower:] */ -#define cbit_word 160 /* [:word:] or \w */ -#define cbit_graph 192 /* [:graph:] */ -#define cbit_print 224 /* [:print:] */ -#define cbit_punct 256 /* [:punct:] */ -#define cbit_cntrl 288 /* [:cntrl:] */ -#define cbit_length 320 /* Length of the cbits table */ - -/* Offsets of the various tables from the base tables pointer, and -total length. */ - -#define lcc_offset 0 -#define fcc_offset 256 -#define cbits_offset 512 -#define ctypes_offset (cbits_offset + cbit_length) -#define tables_length (ctypes_offset + 256) - -/* End of internal.h */ diff --git a/external/privoxy/pcre/licence b/external/privoxy/pcre/licence deleted file mode 100644 index 34d20db..0000000 --- a/external/privoxy/pcre/licence +++ /dev/null @@ -1,46 +0,0 @@ -PCRE LICENCE ------------- - -PCRE is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - -University of Cambridge Computing Service, -Cambridge, England. Phone: +44 1223 334714. - -Copyright (c) 1997-2000 University of Cambridge - -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. In practice, this means that if you use - PCRE in software which you distribute to others, commercially or - otherwise, you must put a sentence like this - - Regular expression support is provided by the PCRE library package, - which is open source software, written by Philip Hazel, and copyright - by the University of Cambridge, England. - - somewhere reasonably visible in your documentation and in any relevant - files or online help data or similar. A reference to the ftp site for - the source, that is, to - - ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/ - - should also be given in the documentation. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. - -End diff --git a/external/privoxy/pcre/ltconfig b/external/privoxy/pcre/ltconfig deleted file mode 100644 index a01334f..0000000 --- a/external/privoxy/pcre/ltconfig +++ /dev/null @@ -1,3078 +0,0 @@ -#! /bin/sh - -# ltconfig - Create a system-specific libtool. -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord(a)gnu.ai.mit.edu>, 1996 -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A lot of this script is taken from autoconf-2.10. - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} -echo=echo -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec "$SHELL" "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit 0 -fi - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) PATH_SEPARATOR=';' ;; - *) PATH_SEPARATOR=':' ;; - esac -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" != 'X\t' || - test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running ltconfig again with it. - ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}" - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf "%s\n"' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - # Cool, printf works - : - elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && - test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL" - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' && - test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/$[\\"\\`$\\\\]$/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/$[\\"\\`\\\\]$/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# The name of this program. -progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` - -# Constants: -PROGRAM=ltconfig -PACKAGE=libtool -VERSION=1.3.4 -TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)" -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -rm="rm -f" - -help="Try \`$progname --help' for more information." - -# Global variables: -default_ofile=libtool -can_build_shared=yes -enable_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -enable_static=yes -enable_fast_install=yes -enable_dlopen=unknown -enable_win32_dll=no -ltmain= -silent= -srcdir= -ac_config_guess= -ac_config_sub= -host= -nonopt= -ofile="$default_ofile" -verify_host=yes -with_gcc=no -with_gnu_ld=no -need_locks=yes -ac_ext=c -objext=o -libext=a -exeext= -cache_file= - -old_AR="$AR" -old_CC="$CC" -old_CFLAGS="$CFLAGS" -old_CPPFLAGS="$CPPFLAGS" -old_LDFLAGS="$LDFLAGS" -old_LD="$LD" -old_LN_S="$LN_S" -old_LIBS="$LIBS" -old_NM="$NM" -old_RANLIB="$RANLIB" -old_DLLTOOL="$DLLTOOL" -old_OBJDUMP="$OBJDUMP" -old_AS="$AS" - -# Parse the command line options. -args= -prev= -for option -do - case "$option" in - -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - eval "$prev=\$option" - prev= - continue - fi - - case "$option" in - --help) cat <<EOM -Usage: $progname [OPTION]... [HOST [LTMAIN]] - -Generate a system-specific libtool script. - - --debug enable verbose shell tracing - --disable-shared do not build shared libraries - --disable-static do not build static libraries - --disable-fast-install do not optimize for fast installation - --enable-dlopen enable dlopen support - --enable-win32-dll enable building dlls on win32 hosts - --help display this help and exit - --no-verify do not verify that HOST is a valid host type --o, --output=FILE specify the output file [default=$default_ofile] - --quiet same as \`--silent' - --silent do not print informational messages - --srcdir=DIR find \`config.guess' in DIR - --version output version information and exit - --with-gcc assume that the GNU C compiler will be used - --with-gnu-ld assume that the C compiler uses the GNU linker - --disable-lock disable file locking - --cache-file=FILE configure cache file - -LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program -that provides basic libtool functionality. - -HOST is the canonical host system name [default=guessed]. -EOM - exit 0 - ;; - - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; - - --disable-shared) enable_shared=no ;; - - --disable-static) enable_static=no ;; - - --disable-fast-install) enable_fast_install=no ;; - - --enable-dlopen) enable_dlopen=yes ;; - - --enable-win32-dll) enable_win32_dll=yes ;; - - --quiet | --silent) silent=yes ;; - - --srcdir) prev=srcdir ;; - --srcdir=*) srcdir="$optarg" ;; - - --no-verify) verify_host=no ;; - - --output | -o) prev=ofile ;; - --output=*) ofile="$optarg" ;; - - --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;; - - --with-gcc) with_gcc=yes ;; - --with-gnu-ld) with_gnu_ld=yes ;; - - --disable-lock) need_locks=no ;; - - --cache-file=*) cache_file="$optarg" ;; - - -*) - echo "$progname: unrecognized option \`$option'" 1>&2 - echo "$help" 1>&2 - exit 1 - ;; - - *) - if test -z "$ltmain"; then - ltmain="$option" - elif test -z "$host"; then -# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 -# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then -# echo "$progname: warning \`$option' is not a valid host type" 1>&2 -# fi - host="$option" - else - echo "$progname: too many arguments" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac -done - -if test -z "$ltmain"; then - echo "$progname: you must specify a LTMAIN file" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -if test ! -f "$ltmain"; then - echo "$progname: \`$ltmain' does not exist" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -# Quote any args containing shell metacharacters. -ltconfig_args= -for arg -do - case "$arg" in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?]*) - ltconfig_args="$ltconfig_args '$arg'" ;; - *) ltconfig_args="$ltconfig_args $arg" ;; - esac -done - -# A relevant subset of AC_INIT. - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 5 compiler messages saved in config.log -# 6 checking for... messages and results -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>>./config.log - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi -if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi - -if test -n "$cache_file" && test -r "$cache_file"; then - echo "loading cache $cache_file within ltconfig" - . $cache_file -fi - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi(a)caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - -if test -z "$srcdir"; then - # Assume the source directory is the same one as the path to LTMAIN. - srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'` - test "$srcdir" = "$ltmain" && srcdir=. -fi - -trap "$rm conftest*; exit 1" 1 2 15 -if test "$verify_host" = yes; then - # Check for config.guess and config.sub. - ac_aux_dir= - for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/config.guess; then - ac_aux_dir=$ac_dir - break - fi - done - if test -z "$ac_aux_dir"; then - echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 - echo "$help" 1>&2 - exit 1 - fi - ac_config_guess=$ac_aux_dir/config.guess - ac_config_sub=$ac_aux_dir/config.sub - - # Make sure we can run config.sub. - if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then : - else - echo "$progname: cannot run $ac_config_sub" 1>&2 - echo "$help" 1>&2 - exit 1 - fi - - echo $ac_n "checking host system type""... $ac_c" 1>&6 - - host_alias=$host - case "$host_alias" in - "") - if host_alias=`$SHELL $ac_config_guess`; then : - else - echo "$progname: cannot guess host type; you must specify one" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac - host=`$SHELL $ac_config_sub $host_alias` - echo "$ac_t$host" 1>&6 - - # Make sure the host verified. - test -z "$host" && exit 1 - -elif test -z "$host"; then - echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 - echo "$help" 1>&2 - exit 1 -else - host_alias=$host -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case "$host_os" in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^$.*-.*-linux$$.*$$/\1-gnu\2/'` -esac - -host_cpu=`echo $host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'` -host_vendor=`echo $host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'` -host_os=`echo $host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'` - -case "$host_os" in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR cru $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -# Set a sane default for `AR'. -test -z "$AR" && AR=ar - -# Set a sane default for `OBJDUMP'. -test -z "$OBJDUMP" && OBJDUMP=objdump - -# If RANLIB is not set, then run the test. -if test "${RANLIB+set}" != "set"; then - result=no - - echo $ac_n "checking for ranlib... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then - RANLIB="ranlib" - result="ranlib" - break - fi - done - IFS="$save_ifs" - - echo "$ac_t$result" 1>&6 -fi - -if test -n "$RANLIB"; then - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" -fi - -# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin. -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$AS" && AS=as - -# Check to see if we are using GCC. -if test "$with_gcc" != yes || test -z "$CC"; then - # If CC is not set, then try to find GCC or a usable CC. - if test -z "$CC"; then - echo $ac_n "checking for gcc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then - CC="gcc" - break - fi - done - IFS="$save_ifs" - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - fi - - # Not "gcc", so try "cc", rejecting "/usr/ucb/cc". - if test -z "$CC"; then - echo $ac_n "checking for cc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - cc_rejected=no - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/cc || test -f $dir/cc$ac_exeext; then - if test "$dir/cc" = "/usr/ucb/cc"; then - cc_rejected=yes - continue - fi - CC="cc" - break - fi - done - IFS="$save_ifs" - if test $cc_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same name, so the bogon will be chosen - # first if we set CC to just the name; use the full file name. - shift - set dummy "$dir/cc" "$@" - shift - CC="$@" - fi - fi - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$CC"; then - echo "$progname: error: no acceptable cc found in \$PATH" 1>&2 - exit 1 - fi - fi - - # Now see if the compiler is really GCC. - with_gcc=no - echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6 - echo "$progname:581: checking whether we are using GNU C" >&5 - - $rm conftest.c - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF - if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - with_gcc=yes - fi - $rm conftest.c - echo "$ac_t$with_gcc" 1>&6 -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo $ac_n "checking for object suffix... $ac_c" 1>&6 -$rm conftest* -echo 'int i = 1;' > conftest.c -echo "$progname:603: checking for object suffix" >& 5 -if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - for ac_file in conftest.*; do - case $ac_file in - *.c) ;; - *) objext=`echo $ac_file | sed -e s/conftest.//` ;; - esac - done -else - cat conftest.err 1>&5 - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 -fi -$rm conftest* -echo "$ac_t$objext" 1>&6 - -echo $ac_n "checking for executable suffix... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_exeext="no" - $rm conftest* - echo 'main () { return 0; }' > conftest.c - echo "$progname:629: checking for executable suffix" >& 5 - if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - for ac_file in conftest.*; do - case $ac_file in - *.c | *.err | *.$objext ) ;; - *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;; - esac - done - else - cat conftest.err 1>&5 - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - $rm conftest* -fi -if test "X$ac_cv_exeext" = Xno; then - exeext="" -else - exeext="$ac_cv_exeext" -fi -echo "$ac_t$ac_cv_exeext" 1>&6 - -echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 -pic_flag= -special_shlib_compile_flags= -wl= -link_static_flag= -no_builtin_flag= - -if test "$with_gcc" = yes; then - wl='-Wl,' - link_static_flag='-static' - - case "$host_os" in - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # we not sure about C++ programs. - link_static_flag="$link_static_flag ${wl}-lC" - ;; - cygwin* | mingw* | os2*) - # We can build DLLs from non-PIC. - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - pic_flag='-m68020 -resident32 -malways-restore-a4' - ;; - sysv4*MP*) - if test -d /usr/nec; then - pic_flag=-Kconform_pic - fi - ;; - *) - pic_flag='-fPIC' - ;; - esac -else - # PORTME Check for PIC flags for the system compiler. - case "$host_os" in - aix3* | aix4*) - # All AIX code is PIC. - link_static_flag='-bnso -bI:/lib/syscalls.exp' - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better link_static_flag that works with the bundled CC? - wl='-Wl,' - link_static_flag="${wl}-a ${wl}archive" - pic_flag='+Z' - ;; - - irix5* | irix6*) - wl='-Wl,' - link_static_flag='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | os2*) - # We can build DLLs from non-PIC. - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - wl='-Wl,' - link_static_flag='-non_shared' - ;; - - sco3.2v5*) - pic_flag='-Kpic' - link_static_flag='-dn' - special_shlib_compile_flags='-belf' - ;; - - solaris*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - sunos4*) - pic_flag='-PIC' - link_static_flag='-Bstatic' - wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - uts4*) - pic_flag='-pic' - link_static_flag='-Bstatic' - ;; - sysv4*MP*) - if test -d /usr/nec ;then - pic_flag='-Kconform_pic' - link_static_flag='-Bstatic' - fi - ;; - *) - can_build_shared=no - ;; - esac -fi - -if test -n "$pic_flag"; then - echo "$ac_t$pic_flag" 1>&6 - - # Check to make sure the pic_flag actually works. - echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $pic_flag -DPIC" - echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5 - if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - case "$host_os" in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then they - # create non-PIC objects. So, if there were any warnings, we assume that - # PIC is not supported. - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - can_build_shared=no - pic_flag= - else - echo "$ac_t"yes 1>&6 - pic_flag=" $pic_flag" - fi - ;; - *) - echo "$ac_t"yes 1>&6 - pic_flag=" $pic_flag" - ;; - esac - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - can_build_shared=no - pic_flag= - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* -else - echo "$ac_t"none 1>&6 -fi - -# Check to see if options -o and -c are simultaneously supported by compiler -echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6 -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -$rm conftest* -echo "int some_variable = 0;" > conftest.c -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.o" -echo "$progname:829: checking if $compiler supports -c -o file.o" >&5 -if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - echo "$ac_t"no 1>&6 - compiler_c_o=no - else - echo "$ac_t"yes 1>&6 - compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - compiler_c_o=no - echo "$ac_t"no 1>&6 -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5 -if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - compiler_o_lo=no - else - echo "$ac_t"yes 1>&6 - compiler_o_lo=yes - fi - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - compiler_o_lo=no - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$ac_t$hard_links" 1>&6 - $rm conftest* - if test "$hard_links" = no; then - echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2 - need_locks=warn - fi -else - need_locks=no -fi - -if test "$with_gcc" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6 - $rm conftest* - echo "int some_variable = 0;" > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c" - echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 - if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then - - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - compiler_rtti_exceptions=no - else - echo "$ac_t"yes 1>&6 - compiler_rtti_exceptions=yes - fi - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - compiler_rtti_exceptions=no - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi - -fi - -# Check for any special shared library compilation flags. -if test -n "$special_shlib_compile_flags"; then - echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2 - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then : - else - echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2 - can_build_shared=no - fi -fi - -echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6 -$rm conftest* -echo 'main(){return(0);}' > conftest.c -save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $link_static_flag" -echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5 -if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - echo "$ac_t$link_static_flag" 1>&6 -else - echo "$ac_t"none 1>&6 - link_static_flag= -fi -LDFLAGS="$save_LDFLAGS" -$rm conftest* - -if test -z "$LN_S"; then - # Check to see if we can use ln -s, or we need hard links. - echo $ac_n "checking whether ln -s works... $ac_c" 1>&6 - $rm conftest.dat - if ln -s X conftest.dat 2>/dev/null; then - $rm conftest.dat - LN_S="ln -s" - else - LN_S=ln - fi - if test "$LN_S" = "ln -s"; then - echo "$ac_t"yes 1>&6 - else - echo "$ac_t"no 1>&6 - fi -fi - -# Make sure LD is an absolute path. -if test -z "$LD"; then - ac_prog=ld - if test "$with_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6 - echo "$progname:991: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we are not using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac - elif test "$with_gnu_ld" = yes; then - echo $ac_n "checking for GNU ld... $ac_c" 1>&6 - echo "$progname:1015: checking for GNU ld" >&5 - else - echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 - echo "$progname:1018: checking for non-GNU ld" >&5 - fi - - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" - fi - - if test -n "$LD"; then - echo "$ac_t$LD" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$LD"; then - echo "$progname: error: no acceptable ld found in \$PATH" 1>&2 - exit 1 - fi -fi - -# Check to see if it really is or is not GNU ld. -echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6 -# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then - with_gnu_ld=yes -else - with_gnu_ld=no -fi -echo "$ac_t$with_gnu_ld" 1>&6 - -# See if the linker supports building shared libraries. -echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. - -case "$host_os" in -cygwin* | mingw*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$with_gcc" != yes; then - with_gnu_ld=no - fi - ;; - -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case "$host_os" in - aix3* | aix4*) - # On AIX, the GNU linker is very broken - ld_shlibs=no - cat <<EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II <kc5tja(a)dolphin.openprojects.net> reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach <jrb3(a)best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ - test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~ - $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols' - - archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~ - _lt_hint=1; - for symbol in `cat $export_symbols`; do - echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def; - _lt_hint=`expr 1 + \$_lt_hint`; - done~ - test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~ - test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~ - $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ - $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~ - $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts' - - old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib' - # can we support soname and/or expsyms with a.out? -oliva - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case "$host_os" in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$with_gcc" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4*) - hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib' - hardcode_libdir_separator=':' - if test "$with_gcc" = yes; then - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - shared_flag='-shared' - else - shared_flag='${wl}-bM:SRE' - hardcode_direct=yes - fi - allow_undefined_flag=' ${wl}-berok' - archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}' - archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}' - case "$host_os" in aix4.[01]|aix4.[01].*) - # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on - always_export_symbols=yes ;; - esac - ;; - - amigaos*) - archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs' - fix_srcfile_path='`cygpath -w $srcfile`' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case "$host_os" in - hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$with_gcc" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts' # ELF - fi - hardcode_libdir_flag_spec='${wl}-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - openbsd*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def' - ;; - - osf3*) - if test "$with_gcc" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # As osf3* with the addition of the -msym flag - if test "$with_gcc" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case "$host_os" in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - unixware7*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -echo "$ac_t$ld_shlibs" 1>&6 -test "$ld_shlibs" = no && can_build_shared=no - -if test -z "$NM"; then - echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6 - case "$NM" in - [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path. - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" - for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -p" - break - else - NM=${NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$NM" && NM=nm - ;; - esac - echo "$ac_t$NM" 1>&6 -fi - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='$[_A-Za-z][_A-Za-z0-9]*$' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* $.*$$/extern char \1;/p'" - -# Define system-specific variables. -case "$host_os" in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern char \1();/p' -e 's/^. .* $.*$$/extern char \1;/p'" - ;; -irix*) - symcode='[BCDEGRST]' - ;; -solaris*) - symcode='[BDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$[ ][ ]*$$ac_symprfx$$sympat$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - $rm conftest* - cat > conftest.c <<EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(){} -#ifdef __cplusplus -} -#endif -main(){nm_test_var='a';nm_test_func();return(0);} -EOF - - echo "$progname:1635: checking if global_symbol_pipe works" >&5 - if { (eval echo $progname:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then - # Now try to grab the symbols. - nlist=conftest.nm - if { echo "$progname:1639: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then - - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat <<EOF > conftest.c -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c' - - cat <<EOF >> conftest.c -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{ -EOF - sed 's/^. $.*$ $.*$$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c - cat <<\EOF >> conftest.c - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$objext conftstm.$objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo $progname:1691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - pipe_works=yes - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - LIBS="$save_LIBS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - $rm conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - global_symbol_pipe= - fi -done -if test "$pipe_works" = yes; then - echo "${ac_t}ok" 1>&6 -else - echo "${ac_t}failed" 1>&6 -fi - -if test -z "$global_symbol_pipe"; then - global_symbol_to_cdecl= -fi - -# Check hardcoding attributes. -echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$ac_t$hardcode_action" 1>&6 - - -reload_flag= -reload_cmds='$LD$reload_flag -o $output$reload_objs' -echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6 -# PORTME Some linkers may need a different reload flag. -reload_flag='-r' -echo "$ac_t$reload_flag" 1>&6 -test -n "$reload_flag" && reload_flag=" $reload_flag" - -# PORTME Fill in your ld.so characteristics -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -file_magic_cmd= -file_magic_test_file= -deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [regex]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. -echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 -case "$host_os" in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4*) - version_type=linux - # AIX has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - # We preserve .a as extension for shared libraries though AIX4.2 - # and later linker supports .so - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a' - shlibpath_var=LIBPATH - deplibs_check_method=pass_all - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - deplibs_check_method=pass_all - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - file_magic_cmd=/usr/bin/file - file_magic_test_file=/shlib/libc.so - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw*) - version_type=windows - need_version=no - need_lib_prefix=no - if test "$with_gcc" = yes; then - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a' - else - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - fi - dynamic_linker='Win32 ld.exe' - deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - file_magic_cmd='${OBJDUMP} -f' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case "$version_type" in - freebsd-elf*) - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /usr/lib/libc.so*` - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - deplibs_check_method=unknown - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case "$host_os" in - freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so.$major' - library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so' - case "$host_os" in - irix5*) - libsuff= shlibsuff= - # this will be overridden with pass_all, but let us keep it just in case - deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case "$LD" in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /lib${libsuff}/libc.so*` - deplibs_check_method='pass_all' - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - - if test -f /lib/ld.so.1; then - dynamic_linker='GNU ld.so' - else - # Only the GNU ld.so supports shared libraries on MkLinux. - case "$host_cpu" in - powerpc*) dynamic_linker=no ;; - *) dynamic_linker='Linux ld.so' ;; - esac - fi - ;; - -netbsd*) - version_type=sunos - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - ;; - -openbsd*) - version_type=sunos - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - need_version=no - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - # this will be overridden with pass_all, but let us keep it just in case - deplibs_check_method='file_magic COFF format alpha shared library' - file_magic_cmd=/usr/bin/file - file_magic_test_file=/shlib/libc.so - deplibs_check_method='pass_all' - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib" - file_magic_cmd=/usr/bin/file - file_magic_test_file=/lib/libc.so - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case "$host_vendor" in - ncr) - deplibs_check_method='pass_all' - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - file_magic_cmd=/usr/bin/file - file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$ac_t$dynamic_linker" 1>&6 -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 - -# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in -# configure.in, otherwise build static only libraries. -case "$host_os" in -cygwin* | mingw* | os2*) - if test x$can_build_shared = xyes; then - test x$enable_win32_dll = xno && can_build_shared=no - echo "checking if package supports dlls... $can_build_shared" 1>&6 - fi -;; -esac - -if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then - case "$deplibs_check_method" in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic $.*$\"`" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <<EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool(a)gnu.org - -EOF - fi ;; - esac -fi - -echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - test "$enable_shared" = yes && enable_static=no - ;; -esac - -echo "$ac_t$enable_shared" 1>&6 - -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes - -echo "checking whether to build static libraries... $enable_static" 1>&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -echo $ac_n "checking for objdir... $ac_c" 1>&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$ac_t$objdir" 1>&6 - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else -if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then - lt_cv_dlopen=no lt_cv_dlopen_libs= -echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 -echo "$progname:2212: checking for dlopen in -ldl" >&5 -ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldl $LIBS" -cat > conftest.$ac_ext <<EOF -#line 2220 "ltconfig" -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen(); - -int main() { -dlopen() -; return 0; } -EOF -if { (eval echo $progname:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for dlopen""... $ac_c" 1>&6 -echo "$progname:2252: checking for dlopen" >&5 -if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2257 "ltconfig" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -dlopen(); -#endif - -; return 0; } -EOF -if { (eval echo $progname:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_dlopen=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_dlopen=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dlopen" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 -echo "$progname:2299: checking for dld_link in -ldld" >&5 -ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldld $LIBS" -cat > conftest.$ac_ext <<EOF -#line 2307 "ltconfig" -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link(); - -int main() { -dld_link() -; return 0; } -EOF -if { (eval echo $progname:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for shl_load""... $ac_c" 1>&6 -echo "$progname:2339: checking for shl_load" >&5 -if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2344 "ltconfig" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -shl_load(); -#endif - -; return 0; } -EOF -if { (eval echo $progname:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_shl_load=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_shl_load=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="shl_load" -else - echo "$ac_t""no" 1>&6 -echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 -echo "$progname:2387: checking for shl_load in -ldld" >&5 -ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldld $LIBS" -cat > conftest.$ac_ext <<EOF -#line 2395 "ltconfig" -#include "confdefs.h" -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load(); - -int main() { -shl_load() -; return 0; } -EOF -if { (eval echo $progname:2409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - echo "$ac_t""no" 1>&6 -fi - - -fi - - -fi - - -fi - - -fi - -fi - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - fi - - case "$lt_cv_dlopen" in - dlopen) -for ac_hdr in dlfcn.h; do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "$progname:2452: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2457 "ltconfig" -#include <$ac_hdr> -int fnord = 0; -EOF -ac_try="$ac_compile >/dev/null 2>conftest.out" -{ (eval echo $progname:2462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi -done - - if test "x$ac_cv_header_dlfcn_h" = xyes; then - CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - fi - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 -echo "$progname:2490: checking whether a program can dlopen itself" >&5 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - lt_cv_dlopen_self=cross - else - cat > conftest.c <<EOF -#line 2498 "ltconfig" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LTDL_GLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LTDL_GLOBAL DL_GLOBAL -# else -# define LTDL_GLOBAL 0 -# endif -#endif - -/* We may have to define LTDL_LAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LTDL_LAZY_OR_NOW -# ifdef RTLD_LAZY -# define LTDL_LAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LTDL_LAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LTDL_LAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LTDL_LAZY_OR_NOW DL_NOW -# else -# define LTDL_LAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -fnord() { int i=42;} -main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); - if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); - if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } - -EOF -if { (eval echo $progname:2544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - lt_cv_dlopen_self=yes -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - lt_cv_dlopen_self=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$lt_cv_dlopen_self" 1>&6 - - if test "$lt_cv_dlopen_self" = yes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 -echo "$progname:2563: checking whether a statically linked program can dlopen itself" >&5 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - lt_cv_dlopen_self_static=cross - else - cat > conftest.c <<EOF -#line 2571 "ltconfig" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LTDL_GLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LTDL_GLOBAL DL_GLOBAL -# else -# define LTDL_GLOBAL 0 -# endif -#endif - -/* We may have to define LTDL_LAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LTDL_LAZY_OR_NOW -# ifdef RTLD_LAZY -# define LTDL_LAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LTDL_LAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LTDL_LAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LTDL_LAZY_OR_NOW DL_NOW -# else -# define LTDL_LAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -fnord() { int i=42;} -main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); - if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); - if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } - -EOF -if { (eval echo $progname:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - lt_cv_dlopen_self_static=yes -else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - lt_cv_dlopen_self_static=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 -fi - ;; - esac - - case "$lt_cv_dlopen_self" in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case "$lt_cv_dlopen_self_static" in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - -# Copy echo and quote the copy, instead of the original, because it is -# used later. -ltecho="$echo" -if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ltecho="$CONFIG_SHELL \$0 --fallback-echo" -fi -LTSHELL="$SHELL" - -LTCONFIG_VERSION="$VERSION" - -# Only quote variables if we're using ltmain.sh. -case "$ltmain" in -*.sh) - # Now quote all the things that may contain metacharacters. - for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \ - old_LD old_LDFLAGS old_LIBS \ - old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \ - AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \ - file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case "$var" in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case "$ltecho" in - *'\$0 --fallback-echo"') - ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - - trap "$rm \"$ofile\"; exit 1" 1 2 15 - echo "creating $ofile" - $rm "$ofile" - cat <<EOF > "$ofile" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. -# -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord(a)gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -### BEGIN LIBTOOL CONFIG -EOF - cfgfile="$ofile" - ;; - -*) - # Double-quote the variables that need it (for aesthetics). - for var in old_CC old_CFLAGS old_CPPFLAGS \ - old_LD old_LDFLAGS old_LIBS \ - old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do - eval "$var=\\\"\$var\\\"" - done - - # Just create a config file. - cfgfile="$ofile.cfg" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - echo "creating $cfgfile" - $rm "$cfgfile" - cat <<EOF > "$cfgfile" -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -EOF - ;; -esac - -cat <<EOF >> "$cfgfile" -# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\ -# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\ -# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\ -# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\ -# $0$ltconfig_args -# -# Compiler and other test output produced by $progname, useful for -# debugging $progname, is in ./config.log if it exists. - -# The version of $progname that generated this script. -LTCONFIG_VERSION=$LTCONFIG_VERSION - -# Shell to use when invoking shell scripts. -SHELL=$LTSHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$ltecho - -# The archiver. -AR=$AR - -# The default C compiler. -CC=$CC - -# The linker used to build libraries. -LD=$LD - -# Whether we need hard or soft links. -LN_S=$LN_S - -# A BSD-compatible nm program. -NM=$NM - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$reload_flag -reload_cmds=$reload_cmds - -# How to pass a linker flag through the compiler. -wl=$wl - -# Object file suffix (normally "o"). -objext="$objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$pic_flag - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$RANLIB -old_archive_cmds=$old_archive_cmds -old_postinstall_cmds=$old_postinstall_cmds -old_postuninstall_cmds=$old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$old_archive_from_new_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$archive_cmds -archive_expsym_cmds=$archive_expsym_cmds -postinstall_cmds=$postinstall_cmds -postuninstall_cmds=$postuninstall_cmds - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$global_symbol_to_cdecl - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$include_expsyms - -EOF - -case "$ltmain" in -*.sh) - echo '### END LIBTOOL CONFIG' >> "$ofile" - echo >> "$ofile" - case "$host_os" in - aix3*) - cat <<\EOF >> "$ofile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # Append the ltmain.sh script. - sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1) - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - - chmod +x "$ofile" - ;; - -*) - # Compile the libtool program. - echo "FIXME: would compile $ltmain" - ;; -esac - -test -n "$cache_file" || exit 0 - -# AC_CACHE_SAVE -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\$[a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\$=\$.*\$/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^$[a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*$=$.*$/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/external/privoxy/pcre/ltmain.sh b/external/privoxy/pcre/ltmain.sh deleted file mode 100644 index ab65054..0000000 --- a/external/privoxy/pcre/ltmain.sh +++ /dev/null @@ -1,4012 +0,0 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun ltconfig. -# -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord(a)gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit 0 -fi - -# The name of this program. -progname=`$echo "$0" | sed 's%^.*/%%'` -modename="$progname" - -# Constants. -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.3.4 -TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)" - -default_mode= -help="Try \`$progname --help' for more information." -magic="%%%MAGIC variable%%%" -mkdir="mkdir" -mv="mv -f" -rm="rm -f" - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/$[\\`\\"$\\\\]$/\\\1/g' -SP2NL='tr \040 \012' -NL2SP='tr \015\012 \040\040' - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -# We save the old values to restore during execute mode. -if test "${LC_ALL+set}" = set; then - save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL -fi -if test "${LANG+set}" = set; then - save_LANG="$LANG"; LANG=C; export LANG -fi - -if test "$LTCONFIG_VERSION" != "$VERSION"; then - echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - echo "$modename: not configured to build any kind of library" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" - -# Parse our command line options once, thoroughly. -while test $# -gt 0 -do - arg="$1" - shift - - case "$arg" in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - execute_dlfiles) - eval "$prev=\"\$$prev \$arg\"" - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case "$arg" in - --help) - show_help=yes - ;; - - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - exit 0 - ;; - - --config) - sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 - exit 0 - ;; - - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; - - --dry-run | -n) - run=: - ;; - - --features) - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - exit 0 - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --quiet | --silent) - show=: - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - case "$nonopt" in - *cc | *++ | gcc* | *-gcc*) - mode=link - for arg - do - case "$arg" in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case "$mode" in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - lastarg= - srcfile="$nonopt" - suppress_output= - - user_target=no - for arg - do - # Accept any command-line options. - case "$arg" in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next - ;; - - -static) - build_old_libs=yes - continue - ;; - esac - - case "$user_target" in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue - ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" - - # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly in scan - # sets, so we specify it separately. - case "$lastarg" in - *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) - lastarg="\"$lastarg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done - - case "$user_target" in - set) - ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSfmso]' - case "$libobj" in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case "$libobj" in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 - ;; - esac - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $libobj" - else - removelist="$libobj" - fi - - $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 - else - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until ln "$0" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - echo $srcfile > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" - if test "$build_old_libs" = yes; then - lo_libobj="$libobj" - dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$libobj"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - - if test -d "$dir"; then - $show "$rm $libobj" - $run $rm $libobj - else - $show "$mkdir $dir" - $run $mkdir $dir - status=$? - if test $status -ne 0 && test ! -d $dir; then - exit $status - fi - fi - fi - if test "$compiler_o_lo" = yes; then - output_obj="$libobj" - command="$command -o $output_obj" - elif test "$compiler_c_o" = yes; then - output_obj="$obj" - command="$command -o $output_obj" - fi - - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - test -n "$output_obj" && $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed, then go on to compile the next one - if test x"$output_obj" != x"$libobj"; then - $show "$mv $output_obj $libobj" - if $run $mv $output_obj $libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # If we have no pic_flag, then copy the object into place and finish. - if test -z "$pic_flag" && test "$build_old_libs" = yes; then - # Rename the .lo from within objdir to obj - if test -f $obj; then - $show $rm $obj - $run $rm $obj - fi - - $show "$mv $libobj $obj" - if $run $mv $libobj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` - libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - # Now arrange that obj and lo_libobj become the same file - $show "(cd $xdir && $LN_S $baseobj $libobj)" - if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then - exit 0 - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Allow error messages only from the first compilation. - suppress_output=' >/dev/null 2>&1' - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - command="$base_compile $srcfile" - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - output_obj="$obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed - if test x"$output_obj" != x"$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? - else - # Move the .lo from within objdir - $show "$mv $libobj $lo_libobj" - if $run $mv $libobj $lo_libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - fi - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $rm "$lockfile" - fi - - exit 0 - ;; - - # libtool link mode - link) - modename="$modename: link" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invokation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include <windows.h> -# #undef WIN32_LEAN_AND_MEAN -# #include <stdio.h> -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include <cygwin/cygwin_dll.h> -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include <stdio.h> /* for printf() */ -# #include <unistd.h> /* for open(), lseek(), read() */ -# #include <fcntl.h> /* for O_RDONLY, O_BINARY */ -# #include <string.h> /* for strdup() */ -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (!dll) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i<nexp; i++) -# { -# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4); -# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i); -# } -# -# return 0; -# } -# /* impgen.c ends here */ - ;; - *) - allow_undefined=yes - ;; - esac - compile_command="$nonopt" - finalize_command="$nonopt" - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - linkopts= - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - lib_search_path= - fi - # now prepend the system-specific ones - eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - avoid_version=no - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - link_against_libtool_libs= - ltlibs= - module=no - objs= - prefer_static_libs=no - preload=no - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - - # We need to know -static, to get the right output filenames. - for arg - do - case "$arg" in - -all-static | -static) - if test "X$arg" = "X-all-static"; then - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - else - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - fi - build_libtool_libs=no - build_old_libs=yes - prefer_static_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test $# -gt 0; do - arg="$1" - shift - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case "$prev" in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case "$arg" in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit 1 - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case "$arg" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi - - prevarg="$arg" - - case "$arg" in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: not more than one -exported-symbols argument allowed" - exit 1 - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case "$dir" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" - fi - dir="$absdir" - ;; - esac - case " $deplibs " in - *" $arg "*) ;; - *) deplibs="$deplibs $arg";; - esac - case " $lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir";; - esac - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - case ":$dllsearchpath:" in - ::) dllsearchpath="$dllsearchdir";; - *":$dllsearchdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dllsearchdir";; - esac - ;; - esac - ;; - - -l*) - if test "$arg" = "-lc"; then - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # These systems don't actually have c library (as such) - continue - ;; - esac - elif test "$arg" = "-lm"; then - case "$host" in - *-*-cygwin* | *-*-beos*) - # These systems don't actually have math library (as such) - continue - ;; - esac - fi - deplibs="$deplibs $arg" - ;; - - -module) - module=yes - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -o) prev=output ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case "$dir" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -static) - # If we have no pic_flag, then this is the same as -all-static. - if test -z "$pic_flag" && test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - - *.o | *.obj | *.a | *.lib) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A library object. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` - prev= - fi - libobjs="$libobjs $arg" - ;; - - *.la) - # A libtool-controlled library. - - dlname= - libdir= - library_names= - old_library= - - # Check to see that this really is a libtool archive. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 - exit 1 - fi - - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # Read the .la file - # If there is no directory component, then add one. - case "$arg" in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 - exit 1 - fi - - # Find the relevant object directory and library name. - name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` - - if test "X$installed" = Xyes; then - dir="$libdir" - else - dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$arg"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - fi - - if test -n "$dependency_libs"; then - # Extract -R and -L from dependency_libs - temp_deplibs= - for deplib in $dependency_libs; do - case "$deplib" in - -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $rpath $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - -L*) case "$compile_command $temp_deplibs " in - *" $deplib "*) ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'` - case " $lib_search_path " in - *" $temp_dir "*) ;; - *) lib_search_path="$lib_search_path $temp_dir";; - esac - ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - done - dependency_libs="$temp_deplibs" - fi - - if test -z "$libdir"; then - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$deplibs$dependency_libs" - compile_command="$compile_command $dir/$old_library$dependency_libs" - finalize_command="$finalize_command $dir/$old_library$dependency_libs" - continue - fi - - # This library was specified with -dlopen. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking statically, - # we need to preload. - prev=dlprefiles - else - # We should not create a dependency on this library, but we - # may need any libraries it requires. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - prev= - continue - fi - fi - - # The library was specified with -dlpreopen. - if test "$prev" = dlprefiles; then - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - dlprefiles="$dlprefiles $dir/$old_library" - else - dlprefiles="$dlprefiles $dir/$linklib" - fi - prev= - fi - - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - link_against_libtool_libs="$link_against_libtool_libs $arg" - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # We need an absolute path. - case "$dir" in - [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" - fi - ;; - esac - - # This is the magic to use -rpath. - # Skip directories that are in the system default run-time - # search path, unless they have been requested with -R. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - - lib_linked=yes - case "$hardcode_action" in - immediate | unsupported) - if test "$hardcode_direct" = no; then - compile_command="$compile_command $dir/$linklib" - deplibs="$deplibs $dir/$linklib" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - if test -n "$dllsearchpath"; then - dllsearchpath="$dllsearchpath:$dllsearchdir" - else - dllsearchpath="$dllsearchdir" - fi - ;; - esac - elif test "$hardcode_minus_L" = no; then - case "$host" in - *-*-sunos*) - compile_shlibpath="$compile_shlibpath$dir:" - ;; - esac - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = no; then - case ":$compile_shlibpath:" in - *":$dir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$dir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - relink) - if test "$hardcode_direct" = yes; then - compile_command="$compile_command $absdir/$linklib" - deplibs="$deplibs $absdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$compile_command " in - *" -L$absdir "*) ;; - *) compile_command="$compile_command -L$absdir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$absdir -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$compile_shlibpath:" in - *":$absdir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$absdir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - *) - lib_linked=no - ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - finalize_command="$finalize_command $libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$finalize_command " in - *" -L$libdir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$finalize_shlibpath:" in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:";; - esac - finalize_command="$finalize_command -l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - fi - else - # Transform directly to old archives if we don't build new libraries. - if test -n "$pic_flag" && test -z "$old_library"; then - $echo "$modename: cannot find static library for \`$arg'" 1>&2 - exit 1 - fi - - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_command="$compile_command $dir/$linklib" - finalize_command="$finalize_command $dir/$linklib" - else - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$dir";; - esac - finalize_command="$finalize_command -l$name" - fi - fi - - # Add in any libraries that this one depends upon. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - esac - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - case "$output" in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *.a | *.lib) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 - exit 1 - fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi - - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - ;; - - *.la) - # Make sure we only generate libraries of the form `libNAME.la'. - case "$outputname" in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - if test -n "$objs"; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 - exit 1 - fi - - # How the heck are we supposed to write a wrapper for a shared library? - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 - exit 1 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 - fi - - set dummy $rpath - if test $# -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - libext=al - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - dependency_libs="$deplibs" - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else - - # Parse the version information argument. - IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" - - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - current="$2" - revision="$3" - age="$4" - - # Check that each of the things are valid numbers. - case "$current" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$revision" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$age" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - if test $age -gt $current; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case "$version_type" in - none) ;; - - irix) - major=`expr $current - $age + 1` - versuffix="$major.$revision" - verstring="sgi$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test $loop != 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="sgi$major.$iface:$verstring" - done - ;; - - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - major=`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test $loop != 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - - windows) - # Like Linux, but with '-' rather than '.', since we only - # want one extension on Windows 95. - major=`expr $current - $age` - versuffix="-$major-$age-$revision" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - verstring="0.0" - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - dependency_libs="$deplibs" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *) - # Add libc to deplibs on all other systems. - deplibs="$deplibs -lc" - ;; - esac - fi - - # Create the output directory, or remove our outputs if we need to. - if test -d $output_objdir; then - $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" - $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* - else - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - if test "$build_libtool_libs" = yes; then - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case "$deplibs_check_method" in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c <<EOF - int main() { return 0; } -EOF - $rm conftest - $CC -o conftest conftest.c $deplibs - if test $? -eq 0 ; then - ldd_output=`ldd conftest` - for i in $deplibs; do - name="`expr $i : '-l$.*$'`" - # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - fi - else - newdeplibs="$newdeplibs $i" - fi - done - else - # Error occured in the first compile. Let's try to salvage the situation: - # Compile a seperate program for each library. - for i in $deplibs; do - name="`expr $i : '-l$.*$'`" - # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then - $rm conftest - $CC -o conftest conftest.c $i - # Did it work? - if test $? -eq 0 ; then - ldd_output=`ldd conftest` - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - fi - else - droppeddeps=yes - echo - echo "*** Warning! Library $i is needed by this library but I was not able to" - echo "*** make it link in! You will probably need to install it or some" - echo "*** library that it depends on before this library will be fully" - echo "*** functional. Installing it before continuing would be even better." - fi - else - newdeplibs="$newdeplibs $i" - fi - done - fi - ;; - file_magic*) - set dummy $deplibs_check_method - file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 $.*$\"`" - for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l$.*$'`" - # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | sed 's/.* -> //'` - case "$potliblink" in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | sed 10q \ - | egrep "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo - if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - # Get the real and link names of the library. - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - lib="$output_objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) in case we are running --disable-static - for obj in $libobjs; do - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - if test ! -f $xdir/$oldobj; then - $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" - $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? - fi - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case "$xlib" in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linkopts="$linkopts $flag" - fi - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - *.lo | *.o | *.obj) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 - exit 1 - fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi - - case "$output" in - *.lo) - if test -n "$objs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case "$xlib" in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - # Create the old-style object. - reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" - - output="$obj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 - fi - - if test -n "$pic_flag"; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - else - # Just create a symlink. - $show $rm $libobj - $run $rm $libobj - xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$libobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - $show "(cd $xdir && $LN_S $oldobj $baseobj)" - $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? - fi - - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - ;; - - # Anything else should be a program. - *) - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$compile_rpath " in - *" $libdir "*) ;; - *) compile_rpath="$compile_rpath $libdir" ;; - esac - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - # Create the binary in the object directory, then wrap it. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case "$dlsyms" in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" - $run $rm $export_symbols - $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run eval "sed -e 's/$[][.*^$]$/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | sed -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{\ -" - - sed -n -e 's/^: $[^ ]*$ $/ {\"\1\", (lt_ptr_t) 0},/p' \ - -e 's/^. $[^ ]*$ $[^ ]*$$/ {"\2", (lt_ptr_t) \&\2},/p' \ - < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr_t) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case "$host" in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - status=$? - - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi - - exit $status - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case "$dir" in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case "$0" in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`echo $output|sed 's,.exe$,,'` ;; - esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - link_against_libtool_libs='$link_against_libtool_libs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - echo >> $output "\ - program=lt-'$outputname' - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if (cd \"\$thisdir\" && eval \$relink_command); then : - else - $rm \"\$progdir/\$file\" - exit 1 - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - *-*-cygwin* | *-*-mingw | *-*-os2*) - # win32 systems need to use the prog path for dll - # lookup to work - $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} -" - ;; - *) - $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} -" - ;; - esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case "$xlib" in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" - else - # Ensure that we have .o objects in place in case we decided - # not to build a shared library, and have fallen back to building - # static libs even though --disable-static was passed! - for oldobj in $oldobjs; do - if test ! -f $oldobj; then - xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$oldobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` - obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - $show "(cd $xdir && ${LN_S} $obj $baseobj)" - $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? - fi - done - - eval cmds=\"$old_archive_cmds\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case "$output" in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - - if test -n "$xrpath"; then - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - done - dependency_libs="$temp_xrpath $dependency_libs" - fi - - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - fi - $rm $output - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$dlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Directory that this library needs to be installed in: -libdir='$install_libdir'\ -" - done - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? - ;; - esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case "$arg" in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test $# -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case "$file" in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case "$file" in - *.a | *.lib) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$realname $destdir/$realname" - $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? - - if test $# -gt 0; then - # Delete the old symlinks, and create new ones. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case "$destfile" in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.o | *.obj) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - link_against_libtool_libs= - relink_command= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Check the variables that should have been set. - if test -z "$link_against_libtool_libs"; then - $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $link_against_libtool_libs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case "$lib" in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : - else - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%$[^/]*$$%$objdir/\1%"` - fi - fi - - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec $SHELL $0 --finish$current_libdirs - exit 1 - fi - - exit 0 - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit 0 - - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case "$file" in - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case "$file" in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved enviroment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi - - # Now actually exec the command. - eval "exec \$cmd$args" - - $echo "$modename: cannot exec \$cmd$args" - exit 1 - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit 0 - fi - ;; - - # libtool uninstall mode - uninstall) - modename="$modename: uninstall" - rm="$nonopt" - files= - - for arg - do - case "$arg" in - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - rmfiles="$file" - - case "$name" in - *.la) - # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $dir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" - - $show "$rm $rmfiles" - $run $rm $rmfiles - - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - # FIXME: should reinstall the best remaining shared library. - fi - ;; - - *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` - rmfiles="$rmfiles $dir/$oldobj" - fi - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - - *) - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - esac - done - exit 0 - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac - - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 -fi # test -z "$show_help" - -# We need to display help for each of the modes. -case "$mode" in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --version print version information - -MODE must be one of the following: - - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/external/privoxy/pcre/maketables.c b/external/privoxy/pcre/maketables.c deleted file mode 100644 index c0f06c0..0000000 --- a/external/privoxy/pcre/maketables.c +++ /dev/null @@ -1,132 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -PCRE is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - - Copyright (c) 1997-2000 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ - -See the file Tech.Notes for some information on the internals. -*/ - - -/* This file is compiled on its own as part of the PCRE library. However, -it is also included in the compilation of dftables.c, in which case the macro -DFTABLES is defined. */ - -#ifndef DFTABLES -#include "internal.h" -#endif - - - -/************************************************* -* Create PCRE character tables * -*************************************************/ - -/* This function builds a set of character tables for use by PCRE and returns -a pointer to them. They are build using the ctype functions, and consequently -their contents will depend upon the current locale setting. When compiled as -part of the library, the store is obtained via pcre_malloc(), but when compiled -inside dftables, use malloc(). - -Arguments: none -Returns: pointer to the contiguous block of data -*/ - -unsigned const char * -pcre_maketables(void) -{ -unsigned char *yield, *p; -int i; - -#ifndef DFTABLES -yield = (unsigned char*)(pcre_malloc)(tables_length); -#else -yield = (unsigned char*)malloc(tables_length); -#endif - -if (yield == NULL) return NULL; -p = yield; - -/* First comes the lower casing table */ - -for (i = 0; i < 256; i++) *p++ = tolower(i); - -/* Next the case-flipping table */ - -for (i = 0; i < 256; i++) *p++ = islower(i)? toupper(i) : tolower(i); - -/* Then the character class tables. Don't try to be clever and save effort -on exclusive ones - in some locales things may be different. */ - -memset(p, 0, cbit_length); -for (i = 0; i < 256; i++) - { - if (isdigit(i)) - { - p[cbit_digit + i/8] |= 1 << (i&7); - p[cbit_word + i/8] |= 1 << (i&7); - } - if (isupper(i)) - { - p[cbit_upper + i/8] |= 1 << (i&7); - p[cbit_word + i/8] |= 1 << (i&7); - } - if (islower(i)) - { - p[cbit_lower + i/8] |= 1 << (i&7); - p[cbit_word + i/8] |= 1 << (i&7); - } - if (i == '_') p[cbit_word + i/8] |= 1 << (i&7); - if (isspace(i)) p[cbit_space + i/8] |= 1 << (i&7); - if (isxdigit(i))p[cbit_xdigit + i/8] |= 1 << (i&7); - if (isgraph(i)) p[cbit_graph + i/8] |= 1 << (i&7); - if (isprint(i)) p[cbit_print + i/8] |= 1 << (i&7); - if (ispunct(i)) p[cbit_punct + i/8] |= 1 << (i&7); - if (iscntrl(i)) p[cbit_cntrl + i/8] |= 1 << (i&7); - } -p += cbit_length; - -/* Finally, the character type table */ - -for (i = 0; i < 256; i++) - { - int x = 0; - if (isspace(i)) x += ctype_space; - if (isalpha(i)) x += ctype_letter; - if (isdigit(i)) x += ctype_digit; - if (isxdigit(i)) x += ctype_xdigit; - if (isalnum(i) || i == '_') x += ctype_word; - if (strchr("*+?{^.$|()[", i) != 0) x += ctype_meta; - *p++ = x; - } - -return yield; -} - -/* End of maketables.c */ diff --git a/external/privoxy/pcre/pcre-config b/external/privoxy/pcre/pcre-config deleted file mode 100755 index ac9ccfe..0000000 --- a/external/privoxy/pcre/pcre-config +++ /dev/null @@ -1,59 +0,0 @@ -#!/bin/sh - -prefix=/usr/local -exec_prefix=${prefix} -exec_prefix_set=no - -usage="\ -Usage: pcre-config [--prefix] [--exec-prefix] [--version] [--libs] [--libs-posix] [--cflags] [--cflags-posix]" - -if test $# -eq 0; then - echo "${usage}" 1>&2 - exit 1 -fi - -while test $# -gt 0; do - case "$1" in - -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - case $1 in - --prefix=*) - prefix=$optarg - if test $exec_prefix_set = no ; then - exec_prefix=$optarg - fi - ;; - --prefix) - echo $prefix - ;; - --exec-prefix=*) - exec_prefix=$optarg - exec_prefix_set=yes - ;; - --exec-prefix) - echo $exec_prefix - ;; - --version) - echo 3.4 - ;; - --cflags | --cflags-posix) - if test ${prefix}/include != /usr/include ; then - includes=-I${prefix}/include - fi - echo $includes - ;; - --libs-posix) - echo -L${exec_prefix}/lib -lpcreposix -lpcre - ;; - --libs) - echo -L${exec_prefix}/lib -lpcre - ;; - *) - echo "${usage}" 1>&2 - exit 1 - ;; - esac - shift -done diff --git a/external/privoxy/pcre/pcre-config.in b/external/privoxy/pcre/pcre-config.in deleted file mode 100644 index 8daded9..0000000 --- a/external/privoxy/pcre/pcre-config.in +++ /dev/null @@ -1,59 +0,0 @@ -#!/bin/sh - -prefix=@prefix@ -exec_prefix=@exec_prefix@ -exec_prefix_set=no - -usage="\ -Usage: pcre-config [--prefix] [--exec-prefix] [--version] [--libs] [--libs-posix] [--cflags] [--cflags-posix]" - -if test $# -eq 0; then - echo "${usage}" 1>&2 - exit 1 -fi - -while test $# -gt 0; do - case "$1" in - -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - case $1 in - --prefix=*) - prefix=$optarg - if test $exec_prefix_set = no ; then - exec_prefix=$optarg - fi - ;; - --prefix) - echo $prefix - ;; - --exec-prefix=*) - exec_prefix=$optarg - exec_prefix_set=yes - ;; - --exec-prefix) - echo $exec_prefix - ;; - --version) - echo @PCRE_VERSION@ - ;; - --cflags | --cflags-posix) - if test @includedir@ != /usr/include ; then - includes=-I@includedir@ - fi - echo $includes - ;; - --libs-posix) - echo -L@libdir@ -lpcreposix -lpcre - ;; - --libs) - echo -L@libdir@ -lpcre - ;; - *) - echo "${usage}" 1>&2 - exit 1 - ;; - esac - shift -done diff --git a/external/privoxy/pcre/pcre.c b/external/privoxy/pcre/pcre.c deleted file mode 100644 index 5149f8d..0000000 --- a/external/privoxy/pcre/pcre.c +++ /dev/null @@ -1,5151 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - - Copyright (c) 1997-2000 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - - -/* Define DEBUG to get debugging output on stdout. */ - -/* #define DEBUG */ - -/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef -inline, and there are *still* stupid compilers about that don't like indented -pre-processor statements. I suppose it's only been 10 years... */ - -#ifdef DEBUG -#define DPRINTF(p) printf p -#else -#define DPRINTF(p) /*nothing*/ -#endif - -/* Include the internals header, which itself includes Standard C headers plus -the external pcre header. */ - -#include "internal.h" - - -/* Allow compilation as C++ source code, should anybody want to do that. */ - -#ifdef __cplusplus -#define class pcre_class -#endif - - -/* Number of items on the nested bracket stacks at compile time. This should -not be set greater than 200. */ - -#define BRASTACK_SIZE 200 - - -/* The number of bytes in a literal character string above which we can't add -any more is different when UTF-8 characters may be encountered. */ - -#ifdef SUPPORT_UTF8 -#define MAXLIT 250 -#else -#define MAXLIT 255 -#endif - - -/* Min and max values for the common repeats; for the maxima, 0 => infinity */ - -static const char rep_min[] = { 0, 0, 1, 1, 0, 0 }; -static const char rep_max[] = { 0, 0, 0, 0, 1, 1 }; - -/* Text forms of OP_ values and things, for debugging (not all used) */ - -#ifdef DEBUG -static const char *OP_names[] = { - "End", "\\A", "\\B", "\\b", "\\D", "\\d", - "\\S", "\\s", "\\W", "\\w", "\\Z", "\\z", - "Opt", "^", "$", "Any", "chars", "not", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", - "class", "Ref", "Recurse", - "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not", - "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cref", - "Brazero", "Braminzero", "Bra" -}; -#endif - -/* Table for handling escaped characters in the range '0'-'z'. Positive returns -are simple data values; negative values are for special things like \d and so -on. Zero means further processing is needed (for things like \x), or the escape -is invalid. */ - -static const short int escapes[] = { - 0, 0, 0, 0, 0, 0, 0, 0, /* 0 - 7 */ - 0, 0, ':', ';', '<', '=', '>', '?', /* 8 - ? */ - '@', -ESC_A, -ESC_B, 0, -ESC_D, 0, 0, 0, /* @ - G */ - 0, 0, 0, 0, 0, 0, 0, 0, /* H - O */ - 0, 0, 0, -ESC_S, 0, 0, 0, -ESC_W, /* P - W */ - 0, 0, -ESC_Z, '[', '\\', ']', '^', '_', /* X - _ */ - '`', 7, -ESC_b, 0, -ESC_d, 27, '\f', 0, /* ` - g */ - 0, 0, 0, 0, 0, 0, '\n', 0, /* h - o */ - 0, 0, '\r', -ESC_s, '\t', 0, 0, -ESC_w, /* p - w */ - 0, 0, -ESC_z /* x - z */ -}; - -/* Tables of names of POSIX character classes and their lengths. The list is -terminated by a zero length entry. The first three must be alpha, upper, lower, -as this is assumed for handling case independence. */ - -static const char *posix_names[] = { - "alpha", "lower", "upper", - "alnum", "ascii", "cntrl", "digit", "graph", - "print", "punct", "space", "word", "xdigit" }; - -static const uschar posix_name_lengths[] = { - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 }; - -/* Table of class bit maps for each POSIX class; up to three may be combined -to form the class. */ - -static const int posix_class_maps[] = { - cbit_lower, cbit_upper, -1, /* alpha */ - cbit_lower, -1, -1, /* lower */ - cbit_upper, -1, -1, /* upper */ - cbit_digit, cbit_lower, cbit_upper, /* alnum */ - cbit_print, cbit_cntrl, -1, /* ascii */ - cbit_cntrl, -1, -1, /* cntrl */ - cbit_digit, -1, -1, /* digit */ - cbit_graph, -1, -1, /* graph */ - cbit_print, -1, -1, /* print */ - cbit_punct, -1, -1, /* punct */ - cbit_space, -1, -1, /* space */ - cbit_word, -1, -1, /* word */ - cbit_xdigit,-1, -1 /* xdigit */ -}; - - -/* Definition to allow mutual recursion */ - -static BOOL - compile_regex(int, int, int *, uschar **, const uschar **, const char **, - BOOL, int, int *, int *, compile_data *); - -/* Structure for building a chain of data that actually lives on the -stack, for holding the values of the subject pointer at the start of each -subpattern, so as to detect when an empty string has been matched by a -subpattern - to break infinite loops. */ - -typedef struct eptrblock { - struct eptrblock *prev; - const uschar *saved_eptr; -} eptrblock; - -/* Flag bits for the match() function */ - -#define match_condassert 0x01 /* Called to check a condition assertion */ -#define match_isgroup 0x02 /* Set if start of bracketed group */ - - - -/************************************************* -* Global variables * -*************************************************/ - -/* PCRE is thread-clean and doesn't use any global variables in the normal -sense. However, it calls memory allocation and free functions via the two -indirections below, which are can be changed by the caller, but are shared -between all threads. */ - -void *(*pcre_malloc)(size_t) = malloc; -void (*pcre_free)(void *) = free; - - - -/************************************************* -* Macros and tables for character handling * -*************************************************/ - -/* When UTF-8 encoding is being used, a character is no longer just a single -byte. The macros for character handling generate simple sequences when used in -byte-mode, and more complicated ones for UTF-8 characters. */ - -#ifndef SUPPORT_UTF8 -#define GETCHARINC(c, eptr) c = *eptr++; -#define GETCHARLEN(c, eptr, len) c = *eptr; -#define BACKCHAR(eptr) - -#else /* SUPPORT_UTF8 */ - -/* Get the next UTF-8 character, advancing the pointer */ - -#define GETCHARINC(c, eptr) \ - c = *eptr++; \ - if (md->utf8 && (c & 0xc0) == 0xc0) \ - { \ - int a = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int s = 6 - a; /* Amount to shift next byte */ \ - c &= utf8_table3[a]; /* Low order bits from first byte */ \ - while (a-- > 0) \ - { \ - c |= (*eptr++ & 0x3f) << s; \ - s += 6; \ - } \ - } - -/* Get the next UTF-8 character, not advancing the pointer, setting length */ - -#define GETCHARLEN(c, eptr, len) \ - c = *eptr; \ - len = 1; \ - if (md->utf8 && (c & 0xc0) == 0xc0) \ - { \ - int i; \ - int a = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int s = 6 - a; /* Amount to shift next byte */ \ - c &= utf8_table3[a]; /* Low order bits from first byte */ \ - for (i = 1; i <= a; i++) \ - { \ - c |= (eptr[i] & 0x3f) << s; \ - s += 6; \ - } \ - len += a; \ - } - -/* If the pointer is not at the start of a character, move it back until -it is. */ - -#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--; - -#endif - - - -/************************************************* -* Default character tables * -*************************************************/ - -/* A default set of character tables is included in the PCRE binary. Its source -is built by the maketables auxiliary program, which uses the default C ctypes -functions, and put in the file chartables.c. These tables are used by PCRE -whenever the caller of pcre_compile() does not provide an alternate set of -tables. */ - -#include "chartables.c" - - - -#ifdef SUPPORT_UTF8 -/************************************************* -* Tables for UTF-8 support * -*************************************************/ - -/* These are the breakpoints for different numbers of bytes in a UTF-8 -character. */ - -static int utf8_table1[] = { 0x7f, 0x7ff, 0xffff, 0x1fffff, 0x3ffffff, 0x7fffffff}; - -/* These are the indicator bits and the mask for the data bits to set in the -first byte of a character, indexed by the number of additional bytes. */ - -static int utf8_table2[] = { 0, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc}; -static int utf8_table3[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01}; - -/* Table of the number of extra characters, indexed by the first character -masked with 0x3f. The highest number for a valid UTF-8 character is in fact -0x3d. */ - -static uschar utf8_table4[] = { - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, - 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 }; - - -/************************************************* -* Convert character value to UTF-8 * -*************************************************/ - -/* This function takes an integer value in the range 0 - 0x7fffffff -and encodes it as a UTF-8 character in 0 to 6 bytes. - -Arguments: - cvalue the character value - buffer pointer to buffer for result - at least 6 bytes long - -Returns: number of characters placed in the buffer -*/ - -static int -ord2utf8(int cvalue, uschar *buffer) -{ -register int i, j; -for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++) - if (cvalue <= utf8_table1[i]) break; -*buffer++ = utf8_table2[i] | (cvalue & utf8_table3[i]); -cvalue >>= 6 - i; -for (j = 0; j < i; j++) - { - *buffer++ = 0x80 | (cvalue & 0x3f); - cvalue >>= 6; - } -return i + 1; -} -#endif - - - -/************************************************* -* Return version string * -*************************************************/ - -#define STRING(a) # a -#define XSTRING(s) STRING(s) - -const char * -pcre_version(void) -{ -return XSTRING(PCRE_MAJOR) "." XSTRING(PCRE_MINOR) " " XSTRING(PCRE_DATE); -} - - - - -/************************************************* -* (Obsolete) Return info about compiled pattern * -*************************************************/ - -/* This is the original "info" function. It picks potentially useful data out -of the private structure, but its interface was too rigid. It remains for -backwards compatibility. The public options are passed back in an int - though -the re->options field has been expanded to a long int, all the public options -at the low end of it, and so even on 16-bit systems this will still be OK. -Therefore, I haven't changed the API for pcre_info(). - -Arguments: - external_re points to compiled code - optptr where to pass back the options - first_char where to pass back the first character, - or -1 if multiline and all branches start ^, - or -2 otherwise - -Returns: number of capturing subpatterns - or negative values on error -*/ - -int -pcre_info(const pcre *external_re, int *optptr, int *first_char) -{ -const real_pcre *re = (const real_pcre *)external_re; -if (re == NULL) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; -if (optptr != NULL) *optptr = (int)(re->options & PUBLIC_OPTIONS); -if (first_char != NULL) - *first_char = ((re->options & PCRE_FIRSTSET) != 0)? re->first_char : - ((re->options & PCRE_STARTLINE) != 0)? -1 : -2; -return re->top_bracket; -} - - - -/************************************************* -* Return info about compiled pattern * -*************************************************/ - -/* This is a newer "info" function which has an extensible interface so -that additional items can be added compatibly. - -Arguments: - external_re points to compiled code - external_study points to study data, or NULL - what what information is required - where where to put the information - -Returns: 0 if data returned, negative on error -*/ - -int -pcre_fullinfo(const pcre *external_re, const pcre_extra *study_data, int what, - void *where) -{ -const real_pcre *re = (const real_pcre *)external_re; -const real_pcre_extra *study = (const real_pcre_extra *)study_data; - -if (re == NULL || where == NULL) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; - -switch (what) - { - case PCRE_INFO_OPTIONS: - *((unsigned long int *)where) = re->options & PUBLIC_OPTIONS; - break; - - case PCRE_INFO_SIZE: - *((size_t *)where) = re->size; - break; - - case PCRE_INFO_CAPTURECOUNT: - *((int *)where) = re->top_bracket; - break; - - case PCRE_INFO_BACKREFMAX: - *((int *)where) = re->top_backref; - break; - - case PCRE_INFO_FIRSTCHAR: - *((int *)where) = - ((re->options & PCRE_FIRSTSET) != 0)? re->first_char : - ((re->options & PCRE_STARTLINE) != 0)? -1 : -2; - break; - - case PCRE_INFO_FIRSTTABLE: - *((const uschar **)where) = - (study != NULL && (study->options & PCRE_STUDY_MAPPED) != 0)? - study->start_bits : NULL; - break; - - case PCRE_INFO_LASTLITERAL: - *((int *)where) = - ((re->options & PCRE_REQCHSET) != 0)? re->req_char : -1; - break; - - default: return PCRE_ERROR_BADOPTION; - } - -return 0; -} - - - -#ifdef DEBUG -/************************************************* -* Debugging function to print chars * -*************************************************/ - -/* Print a sequence of chars in printable format, stopping at the end of the -subject if the requested. - -Arguments: - p points to characters - length number to print - is_subject TRUE if printing from within md->start_subject - md pointer to matching data block, if is_subject is TRUE - -Returns: nothing -*/ - -static void -pchars(const uschar *p, int length, BOOL is_subject, match_data *md) -{ -int c; -if (is_subject && length > md->end_subject - p) length = md->end_subject - p; -while (length-- > 0) - if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c); -} -#endif - - - - -/************************************************* -* Handle escapes * -*************************************************/ - -/* This function is called when a \ has been encountered. It either returns a -positive value for a simple escape such as \n, or a negative value which -encodes one of the more complicated things such as \d. When UTF-8 is enabled, -a positive value greater than 255 may be returned. On entry, ptr is pointing at -the \. On exit, it is on the final character of the escape sequence. - -Arguments: - ptrptr points to the pattern position pointer - errorptr points to the pointer to the error message - bracount number of previous extracting brackets - options the options bits - isclass TRUE if inside a character class - cd pointer to char tables block - -Returns: zero or positive => a data character - negative => a special escape sequence - on error, errorptr is set -*/ - -static int -check_escape(const uschar **ptrptr, const char **errorptr, int bracount, - int options, BOOL isclass, compile_data *cd) -{ -const uschar *ptr = *ptrptr; -int c, i; - -/* If backslash is at the end of the pattern, it's an error. */ - -c = *(++ptr); -if (c == 0) *errorptr = ERR1; - -/* Digits or letters may have special meaning; all others are literals. */ - -else if (c < '0' || c > 'z') {} - -/* Do an initial lookup in a table. A non-zero result is something that can be -returned immediately. Otherwise further processing may be required. */ - -else if ((i = escapes[c - '0']) != 0) c = i; - -/* Escapes that need further processing, or are illegal. */ - -else - { - const uschar *oldptr; - switch (c) - { - /* The handling of escape sequences consisting of a string of digits - starting with one that is not zero is not straightforward. By experiment, - the way Perl works seems to be as follows: - - Outside a character class, the digits are read as a decimal number. If the - number is less than 10, or if there are that many previous extracting - left brackets, then it is a back reference. Otherwise, up to three octal - digits are read to form an escaped byte. Thus \123 is likely to be octal - 123 (cf \0123, which is octal 012 followed by the literal 3). If the octal - value is greater than 377, the least significant 8 bits are taken. Inside a - character class, \ followed by a digit is always an octal number. */ - - case '1': case '2': case '3': case '4': case '5': - case '6': case '7': case '8': case '9': - - if (!isclass) - { - oldptr = ptr; - c -= '0'; - while ((cd->ctypes[ptr[1]] & ctype_digit) != 0) - c = c * 10 + *(++ptr) - '0'; - if (c < 10 || c <= bracount) - { - c = -(ESC_REF + c); - break; - } - ptr = oldptr; /* Put the pointer back and fall through */ - } - - /* Handle an octal number following \. If the first digit is 8 or 9, Perl - generates a binary zero byte and treats the digit as a following literal. - Thus we have to pull back the pointer by one. */ - - if ((c = *ptr) >= '8') - { - ptr--; - c = 0; - break; - } - - /* \0 always starts an octal number, but we may drop through to here with a - larger first octal digit. */ - - case '0': - c -= '0'; - while(i++ < 2 && (cd->ctypes[ptr[1]] & ctype_digit) != 0 && - ptr[1] != '8' && ptr[1] != '9') - c = c * 8 + *(++ptr) - '0'; - c &= 255; /* Take least significant 8 bits */ - break; - - /* \x is complicated when UTF-8 is enabled. \x{ddd} is a character number - which can be greater than 0xff, but only if the ddd are hex digits. */ - - case 'x': -#ifdef SUPPORT_UTF8 - if (ptr[1] == '{' && (options & PCRE_UTF8) != 0) - { - const uschar *pt = ptr + 2; - register int count = 0; - c = 0; - while ((cd->ctypes[*pt] & ctype_xdigit) != 0) - { - count++; - c = c * 16 + cd->lcc[*pt] - - (((cd->ctypes[*pt] & ctype_digit) != 0)? '0' : 'W'); - pt++; - } - if (*pt == '}') - { - if (c < 0 || count > 8) *errorptr = ERR34; - ptr = pt; - break; - } - /* If the sequence of hex digits does not end with '}', then we don't - recognize this construct; fall through to the normal \x handling. */ - } -#endif - - /* Read just a single hex char */ - - c = 0; - while (i++ < 2 && (cd->ctypes[ptr[1]] & ctype_xdigit) != 0) - { - ptr++; - c = c * 16 + cd->lcc[*ptr] - - (((cd->ctypes[*ptr] & ctype_digit) != 0)? '0' : 'W'); - } - break; - - /* Other special escapes not starting with a digit are straightforward */ - - case 'c': - c = *(++ptr); - if (c == 0) - { - *errorptr = ERR2; - return 0; - } - - /* A letter is upper-cased; then the 0x40 bit is flipped */ - - if (c >= 'a' && c <= 'z') c = cd->fcc[c]; - c ^= 0x40; - break; - - /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any - other alphameric following \ is an error if PCRE_EXTRA was set; otherwise, - for Perl compatibility, it is a literal. This code looks a bit odd, but - there used to be some cases other than the default, and there may be again - in future, so I haven't "optimized" it. */ - - default: - if ((options & PCRE_EXTRA) != 0) switch(c) - { - default: - *errorptr = ERR3; - break; - } - break; - } - } - -*ptrptr = ptr; -return c; -} - - - -/************************************************* -* Check for counted repeat * -*************************************************/ - -/* This function is called when a '{' is encountered in a place where it might -start a quantifier. It looks ahead to see if it really is a quantifier or not. -It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd} -where the ddds are digits. - -Arguments: - p pointer to the first char after '{' - cd pointer to char tables block - -Returns: TRUE or FALSE -*/ - -static BOOL -is_counted_repeat(const uschar *p, compile_data *cd) -{ -if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE; -while ((cd->ctypes[*p] & ctype_digit) != 0) p++; -if (*p == '}') return TRUE; - -if (*p++ != ',') return FALSE; -if (*p == '}') return TRUE; - -if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE; -while ((cd->ctypes[*p] & ctype_digit) != 0) p++; -return (*p == '}'); -} - - - -/************************************************* -* Read repeat counts * -*************************************************/ - -/* Read an item of the form {n,m} and return the values. This is called only -after is_counted_repeat() has confirmed that a repeat-count quantifier exists, -so the syntax is guaranteed to be correct, but we need to check the values. - -Arguments: - p pointer to first char after '{' - minp pointer to int for min - maxp pointer to int for max - returned as -1 if no max - errorptr points to pointer to error message - cd pointer to character tables clock - -Returns: pointer to '}' on success; - current ptr on error, with errorptr set -*/ - -static const uschar * -read_repeat_counts(const uschar *p, int *minp, int *maxp, - const char **errorptr, compile_data *cd) -{ -int min = 0; -int max = -1; - -while ((cd->ctypes[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0'; - -if (*p == '}') max = min; else - { - if (*(++p) != '}') - { - max = 0; - while((cd->ctypes[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0'; - if (max < min) - { - *errorptr = ERR4; - return p; - } - } - } - -/* Do paranoid checks, then fill in the required variables, and pass back the -pointer to the terminating '}'. */ - -if (min > 65535 || max > 65535) - *errorptr = ERR5; -else - { - *minp = min; - *maxp = max; - } -return p; -} - - - -/************************************************* -* Find the fixed length of a pattern * -*************************************************/ - -/* Scan a pattern and compute the fixed length of subject that will match it, -if the length is fixed. This is needed for dealing with backward assertions. - -Arguments: - code points to the start of the pattern (the bracket) - options the compiling options - -Returns: the fixed length, or -1 if there is no fixed length -*/ - -static int -find_fixedlength(uschar *code, int options) -{ -int length = -1; - -register int branchlength = 0; -register uschar *cc = code + 3; - -/* Scan along the opcodes for this branch. If we get to the end of the -branch, check the length against that of the other branches. */ - -for (;;) - { - int d; - register int op = *cc; - if (op >= OP_BRA) op = OP_BRA; - - switch (op) - { - case OP_BRA: - case OP_ONCE: - case OP_COND: - d = find_fixedlength(cc, options); - if (d < 0) return -1; - branchlength += d; - do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT); - cc += 3; - break; - - /* Reached end of a branch; if it's a ket it is the end of a nested - call. If it's ALT it is an alternation in a nested call. If it is - END it's the end of the outer call. All can be handled by the same code. */ - - case OP_ALT: - case OP_KET: - case OP_KETRMAX: - case OP_KETRMIN: - case OP_END: - if (length < 0) length = branchlength; - else if (length != branchlength) return -1; - if (*cc != OP_ALT) return length; - cc += 3; - branchlength = 0; - break; - - /* Skip over assertive subpatterns */ - - case OP_ASSERT: - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT); - cc += 3; - break; - - /* Skip over things that don't match chars */ - - case OP_REVERSE: - cc++; - /* Fall through */ - - case OP_CREF: - case OP_OPT: - cc++; - /* Fall through */ - - case OP_SOD: - case OP_EOD: - case OP_EODN: - case OP_CIRC: - case OP_DOLL: - case OP_NOT_WORD_BOUNDARY: - case OP_WORD_BOUNDARY: - cc++; - break; - - /* Handle char strings. In UTF-8 mode we must count characters, not bytes. - This requires a scan of the string, unfortunately. We assume valid UTF-8 - strings, so all we do is reduce the length by one for byte whose bits are - 10xxxxxx. */ - - case OP_CHARS: - branchlength += *(++cc); -#ifdef SUPPORT_UTF8 - for (d = 1; d <= *cc; d++) - if ((cc[d] & 0xc0) == 0x80) branchlength--; -#endif - cc += *cc + 1; - break; - - /* Handle exact repetitions */ - - case OP_EXACT: - case OP_TYPEEXACT: - branchlength += (cc[1] << 8) + cc[2]; - cc += 4; - break; - - /* Handle single-char matchers */ - - case OP_NOT_DIGIT: - case OP_DIGIT: - case OP_NOT_WHITESPACE: - case OP_WHITESPACE: - case OP_NOT_WORDCHAR: - case OP_WORDCHAR: - case OP_ANY: - branchlength++; - cc++; - break; - - - /* Check a class for variable quantification */ - - case OP_CLASS: - cc += (*cc == OP_REF)? 2 : 33; - - switch (*cc) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRQUERY: - case OP_CRMINQUERY: - return -1; - - case OP_CRRANGE: - case OP_CRMINRANGE: - if ((cc[1] << 8) + cc[2] != (cc[3] << 8) + cc[4]) return -1; - branchlength += (cc[1] << 8) + cc[2]; - cc += 5; - break; - - default: - branchlength++; - } - break; - - /* Anything else is variable length */ - - default: - return -1; - } - } -/* Control never gets here */ -} - - - - -/************************************************* -* Check for POSIX class syntax * -*************************************************/ - -/* This function is called when the sequence "[:" or "[." or "[=" is -encountered in a character class. It checks whether this is followed by an -optional ^ and then a sequence of letters, terminated by a matching ":]" or -".]" or "=]". - -Argument: - ptr pointer to the initial [ - endptr where to return the end pointer - cd pointer to compile data - -Returns: TRUE or FALSE -*/ - -static BOOL -check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd) -{ -int terminator; /* Don't combine these lines; the Solaris cc */ -terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */ -if (*(++ptr) == '^') ptr++; -while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++; -if (*ptr == terminator && ptr[1] == ']') - { - *endptr = ptr; - return TRUE; - } -return FALSE; -} - - - - -/************************************************* -* Check POSIX class name * -*************************************************/ - -/* This function is called to check the name given in a POSIX-style class entry -such as [:alnum:]. - -Arguments: - ptr points to the first letter - len the length of the name - -Returns: a value representing the name, or -1 if unknown -*/ - -static int -check_posix_name(const uschar *ptr, int len) -{ -register int yield = 0; -while (posix_name_lengths[yield] != 0) - { - if (len == posix_name_lengths[yield] && - strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield; - yield++; - } -return -1; -} - - - - -/************************************************* -* Compile one branch * -*************************************************/ - -/* Scan the pattern, compiling it into the code vector. - -Arguments: - options the option bits - brackets points to number of brackets used - code points to the pointer to the current code point - ptrptr points to the current pattern pointer - errorptr points to pointer to error message - optchanged set to the value of the last OP_OPT item compiled - reqchar set to the last literal character required, else -1 - countlits set to count of mandatory literal characters - cd contains pointers to tables - -Returns: TRUE on success - FALSE, with *errorptr set on error -*/ - -static BOOL -compile_branch(int options, int *brackets, uschar **codeptr, - const uschar **ptrptr, const char **errorptr, int *optchanged, - int *reqchar, int *countlits, compile_data *cd) -{ -int repeat_type, op_type; -int repeat_min, repeat_max; -int bravalue, length; -int greedy_default, greedy_non_default; -int prevreqchar; -int condcount = 0; -int subcountlits = 0; -register int c; -register uschar *code = *codeptr; -uschar *tempcode; -const uschar *ptr = *ptrptr; -const uschar *tempptr; -uschar *previous = NULL; -uschar class[32]; - -/* Set up the default and non-default settings for greediness */ - -greedy_default = ((options & PCRE_UNGREEDY) != 0); -greedy_non_default = greedy_default ^ 1; - -/* Initialize no required char, and count of literals */ - -*reqchar = prevreqchar = -1; -*countlits = 0; - -/* Switch on next character until the end of the branch */ - -for (;; ptr++) - { - BOOL negate_class; - int class_charcount; - int class_lastchar; - int newoptions; - int condref; - int subreqchar; - - c = *ptr; - if ((options & PCRE_EXTENDED) != 0) - { - if ((cd->ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != '\n') ; - continue; - } - } - - switch(c) - { - /* The branch terminates at end of string, |, or ). */ - - case 0: - case '|': - case ')': - *codeptr = code; - *ptrptr = ptr; - return TRUE; - - /* Handle single-character metacharacters */ - - case '^': - previous = NULL; - *code++ = OP_CIRC; - break; - - case '$': - previous = NULL; - *code++ = OP_DOLL; - break; - - case '.': - previous = code; - *code++ = OP_ANY; - break; - - /* Character classes. These always build a 32-byte bitmap of the permitted - characters, except in the special case where there is only one character. - For negated classes, we build the map as usual, then invert it at the end. - */ - - case '[': - previous = code; - *code++ = OP_CLASS; - - /* If the first character is '^', set the negation flag and skip it. */ - - if ((c = *(++ptr)) == '^') - { - negate_class = TRUE; - c = *(++ptr); - } - else negate_class = FALSE; - - /* Keep a count of chars so that we can optimize the case of just a single - character. */ - - class_charcount = 0; - class_lastchar = -1; - - /* Initialize the 32-char bit map to all zeros. We have to build the - map in a temporary bit of store, in case the class contains only 1 - character, because in that case the compiled code doesn't use the - bit map. */ - - memset(class, 0, 32 * sizeof(uschar)); - - /* Process characters until ] is reached. By writing this as a "do" it - means that an initial ] is taken as a data character. */ - - do - { - if (c == 0) - { - *errorptr = ERR6; - goto FAILED; - } - - /* Handle POSIX class names. Perl allows a negation extension of the - form [:^name]. A square bracket that doesn't match the syntax is - treated as a literal. We also recognize the POSIX constructions - [.ch.] and [=ch=] ("collating elements") and fault them, as Perl - 5.6 does. */ - - if (c == '[' && - (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') && - check_posix_syntax(ptr, &tempptr, cd)) - { - BOOL local_negate = FALSE; - int posix_class, i; - register const uschar *cbits = cd->cbits; - - if (ptr[1] != ':') - { - *errorptr = ERR31; - goto FAILED; - } - - ptr += 2; - if (*ptr == '^') - { - local_negate = TRUE; - ptr++; - } - - posix_class = check_posix_name(ptr, tempptr - ptr); - if (posix_class < 0) - { - *errorptr = ERR30; - goto FAILED; - } - - /* If matching is caseless, upper and lower are converted to - alpha. This relies on the fact that the class table starts with - alpha, lower, upper as the first 3 entries. */ - - if ((options & PCRE_CASELESS) != 0 && posix_class <= 2) - posix_class = 0; - - /* Or into the map we are building up to 3 of the static class - tables, or their negations. */ - - posix_class *= 3; - for (i = 0; i < 3; i++) - { - int taboffset = posix_class_maps[posix_class + i]; - if (taboffset < 0) break; - if (local_negate) - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+taboffset]; - else - for (c = 0; c < 32; c++) class[c] |= cbits[c+taboffset]; - } - - ptr = tempptr + 1; - class_charcount = 10; /* Set > 1; assumes more than 1 per class */ - continue; - } - - /* Backslash may introduce a single character, or it may introduce one - of the specials, which just set a flag. Escaped items are checked for - validity in the pre-compiling pass. The sequence \b is a special case. - Inside a class (and only there) it is treated as backspace. Elsewhere - it marks a word boundary. Other escapes have preset maps ready to - or into the one we are building. We assume they have more than one - character in them, so set class_count bigger than one. */ - - if (c == '\\') - { - c = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd); - if (-c == ESC_b) c = '\b'; - else if (c < 0) - { - register const uschar *cbits = cd->cbits; - class_charcount = 10; - switch (-c) - { - case ESC_d: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_digit]; - continue; - - case ESC_D: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_digit]; - continue; - - case ESC_w: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_word]; - continue; - - case ESC_W: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_word]; - continue; - - case ESC_s: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_space]; - continue; - - case ESC_S: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_space]; - continue; - - default: - *errorptr = ERR7; - goto FAILED; - } - } - - /* Fall through if single character, but don't at present allow - chars > 255 in UTF-8 mode. */ - -#ifdef SUPPORT_UTF8 - if (c > 255) - { - *errorptr = ERR33; - goto FAILED; - } -#endif - } - - /* A single character may be followed by '-' to form a range. However, - Perl does not permit ']' to be the end of the range. A '-' character - here is treated as a literal. */ - - if (ptr[1] == '-' && ptr[2] != ']') - { - int d; - ptr += 2; - d = *ptr; - - if (d == 0) - { - *errorptr = ERR6; - goto FAILED; - } - - /* The second part of a range can be a single-character escape, but - not any of the other escapes. Perl 5.6 treats a hyphen as a literal - in such circumstances. */ - - if (d == '\\') - { - const uschar *oldptr = ptr; - d = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd); - -#ifdef SUPPORT_UTF8 - if (d > 255) - { - *errorptr = ERR33; - goto FAILED; - } -#endif - /* \b is backslash; any other special means the '-' was literal */ - - if (d < 0) - { - if (d == -ESC_b) d = '\b'; else - { - ptr = oldptr - 2; - goto SINGLE_CHARACTER; /* A few lines below */ - } - } - } - - if (d < c) - { - *errorptr = ERR8; - goto FAILED; - } - - for (; c <= d; c++) - { - class[c/8] |= (1 << (c&7)); - if ((options & PCRE_CASELESS) != 0) - { - int uc = cd->fcc[c]; /* flip case */ - class[uc/8] |= (1 << (uc&7)); - } - class_charcount++; /* in case a one-char range */ - class_lastchar = c; - } - continue; /* Go get the next char in the class */ - } - - /* Handle a lone single character - we can get here for a normal - non-escape char, or after \ that introduces a single character. */ - - SINGLE_CHARACTER: - - class [c/8] |= (1 << (c&7)); - if ((options & PCRE_CASELESS) != 0) - { - c = cd->fcc[c]; /* flip case */ - class[c/8] |= (1 << (c&7)); - } - class_charcount++; - class_lastchar = c; - } - - /* Loop until ']' reached; the check for end of string happens inside the - loop. This "while" is the end of the "do" above. */ - - while ((c = *(++ptr)) != ']'); - - /* If class_charcount is 1 and class_lastchar is not negative, we saw - precisely one character. This doesn't need the whole 32-byte bit map. - We turn it into a 1-character OP_CHAR if it's positive, or OP_NOT if - it's negative. */ - - if (class_charcount == 1 && class_lastchar >= 0) - { - if (negate_class) - { - code[-1] = OP_NOT; - } - else - { - code[-1] = OP_CHARS; - *code++ = 1; - } - *code++ = class_lastchar; - } - - /* Otherwise, negate the 32-byte map if necessary, and copy it into - the code vector. */ - - else - { - if (negate_class) - for (c = 0; c < 32; c++) code[c] = ~class[c]; - else - memcpy(code, class, 32); - code += 32; - } - break; - - /* Various kinds of repeat */ - - case '{': - if (!is_counted_repeat(ptr+1, cd)) goto NORMAL_CHAR; - ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorptr, cd); - if (*errorptr != NULL) goto FAILED; - goto REPEAT; - - case '*': - repeat_min = 0; - repeat_max = -1; - goto REPEAT; - - case '+': - repeat_min = 1; - repeat_max = -1; - goto REPEAT; - - case '?': - repeat_min = 0; - repeat_max = 1; - - REPEAT: - if (previous == NULL) - { - *errorptr = ERR9; - goto FAILED; - } - - /* If the next character is '?' this is a minimizing repeat, by default, - but if PCRE_UNGREEDY is set, it works the other way round. Advance to the - next character. */ - - if (ptr[1] == '?') - { repeat_type = greedy_non_default; ptr++; } - else repeat_type = greedy_default; - - /* If previous was a string of characters, chop off the last one and use it - as the subject of the repeat. If there was only one character, we can - abolish the previous item altogether. A repeat with a zero minimum wipes - out any reqchar setting, backing up to the previous value. We must also - adjust the countlits value. */ - - if (*previous == OP_CHARS) - { - int len = previous[1]; - - if (repeat_min == 0) *reqchar = prevreqchar; - *countlits += repeat_min - 1; - - if (len == 1) - { - c = previous[2]; - code = previous; - } - else - { - c = previous[len+1]; - previous[1]--; - code--; - } - op_type = 0; /* Use single-char op codes */ - goto OUTPUT_SINGLE_REPEAT; /* Code shared with single character types */ - } - - /* If previous was a single negated character ([^a] or similar), we use - one of the special opcodes, replacing it. The code is shared with single- - character repeats by adding a suitable offset into repeat_type. */ - - else if ((int)*previous == OP_NOT) - { - op_type = OP_NOTSTAR - OP_STAR; /* Use "not" opcodes */ - c = previous[1]; - code = previous; - goto OUTPUT_SINGLE_REPEAT; - } - - /* If previous was a character type match (\d or similar), abolish it and - create a suitable repeat item. The code is shared with single-character - repeats by adding a suitable offset into repeat_type. */ - - else if ((int)*previous < OP_EODN || *previous == OP_ANY) - { - op_type = OP_TYPESTAR - OP_STAR; /* Use type opcodes */ - c = *previous; - code = previous; - - OUTPUT_SINGLE_REPEAT: - - /* If the maximum is zero then the minimum must also be zero; Perl allows - this case, so we do too - by simply omitting the item altogether. */ - - if (repeat_max == 0) goto END_REPEAT; - - /* Combine the op_type with the repeat_type */ - - repeat_type += op_type; - - /* A minimum of zero is handled either as the special case * or ?, or as - an UPTO, with the maximum given. */ - - if (repeat_min == 0) - { - if (repeat_max == -1) *code++ = OP_STAR + repeat_type; - else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type; - else - { - *code++ = OP_UPTO + repeat_type; - *code++ = repeat_max >> 8; - *code++ = (repeat_max & 255); - } - } - - /* The case {1,} is handled as the special case + */ - - else if (repeat_min == 1 && repeat_max == -1) - *code++ = OP_PLUS + repeat_type; - - /* The case {n,n} is just an EXACT, while the general case {n,m} is - handled as an EXACT followed by an UPTO. An EXACT of 1 is optimized. */ - - else - { - if (repeat_min != 1) - { - *code++ = OP_EXACT + op_type; /* NB EXACT doesn't have repeat_type */ - *code++ = repeat_min >> 8; - *code++ = (repeat_min & 255); - } - - /* If the mininum is 1 and the previous item was a character string, - we either have to put back the item that got cancelled if the string - length was 1, or add the character back onto the end of a longer - string. For a character type nothing need be done; it will just get - put back naturally. Note that the final character is always going to - get added below. */ - - else if (*previous == OP_CHARS) - { - if (code == previous) code += 2; else previous[1]++; - } - - /* For a single negated character we also have to put back the - item that got cancelled. */ - - else if (*previous == OP_NOT) code++; - - /* If the maximum is unlimited, insert an OP_STAR. */ - - if (repeat_max < 0) - { - *code++ = c; - *code++ = OP_STAR + repeat_type; - } - - /* Else insert an UPTO if the max is greater than the min. */ - - else if (repeat_max != repeat_min) - { - *code++ = c; - repeat_max -= repeat_min; - *code++ = OP_UPTO + repeat_type; - *code++ = repeat_max >> 8; - *code++ = (repeat_max & 255); - } - } - - /* The character or character type itself comes last in all cases. */ - - *code++ = c; - } - - /* If previous was a character class or a back reference, we put the repeat - stuff after it, but just skip the item if the repeat was {0,0}. */ - - else if (*previous == OP_CLASS || *previous == OP_REF) - { - if (repeat_max == 0) - { - code = previous; - goto END_REPEAT; - } - if (repeat_min == 0 && repeat_max == -1) - *code++ = OP_CRSTAR + repeat_type; - else if (repeat_min == 1 && repeat_max == -1) - *code++ = OP_CRPLUS + repeat_type; - else if (repeat_min == 0 && repeat_max == 1) - *code++ = OP_CRQUERY + repeat_type; - else - { - *code++ = OP_CRRANGE + repeat_type; - *code++ = repeat_min >> 8; - *code++ = repeat_min & 255; - if (repeat_max == -1) repeat_max = 0; /* 2-byte encoding for max */ - *code++ = repeat_max >> 8; - *code++ = repeat_max & 255; - } - } - - /* If previous was a bracket group, we may have to replicate it in certain - cases. */ - - else if ((int)*previous >= OP_BRA || (int)*previous == OP_ONCE || - (int)*previous == OP_COND) - { - register int i; - int ketoffset = 0; - int len = code - previous; - uschar *bralink = NULL; - - /* If the maximum repeat count is unlimited, find the end of the bracket - by scanning through from the start, and compute the offset back to it - from the current code pointer. There may be an OP_OPT setting following - the final KET, so we can't find the end just by going back from the code - pointer. */ - - if (repeat_max == -1) - { - register uschar *ket = previous; - do ket += (ket[1] << 8) + ket[2]; while (*ket != OP_KET); - ketoffset = code - ket; - } - - /* The case of a zero minimum is special because of the need to stick - OP_BRAZERO in front of it, and because the group appears once in the - data, whereas in other cases it appears the minimum number of times. For - this reason, it is simplest to treat this case separately, as otherwise - the code gets far too mess. There are several special subcases when the - minimum is zero. */ - - if (repeat_min == 0) - { - /* If we set up a required char from the bracket, we must back off - to the previous value and reset the countlits value too. */ - - if (subcountlits > 0) - { - *reqchar = prevreqchar; - *countlits -= subcountlits; - } - - /* If the maximum is also zero, we just omit the group from the output - altogether. */ - - if (repeat_max == 0) - { - code = previous; - goto END_REPEAT; - } - - /* If the maximum is 1 or unlimited, we just have to stick in the - BRAZERO and do no more at this point. */ - - if (repeat_max <= 1) - { - memmove(previous+1, previous, len); - code++; - *previous++ = OP_BRAZERO + repeat_type; - } - - /* If the maximum is greater than 1 and limited, we have to replicate - in a nested fashion, sticking OP_BRAZERO before each set of brackets. - The first one has to be handled carefully because it's the original - copy, which has to be moved up. The remainder can be handled by code - that is common with the non-zero minimum case below. We just have to - adjust the value or repeat_max, since one less copy is required. */ - - else - { - int offset; - memmove(previous+4, previous, len); - code += 4; - *previous++ = OP_BRAZERO + repeat_type; - *previous++ = OP_BRA; - - /* We chain together the bracket offset fields that have to be - filled in later when the ends of the brackets are reached. */ - - offset = (bralink == NULL)? 0 : previous - bralink; - bralink = previous; - *previous++ = offset >> 8; - *previous++ = offset & 255; - } - - repeat_max--; - } - - /* If the minimum is greater than zero, replicate the group as many - times as necessary, and adjust the maximum to the number of subsequent - copies that we need. */ - - else - { - for (i = 1; i < repeat_min; i++) - { - memcpy(code, previous, len); - code += len; - } - if (repeat_max > 0) repeat_max -= repeat_min; - } - - /* This code is common to both the zero and non-zero minimum cases. If - the maximum is limited, it replicates the group in a nested fashion, - remembering the bracket starts on a stack. In the case of a zero minimum, - the first one was set up above. In all cases the repeat_max now specifies - the number of additional copies needed. */ - - if (repeat_max >= 0) - { - for (i = repeat_max - 1; i >= 0; i--) - { - *code++ = OP_BRAZERO + repeat_type; - - /* All but the final copy start a new nesting, maintaining the - chain of brackets outstanding. */ - - if (i != 0) - { - int offset; - *code++ = OP_BRA; - offset = (bralink == NULL)? 0 : code - bralink; - bralink = code; - *code++ = offset >> 8; - *code++ = offset & 255; - } - - memcpy(code, previous, len); - code += len; - } - - /* Now chain through the pending brackets, and fill in their length - fields (which are holding the chain links pro tem). */ - - while (bralink != NULL) - { - int oldlinkoffset; - int offset = code - bralink + 1; - uschar *bra = code - offset; - oldlinkoffset = (bra[1] << 8) + bra[2]; - bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset; - *code++ = OP_KET; - *code++ = bra[1] = offset >> 8; - *code++ = bra[2] = (offset & 255); - } - } - - /* If the maximum is unlimited, set a repeater in the final copy. We - can't just offset backwards from the current code point, because we - don't know if there's been an options resetting after the ket. The - correct offset was computed above. */ - - else code[-ketoffset] = OP_KETRMAX + repeat_type; - } - - /* Else there's some kind of shambles */ - - else - { - *errorptr = ERR11; - goto FAILED; - } - - /* In all case we no longer have a previous item. */ - - END_REPEAT: - previous = NULL; - break; - - - /* Start of nested bracket sub-expression, or comment or lookahead or - lookbehind or option setting or condition. First deal with special things - that can come after a bracket; all are introduced by ?, and the appearance - of any of them means that this is not a referencing group. They were - checked for validity in the first pass over the string, so we don't have to - check for syntax errors here. */ - - case '(': - newoptions = options; - condref = -1; - - if (*(++ptr) == '?') - { - int set, unset; - int *optset; - - switch (*(++ptr)) - { - case '#': /* Comment; skip to ket */ - ptr++; - while (*ptr != ')') ptr++; - continue; - - case ':': /* Non-extracting bracket */ - bravalue = OP_BRA; - ptr++; - break; - - case '(': - bravalue = OP_COND; /* Conditional group */ - if ((cd->ctypes[*(++ptr)] & ctype_digit) != 0) - { - condref = *ptr - '0'; - while (*(++ptr) != ')') condref = condref*10 + *ptr - '0'; - if (condref == 0) - { - *errorptr = ERR35; - goto FAILED; - } - ptr++; - } - else ptr--; - break; - - case '=': /* Positive lookahead */ - bravalue = OP_ASSERT; - ptr++; - break; - - case '!': /* Negative lookahead */ - bravalue = OP_ASSERT_NOT; - ptr++; - break; - - case '<': /* Lookbehinds */ - switch (*(++ptr)) - { - case '=': /* Positive lookbehind */ - bravalue = OP_ASSERTBACK; - ptr++; - break; - - case '!': /* Negative lookbehind */ - bravalue = OP_ASSERTBACK_NOT; - ptr++; - break; - - default: /* Syntax error */ - *errorptr = ERR24; - goto FAILED; - } - break; - - case '>': /* One-time brackets */ - bravalue = OP_ONCE; - ptr++; - break; - - case 'R': /* Pattern recursion */ - *code++ = OP_RECURSE; - ptr++; - continue; - - default: /* Option setting */ - set = unset = 0; - optset = &set; - - while (*ptr != ')' && *ptr != ':') - { - switch (*ptr++) - { - case '-': optset = &unset; break; - - case 'i': *optset |= PCRE_CASELESS; break; - case 'm': *optset |= PCRE_MULTILINE; break; - case 's': *optset |= PCRE_DOTALL; break; - case 'x': *optset |= PCRE_EXTENDED; break; - case 'U': *optset |= PCRE_UNGREEDY; break; - case 'X': *optset |= PCRE_EXTRA; break; - - default: - *errorptr = ERR12; - goto FAILED; - } - } - - /* Set up the changed option bits, but don't change anything yet. */ - - newoptions = (options | set) & (~unset); - - /* If the options ended with ')' this is not the start of a nested - group with option changes, so the options change at this level. At top - level there is nothing else to be done (the options will in fact have - been set from the start of compiling as a result of the first pass) but - at an inner level we must compile code to change the ims options if - necessary, and pass the new setting back so that it can be put at the - start of any following branches, and when this group ends, a resetting - item can be compiled. */ - - if (*ptr == ')') - { - if ((options & PCRE_INGROUP) != 0 && - (options & PCRE_IMS) != (newoptions & PCRE_IMS)) - { - *code++ = OP_OPT; - *code++ = *optchanged = newoptions & PCRE_IMS; - } - options = newoptions; /* Change options at this level */ - previous = NULL; /* This item can't be repeated */ - continue; /* It is complete */ - } - - /* If the options ended with ':' we are heading into a nested group - with possible change of options. Such groups are non-capturing and are - not assertions of any kind. All we need to do is skip over the ':'; - the newoptions value is handled below. */ - - bravalue = OP_BRA; - ptr++; - } - } - - /* Else we have a referencing group; adjust the opcode. */ - - else - { - if (++(*brackets) > EXTRACT_MAX) - { - *errorptr = ERR13; - goto FAILED; - } - bravalue = OP_BRA + *brackets; - } - - /* Process nested bracketed re. Assertions may not be repeated, but other - kinds can be. We copy code into a non-register variable in order to be able - to pass its address because some compilers complain otherwise. Pass in a - new setting for the ims options if they have changed. */ - - previous = (bravalue >= OP_ONCE)? code : NULL; - *code = bravalue; - tempcode = code; - - if (!compile_regex( - options | PCRE_INGROUP, /* Set for all nested groups */ - ((options & PCRE_IMS) != (newoptions & PCRE_IMS))? - newoptions & PCRE_IMS : -1, /* Pass ims options if changed */ - brackets, /* Bracket level */ - &tempcode, /* Where to put code (updated) */ - &ptr, /* Input pointer (updated) */ - errorptr, /* Where to put an error message */ - (bravalue == OP_ASSERTBACK || - bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */ - condref, /* Condition reference number */ - &subreqchar, /* For possible last char */ - &subcountlits, /* For literal count */ - cd)) /* Tables block */ - goto FAILED; - - /* At the end of compiling, code is still pointing to the start of the - group, while tempcode has been updated to point past the end of the group - and any option resetting that may follow it. The pattern pointer (ptr) - is on the bracket. */ - - /* If this is a conditional bracket, check that there are no more than - two branches in the group. */ - - if (bravalue == OP_COND) - { - uschar *tc = code; - condcount = 0; - - do { - condcount++; - tc += (tc[1] << 8) | tc[2]; - } - while (*tc != OP_KET); - - if (condcount > 2) - { - *errorptr = ERR27; - goto FAILED; - } - } - - /* Handle updating of the required character. If the subpattern didn't - set one, leave it as it was. Otherwise, update it for normal brackets of - all kinds, forward assertions, and conditions with two branches. Don't - update the literal count for forward assertions, however. If the bracket - is followed by a quantifier with zero repeat, we have to back off. Hence - the definition of prevreqchar and subcountlits outside the main loop so - that they can be accessed for the back off. */ - - if (subreqchar > 0 && - (bravalue >= OP_BRA || bravalue == OP_ONCE || bravalue == OP_ASSERT || - (bravalue == OP_COND && condcount == 2))) - { - prevreqchar = *reqchar; - *reqchar = subreqchar; - if (bravalue != OP_ASSERT) *countlits += subcountlits; - } - - /* Now update the main code pointer to the end of the group. */ - - code = tempcode; - - /* Error if hit end of pattern */ - - if (*ptr != ')') - { - *errorptr = ERR14; - goto FAILED; - } - break; - - /* Check \ for being a real metacharacter; if not, fall through and handle - it as a data character at the start of a string. Escape items are checked - for validity in the pre-compiling pass. */ - - case '\\': - tempptr = ptr; - c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd); - - /* Handle metacharacters introduced by \. For ones like \d, the ESC_ values - are arranged to be the negation of the corresponding OP_values. For the - back references, the values are ESC_REF plus the reference number. Only - back references and those types that consume a character may be repeated. - We can test for values between ESC_b and ESC_Z for the latter; this may - have to change if any new ones are ever created. */ - - if (c < 0) - { - if (-c >= ESC_REF) - { - previous = code; - *code++ = OP_REF; - *code++ = -c - ESC_REF; - } - else - { - previous = (-c > ESC_b && -c < ESC_Z)? code : NULL; - *code++ = -c; - } - continue; - } - - /* Data character: reset and fall through */ - - ptr = tempptr; - c = '\\'; - - /* Handle a run of data characters until a metacharacter is encountered. - The first character is guaranteed not to be whitespace or # when the - extended flag is set. */ - - NORMAL_CHAR: - default: - previous = code; - *code = OP_CHARS; - code += 2; - length = 0; - - do - { - if ((options & PCRE_EXTENDED) != 0) - { - if ((cd->ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != '\n') ; - if (c == 0) break; - continue; - } - } - - /* Backslash may introduce a data char or a metacharacter. Escaped items - are checked for validity in the pre-compiling pass. Stop the string - before a metaitem. */ - - if (c == '\\') - { - tempptr = ptr; - c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd); - if (c < 0) { ptr = tempptr; break; } - - /* If a character is > 127 in UTF-8 mode, we have to turn it into - two or more characters in the UTF-8 encoding. */ - -#ifdef SUPPORT_UTF8 - if (c > 127 && (options & PCRE_UTF8) != 0) - { - uschar buffer[8]; - int len = ord2utf8(c, buffer); - for (c = 0; c < len; c++) *code++ = buffer[c]; - length += len; - continue; - } -#endif - } - - /* Ordinary character or single-char escape */ - - *code++ = c; - length++; - } - - /* This "while" is the end of the "do" above. */ - - while (length < MAXLIT && (cd->ctypes[c = *(++ptr)] & ctype_meta) == 0); - - /* Update the last character and the count of literals */ - - prevreqchar = (length > 1)? code[-2] : *reqchar; - *reqchar = code[-1]; - *countlits += length; - - /* Compute the length and set it in the data vector, and advance to - the next state. */ - - previous[1] = length; - if (length < MAXLIT) ptr--; - break; - } - } /* end of big loop */ - -/* Control never reaches here by falling through, only by a goto for all the -error states. Pass back the position in the pattern so that it can be displayed -to the user for diagnosing the error. */ - -FAILED: -*ptrptr = ptr; -return FALSE; -} - - - - -/************************************************* -* Compile sequence of alternatives * -*************************************************/ - -/* On entry, ptr is pointing past the bracket character, but on return -it points to the closing bracket, or vertical bar, or end of string. -The code variable is pointing at the byte into which the BRA operator has been -stored. If the ims options are changed at the start (for a (?ims: group) or -during any branch, we need to insert an OP_OPT item at the start of every -following branch to ensure they get set correctly at run time, and also pass -the new options into every subsequent branch compile. - -Argument: - options the option bits - optchanged new ims options to set as if (?ims) were at the start, or -1 - for no change - brackets -> int containing the number of extracting brackets used - codeptr -> the address of the current code pointer - ptrptr -> the address of the current pattern pointer - errorptr -> pointer to error message - lookbehind TRUE if this is a lookbehind assertion - condref >= 0 for OPT_CREF setting at start of conditional group - reqchar -> place to put the last required character, or a negative number - countlits -> place to put the shortest literal count of any branch - cd points to the data block with tables pointers - -Returns: TRUE on success -*/ - -static BOOL -compile_regex(int options, int optchanged, int *brackets, uschar **codeptr, - const uschar **ptrptr, const char **errorptr, BOOL lookbehind, int condref, - int *reqchar, int *countlits, compile_data *cd) -{ -const uschar *ptr = *ptrptr; -uschar *code = *codeptr; -uschar *last_branch = code; -uschar *start_bracket = code; -uschar *reverse_count = NULL; -int oldoptions = options & PCRE_IMS; -int branchreqchar, branchcountlits; - -*reqchar = -1; -*countlits = INT_MAX; -code += 3; - -/* At the start of a reference-based conditional group, insert the reference -number as an OP_CREF item. */ - -if (condref >= 0) - { - *code++ = OP_CREF; - *code++ = condref; - } - -/* Loop for each alternative branch */ - -for (;;) - { - int length; - - /* Handle change of options */ - - if (optchanged >= 0) - { - *code++ = OP_OPT; - *code++ = optchanged; - options = (options & ~PCRE_IMS) | optchanged; - } - - /* Set up dummy OP_REVERSE if lookbehind assertion */ - - if (lookbehind) - { - *code++ = OP_REVERSE; - reverse_count = code; - *code++ = 0; - *code++ = 0; - } - - /* Now compile the branch */ - - if (!compile_branch(options, brackets, &code, &ptr, errorptr, &optchanged, - &branchreqchar, &branchcountlits, cd)) - { - *ptrptr = ptr; - return FALSE; - } - - /* Fill in the length of the last branch */ - - length = code - last_branch; - last_branch[1] = length >> 8; - last_branch[2] = length & 255; - - /* Save the last required character if all branches have the same; a current - value of -1 means unset, while -2 means "previous branch had no last required - char". */ - - if (*reqchar != -2) - { - if (branchreqchar >= 0) - { - if (*reqchar == -1) *reqchar = branchreqchar; - else if (*reqchar != branchreqchar) *reqchar = -2; - } - else *reqchar = -2; - } - - /* Keep the shortest literal count */ - - if (branchcountlits < *countlits) *countlits = branchcountlits; - DPRINTF(("literal count = %d min=%d\n", branchcountlits, *countlits)); - - /* If lookbehind, check that this branch matches a fixed-length string, - and put the length into the OP_REVERSE item. Temporarily mark the end of - the branch with OP_END. */ - - if (lookbehind) - { - *code = OP_END; - length = find_fixedlength(last_branch, options); - DPRINTF(("fixed length = %d\n", length)); - if (length < 0) - { - *errorptr = ERR25; - *ptrptr = ptr; - return FALSE; - } - reverse_count[0] = (length >> 8); - reverse_count[1] = length & 255; - } - - /* Reached end of expression, either ')' or end of pattern. Insert a - terminating ket and the length of the whole bracketed item, and return, - leaving the pointer at the terminating char. If any of the ims options - were changed inside the group, compile a resetting op-code following. */ - - if (*ptr != '|') - { - length = code - start_bracket; - *code++ = OP_KET; - *code++ = length >> 8; - *code++ = length & 255; - if (optchanged >= 0) - { - *code++ = OP_OPT; - *code++ = oldoptions; - } - *codeptr = code; - *ptrptr = ptr; - return TRUE; - } - - /* Another branch follows; insert an "or" node and advance the pointer. */ - - *code = OP_ALT; - last_branch = code; - code += 3; - ptr++; - } -/* Control never reaches here */ -} - - - - -/************************************************* -* Find first significant op code * -*************************************************/ - -/* This is called by several functions that scan a compiled expression looking -for a fixed first character, or an anchoring op code etc. It skips over things -that do not influence this. For one application, a change of caseless option is -important. - -Arguments: - code pointer to the start of the group - options pointer to external options - optbit the option bit whose changing is significant, or - zero if none are - optstop TRUE to return on option change, otherwise change the options - value and continue - -Returns: pointer to the first significant opcode -*/ - -static const uschar* -first_significant_code(const uschar *code, int *options, int optbit, - BOOL optstop) -{ -for (;;) - { - switch ((int)*code) - { - case OP_OPT: - if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit)) - { - if (optstop) return code; - *options = (int)code[1]; - } - code += 2; - break; - - case OP_CREF: - code += 2; - break; - - case OP_WORD_BOUNDARY: - case OP_NOT_WORD_BOUNDARY: - code++; - break; - - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - do code += (code[1] << 8) + code[2]; while (*code == OP_ALT); - code += 3; - break; - - default: - return code; - } - } -/* Control never reaches here */ -} - - - - -/************************************************* -* Check for anchored expression * -*************************************************/ - -/* Try to find out if this is an anchored regular expression. Consider each -alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket -all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then -it's anchored. However, if this is a multiline pattern, then only OP_SOD -counts, since OP_CIRC can match in the middle. - -A branch is also implicitly anchored if it starts with .* and DOTALL is set, -because that will try the rest of the pattern at all possible matching points, -so there is no point trying them again. - -Arguments: - code points to start of expression (the bracket) - options points to the options setting - -Returns: TRUE or FALSE -*/ - -static BOOL -is_anchored(register const uschar *code, int *options) -{ -do { - const uschar *scode = first_significant_code(code + 3, options, - PCRE_MULTILINE, FALSE); - register int op = *scode; - if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND) - { if (!is_anchored(scode, options)) return FALSE; } - else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR) && - (*options & PCRE_DOTALL) != 0) - { if (scode[1] != OP_ANY) return FALSE; } - else if (op != OP_SOD && - ((*options & PCRE_MULTILINE) != 0 || op != OP_CIRC)) - return FALSE; - code += (code[1] << 8) + code[2]; - } -while (*code == OP_ALT); -return TRUE; -} - - - -/************************************************* -* Check for starting with ^ or .* * -*************************************************/ - -/* This is called to find out if every branch starts with ^ or .* so that -"first char" processing can be done to speed things up in multiline -matching and for non-DOTALL patterns that start with .* (which must start at -the beginning or after \n). - -Argument: points to start of expression (the bracket) -Returns: TRUE or FALSE -*/ - -static BOOL -is_startline(const uschar *code) -{ -do { - const uschar *scode = first_significant_code(code + 3, NULL, 0, FALSE); - register int op = *scode; - if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND) - { if (!is_startline(scode)) return FALSE; } - else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR) - { if (scode[1] != OP_ANY) return FALSE; } - else if (op != OP_CIRC) return FALSE; - code += (code[1] << 8) + code[2]; - } -while (*code == OP_ALT); -return TRUE; -} - - - -/************************************************* -* Check for fixed first char * -*************************************************/ - -/* Try to find out if there is a fixed first character. This is called for -unanchored expressions, as it speeds up their processing quite considerably. -Consider each alternative branch. If they all start with the same char, or with -a bracket all of whose alternatives start with the same char (recurse ad lib), -then we return that char, otherwise -1. - -Arguments: - code points to start of expression (the bracket) - options pointer to the options (used to check casing changes) - -Returns: -1 or the fixed first char -*/ - -static int -find_firstchar(const uschar *code, int *options) -{ -register int c = -1; -do { - int d; - const uschar *scode = first_significant_code(code + 3, options, - PCRE_CASELESS, TRUE); - register int op = *scode; - - if (op >= OP_BRA) op = OP_BRA; - - switch(op) - { - default: - return -1; - - case OP_BRA: - case OP_ASSERT: - case OP_ONCE: - case OP_COND: - if ((d = find_firstchar(scode, options)) < 0) return -1; - if (c < 0) c = d; else if (c != d) return -1; - break; - - case OP_EXACT: /* Fall through */ - scode++; - - case OP_CHARS: /* Fall through */ - scode++; - - case OP_PLUS: - case OP_MINPLUS: - if (c < 0) c = scode[1]; else if (c != scode[1]) return -1; - break; - } - - code += (code[1] << 8) + code[2]; - } -while (*code == OP_ALT); -return c; -} - - - - - -/************************************************* -* Compile a Regular Expression * -*************************************************/ - -/* This function takes a string and returns a pointer to a block of store -holding a compiled version of the expression. - -Arguments: - pattern the regular expression - options various option bits - errorptr pointer to pointer to error text - erroroffset ptr offset in pattern where error was detected - tables pointer to character tables or NULL - -Returns: pointer to compiled data block, or NULL on error, - with errorptr and erroroffset set -*/ - -pcre * -pcre_compile(const char *pattern, int options, const char **errorptr, - int *erroroffset, const unsigned char *tables) -{ -real_pcre *re; -int length = 3; /* For initial BRA plus length */ -int runlength; -int c, reqchar, countlits; -int bracount = 0; -int top_backref = 0; -int branch_extra = 0; -int branch_newextra; -unsigned int brastackptr = 0; -size_t size; -uschar *code; -const uschar *ptr; -compile_data compile_block; -int brastack[BRASTACK_SIZE]; -uschar bralenstack[BRASTACK_SIZE]; - -#ifdef DEBUG -uschar *code_base, *code_end; -#endif - -/* Can't support UTF8 unless PCRE has been compiled to include the code. */ - -#ifndef SUPPORT_UTF8 -if ((options & PCRE_UTF8) != 0) - { - *errorptr = ERR32; - return NULL; - } -#endif - -/* We can't pass back an error message if errorptr is NULL; I guess the best we -can do is just return NULL. */ - -if (errorptr == NULL) return NULL; -*errorptr = NULL; - -/* However, we can give a message for this error */ - -if (erroroffset == NULL) - { - *errorptr = ERR16; - return NULL; - } -*erroroffset = 0; - -if ((options & ~PUBLIC_OPTIONS) != 0) - { - *errorptr = ERR17; - return NULL; - } - -/* Set up pointers to the individual character tables */ - -if (tables == NULL) tables = pcre_default_tables; -compile_block.lcc = tables + lcc_offset; -compile_block.fcc = tables + fcc_offset; -compile_block.cbits = tables + cbits_offset; -compile_block.ctypes = tables + ctypes_offset; - -/* Reflect pattern for debugging output */ - -DPRINTF(("------------------------------------------------------------------\n")); -DPRINTF(("%s\n", pattern)); - -/* The first thing to do is to make a pass over the pattern to compute the -amount of store required to hold the compiled code. This does not have to be -perfect as long as errors are overestimates. At the same time we can detect any -internal flag settings. Make an attempt to correct for any counted white space -if an "extended" flag setting appears late in the pattern. We can't be so -clever for #-comments. */ - -ptr = (const uschar *)(pattern - 1); -while ((c = *(++ptr)) != 0) - { - int min, max; - int class_charcount; - - if ((options & PCRE_EXTENDED) != 0) - { - if ((compile_block.ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != '\n') ; - continue; - } - } - - switch(c) - { - /* A backslashed item may be an escaped "normal" character or a - character type. For a "normal" character, put the pointers and - character back so that tests for whitespace etc. in the input - are done correctly. */ - - case '\\': - { - const uschar *save_ptr = ptr; - c = check_escape(&ptr, errorptr, bracount, options, FALSE, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (c >= 0) - { - ptr = save_ptr; - c = '\\'; - goto NORMAL_CHAR; - } - } - length++; - - /* A back reference needs an additional char, plus either one or 5 - bytes for a repeat. We also need to keep the value of the highest - back reference. */ - - if (c <= -ESC_REF) - { - int refnum = -c - ESC_REF; - if (refnum > top_backref) top_backref = refnum; - length++; /* For single back reference */ - if (ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block)) - { - ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else length += 5; - if (ptr[1] == '?') ptr++; - } - } - continue; - - case '^': - case '.': - case '$': - case '*': /* These repeats won't be after brackets; */ - case '+': /* those are handled separately */ - case '?': - length++; - continue; - - /* This covers the cases of repeats after a single char, metachar, class, - or back reference. */ - - case '{': - if (!is_counted_repeat(ptr+1, &compile_block)) goto NORMAL_CHAR; - ptr = read_repeat_counts(ptr+1, &min, &max, errorptr, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else - { - length--; /* Uncount the original char or metachar */ - if (min == 1) length++; else if (min > 0) length += 4; - if (max > 0) length += 4; else length += 2; - } - if (ptr[1] == '?') ptr++; - continue; - - /* An alternation contains an offset to the next branch or ket. If any ims - options changed in the previous branch(es), and/or if we are in a - lookbehind assertion, extra space will be needed at the start of the - branch. This is handled by branch_extra. */ - - case '|': - length += 3 + branch_extra; - continue; - - /* A character class uses 33 characters. Don't worry about character types - that aren't allowed in classes - they'll get picked up during the compile. - A character class that contains only one character uses 2 or 3 bytes, - depending on whether it is negated or not. Notice this where we can. */ - - case '[': - class_charcount = 0; - if (*(++ptr) == '^') ptr++; - do - { - if (*ptr == '\\') - { - int ch = check_escape(&ptr, errorptr, bracount, options, TRUE, - &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (-ch == ESC_b) class_charcount++; else class_charcount = 10; - } - else class_charcount++; - ptr++; - } - while (*ptr != 0 && *ptr != ']'); - - /* Repeats for negated single chars are handled by the general code */ - - if (class_charcount == 1) length += 3; else - { - length += 33; - - /* A repeat needs either 1 or 5 bytes. */ - - if (*ptr != 0 && ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block)) - { - ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else length += 5; - if (ptr[1] == '?') ptr++; - } - } - continue; - - /* Brackets may be genuine groups or special things */ - - case '(': - branch_newextra = 0; - - /* Handle special forms of bracket, which all start (? */ - - if (ptr[1] == '?') - { - int set, unset; - int *optset; - - switch (c = ptr[2]) - { - /* Skip over comments entirely */ - case '#': - ptr += 3; - while (*ptr != 0 && *ptr != ')') ptr++; - if (*ptr == 0) - { - *errorptr = ERR18; - goto PCRE_ERROR_RETURN; - } - continue; - - /* Non-referencing groups and lookaheads just move the pointer on, and - then behave like a non-special bracket, except that they don't increment - the count of extracting brackets. Ditto for the "once only" bracket, - which is in Perl from version 5.005. */ - - case ':': - case '=': - case '!': - case '>': - ptr += 2; - break; - - /* A recursive call to the regex is an extension, to provide the - facility which can be obtained by $(?p{perl-code}) in Perl 5.6. */ - - case 'R': - if (ptr[3] != ')') - { - *errorptr = ERR29; - goto PCRE_ERROR_RETURN; - } - ptr += 3; - length += 1; - break; - - /* Lookbehinds are in Perl from version 5.005 */ - - case '<': - if (ptr[3] == '=' || ptr[3] == '!') - { - ptr += 3; - branch_newextra = 3; - length += 3; /* For the first branch */ - break; - } - *errorptr = ERR24; - goto PCRE_ERROR_RETURN; - - /* Conditionals are in Perl from version 5.005. The bracket must either - be followed by a number (for bracket reference) or by an assertion - group. */ - - case '(': - if ((compile_block.ctypes[ptr[3]] & ctype_digit) != 0) - { - ptr += 4; - length += 2; - while ((compile_block.ctypes[*ptr] & ctype_digit) != 0) ptr++; - if (*ptr != ')') - { - *errorptr = ERR26; - goto PCRE_ERROR_RETURN; - } - } - else /* An assertion must follow */ - { - ptr++; /* Can treat like ':' as far as spacing is concerned */ - if (ptr[2] != '?' || - (ptr[3] != '=' && ptr[3] != '!' && ptr[3] != '<') ) - { - ptr += 2; /* To get right offset in message */ - *errorptr = ERR28; - goto PCRE_ERROR_RETURN; - } - } - break; - - /* Else loop checking valid options until ) is met. Anything else is an - error. If we are without any brackets, i.e. at top level, the settings - act as if specified in the options, so massage the options immediately. - This is for backward compatibility with Perl 5.004. */ - - default: - set = unset = 0; - optset = &set; - ptr += 2; - - for (;; ptr++) - { - c = *ptr; - switch (c) - { - case 'i': - *optset |= PCRE_CASELESS; - continue; - - case 'm': - *optset |= PCRE_MULTILINE; - continue; - - case 's': - *optset |= PCRE_DOTALL; - continue; - - case 'x': - *optset |= PCRE_EXTENDED; - continue; - - case 'X': - *optset |= PCRE_EXTRA; - continue; - - case 'U': - *optset |= PCRE_UNGREEDY; - continue; - - case '-': - optset = &unset; - continue; - - /* A termination by ')' indicates an options-setting-only item; - this is global at top level; otherwise nothing is done here and - it is handled during the compiling process on a per-bracket-group - basis. */ - - case ')': - if (brastackptr == 0) - { - options = (options | set) & (~unset); - set = unset = 0; /* To save length */ - } - /* Fall through */ - - /* A termination by ':' indicates the start of a nested group with - the given options set. This is again handled at compile time, but - we must allow for compiled space if any of the ims options are - set. We also have to allow for resetting space at the end of - the group, which is why 4 is added to the length and not just 2. - If there are several changes of options within the same group, this - will lead to an over-estimate on the length, but this shouldn't - matter very much. We also have to allow for resetting options at - the start of any alternations, which we do by setting - branch_newextra to 2. Finally, we record whether the case-dependent - flag ever changes within the regex. This is used by the "required - character" code. */ - - case ':': - if (((set|unset) & PCRE_IMS) != 0) - { - length += 4; - branch_newextra = 2; - if (((set|unset) & PCRE_CASELESS) != 0) options |= PCRE_ICHANGED; - } - goto END_OPTIONS; - - /* Unrecognized option character */ - - default: - *errorptr = ERR12; - goto PCRE_ERROR_RETURN; - } - } - - /* If we hit a closing bracket, that's it - this is a freestanding - option-setting. We need to ensure that branch_extra is updated if - necessary. The only values branch_newextra can have here are 0 or 2. - If the value is 2, then branch_extra must either be 2 or 5, depending - on whether this is a lookbehind group or not. */ - - END_OPTIONS: - if (c == ')') - { - if (branch_newextra == 2 && (branch_extra == 0 || branch_extra == 3)) - branch_extra += branch_newextra; - continue; - } - - /* If options were terminated by ':' control comes here. Fall through - to handle the group below. */ - } - } - - /* Extracting brackets must be counted so we can process escapes in a - Perlish way. */ - - else bracount++; - - /* Non-special forms of bracket. Save length for computing whole length - at end if there's a repeat that requires duplication of the group. Also - save the current value of branch_extra, and start the new group with - the new value. If non-zero, this will either be 2 for a (?imsx: group, or 3 - for a lookbehind assertion. */ - - if (brastackptr >= sizeof(brastack)/sizeof(int)) - { - *errorptr = ERR19; - goto PCRE_ERROR_RETURN; - } - - bralenstack[brastackptr] = branch_extra; - branch_extra = branch_newextra; - - brastack[brastackptr++] = length; - length += 3; - continue; - - /* Handle ket. Look for subsequent max/min; for certain sets of values we - have to replicate this bracket up to that many times. If brastackptr is - 0 this is an unmatched bracket which will generate an error, but take care - not to try to access brastack[-1] when computing the length and restoring - the branch_extra value. */ - - case ')': - length += 3; - { - int minval = 1; - int maxval = 1; - int duplength; - - if (brastackptr > 0) - { - duplength = length - brastack[--brastackptr]; - branch_extra = bralenstack[brastackptr]; - } - else duplength = 0; - - /* Leave ptr at the final char; for read_repeat_counts this happens - automatically; for the others we need an increment. */ - - if ((c = ptr[1]) == '{' && is_counted_repeat(ptr+2, &compile_block)) - { - ptr = read_repeat_counts(ptr+2, &minval, &maxval, errorptr, - &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - } - else if (c == '*') { minval = 0; maxval = -1; ptr++; } - else if (c == '+') { maxval = -1; ptr++; } - else if (c == '?') { minval = 0; ptr++; } - - /* If the minimum is zero, we have to allow for an OP_BRAZERO before the - group, and if the maximum is greater than zero, we have to replicate - maxval-1 times; each replication acquires an OP_BRAZERO plus a nesting - bracket set - hence the 7. */ - - if (minval == 0) - { - length++; - if (maxval > 0) length += (maxval - 1) * (duplength + 7); - } - - /* When the minimum is greater than zero, 1 we have to replicate up to - minval-1 times, with no additions required in the copies. Then, if - there is a limited maximum we have to replicate up to maxval-1 times - allowing for a BRAZERO item before each optional copy and nesting - brackets for all but one of the optional copies. */ - - else - { - length += (minval - 1) * duplength; - if (maxval > minval) /* Need this test as maxval=-1 means no limit */ - length += (maxval - minval) * (duplength + 7) - 6; - } - } - continue; - - /* Non-special character. For a run of such characters the length required - is the number of characters + 2, except that the maximum run length is 255. - We won't get a skipped space or a non-data escape or the start of a # - comment as the first character, so the length can't be zero. */ - - NORMAL_CHAR: - default: - length += 2; - runlength = 0; - do - { - if ((options & PCRE_EXTENDED) != 0) - { - if ((compile_block.ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != '\n') ; - continue; - } - } - - /* Backslash may introduce a data char or a metacharacter; stop the - string before the latter. */ - - if (c == '\\') - { - const uschar *saveptr = ptr; - c = check_escape(&ptr, errorptr, bracount, options, FALSE, - &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (c < 0) { ptr = saveptr; break; } - -#ifdef SUPPORT_UTF8 - if (c > 127 && (options & PCRE_UTF8) != 0) - { - int i; - for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++) - if (c <= utf8_table1[i]) break; - runlength += i; - } -#endif - } - - /* Ordinary character or single-char escape */ - - runlength++; - } - - /* This "while" is the end of the "do" above. */ - - while (runlength < MAXLIT && - (compile_block.ctypes[c = *(++ptr)] & ctype_meta) == 0); - - ptr--; - length += runlength; - continue; - } - } - -length += 4; /* For final KET and END */ - -if (length > 65539) - { - *errorptr = ERR20; - return NULL; - } - -/* Compute the size of data block needed and get it, either from malloc or -externally provided function. We specify "code[0]" in the offsetof() expression -rather than just "code", because it has been reported that one broken compiler -fails on "code" because it is also an independent variable. It should make no -difference to the value of the offsetof(). */ - -size = length + offsetof(real_pcre, code[0]); -re = (real_pcre *)(pcre_malloc)(size); - -if (re == NULL) - { - *errorptr = ERR21; - return NULL; - } - -/* Put in the magic number, and save the size, options, and table pointer */ - -re->magic_number = MAGIC_NUMBER; -re->size = size; -re->options = options; -re->tables = tables; - -/* Set up a starting, non-extracting bracket, then compile the expression. On -error, *errorptr will be set non-NULL, so we don't need to look at the result -of the function here. */ - -ptr = (const uschar *)pattern; -code = re->code; -*code = OP_BRA; -bracount = 0; -(void)compile_regex(options, -1, &bracount, &code, &ptr, errorptr, FALSE, -1, - &reqchar, &countlits, &compile_block); -re->top_bracket = bracount; -re->top_backref = top_backref; - -/* If not reached end of pattern on success, there's an excess bracket. */ - -if (*errorptr == NULL && *ptr != 0) *errorptr = ERR22; - -/* Fill in the terminating state and check for disastrous overflow, but -if debugging, leave the test till after things are printed out. */ - -*code++ = OP_END; - -#ifndef DEBUG -if (code - re->code > length) *errorptr = ERR23; -#endif - -/* Give an error if there's back reference to a non-existent capturing -subpattern. */ - -if (top_backref > re->top_bracket) *errorptr = ERR15; - -/* Failed to compile */ - -if (*errorptr != NULL) - { - (pcre_free)(re); - PCRE_ERROR_RETURN: - *erroroffset = ptr - (const uschar *)pattern; - return NULL; - } - -/* If the anchored option was not passed, set flag if we can determine that the -pattern is anchored by virtue of ^ characters or \A or anything else (such as -starting with .* when DOTALL is set). - -Otherwise, see if we can determine what the first character has to be, because -that speeds up unanchored matches no end. If not, see if we can set the -PCRE_STARTLINE flag. This is helpful for multiline matches when all branches -start with ^. and also when all branches start with .* for non-DOTALL matches. -*/ - -if ((options & PCRE_ANCHORED) == 0) - { - int temp_options = options; - if (is_anchored(re->code, &temp_options)) - re->options |= PCRE_ANCHORED; - else - { - int ch = find_firstchar(re->code, &temp_options); - if (ch >= 0) - { - re->first_char = ch; - re->options |= PCRE_FIRSTSET; - } - else if (is_startline(re->code)) - re->options |= PCRE_STARTLINE; - } - } - -/* Save the last required character if there are at least two literal -characters on all paths, or if there is no first character setting. */ - -if (reqchar >= 0 && (countlits > 1 || (re->options & PCRE_FIRSTSET) == 0)) - { - re->req_char = reqchar; - re->options |= PCRE_REQCHSET; - } - -/* Print out the compiled data for debugging */ - -#ifdef DEBUG - -printf("Length = %d top_bracket = %d top_backref = %d\n", - length, re->top_bracket, re->top_backref); - -if (re->options != 0) - { - printf("%s%s%s%s%s%s%s%s%s\n", - ((re->options & PCRE_ANCHORED) != 0)? "anchored " : "", - ((re->options & PCRE_CASELESS) != 0)? "caseless " : "", - ((re->options & PCRE_ICHANGED) != 0)? "case state changed " : "", - ((re->options & PCRE_EXTENDED) != 0)? "extended " : "", - ((re->options & PCRE_MULTILINE) != 0)? "multiline " : "", - ((re->options & PCRE_DOTALL) != 0)? "dotall " : "", - ((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "", - ((re->options & PCRE_EXTRA) != 0)? "extra " : "", - ((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : ""); - } - -if ((re->options & PCRE_FIRSTSET) != 0) - { - if (isprint(re->first_char)) printf("First char = %c\n", re->first_char); - else printf("First char = \\x%02x\n", re->first_char); - } - -if ((re->options & PCRE_REQCHSET) != 0) - { - if (isprint(re->req_char)) printf("Req char = %c\n", re->req_char); - else printf("Req char = \\x%02x\n", re->req_char); - } - -code_end = code; -code_base = code = re->code; - -while (code < code_end) - { - int charlength; - - printf("%3d ", code - code_base); - - if (*code >= OP_BRA) - { - printf("%3d Bra %d", (code[1] << 8) + code[2], *code - OP_BRA); - code += 2; - } - - else switch(*code) - { - case OP_OPT: - printf(" %.2x %s", code[1], OP_names[*code]); - code++; - break; - - case OP_COND: - printf("%3d Cond", (code[1] << 8) + code[2]); - code += 2; - break; - - case OP_CREF: - printf(" %.2d %s", code[1], OP_names[*code]); - code++; - break; - - case OP_CHARS: - charlength = *(++code); - printf("%3d ", charlength); - while (charlength-- > 0) - if (isprint(c = *(++code))) printf("%c", c); else printf("\\x%02x", c); - break; - - case OP_KETRMAX: - case OP_KETRMIN: - case OP_ALT: - case OP_KET: - case OP_ASSERT: - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - case OP_ONCE: - printf("%3d %s", (code[1] << 8) + code[2], OP_names[*code]); - code += 2; - break; - - case OP_REVERSE: - printf("%3d %s", (code[1] << 8) + code[2], OP_names[*code]); - code += 2; - break; - - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - if (*code >= OP_TYPESTAR) - printf(" %s", OP_names[code[1]]); - else if (isprint(c = code[1])) printf(" %c", c); - else printf(" \\x%02x", c); - printf("%s", OP_names[*code++]); - break; - - case OP_EXACT: - case OP_UPTO: - case OP_MINUPTO: - if (isprint(c = code[3])) printf(" %c{", c); - else printf(" \\x%02x{", c); - if (*code != OP_EXACT) printf("0,"); - printf("%d}", (code[1] << 8) + code[2]); - if (*code == OP_MINUPTO) printf("?"); - code += 3; - break; - - case OP_TYPEEXACT: - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - printf(" %s{", OP_names[code[3]]); - if (*code != OP_TYPEEXACT) printf(","); - printf("%d}", (code[1] << 8) + code[2]); - if (*code == OP_TYPEMINUPTO) printf("?"); - code += 3; - break; - - case OP_NOT: - if (isprint(c = *(++code))) printf(" [^%c]", c); - else printf(" [^\\x%02x]", c); - break; - - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - if (isprint(c = code[1])) printf(" [^%c]", c); - else printf(" [^\\x%02x]", c); - printf("%s", OP_names[*code++]); - break; - - case OP_NOTEXACT: - case OP_NOTUPTO: - case OP_NOTMINUPTO: - if (isprint(c = code[3])) printf(" [^%c]{", c); - else printf(" [^\\x%02x]{", c); - if (*code != OP_NOTEXACT) printf(","); - printf("%d}", (code[1] << 8) + code[2]); - if (*code == OP_NOTMINUPTO) printf("?"); - code += 3; - break; - - case OP_REF: - printf(" \\%d", *(++code)); - code ++; - goto CLASS_REF_REPEAT; - - case OP_CLASS: - { - int i, min, max; - code++; - printf(" ["); - - for (i = 0; i < 256; i++) - { - if ((code[i/8] & (1 << (i&7))) != 0) - { - int j; - for (j = i+1; j < 256; j++) - if ((code[j/8] & (1 << (j&7))) == 0) break; - if (i == '-' || i == ']') printf("\\"); - if (isprint(i)) printf("%c", i); else printf("\\x%02x", i); - if (--j > i) - { - printf("-"); - if (j == '-' || j == ']') printf("\\"); - if (isprint(j)) printf("%c", j); else printf("\\x%02x", j); - } - i = j; - } - } - printf("]"); - code += 32; - - CLASS_REF_REPEAT: - - switch(*code) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - printf("%s", OP_names[*code]); - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - min = (code[1] << 8) + code[2]; - max = (code[3] << 8) + code[4]; - if (max == 0) printf("{%d,}", min); - else printf("{%d,%d}", min, max); - if (*code == OP_CRMINRANGE) printf("?"); - code += 4; - break; - - default: - code--; - } - } - break; - - /* Anything else is just a one-node item */ - - default: - printf(" %s", OP_names[*code]); - break; - } - - code++; - printf("\n"); - } -printf("------------------------------------------------------------------\n"); - -/* This check is done here in the debugging case so that the code that -was compiled can be seen. */ - -if (code - re->code > length) - { - *errorptr = ERR23; - (pcre_free)(re); - *erroroffset = ptr - (uschar *)pattern; - return NULL; - } -#endif - -return (pcre *)re; -} - - - -/************************************************* -* Match a back-reference * -*************************************************/ - -/* If a back reference hasn't been set, the length that is passed is greater -than the number of characters left in the string, so the match fails. - -Arguments: - offset index into the offset vector - eptr points into the subject - length length to be matched - md points to match data block - ims the ims flags - -Returns: TRUE if matched -*/ - -static BOOL -match_ref(int offset, register const uschar *eptr, int length, match_data *md, - unsigned long int ims) -{ -const uschar *p = md->start_subject + md->offset_vector[offset]; - -#ifdef DEBUG -if (eptr >= md->end_subject) - printf("matching subject <null>"); -else - { - printf("matching subject "); - pchars(eptr, length, TRUE, md); - } -printf(" against backref "); -pchars(p, length, FALSE, md); -printf("\n"); -#endif - -/* Always fail if not enough characters left */ - -if (length > md->end_subject - eptr) return FALSE; - -/* Separate the caselesss case for speed */ - -if ((ims & PCRE_CASELESS) != 0) - { - while (length-- > 0) - if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE; - } -else - { while (length-- > 0) if (*p++ != *eptr++) return FALSE; } - -return TRUE; -} - - - -/************************************************* -* Match from current position * -*************************************************/ - -/* On entry ecode points to the first opcode, and eptr to the first character -in the subject string, while eptrb holds the value of eptr at the start of the -last bracketed group - used for breaking infinite loops matching zero-length -strings. - -Arguments: - eptr pointer in subject - ecode position in code - offset_top current top pointer - md pointer to "static" info for the match - ims current /i, /m, and /s options - eptrb pointer to chain of blocks containing eptr at start of - brackets - for testing for empty matches - flags can contain - match_condassert - this is an assertion condition - match_isgroup - this is the start of a bracketed group - -Returns: TRUE if matched -*/ - -static BOOL -match(register const uschar *eptr, register const uschar *ecode, - int offset_top, match_data *md, unsigned long int ims, eptrblock *eptrb, - int flags) -{ -unsigned long int original_ims = ims; /* Save for resetting on ')' */ -eptrblock newptrb; - -/* At the start of a bracketed group, add the current subject pointer to the -stack of such pointers, to be re-instated at the end of the group when we hit -the closing ket. When match() is called in other circumstances, we don't add to -the stack. */ - -if ((flags & match_isgroup) != 0) - { - newptrb.prev = eptrb; - newptrb.saved_eptr = eptr; - eptrb = &newptrb; - } - -/* Now start processing the operations. */ - -for (;;) - { - int op = (int)*ecode; - int min, max, ctype; - register int i; - register int c; - BOOL minimize = FALSE; - - /* Opening capturing bracket. If there is space in the offset vector, save - the current subject position in the working slot at the top of the vector. We - mustn't change the current values of the data slot, because they may be set - from a previous iteration of this group, and be referred to by a reference - inside the group. - - If the bracket fails to match, we need to restore this value and also the - values of the final offsets, in case they were set by a previous iteration of - the same bracket. - - If there isn't enough space in the offset vector, treat this as if it were a - non-capturing bracket. Don't worry about setting the flag for the error case - here; that is handled in the code for KET. */ - - if (op > OP_BRA) - { - int number = op - OP_BRA; - int offset = number << 1; - -#ifdef DEBUG - printf("start bracket %d subject=", number); - pchars(eptr, 16, TRUE, md); - printf("\n"); -#endif - - if (offset < md->offset_max) - { - int save_offset1 = md->offset_vector[offset]; - int save_offset2 = md->offset_vector[offset+1]; - int save_offset3 = md->offset_vector[md->offset_end - number]; - - DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3)); - md->offset_vector[md->offset_end - number] = eptr - md->start_subject; - - do - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - - DPRINTF(("bracket %d failed\n", number)); - - md->offset_vector[offset] = save_offset1; - md->offset_vector[offset+1] = save_offset2; - md->offset_vector[md->offset_end - number] = save_offset3; - return FALSE; - } - - /* Insufficient room for saving captured contents */ - - else op = OP_BRA; - } - - /* Other types of node can be handled by a switch */ - - switch(op) - { - case OP_BRA: /* Non-capturing bracket: optimized */ - DPRINTF(("start bracket 0\n")); - do - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - DPRINTF(("bracket 0 failed\n")); - return FALSE; - - /* Conditional group: compilation checked that there are no more than - two branches. If the condition is false, skipping the first branch takes us - past the end if there is only one branch, but that's OK because that is - exactly what going to the ket would do. */ - - case OP_COND: - if (ecode[3] == OP_CREF) /* Condition is extraction test */ - { - int offset = ecode[4] << 1; /* Doubled reference number */ - return match(eptr, - ecode + ((offset < offset_top && md->offset_vector[offset] >= 0)? - 5 : 3 + (ecode[1] << 8) + ecode[2]), - offset_top, md, ims, eptrb, match_isgroup); - } - - /* The condition is an assertion. Call match() to evaluate it - setting - the final argument TRUE causes it to stop at the end of an assertion. */ - - else - { - if (match(eptr, ecode+3, offset_top, md, ims, NULL, - match_condassert | match_isgroup)) - { - ecode += 3 + (ecode[4] << 8) + ecode[5]; - while (*ecode == OP_ALT) ecode += (ecode[1] << 8) + ecode[2]; - } - else ecode += (ecode[1] << 8) + ecode[2]; - return match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup); - } - /* Control never reaches here */ - - /* Skip over conditional reference data if encountered (should not be) */ - - case OP_CREF: - ecode += 2; - break; - - /* End of the pattern. If PCRE_NOTEMPTY is set, fail if we have matched - an empty string - recursion will then try other alternatives, if any. */ - - case OP_END: - if (md->notempty && eptr == md->start_match) return FALSE; - md->end_match_ptr = eptr; /* Record where we ended */ - md->end_offset_top = offset_top; /* and how many extracts were taken */ - return TRUE; - - /* Change option settings */ - - case OP_OPT: - ims = ecode[1]; - ecode += 2; - DPRINTF(("ims set to %02lx\n", ims)); - break; - - /* Assertion brackets. Check the alternative branches in turn - the - matching won't pass the KET for an assertion. If any one branch matches, - the assertion is true. Lookbehind assertions have an OP_REVERSE item at the - start of each branch to move the current point backwards, so the code at - this level is identical to the lookahead case. */ - - case OP_ASSERT: - case OP_ASSERTBACK: - do - { - if (match(eptr, ecode+3, offset_top, md, ims, NULL, match_isgroup)) break; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - if (*ecode == OP_KET) return FALSE; - - /* If checking an assertion for a condition, return TRUE. */ - - if ((flags & match_condassert) != 0) return TRUE; - - /* Continue from after the assertion, updating the offsets high water - mark, since extracts may have been taken during the assertion. */ - - do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT); - ecode += 3; - offset_top = md->end_offset_top; - continue; - - /* Negative assertion: all branches must fail to match */ - - case OP_ASSERT_NOT: - case OP_ASSERTBACK_NOT: - do - { - if (match(eptr, ecode+3, offset_top, md, ims, NULL, match_isgroup)) - return FALSE; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - - if ((flags & match_condassert) != 0) return TRUE; - - ecode += 3; - continue; - - /* Move the subject pointer back. This occurs only at the start of - each branch of a lookbehind assertion. If we are too close to the start to - move back, this match function fails. When working with UTF-8 we move - back a number of characters, not bytes. */ - - case OP_REVERSE: -#ifdef SUPPORT_UTF8 - c = (ecode[1] << 8) + ecode[2]; - for (i = 0; i < c; i++) - { - eptr--; - BACKCHAR(eptr) - } -#else - eptr -= (ecode[1] << 8) + ecode[2]; -#endif - - if (eptr < md->start_subject) return FALSE; - ecode += 3; - break; - - /* Recursion matches the current regex, nested. If there are any capturing - brackets started but not finished, we have to save their starting points - and reinstate them after the recursion. However, we don't know how many - such there are (offset_top records the completed total) so we just have - to save all the potential data. There may be up to 99 such values, which - is a bit large to put on the stack, but using malloc for small numbers - seems expensive. As a compromise, the stack is used when there are fewer - than 16 values to store; otherwise malloc is used. A problem is what to do - if the malloc fails ... there is no way of returning to the top level with - an error. Save the top 15 values on the stack, and accept that the rest - may be wrong. */ - - case OP_RECURSE: - { - BOOL rc; - int *save; - int stacksave[15]; - - c = md->offset_max; - - if (c < 16) save = stacksave; else - { - save = (int *)(pcre_malloc)((c+1) * sizeof(int)); - if (save == NULL) - { - save = stacksave; - c = 15; - } - } - - for (i = 1; i <= c; i++) - save[i] = md->offset_vector[md->offset_end - i]; - rc = match(eptr, md->start_pattern, offset_top, md, ims, eptrb, - match_isgroup); - for (i = 1; i <= c; i++) - md->offset_vector[md->offset_end - i] = save[i]; - if (save != stacksave) (pcre_free)(save); - if (!rc) return FALSE; - - /* In case the recursion has set more capturing values, save the final - number, then move along the subject till after the recursive match, - and advance one byte in the pattern code. */ - - offset_top = md->end_offset_top; - eptr = md->end_match_ptr; - ecode++; - } - break; - - /* "Once" brackets are like assertion brackets except that after a match, - the point in the subject string is not moved back. Thus there can never be - a move back into the brackets. Check the alternative branches in turn - the - matching won't pass the KET for this kind of subpattern. If any one branch - matches, we carry on as at the end of a normal bracket, leaving the subject - pointer. */ - - case OP_ONCE: - { - const uschar *prev = ecode; - const uschar *saved_eptr = eptr; - - do - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup)) - break; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - - /* If hit the end of the group (which could be repeated), fail */ - - if (*ecode != OP_ONCE && *ecode != OP_ALT) return FALSE; - - /* Continue as from after the assertion, updating the offsets high water - mark, since extracts may have been taken. */ - - do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT); - - offset_top = md->end_offset_top; - eptr = md->end_match_ptr; - - /* For a non-repeating ket, just continue at this level. This also - happens for a repeating ket if no characters were matched in the group. - This is the forcible breaking of infinite loops as implemented in Perl - 5.005. If there is an options reset, it will get obeyed in the normal - course of events. */ - - if (*ecode == OP_KET || eptr == saved_eptr) - { - ecode += 3; - break; - } - - /* The repeating kets try the rest of the pattern or restart from the - preceding bracket, in the appropriate order. We need to reset any options - that changed within the bracket before re-running it, so check the next - opcode. */ - - if (ecode[3] == OP_OPT) - { - ims = (ims & ~PCRE_IMS) | ecode[4]; - DPRINTF(("ims set to %02lx at group repeat\n", ims)); - } - - if (*ecode == OP_KETRMIN) - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, 0) || - match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - } - else /* OP_KETRMAX */ - { - if (match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup) || - match(eptr, ecode+3, offset_top, md, ims, eptrb, 0)) return TRUE; - } - } - return FALSE; - - /* An alternation is the end of a branch; scan along to find the end of the - bracketed group and go to there. */ - - case OP_ALT: - do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT); - break; - - /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating - that it may occur zero times. It may repeat infinitely, or not at all - - i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper - repeat limits are compiled as a number of copies, with the optional ones - preceded by BRAZERO or BRAMINZERO. */ - - case OP_BRAZERO: - { - const uschar *next = ecode+1; - if (match(eptr, next, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - do next += (next[1] << 8) + next[2]; while (*next == OP_ALT); - ecode = next + 3; - } - break; - - case OP_BRAMINZERO: - { - const uschar *next = ecode+1; - do next += (next[1] << 8) + next[2]; while (*next == OP_ALT); - if (match(eptr, next+3, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - ecode++; - } - break; - - /* End of a group, repeated or non-repeating. If we are at the end of - an assertion "group", stop matching and return TRUE, but record the - current high water mark for use by positive assertions. Do this also - for the "once" (not-backup up) groups. */ - - case OP_KET: - case OP_KETRMIN: - case OP_KETRMAX: - { - const uschar *prev = ecode - (ecode[1] << 8) - ecode[2]; - const uschar *saved_eptr = eptrb->saved_eptr; - - eptrb = eptrb->prev; /* Back up the stack of bracket start pointers */ - - if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT || - *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT || - *prev == OP_ONCE) - { - md->end_match_ptr = eptr; /* For ONCE */ - md->end_offset_top = offset_top; - return TRUE; - } - - /* In all other cases except a conditional group we have to check the - group number back at the start and if necessary complete handling an - extraction by setting the offsets and bumping the high water mark. */ - - if (*prev != OP_COND) - { - int number = *prev - OP_BRA; - int offset = number << 1; - -#ifdef DEBUG - printf("end bracket %d", number); - printf("\n"); -#endif - - if (number > 0) - { - if (offset >= md->offset_max) md->offset_overflow = TRUE; else - { - md->offset_vector[offset] = - md->offset_vector[md->offset_end - number]; - md->offset_vector[offset+1] = eptr - md->start_subject; - if (offset_top <= offset) offset_top = offset + 2; - } - } - } - - /* Reset the value of the ims flags, in case they got changed during - the group. */ - - ims = original_ims; - DPRINTF(("ims reset to %02lx\n", ims)); - - /* For a non-repeating ket, just continue at this level. This also - happens for a repeating ket if no characters were matched in the group. - This is the forcible breaking of infinite loops as implemented in Perl - 5.005. If there is an options reset, it will get obeyed in the normal - course of events. */ - - if (*ecode == OP_KET || eptr == saved_eptr) - { - ecode += 3; - break; - } - - /* The repeating kets try the rest of the pattern or restart from the - preceding bracket, in the appropriate order. */ - - if (*ecode == OP_KETRMIN) - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, 0) || - match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - } - else /* OP_KETRMAX */ - { - if (match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup) || - match(eptr, ecode+3, offset_top, md, ims, eptrb, 0)) return TRUE; - } - } - return FALSE; - - /* Start of subject unless notbol, or after internal newline if multiline */ - - case OP_CIRC: - if (md->notbol && eptr == md->start_subject) return FALSE; - if ((ims & PCRE_MULTILINE) != 0) - { - if (eptr != md->start_subject && eptr[-1] != '\n') return FALSE; - ecode++; - break; - } - /* ... else fall through */ - - /* Start of subject assertion */ - - case OP_SOD: - if (eptr != md->start_subject) return FALSE; - ecode++; - break; - - /* Assert before internal newline if multiline, or before a terminating - newline unless endonly is set, else end of subject unless noteol is set. */ - - case OP_DOLL: - if ((ims & PCRE_MULTILINE) != 0) - { - if (eptr < md->end_subject) { if (*eptr != '\n') return FALSE; } - else { if (md->noteol) return FALSE; } - ecode++; - break; - } - else - { - if (md->noteol) return FALSE; - if (!md->endonly) - { - if (eptr < md->end_subject - 1 || - (eptr == md->end_subject - 1 && *eptr != '\n')) return FALSE; - - ecode++; - break; - } - } - /* ... else fall through */ - - /* End of subject assertion (\z) */ - - case OP_EOD: - if (eptr < md->end_subject) return FALSE; - ecode++; - break; - - /* End of subject or ending \n assertion (\Z) */ - - case OP_EODN: - if (eptr < md->end_subject - 1 || - (eptr == md->end_subject - 1 && *eptr != '\n')) return FALSE; - ecode++; - break; - - /* Word boundary assertions */ - - case OP_NOT_WORD_BOUNDARY: - case OP_WORD_BOUNDARY: - { - BOOL prev_is_word = (eptr != md->start_subject) && - ((md->ctypes[eptr[-1]] & ctype_word) != 0); - BOOL cur_is_word = (eptr < md->end_subject) && - ((md->ctypes[*eptr] & ctype_word) != 0); - if ((*ecode++ == OP_WORD_BOUNDARY)? - cur_is_word == prev_is_word : cur_is_word != prev_is_word) - return FALSE; - } - break; - - /* Match a single character type; inline for speed */ - - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0 && eptr < md->end_subject && *eptr == '\n') - return FALSE; - if (eptr++ >= md->end_subject) return FALSE; -#ifdef SUPPORT_UTF8 - if (md->utf8) - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; -#endif - ecode++; - break; - - case OP_NOT_DIGIT: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_digit) != 0) - return FALSE; - ecode++; - break; - - case OP_DIGIT: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_digit) == 0) - return FALSE; - ecode++; - break; - - case OP_NOT_WHITESPACE: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_space) != 0) - return FALSE; - ecode++; - break; - - case OP_WHITESPACE: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_space) == 0) - return FALSE; - ecode++; - break; - - case OP_NOT_WORDCHAR: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_word) != 0) - return FALSE; - ecode++; - break; - - case OP_WORDCHAR: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_word) == 0) - return FALSE; - ecode++; - break; - - /* Match a back reference, possibly repeatedly. Look past the end of the - item to see if there is repeat information following. The code is similar - to that for character classes, but repeated for efficiency. Then obey - similar code to character type repeats - written out again for speed. - However, if the referenced string is the empty string, always treat - it as matched, any number of times (otherwise there could be infinite - loops). */ - - case OP_REF: - { - int length; - int offset = ecode[1] << 1; /* Doubled reference number */ - ecode += 2; /* Advance past the item */ - - /* If the reference is unset, set the length to be longer than the amount - of subject left; this ensures that every attempt at a match fails. We - can't just fail here, because of the possibility of quantifiers with zero - minima. */ - - length = (offset >= offset_top || md->offset_vector[offset] < 0)? - md->end_subject - eptr + 1 : - md->offset_vector[offset+1] - md->offset_vector[offset]; - - /* Set up for repetition, or handle the non-repeated case */ - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - c = *ecode++ - OP_CRSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - minimize = (*ecode == OP_CRMINRANGE); - min = (ecode[1] << 8) + ecode[2]; - max = (ecode[3] << 8) + ecode[4]; - if (max == 0) max = INT_MAX; - ecode += 5; - break; - - default: /* No repeat follows */ - if (!match_ref(offset, eptr, length, md, ims)) return FALSE; - eptr += length; - continue; /* With the main loop */ - } - - /* If the length of the reference is zero, just continue with the - main loop. */ - - if (length == 0) continue; - - /* First, ensure the minimum number of matches are present. We get back - the length of the reference string explicitly rather than passing the - address of eptr, so that eptr can be a register variable. */ - - for (i = 1; i <= min; i++) - { - if (!match_ref(offset, eptr, length, md, ims)) return FALSE; - eptr += length; - } - - /* If min = max, continue at the same level without recursion. - They are not both allowed to be zero. */ - - if (min == max) continue; - - /* If minimizing, keep trying and advancing the pointer */ - - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || !match_ref(offset, eptr, length, md, ims)) - return FALSE; - eptr += length; - } - /* Control never gets here */ - } - - /* If maximizing, find the longest string and work backwards */ - - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (!match_ref(offset, eptr, length, md, ims)) break; - eptr += length; - } - while (eptr >= pp) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - eptr -= length; - } - return FALSE; - } - } - /* Control never gets here */ - - - - /* Match a character class, possibly repeatedly. Look past the end of the - item to see if there is repeat information following. Then obey similar - code to character type repeats - written out again for speed. */ - - case OP_CLASS: - { - const uschar *data = ecode + 1; /* Save for matching */ - ecode += 33; /* Advance past the item */ - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - c = *ecode++ - OP_CRSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - minimize = (*ecode == OP_CRMINRANGE); - min = (ecode[1] << 8) + ecode[2]; - max = (ecode[3] << 8) + ecode[4]; - if (max == 0) max = INT_MAX; - ecode += 5; - break; - - default: /* No repeat follows */ - min = max = 1; - break; - } - - /* First, ensure the minimum number of matches are present. */ - - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject) return FALSE; - GETCHARINC(c, eptr) /* Get character; increment eptr */ - -#ifdef SUPPORT_UTF8 - /* We do not yet support class members > 255 */ - if (c > 255) return FALSE; -#endif - - if ((data[c/8] & (1 << (c&7))) != 0) continue; - return FALSE; - } - - /* If max == min we can continue with the main loop without the - need to recurse. */ - - if (min == max) continue; - - /* If minimizing, keep testing the rest of the expression and advancing - the pointer while it matches the class. */ - - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject) return FALSE; - GETCHARINC(c, eptr) /* Get character; increment eptr */ - -#ifdef SUPPORT_UTF8 - /* We do not yet support class members > 255 */ - if (c > 255) return FALSE; -#endif - if ((data[c/8] & (1 << (c&7))) != 0) continue; - return FALSE; - } - /* Control never gets here */ - } - - /* If maximizing, find the longest possible run, then work backwards. */ - - else - { - const uschar *pp = eptr; - int len = 1; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len) /* Get character, set length if UTF-8 */ - -#ifdef SUPPORT_UTF8 - /* We do not yet support class members > 255 */ - if (c > 255) break; -#endif - if ((data[c/8] & (1 << (c&7))) == 0) break; - eptr += len; - } - - while (eptr >= pp) - { - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - -#ifdef SUPPORT_UTF8 - BACKCHAR(eptr) -#endif - } - return FALSE; - } - } - /* Control never gets here */ - - /* Match a run of characters */ - - case OP_CHARS: - { - register int length = ecode[1]; - ecode += 2; - -#ifdef DEBUG /* Sigh. Some compilers never learn. */ - if (eptr >= md->end_subject) - printf("matching subject <null> against pattern "); - else - { - printf("matching subject "); - pchars(eptr, length, TRUE, md); - printf(" against pattern "); - } - pchars(ecode, length, FALSE, md); - printf("\n"); -#endif - - if (length > md->end_subject - eptr) return FALSE; - if ((ims & PCRE_CASELESS) != 0) - { - while (length-- > 0) - if (md->lcc[*ecode++] != md->lcc[*eptr++]) - return FALSE; - } - else - { - while (length-- > 0) if (*ecode++ != *eptr++) return FALSE; - } - } - break; - - /* Match a single character repeatedly; different opcodes share code. */ - - case OP_EXACT: - min = max = (ecode[1] << 8) + ecode[2]; - ecode += 3; - goto REPEATCHAR; - - case OP_UPTO: - case OP_MINUPTO: - min = 0; - max = (ecode[1] << 8) + ecode[2]; - minimize = *ecode == OP_MINUPTO; - ecode += 3; - goto REPEATCHAR; - - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - c = *ecode++ - OP_STAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single-character matches. We can give - up quickly if there are fewer than the minimum number of characters left in - the subject. */ - - REPEATCHAR: - if (min > md->end_subject - eptr) return FALSE; - c = *ecode++; - - /* The code is duplicated for the caseless and caseful cases, for speed, - since matching characters is likely to be quite common. First, ensure the - minimum number of matches are present. If min = max, continue at the same - level without recursing. Otherwise, if minimizing, keep trying the rest of - the expression and advancing one matching character if failing, up to the - maximum. Alternatively, if maximizing, find the maximum number of - characters and work backwards. */ - - DPRINTF(("matching %c{%d,%d} against subject %.*s\n", c, min, max, - max, eptr)); - - if ((ims & PCRE_CASELESS) != 0) - { - c = md->lcc[c]; - for (i = 1; i <= min; i++) - if (c != md->lcc[*eptr++]) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || - c != md->lcc[*eptr++]) - return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c != md->lcc[*eptr]) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - /* Control never gets here */ - } - - /* Caseful comparisons */ - - else - { - for (i = 1; i <= min; i++) if (c != *eptr++) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || c != *eptr++) return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c != *eptr) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - } - /* Control never gets here */ - - /* Match a negated single character */ - - case OP_NOT: - if (eptr >= md->end_subject) return FALSE; - ecode++; - if ((ims & PCRE_CASELESS) != 0) - { - if (md->lcc[*ecode++] == md->lcc[*eptr++]) return FALSE; - } - else - { - if (*ecode++ == *eptr++) return FALSE; - } - break; - - /* Match a negated single character repeatedly. This is almost a repeat of - the code for a repeated single character, but I haven't found a nice way of - commoning these up that doesn't require a test of the positive/negative - option for each character match. Maybe that wouldn't add very much to the - time taken, but character matching *is* what this is all about... */ - - case OP_NOTEXACT: - min = max = (ecode[1] << 8) + ecode[2]; - ecode += 3; - goto REPEATNOTCHAR; - - case OP_NOTUPTO: - case OP_NOTMINUPTO: - min = 0; - max = (ecode[1] << 8) + ecode[2]; - minimize = *ecode == OP_NOTMINUPTO; - ecode += 3; - goto REPEATNOTCHAR; - - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - c = *ecode++ - OP_NOTSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single-character matches. We can give - up quickly if there are fewer than the minimum number of characters left in - the subject. */ - - REPEATNOTCHAR: - if (min > md->end_subject - eptr) return FALSE; - c = *ecode++; - - /* The code is duplicated for the caseless and caseful cases, for speed, - since matching characters is likely to be quite common. First, ensure the - minimum number of matches are present. If min = max, continue at the same - level without recursing. Otherwise, if minimizing, keep trying the rest of - the expression and advancing one matching character if failing, up to the - maximum. Alternatively, if maximizing, find the maximum number of - characters and work backwards. */ - - DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", c, min, max, - max, eptr)); - - if ((ims & PCRE_CASELESS) != 0) - { - c = md->lcc[c]; - for (i = 1; i <= min; i++) - if (c == md->lcc[*eptr++]) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || - c == md->lcc[*eptr++]) - return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c == md->lcc[*eptr]) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - /* Control never gets here */ - } - - /* Caseful comparisons */ - - else - { - for (i = 1; i <= min; i++) if (c == *eptr++) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || c == *eptr++) return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c == *eptr) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - } - /* Control never gets here */ - - /* Match a single character type repeatedly; several different opcodes - share code. This is very similar to the code for single characters, but we - repeat it in the interests of efficiency. */ - - case OP_TYPEEXACT: - min = max = (ecode[1] << 8) + ecode[2]; - minimize = TRUE; - ecode += 3; - goto REPEATTYPE; - - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - min = 0; - max = (ecode[1] << 8) + ecode[2]; - minimize = *ecode == OP_TYPEMINUPTO; - ecode += 3; - goto REPEATTYPE; - - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - c = *ecode++ - OP_TYPESTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single character type matches */ - - REPEATTYPE: - ctype = *ecode++; /* Code for the character type */ - - /* First, ensure the minimum number of matches are present. Use inline - code for maximizing the speed, and do the type test once at the start - (i.e. keep it out of the loop). Also we can test that there are at least - the minimum number of bytes before we start, except when doing '.' in - UTF8 mode. Leave the test in in all cases; in the special case we have - to test after each character. */ - - if (min > md->end_subject - eptr) return FALSE; - if (min > 0) switch(ctype) - { - case OP_ANY: -#ifdef SUPPORT_UTF8 - if (md->utf8) - { - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - (*eptr++ == '\n' && (ims & PCRE_DOTALL) == 0)) - return FALSE; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - break; - } -#endif - /* Non-UTF8 can be faster */ - if ((ims & PCRE_DOTALL) == 0) - { for (i = 1; i <= min; i++) if (*eptr++ == '\n') return FALSE; } - else eptr += min; - break; - - case OP_NOT_DIGIT: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_digit) != 0) return FALSE; - break; - - case OP_DIGIT: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_digit) == 0) return FALSE; - break; - - case OP_NOT_WHITESPACE: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_space) != 0) return FALSE; - break; - - case OP_WHITESPACE: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_space) == 0) return FALSE; - break; - - case OP_NOT_WORDCHAR: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_word) != 0) - return FALSE; - break; - - case OP_WORDCHAR: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_word) == 0) - return FALSE; - break; - } - - /* If min = max, continue at the same level without recursing */ - - if (min == max) continue; - - /* If minimizing, we have to test the rest of the pattern before each - subsequent match. */ - - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) return TRUE; - if (i >= max || eptr >= md->end_subject) return FALSE; - - c = *eptr++; - switch(ctype) - { - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0 && c == '\n') return FALSE; -#ifdef SUPPORT_UTF8 - if (md->utf8) - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; -#endif - break; - - case OP_NOT_DIGIT: - if ((md->ctypes[c] & ctype_digit) != 0) return FALSE; - break; - - case OP_DIGIT: - if ((md->ctypes[c] & ctype_digit) == 0) return FALSE; - break; - - case OP_NOT_WHITESPACE: - if ((md->ctypes[c] & ctype_space) != 0) return FALSE; - break; - - case OP_WHITESPACE: - if ((md->ctypes[c] & ctype_space) == 0) return FALSE; - break; - - case OP_NOT_WORDCHAR: - if ((md->ctypes[c] & ctype_word) != 0) return FALSE; - break; - - case OP_WORDCHAR: - if ((md->ctypes[c] & ctype_word) == 0) return FALSE; - break; - } - } - /* Control never gets here */ - } - - /* If maximizing it is worth using inline code for speed, doing the type - test once at the start (i.e. keep it out of the loop). */ - - else - { - const uschar *pp = eptr; - switch(ctype) - { - case OP_ANY: - - /* Special code is required for UTF8, but when the maximum is unlimited - we don't need it. */ - -#ifdef SUPPORT_UTF8 - if (md->utf8 && max < INT_MAX) - { - if ((ims & PCRE_DOTALL) == 0) - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || *eptr++ == '\n') break; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - } - else - { - for (i = min; i < max; i++) - { - eptr++; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - } - break; - } -#endif - /* Non-UTF8 can be faster */ - if ((ims & PCRE_DOTALL) == 0) - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || *eptr == '\n') break; - eptr++; - } - } - else - { - c = max - min; - if (c > md->end_subject - eptr) c = md->end_subject - eptr; - eptr += c; - } - break; - - case OP_NOT_DIGIT: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) != 0) - break; - eptr++; - } - break; - - case OP_DIGIT: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) == 0) - break; - eptr++; - } - break; - - case OP_NOT_WHITESPACE: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) != 0) - break; - eptr++; - } - break; - - case OP_WHITESPACE: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) == 0) - break; - eptr++; - } - break; - - case OP_NOT_WORDCHAR: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) != 0) - break; - eptr++; - } - break; - - case OP_WORDCHAR: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) == 0) - break; - eptr++; - } - break; - } - - while (eptr >= pp) - { - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; -#ifdef SUPPORT_UTF8 - if (md->utf8) - while (eptr > pp && (*eptr & 0xc0) == 0x80) eptr--; -#endif - } - return FALSE; - } - /* Control never gets here */ - - /* There's been some horrible disaster. */ - - default: - DPRINTF(("Unknown opcode %d\n", *ecode)); - md->errorcode = PCRE_ERROR_UNKNOWN_NODE; - return FALSE; - } - - /* Do not stick any code in here without much thought; it is assumed - that "continue" in the code above comes out to here to repeat the main - loop. */ - - } /* End of main loop */ -/* Control never reaches here */ -} - - - - -/************************************************* -* Execute a Regular Expression * -*************************************************/ - -/* This function applies a compiled re to a subject string and picks out -portions of the string if it matches. Two elements in the vector are set for -each substring: the offsets to the start and end of the substring. - -Arguments: - external_re points to the compiled expression - external_extra points to "hints" from pcre_study() or is NULL - subject points to the subject string - length length of subject string (may contain binary zeros) - start_offset where to start in the subject string - options option bits - offsets points to a vector of ints to be filled in with offsets - offsetcount the number of elements in the vector - -Returns: > 0 => success; value is the number of elements filled in - = 0 => success, but offsets is not big enough - -1 => failed to match - < -1 => some kind of unexpected problem -*/ - -int -pcre_exec(const pcre *external_re, const pcre_extra *external_extra, - const char *subject, int length, int start_offset, int options, int *offsets, - int offsetcount) -{ -int resetcount, ocount; -int first_char = -1; -int req_char = -1; -int req_char2 = -1; -unsigned long int ims = 0; -match_data match_block; -const uschar *start_bits = NULL; -const uschar *start_match = (const uschar *)subject + start_offset; -const uschar *end_subject; -const uschar *req_char_ptr = start_match - 1; -const real_pcre *re = (const real_pcre *)external_re; -const real_pcre_extra *extra = (const real_pcre_extra *)external_extra; -BOOL using_temporary_offsets = FALSE; -BOOL anchored = ((re->options | options) & PCRE_ANCHORED) != 0; -BOOL startline = (re->options & PCRE_STARTLINE) != 0; - -if ((options & ~PUBLIC_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; - -if (re == NULL || subject == NULL || - (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; - -match_block.start_pattern = re->code; -match_block.start_subject = (const uschar *)subject; -match_block.end_subject = match_block.start_subject + length; -end_subject = match_block.end_subject; - -match_block.endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0; -match_block.utf8 = (re->options & PCRE_UTF8) != 0; - -match_block.notbol = (options & PCRE_NOTBOL) != 0; -match_block.noteol = (options & PCRE_NOTEOL) != 0; -match_block.notempty = (options & PCRE_NOTEMPTY) != 0; - -match_block.errorcode = PCRE_ERROR_NOMATCH; /* Default error */ - -match_block.lcc = re->tables + lcc_offset; -match_block.ctypes = re->tables + ctypes_offset; - -/* The ims options can vary during the matching as a result of the presence -of (?ims) items in the pattern. They are kept in a local variable so that -restoring at the exit of a group is easy. */ - -ims = re->options & (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL); - -/* If the expression has got more back references than the offsets supplied can -hold, we get a temporary bit of working store to use during the matching. -Otherwise, we can use the vector supplied, rounding down its size to a multiple -of 3. */ - -ocount = offsetcount - (offsetcount % 3); - -if (re->top_backref > 0 && re->top_backref >= ocount/3) - { - ocount = re->top_backref * 3 + 3; - match_block.offset_vector = (int *)(pcre_malloc)(ocount * sizeof(int)); - if (match_block.offset_vector == NULL) return PCRE_ERROR_NOMEMORY; - using_temporary_offsets = TRUE; - DPRINTF(("Got memory to hold back references\n")); - } -else match_block.offset_vector = offsets; - -match_block.offset_end = ocount; -match_block.offset_max = (2*ocount)/3; -match_block.offset_overflow = FALSE; - -/* Compute the minimum number of offsets that we need to reset each time. Doing -this makes a huge difference to execution time when there aren't many brackets -in the pattern. */ - -resetcount = 2 + re->top_bracket * 2; -if (resetcount > offsetcount) resetcount = ocount; - -/* Reset the working variable associated with each extraction. These should -never be used unless previously set, but they get saved and restored, and so we -initialize them to avoid reading uninitialized locations. */ - -if (match_block.offset_vector != NULL) - { - register int *iptr = match_block.offset_vector + ocount; - register int *iend = iptr - resetcount/2 + 1; - while (--iptr >= iend) *iptr = -1; - } - -/* Set up the first character to match, if available. The first_char value is -never set for an anchored regular expression, but the anchoring may be forced -at run time, so we have to test for anchoring. The first char may be unset for -an unanchored pattern, of course. If there's no first char and the pattern was -studied, there may be a bitmap of possible first characters. */ - -if (!anchored) - { - if ((re->options & PCRE_FIRSTSET) != 0) - { - first_char = re->first_char; - if ((ims & PCRE_CASELESS) != 0) first_char = match_block.lcc[first_char]; - } - else - if (!startline && extra != NULL && - (extra->options & PCRE_STUDY_MAPPED) != 0) - start_bits = extra->start_bits; - } - -/* For anchored or unanchored matches, there may be a "last known required -character" set. If the PCRE_CASELESS is set, implying that the match starts -caselessly, or if there are any changes of this flag within the regex, set up -both cases of the character. Otherwise set the two values the same, which will -avoid duplicate testing (which takes significant time). This covers the vast -majority of cases. It will be suboptimal when the case flag changes in a regex -and the required character in fact is caseful. */ - -if ((re->options & PCRE_REQCHSET) != 0) - { - req_char = re->req_char; - req_char2 = ((re->options & (PCRE_CASELESS | PCRE_ICHANGED)) != 0)? - (re->tables + fcc_offset)[req_char] : req_char; - } - -/* Loop for handling unanchored repeated matching attempts; for anchored regexs -the loop runs just once. */ - -do - { - int rc; - register int *iptr = match_block.offset_vector; - register int *iend = iptr + resetcount; - - /* Reset the maximum number of extractions we might see. */ - - while (iptr < iend) *iptr++ = -1; - - /* Advance to a unique first char if possible */ - - if (first_char >= 0) - { - if ((ims & PCRE_CASELESS) != 0) - while (start_match < end_subject && - match_block.lcc[*start_match] != first_char) - start_match++; - else - while (start_match < end_subject && *start_match != first_char) - start_match++; - } - - /* Or to just after \n for a multiline match if possible */ - - else if (startline) - { - if (start_match > match_block.start_subject + start_offset) - { - while (start_match < end_subject && start_match[-1] != '\n') - start_match++; - } - } - - /* Or to a non-unique first char after study */ - - else if (start_bits != NULL) - { - while (start_match < end_subject) - { - register int c = *start_match; - if ((start_bits[c/8] & (1 << (c&7))) == 0) start_match++; else break; - } - } - -#ifdef DEBUG /* Sigh. Some compilers never learn. */ - printf(">>>> Match against: "); - pchars(start_match, end_subject - start_match, TRUE, &match_block); - printf("\n"); -#endif - - /* If req_char is set, we know that that character must appear in the subject - for the match to succeed. If the first character is set, req_char must be - later in the subject; otherwise the test starts at the match point. This - optimization can save a huge amount of backtracking in patterns with nested - unlimited repeats that aren't going to match. We don't know what the state of - case matching may be when this character is hit, so test for it in both its - cases if necessary. However, the different cased versions will not be set up - unless PCRE_CASELESS was given or the casing state changes within the regex. - Writing separate code makes it go faster, as does using an autoincrement and - backing off on a match. */ - - if (req_char >= 0) - { - register const uschar *p = start_match + ((first_char >= 0)? 1 : 0); - - /* We don't need to repeat the search if we haven't yet reached the - place we found it at last time. */ - - if (p > req_char_ptr) - { - /* Do a single test if no case difference is set up */ - - if (req_char == req_char2) - { - while (p < end_subject) - { - if (*p++ == req_char) { p--; break; } - } - } - - /* Otherwise test for either case */ - - else - { - while (p < end_subject) - { - register int pp = *p++; - if (pp == req_char || pp == req_char2) { p--; break; } - } - } - - /* If we can't find the required character, break the matching loop */ - - if (p >= end_subject) break; - - /* If we have found the required character, save the point where we - found it, so that we don't search again next time round the loop if - the start hasn't passed this character yet. */ - - req_char_ptr = p; - } - } - - /* When a match occurs, substrings will be set for all internal extractions; - we just need to set up the whole thing as substring 0 before returning. If - there were too many extractions, set the return code to zero. In the case - where we had to get some local store to hold offsets for backreferences, copy - those back references that we can. In this case there need not be overflow - if certain parts of the pattern were not used. */ - - match_block.start_match = start_match; - if (!match(start_match, re->code, 2, &match_block, ims, NULL, match_isgroup)) - continue; - - /* Copy the offset information from temporary store if necessary */ - - if (using_temporary_offsets) - { - if (offsetcount >= 4) - { - memcpy(offsets + 2, match_block.offset_vector + 2, - (offsetcount - 2) * sizeof(int)); - DPRINTF(("Copied offsets from temporary memory\n")); - } - if (match_block.end_offset_top > offsetcount) - match_block.offset_overflow = TRUE; - - DPRINTF(("Freeing temporary memory\n")); - (pcre_free)(match_block.offset_vector); - } - - rc = match_block.offset_overflow? 0 : match_block.end_offset_top/2; - - if (match_block.offset_end < 2) rc = 0; else - { - offsets[0] = start_match - match_block.start_subject; - offsets[1] = match_block.end_match_ptr - match_block.start_subject; - } - - DPRINTF((">>>> returning %d\n", rc)); - return rc; - } - -/* This "while" is the end of the "do" above */ - -while (!anchored && - match_block.errorcode == PCRE_ERROR_NOMATCH && - start_match++ < end_subject); - -if (using_temporary_offsets) - { - DPRINTF(("Freeing temporary memory\n")); - (pcre_free)(match_block.offset_vector); - } - -DPRINTF((">>>> returning %d\n", match_block.errorcode)); - -return match_block.errorcode; -} - -/* End of pcre.c */ diff --git a/external/privoxy/pcre/pcre.def b/external/privoxy/pcre/pcre.def deleted file mode 100644 index 0e8cf3f..0000000 --- a/external/privoxy/pcre/pcre.def +++ /dev/null @@ -1,19 +0,0 @@ -EXPORTS - -pcre_malloc DATA -pcre_free DATA - -pcre_compile -pcre_copy_substring -pcre_exec -pcre_get_substring -pcre_get_substring_list -pcre_info -pcre_maketables -pcre_study -pcre_version - -regcomp -regexec -regerror -regfree diff --git a/external/privoxy/pcre/pcre.h b/external/privoxy/pcre/pcre.h deleted file mode 100644 index d27ba85..0000000 --- a/external/privoxy/pcre/pcre.h +++ /dev/null @@ -1,110 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* Copyright (c) 1997-2000 University of Cambridge */ - -#ifndef _PCRE_H -#define _PCRE_H - -/* The file pcre.h is build by "configure". Do not edit it; instead -make changes to pcre.in. */ - -#define PCRE_MAJOR 3 -#define PCRE_MINOR 4 -#define PCRE_DATE 22-Aug-2000 - -/* Win32 uses DLL by default */ - -#ifdef _WIN32 -# ifdef STATIC_PCRE -# define PCRE_DL_IMPORT -# else -# define PCRE_DL_IMPORT __declspec(dllimport) -# endif -#else -# define PCRE_DL_IMPORT -#endif - -/* Have to include stdlib.h in order to ensure that size_t is defined; -it is needed here for malloc. */ - -#include <stdlib.h> - -/* Allow for C++ users */ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Options */ - -#define PCRE_CASELESS 0x0001 -#define PCRE_MULTILINE 0x0002 -#define PCRE_DOTALL 0x0004 -#define PCRE_EXTENDED 0x0008 -#define PCRE_ANCHORED 0x0010 -#define PCRE_DOLLAR_ENDONLY 0x0020 -#define PCRE_EXTRA 0x0040 -#define PCRE_NOTBOL 0x0080 -#define PCRE_NOTEOL 0x0100 -#define PCRE_UNGREEDY 0x0200 -#define PCRE_NOTEMPTY 0x0400 -#define PCRE_UTF8 0x0800 - -/* Exec-time and get-time error codes */ - -#define PCRE_ERROR_NOMATCH (-1) -#define PCRE_ERROR_NULL (-2) -#define PCRE_ERROR_BADOPTION (-3) -#define PCRE_ERROR_BADMAGIC (-4) -#define PCRE_ERROR_UNKNOWN_NODE (-5) -#define PCRE_ERROR_NOMEMORY (-6) -#define PCRE_ERROR_NOSUBSTRING (-7) - -/* Request types for pcre_fullinfo() */ - -#define PCRE_INFO_OPTIONS 0 -#define PCRE_INFO_SIZE 1 -#define PCRE_INFO_CAPTURECOUNT 2 -#define PCRE_INFO_BACKREFMAX 3 -#define PCRE_INFO_FIRSTCHAR 4 -#define PCRE_INFO_FIRSTTABLE 5 -#define PCRE_INFO_LASTLITERAL 6 - -/* Types */ - -typedef void pcre; -typedef void pcre_extra; - -/* Store get and free functions. These can be set to alternative malloc/free -functions if required. Some magic is required for Win32 DLL; it is null on -other OS. */ - -PCRE_DL_IMPORT extern void *(*pcre_malloc)(size_t); -PCRE_DL_IMPORT extern void (*pcre_free)(void *); - -#undef PCRE_DL_IMPORT - -/* Functions */ - -extern pcre *pcre_compile(const char *, int, const char **, int *, - const unsigned char *); -extern int pcre_copy_substring(const char *, int *, int, int, char *, int); -extern int pcre_exec(const pcre *, const pcre_extra *, const char *, - int, int, int, int *, int); -extern void pcre_free_substring(const char *); -extern void pcre_free_substring_list(const char **); -extern int pcre_get_substring(const char *, int *, int, int, const char **); -extern int pcre_get_substring_list(const char *, int *, int, const char ***); -extern int pcre_info(const pcre *, int *, int *); -extern int pcre_fullinfo(const pcre *, const pcre_extra *, int, void *); -extern unsigned const char *pcre_maketables(void); -extern pcre_extra *pcre_study(const pcre *, int, const char **); -extern const char *pcre_version(void); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* End of pcre.h */ diff --git a/external/privoxy/pcre/pcre.in b/external/privoxy/pcre/pcre.in deleted file mode 100644 index d698f40..0000000 --- a/external/privoxy/pcre/pcre.in +++ /dev/null @@ -1,110 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* Copyright (c) 1997-2000 University of Cambridge */ - -#ifndef _PCRE_H -#define _PCRE_H - -/* The file pcre.h is build by "configure". Do not edit it; instead -make changes to pcre.in. */ - -#define PCRE_MAJOR @PCRE_MAJOR@ -#define PCRE_MINOR @PCRE_MINOR@ -#define PCRE_DATE @PCRE_DATE@ - -/* Win32 uses DLL by default */ - -#ifdef _WIN32 -# ifdef STATIC_PCRE -# define PCRE_DL_IMPORT -# else -# define PCRE_DL_IMPORT __declspec(dllimport) -# endif -#else -# define PCRE_DL_IMPORT -#endif - -/* Have to include stdlib.h in order to ensure that size_t is defined; -it is needed here for malloc. */ - -#include <stdlib.h> - -/* Allow for C++ users */ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Options */ - -#define PCRE_CASELESS 0x0001 -#define PCRE_MULTILINE 0x0002 -#define PCRE_DOTALL 0x0004 -#define PCRE_EXTENDED 0x0008 -#define PCRE_ANCHORED 0x0010 -#define PCRE_DOLLAR_ENDONLY 0x0020 -#define PCRE_EXTRA 0x0040 -#define PCRE_NOTBOL 0x0080 -#define PCRE_NOTEOL 0x0100 -#define PCRE_UNGREEDY 0x0200 -#define PCRE_NOTEMPTY 0x0400 -#define PCRE_UTF8 0x0800 - -/* Exec-time and get-time error codes */ - -#define PCRE_ERROR_NOMATCH (-1) -#define PCRE_ERROR_NULL (-2) -#define PCRE_ERROR_BADOPTION (-3) -#define PCRE_ERROR_BADMAGIC (-4) -#define PCRE_ERROR_UNKNOWN_NODE (-5) -#define PCRE_ERROR_NOMEMORY (-6) -#define PCRE_ERROR_NOSUBSTRING (-7) - -/* Request types for pcre_fullinfo() */ - -#define PCRE_INFO_OPTIONS 0 -#define PCRE_INFO_SIZE 1 -#define PCRE_INFO_CAPTURECOUNT 2 -#define PCRE_INFO_BACKREFMAX 3 -#define PCRE_INFO_FIRSTCHAR 4 -#define PCRE_INFO_FIRSTTABLE 5 -#define PCRE_INFO_LASTLITERAL 6 - -/* Types */ - -typedef void pcre; -typedef void pcre_extra; - -/* Store get and free functions. These can be set to alternative malloc/free -functions if required. Some magic is required for Win32 DLL; it is null on -other OS. */ - -PCRE_DL_IMPORT extern void *(*pcre_malloc)(size_t); -PCRE_DL_IMPORT extern void (*pcre_free)(void *); - -#undef PCRE_DL_IMPORT - -/* Functions */ - -extern pcre *pcre_compile(const char *, int, const char **, int *, - const unsigned char *); -extern int pcre_copy_substring(const char *, int *, int, int, char *, int); -extern int pcre_exec(const pcre *, const pcre_extra *, const char *, - int, int, int, int *, int); -extern void pcre_free_substring(const char *); -extern void pcre_free_substring_list(const char **); -extern int pcre_get_substring(const char *, int *, int, int, const char **); -extern int pcre_get_substring_list(const char *, int *, int, const char ***); -extern int pcre_info(const pcre *, int *, int *); -extern int pcre_fullinfo(const pcre *, const pcre_extra *, int, void *); -extern unsigned const char *pcre_maketables(void); -extern pcre_extra *pcre_study(const pcre *, int, const char **); -extern const char *pcre_version(void); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* End of pcre.h */ diff --git a/external/privoxy/pcre/pcregrep.c b/external/privoxy/pcre/pcregrep.c deleted file mode 100644 index e8c934e..0000000 --- a/external/privoxy/pcre/pcregrep.c +++ /dev/null @@ -1,228 +0,0 @@ -/************************************************* -* pcregrep program * -*************************************************/ - -/* This is a grep program that uses the PCRE regular expression library to do -its pattern matching. */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> -#include <errno.h> -#include "config.h" -#include "pcre.h" - -#define FALSE 0 -#define TRUE 1 - -typedef int BOOL; - - - -/************************************************* -* Global variables * -*************************************************/ - -static pcre *pattern; -static pcre_extra *hints; - -static BOOL count_only = FALSE; -static BOOL filenames_only = FALSE; -static BOOL invert = FALSE; -static BOOL number = FALSE; -static BOOL silent = FALSE; -static BOOL whole_lines = FALSE; - - - -#if ! HAVE_STRERROR -/************************************************* -* Provide strerror() for non-ANSI libraries * -*************************************************/ - -/* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror() -in their libraries, but can provide the same facility by this simple -alternative function. */ - -extern int sys_nerr; -extern char *sys_errlist[]; - -char * -strerror(int n) -{ -if (n < 0 || n >= sys_nerr) return "unknown error number"; -return sys_errlist[n]; -} -#endif /* HAVE_STRERROR */ - - - -/************************************************* -* Grep an individual file * -*************************************************/ - -static int -pcregrep(FILE *in, char *name) -{ -int rc = 1; -int linenumber = 0; -int count = 0; -int offsets[99]; -char buffer[BUFSIZ]; - -while (fgets(buffer, sizeof(buffer), in) != NULL) - { - BOOL match; - int length = (int)strlen(buffer); - if (length > 0 && buffer[length-1] == '\n') buffer[--length] = 0; - linenumber++; - - match = pcre_exec(pattern, hints, buffer, length, 0, 0, offsets, 99) >= 0; - if (match && whole_lines && offsets[1] != length) match = FALSE; - - if (match != invert) - { - if (count_only) count++; - - else if (filenames_only) - { - fprintf(stdout, "%s\n", (name == NULL)? "<stdin>" : name); - return 0; - } - - else if (silent) return 0; - - else - { - if (name != NULL) fprintf(stdout, "%s:", name); - if (number) fprintf(stdout, "%d:", linenumber); - fprintf(stdout, "%s\n", buffer); - } - - rc = 0; - } - } - -if (count_only) - { - if (name != NULL) fprintf(stdout, "%s:", name); - fprintf(stdout, "%d\n", count); - } - -return rc; -} - - - - -/************************************************* -* Usage function * -*************************************************/ - -static int -usage(int rc) -{ -fprintf(stderr, "Usage: pcregrep [-Vchilnsvx] pattern [file] ...\n"); -return rc; -} - - - - -/************************************************* -* Main program * -*************************************************/ - -int -main(int argc, char **argv) -{ -int i; -int rc = 1; -int options = 0; -int errptr; -const char *error; -BOOL filenames = TRUE; - -/* Process the options */ - -for (i = 1; i < argc; i++) - { - char *s; - if (argv[i][0] != '-') break; - s = argv[i] + 1; - while (*s != 0) - { - switch (*s++) - { - case 'c': count_only = TRUE; break; - case 'h': filenames = FALSE; break; - case 'i': options |= PCRE_CASELESS; break; - case 'l': filenames_only = TRUE; - case 'n': number = TRUE; break; - case 's': silent = TRUE; break; - case 'v': invert = TRUE; break; - case 'x': whole_lines = TRUE; options |= PCRE_ANCHORED; break; - - case 'V': - fprintf(stderr, "PCRE version %s\n", pcre_version()); - break; - - default: - fprintf(stderr, "pcregrep: unknown option %c\n", s[-1]); - return usage(2); - } - } - } - -/* There must be at least a regexp argument */ - -if (i >= argc) return usage(0); - -/* Compile the regular expression. */ - -pattern = pcre_compile(argv[i++], options, &error, &errptr, NULL); -if (pattern == NULL) - { - fprintf(stderr, "pcregrep: error in regex at offset %d: %s\n", errptr, error); - return 2; - } - -/* Study the regular expression, as we will be running it may times */ - -hints = pcre_study(pattern, 0, &error); -if (error != NULL) - { - fprintf(stderr, "pcregrep: error while studing regex: %s\n", error); - return 2; - } - -/* If there are no further arguments, do the business on stdin and exit */ - -if (i >= argc) return pcregrep(stdin, NULL); - -/* Otherwise, work through the remaining arguments as files. If there is only -one, don't give its name on the output. */ - -if (i == argc - 1) filenames = FALSE; -if (filenames_only) filenames = TRUE; - -for (; i < argc; i++) - { - FILE *in = fopen(argv[i], "r"); - if (in == NULL) - { - fprintf(stderr, "%s: failed to open: %s\n", argv[i], strerror(errno)); - rc = 2; - } - else - { - int frc = pcregrep(in, filenames? argv[i] : NULL); - if (frc == 0 && rc == 1) rc = 0; - fclose(in); - } - } - -return rc; -} - -/* End */ diff --git a/external/privoxy/pcre/pcreposix.c b/external/privoxy/pcre/pcreposix.c deleted file mode 100644 index 519d2dd..0000000 --- a/external/privoxy/pcre/pcreposix.c +++ /dev/null @@ -1,280 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -This module is a wrapper that provides a POSIX API to the underlying PCRE -functions. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - - Copyright (c) 1997-2000 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - -#include "internal.h" -#include "pcreposix.h" -#include "stdlib.h" - - - -/* Corresponding tables of PCRE error messages and POSIX error codes. */ - -static const char *estring[] = { - ERR1, ERR2, ERR3, ERR4, ERR5, ERR6, ERR7, ERR8, ERR9, ERR10, - ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19, ERR20, - ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR29, ERR29, ERR30, - ERR31 }; - -static int eint[] = { - REG_EESCAPE, /* "\\ at end of pattern" */ - REG_EESCAPE, /* "\\c at end of pattern" */ - REG_EESCAPE, /* "unrecognized character follows \\" */ - REG_BADBR, /* "numbers out of order in {} quantifier" */ - REG_BADBR, /* "number too big in {} quantifier" */ - REG_EBRACK, /* "missing terminating ] for character class" */ - REG_ECTYPE, /* "invalid escape sequence in character class" */ - REG_ERANGE, /* "range out of order in character class" */ - REG_BADRPT, /* "nothing to repeat" */ - REG_BADRPT, /* "operand of unlimited repeat could match the empty string" */ - REG_ASSERT, /* "internal error: unexpected repeat" */ - REG_BADPAT, /* "unrecognized character after (?" */ - REG_ESIZE, /* "too many capturing parenthesized sub-patterns" */ - REG_EPAREN, /* "missing )" */ - REG_ESUBREG, /* "back reference to non-existent subpattern" */ - REG_INVARG, /* "erroffset passed as NULL" */ - REG_INVARG, /* "unknown option bit(s) set" */ - REG_EPAREN, /* "missing ) after comment" */ - REG_ESIZE, /* "too many sets of parentheses" */ - REG_ESIZE, /* "regular expression too large" */ - REG_ESPACE, /* "failed to get memory" */ - REG_EPAREN, /* "unmatched brackets" */ - REG_ASSERT, /* "internal error: code overflow" */ - REG_BADPAT, /* "unrecognized character after (?<" */ - REG_BADPAT, /* "lookbehind assertion is not fixed length" */ - REG_BADPAT, /* "malformed number after (?(" */ - REG_BADPAT, /* "conditional group containe more than two branches" */ - REG_BADPAT, /* "assertion expected after (?(" */ - REG_BADPAT, /* "(?p must be followed by )" */ - REG_ECTYPE, /* "unknown POSIX class name" */ - REG_BADPAT, /* "POSIX collating elements are not supported" */ - REG_INVARG, /* "this version of PCRE is not compiled with PCRE_UTF8 support" */ - REG_BADPAT, /* "characters with values > 255 are not yet supported in classes" */ - REG_BADPAT, /* "character value in \x{...} sequence is too large" */ - REG_BADPAT /* "invalid condition (?(0)" */ -}; - -/* Table of texts corresponding to POSIX error codes */ - -static const char *pstring[] = { - "", /* Dummy for value 0 */ - "internal error", /* REG_ASSERT */ - "invalid repeat counts in {}", /* BADBR */ - "pattern error", /* BADPAT */ - "? * + invalid", /* BADRPT */ - "unbalanced {}", /* EBRACE */ - "unbalanced []", /* EBRACK */ - "collation error - not relevant", /* ECOLLATE */ - "bad class", /* ECTYPE */ - "bad escape sequence", /* EESCAPE */ - "empty expression", /* EMPTY */ - "unbalanced ()", /* EPAREN */ - "bad range inside []", /* ERANGE */ - "expression too big", /* ESIZE */ - "failed to get memory", /* ESPACE */ - "bad back reference", /* ESUBREG */ - "bad argument", /* INVARG */ - "match failed" /* NOMATCH */ -}; - - - - -/************************************************* -* Translate PCRE text code to int * -*************************************************/ - -/* PCRE compile-time errors are given as strings defined as macros. We can just -look them up in a table to turn them into POSIX-style error codes. */ - -static int -pcre_posix_error_code(const char *s) -{ -size_t i; -for (i = 0; i < sizeof(estring)/sizeof(char *); i++) - if (strcmp(s, estring[i]) == 0) return eint[i]; -return REG_ASSERT; -} - - - -/************************************************* -* Translate error code to string * -*************************************************/ - -size_t -regerror(int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size) -{ -const char *message, *addmessage; -size_t length, addlength; - -message = (errcode >= (int)(sizeof(pstring)/sizeof(char *)))? - "unknown error code" : pstring[errcode]; -length = strlen(message) + 1; - -addmessage = " at offset "; -addlength = (preg != NULL && (int)preg->re_erroffset != -1)? - strlen(addmessage) + 6 : 0; - -if (errbuf_size > 0) - { - if (addlength > 0 && errbuf_size >= length + addlength) - sprintf(errbuf, "%s%s%-6d", message, addmessage, (int)preg->re_erroffset); - else - { - strncpy(errbuf, message, errbuf_size - 1); - errbuf[errbuf_size-1] = 0; - } - } - -return length + addlength; -} - - - - -/************************************************* -* Free store held by a regex * -*************************************************/ - -void -regfree(regex_t *preg) -{ -(pcre_free)(preg->re_pcre); -} - - - - -/************************************************* -* Compile a regular expression * -*************************************************/ - -/* -Arguments: - preg points to a structure for recording the compiled expression - pattern the pattern to compile - cflags compilation flags - -Returns: 0 on success - various non-zero codes on failure -*/ - -int -regcomp(regex_t *preg, const char *pattern, int cflags) -{ -const char *errorptr; -int erroffset; -int options = 0; - -if ((cflags & REG_ICASE) != 0) options |= PCRE_CASELESS; -if ((cflags & REG_NEWLINE) != 0) options |= PCRE_MULTILINE; - -preg->re_pcre = pcre_compile(pattern, options, &errorptr, &erroffset, NULL); -preg->re_erroffset = erroffset; - -if (preg->re_pcre == NULL) return pcre_posix_error_code(errorptr); - -preg->re_nsub = pcre_info(preg->re_pcre, NULL, NULL); -return 0; -} - - - - -/************************************************* -* Match a regular expression * -*************************************************/ - -/* Unfortunately, PCRE requires 3 ints of working space for each captured -substring, so we have to get and release working store instead of just using -the POSIX structures as was done in earlier releases when PCRE needed only 2 -ints. */ - -int -regexec(regex_t *preg, const char *string, size_t nmatch, - regmatch_t pmatch[], int eflags) -{ -int rc; -int options = 0; -int *ovector = NULL; - -if ((eflags & REG_NOTBOL) != 0) options |= PCRE_NOTBOL; -if ((eflags & REG_NOTEOL) != 0) options |= PCRE_NOTEOL; - -preg->re_erroffset = (size_t)(-1); /* Only has meaning after compile */ - -if (nmatch > 0) - { - ovector = (int *)malloc(sizeof(int) * nmatch * 3); - if (ovector == NULL) return REG_ESPACE; - } - -rc = pcre_exec(preg->re_pcre, NULL, string, (int)strlen(string), 0, options, - ovector, nmatch * 3); - -if (rc == 0) rc = nmatch; /* All captured slots were filled in */ - -if (rc >= 0) - { - size_t i; - for (i = 0; i < (size_t)rc; i++) - { - pmatch[i].rm_so = ovector[i*2]; - pmatch[i].rm_eo = ovector[i*2+1]; - } - if (ovector != NULL) free(ovector); - for (; i < nmatch; i++) pmatch[i].rm_so = pmatch[i].rm_eo = -1; - return 0; - } - -else - { - if (ovector != NULL) free(ovector); - switch(rc) - { - case PCRE_ERROR_NOMATCH: return REG_NOMATCH; - case PCRE_ERROR_NULL: return REG_INVARG; - case PCRE_ERROR_BADOPTION: return REG_INVARG; - case PCRE_ERROR_BADMAGIC: return REG_INVARG; - case PCRE_ERROR_UNKNOWN_NODE: return REG_ASSERT; - case PCRE_ERROR_NOMEMORY: return REG_ESPACE; - default: return REG_ASSERT; - } - } -} - -/* End of pcreposix.c */ diff --git a/external/privoxy/pcre/pcreposix.h b/external/privoxy/pcre/pcreposix.h deleted file mode 100644 index 7660acb..0000000 --- a/external/privoxy/pcre/pcreposix.h +++ /dev/null @@ -1,88 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* Copyright (c) 1997-2000 University of Cambridge */ - -#ifndef _PCREPOSIX_H -#define _PCREPOSIX_H - -/* This is the header for the POSIX wrapper interface to the PCRE Perl- -Compatible Regular Expression library. It defines the things POSIX says should -be there. I hope. */ - -/* Have to include stdlib.h in order to ensure that size_t is defined. */ - -#include <stdlib.h> - -/* Allow for C++ users */ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Options defined by POSIX. */ - -#define REG_ICASE 0x01 -#define REG_NEWLINE 0x02 -#define REG_NOTBOL 0x04 -#define REG_NOTEOL 0x08 - -/* These are not used by PCRE, but by defining them we make it easier -to slot PCRE into existing programs that make POSIX calls. */ - -#define REG_EXTENDED 0 -#define REG_NOSUB 0 - -/* Error values. Not all these are relevant or used by the wrapper. */ - -enum { - REG_ASSERT = 1, /* internal error ? */ - REG_BADBR, /* invalid repeat counts in {} */ - REG_BADPAT, /* pattern error */ - REG_BADRPT, /* ? * + invalid */ - REG_EBRACE, /* unbalanced {} */ - REG_EBRACK, /* unbalanced [] */ - REG_ECOLLATE, /* collation error - not relevant */ - REG_ECTYPE, /* bad class */ - REG_EESCAPE, /* bad escape sequence */ - REG_EMPTY, /* empty expression */ - REG_EPAREN, /* unbalanced () */ - REG_ERANGE, /* bad range inside [] */ - REG_ESIZE, /* expression too big */ - REG_ESPACE, /* failed to get memory */ - REG_ESUBREG, /* bad back reference */ - REG_INVARG, /* bad argument */ - REG_NOMATCH /* match failed */ -}; - - -/* The structure representing a compiled regular expression. */ - -typedef struct { - void *re_pcre; - size_t re_nsub; - size_t re_erroffset; -} regex_t; - -/* The structure in which a captured offset is returned. */ - -typedef int regoff_t; - -typedef struct { - regoff_t rm_so; - regoff_t rm_eo; -} regmatch_t; - -/* The functions */ - -extern int regcomp(regex_t *, const char *, int); -extern int regexec(regex_t *, const char *, size_t, regmatch_t *, int); -extern size_t regerror(int, const regex_t *, char *, size_t); -extern void regfree(regex_t *); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* End of pcreposix.h */ diff --git a/external/privoxy/pcre/pcretest.c b/external/privoxy/pcre/pcretest.c deleted file mode 100644 index ee5df5f..0000000 --- a/external/privoxy/pcre/pcretest.c +++ /dev/null @@ -1,1225 +0,0 @@ -/************************************************* -* PCRE testing program * -*************************************************/ - -#include <ctype.h> -#include <stdio.h> -#include <string.h> -#include <stdlib.h> -#include <time.h> -#include <locale.h> - -/* Use the internal info for displaying the results of pcre_study(). */ - -#include "internal.h" - -/* It is possible to compile this test program without including support for -testing the POSIX interface, though this is not available via the standard -Makefile. */ - -#if !defined NOPOSIX -#include "pcreposix.h" -#endif - -#ifndef CLOCKS_PER_SEC -#ifdef CLK_TCK -#define CLOCKS_PER_SEC CLK_TCK -#else -#define CLOCKS_PER_SEC 100 -#endif -#endif - -#define LOOPREPEAT 20000 - - -static FILE *outfile; -static int log_store = 0; -static size_t gotten_store; - - - -static int utf8_table1[] = { - 0x0000007f, 0x000007ff, 0x0000ffff, 0x001fffff, 0x03ffffff, 0x7fffffff}; - -static int utf8_table2[] = { - 0, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc}; - -static int utf8_table3[] = { - 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01}; - - -/************************************************* -* Convert character value to UTF-8 * -*************************************************/ - -/* This function takes an integer value in the range 0 - 0x7fffffff -and encodes it as a UTF-8 character in 0 to 6 bytes. - -Arguments: - cvalue the character value - buffer pointer to buffer for result - at least 6 bytes long - -Returns: number of characters placed in the buffer - -1 if input character is negative - 0 if input character is positive but too big (only when - int is longer than 32 bits) -*/ - -static int -ord2utf8(int cvalue, unsigned char *buffer) -{ -register int i, j; -for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++) - if (cvalue <= utf8_table1[i]) break; -if (i >= sizeof(utf8_table1)/sizeof(int)) return 0; -if (cvalue < 0) return -1; -*buffer++ = utf8_table2[i] | (cvalue & utf8_table3[i]); -cvalue >>= 6 - i; -for (j = 0; j < i; j++) - { - *buffer++ = 0x80 | (cvalue & 0x3f); - cvalue >>= 6; - } -return i + 1; -} - - -/************************************************* -* Convert UTF-8 string to value * -*************************************************/ - -/* This function takes one or more bytes that represents a UTF-8 character, -and returns the value of the character. - -Argument: - buffer a pointer to the byte vector - vptr a pointer to an int to receive the value - -Returns: > 0 => the number of bytes consumed - -6 to 0 => malformed UTF-8 character at offset = (-return) -*/ - -int -utf82ord(unsigned char *buffer, int *vptr) -{ -int c = *buffer++; -int d = c; -int i, j, s; - -for (i = -1; i < 6; i++) /* i is number of additional bytes */ - { - if ((d & 0x80) == 0) break; - d <<= 1; - } - -if (i == -1) { *vptr = c; return 1; } /* ascii character */ -if (i == 0 || i == 6) return 0; /* invalid UTF-8 */ - -/* i now has a value in the range 1-5 */ - -d = c & utf8_table3[i]; -s = 6 - i; - -for (j = 0; j < i; j++) - { - c = *buffer++; - if ((c & 0xc0) != 0x80) return -(j+1); - d |= (c & 0x3f) << s; - s += 6; - } - -/* Check that encoding was the correct unique one */ - -for (j = 0; j < sizeof(utf8_table1)/sizeof(int); j++) - if (d <= utf8_table1[j]) break; -if (j != i) return -(i+1); - -/* Valid value */ - -*vptr = d; -return i+1; -} - - - - - - -/* Debugging function to print the internal form of the regex. This is the same -code as contained in pcre.c under the DEBUG macro. */ - -static const char *OP_names[] = { - "End", "\\A", "\\B", "\\b", "\\D", "\\d", - "\\S", "\\s", "\\W", "\\w", "\\Z", "\\z", - "Opt", "^", "$", "Any", "chars", "not", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", - "class", "Ref", "Recurse", - "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not", - "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cref", - "Brazero", "Braminzero", "Bra" -}; - - -static void print_internals(pcre *re) -{ -unsigned char *code = ((real_pcre *)re)->code; - -fprintf(outfile, "------------------------------------------------------------------\n"); - -for(;;) - { - int c; - int charlength; - - fprintf(outfile, "%3d ", (int)(code - ((real_pcre *)re)->code)); - - if (*code >= OP_BRA) - { - fprintf(outfile, "%3d Bra %d", (code[1] << 8) + code[2], *code - OP_BRA); - code += 2; - } - - else switch(*code) - { - case OP_END: - fprintf(outfile, " %s\n", OP_names[*code]); - fprintf(outfile, "------------------------------------------------------------------\n"); - return; - - case OP_OPT: - fprintf(outfile, " %.2x %s", code[1], OP_names[*code]); - code++; - break; - - case OP_COND: - fprintf(outfile, "%3d Cond", (code[1] << 8) + code[2]); - code += 2; - break; - - case OP_CREF: - fprintf(outfile, " %.2d %s", code[1], OP_names[*code]); - code++; - break; - - case OP_CHARS: - charlength = *(++code); - fprintf(outfile, "%3d ", charlength); - while (charlength-- > 0) - if (isprint(c = *(++code))) fprintf(outfile, "%c", c); - else fprintf(outfile, "\\x%02x", c); - break; - - case OP_KETRMAX: - case OP_KETRMIN: - case OP_ALT: - case OP_KET: - case OP_ASSERT: - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - case OP_ONCE: - fprintf(outfile, "%3d %s", (code[1] << 8) + code[2], OP_names[*code]); - code += 2; - break; - - case OP_REVERSE: - fprintf(outfile, "%3d %s", (code[1] << 8) + code[2], OP_names[*code]); - code += 2; - break; - - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - if (*code >= OP_TYPESTAR) - fprintf(outfile, " %s", OP_names[code[1]]); - else if (isprint(c = code[1])) fprintf(outfile, " %c", c); - else fprintf(outfile, " \\x%02x", c); - fprintf(outfile, "%s", OP_names[*code++]); - break; - - case OP_EXACT: - case OP_UPTO: - case OP_MINUPTO: - if (isprint(c = code[3])) fprintf(outfile, " %c{", c); - else fprintf(outfile, " \\x%02x{", c); - if (*code != OP_EXACT) fprintf(outfile, ","); - fprintf(outfile, "%d}", (code[1] << 8) + code[2]); - if (*code == OP_MINUPTO) fprintf(outfile, "?"); - code += 3; - break; - - case OP_TYPEEXACT: - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - fprintf(outfile, " %s{", OP_names[code[3]]); - if (*code != OP_TYPEEXACT) fprintf(outfile, "0,"); - fprintf(outfile, "%d}", (code[1] << 8) + code[2]); - if (*code == OP_TYPEMINUPTO) fprintf(outfile, "?"); - code += 3; - break; - - case OP_NOT: - if (isprint(c = *(++code))) fprintf(outfile, " [^%c]", c); - else fprintf(outfile, " [^\\x%02x]", c); - break; - - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - if (isprint(c = code[1])) fprintf(outfile, " [^%c]", c); - else fprintf(outfile, " [^\\x%02x]", c); - fprintf(outfile, "%s", OP_names[*code++]); - break; - - case OP_NOTEXACT: - case OP_NOTUPTO: - case OP_NOTMINUPTO: - if (isprint(c = code[3])) fprintf(outfile, " [^%c]{", c); - else fprintf(outfile, " [^\\x%02x]{", c); - if (*code != OP_NOTEXACT) fprintf(outfile, ","); - fprintf(outfile, "%d}", (code[1] << 8) + code[2]); - if (*code == OP_NOTMINUPTO) fprintf(outfile, "?"); - code += 3; - break; - - case OP_REF: - fprintf(outfile, " \\%d", *(++code)); - code++; - goto CLASS_REF_REPEAT; - - case OP_CLASS: - { - int i, min, max; - code++; - fprintf(outfile, " ["); - - for (i = 0; i < 256; i++) - { - if ((code[i/8] & (1 << (i&7))) != 0) - { - int j; - for (j = i+1; j < 256; j++) - if ((code[j/8] & (1 << (j&7))) == 0) break; - if (i == '-' || i == ']') fprintf(outfile, "\\"); - if (isprint(i)) fprintf(outfile, "%c", i); else fprintf(outfile, "\\x%02x", i); - if (--j > i) - { - fprintf(outfile, "-"); - if (j == '-' || j == ']') fprintf(outfile, "\\"); - if (isprint(j)) fprintf(outfile, "%c", j); else fprintf(outfile, "\\x%02x", j); - } - i = j; - } - } - fprintf(outfile, "]"); - code += 32; - - CLASS_REF_REPEAT: - - switch(*code) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - fprintf(outfile, "%s", OP_names[*code]); - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - min = (code[1] << 8) + code[2]; - max = (code[3] << 8) + code[4]; - if (max == 0) fprintf(outfile, "{%d,}", min); - else fprintf(outfile, "{%d,%d}", min, max); - if (*code == OP_CRMINRANGE) fprintf(outfile, "?"); - code += 4; - break; - - default: - code--; - } - } - break; - - /* Anything else is just a one-node item */ - - default: - fprintf(outfile, " %s", OP_names[*code]); - break; - } - - code++; - fprintf(outfile, "\n"); - } -} - - - -/* Character string printing function. A "normal" and a UTF-8 version. */ - -static void pchars(unsigned char *p, int length, int utf8) -{ -int c; -while (length-- > 0) - { - if (utf8) - { - int rc = utf82ord(p, &c); - if (rc > 0) - { - length -= rc - 1; - p += rc; - if (c < 256 && isprint(c)) fprintf(outfile, "%c", c); - else fprintf(outfile, "\\x{%02x}", c); - continue; - } - } - - /* Not UTF-8, or malformed UTF-8 */ - - if (isprint(c = *(p++))) fprintf(outfile, "%c", c); - else fprintf(outfile, "\\x%02x", c); - } -} - - - -/* Alternative malloc function, to test functionality and show the size of the -compiled re. */ - -static void *new_malloc(size_t size) -{ -gotten_store = size; -if (log_store) - fprintf(outfile, "Memory allocation (code space): %d\n", - (int)((int)size - offsetof(real_pcre, code[0]))); -return malloc(size); -} - - - - -/* Get one piece of information from the pcre_fullinfo() function */ - -static void new_info(pcre *re, pcre_extra *study, int option, void *ptr) -{ -int rc; -if ((rc = pcre_fullinfo(re, study, option, ptr)) < 0) - fprintf(outfile, "Error %d from pcre_fullinfo(%d)\n", rc, option); -} - - - - -/* Read lines from named file or stdin and write to named file or stdout; lines -consist of a regular expression, in delimiters and optionally followed by -options, followed by a set of test data, terminated by an empty line. */ - -int main(int argc, char **argv) -{ -FILE *infile = stdin; -int options = 0; -int study_options = 0; -int op = 1; -int timeit = 0; -int showinfo = 0; -int showstore = 0; -int posix = 0; -int debug = 0; -int done = 0; -unsigned char buffer[30000]; -unsigned char dbuffer[1024]; - -/* Static so that new_malloc can use it. */ - -outfile = stdout; - -/* Scan options */ - -while (argc > 1 && argv[op][0] == '-') - { - if (strcmp(argv[op], "-s") == 0 || strcmp(argv[op], "-m") == 0) - showstore = 1; - else if (strcmp(argv[op], "-t") == 0) timeit = 1; - else if (strcmp(argv[op], "-i") == 0) showinfo = 1; - else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1; - else if (strcmp(argv[op], "-p") == 0) posix = 1; - else - { - printf("*** Unknown option %s\n", argv[op]); - printf("Usage: pcretest [-d] [-i] [-p] [-s] [-t] [<input> [<output>]]\n"); - printf(" -d debug: show compiled code; implies -i\n" - " -i show information about compiled pattern\n" - " -p use POSIX interface\n" - " -s output store information\n" - " -t time compilation and execution\n"); - return 1; - } - op++; - argc--; - } - -/* Sort out the input and output files */ - -if (argc > 1) - { - infile = fopen(argv[op], "r"); - if (infile == NULL) - { - printf("** Failed to open %s\n", argv[op]); - return 1; - } - } - -if (argc > 2) - { - outfile = fopen(argv[op+1], "w"); - if (outfile == NULL) - { - printf("** Failed to open %s\n", argv[op+1]); - return 1; - } - } - -/* Set alternative malloc function */ - -pcre_malloc = new_malloc; - -/* Heading line, then prompt for first regex if stdin */ - -fprintf(outfile, "PCRE version %s\n\n", pcre_version()); - -/* Main loop */ - -while (!done) - { - pcre *re = NULL; - pcre_extra *extra = NULL; - -#if !defined NOPOSIX /* There are still compilers that require no indent */ - regex_t preg; - int do_posix = 0; -#endif - - const char *error; - unsigned char *p, *pp, *ppp; - unsigned const char *tables = NULL; - int do_study = 0; - int do_debug = debug; - int do_G = 0; - int do_g = 0; - int do_showinfo = showinfo; - int do_showrest = 0; - int utf8 = 0; - int erroroffset, len, delimiter; - - if (infile == stdin) printf(" re> "); - if (fgets((char *)buffer, sizeof(buffer), infile) == NULL) break; - if (infile != stdin) fprintf(outfile, "%s", (char *)buffer); - - p = buffer; - while (isspace(*p)) p++; - if (*p == 0) continue; - - /* Get the delimiter and seek the end of the pattern; if is isn't - complete, read more. */ - - delimiter = *p++; - - if (isalnum(delimiter) || delimiter == '\\') - { - fprintf(outfile, "** Delimiter must not be alphameric or \\\n"); - goto SKIP_DATA; - } - - pp = p; - - for(;;) - { - while (*pp != 0) - { - if (*pp == '\\' && pp[1] != 0) pp++; - else if (*pp == delimiter) break; - pp++; - } - if (*pp != 0) break; - - len = sizeof(buffer) - (pp - buffer); - if (len < 256) - { - fprintf(outfile, "** Expression too long - missing delimiter?\n"); - goto SKIP_DATA; - } - - if (infile == stdin) printf(" > "); - if (fgets((char *)pp, len, infile) == NULL) - { - fprintf(outfile, "** Unexpected EOF\n"); - done = 1; - goto CONTINUE; - } - if (infile != stdin) fprintf(outfile, "%s", (char *)pp); - } - - /* If the first character after the delimiter is backslash, make - the pattern end with backslash. This is purely to provide a way - of testing for the error message when a pattern ends with backslash. */ - - if (pp[1] == '\\') *pp++ = '\\'; - - /* Terminate the pattern at the delimiter */ - - *pp++ = 0; - - /* Look for options after final delimiter */ - - options = 0; - study_options = 0; - log_store = showstore; /* default from command line */ - - while (*pp != 0) - { - switch (*pp++) - { - case 'g': do_g = 1; break; - case 'i': options |= PCRE_CASELESS; break; - case 'm': options |= PCRE_MULTILINE; break; - case 's': options |= PCRE_DOTALL; break; - case 'x': options |= PCRE_EXTENDED; break; - - case '+': do_showrest = 1; break; - case 'A': options |= PCRE_ANCHORED; break; - case 'D': do_debug = do_showinfo = 1; break; - case 'E': options |= PCRE_DOLLAR_ENDONLY; break; - case 'G': do_G = 1; break; - case 'I': do_showinfo = 1; break; - case 'M': log_store = 1; break; - -#if !defined NOPOSIX - case 'P': do_posix = 1; break; -#endif - - case 'S': do_study = 1; break; - case 'U': options |= PCRE_UNGREEDY; break; - case 'X': options |= PCRE_EXTRA; break; - case '8': options |= PCRE_UTF8; utf8 = 1; break; - - case 'L': - ppp = pp; - while (*ppp != '\n' && *ppp != ' ') ppp++; - *ppp = 0; - if (setlocale(LC_CTYPE, (const char *)pp) == NULL) - { - fprintf(outfile, "** Failed to set locale \"%s\"\n", pp); - goto SKIP_DATA; - } - tables = pcre_maketables(); - pp = ppp; - break; - - case '\n': case ' ': break; - default: - fprintf(outfile, "** Unknown option '%c'\n", pp[-1]); - goto SKIP_DATA; - } - } - - /* Handle compiling via the POSIX interface, which doesn't support the - timing, showing, or debugging options, nor the ability to pass over - local character tables. */ - -#if !defined NOPOSIX - if (posix || do_posix) - { - int rc; - int cflags = 0; - if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE; - if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE; - rc = regcomp(&preg, (char *)p, cflags); - - /* Compilation failed; go back for another re, skipping to blank line - if non-interactive. */ - - if (rc != 0) - { - (void)regerror(rc, &preg, (char *)buffer, sizeof(buffer)); - fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer); - goto SKIP_DATA; - } - } - - /* Handle compiling via the native interface */ - - else -#endif /* !defined NOPOSIX */ - - { - if (timeit) - { - register int i; - clock_t time_taken; - clock_t start_time = clock(); - for (i = 0; i < LOOPREPEAT; i++) - { - re = pcre_compile((char *)p, options, &error, &erroroffset, tables); - if (re != NULL) free(re); - } - time_taken = clock() - start_time; - fprintf(outfile, "Compile time %.3f milliseconds\n", - ((double)time_taken * 1000.0) / - ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC)); - } - - re = pcre_compile((char *)p, options, &error, &erroroffset, tables); - - /* Compilation failed; go back for another re, skipping to blank line - if non-interactive. */ - - if (re == NULL) - { - fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset); - SKIP_DATA: - if (infile != stdin) - { - for (;;) - { - if (fgets((char *)buffer, sizeof(buffer), infile) == NULL) - { - done = 1; - goto CONTINUE; - } - len = (int)strlen((char *)buffer); - while (len > 0 && isspace(buffer[len-1])) len--; - if (len == 0) break; - } - fprintf(outfile, "\n"); - } - goto CONTINUE; - } - - /* Compilation succeeded; print data if required. There are now two - info-returning functions. The old one has a limited interface and - returns only limited data. Check that it agrees with the newer one. */ - - if (do_showinfo) - { - int old_first_char, old_options, old_count; - int count, backrefmax, first_char, need_char; - size_t size; - - if (do_debug) print_internals(re); - - new_info(re, NULL, PCRE_INFO_OPTIONS, &options); - new_info(re, NULL, PCRE_INFO_SIZE, &size); - new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count); - new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax); - new_info(re, NULL, PCRE_INFO_FIRSTCHAR, &first_char); - new_info(re, NULL, PCRE_INFO_LASTLITERAL, &need_char); - - old_count = pcre_info(re, &old_options, &old_first_char); - if (count < 0) fprintf(outfile, - "Error %d from pcre_info()\n", count); - else - { - if (old_count != count) fprintf(outfile, - "Count disagreement: pcre_fullinfo=%d pcre_info=%d\n", count, - old_count); - - if (old_first_char != first_char) fprintf(outfile, - "First char disagreement: pcre_fullinfo=%d pcre_info=%d\n", - first_char, old_first_char); - - if (old_options != options) fprintf(outfile, - "Options disagreement: pcre_fullinfo=%d pcre_info=%d\n", options, - old_options); - } - - if (size != gotten_store) fprintf(outfile, - "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n", - size, gotten_store); - - fprintf(outfile, "Capturing subpattern count = %d\n", count); - if (backrefmax > 0) - fprintf(outfile, "Max back reference = %d\n", backrefmax); - if (options == 0) fprintf(outfile, "No options\n"); - else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s\n", - ((options & PCRE_ANCHORED) != 0)? " anchored" : "", - ((options & PCRE_CASELESS) != 0)? " caseless" : "", - ((options & PCRE_EXTENDED) != 0)? " extended" : "", - ((options & PCRE_MULTILINE) != 0)? " multiline" : "", - ((options & PCRE_DOTALL) != 0)? " dotall" : "", - ((options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "", - ((options & PCRE_EXTRA) != 0)? " extra" : "", - ((options & PCRE_UNGREEDY) != 0)? " ungreedy" : "", - ((options & PCRE_UTF8) != 0)? " utf8" : ""); - - if (((((real_pcre *)re)->options) & PCRE_ICHANGED) != 0) - fprintf(outfile, "Case state changes\n"); - - if (first_char == -1) - { - fprintf(outfile, "First char at start or follows \\n\n"); - } - else if (first_char < 0) - { - fprintf(outfile, "No first char\n"); - } - else - { - if (isprint(first_char)) - fprintf(outfile, "First char = \'%c\'\n", first_char); - else - fprintf(outfile, "First char = %d\n", first_char); - } - - if (need_char < 0) - { - fprintf(outfile, "No need char\n"); - } - else - { - if (isprint(need_char)) - fprintf(outfile, "Need char = \'%c\'\n", need_char); - else - fprintf(outfile, "Need char = %d\n", need_char); - } - } - - /* If /S was present, study the regexp to generate additional info to - help with the matching. */ - - if (do_study) - { - if (timeit) - { - register int i; - clock_t time_taken; - clock_t start_time = clock(); - for (i = 0; i < LOOPREPEAT; i++) - extra = pcre_study(re, study_options, &error); - time_taken = clock() - start_time; - if (extra != NULL) free(extra); - fprintf(outfile, " Study time %.3f milliseconds\n", - ((double)time_taken * 1000.0)/ - ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC)); - } - - extra = pcre_study(re, study_options, &error); - if (error != NULL) - fprintf(outfile, "Failed to study: %s\n", error); - else if (extra == NULL) - fprintf(outfile, "Study returned NULL\n"); - - else if (do_showinfo) - { - uschar *start_bits = NULL; - new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits); - if (start_bits == NULL) - fprintf(outfile, "No starting character set\n"); - else - { - int i; - int c = 24; - fprintf(outfile, "Starting character set: "); - for (i = 0; i < 256; i++) - { - if ((start_bits[i/8] & (1<<(i%8))) != 0) - { - if (c > 75) - { - fprintf(outfile, "\n "); - c = 2; - } - if (isprint(i) && i != ' ') - { - fprintf(outfile, "%c ", i); - c += 2; - } - else - { - fprintf(outfile, "\\x%02x ", i); - c += 5; - } - } - } - fprintf(outfile, "\n"); - } - } - } - } - - /* Read data lines and test them */ - - for (;;) - { - unsigned char *q; - unsigned char *bptr = dbuffer; - int count, c; - int copystrings = 0; - int getstrings = 0; - int getlist = 0; - int gmatched = 0; - int start_offset = 0; - int g_notempty = 0; - int offsets[45]; - int size_offsets = sizeof(offsets)/sizeof(int); - - options = 0; - - if (infile == stdin) printf("data> "); - if (fgets((char *)buffer, sizeof(buffer), infile) == NULL) - { - done = 1; - goto CONTINUE; - } - if (infile != stdin) fprintf(outfile, "%s", (char *)buffer); - - len = (int)strlen((char *)buffer); - while (len > 0 && isspace(buffer[len-1])) len--; - buffer[len] = 0; - if (len == 0) break; - - p = buffer; - while (isspace(*p)) p++; - - q = dbuffer; - while ((c = *p++) != 0) - { - int i = 0; - int n = 0; - if (c == '\\') switch ((c = *p++)) - { - case 'a': c = 7; break; - case 'b': c = '\b'; break; - case 'e': c = 27; break; - case 'f': c = '\f'; break; - case 'n': c = '\n'; break; - case 'r': c = '\r'; break; - case 't': c = '\t'; break; - case 'v': c = '\v'; break; - - case '0': case '1': case '2': case '3': - case '4': case '5': case '6': case '7': - c -= '0'; - while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9') - c = c * 8 + *p++ - '0'; - break; - - case 'x': - - /* Handle \x{..} specially - new Perl thing for utf8 */ - - if (*p == '{') - { - unsigned char *pt = p; - c = 0; - while (isxdigit(*(++pt))) - c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'W'); - if (*pt == '}') - { - unsigned char buffer[8]; - int ii, utn; - utn = ord2utf8(c, buffer); - for (ii = 0; ii < utn - 1; ii++) *q++ = buffer[ii]; - c = buffer[ii]; /* Last byte */ - p = pt + 1; - break; - } - /* Not correct form; fall through */ - } - - /* Ordinary \x */ - - c = 0; - while (i++ < 2 && isxdigit(*p)) - { - c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'W'); - p++; - } - break; - - case 0: /* Allows for an empty line */ - p--; - continue; - - case 'A': /* Option setting */ - options |= PCRE_ANCHORED; - continue; - - case 'B': - options |= PCRE_NOTBOL; - continue; - - case 'C': - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - copystrings |= 1 << n; - continue; - - case 'G': - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - getstrings |= 1 << n; - continue; - - case 'L': - getlist = 1; - continue; - - case 'N': - options |= PCRE_NOTEMPTY; - continue; - - case 'O': - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - if (n <= (int)(sizeof(offsets)/sizeof(int))) size_offsets = n; - continue; - - case 'Z': - options |= PCRE_NOTEOL; - continue; - } - *q++ = c; - } - *q = 0; - len = q - dbuffer; - - /* Handle matching via the POSIX interface, which does not - support timing. */ - -#if !defined NOPOSIX - if (posix || do_posix) - { - int rc; - int eflags = 0; - regmatch_t pmatch[sizeof(offsets)/sizeof(int)]; - if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL; - if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL; - - rc = regexec(&preg, (const char *)bptr, size_offsets, pmatch, eflags); - - if (rc != 0) - { - (void)regerror(rc, &preg, (char *)buffer, sizeof(buffer)); - fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer); - } - else - { - size_t i; - for (i = 0; i < size_offsets; i++) - { - if (pmatch[i].rm_so >= 0) - { - fprintf(outfile, "%2d: ", (int)i); - pchars(dbuffer + pmatch[i].rm_so, - pmatch[i].rm_eo - pmatch[i].rm_so, utf8); - fprintf(outfile, "\n"); - if (i == 0 && do_showrest) - { - fprintf(outfile, " 0+ "); - pchars(dbuffer + pmatch[i].rm_eo, len - pmatch[i].rm_eo, utf8); - fprintf(outfile, "\n"); - } - } - } - } - } - - /* Handle matching via the native interface - repeats for /g and /G */ - - else -#endif /* !defined NOPOSIX */ - - for (;; gmatched++) /* Loop for /g or /G */ - { - if (timeit) - { - register int i; - clock_t time_taken; - clock_t start_time = clock(); - for (i = 0; i < LOOPREPEAT; i++) - count = pcre_exec(re, extra, (char *)bptr, len, - start_offset, options | g_notempty, offsets, size_offsets); - time_taken = clock() - start_time; - fprintf(outfile, "Execute time %.3f milliseconds\n", - ((double)time_taken * 1000.0)/ - ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC)); - } - - count = pcre_exec(re, extra, (char *)bptr, len, - start_offset, options | g_notempty, offsets, size_offsets); - - if (count == 0) - { - fprintf(outfile, "Matched, but too many substrings\n"); - count = size_offsets/3; - } - - /* Matched */ - - if (count >= 0) - { - int i; - for (i = 0; i < count * 2; i += 2) - { - if (offsets[i] < 0) - fprintf(outfile, "%2d: <unset>\n", i/2); - else - { - fprintf(outfile, "%2d: ", i/2); - pchars(bptr + offsets[i], offsets[i+1] - offsets[i], utf8); - fprintf(outfile, "\n"); - if (i == 0) - { - if (do_showrest) - { - fprintf(outfile, " 0+ "); - pchars(bptr + offsets[i+1], len - offsets[i+1], utf8); - fprintf(outfile, "\n"); - } - } - } - } - - for (i = 0; i < 32; i++) - { - if ((copystrings & (1 << i)) != 0) - { - char copybuffer[16]; - int rc = pcre_copy_substring((char *)bptr, offsets, count, - i, copybuffer, sizeof(copybuffer)); - if (rc < 0) - fprintf(outfile, "copy substring %d failed %d\n", i, rc); - else - fprintf(outfile, "%2dC %s (%d)\n", i, copybuffer, rc); - } - } - - for (i = 0; i < 32; i++) - { - if ((getstrings & (1 << i)) != 0) - { - const char *substring; - int rc = pcre_get_substring((char *)bptr, offsets, count, - i, &substring); - if (rc < 0) - fprintf(outfile, "get substring %d failed %d\n", i, rc); - else - { - fprintf(outfile, "%2dG %s (%d)\n", i, substring, rc); - /* free((void *)substring); */ - pcre_free_substring(substring); - } - } - } - - if (getlist) - { - const char **stringlist; - int rc = pcre_get_substring_list((char *)bptr, offsets, count, - &stringlist); - if (rc < 0) - fprintf(outfile, "get substring list failed %d\n", rc); - else - { - for (i = 0; i < count; i++) - fprintf(outfile, "%2dL %s\n", i, stringlist[i]); - if (stringlist[i] != NULL) - fprintf(outfile, "string list not terminated by NULL\n"); - /* free((void *)stringlist); */ - pcre_free_substring_list(stringlist); - } - } - } - - /* Failed to match. If this is a /g or /G loop and we previously set - g_notempty after a null match, this is not necessarily the end. - We want to advance the start offset, and continue. Fudge the offset - values to achieve this. We won't be at the end of the string - that - was checked before setting g_notempty. */ - - else - { - if (g_notempty != 0) - { - offsets[0] = start_offset; - offsets[1] = start_offset + 1; - } - else - { - if (gmatched == 0) /* Error if no previous matches */ - { - if (count == -1) fprintf(outfile, "No match\n"); - else fprintf(outfile, "Error %d\n", count); - } - break; /* Out of the /g loop */ - } - } - - /* If not /g or /G we are done */ - - if (!do_g && !do_G) break; - - /* If we have matched an empty string, first check to see if we are at - the end of the subject. If so, the /g loop is over. Otherwise, mimic - what Perl's /g options does. This turns out to be rather cunning. First - we set PCRE_NOTEMPTY and PCRE_ANCHORED and try the match again at the - same point. If this fails (picked up above) we advance to the next - character. */ - - g_notempty = 0; - if (offsets[0] == offsets[1]) - { - if (offsets[0] == len) break; - g_notempty = PCRE_NOTEMPTY | PCRE_ANCHORED; - } - - /* For /g, update the start offset, leaving the rest alone */ - - if (do_g) start_offset = offsets[1]; - - /* For /G, update the pointer and length */ - - else - { - bptr += offsets[1]; - len -= offsets[1]; - } - } /* End of loop for /g and /G */ - } /* End of loop for data lines */ - - CONTINUE: - -#if !defined NOPOSIX - if (posix || do_posix) regfree(&preg); -#endif - - if (re != NULL) free(re); - if (extra != NULL) free(extra); - if (tables != NULL) - { - free((void *)tables); - setlocale(LC_CTYPE, "C"); - } - } - -fprintf(outfile, "\n"); -return 0; -} - -/* End */ diff --git a/external/privoxy/pcre/study.c b/external/privoxy/pcre/study.c deleted file mode 100644 index 676db94..0000000 --- a/external/privoxy/pcre/study.c +++ /dev/null @@ -1,397 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel <ph10(a)cam.ac.uk> - - Copyright (c) 1997-2000 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - - -/* Include the internals header, which itself includes Standard C headers plus -the external pcre header. */ - -#include "internal.h" - - - -/************************************************* -* Set a bit and maybe its alternate case * -*************************************************/ - -/* Given a character, set its bit in the table, and also the bit for the other -version of a letter if we are caseless. - -Arguments: - start_bits points to the bit map - c is the character - caseless the caseless flag - cd the block with char table pointers - -Returns: nothing -*/ - -static void -set_bit(uschar *start_bits, int c, BOOL caseless, compile_data *cd) -{ -start_bits[c/8] |= (1 << (c&7)); -if (caseless && (cd->ctypes[c] & ctype_letter) != 0) - start_bits[cd->fcc[c]/8] |= (1 << (cd->fcc[c]&7)); -} - - - -/************************************************* -* Create bitmap of starting chars * -*************************************************/ - -/* This function scans a compiled unanchored expression and attempts to build a -bitmap of the set of initial characters. If it can't, it returns FALSE. As time -goes by, we may be able to get more clever at doing this. - -Arguments: - code points to an expression - start_bits points to a 32-byte table, initialized to 0 - caseless the current state of the caseless flag - cd the block with char table pointers - -Returns: TRUE if table built, FALSE otherwise -*/ - -static BOOL -set_start_bits(const uschar *code, uschar *start_bits, BOOL caseless, - compile_data *cd) -{ -register int c; - -/* This next statement and the later reference to dummy are here in order to -trick the optimizer of the IBM C compiler for OS/2 into generating correct -code. Apparently IBM isn't going to fix the problem, and we would rather not -disable optimization (in this module it actually makes a big difference, and -the pcre module can use all the optimization it can get). */ - -volatile int dummy; - -do - { - const uschar *tcode = code + 3; - BOOL try_next = TRUE; - - while (try_next) - { - try_next = FALSE; - - /* If a branch starts with a bracket or a positive lookahead assertion, - recurse to set bits from within them. That's all for this branch. */ - - if ((int)*tcode >= OP_BRA || *tcode == OP_ASSERT) - { - if (!set_start_bits(tcode, start_bits, caseless, cd)) - return FALSE; - } - - else switch(*tcode) - { - default: - return FALSE; - - /* Skip over lookbehind and negative lookahead assertions */ - - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - try_next = TRUE; - do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT); - tcode += 3; - break; - - /* Skip over an option setting, changing the caseless flag */ - - case OP_OPT: - caseless = (tcode[1] & PCRE_CASELESS) != 0; - tcode += 2; - try_next = TRUE; - break; - - /* BRAZERO does the bracket, but carries on. */ - - case OP_BRAZERO: - case OP_BRAMINZERO: - if (!set_start_bits(++tcode, start_bits, caseless, cd)) - return FALSE; - dummy = 1; - do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT); - tcode += 3; - try_next = TRUE; - break; - - /* Single-char * or ? sets the bit and tries the next item */ - - case OP_STAR: - case OP_MINSTAR: - case OP_QUERY: - case OP_MINQUERY: - set_bit(start_bits, tcode[1], caseless, cd); - tcode += 2; - try_next = TRUE; - break; - - /* Single-char upto sets the bit and tries the next */ - - case OP_UPTO: - case OP_MINUPTO: - set_bit(start_bits, tcode[3], caseless, cd); - tcode += 4; - try_next = TRUE; - break; - - /* At least one single char sets the bit and stops */ - - case OP_EXACT: /* Fall through */ - tcode++; - - case OP_CHARS: /* Fall through */ - tcode++; - - case OP_PLUS: - case OP_MINPLUS: - set_bit(start_bits, tcode[1], caseless, cd); - break; - - /* Single character type sets the bits and stops */ - - case OP_NOT_DIGIT: - for (c = 0; c < 32; c++) - start_bits[c] |= ~cd->cbits[c+cbit_digit]; - break; - - case OP_DIGIT: - for (c = 0; c < 32; c++) - start_bits[c] |= cd->cbits[c+cbit_digit]; - break; - - case OP_NOT_WHITESPACE: - for (c = 0; c < 32; c++) - start_bits[c] |= ~cd->cbits[c+cbit_space]; - break; - - case OP_WHITESPACE: - for (c = 0; c < 32; c++) - start_bits[c] |= cd->cbits[c+cbit_space]; - break; - - case OP_NOT_WORDCHAR: - for (c = 0; c < 32; c++) - start_bits[c] |= ~cd->cbits[c+cbit_word]; - break; - - case OP_WORDCHAR: - for (c = 0; c < 32; c++) - start_bits[c] |= cd->cbits[c+cbit_word]; - break; - - /* One or more character type fudges the pointer and restarts, knowing - it will hit a single character type and stop there. */ - - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - tcode++; - try_next = TRUE; - break; - - case OP_TYPEEXACT: - tcode += 3; - try_next = TRUE; - break; - - /* Zero or more repeats of character types set the bits and then - try again. */ - - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - tcode += 2; /* Fall through */ - - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - switch(tcode[1]) - { - case OP_NOT_DIGIT: - for (c = 0; c < 32; c++) - start_bits[c] |= ~cd->cbits[c+cbit_digit]; - break; - - case OP_DIGIT: - for (c = 0; c < 32; c++) - start_bits[c] |= cd->cbits[c+cbit_digit]; - break; - - case OP_NOT_WHITESPACE: - for (c = 0; c < 32; c++) - start_bits[c] |= ~cd->cbits[c+cbit_space]; - break; - - case OP_WHITESPACE: - for (c = 0; c < 32; c++) - start_bits[c] |= cd->cbits[c+cbit_space]; - break; - - case OP_NOT_WORDCHAR: - for (c = 0; c < 32; c++) - start_bits[c] |= ~cd->cbits[c+cbit_word]; - break; - - case OP_WORDCHAR: - for (c = 0; c < 32; c++) - start_bits[c] |= cd->cbits[c+cbit_word]; - break; - } - - tcode += 2; - try_next = TRUE; - break; - - /* Character class: set the bits and either carry on or not, - according to the repeat count. */ - - case OP_CLASS: - { - tcode++; - for (c = 0; c < 32; c++) start_bits[c] |= tcode[c]; - tcode += 32; - switch (*tcode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRQUERY: - case OP_CRMINQUERY: - tcode++; - try_next = TRUE; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - if (((tcode[1] << 8) + tcode[2]) == 0) - { - tcode += 5; - try_next = TRUE; - } - break; - } - } - break; /* End of class handling */ - - } /* End of switch */ - } /* End of try_next loop */ - - code += (code[1] << 8) + code[2]; /* Advance to next branch */ - } -while (*code == OP_ALT); -return TRUE; -} - - - -/************************************************* -* Study a compiled expression * -*************************************************/ - -/* This function is handed a compiled expression that it must study to produce -information that will speed up the matching. It returns a pcre_extra block -which then gets handed back to pcre_exec(). - -Arguments: - re points to the compiled expression - options contains option bits - errorptr points to where to place error messages; - set NULL unless error - -Returns: pointer to a pcre_extra block, - NULL on error or if no optimization possible -*/ - -pcre_extra * -pcre_study(const pcre *external_re, int options, const char **errorptr) -{ -uschar start_bits[32]; -real_pcre_extra *extra; -const real_pcre *re = (const real_pcre *)external_re; -compile_data compile_block; - -*errorptr = NULL; - -if (re == NULL || re->magic_number != MAGIC_NUMBER) - { - *errorptr = "argument is not a compiled regular expression"; - return NULL; - } - -if ((options & ~PUBLIC_STUDY_OPTIONS) != 0) - { - *errorptr = "unknown or incorrect option bit(s) set"; - return NULL; - } - -/* For an anchored pattern, or an unchored pattern that has a first char, or a -multiline pattern that matches only at "line starts", no further processing at -present. */ - -if ((re->options & (PCRE_ANCHORED|PCRE_FIRSTSET|PCRE_STARTLINE)) != 0) - return NULL; - -/* Set the character tables in the block which is passed around */ - -compile_block.lcc = re->tables + lcc_offset; -compile_block.fcc = re->tables + fcc_offset; -compile_block.cbits = re->tables + cbits_offset; -compile_block.ctypes = re->tables + ctypes_offset; - -/* See if we can find a fixed set of initial characters for the pattern. */ - -memset(start_bits, 0, 32 * sizeof(uschar)); -if (!set_start_bits(re->code, start_bits, (re->options & PCRE_CASELESS) != 0, - &compile_block)) return NULL; - -/* Get an "extra" block and put the information therein. */ - -extra = (real_pcre_extra *)(pcre_malloc)(sizeof(real_pcre_extra)); - -if (extra == NULL) - { - *errorptr = "failed to get memory"; - return NULL; - } - -extra->options = PCRE_STUDY_MAPPED; -memcpy(extra->start_bits, start_bits, sizeof(start_bits)); - -return (pcre_extra *)extra; -} - -/* End of study.c */ diff --git a/external/privoxy/pcre/vc_dftables.dsp b/external/privoxy/pcre/vc_dftables.dsp deleted file mode 100755 index 60404f8..0000000 --- a/external/privoxy/pcre/vc_dftables.dsp +++ /dev/null @@ -1,296 +0,0 @@ -# Microsoft Developer Studio Project File - Name="vc_dftables" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 5.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=vc_dftables - Win32 Debug with Win32 threads -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "vc_dftables.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "vc_dftables.mak"\ - CFG="vc_dftables - Win32 Debug with Win32 threads" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "vc_dftables - Win32 Release" (based on\ - "Win32 (x86) Console Application") -!MESSAGE "vc_dftables - Win32 Debug" (based on\ - "Win32 (x86) Console Application") -!MESSAGE "vc_dftables - Win32 Debug with Win32 threads" (based on\ - "Win32 (x86) Console Application") -!MESSAGE "vc_dftables - Win32 Release with Win32 threads" (based on\ - "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe - -!IF "$(CFG)" == "vc_dftables - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "vc_dftables" -# PROP Intermediate_Dir "vc_dftables" -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD BASE RSC /l 0x809 /d "NDEBUG" -# ADD RSC /l 0x809 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# Begin Special Build Tool -OutDir=.\vc_dftables -SOURCE=$(InputPath) -PostBuild_Desc=Running program to generate chartables.c -PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c -# End Special Build Tool - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "Debug" -# PROP BASE Intermediate_Dir "Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "vc_dftables_dbg" -# PROP Intermediate_Dir "vc_dftables_dbg" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD BASE RSC /l 0x809 /d "_DEBUG" -# ADD RSC /l 0x809 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept -# Begin Special Build Tool -OutDir=.\vc_dftables_dbg -SOURCE=$(InputPath) -PostBuild_Desc=Running program to generate chartables.c -PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c -# End Special Build Tool - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "vc_dftab" -# PROP BASE Intermediate_Dir "vc_dftab" -# PROP BASE Ignore_Export_Lib 0 -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "vc_dftables_dbg" -# PROP Intermediate_Dir "vc_dftables_dbg" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD BASE RSC /l 0x809 /d "_DEBUG" -# ADD RSC /l 0x809 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept -# Begin Special Build Tool -OutDir=.\vc_dftables_dbg -SOURCE=$(InputPath) -PostBuild_Desc=Running program to generate chartables.c -PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c -# End Special Build Tool - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "vc_dfta0" -# PROP BASE Intermediate_Dir "vc_dfta0" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "vc_dftables" -# PROP Intermediate_Dir "vc_dftables" -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD BASE RSC /l 0x809 /d "NDEBUG" -# ADD RSC /l 0x809 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# Begin Special Build Tool -OutDir=.\vc_dftables -SOURCE=$(InputPath) -PostBuild_Desc=Running program to generate chartables.c -PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c -# End Special Build Tool - -!ENDIF - -# Begin Target - -# Name "vc_dftables - Win32 Release" -# Name "vc_dftables - Win32 Debug" -# Name "vc_dftables - Win32 Debug with Win32 threads" -# Name "vc_dftables - Win32 Release with Win32 threads" -# Begin Group "File Copy" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=..\vc_config_pthreads.h - -!IF "$(CFG)" == "vc_dftables - Win32 Release" - -# PROP Ignore_Default_Tool 1 -# Begin Custom Build - Copying vc_config_pthreads.h -WkspDir=. -InputPath=..\vc_config_pthreads.h - -"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" - copy "$(InputPath)" "$(WkspDir)\..\config.h" - -# End Custom Build - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug" - -# PROP Ignore_Default_Tool 1 -# Begin Custom Build - Copying vc_config_pthreads.h -WkspDir=. -InputPath=..\vc_config_pthreads.h - -"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" - copy "$(InputPath)" "$(WkspDir)\..\config.h" - -# End Custom Build - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads" - -# PROP Exclude_From_Build 1 -# PROP Ignore_Default_Tool 1 - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads" - -# PROP Exclude_From_Build 1 -# PROP Ignore_Default_Tool 1 - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=..\vc_config_winthreads.h - -!IF "$(CFG)" == "vc_dftables - Win32 Release" - -# PROP Exclude_From_Build 1 -# PROP Ignore_Default_Tool 1 - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug" - -# PROP Exclude_From_Build 1 -# PROP Ignore_Default_Tool 1 - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads" - -# PROP Ignore_Default_Tool 1 -# Begin Custom Build - Copying vc_config_winthreads.h -WkspDir=. -InputPath=..\vc_config_winthreads.h - -"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" - copy "$(InputPath)" "$(WkspDir)\..\config.h" - -# End Custom Build - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads" - -# PROP Ignore_Default_Tool 1 -# Begin Custom Build - Copying vc_config_winthreads.h -WkspDir=. -InputPath=..\vc_config_winthreads.h - -"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" - copy "$(InputPath)" "$(WkspDir)\..\config.h" - -# End Custom Build - -!ENDIF - -# End Source File -# End Group -# Begin Source File - -SOURCE=..\config.h -# End Source File -# Begin Source File - -SOURCE=.\config.h -# End Source File -# Begin Source File - -SOURCE=.\dftables.c -# End Source File -# Begin Source File - -SOURCE=.\internal.h -# End Source File -# Begin Source File - -SOURCE=.\maketables.c - -!IF "$(CFG)" == "vc_dftables - Win32 Release" - -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug" - -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads" - -# PROP BASE Exclude_From_Build 1 -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads" - -# PROP BASE Exclude_From_Build 1 -# PROP Exclude_From_Build 1 - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\pcre.h -# End Source File -# End Target -# End Project diff --git a/external/privoxy/pcrs.c b/external/privoxy/pcrs.c deleted file mode 100644 index 1946ca7..0000000 --- a/external/privoxy/pcrs.c +++ /dev/null @@ -1,1317 +0,0 @@ -const char pcrs_rcs[] = "$Id: pcrs.c,v 1.29 2007/09/22 16:17:19 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/pcrs.c,v $ - * - * Purpose : pcrs is a supplement to the pcre library by Philip Hazel - * <ph10(a)cam.ac.uk> and adds Perl-style substitution. That - * is, it mimics Perl's 's' operator. See pcrs(3) for details. - * - * WARNING: This file contains additional functions and bug - * fixes that aren't part of the latest official pcrs package - * (which apparently is no longer maintained). - * - * Copyright : Written and Copyright (C) 2000, 2001 by Andreas S. Oesterhelt - * <andreas(a)oesterhelt.org> - * - * Copyright (C) 2006, 2007 Fabian Keil <fk(a)fabiankeil.de> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU Lesser - * General Public License (LGPL), version 2.1, which should - * be included in this distribution (see LICENSE.txt), with - * the exception that the permission to replace that license - * with the GNU General Public License (GPL) given in section - * 3 is restricted to version 2 of the GPL. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the license for more details. - * - * The GNU Lesser General Public License should be included - * with this file. If not, you can view it at - * http://www.gnu.org/licenses/lgpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: pcrs.c,v $ - * Revision 1.29 2007/09/22 16:17:19 fabiankeil - * Move our includes below system includes to prevent macro conflicts. - * - * Revision 1.28 2007/08/18 14:37:27 fabiankeil - * Ditch hex_to_byte() in favour of xtoi(). - * - * Revision 1.27 2007/08/05 13:47:04 fabiankeil - * #1763173 from Stefan Huehner: s@const static@static const@. - * - * Revision 1.26 2007/07/01 13:29:54 fabiankeil - * Add limited hex notation support for the PCRS - * substitution text ('\x7e' = '~'). Closes #1627140. - * - * Revision 1.25 2007/04/30 15:02:18 fabiankeil - * Introduce dynamic pcrs jobs that can resolve variables. - * - * Revision 1.24 2007/01/05 15:46:12 fabiankeil - * Don't use strlen() to calculate the length of - * the pcrs substitutes. They don't have to be valid C - * strings and getting their length wrong can result in - * user-controlled memory corruption. - * - * Thanks to Felix Gröbert for reporting the problem - * and providing the fix [#1627140]. - * - * Revision 1.23 2006/12/29 17:53:05 fabiankeil - * Fixed gcc43 conversion warnings. - * - * Revision 1.22 2006/12/24 17:34:20 fabiankeil - * Add pcrs_strerror() message for PCRE_ERROR_MATCHLIMIT - * and give a hint why an error code might be unknown. - * - * Catch NULL subjects early in pcrs_execute(). - * - * Revision 1.21 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.19.2.4 2005/05/07 21:50:55 david__schmidt - * A few memory leaks plugged (mostly on error paths) - * - * Revision 1.19.2.3 2003/12/04 12:32:45 oes - * Append a trailing nullbyte to result to facilitate string processing - * - * Revision 1.19.2.2 2002/10/08 16:22:28 oes - * Bugfix: Need to check validity of backreferences explicitly, - * because when max_matches are reached and matches is expanded, - * realloc() does not zero the memory. Fixes Bug # 606227 - * - * Revision 1.19.2.1 2002/08/10 11:23:40 oes - * Include prce.h via project.h, where the appropriate - * source will have been selected - * - * Revision 1.19 2002/03/08 14:47:48 oes - * Cosmetics - * - * Revision 1.18 2002/03/08 14:17:14 oes - * Fixing -Wconversion warnings - * - * Revision 1.17 2002/03/08 13:45:48 oes - * Hiding internal functions - * - * Revision 1.16 2001/11/30 21:32:14 jongfoster - * Fixing signed/unsigned comparison (Andreas please check this!) - * One tab->space - * - * Revision 1.15 2001/09/20 16:11:06 steudten - * - * Add casting for some string functions. - * - * Revision 1.14 2001/09/09 21:41:57 oes - * Fixing yet another silly bug - * - * Revision 1.13 2001/09/06 14:05:59 oes - * Fixed silly bug - * - * Revision 1.12 2001/08/18 11:35:00 oes - * - Introduced pcrs_strerror() - * - made some NULL arguments non-fatal - * - added support for \n \r \e \b \t \f \a \0 in substitute - * - made quoting adhere to standard rules - * - added warning for bad backrefs - * - added pcrs_execute_list() - * - fixed comments - * - bugfix & cosmetics - * - * Revision 1.11 2001/08/15 15:32:03 oes - * - Added support for Perl's special variables $+, $' and $` - * - Improved the substitute parser - * - Replaced the hard limit for the maximum number of matches - * by dynamic reallocation - * - * Revision 1.10 2001/08/05 13:13:11 jongfoster - * Making parameters "const" where possible. - * - * Revision 1.9 2001/07/18 17:27:00 oes - * Changed interface; Cosmetics - * - * Revision 1.8 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.7 2001/06/29 13:33:04 oes - * - Cleaned up, renamed and reordered functions, - * improved comments - * - Removed my_strsep - * - Replaced globalflag with a general flags int - * that holds PCRS_GLOBAL, PCRS_SUCCESS, and PCRS_TRIVIAL - * - Introduced trivial option that will prevent pcrs - * from honouring backreferences in the substitute, - * which is useful for large substitutes that are - * red in from somewhere and saves the pain of escaping - * the backrefs - * - Introduced convenience function pcrs_free_joblist() - * - Split pcrs_make_job() into pcrs_compile(), which still - * takes a complete s/// comand as argument and parses it, - * and a new function pcrs_make_job, which takes the - * three separate components. This should make for a - * much friendlier frontend. - * - Removed create_pcrs_job() which was useless - * - Fixed a bug in pcrs_execute - * - Success flag is now handled by pcrs instead of user - * - * Revision 1.6 2001/06/03 19:12:45 oes - * added FIXME - * - * Revision 1.5 2001/05/29 09:50:24 jongfoster - * (Fixed one int -> size_t) - * - * Revision 1.4 2001/05/25 14:12:40 oes - * Fixed bug: Empty substitutes now detected - * - * Revision 1.3 2001/05/25 11:03:55 oes - * Added sanity check for NULL jobs to pcrs_exec_substitution - * - * Revision 1.2 2001/05/22 18:46:04 oes - * - * Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * Revision 1.1.1.1 2001/05/15 13:59:02 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include <string.h> -#include <ctype.h> -#include <assert.h> - -/* - * Include project.h just so that the right pcre.h gets - * included from there - */ -#include "project.h" - -/* For snprintf only */ -#include "miscutil.h" -/* For xtoi */ -#include "encode.h" - -#include "pcrs.h" - -const char pcrs_h_rcs[] = PCRS_H_VERSION; - -/* - * Internal prototypes - */ - -static int pcrs_parse_perl_options(const char *optstring, int *flags); -static pcrs_substitute *pcrs_compile_replacement(const char *replacement, int trivialflag, - int capturecount, int *errptr); -static int is_hex_sequence(const char *sequence); - -/********************************************************************* - * - * Function : pcrs_strerror - * - * Description : Return a string describing a given error code. - * - * Parameters : - * 1 : error = the error code - * - * Returns : char * to the descriptive string - * - *********************************************************************/ -const char *pcrs_strerror(const int error) -{ - if (error < 0) - { - switch (error) - { - /* Passed-through PCRE error: */ - case PCRE_ERROR_NOMEMORY: return "(pcre:) No memory"; - - /* Shouldn't happen unless PCRE or PCRS bug, or user messed with compiled job: */ - case PCRE_ERROR_NULL: return "(pcre:) NULL code or subject or ovector"; - case PCRE_ERROR_BADOPTION: return "(pcre:) Unrecognized option bit"; - case PCRE_ERROR_BADMAGIC: return "(pcre:) Bad magic number in code"; - case PCRE_ERROR_UNKNOWN_NODE: return "(pcre:) Bad node in pattern"; - - /* Can't happen / not passed: */ - case PCRE_ERROR_NOSUBSTRING: return "(pcre:) Fire in power supply"; - case PCRE_ERROR_NOMATCH: return "(pcre:) Water in power supply"; - -#ifdef PCRE_ERROR_MATCHLIMIT - /* - * Only reported by PCRE versions newer than our own. - */ - case PCRE_ERROR_MATCHLIMIT: return "(pcre:) Match limit reached"; -#endif /* def PCRE_ERROR_MATCHLIMIT */ - - /* PCRS errors: */ - case PCRS_ERR_NOMEM: return "(pcrs:) No memory"; - case PCRS_ERR_CMDSYNTAX: return "(pcrs:) Syntax error while parsing command"; - case PCRS_ERR_STUDY: return "(pcrs:) PCRE error while studying the pattern"; - case PCRS_ERR_BADJOB: return "(pcrs:) Bad job - NULL job, pattern or substitute"; - case PCRS_WARN_BADREF: return "(pcrs:) Backreference out of range"; - case PCRS_WARN_TRUNCATION: - return "(pcrs:) At least one variable was too big and has been truncated before compilation"; - - /* - * XXX: With the exception of PCRE_ERROR_MATCHLIMIT we - * only catch PCRE errors that can happen with our internal - * version. If Privoxy is linked against a newer - * PCRE version all bets are off ... - */ - default: return "Unknown error. Privoxy out of sync with PCRE?"; - } - } - /* error >= 0: No error */ - return "(pcrs:) Everything's just fine. Thanks for asking."; - -} - - -/********************************************************************* - * - * Function : pcrs_parse_perl_options - * - * Description : This function parses a string containing the options to - * Perl's s/// operator. It returns an integer that is the - * pcre equivalent of the symbolic optstring. - * Since pcre doesn't know about Perl's 'g' (global) or pcrs', - * 'T' (trivial) options but pcrs needs them, the corresponding - * flags are set if 'g'or 'T' is encountered. - * Note: The 'T' and 'U' options do not conform to Perl. - * - * Parameters : - * 1 : optstring = string with options in perl syntax - * 2 : flags = see description - * - * Returns : option integer suitable for pcre - * - *********************************************************************/ -static int pcrs_parse_perl_options(const char *optstring, int *flags) -{ - size_t i; - int rc = 0; - *flags = 0; - - if (NULL == optstring) return 0; - - for (i = 0; i < strlen(optstring); i++) - { - switch(optstring[i]) - { - case 'e': break; /* ToDo ;-) */ - case 'g': *flags |= PCRS_GLOBAL; break; - case 'i': rc |= PCRE_CASELESS; break; - case 'm': rc |= PCRE_MULTILINE; break; - case 'o': break; - case 's': rc |= PCRE_DOTALL; break; - case 'x': rc |= PCRE_EXTENDED; break; - case 'U': rc |= PCRE_UNGREEDY; break; - case 'T': *flags |= PCRS_TRIVIAL; break; - default: break; - } - } - return rc; - -} - - -/********************************************************************* - * - * Function : pcrs_compile_replacement - * - * Description : This function takes a Perl-style replacement (2nd argument - * to the s/// operator and returns a compiled pcrs_substitute, - * or NULL if memory allocation for the substitute structure - * fails. - * - * Parameters : - * 1 : replacement = replacement part of s/// operator - * in perl syntax - * 2 : trivialflag = Flag that causes backreferences to be - * ignored. - * 3 : capturecount = Number of capturing subpatterns in - * the pattern. Needed for $+ handling. - * 4 : errptr = pointer to an integer in which error - * conditions can be returned. - * - * Returns : pcrs_substitute data structure, or NULL if an - * error is encountered. In that case, *errptr has - * the reason. - * - *********************************************************************/ -static pcrs_substitute *pcrs_compile_replacement(const char *replacement, int trivialflag, int capturecount, int *errptr) -{ - int i, k, l, quoted; - size_t length; - char *text; - pcrs_substitute *r; - - i = k = l = quoted = 0; - - /* - * Sanity check - */ - if (NULL == replacement) - { - replacement = ""; - } - - /* - * Get memory or fail - */ - if (NULL == (r = (pcrs_substitute *)malloc(sizeof(pcrs_substitute)))) - { - *errptr = PCRS_ERR_NOMEM; - return NULL; - } - memset(r, '\0', sizeof(pcrs_substitute)); - - length = strlen(replacement); - - if (NULL == (text = (char *)malloc(length + 1))) - { - free(r); - *errptr = PCRS_ERR_NOMEM; - return NULL; - } - memset(text, '\0', length + 1); - - - /* - * In trivial mode, just copy the substitute text - */ - if (trivialflag) - { - text = strncpy(text, replacement, length + 1); - k = (int)length; - } - - /* - * Else, parse, cut out and record all backreferences - */ - else - { - while (i < (int)length) - { - /* Quoting */ - if (replacement[i] == '\\') - { - if (quoted) - { - text[k++] = replacement[i++]; - quoted = 0; - } - else - { - if (replacement[i+1] && strchr("tnrfae0", replacement[i+1])) - { - switch (replacement[++i]) - { - case 't': - text[k++] = '\t'; - break; - case 'n': - text[k++] = '\n'; - break; - case 'r': - text[k++] = '\r'; - break; - case 'f': - text[k++] = '\f'; - break; - case 'a': - text[k++] = 7; - break; - case 'e': - text[k++] = 27; - break; - case '0': - text[k++] = '\0'; - break; - } - i++; - } - else if (is_hex_sequence(&replacement[i])) - { - /* - * Replace a hex sequence with a single - * character with the sequence's ascii value. - * e.g.: '\x7e' => '~' - */ - const int ascii_value = xtoi(&replacement[i+2]); - - assert(ascii_value > 0); - assert(ascii_value < 256); - text[k++] = (char)ascii_value; - i += 4; - } - else - { - quoted = 1; - i++; - } - } - continue; - } - - /* Backreferences */ - if (replacement[i] == '$' && !quoted && i < (int)(length - 1)) - { - char *symbol, symbols[] = "'`+&"; - r->block_length[l] = (size_t)(k - r->block_offset[l]); - - /* Numerical backreferences */ - if (isdigit((int)replacement[i + 1])) - { - while (i < (int)length && isdigit((int)replacement[++i])) - { - r->backref[l] = r->backref[l] * 10 + replacement[i] - 48; - } - if (r->backref[l] > capturecount) - { - *errptr = PCRS_WARN_BADREF; - } - } - - /* Symbolic backreferences: */ - else if (NULL != (symbol = strchr(symbols, replacement[i + 1]))) - { - - if (symbol - symbols == 2) /* $+ */ - { - r->backref[l] = capturecount; - } - else if (symbol - symbols == 3) /* $& */ - { - r->backref[l] = 0; - } - else /* $' or $` */ - { - r->backref[l] = PCRS_MAX_SUBMATCHES + 1 - (symbol - symbols); - } - i += 2; - } - - /* Invalid backref -> plain '$' */ - else - { - goto plainchar; - } - - /* Valid and in range? -> record */ - if (r->backref[l] < PCRS_MAX_SUBMATCHES + 2) - { - r->backref_count[r->backref[l]] += 1; - r->block_offset[++l] = k; - } - else - { - *errptr = PCRS_WARN_BADREF; - } - continue; - } - -plainchar: - /* Plain chars are copied */ - text[k++] = replacement[i++]; - quoted = 0; - } - } /* -END- if (!trivialflag) */ - - /* - * Finish & return - */ - r->text = text; - r->backrefs = l; - r->length = (size_t)k; - r->block_length[l] = (size_t)(k - r->block_offset[l]); - - return r; - -} - - -/********************************************************************* - * - * Function : pcrs_free_job - * - * Description : Frees the memory used by a pcrs_job struct and its - * dependant structures. - * - * Parameters : - * 1 : job = pointer to the pcrs_job structure to be freed - * - * Returns : a pointer to the next job, if there was any, or - * NULL otherwise. - * - *********************************************************************/ -pcrs_job *pcrs_free_job(pcrs_job *job) -{ - pcrs_job *next; - - if (job == NULL) - { - return NULL; - } - else - { - next = job->next; - if (job->pattern != NULL) free(job->pattern); - if (job->hints != NULL) free(job->hints); - if (job->substitute != NULL) - { - if (job->substitute->text != NULL) free(job->substitute->text); - free(job->substitute); - } - free(job); - } - return next; - -} - - -/********************************************************************* - * - * Function : pcrs_free_joblist - * - * Description : Iterates through a chained list of pcrs_job's and - * frees them using pcrs_free_job. - * - * Parameters : - * 1 : joblist = pointer to the first pcrs_job structure to - * be freed - * - * Returns : N/A - * - *********************************************************************/ -void pcrs_free_joblist(pcrs_job *joblist) -{ - while ( NULL != (joblist = pcrs_free_job(joblist)) ) {}; - - return; - -} - - -/********************************************************************* - * - * Function : pcrs_compile_command - * - * Description : Parses a string with a Perl-style s/// command, - * calls pcrs_compile, and returns a corresponding - * pcrs_job, or NULL if parsing or compiling the job - * fails. - * - * Parameters : - * 1 : command = string with perl-style s/// command - * 2 : errptr = pointer to an integer in which error - * conditions can be returned. - * - * Returns : a corresponding pcrs_job data structure, or NULL - * if an error was encountered. In that case, *errptr - * has the reason. - * - *********************************************************************/ -pcrs_job *pcrs_compile_command(const char *command, int *errptr) -{ - int i, k, l, quoted = FALSE; - size_t limit; - char delimiter; - char *tokens[4]; - pcrs_job *newjob; - - i = k = l = 0; - - /* - * Tokenize the perl command - */ - limit = strlen(command); - if (limit < 4) - { - *errptr = PCRS_ERR_CMDSYNTAX; - return NULL; - } - else - { - delimiter = command[1]; - } - - tokens[l] = (char *) malloc(limit + 1); - - for (i = 0; i <= (int)limit; i++) - { - - if (command[i] == delimiter && !quoted) - { - if (l == 3) - { - l = -1; - break; - } - tokens[0][k++] = '\0'; - tokens[++l] = tokens[0] + k; - continue; - } - - else if (command[i] == '\\' && !quoted) - { - quoted = TRUE; - if (command[i+1] == delimiter) continue; - } - else - { - quoted = FALSE; - } - tokens[0][k++] = command[i]; - } - - /* - * Syntax error ? - */ - if (l != 3) - { - *errptr = PCRS_ERR_CMDSYNTAX; - free(tokens[0]); - return NULL; - } - - newjob = pcrs_compile(tokens[1], tokens[2], tokens[3], errptr); - free(tokens[0]); - return newjob; - -} - - -/********************************************************************* - * - * Function : pcrs_compile - * - * Description : Takes the three arguments to a perl s/// command - * and compiles a pcrs_job structure from them. - * - * Parameters : - * 1 : pattern = string with perl-style pattern - * 2 : substitute = string with perl-style substitute - * 3 : options = string with perl-style options - * 4 : errptr = pointer to an integer in which error - * conditions can be returned. - * - * Returns : a corresponding pcrs_job data structure, or NULL - * if an error was encountered. In that case, *errptr - * has the reason. - * - *********************************************************************/ -pcrs_job *pcrs_compile(const char *pattern, const char *substitute, const char *options, int *errptr) -{ - pcrs_job *newjob; - int flags; - int capturecount; - const char *error; - - *errptr = 0; - - /* - * Handle NULL arguments - */ - if (pattern == NULL) pattern = ""; - if (substitute == NULL) substitute = ""; - - - /* - * Get and init memory - */ - if (NULL == (newjob = (pcrs_job *)malloc(sizeof(pcrs_job)))) - { - *errptr = PCRS_ERR_NOMEM; - return NULL; - } - memset(newjob, '\0', sizeof(pcrs_job)); - - - /* - * Evaluate the options - */ - newjob->options = pcrs_parse_perl_options(options, &flags); - newjob->flags = flags; - - - /* - * Compile the pattern - */ - newjob->pattern = pcre_compile(pattern, newjob->options, &error, errptr, NULL); - if (newjob->pattern == NULL) - { - pcrs_free_job(newjob); - return NULL; - } - - - /* - * Generate hints. This has little overhead, since the - * hints will be NULL for a boring pattern anyway. - */ - newjob->hints = pcre_study(newjob->pattern, 0, &error); - if (error != NULL) - { - *errptr = PCRS_ERR_STUDY; - pcrs_free_job(newjob); - return NULL; - } - - - /* - * Determine the number of capturing subpatterns. - * This is needed for handling $+ in the substitute. - */ - if (0 > (*errptr = pcre_fullinfo(newjob->pattern, newjob->hints, PCRE_INFO_CAPTURECOUNT, &capturecount))) - { - pcrs_free_job(newjob); - return NULL; - } - - - /* - * Compile the substitute - */ - if (NULL == (newjob->substitute = pcrs_compile_replacement(substitute, newjob->flags & PCRS_TRIVIAL, capturecount, errptr))) - { - pcrs_free_job(newjob); - return NULL; - } - - return newjob; - -} - - -/********************************************************************* - * - * Function : pcrs_execute_list - * - * Description : This is a multiple job wrapper for pcrs_execute(). - * Apply the regular substitutions defined by the jobs in - * the joblist to the subject. - * The subject itself is left untouched, memory for the result - * is malloc()ed and it is the caller's responsibility to free - * the result when it's no longer needed. - * - * Note: For convenient string handling, a null byte is - * appended to the result. It does not count towards the - * result_length, though. - * - * - * Parameters : - * 1 : joblist = the chained list of pcrs_jobs to be executed - * 2 : subject = the subject string - * 3 : subject_length = the subject's length - * 4 : result = char** for returning the result - * 5 : result_length = size_t* for returning the result's length - * - * Returns : On success, the number of substitutions that were made. - * May be > 1 if job->flags contained PCRS_GLOBAL - * On failure, the (negative) pcre error code describing the - * failure, which may be translated to text using pcrs_strerror(). - * - *********************************************************************/ -int pcrs_execute_list(pcrs_job *joblist, char *subject, size_t subject_length, char **result, size_t *result_length) -{ - pcrs_job *job; - char *old, *new = NULL; - int hits, total_hits; - - old = subject; - *result_length = subject_length; - hits = total_hits = 0; - - for (job = joblist; job != NULL; job = job->next) - { - hits = pcrs_execute(job, old, *result_length, &new, result_length); - - if (old != subject) free(old); - - if (hits < 0) - { - return(hits); - } - else - { - total_hits += hits; - old = new; - } - } - - *result = new; - return(total_hits); - -} - - -/********************************************************************* - * - * Function : pcrs_execute - * - * Description : Apply the regular substitution defined by the job to the - * subject. - * The subject itself is left untouched, memory for the result - * is malloc()ed and it is the caller's responsibility to free - * the result when it's no longer needed. - * - * Note: For convenient string handling, a null byte is - * appended to the result. It does not count towards the - * result_length, though. - * - * Parameters : - * 1 : job = the pcrs_job to be executed - * 2 : subject = the subject (== original) string - * 3 : subject_length = the subject's length - * 4 : result = char** for returning the result - * 5 : result_length = size_t* for returning the result's length - * - * Returns : On success, the number of substitutions that were made. - * May be > 1 if job->flags contained PCRS_GLOBAL - * On failure, the (negative) pcre error code describing the - * failure, which may be translated to text using pcrs_strerror(). - * - *********************************************************************/ -int pcrs_execute(pcrs_job *job, const char *subject, size_t subject_length, char **result, size_t *result_length) -{ - int offsets[3 * PCRS_MAX_SUBMATCHES], - offset, - i, k, - matches_found, - submatches, - max_matches = PCRS_MAX_MATCH_INIT; - size_t newsize; - pcrs_match *matches, *dummy; - char *result_offset; - - offset = i = k = 0; - - /* - * Sanity check & memory allocation - */ - if (job == NULL || job->pattern == NULL || job->substitute == NULL || NULL == subject) - { - *result = NULL; - return(PCRS_ERR_BADJOB); - } - - if (NULL == (matches = (pcrs_match *)malloc((size_t)max_matches * sizeof(pcrs_match)))) - { - *result = NULL; - return(PCRS_ERR_NOMEM); - } - memset(matches, '\0', (size_t)max_matches * sizeof(pcrs_match)); - - - /* - * Find the pattern and calculate the space - * requirements for the result - */ - newsize = subject_length; - - while ((submatches = pcre_exec(job->pattern, job->hints, subject, (int)subject_length, offset, 0, offsets, 3 * PCRS_MAX_SUBMATCHES)) > 0) - { - job->flags |= PCRS_SUCCESS; - matches[i].submatches = submatches; - - for (k = 0; k < submatches; k++) - { - matches[i].submatch_offset[k] = offsets[2 * k]; - - /* Note: Non-found optional submatches have length -1-(-1)==0 */ - matches[i].submatch_length[k] = (size_t)(offsets[2 * k + 1] - offsets[2 * k]); - - /* reserve mem for each submatch as often as it is ref'd */ - newsize += matches[i].submatch_length[k] * (size_t)job->substitute->backref_count[k]; - } - /* plus replacement text size minus match text size */ - newsize += job->substitute->length - matches[i].submatch_length[0]; - - /* chunk before match */ - matches[i].submatch_offset[PCRS_MAX_SUBMATCHES] = 0; - matches[i].submatch_length[PCRS_MAX_SUBMATCHES] = (size_t)offsets[0]; - newsize += (size_t)offsets[0] * (size_t)job->substitute->backref_count[PCRS_MAX_SUBMATCHES]; - - /* chunk after match */ - matches[i].submatch_offset[PCRS_MAX_SUBMATCHES + 1] = offsets[1]; - matches[i].submatch_length[PCRS_MAX_SUBMATCHES + 1] = subject_length - (size_t)offsets[1] - 1; - newsize += (subject_length - (size_t)offsets[1]) * (size_t)job->substitute->backref_count[PCRS_MAX_SUBMATCHES + 1]; - - /* Storage for matches exhausted? -> Extend! */ - if (++i >= max_matches) - { - max_matches = (int)(max_matches * PCRS_MAX_MATCH_GROW); - if (NULL == (dummy = (pcrs_match *)realloc(matches, (size_t)max_matches * sizeof(pcrs_match)))) - { - free(matches); - *result = NULL; - return(PCRS_ERR_NOMEM); - } - matches = dummy; - } - - /* Non-global search or limit reached? */ - if (!(job->flags & PCRS_GLOBAL)) break; - - /* Don't loop on empty matches */ - if (offsets[1] == offset) - if ((size_t)offset < subject_length) - offset++; - else - break; - /* Go find the next one */ - else - offset = offsets[1]; - } - /* Pass pcre error through if (bad) failiure */ - if (submatches < PCRE_ERROR_NOMATCH) - { - free(matches); - return submatches; - } - matches_found = i; - - - /* - * Get memory for the result (must be freed by caller!) - * and append terminating null byte. - */ - if ((*result = (char *)malloc(newsize + 1)) == NULL) - { - free(matches); - return PCRS_ERR_NOMEM; - } - else - { - (*result)[newsize] = '\0'; - } - - - /* - * Replace - */ - offset = 0; - result_offset = *result; - - for (i = 0; i < matches_found; i++) - { - /* copy the chunk preceding the match */ - memcpy(result_offset, subject + offset, (size_t)(matches[i].submatch_offset[0] - offset)); - result_offset += matches[i].submatch_offset[0] - offset; - - /* For every segment of the substitute.. */ - for (k = 0; k <= job->substitute->backrefs; k++) - { - /* ...copy its text.. */ - memcpy(result_offset, job->substitute->text + job->substitute->block_offset[k], job->substitute->block_length[k]); - result_offset += job->substitute->block_length[k]; - - /* ..plus, if it's not the last chunk, i.e.: There *is* a backref.. */ - if (k != job->substitute->backrefs - /* ..in legal range.. */ - && job->substitute->backref[k] < PCRS_MAX_SUBMATCHES + 2 - /* ..and referencing a real submatch.. */ - && job->substitute->backref[k] < matches[i].submatches - /* ..that is nonempty.. */ - && matches[i].submatch_length[job->substitute->backref[k]] > 0) - { - /* ..copy the submatch that is ref'd. */ - memcpy( - result_offset, - subject + matches[i].submatch_offset[job->substitute->backref[k]], - matches[i].submatch_length[job->substitute->backref[k]] - ); - result_offset += matches[i].submatch_length[job->substitute->backref[k]]; - } - } - offset = matches[i].submatch_offset[0] + (int)matches[i].submatch_length[0]; - } - - /* Copy the rest. */ - memcpy(result_offset, subject + offset, subject_length - (size_t)offset); - - *result_length = newsize; - free(matches); - return matches_found; - -} - - -#define is_hex_digit(x) ((x) && strchr("0123456789ABCDEF", toupper(x))) - -/********************************************************************* - * - * Function : is_hex_sequence - * - * Description : Checks the first four characters of a string - * and decides if they are a valid hex sequence - * (like '\x40'). - * - * Parameters : - * 1 : sequence = The string to check - * - * Returns : Non-zero if it's valid sequence, or - * Zero if it isn't. - * - *********************************************************************/ -static int is_hex_sequence(const char *sequence) -{ - return (sequence[0] == '\\' && - sequence[1] == 'x' && - is_hex_digit(sequence[2]) && - is_hex_digit(sequence[3])); -} - - -/* - * Functions below this line are only part of the pcrs version - * included in Privoxy. If you use any of them you should not - * try to dynamically link against external pcrs versions. - */ - -/********************************************************************* - * - * Function : pcrs_job_is_dynamic - * - * Description : Checks if a job has the "D" (dynamic) option set. - * - * Parameters : - * 1 : job = The job to check - * - * Returns : TRUE if the job is indeed dynamic, otherwise - * FALSE - * - *********************************************************************/ -int pcrs_job_is_dynamic (char *job) -{ - const char delimiter = job[1]; - const size_t length = strlen(job); - char *option; - - if (length < 5) - { - /* - * The shortest valid (but useless) - * dynamic pattern is "s@@@D" - */ - return FALSE; - } - - /* - * Everything between the last character - * and the last delimiter is an option ... - */ - for (option = job + length; *option != delimiter; option--) - { - if (*option == 'D') - { - /* - * ... and if said option is 'D' the job is dynamic. - */ - return TRUE; - } - } - return FALSE; - -} - - -/********************************************************************* - * - * Function : pcrs_get_delimiter - * - * Description : Tries to find a character that is safe to - * be used as a pcrs delimiter for a certain string. - * - * Parameters : - * 1 : string = The string to search in - * - * Returns : A safe delimiter if one was found, otherwise '\0'. - * - *********************************************************************/ -char pcrs_get_delimiter(const char *string) -{ - /* - * Some characters that are unlikely to - * be part of pcrs replacement strings. - */ - char delimiters[] = "><§#+*~%^°-:;µ!@"; - char *d = delimiters; - - /* Take the first delimiter that isn't part of the string */ - while (*d && NULL != strchr(string, *d)) - { - d++; - } - return *d; - -} - - -/********************************************************************* - * - * Function : pcrs_execute_single_command - * - * Description : Apply single pcrs command to the subject. - * The subject itself is left untouched, memory for the result - * is malloc()ed and it is the caller's responsibility to free - * the result when it's no longer needed. - * - * Parameters : - * 1 : subject = the subject (== original) string - * 2 : pcrs_command = the pcrs command as string (s@foo@bar@) - * 3 : hits = int* for returning the number of modifications - * - * Returns : NULL in case of errors, otherwise the - * result of the pcrs command. - * - *********************************************************************/ -char *pcrs_execute_single_command(const char *subject, const char *pcrs_command, int *hits) -{ - size_t size; - char *result = NULL; - pcrs_job *job; - - assert(subject); - assert(pcrs_command); - - *hits = 0; - size = strlen(subject); - - job = pcrs_compile_command(pcrs_command, hits); - if (NULL != job) - { - *hits = pcrs_execute(job, subject, size, &result, &size); - if (*hits < 0) - { - freez(result); - } - pcrs_free_job(job); - } - return result; - -} - - -static const char warning[] = "... [too long, truncated]"; -/********************************************************************* - * - * Function : pcrs_compile_dynamic_command - * - * Description : Takes a dynamic pcrs command, fills in the - * values of the variables and compiles it. - * - * Parameters : - * 1 : csp = Current client state (buffers, headers, etc...) - * 2 : pcrs_command = The dynamic pcrs command to compile - * 3 : v = NULL terminated array of variables and their values. - * 4 : error = pcrs error code - * - * Returns : NULL in case of hard errors, otherwise the - * compiled pcrs job. - * - *********************************************************************/ -pcrs_job *pcrs_compile_dynamic_command(char *pcrs_command, const struct pcrs_variable v[], int *error) -{ - char buf[PCRS_BUFFER_SIZE]; - const char *original_pcrs_command = pcrs_command; - char *pcrs_command_tmp = NULL; - pcrs_job *job = NULL; - int truncation = 0; - char d; - int ret; - - while ((NULL != v->name) && (NULL != pcrs_command)) - { - assert(NULL != v->value); - - if (NULL == strstr(pcrs_command, v->name)) - { - /* - * Skip the substitution if the variable - * name isn't part of the pattern. - */ - v++; - continue; - } - - /* Use pcrs to replace the variable with its value. */ - d = pcrs_get_delimiter(v->value); - if ('\0' == d) - { - /* No proper delimiter found */ - *error = PCRS_ERR_CMDSYNTAX; - return NULL; - } - - /* - * Variable names are supposed to contain alpha - * numerical characters plus '_' only. - */ - assert(NULL == strchr(v->name, d)); - - ret = snprintf(buf, sizeof(buf), "s%c\\$%s%c%s%cgT", d, v->name, d, v->value, d); - assert(ret >= 0); - if (ret >= sizeof(buf)) - { - /* - * Value didn't completely fit into buffer, - * overwrite the end of the substitution text - * with a truncation message and close the pattern - * properly. - */ - const size_t trailer_size = sizeof(warning) + 3; /* 3 for d + "gT" */ - char *trailer_start = buf + sizeof(buf) - trailer_size; - - ret = snprintf(trailer_start, trailer_size, "%s%cgT", warning, d); - assert(ret == trailer_size - 1); - assert(sizeof(buf) == strlen(buf) + 1); - truncation = 1; - } - - pcrs_command_tmp = pcrs_execute_single_command(pcrs_command, buf, error); - if (NULL == pcrs_command_tmp) - { - return NULL; - } - - if (pcrs_command != original_pcrs_command) - { - freez(pcrs_command); - } - pcrs_command = pcrs_command_tmp; - - v++; - } - - job = pcrs_compile_command(pcrs_command, error); - if (pcrs_command != original_pcrs_command) - { - freez(pcrs_command); - } - - if (truncation) - { - *error = PCRS_WARN_TRUNCATION; - } - - return job; - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/pcrs.h b/external/privoxy/pcrs.h deleted file mode 100644 index b8939c0..0000000 --- a/external/privoxy/pcrs.h +++ /dev/null @@ -1,221 +0,0 @@ -#ifndef PCRS_H_INCLUDED -#define PCRS_H_INCLUDED - -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/pcrs.h,v $ - * - * Purpose : Header file for pcrs.c - * - * Copyright : see pcrs.c - * - * Revisions : - * $Log: pcrs.h,v $ - * Revision 1.16 2007/04/30 15:02:19 fabiankeil - * Introduce dynamic pcrs jobs that can resolve variables. - * - * Revision 1.15 2007/01/05 15:46:12 fabiankeil - * Don't use strlen() to calculate the length of - * the pcrs substitutes. They don't have to be valid C - * strings and getting their length wrong can result in - * user-controlled memory corruption. - * - * Thanks to Felix Gröbert for reporting the problem - * and providing the fix [#1627140]. - * - * Revision 1.14 2006/12/24 17:27:37 fabiankeil - * Increase pcrs error code offset to prevent overlaps - * with pcre versions newer than our own. - * - * Revision 1.13 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.11 2002/03/08 14:18:23 oes - * Fixing -Wconversion warnings - * - * Revision 1.10 2002/03/08 13:44:48 oes - * Hiding internal functions, preventing double inclusion of pcre.h - * - * Revision 1.9 2001/08/18 11:35:29 oes - * - Introduced pcrs_strerror() - * - added pcrs_execute_list() - * - * Revision 1.8 2001/08/15 15:32:50 oes - * Replaced the hard limit for the maximum number of matches - * by dynamic reallocation - * - * Revision 1.7 2001/08/05 13:13:11 jongfoster - * Making parameters "const" where possible. - * - * Revision 1.6 2001/07/29 18:52:06 jongfoster - * Renaming _PCRS_H, and adding "extern C {}" - * - * Revision 1.5 2001/07/18 17:27:00 oes - * Changed interface; Cosmetics - * - * Revision 1.4 2001/06/29 13:33:19 oes - * - Cleaned up, commented and adapted to reflect the - * changes in pcrs.c - * - Introduced the PCRS_* flags - * - * Revision 1.3 2001/06/09 10:58:57 jongfoster - * Removing a single unused #define which referenced BUFSIZ - * - * Revision 1.2 2001/05/25 11:03:55 oes - * Added sanity check for NULL jobs to pcrs_exec_substitution - * - * Revision 1.1.1.1 2001/05/15 13:59:02 oes - * Initial import of version 2.9.3 source tree - * - * Revision 1.4 2001/05/11 01:57:02 rodney - * Added new file header standard w/RCS control tags. - * - * revision 1.3 2001/05/08 02:38:13 rodney - * Changed C++ "//" style comment to C style comments. - * - * revision 1.2 2001/04/30 02:39:24 rodney - * Made this pcrs.h file conditionally included. - * - * revision 1.1 2001/04/16 21:10:38 rodney - * Initial checkin - * - *********************************************************************/ - -#define PCRS_H_VERSION "$Id: pcrs.h,v 1.16 2007/04/30 15:02:19 fabiankeil Exp $" - - -#ifndef _PCRE_H -#include <pcre.h> -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Constants: - */ - -#define FALSE 0 -#define TRUE 1 - -/* Capacity */ -#define PCRS_MAX_SUBMATCHES 33 /* Maximum number of capturing subpatterns allowed. MUST be <= 99! FIXME: Should be dynamic */ -#define PCRS_MAX_MATCH_INIT 40 /* Initial amount of matches that can be stored in global searches */ -#define PCRS_MAX_MATCH_GROW 1.6 /* Factor by which storage for matches is extended if exhausted */ - -/* - * PCRS error codes - * - * They are supposed to be handled together with PCRE error - * codes and have to start with an offset to prevent overlaps. - * - * PCRE 6.7 uses error codes from -1 to -21, PCRS error codes - * below -100 should be safe for a while. - */ -#define PCRS_ERR_NOMEM -100 /* Failed to acquire memory. */ -#define PCRS_ERR_CMDSYNTAX -101 /* Syntax of s///-command */ -#define PCRS_ERR_STUDY -102 /* pcre error while studying the pattern */ -#define PCRS_ERR_BADJOB -103 /* NULL job pointer, pattern or substitute */ -#define PCRS_WARN_BADREF -104 /* Backreference out of range */ -#define PCRS_WARN_TRUNCATION -105 /* At least one pcrs variable was too big, - * only the first part was used. */ - -/* Flags */ -#define PCRS_GLOBAL 1 /* Job should be applied globally, as with perl's g option */ -#define PCRS_TRIVIAL 2 /* Backreferences in the substitute are ignored */ -#define PCRS_SUCCESS 4 /* Job did previously match */ - - -/* - * Data types: - */ - -/* A compiled substitute */ - -typedef struct { - char *text; /* The plaintext part of the substitute, with all backreferences stripped */ - size_t length; /* The substitute may not be a valid C string so we can't rely on strlen(). */ - int backrefs; /* The number of backreferences */ - int block_offset[PCRS_MAX_SUBMATCHES]; /* Array with the offsets of all plaintext blocks in text */ - size_t block_length[PCRS_MAX_SUBMATCHES]; /* Array with the lengths of all plaintext blocks in text */ - int backref[PCRS_MAX_SUBMATCHES]; /* Array with the backref number for all plaintext block borders */ - int backref_count[PCRS_MAX_SUBMATCHES + 2]; /* Array with the number of references to each backref index */ -} pcrs_substitute; - - -/* - * A match, including all captured subpatterns (submatches) - * Note: The zeroth is the whole match, the PCRS_MAX_SUBMATCHES + 0th - * is the range before the match, the PCRS_MAX_SUBMATCHES + 1th is the - * range after the match. - */ - -typedef struct { - int submatches; /* Number of captured subpatterns */ - int submatch_offset[PCRS_MAX_SUBMATCHES + 2]; /* Offset for each submatch in the subject */ - size_t submatch_length[PCRS_MAX_SUBMATCHES + 2]; /* Length of each submatch in the subject */ -} pcrs_match; - - -/* A PCRS job */ - -typedef struct PCRS_JOB { - pcre *pattern; /* The compiled pcre pattern */ - pcre_extra *hints; /* The pcre hints for the pattern */ - int options; /* The pcre options (numeric) */ - int flags; /* The pcrs and user flags (see "Flags" above) */ - pcrs_substitute *substitute; /* The compiled pcrs substitute */ - struct PCRS_JOB *next; /* Pointer for chaining jobs to joblists */ -} pcrs_job; - - -/* - * Prototypes: - */ - -/* Main usage */ -extern pcrs_job *pcrs_compile_command(const char *command, int *errptr); -extern pcrs_job *pcrs_compile(const char *pattern, const char *substitute, const char *options, int *errptr); -extern int pcrs_execute(pcrs_job *job, const char *subject, size_t subject_length, char **result, size_t *result_length); -extern int pcrs_execute_list(pcrs_job *joblist, char *subject, size_t subject_length, char **result, size_t *result_length); - -/* Freeing jobs */ -extern pcrs_job *pcrs_free_job(pcrs_job *job); -extern void pcrs_free_joblist(pcrs_job *joblist); - -/* Info on errors: */ -extern const char *pcrs_strerror(const int error); - -extern int pcrs_job_is_dynamic(char *job); -extern char pcrs_get_delimiter(const char *string); -extern char *pcrs_execute_single_command(const char *subject, const char *pcrs_command, int *hits); -/* - * Variable/value pair for dynamic pcrs commands. - */ -struct pcrs_variable -{ - const char *name; - char *value; - int static_value; -}; - -extern pcrs_job *pcrs_compile_dynamic_command(char *pcrs_command, const struct pcrs_variable v[], int *error); - -/* Only relevant for maximum pcrs variable size */ -#ifndef PCRS_BUFFER_SIZE -#define PCRS_BUFFER_SIZE 4000 -#endif /* ndef PCRS_BUFFER_SIZE */ - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef PCRS_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/privoxy-generic.init b/external/privoxy/privoxy-generic.init deleted file mode 100755 index 53b4127..0000000 --- a/external/privoxy/privoxy-generic.init +++ /dev/null @@ -1,182 +0,0 @@ -#!/bin/sh -# -# ******************************************************************** -# -# File : $Source: /cvsroot/ijbswa/current/privoxy-generic.init,v $ -# -# Purpose : This shell script takes care of starting and stopping -# privoxy. -# -# Copyright : Written by and Copyright (C) 2001,2002 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Developer's NOTE: This script should be tested against a true /bin/sh, which -# has notable differences from bash. By design, this script does not try to do -# too much, so as to be as cross-platform as possible. -# -# -# Revisions : -# $Log: privoxy-generic.init,v $ -# Revision 1.8 2007/06/09 12:35:54 fabiankeil -# Add /usr/xpg4/bin to the PATH to make sure the POSIX -# version of id is used on Solaris. Closes BR#1733788. -# Thanks to Brent Chivers for report and fix. -# -# Revision 1.7 2006/10/14 14:12:22 fabiankeil -# Print warnings if the user tries to run Privoxy as root -# or if the script is run without root privileges; -# only use "--user" if run with root privileges and -# don't depend on $USER being set to root. Fixes BR 779781. -# -# Apparently $USER isn't set on all systems, -# but it also didn't work if the user only -# increased her privileges with su or sudo, -# but still had her real uid in $USER. -# -# Thanks to Florian Effenberger for reporting. -# -# Revision 1.6 2006/07/18 14:48:47 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.5.2.1 2002/10/17 17:04:22 hal9 -# Add from main trunk. Will be needed for make install. -# -# Revision 1.5 2002/10/17 17:01:29 hal9 -# Set paths to match the defaults for a root install. Force remove PIDFILE on -# stop. -# -# Revision 1.4 2002/09/11 01:15:02 hal9 -# Fix typo in variable. Now tested on Solaris and Linux, with defaults. -# -# Revision 1.3 2002/09/11 01:09:14 hal9 -# Better handling of pidfile, and process owner. -# -# Revision 1.2 2002/09/08 20:27:58 hal9 -# -Rewrote script config section. -# -Added comments to script. -# -Tried to add logic to use a --user privoxy, if available. -# -Minor script changes due to 'echo -n' does not work on a true -# /bin/sh system. -# -# Revision 1.1 2002/09/06 00:20:26 hal9 -# Creating a generic init script, meant to be used on platforms where don't have -# a custom init script. -# -# Revision 1.0 2002/09/05 17:14:32 hal9 -# -####################################################################### - -# Is this needed by Solaris? -#ident "@(#)privoxy 1.0 02/09/05" - -# NOTE: This script may require editing to ensure proper location of -# config file, and the privoxy executable. Care should be taken to ensure -# logfile is writable by $P_USER (logfile is defined in config), and that -# there is suitable write access for $P_PIDFILE. - -PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/xpg4/bin:/usr/bin:/sbin:/bin -P_NAME=Privoxy -# Path to executable. -P_DAEMON=privoxy -# Full path to location of Privoxy config file. -P_CONF_FILE=/usr/local/etc/privoxy/config -# Full path to PID file location. Location must be writable by -# whoever runs this script and by Privoxy itself. -P_PIDFILE=/var/run/privoxy.pid -# If uncommented, this script will try to run as USER=privoxy, which -# may require special handling of config, *.action, trust, logfile, -# jarfile, and pidfile. -P_USER=privoxy - -# If a privoxy user is specified, lets try that. /bin/sh does not seem to -# know about $UID. -if [ 0 = `id -u` ]; then - if [ -n "$P_USER" ]; then - id $P_USER 2>/dev/null >/dev/null - if [ $? -eq 0 ]; then - P_USER_SETTINGS="--user $P_USER" - else - echo "User $P_USER doesn't exist, exiting." - exit 1 - fi - else - # The user has sufficient rights, but $P_USER isn't set - echo "Running Privoxy as root is not recommended!" - P_USER_SETTINGS="" - fi -else - # The user has insufficient rights to run Privoxy as $P_USER - # and may not be able to write or delete the PID file. - echo "You aren't root, expect trouble!" - P_USER_SETTINGS="" -fi - -if [ ! -f $P_CONF_FILE ]; then - echo "Can't find $P_CONF_FILE, exiting." - exit 1 -fi - -case "$1" in - - start) - if [ -f $P_PIDFILE ]; then - if kill -0 `cat $P_PIDFILE`; then - echo "Error: $P_NAME is already running, exiting." - exit 1 - else - rm -f $P_PIDFILE - fi - fi - - $P_DAEMON --pidfile $P_PIDFILE $P_USER_SETTINGS $P_CONF_FILE 2>/dev/null - - if [ $? -eq 0 ]; then - echo "Starting $P_NAME, OK." - else - echo "Starting $P_NAME, Failed." - rm -f $P_PIDFILE - fi - ;; - - restart) - $0 stop - $0 start - ;; - - stop) - test ! -f $P_PIDFILE && echo "No $P_PIDFILE file found, exiting." && exit 1 - kill `cat $P_PIDFILE` && rm -f $P_PIDFILE && \ - echo "Stopping $P_NAME, OK." || echo "Stopping $P_NAME, failed." - ;; - - *) - echo "Usage: $0 {start|stop|restart}" - exit 1 - ;; - -esac - -exit 0 diff --git a/external/privoxy/privoxy-rh.spec b/external/privoxy/privoxy-rh.spec deleted file mode 100644 index 40c82b4..0000000 --- a/external/privoxy/privoxy-rh.spec +++ /dev/null @@ -1,1196 +0,0 @@ -# $Id: privoxy-rh.spec,v 1.63 2009/03/21 10:46:15 fabiankeil Exp $ -# -# Written by and Copyright (C) 2001-2006 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# - -# Defines should happen in the begining of the file -%define veryoldname junkbust -%define oldname junkbuster -%define privoxyconf %{_sysconfdir}/%{name} -%define privoxy_uid 73 -%define privoxy_gid 73 - -Name: privoxy -# ATTENTION -# Version and release should be updated accordingly on configure.in and -# configure. Otherwise, the package can be build with the wrong value -Version: 3.0.12 -Release: 1 -Summary: Privoxy - privacy enhancing proxy -License: GPL -Source0: http://dl.sf.net/ijbswa/%{name}-%{version}-stable-src.tar.gz -BuildRoot: %{_tmppath}/%{name}-%{version}-root -Group: System Environment/Daemons -URL: http://www.privoxy.org/ -Obsoletes: junkbuster-raw junkbuster-blank junkbuster -# Prereq: /usr/sbin/useradd , /sbin/chkconfig , /sbin/service -Prereq: shadow-utils, chkconfig, initscripts, sh-utils -BuildRequires: perl gzip sed libtool autoconf -Conflicts: junkbuster-raw junkbuster-blank junkbuster - -%description -Privoxy is a web proxy with advanced filtering capabilities for -protecting privacy, filtering web page data, managing cookies, -controlling access, and removing ads, banners, pop-ups and other -obnoxious Internet junk. Privoxy has a very flexible configuration and -can be customized to suit individual needs and tastes. Privoxy has application -for both stand-alone systems and multi-user networks. - -Privoxy is based on the Internet Junkbuster. - -%prep -#%setup -q -c -%setup -q -n "%{name}-%{version}-stable" - -%build - -# We check to see if versions match -VERSION_MAJOR=3 -VERSION_MINOR=0 -VERSION_POINT=12 - -# find CVS files and remove it. -find -name CVS | xargs rm -rf - -CONFIG_VERSION=`cat configure.in | sed -n -e 's/^VERSION_MAJOR=$[0-9]*$/\1./p' -e 's/^VERSION_MINOR=$[0-9]*$/\1./p' -e 's/^VERSION_POINT=$[0-9]*$/\1/p' | awk '{printf $1}'` -if [ "%{version}" != "${CONFIG_VERSION}" ]; then - echo "The version declared on the specfile does not match the version" - echo "declared on configure.in. This should not happen. The build will" - echo "be interrupted now, so you can fix it." - exit 1 -fi -autoheader -autoconf -%configure --disable-dynamic-pcre -make -# Docs are in CVS and tarball now. -#%%make dok - -## Explicitily stripping is not recomended. -## This is handled altomaticaly by RPM, and can couse troubles if -## anyone wants to build an unstriped version - morcego -#strip %{name} - -%install -[ "%{buildroot}" != "/" ] && rm -rf %{buildroot} -mkdir -p %{buildroot}%{_sbindir} \ - %{buildroot}%{_mandir}/man1 \ - %{buildroot}%{_localstatedir}/log/%{name} \ - %{buildroot}%{privoxyconf}/templates \ - %{buildroot}%{_sysconfdir}/logrotate.d \ - %{buildroot}%{_sysconfdir}/rc.d/init.d - -## Manual gziping of manpages should not be done, once it can -## break the building on some distributions. Anyway, rpm does it -## automagicaly these days -## Gziping the documentation files is not recomended - morcego -#gzip README AUTHORS ChangeLog %{name}.1 || /bin/true - -install -s -m 744 %{name} %{buildroot}%{_sbindir}/%{name} - -# Using sed to "convert" from DOS format to UNIX -# This is important behaviour, and should not be removed without some -# other assurance that these files don't get packed in the the -# wrong format -for i in `ls *.action` -do - cat $i | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/$i -done -cat default.filter | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/default.filter -cat user.filter | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/user.filter -cat trust | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/trust -( -cd templates -for i in `ls` -do - cat $i | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/templates/$i -done -) - -cp -f %{name}.1 %{buildroot}%{_mandir}/man1/%{name}.1 -cp -f %{name}.logrotate %{buildroot}%{_sysconfdir}/logrotate.d/%{name} -install -m 755 %{name}.init %{buildroot}%{_sysconfdir}/rc.d/init.d/%{name} -install -m 711 -d %{buildroot}%{_localstatedir}/log/%{name} - -# verify all file locations, etc. in the config file -# don't start with ^ or commented lines are not replaced -## Changing the sed paramter delimiter to @, so we don't have to -## escape the slashes -cat config | \ - sed 's@^confdir.*@confdir %{privoxyconf}@g' | \ -# sed 's/^permissionsfile.*/permissionsfile \/etc\/%{name}\/permissionsfile/g' | \ -# sed 's/^filterfile.*/default.filter \/etc\/%{name}\/default.filter/g' | \ -# sed 's/^logfile.*/logfile \%{_localstatedir}\/log\/%{name}\/logfile/g' | \ -# sed 's/^forward.*/forward \/etc\/%{name}\/forward/g' | \ -# sed 's/^aclfile.*/aclfile \/etc\/%{name}\/aclfile/g' > \ - sed 's@^logdir.*@logdir %{_localstatedir}/log/%{name}@g' | \ - sed 's@#user-manual http://www.privoxy.org/user-manual/@user-manual %{_docdir}/%{name}-%{version}/user-manual/@g' | \ - sed -e 's/[[:cntrl:]]*$//' > \ - %{buildroot}%{privoxyconf}/config -perl -pe 's/{-no-cookies}/{-no-cookies}\n\.redhat.com/' default.action >\ - %{buildroot}%{privoxyconf}/default.action - - -## Macros are expanded even on commentaries. So, we have to use %% -## -- morcego -#%%makeinstall - -%pre -# This is where we handle old usernames (junkbust and junkbuster) -# I'm not sure we should do that, but this is the way we have been -# doing it for some time now -- morcego -# We should do it for the group as well -- morcego -# Doing it by brute force. Much cleaner (no more Mr. Nice Guy) -- morcego - -# Same for username -usermod -u %{privoxy_uid} -g %{privoxy_gid} -l %{name} -d %{_sysconfdir}/%{name} -s "" %{oldname} > /dev/null 2>&1 || : -usermod -u %{privoxy_uid} -g %{privoxy_gid} -l %{name} -d %{_sysconfdir}/%{name} -s "" %{veryoldname} > /dev/null 2>&1 || : -userdel %{oldname} > /dev/null 2>&1 ||: -userdel %{veryoldname} > /dev/null 2>&1 ||: - -# Change the group name. Remove anything left behind. -groupmod -g %{privoxy_gid} -n %{name} %{oldname} > /dev/null 2>&1 ||: -groupmod -g %{privoxy_gid} -n %{name} %{veryoldname} > /dev/null 2>&1 ||: -groupdel %{oldname} > /dev/null 2>&1 ||: -groupdel %{veryoldname} > /dev/null 2>&1 ||: - -# Doublecheck to see if the group exist, and that it has the correct gid -/bin/grep -E '^%{name}:' %{_sysconfdir}/group > /dev/null 2>&1 -if [ $? -eq 1 ]; then - # Looks like it does not exist. Create it - groupadd -g %{privoxy_gid} %{name} > /dev/null 2>&1 -else - /bin/grep -E '^%{name}:[^:]*:%{privoxy_gid}:' %{_sysconfdir}/group > /dev/null 2>&1 - if [ $? -eq 1 ]; then - # The group exists, but does not have the correct gid - groupmod -g %{privoxy_gid} %{name} > /dev/null 2>&1 - fi -fi - -# Check to see if everything is okey. Create user if it still does not -# exist -id %{name} > /dev/null 2>&1 -if [ $? -eq 1 ]; then - %{_sbindir}/useradd -u %{privoxy_uid} -g %{privoxy_gid} -d %{_sysconfdir}/%{name} -r -s "" %{name} > /dev/null 2>&1 -fi - -# Double check that the group has the correct uid -P_UID=`id -u %{name} 2>/dev/null` -if [ $P_UID -ne %{privoxy_uid} ]; then - %{_sbindir}/usermod -u %{privoxy_uid} %{name} -fi - -# The same for the gid -P_GID=`id -g %{name} 2>/dev/null` -if [ $P_GID -ne %{privoxy_gid} ]; then - %{_sbindir}/usermod -g %{privoxy_gid} %{name} -fi - -%post -# for upgrade from 2.0.x -[ -f %{_localstatedir}/log/%{oldname}/logfile ] && { - mv -f %{_localstatedir}/log/%{oldname}/logfile %{_localstatedir}/log/%{name}/logfile ||: ; - chown -R %{name}:%{name} %{_localstatedir}/log/%{name} 2>/dev/null ||: ; -} -[ -f %{_localstatedir}/log/%{name}/%{name} ] && { - mv -f %{_localstatedir}/log/%{name}/%{name} %{_localstatedir}/log/%{name}/logfile ||: ; - chown -R %{name}:%{name} %{_sysconfdir}/%{name} 2>/dev/null ||: ; -} -/sbin/chkconfig --add privoxy -if [ "$1" = "1" ]; then - /sbin/service %{name} condrestart > /dev/null 2>&1 ||: -fi - -%preun -/sbin/service %{veryoldname} stop > /dev/null 2>&1 ||: -/sbin/service %{oldname} stop > /dev/null 2>&1 ||: - -if [ "$1" = "0" ]; then - /sbin/service %{name} stop > /dev/null 2>&1 ||: - /sbin/chkconfig --del privoxy -fi - -%postun -#if [ "$1" -ge "1" ]; then -# /sbin/service %{name} condrestart > /dev/null 2>&1 -#fi -# We only remove it we this is not an upgrade -if [ "$1" = "0" ]; then - id privoxy > /dev/null 2>&1 && %{_sbindir}/userdel privoxy || /bin/true - /bin/grep -E '^%{name}:' %{_sysconfdir}/group > /dev/null && %{_sbindir}/groupdel %{name} || /bin/true -fi - -%clean -[ "%{buildroot}" != "/" ] && rm -rf %{buildroot} - -%files -%defattr(0644,root,root,0755) -%doc README AUTHORS ChangeLog LICENSE -#%doc doc/text/developer-manual.txt doc/text/user-manual.txt doc/text/faq.txt -%doc doc/webserver/developer-manual -%doc doc/webserver/user-manual -%doc doc/webserver/faq -%doc doc/webserver/p_doc.css doc/webserver/privoxy-index.html -%doc doc/webserver/images -%doc doc/webserver/man-page - -# ATTENTION FOR defattr change here ! -%defattr(0644,%{name},%{name},0755) - -%dir %{privoxyconf} -%dir %{privoxyconf}/templates -%dir %{_localstatedir}/log/%{name} - -%attr(0744,%{name},%{name})%{_sbindir}/%{name} - -# WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! -# We should not use wildchars here. This could mask missing files problems -# -- morcego -# WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! -%config(noreplace) %{privoxyconf}/config -%config(noreplace) %{privoxyconf}/user.action -%config %{privoxyconf}/match-all.action -%config %{privoxyconf}/default.action -%config %{privoxyconf}/default.filter -%config %{privoxyconf}/regression-tests.action -%config(noreplace) %{privoxyconf}/user.filter -%config(noreplace) %{privoxyconf}/trust - -# Please keep these alphabetized so its easier to find one that -# is not included. -%config %{privoxyconf}/templates/blocked -%config %{privoxyconf}/templates/cgi-error-404 -%config %{privoxyconf}/templates/cgi-error-bad-param -%config %{privoxyconf}/templates/cgi-error-disabled -%config %{privoxyconf}/templates/cgi-error-file -%config %{privoxyconf}/templates/cgi-error-file-read-only -%config %{privoxyconf}/templates/cgi-error-modified -%config %{privoxyconf}/templates/cgi-error-parse -%config %{privoxyconf}/templates/cgi-style.css -%config %{privoxyconf}/templates/connect-failed -%config %{privoxyconf}/templates/default -%config %{privoxyconf}/templates/forwarding-failed -%config %{privoxyconf}/templates/edit-actions-add-url-form -%config %{privoxyconf}/templates/edit-actions-for-url -%config %{privoxyconf}/templates/edit-actions-for-url-filter -%config %{privoxyconf}/templates/edit-actions-list -%config %{privoxyconf}/templates/edit-actions-list-button -%config %{privoxyconf}/templates/edit-actions-list-section -%config %{privoxyconf}/templates/edit-actions-list-url -%config %{privoxyconf}/templates/edit-actions-remove-url-form -%config %{privoxyconf}/templates/edit-actions-url-form -%config %{privoxyconf}/templates/mod-local-help -%config %{privoxyconf}/templates/mod-support-and-service -%config %{privoxyconf}/templates/mod-title -%config %{privoxyconf}/templates/mod-unstable-warning -%config %{privoxyconf}/templates/no-such-domain -%config %{privoxyconf}/templates/show-request -%config %{privoxyconf}/templates/show-status -%config %{privoxyconf}/templates/show-status-file -%config %{privoxyconf}/templates/show-url-info -%config %{privoxyconf}/templates/show-version -%config %{privoxyconf}/templates/toggle -%config %{privoxyconf}/templates/toggle-mini -%config %{privoxyconf}/templates/untrusted -%config %{privoxyconf}/templates/url-info-osd.xml - -# Attention, new defattr change here ! -%defattr(0644,root,root,0755) - -%config(noreplace) %{_sysconfdir}/logrotate.d/%{name} -%config(noreplace) %attr(0755,root,root) %{_sysconfdir}/rc.d/init.d/%{name} - -%{_mandir}/man1/%{name}.* - -%changelog -* Sat Jun 18 2008 Hal Burgiss <hal(a)foobox.net> -- Remove reference to txt docs. - -* Sat Oct 18 2006 Hal Burgiss <hal(a)foobox.net> -- Bump version to 3.0.6 - -* Sat Sep 23 2006 Jochen Schlick <j.schlick_at_decagon_de> 3.0.5-1 -- let user-manual point to local documentation - -* Thu Sep 21 2006 Hal Burgiss <hal(a)foobox.net> -- Fix user.filter install section and clean up CVS cruft in tarball. - -* Wed Sep 20 2006 Hal Burgiss <hal(a)foobox.net> -- Bump version to 3.0.5 - -* Fri Sep 08 2006 Hal Burgiss <hal(a)foobox.net> -- Bump version to 3.0.4 - -* Sat Sep 02 2006 Hal Burgiss <hal(a)foobox.net> -- Include new file, user.filter. Do not overwrite "trust" file - (does anyone use this?). - -* Wed Mar 26 2003 Andreas Oesterhelt <andreas(a)oesterhelt.org> -- Bump version for 3.0.2. - -* Wed Mar 19 2003 Hal Burgiss <hal(a)foobox.net> -- Bump version for 3.0.1. - -* Tue Aug 25 2002 Hal Burgiss <hal(a)foobox.net> -- Bump version for 3.0.0 :) - -* Tue Aug 06 2002 Hal Burgiss <hal(a)foobox.net> -- Reset version for 2.9.20. - -* Tue Jul 30 2002 Hal Burgiss <hal(a)foobox.net> -- Reset version for 2.9.18. - -* Sat Jul 27 2002 Hal Burgiss <hal(a)foobox.net> -- Reset version and release for 2.9.16. - -* Fri Jul 12 2002 Karsten Hopp <karsten(a)redhat.de> -- don't use ghost files for rcX.d/*, using chkconfig is the - correct way to do this job (#68619) - -* Fri Jul 05 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.15-8 -- Changing delete order for groups and users (users should be first) - -* Wed Jul 03 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.15-7 -- Changing sed expression that removed CR from the end of the lines. This - new one removes any control caracter, and should work with older versions - of sed - -* Tue Jul 02 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.15-6 -- Fixing defattr values. File and directory modes where swapped - -* Tue Jul 02 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.15-5 -- Bumping Release number (which should be changed every time the specfile - is) - -* Tue Jul 02 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-4 -- Fix typo in templates creation. - -* Wed Jun 26 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.15-4 -- Fixing issues created by specfile sync between branches - - Correcting the release number (WARNING) - - Reintroducing text file conversion (dos -> unix) - - Reconverting hardcoded directories to macros - - Refixing ownership of privoxy files (now using multiple defattr - definitions) - -* Thu Jun 20 2002 Karsten Hopp <karsten(a)redhat.de> -- fix several .spec file issues to shut up rpmlint - - non-standard-dir-perm /var/log/privoxy 0744 - - invalid-vendor Privoxy.Org (This is ok for binaries compiled by privoxy - members, but not for packages from Red Hat) - - non-standard-group Networking/Utilities - - logrotate and init scripts should be noreplace - -* Mon May 27 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Index.html is now privoxy-index.html for doc usage. - -* Sat May 25 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Add html man page so index.html does not 404. - -* Fri May 24 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Add another template and alphabetize these for easier tracking. -- Add doc/images directory. - -* Wed May 15 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Add templates/edit-actions-list-button - -* Fri May 03 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.15-1 -- Version bump -- Adding noreplace for %%{privoxyconf}/config -- Included a method to verify if the versions declared on the specfile and - configure.in match. Interrupt the build if they don't. - -* Fri Apr 26 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.14-3 -- Changing Vendor to Privoxy.Org - -* Tue Apr 23 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.14-2 -- Adjust for new *actions files. - -* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.14-2 -- Removed the redhat hack that prevented the user and group from - being dealocated. That was a misundestanding of my part regarding - redhat policy. - -* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.14-2 -- Using macros to define uid and gid values -- Bumping release - -* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.14-1 -- Changes to fixate the uid and gid values as (both) 73. This is a - value we hope to standarize for all distributions. RedHat already - uses it, and Conectiva should start as soon as I find where the heck - I left my cluebat :-) -- Only remove the user and group on uninstall if this is not redhat, once - redhat likes to have the values allocated even if the package is not - installed - -* Tue Apr 16 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-6 -- Add --disable-dynamic-pcre to configure. - -* Wed Apr 10 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.13-5 -- Relisting template files on the %%files section - -* Tue Apr 09 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-4 -- Removed 'make dok'. Docs are all maintained in CVS (and tarball) now. - -* Mon Apr 08 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-4 -- Add templates/cgi-style.css, faq.txt, p_web.css, LICENSE -- Remove templates/blocked-compact. -- Add more docbook stuff to Builderquires. - -* Thu Mar 28 2002 Sarantis Paskalis <sarantis(a)cnl.di.uoa.gr> -+ privoxy-2.9.13-3 -- Include correct documentation file. - -* Tue Mar 26 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-3 -- Fix typo in Description. - -* Tue Mar 26 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.13-3 -- Added commentary asking to update the release value on the configure - script - -* Tue Mar 25 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-3 -- Added the missing edit-actions-for-url-filter to templates. - -* Mon Mar 25 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-2.9.13-2 -- Fixing Release number - -* Sun Mar 24 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-2 -- Added faq to docs. - -* Sun Mar 24 2002 Rodrigo Barbosa <rodrigob(a)suespammers.org> -+ privoxy-2.9.13-2 -- Fixed the init files entries. Now we use %%ghost -- improved username (and groupname) handling on the %%pre section. By improved - I mean: we do it by brute force now. Much easier to maintain. Yeah, you - got it right. No more Mr. Nice Guy. -- Removed the userdel call on %%post. No need, once it's complety handled on - the %%pre section - -* Sun Mar 24 2002 Hal Burgiss <hal(a)foobox.net> -+ junkbusterng-2.9.13-1 - Added autoheader. Added autoconf to buildrequires. - -* Sun Mar 24 2002 Hal Burgiss <hal(a)foobox.net> -+ junkbusterng-2.9.13-1 -- Fixed build problems re: name conflicts with man page and logrotate. -- Commented out rc?d/* configs for time being, which are causing a build -- failure. /etc/junkbuster is now /etc/privoxy. Stefan did other name -- changes. Fixed typo ';' should be ':' causing 'rpm -e' to fail. - -* Fri Mar 22 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ junkbusterng-2.9.13-1 -- References to the expression ijb where changed where possible -- New package name: junkbusterng (all in lower case, acording to - the LSB recomendation) -- Version changed to: 2.9.13 -- Release: 1 -- Added: junkbuster to obsoletes and conflicts (Not sure this is - right. If it obsoletes, why conflict ? Have to check it later) -- Summary changed: Stefan, please check and aprove it -- Changes description to use the new name -- Sed string was NOT changed. Have to wait to the manpage to - change first -- Keeping the user junkbuster for now. It will require some aditional - changes on the script (scheduled for the next specfile release) -- Added post entry to move the old logfile to the new log directory -- Removing "chkconfig --add" entry (not good to have it automaticaly - added to the startup list). -- Added preun section to stop the service with the old name, as well - as remove it from the startup list -- Removed the chkconfig --del entry from the conditional block on - the preun scriptlet (now handled on the %files section) - -* Thu Mar 21 2002 Hal Burgiss <hal(a)foobox.net> -- added ijb_docs.css to docs. - -* Mon Mar 11 2002 Hal Burgiss <hal(a)foobox.net> -+ junkbuster-2.9.11-8 -- Take out --enable-no-gifs, breaks some browsers. - -* Sun Mar 10 2002 Hal Burgiss <hal(a)foobox.net> -+ junkbuster-2.9.11-8 -- Add --enable-no-gifs to configure. - -* Fri Mar 08 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ junkbuster-2.9.11-7 -- Added BuildRequires to libtool. - -* Tue Mar 06 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ junkbuster-2.9.11-6 -- Changed the routined that handle the junkbust and junkbuster users on - %%pre and %%post to work in a smoother manner -- %%files now uses hardcoded usernames, to avoid problems with package - name changes in the future - -* Tue Mar 05 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ junkbuster-2.9.11-5 -- Added "make redhat-dok" to the build process -- Added docbook-utils to BuildRequires - -* Tue Mar 05 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ junkbuster-2.9.11-4 -- Changing man section in the manpage from 1 to 8 -- We now require packages, not files, to avoid issues with apt - -* Mon Mar 04 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ junkbuster-2.9.11-3 -- Fixing permissions of the init script - -* Mon Mar 04 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ junkbuster-2.9.11-2 -- General specfile fixup, using the best recomended practices, including: - - Adding -q to %%setup - - Using macros whereever possible - - Not using wildchars on %%files section - - Doubling the percentage char on changelog and comments, to - avoid rpm expanding them - -* Sun Mar 03 2002 Hal Burgiss <hal(a)foobox.net> -- /bin/false for shell causes init script to fail. Reverting. - -* Wed Jan 09 2002 Hal Burgiss <hal(a)foobox.net> -- Removed UID 73. Included user-manual and developer-manual in docs. - Include other actions files. Default shell is now /bin/false. - Userdel user=junkbust. ChangeLog was not zipped. Removed - RPM_OPT_FLAGS kludge. - -* Fri Dec 28 2001 Thomas Steudten <thomas(a)steudten.ch> -- add paranoia check for 'rm -rf %%{buildroot}' -- add gzip to 'BuildRequires' - -* Sat Dec 1 2001 Hal Burgiss <hal(a)foobox.net> -- actionsfile is now ijb.action. - -* Tue Nov 6 2001 Thomas Steudten <thomas(a)steudten.ch> -- Compress manpage -- Add more documents for installation -- Add version string to name and source - -* Wed Oct 24 2001 Hal Burigss <hal(a)foobox.net> -- Back to user 'junkbuster' and fix configure macro. - -* Wed Oct 10 2001 Hal Burigss <hal(a)foobox.net> -- More changes for user 'junkbust'. Init script had 'junkbuster'. - -* Sun Sep 23 2001 Hal Burgiss <hal(a)foobox.net> -- Change of $RPM_OPT_FLAGS handling. Added new HTML doc files. -- Changed owner of /etc/junkbuster to shut up PAM/xauth log noise. - -* Thu Sep 13 2001 Hal Burgiss <hal(a)foobox.net> -- Added $RPM_OPT_FLAGS support, renaming of old logfile, and -- made sure no default shell exists for user junkbust. - -* Sun Jun 3 2001 Stefan Waldherr <stefan(a)waldherr.org> -- rework of RPM - -* Mon Sep 25 2000 Stefan Waldherr <stefan(a)waldherr.org> -- CLF Logging patch by davep(a)cyw.uklinux.net -- Hal DeVore <haldevore(a)earthling.net> fix akamaitech in blocklist - -* Sun Sep 17 2000 Stefan Waldherr <stefan(a)waldherr.org> -- Steve Kemp skx(a)tardis.ed.ac.uk's javascript popup patch. -- Markus Breitenbach breitenb(a)rbg.informatik.tu-darmstadt.de supplied - numerous fixes and enhancements for Steve's patch. -- adamlock(a)netscape.com (Adam Lock) in the windows version: - - Taskbar activity spinner always spins even when logging is - turned off (which is the default) - people who don't - like the spinner can turn it off from a menu option. - - Taskbar popup menu has a options submenu - people can now - open the settings files for cookies, blockers etc. - without opening the JB window. - - Logging functionality works again - - Buffer overflow is fixed - new code uses a bigger buffer - and snprintf so it shouldn't overflow anymore. -- Fixed userid swa, group learning problem while installing. - root must build RPM. -- Added patch by Benjamin Low <ben(a)snrc.uow.edu.au> that prevents JB to - core dump when there is no log file. -- Tweaked SuSE startup with the help of mohataj(a)gmx.net and Doc.B(a)gmx.de. -- Fixed man page to include imagefile and popupfile. -- Sanity check for the statistics function added. -- "Patrick D'Cruze" <pdcruze(a)orac.iinet.net.au>: It seems Microsoft - are transitioning Hotmail from FreeBSD/Apache to Windows 2000/IIS. - With IIS/5, it appears to omit the trailing \r\n from http header - only messages. eg, when I visit http://www.hotmail.com, IIS/5 - responds with a HTTP 302 redirect header. However, this header - message is missing the trailing \r\n. IIS/5 then closes the - connection. Junkbuster, unfortunately, discards the header becomes - it thinks it is incomplete - and it is. MS have transmitted an - incomplete header! -- Added bug reports and patch submission forms in the docs. - -* Mon Mar 20 2000 Stefan Waldherr <stefan(a)waldherr.org> - Andrew <anw(a)tirana.freewire.co.uk> extended the JB: - Display of statistics of the total number of requests and the number - of requests filtered by junkbuster, also the percentage of requests - filtered. Suppression of the listing of files on the proxy-args page. - All stuff optional and configurable. - -* Sun Sep 12 1999 Stefan Waldherr <stefan(a)waldherr.org> - Jan Willamowius (jan(a)janhh.shnet.org) fixed a bug in the - code which prevented the JB from handling URLs of the form - user:password@www.foo.com. Fixed. - -* Mon Aug 2 1999 Stefan Waldherr <stefan(a)waldherr.org> - Blank images are no longer cached, thanks to a hint from Markus - Breitenbach <breitenb(a)rbg.informatik.tu-darmstadt.de>. The user - agent is NO longer set by the Junkbuster. Sadly, many sites depend - on the correct browser version nowadays. Incorporated many - suggestions from Jan "Yenya" Kasprzak <kas(a)fi.muni.cz> for the - spec file. Fixed logging problem and since runlevel 2 does not - use networking, I replaced /etc/rc.d/rc2.d/S84junkbuster with - /etc/rc.d/rc2.d/K09junkbuster thanks to Shaw Walker - <walker(a)netgate.net>. You should now be able to build this RPM as - a non-root user (mathias(a)weidner.sem.lipsia.de) - -* Sun Jan 31 1999 Stefan Waldherr <stefan(a)waldherr.org> - %%{_localstatedir}/log/junkbuster set to nobody. Added /etc/junkbuster/imagelist - to allow more sophisticated matching of blocked images. Logrotate - logfile. Added files for auto-updating the blocklist et al. - -* Wed Dec 16 1998 Stefan Waldherr <stefan(a)waldherr.org> - Configure blank version via config file. No separate blank - version anymore. Added Roland's <roland(a)spinnaker.rhein.de> - patch to show a logo instead of a blank area. Added a suggestion - from Alex <alex(a)cocoa.demon.co.uk>: %%{_localstatedir}/lock/subsys/junkbuster. - More regexps in the blocklist. Prepared the forwardfile for - squid. Extended image regexp with help from gabriel - <somlo(a)CS.ColoState.EDU>. - -* Thu Nov 19 1998 Stefan Waldherr <stefan(a)waldherr.org> - All RPMs now identify themselves in the show-proxy-args page. - Released Windoze version. Run junkbuster as nobody instead of - root. - -* Fri Oct 30 1998 Stefan Waldherr <stefan(a)waldherr.org> - Newest version. First release (hence the little version number - mixture -- 2.0.2-0 instead of 2.0-7). This version tightens - security over 2.0.1; some multi-user sites will need to change - the listen-address in the configuration file. The blank version of - the Internet Junkbuster has a more sophisticated way of replacing - images. All RPMs identify themselves in the show-proxy-args page. - -* Thu Sep 23 1998 Stefan Waldherr <stefan(a)waldherr.org> - Modified the blocking feature, so that only GIFs and JPEGs are - blocked and replaced but not HTML pages. Thanks to - "Gerd Flender" <plgerd(a)informatik.uni-siegen.de> for this nice - idea. Added numerous stuff to the blocklist. Keep patches in - seperate files and no longer in diffs (easier to maintain). - -* Tue Jun 16 1998 Stefan Waldherr <swa(a)cs.cmu.edu> - Moved config files to /etc/junkbuster directory, moved man page, - added BuildRoot directive (Thanks to Alexey Nogin <ayn2(a)cornell.edu>) - Made new version junkbuster-raw (which is only a stripped version of - the junkuster rpm, i.e. without my blocklist, etc.) - -* Tue Jun 16 1998 (2.0-1) - Uhm, not that much. Just a new junkbuster version that - fixes a couple of bugs ... and of course a bigger - blocklist with the unique Now-less-ads-than-ever(SM) - feature. - Oh, one thing: I changed the default user agent to Linux -- no - need anymore to support Apple. - -* Tue Jun 16 1998 (2.0-0) - Now-less-ads-than-ever (SM) - compiled with gcc instead of cc - compiled with -O3, thus it should be a little faster - show-proxy-args now works - /etc/junkbuster.init wasn't necessary - -* Tue Jun 16 1998 (1.4) - some more config files were put into /etc - The junkbuster-blank rpm returns a 1x1 pixel image, that gets - displayed by Netscape instead of the blocked image. - Read http://www.waldherr.org/junkbuster/ for - further info. - -* Tue Jun 16 1998 (1.3) - The program has been moved to /usr/sbin (from /usr/local/bin) - Init- and stopscripts (/etc/rc.d/rc*) have been added so - that the junkbuster starts automatically during bootup. - The /etc/blocklist file is much more sophisticated. Theoretically - one should e.g. browse all major US and German newspapers without - seeing one annoying ad. - junkbuster.init was modified. It now starts junkbuster with an - additional "-r @" flag. - -# $Log: privoxy-rh.spec,v $ -# Revision 1.63 2009/03/21 10:46:15 fabiankeil -# Bump version to 3.0.12. -# -# Revision 1.62 2009/02/15 17:17:23 fabiankeil -# - Bump version to 3.0.11. -# - List match-all.action as %config file. -# -# Revision 1.61 2009/01/13 16:47:34 fabiankeil -# The standard.action file is gone. -# -# Revision 1.60 2008/08/30 12:46:49 fabiankeil -# The jarfile directive is gone. Update accordingly. -# -# Revision 1.59 2008/08/13 16:57:46 fabiankeil -# Change version to 3.0.10. -# -# Revision 1.58 2008/06/19 01:52:17 hal9 -# Remove txt docs from spec file. -# -# Revision 1.57 2008/05/30 15:06:42 fabiankeil -# - Add %config directive for url-info-osd.xml. -# As usual, this hasn't been tested. -# - Fix comment typo. -# -# Revision 1.56 2008/03/16 14:17:25 fabiankeil -# Add %config lines for regression-tests.action and forwarding-failed. -# This might or might not help with #1915185, reported by Bernardo Bacic. -# -# Revision 1.55 2008/03/02 17:36:43 fabiankeil -# Set version to 3.0.9. -# -# Revision 1.54 2008/01/20 14:30:59 fabiankeil -# Set version to 3.0.8. -# -# Revision 1.53 2006/11/28 11:34:35 hal9 -# Fix the prep section per Support request so it actually builds. -# -# Revision 1.52 2006/11/18 17:36:53 hal9 -# Ooops, bumping version to 3.0.6 -# -# Revision 1.51 2006/11/18 14:37:12 fabiankeil -# Bump version to 3.0.6. -# -# Revision 1.50 2006/09/24 01:19:03 hal9 -# Add changes for user-manual directive by nfopd submitted via SF. -# -# Revision 1.49 2006/09/22 01:02:08 hal9 -# Fix user.filter installation and CVS files cruft per support request. -# -# Revision 1.48 2006/09/20 23:51:26 hal9 -# Bump versions to 3.0.5 -# -# Revision 1.47 2006/09/09 00:35:10 hal9 -# Bumped versions to 3.0.4. Both files should be checked further. -# -# Revision 1.46 2006/09/02 22:22:59 hal9 -# Include user.filter, and do not overwrite trust file on updates. -# -# Revision 1.45 2006/07/18 14:48:47 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.33.2.22 2004/01/30 17:09:29 oes -# Bumped version for 3.0.3 -# -# Revision 1.33.2.21 2003/03/26 00:25:00 oes -# Bump version for 3.0.2 -# -# Revision 1.33.2.20 2003/03/20 03:27:11 hal9 -# Bump version for 3.0.1 pending release. -# -# Revision 1.33.2.19 2002/08/25 23:36:03 hal9 -# Bump version for 3.0.0. -# -# Revision 1.33.2.18 2002/08/10 11:28:50 oes -# Bumped version -# -# Revision 1.33.2.17 2002/08/07 01:08:49 hal9 -# Bumped version to 2.9.18. -# -# Revision 1.33.2.16 2002/08/05 08:42:13 kick_ -# same permissions, same runlevels as all the other initscripts -# -# Revision 1.33.2.15 2002/07/30 21:51:19 hal9 -# Bump version to 2.9.17. -# -# Revision 1.33.2.14 2002/07/27 21:58:16 kick_ -# bump version -# -# Revision 1.33.2.13 2002/07/27 21:39:41 kick_ -# condrestart raised an error during an fresh install when privoxy wasn't already running -# -# Revision 1.33.2.12 2002/07/27 15:47:10 hal9 -# Reset version and release for 2.9.16. -# -# Revision 1.33.2.11 2002/07/25 09:47:57 kick_ -# this caused some errors during a fresh installation. It's unnecessary to call an extra program (/bin/true) to set the error code to 0 -# -# Revision 1.33.2.10 2002/07/12 09:14:26 kick_ -# don't use ghost files for rcX.d/*, chkconfig is available to do this job. Enable translation of error messge -# -# Revision 1.33.2.9 2002/07/05 17:16:19 morcego -# - Changing delete order for groups and users (users should be first) -# -# Revision 1.33.2.8 2002/07/03 20:46:24 morcego -# - Changing sed expression that removed CR from the end of the lines. This -# new one removes any control caracter, and should work with older versions -# of sed -# -# Revision 1.33.2.7 2002/07/02 18:16:48 morcego -# - Fixing defattr values. File and directory modes where swapped -# -# Revision 1.33.2.6 2002/07/02 17:38:10 morcego -# Bumping Release number -# -# Revision 1.33.2.5 2002/07/02 11:43:20 hal9 -# Fix typo in templates creation. -# -# Revision 1.33.2.4 2002/06/26 17:32:45 morcego -# Integrating fixed from the main branch. -# -# Revision 1.33.2.3 2002/06/24 12:13:34 kick_ -# shut up rpmlint. btw: The vendor tag should be set in you .rpmmacros file, not in the spec file! -# -# Revision 1.33.2.2 2002/05/28 02:39:38 hal9 -# Replace index.html with privoxy-index.html for docs. -# -# Revision 1.33.2.1 2002/05/26 17:20:23 hal9 -# Add images to doc dirs. -# -# Revision 1.33 2002/05/25 02:08:23 hal9 -# Add doc/images directory. -# Redhat: alphabetized list of templates (and I think added one in the process) -# -# Revision 1.32 2002/05/16 01:37:29 hal9 -# Add new template file so CGI stuff works :) -# -# Revision 1.31 2002/05/03 17:14:35 morcego -# *.spec: Version bump to 2.9.15 -# -rh.spec: noreplace for %%{privoxyconf}/config -# Will interrupt the build if versions from configure.in and -# specfile do not match -# -# Revision 1.30 2002/04/26 15:51:05 morcego -# Changing Vendor value to Privoxy.Org -# -# Revision 1.29 2002/04/24 03:13:51 hal9 -# New actions files changes. -# -# Revision 1.28 2002/04/22 18:51:33 morcego -# user and group now get removed on rh too. -# -# Revision 1.27 2002/04/22 16:32:31 morcego -# configure.in, *.spec: Bumping release to 2 (2.9.14-2) -# -rh.spec: uid and gid are now macros -# -suse.spec: Changing the header Copyright to License (Copyright is -# deprecable) -# -# Revision 1.26 2002/04/22 16:24:36 morcego -# - Changes to fixate the uid and gid values as (both) 73. This is a -# value we hope to standarize for all distributions. RedHat already -# uses it, and Conectiva should start as soon as I find where the heck -# I left my cluebat :-) -# - Only remove the user and group on uninstall if this is not redhat, once -# redhat likes to have the values allocated even if the package is not -# installed -# -# Revision 1.25 2002/04/17 01:59:12 hal9 -# Add --disable-dynamic-pcre. -# -# Revision 1.24 2002/04/11 10:09:20 oes -# Version 2.9.14 -# -# Revision 1.23 2002/04/10 18:14:45 morcego -# - (privoxy-rh.spec only) Relisting template files on the %%files section -# - (configure.in, privoxy-rh.spec) Bumped package release to 5 -# -# Revision 1.22 2002/04/09 22:06:12 hal9 -# Remove 'make dok'. -# -# Revision 1.21 2002/04/09 02:52:26 hal9 -# - Add templates/cgi-style.css, faq.txt, p_web.css, LICENSE -# - Remove templates/blocked-compact. -# - Add more docbook stuff to Buildrequires. -# -# Revision 1.20 2002/04/08 20:27:45 swa -# fixed JB spelling -# -# Revision 1.19 2002/03/27 22:44:59 sarantis -# Include correct documentation file. -# -# Revision 1.18 2002/03/27 22:10:14 sarantis -# bumped Hal's last commit 1 day to the future to make rpm build again. -# -# Revision 1.17 2002/03/27 00:48:23 hal9 -# Fix up descrition. -# -# Revision 1.16 2002/03/26 22:29:55 swa -# we have a new homepage! -# -# Revision 1.15 2002/03/26 17:39:54 morcego -# Adding comment on the specfile to remember the packager to update -# the release number on the configure script -# -# Revision 1.14 2002/03/26 14:25:15 hal9 -# Added edit-actions-for-url-filter to templates in %%config -# -# Revision 1.13 2002/03/25 13:31:04 morcego -# Bumping Release tag. -# -# Revision 1.12 2002/03/25 03:11:40 hal9 -# Do it right way this time :/ -# -# Revision 1.11 2002/03/25 03:09:51 hal9 -# Added faq to docs. -# -# Revision 1.10 2002/03/24 22:16:14 morcego -# Just removing some old commentaries. -# -# Revision 1.9 2002/03/24 22:03:22 morcego -# Should be working now. See %changelog for details -# -# Revision 1.8 2002/03/24 21:13:01 morcego -# Tis broken. -# -# Revision 1.7 2002/03/24 21:07:18 hal9 -# Add autoheader, etc. -# -# Revision 1.6 2002/03/24 19:56:40 hal9 -# /etc/junkbuster is now /etc/privoxy. Fixed ';' typo. -# -# Revision 1.4 2002/03/24 13:32:42 swa -# name change related issues -# -# Revision 1.3 2002/03/24 12:56:21 swa -# name change related issues. -# -# Revision 1.2 2002/03/24 11:40:14 swa -# name change -# -# Revision 1.1 2002/03/24 11:23:44 swa -# name change -# -# Revision 1.1 2002/03/22 20:53:03 morcego -# - Ongoing process to change name to JunkbusterNG -# - configure/configure.in: no change needed -# - GNUmakefile.in: -# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz -# - PROGRAM = jbng@EXEEXT@ -# - rh-spec now references as junkbusterng-rh.spec -# - redhat-upload: references changed to junkbusterng-* (package names) -# - tarball-dist: references changed to JunkbusterNG-distribution-* -# - tarball-src: now JunkbusterNG-* -# - install: initscript now junkbusterng.init and junkbusterng (when -# installed) -# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec -# - junkbusterng.spec: -# - References to the expression ijb where changed where possible -# - New package name: junkbusterng (all in lower case, acording to -# the LSB recomendation) -# - Version changed to: 2.9.13 -# - Release: 1 -# - Added: junkbuster to obsoletes and conflicts (Not sure this is -# right. If it obsoletes, why conflict ? Have to check it later) -# - Summary changed: Stefan, please check and aprove it -# - Changes description to use the new name -# - Sed string was NOT changed. Have to wait to the manpage to -# change first -# - Keeping the user junkbuster for now. It will require some aditional -# changes on the script (scheduled for the next specfile release) -# - Added post entry to move the old logfile to the new log directory -# - Removing "chkconfig --add" entry (not good to have it automaticaly -# added to the startup list). -# - Added preun section to stop the service with the old name, as well -# as remove it from the startup list -# - Removed the chkconfig --del entry from the conditional block on -# the preun scriptlet (now handled on the %files section) -# - junkbuster.init: renamed to junkbusterng.init -# - junkbusterng.init: -# - Changed JB_BIN to jbng -# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to -# be used where necessary (config dir) -# -# Aditional notes: -# - The config directory is /etc/junkbuster yet. Have to change it on the -# specfile, after it is changes on the code -# - The only files that got renamed on the cvs tree were the rh specfile and -# the init file. Some file references got changes on the makefile and on the -# rh-spec (as listed above) -# -# Revision 1.43 2002/03/21 16:04:10 hal9 -# added ijb_docs.css to %doc -# -# Revision 1.42 2002/03/12 13:41:18 sarantis -# remove hard-coded "ijbswa" string in build phase -# -# Revision 1.41 2002/03/11 22:58:32 hal9 -# Remove --enable-no-gifs -# -# Revision 1.39 2002/03/08 18:57:29 swa -# remove user junkbuster after de-installation. -# -# Revision 1.38 2002/03/08 13:45:27 morcego -# Adding libtool to Buildrequires -# -# Revision 1.37 2002/03/07 19:23:49 swa -# i hate to scroll. suse: wrong configdir. -# -# Revision 1.36 2002/03/07 05:06:54 morcego -# Fixed %pre scriptlet. And, as a bonus, you can even understand it now. :-) -# -# Revision 1.34 2002/03/07 00:11:57 morcego -# Few changes on the %pre and %post sections of the rh specfile to handle -# usernames more cleanly -# -# Revision 1.33 2002/03/05 13:13:57 morcego -# - Added "make redhat-dok" to the build phase -# - Added docbook-utils to BuildRequires -# -# Revision 1.32 2002/03/05 12:34:24 morcego -# - Changing section internaly on the manpage from 1 to 8 -# - We now require packages, not files, to avoid issues with apt -# -# Revision 1.31 2002/03/04 18:06:09 morcego -# SPECFILE: fixing permissing of the init script (broken by the last change) -# -# Revision 1.30 2002/03/04 16:18:03 morcego -# General cleanup of the rh specfile. -# -# %changelog -# * Mon Mar 04 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -# + junkbuster-2.9.11-2 -# - General specfile fixup, using the best recomended practices, including: -# - Adding -q to %%setup -# - Using macros whereever possible -# - Not using wildchars on %%files section -# - Doubling the percentage char on changelog and comments, to -# avoid rpm expanding them -# -# Revision 1.29 2002/03/03 19:21:22 hal9 -# Init script fails if shell is /bin/false. -# -# Revision 1.28 2002/01/09 18:34:03 hal9 -# nit. -# -# Revision 1.27 2002/01/09 18:32:02 hal9 -# Removed RPM_OPT_FLAGS kludge. -# -# Revision 1.26 2002/01/09 18:21:10 hal9 -# A few minor updates. -# -# Revision 1.25 2001/12/28 01:45:36 steudten -# Add paranoia check and BuildReq: gzip -# -# Revision 1.24 2001/12/01 21:43:14 hal9 -# Allowed for new ijb.action file. -# -# Revision 1.23 2001/11/06 12:09:03 steudten -# Compress doc files. Install README and AUTHORS at last as document. -# -# Revision 1.22 2001/11/05 21:37:34 steudten -# Fix to include the actual version for name. -# Let the 'real' packager be included - sorry stefan. -# -# Revision 1.21 2001/10/31 19:27:27 swa -# consistent description. new name for suse since -# we had troubles with rpms of identical names -# on the webserver. -# -# Revision 1.20 2001/10/24 15:45:49 hal9 -# To keep Thomas happy (aka correcting my mistakes) -# -# Revision 1.19 2001/10/15 03:23:59 hal9 -# Nits. -# -# Revision 1.17 2001/10/10 18:59:28 hal9 -# Minor change for init script. -# -# Revision 1.16 2001/09/24 20:56:23 hal9 -# Minor changes. -# -# Revision 1.13 2001/09/10 17:44:43 swa -# integrate three pieces of documentation. needs work. -# will not build cleanly under redhat. -# -# Revision 1.12 2001/09/10 16:25:04 swa -# copy all templates. version updated. -# -# Revision 1.11 2001/07/03 11:00:25 sarantis -# replaced permissionsfile with actionsfile -# -# Revision 1.10 2001/07/03 09:34:44 sarantis -# bumped up version number. -# -# Revision 1.9 2001/06/12 18:15:29 swa -# the %% in front of configure (see tag below) confused -# the rpm build process on 7.1. -# -# Revision 1.8 2001/06/12 17:15:56 swa -# fixes, because a clean build on rh6.1 was impossible. -# GZIP confuses make, %% configure confuses rpm, etc. -# -# Revision 1.7 2001/06/11 12:17:26 sarantis -# fix typo in %%post -# -# Revision 1.6 2001/06/11 11:28:25 sarantis -# Further optimizations and adaptations in the spec file. -# -# Revision 1.5 2001/06/09 09:14:11 swa -# shamelessly adapted RPM stuff from the newest rpm that -# RedHat provided for the JB. -# -# Revision 1.4 2001/06/08 20:54:18 swa -# type with status file. remove forward et. al from file list. -# -# Revision 1.3 2001/06/07 17:28:10 swa -# cosmetics -# -# Revision 1.2 2001/06/04 18:31:58 swa -# files are now prefixed with either `confdir' or `logdir'. -# `make redhat-dist' replaces both entries confdir and logdir -# with redhat values -# -# Revision 1.1 2001/06/04 10:44:57 swa -# `make redhatr-dist' now works. Except for the paths -# in the config file. -# -# -# diff --git a/external/privoxy/privoxy-suse.spec b/external/privoxy/privoxy-suse.spec deleted file mode 100644 index fc39938..0000000 --- a/external/privoxy/privoxy-suse.spec +++ /dev/null @@ -1,556 +0,0 @@ -# $Id: privoxy-suse.spec,v 1.33 2009/03/21 10:46:15 fabiankeil Exp $ -# -# Written by and Copyright (C) 2001-2006 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# - -# do not set to %{name} -%define privoxyconf %{_sysconfdir}/privoxy -%define privoxy_uid 73 -%define privoxy_gid 73 - - -Summary: Privoxy - privacy enhancing proxy -Vendor: Privoxy.Org -Name: privoxy-suse -Distribution: defineme -Version: 3.0.12 -Release: 1 -# Needs makefile change: Source: http://prdownloads.sourceforge.net/ijbswa/privoxy-%{version}-%{status}-src.… -Source: http://prdownloads.sourceforge.net/ijbswa/privoxy-%{version}.tar.gz -# not sure if this works -BuildRoot: %{_tmppath}/%{name}-%{version}-root -Packager: http://www.privoxy.org/ -License: GPL -Group: Networking/Utilities -URL: http://www.privoxy.org/ -Autoreqprov: on -BuildRequires: perl gzip libtool autoconf -Conflicts: junkbuster-raw junkbuster-blank junkbuster-suse junkbuster privoxy - -# -# ----------------------------------------------------------------------------- -# -%description -Privoxy is a web proxy with advanced filtering capabilities for -protecting privacy, modifying web page data, managing cookies, -controlling access, and removing ads, banners, pop-ups and other -obnoxious Internet junk. Privoxy has a very flexible configuration and -can be customized to suit individual needs and tastes. Privoxy has -application for both stand-alone systems and multi-user networks. - -Privoxy is based on the Internet Junkbuster. - -Authors: --------- - http://www.privoxy.org/ - -SuSE series: n - -# -# ----------------------------------------------------------------------------- -# -%prep -%setup -c - -# -# ----------------------------------------------------------------------------- -# -%build -autoheader -autoconf -./configure --disable-dynamic-pcre -make - - -## Explicitily stripping is not recomended. -## This is handled altomaticaly by RPM, and can couse troubles if -## anyone wants to build an unstriped version - morcego -#strip privoxy - -# -# ----------------------------------------------------------------------------- -# -%install -[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT -mkdir -p ${RPM_BUILD_ROOT}%{_sbindir} \ - ${RPM_BUILD_ROOT}%{_mandir}/man8 \ - ${RPM_BUILD_ROOT}/var/log/privoxy \ - ${RPM_BUILD_ROOT}%{privoxyconf}/templates \ - ${RPM_BUILD_ROOT}%{_sysconfdir}/logrotate.d \ - ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d -gzip README AUTHORS ChangeLog privoxy.1 LICENSE || /bin/true -install -s -m 744 privoxy $RPM_BUILD_ROOT%{_sbindir}/privoxy -cp -f privoxy.1.gz $RPM_BUILD_ROOT%{_mandir}/man8/privoxy.8.gz -cp -f *.action $RPM_BUILD_ROOT%{privoxyconf}/ -cp -f default.filter $RPM_BUILD_ROOT%{privoxyconf}/default.filter -cp -f trust $RPM_BUILD_ROOT%{privoxyconf}/trust -cp -f templates/* $RPM_BUILD_ROOT%{privoxyconf}/templates/ -cp -f privoxy.logrotate $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/privoxy -install -m 755 privoxy.init.suse $RPM_BUILD_ROOT%{_sysconfdir}/init.d/privoxy -install -m 711 -d $RPM_BUILD_ROOT/var/log/privoxy -ln -sf /etc/init.d/privoxy $RPM_BUILD_ROOT/usr/sbin/rcprivoxy - -# verify all file locations, etc. in the config file -# don't start with ^ or commented lines are not replaced -cat config | \ - sed 's/^confdir.*/confdir \/etc\/privoxy/g' | \ -# sed 's/^permissionsfile.*/permissionsfile \/etc\/privoxy\/permissionsfile/g' | \ -# sed 's/^filterfile.*/default.filter \/etc\/privoxy\/default.filter/g' | \ -# sed 's/^logfile.*/logfile \/var\/log\/privoxy\/logfile/g' | \ -# sed 's/^forward.*/forward \/etc\/privoxy\/forward/g' | \ -# sed 's/^aclfile.*/aclfile \/etc\/privoxy\/aclfile/g' > \ - sed 's/^logdir.*/logdir \/var\/log\/privoxy/g' > \ - $RPM_BUILD_ROOT%{privoxyconf}/config - -# -# ----------------------------------------------------------------------------- -# -%pre -# We check to see if the user privoxy exists. -# If it does, we do nothing -# If we don't, we check to see if the user junkbust exist and, in case it -# does, we change it do privoxy. If it also does not exist, we create the -# privoxy user -- morcego -id privoxy > /dev/null 2>&1 -if [ $? -eq 1 ]; then - id junkbust > /dev/null 2>&1 - if [ $? -eq 0 ]; then - /usr/sbin/usermod -u %{privoxy_uid} -g %{privoxy_gid} -l privoxy -d %{_sysconfdir}/privoxy -s "" junkbust > /dev/null 2>&1 - else -# -r does not work on suse. - /usr/sbin/groupadd -g %{privoxy_gid} privoxy - /usr/sbin/useradd -u %{privoxy_uid} -d %{_sysconfdir}/privoxy -g privoxy -s "" privoxy > /dev/null 2>&1 - fi -fi - -# -# ----------------------------------------------------------------------------- -# -%post -[ -f /var/log/privoxy/privoxy ] &&\ - mv -f /var/log/privoxy/privoxy /var/log/privoxy/logfile || /bin/true -chown -R privoxy:privoxy /var/log/privoxy 2>/dev/null -chown -R privoxy:privoxy /etc/privoxy 2>/dev/null -# not available on suse -#if [ "$1" = "1" ]; then -# /sbin/chkconfig --add privoxy -# /sbin/service privoxy condrestart > /dev/null 2>&1 -#fi -# 01/09/02 HB, getting rid of any user=junkbust -# Changed by morcego to use the id command. -id junkbust > /dev/null 2>&1 && /usr/sbin/userdel junkbust || /bin/true -sbin/insserv etc/init.d/privoxy - -# -# ----------------------------------------------------------------------------- -# -%preun -# need to stop the service on suse. swa. -#if [ "$1" = "0" ]; then -# /sbin/service privoxy stop > /dev/null 2>&1 ||: -#fi - -# -# ----------------------------------------------------------------------------- -# -%postun -sbin/insserv etc/init.d/ -# dont forget to remove user and group privoxy -id privoxy > /dev/null 2>&1 && /usr/sbin/userdel privoxy || /bin/true - -# -# ----------------------------------------------------------------------------- -# -%clean -[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT - -# -# ----------------------------------------------------------------------------- -# -%files -%defattr(-,root,root) -%doc README.gz AUTHORS.gz ChangeLog.gz LICENSE.gz -%doc doc/webserver/developer-manual -%doc doc/webserver/user-manual -%doc doc/webserver/faq -%doc doc/webserver/p_doc.css -%doc doc/webserver/privoxy-index.html -%doc doc/webserver/images -%doc doc/webserver/man-page - -%dir %{privoxyconf} -%config %{privoxyconf}/* -%attr(0740,privoxy,privoxy) %dir /var/log/privoxy -%config %{_sysconfdir}/logrotate.d/privoxy -%attr(0755,root,root)/usr/sbin/privoxy -%{_mandir}/man8/* -%config %{_sysconfdir}/init.d/privoxy -/usr/sbin/rcprivoxy - -# -# ----------------------------------------------------------------------------- -# -%changelog -* Wed Sep 20 2006 Hal Burgiss <hal(a)foobox.net> -- Bump version for 3.0.5. - -* Fri Sep 08 2006 Hal Burgiss <hal(a)foobox.net> -- Bump version for 3.0.4. - -* Wed Mar 26 2003 Andreas Oesterhelt <andreas(a)oesterhelt.org> -- Bump version for 3.0.2. - -* Wed Mar 19 2003 Hal Burgiss <hal(a)foobox.net> -- Bump version for 3.0.1. - -* Tue Aug 25 2002 Hal Burgiss <hal(a)foobox.net> -- Bump version for 3.0.0 :) - -* Tue Aug 06 2002 Hal Burgiss <hal(a)foobox.net> -- Reset version for 2.9.18. - -* Wed Jul 30 2002 Hal Burgiss <hal(a)foobox.net> -- Reset version for 2.9.17. - -* Sat Jul 27 2002 Hal Burgiss <hal(a)foobox.net> -- Reset version and release for 2.9.16. - -* Mon May 27 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Index.html is now privoxy-index.html for doc usage. - -* Mon May 27 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Index.html is now privoxy-index.html for doc usage. - -* Sat May 25 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Add html man page so index.html does not 404. - -* Fri May 24 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.15-1 -- Add doc/images directory. - -* Fri May 03 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-suse-2.9.15-1 -- Version bump - -* Fri Apr 26 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-suse-2.9.14-3 -- Changing Vendor to Privoxy.Org - -* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob(a)tisbrasil.com.br> -+ privoxy-suse-2.9.14-2 -- Bumping release to reflect the new value on configure.in -- Taking the oportunity to change the header Copyright to License. The - Copyright headers is deprecated, and after all, GPL is a license, not a - Copyright - -* Mon Apr 08 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-4 -- Add LICENSE.gz, p_web.css, and index.html. Add autoconf -- to Buildrequires. - -* Wed Mar 27 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-3 -- Doc css has changed names. - -* Tue Mar 25 2002 Hal Burgiss <hal(a)foobox.net> -+ privoxy-2.9.13-3 -- Minor fix to description. - -* Sun Mar 24 2002 Hal Burgiss <hal(a)foobox.net> -- added faq to docs. - -* Thu Mar 21 2002 Hal Burgiss <hal(a)foobox.net> -- added ijb_docs.css to docs. - -* Mon Mar 11 2002 Hal Burgiss <hal(a)foobox.net> -- Remove --enable-no-gifs from configure. - -* Sun Mar 03 2002 Hal Burgiss <hal(a)foobox.net> -- /bin/false for shell causes init script to fail. Reverting. - -* Wed Jan 09 2002 Hal Burgiss <hal(a)foobox.net> -- Removed UID 73. Included user-manual and developer-manual in docs. - Include other actions files. Default shell is now /bin/false. - Userdel user=junkbust. ChangeLog was not zipped. Removed - RPM_OPT_FLAGS kludge. - -* Fri Dec 28 2001 Thomas Steudten <thomas(a)steudten.ch> -- add paranoia check for 'rm -rf $RPM_BUILD_ROOT' -- add gzip to 'BuildRequires' - -* Sat Dec 1 2001 Hal Burgiss <hal(a)foobox.net> -- actionsfile is now ijb.action. - -* Tue Nov 6 2001 Thomas Steudten <thomas(a)steudten.ch> -- Compress manpage -- Add more documents for installation -- Add version string to name and source - -* Wed Oct 24 2001 Hal Burigss <hal(a)foobox.net> -- Back to user 'junkbuster' and fix configure macro. - -* Wed Oct 10 2001 Hal Burigss <hal(a)foobox.net> -- More changes for user 'junkbust'. Init script had 'junkbuster'. - -* Sun Sep 23 2001 Hal Burgiss <hal(a)foobox.net> -- Change of $RPM_OPT_FLAGS handling. Added new HTML doc files. -- Changed owner of /etc/junkbuster to shut up PAM/xauth log noise. - -* Thu Sep 13 2001 Hal Burgiss <hal(a)foobox.net> -- Added $RPM_OPT_FLAGS support, renaming of old logfile, and -- made sure no default shell exists for user junkbust. - -* Sun Jun 3 2001 Stefan Waldherr <stefan(a)waldherr.org> -- rework of RPM -* Wed Feb 14 2001 - uli(a)suse.de -- fixed init script -* Wed Dec 06 2000 - bjacke(a)suse.de -- renamed package to junkbuster -- fixed copyright tag -* Thu Nov 30 2000 - uli(a)suse.de -- moved init script to /etc/init.d -* Wed Feb 16 2000 - kukuk(a)suse.de -- Move /usr/man -> /usr/share/man -- Mark /etc/ijb as "config(noreplace)" -* Mon Sep 20 1999 - uli(a)suse.de -- fixed init script -* Mon Sep 13 1999 - bs(a)suse.de -- ran old prepare_spec on spec file to switch to new prepare_spec. -* Thu Apr 01 1999 - daniel(a)suse.de -- do not start ijb as root (security) -* Tue Mar 30 1999 - daniel(a)suse.de -- donŽt use saclfile.ini -* Tue Mar 30 1999 - daniel(a)suse.de -- small fix to whitelist-configuration, - version is and was 2.0.2 WITHOUT Stefan Waldherr's patches - (http://www.waldherr.org/junkbuster/) -* Mon Mar 01 1999 - daniel(a)suse.de -- new package: version 2.0 - -# $Log: privoxy-suse.spec,v $ -# Revision 1.33 2009/03/21 10:46:15 fabiankeil -# Bump version to 3.0.12. -# -# Revision 1.32 2009/02/15 17:18:14 fabiankeil -# - Bump version to 3.0.11. -# -# Revision 1.31 2008/08/30 12:46:49 fabiankeil -# The jarfile directive is gone. Update accordingly. -# -# Revision 1.30 2008/08/13 16:57:46 fabiankeil -# Change version to 3.0.10. -# -# Revision 1.29 2008/03/02 17:36:43 fabiankeil -# Set version to 3.0.9. -# -# Revision 1.28 2008/01/20 14:30:59 fabiankeil -# Set version to 3.0.8. -# -# Revision 1.27 2006/11/18 14:37:12 fabiankeil -# Bump version to 3.0.6. -# -# Revision 1.26 2006/09/20 23:51:26 hal9 -# Bump versions to 3.0.5 -# -# Revision 1.25 2006/09/09 00:35:10 hal9 -# Bumped versions to 3.0.4. Both files should be checked further. -# -# Revision 1.24 2006/07/18 14:48:47 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.20.2.10 2004/01/30 17:09:29 oes -# Bumped version for 3.0.3 -# -# Revision 1.20.2.9 2003/03/26 00:24:58 oes -# Bump version for 3.0.2 -# -# Revision 1.20.2.8 2003/03/20 03:27:11 hal9 -# Bump version for 3.0.1 pending release. -# -# Revision 1.20.2.7 2002/08/25 23:36:03 hal9 -# Bump version for 3.0.0. -# -# Revision 1.20.2.6 2002/08/10 11:28:50 oes -# Bumped version -# -# Revision 1.20.2.5 2002/08/07 01:08:49 hal9 -# Bumped version to 2.9.18. -# -# Revision 1.20.2.4 2002/07/30 21:51:19 hal9 -# Bump version to 2.9.17. -# -# Revision 1.20.2.3 2002/07/27 15:47:10 hal9 -# Reset version and release for 2.9.16. -# -# Revision 1.20.2.2 2002/05/28 02:39:38 hal9 -# Replace index.html with privoxy-index.html for docs. -# -# Revision 1.20.2.1 2002/05/26 17:20:23 hal9 -# Add images to doc dirs. -# -# Revision 1.20 2002/05/25 02:08:23 hal9 -# Add doc/images directory. -# Redhat: alphabetized list of templates (and I think added one in the process) -# -# Revision 1.19 2002/05/03 17:14:36 morcego -# *.spec: Version bump to 2.9.15 -# -rh.spec: noreplace for %%{privoxyconf}/config -# Will interrupt the build if versions from configure.in and -# specfile do not match -# -# Revision 1.18 2002/04/27 20:26:59 swa -# uid, gui 73 incorporated -# -# Revision 1.17 2002/04/26 15:51:05 morcego -# Changing Vendor value to Privoxy.Org -# -# Revision 1.16 2002/04/22 16:32:31 morcego -# configure.in, *.spec: Bumping release to 2 (2.9.14-2) -# -rh.spec: uid and gid are now macros -# -suse.spec: Changing the header Copyright to License (Copyright is -# deprecable) -# -# Revision 1.15 2002/04/16 18:49:07 oes -# Build with static built-in pcre -# -# Revision 1.14 2002/04/11 17:57:40 oes -# Fixed(?) Conflicts: Provides: Obsoletes: -# -# Revision 1.13 2002/04/11 10:09:20 oes -# Version 2.9.14 -# -# Revision 1.12 2002/04/09 13:29:43 swa -# build suse and gen-dist with html docs. do not generate docs while building rpm -# -# Revision 1.11 2002/04/09 03:12:37 hal9 -# Add LICENSE, p_web.css and index.html. Add autoconf to buildrequires. -# -# Revision 1.10 2002/04/08 20:24:13 swa -# fixed JB spelling -# -# Revision 1.9 2002/03/30 09:01:52 swa -# new release -# -# Revision 1.8 2002/03/27 23:46:41 hal9 -# ijb_docs.css to p_doc.css -# -# Revision 1.7 2002/03/27 00:49:39 hal9 -# Minor fix to description. -# -# Revision 1.6 2002/03/26 22:29:55 swa -# we have a new homepage! -# -# Revision 1.5 2002/03/25 03:10:50 hal9 -# Added faq to docs. -# -# Revision 1.4 2002/03/24 12:56:21 swa -# name change related issues. -# -# Revision 1.3 2002/03/24 12:44:31 swa -# new version string -# -# Revision 1.2 2002/03/24 11:40:14 swa -# name change -# -# Revision 1.1 2002/03/24 11:23:44 swa -# name change -# -# Revision 1.21 2002/03/21 16:04:33 hal9 -# added ijb_docs.css to %%doc -# -# Revision 1.20 2002/03/12 13:42:14 sarantis -# remove hardcoded "ijbswa" from build phase -# -# Revision 1.19 2002/03/11 22:59:05 hal9 -# Remove --enable-no-gifs -# -# Revision 1.18 2002/03/11 12:30:31 swa -# be consistent with rh spec file -# -# Revision 1.17 2002/03/08 19:30:23 swa -# remove user junkbuster after de-installation. -# synced suse with rh-specfile. installation -# and de-installation seem to work. -# -# Revision 1.16 2002/03/08 18:40:44 swa -# build requires tools. useradd and del works -# now. -# -# Revision 1.15 2002/03/07 19:23:50 swa -# i hate to scroll. suse: wrong configdir. -# -# Revision 1.14 2002/03/07 19:10:21 swa -# builds cleanly. thanks to kukuk(a)suse.de -# not yet tested. -# -# Revision 1.13 2002/03/07 18:25:56 swa -# synced redhat and suse build process -# -# Revision 1.12 2002/03/02 15:50:04 swa -# 2.9.11 version. more input for docs. -# -# Revision 1.11 2001/12/02 10:29:26 swa -# New version made these changes necessary. -# -# Revision 1.10 2001/10/31 19:27:27 swa -# consistent description. new name for suse since -# we had troubles with rpms of identical names -# on the webserver. -# -# Revision 1.9 2001/10/26 18:17:23 swa -# new version string -# -# Revision 1.8 2001/09/13 16:22:42 swa -# man page is legacy. suse rpm now contains html -# documentation. -# -# Revision 1.7 2001/09/10 17:44:22 swa -# integrate three pieces of documentation. -# -# Revision 1.6 2001/09/10 16:29:23 swa -# binary contained debug info. -# buildroot definition fucks up the build process under suse. -# program needs to write in varlogjunkbuster -# install all templates -# create varlogjunkbuster -# -# Revision 1.5 2001/06/09 09:13:29 swa -# description shorter -# -# Revision 1.4 2001/06/08 20:53:36 swa -# use buildroot, export init to separate file (better manageability) -# -# Revision 1.3 2001/06/07 17:28:10 swa -# cosmetics -# -# Revision 1.2 2001/06/07 17:18:44 swa -# header fixed -# -# diff --git a/external/privoxy/privoxy.1 b/external/privoxy/privoxy.1 deleted file mode 100644 index dca772a..0000000 --- a/external/privoxy/privoxy.1 +++ /dev/null @@ -1,216 +0,0 @@ -.\" This manpage has been automatically generated by docbook2man -.\" from a DocBook document. This tool can be found at: -.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> -.\" Please send any bug reports, improvements, comments, patches, -.\" etc. to Steve Cheng <steve(a)ggi-project.org>. -.TH "PRIVOXY" "1" "21 March 2009" "Privoxy 3.0.12" "" -.SH NAME -privoxy \- Privacy Enhancing Proxy -.SH SYNOPSIS - -\fBprivoxy\fR [\fB\-\-help\fR ] [\fB\-\-version\fR ] [\fB\-\-no-daemon\fR ] [\fB\-\-pidfile \fIpidfile\fB\fR ] [\fB\-\-user \fIuser[.group]\fB\fR ] [\fB\-\-chroot\fR ] [\fB\-\-pre-chroot-nslookup \fIhostname\fB\fR ] [\fB\fIconfigfile\fB\fR ] - -.SH "OPTIONS" -.PP -\fBPrivoxy\fR may be invoked with the following command line -options: -.TP -\fB\-\-help\fR -Print brief usage info and exit. -.TP -\fB\-\-version\fR -Print version info and exit. -.TP -\fB\-\-no-daemon\fR -Don't become a daemon, i.e. don't fork and become process group -leader, don't detach from controlling tty, and do all logging there. -.TP -\fB\-\-pidfile \fIpidfile\fB\fR -On startup, write the process ID to \fIpidfile\fR. -Delete the \fIpidfile\fR on exit. -Failure to create or delete the \fIpidfile\fR -is non-fatal. If no \fB\-\-pidfile\fR option is given, no PID file will be used. -.TP -\fB\-\-user \fIuser[.group]\fB\fR -After (optionally) writing the PID file, assume the user ID of -\fIuser\fR and the GID of -\fIgroup\fR, or, if the optional -\fIgroup\fR was not given, the default group of -\fIuser\fR. Exit if the privileges are not -sufficient to do so. -.TP -\fB\-\-chroot\fR -Before changing to the user ID given in the \-\-user option, chroot to -that user's home directory, i.e. make the kernel pretend to the -\fBPrivoxy\fR process that the directory tree starts -there. If set up carefully, this can limit the impact of possible -vulnerabilities in \fBPrivoxy\fR to the files contained in -that hierarchy. -.TP -\fB\-\-pre-chroot-nslookup \fIhostname\fB\fR -Initialize the resolver library using \fIhostname\fR -before chroot'ing. On some systems this reduces the number of files -that must be copied into the chroot tree. -.PP -If the \fIconfigfile\fR is not specified on the command line, -\fBPrivoxy\fR will look for a file named -\fIconfig\fR in the current directory. If no -\fIconfigfile\fR is found, \fBPrivoxy\fR will -fail to start. -.SH "DESCRIPTION" -.PP -Privoxy is a non-caching web proxy with advanced filtering capabilities -for enhancing privacy, modifying web page data and HTTP headers, controlling -access, and removing ads and other obnoxious Internet junk. Privoxy has a -flexible configuration and can be customized to suit individual needs and tastes. -It has application for both stand-alone systems and multi-user networks. -.PP -Privoxy is Free Software and licensed under the GPL2. -.SH "INSTALLATION AND USAGE" -.PP -Browsers can either be individually configured to use -\fBPrivoxy\fR as a HTTP proxy (recommended), -or \fBPrivoxy\fR can be combined with a packet -filter to build an intercepting proxy -(see \fIconfig\fR). The default setting is for -localhost, on port 8118 (configurable in the main config file). To set the -HTTP proxy in Firefox, go through: \fBTools\fR; -\fBOptions\fR; \fBGeneral\fR; -\fBConnection Settings\fR; -\fBManual Proxy Configuration\fR. -.PP -For Internet Explorer, go through: \fBTools\fR; -\fBInternet Properties\fR; \fBConnections\fR; -\fBLAN Settings\fR. -.PP -The Secure (SSL) Proxy should also be set to the same values, otherwise -https: URLs will not be proxied. Note: \fBPrivoxy\fR can only -proxy HTTP and HTTPS traffic. Do not try it with FTP or other protocols. -HTTPS presents some limitations, and not all features will work with HTTPS -connections. -.PP -For other browsers, check the documentation. -.SH "CONFIGURATION" -.PP -\fBPrivoxy\fR can be configured with the various configuration -files. The default configuration files are: \fIconfig\fR, -\fIdefault.filter\fR, \fIdefault.action\fR and -\fIdefault.action\fR. \fIuser.action\fR should -be used for locally defined exceptions to the default rules in -\fImatch-all.action\fR and \fIdefault.action\fR, -and \fIuser.filter\fR for locally defined filters. These are -well commented. On Unix and Unix-like systems, these are located in -\fI/etc/privoxy/\fR by default. -.PP -\fBPrivoxy\fR uses the concept of \fBactions\fR -in order to manipulate the data stream between the browser and remote sites. -There are various actions available with specific functions for such things -as blocking web sites, managing cookies, etc. These actions can be invoked -individually or combined, and used against individual URLs, or groups of URLs -that can be defined using wildcards and regular expressions. The result is -that the user has greatly enhanced control and freedom. -.PP -The actions list (ad blocks, etc) can also be configured with your -web browser at http://config.privoxy.org/ -(assuming the configuration allows it). -\fBPrivoxy's\fR configuration parameters can also be viewed at -the same page. In addition, \fBPrivoxy\fR can be toggled on/off. -This is an internal page, and does not require Internet access. -.PP -See the \fIUser Manual\fR for a detailed -explanation of installation, general usage, all configuration options, new -features and notes on upgrading. -.SH "FILES" - -.nf - - \fI/usr/sbin/privoxy\fR - \fI/etc/privoxy/config\fR - \fI/etc/privoxy/match-all.action\fR - \fI/etc/privoxy/default.action\fR - \fI/etc/privoxy/user.action\fR - \fI/etc/privoxy/default.filter\fR - \fI/etc/privoxy/user.filter\fR - \fI/etc/privoxy/trust\fR - \fI/etc/privoxy/templates/*\fR - \fI/var/log/privoxy/logfile\fR -.fi -.PP -Various other files should be included, but may vary depending on platform -and build configuration. Additional documentation should be included in the local -documentation directory. -.SH "SIGNALS" -.PP -\fBPrivoxy\fR terminates on the \fBSIGINT\fR, -\fBSIGTERM\fR and \fBSIGABRT\fR signals. Log -rotation scripts may cause a re-opening of the logfile by sending a -\fBSIGHUP\fR to \fBPrivoxy\fR. Note that unlike -other daemons, \fBPrivoxy\fR does not need to be made aware of -config file changes by \fBSIGHUP\fR -- it will detect them -automatically. -.SH "NOTES" -.PP -Please see the \fIUser Manual\fR on how to contact the -developers, for feature requests, reporting problems, and other questions. -.SH "SEE ALSO" -.PP -Other references and sites of interest to \fBPrivoxy\fR -users: -.PP - -http://www.privoxy.org/, -the \fBPrivoxy\fR Home page. - -http://www.privoxy.org/faq/, -the \fBPrivoxy\fR FAQ. - -http://www.privoxy.org/developer-manual/, -the \fBPrivoxy\fR developer manual. - -https://sourceforge.net/projects/ijbswa/, -the Project Page for \fBPrivoxy\fR on -SourceForge. - -http://config.privoxy.org/, -the web-based user interface. \fBPrivoxy\fR must be -running for this to work. Shortcut: http://p.p/ - -https://sourceforge.net/tracker/?group_id=11118&atid=460288, to submit ``misses'' and other -configuration related suggestions to the developers. -.SH "DEVELOPMENT TEAM" - -.nf - Fabian Keil, lead developer - David Schmidt, developer - - Hal Burgiss - Mark Miller - Gerry Murphy - Lee Rian - Roland Rosenfeld - J\[:o]rg Strohmayer -.fi -.SH "COPYRIGHT AND LICENSE" -.SS "COPYRIGHT" -.PP -Copyright (C) 2001-2009 by Privoxy Developers <ijbswa-developers(a)lists.sourceforge.net> -.PP -Some source code is based on code Copyright (C) 1997 by Anonymous Coders -and Junkbusters, Inc. and licensed under the \fIGNU General Public -License\fR. -.SS "LICENSE" -.PP -\fBPrivoxy\fR is free software; you can -redistribute it and/or modify it under the terms of the -\fIGNU General Public License\fR, version 2, -as published by the Free Software Foundation. -.PP -This program is distributed in the hope that it will be useful, but WITHOUT -ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the \fIGNU General Public License\fR for details. -.PP -You should have received a copy of the \fIGNU GPL\fR -along with this program; if not, write to the Free Software -Foundation, Inc. 51 Franklin Street, Fifth Floor -Boston, MA 02110-1301 -USA diff --git a/external/privoxy/privoxy.init b/external/privoxy/privoxy.init deleted file mode 100644 index 3b3caf9..0000000 --- a/external/privoxy/privoxy.init +++ /dev/null @@ -1,276 +0,0 @@ -#!/bin/sh -# -# This is file /etc/rc.d/init.d/privoxy and was put here -# by the privoxy rpm -# -# chkconfig: 2345 84 09 -# -# description: Web proxy with advanced filtering capabilities \ -# such as filtering web page content, managing \ -# cookies and removing ads -# - -# ******************************************************************** -# -# File : $Source: /cvsroot/ijbswa/current/privoxy.init,v $ -# -# Purpose : This shell script takes care of starting and stopping -# privoxy. -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: privoxy.init,v $ -# Revision 1.11 2006/07/18 14:48:47 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.8.2.3 2002/12/10 20:52:16 kick_ -# better service description. This text will be shown when the user configures the services -# -# Revision 1.8.2.2 2002/08/05 08:42:13 kick_ -# same permissions, same runlevels as all the other initscripts -# -# Revision 1.8.2.1 2002/07/12 09:14:26 kick_ -# don't use ghost files for rcX.d/*, chkconfig is available to do this job. Enable translation of error messge -# -# Revision 1.8 2002/04/09 02:51:31 hal9 -# Changed $JB to $PRIVOXY. -# -# Revision 1.7 2002/04/08 14:54:51 morcego -# Moved the chkconfig comments to the begining of the file, couse Linuxconf -# was getting confused with it where it was. -# -# Revision 1.6 2002/03/26 22:29:55 swa -# we have a new homepage! -# -# Revision 1.5 2002/03/25 06:14:18 morcego -# Removing the OPRG definition (no longer needed) -# -# Revision 1.4 2002/03/25 04:16:48 hal9 -# Fix proper config file location. -# -# Revision 1.3 2002/03/24 19:12:15 hal9 -# Fixed some naming conflicts. -# -# Revision 1.2 2002/03/24 11:40:14 swa -# name change -# -# Revision 1.1 2002/03/24 11:23:44 swa -# name change -# -# Revision 1.1 2002/03/22 20:53:03 morcego -# - Ongoing process to change name to JunkbusterNG -# - configure/configure.in: no change needed -# - GNUmakefile.in: -# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz -# - PROGRAM = jbng@EXEEXT@ -# - rh-spec now references as junkbusterng-rh.spec -# - redhat-upload: references changed to junkbusterng-* (package names) -# - tarball-dist: references changed to JunkbusterNG-distribution-* -# - tarball-src: now JunkbusterNG-* -# - install: initscript now junkbusterng.init and junkbusterng (when -# installed) -# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec -# - junkbusterng.spec: -# - References to the expression ijb where changed where possible -# - New package name: junkbusterng (all in lower case, acording to -# the LSB recomendation) -# - Version changed to: 2.9.13 -# - Release: 1 -# - Added: junkbuster to obsoletes and conflicts (Not sure this is -# right. If it obsoletes, why conflict ? Have to check it later) -# - Summary changed: Stefan, please check and aprove it -# - Changes description to use the new name -# - Sed string was NOT changed. Have to wait to the manpage to -# change first -# - Keeping the user junkbuster for now. It will require some aditional -# changes on the script (scheduled for the next specfile release) -# - Added post entry to move the old logfile to the new log directory -# - Removing "chkconfig --add" entry (not good to have it automaticaly -# added to the startup list). -# - Added preun section to stop the service with the old name, as well -# as remove it from the startup list -# - Removed the chkconfig --del entry from the conditional block on -# the preun scriptlet (now handled on the %files section) -# - junkbuster.init: renamed to junkbusterng.init -# - junkbusterng.init: -# - Changed JB_BIN to jbng -# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to -# be used where necessary (config dir) -# -# Aditional notes: -# - The config directory is /etc/junkbuster yet. Have to change it on the -# specfile, after it is changes on the code -# - The only files that got renamed on the cvs tree were the rh specfile and -# the init file. Some file references got changes on the makefile and on the -# rh-spec (as listed above) -# -# Revision 1.15 2002/03/09 15:05:58 swa -# wrong user.group -# -# Revision 1.14 2002/03/06 06:13:40 hal9 -# Adapted for Andreas' changes for --user and --pidfile. -# -# Revision 1.13 2002/03/05 05:10:10 oes -# Changed pidfile path to conform with FHS -# -# Revision 1.12 2002/03/04 20:44:36 oes -# Changed to new cmdline syntax -# -# Revision 1.11 2001/12/30 14:07:32 steudten -# - Add signal handling (unix) -# - Add SIGHUP handler (unix) -# - Add creation of pidfile (unix) -# - Add action 'top' in rc file (RH) -# - Add entry 'SIGNALS' to manpage -# - Add exit message to logfile (unix) -# -# Revision 1.10 2001/11/05 21:30:23 steudten -# Make JB startup without & due to be a 'real' daemon right now. -# Make the script easy to change. -# -# Revision 1.9 2001/09/15 01:53:12 steudten -# -# Remove test for subsys flag in start. Some minor changes. -# -# Revision 1.8 2001/06/28 13:50:36 sarantis -# swap ?$ with $?; remove bogus ";;" -# -# Revision 1.7 2001/06/28 13:40:26 sarantis -# remove single quotes from $JB; it was not expanded. -# -# Revision 1.6 2001/06/28 13:38:42 sarantis -# formatting changes; individual return values are returned from the init script. -# -# Revision 1.5 2001/06/11 11:37:40 sarantis -# Minor editing changes. -# -# Revision 1.4 2001/06/09 09:14:11 swa -# shamelessly adapted RPM stuff from the newest rpm that -# RedHat provided for the JB. -# -# Revision 1.3 2001/05/25 10:12:44 oes -# Fixed default case in switch statement (# -> *) -# -# Revision 1.2 2001/05/24 07:52:24 swa -# added header. removed ^M. -# -# -# ********************************************************************/ - - -# Source function library. -. /etc/rc.d/init.d/functions - -. /etc/sysconfig/network - -# Check that networking is up. -[ ${NETWORKING} = "no" ] && exit 0 - -PRIVOXY_PRG="privoxy" -PRIVOXY_BIN="/usr/sbin/$PRIVOXY_PRG" -PRIVOXY_CONF="/etc/$PRIVOXY_PRG/config" -PRIVOXY_USER="privoxy" -PRIVOXY_PID=/var/run/$PRIVOXY_PRG.pid -PRIVOXY_LOCK=/var/lock/subsys/$PRIVOXY_PRG -PRIVOXY="$PRIVOXY_BIN --user $PRIVOXY_USER.$PRIVOXY_USER --pidfile $PRIVOXY_PID $PRIVOXY_CONF" - -# some checks for us -! [ -x $PRIVOXY_BIN ] && echo $"Can't find $PRIVOXY_BIN, exit." && exit 0 -! [ -f $PRIVOXY_CONF ] && echo $"Can't find $PRIVOXY_CONF, exit." && exit 0 - -# See how we were called. - -start () { - # start daemon - echo -n $"Starting $PRIVOXY_PRG: " - if [ -f $PRIVOXY_PID ]; then - killproc $PRIVOXY_PRG && rm -f $PRIVOXY_LOCK $PRIVOXY_PID - RETVAL=$? - [ $RETVAL != 0 ] && return $RETVAL - fi - daemon $PRIVOXY - RETVAL=$? - echo - [ $RETVAL = 0 ] && touch $PRIVOXY_LOCK - return $RETVAL -} - -stop () { - # stop daemon - echo -n $"Stopping $PRIVOXY_PRG: " - killproc $PRIVOXY_PRG && rm -f $PRIVOXY_LOCK $PRIVOXY_PID - RETVAL=$? - echo - return $RETVAL -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - reload) - if [ -f $PRIVOXY_PID ] ; then - kill -HUP `cat $PRIVOXY_PID` - RETVAL=$? - fi - ;; - restart) - stop - start - RETVAL=$? - ;; - condrestart) - # restart only if already running - if [ -f $PRIVOXY_PID ] ; then - stop - start - RETVAL=$? - fi - ;; - status) - status $PRIVOXY_PRG - RETVAL=$? - ;; - top) - if [ -f $PRIVOXY_PID ]; then - a="" - for i in `pidof $PRIVOXY_PRG` ; do - a="$a -p $i" - done - top $a - fi - ;; - *) - echo $"Usage: $PRIVOXY_PRG {start|stop|reload|restart|condrestart|status|top}" - exit 1 -esac - -exit $RETVAL diff --git a/external/privoxy/privoxy.init.suse b/external/privoxy/privoxy.init.suse deleted file mode 100644 index fee872a..0000000 --- a/external/privoxy/privoxy.init.suse +++ /dev/null @@ -1,127 +0,0 @@ -#! /bin/sh -# ******************************************************************** -# -# File : $Source: /cvsroot/ijbswa/current/privoxy.init.suse,v $ -# -# Purpose : This shell script takes care of starting and stopping -# privoxy. -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: privoxy.init.suse,v $ -# Revision 1.4 2006/07/18 14:48:47 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.3.2.1 2003/03/17 14:04:16 oes -# No longer use obsolete rc.config -# -# Revision 1.3 2002/03/26 22:29:55 swa -# we have a new homepage! -# -# Revision 1.2 2002/03/24 11:40:14 swa -# name change -# -# Revision 1.1 2002/03/24 11:23:44 swa -# name change -# -# Revision 1.7 2002/03/11 11:44:46 oes -# Working in suggestions by Thorsten Kukuk <kukuk(a)suse.de> -# -# Revision 1.6 2002/03/09 14:56:34 swa -# wrong user.group -# -# Revision 1.5 2002/03/08 21:39:59 oes -# setgid to nogroup -# -# Revision 1.4 2002/03/05 19:54:37 oes -# Preliminary version of SuSE 8.0-certified init script ,-) -# -# Revision 1.3 2002/03/05 05:28:05 oes -# Added pidfile creation -# -# Revision 1.2 2001/09/10 16:25:46 swa -# jb did not start. none of the arguments worked. fixed. -# -# Revision 1.1 2001/06/08 20:53:36 swa -# use buildroot, export init to separate file (better manageability) -# -# -# -# ********************************************************************/ -### BEGIN INIT INFO -# Provides: privoxy -# Required-Start: $network $syslog $remote_fs -# Required-Stop: -# Default-Start: 3 5 -# Default-Stop: 0 1 2 6 -# Description: Starts Privoxy -### END INIT INFO - -. /etc/rc.status -rc_reset - -case "$1" in - start) - echo -n "Starting Privoxy" - if [ ! -f /var/run/privoxy.pid ] || ! kill -0 `cat /var/run/privoxy.pid` 2> /dev/null; then - /usr/sbin/privoxy --user privoxy.privoxy --pidfile /var/run/privoxy.pid /etc/privoxy/config 2> /dev/null - else - false - fi - rc_status -v - ;; - stop) - echo -n "Shutting down Privoxy" - killproc -TERM /usr/sbin/privoxy && rm -f /var/run/privoxy.pid - rc_status -v - ;; - reload) - echo -n "Reloading Privoxy" - kill -HUP `cat /var/run/privoxy.pid` - rc_status -v - ;; - try-restart) - $0 stop && $0 start - rc_status - ;; - restart) - $0 stop - $0 start - rc_status - ;; - status) - echo -n "Checking for Privoxy" - checkproc /usr/sbin/privoxy - rc_status -v - ;; - *) - echo "Usage: $0 {start|restart|reload|status|stop}" - exit 1 -esac - -rc_exit diff --git a/external/privoxy/privoxy.logrotate b/external/privoxy/privoxy.logrotate deleted file mode 100644 index bbfe652..0000000 --- a/external/privoxy/privoxy.logrotate +++ /dev/null @@ -1,107 +0,0 @@ -# -# Logrotate file for Privoxy RPM -# -# ******************************************************************** -# -# File : $Source: /cvsroot/ijbswa/current/privoxy.logrotate,v $ -# -# Purpose : Rotates all potential Privoxy logfiles -# -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: privoxy.logrotate,v $ -# Revision 1.6 2006/07/18 14:48:47 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.4.2.1 2002/06/25 17:33:07 kick_ -# Avoid error messages if privoxy hasn't run at all and there is no logfile yet by adding missingok to the logrotate script -# -# Revision 1.4 2002/03/26 22:29:55 swa -# we have a new homepage! -# -# Revision 1.3 2002/03/24 15:19:57 swa -# name change related issue. -# -# Revision 1.2 2002/03/24 11:40:14 swa -# name change -# -# Revision 1.1 2002/03/24 11:23:44 swa -# name change -# -# Revision 1.7 2001/12/30 14:07:32 steudten -# - Add signal handling (unix) -# - Add SIGHUP handler (unix) -# - Add creation of pidfile (unix) -# - Add action 'top' in rc file (RH) -# - Add entry 'SIGNALS' to manpage -# - Add exit message to logfile (unix) -# -# Revision 1.6 2001/12/13 23:19:43 steudten -# Add 'restart' of junkbuster service after rotate logfiles. -# Better we could use the well known 'kill -HUP', but the handler -# isn't there at this time. -# -# Revision 1.5 2001/11/05 21:31:51 steudten -# Change switch mode from weekly to size 1M -# -# Revision 1.4 2001/06/28 13:30:22 sarantis -# add missingok for the jarfile entry -# -# Revision 1.3 2001/06/04 18:31:58 swa -# files are now prefixed with either `confdir' or `logdir'. -# `make redhat-dist' replaces both entries confdir and logdir -# with redhat values -# -# Revision 1.2 2001/05/24 07:52:24 swa -# added header. removed ^M. -# -# Revision 1.3 2001/05/24 07:41:33 swa -# added header -# -# -# -# ********************************************************************/ - -/var/log/privoxy/logfile { - missingok - compress - size 1M - postrotate - /sbin/service privoxy reload 2> /dev/null || true - endscript -} - -/var/log/privoxy/jarfile { - missingok - compress - size 1M - postrotate - /sbin/service privoxy reload 2> /dev/null || true - endscript -} diff --git a/external/privoxy/project.h b/external/privoxy/project.h deleted file mode 100644 index 300d9d6..0000000 --- a/external/privoxy/project.h +++ /dev/null @@ -1,1885 +0,0 @@ -#ifndef PROJECT_H_INCLUDED -#define PROJECT_H_INCLUDED -/** Version string. */ -#define PROJECT_H_VERSION "$Id: project.h,v 1.129 2009/03/08 14:12:51 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/project.h,v $ - * - * Purpose : Defines data structures which are widely used in the - * project. Does not define any variables or functions - * (though it does declare some macros). - * - * Copyright : Written by and Copyright (C) 2001-2009 the - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: project.h,v $ - * Revision 1.129 2009/03/08 14:12:51 fabiankeil - * All the CSP_FLAG_FOO bit masks should be unsigned ints. - * - * Revision 1.128 2009/03/07 13:09:17 fabiankeil - * Change csp->expected_content and_csp->expected_content_length from - * size_t to unsigned long long to reduce the likelihood of integer - * overflows that would let us close the connection prematurely. - * Bug found while investigating #2669131, reported by cyberpatrol. - * - * Revision 1.127 2008/12/20 14:53:55 fabiankeil - * Add config option socket-timeout to control the time - * Privoxy waits for data to arrive on a socket. Useful - * in case of stale ssh tunnels or when fuzz-testing. - * - * Revision 1.126 2008/12/14 17:02:54 fabiankeil - * Fix a cparser warning. - * - * Revision 1.125 2008/11/20 08:22:28 fabiankeil - * Remove an obsolete comment. - * - * Revision 1.124 2008/11/16 12:43:49 fabiankeil - * Turn keep-alive support into a runtime feature - * that is disabled by setting keep-alive-timeout - * to a negative value. - * - * Revision 1.123 2008/11/10 16:55:59 fabiankeil - * Fix a gcc44 warning (in filters.c). - * - * Revision 1.122 2008/10/16 07:11:34 fabiankeil - * Fix a bunch of gcc44 conversion warnings. - * - * Revision 1.121 2008/10/09 18:21:41 fabiankeil - * Flush work-in-progress changes to keep outgoing connections - * alive where possible. Incomplete and mostly #ifdef'd out. - * - * Revision 1.120 2008/09/21 13:36:52 fabiankeil - * If change-x-forwarded-for{add} is used and the client - * sends multiple X-Forwarded-For headers, append the client's - * IP address to each one of them. "Traditionally" we would - * lose all but the last one. - * - * Revision 1.119 2008/09/20 10:04:33 fabiankeil - * Remove hide-forwarded-for-headers action which has - * been obsoleted by change-x-forwarded-for{block}. - * - * Revision 1.118 2008/09/19 15:26:29 fabiankeil - * Add change-x-forwarded-for{} action to block or add - * X-Forwarded-For headers. Mostly based on code removed - * before 3.0.7. - * - * Revision 1.117 2008/08/30 12:03:07 fabiankeil - * Remove FEATURE_COOKIE_JAR. - * - * Revision 1.116 2008/05/20 16:05:02 fabiankeil - * Move parsers structure definition from project.h to parsers.h. - * - * Revision 1.115 2008/05/19 16:57:20 fabiankeil - * Declare all members of the parsers structure immutable. - * - * Revision 1.114 2008/04/11 16:35:39 fabiankeil - * Oops, I forgot to shorten the URL_SPEC_INITIALIZER in my last commit. - * - * Revision 1.113 2008/04/10 14:41:04 fabiankeil - * Ditch url_spec's path member now that it's no longer used. - * - * Revision 1.112 2008/04/06 15:18:34 fabiankeil - * Oh well, rename the --enable-pcre-host-patterns option to - * --enable-extended-host-patterns as it's not really PCRE syntax. - * - * Revision 1.111 2008/04/06 14:54:26 fabiankeil - * Use PCRE syntax in host patterns when configured - * with --enable-pcre-host-patterns. - * - * Revision 1.110 2008/03/29 12:13:46 fabiankeil - * Remove send-wafer and send-vanilla-wafer actions. - * - * Revision 1.109 2008/03/28 15:13:41 fabiankeil - * Remove inspect-jpegs action. - * - * Revision 1.108 2008/03/27 18:27:36 fabiankeil - * Remove kill-popups action. - * - * Revision 1.107 2008/03/26 18:07:08 fabiankeil - * Add hostname directive. Closes PR#1918189. - * - * Revision 1.106 2008/03/24 11:21:03 fabiankeil - * Share the action settings for multiple patterns in the same - * section so we waste less memory for gigantic block lists - * (and load them slightly faster). Reported by Franz Schwartau. - * - * Revision 1.105 2008/03/21 11:16:27 fabiankeil - * Garbage-collect csp->my_ip_addr_str and csp->my_hostname. - * - * Revision 1.104 2008/03/04 18:30:40 fabiankeil - * Remove the treat-forbidden-connects-like-blocks action. We now - * use the "blocked" page for forbidden CONNECT requests by default. - * - * Revision 1.103 2008/03/01 14:00:45 fabiankeil - * Let the block action take the reason for the block - * as argument and show it on the "blocked" page. - * - * Revision 1.102 2008/02/03 13:46:14 fabiankeil - * Add SOCKS5 support. Patch #1862863 by Eric M. Hopper with minor changes. - * - * Revision 1.101 2007/12/07 18:29:23 fabiankeil - * Remove now-obsolete csp member x_forwarded. - * - * Revision 1.100 2007/09/02 13:42:11 fabiankeil - * - Allow port lists in url patterns. - * - Ditch unused url_spec member pathlen. - * - * Revision 1.99 2007/07/21 11:51:36 fabiankeil - * As Hal noticed, checking dispatch_cgi() as the last cruncher - * looks like a bug if CGI requests are blocked unintentionally, - * so don't do it unless the user enabled the new config option - * "allow-cgi-request-crunching". - * - * Revision 1.98 2007/07/14 07:31:26 fabiankeil - * Add new csp->content_type flag (CT_DECLARED). - * - * Revision 1.97 2007/05/27 12:38:08 fabiankeil - * - Remove some left-overs from the switch to dedicated header filters. - * - Adjust "X-Filter: No" to disable dedicated header filters. - * - Prepare for forward-override{} - * - * Revision 1.96 2007/05/14 10:41:15 fabiankeil - * Ditch the csp member cookie_list[] which isn't used anymore. - * - * Revision 1.95 2007/04/30 15:02:19 fabiankeil - * Introduce dynamic pcrs jobs that can resolve variables. - * - * Revision 1.94 2007/04/15 16:39:21 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.93 2007/03/20 15:16:34 fabiankeil - * Use dedicated header filter actions instead of abusing "filter". - * Replace "filter-client-headers" and "filter-client-headers" - * with "server-header-filter" and "client-header-filter". - * - * Revision 1.92 2007/03/17 15:20:05 fabiankeil - * New config option: enforce-blocks. - * - * Revision 1.91 2007/03/05 13:28:03 fabiankeil - * Add some CSP_FLAGs for the header parsers. - * - * Revision 1.90 2007/02/07 10:36:16 fabiankeil - * Add new http_response member to save - * the reason why the response was generated. - * - * Revision 1.89 2007/01/27 13:09:16 fabiankeil - * Add new config option "templdir" to - * change the templates directory. - * - * Revision 1.88 2007/01/25 13:36:59 fabiankeil - * Add csp->error_message for failure reasons - * that should be embedded into the CGI pages. - * - * Revision 1.87 2007/01/01 19:36:37 fabiankeil - * Integrate a modified version of Wil Mahan's - * zlib patch (PR #895531). - * - * Revision 1.86 2006/12/31 17:56:37 fabiankeil - * Added config option accept-intercepted-requests - * and disabled it by default. - * - * Revision 1.85 2006/12/31 15:03:31 fabiankeil - * Fix gcc43 compiler warnings and a comment. - * - * Revision 1.84 2006/12/21 12:57:48 fabiankeil - * Add config option "split-large-forms" - * to work around the browser bug reported - * in BR #1570678. - * - * Revision 1.83 2006/12/06 19:26:29 fabiankeil - * Moved HTTP snipplets into jcc.c. They aren't - * used anywhere else. - * - * Revision 1.82 2006/09/20 15:50:31 fabiankeil - * Doubled size of HOSTENT_BUFFER_SIZE to mask - * problems with gethostbyname_r and some - * /etc/hosts configurations. Only a workaround - * until we get the real fix ready. - * Thanks Félix Rauch for reporting. - * - * Increased value of MAX_TRUSTED_REFERRERS from 64 to 512. - * - * Revision 1.81 2006/09/06 13:03:04 fabiankeil - * Respond with 400 and a short text message - * if the client tries to use Privoxy as FTP proxy. - * - * Revision 1.80 2006/09/06 10:43:32 fabiankeil - * Added config option enable-remote-http-toggle - * to specify if Privoxy should recognize special - * headers (currently only X-Filter) to change its - * behaviour. Disabled by default. - * - * Revision 1.79 2006/09/06 09:23:37 fabiankeil - * Make number of retries in case of forwarded-connect problems - * a config file option (forwarded-connect-retries) and use 0 as - * default. - * - * Revision 1.78 2006/08/31 16:25:06 fabiankeil - * Work around a buffer overflow that caused Privoxy to - * segfault if too many trusted referrers were used. Good - * enough for now, but should be replaced with a real - * solution after the next release. - * - * Revision 1.77 2006/08/21 12:50:51 david__schmidt - * Formatting cleanup - * - * Revision 1.76 2006/08/14 08:25:19 fabiankeil - * Split filter-headers{} into filter-client-headers{} - * and filter-server-headers{}. - * Added parse_header_time() to share some code. - * Replaced timegm() with mktime(). - * - * Revision 1.75 2006/08/03 02:46:41 david__schmidt - * Incorporate Fabian Keil's patch work: * http://www.fabiankeil.de/sourcecode/privoxy/ - * - * Revision 1.74 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.72.2.7 2006/01/29 23:10:56 david__schmidt - * Multiple filter file support - * - * Revision 1.72.2.6 2004/10/03 12:53:46 david__schmidt - * Add the ability to check jpeg images for invalid - * lengths of comment blocks. Defensive strategy - * against the exploit: - * Microsoft Security Bulletin MS04-028 - * Buffer Overrun in JPEG Processing (GDI+) Could - * Allow Code Execution (833987) - * Enabled with +inspect-jpegs in actions files. - * - * Revision 1.72.2.5 2004/01/30 15:29:29 oes - * Updated the copyright note - * - * Revision 1.72.2.4 2004/01/13 16:12:14 oes - * Fixed double slash in USER_MANUAL_URL. Closes BR #867088. - * - * Revision 1.72.2.3 2003/03/11 11:54:37 oes - * Introduced RC_FLAG_* flags for use in child process return code - * - * Revision 1.72.2.2 2002/11/28 18:15:44 oes - * Added flag to each cgi_dispatcher that allows or denies - * external linking and removed const qualifier from - * struct list_entry.str. - * - * Revision 1.72.2.1 2002/08/10 11:25:18 oes - * - Include config.h for access to config data - * - Include <pcre*.h> depending on where they are - * - * Revision 1.72 2002/05/14 21:35:49 oes - * Split HELP_LINK_PREFIX into ACTIONS_HELP_PREFIX and CONFIG_HELP_PREFIX - * because of split in user-manual - * - * Revision 1.71 2002/05/12 21:39:36 jongfoster - * - Adding Doxygen-style comments to structures and #defines. - * - * Revision 1.70 2002/05/12 16:05:50 jongfoster - * Fixing ACTION_MASK_ALL to be unsigned long rather than - * just unsigned int. I don't know if anyone is porting - * Privoxy to 16-bit platforms, but if so, +limit-connect - * wouldn't have worked because of this bug. - * - * Revision 1.69 2002/05/08 16:00:16 oes - * Added size member to struct iob, so it can - * be alloced larger than needed. - * - * Revision 1.68 2002/04/26 12:56:00 oes - * Killed REDIRECT_URL, added USER_MANUAL_URL and HELP_LINK_PREFIX - * - * Revision 1.67 2002/04/24 02:12:43 oes - * - Jon's multiple AF patch: - * - Make csp->actions_list an array - * - #define MAX_AF_FILES - * - Moved CGI_PARAM_LEN_MAX (500) here - * - * Revision 1.66 2002/04/15 19:06:43 jongfoster - * Typos - * - * Revision 1.65 2002/04/04 00:36:36 gliptak - * always use pcre for matching - * - * Revision 1.64 2002/04/03 22:28:03 gliptak - * Removed references to gnu_regex - * - * Revision 1.63 2002/03/31 17:19:00 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.62 2002/03/26 22:48:49 swa - * new homepage url - * - * Revision 1.61 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.60 2002/03/24 15:52:17 jongfoster - * Changing CGI URL prefixes for new name - * - * Revision 1.59 2002/03/24 15:23:33 jongfoster - * Name changes - * - * Revision 1.58 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.57 2002/03/16 20:28:34 oes - * Added descriptions to the filters so users will know what they select in the cgi editor - * - * Revision 1.56 2002/03/13 20:27:30 oes - * Fixing bug with CT_TABOO - * - * Revision 1.55 2002/03/12 01:42:50 oes - * Introduced modular filters - * - * Revision 1.54 2002/03/09 20:03:52 jongfoster - * - Making various functions return int rather than size_t. - * (Undoing a recent change). Since size_t is unsigned on - * Windows, functions like read_socket that return -1 on - * error cannot return a size_t. - * - * THIS WAS A MAJOR BUG - it caused frequent, unpredictable - * crashes, and also frequently caused JB to jump to 100% - * CPU and stay there. (Because it thought it had just - * read ((unsigned)-1) == 4Gb of data...) - * - * - The signature of write_socket has changed, it now simply - * returns success=0/failure=nonzero. - * - * - Trying to get rid of a few warnings --with-debug on - * Windows, I've introduced a new type "jb_socket". This is - * used for the socket file descriptors. On Windows, this - * is SOCKET (a typedef for unsigned). Everywhere else, it's - * an int. The error value can't be -1 any more, so it's - * now JB_INVALID_SOCKET (which is -1 on UNIX, and in - * Windows it maps to the #define INVALID_SOCKET.) - * - * - The signature of bind_port has changed. - * - * Revision 1.53 2002/03/08 16:48:55 oes - * Added FEATURE_NO_GIFS and BUILTIN_IMAGE_MIMETYPE - * - * Revision 1.52 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.51 2002/03/05 04:52:42 oes - * Deleted non-errlog debugging code - * - * Revision 1.50 2002/03/04 19:32:07 oes - * Changed default port to 8118 - * - * Revision 1.49 2002/03/04 18:28:55 oes - * Deleted PID_FILE_NAME - * - * Revision 1.48 2002/03/03 14:50:40 oes - * Fixed CLF logging: Added ocmd member for client's request to struct http_request - * - * Revision 1.47 2002/02/20 23:15:13 jongfoster - * Parsing functions now handle out-of-memory gracefully by returning - * an error code. - * - * Revision 1.46 2002/01/17 21:06:09 jongfoster - * Now #defining the URLs of the config interface - * - * Minor changes to struct http_request and struct url_spec due to - * standardizing that struct http_request is used to represent a URL, and - * struct url_spec is used to represent a URL pattern. (Before, URLs were - * represented as seperate variables and a partially-filled-in url_spec). - * - * Revision 1.45 2002/01/09 14:33:27 oes - * Added HOSTENT_BUFFER_SIZE - * - * Revision 1.44 2001/12/30 14:07:32 steudten - * - Add signal handling (unix) - * - Add SIGHUP handler (unix) - * - Add creation of pidfile (unix) - * - Add action 'top' in rc file (RH) - * - Add entry 'SIGNALS' to manpage - * - Add exit message to logfile (unix) - * - * Revision 1.43 2001/11/22 21:57:51 jongfoster - * Making action_spec->flags into an unsigned long rather than just an - * unsigned int. - * Adding ACTION_NO_COOKIE_KEEP - * - * Revision 1.42 2001/11/05 21:42:41 steudten - * Include DBG() macro. - * - * Revision 1.41 2001/10/28 19:12:06 jongfoster - * Adding ijb_toupper() - * - * Revision 1.40 2001/10/26 17:40:47 oes - * Moved ijb_isspace and ijb_tolower to project.h - * Removed http->user_agent, csp->referrer and csp->accept_types - * - * Revision 1.39 2001/10/25 03:45:02 david__schmidt - * Adding a (void*) cast to freez() because Visual Age C++ won't expand the - * macro when called with a cast; so moving the cast to the macro def'n - * seems to both eliminate compiler warnings (on darwin and OS/2, anyway) and - * doesn't make macro expansion complain. Hope this works for everyone else - * too... - * - * Revision 1.38 2001/10/23 21:19:04 jongfoster - * New error-handling support: jb_err type and JB_ERR_xxx constants - * CGI functions now return a jb_err, and their parameters map is const. - * Support for RUNTIME_FEATUREs to enable/disable config editor - * Adding a few comments - * - * Revision 1.37 2001/10/14 22:14:01 jongfoster - * Removing name_length field from struct cgi_dispatcher, as this is - * now calculated at runtime from the "name" field. - * - * Revision 1.36 2001/10/10 16:45:15 oes - * Added LIMIT_CONNECT action and string - * Fixed HTTP message line termination - * Added CFORBIDDEN HTTP message - * - * Revision 1.35 2001/10/07 18:06:43 oes - * Added status member to struct http_request - * - * Revision 1.34 2001/10/07 15:45:25 oes - * Added url member to struct http_request and commented all - * members - * - * Added CT_TABOO - * - * Added ACTION_DOWNGRADE and ACTION_NO_COMPRESSION - * - * Replaced struct client_state members rejected, - * force, active and toggled_on with "flags" bitmap. - * - * Added CSP_FLAG_MODIFIED and CSP_FLAG_CHUNKED - * - * Added buffer_limit to struct configuration_spec - * - * Revision 1.33 2001/09/20 13:30:08 steudten - * - * Make freez() more secure in case of: if (exp) { free(z) ; a=*z } - * Last case will set z to NULL in free(z) and thats bad.. - * - * Revision 1.32 2001/09/16 23:02:51 jongfoster - * Fixing warning - * - * Revision 1.31 2001/09/16 13:20:29 jongfoster - * Rewrite of list library. Now has seperate header and list_entry - * structures. Also added a large sprinking of assert()s to the list - * code. - * - * Revision 1.30 2001/09/13 23:52:00 jongfoster - * Support for both static and dynamically generated CGI pages - * - * Revision 1.29 2001/09/13 23:29:43 jongfoster - * Defining FORWARD_SPEC_INITIALIZER - * - * Revision 1.28 2001/09/13 23:05:50 jongfoster - * Changing the string paramater to the header parsers a "const". - * - * Revision 1.27 2001/08/05 16:06:20 jongfoster - * Modifiying "struct map" so that there are now separate header and - * "map_entry" structures. This means that functions which modify a - * map no longer need to return a pointer to the modified map. - * Also, it no longer reverses the order of the entries (which may be - * important with some advanced template substitutions). - * - * Revision 1.26 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.25 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.24 2001/07/25 17:20:27 oes - * Introduced http->user_agent - * - * Revision 1.23 2001/07/18 12:32:23 oes - * - Added ACTION_STRING_DEANIMATE - * - moved #define freez from jcc.h to project.h - * - * Revision 1.22 2001/07/15 17:51:41 jongfoster - * Renaming #define STATIC to STATIC_PCRE - * - * Revision 1.21 2001/07/13 14:03:19 oes - * - Reorganized regex header inclusion and #defines to - * comply to the scheme in configure.in - * - Added csp->content_type and its CT_* keys - * - Added ACTION_DEANIMATE - * - Removed all #ifdef PCRS - * - * Revision 1.20 2001/06/29 21:45:41 oes - * Indentation, CRLF->LF, Tab-> Space - * - * Revision 1.19 2001/06/29 13:33:36 oes - * - Improved comments - * - Introduced http_request.host_ip_addr_str - * - Introduced http_response.head_length - * - Introduced config.my_ip_addr_str, config.my_hostname, - * config.admin_address and config.proxy_info_url - * - Removed config.proxy_args_header and config.proxy_args_trailer, - * renamed config.proxy_args_invocation to config.proxy_args - * - Removed HTML snipplets and GIFs - * - Removed logentry from cancelled commit - * - * Revision 1.18 2001/06/09 10:57:39 jongfoster - * Adding definition of BUFFER_SIZE. - * Changing struct cgi_dispatcher to use "const" strings. - * - * Revision 1.17 2001/06/07 23:15:09 jongfoster - * Merging ACL and forward files into config file. - * Moving struct gateway members into struct forward_spec - * Removing config->proxy_args_gateways - * Cosmetic: Adding a few comments - * - * Revision 1.16 2001/06/04 18:31:58 swa - * files are now prefixed with either `confdir' or `logdir'. - * `make redhat-dist' replaces both entries confdir and logdir - * with redhat values - * - * Revision 1.15 2001/06/04 11:28:53 swa - * redirect did not work due to missing / - * - * Revision 1.14 2001/06/03 11:03:48 oes - * Added struct map, - * added struct http_response, - * changed struct interceptors to struct cgi_dispatcher, - * moved HTML stuff to cgi.h - * - * Revision 1.13 2001/06/01 20:05:36 jongfoster - * Support for +image-blocker{}: added ACTION_IMAGE_BLOCKER - * constant, and removed csp->tinygif. - * - * Revision 1.12 2001/06/01 18:49:17 jongfoster - * Replaced "list_share" with "list" - the tiny memory gain was not - * worth the extra complexity. - * - * Revision 1.11 2001/06/01 10:32:47 oes - * Added constants for anchoring selection bitmap - * - * Revision 1.10 2001/05/31 21:33:53 jongfoster - * Changes for new actions file, replacing permissionsfile - * and parts of the config file. Also added support for - * list_shared. - * - * Revision 1.9 2001/05/31 17:32:31 oes - * - * - Enhanced domain part globbing with infix and prefix asterisk - * matching and optional unanchored operation - * - * Revision 1.8 2001/05/29 20:09:15 joergs - * HTTP_REDIRECT_TEMPLATE fixed. - * - * Revision 1.7 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/actionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.6 2001/05/27 22:17:04 oes - * - * - re_process_buffer no longer writes the modified buffer - * to the client, which was very ugly. It now returns the - * buffer, which it is then written by chat. - * - * - content_length now adjusts the Content-Length: header - * for modified documents rather than crunch()ing it. - * (Length info in csp->content_length, which is 0 for - * unmodified documents) - * - * - For this to work, sed() is called twice when filtering. - * - * Revision 1.5 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.4 2001/05/22 18:46:04 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Some minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.3 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "actionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.2 2001/05/17 23:01:01 oes - * - Cleaned CRLF's from the sources and related files - * - * Revision 1.1.1.1 2001/05/15 13:59:03 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -/* Declare struct FILE for vars and funcs. */ -#include <stdio.h> - -/* Need time_t for file_list */ -#include <time.h> -/* Needed for pcre choice */ -#include "config.h" - -/* - * Include appropriate regular expression libraries. - * Note that pcrs and pcre (native) are needed for cgi - * and are included anyway. - */ - -#ifdef STATIC_PCRE -# include "pcre.h" -#else -# ifdef PCRE_H_IN_SUBDIR -# include <pcre/pcre.h> -# else -# include <pcre.h> -# endif -#endif - -#ifdef STATIC_PCRS -# include "pcrs.h" -#else -# include <pcrs.h> -#endif - -#ifdef STATIC_PCRE -# include "pcreposix.h" -#else -# ifdef PCRE_H_IN_SUBDIR -# include <pcre/pcreposix.h> -# else -# include <pcreposix.h> -# endif -#endif - -#ifdef AMIGA -#include "amiga.h" -#endif /* def AMIGA */ - -#ifdef _WIN32 -/* - * I don't want to have to #include all this just for the declaration - * of SOCKET. However, it looks like we have to... - */ -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> -#endif - - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef _WIN32 - -typedef SOCKET jb_socket; - -#define JB_INVALID_SOCKET INVALID_SOCKET - -#else /* ndef _WIN32 */ - -/** - * The type used by sockets. On UNIX it's an int. Microsoft decided to - * make it an unsigned. - */ -typedef int jb_socket; - -/** - * The error value used for variables of type jb_socket. On UNIX this - * is -1, however Microsoft decided to make socket handles unsigned, so - * they use a different value. - */ - -#define JB_INVALID_SOCKET (-1) - -#endif /* ndef _WIN32 */ - - -/** - * A standard error code. This should be JB_ERR_OK or one of the JB_ERR_xxx - * series of errors. - */ -typedef int jb_err; - -#define JB_ERR_OK 0 /**< Success, no error */ -#define JB_ERR_MEMORY 1 /**< Out of memory */ -#define JB_ERR_CGI_PARAMS 2 /**< Missing or corrupt CGI parameters */ -#define JB_ERR_FILE 3 /**< Error opening, reading or writing a file */ -#define JB_ERR_PARSE 4 /**< Error parsing file */ -#define JB_ERR_MODIFIED 5 /**< File has been modified outside of the - CGI actions editor. */ -#define JB_ERR_COMPRESS 6 /**< Error on decompression */ - -/** - * This macro is used to free a pointer that may be NULL. - * It also sets the variable to NULL after it's been freed. - * The paramater should be a simple variable without side effects. - */ -#define freez(X) { if(X) { free((void*)X); X = NULL ; } } - - -/** - * Fix a problem with Solaris. There should be no effect on other - * platforms. - * - * Solaris's isspace() is a macro which uses it's argument directly - * as an array index. Therefore we need to make sure that high-bit - * characters generate +ve values, and ideally we also want to make - * the argument match the declared parameter type of "int". - * - * Note: Remember to #include <ctype.h> if you use these macros. - */ -#define ijb_toupper(__X) toupper((int)(unsigned char)(__X)) -#define ijb_tolower(__X) tolower((int)(unsigned char)(__X)) -#define ijb_isspace(__X) isspace((int)(unsigned char)(__X)) - -/** - * Use for statically allocated buffers if you have no other choice. - * Remember to check the length of what you write into the buffer - * - we don't want any buffer overflows! - */ -#define BUFFER_SIZE 5000 - -/** - * Max length of CGI parameters (arbitrary limit). - */ -#define CGI_PARAM_LEN_MAX 500U - -/** - * Buffer size for capturing struct hostent data in the - * gethostby(name|addr)_r library calls. Since we don't - * loop over gethostbyname_r, the buffer must be sufficient - * to accomodate multiple IN A RRs, as used in DNS round robin - * load balancing. W3C's wwwlib uses 1K, so that should be - * good enough for us, too. - */ -/** - * XXX: Temporary doubled, for some configurations - * 1K is still too small and we didn't get the - * real fix ready for inclusion. - */ -#define HOSTENT_BUFFER_SIZE 2048 - -/** - * Do not use. Originally this was so that you can - * say "while (FOREVER) { ...do something... }". - * However, this gives a warning with some compilers (e.g. VC++). - * Instead, use "for (;;) { ...do something... }". - */ -#define FOREVER 1 - -/** - * Default IP address to listen on, as a string. - * Set to "127.0.0.1". - */ -#define HADDR_DEFAULT "127.0.0.1" - -/** - * Default port to listen on, as a number. - * Set to 8118. - */ -#define HADDR_PORT 8118 - - -/* Forward def for struct client_state */ -struct configuration_spec; - - -/** - * Entry in a linked list of strings. - */ -struct list_entry -{ - /** - * The string pointer. It must point to a dynamically malloc()ed - * string or be NULL for the list functions to work. In the latter - * case, just be careful next time you iterate through the list in - * your own code. - */ - char *str; - - /** Next entry in the linked list, or NULL if no more. */ - struct list_entry *next; -}; - -/** - * A header for a linked list of strings. - */ -struct list -{ - /** First entry in the list, or NULL if the list is empty. */ - struct list_entry *first; - - /** Last entry in the list, or NULL if the list is empty. */ - struct list_entry *last; -}; - - -/** - * An entry in a map. This is a name=value pair. - */ -struct map_entry -{ - /** The key for the map. */ - const char *name; - /** The value associated with that key. */ - const char *value; - /** The next map entry, or NULL if none. */ - struct map_entry *next; -}; - -/** - * A map from a string to another string. - * This is used for the paramaters passed in a HTTP GET request, and - * to store the exports when the CGI interface is filling in a template. - */ -struct map -{ - /** The first map entry, or NULL if the map is empty. */ - struct map_entry *first; - /** The last map entry, or NULL if the map is empty. */ - struct map_entry *last; -}; - - -/** - * A HTTP request. This includes the method (GET, POST) and - * the parsed URL. - * - * This is also used whenever we want to match a URL against a - * URL pattern. This always contains the URL to match, and never - * a URL pattern. (See struct url_spec). - */ -struct http_request -{ - char *cmd; /**< Whole command line: method, URL, Version */ - char *ocmd; /**< Backup of original cmd for CLF logging */ - char *gpc; /**< HTTP method: GET, POST, ... */ - char *url; /**< The URL */ - char *ver; /**< Protocol version */ - int status; /**< HTTP Status */ - - char *host; /**< Host part of URL */ - int port; /**< Port of URL or 80 (default) */ - char *path; /**< Path of URL */ - char *hostport; /**< host[:port] */ - int ssl; /**< Flag if protocol is https */ - - char *host_ip_addr_str; /**< String with dotted decimal representation - of host's IP. NULL before connect_to() */ - - char *dbuffer; /**< Buffer with '\0'-delimited domain name. */ - char **dvec; /**< List of pointers to the strings in dbuffer. */ - int dcount; /**< How many parts to this domain? (length of dvec) */ -}; - -/** - * Reasons for generating a http_response instead of delivering - * the requested resource. Mostly ordered the way they are checked - * for in chat(). - */ -#define RSP_REASON_UNSUPPORTED 1 -#define RSP_REASON_BLOCKED 2 -#define RSP_REASON_UNTRUSTED 3 -#define RSP_REASON_REDIRECTED 4 -#define RSP_REASON_CGI_CALL 5 -#define RSP_REASON_NO_SUCH_DOMAIN 6 -#define RSP_REASON_FORWARDING_FAILED 7 -#define RSP_REASON_CONNECT_FAILED 8 -#define RSP_REASON_OUT_OF_MEMORY 9 -#define RSP_REASON_INTERNAL_ERROR 10 - -/** - * Response generated by CGI, blocker, or error handler - */ -struct http_response -{ - char *status; /**< HTTP status (string). */ - struct list headers[1]; /**< List of header lines. */ - char *head; /**< Formatted http response head. */ - size_t head_length; /**< Length of http response head. */ - char *body; /**< HTTP document body. */ - size_t content_length; /**< Length of body, REQUIRED if binary body. */ - int is_static; /**< Nonzero if the content will never change and - should be cached by the browser (e.g. images). */ - int reason; /**< Why the response was generated in the first place. */ -}; - -/** - * A URL or a tag pattern. - */ -struct url_spec -{ - /** The string which was parsed to produce this url_spec. - Used for debugging or display only. */ - char *spec; - -#ifdef FEATURE_EXTENDED_HOST_PATTERNS - regex_t *host_regex;/**< Regex for host matching */ -#else - char *dbuffer; /**< Buffer with '\0'-delimited domain name, or NULL to match all hosts. */ - char **dvec; /**< List of pointers to the strings in dbuffer. */ - int dcount; /**< How many parts to this domain? (length of dvec) */ - int unanchored; /**< Bitmap - flags are ANCHOR_LEFT and ANCHOR_RIGHT. */ -#endif /* defined FEATURE_EXTENDED_HOST_PATTERNS */ - - char *port_list; /**< List of acceptable ports, or NULL to match all ports */ - - regex_t *preg; /**< Regex for matching path part */ - regex_t *tag_regex; /**< Regex for matching tags */ -}; - -/** - * If you declare a static url_spec, this is the value to initialize it to zero. - */ -#ifndef FEATURE_EXTENDED_HOST_PATTERNS -#define URL_SPEC_INITIALIZER { NULL, NULL, NULL, 0, 0, NULL, NULL, NULL } -#else -#define URL_SPEC_INITIALIZER { NULL, NULL, NULL, NULL, NULL } -#endif /* def FEATURE_EXTENDED_HOST_PATTERNS */ - -/** - * Constant for host part matching in URLs. If set, indicates that the start of - * the pattern must match the start of the URL. E.g. this is not set for the - * pattern ".example.com", so that it will match both "example.com" and - * "www.example.com". It is set for the pattern "example.com", which makes it - * match "example.com" only, not "www.example.com". - */ -#define ANCHOR_LEFT 1 - -/** - * Constant for host part matching in URLs. If set, indicates that the end of - * the pattern must match the end of the URL. E.g. this is not set for the - * pattern "ad.", so that it will match any host called "ad", irrespective - * of how many subdomains are in the fully-qualified domain name. - */ -#define ANCHOR_RIGHT 2 - - -/** - * An I/O buffer. Holds a string which can be appended to, and can have data - * removed from the beginning. - */ -struct iob -{ - char *buf; /**< Start of buffer */ - char *cur; /**< Start of relevant data */ - char *eod; /**< End of relevant data */ - size_t size; /**< Size as malloc()ed */ -}; - - -/** - * Return the number of bytes in the I/O buffer associated with the passed - * client_state pointer. - * May be zero. - */ -#define IOB_PEEK(CSP) ((CSP->iob->cur > CSP->iob->eod) ? (CSP->iob->eod - CSP->iob->cur) : 0) - - -/** - * Remove any data in the I/O buffer associated with the passed - * client_state pointer. - */ -#define IOB_RESET(CSP) if(CSP->iob->buf) free(CSP->iob->buf); memset(CSP->iob, '\0', sizeof(CSP->iob)); - -/* Bits for csp->content_type bitmask: */ -#define CT_TEXT 0x0001U /**< Suitable for pcrs filtering. */ -#define CT_GIF 0x0002U /**< Suitable for GIF filtering. */ -#define CT_TABOO 0x0004U /**< DO NOT filter, irrespective of other flags. */ - -/* Although these are not, strictly speaking, content types - * (they are content encodings), it is simple to handle them - * as such. - */ -#define CT_GZIP 0x0010U /**< gzip-compressed data. */ -#define CT_DEFLATE 0x0020U /**< zlib-compressed data. */ - -/** - * Flag to signal that the server declared the content type, - * so we can differentiate between unknown and undeclared - * content types. - */ -#define CT_DECLARED 0x0040U - -/** - * The mask which includes all actions. - */ -#define ACTION_MASK_ALL (~0UL) - -/** - * The most compatible set of actions - i.e. none. - */ -#define ACTION_MOST_COMPATIBLE 0x00000000UL - -/** Action bitmap: Block the request. */ -#define ACTION_BLOCK 0x00000001UL -/** Action bitmap: Deanimate if it's a GIF. */ -#define ACTION_DEANIMATE 0x00000002UL -/** Action bitmap: Downgrade HTTP/1.1 to 1.0. */ -#define ACTION_DOWNGRADE 0x00000004UL -/** Action bitmap: Fast redirects. */ -#define ACTION_FAST_REDIRECTS 0x00000008UL -/** Action bitmap: Remove or add "X-Forwarded-For" header. */ -#define ACTION_CHANGE_X_FORWARDED_FOR 0x00000010UL -/** Action bitmap: Hide "From" header. */ -#define ACTION_HIDE_FROM 0x00000020UL -/** Action bitmap: Hide "Referer" header. (sic - follow HTTP, not English). */ -#define ACTION_HIDE_REFERER 0x00000040UL -/** Action bitmap: Hide "User-Agent" and similar headers. */ -#define ACTION_HIDE_USER_AGENT 0x00000080UL -/** Action bitmap: This is an image. */ -#define ACTION_IMAGE 0x00000100UL -/** Action bitmap: Sets the image blocker. */ -#define ACTION_IMAGE_BLOCKER 0x00000200UL -/** Action bitmap: Prevent compression. */ -#define ACTION_NO_COMPRESSION 0x00000400UL -/** Action bitmap: Change cookies to session only cookies. */ -#define ACTION_NO_COOKIE_KEEP 0x00000800UL -/** Action bitmap: Block rending cookies. */ -#define ACTION_NO_COOKIE_READ 0x00001000UL -/** Action bitmap: Block setting cookies. */ -#define ACTION_NO_COOKIE_SET 0x00002000UL -/** Action bitmap: Override the forward settings in the config file */ -#define ACTION_FORWARD_OVERRIDE 0x00004000UL -/** Action bitmap: Block as empty document */ -#define ACTION_HANDLE_AS_EMPTY_DOCUMENT 0x00008000UL -/** Action bitmap: Limit CONNECT requests to safe ports. */ -#define ACTION_LIMIT_CONNECT 0x00010000UL -/** Action bitmap: Redirect request. */ -#define ACTION_REDIRECT 0x00020000UL -/** Action bitmap: Crunch or modify "if-modified-since" header. */ -#define ACTION_HIDE_IF_MODIFIED_SINCE 0x00040000UL -/** Action bitmap: Overwrite Content-Type header. */ -#define ACTION_CONTENT_TYPE_OVERWRITE 0x00080000UL -/** Action bitmap: Crunch specified server header. */ -#define ACTION_CRUNCH_SERVER_HEADER 0x00100000UL -/** Action bitmap: Crunch specified client header */ -#define ACTION_CRUNCH_CLIENT_HEADER 0x00200000UL -/** Action bitmap: Enable text mode by force */ -#define ACTION_FORCE_TEXT_MODE 0x00400000UL -/** Action bitmap: Enable text mode by force */ -#define ACTION_CRUNCH_IF_NONE_MATCH 0x00800000UL -/** Action bitmap: Enable content-dispostion crunching */ -#define ACTION_HIDE_CONTENT_DISPOSITION 0x01000000UL -/** Action bitmap: Replace or block Last-Modified header */ -#define ACTION_OVERWRITE_LAST_MODIFIED 0x02000000UL -/** Action bitmap: Replace or block Accept-Language header */ -#define ACTION_HIDE_ACCEPT_LANGUAGE 0x04000000UL - - -/** Action string index: How to deanimate GIFs */ -#define ACTION_STRING_DEANIMATE 0 -/** Action string index: Replacement for "From:" header */ -#define ACTION_STRING_FROM 1 -/** Action string index: How to block images */ -#define ACTION_STRING_IMAGE_BLOCKER 2 -/** Action string index: Replacement for "Referer:" header */ -#define ACTION_STRING_REFERER 3 -/** Action string index: Replacement for "User-Agent:" header */ -#define ACTION_STRING_USER_AGENT 4 -/** Action string index: Legal CONNECT ports. */ -#define ACTION_STRING_LIMIT_CONNECT 5 -/** Action string index: Server headers containing this pattern are crunched*/ -#define ACTION_STRING_SERVER_HEADER 6 -/** Action string index: Client headers containing this pattern are crunched*/ -#define ACTION_STRING_CLIENT_HEADER 7 -/** Action string index: Replacement for the "Accept-Language:" header*/ -#define ACTION_STRING_LANGUAGE 8 -/** Action string index: Replacement for the "Content-Type:" header*/ -#define ACTION_STRING_CONTENT_TYPE 9 -/** Action string index: Replacement for the "content-dispostion:" header*/ -#define ACTION_STRING_CONTENT_DISPOSITION 10 -/** Action string index: Replacement for the "If-Modified-Since:" header*/ -#define ACTION_STRING_IF_MODIFIED_SINCE 11 -/** Action string index: Replacement for the "Last-Modified:" header. */ -#define ACTION_STRING_LAST_MODIFIED 12 -/** Action string index: Redirect URL */ -#define ACTION_STRING_REDIRECT 13 -/** Action string index: Decode before redirect? */ -#define ACTION_STRING_FAST_REDIRECTS 14 -/** Action string index: Overriding forward rule. */ -#define ACTION_STRING_FORWARD_OVERRIDE 15 -/** Action string index: Reason for the block. */ -#define ACTION_STRING_BLOCK 16 -/** Action string index: what to do with the "X-Forwarded-For" header. */ -#define ACTION_STRING_CHANGE_X_FORWARDED_FOR 17 -/** Number of string actions. */ -#define ACTION_STRING_COUNT 18 - - -/* To make the ugly hack in sed easier to understand */ -#define CHECK_EVERY_HEADER_REMAINING 0 - - -/** Index into current_action_spec::multi[] for headers to add. */ -#define ACTION_MULTI_ADD_HEADER 0 -/** Index into current_action_spec::multi[] for content filters to apply. */ -#define ACTION_MULTI_FILTER 1 -/** Index into current_action_spec::multi[] for server-header filters to apply. */ -#define ACTION_MULTI_SERVER_HEADER_FILTER 2 -/** Index into current_action_spec::multi[] for client-header filters to apply. */ -#define ACTION_MULTI_CLIENT_HEADER_FILTER 3 -/** Index into current_action_spec::multi[] for client-header tags to apply. */ -#define ACTION_MULTI_CLIENT_HEADER_TAGGER 4 -/** Index into current_action_spec::multi[] for server-header tags to apply. */ -#define ACTION_MULTI_SERVER_HEADER_TAGGER 5 -/** Number of multi-string actions. */ -#define ACTION_MULTI_COUNT 6 - - -/** - * This structure contains a list of actions to apply to a URL. - * It only contains positive instructions - no "-" options. - * It is not used to store the actions list itself, only for - * url_actions() to return the current values. - */ -struct current_action_spec -{ - /** Actions to apply. A bit set to "1" means perform the action. */ - unsigned long flags; - - /** - * Paramaters for those actions that require them. - * Each entry is valid if & only if the corresponding entry in "flags" is - * set. - */ - char * string[ACTION_STRING_COUNT]; - - /** Lists of strings for multi-string actions. */ - struct list multi[ACTION_MULTI_COUNT][1]; -}; - - -/** - * This structure contains a set of changes to actions. - * It can contain both positive and negative instructions. - * It is used to store an entry in the actions list. - */ -struct action_spec -{ - unsigned long mask; /**< Actions to keep. A bit set to "0" means remove action. */ - unsigned long add; /**< Actions to add. A bit set to "1" means add action. */ - - /** - * Paramaters for those actions that require them. - * Each entry is valid if & only if the corresponding entry in "flags" is - * set. - */ - char * string[ACTION_STRING_COUNT]; - - /** Lists of strings to remove, for multi-string actions. */ - struct list multi_remove[ACTION_MULTI_COUNT][1]; - - /** If nonzero, remove *all* strings from the multi-string action. */ - int multi_remove_all[ACTION_MULTI_COUNT]; - - /** Lists of strings to add, for multi-string actions. */ - struct list multi_add[ACTION_MULTI_COUNT][1]; -}; - - -/** - * This structure is used to store action files. - * - * It contains an URL or tag pattern, and the changes to - * the actions. It's a linked list and should only be - * free'd through unload_actions_file() unless there's - * only a single entry. - */ -struct url_actions -{ - struct url_spec url[1]; /**< The URL or tag pattern. */ - - struct action_spec *action; /**< Action settings that might be shared with - the list entry before or after the current - one and can't be free'd willy nilly. */ - - struct url_actions *next; /**< Next action section in file, or NULL. */ -}; - - -/* - * Flags for use in csp->flags - */ - -/** - * Flag for csp->flags: Set if this client is processing data. - * Cleared when the thread associated with this structure dies. - */ -#define CSP_FLAG_ACTIVE 0x01U - -/** - * Flag for csp->flags: Set if the server's reply is in "chunked" - * transfer encoding - */ -#define CSP_FLAG_CHUNKED 0x02U - -/** - * Flag for csp->flags: Set if this request was enforced, although it would - * normally have been blocked. - */ -#define CSP_FLAG_FORCED 0x04U - -/** - * Flag for csp->flags: Set if any modification to the body was done. - */ -#define CSP_FLAG_MODIFIED 0x08U - -/** - * Flag for csp->flags: Set if request was blocked. - */ -#define CSP_FLAG_REJECTED 0x10U - -/** - * Flag for csp->flags: Set if we are toggled on (FEATURE_TOGGLE). - */ -#define CSP_FLAG_TOGGLED_ON 0x20U - -/** - * Flag for csp->flags: Set if an acceptable Connection header - * is already set. - */ -#define CSP_FLAG_CLIENT_CONNECTION_HEADER_SET 0x00000040U - -/** - * Flag for csp->flags: Set if adding the 'Connection: close' header - * for the server isn't necessary. - */ -#define CSP_FLAG_SERVER_CONNECTION_CLOSE_SET 0x00000080U - -/** - * Flag for csp->flags: Signals header parsers whether they - * are parsing server or client headers. - */ -#define CSP_FLAG_CLIENT_HEADER_PARSING_DONE 0x00000100U - -/** - * Flag for csp->flags: Set if adding the Host: header - * isn't necessary. - */ -#define CSP_FLAG_HOST_HEADER_IS_SET 0x00000200U - -/** - * Flag for csp->flags: Set if filtering is disabled by X-Filter: No - * XXX: As we now have tags we might as well ditch this. - */ -#define CSP_FLAG_NO_FILTERING 0x00000400U - -/** - * Flag for csp->flags: Set the client IP has appended to - * an already existing X-Forwarded-For header in which case - * no new header has to be generated. - */ -#define CSP_FLAG_X_FORWARDED_FOR_APPENDED 0x00000800U - -/** - * Flag for csp->flags: Set if the server wants to keep - * the connection alive. - */ -#define CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE 0x00001000U - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE -/** - * Flag for csp->flags: Set if the server specified the - * content length. - */ -#define CSP_FLAG_CONTENT_LENGTH_SET 0x00002000U -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - -/* - * Flags for use in return codes of child processes - */ - -/** - * Flag for process return code: Set if exiting porcess has been toggled - * during its lifetime. - */ -#define RC_FLAG_TOGGLED 0x10 - -/** - * Flag for process return code: Set if exiting porcess has blocked its - * request. - */ -#define RC_FLAG_BLOCKED 0x20 - -/** - * Maximum number of actions/filter files. This limit is arbitrary - it's just used - * to size an array. - */ -#define MAX_AF_FILES 10 - -/** - * The state of a Privoxy processing thread. - */ -struct client_state -{ - /** The proxy's configuration */ - struct configuration_spec * config; - - /** The actions to perform on the current request */ - struct current_action_spec action[1]; - - /** socket to talk to client (web browser) */ - jb_socket cfd; - - /** socket to talk to server (web server or proxy) */ - jb_socket sfd; - - /** Multi-purpose flag container, see CSP_FLAG_* above */ - unsigned int flags; - - /** Client PC's IP address, as reported by the accept() function. - As a string. */ - char *ip_addr_str; - /** Client PC's IP address, as reported by the accept() function. - As a number. */ - unsigned long ip_addr_long; - - /** The URL that was requested */ - struct http_request http[1]; - - /* - * The final forwarding settings. - * XXX: Currently this is only used for forward-override, - * so we can free the space in sweep. - */ - struct forward_spec * fwd; - - /** An I/O buffer used for buffering data read from the network */ - struct iob iob[1]; - - /** List of all headers for this request */ - struct list headers[1]; - - /** List of all tags that apply to this request */ - struct list tags[1]; - - /** MIME-Type key, see CT_* above */ - unsigned int content_type; - - /** Actions files associated with this client */ - struct file_list *actions_list[MAX_AF_FILES]; - - /** pcrs job files. */ - struct file_list *rlist[MAX_AF_FILES]; - - /** Length after content modification. */ - unsigned long long content_length; - -#ifdef FEATURE_CONNECTION_KEEP_ALIVE - /** Expected length of content after which we - * should stop reading from the server socket. - */ - /* XXX: is this the right location? */ - unsigned long long expected_content_length; -#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */ - -#ifdef FEATURE_TRUST - - /** Trust file. */ - struct file_list *tlist; - -#endif /* def FEATURE_TRUST */ - - /** - * Failure reason to embedded in the CGI error page, - * or NULL. Currently only used for socks errors. - */ - char *error_message; - - /** Next thread in linked list. Only read or modify from the main thread! */ - struct client_state *next; -}; - - -/** - * A function to add a header - */ -typedef jb_err (*add_header_func_ptr)(struct client_state *); - -/** - * A function to process a header - */ -typedef jb_err (*parser_func_ptr )(struct client_state *, char **); - - -/** - * List of available CGI functions. - */ -struct cgi_dispatcher -{ - /** The URL of the CGI, relative to the CGI root. */ - const char * const name; - - /** The handler function for the CGI */ - jb_err (* const handler)(struct client_state *csp, struct http_response *rsp, const struct map *parameters); - - /** The description of the CGI, to appear on the main menu, or NULL to hide it. */ - const char * const description; - - /** A flag that indicates whether unintentional calls to this CGI can cause damage */ - int harmless; -}; - - -/** - * A data file used by Privoxy. Kept in a linked list. - */ -struct file_list -{ - /** - * This is a pointer to the data structures associated with the file. - * Read-only once the structure has been created. - */ - void *f; - - /** - * The unloader function. - * Normally NULL. When we are finished with file (i.e. when we have - * loaded a new one), set to a pointer to an unloader function. - * Unloader will be called by sweep() (called from main loop) when - * all clients using this file are done. This prevents threading - * problems. - */ - void (*unloader)(void *); - - /** - * Used internally by sweep(). Do not access from elsewhere. - */ - int active; - - /** - * File last-modified time, so we can check if file has been changed. - * Read-only once the structure has been created. - */ - time_t lastmodified; - - /** - * The full filename. - */ - char * filename; - - /** - * Pointer to next entry in the linked list of all "file_list"s. - * This linked list is so that sweep() can navigate it. - * Since sweep() can remove items from the list, we must be careful - * to only access this value from main thread (when we know sweep - * won't be running). - */ - struct file_list *next; -}; - - -#ifdef FEATURE_TRUST - -/** - * The format of a trust file when loaded into memory. - */ -struct block_spec -{ - struct url_spec url[1]; /**< The URL pattern */ - int reject; /**< FIXME: Please document this! */ - struct block_spec *next; /**< Next entry in linked list */ -}; - -/** - * Arbitrary limit for the number of trusted referrers. - */ -#define MAX_TRUSTED_REFERRERS 512 - -#endif /* def FEATURE_TRUST */ - - -#define SOCKS_NONE 0 /**< Don't use a SOCKS server */ -#define SOCKS_4 40 /**< original SOCKS 4 protocol */ -#define SOCKS_4A 41 /**< as modified for hosts w/o external DNS */ -#define SOCKS_5 50 /**< as modified for hosts w/o external DNS */ - - -/** - * How to forward a connection to a parent proxy. - */ -struct forward_spec -{ - /** URL pattern that this forward_spec is for. */ - struct url_spec url[1]; - - /** Connection type. Must be SOCKS_NONE, SOCKS_4, SOCKS_4A or SOCKS_5. */ - int type; - - /** SOCKS server hostname. Only valid if "type" is SOCKS_4 or SOCKS_4A. */ - char *gateway_host; - - /** SOCKS server port. */ - int gateway_port; - - /** Parent HTTP proxy hostname, or NULL for none. */ - char *forward_host; - - /** Parent HTTP proxy port. */ - int forward_port; - - /** Next entry in the linked list. */ - struct forward_spec *next; -}; - - -/** - * Initializer for a static struct forward_spec. - */ -#define FORWARD_SPEC_INITIALIZER { { URL_SPEC_INITIALIZER }, 0, NULL, 0, NULL, 0, NULL } - -/* Supported filter types */ -#define FT_CONTENT_FILTER 0 -#define FT_CLIENT_HEADER_FILTER 1 -#define FT_SERVER_HEADER_FILTER 2 -#define FT_CLIENT_HEADER_TAGGER 3 -#define FT_SERVER_HEADER_TAGGER 4 - -#define MAX_FILTER_TYPES 5 - -/** - * This struct represents one filter (one block) from - * the re_filterfile. If there is more than one filter - * in the file, the file will be represented by a - * chained list of re_filterfile specs. - */ -struct re_filterfile_spec -{ - char *name; /**< Name from FILTER: statement in re_filterfile. */ - char *description; /**< Description from FILTER: statement in re_filterfile. */ - struct list patterns[1]; /**< The patterns from the re_filterfile. */ - pcrs_job *joblist; /**< The resulting compiled pcrs_jobs. */ - int type; /**< Filter type (content, client-header, server-header). */ - int dynamic; /**< Set to one if the pattern might contain variables - and has to be recompiled for every request. */ - struct re_filterfile_spec *next; /**< The pointer for chaining. */ -}; - - -#ifdef FEATURE_ACL - -#define ACL_PERMIT 1 /**< Accept connection request */ -#define ACL_DENY 2 /**< Reject connection request */ - -/** - * An IP address pattern. Used to specify networks in the ACL. - */ -struct access_control_addr -{ - unsigned long addr; /**< The IP address as an integer. */ - unsigned long mask; /**< The network mask as an integer. */ - unsigned long port; /**< The port number. */ -}; - -/** - * An access control list (ACL) entry. - * - * This is a linked list. - */ -struct access_control_list -{ - struct access_control_addr src[1]; /**< Client IP address */ - struct access_control_addr dst[1]; /**< Website or parent proxy IP address */ - - short action; /**< ACL_PERMIT or ACL_DENY */ - struct access_control_list *next; /**< The next entry in the ACL. */ -}; - -#endif /* def FEATURE_ACL */ - - -/** Maximum number of loaders (actions, re_filter, ...) */ -#define NLOADERS 8 - - -/** configuration_spec::feature_flags: CGI actions editor. */ -#define RUNTIME_FEATURE_CGI_EDIT_ACTIONS 1U - -/** configuration_spec::feature_flags: Web-based toggle. */ -#define RUNTIME_FEATURE_CGI_TOGGLE 2U - -/** configuration_spec::feature_flags: HTTP-header-based toggle. */ -#define RUNTIME_FEATURE_HTTP_TOGGLE 4U - -/** configuration_spec::feature_flags: Split large forms to limit the number of GET arguments. */ -#define RUNTIME_FEATURE_SPLIT_LARGE_FORMS 8U - -/** configuration_spec::feature_flags: Check the host header for requests with host-less request lines. */ -#define RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS 16U - -/** configuration_spec::feature_flags: Don't allow to circumvent blocks with the force prefix. */ -#define RUNTIME_FEATURE_ENFORCE_BLOCKS 32U - -/** configuration_spec::feature_flags: Allow to block or redirect CGI requests. */ -#define RUNTIME_FEATURE_CGI_CRUNCHING 64U - -/** configuration_spec::feature_flags: Try to keep the connection to the server alive. */ -#define RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE 128U - -/** - * Data loaded from the configuration file. - * - * (Anomaly: toggle is still handled through a global, not this structure) - */ -struct configuration_spec -{ - /** What to log */ - int debug; - - /** Nonzero to enable multithreading. */ - int multi_threaded; - - /** - * Bitmask of features that can be enabled/disabled through the config - * file. Currently defined bits: - * - * - RUNTIME_FEATURE_CGI_EDIT_ACTIONS - * - RUNTIME_FEATURE_CGI_TOGGLE - * - RUNTIME_FEATURE_HTTP_TOGGLE - * - RUNTIME_FEATURE_SPLIT_LARGE_FORMS - */ - unsigned feature_flags; - - /** The log file name. */ - const char *logfile; - - /** The config file directory. */ - const char *confdir; - - /** The directory for customized CGI templates. */ - const char *templdir; - - /** The log file directory. */ - const char *logdir; - - /** The full paths to the actions files. */ - const char *actions_file[MAX_AF_FILES]; - - /** The short names of the actions files. */ - const char *actions_file_short[MAX_AF_FILES]; - - /** The administrator's email address */ - char *admin_address; - - /** A URL with info on this proxy */ - char *proxy_info_url; - - /** URL to the user manual (on our website or local copy) */ - char *usermanual; - - /** The file names of the pcre filter files. */ - const char *re_filterfile[MAX_AF_FILES]; - - /** The short names of the pcre filter files. */ - const char *re_filterfile_short[MAX_AF_FILES]; - - /** The hostname to show on CGI pages, or NULL to use the real one. */ - const char *hostname; - - /** IP address to bind to. Defaults to HADDR_DEFAULT == 127.0.0.1. */ - const char *haddr; - - /** Port to bind to. Defaults to HADDR_PORT == 8118. */ - int hport; - - /** Size limit for IOB */ - size_t buffer_limit; - -#ifdef FEATURE_TRUST - - /** The file name of the trust file. */ - const char * trustfile; - - /** FIXME: DOCME: Document this. */ - struct list trust_info[1]; - - /** FIXME: DOCME: Document this. */ - struct url_spec *trust_list[MAX_TRUSTED_REFERRERS]; - -#endif /* def FEATURE_TRUST */ - -#ifdef FEATURE_ACL - - /** The access control list (ACL). */ - struct access_control_list *acl; - -#endif /* def FEATURE_ACL */ - - /** Information about parent proxies (forwarding). */ - struct forward_spec *forward; - - /** Number of retries in case a forwarded connection attempt fails */ - int forwarded_connect_retries; - - /* Timeout when waiting on sockets for data to become available. */ - int socket_timeout; - - /** All options from the config file, HTML-formatted. */ - char *proxy_args; - - /** The configuration file object. */ - struct file_list *config_file_list; - - /** List of loaders */ - int (*loaders[NLOADERS])(struct client_state *); - - /** Nonzero if we need to bind() to the new port. */ - int need_bind; -}; - -/** Calculates the number of elements in an array, using sizeof. */ -#define SZ(X) (sizeof(X) / sizeof(*X)) - -#ifdef FEATURE_FORCE_LOAD -/** The force load URL prefix. */ -#define FORCE_PREFIX "/PRIVOXY-FORCE" -#endif /* def FEATURE_FORCE_LOAD */ - -#ifdef FEATURE_NO_GIFS -/** The MIME type for images ("image/png" or "image/gif"). */ -#define BUILTIN_IMAGE_MIMETYPE "image/png" -#else -#define BUILTIN_IMAGE_MIMETYPE "image/gif" -#endif /* def FEATURE_NO_GIFS */ - - -/* - * Hardwired URLs - */ - -/** URL for the Privoxy home page. */ -#define HOME_PAGE_URL "http://www.privoxy.org/" - -/** URL for the Privoxy user manual. */ -#define USER_MANUAL_URL HOME_PAGE_URL VERSION "/user-manual/" - -/** Prefix for actions help links (append to USER_MANUAL_URL). */ -#define ACTIONS_HELP_PREFIX "actions-file.html#" - -/** Prefix for config option help links (append to USER_MANUAL_URL). */ -#define CONFIG_HELP_PREFIX "config.html#" - -/* - * The "hosts" to intercept and display CGI pages. - * First one is a hostname only, second one can specify host and path. - * - * Notes: - * 1) Do not specify the http: prefix - * 2) CGI_SITE_2_PATH must not end with /, one will be added automatically. - * 3) CGI_SITE_2_PATH must start with /, unless it is the empty string. - */ -#define CGI_SITE_1_HOST "p.p" -#define CGI_SITE_2_HOST "config.privoxy.org" -#define CGI_SITE_2_PATH "" - -/** - * The prefix for CGI pages. Written out in generated HTML. - * INCLUDES the trailing slash. - */ -#define CGI_PREFIX "http://" CGI_SITE_2_HOST CGI_SITE_2_PATH "/" - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef PROJECT_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/regression-tests.action b/external/privoxy/regression-tests.action deleted file mode 100644 index bf12a31..0000000 --- a/external/privoxy/regression-tests.action +++ /dev/null @@ -1,782 +0,0 @@ -############################################################################# -# $Id: regression-tests.action,v 1.22 2009/02/22 15:07:58 fabiankeil Exp $ -############################################################################# -# -# This is a configuration file for Privoxy-Regression-Test -# (included in the source tarball's tools directory). -# -# After referencing it in your Privoxy configuration both Privoxy and -# Privoxy-Regression-Test should be good to go. -# -############################################################################# -# -# Copyright (c) 2007-2009 Fabian Keil <fk(a)fabiankeil.de> -# -# Permission to use, copy, modify, and distribute this software for any -# purpose with or without fee is hereby granted, provided that the above -# copyright notice and this permission notice appear in all copies. -# -# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -# -############################################################################# - -{{settings}} -for-privoxy-version=3.0.11 - -# Some dependencies Privoxy-Regression-Test should know about: -# -# Level 9 needs = config line user-manual\s+(\.?\.?/|[A-Za-z]:) -# Level 12 needs = config line enable-edit-actions\s+1 -# Level 13 needs = feature status FEATURE_CONNECTION_KEEP_ALIVE Yes -# Level 14 needs = feature status FEATURE_CONNECTION_KEEP_ALIVE No - -####################################################### -# Enable taggers to activate the tests on demand -# and suppress hiding the User-Agent for -# Privoxy-Regression-Test to save log space. -####################################################### -{\ - +client-header-tagger{user-agent} \ - +client-header-tagger{privoxy-control} \ - +client-header-filter{privoxy-control} \ -} -config.privoxy.org/ -p.p/ -127.0.0.1/ - -{-hide-user-agent} -TAG:^User-Agent: Privoxy-Regression-Test - -####################################################### -# Test accept-language{}. -####################################################### - -# Set Header = Accept-Language: de-de -# Expect Header = Accept-Language: en-gb -{+hide-accept-language{en-gb}} -TAG:^hide-accept-language\{en-gb\}$ - -# Set Header = Accept-Language: de-de -# Expect Header = REMOVAL -{+hide-accept-language{block}} -TAG:^hide-accept-language\{block\}$ - -####################################################### -# Sections for hide-referrer{} to test: -# -# 1) conditional-block -# 2) conditional-forge -# 3) forge -# 4) block -# 5) a parameter that looks like a valid fake referrer -# 6) a parameter that looks like an invalid fake referrer -####################################################### - -# Set Header = Referer: http://www.example.org/foo -# Expect Header = REMOVAL -# -# Set Header = Referer: http://p.p/foo -# Expect Header = NO CHANGE -# -# Set Header = Referer: p.p/ -# Expect Header = REMOVAL -# -# Set Header = Referer: p -# Expect Header = REMOVAL -# -# Set Header = Referer: http:// -# Expect Header = REMOVAL -# -# Set Header = Referer: https://p.p/ -# Expect Header = REMOVAL -{+hide-referrer{conditional-block}} -TAG:^hide-referrer\{conditional-block\}$ - -# Set Header = Referer: http://www.example.org/foo -# Expect Header = Referer: http://p.p/ -# -# Set Header = Referer: http://p.p/foo -# Expect Header = NO CHANGE -# -# Set Header = Referer: p.p/ -# Expect Header = Referer: http://p.p/ -# -# Set Header = Referer: p -# Expect Header = Referer: http://p.p/ -# -# Set Header = Referer: http:// -# Expect Header = Referer: http://p.p/ -# -# Set Header = Referer: https://p.p/ -# Expect Header = Referer: http://p.p/ -{+hide-referrer{conditional-forge}} -TAG:^hide-referrer\{conditional-forge\}$ - -# Set Header = Referer: http://www.example.org/foo -# Expect Header = Referer: http://p.p/ -{+hide-referrer{forge}} -TAG:^hide-referrer\{forge\}$ - -# Set Header = Referer: http://www.example.org/foo -# Expect Header = REMOVAL -{+hide-referrer{block}} -TAG:^hide-referrer\{block\}$ - -# Set Header = Referer: http://www.example.org/foo -# Expect Header = Referer: invalid -{+hide-referrer{invalid}} -TAG:^hide-referrer\{invalid\}$ - -# Set Header = Referer: http://www.example.org/asdf -# Expect Header = Referer: http://www.privoxy.org/ -{+hide-referrer{http://www.privoxy.org/}} -TAG:^hide-referrer\{http://www.privoxy.org/\}$ - -#{+hide-referrer{}} -#TAG:^hide-referrer\{\}$ - -####################################################### -# Test hide-user-agent{}. -####################################################### - -# Set Header = User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; de-CH; rv:1.8.1.6) Gecko/20070806 Firefox/2.0.0.6 -# Expect Header = User-Agent: Mozilla/5.0 (X11; U; FreeBSD alpha; en-GB; rv:1.8.1.6) Gecko/20070913 Firefox/2.0.0.6 -{+hide-user-agent{Mozilla/5.0 (X11; U; FreeBSD alpha; en-GB; rv:1.8.1.6) Gecko/20070913 Firefox/2.0.0.6}} -TAG:^hide-user-agent\{Mozilla/5\.0 $X11; U; FreeBSD alpha; en-GB; rv:1\.8\.1\.6$ Gecko/20070913 Firefox/2\.0\.0\.6\}$ - -# XXX: Check the code that is tested here. -# Set Header = ua-blah: blah -# Expect Header = REMOVAL -{+hide-user-agent{block}} -TAG:^hide-user-agent{block}$ - -# Set Header = ua-blah: blah -# Expect Header = NO CHANGE -{-hide-user-agent{}} -TAG:^-hide-user-agent{block}$ - - -####################################################### -# Test add-header{}. -####################################################### - -# Set Header = X-Whatever: foo -# Expect Header = X-Custom-Header: yes, please - -{+add-header{X-Custom-Header: yes, please}} -TAG:^add-header\{X-Custom-Header: yes, please\}$ - -####################################################### -# Test client-header-filter{hide-tor-exit-notation}. -####################################################### - -# Set Header = Referer: http://p.p.zwiebelsuppe.exit/ -# Expect Header = Referer: http://p.p/ -# -# Set Header = Referer: http://p.p.zwiebelsuppe.exit/foo/bar/baaz/ -# Expect Header = Referer: http://p.p/foo/bar/baaz/ -# -# Set Header = Referer: http://p.p/ -# Expect Header = NO CHANGE -# -# Set Header = Referer: http://config.privoxy.org.zwiebelsuppe.exit/foo/bar/baaz.html -# Expect Header = Referer: http://config.privoxy.org/foo/bar/baaz.html -# -# Set Header = Host: p.p.zwiebelsuppe.exit -# Expect Header = Host: p.p -# -# Set Header = Host: p.p -# Expect Header = NO CHANGE -# -# Set Header = Referer: http://config.privoxy.org.ad356ef8e87a89e6c898b74500d58607ac691178.exit/foo… -# Expect Header = Referer: http://config.privoxy.org/foo/baaz.html - -{+client-header-filter{hide-tor-exit-notation} -hide-referer} -TAG:^client-header-filter\{hide-tor-exit-notation\}$ - -####################################################### -# Test crunch-client-header{}. -####################################################### - -# Set Header = Content-Type: text/html -# Expect Header = REMOVAL -# -# Set Header = Content-Type: text/html; charset=4711 -# Expect Header = REMOVAL -# -# Set Header = Content-Type: text/plain -# Expect Header = NO CHANGE - -{+crunch-client-header{text/html}} -TAG:^crunch-client-header\{text/plain\}$ - - -####################################################### -# Test crunch-if-none-match. -####################################################### - -# Set Header = If-None-Match: 8987afd239d2093kd2309kd -# Expect Header = REMOVAL - -# Set Header = If-None-Match: 82c3cb50c984ef11b1fed749949b2a16 -# Expect Header = REMOVAL - -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = NO CHANGE - -{+crunch-if-none-match -hide-if-modified-since} -TAG:^crunch-if-none-match$ - -####################################################### -# Test hide-if-modified-since -####################################################### - -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = REMOVAL -# -# Set Header = If-None-Match: 82c3cb50c984ef11b1fed749949b2a16 -# Expect Header = NO CHANGE - -{+hide-if-modified-since{block} -crunch-if-none-match} -TAG:^hide-if-modified-since\{block\}$ - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = REMOVAL -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = SOME CHANGE - -{+hide-if-modified-since{-60} -crunch-if-none-match} -TAG:^hide-if-modified-since\{-60\}$ - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = REMOVAL -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = SOME CHANGE - -{+hide-if-modified-since{+60} -crunch-if-none-match} -TAG:^hide-if-modified-since\{\+60\}$ - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = REMOVAL -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = SOME CHANGE - -{+hide-if-modified-since{60} -crunch-if-none-match} -TAG:^hide-if-modified-since\{60\}$ - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = REMOVAL -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = NO CHANGE - -{+hide-if-modified-since{+0} -crunch-if-none-match} -TAG:^hide-if-modified-since\{\+0\}$ - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = REMOVAL -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = NO CHANGE - -{+hide-if-modified-since{-0} -crunch-if-none-match} -TAG:^hide-if-modified-since\{-0\}$ - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = REMOVAL -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = NO CHANGE - -{+hide-if-modified-since{0} -crunch-if-none-match} -TAG:^hide-if-modified-since\{0\}$ - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = REMOVAL -# Set Header = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT -# Expect Header = NO CHANGE - -{+hide-if-modified-since{NaN} -crunch-if-none-match} -TAG:^hide-if-modified-since\{NaN\}$ - - -####################################################### -# Test crunch-outgoing-cookies -####################################################### - -# Set Header = If-Modified-Since: Gee, this date is invalid -# Expect Header = NO CHANGE -# -# Set Header = Cookie: PREF=ID=6cf0abd34262:TM=117335617:LM=1617:S=jZypyJ7LPiwFi1_ -# Expect Header = REMOVAL -{\ - +crunch-outgoing-cookies \ - -crunch-incoming-cookies \ - -session-cookies-only \ - -hide-if-modified-since \ -} -TAG:^crunch-outgoing-cookies$ - -####################################################### -# Test session-cookies-only -# -# XXX: pretty useless as session-cookies-only doesn't -# affect client headers. -####################################################### - -# Set Header = Cookie: NSC_gffe-iuuq-mc-wtfswfs=8efb330d3660;expires=Thu, 04-Oct-07 19:11:34 GMT;path=/ -# Expect Header = NO CHANGE -# -# Set Header = Cookie: PREF=ID=6cf0abd34262:TM=117335617:LM=1617:S=jZypyJ7LPiwFi1_ -# Expect Header = NO CHANGE -{\ - -crunch-outgoing-cookies \ - -crunch-incoming-cookies \ - +session-cookies-only \ - -hide-if-modified-since \ -} -TAG:^session-cookies-only$ - -####################################################### -# Test change-x-forwarded-for -####################################################### - -# Set Header = X-Forwarded-For: 10.0.0.1 -# Expect Header = NO CHANGE -{\ - -change-x-forwarded-for \ -} -TAG:^-change-x-forwarded-for$ - -# Set Header = X-Forwarded-For: 10.0.0.1 -# Expect Header = REMOVAL -{\ - +change-x-forwarded-for{block} \ -} -TAG:^change-x-forwarded-for\{block\}$ - -# Set Header = X-Forwarded-For: 10.0.0.1 -# Expect Header = SOME CHANGE -{\ - +change-x-forwarded-for{add} \ -} -TAG:^change-x-forwarded-for\{add\}$ - -####################################################### -# Test hide-from-header -####################################################### - -# Set Header = From: schneewitchen(a)example.org -# Expect Header = REMOVAL -{\ - +hide-from-header{block}\ -} -TAG:^hide-from-header\{block\}$ - -# Set Header = From: schneewitchen(a)example.org -# Expect Header = From: siebenzwerge(a)example.org -{\ - +hide-from-header{siebenzwerge(a)example.org}\ -} -TAG:^hide-from-header\{siebenzwerge@example.org\}$ - -####################################################### -# Test prevent-compression -####################################################### - -# Set Header = Accept-Encoding: gzip, deflate -# Expect Header = REMOVAL -# -# Set Header = Accept-Encoding: gzip -# Expect Header = REMOVAL -# -# Set Header = Accept-Encoding: deflate -# Expect Header = REMOVAL -{\ - +prevent-compression\ -} -TAG:^prevent-compression$ - -####################################################### -# Test content filters which could cause problems with -# range requests. -####################################################### - -# Set Header = Range: bytes=1234-5678 -# Expect Header = REMOVAL -# Set Header = If-Range: bytes=1234-5678 -# Expect Header = REMOVAL -# Set Header = Request-Range: bytes=1234-5678 -# Expect Header = REMOVAL -{\ - +deanimate-gifs{last} \ - -filter \ -} -TAG:^deanimate-gifs\{last\}$ - -# Set Header = Range: bytes=1234-5678 -# Expect Header = REMOVAL -# Set Header = If-Range: bytes=1234-5678 -# Expect Header = REMOVAL -# Set Header = Request-Range: bytes=1234-5678 -# Expect Header = REMOVAL -{\ - -deanimate-gifs \ - +filter{banners-by-size} \ -} -TAG:^filter\{banners-by-size\}$ - -# Set Header = Range: bytes=1234-5678 -# Expect Header = NO CHANGE -# Set Header = If-Range: bytes=1234-5678 -# Expect Header = NO CHANGE -# Set Header = Request-Range: bytes=1234-5678 -# Expect Header = NO CHANGE -{\ - -deanimate-gifs \ - -filter \ -} -TAG:^no-content-filter$ - -# Set Header = Connection: close -# Expect Header = Connection: keep-alive -# Level = 13 -# Set Header = Connection: keep-alive -# Expect Header = NO CHANGE -# Level = 13 -# Set Header = Connection: -# Expect Header = Connection: keep-alive -# Level = 13 -{} -TAG:^Connection: keep-alive$ - -# Set Header = Connection: keep-alive -# Expect Header = Connection: close -# Level = 14 -# Set Header = Connection: -# Expect Header = Connection: close -# Level = 14 -{} -TAG:^Connection: close$ - -# XXX: Removing a header by not specifying a value is -# an inherited curl feature and could be viewed as a -# bug as far as Privoxy-Regression-Test is concerned. -# -# Set Header = Host: -# Expect Header = Host: p.p -{} -TAG:^No Host header$ - -# Set Header = Host: whatever.example.org -# Expect Header = NO CHANGE -{} -TAG:^Host header other than the target host$ - -# XXX: check the RFC to use a real value -# Set Header = Keep-Alive: Yes -# Expect Header = REMOVAL -{} -TAG:^Keep-Alive header removal$ - -# XXX: check the RFC to use a real value -# Set Header = proxy-connection: keep-alive -# Expect Header = REMOVAL -{} -TAG:^Proxy-Connection removal$ - -# Set Header = Proxy-Connection: keep-alive -# Expect Header = REMOVAL -{} -TAG:^Proxy-Connection removal$ - -# These are somewhat redundant when testing with -# GET requests, but I want to remember then when -# TRACE requests are supported. -# -# Set Header = Max-Forwards: 0 -# Expect Header = NO CHANGE -# Set Header = Max-Forwards: 1 -# Expect Header = NO CHANGE -# Set Header = Max-Forwards: -1 -# Expect Header = NO CHANGE -# Set Header = Max-Forwards: 3 -# Expect Header = NO CHANGE -{} -TAG:^Max-Forwards header without TRACE method$ - -################################################################ -# -# Fairly dumb tests for Privoxy CGI pages. -# -# These are mainly useful for checking for memory leaks -# with Valgrind or whether or not the user manual is installed -# correctly and are unlikely to actually detect any -# -# Note that if "Expect Status Code" is missing, 200 is implied. -# -################################################################ - -# Fetch Test = http://p.p/ -# Will fail if compiled with FEATURE_GRACEFUL_TERMINATION -# Fetch Test = http://p.p/die -# Expect Status Code = 404 -# Fetch Test = http://p.p/show-status -# Fetch Test = http://config.privoxy.org/show-status?file=actions&index=0 -# Fetch Test = http://config.privoxy.org/show-status?file=filter&index=0 -# XXX: for the invalid ones we probably shouldn't return status code 200. -# Fetch Test = http://config.privoxy.org/show-status?file=actions&index=100 -# Fetch Test = http://config.privoxy.org/show-status?file=actions&index=NaN -# Fetch Test = http://config.privoxy.org/show-status?file=actions -# Fetch Test = http://config.privoxy.org/show-status?file=filter&index=100 -# Fetch Test = http://config.privoxy.org/show-status?file=filter&index=NaN -# Fetch Test = http://config.privoxy.org/show-status?file=filter -# Fetch Test = http://config.privoxy.org/show-status?file=invalid -# Fetch Test = http://config.privoxy.org/show-status?file=trust -# Fetch Test = http://p.p/show-version -# Fetch Test = http://p.p/show-request -# Fetch Test = http://p.p/show-url-info -# Fetch Test = http://p.p/show-url-info?url=www.privoxy.org%2F -# Fetch Test = http://p.p/show-url-info?url=http:%2F%2Fwww.privoxy.org%2F -# Fetch Test = http://p.p/show-url-info?url=HTTp:%2F%2Fwww.privoxy.org%2F -# Fetch Test = http://p.p/show-url-info?url=https:%2F%2Fwww.privoxy.org%2F -# Fetch Test = http://p.p/show-url-info?url=HtTps:%2F%2Fwww.privoxy.org%2F -# Fetch Test = http://p.p/show-url-info?url=ftp:%2F%2Fwww.privoxy.org%2F -# Fetch Test = http://p.p/show-url-info?url=FTp:%2F%2Fwww.privoxy.org%2F -# Fetch Test = http://p.p/show-url-info?url= -# Fetch Test = http://p.p/show-url-info?url=%2F -# Fetch Test = http://p.p/toggle -# Fetch Test = http://p.p/edit-actions -# Fetch Test = http://p.p/eaa -# Fetch Test = http://p.p/eau -# Fetch Test = http://p.p/ear -# Fetch Test = http://p.p/eal -# Fetch Test = http://p.p/eafu -# Fetch Test = http://p.p/eas -# Fetch Test = http://p.p/easa -# Fetch Test = http://p.p/easr -# Fetch Test = http://p.p/eass -# Fetch Test = http://p.p/edit-actions-for-url -# Fetch Test = http://p.p/edit-actions-list -# Fetch Test = http://p.p/edit-actions-submit -# Fetch Test = http://p.p/edit-actions-url -# Fetch Test = http://p.p/edit-actions-url-form -# Fetch Test = http://p.p/edit-actions-add-url -# Fetch Test = http://p.p/edit-actions-add-url-form -# Fetch Test = http://p.p/edit-actions-remove-url -# Fetch Test = http://p.p/edit-actions-remove-url-form -# Fetch Test = http://p.p/edit-actions-section-add -# Fetch Test = http://p.p/edit-actions-section-remove -# Fetch Test = http://p.p/edit-actions-section-swap -# Fetch Test = http://p.p/error-favicon.ico -# Fetch Test = http://p.p/favicon.ico -# Fetch Test = http://p.p/robots.txt -# Fetch Test = http://p.p/send-banner -# Fetch Test = http://p.p/send-stylesheet -# Fetch Test = http://p.p/t -# Fetch Test = http://p.p/url-info-osd.xml - -# Trusted CGI Request = http://p.p/edit-actions -# Expect Status Code = 302 -# Level = 12 # Depends on the CGI editor being enabled -# Fetch Test = http://p.p/does-not-exist -# Expect Status Code = 404 -# Trusted CGI Request = http://p.p/eaa -# Trusted CGI Request = http://p.p/eau -# Trusted CGI Request = http://p.p/ear -# Trusted CGI Request = http://p.p/eal -# Trusted CGI Request = http://p.p/eafu -# Trusted CGI Request = http://p.p/eas -# Trusted CGI Request = http://p.p/easa -# Trusted CGI Request = http://p.p/easr -# Trusted CGI Request = http://p.p/eass -# Trusted CGI Request = http://p.p/edit-actions-for-url -# Trusted CGI Request = http://p.p/edit-actions-list -# Trusted CGI Request = http://p.p/edit-actions-submit -# Trusted CGI Request = http://p.p/edit-actions-url -# Trusted CGI Request = http://p.p/edit-actions-url-form -# Trusted CGI Request = http://p.p/edit-actions-add-url -# Trusted CGI Request = http://p.p/edit-actions-add-url-form -# Trusted CGI Request = http://p.p/edit-actions-remove-url -# Trusted CGI Request = http://p.p/edit-actions-remove-url-form -# Trusted CGI Request = http://p.p/edit-actions-section-add -# Trusted CGI Request = http://p.p/edit-actions-section-remove -# Trusted CGI Request = http://p.p/edit-actions-section-swap -# Trusted CGI Request = http://p.p/send-stylesheet - -# The following tests depend on Privoxy being configured to deliver the user manual - -# Fetch Test = http://p.p/user-manual -# Expect Status Code = 302 -# Level = 9 -# Fetch Test = http://p.p/user-manual/ -# Level = 9 -# Fetch Test = http://p.p/user-manual/actions-file.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/appendix.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/config.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/configuration.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/contact.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/copyright.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/files-in-use.jpg -# Level = 9 -# Fetch Test = http://p.p/user-manual/filter-file.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/index.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/installation.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/introduction.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/p_doc.css -# Level = 9 -# Fetch Test = http://p.p/user-manual/proxy2.jpg -# Level = 9 -# Fetch Test = http://p.p/user-manual/proxy_setup.jpg -# Level = 9 -# Fetch Test = http://p.p/user-manual/quickstart.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/seealso.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/startup.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/templates.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/upgradersnote.html -# Level = 9 -# Fetch Test = http://p.p/user-manual/whatsnew.html -# Level = 9 - - -# Method Test = OPTIONS -# Method Test = GET -# Method Test = get -# Method Test = gEt -# Method Test = HEAD -# Method Test = POST -# Method Test = PUT -# Method Test = DELETE -# Method Test = OPTIONS -# Method Test = TRACE -# Method Test = CONNECT -# Method Test = PROPFIND -# Method Test = PROPPATCH -# Method Test = MOVE -# Method Test = COPY -# Method Test = MKCOL -# Method Test = LOCK -# Method Test = UNLOCK -# Method Test = BCOPY -# Method Test = BMOVE -# Method Test = BDELETE -# Method Test = BPROPFIND -# Method Test = BPROPPATCH -# Method Test = SUBSCRIBE -# Method Test = UNSUBSCRIBE -# Method Test = NOTIFY -# Method Test = POLL -# Method Test = VERSION-CONTROL -# Method Test = REPORT -# Method Test = CHECKOUT -# Method Test = CHECKIN -# Method Test = UNCHECKOUT -# Method Test = MKWORKSPACE -# Method Test = UPDATE -# Method Test = LABEL -# Method Test = MERGE -# Method Test = BASELINE-CONTROL -# Method Test = MKACTIVITY -# Method Test = PRIVOXY-REGRESSION-TEST-IN-THE-HOUSE -# Expect Status Code = 400 - -{+block{Forbidden Port. You are not supposed to see this.}} -config.privoxy.org:1-/ -p.p:1-/ - -{-block} -config.privoxy.org:3,79-81/ -p.p:3,22,79-81/ - -# Fetch Test = http://oh-dear-this-hostname-is-so-very-long-that-it-can-not-possibly-be-fo… -# Expect Status Code = 503 -{+forward-override{forward-socks5 127.0.0.1:12345 .}} -oh-dear-this-hostname-is-so-very-long-that-it-can-not-possibly-be-forwarded-through-socks5-as-a-result-we-therefore-expect-privoxy-to-return-an-error-response-instead-of-forwarding-the-request-because-as-already-mentioned-this-host-is-really-very-long.example/ - -# Fetch Test = http://oh-dear-this-hostname-is-short-enough-but-there-is-no-socks-server-l… -# Expect Status Code = 503 -{+forward-override{forward-socks5 127.0.0.1:12345 .}} -oh-dear-this-hostname-is-short-enough-but-there-is-no-socks-server-listening.example - -# This one currently triggers the same error condition as the -# test above (socks5 server unreachable), but once Privoxy -# starts to properly reject invalid ports it should become useful. - -# Fetch Test = http://invalid-forward5-gateway-port.example -# Expect Status Code = 503 -{+forward-override{forward-socks5 127.0.0.1:-1 127.0.0.1:12345}} -invalid-forward5-gateway-port.example - -# Fetch Test = http://forward5-null-gateway-host.example -# Expect Status Code = 503 -{+forward-override{forward-socks5 :12345 127.0.0.1:12345}} -forward5-null-gateway-host.example - -# Fetch Test = http://www.forbidden-connect.example:444/ -# Method = CONNECT -# Expect Status Code = 403 -{+limit-connect{443}} -www.forbidden-connect.example/ - -# Fetch Test = http://www.blocked-request.example/blocked-request -# Expect Status Code = 403 -{+block{This request failed to make it to the target destination which means the test succeeded.}} -www.blocked-request.example/blocked-request - -# Fetch Test = http://www.blocked-request.example/blocked-request-with-no-reason-specified -# Expect Status Code = 403 -{+block} -www.blocked-request.example/blocked-request-with-no-reason-specified - -# Some domain pattern tests -# -{+block{domain pattern test}} -# Blocked URL = http://domain-pattern-test.example/ -# Blocked URL = http://domain-pattern-test.example.org/ -domain-pattern-test.example. - -# Just in case there is no white-space fuzzer in the house ... -# -# Set Header = X-LWS-Test: no superfluous white space here -# Expect Header = NO CHANGE -# Set Header = X-LWS-Test: superfluous white space in the house -# Expect Header = X-LWS-Test: superfluous white space in the house -# Set Header = X-LWS-Test : superfluous white space in the house -# Expect Header = X-LWS-Test: superfluous white space in the house -# Set Header = X-LWS-Test: :superfluous white space in the house -# Expect Header = X-LWS-Test: :superfluous white space in the house -# Set Header = X-LWS-Test: :no superfluous white space here -# Expect Header = NO CHANGE -# Set Header = X-LWS-Test: superfluous white tabs in the house -# Expect Header = X-LWS-Test: superfluous white tabs in the house -# Set Header = X-LWS-Test : superfluous white tabs in the house -# Expect Header = X-LWS-Test: superfluous white tabs in the house -# Set Header = X-LWS-Test: "leave quoted lws alone" -# Expect Header = X-LWS-Test: "leave quoted lws alone" -# Set Header = X-LWS-Test: "leave quoted lws alone" thxbye -# Expect Header = X-LWS-Test: "leave quoted lws alone" thxbye -# Set Header = X-LWS-Test: " Do I Look like quoted text? Me thinks not. -# Expect Header = X-LWS-Test: " Do I Look like quoted text? Me thinks not. -# Set Header = X-LWS-Test: "This is quoted" this is not "but this is again" -# Expect Header = X-LWS-Test: "This is quoted" this is not "but this is again" -# Set Header = X-LWS-Test: "This is quoted" this is not "this is " but " this again is not -# Expect Header = X-LWS-Test: "This is quoted" this is not "this is " but " this again is not -{} -TAG:^LWS Tests$ diff --git a/external/privoxy/slackware/rc.privoxy.orig b/external/privoxy/slackware/rc.privoxy.orig deleted file mode 100644 index cbd0db5..0000000 --- a/external/privoxy/slackware/rc.privoxy.orig +++ /dev/null @@ -1,109 +0,0 @@ -#!/bin/sh -# ******************************************************************** -# This script uses exit to return proper error codes, -# sourcing (. /path/to/rc.privoxy) it in your system's -# rc files is a bad idea. -# ******************************************************************** - -RETVAL=1 - -PRIVOXY_PRG="%PROGRAM%" -PRIVOXY_BIN="%SBIN_DEST%/$PRIVOXY_PRG" -PRIVOXY_CONF="%CONF_DEST%/config" -PRIVOXY_USER="%USER%" -PRIVOXY_GROUP="%GROUP%" -PRIVOXY_PID="/var/run/$PRIVOXY_PRG.pid" - -declare -i check -check=(`/bin/ps -e|/bin/grep $PRIVOXY_PRG|/usr/bin/wc -l`) - -# some checks for us -if [ ! -x $PRIVOXY_BIN ] ; then exit 0 ;fi -if [ ! -f $PRIVOXY_CONF ] ; then exit 0 ;fi - -# See how we were called. - -PRIVOXY="$PRIVOXY_BIN --user $PRIVOXY_USER.$PRIVOXY_GROUP --pidfile $PRIVOXY_PID $PRIVOXY_CONF" - -start () { - # start daemon - echo -n $"Starting $PRIVOXY_PRG: " - - if [ ! -f $PRIVOXY_PID ]; then - ( $PRIVOXY 2>/dev/tty9 ) \ - && echo " OK" \ - && /bin/touch /var/lock/$PRIVOXY_PRG \ - && RETVAL=0 - elif [ $check -lt 3 ]; then - echo "Zombie lock file found" - /bin/rm -f /var/lock/$PRIVOXY_PRG $PRIVOXY_PID - echo "Retrying..." - start - else - echo "Already running" - fi - echo -} - -stop () { - # stop daemon - echo -n $"Stopping $PRIVOXY_PRG: " - if [ -f $PRIVOXY_PID ]; then - /bin/kill `/bin/cat $PRIVOXY_PID` \ - && /bin/rm -f /var/lock/$PRIVOXY_PRG $PRIVOXY_PID \ - && echo " OK" \ - && RETVAL=0 - echo - else - echo " Not Running" - fi -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - reload) - if [ -f $PRIVOXY_PID ] ; then - /bin/kill -HUP `cat $PRIVOXY_PID` \ - && RETVAL=0 - fi - ;; - restart) - stop - start - ;; - kill) - echo "Kill all Privoxy" - /bin/rm -f /var/lock/$PRIVOXY_PRG $PRIVOXY_PID - /bin/killall $PRIVOXY - ;; - condrestart) - # restart only if already running - if [ -f $PRIVOXY_PID ] ; then - stop - start - fi - ;; - status) - /bin/ps ax|/bin/grep $PRIVOXY_PRG|/bin/grep -v 'grep\|init\.d\|rc\.d' - RETVAL=0 - ;; - top) - if [ -f $PRIVOXY_PID ]; then - a="" - for i in `/sbin/pidof $PRIVOXY_PRG` ; do - a="$a -p $i" - done - /usr/bin/top $a - fi - ;; - *) - echo $"Usage: $PRIVOXY_PRG {start|stop|reload|restart|condrestart|status|top|kill}" - exit 1 -esac - -exit $RETVAL diff --git a/external/privoxy/ssplit.c b/external/privoxy/ssplit.c deleted file mode 100644 index d916286..0000000 --- a/external/privoxy/ssplit.c +++ /dev/null @@ -1,218 +0,0 @@ -const char ssplit_rcs[] = "$Id: ssplit.c,v 1.9 2007/11/03 14:35:45 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/ssplit.c,v $ - * - * Purpose : A function to split a string at specified delimiters. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: ssplit.c,v $ - * Revision 1.9 2007/11/03 14:35:45 fabiankeil - * Fix spelling in Purpose line. Patch submitted by Simon Ruderich. - * - * Revision 1.8 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.6 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.5 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.4 2001/11/13 00:16:38 jongfoster - * Replacing references to malloc.h with the standard stdlib.h - * (See ANSI or K&R 2nd Ed) - * - * Revision 1.3 2001/05/29 08:54:25 jongfoster - * Rewrote the innards of ssplit() to be easier to understand, - * faster, and to use less memory. Didn't change the interface - * except to give the parameters meaningful names. - * - * Revision 1.2 2001/05/17 23:01:01 oes - * - Cleaned CRLF's from the sources and related files - * - * Revision 1.1.1.1 2001/05/15 13:59:04 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <string.h> -#include <stdlib.h> - -#include "ssplit.h" -#include "miscutil.h" - -const char ssplit_h_rcs[] = SSPLIT_H_VERSION; - -/* Define this for lots of debugging information to stdout */ -#undef SSPLIT_VERBOSE -/* #define SSPLIT_VERBOSE 1 */ - - -/********************************************************************* - * - * Function : ssplit - * - * Description : Split a string using delimiters in `delim'. Results - * go into `vec'. - * - * Parameters : - * 1 : str = string to split. Will be split in place - * (i.e. do not free until you've finished with vec, - * previous contents will be trashed by the call). - * 2 : delim = array of delimiters (if NULL, uses " \t"). - * 3 : vec[] = results vector (aka. array) [out] - * 4 : vec_len = number of usable slots in the vector (aka. array size) - * 5 : dont_save_empty_fields = zero if consecutive delimiters - * give a null output field(s), nonzero if they are just - * to be considered as single delimeter - * 6 : ignore_leading = nonzero to ignore leading field - * separators. - * - * Returns : -1 => Error: vec_len is too small to hold all the - * data, or str == NULL. - * >=0 => the number of fields put in `vec'. - * On error, vec and str may still have been overwritten. - * - *********************************************************************/ -int ssplit(char *str, const char *delim, char *vec[], int vec_len, - int dont_save_empty_fields, int ignore_leading) -{ - unsigned char is_delim[256]; - unsigned char char_type; - int vec_count = 0; - - if (!str) - { - return(-1); - } - - - /* Build is_delim array */ - - memset(is_delim, '\0', sizeof(is_delim)); - - if (!delim) - { - delim = " \t"; /* default field separators */ - } - - while (*delim) - { - is_delim[(unsigned)(unsigned char)*delim++] = 1; /* separator */ - } - - is_delim[(unsigned)(unsigned char)'\0'] = 2; /* terminator */ - is_delim[(unsigned)(unsigned char)'\n'] = 2; /* terminator */ - - - /* Parse string */ - - if (ignore_leading) - { - /* skip leading separators */ - while (is_delim[(unsigned)(unsigned char)*str] == 1) - { - str++; - } - } - - /* first pointer is the beginning of string */ - /* Check if we want to save this field */ - if ( (!dont_save_empty_fields) - || (is_delim[(unsigned)(unsigned char)*str] == 0) ) - { - /* - * We want empty fields, or the first character in this - * field is not a delimiter or the end of string. - * So save it. - */ - if (vec_count >= vec_len) - { - return(-1); /* overflow */ - } - vec[vec_count++] = (char *) str; - } - - while ((char_type = is_delim[(unsigned)(unsigned char)*str]) != 2) - { - if (char_type == 1) - { - /* the char is a separator */ - - /* null terminate the substring */ - *str++ = '\0'; - - /* Check if we want to save this field */ - if ( (!dont_save_empty_fields) - || (is_delim[(unsigned)(unsigned char)*str] == 0) ) - { - /* - * We want empty fields, or the first character in this - * field is not a delimiter or the end of string. - * So save it. - */ - if (vec_count >= vec_len) - { - return(-1); /* overflow */ - } - vec[vec_count++] = (char *) str; - } - } - else - { - str++; - } - } - *str = '\0'; /* null terminate the substring */ - -#ifdef SSPLIT_VERBOSE - { - int i; - printf("dump %d strings\n", vec_count); - for (i = 0; i < vec_count; i++) - { - printf("%d '%s'\n", i, vec[i]); - } - } -#endif /* def SSPLIT_VERBOSE */ - - return(vec_count); -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/ssplit.h b/external/privoxy/ssplit.h deleted file mode 100644 index 3e9b991..0000000 --- a/external/privoxy/ssplit.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef SSPLIT_H_INCLUDED -#define SSPLIT_H_INCLUDED -#define SSPLIT_H_VERSION "$Id: ssplit.h,v 1.7 2006/07/18 14:48:47 david__schmidt Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/ssplit.h,v $ - * - * Purpose : A function to split a string at specified deliminters. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: ssplit.h,v $ - * Revision 1.7 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.5 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.4 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.3 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.2 2001/05/29 08:54:25 jongfoster - * Rewrote the innards of ssplit() to be easier to understand, - * faster, and to use less memory. Didn't change the interface - * except to give the parameters meaningful names. - * - * Revision 1.1.1.1 2001/05/15 13:59:04 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -extern int ssplit(char *str, const char *delim, char *vec[], int vec_len, - int dont_save_empty_fields, int ignore_leading); - -/* Revision control strings from this header and associated .c file */ -extern const char ssplit_rcs[]; -extern const char ssplit_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef SSPLIT_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/strptime.h b/external/privoxy/strptime.h deleted file mode 100644 index 63ffe57..0000000 --- a/external/privoxy/strptime.h +++ /dev/null @@ -1,1003 +0,0 @@ -/* Convert a string representation of time to a time value. - Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc. - This file is part of the GNU C Library. - Contributed by Ulrich Drepper <drepper(a)cygnus.com>, 1996. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If not, - write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* XXX This version of the implementation is not really complete. - Some of the fields cannot add information alone. But if seeing - some of them in the same format (such as year, week and weekday) - this is enough information for determining the date. */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include <ctype.h> -#include <limits.h> -#include <string.h> -#include <time.h> - -#ifdef _LIBC -# include "../locale/localeinfo.h" -#endif - - -#ifndef __P -# if defined (__GNUC__) || (defined (__STDC__) && __STDC__) -# define __P(args) args -# else -# define __P(args) () -# endif /* GCC. */ -#endif /* Not __P. */ - -#if ! HAVE_LOCALTIME_R && ! defined localtime_r -# ifdef _LIBC -# define localtime_r __localtime_r -# else -/* Approximate localtime_r as best we can in its absence. */ -# define localtime_r my_localtime_r -static struct tm *localtime_r __P ((const time_t *, struct tm *)); -static struct tm * -localtime_r (t, tp) - const time_t *t; - struct tm *tp; -{ - struct tm *l = localtime (t); - if (! l) - return 0; - *tp = *l; - return tp; -} -# endif /* ! _LIBC */ -#endif /* ! HAVE_LOCALTIME_R && ! defined (localtime_r) */ - - -#define match_char(ch1, ch2) if (ch1 != ch2) return NULL -#if defined __GNUC__ && __GNUC__ >= 2 -# define match_string(cs1, s2) \ - ({ size_t len = strlen (cs1); \ - int result = strncasecmp ((cs1), (s2), len) == 0; \ - if (result) (s2) += len; \ - result; }) -#else -/* Oh come on. Get a reasonable compiler. */ -# define match_string(cs1, s2) \ - (strncasecmp ((cs1), (s2), strlen (cs1)) ? 0 : ((s2) += strlen (cs1), 1)) -#endif -/* We intentionally do not use isdigit() for testing because this will - lead to problems with the wide character version. */ -#define get_number(from, to, n) \ - do { \ - int __n = n; \ - val = 0; \ - while (*rp == ' ') \ - ++rp; \ - if (*rp < '0' || *rp > '9') \ - return NULL; \ - do { \ - val *= 10; \ - val += *rp++ - '0'; \ - } while (--__n > 0 && val * 10 <= to && *rp >= '0' && *rp <= '9'); \ - if (val < from || val > to) \ - return NULL; \ - } while (0) -#ifdef _NL_CURRENT -# define get_alt_number(from, to, n) \ - ({ \ - __label__ do_normal; \ - if (*decided != raw) \ - { \ - const char *alts = _NL_CURRENT (LC_TIME, ALT_DIGITS); \ - int __n = n; \ - int any = 0; \ - while (*rp == ' ') \ - ++rp; \ - val = 0; \ - do { \ - val *= 10; \ - while (*alts != '\0') \ - { \ - size_t len = strlen (alts); \ - if (strncasecmp (alts, rp, len) == 0) \ - break; \ - alts += len + 1; \ - ++val; \ - } \ - if (*alts == '\0') \ - { \ - if (*decided == not && ! any) \ - goto do_normal; \ - /* If we haven't read anything it's an error. */ \ - if (! any) \ - return NULL; \ - /* Correct the premature multiplication. */ \ - val /= 10; \ - break; \ - } \ - else \ - *decided = loc; \ - } while (--__n > 0 && val * 10 <= to); \ - if (val < from || val > to) \ - return NULL; \ - } \ - else \ - { \ - do_normal: \ - get_number (from, to, n); \ - } \ - 0; \ - }) -#else -# define get_alt_number(from, to, n) \ - /* We don't have the alternate representation. */ \ - get_number(from, to, n) -#endif -#define recursive(new_fmt) \ - (*(new_fmt) != '\0' \ - && (rp = strptime_internal (rp, (new_fmt), tm, decided, era_cnt)) != NULL) - - -#ifdef _LIBC -/* This is defined in locale/C-time.c in the GNU libc. */ -extern const struct locale_data _nl_C_LC_TIME; -extern const unsigned short int __mon_yday[2][13]; - -# define weekday_name (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (DAY_1)].string) -# define ab_weekday_name \ - (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (ABDAY_1)].string) -# define month_name (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (MON_1)].string) -# define ab_month_name (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (ABMON_1)].string) -# define HERE_D_T_FMT (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (D_T_FMT)].string) -# define HERE_D_FMT (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (D_FMT)].string) -# define HERE_AM_STR (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (AM_STR)].string) -# define HERE_PM_STR (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (PM_STR)].string) -# define HERE_T_FMT_AMPM \ - (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (T_FMT_AMPM)].string) -# define HERE_T_FMT (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (T_FMT)].string) - -# define strncasecmp(s1, s2, n) __strncasecmp (s1, s2, n) -#else -static char const weekday_name[][10] = - { - "Sunday", "Monday", "Tuesday", "Wednesday", - "Thursday", "Friday", "Saturday" - }; -static char const ab_weekday_name[][4] = - { - "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" - }; -static char const month_name[][10] = - { - "January", "February", "March", "April", "May", "June", - "July", "August", "September", "October", "November", "December" - }; -static char const ab_month_name[][4] = - { - "Jan", "Feb", "Mar", "Apr", "May", "Jun", - "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" - }; -# define HERE_D_T_FMT "%a %b %e %H:%M:%S %Y" -# define HERE_D_FMT "%m/%d/%y" -# define HERE_AM_STR "AM" -# define HERE_PM_STR "PM" -# define HERE_T_FMT_AMPM "%I:%M:%S %p" -# define HERE_T_FMT "%H:%M:%S" - -const unsigned short int __mon_yday[2][13] = - { - /* Normal years. */ - { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 }, - /* Leap years. */ - { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 } - }; -#endif - -/* Status of lookup: do we use the locale data or the raw data? */ -enum locale_status { not, loc, raw }; - - -#ifndef __isleap -/* Nonzero if YEAR is a leap year (every 4 years, - except every 100th isn't, and every 400th is). */ -# define __isleap(year) \ - ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) -#endif - -/* Compute the day of the week. */ -static void -day_of_the_week (struct tm *tm) -{ - /* We know that January 1st 1970 was a Thursday (= 4). Compute the - the difference between this data in the one on TM and so determine - the weekday. */ - int corr_year = 1900 + tm->tm_year - (tm->tm_mon < 2); - int wday = (-473 - + (365 * (tm->tm_year - 70)) - + (corr_year / 4) - - ((corr_year / 4) / 25) + ((corr_year / 4) % 25 < 0) - + (((corr_year / 4) / 25) / 4) - + __mon_yday[0][tm->tm_mon] - + tm->tm_mday - 1); - tm->tm_wday = ((wday % 7) + 7) % 7; -} - -/* Compute the day of the year. */ -static void -day_of_the_year (struct tm *tm) -{ - tm->tm_yday = (__mon_yday[__isleap (1900 + tm->tm_year)][tm->tm_mon] - + (tm->tm_mday - 1)); -} - -static char * -#ifdef _LIBC -internal_function -#endif -strptime_internal __P ((const char *rp, const char *fmt, struct tm *tm, - enum locale_status *decided, int era_cnt)); - -static char * -#ifdef _LIBC -internal_function -#endif -strptime_internal (rp, fmt, tm, decided, era_cnt) - const char *rp; - const char *fmt; - struct tm *tm; - enum locale_status *decided; - int era_cnt; -{ - const char *rp_backup; - int cnt; - size_t val; - int have_I, is_pm; - int century, want_century; - int want_era; - int have_wday, want_xday; - int have_yday; - int have_mon, have_mday; -#ifdef _NL_CURRENT - size_t num_eras; -#endif - struct era_entry *era; - - have_I = is_pm = 0; - century = -1; - want_century = 0; - want_era = 0; - era = NULL; - - have_wday = want_xday = have_yday = have_mon = have_mday = 0; - - while (*fmt != '\0') - { - /* A white space in the format string matches 0 more or white - space in the input string. */ - if (isspace (*fmt)) - { - while (isspace (*rp)) - ++rp; - ++fmt; - continue; - } - - /* Any character but `%' must be matched by the same character - in the iput string. */ - if (*fmt != '%') - { - match_char (*fmt++, *rp++); - continue; - } - - ++fmt; -#ifndef _NL_CURRENT - /* We need this for handling the `E' modifier. */ - start_over: -#endif - - /* Make back up of current processing pointer. */ - rp_backup = rp; - - switch (*fmt++) - { - case '%': - /* Match the `%' character itself. */ - match_char ('%', *rp++); - break; - case 'a': - case 'A': - /* Match day of week. */ - for (cnt = 0; cnt < 7; ++cnt) - { -#ifdef _NL_CURRENT - if (*decided !=raw) - { - if (match_string (_NL_CURRENT (LC_TIME, DAY_1 + cnt), rp)) - { - if (*decided == not - && strcmp (_NL_CURRENT (LC_TIME, DAY_1 + cnt), - weekday_name[cnt])) - *decided = loc; - break; - } - if (match_string (_NL_CURRENT (LC_TIME, ABDAY_1 + cnt), rp)) - { - if (*decided == not - && strcmp (_NL_CURRENT (LC_TIME, ABDAY_1 + cnt), - ab_weekday_name[cnt])) - *decided = loc; - break; - } - } -#endif - if (*decided != loc - && (match_string (weekday_name[cnt], rp) - || match_string (ab_weekday_name[cnt], rp))) - { - *decided = raw; - break; - } - } - if (cnt == 7) - /* Does not match a weekday name. */ - return NULL; - tm->tm_wday = cnt; - have_wday = 1; - break; - case 'b': - case 'B': - case 'h': - /* Match month name. */ - for (cnt = 0; cnt < 12; ++cnt) - { -#ifdef _NL_CURRENT - if (*decided !=raw) - { - if (match_string (_NL_CURRENT (LC_TIME, MON_1 + cnt), rp)) - { - if (*decided == not - && strcmp (_NL_CURRENT (LC_TIME, MON_1 + cnt), - month_name[cnt])) - *decided = loc; - break; - } - if (match_string (_NL_CURRENT (LC_TIME, ABMON_1 + cnt), rp)) - { - if (*decided == not - && strcmp (_NL_CURRENT (LC_TIME, ABMON_1 + cnt), - ab_month_name[cnt])) - *decided = loc; - break; - } - } -#endif - if (match_string (month_name[cnt], rp) - || match_string (ab_month_name[cnt], rp)) - { - *decided = raw; - break; - } - } - if (cnt == 12) - /* Does not match a month name. */ - return NULL; - tm->tm_mon = cnt; - want_xday = 1; - break; - case 'c': - /* Match locale's date and time format. */ -#ifdef _NL_CURRENT - if (*decided != raw) - { - if (!recursive (_NL_CURRENT (LC_TIME, D_T_FMT))) - { - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - if (*decided == not && - strcmp (_NL_CURRENT (LC_TIME, D_T_FMT), HERE_D_T_FMT)) - *decided = loc; - want_xday = 1; - break; - } - *decided = raw; - } -#endif - if (!recursive (HERE_D_T_FMT)) - return NULL; - want_xday = 1; - break; - case 'C': - /* Match century number. */ -#ifdef _NL_CURRENT - match_century: -#endif - get_number (0, 99, 2); - century = val; - want_xday = 1; - break; - case 'd': - case 'e': - /* Match day of month. */ - get_number (1, 31, 2); - tm->tm_mday = val; - have_mday = 1; - want_xday = 1; - break; - case 'F': - if (!recursive ("%Y-%m-%d")) - return NULL; - want_xday = 1; - break; - case 'x': -#ifdef _NL_CURRENT - if (*decided != raw) - { - if (!recursive (_NL_CURRENT (LC_TIME, D_FMT))) - { - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - if (*decided == not - && strcmp (_NL_CURRENT (LC_TIME, D_FMT), HERE_D_FMT)) - *decided = loc; - want_xday = 1; - break; - } - *decided = raw; - } -#endif - /* Fall through. */ - case 'D': - /* Match standard day format. */ - if (!recursive (HERE_D_FMT)) - return NULL; - want_xday = 1; - break; - case 'k': - case 'H': - /* Match hour in 24-hour clock. */ - get_number (0, 23, 2); - tm->tm_hour = val; - have_I = 0; - break; - case 'I': - /* Match hour in 12-hour clock. */ - get_number (1, 12, 2); - tm->tm_hour = val % 12; - have_I = 1; - break; - case 'j': - /* Match day number of year. */ - get_number (1, 366, 3); - tm->tm_yday = val - 1; - have_yday = 1; - break; - case 'm': - /* Match number of month. */ - get_number (1, 12, 2); - tm->tm_mon = val - 1; - have_mon = 1; - want_xday = 1; - break; - case 'M': - /* Match minute. */ - get_number (0, 59, 2); - tm->tm_min = val; - break; - case 'n': - case 't': - /* Match any white space. */ - while (isspace (*rp)) - ++rp; - break; - case 'p': - /* Match locale's equivalent of AM/PM. */ -#ifdef _NL_CURRENT - if (*decided != raw) - { - if (match_string (_NL_CURRENT (LC_TIME, AM_STR), rp)) - { - if (strcmp (_NL_CURRENT (LC_TIME, AM_STR), HERE_AM_STR)) - *decided = loc; - break; - } - if (match_string (_NL_CURRENT (LC_TIME, PM_STR), rp)) - { - if (strcmp (_NL_CURRENT (LC_TIME, PM_STR), HERE_PM_STR)) - *decided = loc; - is_pm = 1; - break; - } - *decided = raw; - } -#endif - if (!match_string (HERE_AM_STR, rp)) - if (match_string (HERE_PM_STR, rp)) - is_pm = 1; - else - return NULL; - break; - case 'r': -#ifdef _NL_CURRENT - if (*decided != raw) - { - if (!recursive (_NL_CURRENT (LC_TIME, T_FMT_AMPM))) - { - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - if (*decided == not && - strcmp (_NL_CURRENT (LC_TIME, T_FMT_AMPM), - HERE_T_FMT_AMPM)) - *decided = loc; - break; - } - *decided = raw; - } -#endif - if (!recursive (HERE_T_FMT_AMPM)) - return NULL; - break; - case 'R': - if (!recursive ("%H:%M")) - return NULL; - break; - case 's': - { - /* The number of seconds may be very high so we cannot use - the `get_number' macro. Instead read the number - character for character and construct the result while - doing this. */ - time_t secs = 0; - if (*rp < '0' || *rp > '9') - /* We need at least one digit. */ - return NULL; - - do - { - secs *= 10; - secs += *rp++ - '0'; - } - while (*rp >= '0' && *rp <= '9'); - - if (localtime_r (&secs, tm) == NULL) - /* Error in function. */ - return NULL; - } - break; - case 'S': - get_number (0, 61, 2); - tm->tm_sec = val; - break; - case 'X': -#ifdef _NL_CURRENT - if (*decided != raw) - { - if (!recursive (_NL_CURRENT (LC_TIME, T_FMT))) - { - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - if (strcmp (_NL_CURRENT (LC_TIME, T_FMT), HERE_T_FMT)) - *decided = loc; - break; - } - *decided = raw; - } -#endif - /* Fall through. */ - case 'T': - if (!recursive (HERE_T_FMT)) - return NULL; - break; - case 'u': - get_number (1, 7, 1); - tm->tm_wday = val % 7; - have_wday = 1; - break; - case 'g': - get_number (0, 99, 2); - /* XXX This cannot determine any field in TM. */ - break; - case 'G': - if (*rp < '0' || *rp > '9') - return NULL; - /* XXX Ignore the number since we would need some more - information to compute a real date. */ - do - ++rp; - while (*rp >= '0' && *rp <= '9'); - break; - case 'U': - case 'V': - case 'W': - get_number (0, 53, 2); - /* XXX This cannot determine any field in TM without some - information. */ - break; - case 'w': - /* Match number of weekday. */ - get_number (0, 6, 1); - tm->tm_wday = val; - have_wday = 1; - break; - case 'y': -#ifdef _NL_CURRENT - match_year_in_century: -#endif - /* Match year within century. */ - get_number (0, 99, 2); - /* The "Year 2000: The Millennium Rollover" paper suggests that - values in the range 69-99 refer to the twentieth century. */ - tm->tm_year = val >= 69 ? val : val + 100; - /* Indicate that we want to use the century, if specified. */ - want_century = 1; - want_xday = 1; - break; - case 'Y': - /* Match year including century number. */ - get_number (0, 9999, 4); - tm->tm_year = val - 1900; - want_century = 0; - want_xday = 1; - break; - case 'Z': - /* XXX How to handle this? */ - break; - case 'E': -#ifdef _NL_CURRENT - switch (*fmt++) - { - case 'c': - /* Match locale's alternate date and time format. */ - if (*decided != raw) - { - const char *fmt = _NL_CURRENT (LC_TIME, ERA_D_T_FMT); - - if (*fmt == '\0') - fmt = _NL_CURRENT (LC_TIME, D_T_FMT); - - if (!recursive (fmt)) - { - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - if (strcmp (fmt, HERE_D_T_FMT)) - *decided = loc; - want_xday = 1; - break; - } - *decided = raw; - } - /* The C locale has no era information, so use the - normal representation. */ - if (!recursive (HERE_D_T_FMT)) - return NULL; - want_xday = 1; - break; - case 'C': - if (*decided != raw) - { - if (era_cnt >= 0) - { - era = _nl_select_era_entry (era_cnt); - if (match_string (era->era_name, rp)) - { - *decided = loc; - break; - } - else - return NULL; - } - else - { - num_eras = _NL_CURRENT_WORD (LC_TIME, - _NL_TIME_ERA_NUM_ENTRIES); - for (era_cnt = 0; era_cnt < (int) num_eras; - ++era_cnt, rp = rp_backup) - { - era = _nl_select_era_entry (era_cnt); - if (match_string (era->era_name, rp)) - { - *decided = loc; - break; - } - } - if (era_cnt == (int) num_eras) - { - era_cnt = -1; - if (*decided == loc) - return NULL; - } - else - break; - } - - *decided = raw; - } - /* The C locale has no era information, so use the - normal representation. */ - goto match_century; - case 'y': - if (*decided == raw) - goto match_year_in_century; - - get_number(0, 9999, 4); - tm->tm_year = val; - want_era = 1; - want_xday = 1; - break; - case 'Y': - if (*decided != raw) - { - num_eras = _NL_CURRENT_WORD (LC_TIME, - _NL_TIME_ERA_NUM_ENTRIES); - for (era_cnt = 0; era_cnt < (int) num_eras; - ++era_cnt, rp = rp_backup) - { - era = _nl_select_era_entry (era_cnt); - if (recursive (era->era_format)) - break; - } - if (era_cnt == (int) num_eras) - { - era_cnt = -1; - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - *decided = loc; - era_cnt = -1; - break; - } - - *decided = raw; - } - get_number (0, 9999, 4); - tm->tm_year = val - 1900; - want_century = 0; - want_xday = 1; - break; - case 'x': - if (*decided != raw) - { - const char *fmt = _NL_CURRENT (LC_TIME, ERA_D_FMT); - - if (*fmt == '\0') - fmt = _NL_CURRENT (LC_TIME, D_FMT); - - if (!recursive (fmt)) - { - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - if (strcmp (fmt, HERE_D_FMT)) - *decided = loc; - break; - } - *decided = raw; - } - if (!recursive (HERE_D_FMT)) - return NULL; - break; - case 'X': - if (*decided != raw) - { - const char *fmt = _NL_CURRENT (LC_TIME, ERA_T_FMT); - - if (*fmt == '\0') - fmt = _NL_CURRENT (LC_TIME, T_FMT); - - if (!recursive (fmt)) - { - if (*decided == loc) - return NULL; - else - rp = rp_backup; - } - else - { - if (strcmp (fmt, HERE_T_FMT)) - *decided = loc; - break; - } - *decided = raw; - } - if (!recursive (HERE_T_FMT)) - return NULL; - break; - default: - return NULL; - } - break; -#else - /* We have no information about the era format. Just use - the normal format. */ - if (*fmt != 'c' && *fmt != 'C' && *fmt != 'y' && *fmt != 'Y' - && *fmt != 'x' && *fmt != 'X') - /* This is an illegal format. */ - return NULL; - - goto start_over; -#endif - case 'O': - switch (*fmt++) - { - case 'd': - case 'e': - /* Match day of month using alternate numeric symbols. */ - get_alt_number (1, 31, 2); - tm->tm_mday = val; - have_mday = 1; - want_xday = 1; - break; - case 'H': - /* Match hour in 24-hour clock using alternate numeric - symbols. */ - get_alt_number (0, 23, 2); - tm->tm_hour = val; - have_I = 0; - break; - case 'I': - /* Match hour in 12-hour clock using alternate numeric - symbols. */ - get_alt_number (1, 12, 2); - tm->tm_hour = val - 1; - have_I = 1; - break; - case 'm': - /* Match month using alternate numeric symbols. */ - get_alt_number (1, 12, 2); - tm->tm_mon = val - 1; - have_mon = 1; - want_xday = 1; - break; - case 'M': - /* Match minutes using alternate numeric symbols. */ - get_alt_number (0, 59, 2); - tm->tm_min = val; - break; - case 'S': - /* Match seconds using alternate numeric symbols. */ - get_alt_number (0, 61, 2); - tm->tm_sec = val; - break; - case 'U': - case 'V': - case 'W': - get_alt_number (0, 53, 2); - /* XXX This cannot determine any field in TM without - further information. */ - break; - case 'w': - /* Match number of weekday using alternate numeric symbols. */ - get_alt_number (0, 6, 1); - tm->tm_wday = val; - have_wday = 1; - break; - case 'y': - /* Match year within century using alternate numeric symbols. */ - get_alt_number (0, 99, 2); - tm->tm_year = val >= 69 ? val : val + 100; - want_xday = 1; - break; - default: - return NULL; - } - break; - default: - return NULL; - } - } - - if (have_I && is_pm) - tm->tm_hour += 12; - - if (century != -1) - { - if (want_century) - tm->tm_year = tm->tm_year % 100 + (century - 19) * 100; - else - /* Only the century, but not the year. Strange, but so be it. */ - tm->tm_year = (century - 19) * 100; - } - -#ifdef _NL_CURRENT - if (era_cnt != -1) - { - era = _nl_select_era_entry(era_cnt); - if (want_era) - tm->tm_year = (era->start_date[0] - + ((tm->tm_year - era->offset) - * era->absolute_direction)); - else - /* Era start year assumed. */ - tm->tm_year = era->start_date[0]; - } - else -#endif - if (want_era) - return NULL; - - if (want_xday && !have_wday) - { - if ( !(have_mon && have_mday) && have_yday) - { - /* We don't have tm_mon and/or tm_mday, compute them. */ - int t_mon = 0; - while (__mon_yday[__isleap(1900 + tm->tm_year)][t_mon] <= tm->tm_yday) - t_mon++; - if (!have_mon) - tm->tm_mon = t_mon - 1; - if (!have_mday) - tm->tm_mday = - (tm->tm_yday - - __mon_yday[__isleap(1900 + tm->tm_year)][t_mon - 1] + 1); - } - day_of_the_week (tm); - } - if (want_xday && !have_yday) - day_of_the_year (tm); - - return (char *) rp; -} - - -char * -strptime (buf, format, tm) - const char *buf; - const char *format; - struct tm *tm; -{ - enum locale_status decided; - -#ifdef _NL_CURRENT - decided = not; -#else - decided = raw; -#endif - return strptime_internal (buf, format, tm, &decided, -1); -} diff --git a/external/privoxy/templates/blocked b/external/privoxy/templates/blocked deleted file mode 100644 index 3ebc22e..0000000 --- a/external/privoxy/templates/blocked +++ /dev/null @@ -1,287 +0,0 @@ -########################################################## -# -# "Blocked" Error Output template for Privoxy. -# -# NOTE: UNLIKE THE OTHER TEMPLATES, THIS ONE USES -# JavaScript write() TO GENERATE THE PAGE IN JS_AWARE -# BROWSERS. SYMBOL SUBSTITUTIONS THAT RESULT IN MULTILINE -# STRINGS WILL BREAK THE JavaScript SYNTAX. -# USE WITH CAUTION. -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written in plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# protocol: -# The request's protocol: http:// or https:// -# hostport: -# The host and port part of the blocked request's URL. -# path: -# The path part of the blocked request's URL. -# path-ue: -# The path part of the blocked request's URL, url-encoded. -# -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# This is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# force-support: -# Privoxy has been compiled with support for forced loading -# of blocked content. In that case, the symbol "force-prefix" is -# avaiable, which translates to the FORCE_PREFIX -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<html> - <head> - <title>Request blocked (Privoxy@@my-hostname@)</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico" type="image/x-icon"> - <style type="text/css"> -#include cgi-style.css - </style> - <script type="text/javascript" language="javascript"> -  - </script> - </head> - <body> - <script type="text/javascript" language="javascript"> -  \ - or <a href="http://@hostport@@force-prefix@@path@">go \ -  \ - to <b>@protocol@@hostport@@path@</b> \ -  \ - anyway</a>. \ -  \ - </p> \ - '); - - } - else - { - document.write('\ - <table cellpadding="20" cellspacing="10" border="0" width="100%">\ - <tr> \ - <td class="status"> \ - BLOCKED \ - </td> \ - <td class="title" width=100%> \ - <h1> \ - This is <a href="@homepage@">Privoxy</a> @version@ on @my-hostname@ (@my-ip-address@), port @my-port@, \ - @if-enabled-display-then@enabled@else-not-enabled-display@disabled@endif-enabled-display@ \ - </h1> \ - </td> \ - </tr> \ - \ - \ -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in \ - <tr> \ - <td class="warning" colspan="2"> \ - <h2>Warning:</h2> \ - <p> \ - <b>Please note that this <font color=red>@code-status@</font> release \ - of the proxy software is not intended for production systems! \ - <br>Use at your own risk. See the <a href="http://www.gnu.org/copyleft/gpl.html">license</a> for details.</b> \ - </p> \ - </td> \ - </tr> \ - \ - \ - <tr> \ - <td class="box" colspan="2"> \ - <h2>Request for blocked URL</h2> \ - <p>Your request for <b>@protocol@@hostport@@path@</b> was blocked. \ - <br>Block reason: @block-reason@ \ - <br><a href="@default-cgi@show-url-info?url=@hostport@@path-ue@" \ - target="_blank">See why this block applies</a> \ - \ - or <a href="http://@hostport@@force-prefix@@path@">go there anyway</a>. \ - \ - </p> \ - </td> \ - </tr> \ - \ - <tr> \ - <td class="box" colspan="2"> \ - <h2>More Privoxy:</h2> \ - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> \ - </td> \ - </tr> \ - \ - <tr> \ - <td class="info" colspan="2"> \ - <big><b>Support and Service via Sourceforge:</b></big> \ - <p> \ - We value your feedback. To provide you with the best support, \ - we ask that you: \ - </p> \ - <ul> \ - <li> \ - use the <a href="http://sourceforge.net/tracker/?group_id=11118&atid=211118">support forum</a> or (better) the \ - <a href="http://sourceforge.net/mail/?group_id=11118">mailing lists</a> to get help. \ - </li> \ - <li> \ - submit banners and all problems with the actions file only through the \ - <a href="javascript:void(window.open(\'http://www.privoxy.org/actions\',\'Feedback\',\'width=600,scrollbars=yes,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no\').focus());">actions \ - file feedback system</a>. \ - </li> \ - <li> \ - submit bugs only through our <a href="http://sourceforge.net/tracker/?group_id=11118&atid=111118">bug tracker</a>. \ - Make sure that the bug has not yet been submitted. \ - </li> \ - <li> \ - submit feature requests only through our <a href="http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=bro…">feature \ - request tracker</a>. \ - </li> \ - </ul> \ - </td> \ - </tr> \ - \ - \ - <tr> \ - <td class="info" colspan="2"> \ - <h2>Local Privoxy support:</h2> \ - \ - \ - <p>You can consult the <a href="@proxy-info-url@">online documentation</a> for more information about this Privoxy installation.</p> \ - \ - \ - \ - <p>Address e-mail questions about this service to \ - <a href="mailto:@admin-address@"><code>@admin-address@</code></a>, \ - who will be glad to help you. \ - </p> \ - \ - </td> \ - </tr> \ - \ - \ - </table> \ - '); - } - //--> - </script> - -# Note: The same small version is used above via JavaScript -# If you make changes here, keep the other version in sync! - - <noscript> - <p class="small" align="center"> - Request blocked by <a href="@default-cgi@" target="_blank">Privoxy</a>: @block-reason@ - <br>See <a href="@default-cgi@show-url-info?url=@hostport@@path-ue@" - target="_blank">why this block applies</a> -  - or <a href="http://@hostport@@force-prefix@@path@">go -  - to <b>@protocol@@hostport@@path@</b> -  - anyway</a>. -  - </p> - </noscript> - - </body> -</html> diff --git a/external/privoxy/templates/cgi-error-404 b/external/privoxy/templates/cgi-error-404 deleted file mode 100644 index c12b564..0000000 --- a/external/privoxy/templates/cgi-error-404 +++ /dev/null @@ -1,149 +0,0 @@ -########################################################## -# -# No-Such-Domain Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>404 - Privoxy Configuration Page not found</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="status"> - 404 - </td> - <td class="title" style="width: 100%"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning" colspan="2"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning" colspan="2"> - <h2>Privoxy Configuration page not found</h2> - <p>You typed in what looks like a URL used to configure - Privoxy, but it cannot be recognised. Maybe it's - for a different Privoxy version, or you typed it - in wrong? Or maybe the Privoxy administrator - has decided to disable the feature.</p> - <p>If you got here by clicking a link in the - configuration interface, please file a bug report!</p> - <p>You can use the menu below to select from the available - configuration options</p> - </td> - </tr> - - <tr> - <td class="box" colspan="2"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info" colspan="2"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info" colspan="2"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/cgi-error-bad-param b/external/privoxy/templates/cgi-error-bad-param deleted file mode 100644 index a1e3f05..0000000 --- a/external/privoxy/templates/cgi-error-bad-param +++ /dev/null @@ -1,156 +0,0 @@ -########################################################## -# -# No-Such-Domain Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy: Bad parameter</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning"> - <h2>Bad parameter to Privoxy configuration page</h2> - <p>You've found a page used to configure Privoxy, but the - parameters (the part of the web page address after the - "?" mark) are wrong or missing.</p> - <p>Possible causes:</p> - <ul> - <li>If you just typed a URL pattern into a form, then you got - something wrong. Press the "back" button on your browser - once and correct what you typed.</li> - <li>If you tried to type in the URL, then you've found a - page where you can't do that. You can only view this - page by following links from elsewhere in the configuration - interface.</li> - <li>If you got here using your browser's "back" button, then - that is deliberately disabled for this page.</li> - <li>If you got here by clicking a link in the - configuration interface, please file a bug report!</li> - </ul> - <p>You can use the menu below to select from the available - configuration options</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>Privoxy Menu:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/cgi-error-disabled b/external/privoxy/templates/cgi-error-disabled deleted file mode 100644 index 9faffc6..0000000 --- a/external/privoxy/templates/cgi-error-disabled +++ /dev/null @@ -1,169 +0,0 @@ -########################################################## -# -# Feature disabled or referrer untrusted Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Configuration Page Disabled</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> -</head> - -<body> - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning"> - <h2>Privoxy Configuration access denied</h2> - <p>Access to <b>@url@</b> has been denied because:</p> - - <ul> - <li>it requires a feature that has been disabled by the Privoxy administrator,</li> - <li>you didn't come here through one of Privoxy's CGI pages, or</li> - <li>the <q>Referer:</q> header is blocked.</li> - </ul> - - <p>Note that the following features which used to be enabled in earlier - releases are now off by default: - </p> - <ul> - <li><a href="@user-manual@config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions</a></li> - <li><a href="@user-manual@config.html#ENABLE-REMOTE-TOGGLE">enable-remote-toggle</a></li> - <li><a href="@user-manual@config.html#ENABLE-REMOTE-HTTP-TOGGLE">enable-remote-http-toggle</a> - (Most likely you don't need this anyway.)</li> - </ul> - - <p>Please refer to the documentation behind the links to learn how to - enable them again and what the consequences are.</p> - - <p>All enabled features are accessible from the - <a href="@default-cgi@">main menu</a>, some of them - are <em>protected</em> with a referrer check though. - If you got caught by the referrer check, but are <strong>absolutely</strong> sure - you know what you are doing, please <a title="Retry from a trusted referrer" - href="@url@">try again</a>.</p> - - <p>If the <q>Referer:</q> header is blocked, you'll have to make an exception for - Privoxy's web interface first. Note that <em>dumb</em> referrer blocking - is a bad idea anyway, as it makes it easier to fingerprint your - requests. Consider using Privoxy's conditional referrer block instead.</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/cgi-error-file b/external/privoxy/templates/cgi-error-file deleted file mode 100644 index 09bf2cb..0000000 --- a/external/privoxy/templates/cgi-error-file +++ /dev/null @@ -1,139 +0,0 @@ -########################################################## -# -# No-Such-Domain Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy: Actions file not found</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning"> - <h2>Actions file not found</h2> - <p>The actions file you are trying to edit (index <code>@f@</code>) - does not exist, or cannot be read.</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>Privoxy Menu:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/cgi-error-file-read-only b/external/privoxy/templates/cgi-error-file-read-only deleted file mode 100644 index bfce277..0000000 --- a/external/privoxy/templates/cgi-error-file-read-only +++ /dev/null @@ -1,146 +0,0 @@ -########################################################## -# -# No-Such-Domain Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy: Cannot write to actions file</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning"> - <h2>Cannot write to actions file</h2> - <p>The actions file you are trying to edit (<code>@f@.action</code>) - could not be written to.</p> - <p>You many not have permission to write to the file - check the file - permissions. On Windows, right-click the file, choose Properties, - and make sure it is not read-only.</p> - <p>Another reason you may see this message is if you have run out of - disk space. If that is the case, then the actions file has been - truncated - if you get further errors, you may need to fix it - using a text editor.</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>Privoxy Menu:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/cgi-error-modified b/external/privoxy/templates/cgi-error-modified deleted file mode 100644 index 3b04b4b..0000000 --- a/external/privoxy/templates/cgi-error-modified +++ /dev/null @@ -1,157 +0,0 @@ -########################################################## -# -# No-Such-Domain Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy: URL out of date</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning"> - <h2>URL out of date - file has changed since it was generated</h2> - <p>The URL you're viewing is out of date. To prevent possible - damage to your configuration file, this action has been ignored. - </p> - <p>Possible causes:</p> - <ul> - <li>If you got here using your browser's "back" button, then - that is deliberately disabled for this page. Please - navigate around the configuration editor using the - links provided.</li> - <li>Perhaps you've got more than one browser window open, and - you're trying to change the same file in both? You can - only have one editor window open at a time. Your other edit - window should continue to function.</li> - <li>You may have modified the file some other way - perhaps by - editing it with a text editor. Simply go back in to the - configuration interface using the links below.</li> - </ul> - <p>You can go back into the edit interface using the menu below, - or by clicking <a href="edit-actions-list?f=@f@">here</a>. - </p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/cgi-error-parse b/external/privoxy/templates/cgi-error-parse deleted file mode 100644 index 695131c..0000000 --- a/external/privoxy/templates/cgi-error-parse +++ /dev/null @@ -1,176 +0,0 @@ -########################################################## -# -# No-Such-Domain Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy: Parse error</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning"> - <h2>Parse error</h2> - <p>The file you're trying to edit is not valid. You need to fix - it using a text editor before you can edit it using the - web-based editor.</p> - <p>This error should only occur if you edited the file using a text - editor. If you managed to take a valid file and break it this - badly using the web-based editor, please file a bug report!</p> - <p>When you've fixed the problem, you can go back into the edit - interface using the menu below, or by clicking <a - href="edit-actions-list?f=@f@">here</a>. - </p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>Problem description:</h2> - <p>@parse-error@</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>The line which caused the problem:</h2> - <pre>@line-raw@</pre> - </td> - </tr> - - <tr> - <td class="box"> - <h2>The line which caused the problem, with comments removed</h2> - <p><code>@line-data@</code></p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>Note</h2> - <p>Only the first error is reported - the file may contain other - errors, as well as the one reported above.</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/cgi-style.css b/external/privoxy/templates/cgi-style.css deleted file mode 100644 index b66c580..0000000 --- a/external/privoxy/templates/cgi-style.css +++ /dev/null @@ -1,173 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/cgi-style.css,v $ -# -# Purpose : Style sheet for the web-based config interface. -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: cgi-style.css,v $ -# Revision 1.12 2007/12/11 21:20:53 fabiankeil -# Make strong warnings red too. -# -# Revision 1.11 2007/12/08 14:29:06 fabiankeil -# Use CSS to let the URL and pattern input fields scale with -# the browser width and try to prevent vertical scroll bars -# if the width is less than 80 characters. Closes #1843596, -# thanks to Gerry Murphy and Lee. -# -# Revision 1.10 2007/01/22 13:12:43 fabiankeil -# White space cosmetics for #include. -# -# Revision 1.9 2006/12/17 17:50:55 fabiankeil -# Add white space workaround for tables -# in show-status CGI page. -# -# Revision 1.8 2002/05/12 15:53:41 jongfoster -# Adding standard comment header with license and CVS log. -# -# -############################################################################## - -/* - * CSS for Privoxy CGI and script output - * - * $Id: cgi-style.css,v 1.12 2007/12/11 21:20:53 fabiankeil Exp $ - */ - -/* - * General rules: Font, Color, Headings, Margins, Links - */ -body,td,th { font-family: arial, helvetica, helv, sans-serif; } -body { background-color: #ffffff; color: #000000; } - -h1 { font-size: 140%; margin: 0px; } -h2 { font-size: 120%; margin: 0px; } -h3 { font-size: 110%; margin: 0px; } - -p,pre { margin-left: 15px; } -li { margin: 2px 15px; } -dl { margin: 2px 15px; } - -a:link { color: #0000dd; text-decoration: none; } -a:visited { color: #330099; text-decoration: none; } -a:active { color: #3333ff; text-decoration: none; } - -/* - * Boxen as Table elements: - */ -td.title { border: solid black 1px; background-color: #dddddd; } -td.box { border: solid black 1px; background-color: #eeeeee; } -td.info { border: solid black 1px; background-color: #ccccff; } -td.warning { border: solid black 1px; background-color: #ffdddd; } - -/* - * Special Table Boxen: for nesting, naked container and for - * the Status field in CGI Output: - */ -td.wrapbox { border: solid black 1px; padding: 5px; } -td.container { padding: 0px; } -td.status { border: solid black 1px; background-color: #ff0000; color: #ffffff; font-size: 300%; font-weight: bolder; } - -/* - * Same Boxen as <div>s: - */ -div.title { border: solid black 1px; background-color: #dddddd; margin: 20px; padding: 20px; } -div.box { border: solid black 1px; background-color: #eeeeee; margin: 20px; padding: 20px; } -div.info { border: solid black 1px; background-color: #ccccff; margin: 20px; padding: 20px; } -div.warning { border: solid black 1px; background-color: #ffdddd; margin: 20px; padding: 20px; } -div.wrapbox { border: solid black 1px; margin: 20px; padding: 5px; } - - -/* - * Bold definitions in <dl>s, grey BG for table headings, transparent (no-bordered) table - */ -dt { font-weight: bold; } -th { background-color: #dddddd; } -table.transparent { border-style: none} - -/* - * Special purpose paragraphs: Small for page footers, - * Important for quoting wrong or dangerous examples, - * Whiteframed for the toggle?mini=y CGI - */ -p.small { font-size: 10px; margin: 0px; } -p.important { border: solid black 1px; background-color: #ffdddd; font-weight: bold; padding: 2px; } -p.whiteframed { margin: 5px; padding: 5px; border: solid black 1px; text-align: center; background-color: #eeeeee; } - -/* - * Links as buttons: - */ - -td.buttons { - padding: 2px; -} - -a.cmd, td.indentbuttons a, td.buttons a { - white-space: nowrap; - width: auto; - padding: 2px; - background-color: #dddddd; - color: #000000; - text-decoration: none; - border-top: 1px solid #ffffff; - border-left: 1px solid #ffffff; - border-bottom: 1px solid #000000; - border-right: 1px solid #000000; -} -a.cmd:hover, td.indentbuttons a:hover, td.buttons a:hover { - background-color: #eeeeee; -} -a.cmd:active, td.indentbuttons a:active, td.buttons a:active { - border-top: 1px solid #000000; - border-left: 1px solid #000000; - border-bottom: 1px solid #ffffff; - border-right: 1px solid #ffffff; -} - - -/* - * Special red emphasis: - */ -em.warning, strong.warning { color: #ff0000 } - -/* - * In show-status we use tables directly behind headlines - * and for some reason or another the headlines are set to - * "margin:0" and leave the tables no air to breath. - * - * A proper fix would be to replace or remove the "margin:0", - * but as this affects every cgi page we do it another time - * and use this workaround until then. - */ -.box table { margin-top: 1em; } - -/* - * Let the URL and pattern input fields scale with the browser - * width and try to prevent vertical scroll bars if the width - * is less than 80 characters. - */ -input.url, input.pattern { width: 95%; } diff --git a/external/privoxy/templates/connect-failed b/external/privoxy/templates/connect-failed deleted file mode 100644 index 3607552..0000000 --- a/external/privoxy/templates/connect-failed +++ /dev/null @@ -1,156 +0,0 @@ -########################################################## -# -# Connect-Failed Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# host-ip: -# The IP address of the host that could not be reached -# hostport: -# The host and port part of the request that lead to this problem -# path: -# The path part of the request that lead to this problem -# -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>503 - Connect failed (Privoxy@@my-hostname@)</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> - <style type="text/css"> -#include cgi-style.css - </style> -</head> - -<body> - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="status"> - 503 - </td> - <td class="title" style="width: 100%"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning" colspan="2"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning" colspan=2> - <h2>Connect failed</h2> - <p>Your request for <a href="@protocol@@hostport@@path@"><b>@protocol@@hostport@@path@</b></a> could - not be fulfilled, because the connection to <b>@host@</b> (@host-ip@) could not be established. - </p> - <p>This is often a temporary failure, so you might just - <a href="@protocol@@hostport@@path@">try again</a>. - </p> - </td> - </tr> - - <tr> - <td class="box" colspan="2"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info" colspan="2"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info" colspan="2"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/default b/external/privoxy/templates/default deleted file mode 100644 index 065aedc..0000000 --- a/external/privoxy/templates/default +++ /dev/null @@ -1,131 +0,0 @@ -########################################################## -# -# Default-CGI Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy@@my-hostname@</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Privoxy Menu:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/edit-actions-add-url-form b/external/privoxy/templates/edit-actions-add-url-form deleted file mode 100644 index 32ee64f..0000000 --- a/external/privoxy/templates/edit-actions-add-url-form +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-add-url-form,v $ -# -# Purpose : Template used to add a URL pattern to the actions file. -# -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-add-url-form,v $ -# Revision 1.18 2007/12/08 14:36:43 fabiankeil -# - Use the shiny new CSS "pattern" class. -# - s@URL Pattern@URL or TAG Pattern@ -# -# Revision 1.17 2007/01/23 16:03:16 fabiankeil -# - Add favicon links. -# - Remove useless W3C validator links. -# -# Revision 1.16 2006/07/18 14:49:13 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.14.2.2 2002/08/23 02:22:53 hal9 -# Fix a perl brain fart with <li> in comments. -# -# Revision 1.14 2002/05/21 19:10:30 oes -# - Added jump target and button style to "cancel" link -# - Fixed title -# -# Revision 1.13 2002/04/10 13:32:53 oes -# Made templates modular -# -# Revision 1.12 2002/04/08 17:08:14 oes -# Cosmetic: make status in title lowercase -# -# Revision 1.11 2002/04/05 16:01:33 oes -# Correct HTML, external Stylesheets, eye candy, some fixes -# -# Revision 1.10 2002/03/26 22:29:56 swa -# we have a new homepage! -# -# Revision 1.9 2002/03/24 15:23:33 jongfoster -# Name changes -# -# Revision 1.8 2002/03/24 11:01:06 swa -# name change -# -# Revision 1.7 2002/03/23 16:18:15 swa -# renamed every reference to the old name with foobar. -# fixed "application foobar application" tag, fixed -# "the foobar" with "foobar". left junkbuster in cvs -# comments and remarks to history untouched. should -# make final rename easier. -# -# Revision 1.6 2002/03/16 15:22:19 jongfoster -# Moving 'alpha' warning to the end of the page -# -# Revision 1.5 2002/03/03 10:29:12 swa -# point users to the right feedback forms, -# not necessarily the developer list. -# -# Revision 1.4 2002/01/23 00:26:45 jongfoster -# Reducing length of URLs -# Where encoded and unencoded versions of a string existed, removing -# the unencoded one. -# -# Revision 1.3 2002/01/17 21:33:00 jongfoster -# Replacing all references to the URL of the config interface -# with @default-cgi@ -# -# Revision 1.2 2002/01/17 21:21:03 jongfoster -# DOS->Unix line endings -# -# Revision 1.1 2001/11/13 00:58:18 jongfoster -# New version of actions file editor templates -# -# -############################################################################## -# -# Standard support: -# -# This file currently produces valid HTML 4.01 Strict. -# -# If you change it, please save the generated page from your web browser -# and then upload it to http://validator.w3.org/ for checking. -# -############################################################################# -# -# Available variables include: -# -# filename -# ver -# section -# -############################################################################# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> -<head> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> - - <title>Privoxy@@my-hostname@: Add URL Pattern</title> - - <script type="text/javascript"> - - </script> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Add URL or TAG Pattern</h2> - <form method="GET" action="edit-actions-add-url" - onSubmit="return validate(u.value);"> - <p> - <input type="hidden" name="f" value="@f@"> - <input type="hidden" name="v" value="@v@"> - <input type="hidden" name="s" value="@s@"> - <input type="text" name="u" value="" size="78" class="pattern"><br> - <input type="submit" value="Submit">   - <input type="reset" value="Reset">   - <a class="cmd" href="edit-actions-list?f=@f@#l@s@">Cancel</a> - </p> - </form> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> - diff --git a/external/privoxy/templates/edit-actions-for-url b/external/privoxy/templates/edit-actions-for-url deleted file mode 100644 index fd673af..0000000 --- a/external/privoxy/templates/edit-actions-for-url +++ /dev/null @@ -1,1425 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-for-url,v $ -# -# Purpose : Template used to edit the actions associated with a -# particular section in an actions file. -# -# -# Copyright : Written by and Copyright (C) 2001-2008 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-for-url,v $ -# Revision 1.56 2008/09/20 10:04:33 fabiankeil -# Remove hide-forwarded-for-headers action which has -# been obsoleted by change-x-forwarded-for{block}. -# -# Revision 1.55 2008/09/19 15:26:29 fabiankeil -# Add change-x-forwarded-for{} action to block or add -# X-Forwarded-For headers. Mostly based on code removed -# before 3.0.7. -# -# Revision 1.54 2008/03/29 12:14:27 fabiankeil -# Remove send-wafer and send-vanilla-wafer actions. -# -# Revision 1.53 2008/03/28 15:13:45 fabiankeil -# Remove inspect-jpegs action. -# -# Revision 1.52 2008/03/15 14:52:36 fabiankeil -# Add CGI editor support for the "disable all filters of this type" -# directives "-client-header-filter", "-server-header-filter", -# "-client-header-tagger" and "-server-header-tagger". -# -# Revision 1.51 2008/03/07 16:46:49 fabiankeil -# Reword limit-connect{} entry. -# -# Revision 1.50 2008/03/04 18:30:44 fabiankeil -# Remove the treat-forbidden-connects-like-blocks action. We now -# use the "blocked" page for forbidden CONNECT requests by default. -# -# Revision 1.49 2008/03/01 14:00:47 fabiankeil -# Let the block action take the reason for the block -# as argument and show it on the "blocked" page. -# -# Revision 1.48 2007/12/11 21:18:55 fabiankeil -# Make forward-override accessible through the CGI editor. -# -# Revision 1.47 2007/12/06 18:21:55 fabiankeil -# Update hide-forwarded-for-headers description. -# -# Revision 1.46 2007/11/10 15:06:10 fabiankeil -# - Add support for +hide-referrer{conditional-forge}. -# - Minor rewordings. -# -# Revision 1.45 2007/05/24 13:38:45 fabiankeil -# Two minor fixes. -# -# Revision 1.44 2007/04/15 16:39:21 fabiankeil -# Introduce tags as alternative way to specify which -# actions apply to a request. At the moment tags can be -# created based on client and server headers. -# -# Revision 1.43 2007/03/29 11:40:34 fabiankeil -# Divide @filter-params@ into @client-header-filter-params@ -# @content-filter-params@ and @server-header-filter-params@. -# -# Revision 1.42 2007/03/20 15:40:00 fabiankeil -# Adjust to new world order with dedicated header-filter actions. -# -# Revision 1.41 2007/01/23 16:03:16 fabiankeil -# - Add favicon links. -# - Remove useless W3C validator links. -# -# Revision 1.40 2006/12/21 13:01:03 fabiankeil -# Prepare for "split-large-forms". -# -# Mention that redirect{} now also understands -# a single pcrs job as argument. -# -# Add some table summaries and remove useless validator link. -# -# Revision 1.39 2006/10/04 17:37:54 fabiankeil -# JavaScript fix for bug report #1570678. -# -# Revision 1.38 2006/09/08 12:06:35 fabiankeil -# Have hide-if-modified-since interpret the random -# range value as minutes instead of hours. Allows -# more fine-grained configuration. -# -# Revision 1.37 2006/09/05 18:20:14 fabiankeil -# Sorted alphabetically, fixed spelling mistakes -# and shortened some descriptions. -# -# Revision 1.36 2006/08/14 08:29:17 fabiankeil -# Split filter-headers{} into filter-client-headers{} -# and filter-server-headers{}. -# -# Revision 1.35 2006/08/03 02:46:42 david__schmidt -# Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/ -# -# Revision 1.34 2006/07/18 14:49:13 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.29.2.5 2004/10/05 03:17:26 david__schmidt -# Typo: inspect_jpegs, not inspect-jpegs in form -# -# Revision 1.29.2.4 2004/10/03 12:53:46 david__schmidt -# Add the ability to check jpeg images for invalid -# lengths of comment blocks. Defensive strategy -# against the exploit: -# Microsoft Security Bulletin MS04-028 -# Buffer Overrun in JPEG Processing (GDI+) Could -# Allow Code Execution (833987) -# Enabled with +inspect-jpegs in actions files. -# -# Revision 1.29.2.3 2002/08/23 02:22:53 hal9 -# Fix a perl brain fart with <li> in comments. -# -# Revision 1.29.2.1 2002/08/02 12:51:42 oes -# Added top submit button; Consistency with docs: Change default name for action from hide-referer to hide-referrer -# -# Revision 1.29 2002/05/21 19:10:57 oes -# Fixed JavaScript error -# -# Revision 1.28 2002/05/14 21:36:38 oes -# - Renamed prevent-(setting/reading)-cookies to -# crunch-(incoming/outgoing)-cookies -# - Renamed helplink export to actions-help-prefix -# - Restored alphabetical order of actions -# -# Revision 1.27 2002/04/26 22:55:26 jongfoster -# Removing the alternating colors because they've been wrong -# since the actions renames, they're high maintenance, they -# don't look particularly good, and now there are gaps between -# the table cells we don't need them. -# -# Revision 1.26 2002/04/26 21:55:17 jongfoster -# Cosmetic change: Making the +filter UI look the same as -# the other actions. -# -# Revision 1.25 2002/04/26 21:37:50 jongfoster -# Fixing all(?) the substitutions that were broken in the -# recent actions rename. -# -# Revision 1.24 2002/04/26 18:24:28 jongfoster -# Fixing typos in help hyperlinks -# -# Revision 1.23 2002/04/26 12:57:02 oes -# Actions renamed, alphabetically sorted, comments fixed, and names linked to help -# -# Revision 1.22 2002/04/10 13:32:53 oes -# Made templates modular -# -# Revision 1.21 2002/04/08 17:05:18 oes -# Inline a style exception -# -# Revision 1.20 2002/04/05 16:01:30 oes -# Correct HTML, external Stylesheets, eye candy, some fixes -# -# Revision 1.19 2002/03/26 22:29:56 swa -# we have a new homepage! -# -# Revision 1.18 2002/03/24 16:32:08 jongfoster -# Removing logo option -# -# Revision 1.17 2002/03/24 15:23:33 jongfoster -# Name changes -# -# Revision 1.16 2002/03/24 11:01:06 swa -# name change -# -# Revision 1.15 2002/03/23 16:18:15 swa -# renamed every reference to the old name with foobar. -# fixed "application foobar application" tag, fixed -# "the foobar" with "foobar". left junkbuster in cvs -# comments and remarks to history untouched. should -# make final rename easier. -# -# Revision 1.14 2002/03/16 15:22:19 jongfoster -# Moving 'alpha' warning to the end of the page -# -# Revision 1.13 2002/03/16 14:28:38 jongfoster -# First version of modular filters support -# -# Revision 1.12 2002/03/12 01:42:50 oes -# Introduced modular filters -# -# Revision 1.11 2002/03/08 18:19:14 jongfoster -# Adding +image-blocker{pattern} option to edit interface -# -# Revision 1.10 2002/03/03 10:29:12 swa -# point users to the right feedback forms, -# not necessarily the developer list. -# -# Revision 1.9 2002/01/23 00:26:45 jongfoster -# Reducing length of URLs -# Where encoded and unencoded versions of a string existed, removing -# the unencoded one. -# -# Revision 1.8 2002/01/17 21:33:00 jongfoster -# Replacing all references to the URL of the config interface -# with @default-cgi@ -# -# Revision 1.7 2002/01/17 21:21:03 jongfoster -# DOS->Unix line endings -# -# Revision 1.6 2001/11/22 21:58:41 jongfoster -# Adding action +no-cookies-keep -# -# Revision 1.5 2001/11/13 21:12:17 jongfoster -# Added support for the following actions: -# +downgrade, +limit-connect, +no-compression -# -# Revision 1.4 2001/11/13 00:58:18 jongfoster -# New version of actions file editor templates -# -# -############################################################################## -# -# Browser support for the JavaScript on this page: -# MS Internet Explorer 5.5 - Tested, Yes -# Netscape 6.0 - Tested, Yes -# Netscape 4.75 - Tested, NO -# Opera 5.12 - Tested, NO -# MS Internet Explorer 4+ - Untested, Yes -# MS IE 3.x, NS3.x - Untested, NO -# Mozilla >=0.6 - Untested, Yes -# -# All browsers should work, you just might not get the pretty DHTML effects. -# -# The effects that only work under the browsers marked "Yes" above are: -# - Text edit boxes that won't have any effect are disabled. -# - Table rows containing additional settings are hidden if the feature in -# question is disabled. -# -# There are major kludges to get around these problems with NS4, but they -# screw up the HTML too much for other browsers. If anyone wants to try, -# here's some descriptions of the kludges: -# http://www.webreference.com/js/tips/991114.html -# http://www.webreference.com/dhtml/column12/outDisplay.html -# -# If you're favorite browser isn't listed, please test and add it. -# -# -############################################################################# -# -# Standard support: -# -# This file currently produces valid HTML 4.01 Strict. -# -# If you change it, please save the generated page from your web browser -# and then upload it to http://validator.w3.org/ for checking. -# -############################################################################# -# -# Available variables include: -# -# action-name-y -# action-name-n -# action-name-x -# -# deanimate-gifs-param-first -# deanimate-gifs-param-last -# hide-from-param-block -# hide-from-param-custom -# hide-from-param -# hide-referrer-param-forge -# hide-referrer-param-block -# hide-referrer-param-custom -# hide-referrer-param -# hide-user-agent-param -# image-blocker-param-pattern -# image-blocker-param-blank -# image-blocker-param-custom -# -# -############################################################################# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> - - <title>Privoxy@@my-hostname@: Edit actions</title> - -<style type="text/css"> -td.action { font-weight: bold; - font-style: italic; - white-space: nowrap } -td.subaction { font-style: italic } -th { font-weight: bold; } -# This is the key to the color names below: -# bg=background, en="Enable", dis="Disable", noc="No Change", hdr=header -# 1=odd rows, 2=even rows, h=Table header -tr.hdr { background-color: #999999 } -tr.bg1 { background-color: #eeeeee } -td.en1 { background-color: #ddffdd } -td.dis1 { background-color: #ffdddd } -td.noc1 { background-color: #ddddff } -th.enh { background-color: #99ff99 } -th.dish { background-color: #ff9999 } -th.noch { background-color: #9999ff } -table.wide { padding: 5px; } -td.green { border: solid black 1px; background-color: #ddffdd; } -</style> - - - -<script type="text/javascript"> - -</script> -</head> - -<body> - - -<form method="GET" action="edit-actions-submit" id="myform" name="myform"> - - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - - <tr> - <td class="box"> - <h2>Edit Actions - <input type="hidden" name="f" value="@f@"> - <input type="hidden" name="v" value="@v@"> - <input type="hidden" name="s" value="@s@"> - </h2> - </td> - </tr> - - <tr> - <td class="green" align="center"> - <p><input type="submit" value="Submit" name="Submit"></p> - </td> - </tr> - - -<tr><td class="wrapbox"> - - -<form method="GET" action="edit-actions-submit" id="myform" name="myform"> - <h2>Edit Actions (Section 1)</h2> - - - <table summary="Action section 1" border="0" cellspacing="2" width="100%" class="wide"> - <tr class="hdr" align="left"> - <th class="enh" align="center">Enable</th> - <th class="dish" align="center">Disable</th> - <th class="noch" align="center">No Change</th> - <th>Action</th> - <th>Description</th> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="add_header" id="add_header_y" value="Y" @add-header-y@ - onclick="show_add_header_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="add_header" value="N" @add-header-n@ - onclick="show_add_header_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="add_header" value="X" @add-header-x@ - onclick="show_add_header_opts(false)"></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@ADD-HEADER">add-header</a></td> - <td>Adds HTTP headers.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="add_header_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>Editing the settings for this option, or turning - it on if it was off, is not yet supported using this web-based - editor.</td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="block" value="Y" @block-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="block" value="N" @block-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="block" value="X" @block-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@BLOCK">block</a></td> - <td>Block the request.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="block_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>Block reason to tell the user:<br> - <input type="text" name="block_mode" size="40" value="@block-param@"> - </td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="change_x_forwarded_for" id="change_x_forwarded_for_y" value="Y" @change-x-forwarded-for-y@ - onclick="show_change_x_forwarded_for_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="change_x_forwarded_for" value="N" @change-x-forwarded-for-n@ - onclick="show_change_x_forwarded_for_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="change_x_forwarded_for" value="X" @change-x-forwarded-for-x@ - onclick="show_change_x_forwarded_for_opts(false)"></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CHANGE-X-FORWARDED-FOR">change-x-forwarded-for</a></td> - <td>Specifies whether to block or add X-Forwarded-For headers.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="change_x_forwarded_for_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="change_x_forwarded_for_mode" value="block" - id="change_x_forwarded_for_mode_block" @change-x-forwarded-for-param-block@><label - for="change_x_forwarded_for_mode_block">Block the header.</label><br> - <input type="radio" name="change_x_forwarded_for_mode" value="add" - id="change_x_forwarded_for_mode_add" @change-x-forwarded-for-param-add@><label - for="change_x_forwarded_for_mode_add">Add the header.</label><br> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1"> </td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="client_header_filter_all" id="client_header_filter_all_n" value="N" @client-header-filter-all-n@ ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="client_header_filter_all" id="client_header_filter_all_x" value="X" @client-header-filter-all-x@ ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CLIENT-HEADER-FILTER">client-header-filter</a> *</td> - <td>Filter the client headers. - You can use the radio buttons on this line to disable - all client-header filters applied by previous rules, and/or - you can enable or disable the filters individually below.</td> - </tr> -@client-header-filter-params@ - <tr class="bg1" align="left" valign="top"> - <td class="en1"> </td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="client_header_tagger_all" id="client_header_tagger_all_n" value="N" @client-header-tagger-all-n@ ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="client_header_tagger_all" id="client_header_tagger_all_x" value="X" @client-header-tagger-all-x@ ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CLIENT-HEADER-TAGGER">client-header-tagger</a> *</td> - <td>Create tags based on the client headers. - You can use the radio buttons on this line to disable - all client-header taggers applied by previous rules, and/or - you can enable or disable the taggers individually below.</td> - </tr> -@client-header-tagger-params@ - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="content_type_overwrite" value="Y" @content-type-overwrite-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="content_type_overwrite" value="N" @content-type-overwrite-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="content_type_overwrite" value="X" @content-type-overwrite-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CONTENT_TYPE_OVERWRITE">content-type-overwrite</a></td> - <td>Replace Content-Type header. By default it only applies to - text documents, but if you know what you're doing you - can enable force-text-mode to modify binary content types as well.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="content_type_overwrite_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>New Content-Type:<br> - <input type="text" name="content_type_overwrite_mode" size="40" - value="@content-type-overwrite-param@"></td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="crunch_client_header" id="crunch_client_header_y" value="Y" @crunch-client-header-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="crunch_client_header" value="N" @crunch-client-header-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="crunch_client_header" value="X" @crunch-client-header-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-CLIENT-HEADER">crunch-client-header</a></td> - <td>Remove header(s) matching the supplied pattern.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="crunch_client_header_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>Header string to suppress:<br> - <input type="text" name="crunch_client_header_mode" size="40" - value="@crunch-client-header-param@"></td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="crunch_if_none_match" value="Y" @crunch-if-none-match-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="crunch_if_none_match" value="N" @crunch-if-none-match-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="crunch_if_none_match" value="X" @crunch-if-none-match-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH_IF_NONE_MATCH">crunch-if-none-match</a></td> - <td>Remove If-None-Match header. Useful for filter testing - and to make sure the header can't be used to track your visits.</td> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="crunch_incoming_cookies" value="Y" @crunch-incoming-cookies-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="crunch_incoming_cookies" value="N" @crunch-incoming-cookies-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="crunch_incoming_cookies" value="X" @crunch-incoming-cookies-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</a></td> - <td>Prevent the website from setting HTTP cookies on your system.</td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="crunch_outgoing_cookies" value="Y" @crunch-outgoing-cookies-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="crunch_outgoing_cookies" value="N" @crunch-outgoing-cookies-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="crunch_outgoing_cookies" value="X" @crunch-outgoing-cookies-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</a></td> - <td>Prevent the website from reading HTTP cookies from your system.</td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="crunch_server_header" id="crunch_server_header_y" value="Y" @crunch-server-header-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="crunch_server_header" value="N" @crunch-server-header-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="crunch_server_header" value="X" @crunch-server-header-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-SERVER-HEADER">crunch-server-header</a></td> - <td>Remove server header(s) matching the supplied pattern.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="crunch_server_header_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>Header string to suppress:<br> - <input type="text" name="crunch_server_header_mode" size="40" - value="@crunch-server-header-param@"></td> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="deanimate_gifs" id="deanimate_gifs_y" value="Y" @deanimate-gifs-y@ - onclick="show_deanimate_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="deanimate_gifs" value="N" @deanimate-gifs-n@ - onclick="show_deanimate_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="deanimate_gifs" value="X" @deanimate-gifs-x@ - onclick="show_deanimate_opts(false)"></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@DEANIMATE-GIFS">deanimate-gifs</a></td> - <td>Replace animated GIFs with their (first/last) frame.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="deanimate_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>Use the <input type="radio" name="deanimate_gifs_mode" - value="first" id="deanimate_first" @deanimate-gifs-param-first@><label - for="deanimate_first">first frame</label>   <input - type="radio" name="deanimate_gifs_mode" value="last" - id="deanimate_last" @deanimate-gifs-param-last@><label - for="deanimate_last">last frame</label></td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="downgrade_http_version" value="Y" @downgrade-http-version-y@></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="downgrade_http_version" value="N" @downgrade-http-version-n@></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="downgrade_http_version" value="X" @downgrade-http-version-x@></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@DOWNGRADE-HTTP-VERSION" - >downgrade-http-version</a></td> - <td>Change HTTP/1.1 requests to HTTP/1.0. Only change if you know - what you're doing!</td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="fast_redirects" value="Y" @fast-redirects-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="fast_redirects" value="N" @fast-redirects-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="fast_redirects" value="X" @fast-redirects-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@FAST-REDIRECTS">fast-redirects</a></td> - <td>Bypass some click-tracking URLs.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="fast-redirects_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td> - <input type="radio" name="fast_redirects_mode" - value="simple-check" id="fast_redirects_simple_check" @fast-redirects-param-simple-check@><label - for="fast_redirects_simple_check">Simple check.</label> - <br> - <input type="radio" name="fast_redirects_mode" value="check-decoded-url" - id="fast_redirects_check_decoded_url" @fast-redirects-param-check-decoded-url@><label - for="fast_redirects_check_decoded_url">Decode URL before checking.</label></td> - </tr> - - </table> - <p> - <input type="hidden" name="f" value="@f@"> - <input type="hidden" name="v" value="@v@"> - <input type="hidden" name="s" value="@s@"> - <input type="submit" value="Submit changes in Section 1" name="Submit"> - </p> - </form> - </td></tr> - <tr><td class="wrapbox"> - <form method="GET" action="edit-actions-submit" id="myform-2" name="myform"> - <h2>Edit Actions (Section 2)</h2> - <table summary="Action section 2" border="0" cellspacing="2" width="100%" class="wide"> - <tr class="hdr" align="left"> - <th class="enh" align="center">Enable</th> - <th class="dish" align="center">Disable</th> - <th class="noch" align="center">No Change</th> - <th>Action</th> - <th>Description</th> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1"> </td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="filter_all" id="filter_all_n" value="N" @filter-all-n@ ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="filter_all" id="filter_all_x" value="X" @filter-all-x@ ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@FILTER">filter</a> *</td> - <td>Filter the website through regular expression - filters. You can use the radio buttons on this line to disable - all filters applied by previous rules, and/or you can enable or - disable the filters individually below.</td> - </tr> - -@content-filter-params@ - - - </table> - <p> - <input type="hidden" name="f" value="@f@"> - <input type="hidden" name="v" value="@v@"> - <input type="hidden" name="s" value="@s@"> - <input type="submit" value="Submit changes in Section 2" name="Submit"> - </p> - </form> - </td></tr> - <tr><td class="wrapbox"> - <form method="GET" action="edit-actions-submit" id="myform-3" name="myform"> - <h2>Edit Actions (Section 3)</h2> - <table summary="Action section 3" border="0" cellspacing="2" width="100%" class="wide"> - <tr class="hdr" align="left"> - <th class="enh" align="center">Enable</th> - <th class="dish" align="center">Disable</th> - <th class="noch" align="center">No Change</th> - <th>Action</th> - <th>Description</th> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="force_text_mode" value="Y" @force-text-mode-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="force_text_mode" value="N" @force-text-mode-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="force_text_mode" value="X" @force-text-mode-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@FORCE_TEXT_MODE">force-text-mode</a></td> - <td> - Enable filtering on documents whose Content-Type wasn't recognized as text. - Do think twice, nothing is alright. - </td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="forward_override" id="forward_override_y" value="Y" @forward-override-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="forward_override" id="forward_override_n" value="N" @forward-override-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="forward_override" id="forward_override_x" value="X" @forward-override-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@FORWARD-OVERRIDE">forward-override</a></td> - <td>Override forward directives in the configuration file. - Note that the <a href="@user-manual@actions-file.html#FORWARD-OVERRIDE">parameter syntax</a> - isn't checked until the action is used. <strong class="warning">Syntax errors - will cause Privoxy to exit.</strong></td> - </tr> - <tr class="bg1" align="left" valign="top" id="forward_override_language_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td> - Overriding forward directive:<br> - <input type="text" name="forward_override_param" - id="forward_override_param" size="40" - value="@forward-override-param@"><br> - </td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="handle_as_empty_document" value="Y" @handle-as-empty-document-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="handle_as_empty_document" value="N" @handle-as-empty-document-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="handle_as_empty_document" value="X" @handle-as-empty-document-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HANDLE_AS_EMPTY_DOCUMENT">handle-as-empty-document</a></td> - <td> - Block with an <em>empty</em> document instead of an Image or HTML message. - The <em>empty</em> document contains only a space and can safely be parsed - as JavaScript or Style Sheet. Use content-type-overwrite to specify the - Content-Type, default is <q>text/html</q>. - </td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="handle_as_image" value="Y" @handle-as-image-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="handle_as_image" value="N" @handle-as-image-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="handle_as_image" value="X" @handle-as-image-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HANDLE-AS-IMAGE">handle-as-image</a></td> - <td>Request is for an image (only useful in conjunction with the <i><b><a href="@user-manual@@actions-help-prefix@BLOCK">block</a></b></i> - and <i><b><a href="@user-manual@@actions-help-prefix@SET-IMAGE-BLOCKER">set-image-blocker</a></b></i> actions).</td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="hide_accept_language" id="hide_accept_language_y" value="Y" @hide-accept-language-y@ - onclick="show_hide_accept_language_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="hide_accept_language" id="hide_accept_language_n" value="N" @hide-accept-language-n@ - onclick="show_hide_accept_language_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="hide_accept_language" id="hide_accept_language_x" value="X" @hide-accept-language-x@ - onclick="show_hide_accept_language_opts(false)" - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-ACCEPT-LANGUAGE">hide-accept-language</a></td> - <td>Pretend to have different language settings. (Makes a fake User-Agent more believable, - but you may end up with content in the language you pretended to understand.)</td> - </tr> - <tr class="bg1" align="left" valign="top" id="hide_accept-language_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="hide_accept_language_mode" value="block" - onclick="hide_accept_language_param_disable(true)" - @hide-accept-language-param-block@ id="hide_accept_language_mode_block"><label - for="hide_accept_language_mode_block">Remove Accept-Language header without replacement.</label> - <br> - <input type="radio" name="hide_accept_language_mode" value="CUSTOM" - onclick="hide_accept_language_param_disable(false)" - @hide-accept-language-param-custom@ id="hide_accept_language_mode_set"><label - for="hide_accept_language_mode_set">Fake these language settings:</label><br> - <input type="text" name="hide_accept_language_param" - id="hide_accept_language_param" size="40" - value="@hide-accept-language-param@"><br> - </td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="hide_content_disposition" id="hide_content_disposition_y" value="Y" @hide-content-disposition-y@ - onclick="show_hide_content_disposition_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="hide_content_disposition" id="hide_content_disposition_n" value="N" @hide-content-disposition-n@ - onclick="show_hide_content_disposition_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="hide_content_disposition" id="hide_content_disposition_x" value="X" @hide-content-disposition-x@ - onclick="show_hide_content_disposition_opts(false)" - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-CONTENT-DISPOSITION">hide-content-disposition</a></td> - <td>Block or overwrite the content-disposition header. Useful to view a document inside the browser, - even if you were supposed to save it first, or to change the suggested file name.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="hide_content_disposition_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="hide_content_disposition_mode" value="block" - onclick="hide_content_disposition_param_disable(true)" - @hide-content-disposition-param-block@ id="hide_content_disposition_mode_block"><label - for="hide_content_disposition_mode_block">Remove content-disposition header without replacement.</label> - <br> - <input type="radio" name="hide_content_disposition_mode" value="CUSTOM" - onclick="hide_content_disposition_param_disable(false)" - @hide-content-disposition-param-custom@ id="hide_content_disposition_mode_set"><label - for="hide_content_disposition_mode_set">Overwrite content-dispostion header with:</label><br> - <input type="text" name="hide_content_disposition_param" - id="hide_content_disposition_param" size="40" - value="@hide-content-disposition-param@"><br> - </td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="hide_from_header" id="hide_from_header_y" value="Y" @hide-from-header-y@ - onclick="show_hide_from_header_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="hide_from_header" value="N" @hide-from-header-n@ - onclick="show_hide_from_header_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="hide_from_header" value="X" @hide-from-header-x@ - onclick="show_hide_from_header_opts(false)"></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-FROM-HEADER">hide-from-header</a></td> - <td>Stop old web browsers from sending the user's e-mail address with - every request.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="hide_from_header_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="hide_from_header_mode" value="block" - onclick="hide_from_header_param_disable(true);" - @hide-from-header-param-block@ id="hide_from_header_mode_block"><label - for="hide_from_header_mode_block">Remove completely</label><br> - <input type="radio" name="hide_from_header_mode" value="CUSTOM" - onclick="hide_from_header_param_disable(false);" - @hide-from-header-param-custom@ id="hide_from_header_mode_set"><label - for="hide_from_header_mode_set">Fake e-mail address:</label><br> - <input type="text" name="hide_from_header_param" id="hide_from_header_param" - size="40" value="@hide-from-header-param@"></td> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="hide_if_modified_since" value="Y" @hide-if-modified-since-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="hide_if_modified_since" value="N" @hide-if-modified-since-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="hide_if_modified_since" value="X" @hide-if-modified-since-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE_IF_MODIFIED_SINCE">hide-if-modified-since</a></td> - <td>Remove or randomize the If-Modified-Since header.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="hide_if-modifed-since_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="hide_if_modified_since_mode" value="block" - onclick="hide_if_modified_since_param_disable(true)" - @hide-if-modified-since-param-block@ id="hide_if_modified_since_mode_block"><label - for="hide_if_modified_since_mode_block">Remove without replacement.</label> - Useful for filter testing.<br> - <input type="radio" name="hide_if_modified_since_mode" value="CUSTOM" - onclick="hide_if_modified_since_param_disable(true)" - @hide-if-modified-since-param-custom@ id="hide_if_modified_since_mode_set"><label - for="hide_if_modified_since_mode_set">Add random amount of seconds in the range of</label> - <input type="text" name="hide_if_modified_since_param" - id="hide_if_modified_since_param" size="4" - value="@hide-if-modified-since-param@"> minute(s). - To appreciate this option a small amount of paranoia is required, - but at least in theory the If-Modified-Since header could be used - to keep track of your visits. - </td> - </tr> - - </table> - <p> - <input type="hidden" name="f" value="@f@"> - <input type="hidden" name="v" value="@v@"> - <input type="hidden" name="s" value="@s@"> - <input type="submit" value="Submit changes in Section 3" name="Submit"> - </p> - </form> - </td></tr> - <tr><td class="wrapbox"> - <form method="GET" action="edit-actions-submit" id="myform-4" name="myform"> - <h2>Edit Actions (Section 4)</h2> - <table summary="Action section 4" border="0" cellspacing="2" width="100%" class="wide"> - <tr class="hdr" align="left"> - <th class="enh" align="center">Enable</th> - <th class="dish" align="center">Disable</th> - <th class="noch" align="center">No Change</th> - <th>Action</th> - <th>Description</th> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="hide_referrer" id="hide_referrer_y" value="Y" @hide-referrer-y@ - onclick="show_hide_referrer_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="hide_referrer" id="hide_referrer_n" value="N" @hide-referrer-n@ - onclick="show_hide_referrer_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="hide_referrer" id="hide_referrer_x" value="X" @hide-referrer-x@ - onclick="show_hide_referrer_opts(false)" - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-REFERRER">hide-referrer</a></td> - <td>Helps prevent tracking by not sending the URL of the previous web - page. </td> - </tr> - <tr class="bg1" align="left" valign="top" id="hide_referrer_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="hide_referrer_mode" value="block" - onclick="hide_referrer_param_disable(true)" - @hide-referrer-param-block@ id="hide_referrer_mode_block"><label - for="hide_referrer_mode_block">Remove completely</label> (breaks images - on some free web hosts).<br> - <input type="radio" name="hide_referrer_mode" value="forge" - onclick="hide_referrer_param_disable(true)" - @hide-referrer-param-forge@ id="hide_referrer_mode_forge"><label - for="hide_referrer_mode_forge">Fake as the root directory of the - site</label> (fools checks for in-site links.)<br> - <input type="radio" name="hide_referrer_mode" value="CUSTOM" - onclick="hide_referrer_param_disable(false)" - @hide-referrer-param-custom@ id="hide_referrer_mode_set"><label - for="hide_referrer_mode_set">Fake as this web address:</label><br> - <input type="text" name="hide_referrer_param" - id="hide_referrer_param" size="40" - value="@hide-referrer-param@"><br> - <input type="radio" name="hide_referrer_mode" value="conditional-block" - onclick="hide_referrer_param_disable(true)" - @hide-referrer-param-conditional-block@ id="hide_referrer_mode_conditional-block"><label - for="hide_referrer_mode_conditional-block">Remove completely if host has changed, - but don't touch in-site referrers. - Less suspicious than the options above.</label><br> - <input type="radio" name="hide_referrer_mode" value="conditional-forge" - onclick="hide_referrer_param_disable(true)" - @hide-referrer-param-conditional-forge@ id="hide_referrer_mode_conditional-forge"><label - for="hide_referrer_mode_conditional-forge">Forge referrer if host has - changed, but don't touch in-site referrers.</label><br> - </td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="hide_user_agent" id="hide_user_agent_y" value="Y" @hide-user-agent-y@ - onclick="show_user_agent_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="hide_user_agent" value="N" @hide-user-agent-n@ - onclick="show_user_agent_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="hide_user_agent" value="X" @hide-user-agent-x@ - onclick="show_user_agent_opts(false)"></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-USER-AGENT">hide-user-agent</a></td> - <td>Pretend to be using a different web browser.  (May cause problems with broken web sites).</td> - </tr> - <tr class="bg1" align="left" valign="top" id="user_agent_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>User Agent string to send:<br> - <input type="text" name="hide_user_agent_mode" size="40" - value="@hide-user-agent-param@"></td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="limit_connect" id="limit_connect_y" value="Y" @limit-connect-y@ - onclick="show_limit_connect_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="limit_connect" value="N" @limit-connect-n@ - onclick="show_limit_connect_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="limit_connect" value="X" @limit-connect-x@ - onclick="show_limit_connect_opts(false)"></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@LIMIT-CONNECT">limit-connect</a></td> - <td>Limit which ports are allowed in HTTP CONNECT requests. These requests are - used to tunnel SSL and other protocols through HTTP proxies.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="limit_connect_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>Legal ports (comma separated, ranges allowed):<br> - <input type="text" name="limit_connect_mode" size="40" - value="@limit-connect-param@"></td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="overwrite_last_modified" value="Y" @overwrite-last-modified-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="overwrite_last_modified" value="N" @overwrite-last-modified-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="overwrite_last_modified" value="X" @overwrite-last-modified-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@OVERWRITE_LAST_MODIFIED">overwrite-last-modified</a></td> - <td>Remove or randomize the Last-Modified header.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="overwrite_last_modified_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="overwrite_last_modified_mode" value="block" - onclick="overwrite_last_modified_param_disable(true)" - @overwrite-last-modified-param-block@ id="overwrite_last_modified_mode_block"><label - for="overwrite_last_modified_mode_block">Remove without replacement.</label> - <br> - <input type="radio" name="overwrite_last_modified_mode" value="reset-to-request-time" - onclick="overwrite_last_modified_param_disable(true)" - @overwrite-last-modified-param-reset-to-request-time@ - id="overwrite_last_modified_mode_reset-to-request-time"><label - for="overwrite_last_modified_mode_reset-to-request-time">Reset to the time of the request.</label> - <br> - <input type="radio" name="overwrite_last_modified_mode" value="randomize" - onclick="overwrite_last_modified_param_disable(true)" - @overwrite-last-modified-param-randomize@ - id="overwrite_last_modified_mode_randomize"><label - for="overwrite_last_modified_mode_randomize">Overwrite with random value - between original header value and the time of the request.</label> - </td> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="prevent_compression" value="Y" @prevent-compression-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="prevent_compression" value="N" @prevent-compression-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="prevent_compression" value="X" @prevent-compression-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@PREVENT-COMPRESSION">prevent-compression</a></td> - <td>Disables compression. Compressed web pages are faster to - download, but cannot be filtered with <a href="@user-manual@@actions-help-prefix@FILTER"><b>filter</b></a> - or <a href="@user-manual@@actions-help-prefix@KILL-POPUPS"><b>kill-popups</b></a> - if your Privoxy version was build without zlib support.</td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="redirect" value="Y" @redirect-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="redirect" value="N" @redirect-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="redirect" value="X" @redirect-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@REDIRECT">redirect</a></td> - <td>Redirect to another address. - </tr> - <tr class="bg1" align="left" valign="top" id="redirect_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td>Static address or a single pcrs command to redirect to a rewritten version of the original URL:<br> - <input type="text" name="redirect_mode" size="40" - value="@redirect-param@"></td> - </tr> - - <tr class="bg1" align="left" valign="top"> - <td class="en1"> </td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="server_header_filter_all" id="server_header_filter_all_n" value="N" @server-header-filter-all-n@ ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="server_header_filter_all" id="server_header_filter_all_x" value="X" @server-header-filter-all-x@ ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@SERVER-HEADER-FILTER">server-header-filter</a> *</td> - <td>Filter the server headers. - You can use the radio buttons on this line to disable - all server-header filters applied by previous rules, and/or - you can enable or disable the filters individually below.</td> - </tr> -@server-header-filter-params@ - <tr class="bg1" align="left" valign="top"> - <td class="en1"> </td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="server_header_tagger_all" id="server_header_tagger_all_n" value="N" @server-header-tagger-all-n@ ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="server_header_tagger_all" id="server_header_tagger_all_x" value="X" @server-header-tagger-all-x@ ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@SERVER-HEADER-TAGGER">server-header-tagger</a> *</td> - <td>Create tags based on the server headers. - You can use the radio buttons on this line to disable - all server-header taggers applied by previous rules, and/or - you can enable or disable the taggers individually below.</td> - </tr> -@server-header-tagger-params@ - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="session_cookies_only" value="Y" @session-cookies-only-y@ - ></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="session_cookies_only" value="N" @session-cookies-only-n@ - ></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="session_cookies_only" value="X" @session-cookies-only-x@ - ></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@SESSION-COOKIES-ONLY">session-cookies-only</a></td> - <td>HTTP cookies set by the website are changed to temporary - ("per-session") ones, which only last until you close your web - browser. This will allow you to use sites that require cookies, but - sites will not be able to track you across sessions. For this to - be useful, you should disable - <a href="@user-manual@@actions-help-prefix@CRUNCH-OUTGOING-COOKIES"><b>crunch-outgoing-cookies</b></a> and - <a href="@user-manual@@actions-help-prefix@CRUNCH-INCOMING-COOKIES"><b>crunch-incoming-cookies</b></a>.</td> - </tr> - <tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" - name="set_image_blocker" id="set_image_blocker_y" value="Y" @set-image-blocker-y@ - onclick="show_set_image_blocker_opts(true)"></td> - <td class="dis1" align="center" valign="middle"><input type="radio" - name="set_image_blocker" value="N" @set-image-blocker-n@ - onclick="show_set_image_blocker_opts(false)"></td> - <td class="noc1" align="center" valign="middle"><input type="radio" - name="set_image_blocker" value="X" @set-image-blocker-x@ - onclick="show_set_image_blocker_opts(false)"></td> - <td class="action"><a href="@user-manual@@actions-help-prefix@SET-IMAGE-BLOCKER">set-image-blocker</a></td> - <td>Specifies how to block images.</td> - </tr> - <tr class="bg1" align="left" valign="top" id="set_image_blocker_opts"> - <td class="en1"> </td> - <td class="dis1"> </td> - <td class="noc1"> </td> - <td> </td> - <td><input type="radio" name="set_image_blocker_mode" - onclick="set_image_blocker_param_disable(true)" - value="pattern" id="set_image_blocker_mode_pattern" - @set-image-blocker-param-pattern@><label - for="set_image_blocker_mode_pattern">Send a pattern (<img - src="send-banner?type=p" width="12" height="12" - alt="pattern">)</label><br> - <input type="radio" name="set_image_blocker_mode" value="blank" - onclick="set_image_blocker_param_disable(true)" - id="set_image_blocker_mode_blank" @set-image-blocker-param-blank@><label - for="set_image_blocker_mode_blank">Send a 1x1 transparent GIF</label><br> - <input type="radio" name="set_image_blocker_mode" value="CUSTOM" - onclick="set_image_blocker_param_disable(false)" - id="set_image_blocker_mode_set" @set-image-blocker-param-custom@><label - for="set_image_blocker_mode_set">Redirect - the browser to this image URL:</label><br> - <input type="text" name="set_image_blocker_param" id="set_image_blocker_param" - size="40" value="@set-image-blocker-param@"></td> - </tr> - </table> - - - <p> - <input type="hidden" name="f" value="@f@"> - <input type="hidden" name="v" value="@v@"> - <input type="hidden" name="s" value="@s@"> - <input type="submit" value="Submit changes in Section 4" name="Submit"> - </p> - </form> - -</td></tr> - - <tr> - <td class="green" align="center"> - <p><input type="submit" value="Submit" name="Submit"></p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</form> - - -<script type="text/javascript"> - -</script> - - -</body> - -</html> diff --git a/external/privoxy/templates/edit-actions-for-url-filter b/external/privoxy/templates/edit-actions-for-url-filter deleted file mode 100644 index d4dad90..0000000 --- a/external/privoxy/templates/edit-actions-for-url-filter +++ /dev/null @@ -1,40 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-for-url-filter,v $ -# -# Purpose : Template that is included from most of Privoxy's CGI pages -# to show the user how to get help or report problems. -# -# -# Copyright : Written by and Copyright (C) 2002-2007 members of -# the SourceForge Privoxy team. http://www.privoxy.org/ -# -# This template is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# Revisions : -# $Log: edit-actions-for-url-filter,v $ -# Revision 1.8 2007/03/29 11:40:34 fabiankeil -# Divide @filter-params@ into @client-header-filter-params@ -# @content-filter-params@ and @server-header-filter-params@. -# -# Revision 1.7 2007/03/20 15:40:00 fabiankeil -# Adjust to new world order with dedicated header-filter actions. -# -# -############################################################################## - -<tr class="bg1" align="left" valign="top"> - <td class="en1" align="center" valign="middle"><input type="radio" name="filter_r@index@" value="Y" @this-filter-y@></td> - <td class="dis1" align="center" valign="middle"><input type="radio" name="filter_r@index@" value="N" @this-filter-n@></td> - <td class="noc1" align="center" valign="middle"><input type="radio" name="filter_r@index@" value="X" @this-filter-x@></td> - <td class="action"> - <input type="hidden" name="filter_t@index@" value="@abbr-filter-type@"> - <input type="hidden" name="filter_n@index@" value="@name@"> - <a href="@user-manual@@actions-help-prefix@@anchor@">@filter-type@</a> @name@ - </td> - <td>@description@</td> -</tr> diff --git a/external/privoxy/templates/edit-actions-list b/external/privoxy/templates/edit-actions-list deleted file mode 100644 index 85ec9b5..0000000 --- a/external/privoxy/templates/edit-actions-list +++ /dev/null @@ -1,412 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-list,v $ -# -# Purpose : Template used to edit the actions file. -# -# -# Copyright : Written by and Copyright (C) 2001-2007 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-list,v $ -# Revision 1.34 2007/05/21 10:54:46 fabiankeil -# - Use strlcpy() instead of strcpy(). -# - Stop treating actions files special. Expect a complete file name -# (with or without path) like it's done for the rest of the files. -# Closes FR#588084. -# - Don't rerun sed() in cgi_show_request(). -# -# Revision 1.33 2007/04/08 13:21:06 fabiankeil -# Reference action files in CGI URLs by id instead -# of using the first part of the file name. -# Fixes BR 1694250 and BR 1590556. -# -# Revision 1.32 2007/01/23 16:03:16 fabiankeil -# - Add favicon links. -# - Remove useless W3C validator links. -# -# Revision 1.31 2006/09/10 14:39:24 hal9 -# Fix typo + minor change. -# -# Revision 1.30 2006/09/09 01:12:15 hal9 -# Soften actions files update interval. -# -# Revision 1.29 2006/07/18 14:49:13 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.26.2.4 2003/12/17 16:35:17 oes -# Work around new & silly MSIE behaviour where the request resulting from -# changing window.location.href doesn't reveal the referrer anymore -# -# Revision 1.26.2.3 2002/09/25 15:34:09 oes -# - Work around JS problem in NS 2.0 (no joke) -# - Make JS string edit popup remove the pattern -# if edited to empty; make JS add popup do nothing -# if pattern empty. -# -# Revision 1.26.2.2 2002/08/23 02:22:53 hal9 -# Fix a perl brain fart with <li> in comments. -# -# Revision 1.26 2002/05/23 23:37:25 oes -# Nit -# -# Revision 1.25 2002/05/21 21:02:52 oes -# Added more help links -# -# Revision 1.24 2002/05/21 19:11:40 oes -# - Added client-side JavaScript versions of edit and add URL forms -# - Moved jump targets to before container table cell -# - Let earu determine the jump target when removing URLs via JS -# - Fixed broken help link -# -# Revision 1.23 2002/05/12 15:53:10 jongfoster -# Restoring CVS log information accidentally removed in -# my previous commit. -# -# Revision 1.22 2002/05/12 15:45:33 jongfoster -# Applying [Patch 552094] New templates for edit-actions-list -# This cleans up the templates by: -# - Removing the (confusing) alternating color scheme. -# - Making everything left-justified. -# -# Revision 1.21 2002/05/03 22:58:15 jongfoster -# Fixing link target in all URLs section -# -# Revision 1.20 2002/04/26 12:57:18 oes -# - Central "button" link style in cgi-style.css -# - Help links now dynamic -# -# Revision 1.19 2002/04/24 02:19:16 oes -# - Show name of actions file being edited -# - Show context sensitive help -# - Add buttons for easy changing of defaults -# - Cosmetics and clarifications -# -# Revision 1.18 2002/04/18 19:21:09 jongfoster -# Added code to detect "conventional" action files, that start -# with a set of actions for all URLs (the pattern "/"). -# These are special-cased in the "edit-actions-list" CGI, so -# that a special UI can be written for them. -# -# Revision 1.17 2002/04/10 13:32:53 oes -# Made templates modular -# -# Revision 1.16 2002/04/08 17:08:14 oes -# Cosmetic: make status in title lowercase -# -# Revision 1.15 2002/04/05 16:01:32 oes -# Correct HTML, external Stylesheets, eye candy, some fixes -# -# Revision 1.14 2002/03/26 22:29:56 swa -# we have a new homepage! -# -# Revision 1.13 2002/03/24 15:23:33 jongfoster -# Name changes -# -# Revision 1.12 2002/03/24 11:01:06 swa -# name change -# -# Revision 1.11 2002/03/23 16:18:15 swa -# renamed every reference to the old name with foobar. -# fixed "application foobar application" tag, fixed -# "the foobar" with "foobar". left junkbuster in cvs -# comments and remarks to history untouched. should -# make final rename easier. -# -# Revision 1.10 2002/03/16 15:22:19 jongfoster -# Moving 'alpha' warning to the end of the page -# -# Revision 1.9 2002/03/05 00:24:51 jongfoster -# Patch to always edit the current actions file. -# -# Revision 1.8 2002/03/03 10:29:12 swa -# point users to the right feedback forms, -# not necessarily the developer list. -# -# Revision 1.7 2002/01/23 00:26:45 jongfoster -# Reducing length of URLs -# Where encoded and unencoded versions of a string existed, removing -# the unencoded one. -# -# Revision 1.6 2002/01/17 21:33:00 jongfoster -# Replacing all references to the URL of the config interface -# with @default-cgi@ -# -# Revision 1.5 2002/01/17 21:21:05 jongfoster -# DOS->Unix line endings -# -# Revision 1.4 2001/11/13 00:58:18 jongfoster -# New version of actions file editor templates -# -# -############################################################################## -# -# Browser support for the CSS on this page: -# MS Internet Explorer 5.5 - Yes - everything works. -# Netscape 6.2 - Yes - everything works. -# Netscape 4.75 - No - CSS buttons look really bad, but they are -# usable. Everything else works. -# Opera 5.12 - Yes - everything works. -# MS Internet Explorer 4+ - Untested -# MS IE 3.x, NS3.x - Untested (Don't support CSS, so everything -# should work, but will look ugly). -# Mozilla >=0.6 - Yes - everything works. -# -# All browsers should work, you just might not get the pretty CSS buttons. -# -# If your favorite browser isn't listed/tested, please test and add it. -# -# -############################################################################# -# -# Standard support: -# -# This file currently produces valid HTML 4.01 Strict. -# -# If you change it, please save the generated page from your web browser -# and then upload it to http://validator.w3.org/ for checking. -# -############################################################################# -# -# Available variables include: -# -# filename -# ver -# -# -############################################################################# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> - - <title>Privoxy: Edit actions file @actions-file@</title> - - <style type="text/css"> - -table.framed { - border: solid black 1px; - margin: 10px 0px; -} -tr.actions { - background-color: #eeffee; -} -tr.url { - background-color: #ddddff; -} -tr.adv { - background-color: #FFFFD0; -} -td.header { - font-weight: bold; - font-size: 110%; - padding: 10px 15px 2px 15px; -} -td.url { - font-weight: bold; -} -td.action { - font-weight: bold; - font-style: italic; - padding: 2px 30px; -} -td.nbr, td.buttons { - white-space: nowrap; -} -td.indentbuttons { - padding: 2px 30px; -} -</style> - -<script type="text/javascript"> - -</script> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="info"> - <h2>What is all this?</h2> - <p> - If you haven't already done so, it is <b>strongly recommended</b> that you at - least skim <a href="@user-manual@@actions-help-prefix@ACTIONS-FILE">the - chapter on actions files</a> in the <a href="@user-manual@">User Manual</a> - before making any changes. You will also find a comprehensive list of - all available actions there, as well how the settings on this page - work. - </p> -  - <p> - Please note that <b>the first section has special importance</b>. It sets the default actions for - all URLs. The resulting actions for a particular URL may differ from these defaults if that - URL matches again further down, but this section is largely responsible for your browsing - experience. Edit manually with great care, or choose from the predefined sets of actions. - </p> -  -  - <p> - This is the default action file. Updates for it are available from - <a href="http://www.privoxy.org/">Privoxy.org</a> from time to time. - It is therefore <b>not recommended</b> that you add your private - rules here, since they will be lost if you install an update in the future. - Put your rules in a separate actions file, like <tt>user.action</tt> instead. - </p> -  - </td> - </tr> - - <tr> - <td class="box"> - <div class="buttons"> - <h2>Editing Actions File @actions-file@</h2> -  - <p><a class="cmd" href="edit-actions-section-add?f=@f@&v=@v@&s=0">Insert new section at top</a></p> -  - </div> - </td> - </tr> - -  - <tr> - <td class="container"><a name="l@all-urls-s@"></a> - <table border="0" width="100%" cellspacing="2" cellpadding="3" class="framed"> - <tr class="actions"><td class="header"><a href="@user-manual@@actions-help-prefix@ACTIONS">Actions</a>:</td></tr> - <tr class="actions"> - <td class="indentbuttons"> - <a href="eafu?f=@f@&v=@v@&s=@all-urls-s@">Edit</a> - @all-urls-buttons@ - </td> - </tr> - <tr class="actions"><td class="action">@all-urls-actions@</td></tr> - <tr class="url"><td class="header"><a href="@user-manual@@actions-help-prefix@AF-PATTERNS">URL patterns</a>:</td></tr> - <tr class="url"><td class="indentbuttons">/   <i>(Matches all requests)</a></td></tr> - <tr class="adv"><td class="header">Advanced:</td></tr> - <tr class="adv"> - <td class="indentbuttons"> - <a href="easa?f=@f@&v=@v@&s=@all-urls-s@#l@all-urls-s-next@">Insert new section below</a> - </td> - </tr> - </table> - </td> - </tr> -  - -@sections@ - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> -</body> - -</html> diff --git a/external/privoxy/templates/edit-actions-list-button b/external/privoxy/templates/edit-actions-list-button deleted file mode 100644 index fd0e8b9..0000000 --- a/external/privoxy/templates/edit-actions-list-button +++ /dev/null @@ -1,49 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-list-button,v $ -# -# Purpose : Template which forms part of edit-actions-list -# -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-list-button,v $ -# Revision 1.3 2002/05/12 15:53:10 jongfoster -# Restoring CVS log information accidentally removed in -# my previous commit. -# -# Revision 1.2 2002/05/12 15:45:33 jongfoster -# Applying [Patch 552094] New templates for edit-actions-list -# This cleans up the templates by: -# - Removing the (confusing) alternating color scheme. -# - Making everything left-justified. -# -# Revision 1.1 2002/05/03 23:00:38 jongfoster -# Support for templates for "standard actions" buttons. -# See bug #549871 -# -############################################################################# -   <a href="eas?f=@f@&v=@v@&s=@all-urls-s@&p=@button-name@#l@all-urls-s@">Set to @button-name@</a> diff --git a/external/privoxy/templates/edit-actions-list-section b/external/privoxy/templates/edit-actions-list-section deleted file mode 100644 index c8578ad..0000000 --- a/external/privoxy/templates/edit-actions-list-section +++ /dev/null @@ -1,125 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-list-section,v $ -# -# Purpose : Template which forms part of edit-actions-list -# -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-list-section,v $ -# Revision 1.16 2006/07/18 14:49:13 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.15.2.1 2003/12/17 16:35:17 oes -# Work around new & silly MSIE behaviour where the request resulting from -# changing window.location.href doesn't reveal the referrer anymore -# -# Revision 1.15 2002/05/21 21:02:52 oes -# Added more help links -# -# Revision 1.14 2002/05/21 19:12:43 oes -# - Added client-side JavaScript versions of edit and add URL forms -# - Moved jump targets to before container table cell -# -# Revision 1.13 2002/05/12 15:45:33 jongfoster -# Applying [Patch 552094] New templates for edit-actions-list -# This cleans up the templates by: -# - Removing the (confusing) alternating color scheme. -# - Making everything left-justified. -# -# Revision 1.12 2002/04/26 12:58:11 oes -# Central "button" link style in cgi-style.css -# -# Revision 1.11 2002/04/24 02:14:03 oes -# Changed shortcuts, Cosmetics -# -# Revision 1.10 2002/04/17 21:27:26 jongfoster -# Adding #linenumber to the URLs which affect blocks, to make -# editing in long files easier. -# -# Revision 1.9 2002/04/17 15:51:47 oes -# Args! Restoring CVS history -# -# Revision 1.8 2002/04/17 15:04:16 oes -# Adapted to style change -# -# Revision 1.7 2002/03/26 22:29:56 swa -# we have a new homepage! -# -# Revision 1.6 2002/03/24 11:01:06 swa -# name change -# -# Revision 1.5 2002/01/23 00:26:45 jongfoster -# Reducing length of URLs -# Where encoded and unencoded versions of a string existed, removing -# the unencoded one. -# -# Revision 1.4 2002/01/17 21:33:00 jongfoster -# Replacing all references to the URL of the config interface -# with @default-cgi@ -# -# Revision 1.3 2001/11/13 00:58:18 jongfoster -# New version of actions file editor templates -# -# -############################################################################# -# -# Available variables include: -# -# filename -# ver -# sectionid -# urls -# -############################################################################# -# -# ** Important note: ** -# -# It is important to keep this file small. That's why all the -# identifiers in the HTML are short and cryptic. Currently, the main -# edit-actions page is ~300k. Before it was optimized, it was ~550k. -# -############################################################################# - -<tr><td class="container"><a name="l@s@"></a> -<table border="0" width="100%" cellspacing="2" cellpadding="3" class="framed"> -<tr class="actions"><td class="header"><a href="@user-manual@@actions-help-prefix@ACTIONS">Actions</a>:</td></tr> -<tr class="actions"><td class="indentbuttons"><a href="eafu?f=@f@&v=@v@&s=@s@">Edit</a></td></tr> -<tr class="actions"><td class="action">@actions@</td></tr> -<tr class="url"><td class="header"><a href="@user-manual@@actions-help-prefix@AF-PATTERNS">URL patterns</a>:</td></tr> -<tr class="url"><td class="indentbuttons"><a href="eaa?f=@f@&v=@v@&s=@s@" onclick="return a_p(this,@s@);">Add</a></td></tr> -@urls@ -<tr class="adv"><td class="header">Advanced:</td></tr> -<tr class="adv"><td class="indentbuttons"> -@if-s-prev-exists-start@<a href="eass?f=@f@&v=@v@&s1=@s-prev@&s2=@s@#l@s-prev@">Move section up</a>   @if-s-prev-exists-end@ -@if-s-next-exists-start@<a href="eass?f=@f@&v=@v@&s1=@s@&s2=@s-next@#l@s@">Move section down</a>   @if-s-next-exists-end@ -<a href="easa?f=@f@&v=@v@&s=@s@#l@s-next@">Insert new section below</a> -@if-empty-section-start@   <a href="easr?f=@f@&v=@v@&s=@s@#l@s@">Delete whole section</a>@if-empty-section-end@ -</td></tr> -</table> -</td></tr> diff --git a/external/privoxy/templates/edit-actions-list-url b/external/privoxy/templates/edit-actions-list-url deleted file mode 100644 index 08c1ea4..0000000 --- a/external/privoxy/templates/edit-actions-list-url +++ /dev/null @@ -1,95 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-list-url,v $ -# -# Purpose : Template which forms part of edit-actions-list -# -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-list-url,v $ -# Revision 1.11 2006/07/18 14:49:14 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.10.2.1 2003/12/17 16:35:17 oes -# Work around new & silly MSIE behaviour where the request resulting from -# changing window.location.href doesn't reveal the referrer anymore -# -# Revision 1.10 2002/05/21 19:13:14 oes -# Added client-side JavaScript versions of edit and add URL forms -# -# Revision 1.9 2002/05/12 15:45:33 jongfoster -# Applying [Patch 552094] New templates for edit-actions-list -# This cleans up the templates by: -# - Removing the (confusing) alternating color scheme. -# - Making everything left-justified. -# -# Revision 1.8 2002/04/26 12:58:11 oes -# Central "button" link style in cgi-style.css -# -# Revision 1.7 2002/03/26 22:29:56 swa -# we have a new homepage! -# -# Revision 1.6 2002/03/24 11:01:06 swa -# name change -# -# Revision 1.5 2002/01/23 00:26:45 jongfoster -# Reducing length of URLs -# Where encoded and unencoded versions of a string existed, removing -# the unencoded one. -# -# Revision 1.4 2002/01/17 21:33:00 jongfoster -# Replacing all references to the URL of the config interface -# with @default-cgi@ -# -# Revision 1.3 2001/11/13 00:58:18 jongfoster -# New version of actions file editor templates -# -# -############################################################################# -# -# Available variables include: -# -# filename -# ver -# sectionid -# urls -# -############################################################################# -# -# ** Important note: ** -# -# It is *extremely* important to keep this file small. That's why all the -# identifiers in the HTML are short and cryptic. Currently, the main -# edit-actions page is ~300k. Before it was optimized, it was ~550k. -# -############################################################################# -<tr class="url" valign="top"> -<td class="indentbuttons"><a name="l@p@" -href="ear?f=@f@&v=@v@&p=@p@" onclick="return rm_p(this, @p@,'@url@');">Remove</a>   <a -href="eau?f=@f@&v=@v@&p=@p@" onclick="return e_p(this, @p@,'@url@');">Edit</a>  @url-html@</td> -</tr> diff --git a/external/privoxy/templates/edit-actions-remove-url-form b/external/privoxy/templates/edit-actions-remove-url-form deleted file mode 100644 index 17b9b22..0000000 --- a/external/privoxy/templates/edit-actions-remove-url-form +++ /dev/null @@ -1,196 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-remove-url-form,v $ -# -# Purpose : Template used to confirm removal of a particular URL -# pattern from an actions file. Only used on browsers that -# don't support JavaScript. -# -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-remove-url-form,v $ -# Revision 1.17 2007/01/23 16:03:16 fabiankeil -# - Add favicon links. -# - Remove useless W3C validator links. -# -# Revision 1.16 2006/07/18 14:49:14 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.14.2.2 2002/08/23 02:22:53 hal9 -# Fix a perl brain fart with <li> in comments. -# -# Revision 1.14 2002/05/21 19:13:49 oes -# Added button style and jumptargets to "add" and "cancel" links -# -# Revision 1.13 2002/04/10 13:32:53 oes -# Made templates modular -# -# Revision 1.12 2002/04/08 17:08:14 oes -# Cosmetic: make status in title lowercase -# -# Revision 1.11 2002/04/05 16:01:30 oes -# Correct HTML, external Stylesheets, eye candy, some fixes -# -# Revision 1.10 2002/03/26 22:29:56 swa -# we have a new homepage! -# -# Revision 1.9 2002/03/24 15:23:33 jongfoster -# Name changes -# -# Revision 1.8 2002/03/24 11:01:06 swa -# name change -# -# Revision 1.7 2002/03/23 16:18:15 swa -# renamed every reference to the old name with foobar. -# fixed "application foobar application" tag, fixed -# "the foobar" with "foobar". left junkbuster in cvs -# comments and remarks to history untouched. should -# make final rename easier. -# -# Revision 1.6 2002/03/16 15:22:19 jongfoster -# Moving 'alpha' warning to the end of the page -# -# Revision 1.5 2002/03/03 10:29:12 swa -# point users to the right feedback forms, -# not necessarily the developer list. -# -# Revision 1.4 2002/01/23 00:26:45 jongfoster -# Reducing length of URLs -# Where encoded and unencoded versions of a string existed, removing -# the unencoded one. -# -# Revision 1.3 2002/01/17 21:33:00 jongfoster -# Replacing all references to the URL of the config interface -# with @default-cgi@ -# -# Revision 1.2 2002/01/17 21:21:05 jongfoster -# DOS->Unix line endings -# -# Revision 1.1 2001/11/13 00:58:18 jongfoster -# New version of actions file editor templates -# -# -############################################################################## -# -# Standard support: -# -# This file currently produces valid HTML 4.01 Strict. -# -# If you change it, please save the generated page from your web browser -# and then upload it to http://validator.w3.org/ for checking. -# -############################################################################# -# -# Available variables include: -# -# filename -# ver -# section -# pattern -# oldval -# jumptarget - append to eal URL to jump to relevant section -# -############################################################################# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> - - <title>Privoxy@@my-hostname@: Remove URL Pattern</title> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Remove URL Pattern</h2> - <p>Are you sure you want to delete this URL pattern? The pattern is:</p> - <p class="important">@u@</p> - <p> - <a class="cmd" href="edit-actions-remove-url?f=@f@&v=@v@&p=@p@">OK</a> -   - <a class="cmd" href="edit-actions-list?f=@f@@jumptarget@">Cancel</a> - </p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> -</body> - -</html> diff --git a/external/privoxy/templates/edit-actions-url-form b/external/privoxy/templates/edit-actions-url-form deleted file mode 100644 index 0b91035..0000000 --- a/external/privoxy/templates/edit-actions-url-form +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/edit-actions-url-form,v $ -# -# Purpose : Template used to edit a URL pattern in an actions file. -# -# -# Copyright : Written by and Copyright (C) 2001 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# Original Author: Copyright (C) 2001 Jonathan Foster -# http://www.jon-foster.co.uk/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: edit-actions-url-form,v $ -# Revision 1.18 2007/12/08 14:38:55 fabiankeil -# - Use the shiny new CSS "pattern" class. -# - s@URL Pattern@URL or TAG Pattern@ -# - Use the standard favicon as this ain't no error page. -# -# Revision 1.17 2007/01/23 16:03:16 fabiankeil -# - Add favicon links. -# - Remove useless W3C validator links. -# -# Revision 1.16 2006/07/18 14:49:14 david__schmidt -# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) -# with what was really the latest development (the v_3_0_branch branch) -# -# Revision 1.14.2.2 2002/08/23 02:22:53 hal9 -# Fix a perl brain fart with <li> in comments. -# -# Revision 1.14 2002/05/21 19:14:10 oes -# Added button style and jumptarget "cancel" link -# -# Revision 1.13 2002/04/10 13:32:53 oes -# Made templates modular -# -# Revision 1.12 2002/04/08 17:08:14 oes -# Cosmetic: make status in title lowercase -# -# Revision 1.11 2002/04/05 16:01:32 oes -# Correct HTML, external Stylesheets, eye candy, some fixes -# -# Revision 1.10 2002/03/26 22:29:56 swa -# we have a new homepage! -# -# Revision 1.9 2002/03/24 15:23:33 jongfoster -# Name changes -# -# Revision 1.8 2002/03/24 11:01:06 swa -# name change -# -# Revision 1.7 2002/03/23 16:18:15 swa -# renamed every reference to the old name with foobar. -# fixed "application foobar application" tag, fixed -# "the foobar" with "foobar". left junkbuster in cvs -# comments and remarks to history untouched. should -# make final rename easier. -# -# Revision 1.6 2002/03/16 15:22:19 jongfoster -# Moving 'alpha' warning to the end of the page -# -# Revision 1.5 2002/03/03 10:29:13 swa -# point users to the right feedback forms, -# not necessarily the developer list. -# -# Revision 1.4 2002/01/23 00:26:45 jongfoster -# Reducing length of URLs -# Where encoded and unencoded versions of a string existed, removing -# the unencoded one. -# -# Revision 1.3 2002/01/17 21:33:00 jongfoster -# Replacing all references to the URL of the config interface -# with @default-cgi@ -# -# Revision 1.2 2002/01/17 21:21:05 jongfoster -# DOS->Unix line endings -# -# Revision 1.1 2001/11/13 00:58:18 jongfoster -# New version of actions file editor templates -# -# -############################################################################## -# -# Standard support: -# -# This file currently produces valid HTML 4.01 Strict. -# -# If you change it, please save the generated page from your web browser -# and then upload it to http://validator.w3.org/ for checking. -# -############################################################################# -# -# Available variables include: -# -# f - filename -# v - version -# s - section -# p - pattern -# u - old value of URL -# jumptarget - append to eal URL to jump to relevant section -# -############################################################################# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico"> - - <title>Privoxy@@my-hostname@: Edit URL Pattern</title> - - <script type="text/javascript"> - - </script> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Edit URL or TAG Pattern</h2> - <form method="GET" action="edit-actions-url" - onSubmit="return validate(u.value);"> - <p> - <input type="hidden" name="f" value="@f@"> - <input type="hidden" name="v" value="@v@"> - <input type="hidden" name="p" value="@p@"> - <input type="text" name="u" value="@u@" size="78" class="pattern"><br> - <input type="submit" value="Submit">   - <input type="reset" value="Reset">   - <a class="cmd" href="edit-actions-list?f=@f@@jumptarget@">Cancel</a> - </p> - </form> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> -</body> - -</html> diff --git a/external/privoxy/templates/forwarding-failed b/external/privoxy/templates/forwarding-failed deleted file mode 100644 index fca5c8c..0000000 --- a/external/privoxy/templates/forwarding-failed +++ /dev/null @@ -1,167 +0,0 @@ -########################################################## -# -# Forwarding-failed template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written in plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# gateway -# The IP or hostname of the forwarding server -# hostport: -# The host and port part of the request that lead to this problem -# path: -# The path part of the request that lead to this problem -# error-message: -# The failure reason. -# forwarding-type: -# The type of the forwarding request: "socks4-", "socks4a-" -# or (in the future) "" for direct connections to the forwarder. -# -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>503 - Forwarding failure (Privoxy@@my-hostname@)</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> - <style type="text/css"> -#include cgi-style.css - </style> -</head> - -<body> - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="status"> - 503 - </td> - <td class="title" style="width: 100%"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning" colspan="2"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning" colspan=2> - <h2>Forwarding failure</h2> - <p>Privoxy was unable to <b>@forwarding-type@forward</b> your request - <a title="Repeat the request" - href="@protocol@@hostport@@path@"><b>@protocol@@hostport@@path@</b></a> - through <b>@gateway@</b>: - <strong>@error-message@</strong></p> - </p> - <p>Just <a title="Repeat the request" href="@protocol@@hostport@@path@">try again</a> to - see if this is a temporary problem, or check your <a title="Privoxy's show-status page" - href="@default-cgi@show-status">forwarding settings</a> - and make sure that all forwarding servers are working correctly and - listening where they are supposed to be listening. - </p> - </td> - </tr> - - <tr> - <td class="box" colspan="2"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info" colspan="2"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info" colspan="2"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/mod-local-help b/external/privoxy/templates/mod-local-help deleted file mode 100644 index 21d6596..0000000 --- a/external/privoxy/templates/mod-local-help +++ /dev/null @@ -1,12 +0,0 @@ - <h2>Local Privoxy support:</h2> - - - <p>You can consult the <a href="@proxy-info-url@">online documentation</a> for more information about this Privoxy installation.</p> - - - - <p>Address e-mail questions about this service to - <a href="mailto:@admin-address@"><code>@admin-address@</code></a>, - who will be glad to help you. - </p> - diff --git a/external/privoxy/templates/mod-support-and-service b/external/privoxy/templates/mod-support-and-service deleted file mode 100644 index 9868761..0000000 --- a/external/privoxy/templates/mod-support-and-service +++ /dev/null @@ -1,61 +0,0 @@ -############################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/mod-support-and-service,v $ -# -# Purpose : Template that is included from most of Privoxy's CGI pages -# to show the user how to get help or report problems. -# -# -# Copyright : Written by and Copyright (C) 2002-2007 members of -# the SourceForge Privoxy team. http://www.privoxy.org/ -# -# This template is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# Revisions : -# $Log: mod-support-and-service,v $ -# Revision 1.11 2008/01/02 18:06:58 fabiankeil -# Instead of linking to the "Contacting the developers ..." section -# in the FAQ, use the one from the User Manual. The latter can be -# delivered by Privoxy and thus possibly loads faster. -# -# Revision 1.10 2007/03/17 11:31:36 fabiankeil -# - Add revision log and copyright header. -# - Reword instructions and link to the FAQ -# in an attempt to reduce the number of -# incomplete reports. -# -############################################################################## - <h2>Support and Service:</h2> - <p> - The Privoxy Team values your feedback. To provide you with the best support, - we ask that you: - </p> - <ul> - <li> - use the <a href="http://sourceforge.net/tracker/?group_id=11118&atid=211118">Support Tracker</a> - if you need help. - </li> - <li> - submit ads and configuration related problems with the actions files through the - <a href="http://sourceforge.net/tracker/?group_id=11118&atid=460288">Actionsfile Feedback Tracker</a>. - </li> - <li> - submit bugs only through the - <a href="http://sourceforge.net/tracker/?group_id=11118&atid=111118">Bug Tracker</a>. - Please make sure that the bug has not been submitted yet. - </li> - <li> - submit feature requests only through the - <a href="http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=bro…">Feature - Request Tracker</a>. - </li> - <li> - read the <a title="Contacting the developers, Bug Reporting and Feature Requests" - href="@user-manual@contact.html">instructions in the User Manual</a> - to make sure your request contains all the information we need. - </li> - </ul> diff --git a/external/privoxy/templates/mod-title b/external/privoxy/templates/mod-title deleted file mode 100644 index de73eba..0000000 --- a/external/privoxy/templates/mod-title +++ /dev/null @@ -1,4 +0,0 @@ - <h1> - This is <a href="@homepage@">Privoxy</a> @version@ on @my-hostname@ (@my-ip-address@), port @my-port@, - @if-enabled-display-then@enabled@else-not-enabled-display@disabled@endif-enabled-display@ - </h1> diff --git a/external/privoxy/templates/mod-unstable-warning b/external/privoxy/templates/mod-unstable-warning deleted file mode 100644 index dd77c29..0000000 --- a/external/privoxy/templates/mod-unstable-warning +++ /dev/null @@ -1,7 +0,0 @@ - <h2>Warning:</h2> - <p> - <strong>This Privoxy version is based on <em class="warning">@code-status@</em> code and - not intended for production systems! - <br>Use at your own risk. See the <a title="GNU General Public License version 2" - href="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html">license</a> for details.</strong> - </p> diff --git a/external/privoxy/templates/no-such-domain b/external/privoxy/templates/no-such-domain deleted file mode 100644 index 08cf5da..0000000 --- a/external/privoxy/templates/no-such-domain +++ /dev/null @@ -1,158 +0,0 @@ -########################################################## -# -# No-Such-Domain Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the proxy's administrator, as configured -# in the 'config' file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# host: -# The host part of the request that lead to this problem -# hostport: -# The host and port part of the request that lead to this problem -# path: -# The path part of the request that lead to this problem -# proxy-info-url: -# The URL to local online Privoxy documentation, if define in the -# 'config' file -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>404 - No such Domain (Privoxy@@my-hostname@)</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> - <style type="text/css"> -#include cgi-style.css - </style> -</head> - -<body> - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="status"> - 404 - </td> - <td class="title" style="width: 100%"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning" colspan="2"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning" colspan="2"> - <h2>No such domain</h2> - <p>Your request for <a href="@protocol@@hostport@@path@"><b>@protocol@@hostport@@path@</b></a> - could not be fulfilled, because the domain name <b>@host@</b> could not be resolved. - </p> - <p>This is often a temporary failure, so you might just - <a href="@protocol@@hostport@@path@">try again</a>. - </p> - </td> - </tr> - - <tr> - <td class="box" colspan="2"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info" colspan="2"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info" colspan="2"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/show-request b/external/privoxy/templates/show-request deleted file mode 100644 index 30a2529..0000000 --- a/external/privoxy/templates/show-request +++ /dev/null @@ -1,154 +0,0 @@ -########################################################## -# -# Show-Request-CGI Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# client-request: -# The request and headers that the client sent. -# processed-request: -# What we would have rewritten this request to, if this had not -# been intercepted. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy@@my-hostname@</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Show-Request</h2> - <p> - Here you see the original headers that your client sent when requesting this page, along with - the headers that Privoxy would have sent to the remote server if this request hadn't been - intercepted. - </p> - - <h3>Original Client Request:</h3> - <pre>@client-request@</pre> - - <h3>Processed Request:</h3> - <pre>@processed-request@</pre> - - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/show-status b/external/privoxy/templates/show-status deleted file mode 100644 index f71e2de..0000000 --- a/external/privoxy/templates/show-status +++ /dev/null @@ -1,343 +0,0 @@ -########################################################## -# -# Show-Status-CGI Output template for Privoxy. -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach Privoxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the Privoxy administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of Privoxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The Privoxy version number -# code-status: -# The Privoxy development status: "alpha", "beta", or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# redirect-url: -# The URL to a script that will redirect to the Privoxy -# documentation for a given item -# invocation: -# The command line with which Privoxy was invoked -# options: -# The options read from the configfile, linked to their -# explanations, plus warnings if parsing acl or forward -# statements produced errors. -# sourceversions: -# A HTML-formatted list of the individual source file cvs versions -# defines: -# A HTML-formatted list of all conditional #defines used when -# Privoxy was compiled -# -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# This is an alpha or beta Privoxy release -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for Privoxy's online documentation has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# statistics: -# Privoxy was compiled with statistics support -# have-stats: -# There have been previous requests and statistics have -# been collected. In this case, the following symbols -# are available: -# requests-received: -# The number of requests received so far -# requests-blocked: -# The number of request blocked so far -# percent-blocked: -# The percentage of blocked requests -# have-no-stats: -# There haven't any statistics been collected yet -# pcrs-support: -# Privoxy was compiled with pcrs support -# trust-support: -# Privoxy was compiled with trust support -# actions-filenames: -# The path to the actions files. -# re-filter-filenames: -# The path to the re_filter files. Only available if -# pcrs-support is set -# trust-filename: -# The path to the trust file. Only available if -# trust-support is set -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy@@my-hostname@: Proxy Status</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> -</head> - -<body> - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>The following files are in use:</h2> - <table summary="Action, filter and trust files in use." class="transparent"> - <tr> - <th colspan="2"><a href="@user-manual@@actions-help-prefix@ACTIONS-FILE">Actions Files:</a></th> - </tr> - @actions-filenames@ - <tr> - <th colspan="2"><a href="@user-manual@filter-file.html">Filter Files:</a></th> - </tr> - @re-filter-filenames@ - - <tr> - <th colspan="2"><a href="@user-manual@config.html#TRUSTFILE">Trust File:</a></th> - </tr> - <tr> - <td> - @trust-filename@ - </td> - <td class="buttons"> -  - <a href="show-status?file=trust">View</a> -  - </td> - </tr> - - </table> - - <p> - The CGI editor is currently disabled, thus no edit buttons are shown.<br> - Please have a look at the - <a href="@user-manual@config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions documentation</a> - to learn how to enable it and what the risks are. - </p> - - </td> - </tr> - - <tr> - <td class="box"> - <h2>Privoxy was <a href="@user-manual@startup.html#CMDOPTIONS">invoked</a> as follows:</h2> - <p>@invocation@</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>The following options were given in the <a href="@user-manual@config.html">config file</a>:</h2> - <p>@options@</p> - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Blocking Statistics:</h2> - <p> -  - @requests-blocked@ out of @requests-received@ requests have been blocked, - which equals a block rate of @percent-blocked@%. - - - There haven't been any requests so far. - - </p> - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Conditional #defines:</h2> - <table summary="The state of some ./configure options and what they do." border="1" style="margin-left: 10px"> - <tr> - <th>#define</th> <th>Enabled?</th> <th>Effects when enabled</th> - </tr> - <tr> - <td><code>FEATURE_ACL</code></td> - <td>@if-FEATURE_ACL-then@ Yes @else-not-FEATURE_ACL@ No @endif-FEATURE_ACL@</td> - <td>Allows the use of an ACL to control access to Privoxy by IP address.</td> - </tr> - <tr> - <td><code>FEATURE_CGI_EDIT_ACTIONS</code></td> - <td>@if-FEATURE_CGI_EDIT_ACTIONS-then@ Yes @else-not-FEATURE_CGI_EDIT_ACTIONS@ No @endif-FEATURE_CGI_EDIT_ACTIONS@</td> - <td>Allows the use of the @if-FEATURE_CGI_EDIT_ACTIONS-then@<a - href="@default-cgi@edit-actions">@else-not-FEATURE_CGI_EDIT_ACTIONS@ - @endif-FEATURE_CGI_EDIT_ACTIONS@web-based actions file - editor@if-FEATURE_CGI_EDIT_ACTIONS-then@</a>@else-not-FEATURE_CGI_EDIT_ACTIONS@@endif-FEATURE_CGI_EDIT_ACTIONS@.</td> - </tr> - <tr> - <td><code>FEATURE_CONNECTION_KEEP_ALIVE</code></td> - <td>@if-FEATURE_CONNECTION_KEEP_ALIVE-then@ Yes @else-not-FEATURE_CONNECTION_KEEP_ALIVE@ No @endif-FEATURE_CONNECTION_KEEP_ALIVE@</td> - <td> - Allows to reuse outgoing connections if the server supports it. - Requires the keep-alive-timeout config directive to be set. - </td> - </tr> - <tr> - <td><code>FEATURE_FAST_REDIRECTS</code></td> - <td>@if-FEATURE_FAST_REDIRECTS-then@ Yes @else-not-FEATURE_FAST_REDIRECTS@ No @endif-FEATURE_FAST_REDIRECTS@</td> - <td>Allows the +fast-redirects action, to bypass redirect and logging scripts.</td> - </tr> - <tr> - <td><code>FEATURE_FORCE_LOAD</code></td> - <td>@if-FEATURE_FORCE_LOAD-then@ Yes @else-not-FEATURE_FORCE_LOAD@ No @endif-FEATURE_FORCE_LOAD@</td> - <td>Allows bypassing all filtering for a single page using the prefix - <q><code>@FORCE_PREFIX@</code></q>.</td> - </tr> - <tr> - <td><code>FEATURE_GRACEFUL_TERMINATION</code></td> - <td>@if-FEATURE_GRACEFUL_TERMINATION-then@ Yes @else-not-FEATURE_GRACEFUL_TERMINATION@ No @endif-FEATURE_GRACEFUL_TERMINATION@</td> - <td>Allows to shutdown Privoxy through the web interface.</td> - </tr> - <tr> - <td><code>FEATURE_IMAGE_BLOCKING</code></td> - <td>@if-FEATURE_IMAGE_BLOCKING-then@ Yes @else-not-FEATURE_IMAGE_BLOCKING@ No @endif-FEATURE_IMAGE_BLOCKING@</td> - <td>Allows the +handle-as-image action, to send <q>blocked</q> images instead of HTML.</td> - </tr> - <tr> - <td><code>FEATURE_IMAGE_DETECT_MSIE</code></td> - <td>@if-FEATURE_IMAGE_DETECT_MSIE-then@ Yes @else-not-FEATURE_IMAGE_DETECT_MSIE@ No @endif-FEATURE_IMAGE_DETECT_MSIE@</td> - <td>Enables automatic detection of image and HTML requests from - Microsoft Internet Explorer users, overriding the setting of - +image in the actions file.</td> - </tr> - <tr> - <td><code>FEATURE_NO_GIFS</code></td> - <td>@if-FEATURE_NO_GIFS-then@ Yes @else-not-FEATURE_NO_GIFS@ No @endif-FEATURE_NO_GIFS@</td> - <td>Use PNG instead of GIF for the built-in images.</td> - </tr> - <tr> - <td><code>FEATURE_PTHREAD</code></td> - <td>@if-FEATURE_PTHREAD-then@ Yes @else-not-FEATURE_PTHREAD@ No @endif-FEATURE_PTHREAD@</td> - <td>Use POSIX threads rather than native threads</td> - </tr> - <tr> - <td><code>FEATURE_STATISTICS</code></td> - <td>@if-FEATURE_STATISTICS-then@ Yes @else-not-FEATURE_STATISTICS@ No @endif-FEATURE_STATISTICS@</td> - <td>Enables the statistics function.</td> - </tr> - <tr> - <td><code>FEATURE_TOGGLE</code></td> - <td>@if-FEATURE_TOGGLE-then@ Yes @else-not-FEATURE_TOGGLE@ No @endif-FEATURE_TOGGLE@</td> - <td>Allow Privoxy to be <q>disabled</q> so it is just a normal non-blocking non-anonymizing proxy.</td> - </tr> - <tr> - <td><code>FEATURE_TRUST</code></td> - <td>@if-FEATURE_TRUST-then@ Yes @else-not-FEATURE_TRUST@ No @endif-FEATURE_TRUST@</td> - <td>Allows the use of trust files.</td> - </tr> - <tr> - <td><code>FEATURE_ZLIB</code></td> - <td>@if-FEATURE_ZLIB-then@ Yes @else-not-FEATURE_ZLIB@ No @endif-FEATURE_ZLIB@</td> - <td>Allows to decompress gzip and zlib compressed documents for filtering. - Requires external zlib library and hasn't been tested on all platforms.</td> - </tr> - <tr> - <td><code>STATIC_PCRE</code></td> - <td>@if-STATIC_PCRE-then@ Yes @else-not-STATIC_PCRE@ No @endif-STATIC_PCRE@</td> - <td>Use the supplied statically-linked PCRE library. This is set automatically - by <code>./configure</code> if you do not have the libpcre installed.</td> - </tr> - <tr> - <td><code>STATIC_PCRS</code></td> - <td>@if-STATIC_PCRS-then@ Yes @else-not-STATIC_PCRS@ No @endif-STATIC_PCRS@</td> - <td>Use the supplied statically-linked PCRS library. This is set automatically - by <code>./configure</code> if you do not have the libpcrs installed.</td> - </tr> - </table> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/show-status-file b/external/privoxy/templates/show-status-file deleted file mode 100644 index 4fa9333..0000000 --- a/external/privoxy/templates/show-status-file +++ /dev/null @@ -1,146 +0,0 @@ -########################################################## -# -# Show-Status-CGI Output template for Privoxy. -# (Variant for the show-file mode) -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# file-description: -# A descriptive name for the file being shown -# contents: -# The contents of the file being shown -# filepath -# The complete filename of the file being shown -# -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# This is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy@@my-hostname@: Contents of @file-description@</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Contents of @file-description@ @filepath@</h2> - <pre>@contents@</pre> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/show-url-info b/external/privoxy/templates/show-url-info deleted file mode 100644 index a5013f5..0000000 --- a/external/privoxy/templates/show-url-info +++ /dev/null @@ -1,340 +0,0 @@ -######################################################################## -# -# File : $Source: /cvsroot/ijbswa/current/templates/show-url-info,v $ -# -# Purpose : Template for Privoxy's show-url-info CGI page. -# -# Copyright : Written by and Copyright (C) 2001-2007 the SourceForge -# Privoxy team. http://www.privoxy.org/ -# -# This program is free software; you can redistribute it -# and/or modify it under the terms of the GNU General -# Public License as published by the Free Software -# Foundation; either version 2 of the License, or (at -# your option) any later version. -# -# This program is distributed in the hope that it will -# be useful, but WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. See the GNU General Public -# License for more details. -# -# The GNU General Public License should be included with -# this file. If not, you can view it at -# http://www.gnu.org/copyleft/gpl.html -# or write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# Revisions : -# $Log: show-url-info,v $ -# Revision 1.29 2009/01/01 17:36:41 ler762 -# remove non-standard <nobr> tags -# -# Revision 1.28 2009/01/01 14:51:21 ler762 -# keep the input field and 'go' button on the same line. -# -# Revision 1.27 2008/05/26 17:30:58 fabiankeil -# Provide an OpenSearch Description to access the -# show-url-info page through "search engine plugins". -# -# Revision 1.26 2008/05/05 10:03:06 fabiankeil -# If the provided URL isn't valid, don't show the -# cgi-editor-is-disabled and filters-might-be-ineffective -# sections. -# -# Revision 1.25 2008/04/26 10:34:18 fabiankeil -# If zlib support is unavailable and there are content filters active -# but the prevent-compression action is disabled, include a warning -# on the show-url-info page that compression might prevent filtering. -# -# Revision 1.24 2008/02/10 17:26:52 fabiankeil -# Reduce superfluous white space by not marking -# up the final results list as paragraph. -# -# Revision 1.23 2008/02/01 06:04:31 fabiankeil -# If edit buttons on the show-url-info CGI page are hidden, explain why. -# -# Revision 1.22 2007/12/08 14:29:06 fabiankeil -# Use CSS to let the URL and pattern input fields scale with -# the browser width and try to prevent vertical scroll bars -# if the width is less than 80 characters. Closes #1843596, -# thanks to Gerry Murphy and Lee. -# -# Revision 1.21 2007/11/15 19:11:11 fabiankeil -# Reword HTTPS URL information. -# -# Revision 1.20 2007/07/21 12:19:50 fabiankeil -# If show-url-info is called with an URL that Privoxy -# would reject as invalid, don't show unresolved forwarding -# variables, "final matches" or claim the site's secure. -# -# Revision 1.19 2007/02/10 16:55:22 fabiankeil -# - Show forwarding settings on the show-url-info page -# - Fix some HTML syntax errors. -# -# -######################################################################### -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach Privoxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the Privoxy administrator, as configured -# in the config file -# default-cgi: -# The URL for Privoxy's "main menu" builtin CGI page -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# Privoxy's version number -# code-status: -# Privoxy's development status: "alpha", "beta", or "stable". -# homepage: -# The Privoxy web site. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# url-given: -# The CGI was called with a url parameter. In that case, the -# following symbols are available: -# url: -# The given URL -# default: -# The system default for actions -# matches: -# The list of all matches in the actions file that this URL -# produced, along with the actions that were triggered by -# these matches -# final: -# The actions that are associated with the URL at the end of -# the matching process -# no-forwarder: Requests to url will be made directly. -# http-forwarder: -# Requests to url will be made through a HTTP proxy -# forward-host: -# The IP address or its hostname -# forward-port. -# The proxy port -# socks-forwarder: -# Requests to url will be made through a socks proxy -# socks-type: -# The socks type: socks4 or socks4a -# gateway-host: -# The IP address or its hostname -# gateway-port: -# The proxy port. -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy@@my-hostname@ URL Info</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> - <link rel="search" type="application/opensearchdescription+xml" title="Privoxy URL Info" href="/url-info-osd.xml"> -</head> - -<body> - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - - <tr> - <td class="box"> - - <h2>Forwarding settings:</h2> - <p> - Requests for <a href="@url@">@url@</a> will be  - - made <b>directly</b>, no forwarding settings apply - - first  - - forwarded through <b>@socks-type@-proxy @gateway-host@:@gateway-port@</b> - - and then  - - forwarded through <b>HTTP-proxy @forward-host@:@forward-port@</b>. - </td> - </tr> - <tr> - <td class="box"> - - <h2>NOTE:</h2> - <p>This is a HTTPS URL, so the part after the "/" is ignored - as Privoxy doesn't see the path for real HTTPS requests either.</p> - - - <h2>Matches for <a href="@url@">@url@</a>:</h2> - @matches@ - - - <p> - The CGI editor is currently disabled, thus no edit buttons are shown.<br> - Please have a look at the - <a href="@user-manual@config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions documentation</a> - to learn how to enable it and what the risks are. - </p> - - - </td> - </tr> - - - <tr> - <td class="warning"> - <h2>Warning:</h2> - <p> - This Privoxy version has been build without zlib support, - <strong>content filters will not work if the server sends compressed content.</strong> - Consider enabling the <a title="prevent-compression documentation" - href="@user-manual@actions-file.html#PREVENT-COMPRESSION">prevent-compression</a> - action for this URL or rebuild Privoxy with zlib support. - </p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>Final results:</h2> - <b>@final@</b> - </td> - </tr> - - - - - - <tr> - <td class="warning"> - <h2>Warning:</h2> - <p> - <strong>Privoxy is currently toggled off. Matching actions will not apply - unless you <a href="@default-cgi@toggle?set=enable">toggle Privoxy on</a> first.</strong> - </p> - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Look up the actions for a -new - URL:</h2> - <form method="GET" action="@default-cgi@show-url-info"> - <p> - <input type="text" name="url" size="80" value="@url@" class="url"> - <input type="submit" value="Go"> - </p> - </form> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/show-version b/external/privoxy/templates/show-version deleted file mode 100644 index 9bdbbba..0000000 --- a/external/privoxy/templates/show-version +++ /dev/null @@ -1,159 +0,0 @@ -########################################################## -# -# Show-Status-CGI Output template for Privoxy. -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# redirect-url: -# The URL to a script that will redirect to the Privoxy -# documentation for a given item -# invocation: -# The command line with whitch Privoxy was invoked -# options: -# The options read from the configfile, linked to their -# explanations, plus warnings if parsing acl or forward -# statements produced errors. -# sourceversions: -# A HTML-formatted list of the individual source file cvs versions -# defines: -# A HTML-formatted list of all conditional #defines used when -# Privoxy was compiled -# -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# This is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# sourceversions -# The versions. -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>Privoxy@@my-hostname@: Detailed proxy version information</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Source code versions:</h2> - <p><i>(Note: This information is only relevant if you checked out Privoxy from CVS - and compiled it yourself. If you downloaded a binary, .exe, RPM, or a .tgz file, - then when you ask for support just mention the version number <b>@version@</b> - and the type of download you got.)</i> - </p> - <pre>@sourceversions@</pre> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/toggle b/external/privoxy/templates/toggle deleted file mode 100644 index 3d63eb1..0000000 --- a/external/privoxy/templates/toggle +++ /dev/null @@ -1,180 +0,0 @@ -########################################################## -# -# Toggle Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# @if-enabled-display-then@ on @else-not-enabled-display@ off @endif-enabled-display@ -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html> - -<head> - <title>@if-enabled-display-then@Enabled@else-not-enabled-display@Disabled@endif-enabled-display@ - Privoxy@@my-hostname@</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> -</head> - -<body> - - <table cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="title"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="box"> - <h2>Privoxy is @if-enabled-display-then@Enabled@else-not-enabled-display@Disabled@endif-enabled-display@</h2> - <p>When enabled, Privoxy performs its magic - blocking - adverts, filtering cookies, regex-filtering, etc.</p> - <p>When disabled, Privoxy behaves as a normal HTTP proxy, - and will not affect your web browsing.</p> - <p><a href="@default-cgi@toggle?set=@if-enabled-display-then@disable@else-not-enabled-display@enable@endif-enabled-display@">Click - here</a> to @if-enabled-display-then@disable@else-not-enabled-display@enable@endif-enabled-display@ Privoxy.</p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>Bookmarklets</h2> - <p>Here are some bookmarklets to allow you to easily access a - "mini" version of this page. They are known to work with MS - Internet Explorer, Netscape and Mozilla, but should work equally - well in other browsers which support JavaScript. They are designed - to run directly from your bookmarks - <b>not</b> by clicking the - links below (although that will work for testing). - </p> - <p>To save them, right-click the link and choose - "Add to Favorites" (IE) or "Add Bookmark" (Netscape). You - will get a warning that the bookmark "may not be safe" - just - click OK. Then you can run the Bookmarklet directly from your - favourites/bookmarks. For even faster access, you can put - them on the "Links" bar (IE) or the "Personal Toolbar" - (Netscape), and run them with a single click. - </p> - - <ul> - <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y&set=enabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Enable</a></li> - <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y&set=disabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Disable</a></li> - <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y&set=toggle','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Toggle Privoxy</a> - (Toggles between enabled and disabled)</li> - <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - View Status</a></li> - </ul> - - <p> - <b>Credit:</b> The site which gave us the general idea for these - bookmarklets is <a href="http://www.bookmarklets.com/">www.bookmarklets.com</a>. - They have <a href="http://www.bookmarklets.com/about/">more information</a> about them. - </p> - </td> - </tr> - - <tr> - <td class="box"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> - diff --git a/external/privoxy/templates/toggle-mini b/external/privoxy/templates/toggle-mini deleted file mode 100644 index 3b5d5c9..0000000 --- a/external/privoxy/templates/toggle-mini +++ /dev/null @@ -1,91 +0,0 @@ -########################################################## -# -# Toggle Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# this is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# @if-enabled-display-then@ on @else-not-enabled-display@ off @endif-enabled-display@ -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<html> - -<head> - <title>@if-enabled-display-then@Enabled@else-not-enabled-display@Disabled@endif-enabled-display@ - Privoxy@@my-hostname@</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet"> - <link rel="shortcut icon" href="@default-cgi@favicon.ico" type="image/x-icon"> -</head> - -<body> - <p class="whiteframed"> - <a href="@default-cgi@" target="_blank">Privoxy</a> is - <b>@if-enabled-display-then@enabled@else-not-enabled-display@disabled@endif-enabled-display@</b>. - <br><a href="@default-cgi@toggle?mini=y&set=@if-enabled-display-then@disable@else-not-enabled-display@enable@endif-enabled-display@" - >@if-enabled-display-then@[Disable]@else-not-enabled-display@[Enable]@endif-enabled-display@</a> | - <a href="javascript:window.close();">[Close]</a> - </p> -</body> -</html> diff --git a/external/privoxy/templates/untrusted b/external/privoxy/templates/untrusted deleted file mode 100644 index bd4015a..0000000 --- a/external/privoxy/templates/untrusted +++ /dev/null @@ -1,191 +0,0 @@ -########################################################## -# -# "Untrusted" Error Output template for Privoxy. -# -# -# USING HTML TEMPLATES: -# --------------------- -# -# Template files are written win plain HTML, with a few -# additions: -# -# - Lines that start with a '#' character like this one -# are ignored -# -# - Each item in the below list of exported symbols will -# be replaced by dynamically generated text, if they -# are enclosed in '@'-characters. E.g. The string @version@ -# will be replaced by the version number of Privoxy. -# -# - One special application of this is to make whole blocks -# of the HTML template disappear if the condition <name> -# is not given. Simply enclose the block between the two -# strings @if-<name>start and if-<name>-end@. The strings -# should be placed in HTML comments (), so the -# html structure won't be messed when the magic happens. -# -# USABLE SYMBOLS IN THIS TEMPLATE: -# -------------------------------- -# -# my-ip-addr: -# The IP-address that the client used to reach this proxy -# my-hostname: -# The hostname associated with my-ip-addr -# admin-address: -# The email address of the pxoxy's administrator, as configured -# in the config file -# default-cgi: -# The URL for the "main menu" builtin CGI of this proxy -# menu: -# List of <li> elements linking to the other available CGIs -# version: -# The version number of the proxy software -# code-status: -# The development status of the proxy software: "alpha", "beta", -# or "stable". -# homepage: -# The URL of the SourceForge ijbswa project, who maintains this -# software. -# -# hostport: -# The host and port part of the request that lead to this problem -# path: -# The path part of the request that lead to this problem -# referrer: -# The referrer of the request that lead to this problem -# trusted-referrers: -# An HTML-formatted list of referrers that are marked as trusted in -# the trustfile -# -# -# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS: -# ------------------------------------------------------------------ -# -# unstable: -# This is an alpha or beta release of the proxy software -# have-adminaddr-info: -# An e-mail address for the local Privoxy adminstrator has -# been specified and is available through the "admin-address" -# symbol -# have-proxy-info: -# A URL for online documentation about this proxy has been -# specified and is available through the "proxy-info-url" -# symbol -# have-help-info: -# If either have-proxy-info is true or have-adminaddr-info is -# true, have-help-info is true. Used to conditionally include -# a grey box for any and all help info. -# force-support: -# Privoxy has been compiled with support for forced loading -# of blocked content. In that case, the symbol "force-prefix" is -# avaiable, which translates to the FORCE_PREFIX -# have-trust-info: -# There were URLs with info on the trust policy defined in the config -# file. In this case the list of URLs is available through the -# "trust-info" symbol. -# -# -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"><html> - -<head> - <title>Untrusted request (Privoxy@@my-hostname@)</title> - <meta http-equiv="Content-Style-Type" content="text/css"> - <meta http-equiv="Content-Script-Type" content="text/javascript"> - <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> - <meta name="robots" content="noindex,nofollow"> - <link rel="shortcut icon" href="@default-cgi@error-favicon.ico"> - <style type="text/css"> -#include cgi-style.css - </style> -</head> - -<body> - - <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%"> - <tr> - <td class="status"> - UNTRUSTED - </td> - <td class="title" style="width: 100%"> - -#include mod-title - - </td> - </tr> - - -# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in - <tr> - <td class="warning" colspan="2"> - -#include mod-unstable-warning - - </td> - </tr> - - - <tr> - <td class="warning" colspan="2"> - <h2>Request for untrusted URL</h2> - <p>Your request for <b>@protocol@@hostport@@path@</b> was blocked, - because neither the request URL itself, nor its referrer - (<b>@referrer@</b>) were trusted. - </p> - - <p>(You can <a href="@protocol@@hostport@@force-prefix@@path@">go there anyway</a>.)</p> - - </td> - </tr> - - <tr> - <td class="box" colspan="2"> - <h2>The following referrers are trusted:</h2> - <ul> - @trusted-referrers@ - </ul> - </td> - </tr> - - - <tr> - <td class="box" colspan="2"> - <h2>More information on the trust policy:</h2> - <p>You can learn more about what this means and what you may be able to do about it by - reading the following documents: - </p> - <ol> - @trust-info@ - </ol> - </td> - </tr> - - - <tr> - <td class="box" colspan="2"> - <h2>More Privoxy:</h2> - <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> - </td> - </tr> - - <tr> - <td class="info" colspan="2"> - -#include mod-support-and-service - - </td> - </tr> - - - <tr> - <td class="info" colspan="2"> - -#include mod-local-help - - </td> - </tr> - - - </table> - -</body> -</html> diff --git a/external/privoxy/templates/url-info-osd.xml b/external/privoxy/templates/url-info-osd.xml deleted file mode 100644 index 3fbaaf1..0000000 --- a/external/privoxy/templates/url-info-osd.xml +++ /dev/null @@ -1,14 +0,0 @@ -<?xml version="1.0" encoding="ISO-8859-1"?> -<OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/"> - <ShortName>Privoxy URL Info</ShortName> - <Description> - Enter a URL to see which Privoxy actions apply. - Only works while the browser is configured to use Privoxy. - </Description> - <InputEncoding>ISO-8859-1</InputEncoding> - <OutputEncoding>ISO-8859-1</OutputEncoding> - <Developer>Privoxy Team</Developer> - <Contact>ijbswa-developers(a)lists.sourceforge.net</Contact> - <Image width="16" height="16" type="image/x-icon">@default-cgi@favicon.ico</Image> - <Url type="text/html" method="GET" template="@default-cgi@show-url-info?url={searchTerms}"/> -</OpenSearchDescription> diff --git a/external/privoxy/tools/privoxy-log-parser.pl b/external/privoxy/tools/privoxy-log-parser.pl deleted file mode 100755 index 29839a4..0000000 --- a/external/privoxy/tools/privoxy-log-parser.pl +++ /dev/null @@ -1,2064 +0,0 @@ -#!/usr/bin/perl - -################################################################################ -# privoxy-log-parser -# -# A parser for Privoxy log messages. For incomplete documentation run -# perldoc privoxy-log-parser(.pl), for fancy screenshots see: -# -# http://www.fabiankeil.de/sourcecode/privoxy-log-parser/ -# -# $Id: privoxy-log-parser.pl,v 1.23 2009/03/14 15:31:58 fabiankeil Exp $ -# -# TODO: -# - LOG_LEVEL_CGI, LOG_LEVEL_ERROR, LOG_LEVEL_WRITE content highlighting -# - create fancy statistics -# - grep through Privoxy sources to find unsupported log messages -# - hunt down substitutions that match content from variables which -# can contain stuff like ()?'[] -# - replace $h{'foo'} with h('foo') where possible -# - hunt down XXX comments instead of just creating them -# - add example log lines for every regex and mark them up for -# regression testing -# - Handle incomplete input without Perl warning about undefined variables. -# - Use generic highlighting function that takes a regex and the -# hash key as input. -# -# Copyright (c) 2007-2009 Fabian Keil <fk(a)fabiankeil.de> -# -# Permission to use, copy, modify, and distribute this software for any -# purpose with or without fee is hereby granted, provided that the above -# copyright notice and this permission notice appear in all copies. -# -# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -################################################################################ - -use strict; -use warnings; -use Getopt::Long; - -use constant { - PRIVOXY_LOG_PARSER_VERSION => '0.5', - # Feel free to mess with these ... - DEFAULT_BACKGROUND => 'black', # Choose registered colour (like 'black') - DEFAULT_TEXT_COLOUR => 'white', # Choose registered colour (like 'black') - HEADER_DEFAULT_COLOUR => 'yellow', - REGISTER_HEADERS_WITH_THE_SAME_COLOUR => 1, - - CLI_OPTION_DEFAULT_TO_HTML_OUTPUT => 0, - CLI_OPTION_TITLE => 'Privoxy-Log-Parser in da house', - CLI_OPTION_NO_EMBEDDED_CSS => 0, - CLI_OPTION_NO_MSECS => 0, - CLI_OPTION_NO_SYNTAX_HIGHLIGHTING => 0, - CLI_OPTION_ERROR_LOG_FILE => '/var/log/privoxy-log.log', - CLI_OPTION_SHOW_INEFFECTIVE_FILTERS => 0, - CLI_OPTION_ACCEPT_UNKNOWN_MESSAGES => 0, - CLI_OPTION_STATISTIC => 0, - - SUPPRESS_SUCCEEDED_FILTER_ADDITIONS => 1, - SHOW_SCAN_INTRO => 0, - SHOW_FILTER_READIN_IN => 0, - SUPPRESS_EMPTY_LINES => 1, - SUPPRESS_SUCCESSFUL_CONNECTIONS => 1, - SUPPRESS_ACCEPTED_CONNECTIONS => 1, - SUPPRESS_GIF_NOT_CHANGED => 1, - SUPPRESS_NEED_TO_DE_CHUNK_FIRST => 1, - - DEBUG_HEADER_REGISTERING => 0, - DEBUG_HEADER_HIGHLIGHTING => 0, - DEBUG_TICKS => 0, - DEBUG_PAINT_IT => 0, - DEBUG_SUPPRESS_LOG_MESSAGES => 0, - - PUNISH_MISSING_LOG_KNOWLEDGE_WITH_DEATH => 0, - PUNISH_MISSING_HIGHLIGHT_KNOWLEDGE_WITH_DEATH => 1, - - LOG_UNPARSED_LINES_TO_EXTRA_FILE => 0, - - # You better leave these alone unless you know what you're doing. - COLOUR_RESET => "\033[0;0m", - ESCAPE => "\033[", -}; - -sub prepare_our_stuff () { - - # Syntax Higlight hash - our @all_colours = ( - 'red', 'green', 'brown', 'blue', 'purple', 'cyan', - 'light_gray', 'light_red', 'light_green', 'yellow', - 'light_blue', 'pink', 'light_cyan', 'white' - ); - - our %h = ( - # LOG_LEVEL - Info => 'blue', - Header => 'green', - Filter => 'purple', # XXX: Used? - 'Re-Filter' => 'purple', - Connect => 'brown', - Request => 'light_cyan', - CGI => 'light_green', - Redirect => 'cyan', - Error => 'light_red', - Crunch => 'cyan', - 'Fatal error' => 'light_red', - 'Gif-Deanimate' => 'blue', - Force => 'red', - Writing => 'light_green', - # ---------------------- - URL => 'yellow', - path => 'brown', - request_ => 'brown', # host+path but no protocol - 'ip-address' => 'yellow', - Number => 'yellow', - Standard => 'reset', - Truncation => 'light_red', - Status => 'brown', - Timestamp => 'brown', - Crunching => 'light_red', - crunched => 'light_red', - 'Request-Line' => 'pink', - method => 'purple', - destination => 'yellow', - 'http-version' => 'pink', - 'crunch-pattern' => 'pink', - not => 'brown', - file => 'brown', - signal => 'yellow', - version => 'green', - 'program-name' => 'cyan', - port => 'red', - host => 'red', - warning => 'light_red', - debug => 'light_red', - filter => 'green', - tag => 'green', - tagger => 'green', - 'status-message' => 'light_cyan', - 'status-code' => 'yellow', - 'invalid-request' => 'light_red', - 'hits' => 'yellow', - error => 'light_red', - 'rewritten-URL' => 'light_red', - 'pcrs-delimiter' => 'light_red', - 'ignored' => 'light_red', - 'action-bits-update' => 'light_red', - 'configuration-line' => 'red', - 'content-type' => 'yellow', - ); - - our %h_colours = %h; - - # Header colours need their own hash so the keys can be accessed properly - our %header_colours = ( - # Prefilled with headers that should not appear with default header colours - Cookie => 'light_red', - 'Set-Cookie' => 'light_red', - Warning => 'light_red', - Default => HEADER_DEFAULT_COLOUR, - ); - - # Crunch reasons need their own hash as well - our %reason_colours = ( - 'Unsupported HTTP feature' => 'light_red', - Blocked => 'light_red', - Untrusted => 'light_red', - Redirected => 'green', - 'CGI Call' => 'white', - 'DNS failure' => 'red', - 'Forwarding failed' => 'light_red', - 'Connection failure' => 'light_red', - 'Out of memory (may mask other reasons)' => 'light_red', - 'No reason recorded' => 'light_red', - ); - - our @time_colours = ('white', 'light_gray'); - - # Translate highlight strings into highlight code - prepare_highlight_hash(\%header_colours); - prepare_highlight_hash(\%reason_colours); - prepare_highlight_hash(\%h); - prepare_colour_array(\@all_colours); - prepare_colour_array(\@time_colours); - init_css_colours(); -} - -sub paint_it ($) { -############################################################### -# Takes a colour string and returns an ANSI escape sequence -# (unless --no-syntax-highlighting is used). -# XXX: The Rolling Stones reference has to go. -############################################################### - - my $colour = shift @_; - - return "" if cli_option_is_set('no-syntax-highlighting'); - - my %light = ( - black => 0, - red => 0, - green => 0, - brown => 0, - blue => 0, - purple => 0, - cyan => 0, - light_gray => 0, - gray => 0, - dark_gray => 1, - light_red => 1, - light_green => 1, - yellow => 1, - light_blue => 1, - pink => 1, - light_cyan => 1, - white => 1, - ); - - my %text = ( - black => 30, - red => 31, - green => 32, - brown => 33, - blue => 34, - purple => 35, - cyan => 36, - gray => 37, - light_gray => 37, - dark_gray => 30, - light_red => 31, - light_green => 32, - yellow => 33, - light_blue => 34, - pink => 35, - light_cyan => 36, - white => 37, - ); - - my $bg_code = get_background(); - my $colour_code; - our $default = default_colours(); - - if (defined($text{$colour})) { - $colour_code = ESCAPE; - $colour_code .= $text{$colour}; - $colour_code .= ";"; - $colour_code .= $light{$colour} ? "1" : "2"; - $colour_code .= ";"; - $colour_code .= $bg_code; - $colour_code .= "m"; - debug_message $colour . " is \'" . $colour_code . $colour . $default . "\'" if DEBUG_PAINT_IT; - - } elsif ($colour =~ /reset/) { - - $colour_code = default_colours(); - - } else { - - die "What's $colour supposed to mean?\n"; - } - - return $colour_code; -} - -sub get_semantic_html_markup ($) { -############################################################### -# Takes a string and returns a span element -############################################################### - - my $type = shift @_; - my $code; - - if ($type =~ /Standard/) { - $code = '</span>'; - } else { - $type = lc($type); - $code = '<span title="' . $type . '" class="' . $type . '">'; - } - - return $code; -} - -sub cli_option_is_set ($) { - - our %cli_options; - my $cli_option = shift; - - die "Unknown CLI option: $cli_option" unless defined $cli_options{$cli_option}; - - return $cli_options{$cli_option}; -} - -sub get_html_title () { - - our %cli_options; - return $cli_options{'title'}; - -} - -sub init_css_colours() { - - our %css_colours = ( - black => "000", - red => "F00", - green => "0F0", - brown => "C90", - blue => "0F0", - purple => "F06", # XXX: wrong - cyan => "F09", # XXX: wrong - light_gray => "999", - gray => "333", - dark_gray => "222", - light_red => "F33", - light_green => "33F", - yellow => "FF0", - light_blue => "30F", - pink => "F0F", - light_cyan => "66F", - white => "FFF", - ); -} - -sub get_css_colour ($) { - - our %css_colours; - my $colour = shift; - - die "What's $colour supposed to mean?\n" unless defined($css_colours{$colour}); - - return '#' . $css_colours{$colour}; -} - -sub get_css_line ($) { - - our %h_colours; - - my $class = shift; - my $css_line; - - $css_line .= '.' . lc($class) . ' {'; # XXX: lc() shouldn't be necessary - die "What's $class supposed to mean?\n" unless defined($h_colours{$class}); - $css_line .= 'color:' . get_css_colour($h_colours{$class}) . ';'; - $css_line .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';'; - $css_line .= '}' . "\n"; - - return $css_line; -} - -sub get_css_line_for_colour ($) { - - our %h_colours; - - my $colour = shift; - my $css_line; - - $css_line .= '.' . lc($colour) . ' {'; # XXX: lc() shouldn't be necessary - $css_line .= 'color:' . get_css_colour($colour) . ';'; - $css_line .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';'; - $css_line .= '}' . "\n"; - - return $css_line; -} - -# XXX: Wrong solution -sub get_missing_css_lines () { - - my $css_line; - - $css_line .= '.' . 'default' . ' {'; # XXX: lc() shouldn't be necessary - $css_line .= 'color:' . HEADER_DEFAULT_COLOUR . ';'; - $css_line .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';'; - $css_line .= '}' . "\n"; - - return $css_line; -} - -sub get_css () { - - our %h_colours; - our %css_colours; #XXX: Wrong solution - - my $css = ''; - - $css .= '.privoxy-log {'; - $css .= 'color:' . get_css_colour(DEFAULT_TEXT_COLOUR) . ';'; - $css .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';'; - $css .= '}' . "\n"; - - foreach my $key (keys %h_colours) { - - next if ($h_colours{$key} =~ m/reset/); #XXX: Wrong solution. - $css .= get_css_line($key); - - } - - foreach my $colour (keys %css_colours) { - - $css .= get_css_line_for_colour($colour); - - } - - $css .= get_missing_css_lines(); #XXX: Wrong solution - - return $css; -} - -sub print_intro () { - - my $intro = ''; - - if (cli_option_is_set('html-output')) { - - my $title = get_html_title(); - - $intro .= '<html><head>'; - $intro .= '<title>' . $title . '</title>'; - $intro .= '<style>' . get_css() . '</style>' unless cli_option_is_set('no-embedded-css'); - $intro .= '</head><body>'; - $intro .= '<h1>' . $title . '</h1><p class="privoxy-log">'; - - print $intro; - } -} - -sub print_outro () { - - my $outro = ''; - - if (cli_option_is_set('html-output')) { - - $outro = '</p></body></html>'; - print $outro; - - } -} - -sub get_line_end () { - - my $line_end = "\n"; - - $line_end = '<br>' . $line_end if cli_option_is_set('html-output'); - - return $line_end; -} - -sub get_colour_html_markup ($) { -############################################################### -# Takes a colour string a span element. XXX: WHAT? -# XXX: This function shouldn't be necessary, the -# markup should always be semantically correct. -############################################################### - - my $type = shift @_; - my $code; - - if ($type =~ /Standard/) { - $code = '</span>'; - } else { - $code = '<span class="' . lc($type) . '">'; - } - - return $code; -} - -sub default_colours () { - # XXX: Properly - our $bg_code; - return reset_colours(); -} - -sub show_colours () { - # XXX: Implement -} - -sub reset_colours () { - return ESCAPE . "0m"; -} - -sub set_background ($){ - - my $colour = shift; - our $bg_code; - my %backgrounds = ( - black => "40", - red => "41", - green => "42", - brown => "43", - blue => "44", - magenta => "45", - cyan => "46", - white => "47", - default => "49", - ); - - if (defined($backgrounds{$colour})) { - $bg_code = $backgrounds{$colour}; - } else { - die "Invalid background colour: " . $colour; - } -} - -sub get_background (){ - return our $bg_code; -} - -sub prepare_highlight_hash ($) { - my $ref = shift; - - if (!cli_option_is_set('html-output')) { - - foreach my $key (keys %$ref) { - $$ref{$key} = paint_it($$ref{$key}); - } - - } else { - - foreach my $key (keys %$ref) { - $$ref{$key} = get_semantic_html_markup($key); - } - - } -} - -sub prepare_colour_array ($) { - my $ref = shift; - - if (!cli_option_is_set('html-output')) { - - foreach my $i (0 ... @$ref - 1) { - $$ref[$i] = paint_it($$ref[$i]); - } - - } else { - - foreach my $i (0 ... @$ref - 1) { - $$ref[$i] = get_colour_html_markup($$ref[$i]); - } - - } -} - -sub found_unknown_content ($) { - - my $unknown = shift; - my $message; - - our %req; - our $t; - - return if cli_option_is_set('accept-unknown-messages'); - - return if ($unknown =~ /\[too long, truncated\]$/); - - $message = "found_unknown_content: Don't know how to highlight: "; - # Break line so the log file can later be parsed as Privoxy log file again - $message .= '"' . $unknown . '"' . " in:\n"; - $message .= $req{$t}{'log-message'}; - debug_message($message); - log_parse_error($req{$t}{'log-message'}); - - die "Unworthy content parser" if PUNISH_MISSING_LOG_KNOWLEDGE_WITH_DEATH; -} - -sub log_parse_error ($) { - - my $message = shift; - - if (LOG_UNPARSED_LINES_TO_EXTRA_FILE) { - open(ERRORLOG, ">>" . ERROR_LOG_FILE) || die "Writing " . ERROR_LOG_FILE . " failed"; - print ERRORLOG $message; - close(ERRORLOG); - } -} - -sub debug_message (@) { - my @message = @_; - our %h; - - print $h{'debug'} . "@message" . $h{'Standard'} . "\n"; -} - -################################################################################ -# highlighter functions that aren't loglevel-specific -################################################################################ - -sub h ($) { - - # Get highlight marker - our %h; - my $highlight = shift; # XXX: Stupid name; - my $result = ''; - my $message; - - if (defined($highlight)) { - - $result = $h{$highlight}; - - } else { - - $message = "h: Don't recognize highlighter $highlight."; - debug_message($message); - log_parser_error($message); - die "Unworthy highlighter function" if PUNISH_MISSING_HIGHLIGHT_KNOWLEDGE_WITH_DEATH; - } - - return $result; -} - -sub highlight_known_headers ($) { - - my $content = shift; - our %header_colours; - our %h; - my $headers = join ('|', keys %header_colours); - - debug_message("Searching $content for things to highlight.") if DEBUG_HEADER_HIGHLIGHTING; - - if ($content =~ m/(?<=\s)($headers):/) { - my $header = $1; - $content =~ s@(?<=[\s|'])($header)(?=:)@$header_colours{$header}$1$h{'Standard'}@ig; - debug_message("Highlighted $content") if DEBUG_HEADER_HIGHLIGHTING; - } - - return $content; -} - -sub highlight_matched_request_line ($$) { - - my $result = shift; # XXX: Stupid name; - my $regex = shift; - if ($result =~ m@(.*)($regex)(.*)@) { - $result = $1 . highlight_request_line($2) . $3 - } - return $result; -} - -sub highlight_request_line ($) { - - my $rl = shift; - my ($method, $url, $http_version); - our %h; - - #GET http://images.sourceforge.net/sfx/icon_warning.gif HTTP/1.1 - if ($rl =~ m/Invalid request/) { - - $rl = h('invalid-request') . $rl . h('Standard'); - - } elsif ($rl =~ m/^([-\w]+) (.*) (HTTP\/\d\.\d)/) { - - # XXX: might not match in case of HTTP method fuzzing. - # XXX: save these: ($method, $path, $http_version) = ($1, $2, $3); - $rl =~ s@^(\w+)@$h{'method'}$1$h{'Standard'}@; - if ($rl =~ /http:\/\//) { - $rl = highlight_matched_url($rl, '[^\s]*(?=\sHTTP)'); - } else { - $rl = highlight_matched_pattern($rl, 'request_', '[^\s]*(?=\sHTTP)'); - } - - $rl =~ s@(HTTP\/\d\.\d)$@$h{'http-version'}$1$h{'Standard'}@; - - } elsif ($rl =~ m/\.\.\. \[too long, truncated\]$/) { - - $rl =~ s@^(\w+)@$h{'method'}$1$h{'Standard'}@; - $rl = highlight_matched_url($rl, '[^\s]*(?=\.\.\.)'); - - } elsif ($rl =~ m/^ $/) { - - $rl = h('error') . "No request line specified!" . h('Standard'); - - } else { - - debug_message ("Can't parse request line: $rl"); - - } - - return $rl; -} - -sub highlight_response_line ($) { - - my $rl = shift; - my ($http_version, $status_code, $status_message); - - #HTTP/1.1 200 OK - #ICY 200 OK - - # TODO: Mark different status codes differently - - if ($rl =~ m/((?:HTTP\/\d\.\d|ICY)) (\d+) (.*)/) { - ($http_version, $status_code, $status_message) = ($1, $2, $3); - } else { - debug_message ("Can't parse response line: $rl") and die 'Fix this'; - } - - # Rebuild highlighted - $rl= ""; - $rl .= h('http-version') . $http_version . h('Standard'); - $rl .= " "; - $rl .= h('status-code') . $status_code . h('Standard'); - $rl .= " "; - $rl .= h('status-message') . $status_message . h('Standard'); - - return $rl; -} - -sub highlight_matched_url ($$) { - - my $result = shift; # XXX: Stupid name; - my $regex = shift; - - #print "Got $result, regex ($regex)\n"; - - if ($result =~ m@(.*?)($regex)(.*)@) { - $result = $1 . highlight_url($2) . $3; - #print "Now the result is $result\n"; - } - - return $result; -} - -sub highlight_matched_host ($$) { - - my $result = shift; # XXX: Stupid name; - my $regex = shift; - - if ($result =~ m@(.*?)($regex)(.*)@) { - $result = $1 . h('host') . $2 . h('Standard') . $3; - } - - return $result; -} - -sub highlight_matched_pattern ($$$) { - - our %h; - my $result = shift; # XXX: Stupid name; - my $key = shift; - my $regex = shift; - - die "Unknown key $key" unless defined $h{$key}; - - if ($result =~ m@(.*?)($regex)(.*)@) { - $result = $1 . h($key) . $2 . h('Standard') . $3; - } - - return $result; -} - -sub highlight_matched_path ($$) { - - my $result = shift; # XXX: Stupid name; - my $regex = shift; - - if ($result =~ m@(.*?)($regex)(.*)@) { - $result = $1 . h('path') . $2 . h('Standard') . $3; - } - - return $result; -} - -sub highlight_url ($) { - - my $url = shift; - - if (cli_option_is_set('html-output')) { - - $url = '<a href="' . $url . '">' . $url . '</a>'; - - } else { - - $url = h('URL') . $url . h('Standard'); - - } - - return $url; -} - -################################################################################ -# loglevel-specific highlighter functions -################################################################################ - -sub handle_loglevel_header ($) { - - my $content = shift; - my $c = $content; - our $t; - our %req; - our %h; - our %header_colours; - our @all_colours; - our $header_colour_index; - our $no_special_header_highlighting; - - # Register new headers - # scan: Accept: image/png,image/*;q=0.8,*/*;q=0.5 - if ($c =~ m/^scan: ((?>[^:]+)):/) { - my $header = $1; - if (!defined($header_colours{$header}) and $header =~ /^[\d\w-]*$/) { - debug_message "Registering previously unknown header $1" if DEBUG_HEADER_REGISTERING; - - if (REGISTER_HEADERS_WITH_THE_SAME_COLOUR) { - $header_colours{$header} = $header_colours{'Default'}; - } else { - $header_colours{$header} = $all_colours[$header_colour_index % @all_colours]; - $header_colour_index++; - } - } - } - - if ($c =~ m/^scan: ((\w*) (.*) (HTTP\/\d\.\d))/) { - - # Client request line - # Save for statistics (XXX: Not implemented yet) - $req{$t}{'method'} = $2; - $req{$t}{'destination'} = $3; - $req{$t}{'http-version'} = $4; - - $content = highlight_request_line($1); - - } elsif ($c =~ m/^(scan: )((?:HTTP\/\d\.\d|ICY) (\d+) (.*))/) { - - # Server response line - $req{$t}{'response_line'} = $2; - $req{$t}{'status_code'} = $3; - $req{$t}{'status_message'} = $4; - $content = $1 . highlight_response_line($req{$t}{'response_line'}); - - } elsif ($c =~ m/^Crunching (?:server|client) header: .* $contains: ([^$]*)\)/) { - - # Crunching server header: Set-Cookie: trac_form_token=d5308c34e16d15e9e301a456; (contains: Cookie:) - $content =~ s@(?<=contains: )($1)@$h{'crunch-pattern'}$1$h{'Standard'}@; - $content =~ s@(Crunching)@$h{$1}$1$h{'Standard'}@; - - } elsif ($c =~ m/^New host is: ([^\s]*)\./) { - - # New host is: trac.vidalia-project.net. Crunching Referer: http://www.vidalia-project.net/ - $c = highlight_matched_host($c, '(?<=New host is: )[^\s]+'); - $content = highlight_matched_url($c, '(?<=Crunching Referer: )[^\s]+'); - - } elsif ($c =~ m/^Text mode enabled by force. (Take cover)!/) { - - # Text mode enabled by force. Take cover! - $content =~ s@($1)@$h{'warning'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^(New HTTP Request-Line: )(.*)/) { - - # New HTTP Request-Line: GET http://www.privoxy.org/ HTTP/1.1 - $content = $1 . highlight_request_line($2); - - } elsif ($c =~ m/^Adjust(ed)? Content-Length to \d+/) { - - # Adjusted Content-Length to 2132 - # Adjust Content-Length to 33533 - $content =~ s@(?<=Content-Length to )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $content = highlight_known_headers($content); - - } elsif ($c =~ m/^Destination extracted from "Host:" header. New request URL:/) { - - # Destination extracted from "Host:" header. New request URL: http://www.cccmz.de/~ridcully/blog/ - $content = highlight_matched_url($content, '(?<=New request URL: ).*'); - - } elsif ($c =~ m/^Couldn\'t parse:/) { - - # XXX: These should probable be logged with LOG_LEVEL_ERROR - # Couldn't parse: If-Modified-Since: Wed, 21 Mar 2007 16:34:50 GMT (crunching!) - # Couldn't parse: at, 24 Mar 2007 13:46:21 GMT in If-Modified-Since: Sat, 24 Mar 2007 13:46:21 GMT (crunching!) - $content =~ s@^(Couldn\'t parse)@$h{'error'}$1$h{'Standard'}@; - - } elsif ($c =~ /^Tagger \'([^\']*)\' added tag \'([^\']*)\'/ or - $c =~ m/^Adding tag \'([^\']*)\' created by header tagger \'([^\']*)\'/) { - - # Adding tag 'GET request' created by header tagger 'method-man' (XXX: no longer used) - # Tagger 'revalidation' added tag 'REVALIDATION-REQUEST'. No action bit update necessary. - # Tagger 'revalidation' added tag 'REVALIDATION-REQUEST'. Action bits updated accordingly. - - # XXX: Save tag and tagger - - $content =~ s@(?<=^Tagger \')([^\']*)@$h{'tagger'}$1$h{'Standard'}@; - $content =~ s@(?<=added tag \')([^\']*)@$h{'tag'}$1$h{'Standard'}@; - $content =~ s@(?<=Action bits )(updated)@$h{'action-bits-update'}$1$h{'Standard'}@; - $no_special_header_highlighting = 1; - - } elsif ($c =~ /^Tagger \'([^\']*)\' didn['']t add tag \'([^\']*)\'/) { - - # Tagger 'revalidation' didn't add tag 'REVALIDATION-REQUEST'. Tag already present - # XXX: Save tag and tagger - - $content =~ s@(?<=^Tagger \')([^\']*)@$h{'tag'}$1$h{'Standard'}@; - $content =~ s@(?<=didn['']t add tag \')([^\']*)@$h{'tagger'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^(?:scan:|Randomiz|addh:|Adding:|Removing:|Referer:|Modified:|Accept-Language header|[Cc]ookie)/ - or $c =~ m/^(Text mode is already enabled|Denied request with NULL byte|Replaced:|add-unique:)/ - or $c =~ m/^(Crunched (incoming|outgoing) cookie|Suppressed offer|Accepted the client)/ - or $c =~ m/^(addh-unique|Referer forged to)/ - or $c =~ m/^Downgraded answer to HTTP\/1.0/ - or $c =~ m/^Parameter: \+hide-referrer\{[^\}]*\} is a bad idea, but I don\'t care./ - or $c =~ m/^Referer (?:overwritten|replaced) with: Referer: / #XXX: should this be highlighted? - or $c =~ m/^Referer crunched!/ - or $c =~ m/^crunched x-forwarded-for!/ - or $c =~ m/^crunched From!/ - or $c =~ m/^ modified$/ - or $c =~ m/^Content filtering is enabled. Crunching:/ - or $c =~ m/^force-text-mode overruled the client/ - or $c =~ m/^Server time in the future\./ - or $c =~ m/^content-disposition header crunched and replaced with:/i - or $c =~ m/^Reducing white space in / - or $c =~ m/^Ignoring single quote in / - or $c =~ m/^Converting tab to space in / - or $c =~ m/A HTTP\/1\.1 response without/ - or $c =~ m/Disabled filter mode on behalf of the client/ - ) - { - # XXX: Some of these may need highlighting - - # Modified: User-Agent: Mozilla/5.0 (X11; U; SunOS i86pc; pl-PL; rv:1.8.1.1) Gecko/20070214 Firefox/2.0.0.1 - # Accept-Language header crunched and replaced with: Accept-Language: pl-pl - # cookie 'Set-Cookie: eZSessionCookie=07bfec287c197440d299f81580593c3d; \ - # expires=Thursday, 12-Apr-07 15:16:18 GMT; path=/' send by \ - # http://wirres.net/article/articleview/4265/1/6/ appears to be using time format 1 (XXX: gone with the wind) - # Cookie rewritten to a temporary one: Set-Cookie: NSC_gffe-iuuq-mc-wtfswfs=8efb33a53660;path=/ - # Text mode is already enabled - # Denied request with NULL byte(s) turned into line break(s) - # Replaced: 'Connection: Yo, home to Bel Air' with 'Connection: close' - # addh-unique: Host: people.freebsd.org - # Suppressed offer to compress content - # Crunched incoming cookie -- yum! - # Accepted the client's request to fetch without filtering. - # Crunched outgoing cookie: Cookie: PREF=ID=6cf0abd347b30262:TM=1173357617:LM=1173357617:S=jZypyyJ7LPiwFi1_ - # addh-unique: Host: subkeys.pgp.net:11371 - # Referer forged to: Referer: http://10.0.0.1/ - # Downgraded answer to HTTP/1.0 - # Parameter: +hide-referrer{pille-palle} is a bad idea, but I don't care. - # Referer overwritten with: Referer: pille-palle - # Referer replaced with: Referer: pille-palle - # crunched x-forwarded-for! - # crunched From! - # modified # XXX: pretty stupid log message - # Content filtering is enabled. Crunching: 'Range: 1234-5678' to prevent range-mismatch problems - # force-text-mode overruled the client's request to fetch without filtering! - # Server time in the future. - # content-disposition header crunched and replaced with: content-disposition: filename=baz - # Content-Disposition header crunched and replaced with: content-disposition: filename=baz - # Reducing white space in 'X-LWS-Test: "This is quoted" this is not "this is " but " this again is not' - # Ignoring single quote in 'X-LWS-Test: "This is quoted" this is not "this is " but " this again is not' - # Converting tab to space in 'X-LWS-Test: "This is quoted" this is not "this is " but "\ - # this again is not' - # A HTTP/1.1 response without Connection header implies keep-alive. - # Disabled filter mode on behalf of the client. - - } elsif ($c =~ m/^scanning headers for:/) { - - return '' unless SHOW_SCAN_INTRO; - - } elsif ($c =~ m/^[Cc]runch(ing|ed)|crumble crunched:/) { - # crunched User-Agent! - # Crunching: Content-Encoding: gzip - - $content =~ s@(Crunching|crunched)@$h{$1}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Offending request data with NULL bytes turned into \'°\' characters:/) { - - # Offending request data with NULL bytes turned into '°' characters: °°n°°(°°° - - $content = h('warning') . $content . h('Standard'); - - } elsif ($c =~ m/^(Transforming \")(.*?)(\" to \")(.*?)(\")/) { - - # Transforming "Proxy-Authenticate: Basic realm="Correos Proxy Server"" to\ - # "Proxy-Authenticate: Basic realm="Correos Proxy Server"" - - $content =~ s@(?<=^Transforming \")(.*)(?=\" to)@$h{'Header'}$1$h{'Standard'}@; - $content =~ s@(?<=to \")(.*)(?=\")@$h{'Header'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Removing empty header/) { - - # Removing empty header - # Ignore for now - - } elsif ($c =~ m/^Content-Type: .* not replaced/) { - - # Content-Type: application/octet-stream not replaced. It doesn't look like text.\ - # Enable force-text-mode if you know what you're doing. - # XXX: Could highlight more here. - $content =~ s@(?<=^Content-Type: )(.*)(?= not replaced)@$h{'content-type'}$1$h{'Standard'}@; - - } else { - - found_unknown_content($content); - } - - # Highlight headers - unless ($c =~ m/^Transforming/) { - $content = highlight_known_headers($content) unless $no_special_header_highlighting; - } - - return $content; -} - -sub handle_loglevel_re_filter ($) { - - my $content = shift; - my $c = $content; - my $key; - our $t; - our %req; - our %h; - our %header_colours; - our @all_colours; - our $header_colour_index; - - if ($c =~ /\.{3}$/ - and $c =~ m/^(?:re_)?filtering \'?(.*?)\'? $size (\d*)$ with (?:filter )?\'?([^\s]*?)\'? ?\.{3}$/) { - - # Used by Privoxy 3.0.5 and 3.0.6: - # XXX: Fill in ... - # Used by Privoxy 3.0.7: - # filtering 'Connection: close' (size 17) with 'generic-content-ads' ... - - $req{$t}{'filtered_header'} = $1; - $req{$t}{'old_header_size'} = $2; - $req{$t}{'header_filter_name'} = $3; - - unless (cli_option_is_set('show-ineffective-filters') or - $req{$t}{'header_filter_name'} =~ m/^privoxy-filter-test$/) { - return ''; - } - $content =~ s@(?<=$size )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $content =~ s@($req{$t}{'header_filter_name'})@$h{'filter'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^ ?\.\.\. ?produced (\d*) hits \(new size (\d*)$\./) { - - # ...produced 0 hits (new size 23). - #... produced 1 hits (new size 54). - - $req{$t}{'header_filter_hits'} = $1; - $req{$t}{'new_header_size'} = $2; - - unless (cli_option_is_set('show-ineffective-filters') or - (defined($req{$t}{'header_filter_name'}) and - $req{$t}{'header_filter_name'} =~ m/^privoxy-filter-test$/)) { - - if ($req{$t}{'header_filter_hits'} == 0 and - not (defined($req{$t}{'header_filter_name'}) and - $req{$t}{'header_filter_name'} =~ m/^privoxy-filter-test$/)) { - return ''; - } - # Reformat including information from the intro - $c = "'" . h('filter') . $req{$t}{'header_filter_name'} . h('Standard') . "'"; - $c .= " hit "; - # XXX: Hide behind constant, it may be interesting if LOG_LEVEL_HEADER isn't enabled as well. - # $c .= $req{$t}{'filtered_header'} . " "; - $c .= h('Number') . $req{$t}{'header_filter_hits'}. h('Standard'); - $c .= ($req{$t}{'header_filter_hits'} == 1) ? " time, " : " times, "; - - if ($req{$t}{'old_header_size'} != $req{$t}{'new_header_size'}) { - - $c .= "changing size from "; - $c .= h('Number') . $req{$t}{'old_header_size'} . h('Standard'); - $c .= " to "; - $c .= h('Number') . $req{$t}{'new_header_size'} . h('Standard'); - $c .= "."; - - } else { - - $c .= "keeping the size at " . $req{$t}{'old_header_size'}; - - } - - # Highlight from last line (XXX: What?) - # $c =~ s@(?<=produced )(\d+)@$h{'Number'}$1$h{'Standard'}@; - # $c =~ s@($req{$t}{'header_filter_name'})@$h{'filter'}$1$h{'Standard'}@; - - } else { - - # XXX: Untested - $c =~ s@(?<=produced )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=new size )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } - $content = $c; - - } elsif ($c =~ m/^(Tagger|Filter) ([^\s]*) has empty joblist. Nothing to do./) { - - # Filter privoxy-filter-test has empty joblist. Nothing to do. - # Tagger variable-test has empty joblist. Nothing to do. - - $content =~ s@(?<=$1 )([^\s]*)@$h{'filter'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^(?:re_)?filtering ([^\s]+) $size (\d+)$ with (?:filter )?\'?([^\s]+?)\'? produced (\d+) hits $new size (\d+)$/) { - - # XXX: only the second version gets highlighted properly. - # re_filtering www.lfk.de/favicon.ico (size 209) with filter untrackable-hulk produced 0 hits (new size 209). - # filtering aci.blogg.de/ (size 37988) with 'blogg.de' produced 3 hits (new size 38057) - $req{$t}{'content_source'} = $1; - $req{$t}{'content_size'} = $2; - $req{$t}{'content_filter'} = $3; - $req{$t}{'content_hits'} = $4; - $req{$t}{'new_content_size'} = $5; - $req{$t}{'content_size_change'} = $req{$t}{'new_content_size'} - $req{$t}{'content_size'}; - #return '' if ($req{$t}{'content_hits'} == 0 && !cli_option_is_set('show-ineffective-filters')); - if ($req{$t}{'content_hits'} == 0 and - not (cli_option_is_set('show-ineffective-filters') - or ($req{$t}{'content_filter'} =~ m/^privoxy-filter-test$/))) { - return ''; - } - - $c =~ s@(?<=$size )(\d+)$(?= with)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=\(new size )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=produced )(\d+)(?= hits)@$h{'Number'}$1$h{'Standard'}@; - - $c =~ s@([^\s]+?)(\'? produced)@$h{'filter'}$1$h{'Standard'}$2@; - $c = highlight_matched_host($c, '(?<=filtering )[^\s]+'); - - $c =~ s@\.$@ @; - $c .= "(" . $h{'Number'}; - $c .= "+" if ($req{$t}{'content_size_change'} >= 0); - $c .= $req{$t}{'content_size_change'} . $h{'Standard'} . ")"; - $content = $c; - - } elsif ($c =~ m/^De-chunking successful. Shrunk from (\d+) to (\d+)/) { - - $req{$t}{'chunked-size'} = $1; - $req{$t}{'dechunked-size'} = $2; - $req{$t}{'dechunk-change'} = $req{$t}{'dechunked-size'} - $req{$t}{'chunked-size'}; - - $content .= " (" . h('Number') . $req{$t}{'dechunk-change'} . h('Standard') . ")"; - - $content =~ s@(?<=from )($req{$t}{'chunked-size'})@$h{'Number'}$1$h{'Standard'}@; - $content =~ s@(?<=to )($req{$t}{'dechunked-size'})@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Decompression successful. Old size: (\d+), new size: (\d+)./) { - - # Decompression successful. Old size: 670, new size: 1166. - - $req{$t}{'size-compressed'} = $1; - $req{$t}{'size-decompressed'} = $2; - $req{$t}{'decompression-gain'} = $req{$t}{'size-decompressed'} - $req{$t}{'size-compressed'}; - - $content =~ s@(?<=Old size: )($req{$t}{'size-compressed'})@$h{'Number'}$1$h{'Standard'}@; - $content =~ s@(?<=new size: )($req{$t}{'size-decompressed'})@$h{'Number'}$1$h{'Standard'}@; - - # XXX: Create sub get_percentage() - if ($req{$t}{'size-decompressed'}) { - $req{$t}{'decompression-gain-percent'} = - $req{$t}{'decompression-gain'} / $req{$t}{'size-decompressed'} * 100; - - $content .= " (saved: "; - #$content .= h('Number') . $req{$t}{'decompression-gain'} . h('Standard'); - #$content .= "/"; - $content .= h('Number') . sprintf("%.2f%%", $req{$t}{'decompression-gain-percent'}) . h('Standard'); - $content .= ")"; - } - - } elsif ($c =~ m/^(Need to de-chunk first)/) { - - # Need to de-chunk first - return '' if SUPPRESS_NEED_TO_DE_CHUNK_FIRST; - - } elsif ($c =~ m/^(Adding (?:dynamic )?re_filter job)/) { - - return '' if (SUPPRESS_SUCCEEDED_FILTER_ADDITIONS && m/succeeded/); - - # Adding re_filter job ... - # Adding dynamic re_filter job s@^(?:\w*)\s+.*\s+HTTP/\d\.\d\s*@IP-ADDRESS: $origin@D\ - # to filter client-ip-address succeeded. - - } elsif ($c =~ m/^Reading in filter/) { - - return '' unless SHOW_FILTER_READIN_IN; - - } else { - - found_unknown_content($content); - - } - - return $content; -} - -sub handle_loglevel_redirect ($) { - - my $c = shift; - our $t; - our %req; - our %h; - - if ($c =~ m/^Decoding "([^""]*)"/) { - - $req{$t}{'original-destination'} = $1; - $c = highlight_matched_path($c, '(?<=Decoding ")[^"]*'); - $c =~ s@\"@@g; - - } elsif ($c =~ m/^Checking/) { - - # Checking /_ylt=A0geu.Z76BRGR9k/**http://search.yahoo.com/search?p=view+odb+presentation+on+freebsd\ - # &ei=UTF-8&xargs=0&pstart=1&fr=moz2&b=11 for redirects. - - # TODO: Change colour if really url-decoded - $req{$t}{'decoded-original-destination'} = $1; - $c = highlight_matched_path($c, '(?<=Checking ")[^"]*'); - $c =~ s@\"@@g; - - } elsif ($c =~ m/^pcrs command "([^""]*)" changed "([^""]*)" to "([^""]*)" $(\d+) hits?$/) { - - # pcrs command "s@&from=rss@@" changed "http://it.slashdot.org/article.pl?sid=07/03/02/1657247&from=rss"\ - # to "http://it.slashdot.org/article.pl?sid=07/03/02/1657247" (1 hit). - - my ($pcrs_command, $url_before, $url_after, $hits) = ($1, $2, $3, $4); # XXX: save these? - - $c =~ s@(?<=pcrs command )"([^""]*)"@$h{'filter'}$1$h{'Standard'}@; - $c = highlight_matched_url($c, '(?<=changed ")[^""]*'); - $c =~ s@(?<=changed )"([^""]*)"@$1@; # Remove quotes - $c = highlight_matched_url($c, '(?<=to ")[^""]*'); - $c =~ s@(?<=to )"([^""]*)"@$1@; # Remove quotes - $c =~ s@(\d+)(?= hits?)@$h{'hits'}$1$h{'Standard'}@; - - } elsif ($c =~ m/(^New URL is: )(.*)/) { - - # New URL is: http://it.slashdot.org/article.pl?sid=07/03/04/1511210 - # XXX: Use URL highlighter - # XXX: Save? - $c = $1 . h('rewritten-URL') . $2 . h('Standard'); - - } elsif ($c =~ m/No pcrs command recognized, assuming that/) { - # No pcrs command recognized, assuming that "http://config.privoxy.org/user-manual/favicon.png"\ - # is already properly formatted. - # XXX: assume the same? - $c = highlight_matched_url($c, '(?<=assuming that \")[^"]*'); - - } else { - - found_unknown_content($c); - - } - - return $c; -} - -sub handle_loglevel_gif_deanimate ($) { - - my $content = shift; - our $t; - our %req; - our %h; - - if ($content =~ m/Success! GIF shrunk from (\d+) bytes to (\d+)\./) { - - my $bytes_from = $1; - my $bytes_to = $2; - # Gif-Deanimate: Success! GIF shrunk from 205 bytes to 133. - $content =~ s@$bytes_from@$h{'Number'}$bytes_from$h{'Standard'}@; - # XXX: Do we need g in case of ($1 == $2)? - $content =~ s@$bytes_to@$h{'Number'}$bytes_to$h{'Standard'}@; - - } elsif ($content =~ m/GIF (not) changed/) { - - # Gif-Deanimate: GIF not changed. - return '' if SUPPRESS_GIF_NOT_CHANGED; - $content =~ s@($1)@$h{'not'}$1$h{'Standard'}@; - - } elsif ($content =~ m/^failed! $gif parsing$/) { - - # failed! (gif parsing) - # XXX: Replace this error message with something less stupid - $content =~ s@(failed!)@$h{'error'}$1$h{'Standard'}@; - - } elsif ($content =~ m/^Need to de-chunk first/) { - - # Need to de-chunk first - return '' if SUPPRESS_NEED_TO_DE_CHUNK_FIRST; - - } elsif ($content =~ m/^(?:No GIF header found|failed while parsing)/) { - - # No GIF header found (XXX: Did I ever commit this?) - # failed while parsing 195 134747048 (XXX: never commited) - - # Ignore these for now - - } else { - - found_unknown_content($content); - - } - - return $content; -} - -sub handle_loglevel_request ($) { - - my $content = shift; - our $t; - our %req; - our %h; - our %reason_colours; - - if ($content =~ m/crunch! /) { - - # config.privoxy.org/send-stylesheet crunch! (CGI Call) - - # Highlight crunch reasons - foreach my $reason (keys %reason_colours) { - $content =~ s@$($reason)$@$reason_colours{$reason}($1)$h{'Standard'}@g; - } - # Highlight request URL domain and ditch 'crunch!' - $content = highlight_matched_pattern($content, 'request_', '[^ ]*(?= crunch!)'); - $content =~ s@ crunch!@@; - - } elsif ($content =~ m/\[too long, truncated\]$/) { - - # config.privoxy.org/edit-actions-submit?f=3&v=1176116716&s=7&Submit=Submit[.…... [too long, truncated] - $content = highlight_matched_pattern($content, 'request_', '^.*(?=\.\.\. \[too long, truncated\]$)'); - - } elsif ($content =~ m/(.*)/) { # XXX: Pretty stupid - - # trac.vidalia-project.net/wiki/Volunteer?format=txt - $content = h('request_') . $content . h('Standard'); - - } else { # XXX: Nop - - found_unknown_content($content); - - } - - return $content; -} - -sub handle_loglevel_crunch ($) { - - my $content = shift; - our %h; - our %reason_colours; - - # Highlight crunch reason - foreach my $reason (keys %reason_colours) { - $content =~ s@($reason)@$reason_colours{$reason}$1$h{'Standard'}@g; - } - - if ($content =~ m/\[too long, truncated\]$/) { - - # Blocked: config.privoxy.org/edit-actions-submit?f=3&v=1176116716&s=7&Submit=Submit\ - # [...]&filter... [too long, truncated] - $content = highlight_matched_pattern($content, 'request_', '^.*(?=\.\.\. \[too long, truncated\]$)'); - - } else { - - # Blocked: http://ads.example.org/ - $content = highlight_matched_pattern($content, 'request_', '(?<=: ).*'); - } - - return $content; -} - -sub handle_loglevel_connect ($) { - - my $c = shift; - our $t; - our %req; - our %h; - - if ($c =~ m/^via [^\s]+ to: [^\s]+/) { - - # Connect: via 10.0.0.1:8123 to: www.example.org.noconnect - - $c = highlight_matched_host($c, '(?<=via )[^\s]+'); - $c = highlight_matched_host($c, '(?<=to: )[^\s]+'); - - } elsif ($c =~ m/^connect to: .* failed: .*/) { - - # connect to: www.example.org.noconnect failed: Operation not permitted - - $c = highlight_matched_host($c, '(?<=connect to: )[^\s]+'); - - $c =~ s@(?<=failed: )(.*)@$h{'error'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^to ([^\s]*) successful$/) { - - # Connect: to www.nzherald.co.nz successful - - return '' if SUPPRESS_SUCCESSFUL_CONNECTIONS; - $c = highlight_matched_host($c, '(?<=to )[^\s]+'); - - } elsif ($c =~ m/^to ([^\s]*)$/) { - - # Connect: to lists.sourceforge.net:443 - - $c = highlight_matched_host($c, '(?<=to )[^\s]+'); - - } elsif ($c =~ m/^accepted connection from .*/ or - $c =~ m/^OK/) { - - # accepted connection from 10.0.0.1 - # Privoxy 3.0.6 and earlier just say: - # OK - return '' if SUPPRESS_ACCEPTED_CONNECTIONS; - $c = highlight_matched_host($c, '(?<=connection from ).*'); - - } elsif ($c =~ m/^write header to: .* failed:/) { - - # write header to: 10.0.0.1 failed: Broken pipe - - $c = highlight_matched_host($c, '(?<=write header to: )[^\s]*'); - $c =~ s@(?<=failed: )(.*)@$h{'Error'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^write header to client failed:/) { - - # write header to client failed: Broken pipe - # XXX: Stil in use? - $c =~ s@(?<=failed: )(.*)@$h{'Error'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^socks4_connect:/) { - - # socks4_connect: SOCKS request rejected or failed. - $c =~ s@(?<=socks4_connect: )(.*)@$h{'Error'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Listening for new connections/ or - $c =~ m/^accept connection/) { - # XXX: Highlight? - # Privoxy versions above 3.0.6 say: - # Listening for new connections ... - # earlier versions say: - # accept connection ... - return ''; - - } elsif ($c =~ m/^accept failed:/) { - - $c =~ s@(?<=accept failed: )(.*)@$h{'Error'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Overriding forwarding settings/) { - - # Overriding forwarding settings based on 'forward 10.0.0.1:8123' - $c =~ s@(?<=based on \')(.*)(?=\')@$h{'configuration-line'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Denying suspicious CONNECT request from/) { - - # Denying suspicious CONNECT request from 10.0.0.1 - $c = highlight_matched_host($c, '(?<=from )[^\s]+'); # XXX: not an URL - - } elsif ($c =~ m/^socks5_connect:/) { - - $c =~ s@(?<=socks5_connect: )(.*)@$h{'error'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Created new connection to/) { - - # Created new connection to www.privoxy.org:80 on socket 11. - $c = highlight_matched_host($c, '(?<=connection to )[^\s]+'); - $c =~ s@(?<=on socket )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^^Found reusable socket/) { - - # Found reusable socket 9 for www.privoxy.org:80 in slot 0. - $c =~ s@(?<=Found reusable socket )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c = highlight_matched_host($c, '(?<=for )[^\s]+'); - $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Marking open socket/) { - - # Marking open socket 9 for www.privoxy.org:80 in slot 0 as unused. - $c =~ s@(?<=Marking open socket )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c = highlight_matched_host($c, '(?<=for )[^\s]+'); - $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^No reusable/) { - - # No reusable socket for addons.mozilla.org:443 found. Opening a new one. - $c = highlight_matched_host($c, '(?<=for )[^\s]+'); - - } elsif ($c =~ m/^(Remembering|Forgetting) socket/) { - - # Remembering socket 13 for www.privoxy.org:80 in slot 0. - # Forgetting socket 38 for www.privoxy.org:80 in slot 5. - $c =~ s@(?<=socket )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c = highlight_matched_host($c, '(?<=for )[^\s]+'); - $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Socket/) { - - # Socket 16 already forgotten or never remembered. - $c =~ s@(?<=Socket )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^The connection to/) { - - # The connection to www.privoxy.org:80 in slot 6 timed out. Closing socket 19. Timeout is: 61. - # The connection to 10.0.0.1:80 in slot 0 is no longer usable. Closing socket 4. - $c = highlight_matched_host($c, '(?<=connection to )[^\s]+'); - $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=Closing socket )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=Timeout is: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Waiting for/) { - - # Waiting for 1 connections to timeout. - $c =~ s@(?<=^Waiting for )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Initialized/) { - - # Initialized 20 socket slots. - $c =~ s@(?<=Initialized )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Done reading from server/) { - - # Done reading from server. Expected content length: 24892. \ - # Actual content length: 24892. Most recently received: 4412. - $c =~ s@(?<=Expected content length: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=Actual content length: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=received: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Continuing buffering headers/) { - - # Continuing buffering headers. byte_count: 19. header_offset: 517. len: 536. - $c =~ s@(?<=byte_count: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=header_offset: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=len: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Received \d+ bytes while/) { - - # Received 206 bytes while expecting 12103. - $c =~ s@(?<=Received )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=expecting )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Connection from/) { - - # Connection from 81.163.28.218 dropped due to ACL - $c =~ s@(?<=^Connection from )((?:\d+\.?){4})@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Looks like we rea/ or - $c =~ m/^Unsetting keep-alive flag/ or - $c =~ m/^No connections to wait/) { - - # Looks like we reached the end of the last chunk. We better stop reading. - # Looks like we read the end of the last chunk together with the server \ - # headers. We better stop reading. - # Unsetting keep-alive flag. - # No connections to wait for left. - - } else { - - found_unknown_content($c); - - } - - return $c; -} - - -sub handle_loglevel_info ($) { - - my $c = shift; - our $t; - our %req; - our %h; - - if ($c =~ m/^Rewrite detected:/) { - - # Rewrite detected: GET http://10.0.0.2:88/blah.txt HTTP/1.1 - $c = highlight_matched_request_line($c, '(?<=^Rewrite detected: ).*'); - - } elsif ($c =~ m/^Decompress(ing deflated|ion didn)/ or - $c =~ m/^Compressed content detected/ or - $c =~ m/^Tagger/ - ) { - # Decompressing deflated iob: 117 - # Decompression didn't result in any content. - # Compressed content detected, content filtering disabled. Consider recompiling Privoxy\ - # with zlib support or enable the prevent-compression action. - # Tagger 'complete-url' created empty tag. Ignored. - - # Ignored for now - - } elsif ($c =~ m/^(Re)?loading configuration file /) { - - # loading configuration file '/usr/local/etc/privoxy/config': - # Reloading configuration file '/usr/local/etc/privoxy/config' - $c =~ s@(?<=loading configuration file \')([^\']*)@$h{'file'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^exiting by signal/) { - - # exiting by signal 15 .. bye - $c =~ s@(?<=exiting by signal )(\d+)@$h{'signal'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Privoxy version/) { - - # Privoxy version 3.0.7 - $c =~ s@(?<=^Privoxy version )(\d+\.\d+\.\d+)$@$h{'version'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Program name: /) { - - # Program name: /usr/local/sbin/privoxy - $c =~ s@(?<=Program name: )(.*)@$h{'program-name'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Listening on port /) { - - # Listening on port 8118 on IP address 10.0.0.1 - $c =~ s@(?<=Listening on port )(\d+)@$h{'port'}$1$h{'Standard'}@; - $c =~ s@(?<=on IP address )(.*)@$h{'ip-address'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^$Re-$Open(?:ing)? logfile/) { - - # (Re-)Open logfile /var/log/privoxy/privoxy.log - $c =~ s@(?<=Open logfile )(.*)@$h{'file'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^(Request from|Malformed server response detected)/) { - - # Request from 10.0.0.1 denied. limit-connect{,} doesn't allow CONNECT requests to port 443. - # Request from 10.0.0.1 marked for blocking. limit-connect{,} doesn't allow CONNECT requests to port 443. - # Malformed server response detected. Downgrading to HTTP/1.0 impossible. - - $c =~ s@(?<=Request from )([^\s]*)@$h{'ip-address'}$1$h{'Standard'}@; - $c =~ s@(denied|blocking)@$h{'warning'}$1$h{'Standard'}@; - $c =~ s@(CONNECT)@$h{'method'}$1$h{'Standard'}@; - $c =~ s@(?<=to port )(\d+)@$h{'port'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Status code/) { - - # Status code 304 implies no body. - $c =~ s@(?<=Status code )(\d+)@$h{'status-code'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Method/) { - - # Method HEAD implies no body. - $c =~ s@(?<=Method )([^\s]+)@$h{'method'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^Buffer limit reached while extending /) { - - # Buffer limit reached while extending the buffer (iob). Needed: 4197470. Limit: 4194304 - $c =~ s@(?<=Needed: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - $c =~ s@(?<=Limit: )(\d+)@$h{'Number'}$1$h{'Standard'}@; - - } elsif ($c =~ m/^No logfile configured/ or - $c =~ m/^Malformerd HTTP headers detected and MS IIS5 hack enabled/ or - $c =~ m/^Invalid \"chunked\" transfer/ or - $c =~ m/^Support for/ or - $c =~ m/^Flushing header and buffers/ - ) { - - # No logfile configured. Please enable it before reporting any problems. - # Malformerd HTTP headers detected and MS IIS5 hack enabled. Expect an invalid \ - # response or even no response at all. - # No logfile configured. Logging disabled. - # Invalid "chunked" transfer encoding detected and ignored. - # Support for 'Connection: keep-alive' is experimental, incomplete and\ - # known not to work properly in some situations. - # Flushing header and buffers. Stepping back from filtering. - - } else { - - found_unknown_content($c); - - } - - return $c; -} - -sub handle_loglevel_cgi ($) { - - my $c = shift; - our $t; - our %req; - our %h; - - if ($c =~ m/^Granting access to/) { - - #Granting access to http://config.privoxy.org/send-stylesheet, referrer http://p.p/ is trustworthy. - - } elsif ($c =~ m/^Substituting: s(.)/) { - - # Substituting: s/@else-not-FEATURE_ZLIB@.*@endif-FEATURE_ZLIB@//sigTU - # XXX: prone to span several lines - - my $delimiter = $1; - #$c =~ s@(?<=failed: )(.*)@$h{'error'}$1$h{'Standard'}@; - $c =~ s@(?!<=\\)($delimiter)@$h{'pcrs-delimiter'}$1$h{'Standard'}@g; # XXX: Too aggressive - #$c =~ s@(?!<=\\)($1)@$h{'pcrs-delimiter'}$1$h{'Standard'}@g; - } - - return $c; -} - -sub handle_loglevel_force ($) { - - my $c = shift; - our $t; - our %req; - our %h; - - if ($c =~ m/^Ignored force prefix in request:/) { - - # Ignored force prefix in request: "GET http://10.0.0.1/PRIVOXY-FORCE/block HTTP/1.1" - $c =~ s@^(Ignored)@$h{'ignored'}$1$h{'Standard'}@; - $c = highlight_matched_request_line($c, '(?<=request: ")[^"]*'); - - } elsif ($c =~ m/^Enforcing request:/) { - - # Enforcing request: "GET http://10.0.0.1/block HTTP/1.1". - $c = highlight_matched_request_line($c, '(?<=request: ")[^"]*'); - - } else { - - found_unknown_content($c); - - } - - return $c; -} - -sub handle_loglevel_ignore ($) { - return shift; -} - -################################################################################ -# Functions that actually print stuff -################################################################################ - -sub print_clf_message () { - - our ($ip, $timestamp, $request_line, $status_code, $size); - our %h; - my $output = ''; - - return if DEBUG_SUPPRESS_LOG_MESSAGES; - - # Rebuild highlighted - $output .= $h{'Number'} . $ip . $h{'Standard'}; - $output .= " - - "; - $output .= "[" . $h{'Timestamp'} . $timestamp . $h{'Standard'} . "]"; - $output .= " "; - $output .= "\"" . highlight_request_line("$request_line") . "\""; - $output .= " "; - $output .= $h{'Status'} . $status_code . $h{'Standard'}; - $output .= " "; - $output .= $h{'Number'} . $size . $h{'Standard'}; - $output .= get_line_end(); - - print $output; -} - -sub print_non_clf_message ($) { - - our %req; - our %thread_colours; - our %h; - our $t; - our $time_colour_index; - our @time_colours; - my $output; - my $content = shift; - my ($day, $time_stamp, $msecs, $thread, $log_level) - = ($req{$t}{'day'}, $req{$t}{'time-stamp'}, $req{$t}{'msecs'}, $t, $req{$t}{'log-level'} ); - - return if DEBUG_SUPPRESS_LOG_MESSAGES; - - $output .= $h{"Standard"} unless cli_option_is_set('html-output'); - # $output .= "$day "; - $output .= $time_colours[$time_colour_index % 2]; - - $output .= $time_stamp; - $output .= ".$msecs" unless cli_option_is_set('no-msecs'); - $output .= $h{"Standard"}; - $output .= " "; - $output .= $thread_colours{$thread} if (defined($thread_colours{$thread})); - $output .= $thread; - $output .= $h{"Standard"} . " "; - $output .= $h{$log_level} if (defined($h{$log_level})); - $output .= $log_level; - $output .= $h{"Standard"} . ": "; - $output .= "$content"; - $output .= get_line_end(); - - print $output; -} - -sub parse_loop () { - - our $t; - our %req; # request data from previous lines - our %h; - our %thread_colours; - our @all_colours; - our @time_colours; - our $thread_colour_index = 0; - our $header_colour_index = 0; - our $time_colour_index = 0; - - my ($day, $time_stamp, $thread, $log_level, $content, $c, $msecs); - my $last_msecs = 0; - my $last_thread = 0; - my $last_timestamp = 0; - my $output; - my $filters_that_did_nothing; - my $key; - my $time_colour; - our $no_special_header_highlighting; - $time_colour = paint_it('white'); - my %log_level_count; - - my %log_level_handlers = ( - 'Re-Filter' => \&handle_loglevel_re_filter, - 'Header' => \&handle_loglevel_header, - 'Connect' => \&handle_loglevel_connect, - 'Redirect' => \&handle_loglevel_redirect, - 'Request' => \&handle_loglevel_request, - 'Crunch' => \&handle_loglevel_crunch, - 'Gif-Deanimate' => \&handle_loglevel_gif_deanimate, - 'Info' => \&handle_loglevel_info, - 'CGI' => \&handle_loglevel_cgi, - 'Force' => \&handle_loglevel_force, - 'Error' => \&handle_loglevel_ignore, - 'Fatal error' => \&handle_loglevel_ignore, - 'Writing' => \&handle_loglevel_ignore, - ); - - while (<>) { - - $output = ''; - - if (m/^(\w{3} \d{2}) (\d\d:\d\d:\d\d)\.?(\d+)? (?:Privoxy$)?([^$\s]*)[\)]? ([\w -]*): (.*)$/) { - # XXX: Put in req hash? - $day = $1; - $time_stamp = $2; - $msecs = $3 ? $3 : 0; # Only the cool kids have micro second resolution - $log_level = $5; - $content = $c = $6; - $thread = $t = $4; - - $req{$t}{'day'} = $day; - $req{$t}{'time-stamp'} = $time_stamp; - $req{$t}{'msecs'} = $msecs; # Only the cool kids have micro second resolution; - $req{$t}{'log-level'} = $log_level; - $req{$t}{'content'} = $content; - $req{$t}{'log-message'} = $_; - $no_special_header_highlighting = 0; - - $log_level_count{$log_level}++; - - if (defined($log_level_handlers{$log_level})) { - - $content = $log_level_handlers{$log_level}($content); - - } else { - - die "No handler found for log level \"$log_level\"\n"; - - } - - # Highlight Truncations - if (m/\.\.\. \[(too long, truncated)/) { - $content =~ s@($1)@$h{'Truncation'}$1$h{'Standard'}@g; - } - - next unless $content; - - # Register threads to keep the colour constant - if (!defined($thread_colours{$thread})) { - $thread_colours{$thread} = $all_colours[$thread_colour_index % @all_colours]; - $thread_colour_index++; - } - - # Switch timestamp colour if timestamps differ - if ($msecs != $last_msecs || !($time_stamp =~ m/$last_timestamp/)) { - debug_message("Tick tack!") if DEBUG_TICKS; - $time_colour = $time_colours[$time_colour_index % 2]; - $time_colour_index++ - } - - $last_msecs = $msecs; - $last_thread = $thread; - $last_timestamp = $time_stamp; - - print_non_clf_message($content); - - } elsif (m/^(\d+\.\d+\.\d+\.\d+) - - \[(.*)\] "(.*)" (\d+) (\d+)/) { - - # LOG_LEVEL_CLF lines look like this - # 61.152.239.32 - - [04/Mar/2007:18:28:23 +0100] "GET \ - # http://ad.yieldmanager.com/imp?z=1&Z=120x600&s=109339&u=http%3A%2F%2Fwww.36… - # HTTP/1.1" 403 1730 - our ($ip, $timestamp, $request_line, $status_code, $size) = ($1, $2, $3, $4, $5); - - print_clf_message(); - - } else { - - # Some Privoxy log messages span more than one line, - # usually to dump lots of content that doesn't need any syntax highlighting. - # XXX: add mechanism to forward these lines to the right handler anyway. - chomp(); - unless (DEBUG_SUPPRESS_LOG_MESSAGES or (SUPPRESS_EMPTY_LINES and m/^\s+$/)) { - print and print get_line_end(); # unless (SUPPRESS_EMPTY_LINES and m/^\s+$/); - } - } - } - - if (cli_option_is_set('statistic')) { - foreach (keys %log_level_count) { - print $_ . ": " . $log_level_count{$_} . " "; - } - } -} - -sub VersionMessage { - my $version_message; - - $version_message .= 'Privoxy-Log-Parser ' . PRIVOXY_LOG_PARSER_VERSION . "\n"; - $version_message .= 'Copyright (C) 2007-2009 Fabian Keil <fk(a)fabiankeil.de>' . "\n"; - $version_message .= 'http://www.fabiankeil.de/sourcecode/privoxy-log-parser/' . "\n"; - - print $version_message; -} - -sub get_cli_options () { - - our %cli_options = ( - 'html-output' => CLI_OPTION_DEFAULT_TO_HTML_OUTPUT, - 'title' => CLI_OPTION_TITLE, - 'no-syntax-highlighting' => CLI_OPTION_NO_SYNTAX_HIGHLIGHTING, - 'no-embedded-css' => CLI_OPTION_NO_EMBEDDED_CSS, - 'no-msecs' => CLI_OPTION_NO_MSECS, - 'show-ineffective-filters' => CLI_OPTION_SHOW_INEFFECTIVE_FILTERS, - 'accept-unknown-messages' => CLI_OPTION_ACCEPT_UNKNOWN_MESSAGES, - 'statistic' => CLI_OPTION_STATISTIC, - ); - - GetOptions ( - 'html-output' => \$cli_options{'html-output'}, - 'title' => \$cli_options{'title'}, - 'no-syntax-highlighting' => \$cli_options{'no-syntax-highlighting'}, - 'no-embedded-css' => \$cli_options{'no-embedded-css'}, - 'no-msecs' => \$cli_options{'no-msecs'}, - 'show-ineffective-filters' => \$cli_options{'show-ineffective-filters'}, - 'accept-unknown-messages' => \$cli_options{'accept-unknown-messages'}, - 'statistic' => \$cli_options{'statistic'}, - 'version' => sub { VersionMessage && exit(0) } - ); -} - - - -################################################################################ -# main -################################################################################ -sub main () { - - get_cli_options(); - set_background(DEFAULT_BACKGROUND); - prepare_our_stuff(); - - print_intro(); - - parse_loop(); - - print_outro(); -} - -main(); - -=head1 NAME - -B<privoxy-log-parser> - A parser and syntax-highlighter for Privoxy log messages - -=head1 SYNOPSIS - -B<privoxy-log-parser> [B<--accept-unknown-messages>] [B<--html-output>] -[B<--no-msecs>] [B<--no-syntax-higlighting>] [B<--show-ineffective-filters>] -[B<--version>] - -=head1 DESCRIPTION - -B<privoxy-log-parser> reads Privoxy log messages and - -- syntax-highlights recognized lines, - -- reformats some of them for easier comprehension, - -- filters out less useful messages, and - -- (in some cases) calculates additional information, - like the compression ratio or how a filter affected - the content size. - -With B<privoxy-log-parser> you should be able to increase Privoxy's log level -without getting confused by the resulting amount of output. For example for -"debug 64" B<privoxy-log-parser> will (by default) only show messages that -affect the content. If a filter doesn't cause any hits, B<privoxy-log-parser> -will hide the "filter foo caused 0 hits" message. - -=head1 OPTIONS - -[B<--accept-unknown-messages>] Don't print warnings in case of unknown messages, -just don't highlight them. - -[B<--html-output>] Use HTML and CSS for the syntax highlighting. If this option is -omitted, ANSI escape sequences are used unless B<--no-syntax-highlighting> is active. -This option is only intended to make embedding log excerpts in web pages easier. -It does not excape any input! - -[B<--no-msecs>] Don't expect milisecond resolution - -[B<--no-syntax-highlighting>] Disable syntax-highlighting. Useful when -the filtered output is piped into less in which case the ANSI control -codes don't work, or if the terminal itself doesn't support the control -codes. - -[B<--show-ineffective-filters>] Don't suppress log lines for filters -that didn't modify the content. - -[B<--version>] Print version and exit. - -=head1 EXAMPLES - -To monitor a log file: - -tail -F /usr/jails/privoxy-jail/var/log/privoxy/privoxy.log | B<privoxy-log-parser> - -Replace '-F' with '-f' if your tail implementation lacks '-F' support -or if the log won't get rotated anyway. The log file location depends -on your system (Doh!). - -To monitor Privoxy without having it write to a log file: - -privoxy --no-daemon /usr/jails/privoxy-jail/usr/local/etc/privoxy/config 2>&1 | B<privoxy-log-parser> - -Again, the config file location depends on your system. Output redirection -depends on your shell, the above works with bourne shells. - -To read a processed Privoxy log file from top to bottom, letting the content -scroll by slightly faster than you can read: - -B<privoxy-log-parser> < /usr/jails/privoxy-jail/var/log/privoxy/privoxy.log - -This is probably only useful to fill screens in the background of haxor movies. - -=head1 CAVEATS - -Syntax highlighting with ANSI escape sequences will look strange -if your background color isn't black. - -Some messages aren't recognized yet and will not be fully highlighted. - -B<privoxy-log-parser> is developed with Privoxy 3.0.7 or later in mind, -using earlier Privoxy versions will probably result in an increased amount -of unrecognized log lines. - -Privoxy's log files tend to be rather large. If you use HTML -highlighting some browsers can't handle them, get confused and -will eventually crash because of segmentation faults or unexpected -exceptions. This is a problem in the browser and not B<privoxy-log-parser>'s -fault. - -=head1 BUGS - -Many settings can't be controlled through command line options yet. - -=head1 SEE ALSO - -privoxy(1) - -=head1 AUTHOR - -Fabian Keil <fk(a)fabiankeil.de> - -=cut diff --git a/external/privoxy/tools/privoxy-regression-test.pl b/external/privoxy/tools/privoxy-regression-test.pl deleted file mode 100755 index c7269b7..0000000 --- a/external/privoxy/tools/privoxy-regression-test.pl +++ /dev/null @@ -1,1754 +0,0 @@ -#!/usr/bin/perl - -############################################################################ -# -# Privoxy-Regression-Test -# -# A regression test "framework" for Privoxy. For documentation see: -# perldoc privoxy-regression-test.pl -# -# $Id: privoxy-regression-test.pl,v 1.34 2009/02/27 18:35:22 fabiankeil Exp $ -# -# Wish list: -# -# - Update documentation -# - Validate HTTP times. -# - Implement a HTTP_VERSION directive or allow to -# specify whole request lines. -# - Support filter regression tests. -# - Document magic Expect Header values -# - Internal fuzz support? -# -# Copyright (c) 2007-2009 Fabian Keil <fk(a)fabiankeil.de> -# -# Permission to use, copy, modify, and distribute this software for any -# purpose with or without fee is hereby granted, provided that the above -# copyright notice and this permission notice appear in all copies. -# -# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -# -############################################################################ - -use warnings; -use strict; -use Getopt::Long; - -use constant { - PRT_VERSION => 'Privoxy-Regression-Test 0.3', - - CURL => 'curl', - - # CLI option defaults - CLI_RETRIES => 1, - CLI_LOOPS => 1, - CLI_MAX_TIME => 5, - CLI_MIN_LEVEL => 0, - # XXX: why limit at all? - CLI_MAX_LEVEL => 100, - CLI_FORKS => 0, - - PRIVOXY_CGI_URL => 'http://p.p/', - FELLATIO_URL => 'http://127.0.0.1:8080/', - LEADING_LOG_DATE => 1, - LEADING_LOG_TIME => 1, - - DEBUG_LEVEL_FILE_LOADING => 0, - DEBUG_LEVEL_PAGE_FETCHING => 0, - DEBUG_LEVEL_VERBOSE_FAILURE => 1, - # XXX: Only partly implemented and mostly useless. - DEBUG_LEVEL_VERBOSE_SUCCESS => 0, - DEBUG_LEVEL_STATUS => 1, - - VERBOSE_TEST_DESCRIPTION => 1, - - # Internal use, don't modify - # Available debug bits: - LL_ERROR => 1, - LL_VERBOSE_FAILURE => 2, - LL_PAGE_FETCHING => 4, - LL_FILE_LOADING => 8, - LL_VERBOSE_SUCCESS => 16, - LL_STATUS => 32, - LL_SOFT_ERROR => 64, - - CLIENT_HEADER_TEST => 1, - SERVER_HEADER_TEST => 2, - DUMB_FETCH_TEST => 3, - METHOD_TEST => 4, - STICKY_ACTIONS_TEST => 5, - TRUSTED_CGI_REQUEST => 6, - BLOCK_TEST => 7, -}; - -sub init_our_variables () { - - our $leading_log_time = LEADING_LOG_TIME; - our $leading_log_date = LEADING_LOG_DATE; - - our $privoxy_cgi_url = PRIVOXY_CGI_URL; - - our $verbose_test_description = VERBOSE_TEST_DESCRIPTION; - - our $log_level = get_default_log_level(); - -} - -sub get_default_log_level () { - - my $log_level = 0; - - $log_level |= LL_FILE_LOADING if DEBUG_LEVEL_FILE_LOADING; - $log_level |= LL_PAGE_FETCHING if DEBUG_LEVEL_PAGE_FETCHING; - $log_level |= LL_VERBOSE_FAILURE if DEBUG_LEVEL_VERBOSE_FAILURE; - $log_level |= LL_VERBOSE_SUCCESS if DEBUG_LEVEL_VERBOSE_SUCCESS; - $log_level |= LL_STATUS if DEBUG_LEVEL_STATUS; - - # These are intended to be always on. - $log_level |= LL_SOFT_ERROR; - $log_level |= LL_ERROR; - - return $log_level; -} - -############################################################################ -# -# File loading functions -# -############################################################################ - -sub parse_tag ($) { - - my $tag = shift; - - # Remove anchors - $tag =~ s@[\$\^]@@g; - # Unescape brackets and dots - $tag =~ s@\\(?=[{}().+])@@g; - - # log_message("Parsed tag: " . $tag); - - check_for_forbidden_characters($tag); - - return $tag; -} - -sub check_for_forbidden_characters ($) { - - my $tag = shift; # XXX: also used to check values though. - my $allowed = '[-=\dA-Za-z~{}:.\/();\s,+@"_%\?&*^]'; - - unless ($tag =~ m/^$allowed*$/) { - my $forbidden = $tag; - $forbidden =~ s@^$allowed*(.).*@$1@; - - l(LL_ERROR, "'" . $tag . "' contains character '" . $forbidden. "' which is unacceptable."); - } -} - -sub load_regressions_tests () { - - our $privoxy_cgi_url; - our @privoxy_config; - our %privoxy_features; - my @actionfiles; - my $curl_url = ''; - my $file_number = 0; - my $feature; - - $curl_url .= $privoxy_cgi_url; - $curl_url .= 'show-status'; - - l(LL_STATUS, "Asking Privoxy for the number of action files available ..."); - - foreach (@{get_cgi_page_or_else($curl_url)}) { - - chomp; - if (/<td>(.*?)<\/td><td class=\"buttons\"><a href=\"\/show-status\?file=actions&index=(\d+)\">/) { - - my $url = $privoxy_cgi_url . 'show-status?file=actions&index=' . $2; - $actionfiles[$file_number++] = $url; - - } elsif (m(a)config\.html#.*\">([^<]*)</a>\s+(.*)<br>@) { - - my $directive = $1 . " " . $2; - push (@privoxy_config, $directive); - - } elsif (m@<td><code>([^<]*)</code></td>@) { - - $feature = $1; - - } elsif (m@<td> (Yes|No) </td>@) { - - $privoxy_features{$feature} = $1 if defined $feature; - $feature = undef; - } - } - - l(LL_FILE_LOADING, "Recognized " . @actionfiles . " actions files"); - - load_action_files(\@actionfiles); -} - -sub token_starts_new_test ($) { - - my $token = shift; - my @new_test_directives = ('set header', 'fetch test', - 'trusted cgi request', 'request header', 'method test', - 'blocked url', 'url'); - - foreach my $new_test_directive (@new_test_directives) { - return 1 if $new_test_directive eq $token; - } - - return 0; -} - -sub tokenize ($) { - - my ($token, $value) = (undef, undef); - - # Remove leading and trailing white space. - s@^\s*@@; - s@\s*$@@; - - # Reverse HTML-encoding - # XXX: Seriously imcomplete. - s@"@"@g; - s@&@&@g; - - # Tokenize - if (/^\#\s*([^=:]*?)\s*[=]\s*(.+?)\s*$/) { - - $token = $1; - $value = $2; - - $token =~ s@\s\s+@ @g; - $token =~ tr/[A-Z]/[a-z]/; - - } elsif (/^TAG\s*:(.*)$/) { - - $token = 'tag'; - $value = $1; - } - - return ($token, $value); -} - -sub enlist_new_test ($$$$$$) { - - my ($regression_tests, $token, $value, $si, $ri, $number) = @_; - my $type; - - if ($token eq 'set header') { - - l(LL_FILE_LOADING, "Header to set: " . $value); - $type = CLIENT_HEADER_TEST; - - } elsif ($token eq 'request header') { - - l(LL_FILE_LOADING, "Header to request: " . $value); - $type = SERVER_HEADER_TEST; - $$regression_tests[$si][$ri]{'expected-status-code'} = 200; - - } elsif ($token eq 'trusted cgi request') { - - l(LL_FILE_LOADING, "CGI URL to test in a dumb way: " . $value); - $type = TRUSTED_CGI_REQUEST; - $$regression_tests[$si][$ri]{'expected-status-code'} = 200; - - } elsif ($token eq 'fetch test') { - - l(LL_FILE_LOADING, "URL to test in a dumb way: " . $value); - $type = DUMB_FETCH_TEST; - $$regression_tests[$si][$ri]{'expected-status-code'} = 200; - - } elsif ($token eq 'method test') { - - l(LL_FILE_LOADING, "Method to test: " . $value); - $type = METHOD_TEST; - $$regression_tests[$si][$ri]{'expected-status-code'} = 200; - - } elsif ($token eq 'blocked url') { - - l(LL_FILE_LOADING, "URL to block-test: " . $value); - $type = BLOCK_TEST; - - } elsif ($token eq 'url') { - - l(LL_FILE_LOADING, "Sticky URL to test: " . $value); - $type = STICKY_ACTIONS_TEST; - - } else { - - die "Incomplete '" . $token . "' support detected."; - } - - $$regression_tests[$si][$ri]{'type'} = $type; - $$regression_tests[$si][$ri]{'level'} = $type; - - check_for_forbidden_characters($value); - - $$regression_tests[$si][$ri]{'data'} = $value; - - # For function that only get passed single tests - $$regression_tests[$si][$ri]{'section-id'} = $si; - $$regression_tests[$si][$ri]{'regression-test-id'} = $ri; - $$regression_tests[$si][$ri]{'number'} = $number - 1; - l(LL_FILE_LOADING, - "Regression test " . $number . " (section:" . $si . "):"); -} - -sub load_action_files ($) { - - # initialized here - our %actions; - our @regression_tests; - - my $actionfiles_ref = shift; - my @actionfiles = @{$actionfiles_ref}; - - my $si = 0; # Section index - my $ri = -1; # Regression test index - my $count = 0; - - my $ignored = 0; - - l(LL_STATUS, "Gathering regression tests from " . - @actionfiles . " action file(s) delivered by Privoxy."); - - for my $file_number (0 .. @actionfiles - 1) { - - my $curl_url = ' "' . $actionfiles[$file_number] . '"'; - my $actionfile = undef; - my $sticky_actions = undef; - - foreach (@{get_cgi_page_or_else($curl_url)}) { - - my $no_checks = 0; - chomp; - - if (/<h2>Contents of Actions File (.*?)</) { - $actionfile = $1; - next; - } - next unless defined $actionfile; - - last if (/<\/pre>/); - - my ($token, $value) = tokenize($_); - - next unless defined $token; - - # Load regression tests - - if (token_starts_new_test($token)) { - - # Beginning of new regression test. - $ri++; - $count++; - enlist_new_test(\@regression_tests, $token, $value, $si, $ri, $count); - } - - if ($token =~ /level\s+(\d+)/i) { - - my $level = $1; - register_dependency($level, $value); - } - - if ($token eq 'sticky actions') { - - # Will be used by each following Sticky URL. - $sticky_actions = $value; - if ($sticky_actions =~ /{[^}]*\s/) { - l(LL_ERROR, - "'Sticky Actions' with whitespace inside the " . - "action parameters are currently unsupported."); - } - } - - if ($si == -1 || $ri == -1) { - # No beginning of a test detected yet, - # so we don't care about any other test - # attributes. - next; - } - - if ($token eq 'expect header') { - - l(LL_FILE_LOADING, "Detected expectation: " . $value); - $regression_tests[$si][$ri]{'expect-header'} = $value; - - } elsif ($token eq 'tag') { - - next if ($ri == -1); - - my $tag = parse_tag($value); - - # We already checked in parse_tag() after filtering - $no_checks = 1; - - l(LL_FILE_LOADING, "Detected TAG: " . $tag); - - # Save tag for all tests in this section - do { - $regression_tests[$si][$ri]{'tag'} = $tag; - } while ($ri-- > 0); - - $si++; - $ri = -1; - - } elsif ($token eq 'ignore' && $value =~ /Yes/i) { - - l(LL_FILE_LOADING, "Ignoring section: " . test_content_as_string($regression_tests[$si][$ri])); - $regression_tests[$si][$ri]{'ignore'} = 1; - $ignored++; - - } elsif ($token eq 'expect status code') { - - l(LL_FILE_LOADING, "Expecting status code: " . $value); - $regression_tests[$si][$ri]{'expected-status-code'} = $value; - - } elsif ($token eq 'level') { # XXX: stupid name - - $value =~ s@(\d+).*@$1@; - l(LL_FILE_LOADING, "Level: " . $value); - $regression_tests[$si][$ri]{'level'} = $value; - - } elsif ($token eq 'method') { - - l(LL_FILE_LOADING, "Method: " . $value); - $regression_tests[$si][$ri]{'method'} = $value; - - } elsif ($token eq 'url') { - - if (defined $sticky_actions) { - die "WTF? Attempted to overwrite Sticky Actions" - if defined ($regression_tests[$si][$ri]{'sticky-actions'}); - - l(LL_FILE_LOADING, "Sticky actions: " . $sticky_actions); - $regression_tests[$si][$ri]{'sticky-actions'} = $sticky_actions; - } else { - l(LL_ERROR, "Sticky URL without Sticky Actions: $value"); - } - - } else { - - # We don't use it, so we don't need - $no_checks = 1; - } - # XXX: Neccessary? - check_for_forbidden_characters($value) unless $no_checks; - check_for_forbidden_characters($token); - } - } - - l(LL_FILE_LOADING, "Done loading " . $count . " regression tests." - . " Of which " . $ignored. " will be ignored)\n"); -} - -############################################################################ -# -# Regression test executing functions -# -############################################################################ - -sub execute_regression_tests () { - - our @regression_tests; - my $loops = get_cli_option('loops'); - my $all_tests = 0; - my $all_failures = 0; - my $all_successes = 0; - - unless (@regression_tests) { - - l(LL_STATUS, "No regression tests found."); - return; - } - - l(LL_STATUS, "Executing regression tests ..."); - - while ($loops-- > 0) { - - my $successes = 0; - my $tests = 0; - my $failures; - my $skipped = 0; - - for my $s (0 .. @regression_tests - 1) { - - my $r = 0; - - while (defined $regression_tests[$s][$r]) { - - die "Section id mismatch" if ($s != $regression_tests[$s][$r]{'section-id'}); - die "Regression test id mismatch" if ($r != $regression_tests[$s][$r]{'regression-test-id'}); - - my $number = $regression_tests[$s][$r]{'number'}; - my $skip_reason = undef; - - if ($regression_tests[$s][$r]{'ignore'}) { - - $skip_reason = "Ignore flag is set"; - - } elsif (cli_option_is_set('test-number') - and get_cli_option('test-number') != $number) { - - $skip_reason = "Only executing test " . get_cli_option('test-number'); - - } else { - - $skip_reason = level_is_unacceptable($regression_tests[$s][$r]{'level'}); - } - - if (defined $skip_reason) { - - my $message = "Skipping test " . $number . ": " . $skip_reason . "."; - log_message($message) if (cli_option_is_set('verbose') or - cli_option_is_set('show-skipped-tests')); - $skipped++; - - } else { - - my $result = execute_regression_test($regression_tests[$s][$r]); - - log_result($regression_tests[$s][$r], $result, $tests); - - $successes += $result; - $tests++; - } - $r++; - } - } - $failures = $tests - $successes; - - log_message("Executed " . $tests . " regression tests. " . - 'Skipped ' . $skipped . '. ' . - $successes . " successes, " . $failures . " failures."); - - $all_tests += $tests; - $all_failures += $failures; - $all_successes += $successes; - - } - - if (get_cli_option('loops') > 1) { - log_message("Total: Executed " . $all_tests . " regression tests. " . - $all_successes . " successes, " . $all_failures . " failures."); - } -} - -sub level_is_unacceptable ($) { - my $level = shift; - my $min_level = get_cli_option('min-level'); - my $max_level = get_cli_option('max-level'); - my $required_level = cli_option_is_set('level') ? - get_cli_option('level') : $level; - my $reason = undef; - - if ($required_level != $level) { - - $reason = "Level doesn't match (" . $level . - " != " . $required_level . ")" - - } elsif ($level < $min_level) { - - $reason = "Level to low (" . $level . " < " . $min_level . ")"; - - } elsif ($level > $max_level) { - - $reason = "Level to high (" . $level . " > " . $max_level . ")"; - - } else { - - $reason = dependency_unsatisfied($level); - } - - return $reason; -} - -sub dependency_unsatisfied ($) { - - my $level = shift; - our %dependencies; - our @privoxy_config; - our %privoxy_features; - - my $dependency_problem = undef; - - if (defined ($dependencies{$level}{'config line'})) { - - my $dependency = $dependencies{$level}{'config line'}; - $dependency_problem = "depends on config line matching: '" . $dependency . "'"; - - foreach (@privoxy_config) { - - $dependency_problem = undef if (/$dependency/); - last; # XXX: this looks ... interesting. - } - - } elsif (defined ($dependencies{$level}{'feature status'})) { - - my $dependency = $dependencies{$level}{'feature status'}; - my ($feature, $status) = $dependency =~ /([^\s]*)\s+(Yes|No)/; - - unless (defined($privoxy_features{$feature}) - and ($privoxy_features{$feature} eq $status)) - { - $dependency_problem = "depends on '" . $feature . - "' being set to '" . $status . "'"; - } - } - - return $dependency_problem; -} - -sub register_dependency ($$) { - - my $level = shift; - my $dependency = shift; - our %dependencies; - - if ($dependency =~ /config line\s+(.*)/) { - - $dependencies{$level}{'config line'} = $1; - - } elsif ($dependency =~ /feature status\s+(.*)/) { - - $dependencies{$level}{'feature status'} = $1; - - } -} - -# XXX: somewhat misleading name -sub execute_regression_test ($) { - - my $test_ref = shift; - my %test = %{$test_ref}; - my $result = 0; - - if ($test{'type'} == CLIENT_HEADER_TEST) { - - $result = execute_client_header_regression_test($test_ref); - - } elsif ($test{'type'} == SERVER_HEADER_TEST) { - - $result = execute_server_header_regression_test($test_ref); - - } elsif ($test{'type'} == DUMB_FETCH_TEST - or $test{'type'} == TRUSTED_CGI_REQUEST) { - - $result = execute_dumb_fetch_test($test_ref); - - } elsif ($test{'type'} == METHOD_TEST) { - - $result = execute_method_test($test_ref); - - } elsif ($test{'type'} == BLOCK_TEST) { - - $result = execute_block_test($test_ref); - - } elsif ($test{'type'} == STICKY_ACTIONS_TEST) { - - $result = execute_sticky_actions_test($test_ref); - - } else { - - die "Unsupported test type detected: " . $test{'type'}; - } - - return $result; -} - -sub execute_method_test ($) { - - my $test_ref = shift; - my %test = %{$test_ref}; - my $buffer_ref; - my $status_code; - my $method = $test{'data'}; - - my $curl_parameters = ''; - my $expected_status_code = $test{'expected-status-code'}; - - $curl_parameters .= '--request ' . $method . ' '; - # Don't complain about the 'missing' body - $curl_parameters .= '--head ' if ($method =~ /^HEAD$/i); - - $curl_parameters .= PRIVOXY_CGI_URL; - - $buffer_ref = get_page_with_curl($curl_parameters); - $status_code = get_status_code($buffer_ref); - - return check_status_code_result($status_code, $expected_status_code); -} - -sub execute_dumb_fetch_test ($) { - - my $test_ref = shift; - my %test = %{$test_ref}; - my $buffer_ref; - my $status_code; - - my $curl_parameters = ''; - my $expected_status_code = $test{'expected-status-code'}; - - if (defined $test{method}) { - $curl_parameters .= '--request ' . $test{method} . ' '; - } - if ($test{type} == TRUSTED_CGI_REQUEST) { - $curl_parameters .= '--referer ' . PRIVOXY_CGI_URL . ' '; - } - - $curl_parameters .= $test{'data'}; - - $buffer_ref = get_page_with_curl($curl_parameters); - $status_code = get_status_code($buffer_ref); - - return check_status_code_result($status_code, $expected_status_code); -} - -sub execute_block_test ($) { - - my $test = shift; - my $url = $test->{'data'}; - my $final_results = get_final_results($url); - - return defined $final_results->{'+block'}; -} - -sub execute_sticky_actions_test ($) { - - my $test = shift; - my $url = $test->{'data'}; - my $verified_actions = 0; - # XXX: splitting currently doesn't work for actions whose parameters contain spaces. - my @sticky_actions = split(/\s+/, $test->{'sticky-actions'}); - my $final_results = get_final_results($url); - - foreach my $sticky_action (@sticky_actions) { - if (defined $final_results->{$sticky_action}) { - # Exact match - $verified_actions++; - }elsif ($sticky_action =~ /-.*\{/ and - not defined $final_results->{$sticky_action}) { - # Disabled multi actions aren't explicitly listed as - # disabled and thus have to be checked by verifying - # that they aren't enabled. - $verified_actions++; - } else { - l(LL_VERBOSE_FAILURE, - "Ooops. '$sticky_action' is not among the final results."); - } - } - - return $verified_actions == @sticky_actions; -} - -sub get_final_results ($) { - - my $url = shift; - my $curl_parameters = ''; - my %final_results = (); - my $final_results_reached = 0; - - die "Unacceptable characters in $url" if $url =~ m@[\\'"]@; - # XXX: should be URL-encoded properly - $url =~ s@%@%25@g; - $url =~ s@\s@%20@g; - $url =~ s@&@%26@g; - $url =~ s@:@%3A@g; - $url =~ s@/@%2F@g; - - $curl_parameters .= quote(PRIVOXY_CGI_URL . 'show-url-info?url=' . $url); - - foreach (@{get_cgi_page_or_else($curl_parameters)}) { - - $final_results_reached = 1 if (m@<h2>Final results:</h2>@); - - next unless ($final_results_reached); - last if (m@</td>@); - - if (m@<br>([-+])<a.*>([^>]*)</a>(?: (\{.*\}))?@) { - my $action = $1.$2; - my $parameter = $3; - - if (defined $parameter) { - # In case the caller needs to check - # the action and its parameter - $final_results{$action . $parameter} = 1; - } - # In case the action doesn't have parameters - # or the caller doesn't care for the parameter. - $final_results{$action} = 1; - } - } - - return \%final_results; -} - -sub check_status_code_result ($$) { - - my $status_code = shift; - my $expected_status_code = shift; - my $result = 0; - - unless (defined $status_code) { - - # XXX: should probably be caught earlier. - l(LL_VERBOSE_FAILURE, - "Ooops. We expected status code " . $expected_status_code . ", but didn't get any status code at all."); - - } elsif ($expected_status_code == $status_code) { - - $result = 1; - l(LL_VERBOSE_SUCCESS, - "Yay. We expected status code " . $expected_status_code . ", and received: " . $status_code . '.'); - - } elsif (cli_option_is_set('fuzzer-feeding') and $status_code == 123) { - - l(LL_VERBOSE_FAILURE, - "Oh well. Status code lost while fuzzing. Can't check if it was " . $expected_status_code . '.'); - - } else { - - l(LL_VERBOSE_FAILURE, - "Ooops. We expected status code " . $expected_status_code . ", but received: " . $status_code . '.'); - } - - return $result; -} - -sub execute_client_header_regression_test ($) { - - my $test_ref = shift; - my $buffer_ref; - my $header; - - $buffer_ref = get_show_request_with_curl($test_ref); - - $header = get_header($buffer_ref, $test_ref); - - return check_header_result($test_ref, $header); -} - -sub execute_server_header_regression_test ($) { - - my $test_ref = shift; - my $buffer_ref; - my $header; - - $buffer_ref = get_head_with_curl($test_ref); - - $header = get_server_header($buffer_ref, $test_ref); - - return check_header_result($test_ref, $header); -} - -sub interpret_result ($) { - my $success = shift; - return $success ? "Success" : "Failure"; -} - -sub check_header_result ($$) { - - my $test_ref = shift; - my $header = shift; - - my %test = %{$test_ref}; - my $expect_header = $test{'expect-header'}; - my $success = 0; - - if ($expect_header eq 'NO CHANGE') { - - if (defined($header) and $header eq $test{'data'}) { - - $success = 1; - - } else { - - $header = "REMOVAL" unless defined $header; - l(LL_VERBOSE_FAILURE, - "Ooops. Got: " . $header . " while expecting: " . $expect_header); - } - - } elsif ($expect_header eq 'REMOVAL') { - - if (defined($header) and $header eq $test{'data'}) { - - l(LL_VERBOSE_FAILURE, - "Ooops. Expected removal but: " . $header . " is still there."); - - } else { - - # XXX: Use more reliable check here and make sure - # the header has a different name. - $success = 1; - } - - } elsif ($expect_header eq 'SOME CHANGE') { - - if (defined($header) and not $header eq $test{'data'}) { - - $success = 1; - - } else { - - $header = "REMOVAL" unless defined $header; - l(LL_VERBOSE_FAILURE, - "Ooops. Got: " . $header . " while expecting: SOME CHANGE"); - } - - - } else { - - if (defined($header) and $header eq $expect_header) { - - $success = 1; - - } else { - - $header = "'No matching header'" unless defined $header; # XXX: No header detected to be precise - l(LL_VERBOSE_FAILURE, - "Ooops. Got: " . $header . " while expecting: " . $expect_header); - } - } - return $success; -} - -sub get_header_name ($) { - - my $header = shift; - - $header =~ s(a)(.*?: ).*@$1@; - - return $header; -} - -sub get_header ($$) { - - our $filtered_request = ''; - - my $buffer_ref = shift; - my $test_ref = shift; - - my %test = %{$test_ref}; - my @buffer = @{$buffer_ref}; - - my $expect_header = $test{'expect-header'}; - - die "get_header called with no expect header" unless defined $expect_header; - - my $line; - my $processed_request_reached = 0; - my $read_header = 0; - my $processed_request = ''; - my $header; - my $header_to_get; - - if ($expect_header eq 'REMOVAL' - or $expect_header eq 'NO CHANGE' - or $expect_header eq 'SOME CHANGE') { - - $expect_header = $test{'data'}; - - } - - $header_to_get = get_header_name($expect_header); - - foreach (@buffer) { - - # Skip everything before the Processed request - if (/Processed Request/) { - $processed_request_reached = 1; - next; - } - next unless $processed_request_reached; - - # End loop after the Processed request - last if (/<\/pre>/); - - # Ditch tags and leading/trailing white space. - s@^\s*<.*?>@@g; - s@\s*$@@g; - - # Decode characters we care about. - s@"@"@g; - - $filtered_request .= "\n" . $_; - - if (/^$header_to_get/) { - $read_header = 1; - $header = $_; - last; - } - } - - return $header; -} - -sub get_server_header ($$) { - - my $buffer_ref = shift; - my $test_ref = shift; - - my %test = %{$test_ref}; - my @buffer = @{$buffer_ref}; - - my $expect_header = $test{'expect-header'}; - my $header; - my $header_to_get; - - # XXX: Should be caught before starting to test. - l(LL_ERROR, "No expect header for test " . $test{'number'}) - unless defined $expect_header; - - if ($expect_header eq 'REMOVAL' - or $expect_header eq 'NO CHANGE' - or $expect_header eq 'SOME CHANGE') { - - $expect_header = $test{'data'}; - } - - $header_to_get = get_header_name($expect_header); - - foreach (@buffer) { - - # XXX: should probably verify that the request - # was actually answered by Fellatio. - if (/^$header_to_get/) { - $header = $_; - $header =~ s@\s*$@@g; - last; - } - } - - return $header; -} - -sub get_status_code ($) { - - my $buffer_ref = shift; - my @buffer = @{$buffer_ref}; - - foreach (@buffer) { - - if (/^HTTP\/\d\.\d (\d{3})/) { - - return $1; - - } else { - - return '123' if cli_option_is_set('fuzzer-feeding'); - chomp; - l(LL_ERROR, 'Unexpected buffer line: "' . $_ . '"'); - } - } -} - -sub get_test_keys () { - return ('tag', 'data', 'expect-header', 'ignore'); -} - -# XXX: incomplete -sub test_content_as_string ($) { - - my $test_ref = shift; - my %test = %{$test_ref}; - - my $s = "\n\t"; - - foreach my $key (get_test_keys()) { - $test{$key} = 'Not set' unless (defined $test{$key}); - } - - $s .= 'Tag: ' . $test{'tag'}; - $s .= "\n\t"; - $s .= 'Set header: ' . $test{'data'}; # XXX: adjust for other test types - $s .= "\n\t"; - $s .= 'Expected header: ' . $test{'expect-header'}; - $s .= "\n\t"; - $s .= 'Ignore: ' . $test{'ignore'}; - - return $s; -} - -sub fuzz_header($) { - my $header = shift; - my $white_space = int(rand(2)) - 1 ? " " : "\t"; - - $white_space = $white_space x (1 + int(rand(5))); - - # Only fuzz white space before the first quoted token. - # (Privoxy doesn't touch white space inside quoted tokens - # and modifying it would cause the tests to fail). - $header =~ s@(^[^"]*?)\s@$1$white_space@g; - - return $header; -} - -############################################################################ -# -# HTTP fetch functions -# -############################################################################ - -sub check_for_curl () { - my $curl = CURL; - l(LL_ERROR, "No curl found.") unless (`which $curl`); -} - -sub get_cgi_page_or_else ($) { - - my $cgi_url = shift; - my $content_ref = get_page_with_curl($cgi_url); - my $status_code = get_status_code($content_ref); - - if (200 != $status_code) { - - my $log_message = "Failed to fetch Privoxy CGI Page. " . - "Received status code ". $status_code . - " while only 200 is acceptable."; - - if (cli_option_is_set('fuzzer-feeding')) { - - $log_message .= " Ignored due to fuzzer feeding."; - l(LL_SOFT_ERROR, $log_message) - - } else { - - l(LL_ERROR, $log_message); - } - } - - return $content_ref; -} - -# XXX: misleading name -sub get_show_request_with_curl ($) { - - our $privoxy_cgi_url; - my $test_ref = shift; - my %test = %{$test_ref}; - - my $curl_parameters = ' '; - my $header = $test{'data'}; - - if (cli_option_is_set('header-fuzzing')) { - $header = fuzz_header($header); - } - - # Enable the action to test - $curl_parameters .= '-H \'X-Privoxy-Control: ' . $test{'tag'} . '\' '; - # The header to filter - $curl_parameters .= '-H \'' . $header . '\' '; - - $curl_parameters .= ' '; - $curl_parameters .= $privoxy_cgi_url; - $curl_parameters .= 'show-request'; - - return get_cgi_page_or_else($curl_parameters); -} - -sub get_head_with_curl ($) { - - our $fellatio_url = FELLATIO_URL; - my $test_ref = shift; - my %test = %{$test_ref}; - - my $curl_parameters = ' '; - - # Enable the action to test - $curl_parameters .= '-H \'X-Privoxy-Control: ' . $test{'tag'} . '\' '; - # The header to filter - $curl_parameters .= '-H \'X-Gimme-Head-With: ' . $test{'data'} . '\' '; - $curl_parameters .= '--head '; - - $curl_parameters .= ' '; - $curl_parameters .= $fellatio_url; - - return get_page_with_curl($curl_parameters); -} - -sub get_page_with_curl ($) { - - our $proxy; - - my $parameters = shift; - my @buffer; - my $curl_line = CURL; - my $retries_left = get_cli_option('retries') + 1; - my $failure_reason; - - $curl_line .= ' --proxy ' . $proxy if (defined $proxy); - - # We want to see the HTTP status code - $curl_line .= " --include "; - # Let Privoxy emit two log messages less. - $curl_line .= ' -H \'Proxy-Connection:\' ' unless $parameters =~ /Proxy-Connection:/; - $curl_line .= ' -H \'Connection: close\' ' unless $parameters =~ /Connection:/; - # We don't care about fetch statistic. - $curl_line .= " -s "; - # We do care about the failure reason if any. - $curl_line .= " -S "; - # We want to advertise ourselves - $curl_line .= " --user-agent '" . PRT_VERSION . "' "; - # We aren't too patient - $curl_line .= " --max-time '" . get_cli_option('max-time') . "' "; - - $curl_line .= $parameters; - # XXX: still necessary? - $curl_line .= ' 2>&1'; - - l(LL_PAGE_FETCHING, "Executing: " . $curl_line); - - do { - @buffer = `$curl_line`; - - if ($?) { - $failure_reason = array_as_string(\@buffer); - chomp $failure_reason; - l(LL_SOFT_ERROR, "Fetch failure: '" . $failure_reason . $! ."'"); - } - } while ($? && --$retries_left); - - unless ($retries_left) { - l(LL_ERROR, - "Running curl failed " . get_cli_option('retries') . - " times in a row. Last error: '" . $failure_reason . "'."); - } - - return \@buffer; -} - - -############################################################################ -# -# Log functions -# -############################################################################ - -sub array_as_string ($) { - my $array_ref = shift; - my $string = ''; - - foreach (@{$array_ref}) { - $string .= $_; - } - - return $string; -} - -sub show_test ($) { - my $test_ref = shift; - log_message('Test is:' . test_content_as_string($test_ref)); -} - -# Conditional log -sub l ($$) { - our $log_level; - my $this_level = shift; - my $message = shift; - - return unless ($log_level & $this_level); - - if (LL_ERROR & $this_level) { - $message = 'Oh noes. ' . $message . ' Fatal error. Exiting.'; - } - - log_message($message); - - if (LL_ERROR & $this_level) { - exit; - } -} - -sub log_message ($) { - - my $message = shift; - - our $logfile; - our $no_logging; - our $leading_log_date; - our $leading_log_time; - - my $time_stamp = ''; - my ( $sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst ) = localtime time; - - if ($leading_log_date || $leading_log_time) { - - if ($leading_log_date) { - $year += 1900; - $mon += 1; - $time_stamp = sprintf("%i/%.2i/%.2i", $year, $mon, $mday); - } - - if ($leading_log_time) { - $time_stamp .= ' ' if $leading_log_date; - $time_stamp.= sprintf("%.2i:%.2i:%.2i", $hour, $min, $sec); - } - - $message = $time_stamp . ": " . $message; - } - - printf(STDERR "%s\n", $message); -} - -sub log_result ($$) { - - our $verbose_test_description; - our $filtered_request; - - my $test_ref = shift; - my $result = shift; - my $number = shift; - - my %test = %{$test_ref}; - my $message = ''; - - $message .= interpret_result($result); - $message .= " for test "; - $message .= $number; - $message .= '/'; - $message .= $test{'number'}; - $message .= '/'; - $message .= $test{'section-id'}; - $message .= '/'; - $message .= $test{'regression-test-id'}; - $message .= '.'; - - if ($verbose_test_description) { - - if ($test{'type'} == CLIENT_HEADER_TEST) { - - $message .= ' Header '; - $message .= quote($test{'data'}); - $message .= ' and tag '; - $message .= quote($test{'tag'}); - - } elsif ($test{'type'} == SERVER_HEADER_TEST) { - - $message .= ' Request Header '; - $message .= quote($test{'data'}); - $message .= ' and tag '; - $message .= quote($test{'tag'}); - - } elsif ($test{'type'} == DUMB_FETCH_TEST) { - - $message .= ' URL '; - $message .= quote($test{'data'}); - $message .= ' and expected status code '; - $message .= quote($test{'expected-status-code'}); - - } elsif ($test{'type'} == TRUSTED_CGI_REQUEST) { - - $message .= ' CGI URL '; - $message .= quote($test{'data'}); - $message .= ' and expected status code '; - $message .= quote($test{'expected-status-code'}); - - } elsif ($test{'type'} == METHOD_TEST) { - - $message .= ' HTTP method '; - $message .= quote($test{'data'}); - $message .= ' and expected status code '; - $message .= quote($test{'expected-status-code'}); - - } elsif ($test{'type'} == BLOCK_TEST) { - - $message .= ' Supposedly-blocked URL: '; - $message .= quote($test{'data'}); - - } elsif ($test{'type'} == STICKY_ACTIONS_TEST) { - - $message .= ' Sticky Actions: '; - $message .= quote($test{'sticky-actions'}); - $message .= ' and URL: '; - $message .= quote($test{'data'}); - - } else { - - die "Incomplete support for test type " . $test{'type'} . " detected."; - } - } - - log_message($message) if (!$result or cli_option_is_set('verbose')); -} - -sub quote ($) { - my $s = shift; - return '\'' . $s . '\''; -} - -sub print_version () { - printf PRT_VERSION . "\n" . 'Copyright (C) 2007-2009 Fabian Keil <fk(a)fabiankeil.de>' . "\n"; -} - -sub help () { - - our %cli_options; - - print_version(); - - print << " EOF" - -Options and their default values if they have any: - [--debug $cli_options{'debug'}] - [--forks $cli_options{'forks'}] - [--fuzzer-address] - [--fuzzer-feeding] - [--help] - [--header-fuzzing] - [--level] - [--loops $cli_options{'loops'}] - [--max-level $cli_options{'max-level'}] - [--max-time $cli_options{'max-time'}] - [--min-level $cli_options{'min-level'}] - [--privoxy-address] - [--retries $cli_options{'retries'}] - [--show-skipped-tests] - [--test-number] - [--verbose] - [--version] -see "perldoc $0" for more information - EOF - ; - exit(0); -} - -sub init_cli_options () { - - our %cli_options; - our $log_level; - - $cli_options{'debug'} = $log_level; - $cli_options{'forks'} = CLI_FORKS; - $cli_options{'loops'} = CLI_LOOPS; - $cli_options{'max-level'} = CLI_MAX_LEVEL; - $cli_options{'max-time'} = CLI_MAX_TIME; - $cli_options{'min-level'} = CLI_MIN_LEVEL; - $cli_options{'retries'} = CLI_RETRIES; -} - -sub parse_cli_options () { - - our %cli_options; - our $log_level; - - init_cli_options(); - - GetOptions ( - 'debug=s' => \$cli_options{'debug'}, - 'forks=s' => \$cli_options{'forks'}, - 'fuzzer-address=s' => \$cli_options{'fuzzer-address'}, - 'fuzzer-feeding' => \$cli_options{'fuzzer-feeding'}, - 'header-fuzzing' => \$cli_options{'header-fuzzing'}, - 'help' => sub {help}, - 'level=s' => \$cli_options{'level'}, - 'loops=s' => \$cli_options{'loops'}, - 'max-level=s' => \$cli_options{'max-level'}, - 'max-time=s' => \$cli_options{'max-time'}, - 'min-level=s' => \$cli_options{'min-level'}, - 'privoxy-address=s' => \$cli_options{'privoxy-address'}, - 'retries=s' => \$cli_options{'retries'}, - 'show-skipped-tests' => \$cli_options{'show-skipped-tests'}, - 'test-number=s' => \$cli_options{'test-number'}, - 'verbose' => \$cli_options{'verbose'}, - 'version' => sub {print_version && exit(0)} - ); - $log_level |= $cli_options{'debug'}; -} - -sub cli_option_is_set ($) { - - our %cli_options; - my $cli_option = shift; - - return defined $cli_options{$cli_option}; -} - -sub get_cli_option ($) { - - our %cli_options; - my $cli_option = shift; - - die "Unknown CLI option: $cli_option" unless defined $cli_options{$cli_option}; - - return $cli_options{$cli_option}; -} - -sub init_proxy_settings($) { - - my $choice = shift; - our $proxy = undef; - - if (($choice eq 'fuzz-proxy') and cli_option_is_set('fuzzer-address')) { - $proxy = get_cli_option('fuzzer-address'); - } - - if ((not defined $proxy) or ($choice eq 'vanilla-proxy')) { - - if (cli_option_is_set('privoxy-address')) { - $proxy .= get_cli_option('privoxy-address'); - } - - } -} - -sub start_forks($) { - my $forks = shift; - - l(LL_ERROR, "Invalid --fork value: " . $forks . ".") if ($forks < 0); - - foreach my $fork (1 .. $forks) { - log_message("Starting fork $fork"); - my $pid = fork(); - if (defined $pid && !$pid) { - return; - } - } -} - -sub main () { - - init_our_variables(); - parse_cli_options(); - check_for_curl(); - init_proxy_settings('vanilla-proxy'); - load_regressions_tests(); - init_proxy_settings('fuzz-proxy'); - start_forks(get_cli_option('forks')) if cli_option_is_set('forks'); - execute_regression_tests(); -} - -main(); - -=head1 NAME - -B<privoxy-regression-test> - A regression test "framework" for Privoxy. - -=head1 SYNOPSIS - -B<privoxy-regression-test> [B<--debug bitmask>] [B<--forks> forks] -[B<--fuzzer-feeding>] [B<--fuzzer-feeding>] [B<--help>] [B<--level level>] -[B<--loops count>] [B<--max-level max-level>] [B<--max-time max-time>] -[B<--min-level min-level>] B<--privoxy-address proxy-address> -[B<--retries retries>] [B<--test-number test-number>] -[B<--show-skipped-tests>] [B<--verbose>] -[B<--version>] - -=head1 DESCRIPTION - -Privoxy-Regression-Test is supposed to one day become -a regression test suite for Privoxy. It's not quite there -yet, however, and can currently only test header actions, -check the returned status code for requests to arbitrary -URLs and verify which actions are applied to them. - -Client header actions are tested by requesting -B<http://p.p/show-request> and checking whether -or not Privoxy modified the original request as expected. - -The original request contains both the header the action-to-be-tested -acts upon and an additional tagger-triggering header that enables -the action to test. - -Applied actions are checked through B<http://p.p/show-url-info>. - -=head1 CONFIGURATION FILE SYNTAX - -Privoxy-Regression-Test's configuration is embedded in -Privoxy action files and loaded through Privoxy's web interface. - -It makes testing a Privoxy version running on a remote system easier -and should prevent you from updating your tests without updating Privoxy's -configuration accordingly. - -A client-header-action test section looks like this: - - # Set Header = Referer: http://www.example.org.zwiebelsuppe.exit/ - # Expect Header = Referer: http://www.example.org/ - {+client-header-filter{hide-tor-exit-notation} -hide-referer} - TAG:^client-header-filter\{hide-tor-exit-notation\}$ - -The example above causes Privoxy-Regression-Test to set -the header B<Referer: http://www.example.org.zwiebelsuppe.exit/> -and to expect it to be modified to -B<Referer: http://www.example.org/>. - -When testing this section, Privoxy-Regression-Test will set the header -B<X-Privoxy-Control: client-header-filter{hide-tor-exit-notation}> -causing the B<privoxy-control> tagger to create the tag -B<client-header-filter{hide-tor-exit-notation}> which will finally -cause Privoxy to enable the action section. - -Note that the actions itself are only used by Privoxy, -Privoxy-Regression-Test ignores them and will be happy -as long as the expectations are satisfied. - -A fetch test looks like this: - - # Fetch Test = http://p.p/user-manual - # Expect Status Code = 302 - -It tells Privoxy-Regression-Test to request B<http://p.p/user-manual> -and to expect a response with the HTTP status code B<302>. Obviously that's -not a very thorough test and mainly useful to get some code coverage -for Valgrind or to verify that the templates are installed correctly. - -If you want to test CGI pages that require a trusted -referer, you can use: - - # Trusted CGI Request = http://p.p/edit-actions - -It works like ordinary fetch tests, but sets the referer -header to a trusted value. - -If no explicit status code expectation is set, B<200> is used. - -To verify that a URL is blocked, use: - - # Blocked URL = http://www.example.com/blocked - -To verify that a specific set of actions is applied to an URL, use: - - # Sticky Actions = +block{foo} +handle-as-empty-document -handle-as-image - # URL = http://www.example.org/my-first-url - -The sticky actions will be checked for all URLs below it -until the next sticky actions directive. - -=head1 TEST LEVELS - -All tests have test levels to let the user -control which ones to execute (see I<OPTIONS> below). -Test levels are either set with the B<Level> directive, -or implicitly through the test type. - -Block tests default to level 7, fetch tests to level 6, -"Sticky Actions" tests default to level 5, tests for trusted CGI -requests to level 3 and client-header-action tests to level 1. - -=head1 OPTIONS - -B<--debug bitmask> Add the bitmask provided as integer -to the debug settings. - -B<--forks forks> Number of forks to start before executing -the regression tests. This is mainly useful for stress-testing. - -B<--fuzzer-address> Listening address used when executing -the regression tests. Useful to make sure that the requests -to load the regression tests don't fail due to fuzzing. - -B<--fuzzer-feeding> Ignore some errors that would otherwise -cause Privoxy-Regression-Test to abort the test because -they shouldn't happen in normal operation. This option is -intended to be used if Privoxy-Regression-Test is only -used to feed a fuzzer in which case there's a high chance -that Privoxy gets an invalid request and returns an error -message. - -B<--help> Shows available command line options. - -B<--header-fuzzing> Modifies linear white space in -headers in a way that should not affect the test result. - -B<--level level> Only execute tests with the specified B<level>. - -B<--loop count> Loop through the regression tests B<count> times. -Useful to feed a fuzzer, or when doing stress tests with -several Privoxy-Regression-Test instances running at the same -time. - -B<--max-level max-level> Only execute tests with a B<level> -below or equal to the numerical B<max-level>. - -B<--max-time max-time> Give Privoxy B<max-time> seconds -to return data. Increasing the default may make sense when -Privoxy is run through Valgrind, decreasing the default may -make sense when Privoxy-Regression-Test is used to feed -a fuzzer. - -B<--min-level min-level> Only execute tests with a B<level> -above or equal to the numerical B<min-level>. - -B<--privoxy-address proxy-address> Privoxy's listening address. -If it's not set, the value of the environment variable http_proxy -will be used. B<proxy-address> has to be specified in http_proxy -syntax. - -B<--retries retries> Retry B<retries> times. - -B<--test-number test-number> Only run the test with the specified -number. - -B<--show-skipped-tests> Log skipped tests even if verbose mode is off. - -B<--verbose> Log succesful and skipped tests. - -B<--version> Print version and exit. - -The second dash is optional, options can be shortened, -as long as there are no ambiguities. - -=head1 PRIVOXY CONFIGURATION - -Privoxy-Regression-Test is shipped with B<regression-tests.action> -which aims to test all official client-header modifying actions -and can be used to verify that the templates and the user manual -files are installed correctly. - -To use it, it has to be copied in Privoxy's configuration -directory, and afterwards referenced in Privoxy's configuration -file with the line: - - actionsfile regression-tests.action - -In general, its tests are supposed to work without changing -any other action files, unless you already added lots of -taggers yourself. If you are using taggers that cause problems, -you might have to temporary disable them for Privoxy's CGI pages. - -Some of the regression tests rely on Privoxy features that -may be disabled in your configuration. Tests with a level below -7 are supposed to work with all Privoxy configurations (provided -you didn't build with FEATURE_GRACEFUL_TERMINATION). - -Tests with level 9 require Privoxy to deliver the User Manual, -tests with level 12 require the CGI editor to be enabled. - -=head1 CAVEATS - -Expect the configuration file syntax to change with future releases. - -=head1 LIMITATIONS - -As Privoxy's B<show-request> page only shows client headers, -Privoxy-Regression-Test can't use it to test Privoxy actions -that modify server headers. - -As Privoxy-Regression-Test relies on Privoxy's tag feature to -control the actions to test, it currently only works with -Privoxy 3.0.7 or later. - -At the moment Privoxy-Regression-Test fetches Privoxy's -configuration page through I<curl>(1), therefore you have to -have I<curl> installed, otherwise you won't be able to run -Privoxy-Regression-Test in a meaningful way. - -=head1 SEE ALSO - -privoxy(1) curl(1) - -=head1 AUTHOR - -Fabian Keil <fk(a)fabiankeil.de> - -=cut diff --git a/external/privoxy/tools/url-pattern-translator.pl b/external/privoxy/tools/url-pattern-translator.pl deleted file mode 100755 index a575333..0000000 --- a/external/privoxy/tools/url-pattern-translator.pl +++ /dev/null @@ -1,139 +0,0 @@ -#!/usr/bin/perl - -############################################################################ -# -# url-pattern-translator -# -# Filters Privoxy action files and changes old-school URL patterns to -# use extended regular expressions for the host as well. -# -# While it works good enough to satisfy the regression tests in -# default.action.master, it isn't perfect and you should double-check -# the output and keep backups of your old action files. -# -# Usage: -# -# url-pattern-translator.pl old.action > new.action -# -# Only convert your files once, or, as RoboCop used to say, -# there will be... trouble. -# -# $Id: url-pattern-translator.pl,v 1.3 2009/01/13 17:01:04 fabiankeil Exp $ -# -# Copyright (c) 2008 Fabian Keil <fk(a)fabiankeil.de> -# -# Permission to use, copy, modify, and distribute this software for any -# purpose with or without fee is hereby granted, provided that the above -# copyright notice and this permission notice appear in all copies. -# -# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -# -############################################################################ - -use strict; -use warnings; - -sub p ($) { - my $message = shift; - print $message . "\n"; -} - -sub convert_host_pattern ($) { - my $host_pattern = shift; - my $hp = $host_pattern; - - $hp =~ s@\s@@g; - - if ($hp =~ m@^\.@) { - # Not left-anchored - # - # XXX: This is somewhat ugly and while it's - # the equivalent pattern in most cases - # \. should be good enough. - $hp =~ s@^\.@(^|.)@; - } else { - # left-anchored - $hp = '^' . $hp; - } - - # Match-all syntax has changed ... - $hp =~ s@\*@.*@g; - - # Extended host patterns are right-anchored by default - $hp =~ s@\.$@(\..*)?@; - - # Literal dots have to be escaped - $hp =~ s@((?<!\\)\.[^*])@\\$1@g; - - # Match single character with a dot. - $hp =~ s@(?<!\))\?@.@g; - - return $hp; -} - -sub looks_interesting($) { - my $line = shift; - my $type_to_skip = undef; - - if (/^\s*\#/) { - - $type_to_skip = "comment"; - - } elsif (/[{}]/ or /\\$/) { - - $type_to_skip = "action settings"; - - } elsif (m@^\s*$@) { - - $type_to_skip = "whitespace"; - - } elsif (m@^\s*TAG:@) { - - $type_to_skip = "tag patttern"; - - } elsif (m@^[^/]*=@) { - - $type_to_skip = "macro or version definition"; - - } elsif (m@^\s*standard\.@) { - - $type_to_skip = "predefined settings"; - - } - - #p("Skipping " . $type_to_skip . ": " . $_) if defined $type_to_skip; - - return not defined $type_to_skip; -} - -sub main () { - my $host = undef; - my $path = undef; - - while (<>) { - chomp; - - if (looks_interesting($_)) { - if (m@^([^/]+)(/.*)$@) { - $host = $1; - $path = $2; - $host = convert_host_pattern($host); - $_ = $host . $path; - } - elsif (m@^([^/]*)$@) { - $host = $1; - $host = convert_host_pattern($host); - $_ = $host; - } - } - p($_); - } -} - -main(); diff --git a/external/privoxy/trust b/external/privoxy/trust deleted file mode 100644 index 5767363..0000000 --- a/external/privoxy/trust +++ /dev/null @@ -1,85 +0,0 @@ -###################################################################### -# -# File : $Source: /cvsroot/ijbswa/current/trust,v $ -# -# $Id: trust,v 1.6 2007/05/14 17:19:42 fabiankeil Exp $ -# -# Purpose : Trustfiles are an experimental feature and can be used -# to build "whitelists" (versus the usual "blacklists" -# techniques). -# -# Copyright : Written by and Copyright -# Privoxy team. http://www.privoxy.org/ -# -# Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and -# Junkbusters Corporation. http://www.junkbusters.com -# -# We value your feedback. However, to provide you with the best support, -# please note: -# -# * Use the support forum to get help: -# http://sourceforge.net/tracker/?group_id=11118&atid=211118 -# * Submit bugs only thru our bug forum: -# http://sourceforge.net/tracker/?group_id=11118&atid=111118 -# Make sure that the bug has not already been submitted. Please try -# to verify that it is a Privoxy bug, and not a browser or site -# bug first. If you are using your own custom configuration, please -# try the stock configs to see if the problem is a configuration -# related bug. And if not using the latest development snapshot, -# please try the latest one. Or even better, CVS sources. -# * Submit feature requests only thru our feature request tracker: -# http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse -# -# For any other issues, feel free to use the mailing lists: -# http://sourceforge.net/mail/?group_id=11118 -# -# Anyone interested in actively participating in development and related -# discussions can join the appropriate mailing list here: -# http://sourceforge.net/mail/?group_id=11118. Archives are available -# here too. -# -###################################################################### -# -# Sample Trustfile for Privoxy - -# For this file to have any effect, the line in the main config file beginning -# with "trustfile" must be uncommented, with the name of this file following the -# word "trustfile". - -# Trustfiles are an experimental feature used for building "whitelists" -# of "trusted" sites (versus the usual "blacklists" technique). For more -# detail, see http://www.privoxy.org/user-manual/config.html#TRUSTFILE. - -# List trusted domains here. The default is to block any URL that is NOT -# referenced. Access to trusted domains includes all paths within that -# domain. - -# Preceding a domain with a '+' character will designate that domain -# as a "trusted referrer", meaning any requests whose HTTP "Referer" headers -# contain an URL from that domain will be allowed, and the previously untrusted -# host will be dynamically added to this file. Thus, this builds a "white-list" -# of hosts the user is allowed to visit. - -# Note this means that the file will grow with use! - -# Also note that you can only trust referrers if you control the user's -# system and make sure that there are no programs available that allow -# to set arbitrary headers. - -# Preceding the domain with '~' character allows access to that domain only -# (including all paths within that domain), but does not allow access to links -# to other, outside domains. Sites that are added dynamically by trusted -# referrers will include the '~' character, and thus do not become trusted -# referrers themselves. - -# Example: to allow example.com and to white-list domains that appear to -# be reached through links from example.com, uncomment this line: - -# +example.com - -# The next two lines make sure that the user can access Privoxy's -# CGI pages, without automatically trusting their links. - -~config.privoxy.org -~p.p diff --git a/external/privoxy/urlmatch.c b/external/privoxy/urlmatch.c deleted file mode 100644 index 47b607c..0000000 --- a/external/privoxy/urlmatch.c +++ /dev/null @@ -1,1452 +0,0 @@ -const char urlmatch_rcs[] = "$Id: urlmatch.c,v 1.47 2009/03/02 19:18:10 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/urlmatch.c,v $ - * - * Purpose : Declares functions to match URLs against URL - * patterns. - * - * Copyright : Written by and Copyright (C) 2001-2009 - * the Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: urlmatch.c,v $ - * Revision 1.47 2009/03/02 19:18:10 fabiankeil - * Streamline parse_http_request()'s prototype. As - * cparser pointed out it doesn't actually use csp. - * - * Revision 1.46 2009/02/11 19:31:32 fabiankeil - * Reject request lines that end with neither HTTP/1.0 nor HTTP/1.1. - * - * Revision 1.45 2008/06/21 21:19:18 fabiankeil - * Silence bogus compiler warning. - * - * Revision 1.44 2008/05/04 16:18:32 fabiankeil - * Provide parse_http_url() with a third parameter to specify - * whether or not URLs without protocol are acceptable. - * - * Revision 1.43 2008/05/04 13:30:55 fabiankeil - * Streamline parse_http_url()'s prototype. - * - * Revision 1.42 2008/05/04 13:24:16 fabiankeil - * If the method isn't CONNECT, reject URLs without protocol. - * - * Revision 1.41 2008/05/02 09:51:34 fabiankeil - * In parse_http_url(), don't muck around with values - * that are none of its business: require an initialized - * http structure and never unset http->ssl. - * - * Revision 1.40 2008/04/23 16:12:28 fabiankeil - * Free with freez(). - * - * Revision 1.39 2008/04/22 16:27:42 fabiankeil - * In parse_http_request(), remove a pointless - * temporary variable and free the buffer earlier. - * - * Revision 1.38 2008/04/18 05:17:18 fabiankeil - * Mark simplematch()'s parameters as immutable. - * - * Revision 1.37 2008/04/17 14:53:29 fabiankeil - * Move simplematch() into urlmatch.c as it's only - * used to match (old-school) domain patterns. - * - * Revision 1.36 2008/04/14 18:19:48 fabiankeil - * Remove now-pointless cast in create_url_spec(). - * - * Revision 1.35 2008/04/14 18:11:21 fabiankeil - * The compiler might not notice it, but the buffer passed to - * create_url_spec() is modified later on and thus shouldn't - * be declared immutable. - * - * Revision 1.34 2008/04/13 13:32:07 fabiankeil - * Factor URL pattern compilation out of create_url_spec(). - * - * Revision 1.33 2008/04/12 14:03:13 fabiankeil - * Remove an obvious comment and improve another one. - * - * Revision 1.32 2008/04/12 12:38:06 fabiankeil - * Factor out duplicated code to compile host, path and tag patterns. - * - * Revision 1.31 2008/04/10 14:41:04 fabiankeil - * Ditch url_spec's path member now that it's no longer used. - * - * Revision 1.30 2008/04/10 04:24:24 fabiankeil - * Stop duplicating the plain text representation of the path regex - * (and keeping the copy around). Once the regex is compiled it's no - * longer useful. - * - * Revision 1.29 2008/04/10 04:17:56 fabiankeil - * In url_match(), check the right member for NULL when determining - * whether there's a path regex to execute. Looking for a plain-text - * representation works as well, but it looks "interesting" and that - * member will be removed soonish anyway. - * - * Revision 1.28 2008/04/08 16:07:39 fabiankeil - * Make it harder to mistake url_match()'s - * second parameter for an url_spec. - * - * Revision 1.27 2008/04/08 15:44:33 fabiankeil - * Save a bit of memory (and a few cpu cycles) by not bothering to - * compile slash-only path regexes that don't affect the result. - * - * Revision 1.26 2008/04/07 16:57:18 fabiankeil - * - Use free_url_spec() more consistently. - * - Let it reset url->dcount just in case. - * - * Revision 1.25 2008/04/06 15:18:38 fabiankeil - * Oh well, rename the --enable-pcre-host-patterns option to - * --enable-extended-host-patterns as it's not really PCRE syntax. - * - * Revision 1.24 2008/04/06 14:54:26 fabiankeil - * Use PCRE syntax in host patterns when configured - * with --enable-pcre-host-patterns. - * - * Revision 1.23 2008/04/05 12:19:20 fabiankeil - * Factor compile_host_pattern() out of create_url_spec(). - * - * Revision 1.22 2008/03/30 15:02:32 fabiankeil - * SZitify unknown_method(). - * - * Revision 1.21 2007/12/24 16:34:23 fabiankeil - * Band-aid (and micro-optimization) that makes it less likely to run out of - * stack space with overly-complex path patterns. Probably masks the problem - * reported by Lee in #1856679. Hohoho. - * - * Revision 1.20 2007/09/02 15:31:20 fabiankeil - * Move match_portlist() from filter.c to urlmatch.c. - * It's used for url matching, not for filtering. - * - * Revision 1.19 2007/09/02 13:42:11 fabiankeil - * - Allow port lists in url patterns. - * - Ditch unused url_spec member pathlen. - * - * Revision 1.18 2007/07/30 16:42:21 fabiankeil - * Move the method check into unknown_method() - * and loop through the known methods instead - * of using a screen-long OR chain. - * - * Revision 1.17 2007/04/15 16:39:21 fabiankeil - * Introduce tags as alternative way to specify which - * actions apply to a request. At the moment tags can be - * created based on client and server headers. - * - * Revision 1.16 2007/02/13 13:59:24 fabiankeil - * Remove redundant log message. - * - * Revision 1.15 2007/01/28 16:11:23 fabiankeil - * Accept WebDAV methods for subversion - * in parse_http_request(). Closes FR 1581425. - * - * Revision 1.14 2007/01/06 14:23:56 fabiankeil - * Fix gcc43 warnings. Mark *csp as immutable - * for parse_http_url() and url_match(). - * Replace a sprintf call with snprintf. - * - * Revision 1.13 2006/12/06 19:50:54 fabiankeil - * parse_http_url() now handles intercepted - * HTTP request lines as well. Moved parts - * of parse_http_url()'s code into - * init_domain_components() so that it can - * be reused in chat(). - * - * Revision 1.12 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.10.2.7 2003/05/17 15:57:24 oes - * - parse_http_url now checks memory allocation failure for - * duplication of "*" URL and rejects "*something" URLs - * Closes bug #736344 - * - Added a comment to what might look like a bug in - * create_url_spec (see !bug #736931) - * - Comment cosmetics - * - * Revision 1.10.2.6 2003/05/07 12:39:48 oes - * Fix typo: Default port for https URLs is 443, not 143. - * Thanks to Scott Tregear for spotting this one. - * - * Revision 1.10.2.5 2003/02/28 13:09:29 oes - * Fixed a rare double free condition as per Bug #694713 - * - * Revision 1.10.2.4 2003/02/28 12:57:44 oes - * Moved freeing of http request structure to its owner - * as per Dan Price's observations in Bug #694713 - * - * Revision 1.10.2.3 2002/11/12 16:50:40 oes - * Fixed memory leak in parse_http_request() reported by Oliver Stoeneberg. Fixes bug #637073 - * - * Revision 1.10.2.2 2002/09/25 14:53:15 oes - * Added basic support for OPTIONS and TRACE HTTP methods: - * parse_http_url now recognizes the "*" URI as well as - * the OPTIONS and TRACE method keywords. - * - * Revision 1.10.2.1 2002/06/06 19:06:44 jongfoster - * Adding support for proprietary Microsoft WebDAV extensions - * - * Revision 1.10 2002/05/12 21:40:37 jongfoster - * - Removing some unused code - * - * Revision 1.9 2002/04/04 00:36:36 gliptak - * always use pcre for matching - * - * Revision 1.8 2002/04/03 23:32:47 jongfoster - * Fixing memory leak on error - * - * Revision 1.7 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.6 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.5 2002/03/13 00:27:05 jongfoster - * Killing warnings - * - * Revision 1.4 2002/03/07 03:46:17 oes - * Fixed compiler warnings - * - * Revision 1.3 2002/03/03 14:51:11 oes - * Fixed CLF logging: Added ocmd member for client's request to struct http_request - * - * Revision 1.2 2002/01/21 00:14:09 jongfoster - * Correcting comment style - * Fixing an uninitialized memory bug in create_url_spec() - * - * Revision 1.1 2002/01/17 20:53:46 jongfoster - * Moving all our URL and URL pattern parsing code to the same file - it - * was scattered around in filters.c, loaders.c and parsers.c. - * - * Providing a single, simple url_match(pattern,url) function - rather than - * the 3-line match routine which was repeated all over the place. - * - * Renaming free_url to free_url_spec, since it frees a struct url_spec. - * - * Providing parse_http_url() so that URLs can be parsed without faking a - * HTTP request line for parse_http_request() or repeating the parsing - * code (both of which were techniques that were actually in use). - * - * Standardizing that struct http_request is used to represent a URL, and - * struct url_spec is used to represent a URL pattern. (Before, URLs were - * represented as seperate variables and a partially-filled-in url_spec). - * - * - *********************************************************************/ - - -#include "config.h" - -#ifndef _WIN32 -#include <stdio.h> -#include <sys/types.h> -#endif - -#include <stdlib.h> -#include <ctype.h> -#include <assert.h> -#include <string.h> - -#if !defined(_WIN32) && !defined(__OS2__) -#include <unistd.h> -#endif - -#include "project.h" -#include "urlmatch.h" -#include "ssplit.h" -#include "miscutil.h" -#include "errlog.h" - -const char urlmatch_h_rcs[] = URLMATCH_H_VERSION; - -enum regex_anchoring {NO_ANCHORING, LEFT_ANCHORED, RIGHT_ANCHORED}; -static jb_err compile_host_pattern(struct url_spec *url, const char *host_pattern); - -/********************************************************************* - * - * Function : free_http_request - * - * Description : Freez a http_request structure - * - * Parameters : - * 1 : http = points to a http_request structure to free - * - * Returns : N/A - * - *********************************************************************/ -void free_http_request(struct http_request *http) -{ - assert(http); - - freez(http->cmd); - freez(http->ocmd); - freez(http->gpc); - freez(http->host); - freez(http->url); - freez(http->hostport); - freez(http->path); - freez(http->ver); - freez(http->host_ip_addr_str); - freez(http->dbuffer); - freez(http->dvec); - http->dcount = 0; -} - - -/********************************************************************* - * - * Function : init_domain_components - * - * Description : Splits the domain name so we can compare it - * against wildcards. It used to be part of - * parse_http_url, but was separated because the - * same code is required in chat in case of - * intercepted requests. - * - * Parameters : - * 1 : http = pointer to the http structure to hold elements. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out of memory - * JB_ERR_PARSE on malformed command/URL - * or >100 domains deep. - * - *********************************************************************/ -jb_err init_domain_components(struct http_request *http) -{ - char *vec[BUFFER_SIZE]; - size_t size; - char *p; - - http->dbuffer = strdup(http->host); - if (NULL == http->dbuffer) - { - return JB_ERR_MEMORY; - } - - /* map to lower case */ - for (p = http->dbuffer; *p ; p++) - { - *p = (char)tolower((int)(unsigned char)*p); - } - - /* split the domain name into components */ - http->dcount = ssplit(http->dbuffer, ".", vec, SZ(vec), 1, 1); - - if (http->dcount <= 0) - { - /* - * Error: More than SZ(vec) components in domain - * or: no components in domain - */ - log_error(LOG_LEVEL_ERROR, "More than SZ(vec) components in domain or none at all."); - return JB_ERR_PARSE; - } - - /* save a copy of the pointers in dvec */ - size = (size_t)http->dcount * sizeof(*http->dvec); - - http->dvec = (char **)malloc(size); - if (NULL == http->dvec) - { - return JB_ERR_MEMORY; - } - - memcpy(http->dvec, vec, size); - - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : parse_http_url - * - * Description : Parse out the host and port from the URL. Find the - * hostname & path, port (if ':'), and/or password (if '@') - * - * Parameters : - * 1 : url = URL (or is it URI?) to break down - * 2 : http = pointer to the http structure to hold elements. - * Must be initialized with valid values (like NULLs). - * 3 : require_protocol = Whether or not URLs without - * protocol are acceptable. - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out of memory - * JB_ERR_PARSE on malformed command/URL - * or >100 domains deep. - * - *********************************************************************/ -jb_err parse_http_url(const char *url, struct http_request *http, int require_protocol) -{ - int host_available = 1; /* A proxy can dream. */ - - /* - * Save our initial URL - */ - http->url = strdup(url); - if (http->url == NULL) - { - return JB_ERR_MEMORY; - } - - - /* - * Check for * URI. If found, we're done. - */ - if (*http->url == '*') - { - if ( NULL == (http->path = strdup("*")) - || NULL == (http->hostport = strdup("")) ) - { - return JB_ERR_MEMORY; - } - if (http->url[1] != '\0') - { - return JB_ERR_PARSE; - } - return JB_ERR_OK; - } - - - /* - * Split URL into protocol,hostport,path. - */ - { - char *buf; - char *url_noproto; - char *url_path; - - buf = strdup(url); - if (buf == NULL) - { - return JB_ERR_MEMORY; - } - - /* Find the start of the URL in our scratch space */ - url_noproto = buf; - if (strncmpic(url_noproto, "http://", 7) == 0) - { - url_noproto += 7; - } - else if (strncmpic(url_noproto, "https://", 8) == 0) - { - /* - * Should only happen when called from cgi_show_url_info(). - */ - url_noproto += 8; - http->ssl = 1; - } - else if (*url_noproto == '/') - { - /* - * Short request line without protocol and host. - * Most likely because the client's request - * was intercepted and redirected into Privoxy. - */ - http->host = NULL; - host_available = 0; - } - else if (require_protocol) - { - freez(buf); - return JB_ERR_PARSE; - } - - url_path = strchr(url_noproto, '/'); - if (url_path != NULL) - { - /* - * Got a path. - * - * NOTE: The following line ignores the path for HTTPS URLS. - * This means that you get consistent behaviour if you type a - * https URL in and it's parsed by the function. (When the - * URL is actually retrieved, SSL hides the path part). - */ - http->path = strdup(http->ssl ? "/" : url_path); - *url_path = '\0'; - http->hostport = strdup(url_noproto); - } - else - { - /* - * Repair broken HTTP requests that don't contain a path, - * or CONNECT requests - */ - http->path = strdup("/"); - http->hostport = strdup(url_noproto); - } - - freez(buf); - - if ( (http->path == NULL) - || (http->hostport == NULL)) - { - return JB_ERR_MEMORY; - } - } - - if (!host_available) - { - /* Without host, there is nothing left to do here */ - return JB_ERR_OK; - } - - /* - * Split hostport into user/password (ignored), host, port. - */ - { - char *buf; - char *host; - char *port; - - buf = strdup(http->hostport); - if (buf == NULL) - { - return JB_ERR_MEMORY; - } - - /* check if url contains username and/or password */ - host = strchr(buf, '@'); - if (host != NULL) - { - /* Contains username/password, skip it and the @ sign. */ - host++; - } - else - { - /* No username or password. */ - host = buf; - } - - /* check if url contains port */ - port = strchr(host, ':'); - if (port != NULL) - { - /* Contains port */ - /* Terminate hostname and point to start of port string */ - *port++ = '\0'; - http->port = atoi(port); - } - else - { - /* No port specified. */ - http->port = (http->ssl ? 443 : 80); - } - - http->host = strdup(host); - - freez(buf); - - if (http->host == NULL) - { - return JB_ERR_MEMORY; - } - } - - /* - * Split domain name so we can compare it against wildcards - */ - return init_domain_components(http); - -} - - -/********************************************************************* - * - * Function : unknown_method - * - * Description : Checks whether a method is unknown. - * - * Parameters : - * 1 : method = points to a http method - * - * Returns : TRUE if it's unknown, FALSE otherwise. - * - *********************************************************************/ -static int unknown_method(const char *method) -{ - static const char *known_http_methods[] = { - /* Basic HTTP request type */ - "GET", "HEAD", "POST", "PUT", "DELETE", "OPTIONS", "TRACE", "CONNECT", - /* webDAV extensions (RFC2518) */ - "PROPFIND", "PROPPATCH", "MOVE", "COPY", "MKCOL", "LOCK", "UNLOCK", - /* - * Microsoft webDAV extension for Exchange 2000. See: - * http://lists.w3.org/Archives/Public/w3c-dist-auth/2002JanMar/0001.html - * http://msdn.microsoft.com/library/en-us/wss/wss/_webdav_methods.asp - */ - "BCOPY", "BMOVE", "BDELETE", "BPROPFIND", "BPROPPATCH", - /* - * Another Microsoft webDAV extension for Exchange 2000. See: - * http://systems.cs.colorado.edu/grunwald/MobileComputing/Papers/draft-cohen-… - * http://lists.w3.org/Archives/Public/w3c-dist-auth/2002JanMar/0001.html - * http://msdn.microsoft.com/library/en-us/wss/wss/_webdav_methods.asp - */ - "SUBSCRIBE", "UNSUBSCRIBE", "NOTIFY", "POLL", - /* - * Yet another WebDAV extension, this time for - * Web Distributed Authoring and Versioning (RFC3253) - */ - "VERSION-CONTROL", "REPORT", "CHECKOUT", "CHECKIN", "UNCHECKOUT", - "MKWORKSPACE", "UPDATE", "LABEL", "MERGE", "BASELINE-CONTROL", "MKACTIVITY", - }; - int i; - - for (i = 0; i < SZ(known_http_methods); i++) - { - if (0 == strcmpic(method, known_http_methods[i])) - { - return FALSE; - } - } - - return TRUE; - -} - - -/********************************************************************* - * - * Function : parse_http_request - * - * Description : Parse out the host and port from the URL. Find the - * hostname & path, port (if ':'), and/or password (if '@') - * - * Parameters : - * 1 : req = HTTP request line to break down - * 2 : http = pointer to the http structure to hold elements - * - * Returns : JB_ERR_OK on success - * JB_ERR_MEMORY on out of memory - * JB_ERR_CGI_PARAMS on malformed command/URL - * or >100 domains deep. - * - *********************************************************************/ -jb_err parse_http_request(const char *req, struct http_request *http) -{ - char *buf; - char *v[10]; /* XXX: Why 10? We should only need three. */ - int n; - jb_err err; - - memset(http, '\0', sizeof(*http)); - - buf = strdup(req); - if (buf == NULL) - { - return JB_ERR_MEMORY; - } - - n = ssplit(buf, " \r\n", v, SZ(v), 1, 1); - if (n != 3) - { - freez(buf); - return JB_ERR_PARSE; - } - - /* - * Fail in case of unknown methods - * which we might not handle correctly. - * - * XXX: There should be a config option - * to forward requests with unknown methods - * anyway. Most of them don't need special - * steps. - */ - if (unknown_method(v[0])) - { - log_error(LOG_LEVEL_ERROR, "Unknown HTTP method detected: %s", v[0]); - freez(buf); - return JB_ERR_PARSE; - } - - if (strcmpic(v[2], "HTTP/1.1") && strcmpic(v[2], "HTTP/1.0")) - { - log_error(LOG_LEVEL_ERROR, "The only supported HTTP " - "versions are 1.0 and 1.1. This rules out: %s", v[2]); - freez(buf); - return JB_ERR_PARSE; - } - - http->ssl = !strcmpic(v[0], "CONNECT"); - - err = parse_http_url(v[1], http, !http->ssl); - if (err) - { - freez(buf); - return err; - } - - /* - * Copy the details into the structure - */ - http->cmd = strdup(req); - http->gpc = strdup(v[0]); - http->ver = strdup(v[2]); - - freez(buf); - - if ( (http->cmd == NULL) - || (http->gpc == NULL) - || (http->ver == NULL) ) - { - return JB_ERR_MEMORY; - } - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : compile_pattern - * - * Description : Compiles a host, domain or TAG pattern. - * - * Parameters : - * 1 : pattern = The pattern to compile. - * 2 : anchoring = How the regex should be anchored. - * Can be either one of NO_ANCHORING, - * LEFT_ANCHORED or RIGHT_ANCHORED. - * 3 : url = In case of failures, the spec member is - * logged and the structure freed. - * 4 : regex = Where the compiled regex should be stored. - * - * Returns : JB_ERR_OK - Success - * JB_ERR_MEMORY - Out of memory - * JB_ERR_PARSE - Cannot parse regex - * - *********************************************************************/ -static jb_err compile_pattern(const char *pattern, enum regex_anchoring anchoring, - struct url_spec *url, regex_t **regex) -{ - int errcode; - char rebuf[BUFFER_SIZE]; - const char *fmt = NULL; - - assert(pattern); - assert(strlen(pattern) < sizeof(rebuf) - 2); - - if (pattern[0] == '\0') - { - *regex = NULL; - return JB_ERR_OK; - } - - switch (anchoring) - { - case NO_ANCHORING: - fmt = "%s"; - break; - case RIGHT_ANCHORED: - fmt = "%s$"; - break; - case LEFT_ANCHORED: - fmt = "^%s"; - break; - default: - log_error(LOG_LEVEL_FATAL, - "Invalid anchoring in compile_pattern %d", anchoring); - } - - *regex = zalloc(sizeof(**regex)); - if (NULL == *regex) - { - free_url_spec(url); - return JB_ERR_MEMORY; - } - - snprintf(rebuf, sizeof(rebuf), fmt, pattern); - - errcode = regcomp(*regex, rebuf, (REG_EXTENDED|REG_NOSUB|REG_ICASE)); - - if (errcode) - { - size_t errlen = regerror(errcode, *regex, rebuf, sizeof(rebuf)); - if (errlen > (sizeof(rebuf) - (size_t)1)) - { - errlen = sizeof(rebuf) - (size_t)1; - } - rebuf[errlen] = '\0'; - log_error(LOG_LEVEL_ERROR, "error compiling %s from %s: %s", - pattern, url->spec, rebuf); - free_url_spec(url); - - return JB_ERR_PARSE; - } - - return JB_ERR_OK; - -} - - -/********************************************************************* - * - * Function : compile_url_pattern - * - * Description : Compiles the three parts of an URL pattern. - * - * Parameters : - * 1 : url = Target url_spec to be filled in. - * 2 : buf = The url pattern to compile. Will be messed up. - * - * Returns : JB_ERR_OK - Success - * JB_ERR_MEMORY - Out of memory - * JB_ERR_PARSE - Cannot parse regex - * - *********************************************************************/ -static jb_err compile_url_pattern(struct url_spec *url, char *buf) -{ - char *p; - - p = strchr(buf, '/'); - if (NULL != p) - { - /* - * Only compile the regex if it consists of more than - * a single slash, otherwise it wouldn't affect the result. - */ - if (p[1] != '\0') - { - /* - * XXX: does it make sense to compile the slash at the beginning? - */ - jb_err err = compile_pattern(p, LEFT_ANCHORED, url, &url->preg); - - if (JB_ERR_OK != err) - { - return err; - } - } - *p = '\0'; - } - - p = strchr(buf, ':'); - if (NULL != p) - { - *p++ = '\0'; - url->port_list = strdup(p); - if (NULL == url->port_list) - { - return JB_ERR_MEMORY; - } - } - else - { - url->port_list = NULL; - } - - if (buf[0] != '\0') - { - return compile_host_pattern(url, buf); - } - - return JB_ERR_OK; - -} - - -#ifdef FEATURE_EXTENDED_HOST_PATTERNS -/********************************************************************* - * - * Function : compile_host_pattern - * - * Description : Parses and compiles a host pattern.. - * - * Parameters : - * 1 : url = Target url_spec to be filled in. - * 2 : host_pattern = Host pattern to compile. - * - * Returns : JB_ERR_OK - Success - * JB_ERR_MEMORY - Out of memory - * JB_ERR_PARSE - Cannot parse regex - * - *********************************************************************/ -static jb_err compile_host_pattern(struct url_spec *url, const char *host_pattern) -{ - return compile_pattern(host_pattern, RIGHT_ANCHORED, url, &url->host_regex); -} - -#else - -/********************************************************************* - * - * Function : compile_host_pattern - * - * Description : Parses and "compiles" an old-school host pattern. - * - * Parameters : - * 1 : url = Target url_spec to be filled in. - * 2 : host_pattern = Host pattern to parse. - * - * Returns : JB_ERR_OK - Success - * JB_ERR_MEMORY - Out of memory - * JB_ERR_PARSE - Cannot parse regex - * - *********************************************************************/ -static jb_err compile_host_pattern(struct url_spec *url, const char *host_pattern) -{ - char *v[150]; - size_t size; - char *p; - - /* - * Parse domain part - */ - if (host_pattern[strlen(host_pattern) - 1] == '.') - { - url->unanchored |= ANCHOR_RIGHT; - } - if (host_pattern[0] == '.') - { - url->unanchored |= ANCHOR_LEFT; - } - - /* - * Split domain into components - */ - url->dbuffer = strdup(host_pattern); - if (NULL == url->dbuffer) - { - free_url_spec(url); - return JB_ERR_MEMORY; - } - - /* - * Map to lower case - */ - for (p = url->dbuffer; *p ; p++) - { - *p = (char)tolower((int)(unsigned char)*p); - } - - /* - * Split the domain name into components - */ - url->dcount = ssplit(url->dbuffer, ".", v, SZ(v), 1, 1); - - if (url->dcount < 0) - { - free_url_spec(url); - return JB_ERR_MEMORY; - } - else if (url->dcount != 0) - { - /* - * Save a copy of the pointers in dvec - */ - size = (size_t)url->dcount * sizeof(*url->dvec); - - url->dvec = (char **)malloc(size); - if (NULL == url->dvec) - { - free_url_spec(url); - return JB_ERR_MEMORY; - } - - memcpy(url->dvec, v, size); - } - /* - * else dcount == 0 in which case we needn't do anything, - * since dvec will never be accessed and the pattern will - * match all domains. - */ - return JB_ERR_OK; -} - - -/********************************************************************* - * - * Function : simplematch - * - * Description : String matching, with a (greedy) '*' wildcard that - * stands for zero or more arbitrary characters and - * character classes in [], which take both enumerations - * and ranges. - * - * Parameters : - * 1 : pattern = pattern for matching - * 2 : text = text to be matched - * - * Returns : 0 if match, else nonzero - * - *********************************************************************/ -static int simplematch(const char *pattern, const char *text) -{ - const unsigned char *pat = (const unsigned char *)pattern; - const unsigned char *txt = (const unsigned char *)text; - const unsigned char *fallback = pat; - int wildcard = 0; - - unsigned char lastchar = 'a'; - unsigned i; - unsigned char charmap[32]; - - while (*txt) - { - - /* EOF pattern but !EOF text? */ - if (*pat == '\0') - { - if (wildcard) - { - pat = fallback; - } - else - { - return 1; - } - } - - /* '*' in the pattern? */ - if (*pat == '*') - { - - /* The pattern ends afterwards? Speed up the return. */ - if (*++pat == '\0') - { - return 0; - } - - /* Else, set wildcard mode and remember position after '*' */ - wildcard = 1; - fallback = pat; - } - - /* Character range specification? */ - if (*pat == '[') - { - memset(charmap, '\0', sizeof(charmap)); - - while (*++pat != ']') - { - if (!*pat) - { - return 1; - } - else if (*pat == '-') - { - if ((*++pat == ']') || *pat == '\0') - { - return(1); - } - for (i = lastchar; i <= *pat; i++) - { - charmap[i / 8] |= (unsigned char)(1 << (i % 8)); - } - } - else - { - charmap[*pat / 8] |= (unsigned char)(1 << (*pat % 8)); - lastchar = *pat; - } - } - } /* -END- if Character range specification */ - - - /* - * Char match, or char range match? - */ - if ( (*pat == *txt) - || (*pat == '?') - || ((*pat == ']') && (charmap[*txt / 8] & (1 << (*txt % 8)))) ) - { - /* - * Sucess: Go ahead - */ - pat++; - } - else if (!wildcard) - { - /* - * No match && no wildcard: No luck - */ - return 1; - } - else if (pat != fallback) - { - /* - * Increment text pointer if in char range matching - */ - if (*pat == ']') - { - txt++; - } - /* - * Wildcard mode && nonmatch beyond fallback: Rewind pattern - */ - pat = fallback; - /* - * Restart matching from current text pointer - */ - continue; - } - txt++; - } - - /* Cut off extra '*'s */ - if(*pat == '*') pat++; - - /* If this is the pattern's end, fine! */ - return(*pat); - -} - - -/********************************************************************* - * - * Function : simple_domaincmp - * - * Description : Domain-wise Compare fqdn's. The comparison is - * both left- and right-anchored. The individual - * domain names are compared with simplematch(). - * This is only used by domain_match. - * - * Parameters : - * 1 : pv = array of patterns to compare - * 2 : fv = array of domain components to compare - * 3 : len = length of the arrays (both arrays are the - * same length - if they weren't, it couldn't - * possibly be a match). - * - * Returns : 0 => domains are equivalent, else no match. - * - *********************************************************************/ -static int simple_domaincmp(char **pv, char **fv, int len) -{ - int n; - - for (n = 0; n < len; n++) - { - if (simplematch(pv[n], fv[n])) - { - return 1; - } - } - - return 0; - -} - - -/********************************************************************* - * - * Function : domain_match - * - * Description : Domain-wise Compare fqdn's. Governed by the bimap in - * pattern->unachored, the comparison is un-, left-, - * right-anchored, or both. - * The individual domain names are compared with - * simplematch(). - * - * Parameters : - * 1 : pattern = a domain that may contain a '*' as a wildcard. - * 2 : fqdn = domain name against which the patterns are compared. - * - * Returns : 0 => domains are equivalent, else no match. - * - *********************************************************************/ -static int domain_match(const struct url_spec *pattern, const struct http_request *fqdn) -{ - char **pv, **fv; /* vectors */ - int plen, flen; - int unanchored = pattern->unanchored & (ANCHOR_RIGHT | ANCHOR_LEFT); - - plen = pattern->dcount; - flen = fqdn->dcount; - - if (flen < plen) - { - /* fqdn is too short to match this pattern */ - return 1; - } - - pv = pattern->dvec; - fv = fqdn->dvec; - - if (unanchored == ANCHOR_LEFT) - { - /* - * Right anchored. - * - * Convert this into a fully anchored pattern with - * the fqdn and pattern the same length - */ - fv += (flen - plen); /* flen - plen >= 0 due to check above */ - return simple_domaincmp(pv, fv, plen); - } - else if (unanchored == 0) - { - /* Fully anchored, check length */ - if (flen != plen) - { - return 1; - } - return simple_domaincmp(pv, fv, plen); - } - else if (unanchored == ANCHOR_RIGHT) - { - /* Left anchored, ignore all extra in fqdn */ - return simple_domaincmp(pv, fv, plen); - } - else - { - /* Unanchored */ - int n; - int maxn = flen - plen; - for (n = 0; n <= maxn; n++) - { - if (!simple_domaincmp(pv, fv, plen)) - { - return 0; - } - /* - * Doesn't match from start of fqdn - * Try skipping first part of fqdn - */ - fv++; - } - return 1; - } - -} -#endif /* def FEATURE_EXTENDED_HOST_PATTERNS */ - - -/********************************************************************* - * - * Function : create_url_spec - * - * Description : Creates a "url_spec" structure from a string. - * When finished, free with free_url_spec(). - * - * Parameters : - * 1 : url = Target url_spec to be filled in. Will be - * zeroed before use. - * 2 : buf = Source pattern, null terminated. NOTE: The - * contents of this buffer are destroyed by this - * function. If this function succeeds, the - * buffer is copied to url->spec. If this - * function fails, the contents of the buffer - * are lost forever. - * - * Returns : JB_ERR_OK - Success - * JB_ERR_MEMORY - Out of memory - * JB_ERR_PARSE - Cannot parse regex (Detailed message - * written to system log) - * - *********************************************************************/ -jb_err create_url_spec(struct url_spec *url, char *buf) -{ - assert(url); - assert(buf); - - memset(url, '\0', sizeof(*url)); - - /* Remember the original specification for the CGI pages. */ - url->spec = strdup(buf); - if (NULL == url->spec) - { - return JB_ERR_MEMORY; - } - - /* Is it tag pattern? */ - if (0 == strncmpic("TAG:", url->spec, 4)) - { - /* The pattern starts with the first character after "TAG:" */ - const char *tag_pattern = buf + 4; - return compile_pattern(tag_pattern, NO_ANCHORING, url, &url->tag_regex); - } - - /* If it isn't a tag pattern it must be a URL pattern. */ - return compile_url_pattern(url, buf); -} - - -/********************************************************************* - * - * Function : free_url_spec - * - * Description : Called from the "unloaders". Freez the url - * structure elements. - * - * Parameters : - * 1 : url = pointer to a url_spec structure. - * - * Returns : N/A - * - *********************************************************************/ -void free_url_spec(struct url_spec *url) -{ - if (url == NULL) return; - - freez(url->spec); -#ifdef FEATURE_EXTENDED_HOST_PATTERNS - if (url->host_regex) - { - regfree(url->host_regex); - freez(url->host_regex); - } -#else - freez(url->dbuffer); - freez(url->dvec); - url->dcount = 0; -#endif /* ndef FEATURE_EXTENDED_HOST_PATTERNS */ - freez(url->port_list); - if (url->preg) - { - regfree(url->preg); - freez(url->preg); - } - if (url->tag_regex) - { - regfree(url->tag_regex); - freez(url->tag_regex); - } -} - - -/********************************************************************* - * - * Function : url_match - * - * Description : Compare a URL against a URL pattern. - * - * Parameters : - * 1 : pattern = a URL pattern - * 2 : url = URL to match - * - * Returns : Nonzero if the URL matches the pattern, else 0. - * - *********************************************************************/ -int url_match(const struct url_spec *pattern, - const struct http_request *http) -{ - /* XXX: these should probably be functions. */ -#define PORT_MATCHES ((NULL == pattern->port_list) || match_portlist(pattern->port_list, http->port)) -#ifdef FEATURE_EXTENDED_HOST_PATTERNS -#define DOMAIN_MATCHES ((NULL == pattern->host_regex) || (0 == regexec(pattern->host_regex, http->host, 0, NULL, 0))) -#else -#define DOMAIN_MATCHES ((NULL == pattern->dbuffer) || (0 == domain_match(pattern, http))) -#endif -#define PATH_MATCHES ((NULL == pattern->preg) || (0 == regexec(pattern->preg, http->path, 0, NULL, 0))) - - if (pattern->tag_regex != NULL) - { - /* It's a tag pattern and shouldn't be matched against URLs */ - return 0; - } - - return (PORT_MATCHES && DOMAIN_MATCHES && PATH_MATCHES); - -} - - -/********************************************************************* - * - * Function : match_portlist - * - * Description : Check if a given number is covered by a comma - * separated list of numbers and ranges (a,b-c,d,..) - * - * Parameters : - * 1 : portlist = String with list - * 2 : port = port to check - * - * Returns : 0 => no match - * 1 => match - * - *********************************************************************/ -int match_portlist(const char *portlist, int port) -{ - char *min, *max, *next, *portlist_copy; - - min = next = portlist_copy = strdup(portlist); - - /* - * Zero-terminate first item and remember offset for next - */ - if (NULL != (next = strchr(portlist_copy, (int) ','))) - { - *next++ = '\0'; - } - - /* - * Loop through all items, checking for match - */ - while(min) - { - if (NULL == (max = strchr(min, (int) '-'))) - { - /* - * No dash, check for equality - */ - if (port == atoi(min)) - { - freez(portlist_copy); - return(1); - } - } - else - { - /* - * This is a range, so check if between min and max, - * or, if max was omitted, between min and 65K - */ - *max++ = '\0'; - if(port >= atoi(min) && port <= (atoi(max) ? atoi(max) : 65535)) - { - freez(portlist_copy); - return(1); - } - - } - - /* - * Jump to next item - */ - min = next; - - /* - * Zero-terminate next item and remember offset for n+1 - */ - if ((NULL != next) && (NULL != (next = strchr(next, (int) ',')))) - { - *next++ = '\0'; - } - } - - freez(portlist_copy); - return 0; - -} - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/urlmatch.h b/external/privoxy/urlmatch.h deleted file mode 100644 index db5c60b..0000000 --- a/external/privoxy/urlmatch.h +++ /dev/null @@ -1,136 +0,0 @@ -#ifndef URLMATCH_H_INCLUDED -#define URLMATCH_H_INCLUDED -#define URLMATCH_H_VERSION "$Id: urlmatch.h,v 1.13 2009/03/02 19:18:11 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/urlmatch.h,v $ - * - * Purpose : Declares functions to match URLs against URL - * patterns. - * - * Copyright : Written by and Copyright (C) 2001-2002, 2006 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: urlmatch.h,v $ - * Revision 1.13 2009/03/02 19:18:11 fabiankeil - * Streamline parse_http_request()'s prototype. As - * cparser pointed out it doesn't actually use csp. - * - * Revision 1.12 2008/05/04 16:18:32 fabiankeil - * Provide parse_http_url() with a third parameter to specify - * whether or not URLs without protocol are acceptable. - * - * Revision 1.11 2008/05/04 13:30:55 fabiankeil - * Streamline parse_http_url()'s prototype. - * - * Revision 1.10 2008/04/14 18:11:21 fabiankeil - * The compiler might not notice it, but the buffer passed to - * create_url_spec() is modified later on and thus shouldn't - * be declared immutable. - * - * Revision 1.9 2008/04/08 16:07:39 fabiankeil - * Make it harder to mistake url_match()'s - * second parameter for an url_spec. - * - * Revision 1.8 2007/09/02 15:31:20 fabiankeil - * Move match_portlist() from filter.c to urlmatch.c. - * It's used for url matching, not for filtering. - * - * Revision 1.7 2007/01/06 14:24:38 fabiankeil - * Mark *csp as immutable for parse_http_url() - * and url_match(). - * - * Revision 1.6 2006/12/06 19:12:43 fabiankeil - * Added prototype for init_domain_components(). - * - * Revision 1.5 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.3 2002/03/26 22:29:55 swa - * we have a new homepage! - * - * Revision 1.2 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.1 2002/01/17 20:53:46 jongfoster - * Moving all our URL and URL pattern parsing code to the same file - it - * was scattered around in filters.c, loaders.c and parsers.c. - * - * Providing a single, simple url_match(pattern,url) function - rather than - * the 3-line match routine which was repeated all over the place. - * - * Renaming free_url to free_url_spec, since it frees a struct url_spec. - * - * Providing parse_http_url() so that URLs can be parsed without faking a - * HTTP request line for parse_http_request() or repeating the parsing - * code (both of which were techniques that were actually in use). - * - * Standardizing that struct http_request is used to represent a URL, and - * struct url_spec is used to represent a URL pattern. (Before, URLs were - * represented as seperate variables and a partially-filled-in url_spec). - * - * - *********************************************************************/ - - -#include "project.h" - -#ifdef __cplusplus -extern "C" { -#endif - -extern void free_http_request(struct http_request *http); -extern jb_err init_domain_components(struct http_request *http); -extern jb_err parse_http_request(const char *req, struct http_request *http); -extern jb_err parse_http_url(const char *url, - struct http_request *http, - int require_protocol); -#define REQUIRE_PROTOCOL 1 - -extern int url_match(const struct url_spec *pattern, - const struct http_request *http); - -extern jb_err create_url_spec(struct url_spec *url, char *buf); -extern void free_url_spec(struct url_spec *url); -extern int match_portlist(const char *portlist, int port); - - -/* Revision control strings from this header and associated .c file */ -extern const char urlmatch_rcs[]; -extern const char urlmatch_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef URLMATCH_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/user.action b/external/privoxy/user.action deleted file mode 100644 index 7b18dd9..0000000 --- a/external/privoxy/user.action +++ /dev/null @@ -1,169 +0,0 @@ -###################################################################### -# -# File : $Source: /cvsroot/ijbswa/current/user.action,v $ -# -# $Id: user.action,v 1.9 2008/03/27 18:27:37 fabiankeil Exp $ -# -# Purpose : User-maintained actions file, see -# http://www.privoxy.org/user-manual/actions-file.html -# -###################################################################### - -# This is the place to add your personal exceptions and additions to -# the general policies as defined in default.action. (Here they will be -# safe from updates to default.action.) Later defined actions always -# take precedence, so anything defined here should have the last word. - -# See http://www.privoxy.org/user-manual/actions-file.html, or the -# comments in default.action, for an explanation of what an "action" is -# and what each action does. - -# The examples included here either use bogus sites, or have the actual -# rules commented out (with the '#' character). Useful aliases are -# included in the top section as a convenience. - -############################################################################# -# Aliases -############################################################################# -{{alias}} -############################################################################# -# -# You can define a short form for a list of permissions - e.g., instead -# of "-crunch-incoming-cookies -crunch-outgoing-cookies -filter -fast-redirects", -# you can just write "shop". This is called an alias. -# -# Currently, an alias can contain any character except space, tab, '=', '{' -# or '}'. -# But please use only 'a'-'z', '0'-'9', '+', and '-'. -# -# Alias names are not case sensitive. -# -# Aliases beginning with '+' or '-' may be used for system action names -# in future releases - so try to avoid alias names like this. (e.g. -# "+crunch-all-cookies" below is not a good name) -# -# Aliases must be defined before they are used. -# -# These aliases just save typing later: -# -+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies --crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies - allow-all-cookies = -crunch-all-cookies -session-cookies-only -filter{content-cookies} - allow-popups = -filter{all-popups} -filter{unsolicited-popups} -+block-as-image = +block{Blocked image request.} +handle-as-image --block-as-image = -block - -# These aliases define combinations of actions -# that are useful for certain types of sites: -# -fragile = -block -crunch-all-cookies -filter -fast-redirects -hide-referer -prevent-compression -shop = -crunch-all-cookies allow-popups - -# Your favourite blend of filters: -# -myfilters = +filter{html-annoyances} +filter{js-annoyances} +filter{all-popups}\ - +filter{webbugs} +filter{banners-by-size} - -# Allow ads for selected useful free sites: -# -allow-ads = -block -filter{banners-by-size} -filter{banners-by-link} -#... etc. Customize to your heart's content. - -## end aliases ######################################################## -####################################################################### - -# Begin examples: ##################################################### - -# Say you have accounts on some sites that you visit regularly, and you -# don't want to have to log in manually each time. So you'd like to allow -# persistent cookies for these sites. The allow-all-cookies alias defined -# above does exactly that, i.e. it disables crunching of cookies in any -# direction, and the processing of cookies to make them only temporary. -# -{ allow-all-cookies } -#.sourceforge.net -#sunsolve.sun.com -#slashdot.org -#.yahoo.com -#.msdn.microsoft.com -#.redhat.com - -# Say the site where you do your homebanking needs to open popup -# windows, but you have chosen to kill popups uncoditionally by default. -# This will allow it for your-example-bank.com: -# -{ -filter{all-popups} } -.banking.example.com - -# Some hosts and some file types you may not want to filter for -# various reasons: -# -{ -filter } - -# Technical documentation is likely to contain strings that might -# erroneously get altered by the JavaScript-oriented filters: -# -#.tldp.org -#/(.*/)?selfhtml/ - -# And this stupid host sends streaming video with a wrong MIME type, -# so that Privoxy thinks it is getting HTML and starts filtering: -# -stupid-server.example.com/ - - -# Example of a simple "block" action. Say you've seen an ad on your -# favourite page on example.com that you want to get rid of. You have -# right-clicked the image, selected "copy image location" and pasted -# the URL below while removing the leading http://, into a { +block{reason} } -# section. Note that { +handle-as-image } need not be specified, since -# all URLs ending in .gif will be tagged as images by the general rules -# as set in default.action anyway: -# -{ +block{Nasty ads.} } -www.example.com/nasty-ads/sponsor.gif - -# The URLs of dynamically generated banners, especially from large banner -# farms, often don't use the well-known image file name extensions, which -# makes it impossible for Privoxy to guess the file type just by looking -# at the URL. -# You can use the +block-as-image alias defined above for these cases. -# Note that objects which match this rule but then turn out NOT to be an -# image are typically rendered as a "broken image" icon by the browser. -# Use cautiously. -# -{ +block-as-image } -#.doubleclick.net -#/Realmedia/ads/ -#ar.atwola.com/ - -# Now you noticed that the default configuration breaks Forbes -# Magazine, but you were too lazy to find out which action is the -# culprit, and you were again too lazy to give feedback, so you just -# used the fragile alias on the site, and -- whoa! -- it worked. The -# 'fragile' aliases disables those actions that are most likely to break -# a site. Also, good for testing purposes to see if it is Privoxy that -# is causing the problem or not. -# -{ fragile } -#.forbes.com - -# Here are some sites we wish to support, and we will allow their ads -# through. -# -{ allow-ads } -#.sourceforge.net -#.slashdot.org -#.osdn.net - -# user.action is generally the best place to define exceptions and -# additions to the default policies of default.action. Some actions are -# safe to have their default policies set here though. So let's set a -# default policy to have a 'blank' image as opposed to the checkerboard -# pattern for ALL sites. '/' of course matches all URLs. -# patterns: -# -{ +set-image-blocker{blank} } -#/ - -## set vi:nowrap tw=72 diff --git a/external/privoxy/user.filter b/external/privoxy/user.filter deleted file mode 100644 index 98de1c6..0000000 --- a/external/privoxy/user.filter +++ /dev/null @@ -1,75 +0,0 @@ -# ******************************************************************** -# -# File : $Source: /cvsroot/ijbswa/current/user.filter,v $ -# -# $Id: user.filter,v 1.3 2008/05/21 20:17:03 fabiankeil Exp $ -# -# Purpose : Rules to process the content of web pages -# -# Copyright : Written by and Copyright (C) 2006-2008 the -# Privoxy team. http://www.privoxy.org/ -# -# We value your feedback. However, to provide you with the best support, -# please note: -# -# * Use the support forum to get help: -# http://sourceforge.net/tracker/?group_id=11118&atid=211118 -# * Submit bugs only thru our bug forum: -# http://sourceforge.net/tracker/?group_id=11118&atid=111118 -# Make sure that the bug has not already been submitted. Please try -# to verify that it is a Privoxy bug, and not a browser or site -# bug first. If you are using your own custom configuration, please -# try the stock configs to see if the problem is a configuration -# related bug. And if not using the latest development snapshot, -# please try the latest one. Or even better, CVS sources. -# * Submit feature requests only thru our feature request forum: -# http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse -# -# For any other issues, feel free to use the mailing lists: -# http://sourceforge.net/mail/?group_id=11118 -# -# Anyone interested in actively participating in development and related -# discussions can join the appropriate mailing list here: -# http://sourceforge.net/mail/?group_id=11118. Archives are available -# here too. -# -################################################################################# -# -# Syntax: -# -# Generally filters start with a line like "FILTER: name description". -# They are then referrable from the actionsfile with +filter{name} -# -# FILTER marks a filter as content filter, other filter -# types are CLIENT-HEADER-FILTER, CLIENT-HEADER-TAGGER, -# SERVER-HEADER-FILTER and SERVER-HEADER-TAGGER. -# -# Inside the filters, write one Perl-Style substitution (job) per line. -# Jobs that precede the first FILTER: line are ignored. -# -# For Details see the pcrs manpage contained in this distribution. -# (and the perlre, perlop and pcre manpages) -# -# Note that you are free to choose the delimiter as you see fit. -# -# Note2: In addition to the Perl options gimsx, the following nonstandard -# options are supported: -# -# 'U' turns the default to ungreedy matching. Add ? to quantifiers to -# switch back to greedy. -# -# 'T' (trivial) prevents parsing for backreferences in the substitute. -# Use if you want to include text like '$&' in your substitute without -# quoting. -# -# 'D' (Dynamic) allows the use of variables. Supported variables are: -# $host, $origin (the IP address the request came from), $path and $url. -# -# Note that '$' is a bad choice as delimiter for dynamic filters as you -# might end up with unintended variables if you use a variable name -# directly after the delimiter. Variables will be resolved without -# escaping anything, therefore you also have to be careful not to chose -# delimiters that appear in the replacement text. For example '<' should -# be save, while '?' will sooner or later cause conflicts with $url. -# -################################################################################# diff --git a/external/privoxy/utils/changelog2doc.pl b/external/privoxy/utils/changelog2doc.pl deleted file mode 100755 index a12cb32..0000000 --- a/external/privoxy/utils/changelog2doc.pl +++ /dev/null @@ -1,66 +0,0 @@ -#!/usr/bin/perl - -# $Id: changelog2doc.pl,v 1.2 2008/09/26 16:49:09 fabiankeil Exp $ -# $Source: /cvsroot/ijbswa/current/utils/changelog2doc.pl,v $ - -# Filter to parse the ChangeLog and translate the changes for -# the most recent version into something that looks like markup -# for the documentation but still needs fine-tuning. - -use strict; -use warnings; - -my @entries; - -sub read_entries() { - my $section_reached = 0; - my $i = -1; - - while (<>) { - if (/^\*{3} /) { - last if $section_reached; - $section_reached = 1; - next; - } - next unless $section_reached; - next if /^\s*$/; - - if (/^-/) { - $i++; - $entries[$i] = ''; - } - s@^-?\s*@@; - - $entries[$i] .= $_; - } - print "Parsed " . @entries . " entries.\n"; -} - -sub generate_markup() { - my $markup = ''; - - $markup .= "<para>\n" . - " <itemizedlist>\n"; - - foreach my $entry (@entries) { - chomp $entry; - $entry =~ s@\n@\n @g; - $markup .= " <listitem>\n" . - " <para>\n" . - " " . $entry . "\n" . - " </para>\n" . - " </listitem>\n" - ; - } - $markup .= " </itemizedlist>\n" . - "</para>\n"; - - print $markup; -} - -sub main () { - read_entries(); - generate_markup(); -} - -main(); diff --git a/external/privoxy/utils/docbook2man/COPYING b/external/privoxy/utils/docbook2man/COPYING deleted file mode 100644 index d60c31a..0000000 --- a/external/privoxy/utils/docbook2man/COPYING +++ /dev/null @@ -1,340 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/external/privoxy/utils/docbook2man/docbook2man-spec.pl b/external/privoxy/utils/docbook2man/docbook2man-spec.pl deleted file mode 100644 index 4e6d484..0000000 --- a/external/privoxy/utils/docbook2man/docbook2man-spec.pl +++ /dev/null @@ -1,1229 +0,0 @@ -=head1 NAME - -docbook2man-spec - convert DocBook RefEntries to Unix manpages - -=head1 SYNOPSIS - -The SGMLSpm package from CPAN. This contains the sgmlspl script which -is used to grok this file. Use it like this: - -nsgmls some-docbook-document.sgml | sgmlspl docbook2man-spec.pl - -=head1 DESCRIPTION - -This is a sgmlspl spec file that produces Unix-style -manpages from RefEntry markup. - -See the accompanying RefEntry man page for 'plain new' documentation. :) - -=head1 LIMITATIONS - -Trying docbook2man on non-DocBook or non-conformant SGML results in -undefined behavior. :-) - -This program is a slow, dodgy Perl script. - -This program does not come close to supporting all the possible markup -in DocBook, and will produce wrong output in some cases with supported -markup. - -=head1 TODO - -Add new element handling and fix existing handling. Be robust. -Produce cleanest, readable man output as possible (unlike some -other converters). Follow Linux man(7) convention. -If this results in added logic in this script, -that's okay. The code should still be reasonably organized. - -Make it faster. If Perl sucks port it to another language. - -=head1 COPYRIGHT - -Copyright (C) 1998-1999 Steve Cheng <steve(a)ggi-project.org> - -This program is free software; you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the Free -Software Foundation; either version 2, or (at your option) any later -version. - -You should have received a copy of the GNU General Public License along with -this program; see the file COPYING. If not, please write to the Free -Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -=cut - -# $Id: docbook2man-spec.pl,v 1.4 2006/07/18 14:49:14 david__schmidt Exp $ - -use SGMLS; # Use the SGMLS package. -use SGMLS::Output; # Use stack-based output. -use SGMLS::Refs; - -######################################################################## -# SGMLSPL script produced automatically by the script sgmlspl.pl -# -# Document Type: any, but processes only RefEntries -# Edited by: me :) -######################################################################## - -$write_manpages = 0; -$blank_xrefs = 0; - -sgml('start', sub { - push_output('nul'); - $raw_cdata = 1; # Makes it a bit faster. - - # Links file - open(LINKSFILE, ">manpage.links"); - - $Refs = new SGMLS::Refs("manpage.refs"); -}); -sgml('end', sub { - close(LINKSFILE); - if($blank_xrefs) { - print STDERR "Warning: output contains unresolved XRefs\n"; - } -}); - - - - -######################################################################## -# -# Output helpers -# -######################################################################## - -# Our own version of sgml() and output() to allow simple string output -# to play well with roff's stupid whitespace rules. - -sub man_sgml -{ - if(ref($_[1]) eq 'CODE') { - return &sgml; - } - - my $s = $_[1]; - - $s =~ s/\\/\\\\/g; - $s =~ s/'/\\'/g; - - # \n at the beginning means start at beginning of line - if($s =~ s/^\n//) { - $sub = 'sub { output "\n" unless $newline_last++; '; - if($s eq '') { - sgml($_[0], eval('sub { output "\n" unless $newline_last++; }')); - } elsif($s =~ /\n$/) { - sgml($_[0], eval("sub { output \"\\n\" unless \$newline_last++; output '$s'; }")); - } else { - sgml($_[0], eval("sub { output \"\\n\" unless \$newline_last; output '$s'; \$newline_last = 0; }")); - } - } else { - if($s =~ /\n$/) { - sgml($_[0], eval("sub { output '$s'; \$newline_last = 1; }")); - } else { - sgml($_[0], eval("sub { output '$s'; \$newline_last = 0; }")); - } - } -} - -sub man_output -{ - $_ = shift; - if(s/^\n//) { - output "\n" unless $newline_last++; - } - return if $_ eq ''; - - output $_; - - if(@_) { - output @_; - $newline_last = (pop(@_) =~ /\n$/); - } else { - $newline_last = ($_ =~ /\n$/) - } -} - -# Fold lines into one, quote some characters -sub fold_string -{ - $_ = shift; - - s/\\/\\\\/g; - s/"/\\\&"/g; - - # Change tabs to spaces - tr/\t\n/ /; - - # Trim whitespace from beginning and end. - s/^ +//; - s/ +$//; - - return $_; -} - -sub save_cdata() -{ - $raw_cdata++; - push_output('string'); -} - -sub bold_on() -{ - # If the last font is also bold, don't change anything. - # Basically this is to just get more readable man output. - if($fontstack[$#fontstack] ne 'bold') { - if(!$raw_cdata) { - output '\fB'; - $newline_last = 0; - } - } - push(@fontstack, 'bold'); -} - -sub italic_on() -{ - # If the last font is also italic, don't change anything. - if($fontstack[$#fontstack] ne 'italic') { - if(!$raw_cdata) { - output '\fI'; - $newline_last = 0; - } - } - push(@fontstack, 'italic'); -} - -sub font_off() -{ - my $thisfont = pop(@fontstack); - my $lastfont = $fontstack[$#fontstack]; - - # Only output font change if it is different - if($thisfont ne $lastfont) { - if($raw_cdata) { return; } - elsif($lastfont eq 'bold') { output '\fB'; } - elsif($lastfont eq 'italic') { output '\fI'; } - else { output '\fR'; } - - $newline_last = 0; - } -} - - - - - - -######################################################################## -# -# Manpage management -# -######################################################################## - -sgml('<REFENTRY>', sub { - # This will be overwritten at end of REFMETA, when we know the name of the page. - pop_output(); - - $write_manpages = 1; # Currently writing manpage. - - $nocollapse_whitespace = 0; # Current whitespace collapse counter. - $newline_last = 1; # At beginning of line? - # Just a bit of warning, you will see this variable manipulated - # manually a lot. It makes the code harder to follow but it - # saves you from having to worry about collapsing at the end of - # parse, stopping at verbatims, etc. - $raw_cdata = 0; # Instructs certain output functions to - # leave CDATA alone, so we can assign - # it to a string and process it, etc. - @fontstack = (); # Fonts being activated. - - $manpage_title = ''; # Needed for indexing. - $manpage_sect = ''; - @manpage_names = (); - - $manpage_misc = ''; - - $list_nestlevel = 0; # Indent certain nested content. -}); -sgml('</REFENTRY>', sub { - if(!$newline_last) { - output "\n"; - } - - $write_manpages = 0; - $raw_cdata = 1; - push_output('nul'); -}); - -sgml('</REFMETA>', sub { - push_output('file', "$manpage_title.$manpage_sect"); - - output <<_END_BANNER; -.\\" This manpage has been automatically generated by docbook2man -.\\" from a DocBook document. This tool can be found at: -.\\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> -.\\" Please send any bug reports, improvements, comments, patches, -.\\" etc. to Steve Cheng <steve\(a)ggi-project.org>. -_END_BANNER - - my $manpage_date = `date "+%d %B %Y"`; - - output '.TH "'; - - # If the title is not mixed-case, convention says to - # uppercase the whole title. (The canonical title is - # lowercase.) - if($manpage_title =~ /[A-Z]/) { - output fold_string($manpage_title); - } else { - output uc(fold_string($manpage_title)); - } - - output '" "', fold_string($manpage_sect), - '" "', fold_string(`date "+%d %B %Y"`), - '" "', $manpage_misc, - '" "', $manpage_manual, - "\"\n"; - - $newline_last = 1; - - # References to this RefEntry. - my $id = $_[0]->parent->attribute('ID')->value; - if($id ne '') { - # The 'package name' part of the section should - # not be used when citing it. - my ($sectnum) = ($manpage_sect =~ /([0-9]*)/); - - if($_[0]->parent->attribute('XREFLABEL')->value eq '') { - $Refs->put("refentry:$id", "$manpage_title($sectnum)"); - } else { - $Refs->put("refentry:$id", - $_[0]->parent->attribute('XREFLABEL')->value . - "($sectnum)"); - } - } -}); - -sgml('<REFENTRYTITLE>', sub { - if($_[0]->in('REFMETA')) { - save_cdata(); - } else { - # Manpage citations are in bold. - bold_on(); - } -}); -sgml('</REFENTRYTITLE>', sub { - if($_[0]->in('REFMETA')) { - $raw_cdata--; - $manpage_title = pop_output(); - } - else { font_off(); } -}); - -sgml('<MANVOLNUM>', sub { - if($_[0]->in('REFMETA')) { - save_cdata(); - } else { - # Manpage citations use (). - output '('; - } -}); -sgml('</MANVOLNUM>', sub { - if($_[0]->in('REFMETA')) { - $raw_cdata--; - $manpage_sect = pop_output(); - } - else { output ')' } -}); - -sgml('<REFMISCINFO>', \&save_cdata); -sgml('</REFMISCINFO>', sub { - $raw_cdata--; - $manpage_misc = fold_string(pop_output()); -}); - - -# NAME section -man_sgml('<REFNAMEDIV>', "\n.SH NAME\n"); - -sgml('<REFNAME>', \&save_cdata); -sgml('</REFNAME>', sub { - $raw_cdata--; - push(@manpage_names, pop_output()); -}); - -sgml('<REFPURPOSE>', \&save_cdata); -sgml('</REFPURPOSE>', sub { - $raw_cdata--; - my $manpage_purpose = fold_string(pop_output()); - - for(my $i = 0; $i < $#manpage_names; $i++) { - output fold_string($manpage_names[$i]), ', '; - } - - output fold_string($manpage_names[$#manpage_names]); - output " \\- $manpage_purpose\n"; - - $newline_last = 1; - - foreach(@manpage_names) { - # Don't link to itself - if($_ ne $manpage_title) { - print LINKSFILE "$manpage_title.$manpage_sect $_.$manpage_sect\n"; - } - } -}); - -man_sgml('<REFCLASS>', "\n.sp\n"); - -#RefDescriptor - - - - - -######################################################################## -# -# SYNOPSIS section and synopses -# -######################################################################## - -man_sgml('<REFSYNOPSISDIV>', "\n.SH SYNOPSIS\n"); -man_sgml('</REFSYNOPSISDIV>', "\n"); - -## FIXME! Must be made into block elements!! -#sgml('<FUNCSYNOPSIS>', \&bold_on); -#sgml('</FUNCSYNOPSIS>', \&font_off); -#sgml('<CMDSYNOPSIS>', \&bold_on); -#sgml('</CMDSYNOPSIS>', \&font_off); - -man_sgml('<FUNCSYNOPSIS>', sub { - man_output("\n.sp\n"); - bold_on(); -}); -man_sgml('</FUNCSYNOPSIS>', sub { - font_off(); - man_output("\n"); -}); - -man_sgml('<CMDSYNOPSIS>', "\n\n"); -man_sgml('</CMDSYNOPSIS>', "\n\n"); - -man_sgml('<FUNCPROTOTYPE>', "\n.sp\n"); - -# Arguments to functions. This is C convention. -sub paramdef -{ - if($_[0]->parent->ext->{'inparams'}) { - output ', '; - } else { - output ' ('; - $_[0]->parent->ext->{'inparams'} = 1; - } -} -man_sgml('<PARAMDEF>', \&paramdef); -man_sgml('</FUNCPROTOTYPE>', ");\n"); -man_sgml('<VOID>', "(void"); -man_sgml('<VARARGS>', "(..."); - - - -sub group_start -{ - if(not $_[0]->parent->in('TERM')) { - if($_[0]->attribute('CHOICE')->value =~ /opt/i) { - output ' ['; - } elsif($_[0]->attribute('CHOICE')->value =~ /req/i) { - output ' {'; - } - } - $_[0]->ext->{'count'} = 1; -} -sub group_end -{ - if($_[0]->attribute('REP')->value =~ /^Repeat/i) { - italic_on(); - output ' ...'; - font_off(); - } - if(not $_[0]->parent->in('TERM')) { - if($_[0]->attribute('CHOICE')->value =~ /opt/i) { - output ' ]'; - } elsif($_[0]->attribute('CHOICE')->value =~ /req/i) { - output ' }'; - } - } -} - -sub arg_start -{ - # my $choice = $_[0]->attribute('CHOICE')->value; - - # The content model for CmdSynopsis doesn't include #PCDATA, - # so we won't see any of the whitespace in the source file, - # so we have to add it after each component. - output ' '; - - if($_[0]->in('GROUP')) { - output '| ' if $_[0]->parent->ext->{'count'} > 1; - $_[0]->parent->ext->{'count'}++; - } elsif($_[0]->attribute('CHOICE')->value =~ /opt/i) { - output '[ '; - } - bold_on(); -} -sub arg_end -{ - font_off(); - if($_[0]->attribute('REP')->value =~ /^Repeat/i) { - italic_on(); - output ' ...'; - font_off(); - } - if($_[0]->attribute('CHOICE')->value =~ /opt/i and - not $_[0]->in('GROUP')) { - output ' ]'; - } -} - -sgml('<ARG>', \&arg_start); -sgml('</ARG>', \&arg_end); -sgml('<GROUP>', \&group_start); -sgml('</GROUP>', \&group_end); - -sgml('<OPTION>', \&bold_on); -sgml('</OPTION>', \&font_off); - -man_sgml('<SBR>', "\n "); - - -######################################################################## -# -# General sections -# -######################################################################## - -# The name of the section is handled by TITLE. This just sets -# up the roff markup. -man_sgml('<REFSECT1>', "\n.SH "); -man_sgml('<REFSECT2>', "\n.SS "); -man_sgml('<REFSECT3>', "\n.SS "); - - -######################################################################## -# -# Titles, metadata. -# -######################################################################## - -sgml('<TITLE>', sub { - if($_[0]->in('REFERENCE') or $_[0]->in('BOOK')) { - $write_manpages = 1; - } - save_cdata(); -}); -sgml('</TITLE>', sub { - my $title = fold_string(pop_output()); - $raw_cdata--; - - if($_[0]->in('REFERENCE') or $_[0]->in('BOOK')) { - # We use TITLE of enclosing Reference or Book as manual name - $manpage_manual = $title; - $write_manpages = 0; - } - elsif(exists $_[0]->parent->ext->{'title'}) { - # By far the easiest case. Just fold the string as - # above, and then set the parent element's variable. - $_[0]->parent->ext->{'title'} = $title; - } - else { - # If the parent element's handlers are lazy, - # output the folded string for them :) - # We assume they want uppercase and a newline. - output '"', uc($title), "\"\n"; - $newline_last = 1; - } -}); - -sgml('<ATTRIBUTION>', sub { push_output('string') }); -sgml('</ATTRIBUTION>', sub { $_[0]->parent->ext->{'attribution'} = pop_output(); }); - - -# IGNORE. -sgml('<DOCINFO>', sub { push_output('nul'); }); -sgml('</DOCINFO>', sub { pop_output(); }); -sgml('<REFSECT1INFO>', sub { push_output('nul'); }); -sgml('</REFSECT1INFO>', sub { pop_output(); }); -sgml('<REFSECT2INFO>', sub { push_output('nul'); }); -sgml('</REFSECT2INFO>', sub { pop_output(); }); -sgml('<REFSECT3INFO>', sub { push_output('nul'); }); -sgml('</REFSECT3INFO>', sub { pop_output(); }); - -sgml('<INDEXTERM>', sub { push_output('nul'); }); -sgml('</INDEXTERM>', sub { pop_output(); }); - - -######################################################################## -# -# Set bold on enclosed content -# -######################################################################## - -sgml('<APPLICATION>', \&bold_on); sgml('</APPLICATION>', \&font_off); - -sgml('<CLASSNAME>', \&bold_on); sgml('</CLASSNAME>', \&font_off); -sgml('<STRUCTNANE>', \&bold_on); sgml('</STRUCTNAME>', \&font_off); -sgml('<STRUCTFIELD>', \&bold_on); sgml('</STRUCTFIELD>', \&font_off); -sgml('<SYMBOL>', \&bold_on); sgml('</SYMBOL>', \&font_off); -sgml('<TYPE>', \&bold_on); sgml('</TYPE>', \&font_off); - -sgml('<ENVAR>', \&bold_on); sgml('</ENVAR>', \&font_off); - -sgml('<FUNCTION>', \&bold_on); sgml('</FUNCTION>', \&font_off); - -sgml('<EMPHASIS>', \&bold_on); sgml('</EMPHASIS>', \&font_off); - -sgml('<ERRORNAME>', \&bold_on); sgml('</ERRORNAME>', \&font_off); -# ERRORTYPE - -sgml('<COMMAND>', \&bold_on); sgml('</COMMAND>', \&font_off); - -sgml('<GUIBUTTON>', \&bold_on); sgml('</GUIBUTTON>', \&font_off); -sgml('<GUIICON>', \&bold_on); sgml('</GUIICON>', \&font_off); -# GUILABEL -# GUIMENU -# GUIMENUITEM -# GUISUBMENU -# MENUCHOICE -# MOUSEBUTTON - -sgml('<ACCEL>', \&bold_on); sgml('</ACCEL>', \&font_off); -sgml('<KEYCAP>', \&bold_on); sgml('</KEYCAP>', \&font_off); -sgml('<KEYSYM>', \&bold_on); sgml('</KEYSYM>', \&font_off); -# KEYCODE -# KEYCOMBO -# SHORTCUT - -sgml('<USERINPUT>', \&bold_on); sgml('</USERINPUT>', \&font_off); - -sgml('<INTERFACEDEFINITION>', \&bold_on); -sgml('</INTERFACEDEFINITION>', \&font_off); - -# May need to look at the CLASS -sgml('<SYSTEMITEM>', \&bold_on); -sgml('</SYSTEMITEM>', \&font_off); - - - - - -######################################################################## -# -# Set italic on enclosed content -# -######################################################################## - -sgml('<FIRSTTERM>', \&italic_on); sgml('</FIRSTTERM>', \&font_off); - -sgml('<FILENAME>', \&italic_on); sgml('</FILENAME>', \&font_off); -sgml('<PARAMETER>', \&italic_on); sgml('</PARAMETER>', \&font_off); -sgml('<PROPERTY>', \&italic_on); sgml('</PROPERTY>', \&font_off); - -sgml('<REPLACEABLE>', sub { - italic_on(); - if($_[0]->in('TOKEN')) { - # When tokenizing, follow more 'intuitive' convention - output "<"; - } -}); -sgml('</REPLACEABLE>', sub { - if($_[0]->in('TOKEN')) { - output ">"; - } - font_off(); -}); - -sgml('<CITETITLE>', \&italic_on); sgml('</CITETITLE>', \&font_off); -sgml('<FOREIGNPHRASE>', \&italic_on); sgml('</FOREIGNPHRASE>', \&font_off); - -sgml('<LINEANNOTATION>', \&italic_on); sgml('</LINEANNOTATION>', \&font_off); - - - - - - -######################################################################## -# -# Other 'inline' elements -# -######################################################################## - -man_sgml('<EMAIL>', '<'); -man_sgml('</EMAIL>', '>'); -man_sgml('<OPTIONAL>', '['); -man_sgml('</OPTIONAL>', ']'); - -man_sgml('</TRADEMARK>', "\\u\\s-2TM\\s+2\\d"); - -man_sgml('<COMMENT>', "[Comment: "); -man_sgml('</COMMENT>', "]"); - -man_sgml('<QUOTE>', "``"); -man_sgml('</QUOTE>', "''"); - -#man_sgml('<LITERAL>', '"'); -#man_sgml('</LITERAL>', '"'); - -# No special presentation: - -# AUTHOR -# AUTHORINITIALS - -# ABBREV -# ACTION -# ACRONYM -# ALT -# CITATION -# PHRASE -# QUOTE -# WORDASWORD - -# COMPUTEROUTPUT -# MARKUP -# PROMPT -# RETURNVALUE -# SGMLTAG -# TOKEN - -# DATABASE -# HARDWARE -# INTERFACE -# MEDIALABEL - -# There doesn't seem to be a good way to represent LITERAL in -man - - - -######################################################################## -# -# Paragraph and paragraph-like elements -# -######################################################################## - -sub para_start { - output "\n" unless $newline_last++; - - # In lists, etc., don't start paragraph with .PP since - # the indentation will be gone. - - if($_[0]->parent->ext->{'nobreak'}==1) { - # Usually this is the FIRST element of - # a hanging tag, so we MUST not do a full - # paragraph break. - $_[0]->parent->ext->{'nobreak'} = 2; - } elsif($_[0]->parent->ext->{'nobreak'}==2) { - # Usually these are the NEXT elements of - # a hanging tag. If we break using a blank - # line, we're okay. - output "\n"; - } else { - # Normal case. (For indented blocks too, at least - # -man isn't so braindead in this area.) - output ".PP\n"; - } -} -# Actually applies to a few other block elements as well -sub para_end { - output "\n" unless $newline_last++; -} - -sgml('<PARA>', \&para_start); -sgml('</PARA>', \&para_end); -sgml('<SIMPARA>', \&para_start); -sgml('</SIMPARA>', \&para_end); - -# Nothing special, except maybe FIXME set nobreak. -sgml('<INFORMALEXAMPLE>', \&para_start); -sgml('</INFORMALEXAMPLE>', \&para_end); - - - - - -######################################################################## -# -# Blocks using SS sections -# -######################################################################## - -# FIXME: We need to consider the effects of SS -# in a hanging tag :( - -# Complete with the optional-title dilemma (again). -sgml('<ABSTRACT>', sub { - $_[0]->ext->{'title'} = 'ABSTRACT'; - output "\n" unless $newline_last++; - push_output('string'); -}); -sgml('</ABSTRACT>', sub { - my $content = pop_output(); - - # As ABSTRACT is never on the same level as RefSect1, - # this leaves us with only .SS in terms of -man macros. - output ".SS \"", uc($_[0]->ext->{'title'}), "\"\n"; - - output $content; - output "\n" unless $newline_last++; -}); - -# Ah, I needed a break. Example always has a title. -man_sgml('<EXAMPLE>', "\n.SS "); -sgml('</EXAMPLE>', \&para_end); - -# Same with sidebar. -man_sgml('<SIDEBAR>', "\n.SS "); -sgml('</SIDEBAR>', \&para_end); - -# NO title. -man_sgml('<HIGHLIGHTS>', "\n.SS HIGHLIGHTS\n"); -sgml('</HIGHLIGHTS>', \&para_end); - - - - -######################################################################## -# -# Indented 'Block' elements -# -######################################################################## - -sub indent_block_start -{ - output "\n" unless $newline_last++; - output ".sp\n.RS\n"; -} -sub indent_block_end -{ - output "\n" unless $newline_last++; - output ".RE\n"; -} - -# This element is almost like an admonition (below), -# only the default title is blank :) - -sgml('<BLOCKQUOTE>', sub { - $_[0]->ext->{'title'} = ''; - output "\n" unless $newline_last++; - push_output('string'); -}); -sgml('</BLOCKQUOTE>', sub { - my $content = pop_output(); - - indent_block_start(); - - if($_[0]->ext->{'title'}) { - output ".B \"", $_[0]->ext->{'title'}, ":\"\n"; - } - - output $content; - - if($_[0]->ext->{'attribution'}) { - output "\n" unless $newline_last++; - # One place where roff's space-sensitivity makes sense :) - output "\n -- "; - output $_[0]->ext->{'attribution'} . "\n"; - } - - indent_block_end(); -}); - -# Set off admonitions from the rest of the text by indenting. -# FIXME: Need to check if this works inside paragraphs, not enclosing them. -sub admonition_end { - my $content = pop_output(); - - indent_block_start(); - - # When the admonition is only one paragraph, - # it looks nicer if the title was inline. - my $num_para; - while ($content =~ /^\.PP/gm) { $num_para++ } - if($num_para==1) { - $content =~ s/^\.PP\n//; - } - - output ".B \"" . $_[0]->ext->{'title'} . ":\"\n"; - output $content; - - indent_block_end(); -} - -sgml('<NOTE>', sub { - # We can't see right now whether or not there is a TITLE - # element, so we have to save the output now and add it back - # at the end of this admonition. - $_[0]->ext->{'title'} = 'Note'; - - # Although admonition_end's indent_block_start will do this, - # we need to synchronize the output _now_ - output "\n" unless $newline_last++; - - push_output('string'); -}); -sgml('</NOTE>', \&admonition_end); - -# Same as above. -sgml('<WARNING>', sub { - $_[0]->ext->{'title'} = 'Warning'; - output "\n" unless $newline_last++; - push_output('string'); -}); -sgml('</WARNING>', \&admonition_end); - -sgml('<TIP>', sub { - $_[0]->ext->{'title'} = 'Tip'; - output "\n" unless $newline_last++; - push_output('string'); -}); -sgml('</TIP>', \&admonition_end); -sgml('<CAUTION>', sub { - $_[0]->ext->{'title'} = 'Caution'; - output "\n" unless $newline_last++; - push_output('string'); -}); -sgml('</CAUTION>', \&admonition_end); - -sgml('<IMPORTANT>', sub { - $_[0]->ext->{'title'} = 'Important'; - output "\n" unless $newline_last++; - push_output('string'); -}); -sgml('</IMPORTANT>', \&admonition_end); - - - - - - - - - - - - -######################################################################## -# -# Verbatim displays. -# -######################################################################## - -sub verbatim_start { - output "\n" unless $newline_last++; - - if($_[0]->parent->ext->{'nobreak'}==1) { - # Usually this is the FIRST element of - # a hanging tag, so we MUST not do a full - # paragraph break. - $_[0]->parent->ext->{'nobreak'} = 2; - } else { - output "\n"; - } - - output(".nf\n") unless $nocollapse_whitespace++; -} - -sub verbatim_end { - output "\n" unless $newline_last++; - output(".fi\n") unless --$nocollapse_whitespace; -} - -sgml('<PROGRAMLISTING>', \&verbatim_start); -sgml('</PROGRAMLISTING>', \&verbatim_end); - -sgml('<SCREEN>', \&verbatim_start); -sgml('</SCREEN>', \&verbatim_end); - -sgml('<LITERALLAYOUT>', \&verbatim_start); -sgml('</LITERALLAYOUT>', \&verbatim_end); - -#sgml('<SYNOPSIS>', sub { -# if($_[0]->attribute('FORMAT')->value =~ /linespecific/i) { -# &verbatim_start; -# } else { -# roffcmd(""); -# } -#}); -# -#sgml('</SYNOPSIS>', sub { -# if($_[0]->attribute('FORMAT')->value =~ /linespecific/i) { -# &verbatim_end; -# } -# else { -# roffcmd("");# not sure about this. -# } -#}); -sgml('<SYNOPSIS>', \&verbatim_start); -sgml('</SYNOPSIS>', \&verbatim_end); - - - - - - - - - -######################################################################## -# -# Lists -# -######################################################################## - -# Indent nested lists. -sub indent_list_start { - if($list_nestlevel++) { - output "\n" unless $newline_last++; - output ".RS\n"; - } -} -sub indent_list_end { - if(--$list_nestlevel) { - output "\n" unless $newline_last++; - output ".RE\n"; - } -} - -sgml('<VARIABLELIST>', \&indent_list_start); -sgml('</VARIABLELIST>', \&indent_list_end); -sgml('<ITEMIZEDLIST>', \&indent_list_start); -sgml('</ITEMIZEDLIST>', \&indent_list_end); -sgml('<ORDEREDLIST>', sub { - indent_list_start(); - $_[0]->ext->{'count'} = 1; -}); -sgml('</ORDEREDLIST>', \&indent_list_end); -sgml('<GLOSSLIST>', \&indent_list_start); -sgml('</GLOSSLIST>', \&indent_list_end); - -# Output content on one line, bolded. -sgml('<TERM>', sub { - output "\n" unless $newline_last++; - output ".TP\n"; - bold_on(); - push_output('string'); -}); -sgml('</TERM>', sub { - my $term = pop_output(); - $term =~ tr/\n/ /; - output $term; - font_off(); - output "\n"; - $newline_last = 1; -}); -sgml('<GLOSSTERM>', sub { - output "\n" unless $newline_last++; - output ".TP\n"; - bold_on(); - push_output('string'); -}); -sgml('</GLOSSTERM>', sub { - my $term = pop_output(); - $term =~ tr/\n/ /; - output $term; - font_off(); - output "\n"; - $newline_last = 1; -}); - -sgml('<LISTITEM>', sub { - # A bulleted list. - if($_[0]->in('ITEMIZEDLIST')) { - output "\n" unless $newline_last++; - output ".TP 0.2i\n\\(bu\n"; - } - - # Need numbers. - # Assume Arabic numeration for now. - elsif($_[0]->in('ORDEREDLIST')) { - output "\n" unless $newline_last++; - output ".TP 3\n", $_[0]->parent->ext->{'count'}++, ". \n"; - } - - $_[0]->ext->{'nobreak'} = 1; -}); -sgml('<GLOSSDEF>', sub { - $_[0]->ext->{'nobreak'} = 1; -}); - -sgml('<SIMPLELIST>', sub { - $_[0]->ext->{'first_member'} = 1; -}); - -sgml('<MEMBER>', sub { - my $parent = $_[0]->parent; - - if($parent->attribute('TYPE')->value =~ /Inline/i) { - if($parent->ext->{'first_member'}) { - # If this is the first member don't put any commas - $parent->ext->{'first_member'} = 0; - } else { - output ", "; - } - } elsif($parent->attribute('TYPE')->value =~ /Vert/i) { - output "\n" unless $newline_last++; - output "\n"; - } -}); - - - - - -######################################################################## -# -# Stuff we don't know how to handle (yet) -# -######################################################################## - -# Address blocks: - -# Credit stuff: -# ACKNO -# ADDRESS -# AFFILIATION -# ARTPAGENUMS -# ATTRIBUTION -# AUTHORBLURB -# AUTHORGROUP -# OTHERCREDIT -# HONORIFIC - -# Areas: -# AREA -# AREASET -# AREASPEC - - - - - -######################################################################## -# -# Linkage, cross references -# -######################################################################## - -# Print the URL -sgml('</ULINK>', sub { - output ' <URL:', $_[0]->attribute('URL')->value, '>'; - $newline_last = 0; -}); - -# If cross reference target is a RefEntry, -# output CiteRefEntry-style references. -sgml('<XREF>', sub { - my $id = $_[0]->attribute('LINKEND')->value; - my $manref = $Refs->get("refentry:$id"); - - if($manref) { - my ($title, $sect) = ($manref =~ /(.*)($.*$)/); - bold_on(); - output $title; - font_off(); - output $sect; - } else { - $blank_xrefs++ if $write_manpages; - output "[XRef to $id]"; - } - - $newline_last = 0; -}); - -# Anchor - - - - -######################################################################## -# -# Other handlers -# -######################################################################## - -man_sgml('|[lt ]|', '<'); -man_sgml('|[gt ]|', '>'); -man_sgml('|[amp ]|', '&'); - -# -# Default handlers (uncomment these if needed). Right now, these are set -# up to gag on any unrecognised elements, sdata, processing-instructions, -# or entities. -# -# sgml('start_element',sub { die "Unknown element: " . $_[0]->name; }); -# sgml('end_element',''); - -# This is for weeding out and escaping certain characters. -# This looks like it's inefficient since it's done on every line, but -# in reality, SGMLSpm and sgmlspl parsing ESIS takes _much_ longer. - -sgml('cdata', sub -{ - if(!$write_manpages) { return; } - elsif($raw_cdata) { output $_[0]; return; } - - # Escape backslashes - $_[0] =~ s/\\/\\\\/g; - - # In non-'pre'-type elements: - if(!$nocollapse_whitespace) { - # Change tabs to spaces - $_[0] =~ tr/\t/ /; - - # Do not allow indents at beginning of line - # groff chokes on that. - if($newline_last) { - $_[0] =~ s/^ +//; - - # If the line is all blank, don't do anything. - if($_[0] eq '') { return; } - - $_[0] =~ s/^\./\\\&\./; - - # Argh... roff doesn't like ' either... - $_[0] =~ s/^\'/\\\&\'/; - } - } - - $newline_last = 0; - - output $_[0]; -}); - - -# When in whitespace-collapsing mode, we disallow consecutive newlines. - -sgml('re', sub -{ - if($nocollapse_whitespace || !$newline_last) { - output "\n"; - } - - $newline_last = 1; -}); - -sgml('sdata',sub -{ - if($_[0] =~ /\[minus \]/) { output "-"; } - elsif($_[0] =~ /\[copy \]/) { output "(C)"; } - elsif($_[0] =~ /\[nbsp \]/) { output " "; } - else { die "Unknown SDATA: " . $_[0]; } -}); -sgml('pi',sub { die "Unknown processing instruction: " . $_[0]; }); -sgml('entity',sub { die "Unknown external entity: " . $_[0]->name; }); -sgml('start_subdoc',sub { die "Unknown subdoc entity: " . $_[0]->name; }); -sgml('end_subdoc',''); -sgml('conforming',''); - -1; - diff --git a/external/privoxy/utils/docbook2man/docbook2man-spec.pl.1 b/external/privoxy/utils/docbook2man/docbook2man-spec.pl.1 deleted file mode 100644 index 4d2bf3b..0000000 --- a/external/privoxy/utils/docbook2man/docbook2man-spec.pl.1 +++ /dev/null @@ -1,99 +0,0 @@ -.\" This manpage has been automatically generated by docbook2man -.\" from a DocBook document. This tool can be found at: -.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> -.\" Please send any bug reports, improvements, comments, patches, -.\" etc. to Steve Cheng <steve(a)ggi-project.org>. -.TH "DOCBOOK2MAN-SPEC.PL" "1" "27 June 2002" "" "" -.SH NAME -docbook2man-spec.pl \- convert DocBook RefEntries to man pages -.SH SYNOPSIS - -\fBsgmlspl\fR \fBdocbook2man-spec.pl\fR - - -\fBnsgmls\fR [ \fB\fIsgml document\fB\fR ]\fB| sgmlspl\fR \fBdocbook2man-spec.pl\fR - -.SH "DESCRIPTION" -.PP -\fBdocbook2man\fR is a sgmlspl spec file that produced man -pages (using the -man macros) from DocBook RefEntry markup. -.PP -The program reads ESIS produced by nsgmls (or other SGML parsers) from -standard input. Markup not found in RefEntry is discarded. -.PP -Its output, the converted man pages, are written to the current directory. If -RefMeta information is not specified in a -RefEntry, then the man page will be written to standard -output. -.PP -The file \fImanpage.links\fR will also be created, which contains -any aliases of the manpages generated. This file is in the format: - -.nf -\fI<man page>\fR \fI<alias -manpage>\fR -.fi -.PP -The \fImanpage.refs\fR file keeps track of -XRef references. Note that if the input document has any -forward references, then \fBdocbook2man\fR may have to be -invoked twice (the first time updating \fImanpage.refs\fR) to -resolve them. -.SH "REQUIREMENTS" - -The SGMLSpm package from CPAN. This package includes the sgmlspl script -that is also needed. -.SH "LIMITATIONS" -.PP -Trying \fBdocbook2man\fR on non-DocBook or non-conformant -SGML results in undefined behavior. :-) -.PP -This program is a slow, dodgy Perl script. -.PP -This program does not come close to supporting all the possible markup -in DocBook, and may produce wrong output in some cases with supported -markup. -.SH "TO DO" -.PP -Obvious stuff: -.TP 0.2i -\(bu -Fix \fBdocbook2man\fR breakages found in -the test documents, especially -\fIweird.sgml\fR. -.TP 0.2i -\(bu -Add new element handling and fix existing handling. -Be robust. -.TP 0.2i -\(bu -Produce cleanest, readable man output as possible (unlike some -other converters). Follow Linux -\fBman\fR(7) -convention. As conversion to man pages is usually not done very often, it is -better to be slower/more complicated than to produce wrong output. Also if -someone wants to give up using DocBook for whatever reason, the last-converted -man pages can then be maintained manually. -.TP 0.2i -\(bu -Make it faster. I think most of the speed problems so far is with parsing -ESIS. Rewrite \fISGMLS.pm\fR with C and/or get input directly -from \fBSP\fR. -.TP 0.2i -\(bu -Support other (human) languages. But what to do with non-ASCII charsets? -SGMLSpm doesn't report them and \fBroff\fR does not grok them. -[Comment: text after enclosed lists (and SS blocks) will break docbook2man] -If we do this, more people can use DocBook. -.SH "COPYRIGHT" -.PP -Copyright (C) 1998-1999 Steve Cheng <steve(a)ggi-project.org> -.PP -This program is free software; you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the -Free Software Foundation; either version 2, or (at your option) any -later version. -.PP -You should have received a copy of the GNU General Public License along with -this program; see the file \fICOPYING\fR. If not, please write -to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. diff --git a/external/privoxy/utils/filter2docs.pl b/external/privoxy/utils/filter2docs.pl deleted file mode 100755 index b47e92e..0000000 --- a/external/privoxy/utils/filter2docs.pl +++ /dev/null @@ -1,81 +0,0 @@ -#!/usr/bin/perl - -# $Id: filter2docs.pl,v 1.6 2009/01/13 16:48:09 fabiankeil Exp $ -# $Source: /cvsroot/ijbswa/current/utils/filter2docs.pl,v $ - -# Parse the filter names and descriptions from a filter file and -# spit out copy&paste-ready markup for the various places in -# configuration and documentation where all filters are listed. - -use strict; -use warnings; - -my (%comment_lines, %action_lines, %sgml_source_1, %sgml_source_2); - -sub main() { - - die "Usage: $0 filter-file\n" unless (@ARGV == 1) ; - open(INPUT, "< $ARGV[0]") or die "Coudln't open input file $ARGV[0] because $!\n"; - - parse_file(); - print_markup(); -} - -sub parse_file() { - while (<INPUT>) { - if (/^((?:(?:SERVER|CLIENT)-HEADER-)?(?:FILTER|TAGGER)): ([-\w]+) (.*)$/) { - my $type_uc = $1; - my $name = $2; - my $description = $3; - my $type = lc($type_uc); - - my $white_space = ' ' x (($type eq 'filter' ? 20 : 27) - length($name)); - - $comment_lines{$type} .= "# $name:" . $white_space . "$description\n"; - $action_lines{$type} .= "+$type" . "{$name} \\\n"; - $sgml_source_1{$type} .= " <para>\n <anchor id=\"$type-$name\">\n" . - " <screen>+$type" . "{$name}" . $white_space . - "# $description</screen>\n </para>\n"; - $sgml_source_2{$type} .= ' -<link linkend="' . $type_uc . "-" . - uc($name) . "\">$type" . "{$name}</link> \\\n"; - } - } -} - -sub print_markup() { - - my @filter_types = ( - 'filter', - 'server-header-filter', - 'client-header-filter', - 'server-header-tagger', - 'client-header-tagger' - ); - - foreach my $type (@filter_types) { - - next unless defined $action_lines{$type}; - - print "=" x 90; - - print <<" DOCMARKUP"; - -Producing $type markup: - -Comment lines for default.action: - -$comment_lines{$type} -Block of $type actions for default.action: - -$action_lines{$type} -SGML Source for AF chapter in U-M: - -$sgml_source_1{$type} -SGML Source for AF Tutorial chapter in U-M: - -$sgml_source_2{$type} - DOCMARKUP - } -} - -main(); diff --git a/external/privoxy/utils/ldp_print/README b/external/privoxy/utils/ldp_print/README deleted file mode 100644 index 833ae0b..0000000 --- a/external/privoxy/utils/ldp_print/README +++ /dev/null @@ -1,80 +0,0 @@ - -###################################################################### - ldp_print - print tool/script for DocBook SGML/XML documents -###################################################################### - - Copyright (C) 2002-2000 - Greg Ferguson (gferg(a)metalab.unc.edu) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -###################################################################### - -This process/script is used in the production environment for the -LDP. It relies on the HTMLDOC software package (GPL'ed) which can be -obtained from the Easy Software Products (c) web site: - - http://www.easysw.com/htmldoc/ - -This process creates a PDF variant from the single-file HTML -representation of a DocBook SGML (or XML) instance. The simple -wrapper script (ldp_print) assumes that the file was created using -{open}jade in a manner similar to: - - jade -t sgml -i html -V nochunks -d $style $fname > $fname.html - -Give the script the filename as an argument. It will then parse the -file into 'title.html' and 'body.html' and send each to htmldoc (as -the corresponding title page and body of the document). - - -CAVEATS -======= - -o Assumes perl is in /usr/bin; adjust if necessary - -o You may need to specify where the htmldoc executable resides. - The script assumes it's within your $PATH. - -o If you want Postscript as an output variant, uncomment the - appropriate lines (see below). - -o Relies on output from a DocBook instance created via DSSSL/{open}jade! - -o Cleans up (removes) the intermediate files it creates (but not the - PDF or Postscript files, obviously!) - -o Works silently; PDF (PostScript) will be created in the same directory - as was specified for the input (single-file HTML) file. - -o Provided without warranty or support! - -o I ran into a problem with htmldoc v1.8.8 which required a source - code change (I was getting a core dump from the htmldoc process). - Here is the change required: - - htmldoc/ps-pdf.cxx : - 3662,3665d3661 - < /* gjf = 11Oct2000 */ - < if( temprow == NULL ) - < break; - < - - UPDATE (2001-10-10): It appears that later versions of htmldoc - have this problem corrected. The patch is not required. - -==== -Greg Ferguson / gferg (at) metalab.unc.edu -11 Jan 2000 - diff --git a/external/privoxy/utils/ldp_print/VERSION b/external/privoxy/utils/ldp_print/VERSION deleted file mode 100644 index 8f00eb7..0000000 --- a/external/privoxy/utils/ldp_print/VERSION +++ /dev/null @@ -1 +0,0 @@ -0.7.0, 2002-04-04 diff --git a/external/privoxy/utils/ldp_print/fix_print_html.lib b/external/privoxy/utils/ldp_print/fix_print_html.lib deleted file mode 100644 index fdb9ab4..0000000 --- a/external/privoxy/utils/ldp_print/fix_print_html.lib +++ /dev/null @@ -1,227 +0,0 @@ -# -# fix_print_html.lib -# -# Dan Scott / <dan.scott (at) acm.org> -# Ferg / <gferg (at) sgi.com> -# -# Used to prepare single-file HTML variant for PDF/Postscript creation -# thru htmldoc. -# -# log: -# 16Oct2000 - 0.1 - initial entry <gferg (at) sgi.com> -# 03Apr2001 - 0.2 - fix for <preface> -# 05Jul2001 - 0.3 - fix for <tt> and -f -# 12Oct2001 - 0.4 - fix for sections; loop thru both files (body/title) -# 27Nov2001 - 0.5 - fixed bug in determining where doc-index lies -# 18Jan2002 - 0.5.1 - entity fix (822*) -# 02Apr2002 - 0.6 - misc fixes (bibliography/appendix, etc). -# 04Apr2002 - 0.7 - fix for newer DSSSL -# - -sub fix_print_html { - - my($in,$out,$ttl) = @_; - - open(IN_FILE, "< $in") || do { - print "fix_print_html: cannot open $in: $!\n"; - return 0; - }; - - my($buf, $ttl_buf) = ''; - my($indx) = -1; - my($is_article) = 1; - while(<IN_FILE>) { - - if( $indx == 1 ) { - - # ignore everything until we see the chapter or sect - # - if( $_ =~ /CLASS="CHAP/i || $_ =~ /CLASS="PREF/i - || - $_ =~ /CLASS="SECT/i ) { - - $buf .= $_; - $indx++; - - } else { - next; - } - - } elsif( $indx == 0 ) { - - # write out the title page file - # - if( $_ =~ /CLASS="TOC"/ ) { - - $ttl_buf .= "></DIV>\n</BODY>\n</HTML>\n"; - $ttl_buf =~ s/<\/H1\n/<\/H1\n><P><BR><BR\n/ms; - $ttl_buf =~ s/<HR><\/DIV\n><HR>/<HR><\/DIV\n>/ms; - &fix_html(\$ttl_buf, 1); - - open(TOC_FILE, "> $ttl") || do { - print "fix_print_html: cannot open $ttl: $!\n"; - close(IN_FILE); - return 0; - }; - print TOC_FILE $ttl_buf; - close(TOC_FILE); - $ttl_buf = ''; - $indx++; - - } else { - $ttl_buf .= $_; - } - - } elsif( $indx < 0 ) { - - if( $_ =~ /CLASS="BOOK"/i ) { - $is_article = 0; - } - - # up to this point, both buffers get the line - # - if( $_ =~ /CLASS="TITLEPAGE"/ ) { - - $ttl_buf .= $_ . ">\n<P>\n<BR><BR><BR><BR>\n<\/P\n"; - $indx++; - - } else { - $buf .= $_; - $ttl_buf .= $_; - } - - } else { - - $buf .= $_; - } - } - close(IN_FILE); - - - # fix body file - # - open(OUT_FILE, "> $out") || do { - print "fix_print_html: cannot open $out: $!\n"; - return 0; - }; - - &fix_html(\$buf, $is_article); - - print OUT_FILE $buf; - close(OUT_FILE); - - - return 1; -} - - -sub fix_html { - - my($buf, $is_article) = @_; - my($indx) = -1; - - - # make corrections and write out the file - # - - $$buf =~ s/(\n><LI\n)><P\n(.*?)<\/P\n>/$1$2\n/gms; - $$buf =~ s/(\n><LI\n><DIV\nCLASS="FORMALPARA"\n)><P\n(.*?)<\/P\n>/$1$2\n/gms; - $$buf =~ s/(\n><LI\nSTYLE="[^\"]+"\n)><P\n(.*?)<\/P\n>/$1$2\n/gms; - if( $is_article == 0 ) { - $$buf =~ - s/(\nCLASS="SECT[TION\d]+"\n>)<H1\n(.*?)<\/H1/$1<H0\n$2<\/H0/gims; - $$buf =~ - s/(\nCLASS="SECT[TION\d]+"\n><HR>)<H1\n(.*?)<\/H1/$1<H0\n$2<\/H0/gims; - } - $$buf =~ s/<H1(\nCLASS="INDEXDIV"\n)(.*?)<\/H1/<H2$1$2<\/H2/gims; - if( ($indx = rindex($$buf, "<H1\n><A\nNAME=\"DOC-INDEX\"")) > -1 ) { - $$buf = substr($$buf, 0, $indx); - $$buf .= "\n<\/BODY>\n<\/HTML>\n\n"; - } elsif( ($indx = rindex($$buf, "<H1\n><A\nNAME=\"doc-index\"")) > -1 ) { - $$buf = substr($$buf, 0, $indx); - $$buf .= "\n<\/BODY>\n<\/HTML>\n\n"; - } - - $$buf =~ s/\&\#13;//g; - $$buf =~ s/\&\#60;/\</g; - $$buf =~ s/\&\#62;/\>/g; - $$buf =~ s/\&\#8211;/\-/g; - $$buf =~ s/\&\#8220;/\"/g; - $$buf =~ s/\&\#8221;/\"/g; - $$buf =~ s/WIDTH=\"\d\"//g; - $$buf =~ s/><[\/]*TBODY//g; - $$buf =~ s/><[\/]*THEAD//g; - $$buf =~ s/TYPE=\"1\"\n//gim; - - $$buf =~ s/<P\nCLASS="LITERALLAYOUT"(.*?)<\/P/<P CLASS="LITERALLAYOUT"><FONT FACE=\"courier\"$1<\/FONT><\/P/gms; - - my($cnt, $j) = 0; - - if( $$buf !~ /<H1/ ) { - - # for newer docbook styles, set h2 to h1, etc. - # - for($cnt=2; $cnt < 7; $cnt++ ) { - $j = $cnt - 1; - $$buf =~ s/<H${cnt}/<H${j}/g; - $$buf =~ s/<\/H${cnt}/<\/H${j}/g; - } - - } elsif( $is_article == 0 ) { - - # decrement the headers by 1 and then re-set the - # chapter level only to H1... - # - for($cnt=5; $cnt >= 0; $cnt--) { - $j = $cnt + 1; - if( $cnt == 0 ) { - $j = 2; - } - $$buf =~ s/<H${cnt}/<H${j}/g; - $$buf =~ s/<\/H${cnt}/<\/H${j}/g; - } - - my(@l) = split(/\n/, $$buf); - for( $cnt=0; $cnt < (@l + 0); $cnt++ ) { - - if( $j == 1 ) { - if( $l[$cnt] =~ /<DIV/ ) { - $j = 0; - next; - } - $l[$cnt] =~ s/<H2/<H1/g; - $l[$cnt] =~ s/<\/H2/<\/H1/g; - } - - if( $l[$cnt] =~ /^CLASS=\"CHAP/i - || - $l[$cnt] =~ /^NAME=\"BIBL/i - || - $l[$cnt] =~ /^CLASS=\"APPENDIX/i - || - $l[$cnt] =~ /^CLASS=\"GLOSSARY/i - || - $l[$cnt] =~ /^CLASS=\"PREF/i ) { - $j = 1; - } - } - - $$buf = join("\n", @l); - - } - $$buf =~ s/><DIV\nCLASS="\w+"\n//gms; - $$buf =~ s/><\/DIV\n//gms; - - $buf =~ s/<SPAN\n[^>]*?>//gms; - $buf =~ s/<\/SPAN\n>//gms; - - $$buf =~ s/(><LI\n)><P\n(.*?)<\/P\n>(<\/LI\n)/$1$2$3/gms; - - return; -} - - -# Return true from package include -# -1; - diff --git a/external/privoxy/utils/ldp_print/ldp_print b/external/privoxy/utils/ldp_print/ldp_print deleted file mode 100755 index 35b6053..0000000 --- a/external/privoxy/utils/ldp_print/ldp_print +++ /dev/null @@ -1,72 +0,0 @@ -#!/usr/bin/perl -w -# -# usage: ldp_print <single_file.html> -# -# Creates a PDF variant of a single-file HTML representation of a -# DocBook SGML (or XML) instance. This simple wrapper assumes that -# the file was created using {open}jade in a manner similar to: -# -# jade -t sgml -i html -V nochunks -d $style $fname > $fname.html -# -# Give this script the filename as an argument. It will then parse -# the file into 'title.html' and 'body.html' and send each to -# htmldoc (as the corresponding title page and body of the document). -# -# -# CAVEATS: -# -# Assumes perl is in /usr/bin; adjust if necessary -# -# You may need to specify where the htmldoc executable resides. -# The script assumes it's within your $PATH. -# -# If you want Postscript as an output variant, uncomment the -# appropriate lines (see below). -# -# Relies on output from a DocBook instance created via DSSSL/{open}jade! -# -# Cleans up (removes) the intermediate files it creates (but not the -# PDF or Postscript files, obviously!) -# -# Works silently; PDF (PostScript) will be created in the same directory -# as was specified for the input (single-file HTML) file. -# -# Provided without warranty or support! -# -# gferg(a)sgi.com / Ferg (used as part of the LDP production env) -# - -use strict; -push(@INC, "./"); -require 'fix_print_html.lib'; - -if( $ARGV[0] eq '' || !(-r $ARGV[0]) ) { - die "\nusage: ldp_print <single_file.html>\n\n"; -} - -my($fname_wo_ext) = $ARGV[0]; -$fname_wo_ext =~ s/\.[\w]+$//; - - -# create new files from single HTML file to use for print -# -&fix_print_html($ARGV[0], 'body.html', 'title.html'); - -my($cmd) = "htmldoc --size universal --bodyfont helvetica --fontsize 8 " . - "-t pdf -f ${fname_wo_ext}.pdf --firstpage p1 --titlefile title.html" . - " body.html --footer c.1"; - -# For postscript output; append onto the above cmd string: -# -# "; htmldoc --size universal -t ps -f ${fname_wo_ext}.ps " . -# "--firstpage p1 --titlefile title.html body.html"; -# -system($cmd); -die "\nldp_print: could not create ${fname_wo_ext}.pdf ($!)\n" if ($?); - -# cleanup -# -system("rm -f body.html title.html"); - -exit(0); - diff --git a/external/privoxy/utils/prepare-configfile.pl b/external/privoxy/utils/prepare-configfile.pl deleted file mode 100755 index e3b2b55..0000000 --- a/external/privoxy/utils/prepare-configfile.pl +++ /dev/null @@ -1,50 +0,0 @@ -#!/usr/local/bin/perl - -use strict; -use warnings; - -sub main() { - my $hit_header = 0; - my $hit_option = 0; - my $header_len; - - while (<>) { - s/^1\. \@\@TITLE\@\@/ /i; - - if (m/^(\d\.)(\d\.)(\d\.)?\s/) { - # Remove the first digit as it's the - # config file section in the User Manual. - s/^(\d\.)//; - - # If it's a section header, uppercase it. - $_ = uc() if (/^\d\.\s+/); - - # Remember to underline it. - $hit_header = 1; - $header_len = length($_); - } - - s/^/# /; - - # XXX: someone should figure out what this stuff - # is supposed to do (and if it really does that). - s/^# #/####/ if /^# #{12,}/; - s/^.*$// if $hit_option; - $hit_option = 0; - s/^\n//; - s/^#\s*-{20,}//; - s/ *$//; - $hit_option = 1 if s/^#\s+@@//; - - print; - - if ($hit_header) { - # The previous line was a section - # header so we better underline it. - die "Invalid header length" unless defined $header_len; - print "# " . "=" x $header_len . "\n"; - $hit_header = 0; - }; - } -} -main(); diff --git a/external/privoxy/vc_config_pthreads.h b/external/privoxy/vc_config_pthreads.h deleted file mode 100644 index 638f5bd..0000000 --- a/external/privoxy/vc_config_pthreads.h +++ /dev/null @@ -1,484 +0,0 @@ -#ifndef CONFIG_H_INCLUDED -#define CONFIG_H_INCLUDED -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/vc_config_pthreads.h,v $ - * - * Purpose : This file should be the first thing included in every - * .c file. (Before even system headers). It contains - * #define statements for various features. It was - * introduced because the compile command line started - * getting ludicrously long with feature defines. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: vc_config_pthreads.h,v $ - * Revision 1.6 2008/03/27 18:27:38 fabiankeil - * Remove kill-popups action. - * - * Revision 1.5 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.3 2002/05/03 22:54:24 jongfoster - * Version number bump to 2.9.15 - * - * Revision 1.2 2002/04/26 18:26:09 jongfoster - * Bumping version numbers - * - * Revision 1.1 2002/04/06 20:38:01 jongfoster - * Renaming VC++ versions of config.h - * - * Revision 1.20 2002/04/03 22:28:03 gliptak - * Removed references to gnu_regex - * - * Revision 1.19 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.18 2002/03/24 17:08:12 jongfoster - * Version number bump - * - * Revision 1.17 2002/03/24 13:33:26 swa - * name change related issues - * - * Revision 1.16 2002/03/16 14:27:22 jongfoster - * Ignoring a very common warning. - * - * Revision 1.15 2002/03/13 00:28:32 jongfoster - * Hiding all the warnings generated by #include<windows.h> - * - * Revision 1.14 2001/11/30 21:35:54 jongfoster - * Bumping version number to 2.9.10 - * - * Revision 1.13 2001/10/23 21:24:09 jongfoster - * Support for FEATURE_CGI_EDIT_ACTIONS - * - * Revision 1.12 2001/10/07 15:33:14 oes - * Removed FEATURE_DENY_GZIP - * Bumped up version number - * - * Revision 1.11 2001/09/16 16:59:34 jongfoster - * Bugfix - couldn't build resources with previous version. - * - * Revision 1.10 2001/09/16 16:19:02 jongfoster - * New version based on latest configure.in and acconfig.h - * - * Revision 1.9 2001/07/30 22:16:07 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.8 2001/07/25 19:16:27 oes - * Bumping version number to 2.9.8 - * - * Revision 1.7 2001/07/21 18:00:07 jongfoster - * Bumping version number to 2.9.7 - * - * Revision 1.6 2001/07/15 20:08:40 jongfoster - * New build files for VC++ which provide the option of POSIX - * or Win32 threads. - * - * Revision 1.5 2001/07/15 18:00:46 jongfoster - * Renaming STATIC to STATIC_PCRE. - * Replacing this file with one built by "configure" from - * "config.h.in", for consistency. - * - * Revision 1.6 2001/07/15 17:54:29 jongfoster - * Renaming #define STATIC to STATIC_PCRE - * Adding new #define FEATURE_PTHREAD that will be used to enable - * POSIX threads support. - * - * Revision 1.5 2001/07/13 13:48:37 oes - * - (Fix:) Copied CODE_STATUS #define from config.h.in - * - split REGEX #define into REGEX_GNU and REGEX_PCRE - * and removed PCRE. - * (REGEX = REGEX_GNU || REGEX_PCRE per project.h) - * - Moved STATIC (for pcre) here from Makefile.in - * - Introduced STATIC_PCRS #define to allow for dynaimc linking with - * libpcrs - * - Removed PCRS #define, since pcrs is now needed for CGI anyway - * - * Revision 1.4 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.3 2001/05/26 01:26:34 jongfoster - * New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor. - * This #define cannot be set from ./configure - there's no point, it - * doesn't work yet. See feature request # 425722 - * - * Revision 1.2 2001/05/22 17:43:35 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Many minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.1.1.1 2001/05/15 13:58:45 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -/* - * Version number - Major (X._._) - */ -#define VERSION_MAJOR 2 - -/* - * Version number - Minor (_.X._) - */ -#define VERSION_MINOR 9 - -/* - * Version number - Point (_._.X) - */ -#define VERSION_POINT 15 - -/* - * Version number, as a string - */ -#define VERSION "2.9.15" - -/* - * Status of the code: alpha, beta or stable - */ -#define CODE_STATUS "beta" - -/* - * Regular expression matching for URLs. (Highly recommended). - * If neither of these are defined then you can ony use prefix matching. - * Don't bother to change this here! Use configure instead. - */ -#define REGEX_PCRE 1 - -/* - * Should pcre be statically built in instead of linkling with libpcre? - * (This is determined by configure depending on the availiability of - * libpcre and user preferences). The name is ugly, but pcre needs it. - * Don't bother to change this here! Use configure instead. - */ -#define STATIC_PCRE 1 - -/* - * Should pcrs be statically built in instead of linkling with libpcrs? - * (This is determined by configure depending on the availiability of - * libpcrs and user preferences). - * Don't bother to change this here! Use configure instead. - */ -#define STATIC_PCRS 1 - -/* - * Allows the use of an ACL to control access to the proxy by IP address. - */ -#define FEATURE_ACL 1 - -/* - * Enables the web-based configuration (actionsfile) editor. If you - * have a shared proxy, you might want to turn this off. - */ -#define FEATURE_CGI_EDIT_ACTIONS 1 - -/* - * Allows the use of jar files to capture cookies. - */ -#define FEATURE_COOKIE_JAR 1 - -/* - * Locally redirect remote script-redirect URLs - */ -#define FEATURE_FAST_REDIRECTS 1 - -/* - * Bypass filtering for 1 page only - */ -#define FEATURE_FORCE_LOAD 1 - -/* - * Allow blocking using images as well as HTML. - * If you do not define this then everything is blocked as HTML. - * - * Note that this is required if you want to use FEATURE_IMAGE_DETECT_MSIE. - */ -#define FEATURE_IMAGE_BLOCKING 1 - -/* - * Detect image requests automatically for MSIE. Will fall back to - * other image-detection methods (i.e. "+image" permission) for other - * browsers. - * - * You must also define FEATURE_IMAGE_BLOCKING to use this feature. - * - * It detects the following header pair as an image request: - * - * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0) - * Accept: * / * - * - * And the following as a HTML request: - * - * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0) - * Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, * / * - * - * And no, I haven't got that backwards - IE is being wierd. - * - * Known limitations: - * 1) If you press shift-reload on a blocked HTML page, you get - * the image "blocked" page, not the HTML "blocked" page. - * 2) Once an image "blocked" page has been sent, viewing it - * in it's own browser window *should* bring up the HTML - * "blocked" page, but it doesn't. You need to clear the - * browser cache to get the HTML version again. - * - * These limitations are due to IE making inconsistent choices - * about which "Accept:" header to send. - */ -#define FEATURE_IMAGE_DETECT_MSIE 1 - -/* - * Use POSIX threads instead of native threads. - */ -#define FEATURE_PTHREAD 1 - -/* - * Enables statistics function. - */ -#define FEATURE_STATISTICS 1 - -/* - * Allow JunkBuster to be "disabled" so it is just a normal non-blocking - * non-anonymizing proxy. This is useful if you're trying to access a - * blocked or broken site - just change the setting in the config file, - * or use the handy "Disable" menu option in the Windows GUI. - */ -#define FEATURE_TOGGLE 1 - -/* - * Allows the use of trust files. - */ -#define FEATURE_TRUST 1 - - -/**************************************************************************** - * The following values are correct for MS VC++97. - * You should normally not change them. - ***************************************************************************/ - - -/* - * Defined on Solaris only. Makes the system libraries thread safe. - */ -/* #define _REENTRANT 1 */ - -/* - * Defined on Solaris only. Without this, many important functions are not - * defined in the system headers. - */ -/* #define __EXTENSIONS__ 1 */ - -/* - * Defined always. - * FIXME: Don't know what it does or why we need it. - * (presumably something to do with MultiThreading?) - */ -#define __MT__ 1 - - -/* Define if you have the `bcopy' function. */ -/* #define HAVE_BCOPY 1 */ - -/* Define if you have the <inttypes.h> header file. */ -/* #define HAVE_INTTYPES_H 1 */ - -/* Define if you have the `memmove' function. */ -#define HAVE_MEMMOVE 1 - -/* Define if you have the <memory.h> header file. */ -#define HAVE_MEMORY_H 1 - -/* Define if you have the <stdint.h> header file. */ -/* #define HAVE_STDINT_H 1 */ - -/* Define if you have the <stdlib.h> header file. */ -#define HAVE_STDLIB_H 1 - -/* Define if you have the `strerror' function. */ -#define HAVE_STRERROR 1 - -/* Define if you have the <strings.h> header file. */ -/* #define HAVE_STRINGS_H 1 */ - -/* Define if you have the <string.h> header file. */ -#define HAVE_STRING_H 1 - -/* Define if you have the <sys/stat.h> header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define if you have the <sys/types.h> header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define if you have the <unistd.h> header file. */ -/* #define HAVE_UNISTD_H 1 */ - -/* The size of a `char *', as computed by sizeof. */ -#define SIZEOF_CHAR_P 4 - -/* The size of a `int', as computed by sizeof. */ -#define SIZEOF_INT 4 - -/* The size of a `long', as computed by sizeof. */ -#define SIZEOF_LONG 4 - -/* The size of a `long long', as computed by sizeof. */ -/* #define SIZEOF_LONG_LONG ---not supported--- */ - -/* The size of a `size_t', as computed by sizeof. */ -#define SIZEOF_SIZE_T 4 - -/* Define if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define to empty if `const' does not conform to ANSI C. */ -/* #define const */ - -/* Define to `unsigned' if <sys/types.h> does not define. */ -/* #define size_t unsigned */ - -/* - * Defined always. - * FIXME: Don't know what it does or why we need it. - * (presumably something to do with ANSI Standard C?) - */ -/* Don't define for MS VC++ or you don't get strdup() declared. -#ifndef __STDC__ -#define __STDC__ 1 -#endif -*/ - -/* - * Need to set up this define only for the Pthreads library for - * Win32, available from http://sources.redhat.com/pthreads-win32/ - */ -#if defined(FEATURE_PTHREAD) && defined(_WIN32) -#define __CLEANUP_C -#endif /* defined(FEATURE_PTHREAD) && defined(_WIN32) */ - -/* - * BEOS does not currently support POSIX threads. - * This *should* be detected by ./configure, but let's be sure. - */ -#if defined(FEATURE_PTHREAD) && defined(__BEOS__) -#error BEOS does not support pthread - please run ./configure again with "--disable-pthread" - -#endif /* defined(FEATURE_PTHREAD) && defined(__BEOS__) */ - - -#if (!defined(_MSC_VER)) && (!defined(RC_INVOKED)) -#error This file is only intended for MS VC++ on Win32. For other compilers, please run configure. -#endif /* (!defined(_MSC_VER)) && (!defined(RC_INVOKED)) */ - -#pragma warning ( disable: 4100 4115 4201 4214 4244 4514 ) - -/* - * C4100 : unreferenced formal parameter - * Very common, not a bug - * - * C4115 : named type definition in parentheses - * #include <windows.h> causes a warning about one of these. - * - * C4201 : nonstandard extension used : nameless struct/union - * Endemic in <windows.h> - * - * C4214 nonstandard extension used : bit field types other than int - * Endemic in <windows.h> - * - * C4244 conversion from 'int' to 'char', possible loss of data - * Should really fix this one. Throughout the JB code. - * - * C4514 unreferenced inline/local function has been removed - * Caused by #include <windows.h> - */ - -#endif /* CONFIG_H_INCLUDED */ - diff --git a/external/privoxy/vc_config_winthreads.h b/external/privoxy/vc_config_winthreads.h deleted file mode 100644 index ca863a9..0000000 --- a/external/privoxy/vc_config_winthreads.h +++ /dev/null @@ -1,675 +0,0 @@ -#ifndef CONFIG_H_INCLUDED -#define CONFIG_H_INCLUDED -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/vc_config_winthreads.h,v $ - * - * Purpose : This file should be the first thing included in every - * .c file. (Before even system headers). It contains - * #define statements for various features. It was - * introduced because the compile command line started - * getting ludicrously long with feature defines. - * - * Copyright : Written by and Copyright (C) 2001 the SourceForge - * Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: vc_config_winthreads.h,v $ - * Revision 1.6 2008/03/27 18:27:39 fabiankeil - * Remove kill-popups action. - * - * Revision 1.5 2006/07/18 14:48:47 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.3.2.1 2006/04/08 21:57:26 david__schmidt - * Synchronize with a more modern copy of config.h. - * - * Revision 1.3 2002/05/03 22:54:24 jongfoster - * Version number bump to 2.9.15 - * - * Revision 1.2 2002/04/26 18:26:09 jongfoster - * Bumping version numbers - * - * Revision 1.1 2002/04/06 20:38:01 jongfoster - * Renaming VC++ versions of config.h - * - * Revision 1.14 2002/03/26 22:29:54 swa - * we have a new homepage! - * - * Revision 1.13 2002/03/24 17:08:12 jongfoster - * Version number bump - * - * Revision 1.12 2002/03/24 13:25:43 swa - * name change related issues - * - * Revision 1.11 2002/03/16 14:27:22 jongfoster - * Ignoring a very common warning. - * - * Revision 1.10 2002/03/13 00:28:32 jongfoster - * Hiding all the warnings generated by #include<windows.h> - * - * Revision 1.9 2001/11/30 21:35:54 jongfoster - * Bumping version number to 2.9.10 - * - * Revision 1.8 2001/10/23 21:24:09 jongfoster - * Support for FEATURE_CGI_EDIT_ACTIONS - * - * Revision 1.7 2001/10/07 15:33:14 oes - * Removed FEATURE_DENY_GZIP - * Bumped up version number - * - * Revision 1.6 2001/09/16 16:59:34 jongfoster - * Bugfix - couldn't build resources with previous version. - * - * Revision 1.5 2001/09/16 16:19:02 jongfoster - * New version based on latest configure.in and acconfig.h - * - * Revision 1.9 2001/07/30 22:16:07 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.8 2001/07/25 19:16:27 oes - * Bumping version number to 2.9.8 - * - * Revision 1.7 2001/07/21 18:00:07 jongfoster - * Bumping version number to 2.9.7 - * - * Revision 1.6 2001/07/15 20:08:40 jongfoster - * New build files for VC++ which provide the option of POSIX - * or Win32 threads. - * - * Revision 1.5 2001/07/15 18:00:46 jongfoster - * Renaming STATIC to STATIC_PCRE. - * Replacing this file with one built by "configure" from - * "config.h.in", for consistency. - * - * Revision 1.6 2001/07/15 17:54:29 jongfoster - * Renaming #define STATIC to STATIC_PCRE - * Adding new #define FEATURE_PTHREAD that will be used to enable - * POSIX threads support. - * - * Revision 1.5 2001/07/13 13:48:37 oes - * - (Fix:) Copied CODE_STATUS #define from config.h.in - * - split REGEX #define into REGEX_GNU and REGEX_PCRE - * and removed PCRE. - * (REGEX = REGEX_GNU || REGEX_PCRE per project.h) - * - Moved STATIC (for pcre) here from Makefile.in - * - Introduced STATIC_PCRS #define to allow for dynaimc linking with - * libpcrs - * - Removed PCRS #define, since pcrs is now needed for CGI anyway - * - * Revision 1.4 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.3 2001/05/26 01:26:34 jongfoster - * New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor. - * This #define cannot be set from ./configure - there's no point, it - * doesn't work yet. See feature request # 425722 - * - * Revision 1.2 2001/05/22 17:43:35 oes - * - * - Enabled filtering banners by size rather than URL - * by adding patterns that replace all standard banner - * sizes with the "Junkbuster" gif to the re_filterfile - * - * - Enabled filtering WebBugs by providing a pattern - * which kills all 1x1 images - * - * - Added support for PCRE_UNGREEDY behaviour to pcrs, - * which is selected by the (nonstandard and therefore - * capital) letter 'U' in the option string. - * It causes the quantifiers to be ungreedy by default. - * Appending a ? turns back to greedy (!). - * - * - Added a new interceptor ijb-send-banner, which - * sends back the "Junkbuster" gif. Without imagelist or - * MSIE detection support, or if tinygif = 1, or the - * URL isn't recognized as an imageurl, a lame HTML - * explanation is sent instead. - * - * - Added new feature, which permits blocking remote - * script redirects and firing back a local redirect - * to the browser. - * The feature is conditionally compiled, i.e. it - * can be disabled with --disable-fast-redirects, - * plus it must be activated by a "fast-redirects" - * line in the config file, has its own log level - * and of course wants to be displayed by show-proxy-args - * Note: Boy, all the #ifdefs in 1001 locations and - * all the fumbling with configure.in and acconfig.h - * were *way* more work than the feature itself :-( - * - * - Because a generic redirect template was needed for - * this, tinygif = 3 now uses the same. - * - * - Moved GIFs, and other static HTTP response templates - * to project.h - * - * - Many minor fixes - * - * - Removed some >400 CRs again (Jon, you really worked - * a lot! ;-) - * - * Revision 1.1.1.1 2001/05/15 13:58:45 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -/* - * Version number - Major (X._._) - */ -#define VERSION_MAJOR 0 - -/* - * Version number - Minor (_.X._) - */ -#define VERSION_MINOR 0 - -/* - * Version number - Point (_._.X) - */ -#define VERSION_POINT 0 - -/* - * Version number, as a string - */ -#define VERSION "0.0.0" - -/* - * Status of the code: alpha, beta or stable - */ -#define CODE_STATUS "UNRELEASED" - -/* - * Regular expression matching for URLs. (Highly recommended). - * If neither of these are defined then you can ony use prefix matching. - * Don't bother to change this here! Use configure instead. - */ -/* #define REGEX_GNU 1 */ -#define REGEX_PCRE 1 - -/* - * Should pcre be statically built in instead of linkling with libpcre? - * (This is determined by configure depending on the availiability of - * libpcre and user preferences). The name is ugly, but pcre needs it. - * Don't bother to change this here! Use configure instead. - */ -#define STATIC_PCRE 1 - -/* - * Should pcrs be statically built in instead of linkling with libpcrs? - * (This is determined by configure depending on the availiability of - * libpcrs and user preferences). - * Don't bother to change this here! Use configure instead. - */ -#define STATIC_PCRS 1 - -/* - * Allows the use of an ACL to control access to the proxy by IP address. - */ -#define FEATURE_ACL 1 - -/* - * Enables the web-based configuration (actionsfile) editor. If you - * have a shared proxy, you might want to turn this off. - */ -#define FEATURE_CGI_EDIT_ACTIONS 1 - -/* - * Allows the use of jar files to capture cookies. - */ -#define FEATURE_COOKIE_JAR 1 - -/* - * Locally redirect remote script-redirect URLs - */ -#define FEATURE_FAST_REDIRECTS 1 - -/* - * Bypass filtering for 1 page only - */ -#define FEATURE_FORCE_LOAD 1 - -/* - * Allow blocking using images as well as HTML. - * If you do not define this then everything is blocked as HTML. - * - * Note that this is required if you want to use FEATURE_IMAGE_DETECT_MSIE. - */ -#define FEATURE_IMAGE_BLOCKING 1 - -/* - * Detect image requests automatically for MSIE. Will fall back to - * other image-detection methods (i.e. "+image" permission) for other - * browsers. - * - * You must also define FEATURE_IMAGE_BLOCKING to use this feature. - * - * It detects the following header pair as an image request: - * - * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0) - * Accept: * / * - * - * And the following as a HTML request: - * - * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0) - * Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, * / * - * - * And no, I haven't got that backwards - IE is being wierd. - * - * Known limitations: - * 1) If you press shift-reload on a blocked HTML page, you get - * the image "blocked" page, not the HTML "blocked" page. - * 2) Once an image "blocked" page has been sent, viewing it - * in it's own browser window *should* bring up the HTML - * "blocked" page, but it doesn't. You need to clear the - * browser cache to get the HTML version again. - * - * These limitations are due to IE making inconsistent choices - * about which "Accept:" header to send. - */ -#define FEATURE_IMAGE_DETECT_MSIE 1 - -/* - * Use PNG instead of GIF for built-in images - */ -/* #undef FEATURE_NO_GIFS */ - -/* - * Use POSIX threads instead of native threads. - */ -/* #define FEATURE_PTHREAD 1 */ - -/* - * Enables statistics function. - */ -#define FEATURE_STATISTICS 1 - -/* - * Allow JunkBuster to be "disabled" so it is just a normal non-blocking - * non-anonymizing proxy. This is useful if you're trying to access a - * blocked or broken site - just change the setting in the config file, - * or use the handy "Disable" menu option in the Windows GUI. - */ -#define FEATURE_TOGGLE 1 - -/* - * Allows the use of trust files. - */ -#define FEATURE_TRUST 1 - - -/**************************************************************************** - * The following values are correct for MS VC++97. - * You should normally not change them. - ***************************************************************************/ - - -/* - * Defined on Solaris only. Makes the system libraries thread safe. - */ -/* #define _REENTRANT 1 */ - -/* - * Defined on Solaris only. Without this, many important functions are not - * defined in the system headers. - */ -/* #define __EXTENSIONS__ 1 */ - -/* - * Defined always. - * FIXME: Don't know what it does or why we need it. - * (presumably something to do with MultiThreading?) - */ -#define __MT__ 1 - -/* If the (nonstandard and thread-safe) function gethostbyname_r - * is available, select which signature to use - */ -/* #undef HAVE_GETHOSTBYNAME_R_6_ARGS */ -/* #undef HAVE_GETHOSTBYNAME_R_5_ARGS */ -/* #undef HAVE_GETHOSTBYNAME_R_3_ARGS */ - -/* If the (nonstandard and thread-safe) function gethostbyaddr_r - * is available, select which signature to use - */ -/* #undef HAVE_GETHOSTBYADDR_R_8_ARGS */ -/* #undef HAVE_GETHOSTBYADDR_R_7_ARGS */ -/* #undef HAVE_GETHOSTBYADDR_R_5_ARGS */ - -/* Defined if you have gmtime_r and localtime_r with a signature - * of (struct time *, struct tm *) - */ -#undef HAVE_GMTIME_R - -/* #define HAVE_LOCALTIME_R 1 */ - -/* Define to 'int' if <sys/socket.h> doesn't have it. - */ -#define socklen_t int - -/* Define if pcre.h must be included as <pcre/pcre.h> - */ -/* #undef PCRE_H_IN_SUBDIR */ - -/* Define if pcreposix.h must be included as <pcre/pcreposix.h> - */ -/* #undef PCREPOSIX_H_IN_SUBDIR */ - - -/* Define to 1 if you have the <arpa/inet.h> header file. */ -#define HAVE_ARPA_INET_H 1 - -/* Define to 1 if you have the `atexit' function. */ -#define HAVE_ATEXIT 1 - -/* Define if you have the `bcopy' function. */ -/* #define HAVE_BCOPY 1 */ - -/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'. - */ -#define HAVE_DIRENT_H 1 - -/* Define to 1 if you have the <errno.h> header file. */ -#define HAVE_ERRNO_H 1 - -/* Define to 1 if you have the <fcntl.h> header file. */ -#define HAVE_FCNTL_H 1 - -/* Define to 1 if you have the `getcwd' function. */ -#define HAVE_GETCWD 1 - -/* Define to 1 if you have the `gethostbyaddr' function. */ -#define HAVE_GETHOSTBYADDR 1 - -/* Define to 1 if you have the `gethostbyname' function. */ -#define HAVE_GETHOSTBYNAME 1 - -/* Define to 1 if you have the `inet_ntoa' function. */ -#define HAVE_INET_NTOA 1 - -/* Define if you have the <inttypes.h> header file. */ -/* #define HAVE_INTTYPES_H 1 */ - -/* Define to 1 if you have the `nsl' library (-lnsl). */ -/* #undef HAVE_LIBNSL */ - -/* Define to 1 if you have the <limits.h> header file. */ -#define HAVE_LIMITS_H 1 - -/* Define to 1 if you have the <locale.h> header file. */ -#define HAVE_LOCALE_H 1 - -/* Define to 1 if you have the `localtime_r' function. */ -#undef HAVE_LOCALTIME_R - -/* Define to 1 if you have the `memchr' function. */ -#define HAVE_MEMCHR 1 - -/* Define if you have the `memmove' function. */ -#define HAVE_MEMMOVE 1 - -/* Define if you have the <memory.h> header file. */ -#define HAVE_MEMORY_H 1 - -/* Define to 1 if you have the `memset' function. */ -#define HAVE_MEMSET 1 - -/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */ -/* #undef HAVE_NDIR_H */ - -/* Define to 1 if you have the <netdb.h> header file. */ -#define HAVE_NETDB_H 1 - -/* Define to 1 if you have the <netinet/in.h> header file. */ -#define HAVE_NETINET_IN_H 1 - -/* Define to 1 if you have the <OS.h> header file. */ -/* #undef HAVE_OS_H */ - -/* Define to 1 if you have the `regcomp' function. */ -#define HAVE_REGCOMP 1 - -/* Define to 1 if you have the `select' function. */ -#define HAVE_SELECT 1 - -/* Define to 1 if you have the `setlocale' function. */ -#define HAVE_SETLOCALE 1 - -/* Define to 1 if you have the `socket' function. */ -#define HAVE_SOCKET 1 - -/* Define to 1 if you have the <stddef.h> header file. */ -#define HAVE_STDDEF_H 1 - -/* Define if you have the <stdint.h> header file. */ -/* #define HAVE_STDINT_H 1 */ - -/* Define if you have the <stdlib.h> header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the `strchr' function. */ -#define HAVE_STRCHR 1 - -/* Define to 1 if you have the `strdup' function. */ -#define HAVE_STRDUP 1 - -/* Define if you have the `strerror' function. */ -#define HAVE_STRERROR 1 - -/* Define to 1 if you have the `strftime' function. */ -#define HAVE_STRFTIME 1 - -/* Define if you have the <strings.h> header file. */ -/* #define HAVE_STRINGS_H 1 */ - -/* Define if you have the <string.h> header file. */ -#define HAVE_STRING_H 1 - -/* Define to 1 if you have the `strstr' function. */ -#define HAVE_STRSTR 1 - -/* Define to 1 if you have the `strtoul' function. */ -#define HAVE_STRTOUL 1 - -/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'. - */ -/* #undef HAVE_SYS_DIR_H */ - -/* Define to 1 if you have the <sys/ioctl.h> header file. */ -#define HAVE_SYS_IOCTL_H 1 - -/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'. - */ -/* #undef HAVE_SYS_NDIR_H */ - -/* Define to 1 if you have the <sys/socket.h> header file. */ -#define HAVE_SYS_SOCKET_H 1 - -/* Define if you have the <sys/stat.h> header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define to 1 if you have the <sys/timeb.h> header file. */ -#define HAVE_SYS_TIMEB_H 1 - -/* Define to 1 if you have the <sys/time.h> header file. */ -#define HAVE_SYS_TIME_H 1 - -/* Define to 1 if you have the <sys/types.h> header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the <sys/wait.h> header file. */ -#define HAVE_SYS_WAIT_H 1 - -/* Define if you have the <unistd.h> header file. */ -/* #define HAVE_UNISTD_H 1 */ - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "" - -/* Define to the full name and version of this package. */ -#define PACKAGE_STRING "" - -/* Define to the one symbol short name of this package. */ -#define PACKAGE_TARNAME "" - -/* Define to the version of this package. */ -#define PACKAGE_VERSION "" - -/* Define as the return type of signal handlers (`int' or `void'). */ -#define RETSIGTYPE void - -/* Define to 1 if the `setpgrp' function takes no argument. */ -#define SETPGRP_VOID 1 - -/* The size of a `char *', as computed by sizeof. */ -#define SIZEOF_CHAR_P 4 - -/* The size of a `int', as computed by sizeof. */ -#define SIZEOF_INT 4 - -/* The size of a `long', as computed by sizeof. */ -#define SIZEOF_LONG 4 - -/* The size of a `long long', as computed by sizeof. */ -/* #define SIZEOF_LONG_LONG ---not supported--- */ - -/* The size of a `size_t', as computed by sizeof. */ -#define SIZEOF_SIZE_T 4 - -/* Define if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */ -#define TIME_WITH_SYS_TIME 1 - -/* Define to 1 if your <sys/time.h> declares `struct tm'. */ -/* #undef TM_IN_SYS_TIME */ - -/* Define to empty if `const' does not conform to ANSI C. */ -/* #define const */ - -/* Define to `int' if <sys/types.h> does not define. */ -/* #undef pid_t */ - -/* Define to `unsigned' if <sys/types.h> does not define. */ -/* #define size_t unsigned */ - -/* Define to 'int' if <sys/socket.h> doesn't have it. */ -#define socklen_t int - -/* - * Defined always. - * FIXME: Don't know what it does or why we need it. - * (presumably something to do with ANSI Standard C?) - */ -/* Don't define for MS VC++ or you don't get strdup() declared. -#ifndef __STDC__ -#define __STDC__ 1 -#endif -*/ - -/* - * Need to set up this define only for the Pthreads library for - * Win32, available from http://sources.redhat.com/pthreads-win32/ - */ -#if defined(FEATURE_PTHREAD) && defined(_WIN32) -#define __CLEANUP_C -#endif /* defined(FEATURE_PTHREAD) && defined(_WIN32) */ - -/* - * Need to keep errlog.c from trying to inline the non-existent - * locking stubs. Could be removed once a real platform-specific - * solution is generated. - */ -#define inline "" - -/* - * BEOS does not currently support POSIX threads. - * This *should* be detected by ./configure, but let's be sure. - */ -#if defined(FEATURE_PTHREAD) && defined(__BEOS__) -#error BEOS does not support pthread - please run ./configure again with "--disable-pthread" - -#endif /* defined(FEATURE_PTHREAD) && defined(__BEOS__) */ - - -#if (!defined(_MSC_VER)) && (!defined(RC_INVOKED)) -#error This file is only intended for MS VC++ on Win32. For other compilers, please run configure. -#endif /* (!defined(_MSC_VER)) && (!defined(RC_INVOKED)) */ - -#pragma warning ( disable: 4100 4115 4201 4214 4244 4514 ) - -/* - * C4100 : unreferenced formal parameter - * Very common, not a bug - * - * C4115 : named type definition in parentheses - * #include <windows.h> causes a warning about one of these. - * - * C4201 : nonstandard extension used : nameless struct/union - * Endemic in <windows.h> - * - * C4214 nonstandard extension used : bit field types other than int - * Endemic in <windows.h> - * - * C4244 conversion from 'int' to 'char', possible loss of data - * Should really fix this one. Throughout the JB code. - * - * C4514 unreferenced inline/local function has been removed - * Caused by #include <windows.h> - */ - - -#endif /* CONFIG_H_INCLUDED */ - diff --git a/external/privoxy/vc_console.dsp b/external/privoxy/vc_console.dsp deleted file mode 100644 index 3561b5e..0000000 --- a/external/privoxy/vc_console.dsp +++ /dev/null @@ -1,405 +0,0 @@ -# Microsoft Developer Studio Project File - Name="vc_console" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 5.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=vc_console - Win32 Debug with Win32 threads -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "vc_console.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "vc_console.mak"\ - CFG="vc_console - Win32 Debug with Win32 threads" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "vc_console - Win32 Release" (based on\ - "Win32 (x86) Console Application") -!MESSAGE "vc_console - Win32 Debug" (based on\ - "Win32 (x86) Console Application") -!MESSAGE "vc_console - Win32 Debug with Win32 threads" (based on\ - "Win32 (x86) Console Application") -!MESSAGE "vc_console - Win32 Release with Win32 threads" (based on\ - "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe - -!IF "$(CFG)" == "vc_console - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "console_release" -# PROP Intermediate_Dir "console_release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD CPP /nologo /MT /W3 /GX /O2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /YX /FD /c -# ADD BASE RSC /l 0x809 /d "NDEBUG" -# ADD RSC /l 0x809 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /machine:I386 - -!ELSEIF "$(CFG)" == "vc_console - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "Debug" -# PROP BASE Intermediate_Dir "Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "console_debug" -# PROP Intermediate_Dir "console_debug" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /FR /YX /FD /c -# ADD BASE RSC /l 0x809 /d "_DEBUG" -# ADD RSC /l 0x809 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept - -!ELSEIF "$(CFG)" == "vc_console - Win32 Debug with Win32 threads" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "console_" -# PROP BASE Intermediate_Dir "console_" -# PROP BASE Ignore_Export_Lib 0 -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "console_debug_winthr" -# PROP Intermediate_Dir "console_debug_winthr" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /FR /YX /FD /c -# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /FR /YX /FD /c -# ADD BASE RSC /l 0x809 /d "_DEBUG" -# ADD RSC /l 0x809 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept - -!ELSEIF "$(CFG)" == "vc_console - Win32 Release with Win32 threads" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "console0" -# PROP BASE Intermediate_Dir "console0" -# PROP BASE Ignore_Export_Lib 0 -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "console_release_winthr" -# PROP Intermediate_Dir "console_release_winthr" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MT /W3 /GX /O2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /YX /FD /c -# ADD CPP /nologo /MT /W3 /GX /O2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /YX /FD /c -# ADD BASE RSC /l 0x809 /d "NDEBUG" -# ADD RSC /l 0x809 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:console /machine:I386 - -!ENDIF - -# Begin Target - -# Name "vc_console - Win32 Release" -# Name "vc_console - Win32 Debug" -# Name "vc_console - Win32 Debug with Win32 threads" -# Name "vc_console - Win32 Release with Win32 threads" -# Begin Group "JunkBuster" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\actionlist.h -# End Source File -# Begin Source File - -SOURCE=.\actions.c -# End Source File -# Begin Source File - -SOURCE=.\actions.h -# End Source File -# Begin Source File - -SOURCE=.\cgi.c -# End Source File -# Begin Source File - -SOURCE=.\cgi.h -# End Source File -# Begin Source File - -SOURCE=.\cgiedit.c -# End Source File -# Begin Source File - -SOURCE=.\cgiedit.h -# End Source File -# Begin Source File - -SOURCE=.\cgisimple.c -# End Source File -# Begin Source File - -SOURCE=.\cgisimple.h -# End Source File -# Begin Source File - -SOURCE=.\config.h -# End Source File -# Begin Source File - -SOURCE=.\deanimate.c -# End Source File -# Begin Source File - -SOURCE=.\deanimate.h -# End Source File -# Begin Source File - -SOURCE=.\errlog.c -# End Source File -# Begin Source File - -SOURCE=.\errlog.h -# End Source File -# Begin Source File - -SOURCE=.\filters.c -# End Source File -# Begin Source File - -SOURCE=.\filters.h -# End Source File -# Begin Source File - -SOURCE=.\jcc.c -# End Source File -# Begin Source File - -SOURCE=.\jcc.h -# End Source File -# Begin Source File - -SOURCE=.\loadcfg.c -# End Source File -# Begin Source File - -SOURCE=.\loadcfg.h -# End Source File -# Begin Source File - -SOURCE=.\loaders.c -# End Source File -# Begin Source File - -SOURCE=.\loaders.h -# End Source File -# Begin Source File - -SOURCE=.\parsers.c -# End Source File -# Begin Source File - -SOURCE=.\parsers.h -# End Source File -# Begin Source File - -SOURCE=.\project.h -# End Source File -# Begin Source File - -SOURCE=.\urlmatch.c -# End Source File -# Begin Source File - -SOURCE=.\urlmatch.h -# End Source File -# End Group -# Begin Group "Win32" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\cygwin.h -# End Source File -# Begin Source File - -SOURCE=.\win32.c -# End Source File -# Begin Source File - -SOURCE=.\win32.h -# End Source File -# End Group -# Begin Group "PCRE" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\pcre\chartables.c - -!IF "$(CFG)" == "vc_console - Win32 Release" - -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_console - Win32 Debug" - -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_console - Win32 Debug with Win32 threads" - -# PROP BASE Exclude_From_Build 1 -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_console - Win32 Release with Win32 threads" - -# PROP BASE Exclude_From_Build 1 -# PROP Exclude_From_Build 1 - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\pcre\config.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\get.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\internal.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\maketables.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcre.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcre.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcreposix.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcreposix.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\study.c -# End Source File -# End Group -# Begin Group "PCRS" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\pcrs.c -# End Source File -# Begin Source File - -SOURCE=.\pcrs.h -# End Source File -# End Group -# Begin Group "Sockets" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\gateway.c -# End Source File -# Begin Source File - -SOURCE=.\gateway.h -# End Source File -# Begin Source File - -SOURCE=.\jbsockets.c -# End Source File -# Begin Source File - -SOURCE=.\jbsockets.h -# End Source File -# End Group -# Begin Group "Utilities" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\encode.c -# End Source File -# Begin Source File - -SOURCE=.\encode.h -# End Source File -# Begin Source File - -SOURCE=.\list.c -# End Source File -# Begin Source File - -SOURCE=.\list.h -# End Source File -# Begin Source File - -SOURCE=.\miscutil.c -# End Source File -# Begin Source File - -SOURCE=.\miscutil.h -# End Source File -# Begin Source File - -SOURCE=.\ssplit.c -# End Source File -# Begin Source File - -SOURCE=.\ssplit.h -# End Source File -# End Group -# End Target -# End Project diff --git a/external/privoxy/vc_privoxy.dsp b/external/privoxy/vc_privoxy.dsp deleted file mode 100644 index 5afaec9..0000000 --- a/external/privoxy/vc_privoxy.dsp +++ /dev/null @@ -1,488 +0,0 @@ -# Microsoft Developer Studio Project File - Name="vc_privoxy" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 5.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Application" 0x0101 - -CFG=vc_privoxy - Win32 Debug with Win32 threads -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "vc_privoxy.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "vc_privoxy.mak"\ - CFG="vc_privoxy - Win32 Debug with Win32 threads" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "vc_privoxy - Win32 Release" (based on "Win32 (x86) Application") -!MESSAGE "vc_privoxy - Win32 Debug" (based on "Win32 (x86) Application") -!MESSAGE "vc_privoxy - Win32 Release with Win32 threads" (based on\ - "Win32 (x86) Application") -!MESSAGE "vc_privoxy - Win32 Debug with Win32 threads" (based on\ - "Win32 (x86) Application") -!MESSAGE - -# Begin Project -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -MTL=midl.exe -RSC=rc.exe - -!IF "$(CFG)" == "vc_privoxy - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "vc_release" -# PROP BASE Intermediate_Dir "vc_release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "vc_release" -# PROP Intermediate_Dir "vc_release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c -# ADD CPP /nologo /MT /W3 /GX /O2 /Ob2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c -# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 -# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 -# ADD BASE RSC /l 0x809 /d "NDEBUG" -# ADD RSC /l 0x809 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386 -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /machine:I386 - -!ELSEIF "$(CFG)" == "vc_privoxy - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "vc_debug" -# PROP BASE Intermediate_Dir "vc_debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "vc_debug" -# PROP Intermediate_Dir "vc_debug" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c -# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c -# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 -# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 -# ADD BASE RSC /l 0x809 /d "_DEBUG" -# ADD RSC /l 0x809 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept - -!ELSEIF "$(CFG)" == "vc_privoxy - Win32 Release with Win32 threads" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "vc_junkb" -# PROP BASE Intermediate_Dir "vc_junkb" -# PROP BASE Ignore_Export_Lib 0 -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "vc_release_winthr" -# PROP Intermediate_Dir "vc_release_winthr" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MT /W3 /GX /O2 /Ob2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c -# ADD CPP /nologo /MT /W3 /GX /O2 /Ob2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c -# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 -# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 -# ADD BASE RSC /l 0x809 /d "NDEBUG" -# ADD RSC /l 0x809 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /machine:I386 -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:windows /machine:I386 - -!ELSEIF "$(CFG)" == "vc_privoxy - Win32 Debug with Win32 threads" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "vc_junk0" -# PROP BASE Intermediate_Dir "vc_junk0" -# PROP BASE Ignore_Export_Lib 0 -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "vc_debug_winthr" -# PROP Intermediate_Dir "vc_debug_winthr" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /O2 /I "pcre" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "STATIC" /YX /FD /c -# ADD CPP /nologo /MTd /W4 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c -# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 -# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 -# ADD BASE RSC /l 0x809 /d "_DEBUG" -# ADD RSC /l 0x809 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept - -!ENDIF - -# Begin Target - -# Name "vc_privoxy - Win32 Release" -# Name "vc_privoxy - Win32 Debug" -# Name "vc_privoxy - Win32 Release with Win32 threads" -# Name "vc_privoxy - Win32 Debug with Win32 threads" -# Begin Group "JunkBuster" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\actionlist.h -# End Source File -# Begin Source File - -SOURCE=.\actions.c -# End Source File -# Begin Source File - -SOURCE=.\actions.h -# End Source File -# Begin Source File - -SOURCE=.\cgi.c -# End Source File -# Begin Source File - -SOURCE=.\cgi.h -# End Source File -# Begin Source File - -SOURCE=.\cgiedit.c -# End Source File -# Begin Source File - -SOURCE=.\cgiedit.h -# End Source File -# Begin Source File - -SOURCE=.\cgisimple.c -# End Source File -# Begin Source File - -SOURCE=.\cgisimple.h -# End Source File -# Begin Source File - -SOURCE=.\config.h -# End Source File -# Begin Source File - -SOURCE=.\deanimate.c -# End Source File -# Begin Source File - -SOURCE=.\deanimate.h -# End Source File -# Begin Source File - -SOURCE=.\errlog.c -# End Source File -# Begin Source File - -SOURCE=.\errlog.h -# End Source File -# Begin Source File - -SOURCE=.\filters.c -# End Source File -# Begin Source File - -SOURCE=.\filters.h -# End Source File -# Begin Source File - -SOURCE=.\jcc.c -# End Source File -# Begin Source File - -SOURCE=.\jcc.h -# End Source File -# Begin Source File - -SOURCE=.\loadcfg.c -# End Source File -# Begin Source File - -SOURCE=.\loadcfg.h -# End Source File -# Begin Source File - -SOURCE=.\loaders.c -# End Source File -# Begin Source File - -SOURCE=.\loaders.h -# End Source File -# Begin Source File - -SOURCE=.\parsers.c -# End Source File -# Begin Source File - -SOURCE=.\parsers.h -# End Source File -# Begin Source File - -SOURCE=.\project.h -# End Source File -# Begin Source File - -SOURCE=.\urlmatch.c -# End Source File -# Begin Source File - -SOURCE=.\urlmatch.h -# End Source File -# End Group -# Begin Group "Win32" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\cygwin.h -# End Source File -# Begin Source File - -SOURCE=.\w32log.c -# End Source File -# Begin Source File - -SOURCE=.\w32log.h -# End Source File -# Begin Source File - -SOURCE=.\w32res.h -# End Source File -# Begin Source File - -SOURCE=.\w32taskbar.c -# End Source File -# Begin Source File - -SOURCE=.\w32taskbar.h -# End Source File -# Begin Source File - -SOURCE=.\win32.c -# End Source File -# Begin Source File - -SOURCE=.\win32.h -# End Source File -# Begin Source File - -SOURCE=.\w32svrapi.c -# End Source File -# Begin Source File - -SOURCE=.\w32svrapi.h -# End Source File -# End Group -# Begin Group "Resources" - -# PROP Default_Filter "rc,ico,bmp" -# Begin Source File - -SOURCE=.\icons\ico00001.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\ico00002.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\ico00003.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\ico00004.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\ico00005.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\ico00006.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\ico00007.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\ico00008.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\idle.ico -# End Source File -# Begin Source File - -SOURCE=.\icons\privoxy.ico -# End Source File -# Begin Source File - -SOURCE=.\w32.rc -# End Source File -# End Group -# Begin Group "PCRE" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\pcre\chartables.c - -!IF "$(CFG)" == "vc_privoxy - Win32 Release" - -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_privoxy - Win32 Debug" - -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_privoxy - Win32 Release with Win32 threads" - -# PROP BASE Exclude_From_Build 1 -# PROP Exclude_From_Build 1 - -!ELSEIF "$(CFG)" == "vc_privoxy - Win32 Debug with Win32 threads" - -# PROP BASE Exclude_From_Build 1 -# PROP Exclude_From_Build 1 - -!ENDIF - -# End Source File -# Begin Source File - -SOURCE=.\pcre\config.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\get.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\internal.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\maketables.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcre.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcre.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcreposix.c -# End Source File -# Begin Source File - -SOURCE=.\pcre\pcreposix.h -# End Source File -# Begin Source File - -SOURCE=.\pcre\study.c -# End Source File -# End Group -# Begin Group "PCRS" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\pcrs.c -# End Source File -# Begin Source File - -SOURCE=.\pcrs.h -# End Source File -# End Group -# Begin Group "Sockets" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\gateway.c -# End Source File -# Begin Source File - -SOURCE=.\gateway.h -# End Source File -# Begin Source File - -SOURCE=.\jbsockets.c -# End Source File -# Begin Source File - -SOURCE=.\jbsockets.h -# End Source File -# End Group -# Begin Group "Utilities" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\encode.c -# End Source File -# Begin Source File - -SOURCE=.\encode.h -# End Source File -# Begin Source File - -SOURCE=.\list.c -# End Source File -# Begin Source File - -SOURCE=.\list.h -# End Source File -# Begin Source File - -SOURCE=.\miscutil.c -# End Source File -# Begin Source File - -SOURCE=.\miscutil.h -# End Source File -# Begin Source File - -SOURCE=.\ssplit.c -# End Source File -# Begin Source File - -SOURCE=.\ssplit.h -# End Source File -# End Group -# End Target -# End Project diff --git a/external/privoxy/vc_privoxy.dsw b/external/privoxy/vc_privoxy.dsw deleted file mode 100644 index 9685de2..0000000 --- a/external/privoxy/vc_privoxy.dsw +++ /dev/null @@ -1,59 +0,0 @@ -Microsoft Developer Studio Workspace File, Format Version 5.00 -# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE! - -############################################################################### - -Project: "vc_console"=".\vc_console.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ - Begin Project Dependency - Project_Dep_Name vc_dftables - End Project Dependency -}}} - -############################################################################### - -Project: "vc_dftables"=".\pcre\vc_dftables.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Project: "vc_privoxy"=".\vc_privoxy.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ - Begin Project Dependency - Project_Dep_Name vc_dftables - End Project Dependency -}}} - -############################################################################### - -Global: - -Package=<5> -{{{ -}}} - -Package=<3> -{{{ -}}} - -############################################################################### - diff --git a/external/privoxy/w32.rc b/external/privoxy/w32.rc deleted file mode 100644 index 93b518a..0000000 --- a/external/privoxy/w32.rc +++ /dev/null @@ -1,343 +0,0 @@ -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32.rc,v $ - * - * Purpose : Windows GUI resource script. - * - * Copyright : Written by and Copyright (C) 2001-2002 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32.rc,v $ - * Revision 1.22 2009/01/01 15:09:23 ler762 - * Change the Windows taskbar icon when privoxy is toggled off. - * - * Revision 1.21 2008/11/02 14:37:47 ler762 - * commit the part of the patches I've been using that were written by torford and gjmurphy - * [ 1824315 ] Minor code cleanup - * [ 1781135 ] Patch - Add clear log, select all, and Accelerators for w32 - * http://sourceforge.net/tracker/?func=detail&atid=311118&aid=1781135&group_i… - * The full patch adds control keys A(select all), C(copy) and D(delete all) to the - * Privoxy log window menu. Select all and copy work for me without the patch - * (albeit without showing the accelerator keys on the menu), so the only part of the - * patch I've been using for the last year or so has been the ctrl-d to delete - * everything in the Privoxy log window. - * - * Revision 1.20 2006/08/18 02:06:25 david__schmidt - * Making icon go back to blue when idle. - * See: bug #967648. - * - * Revision 1.19 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.17.2.1 2002/08/21 17:58:40 oes - * - Reorder of Win32 menu - * - "Show Privoxy Window" now a toggle - * - Temp kludge to let user and default action file be edited through win32 GUI (FR 592080) - * - * Revision 1.17 2002/03/31 17:19:00 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.16 2002/03/26 22:57:44 jongfoster - * Web server name should begin www. - * - * Revision 1.15 2002/03/24 14:29:25 jongfoster - * Renaming icon file - * - * Revision 1.14 2002/03/24 12:07:36 jongfoster - * Consistern name for filters file - * - * Revision 1.13 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.12 2001/07/30 22:16:07 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.11 2001/07/21 17:53:41 jongfoster - * Adding version information block. - * - * Revision 1.10 2001/07/19 19:14:19 haroon - * - Removed all #ifdef PCRS. The .rc file extension had eluded Andreas. - * - * Revision 1.9 2001/06/07 23:08:54 jongfoster - * Forward and ACL edit options removed. - * Config edit option renamed from "&Junkbuster" to "&Configuration". - * - * Revision 1.8 2001/05/31 21:37:11 jongfoster - * GUI changes to rename "permissions file" to "actions file". - * - * Revision 1.7 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.6 2001/05/26 14:15:18 jongfoster - * Cosmetic fix: // -> block comment - * - * Revision 1.5 2001/05/26 13:24:31 jongfoster - * New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor. - * This #define cannot be set from ./configure - there's no point, it - * doesn't work yet. See feature request # 425722 - * (I missed this file in my original checkin) - * - * Revision 1.4 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.3 2001/05/25 22:33:40 jongfoster - * CRLF->LF - * - * Revision 1.2 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.1.1.1 2001/05/15 13:59:07 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - -#include "config.h" - -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> - -#include "w32res.h" - -#ifdef __MINGW32__ -#include "cygwin.h" -#endif - -/**************************************************************************** - * Language-neutral resources - ****************************************************************************/ - -#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_NEU) -#ifdef _WIN32 -/* LANGUAGE LANG_NEUTRAL, SUBLANG_NEUTRAL */ -#pragma code_page(1252) -#endif /* _WIN32 */ - -/* - * Icons - * - * Icon with lowest ID value placed first to ensure application icon - * remains consistent on all systems. - */ -IDI_MAINICON ICON DISCARDABLE "icons/privoxy.ico" -IDI_ANIMATED1 ICON DISCARDABLE "icons/ico00001.ico" -IDI_ANIMATED2 ICON DISCARDABLE "icons/ico00002.ico" -IDI_ANIMATED3 ICON DISCARDABLE "icons/ico00003.ico" -IDI_ANIMATED4 ICON DISCARDABLE "icons/ico00004.ico" -IDI_ANIMATED5 ICON DISCARDABLE "icons/ico00005.ico" -IDI_ANIMATED6 ICON DISCARDABLE "icons/ico00006.ico" -IDI_ANIMATED7 ICON DISCARDABLE "icons/ico00007.ico" -IDI_ANIMATED8 ICON DISCARDABLE "icons/ico00008.ico" -IDI_IDLE ICON DISCARDABLE "icons/privoxy.ico" -IDI_OFF ICON DISCARDABLE "icons/off.ico" - -#endif /* Neutral resources */ - - -/**************************************************************************** - * English (U.S.) resources - ****************************************************************************/ - -#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU) -#ifdef _WIN32 -/* LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US */ -#pragma code_page(1252) -#endif /* def _WIN32 */ - -/* - * File Version - */ -#ifndef _MAC - -VS_VERSION_INFO VERSIONINFO - FILEVERSION VERSION_MAJOR,VERSION_MINOR,VERSION_POINT,0 - PRODUCTVERSION VERSION_MAJOR,VERSION_MINOR,VERSION_POINT,0 - FILEFLAGSMASK 0x3fL -#ifdef _DEBUG - FILEFLAGS 0x1L -#else - FILEFLAGS 0x0L -#endif - FILEOS 0x40004L - FILETYPE 0x1L - FILESUBTYPE 0x0L -BEGIN - BLOCK "StringFileInfo" - BEGIN - BLOCK "040904b0" - BEGIN - VALUE "CompanyName", "The Privoxy team - www.privoxy.org\0" - VALUE "FileDescription", "Privoxy\0" - VALUE "FileVersion", VERSION "\0" - VALUE "InternalName", "Privoxy\0" - VALUE "LegalCopyright", "Distributed under the GNU GPL\0" - VALUE "OriginalFilename", "privoxy.exe\0" - VALUE "ProductName", "Privoxy\0" - VALUE "ProductVersion", VERSION "\0" - END - END - BLOCK "VarFileInfo" - BEGIN - VALUE "Translation", 0x409, 1200 - END -END - -#endif /* ndef _MAC */ - - -/* - * Menus - */ - -IDR_TRAYMENU MENU DISCARDABLE -BEGIN - POPUP "Popup" - BEGIN - MENUITEM "E&xit Privoxy", ID_FILE_EXIT - MENUITEM SEPARATOR - POPUP "E&dit.." - BEGIN - MENUITEM "&Main Configuration", ID_TOOLS_EDITCONFIG - MENUITEM "&Default Actions", ID_TOOLS_EDITDEFAULTACTIONS - MENUITEM "&User Actions", ID_TOOLS_EDITUSERACTIONS - MENUITEM "&Filters", ID_TOOLS_EDITFILTERS -#ifdef FEATURE_TRUST - MENUITEM "&Trust list", ID_TOOLS_EDITTRUST -#endif /* def FEATURE_TRUST */ - END - MENUITEM SEPARATOR -#ifdef FEATURE_TOGGLE - MENUITEM "&Enable", ID_TOGGLE_ENABLED, CHECKED -#endif /* def FEATURE_TOGGLE */ - MENUITEM "Show Privoxy &Window", ID_TOGGLE_SHOWWINDOW, CHECKED - END -END - -IDR_LOGVIEW MENU DISCARDABLE -BEGIN - POPUP "&File" - BEGIN - MENUITEM "E&xit", ID_FILE_EXIT - END - POPUP "&Edit" - BEGIN - MENUITEM "Copy", ID_EDIT_COPY - END - POPUP "&View" - BEGIN - MENUITEM "&Clear Log\tCtrl+D", ID_VIEW_CLEARLOG - MENUITEM SEPARATOR - MENUITEM "&Log Messages", ID_VIEW_LOGMESSAGES, CHECKED - MENUITEM "Message &Highlighting", ID_VIEW_MESSAGEHIGHLIGHTING, CHECKED - MENUITEM "Limit &Buffer Size", ID_VIEW_LIMITBUFFERSIZE, CHECKED - MENUITEM "&Activity Animation", ID_VIEW_ACTIVITYANIMATION, CHECKED - END - POPUP "&Options" - BEGIN -#ifdef FEATURE_TOGGLE - MENUITEM "&Enable", ID_TOGGLE_ENABLED, CHECKED - MENUITEM SEPARATOR -#endif /* def FEATURE_TOGGLE */ - MENUITEM "Edit Main &Configuration", ID_TOOLS_EDITCONFIG - MENUITEM "Edit &Default Actions", ID_TOOLS_EDITDEFAULTACTIONS - MENUITEM "Edit &User Actions", ID_TOOLS_EDITUSERACTIONS - MENUITEM "Edit &Filters", ID_TOOLS_EDITFILTERS -#ifdef FEATURE_TRUST - MENUITEM "Edit &Trust list", ID_TOOLS_EDITTRUST -#endif /* def FEATURE_TRUST */ - END - POPUP "&Help" - BEGIN - MENUITEM "Privoxy &FAQ", ID_HELP_FAQ - MENUITEM "Privoxy &Manual", ID_HELP_MANUAL - MENUITEM "GNU &General Public Licence", ID_HELP_GPL - MENUITEM SEPARATOR - MENUITEM "Privoxy Status...", ID_HELP_STATUS - MENUITEM SEPARATOR - MENUITEM "About Privoxy...", ID_HELP_ABOUT - END -END - -IDR_POPUP_SELECTION MENU DISCARDABLE -BEGIN - POPUP "Popup" - BEGIN - MENUITEM "&Copy", ID_EDIT_COPY - END -END - - -/* - * Accelerators - */ - -IDR_ACCELERATOR ACCELERATORS DISCARDABLE -BEGIN - "C", ID_EDIT_COPY, VIRTKEY, CONTROL, NOINVERT - "D", ID_VIEW_CLEARLOG, VIRTKEY, CONTROL, NOINVERT -END - -#endif /* English (U.S.) resources */ diff --git a/external/privoxy/w32log.c b/external/privoxy/w32log.c deleted file mode 100644 index e5df8b0..0000000 --- a/external/privoxy/w32log.c +++ /dev/null @@ -1,1480 +0,0 @@ -const char w32log_rcs[] = "$Id: w32log.c,v 1.33 2009/03/09 19:02:09 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32log.c,v $ - * - * Purpose : Functions for creating and destroying the log window, - * ouputting strings, processing messages and so on. - * - * Copyright : Written by and Copyright (C) 2001-2009 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 1999 Adam Lock - * <locka(a)iol.ie> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32log.c,v $ - * Revision 1.33 2009/03/09 19:02:09 fabiankeil - * Request the default charset in LogPutStringNoMatch(). - * Submitted by Burberry in #2674342 as fix for #2662382. - * - * Revision 1.32 2009/03/09 18:32:48 fabiankeil - * Use the Privoxy icon in the alt+tab window. - * Patch submitted by Burberry in #2674342. - * - * Revision 1.31 2009/03/07 17:58:02 fabiankeil - * Fix two mingw32-only buffer overflows. Note that triggering - * them requires control over the configuration file in which - * case all bets are off anyway. - * - * Revision 1.30 2009/01/01 15:09:23 ler762 - * Change the Windows taskbar icon when privoxy is toggled off. - * - * Revision 1.29 2008/12/20 15:27:40 ler762 - * The crunch log message format changed, so update the strings to highlight - * in the log window. - * - * Revision 1.28 2008/11/02 14:37:47 ler762 - * commit the part of the patches I've been using that were written by torford and gjmurphy - * [ 1824315 ] Minor code cleanup - * [ 1781135 ] Patch - Add clear log, select all, and Accelerators for w32 - * http://sourceforge.net/tracker/?func=detail&atid=311118&aid=1781135&group_i… - * The full patch adds control keys A(select all), C(copy) and D(delete all) to the - * Privoxy log window menu. Select all and copy work for me without the patch - * (albeit without showing the accelerator keys on the menu), so the only part of the - * patch I've been using for the last year or so has been the ctrl-d to delete - * everything in the Privoxy log window. - * - * Revision 1.27 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.25.2.5 2003/04/04 12:48:51 oes - * Fixed bug #711865: - * - Made tray menu correctly reflect initial window visibility state - * - Hopefully fixed problem where log window contents wasn't visible - * until vertical scroll bar was clicked. Thanks to Guy for the fix! - * - * Revision 1.25.2.4 2003/03/11 11:53:59 oes - * Cosmetic: Renamed cryptic variable - * - * Revision 1.25.2.3 2002/11/20 14:39:05 oes - * Fixed compiler warning - * - * Revision 1.25.2.2 2002/09/25 15:23:10 oes - * Uncheck the "Show Privoxy Window" taskbar menu item when window gets minimized. Fixes bug #606804 - * - * Revision 1.25.2.1 2002/08/21 17:59:05 oes - * - "Show Privoxy Window" now a toggle - * - Temp kludge to let user and default action file be edited through win32 GUI (FR 592080) - * - * Revision 1.25 2002/04/04 00:36:36 gliptak - * always use pcre for matching - * - * Revision 1.24 2002/03/31 17:19:00 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.23 2002/03/26 22:57:10 jongfoster - * Web server name should begin www. - * - * Revision 1.22 2002/03/24 12:48:23 jongfoster - * Fixing doc links - * - * Revision 1.21 2002/03/24 12:07:35 jongfoster - * Consistern name for filters file - * - * Revision 1.20 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.19 2002/01/17 21:04:17 jongfoster - * Replacing hard references to the URL of the config interface - * with #defines from project.h - * - * Revision 1.18 2001/11/30 23:37:24 jongfoster - * Renaming the Win32 config file to config.txt - this is almost the - * same as the corresponding UNIX name "config" - * - * Revision 1.17 2001/11/16 00:46:31 jongfoster - * Fixing compiler warnings - * - * Revision 1.16 2001/08/01 19:58:12 jongfoster - * Fixing documentation filenames in help menu, and making status - * option work without needing the "Junkbuster Status.URL" file. - * - * Revision 1.15 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.14 2001/07/29 18:47:05 jongfoster - * Adding missing #include "loadcfg.h" - * - * Revision 1.13 2001/07/19 19:15:14 haroon - * - Added a FIXME for EditFile but didn't fix :-) - * - * Revision 1.12 2001/07/13 14:04:59 oes - * Removed all #ifdef PCRS - * - * Revision 1.11 2001/06/07 23:08:12 jongfoster - * Forward and ACL edit options removed. - * - * Revision 1.10 2001/05/31 21:37:11 jongfoster - * GUI changes to rename "permissions file" to "actions file". - * - * Revision 1.9 2001/05/31 17:33:13 oes - * - * CRLF -> LF - * - * Revision 1.8 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.7 2001/05/26 01:26:34 jongfoster - * New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor. - * This #define cannot be set from ./configure - there's no point, it - * doesn't work yet. See feature request # 425722 - * - * Revision 1.6 2001/05/26 00:31:30 jongfoster - * Fixing compiler warning about comparing signed/unsigned. - * - * Revision 1.5 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.4 2001/05/22 18:56:28 oes - * CRLF -> LF - * - * Revision 1.3 2001/05/20 15:07:54 jongfoster - * File is now ignored if _WIN_CONSOLE is defined. - * - * Revision 1.2 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.1.1.1 2001/05/15 13:59:07 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <assert.h> -#include <stdio.h> - -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> -#include <richedit.h> - -#include "project.h" -#include "w32log.h" -#include "w32taskbar.h" -#include "win32.h" -#include "w32res.h" -#include "jcc.h" -#include "miscutil.h" -#include "errlog.h" -#include "loadcfg.h" - -const char w32res_h_rcs[] = W32RES_H_VERSION; - -#ifdef __MINGW32__ -#include "cygwin.h" -const char cygwin_h_rcs[] = CYGWIN_H_VERSION; -#endif - -const char w32log_h_rcs[] = W32LOG_H_VERSION; - -#ifndef _WIN_CONSOLE /* entire file */ - -/* - * Timers and the various durations - */ -#define TIMER_ANIM_ID 1 -#define TIMER_ANIM_TIME 100 -#define TIMER_ANIMSTOP_ID 2 -#define TIMER_ANIMSTOP_TIME 1000 -#define TIMER_CLIPBUFFER_ID 3 -#define TIMER_CLIPBUFFER_TIME 1000 -#define TIMER_CLIPBUFFER_FORCE_ID 4 -#define TIMER_CLIPBUFFER_FORCE_TIME 5000 - -/* - * Styles of text that can be output - */ -#define STYLE_NONE 0 -#define STYLE_HIGHLIGHT 1 -#define STYLE_LINK 2 -#define STYLE_HEADER 3 - -/* - * Number of frames of animation in tray activity sequence - */ -#define ANIM_FRAMES 8 - -#define DEFAULT_MAX_BUFFER_LINES 200 -#define DEFAULT_LOG_FONT_NAME "MS Sans Serif" -#define DEFAULT_LOG_FONT_SIZE 8 - -/* - * These values affect the way the log window behaves, they should be read - * from a file but for the moment, they are hardcoded here. Some options are - * configurable through the UI. - */ - -/* Indicates whether task bar shows activity animation */ -BOOL g_bShowActivityAnimation = 1; - -/* Indicates whether the log window is shown */ -BOOL g_bShowLogWindow = 1; - -/* Indicates if the log window appears on the task bar */ -BOOL g_bShowOnTaskBar = 0; - -/* Indicates whether closing the log window really just hides it */ -BOOL g_bCloseHidesWindow = 1; - -/* Indicates if messages are logged at all */ -BOOL g_bLogMessages = 1; - -/* Indicates whether log messages are highlighted */ -BOOL g_bHighlightMessages = 1; - -/* Indicates if buffer is limited in size */ -BOOL g_bLimitBufferSize = 1; - -/* Maximum number of lines allowed in buffer when limited */ -int g_nMaxBufferLines = DEFAULT_MAX_BUFFER_LINES; - -/* Font to use */ -char g_szFontFaceName[32] = DEFAULT_LOG_FONT_NAME; - -/* Size of font to use */ -int g_nFontSize = DEFAULT_LOG_FONT_SIZE; - - -/* FIXME: this is a kludge */ - -const char * g_default_actions_file = NULL; -const char * g_user_actions_file = NULL; -const char * g_re_filterfile = NULL; -#ifdef FEATURE_TRUST -const char * g_trustfile = NULL; -#endif /* def FEATURE_TRUST */ - -/* FIXME: end kludge */ - -/* Regular expression for detected URLs */ -#define RE_URL "http:[^ \n\r]*" - -/* - * Regular expressions that are used to perform highlight in the log window - */ -static struct _Pattern -{ - const char *str; - int style; - regex_t buffer; -} patterns_to_highlight[] = -{ - /* url headers */ - { RE_URL, STYLE_LINK }, -/* { "[a-zA-Z0-9]+\\.[a-zA-Z0-9]+\\.[a-zA-Z0-9]+\\.[^ \n\r]*", STYLE_LINK }, */ - /* interesting text to highlight */ - /* see jcc.c crunch_reason for the full list */ - { "Crunch: Blocked:", STYLE_HIGHLIGHT }, - { "Crunch: Untrusted", STYLE_HIGHLIGHT }, - { "Crunch: Redirected:", STYLE_HIGHLIGHT }, - { "Crunch: DNS failure", STYLE_HIGHLIGHT }, - { "Crunch: Forwarding failed", STYLE_HIGHLIGHT }, - { "Crunch: Connection failure", STYLE_HIGHLIGHT }, - { "Crunch: Out of memory", STYLE_HIGHLIGHT }, - /* what are all the possible error strings?? */ - { "Error:", STYLE_HIGHLIGHT }, - /* http headers */ - { "referer:", STYLE_HEADER }, - { "proxy-connection:", STYLE_HEADER }, - { "proxy-agent:", STYLE_HEADER }, - { "user-agent:", STYLE_HEADER }, - { "host:", STYLE_HEADER }, - { "accept:", STYLE_HEADER }, - { "accept-encoding:", STYLE_HEADER }, - { "accept-language:", STYLE_HEADER }, - { "accept-charset:", STYLE_HEADER }, - { "accept-ranges:", STYLE_HEADER }, - { "date:", STYLE_HEADER }, - { "cache-control:", STYLE_HEADER }, - { "cache-last-checked:", STYLE_HEADER }, - { "connection:", STYLE_HEADER }, - { "content-type", STYLE_HEADER }, - { "content-length", STYLE_HEADER }, - { "cookie", STYLE_HEADER }, - { "last-modified:", STYLE_HEADER }, - { "pragma:", STYLE_HEADER }, - { "server:", STYLE_HEADER }, - { "etag:", STYLE_HEADER }, - { "expires:", STYLE_HEADER }, - { "warning:", STYLE_HEADER }, - /* this is the terminator statement - do not delete! */ - { NULL, STYLE_NONE } -}; - -/* - * Public variables - */ -HWND g_hwndLogFrame; -HICON g_hiconApp; - -/* - * Private variables - */ -static CRITICAL_SECTION g_criticalsection; -static HWND g_hwndTray; -static HWND g_hwndLogBox; -static WNDPROC g_fnLogBox; -static HICON g_hiconAnim[ANIM_FRAMES]; -static HICON g_hiconIdle; -static HICON g_hiconOff; -static int g_nAnimFrame; -static BOOL g_bClipPending = FALSE; -static int g_nRichEditVersion = 0; - -/* - * Private functions - */ -static HWND CreateLogWindow(HINSTANCE hInstance, int nCmdShow); -static HWND CreateHiddenLogOwnerWindow(HINSTANCE hInstance); -static LRESULT CALLBACK LogWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam); -static LRESULT CALLBACK LogOwnerWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam); -static LRESULT CALLBACK LogRichEditProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam); -static BOOL InitRichEdit(void); -static void LogClipBuffer(void); -static void LogCreatePatternMatchingBuffers(void); -static void LogDestroyPatternMatchingBuffers(void); -static int LogPutStringNoMatch(const char *pszText, int style); -static void SetIdleIcon(void); - - -/********************************************************************* - * - * Function : InitLogWindow - * - * Description : Initialise the log window. - * - * Parameters : None - * - * Returns : Always TRUE (there should be error checking on the resources). - * - *********************************************************************/ -BOOL InitLogWindow(void) -{ - int i; - - /* Load the icons */ - g_hiconIdle = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_IDLE)); - g_hiconOff = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_OFF)); - for (i = 0; i < ANIM_FRAMES; i++) - { - g_hiconAnim[i] = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_ANIMATED1 + i)); - } - g_hiconApp = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_MAINICON)); - - /* Create the user interface */ - g_hwndLogFrame = CreateLogWindow(g_hInstance, g_nCmdShow); - g_hwndTray = CreateTrayWindow(g_hInstance); - TrayAddIcon(g_hwndTray, 1, g_hiconApp, "Privoxy"); - - /* Create pattern matching buffers (for highlighting */ - LogCreatePatternMatchingBuffers(); - - /* Create a critical section to protect multi-threaded access to certain things */ - InitializeCriticalSection(&g_criticalsection); - - return TRUE; - -} - - -/********************************************************************* - * - * Function : TermLogWindow - * - * Description : Cleanup the logwindow. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void TermLogWindow(void) -{ - int i; - - LogDestroyPatternMatchingBuffers(); - - TrayDeleteIcon(g_hwndTray, 1); - DeleteObject(g_hiconApp); - DeleteObject(g_hiconIdle); - DeleteObject(g_hiconOff); - for (i = 0; i < ANIM_FRAMES; i++) - { - DeleteObject(g_hiconAnim[i]); - } - -} - - -/********************************************************************* - * - * Function : LogCreatePatternMatchingBuffers - * - * Description : Compile the pattern matching buffers. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void LogCreatePatternMatchingBuffers(void) -{ - int i; - for (i = 0; patterns_to_highlight[i].str != NULL; i++) - { - regcomp(&patterns_to_highlight[i].buffer, patterns_to_highlight[i].str, REG_ICASE); - } -} - - -/********************************************************************* - * - * Function : LogDestroyPatternMatchingBuffers - * - * Description : Free up the pattern matching buffers. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void LogDestroyPatternMatchingBuffers(void) -{ - int i; - for (i = 0; patterns_to_highlight[i].str != NULL; i++) - { - regfree(&patterns_to_highlight[i].buffer); - } -} - - -/********************************************************************* - * - * Function : LogGetURLUnderCursor - * - * Description : Returns the URL from under the cursor (remember to free it!). - * - * Parameters : None - * - * Returns : NULL or a pointer to an URL string. - * - *********************************************************************/ -char *LogGetURLUnderCursor(void) -{ - char *szResult = NULL; - regex_t re; - POINT ptCursor; - POINTL ptl; - DWORD nPos; - DWORD nWordStart = 0; - DWORD nWordEnd = 0; - - regcomp(&re, RE_URL, REG_ICASE); - - /* Get the position of the cursor over the text window */ - GetCursorPos(&ptCursor); - ScreenToClient(g_hwndLogBox, &ptCursor); - ptl.x = ptCursor.x; - ptl.y = ptCursor.y; - - /* Search backwards and fowards to obtain the word that is highlighted */ - nPos = LOWORD(SendMessage(g_hwndLogBox, EM_CHARFROMPOS, 0, (LPARAM) &ptl)); - nWordStart = SendMessage(g_hwndLogBox, EM_FINDWORDBREAK, WB_LEFT, nPos); - nWordEnd = SendMessage(g_hwndLogBox, EM_FINDWORDBREAK, WB_RIGHTBREAK, nPos); - - /* Compare the string to the pattern */ - if (nWordEnd > nWordStart) - { - TEXTRANGE range; - regmatch_t match; - - range.chrg.cpMin = nWordStart; - range.chrg.cpMax = nWordEnd; - range.lpstrText = (LPSTR)zalloc(nWordEnd - nWordStart + 1); - SendMessage(g_hwndLogBox, EM_GETTEXTRANGE, 0, (LPARAM) &range); - - if (regexec(&re, range.lpstrText, 1, &match, 0) == 0) - { - szResult = range.lpstrText; - } - else - { - free(range.lpstrText); - } - - regfree(&re); - } - return szResult; - -} - - -/********************************************************************* - * - * Function : LogPutString - * - * Description : Inserts text into the logging window. This is really - * a regexp aware wrapper function to `LogPutStringNoMatch'. - * - * Parameters : - * 1 : pszText = pointer to string going to the log window - * - * Returns : 1 => success, else the return code from `LogPutStringNoMatch'. - * FIXME: this is backwards to the rest of IJB and to common - * programming practice. Please use 0 => success instead. - * - *********************************************************************/ -int LogPutString(const char *pszText) -{ - int i; - int result = 0; - - if (pszText == NULL || strlen(pszText) == 0) - { - return 1; - } - - if (!g_bLogMessages) - { - return 1; - } - - /* Critical section stops multiple threads doing nasty interactions that - * foul up the highlighting and output. - */ - EnterCriticalSection(&g_criticalsection); - - if (g_bHighlightMessages) - { - regmatch_t match; - - /* First things first, regexp scan for various things that we would like highlighted */ - for (i = 0; patterns_to_highlight[i].str != NULL; i++) - { - if (regexec(&patterns_to_highlight[i].buffer, pszText, 1, &match, 0) == 0) - { - char *pszBefore = NULL; - char *pszMatch = NULL; - char *pszAfter = NULL; - int nMatchSize; - - /* Split the string up into pieces representing the strings, before - at and after the matching pattern - */ - if (match.rm_so > 0) - { - pszBefore = (char *)malloc((match.rm_so + 1) * sizeof(char)); - memset(pszBefore, 0, (match.rm_so + 1) * sizeof(char)); - strncpy(pszBefore, pszText, match.rm_so); - } - if (match.rm_eo < (regoff_t)strlen(pszText)) - { - pszAfter = strdup(&pszText[match.rm_eo]); - } - nMatchSize = match.rm_eo - match.rm_so; - pszMatch = (char *)malloc(nMatchSize + 1); - strncpy(pszMatch, &pszText[match.rm_so], nMatchSize); - pszMatch[nMatchSize] = '\0'; - - /* Recursively call LogPutString */ - if (pszBefore) - { - LogPutString(pszBefore); - free(pszBefore); - } - if (pszMatch) - { - LogPutStringNoMatch(pszMatch, patterns_to_highlight[i].style); - free(pszMatch); - } - if (pszAfter) - { - LogPutString(pszAfter); - free(pszAfter); - } - - result = 1; - goto end; - } - } - } - - result = LogPutStringNoMatch(pszText, STYLE_NONE); - -end: - LeaveCriticalSection(&g_criticalsection); - - return result; - -} - - -/********************************************************************* - * - * Function : LogPutStringNoMatch - * - * Description : Puts a string into the logging window. - * - * Parameters : - * 1 : pszText = pointer to string going to the log window - * 2 : style = STYLE_NONE, STYLE_HEADER, STYLE_HIGHLIGHT, or STYLE_LINK - * - * Returns : Always 1 => success. - * FIXME: this is backwards to the rest of IJB and to common - * programming practice. Please use 0 => success instead. - * - *********************************************************************/ -int LogPutStringNoMatch(const char *pszText, int style) -{ - CHARRANGE range; - CHARFORMAT format; - int nTextLength; - - assert(g_hwndLogBox); - if (g_hwndLogBox == NULL) - { - return 1; - } - - /* TODO preserve existing selection */ - - /* Go to the end of the text */ - nTextLength = GetWindowTextLength(g_hwndLogBox); - range.cpMin = nTextLength; - range.cpMax = nTextLength; - SendMessage(g_hwndLogBox, EM_EXSETSEL, 0, (LPARAM) &range); - - /* Apply a formatting style */ - memset(&format, 0, sizeof(format)); - format.cbSize = sizeof(format); - format.dwMask = CFM_BOLD | CFM_UNDERLINE | CFM_STRIKEOUT | - CFM_ITALIC | CFM_COLOR | CFM_FACE | CFM_SIZE | CFM_CHARSET; - format.bCharSet = DEFAULT_CHARSET; - format.yHeight = (g_nFontSize * 1440) / 72; - strlcpy(format.szFaceName, g_szFontFaceName, sizeof(format.szFaceName)); - if (style == STYLE_NONE) - { - /* DO NOTHING */ - format.dwEffects |= CFE_AUTOCOLOR; - } - else if (style == STYLE_HEADER) - { - format.dwEffects |= CFE_AUTOCOLOR | CFE_ITALIC; - } - else if (style == STYLE_HIGHLIGHT) - { - format.dwEffects |= CFE_AUTOCOLOR | CFE_BOLD; - } - else if (style == STYLE_LINK) - { - format.dwEffects |= CFE_UNDERLINE; - format.crTextColor = RGB(0, 0, 255); - } - SendMessage(g_hwndLogBox, EM_SETCHARFORMAT, SCF_SELECTION, (LPARAM) &format); - - /* Append text to the end */ - SendMessage(g_hwndLogBox, EM_REPLACESEL, FALSE, (LPARAM) pszText); - - /* TODO Restore the old selection */ - - /* Purge buffer */ - if (strchr(pszText, '\n') != NULL) - { - SetTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_ID, TIMER_CLIPBUFFER_TIME, NULL); - if (!g_bClipPending) - { - /* Set the force clip timer going. This timer ensures clipping is done - intermittently even when there is a sustained burst of logging - */ - SetTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_FORCE_ID, TIMER_CLIPBUFFER_FORCE_TIME, NULL); - } - g_bClipPending = TRUE; - } - - return 1; - -} - - -/********************************************************************* - * - * Function : LogShowActivity - * - * Description : Start the spinner. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void LogShowActivity(void) -{ - /* Start some activity timers */ - if (g_bShowActivityAnimation) - { - SetTimer(g_hwndLogFrame, TIMER_ANIM_ID, TIMER_ANIM_TIME, NULL); - SetTimer(g_hwndLogFrame, TIMER_ANIMSTOP_ID, TIMER_ANIMSTOP_TIME, NULL); - } - -} - - -/********************************************************************* - * - * Function : LogClipBuffer - * - * Description : Prunes old lines from the log. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void LogClipBuffer(void) -{ - int nLines = SendMessage(g_hwndLogBox, EM_GETLINECOUNT, 0, 0); - if (g_bLimitBufferSize && nLines > g_nMaxBufferLines) - { - /* Compute the range representing the lines to be deleted */ - LONG nLastLineToDelete = nLines - g_nMaxBufferLines; - LONG nLastChar = SendMessage(g_hwndLogBox, EM_LINEINDEX, nLastLineToDelete, 0); - CHARRANGE range; - range.cpMin = 0; - range.cpMax = nLastChar; - - /* TODO get current selection */ - - /* TODO adjust and clip old selection against range to be deleted */ - - /* Select range and erase it (turning off autoscroll to prevent - nasty scrolling) */ - SendMessage(g_hwndLogBox, EM_SETOPTIONS, ECOOP_XOR, ECO_AUTOVSCROLL); - SendMessage(g_hwndLogBox, EM_EXSETSEL, 0, (LPARAM) &range); - SendMessage(g_hwndLogBox, EM_REPLACESEL, FALSE, (LPARAM) ""); - SendMessage(g_hwndLogBox, EM_SETOPTIONS, ECOOP_XOR, ECO_AUTOVSCROLL); - - /* reposition (back to) the end of the log content */ - range.cpMin = SendMessage (g_hwndLogBox, WM_GETTEXTLENGTH, 0, 0); - range.cpMax = -1; - SendMessage(g_hwndLogBox, EM_EXSETSEL, 0, (LPARAM) &range); - - /* restore vertical ScrollBar stuff (messed up by AUTOVSCROLL) */ - SendMessage (g_hwndLogBox, EM_SCROLL, SB_LINEDOWN, 0); - - } - -} - - -/********************************************************************* - * - * Function : CreateHiddenLogOwnerWindow - * - * Description : Creates a hidden owner window that stops the log - * window appearing in the task bar. - * - * Parameters : - * 1 : hInstance = application's instance handle - * - * Returns : Handle to newly created window. - * - *********************************************************************/ -HWND CreateHiddenLogOwnerWindow(HINSTANCE hInstance) -{ - static const char *szWndName = "PrivoxyLogOwner"; - WNDCLASS wc; - HWND hwnd; - - wc.style = 0; - wc.lpfnWndProc = LogOwnerWindowProc; - wc.cbClsExtra = 0; - wc.cbWndExtra = 0; - wc.hInstance = hInstance; - wc.hIcon = g_hiconApp; - wc.hCursor = 0; - wc.hbrBackground = 0; - wc.lpszMenuName = 0; - wc.lpszClassName = szWndName; - - RegisterClass(&wc); - - hwnd = CreateWindow(szWndName, szWndName, - WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, - CW_USEDEFAULT, NULL, NULL, hInstance, NULL ); - - return hwnd; - -} - - -/********************************************************************* - * - * Function : LogOwnerWindowProc - * - * Description : Dummy procedure that does nothing special. - * - * Parameters : - * 1 : hwnd = window handle - * 2 : uMsg = message number - * 3 : wParam = first param for this message - * 4 : lParam = next param for this message - * - * Returns : Same as `DefWindowProc'. - * - *********************************************************************/ -LRESULT CALLBACK LogOwnerWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) -{ - return DefWindowProc(hwnd, uMsg, wParam, lParam); - -} - - -/********************************************************************* - * - * Function : CreateLogWindow - * - * Description : Create the logging window. - * - * Parameters : - * 1 : hInstance = application's instance handle - * 2 : nCmdShow = window show value (MIN, MAX, NORMAL, etc...) - * - * Returns : Handle to newly created window. - * - *********************************************************************/ -HWND CreateLogWindow(HINSTANCE hInstance, int nCmdShow) -{ - static const char *szWndName = "PrivoxyLogWindow"; - static const char *szWndTitle = "Privoxy"; - - HWND hwnd = NULL; - HWND hwndOwner = (g_bShowOnTaskBar) ? NULL : CreateHiddenLogOwnerWindow(hInstance); - RECT rcClient; - WNDCLASSEX wc; - - memset(&wc, 0, sizeof(wc)); - wc.cbSize = sizeof(wc); - wc.style = CS_DBLCLKS; - wc.lpfnWndProc = LogWindowProc; - wc.cbClsExtra = 0; - wc.cbWndExtra = 0; - wc.hInstance = hInstance; - wc.hIcon = g_hiconApp; - wc.hCursor = 0; - wc.hbrBackground = 0; - wc.lpszMenuName = MAKEINTRESOURCE(IDR_LOGVIEW); - wc.lpszClassName = szWndName; - wc.hbrBackground = GetStockObject(WHITE_BRUSH); - RegisterClassEx(&wc); - - hwnd = CreateWindowEx(WS_EX_APPWINDOW, szWndName, szWndTitle, - WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, - CW_USEDEFAULT, hwndOwner, NULL, hInstance, NULL); - - /* Now create a child list box */ - GetClientRect(hwnd, &rcClient); - - /* Create a rich edit control */ - InitRichEdit(); - g_hwndLogBox = CreateWindowEx(0, (g_nRichEditVersion == 0x0100) ? "RichEdit" : RICHEDIT_CLASS, "", - ES_AUTOVSCROLL | ES_MULTILINE | ES_READONLY | ES_NOHIDESEL | WS_CHILD | WS_VSCROLL | WS_HSCROLL | WS_VISIBLE, - rcClient.left, rcClient.top, rcClient.right, rcClient.bottom, - hwnd, NULL, hInstance, NULL); -/* SendMessage(g_hwndLogBox, EM_SETWORDWRAPMODE, 0, 0); */ - - /* Subclass the control to catch certain messages */ - g_fnLogBox = (WNDPROC) GetWindowLong(g_hwndLogBox, GWL_WNDPROC); - SetWindowLong(g_hwndLogBox, GWL_WNDPROC, (LONG) LogRichEditProc); - - /* Minimizing looks stupid when the log window is not on the task bar, so hide instead */ - if (!g_bShowOnTaskBar && - (nCmdShow == SW_SHOWMINIMIZED || - nCmdShow == SW_MINIMIZE || - nCmdShow == SW_SHOWMINNOACTIVE)) - { - g_bShowLogWindow = FALSE; - nCmdShow = SW_HIDE; - } - - ShowWindow(hwnd, nCmdShow); - UpdateWindow(hwnd); - - - GetClientRect(g_hwndLogFrame, &rcClient); - SetWindowPos(g_hwndLogBox, NULL, rcClient.left, rcClient.top, rcClient.right - rcClient.left, rcClient.bottom - rcClient.top, SWP_NOZORDER); - - return hwnd; - -} - - -/********************************************************************* - * - * Function : InitRichEdit - * - * Description : Initialise the rich edit control library. - * - * Parameters : None - * - * Returns : TRUE => success, FALSE => failure. - * FIXME: this is backwards to the rest of IJB and to common - * programming practice. Please use 0 => success instead. - * - *********************************************************************/ -BOOL InitRichEdit(void) -{ - static HINSTANCE hInstRichEdit; - if (hInstRichEdit == NULL) - { - g_nRichEditVersion = 0; - hInstRichEdit = LoadLibraryA("RICHED20.DLL"); - if (hInstRichEdit) - { - g_nRichEditVersion = _RICHEDIT_VER; - } - else - { - hInstRichEdit = LoadLibraryA("RICHED32.DLL"); - if (hInstRichEdit) - { - g_nRichEditVersion = 0x0100; - } - } - } - return (hInstRichEdit != NULL) ? TRUE : FALSE; - -} - - -/********************************************************************* - * - * Function : ShowLogWindow - * - * Description : Shows or hides the log window. We will also raise the - * window on a show command in case it is buried. - * - * Parameters : - * 1 : bShow = TRUE to show, FALSE to mimize/hide - * - * Returns : N/A - * - *********************************************************************/ -void ShowLogWindow(BOOL bShow) -{ - if (bShow) - { - SetForegroundWindow(g_hwndLogFrame); - SetWindowPos(g_hwndLogFrame, HWND_TOP, 0, 0, 0, 0, SWP_SHOWWINDOW | SWP_NOSIZE | SWP_NOMOVE); - - } - else if (g_bShowOnTaskBar) - { - ShowWindow(g_hwndLogFrame, SW_MINIMIZE); - } - else - { - ShowWindow(g_hwndLogFrame, SW_HIDE); - } -} - - -/********************************************************************* - * - * Function : EditFile - * - * Description : Opens the specified setting file for editing. - * FIXME: What if the file has no associated application. Check for return values -* from ShellExecute?? - * - * Parameters : - * 1 : filename = filename from the config (aka config.txt) file. - * - * Returns : N/A - * - *********************************************************************/ -void EditFile(const char *filename) -{ - if (filename) - { - ShellExecute(g_hwndLogFrame, "open", filename, NULL, NULL, SW_SHOWNORMAL); - } - -} - - -/*--------------------------------------------------------------------------*/ -/* Windows message handlers */ -/*--------------------------------------------------------------------------*/ - - -/********************************************************************* - * - * Function : OnLogRButtonUp - * - * Description : Handler for WM_RBUTTONUP messages. - * - * Parameters : - * 1 : nModifier = wParam from mouse message (unused) - * 2 : x = x coordinate of the mouse event - * 3 : y = y coordinate of the mouse event - * - * Returns : N/A - * - *********************************************************************/ -void OnLogRButtonUp(int nModifier, int x, int y) -{ - HMENU hMenu = LoadMenu(g_hInstance, MAKEINTRESOURCE(IDR_POPUP_SELECTION)); - if (hMenu != NULL) - { - HMENU hMenuPopup = GetSubMenu(hMenu, 0); - - /* Check if there is a selection */ - CHARRANGE range; - SendMessage(g_hwndLogBox, EM_EXGETSEL, 0, (LPARAM) &range); - if (range.cpMin == range.cpMax) - { - EnableMenuItem(hMenuPopup, ID_EDIT_COPY, MF_BYCOMMAND | MF_GRAYED); - } - else - { - EnableMenuItem(hMenuPopup, ID_EDIT_COPY, MF_BYCOMMAND | MF_ENABLED); - } - - /* Display the popup */ - TrackPopupMenu(hMenuPopup, TPM_LEFTALIGN | TPM_TOPALIGN | TPM_RIGHTBUTTON, x, y, 0, g_hwndLogFrame, NULL); - DestroyMenu(hMenu); - } - -} - - -/********************************************************************* - * - * Function : OnLogCommand - * - * Description : Handler for WM_COMMAND messages. - * - * Parameters : - * 1 : nCommand = the command portion of the menu selection event - * - * Returns : N/A - * - *********************************************************************/ -void OnLogCommand(int nCommand) -{ - switch (nCommand) - { - case ID_TOGGLE_SHOWWINDOW: - g_bShowLogWindow = !g_bShowLogWindow; - - ShowLogWindow(g_bShowLogWindow); - break; - - case ID_FILE_EXIT: - PostMessage(g_hwndLogFrame, WM_CLOSE, 0, 0); - break; - - case ID_EDIT_COPY: - SendMessage(g_hwndLogBox, WM_COPY, 0, 0); - break; - - case ID_VIEW_CLEARLOG: - SendMessage(g_hwndLogBox, WM_SETTEXT, 0, (LPARAM) ""); - break; - - case ID_VIEW_LOGMESSAGES: - g_bLogMessages = !g_bLogMessages; - /* SaveLogSettings(); */ - break; - - case ID_VIEW_MESSAGEHIGHLIGHTING: - g_bHighlightMessages = !g_bHighlightMessages; - /* SaveLogSettings(); */ - break; - - case ID_VIEW_LIMITBUFFERSIZE: - g_bLimitBufferSize = !g_bLimitBufferSize; - /* SaveLogSettings(); */ - break; - - case ID_VIEW_ACTIVITYANIMATION: - g_bShowActivityAnimation = !g_bShowActivityAnimation; - /* SaveLogSettings(); */ - break; - -#ifdef FEATURE_TOGGLE - /* by haroon - change toggle to its opposite value */ - case ID_TOGGLE_ENABLED: - global_toggle_state = !global_toggle_state; - if (global_toggle_state) - { - log_error(LOG_LEVEL_INFO, "Now toggled ON."); - } - else - { - log_error(LOG_LEVEL_INFO, "Now toggled OFF."); - } - SetIdleIcon(); - break; -#endif /* def FEATURE_TOGGLE */ - - case ID_TOOLS_EDITCONFIG: - EditFile(configfile); - break; - - case ID_TOOLS_EDITDEFAULTACTIONS: - EditFile(g_default_actions_file); - break; - - case ID_TOOLS_EDITUSERACTIONS: - EditFile(g_user_actions_file); - break; - - case ID_TOOLS_EDITFILTERS: - EditFile(g_re_filterfile); - break; - -#ifdef FEATURE_TRUST - case ID_TOOLS_EDITTRUST: - EditFile(g_trustfile); - break; -#endif /* def FEATURE_TRUST */ - - case ID_HELP_GPL: - ShellExecute(g_hwndLogFrame, "open", "LICENSE.txt", NULL, NULL, SW_SHOWNORMAL); - break; - - case ID_HELP_FAQ: - ShellExecute(g_hwndLogFrame, "open", "doc\\faq\\index.html", NULL, NULL, SW_SHOWNORMAL); - break; - - case ID_HELP_MANUAL: - ShellExecute(g_hwndLogFrame, "open", "doc\\user-manual\\index.html", NULL, NULL, SW_SHOWNORMAL); - break; - - case ID_HELP_STATUS: - ShellExecute(g_hwndLogFrame, "open", CGI_PREFIX "show-status", NULL, NULL, SW_SHOWNORMAL); - break; - - case ID_HELP_ABOUT: - MessageBox(g_hwndLogFrame, win32_blurb, "About Privoxy", MB_OK); - break; - - default: - /* DO NOTHING */ - break; - } - -} - - -/********************************************************************* - * - * Function : OnLogInitMenu - * - * Description : Handler for WM_INITMENU messages. Enable, disable, - * check, and/or uncheck menu options as apropos. - * - * Parameters : - * 1 : hmenu = handle to menu to "make current" - * - * Returns : N/A - * - *********************************************************************/ -void OnLogInitMenu(HMENU hmenu) -{ - /* Only enable editors if there is a file to edit */ - EnableMenuItem(hmenu, ID_TOOLS_EDITDEFAULTACTIONS, MF_BYCOMMAND | (g_default_actions_file ? MF_ENABLED : MF_GRAYED)); - EnableMenuItem(hmenu, ID_TOOLS_EDITUSERACTIONS, MF_BYCOMMAND | (g_user_actions_file ? MF_ENABLED : MF_GRAYED)); - EnableMenuItem(hmenu, ID_TOOLS_EDITFILTERS, MF_BYCOMMAND | (g_re_filterfile ? MF_ENABLED : MF_GRAYED)); -#ifdef FEATURE_TRUST - EnableMenuItem(hmenu, ID_TOOLS_EDITTRUST, MF_BYCOMMAND | (g_trustfile ? MF_ENABLED : MF_GRAYED)); -#endif /* def FEATURE_TRUST */ - - /* Check/uncheck options */ - CheckMenuItem(hmenu, ID_VIEW_LOGMESSAGES, MF_BYCOMMAND | (g_bLogMessages ? MF_CHECKED : MF_UNCHECKED)); - CheckMenuItem(hmenu, ID_VIEW_MESSAGEHIGHLIGHTING, MF_BYCOMMAND | (g_bHighlightMessages ? MF_CHECKED : MF_UNCHECKED)); - CheckMenuItem(hmenu, ID_VIEW_LIMITBUFFERSIZE, MF_BYCOMMAND | (g_bLimitBufferSize ? MF_CHECKED : MF_UNCHECKED)); - CheckMenuItem(hmenu, ID_VIEW_ACTIVITYANIMATION, MF_BYCOMMAND | (g_bShowActivityAnimation ? MF_CHECKED : MF_UNCHECKED)); -#ifdef FEATURE_TOGGLE - /* by haroon - menu item for Enable toggle on/off */ - CheckMenuItem(hmenu, ID_TOGGLE_ENABLED, MF_BYCOMMAND | (global_toggle_state ? MF_CHECKED : MF_UNCHECKED)); -#endif /* def FEATURE_TOGGLE */ - CheckMenuItem(hmenu, ID_TOGGLE_SHOWWINDOW, MF_BYCOMMAND | (g_bShowLogWindow ? MF_CHECKED : MF_UNCHECKED)); - -} - - -/********************************************************************* - * - * Function : OnLogTimer - * - * Description : Handler for WM_TIMER messages. - * - * Parameters : - * 1 : nTimer = timer id (animation start/stop or clip buffer) - * - * Returns : N/A - * - *********************************************************************/ -void OnLogTimer(int nTimer) -{ - switch (nTimer) - { - case TIMER_ANIM_ID: - TraySetIcon(g_hwndTray, 1, g_hiconAnim[g_nAnimFrame++ % ANIM_FRAMES]); - break; - - case TIMER_ANIMSTOP_ID: - g_nAnimFrame = 0; - SetIdleIcon(); - KillTimer(g_hwndLogFrame, TIMER_ANIM_ID); - KillTimer(g_hwndLogFrame, TIMER_ANIMSTOP_ID); - break; - - case TIMER_CLIPBUFFER_ID: - case TIMER_CLIPBUFFER_FORCE_ID: - LogClipBuffer(); - g_bClipPending = FALSE; - KillTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_ID); - KillTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_FORCE_ID); - break; - - default: - /* DO NOTHING */ - break; - } - -} - - -/********************************************************************* - * - * Function : SetIdleIcon - * - * Description : Sets the tray icon to either idle or off - * - * Parameters : none - * - * Returns : N/A - * - *********************************************************************/ -void SetIdleIcon() -{ -#ifdef FEATURE_TOGGLE - if (!global_toggle_state) - { - TraySetIcon(g_hwndTray, 1, g_hiconOff); - /* log_error(LOG_LEVEL_INFO, "Privoxy OFF icon selected."); */ - } - else -#endif /* def FEATURE_TOGGLE */ - TraySetIcon(g_hwndTray, 1, g_hiconIdle); -} - - -/********************************************************************* - * - * Function : LogRichEditProc - * - * Description : Window subclass routine handles some events for the rich edit control. - * - * Parameters : - * 1 : hwnd = window handle of the rich edit control - * 2 : uMsg = message number - * 3 : wParam = first param for this message - * 4 : lParam = next param for this message - * - * Returns : Appropriate M$ window message handler codes. - * - *********************************************************************/ -LRESULT CALLBACK LogRichEditProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) -{ - switch (uMsg) - { - case WM_RBUTTONUP: - { - POINT pt; - pt.x = LOWORD(lParam); - pt.y = HIWORD(lParam); - ClientToScreen(hwnd, &pt); - OnLogRButtonUp(wParam, pt.x, pt.y); - return 0; - } - case WM_CHAR: - { - if ((GetKeyState(VK_CONTROL) != 0) && (wParam == 4)) /* ctrl+d */ - { - OnLogCommand(ID_VIEW_CLEARLOG); - return 0; - } - } - } - return CallWindowProc(g_fnLogBox, hwnd, uMsg, wParam, lParam); - -} - - -/********************************************************************* - * - * Function : LogWindowProc - * - * Description : Windows call back routine handles events on the log window. - * - * Parameters : - * 1 : hwnd = handle of the logging window - * 2 : uMsg = message number - * 3 : wParam = first param for this message - * 4 : lParam = next param for this message - * - * Returns : Appropriate M$ window message handler codes. - * - *********************************************************************/ -LRESULT CALLBACK LogWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) -{ - switch (uMsg) - { - case WM_CREATE: - return 0; - - case WM_CLOSE: - /* This is the end - beautiful friend - the end */ - DestroyWindow(g_hwndLogBox); - DestroyWindow(g_hwndLogFrame); - return 0; - - case WM_DESTROY: - PostQuitMessage(0); - return 0; - - case WM_SHOWWINDOW: - g_bShowLogWindow = wParam; - case WM_SIZE: - /* Resize the logging window to fit the new frame */ - if (g_hwndLogBox) - { - RECT rc; - GetClientRect(g_hwndLogFrame, &rc); - SetWindowPos(g_hwndLogBox, NULL, rc.left, rc.top, rc.right - rc.left, rc.bottom - rc.top, SWP_NOZORDER); - } - return 0; - - case WM_INITMENU: - OnLogInitMenu((HMENU) wParam); - return 0; - - case WM_TIMER: - OnLogTimer(wParam); - return 0; - - case WM_COMMAND: - OnLogCommand(LOWORD(wParam)); - return 0; - - case WM_SYSCOMMAND: - switch (wParam) - { - case SC_CLOSE: - if (g_bCloseHidesWindow) - { - ShowLogWindow(FALSE); - return 0; - } - break; - case SC_MINIMIZE: - ShowLogWindow(FALSE); - return 0; - } - break; - - case WM_CHAR: - if ((GetKeyState(VK_CONTROL) != 0) && (wParam == 4)) /* ctrl+d */ - { - OnLogCommand(ID_VIEW_CLEARLOG); - return 0; - } - break; - } - - return DefWindowProc(hwnd, uMsg, wParam, lParam); - -} - -#endif /* ndef _WIN_CONSOLE - entire file */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/w32log.h b/external/privoxy/w32log.h deleted file mode 100644 index fff13ad..0000000 --- a/external/privoxy/w32log.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef W32LOG_H_INCLUDED -#define W32LOG_H_INCLUDED -#define W32LOG_H_VERSION "$Id: w32log.h,v 1.13 2009/03/07 17:58:02 fabiankeil Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32log.h,v $ - * - * Purpose : Functions for creating and destroying the log window, - * ouputting strings, processing messages and so on. - * - * Copyright : Written by and Copyright (C) 2001-2009 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 1999 Adam Lock - * <locka(a)iol.ie> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32log.h,v $ - * Revision 1.13 2009/03/07 17:58:02 fabiankeil - * Fix two mingw32-only buffer overflows. Note that triggering - * them requires control over the configuration file in which - * case all bets are off anyway. - * - * Revision 1.12 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.10.2.2 2002/11/20 14:39:05 oes - * Fixed compiler warning - * - * Revision 1.10.2.1 2002/08/21 17:58:05 oes - * Temp kludge to let user and default action file be edited through win32 GUI (FR 592080) - * - * Revision 1.10 2002/03/26 22:57:10 jongfoster - * Web server name should begin www. - * - * Revision 1.9 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.8 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.7 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.6 2001/07/13 14:04:59 oes - * Removed all #ifdef PCRS - * - * Revision 1.5 2001/06/07 23:08:12 jongfoster - * Forward and ACL edit options removed. - * - * Revision 1.4 2001/05/31 21:37:11 jongfoster - * GUI changes to rename "permissions file" to "actions file". - * - * Revision 1.3 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.2 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.1.1.1 2001/05/15 13:59:07 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -extern HWND g_hwndLogFrame; - -/* Indicates whether task bar shows activity animation */ -extern BOOL g_bShowActivityAnimation; - -/* Indicates if the log window appears on the task bar */ -extern BOOL g_bShowOnTaskBar; - -/* Indicates whether closing the log window really just hides it */ -extern BOOL g_bCloseHidesWindow; - -/* Indicates if messages are logged at all */ -extern BOOL g_bLogMessages; - -/* Indicates whether log messages are highlighted */ -extern BOOL g_bHighlightMessages; - -/* Indicates if buffer is limited in size */ -extern BOOL g_bLimitBufferSize; - -/* Maximum number of lines allowed in buffer when limited */ -extern int g_nMaxBufferLines; - -/* Font to use */ -extern char g_szFontFaceName[32]; - -/* Size of font to use */ -extern int g_nFontSize; - - -/* FIXME: this is a kludge */ - -extern const char * g_default_actions_file; -extern const char * g_user_actions_file; -extern const char * g_re_filterfile; -#ifdef FEATURE_TRUST -extern const char * g_trustfile; -#endif /* def FEATURE_TRUST */ - -/* FIXME: end kludge */ - -extern HICON g_hiconApp; -extern int LogPutString(const char *pszText); -extern BOOL InitLogWindow(void); -extern void TermLogWindow(void); -extern void ShowLogWindow(BOOL bShow); -extern void LogShowActivity(void); - -/* Revision control strings from this header and associated .c file */ -extern const char w32log_rcs[]; -extern const char w32log_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef W32LOG_H_INCLUDED */ - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/w32res.h b/external/privoxy/w32res.h deleted file mode 100644 index ecee2c3..0000000 --- a/external/privoxy/w32res.h +++ /dev/null @@ -1,194 +0,0 @@ -#ifndef W32RES_H_INCLUDED -#define W32RES_H_INCLUDED -#define W32RES_H_VERSION "$Id: w32res.h,v 1.17 2009/01/01 15:09:23 ler762 Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32res.h,v $ - * - * Purpose : Identifiers for Windows GUI resources. - * - * Copyright : Written by and Copyright (C) 2001-2002 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Based on the Internet Junkbuster originally written - * by and Copyright (C) 1997 Anonymous Coders and - * Junkbusters Corporation. http://www.junkbusters.com - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32res.h,v $ - * Revision 1.17 2009/01/01 15:09:23 ler762 - * Change the Windows taskbar icon when privoxy is toggled off. - * - * Revision 1.16 2008/11/02 14:37:47 ler762 - * commit the part of the patches I've been using that were written by torford and gjmurphy - * [ 1824315 ] Minor code cleanup - * [ 1781135 ] Patch - Add clear log, select all, and Accelerators for w32 - * http://sourceforge.net/tracker/?func=detail&atid=311118&aid=1781135&group_i… - * The full patch adds control keys A(select all), C(copy) and D(delete all) to the - * Privoxy log window menu. Select all and copy work for me without the patch - * (albeit without showing the accelerator keys on the menu), so the only part of the - * patch I've been using for the last year or so has been the ctrl-d to delete - * everything in the Privoxy log window. - * - * Revision 1.15 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.13.2.1 2002/08/21 17:59:06 oes - * - "Show Privoxy Window" now a toggle - * - Temp kludge to let user and default action file be edited through win32 GUI (FR 592080) - * - * Revision 1.13 2002/03/26 22:57:10 jongfoster - * Web server name should begin www. - * - * Revision 1.12 2002/03/24 12:07:36 jongfoster - * Consistern name for filters file - * - * Revision 1.11 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.10 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.9 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.8 2001/07/13 14:04:59 oes - * Removed all #ifdef PCRS - * - * Revision 1.7 2001/06/07 23:08:12 jongfoster - * Forward and ACL edit options removed. - * - * Revision 1.6 2001/05/31 21:37:11 jongfoster - * GUI changes to rename "permissions file" to "actions file". - * - * Revision 1.5 2001/05/29 09:50:24 jongfoster - * Unified blocklist/imagelist/permissionslist. - * File format is still under discussion, but the internal changes - * are (mostly) done. - * - * Also modified interceptor behaviour: - * - We now intercept all URLs beginning with one of the following - * prefixes (and *only* these prefixes): - * * http://i.j.b/ - * * http://ijbswa.sf.net/config/ - * * http://ijbswa.sourceforge.net/config/ - * - New interceptors "home page" - go to http://i.j.b/ to see it. - * - Internal changes so that intercepted and fast redirect pages - * are not replaced with an image. - * - Interceptors now have the option to send a binary page direct - * to the client. (i.e. ijb-send-banner uses this) - * - Implemented show-url-info interceptor. (Which is why I needed - * the above interceptors changes - a typical URL is - * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif". - * The previous mechanism would not have intercepted that, and - * if it had been intercepted then it then it would have replaced - * it with an image.) - * - * Revision 1.4 2001/05/26 01:26:34 jongfoster - * New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor. - * This #define cannot be set from ./configure - there's no point, it - * doesn't work yet. See feature request # 425722 - * - * Revision 1.3 2001/05/26 00:28:36 jongfoster - * Automatic reloading of config file. - * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32). - * Most of the global variables have been moved to a new - * struct configuration_spec, accessed through csp->config->globalname - * Most of the globals remaining are used by the Win32 GUI. - * - * Revision 1.2 2001/05/20 01:21:20 jongfoster - * Version 2.9.4 checkin. - * - Merged popupfile and cookiefile, and added control over PCRS - * filtering, in new "permissionsfile". - * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration - * file error you now get a message box (in the Win32 GUI) rather - * than the program exiting with no explanation. - * - Made killpopup use the PCRS MIME-type checking and HTTP-header - * skipping. - * - Removed tabs from "config" - * - Moved duplicated url parsing code in "loaders.c" to a new funcition. - * - Bumped up version number. - * - * Revision 1.1.1.1 2001/05/15 13:59:08 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - -#define IDR_TRAYMENU 101 -#define IDI_IDLE 102 -#define IDR_LOGVIEW 103 -#define IDR_ACCELERATOR 104 -#define IDR_POPUP_SELECTION 105 - - -#define IDI_MAINICON 200 -#define IDI_ANIMATED1 201 -#define IDI_ANIMATED2 202 -#define IDI_ANIMATED3 203 -#define IDI_ANIMATED4 204 -#define IDI_ANIMATED5 205 -#define IDI_ANIMATED6 206 -#define IDI_ANIMATED7 207 -#define IDI_ANIMATED8 208 -#define IDI_OFF 209 - -#define ID_TOGGLE_SHOWWINDOW 4000 -#define ID_HELP_ABOUT 4001 -#define ID_FILE_EXIT 4002 -#define ID_VIEW_CLEARLOG 4003 -#define ID_VIEW_LOGMESSAGES 4004 -#define ID_VIEW_MESSAGEHIGHLIGHTING 4005 -#define ID_VIEW_LIMITBUFFERSIZE 4006 -#define ID_VIEW_ACTIVITYANIMATION 4007 -#define ID_HELP_FAQ 4008 -#define ID_HELP_MANUAL 4009 -#define ID_HELP_GPL 4010 -#define ID_HELP_STATUS 4011 -#ifdef FEATURE_TOGGLE -#define ID_TOGGLE_ENABLED 4012 -#endif /* def FEATURE_TOGGLE */ - -/* Break these out so they are easier to extend, but keep consecutive */ -#define ID_TOOLS_EDITCONFIG 5000 -#define ID_TOOLS_EDITDEFAULTACTIONS 5001 -#define ID_TOOLS_EDITUSERACTIONS 5002 -#define ID_TOOLS_EDITFILTERS 5003 - -#ifdef FEATURE_TRUST -#define ID_TOOLS_EDITTRUST 5004 -#endif /* def FEATURE_TRUST */ - -#define ID_EDIT_COPY 30000 - - -#endif /* ndef W32RES_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/w32svrapi.c b/external/privoxy/w32svrapi.c deleted file mode 100644 index aed1232..0000000 --- a/external/privoxy/w32svrapi.c +++ /dev/null @@ -1,952 +0,0 @@ -const char w32_svrapi_rcs[] = "$Id: w32svrapi.c,v 1.2 2006/09/20 03:15:43 david__schmidt Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32svrapi.c,v $ - * - * Purpose : Win32 Services API for Privoxy. - * Provides the implementation of an Win32 service to - * allow the code to directly register and run as a - * native Windows service application. - * - * Since Win9x/ME platforms don't provide or support - * running programs as services, this code uses runtime - * loading and calling of the Win32 Service API, to - * prevent the possibility of getting "entry point not - * found" type errors on unsupported platforms. This adds - * a little more complexity to the code, but it is worth - * doing to provide that isolation. - * - * Copyright : Written by and Copyright (C) 2003, 2006 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 2003 Ian Cummings - * <ian_a_c(a)hotmail.com> - * - * Special thanks to Mates Dolák <matesek(a)post.cz> for - * some very helpful feedback and suggestions during the - * development of this code. - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32svrapi.c,v $ - * Revision 1.2 2006/09/20 03:15:43 david__schmidt - * Clean up a variable type declaration which just - * happened to work... - * - * Revision 1.1 2006/08/12 03:54:37 david__schmidt - * Windows service integration - * - * - * - *********************************************************************/ - - -#include "config.h" - -#ifdef _WIN32 - -#include <stdio.h> - -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> -#include <process.h> - -#ifndef _WIN_CONSOLE -# include "w32log.h" -#endif /* ndef _WIN_CONSOLE */ - -#include "w32svrapi.h" -const char w32_svrapi_h_rcs[] = W32_SVRAPI_H_VERSION; - - -/* Only the ANSI Win32 APIs are used at this time. If for some - * reason, we're building under unicode then we must stop - */ -#ifdef UNICODE -#error "Privoxy interface to Win32 Services only runs under ANSI builds. Unicode is not supported at present, but you can volunteer for the job if you like! :)" -#endif - - -/* Default to not running as service, unless the command line says so */ -BOOL bRunAsService = FALSE; - -/* According to the Win32 docs for CreateService, - * the max length for the service name is 256 chars - */ -char szThisServiceName[260]; - -static BOOL get_service_description(const char *pszServiceName, char *pszDisplayName, DWORD dwDispSize); -static void WINAPI privoxy_w32_service_start(DWORD dw, LPSTR* psz); -static void WINAPI privoxy_w32_service_handler(DWORD dwOpcode); -SERVICE_TABLE_ENTRY w32ServiceDispatchTable[] = {{"", privoxy_w32_service_start}, {NULL, NULL}}; -static SERVICE_STATUS_HANDLE hSrv_status = 0; -static SERVICE_STATUS srv_status; - - - -/********************************************************************* - * This function returns TRUE if we are running on an OS that can - * support services, like NT, etc. It returns FALSE for Win9x/ME. - *********************************************************************/ -static BOOL HasServiceControlManager() -{ - HMODULE hDll; - FARPROC pFunc; - SC_HANDLE hScm; - - /* Load the DLL with the SCM functions or return a failure status */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - printf("Can't load Advapi32.dll -- LoadLibrary failed!\n"); - return FALSE; - } - - /* Get the address of the ANSI OpenSCManager function, or return a failure status */ - pFunc = GetProcAddress(hDll, "OpenSCManagerA"); - if (pFunc == NULL) - { - printf("Can't find OpenSCManagerA -- GetProcAddress failed!\n"); - FreeLibrary(hDll); - return FALSE; - } - - /* Try and connect to the SCM. If it fails check and see if the error - * code is ERROR_CALL_NOT_IMPLEMENTED, which means: - * "This function is not supported on this system." - */ - hScm = (SC_HANDLE)(*pFunc)(NULL, NULL, SC_MANAGER_CONNECT); - if (hScm == NULL) - { - DWORD dwErr = GetLastError(); - if (dwErr == ERROR_CALL_NOT_IMPLEMENTED) - { - /* Expected error under Win9x/Me, so don't print any debug info - * here as we'll leave that up to the calling function to do - */ - FreeLibrary(hDll); - return FALSE; - } - - printf("Call to OpenSCManager failed -- GetLastError() returned %lu!\n", dwErr); - FreeLibrary(hDll); - return FALSE; - } - - w32_close_service_handle(hScm); - - /* OpenSCManager function exists and works, so we're on an NT type platform */ - FreeLibrary(hDll); - - return TRUE; - -} /* -END- HasServiceControlManager */ - - -BOOL CanSystemSupportServices() -{ - BOOL bHasScm = HasServiceControlManager(); - return bHasScm; - -} /* -END- CanSystemSupportServices */ - - - -/********************************************************************* - * - * The Service functions are defined in <winsvc.h> which is where - * the declarations used in this file are taken from - * - *********************************************************************/ - - -/********************************************************************* - * Open a connection to the service control manager - *********************************************************************/ -SC_HANDLE w32_open_sc_manager( - LPCTSTR lpMachineName, /* computer name */ - LPCTSTR lpDatabaseName, /* SCM database name */ - DWORD dwDesiredAccess) /* access type */ -{ - HMODULE hDll = NULL; - SC_HANDLE hScm = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - - /* Load the DLL with the SCM functions or return failure */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return NULL; - } - - /* Get the address of the ANSI OpenSCManager function, or return failure */ - pFunc = GetProcAddress(hDll, "OpenSCManagerA"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return NULL; - } - - /* Call the SCM function, and save the error code */ - hScm = (SC_HANDLE)(*pFunc)(lpMachineName, lpDatabaseName, dwDesiredAccess); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return hScm; - -} /* -END- w32_open_sc_manager */ - - - -BOOL w32_close_service_handle( - SC_HANDLE hSCObject) /* handle to service or SCM object */ -{ - HMODULE hDll = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - BOOL bRet; - - /* Load the DLL with the SCM functions or return a failure status */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return FALSE; - } - - /* Get the address of the CloseServiceHandle function, or return a failure status */ - pFunc = GetProcAddress(hDll, "CloseServiceHandle"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return FALSE; - } - - /* Close the handle, and save the error code */ - bRet = (BOOL)(*pFunc)(hSCObject); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return bRet; - -} /* -END- w32_close_service_handle */ - - - -/********************************************************************* - * Open a service - *********************************************************************/ -SC_HANDLE w32_open_service( - SC_HANDLE hSCManager, /* handle to SCM database */ - LPCTSTR lpServiceName, /* service name */ - DWORD dwDesiredAccess) /* access */ -{ - HMODULE hDll = NULL; - SC_HANDLE hSrv = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - - /* Load the DLL with the SCM functions or return failure */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return NULL; - } - - /* Get the address of the ANSI OpenService function, or return failure */ - pFunc = GetProcAddress(hDll, "OpenServiceA"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return NULL; - } - - /* Call the SCM function, and save the error code */ - hSrv = (SC_HANDLE)(*pFunc)(hSCManager, lpServiceName, dwDesiredAccess); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return hSrv; - -} /* -END- w32_open_service */ - - - -SC_HANDLE w32_create_service( - SC_HANDLE hSCManager, /* handle to SCM database */ - LPCTSTR lpServiceName, /* name of service to start */ - LPCTSTR lpDisplayName, /* display name */ - DWORD dwDesiredAccess, /* type of access to service */ - DWORD dwServiceType, /* type of service */ - DWORD dwStartType, /* when to start service */ - DWORD dwErrorControl, /* severity of service failure */ - LPCTSTR lpBinaryPathName, /* name of binary file */ - LPCTSTR lpLoadOrderGroup, /* name of load ordering group */ - LPDWORD lpdwTagId, /* tag identifier */ - LPCTSTR lpDependencies, /* array of dependency names */ - LPCTSTR lpServiceStartName, /* account name */ - LPCTSTR lpPassword) /* account password */ -{ - HMODULE hDll = NULL; - SC_HANDLE hSrv = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - - /* Load the DLL with the SCM functions or return failure */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return NULL; - } - - /* Get the address of the ANSI CreateService function, or return failure */ - pFunc = GetProcAddress(hDll, "CreateServiceA"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return NULL; - } - - /* Call the SCM function, and save the error code */ - hSrv = (SC_HANDLE)(*pFunc)(hSCManager, /* handle to SCM database */ - lpServiceName, /* name of service to start */ - lpDisplayName, /* display name */ - dwDesiredAccess, /* type of access to service */ - dwServiceType, /* type of service */ - dwStartType, /* when to start service */ - dwErrorControl, /* severity of service failure */ - lpBinaryPathName, /* name of binary file */ - lpLoadOrderGroup, /* name of load ordering group */ - lpdwTagId, /* tag identifier */ - lpDependencies, /* array of dependency names */ - lpServiceStartName, /* account name */ - lpPassword); /* account password */ - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return hSrv; - -} /* -END- w32_create_service */ - - - -BOOL w32_delete_service( - SC_HANDLE hService) /* handle to service */ -{ - HMODULE hDll = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - BOOL bRet; - - /* Load the DLL with the SCM functions or return a failure status */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return FALSE; - } - - /* Get the address of the DeleteService function, or return a failure status */ - pFunc = GetProcAddress(hDll, "DeleteService"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return FALSE; - } - - /* Close the handle, and save the error code */ - bRet = (BOOL)(*pFunc)(hService); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return bRet; - -} /* -END- w32_delete_service */ - - - -BOOL w32_query_service_config( - SC_HANDLE hService, /* handle to service */ - LPQUERY_SERVICE_CONFIG lpServiceConfig, /* buffer */ - DWORD cbBufSize, /* size of buffer */ - LPDWORD pcbBytesNeeded) /* bytes needed */ -{ - HMODULE hDll = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - BOOL bRet; - - /* Load the DLL with the SCM functions or return a failure status */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return FALSE; - } - - /* Get the address of the QueryServiceConfig function, or return a failure status */ - pFunc = GetProcAddress(hDll, "QueryServiceConfigA"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return FALSE; - } - - /* Close the handle, and save the error code */ - bRet = (BOOL)(*pFunc)(hService, lpServiceConfig, cbBufSize, pcbBytesNeeded); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return bRet; - -} /* -END- w32_query_service_config */ - - -BOOL w32_start_service_ctrl_dispatcher( - CONST LPSERVICE_TABLE_ENTRY lpServiceTable) /* service table */ -{ - HMODULE hDll = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - BOOL bRet; - - /* Load the DLL with the SCM functions or return a failure status */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return FALSE; - } - - /* Get the address of the StartServiceCtrlDispatcher function, or return a failure status */ - pFunc = GetProcAddress(hDll, "StartServiceCtrlDispatcherA"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return FALSE; - } - - /* Close the handle, and save the error code */ - bRet = (BOOL)(*pFunc)(lpServiceTable); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return bRet; - -} /* -END- w32_start_service_ctrl_dispatcher */ - - - -SERVICE_STATUS_HANDLE w32_register_service_ctrl_handler( - LPCTSTR lpServiceName, /* service name */ - LPHANDLER_FUNCTION lpHandlerProc) /* handler function */ -{ - HMODULE hDll = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - SERVICE_STATUS_HANDLE hServStat = (SERVICE_STATUS_HANDLE)0; - - /* Load the DLL with the SCM functions or return a failure status */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return hServStat; - } - - /* Get the address of the RegisterServiceCtrlHandler function, or return a failure status */ - pFunc = GetProcAddress(hDll, "RegisterServiceCtrlHandlerA"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return hServStat; - } - - /* Close the handle, and save the error code */ - hServStat = (SERVICE_STATUS_HANDLE)(*pFunc)(lpServiceName, lpHandlerProc); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return hServStat; - -} /* -END- w32_register_service_ctrl_handler */ - - - -BOOL w32_set_service_status( - SERVICE_STATUS_HANDLE hServiceStatus, /* service status handle */ - LPSERVICE_STATUS lpServiceStatus) /* status buffer */ -{ - HMODULE hDll = NULL; - FARPROC pFunc = NULL; - DWORD dwLastErr = 0; - BOOL bRet; - - /* Load the DLL with the SCM functions or return a failure status */ - hDll = LoadLibrary("Advapi32.dll"); - if (hDll == NULL) - { - return FALSE; - } - - /* Get the address of the SetServiceStatus function, or return a failure status */ - pFunc = GetProcAddress(hDll, "SetServiceStatus"); - if (pFunc == NULL) - { - FreeLibrary(hDll); - return FALSE; - } - - /* Close the handle, and save the error code */ - bRet = (BOOL)(*pFunc)(hServiceStatus, lpServiceStatus); - dwLastErr = GetLastError(); - - /* Release the library and then restore the last error - * code, in case FreeLibrary altered it. - */ - FreeLibrary(hDll); - SetLastError(dwLastErr); - - return bRet; - -} /* -END- w32_set_service_status */ - - -static void display_win32_msg(BOOL bIsError, char *msg) -{ -#ifdef _WIN_CONSOLE - printf("%s", msg); -#else - if (bIsError) - { - MessageBox(NULL, msg, "Privoxy Error", - MB_OK | MB_ICONERROR | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST); - } - else - { - MessageBox(NULL, msg, "Privoxy Information", - MB_OK | MB_ICONINFORMATION | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST); - } -#endif - -} /* -END- display_win32_msg */ - - -static BOOL get_service_description(const char *pszServiceName, char *pszDisplayName, DWORD dwDispSize) -{ - /********************************************************************* - * Create a simple display name - *********************************************************************/ - strcpy(pszDisplayName, "Privoxy ("); - strncat(pszDisplayName, pszServiceName, dwDispSize - strlen(pszDisplayName) - 2); - strcat(pszDisplayName, ")"); - - return TRUE; -} - - - -BOOL install_service(const char *service_name) -{ - char szModule[(MAX_PATH*2)+1]; - char szDisplayName[MAX_PATH+2]; - SC_HANDLE hSCM; - SC_HANDLE hService; - - /********************************************************************* - * First check if this system can support a service architecture - *********************************************************************/ - if (!CanSystemSupportServices()) - { - display_win32_msg(TRUE, "This system doesn't support installing Privoxy as a service.\nWinNT/2000/XP are required for this feature.\n"); - return FALSE; - } - - /* Use a default service name if none was supplied */ - if ((service_name == NULL) || (strlen(service_name) == 0)) - { - service_name = "privoxy"; - } - - /********************************************************************* - * Open a handle to the Service Control Manager with full access rights - *********************************************************************/ - hSCM = w32_open_sc_manager(NULL, NULL, SC_MANAGER_ALL_ACCESS); - if (hSCM == NULL) - { - display_win32_msg(TRUE, "Can't open Service Control Manager - Service install failed!\n Administrator rights are required to create a service.\n"); - return FALSE; - } - - - /********************************************************************* - * Work out the full image path plus command line for the service - * We'll temporarily use szDisplayName as a second buffer. - *********************************************************************/ - GetModuleFileName(NULL, szDisplayName, MAX_PATH); - sprintf(szModule, "\"%s\" --service", szDisplayName); - - - /********************************************************************* - * Get the display name for the service - *********************************************************************/ - get_service_description(service_name, szDisplayName, sizeof(szDisplayName)/sizeof(char)); - - - /********************************************************************* - * Create the service - *********************************************************************/ - hService = w32_create_service(hSCM, - service_name, /* the internal service name */ - szDisplayName, /* the display name */ - SERVICE_ALL_ACCESS, /* get full access during creation */ - SERVICE_WIN32_OWN_PROCESS /* run in our own process */ -#ifndef _WIN_CONSOLE - + SERVICE_INTERACTIVE_PROCESS /* GUI also wants interactive rights */ -#endif - , - SERVICE_DEMAND_START, /* For now, only start when asked to */ - SERVICE_ERROR_NORMAL, /* Normal error handling by the SCM */ - szModule, /* The executable service file */ - NULL, /* No load order info needed */ - NULL, /* No load order info needed */ - NULL, /* No dependencies */ - NULL, /* Default to LocalSystem... */ - NULL); /* ...which doesn't require a password */ - if (hService == NULL) - { - display_win32_msg(TRUE, "Can't install service!\n"); - w32_close_service_handle(hSCM); - return FALSE; - } - - display_win32_msg(FALSE, "Service was successfully created.\n*** IMPORTANT NOTE: You should now use the Services control panel to\n*** configure the startup type and user account details for the service.\n\n"); - - /* tidy up */ - w32_close_service_handle(hService); - w32_close_service_handle(hSCM); - return TRUE; - -} /* -END- install_service */ - - - -BOOL uninstall_service(const char *service_name) -{ - char szDisplayName[MAX_PATH+2]; - SC_HANDLE hSCM; - SC_HANDLE hService; - BOOL bResult = FALSE; - - - /********************************************************************* - * First check if this system can support a service architecture - *********************************************************************/ - if (!CanSystemSupportServices()) - { - display_win32_msg(TRUE, "This system doesn't support installing Privoxy as a service.\nWinNT/2000/XP are required for this feature.\n"); - return FALSE; - } - - - /* Use a default service name if none was supplied */ - if ((service_name == NULL) || (strlen(service_name) == 0)) - { - service_name = "privoxy"; - } - - - /********************************************************************* - * Open a handle to the Service Control Manager with full access rights - *********************************************************************/ - hSCM = w32_open_sc_manager(NULL, NULL, SC_MANAGER_ALL_ACCESS); - if (hSCM == NULL) - { - display_win32_msg(TRUE, "Can't open Service Control Manager - Service uninstall failed!\n Administrator rights are required to delete a service.\n"); - return FALSE; - } - - - /********************************************************************* - * Get the display name for the service - *********************************************************************/ - get_service_description(service_name, szDisplayName, sizeof(szDisplayName)/sizeof(char)); - - - /********************************************************************* - * Open and then delete the service - *********************************************************************/ - hService = w32_open_service(hSCM, service_name, DELETE); - if (hService == NULL) - { - display_win32_msg(TRUE, "Can't open service for delete access rights!\n"); - w32_close_service_handle(hSCM); - return FALSE; - } - - if (w32_delete_service(hService)) - { - display_win32_msg(FALSE, "Service was deleted successfully.\n"); - bResult = TRUE; - } - else - { - display_win32_msg(TRUE, "Service could not be deleted!\n"); - bResult = FALSE; - } - - w32_close_service_handle(hService); - w32_close_service_handle(hSCM); - return bResult; - -} /* -END- uninstall_service */ - - - -/********************************************************************* - * - * Function : privoxy_w32_service_start - * - * Description : This is the entry point function for the service. - * In other words, it's the ServiceMain function. - * - * Parameters : Defined by the Win32 API, but not used here - * - * Returns : void - * - *********************************************************************/ -static void WINAPI privoxy_w32_service_start(DWORD dw, LPSTR* pszArgs) -{ - int child_id; - - /* Arg zero is always the service name, and we need to - * know it when we call RegisterServiceCtrlHandler. - */ - strcpy(szThisServiceName, pszArgs[0]); - - /* Tell the SCM we are running */ - srv_status.dwServiceType = SERVICE_WIN32_OWN_PROCESS; - srv_status.dwCurrentState = SERVICE_RUNNING; - srv_status.dwCheckPoint = 0; - srv_status.dwControlsAccepted = SERVICE_ACCEPT_STOP; - srv_status.dwWin32ExitCode = NO_ERROR; - srv_status.dwServiceSpecificExitCode = 0; - srv_status.dwWaitHint = 0; - - hSrv_status = w32_register_service_ctrl_handler(szThisServiceName, privoxy_w32_service_handler); - if (!hSrv_status) - { - return; - } - w32_set_service_status(hSrv_status, &srv_status); - -#ifndef FEATURE_PTHREAD - child_id = _beginthread(w32_service_listen_loop, 0, NULL); - if (child_id > 0) -#else -#error "FIXME: Do pthread stuff here!" -#endif - { - w32_set_service_status(hSrv_status, &srv_status); - } - else - { - srv_status.dwCurrentState = SERVICE_STOPPED; - srv_status.dwCheckPoint = 0; - srv_status.dwWin32ExitCode = ERROR_SERVICE_SPECIFIC_ERROR; - srv_status.dwServiceSpecificExitCode = ERROR_SERVICE_NO_THREAD; - w32_set_service_status(hSrv_status, &srv_status); - } -} - - -/********************************************************************* - * - * Function : w32_set_service_cwd - * - * Description : Simple function to change the current directory to - * the same location as the service executable. - * - * Parameters : void - * - * Returns : void - * - *********************************************************************/ -void w32_set_service_cwd(void) -{ - char exe_name[MAX_PATH+1]; - char dir_name[MAX_PATH+1]; - char *pszFile = NULL; - - /* Get the exe name and path of the service */ - if (GetModuleFileName(NULL, exe_name, MAX_PATH)) - { - /* Ask the API to tell us where the filename portion starts */ - if (GetFullPathName(exe_name, MAX_PATH, dir_name, &pszFile)) - { - /* remove the filename from the string */ - if (pszFile != NULL) - { - *pszFile = '\0'; - /* We have just a directory path now, so make it current */ - SetCurrentDirectory(dir_name); - } - } - } -} - - -/********************************************************************* - * - * Function : w32_service_exit_notify - * - * Description : This is a simple atexit function that is called by the - * C runtime after exit has been called. It allows the - * service code to detect when the app is about to die and - * send an quick notification to the SCM that the service - * now stopped. - * - * Parameters : void - * - * Returns : void - * - *********************************************************************/ -void w32_service_exit_notify(void) -{ - if (hSrv_status != 0) - { - if (srv_status.dwCurrentState != SERVICE_STOPPED) - { - srv_status.dwCurrentState = SERVICE_STOPPED; - srv_status.dwCheckPoint = 0; - srv_status.dwWin32ExitCode = ERROR_SERVICE_SPECIFIC_ERROR; - srv_status.dwServiceSpecificExitCode = ERROR_PROCESS_ABORTED; - w32_set_service_status(hSrv_status, &srv_status); - } - } -} - - -static void w32_mini_exit(void *p) -{ - Sleep(100); -#ifdef _WIN_CONSOLE - exit(0); -#else - PostMessage(g_hwndLogFrame, WM_CLOSE, 0, 0); -#endif /* def _WIN_CONSOLE */ -} - - -/********************************************************************* - * - * Function : privoxy_w32_service_handler - * - * Description : This is the control message handler function for - * the service. - * - * Parameters : dwOpcode - * requested control code sent by SCM - * - * Returns : void - * - *********************************************************************/ -static void WINAPI privoxy_w32_service_handler(DWORD dwOpcode) -{ - switch(dwOpcode) - { - case SERVICE_CONTROL_STOP: - /* We've stopped - */ - srv_status.dwCurrentState = SERVICE_STOPPED; - srv_status.dwCheckPoint = 0; - srv_status.dwWin32ExitCode = NO_ERROR; - srv_status.dwServiceSpecificExitCode = 0; - - /* Maybe there is a more friendly way to stop, but this will do for now! */ - w32_set_service_status(hSrv_status, &srv_status); - - /* During testing, I kept getting error 109 (ERROR_BROKEN_PIPE) and - * as far as the SCM was concerned the service was still stopping, - * even after the process had disappeared. - * - * It seems that if we call exit in the ServiceMain thread, it causes - * the SCM to not recieve the status we sent in the line above. The - * simple fix was to create a new thread to actually call exit for us - * whilst this thread continues and returns to its caller. - */ - - if (_beginthread(w32_mini_exit, 0, NULL) < 0) - { - /* we failed to create the exit thread, so just force an exit here - * and the SCM will just have to go and whistle! - */ - exit(0); - } - break; - - default: - break; - } - - w32_set_service_status(hSrv_status, &srv_status); -} - - -#endif /* ifdef _WIN32 */ - diff --git a/external/privoxy/w32svrapi.h b/external/privoxy/w32svrapi.h deleted file mode 100644 index 48a6d8d..0000000 --- a/external/privoxy/w32svrapi.h +++ /dev/null @@ -1,146 +0,0 @@ -#ifndef W32_SVRAPI_H_INCLUDED -#define W32_SVRAPI_H_INCLUDED -#define W32_SVRAPI_H_VERSION "$Id: w32svrapi.h,v 1.1 2006/08/12 03:54:37 david__schmidt Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32svrapi.h,v $ - * - * Purpose : Win32 Services API for Privoxy. - * Provides the implementation of an Win32 service to - * allow the code to directly register and run as a - * native Windows service application. - * - * Since Win9x/ME platforms don't provide or support - * running programs as services, this code uses runtime - * loading and calling of the Win32 Service API, to - * prevent the possibility of getting "entry point not - * found" type errors on unsupported platforms. This adds - * a little more complexity to the code, but it is worth - * doing to provide that isolation. - * - * Copyright : Written by and Copyright (C) 2003 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 2003 Ian Cummings - * <ian_a_c(a)hotmail.com> - * - * Special thanks to Mates Dolák <matesek(a)post.cz> for - * some very helpful feedback and suggestions during the - * development of this code. - * - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32svrapi.h,v $ - * Revision 1.1 2006/08/12 03:54:37 david__schmidt - * Windows service integration - * - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef _WIN32 - - -extern char szThisServiceName[]; -extern BOOL bRunAsService; -extern SERVICE_TABLE_ENTRY w32ServiceDispatchTable[]; - -extern BOOL install_service(const char *service_name); -extern BOOL uninstall_service(const char *service_name); -extern void w32_service_exit_notify(void); -extern void w32_set_service_cwd(void); -extern void w32_service_listen_loop(void *p); - - -extern BOOL CanSystemSupportServices(); - - -extern SC_HANDLE w32_open_sc_manager( - LPCTSTR lpMachineName, /* computer name */ - LPCTSTR lpDatabaseName, /* SCM database name */ - DWORD dwDesiredAccess); /* access type */ - - -extern BOOL w32_close_service_handle( - SC_HANDLE hSCObject); /* handle to service or SCM object */ - - -extern SC_HANDLE w32_open_service( - SC_HANDLE hSCManager, /* handle to SCM database */ - LPCTSTR lpServiceName, /* service name */ - DWORD dwDesiredAccess); /* access */ - - -extern SC_HANDLE w32_create_service( - SC_HANDLE hSCManager, /* handle to SCM database */ - LPCTSTR lpServiceName, /* name of service to start */ - LPCTSTR lpDisplayName, /* display name */ - DWORD dwDesiredAccess, /* type of access to service */ - DWORD dwServiceType, /* type of service */ - DWORD dwStartType, /* when to start service */ - DWORD dwErrorControl, /* severity of service failure */ - LPCTSTR lpBinaryPathName, /* name of binary file */ - LPCTSTR lpLoadOrderGroup, /* name of load ordering group */ - LPDWORD lpdwTagId, /* tag identifier */ - LPCTSTR lpDependencies, /* array of dependency names */ - LPCTSTR lpServiceStartName, /* account name */ - LPCTSTR lpPassword); /* account password */ - - -extern BOOL w32_delete_service( - SC_HANDLE hService); /* handle to service */ - - -extern BOOL w32_query_service_config( - SC_HANDLE hService, /* handle to service */ - LPQUERY_SERVICE_CONFIG lpServiceConfig, /* buffer */ - DWORD cbBufSize, /* size of buffer */ - LPDWORD pcbBytesNeeded); /* bytes needed */ - - -extern BOOL w32_start_service_ctrl_dispatcher( - CONST LPSERVICE_TABLE_ENTRY lpServiceTable); /* service table */ - - -extern SERVICE_STATUS_HANDLE w32_register_service_ctrl_handler( - LPCTSTR lpServiceName, /* service name */ - LPHANDLER_FUNCTION lpHandlerProc); /* handler function */ - - -extern BOOL w32_set_service_status( - SERVICE_STATUS_HANDLE hServiceStatus, /* service status handle */ - LPSERVICE_STATUS lpServiceStatus); /* status buffer */ - - -#endif /* def _WIN32 */ - - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef W32_SVRAPI_H_INCLUDED */ - diff --git a/external/privoxy/w32taskbar.c b/external/privoxy/w32taskbar.c deleted file mode 100644 index 079e45e..0000000 --- a/external/privoxy/w32taskbar.c +++ /dev/null @@ -1,313 +0,0 @@ -const char w32taskbar_rcs[] = "$Id: w32taskbar.c,v 1.10 2006/09/23 13:26:38 roro Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32taskbar.c,v $ - * - * Purpose : Functions for creating, setting and destroying the - * workspace tray icon - * - * Copyright : Written by and Copyright (C) 2001-2002 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 1999 Adam Lock - * <locka(a)iol.ie> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32taskbar.c,v $ - * Revision 1.10 2006/09/23 13:26:38 roro - * Replace TABs by spaces in source code. - * - * Revision 1.9 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.7.2.2 2003/03/19 21:27:42 gliptak - * Corrected compilation error/typo - * - * Revision 1.7.2.1 2002/11/20 14:39:32 oes - * Applied patch by Mattes Dolak which adds re-creation of the win32 taskbar - * icon on reception of the "TaskbarCreated" window message. - * - * Revision 1.7 2002/03/31 17:19:00 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.6 2002/03/26 22:57:10 jongfoster - * Web server name should begin www. - * - * Revision 1.5 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.4 2001/11/16 00:46:31 jongfoster - * Fixing compiler warnings - * - * Revision 1.3 2001/05/22 18:56:28 oes - * CRLF -> LF - * - * Revision 1.2 2001/05/20 15:07:54 jongfoster - * File is now ignored if _WIN_CONSOLE is defined. - * - * Revision 1.1.1.1 2001/05/15 13:59:08 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#include <stdio.h> - -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> - -#include "w32taskbar.h" -#include "w32res.h" -#include "w32log.h" - -const char w32taskbar_h_rcs[] = W32TASKBAR_H_VERSION; - -#ifndef _WIN_CONSOLE /* entire file */ - -#define WM_TRAYMSG WM_USER+1 - -static HMENU g_hmenuTray; -static HWND g_hwndTrayX; -static UINT g_traycreatedmsg; - -static LRESULT CALLBACK TrayProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam); - - -/********************************************************************* - * - * Function : CreateTrayWindow - * - * Description : Creates and returns the invisible window responsible - * for processing tray messages. - * - * Parameters : - * 1 : hInstance = instance handle of this application - * - * Returns : Handle of the systray window. - * - *********************************************************************/ -HWND CreateTrayWindow(HINSTANCE hInstance) -{ - WNDCLASS wc; - static const char *szWndName = "PrivoxyTrayWindow"; - - wc.style = 0; - wc.lpfnWndProc = TrayProc; - wc.cbClsExtra = 0; - wc.cbWndExtra = 0; - wc.hInstance = hInstance; - wc.hIcon = 0; - wc.hCursor = 0; - wc.hbrBackground = 0; - wc.lpszMenuName = 0; - wc.lpszClassName = szWndName; - - RegisterClass(&wc); - - /* TaskbarCreated is sent to a window when it should re-add its tray icons */ - g_traycreatedmsg = RegisterWindowMessage("TaskbarCreated"); - - g_hwndTrayX = CreateWindow(szWndName, szWndName, - WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, - CW_USEDEFAULT, NULL, NULL, hInstance, NULL ); - - ShowWindow(g_hwndTrayX, SW_HIDE); - UpdateWindow(g_hwndTrayX); - - g_hmenuTray = LoadMenu(hInstance, MAKEINTRESOURCE(IDR_TRAYMENU)); - - return g_hwndTrayX; - -} - - -/********************************************************************* - * - * Function : TraySetIcon - * - * Description : Sets the tray icon to the specified shape. - * - * Parameters : - * 1 : hwnd = handle of the systray window - * 2 : uID = user message number to notify systray window - * 3 : hicon = set the current icon to this handle - * - * Returns : Same value as `Shell_NotifyIcon'. - * - *********************************************************************/ -BOOL TraySetIcon(HWND hwnd, UINT uID, HICON hicon) -{ - NOTIFYICONDATA nid; - - memset(&nid, 0, sizeof(nid)); - - nid.cbSize = sizeof(nid); - nid.hWnd = hwnd; - nid.uID = uID; - nid.uFlags = NIF_ICON; - nid.uCallbackMessage = 0; - nid.hIcon = hicon; - - return( Shell_NotifyIcon(NIM_MODIFY, &nid) ); - -} - - -/********************************************************************* - * - * Function : TrayAddIcon - * - * Description : Adds a tray icon. - * - * Parameters : - * 1 : hwnd = handle of the systray window - * 2 : uID = user message number to notify systray window - * 3 : hicon = handle of icon to add to systray window - * 4 : pszToolTip = tool tip when mouse hovers over systray window - * - * Returns : Same as `Shell_NotifyIcon'. - * - *********************************************************************/ -BOOL TrayAddIcon(HWND hwnd, UINT uID, HICON hicon, const char *pszToolTip) -{ - NOTIFYICONDATA nid; - - memset(&nid, 0, sizeof(nid)); - - nid.cbSize = sizeof(nid); - nid.hWnd = hwnd; - nid.uID = uID; - nid.uFlags = NIF_MESSAGE | NIF_ICON | NIF_TIP; - nid.uCallbackMessage = WM_TRAYMSG; - nid.hIcon = hicon; - - if (pszToolTip) - { - strcpy(nid.szTip, pszToolTip); - } - - return( Shell_NotifyIcon(NIM_ADD, &nid) ); - -} - - -/********************************************************************* - * - * Function : TrayDeleteIcon - * - * Description : Deletes a tray icon. - * - * Parameters : - * 1 : hwnd = handle of the systray window - * 2 : uID = user message number to notify systray window - * - * Returns : Same as `Shell_NotifyIcon'. - * - *********************************************************************/ -BOOL TrayDeleteIcon(HWND hwnd, UINT uID) -{ - NOTIFYICONDATA nid; - - memset(&nid, 0, sizeof(nid)); - - nid.cbSize = sizeof(nid); - nid.hWnd = hwnd; - nid.uID = uID; - - return( Shell_NotifyIcon(NIM_DELETE, &nid) ); - -} - - -/********************************************************************* - * - * Function : TrayProc - * - * Description : Call back procedure processes tray messages. - * - * Parameters : - * 1 : hwnd = handle of the systray window - * 2 : msg = message number - * 3 : wParam = first param for this message - * 4 : lParam = next param for this message - * - * Returns : Appropriate M$ window message handler codes. - * - *********************************************************************/ -LRESULT CALLBACK TrayProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) -{ - switch (msg) - { - case WM_CREATE: - return 0; - - case WM_CLOSE: - PostQuitMessage(0); - return 0; - - case WM_TRAYMSG: - { - /* UINT uID = (UINT) wParam; */ - UINT uMouseMsg = (UINT) lParam; - - if (uMouseMsg == WM_RBUTTONDOWN) - { - POINT pt; - HMENU hmenu = GetSubMenu(g_hmenuTray,0); - GetCursorPos(&pt); - SetForegroundWindow(g_hwndLogFrame); - TrackPopupMenu(hmenu, TPM_LEFTALIGN | TPM_TOPALIGN, pt.x, pt.y, 0, g_hwndLogFrame, NULL); - PostMessage(g_hwndLogFrame, WM_NULL, 0, 0 ) ; - } - else if (uMouseMsg == WM_LBUTTONDBLCLK) - { - ShowLogWindow(TRUE); - } - } - return 0; - - default: - - if (msg == g_traycreatedmsg) - { - TrayAddIcon(g_hwndTrayX, 1, g_hiconApp, "Privoxy"); - } - break; - } - - return DefWindowProc(hwnd, msg, wParam, lParam); - -} - - -#endif /* ndef _WIN_CONSOLE - entire file */ - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/w32taskbar.h b/external/privoxy/w32taskbar.h deleted file mode 100644 index 7ea7588..0000000 --- a/external/privoxy/w32taskbar.h +++ /dev/null @@ -1,82 +0,0 @@ -#ifndef W32TASKBAR_H_INCLUDED -#define W32TASKBAR_H_INCLUDED -#define W32TASKBAR_H_VERSION "$Id: w32taskbar.h,v 1.6 2006/07/18 14:48:48 david__schmidt Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/w32taskbar.h,v $ - * - * Purpose : Functions for creating, setting and destroying the - * workspace tray icon - * - * Copyright : Written by and Copyright (C) 2001-2002 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 1999 Adam Lock - * <locka(a)iol.ie> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: w32taskbar.h,v $ - * Revision 1.6 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.4 2002/03/26 22:57:10 jongfoster - * Web server name should begin www. - * - * Revision 1.3 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.2 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.1.1.1 2001/05/15 13:59:08 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -extern HWND CreateTrayWindow(HINSTANCE hInstance); -extern BOOL TrayAddIcon(HWND hwnd, UINT uID, HICON hicon, const char *pszToolTip); -extern BOOL TraySetIcon(HWND hwnd, UINT uID, HICON hicon); -extern BOOL TrayDeleteIcon(HWND hwnd, UINT uID); - -/* Revision control strings from this header and associated .c file */ -extern const char w32taskbar_rcs[]; -extern const char w32taskbar_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef W32TASKBAR_H_INCLUDED */ - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/win32.c b/external/privoxy/win32.c deleted file mode 100644 index 3aedd53..0000000 --- a/external/privoxy/win32.c +++ /dev/null @@ -1,366 +0,0 @@ -const char win32_rcs[] = "$Id: win32.c,v 1.15 2009/02/09 19:16:35 fabiankeil Exp $"; -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/win32.c,v $ - * - * Purpose : Win32 User Interface initialization and message loop - * - * Copyright : Written by and Copyright (C) 2001-2002 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 1999 Adam Lock - * <locka(a)iol.ie> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: win32.c,v $ - * Revision 1.15 2009/02/09 19:16:35 fabiankeil - * Bump copyright year in win32_blurb[]. - * - * Revision 1.14 2008/03/02 18:15:41 fabiankeil - * Update copyright year in win32_blurb[]. - * - * Revision 1.13 2007/01/31 16:25:24 fabiankeil - * Update copyright range for the About message. - * - * Revision 1.12 2006/08/12 03:54:37 david__schmidt - * Windows service integration - * - * Revision 1.11 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.9.2.2 2002/08/27 18:03:40 oes - * Fixed stupid typo - * - * Revision 1.9.2.1 2002/08/21 17:59:27 oes - * Sync win32_blurb[] with our standard blurb - * - * Revision 1.9 2002/03/31 17:19:00 jongfoster - * Win32 only: Enabling STRICT to fix a VC++ compile warning. - * - * Revision 1.8 2002/03/26 22:57:10 jongfoster - * Web server name should begin www. - * - * Revision 1.7 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.6 2002/03/16 21:53:28 jongfoster - * VC++ Heap debug option - * - * Revision 1.5 2002/03/04 23:47:30 jongfoster - * - Rewritten, simpler command-line pre-parser - * - not using raise(SIGINT) any more - * - * Revision 1.4 2001/11/30 21:29:33 jongfoster - * Fixing a warning - * - * Revision 1.3 2001/11/16 00:46:31 jongfoster - * Fixing compiler warnings - * - * Revision 1.2 2001/07/29 19:32:00 jongfoster - * Renaming _main() [mingw32 only] to real_main(), for ANSI compliance. - * - * Revision 1.1.1.1 2001/05/15 13:59:08 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#include "config.h" - -#ifdef _WIN32 - -#include <stdio.h> - -#include "project.h" -#include "jcc.h" -#include "miscutil.h" - -/* Uncomment this if you want to build Win32 as a console app */ -/* #define _WIN_CONSOLE */ - -#ifndef STRICT -#define STRICT -#endif -#include <windows.h> - -#include <stdarg.h> -#include <process.h> - -#if defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG) -/* Visual C++ Heap debugging */ -#include <crtdbg.h> -#endif /* defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG) */ - -#include "win32.h" - -const char win32_h_rcs[] = WIN32_H_VERSION; - -/** - * A short introductory text about Privoxy. Used for the "About" box - * or the console startup message. - */ -const char win32_blurb[] = -"Privoxy version " VERSION " for Windows\n" -"Copyright (C) 2000-2009 the Privoxy Team (" HOME_PAGE_URL ")\n" -"Based on the Internet Junkbuster by Junkbusters Corp.\n" -"This is free software; it may be used and copied under the\n" -"GNU General Public License: http://www.gnu.org/copyleft/gpl.html .\n" -"This program comes with ABSOLUTELY NO WARRANTY OF ANY KIND.\n"; - -#ifdef _WIN_CONSOLE - -/** - * Hide the console. If set, the program will disconnect from the - * console and run in the background. This allows the command-prompt - * window to close. - */ -int hideConsole = 0; - - -#else /* ndef _WIN_CONSOLE */ - - -/** - * The application instance handle. - */ -HINSTANCE g_hInstance; - - -/** - * The command to show the window that was specified at startup. - */ -int g_nCmdShow; - -static void __cdecl UserInterfaceThread(void *); - - -#endif /* ndef _WIN_CONSOLE */ - -/********************************************************************* - * - * Function : WinMain - * - * Description : M$ Windows "main" routine: - * parse the `lpCmdLine' param into main's argc and argv variables, - * start the user interface thread (for the systray window), and - * call main (i.e. patch execution into normal startup). - * - * Parameters : - * 1 : hInstance = instance handle of this execution - * 2 : hPrevInstance = instance handle of previous execution - * 3 : lpCmdLine = command line string which started us - * 4 : nCmdShow = window show value (MIN, MAX, NORMAL, etc...) - * - * Returns : `main' never returns, so WinMain will also never return. - * - *********************************************************************/ -int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) -{ -#if 0 /* See comment about __argc & __argv below */ - int i; - int argc = 1; - const char *argv[3]; - char szModule[MAX_PATH+1]; -#endif - - int res; -#ifndef _WIN_CONSOLE - HANDLE hInitCompleteEvent = NULL; -#endif - - -#if defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG) -#if 0 - /* Visual C++ Heap debugging */ - - /* Get current flag*/ - int tmpFlag = _CrtSetDbgFlag( _CRTDBG_REPORT_FLAG ); - - /* Turn on leak-checking bit */ - tmpFlag |= _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF | _CRTDBG_CHECK_ALWAYS_DF; - - /* Turn off CRT block checking bit */ - tmpFlag &= ~(_CRTDBG_CHECK_CRT_DF | _CRTDBG_DELAY_FREE_MEM_DF); - - /* Set flag to the new value */ - _CrtSetDbgFlag( tmpFlag ); -#endif -#endif /* defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG) */ - - -/************ - * I couldn't figure out why the command line was being sorta parsed here - * instead of using the __argc & __argv globals usually defined in stdlib.h - * - * From what I can tell by looking at the MinWG source, it supports these - * globals, so i'd hope that the other compilers do so as well. - * Obviously, if i'm wrong i'll find out soon enough! :) - ************/ -#if 0 - /* - * Cheat in parsing the command line. We only ever have at most one - * paramater, which may optionally be specified inside double quotes. - */ - - if (lpCmdLine != NULL) - { - /* Make writable copy */ - lpCmdLine = strdup(lpCmdLine); - } - if (lpCmdLine != NULL) - { - chomp(lpCmdLine); - i = strlen(lpCmdLine); - if ((i >= 2) && (lpCmdLine[0] == '\"') && (lpCmdLine[i - 1] == '\"')) - { - lpCmdLine[i - 1] = '\0'; - lpCmdLine++; - } - if (lpCmdLine[0] == '\0') - { - lpCmdLine = NULL; - } - } - - GetModuleFileName(hInstance, szModule, MAX_PATH); - argv[0] = szModule; - argv[1] = lpCmdLine; - argv[2] = NULL; - argc = ((lpCmdLine != NULL) ? 2 : 1); -#endif /* -END- 0 */ - - -#ifndef _WIN_CONSOLE - /* Create a user-interface thread and wait for it to initialise */ - hInitCompleteEvent = CreateEvent(NULL, TRUE, FALSE, NULL); - g_hInstance = hInstance; - g_nCmdShow = nCmdShow; - _beginthread(UserInterfaceThread, 0, &hInitCompleteEvent); - WaitForSingleObject(hInitCompleteEvent, INFINITE); - DeleteObject(hInitCompleteEvent); -#endif - -#ifdef __MINGW32__ - res = real_main( __argc, __argv ); -#else - res = main( __argc, __argv ); -#endif - - return res; - -} - -#endif - -/********************************************************************* - * - * Function : InitWin32 - * - * Description : Initialise windows, setting up the console or windows as appropriate. - * - * Parameters : None - * - * Returns : N/A - * - *********************************************************************/ -void InitWin32(void) -{ - WORD wVersionRequested; - WSADATA wsaData; - -#ifdef _WIN_CONSOLE - SetProcessShutdownParameters(0x100, SHUTDOWN_NORETRY); - if (hideConsole) - { - FreeConsole(); - } -#endif - wVersionRequested = MAKEWORD(2, 0); - if (WSAStartup(wVersionRequested, &wsaData) != 0) - { -#ifndef _WIN_CONSOLE - MessageBox(NULL, "Cannot initialize WinSock library", "Privoxy Error", - MB_OK | MB_ICONERROR | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST); -#endif - exit(1); - } - -} - - -#ifndef _WIN_CONSOLE -#include <signal.h> -#include <assert.h> - -#include "win32.h" -#include "w32log.h" - - -/********************************************************************* - * - * Function : UserInterfaceThread - * - * Description : User interface thread. WinMain will wait for us to set - * the hInitCompleteEvent before patching over to `main'. - * This ensures the systray window is active before beginning - * operations. - * - * Parameters : - * 1 : pData = pointer to `hInitCompleteEvent'. - * - * Returns : N/A - * - *********************************************************************/ -static void __cdecl UserInterfaceThread(void *pData) -{ - MSG msg; - HANDLE hInitCompleteEvent = *((HANDLE *) pData); - - /* Initialise */ - InitLogWindow(); - SetEvent(hInitCompleteEvent); - - /* Enter a message processing loop */ - while (GetMessage(&msg, (HWND) NULL, 0, 0)) - { - TranslateMessage(&msg); - DispatchMessage(&msg); - } - - /* Cleanup */ - TermLogWindow(); - - /* Time to die... */ - exit(0); - -} - - -#endif /* ndef _WIN_CONSOLE */ - - -/* - Local Variables: - tab-width: 3 - end: -*/ diff --git a/external/privoxy/win32.h b/external/privoxy/win32.h deleted file mode 100644 index 1b4e814..0000000 --- a/external/privoxy/win32.h +++ /dev/null @@ -1,94 +0,0 @@ -#ifndef WIN32_H_INCLUDED -#define WIN32_H_INCLUDED -#define WIN32_H_VERSION "$Id: win32.h,v 1.7 2006/07/18 14:48:48 david__schmidt Exp $" -/********************************************************************* - * - * File : $Source: /cvsroot/ijbswa/current/win32.h,v $ - * - * Purpose : Win32 User Interface initialization and message loop - * - * Copyright : Written by and Copyright (C) 2001-2002 members of - * the Privoxy team. http://www.privoxy.org/ - * - * Written by and Copyright (C) 1999 Adam Lock - * <locka(a)iol.ie> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will - * be useful, but WITHOUT ANY WARRANTY; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A - * PARTICULAR PURPOSE. See the GNU General Public - * License for more details. - * - * The GNU General Public License should be included with - * this file. If not, you can view it at - * http://www.gnu.org/copyleft/gpl.html - * or write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Revisions : - * $Log: win32.h,v $ - * Revision 1.7 2006/07/18 14:48:48 david__schmidt - * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) - * with what was really the latest development (the v_3_0_branch branch) - * - * Revision 1.5 2002/03/26 22:57:10 jongfoster - * Web server name should begin www. - * - * Revision 1.4 2002/03/24 12:03:47 jongfoster - * Name change - * - * Revision 1.3 2001/07/30 22:08:36 jongfoster - * Tidying up #defines: - * - All feature #defines are now of the form FEATURE_xxx - * - Permanently turned off WIN_GUI_EDIT - * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS - * - * Revision 1.2 2001/07/29 18:43:08 jongfoster - * Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to - * ANSI C rules. - * - * Revision 1.1.1.1 2001/05/15 13:59:08 oes - * Initial import of version 2.9.3 source tree - * - * - *********************************************************************/ - - -#ifdef __cplusplus -extern "C" { -#endif - -extern const char win32_blurb[]; - -extern void InitWin32(void); - -#ifdef _WIN_CONSOLE -extern int hideConsole; -#endif /*def _WIN_CONSOLE */ - -extern HINSTANCE g_hInstance; -extern int g_nCmdShow; - -extern int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow); - -/* Revision control strings from this header and associated .c file */ -extern const char win32_rcs[]; -extern const char win32_h_rcs[]; - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* ndef WIN32_H_INCLUDED */ - -/* - Local Variables: - tab-width: 3 - end: -*/

2 1

[stem/master] Updating TorCtl url
by atagar＠torproject.org 31 Dec '12

31 Dec '12

commit 7cbb066c214c227fb65dece7b282aa314a731d41 Author: Damian Johnson <atagar(a)torproject.org> Date: Mon Dec 31 15:16:58 2012 -0800 Updating TorCtl url TorCtl is no longer on the volunteer page so pointing to its git repo instead. --- docs/index.rst | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/docs/index.rst b/docs/index.rst index f0a6b67..0da7d57 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -1,7 +1,7 @@ Welcome to Stem! ================ -Stem is a python controller library for `Tor <https://www.torproject.org/>`_. Like its predecessor, `TorCtl <https://www.torproject.org/getinvolved/volunteer.html.en#project-torctl>`_, it uses Tor's `control protocol <https://gitweb.torproject.org/torspec.git/blob/HEAD:/control-spec.txt>`_ to help developers program against the Tor process, enabling them to build things similar to `Vidalia <https://www.torproject.org/getinvolved/volunteer.html.en#project-vidalia>`_ and `arm <http://www.atagar.com/arm/>`_. +Stem is a python controller library for `Tor <https://www.torproject.org/>`_. Like its predecessor, `TorCtl <https://gitweb.torproject.org/pytorctl.git>`_, it uses Tor's `control protocol <https://gitweb.torproject.org/torspec.git/blob/HEAD:/control-spec.txt>`_ to help developers program against the Tor process, enabling them to build things similar to `Vidalia <https://www.torproject.org/getinvolved/volunteer.html.en#project-vidalia>`_ and `arm <http://www.atagar.com/arm/>`_. .. Main Stem Logo Source: http://www.wpclipart.com/plants/assorted/P/plant_stem.png.html

1 0

r25983: {website} Dropping TorCtl from the projects listing TorCtl is being me (website/trunk/getinvolved/en)
by Damian Johnson 31 Dec '12

31 Dec '12

Author: atagar Date: 2012-12-31 23:16:02 +0000 (Mon, 31 Dec 2012) New Revision: 25983 Modified: website/trunk/getinvolved/en/volunteer.wml Log: Dropping TorCtl from the projects listing TorCtl is being merged with TorFlow, as per... https://blog.torproject.org/blog/torctl-deprecation-and-stem-plans Dropping it from the volunteer page's project listing. Modified: website/trunk/getinvolved/en/volunteer.wml =================================================================== --- website/trunk/getinvolved/en/volunteer.wml 2012-12-29 04:52:03 UTC (rev 25982) +++ website/trunk/getinvolved/en/volunteer.wml 2012-12-31 23:16:02 UTC (rev 25983) @@ -281,14 +281,6 @@ </tr> <tr> - <td><a href="#project-torctl">TorCtl</a></td> - <td>Library</td> - <td>Python</td> - <td>None</td> - <td>aagbsn</td> - </tr> - - <tr class="alt"> <td><a href="#project-tlsdate">Tlsdate</a></td> <td>Utility</td> <td>C</td> @@ -296,7 +288,7 @@ <td>ioerror</td> </tr> - <tr> + <tr class="alt"> <td><a href="#project-metrics">Metrics</a></td> <td>Client Service</td> <td>Java</td> @@ -304,7 +296,7 @@ <td>karsten</td> </tr> - <tr class="alt"> + <tr> <td><a href="#project-atlas">Atlas</a></td> <td>Client Service</td> <td>JavaScript</td> @@ -312,7 +304,7 @@ <td>hellais</td> </tr> - <tr> + <tr class="alt"> <td><a href="#project-torstatus">TorStatus</a></td> <td>Client Service</td> <td>Python, Django</td> @@ -320,7 +312,7 @@ <td></td> </tr> - <tr class="alt"> + <tr> <td><a href="#project-compass">Compass</a></td> <td>Client Service</td> <td>Python</td> @@ -328,7 +320,7 @@ <td>gsathya, karsten</td> </tr> - <tr> + <tr class="alt"> <td><a href="#project-torperf">Torperf</a></td> <td>Client Service</td> <td>C, Python</td> @@ -336,7 +328,7 @@ <td>karsten</td> </tr> - <tr class="alt"> + <tr> <td><a href="#project-onionoo">Onionoo</a></td> <td>Backend Service</td> <td>Java, Python</td> @@ -344,7 +336,7 @@ <td>karsten, gsathya</td> </tr> - <tr> + <tr class="alt"> <td><a href="#project-weather">Weather</a></td> <td>Client Service</td> <td>Python</td> @@ -352,7 +344,7 @@ <td>kaner</td> </tr> - <tr class="alt"> + <tr> <td><a href="#project-gettor">GetTor</a></td> <td>Client Service</td> <td>Python</td> @@ -360,7 +352,7 @@ <td>kaner</td> </tr> - <tr> + <tr class="alt"> <td><a href="#project-torcheck">TorCheck</a></td> <td>Client Service</td> <td>Python, Perl</td> @@ -368,7 +360,7 @@ <td>ioerror</td> </tr> - <tr class="alt"> + <tr> <td><a href="#project-bridgedb">BridgeDB</a></td> <td>Backend Service</td> <td>Python</td> @@ -376,7 +368,7 @@ <td>kaner, nickm</td> </tr> - <tr> + <tr class="alt"> <td><a href="#project-ooni-probe">Ooni Probe</a></td> <td>Scanner</td> <td>Python</td> @@ -384,7 +376,7 @@ <td>hellais, isis, ioerror</td> </tr> - <tr class="alt"> + <tr> <td><a href="#project-torflow">TorFlow</a></td> <td>Backend Service</td> <td>Python</td> @@ -392,7 +384,7 @@ <td>aagbsn, mikeperry</td> </tr> - <tr> + <tr class="alt"> <td>*<a href="#project-torbel">TorBEL</a></td> <td>Backend Service</td> <td>Python</td> @@ -400,7 +392,7 @@ <td>Sebastian</td> </tr> - <tr class="alt"> + <tr> <td><a href="#project-tor2web">Tor2web</a></td> <td>Client Service</td> <td>Python</td> @@ -408,7 +400,7 @@ <td>hellais</td> </tr> - <tr> + <tr class="alt"> <td><a href="#project-anonbib">Anonbib</a></td> <td>Website</td> <td>Python</td> @@ -752,8 +744,8 @@ tracker</a>)</h3> <p> - Python controller library with a similar scope to TorCtl, but with better - testing, documentation, and API. This project is not yet feature complete. + Python controller library for scripts and controller applications using + Tor. </p> <p> @@ -772,17 +764,6 @@ Used by OONI and APAF. </p> - <a id="project-torctl"></a> - <h3>TorCtl (<a - href="https://gitweb.torproject.org/pytorctl.git">code</a>, <a - href="https://trac.torproject.org/projects/tor/query?status=accepted&status=assig…">bug - tracker</a>)</h3> - - <p> - Python bindings and utilities for using the Tor control port. It has been - stable for several years, with only minor revisions. - </p> - <a id="project-tlsdate"></a> <h3>Tlsdate (<a href="https://github.com/ioerror/tlsdate">code</a>)</h3> @@ -1839,7 +1820,7 @@ <p> <a href="https://stem.torproject.org/">Stem</a> is a python controller library for tor. Like it's predecessor, <a - href="#project-torctl">TorCtl</a>, it uses tor's <a + href="https://gitweb.torproject.org/pytorctl.git">TorCtl</a>, it uses tor's <a href="https://gitweb.torproject.org/torspec.git/blob/HEAD:/control-spec.txt">control protocol</a> to help developers program against the tor process, enabling them to build things similar to <a href="#project-vidalia">Vidalia</a> and

1 0

[translation/vidalia_help_completed] Update translations for vidalia_help_completed
by translation＠torproject.org 31 Dec '12

31 Dec '12

commit ae3e4f882f4309cbb052296d775dca2b20e6c64e Author: Translation commit bot <translation(a)torproject.org> Date: Mon Dec 31 20:15:37 2012 +0000 Update translations for vidalia_help_completed --- es/server.po | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/es/server.po b/es/server.po index 74fc95e..262ec1c 100644 --- a/es/server.po +++ b/es/server.po @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 17:00+0200\n" -"PO-Revision-Date: 2012-12-30 03:38+0000\n" +"PO-Revision-Date: 2012-12-31 20:03+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -104,7 +104,7 @@ msgid "" "mirror the relay directory, make sure the <i>Directory Port</i> is different" " than the <i>Relay port</i> you entered above. Bridge relays <i>must</i> " "mirror the relay directory." -msgstr "Si desea replicar el repositorio de repetidores (relays) de Tor para otros usuarios de la red, debe marcar la casilla <i>Replicar el repositorio de repetidores</i>. Si no dispone de mucho ancho de banda, no marque esta casilla. Si decide replicar el listado de repetidores, asegúrese de que el <i>Puerto de su repositorio de repetidores</i> es diferente al <i>Puerto de su repetidor</i> que ha introducido arriba. Los repetidores puente (bridges) están <i>obligados</i> a replicar el listado de repetidores." +msgstr "Si desea replicar el repositorio de repetidores de Tor para otros usuarios de la red, debe marcar la casilla <i>Replicar el repositorio de repetidores</i>. Si no dispone de mucho ancho de banda, no marque esta casilla. Si decide replicar el listado de repetidores, asegúrese de que el <i>Puerto de su repositorio de repetidores</i> es diferente al <i>Puerto de su repetidor</i> que ha introducido arriba. Los repetidores puente (bridges) están <i>obligados</i> a replicar el listado de repetidores." #. type: Content of: <html><body> #: en/server.html:71 @@ -170,12 +170,12 @@ msgid "" "outgoing bytes than incoming. If you find this is the case and is putting " "too much strain on your bandwidth, you should consider unchecking the " "checkbox labeled <i>Mirror the relay directory</i>." -msgstr "Es importante recordar que Tor mide el ancho de banda en <b>bytes</b>, no en bits. Además, Tor sólo cuenta los bytes recibidos en lugar de los bytes enviados. Por ejemplo, si su repetidor actua como réplica de repositorio de repetidores (relays), podría estar enviando más bytes de los que recibe. Si descubre que este es el caso y que está saturando demasiado su ancho de banda, debería considerar no marcar la casilla <i>Replicar repositorio de repetidores</i>." +msgstr "Es importante recordar que Tor mide el ancho de banda en <b>bytes</b>, no en bits. Además, Tor sólo cuenta los bytes recibidos en lugar de los bytes enviados. Por ejemplo, si su repetidor actua como réplica de repositorio de repetidores, podría estar enviando más bytes de los que recibe. Si descubre que este es el caso y que está saturando demasiado su ancho de banda, debería considerar no marcar la casilla <i>Replicar repositorio de repetidores</i>." #. type: Content of: <html><body> #: en/server.html:111 msgid "<a name=\"exitpolicy\"/>" -msgstr "<a name=\"policassalida\"/>" +msgstr "<a name=\"politicasdesalida\"/>" #. type: Content of: <html><body><h3> #: en/server.html:112

1 0

[translation/vidalia_help] Update translations for vidalia_help
by translation＠torproject.org 31 Dec '12

31 Dec '12

commit e9ae42db3e5e472dd802ae66aa2d2bb657cdaed0 Author: Translation commit bot <translation(a)torproject.org> Date: Mon Dec 31 20:15:28 2012 +0000 Update translations for vidalia_help --- es/server.po | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/es/server.po b/es/server.po index 74fc95e..262ec1c 100644 --- a/es/server.po +++ b/es/server.po @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 17:00+0200\n" -"PO-Revision-Date: 2012-12-30 03:38+0000\n" +"PO-Revision-Date: 2012-12-31 20:03+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -104,7 +104,7 @@ msgid "" "mirror the relay directory, make sure the <i>Directory Port</i> is different" " than the <i>Relay port</i> you entered above. Bridge relays <i>must</i> " "mirror the relay directory." -msgstr "Si desea replicar el repositorio de repetidores (relays) de Tor para otros usuarios de la red, debe marcar la casilla <i>Replicar el repositorio de repetidores</i>. Si no dispone de mucho ancho de banda, no marque esta casilla. Si decide replicar el listado de repetidores, asegúrese de que el <i>Puerto de su repositorio de repetidores</i> es diferente al <i>Puerto de su repetidor</i> que ha introducido arriba. Los repetidores puente (bridges) están <i>obligados</i> a replicar el listado de repetidores." +msgstr "Si desea replicar el repositorio de repetidores de Tor para otros usuarios de la red, debe marcar la casilla <i>Replicar el repositorio de repetidores</i>. Si no dispone de mucho ancho de banda, no marque esta casilla. Si decide replicar el listado de repetidores, asegúrese de que el <i>Puerto de su repositorio de repetidores</i> es diferente al <i>Puerto de su repetidor</i> que ha introducido arriba. Los repetidores puente (bridges) están <i>obligados</i> a replicar el listado de repetidores." #. type: Content of: <html><body> #: en/server.html:71 @@ -170,12 +170,12 @@ msgid "" "outgoing bytes than incoming. If you find this is the case and is putting " "too much strain on your bandwidth, you should consider unchecking the " "checkbox labeled <i>Mirror the relay directory</i>." -msgstr "Es importante recordar que Tor mide el ancho de banda en <b>bytes</b>, no en bits. Además, Tor sólo cuenta los bytes recibidos en lugar de los bytes enviados. Por ejemplo, si su repetidor actua como réplica de repositorio de repetidores (relays), podría estar enviando más bytes de los que recibe. Si descubre que este es el caso y que está saturando demasiado su ancho de banda, debería considerar no marcar la casilla <i>Replicar repositorio de repetidores</i>." +msgstr "Es importante recordar que Tor mide el ancho de banda en <b>bytes</b>, no en bits. Además, Tor sólo cuenta los bytes recibidos en lugar de los bytes enviados. Por ejemplo, si su repetidor actua como réplica de repositorio de repetidores, podría estar enviando más bytes de los que recibe. Si descubre que este es el caso y que está saturando demasiado su ancho de banda, debería considerar no marcar la casilla <i>Replicar repositorio de repetidores</i>." #. type: Content of: <html><body> #: en/server.html:111 msgid "<a name=\"exitpolicy\"/>" -msgstr "<a name=\"policassalida\"/>" +msgstr "<a name=\"politicasdesalida\"/>" #. type: Content of: <html><body><h3> #: en/server.html:112

1 0

[translation/vidalia_help_completed] Update translations for vidalia_help_completed
by translation＠torproject.org 31 Dec '12

31 Dec '12

commit b2ee0c3703a246c8fddb3c319b5aab44ab651dca Author: Translation commit bot <translation(a)torproject.org> Date: Mon Dec 31 19:45:35 2012 +0000 Update translations for vidalia_help_completed --- es/bridges.po | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/es/bridges.po b/es/bridges.po index 93ba5be..84d0a80 100644 --- a/es/bridges.po +++ b/es/bridges.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 16:58+0200\n" -"PO-Revision-Date: 2012-12-31 19:06+0000\n" +"PO-Revision-Date: 2012-12-31 19:37+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -47,7 +47,7 @@ msgstr "Algunos proveedores de servicios de Internet (ISPs) intentan evitar que #. type: Content of: <html><body> #: en/bridges.html:31 msgid "<a name=\"finding\"/>" -msgstr "<nombre=\"buscando\">" +msgstr "<a name=\"buscando\">" #. type: Content of: <html><body><h3> #: en/bridges.html:32 @@ -62,7 +62,7 @@ msgstr "Principalmente hay dos maneras de obtener una dirección de bridge:" #. type: Content of: <html><body><p><ol><li> #: en/bridges.html:36 msgid "Get some friends to run private bridges for you" -msgstr "Convenza a algunos amigos para que mantengan bridges privados para usted" +msgstr "Convenza a algunos amigos para que mantengan bridges de acceso privado para usted" #. type: Content of: <html><body><p><ol><li> #: en/bridges.html:37

1 0

[translation/vidalia_help] Update translations for vidalia_help
by translation＠torproject.org 31 Dec '12

31 Dec '12

commit b23e35824d4384c09fd7bcec881be5c040c65eb9 Author: Translation commit bot <translation(a)torproject.org> Date: Mon Dec 31 19:45:27 2012 +0000 Update translations for vidalia_help --- es/bridges.po | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/es/bridges.po b/es/bridges.po index 93ba5be..84d0a80 100644 --- a/es/bridges.po +++ b/es/bridges.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 16:58+0200\n" -"PO-Revision-Date: 2012-12-31 19:06+0000\n" +"PO-Revision-Date: 2012-12-31 19:37+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -47,7 +47,7 @@ msgstr "Algunos proveedores de servicios de Internet (ISPs) intentan evitar que #. type: Content of: <html><body> #: en/bridges.html:31 msgid "<a name=\"finding\"/>" -msgstr "<nombre=\"buscando\">" +msgstr "<a name=\"buscando\">" #. type: Content of: <html><body><h3> #: en/bridges.html:32 @@ -62,7 +62,7 @@ msgstr "Principalmente hay dos maneras de obtener una dirección de bridge:" #. type: Content of: <html><body><p><ol><li> #: en/bridges.html:36 msgid "Get some friends to run private bridges for you" -msgstr "Convenza a algunos amigos para que mantengan bridges privados para usted" +msgstr "Convenza a algunos amigos para que mantengan bridges de acceso privado para usted" #. type: Content of: <html><body><p><ol><li> #: en/bridges.html:37

1 0

[translation/vidalia_help_completed] Update translations for vidalia_help_completed
by translation＠torproject.org 31 Dec '12

31 Dec '12

commit cf3ff7991aad702bdc8b24e18ef52f37fbdbd6ad Author: Translation commit bot <translation(a)torproject.org> Date: Mon Dec 31 19:15:39 2012 +0000 Update translations for vidalia_help_completed --- es/bridges.po | 4 ++-- es/services.po | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/es/bridges.po b/es/bridges.po index 158fe2b..93ba5be 100644 --- a/es/bridges.po +++ b/es/bridges.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 16:58+0200\n" -"PO-Revision-Date: 2012-12-21 00:46+0000\n" +"PO-Revision-Date: 2012-12-31 19:06+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -24,7 +24,7 @@ msgstr "Repetidores puente (bridges)" #. type: Content of: <html><body> #: en/bridges.html:19 msgid "<a name=\"about\"/>" -msgstr "<nombre=\"acerca_de\">" +msgstr "<a name=\"acercade\">" #. type: Content of: <html><body><h3> #: en/bridges.html:20 diff --git a/es/services.po b/es/services.po index ebb8148..adc6448 100644 --- a/es/services.po +++ b/es/services.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 17:00+0200\n" -"PO-Revision-Date: 2012-12-31 14:23+0000\n" +"PO-Revision-Date: 2012-12-31 19:04+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -236,7 +236,7 @@ msgstr "<a name=\"cliente\"/>" #. type: Content of: <html><body><h3> #: en/services.html:136 msgid "How does Vidalia help me to access other hidden services?" -msgstr "¿Cómo me facilita Vidalia el acceso a otros servicios ocultos?" +msgstr "¿Cómo me facilita Vidalia el acceso a otros servicios ocultos?" #. type: Content of: <html><body><p> #: en/services.html:138 @@ -245,4 +245,4 @@ msgid "" "service, type the service's onion address in your browser (or appropriate " "client application if it's not a web service), and Tor does the rest for " "you. There is no need to specifically configure Tor for that." -msgstr "Eso ya no es necesario en aboluto. Si desea acceder a otro servicio oculto, escriba la dirección .onion del servicio en su navegador (o en una aplicación cliente adecuada si no se trata de un servicio web), y Tor hará el resto por usted. No hay necesidad de realizar configuraciones específicas en Tor para ello." +msgstr "Esto ya no es necesario en aboluto. Si desea acceder a otro servicio oculto, escriba la dirección .onion del servicio en su navegador (o en una aplicación cliente adecuada si no se trata de un servicio web), y Tor hará el resto por usted. No hay necesidad de realizar configuraciones específicas en Tor para ello."

1 0

[translation/vidalia_help] Update translations for vidalia_help
by translation＠torproject.org 31 Dec '12

31 Dec '12

commit 3d2090324a9f702d11a27713401b788acf2dc973 Author: Translation commit bot <translation(a)torproject.org> Date: Mon Dec 31 19:15:29 2012 +0000 Update translations for vidalia_help --- es/bridges.po | 4 ++-- es/services.po | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/es/bridges.po b/es/bridges.po index 158fe2b..93ba5be 100644 --- a/es/bridges.po +++ b/es/bridges.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 16:58+0200\n" -"PO-Revision-Date: 2012-12-21 00:46+0000\n" +"PO-Revision-Date: 2012-12-31 19:06+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -24,7 +24,7 @@ msgstr "Repetidores puente (bridges)" #. type: Content of: <html><body> #: en/bridges.html:19 msgid "<a name=\"about\"/>" -msgstr "<nombre=\"acerca_de\">" +msgstr "<a name=\"acercade\">" #. type: Content of: <html><body><h3> #: en/bridges.html:20 diff --git a/es/services.po b/es/services.po index ebb8148..adc6448 100644 --- a/es/services.po +++ b/es/services.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: The Tor Project\n" "Report-Msgid-Bugs-To: https://trac.torproject.org/projects/tor\n" "POT-Creation-Date: 2010-06-26 17:00+0200\n" -"PO-Revision-Date: 2012-12-31 14:23+0000\n" +"PO-Revision-Date: 2012-12-31 19:04+0000\n" "Last-Translator: strel <strelnic(a)gmail.com>\n" "Language-Team: Spanish (http://www.transifex.com/projects/p/torproject/language/es/)\n" "MIME-Version: 1.0\n" @@ -236,7 +236,7 @@ msgstr "<a name=\"cliente\"/>" #. type: Content of: <html><body><h3> #: en/services.html:136 msgid "How does Vidalia help me to access other hidden services?" -msgstr "¿Cómo me facilita Vidalia el acceso a otros servicios ocultos?" +msgstr "¿Cómo me facilita Vidalia el acceso a otros servicios ocultos?" #. type: Content of: <html><body><p> #: en/services.html:138 @@ -245,4 +245,4 @@ msgid "" "service, type the service's onion address in your browser (or appropriate " "client application if it's not a web service), and Tor does the rest for " "you. There is no need to specifically configure Tor for that." -msgstr "Eso ya no es necesario en aboluto. Si desea acceder a otro servicio oculto, escriba la dirección .onion del servicio en su navegador (o en una aplicación cliente adecuada si no se trata de un servicio web), y Tor hará el resto por usted. No hay necesidad de realizar configuraciones específicas en Tor para ello." +msgstr "Esto ya no es necesario en aboluto. Si desea acceder a otro servicio oculto, escriba la dirección .onion del servicio en su navegador (o en una aplicación cliente adecuada si no se trata de un servicio web), y Tor hará el resto por usted. No hay necesidad de realizar configuraciones específicas en Tor para ello."

1 0

[tor/master] Fix a couple of harmless clang3.2 warnings
by nickm＠torproject.org 31 Dec '12

31 Dec '12

commit 11e8a445c3051f017600b27999f0d666b7d63b04 Author: Sebastian Hahn <sebastian(a)torproject.org> Date: Mon Dec 31 18:23:28 2012 +0100 Fix a couple of harmless clang3.2 warnings --- changes/clang_enum_warnings | 3 +++ src/common/crypto.c | 2 +- src/or/dirvote.c | 4 ++-- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/changes/clang_enum_warnings b/changes/clang_enum_warnings new file mode 100644 index 0000000..50de605 --- /dev/null +++ b/changes/clang_enum_warnings @@ -0,0 +1,3 @@ + o Code simplifications and refactoring: + - Get rid of a couple of harmless clang warnings, where we compared + enums to ints. These warnings are newly introduced in clang 3.2. diff --git a/src/common/crypto.c b/src/common/crypto.c index 39f5a4a..4cf9a9c 100644 --- a/src/common/crypto.c +++ b/src/common/crypto.c @@ -1458,7 +1458,7 @@ crypto_digest256(char *digest, const char *m, size_t len, int crypto_digest_all(digests_t *ds_out, const char *m, size_t len) { - digest_algorithm_t i; + int i; tor_assert(ds_out); memset(ds_out, 0, sizeof(*ds_out)); if (crypto_digest(ds_out->d[DIGEST_SHA1], m, len) < 0) diff --git a/src/or/dirvote.c b/src/or/dirvote.c index 1b9af0f..3000ee2 100644 --- a/src/or/dirvote.c +++ b/src/or/dirvote.c @@ -2223,7 +2223,7 @@ networkstatus_add_detached_signatures(networkstatus_t *target, { digests_t *digests = strmap_get(sigs->digests, flavor); int n_matches = 0; - digest_algorithm_t alg; + int alg; if (!digests) { *msg_out = "No digests for given consensus flavor"; return -1; @@ -3471,7 +3471,7 @@ dirvote_free_all(void) const char * dirvote_get_pending_consensus(consensus_flavor_t flav) { - tor_assert(((int)flav) >= 0 && flav < N_CONSENSUS_FLAVORS); + tor_assert(((int)flav) >= 0 && (int)flav < N_CONSENSUS_FLAVORS); return pending_consensuses[flav].body; }

1 0

Jump to page: