[tor-relays] Over 55k eth RX errors

[fatal]

assuming that you run a linux realy, have a look at the interface with
ethtool

sudo ethtool eth0

and look if it is in full of half duplex mode. If it is in halfduplex
mode that will probably be the cause of the errors. you could try
setting it to full duplex mode with e. g. 100 mbit/s with the following
command:

sudo ethtool -s eth0 speed 100 duplex full autoneg off

this might crash your network connection, so be prepared for a remote
reboot of the machine (or use IPMI if available).

On 19.03.2017 11:55, patacca wrote:
> Hi everyone,
> I am running an exit node[1] with nocix (previously known as datashack)
> and everything worked pretty well until the beginning of March when they
> moved the physical location of my dedicated server: since then I am
> registering a lot of eth0 errors[2] and, as atlas is showing, a lot of
> downtime. Note also that previously I've run the server for like a year
> without any single eth error!
> I've already contacted them asking to check the cables and they replied
> everything it's ok but I am starting to think that *it must be* some
> kind of hardware issue.
> I'd like to debug the issue furthermore to excude any software related
> problem but I don't know what to do, has anybody got a hint?
> 
> Thanks,
> patacca
> 
> 
> 
> [1]
> https://atlas.torproject.org/#details/2B72D043164D5036BC1087613830E2ED5C60695A
> [2] http://pastebin.com/7ZYXmTGE
> _______________________________________________
> tor-relays mailing list
> tor-relays at lists.torproject.org
> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
>