[tor-commits] [tor/release-0.3.5] hs-v3: Close client intro circuits if the descriptor is replaced

nickm at torproject.org nickm at torproject.org
Fri Nov 16 13:58:31 UTC 2018


commit 9ba16c4d03a39bcd369ccd59f6bfa351f4b527d5
Author: David Goulet <dgoulet at torproject.org>
Date:   Fri Oct 12 09:22:30 2018 -0400

    hs-v3: Close client intro circuits if the descriptor is replaced
    
    When storing a descriptor in the client cache, if we are about to replace an
    existing descriptor, make sure to close every introduction circuits of the old
    descriptor so we don't have leftovers lying around.
    
    Ticket 27471 describes a situation where tor is sending an INTRODUCE1 cell on
    an introduction circuit for which it doesn't have a matching intro point
    object (taken from the descriptor).
    
    The main theory is that, after a new descriptor showed up, the introduction
    points changed which led to selecting an introduction circuit not used by the
    service anymore thus for which we are unable to find the corresponding
    introduction point within the descriptor we just fetched.
    
    Closes #27471.
    
    Signed-off-by: David Goulet <dgoulet at torproject.org>
---
 changes/ticket27471            |  5 +++++
 src/core/or/circuitlist.c      | 49 +++++++++++++++++++++++++++++++-----------
 src/core/or/circuitlist.h      |  3 ++-
 src/feature/hs/hs_cache.c      |  7 ++++++
 src/feature/hs/hs_client.c     | 32 +++++++++++++++++++++++++++
 src/feature/hs/hs_client.h     |  1 +
 src/feature/rend/rendservice.c |  2 +-
 7 files changed, 85 insertions(+), 14 deletions(-)

diff --git a/changes/ticket27471 b/changes/ticket27471
new file mode 100644
index 000000000..ffe77d268
--- /dev/null
+++ b/changes/ticket27471
@@ -0,0 +1,5 @@
+  o Minor bugfixes (hidden service v3, client):
+    - When replacing a descriptor in the client cache with a newer descriptor,
+      make sure to close all client introduction circuits of the old
+      descriptor so we don't end up with unusable leftover circuits. Fixes bug
+      27471; bugfix on 0.3.2.1-alpha.
diff --git a/src/core/or/circuitlist.c b/src/core/or/circuitlist.c
index 5ff142c15..35efc6541 100644
--- a/src/core/or/circuitlist.c
+++ b/src/core/or/circuitlist.c
@@ -1644,15 +1644,24 @@ circuit_get_ready_rend_circ_by_rend_data(const rend_data_t *rend_data)
   return NULL;
 }
 
-/** Return the first service introduction circuit originating from the global
- * circuit list after <b>start</b> or at the start of the list if <b>start</b>
- * is NULL. Return NULL if no circuit is found.
+/** Return the first introduction circuit originating from the global circuit
+ * list after <b>start</b> or at the start of the list if <b>start</b> is
+ * NULL. Return NULL if no circuit is found.
+ *
+ * If <b>want_client_circ</b> is true, then we are looking for client-side
+ * introduction circuits: A client introduction point circuit has a purpose of
+ * either CIRCUIT_PURPOSE_C_INTRODUCING, CIRCUIT_PURPOSE_C_INTRODUCE_ACK_WAIT
+ * or CIRCUIT_PURPOSE_C_INTRODUCE_ACKED. This does not return a circuit marked
+ * for close, but it returns circuits regardless of their circuit state.
  *
- * A service introduction point circuit has a purpose of either
- * CIRCUIT_PURPOSE_S_ESTABLISH_INTRO or CIRCUIT_PURPOSE_S_INTRO. This does not
- * return a circuit marked for close and its state must be open. */
+ * If <b>want_client_circ</b> is false, then we are looking for service-side
+ * introduction circuits: A service introduction point circuit has a purpose of
+ * either CIRCUIT_PURPOSE_S_ESTABLISH_INTRO or CIRCUIT_PURPOSE_S_INTRO. This
+ * does not return circuits marked for close, or in any state other than open.
+ */
 origin_circuit_t *
-circuit_get_next_service_intro_circ(origin_circuit_t *start)
+circuit_get_next_intro_circ(const origin_circuit_t *start,
+                            bool want_client_circ)
 {
   int idx = 0;
   smartlist_t *lst = circuit_get_global_list();
@@ -1664,13 +1673,29 @@ circuit_get_next_service_intro_circ(origin_circuit_t *start)
   for ( ; idx < smartlist_len(lst); ++idx) {
     circuit_t *circ = smartlist_get(lst, idx);
 
-    /* Ignore a marked for close circuit or purpose not matching a service
-     * intro point or if the state is not open. */
-    if (circ->marked_for_close || circ->state != CIRCUIT_STATE_OPEN ||
-        (circ->purpose != CIRCUIT_PURPOSE_S_ESTABLISH_INTRO &&
-         circ->purpose != CIRCUIT_PURPOSE_S_INTRO)) {
+    /* Ignore a marked for close circuit or if the state is not open. */
+    if (circ->marked_for_close) {
       continue;
     }
+
+    /* Depending on whether we are looking for client or service circs, skip
+     * circuits with other purposes. */
+    if (want_client_circ) {
+      if (circ->purpose != CIRCUIT_PURPOSE_C_INTRODUCING &&
+          circ->purpose != CIRCUIT_PURPOSE_C_INTRODUCE_ACK_WAIT &&
+          circ->purpose != CIRCUIT_PURPOSE_C_INTRODUCE_ACKED) {
+        continue;
+      }
+    } else { /* we are looking for service-side circs */
+      if (circ->state != CIRCUIT_STATE_OPEN) {
+        continue;
+      }
+      if (circ->purpose != CIRCUIT_PURPOSE_S_ESTABLISH_INTRO &&
+          circ->purpose != CIRCUIT_PURPOSE_S_INTRO) {
+        continue;
+      }
+    }
+
     /* The purposes we are looking for are only for origin circuits so the
      * following is valid. */
     return TO_ORIGIN_CIRCUIT(circ);
diff --git a/src/core/or/circuitlist.h b/src/core/or/circuitlist.h
index dac11431c..cb89d1820 100644
--- a/src/core/or/circuitlist.h
+++ b/src/core/or/circuitlist.h
@@ -202,7 +202,8 @@ origin_circuit_t *circuit_get_ready_rend_circ_by_rend_data(
   const rend_data_t *rend_data);
 origin_circuit_t *circuit_get_next_by_pk_and_purpose(origin_circuit_t *start,
                                      const uint8_t *digest, uint8_t purpose);
-origin_circuit_t *circuit_get_next_service_intro_circ(origin_circuit_t *start);
+origin_circuit_t *circuit_get_next_intro_circ(const origin_circuit_t *start,
+                                              bool want_client_circ);
 origin_circuit_t *circuit_get_next_service_rp_circ(origin_circuit_t *start);
 origin_circuit_t *circuit_get_next_service_hsdir_circ(origin_circuit_t *start);
 origin_circuit_t *circuit_find_to_cannibalize(uint8_t purpose,
diff --git a/src/feature/hs/hs_cache.c b/src/feature/hs/hs_cache.c
index b9bcb446a..afd69e1be 100644
--- a/src/feature/hs/hs_cache.c
+++ b/src/feature/hs/hs_cache.c
@@ -647,6 +647,13 @@ cache_store_as_client(hs_cache_client_descriptor_t *client_desc)
     }
     /* Remove old entry. Make space for the new one! */
     remove_v3_desc_as_client(cache_entry);
+
+    /* We just removed an old descriptor and will replace it. We'll close all
+     * intro circuits related to this old one so we don't have leftovers. We
+     * leave the rendezvous circuits opened because they could be in use. */
+    hs_client_close_intro_circuits_from_desc(cache_entry->desc);
+
+    /* Free it. */
     cache_client_desc_free(cache_entry);
   }
 
diff --git a/src/feature/hs/hs_client.c b/src/feature/hs/hs_client.c
index 11e24a366..dfad216ab 100644
--- a/src/feature/hs/hs_client.c
+++ b/src/feature/hs/hs_client.c
@@ -1844,6 +1844,38 @@ hs_client_reextend_intro_circuit(origin_circuit_t *circ)
   return ret;
 }
 
+/* Close all client introduction circuits related to the given descriptor.
+ * This is called with a descriptor that is about to get replaced in the
+ * client cache.
+ *
+ * Even though the introduction point might be exactly the same, we'll rebuild
+ * them if needed but the odds are very low that an existing matching
+ * introduction circuit exists at that stage. */
+void
+hs_client_close_intro_circuits_from_desc(const hs_descriptor_t *desc)
+{
+  origin_circuit_t *ocirc = NULL;
+
+  tor_assert(desc);
+
+  /* We iterate over all client intro circuits because they aren't kept in the
+   * HS circuitmap. That is probably something we want to do one day. */
+  while ((ocirc = circuit_get_next_intro_circ(ocirc, true))) {
+    if (ocirc->hs_ident == NULL) {
+      /* Not a v3 circuit, ignore it. */
+      continue;
+    }
+
+    /* Does it match any IP in the given descriptor? If not, ignore. */
+    if (find_desc_intro_point_by_ident(ocirc->hs_ident, desc) == NULL) {
+      continue;
+    }
+
+    /* We have a match. Close the circuit as consider it expired. */
+    circuit_mark_for_close(TO_CIRCUIT(ocirc), END_CIRC_REASON_FINISHED);
+  }
+}
+
 /* Release all the storage held by the client subsystem. */
 void
 hs_client_free_all(void)
diff --git a/src/feature/hs/hs_client.h b/src/feature/hs/hs_client.h
index fb4f9e9e9..f6fb167ea 100644
--- a/src/feature/hs/hs_client.h
+++ b/src/feature/hs/hs_client.h
@@ -77,6 +77,7 @@ int hs_config_client_authorization(const or_options_t *options,
                                    int validate_only);
 
 int hs_client_reextend_intro_circuit(origin_circuit_t *circ);
+void hs_client_close_intro_circuits_from_desc(const hs_descriptor_t *desc);
 
 void hs_client_purge_state(void);
 
diff --git a/src/feature/rend/rendservice.c b/src/feature/rend/rendservice.c
index bae9da3fe..d13558106 100644
--- a/src/feature/rend/rendservice.c
+++ b/src/feature/rend/rendservice.c
@@ -631,7 +631,7 @@ rend_service_prune_list_impl_(void)
 
   /* For every service introduction circuit we can find, see if we have a
    * matching surviving configured service. If not, close the circuit. */
-  while ((ocirc = circuit_get_next_service_intro_circ(ocirc))) {
+  while ((ocirc = circuit_get_next_intro_circ(ocirc, false))) {
     int keep_it = 0;
     if (ocirc->rend_data == NULL) {
       /* This is a v3 circuit, ignore it. */





More information about the tor-commits mailing list