[tor-commits] [translation/liveusb-creator_completed] Update translations for liveusb-creator_completed
translation at torproject.org
translation at torproject.org
Fri Sep 15 23:15:48 UTC 2017
commit 2a682e66f44a1ba4bd24cca8c82ee124454afd4b
Author: Translation commit bot <translation at torproject.org>
Date: Fri Sep 15 23:15:46 2017 +0000
Update translations for liveusb-creator_completed
---
da/da.po | 244 +++++++++++++++++++++++++++++++--------------------------------
1 file changed, 122 insertions(+), 122 deletions(-)
diff --git a/da/da.po b/da/da.po
index 92ea1a3ce..c061068b1 100644
--- a/da/da.po
+++ b/da/da.po
@@ -19,8 +19,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2017-06-10 07:50+0200\n"
-"PO-Revision-Date: 2017-06-20 10:22+0000\n"
+"POT-Creation-Date: 2017-09-14 14:52+0200\n"
+"PO-Revision-Date: 2017-09-15 23:13+0000\n"
"Last-Translator: scootergrisen\n"
"Language-Team: Danish (http://www.transifex.com/otf/torproject/language/da/)\n"
"MIME-Version: 1.0\n"
@@ -29,262 +29,262 @@ msgstr ""
"Language: da\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../tails_installer/creator.py:100
+#: ../tails_installer/creator.py:101
msgid "You must run this application as root"
msgstr "Du skal køre dette program som root"
-#: ../tails_installer/creator.py:146
+#: ../tails_installer/creator.py:147
msgid "Extracting live image to the target device..."
msgstr "Udpakker det direkte foto til den valgte enhed..."
-#: ../tails_installer/creator.py:153
+#: ../tails_installer/creator.py:154
#, python-format
msgid "Wrote to device at %(speed)d MB/sec"
msgstr "Skrev til enhed med %(speed)d MB/s"
-#: ../tails_installer/creator.py:183
+#: ../tails_installer/creator.py:184
msgid "Setting up OLPC boot file..."
msgstr "Opretter OLPC opstartsfil..."
-#: ../tails_installer/creator.py:302
+#: ../tails_installer/creator.py:321
#, python-format
msgid ""
"There was a problem executing the following command: `%(command)s`.\n"
"A more detailed error log has been written to '%(filename)s'."
msgstr "Der opstod et problem under kørsel af følgende kommando: \"%(command)s\".\nEn mere detaljeret fejllog er blevet skrevet til \"%(filename)s\"."
-#: ../tails_installer/creator.py:321
+#: ../tails_installer/creator.py:340
msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr "Verificerer SHA1-kontrolsum af LiveCD-aftrykket..."
-#: ../tails_installer/creator.py:325
+#: ../tails_installer/creator.py:344
msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr "Verificerer SHA256-kontrolsum af LiveCD-aftrykket..."
-#: ../tails_installer/creator.py:341
+#: ../tails_installer/creator.py:360
msgid ""
"Error: The SHA1 of your Live CD is invalid. You can run this program with "
"the --noverify argument to bypass this verification check."
msgstr "Fejl: SHA1'et på din live-CD er ugyldig. Du kan køre dette program med \"--noverify\"-argumentet for at springe over denne verificeringskontrol."
-#: ../tails_installer/creator.py:347
+#: ../tails_installer/creator.py:366
msgid "Unknown ISO, skipping checksum verification"
msgstr "Ukendt ISO, undlader verifikation af kontrolsum"
-#: ../tails_installer/creator.py:358
+#: ../tails_installer/creator.py:377
#, python-format
msgid ""
"Not enough free space on device.\n"
"%dMB ISO + %dMB overlay > %dMB free space"
msgstr "Der er ikke tilstrækkelig ledig plads på enheden.\n%dMB ISO + %dMB ekstra > %dMB fri plads"
-#: ../tails_installer/creator.py:365
+#: ../tails_installer/creator.py:384
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Opretter %sMB vedvarende overlæg"
-#: ../tails_installer/creator.py:426
+#: ../tails_installer/creator.py:445
#, python-format
msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr "Kan ikke kopiere %(infile)s til %(outfile)s: %(message)s"
-#: ../tails_installer/creator.py:440
+#: ../tails_installer/creator.py:459
msgid "Removing existing Live OS"
msgstr "Fjerner eksisterende Live OS"
-#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#: ../tails_installer/creator.py:468 ../tails_installer/creator.py:479
#, python-format
msgid "Unable to chmod %(file)s: %(message)s"
msgstr "Kan ikke chmod %(file)s: %(message)s"
-#: ../tails_installer/creator.py:453
+#: ../tails_installer/creator.py:472
#, python-format
msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr "Kan ikke fjerne fil fra tidligere LiveOS: %(message)s"
-#: ../tails_installer/creator.py:465
+#: ../tails_installer/creator.py:484
#, python-format
msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr "Kan ikke fjerne mappe fra tidligere LiveOS: %(message)s"
-#: ../tails_installer/creator.py:513
+#: ../tails_installer/creator.py:532
#, python-format
msgid "Cannot find device %s"
msgstr "Kan ikke finde enhed %s"
-#: ../tails_installer/creator.py:678
+#: ../tails_installer/creator.py:699
#, python-format
msgid "Unable to write on %(device)s, skipping."
msgstr "Kan ikke skrive til %(device)s, springer over."
-#: ../tails_installer/creator.py:697
+#: ../tails_installer/creator.py:719
#, python-format
msgid ""
"Some partitions of the target device %(device)s are mounted. They will be "
"unmounted before starting the installation process."
msgstr "Nogle partitioner på den valgte enhed %(device)s er i brug. De vil alle blive skubbet ud før installationen starter."
-#: ../tails_installer/creator.py:740 ../tails_installer/creator.py:964
+#: ../tails_installer/creator.py:762 ../tails_installer/creator.py:986
msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr "Ukendt filsystem. Din enhed skal måske formateres igen."
-#: ../tails_installer/creator.py:743 ../tails_installer/creator.py:967
+#: ../tails_installer/creator.py:765 ../tails_installer/creator.py:989
#, python-format
msgid "Unsupported filesystem: %s"
msgstr "Filsystem understøttes ikke: %s"
-#: ../tails_installer/creator.py:760
+#: ../tails_installer/creator.py:782
#, python-format
msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr "Ukendt GLib-undtagelse ved forsøg på at montere enhed: %(message)s"
-#: ../tails_installer/creator.py:764
+#: ../tails_installer/creator.py:786
#, python-format
msgid "Unable to mount device: %(message)s"
msgstr "Kunne ikke tilslutte enhed: %(message)s"
-#: ../tails_installer/creator.py:769
+#: ../tails_installer/creator.py:791
msgid "No mount points found"
msgstr "Fandt ingen tilslutningspunkter"
-#: ../tails_installer/creator.py:780
+#: ../tails_installer/creator.py:802
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "Starter afmontering for \"%(device)s\""
-#: ../tails_installer/creator.py:790
+#: ../tails_installer/creator.py:812
#, python-format
msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr "Afmonterer monterede filsystemer på \"%(device)s\""
-#: ../tails_installer/creator.py:794
+#: ../tails_installer/creator.py:816
#, python-format
msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr "Afmonterer \"%(udi)s\" på \"%(device)s\""
-#: ../tails_installer/creator.py:804
+#: ../tails_installer/creator.py:826
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Tilslutning %s eksisterer efter frakobling"
-#: ../tails_installer/creator.py:817
+#: ../tails_installer/creator.py:839
#, python-format
msgid "Partitioning device %(device)s"
msgstr "Partitionerer enheden %(device)s"
-#: ../tails_installer/creator.py:895
+#: ../tails_installer/creator.py:917
#, python-format
msgid "Updating properties of system partition %(system_partition)s"
msgstr "Opdaterer indstillingerne på system partitionen %(system_partition)s"
-#: ../tails_installer/creator.py:949
+#: ../tails_installer/creator.py:971
#, python-format
msgid "Unsupported device '%(device)s', please report a bug."
msgstr "Enheden \"%(device)s\" understøttes ikke. Rapportér venligst en fejl."
-#: ../tails_installer/creator.py:952
+#: ../tails_installer/creator.py:974
msgid "Trying to continue anyway."
msgstr "Prøver at forsætte alligevel."
-#: ../tails_installer/creator.py:961 ../tails_installer/creator.py:1354
+#: ../tails_installer/creator.py:983 ../tails_installer/creator.py:1376
msgid "Verifying filesystem..."
msgstr "Verificerer filsystem..."
-#: ../tails_installer/creator.py:985
+#: ../tails_installer/creator.py:1007
#, python-format
msgid "Unable to change volume label: %(message)s"
msgstr "Kan ikke ændre drev-navn: %(message)s"
-#: ../tails_installer/creator.py:990 ../tails_installer/creator.py:1387
+#: ../tails_installer/creator.py:1012 ../tails_installer/creator.py:1409
msgid "Installing bootloader..."
msgstr "Installerer opstartsindlæser..."
-#: ../tails_installer/creator.py:1016
+#: ../tails_installer/creator.py:1038
#, python-format
msgid "Could not find the '%s' COM32 module"
msgstr "Kunne ikke finde '%s' COM32-modulet"
-#: ../tails_installer/creator.py:1024 ../tails_installer/creator.py:1405
+#: ../tails_installer/creator.py:1046 ../tails_installer/creator.py:1427
#, python-format
msgid "Removing %(file)s"
msgstr "Fjerner %(file)s"
-#: ../tails_installer/creator.py:1136
+#: ../tails_installer/creator.py:1158
#, python-format
msgid "%s already bootable"
msgstr "%s er allerede i stand til at starte"
-#: ../tails_installer/creator.py:1156
+#: ../tails_installer/creator.py:1178
msgid "Unable to find partition"
msgstr "Kan ikke finde partition"
-#: ../tails_installer/creator.py:1179
+#: ../tails_installer/creator.py:1201
#, python-format
msgid "Formatting %(device)s as FAT32"
msgstr "Formatterer %(device)s som FAT32"
-#: ../tails_installer/creator.py:1239
+#: ../tails_installer/creator.py:1261
msgid "Could not find syslinux' gptmbr.bin"
msgstr "Kunne ikke finde syslinux' gptmbr.bin"
-#: ../tails_installer/creator.py:1252
+#: ../tails_installer/creator.py:1274
#, python-format
msgid "Reading extracted MBR from %s"
msgstr "Læser udtrukket MBR fra %s"
-#: ../tails_installer/creator.py:1256
+#: ../tails_installer/creator.py:1278
#, python-format
msgid "Could not read the extracted MBR from %(path)s"
msgstr "Kunne ikke læse den udtrukne MBR fra %(path)s"
-#: ../tails_installer/creator.py:1269 ../tails_installer/creator.py:1270
+#: ../tails_installer/creator.py:1291 ../tails_installer/creator.py:1292
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Nulstiller Master Boot Record for %s"
-#: ../tails_installer/creator.py:1275
+#: ../tails_installer/creator.py:1297
msgid "Drive is a loopback, skipping MBR reset"
msgstr "Drevet er et loopback, springer nulstilling af MBR over"
-#: ../tails_installer/creator.py:1279 ../tails_installer/creator.py:1533
+#: ../tails_installer/creator.py:1301 ../tails_installer/creator.py:1555
#, python-format
msgid "Calculating the SHA1 of %s"
msgstr "Beregner SHA1 for %s"
-#: ../tails_installer/creator.py:1304
+#: ../tails_installer/creator.py:1326
msgid "Synchronizing data on disk..."
msgstr "Synkroniserer data på disk..."
-#: ../tails_installer/creator.py:1346
+#: ../tails_installer/creator.py:1368
msgid "Error probing device"
msgstr "Fejl ved undersøgelse af enhed"
-#: ../tails_installer/creator.py:1348
+#: ../tails_installer/creator.py:1370
msgid "Unable to find any supported device"
msgstr "Kunne ikke finde nogen understøttede enheder"
-#: ../tails_installer/creator.py:1358
+#: ../tails_installer/creator.py:1380
msgid ""
"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr "Vær sikker på at din USB-nøgle er tilsluttet og formateret med FAT-filsystemet"
-#: ../tails_installer/creator.py:1361
+#: ../tails_installer/creator.py:1383
#, python-format
msgid ""
"Unsupported filesystem: %s\n"
"Please backup and format your USB key with the FAT filesystem."
msgstr "Filsystem understøttes ikke: %s\nForetag venligst en sikkerhedskopi og formatér din USB-nøgle med FAT-filsystemet."
-#: ../tails_installer/creator.py:1428
+#: ../tails_installer/creator.py:1450
msgid ""
"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr "Kan ikke få Win32_LogicalDisk; win32com forespørgslen returnerede ingen resultater"
-#: ../tails_installer/creator.py:1481
+#: ../tails_installer/creator.py:1503
msgid "Cannot find"
msgstr "Kan ikke finde"
-#: ../tails_installer/creator.py:1482
+#: ../tails_installer/creator.py:1504
msgid ""
"Make sure to extract the entire tails-installer zip file before running this"
" program."
@@ -300,52 +300,55 @@ msgstr "Ukendt udgivelse: %s"
msgid "Downloading %s..."
msgstr "Downloader %s..."
-#: ../tails_installer/gui.py:204
+#: ../tails_installer/gui.py:209
msgid ""
"Error: Cannot set the label or obtain the UUID of your device. Unable to "
"continue."
msgstr "Fejl: Kunne ikke sætte etiket eller finde enhedens UUID. Kan ikke fortsætte."
-#: ../tails_installer/gui.py:253
+#: ../tails_installer/gui.py:258
#, python-format
msgid "Installation complete! (%s)"
msgstr "Installation færdig! (%s)"
-#: ../tails_installer/gui.py:258
+#: ../tails_installer/gui.py:263
msgid "Tails installation failed!"
msgstr "Tails installation mislykkedes!"
-#: ../tails_installer/gui.py:353
+#: ../tails_installer/gui.py:364
msgid ""
"Warning: This tool needs to be run as an Administrator. To do this, right "
"click on the icon and open the Properties. Under the Compatibility tab, "
"check the \"Run this program as an administrator\" box."
msgstr "Advarsel: Dette værktøj skal køres som en administrator. For dette, højreklik på ikonet og åbn egenskaberne. Under kompatibilitetsfanebladet afkrydses boksen »Kør dette program som en administrator«."
-#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+#: ../tails_installer/gui.py:376 ../tails_installer/launcher.py:31
msgid "Tails Installer"
msgstr "Tails-installationsprogram"
-#: ../tails_installer/gui.py:440
+#: ../tails_installer/gui.py:473
+#, python-format
+msgid "%(size)s %(vendor)s %(model)s device (%(device)s)"
+msgstr "%(size)s %(vendor)s %(model)s enhed (%(device)s)"
+
+#: ../tails_installer/gui.py:484
+msgid "No ISO image selected"
+msgstr "Ingen ISO-aftryk valgt"
+
+#: ../tails_installer/gui.py:485
+msgid "Please select a Tails ISO image."
+msgstr "Vælg venligst et Tails ISO-aftryk."
+
+#: ../tails_installer/gui.py:524
msgid "No device suitable to install Tails could be found"
msgstr "Der kunne ikke findes nogen egnet enhed til installation af Tails"
-#: ../tails_installer/gui.py:442
+#: ../tails_installer/gui.py:526
#, python-format
msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr "Isæt venligst et USB-flash-drev eller SD-kort på mindst %0.1f GB."
-#: ../tails_installer/gui.py:474
-#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
-
-#: ../tails_installer/gui.py:480
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-
-#: ../tails_installer/gui.py:488
+#: ../tails_installer/gui.py:560
#, python-format
msgid ""
"The USB stick \"%(pretty_name)s\" is configured as non-removable by its "
@@ -353,97 +356,82 @@ msgid ""
"different model."
msgstr "USB-pennen \"%(pretty_name)s\" er konfigureret som ikke-flytbar af dens producent og Tails vil ikke kunne start fra den. Prøv venligst at installere en anden model."
-#: ../tails_installer/gui.py:498
+#: ../tails_installer/gui.py:570
#, python-format
msgid ""
"The device \"%(pretty_name)s\" is too small to install Tails (at least "
"%(size)s GB is required)."
msgstr "Enheden \"%(pretty_name)s\" har ikke plads nok til at installere Tails (kræver mindst %(size)s GB)."
-#: ../tails_installer/gui.py:511
-msgid "\"Install by cloning\""
-msgstr "\"Installer ved kloning\""
-
-#: ../tails_installer/gui.py:513
-msgid "\"Install from ISO\""
-msgstr "\"Installer fra ISO\""
-
-#: ../tails_installer/gui.py:514
-#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Det er ikke muligt at opgradere enheden %(pretty_name)s fordi den ikke er oprettet med Tails-installationsprogrammet. Brug i stedet %(action)s til at opgradere Tails på denne enhed."
-
-#: ../tails_installer/gui.py:533
+#: ../tails_installer/gui.py:592
msgid "An error happened while installing Tails"
msgstr "Der opstod fejl ved installation af Tails"
-#: ../tails_installer/gui.py:545
+#: ../tails_installer/gui.py:604
msgid "Refreshing releases..."
msgstr "Genopfrisker udgivelser..."
-#: ../tails_installer/gui.py:550
+#: ../tails_installer/gui.py:609
msgid "Releases updated!"
msgstr "Udgivelser opdateret!"
-#: ../tails_installer/gui.py:589
+#: ../tails_installer/gui.py:651
msgid "Installation complete!"
msgstr "Installation færdig!"
-#: ../tails_installer/gui.py:590
+#: ../tails_installer/gui.py:652
msgid "Installation was completed."
msgstr "Installation blev fuldført."
-#: ../tails_installer/gui.py:635
+#: ../tails_installer/gui.py:701
msgid "Unable to mount device"
msgstr "Kan ikke tilslutte enhed"
-#: ../tails_installer/gui.py:642 ../tails_installer/gui.py:670
-msgid "Please confirm your device selection"
-msgstr "Bekræft venligst dit valg af enhed"
+#: ../tails_installer/gui.py:708 ../tails_installer/gui.py:736
+msgid "Confirm the target USB stick"
+msgstr "Bekræft mål USB-pennen"
-#: ../tails_installer/gui.py:643
+#: ../tails_installer/gui.py:709
#, python-format
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Du har valgt at installere Tails på %(size)s %(vendor)s %(model)s enheden (%(device)s). Alt data på den valgte enhed tabes. Fortsæt?"
+"%(size)s %(vendor)s %(model)s device (%(device)s)\n"
+"\n"
+"All data on this USB stick will be lost."
+msgstr "%(size)s %(vendor)s %(model)s enhed (%(device)s)\n\nAl data på denne USB-pen vil gå tabt."
-#: ../tails_installer/gui.py:660
+#: ../tails_installer/gui.py:728
#, python-format
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Du skal til at opgradere Tails på %(parent_size)s %(vendor)s %(model)s enheden (%(device)s). Enhver vedvarende partition på enheden ændres ikke. Fortsæt?"
+"%(vendor)s %(model)s device (%(device)s)\n"
+"\n"
+"%(persistence_message)s"
+msgstr "%(vendor)s %(model)s enhed (%(device)s)\n\n%(persistence_message)s"
-#: ../tails_installer/gui.py:716
+#: ../tails_installer/gui.py:782
msgid "Download complete!"
msgstr "Download udført!"
-#: ../tails_installer/gui.py:720
+#: ../tails_installer/gui.py:786
msgid "Download failed: "
msgstr "Download fejlede: "
-#: ../tails_installer/gui.py:721
+#: ../tails_installer/gui.py:787
msgid "You can try again to resume your download"
msgstr "Du kan prøve at genoptage din download"
-#: ../tails_installer/gui.py:729
+#: ../tails_installer/gui.py:795
msgid ""
"The selected file is unreadable. Please fix its permissions or select "
"another file."
msgstr "Den valgte fil er ikke læsbar. Du kan enten ændre filtilladelserne eller vælge en anden fil."
-#: ../tails_installer/gui.py:735
+#: ../tails_installer/gui.py:801
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Kan ikke bruge den valgte fil. Prøv i stedet at flytte din ISO til roden af dit drev (dvs. C:\\)"
-#: ../tails_installer/gui.py:741
+#: ../tails_installer/gui.py:807
#, python-format
msgid "%(filename)s selected"
msgstr "%(filename)s valgt"
@@ -487,23 +475,35 @@ msgid ""
"%s"
msgstr "Der opstod et problem ved eksekvering af `%s`.%s\n%s"
-#: ../tails_installer/utils.py:119
+#: ../tails_installer/utils.py:124
msgid "Could not open device for writing."
msgstr "Kunne ikke åbne enhed til skrivning."
#: ../data/tails-installer.ui.h:1
-msgid "Use existing Live system ISO:"
-msgstr "Brug eksisterende Live system-ISO:"
+msgid "Installation Instructions"
+msgstr "Installationsinstruktioner"
#: ../data/tails-installer.ui.h:2
-msgid "Select a distribution to download:"
-msgstr "Vælg en distribution som skal downloades:"
+msgid "Clone the current Tails"
+msgstr "Klon den nuværende Tails"
#: ../data/tails-installer.ui.h:3
-msgid "Target Device:"
-msgstr "Målenhed:"
+msgid "Use a downloaded Tails ISO image"
+msgstr "Brug et downloadet Tails ISO-aftryk"
#: ../data/tails-installer.ui.h:4
+msgid "Select a distribution to download:"
+msgstr "Vælg en distribution som skal downloades:"
+
+#: ../data/tails-installer.ui.h:5
+msgid "Target USB stick:"
+msgstr "Mål USB-pen:"
+
+#: ../data/tails-installer.ui.h:6
+msgid "Reinstall (delete all data)"
+msgstr "Geninstaller (slet al data)"
+
+#: ../data/tails-installer.ui.h:7
msgid "Install Tails"
msgstr "Installer Tails"
More information about the tor-commits
mailing list